Trabajos electrical en Boston, MassachusettsCrear alertas

Administrative Director of Emergency Department Department: Emergency Department Status: Full-time, 40 hours per week FLSA Classification: Exempt Work Arrangement: Four Days On-Site, One Day Remote or 8A-5P Mon-Fri Reports To: SVP, Operations About the Role The Emergency Department Administrative Director is a senior clinical and operational leader responsible for overseeing the daily operations of a high-volume, 24/7 Emergency Department serving approximately 45,000 patients annually within a culturally and linguistically diverse community. This role is suited for a master’s-prepared (MBA or MHA/MNA) Emergency Medicine Nurse Leader, Nurse Practitioner, or Physician Assistant with significant clinical and administrative experience. In close partnership with the Emergency Department Medical Director and senior leadership, the Director leads clinical operations, workflow redesign, quality improvement initiatives, staffing strategy, and budget oversight. While primarily administrative, the role also includes a clinical practice component aligned with the individual’s licensure. The ideal candidate is a strategic, collaborative leader who can drive operational excellence, ensure high-quality patient care, and support multidisciplinary teams in a fast-paced emergency care environment. The Emergency Department Administrative Director oversees, with the Emergency Department Medical Director, the daily operations of a busy 24/7 emergency service. Predominantly administrative in nature, this full-time position also includes clinical practice requirements. Under the guidance of the senior clinical management team and in collaboration with the Emergency Department Medical Director, the Administrative Director will be responsible for the development, implementation, and evaluation of the department’s ongoing service delivery system and redesign efforts. The successful candidate will be able to perform the following responsibilities: • Develops and implements changes to clinical workflows and practices to support the department’s ongoing lean initiatives and practice guidelines., • Designs, implements, and oversees the department’s performance improvement efforts., • With the Medical Director and SVP of Operations, continually assesses and modifies the staffing necessary to support the delivery of high-quality, safe, and effective emergency care., • Provides guidance, support, and supervision for the care delivery team comprised of RNs. MAs and clerical staff across all three shifts., • Provides direct support, ongoing education, and leadership mentoring to the designated charge nurses responsible for the patient flow on the floor., • Represents the Emergency Department at key meetings (e.g. Clinical Administrative Directors) and committees (e.g. Infection Control, Performance Improvement, Joint Commission Subcommittee, Emergency Operations Planning Committee), • Provide direct patient care appropriate to the role of the NP/PA or RN, whichever applies, within the Emergency Department., • Collaborates with the Medical Director and Finance Team in developing the departmental annual budget and monitoring monthly expense reports., • Upholds safety policies, practices, and procedures, including safety, fire safety, electrical safety, proper body mechanics and material handling, office/ergonomic safety, and other employee safety measures. Requirements:, • Certified Nurse Practitioner or Physician Assistant, or master's prepared nurse manager, • Minimum of 5 years of progressively more responsible supervisory and management experience, ideally in an Emergency Department or in Critical Care, • Minimum of 5 years of clinical experience in Emergency Medicine or Critical Care, • Experience in applying Lean concepts to clinical workflows is a plus, • Experience serving a diverse patient population preferred, • Strong interpersonal and communication skills, with the ability to build rapport across diverse teams, • Exceptional problem-solving and conflict-resolution abilities, • Ability to handle sensitive and confidential matters with professionalism and discretion, • Proficiency in Microsoft Office Suite, • The ability to work in a fast-paced environment #AC1 #ACP

Stability Healthcare is seeking a travel nurse RN Electrophysiology Lab for a travel nursing job in Boston, Massachusetts. Job Description & Requirements • Specialty: Electrophysiology Lab, • Discipline: RN, • Start Date: 03/30/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #813572. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: EP About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Stability Healthcare is seeking a travel Electrophysiology Technician for a travel job in Boston, Massachusetts. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #821204. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Electrophysiology Tech About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Stability Healthcare is seeking a local contract nurse RN Electrophysiology Lab for a local contract nursing job in Boston, Massachusetts. Job Description & Requirements • Specialty: Electrophysiology Lab, • Discipline: RN, • Start Date: 03/30/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #L-813572. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: EP About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Stability Healthcare is seeking a local contract Electrophysiology Technician for a local contract job in Boston, Massachusetts. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #L-821204. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Electrophysiology Tech About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Interfaces with outside suppliers/customers and other engineering disciplines to drive designs to closure (Structural, Systems Engineering, Electrical, Manufacturing, Performance, Quality, Configuration Management). Bachelor’s Degree in Mechanical Engineering or other related engineering or scienc

$22.00/hourUp to $5,000 Retention BonusShift Premium may Apply Immediately hiring! We’re looking for responsible, detailed people who are ready to accelerate their automotive repair career! Whether you have worked in an auto garage or car dealership, this job is for you! Join our team of driven professionals at Avis Budget Group enterprise. What You’ll Do: As an automotive technician, you will be responsible for conducting essential repairs on a diverse range of vehicle brands and models, requiring minimal technical oversight. Your tasks will encompass various maintenance activities such as oil changes, lubrication, tire repairs, and potentially warranty repairs based on your proficiency level. In addition, you may support our skilled mechanics in handling intricate repair procedures. Perks You’ll Get: * Bi-weekly hourly wage (New York and Puerto Rico: weekly wage) * On-the-job training to expand your automotive abilities and help to obtain ASE Certificates * Paid time off * Medical, dental and other insurance * Flexible spending account opportunity to contribute up to $270 as a tax-free benefit for public transportation or parking expenses * Retirement benefits (401k) * Employee discounts, including discounted car rental and discounted prices on the purchase of Avis/Budget cars • Above perks may vary based on full-time/part-time status and location What We’re Looking For: * Valid Driver’s License and good driving record * At least 2 years of auto repair experience or coursework with automotive certifications * 1 ASE certification (ability to acquire 2 additional ASE certifications within first year) * Knowledgeable in areas covered by the ASE certification programs, including, but not limited to, Engine Repair, Drive Train/Axles, Suspension/Steering, Brakes, Electrical, Heating/Air Conditioning, Engine Performance and Light Vehicle/Diesel * Comfortable working in a mechanical shop with moderate or loud noise levels * Must have a complete set of tools required for auto repair and maintenance * Basic computer skills including typing, data entry * Must be able to lift up to 50 pounds, continuously stand, bend, reach, walk, sit and kneel frequently, enter, exit and drive vehicles * Must be 18 years of age and legally authorized to work in the United States * This position requires regular, on-site presence and cannot be performed remotely * Previous Original Equipment Manufacturer (OEM) experience preferred, providing an added advantage! Who We Are? Here at Avis Budget Group, you will be joining a team of 25,000 driven people, performing with purpose. Together, we’re moving the future of transportation forward with our innovative, customer-focused solutions. Our culture is performance driven, where we encourage and support each other to be at our best through leadership, training, tools, and rewards. We are proud to make a positive difference to the lives of our colleagues, customers, and communities where we operate. Avis Budget Group is an Equal Opportunity Employer – Qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran or any other category protected by applicable law. This advertisement does not constitute a promise or guarantee of employment. This advertisement describes the general nature and level of this position only. Essential functions and responsibilities may change as business needs require. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. This position may be with any affiliate of Avis Budget Group. East Boston Massachusetts United States of America

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: Competitive pay from $30 -$50 hourly DOE, • Sign on Bonus: Up to $3,000.00 DOE, • Maximize your earnings with aggressive shift premiums that can increase your potential earnings by up to 15%., • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and 401(K)., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectations, • Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner., • Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base., • Test malfunctioning systems and components using electrical and/or mechanical skills., • Maintain legible corporate and personal records of work history., • Provides department support by processing job tickets, and work orders to the necessary department promptly., • Provide support by picking up, delivering, and installing cases., • Perform work on minor construction and remodeling projects including startups of new installations., • Drives company vehicle in a safe manner., • Performs other related duties and projects as assigned by management. Qualifications:, • High school diploma/GED., • EPA certification., • Certification from an accredited vocational-technical or trade school is a plus!, • Minimum 5+ years of commercial refrigeration experience required., • Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus., • Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful., • Must have a good driving record and be able to work independently., • Emergency on-call availability is a basic requirement., • Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Job Description About Us Keystone Management is directed by experienced professionals. From managing the world's busiest airport and biggest airline, to managing the largest cereal manufacturing facility, our experience in specialized, technical industrial, facility, and aviation services are second to none. We provide various asset management and operations-oriented technical services such as building maintenance, preventive maintenance, project management, construction management, energy management, repairs, and troubleshooting of facility assets. JOB SUMMARY As a Journeyman Plumber at Keystone Management, LLC, you will be responsible for performing general maintenance and complex plumbing repairs at the airport hangars and terminal at Boston Logan International Airport. Your tasks will include troubleshooting, installations, preventive maintenance, and ensuring compliance with all plumbing codes. You will also maintain, and repair other building structures and shop equipment as needed. Location: Boston Logan International Airport (BOS) Boston, MA Shift: 2pm-10:30pm Tuesday - Saturday Hourly Rate: $39-$44/hour ESSENTIAL JOB DUTIES AND RESPONSIBILITIES • Troubleshoot and install plumbing systems., • Perform service work on plumbing components, ranging from minor to complex issues., • Conduct preventive maintenance on shop equipment and troubleshoot breakdowns., • Adhere to health, safety, and operational protocols., • High school diploma or equivalent required., • Journeyman Plumber License: Required., • Full-time position (40 hours per week), with occasional overtime., • Ability to stand, walk, kneel, and lift up to 75 pounds regularly., • Successfully pass a background check with Keystone Management, LLC and the Federal Aviation Administration., • Successfully pass the Boston Logan International Airport Airport SIDA badge and drivers test within two tries., • Competitive Salary, • 401(k) with company match, • Comprehensive health, dental, and vision insurance, • Paid time off, including your birthday off, • Life, short-term, and long-term disability insurance, • Professional development opportunitiesCompany DescriptionKeystone Management is directed by experienced professionals. From managing the world's busiest airport and biggest airline, to managing the largest cereal manufacturing facility, our experience in specialized, technical industrial, facility, and aviation services are second to none.Keystone Management is directed by experienced professionals. From managing the world's busiest airport and biggest airline, to managing the largest cereal manufacturing facility, our experience in specialized, technical industrial, facility, and aviation services are second to none.

Overview: WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: Competitive pay from $30 -$50 hourly DOE, • Sign on Bonus: Up to $3,000.00 DOE, • Maximize your earnings with aggressive shift premiums that can increase your potential earnings by up to 15%., • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and 401(K)., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectations, • Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner., • Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base., • Test malfunctioning systems and components using electrical and/or mechanical skills., • Maintain legible corporate and personal records of work history., • Provides department support by processing job tickets, and work orders to the necessary department promptly., • Provide support by picking up, delivering, and installing cases., • Perform work on minor construction and remodeling projects including startups of new installations., • Drives company vehicle in a safe manner., • Performs other related duties and projects as assigned by management. Qualifications:, • High school diploma/GED., • EPA certification., • Certification from an accredited vocational-technical or trade school is a plus!, • Minimum 5+ years of commercial refrigeration experience required., • Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus., • Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful., • Must have a good driving record and be able to work independently., • Emergency on-call availability is a basic requirement., • Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on ___ and ___. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

One of the largest community health centers in the country, that proudly serves the Boston MA area, is currently seeking an experienced Medical Director to help lead their dedicated team of professionals. This role comes with amazing benefits as well as a very competitive salary. Please apply for more details! Medical Director - Adult Medicine Salary: $225,000 to $300,000 + DOE Position Summary/Responsibilities: • In collaboration with Adult Medicine leadership team, the Medical Director is responsible for, • Collaborating closely with Adult Medicine leadership team and assuring timely and ongoing communication amongst leadership and departmental staff, • Administrative and clinical development of medical staff in Adult Medicine, • Overseeing and optimizing patient safety and patient experience, • Recruiting and orienting new physicians and advanced practice, • Developing departmental continuing education presentations, • Supporting, mentoring, and overseeing primary care providers in their clinical practice, • Developing and updating departmental clinical policies and procedure, • Overseeing clinical quality management of the department, • Assisting the department in annual performance improvement projects, • Collaborating with the IT department for data reporting and validating IT reports, • Working closely with coding and billing departments to assure proper coding., • Providing real-time clinical consultation for colleagues, • Providing real-time support and problem solving for acute patient situations, • Clinical Leaders meeting weekly, • CDS Workgroup monthly, • Epic Workgroup monthly, • Medical Standards Committee monthly, • Manager’s meeting monthly, • Medication Safety monthly, • Risk Management monthly, • Pharmacy and Therapeutics quarterly, • Performance Improvement monthly, • Research Advisory Board monthly, • Departmental review monthly, • Antimicrobial Stewardship Committee monthly Chair or Co-Chair:, • Team Leaders Meeting weekly, • Business Meeting monthly, • Primary Care Conferences 2-3 times a month Job Components, • Clinical: 12 scheduled clinical hours (15 payroll hours) as a primary care physician Other Duties & Responsibilities--Organizational Competencies Reads, understands and complies with all Standards of Conduct, Joint Commission policies, requirements set forth by the United States Department of Health and Human Services' Health Resources and Services Administration pursuant to Section 330 of the Public Health Service Act, applicable State regulations and guidelines, and all laws related to position responsibilities and employment. Upholds procedures and systems to safeguard the confidentiality of all patient and employee information. Upholds safety policies, practices, and procedures including safety, fire safety, electrical safety, proper body mechanics and material handling, office/ergonomic safety, and other employee safety measures. #AC1 #ACP

OPT Industries () is a venture-backed MIT spinoff company that is focused on building the next generation of additive manufacturing technology. Working at the intersection of automation engineering, computational design, and polymer science, we design and commercially manufacture highly customizable materials and products – everything from electrical components to luxury fashion. Position Summary: Own and improve the reliability of production equipment by troubleshooting and sustaining electromechanical, controls, and firmware-adjacent systems across OPT’s manufacturing floor. Key Responsibilities: • Own and develop Python-based control, test, and automation systems., • Debug and extend ATMega embedded C/C++ (incl. hardware-software interfaces, IP networks), • Build and maintain hardware-software interfaces for sensors, motors, actuators, and data acquisition systems., • Design test infrastructure, logging, and fault detection to support production uptime and repeatability., • Update equipment, documentation, training, and maintenance procedures to prevent recurrence, • Support troubleshooting and urgent production issues on aggressive timelines Qualifications: • 5+ years of relevant experience, or 3+ years plus a Master’s degree in robotics, mechatronics, EE, CS, or a related field., • Strong Python background with experience in hardware control, automation, or test systems., • Hands-on experience with electromechanical systems: motors, encoders, sensors, power electronics, and control loops., • Working knowledge of embedded C for microcontroller-based systems, • Comfortable using Bash / Linux environments for scripting, debugging, and system operations., • Experience supporting systems in a production or manufacturing environment is a strong plus. OPT Industries is an equal opportunity employer and strictly prohibits unlawful discrimination based upon an individual's race, color, religion, gender, sexual orientation, gender identity/expression, national origin/ancestry, age, mental/physical disability, medical condition, marital status, veteran status, or any other characteristic protected by law.

