Offres education manager à Cary, North Carolina - Page 5Créer des alertes d'emploi

Job Description JOB LOCATION: Raleigh, NC POSITIONS AVAILABLE: 5 PRIMARY FUNCTION: Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on road beds, parking lots, airport runways and taxiways. May perform minor repairs and maintain equipment in addition to other duties. ESSENTIAL DUTIES: Utilities Division Heavy Equipment Operators 1.) Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment. 2.) Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms. 3.) Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain. 4.) Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds or other job sites as needed. 5.) Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications. 6.) Observe grade in order to adjust machine settings and indicate low spots for workers to add material. 7.) Conduct documented pre-shift inspections of equipment for safety and mechanical defects. 8.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year. 10.) Align machines, cutter heads, or depth gauge makers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers. 11.) Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members. 12.) Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors. 13.) Learn and follow safety regulations. 14.) Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects. 15.) Perform necessary work while complying with all company policies and procedures. 16.) Perform additional duties as required or directed by their immediate supervisor or other manager. 17.) Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: • High school diploma or GED, • Must be a minimum of 18 years old. Work Experience: • Must be able to operate multiple pieces of equipment., • Must be willing to use hand tools while not operating equipment., • Minimum of 3 years' operating and utility work experience., • Must have a good work ethic and work as a team player; including operating different types of equipment and general labor work if needed. SPECAL QUALIFICATIONS: Experience pulling trench boxes and sloping excavations. Heavy Physical Demands: Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required. Physical Activity: Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job Description "Wake Enterprises" Wake Enterprises, Inc. (WE) is a private, nonprofit organization whose mission is to provide meaningful and innovative experiences to enhance the lives of the people we serve. Currently seeking: Program Services Manager Position Purpose The Program Services Manager is responsible for creating a safe, supportive environment that promotes emotional well-being and quality care, while providing oversight to ensure services align with program standards, regulations, and best practices. Additionally, The Program Services Manager develops program goals and objectives that reflect the needs of the participants served. The Program Services Manager ensures compliance with agency, accreditation, local, state and federal standards for programs. The Program Services Manager is held accountable for ensuring that the program is managed and held to the highest standards. This includes clinical quality, quality assurance, financial management, funder requirements, recruitment and retention, communications, compliance, revenue cycle, and general program operations. Reviews workload balance and procedural concerns, and addresses these with the executive director as needed. Responsibilities Leadership • Adheres to Wake Enterprises Code of Ethics., • Directly supervises QDDPs, • Develops and monitors program(s) using key performance indicators and metrics to ensure quality staff support, fiscal responsibility, effective oversight, and ongoing program development., • Responsible for all plans of correction and addressing all complaints and grievances in a timely and thorough manner., • Oversee and participates in the recruitment, hiring, training, evaluation and disciplinary process for all employees., • Effectively communicates program needs to staff and initiates policies necessary in the operation of the agency., • Allocates talent and resources among direct reports to ensure adequate participant supervision and smooth operation of service sites and community-based services., • Assures that no person is subject to abuse, neglect, and/or exploitation., • Recognizes obligation to report any suspected abuse, neglect, and/or exploitation., • Ensures that all participants have current and appropriate treatment plans and/or required documentation in place, that their needs are met, and that they are receiving trauma-informed evidence based care., • Establishes and maintains working relationships with professionals, staff, parents and participants. Confers with parents, outside agency administrators, testing specialists, social workers and others to develop or review a participant’s program., • Monitor and ensure all required, regulatory documentation is complete, accurate and submitted in a timely manner., • Collaborates with the Executive Director and revenue cycle team to ensure that all participants have current authorizations, if necessary and that all services and related documentation are accurately and promptly entered into the electronic health record according to policy. Supports the resolution of outstanding/unpaid services and claims., • Communicate funder/government information to employees to ensure understanding and compliance and attend local funder/government meetings, as requested by the Executive Director Required Education and Qualifications: • Bachelor’s degree in Special Education, Psychology, Social Work, Counseling, or closely related field from a four-year college or university and two year’s related experience or training; or four to six years related experience and/or training; or an equivalent combination of education and experience. Prefer Qualified Developmental Disabilities Professional (QDDP) qualifications., • Must have a valid North Carolina Driver’s License, personal vehicle and insurance and be eligible to be placed on Wake Enterprises insurance coverage., • Must have NCI certification., • Must have First Aid/CPR Certification., • Intellectual Disability Service: Knowledge of community resources and services for persons with intellectual disabilities, mental health disorders, and their families., • Problem Solving: Ability to recognize when something is wrong, or is likely to go wrong, and take the necessary actions to prevent or mitigate the problem. Demonstrates sound judgment by gathering and analyzing information skillfully and taking appropriate and timely actions regarding questionable findings or concerns., • Team work: Committed to both organizational goals and team objectives. Has a good relationship with managers, peers, and supervisees, and is willing to support colleagues., • Leadership: Facilitates organizational change as it relates to IDS and the use of data; has the ability to understand, relate with, and adapt to different cultural settings; and demonstrates good judgement and maturity., • Inductive Reasoning: Excellent observation skills and the ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events)., • Written Communication: Ability to communicate effectively in written form including, editing work for spelling and grammar, present numerical data clearly, concisely and accurately., • Oral Communication: Ability to orally communicate with others, including providing direction and feedback, exchange of information and ideas, explain complex concepts and processes, utilize effective non-verbal skills, ask insightful questions, and persuade others., • Interpersonal Sensitivity: Demonstrates the ability to listen to and understand feelings of others. Works with others well, in an effective way, and establishes and maintains relationships. : Ensures that tasks/duties/activities, projects and goals are accomplished accurately and in a timely manner., • Quality and Control: Demonstrates accuracy and thoroughness, monitors own work and that of supervisees to ensure quality, and is detail-oriented when working towards agreed upon goals and objectives., • Adaptability: Ability to multitask, prioritize, and adapt to changes in the work environment; manages completing demands and ability to deal with frequent change, delays or unexpected events; and ability to work under emergency conditions, when applicable., • Dependability: Ability to consistently report to work and on time, follow instructions, respond to management direction, and solicit feedback to improve performance., • Stress Tolerance: Recognize crisis situations and react to such in a calm, mature manner; accept criticism and deal calmly and effectively with high stress situations; and the ability to identify, react to, and report security concerns, as applicable., • Ethical Decision Making: Ability make sound judgments professional judgments consistent with the Connection’s Code of Ethics Job Types: Full-time Salary: $50,000 - $60,000 Benefits: 401(k) Health Insurance Dental and Vision insurance Employee discount Flexible spending account Life insurance Paid time off Apis Services, Inc. (a wholly-owned subsidiary of Inperium, Inc.) provides a progressive platform for delivering Shared Services to Inperium and its Constellation of affiliate companies. Allowing these entities to advance their mission and vision. By exploring geographical program expansion and focusing on quality outcome measures to create cost savings that result in reinvestment into the organizations stakeholders through capacity creation and employee compensation betterments. Apis Services, INC and affiliate’s provides equal employment opportunities for all employees and applicants for employment in compliance with all federal and all applicable state and local laws and regulations, including nondiscrimination in hiring and employment. All employment decisions are made without regard to race, color, religion, gender, national origin, ancestry, age, sexual orientation, gender identity and expression, disability, genetic information, marital status, pregnancy/childbirth, veteran status or any other basis protected by law. This policy of non-discrimination and equal employment opportunities extends to every phase and aspect of hiring and employment."

Job DescriptionDescription: Location: Raleigh Radiology, All locations: Blue Ridge, Cary, Clayton, Fuquay-Varina, Knightdale, Oberlin, Wake Forest, future location located in Holly Springs M-F Status: PRN General sonography in an outpatient setting, including but not limited to abdominal, small parts, breast, obstetric, pediatric, MSK, interventional, biopsy, and vascular exams. Requirements: INTRODUCTION A. This position is located within each of Raleigh Radiology's free-standing outpatient imaging centers. B. The primary function of the registered sonographer at Raleigh Radiology is to provide ultrasound studies to outpatients. In Addition, if RT registered will provide radiological outpatient procedures. C. The technologist is responsible for the coordination of patient care. She/He follows established protocols, policies, procedures, and specific instructions. D. The technologist is registered in the following modalities: Sonography. Rotation through other modalities is required to assist as trained and when necessary. E. This position reports to the Clinical Manager. MAJOR DUTIES AND RESPONSIBILITIES 1. General Diagnostic Duties 50% a) Maintains standards of professional care and maintains patient confidentiality. b) Implement policies and procedures of Raleigh Radiology. c) Performs ordered procedures in a safe, efficient, and professional manner to include all required views. d) Assesses patient’s condition (physical and psychosocial); prioritizes needs, sets goals, and responds appropriately to meet those needs, which includes discharge teaching. e) Reports and records pertinent observations and reactions to care rendered. f) Assists with specific tests and procedures as needed. g) Participates in the economical utilization of supplies. h) Assures that equipment is always maintained and available for use. i) Assists co-workers and physicians in giving care to patients. j) Establishes and maintains open communication. k) Utilizes teaching opportunities with patients and other significant individuals. l) Assists with / or institutes emergency measures for sudden adverse occurrences in patients. m) Maintains a clean, safe, and well-maintained supplied environment for patients and staff. n) On a regular, sustained basis, cooperates with other staff members both inside and outside the department in accomplishment of own job duties as well as assisting other in accomplishing theirs; serves as a team player and role model for other employees in the organization, always exhibiting traits of courtesy, caring, helpfulness and respect; conducts oneself in a service-oriented manner that is attentive, pleasant, cooperative, sensitive, respectful and kind when dealing with team members, visitors, public and all employees. o) Performs other duties and accepts responsibility, as assigned. 2. Patient Care Activities 35% a) Obtains initial history and assessment. b) Completes and documents history sheets. c) Engages with patients to ensure a positive patient experience. d) Performs assessment that may include: i) Vital signs, lab value interpretation ii) History of recent complaint (the reason for procedure) iii) Brief pertinent medical history iv) Complete list of medications and dosages if necessary v) Allergies vi) Other pertinent assessment facts such as LMP, medical history, weight, etc. e) Observes and assesses patients on an ongoing basis throughout the patient visit to Raleigh Radiology. i) Assesses the patient’s physical and psychological state as well as his or her responses to the procedure. ii) Assesses and reflects the condition of patients accurately. iii) Assesses (when appropriate) neuro checks, breath sounds, etc, as instructed by the supervising Radiologist or referring MD. Notifies appropriate entity when emergency situations arise. iv) Starts emergency procedures up to and including CPR. v) Documents assessments/changes in condition in RIS. vi) Assesses and documents patient knowledge and understanding of the procedure and aftercare, when appropriate to the procedure being performed. (1) Documents in RIS that teaching or after-care instructions provided. (2) Documents when referring MD is contacted in RIS and provides written instruction to patient to assure follow-through. (3) Follows up inappropriate time frame on condition of patients who suffer adverse reactions (4) Completes required documentation for pathology. (5) Documents appropriate information on forms used by Raleigh Radiology. f) Provides accurate information re patient history to the Radiologist in order for him/her to interpret images with accuracy and proper history. i) Be concise and accurately reflect physiological facts regarding each patient. ii) Relay reports immediately upon completion of the procedure when instructed to do so (Quick Read/Call Report) iii) Initiate communication directly with peers or other appropriate personnel relative to providing continuous quality patient ca 3. Safety/Infection Control 10% a) Adheres to safety/infection control policies and procedures. b) Reports unsafe equipment and assures follow-up. c) Assesses patients and plans appropriately for safety/infection control. d) Assures that all equipment necessary for the provision of care is readily available and in working order. e) Reports incidents and unusual occurrences according to department policies. f) Wears protective aprons, eyewear, masks, gloves, and radiation monitoring devices, as required for each procedure. 4. Other Duties 5% a) Uses the principles of growth and development to assess each patient’s age-specific needs and provide age specific treatment and care. b) Maintains the strictest confidentiality of all facility and facility-related employee/patient information. c) Performs other duties as assigned. 100% III. EDUCATION, EXPERIENCE, CERTIFICATION, LICENSURE A. Education: · American Registry for Diagnostic Medical Sonography (ARDMS): RDMS(AB), (OB/GYN), or (PS), and/or RVT(VT); [Breast (BR) specialty earned prior to 2011 will be accepted; RMSKS credential is not accepted] · American Registry of Radiologic Technologists (ARRT): RT(S) or RT(VS); [Breast (BS) specialty earned prior to 2011 will be accepted] · Cardiovascular Credentialing International (CCI): RVS · Performing ultrasound prior to and continuously since October 1996 AND evaluated by responsible physician to assure competence • Please note: we will accept new graduates who can become registered within 30 days of hire B. Experience: Previous experience in a busy office or hospital is preferred. C. Certification: 1. CPR is required or must be obtained within the first 6-months of employment. Continuous certification in CPR is required., 2. Successful completion of Ultrasound registry with the American Registry of Diagnostic Medical Sonographers must be achieved within 12-months of employment. D. Licensure: None IV. DESIRED SKILLS Basic patient care skills, including first-aid and CPR. Excellent technical skills in ultrasound are required. Ability to work independently, make sound decisions based on patient condition and ability to follow directions. Flexibility, dependability and professionalism required. V. WORKING CONDITIONS / PHYSICAL REQUIREMENTS Must be able to read without strain printed material the size of typewriter characters, glasses permitted, and the ability to hear the conversational voice, with or without a hearing aid, or the ability to compensate satisfactorily; may be exposed to infections and contagious diseases. Frequent, prolonged periods of standing and/or walking. Lifts, positions, pushes or transfers patients. Subject to rotating holidays or shifts. VI. NATURE OF SUPERVISION The Registered Sonographer functions with oversight by the Radiologists and Clinical Manager although considerable independent work is required. Review of work is generally limited to assurance that works performed are in accordance with policies and procedures as judged by the Radiologist. The employee is expected to inform management when unforeseen events/circumstances require significant changes.

Job DescriptionDescription: Job Summary: The Project Manager is responsible for the overall success of assigned construction projects, ensuring they are completed on time, within budget, and in compliance with contract and company guidelines. This role also cultivates client relationships, oversees project teams, and contributes to business development. Duties/Responsibilities: • Collaborate with the team and Estimator during project handoff meetings to fully understand contract scope, budget, and timeline., • Develop and manage project schedules in coordination with Superintendents., • Conduct daily jobsite meetings and interface directly with clients and key stakeholders., • Administer subcontractor contracts and maintain detailed site documentation., • Supervise day-to-day project operations including labor management, cost tracking, and change order processing., • Approve project documentation including reports, invoices, reimbursables, and subcontractor evaluations., • Ensure job site safety and compliance with OSHA, company, and client standards., • Provide regular project updates to clients and submit monthly status reports and invoices., • Create and manage job budgets; monitor job costs and proactively address variances., • Act as the primary point of contact for project-related public relations, including inspectors, owners, vendors, and clients., • Contribute to company growth by maintaining client satisfaction and assisting in identifying new project opportunities., • Attend and contribute to management meetings., • Ensure all staff and supervisors under your direction understand their scope, schedules, and performance expectations., • Support the President in workforce planning to ensure sufficient manpower for current and upcoming projects., • Consistently enforce company policies and maintain confidentiality on proprietary matters. Requirements: Required Skills/Abilities: Examples: • Excellent verbal and written communication skills., • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Ability to function well in a high-paced environment., • Minimum 5 years of experience in project management within the construction industry., • Strong leadership skills with the ability to guide teams and manage multiple projects simultaneously., • Proficiency in Microsoft Project, Excel, Word, and project management software., • Thorough understanding of construction methods, scheduling, and budgeting., • Strong negotiation and organizational skills., • Ability to read and interpret architectural and engineering plans and specifications. Education and Experience: • Bachelor’s degree preferred, not required., • Minimum of 5 years' experience as a Project Manager in the construction industry, • North Carolina Driver’s License. Physical Requirements: The physical requirements for an office job typically include the ability to sit for extended periods, use a computer and other office equipment, and occasionally lift or carry office supplies up to 20 pounds. The role may require occasional standing, walking, or bending to file documents, attend meetings, or move between office areas. Frequent visits to job sites, including exposure to typical construction conditions and moderate-to-high noise levels. Must be able to safely navigate job sites, including uneven terrain and elevated platforms.

Job DescriptionDescription: Job Summary: Operate a variety of equipment including dump trucks, loaders, backhoes, tractors, groundskeeping equipment, snow removal equipment, power and hand tools, and other specialized maintenance and construction equipment; perform safety and maintenance inspections on assigned vehicle or equipment. Keep equipment fueled and in good shape. Duties/Responsibilities: • Mowing and trimming of turf, • Maintaining cleanliness and safety of golf course, • Planting and trimming of bushes/trees, • Spreading mulch or pine straw, • Raking bunkers, • Blowing leaves/debris, • Using small engine equipment to maintain golf courses, • Assisting in projects that require heavy equipment including tree removal, irrigation/drainage repair, moving of stone/large plants, etc., • Operating one or more types of heavy equipment safely and effectively so as not to damage equipment or turf or cause injury to persons, • Loading and unloading equipment from vehicles used to transport it, • Inspecting equipment before and after use to ensure it’s in good working order, • Monitoring equipment performance and adjusting settings as required to perform tasks correctly, • Notifying Equipment Manager if equipment requires repair or maintenance, • Cleaning equipment after use and disposing of any collected scraps or waste, • Completing minor repair work on courses as needed, • Loading or unloading debris from dump truck, pickup truck, or dumpster, • • Loading or unloading items from delivery trucks Benefits: • 401(k), • Dental insurance, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • A high attention to detail and awareness., • Ability to adequately understand and communicate in English., • Ability to work weekend mornings (every-other) and holidays (just morning)., • Ability to use small engine landscaping equipment and hand tools., • Knowledge of horticulture, agronomy or turf maintenance., • Knowledge of Golf course maintenance and construction., • Must have valid driver’s license., • Must be willing to learn how to operate new equipment., • Knowledge of heavy equipment machinery., • Ability to operate equipment with a high degree of competency, skill, and proficiency., • Ability to drive golf cart responsibly., • Ability to operate, or willingness to learn to operate, a manual shift utility vehicle responsibly. Education and Experience: 3+ of mid-heavy equipment operation Physical Requirements: • Heavy lifting (+50 pounds), • Carrying, pushing, pulling, stooping, kneeling, crouching, bending, reaching, walking long distances., • Driving and operating equipment for extended periods of time., • Requires focus adjustment, depth perception, clear close and distant vision., • Ability to work in all kinds of weather.

