Electrical jobs in St Louis, MissouriCreate job alerts

It's more than a career, it's a calling MO-SSM Health Saint Louis University Hospital 1201 Grand Worker Type: Regular Job Highlights: Job Summary: The respiratory therapist is a healthcare professional employed to perform all respiratory care diagnostic and therapeutic procedures provided by the Department of Respiratory Care. They should be energetic and motivated to support the success of a growing service. The respiratory therapist should refer to supervisory personnel in any doubtful situation. Job Responsibilities and Requirements: POSITION ACCOUNTABILITIES AND PERFORMANCE CRITERIA (% of time) The following are essential job accountabilities: 1. Demonstrate ability to relate to coworkers in a professional and respectful manner, in order to assure and promote a culture of safety., 2. Performs all respiratory related therapeutic and diagnostic maneuvers are carried out in accordance with established policies and procedures of the department. This shall include: (50%) Criteria: A. Implements and assess the function of oxygen and therapeutic gas. B. Ensure proper set-up and implementation of therapeutic and diagnostic procedure. C. Provide aerosolized medication. D. Provide CPT and IPV. E. Setup and monitor ventilators in accordance with the department and hospital policies. F. Communicates with peers and staff to develop and improve inter- and intradepartmental services. Meet with appropriate personnel to address and resolve problem issues. G. Performs CPR H. Perform diagnostic procedures including but not limited to: 1. ABG analysis, 2. Pulse Oximetry, 3. Nitric Oxide pulmonary hypertension studies, 4. The licensed respiratory therapist will ensure that each patient’s status is assessed to determine the patient’s care needs and to ensure patient’s needs are reassessed in response to treatment and care provided. Criteria: Assess and reassess patients for therapy which includes but is not limited to: A. Vital signs before and after therapy. B. Breath sounds before and after therapy. C. Checking for physician orders for therapy. D. Pre and post assessment for therapy tolerance and response. E. Oxygen requirements. F. Sputum color, viscosity and quantity. G. Other patient specific observations as needed. 4. Special duties: Ability to interact with physicians and nurses. May work in an intensive care unit area. This may include: (25%) Criteria: A. Responsible to respond to critical areas (e.g. ER, OR, Code). B. Perform routine checks on Life Support Unit. C. Assist with bronchoscopy procedure. D. Assist with minor cardiopulmonary invasive or surgical procedures. E. Perform tracheotomy care. F. Perform bedside studies including: f/vt, shunt studies, ventilator mechanics dead space, compliance, O2 content, and metabolic cart studies. G. Perform bedside pulmonary function procedures. H. Interpretation of complex lab data. I. Provide input in decisions involving patient care on and off life support systems. J. Provide input on patient care via physician consultations. K. Display qualities of an independent thinker through the performance of everyday job duties. L. Assist with the prevention of ventilator associated pneumonia as indicated by the latest evidence based literature. 5. Perform all other aspects of Respiratory Care in accordance with hospital policies and procedures. (5%) Criteria: A. Attends monthly department meetings, specialty meetings, in-services, and any other meetings as required. B. Assure all time and attendance exceptions are properly recorded in the exceptions book. C. Communicates with physicians in regard to therapies ordered and therapeutic goals. The following job accountabilities may be reassigned: 6. Performs other duties as required. (5%) Criteria: A. Cleaning, disinfecting and/or sterilization of all reusable of respiratory and bronchoscopy equipment. B. Routine mechanical maintenance of respiratory equipment. C. Maintain neat and clean work and storage areas. D. Maintain neat and accurate records. E. Answer phone in a professional and timely manner. 7. Safety/Infection Control: Practices according to safety and infection control policies. (1, 2, 3, 4, 5) 5% Criteria A. Practices universal precautions and disposes of hazardous wastes per established guidelines. B. Maintains a safe, clean, comfortable and therapeutic environment for patients/families/employees in accordance with hospital standards. 1. Maintains clutter free environment., 2. Keeps conversations and background noise to a minimum., 3. Adheres to dress code. C. Reports risk management concerns. D. Assumes responsibility for completing all annual mandatory requirements: 1. Safety/Fire, 2. Blood Borne Pathogen, 3. Hazardous Communication, 4. TB, 5. Department Specific, 6. Age Appropriate Care (for clinical staff only), 7. BLS/ALS per recertification guidelines of AHA E. Work in a constant state of alertness and safe manner. 8. Service: Provides service excellence to the customers of Saint Louis University Hospital by delivering timely, high quality care in a courteous, and respectful manner. (1, 2, 3, 4, 5) 10% Criteria: A. Explain therapy to the patient prior to initiation. B. Being courteous to the patient, their family, visitors and co-workers. C. Respects patients’ rights. D. Practice commitment of patient confidentiality. 8. Quality Improvement (QI): Incorporates Quality Assessment into one’s daily work. 5% Criteria: A. Assisting with collection of data for reporting. B. Completes paperwork in a timely fashion. 1. Complete charting/charging by the end of the assigned shift., 2. Review charting for errors before electronically signing., 3. Report any unresolved charting/charging discrepancies to the immediate supervisor for resolution. C. Follow policies and procedures when administering care. D. Report quality issues to management for review. 9. Age Appropriate Care: Provides age-appropriate care to: ____Infant ___ Child X Adolescent _X Adult _X Geriatric Criteria: A. Demonstrates knowledge and skills of normal growth & development necessary to provide services to the age of the patient served by the department. B. Demonstrates ability to assess and interpret age specific data to identify patient needs. C. Utilizes communication skills necessary to interpret age specific responses to service and interaction. D. Involves family or significant other in decision making related to services provided. E. Demonstrates ability to provide service needed for the age groups routinely served by the department assigned. F. Position specific: Able to titrate dosages and applications to fit the needs of the various growth and development stages. Recognizing that each stage requires different considerations and methods. 10. Specialized Care: Provides specialized care to patients at high risk for injury. (1, 2, 4, 5, 8) (include if appropriate) <1% Criteria A. Restraint Care 1. Initiates/evaluates alternatives to restraint prior to application., 2. Applies restraints consistent with the approved procedure., 3. Monitors and assesses patient’s response throughout the restraint period at the appropriate intervals. B. Pain Management (licensed personnel) 1. Assess patient for presence of pain on admission and during assessments/reassessments., 2. Incorporates patient’s cultural/spiritual beliefs regarding pain into pain management plan. 3.Implement pain management techniques. Focus on prevention rather than treatment. 4. Include patient and/or family members in developing a pain management plans., 5. Consider other methods of pain control when developing plan of care: massage, repositioning, immobilization, and music therapy. C. Abuse Assessment 1. Is aware of abuse recognition criteria and incorporates it into assessments., 2. Reports signs of possible abuse/neglect to the physician & Risk Management, and recommends appropriate consultations (psychiatric, Social Work) for evaluation. DISCLAIMER: Performs other related duties as assigned or requested. Rationale for Essential Functions 1. The performance of this function is the reason the job exists., 2. There are limited employees among whom the performance of this function can be distributed., 3. This function occupies a great deal of the employee’s time., 4. This function is highly specialized. Employees are hired for the skill/ability to perform this function., 5. Failure to perform this function may have serious consequences., 6. The function was performed by past employees, and is performed by current employees., 7. Exposure to blood borne pathogens that require the use of protective equipment., 8. Exposure to tuberculosis that requires the use of protective equipment. Work requires the knowledge and skills necessary to provide direct patient care appropriate to patient population of specialty: Job Specifications MINIMUM EDUCATION: Graduate of an AMA approved school Respiratory Therapy preferred. MINIMUM EXPERIENCE: Leadership skills are desirable and should be demonstrated. REQUIRED REGISTRY OR LICENSE: Registered with the N.B.R.C Licensed in the state of Missouri within 6 months of hirerequired. INDEPENDENT ACTION: Must demonstrate the ability to provide high quality therapy skills with moderate supervision and to make independent decisions in critical and non-critical care areas. Individuals must be energetic and motivated to support the success of a growing service. PRESSURE OF WORK: Capable of withstanding long hours of walking and standing. Capable of tolerating the sights and sounds and odors associated with the care of the sick and dying patients. Capable of responding quickly in emergencies. Capable of lifting moderate weights. Capable of handling hazards due to exposure to inflammable and explosive gases. WORKING CONDITIONS: May be exposed to infectious and contagious diseases. Regularly exposed to the risk of blood borne diseases. Exposed to hazardous anesthetic agents, body fluids, and wastes. Subjected to electrical and radiant energy hazards. Exposure to unpleasant patient or unit elements. Contact with patients under a wide variety of circumstances. May be exposed to unpleasant elements (accidents, injuries and illness). Subject to varying and unpredictable situations. May be required to handle emergency or crisis situations. Subjected to irregular hours. Exposed to chemicals such as isopropyl alcohol, Aerosol and cleaning solutions which are used in decontaminating equipment. PROTECTIVE REQUIREMENTS: • Eye protection, • Gowns, • Lab coat, • Mask, • Sterile and non-sterile gloves, • Demonstrate a desire and willingness to provide comfort and aid to patients., • Cooperative and friendly to all personnel., • Present a professional demeanor at all times., • Always consult supervisor/senior tech when confronted with unusual situations., • Period of Adjustment PHYSICAL REQUIREMENTS: • Heavy Physical effort (lift, carry up to 50 lbs.), • Prolonged, extensive, or considerable standing/walking., • Lifts, positions, pushes, and/or transfers patients., • Pushes/pulls or moves/lifts heavy equipment/supplies., • Manual dexterity, mobility, and fine motor skills., • Intermittent exertion when performing therapies., • Considerable reaching, stooping, bending, kneeling, and crouching VISION REQUIREMENTS: Ability to adjust vision for varying degrees of room light. REQUIRED PROFESSIONAL LICENSE AND/OR CERTIFICATIONS State of Work Location: Illinois, Missouri, Oklahoma, Wisconsin • Basic Life Support HealthCare Provider (BLS HCP) - American Heart Association (AHA), • And, • Registered Respiratory Therapist (RRT) - National Board for Respiratory Care (NBRC), • And, • Respiratory Care Practitioner - Missouri Division of Professional Registration Employee___________________________________________Date____________ Supervisor__________________________________________Date_____________ Department Director __________________________________Date _____________ Administration________________________________________Date_____________ The above statements are intended to describe the general nature and level of work being performed. They are not to be construed, as an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. An individual working in their job classification must also perform specific tasks upon request by supervisor personnel. Furthermore, the duties and responsibilities for this job classification are subject to change at the discretion of the medical center. Work Shift: Night Shift (United States of America) Job Type: Employee Department: 4302000037 Respiratory Therapy Scheduled Weekly Hours:36 Benefits: SSM Health values our exceptional employees by offering a comprehensive benefits package to fit their needs. * Paid Parental Leave: we offer eligible team members one week of paid parental leave for newborns or newly adopted children (pro-rated based on FTE). * Flexible Payment Options: our voluntary benefit offered through DailyPay offers eligible hourly team members instant access to their earned, unpaid base pay (fees may apply) before payday. * Upfront Tuition Coverage: we provide upfront tuition coverage through FlexPath Funded for eligible team members. SSM Health is an equal opportunity employer. SSM Health does not discriminate on the basis of race, color, religion, national origin, age, disability, sex, sexual orientation, gender identity, pregnancy, veteran status, or any other characteristic protected by applicable law. ___