Our client is a leading developer and supplier in the global automation market, they are seeking a driven Account Manager to support and grow Factory and Process Automation business in the Boston region. This role offers the opportunity to manage and expand existing accounts, develop new business, and introduce cutting-edge products and custom engineering solutions across a wide range of industries. They offer a competitive salary, comprehensive benefits, a strong PTO plan, a supportive work environment, and unparalleled technical support—along with ongoing professional development to help you succeed. If you have a proven track record in industrial automation sales and are motivated to grow with a company known for innovation and expertise. Account Manager – Responsibilities The Account Manager is responsible for overall account management and revenue growth within an assigned territory. This includes developing and maintaining strong customer relationships, identifying new business opportunities, and delivering innovative automation solutions. Key responsibilities include: • Grow existing accounts while developing new accounts within the assigned territory., • Conduct sales calls and technical presentations at designated target accounts., • Present new products and solutions to existing customers and emerging markets., • Work closely with customers to define application and product requirements., • Provide ongoing customer support, including pricing, quotations, delivery coordination, and technical assistance., • Expedite orders in coordination with purchasing and manufacturing teams., • Deliver product updates and technical training to customers., • Maintain accurate records, report sales activities, and manage target accounts using the company’s CRM system and four-week planning calendar. Qualifications Required: • Bachelor’s degree in Engineering, preferably Electrical or Mechanical, or equivalent technical sales experience., • Min of 5 years experience selling complex technical solutions; industrial sales experience strongly preferred., • Proven track record of meeting or exceeding sales quotas., • Experience using CRM systems, managing sales pipelines, and territory management, • Ability to travel regionally approximately 50% of the time. Preferred: • 3–5 years of experience in industrial automation sales., • Experience selling into one or more of the following markets:, • Original Equipment Manufacturing (OEM), • Automotive Manufacturing, • Material Handling Machinery, • Autonomous Vehicle Technology, • IIoT / Industry 4.0, • Packaging Machinery, • Mobile Equipment, • Semiconductor and electronics industries

About us *Prior experience with Military or Aerospace Account Manager within the electronic component industry is required. Future Electronics is a global leader in electronics distribution and has been for over 50 years. We are recognized for providing quality service, leading global supply chain solutions, the most effective custom engineering services, and the largest available-to-sell inventory. About the Role: We are seeking a highly motivated and technically capable Electronics Component Distribution Salesperson (SAM) to expand our presence in the Military & Aerospace (Mil/Aero) market segment. This role focuses on building strategic relationships, driving design in opportunities, and developing long-term revenue within defense and aerospace OEMs, tier 1/2 suppliers, and key engineering organizations. If you thrive in a program-driven, compliance-focused environment and enjoy selling high-reliability electronic components and solutions, this is an excellent opportunity to grow your career Key Responsibilities: • Develop and execute a strategic sales plan for Mil/Aero accounts, • Identify new business opportunities across primes, subcontractors, and engineering teams, • Drive design in engagement with engineering teams and coordinate with FAEs, • Manage complex sales cycles, including quoting, negotiations, and long-term agreements (LTAs), • Support customer requirements across NPI, prototype, production, and sustainment phases, • Maintain accurate forecasting, pipeline development, and CRM updates, • Collaborate with inside sales, supply chain, quality, and franchised suppliers, • Ensure compliance with ITAR/EAR regulations, DFARS requirements, and counterfeit mitigation standards (AS5553), • Track competitive activity and provide feedback on market trends and customer programs Qualifications: • 3–7+ years of experience in electronics component distribution, manufacturers’ rep sales, or OEM/EMS environments, • Prior experience selling into military or aerospace sectors strongly preferred, • Strong working knowledge of electronic components (semiconductors, passives, interconnects, electromechanical, RF/microwave), • Proven success developing accounts in a long-cycle, program-driven environment, • Understanding of Mil/Aero quality and compliance: ITAR, EAR, DFARS, AS9100, QPL/QML, traceability, • Ability to read and interpret BOMs, AVL/AML lists, datasheets, and lifecycle/obsolescence data, • Excellent communication, negotiation, and relationship-building skills, • Self-starter with strong organizational discipline and territory management capability Collaborative team player with a customer-focused, results-driven mindset Preferred Attributes: • Existing relationships with defense primes, aerospace OEMs, or major Mil/Aero integrators, • Technical degree (Electrical Engineering or similar) beneficial but not required, • Familiarity with CRM systems (Salesforce, Dynamics, SAP, etc.), • Demonstrated ability to collaborate cross-functionally with engineering and quality teams Why Join Us: • Competitive compensation, • Strong portfolio of franchised lines and value-added solutions, • Opportunity to influence strategic accounts in a high-growth segment, • Supportive team culture with technical resources and training, • Work with cutting-edge aerospace, defense, and advanced technology programs Future Electronics is an equal opportunity employer.

Electrical Technician with experience in a metals Rolling facility needed for well established global manufacturing company This Jobot Job is hosted by: Joseph Calabrese Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $85,000 - $95,000 per year A bit about us: We are a leading top provider of metal sheet, plate, extrusions, and other innovative architectural products that support industries such as aerospace, automotive, building, and construction. We solve complex engineering challenges and transform the way we fly, drive and build. Why join us? • Competitive Compensation, Bonus and Benefits Package, • Stable Career path, • Rewarding experience to work with fortune 500 Company, • Excellent culture and peers, • 401K Match, • 3 weeks of vacation to start Job Details The Electrical Technician will provide technical & tactical support and leadership on planned and un-planned equipment breakdowns and outages on production centers; provide technical support on specialized equipment such as Direct Fire melt furnaces. Allen Bradley Programmable Controllers, RS Logics and AC/DC drives. Also provides assistance to Engineering on tune up, check out, and commissioning of new and revised equipment. Train and mentor Unit Supervisors and craftspeople, enabling continuous technical skills improvement throughout the organization. Basic Qualifications: High School diploma or GED from an accredited institution Minimum of six (6) years electrical experience in an industrial manufacturing environment. Strong verbal and written communication skills Strong ability to read electrical drawings, troubleshoot to root cause, and implement repairs to restore flow of equipment. Preferred Qualifications: Completion of a recognized electrical apprenticeship, four years on the job training or electrical degree from an accredited technical college or institution Broad electrical experience, with a preference for knowledge of non-destructive testing systems. Strong ability to read electrical drawings, troubleshoot to root cause, and implement repairs to restore flow of equipment Experience applying knowledge on servo systems, stepper drives, PLC programming and troubleshooting, ac & dc motors, and variable speed drives. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Company Name: ARS-Rescue Rooter Overview: Pay: $20.00 per hour + commission Earning potential: $22 – $30/hour on average with commission Schedule: weekdays and weekend availability Location: Rockland - Plymouth - Bridgewater Part-time and full-time opportunities available Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ professionals and over 45 years of trusted home service. What We Offer: * Weekly pay via direct deposit * Commission on top of hourly rate * Paid training — no HVAC experience required * Career path into Sales Advisor roles * Full-time employees also receive: * Insurance available after 31 days * Low-cost medical (as low as $5/week) * Dental, vision, HSA/FSA * 401(k) with company match * Paid time off + holiday pay * Company-paid life insurance Responsibilities: Work inside a national retail home improvement store engaging customers about HVAC upgrades, indoor air quality, and energy savings. You’ll promote free in-home consultations or schedule tune-ups — our expert sales advisors handle the rest. Qualifications: What You Need: * Outgoing personality and willingness to speak with shoppers * Retail, kiosk, or sales experience preferred (not required) * Ability to stand and walk during shift * Weekend and some holiday availability * Reliable transportation * Clean, professional appearance to represent the ARS brand * Must be at least 18 years old and pass a background check * Attend weekly in-office meetings Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Available in multiple locations...full list found at the bottom of this description. HYBRID A prestigious international AmLaw 50 firm is seeking a highly qualified and motivated Associate Attorney to join its nationally recognized Intellectual Property Litigation Practice Group. This position offers the opportunity to work on high-impact patent and trade secret disputes for some of the world’s most innovative companies. The team is known for its success in high-stakes litigation in federal courts across the country, before the International Trade Commission (ITC), and in inter partes review (IPR) proceedings before the Patent Trial and Appeal Board (PTAB). Candidate Profile • JD from a top-tier law school with a strong academic record, • Active Bar Admission in the relevant jurisdiction, in good standing, • 2–4 years of substantive experience in intellectual property litigation, including patent and/or trade secret disputes, • Trial experience, IPR proceedings, and ITC litigation experience are highly valued, • Bachelor’s or higher degree in Electrical Engineering, Computer Science, Physics, Chemistry, Biochemistry, Chemical Engineering, Mechanical Engineering or equivalent is preferred., • Strong research, writing, and oral advocacy skills, • Ability to manage matters independently and effectively, • Represent clients in a wide range of complex intellectual property disputes, including patent and trade secret litigation, • Develop and execute litigation strategies in federal courts, ITC, and administrative proceedings, • Draft pleadings, motions, discovery, and other substantive legal documents, • Coordinate discovery, including e-discovery processes, with clients, co-counsel, and vendors, • Conduct depositions, support trial teams, and participate in hearings and trials, • Collaborate closely with partners and senior associates to deliver exceptional client service, • Engage with clients in strategic planning and risk assessment related to IP enforcement and defense Why Join Us? This is an exciting opportunity to become part of a leading IP practice with a consistent record of success across industries. The team is known for handling some of the most challenging competitor and PAE patent litigation in the country and has appeared in more than 100 IPR proceedings before the PTAB. Associates enjoy hands-on experience, early client contact, and individualized mentorship designed to accelerate development. The firm offers extensive training programs, a supportive and collegial environment, and exposure to cutting-edge legal and technical issues at the intersection of law and innovation. This is an ideal role for candidates who are passionate about sophisticated IP litigation and looking to grow their careers within a highly collaborative, trial-focused environment. Compensation & Benefits • Competitive compensation: Expected annual salary range of $235,000-$310,000, as determined by experience and market factors, • Eligibility for discretionary performance-based bonuses Locations CA (LA, Santa Monica, Orange County, San Francisco, Silicon Valley) MA (Boston) NC (Charlotte) NY (New York) DC (Washington) FL (Miami) Our client is an Equal Opportunity Employer. #LI-DNP