Job Description Construction Materials Project Manager Requisition Number: 2025-1050-13 S&ME is looking for an experienced Project Manager specializing in Construction Materials Testing (CMT) and Special Inspection (SI) projects to join our ever-growing team in Raleigh, North Carolina. If you're eager to advance your career by tackling more intricate projects, enhancing your technical and project management abilities, and collaborating with a fun and engaging team, we want to hear from you! At S&ME, we have a history of delivering innovative geotechnical, civil, environmental, and construction material testing for over 50 years. Over the decades, we have grown into a trusted partner for clients across various industries, including transportation, energy, water, waste management, education, government, commercial, industrial, and more. Our commitment to technical excellence and integrity has established us as a leader in our field. Why Work at S&ME? • Professional Growth: We believe in providing continuous learning opportunities, mentorship programs, and a supportive work environment. Let us tell you more about that!, • Innovative Projects: Join a team that works on diverse and challenging projects of all sizes and complexities, including but not limited to airports, solar farms, power plants, schools, trails, mixed-use, sports stadiums, dams, museums, and more., • Inclusive Culture: Our culture is built on collaboration and mutual respect. We want you to want to come into the office to build relationships, laugh together, learn from one another, and enjoy time with your teammates and colleagues., • Work-Life Balance: We believe in a flexible working environment, allowing you and your manager to determine how you can work most effectively and collaboratively to meet your client, team, and personal commitments., • Community Impact: Our work has a lasting, positive impact on the communities we serve. We pride ourselves on our technical excellence, quality work, and client satisfaction to continue making a difference. About The Role: As a Construction Materials Project Manager, you'll play a critical role in overseeing and managing materials testing and special inspection projects, ensuring the highest level of quality and compliance with industry standards. • Lead and manage Construction Materials Testing and Special Inspections projects of varying scales, overseeing every phase, including budget allocations, scheduling, and resource allocation., • Support field activities to deliver client and project needs., • Collaborate with clients to understand project requirements and ensure their satisfaction throughout the project lifecycle., • Supervise and mentor a team of professionals and field-based staff in client development and project management, providing guidance and training as needed., • Develop and maintain a local client base and professional network capable of generating sufficient revenue to meet financial objectives., • Support local business development and marketing efforts to expand market presence and opportunities., • Generate and review field and laboratory cost estimates and proposals in alignment with project plans, International Building Code (IBC) requirements, and client requests for proposals. About You: • You have a Bachelor's degree in Civil, Geotechnical, or a similar engineering field, • You have a minimum of 4 years of experience in construction materials testing and special inspection, • You have an Engineering Certification (EIT) and on track to obtain a Professional Engineer (PE) licensure in the future, • You have experience or desire to lead and manage projects, • You have a track record of business and technical writing success, • You have the ability to travel to project sites and collaborate in the field as needed Grow With Us: At S&ME, your career growth matters. You'll receive professional training, work on exciting projects, and be part of a company that truly invests in its people. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. S&ME provides a comprehensive benefits package to support you and your family, as well as career development resources. Come grow and thrive with us at S&ME! • Medical, Dental & Vision Plans with HSA and FSA options, • 100% Employee Stock Ownership Plan (ESOP), • 401K with Company Matching, • PTO with Rollover, • Maternity/Paternity Leave, • Employee Recognition Program, • Credential Incentive Program, • Tuition Reimbursement, • Company Vehicle with Fuel Card for Project-Based Work, • $2,000 Referral Bonuses & More! If you are seeking a challenging and rewarding career with a firm committed to our employees and providing quality service to our clients, join our team! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job DescriptionPosition Description:The CQV Senior Project Manager is responsible for leading services delivered to life sciences clients in all aspects of CQV-project execution and capital project Operational Readiness. Skills and Characteristics Required:- Significant experience in Project Management Principles and Practices- Demonstrated experience in successful Project Management processes- Expert in project execution throughout the entire project lifecycle- Intimately familiar with Project Planning, Initiation, Execution and Closeout requirements- Expertise in Project Risk Analysis- Mastery of skills in Stakeholder Engagement, Communications Management and Planning, and the various tools utilized by a successful Project Manager- Capable of translating Project Management execution to CAI’s Operational Readiness Model-Skilled in applying situational leadership to appropriately manage project resources, allocate time-budgets, check and adjust Requirements include:Position Requirements:10+ years of industry experience in Commissioning, Qualification, and Validation and/or Computer Systems Validation and related technical areasDemonstrated experience in successful project management processes, along with being an expert in project execution throughout the entire project lifecycle.Communicate impact on budget due to changes in scope and schedule. Understanding of Earned Value Management Other Requirements:Fluent in English Excellent oral and written communication skillsAble to travel domestically and internationally as required US Candidates must have been vaccinated or willing to be vaccinated for COVID-19 prior to starting employment About CAICAI is a 100% employee-owned company established in 1996 that has grown to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and other consulting services associated with operational readiness to FDA regulated and other mission-critical industries. Are You Ready?Our approach is simple; we put the client’s interests first, we do not stop until it is right, and we will do whatever it takes to get there.As owners of CAI, we are committed to living our Foundational Principles, both professionally and personally:We act with integrity.We serve each other.We serve society.We work for our future. With employee ownership, one person’s success is everyone’s success; we work diligently to accomplish team goals. We place Team Before Self, demonstrate Respect for Others, and possess a Can-Do Attitude (our core values). That is how we have grown exponentially. BenefitsOur full-time positions offer competitive compensation and benefits which include up to 15% retirement contribution, PTO and sick days, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company.#LI-MV1Average base salary range, not including benefits. CAI Benefits:•Comprehensive Health Insurance coverage•24 days of Paid Time Off•ESOP/401K - 15% Company Contribution (US Only)•Company paid Life Insurance•Company paid Long Term DisabilityPreference will be given to candidates currently located in Boston, MA, Raleigh, NC, Indianapolis, IN, San Diego, CA, San Francisco, CA, Seattle, WA, and Portland, OR. We are an equal opportunity employer; we are proud to employ veterans and promote diversity and inclusion in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all – our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Chance Act (FCA) / Fair Chance Ordinance (FCO). We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionThis role requires the ability to work lawfully in the U.S. without employment-based immigration sponsorship, now or in the future. JOB SUMMARY Connect people and communities by offering best-in-class telecommunication services through door-to-door solicitation of new prospective customers. MAJOR DUTIES AND RESPONSIBILITIES • Actively and consistently supports all efforts to simplify and enhance the customer experience., • Tenacious and driven, you excel in environments where your reward is based on your effort - uncapped potential, • Acquires new residential customers through door-to-door contact from assigned leads., • Conducts proactive consultative needs analysis with new prospective customers., • Develops and presents sales presentations/proposals on products and services that meet customers’ needs., • Accurately completes all necessary paperwork to support sales activities in a manner consistent with quality control guidelines, including but not limited to the following: dispositioning, entering sales orders, and reporting on sales., • Supports team and team goals by actively participating in all sales meetings and training programs as assigned., • Achieves monthly sales quotas in high-speed data, mobile, landline phone, and video sales., • Completes all administrative tasks related to products sold in accordance with department practice, policies, and procedures., • Well-informed about our competitors' activities in assigned territory; informs manager of any changing competitive pricing programs, marketing directives, or door-to-door sales tactics., • Attends and successfully completes training programs., • Performs other duties as requested by supervisor. REQUIRED QUALIFICATIONS Required Skills/Abilities and Knowledge • Ability to read, write, speak and understand the English language., • Engaging interpersonal skills., • Ability to listen, formulate needs-based sales strategies, and articulate pitches to sell products and services., • A passion to succeed and a strong personal drive to sell to prospective customers., • Ability to travel (including during inclement weather) to and from assigned territories and company facilities using a reliable personal vehicle., • Familiarity with computer operating systems and software applications as well as consumer and commercial communication devices (e.g., PDAs, smartphones, routers, modems, set-top converters, and wireless devices)., • Must be able to work evenings and weekends, as business needs dictate to maximize prospective customer contact., • A valid driver’s license, car insurance, a satisfactory driving record, and the use of a reliable personal vehicle., • Ability to work independently with little or no supervision. Required Education High School Diploma or equivalent work experience. PREFERRED QUALIFICATIONS Preferred Skills/Abilities and Knowledge • Success in a previous sales position, prospecting, or cold calling; direct sales experience is preferred but not required., • Knowledge of cable or telecommunications services, with an emphasis on data networking fundamentals and the ability to educate consumers on related products and services as needed. Preferred Related Work Experience and Number of Years 2+ years sales or relevant work experience WORKING CONDITIONS • Spends approximately 90% of the time in an outside environment for extended periods in any season, with potential exposure to inclement weather., • Minimal time in an office environment., • Exposure to moderate noise levels. #ZRSM2 SDT212 2025-63205 2025 Here, our employees don’t just have jobs, they're building careers. That’s why we offer a comprehensive pay and benefits package that rewards employees for their contributions to our success, supporting all aspects of their well-being at every stage of life. A qualified applicant’s criminal history, if any, will be considered in a manner consistent with applicable laws, including local ordinances. Get to Know Us Charter Communications is known by our Spectrum products and services, including: Spectrum Internet®, TV, Mobile and Voice, Spectrum Networks, Spectrum Business and Spectrum Reach. When you join our team, you’ll be keeping our customers connected to what matters most in 41 states across the U.S. Watch this video to learn more. Grow Your Career Here We’re committed to growing a workforce that reflects the customers and communities we serve – providing opportunities for employment and advancement to all team members. Spectrum is an Equal Opportunity Employer, including job seekers with disabilities and veterans. Learn about Life at Spectrum. REQUIRED QUALIFICATIONS Required Skills/Abilities and Knowledge • Ability to read, write, speak and understand the English language., • Engaging interpersonal skills., • Ability to listen, formulate needs-based sales strategies, and articulate pitches to sell products and services., • A passion to succeed and a strong personal drive to sell to prospective customers., • Ability to travel (including during inclement weather) to and from assigned territories and company facilities using a reliable personal vehicle., • Familiarity with computer operating systems and software applications as well as consumer and commercial communication devices (e.g., PDAs, smartphones, routers, modems, set-top converters, and wireless devices)., • Must be able to work evenings and weekends, as business needs dictate to maximize prospective customer contact., • A valid driver’s license, car insurance, a satisfactory driving record, and the use of a reliable personal vehicle., • Ability to work independently with little or no supervision. Required Education High School Diploma or equivalent work experience. PREFERRED QUALIFICATIONS Preferred Skills/Abilities and Knowledge • Success in a previous sales position, prospecting, or cold calling; direct sales experience is preferred but not required., • Knowledge of cable or telecommunications services, with an emphasis on data networking fundamentals and the ability to educate consumers on related products and services as needed. Preferred Related Work Experience and Number of Years 2+ years sales or relevant work experience WORKING CONDITIONS • Spends approximately 90% of the time in an outside environment for extended periods in any season, with potential exposure to inclement weather., • Minimal time in an office environment., • Exposure to moderate noise levels. #ZRSM2 Company DescriptionCharter Communications is known in the United States by our Spectrum brands, including: Spectrum Internet®, TV, Mobile and Voice, Spectrum Networks, Spectrum Business and Spectrum Reach. When you join us, you’re joining a strong community of 95,000 employees working together to serve nearly 32 million customers in 41 states and keep them connected to what matters most. We’re committed to growing a workforce that reflects our communities, and providing equal opportunities for employment and advancement. EOE, including disability/vets.Charter Communications is known in the United States by our Spectrum brands, including: Spectrum Internet®, TV, Mobile and Voice, Spectrum Networks, Spectrum Business and Spectrum Reach. When you join us, you’re joining a strong community of 95,000 employees working together to serve nearly 32 million customers in 41 states and keep them connected to what matters most.\r\n\r\nWe’re committed to growing a workforce that reflects our communities, and providing equal opportunities for employment and advancement. EOE, including disability/vets.

Job Description Azurity Pharmaceuticals is a privately held, specialty pharmaceutical company that focuses on innovative products that meet the needs of underserved patients. As an industry leader in providing unique, accessible, and high-quality medications, Azurity leverages its integrated capabilities and vast partner network to continually expand its broad commercial product portfolio and robust late-stage pipeline. The company's patient-centric products span the cardiovascular, neurology, endocrinology, gastro-intestinal, institutional, and orphan markets, and have benefited millions of patients. For more information, visit . Azurity Pharmaceuticals is proud to be an inclusive workplace and an Equal Opportunity Employer. Azurity's success is attributable to our incredibly talented, dedicated team that focuses on benefiting the lives of patients by bringing the best science and commitment to quality into everything that we do. We seek highly motivated individuals with the dedication, integrity, and creative spirit needed to thrive in our organization. Brief team/department description: The BD&L Manager will be responsible for supporting Corporate Development's strategic initiative in accelerating the company's growth through North America territories to achieve True North Goals. This position will focus on managing internal processes, coordinating due diligence efforts between Azurity stakeholders and external partners, and search for leads. Key functions include partner identification, opportunity evaluation, diligence, financial modeling, and closing activities. Principle Responsibilities: • Source new licensing opportunities that align with Azurity's portfolio fit by expanding existing alliances, attending scientific and partnering conferences, and networking with other specialty pharma, biotech, and venture capitalists., • Develop network of commercialization companies appropriate for divesting Azurity products as part of individual sunset strategies., • Process RFPs and develop quantitative and qualitative assessment from proposals received., • Make financially supported recommendations for BD&L activity., • Mine publicly available information and market intelligence to maintain an informed view of competitive opportunities for Azurity., • Liaise with other departments, business units, and partners in a professional, efficient, and cour-teous manner., • Bachelor's degree in business, life sciences, or technical field, advanced degree preferred., • 3+ years of pharmaceutical industry experience in business development, licensing, banking, portfolio, marketing, sales, technical (project management, manufacturing, R&D), pharmacy, or IP., • Good understanding of the regulatory process, commercial environment within the pharmaceu-tical and biotech industry across ex-US territories., • Highly skilled in Excel and PowerPoint applications. · Fluent with product analytics tools (e.g. IQVIA, Global Data)., • Strong written, verbal, and presentation skills. #LI_Hybrid Physical & Mental Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to sit for long periods of time, • While performing the duties of this job, the employee is frequently required to stand; walk; sit; talk and/or hear, • May occasionally climb stairs and/or ride elevators, • The employee must occasionally lift and/or move up to 25 pounds, • Employee must be able to manipulate keyboard, operate a telephone and hand-held devices, • Unlock Your Earning Potential: Join our team and be rewarded with a competitive compensation package, including an annual bonus based on company performance, that recognizes your exceptional talent., • Sales - In lieu of annual bonuses, we offer an Incentive compensation program that allows you to earn more - even over plan., • Comprehensive Health Coverage: We value your well-being and offer excellent medical, dental, vision, and prescription coverage to ensure you and your family are always taken care of., • Invest in Your Future: Our Retirement Savings Plan (401K) is designed to help you secure a comfortable retirement by matching dollar for dollar up to 5%., • Time Off That Counts: Take advantage of our generous time off policy, which offers up to 15 vacation days annually + rollover (up to 40 hours) as well as five sick/wellness days. For new employees, vacation accrual will be prorated based on your start date., • Meaningful Time with Your Loved Ones: We close between Christmas and New Year's to give you an extra week off to spend quality time with your family and recharge., • Enjoy the Holidays: Over the course of the year, Azurity recognizes 13 holidays., • Invest in Your Education: We support your professional growth with tuition reimbursement for undergraduate and graduate level courses or certifications., • Recognize and Be Recognized: Our Azurity High Five peer recognition platform allows you to celebrate your colleagues' accomplishments and receive recognition for your own outstanding work. The California Consumer Privacy Act regulates privacy rights and consumer protection for residents of California, United States. For details, click here. The General Data Protection Regulation (GDPR) sets guidelines for the collection and processing of personal information from individuals who live in the European Union (EU).

Job Description Job Title: Project Manager – Commercial Construction Location: Raleigh, NC Company Type: Mid-Sized Commercial General Contractor Employment Type: Full-Time Build Your Future With Us Are you a proactive and detail-oriented construction professional looking to take ownership of exciting commercial projects? Our growing mid-sized general contracting firm in Raleigh, NC is looking for an experienced Project Manager to join our dynamic team and help lead the successful execution of commercial construction projects throughout the Triangle and surrounding areas. About Us We are a well-respected and fast-growing commercial general contractor specializing in ground-up, renovation, and tenant improvement projects across various sectors, including office, retail, healthcare, light industrial, and education. Our firm is built on a reputation of quality, integrity, and long-term relationships—with both clients and team members. We take pride in our collaborative culture, and we’re committed to developing our people and promoting from within. What You’ll Do As a Project Manager, you will be responsible for the overall planning, coordination, and execution of assigned construction projects from pre-construction through closeout. Key Responsibilities: • Manage all phases of the construction project lifecycle, • Develop and maintain project schedules, budgets, and cost controls, • Coordinate with owners, architects, engineers, and subcontractors to ensure seamless project execution, • Prepare and manage contracts, change orders, RFIs, submittals, and project documentation, • Lead project meetings and provide regular progress updates to stakeholders, • Ensure project compliance with safety standards, quality expectations, and contract requirements, • Collaborate closely with field superintendents to ensure alignment on schedule and construction activities What We’re Looking For • 5+ years of experience as a Project Manager in commercial construction, • Experience managing projects in the $2M–$50M+ range, • Strong knowledge of construction methods, building codes, and scheduling software, • Proficiency with project management tools such as Procore, Bluebeam, Microsoft Project, or similar, • Excellent communication, leadership, and problem-solving skills, • Bachelor’s degree in Construction Management, Engineering, or related field preferred (or equivalent experience) What We Offer • Competitive base salary (commensurate with experience), • Performance-based bonuses, • Company vehicle or allowance + gas card, • Full benefits package: medical, dental, vision, 401(k) with company match, • Paid time off, holidays, and paid parental leave, • Continuing education and professional development support, • Opportunities for advancement with a clear path to senior leadership roles, • A team-focused, supportive culture with strong leadership If interested you can apply to this position or email your resume to To view additional roles we are recruiting for, please visit:

Job Description CorVel Corporation is hiring a caring, self-motivated, energetic and independent registered nurse to fill a Medical Case Manager position in the Raleigh, NC area. Work from home, and on the road. Monday – Friday, regular business hours. As a Medical Case Manager you will make a meaningful difference in the lives of injured workers and their families. Your responsibilities include working closely with injured workers to facilitate their recovery. You will work collaboratively with the patient, their family, medical providers, members of our team, and others. This is a heavy local travel role responsible for working with a caseload of workers compensation injured workers within a defined jurisdiction. ESSENTIAL FUNCTIONS & RESPONSIBILITIES: • Provides in-person and telephonic Medical Case Management to individuals, involving the patient, physician, other health care providers, the employer, and the referral source, • Utilizes their medical and nursing knowledge to discuss the current treatment plan with the physician and discuss alternate treatment plans, • Provides assessment, planning, implementation, and evaluation of patient’s progress, • Evaluates patient’s treatment plan for appropriateness, medical necessity, and cost effectiveness, • Attends doctors, other providers, home and in some cases, attorney’s visits, • Attends hospital and/or long-term facility discharge planning conferences, etc. for the purpose of determining appropriateness of care and developing an effective long-term care strategy, • Conducts home visit for initial evaluation, • Implements care such as negotiating the delivery of durable medical equipment and nursing services, • This role requires regular travel, dependent on the injured worker’s injuries and needs. The employee must be available for local travel up to approximately 60% of the work week/month, • This role may require overnight travel, • Additional duties as required KNOWLEDGE & SKILLS: • Effective communication and multi-tasking skills in a high-volume, fast-paced, team-oriented environment, • Ability to meet with the patient, their physicians, other healthcare providers, attorneys, advisors/clients, and coworkers, • A cost containment background, such as utilization review or managed care is helpful, • Strong interpersonal, time management, and organizational skills, • Computer proficiency and technical aptitude with the ability to utilize Microsoft Office, including Excel spreadsheets, • Ability to work both independently and within a team environment EDUCATION & EXPERIENCE: • Experience as an RN Medical Case Manager is ideal, or a clinical background in orthopedics, neurology, or rehabilitation is preferred, • Graduate of accredited school of nursing, • Current RN Licensure in state of operation, • Certification as a CCM, CIRS, or other Case Management certifications preferred, • A valid driver’s license, reliable transportation, and ability to travel to assigned locations is required PAY RANGE: CorVel uses a market based approach to pay and our salary ranges may vary depending on your location. Pay rates are established taking into account the following factors: federal, state, and local minimum wage requirements, the geographic location differential, job-related skills, experience, qualifications, internal employee equity, and market conditions. Our ranges may be modified at any time. For leveled roles (I, II, III, Senior, Lead, etc.) new hires may be slotted into a different level, either up or down, based on assessment during interview process taking into consideration experience, qualifications, and overall fit for the role. The level may impact the salary range and these adjustments would be clarified during the offer process. Pay Range: $65,436 - $98,982 A list of our benefit offerings can be found on our CorVel website: CorVel Careers | Opportunities in Risk Management In general, our opportunities will be posted for up to 1 year from date of posting, or until we have selected candidate(s) to fulfill the opening, whichever comes first. ABOUT CORVEL – Medical Case Managers: CorVel, a certified Great Place to Work® Company, is a national provider of industry-leading risk management solutions for the workers’ compensation, auto, health and disability management industries. CorVel was founded in 1987 and has been publicly traded on the NASDAQ stock exchange since 1991. Our continual investment in human capital and technology enable us to deliver the most innovative and integrated solutions to our clients. We are a stable and growing company with a strong, supportive culture and plenty of career advancement opportunities. Over 4,000 people working across the United States embrace our core values of Accountability, Commitment, Excellence, Integrity and Teamwork (ACE-IT!). A comprehensive benefits package is available for full-time regular employees and includes Medical (HDHP) w/Pharmacy, Dental, Vision, Long Term Disability, Health Savings Account, Flexible Spending Account Options, Life Insurance, Accident Insurance, Critical Illness Insurance, Pre-paid Legal Insurance, Parking and Transit FSA accounts, 401K, ROTH 401K, and paid time off. In addition, Medical Case Managers are eligible for bonus and will be provided state-of-the-art technological devices to ensure ready access to CorVel’s proprietary Case Management application, enabling staff to retrieve documents on the go and log activities as they occur. CorVel is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. #LI-Remote

Job Description NDT/NDE Certified Welding Inspector Requisition Number: 2025-1050-19 Are you a Certified Welding Inspector seeking a challenging opportunity to grow your career with a firm committed to our employees and providing high-quality service to our clients? S&ME is looking for an eager and dedicated full-time NDT/NDE Certified Welding Inspector to join our NDT/NDE team in Raleigh, North Carolina. At S&ME, we have a history of delivering innovative geotechnical, civil, environmental, and construction material testing for over 50 years. Over the decades, we have grown into a trusted partner for clients across various industries, including transportation, energy, water, waste management, education, government, commercial, industrial, and more. Our commitment to technical excellence and integrity has established us as a leader in our field. Why Work at S&ME? • Professional Growth: We believe in providing continuous learning opportunities, mentorship programs, and a supportive work environment. Let us tell you more about that!, • Innovative Projects: Join a team that works on diverse and challenging projects of all sizes and complexities, including but not limited to airports, solar farms, power plants, schools, trails, mixed-use, sports stadiums, dams, museums, and more., • Inclusive Culture: Our culture is built on collaboration and mutual respect. We want you to want to come into the office to build relationships, laugh together, learn from each other, and enjoy the time with your teammates and colleagues., • Work-Life Balance: We strive to offer a flexible working environment, allowing you and your manager to determine how you can work most effectively and collaboratively to meet your client, team, and personal commitments., • Community Impact: Our work creates lasting, positive impacts on the communities we serve. We pride ourselves on our technical excellence, quality work, and client satisfaction to continue making a difference. About The Role: As a Certified Welding Inspector (CWI) specializing in NDT/NDE, you will guide metals technicians on intricate projects that demand advanced testing expertise. You will oversee other technicians on assignments, make some technical decisions related to project timelines, and carry out laboratory and metals testing tasks with minimal oversight. Your role will involve fieldwork, which may include safely ascending steel structures like buildings, cell towers, and water tanks to heights over 200 feet, using fall protection gear and personal fall arrest systems. • Field Operations: You perform inspections and utilize non-destructive testing techniques to maintain high-quality standards. A large portion of your field inspection time is dedicated to non-destructive testing (NDT) activities such as ultrasonic testing (UT) of welds and/or magnetic particle testing (MT) of welds., • Assignment Management: You coordinate testing assignments across various projects, ensuring the success of each one., • Equipment Maintenance: Keep testing equipment operational and calibrated; this may involve managing field and lab equipment inventories, maintaining formal calibration records, and participating in quality system audits. About You: • You have a High School Diploma/GED, • You have a minimum of 2 years of NDT/NDE metals testing experience OR an associate degree in a closely related field, • You are an AWS Certified Welding Inspector (CWI), • You have achieved ASNT Level II certification per ASNT-SNT-TC-1A in at least one method, • You have additional certifications, a plus:, • ICC certification in Building Inspections and/or Structural Steel Inspection, • Level II for UT, PT, MT certification You Are Willing and Able to: Perform the physical demands of the position with the use of company-provided Personal Protective Equipment, such as: • Outdoor, hands-on work in all weather conditions, • Climbing heights over 200 feet, • Lifting and carrying 40-50 lbs. of materials and equipment, • Safely handling field tools and maneuvering equipment on active construction sites, • Traveling out-of-town (typically overnight) for assignments as necessary, • Working outside of normal business hours when necessary Grow With Us: At S&ME, your career growth matters. You'll receive professional training, work on exciting projects, and be part of a company that truly invests in its people. This is more than a job; it's a chance to build a long-term career in the engineering and construction industry. S&ME provides a comprehensive benefits package to support you and your family, as well as career development resources. Come grow and thrive with us at S&ME! • Medical, Dental & Vision Plans with HSA and FSA options, • 100% Employee Stock Ownership Plan (ESOP), • 401K with Company Matching, • PTO with Rollover, • Maternity/Paternity Leave, • Employee Recognition Program, • Credential Incentive Program, • Tuition Reimbursement, • Company Vehicle with Fuel Card for Project-Based Work, • $2,000 Referral Bonuses & More! Join us at S&ME! This full-time role offers competitive pay based on experience. Candidates must comply with our Fleet Management, Substance Policy, and Reference Check requirements. Only candidates with valid employment eligibility (I-9) will be considered. Visa assistance is not available. S&ME reserves the right to hire internally or externally at any time. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job DescriptionSummary Delta Oaks Group is seeking an individual to perform various structural engineering analysis and design services, as part of our Structural Engineering Department located in Raleigh, NC. The selected individual will perform various structural engineering design/analysis tasks as well as serve as the primary liaison to our infrastructure inspections department regarding cross-discipline structural reporting. Positional Responsibilities This position is responsible for performing design, computations, and evaluations generally associated with tower structures and other aspects of the structural engineering discipline focused in the wireless telecommunications industry. The position will mesh field exposure to real-world construction and field- related issues with 2-D and 3-D structural design practices of tower infrastructure. Anticipated tasks include but are not limited to: • Structural analysis and design utilizing manual calculations, commercially available software, and in-house tools., • Programming in-house tools for analysis / design, calculation and report automation., • Providing CAD support for the preparation of structural design drawings or inspection related services., • Coordination with field personnel for structural mapping and inspection projects., • Preparation of engineering reports related to the inspection, condition, structural design, structural analysis, or structural modification of tower infrastructure, • Review of jurisdictional and/or local governing agency requirements for structural analyses, design and construction., • Review and QA/QC of technical reports completed by other engineering and technical staff., • Communication with clients on design needs and production deadlines, under the direction of a Manager or an associated project lead., • Provide training and guidance to CAD and other structural engineering staff/personnelThe selected individual will be expected to have a thorough understanding of telecommunications structural and mapping services, procedures and techniques, preferably through demonstrated structural mapping and inspection field experience. Computer Software Experience • Proficiency with commercial tower analysis software, e.g. tnxTower, • Familiarity with finite-element software, e.g. RISA 3D, with specific application to antenna mounts and other custom structures, is preferred, • Knowledge and use of foundation analysis / design software, including Caisson and LPILE, • Competent use of visual calculation software, e.g. MathCAD, • Experience with computer drafting software, AutoCAD 2012 or later, is required., • Proficiency in Microsoft Office software, particularly Microsoft Excel and Word is required., • Advanced knowledge of tower and foundation reinforcement methods, • Demonstrated experience in wireless telecommunication structure analysis and design, • Understanding of structure mapping and inspection techniques through previous mapping/inspection experience is strongly preferred

Job Description JOB TITLE: Sr. Controls Service Technician STATUS: Full Time, Non-Exempt (Eligible for overtime) DEPARTMENT: Service REPORTS TO: Service Manager or Operations Supervisor JOB SUMMARY: The Sr. Controls Service Technician perform preventive maintenance, troubleshooting, and repair of building automation systems and their components. As a Sr. Controls Service Technician you will provide analysis of building control and HVAC system performance in buildings; provide accurate and complete documentation in a timely manner; perform DDC controls startup/programming as required and cct as liaison to customer, and electrical installer. Employment at Will: Nothing herein is intended to create a contract of employment or to guarantee employment for a definite duration. SR. CONTROLS SERVICE TECHNICIAN DUTIES AND RESPONSIBILITIES: • Preventative Maintenance Tasking (Database Back-ups, Control System Analysis, Network Analysis and Optimization, Central Equipment Controls Performance Testing, Customer Training), • Execute Service Quoted Projects, • Troubleshoot DDC Control and Mechanical Systems when necessary, • Replace Failed Components as necessary, • Provide Consistent Communications (Supervisor, Service Coordinator, Account Managers, and Customer), • On call as scheduled SKILLS AND ABILITIES: • Knowledge of HVAC DDC Control Theory & Applications, • Proficient with Alerton, Distech, Delta, Niagara, or Tridium programming, • Experience with electronics and basic electrical circuits, • Strong troubleshooting skills, • Computer hardware and software skills, • Ability to work independently and unsupervised, • Strong communications and interactive skills CREDENTIALS AND EXPERIENCE: • AA degree in applied technology (preferred), • Equivalent combination of education and experience, • HVAC and/or Mechanical systems experience, • Computer programming experience, • Troubleshooting experience, • 5+ years of BACnet controls experience. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Building Technologies, Inc. No phone calls or drop-ins please. EEO Employer/Vets/Disabled

Job Description We are looking for a talented Special Education Teacher for the school year. Hourly Rate Range: Rate Range: $38.00-$44.00 per hour Responsibilities would include: • Develop and implement Individualized Education Programs (IEPs) to support students with disabilities., • Provide differentiated instruction in one-on-one, small group, and inclusive classroom settings., • Adapt lesson plans, curriculum, and instructional strategies to accommodate diverse learning needs., • Assess and monitor student progress using data-driven decision-making., • Collaborate with general education teachers, therapists, and support staff to ensure student success., • Participate in IEP meetings, student evaluations, and parent-teacher conferences., • Maintain accurate records and documentation in compliance with North Carolina Department of Public Instruction (NCDPI) and IDEA regulations., • Bachelor's or Master's Degree in Special Education from an accredited program., • North Carolina Professional Educator's License in Special Education (issued by the North Carolina Department of Public Instruction – NCDPI)., • Special Education Licensure in categories such as Adaptive Curriculum (AC) or General Curriculum (GC) preferred., • Experience with IEP development and implementation., • Competitive Pay: We negotiate on your behalf to ensure you get a pay package that fits your needs., • Work-Life Balance: Enjoy contracts up to 40 hours per week, unlike salaried positions, you would be paid time 1.5 for anything approved over 40 hours by your supervisor., • Dedicated Support: Our dedicated Relationship Manager is there with you every step of the way to ensure you have what you need, • Flexibility Post-Contract: Options to extend your contract, convert to a permanent position, or explore new opportunities., • Personal Time Off: Accrue paid time off for every hour worked, • Paid Holidays: 6 Paid holidays: Labor Day, Thanksgiving, Christmas, New Years, Presidents Day and Memorial Day., • Material Reimbursement: Reimbursement of $250.00 for any supplies purchased for your classroom, • Medical, dental, and vision are offered At Schoolforce Solutions, we prioritize your success and satisfaction. We ensure that you have the resources, flexibility, and support you need to thrive in your role and beyond. Equal Opportunity Employer Schoolforce Solutions is proud to be an Equal Employment Opportunity (EEO) Employer, welcoming candidates from all backgrounds, including individuals with disabilities and veterans. Interested in joining our team and making a difference? Apply today and take the next step in your career! By applying with our company, you agree to receive personalized text messages about job opportunities from Schoolforce Solutions on the cell number listed on your resume when signing up. Consent is not a condition of any job opportunity. Reply STOP to cancel. Messages frequency varies, Messages and data rates may apply.

Job DescriptionBenefits: • Liability Insurance Discounts, • Childcare discounts, • Competitive salary, • Employee discounts, • Flexible schedule, • Free uniforms, • Opportunity for advancement, • Training & development What We Offer: • A Supportive, Massage Therapist-Centered Team environment, • Focus on your professional development. - 12 CEU's with New Hire Training!, • Peaceful, beautifully appointed facilities and fully equipped rooms with all necessary supplies, • Steady Clientele driven by extensive, ongoing marketing efforts, • Continuing Education opportunities including Medical Oncology Certification training and Prenatal Massage as well as reimbursement for other courses., • Growth Opportunities: Lead, Manager, Corporate Trainers, • Paid time off programs, • Generous Employee Rewards & Bonus Programs including Sign-On and Referral bonuses, • Complimentary services and discounts on retail products, • Discounts on liability insurance, Verizon Wireless, Lifetime Fitness, • Internships + Training available for new graduates, • Current NC LMT License, • Professional/Caring demeanor, • Ability to develop treatment plans based on individual clients and their unique needs, • Ability to guide clients towards massage therapy for health & wellness LMT193

Job Description Program Manager/Rehab Director- Raleigh, NC Skilled SettinngTrinity Rehab Trinity Rehab is committed to changing lives through Christ-Centered therapy solutions that are designed to assist our clients regain their self-sufficiency. Owned and operated by therapists, Trinity Rehab understands the commitment it requires to help our patients achieve the highest level of independence. Our dedicated team of therapists strives to unlock the full potential of our patients, improve their quality of life and restore both their function and hope for the future. Requirements Program Managers for Trinity Rehab, LLC will maintain control over daily operating decisions including, but not limited to the financial operations, billing integrity, corporate compliance, standards of practice, and standards of care for any facilities in defined area. Program Manager’s report to the VP of Operations. • Responsible for direct supervision of all clinical staff in designated facility/facilities including, but not limited to disciplinary management, • Maintain fiscal integrity of operations by managing revenue, cost and productivity, • Responsible for providing clinical services as needed (sign appropriate clinical job description as well), • Supervise clinical development and programming for designated employees of Trinity Rehab, • Maintain corporate compliance in billing practices by ensuring that designated Trinity Rehab billing information contains information verified as correct, • Assist in the recruitment, orientation, and training of clinical staff to ensure that all designated Trinity Rehab employees express understanding of the standards of documentation, service delivery, and billing required by Trinity Rehab, • Maintain customer relationships by working with any individual associated with a Trinity Rehab account in such a way that reflects the corporate philosophies of Trinity Rehab Benefits • Competitive Compensation, • Comprehensive medical, dental & vision plans, • Paid Time Off (PTO), • Retirement Plan (401K) – Company Match, • Life Insurance, • Company paid group life insurance, • Short & Long term disability, • Critical Illness, • Flexible Spending, • Licensure Reimbursement, • Bereavement Leave, • Accidental death and dismemberment, • Clinical support and training, • Continuing Education, • Tuition Assistance, • Christmas Club

