Electrical jobs in Tucson, ArizonaCreate job alerts

The Electrical Engineer is responsible for all electronic control, radio communication, monitoring systems, and components including computer-related hardware and software. • Medical * Dental * Vision * Employer Paid & Voluntary Life Insurance * 401(k) Employer Match plus Annual Profit-Sharing Contributions * Paid Vacation, Sick Time & Holidays * Employer Paid Disability Plan * Employee Assistance Program * CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. • Company-paid life/AD&D insurance, • Company-paid short-term disability, • Paid sick/vacation/holiday, • 401k/Company Funded Pension Program (program is dependent upon location and job type), • Employee Assistance Program (EAP), • Additional voluntary benefits $95,000 to $105,000 Depending on Experience • Ability to assist and support the Plant Automation Engineer with the operation, maintenance, and programming of all plant instrument/analyzer systems including logic, analog and graphics, and all other technology that may be acquired, • Assist in the maintenance of instrument/analyzer/electrical systems, server-based high-level analyzer systems, and data historians such as OSI Pi, FLS ECS/QCX; assist CIS with the maintenance of corporate IT network, • Work with the plant’s team to develop new control systems applications for projects, • Work with the energy team to identify improvements and participate in energy audits, • Assist with all aspects of capital projects including sizing of conductors and protective devices; load calculations for new and existing power systems in preparation for additions, changes, and capital projects interconnecting to the plant electrical system, • Identify worn and defective components as well as appropriate replacements; provide field inspections and supervision for electrical work on projects, • Support plant by diagnosing and correcting electrical problems, • Provide technical and safety training to Plant Electricians, • Complete design and drawing updates for replacement components, • Ability to apply corporate standards to designs and solutions suggested/implemented; use new technologies at the plant such as smart MCCs, including design, training of electricians, and updating documentation/diagnostic systems, • Replace or upgrade worn and depreciated components; design, change, and modify instrument/analyzer systems, • Willing and able to work flexible hours as needed to maintain plant instrument/analyzer systems, • Must be a self-starter and be able to work independently, • Ability to maintain skills as necessary to keep pace with the ever-changing and improving technology for plant instrument/analyzer systems, • Strong communications and management skills – will work with, direct, assist and/or follow vendor services for troubleshooting and maintenance of all instrument/analyzer systems, • Troubleshooting skills and critical thinking are a must, • Ability to read and edit process flow drawings; the ability to read and create logic decision charts, • Ability to travel - required to travel to company facilities and other meeting locations on occasion, • Prior experience in computer automated control and instrumentation and/or cement production processes, • Knowledge of National Electrical Code (NEC), • Understanding of instrument/analyzer system fundamentals #LI-PW1

Primary City/State: Tucson, Arizona Department Name: Procurement-BUMCT Work Shift: Day Job Category: Lab Join one of Arizona's leading diagnostic labs at Sonora Quest, where your work directly supports life-saving medical testing and patient care. Whether you're beginning your lab career or bringing experience to the table, this role offers hands-on impact and career growth in a high-demand healthcare setting. Come do great work on behalf of better health! POSITION SUMMARY This position assists technical lab staff and may be responsible for the collection, receipt, and processing of biological specimens into the department, preparation of samples for analytical testing, and may perform waived and/or limited moderate complexity testing if CLIA minimum requirements are met or as approved by the CLIA Medical Director. This position reports to department leadership and takes direction from higher-level technical personnel. Performs all functions according to established policies, procedures, regulatory and accreditation requirements, as well as applicable professional standards. SHIFT Saturday and Sunday from 0400-1430 PHYSICAL DEMANDS/ENVIRONMENT FACTORS Able to stand, walk, bend, swat, reach and stretch frequently. Use material handling equipment to push and/or pull up to 75 pounds and required to lift, push and/or pull up to 25 pounds. Requires manual dexterity. Must use standard precautions due to threat of exposure to blood and body fluids, chemical, electrical and biological hazards. Ability to distinguish colors and to take direction and assimilate instructions quickly. Requires use of computer, printers, copiers, telephone, fax and department specific equipment. KNOWLEDGE, SKILLS AND ABILITIES • Must exhibit personal maturity and responsibility., • Excellent reading, writing and math abilities., • Communicates effectively in oral and written formats sufficient to demonstrate comprehension., • Ability to perform detailed work; work with frequent interruptions, multi-task, problem solve and memorization., • Ability to take direction and assimilate instructions quickly., • Detail oriented and exceptional organizational skills., • Basic computer skills., • Must exhibit skills in exceptional customer service, good performance review and passing on-site competency evaluation and /or assessment as defined by the department. MINIMUM QUALIFICATIONS • High School Diploma or equivalent and must be 18 years or older if performing phlebotomy., • Progression through career ladder II-IV is subject to completion of career ladder requirements., • Position may require DHS Fingerprinting Certification or the ability to obtain fingerprint certification., • Dependent on department/location, candidate must possess a valid state driver's license in the state of employment and be eligible for coverage under the company auto insurance policy., • Phlebotomy/CLA certification as defined by state regulations. PREFERRED QUALIFICATIONS • Previous clinical laboratory experience., • Successful completion of a laboratory assistant program., • Basic knowledge of specimen requirements and handling., • Knowledge of medical terminology., • Additional related education and/or experience. EEO Statement: EEO/Disabled/Veterans Our organization supports a drug-free work environment. Privacy Policy: Privacy Policy

Job Description Must be able to pass a “stick” SMAW/ASME 1X 6G Qualification test. With 6010 root pass, 7018 Hot pass and 7018 Cap. Essential Duties and Responsibilities include the following. • Must have at least 8-10 years of Pipe Welding experience, • Must be able to pass a stick 6G pipe test with 6010 root and 7018 hot pass and cap., • Must be able to perform basic math and read a tape measure., • Pipe fitting experience is a plus. Education and/or Experience: High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively with employees and supervisory personnel. Mathematical Skills: Ability to work with mathematical fundamentals of plane and solid geometry. Ability to measure, layout and use basic math skills working with fractions and decimals. Reasoning Ability: Ability to solve practical problems and deal with a variety of situations. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Skills and Abilities Knowledge of occupational hazards and safety precautions applicable to the welding trade. Skill in the welding of ferrous and nonferrous metals. Ability to read and independently work from plans, sketches, diagrams, and blueprints. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand for more than 8 hours per day; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder level; climb or balance; stoop, kneel, crouch or crawl, and talk or hear. The employee must regularly lift and/or carry up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The employee is frequently exposed to high, precarious places, fumes or airborne particles and extreme heat. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, extreme cold, risk of electrical shock and vibration. The noise level in the work environment is usually loud. Company DescriptionCAD is in office position only. In addition to creating “Shop” drawings for fabrication, you will be responsible for creating and reading detailed installation plans for Plumbing and Mechanical (Hydronic) Piping, and HVAC. Providing consistent and accurate material take-offs for purchasing is essential to this role. 3D modeling and navigating combined trade models in a 3D environment for coordination both internally and externally. ESSENTIAL DUTIES AND RESPONSIBILITIES -\tIntermediate 3D modeling skills in AutoCAD -\tMotivated, adaptive, and strong personality -\tStrong interpersonal skills -\tExcellent abilities with computers and Microsoft Office products -\tProficiency with Autodesk Products, ie: AutoCAD Fabrication, Revit -\tStrong Time-Management Skills -\tStrong Attention to detail and accuracy with numbers -\tAbility to communicate professionally with internal and external staff -\tAbility to work in a very fast-paced environment QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); One to two years prior experience or an equivalent combination of education and experience with CAD. Trade Schooling, Or CAD CertificationCAD is in office position only.\r\n\r\nIn addition to creating “Shop” drawings for fabrication, you will be responsible for creating and reading detailed installation plans for Plumbing and Mechanical (Hydronic) Piping, and HVAC. Providing consistent and accurate material take-offs for purchasing is essential to this role. 3D modeling and navigating combined trade models in a 3D environment for coordination both internally and externally.\r\n\r\n\r\nESSENTIAL DUTIES AND RESPONSIBILITIES \r\n•\tIntermediate 3D modeling skills in AutoCAD\r\n•\tMotivated, adaptive, and strong personality\r\n•\tStrong interpersonal skills\r\n•\tExcellent abilities with computers and Microsoft Office products\r\n•\tProficiency with Autodesk Products, ie: AutoCAD Fabrication, Revit\r\n•\tStrong Time-Management Skills\r\n•\tStrong Attention to detail and accuracy with numbers\r\n•\tAbility to communicate professionally with internal and external staff\r\n•\tAbility to work in a very fast-paced environment\r\n\r\nQUALIFICATIONS:\r\nTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\r\n\r\nEDUCATION and/or EXPERIENCE:\r\nHigh school diploma or general education degree (GED); One to two years prior experience or an equivalent combination of education and experience with CAD.\r\nTrade Schooling, Or CAD Certification

Job Description Join the Award-Winning Team at OOROO AUTO – “BEST PLACE TO WORK!” Are you an A-Level Automotive Technician (Mechanic) looking for a new and better work experience? OOROO Auto is on the lookout for experienced, skilled professionals to join our rapidly expanding team. Be part of an innovative company that values excellence, growth, and work-life balance. Why OOROO AUTO? • SIGNING BONUS: We value your skills and experience., • Comprehensive Benefits Package: Health, dental, and vision plans with significant employer contributions., • Above Industry Pay: Competitive salary that reflects your expertise., • Work-Life Balance: Enjoy paid time off (PTO) and weekends off., • Retirement Security: 401K with company match and a company-sponsored 529 college savings plan., • Career Growth: Opportunities for continued education and advancement as our company grows., • Perform high-quality maintenance and repair services, including suspension, brakes, A/C & heating, electrical, belts, radiators, and water pumps, ensuring vehicles are returned to customers in top-notch condition., • Experience & Expertise: Minimum of 5 years in automotive repair and maintenance, with a strong ability to diagnose and resolve vehicle issues efficiently., • Communication Skills: Ability to clearly explain car care needs and the services provided to our customers., • Passion for Excellence: Detail-oriented, committed to being best in class, and passionate about delivering superior car care., • Reliability & Autonomy: Punctual, dependable, and able to work independently while maintaining high-quality service standards. OOROO AUTO – Where Your Expertise Meets Opportunity.