Well rounded Maintenance Technician needed for manufacturing plant in Maryland! This Jobot Job is hosted by: Christine McNamara Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $37 - $42 per hour A bit about us: We are on the hunt for a highly skilled and experienced Maintenance Technician to join our dynamic plant. As a key member of our team, you will be responsible for ensuring the smooth operation and maintenance of our machinery and equipment. You will be expected to perform a wide range of tasks related to repair, machine maintenance, electrical troubleshooting, plumbing, HVAC, and more. Your technical expertise, problem-solving skills, and commitment to quality will play a vital role in our company's success. Why join us? • 100% coverage of health benefits, • Pension plan, • PTO & sick leave Job Details Responsibilities: 1. Performing routine inspections of machinery and equipment to detect and respond to problems, malfunctions, and performance issues., 2. Conducting regular maintenance tasks such as replacing parts, repairing machinery, and addressing any technical or mechanical issues., 3. Utilizing CMMS (Computerized Maintenance Management System) to track and manage maintenance tasks and inventory., 4. Carrying out electrical troubleshooting to diagnose and rectify electrical issues with machinery and equipment., 5. Handling plumbing and HVAC duties to ensure a comfortable, safe, and efficient work environment., 6. Adhering to all safety protocols and procedures to prevent accidents and injuries., 7. Collaborating with other team members and departments to optimize maintenance procedures and enhance productivity., 8. Staying updated on industry trends, advancements, and best practices related to machinery maintenance and repair., 9. Providing emergency repairs promptly and efficiently., 10. Participating in the implementation and maintenance of food manufacturing processes, ensuring adherence to industry standards and regulations. Qualifications: 1. A minimum of 2 years of experience in a similar role., 2. Proven experience in repair, machine maintenance, electrical troubleshooting, plumbing, HVAC, and the use of CMMS., 3. Extensive knowledge of machinery and equipment preferably in the food & beverage manufacturing space., 4. A strong understanding of the principles and applications of machinery in food manufacturing., 5. Exceptional problem-solving skills, with the ability to diagnose and resolve technical and mechanical issues efficiently., 6. Excellent communication and teamwork skills, with the ability to collaborate effectively with colleagues and other departments., 7. A strong commitment to safety, quality, and excellence in all aspects of the job., 8. The ability to work independently, manage multiple tasks simultaneously, and meet deadlines., 9. A valid driver's license and the ability to respond to emergency maintenance calls outside of regular working hours., 10. Professional certification in Maintenance, Electrical, or Mechanical Engineering is a plus. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Traveling Electrical Sr. Project Manager - Excellent Pay & Benefits - Full-Time/Permanent Position This Jobot Job is hosted by: Maria Ardon Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $260,000 per year A bit about us: We are a large, rapidly growing EPC company known for being an employee-centric organization. Why join us? Great Benefits and strong compensation with Permanent/Full-time employment. Job Details Job Details: Our company is seeking a highly skilled and motivated Permanent Traveling Electrical Senior Project Manager to join our dynamic team. This unique position offers the opportunity to work on diverse construction projects while traveling extensively. The ideal candidate will have a strong background in the construction industry, specifically in high voltage, commercial ground up, industrial ground up, and data center projects. This is a high-impact role that requires a combination of project management, technical expertise, and leadership skills. If you have a passion for construction, a knack for problem-solving, and a desire to explore new places, this is the perfect opportunity for you. Responsibilities: 1. Oversee all aspects of electrical projects, including design, planning, scheduling, budgeting, and execution., 2. Collaborate with clients, architects, engineers, and contractors to ensure project requirements are met and exceeded., 3. Handle high voltage electrical systems in commercial, industrial, and data center settings., 4. Manage and supervise on-site construction teams, ensuring all work is performed safely and in accordance with design specifications and quality standards., 5. Solve complex technical challenges and provide innovative solutions to meet project goals., 6. Regularly report progress to senior management, including budget, schedule, and any potential issues., 7. Ensure compliance with all relevant safety and building codes., 8. Travel extensively to various construction sites to oversee project execution and ensure quality control. Qualifications: 1. Bachelor's degree in Electrical Engineering, Construction Management, or a related field., 2. Minimum of 5 years of experience in project management within the construction industry., 3. Proven experience with high voltage, commercial ground up, industrial ground up, and data center projects., 4. Strong technical knowledge of electrical systems, building codes, and safety regulations., 5. Excellent leadership and team management skills., 6. Exceptional problem-solving abilities and attention to detail., 7. Strong communication and interpersonal skills for effective client and team interactions., 8. Willingness to travel extensively., 9. PMP certification is a plus. This position offers a unique opportunity to combine your love for travel and construction while working on exciting, high-impact projects. If you have the experience, skills, and drive to succeed in this role, we would love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Architect This Jobot Job is hosted by: Merwan Zattam Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $135,000 per year A bit about us: We exist to make better buildings faster. We are part of a larger framework - Design Manufacture Construct (DMC) - that guide building design so that construction can leverage manufacturing productivity. We’re made up of smart architects, engineers, manufacturers, programmers, and other generalists that are united by the notion that to make great things intelligently is a worthy pursuit. We are seeking a talented and energetic Architects to join our design group. Job description: As a Program Architect, you will work with project teams in a dynamic, rapid-growth work environment with bright and talented engineers, architects, designers, builders, crafters, and manufacturers to improve and deploy a prototype building program and to build an alternative to the traditional construction industry. From desk to factory floor to job sites and client meetings, you will be challenged to develop your skills in a new field, taking a critical role in project delivery via the DMC methodology Why join us? We offer the full spectrum of comprehensive benefits including: health, dental, and vision insurance. We also offer flexible spending accounts, paid time off, short term disability, long term disability, life insurance and a 401k plan. Job Details Overview: We are seeking a talented and driven Design Lead to join our team and help shape the future of modular healthcare environments. This role begins with a focus on designing healthcare components—such as medical headwalls and bathrooms—with opportunities to expand into complete patient room modules. Key Responsibilities: Lead the design of modular healthcare products, including volumetric modules and wall panel systems. Manage a team of product designers and coordinators to produce documentation for coordination and manufacturing. Collaborate with design, engineering, and fabrication teams to enhance product performance and manufacturability. Ensure modular components meet regulatory standards, system performance goals, and user experience expectations. Develop and implement tools to maintain documentation quality, including work standards, written processes, and checklists. Serve as the primary client contact for program design standards and potential design modifications. Oversee the creation of Bills of Materials (BOM) for cost estimation and material procurement. Support product development through material specification and prototype coordination. Required Qualifications: Minimum 5 years of experience with Revit (or demonstrated proficiency). Solid understanding of standard construction methods. Familiarity with Mechanical, Electrical, and Plumbing (MEP) design is preferred. Strong written and verbal communication skills. Ability to manage a dynamic workload balancing short-term manufacturing support with long-term design objectives. Proven experience as a designer or in a similar role. Comfortable working in open office, manufacturing, and construction settings. Availability for morning team meetings at 7:30 AM CST and during manufacturing hours. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Staff Electrical Engineer needed for well established global manufacturing company based in Davenport, IA This Jobot Job is hosted by: David Hyon Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $90,000 per year A bit about us: We are a leading top provider of metal sheet, plate, extrusions, and other innovative architectural products that support industries such as aerospace, automotive, building, and construction. We solve complex engineering challenges and transform the way we fly, drive and build. Why join us? • Competitive Compensation, Bonus and Benefits Package, • Stable Career path, • Rewarding experience to work with fortune 500 Company, • Excellent culture and peers, • 401K Match, • 3 weeks of vacation to start Job Details The Staff Electrical Engineer will provide electrical engineering services to the Plate Mill department to safely meet business plan by providing support to production, maintenance, and engineering. In this role, you will serve as a critical team member in the efficiency, output, and quality of our processes and will be responsible for electrical systems safely integrated with manufacturing, along with upgrades of existing equipment. Additional responsibilities of this Staff Electrical Engineer position are the following (but not limited to): Coordinate all phases of assigned area electrical engineering projects from concept, scope development, written specifications, bid solicitations, design, manufacturing, equipment commissioning, and project closure Lead and participate in problem solving efforts with multi-discipline technical staff, maintenance and production Use PI Vision and Data Link to analyze process issues and provide input to solve process problems Create and develop electrical control solutions that will support process improvements and improve equipment reliability. Assist production and maintenance with equipment and process issues PLC/HMI and controls redesign and upgrades of existing processes Install and troubleshoot camera systems on industrial equipment May mentor employees to increase their knowledge of equipment and process, when needed While this position is a primarily day-shift position, off-hours support will be required as needed. o Project management experience is a must for this role o 50/50% Project management and production maintenance support o No direct reports o Manufacturing & PLC exp. is preferred, not a must Qualifications: • Bachelor’s degree in Electrical Engineering at time of employment from an accredited institution, • Minimum 7 years experience as an electrical engineer, • Excellent written and verbal communication skills, • Work schedule/hours/travel/etc. – M-F 8am-4:30pm,Could be called for off hours remote or onsite Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Are you looking to make a meaningful impact on public health and the environment? Join the MWRA team! We deliver some of the nation's highest-quality drinking water to 3 million residents, restored Boston Harbor, and continue to invest in protecting vital public resources. Be part of a mission-driven organization where your work truly makes a difference-in a safe, inclusive, and supportive environment. Summary: Perform inspection, servicing and maintenance on structural components of vehicles and shop equipment. Posting Period: 3/5/2026 to 3/18/2026 Location: Chelsea, MA Salary: $65,815.51 - $94,546.05 Annually $1,265.68 - $1,818.19 Weekly Work Schedule: Monday - Friday 7:00am - 3:30pm Key Responsibilities • Inspect structural components of vehicles and equipment to locate trouble and determine needed repairs., • Performs welding, grinding and cutting procedures under the direction of the Unit Supervisor., • Assists on road calls and makes repairs either on the road or in the garage., • Keeps inventory of welding and cutting stock including structural steel members and recommends needed supplies., • Set-ups and operates hand, electric and air-operated tools hydraulic jacks and hoists using oxyacetylene and electric arc welding equipment for fabrication, repair or alterations to machinery., • Keeps and updates records of work performed., • Rigs equipment to be moved using cranes and hoists with lift straps and/or chains., • Evaluates equipment, reports damage and unsafe conditions and recommends maintenance program requirements., • With proper training sets up ladders, staging, rigging, and utilizes hoists, dollies, lifts etc., for proper access to job and to remove and install equipment., • Performs other related duties as required. Required Qualifications • A high school diploma or GED; and, • One (1) year certificate from college or technical school; and, • At least three (3) years experience in welding, grinding and cutting in an automotive and heavy equipment area; or, • Any equivalent combination of education and experience., • Valid Class D Motor Vehicles Operator's License., • This position has been designated as essential in instances where the MWRA Executive Director requires essential personnel to report to work such as inclement weather or other emergencies. Knowledge and Abilities • Knowledge of methods, tools, materials and practices used in repairing, rebuilding and adjusting automotive equipment. Welding, grinding and cutting are key skills required., • Skill in the use of the tools and equipment employed in repairs, rebuilding and adjustment work., • Skill in diagnosing structural problems in conjunction with Unit Supervisor., • Ability to operate any motor-driven equipment in section., • Ability to understand and follow oral and written instructions., • Excellent interpersonal, oral, and written communications skills., • Basic reading, writing, mathematical and scientific skills. Tools and Equipment Used Power, hand and welding tools, construction equipment, mobile radio, telephone, personal computers including word processing and other software, copy and fax machine. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to handle, finger, feel or operate objects, tools, or controls and reach with hands and arms. The employee frequently is required to stand and talk or hear. The employee is occasionally required to walk; sit; climb or balance; stop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance and peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee occasionally works in outside weather conditions. The employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals and risk of electrical shock. The employee occasionally works in extreme bright light or extreme inadequate light conditions, cramped work space that requires getting into awkward positions. The noise level in the work environment is usually loud in field settings, and moderately quiet in an office setting. Supervision Received and Exercised Unit Supervisor. Other Position Information PCR: 5470020 Division: Operations Department: EQ - General Union/Grade: AFSCME (Unit 2)/Grade 16 Massachusetts Water Resources Authority (MWRA) is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, national or ethnic origin, age, religion, disability, sex or gender, sexual orientation, gender identity or expression, or veteran status. Job Posted by ApplicantPro

Job Description Are you looking to make a meaningful impact on public health and the environment? Join the MWRA team! We deliver some of the nation's highest-quality drinking water to 3 million residents, restored Boston Harbor, and continue to invest in protecting vital public resources. Be part of a mission-driven organization where your work truly makes a difference in a safe, inclusive, and supportive environment. Summary: Fabricates and repairs metal parts; welds, cuts and installs metal parts of equipment; lays out sketches and reads blueprints; rigs equipment and performs preventive maintenance on plant equipment. Posting Period: 3/11/2026 to 3/24/2026 Location: Chelsea, MA Salary: $65,815.51 - $94,222.99 Annually $1,265.68 - $1,811.98 Weekly Work Schedule: Monday - Friday 7:00am - 3:30pm Key Responsibilities • Fabricates, cuts, forms, welds, assembles and installs metal parts of equipment in conformance with drawings, plans or instructions through the use of machine, tool, bench or hand work as required., • Assembles and disassembles scaffolding, staging, flooring and grating., • Sets-up and operates hand, electric and air-operated tools, hydraulic jacks and hoists using oxyacetylene and electric arc welding equipment for fabrication, repair or alteration to machinery., • Sketches work to be completed and interprets existing blueprints to estimate size of parts needed., • Performs preventive maintenance on pumps, generators, valves, turbines, gates and gate assemblies and related equipment., • Rigs equipment to be moved using cranes and hoists with lift straps and/or chains., • Evaluates equipment, reports damage and unsafe conditions and recommends maintenance program requirements., • Performs light maintenance independently or as part of a team. Light maintenance shall include but not limited to:, • Inspects and troubleshoots various systems and equipment, • Installs and retrofits/new equipment related to plant systems., • Modifies and/or aligns existing equipment to specifications., • With proper training sets up ladders, staging and rigging and utilizes hoists, jacks, dollies, lifts, etc. for proper access to job and to remove and install equipment., • Operates portable pumping and/or ventilation equipment to prepare a work area for access., • Opens hatches., • Installs safety rails., • Routine testing, lockout/tagout, operation (startup/shutdown) and adjustment of process equipment., • Removes snow from immediate work area., • Promotes and participates in the cross-functional work practices., • Trains peers and subordinates as requested., • Performs related duties as required. Required Qualifications • A high school education or the equivalent; and, • One (1) year certificate from college or technical school; and, • At least three (3) years metal trades apprenticeship or related experience; or, • An equivalent combination of education or experience., • A valid Class D Motor Vehicle Operators license., • Complete productivity improvement competency-based training program related to ESSENTIAL DUTIES AND RESPONSIBILITIES as outlined above and successfully demonstrates required competencies., • This position has been designated as essential in instances where the MWRA Executive Director requires essential personnel to report to work such as inclement weather or other emergencies. Knowledge and Abilities • Knowledge of the standard practices, materials, tools, occupational hazards and safety practices common to the trade, including safe techniques for assembling and welding staging, rigging and material handling equipment., • Ability to work from manufacturer's manuals and specifications, blueprints, schematics and verbal instructions to weld and fabricate all kinds of metals., • Ability to maintain and repair mechanical, electro-mechanical, pneumatic and hydraulic equipment., • Skill in the operation of welding tools and equipment., • Ability to apply concepts of basic algebra and geometry., • Excellent interpersonal, oral and written communication skills., • Basic reading, writing, mathematical, scientific and oral communication skills. Tools and Equipment Used Power, hand and welding tools, construction equipment, mobile radio, telephone, personal computers including word processing and other software, copy and fax machine. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly required to use hands to finger, handle, feel or operate objects, tools, or controls and reach with hands and arms. The employee frequently is required to stoop, kneel, crouch or crawl. The employee occasionally is required to stand, walk, talk or hear, sit, climb, or balance. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds. Specific vision abilities required by this job include close vision, distance and peripheral vision, depth perception, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee occasionally works in outside weather conditions. The employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals and risk of electrical shock. The employee occasionally works in extreme bright light or extreme inadequate light conditions, cramped work space that requires getting into awkward positions. The noise level in the work environment is usually loud in field settings, and moderately quiet in an office setting. Supervision Received and Exercised Works under the direct supervision of the Unit Supervisor. Exercises close supervision of one (1) skilled laborer in the absence of the Unit Supervisor. Other Position Information PCR: 5470016 Division: Operations Department: EQ - General Union/Grade: NAGE (Unit 3)/Grade 16 Massachusetts Water Resources Authority (MWRA) is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, national or ethnic origin, age, religion, disability, sex or gender, sexual orientation, gender identity or expression, or veteran status. Job Posted by ApplicantPro

Salary Range: 72-114k Vaxess is developing a pipeline of next-generation therapeutics on our novel micro-array patch platform. With only five minutes of wear-time on the skin, the Vaxess’ patch combines room temperature stability with simplified application to dramatically alter the way that drugs are delivered. Vaxess is committed to enabling products that are not only more effective, but also more accessible to patients around the world. The Electrical Control Engineer designs, develops, programs, and maintains automated control systems used in industrial, manufacturing, or infrastructure environments. The role focuses on improving system efficiency, reliability, and safety through PLCs, machine vision, HMIs, robotics, and industrial networks. Responsibilities: • This is a hands-on position involving designing, building, and troubleshooting automated equipment., • Design and maintain novel automated systems and solutions that contribute to current manufacturing and scale up of manufacturing operations to eventual commercialization., • Project management of electrical and controls projects., • Design control schemes, circuits, power distribution, high/low voltage, electrical panels, and layouts., • Document electrical schematics and BOMs and contribute to assembly and installation of systems., • Develop and optimize machine vision inspection equipment, lighting, optics, and code., • Troubleshoot electrical and control issues to contribute to root cause analysis and develop timely solutions for production problems that might arise., • Contribute to continuous improvement to increase safety, quality, and efficiency of manufacturing., • Draft maintenance SOPs and contribute to implementation and maintenance of the Quality System., • Draft equipment requirements and work closely with external vendors to develop plans and evaluate proposals, and manage external projects., • Collaborate closely with cross-functional teams to support product development and manufacturing activities. Qualifications: • BS or MS in Electrical Engineering or a related discipline., • 3-5 years of high volume medical device or pharmaceuticals manufacturing or related experience., • CAD (SolidWorks or similar) for electrical schematics and drawings, • Familiarity or experience working with machine vision (OpenCV, Cognex Pro, or similar), motion control and PLC & HMI platforms (Rockwell/Allen-Bradley or similar), general programming (Studio 5000, Python, C++, or similar), • Excellent time and project management skills and proven ability to meet goals and deadlines., • Demonstrated abilities to learn new skills and fields, creatively solve challenging technical problems, think independently, and work collaboratively in diverse multidisciplinary teams., • Entrepreneurial spirit and drive to positively impact global human health. At Vaxess, we’re bringing together exceptional talent to drive our product development forward. We value collaboration, curiosity, and a dynamic work environment. To apply, please submit your CV/resume to .