Job DescriptionCompany Description CRB is a leading provider of sustainable engineering, architecture, construction and consulting solutions to the global life sciences and food and beverage industries. Our more than 1,100 employees provide best-in-class solutions that drive success and positive change for our clients, our people and our communities. CRB is a privately held company with a rich history of serving clients throughout the world, consistently striving for the highest standard of technical knowledge, creativity and execution. Job Description CRB is seeking a highly motivated and self-driven CQV Engineer III to support the delivery and execution of Commissioning, Qualification, and Validation (CQV) services across Life Sciences projects. The ideal candidate will provide technical leadership and field execution support for equipment and utility systems from design through facility turnover. This role involves guiding internal and external CQV resources, coordinating with multi-disciplinary project teams, and ensuring compliance with client and global regulatory requirements. The CQV Engineer II will develop and implement commissioning strategies, lead verification activities, and manage deliverables in alignment with project timelines and quality standards. The position requires excellent organization, communication, and leadership skills, as well as the ability to work collaboratively across engineering, QA, and construction teams in a dynamic project environment. Responsibilities • Define and document client requirements and develop project-specific CQV plans, • Review and approve commissioning and qualification strategies for equipment and utilities, • Provide input on operability, maintainability, and reliability considerations during design, • Lead or support execution of commissioning, qualification, and validation activities, • Witness and verify FAT/SAT, test protocols, and qualification execution, • Provide independent verification and quality oversight of CQV deliverables, • Act as the primary interface between CQV, engineering, and construction teams, • Develop and manage CQV schedules, ensuring alignment with project milestones, • Support risk assessments and ensure compliance with regulatory expectations, • Mentor and train junior engineers and project team members on CQV best practices, • Track, report, and communicate CQV progress and issues to project and regional leadership, • Preferred: North Carolina (Raleigh–Durham area or nearby) or Texas, • Open to travel (approximately 50% or more, depending on project assignment and client needs), • Work Environment: Combination of office, client site, and vendor locations, • Reports To: Sr CQV Project Manager/Director or Regional CQV LeadQualifications, • Education:, • Master’s Degree in Engineering, Life Sciences, or related field with minimum 5 years of CQV experience, OR, • Bachelor’s Degree in Engineering, Architecture, or Construction Management with minimum 5+ years of CQV experience in the Life Sciences industry, • Technical Experience:, • Proven experience with commissioning and qualifications of life sciences equipment and utility systems (e.g., process equipment, clean utilities, HVAC, WFI, CIP/SIP, nitrogen, compressed air, etc.), • Working knowledge of cGMP, FDA, EU, and ISPE guidelines, including ISPE Baseline Guide 5 and Risk-Based Approach to Commissioning and Qualification, • Familiarity with URS, FAT, SAT, IQ, OQ, PQ documentation and execution, • Proficiency in risk assessment methodologies, root cause analysis, and continuous improvement tools, • Skills & Attributes:, • Strong interpersonal, communication, and presentation skills, • Demonstrated leadership in coordinating cross-functional CQV efforts, • Excellent technical writing and document review capability, • Flexible and willing to travel as needed (50% or more) Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Job Description Senior MES Engineer Raleigh, NC If you post this job on a job board, please do not use company name or salary. Experience level: Mid-senior Experience required: 10 Years Education level: Bachelors degree Job function: Engineering Industry: Industrial Automation Compensation: View salary Total position: 1 Relocation assistance: No Visa sponsorship eligibility: No JOB DESCRIPTION: This position requires demonstrated technical proficiency in software design and configuration of MES solutions with integration capabilities to level two and four systems. The Senior MES Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, evaluating MES platforms, developing specifications, and implementing/testing/commissioning/qualifying MES solutions. This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships. The Senior MES Engineer demonstrates success by securing repeat work with both new and existing customers. RESPONSIBILITIES: This position requires the ability to deliver innovative MES solutions and design standards either self-directedly or as a leader of a team. The candidate will act as a solution architect and must have the ability to conceptualize, detail, and implement MES Solutions for industrial processes and machinery that meet our customers requirements. This involves the development of an MES strategy that integrates process knowledge, equipment design, and quality standards with information technology to reduce downtime, elevate the level of regulatory compliance, and introduce efficiency gains through the effective use of available technologies. This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures, and associated budgets, task prioritization and scheduling, task ordering, time tracking, and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project. The ideal candidate must have a diverse engineering skillset with the ability to work independently. Will act as technical lead on projects and guide lower-level engineers and technicians. Could also act as Project Manager on smaller projects. QUALIFICATIONS: Education: A Bachelor of Science degree in Engineering, Computer Science or the Applied Sciences required. Experience Greater than 10 years with capabilities in the below areas is preferred: MES solution deployment experience with but not limited to Werum PAS-X, Sepasoft, or POMS Proven experience with all phases of MES projects including conceptual, basis of design, implementation, testing, start-up, and commissioning in the Life Science industry Familiarity with relevant regulatory requirements of the life science industry such as cGMP, 21 CFR Part 11, etc. Demonstrated proficiency with designing and implementing integrated EBR recipes using GAMP5, S88, and S95 standards Understand the manufacturing processes and system configuration and make informed recommendations regarding optimal system configuration Understanding of warehouse and inventory management specifically in a GMP facility Support software and configuration required for external systems interfaces such as DeltaV, SAP, LIMS, PI, and Maximo Strong knowledge of historian technology and reporting systems Experience with relational databases such as SQL, Oracle, etc. Strong knowledge of IT/OT networking Excellent technical writing and verbal communication skills Working knowledge of MS Office products Experience leading a team of engineers/technicians to provide MES solutions Experience mentoring less experienced engineers Professional references, preferably one from each of the following: a subordinate, a peer, and a manager Ability to travel up to 25% PHYSICAL DEMANDS OF POSITION: Seeing, color perception, hearing, clear speech, dexterity in hands, driving, lifting, ability to mount/dismount equipment, pushing and pulling. WORKING ENVIRONMENT: Standard office environment, on-site office environment, diverse industrial environments, frequent use of a personal computer, facsimile/copy machines, and phones. About Wunderlich-Malec: As a 100% Employee-Owned Company our people are passionate about solving your unique engineering challenges, and with the support of industry experts behind them, they can successfully execute projects of any size while meeting your requirements of scope, schedule, and budget. Wunderlich-Malec has been providing customers with engineering, system integration and fabrication solutions for more than 40 years. With offices throughout the US and over 500 professionals on our staff, we are one of the largest and most well-established engineering companies in the United States, and we've successfully finished numerous projects for our US clients in many parts of the world. We're confident that our qualified staff has the knowledge, experience, and talent to create and deliver the solutions you need for your facility process and operation needs. Wunderlich-Malec ranks on Inc. 5000's Fastest-Growing Private Companies list and is a GSA Schedule holder with the Federal Government for professional engineering services and manufacturing.

Job DescriptionBenefits: • Continued Education, • 401(k) matching, • Bonus based on performance, • Paid time off, • Vision insurance, • Company parties, • Dental insurance Responsibilities: Develop detailed cost estimates by analyzing drawings and specifications. Perform quantity take-offs and prepare comprehensive cost estimates. Collaborate with suppliers and subcontractors to ensure accurate pricing. Engage with clients to clarify scope changes and address questions during the bidding process. Provide vital cost information and estimates for project adjustments throughout different phases. Acts as a resource to project management during the award / start-up phase to clarify any issues regarding what was considered in the estimate including materials and methods of construction. Reviews budget and project profitability status and goals with supervision and project team as required. Seeks input on corrective measures to continuously improve the identification and accuracy of cost figures. Occasionally traveling for prebid and bid drop-offs Conducting searches for perspective bid opportunities Requirements: Bachelors degree in construction management, or related field, coupled with 0-2 years of commercial preconstruction estimating experience. Strong problem-solving abilities with a solution-oriented approach and excellent communication skills. Proficient in Microsoft Office (Outlook, Excel, Word) and experienced with industry-standard estimating software (e.g., Heavy Bid, Sage, OST, Procore, Blue Beam). Demonstrated skills in reading and interpreting bid documents and drawings, with a keen attention to detail. Employment Type: Full Time Salary: $65,000 - $75,000 Per year (Base Salary & Bonus) Benefits: 100% Employer Paid Health, Vision & Dental Insurance for employee. PTO/ Paid Holidays 401K W/ 3% Match Continued Education as needed. We are an equal opportunity and drug-free workplace. Pre-employment drug screening required. Disclaimer: Evaluation Process and Employee Contact At Cooper Tacia General Contracting Company, we value a structured, fair, and confidential hiring and evaluation process. We respectfully request that external parties, including recruiters, vendors, and applicants, do not contact our employees directly regarding job opportunities, interviews, or internal matters. All communications related to employment or recruitment must be directed through our Human Resources department or the designated hiring manager. Unsolicited outreach to our team members may be considered a violation of our communication policy and may result in removal from consideration. We appreciate your professionalism and cooperation in respecting our internal processes and evaluation timelines. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of responsibilities, duties and skills required. Personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job DescriptionCompany Description Together with 6,900 colleagues worldwide, we are the strategic partner for the pharmaceutical, biotech and food industries. With seamless processes, innovative technologies, and sustainable solutions, we help our customers achieve their goals. For example, we ensure that vaccines are safely filled and that tablets can fully release their active ingredients. Your favorite chocolate and snacks are also sustainably packaged with our help. Apply now and become part of our team! The Syntegon Technology Services location in Raleigh, North Carolina is the headquarters of the North American Service Hub of Syntegon, which concentrates on the customer's unique requirements. Job Description Position Summary The Aftermarket Sales Manager is responsible for leading the sales process from lead generation to order fulfillment for Syntegon packaging equipment. The role also involves improving customer satisfaction by working with Syntegon resources to address customer needs and technical specifications. This position requires a team-oriented individual who can build strong relationships with customers and internal teams. Key Responsibilities • Drive lead generation and manage the sales pipeline through to order intake., • Represent the full portfolio of aftermarket products including Field Service, Parts, Modernization, and Training., • Build and maintain positive relationships with customers, developing a deep understanding of their organization to identify key decision-makers and understand the business strategy and goals., • Develop and execute a regional sales strategy in collaboration with stakeholders., • Use CRM tools consistently to document meetings and project details., • Monitor market trends and competition to provide feedback and strategic insights., • Collaborate with new equipment sales teams to foster ongoing business with existing customers., • Provide support throughout the project cycle, ensuring customer satisfaction and smooth project delivery.Qualifications Basic Requirements • Bachelors or associate’s degree in engineering, science or a business related field. In lieu of degree, a combination of experience and education may be accepted., • Additional related experience in sales, project management, or technical roles for Capital Equipment may replace the degree requirements., • 2+ years of sales experience including territory management and customer relations within the capital equipment industry OR 2+ years of customer and technical skills gained working in a field service, technical helpdesk or project management capacity., • In-depth knowledge or hands-on experience in the assigned sector., • Proven track record in aftermarket sales., • Ability to thrive under pressure, executing mid-to-large capital sales transactions., • Strong patience, persistence, and professionalism to manage long, complex sales cycles., • Proven success in breaking into new markets, establishing new customer relationships, and expanding existing networks through effective networking., • Highly developed skills in planning, self-management, and working independently., • Strong problem-solving skills, • Outstanding communication abilities—both verbal and written with expertise in delivering persuasive presentations., • Strong service orientation, • Excellent collaboration with customers and team members globally. Additional Information The anticipated base salary for this position starts at $90,000 annually. Compensation for roles at Syntegon varies depending on a wide array of non-discriminatory factors including but not limited to the specific office location, role, degree/credentials, relevant skill set, and level of relevant experience. Total rewards at Syntegon include salary + bonus (if applicable) + benefits. We Care About Your Well-Being At Syntegon, the welfare of our employees is a top priority. That’s why we offer a comprehensive and competitive benefits package designed to support your health, financial security, and personal growth from day one, including: • Health Coverage: Medical, Dental, Vision, and Prescription plans starting from your first day., • Retirement Savings: 401(k) plan with a generous company match to help you plan for the future., • Financial Protection: Employer-paid Short- and Long-Term Disability Insurance, plus Life Insurance for your peace of mind., • Career Growth: Education Assistance Program to support your continued learning and development., • Work-Life Balance: Paid Time Off to recharge and enjoy your personal time. Syntegon Technology is a proud supporter of STEM (Science, Technology, Engineering & Mathematics) initiatives: • FIRST Robotics (For Inspiration and Recognition of Science and Technology)

Job DescriptionDescription: POSITION SUMMARY: The Banquet Captain plays a pivotal role in ensuring the successful execution of events by delivering exceptional food and beverage service at The Mayton. This position collaborates closely with the Director of Food & Beverage and the Sales team to coordinate and lead all day to day aspects of banquet operations. Key responsibilities include overseeing event setup, managing service execution, and maintaining high standards of cleanliness, safety, and guest satisfaction. The Banquet Captain is also responsible for training banquet staff, upholding uniform and service standards, and providing on-the-floor supervision during events. This role serves as the primary ‘day of event’ liaison between the hotel and clients, acting as the manager on duty when needed. The ideal candidate will demonstrate strong leadership, excellent customer service skills, meticulous attention to detail, and the ability to thrive in a fast-paced, team-oriented environment. DUTIES AND RESPONSIBILITIES: Food and Beverage Preparation and Service · Manage day to day operations of events · Gather, stock, and, coordinate all equipment necessary to service banquet event · Read and comprehend a Banquet Event Order (BEO), including a room diagram · Prepare room according to the BEO (Banquet Event Order) and the various meal functions · Perform all Banquet side work as designated by Food & Beverage Management · Appropriately welcome, interact with, and take food and drink orders from guests · Check identification of guests to make sure they meet age requirements for purchase of alcohol · Attend to all needs of the guest during functions and function related duties · Serve food and beverage items to guests in a friendly, enthusiastic, professional, and timely manner. · Demonstrate the ability to consistently speak knowledgeably about the menus (both food and drink) · Efficiently and properly perform all service standards to encourage safe and efficient hotel operations · Follow all cash handling procedures when serving the guest · Clean-up banquet space after the completion of the function and ensure that all equipment and supplies are stored and re-stocked properly · Maintain the banquet storeroom in a neat and orderly manner, stocked with any and all appropriate supplies necessary for food service functions Customer Service Skills · Assess customers’ needs and preferences and make appropriate recommendations · Serve customers in a friendly and helpful manner · Provide guidance to guests on hotel activities, dining options and general hotel and regional information. · Stay guest focused and nurture an excellent guest experience · Maintain high level of standards of personal appearance and grooming, which include wearing the proper uniform when working · Respond to guest problems, complaints, and accidents. Communicate to management, if necessary Communication and Teamwork · Communicate and monitor stocking and ordering needs to minimize running out of items · Report to F&B Management, any need for housekeeping and/or repairs of and banquet equipment · Perform other duties as assigned by F&B management · Maintain regular attendance in compliance with hotel standards, as required by scheduling which will vary according to the needs of the hotel and communicate scheduling conflicts, vacations, and shift changes to managers according to policies and procedures · Communicate in a professional manner to all other staff, guests, managers · Work together with other staff in a “One Team, One Dream” mentality Cleanliness, Health, and Safety Standards · Ensure all work surfaces are kept in neat and tidy condition throughout service · Monitor any possible alcohol abuse and appropriately communicate any guests who must be cut off · Maintain a clear and obstruction free service corridor · Comply with all NC Department of Food and Safety regulations · Comply with all NC ABC regulations Requirements: QUALIFICATIONS: • Must be 18 years of age or older to serve alcohol (based on state regulations), • Alcohol certification and Serve Safe a plus!, • Banquet/Restaurant Experience: 1 year (Preferred), • Minimum of 1 year in a supervisory F&B role EDUCATION: High School diploma, general education degree or international equivalent preferred, but not required. LANGUAGE SKILLS: Good knowledge of the English language is mandatory as well as the ability to speak, read and write clearly. Must be able to read and listen to instructions, memos, short correspondences, and messages. PHYSICAL ABILITY: • Ability to be on your feet and alert for extended periods of time, • Ability to lift up to 35 lbs. as needed, • Continuous use of hands and arms, • Continuous bending, reaching, and twisting

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off Cooper Tacia General Contractors is seeking a detail-oriented and motivated VDC Coordinator to join our growing Virtual Design & Construction (VDC) team in Raleigh, NC. In this role, you will support the coordination and implementation of BIM models across construction projects. While primarily based in Raleigh, some travel to job sites will be required to support project needs and ensure effective coordination with field teams. The VDC Coordinator will work closely with project teams, subcontractors, and the VDC Manager to ensure models are accurate, code-compliant, and aligned with project design intent. This is an excellent opportunity for someone looking to grow their career in construction technology and be part of a team shaping the future of digital construction at Cooper Tacia. Responsibilities: Collaborate with the VDC Manager on projects assigned Review contract drawings and specifications for accuracy and completeness Review of coordination, shop, fabrication drawings received from subcontractors Coordinate systems (underground to roof) for constructability, code compliance and design intent Develop an understanding of how each system operates and integrates with others Diagnosing problems and generating solutions to difficult construction-related coordination issues Utilize clash detection software (e.g., Navisworks) during the coordination process Assist VDC Manager in leading, documenting and coordinating meetings Attend Project Meetings and provide updates as needed Maintain and organize coordination files within Procore Generate RFIs from Coordination Meetings Maintain clear project communication with the construction team throughout the coordination process Visit project sites as needed to verify field conditions and support coordination efforts Requirements: Bachelors degree in civil engineering, construction management or similar Strong understanding of BIM/VDC platforms (Revit, Navisworks preferred). Excellent communication and problem-solving skills. Highly organized, detail-oriented, and able to manage multiple priorities. Employment Type: Full Time Salary: 55,000 - 75,000 Benefits: 100% Employer Paid Health, Vision & Dental Insurance for employee. 10 Days PTO/ 10 Paid Holidays 401K W/ 3% Match Continued Education as needed Application Process: All interested individuals must submit a resume and three references. We are an equal opportunity and drug-free workplace. Pre-employment drug screening required. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of responsibilities, duties and skills required. Personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed

Job Description Why this role matters Joining CPL, a nationally recognized Architecture & Engineering (A/E/C) firm, your financial leadership will help shape the foundation of our continued growth and success. As our Senior Manager - Financial Reporting, you’ll oversee the integrity, accuracy, and compliance of our financial statements while partnering with leaders across the firm to provide the insights that drive strategic decisions. This highly visible role offers the opportunity to make a significant impact on the financial health and future direction of our firm. What you’ll do • Lead Financial Reporting: Oversee monthly, quarterly, and annual financial reporting, ensuring accuracy and alignment with GAAP and firm policies., • Strengthen Controls: Develop and maintain internal controls that safeguard reporting integrity and compliance., • Audit Leadership: Serve as the key contact for external auditors, ensuring smooth, timely audits and issue resolution., • Drive Insights: Analyze financial data, identify trends, and provide recommendations to guide executive decision-making., • Collaborate Across the Firm: Partner closely with Operational Finance, FP&A, and other accounting leaders to align financial practices and reporting standards., • Mentor and Lead: Manage, coach, and develop a team of accounting professionals, fostering growth and accountability., • Ensure Compliance: Stay ahead of evolving accounting standards, regulations, and industry best practices. Must Haves: • 7+ years of financial reporting or public accounting experience supporting growing commercial organizations., • Bachelor’s or Master’s degree in Accounting, Finance, or related field., • CPA designation (or active pursuit of certification)., • Strong proficiency with GAAP, technical accounting, internal controls, and financial close processes., • Proven experience acting as a point person and lead on the external auditing process., • ERP experience required (Deltek Vantagepoint a plus)., • Experience in the A/E/C or construction industry. This role offers a unique opportunity to not only influence a leader at the highest level to drive financial success but also a significant runway for career growth. You will join a team of highly respected and collaborative finance professionals and be able to influence, mentor, and build a function. What we offer • Internal Mobility & Career Advancement, • Healthcare for you and your family including spouse coverage: Medical, Dental, Vision & Prescription insurances. Single Plans with 100% paid premium, • Flexible Time Off + 8 Holidays a year, • Retirement Savings Plan - Contribution from CPL to grow your retirement funds., • Tuition Assistance: You may be eligible for continuing education assistance., • Student Loan Assistance Program: CPL will contribute up to a maximum of $100 a month for 5 years ($6,000 total) towards student loan debt., • Licensure Assistance, • Long-Term Disability Insurance Company/team member premium sharing, • Flexible Spending Account $5,000 dependent childcare annually paid 100% by team member pre-taxes., • FREE Life Insurance and AD+D Insurance, • Voluntary Short-Term Disability Insurance What does it look like working here? We believe that building a strong community is about establishing a prevailing sense of fellowship among our team members, friends, and neighbors. • Collaboration – working with others towards the best solution, placing great emphasis on the collective wisdom of our internal teams., • Family – celebrating others’ successes, genuinely caring about the happiness and well-being of our team members and recognizing their own families as extensions of the CPL family., • Fun – not taking oneself too seriously, fully understanding that fun at work is conducive to productivity., • Inspiration – contributing to an uplifting workplace that facilitates growth and success by maintaining a positive, upbeat attitude., • Integrity – doing what is ethically right and providing reliable follow-through on commitments., • Ingenuity – seeking new opportunities and consistently identifying unexpected and practical ways to solve problems. The rate for this position generally ranges between $135,000 and $155,000. This range is a good faith estimate provided pursuant to the New York Pay Transparency Law. It is based on what a successful New York applicant might be paid and assumes that the successful candidate will be in New York or perform the position from New York. Similar positions located outside of New York will not necessarily receive the same compensation. Actual pay rates may vary from the range, as permitted by New York Equal Pay Transparency Law. Compensation offers will be based on various factors, including operational needs, individual education, qualifications and experience, work location and comparison to employees already in the role, as well as other considerations permitted by law. A potential new employee's pay history will not be used in compensation decisions.

