Electrical engineer jobs in Aurora, ColoradoCreate job alerts

Job Description Key Responsibilities • Maintain, repair, and install HVAC and refrigeration equipment, • Troubleshoot boilers, chillers, pumps, compressors, fans, cooling towers, and heat exchangers, • Perform preventative maintenance and seasonal startup/shutdown procedures, • Monitor equipment performance, temperatures, pressures, and amperage readings, • Maintain alignment of motors, pumps, compressors, and V-belt systems, • Clean condenser tubes, cooling towers, strainers, and related equipment, • Operate steam and hot water boilers and associated systems, • Read and interpret schematics, control diagrams, blueprints, and technical manuals, • Perform brazing, soldering, oxyacetylene work, and welding as needed, • Complete work orders and maintain maintenance records and reports, • Respond to emergency service calls and participate in on-call rotation, • Monitor and respond to building automation system alarms Why Candidates Are Interested in This Role • Stable long-term employment environment, • Diverse work across commercial HVAC and mechanical systems, • Independent role with minimal supervision, • On-call and overtime opportunities available, • Work with large-scale boilers, chillers, cooling towers, compressors, pumps, and control systems, • Exposure to advanced building automation systems, • Opportunity to troubleshoot and maintain complex facility infrastructure, • Strong team-oriented maintenance environment Position Overview Seeking an experienced HVAC Technician to install, maintain, troubleshoot, and repair commercial heating, cooling, refrigeration, and mechanical systems within a large facilities environment. This role supports preventative maintenance, emergency repairs, seasonal system changeovers, and daily mechanical operations. Required Qualifications • High school diploma or GED, • Journeyman-level HVAC experience with a minimum of 10 years in the field, • EPA Universal Refrigeration Certification, • Strong troubleshooting and diagnostics experience with commercial HVAC systems, • Knowledge of OSHA and EPA regulations and safety procedures, • Valid Colorado Driver’s License, • Ability to lift up to 100 lbs and pass pre-employment physical screening Preferred Qualifications • Stationary Engineer Certification, • Boiler Operator Class A or B License, • Steamfitter Journeyman License, • Heating and Ventilation Journeyman License, • Refrigeration Journeyman License, • Experience with building automation systems and controls Work Environment • Indoor and outdoor commercial facilities environment, • Exposure to heat, electrical hazards, mechanical equipment, noise, vibration, humidity, fumes, and varying weather conditions, • Work may include rooftops, mechanical rooms, confined spaces, elevated work areas, and emergency response situations, • Fast-paced environment with moderate to high stress levels and unexpected interruptions Physical Requirements • Frequent standing, walking, climbing, crouching, bending, reaching, and repetitive hand movement, • Ability to push, pull, carry, and lift up to 100 lbs, • Ability to work in noisy, hot, cold, and confined environments, • Must be able to wear OSHA-approved respirators, • Strong close vision, distance vision, peripheral vision, depth perception, and focus adjustment required

Job DescriptionSite Installation Engineer – Vanderlande Logistics LLCPosition Summary Vanderlande Logistics LLC is seeking a skilled and motivated Site Installation Engineer to support the installation, commissioning, and optimization of our material handling and baggage handling systems. This role plays a key part in ensuring successful system deployment, technical accuracy, and seamless coordination with internal teams, contractors, and airport/warehouse partners. The Site Installation Engineer will assist with on‑site installation activities, system testing, troubleshooting, documentation, and technical support throughout the project lifecycle. This position requires strong technical aptitude, attention to detail, and the ability to work collaboratively in a fast‑paced environment. Essential Functions (Job Duties & Responsibilities) Support installation, testing, and commissioning of material handling and baggage handling systems. Review and interpret engineering drawings, schematics, and technical documentation. Assist with system troubleshooting, diagnostics, and corrective actions during installation and startup. Coordinate with contractors, vendors, and internal teams to ensure installation activities meet project requirements. Monitor installation progress and report deviations, risks, or delays to project leadership. Ensure compliance with safety standards, site protocols, and Vanderlande installation procedures. Document installation activities, test results, and system performance data. Support system handover activities, including punch‑list completion and final acceptance testing. Provide technical guidance to site personnel and assist with training when required. Maintain accurate records of materials, tools, and equipment used during installation. Knowledge, Skills & Abilities (Competencies) Strong technical understanding of mechanical and electrical systems. Ability to read and interpret engineering drawings and schematics. Excellent problem‑solving and troubleshooting skills. Strong communication and customer‑facing skills. Ability to work independently and collaboratively in a dynamic environment. Familiarity with conveyor systems, industrial equipment, or material handling systems preferred. Required Education & Experience Technical Degree, Engineering Degree, or equivalent experience. 1–3 years of experience in installation, commissioning, or maintenance of industrial or mechanical systems. Experience with material handling, conveyor systems, or baggage handling systems preferred. Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint). Strong verbal and written communication skills. Preferred Qualifications Experience working in airport, warehouse, or industrial environments. Experience supporting large‑scale installation or commissioning projects. Familiarity with PLCs or automated control systems (preferred but not required). Why Join Vanderlande? Benefits start on day one. The starting pay range for this position is $64,000. The actual wage offered may be lower or higher depending on budget and candidate experience, knowledge, skills, qualifications, and premium geographic location. Professional development and tuition reimbursement $1,000 Sign‑On Bonus Matching 401K Equal opportunity workplace that embraces and promotes ownership culture, empowerment, open communication, diversity, and collaboration 18 days of paid PTO Professional development opportunities and tuition reimbursement Discounts on flights, hotels, amusement parks, movies, and so much more Design your future with us! Apply today and join Team Vanderlande.

Job DescriptionSalary: $32- $47/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense, and space OEMs, Primes, and Tier I suppliers. We specialize in producing high-tolerance, complex geometry components machined from standard and exotic metals. Our team supports major aerospace manufacturersincluding Boeing, Lockheed Martin, and Northrop Grummanby delivering precision parts for mission-critical civilian and defense programs. The CNC Maintenance Engineer is responsible for the installation, maintenance, troubleshooting, and repair of Computer Numerical Control (CNC) machinery and associated plant equipment to ensure maximum uptime and operational efficiency. The role requires a blend of mechanical, electrical, hydraulic, and pneumatic expertise. Job Summary The CNC Maintenance Engineer's primary responsibility is to minimize machine downtime by performing preventative and corrective maintenance on all CNC equipment (lathes, mills, grinders, etc.) and supporting facility maintenance. This role requires the ability to diagnose complex issues using technical manuals and diagnostic tools and implement effective, lasting repairs. Key Responsibilities • Preventative Maintenance: Conduct routine inspections and perform scheduled preventative maintenance (PM) on machinery to prevent failures before they occur. Maintain accurate maintenance logs and service records., • Troubleshooting and Repair: Diagnose and repair mechanical, electrical, hydraulic, and pneumatic systems issues., • Installation and Calibration: Assist with the installation, relocation, leveling, and alignment of new and existing machinery. Perform calibrations to ensure machines operate to exact specifications and tolerances., • Documentation and Inventory: Read and interpret technical manuals, electrical schematics, blueprints, and wiring diagrams. Monitor and maintain spare parts inventory, placing orders as needed., • Safety and Compliance: Adhere to all safety procedures and regulations, including Lockout/Tagout, personal protective equipment (PPE) protocols, and electrical safety standards., • Collaboration: Work closely with the production and engineering teams to prioritize repairs, improve processes, and provide technical support or training to machine operators as needed., • General Facility Maintenance: Perform general building and grounds maintenance as required., • Supporting lean manufacturing projects as needed. Qualifications and Skills • 1-5+ years of experience in CNC machine maintenance within a manufacturing or machine shop environment is typically required., • Strong mechanical aptitude and troubleshooting skills., • Proficiency with electrical test equipment (e.g., multimeters) and experience working with 480V three-phase power, VFDs, and PLCs., • Working knowledge of hydraulic and pneumatic systems., • Familiarity with various machine tool controls (Fanuc, Haas, Okuma, etc.)., • Ability to read and interpret technical documents, schematics, and blueprints., • Soft Skills: Excellent problem-solving, critical thinking, and communication skills., • Physical Requirements: Ability to lift heavy objects, stand for long periods, and work in various physical conditions (crouching, climbing, etc.)., • Certifications: High school diploma or GED required; technical training or certification in industrial maintenance, mechanics, or mechatronics is a significant plus. We offer comprehensive benefits for full-time employees including: • PTO, • 10 paid holidays, • Medical, Dental, Vision, Short- and Long-term disability insurance, • 401K match, • Long and short-term incentive plans, • Benefits start 1st of the month after date of hire To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen, or lawful permanent resident of the U.S. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr

Job Description Senior Power Electronics Engineer - Denver, Colorado | On-site Opportunity Summary Join a venture-backed aerospace company developing advanced spacecraft platforms for future commercial and government missions. As the company builds flight-ready hardware, this role will lead the electrical power architecture that distributes, protects, and manages energy across every spacecraft subsystem. This is a hands-on engineering position focused on power electronics, battery systems, electrical distribution, actuator drive electronics, and hardware validation. You'll own the spacecraft power system from battery management through power conversion, distribution, monitoring, and fault protection while working alongside firmware, mechanical, and systems engineering teams. About Us We are an early-stage aerospace company developing integrated spacecraft technologies that combine advanced hardware, embedded software, and precision engineering. Engineers have broad ownership and the opportunity to influence products from initial architecture through flight qualification. Job Duties • Own spacecraft electrical power architecture from battery through power distribution., • Design battery management systems and electrical protection circuits., • Develop power conversion hardware including DC-DC converters and switching electronics., • Design actuator drive electronics and high-current switching circuits., • Implement fault protection, current limiting, and electrical redundancy strategies., • Develop power telemetry and health monitoring systems., • Create schematics, PCB layouts, manufacturing documentation, and design reviews., • Perform board bring-up, validation, troubleshooting, and environmental testing., • Analyze electrical performance using laboratory instrumentation., • Collaborate with firmware, systems, and mechanical engineering teams throughout product development. Qualifications • Bachelor's degree in Electrical Engineering or equivalent experience., • 5+ years designing power electronics or electrical power systems., • Experience with DC-DC converters, switching power supplies, and power distribution., • Experience developing lithium-ion battery systems and battery management., • Understanding of thermal management and power system reliability., • Experience using Altium Designer, KiCad, or similar PCB tools., • Strong hardware debugging experience using oscilloscopes, electronic loads, and power supplies. Preferred Experience • Aerospace, defense, automotive, or other mission-critical electronics., • Motor controllers, H-bridges, or actuator drive electronics., • Radiation-aware or high-reliability electrical design., • Thermal vacuum or harsh environment hardware., • Embedded power telemetry over I2C, SMBus, or similar protocols., • Basic firmware or scripting to support hardware validation. Why Join Us • Own a critical portion of the spacecraft electrical architecture., • Work on flight hardware from concept through qualification., • Early-stage environment with significant technical ownership., • Competitive equity opportunity., • Medical, dental, and vision coverage., • Paid parental leave., • Paid vacation and company holidays. Compensation Details $130,000 - $170,000 #LI-AV

Job Description Senior GNC Simulation Engineer - Build the Flight Simulation Environment for Next-Generation Spacecraft Denver, Colorado | On-site Opportunity Summary Join a venture-backed aerospace company developing advanced spacecraft platforms designed to support the next generation of autonomous in-space operations. As the company progresses from prototype development toward flight-qualified systems, this role will lead the development of the simulation and verification environment used to validate guidance, navigation, and control performance before hardware reaches orbit. As a Senior GNC Simulation Engineer, you will own the simulation infrastructure supporting flight software development, vehicle dynamics, and mission verification. You'll build high-fidelity simulation environments that accurately model spacecraft physics, sensors, actuators, and onboard software while enabling rapid testing through hardware-in-the-loop, software-in-the-loop, and Monte Carlo analysis. Working closely with GNC, embedded software, avionics, and systems engineering teams, you'll help ensure simulation results translate directly to flight performance. About Us We are an early-stage aerospace company developing advanced spacecraft technologies for future commercial and government space missions. Our multidisciplinary engineering team combines flight software, avionics, autonomy, and mechanical design to solve challenging problems in spacecraft mobility and in-space operations. Engineers have broad technical ownership and play an active role in moving systems from concept through flight validation. Job Duties • Design, develop, and maintain high-fidelity simulation environments supporting spacecraft guidance, navigation, and control development., • Build 6DOF physics models representing spacecraft dynamics, orbital motion, environmental effects, and vehicle interactions., • Develop simulation infrastructure that integrates directly with production flight software., • Design and maintain hardware-in-the-loop and software-in-the-loop verification environments., • Develop sensor, actuator, communication, and subsystem models that accurately represent flight hardware behavior., • Build Monte Carlo analysis frameworks for performance evaluation across thousands of mission scenarios., • Develop simulation configuration, automation, logging, visualization, and telemetry tools., • Validate simulation fidelity through comparison with hardware testing and flight data., • Support regression testing and continuous verification of guidance, navigation, and control algorithms., • Reproduce flight anomalies and investigate discrepancies between simulation and hardware performance., • Collaborate closely with GNC, embedded software, avionics, perception, and systems engineering teams to improve simulation accuracy and software reliability., • Participate in architecture discussions, design reviews, and verification planning throughout product development. Qualifications • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Computer Science, Physics, Applied Mathematics, or a related technical discipline., • 5+ years developing simulation software for aerospace, robotics, autonomous systems, or other dynamic platforms., • Strong software development experience using modern C++ and Python., • Experience developing high-fidelity dynamic simulation environments., • Strong understanding of rigid-body dynamics, numerical integration, orbital mechanics, and control systems., • Experience integrating software into simulation or hardware verification environments., • Familiarity with collaborative software development practices and version control systems. Preferred Experience • High-fidelity 6DOF spacecraft or aircraft simulation., • Hardware-in-the-loop and software-in-the-loop testing., • Monte Carlo simulation and statistical performance analysis., • Real-time or embedded software development., • Flight software integration and verification., • Sensor and actuator modeling., • Numerical integration methods and nonlinear dynamic systems., • Distributed software architectures or multi-rate simulation frameworks., • Data visualization, telemetry analysis, or simulation dashboards., • Experience supporting spacecraft, autonomous vehicles, robotics, UAVs, or other mission-critical autonomous systems. Why Join Us • Own the simulation platform that validates every flight-critical GNC capability., • Build the verification infrastructure supporting next-generation autonomous spacecraft., • Work alongside a highly collaborative multidisciplinary engineering team., • Significant technical ownership with direct influence on product architecture and development processes., • Competitive salary and meaningful early-stage equity opportunity., • Comprehensive medical, dental, and vision coverage., • Life and disability insurance., • Paid parental leave., • Three weeks of paid vacation plus company holidays. Compensation Details $120,000 - $165,000

Job Description One Tech Engineering is searching for an Electrical Engineer for a position located in Denver, Colorado. The Electrical Engineer will deploy and commission automated field devices, including capacitor banks, protection devices, and other distribution automation equipment. The candidate must be a US citizen or hold a green card. The candidate will have a Bachelor’s of Science in Electrical or Computer Engineering and 2-3 years of related experience. Electrical Engineer Responsibilities: • Perform system studies and develop device settings to support reliable and efficient distribution system operation., • Coordinate with engineering, design, and field personnel throughout project planning, installation, testing, and commissioning., • Maintain and update automated field device databases to ensure accurate system records., • Integrate field devices into Advanced Distribution Management Systems (ADMS) and verify proper communication and functionality., • Assess advanced metering infrastructure (AMI) capabilities and support the evaluation of advanced meter functionalities., • Provide technical support and troubleshooting assistance to field personnel during installation, testing, and maintenance activities., • Monitor automated field device performance and conduct meter functionality testing to ensure system reliability and compliance., • Support continuous improvement initiatives by identifying opportunities to enhance automation, metering, and distribution system performance. Requirements of the Electrical Engineer: • Bachelor's degree in Electrical Engineering or Computer Engineering., • 2-3 years of related experience, power systems engineering preferred., • Hands-on experience with Eaton Cooper capacitor bank controllers, SEL protection devices, and Advanced Distribution Management Systems (ADMS)., • Experience with Python and SQL programming is preferred., • Strong verbal and written communication skills.