Job Description Charlesgate Property Management is seeking a smart, organized, and proactive Resident Services Manager to join our growing team. This person is the primary contact for residents and the owner of all things related to resident experience. They also contribute to the overall performance of the portfolio which includes financial performance, physical building maintenance, and risk management. You will work with staff maintenance technicians, outside vendors, and our project management team as needed for maintenance, repairs, and capital projects. Management services are to be performed in a high-quality manner with a sense of urgency. Clients and property must be treated with the utmost respect and hospitality. You must be the type of person who… • is vigilantly organized and process driven, • is proactive and knows how to be creative to find solutions to problems, • can handle all types of personalities and does not rattle easily if a situation becomes stressful, • can easily work on multiple projects and deadlines simultaneously but can focus on the task at hand without being distracted, • is comfortable doing any task, big or small, to get the job done and help grow the business, • is an excellent communicator and is comfortable speaking with and writing to tenants and owners on a regular basis, • has a strong understanding of real estate financial reporting and budgeting, • has a strong understanding of multifamily residential physical property systems and equipment including plumbing, heating/cooling, electrical, and water/sewer, • B.A. or other university degree, • Managing maintenance requests, proactively supervising maintenance technicians to ensure work order and project completion on time and on budget, • Proactively communicating with residents to provide ongoing updates and recommendations to prevent problems as part of excellent service protocol, • Scheduling and negotiating with vendors to provide proposals for repairs and improvements, • Scheduling and supervising preventative maintenance items for portfolio, • Conduct building walk-throughs, ensuring buildings look their best and communicating with owners on issues/ideas for improvements, • Troubleshoot building issues and manage appropriate vendors or staff to resolve issues, • Proactively follow up on delinquencies, ensuring timely rent collection, • Ensure all lease paperwork, charges, pass-through fees are properly documented, • Oversee the move-in/move-out process, • Coordinate with the leasing team to ensure all units are properly listed and marketed, • Oversee the renewal process, • Supervise vendors and staff on site where necessary. CHARLESGATE is an integrated real estate firm that empowers thousands of clients throughout New England, metro New York City, and Denver, with a comprehensive array of services across residential and multifamily commercial real estate—including property management & leasing, sales brokerage, investment sales, construction, and new development. Founded in Boston, MA, in 2003 and headquartered in Back Bay, CHARLESGATE has the distinct honor of being one of only 4% of companies that've been on the Inc. 5000 list of fastest-growing private companies in America five times. Our Vision: To inspire and empower our clients, our team, and our communities through comprehensive real estate solutions. Our Core Principles: MOVE MARKETS & WIN TOGETHER | We're not order takers. We're partners who drive transformative wins through critical thinking and aligned action. SPEAK HARD TRUTHS | Seek first to understand the perspectives of others. CHALLENGE CONVENTIONS | Status quo is the enemy of value. We mine the gap between what is and what could be to unlock more value. OWN IT | Results matter more than effort. Accountability means rising above your circumstances. We commit fully to getting it done right. PEOPLE > EVERYTHING | Creating better outcomes for the people we serve is our highest calling. Everything we do is delivered with genuine hospitality. Equal Opportunity Statement CHARLESGATE Property Management is committed to providing equal employment opportunities and complying with all applicable federal, state, and local laws. We strive to maintain a work environment free from harassment, discrimination, or retaliation based on age, race, color, national origin, ancestry, religion, sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), physical or mental disability, genetic information, veteran status, uniformed service member status, or any other protected status. Powered by JazzHR PyZ3NSRe2e

Job Description We are looking for a Property Administrator to assist in directing and coordinating activities of on-site management. This person will assist in effectively implementing procedures, cost controls and policies, maintaining good tenant and client/owner relations, as well as assisting the Property Management team in maintaining invoice records and contacting vendors/setting up accounts. Responsibilities: • Answer management phones and assist with Tenant needs, • Respond to inquiries by providing routine information and or taking and delivering messages., • Receive and distribute and review all purchase orders, track purchase orders in Workspace, alert personnel of any problems or unresolved purchase orders, run monthly reports., • Coordinate special events such as holiday events/parties, welcome lunches, book fairs, blood drives, food drives etc., • Maintain inventory of office supplies and property staff directory., • Monitor outside vendors for compliance of contracts and certificate of insurance, • Assist with preparing and administering service agreements, • Establish and maintain record keeping and filing systems; classifies, sorts and files correspondence for tenant files and other documents, • Responsible for accounts payable, accounts receivable and reporting., • Organize and code invoices in Workspace, • Assist Chief Engineer with update of electrical analysis worksheet as utility invoices come in, • Responsible for issuing Purchase Orders, tracking, and assigning the purchase orders to invoices as they are processed for payment, • Applying tenant rents and open credits, • Compiling and reviewing Tenant Billings and other misc. charges, • Provide management team with aged delinquency reports and send late letters Desired Competency, Experience and Skills: • Must have a minimum high school education. Associates, B.A. or B.S. college degree preferred, • Minimum of 2 years previous commercial property management experience, • Experience with MRI, Workspace and Yardi software, • Previous experience in real estate accounting and familiarity with monthly accounting cycle, including an understanding of A/P, A/R, commercial leases., • Possess professional demeanor and excellent interpersonal skills., • Have access to reliable transportation and maintain a valid driver's license., • Computer literate and proficient on MS Word, Excel, PowerPoint,, • Excellent communication skills, both verbal and written, • Ability to work independently This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. Pay Range$30—$35 USD About Lincoln Property Company Lincoln Property Company ("Lincoln") is one of the largest private real estate firms in the United States. Offering a fully integrated platform of real estate services and innovative solutions to owners, investors, lenders and occupiers, Lincoln supports the entire real estate lifecycle across asset types, including office, multifamily, life science, retail, industrial, data center, production studio, healthcare, government, universities, and mixed-use properties, throughout the United States, United Kingdom, and Europe. Lincoln's combined management and leasing portfolio on behalf of institutional clients includes more than 680 million square feet of commercial space. For more information, visit: . All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. By submitting your information or resume in response to this opportunity, you acknowledge that your personal information will be handled in accordance with Lincoln Property Company's privacy policy. Lincoln Property Company does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Lincoln Property Company to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Lincoln Property Company will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

Job DescriptionDescription: Who We Are: Are you ready to work at a dynamic institution that believes in higher education with lower obstacles? Benjamin Franklin Cummings Institute of Technology (now known as Franklin Cummings Tech) is a nationally accredited non-profit, technical college serving Eastern Massachusetts and beyond. The college was seeded in 1791 with funds from the estate of Benjamin Franklin given to the City of Boston to proliferate access to education and level the playing field for aspiring talent with meager financial means. Today, Franklin Cummings Tech continues to build on that legacy by offering post-secondary education in high-demand technical and skilled trade fields that lead to excellent careers. Our majors intentionally focus on select industries connected to sustainability and the clean energy transition including electric vehicle technology, smart manufacturing, practical electricity, power engineering, heat pumps/HVAC, biotechnology, automation, construction management, and more. With a mission to deliver transformative technical and trade education that leads to economic advancement, we offer a unique mix of certificate and degree-granting programs that appeal to enterprising students and respond to employer’s demand for a well-prepared workforce. Intentional partnerships with the industries we serve coupled with high graduation and job placement rates, recently attracted the largest philanthropic gift in the history of the college from the Cummings Foundation. Last year, Franklin Cummings Tech educated more than 1,000 learners across three student types: 1) certificate and degree seekers, 2) continuing education clients, and 3) high schoolers pursuing early college. As further evidence that our mission holds resonance, this year the college tracked a 25% year-over-year jump in fall new student enrollment and applications soared. We seek team members who are optimistic, entrepreneurial, data-informed, and excited about the prospect of continuing to strategically increase student success outcomes and total enrollment from 1,000 learners today to at least 1,500 learners by 2030. Join us in this mission-driven work! Our campus is moving from the South End to Roxbury in early 2026! This new custom-built space is designed to LEED GOLD standards and will offer enhanced accessibility to mass transit routes as well as the benefits of a modern, impressive footprint in one of Boston's most vibrant cultural and educational corridors. Position Summary: The Department of Engineering Technology is seeking applications for a part-time adjunct instructor position in Engineering Technology. The candidate will be responsible for teaching courses in the area of building energy management and automated building control systems. Candidates with teaching or industry qualifications in the operations and maintenance of building automation systems, heating, ventilation, and air conditioning systems are encouraged to apply for the position. The position requires on-site and hybrid modes of delivery of coursework. Key Responsibilities: Teach various heating, ventilation, air conditioning, and refrigeration (HVAC/R), building energy management, and building automation technology-focused courses. credit hours per semester as noted on the faculty employment agreement. Courses, as listed in the College catalog, may include introductory-level courses in basic electronics. Take ownership of course development and lab/classroom instruction in the Building Energy Management (BEM) program. Example course topics include BE202: Building Automation Systems and Controls, BE210: HVAC-R BAS Lab, and BE212: HVAC-R installation and maintenance. Preferred: Ability to teach additional courses in the Engineering Technology program such as Electronics and Digital Principles. Equal Opportunity Employer: Franklin Cummings Tech is an Equal Employment Opportunity employer and does not discriminate against any applicant or employee on any grounds protected under federal, state, or local law, including race, color, religion, creed, age, sex, national origin, ancestry, marital status, pregnancy, disability (including those related to pregnancy or childbirth), sexual orientation, genetic information, gender identity or expression, veteran status or any other characteristic or activity protected under federal, state or local law. Requirements: Qualifications: Education: Bachelor's or master's degree from a recognized college or university with a major study in the field (HVAC-R engineering, energy management, or electrical engineering) that the person will be teaching. Additional training might be required based on academic background and industrial experience. Experience: Two (2) years of teaching experience, preferably at the college level. Three (3) years of industry experience may be substituted for teaching experience at the discretion of the Academic Dean and the hiring Program Chair. Experience level may be waived at the discretion of the Academic Dean and hiring Program Chair.

Job DescriptionDescription: As an Electrical Design Engineer, you will play a critical role in guiding the planning, coordination, and execution of advanced electrical systems on large-scale infrastructure projects. You will work cross-functionally with internal teams and external partners to ensure that all designs are technically robust, code-compliant, and aligned with project objectives. Your focus will be on delivering reliable, efficient, and scalable electrical solutions while upholding safety, quality, cost, and schedule commitments. Requirements: · Bachelor’s degree in Electrical Engineering or Power Engineering with electrical building systems emphasis. · Revit BIM design experience required. · Proficiency in power distribution and lighting design, including controls implementation. · Experience with short circuit analysis and utilization of analytical modeling software such as SKM or similar tools. · Strong background in the design, construction, and commissioning of medium and low voltage electrical distribution systems, and power management or SCADA tools. · Preferred qualifications include a Professional Engineering (PE) license. · Experience in mission-critical facilities and their electrical/mechanical infrastructure. · Knowledge and experience in estimating, electrical design, operation, and commissioning of substations, switchgear, and power monitoring. · Minimum 5 years' experience in A/E industry preferred. · Comprehensive understanding of professional services from conceptual design through project close-out. · Strong written and verbal communication skills, organizational skills, and ability to motivate and mentor staff. · Familiarity with sustainable design approaches and related project impacts. · Passion for improving workflows and mentoring team members. · Proficient with Microsoft Productivity Suite products. Job Responsibilities · You will serve as a key liaison between internal departments, external consultants, contractors, and the Engineer of Record (EoR) to troubleshoot and resolve electrical design challenges. · You will lead the development and review of electrical documents, including one-line diagrams, load calculations, panel schedules, submittals, technical studies, and RFIs. · You will research and develop emerging trends and new technologies to optimize electrical systems and infrastructure in data centers, enhancing efficiency, reliability, and scalability. · You will be responsible for ensuring the timely delivery of design packages by identifying bottlenecks, introducing efficiencies, and proactively managing evolving project requirements. · You will ensure electrical systems meet all applicable codes and standards (NEC, IEEE, IEC) while maintaining design quality and mitigating technical risk. · You will contribute to budget management by evaluating the cost impact of design changes, tracking electrical expenditures, and analyzing contractual obligations tied to the EoR. · You will participate in risk assessment and commissioning efforts, including factory and site acceptance testing, milestone inspections, and integration verification. · You will coordinate closely with mechanical, controls, and architectural teams to ensure the electrical systems are fully integrated into the broader design framework. · You will mentor and support junior engineers, reinforcing consistent design practices and ensuring knowledge continuity across the team. · You will help capture lessons learned and apply them to improve future design processes, standards, and project outcomes. · You will support construction activities in the field, resolving installation issues, conducting walkthroughs, and ensuring a successful handoff to operations.

Job DescriptionAbout Merlin: Merlin is a venture backed aerospace startup building a non-human pilot to enable both reduced crew and uncrewed flight. Backed by some of the world’s leading investors, Merlin is scaling alongside our customers to begin leveraging autonomy today to solve some of aviation’s biggest challenges. About You: You’re a computer vision specialist who loves turning raw sensor data into actionable insights. You thrive at the intersection of algorithms, hardware, and real-world deployment—designing systems that can see, understand, and interact with the physical world. You’re comfortable moving between high-level model development and low-level camera calibration, and you take pride in building robust solutions that work reliably outside the lab. Responsibilities: • Develop and implement object detection and identification algorithms for real-time applications., • Design and optimize depth sensing and 3D mapping pipelines, integrating data from cameras and other sensors., • Specify, configure, and calibrate camera systems, including selection of optics, sensors, and hardware., • Develop tools and processes for camera calibration, synchronization, and data acquisition., • Fuse data from multiple cameras/sensors to improve accuracy and robustness in perception systems., • Collaborate with robotics, controls, and systems engineers to integrate computer vision into robotic platforms., • Conduct experiments, evaluate performance, and refine algorithms for accuracy, efficiency, and scalability.Qualifications:, • Bachelor’s or Master’s degree in Computer Science, Electrical Engineering, Robotics, or related field., • Strong experience with computer vision algorithms (object detection, tracking, identification, SLAM)., • Proficiency in depth sensing and 3D reconstruction techniques (stereo vision, structured light, ToF, LiDAR integration)., • Hands-on experience with camera setup, specification, and calibration (intrinsic/extrinsic, distortion models, multi-camera rigs)., • Proficiency with computer vision libraries and frameworks (OpenCV, PyTorch/TensorFlow, CUDA)., • Experience developing in C++ and/or Python for high-performance vision applications., • Strong understanding of camera hardware and imaging pipelines., • Ability to design experiments, analyze results, and iterate quickly in a collaborative engineering environment.Nice to Haves:, • Experience with ROS/ROS2 integration for robotic vision., • Familiarity with real-time embedded systems or GPU optimization., • Knowledge of multi-sensor fusion (IMU, LiDAR, radar) for perception.