It's more than a career, it's a calling MO-SSM Health Saint Louis University Hospital 1201 Grand Worker Type: Regular Job Highlights: Job Summary: The respiratory therapist is a healthcare professional employed to perform all respiratory care diagnostic and therapeutic procedures provided by the Department of Respiratory Care. They should be energetic and motivated to support the success of a growing service. The respiratory therapist should refer to supervisory personnel in any doubtful situation. Job Responsibilities and Requirements: Job Description POSITION ACCOUNTABILITIES AND PERFORMANCE CRITERIA (% of time) The following are essential job accountabilities: 1. Demonstrate ability to relate to coworkers in a professional and respectful manner, in order to assure and promote a culture of safety., 2. Performs all respiratory related therapeutic and diagnostic maneuvers are carried out in accordance with established policies and procedures of the department. This shall include: (50%) Criteria: A. Implements and assess the function of oxygen and therapeutic gas. B. Ensure proper set-up and implementation of therapeutic and diagnostic procedure. C. Provide aerosolized medication. D. Provide CPT and IPV. E. Setup and monitor ventilators in accordance with the department and hospital policies. F. Communicates with peers and staff to develop and improve inter- and intradepartmental services. Meet with appropriate personnel to address and resolve problem issues. G. Performs CPR H. Perform diagnostic procedures including but not limited to: 1. ABG analysis, 2. Pulse Oximetry, 3. Nitric Oxide pulmonary hypertension studies, 4. The licensed respiratory therapist will ensure that each patient’s status is assessed to determine the patient’s care needs and to ensure patient’s needs are reassessed in response to treatment and care provided. Criteria: Assess and reassess patients for therapy which includes but is not limited to: A. Vital signs before and after therapy. B. Breath sounds before and after therapy. C. Checking for physician orders for therapy. D. Pre and post assessment for therapy tolerance and response. E. Oxygen requirements. F. Sputum color, viscosity and quantity. G. Other patient specific observations as needed. 4. Special duties: Ability to interact with physicians and nurses. May work in an intensive care unit area. This may include: (25%) Criteria: A. Responsible to respond to critical areas (e.g. ER, OR, Code). B. Perform routine checks on Life Support Unit. C. Assist with bronchoscopy procedure. D. Assist with minor cardiopulmonary invasive or surgical procedures. E. Perform tracheotomy care. F. Perform bedside studies including: f/vt, shunt studies, ventilator mechanics dead space, compliance, O2 content, and metabolic cart studies. G. Perform bedside pulmonary function procedures. H. Interpretation of complex lab data. I. Provide input in decisions involving patient care on and off life support systems. J. Provide input on patient care via physician consultations. K. Display qualities of an independent thinker through the performance of everyday job duties. L. Assist with the prevention of ventilator associated pneumonia as indicated by the latest evidence based literature. 5. Perform all other aspects of Respiratory Care in accordance with hospital policies and procedures. (5%) Criteria: A. Attends monthly department meetings, specialty meetings, in-services, and any other meetings as required. B. Assure all time and attendance exceptions are properly recorded in the exceptions book. C. Communicates with physicians in regard to therapies ordered and therapeutic goals. The following job accountabilities may be reassigned: 6. Performs other duties as required. (5%) Criteria: A. Cleaning, disinfecting and/or sterilization of all reusable of respiratory and bronchoscopy equipment. B. Routine mechanical maintenance of respiratory equipment. C. Maintain neat and clean work and storage areas. D. Maintain neat and accurate records. E. Answer phone in a professional and timely manner. 7. Safety/Infection Control: Practices according to safety and infection control policies. (1, 2, 3, 4, 5) 5% Criteria A. Practices universal precautions and disposes of hazardous wastes per established guidelines. B. Maintains a safe, clean, comfortable and therapeutic environment for patients/families/employees in accordance with hospital standards. 1. Maintains clutter free environment., 2. Keeps conversations and background noise to a minimum., 3. Adheres to dress code. C. Reports risk management concerns. D. Assumes responsibility for completing all annual mandatory requirements: 1. Safety/Fire, 2. Blood Borne Pathogen, 3. Hazardous Communication, 4. TB, 5. Department Specific, 6. Age Appropriate Care (for clinical staff only), 7. BLS/ALS per recertification guidelines of AHA E. Work in a constant state of alertness and safe manner. 8. Service: Provides service excellence to the customers of Saint Louis University Hospital by delivering timely, high quality care in a courteous, and respectful manner. (1, 2, 3, 4, 5) 10% Criteria: A. Explain therapy to the patient prior to initiation. B. Being courteous to the patient, their family, visitors and co-workers. C. Respects patients’ rights. D. Practice commitment of patient confidentiality. 8. Quality Improvement (QI): Incorporates Quality Assessment into one’s daily work. 5% Criteria: A. Assisting with collection of data for reporting. B. Completes paperwork in a timely fashion. 1. Complete charting/charging by the end of the assigned shift., 2. Review charting for errors before electronically signing., 3. Report any unresolved charting/charging discrepancies to the immediate supervisor for resolution. C. Follow policies and procedures when administering care. D. Report quality issues to management for review. 9. Age Appropriate Care: Provides age-appropriate care to: ____Infant ___ Child X Adolescent _X Adult _X Geriatric Criteria: A. Demonstrates knowledge and skills of normal growth & development necessary to provide services to the age of the patient served by the department. B. Demonstrates ability to assess and interpret age specific data to identify patient needs. C. Utilizes communication skills necessary to interpret age specific responses to service and interaction. D. Involves family or significant other in decision making related to services provided. E. Demonstrates ability to provide service needed for the age groups routinely served by the department assigned. F. Position specific: Able to titrate dosages and applications to fit the needs of the various growth and development stages. Recognizing that each stage requires different considerations and methods. 10. Specialized Care: Provides specialized care to patients at high risk for injury. (1, 2, 4, 5, 8) (include if appropriate) <1% Criteria A. Restraint Care 1. Initiates/evaluates alternatives to restraint prior to application., 2. Applies restraints consistent with the approved procedure., 3. Monitors and assesses patient’s response throughout the restraint period at the appropriate intervals. B. Pain Management (licensed personnel) 1. Assess patient for presence of pain on admission and during assessments/reassessments., 2. Incorporates patient’s cultural/spiritual beliefs regarding pain into pain management plan. 3.Implement pain management techniques. Focus on prevention rather than treatment. 4. Include patient and/or family members in developing a pain management plans., 5. Consider other methods of pain control when developing plan of care: massage, repositioning, immobilization, and music therapy. C. Abuse Assessment 1. Is aware of abuse recognition criteria and incorporates it into assessments., 2. Reports signs of possible abuse/neglect to the physician & Risk Management, and recommends appropriate consultations (psychiatric, Social Work) for evaluation. DISCLAIMER: Performs other related duties as assigned or requested. Rationale for Essential Functions 1. The performance of this function is the reason the job exists., 2. There are limited employees among whom the performance of this function can be distributed., 3. This function occupies a great deal of the employee’s time., 4. This function is highly specialized. Employees are hired for the skill/ability to perform this function., 5. Failure to perform this function may have serious consequences., 6. The function was performed by past employees, and is performed by current employees., 7. Exposure to blood borne pathogens that require the use of protective equipment., 8. Exposure to tuberculosis that requires the use of protective equipment. Work requires the knowledge and skills necessary to provide direct patient care appropriate to patient population of specialty: Job Specifications MINIMUM EDUCATION: Graduate of an AMA approved school Respiratory Therapy preferred. MINIMUM EXPERIENCE: Leadership skills are desirable and should be demonstrated. REQUIRED REGISTRY OR LICENSE: Registered with the N.B.R.C Licensed in the state of Missouri within 6 months of hirerequired. INDEPENDENT ACTION: Must demonstrate the ability to provide high quality therapy skills with moderate supervision and to make independent decisions in critical and non-critical care areas. Individuals must be energetic and motivated to support the success of a growing service. PRESSURE OF WORK: Capable of withstanding long hours of walking and standing. Capable of tolerating the sights and sounds and odors associated with the care of the sick and dying patients. Capable of responding quickly in emergencies. Capable of lifting moderate weights. Capable of handling hazards due to exposure to inflammable and explosive gases. WORKING CONDITIONS: May be exposed to infectious and contagious diseases. Regularly exposed to the risk of blood borne diseases. Exposed to hazardous anesthetic agents, body fluids, and wastes. Subjected to electrical and radiant energy hazards. Exposure to unpleasant patient or unit elements. Contact with patients under a wide variety of circumstances. May be exposed to unpleasant elements (accidents, injuries and illness). Subject to varying and unpredictable situations. May be required to handle emergency or crisis situations. Subjected to irregular hours. Exposed to chemicals such as isopropyl alcohol, Aerosol and cleaning solutions which are used in decontaminating equipment. PROTECTIVE REQUIREMENTS: * Eye protection * Gowns * Lab coat * Mask * Sterile and non-sterile gloves * Lead aprons CONTACT WITH OTHERS: * Demonstrate a desire and willingness to provide comfort and aid to patients. * Cooperative and friendly to all personnel. * Present a professional demeanor at all times. * Always consult supervisor/senior tech when confronted with unusual situations. * Period of Adjustment * As per hospital probationary period. EQUIPMENT KNOWLEDGE: Must be familiar with equipment used for therapy and diagnostic procedures. PHYSICAL REQUIREMENTS: * Heavy Physical effort (lift, carry up to 50 lbs.) * Prolonged, extensive, or considerable standing/walking. * Lifts, positions, pushes, and/or transfers patients. * Pushes/pulls or moves/lifts heavy equipment/supplies. * Manual dexterity, mobility, and fine motor skills. * Intermittent exertion when performing therapies. * Considerable reaching, stooping, bending, kneeling, and crouching * VISION REQUIREMENTS: Ability to adjust vision for varying degrees of room light. REQUIRED PROFESSIONAL LICENSE AND/OR CERTIFICATIONS State of Work Location: Illinois, Missouri, Oklahoma, Wisconsin * Basic Life Support HealthCare Provider (BLS HCP) - American Heart Association (AHA) * And * Registered Respiratory Therapist (RRT) - National Board for Respiratory Care (NBRC) * And * Respiratory Care Practitioner - Missouri Division of Professional Registration Employee___________________________________________Date____________ Supervisor__________________________________________Date_____________ Department Director __________________________________Date _____________ Administration________________________________________Date_____________ The above statements are intended to describe the general nature and level of work being performed. They are not to be construed, as an exhaustive list of all duties, responsibilities, and skills required of personnel so classified. An individual working in their job classification must also perform specific tasks upon request by supervisor personnel. Furthermore, the duties and responsibilities for this job classification are subject to change at the discretion of the medical center. Work Shift: Night Shift (United States of America) Job Type: Employee Department: 4302000037 Respiratory Therapy Scheduled Weekly Hours:36 Benefits: SSM Health values our exceptional employees by offering a comprehensive benefits package to fit their needs. * Paid Parental Leave: we offer eligible team members one week of paid parental leave for newborns or newly adopted children (pro-rated based on FTE). * Flexible Payment Options: our voluntary benefit offered through DailyPay offers eligible hourly team members instant access to their earned, unpaid base pay (fees may apply) before payday. * Upfront Tuition Coverage: we provide upfront tuition coverage through FlexPath Funded for eligible team members. SSM Health is an equal opportunity employer. SSM Health does not discriminate on the basis of race, color, religion, national origin, age, disability, sex, sexual orientation, gender identity, pregnancy, veteran status, or any other characteristic protected by applicable law. ___

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

6052 - Mid Rivers Mall - 4990 N Service Rd, St. Peters, Missouri, 63376 CarMax, the way your career should be! Now offering up to a $5,000 sign-on bonus Only candidates external to CarMax who are hired will qualify to receive the sign on bonus. CarMax is now hiring Automotive Technicians! Start loving what you do at CarMax Ensure every vehicle is one our customers can rely on At CarMax, our Automotive Technicians repair and recondition cars to meet CarMax’s high standards. Automotive Technicians use their skills to diagnose, fix and prepare vehicles for our customers. From repairing engines to adjusting steering and suspension and checking brakes, our Automotive Technicians bring out the best in every vehicle. And we’ll help bring out the best in you too, being part of a skilled team, with a clean, modern, climate-controlled environment and production facilities for top-notch reconditioning. You will also enjoy a generous range of company benefits including: • Paid time off, • Medical / dental coverage, • 401k with company match, • Vehicle discount, • Tuition reimbursement, • and more! What you will do – Essential responsibilities • Automotive Technicians diagnose, recondition and repair vehicles to ensure CarMax customers can drive away feeling safe and at ease, • Work as part of a team to solve technical problems quickly and effectively, • Build experience as an automotive mechanic across a wide range of domestic and foreign vehicles CarMax Automotive Technicians work in a fast-paced environment where motivation is key. Working together with other Automotive Technicians you will solve problems, meet deadlines, and deliver great results. CarMax wants you to produce your best work, so we support our associates by providing the equipment you need to get the job done and the feedback that helps you get better every day. We also promote your interest in learning and development by supporting you with training to acquire new skillsets and accreditations. Qualifications and requirements • Experience in one or more of the following: engine repair, steering and suspension, brakes, heating and air conditioning, • Knowledge of health and safety compliance, • Manual dexterity and physical stamina, lift heavy objects, and walk and stand for extended periods of time, • Manage multiple tasks in a fast-paced environment, • Good communication skills and attention to detail, • Possession of a valid driver’s license, • Where required by State/Local law, maintain ASE Certifications* About CarMax CarMax disrupted the auto industry by delivering the honest, transparent and high-integrity experience customers want and deserve. This innovative thinking around the way cars are bought and sold has helped us become the nation’s largest retailer of used cars, with over 200 locations nationwide. Our amazing team of more than 25,000 associates work together to deliver iconic customer experiences. Along the way, we help every associate grow their career and achieve their best, at work and in their community. We are recognized for our commitment to training and diversity and are one of the FORTUNE 100 Best Companies to Work For®. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

Overview: William Charles Construction is now hiring for a Quality Control Manager in New Albany, IN! The QC Manager ensure that all construction activities comply with project specifications, industry standards and regulatory requirements. This role is critical for maintaining quality assurance throughout heavy civil construction projects, including earthwork, concrete, utilities and structural components. Company Overview With more than a century of exceptional work on our resume, William Charles Construction remains guided by the pursuit of excellence. Our “Do it Right the First Time” work ethic has been the cornerstone of our business philosophy since 1892. With our broad background in heavy civil construction, environmental management and mining and materials production, we have the expertise to help our customers complete their most complex projects. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Join one of the largest construction firms in the country (Engineering News-Record [ENR]: #1 in Power, #17 Top 50 Domestic Heavy Contractors, #20 Transportation Contractor). Responsibilities: Develop and Implement Quality Plans • Create and maintain a project-specific Quality Management Plan (QMP) outlining standards, procedures and protocols., • Maintain thorough records of inspections, findings and corrective actions., • Prepare and present reports on quality metrics and progress to senior management., • Identify quality issues, perform root cause analysis and work with the project team to implement effective corrective actions., • Work closely with project managers, engineers, subcontractors and other stakeholders to maintain high-quality standards throughout the project., • Assist in training site personnel on quality control policies, procedures and best practices. Qualifications: • Associate or Bachelor’s degree in construction management, • 5 years of experience in quality control or inspection within heavy civil construction (roads, bridges, utilities, earthwork). Design-Build experience preferred., • Strong knowledge of construction materials, methods and testing procedures., • Proficient in reading and interpreting plans and specifications., • ACI Concrete Field Testing Technician, • OSHA 30 Hour Certification., • Ability to work outdoors in varying weather conditions., • Frequent walking, standing and lifting up to 50 lbs. What's in it for You Financial Wellbeing • Competitive pay with ongoing performance review and merit increase, • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Diabetes Management, Telehealth Coverage, Prescription Drug Plan, Pet Insurance, Weight Management Drug Discount Discounted National Gym Membership Network Family & Lifestyle • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-Onsite #LI-WA1 Appcast (For Export): #appflash