Job DescriptionFind out why OOROO AUTO was named “BEST PLACE TO WORK!" OOROO Auto is seeking Automotive Technicians (Mechanics) to join our rapidly growing automotive maintenance and repair team. Receive SIGNING BONUS, health benefits, above industry pay, paid time off, 401K retirement plan with company match, and weekends off in a fun, energetic company culture! This is an opportunity to grow your career as this innovative company grows. Call Leroy, our Director of Operations, at 520-891-5318 for information or questions. Here's what you'll do: • Provide maintenance and repair services for OOROO customers, including suspension, brakes, ac/heating, electrical, belts, radiators, water pumps etc. with attention to quality and safety, • Emerging automotive brand with huge potential, • Competitive pay based on skill level and experience with room to grow, • Paid time off (PTO) and weekends off (no, that’s not a typo!), • Health Coverage with significant employer contribution, • Dental and vision plans, • Company-matched 401K retirement plan, • Company sponsored 529 college savings plan, • Stock option plan, • Continued education and career growth as your knowledge and skills progress, • A-Level Techs will have a minimum of 5 years' experience repairing and maintaining a variety of vehicles and efficiently diagnosing vehicle issues, • Intermediate-Level Techs will have a minimum of 5 years of experience as an automotive technician, • General Service Techs will have a minimum of 2 years of experience as an automotive technician, • Strong communication skills with the ability to explain car care needs and services delivered, • Passionate about car care, obsessed with details and interested in being best in class, • Punctual, reliable, and ability to work autonomously to deliver quality and timely service, • Possess a valid Driver’s License, be accepted as an approved driver by our insurance company, and ability to pass a job-related criminal background check

Job Description NOTICE: If selected for any position, the company requires a background investigation, a pre-employment DOT physical and drug screen. Full job description available upon selection for interview. Sun Link Streetcar is an Equal Opportunity/Reasonable Accommodation Employer GENERAL DESCRIPTION: This position performs maintenance activities in support of Sun Link Streetcar. The responsibility of this classification includes independently performing - under general supervision - skilled electrical/electronic and mechanical work to diagnose, maintain, repair, rebuild, overhaul, service, inspect, and test streetcar transit vehicles and equipment and their electronic systems and equipment; he/she also performs testing and repair of communications systems, surveillance equipment, and other related equipment. Incumbents in this classification must be able to work independently and unsupervised for extended periods of time. QUALIFICATIONS: Applicants must have a high school diploma or equivalent; Associate Degree preferred and two years’ experience in related field. Possess a valid Arizona driver’s license, ability to pass Arizona DOT medical/physical examination and a pre-employment drug screen. Successfully complete training programs with post-training qualification period, ability to be re-certified periodically on Standard Operating Procedures as well as through examination on all rules and hands-on proficiency, ability to write clear and concise reports and must be available to work weekends, holidays, evening and late night hours. ESSENTIAL FUNCTIONS: Perform safety and preventive maintenance inspections of vehicles, systems, and equipment. Documents defects, maintenance, and repairs. Tests, maintains, repairs, and overhauls streetcar vehicle electrical, electronic and mechanical systems and equipment in accordance with schematic drawings, wiring diagrams, operations manuals and manufacturer instructions. Operates and maintains shop equipment and tools. Must maintain a personal toolbox on-site with general specific tools (list provided). Makes time and material cost estimates and maintains records. Performs re-railing of equipment. Repairs, replaces or modifies electronic and electrical components and defective parts for a variety of equipment and systems controls. Troubleshoots analog and solid-state electronic systems. Installs special electronic testing systems; installs communication devices on cars. Services and maintains microprocessor control systems. Inspects new microprocessor and solid state systems installed by contractors. Calibrates and repairs test equipment. Maintains parts inventory and computer inventory records. Operates computers for testing, diagnosing, fault log management, and related data input and retrieval. Maintains a safe and clean shop area. Prepares various activity and status reports, documents defects and repairs on inspection forms, work orders, or designated computer programs. Must be available to work weekends, holidays, evening and late night hours. BENEFITS: Benefits include health care coverage for employees and dependents, personal time off (PTO), life insurance, sick leave, paid holidays, and a 401(k) retirement plan. OPENING DATE: April 09, 2025 CLOSING DATE: SALARY: $22.81 - $31.45 per hour NOTICE: If selected for any position, the company requires a background investigation, a pre-employment DOT physical and drug screen. Full job description available upon selection for interview. Sun Link Streetcar is an Equal Opportunity/Reasonable Accommodation Employer SCHEDULE: SUNDAY 11:00 PM - 7:30 AM MONDAY 11:00 PM - 7:30 AM TUESDAY 11:00PM – 7:30AM WEDNESDAY 11:00 PM - 7:30 AM THURSDAY 11:00 PM - 7:30 AM Company DescriptionSun Tran is Tucson's award-winning public transportation system, which is operated by RATP Dev/Tucson Transit Management, LLC (TTM) and under contract with the City of Tucson.Sun Tran is Tucson's award-winning public transportation system, which is operated by RATP Dev/Tucson Transit Management, LLC (TTM) and under contract with the City of Tucson.

Job Description SUMMARY: The maintenance technician is responsible for completing building/property maintenance and repair and performing unit make-ready duties on multifamily residential buildings. The position reports to the property manager. ESSENTIAL FUNCTIONS: Complete duties on make-ready checklist: 1. Service appliances, plumbing and electrical fixtures., 2. Repair or replace old and faulty parts., 3. Re-key locks., 4. Replace burned out light bulbs and globes., 5. Interior painting Other: 1. Assists in maintaining inventory of tools, equipment, and supplies., 2. Picks up trash on property., 3. Reports all needed repairs to Maintenance Foreman., 4. Assists with other types of maintenance when necessary., 5. Attends all instructional classes conducted by management. Performs other duties as assigned., 6. Is on call for emergency maintenance. QUALIFICATIONS: To perform this role successfully, an individual must be able to perform all essential functions satisfactorily. The requirements define the knowledge, skill, and/or ability necessary to perform the essential functions. EDUCATION AND EXPERIENCE: High school education and/or technical skills training or experience in multifamily residential building maintenance preferred. KNOWLEDGE AND SKILLS: Working knowledge of basic maintenance tools required to perform the job duties.

Job DescriptionFind out why OOROO AUTO was named “BEST PLACE TO WORK!" OOROO Auto is seeking Mobile Automotive Technicians (Mechanics) to join our rapidly growing automotive maintenance and repair team. Receive SIGNING BONUS, health benefits, above industry pay, paid time off, 401K retirement plan with company match, and weekends off in a fun, energetic company culture! This is an opportunity to grow your career as this innovative company grows. Call Leroy, our Director of Operations, at 520-891-5318 for information or questions. Here's what you'll do: • Provide maintenance and repair services for OOROO customers, including suspension, brakes, ac/heating, electrical, belts, radiators, water pumps etc. with attention to quality and safety, • Emerging automotive brand with huge potential, • Competitive pay based on skill level and experience with room to grow, • Paid time off (PTO) and weekends off (no, that’s not a typo!), • Health Coverage with significant employer contribution, • Dental and vision plans, • Company-matched 401K retirement plan, • Company sponsored 529 college savings plan, • Stock option plan, • Continued education and career growth as your knowledge and skills progress, • Mobile Techs will have a minimum of 2 years of experience as an automotive technician, • Strong communication skills with the ability to explain car care needs and services delivered, • Passionate about car care, obsessed with details and interested in being best in class, • Punctual, reliable, and ability to work autonomously to deliver quality and timely service, • Possess a valid Driver’s License, be accepted as an approved driver by our insurance company, and ability to pass a job-related criminal background check

Job Description Maintenance Technician Location: South Tucson Terms: Temp to Hire (3 months) Pay: DOE Requirements: Minimum of 2 years of experience in mechanical or electrical field. Able to work overtime and be on call status. GENERAL RESPONSIBILITIES • Respond to production needs that would ensure reliability, availability and safety of production equipment, • Repair and maintain injection molding equipment and related auxiliary equipment, • Carry out plan for required and preventive maintenance repairs and service, • Assist Maintenance Supervisor with new equipment modifications and projects, • Would need to be available to work weekends, holidays and on call basis SPECIFIC FUNCTIONS, • Preventive maintenance of injection molding equipment, • Schedule regular P.M. requirements, • Perform actual P.M. duties, • Record data electronically or manually, • Have the ability to analyze data to determine possible trouble areas, • Repair machines and auxiliary equipment (i.e., oil leaks, adjustments, calibrations, etc)., • Maintain spare parts inventory and supplies required for P.M. program and daily operation, • Assist in the development of an ongoing improvement plan for maintaining equipment (P.M. program), • Awareness and compliance to ISO 14000 requirements per company policies and procedures., • Other tasks assigned by the Maintenance Supervisor (i.e. cleaning machines, screw and barrel maintenance, building maintenance etc.)TRAINING REQUIREMENTS, • Mechanically inclined, self motivated, • Electrical, hydraulic and mechanical knowledge, preferably in an injection molding environment., • PLC basic knowledge (programming a plus), • Some computer skills, • Can work with minimal supervision, dependable, • Orientation training QUALIFICATIONS: • High School Diploma, • Minimum of 2 years experience in industrial mechanical or electrical field, • Self-starter/ self motivated and able to work with a minimum amount of direct supervision, • Must be able to read and interpret blue prints (Hydraulic and Electrical), • Mechanically inclined, • Working knowledge of robotic automation and hydraulic, pneumatic and electrical systems, • Must have a safety conscience work ethic, • Able to work overtime and be on call status Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Company DescriptionNESCO Resource Company Overview Established in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers. Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Description Manufacturing Maintenance Technician- Flexible Packaging Job Summary: The Manufacturing Maintenance Technician is responsible for maintaining, repairing, and inspecting printing presses, laminators, slitters, and peripheral equipment. The technician will be responsible for general plant and facility repair. Preferred Education: Associates degree, high school diploma or equivalent professional experience. Preferred Experience: • Preference for flexible packaging industry experience or food & beverage manufacturing, • Must adhere to all quality processes, including documentation and verification as they apply to the performance of your tasks., • Able to lift between 50 lbs., • Must be able to walk, squat, crouch, turn, twist, stretch, climb steps, grab, pull, push, and bend throughout an 8-to-12-hour shift., • Knowledge of flexographic printing production equipment and/or food & beverage**, • Knowledge of electric motors, pumps, and pneumatic systems. **, • Candidate must have knowledge of control systems components including PLC logic, control system wiring, VFDs, 3 phase motors, potentiometers, encoders, electro-pneumatically actuated valves and pneumatic control systems. **, • Ability to perform routine mechanical or electrical maintenance. Ability to work from sketches, drawings, and wiring schematics,, • Preferred experience with machinery of OEMs such as Uteco, DCM ATN, Bielloni, Nordmeccanica is a big plus. **, • Ability to maintain records regarding material, equipment, and repairs., • Maintain and repair equipment using hand and power tools., • Install, service and repair electric motors, heaters, coolers, pumps., • install and test parts as needed., • Ensures the proper use, care and storage of tools and equipment., • Performs all duties in conformance with good manufacturing practices to avoid contamination of raw materials., • Dismantles and reassembles units or parts to clean, repair, maintain or adjust the machine., • Perform and documents preventive maintenance tasks as outlined in the PM logs.