Job Description MERL is seeking a motivated and qualified intern to conduct research on condition monitoring and fault diagnosis. The intern will contribute to the development of advanced monitoring and diagnostic technologies, with applications that may include electric motors and motor-driven systems. Ideal candidates should be Ph.D. students with a solid background and publication record in one or more of the following research areas: fault diagnosis, prognosis, and health management; electric machine modeling and data analysis; machine learning techniques including transfer learning and domain adaptation for fault diagnosis. Strong programming skills in Python and familiarity with frameworks such as PyTorch are required. Experience with modeling and analysis of electric machines is highly desirable. Senior Ph.D. students in related fields (e.g., Electrical Engineering, Mechanical Engineering, Applied Physics) are encouraged to apply. Start date for this internship is flexible and the duration is 3 months. The pay range for this internship position will be 6-8K per month. Mitsubishi Electric Research Labs, Inc. "MERL" provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, MERL complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. MERL expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of MERL’s employees to perform their job duties may result in discipline up to and including discharge. Working at MERL requires full authorization to work in the U.S and access to technology, software and other information that is subject to governmental access control restrictions, due to export controls. Employment is conditioned on continued full authorization to work in the U.S and the availability of government authorization for the release of these items, which might include without limitation, obtaining an export license or other documentation. MERL may delay commencement of employment, rescind an offer of employment, terminate employment, and/or modify job responsibilities, compensation, benefits, and/or access to MERL facilities and information systems, as MERL deems appropriate, to ensure practical compliance with applicable employment law and government access control restrictions. In addition to base pay, interns receive a relocation stipend, covered travel to and from MERL, and a monthly Charlie Card for local commuting. Interns are invited to participate in weekly social gatherings and professional development opportunities, including research talks by both internal and external speakers. Interns who meet the 90-day waiting period are also eligible for health insurance coverage. MERL provides immigration support for qualified candidates as needed. Employment is considered “at-will,” and the Company reserves the right to modify base salary or any other compensation program at any time, including for reasons related to individual performance, departmental or Company performance, and market conditions.

Job DescriptionAt Laminar (formerly H2Ok Innovations), we're leading the charge in cleantech innovation, reshaping process industrials and manufacturing to drive operational efficiency and sustainability for our world’s most foundational industries. Powered by our Laminar AI Co-pilot models and state-of-the-art sensors, our solutions optimize facility performance across various processes, including process manufacturing, production, water management, energy reduction, and waste minimization. Based at Greentown Labs, North America's premier cleantech innovation community, we're a woman-founded startup backed by renowned investors like Greycroft, Construct Capital, 2048 Ventures, and Flybridge Capital. Our groundbreaking technologies have earned accolades and adoption from industry giants like Unilever, The Coca-Cola Company, ABinBev, and Mitsubishi Electric. We're committed to unlocking untapped data for our customers, empowering them to gain a competitive edge and create Industry 4.0. Transforming our most foundational sectors of society is hard. Very hard. But we’re building an empire. And empire building is not easy. It’s deeply fulfilling, and you will learn and grow tremendously while driving sustainable impact globally with some of the largest players that make everything we eat, use, and wear. Our culture is to foster extraordinary growth within our teammates. We believe in autonomy, ownership, empowerment, demanding excellence, being mission-driven. We believe in creativity, authenticity, and extraordinary growth. We’re looking for relentless, ambitious, creative, and exceptional people to join our team and build the factory of the future. We’re seeking an entry level Hardware Engineer whose work will focus on new system Research and Development. You will work closely with Senior Engineers across both the Hardware and Embedded Systems teams to rapidly evaluate new technologies, test performance of sensing systems, and integrate them into field prototypes. This role will perform PCB design, assembly and testing along with basic firmware development. We value a self-sufficient, hands-on engineer who isn’t afraid to ask questions and learns new skills quickly. Your work will directly impact our hardware product design, improve prototype iteration speed, and help Laminar to save more resources every day. What You Will Do • Design protype PCBs from commercially available and custom sensors using KiCAD, Solidworks, and simulation softwares such as PSPICE, • Develop and implement test strategies alongside the Laminar Data Analysis team. Collect and present this data in informal and formal reviews to allow for rapid analysis and sensor comparisons., • Assemble complex PCBAs using reflow soldering techniques. Rework non-functional units and perform modifications as needed during board bringup., • Work closely with Hardware and Operations teams to improve component accounting and tracking, • Integrate sensors to established testing platform using Zephyr RTOS, • Bring new ideas and creatively pursue new approaches to product sensing to solve critical problems for our clients., • Contribute to the overall hardware team by providing design, assembly, and debug assistance on multiple projects, • Travel Requirement: Travel to customer sites to get hands on experience (10%)About You, • 1-5 years (entry level) experience in electronics design, mechanical design, and data analysis, • Electronics experience: PCB SMD and THT soldering, rework, troubleshooting, oscilloscope use, digital signal analysis, • Ability to read and debug electrical schematics, • Basic coding experience: Python, C, C++, • Generalist mindset: comfortable working with all parts of electromechanical assemblies, data logging, as well as system-level topics, • Ability to lift up to 50 pounds, • Clear, efficient, and respectful communicator, good at balancing multiple projects and shifting prioritiesPreferred, • Extensive project or work experience in electronics design, chemical process engineering or, • Experience working with PCB contract manufacturers, machine shops both domestic and international, • PCB design experience with microcontrollers, industrial communications protocols and analog electronics combined, • Significant prior experience navigating the balance between “move fast and break things, but not the important things”, • Experience with Zephyr RTOSBenefits, • Direct impact on product and culture., • Comprehensive benefits package including Medical, Dental, Vision, Life Insurance, Disability, Transportation benefit, Health and Wellness benefit, and more., • 401k plan with employer matching, • Equity, • Competitive salary and bonus opportunities., • Dynamic and inclusive work environment., • Opportunities for growth and professional development., • Access to Greentown Labs' extensive network of cleantech startups.Learn How We Think, • Learn about our startup journey: Our Journey

Job Description SUMMARY: The sound technician is responsible for the set up, operation, and repair of all audio, video, network and satellite systems, and electrical equipment required to support live events and exhibitions at MCCA’s convention center facilities. This role ensures clients’ technical and communication requirements are met through expert cable management, A/V production support, and coordination with internal departments. ESSENTIAL DUTIES & RESPONSIBILITIES: The Authority’s Manager of Sound and AV may designate various other activities. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time for any reason. • Repair, install and operate all types of electronic equipment in accordance with the requirements of clients, • Set up, route, and manage cabling including audio, video, network, satellite, microwave, internet, telephone, and fiber wiring throughout convention center facilities, • Maintain satellites and set-up related communication links as requested, • Set-up monitor and maintain computer networks, • Set up and place microphones and monitor sounds to ensure optimal quality of sound reproduction, • Communicate with clients and internal departments regarding technical services and resolve issues, • Remove temporary wiring in exhibit halls and corridors when necessary, • Assist members of physical plant as needed in completion of their required duties MINIMUM ENTRANCE REQUIREMENTS: • High school diploma or equivalent, • Minimum 5 years of related experience in a hotel/convention center setting, • Experience with IP audio systems, • Proficient in the set-up and successful operation of audio, video and satellite equipment, • Working knowledge of computer systems and network connectivity, • Knowledge of rigging operations is desirable, • This position follows a Tuesday through Saturday 10 a.m.–6 p.m. schedule after training, however, the hours and days may fluctuate based upon the needs of a particular event or project, which would require the ability to work a flexible schedule including late nights, early mornings, long days, weekends and holidays at the BCEC or Hynes facilities (subject to any collective bargaining restrictions). PHYSICAL REQUIREMENTS: This position requires the ability to stand, walk, bend, kneel, and crouch for extended periods while setting up and operating equipment throughout convention center facilities. Employees must be able to lift, carry, and move equipment and cabling, and may occasionally be required to work at heights or in confined spaces during installation. The role involves frequent use of hands for handling tools, cables, and technical equipment, as well as the ability to distinguish audio and visual signals. Work may take place in varying environmental conditions including loud noise levels, low lighting, and both indoor and outdoor settings depending on event requirements. Reasonable accommodations for qualified individuals with disabilities will be provided in accordance with MCCA's accommodation policy and applicable laws. EQUAL EMPLOYMENT OPPORTUNITY STATEMENT: The Massachusetts Convention Center Authority (MCCA) is proud to be an equal opportunity employer. We welcome qualified applicants of all backgrounds and do not discriminate based on race, color, religion, sex, national origin, ancestry, age, disability, sexual orientation, gender identity or expression, military or veteran status, genetic information, or any other legally protected category. If you require a reasonable accommodation during the application or interview process, or to perform essential job functions, please contact our Human Resources team. This position follows a Tuesday through Saturday 10 a.m.–6 p.m. schedule after training, however, the hours and days may fluctuate based upon the needs of a particular event or project, which would require the ability to work a flexible schedule including late nights, early mornings, long days, weekends and holidays at the BCEC or Hynes facilities (subject to any collective bargaining restrictions).

Job Description Industrial Maintenance Electrician - 1st Shift Greenkiss Staffing Solutions is seeking a skilled and experienced Electrician to join our client’s team on the 1st shift. This is an excellent opportunity to work in a dynamic food production environment with competitive pay and excellent benefits. Electrician Salary: $51.35 /Hr. Location: Somerville, MA Shift: 1st Position Summary: The Electrician will maintain and operate the electrical distribution system while providing support for electrical and electronic systems in processing and packaging operations. Key Responsibilities: • Diagnose and repair issues within the electrical distribution system., • Troubleshoot and repair electrical and electronic components on processing and packaging equipment., • Ensure plant compliance with electrical codes including NEC, NFPA 70E, and OSHA regulations., • Perform power and control wiring for various projects., • Conduct preventative maintenance on electrical and electronic equipment to ensure safe and efficient operations., • Act as an expert resource for management on code compliance., • Research and recommend spare parts for inventory and projects., • Assist the Quality Assurance department with calibration of key equipment on processing and packaging lines., • Follow all safety and quality protocols strictly. Qualifications: • Current Electrician’s license required., • Minimum 5 years’ experience preferred, especially in a food production environment., • Basic knowledge of electronic control systems including PLCs., • Proficient in basic computer skills (MS Word, Outlook)., • Ability to communicate clearly and effectively., • Ability to lift up to 35 lbs as needed. Benefits • 401(k), • Health insurance, • 401(k) matching, • Paid time off, • Vision insurance, • Dental insurance, • Free parkingCompany DescriptionGreenKiss Staffing Solutions, Inc. brings over 30 years of industry expertise to the forefront of nationwide recruiting. Our team of dedicated talent acquisition specialists delivers customized staffing solutions, including contract, contract-to-hire, on-site managed services, and direct professional placements. We specialize in sourcing top-tier talent for manufacturing and regulatory environments, ensuring each candidate aligns seamlessly with your organizational needs. At GreenKiss, we don’t just fill roles — we build strong, lasting partnerships by delivering the right people at the right timeGreenKiss Staffing Solutions, Inc. brings over 30 years of industry expertise to the forefront of nationwide recruiting. Our team of dedicated talent acquisition specialists delivers customized staffing solutions, including contract, contract-to-hire, on-site managed services, and direct professional placements. We specialize in sourcing top-tier talent for manufacturing and regulatory environments, ensuring each candidate aligns seamlessly with your organizational needs. At GreenKiss, we don’t just fill roles — we build strong, lasting partnerships by delivering the right people at the right time

Job Description KES has been family owned for 30+ years and it is growing at a very fast rate. We are looking for an apprentice electrician with residential experience in their 2nd to 4th Year. Our team at KES is looking for new members to join the family and to contribute to the growth of our company. Opportunities are endless here with hard work and dedication, join a growing company that wants their employees to grow with them! Job Duties: • Works with licensed electrician to perform repairs and replacement of all residential electrical installations, • Perform all work consistent with current national, state and electrical codes as applicable, • Perform all work in a quality and timely fashion under the direct guidance of a licensed electrician, • Assist the electrician while learning the correct installation and troubleshooting, • Maintain perpetual inventory of electrical supplies and tools in company vehicle, • Foster and maintain professional relationships with business clients and fellow workers to meet or exceed our expected customer service commitment, • Instruct, train and direct less experienced employees such as newer apprentices. If you are unsure, direct questions to licensed electrician, • Accept and request increasing levels of responsibility, • Other duties may be assigned, • Maintaining cleanliness of job-site, • Completion of 75 or more hours of accredited school program required, • 6 months or more of residential electrical work experience required, • Good understanding of NEC code, • Drive to grow within the company, • Willingness to learn and improve, • Team player, • Motivational attitude, • Health Insurance, • Dental Insurance, • Vision Insurance, • Supplemental Insurance, • Cell Phone Reimbursement, • Paid Time Off, • Paid Holidays, • 2 weeks paid Paternity/Maternity Leave, • Advancement Opportunities, • Educational Reimbursement opportunities, • Compensation is competitive; compensation is based on experience, • Over-Time Pay (time and a half pay), • Bonus Opportunities, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Retirement plan, • Tuition reimbursement, • Vision insurance