Job DescriptionDescription: Do you feel you’ve designed just about everything by now? We do more than “just design”. Our clients frequently come to us only knowing the symptoms of their problems - we get the challenge (and fun) of investigating and figuring out what’s really wrong. We deliver multiple solutions and work with the client to pick the best solution for their case. Then we get to do the actual work of carrying out our ideas and solving their problems for good. Most of our projects are renovations, frequently of only the MEP/FP systems, so it makes for some interesting and challenging projects. The fun of renovation work is dealing with the existing constraints imposed by the structure or building operations. We find ourselves regularly solving problems like how to make the equipment fit into an existing building or figuring out how the contractor will build your design. We are such great problem solvers that 95% of our clients would refer us to others. Clients choose us when they want the job done right the first time. Clients also choose us because they like how involved our management is with the design process. And that’s why our senior engineers are typically our project managers. You’ll manage the project internally, but also be the face of Summer Consultants to the client, fostering that relationship. You’re also encouraged to seek out new clients. We serve our clients' missions as if they were our own, whether supporting the warfighter or our nation's finest government and educational institutions. With our office located in the Mid-Atlantic Region, our interesting client list, and a focus on renovation, you will get to go into some interesting buildings, sometimes seeing history from the inside out. Check out our projects page for some examples of our work. This position will report to the Associate / Branch Office Manager / Senior Mechanical Engineer in charge of the Raleigh Office. Ready to solve problems? Let’s see what we can do together! WHAT SUMMER CONSULTANTS CAN DO FOR YOU? • Provide exposure to many different facility and client types., • Further expand your technical knowledge., • Give you the opportunity to hone your business development skills., • Provide a fun, small, and exciting work environment., • Help solve our client’s problems., • Design mechanical systems for existing and new buildings as technical lead and project manager for local mechanical projects., • Provide project management and coordination of projects to meet client expectations for technical excellence, budget, and schedule. Maintain effective communication with clients, engineers of other disciplines, contractors, and other project team members., • Identify, analyze, and resolve problems in a proactive manner., • Build and foster relationships with potential new clients., • Provide technical expertise to staff and clients., • Bachelor’s degree in Architectural Engineering (HVAC focus), Mechanical Engineering or Mechanical Engineering Technology., • 8 to 15 years of experience in design and construction administration of HVAC systems., • Experience with field surveys, code analyses, calculations, equipment selections, and specifications., • Responsible for planning, creating, influencing, and finalizing designs involving integrated building systems HVAC and plumbing systems., • Strong communicator with skillset to supervise junior engineers and CAD operators as they develop contract drawings., • Self-starter with a passion for problem solving., • Professional Engineer license., • Proficient in either AutoCAD or Revit., • Proficient Microsoft Office applications, • Ability to conduct day-long field surveys outdoors and indoors in conditioned and unconditioned spaces, including walking up to 10-20k steps in a day, climbing up and down a 6-foot ladder, kneeling, squatting, and bending., • Strong written and verbal communication skills., • Excellent planning and organizational skills., • Strong desire to motivate, mentor, and manage the work of others supporting your projects, with emphasis on employee growth, project success, and overall performance., • Ability to obtain site access at client locations., • Fully paid individual health insurance, offering both HSA and PPO options with 50% of family premiums paid., • Dental and vision insurance is available., • 401K with employer automatically contributing 3% of gross salary with an additional matching option., • Fully paid, short-term and long-term individual disability insurance, term life insurance with Accidental Death and Dismemberment (AD&D) coverage., • Eleven paid (11) holidays and twenty-two (22) days of paid time off per year., • Education Assistance Program.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Company parties, • Dental insurance, • Free uniforms, • Health insurance, • Paid time off Cooper Tacia General Contracting is seeking a proactive and detail-oriented Field Safety Coordinator to support our growing project portfolio across our Mid-Atlantic division. Reporting directly to our Corporate Safety Manager, this individual will champion our safety culture by performing regular audits, facilitating training, and driving continuous improvement in all safety-related operations across our field sites. The ideal candidate is a confident communicator who can build trust while ensuring compliance with OSHA and company safety standards. Responsibilities: Conduct regular site safety audits and document findings using Safety Reports software. Provide coaching and on-site training to ensure teams are practicing safe work procedures in line with OSHA and Cooper Tacia policies. Monitor the execution of high-risk activities, working alongside contractors to implement the best safety practices. Represent Cooper Tacias safety interests on-site, advocating for the highest standard of health and safety. Investigate safety incidents as needed and assist in the development of corrective action plans. Travel to job sites, including overnight or extended stays, based on project needs. Continuously evaluate and recommend improvements to Cooper Tacias Health, Safety & Environmental (HSE) procedures. Requirements: OSHA 510/500 preferred. Minimum 3+ years of experience identifying safety hazards and implementing hazard controls on construction sites. Strong communication skills with a demonstrated ability to engage all levels of personnel in safety programs. Working knowledge of OSHA regulations and construction site safety standards. Experience creating and evaluating Activity Hazard Analyses (AHAs) and Pre-Task Plans (PTPs), with a clear understanding of their differences and applications. Proficiency with Microsoft Word, Outlook, and PowerPoint. Strong problem-solving and analytical skills. Valid drivers license and clean driving record. Employment Type: Full Time Salary: $60,000-$70,000 per year Benefits: 100% Employer Paid Health, Vision & Dental Insurance for employee. PTO/ Paid Holidays 401K W/ 3% Match Continued Education as needed Company Vehicle with Fuel Card Application Process: All interested individuals must submit a resume and three references. Email to: We are an equal opportunity and drug-free workplace. Pre-employment drug screening required. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of responsibilities, duties and skills required. Personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description JOB DESCRIPTION: • This position requires demonstrated technical proficiency in software design and configuration of MES solutions with integration capabilities to level two and four systems., • The Senior MES Engineer will interact directly with the customer and lead a team of Wunderlich-Malec engineers in identifying requirements, evaluating MES platforms, developing specifications, and implementing/testing/commissioning/qualifying MES solutions., • This position is a leadership role within the business unit and requires strong problem-solving ability, well-balanced people skills, an aptitude for business efficiency, and an interest in creating partnerships., • This position requires the ability to deliver innovative MES solutions and design standards either self-directedly or as a leader of a team. The candidate will act as a solution architect and must have the ability to conceptualize, detail, and implement MES Solutions for industrial processes and machinery that meet our customers’ requirements. This involves the development of an MES strategy that integrates process knowledge, equipment design, and quality standards with information technology to reduce downtime, elevate the level of regulatory compliance, and introduce efficiency gains through the effective use of available technologies., • This position oftentimes requires the following project management responsibilities: developing project execution plans, work breakdown structures, and associated budgets, task prioritization and scheduling, task ordering, time tracking, and reporting, financial tracking and reporting, early problem identification, conflict management/resolution, leading and supporting a team, and attending project status meetings. Also includes overseeing daily operations and activities of a project(s) up to $1M. This position is often responsible for ensuring the overall profitability of the project., • Education: A Bachelor of Science degree in Engineering, Computer Science or the Applied Sciences required., • Experience – Greater than 10 years with capabilities in the below areas is preferred:, • MES solution deployment experience with but not limited to Werum PAS-X, Sepasoft, or POMS, • Proven experience with all phases of MES projects including conceptual, basis of design, implementation, testing, start-up, and commissioning in the Life Science industry, • Familiarity with relevant regulatory requirements of the life science industry such as cGMP, 21 CFR Part 11, etc., • Demonstrated proficiency with designing and implementing integrated EBR recipes using GAMP5, S88, and S95 standards, • Understand the manufacturing processes and system configuration and make informed recommendations regarding optimal system configuration, • Understanding of warehouse and inventory management specifically in a GMP facility, • Support software and configuration required for external systems interfaces such as DeltaV, SAP, LIMS, PI, and Maximo, • Strong knowledge of historian technology and reporting systems, • Experience with relational databases such as SQL, Oracle, etc., • Strong knowledge of IT/OT networking, • Excellent technical writing and verbal communication skills, • Working knowledge of MS Office products, • Experience leading a team of engineers/technicians to provide MES solutions, • Experience mentoring less experienced engineers, • Professional references, preferably one from each of the following: a subordinate, a peer, and a manager by9UJrqno0

Job DescriptionWe are seeking a skilled and experienced Commercial Electrical Project Manager to join our team. As a Project Manager, you will be responsible for managing multiple projects installing, maintaining, and repairing electrical systems in commercial buildings. Your expertise in industrial and commercial electrical work will be essential in ensuring the safety and functionality of electrical systems. Key Responsibilities: • Project Support: Assist in all phases of the project lifecycle, including planning, scheduling, budgeting, and execution., • Coordination: Work closely with field personnel, subcontractors, suppliers, and clients to ensure project timelines and quality standards are met., • Documentation: Maintain project records, including contracts, change orders, submittals, RFIs (Requests for Information), and other relevant documents., • Scheduling: Assist in the development and management of project schedules, ensuring that milestones are achieved., • Budget Management: Help monitor project budgets, track expenses, and prepare reports on financial status., • Quality Assurance: Ensure that all work complies with industry standards, safety regulations, and company policies., • Problem Solving: Identify potential issues and work with the Project Manager to develop solutions., • Client Interaction: Communicate with clients to provide updates, address concerns, and ensure their satisfaction with the work being performed., • Site Visits: Conduct regular site visits to monitor progress and ensure adherence to project plans and specifications., • Safety Compliance: Assist in enforcing safety protocols on job sites and ensuring that all workers comply with safety standards., • Team Collaboration: Work closely with the Project Manager, estimators, and other team members to ensure project success.Qualifications:, • Education: Equivalent experience in the electrical industry may be considered., • Experience: 2 years in a project management or supervisory role., • Technical Knowledge: Strong understanding of electrical systems, blueprints, and construction documents., • Software Proficiency: Familiarity with project management software (e.g., Procore, MS Project) and basic office software (e.g., MS Office Suite)., • Communication Skills: Excellent verbal and written communication skills., • Organizational Skills: Ability to manage multiple tasks and prioritize effectively in a fast-paced environment., • Problem-Solving Skills: Strong analytical and decision-making abilities., • Physical Requirements: Ability to conduct site visits and inspections, including climbing ladders and working in various weather conditions.

Job DescriptionSalary: $41K to $46K Job Description: PURPOSE Responsible for the full life cycle of talent acquisition to fulfill the staffing needs of all clients in your branch. Contributes to the efficient Masis operations by performing their duties accurately and in a timely manner. ROLE AND RESPONSIBILITIES • This individual is responsible for planning and executing a consistently high volume of recruiting, • Manages new candidate generation and job order generation through Masis Staffing Solution CRM Software., • Keep updated records of termination of employment on CRM software and cooperate with unemployment, • Keeps strict attention to detail to all candidate related processes including screening, interviewing, training, onboarding, and termination., • Maintain a high fill ratio required for successful performance of the branch., • Develop creative recruiting strategies to bring valuable candidates to the, • Communicate efficiently with Branch Manager and Business Development Manager on the status of job orders and all other client or candidate relevant matters., • Maintain strict level of confidentiality and adherence to company policy while interacting with candidates and clients., • Create recruiting and interviewing plans for each open position, including collaboration with hiring managers on prescreening questions., • Creates a talent pipeline by building relationships with qualified candidates in prioritized skill sets; develops a pool of qualified candidates in advance of need., • Actively network through industry contacts, association memberships, trade groups and, • Commit to meeting or exciding performance goals set up by the executive team and safety standard goals established by the Risk, • Implement standards, procedures, and controls to improve data entry efficiency, accuracy, and performance., • Monitor compliance of branch with Masis Staffing Solutions policies and proceduresfor payroll., • Ensure timecards have the necessary fields and approval to meet industry best practices., • Troubleshoot case by case data entry issues and delays and design corrective actions to improve the overall process., • Send collected payroll data to the payroll department by specified deadline., • Perform other duties as QUALIFICATIONS AND EDUCATION REQUIREMENTS • College preferred., • Must have 2+ years successful recruiting or business development experience., • Strong interviewing skills and understanding of staffing industry., • Ability to speak more than one language highly desirable., • Proficiency in multiple computer software applications is necessary. REQUIRED SKILLS • Excellent verbal and written communication skills., • Excellent interpersonal skills with good negotiation tactics., • Proactive and independent with the ability to take initiative., • Excellent time management skills with a proven ability to meet deadlines., • Familiarity with laws, regulations, and best practices applicable to hiring and recruitment., • Proficient with Microsoft Office Suite or related software., • Ability to report to multiple levels of management., • Ability to successfully communicate with all levels of workforce., • Ability to select high quality/caliber talent., • Ability to engage and lead team meetings., • Proven track record driving & executing best in class service., • Proven sales and staffing expertise., • Drive a culture of execution., • Understand Financial reporting/statements., • High level of concentration. ADDITIONAL NOTES Routine office environment and various customer location visits. May require extended daily work schedule, occasional weekends, and travel.

Job DescriptionSalary: Pay grade: 174 We are seeking a Site Project Manager to lead our team supporting Fort Bragg (military experience not required). Our dedicated team has been supporting Fort Bragg with their energy efficiency and sustainability needs for over 20 years, primarily related to the Industrial Control Systems on base; HVAC Mechanical, HVAC Controls and BAS, Utility Metering, and other relevant systems and equipment. At Johnson Controls, we support our nations most critical facilities, the people who occupy them, and the missions they enable. Johnson Controls Federal Systems (JCFS) is a specialized team serving as a trusted partner to the federal government. We help modernize U.S. military installations, Department of Defense and other federal agency facilities to be smarter, more resilient, efficient, sustainable, and secure. Benefits: Eligible for benefits on first day of employment Vacation: 3 weeks paid vacation, 5 sick days, 3 floating holidays, and 10 standard holidays (6.5 weeks in total) Travel Required: None, all work is based at this location As a Project Manager, you will: • Serve as a primary on-site leader for execution on assigned projects, primarily related to commercial and industrial size HVAC mechanical and related control systems., • Manage the selection, scope of work, procurement, quality and payment of project materials, vendors and subcontractors., • Manage operational teams to drive excellence across multiple projects with Administrative, Technical, Quality Control, Safety and Project Management staff., • Negotiates, prepares and issues subcontracts., • Develop project schedules and execute them according to plan., • Ensure that assigned projects are done safely, accurately, on time, billed within budget and within scope of the contract., • Ensures work performed is in compliance with state, local and Federal legal requirements and operates on the job with the highest ethics., • Adheres to and ensures project personnel and subcontractors adhere to all safety standards, internal policies, and US Army Corps of Engineers requirements regarding health and safety., • Understand project and contract scopes; actively pursue growth opportunities that will help the customer achieve desired outcomes., • Help prepare and approve cost estimates, contract terms & conditions, and technical responses to client requests for information, bids, and proposals., • Ensure mechanics, technicians and subcontractors complete assigned work per established standards, and thoroughly communicate the services performed and completion criteria to customers., • Complete timely and accurate project billing to maintain profitability goals and positive cash flow., • Analyze financial reporting and project schedule to proactively address potential problems. Effectively communicates project progress, issues and financial status to leadership as required., • Provide periodic project status updates, and monthly revenue, cost, and gross margin forecasts., • Manage risk, establish project recovery plans, and resolve disputes to minimize escalation., • Ensure project document controls and deliverables comply with contract requirements and Johnson Controls standards., • Manages the selection, ordering, and delivery schedule of materials to be procured for the projects assigned., • Coordinates customer-training requirements. Required Qualifications: • Project Management experience with projects related to commercial or industrial size HVAC mechanical equipment (chillers, boilers, Air Handlers, VAVs, etc.) and related controls, BAS management, and/or Utility Metering Systems., • Experience managing project financials (P&L management experience)., • Strong verbal and written communication skills. Must have the ability to communicate technical material to a non-technical audience., • Proficient in Project Management software and financial accounting systems. Proficiency with Microsoft Project preferred., • Strong personal computer working capabilities in MS Office (Excel, Word, Powerpoint) and basic Windows environment., • Ability to obtain and maintain required government security clearances as needed. (This involves a background/character, criminal history, employment, and credit check.) Preferred Qualifications: • Experience working with projects including large HVAC mechanical equipment (chillers, boilers, etc.)., • Experience developing and implementing HVAC Direct Digital Control (DDC) systems, including programming, configuration, and visualization., • Knowledge and proficiency integrating low voltage building sub-systems using various industry protocols (i.e. LON, BACnet, Modbus, etc.)., • Experience working with design packages and submittals., • Experience reading and interpreting government contracts and government procurement standards., • Experience managing multiple trades and subcontractors. Preferred Education • Bachelors Degree in Mechanical, Electrical Engineering, Construction Management, or a related field, or equivalent work related experience. Who We Are At Johnson Controls (NYSE:JCI), we are One Team working collaboratively to create purposeful solutions that make a difference in the world. We are a Fortune 500 company with more than 100,000 employees worldwide offering the world`s largest portfolio of building technology products, solutions and services. As a member of our Federal Systems team, your work matters. We value and recognize your contributions and want to help you succeed. We invest in our employees, provide opportunities for growth and advancement, and foster a culture of inclusion and respect. To learn more about who we are and what we do, please check out our Take a Journey video. Recently, Johnson Controls has been recognized by several organizations for leadership in Environment, Sustainability and Governance, as well as innovations in smart building platforms: • Named to FORTUNEs Most Admired Companies List, • Corporate Knights Global 100 Most Sustainable Corporations in the World, • Named to ForbesNet Zero Leaderslist, • CDP 2023Climate Change 'A List', • Ranked 67 on the Drucker Institutes list of best-managed companies in America, • ForbesBest Employers for Diversity, • NewsweekAmericas Greatest Workplaces for Diversity, • Ethisphere 2024World's Most Ethical Companieslist for the 17th time, • NewsweekAmericas Greatest Workplaces for Women in 2024, • Named to Newsweek Americas Greatest Workplaces for Veterans 2024 / 2025listing, • Named toForbes Americas Best Employers for Veterans 2024, • Named one of the top military friendly employers by military.com. Johnson Controls is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit Division: JCFS (Johnson Controls Federal Systems) #LI-MG3 #LI-Onsite