Job Description Job Description Who is RHP Properties? Headquartered in Farmington Hills, Michigan, RHP Properties () is the nation's largest private owner and operator of manufactured home communities. With more than 370 communities throughout 30 states, we continue to expand our footprint to provide accessible and affordable housing across the country. All of this would not be possible without the energy and drive of our talented employees! We invest in our employees, with regular training, opportunities for advancement, and fun events to bring everyone together. We are presently seeking a Maintenance Technician for our Crescent Manor community located in Tucson, AZ, who will perform general grounds and lawn maintenance, as well as basic repairs to homes owned by the community, for 30 hours per week. As a successful Maintenance Technician, you will: • Perform maintenance to ensure homes and community areas are in proper condition., • Execute assigned work orders and report status to the Community Manager timely and efficiently., • Promote goodwill by handling all contacts with residents, prospective residents, visitors and other employees in a spirit of courtesy, cooperation and attentiveness., • Use established procedures to identify deficiencies and take immediate action with community manager approval., • Ensure community grounds are appropriately manicured. Regularly treat for weeds, rake leaves, plant flowers/shrubs, spread mulch/woodchips/stones, trim shrubs and hedges, cut down and remove tree limbs as needed, and perform other lawn care services as necessary., • Remove and dispose of garbage on community grounds, including common areas, main entrance and from resident’s sites as needed to maintain community appearance., • Perform snow removal using a snow blower, hand shovel or a plow truck, as applicable., • Advise Community Manager or Maintenance Supervisor of residents who do not properly dispose of their excess garbage or have large/bulk items that may require pickup arrangements., • Perform regular inventories of maintenance and grounds equipment and supplies to advise Community Manager of equipment and supply needs., • Maintain order and appearance of garage and storage areas., • Maintain all maintenance and grounds equipment to keep it clean and cared for., • Comply with national, state and local health and safety laws to reduce accident occurrences and to protect residents, the company, team members and vendors., • Perform seasonal pre-maintenance service on a timely basis., • Remain available for “on call” duties as needed., • Participate in the refurbishing of Community Owned homes., • Perform repairs and maintain the community water and sewer lines., • Perform other duties as assigned. Job Requirements • A minimum of 2 years of maintenance experience, preferred., • High School Diploma or GED preferred., • Excellent customer service skills., • Valid operator’s license, maintenance of a good driving record at all times, and insurability under the Company’s policy at all times., • Working knowledge of plumbing, electrical, appliance repairs, HVAC, and carpentry., • May need to provide own tools., • Ability to bend, stretch, twist, walk continuously, and access restricted spaces., • Ability to operate maintenance equipment and other equipment., • Ability to lift or to move up to 75 pounds., • Ability to efficiently perform job responsibilities with minimal supervision. This is a part-time opportunity with competitive compensation. Company DescriptionRHP Properties is an accomplished real estate investment firm specializing in the acquisition and professional management of manufactured home communities. We own and manage over 372 manufactured home communities in 30 states, with a combined value of approximately $6+ billion. We are the largest private owners in the industry. Our organization's success stems from the ability to effectively target and acquire well-located Manufactured Home Communities, whose value can be enhanced through RHP’s comprehensive and competent management. RHP is committed to creating a wonderful environment where our residents always enjoy a well-maintained and attractive community. RHP Properties is America's Home. Live Life. Live it Here.RHP Properties is an accomplished real estate investment firm specializing in the acquisition and professional management of manufactured home communities. We own and manage over 372 manufactured home communities in 30 states, with a combined value of approximately $6+ billion. We are the largest private owners in the industry. \r\n\r\nOur organization's success stems from the ability to effectively target and acquire well-located Manufactured Home Communities, whose value can be enhanced through RHP’s comprehensive and competent management. RHP is committed to creating a wonderful environment where our residents always enjoy a well-maintained and attractive community.\r\n\r\nRHP Properties is America's Home.\r\nLive Life. Live it Here.

Job Description The Maintenance Technician is responsible for providing technical expertise and support of ongoing operations and improvements within the plant. The primary focus of this position will be our mechanical, electrical and control systems. The Maintenance Technician will also assist the department with mechanical and operational issues. This is a hands-on position with extensive interaction with production. Essential Duties: 1. Must be able to troubleshoot relay controls, P.L.C. controls, and C.N.C. controls., 2. Must be able to design relay circuits, P.L.C. circuits to perform tasks from verbal/written instructions., 3. Must be able to troubleshoot hydraulic and lor pneumatic circuits and design same., 4. Must be proficient in welding steel, cast iron, stainless steel, and aluminum., 5. Must be willing to train and share new knowledge gained with other employees., 6. Must be willing and able to perform all functions of maintenance (i.e.: Janitorial, Building Maintenance, Maintenance "B", and Maintenance "A")., 7. Must learn plant infrastructure; Sprinkler mains, their shut off valves, areas serviced, inspector test stations, drain valves, Electrical entrances, disconnects, areas serviced. Load capacity, load used, gos entrances their shut offs areas serviced load levels. Water entrances and main runs. Sewer line locations and path., 8. Must have good communications techniques to be able to communicate with outside technical sources, and within the organization., 9. Responsible for reporting work related injuries and near misses to supervision., 10. Responsible for wearing all required PPE and following applicable safety/environmental rules., 11. Responsible for correcting or reporting unsafe conditions observed within the plant. Schedule: 2pm - 10:30/12:30a, training will be completed in the morning shift 5a-1:30p/3:30p Employee will be a temp for their first 90 days, after 90 days will be evaluated based on attendance, performance & overall safeness may become a permanent employee. All applicants must pass a background check & drug test (marijuana is included). Also, please make sure your resume is update Benefits: • Dental insurance, • Health insurance, • Life insurance, • 10 hour shift, • 8 hour shift, • Day shift, • Monday to Friday, • Overtime, • In-person

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Experience: 10 - 20 Years, • Certifications: Possess and maintain all ASE Certifications, holding Senior Master Status., • Diagnostic Skills: Proficient in all diagnostic procedures, including hard electrical issues and driveability problems, across all vehicle systems, makes, and models., • Repair Capabilities: Capable of complete system breakdown and reassembly, including but not limited to engine jobs, transmission replacement, tune-ups, electrical system testing, and overall vehicle maintenance., • Warranty Management: Responsible for managing all warranties., • Quality Control: Oversee and ensure quality control of all jobs completed by all technicians., • Technical Guidance: Proficient in looking up wiring diagrams and procedures; able to teach and guide lower-level technicians., • Policy Compliance: Follow and ensure all other technicians follow established policies and procedures., • Shop Management: Monitor shop operations and maintain quality control on all outgoing jobs., • Leadership: Lead by example, communicating problems and concerns to the manager to resolve issues proactively.A Technician, • Experience: 10 - 20 Years, • Certifications: Possess and maintain all ASE Certifications, holding Senior Master Status., • Diagnostic Skills: Proficient in all diagnostic procedures, including hard electrical issues and driveability problems, across all vehicle systems, makes, and models., • Repair Capabilities: Capable of complete system breakdown and reassembly, including but not limited to engine jobs, transmission replacement, tune-ups, electrical system testing, and overall vehicle maintenance., • Support Role: Assist the Lead Technician with warranties and overseeing other technicians' work., • Technical Guidance: Able to look up wiring diagrams and procedures; teach and guide lower-level technicians., • Policy Compliance: Follow all established policies and procedures. B Technician • Experience: 3 - 10 years, • Responsibilities: Fulfill all responsibilities of a C Technician plus perform all fluid exchanges and light-duty parts replacements (belts, hoses, alternators, batteries, brake pads, and rotors)., • Training & Development: Primarily a part-changing technician who is expected to learn from A Technicians and actively work towards ASE certifications., • Policy Compliance: Adhere to all policies and procedures, ensuring excellent inspection and quality control in a timely manner., • Research: Research procedures for specific jobs using all available data before starting work. C Technician • Experience: 1 - 3 years, • Responsibilities: Perform lube technician duties, including oil changes, fluid checks, oil filter changes, air filter checks, and code retrieval using scanners., • System Knowledge: Possess basic knowledge of all vehicle systems, including coolant, transmission, and power steering, as well as brake checks and tire torquing., • Additional Duties: Perform minor duties, including opening/closing responsibilities such as flag placement, trash disposal, and shop cleaning (mopping and sweeping).Certification Goal: Work toward obtaining ASE Certifications. All Technicians • Procedures: Follow all opening and closing procedures, as well as all company policies and procedures., • Inspections: Perform inspections properly and take good, accurate pictures during the inspection process., • Communication: Comply with requests from the manager or service writers., • Cleanliness: Maintain cleanliness of the shop, break room, and employee's bathroom daily., • Productivity: Ensure continuous engagement in tasks; "if there is time to lean, there is time to clean."Punctuality: Opening technicians arrive 15 minutes before start time; all other technicians arrive 10 minutes before start time to prepare for the shift.