Job DescriptionXcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! This is a full-time, onsite role based at our headquarters in Denver, CO. As a Pulsed Power Simulation & Modeling Engineer, you will apply your skills to creating models of, and simulating cutting-edge pulsed power electrical and mechanical systems. This role encompasses the use of multi-physics and electromagnetics solvers to aid in the design and optimization of associated systems and components. We are looking for our Pulsed Power Simulation & Modeling Engineer to apply their technical expertise, problem solving skills, and dedication to quality to positively impact the future of energy! Responsibilities • Work with pulsed power design engineers to generate models of systems and components, • Work with a multidisciplinary team to create, optimize and validate models of complex physical processes and phenomena., • Aid in the design of experiments for validation of models against real-world data, • Work with design engineers to enhance the workflow from concept to final print based upon optimizations in simulation. Qualifications, • Education: B.S. or M.S.in Mechanical or Electrical Engineering, • Experience: 2+ years of experience with field solver/particle-in-cell/circuit simulation codes, • Strong communication skills across disciplines and departments, • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee of granted asylum Desired, • Proficiency in COMSOL, CST and/or LT-SPICE, • Proficiency in solid-modeling software, e.g. SolidWorks or NX, • Strong knowledge of electromagnetic field principles, • Mechanical design skills – knowledge of GD&T principles a plus, • Proficiency with Python and/or MATLAB. Experience with VBA and Java a plus Candidates may be considered for other positions at Xcimer Energy, and our actual base salary will be determined on an individual basis and may vary based on job-related knowledge and skills, education, and experience. The range is published in accordance with Colorado Equal Pay for Equal Work Act and California Equal Pay Act.Equal Employment OpportunityXcimer Energy is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force. Xcimer Energy hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork, in which all employees recognize and appreciate the diversity of individual team members. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, gender, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Xcimer Energy will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws. For more information on “EEO Is the Law,” please see here and here. BenefitsXcimer offers a comprehensive benefits package designed to support employee health, well-being, and long-term success. Benefits include medical, dental, and vision coverage; basic and supplemental life insurance; short- and long-term disability; paid parental leave for employees at the time of birth or adoption; and a 401(k) with a company match of up to 6%. Eligible employees also receive equity, allowing them to share in the company’s long-term success.Xcimer operates under a flexible Paid Time Off (ATO) approach. Rather than a fixed number of vacation days, employees are trusted to take the time they need to rest and recharge while meeting the expectations of their role and team. In addition, employees receive paid sick time, 13 company-paid holidays, and an annual paid company shutdown. Benefits are available to regular employees, including part-time and fixed-term roles, as well as interns, with eligibility varying by benefit. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionXcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! This is a full-time, onsite role based at our headquarters in Denver, CO. As a Principal Systems Engineer, you will be a thought leader in Xcimer influencing and educating technical leads to capture, organize, and track the integrated technical baseline for our IFE Programs, and our Defense Programs. The successful candidate will perform leading and supporting roles in establishing and maintaining bidirectional traceability across our requirements, architecture, documentation, and analysis products. The candidate will define and maintain infrastructure, define relationships between internal and external interfaces, and communicate system-level use cases and relationships to a diverse group of stakeholders. The candidate will work with team leads across the organization to craft the key framework and documents needed to define, design, build, test, and activate our facilities and systems. We are looking for engineers to apply their technical expertise, problem solving skills, and dedication to quality to positively impact the future of energy!Responsibilities • Provide technical guidance and oversight to ensure the successful development and implementation of system functionality • Implement engineering knowledge management strategies and tools to minimize process overhead for engineering teams • Architect scalable verification and validation frameworks across data dashboards, engineering tools, and Atlassian suite (Confluence & Jira) • Implement the processes, traceability, and documentation necessary to support defense programs • Collaborate with program teams, including new development and legacy systems, to identify opportunities for integration and support the development of updated releases • Carry out systems engineering activities in accordance with tailored system engineering standards and practices • Drive and coordinate technical decision making, • Conduct risk assessments to ensure risk mitigation plans are developed and implemented, • Act as the negotiator between multiple teams to make sure the holistic system is optimized, • Develop strategies, approaches for specialty engineering (operability, reliability, maintainability, supportability) integration, analysis and verificationQualifications • Minimum of a B.S. degree in engineering or other technical field (e.g. mechanical, electrical, chemical, etc.) • 15+ years of Systems Engineering/Software Engineering experience, • Proven experience leading cross-functional teams and collaborating with stakeholders to drive technical innovation and growth • Proven experience owning the integrated technical baseline for complex systems through the full Systems Engineering Lifecycle • Experience working on development programs for large, complex, integrated systems or facilities – preferably from the fusion/energy, aerospace, or space and defense industry • Strong technical experience in simulation, software, and data analysis, with an understanding of industry trends and emerging technologies • Fluent with Atlassian suite tools (Confluence, Jira), • Experience with rapid technology development, integration, and testing, • Great communication skills, ability to work effectively in teams, demonstrated execution and coordination skills • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee of granted asylumDesired, • Experience with defining, designing, and activating large facilities for assembly, integration, and testing for large complex systems • Experience with high energy laser systems, optics or fusion energy systems, • Project management skills including labor estimating and schedule management, • Demonstrated configuration management experienceCandidates may be considered for other positions at Xcimer Energy, and our actual base salary will be determined on an individual basis and may vary based on job-related knowledge and skills, education, and experience. The range is published in accordance with Colorado Equal Pay for Equal Work Act and California Equal Pay Act.Equal Employment OpportunityXcimer Energy is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force. Xcimer Energy hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork, in which all employees recognize and appreciate the diversity of individual team members. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, gender, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Xcimer Energy will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws. For more information on “EEO Is the Law,” please see here and here. BenefitsXcimer offers a comprehensive benefits package designed to support employee health, well-being, and long-term success. Benefits include medical, dental, and vision coverage; basic and supplemental life insurance; short- and long-term disability; paid parental leave for employees at the time of birth or adoption; and a 401(k) with a company match of up to 6%. Eligible employees also receive equity, allowing them to share in the company’s long-term success.Xcimer operates under a flexible Paid Time Off (ATO) approach. Rather than a fixed number of vacation days, employees are trusted to take the time they need to rest and recharge while meeting the expectations of their role and team. In addition, employees receive paid sick time, 13 company-paid holidays, and an annual paid company shutdown. Benefits are available to regular employees, including part-time and fixed-term roles, as well as interns, with eligibility varying by benefit. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: Join our team! Together we’ll design telecommunications cabling distribution systems for advanced buildings. Swanson Rink's growing Technology team designs the telecommunications infrastructure that supports low voltage IP based equipment, connections and technology throughout a building, or campus environment. These systems support video surveillance, access control, audio video, wireless and network infrastructures. We focus on airports, data centers and other complex buildings while working with some of the most advanced clients in the industry. If you are an expert in this field, we want to talk to you! Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, training allowances, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits, • Stock purchase plan, • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: • Design telecommunications cable infrastructure to support IP based connections including Voice, Data, Wi-Fi, Audio Visual, CCTV, Access Control, and Intrusion Detection. This includes detailed internal building layouts, as well as exterior campus connectivity., • Design electronic security systems including Video Surveillance and Analytics, Access Control, and Intrusion Detection., • Design specifications, configuration, and commissioning of large scale local, integrated, and network-based systems., • Regularly interact with clients, engineers, and architects, as well as construction teams to proactively solve problems., • Provide construction oversite, including specification and contract drawing compliance, conduct site visits and formulate construction observation reports., • Stay up to date on the latest technology and trends in the industry.Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Engineering, Architecture, or a related field, from four-year college or university (preferred)., • Consulting engineering experience with 5+ years of telecommunication systems design experience., • Knowledgeable in industry standards including TIA/EIA, BICSI and IEEE., • Must be available to travel occasionally., • Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts., • Must be authorized to work in the United States. What Puts You a Step Ahead: • Registration as a Professional Engineer, • BICSI Certified Installer, • BICSI RCDD, • BICSI DCDC Salary range of $90,000 - $130,000 and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Job Description UTILITY BUILDING ENGINEER JOB SUMMARY: The Utility Engineer is responsible for the appearance and performance of general maintenance of the property structure, facilities & building systems and ensuring the building(s) are maintained and operating in a manner consistent with efficiency and cost effectiveness. This includes office buildings, retail buildings and common areas. DUTIES AND RESPONSIBILITIES: • Assist bldg engineers with tenant requests on repair issues including electrical, lighting, plumbing, HVAC, irrigation, windows, walls, flooring and roofing., • Complete assigned work orders for corrective repair daily, review, and schedule work orders accordingly. Return completed work orders to Chief engineer., • Assist bldg engineers with preventive maintenance tasks as it relates to the respective building and its equipment., • Assist bldg engineers with exterior as well as interior physical inspection of the buildings – reporting deficiencies., • Assist bldg engineers with Replace lamps and or ballasts in common areas and tenant spaces, common corridors, stairwells, restrooms, janitorial, mechanical, and electrical rooms., • Assist bldg engineers with Repair and install plumbing fixtures, such as drinking fountains, faucets, toilets, urinals, water heaters, • Touch up painting as needed in all common areas., • Replace damaged or broken ceiling tiles as needed., • Assist bldg engineers with Inspecting, maintaining, and repair as needed all access doors into the buildings insuring proper use and function., • Replace door handles/locks at tenant doors as needed., • Install building directory signage as needed., • Order/pick up supplies and material as needed that may be used on a regular basis, • Maintain inventory and organization of engineering shop and building plans., • Perform inspections on vacancy spaces, for cleanliness and ensuring they are “Market Ready.”, • Respond in person to tenant with respect to tenant’s work order. Maintains records of customer interactions and transactions, recording details including actions taken., • Prioritizes and manages daily workload to ensure successful completion., • Responsible for the timely and accurate completion of assigned maintenance work orders and preventive maintenance tasks for multiple properties and reporting to chief engineer. DESIRED SKILLS AND EXPERIENCE: • Experience using hand and power tools, • Experience operating computer systems for service tickets, inventory, and maintenance records., • Ability to communicate in a positive and professional manner with tenants, employees and vendors., • Available for emergency call-in, possible weekend and overtime shifts., • Ability to exercise good judgment., • Good customer service skills., • Team player attitude. QUALIFICATIONS: • Two years minimum hands-on experience preferred, • Valid driver’s license and clean driving record required, • High school diploma or equivalent EFFORTS: • Sitting: 50%, • Walking/Standing: 50%, • Bending/stooping: working on projects below eye level, • Reaching/touching: reach with hands and arms, including raising arms above head to work on projects; use hands to finger, handle or feel objects, tools or controls., • Lifting/carrying: up to 50 lbs., • Climbing ladders or stairs, • Pushing/pulling carts or equipment on wheels, • Must be capable of working extended hour days when job/business needs demand, • Will need to be available for 24x7 on-call rotation WORKING CONDITIONS: • Exposure to high noise levels, • Exposure to heat and cold, • Exposure to electrical hazards, • Working at heights, • Working in enclosed spaces BENEFITS: • Health Insurance • Paid Holidays • PTO • 401K

Job DescriptionJob Title: Project Engineer Location: Denver, Colorado Type: 12 month Contract Compensation: $37.00 - $40.00 hourly Contractor Work Model: Hybrid Hours: Onsite 3 days per week at various plant locations, potentially up to 5 days a week if needed. System One is currently seeking a Project Engineer on a 12 month contract position located in Denver, CO. Project Engineer Responsibilities: • Plant Fleet based engineering role to support energy supply projects group to help manage capital projects at the power plants across the region., • Responsible for managing all emergent capital projects at the plant as well as supporting larger base and major capital projects., • Support reliability engineering in helping develop scopes and justifications for projects and putting those through the emergent capital request system/process and would be responsible for managing all the projects., • Could be responsible for upwards of 20 small projects going on at one time in addition to supporting some of the larger base capital projects., • Work with operations and reliability engineering to learn about plant systems and how they operate., • In addition to planning out future work to keep the plants reliable., • Attend morning POD meetings, collaborating with operations and reliability personnel throughout the day, overseeing contractors performing/executing on the projects in the field and would be responsible for all the administrative project paperwork, such as developing scopes of work, technical specifications, helping get quotes for equipment, bidding out if necessary and coordinating material deliveries and installation with the plant as well. Project Engineer Requirements:, • Proficient with Microsoft Office suite (Outlook, Teams, SharePoint), • Ability to multi-task and juggle several tasks without sacrificing quality, takes initiative, teamwork, interpersonal / communication skills., • Experience with cradle to grave Project management., • Prior experience working in manufacturing / plant environment like a power plant., • Taken the FE (fundamentals in engineering) exam or would like to (preferred not required), • Previous experience with project management and project plan development, charters, managing budgets, good with managing money, etc., • Requires a bachelors degree in engineering, no specific discipline, as long as its related to work performed at the plant (mechanical/electrical/civil). System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 #LI-NP1 Ref: #192-Precision San Antonio

Job Description Electrical Engineer Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The Electrical Engineer builds on foundational experience to take independent ownership of portions of project design, documentation, and coordination. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role is trusted to perform electrical engineering tasks with minimal supervision and supports project delivery from concept through construction. Electrical Engineer serves as a technical contributor and emerging mentor, contributing to electrical calculations, code research, QAQC, and coordination across disciplines. Individuals in this role are expected to deepen their technical knowledge, begin supporting client interaction, and develop the critical thinking required for future engineering leadership roles. Essential Functions: • Lead design development and electrical calculations for assigned electrical systems across schematic, design development, and construction document phases., • Independently perform lighting and power load calculations, feeder sizing, short circuit studies, and NEC compliance checks with minimal input., • Prepare technical documentation for electrical systems, including system descriptions, Division 26 specifications, equipment schedules, and redline markups., • Develop and review electrical system layouts in Revit—including power, lighting, fire alarm, and single-line diagrams—in coordination with architectural and structural backgrounds., • Coordinate electrical design with internal disciplines (mechanical, plumbing, lighting, sustainability) and external consultants (e.g., low voltage, civil) to resolve design conflicts., • Review and respond to electrical RFIs and submittals, with support from senior engineers as needed., • Perform field verification for electrical conditions, assist with punch walks, and participate in electrical construction observation visits., • Participate in early-phase project design strategy discussions and support electrical discipline leads with technical input., • Engage in internal QAQC processes and perform peer reviews of electrical drawings and documentation for code compliance and drafting consistency., • Begin mentoring electrical designers and interns on software use, modeling best practices, documentation standards, and calculation basics., • Participate in internal and external project meetings, and support the preparation of agendas, meeting minutes, and follow-up documentation with a focus on electrical scope., • Track and manage hours on assigned electrical work and assist in project planning discussions regarding scope and resource allocation. Requirements • Bachelor’s degree in electrical engineering or equivalent required., • P.E. licensure required., • 5+ years in the AEC Industry required along with previous experience developing electrical solutions for Data Centers - required., • An understanding of the financial status of projects as they progress, development of cost budgets for projects, value of client relationships and be able to deliver projects with a focus on the quality is preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills required., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description Title: Mechanical Engineer Client: Architecture and Engineering Firm Duration: Full-Time (Permanent) Location: Denver, CO Work Model: Hybrid Role Summary Senior-level Mechanical Engineer supporting full building systems design across diverse public-sector and institutional projects. Work in integrated teams with architects, designers, and MEP engineers to deliver energy-efficient, code-compliant, and client-focused solutions. Strong emphasis on leadership, mentorship, and end-to-end project delivery. Key Responsibilities • Lead mechanical systems design including HVAC, plumbing, fire protection, and building automation, • Manage projects across varying sizes, timelines, and client requirements, • Act as primary client contact for mechanical scope and coordination, • Collaborate with architects, electrical engineers, contractors, and consultants, • Perform existing system assessments and design retrofit solutions, • Improve building energy performance and operational efficiency, • Conduct detailed code analysis and document quality reviews, • Prepare and organize construction documents and contracts, • Coordinate multidisciplinary design efforts for integrated solutions, • Mentor junior engineers and support team development, • Manage schedules and prioritize deliverables from concept through completion Industries / Project Types • K-12 Education, • Government & Civic, • Higher Education, • Healthcare Facilities Required Skills & Qualifications • 5–10 years of mechanical engineering design experience, • Bachelor’s degree from an accredited institution, • Strong knowledge of building codes, standards, and specifications, • Experience across all phases of construction projects, • Proven leadership, communication, and organizational skills, • Ability to work collaboratively in a multidisciplinary environment, • Comfortable with client interaction and on-site responsibilities Preferred • Registered Professional Engineer (PE), • Prior experience with K-12, government, or healthcare clients, • Experience mentoring and leading engineering teams Benefits & Perks • Hybrid work schedule, • Health Insurance + HSA, • Dental Insurance, • Short- & Long-Term Disability, • Life Insurance, • 401(k), • Flexible Spending Account (FSA), • Transportation reimbursement & stipend, • Dependent Care Assistance, • FMLA & Parental Leave, • Community Day (8 paid hours annually) #ZR Company DescriptionAs a leading contract, contract-to-hire and professional placement firm, Three Point Solution understands the importance of aligning our client with the right resource at the right time. We are committed to the highest caliber of service that will benefit our clients, candidates and employees. Unlike large, corporate style recruiting firms, we commit to individualized attention that uniquely positions us to bridge the communication gap between recruiter, employer and candidate. Our goal is to cultivate and maintain true partnerships with our clients and candidates.As a leading contract, contract-to-hire and professional placement firm, Three Point Solution understands the importance of aligning our client with the right resource at the right time. We are committed to the highest caliber of service that will benefit our clients, candidates and employees. Unlike large, corporate style recruiting firms, we commit to individualized attention that uniquely positions us to bridge the communication gap between recruiter, employer and candidate. Our goal is to cultivate and maintain true partnerships with our clients and candidates.