Job Overview: Are you ready to take your electrical expertise to the next level in a fast-paced, hands-on environment? Join Marvin as a Journeyman Electrician and be part of a team where your skills make a direct impact every day. You’ll work both independently and collaboratively, solving problems creatively and communicating clearly to support our operations. This role offers variety, challenge and the opportunity to grow your trade skills while contributing to a high-performing team. This job is located in Warroad, MN. If you're considering relocating to Warroad, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more – in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: • Perform electrical work safely and efficiently, maintaining clean and organized workspaces., • Troubleshoot and repair facility electrical systems, including working in tight spaces and elevated platforms., • Accurately document work order hours, equipment history, and inventory usage., • Interpret equipment manuals and drawings to support maintenance and communicate effectively with internal and external partners. You're a good fit if you have (or if you can):, • A current Minnesota Journeyman’s Electrical License., • Prior experience performing electrical work in a facility or industrial setting., • Ability to read and interpret technical drawings and manuals. Also want to make sure you have:, • Experience using aerial lifts, ladders, and hand tools safely and effectively., • Flexibility to shift between tasks and departments as needed., • Ability to train others and contribute to a culture of continuous improvement. Core Hours: Monday–Thursday, 5:00 a.m. – 3:30 p.m., with occasional overtime and weekend project work. We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities #LI-AS2 Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at ___. Compensation: $30.00 - $43.50 per hour

Job Overview: Are you looking for steady work, a high-energy team and a company that values you and your time? This opportunity is sure to spark your interest! We're looking for a Master Electrician to join us at Marvin. Your typical day will include supporting the Marvin facilities, systems, and equipment including preventive maintenance, consulting on new and existing equipment and facilities, electrical (Intertek/UL) and building code requirements and supporting issues as they arise. You'll get to manage projects while still getting hands-on experience using your skills. This role works Monday through Friday with some after-hours & weekend on-call when necessary. Enjoy working in a clean, safe, temperature-controlled facility with great teams. We provide everything you need to be successful from hands-on training to your tools. We also offer full benefits starting Day 1 and ample paid time off. Besides the perks, we offer an encouraging team environment here at Marvin. This job is located in Warroad, MN. If you're considering relocating to Warroad, you may be eligible for a relocation benefit package to assist with your move. Marvin offers an extensive relocation benefit package that includes the movement of your household goods, temporary housing, and much more – in addition to a relocation counselor to assist you throughout the entire journey. Highlights of your role: • Must demonstrate safe work habits and maintain good housekeeping at all times., • Must have an understanding of facility electrical systems., • Display consistent improvement and accuracy in the performance of electrical trade skills., • Working in tight spaces and in awkward positions to run wiring and remove old wiring., • Working at elevations on ladders and aerial lift platforms., • Must be detail oriented and able to read prints/drawings, • Must be able to accurately book hours toward work orders. Enter history comments, look up history on equipment. Locate parts in inventory, enter work orders, and request parts., • Able to understand equipment manuals including proper maintenance, troubleshooting, BOM's, etc., • Effectively communicate customer needs to maintenance, support departments and external customers in a positive manner. Also, able to contact appropriate support resources with questions for assistance., • Must be able to select the proper equipment or tool(s) for the job at hand, • Must be able/willing to attend, learn, and train fellow employees as time and tasks warrant., • Must be able to trouble shoot problems and provide alternative solutions when necessary., • Must flexible and willing to move from job task to job task without hesitation, • Willingness to learn and work in other trade skill areas as needed, • Willingness to be cross trained in multiple departments and job roles. You're a good fit if you have (or if you can):, • Strong mechanical, electrical and programming aptitude and skills, • The ability to read and understand schematics/prints to complete electrical work, • The ability to work well independently with a focus to get things done right, • Excellent troubleshooting skills and the ability to understand facility and production equipment electrical systems., • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm – Drive for results., • Communication and collaboration skills, ability to work cross-functionally Also want to make sure you have: Must possess a current MN Journey Workers or Master Electrical License * Prior experience in electrical work required We invite you to See Yourself at Marvin: From people to products, Marvin is committed to creating better ways of living. When you join this family-owned and -led window and door company, you belong to a community full of opportunities. For more than a century, we’ve been at the forefront of designing, building, and engineering premium, award-winning products. Today, Marvin is also proud to have been named a Top Large Employer by Forbes Magazine two years in a row, in 2024 and 2025. With operations in 19 cities across North America, we manufacture Marvin’s quality products, including Infinity Replacement Windows and Doors, and TruStile Doors. Together, we uphold our values and foster a culture where safety and the wellbeing of our people comes first. We take a better living approach with benefits to support you at work and beyond. From day one, you will enjoy health insurance, paid holidays, paid parental leave, a 401(k) retirement savings match and more! Some of our unique and most popular benefits include: • $300 annual wellbeing account to spend on what helps you feel happy + healthy, • Better Living Day! (a paid day off to go have some fun), • Annual profit sharing – recognizing everyone’s contribution to Marvin’s success, • Giving at Marvin – participate in organized volunteer opportunities #LI-AS2 Marvin is an Equal Opportunity Employer: Marvin is committed to creating an inclusive environment for all employees and applicants. Employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status under applicable laws. Applicants requiring reasonable accommodation for any part of the application and hiring process may contact us at ___. Compensation: $36 - $47.50 per hour

Stability Healthcare is seeking a travel nurse RN Cardiac Cath Lab for a travel nursing job in Saint Louis,, Missouri. Job Description & Requirements • Specialty: Cardiac Cath Lab, • Discipline: RN, • Start Date: 06/01/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days *$600 travel bonus *Day 1 health insurance with United Healthcare *PTO plan -- start accruing on day 1, use during contract or cash out at the end! *Guaranteed stipend if facility calls you off *Extra hour bonus -- earn an additional hourly bonus for working over your weekly contracted hours Stability Job ID #838677. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: EP About Stability Healthcare \nStability Healthcare was founded in 2009, with the mission of becoming the best Travel Nursing Agency in California. We have been rated one of the top travel nursing agencies and offer our nurses the highest paying travel nursing jobs available. We have access to the best travel assignments from 1000’s of facilities.\n \n \nYou can start the year off in sunny California, spend the Spring in the Colorado Rockies, enjoy the Summer in the Mid-West, experience the change of seasons in Boston and New York, and hit the beaches of Florida in the winter. Our Nurses work in the best hospitals and health systems in the country.\n Benefits • Guaranteed Hours, • Benefits start day 1

Job Description: Position Details: • Hourly pay up to $33.50 per hour, based on experience, • Monday - Thursday, 10pm-6:30am, • Sign On Bonus up to $10,000 (Terms Apply), $1000 Annual Tool Allowance, Annual Safety Boot Allowance and Benefits Day 1 of Employment!We Deliver the Goods:, • Competitive pay and benefits, including Day 1 Health & Wellness Benefits, Employee Stock Purchase Plan, 401K Employer Matching, Education Assistance, Paid Time Off, and much more, • Growth opportunities performing essential work to support America’s food distribution system Primary Responsibilities: • Complete and perform preventative maintenance on minor repairs and standard component inspections/ repairs of fleet diesel equipment (tractors, trailers, refrigeration units) as well as, identifying root cause of basic failures/conditions and perform repairs as required, • Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition which may require replacement of parts, • Ensure equipment has required licensing and registration prior to being deemed as “roadworthy”, • Complete thorough documentation for work orders of repairs and preventative maintenance through the online Enterprise Asset Management system, • Install, replace, and repair onboard computers, • Use hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists, • Perform routine maintenance such as changing oil, checking batteries and lubricating equipment and machinery requiring the use of hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, welding equipment, and jacks and hoists, • Train other employees Required Experience: 5 - 7 Years 5+ years of proven medium to heavy-duty vehicle repair including PM's, tire & wheel, air & air disc brakes, diagnosis, computerized diagnostics, electrical troubleshooting, electronic component repair and a minimum of 2 years’ experience in A/C refrigeration. Company description Performance Foodservice, PFG’s broadline distributor, maintains a unique relationship with a variety of local customers, including independent restaurants and hotels, healthcare facilities, schools, and quick-service eateries. A team of sales reps, chefs, consultants, and other experts builds close relationships with customers — providing advice on improving operations, menu development, product selection, and operational strategies. The Performance team delivers delicious food but also goes above and beyond to help independent restaurant owners achieve their dreams. Awards and Accolades Performance Food Group and/or its subsidiaries (individually or collectively, the "Company") provides equal employment opportunity (EEO) to all applicants and employees, regardless of race, color, national origin, sex, marital status, pregnancy, sexual orientation, gender identity, religion, age, disability, genetic information, veteran status, and any other characteristic protected by applicable local, state and federal laws and regulations. Please click on the following links to review: (1) our EEO Policy; (2) the "EEO is the Law" poster and supplement; and (3) the Pay Transparency Policy Statement.

Care Career is seeking a travel nurse RN Cardiac Cath Lab for a travel nursing job in Saint Louis, Missouri. Job Description & Requirements • Specialty: Cardiac Cath Lab, • Discipline: RN, • Start Date: 06/01/2026, • Duration: 13 weeks, • 40 hours per week, • Shift: 10 hours, days Care Career Job ID #36607953. Pay package is based on 10 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: RN Electrophysiology (EP) Lab About Care Career Care Career brings together a portfolio of leading healthcare staffing organizations, each delivering specialized talent solutions across the industry. Wherever you want to go, We Make It Happen. With travel nursing jobs across the country, you can discover the possibilities that create the lifestyle and financial position that you have dreamed of. Care Career is a modern, transparent staffing firm creating the ultimate community of US. Benefits • Referral bonus, • Weekly pay, • Medical benefits, • Continuing Education, • Dental benefits, • Vision benefits

Additional InformationDay Shift, Evening Shift Preferred Job Number26048407 Job CategoryEngineering & Facilities LocationMarriott St. Louis Grand, 800 Washington Ave, Saint Louis, Missouri, United States, 63101 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $22.00-$22.00 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Driver’s License At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Additional InformationDay Shift, Evening Shift Preferred Job Number26048407 Job CategoryEngineering & Facilities LocationMarriott St. Louis Grand, 800 Washington Ave, Saint Louis, Missouri, United States, 63101 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management Pay Range: $22.00-$22.00 per hour POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Driver’s License At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job DescriptionSkilled Trailer Technician Position: Skilled Trailer TechnicianLocation: St Louis, MO Pay Range: $20.00 to $35.00 depending on skill setJob Type: Full-TimeCompany: CSTK Inc. is an award-winning Authorized Thermo King dealership group providing a complete line of refrigerated transportation products, including parts, service, aftermarket accessories, trailer repair, and technology solutions. In addition, we also provide sales, parts, and service for the top construction equipment brands, horse and livestock trailers, and heavy-duty truck outfitting in our region. What you will be doing: You will be responsible for diagnosing and repairing duty trailers with minimal supervision; including preventative maintenance, inspections and repairs, air and hydraulic brake repairs, suspension and electrical systems troubleshooting.Requirements to Apply: • High School Diploma or equivalent, • A minimum of 5 years' experience as a trailer technician., • Years of trailer repair experience, • Technical knowledge of major trailer systems and related equipment, • Must supply own tools, • Must be able to work overtime, • Ability to work with diagnostic computers for troubleshooting and repairs, • Ability to effectively communicate with customers and team members, • Ability to work in a fast-paced environment, • Attention to detail, • Ability to regularly required to stand, walk, climb, stoop, kneel, crouch, reach with hands and arms, and use hands to finger, handle or free objects., • Use computers for web-based training and work order system, • Dependable and reliable, • Ability to safely operate a forklift, • Ability to retain knowledge of standard operating procedures and follow verbal and written instructions, • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company's insurance carrier., • Must be able to pass a DOT approved physicalWe offer:, • Quarterly Shop Incentive Bonus, • Competitive Wage Compensation, • A Great Working Environment, • Health, Dental & Vision Insurance, • Retirement Plan + Employer 401(k) Match, • Employer Paid Basic Life and Short-Term Disability EEO/D/V PM20 Compensation details: 20-35 Hourly Wage PI9e96eaebbf23-25405-40074160