Job Description We are looking for a skilled Remodeler to join our team. As a Remodeler, you will be responsible for performing various remodeling tasks such as, carpentry, demolition, drywall, painting, framing, concrete finishing, tile laying, and restoration work. The ideal candidate will have experience in these areas and possess the necessary skills to complete projects accurately and efficiently. Must have reliable transportation Duties & Experience: Perform various remodeling tasks, including but not limited to: • Demolition, • Wood framing, • Concrete finishing, including pouring and leveling, • Tile laying for floors, walls, and other surfaces, • Drywall installation, • Exterior and interior painting, • Doors, windows, and trim • Proven experience in framing, cabinet installation, concrete finishing, masonry work, tile laying, electrical installation, and restoration work., • Strong attention to detail and ability to follow instructions., • Excellent problem-solving skills., • Ability to work independently or as part of a team., • Good communication skills. Benefits: • Competitive salary based on experience., • Opportunities for career growth and advancement., • Paid time off., • Vacation & sick time. If you meet the requirements and have the necessary experience, we would love to hear from you. Please submit your resume and any relevant certifications or licenses for consideration. Job Type: Full-time Schedule: Monday to Friday Work Location: In person

Job Description We are looking for a Laser Manufacturing Technician who wants more than just a job—you want to be part of a team that is building the future of laser technology. In this role, you’ll be hands-on with state-of-the-art equipment, assembling, aligning, and testing high-power visible and infrared laser systems. This position is ideal for someone who is detail-oriented, enjoys working with precision optics and electronics, and takes pride in producing work that matters. You’ll receive full training in our procedures and work alongside a skilled team in a collaborative, supportive environment. What You’ll Do * Assemble and align fiber amplifier modules using fiber cleaving, splicing, and precision tools. * Package finished fiber assemblies into laser amplifier modules. * Conduct functional and quality checks on components and systems. * Record and report performance data with accuracy and clarity. * Maintain equipment and workstations for efficiency and safety. * Collaborate with engineering on continuous improvements and process feedback. * Contribute to R&D and new product projects when needed. What We’re Looking For * Experience with at least several of the following: * Handling and cleaning optics * Fiber splicing and cleaving * Precision assembly with small parts and tools * Laser measurement instruments * Mechanical/electrical assembly and testing * Strong organizational skills and attention to detail. * Ability to follow detailed technical instructions. * Basic proficiency with Windows and Microsoft Office. * Clear written and verbal communication in English. * Reliable, punctual, and motivated to learn. Company DescriptionWho We Are AdValue Photonics is a leader in next-generation fiber laser technology. Based in Tucson, Arizona, we develop and manufacture innovative laser solutions that empower industries worldwide. From precision glass and ceramics machining to advanced scientific applications, our technology is helping solve some of today’s toughest challenges. Our Mission We believe that practical, efficient, high-performance lasers unlock innovation. Our goal is to enable new possibilities in research, manufacturing, and materials processing while building an environment where employees can grow, collaborate, and make a real impact. What We Offer Competitive pay with performance-based growth opportunities. Comprehensive benefits including health, dental, vision, 401(k), and paid time off. A collaborative team culture—your contributions matter here. A hands-on, cutting-edge work environment with opportunities to learn new skills. The stability of an established company with the excitement of continued growth. Why Join Us At AdValue Photonics, you’ll be part of a team that values innovation, curiosity, and problem-solving. Whether you’re working in the lab, on the production floor, in sales, or in administration, your work directly supports technologies that are shaping the future.Who We Are\r\nAdValue Photonics is a leader in next-generation fiber laser technology. Based in Tucson, Arizona, we develop and manufacture innovative laser solutions that empower industries worldwide. From precision glass and ceramics machining to advanced scientific applications, our technology is helping solve some of today’s toughest challenges.\r\n\r\nOur Mission\r\nWe believe that practical, efficient, high-performance lasers unlock innovation. Our goal is to enable new possibilities in research, manufacturing, and materials processing while building an environment where employees can grow, collaborate, and make a real impact.\r\n\r\nWhat We Offer\r\n\r\nCompetitive pay with performance-based growth opportunities.\r\n\r\nComprehensive benefits including health, dental, vision, 401(k), and paid time off.\r\n\r\nA collaborative team culture—your contributions matter here.\r\n\r\nA hands-on, cutting-edge work environment with opportunities to learn new skills.\r\n\r\nThe stability of an established company with the excitement of continued growth.\r\n\r\nWhy Join Us\r\nAt AdValue Photonics, you’ll be part of a team that values innovation, curiosity, and problem-solving. Whether you’re working in the lab, on the production floor, in sales, or in administration, your work directly supports technologies that are shaping the future.

Job DescriptionDescription Ventura Properties, LLC is looking for a Maintenance Journeyman with proficientcy in: Home Remodeling to include; dry-wall, painting, plumbing, carpentry, electrical, swamp coolers, and HVAC. This role is integral to the overall success of our operations, specializing in Townhome Rental turns and remodels, requiring an individual who is highly skilled in problem-solving, self-motivated, and passionate about providing quality customer service. The ideal candidate should possess strong technical aptitude, profound understanding of maintenance operations, and up-to-date knowledge of industry regulations. To excel in this role, the Maintenance Journeyman should possess excellent communication and organizational skills, with the ability to handle complex, multi-functional projects, all while working with minimal supervision. This is a full-time position, Monday - Friday, and periodically on-call for emergency resident situations. SIGN ON BONUS - Earn a $500 BONUS after 90 days of successful employment. Benefits Offered: Health, Dental & Vision Insurance, Accidental/Life Insurance, Short Term Disability, Flexible Spending Account and 401(K) (Matching Option). Employer Paid Benefits: Telemedicine, Accidental/Life Insurance, Holiday, Vacation & Sick time Equal Opportunity Employer Safety Sensitive Position CORE RESPONSIBILITIES • Skilled execution:Performing installation, maintenance, and repair work with a high level of expertise in a specific trade., • Interpretation:Reading and understanding technical documents like blueprints, schematics, and diagrams to plan work., • Problem-solving:Troubleshooting issues and finding solutions for problems in the systems or equipment they work on., • Independence:Working independently without constant supervision from a master craftsman., • Electrical: Installing conduit, wiring, and electrical apparatus; installing switchgear; and troubleshooting circuits., • Carpentry: Fabricating and installing framework, windows, doors, and trim; performing rough and finish carpentry; and repairing wood structures., • Plumbing: Installing and repairing water, gas, and drainage systems, including pipes, fittings, and fixtures like toilets, sinks, and water heaters., • Ability to follow oral and written instructions, • Problem-solving: Analyzing and resolving complex plumbing issues., • Communication: Clearly explaining issues and solutions to clients., • Customer service: Providing excellent service to customers., • Independence: Working unsupervised and managing time effectively., • Team: Working well with team members collaborating on projects., • Physical stamina: Having the physical ability to perform manual labor., • MUST be 25 years or older., • HVAC and EPA Refrigerant certification is a must, • Applicants should be able to lift up to 50 pounds. Personnel are expected to perform repetitive physical tasks that require lifting, pushing, and pulling of material/product and standing throughout each shift., • Valid driver's license and Reliable transportation., • Successful background check. **Successful background check required