Protecting What Matters. Powering the Future of Naval Technology. Your work here has global impact. From developing sonar and radar systems to advancing unmanned and undersea platforms, our technologies empower the U.S. Navy and allied forces to operate in some of the world's most complex environments. As the maritime and underwater battlespace evolves, we continue to push boundaries-driven by innovation, accountability, and a shared commitment to excellence. Join us as we shape the future of naval warfare-safeguarding the seas and strengthening navies worldwide. Nationality Requirements Due to the nature of the programs we support, certain roles may require candidates to meet U.S. nationality requirements and be eligible to obtain a security clearance. Position Summary Your mission: As a Project Engineer, you will lead the technical execution of critical development and production programs that directly support national defense. You will own engineering outcomes from proposal through delivery, ensuring performance, cost, schedule, and quality objectives are met while guiding multidisciplinary teams toward mission success. This role is ideal for an experienced engineering leader who thrives in complex environments, influences decisions through technical expertise, and takes pride in delivering programs that matter. Job Description What You'll Be Accountable For \n • Lead the technical execution of medium-to-large engineering projects and work packages, ensuring delivery within cost, schedule, and quality constraints.\n, • Proposal Technical Volume development\n, • Work Breakdown Structure (WBS) and dictionary\n, • Cost estimates and Basis of Estimate (BOE)\n\n\n, • Apply engineering expertise to solve complex technical challenges while balancing performance, risk, and schedule.\n, • Plan, authorize, and monitor engineering work, providing decisive leadership to keep teams aligned and on track.\n, • Provide technical direction and mentorship to engineering teams, ensuring optimal use of time and resources.\n, • Oversee performance, cost, scope, and schedule for all engineering efforts, including subcontracted work.\n, • Develop and track engineering performance metrics; conduct monthly engineering status and program reviews.\n, • Write technical reports and present findings at peer, design, and program reviews.\n, • Influence program decisions by providing clear, data-driven technical guidance.\n, • Stay current on emerging technologies, tools, and best practices to continuously improve execution.\n, • Support proposal efforts by coordinating across engineering disciplines and managing technical dependencies.\n\n What You Bring Required Skills & Experience \n • Bachelor's or Master's degree in Engineering (or equivalent experience)\n, • 12 or more years' experience as a systems, electrical, mechanical, digital signal processing, or acoustic design engineer\n, • Proven technical leadership experience leading engineering teams (5-10 people).\n, • Strong project leadership skills with the ability to maintain focus on budget, schedule, and technical execution.\n, • Excellent oral presentation and technical communication skills.\n, • Demonstrated ability to plan, organize, and lead complex engineering efforts.\n, • Experience applying project leadership principles such as Earned Value, SPI/CPI, and Cost Account Management (CAM).\n, • Proficiency with Microsoft Office Suite and Microsoft Project.\n, • Ability to clearly communicate risks, impacts, and corrective actions to stakeholders.\n, • Comfortable working in a distributed team environment using collaboration tools.\n, • Active DoD Secret clearance or higher (or ability to obtain).\n, • Experience supporting DoD-funded development programs.\n, • Experience with Earned Value Management System (EVMS)\n, • Experience as a Cost Account Manager (CAM)\n, • Experience with underwater acoustics and/or sonar systems\n\n Why This Role Matters The work you lead here isn't theoretical-it protects people, strengthens national security, and delivers real-world capability to those who rely on it. You'll have the authority to shape technical direction, the responsibility to deliver results, and the opportunity to leave a lasting impact. If you're driven by accountability, technical excellence, and mission success, this is where your leadership belongs. #LI-onsite #li-kp1 Expected Compensation: The expected compensation range for this role is $146,328.00 - $219,544.00 Please note this represents the expected range. Ultra Maritime considers multiple factors when determining final compensation, including the scope and responsibilities of the role, a candidate's relevant experience and education, certifications and training, as well as current business and market conditions. What Ultra Maritime Offers You At Ultra Maritime, we invest in our employees and their well-being: \n • Climate controlled, well-lit and clean work environment!\n, • Work/life balance that includes up to 3 weeks PTO for first year\n, • 8 Paid Holidays, with 3 floating holidays\n, • 401k Plan with Company Match\n, • Educational Assistance Program (Tuition Reimbursement)\n, • Wellness Program and incentives\n, • Company HSA contributions\n, • Insurance Benefits that start 1st of the month following hire\n, • Eligibility in Company Performance-based bonuses annually\n, • Additional Employee Discounts and Perks\n\n Company-Paid Benefits: \n • $75 monthly student loan repayment program\n, • Basic Life Insurance\n, • Basic Accidental Death and Dismemberment (AD&D) Insurance\n, • Short Term Disability\n, • Long Term Disability\n, • Employee Assistance Program (EAP)\n\n Voluntary Employee-Paid Benefits: \n • Medical and Prescription insurance\n, • Dental insurance\n, • Vision insurance\n, • Supplemental Life Insurance Plans\n, • Supplemental AD&D insurance for Employee and Family\n, • Accident Plan\n, • Critical Illness Plan\n, • Hospital Indemnity Plan\n, • Pet Insurance\n, • Identity Theft\n\n Reasonable accommodation statement: if you need an accommodation for any part of the application process, please email [email protected] Equal Opportunity Employer Ultra Maritime is an Equal Opportunity Employer. We are committed to providing a workplace that is fair, respectful, and inclusive, and we make employment decisions based on qualifications, merit, and business needs. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, ancestry, ethnicity, marital status, disability, genetic information, protected veteran status, citizenship status, or any other status protected by applicable federal, state, or local law. As a U.S. defense contractor, Ultra Maritime maintains strict standards related to integrity, compliance, and security. We operate a drug-free workplace and, where permitted by law, may conduct pre-employment background checks and substance-abuse screening based on role requirements. Company: Ultra Maritime #MAR

Job Description A growing Test Instrument and Standards, Manufacturing and Service Company, accessible by T, is seeking an Electronic Test Technician to join its engineering/production group in West Roxbury, MA. Responsibilities will include assembly, troubleshooting, testing, adjusting and calibrating electronic instruments and test equipment, such as: Computer controlled resistance, inductance and capacitance decades Milliohmmeters Megohmmeters Capacitance meters Stroboscopes LCR Meters Requirements: 1. MUST have electronic testing and troubleshooting experience down to component level utilizing schematics, handheld multimeters and other bench instruments., 2. Experience with test instruments including handheld multimeters, Fluke 8508A 8.5 Digit Reference Multimeters, oscilloscopes, resistance, inductance and capacitance standards, 3. Experience with calibration of test equipment, 4. PC skills including Microsoft Excel and Word, 5. Ability to read and follow schematics, assembly procedures and calibration procedures, 6. Good quality soldering and electronic assembly workmanship and skills By combining the many hundreds of man-years of engineering experience of GenRad, esi and IET, we have become the world's preeminent manufacturer of impedance instruments, offering from the most cost-effective to the most stable electrical standards. IET Labs is small enough to offer the individual exceptional service each of our customers deserves, while large enough to offer the worlds most complete impedance solutions with over 1300 different products. While many in the industry outsource not only manufacturing but engineering, IET is proud to claim that we manufacturer 98% of our products in the United States and almost all of our major components are manufactured in the United States.Since 1976, it has been IET Lab's mission is to manufacturer very high-quality instruments at competitive prices while providing a level of hospitality not often found in the industry. \r\n\r\nBy combining the many hundreds of man-years of engineering experience of GenRad, esi and IET, we have become the world's preeminent manufacturer of impedance instruments, offering from the most cost-effective to the most stable electrical standards.\r\n\r\nIET Labs is small enough to offer the individual exceptional service each of our customers deserves, while large enough to offer the worlds most complete impedance solutions with over 1300 different products. \r\n\r\nWhile many in the industry outsource not only manufacturing but engineering, IET is proud to claim that we manufacturer 98% of our products in the United States and almost all of our major components are manufactured in the United States.

Job DescriptionSr. Photonics Design Engineer Job Title: Sr. Photonics Design Engineer Location: Cambridge, MA Compensation: $150K - $250K base DOE plus equity Requirement: 5+ years of Photonic Integrated Circuit (PIC) design, fiber couplers, wavelength multiplexers, thermo-optic phase shifters, electro-optic modulators Position Overview We are seeking a highly skilled Sr. Photonics Design Engineer to join our innovative team. The ideal candidate will have extensive experience in photonics design, with a strong focus on Photonic Integrated Circuits (PICs). This role will involve the design and simulation of both passive and active photonic devices, leveraging cutting-edge tools and technologies to advance our product offerings. Key Responsibilities • Design and simulate photonic integrated circuits (PICs) using Lumerical and IPKISS software., • Develop and optimize passive and active photonic devices for various applications., • Collaborate with cross-functional teams to integrate photonic solutions into larger systems., • Conduct design reviews and provide technical guidance to junior engineers., • Master's degree (PhD preferred) in Electrical Engineering, Physics, or a related field., • 5+ years of experience in photonics design, specifically in PIC design., • Proficiency in Lumerical, IPKISS, and GDSFactory design tools., • Strong understanding of both passive and active photonic device design concepts., • Competitive market-based compensation, • Comprehensive health coverage, including medical, vision, and dental plans for individuals and families, • 401(k) retirement plans with employee matching, • Paid Parental Leave, • Life and disability insurance, • Commuter benefits and subsidies, • Professional growth and mentorship opportunities - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 08/25/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. We are seeking a seasoned Electrical Engineer to serve as Electrical Department Head for our Boston office. This is a high-impact leadership role for an accomplished professional who wants to shape technical excellence, mentor talent, and influence the direction of complex, high-profile projects across mission critical and commercial markets. Some of your responsibilities include the following: • Lead projects in the production of engineering solutions for large scale and complex data centers, and commercial projects; corroborates/coordinates with other design team members including client, site/civil and mechanical engineers to ensure electrical systems are integrated with the project’s goals., • Lead the design and execution of medium voltage (typically 5kV to 35kV) distribution systems for critical infrastructure, industrial plants, or utility substations. Responsible for ensuring system reliability through detailed protection schemes and power system studies., • System Design: Develop detailed engineering designs for MV systems, including the selection and specification of transformers, switchgear, breakers, and cables., • Protection Schemes: Design and implement protection and control (P&C) schemes. This includes developing protective relay settings (e.g., SEL or Basler) and creating relaying diagrams and control schematics., • Prior experience in utility-scale microgrids or renewable energy interconnection., • Execute electrical designs in accordance with the Electrical Department’s Procedures and Standards and specific client standards where applicable., • Understanding of electrical distribution equipment and workspace requirements; general power associated with mission critical data centers and experience with office, laboratories, schools; lighting layout, circuitry and lighting controls., • Use Revit to model electrical system components in accordance with the departments and client’s procedures and standards, • Prepare backup documentation to support design efforts including but not limited to load calculations, voltage drop calculations, lighting power density using ComCheckEZ and lighting illumination levels., • Maintains strong understanding of applicable Codes and Standards Essential Skills & Requirements: • 15+ years of experience designing Electrical systems in high performance facilities including measurable data center experience., • Bachelor of Science degree in Engineering or equivalent experience, • Working knowledge of Revit / BIM is required., • Communication, interpersonal, problem solving and analytical skills., • Experience with mission critical data centers is required., • Professional commitment to sustainability, LEED accreditation is a plus., • A Professional Engineering (PE) license is necessary as you will be the engineer on record for several projects. Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at . This is a high visibility role and the total compensation that we expect to pay for this position is dependent on years of experience, credentials, education, and project portfolio but is expected to be in the $175,000.00 to $225,000.00 range.

Job Description Instrumentation & Electrical Design ● Create instrument lists by examining P&ID drawings ● Research instrumentation (temperature transmitters, pressure transmitters, flow meter, valve actuators, etc...) and select devices appropriate for the project ● Research and select controls hardware appropriate for the project ● Compile submittal documentation for controls and instrument hardware ● Create panel layouts and electrical schematics for controls enclosures ● Procure project hardware ● Provide technical support for panel fabrication technicians ● Inspect completed control enclosures System Design and Configuration ● Lead customer design review meetings ● Configure user interface and HMI screens ● Configure DDC, PLC and/or DCS control algorithms ● Execute internal functional and quality control testing ● Draft system documentation ● Assist is customer demonstrations and acceptance testing Onsite System Startup ● Install project software and configuration onto site systems ● Participate in point to point loop checks for all instrumentation ● Perform software calibration and tuning ● Conduct functional tests of all systems ● Troubleshoot installation discrepancies ● Support additional customer testing ● Program field modifications as required ● Train customer representatives on operations and maintenance of system Technical Experience ● Bachelors Degree in a technical field or related Technical Degree ● 3+ years of experience in related field/industry ● Controls Experience in at least one of the following: ○ Rockwell: FactoryTalk Suite, RS Logix/Studio 5000, familiarity with PlantPAx DCS ○ Aveva System Platform ○ Inductive Ignition Perspective ○ Distech: Experience with BACnet and LON Distech controllers, Eclypse Controllers ● Other useful technologies include: ○ Johnson Controls: Facility Explorer or Metasys controllers ○ Tridium: Niagara N4 ○ SQL ○ Scripting languages (VBA, Python, etc.) ○ Knowledge of Kepware OPC server, ThinManager, VMware is preferred. Company DescriptionHathaway Partners, LLC dba. In-Finite Search Solutions is a national recruiting agency based in Cleveland, Ohio, specializing in finding talented professionals in the manufacturing, technology and legal industries. We offer services that help organizations with strategic recruiting processes, finding and placing highly qualified candidates across various sectors, including IT, sales, marketing, and technical roles. Our agency is dedicated to providing excellent value to clients by saving them valuable time and resources in workforce recruiting and human resources consultingHathaway Partners, LLC dba. In-Finite Search Solutions is a national recruiting agency based in Cleveland, Ohio, specializing in finding talented professionals in the manufacturing, technology and legal industries. We offer services that help organizations with strategic recruiting processes, finding and placing highly qualified candidates across various sectors, including IT, sales, marketing, and technical roles. Our agency is dedicated to providing excellent value to clients by saving them valuable time and resources in workforce recruiting and human resources consulting