Job DescriptionWith over 50 stores and the largest avocational cooking program in the US, Sur La Table offers an unsurpassed selection of exclusive and premium-quality goods for the kitchen and table – and the culinary expertise and inspiration to go along with it. Whether the job entails interacting with our customers, driving digital growth, or providing vital behind-the-scenes support, we’re all here for the same reason – to roll up our sleeves and create happiness through cooking and sharing good food. Position OverviewAs a Seasonal Chef Instructor, Pastry at Sur La Table, you are the in-store expert and advocate for all things baking and pastry arts. You deliver #bestincenter service, a company-wide standard for excellence in service, by sharing specialized knowledge in pastry techniques, baking fundamentals, and personalized instruction that supports all company initiatives. The Seasonal Chef Instructor, Pastry plays a key role in inspiring a love for baking while driving sales of bakeware, mixers, and decorating tools through hands-on pastry classes and engaging culinary instruction. Key ResponsibilitiesCustomer Experience & Brand Representation· Represent Sur La Table’s brand and culture by creating memorable, educational experiences that inspire repeat visits and customer loyalty. · Deliver an exceptional in-store culinary experience focused on pastry and baking classes that reflects Sur La Table’s passion for food, teaching, and high standards, while following the provided recipes and game plans to ensure consistency and quality.· Communicate technical concepts and advanced pastry skills in a clear, encouraging, and approachable manner.· Maintains expertise by staying current on products, actively engaging in available training, and independently seeking out additional resources.Sales & Business Performance· Drive sales by upholding kitchen standards, encouraging second class sign-ups through strong customer engagement, and promoting retail items used or featured in class.· Deliver class revenue goals by ensuring high enrollment, positive reviews, and guest return rates.· Consistently meet or exceed culinary program goals by delivering exceptional classes that drive customer engagement and sales. Performance is measured by key KPIs such as second-class sign-ups, retail culinary product sales, and guest feedback through Google reviews.Team Engagement & Store Support· Assist in setting up and breakdown of classes including organizing mise en place, prepping ingredients, and cleaning workstations.· Clean and sanitize dishes and equipment promptly to ensure smooth kitchen operations.· Assist with restocking, organizing, and maintaining kitchen supplies and tools to support overall store readiness. Operations & Compliance· Ensure compliance with food safety standards, local health codes, and sanitation regulations.· Properly handle all tools, ingredients, and kitchen equipment to maintain a safe and efficient work environment.· Maintain accurate inventory levels, minimize shrink, and control supply and culinary expenses.· May handle liquor, wine, and beer in compliance with state and location alcohol regulations, company policies, including enforcing age restrictions.· Ensure store safety and cleanliness, addressing any maintenance needs promptly.· Adhere to applicable wage and hour laws. Accurately records time worked according to SLT Policy.· Model and ensure consistent adherence to all Sur La Table policies and standard operating procedures (SOPs). Physical Requirements· Ability to communicate verbally and work cooperatively with associates and customers.· Ability to remain standing for up to 4 hours at a time.· Ability to move about the store directing class participants while selling to customers and retrieving merchandise from stockroom or sales floor.· The capability to accurately perceive and differentiate variations in intensity or quality of flavors or odors, or to identify specific tastes or scents using the tongue or nose.· Ability to grab, reach, push, pull, bend, stoop, kneel and crouch to demonstrate, retrieve and/or replenish merchandise and/or cooking equipment.· Ability to use hands to seize, hold, grasp, turn, or otherwise to chop, whisk, slice, stir, juice and/or demonstrate other techniques.· Ability to lift and/or move merchandise weighing up to 50 lbs.· Ability to ascend/descend ladders to retrieve and/or move merchandise.· Ability to operate a computer, POS system, keyboards, merchandise scanners and mouse to accomplish work.· Available to work between 12 and 16 hours per week, with a flexible schedule, including nights, weekends, and holidays. While this is the minimum availability, scheduled hours may differ based on business needs.· Regular and predictable attendance with the flexibility to adjust class assignments based on demand.· Ability to work in a variable kitchen environment included but not limited to open flames, hot surfaces, temperature variations, various food allergens both physical and airborne. Qualifications & Experience· Must be 21 years of age or older at the time of employment.· A degree in culinary arts is preferred; however, candidates with extensive culinary experience and demonstrated technical proficiency will be considered in lieu of formal education.· 1-2 years of kitchen operations experience.· Valid Food Manager Certification.· Excellent communication, problem-solving, and decision-making abilities.· Passion for community engagement and providing exceptional customer experiences.This job description represents a summary of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. Responsibilities, tasks, and duties of the jobholder might differ from those outlined in the job description and other duties, as assigned, may be part of the job. This job description is not an employment agreement or contract. Sur La Table has the exclusive right to alter this job description at any time without notice. The CSC family of brands provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, provincial, state or local laws. It is unlawful in Massachusetts to require or administer a lie-detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The CSC family of brands is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, please contact . We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFull job description Who We Are As a trusted partner in automotive services across North and South Carolina, Carolina BG is dedicated to empowering businesses through training, development, and the utilization of industry leading products and equipment. With 50+ years of success and a clearly defined 10-year vision, we are committed to our core values, focus, and processes that create opportunities for our employees to grow and succeed. We prioritize personalized, consistent customer service internally and externally, and foster a supportive and growth-oriented team environment. About the job Carolina BG is looking for an enthusiastic, driven, hungry-for-growth sales leader who is capable of relationship building and outside sales territory development as part of a growing company. This position will service an established sales territory in the Carolinas consisting of independent garages and car dealerships within a defined area. An excellent opportunity to join a driven team and to grow a sales territory in a rapidly expanding market. What you will do • Coordinate client visits, trainings, and or arrange for product demonstrations, as necessary, • Strengthen and expand relationships with existing clients, • Deliver superior customer service through excellent communication of products / service needs and by offering consistent inventory management., • Meet with clients to address concerns & opportunities, and provide solutions, • Create and conduct sales and general information presentations to existing and prospective clients., • Find and develop new business relationships through cold calling and lead follow-up, • Demonstrate consistent sales abilities by meeting objectives set by the company, • Forecast and report incoming business activity on a routine basis, • Work within the organization and industry to keep fully abreast of new products or product applications that can further support our company or our customers., • Be accountable and aware of the financial activity within your book of business, • Respect and value others, • Ownership, responsibility for decisions and actions, • Teamwork, the ability to move together towards a common goal, • Tenacity!, • Strong communication and interpersonal skills, • Negotiation and closing skills, • Ability to work independently and manage time effectively, • Presentations and public speaking, • Analytical and problem-solving abilities, • BA or Associates degree in a related field (Preferred not required), • Rare opportunity to join a high performing team, • Upbeat innovative Culture, • Competitive compensation package commensurate with experience and education, • Excellent Benefit Package - Medical, Dental, Vision, Life Insurance and 401K, • 6 Paid Holiday, • Initial compensation package of $60,000 - $70,000, as a weekly draw against commissions Job Type: Full-time Pay: $60,000.00 - $125,000.00 per year Benefits: • 401(k), • 401(k) matching, • Company car, • Dental insurance, • Employee discount, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Paid training, • Retirement plan, • B2B sales: 2 years (Required), • Strategic partnerships: 2 years (Preferred)

Job DescriptionSalary: 70,000-75,000 Blue Ribbon Residential Construction is a leading residential remodeling company dedicated to transforming homes into beautiful functional spaces that exceed our clients expectations. With a focus on quality craftsmanship, attention to detail, and superior customer service, we pride ourselves on delivering exceptional results on every project. We are seeking a highly organized and experienced Project Manager to lead our team in the successful execution of remodeling projects. The ideal candidate will have a proven track record in residential construction project management, strong leadership skills, and a passion for delivering high-quality results. As a key member of our team, the Project Manager will be responsible for overseeing all aspects of project planning, execution, and completion while ensuring adherence to timeline, and quality standards. POSITION SUMMARY As a project manager you will oversee all aspects of residential renovation projects, ensuring they are completed on time, and to the client's satisfaction. Responsibilities include coordinating with clients, the design team, and subcontractors; developing timelines; working with our Purchasing Dept. to procure materials and vendor services; conducting site visits to monitor progress and quality; resolving issues and conflicts; and maintaining communication with all parties involved. The project manager also enforces quality standards, complies with building codes and safety regulations, and documents project activities. Our goal is to deliver high-quality remodeling projects while fostering positive relationships and ensuring a seamless experience for clients. ESSENTIAL FUNCTIONS • Attend project kickoff meetings to review project scope, expectations, and deliverables with impacted parties., • Create detailed project schedules, and resource allocation plans to ensure efficient project execution., • Work with Purchasing Dept. to procure materials, equipment, and subcontractor services in a timely manner to support project timelines and budget requirements., • Conduct regular site visits to monitor project progress, inspect workmanship, and address any issues or concerns that may arise., • Manage subcontractors and vendors, including overseeing work performance, and resolving disputes or conflicts as needed., • Communicate effectively with clients to provide project updates, address questions or concerns, and ensure satisfaction throughout the remodeling process., • Enforce quality control standards and ensure compliance with current building codes, safety regulations, and industry best practices., • Document project activities, including daily progress reports, change orders, and project photos to maintain accurate project records., • Anticipate potential project risks or obstacles and develop contingency plans to mitigate their impact on project timelines and budgets., • Foster positive relationships with clients, subcontractors, and team members to promote a collaborative and supportive work environment., • Adhere to company policies and procedures., • At least 3-5 years experience in residential remodeling project management., • Construction management higher education preferred., • Understanding of MS Office like excel, word and CRMs., • Outstanding written and verbal communication skills., • Enjoy learning, problem solving and achieving goals., • Strong knowledge of project planning, renovation execution, and scheduling., • Excellent communication, negotiation, and leadership skills., • Ability to work in a fast-paced environment and be able to adapt quickly., • Knowledge of residential construction materials, applications, and take-off lists., • Experience using construction management platforms like CoConstruct or BuilderTrend., • Active listening to hear team members, client needs, collaborate internally, and respond appropriately., • Maintain a valid drivers license and state required insurance., • Dress and groom neatly and professionally., • Candidates must successfully pass a background check and be authorized to work in the U.S., • Ability to work in a constant state of alertness and safe manner., • Frequent standing, walking and sitting., • Frequent lifting and carrying up to 50 pounds., • Ability to travel to a job site as needed., • Competitive salary commensurate with experience, • 401k

Job DescriptionJob Description About MyComputerCareer (MyCC): At MyComputerCareer, we’re transforming lives through tech education! Our mission-driven team is dedicated to helping students achieve life-changing careers in IT. With a family-like culture rooted in Love, Customer First, Excellence, and Ethics, we’re focused on making a lasting impact. Join us and be part of a dynamic, fast-paced environment where your contributions truly matter. Compensation Range (Hourly, non Exempt): $38-40K Candidates can reside in one of the following states: AL, AR, AZ, FL, GA, ID, IN, KY, LA, MI, MO, MS, NC, NV, OH, OK, SC, PA, TN, TX, UT, VA, and WI Location: Remote Schedule is subject to change: Monday/Wednesday: 11am - 9pm Est Tuesday/Thursday: 10am - 7pm Est Friday: 10am - 6pm Est Saturday: May rotate working a Saturday instead of Friday once a month or as needed PURPOSE OF POSITION: It is the role of the Financial Planner to meet with potential applicants. Financial Planners educate the applicant on his/her Title IV eligibility and provide applicants with the necessary tools to make an informed decision all while providing exceptional customer service. Financial Planners will counsel students regarding financial aid eligibility, application procedures, aid programs, costs, indebtedness, money management, and financial planning individualizes information to the particular needs and situation of the student. Due to the nature of this role, attention to detail, analytical ability, and willingness to perform complex tasks/multitask are essential. A financial planner must maintain a high degree of confidentiality. ESSENTIAL JOB DUTIES AND RESPONSIBILITIES: * Provide financial aid assistance to prospective and enrolled students. * Support the Director of Financial Planning and Financial Counselor Manager in maintaining Financial Aid Programs and compliance. * Assist Veterans in the completion of the VA Benefits Application * Ensure compliance and confidentiality with all federal, state, and internal policies and procedures * Provide clerical support to both the Director of Financial Planning and Financial Counselor Manager. * Counsel perspective students on financial aid eligibility and payment options * Work closely with other Financial Planners and staff all working toward departmental goals. * Answer questions, inquiries or requests from students and parents in person or in writing regarding financial aid programs and eligibility. * Perform other duties as assigned. * Following an initial 60-day training period, you will receive specialized training to manage simultaneous calls with students, which is a primary responsibility of this role. By the 90-day mark, you are expected to achieve proficiency in handling dual calls, ensuring effective communication and support for our students. Mastery of this skill is crucial for successful performance in this position. KEY COMPETENCIES: * Providing exceptional customer service in any/all situations * Excellent computer skills and commitment to use of technology * Communicating effectively (oral and written) * Keeping Customer Confidentiality * Demonstrating ethics and integrity * Maintaining a positive, helpful attitude EDUCATION & EXPERIENCE REQUIREMENTS * High School Diploma/ GED-Required * Associate and/or Bachelor’s Degree preferred or a combination of education and experience. * 2 years customer service experience preferred * Financial Aid Experience preferred, but not required * Proficiency with MS Office, navigating the Internet, and learning database software systems is essential * Salesforce experience a plus PHYSICAL AND COGNITIVE DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly required to: * Listen to potential students (on both phone and video platforms) and communicate verbal and written feedback. Must be able to exchange accurate information in these situations. * Analyze financial aid paperwork and detect concerns or areas for improvement. * Frequently move about the office. * Maintain a high level of consistent cognitive function to effectively assist students * Stoop, kneel or crouch when maneuvering the office environment. * Lift up 25lbs at times. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions and perform any other duties, as assigned by their manager. We are an Equal Opportunity Employer.

Job Description Do you want to be part of a growing, well established, family friendly company? Samet, headquartered in Greensboro, NC is looking for an experienced, hard working, dynamic leader to join our team in Raleigh, NC! Currently, Samet is seeking a Construction Professional to join our team as a Sr Project Manager, with a focus in the Multifamily sector, to lead our team to excellence! The Samet team provides a portfolio of diversified professional contracting services for construction of commercial/industrial, education, multi-family and medical/healthcare construction projects. Due to continued growth, Samet seeks a SRPM to lead project efforts in our Raleigh, NC region. As a Sr Project Manager you will be responsible for: • Coordinating and directing project design, permitting and construction from owner contract negotiation through project closeout., • Financial, quality and safety performance of assigned projects., • A minimum of 10 years' experience managing commercial/industrial, education, multi-family or healthcare construction projects, • Demonstrated success at running $25-$75 million projects, • A 4 year degree in engineering, construction management, business administration or comparable relevant experience, • Strong leadership, management, computer skills and attention to detail, • LEED AP or LEED Green Associate is preferred As a Member of the Samet Team, you can expect: • Generous Paid Time off, • Parental leave, • Bonus Pay, • Comprehensive Benefits Coverage: HSA & Traditional, • Great Team & Culture Environment, • Tuition Reimbursement, • Wellness Rewards, • 401K with company match Everify

Job Description Who We Are: Bandwidth, a prior "Best of EC" award winner, is a global software company that helps enterprises deliver exceptional experiences through voice, messaging, and emergency services. Reaching 65+ countries and over 90 percent of the global economy, we're the only provider offering an owned communications cloud that delivers advanced automation, AI integrations, global reach, and premium human support. Bandwidth is trusted for mission-critical communications by the Global 2000, hyperscalers, and SaaS builders! At Bandwidth, your music matters when you are part of the BAND. We celebrate differences and encourage BANDmates to be their authentic selves. #jointheband What We Are Looking For: The People Services Manager works closely with a Sr. Director/Director of People Services to serve as strategic business partner to the departments they work with. They will support the development and execution of people programs that help employees grow and thrive. They'll work closely with other People Services teams to implement initiatives that strengthen culture, enhance employee experience, and support organizational goals. Key responsibilities include staffing support, program administration, and providing guidance to managers in day-to-day people management. The People Services Manager ensures documentation, processes, and programs are executed effectively while contributing to areas such as compensation and career progression. This role provides coaching to managers and supports the business at a tactical level, while gaining exposure to strategic initiatives through partnership with senior leadership. What You'll Do: • Establishes, develops, and maintains a strong partnership and relationship with team members to support the effectiveness of the organization., • Serves as a liaison and advocate between the departments, other Business Partners, and other People Services teams (L&D, Recruiting, Compensation, etc.)., • Collaborate closely with the Business Partner team to ensure effective delivery of people-focused programs. Understand department goals and coordinate the people programs with the People Services functional areas and locations., • Maintains accurate and confidential employee records to ensure compliance with legal requirements and company policies., • Works closely with and advises leadership, assisting managers in coaching employees for professional development and performance management., • Supports Learning and Development create and facilitate training programs that contribute to the growth and development of Bandmates. Ensures effective People service delivery, coordinating with corporate and regional teams, particularly at sites without People Services on-site presence., • Partners closely with Director/Sr. Director of People Service to support strategic development, long-range people development, department planning, staffing initiatives, talent management, compensation and rewards, organizational effectiveness, team development, employee relations, performance management, and recognition programs., • Assists in guiding leaders through conflict resolution, employee relations issues, and the application of People policies, procedures, and practices., • Education: Bachelor's degree in Business, Human Resources or similar concentration, • Experience: 1–2 years of human resources experience (either generalist, recruiting, employee relations, compensation etc), • Skills:, • Hands-on recruiting experience or business coaching, • Familiarity with training and compensation/career progression programming, • Functional knowledge of business unit operations, structure and work processes. Knowledge of federal and state employment laws and regulations, • Thrive in a changing environment and deal with ambiguity. Competent in managing multiple projects simultaneously across diverse functions, sites, and countries, • Knowledge of human resources processes, procedures, and practices, • Working knowledge of equal employment principles, concepts and methodology., • Strong interpersonal and communication skills and the ability to work effectively with a wide range of constituencies in a diverse community and in a confidential manner, • Demonstrated ability to develop high credibility, • Ability to consult with and advise business unit managers and employees on their HR-related issues and to engage the appropriate internal or external resources in order to resolve problems or answer questions, • Ability to understand the business and issues relevant to the business segments supported, • Skilled in examining operations and procedures, and developing and implementing new strategies and procedures, • Write clearly and succinctly in a variety of communication settings and styles. Excellent computer, analytical, and organizational skills, • Work closely with others as part of a team while being able to take full responsibility for a task At Bandwidth, we're pretty proud of our corporate culture, which is rooted in our "Whole Person Promise." We promise all employees that they can have meaningful work AND a full life, and we provide a work environment geared toward enriching your body, mind, and spirit. How do we do that? Well… • 100% company-paid Medical, Vision, & Dental coverage for you and your family with low deductibles and low out-of-pocket expenses., • All new hires receive four weeks of PTO., • PTO Embargo. When you take time off (of any kind!) you're embargoed from working. Bandmates and managers are not allowed to interrupt your PTO – not even with email., • Additional PTO can be earned throughout the year through volunteer hours and Bandwidth challenges., • "Mahalo moments" program grants additional time off for life's most important moments like graduations, buying a first home, getting married, wedding anniversaries (every five years), and the birth of a grandchild., • 90-Minute Workout Lunches and unlimited meetings with our very own nutritionist. Are you excited about the position and its responsibilities, but not sure if you're 100% qualified? Do you feel you can work to help us crush the mission? If you answered 'yes' to both of these questions, we encourage you to apply! You won't want to miss the opportunity to be a part of the BAND. Applicant Privacy Notice