Job DescriptionFAA Assembler 1Job Title: FAA Assembler 1 Location: Oro Valley Terms: Temp to Hire Salary/rate: $17/hour Requirements: HS Diploma/GED- REQUIRED The Assembler position performs disassembly, assembly, re-work, and minimum testing of various electrical/electronic equipment. Job Core Responsibilities: Use electric soldering equipment to the IPC-A-610B, Class 3 standard Cut, prepare and pre-tin wires, prepare batteries, Apply conformal coat, marking and adhesive bonding Follow written and verbal instructions Complete work according to instructions, specifications and procedures, under direct and/or limited supervision Perform a variety of complex mechanical and/or electromechanical assembly operations in accordance with company instructions and procedures Conduct inspections of own and/or other associates work to ensure correctness in accordance with company and/or customer drawing Maintain a clean and orderly workstation adhering to 6S standards Maintain an acceptable attendance and safety record Adhere to all company guidelines, policies and procedures Additional job duties and tasks as needed Assist other departments with job duties, tasks, training, and development as needed Complete additional job duties and tasks as assigned and instructed by Lead Tech / Supervisor Job Specifications Education: High School Diploma or equivalent combination of relevant education and work experience Experience: Minimum of 2 years prior related work experience in an electrical/avionics manufacturing/testing environment Skills: Able to read and comprehend regulations and instructions in English Effective oral and written communication Must be able to work all shifts and available for overtime and weekends as needed Proficient in using the tools, equipment, and inspection aids applicable to the scope of work assigned Use hand tools, power tools and electric soldering gun Lift and Carry up to 30lbs Able and willing to comply with Drug-Free Workplace policies and pass all related drug/alcohol screenings Able to perform complex mechanical and/or electromechanical assembly operation Capable of solving problems in situations that are atypical or infrequently occurring based on existing precedents or procedures Skilled at simple welding tasks and/or brazing, or soldering Ability to read and interpret company documents, such as safety rules, operating/manufacturing instructions, policies and procedures Experience with MS Office Suite Good manual dexterity required to work with small parts Approximately 90% sitting and 10% standing/walking about in-door Company facilities Use head and neck in static position, looking up/down and side-to-side Perform major hand grasping and fine finger manipulations using both hands Assembler - Perform light lifting from floor, table and shelf Push and pull carts or mobile tables, loaded and unloaded Minimal: heavy lifting from floor or higher, bending, twisting, climbing, lifting arms above shoulders, kneeling, exposure to excessive noise, hazardous chemicals, hazardous equipment, uneven walking surfaces Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.Company DescriptionNESCO Resource Company Overview Established in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers. Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job Description Job Title: Manufacturing Maintenance Engineer- Flexible Packaging Location: Onsite- Tucson, AZ Company Overview: We are a leading company in the flexible packaging manufacturing industry, providing innovative solutions to the Consumer-Packaged Goods (CPG) and Fast-Moving Consumer Goods (FMCG) sectors. We specialize in high-quality packaging materials and are committed to operational excellence, product quality, and customer satisfaction. Position Summary: We are seeking an experienced and highly motivated Manufacturing Maintenance Engineer to join our team in overseeing the maintenance department within our flexible packaging manufacturing operations. This role will require a strong background in industrial engineering, with an emphasis on PM scheduling, project management, inventory management, troubleshooting and equipment assessment. The Manufacturing Engineer will work closely with various departments to ensure the smooth operation of manufacturing processes, particularly with a focus on automation machinery. Key Responsibilities: • Lead and manage the maintenance department, ensuring equipment reliability and minimizing downtime., • Oversee the implementation and scheduling of preventative maintenance (PM) programs to ensure optimal performance of machinery, particularly automated systems., • Develop and execute strategies for inventory management, assessment, and resource allocation., • Research components of industrial motion control, RFQ and purchase for repairs or upgrades., • Collaborate with cross-functional teams to improve processes and resolve technical issues in manufacturing operations and machinery., • Maintain and improve operational performance within the flexible packaging manufacturing environment., • Apply leadership and organizational skills to effectively manage staff, schedules, and resources., • Drive improvements in maintenance efficiency, machinery uptime, and cost control., • Support the development and implementation of engineering solutions in automation, machinery, and processes., • Ensure compliance with health, safety, and environmental standards in all engineering activities., • Prepare reports and analysis of department performance, identifying areas for improvement and implementing corrective actions., • Support and lead continuous improvement initiatives within the plant., • Project Management Preferred Qualifications: • Bachelor’s degree in Industrial, Systems, Mechanical, or Electrical Engineering, or a related field., • 5-8 years of professional experience in manufacturing engineering preferably in the flexible packaging or related manufacturing industry (food & beverage)., • Proven experience with PM scheduling, troubleshooting and repairing machinery in a manufacturing environment., • Strong technical expertise in industrial automation repair and troubleshooting., • Experience working within the Consumer-Packaged Goods (CPG) or Fast-Moving Consumer Goods (FMCG) production facility is highly desirable., • Exceptional leadership and organizational skills with a track record of managing teams effectively., • Excellent communication and interpersonal skills, with the ability to collaborate across departments., • Strong problem-solving skills and the ability to think strategically while driving continuous improvement., • Experience with ERP systems and maintenance management software., • Industrial Automation background., • Ability to manage budgets and cost control for engineering projects., • Knowledge of safety and regulatory requirements in manufacturing (SQF, GMP, OSHA Safety, etc.), • Experience with machinery OEM’s, Uteco, DCM, ATN, Totani and Nordmeccanica.

Job Description Our client, a world leader in diagnostics and life sciences, is looking for a "Engineering Systems Specialist” based out of Tucson, AZ Job Duration: Long term Contract (Possibility Of Further Extension) We are seeking a highly motivated Design Engineer to join our team. The ideal candidate will apply advanced knowledge of engineering design principles and practices to develop, test, and optimize complex systems. This role involves concept generation, design validation, system integration, and performance testing against specifications. The engineer will also support manufacturing process development, troubleshoot technical issues, and contribute to continuous improvement initiatives. Key Responsibilities: • Develop and evaluate design concepts, ensuring compliance with performance, quality, and reliability standards., • Participate in design and technical reviews, providing insights and recommendations., • Conduct testing, validation, and reliability assessments for product and system performance., • Collaborate cross-functionally to identify root causes of issues and propose engineering solutions., • Support the development and optimization of manufacturing processes., • Review and analyze technical data, ensuring accuracy and completeness., • Contribute to patentable inventions and innovation initiatives., • Present and discuss technical data within the engineering team., • Promote a “Quality First Time” culture across all project activities., • Perform other engineering duties as assigned. Required Skills and Qualifications: • Solid understanding of fundamental and some specialized engineering concepts., • Experience in system integration and lab-based equipment testing (hands-on experience preferred)., • Proficiency with MS Office Suite (Word, Excel, PowerPoint) and other technical documentation tools., • Bachelor’s degree in Engineering (Mechanical, Electrical, or related discipline)., • 0–3 years of relevant experience in design, testing, or system integration preferred. Company Benefits: Medical, Dental, Vision, Paid Sick leave, 401K If interested, please send us your updated resume at /

Job Description Why Join Rincon Research Corporation (RRC)? At Rincon Research Corporation, our primary business is innovating, developing, and fielding digital signal processing (DSP) products and services for the United States Defense and Intelligence Communities in support of national security. Rincon Research Corporation seeks a DSP Engineer to create cutting edge solutions to challenging national security and defense signal processing, geolocation, and communication problems. You will work in a multi-disciplinary R&D environment with similarly skilled and motivated electrical engineers, mathematicians, and computer scientists/engineers in a highly rewarding personal and professional environment. Come join the team that is creating cutting edge signal processing, geolocation, and communication systems for the future! What are the primary responsibilities in the Sr. DSP Engineer position? Core responsibilities include leading the design and implementation of digital signal processing systems for communication signals, radar signals, and other applications. This includes developing, deploying, maintaining, and testing software-based solutions. System development can include algorithm design, data analysis, hardware control, computational optimization, RF system modeling, field testing, error budget analysis, operational performance analysis, writing efficient software, testing with real data, and providing applications to front-line customer facilities. A key responsibility is staying up-to-date with the signal processing technologies, tools, and methodologies and experimenting with new technologies to incorporate innovative solutions into RRC projects. RRC personnel can expect to work across all functional areas: systems engineering, development, integration and test, deployment and O&M, and experience the direct mission feedback from the customer and seeing your project provide real-world contributions that make a significant difference. You’re encouraged and expected to propose things that you believe will improve the applications and frameworks you’re working in. The ability to work unsupervised with minimal direction and the ability to self-start is a must. What required background will make you successful? • Degree (Bachelor's, Master's, or PhD) in Electrical Engineering, Applied Mathematics, or other equivalent field, • At least 15 years' experience in a signal processing engineering-related discipline, • Subject matter expert in DSP, including deep knowledge of DSP theory and a track record of successful system development, • Experience as a project technical lead and/or principle investigator, • Experience mentoring other engineers and providing technical advice to program management, • Proficient in C++ and/or Python in LINUX environments, • Ability to obtain and maintain TS/SCI security clearance, • US CITIZENSHIP REQUIRED Preferred background: • Cellular communications, satellite communications, modern modulation schemes, cyclostationary techniques, • Geolocation, radar signal processing, RF propagation and link budgets, RF system design, • DevOps and Cloud computing Experience (Gitlab, CI/CD, CVE mitigations, Docker, Kubernetes, PIP), • Experience as technical lead on proposal efforts, • Current TS/SCI clearance Where is the position located? This position is located at our Tucson, AZ Headquarters. Remote work/telework is not available for this position. What benefits does RRC offer? • 100% employer-paid premiums for family medical and dental insurance, employee life insurance, short-term and long-term disability (STD & LTD), • Flexible reimbursement spending accounts for medical expense and dependent care, • Immediate participation and vesting in the company’s Employee Stock Ownership Plan (ESOP) and 401(k) Plan, • Employer contributions to RRC’s ESOP, • Employer matching contributions to the company’s 401( k) Plan

Job Description Electrical Engineer (Analog & Mixed-Signal Design)- $80k to $110k + Benefits– Tucson, AZ The Role Do you have hands-on experience in analog and mixed-signal circuit design? Are you looking for a role where your designs move from concept to production under one roof? If so, we have an exciting opportunity for you. Dataforth Corporation is seeking an Electrical Engineer to join our engineering team in Tucson, AZ. This is a hands-on position where you will design, develop and support high-reliability signal conditioning and data acquisition products used worldwide. You will play a key role in the full product lifecycle, from concept and prototyping to manufacturing and field support. If you are ready to take on a challenging and rewarding engineering role where your designs truly make an impact, we encourage you to apply today. Key Responsibilities: • Design analog circuits involving operational amplifiers, filters, power supplies, and isolation methods., • Implement mixed-signal designs using A/D and D/A converters., • Contribute to system-level product design including packaging and interconnects., • Ensure compliance with EMC and hazardous location standards., • Build, test, and characterize prototypes for performance validation., • Manage assigned projects with ownership and accountability. Dataforth was established in 1984 to provide signal conditioning, data acquisition, and data communication solutions to the ever-enlarging factory automation markets. The original entrepreneurial venture was spawned by the Burr-Brown Corporation, an international leader in analog integrated circuits and related products and now part of Texas Instruments, Inc. Today, Dataforth is a worldwide innovator of signal conditioning, data acquisition, and data communication products. It maintains a positive revenue growth and delivers a steady introduction of new products offering customers high quality solutions for their industrial applications. The Benefits • Work-Life Balance: Enjoy flexible work hours in a supportive, team-oriented environment., • Invest in Your Future: Benefit from profit sharing, a 401k plan with company match, and tuition reimbursement., • Comprehensive Benefits: Access competitive medical, dental, and vision insurance., • Bachelor’s degree in Electrical Engineering (BSEE) or a closely related field., • 2+ years of hands-on experience in electrical engineering, with a strong focus on analog, mixed-signal, and power circuit design and analysis., • Proven ability to analyze complex circuits and troubleshoot effectively., • Proficiency with standard laboratory instruments (oscilloscopes, multimeters, spectrum analyzers, etc.)., • Excellent communication and collaboration skills., • Master’s degree in Electrical Engineering (MSEE) with a specialization in analog/mixed-signal circuits. (Preferred), • Experience designing for EMC compliance and/or hazardous locations. (Preferred), • Familiarity with PCB layout considerations for high-performance circuits. (Preferred)