Job Description As a Light-Wheel Vehicle Mechanic for the Army National Guard you’ll ensure that anything that moves on wheels is ready to hit the road. In this role, you will primarily be responsible for supervising and performing maintenance and recovery operations on wheeled vehicles in the field and in the shop. Your duties will include inspecting, servicing, maintaining, repairing, testing, adjusting, and replacing of systems and components; performing recovery operations, and servicing electrical systems; including wiring harness and charging systems. Job Duties • Maintain wheeled vehicles associated trailers and material handling equipment systems, • Service automotive electrical systems, including wiring harness, and starting and charging systems Helpful Skills • Interest in troubleshooting and repairing mechanical problems, • Interest in automotive engines and how they work Through your training, you will develop the skills and experience to enjoy a civilian career with service stations, auto dealers, farm equipment companies, and state highway agencies. You’ll be able to pursue a career as a mechanic who works on carburetors, transmissions, radiators, construction equipment, or endless track vehicles. Earn While You Learn Instead of paying to learn these skills, get paid to train. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training requires 10 weeks of Basic Training, where you'll learn basic Soldiering skills, and 13 weeks of Advanced Individual Training (AIT). Part of this time is spent in the classroom and part in the field. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Position Responsibilities: Overall subject matter expert and technical lead engineer for the Mission and Safety Computers hardware for requirements development, avionics subsystem and system design, integration, subsystem/system/flight test, system verification, production/fielding, and supplier oversight Lead the hardware supplier design team in supporting all Tactical Fighters program needs Develop interface control documents describing mechanical, electrical, and software interfaces Perform technical problem investigation and resolution at subsystem, system, and platform integration levels Perform weapon capability development, implementation, and integration onto a fighter’s platform Out brief status to internal Boeing stakeholders/leadership and external customers Support subsystem testing on the Mission Systems Hardware Support system testing in ESIL and during Flight Test Support Safety Critical Functional Thread Analysis efforts for the Mission Systems Hardware Support airworthiness efforts for hardware design, development and implementation Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Level 4 : 9+ years of work-related experience with a Bachelor’s degree OR 7+ years of work-related experience with a Masters OR 3+ years of work-related experience with a PhD Preferred Qualifications (Desired Skills and Experience): Knowledge of Core Processing, Image/Display/Video Processing, Built-In Test Requirements, and Safety Computing Knowledge of Circuit Card Assembly design, fabrication, and verification Knowledge of avionics box interfaces – MIL-STD-1553, Serial buses, RS-170/RS-422/RS-232, hardware discrete, fiber/ethernet Knowledge of avionics quality inspection and acceptance processes Knowledge of Software Requirements, Software Environments, and Platform Operational Flight Program development Experience working closely with United States Government and aircrew Tools/application familiarity – DOORS, MSOSA/Cameo, Teamcenter, MS Office & Project, etc. Knowledge of Military Standards/Handbook implementations – MIL-STD-810, MIL-STD-704, MIL-STD-461, etc. Experience with electrical schematics, wiring diagrams, functional diagrams Experience mentoring, coaching and leading technical projects and team This position is expected to be 100% onsite. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Shift: This position is for 1st Shift Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Potential signing bonus for eligible/qualified external candidates Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850-$185,150 Applications for this position will be accepted until May. 11, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking an experienced Engineer to join the Signature Integrity Team in St. Louis, Missouri as a Supportable Low Observable (SLO) Lead Engineer . This role is critical for the development of tools and processes required to sustain stealth platform signature performance on advanced Air Dominance platforms. The successful candidate will provide technical leadership to a team of SLO engineers, ensuring the effective execution of SLO plans while maximizing operational availability and minimizing life cycle costs. Key Responsibilities: Lead the SLO team in maximizing operational availability and minimizing life cycle costs of Boeing products with low observable design features Analyze customer and system requirements to develop architectural approaches and detailed specifications for various products Develop high-level and detailed designs consistent with requirements and specifications Validate designs through various methods of review, testing, and analysis Implement supportability guidelines early in platform design Share SLO experience and methods across low observable programs Identify improvements in designs, materials, tools, or methods to reduce life cycle costs for users Mature data collection and analysis tools to efficiently direct low observable maintenance actions Collaborate with materials & processes, product support, and reliability & maintainability engineers Manage multiple projects simultaneously, demonstrating strong organizational and documentation skills Prepare technical specifications, procedures, and reports Communicate results and status to project stakeholders, including government and suppliers Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 9+ years of experience working with Low Observable (LO) Engineering Processes Active U.S. Top Secret Security Clearance Ability to obtain Special Program Access (U.S. Only Citizenship Required) Preferred Qualifications (Desired Skills and Experience): 9+ years of experience in reliability and maintainability, product support, or materials & processes engineering Strong analytical skills with the ability to develop innovative solutions to engineering challenges Proven track record of leading engineering teams and managing complex projects Excellent communication and interpersonal skills, with the ability to effectively collaborate with cross-functional teams Familiarity with data visualization tools and techniques for effective communication of results Experience in technical writing and documentation for engineering specifications and reports Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Signing Bonus: Potential signing bonus for eligible/qualified external candidates Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 4: $136,850 - $185,150 Level 5: $164,900 - $223,100 Applications for this position will be accepted until May. 26, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active). This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionDescription:The Gund Company has an immediate opening for a full time Technical Manufacturing Customer Service Representative to join our team! Shift: Monday to Friday 8:00am to 4:30pm Wage: $25+, depending on experience Location: St. Louis, MO About The Gund Company The Gund Company, a leader in engineered material solutions, specializes in customized electrical insulation products, with 12 global facilities, we pride ourselves on delivering high-quality products and excellent customer service. We are currently seeking a Manufacturing Customer Service Representative to join our team. Job Summary Technical Manufacturing Customer Service Representative As Technical Manufacturing Customer Service Representative, you are responsible for managing the full order fulfillment process to ensure complete customer satisfaction. This includes processing orders, handling customer inquiries, and working with internal teams to meet customer needs. As a CSR Order Fulfillment Coordinator, this role requires strong communication skills, attention to detail, and the ability to work independently with minimal supervision. Job Responsibilities Technical Manufacturing Customer Service Representative • Implement and manage the Order Fulfillment Process with precision and efficiency in an extremely responsive manner for the customer., • Navigate through ERP-CRM software and database systems to enter quotes and customer orders as well as maintain and update software with customer notations (SSC-Sales, Service, Calls)., • Accurately respond to customer inquiries and quote requests in an expeditious and complete manner., • Build relationships with TGC’s customer base to fully understand the customer's requirements, communicate them to our production and sales team., • Manage customer inventory requirement through use of Purchase Requisition Process., • Other duties as assigned.Requirements:, • High school graduate reading, communication, math and problem-solving skills, • 2+ years customer service experience., • Previous experience in manufacturing environment, • College degree in business or equivalent with formal training preferred, • Familiarity with reading and interpreting technical drawings, • Paid Time Off (PTO), Paid holidays, and a comprehensive benefits package (Health, Dental, Vision, Life, Disability), • 401K plan with a 50% employer match and Employee Stock Ownership plan (ESOP) Apply today to start your career with The Gund Company. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions of the position. EEO Statement: It is the policy of The Gund Company to recruit, hire, train, and promote employees without discrimination. Compensation details: 24-24 Hourly Wage PI82a47d33b03a-25405-40300400