Job Description Today, everything we send to space is constrained by what fits inside a rocket fairing. That's a fundamental bottleneck to building more capable spacecraft. Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles: modular spacecraft components that rendezvous, dock, and latch to assemble bigger and more powerful spacecraft than anything that can be folded to fit into a rocket. We're a small team based in Golden, Colorado, executing on a clear path from flight demonstration to our first operational systems. Our work spans hardware, software, and systems engineering. We are looking for the best people in the world who want to build the next generation of advanced spacecraft. Responsibilities & Ownership • Develop test plans, procedures, and readiness documentation for component, subsystem, and system-level testing, with clear traceability to requirements., • Build and maintain test infrastructure — fixtures, data acquisition, automation, and the tooling that makes campaigns repeatable., • Execute functional, environmental, and performance tests; collect and analyze data; and document results against pass/fail criteria., • Lead anomaly resolution and root-cause investigations, and drive corrective actions to closure., • Support assembly and integration of our electromagnetic tiles and multi-tile spacecraft, working shoulder-to-shoulder with design, manufacturing, and avionics engineers., • Serve as a technical point of contact for test activities in design reviews and major test events., • Help define the test strategy as the program scales toward flight demonstration and first operational systems. Basic Qualifications • Bachelor's degree in engineering (mechanical, electrical, aerospace, or related)., • [Senior level only] 5+ years of relevant experience, • Hands-on experience planning and executing test campaigns — environmental, structural, EMI/EMC, and/or functional., • Strong data analysis and failure-analysis skills, with a systems-level view of how a test result maps back to requirements., • Comfort with data acquisition, test automation, and scripting (Python, LabVIEW, MATLAB, or similar)., • Clear technical writing and communication — your procedures and reports need to stand on their own., • S. person status required (see below). Preferred Qualifications • Experience with spacecraft, satellite, or other flight-hardware AI&T., • Familiarity with embedded systems, motor/actuator control, or sensor instrumentation., • Knowledge of relevant standards (e.g., MIL-STD-810, GSFC-STD-7000 / GEVS, or equivalent NASA/DoD specs)., • Experience standing up a test lab or test infrastructure from scratch in a startup or small-team environment., • Master's degree in engineering. Compensation and Benefits Engineer: $80,000 - $120,000 Senior Engineer: $120,000 - $150,000 Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. In addition to the base salary, you may also be eligible for long-term incentives in the form of stock options. You will receive access to comprehensive medical, vision, and dental coverage, short- and long-term disability insurance, life insurance, and paid parental leave. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. ITAR Requirements To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Equal Opportunity Rendezvous Robotics is an Equal Opportunity Employer; employment with Rendezvous Robotics is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description MKS2 Technologies, LLC, an award-winning high growth small business, creates innovative and customer-centric technology solutions in the areas of Cyber Security, Instructional Design and Training, Software Engineering and IT Support Services to improve the security and well-being of our clients. Our commitment to excellence and our "Mission First" orientation has resulted in steady growth and an expanding client base across government agencies. We have employees nationwide and for the past three consecutive years were named one of the fastest growing Veteran-owned companies in the nation. Please take a moment to browse through our website and learn more about what it means to serve with MKS2. About the Opportunity Our client is a leading provider of mission-critical digital infrastructure, delivering high-performance data center and interconnection solutions that support businesses across a rapidly evolving technology landscape. Their culture is built on operational excellence, innovation, collaboration, and accountability. Team members are empowered to solve complex challenges, contribute to meaningful projects, and grow professionally while supporting critical infrastructure that powers today's connected world. Critical Operations Engineer II Location: Data Center Environment Shift: Night Shift 10:00pm-6:30am Tuesday- Saturday Compensation: $43.00 - $47.00/hour Relocation Assistance: Available for qualified candidates Position Overview The Critical Operations Engineer II is responsible for maintaining the operational integrity, reliability, and compliance of data center electrical, mechanical, fire life safety, and communications infrastructure systems. This role supports maximum uptime by performing preventative maintenance, monitoring system performance, troubleshooting issues, and ensuring critical facility systems operate efficiently and effectively. The ideal candidate will have extensive experience supporting mission-critical environments, including data centers, hospitals, power plants, or similar critical facilities. Key Responsibilities • Serve as a subject matter expert for electrical, mechanical, controls, and fire life safety systems., • Operate, monitor, maintain, and troubleshoot critical facility infrastructure., • Perform trend analysis and monitoring of operational systems., • Mentor and support junior operations staff., • Coordinate preventative and predictive maintenance activities., • Manage and support customer-impacting infrastructure projects., • Maintain operational efficiency while minimizing downtime and costs., • Support physical security and facility monitoring activities., • Manage trouble tickets, work orders, and maintenance documentation., • Coordinate contractors and vendors performing site work., • Support cage build-outs, rack and stack activities, cabling projects, and overhead installations., • Perform incident response, escalation, and reporting., • Utilize CMMS systems for asset management and maintenance tracking., • Conduct regular facility inspections and security tours., • Ensure compliance with operational procedures, safety standards, and industry regulations.Required QualificationsTechnical Knowledge, • Expert understanding of electrical and mechanical systems in critical facilities., • Experience with generators, switchgear, UPS systems, ATS/STS equipment, transformers, PLCs, chillers, cooling towers, CRAC/CRAH systems, and fire suppression systems., • Knowledge of NEC, NFPA, OSHA, and related safety standards., • Experience with monitoring, trending, and critical facility control systems., • Strong understanding of structured cabling and fiber infrastructure.Experience, • 5-7+ years of experience maintaining and troubleshooting large-scale industrial or commercial mechanical and electrical systems., • Experience supporting critical facilities such as data centers, hospitals, utility operations, or power generation facilities., • Proven experience with fiber and copper cabling installation and termination., • Experience supporting servers, network equipment, and IT infrastructure., • Demonstrated leadership and mentoring abilities.Education, • Bachelor's degree in Mechanical Engineering, Electrical Engineering, or equivalent experience., • Minimum of 5 years in a critical facilities mechanical or electrical operations role.Physical Requirements, • Ability to lift up to 50 pounds., • Ability to stand, walk, climb, crouch, crawl, and work in active mechanical and electrical environments., • Comfortable working in a fast-paced environment with changing priorities., • Ability to work evenings, weekends, holidays, and participate in on-call rotations as needed.Compensation & Benefits In addition to a competitive hourly rate, this position offers a comprehensive benefits package that may include: • Medical, dental, and vision insurance, • 401(k) with company matching, • Paid time off and paid holidays, • Bonus opportunities, • Employee stock purchase options, • Tuition and professional development reimbursement, • Wellness programs and incentives, • Employee assistance programs, • Life and disability insurance, • Employee discounts and additional voluntary benefitsAdditional Information Candidates must be authorized to work in the United States without current or future sponsorship requirements. Employment is contingent upon successful completion of applicable background screening and pre-employment requirements. Diversity creates a healthier atmosphere: MKS2 Technologies is proud to be an Equal Employment Opportunity / Affirmative Action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, protected veteran status, disability status, sexual orientation, gender identity or expression, marital status, genetic information, or any other characteristic protected by law.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description As a Group Leader on Olsson's Energy Distribution team, you will lead a dynamic group of professionals focused on delivering innovative and reliable distribution solutions. This role is ideal for someone who thrives in people leadership, mentorship, and strategic planning, and who enjoys being client-facing and connecting technical work to broader team goals. Responsibilities: • Lead and mentor a team of supervisors and technical staff, fostering growth across all experience levels., • Cultivate a culture of open communication, trust, and alignment with the Energy Distribution team's vision., • Oversee project execution and quality control to ensure successful delivery of distribution projects., • Monitor group performance, employee utilization, and workload to identify opportunities for improvement and implement strategies that enhance efficiency., • Guide process flow development and resource planning to support operational excellence., • Serve as a client-facing leader, building strong relationships and ensuring client needs are met with professionalism and technical expertise., • Help team members connect their daily work to the broader goals of the Energy Distribution team and the organization.Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Using your talents to positively affect communities. You bring to the team: • A bachelor's degree in engineering, sciences, construction, planning, landscape architecture, or a related field is preferred. An associate degree with equivalent experience will also be considered., • At least four years of experience supervising technical personnel, with a proven ability to lead through others and support teams across varying levels of experience., • 8+ years of technical experience in electrical distribution systems., • Strong background in process development and resource planning., • Proficiency in Visio and MS Project, a plus., • Excellent interpersonal and problem-solving skills., • Ability to connect with all levels of an organization and foster a transparent, collaborative environment. #LI-DNP Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range$144,000—$198,000 USDAdditional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities, • Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job DescriptionDescription: The RMH Group has been making a difference in the world and our environment through engineering for over 60 years with our headquarters located in Lakewood, Colorado and a branch office in Phoenix, Arizona. Our team is growing and looking to add an experienced electrical engineer team member to our Health & Science Team with a minimum of 15 years of design experience, ideally with experience in healthcare design. Our culture of learning and development will lead to continued growth as we place an emphasis on properly prioritizing work-life harmony while working on challenging engineering projects. We view each project as an opportunity to form a lasting partnership and we pride ourselves on our company culture. Essential Job Responsibilities Proficient knowledge of the National Electrical Code Technical experience with AutoCAD, Revit, SKM Power tools, and electrical modeling software Power design of medium and low voltage, including panel schedules, layout, circuiting, and controls Perform load calculations, voltage drop, arc flash, and circuit breaker coordinator studies Design of electrical one-line diagrams and power distribution systems Design of lighting systems Develop electrical specifications and construction cost estimates Conduct periodic job site observations and quality control tasks Communication with project leads, clients, and contractors Skills Skilled in the use of Microsoft Office and CAD, BlueBeam, REVIT, SKM Power tools/ETAP/Easy Power, and AGI32 software Work collaboratively with other disciplines and coordinate with production staff Requirements: Bachelor’s Degree in Electrical Engineering or Architectural Engineering from an ABET accredited four-year college or university Minimum 15 years of experience in the MEP industry, ideally healthcare experience (or similar projects) Professional Engineer Licensure is preferred Must be authorized to work in the United States Quality of Leadership Promotes positive attitude and image Possesses excellent motivational skills Shows fairness and consistency; is decisive Shows good judgement and reasoning ability Takes initiative to set goals and works purposefully to achieve them Exhibits effective interpersonal skills (speaking, writing, and listening) A recent Top WorkPlaces Winner, RMH promotes work life balance, presenting flexible work options that allow employees to make a bigger impact at work, at home and in the community. Join our firm to make a difference in the world through engineering. Benefits & Culture: Company-subsidized health, dental, vision Life insurance Short-term and long-term disability Health Savings Account Flexible Spending Accounts Healthcare Concierge Paid Time Off & Hybrid Work Schedules 401K & Bonus Opportunities Tuition Reimbursement Onsite Private Gym & Cafe Community Involvement Volunteer Opportunities Professional Society Membership Support Internal and External Training Opportunities Professional Licensing Newly remodeled office with custom lighting and collaboration spaces Nestled on the edge of Golden with spectacular views and access to dining The pay range for this position is expected to be within a range of $120,000 - $160,000 and is based upon multiple factors including level of experience, professional registrations and applicant knowledge, skills, and abilities. Benefits include insurance benefits, paid holidays and paid time off as well as a company sponsored 401k plan. RMH is proud to be a part of Equal Employment Opportunity (EEO), Affirmative Action (AA), and M/F/V/D employer programs.

Job Description As a trusted national architecture/engineering/construction consulting firm, Marx Okubo works with real estate owners, investors, and lenders—at every point of the property lifecycle—to evaluate their building projects, solve complex challenges and implement tailored solutions. We value technical proficiency, innovation, dedication, and achievement as well as collaboration, both within our organization and in our client interactions. Our work covers most commercial building types, including multi-family, office, retail, industrial, mixed use, and hotel/hospitality. We are currently accepting applications for an Mechanical Engineer at an Associate level to join our team in Denver. Our expected starting annual salary range is $100,000 -$120,000, plus discretionary bonuses. This role is on a hybrid schedule with 2 days in the office each week, local and regional travel to sites as needed, and work from home. Essential Functions Leverage your passion for and knowledge of mechanical, electrical, and plumbing systems and engineering to: • Conduct property condition assessments (PCAs), • Provide estimations of probable costs to repair or replace systems, • Peer review building designs, • Perform energy audits, system commissioning, forensic evaluations, construction management and design and evaluations of HVAC, electrical, plumbing and fire protection systems, • Interact with site personnel and clients, communicate clearly, • Engage in a diverse array of projects offering unique challenges and opportunities to make a tangible impact, • Travel to project sites is required Qualifications, Skills, and Experience • Ideal candidates will possess a BSME or BSAE w/mechanical specialty, PE, and at least 10 years' experience in the engineering design and evaluation of large scale building mechanical, electrical, plumbing and fire protection systems, • HVAC and plumbing system expertise is required, along with a fundamental knowledge of electrical and fire protection systems, • Working knowledge of national and state building codes and experience in facilities engineering, energy audits, commissioning and sustainability consulting, • Ability to integrate your interest in Sustainability with practical legal requirements to provide expert solutions to our clients, • LEED or CEM certificates are a plus, • Demonstrated leadership and project management successes, • Ability to communicate in a professional manner, remain organized, and multitask, • Decision-making and problem-solving experience in a technical role, • Proficiency in AutoCAD, Bluebeam, PlanGrid and Box We value professionals who are eager to collaborate across disciplines and are committed to lifelong learning in the ever-evolving field of MEP engineering. Join us in shaping the future of MEP consulting services at Marx Okubo. If you are a forward-thinking MEP professional eager to make a difference, we would love to hear from you! Physical Requirements • Candidates should have the ability to:, • Operate a computer (keyboarding) and other office productivity machinery such as a calculator, copier/scanner/printer, • Use visual acuity adequate to perform job duties, including reading information from printed sources and computer screens, • Move through construction and existing building sites over rough terrain, • See and respond to dangerous situations, • Respond quickly to sounds, • Ascend and descend ladders and stairs, • Move safely through confined spaces and narrow paths, • Work in outdoor weather conditions or unconditioned areas, • Travel approximately 25-50% of the time both in and out of state Benefits Marx Okubo is a privately held Employee Stock Ownership Plan firm; employee-owned, we offer internal growth, continuing education, mentor/mentee opportunities, as well as 100% paid health insurance premiums for employee, up to a 30% match on your 401(k) contributions, and competitive compensation. Our culture is open to fresh perspectives, curiosity, diversity, and analytical mindsets. The salary range listed for this role is $100,000-$120,000 though may vary based on aligned experience level. Marx Okubo is dedicated to the principles of equal employment opportunity. The Company’s policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also Marx Okubo’s policy to comply with all applicable state and federal laws respecting consideration of unemployment status in making hiring decisions. We perform background checks via an agency after offers of employment are accepted and review them on an individual basis for inconsistencies or violations to determine the next steps in the recruitment process. **No new agencies will be used to fill this role. Please use the link within ADP's Career Center posting to apply by August 7, 2026.

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Crusoe is building the world's favorite AI-first cloud infrastructure company, pioneering vertically integrated, purpose-built AI infrastructure solutions trusted by Fortune 500 companies. As a Senior/Staff Instrumentation and Controls Engineer, you'll significantly contribute to the design, implementation, and management of critical control systems for Crusoe’s cutting-edge Power Generation solutions. You'll oversee the entire project lifecycle for power generation controls, from initial design and installation to optimization, Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), commissioning, and initial operations support. Your expertise in instrumentation, controls systems, data analysis, and energy optimization will be vital in delivering scalable and sustainable solutions that ensure the reliable and efficient operation of our facilities, accelerating abundance of energy and intelligence. This is a full-time position. What You’ll Be Working On: Technical Problem-Solving: Provide high-level expertise, strategic direction, and technical support and knowledge for complex problem-solving related to the design and operation of Crusoe Power Generation Plant control systems. System Integration: Collaborate closely with electrical and mechanical engineers to seamlessly integrate control systems with other critical plant systems. Installation Oversight: Oversee the installation of control systems, ensuring they meet precise design specifications and adhere to stringent industry standards. System Testing and Coordination: Conduct and coordinate comprehensive testing of control systems to verify correct and safe operation, including Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT). Commissioning Leadership: Lead the commissioning process, working hand-in-hand with the project team to bring power plants online, efficiently troubleshoot issues, and ensure smooth startup operations. Real-time Monitoring & Data Collection: Manage the implementation of systems for real-time monitoring and robust data collection to continuously assess and optimize the performance of power generation systems. Operational Support: Provide essential technical support during the initial operation phase, proactively addressing any control system-related issues that may arise. Training & Documentation: Train operations staff on the effective use of control systems and develop clear, comprehensive documentation, training materials, and operational procedures. Safety & Regulatory Compliance: Ensure that all control systems strictly comply with relevant safety standards and regulations, promoting a secure operational environment. Fail-Safe & Redundancy Implementation: Develop and implement advanced fail-safe and redundancy measures to proactively prevent accidents and enhance the safety and reliability of plant operations. Quality Assurance Leadership: Drive continuous improvement by establishing and rigorously enforcing Crusoe Instrumentation & Controls standards across all projects, ensuring maximum operational integrity and reliability. Project Planning & Resource Allocation: Actively participate in project planning, scheduling, and strategic resource allocation for all control systems-related tasks. Technology Advancement: Stay continuously updated on the latest technologies and advancements in control systems and power generation, applying new insights to our operations. System Upgrades & Optimization: Propose and implement strategic upgrades to improve system performance, reduce operational costs, or increase efficiency as new technologies emerge (SCADA, DCS, and PLC Control Systems). Ambiguity Resolution: Bring structural clarity to ambiguous situations and drive cross-functional alignment to reach clear design decisions. Project Execution & Communication: Drive complex projects and tasks to completion, translating telemetry and network diagrams into clear plans for stakeholders. What You’ll Bring to the Team: Educational Foundation: Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Controls/Automation Engineering, or a related scientific/technical field is required. Power Systems Experience: Professional experience in a power systems environment, demonstrating practical, hands-on knowledge of utility-scale power generation operations. Controls System Expertise: Proven professional experience in control systems, electrical power management systems, controls engineering, or a closely related field. Technical Understanding: Strong understanding of mechanical systems, electrical systems, PLCs, and industrial control systems. Collaboration Skills: Demonstrated ability to collaborate effectively across departments to meet challenging organizational goals. Communication Proficiency: Excellent communication skills, with the ability to clearly present complex technical information to non-technical stakeholders. Data-Driven Passion: A strong passion for leveraging data to continuously improve system performance and enhance operational efficiency. Bonus Points: Master’s degree in an engineering discipline or active Professional Engineer (PE) License. Experience with Power Plant DCS (Distributed Control Systems) or PLC-based Control Systems. Specific experience with systems such as SEL PowerMax, SEL RTAC, Ignition SCADA, Ignition Historian, Canary Historian, GE Mark VIE Turbine Control Systems, Solar Rockwell PLC, AllenBradley PLCs, ComAp, ESM 2 Waukesha, or similar platforms. Active industry credentials such as Certified Energy Manager (CEM) or Project Management Professional (PMP). Benefits: Competitive compensation and equity packages Restricted Stock Units Paid time off, paid holidays & leave of absence programs Comprehensive health, dental & vision insurance Employer contributions to HSA account Paid parental leave Paid life insurance, short-term and long-term disability Professional development & tuition reimbursement Mental health & wellness support Commuter benefits (parking & transit) Cell phone stipend 401(k) Retirement plan with company match up to 4% of salary Volunteer time off Global travel insurance & emergency assistance Daily meals allowance Additional perks & programs specific to location Compensation: Compensation will be paid in the range of $150,000 - $170,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description The Senior Electrical Engineer position is responsible for providing deep electrical technical expertise, ensuring quality and integration standards are met as well as providing technical mentoring to others on the electrical engineering team. This position independently leads electrical planning, designing, engineering, and construction document production and is responsible for the overall quality of the technical output of their discipline. This individual will be directly involved in maintaining and growing client relationships as a electrical engineering expert. Management/Operational • This position has an 80% billable expectation related to actively managing electrical engineering on projects and fulfilling all the duties of an engineer., • Management of multiple, simultaneous projects from beginning to end, such as Design Basis through specifications and submittals with a demonstrated ability to clearly communicate project objectives, problems, solutions and scope changes with clients, field personnel and internal staff., • Work closely with customers, partners, and colleagues to achieve deadlines while delivering a quality product. Technical Leadership • Provide electrical technical leadership and ensuring quality and the highest level of electrical engineering services to external and internal clients., • Apply, teach, and mentor others in subject matter expertise, including knowledge of building codes, regulations, requirements, building materials, construction methods, and procedures for project work. Ability to manage the proper sequencing of construction documents., • Ability to facilitate close work with clients, field personnel and internal staff to achieve deadlines and quality work. Demonstrated ability to work well in a team/collaborative setting., • Manages information flow and looks for ways to improve project-related processes., • Pride in craft; desire to stay current and serve as a subject matter expert to identify trends and technical advances., • Able and willing to stamp/seal self-produced documents., • Able to work with minimal supervision and guidance., • Ability to direct drafting to support your electrical design., • Ability to organize and prioritize personal workload and make necessary adjustments to meet deadlines; must be results oriented and milestone driven. Talent Development & Hiring • Contribute to junior team member skill advancements via coaching and/or mentoring., • Assist in recruiting, interviewing, hiring, and onboarding new electrical team members., • Analyze project scope and assist in authoring proposals and contracts., • Nurture positive relationships with existing clients and partners through project work that assists leadership in procuring repeat client work. The Fine Print • Bachelor’s degree in Architectural/Electrical Engineering from an accredited institution with an emphasis or specific training in electrical engineering for building environments., • A Professional Engineer (PE) license is required., • Ten or more years of electrical engineering experience., • Established track record of complete electrical system design for buildings., • Building types include higher education, corporate/commercial and industrial facilities. Experience in one or more of these types of facilities is preferred, but not required., • Ability to make independent decisions within a general framework., • Demonstrated exceptional planning, analytical and problem-solving skills; ability to apply logical steps to problem solving., • Able to function effectively in a demanding environment and manage multiple projects simultaneously, • Must be proficient in Microsoft Office (Word, Excel, Access, Outlook), specialized electrical engineering software (SKM Power Tools, Visual, Elumtools), • Revit proficiency required Physical Requirements and Environmental Adaptability • Work is performed in an office setting and in the field., • Physical presence in office for a minimum of 4 days/week., • Able to move around construction sites in various stages of development., • Minimal travel is required for this position but with occasional travel to other offices., • Activities may be necessary outside of the normal office hours depending on workload, schedules, and client geographical location., • The salary range for this position is $120,000 to $150,000 based on skills and experience