Job DescriptionWe are seeking a highly skilled and detail-oriented Commissioning Engineer to join our team. As a Commissioning Engineer, you will play a crucial role in ensuring the successful installation, startup, and testing of mechanical, electrical, plumbing, and control systems for complex projects. This is an exciting opportunity to be involved in all stages of capital construction project delivery and ensure that all systems meet the required specifications, quality standards, and safety regulations. Key Responsibilities:Oversee and execute the commissioning process of MEP and control systems for projects.Conduct thorough inspections, testing, and troubleshooting of equipment and systems to ensure they meet design specifications.Develop and implement detailed commissioning plans, including testing schedules, procedures, and required documentation.Develop system specific Pre-Functional Checklists and Functional Performance Test protocols. Assist with design review of MEP systems. Assist with coordination of field activities and work alongside technicians and trade partners during the construction and testing phases.Perform functional performance tests to verify system performance against design parameters.Troubleshoot and resolve any issues during the commissioning process to ensure systems operate efficiently and safely.Prepare and review test reports, commissioning documentation, and final project handover packages.Ensure compliance with relevant codes, standards, and safety regulations.Assist the project manager with commissioning deliverable and activity tracking.Collaborate with project managers, engineers, and other stakeholders to ensure smooth project execution and timely delivery.Maintain detailed records of commissioning activities and results for future reference. Qualifications:Bachelor’s degree in Engineering (Electrical, Mechanical, or related field).Proven experience as a Commissioning Engineer, preferably in life sciences, semiconductors, or other mission critical industries.Strong knowledge of electrical, mechanical, and control systems.Familiarity with commissioning procedures, testing methodologies, and industry standards.Proficiency in reading and interpreting technical drawings and specifications.Excellent troubleshooting, problem-solving, and analytical skills.Ability to work independently and as part of a team in a fast-paced environment.Strong communication skills, both written and verbal.Attention to detail and a strong commitment to safety and quality.Ability to travel to job sites as required, including travel out of state, as needed. Preferred Skills:Certifications in relevant fields (such as CCP, CxA, BCxA, LEED, PMP, etc)Experience with specific commissioning/construction software and tools such as Cx Alloy, Kneat, Procore, ACC, Bluebeam, etcKnowledge of industry-specific standards and regulations. About CAICAI is a 100% employee-owned company established in 1996, that has grown year over year to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and consulting services related to operational readiness to FDA regulated and other mission critical industries. Are You Ready?Our approach is simple; we put the client’s interests first, we do not stop until it is right, and we will do whatever it takes to get there.As owners of CAI, we are committed to living our Foundational Principles, both professionally and personally:We act with integrityWe serve each otherWe serve societyWe work for our future With employee ownership, one person’s success is everyone’s success; we work diligently to accomplish team goals. We place Team Before Self, demonstrate Respect for Others, and possess a can-do attitude. That is how we have grown exponentially. BenefitsOur full-time positions offer competitive compensation and benefits which include: up to 15% retirement contribution, 24 days PTO and 5 sick days per year, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company.#LI-MV1 #MISSIONCRITICALAverage base salary range - not including benefits, and potential overtime and/or Cost of Living Adjustment. CAI Benefits:•Comprehensive Health Insurance coverage•24 days of Paid Time Off•ESOP/401K - 15% Company Contribution (US Only)•Company paid Life Insurance•Company paid Long Term DisabilityWe are an equal opportunity employer; we are proud to employ veterans and promote diversity and inclusion in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all – our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Chance Act (FCA) / Fair Chance Ordinance (FCO). We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the team: The Fleet Operations Team is responsible for delivering uptime, performance, and visibility across Formic's growing fleet of deployed robotic systems. Operating at the intersection of automation engineering and real-world factory environments, the team ensures systems remain reliable, supported, and continuously improving. Fleet Operations plays a critical role in protecting customer production, reducing downtime, and strengthening long-term automation performance across a variety of robotic OEMs and manufacturing sectors. About the role: As a Robotics Field Service Engineer, you will serve as the front line of technical execution across Formic's deployed robotic cells. You will diagnose and resolve issues, perform preventative and corrective maintenance, support production environments, and represent Formic directly at customer sites. This role requires strong troubleshooting ability, composure under pressure, and disciplined documentation. Your work will directly impact fleet uptime, customer satisfaction, and system reliability. In this role you will: • Perform preventative, corrective, and predictive maintenance on robotic manufacturing cells, • Respond to remote and on-site escalations, diagnose root causes, and restore systems to operational status, • Support customer production environments and provide hands-on technical guidance to operators and technicians, • Log all service activity, asset updates, and spare part needs in CMMS tools such as MaintainX, • Coordinate scheduling and in-field support with customers, vendors, and internal teams, • Monitor system performance remotely using Formic dashboards and monitoring tools, • Document service work, root cause analysis, and follow-up actions with clarity and accuracy, • Identify recurring failure patterns and escalate systemic issues for broader improvement, • Build professional, trusted relationships with plant managers and site personnel, • Represent Formic with professionalism, safety compliance, and a customer-first mindset, • Participate in RCA sessions, site audits, and internal improvement initiatives, • 3+ years of hands-on field service experience supporting robotic or industrial automation equipment, • Strong troubleshooting skills across electrical, mechanical, and PLC or robotic control systems, • Ability to read electrical schematics, wiring diagrams, and pneumatic drawings, • Experience using CMMS platforms to track and report maintenance activity, • Comfortable with local travel up to 80% and overnight travel up to 50%, • Clear written and verbal communicator capable of producing structured service reports, • Experience with 6-axis robot brands such as Fanuc, KUKA, Yaskawa, ABB, or Universal Robots, • Familiarity with palletizing, case packing, pick-and-place, or conveyor systems, • Experience in food, beverage, packaging, CPG, or other high-speed manufacturing environments, • Prior customer-facing field experience, • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses Final offers are customized based on experience, geographic location, market considerations, and a candidate's preferred balance of cash and equity. Our goal is to attract and reward top talent who will have significant impact, and we are open to thoughtful discussions to align on the right structure. Compensation Range:$75,000—$120,000 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit. Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to . AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job Description COMPANY DESCRIPTION: A career here is life-enhancing. At Syner-G, we enable our people to build careers that impact positively on their quality of life. Through our expertise, insight, consulting and management skills, we accelerate breakthrough science and delivery of life-enhancing therapies to more patients. We work across a diverse range of clients and projects, supporting many organizations from the most critical phases of the drug discovery and approval process through to commercialization. It is meaningful, varied and thought-provoking work with a strategic emphasis, a solutions-driven approach and significant, real-world outcomes, from science to delivery/success. Underpinning this mission is a culture that aligns perfectly with what we want to achieve. We enable our people to grow, we support them in their learning and we reward them in so many different ways. In return, they play an instrumental role in maintaining our reputation across the globe as a strategic biopharma product development and delivery partner. Syner-G was recently honored with BioSpace's prestigious "Best Places to Work" 2026 award, for the third consecutive year, along with many other award-winning programs to make a career here truly life-enhancing. These recognitions are a testament to our commitment to fostering a positive and engaging work environment for our employees, with a particular emphasis on culture, career growth and development opportunities, financial rewards, leadership and innovation. At Syner-G, we recognize that our team members are our most valuable asset. Join us in shaping the future, where your talents are valued, and your contributions make a meaningful impact. For more information, visit POSITION OVERVIEW: We are seeking a Facilities Engineer with experience in the management, execution, and day-to-day support of building and plant operations, including labs, manufacturing plants, utilities, equipment, and systems. The ideal candidate will perform routine inspections, maintain documented records, and be on-call for emergencies, ensuring compliance with regulatory requirements and GMPs. Effective communication and collaboration with various departments are essential to meet the facility's needs and quickly resolve any issues. We are actively seeking qualified candidates to join our talent pipeline for future client engagements. WORK LOCATION: Travel to client sites may be required up to 100%, based on project demands and client expectations. KEY RESPONSIBILITIES: (This list is not exhaustive and may be supplemented and changed as necessary.) • Schedule, coordinate, and oversee outside service providers for routine CM and PM Program tasks provided under building, system, or equipment maintenance contracts., • Support verification and maintenance with PIDs, HVAC, electrical, one-lines, and process flow diagrams (PFDs)., • Ensure all Corrective Maintenance and Preventative Maintenance Program tasks are completed and documented properly according to policies and procedures., • Perform, schedule, coordinate, and oversee emergency troubleshooting and repair on various HVAC, mechanical, utility systems, and lab and manufacturing equipment (GxP and non-GxP)., • Perform routine inspections of equipment and facility utilities to identify any issues before they become major problems, looking for signs of wear, leaks, or any abnormalities., • Maintain documented records of inspections, preventative maintenance activities, and any repairs following approved SOPs and Work Instructions to ensure compliance, audits, and tracking the overall state of the facility, utilities, and equipment., • Respond to alarms and emergencies, such as equipment failures or power outages, with a clear understanding of the facility's emergency response procedures., • Work closely with other departments, such as engineering, manufacturing, quality control, and research and development, ensuring effective communication to meet the facility's needs., • Troubleshoot systems to quickly identify and resolve issues. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the education, experience, skills, knowledge, and abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties. Education: • Minimum of 2-6 years of Project/Facilities Engineering experience or experience working as a General Contractor, Construction Manager, or Subcontractor., • Facilities background preferred., • Process Equipment experience., • CAPEX experience., • GMP cleanroom experience., • Adhere to all procedures, safety protocols, wear appropriate personal protective equipment (PPE), and be aware of emergency procedures., • Familiarity with regulatory requirements and good manufacturing practices (GMPs)., • Must have strong collaboration, communication, prioritization, and problem-solving skills. Physical Demands: The physical demands described here are representative of the requirements that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use a computer keyboard and mouse; reach with hands and arms; talk and listen. The employee is frequently required to walk and sit, as well as to lift and carry objects such as books and files weighing up to 25 pounds. The employee is occasionally required to stand, stoop, or kneel. Specific vision abilities required by this position include close vision and the ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job, including moderate noise level, an indoor temperate environment, and light levels that are bright and conducive to minimal eye strain, typical for an office environment. TOTAL REWARDS PROGRAM: We define total rewards as compensation, benefits, remote work/flexibility, development, recognition, and our culture with programs that support each of our reward pillars. This includes a market competitive base salary and annual incentive plan, robust benefit offerings, and ongoing recognition and career development opportunities. Employees also enjoy our generous flexible paid time off program, company-paid holidays, flexible working hours, and fully remote work options for most positions and the ability to work "almost anywhere." However, if a physical work location is more for you, we have office locations in Greater Boston; San Diego, CA; Boulder, CO; and India. Currently, Syner-G is unable to sponsor or take over sponsorship of an employment Visa at this time. LEGAL STATEMENT: Syner-G is proud to be an Equal Employment Opportunity and Affirmative Action employers. All employment decisions, including the recruiting, hiring, placement, training availability, promotion, compensation, evaluation, disciplinary actions, and termination of employment (if necessary) are made without regard to the employee's race, color, creed, religion, sex, pregnancy or childbirth, personal appearance, family responsibilities, sexual orientation or preference, gender identity, political affiliation, source of income, place of residence, national or ethnic origin, ancestry, age, marital status, military veteran status, unfavorable discharge from military service, physical or mental disability, or on any other basis prohibited by applicable law. Syner-G is an E-Verify employer.

Job Description Meet the Team Step into a team of Master Builders where ambition meets action and every challenge sparks innovation. Here, complexity isn’t just managed—it’s transformed into opportunity. We set the bar high, drive growth at every turn, and make every project a showcase for new standards. Thrive in a fast-moving environment where commitment, collaboration, and respect go hand-in-hand—and where we believe working hard is even better when you’re surrounded by great people. Your Mission As our MEP Superintendent, you’ll lead integrated planning and field coordination for Mechanical, Electrical, Plumbing, and Fire Protection systems from preconstruction through turnover. You’ll drive safety, schedule, budget, and quality to new heights, orchestrating in-house MEP professionals, subcontractors, and vendors to deliver best-in-class results. We expect a lot—because we believe in your potential. Whether you’re new in your role or a seasoned professional, we’ll meet you exactly where you are, offering mentorship, leadership development, and training so you can grow, lead, and make your mark as a true Master Builder. Your Role What We Expect • A Master Builder mindset—ready to turn complexity into momentum and set new standards., • Experience in MEP field supervision, coordination, and project management., • Commitment to working hard, treating people well, and thriving in a supportive, high-expectation culture., • Strong communication, leadership, and relationship-building skills. Grow with us—this role is a launchpad to Sr. Superintendent, Client Executive, Vice President, and beyond. Ready to Build the Extraordinary? Apply now and join Master Builders who set the pace, raise the bar, and help you win.

Job Description Direct Counsel is seeking a Patent Litigation Associate Attorney to join a dynamic team at a top Am Law 100 firm. Candidates may sit in their San Diego, San Francisco, Boston, Washington, Los Angeles, Miami, or New York office. This is a great opportunity for an associate with patent litigation experience who is looking to grow in a highly collaborative environment and handle cutting-edge technology cases. About the Patent Litigation Section The patent litigation practice is at the forefront of IP law, offering a comprehensive range of services with a focus on patent litigation. The team’s deep understanding of client technologies and business goals drives successful litigation strategies, whether defending against infringement claims or enforcing patent rights. The firm works with clients across the technology sector to develop and execute litigation strategies that align with their commercial objectives. Responsibilities The associate will: • Prepare and try patent matters, including Markman hearings and technical analysis of patents and products., • Manage discovery, work with experts, and conduct and defend depositions., • Draft pleadings and motions related to patent litigation., • JD or LLM from an ABA-accredited law school., • Admission to or eligibility for admission in California., • 2+ years of patent litigation experience in district court and/or before the International Trade Commission., • A technology background in electrical engineering, computer science, or a related field is preferred., • Strong written and verbal communication skills., • Ability to collaborate effectively in team settings and engage professionally with clients. This Am Law 100 firm has over 500 attorneys and offers legal expertise, business insight, and industry knowledge to help clients navigate complex challenges. The firm advises clients on a wide array of legal matters, from business transactions to regulatory issues. With offices in key locations including San Diego, San Francisco, Boston, Los Angeles, and New York, the firm is strategically positioned to serve clients globally. Compensation The salary range for this position is $235,000 to $390,000, with bonus eligibility. The firm offers a comprehensive benefits package. This role is an excellent opportunity for an associate to join a top-tier firm in a collaborative and innovative environment, working on high-profile patent litigation matters.

Job Description Salary: $67,000-$77,000 Founded in 1996, Waveguide LLC is an internationally renowned independent consultant in audiovisual design, information technology design, acoustics consulting, on-site technology management and workplace data analytics. Waveguide is headquartered in Charlotte, North Carolina, with regional consulting locations in Atlanta, Los Angeles, New York, Chicago, Houston, Raleigh, Tampa and Portland. Our award-winning designers and consultants create world-class communication environments that look as good as they perform. And our data analytics solutions empower facility managers with the resource insights they need to optimize building performance and our clients’ technology investment. Our trusted AV operations teams are among the most experienced and highly qualified in our industry. They are at our clients’ side to tackle the daily technical and logistical challenges of their meetings and events so they can focus on what matters most. At Waveguide, we build relationships. Whether it’s your relationship with a client, or the relationship of a technology system to its environment, our success and the success of our clients depends on how we apply our expertise to meet our clients’ needs. Together, we help create strategic technology plans that reflect the way people live, learn and work. We help design efficient buildings and infrastructure that save dollars and make sense. And we design effective technology systems regular people can actually use. But we’re only as good as our people. We are seeking associates who are passionate, creative thinkers and who will be tirelessly dedicated to building lasting relationships and finding innovative answers to our clients’ most challenging questions. Within Compass Group, Waveguide is part of the Eurest family that provides dining services to local, regional and national companies across the United States. Services include operating employee dining centers, on-site catering, executive dining rooms, and other managed services. Job Summary Job Summary • "Recruiter customize based on specifications of the job.", • Oversees testing, maintenance, asset management, operation, and tear down of audiovisual (AV) and videoconference (VTC) equipment; (e.g., video data projection systems, computers, audio- and videoconference equipment, microphones, video cameras, audio systems, and operation of integrated AV systems)., • Provides best effort assistance to fulfill any audiovisual technical requirements as assigned., • Provides a monthly report containing room usage data, open action items, equipment maintenance, and upcoming preventive maintenance schedules., • Maintains the process used to create trouble tickets, customer issue resolution logs, and asset management., • Executes all aspects of videoconference support including call set up, end user training, troubleshooting, and follow through on escalation of issues., • Provides consultation and education to all levels of end users on presentation technologies., • Troubleshoots audiovisual and videoconferencing related technology (various projectors, control systems, audio and videoconferencing)., • Maintains conference room integrity., • Performs regular preventive maintenance checks (e.g., either report or address issues such as cable management issues, safety standards noncompliance, etc.)., • Escalates housekeeping and technical issues outside of AV and conferencing technology and applications to appropriate department., • High School diploma or equivalent a must, • Three to five years audiovisual technology management experience, • Three to five years AV and presentation technologies experience, • Three to five years customer service experience, • Thorough working knowledge of the operation and troubleshooting of AV and videoconferencing related technology, • Strong customer service and communications skills required, • Working knowledge of Microsoft Office (Word, Excel, Lync, PowerPoint, Outlook), • Ability to facilitate tasks with internal and external staff to assure meeting and event success, • Understanding of normal business and office procedures, • Experience working in a fast paced university/conference center environment, • Self-motivated independent thinker, • A CTS certification by InfoComm, • Industry relevant training or technical courses a plus Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Certain positions may require Florida Level 2 background screening. Details: Associates at Waveguide are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Paid Parental Leave, • Holiday Time Off (varies by site/state), • Personal Leave, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Applications are accepted on an ongoing basis. Waveguide maintains a drugfree workplace. Req ID: 1510605 Waveguide XUE BAI [[req_classification]]