Job Description Construction Engineering Technicians Future Opportunities Requisition Number: 2022-2300-00 We are currently seeking individuals interested in starting or advancing their career as an Engineering Technician (from entry-level to senior). Join our Construction Services team in one of our 30+ offices. Job Snapshot: As an Engineering Technician, you will make a difference! The field testing and observations of construction materials you perform each day help ensure compliance with industry standards and project specifications. You will see construction projects from beginning to end, documenting the successful placement and use of soil, concrete, rebar, asphalt, aggregate, and other building materials. It is our job to make sure it is "built right", and at S&ME we take that responsibility very seriously. Join us and become part of the team that makes construction a success. Complete transparency, working outside (most of the time) isn't for everyone, and some projects are more spectacular than others. However, as you advance in your career, you will see more and more projects where you can say, "I helped them build that." Responsibilities can include: Technicians I, II, and III: • Reviewing plans and specifications in preparation for field observations on construction sites, • Documenting field activities, observations, and testing results on projects, • Daily use of Metafield®, and/or other field and laboratory information management systems, • Calibrating field and laboratory equipment to industry codes and standards, • Perform Special Inspection observations per the International Building Code (IBC), • Same as above with the addition of the following:, • Ability to mentor less experienced construction staff and interns, • Ability to train and coach less-experienced construction staff in testing and observation procedures, • Coordination and direction of others on projects requiring multiple construction staff, • Assisting project manager with plan and specification review for proposal preparation, project assignments, and training, • Serve as a Special Inspection agent, based on certifications and local IBC requirements, • Assisting project manager with resolutions for deviations from project plans and specifications Education/Experience Qualifications: • High School diploma/GED, • Technician I:, • 0-2 years of experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials, • ACI Certifications preferred, • Technician II:, • 2+ years of experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials, or equivalent experience and an associate degree in a related field, • ACI Certifications preferred, • Technician III:, • 3+ years of experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials, or equivalent experience and an associate degree in a related field, • ACI Certifications required, • Additional certifications through ICC, NICET, and/or DOT are preferred. Can vary based on experience, • Senior Technician (IV):, • 5+ years of experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials. Oversight and/or mentoring experience of junior staff preferred, • ACI Certifications and additional certifications through ICC, NICET, and/or DOT are required. Can vary based on experience Required Qualifications: • Effective communication skills (speaking, reading, and writing) using the English language, • Proficiently complete data entry into multiple software applications on a smart device, using Microsoft Office and email, • Effective math skills with a basic understanding of weight, volume, pressure, and units of measure Preferred Certifications: • American Concrete Institute (ACI): Field Testing Grade I, International Code Council (ICC) in the areas of construction materials, Post Tensioning Institute (PTI), and/or other certifications depending on the level of experience Working Conditions and Physical Demands: You are willing and able to perform the physical demands of this position with the use of Company-provided Personal Protective Equipment such as: • Working outdoors the majority of the time in varying weather conditions, • Walking over rough and uneven terrain, • Standing up to 8 hours a day, up to 12 hours on occasion, • Routinely lifting and carrying 40-50lbs, (field/laboratory samples and equipment), • Maneuver field equipment safely, such as a loaded wheelbarrow, on uneven ground and around active construction sites, • Traveling out-of-town (typically overnight) for assignments as necessary, • Working outside of normal business hours when necessary Pay rate is based on the level of experience and active certifications. S&ME Benefits to Help You Thrive: • Competitive Compensation, • Medical/ Dental/ Vision Plans, • Health Savings Account with company contributions/Flexible Spending Account, • 401(K) with Matching and Employee Stock Ownership Program (ESOP), • PTO / Holidays with the ability to carryover, • Credential Incentive Program and Tuition Reimbursement, • Company Vehicle with gas card (if applicable), • Referral Bonuses About S&ME: S&ME is a prominent engineering firm with 1,100 proud and dedicated employee-owners. Your daily dedication, as a partial owner, drives our shared success. Employee ownership is crucial; we are invested in each other and S&ME's success. Personal and professional growth, fueled by development, leadership, and engagement efforts, propels us forward. Our commitment to our purpose of "helping you prosper" and our culture shines through these programs. We value eager, honest, hard-working employees making positive community impacts. Our people are the heartbeat of our company. As individuals we are great, and together we are even better. Join us to help make a difference. This is a full-time position with competitive pay based on experience. The successful candidate must meet the requirements of the company's Fleet Management Program, Substance Policy, and Reference Check Program. Only qualified candidates with acceptable employment eligibility verification (I-9) will be considered. Visa assistance is not provided. S&ME reserves the right to fill this position with an internal or external candidate at any time during the search. S&ME is not responsible for unauthorized job postings or submissions of resumes using external links/websites. No candidate/recruiter calls, personal calls, or walk-ins are accepted. Job Posted by ApplicantPro

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company car, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • 401(k), • Company parties, • Competitive salary, • Signing bonus, • Relocation bonus In your application please provide us a project list detailing completed projects, including size, scope, and role in execution. Responsibilities: Take charge of all phases of construction for water treatment projects, including wastewater treatment plant upgrades, new drinking water treatment facilities, and advanced pumping stations. Guide projects from initial site preparation through to final commissioning, ensuring adherence to rigorous timelines and budgets. Manage project budgets meticulously, tracking all expenditures and making necessary adjustments to avoid overruns. Drive cost-effective construction practices while ensuring that quality and performance standards are never compromised. Act as the primary liaison between clients, engineering teams, regulatory agencies, and subcontractors, facilitating effective communication and collaborative problem-solving. Ensure that all construction activities comply with applicable environmental regulations and safety standards. Oversee the permitting process and ensure that all quality control measures are in place, from materials selection to final system testing. Anticipate potential project risks, including site conditions, weather impacts, and logistical challenges. Develop and implement robust risk mitigation strategies and lead the team in resolving issues swiftly to keep the project on track. Requirements: Minimum of 10 years in Construction project management, with at least 3 years focused on managing wastewater and water treatment projects. Bachelors degree in civil engineering, Construction Management, or related field. Candidates with equivalent relevant experience in lieu of a degree will also be considered. Strong knowledge of water treatment technologies and systems, proficient in Procore, Microsoft Project, and other relevant software. Proven ability to lead multidisciplinary teams, manage complex projects, and foster strong client relationships. Employment Type: Full-Time Salary: $140k-150K Per Year total compensation package (base salary + 3 % Project bonus package) Benefits: 100% Employer Paid Health, Vision & Dental Insurance for employee. PTO/ Paid Holidays 401K W/ 3% Match Continued Education as needed Relocation Assistance Sign on Bonus of 15,000 We are an equal opportunity and drug-free workplace. Pre-employment drug screening required. Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of responsibilities, duties and skills required. Personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Job Description JOB LOCATION: Raleigh/Wilson, NC areas POSITIONS: 1 PRIMARY FUNCTION: The efficient management of assigned projects. Position has direct responsibility for contract administration, change orders, claims and completion of assigned projects on time within specifications and budget. Candidate will report to the Division Manager, Senior Project Manager, or General Superintendent. ESSENTIAL DUTIES: 1. Assist Vice Presidents and Division Managers in estimating, contract development and administration., 2. Assist Division Manager and Superintendent in progress schedules and scheduling support crews and subcontractors., 3. Meet with engineers, architects and clients to coordinate and price required design changes and to negotiate change orders as necessary., 4. Review and evaluate plans and specifications, cost, schedules, job assignments, equipment utilization and needs, personnel needs, and selection and performance of subcontractors., 5. Review and execute plan revisions, work orders and claims as needed., 6. Review accounts receivable and accounts payable to insure proper billing of estimates, cost and payment of completed work., 7. See that new personnel receive proper orientation to acquaint them with company policies, safety requirements, and job responsibilities., 8. Advise managers as to how improvements could be made in such areas as crew sizes, performance methods, techniques, quality work, value engineering, etc., 9. Insure completion of all work assigned to the division with emphasis on safety, quality, cost and time., 10. Monitor and insist upon compliance of all federal, state and local regulations, OSHA, MSHA, corporate safety, American Disabilities, affirmative action and equal employment regulations and guidelines., 11. Review accounts receivable and accounts payable to assure proper billing of estimates, cost and payment of completed work., 12. Assist and direct personnel in the proper use and maintenance of equipment, improving job performance, controlling cost, increasing productivity, improving communications, and adhering to company policies., 13. Maintain good working relationship with general public, engineers, architects, inspectors, property owners, and customers to facilitate job progress and to promote a positive company image. Develop a courteous and considerate attitude towards these groups., 14. Perform additional duties as required or as directed by the Vice President or Division Manager., 15. Must have regular and predictable attendance. MINIMUM REQUIREMENTS: Education: • Experience with CADD, Site Work, and Estimating software., • Construction experience in heavy civil construction or a degree in engineering or construction management., • Candidate should reside within a one (1) hour drive to Raleigh or Wilson NC or would need to relocate to the area., • Ability to work independently, self motivated, able to read construction plans and have computer skills. PHYSICAL DEMANDS: Light physical effort required including pulling and lifting or moving light weight material with occasional lifting or moving materials or equipment (over 5 and up to 25 pounds). PHYSICAL ACTIVITY: Position is normally very good working conditions such as an office environment, but may require infrequent work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment may be required. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.

Job Description About Us: Pickett, an ESP Associates company, is a highly innovative surveying and engineering company with over 60 years of industry experience serving clients throughout the US and Caribbean. At Pickett, we use the acronym S.O.L.V.E. to define our core values that include: Safety first, Outstanding service, Lasting relationships, Valued teamwork and Engaged culture. “We solve the problems that matter” and we are always looking to add passionate, motivated, and qualified individuals to our rapidly expanding team. About the Role: As a Senior Project Controls Specialist, you will be responsible for providing financial and business support to our Project Managers while preparing comprehensive action plans, resources, timeframes and budgets for projects and senior leadership. You will perform various tasks, including scheduling and risk management, maintaining project documentation, handling financial queries and other administrative duties. To succeed in this role, you should have excellent time management and communication skills, as you’ll collaborate with clients and internal teams to deliver results on deadlines. What You Will Be Doing: • Provide oversight of Project Controls Specialists and Project Coordinators, • Assign projects and monitor progress of project controls team members, • Work closely with Leadership to maintain consistent processes and incorporate new tools, templates, and methodologies, • Review roll-up of project portfolio to identify risks and opportunities, • Maintain good communication with all stakeholders and facilitate project management best practices across the organization, • Lead project controls for large, complex projects, and Major Projects, • Review, manage, and create tools for project reporting at the corporate level, • Develop and maintain specialized reports for Senior Leadership use, • Work closely with the contracts team on contract management, reviews and organization, • Responsible for supporting project management activities in developing, updating and tracking project costs and schedule, producing reports, as well as maintaining associated systems, • Develop proposals and baseline schedules using Microsoft Project, • Coordinate with clients and team leads to identify and define requirements, scope and objectives, • Prepare reports that outline the projects financial positions in areas of funding and costs, • Assign tasks to internal teams and assist with schedule management, • Make sure the client’s needs are being met as projects evolve, • Coordinate change orders with subconsultants, • Analyze risks and opportunities, • Use tools to monitor project progress, working hours, expenditures and project cash flow, • Create and maintain comprehensive project documentation, plans and reports, • Ensure standards and requirements are being met through QA/QC, • Bachelor’s degree or equivalent in Engineering, Construction Management, Finance, Business or related field (preferred), • PMP certification (required), • Minimum of 8 years of experience in project cost and schedule controls (required), • Strong working knowledge of Microsoft Project and Microsoft Planner (required), • Experience with Primavera P6 (preferred), • Hands-on experience with project management tools, Earned Value, Risk Analysis, ERPs or similar accounting tool (required), • Familiarity with risk management and quality assurance control, • Knowledge of project management, from conception to delivery, scheduling and cost control techniques, • Ability to prepare and interpret flowcharts, schedules and step-by-step action plans, • Excellent communication and interpersonal skills (both verbal and written), • Strong client-facing, teamwork and organizational skills, including multitasking and time- management, • Ability to work well in a team environment with minimal supervision, • Ability to work in a safe manner and obey safety regulations at all times, • Must be proactive, detail oriented and highly organized You will have the opportunity to learn, grow and directly contribute to our business. You will also have a very visible and tangible impact by solving real world problems. You will contribute significantly to the growth and development of our company while also continuing to be challenged and inspired along the way! Pickett offers an excellent employee benefits package including: • Competitive compensation with yearly performance reviews and discretionary annual bonuses, • 401(k) (Traditional & Roth plans) with a guaranteed employer match of 100% up to the first 3% and 50% on the next 2% (eligibility after 60 days), • PTO (Paid Time Off) & 10 Paid Holidays, • Tiered Health, Vision & Dental Insurance Options (eligibility after 30 days), • Behavioral Medicine through Teladoc, • Short-Term Disability Insurance, • Long-Term Disability Insurance, • Life Insurance, • Pet Insurance, • Education Reimbursement Opportunities, • Flexible and Dependent Benefits Plan, • Referral Bonuses