Job DescriptionXcimer Energy leverages decades of research on Inertial Fusion Energy (IFE) combined with groundbreaking new laser architecture. Our mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. Xcimer has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by leading investors, Xcimer is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. Join us in powering a better world with inertial fusion! This is a full-time, onsite role based at our headquarters in Denver, CO. As a Principal Manufacturing Development Engineer, you will be responsible for developing automated equipment and manufacturing processes that enable reliable, repeatable production at increasing volumes. You will take ownership of automated manufacturing projects from concept through deployment, working closely with mechanical, electrical, controls, manufacturing, quality, facilities, and systems engineering partners. This role requires a hands-on engineer who is comfortable moving between design, prototyping, implementation, and troubleshooting in a fast-moving development environment. This position offers the opportunity to significantly influence manufacturing capability, throughput, and system reliability across multiple hardware platforms critical to fusion energy development. Responsibilities Develop Advanced Automated Manufacturing Equipment: Lead the design and implementation of automated manufacturing systems incorporating industrial robotics, motion systems, sensing, and vision technologies. Define system architectures that prioritize reliability, scalability, and maintainability. Controls and System Integration: Support controls engineers, who will develop and integrate electrical and controls systems using industrial PLCs, standard communication protocols, and HMI platforms. Support data acquisition and performance monitoring to evaluate and improve system behavior. Work with controls engineers to integrate industrial robotic systems to improve consistency, precision, and production efficiency within automated manufacturing cells. Mechanical Design and DFM Support: Design mechanical components and assemblies using 3D CAD and GD&T principles. Generate detailed fabrication drawings and provide design-for-manufacturing feedback to improve automation performance and robustness. Risk and Failure Analysis: Conduct product and process failure analyses, including DFMEA and PFMEA, to identify risks, implement mitigations, and support high system uptime. Project and Program Ownership: Plan and execute multiple projects simultaneously by setting milestones, tracking progress, managing risks, and coordinating cross-functional resources. Support the development of internal processes that enable predictable delivery. Manufacturing Process Optimization: Evaluate and improve automated manufacturing workflows by analyzing cycle times, material flow, automation ROI, and work-in-process buffering to support consistent production output. Technical Documentation and Handover: Create comprehensive documentation including electrical and pneumatic schematics, bills of materials, maintenance documentation, spare parts lists, and troubleshooting guides to support long-term operation. Safety and Regulatory Compliance: Collaborate with EHS stakeholders to perform risk assessments, define personal safety requirements, and integrate appropriate guarding. Supplier and Integrator Management: Work with procurement and external vendors to develop RFQs, define technical specifications, manage build and installation phases, and lead factory and site acceptance testing for robots, cobots, palletizers, and other actuated parts of the production line. Support and coordinate with controls engineers who will own controls hardware definition and procurement. Qualifications • Education: Bachelor’s or Master’s degree in Mechanical Engineering, Electrical Engineering, Robotics Engineering, or equivalent practical experience, • Experience: 7+ years of experience in production line development, • Demonstrated experience integrating industrial robotic systems, • Strong mechanical design capability using SolidWorks, including GD&T and drawing release for automated equipment, • Experience delivering manufacturing robotics or capital equipment projects from concept through commissioning, with proficiency using tools such as Jira or equivalent project tracking systems, • Background in manufacturing optimization using Lean principles, Six Sigma tools, and structured problem-solving methodologies, • Experience integrating machine vision systems, sensors, and closed-loop feedback for precision automation, • Clear written and verbal communication skills, with the ability to develop technical specifications and collaborate effectively across disciplines, • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee of granted asylum Candidates may be considered for other positions at Xcimer Energy, and our actual base salary will be determined on an individual basis and may vary based on job-related knowledge and skills, education, and experience. The range is published in accordance with Colorado Equal Pay for Equal Work Act and California Equal Pay Act.Equal Employment OpportunityXcimer Energy is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified, diverse, and dedicated work force. Xcimer Energy hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork, in which all employees recognize and appreciate the diversity of individual team members. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, gender, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Xcimer Energy will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws. For more information on “EEO Is the Law,” please see here and here. BenefitsBenefits Employee Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave (must be employed at time of birth or adoption), short and long-term disability, 401(k) with a company match of up to 6%. Paid Time Off: 15 days per year based on weekly scheduled hours, 10 paid sick leave, and 13 company-paid holidays for all regular employees (including part-time), fixed-term, and interns. Equity will be granted to eligible employees. Equity is designed to allow employees to share in company results and success. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position: Fire & Explosion Engineer Reports To: Company Partners Job Type: Full-time / 40 hours per week expected Salary: $90,000 – 120,000 depending on experience Job Location: Golden, Colorado (Hybrid) Overview: We are looking for a qualified candidate to build and lead a nationwide thermal science practice with a focus in fire and explosion investigations. Location preference is Colorado. Join a growing forensic engineering and architecture firm that specializes in investigating and repairing damaged structures and infrastructure. Requirements: • Must have 8+ years of related experience., • Must have CFEI or CFI certification., • Qualified candidates will have a degree in a related field such as chemical engineering, electrical engineering, mechanical engineering, or fire protection engineering., • Master's or PhD preferred., • Relocation assistance possible., • Testimony experience preferred., • Must be able to travel nationally and perform site inspections., • Job based in Denver, CO with national travel. Benefits: • Insurance (Health, Vision, Life, Disability, Dental), • 6% employer 401k matching, • Maternity leave program, • Flexible schedule with work from home opportunity, • Vacation and Sick Pay, • Paid holidays, • Professional license and professional development costs paid by employer, • Colorado office with engineering testing laboratory

Job Description$100,000-$130,000 The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents Ability to program projects with various levels of complexity Capable of performing network troubleshooting, database troubleshooting and repair programming Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems Maintains accurate and thorough project documentation and redlines Provides owner training as required by the project Executes system commissioning and functional testing Assist in installation of control hardware Startup and commission new hardware installations Provide project management assistance on projects as required, interfacing directly to customers Supervise sub-contractors and suppliers as needed Help educate lower-level technicians through on the job training as needed *This position will require a minimum of 25% travel Required Skills Excellent verbal and written communication skills Proficient in Microsoft Office Suite or related software Programming skills Strong analytical skills Strong interactive and communication skills Strong troubleshooting skills Experience with electronics and basic electrical circuits Thorough understanding of and ability to use appropriate tools Excellent customer service and ability to work well with others Knowledge of DDC Control Theory and Applications as related to HVAC equipment Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education At least 3 years of experience with programming, startup and commissioning of control systems Niagara N4 certification Experience with multiple manufacturers of controls a plus Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements Physically able to climb overhead or crawl under spaces to complete jobs. Must be willing to work at heights. Must be able to lift up to 35 pounds at times.

Job DescriptionJob Title: Substation Commissioning EngineerJob Description We are seeking an experienced Substation Commissioning Engineer to support greenfield and brownfield substation projects across Colorado. This role focuses on final testing, validation, and energization of substation protection and control systems, ensuring all equipment operates safely and reliably before being placed into service. You will play a critical role at the highest-impact phase of each project, with clear opportunities to grow into leadership positions. Responsibilities • Support commissioning efforts for both greenfield and brownfield substations across Colorado., • Perform comprehensive protection and controls testing and validation for substation systems., • Review, execute, and document relay testing procedures and logic verification activities., • Interpret and work with three-phase electrical systems to assess readiness and functionality., • Provide final technical review and sign-off prior to energization of substations and associated equipment., • Ensure all systems are fully operational, properly configured, and compliant with design and safety requirements before energization., • Take ownership of final checks, demonstrating high attention to detail and accountability for system performance., • Contribute to relay setting development and participate in substation design reviews as needed., • Collaborate with project teams and field personnel to resolve issues identified during commissioning and testing., • Support project success by working in live, high-impact environments during the final stages of energization., • Travel to substation sites across Colorado, including a mix of local Denver Metro work and assignments up to approximately two weeks at a time.Essential Skills, • At least 5 years of field experience in substation protection and controls testing., • Hands-on experience performing substation commissioning and final energization support., • Strong background in protection and controls testing for substation systems., • Proven experience with relay testing and understanding of relay logic to validate protection schemes., • Solid understanding of three-phase electrical systems and their application in substation environments., • Demonstrated ability to take ownership of final sign-off responsibilities prior to energization., • High attention to detail and strong sense of accountability in field and commissioning work., • Comfort working in field environments and live, high-impact substation conditions., • Willingness and ability to travel across Colorado, including short-duration trips up to approximately two weeks at a time.Additional Skills & Qualifications, • Electrical engineering degree preferred., • Professional Engineer (PE) license strongly preferred., • Senior relay technicians with 10–15+ years of experience may be considered in lieu of a degree., • Experience with relay setting development is beneficial., • Substation design experience is a plus., • Exposure to project leadership or project management responsibilities is advantageous., • Based in the Denver Metro area or Colorado Springs is preferred., • Relocation and sign-on bonus may be available for strong candidates., • Interest in progressing into leadership roles such as project management, field service management, or operations.Work Environment This is a field-based role working at substation sites across Colorado, with approximately 60% of assignments in the Denver Metro area and additional travel to other locations for periods typically up to two weeks at a time. You will work in live, high-impact environments during the final stages of substation energization, handling complex protection and control systems and critical infrastructure equipment. The position offers a mix of local and travel-based work, exposure to advanced substation technologies, and direct involvement in the most impactful phase of each project. The culture emphasizes technical excellence, accountability, and professional growth, with a clear path into leadership roles and strong compensation growth tied to technical advancement. Dress and conduct are expected to align with safe, professional field and substation site standards. Job Type & Location This is a Contract to Hire position based out of Centennial, CO. Pay and Benefits The pay range for this position is $60.00 - $80.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Centennial,CO. Application Deadline This position is anticipated to close on Aug 11, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionSalary: $40 -$63 an Hour DOE Engineer III CANUSA EPC LLC Denver Colorado - In office Role Summary CANUSA EPC LLC is seeking a Project Engineer III to execute upstream and midstream oil & gas projects from definition through delivery. This role requires an engineer with 48 years of EPC/EPCM or owner-side experience who understands how projects actually get built not just designed. The Project Engineer III is responsible for planning, scheduling, cost control, technical oversight, and field execution, while providing leadership and mentorship to junior engineers. This position regularly interfaces with clients, vendors, and subcontractors and is expected to make sound engineering and execution decisions. Primary Responsibilities • Plan and execute upstream and midstream oil & gas projects in accordance with PMI-based project controls, • Develop project execution plans, schedules, budgets, and forecasts, • Manage engineering deliverables across piping, process, mechanical, electrical, civil, and automation disciplines, • Control engineering, fabrication, and automation progress against project scope and schedule, • Manage procurement activities and vendor technical alignment, • Develop TIC estimates for brownfield and greenfield facilities, • Implement and manage project change control, • Perform quality control reviews of engineering deliverables, • Coordinate subcontractors, vendors, and internal design teams, • Generate project progress, forecast, and cost control reports, • Lead project and technical coordination meetings, • Serve as the primary engineering interface with clients and operations personnel, • Support proposal development, EPC estimates, and new business pursuits, • Travel to project sites for meetings, inspections, and field support Engineering Responsibilities • Generate and evaluate specifications for piping systems, compression, pumps, and rotating equipment, • Develop and review Piping & Instrumentation Diagrams (P&IDs), • Review and approve detailed piping layouts and fabrication drawings, • Perform pipe sizing calculations and system evaluations, • Size and evaluate engineered equipment and instrumentation (PSVs, meters, valves, etc.), • Specify vendor requirements and review technical submittals, • Monitor vendor progress and compliance with design specifications, • Conduct site walks and field surveys to gather design and constructability data, • Interface directly with customer engineering, operations, and maintenance teams, • Mentor and technically guide junior engineers and designers Required Technical Competencies • Strong working knowledge of ASME B31 piping codes and applicable oil & gas standards, • Proficiency with P&IDs, mass balance diagrams, and piping specifications, • Experience with compression, pump, and rotating equipment sizing, • Working knowledge of process simulation tools (ProMax, HYSYS), • Proficiency in piping design and material selection, • Familiarity with oil & gas constructability, fabrication, and logistics, • Experience reviewing vendor drawings and data books, • Working knowledge of Bluebeam, • Solid understanding of oil & gas facility execution (greenfield and brownfield) Project & Leadership Skills • Working knowledge of PMI project execution principles, • Ability to lead interdisciplinary engineering teams, • Strong technical judgment and decision-making ability, • Effective communicator with clients, vendors, and internal teams, • Organized, detail-driven, and capable of managing multiple work fronts, • Self-directed engineer who understands execution constraints and field realities Experience Requirements • 48 years of engineering experience in upstream or midstream oil & gas or refining, • Experience working with EPCs, EPCMs, producers, or midstream operators, • Background in engineering design, construction management, or facility operations Education & Credentials • Bachelors Degree in Engineering, • Eligible for Professional Engineer (PE) licensure in the U.S. (preferred), • Oil & Gas construction or operations training, • Valid drivers license, • Valid passport with eligibility to travel between the U.S. and Canada Work Environment • Combination of office and field-based work, • Travel to project sites across North America, • PPE required at job sites Why CANUSA EPC LLC We execute projects with a practical, field-driven mindset. Engineers here are trusted to make decisions, own their scope, and see projects through from concept to commissioning. Pay is based on experience Job Type: Full-time