Job Description Description: Temp to hire assignment - 3 mos to 1 year Pay Rate Range: $42.31 - $50.00 / hour, (depending on experience). Will negotiate higher pay with right candidate. 1st Shift Sr. Mechanical Engineer (Engineer III) Position Summary The Mechanical department provides Mechanical Engineering expertise for all phases of product development, from design through production. Applies expertise in Mechanical Engineering in various aspects of the development of electronic components for aerospace applications. For Engineering, the Senior Mechanical Engineer provides this expertise to development and sustaining projects: addressing design of mechanical packaging for electronics, mechanical analysis, design and qualification testing, and creation of design and program documentation. Responsibilities • Advanced knowledge of FEA structural analysis and thermal analysis tools, • Keep current with state-of-the-art techniques for electronics packaging and material technology and processes as may be required by Parker Meggitt, • Outside interface for Parker Meggitt mechanical technology and customer requirements, as well as providing subject matter expertise, • Consistent exercise of independent judgment and discretion in matters of significance, • Design to mechanical requirements, • Solves technical problems using a combination of experience, judgment, and precedents, • Prepares a range of reports by collecting, analyzing, and summarizing information, • Communicates complex technical information to others in a clear and effective manner, • Uses discretion and independent judgment when evaluating courses of action; makes decisions after considering various options, • Keep current with state-of-the-art techniques for electronics packaging and material technology and processes as Parker Meggitt may require, • Outside interface for Parker Meggitt electrical technology and customer requirements as well as providing subject matter expertise, • Lead technical support and guidance to Development Engineering in terms of design reviews, dFMEAs, pFMEAs, and associated risk management activities, • Train and coach lower-level mechanical engineers, • Execute engineering strategy for the Tucson site, • Lead process improvements related to mechanical engineering expertise, • Other responsibilities as assigned, • Regular, consistent and punctual attendance is required. May need to work nights and weekends, variable schedule(s) and additional hours as necessary Physical Requirements • Approximately 80% sitting and 20% standing/walking about in-door Company facilities., • Lift and Carry up to 35 lbs., • Use head and neck in static position, looking up/down and side-to-side., • Perform light lifting from floor, table and shelf., • Push and pull carts or mobile tables, loaded and unloaded., • Minimal: heavy lifting from floor or higher, bending, twisting, climbing, lifting arms above shoulders, kneeling., • Minimal: exposure to excessive noise, hazardous chemicals, hazardous equipment, uneven walking surfaces, • Typing with computer and keyboard Qualifications • Advanced knowledge of Mechanical Engineering, • Proficient in 3D CAD, preferably SolidWorks, • Proficient in Finite Element Analysis (FEA), preferably ANSYS, • Ability to apply a systematic and analytical approach to problem solving, • Effective interpersonal, verbal and written communication skills to drive tasks to completion, • Ability to explain a range of technical information, • Excellent communicator – can sell concepts to people at all levels in the organization, including engineers., • Flexible and adaptable to change, • Assets: Knowledge of DO-160, DO-178, DO-254, ARP, • Proficient computer skills (Word, Excel, PowerPoint), • Proficient organizational skills and the ability to prioritize according to urgency while remaining flexible to changing situations, • Self-motivated, • Detail-oriented, • Able to manage multiple, concurrent priorities Education & Experience Education: Bachelor’s degree in Mechanical Engineering or Aerospace Engineering Certifications: None Required Years of Experience: 8 years of relevant experience

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. PRINCIPAL ELECTRICAL ENGINEER TS/SCI Rocket Lab's Optical Systems division solves mission-critical space domain and ISR challenges for DOD, IC, and commercial customers. Our vision is to revolutionize the space-based payload market with innovative and novel designs for space, terrestrial, and airborne environments. As a Principal Electrical Engineer TS/SCI based at Rocket Lab's site in Tucson, AZ, you will have the opportunity to support the utilization, career growth, and well-being of engineers in the Electrical Engineering functional group in addition to supporting programs as an individual contributor (approximately 80% individual contributor support and 20% functional management). An ideal applicant will possess a strong technical background in electrical engineering in addition to excellent leadership skills. With the support of the broader team, they will deliver fully validated systems that meet program specifications on cost, schedule, and quality targets. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! WHAT YOU'LL GET TO DO: Duties and Responsibilities • Team Leadership: Manage and lead a team of electrical engineers by fostering a collaborative and high-performance work environment. Set clear objectives, provide regular feedback, and support the professional development of team members. Develop a professional engineering team culture to meet deadlines and uphold personal accountability., • Functional Budgeting: Manage the functional budget, generate ROI assessments for discretionary efforts such as process improvements or tool development, and control overhead charging rates to specified levels., • Technical Guidance: Provide expert guidance and mentorship to the electrical engineering team by offering insights and solutions to complex technical challenges. Stay updated with the latest advancements in electrical engineering technology and guide the team in adopting best practices and innovative approaches. Act as core assessor in engineering gate reviews and peer review events to ensure work quality and task closure., • Electrical Design and Analysis: Lead and participate in the design, analysis, and optimization of electrical systems for space applications. Use software tools, simulations, and analytical techniques to assess electrical design performance, and quality, power management, impedance matching, as well as digital, high frequency and nodal analysis. Determine the architecture and lead the detailed electronics analysis and design using both digital and analog circuit design skills., • Collaboration: Collaborate closely with cross-functional teams, including mechanical engineers, optical engineers, and systems engineers to ensure seamless integration of electrical systems into satellite platforms. Foster effective communication and teamwork across departments., • Documentation, Reporting, and Writing: Prepare technical reports, project documentation, technical proposals, and presentations to communicate progress, findings, and recommendations to internal stakeholders and external partners., • Mission Assurance: Implement and support rigorous quality control measures throughout the electrical engineering process to ensure compliance with industry standards and customer requirements., • Design for Manufacturing: Establish processes and design guidelines to support seamless handoff to production and long-term production scaling., • Metrics Tracking: Develop and measure a strong set of metrics for engineering development activities., • Risk Management: Identify and assess potential risks and challenges in electrical design and development projects. Develop mitigation strategies and contingency plans to minimize project disruptions and ensure successful outcomes. YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in electrical or computer engineering; or other engineering discipline, • 12+ years of electrical hardware experience, • An active U.S. Government Security Clearance and the ability to obtain a TS/SCI, • Demonstrable experience in electrical engineering, with a strong focus on designing and developing electrical systems for space applications to include all facets of electronics design including high level architectural development, low level design of high speed, analog and digital printed circuit boards that will include interfacing with different communications buses., • Extensive design experience in meeting rigid EMI/EMC guidelines, • Design experience with opto-electronics background in low-noise, high gain opto-electronic circuitry, electrical amplification, and various other optical diode detection components., • Design experience with ability to migrate from R&D to Full Scale Production within a well-regulated AS9100 (ISO 9001) environment including accurate schematic capture, BOM creation, thermal, and timing analysis., • Strong analytical and problem-solving skills, with the ability to assess complex electrical systems and propose effective solutions., • Excellent management skills, including the ability to prioritize tasks, manage resources, and deliver results within given constraints., • Demonstrated leadership skills with experience managing and mentoring technical teams., • Effective communication and interpersonal skills, with the ability to collaborate with multidisciplinary teams and present technical information to both technical and non-technical stakeholders THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Master's or PhD in electrical or computer engineering; or other engineering discipline, • Experience designing for space environments, including radiation impacts and mitigation, • Experience designing for high-reliability aerospace applications, • Demonstrated success working in a dynamic environment and ability to manage competing priorities ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionBenefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off Key Responsibilities: Develop and execute strategies for a cobot and automation product portfolio. Lead product lifecycle management, from introduction to end-of-life. Stay updated on industry trends, competitive landscapes, and emerging technologies. Lead the design and development of complete automation and cobot cells, including layout, process flow, and equipment selection. Create and maintain detailed Bills of Materials (BOMs) for automation projects; manage procurement of equipment, hardware, and software. Oversee installation and commissioning of automation systems, ensuring performance, quality, and safety standards are met. Integrate cobots with existing machinery, sensors, and software. Develop and maintain software interfaces for sensors, actuators, PLCs, HMIs, and related equipment. Debug and resolve hardware, software, and network issues. Perform advanced troubleshooting, preventive maintenance, and rapid issue resolution for equipment, tooling, and automation systems. Manage and execute multiple automation and cobot projects simultaneously, ensuring on-time, on-budget delivery. Develop and manage detailed project plans with clear roles, responsibilities, and timelines. Conduct simulation tests and system validations to refine integration processes. Collaborate with Production, Maintenance, Quality, Sales, Marketing, and Engineering teams to optimize workflows and support business goals. Build and lead cross-functional technical teams, including sales engineers, application engineers, and integrators. Develop training materials and provide hands-on training for operators, maintenance staff, and engineers on new automation and cobot systems. Support employees on cobot operation, troubleshooting, and maintenance. Ensure all automation and cobot systems meet OSHA, ISO, and ANSI/RIA safety standards. Perform risk assessments and configure safety-rated monitored stops, hand guiding, and speed/separation monitoring. Validate safety interlocks and maintain compliance with regulatory and company standards. Perform other responsibilities as deemed appropriate or necessary by management. Required Skills and Qualifications: Technical Skills: Bachelors or advanced degree in Robotics, Computer Engineering, Electrical Engineering, or related field preferred. 10 + years of experience in automation, programming, or related technical roles. Hands-on experience with cobots (collaborative robots) and FANUC industrial robots. Strong proficiency in robotics, embedded systems, C/C++, Python, and common communication protocols (e.g., OPC UA, ROS). Excellent debugging skills and the ability to troubleshoot complex hardware and software issues. Experience in automation cell design from concept through commissioning. Knowledge of safety standards for robotic and automated systems (ANSI/RIA, ISO). Ability to analyze data, understand process flows, and respond to process variations. Ability to create training programs and technical documentation tailored for operators and technicians. Demonstrated project management and problem-solving skills. Ability to work collaboratively across departments and communicate effectively with all levels of the organization. Highly organized, self-motivated, and capable of managing priorities under deadline pressure. Soft Skills: Strong written and verbal communication skills. Excellent attention to detail and a proactive, self-driven attitude. Capable of working independently and within a team environment. Adaptable to fast-paced, dynamic manufacturing settings. Physical Requirements: Ability to lift and carry items weighing up to 50 lbs. Requires intermittent standing, walking, sitting, and bending. Work performed in an automation/manufacturing setting with exposure to noise, chemicals, and machinery. Must be able to wear appropriate PPE (safety glasses, steel-toe boots, hearing protection, etc.).