Job DescriptionCompany Description From the inception of a project through to completion and beyond, Turner & Townsend help to deliver the outcomes that matter through transformational projects covering the full spectrum of consultancy, project delivery and post-project operations. With offices located globally, you're never far away from our services. With over 22,000 specialists in more than 60 countries, we blend local knowledge with global insight to tackle challenges of any scale. Our team is dynamic, innovative and client-focused, supported by an inclusive and fun company culture. Our clients value our proactive approach, depth of expertise, integrity and the quality we deliver. As a result, our people get to enjoy working on some of the most exciting projects in the world. Job Description Turner & Townsend are looking for a Cost Manager/Quantity Surveyor to join our team and support construction cost services for our clients. The ideal candidate will be driven and promote our Turner & Townsend purpose and values. Responsibilites: * Advising client on strategies, managing prequalification of vendors, assessing proposals, bids, and bid levelling documents, making final recommendations to the client, attending & chairing bid interviews, and managing appointment process * Manage estimating services for full project by developing project estimates (relating to construction, fees, direct work and other costs), reviewing estimations prepared by junior team members, presenting estimates to client, presenting value engineering recommendations and risk assessments to client, meeting with vendors to review, validate, and challenge costs, and reviewing estimates by utilizing benchmark data collected from other projects * Manage cost reporting by establishing reporting schedule, reviewing & presenting cost reports and forecasts, reviewing project budget & spend forecast with the client, developing & maintaining commercial risk register, and hosting periodic meetings with project team & vendors * Manage cost control process by reviewing payment application assessments prepared by junior team members, liaising with project managers to recommend contractor entitlements, reviewing requests for change orders from vendors & making recommendations to client, and using dispute prevention/management/resolution procedures to manage payment requisitions, change orders, and contractual disputes * Manage & monitor invoicing process * Benchmark performance against other successful commissions. * Manage all facets of the final accounting process and post contract audits and account close outs. * Hold post-contract reviews with the client to establish a lesson learned document and apply lessons to create training manual * Develop procedures governing handover of project * Perform all the duties above through the use/preparation of Bid Analysis Sheets, Change Control Forms, Cost Estimating Software, and Take-off Software * SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Project/Program specific responsibilities: • Assisting in overall project cost management and forecasting; generating project cost reports and chairing cyclical project forecast meetings with functional stakeholders;, • Providing vendor procurement, project funding, change management control, invoice review, savings capture, and risk management services, • Market sector experience: Manufacturing with more than 1 year experience, • Project/program size in dollar value: $1.3B, • Software specific requirements: Excel, Microsoft, SAP, Ariba Qualifications Bachelor’s degree in construction management, cost management, quantity surveying, engineering or field related to construction. * Minimum 3-5 years of relevant experience working in a cost management role in the construction industry. * RICS accredited or working towards it is valuable * Experience supporting cost management on medium or large sized construction projects. * Construction consultancy experience is strongly preferred. * Good knowledge of construction industry technical matters, such as different procurement routes, value management and value engineering. * Strong communication skills Additional Information Turner & Townsend is an Affirmative Action and Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity Posters If you’d like to view a copy of the company’s affirmative action plan, please email . If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact the Human Resources Department at 713-457-9400 or . This telephone line and email address is reserved solely for job seekers with disabilities requesting accessibility assistance or an accommodation in the job application process. Please do not call about the status of your job application if you do not require accessibility assistance or an accommodation. Messages left for other purposes, such as following up on an application or non-disability related technical issues, will not receive a response. Turner & Townsend carefully considers multiple factors to determine compensation, including a candidate’s education, training, and experience. The minimum salary for the Director of Project Management position is $200,000 annually and the maximum salary is $220,000 annually. The compensation that is offered to a successful candidate will depend on the candidate’s skills, qualifications, and experience. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at and All your information will be kept confidential according to EEO guidelines. #LI-ES1 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description Hazen & Sawyer is seeking an Electrical Project Engineer for our Raleigh, NC office. Candidate will provide electrical engineering and design for water and wastewater facility projects, serving as lead electrical engineer when required. Candidate will support projects both local to and regional to the office, as well as supporting projects in other areas as requested by the firm. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK. Our electrical group has over 100 employees spread across more than 30 of our offices Key Responsibilities: • Power systems design, including medium and low voltage electrical power distribution, generator design, motor controls, VFDs, lighting systems, equipment layout and related activities at water and wastewater facilities, • Prepare project specifications and edit corporate electrical master specifications as needed to suit each project, • Serve as the lead electrical engineer on multiple concurrent projects. Ensure the work is performed in accordance with scope, schedule, and budget, • Perform site visits as needed from project conceptual design through construction, • Perform electrical design work in AutoCAD and/or Revit as required by the project, • Perform electrical power system studies in SKM and/or ETAP as required by the project, • Complete construction administration tasks including review of shop drawings, replies to requests for information, change order requests and similar tasks, • Perform factory witness testing of electrical equipment as required by the project, • Monitor and participate in the field testing and start-up of electrical systems, • Represent the electrical discipline in client project meetings, • Interaction with clients, contractors, and engineers from other disciplines, • Serve as a technical mentor for less experienced electrical staff, • Assist in business development activities such as proposal preparation, • Develop scope and fee documents for electrical portions of projects Fill the role of Project Manager for selected electrical projects. Required Qualifications: • Bachelor of Science in Electrical Engineering, • 5-14 years of relevant experience in heavy industrial electrical engineering and design, • Licensed as a registered professional engineer in at least one U.S. state., • Ability to be licensed in additional states at the request of the firm, • Experience with SKM or ETAP power system software, • Experience with AutoCAD and/or Revit BIM software, • Experience in Microsoft Office products, • Experience in the Water/Wastewater industry, • Experience with Bluebeam software and Bluebeam Studio, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description About Company: The Raleigh Housing Authority is seeking to add new members to the team who are eager to make a difference in their community. If you are looking for more than just a job, but a place where you belong, can grow, and be part of a solution to the housing affordability crisis, we have a place for you! Enjoy the satisfaction of helping families be housed successfully and giving them an opportunity to thrive. We value service, community, respect, and equity. We offer competitive compensation, generous benefits, a solid pension plan, and opportunities for career growth. Commit to something that matters and begin your journey with Raleigh Housing Authority! About the Role: The Construction Project Manager will play a pivotal role in overseeing and directing construction projects within the public administration sector. This position is responsible for ensuring that projects are completed on time, within budget, and to the required quality standards. The manager will coordinate with various stakeholders, including government officials, contractors, and community members, to facilitate effective communication and collaboration. Additionally, the role involves identifying potential risks and developing strategies to mitigate them, ensuring compliance with all relevant regulations and policies. Ultimately, the Construction Project Manager will contribute to the successful delivery of infrastructure projects that enhance community development and public service delivery. ESSENTIAL FUNCTIONS • Responsible for evaluating and presenting opportunities for capital improvement projects within the agency’s portfolio., • Develops scopes of work and project schedules ensuring successful projects are completed on time and within budget., • Prepares contracts, change orders and other correspondence., • Schedules contractors in practical order, ensuring work is efficiently completed during jobsite inspections., • Authorizes contract payments in accordance with the scope of work. Graduation from a four-year college with a degree in construction management is highly preferred. Consideration will also be given to candidates with a High School Diploma or its equivalent and four years of experience in construction work with responsibility for supervision and construction cost estimating, or an equivalent combination of education and experience that provides the required knowledge, skills and abilities. Practical knowledge of asbestos and lead based paint abatements is favorable as is multi-lingual proficiency. Familiarity with MS Office 365 is highly preferred. Certification, License, and Special Requirements: • Excels in both written and verbal communication skills., • Ability to collaborate and build relationships as you are in close contact with external and internal customers such as residents, colleagues, contractors and city inspectors., • Organizational skills are vital as you will simultaneously manage multiple priorities. The work is sedentary work and requires exerting up to 10 pounds of force occasionally to move objects. Additionally, the following physical abilities are required: manual dexterity, handling, hearing, mental acuity, reaching, speaking, talking, visual acuity in preparing/analyzing data/transcribe/using computer terminal/conducting extensive reading, visual acuity in operating motor vehicles, and walking. Working Conditions: Work is performed in a dynamic environment that requires sensitivity to change and responsiveness to changing goals, priorities, and needs. Works overtime as required

Job DescriptionDescription: Job description: Overview Avid Health delivers exceptional personalized in-home care services by hiring compassionate people who believe in taking care of our clients, fellow employees, and the communities we serve. We believe in Access, Value-Based Care, Innovation, and Dedication to Quality. Schedule We are looking for multiple different RN or LPNs in the Wake County area. Responsibilities • Administer medications and treatments as prescribed by physicians., • Evaluates and treats clients with appropriate level of skill according to client's needs under the supervision of an RN, Clinical Manager., • Monitor patient vital signs and report any changes to the healthcare team., • Attend school with client, • Verbal demonstrations of client rights and responsibilities, • Support case management by coordinating patient care plans and follow-up appointments., • Maintain accurate patient records and documentation in compliance with healthcare regulations., • Demonstrate proper use of equipment., • Ensure HIPAA regulations are adhered to. Benefits: • Competitive pay, paid weekly (with access to daily pay through TapCheck), • Flexible Schedule, • Paid Time Off, • Holiday Pay, • Shift Differential, • Ongoing training, • Employee referral bonus, • Performance based bonus, • Medical Insurance, with company contribution, • Dental Insurance, • Vision Insurance, • Life and AD&D Insurance, • Education: Graduate of an accredited school of nursing., • Licensure / Certification: Licensed practical nurse (LPN) who is licensed by the North Carolina Board of Nursing (NCBON). Must have a current, unencumbered license as an LPN, or an Advanced Practice Nurse. Must be in good standing in the applicable state of practice. Must maintain all state and federal compliance requirements for licensure and employment., • Travel: Travel is required for business purposes. Employees must have a valid driver’s license issued by the state in which they work and a satisfactory driving record., • Work Experience: Minimum of one year of home care experience. One additional year of nursing experience, preferably in a hospital, is required for conducting applicable training classes., • Other Hours of Work: Varies on a case-by-case basis. Full time is at least 30 hours a week from Saturday-Friday., • Skills and Additional Requirements:, • A specific understanding of geographical/cultural requirements of branch office is preferred., • Must be customer service oriented and prepared to liaise with patients, their families and other care providers., • Ability to use computerized systems., • Satisfactory verbal and written communication skills., • Ability to work well under pressure., • Bi-lingual preferred

Job Description Cooperidge Consulting Firm is seeking a Lead Electrical Engineer. This position offers the opportunity to take ownership of electrical system design from concept through construction while working on technically complex and historically significant projects. You will join a multi-disciplinary team, mentor junior engineers, and deliver practical, real-world solutions that directly support client needs. In this role, you will • Lead electrical design for new and renovated buildings, including lighting, lighting controls, and power distribution, • Serve as assistant project manager, supporting schedules, budgets, and deliverables, • Conduct field investigations, code analysis, and develop innovative design solutions, • Coordinate with multidisciplinary teams and engage directly with clients, • Ensure constructability in active, operational facilities, • Bachelor’s degree in Electrical Engineering or related field required, • 10–20 years of professional electrical engineering design experience (lighting, power, controls), • Licensed Professional Engineer (PE) required, • Experience with medium-voltage distribution preferred, • Familiarity with federal sector projects (UFC, UFGS, FAR) a plus, • RCDD certification beneficial, • Proficiency with AutoCAD, Revit, AGI32, SKM, or EasyPower required, • Strong leadership, project management, and client communication skills, • U.S. citizenship required (no dual citizenship) due to government project work, • Ability to perform fieldwork, including physical site visits, • Client relationships in NC, SC, Mid-Atlantic, or South-Central U.S. preferred, • Full-time roles offering overtime and weekend work opportunities, • Competitive hourly wages plus potential quarterly bonuses, • Comprehensive health, vision, and dental insurance plans, • Life insurance coverage, • 401(k) retirement plan with company matching contributions, • Paid time off including vacation, sick leave, and holidays, • Opportunities for career growth and advancement, • Employee discount programs and perks

Job Description Azurity Pharmaceuticals is a privately held, specialty pharmaceutical company that focuses on innovative products that meet the needs of underserved patients. As an industry leader in providing unique, accessible, and high-quality medications, Azurity leverages its integrated capabilities and vast partner network to continually expand its broad commercial product portfolio and robust late-stage pipeline. The company's patient-centric products span the cardiovascular, neurology, endocrinology, gastro-intestinal, institutional, and orphan markets, and have benefited millions of patients. For more information, visit . Azurity Pharmaceuticals is proud to be an inclusive workplace and an Equal Opportunity Employer. Azurity's success is attributable to our incredibly talented, dedicated team that focuses on benefiting the lives of patients by bringing the best science and commitment to quality into everything that we do. We seek highly motivated individuals with the dedication, integrity, and creative spirit needed to thrive in our organization. Brief team/department description: Our Digital team at Azurity is building new capabilities utilizing cutting-edge AI technology. We are looking for a dynamic and change-inspired analyst to help our organization achieve our goals. We are in a mission of transforming how data can inform key strategics decision making across our diverse portfolio. Within the US Forecasting & Predictive Analytics division at Azurity Pharmaceuticals you will have an opportunity to learn by practice and make a meaningful impact in bringing our medicine faster to patients across the US. You will be working with inspiring leaders in data engineering, data science and marketing to support us in our transformational journey in how we approach forecasting and analytics Come and join us! Principle Responsibilities: • Support data engineers and data scientists to develop, maintain and review forecasting models across our portfolio, • Conduct additional research and analytics to address any business question to help leaders to take more informed definition, • Generate forecasts that support decisions related to supply chain planning, inventory optimization and commercial strategy, • Act as project manager for our forecasting roadmap to keep us on track across the board, • Extraordinary Excel knowledge, • Excellent analytical, quantitative, and problem-solving skills, • Strong knowledge of data engineering or ML algorithm, • SQL / NoSQL coding experience, • Experience in project management, • Knowledge of IQVIA/Komodo data & patients forecasting modelling, • Knowledge of Palantir technology is a plus #LI-Hybrid Physical & Mental Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to sit for long periods of time, • While performing the duties of this job, the employee is frequently required to stand; walk; sit; talk and/or hear, • May occasionally climb stairs and/or ride elevators, • The employee must occasionally lift and/or move up to 25 pounds, • Employee must be able to manipulate keyboard, operate a telephone and hand-held devices, • Unlock Your Earning Potential: Join our team and be rewarded with a competitive compensation package, including an annual bonus based on company performance, that recognizes your exceptional talent., • Sales - In lieu of annual bonuses, we offer an Incentive compensation program that allows you to earn more - even over plan., • Comprehensive Health Coverage: We value your well-being and offer excellent medical, dental, vision, and prescription coverage to ensure you and your family are always taken care of., • Invest in Your Future: Our Retirement Savings Plan (401K) is designed to help you secure a comfortable retirement by matching dollar for dollar up to 5%., • Time Off That Counts: Take advantage of our generous time off policy, which offers up to 15 vacation days annually + rollover (up to 40 hours) as well as five sick/wellness days. For new employees, vacation accrual will be prorated based on your start date., • Meaningful Time with Your Loved Ones: We close between Christmas and New Year's to give you an extra week off to spend quality time with your family and recharge., • Enjoy the Holidays: Over the course of the year, Azurity recognizes 13 holidays., • Invest in Your Education: We support your professional growth with tuition reimbursement for undergraduate and graduate level courses or certifications., • Recognize and Be Recognized: Our Azurity High Five peer recognition platform allows you to celebrate your colleagues' accomplishments and receive recognition for your own outstanding work. The California Consumer Privacy Act regulates privacy rights and consumer protection for residents of California, United States. For details, click here. The General Data Protection Regulation (GDPR) sets guidelines for the collection and processing of personal information from individuals who live in the European Union (EU).

Job DescriptionDescriptionAlta is looking for a Senior Transportation Engineering Project Manager to join our growing practice in Raleigh, NC. This is a fantastic opportunity for someone who believes in the importance of active, multimodal, and sustainable transportation. In this role, you will work on the design of a variety of sustainable transportation projects and work on projects focused on making a positive impact on communities around North Carolina and across the country. Engineers who enjoy working closely with other disciplines will appreciate our Carolina team’s multi-disciplinary approach that encourages collaboration with our planners, landscape architects, graphics designers, outreach specialists, and data analysts. If you are looking to join an innovative organization and do work that connects people to places while advancing social justice, safety, and environmental resilience, apply with Alta today! About Alta Alta Planning + Design is a sustainable transportation company dedicated to creating active, healthy communities through planning, landscape architecture, engineering, and education/encouragement programs. Alta was founded in 1996 when communities were calling for safer streets for people walking and bicycling as the non-motorized transportation movement developed into a profession in the United States. We pioneered the field of active transportation, evolving our planning and design work into a visionary global practice that empowers people to live active, healthy lives and gets them to where they need to go. Our core values and work bring about positive change by creating places that are geared toward moving people rather than cars, connecting community members to daily needs and human experience, and empowering every person to live an active healthy life. As a global leader in mobility innovation for over 28 years with over 225 staff, we are dedicated to connecting people to places by working across disciplines and scale to address social justice, safety, and environmental resilience. Day to DayOur Senior Transportation Engineering Project Manager will be involved in helping foster livable communities in all parts of the country. Projects would range from natural surface trails to large arterial multi use paths; from Complete Streets to regional/multi-state bicycle and trail networks. Day to Day responsibilities for this role would include: • Managing a variety of transportation projects from design through construction. Drive the success of engineering projects and provide influence to the sustainable projects we work on. Manage project budgets., • Implementing best practices and process improvements to enhance project delivery efficiency and effectiveness., • Mentoring staff and contributing to internal professional development and training to technical engineering team., • Provide leadership and technical expertise to the Engineering team. In addition, collaborate with other disciplines (planning, landscape, data) as needed., • Prepare schedule, budgets, and scope of services for projects., • Workload balancing, • Support regional leader in business development. This position requires a combination of skills, experience and education including, but not limited to • 12+ years of experience as a Transportation Engineer in a consulting environment or public entity; 5+ years as a Project Manager; 3+ years managing staff, • Bachelor’s degree in Civil Engineering., • Professional Engineering (P.E.) license or TE (Traffic Engineer) licensure., • Experience in, and knowledge of, the field of active, non-motorized transportation., • Experience with DOT and Federally funded design projects is strongly desired, • Demonstrated understanding of and experience preparing Plans, Specifications and Estimates packages for roadway projects and a detailed understanding of project management principles, methods and techniques., • Ability to guide staff members and manage internal team expectations., • Exhibits strong initiative and ability to capitalize on opportunities to enhance Alta’s position in the marketplace., • Ability to manage competing priorities, multiple simultaneous projects involving cross-functional project teams within budgetary and schedule constraints., • Ability and willingness to travel., • Excellent professional ethics, leadership skills, accountability, and decision-making capabilities., • Good presentation skills., • Working knowledge of MS Excel, Word, MS Project or equivalent, AutoCAD or MicroStation., • Proficiency in an enterprise-wide resource planning and project management tool. There are a number of additional skills, experience, and education that would be beneficial to this position including, but not limited to:, • Master’s degree in Civil Engineering, or a related field of study., • Experience managing large projects for both private and public clients., • Experience using Deltek Vision. Our office strongly believes in a flexible culture that understands that beyond employees, we are people who may be parents, have hobbies, or need a hybrid schedule to mitigate long commutes. Our passion drives our dedication and commitment to do what we do. CompensationThe pay range for this job in Raleigh is $120,000-$170,000 annually. Placement within the range is based upon experience, skill-sets, and qualifications. BenefitsAlta offers comprehensive benefits to all full-time employees: • Medical: PPO or HSA medical plans, • Dental/Vision: PPO, • Life Insurance: Alta pays 100% of the premium for life and AD&D, equal to your base compensation, • 401(k): Alta provides a match up to 3%, • PTO: 21 days accrued annually to start, • Holidays: 11 total company paid holidays, • Paid Parental Leave/Short-Term Disability #LI-CL1

Job Description People who want to do a great job want to work for a company that values that dedication. We do. Snider Fleet Solutions is one of the largest commercial tire dealers and retread service providers in the nation. We are recognized as an industry leader for providing innovative outsourcing alternatives to both single truck customers and large multi-location trucking fleets. In addition to in-shop services, we also offer 24/7 emergency roadside assistance. You’ll be working with people who put everything they’ve got into their jobs. Because they love what they do and they love being on a winning team. We go the extra mile in everything we do. We Offer: • Paid Time Off (PTO) – personal, holiday, sick and vacation, • Career advancement opportunities, • 401(k) retirement planning, • Profit sharing, • Medical, • Dental, • Vision, • Employer-Paid Life, • Employer-Paid Short Term Disability As a Mechanical Service Writer, you will report to the Mechanical Service Manager. Your focus will be estimating heavy-duty truck and trailer mechanical jobs, including parts and labor. You will also bill service tickets, as demand requires. This entails significant time on the phone and computer communicating with vendors concerning parts pricing and availability and placing orders. You will also be in constant communication with mechanics on labor and time, and with customers on estimated job cost, lead time, and scheduling. This is a fast-paced environment; urgency and communication are critical. What You’ll Do on a Typical Day: • Estimating service tickets, • Ordering parts, • Processing and making returns, • Customer support, • Direct communication with technicians, customers, and vendors, • Adherence to all safety programs Our Ideal Candidate: Education or Experience: • Associate's Degree in Business or other related fields; four-year degree preferred and/or equivalent work experience., • Ability to pass background check and drug screen., • Must have strong organizational and time management skills, as well as close attention to detail., • Complete understanding of VMRS codes and TMC recommended practices., • Strong skills in Microsoft Office (Outlook, Word, Excel, & PowerPoint) and the ability to learn and operate other software (AS400, SAP, BTN, etc.), • Superior customer service and communication skills (both written and verbal)., • Ability to use all necessary office equipment, scanner, facsimile machines, calculators, postage machines, copiers, etc., • Understanding of invoicing and billing procedures., • Sensitivity to all confidential matters., • Reliable and dependable with self-initiative., • Ability to work effectively as a team member and independently with minimal supervision., • Ability to learn quickly and take on new responsibilities., • Proficient with 10-Key., • Ability to interact with all levels within the organization and client base., • Ability to understand and meet month-end, quarter-end, and year-end deadlines., • Ability to work overtime based on branch or department needs., • Understanding of industry standards and practices in accomplishing these standards., • Ability to multi-task, work effectively under pressure and time constraints., • Analytical skills, including research, ability to interpret data, and ability to analyze information., • Ability to train and coach in administrative practices., • Familiarity with Paylocity is a plus.