Job Description Today, everything we send to space is constrained by what fits inside a rocket fairing. That's a fundamental bottleneck to building more capable spacecraft. Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles: modular spacecraft components that rendezvous, dock, and latch to assemble bigger and more powerful spacecraft than anything that can be folded to fit into a rocket. We're a small team based in Golden, Colorado, executing on a clear path from flight demonstration to our first operational systems. Our work spans hardware, software, and systems engineering. We are looking for the best people in the world who want to build the next generation of advanced spacecraft. Senior GNC Engineer, Navigation (Swarm/Vehicle) As a Senior GNC Engineer, Navigation (Swarm/Vehicle), you will be responsible for the complete lifecycle of the relative-state estimation that makes electromagnetic docking possible. You will define the navigation accuracy budget the control loop is built on, design and tune the filter that delivers relative ranging and bearing from the tile sensor suite, prove it through analysis and simulation, and bring it into reality in onboard flight software. This is an opportunity to apply expertise in estimation and sensor fusion to both set the sensor suite and interface requirements and implement the onboard navigation that delivers them —working collaboratively across control, perception, and avionics to close the docking loop on hardware, ultimately defining the navigation scope and requirements for future tiles. Secondarily, you will also support absolute navigation of the swarm once it is docked, latched, and now functioning as a monolithic spacecraft/vehicle. These are the traditional set of GNC problems related to orbit navigation and propagation. Responsibilities • Develop highly reliable, performant state estimation and navigation algorithms, simulations, tools, and dashboards in C++ and Python, • Own relative-state estimation for proximity operations and docking: design, implement, tune, and verify filters (EKF, UKF, etc), • Deliver relative pose- and position-knowledge at the range-dependent requirements that guarantee closed-loop stability, • Derive measurement models from first principles for relative ranging and bearing from the tile sensor suite, • Define and own the perception interfaces to navigation, • Verify estimator performance and robustness with hardware-in-the-loop (HITL) experiments, • Support flight operations, monitor on-orbit health and performance, lead on-orbit anomaly investigations, and drive on-orbit system reliability of navigation algorithms, • Secondarily, support development of navigation algorithms for the assembled spacecraftBasic Qualifications, • Bachelor's degree in aerospace/electrical engineering, physics, mathematics, or other relevant engineering discipline, • Software development experience in C++ and PythonPreferred Qualifications, • Master's or PhD in an engineering discipline or physics: 5+ years of professional GNC or state-estimation experience, • Expertise in computer vision, sequential estimation techniques, including Kalman filtering, residual editing, filter tuning, covariance analysis, consider parameters, adaptive processes, and covariance realism, • Strong understanding of electromagnetic systems, orbital mechanics and high-fidelity orbit propagation (perturbations in low-Earth orbit, drag modeling, etc), and embedded software development, • Proficiency in measurement and sensor handling, including measurement processing, measurement modeling, debiasing, sensor calibration, image processing, optical observations, etc, • Proficiency in data analysis techniques, including statistical tests (e.g., chi-squared, Kolmogorov-Smirnov) and data correlation methods, • Proven ability to develop, test, and deploy algorithms for real-world space/robotic applications, with proficiency in version control systems like Git, • Capable of identifying and solving complex problems with little to no supervision or direction in a fast-paced, start-up environment, • Passionate about solving hard problems, building things, and advancing the space industry, • Excellent written and verbal communication skillsCompensation and Benefits Senior GNC Engineer: $145,000.00 - $190,000.00 Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. In addition to the base salary, you may also be eligible for long-term incentives in the form of stock options. You will receive access to comprehensive medical, vision, and dental coverage, short- and long-term disability insurance, life insurance, and paid parental leave. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. ITAR Requirements To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Equal Opportunity Rendezvous Robotics is an Equal Opportunity Employer; employment with Rendezvous Robotics is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description US Citizenship is required An active TS/SCI w/CI Polygraph is required Occasional CONUS and OCONUS travel may be required Annual Base Pay: $150-180k with 25% company funded 401k based off base pay DPG Solutions is seeking a qualified and experienced RF Systems / Hardware Engineer to support engineering analysis, baseline management, operations and maintenance, system enhancement, and integration activities for a complex, high-priority operational communications system. This role is best suited for an engineer with hands-on experience supporting RF ground systems, satellite communications systems, hardware sustainment, troubleshooting, requirements management, and operational system support. The selected candidate will help ensure the successful operation, maintenance, sustainment, and enhancement of hardware associated with mission-critical communications capabilities. The ideal candidate will be comfortable working across engineering, operations, maintenance, troubleshooting, documentation, and system improvement activities. This person should be able to diagnose system issues, collect and analyze diagnostic data, restore system operations, develop workarounds, support new capability development, and provide recommendations that improve system performance, reliability, and operational efficiency. Job Description DPG is hiring an RF Systems / Hardware Engineer to support operations, maintenance, sustainment, and enhancement of a complex operational communications system. The selected candidate will provide RF systems engineering support, hardware troubleshooting, requirements analysis, baseline management, technical documentation, and integration support. This role requires strong technical judgment, hands-on RF test equipment experience, the ability to troubleshoot and resolve system outages, and the discipline to document issues clearly through logging and discrepancy reporting tools. The RF Systems / Hardware Engineer will support system recovery activities, operational process improvements, concept of operations development, architecture recommendations, and engineering change support. What You Will Do • Support operations, maintenance, sustainment, and enhancement of RF ground systems and satellite communications system hardware., • Provide engineering analysis, baseline management, system enhancement, integration, and operational support., • Troubleshoot, document, and resolve system outages and other operational issues., • Collect diagnostic data, analyze system behavior, document discrepancies, and support restoration of system operations., • Develop workarounds and corrective actions necessary to recover or improve system performance., • Store, retrieve, manipulate, and analyze data to support troubleshooting, system capability assessments, and requirements analysis., • Use RF test and diagnostic equipment such as spectrum analyzers, network analyzers, signal generators, oscilloscopes, and logic analyzers., • Monitor equipment performance and make required modifications to ensure systems operate in accordance with specifications., • Generate, analyze, track, and manage system and hardware requirements., • Develop and maintain schematics, analysis products, block diagrams, system bills of material, and design review packages., • Support engineering change activities, including design performance and cost trade studies., • Provide recommendations for new operational concepts, system architecture, system enhancements, and process improvements., • Support the development and refinement of operational and engineering processes and procedures., • Support the generation of concepts of operations and provide technical recommendations for system architecture., • Identify and document RF capability enhancements through white papers, technical recommendations, and other formal submittals., • Contribute effectively on design teams and provide technical insight to engineering team members., • Provide occasional after-hours call-in support when required., • Support occasional CONUS and OCONUS travel, including emergency repair trips with little or no advance notice., • Work at heights when required and complete applicable safety requirements for antenna or tower training. Qualifications You Must Have • Prior experience supporting operations, maintenance, troubleshooting, and sustainment of RF ground systems or satellite communications systems., • Experience in maintaining, repairing, and enhancing mission-critical communications system hardware and related RF/SATCOM infrastructure., • Proficiency using RF test and diagnostic equipment, including spectrum analyzers, network analyzers, signal analyzers, signal generators, oscilloscopes, FieldFox, and similar tools., • Experience troubleshooting loss-of-signal issues across antenna, RF, modem, cabling, and signal-processing paths., • Experience performing periodic maintenance on moveable antenna systems, including familiarity with antenna control units, servos, and related mechanical/electrical subsystems., • Familiarity with upconverters, downconverters, modems, encoders, modulators, antenna control units, servos, and related SATCOM/RF components., • Hands-on experience with ViaSat equipment and AMERGINT modems., • Strong knowledge of RF cabling, connectors, cable construction, termination, testing, and validation., • Understanding of signal loss over distance, frequency-dependent cable loss, and cable selection for different frequencies, power levels, environments, and mission applications., • Experience in collecting diagnostic data, documenting technical issues, supporting discrepancy reporting, identifying root cause, and restoring system operations., • Experience in generating, analyzing, tracking, and managing technical requirements., • Experience developing and maintaining RF systems engineering documentation, including schematics, block diagrams, system analysis, bills of material, design review packages, white papers, and technical recommendations., • Experience supporting performance, design, and cost trade studies for proposed engineering changes., • Ability to apply technical knowledge and operational experience to recommend new concepts, architectures, capability enhancements, and system improvements., • Ability to contribute effectively on technical design teams and provide sound engineering input., • Strong written and verbal communication skills., • Ability to provide occasional after-hours call-in support., • Ability to support occasional CONUS and OCONUS travel, including emergency repair travel with limited advance notice., • Ability to work at heights and complete applicable antenna, tower, or site safety training requirements. Qualifications We Prefer • Experience with RF ground systems supporting satellite communications missions., • Experience with operational communications systems in defense, intelligence, aerospace, or mission-critical environments., • Experience supporting fielded systems where uptime, reliability, and rapid restoration are critical., • Experience supporting hardware integration, system enhancement, and new capability development., • Experience with requirements verification, test support, system validation, and configuration baseline management., • Experience supporting design reviews, technical reviews, and engineering change boards., • Experience with system architecture analysis, concept of operations development, and operational workflow improvement., • Experience performing fault isolation across RF hardware, communications equipment, antennas, cabling, interfaces, and supporting infrastructure., • Experience working in secure, controlled, or government customer environments., • Familiarity with safety, security, export control, and quality requirements associated with defense or aerospace systems. Desired Skills • Strong RF systems engineering judgment and the ability to troubleshoot complex operational issues., • Ability to communicate technical findings clearly to engineers, program personnel, operations teams, and customer stakeholders., • Ability to work independently in dynamic operational environments., • Ability to balance immediate operational recovery needs with long-term system improvement., • Strong attention to detail in technical documentation, discrepancy reporting, and configuration control., • Ability to support process improvements that increase system reliability, maintainability, and operational efficiency., • Comfortable working hands-on with hardware, test equipment, fielded systems, and operational communications infrastructure., • Strong problem-solving skills and ability to stay calm during time-sensitive troubleshooting or outage recovery efforts., • Work Location, • Work location to be provided by the program., • Occasional CONUS and OCONUS travel may be required., • Occasional after-hours call-in support may be required. Overview of Benefits • Annual Base Pay: $150-180k with 25% company funded 401k based off base pay, • Company-funded 401 (k) Profit Sharing Plan with 25 percent of base pay deposited every pay period and vested on the first day of employment., • All health care benefits and premiums paid by the company, with the company's HSA contribution., • Quarterly equity share bonuses., • 250 hours of PTO, with up to 40 hours available to carry over., • Biannual company-sponsored events for employees and their families., • Education benefits, including certification reimbursement and tuition reimbursement.

Job Description The Dahill Group is pleased to be assisting our client, a major energy industry service provider across North America, in search of an exceptional Project Engineer Gas to join their team. This position is responsible for the safe and successful design, development and execution of natural gas facilities including compression, liquefaction, CNG or LNG storage solutions and pipeline connections/associated laterals to support various power projects across the US. Primary Responsibilities Project Design and Development · Coordinate with power team to provide preliminary engineering and planning estimates/timing for pipeline connections and backup storage solutions (CNG or LNG) on proposed power projects · Coordinate with business development and gas supply teams to plan and execute receipt point facility contracts with pipelines · Develop and present project execution plans (capital budget, timing, sourcing strategies, risk mitigation, etc.) for projects seeking FID Project Execution · Manage permitting, engineering, procurement, construction and commissioning phases of gas pipelines, CNG and LNG storage projects · Validate and approve invoices for project materials and services · Provide regular reports of milestones met, projected cost/schedule, and potential risks and mitigations for assigned projects Project Closeout · Ensure handoff to operations is organized, documented and complete · Organize and facilitate project lookbacks, document successes and learnings Qualifications & Requirements · Bachelor of Science in Chemical, Mechanical, Electrical or Petroleum Engineering · Recent experience managing the planning and execution of scheduled-driven projects of $30MM or more, preferably for oil and gas pipelines/facilities or power plants · Strong experience (10+ years) with pipeline and facility engineering, permitting, construction and commissioning. · Experience with LNG liquefaction or storage and virtual pipelines a plus Indicators & Attributes for Success • Effective and decisive decision-making skills, • Attention to detail, • Cultural awareness, • Business acumen, • Customer/Client focus, • Critical evaluation, • Positive attitude, • Organizational and prioritization skills, • Communication skills, • Accountability, • Ethical practice, • Patience, • Flexibility, • Must be sensitive to corporate needs, employee goodwill, and the business needs Working Conditions/Environment · Operate primarily in a professional and/or business casual office environment. Travel for field visits required as necessary. · Routinely uses standard office equipment such as laptops, photocopiers/scanners, and smartphones. · Evening and weekend work may be required as job duties demand. Salary & Benefits Base Salary: $180,000 - $220,000 - commensurate with experience Target Cash Bonus: 20% LTI – Qualifies for LTI in RSU’s with an anticipated target of 20% Benefits include: 401K Match Flexible PTO Health Insurance/vision/dental/short term-long term disability NOTE: This position will be based and required to work on-site in the Denver office.

Job Description Electrical Engineer - Power Distribution and Analysis HED is looking to add an experienced team member to our group of talented Electrical Engineers. The candidate should have broad electrical engineer expertise, with a focus on power distribution system and power system analysis for medium voltage, low voltage and DC systems. Primary responsibilities will include providing voltage drop, short circuit, selective coordination and arc flash analysis for large, complex projects. Proficiency with SKM software is required. Familiarity with harmonic analysis, power quality analysis and grounding system calculation methods and other analytical software is a plus. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role manages analytical portions of electrical scopes, related QAQC efforts, mentors team members, and represents the discipline in client-facing settings. Individuals in this position are expected to independently deliver technical content to support early designs, confirm equipment specifications and design for construction documentation as well as prepare final analysis report and device settings during construction. In addition, this position is expected to identify and resolve system-level challenges, and contribute meaningfully to project strategy, team development, and firmwide standards. Essential Functions: • Support the design and documentation of complex electrical system with power system analysis., • Perform key electrical engineering calculations and curate data gathering and oversea data entry into analysis software platform for systems analysis and coordinate integration of analysis results into system design., • Resolve system conflicts during interdisciplinary coordination by collaborating with owner and other internal/external team members., • Serve as the primary electrical technical contact across internal and external project teams., • Support preparation of technical specifications, • Support team review and approval of electrical submittals, RFIs, and substitutions; coordinate detailed responses with the broader team., • Perform site visits, field verification, and punch walks with high autonomy; generate professional-level electrical field reports., • Support electrical design leadership from early concept through construction administration; Inform system technical specifications, equipment performance minimum ratings, and support documentation accuracy., • Perform QAQC reviews for electrical deliverables and assist in the development of project-specific electrical quality plans., • Mentor junior engineers and electrical designers through delegation, technical feedback, and one-on-one coaching of power system analysis., • Participate in scoping and resource planning for electrical analysis scope in project planning and project proposals., • Contribute to internal and external project meetings by presenting electrical system concepts, decisions, and trade-offs. Requirements • Bachelor’s degree in electrical engineering or equivalent required., • P.E. licensure required., • 10+ years in the AEC Industry preferred., • An understanding of the estimating and managing project manhour efforts for analytical scope for development of resource allocation, schedule, deliverable commitments and fee., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills required., • SKM experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required., • Delegation to junior or external third-party staff Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job DescriptionDescription: Do you want to work with a team that uses creative solutions and advanced design tools? Swanson Rink is a leading Engineering firm providing Baggage Handling Systems (BHS) design nationwide. We are looking for a Senior Engineer who can immediately engage with our team and our clients on exciting projects. Project teams consist of support engineers, BIM staff and project managers. As a Senior Baggage Handling Systems Engineer with Swanson Rink, this position will lead a team to provide analysis, design, and construction administration for baggage handling systems to airports nationwide. Get to Know Us:INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports, and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits (Denver), • Stock purchase plan, • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions Your Job Responsibilities: • Lead the design of Baggage Handling Systems to include:, • Calculations to determine the peak node throughput., • Adherence to BHS conveyor design requirements that meet TSA Program Guideline Design Standards (PGDS) and client/customer contractual design/performance requirements., • Product selection and layout of complete functioning systems and project throughput requirements., • Control systems design., • Cost estimating and Life Cycle Cost Analysis., • Testing and commissioning of completed systems to ensure compliance with TSA iSAT and client/customer requirements., • Lead design reviews and customer technical presentations/evaluations., • Provide continuous on-the-job training and mentoring to staff.Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Mechanical or Industrial Engineering from an ABET accredited four-year college or university., • A minimum of 7 years’ experience in design of aviation Checked Baggage Inspection Systems (CBIS)., • Demonstrated supervisory/leaderships skills., • Registration as a Professional Engineer., • Must be able to successfully pass background checks, security screenings and drug testing as required by TSA, our clients and/or Federal contracts., • Must be available to travel occasionally., • Must be authorized to work in the United States. Salary range of $140,000 – $160,000 and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Job DescriptionDescription: Are you Passionate about Power? As an Electrical Engineer with Swanson Rink, you will have the opportunity to work on a variety of projects with high-profile clients who are passionate about their facilities and work in a collaborative process to find the right solutions for their unique needs. Our engineers are supported by specific Project Management and BIM staff allowing our engineers for focus specifically on developing engineering solutions for our clients. We are looking for engineers who have attained initial experience in electrical engineering design and are seeking an opportunity to engage in this exciting and challenging market. Get to Know Us: INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports, and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits (Denver), • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions, • Stock purchase plan and stock grant programs At Swanson Rink, we believe the people who build this company should share in its success. That's why we offer stock incentive plans to every employee, with opportunities that grow with your tenure. Ownership isn't just a title here — it's something you earn and carry forward. Your Job Responsibilities: • Design electrical systems for data centers, aviation and commercial/industrial facilities including:, • Design power systems, including layout and circuiting of receptacles, miscellaneous equipment, mechanical equipment, and completion of panel schedules., • Power design associated with UPS and generator support systems, mechanical systems and other equipment., • Design of electrical one-line diagrams., • Conduit routing, layout and circuiting of receptacles, and completion of panel schedules., • Short circuit and voltage drop calculations., • Fuse and circuit breaker coordination studies., • Prepare studies on various electrical systems, identify options and potential solutions. Provide related cost comparisons., • Development of specifications for the lighting and power systems., • Review of contractor’s shop drawings and submittals., • Construction observations., • Demonstrates expert application of local and national building codes and all applicable safety codes and industry standards and International Building Codes, • May engage in business travel for client meetings, field surveys, etc., • Participate in seminars and training events to stay current with industry trends. Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Electrical Engineering from an ABET accredited four-year college or university., • Registration as a Professional Engineer or be willing to become licensed., • Certification as an EI/EIT required., • Minimum of 2 years’ experience as a consulting engineer., • Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts., • Must be authorized to work in the United States. Salary range of $80,000 - $110,000 and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Job Description The Senior Electrical Engineer will work in a fast-paced multi-discipline team environment responsible for designing building systems and producing construction documentation for institutional projects in the higher education, government and healthcare markets. We are looking for a highly motivated Senior Electrical Engineer to be part of our firm. In this role, you will • Design electrical systems including lighting, power, fire alarm, telecom and security., • Develop calculations for lighting systems and associated controls., • Develop electrical system design calculations., • Prepare detailed design documents in REVIT., • Perform QA/QC design work., • Lead a project team and managing projects., • Coordinate with Owners and Architects., • Coordinate work with other disciplines., • Complete code compliance research., • Oversee and provide guidance to junior engineers., • Assist in the procurement of new work, including the development of client relations. You will be a great fit if: • 5-8 years of hands on design experience as registered engineer in building construction., • You have a bachelor’s degree in Electrical Engineering or a related field., • You possess a Professional Engineer license, PE or are in the process of obtaining a PE., • You have experience with complex institutional, high-rise mixed-use and commercial projects., • You have LEED experience, certification is desired., • You are familiar with codes, standards and design guidelines., • You have Project Management experience. Skills/abilities: • Excellent work ethic and attitude., • Interpersonal communication skills, combined with organizational skills, the ability to plan, balance and prioritize work., • Ability to lead a team as well as work as part of a team., • Proficient in Revit and MS Office. Location: Denver, CO or South Jordan, UT (Hybrid) Compensation: This is a full-time position as an employee working hybrid. Benefits include a health insurance plan, a 401K profit sharing plan, and PTO. The position offers competitive compensation with an anticipated annual salary range of $90,000 to $155,000, based on candidate experience. Equal Opportunity Employment Statement Our client provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Our client will accommodate the disability-related needs of applicants as required by law. Qualifications Education Preferred Bachelors or better in Electrical Engineering or related field. Experience Preferred 8 years: You have 5-8 years hands on design experience in building construction

Job Description Overview Opportunity: Engineering Supervisor Perform general maintenance functions to ensure guest service and sustainability standards are achieved and maintained throughout the hotel structure. Potential Career Path Chief Engineer – Area Chief Engineer – Regional Director of Engineering Essential Job Functions • Assist Chief Engineer in interviewing, selecting, training, scheduling, coaching and supporting associates, ensuring they perform in accordance with established brand or hotel standards and consistent with HHM core values., • Conduct room inspections and identify repair needs., • Manage and coordinate bids, quotes and contracts for 3rd party vendors., • Oversee small projects, or PIPS, and manage and report on the work progress., • Install or repair sheet rock and other wall coverings., • Paint designated areas and items., • Install and replace basic electrical fixtures., • Install, replace, and program televisions., • Perform minor plumbing functions., • Replace and repair heating and cooling pumps as well as preventative maintenance on units., • Troubleshoot and repair kitchen equipment., • Perform preventative maintenance on a scheduled basis and complete work orders as necessary; keep accurate records of PM’s on all rooms and equipment., • Maintain the building exterior and “curb appeal” of entire hotel grounds., • Refurbish, paint and finish furniture and fixtures as needed., • Test, examine, and maintain hotel’s life safety systems to ensure they are 100% operational at all times., • Maintain repair and preventive maintenance records and coordinate compliance of service contracts., • Perform and maintain work to local, state and Federal codes., • Be aware of guest satisfaction scores and work toward increasing departmental and overall guest satisfaction., • Follow sustainability guidelines and practices related to HHM’s EarthView program., • Practice safe work habits, wear protective safety equipment and follow. MSDS and OSHA standards. • Perform other duties as requested by management. Position Requirements • High School diploma and/or trade school course work in related field preferred., • Previous engineer/maintenance experience required or equivalent training., • Local or state certifications may be required. Work Environment and Context • Work schedule varies and may include working on holidays and weekends or alternate shifts., • Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, climbing, stooping, kneeling or crouching. What We Believe People Are Our Capability – Hearts That Serve – Only Excellence – Stay Nimble - Own It.