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a highly skilled and experienced Low Observables Mission Systems Integration Engineer to support an integrated product team in the design and integration of an advanced sensor for a next generation platform. The ideal candidate will have a strong background in low observable technologies and systems integration, with a focus on antennas, apertures, and radomes. This role requires technical leadership and collaboration across various engineering disciplines to ensure the successful integration of low observable sensors. Key Responsibilities: Lead the integration of a low observable sensor, ensuring compliance with design and performance requirements Collaborate with a cross-functional team to develop and implement integration strategies for a critical platform sensor Utilize computational electromagnetic solvers to analyze and optimize low observable designs Provide technical leadership and mentorship to engineering teams, fostering a culture of innovation and excellence Oversee the design and integration of low observable sensors, ensuring alignment with program objectives and timelines Stay current with advancements in low observable materials and technologies, applying this knowledge to enhance system performance Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Knowledge of Basic Electromagnetic Principles: Strong understanding of electromagnetic theory and its application in low observable systems Experience with Low Observable Integration: Proven experience in the integration of antennas and apertures in low observable platforms Computational Electromagnetic Solvers: Proficiency in using computational tools for electromagnetic analysis and design Antenna Design and Integration: In-depth knowledge of antenna design principles and integration techniques Low Observable Platforms: Experience in the design and integration of low observable platforms, including familiarity with relevant materials and technologies Preferred Qualifications (Desired Skills and Experience): Master’s degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field Strong problem-solving skills and the ability to work under pressure Excellent communication and interpersonal skills Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Signing Bonus: Potential signing bonus for eligible/qualified external candidates Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $112,200 - $151,800 Applications for this position will be accepted until May. 26, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a highly skilled and experienced Low Observables Mission Systems Integration Lead to lead a team of engineers in support of the design and integration of an advanced next generation platform. The ideal candidate will have a strong background in low observable technologies and systems integration, with a focus on antennas and apertures. This role requires technical leadership and collaboration across various engineering disciplines to ensure the successful integration of low observable systems into advanced platforms. Key Responsibilities: Lead the integration of low observable mission systems, ensuring compliance with design and performance requirements Collaborate with cross-functional teams to develop and implement integration strategies for antennas and apertures Utilize computational electromagnetic solvers to analyze and optimize low observable designs Provide technical leadership and mentorship to engineering teams, fostering a culture of innovation and excellence Oversee the design and integration of low observable platforms, ensuring alignment with program objectives and timelines Stay current with advancements in low observable materials and technologies, applying this knowledge to enhance system performance Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Knowledge of Basic Electromagnetic Principles: Strong understanding of electromagnetic theory and its application in low observable systems Experience with Low Observable Integration: Proven experience in the integration of antennas and apertures in low observable platforms Computational Electromagnetic Solvers: Proficiency in using computational tools for electromagnetic analysis and design Technical Team Leadership: Demonstrated ability to lead and mentor technical teams in a collaborative environment Antenna Design and Integration: In-depth knowledge of antenna design principles and integration techniques Low Observable Platforms: Experience in the design and integration of low observable platforms, including familiarity with relevant materials and technologies Active U.S. Top Secret Security Clearance Ability to obtain Special Program Access (U.S. Only Citizenship Required) Preferred Qualifications (Desired Skills and Experience): Master’s degree in Electrical Engineering, Aerospace Engineering, Physics, or a related field Strong problem-solving skills and the ability to work under pressure Excellent communication and interpersonal skills Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Signing Bonus: Potential signing bonus for eligible/qualified external candidates Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850 - $185,150 Applications for this position will be accepted until May. 26, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active). This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) is seeking a Lead Model-Based Systems Engineer (Level 4) to support an Air Dominance Fixed Wing Proprietary Program in St. Louis, MO . Step into a fast-paced, cutting-edge program where your expertise will drive the design, integration, and testing of advanced, cloud-based systems that empower mission planning, debrief, and tactical Command & Control (C2) solutions for fixed-wing platforms. As a key contributor, you will lead the development, analysis, integration, and testing of innovative engineering solutions for critical Ground System capabilities and ensure seamless support for ground systems from initial design through to final delivery. You will work with a high-performing, cross-functional team in an agile environment, driving next-generation capabilities from design through delivery. This role offers the chance to innovate with open-architecture, model-based designs and collaborate across disciplines to support critical defense missions. If you’re passionate about advancing mission-critical systems and thrive in a collaborative, fast-moving environment, this is your opportunity to make a significant impact. Position Responsibilities Work with customers to develop and document complex electronic and electrical system requirements for Ground Systems Analyze and translate requirements into system, hardware and software designs and interface specifications Utilize Model Based Systems Engineering (MBSE) tools to document designs and provide traceability to project requirements Test and validate to ensure system designs meet operational and functional requirements Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle Research specific technology advances for potential application to company business needs Travel may be required up to 10% of the time; Domestically depending on business needs. This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications (Required Skills/Experience) Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 7+ years related work experience or an equivalent combination of technical education and experience Experience with Model-Based Systems Engineering (MBSE) tools such as CAMEO or similar Systems Modeling Language (SysML)-compatible tool for systems architecture and model development 3+ years of experience/domain knowledge of system architecture, requirements, interface definition, verification, and validation Preferred Qualifications (Desired Skills/Experience) Breadth of experience across technical domains and life cycle phases Experience working on proprietary programs Experience with Mission Systems architectures and Open Missions Systems (OMS) and/or Universal Command and Control Interface (UCI) Experience with military aircraft Experience with Ground Systems or Training Systems for military platforms Experience in developing Digital Engineering Environments Conflict of Interest Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850 – $185,150 Applications for this position will be accepted until May. 07, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is looking for an Associate Test and Inspection Embedded Software Engineer to support our Non-Destructive Inspection (NDI) and avionics Automated Test Equipment (ATE) Software Engineering teams located in Hazelwood, Missouri . This software role supports our commercial and military platforms. The specific role includes developing, integrating, bug resolution, and testing C++/C# software for controlling NDI equipment and/or ATE electrical equipment, updating User Interfaces (UI's), and development of functional and unit tests for the software. The NDI equipment controlled by software includes robotics, LIDAR, ultrasound, and electrical test equipment. The ATE equipment controlled by software includes but not limited to digital, analog, Radio Frequency (RF) - Wifi and Cellular, communication busses, power, and display test equipment. The ATE role includes supporting updates to the test executive/sequence software. The candidates will also be responsible for maintenance and setup of our DevSecOps Continuous Integration/Continuous Deployment (CI/CD) pipelines and Windows runners in GitLab. The general role of an Embedded SW engineer includes: Designs, develops, tests, debugs and maintains software that is integrated into embedded devices and systems and meets industry, customer, safety and regulation standards. Reviews, analyzes, and translates customer requirements into the design of software products for embedded devices and systems. Builds and writes code for embedded systems software to run on specific specialized hardware. Integrates embedded software with hardware components. Analyzes, monitors and improves the efficiency and stability of embedded software systems. Tests and debugs software for embedded devices and systems. Implements current and emerging technologies, tools, frameworks, and changes in regulations relevant to software development and hardware technologies. Advises on software and hardware integration domains. Tracks and evaluates internal and supplier software team performance to ensure product and process compliance to project plans and industry standards. Performs embedded software project management functions. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Position Responsibilities: Supports the design, development, test, debugging and maintenance of software that is integrated into ATE and NDI devices and systems and meets industry, customer, safety and regulation standards Assists with review, analysis, and translation of customer requirements into the design of software products for embedded devices and systems Supports building and writing code for embedded systems software to run on specific specialized hardware Contributes to integration of embedded software with hardware components Supports analysis, monitoring and improving the efficiency and stability of embedded software systems Participates in testing and debugging software for embedded devices and systems Supports implementation of current and emerging technologies, tools, frameworks, and changes in regulations relevant to software development and hardware technologies Supports tracking and evaluation of internal and supplier software team performance to ensure product and process compliance to project plans and industry standards Assists with performing embedded software project management functions Communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables Basic Qualifications (Required Skills/ Experience): Bachelor Degree Ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship 2+ years of experience programming in C, C++ or C# 2+ years of experience in embedded software development Preferred Qualifications (Desired Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 2+ years of related work experience OR Bachelor’s Degree and 6+ years of directly related work experience OR 10+ years of related, relevant experience 2+ years of experience developing automation testing & maintaining automation tools 2+ years of experience with automation and robotic applications development 2+ years of experience with development or real-time software or integration of embedded software onto hardware 2+ years of experience with lab or test equipment, robotics, and/or inspection (i.e. Lidar/Ultrasound) hardware 1+ years of working knowledge of GitLab 1+ years of experience interpreting electrical engineering drawings, schematics, and definition Ability to build, integrate and troubleshoot software components Knowledge of various engineering disciplines such as electrical, mechanical, and/or systems Knowledge of programming languages (e.g., C++, C#, C, Assembly, Ladder Logic, Numerical Control (NC) Programming, Matlab) Knowledge of communications, networking, and protocols (e.g., Transport Control Protocol/Internet Protocol (TCP/IP), File Transfer Protocol (FTP), Extensible Mark-up Language (XML), Wireless Access Protocol (WAP), and/or ARINC429 or MS1553 Knowledge of general and real-time software development and testing tools, including the capability and usage of real-time tools such as test instrumentation, robotics systems, and inspection systems Knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle Travel: Less than 10% CodeVue Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Associate (Level 2): $99,450 - $134,550 Potential signing bonus for eligible/qualified external candidates. Applications for this position will be accepted until May. 08, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is looking for a Test and Inspection Embedded Software Engineer (Experienced or Senior) to support our Non-Destructive Inspection (NDI) and avionics Automated Test Equipment (ATE) Software Engineering teams located in Hazelwood, MO . This software role supports our commercial and military platforms. The specific role includes developing, integrating, bug resolution, and testing C++/C# software for controlling NDI equipment and/or ATE electrical equipment, updating User Interfaces (UI's), and development of functional and unit tests for the software. The NDI equipment controlled by software includes robotics, LIDAR, ultrasound, and electrical test equipment. The ATE equipment controlled by software includes but not limited to digital, analog, Radio Frequency (RF) - Wifi and Cellular, communication busses, power, and display test equipment. The ATE role includes supporting updates to the test executive/sequence software. The candidates will also be responsible for maintenance and setup of our DevSecOps Continuous Integration/Continuous Deployment (CI/CD) pipelines and Windows runners in GitLab. The general role of an Embedded SW engineer includes: Designs, develops, tests, debugs and maintains software that is integrated into embedded devices and systems and meets industry, customer, safety and regulation standards. Reviews, analyzes, and translates customer requirements into the design of software products for embedded devices and systems. Builds and writes code for embedded systems software to run on specific specialized hardware. Integrates embedded software with hardware components. Analyzes, monitors and improves the efficiency and stability of embedded software systems. Tests and debugs software for embedded devices and systems. Implements current and emerging technologies, tools, frameworks, and changes in regulations relevant to software development and hardware technologies. Advises on software and hardware integration domains. Tracks and evaluates internal and supplier software team performance to ensure product and process compliance to project plans and industry standards. Performs embedded software project management functions. Our teams are currently hiring for a broad range of experience levels including Experienced or Senior Engineers. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. Position Responsibilities: Supports the design, development, test, debugging and maintenance of software that is integrated into ATE and NDI devices and systems and meets industry, customer, safety and regulation standards Assists with review, analysis, and translation of customer requirements into the design of software products for embedded devices and systems Supports building and writing code for embedded systems software to run on specific specialized hardware Contributes to integration of embedded software with hardware components Supports analysis, monitoring and improving the efficiency and stability of embedded software systems Participates in testing and debugging software for embedded devices and systems Supports implementation of current and emerging technologies, tools, frameworks, and changes in regulations relevant to software development and hardware technologies Supports tracking and evaluation of internal and supplier software team performance to ensure product and process compliance to project plans and industry standards Assists with performing embedded software project management functions Communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables Basic Qualifications (Required Skills/ Experience): Bachelor Degree Ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship 5+ years of experience programming in C, C++ or C# 5+ years of experience in embedded software development Preferred Qualifications (Desired Skills/Experience): Level 4: Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science and 9+ years of related work experience OR Bachelor’s Degree and 13+ years of directly related work experience OR 17+ years of related, relevant experience 5+ years of experience developing automation testing & maintaining automation tools 5+ years of experience with automation and robotic applications development 5+ years of experience with development or real-time software or integration of embedded software onto hardware 5+ years Experience with lab or test equipment, robotics, and/or inspection (i.e. Lidar/Ultrasound) hardware 1+ years of working knowledge of GitLab 1+ years interpreting electrical engineering drawings, schematics, and definition Ability to build, integrate and troubleshoot software components Knowledge of various engineering disciplines such as electrical, mechanical, and/or systems Knowledge of programming languages (e.g., C++, C#, C, Assembly, Ladder Logic, Numerical Control (NC) Programming, Matlab). Knowledge of communications, networking, and protocols (e.g., Transport Control Protocol/Internet Protocol (TCP/IP), File Transfer Protocol (FTP), Extensible Mark-up Language (XML), Wireless Access Protocol (WAP), and/or ARINC429 or MS1553. Knowledge of general and real-time software development and testing tools, including the capability and usage of real-time tools such as test instrumentation, robotics systems, and inspection systems Knowledge of how to derive and allocate requirements (e.g., system, sub-system, software) and show traceability throughout the product lifecycle Travel: Less than 10% CodeVue Coding Challenge: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced (Level 3): $126,650 - $171,350 Summary pay range for Senior (Level 4): $160,650 - $217,350 Potential signing bonus for eligible/qualified external candidates. Applications for this position will be accepted until May. 08, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense Space & Security (BDS) is seeking a F-15 Program Senior Radar Engineer to serve the Air Dominance Sensors & Special Program Team in Berkeley, MO . As a member of the team, you will provide technical engineering and program support for our domestic F-15 Radar Development Program. Duties will include internal and external coordination as well as guiding and assisting technical execution, all in support of delivering the F-15 Radar Scope as defined in the customer requirements. Position Responsibilities: Delivers technical excellence in support of F-15 Radar development Provides program and technical support for interfacing with program management and the Radar Supplier Provides review and approval of technical approaches and products Works closely with technical leads, engineers, and other Boeing impacted teams Provides technical support to ensure mission success and prompt resolution of anomalies Manages requirements for the Radar Supplier to meet the customer’s needs Participates in Radar Configuration Control Boards (CCB), design reviews, and customer technical meetings Supports common practices to meet the program’s cost, schedule, and quality Supports risk, issues, and opportunity management Control Account Manager (CAM) activities for the Radar Team and Radar Supplier Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 9+ years of related work experience and a bachelor’s degree or an equivalent combination of related work experience and technical education Preferred Qualifications (Desired Skills and Experience): Experience with development of avionics or electronics related hardware or software systems Control Account Manager (CAM) experience in support of Earned Value Management (EVM) Supplier engagement and oversight in support of technical execution Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Signing Bonus: Potential signing bonus for eligible/qualified external candidates Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850-$185,150 Applications for this position will be accepted until May. 11, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim U.S. Secret Clearance Pre-Start and final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is seeking experienced Mission Systems, Electronics & Electrical, and Avionics Integration Engineers to join the Phantom Works team in Berkeley, MO. At Boeing, we innovate and collaborate to make the world better. From the seabed to outer space, you can do work that matters with a company that values diversity, equity, and inclusion. We’re committed to creating a welcoming, respectful, and inclusive environment with strong opportunities for professional growth. Find your future with us. The Phantom Works Mission Systems team develops and integrates advanced mission-system components and technologies into functioning demonstration systems. This position will support analysis of models for interferometry, beam steering, geolocation, and other advanced problems. The candidate should be familiar with Computational Electromagnetics (CEM) tools and possess knowledge of Electronic Warfare, including advanced Electronic Attack techniques, Electronic Support (ES) such as interferometry and correlation-based direction finding (DF) and geolocation, and Electronic Protection (EP) features of radars and radar waveforms. The candidate will collaborate with the software team to create physics-based models for both mission planning and real-time calculations on embedded systems. You will work as a Mission Systems engineer across a broad range of avionics technologies, communications, navigation, identification, RF/IR/Electronic Warfare (EW) sensors, core processing, and stores management systems. You’ll have the chance to contribute to next‑generation open‑architecture, model‑based designs and collaborate with multiple disciplines. Selected individuals will help shape the future by developing and prototyping advanced mission capabilities. Position Responsibilities: Develop and validate requirements for unique sensors, electronic warfare, and other electromagnetic systems and components. Create and validate electrodynamics/physics models for interferometry, beam steering, and geolocation. Perform trade studies, modeling, simulation, and analysis to predict component and system performance and optimize designs against complex requirements. Invent and improve modeling and simulation techniques. Plan and execute critical tests to validate design performance against requirements. Analyze supplier performance to ensure requirement compliance. Research advanced technologies for potential application to company needs. Support cross‑Boeing program mission‑systems exchanges to maximize leverage and reuse. This position is expected to be 100% onsite. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 10+ years of work-related experience with a bachelor’s degree OR 7 + years of work-related experience with a master’s degree 10 + years experience with avionics subsystem design, integration and analysis (Examples include electronic warfare, comm systems, flight control computer, ground station interaction, etc.) Preferred Qualifications (Desired Skills/Experience): Experience with design and analysis of Electronic Warfare Systems Experience developing system requirements, verification plans, functional decomposition / allocation, and interfaces. Experience with avionics integration, analysis and verification Experience working with suppliers to ensure system integration and compliance with requirements Refer to "Engineer Job Classifications Appendix" for further clarification on the use of this job family. In locations where SPEEA representation applies, this job family will be covered by the terms of the collective bargaining agreement. Applicable and appropriate educational/certification credentials from an accredited institution and/or equivalent experience is required. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Potential signing bonus for eligible/qualified external candidates Summary pay range: $136,850-$185,150 Applications for this position will be accepted until May. 13, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Test & Evaluation Electromagnetics (BT&E) is seeking a Lead Electromagnetic Software Engineer to join our team in Berkeley , MO , as part of a broad, multi-site engineering capability. The Midwest Electromagnetics Test Labs team is seeking a Software Development Engineer in Test (SDET) who will lead the software group within our discipline. The successful candidate should be familiar with test automation frameworks and coding in C# and C++ and should be a proactive learner of advancing technologies. The SDET will work closely with the team to ensure the high coding standards are maintained. The position will involve building and maintaining our automation test suite and framework (some legacy code) and manual testing as required. The individual should have a persistent hunger to learn and solve problems in pursuit of continuous improvement. The candidate must also maintain a disciplined approach to configuration management, develop a vision for our software-hardware automation convention, and exemplify an open and receptive Software team leadership model. Software engineers are responsible for developing software and software tests throughout all phases of the software development life cycle (requirements, architecture, implementation, and verification). The software engineer will develop software in a Continuous Integration / Continuous Deployment (CI/CD) software build pipeline using an agile methodology focused on code quality, security, and automation. The candidate will also support projects to improve and incorporate new capabilities in the Electromagnetics lab areas. This position requires up to 10% travel to support partner-site activities. Position Responsibilities Include: Contributes to all phases of the software development life cycle (requirements, architecture, implementation, and verification) Works with small laboratory teams composed of diverse engineering skills to tackle complex problems on a variety of projects and features Responsible for developing technical products, plans, documentation, and briefings in support of program requirements Provide expertise on software methodologies and processes to internal/external customers Helps resolve programmatic and technical problems that would impact cost, schedule, and/or performance Develops, maintains, and documents software design practices across program spaces Troubleshoots and investigates problems across software components Maintains and organizes detailed statement of work from internal/external customers Supervises a small team of software engineers, balances workload, and assigns tasks based on engineering capability priority Provides data, recommendations, estimates labor costs, and development schedules for project planning Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science Experience with C/C++, Python, or C# Experience with software configuration management 8+ years of experience delivering software solutions to Production environment and writing quality, production ready code 3+ years’ experience leading software teams and/or projects Ability to travel up to 10% Preferred Qualifications (Desired Skills/Experience): Bachelor’s degree or higher in Computer Engineering, Electrical Engineering, or Computer Science Experience and/or coursework in Electromagnetic Theory, Transmission Line Theory, and/or Antenna Theory Robotics and automation design, programming, and build experience Experience or familiarity with laboratory test equipment (Vector Network Analyzer, etc.) Experience in a test laboratory environment Embedded code experience Experience leveraging AI-driven software solutions Experience defining, writing, managing, and controlling processes for a software organization or team Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Travel: This position requires up to 10% travel to support partner-site activities. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $136,850 - $185,150 Potential signing bonus for eligible/qualified external candidates. Applications for this position will be accepted until May. 08, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) team is seeking is seeking an F-15 Senior Mission Systems Integration Architect located in Berkeley, MO . As a member of the team, you will lead the development and execution of new avionics architecture solutions for emerging and existing F-15 International and USAF programs. You can expect to work with the F-15 Missions Systems teams, F-15 systems engineering team, F-15 program management, and others to develop an overall F-15 avionics integration solution for all F-15 platforms. Upon successful design of an architecture that meets all system requirements, the architect will lead the engineering team in its implementation and maintenance of that design through the development, lab test and flight test phases of the development cycle. The Mission Systems Integration Team develops overall system designs and capabilities for USAF and International customers. The designs and requirements developed by this team enables the F-15 aircraft’s mission capability by interfacing with multiple avionics subsystems (radar, weapons, sensors, etc.) and by implementing algorithms and developing the crew vehicle interface displays. The team is responsible for the design, requirements, coordination, and the various levels of testing of the Operational Flight Program (OFP) software as well as leading the development of the system and subsystem requirements. Position Responsibilities: Leads activities to develop, document and maintain avionics architectures, requirements, algorithms, interfaces and designs for the F-15 platform. Leads activities to develop, document and maintain avionics architectures, requirements, algorithms, interfaces and designs for the F-15 platform Serves as a subject matter expert for F-15 system level architecture, system-specific issues, and processes Provides technical leadership for integration projects of new technology implementation and demos Leads development, selection, tailoring and deployment of tools and processes for the integration team Leads the team in growing into Open Mission Systems (OMS) and Model Based Systems Engineering (MBSE) tools and processes Supports the F-15 System Safety and Systems Engineering Integration and Test (SEIT) team in Safety Critical Functions identification, tracing, and reviews Works with internal stakeholders and external customers to coordinate execution of ongoing hardware-software integration efforts in a fast-paced Agile environment Works with USAF customers and aircrew to develop and document complex electronic and electrical system requirements for navigation systems. Receives customer requests and analyzes them with consideration for contractual and technical impacts and translates into actionable system requirements Develops Architecture Roadmaps Provides Technical Lead Engineer (TLE) guidance and support to the integration team This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) A final U.S. Secret Clearance Pre-Start is required. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry Level 4 : 9+ years of work-related experience plus a Bachelor degree OR 7+ years of work-related experience with a Masters degree OR 4+ years of work-related experience with a PhD Preferred Qualifications (Desired Skills/Experience): Level 5 : 14+ years of work-related experience with a Bachelors degree OR 12+ years of work-related experience with a Masters degree OR 9+ years of work-related experience with a PhD Experience in Open Mission Systems (OMS) development Experience in Model Based System Engineering (MBSE) development Familiarity with Universal Command and Control Interface (UCI) message standard and Common Abstraction Layer (CAL) Typical Education/ Experience: Level 4: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Level 5: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Shift: This position is for 1st shift. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 4: $129,200.00 - 174,800.00 Level 5: $154,700.00 - 209,300.00 Boeing offers the best benefits in Aerospace. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Applications for this position will be accepted until May. 11, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) , is seeking a Senior Avionics Hardware Engineer - Fighters Mission Systems (Level 5) in Berkeley, MO. BDS is a global leader in the development, production, maintenance and enhancement of fixed-wing and rotary wing aircraft, commercial and government satellites, human spaceflight programs and weapons. Key markets include aeronautics, space and weapons. Core capabilities are in development, production and mission enabling upgrades of integrated solutions. BDS delivers the most digitally advanced, simply and efficiently produced and intelligently supported solutions to its customers. Po sition Responsibilities: Overall subject matter expert and technical lead engineer for the Mission Computers and Stores Management hardware for requirements development, avionics subsystem and system design, integration, subsystem/system/flight test, system verification, production/fielding, and supplier oversight Lead the hardware supplier design team in supporting all Tactical Fighters program needs Develop interface control documents describing mechanical, electrical, and software interfaces Perform technical problem investigation and resolution at subsystem, system, and platform integration levels Perform weapon capability development, implementation, and integration onto a fighters platform Out brief status to internal Boeing stakeholders/leadership and external customers Support subsystem testing on the Mission Systems Hardware Support system testing in ESIL and during Flight Test Support SCFTA efforts for the Mission Systems Hardware Support airworthiness efforts for hardware design, development and implementation This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position requires the ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Ability to obtain and maintain Special Access Program (SAP) clearance Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry (Level 5) 14+ years of work related engineering experience with a Bachelor’s or 12+ years of work related engineering experience with a Master’s or 9+ years of work related engineering experience with a PhD Preferred Qualifications (Desired Skills/Experience): Active U.S. Secret Security Clearance Previous experience working on tactical fighters program Previous experience designing, verifying and fielding avionics subsystems Experience leading teams and mentoring engineering peers Circuit card and backplane design and integration Conflict of Interest: Successful candidates for this job must satisfy Company’s Conflict of Interest (COI) assessment process. Typical Education/Experience: Leve 5: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range (Level 5): $154,700 - 209,300 Boeing offers the best benefits in Aerospace: The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Applications for this position will be accepted until May. 17, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Defense, Space & Security (BDS) - Phantom Works organization is seeking a highly skilled and experienced engineer to serve as the Signature Assurance and Verification Lead Engineer . This role is pivotal in leading the Signature Assessment and Verification (SAV) team for a new Air Dominance Program in St. Louis, Missouri . The successful candidate will play a critical role in enabling stealth performance of advanced platforms through effective manufacturing and operational processes. Key Responsibilities: Team Leadership: Lead and mentor the SAV team, ensuring effective collaboration and performance Cross-Functional Collaboration: Work closely with the EM QA multi-discipline team to uphold quality assurance standards Process Development: Develop and validate processes utilizing diagnostic equipment for signature verification Testing and Troubleshooting: Conduct developmental testing, debugging, and troubleshooting for signature verification methods Quality Assurance Criteria: Define and establish QA test criteria for all signature verification tests Quality Review: Review work instructions for quality assurance and witness part conformance to standards Testing Oversight: Oversee QA testing and acceptance processes, ensuring compliance with specifications Data Management: Track signature verification tests and maintain comprehensive signature data test records System Level Correlation: Correlate and assess verification at the system level to validate lower system level tests Non-Conformance Management: Provide review dispositions for non-conformances and analyze trends to evaluate the effectiveness of corrective actions System Development: Assist in the development of a signature assessment system, including software and methodologies This position offers a unique opportunity to contribute to cutting-edge defense technologies and work in a dynamic team environment. If you are passionate about engineering and have the qualifications outlined above, we encourage you to apply. Basic Qualifications (Required Skills and Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement Proven experience in signature assessment, verification engineering, or a related discipline Proficiency in diagnostic equipment and signature verification methods Relevant low observables design, integration, test, or maintenance experience Active U.S. Top Secret Security Clearance Ability to obtain Special Program Access (U.S. Only Citizenship required) Preferred Qualifications (Desired Skills and Experience): Master’s degree in Engineering, Physics, Math, or a related field Previous experience leading engineering teams in a defense or aerospace environment Demonstrated ability to manage multiple projects simultaneously with strong organizational skills Experience in creating specifications, procedures, and technical reports Skills in data visualization and effective communication of results to diverse audiences Strong verbal and written communication skills for technical documentation and stakeholder engagement Willingness to travel as needed (up to 10%) Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process. Signing Bonus: Potential signing bonus for eligible/qualified external candidates Drug Free Workplace: Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. The Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Level 4: $136,850 - $185,150 Level 5: $164,900 - $223,100 Applications for this position will be accepted until May. 26, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active). This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) is seeking a Ground Systems Integration Engineer (Experienced or Senior Level) to support an Air Dominance Fixed Wing Proprietary Program in Berkeley, MO . Step into a fast-paced, cutting-edge program where your expertise will drive the design, integration, and testing of advanced, cloud-based systems that empower mission planning, debrief, and tactical Command & Control (C2) solutions for fixed-wing platforms. As a key contributor, you will support the development, analysis, integration, and testing of innovative engineering solutions for critical Ground System capabilities, including but not limited to: Mission Planning and Debrief Command and Control Systems Network and Communication Architectures Situational Awareness Enhancements You will take ownership of developing prioritized mission systems digital threads, ensuring seamless support for ground systems from initial design through to final delivery. You will work with a high-performing, cross-functional team in an agile environment, driving next-generation capabilities from design through delivery. This role offers the chance to innovate with open-architecture, model-based designs while collaborating across disciplines to support critical defense missions. If you’re passionate about advancing mission-critical systems and thrive in a collaborative, fast-moving environment, this is your opportunity to make a significant impact. Why Join Us? Impactful Work: Be part of a team that plays a crucial role in ensuring the safety and security of our nation. Your work will directly contribute to the development of advanced military capabilities. Innovative Environment: Collaborate with a diverse group of talented professionals who are dedicated to pushing the boundaries of technology and engineering excellence. Career Growth: We are committed to your professional development. Benefit from mentorship opportunities, tuition reimbursement program, and a culture that encourages continuous learning and innovation. Position Responsibilities: Model-Based Systems Engineering (MBSE) implementation of ground systems design artifacts, including requirements, verification/test procedures, interfaces, behaviors, and architecture Partner with customers to develop and document complex electronic and electrical system requirements. Performs work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Supports lab and verification testing and design validation to ensure system designs meet operational and functional requirements. Analyze test results and troubleshoot problems in both simulated and unsimulated testing environments Collaboration with peer engineering disciplines (e.g. software, hardware, product security) to ensure integration of different design elements This position is expected to be 100% on-site. The selected candidate will be required to work onsite at one of the listed location options . This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) A final Secret Clearance Pre-Start is required. This position requires ability to obtain program access, for which the U.S. Government requires U.S. Citizenship only. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry Level 3: 5+ years of work-related experience with a bachelor’s degree OR 3+ years of work-related experience with a master’s degree Experience developing or integrating avionics or ground systems Experience in at least one of the following areas: requirements development, design and modeling, or SIL/HIL test planning and execution Strong desire to learn and apply MBSE principles in a system development environment Aptitude for collaboration and problem solving in a fast-paced environment Preferred Qualifications (Desired Skills/Experience): Level 4: 9+ years of work-related experience with a bachelor’s or 7+ years of work-related experience with Masters or 4+ years with a PhD Knowledge of MBSE principles and tools (e.g, Cameo/MSOSA, SysML) Experience working in a closed area Conflict of Interest: Successful candidates for this job must satisfy Company’s Conflict of Interest (COI) assessment process. Typical Education/Experience: Experienced (Level 3) : Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Senior (Level 4): Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Relocation: This position offers relocation based on candidate eligibility. Note: Basic relocation will be offered for eligible internal candidates. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Shift: This position is for 1st shift. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Boeing offers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs. Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features: Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Experienced (Level 3): $112,200 - $145,200 Senior (Level 4): $136,850 - $177,100 Applications for this position will be accepted until May. 11, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