Job Description Scope of Position The HVAC Engineer is responsible for performing skilled maintenance and repair work on the hotel’s heating, ventilation, air conditioning, and refrigeration systems, as well as assisting with general maintenance tasks to ensure a safe, comfortable, and well-maintained environment for guests and team members. Primary Responsibilities * Perform routine inspection, maintenance, and repair of HVAC systems, including air handlers, condensers, chillers, exhaust fans, and thermostatic controls. * Assist in maintaining and troubleshooting electrical and mechanical systems related to HVAC and general building operations. * Support the completion of the preventive maintenance program and repair work orders for guest rooms, public areas, and back-of-house facilities. * Conduct minor carpentry, painting, and plumbing repairs as needed to maintain hotel facilities in excellent condition. * Monitor and adjust building automation systems to ensure optimal performance and energy efficiency. * Maintain accurate records of maintenance work, equipment status, and refrigerant usage in compliance with regulatory standards. * Respond promptly and courteously to guest service requests and follow up to ensure satisfaction. * Ensure adherence to all safety policies, procedures, and regulatory requirements (EPA, OSHA, etc.). * Present a professional image through appearance, conduct, and communication. * Perform other duties as assigned by the Chief Engineer or management team. Qualifications Education & Experience: * High school diploma or equivalent required. * Technical or trade school certification in HVAC preferred. * EPA Universal Refrigerant Certification strongly preferred. * Minimum 2 years of experience in HVAC repair and maintenance, preferably in a hotel or commercial building environment. Skills & Abilities: * Strong troubleshooting and diagnostic skills for HVAC and mechanical systems. * Working knowledge of electrical, plumbing, and general building maintenance. * Ability to read and interpret technical manuals and wiring diagrams. * Excellent communication and customer service skills. * Ability to work independently with minimal supervision. Schedule * 8-hour shifts, flexible availability required (including weekends or holidays as needed). Benefits * 401(k) with matching * Health, Dental, and Vision Insurance * Life Insurance * Employee Assistance Program * Employee Discounts * Tuition Reimbursement * Referral Program

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR MACHINE LEARNING ENGINEER I Rocket Lab's Optical Systems division solves mission-critical space domain and Intelligence, Surveillance, and Reconnaissance (ISR) challenges for Department of Defense (DoD) and Intelligence Community (IC) customers. Our vision is to revolutionize the space-based payload market with innovative and novel designs for space, terrestrial, and airborne environments. Building on more than 20 years of electro-optical and infrared systems innovation from Geost, Optical Systems delivers solutions to the warfighter for responsive, scalable sensing solutions across all orbital domains. As a Senior Machine Learning Engineer I based at our Optical Systems site in Tucson, AZ, you will have the opportunity to collaborate with researchers on high-impact ML, AI, and computer vision projects. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! WHAT YOU'LL GET TO DO: • Collaborate with researchers on projects related to machine learning, artificial intelligence, and computer vision, • Perform rapid prototyping and enhanced development to be integrated into operational systems, • Contribute your strong programming ability and experience to develop robust solutions for real-world problems, • Validate, optimize, and deploy advanced exploitation algorithms, • Perform troubleshooting, bug fixes, and maintenance of existing and new code to ensure stability and robustness., • Perform other duties as assigned, • Ability to support travel or off-site work, as needed YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in computer science, electrical or computer engineering, mechanical engineering, physics, or other field, • 5+ years of software experience, • Active TS/SCI U.S. Government Security Clearance, • Proficiency in Python, • Experience with deep learning libraries (PyTorch, TensorFlow, etc.), • Strong background in both classical and modern (deep learning) machine learning including model selection, architecting, training, validation, testing, and deployment, • Understanding of a variety of machine learning tasks, e.g. Object Detection, Segmentation, Re-Identification, Tracking, Super Resolution, • Ability to apply modern AI approaches to solve real-world problems THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Machine learning experience with imagery or 3-D data, • Master's degree or PhD in computer science, electrical or computer engineering, mechanical engineering, physics, or other science or engineering field, • Classical machine learning methods, • Experience with AWS, docker, Agile development, • Experience curating quality, real-world datasets for training deep learning models, • Proficiency in C++, MATLAB ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job Description ABOUT ROCKET LAB Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more – all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. SPACE SYSTEMS At Rocket Lab, we're not just launching rockets — we're building the future of space. Our Space Systems team builds everything from complete spacecraft, precision payloads to the components and subsystems that allow them to thrive in space, like solar panels, flight software, star trackers, optical systems, separation systems, radios, and more. Our Space Systems team has enabled more than 1,700 missions, ranging from interplanetary exploration, in-space manufacturing to national security and defense initiatives. The team has built spacecraft, payloads, and components for missions to the Moon and Mars, working with partners including NASA, the Space Development Agency, and the U.S. Space Force. Whether it's a single high-performance spacecraft, constellation, or the vertically integrated components that help them get to space — our world class Space Systems team is empowering some of the boldest and most ambitious space missions. SENIOR ELECTRICAL ENGINEER II Rocket Lab's Optical Systems division solves mission-critical space domain and Intelligence, Surveillance, and Reconnaissance (ISR) challenges for Department of Defense (DoD) and Intelligence Community (IC) customers. Our vision is to revolutionize the space-based payload market with innovative and novel designs for space, terrestrial, and airborne environments. Building on more than 20 years of electro-optical and infrared systems innovation from Geost, Optical Systems delivers solutions to the warfighter for responsive, scalable sensing solutions across all orbital domains. As a Senior Electrical Engineer II based at our Optical Systems site in Tucson, AZ, you will have the opportunity to build hardware for ground systems (fixed), vehicles (mobile), and spacecraft. To be successful in this role, you must possess experience in the design, fabrication, and test of electronics to support imaging systems, sensors, lasers, optical communication, and embedded processors. Familiarity with modern design tools is a must. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space! WHAT YOU'LL GET TO DO: • Produce electrical concepts and designs for a wide variety of hardware and projects, • Work with fabrication shops and vendors to complete fabrication of designs, • See designs through to successful integration and test, • Show excellent investigative and trouble-shooting skills to assess issues and develop resolutions in the lab and in the field, • Work proactively to complete tasks with some modest direction, • Communicate effectively with project management, customers, and team members across disciplines, • Attend technical interchange meetings with the team members and other project personnel and represent the organization in matters pertaining to project development, • Provide status on assigned tasks and program schedules, • Provide document review and resolve technical engineering and integration issues, • Must have the ability to manage time and resources to meet assigned deadlines, • Support travel or off-site work as needed, • Perform other duties as assigned YOU'LL BRING THESE QUALIFICATIONS: • Bachelor's degree in electrical engineering or other technical discipline, • 8 years of engineering experience, • Active U.S. Government Security Clearance; or the ability to obtain a Clearance, • Demonstrable experience in electrical engineering, with a strong focus on designing and developing electrical systems for space applications to include all facets of electronics design including high level architectural development, low level design of high speed, analog and digital printed circuit boards that will include interfacing with different communications buses, • Extensive experience in the design of RF/analog building blocks like Low Noise amplifiers, mixers, Power Amplifier, Phase shifters, multipliers, LO distribution amplifiers, mixed-signal circuits, and mixed-signal systems such as ADC's DACs, and PLL's, • Extensive design experience in meeting rigid EMI/EMC guidelines, • Design experience with opto-electronics background in low-noise, high gain opto-electronic circuitry, electrical amplification, and various other optical diode detection components, • Design experience with ability to migrate from R&D to Full Scale Production within a well-regulated AS9100 (ISO 9001) environment including accurate schematic capture, BOM creation, thermal, and timing analysis THESE QUALIFICATIONS WOULD BE NICE TO HAVE: • Current SSBI clearance, • Strong analytical and problem-solving skills, with the ability to assess complex electrical systems and propose effective solutions, • Excellent management skills, including the ability to prioritize tasks, manage resources, and deliver results within given constraints, • Demonstrated leadership skills with experience managing and mentoring technical teams, • Effective communication and interpersonal skills, with the ability to collaborate with multidisciplinary teams and present technical information to both technical and non-technical stakeholders ADDITIONAL REQUIREMENTS: • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to focus, • Regularly required to sit, use hands and fingers, operate computer keyboard and controls, and communicate verbally and in writing, • Must be physically able to commute to buildings, • Occasional exposure to dust, fumes and moderate levels of noise WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