Job Description ICT Engineer - Mission Critical HED is looking to add an experienced person to our ICT team. The ICT Engineer is HED’s foremost expert in the planning, design, and delivery of advanced information and communication technology (ICT) systems in the mission critical data center environment. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role operates as a sector-wide authority and trusted advisor, translating complex client and project needs into innovative, integrated ICT strategies that drive building performance, resiliency, and future-ready design. At this level, the ICT Engineer sets vision for discipline growth, guides multidisciplinary coordination at the highest level, and champions firmwide innovation in digital building infrastructure. They serve as the “go-to” resource across the mission critical sector, shaping technical excellence, mentoring leaders, and strengthening client trust through thought leadership and advocacy. Essential Functions: • Provide sector wide mission critical leadership for ICT system design, delivery, and innovation across large-scale, complex, and high-profile data center projects., • Set vision for ICT integration, ensuring alignment with client objectives, sustainability goals, and HED’s multidisciplinary design excellence., • Serve as the highest-level technical authority on structured cabling, network/telecom infrastructure, wireless systems, audiovisual, and converged building systems., • Translate emerging technologies, digital design trends, and industry standards into HED best practices, standards, and tools., • Direct and review highly complex ICT analyses, specifications, and interdisciplinary coordination, ensuring excellence and code compliance., • Lead client-facing engagements as a trusted advisor, including business development pursuits, interviews, and strategic partnerships., • Mentor and develop senior ICT engineers, advancing future firm leaders., • Champion firmwide knowledge-sharing by authoring white papers, speaking at conferences, and leading cross-sector innovation initiatives., • Oversee discipline performance in construction administration, providing expert resolution for the most complex field conditions., • Serve as a resource integrator, building professional networks and leveraging external partnerships to drive firm growth and technical distinction. Requirements • Bachelor’s degree in electrical, ICT, or related Engineering discipline required or equivalent tenured experience as demonstrated through industry recognized certification and/or licensure; Master’s degree preferred., • RCDD certification required., • Advanced professional certifications strongly preferred, such as BICSI DCDC/OSP, PMP, or LEED AP., • 10–15 years of ICT or low-voltage design experience in the AEC industry, with significant leadership in large-scale, multidisciplinary projects., • Recognized expertise in structured cabling, network/telecom infrastructure, and low-voltage systems integration., • Proven ability to set vision and strategy for ICT within an integrated design environment., • Exceptional communication and leadership skills, with demonstrated success in influencing client, team, and industry decisions., • Proficiency in Revit, AutoCAD, and ICT-related design software required., • Advanced knowledge of ICT standards (BICSI, TIA/EIA, NEC) and relevant building codes required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionDescription: Intermountain Electronics (IE) delivers dependable and effective critical power and process infrastructure and mission critical systems to virtually every industrial sector in North America. We provide custom-engineered, packaged equipment to industrial markets. We specialize in designing, manufacturing, automating and testing power distribution equipment for OEM, mission critical, oil and gas and mining industries. Reporting directly to the Engineering Manager we are currently seeking an Electrical Engineer for our Day Shift to be based at our facility. Why you will love working at IE: You will love the challenging, interesting and varied work, and endless opportunities, but most importantly you will love working with a team of fun loving, driven, and generous go getters that take deep personal pride in being part of a family that is building the 7infrastructure that powers the world. To learn more about our company and our cutting-edge products, visit ie-corp.com Job Description Job Title: Electrical Engineer II Benefits: • Competitive salary, • PTO (Paid Time Off), • Paid Holidays (10), • Medical and Dental Plans, • Teladoc 24/7/365 Access to U.S. Board Certified doctors, • Employee Assistance Program, • Company Paid Life Insurance, • Supplemental Vision, Life, STD & LTD Insurance, • 401K- Company match up to 6% of base salary., • Health Savings Account (HSA) with available company match up to $2000 based on family size., • Paid Parental Leave Work Schedule: Monday- Friday, 8am- 4:30pm CAD/3D Drafting/Support Software • Read and interpret electrical drawings, technical drawings, and schematics at a high level., • Can create electrical design drawings using AutoCad Electric., • With some guidance from senior electrical engineers, able to work from project specifications, reference documents to update and/or create new electrical power and control design documents. • Can perform most electrical calculations for current and new designs with limited assistance., • Can update instrumentation and electrical and control portions of a P&ID drawings with little guidance., • Able to program PLC’s and HMI’s and can set up most PID loop designs with limited assistance from a senior electrical engineer. • Knowledgeable of MS Office and similar business related software and perform basic functions., • Competent in the use of Epicor and can add and mange BOM’s, perform required research to needed information and can assist with the management of project schedules. Problem Solving/Troubleshooting • Assists in leading a team of fellow engineers, designers, and drafters with resolving of a design challenge., • Can perform intermediate electrical trouble shooting and problem solving with some oversight. Teamwork/Collaboration • Interfaces with engineering staff, manufacturing staff, and operations staff in a productive manner to gain needed information to properly perform electrical design work. • Participates in engineering design meetings to learn and grow experience of design methods and processes., • Works closely with fellow engineers, designers, and drafters to improve quality and efficiency., • Guides entry level electrical designers and CAD drafters in the performance of their work., • Contributes to electrical design reviews for new and existing product designs. Requirements: Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience in Power Distribution (Power and Control), switchgear, PDU, transformers, and Manufacturing is preferred. Education/Experience: Bachelor’s degree in Electrical Engineering/Electrical Technology with 5-10 years of electrical design experience, or an Associate’s degree in Electrical Technology with 9-12 years of experience. Language Ability: Ability to read, interpret, electrical drawings and technical specifications, can understand basic electrical circuit diagrams, schematics, electrical blueprints and drawings. Can utilize reference tables to determine the definition of basic electrical symbols and design callouts. Can read, and understand production reports related to quality, and quantity. Must be able to write NCR’s and comply with safety rules. Must be able to establish productive and effective communication ties and relationships with co-workers, supervisors, customers, and staff. Math Ability: College level technical math. Certificates and Licenses: Professional Engineer or Engineering In Training Other Essential Duties • Punctual. Maintains regular and consistent job attendance., • Interfaces well with both internal and external customers., • Has advanced knowledge of the National Electric Code, IEEE standards, MSHA, and other applicable standards, and uses this knowledge to teach and grow members of the electrical team. • Follows and complies with IE Core Values., • Follow and comply with IE safety program including following IE’s Cardinal Safety Rules., • Must maintain a safe and clean work area at all times.

Job DescriptionDescription: The RMH Group has been making a difference in the world and our environment through engineering for over 60 years with our headquarters located in Lakewood, Colorado and a branch office in Phoenix, Arizona. RMH is growing and looking to add an electrical engineer team member with a minimum of 5 years of design experience. Our culture of learning and development will lead to quick growth as we place an emphasis on properly prioritizing work-life harmony while working on challenging engineering projects. Essential Job Responsibilities Proficient knowledge of the National Electrical Code Technical experience with AutoCAD, Revit, SKM Power tools, and electrical modeling software Power design of medium and low voltage, including panel schedules, layout, circuiting, and controls Perform load calculations, voltage drop, arc flash, and circuit breaker coordinator studies Design of electrical one-line diagrams and power distribution systems Design of lighting systems Develop electrical specifications and construction cost estimates Conduct periodic job site observations and quality control tasks Communication with project leads, clients, and contractors Skills Skilled in the use of Microsoft Office and CAD, BlueBeam, REVIT, SKM Power tools/ETAP/Easy Power, and AGI32 software Work collaboratively with other disciplines and coordinate with production staff Quality of Leadership Promotes positive attitude and image Exhibits goal-oriented behavior Shows fairness and consistency Shows good judgment and reasoning ability Takes initiative Requirements: • Bachelor’s Degree in Electrical Engineering or Architectural Engineering from an ABET accredited four-year college or university, • Minimum 5 years of experience in the MEP industry, • Professional Engineer Licensure would be ideal, • Must be authorized to work in the United States The pay range for this position is expected to be within a range of $80,000 - $125,000, based on multiple factors which include experience, skills, and industry knowledge. RMH is proud to be a part of Equal Employment Opportunity (EEO), Affirmative Action (AA), and M/F/V/D employer programs. We view every project as an opportunity to form a lasting partnership and we are committed to providing a culture that promotes balance, encouraging flexible schedules and hybrid work options that allow employees to make a bigger impact at work, at home and in the community.

Job Description Partner. Energize. Deliver. Join our Western Region team as a Project Engineer and become an employee of a nationally recognized Top Workplace! Guarantee Electrical Company has grown into one of the nation's foremost providers of electrical contracting services and systems solutions. Why Work for Us? Benefits, Compensation, Community Involvement and Employee Appreciation Each member of the Guarantee team is an essential partner in building our successful future. Guarantee offers a rewarding career path, a competitive salary, and excellent benefits package. This includes an Employee Stock Ownership Plan (ESOP), which is 100% company funded and employee owned. We own it! As employee-owners, we work with and for each other. We share a commitment to excellence and know that our efforts deliver exceptional results. We offer robust benefits with a competitive salary based on knowledge and experience. Employees are also eligible for annual discretionary bonuses. We offer a benefits package including medical, dental, vision, accidental, critical illness, life and disability insurances, vacation/sick time, and a matching 401K plan. Our GECO Gives program highlights our mission to give back to our communities through community outreach, philanthropy and volunteering. Some of our favorites being Pedal the Cause, KIDstruction, Big Brothers Big Sisters and more! Responsibilities: • Maintain organized project documentation using consistent filing systems and naming conventions, • Assist with drawing and specification control, ensuring current versions are properly tracked and distributed, • Prepare, track, and distribute basic submittals according to project requirements, • Organize and manage RFI documentation, ensuring clear questions and proper tracking of responses, • Support material and equipment management through effective tracking and vendor communication, • Assist with subcontractor management by documenting activities, workforce levels, and schedule progress, • Document project meetings with comprehensive notes capturing decisions and action items, • Support change order processes with thorough document control and distribution, • Organize project closeout by systematically collecting and submitting required documentation, • Perform and organize basic material quantity takeoffs, • Provide field coordination support with clear and timely communication, • Support project teams with coordination and tracking of off-site fabrication work scopes, • Apply lessons learned from project experiences and constructively incorporate feedback, • Participate in cross-departmental communications to support effective project delivery, • Follow established safety protocols and procedures to maintain a safe work environment, • Collect and organize project data accurately to support data-driven decision making, • Demonstrate interest in personal growth and development opportunities Work Environment: ☒Office ☐Non-Office Qualifications: • Associate's degree in construction management, engineering, or related field of study (or equivalent experience), • Basic understanding of construction processes and terminology, • Working knowledge of Microsoft Office applications, • Strong organizational and communication skills, • Ability to work collaboratively in a team environment, • Willingness to learn and develop professional skills, • Valid driver's license and ability to travel to project sites as needed Knowledge, Skills, and Abilities: Technical Skills • Understanding of basic construction terminology, documents, and project lifecycle, • Ability to maintain organized filing systems with consistent naming conventions, • Proficiency in tracking and managing submittals, RFIs, and change documentation, • Basic material quantity takeoff and verification skills, • Working knowledge of Microsoft Office Suite, Bluebeam (basic), and Viewpoint (basic) Core Competencies • Strong attention to detail and accuracy in all work products, • Excellent organizational skills for both physical and digital information, • Clear written and verbal communication, • Ability to prioritize tasks and meet deadlines consistently, • Adaptability when facing changing circumstances or priorities, • Reliable team support with a collaborative approach to problem-solving Professional Behaviors • Follows direction accurately and asks appropriate questions, • Maintains thorough, accurate records and provides clear status updates, • Demonstrates reliability, professionalism, and confidentiality, • Shows initiative in personal development and learning opportunities, • Adheres to established safety protocols and procedures All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. For more information about Guarantee Electrical Company, please visit www.geco.com

Job Description Prime Robotics is a premier provider of end-to-end automation solutions tailored for distribution centers and warehouses. Prime’s suite of robot and execution software solutions transform fragmented workflows, empowering clients to unlock operational productivity and efficiency. Committed to revolutionizing warehouse, supply chain, and factory operations, Prime strives to elevate businesses through best-in-class automation solutions and services. If you want to build hardware and software that physically changes how warehouses operate and see your work rolling across a live warehouse floor, Prime Robotics is the place to do it! Lead Electrical Engineer – Autonomous Robots We're looking for a Lead Electrical Engineer to own the electrical architecture and reliability of our autonomous mobile robots. You'll lead our China-based electrical team while partnering closely with software, mechanical, and field service teams to solve hard real-world problems and design the next generation of robot control hardware. Our robots operate in demanding industrial environments, integrating battery systems, motor drives, sensors, networking, and embedded control electronics. This role blends system architecture, hands-on troubleshooting, and engineering leadership. What You'll Do Electrical Architecture & System Design • Lead design of 48V/24V power systems including power distribution, DC/DC conversion, grounding, and fault protection, • Define power budgets, electrical safety strategies, and system-level protection schemes Team Leadership • Lead and mentor the China-based electrical engineering team, • Establish design standards for grounding, EMC, power integrity, and connector/harness reliability, • Coordinate between China engineering, US robotics teams, and manufacturing partners Troubleshooting & Field Reliability • Lead root-cause analysis of electrical failures in deployed robots — power instability, EMI, communication dropouts, grounding issues, and sensor failures, • Translate engineering findings into clear repair procedures field technicians can act on quickly, • Develop diagnostic tools and test procedures to improve fleet uptime PCB & Embedded Hardware • Review and improve PCB designs for power routing, decoupling, grounding topology, signal integrity, and transient protection, • Lead development of the next-generation robot controller integrating embedded computing, I/O, networking, and power distribution Communication Systems • Design and debug industrial communication systems: Ethernet, CAN bus, RS485, • Ensure reliable communication between sensors, controllers, and embedded computers What Success Looks Like: • Improved reliability and uptime across the current robot fleet, • Strong electrical design standards established across the China team, • Next-generation integrated robot controller delivered, • Field serviceability meaningfully improved Requirements What You Bring • 10+ years designing complex embedded electrical systems, • Deep expertise in power distribution, DC/DC systems, grounding, EMI/EMC, and electrical reliability, • Proven ability to diagnose difficult field failures using oscilloscopes, spectrum analyzers, and power analyzers, • PCB design or review experience: multi-layer boards, high-current layout, power integrity, • Experience with mobile robots, AGVs/AMRs, or industrial automation equipment, • Familiarity with Ethernet, CAN bus, and RS485/industrial protocols, • Experience leading or coordinating engineering teams, including across international sites, • Clear communicator — able to translate complex technical analysis for field service teams Bonus: Battery management systems, motor drive electronics, industrial safety standards (UL/CE/IEC), embedded firmware (C/C++) The expected minimum base salary for this role is $160,000 annually, informed by external market data. Actual offers will depend on factors such as the candidate’s experience, education, training, key or critical skills, and current market and business conditions. Benefits • Employer-subsidized medical, dental, and vision insurance plans to support your health and wellbeing., • Dedicated vacation and sick leave that allows you to recharge and take care of yourself when needed., • Invaluable hands-on experience with cutting-edge robotics technology that keeps your skills at the industry forefront., • A collaborative culture where innovation thrives, and your work has a real impact., • The excitement of contributing to transformative technology in a fast-growing industry. Our hiring process may incorporate AI-assisted tools to support activities such as application review, resume screening, and response evaluation. These tools are used to assist our recruitment team and do not make hiring decisions independently. All final decisions are made by a human reviewer. For questions about how your personal data is handled during this process, please don't hesitate to reach out to us. Prime Robotics is proud to be an EEOE, M/F/D/V, and we are committed to diversity both in practice and spirit at the corporate level. Prime Robotics participates in E-Verify. E-Verify is an Internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility.

Job Description PDS 10 / Power Delivery Substation This position is not eligible for recruiting or sourcing by outside parties. Disclaimer: Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates, Inc. Responsibilities • Works with program managers, project managers, and engineering manager to ensure resources are optimally place on projects., • Works with project managers to identify methods to improve project execution, work processes, and procedures to continually improve quality, productivity, and efficiency., • Proactively supervises staff by coordinating design tasks with project managers, project engineers, and project leads., • Ensures staff stay on task and perform duties within allotted timeframes., • Performs technical oversight and coordinates checking/reviews of deliverables and other project documents., • Responsible for the development and training of engineers, designers, and drafters within the group., • Conduct’s group meetings with staff as needed to communicate department and company objectives., • Approves timesheets and authorizes overtime and vacation. May also approve expense reports. Expectations • Maintains a collaborative environment within the group, ensuring all team members are contributing to the group’s success., • Demonstrates excellent communication and leadership skills., • Good interpersonal skills, able to build relationships and select team members for specific projects based on skill sets of individual staff members., • Is well organized and is well-versed in the design capabilities/limitations of all design team members with the group., • Creates an environment conducive to efficient workflow., • Shows initiative by taking on additional work responsibilities when the department or group is overloaded., • Establishes, promotes, and assures quality on all projects and work performed by the group., • Promotes a strong safety culture within the group and ensures staff incorporates safe work practices into all activities., • Candidate must be willing and able to report to office in either Knoxville, Chattanooga, or Lakewood twice a week. Qualifications • 4+ years experience in substation/utility design, with at least 2+ in protection and controls design., • Minimum bachelor’s degree in electrical engineering or related field., • Previous management experience is preferred, but not required., • Licensed professional engineer is highly preferred, but not required. Benefits • Paid Time Off, • Holiday Pay – 10 Days Annually, • Group Medical/Dental Insurance, • Life Insurance (Company Paid), • Disability Insurance (Company Paid), • 401(K) Retirement Savings plan, • 401(K) Matching Contribution, • Section 125/Cafeteria Plan, • Long Term Care Insurance, • Tuition Reimbursement, • Fitness Center Reimbursement, • Annual Performance Bonus, • 9/80 Work Schedule Option, • FSA and HSA Options Annual Salary Range $88,590.00 - $100,800.00 The expected compensation is a range determined by factors including but not limited to education, experience, and qualifications of the candidate, internal equity, work location, and hiring department’s fiscal resources. Notice to External Search Firms: Mesa Associates, Inc. and its subsidiaries do not accept unsolicited resumes and will not be obligated to pay a placement fee for unsolicited resumes. Mesa Associates, Inc. Talent Acquisition engages with approved search firms directly for specific hiring needs.