ProAmpac is a leading global flexible packaging company with a comprehensive product offering. We provide creative packaging solutions, industry-leading customer service and award-winning innovation to a diverse global marketplace. We continue to grow and would love for you to join our team! \n To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made, upon request, to enable individuals with disabilities to perform the essential functions. \n\n • · Repair & maintain machinery, equipment, facilities, systems & grounds\n, • · Timely process work orders/requests, prioritizing most critical repairs\n, • · Work closely with maintenance, management, internal customers and other departments\n, • · Inspect and perform preventative maintenance which may include mechanical, electrical, HVAC, plumbing, fire systems, interior and exterior areas. This is not a full list there may be other areas of responsibility\n, • · Coordinate with specialists internal and external when more complex work is needed\n, • · Schedules maintenance, repairs and installations to minimize disruptions when possible\n, • · Report on and update management and systems on projects, status, schedules, completion changes\n

Job DescriptionWe are a small, family-owned business with an interesting and flexible work environment. Reply with resume. Duties will include, but are not limited to the following: Building maintenance, light janitorial and repair Light electrical, plumbing, HVAC . Paper hanging and painting Grounds maintenance, landscaping, and repair Pool maintenance Preventative maintenance Other responsibilities as assigned Qualifications & Requirements: Must be available for on-call emergencies Must be able to lift 50 pounds Must be able to work outdoors Must be willing to work independently Must maintain a professional appearance, manner and approach while on duty Good interpersonal communication skills Self-motivated, dependable, punctual, and a positive attitude Able to plan, organize, and prioritize projects and time Must be able to pass a background check English-Speaking