Job Description About Vizgen: Vizgen is a rapidly growing company that has commercialized the next generation of single cell spatial genomics tools that enable researchers to gain new insight into the biological systems that underlie human health and disease. The company's groundbreaking MERSCOPE product utilizes MERFISH spatial transcriptomics technology to image RNA molecules with high accuracy and unrivaled detection efficiency at subcellular resolution. MERFISH provides transformative insight into a wide range of tissue-scale basic research and translational medicine in oncology, immunology, neuroscience, infectious disease, developmental biology, and regenerative medicine. For more information, go to The Role: Reporting to Vizgens Field Service Manager and working closely with Vizgen’s Support and Product team members, the Senior Field Service Engineer will provide expert instrument support to customers in the Eastern part of North America for the Vizgen’s MERSCOPE solution. MERSCOPE is an in-situ single cell, spatial omics platform that includes reagents, instrumentation, and analysis software. We are seeking an experienced field support engineer with complex scientific problem-solving skills and the ability to understand and implement solutions to meet customer needs. Responsibilities: • Provide instrument and support coverage for customers in the EMEA territory for installation, preventative maintenance, upgrades, troubleshooting, and repair, • Become subject matter expert on Vizgen’s MERSCOPE technology, including instrumentation, software, network communications, and commercial integration of the platform, • Develop a working knowledge of Vizgen’s consumables with respect to how they impact the performance of the platform, • Work directly with external and internal customers to record complaints, investigate underlying causes, and identify short term or long-term solutions, • Support onboarding of new customers through installation and training on Vizgen’s platform, • Respond promptly to service requests and inquiries to ensure a positive customer relationship, • Document and track customer issues, troubleshooting, and resolutions, • Track, prioritize, and ensure issues are resolved within specified SLA’s, • Work closely with management and other team members to solve technical issues, provide product improvement feedback, and ensure customer satisfaction, • Support coordination, scheduling, and tracking of instruments, service parts, accessories, and tools, • Responsible for editing, writing, and modifying Service and Training manuals, Field Service Bulletins, and SOPs, • Support the selling and management of service contracts, • Train and support field service engineer colleagues as needed, • Travel as needed to support customers on site, • Engineering Bachelor’s Degree or equivalent in biomedical, electrical, mechanical or related field, • 5+ years work experience with at least 3 years as a field service engineer in the life sciences research or diagnostic industry, • Experience with imaging, sequencing, or fluidics instrumentation preferred, • Valid driver’s license, US Passport, and good driving record, • Available to accommodate significant overnight travel, • Ability to lift boxes and equipment up to 60 pounds, • Ability to analyze and manipulate data to understand trends, customer needs and root cause issues, • Proven ability to quickly develop expertise, multi-task, embrace change and innovate in a fast-paced environment., • Excellent communication, interpersonal, and customer interfacing skills, • Highly motivated and successful individual who can build and maintain a positive attitude in a challenging, and fast-paced work environment, • High sense of urgency for resolving customer issues, • Highly organized, disciplined, and efficient in meeting deliverables Vizgen affords equal employment opportunity to all qualified persons regardless of race, color, religious creed, national origin, age, military status, sexual orientation, disability, genetic information, gender identity, gender expression or gender unless based upon a bona fide occupational qualification.

Job DescriptionDescription: The ADA Forsyth Institute was founded in 1910 as the Forsyth Dental Infirmary for Children (later, the Forsyth Institute), to provide dental care to the disadvantaged children of Boston. While continuing to serve children in need, yet recognizing the ultimate goal is to prevent dental disease, the Institute in 1915 began to focus on scientific research and is today the world’s leader in oral health research. In October of 2023, the Institute joined with the American Dental Association to form the ADA Forsyth Institute, a 501(c)(3) entity dedicated to improving people’s oral and overall health and powering the profession of dentistry through cutting-edge basic research, creative translational science, innovative clinical technologies, and global public health outreach. Consistent with the Institute’s founding mission, the ADA ForsythKids mobile dental program continues to serve children in need. ADA Forsyth, an independent not-for-profit research organization, is located in the Brick bottom District of Somerville, in a newly built life-science building. We are in close walking distance to restaurants, the Community Path, and T & bus routes for easy commuting. We are seeking a highly motivated Research Associate (Bioengineering) to support the development of an innovative point-of-care diagnostic device incorporating CRISPR-based assays. This role will contribute to the design, prototyping, and integration of diagnostic device technologies, including microfluidic systems, optical detection modules, and overall system architecture. The Research Associate will collaborate closely with interdisciplinary teams, including molecular biologists and assay scientists, to integrate CRISPR chemistry into a functional diagnostic platform. This position offers an exciting opportunity to contribute to cutting-edge diagnostic technology development in a fast-paced research environment. Key Responsibilities • Design, prototype, and optimize microfluidic and integrated device components, • Integrate fluidics, optics, electronics, and assay chemistry into a cohesive device platform, • Develop and implement fluorescence-based detection modules, • Collaborate with molecular biology teams to adapt and optimize assays for device compatibility, • Troubleshoot device performance, including fluid dynamics, signal detection, and assay integration, • Bachelor’s degree in Bioengineering, Biomedical Engineering, Mechanical Engineering, Chemical Engineering, Electrical Engineering, or related field with 2–3 years of relevant industry experience, OR, • Master’s degree in a related engineering discipline, OR, • Experience integrating biochemical or molecular diagnostic assays into engineered platforms, • Familiarity with CRISPR-based detection systems or nucleic acid amplification technologies, • Experience with device validation, verification, and technology transfer, • Working knowledge of molecular biology techniques (e.g., PCR, DNA purification), • Experience improving assay robustness and performance within integrated systems, • Proficiency in Python or R for data analysis and automation ADA Forsyth is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, gender identity, sexual orientation, pregnancy and pregnancy-related conditions or any other characteristic protected by law. Requirements:

Job Description Nova Biomedical: One Global Brand. One Vision. Together under one name. Advanced Instruments and Nova Biomedical are now united under one brand, Nova Biomedical, marking a major milestone in our journey to deliver greater value to our customers. By combining our strengths, we're accelerating innovation, supporting critical workflows, and delivering world-class service across the biopharmaceutical and clinical markets. About the company At Nova Biomedical, we’re not just building instruments, we’re powering breakthroughs that improve lives. Our smart, science-driven solutions are trusted in over 100 countries to speed drug development and enhance patient care. Our integration brings together more than 70 years of scientific excellence with Nova’s cutting-edge innovation, forming a powerhouse of precision, purpose, and possibility. With FDA-registered, ISO-certified manufacturing, more than 125 FDA approvals, and industry-trusted diagnostics, we’re setting new standards in quality and reliability. Nova Biomedical is proud to be a global leader in osmolality testing and biotechnology and in vitro diagnostic (IVD) instrumentation, dedicated to advancing patient care and scientific discovery with a legacy that continues to shape the future of life sciences. With headquarters in Norwood and Waltham, Massachusetts, and a global team of nearly 2,000 employees, we’re building a collaborative, empowered culture grounded in shared values: Customer Centricity, Ingenuity, Ownership & Accountability, Collaboration, and Integrity. Working at Nova Biomedical means joining a mission-driven organization where your contributions matter. Whether you're in engineering, science, manufacturing, or support, you’ll be part of a team that values innovation, invests in your growth, and is committed to making a real-world impact on global health. Explore what’s next with us at novabiomedical.com About the role Nova Biomedical is building its next generation of automation capabilities across multiple manufacturing sites and is seeking a hands-on Automation Engineer with strong manufacturing support experience, proven mechanical/electrical troubleshooting ability, and a developing skill set in automation integration. This role will support production operations and lead or assist automation equipment projects across our Massachusetts sites, with focus areas that include improving quality, efficiency, capacity, and ergonomics; sustaining and troubleshooting production equipment; and building the foundation for equipment data integration – SCADA/AVEVA Wonderware, OSIsoft PI Historian, and future MES/EBR enablement – in a regulated environment. The ideal candidate brings experience supporting automation equipment and a strong desire to grow further into controls, integration, and digital manufacturing. If you’re passionate about automation engineering and want to be part of a team that is shaping the future of life sciences, we’d love to hear from you, apply today! What you’ll do Manufacturing Support & Troubleshooting • Own daily technical support for manufacturing equipment across Waltham, Norwood, and Billerica., • Diagnose and resolve issues across mechanical, electrical, pneumatic, and basic control systems., • Coordinate with onsite electricians and technicians to minimize downtime and improve reliability., • Conduct informal system reviews and drive mechanical/controls improvements.Automation & Equipment Projects, • Lead the design, installation, and qualification (IQ/OQ/PQ) of new automation systems, including:, • Robotics/cobots, palletizers, automated dispensing systems, • Vision inspection systems, • Mechanical upgrades and OEM equipment, • Own the creation and execution of URS (User Requirements Specifications) and FRS (Functional Requirements Specifications) for automation projects., • Manage vendor selection, FAT/SAT, and commissioning, ensuring scope, schedule, and quality objectives are met.Controls & Integration (Growing Responsibility Area), • Own and execute connections between equipment and supervisory/data systems, including:, • SCADA / AVEVA Wonderware, • OSIsoft PI / PI Historian, • PLC/HMI platforms (Allen-Bradley, Siemens, etc.), • Future MES / EBR systems, • Resolve PLC/HMI issues (hands-on programming not required; commitment to learn expected)., • Standardize integration templates (tags, alarms, connectivity) as Nova matures its digital architecture.Documentation, Compliance & Validation, • Author and maintain engineering documents: URS, FRS, change controls, test protocols., • Maintain drawings and technical documentation in Nova’s systems (J-Drive, I-Drive, MasterControl)., • Deliver validation packages (IQ/OQ/PQ) in ISO 13485 / FDA QSR environments.Cross-Functional Collaboration, • Partner with Manufacturing Engineering, Safety, Quality, Operations, Facilities, and R&D to deliver results. What we are looking for in you • Advanced mechanical and electrical troubleshooting capabilities., • Strong mastery of PLC systems (Allen-Bradley, Siemens) – required, not optional., • Strong understanding of controls engineering, industrial automation architecture, sensors, instrumentation, motion, and communication protocols., • Experience with SCADA, PI Historian, and equipment data integration – required., • Hands-on experience with robotics/cobots, automated systems, and industrial vision systems., • Proficient in SolidWorks and AutoCAD for equipment and system documentation., • Experienced in writing and maintaining URS, FRS, validation documents (IQ/OQ/PQ), test protocols, and change controls., • Proficient with Microsoft Office, Minitab, and SAP., • Strong analytical and problem-solving abilities with a continuous improvement mindset., • Ability to manage multiple automation projects simultaneously from concept through deployment., • Excellent written and verbal communication skills., • Strong cross-functional collaboration with Manufacturing Engineering, Quality, Operations, Facilities, and R&D., • Hands-on, proactive approach with strong floor presence., • Ability to prioritize and manage work across multiple sites., • Motivated to grow into advanced controls integration, SCADA/MES development, and enterprise-level automation strategy., • Bachelor’s degree in Mechanical, Electrical, Mechatronics, or related engineering field, or equivalent hands-on experience., • Minimum of 8 years of experience in automation and/or manufacturing floor support, preferably within medical device, diagnostics, biotech, or other regulated industries., • Proven experience supporting automation systems, equipment integration, and troubleshooting., • Demonstrated experience delivering URS/FRS, engineering specifications, FAT/SAT, and technical documentation., • Ability to read, create, and interpret mechanical drawings, electrical schematics, PLC/HMI logic flow, and system documentation., • Hands-on experience with:, • PLC programming software (Rockwell Allen-Bradley Studio 5000, Siemens, or equivalent), • HMI platforms, • Vision systems (Cognex, Sherlock, or similar), • Robotics / cobots, • Experience with manufacturing data and automation platforms:, • SCADA / AVEVA Wonderware, • OSIsoft PI / PI Historian, • Equipment connectivity and data integration, • Experience working in regulated environments, including ISO 13485, FDA QSR, GDP, GMP., • Familiarity with CMMS systems (e.g., Mpulse)., • Must live within commuting distance of Waltham, Norwood, and Billerica (no relocation assistance provided)., • Willingness and flexibility to travel regularly across Nova’s Massachusetts sites based on business need., • Ability to stand and walk for extended periods while on the production floor or in the lab (up to 4–6 hours/day)., • Ability to lift, carry, push, or pull items up to 25–30 pounds occasionally (e.g., reagent containers, lab equipment)., • Manual dexterity to handle lab tools, open containers, operate equipment, or input data into systems., • Ability to climb stairs or ladders occasionally to access equipment or elevated workspaces., • Visual acuity and color vision sufficient for reading labels, monitoring equipment displays, and identifying chemical indicators or reactions., • Ability to wear personal protective equipment (PPE) including lab coats, gloves, goggles, face shields, and respiratory protection, as required., • Ability to work in various operations such as chemical processing, PCB, warehouses, analyzer assembly, consumable processing of sensors and strips., • Flexible Medical, Dental, & Vision Coverage, • Competitive 401k company match, • Bonus Program, Generous PTO and paid holidays, • Generous Tuition reimbursement, • Hybrid and flexible work arrangements (job specific), • Professional development, engagement and events, • Company marketplace for lunch and snacks! (location specific) Schedule/Hours: Monday to Friday, 8:00am – 5:00pm Targeted Salary Range: $120k - $130k per year Nova Biomedical believes in transparency and integrity throughout all we do, including compensation. The provided salary range for this role represents the expected base salary or hourly rate for this opening. Actual compensation will be commensurate with the candidate’s experience and may vary based on individual factors such as location, skills, and education. EEO Statement: Nova Biomedical takes pride in being an equal opportunity employer committed to hiring a diverse and inclusive workforce. As a part of our commitment to a diverse and inclusive workforce, Nova Biomedical will continue to take steps to assure that recruitment, hiring, assignment, promotion, compensation, and all other personnel decisions are made and administered without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, gender expression, veteran status, age, mental or physical disability, genetic information or any other protected class. Privacy policy