Job Description Who We Are: Prime Robotics is a premier provider of end-to-end automation solutions tailored for distribution centers and warehouses. Prime’s suite of robot and execution software solutions transform fragmented workflows, empowering clients to unlock operational productivity and efficiency. Committed to revolutionizing warehouse, supply chain, and factory operations, Prime strives to elevate businesses through best-in-class automation solutions and services. If you want to build hardware and software that physically changes how warehouses operate and see your work rolling across a live warehouse floor, Prime Robotics is the place to do it! About The Role: Prime Robotics is looking for an experienced Principal Hardware Engineer who works across three modes depending on where the urgency is: fix, build, and design. Fix: • Our robots are in warehouses now, running real operations. We have reached the point where we are moving from reactive fixes to root cause engineering, and we need someone to lead that shift., • You will own reliability at the engineering level. That means working directly with field technicians to understand what is breaking, diagnosing why it is breaking, and driving changes that prevent it from happening again., • The problems are primarily electrical: wiring, grounding, PCB robustness, and power systems. There is real, meaningful work here for someone who wants to leave a clear mark on a hardware product. Build: • We are actively building robots right now, including nearly 50-unit deployment in a freezer environment. Build quality and electrical integrity on robots coming out of Denver production is part of your scope. Design: • You will work directly with our China engineering team to improve PCB and electrical system designs: grounding schemes, EMI resilience, connector selection, and environmental sealing., • The goal is a fleet that stays running in real warehouse conditions, not just hardware that passes a bench test., • This is a hands-on role where you’ll be expected to do engineering work. What You Will Own: Fleet Reliability: Fix Mode • Work alongside field technicians to understand what is failing, in what conditions, and how often, they are your primary source of signal., • Diagnose complex electrical failures: wiring faults, grounding problems, PCB issues, power system failures, sensor degradation in harsh environments., • Prioritize which failures matter most to customer uptime and drive the engineering decisions that fix them at the root., • Establish diagnostic standards and repair methodology the field team can execute consistently., • Track bad-fix rates and first-visit resolution; use that data to drive design improvements. Production Quality: Build Mode • Own electrical quality on robots being built in Denver, wiring standards, grounding practices, inspection criteria., • Support the Arctic RackBot build for freezer deployment: ensure electrical systems are robust for -10°ree;F continuous operation., • Work with assemblers to catch issues during build rather than after deployment. Hardware Design for Reliability: Design Mode • Partner with our China R&D team to improve PCB designs for robustness, this is one of the highest-leverage things we can do for long-term fleet reliability., • Drive design improvements in wiring harnesses, connector choices, grounding architecture, and environmental protection., • Contribute to next-generation robot variants including RackBot 2.0 and MobilePallet improvements ., • Apply design-for-reliability thinking, reduce failure modes before robots ship rather than fixing them in the field. International Team Coordination: • Lead our international engineering team on hardware development, this requires regular evening availability to overlap with China time zones., • Bridge the gap between what the field is experiencing and what the China team is designing; you are the translation layer., • Review and provide feedback on designs coming from China with a reliability and field-serviceability lens. Requirements About You: • Deep electrical systems fluency, wiring, grounding, PCB-level diagnosis, power systems, EMI. This is the core technical requirement for this role., • Experience with autonomous robots or complex electromechanical systems deployed in real-world environments, not just lab or prototype work ., • Ability to sit down with a field technician, understand what they are seeing, and make good engineering judgments about root cause and priority., • Hands-on orientation, you are comfortable doing the work yourself, not just reviewing others' work. Strong Preferences: • Experience with robots operating in harsh environments: temperature extremes, dust, vibration, and wet conditions., • Background in designing for reliability, not just performance, connector selection, harness design, grounding schemes, environmental sealing., • Familiarity with AMR or AGV systems: navigation, motor control, sensor integration., • Experience working with Chinese engineering and manufacturing teams, understanding the culture and how to drive results across time zones is a genuine advantage., • Design-for-manufacturing mindset: you think about how a design will be built and serviced, not just how it will perform. Honest Expectations: • Most robotics companies in the US do not have fleet sizes like ours — we are not expecting you to have done this exact job before. We are looking for transferable experience from adjacent fields: agricultural robotics, industrial automation, EV systems, defense robotics, or similar., • The first months will require wearing multiple hats. The scope will narrow as the team grows around you., • This position is based in Lakewood, CO and our lab located in Denver, CO. Our expectation is that the successful candidate will be onsite five days a week., • This position will report to the CEO. Prime Robotics is an Equal Opportunity Employer. The expected base salary range for this role is $180K–$240K annually, plus equity, informed by external market data. Actual offers will depend on factors such as the candidate’s experience, education, training, key or critical skills, and current market and business conditions. Benefits • Employer-subsidized medical, dental, and vision insurance plans to support your health and wellbeing., • Dedicated vacation and sick leave that allows you to recharge and take care of yourself when needed., • Invaluable hands-on experience with cutting-edge robotics technology that keeps your skills at the industry forefront., • A collaborative culture where innovation thrives and your work has a real impact., • The excitement of contributing to transformative technology in a fast-growing industry.

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 75+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US Position Snapshot: Civil/Structural Engineer – Oil & Gas Atwell is seeking a licensed Civil/Structural Engineer (PE) with experience supporting structural design and engineering for the Oil and Gas industry. Our current project portfolio includes oil and natural gas, CO₂, hydrogen, and renewable natural gas (RNG) pipelines, terminals, compressor stations, and processing facilities. In this role, you will be responsible for leading and executing civil and structural engineering efforts, ensuring alignment with project scope, schedule, budgets, client expectations, and applicable codes and standards. This position involves developing engineering documentation from concept through construction, overseeing structural analyses, mentoring junior team members, and coordinating across disciplines to support successful project execution. You will play a critical role in the design of reinforced concrete foundations, structural steel platforms and supports, equipment skids, and pipeline structural systems. Roles and Responsibilities: • Lead the civil and structural engineering design for oil and gas infrastructure projects, including pipelines, pump stations, compressor stations, terminals, and process facilities, • Develop construction documents, including structural plans, general arrangements, framing plans, and connection details for steel and concrete structures, • Conduct structural analysis under various loading conditions including wind, seismic, blast, and equipment loads in accordance with applicable codes (IBC, ASCE, AISC, ACI, API, etc.), • Review and approve engineering calculations, drawings, and reports prepared by internal teams and subcontractors, • Collaborate with multidiscipline teams including mechanical, piping, and electrical to coordinate structural requirements across project phases, • Perform field visits to verify as-built conditions, gather site data, and provide construction support as needed, • Provide mentorship to junior engineers and support team development through technical leadership, • Monitor project schedules, budgets, and resource allocations to ensure deliverables are met on time and within scope, • Support quality assurance by implementing Atwell's QA/QC procedures and best practices Job Requirements: • Bachelor's degree in Civil or Structural Engineering from an ABET-accredited institution (Master's a plus), • Professional Engineer (PE) license required, • 7+ years of experience in civil/structural engineering for oil and gas facilities or similar industrial infrastructure, • Proficient in structural analysis software such as STAAD.Pro, RISA, SAP2000, or similar, • Working knowledge of CAD software tools including AutoCAD, CADWorx, and Civil 3D, • Familiarity with Autodesk Inventor, Navisworks, or Tekla Structures is a plus, • Strong knowledge of applicable design codes: AISC, ACI, ASCE, API, IBC, • Proficient in Microsoft Office Suite (Word, Excel, Outlook) Pay Range - $100,000 - $150,000 base+, + end of year bonus. Disclaimer While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-TK1 Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Tenure Awards — Travel Vouchers to see the world based on your travel preferences Compensation: • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Dependent Care Match 'Atwell'ness: • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description (Hybrid) Description Interested in a role where you can travel extensively and be at the center of real-world engineering work? In this position, you will spend your time at customer sites solving problems in the field and helping bring complex systems to life. This travel-focused role includes additional compensation and benefits designed to support a project-based schedule. About DMC DMC is a leading engineering consulting firm delivering high-caliber engineering and custom software solutions to clients around the world. We specialize in innovative systems for manufacturing, testing, and product development across industries including aerospace, consumer products, healthcare, and more. Our engineers work at the forefront of emerging technologies, building practical, high-impact solutions in fast-paced environments. We prioritize technical excellence and foster a collaborative culture that supports both independent ownership and team-based problem solving. This role is for any entry level engineer (0-3 years of experience). We have an exceptional onboarding and training program to help align your skillset with our technical offerings. Responsibilities: • Understands complex system designs including ability to troubleshoot electrical and mechanical systems, • All engineers at DMC focus on programming and software solutions, such as:, • Controls programming including food and beverage processing and packaging, automotive assembly lines, and packaging machinery controls, • Develop automated test systems for a variety of industries and applications, including, EV battery test systems, aerospace and rocket test, turnkey test system, and cloud-enabled test and measurement systems, • Collaborate with project teams of varying sizes and experience levels, • Assist senior engineers in scoping, estimating, and proposing new projects, • Manage tasks with project teams, prioritizing needs and addressing risks and roadblocks, • Consult with clients on status updates, maintaining positive rapport while addressing requests, • Travel to customer manufacturing sites for solution commissioning, including troubleshooting electrical and mechanical systems, • Develop and grow leadership skills Note: This role is designed for engineers interested in 90% - 100% travel, with the majority of time spent onsite at customer facilities. Vacation accrual is higher than our typical engineering positions. Requirements Must be authorized to work in the U.S. without employer sponsorship now or in the future. • Bachelor's degree in Mechanical, Electrical, Computer Engineering, or related field, • Minimum GPA of 3.4, • Strong background in mechanical and/or electrical engineering fundamentals, • Interest and ability to program in text-based languages and object-oriented concepts, • Quick learner with a strong desire for continuous improvement, • Strong written and verbal communication skills for internal and external collaboration, • Ability and willingness to travel 90% - 100% for your first 18 months at DMC, • After 18 months, there will be an option to transition into a standard engineering role with 30%-40% travel, • Access to a reliable vehicle for work-related travel ITAR Requirements To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at DMC must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158. Additional Information: • Benefits/Culture/Bonuses and More!, • Office Locations, • DMC Website, • Engineering Blogs, • Additional Career Opportunities #LI-Hybrid Compensation is based on relevant experience, industry and location standards. Salary Range$89,000—$101,000 USD

Job DescriptionDescription: Intermountain Electronics (IE) is a leading provider and manufacturer of custom engineered Process, Electrical Control and Power Distribution turn-key solutions to the Data Center, Industrial, Power/Utility, Oil & Gas, Mining industries in North America. Our products range from large scale one-off custom Power Distribution, Control and Process systems to standard off-the-shelf electronic/electro-mechanical components. Reporting directly to the Engineering Manager we are currently seeking a Manufacturing Engineer for our Day Shift to be based at our Denver facility. Why you will love working at IE You will love the challenge, interesting and varied work, and endless opportunities, but most importantly you will love working with a team of fun loving, driven, and generous go getters that take deep personal pride in being part of a family that is building the infrastructure that powers the world. Job Description Job Title: Manufacturing Engineer Job Status: FULL TIME Benefits: • Competitive salary, • PTO (Paid Time Off), • Paid Holidays (10), • Medical and Dental Plans, • Teladoc 24/7/365 Access to U.S. Board Certified doctors, • Employee Assistance Program, • Company Paid Life Insurance, • Supplemental Vision, Life, STD & LTD Insurance, • 401K- Company match up to 6% of base salary., • Health Savings Account (HSA) with available company match up to $2000 based on family size., • Paid Parental Leave Position Summary: A Manufacturing Engineer is responsible for designing, improving, and managing manufacturing processes to ensure products are produced efficiently, safely, cost-effectively, and with high quality. Work Schedule: Monday- Friday, 8am- 4:30 pm Collaboration • Confer with engineers, Project Managers or other staff to document best design, implement operating procedures, resolve system malfunctions, or provide technical information., • Work closely with manufacturing to improve quality and efficiency. Other Essential Duties • Participate on the QMS team., • Maintains regular and consistent job attendance, comes to work on time., • Follows and complies with IE Core Values., • Follow and comply with IE safety program. Must maintain a safe and clean work area at all times.Requirements: Knowledge, Skills and Abilities • Construction or Manufacturing Background is preferred., • 3 to 5 years' experience is preferred., • BSME or equivalent engineering education from an accredited four-year college or university., • Computer knowledge of AutoCAD 2008, 3-D Solid Modeling, Solid Edge/Solid Works/ Inventor 2008, Excel, MSWord and Outlook., • Design and optimize manufacturing processes and production workflows., • Develop and implement process improvements to increase productivity and reduce costs., • Analyze production data and identify opportunities for efficiency improvements., • Good mechanical, analytical, and technical skills., • Good administrative, interpersonal, and communication skills., • Confident with the ability to work closely with employees, peers and management while keeping production flowing and meeting due dates., • Troubleshoot manufacturing issues and implement corrective actions., • Support the introduction of new products into manufacturing (NPI)., • Ensure compliance with safety and quality standards., • Conduct root cause analysis and apply continuous improvement methodologies such as Lean Manufacturing and Six Sigma., • Monitor production performance indicators and recommend improvements., • Complete structural or mechanical analysis of manufactured equipment in compliance with AISC, IBC, and other applicable codes., • Collaborate with design, quality and production teams to ensure smooth operations., • Ability to collaborate with engineering project team and shop personnel to ensure successful completion of projects., • Attention to detail with emphasis on drawing specifications., • Ability to be self-directed and self-motivated with minimal supervision., • Ability to handle multiple priorities efficiently and meet strict timelines., • Ability to work in a team environment with diverse team members., • While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear., • The employee is frequently required to stand and walk. The employee is occasionally required to sit and taste or smell and to stand and work on concrete floor for extended periods of time. Required Skills • Knowledge of manufacturing processes, production systems, and industrial engineering principles., • Proficiency in CAD software, solid works, solid edge, and manufacturing technologies., • Understanding of Lean Manufacturing, Six Sigma, and continuous improvement techniques., • Strong analytical and problem-solving skills., • Project management and teamwork abilities., • Knowledge of quality management systems and statistical process control (SPC). Qualifications • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, or a related field., • Experience in manufacturing environments (varies by employer)., • Certifications such as Lean Six Sigma may be advantageous. Work Schedule: Must be able to work a 40-hour work week and additional time as required. Disclaimer: An offer of employment with Intermountain Electronics is conditional upon the successful completion of a background check and drug screen, subject to applicable laws and regulations. Intermountain Electronics, Inc. is an Equal Opportunity Employer

Job DescriptionDescription: Is your passion designing complex power systems? Do you enjoy working with clients and team members to solve problems? Swanson Rink has over 50 years of expertise in Data center engineering, and we are continuing to grow our team. Swanson Rink’s Senior Electrical Engineer’s partner with our clients and team members to execute highly technical mission critical projects. This position is the technical lead for specific clients including hyperscale, colocation and enterprise. At Swanson Rink, our engineers are supported by specific Project Management and BIM staff allowing our engineers for focus specifically on developing engineering solutions for our clients. Get to Know Us: INTEGRITY | ENGINEERING EXCELLENCE | LEGACY Founded in 1949, Swanson Rink specializes in designing mechanical, electrical, fire protection, plumbing and technology infrastructure for data centers, airports and other complex buildings. Ranked among Building Design + Construction top Engineering Firms for both Airport and Data Center design four years running! Our Impact: Swanson Rink provides endowed scholarships to support engineering students, invests hundreds of hours a year in employee training and development, and we encourage our team to Cultivate Curiosity through a monthly presentation series led by team members on the latest issues and trends facing our clients. Follow us on LinkedIn! What Can We Offer You for All Your Hard Work? • The opportunity to work on complex, exciting projects for high profile clients, • Focused training and professional development, mentorship, professional career growth opportunities, • Paid professional membership fees, tuition reimbursement, prep and exam coverage for certifications and licenses, • EcoPass/Commuter benefits (Denver), • Company paid holidays, Paid Time Off, paid parental leave, • Vision, dental and medical insurance with employer HSA contributions, FSA options, • Monthly technology allowance, • Traditional and Roth 401(k) with immediate vesting on matching contributions, • Stock purchase plan and stock grant programs At Swanson Rink, we believe the people who build this company should share in its success. That's why we offer stock incentive plans to every employee, with opportunities that grow with your tenure. Ownership isn't just a title here — it's something you earn and carry forward. Your Job Responsibilities: • Be the technical lead for the electrical engineering and design of high-tech facilities, including new data centers, facility expansions, and system upgrades., • Create power design for complex electrical systems including UPS and generator support systems., • Have expertise in power distribution, grounding, standby power, uninterruptible power, and related systems., • Possess proficiency in the development of electrical one-lines, specifications, calculations, studies, and software-based systems analysis., • Have a strong understanding of building systems and inter-discipline coordination., • Be comfortable leading, mentoring, and delegating portions of design work to project engineers, designers, and BIM/CAD staff. Requirements: Your Requirements and Qualifications: • A Bachelor's Degree in Electrical Engineering from an ABET accredited four-year college or university., • Registration as a Professional Engineer., • This position requires a strong understanding of the mission critical industry and the nuances of renovation and greenfield construction projects., • Experience designing of medium voltage, power monitoring, lighting, and lighting controls systems a plus., • Must be available to travel occasionally., • Requires the ability to pass background checks, security screenings or drug testing as required by our clients and/or Federal contracts., • Must be authorized to work in the United States. Salary range of $140,000 - $160,000+ and will be based on several factors including experience, knowledge, skills, and abilities of the applicant. Equal Employment Opportunity/Veteran/Disability Note to Staffing Firms: To protect the interests of all parties, Swanson Rink does not accept unsolicited resumes from any source other than directly from an applicant or from an approved vendor with a fully executed written agreement. Swanson Rink is not responsible for any placement fees associated with unsolicited resumes.