Job Description Communication is the pulse of Army National Guard units, and it’s up to the Signal Support Systems Specialist to ensure the information keeps flowing so the military doesn’t miss a beat. Signal Support Systems Specialists are responsible for integrating signal systems and networks; performing signal support functions and unit-level maintenance on authorized signal equipment; and installing, operating, and maintaining radio and data distribution systems. Advanced team members supervise and train other Soldiers; maintain and install signal support systems and terminal devices; provide technical assistance and training for automation and communications equipment; prepare maintenance and supply requests for unit-level signal support; and operate and perform preventative maintenance checks and services on assigned vehicles. Job Duties • Maintain radio and data distribution systems, • Perform signal support functions and technical assistance for computer systems, • Provide technical assistance and training for local area networks, • Maintenance for equipment, terminal devices, assigned vehicles, and power generators Some of the Skills You’ll Learn • Mechanical and electrical principles, • Preventive maintenance procedures, • Line installation and wiring techniques, • Communication security policies and procedures Helpful Skills • Interest in working with electronic equipment, • Interest in problem solving Through your training, you will develop the skills and experience to enjoy a civilian career with companies that produce communications and electronic equipment. Additional study and two years of electronics experience will also qualify you for certification as an Associate Certified Electronics Technician. Earn While You Learn Instead of paying to learn these skills, get paid to learn. In the Army National Guard, you will learn these valuable job skills while earning a regular paycheck and qualifying for tuition assistance. Job training for Signal Support Systems Specialists consists of 10 weeks of Basic Training, where you’ll learn basic Soldiering skills, and 18 weeks of Advanced Individual Training (AIT) which will include a combination of hands-on and classroom training. Benefits/Requirements Benefits • Paid training, • A monthly paycheck, • Montgomery GI Bill, • Federal and State tuition assistance, • Retirement benefits for part-time service, • Low-cost life insurance (up to $400,000 in coverage), • 401(k)-type savings plan, • Student Loan Repayment Program (up to $50,000, for existing loans), • Health care benefits available, • VA home loans, • Bonuses, if applicable, • Military enlistment in the Army National Guard, • Must be at least a junior in high school, or have a high school diploma or a GED certificate, • Must be between the ages of 17 and 35, • Must be able to pass a physical exam and meet legal and moral standards, • Must meet citizenship requirements (see NATIONALGUARD.com for details) Requires military enlistment. Programs and benefits are subject to change. Ask your Army National Guard recruiter for the most up-to-date information. Actual MOS assignment may depend on MOS availability.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Defense, Space & Security (BDS) in St. Louis, MO is looking for Process Mechanic - Tube Benders! Process Mechanics may also be required to perform sheet metal fabrication, spray painting, welding, chemical processing, plating, and hand/machine sewing. Individual job duties may include: \n • Setup and run power operated NC-controlled tube benders, inspect, pressure test, clean vapor degrease, swage, square, burr, mark finish trim, cut, identify, mask, cap, preserve, and apply color identification.\n, • Install several types of fittings including Wiggins, Dynatube, DME, Gamah, Ringlok, Perma Swage, Cryofit, Sierracin Harrison, and AN.\n, • Perform numerous end form operations including size, veil, bead, shrink, saddle, flare, expand, and reduce.\n, • Route and trial fit tubes on aircraft and mock-ups to determine size and shape of tubes.\n, • Must be able to read and work to blueprints, visual aids, work instructions, and process specifications.\n, • Use a variety of hand tools, power tools, equipment, and measuring instruments, tube benders, coordinate measuring machines, band saws, manual benders, swaging machines, pressure test benches, vapor degreasers, micrometers, protractors and calipers.\n\n As a member of a team environment, Process mechanics participate in decisions that affect the team which include: manage daily work schedules, commit to team goals, objectives and metrics (cost, quality, schedule, cycle, safety),coordinate team communication, seek appropriate performance training, and participate in team meetings. Team members are also expected to initiate process improvements and implement lean best practices. Responsibilities may include but are not limited to the following: \n • Composite fabrication, layup, drill, and repair\n, • Assemble precision assemblies, set up and operate ream fixtures to drill, ream, counter sink, spot face, hone and bore for mating major assemblies.\n, • Assemble a variety of prototype assemblies ranging from tool fixtures to other assets with minimal engineering guidance\n, • Perform engineering test of production parts and equipment in collaboration with mechanical design, industrial engineering and production operations.\n, • Partner with design to modify and fabricate tools, parts and build prototype tooling. Periodically inspect tools for repair.\n, • Develop, prepare, and maintain all documentation related to design, fabrication, and manufacturing of engineering test and production tooling and equipment and associated calibration test and equipment.\n, • Bench assemble electrical or electronic components into assemblies and systems before methods and procedures have been established.\n, • Machine new and replacement parts for precision-built tools and machine parts.\n, • Painting, fill/fair, and special coatings application\n, • Ability to travel up to 10% of the time\n\n Basic Qualifications (Required Skills/Experience): \n • Experience with tubing and ducting manufacturing/installation/maintenance\n, • 1+ years of experience in a manufacturing or fabrication environment\n\n Preferred Qualifications (Desired Skills/Experience): \n • Experience working with detailed work instructions or reading and interpreting blueprints and drawings\n, • Experience operating a CNC machine (i.e. CNC rivet machine, CNC milling machine)\n, • Experience working with Microsoft Office Suite\n\n Conflict of Interest: Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Additional Information: \n • The selected candidate must be able to work any shift, as assigned.\n, • This is an hourly position governed by the IAM Collective Bargaining agreement.\n, • New Hires, as well as employees who transfer from non-union positions, may be required to attend some type of training upon their start. Once any required training has been completed all new employees will be considered on probation for a period of one hundred twenty (120) calendar days. Continued employment is contingent upon successful completion of any required training and the probationary period.\n\n Shift: • The candidate must be able to work any shift assigned\n Relocation: • Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense\n Total Rewards: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $22.00/Hourly- $25.00/Hourly Applications for this position will be accepted until May. 29, 2026 Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Hiring for a Maintenance Technician - Urgent Need - 3rd shift - $33.50/hr - Apply Now!!! Job Description • Perform setups and changeovers of the production line and production machinery and equipment., • Maintain conveyors, gearboxes, motors, cappers, fillers, labeling, and packaging machines., • Conduct adjustments, preventive maintenance, and repairs on equipment to maximize run time on the line., • Perform mechanical troubleshooting, diagnosing, and repairs on all breakdowns., • Minimum 2 years of experience in a high-speed manufacturing environment performing general maintenance and setting up and running machinery and/or packaging lines., • Minimum 2 years of experience troubleshooting, diagnosing, and repairing packaging equipment., • Minimum 2 years of experience performing setups and adjustments on machinery or equipment, running and operating machinery and equipment., • Minimum 2 years of experience replacing motors and gearboxes., • Experience in high-volume production lines is preferred., • Food industry experience translates well and is preferred, though not required. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Position Summary: We are seeking a reliable, hands-on Maintenance Technician to support our barrel electroplating operations. This role is responsible for maintaining production equipment, troubleshooting mechanical and electrical issues, and ensuring safe, efficient plant operations. Key Responsibilities: • Maintain and repair electroplating equipment (barrels, hoists, pumps, filters, conveyors), • Troubleshoot mechanical, electrical, and plumbing issues, • Perform preventative maintenance to reduce downtime, • Inspect and maintain tanks, chemical systems, and facility equipment, • Assist with equipment installation and upgrades, • Maintain maintenance logs and records, • Follow all safety procedures and policies Qualifications: • 2+ years maintenance experience in manufacturing or industrial setting, • Strong mechanical skills; basic electrical troubleshooting, • Experience with pumps, motors, gearboxes preferred, • Ability to read schematics, • Welding/fabrication a plus, • Able to lift 50 lbs and work in active environment Compensation & Benefits: • 100% premium health insurance coverage for employee and dependents (no dental and vision), • Paid time off and holidays after probationary period, • simple IRA plan matched to 3% of gross pay Company DescriptionFully automated barrel electroplating operation.Fully automated barrel electroplating operation.

Job Description Our client has a great career opportunity in Washington, MO for a night shift Electrical Maintenance Tech. This role ensures that plant equipment and facilities are kept in good electrical/mechanical repair and working order, enabling continuous production. Job Title: Electrical Maintenance Technician Location: Washington, MO Pay Range: $33 - $37 hourly Shift: 12 Hour Overnight What’s in it for you? • Great Culture and team!, • We are an equal opportunity employer., • Drug Free Workplace., • Organize, and facilitate maintenance on all production and facility equipment with emphasis on equipment uptime and to resolve quality and production related issues in the spirit of continuous improvement, including electrical, pneumatic, hydraulic and mechanical troubleshooting., • Read and interpret machine electrical and mechanical drawings., • Troubleshoot programmable controllers, electronics, circuit analysis, mechanics, hydraulics, and pneumatics., • Use electrical test equipment as needed for repair and troubleshooting., • Repair and rebuild electrical and mechanical components., • Installation, modification and fabrication of equipment and systems to meet production needs and schedules., • Communicate clearly maintenance situations from one shift to anotherWhat are the qualifications?, • Strong industrial electrical experience required., • Experience repairing and troubleshooting in electrical, pneumatics, hydraulics, heavy industrial wiring, variable speed drives and controls, • Ability to learn process, equipment specifications and company standards by actively consulting resources, associates, manuals, training department and policies., • Good practical sense working with and troubleshooting equipment problems.., • Must be computer literate, familiar with the Windows Operating system., • Able to work independently About ManpowerGroup, Parent Company of: Manpower, Experis, Talent Solutions, and Jefferson Wells ManpowerGroup® (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands – Manpower, Experis, Talent Solutions, and Jefferson Wells – creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent.

Job DescriptionDescription: Principal Objective of Position: The Maintenance Technician repairs and maintains all mechanical, electrical equipment, plumbing fixtures, structural facilities and grounds of the property. The Maintenance Technician works towards the common goals of satisfactory cash flow, positive resident relations and optimal resident retention. #ZR Requirements: Join Our Team as a Full-Time Maintenance Technician! Are you a hands-on, detail-oriented, and proactive individual with a passion for problem-solving and property upkeep? We’re looking for a dedicated Maintenance Technician to join our team full-time and ensure our properties are maintained to the highest standards, providing a safe and comfortable environment for our residents. What You'll Do: • Repair & Maintain: Perform routine and preventative maintenance on property buildings and equipment, including HVAC, plumbing, electrical, and more., • Troubleshoot & Fix: Respond promptly to work orders, diagnose issues, and complete necessary repairs to ensure everything runs smoothly., • Inspect & Report: Conduct regular inspections of the properties to identify potential problems and address them proactively., • Technical Skills: You have experience in general maintenance work, including HVAC, electrical, plumbing, and appliance repairs., • Problem-Solving Mindset: You approach maintenance challenges with a positive attitude and a knack for troubleshooting., • Attention to Detail: You take pride in your work and ensure tasks are completed thoroughly and accurately., • Customer Service Focus: You value providing excellent service to residents by responding to maintenance requests promptly and professionally., • Hours: Monday to Friday, 8 AM - 5 PM with flexibility. On-call as needed to respond to emergency maintenance requests., • Benefits: We offer comprehensive health, dental, and vision insurance, a 401k plan, paid time off (PTO) based on longevity, and holidays off., • Impactful Role: Help ensure that our properties are well-maintained and that our residents enjoy a safe, comfortable living environment., • Dynamic Environment: Work in a fast-paced, hands-on role where every day presents new challenges and opportunities. Apply Today and Start Your Maintenance Career with Us!