Job Description • LOCATION: East Denver, Hale Neighborhood, near Lindsley Park., • SCHEDULE: Monday - Friday: 7:00 am - 4:00 pm. Rotating On call, • PAY RATE: $85,000 - $90,000 About us Worth Ross Management Company (WRMC) is an award-winning leader in luxury multifamily and HOA management. We are known for delivering exceptional service, maintaining high standards, and creating welcoming communities where residents truly feel at home. Our teams are the heart of our success, and we value professionalism, attention to detail, and a genuine commitment to service. About the Role We are seeking an experienced Building Engineer to oversee the maintenance, performance, and reliability of building systems within a luxury residential high-rise community. This role is responsible for ensuring the property's mechanical, electrical, plumbing, HVAC, and life safety systems operate efficiently while leading preventative maintenance programs, coordinating vendors, and supporting the General Manager in maintaining the highest standards of safety, compliance, and resident satisfaction. What You'll Do • Oversee the operation and maintenance of all building systems, including HVAC, electrical, plumbing, fire/life safety, elevators, and mechanical equipment., • Develop and manage preventative maintenance programs to maximize equipment performance and longevity., • Supervise maintenance staff, contractors, and vendor activities while ensuring quality workmanship and safety compliance., • Coordinate inspections, repairs, and capital maintenance projects throughout the property., • Monitor building performance, conduct energy efficiency evaluations, and recommend operational improvements., • Maintain accurate maintenance records, inspections, and documentation., • Respond to building emergencies and participate in an on-call rotation as needed., • Perform minor repairs, painting, and cosmetic maintenance when necessary., • Build strong relationships with residents, vendors, and management while delivering exceptional customer service. Requirements What You Need to Succeed • 3–5+ years of engineering or building maintenance experience, preferably in a high-rise residential, commercial, or hospitality environment., • Strong knowledge of HVAC, electrical, plumbing, mechanical, elevator, and fire/life safety systems., • Experience developing and managing preventative maintenance programs., • Ability to read and interpret building plans and technical drawings., • Knowledge of building inspections, OSHA regulations, and safety compliance., • Experience with cooling towers, water-source heat pumps, domestic water systems, sump pumps, fire pumps, and trash compactor systems., • Experience coordinating vendors and contractors while maintaining high service standards., • Familiarity with BuildingLink or similar property/facility management software is a plus., • Strong leadership, communication, troubleshooting, and organizational skills. Benefits • Medical, • Dental, • Vision, • Short term disability (STD), • Long term disability (LTD), • Employee assistance program (EAP), • Identity theft protection, • Pet insurance, • Retirement, • Paid Time Off (PTO), • 401K

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: We are seeking an ambitious and experienced Senior Staff Electrical Engineer (Substation) to support the electrical scope of projects for our Power systems. This critical role will drive project execution, ensuring all electrical systems meet the highest standards of quality, safety, and performance. You will collaborate closely with cross-functional teams, execute within project timelines and budgets, and contribute to the successful deployment of cutting-edge technology solutions. 100% on-site in Denver, CO (255 Filmore Ave), Open to supporting relocation. What You’ll Be Working On: Project Planning & Execution Support: Support the development and execution of comprehensive project plans, including technical design and material specifications. Ensure absolute alignment between project budgets and critical-path schedules. Electrical System Design & Engineering: Contribute to the design and specification of electrical systems for large-scale power projects. This includes power generation equipment, transformers, and the full spectrum of low, medium, and high-voltage cabling and wiring. Technical Documentation: Develop and review high-fidelity technical documentation, engineering drawings, and specifications to ensure "production-ready" designs. Regulatory Compliance: Ensure all electrical designs and installations comply with relevant safety standards, local/national codes, and global regulations. Procurement Management: Manage the end-to-end procurement of specialized electrical equipment, working closely with vendors to ensure quality and lead-time requirements are met. Installation & Commissioning Oversight: Oversee the physical installation and commissioning of electrical systems at field locations, both domestically and internationally, ensuring systems are "live" and operational per specifications. Stakeholder Communication: Contribute to regular project status meetings and provide clear, effective technical communication to cross-functional stakeholders. What You’ll Bring to the Team: Education & Experience: Bachelor's degree in Electrical Engineering or a related field. Industry Experience: Proven experience in industrial environments, with a preference for experience in power generation and distribution. Technical Expertise: Electrical Engineering Knowledge: In-depth knowledge of electrical engineering principles, including power systems, control systems, and electrical safety standards. Equipment Expertise: Experience with electrical equipment design, procurement, and installation. Industry Standards: Familiarity with relevant industry codes and regulations (e.g., NEC). Team Participation: Proven ability to be a contributing member in a high performing team Analytical & Organizational Skills: Strong analytical, problem-solving, and organizational skills. Communication & Interpersonal Skills: Excellent communication, interpersonal, and presentation skills. Attention to Detail: Strong attention to detail and a commitment to quality. Travel Flexibility: Flexibility to travel to field locations up to 25%, or as required. Safety-Sensitive Position: This position is designated a safety-sensitive position and/or is located in a safety-sensitive facility. Drug and alcohol program participation is required. Bonus Points: Professional Engineer License Experience with renewable energy technologies. Familiarity with SCADA systems and data acquisition. Benefits: Competitive compensation and equity packages Restricted Stock Units Paid time off, paid holidays & leave of absence programs Comprehensive health, dental & vision insurance Employer contributions to HSA account Paid parental leave Paid life insurance, short-term and long-term disability Professional development & tuition reimbursement Mental health & wellness support Commuter benefits (parking & transit) Cell phone stipend 401(k) Retirement plan with company match up to 4% of salary Volunteer time off Global travel insurance & emergency assistance Daily meals allowance Additional perks & programs specific to location Compensation: Salary will be paid in the range of $179,000 - $205,000 + Bonus. Restricted Stock Units are included in all offers. Salary to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Wunderlich-Malec Services (WM) is a 100% employee-owned ESOP and one of the largest and most well-established engineering companies in the United States. When you join WM you become part of a company that is: • 100% employee-owned with 40+ years of industry history, • A Top 5 Systems Integrator Giant, • An ENR Top 500 Firm We have a Senior Commissioning Engineer position available in Denver, CO. The Senior Commissioning/Testing Engineer will be responsible for testing/commissioning Transmission and Distribution substations additions or modifications are installed, function, and energized correctly. This position is responsible for leading the testing and commissioning of electrical equipment within an electrical substation or generator plant. Performing and directing all aspects of electrical testing including, but not limited to, protection relays, circuit breakers, transformers and other substation equipment. Senior Engineer is responsible for training new engineers/technicians in relay testing, equipment testing and substation commissioning. Responsibilities also include: Major Responsibilities This position requires the Commissioning Engineer to provide testing and commissioning services along with engineering to the Utility Substation and Generation Stations. Responsibilities include: • Review specifications and engineering drawings to understand the purpose and functionality of substation, • Directly witness or perform critical tests such as DC Functional Trip Testing prior to energization and in-service, • Direct crews as necessary during critical work junctures (final commissioning and through startup), • Perform all electrical testing including but not limited to P&C control equipment, • Demonstrate ability to service newly designed and experimental equipment, which has not been seen after, and instill confidence in the customer, • Assist field crews and dispatch in developing switching to properly sequence in equipment, making sure proper hold points for testing are incorporated, • Monitor the construction and be available to address technical questions as they arise during construction, installation and testing., • Management of resources and services required to install electrical equipment, • Demonstrate safety consciousness in equipment handling, electrical and electronic procedures, and the unique situations encountered at diverse work sites, • Maintain all service equipment including all test equipment, tools issued to meet specifications including ISO requirements, etc. in good working condition and maintain sufficient inventory to respond to standard calls, • Develop and maintain strong working relationships with customers, demonstrates an awareness of customer needs, preferences, and time and financial constraints, • Proven customer service, sales ability, and ability to handle difficult customers and gain their satisfaction, • Assists in the development of estimates for client proposals, • Near project completion, as the equipment is ready to have its control schemes functionally tested and the equipment energized, commissioning engineer will likely be required to work extended hours/days in a row at a particular job site, • Knowledge of programming and testing protection relays from GE, SEL, ALSTOM, SCHNEIDER, SIEMENS, and ABB. Ability to develop programming macros for use in automated relay testing, • Ability to understand AC and DC elementary diagrams, wiring diagrams and one-line drawings for the purpose of understanding system operation and developing testing requirements and procedures, • Develop standard testing documentation, training procedures and maintain all project documentation including certifications and calibration records. Candidate should be able to obtain NICET certification or equivalent Ideal Candidate Qualifications • Proven ability to motivate, mentor, and optimize in a collaborative, team-oriented environment, • Goal oriented and focused, • Strong drive, energy, enthusiasm, and proactive style, • Experience managing technical projects of various sizes, • Excellent communication (written and oral) & interpersonal skills, • Proven ability with problem solving and decision making, • Strong organizational, multi-tasking, & time-management skills, • Strong budget management skills, • Diverse skill set with the ability to work independently. Will act to guide less experienced engineers/technicians. May also act as Commissioning Engineer on projects Job Requirements Education A Bachelor’s degree in engineering (electrical, mechanical or engineering technology) from an accredited institution is preferred. Experience A minimum of 6-15+ years testing & commissioning experience should include: • In-depth understanding of three-phase power systems, • In-depth understating of protection and control schemes and implementation, • In-depth experience utilizing relay test sets with various relay vendors including SEL, GE, Beckwith, ABB, Basler, etc. and various manufacturers of electromechanical relays, • In-depth understanding of equipment testing - circuit breakers, transformers, circuit switchers, MOABS, CTs, PTs, batteries & chargers, transfer switches, line tuners, wave traps, carrier relays, etc., • In-depth experience executing in-service power measurements (load checks), • Experience leading crews to test and commission new and modified substations including equipment isolation/restoration and complex circuit cutovers being mindful to mitigate inadvertent operations, • Experience with rotating machinery, including generators and excitation systems, • Experience testing previously programmed RTUs locally and remotely to system operators, • Experience with SCADA, RTU, and DFR systems Travel Ability to travel a minimum of 50%. Driver’s License Must possess and maintain a valid and unrestricted driver’s license. Physical Demands of Position Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling, warm and cold temperature conditions, sun exposure, moisture, potential exposure to hazardous materials and electrical voltages. Working Conditions Standard office work, work-from-home, and in the field leadership: On site environment could require work in various temperature conditions; in and/or around moisture, on slippery and/or uneven surfaces, in confined spaces, and at heights; will require frequent standing, driving a 4-wheel drive vehicle, and occasional bending, squatting, climbing, twisting, balancing, and reaching; will have exposure to noise, vibrations and chemicals. May require irregular or extended hours, subject to being on call and travel for project completion. *Job Descriptions are not exhaustive lists of all skills, responsibilities, or efforts associated with a job. They reflect principal job elements essential for performing the job and evaluating performance Wunderlich-Malec is proud to offer a comprehensive employee-owner benefit package. Full-time employees may be eligible for the following benefits: Medical • Dental • Vision • Basic and Supplemental Life and AD&D • Long Term Disability • Voluntary Short Term Disability • Healthcare & Dependent Care Flexible Spending Accounts • Health Savings Account • Paid Time Off (PTO) • Paid Holidays • Tuition Reimbursement • Referral Bonus Program • 401(k)/Profit Sharing • 100% ESOP (Employee Stock Ownership Plan) • Employee Assistance Program • Will Preparation Resources • Worldwide Travel Assistance Salary Range The expected pay range is $115,000 to $150,000 based on experience and qualifications plus a discretionary bonus and employee stock program. #LI-WM1

Job DescriptionPrimary Purpose:To manage pipeline integrity projects, O&M projects, and small capital projects. Provide technical support in all areas of pipeline systems and to be a technical resource to the company in support of projects and compliance with regulations and company standards. Essential duties and responsibilities: • Efficiently oversee the planning, scheduling, management, and reporting of multiple capital and maintenance projects across various deadlines and levels of responsibility. Such projects include new pipeline construction, pipeline replacement, inline inspection, pipeline integrity remediation, pressure testing, compression, automation and controls, measurement, corrosion, gas processing, pipeline interconnects, encroachments etc., • Develop project scope documents while tracking, managing, and reporting any increases and decreases to project scope., • Manage several contractors and consultants simultaneously such as inspectors, engineering consultants, surveyors, material suppliers, general contractors, Non-Destructive Examination (NDE) contractors, line stopping and hot tapping contractors, cross compression contractors, In-Line Inspection (ILI) consultants, etc., • Engineer pipeline and facility designs for small projects such as pipeline replacements, pipeline re-routes, pig traps, and minor station piping modifications., • Oversight and engineering of pipeline defect assessments and repairs., • Develop project schedules, cost estimates and budget forecasts as required with minimal direction from supervisor., • Develop Request for Proposal (RFP) bid documents for construction projects and materials, etc., conduct bid process, prepare detailed bid analysis, select successful contractor., • Provide technical expertise to various internal and external customers and provide engineering and project management support to field operations as necessary., • Provide technical guidance on the application of industry codes and standards as well as federal regulations governing hazardous pipeline design and construction., • Develop and/or update Company engineering, material and equipment specifications and standards., • Manage projects per Company and OSHA safety standards and Company engineering, construction and operating/maintenance standards and procedures., • Collect, review, organize and publish project and compliance related documentation into project job books that will be audited by regulatory agencies and retained for the life of the asset., • Participate in design reviews for large capital projects as required., • Participate in industry research groups as required., • Collaborate with a wide variety of people with tact, courtesy, and professionalism., • Communicate clearly and effectively, both in person and over the phone, demonstrating strong verbal skills and active listening., • Regular, dependable work attendance and a fully competent level of performance is expected., • Will work non-traditional hours as needed., • Maintain a high regard for personal safety, for the safety of company assets and employees, and the general public., • Other daily, weekly, monthly, or special project duties as identified and defined., • Other duties as assigned. Minimum requirements:Education: • Bachelor’s degree from an accredited institution in Engineering. Experience/Specific Knowledge: • A minimum of 2-6 years experience in engineering., • Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience and skill sets of the successful candidate., • Intermediate proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint, Visio, and Outlook. Certifications, Licenses & Registrations: • Must possess and maintain a valid driver’s license and a driving record satisfactory to the company and its insurers (for travel). Competencies, Skills & Abilities: • Knowledge of the natural gas and oil transmission industry, pipeline/facilities design, construction, operation and testing., • Proficiency in basic engineering skills., • Proficiency in basic project management skills., • Familiarity and ability to read and interpret electrical and mechanical blueprints and diagrams, including flow charts, cause/effect diagrams, and Piping and Instrument Drawings (P&IDs)., • Familiarity with pipeline and facility design calculations and equations., • Familiarity and ability to read and interpret basic GIS information and maps., • Knowledge of ROW, EHS and regulatory clearances for pipeline projects., • Must be able to work with a team, take direction from management, adhere to required work schedules, focus attention on details, and follow work rules., • Ability to organize and prioritize work to successfully perform work on simultaneous projects and tasks to meet deadlines., • Job level commensurate with experience and skill sets; position will be filled depending on qualifications, experience and skill sets of the successful candidate. Physical Demands:All of the physical requirements listed below are those that may be necessary for an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Minimal safety hazards; general office working conditions., • Must be able to sit for prolonged periods of time., • The employee is regularly required to use hands to type, touch, handle, or feel. The employee is required to talk and listen. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk and climb or balance. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 25 pounds., • Ability to work in varying, sometimes extreme, weather conditions as needed during field work., • Field activities may include walking to and amidst work and/or construction sites, climbing in and out of trenches, working around heavy equipment and working in confined spaces. Working Conditions: • Frequent overnight travel may be required., • Overtime and/or extended work hours may be required depending on the project., • Required to carry a cell phone and be available to respond during working and non-working hours., • The successful candidate will be required to clear a drug screen and a complete background check, including credit report for certain positions, after an offer has been extended and prior to being employed. Supervisory Responsibility: • None PREFERRED EDUCATION, EXPERIENCE, CERTIFICATIONS, COMPETENCIES, SKILLS, & ABILITIES: Over and above the minimum requirements; these are not required but advantageous for this position: • Specific experience in project management, engineering, design and construction of pipeline, compressor, and meter station facilities., • Knowledge of pipeline operation., • Knowledge and experience with pipeline and facility pressure testing., • Knowledge and experience with stress engineering calculations., • Knowledge and experience with Over Pressure Protection (OPP) sizing and review., • Knowledge and experience with welding procedures application, welder and procedure qualification., • Familiarity with weld inspection, visual and NDE such as RT, MT, UT, and PT., • Experience and knowledge of pipeline integrity, ILI tool runs and pipeline defect assessment and repair., • Familiarity with Remaining Strength (RSTRENG) calculations and programs., • Experience in investigation and root-cause determination of pipeline and equipment failures., • Advanced proficiency level in MS Office applications that may include but are not limited to Excel, Word, Access, PowerPoint, and Outlook., • Knowledge and/or application experience with industry standards (DOT 49CFR192 and 195, API, ASME B31.8, B31.8S, B31.4, B31.3, Section VIII, Section IX, all the B16’s, ANSI, NACE, NEC, MSS-SP-44, SP-75, SP-97, etc.)., • Registered engineering intern (EI), • Registered professional engineer (PE) Compensation:The salary range for this role is $85,500-$128,550/year About UsTallgrass was named one of the Top Workplaces USA and highlighted in Colorado's Top Workplaces for the past seven consecutive years. Tallgrass is a leading energy infrastructure company focused on safely, reliably, and sustainably delivering the energy and services that power our nation and enable our quality of life. At Tallgrass, we value our teams and strive to create an environment where employees feel respected, and their contributions are valued. We aim to support employees' physical, mental, and financial well-being through a comprehensive Total Rewards Program. • Industry competitive pay., • Health insurance package options that include Flexible Spending & Health Savings Accounts., • Infertility Coverage., • Parental Leave., • 401(k) with up to a 6% match that vests immediately plus an employer discretionary contribution of up to 4%., • Wellness Programs and Mental Health Resources., • Employer-paid life insurance, short-term disability, and long-term disability coverage., • Critical Illness & Accident Insurance., • Vacation, sick days, paid caregiver leave, volunteer and bereavement paid time off., • Identity theft protection., • Annual discretionary bonus., • Generous Tuition Reimbursement Program., • Company-paid holidays and floating holidays., • Company vehicle (if applicable)., • Employee discounts; vehicles, tires, cellular plans, and more., • Networking and employee engagement events., • Personal development to grow your career with us based on your strengths and interests. Application Deadline: Recruiting timelines vary by position; however, all Tallgrass positions accept applications for at least five business days from the posting date. This position is open and still accepting applications. Compensation: Compensation ranges are provided in good faith based on what we anticipate when researching wages for this position at the state and national levels. We may ultimately pay more or less than the posted range. This salary range may also be modified in the future. Notice to External Search Firms: Tallgrass does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Tallgrass property; therefore, Tallgrass will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Approved vendors may be invited to refer talent for specific positions at Tallgrass's request only. A fully executed agreement with Tallgrass must be in place and current in these cases. EEO Statement: Tallgrass complies with all Equal Employment Opportunity (EEO) affirmative action laws and regulations. Tallgrass does not discriminate on the basis of age, race, religion, color, sex, national origin, marital status, genetic information, sexual orientation, gender Identity and expression, disability, veteran status, pregnancy status, or other status protected by law.