Job Description Job Title: Maintenance Technician – Property Management Job Type: Full-Time Reports To: Property Manager / Maintenance Supervisor Compensation: $20.00-25.00/hour Position Summary: We are seeking a skilled and reliable Maintenance Technician to join our property management team. The Maintenance Technician is responsible for the day-to-day maintenance and repair operations of residential and/or commercial properties, ensuring the safety, functionality, and overall appearance of the property. This position plays a key role in delivering a high standard of living and service to tenants and property owners. Key Responsibilities: • Perform routine inspections and preventive maintenance on building systems and common areas., • Complete work orders in a timely manner for electrical, plumbing, HVAC, carpentry, painting, and appliance repair., • Respond promptly to emergency maintenance requests, including after-hours calls as needed., • Maintain exterior grounds and common areas including trash pickup, snow removal, landscaping, and basic custodial tasks., • Ensure all maintenance operations are conducted according to safety and OSHA standards., • Assist in unit turnovers, including painting, repairs, cleaning, and appliance installation., • Maintain accurate records of work performed, time, and materials used., • Coordinate with vendors and contractors for specialized repairs., • Communicate effectively with tenants and property management regarding maintenance issues and status., • High school diploma or GED required; technical certification or trade school a plus., • 2+ years of maintenance experience, preferably in property management or multi-family housing., • Strong knowledge of general maintenance (electrical, plumbing, HVAC, carpentry, painting)., • Ability to work independently and manage time effectively., • Strong problem-solving and troubleshooting skills., • Basic computer skills for work order management systems., • Valid driver's license and reliable transportation., • Truck or van required., • HVAC or EPA Certification, • Bilingual skills (English/Spanish), • Competitive pay based on experience, • Health, dental, and vision insurance with employer-shared premiums, • Paid time off and holidays, • 401k access, • Monthly mileage reimbursement for use of personal vehicle, • Opportunities for training and advancement

Job Description DIVE IN TO A NEW CAREER WITH A LESLIE'S COMPANY: In September 2022, Stellar Manufacturing was acquired by Leslie's as an affiliate. Stellar Manufacturing is a contract manufacturer of solid particle products and specializes in chemical processing services such as specialty tableting, compaction granulation, and granular filling. We support the manufacturing of a variety of consumer and industrial products including water treatment chemicals, janitorial and sanitation products, agrochemicals, raw materials, and more. With over 30 years of providing best-in-class products and solutions to our customers, there is nothing that we value more than the development and growth of our team. Both Leslie's and Stellar strive to create a positive and fun atmosphere where our Team Members feel valued and are enthusiastic about the contributions they make to the success of Stellar Job Overview Stellar Manufacturing, an affiliate of Leslie’s, is seeking a Maintenance Technician to support our chemical manufacturing operations. This role is responsible for installing, maintaining, and repairing mechanical, electrical, and production equipment to ensure safe, efficient, and reliable plant operations. The ideal candidate is hands-on, safety-focused, and experienced in troubleshooting, preventive maintenance, and equipment repair in an industrial environment. Job Responsibilities: • Operate and monitor equipment to troubleshoot issues and test performance., • Review and complete work orders accurately; seek clarification when needed., • Set up and operate drill presses, grinders, and other metalworking tools to fabricate or repair parts., • Repair, rebuild, and adjust equipment, including mechanical and control components., • Install machinery, equipment, devices, and instruments., • Perform preventive maintenance, including lubrication, filter changes, inspections, and cleaning; document activities in the preventive maintenance system., • Coordinate with the supervisor to initiate purchase orders for parts and equipment., • Maintain accurate logbook entries to document maintenance activities and equipment issues., • Ensure compliance with plant labeling requirements and proper chemical handling., • Recommend improvements to equipment performance and maintenance processes., • Read, write, and speak English to document issues, complete logs, and understand technical manuals and parts catalogs., • Minimum of three (3) years of experience as a maintenance mechanic or completion of relevant technical coursework., • Perform basic math, take accurate measurements, and read blueprints and/or schematics., • Experience using tools and equipment such as drill presses, hand tools, micrometers, welding equipment, and drafting tools., • Basic computer proficiency., • Perform physical tasks including standing, walking, climbing, bending, stooping, kneeling, and crawling for extended periods., • Lift up to 100 pounds and work in confined or uncomfortable positions., • Work safely in environments with potential chemical exposure., • Wear required personal protective equipment (PPE), including respirators., • Comprehensive medical, pharmacy, dental, & vision plan options., • Health savings account (with enrollment in the high deductible health plan option)., • Health & dependent care flexible spending accounts., • Company-paid basic life and AD&D insurance., • Voluntary supplemental life insurance., • Company-paid short-term disability and voluntary long-term disability insurance., • Pre-tax and Roth 401(k) with company match., • Paid vacation, sick, and bereavement leave., • Paid holidays, including a floating personal day., • Employee assistance and wellness programs., • Earned Wage access is available, allowing early access to a portion of your earned wages before payday. Leslie’s recognizes a critical component to our continued success is our people. Leslie's is committed to developing and fostering a culture of diversity and inclusion within our company and the communities we serve. A key aspect of building a great team is valuing ideas from many viewpoints, which is why we place a priority on identifying and hiring talented individuals from all backgrounds and perspectives. #FieldHiring Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Job Description: Crysalis Biosciences, Inc. is seeking to hire multiple motivated Maintenance Technicians to join our team. In these roles, you will help ensure operational excellence by performing a variety of maintenance duties and responding to service requests. Our maintenance technicians work to ensure proper equipment operation and support overall facility maintenance. Key Responsibilities: * Inspect, operate, and test machinery or equipment to diagnose malfunctions and determine appropriate corrective actions. * Preform PMs, work on pumps, conveyors, agitators, valves, heat exchangers, grain lifts, hammer mills, bag house filters, pipes, gears, belts, insulation, heat traces * Understand and work on Air Compressors and Delivery, Fermenter mechanicals, seals, spargers, agitators, CIP skids, sanitary standards, and pumps * Perform routine maintenance on equipment and systems. * Repair machines, equipment, or structural components. * Assemble, install, or repair wiring, electrical/electronic components, pipe systems, plumbing, machinery, or equipment. * Order necessary parts, supplies, or equipment. * Plan and lay out repair work using diagrams, drawings, blueprints, maintenance manuals, or schematics. * Perform general cleaning and upkeep of buildings or property. * Record the type and cost of maintenance or repair work completed. * Assist with other duties as required. * Follow all safety programs, standard work practices, and procedures (SOPs). Qualifications & Experience: * High School diploma or equivalent, trade school training preferred. * 1 to 2 years of experience with maintenance or repair of industrial equipment (pumps, valves, compressors, conveying equipment). * Welding experience on carbon/stainless steel preferred. Skills & Technical Requirements: * Equipment maintenance and utilization of trade-related tools * Repairing and troubleshooting * Critical thinking * Equipment selection and installation * Ability to work independently and prioritize tasks Physical Requirements: * Must be able to manage confined space entry, climb ladders and steps, and lift a minimum of 50 lbs * Must adapt to outside work environments (cold, heat, wind, rain, snow, slippery surfaces). * May be exposed to high noise levels at times. * Must be able and willing to work safely, including wearing and using task-specific appropriate personal protective equipment. Company DescriptionBiomanufacturing facility intended for the production of low-carbon fuels and renewable industrial materials. The company transforms existing industrial infrastructure into advanced biorefineries that use sustainable biomass feedstock and microbial fermentation to produce ethanol and co-products such as biogenic CO2, distillers' grains, and protein-rich syrups, helping the energy and materials sectors move toward lower-emission, circular production systems.Biomanufacturing facility intended for the production of low-carbon fuels and renewable industrial materials. The company transforms existing industrial infrastructure into advanced biorefineries that use sustainable biomass feedstock and microbial fermentation to produce ethanol and co-products such as biogenic CO2, distillers' grains, and protein-rich syrups, helping the energy and materials sectors move toward lower-emission, circular production systems.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. Position Summary: This is a skilled position requiring advanced knowledge of boiler, HVAC, electrical distribution, control systems maintenance, industrial mechanical skills, pipefitting, and a variety of building and equipment maintenance tasks in the plant or on the premises. Location: 7405 Page Ave St. Louis, MO Hours: 2pm - 10:30pm Monday - Friday (overtime as needed) *Training will be on split shift for the first 2 weeks. Hours sibject to change based on the Union bid system. Pay: $36.41 + $0.75 Shift Differential + bonus (bi-weekly pay schedule) Hire: Direct, Full Time What You'll Do: • Perform various types of welding operations required for repair and/or installation of equipment.\n, • Under the direction of the supervisor, must be capable of operating the Storeroom by assisting in the following areas: • Receive parts, tools, labels, and supplies into the Storeroom and check against the purchase order for accuracy of receipt.\n\n, • Maintain stock inventory by entering required information, maintain bin cards, storeroom requisitions, and employee issue files as required.\n\n, • \n, • Generate purchase requisitions as required and forward to the appropriate authority for approval.\n, • Maintain written and/or electronic records as required by management (i.e. cGMP and ISO procedures).\n, • Keep storeroom area, equipment, and surrounding work area clean at all times.\n\n, • Exercise extreme caution in order to not damage other material or property while operating movingequipment and must at all times exercise extreme caution for the safety of other employees.\n, • Comply fully with all hazardous permitted procedures, including but not limited to, lockout/tagout,confined space entry or fall protection.\n, • When required for maintenance or repair activities, is responsible for removing accumulated hazardouswastes from affected area and for transporting such wastes to the hazardous waste storage area.\n, • Stock all maintenance inventory and production supplies.\n, • Work in all areas of industrial maintenance performing a variety of construction and repair tasks.\n, • Uphold good safety record and troubleshooting skills.\n\n Skills, Abilities, and Experience: Required: \n • Five (5) plus years of industrial plant maintenance experience required, working in a particular craft or multi-craftposition.\n, • Associates degree in Industrial Technology or Industrial Maintenance required, • Will accept 10 years' relevant experience & Highschool Diploma/G.E.D. equivalent in lieu of Associates Degree.\n\n, • Ability to read and comprehend written instructions, safety warning labels, machine instruction manuals andschematics.\n, • Basic math, writing and data entry skills.\n, • Demonstrated proficiency in performing advanced maintenance functions in a safe manner, including but not limited to the following:, • Industrial electronics, welding, pipe fitting, carpentry, shop machine operation, pump repair, boiler repair, HVAC. (May be either from education or experience)\n\n, • Must be able to perform basic rescue and life-saving functions when serving as safety backup., • Company provides CPR training/certification - must be willing abd able to comply.\n\n\n Preferred: \n • Stationary Engineering Certification (Boiler Certification).\n, • HVAC Certification.\n, • Exceptional repair, troubleshooting and/or mechanical skills related to Boilers, HVAC Systems, Lathe, Fabrication and/or similar equipment.\n, • Expereince working cross-functionally with diverse teams.\n, • Previous experience with Instrumentation Controls.\n\n Other: \n • Reliable, good communication skills.\n, • Must be able to communicate and coordinate efforts with people from all levels of the organization.\n, • Able to work with minimal direct supervision.\n, • Ability to access all parts of all production equipment, including, but not limited to the following:, • Confinedspaces; ceiling mounted equipment; equipment in pits, machines that must be climbed, crawled under, orotherwise entered with limited access.\n\n, • Good hand/eye coordination.\n, • May be expected to move, carry and lift approximately 70 pounds.\n, • May be expected to climb heights of approximately 30 feet.\n, • Must be able to walk and stand for long periods of time.\n, • Must be able to wear personal protective equipment, as required.\n, • Equipment listed below may be used as needed to assist in these Required Competencies:, • Forklift, scissor lift, all shop equipment, power tools, various welders, hoists.\n\n, • Ability to climb ladders and narrow stairs safely.\n\n What STERIS Offers: We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being, and financial future. Benefits will start after 45 days. Here is just a brief overview of what we offer: \n • Market Competitive Pay\n, • Extensive Paid Time Off and added holidays\n, • Excellent Healthcare, Dental and Vision Benefits\n, • Long/Short Term disability coverage\n, • 401(k) with company match\n, • Maternity & Paternal Leave\n, • Additional add-on benefits/discounts for programs such as Pet Insurance\n, • Tuition Reimbursement and continued educations programs\n Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. Req ID: 53105 Job Category: Maintenance/Skilled Trades Location:

Job DescriptionSenior Biopharmaceutical Processing Technician Upstream Cell Culture & Large‑Scale Manufacturing Are you passionate about biologics and large‑scale biomanufacturing? As a Senior Biopharmaceutical Processing Technician, you’ll play a hands-on role in producing life‑changing biologic medicines used in both commercial and clinical settings. Working in a cGMP‑regulated cleanroom, you’ll focus primarily on upstream cell culture operations, operating large‑scale bioreactors and supporting critical production processes from start to finish. This is an excellent opportunity to deepen your experience with advanced bioprocessing technologies, contribute directly to pharmaceutical products, and work alongside a collaborative, quality‑driven manufacturing team. What You’ll Do You will be a key contributor to safe, efficient, and compliant manufacturing operations, with responsibilities that include: Manufacturing & Operations • Execute manufacturing batch records, work instructions, and SOPs with a proactive “right‑the‑first‑time” mindset, • Perform aseptic cell culture operations, including propagation of mammalian cell lines, • Operate and monitor large‑scale production bioreactors (50L–2000L) and associated upstream equipment, • Conduct large‑scale filtration and centrifugation as part of upstream bioprocessing workflows, • Interpret production schedules, prioritize tasks, and meet manufacturing timelinesDocumentation & Compliance, • Accurately document all activities in compliance with cGMP requirements, • Assist with batch record reconciliation and ensure complete, accurate documentation, • Complete document reviews and revisions, including daily record review, task tracking, and database updates, • Support quality investigations by providing clear information and improvement recommendationsTeam & Continuous Improvement, • Support department functions such as maintaining production suites, equipment, logbooks, and supplies, • Participate in and, when needed, lead shift exchanges, one‑on‑one discussions, and team meetings, • Engage in continuous improvement and lean initiatives to enhance quality and efficiency, • Critically evaluate processes, anticipating potential issues before they occurSafety & Quality, • Apply consistent aseptic technique to protect product quality and prevent contamination, • Promote and follow all safety procedures and cleanroom guidelines, • Maintain a strong commitment to quality, accuracy, and complianceWhat You Bring (Essential Qualifications), • Bachelor of Science diploma or equivalent, • Minimum 2 years of experience in manufacturing, operations, production, laboratory, or related environments, • Ability to work in a cGMP‑regulated environment and follow detailed procedures, • Strong basic math skills to support calculations and measurements, • Proficiency with MS Office for documentation and communication, • Demonstrated critical thinking and problem‑solving skills, • Ability to read, write, and communicate effectively in English, • Ability to understand and accurately follow written and verbal instructions, • Ability to:, • Wear full cleanroom gowning (bodysuit, gloves, hair/beard nets, face covers, safety glasses, Tyvek garments), • Lift at least 25 pounds independently, • Stand for approximately 80% of the shift, • Schedule: Rotating 12‑hour shifts, • Day: 6:45 a.m. – 6:45 p.m., • Night: 6:45 p.m. – 6:45 a.m., • Typical rotation: 7 working days over a 2‑week period Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.