Job DescriptionElectrical Engineer Tucson, AZ Company OverviewWorld View is on a mission to inspire, create, and explore new perspectives for a radically improved future by helping humanity respect and conserve all life on Earth. As a leader in the burgeoning stratospheric exploration space, we have been leading groundbreaking stratospheric flight for over 10 years. Using advanced stratospheric balloon technology, our stratospheric remote sensing capabilities are trusted by NASA, NOAA and other government and commercial enterprises. And, with our space tourism and exploration business promising a truly unique space tourism experience unlike anything else on the market, World View is poised for massive growth. To learn more about World View, visit . Job DescriptionAt World View we are seeking a highly skilled and innovative Electrical Engineer/Designer with knowledge in electrical engineering principles to join our dynamic team. The ideal candidate will be responsible for developing avionics systems, power systems, and communication systems based on a single board computer architecture, such as Raspberry Pi. This role demands a fast-paced approach to design, from concept to implementation, with an emphasis on out-of-the-box thinking and the operationalization of off-the-shelf components for use in high-altitude environments. Role Responsibilities· Design and development of complex electrical systems for avionics applications, ensuring simplicity and modularity. · Rapidly conceptualize, design, and prototype innovative, out of the box solutions for avionics systems, power systems and communication systems based on single board computer architectures. · Employ advanced circuit design and power system knowledge to create and enhance electrical devices capable of operating in the stratosphere. · Demonstrate analytical prowess in solving unconventional engineering problems, designing experiments, and analyzing intricate data sets. · Innovate and push the boundaries of electrical engineering, developing cutting-edge systems and fostering a culture of creativity. · Provide expertise in complex circuit analysis and predict circuit behavior under challenging conditions. · Document designs thoroughly, write detailed test plans and procedures, and produce technical documentation that sets organizational standards. · Communicate complex technical ideas effectively to diverse audiences, including technical reporting and presentations. · Maintain an exceptional level of precision and attention to detail in all tasks, ensuring the highest standard of system performance and accuracy. · Lead and collaborate with project teams, integrating various disciplines and mentoring others in teamwork and collaboration techniques. · Apply advanced theories and methods to design and analysis, guiding the team in problem-solving. Qualifications· Electrical Engineering degree or other technical degree with equivalent work experience · 3+ years of Electrical Engineering experience · Proficient with analog and digital circuit design, building, and testing circuits in a lab environment · Proven experience in advanced circuit design, power systems, and avionics systems. · Demonstrated experience with single board computer systems, such as Raspberry Pi, and the ability to ruggedize commercial off-the-shelf components for non-standard environments. · Strong background in technical writing and documentation. · Excellent communication and presentation skills. · Demonstrated ability to lead a team and work collaboratively. What We Offer· Work alongside experts in emerging technology· Full benefits including Medical, Dental, Vision, Life Insurance, etc.· Modern office with kitchen, exercise area, amazing views, and more! Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. World View is an Equal Opportunity Employer. This company does not discriminate in employment and personnel practices based on race, sex, age, handicap, religion, national origin or any other basis prohibited by applicable law. Hiring, transferring and promotion practices are performed without regard to the above listed items. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description It is your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career minded aviation professionals who will support our vision and goals. Built on a foundation of Respect, Safety, Quality, and Results, we are seeking a skilled and motivated Material Clerk to join our team. In this role, you’ll be responsible for managing and issuing stock inventory, coordinating with maintenance teams to forecast material needs, ensuring accurate records through data entry, and maintaining accountability for tools and consumables. You’ll also support inventory reduction initiatives and help keep our operations running smoothly. As a 24/7 operation, we have openings across all shifts—including standard day shifts, 2nd shift, weekend shifts, and 12-hour shifts. Candidates must be flexible and willing to be assigned to any shift based on operational needs. DUTIES/RESPONSIBILITIES: • Issues and controls stock inventory and evaluate stock for surplus., • Coordinates with Maintenance Department to forecast material requirements., • Checks stock availability on all maintenance material requests., • Orders stock and restocks shelves., • Monitors shelf life of applicable stock., • Maintains, monitors and restocks bench stock., • Stocks and issues consumables., • Maintains, issues, and repairs small tools., • Processes turn-ins from Maintenance Department., • Performs data entry of issues and turn-ins., • Maintains accountability on permanently issued tools., • Conducts periodic and annual inventories., • Serves as a member of the inventory reduction team., • Answer phones, order tools, and maintain first aid and safety supplies, • Conduct safety program, assist with hazardous materials, and ensure safe work practices, • 401K with company match, • Medical/Dental/Vision Insurance, • Disability, • PTO, • Life and Accidental Death Insurance, • Development and Career Growth Opportunities, • EAP REQUIRED SKILLS/ABILITIES: • Valid Driver’s License required, • Capable of working independently or under supervision., • Flexibility to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Strong organizational and planning skills with the ability to adhere to deadlines., • Excellent attention to detail and mathematical proficiency., • Proficient in interpreting and applying technical data relevant to the position. EDUCATION AND EXPERIENCE: Minimum Qualifications: • High School diploma or equivalent., • Ability to read, write, and understand English, including following verbal and written instructions., • One year of inventory experience preferred. PHYSICAL REQUIREMENTS: Requires sitting, standing or walking for extended periods of time. Requires frequent walking, climbing and lifting, bending, reaching to shoulder level, carrying, pushing or pulling weight up to 50 pounds. Requires eye-hand coordination and manual dexterity. Requires corrected vision and hearing to normal range. WORKING CONDITIONS: • Aircraft maintenance hangar, and Avionics Shop., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Additional duties may be assigned at the discretion of department management. SMS REQUIREMENTS • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly., • Any employee who observes an unsafe action or condition should bring it to the attention of supervisors and managers. Certain conditions may allow the employee to easily correct a condition or situation., • In all cases, the employee must notify his/her supervisor of any actions taken by the employee. The first employee to observe an accident or incident should take immediate action to alert appropriate responders/supervision and to take reasonable steps to prevent further injury, or damage. Duties not listed within the position description may be required of the employee at the discretion of the department management. Job functions may vary due to irregular working conditions or multiple shift positions. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodations for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodations during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

Job Description It’s your career, give it wings! Who we are and where we are going: Ascent Aviation Services is one of the largest aviation maintenance, repair, overhaul, storage and reclamation operations in the world. Our strength comes from our talented and professional employees who excel through teamwork and enthusiasm. Ascent Aviation Services continues to grow and are continually looking for motivated and career minded aviation professionals who will support our vision and goals. Elevate your career as a QC Supervisor with Ascent Aviation Services, where you'll play a critical role in ensuring the safety, precision, and airworthiness of world-class aircraft. Lead a team of skilled inspectors, oversee high-impact inspections, and collaborate directly with customers and regulatory agencies in a fast-paced, high-tech environment. If you're ready to take charge, drive excellence, and make your mark in aviation, this is your runway to success. As a 24/7 operation, we have openings across all shifts, including days, evenings, weekends, and 12-hour schedules. Candidates must be flexible and willing to work any shift based on operational needs. Some schedules may qualify for shift differential. Overtime—both scheduled and unscheduled, including holidays—may also be required. DUTIES/RESPONSIBILITIES: • Research technical data and performs aircraft inspections, flightline operations, and shop work in accordance with applicable maintenance manuals, FAA regulations, and Ascent Aviation policies and procedures., • Inspects parts and materials used in the maintenance, modification, and configuration of aircraft and equipment to ensure compliance with quality standards, allowable tolerances, and manufacturer specifications., • Records inspection data on forms, reports, and inspection tags. Reports any irregularities to the Lead Inspector that could cause injury or compromise aircraft safety., • Ensures that all maintenance records are completed accurately and thoroughly., • Verifies that Required Inspection Items (RIIs) are properly identified on all work cards, in accordance with customer requirements., • Ensures that all Work-In-Progress Conformity Records are accurately documented for the assigned shift., • Performs receiving inspections as required., • Tests the tightness of airframe connections using hand tools and inspects part fitment using flashlights and mirrors., • Examines the assembly, installation, and adjustment of ailerons and rudders to ensure compliance with accepted standards and regulatory requirements., • Verifies the accuracy of component installations in powerplant and hydraulic systems using precision tools such as protractors, micrometers, calipers, and gauges., • Signs inspection tags to approve units or records the reason for rejection., • Ensures the complete and accurate completion of all required forms, reports, and records (e.g., FAA Form 337, FAA Form 8130-3, SDR, ect.), • Enforces all Safety and Quality policies and procedures., • Conducts facility audits to ensure safety and policy compliance., • Coordinates with customer representatives as needed., • Assumes the duties of the Chief Inspector or Lead Inspector in their absence., • Assists the Chief Inspector with the training and development of Receiving Inspectors, Aircraft Inspectors, and NDT inspectors., • Ensures proper documentation of training is recorded and signed by the appropriate Lead, Supervisor, or Manager., • Performs maintenance duties at off-site locations when assigned to temporary duty., • Conducts general maintenance of company equipment and housekeeping tasks. YOU WILL GET MORE THAN JUST COMPENSATION: • 401K with company match, • Medical/Dental/Vision Insurance, • Disability, • PTO, • Life and Accidental Death Insurance, • Development and Career Growth Opportunities, • Strong organizational skills with the ability to manage workload and meet deadlines., • Excellent attention to detail., • Ability to read, write, and understand the English language., • Proficiency with computer systems, maintenance documentation systems, and Federal Aviation Regulations., • Ability to inspect and evaluate mechanical components with precision instruments., • Strong communication skills and ability to work effectively in a team setting., • Minimum of 5 years of experience in aircraft inspections required., • Valid Airframe & Powerplant (A&P) License required., • High school diploma or equivalent strongly preferred., • Additional technical training or a bachelor's degree in aviation maintenance or a related field is preferred. PHYSICAL REQUIREMENTS: • Ability to sit, stand, and walk for extended periods of time., • Frequent bending, stooping, squatting, crouching, kneeling, balancing, and reaching above shoulder level., • Occasional crawling, climbing, lifting, carrying, pushing, or pulling up to 50 lbs. unassisted., • Requires eye-hand coordination and manual dexterity., • Corrected vision and hearing to normal range. EQUIPMENT OPERATED: • Precision measuring instruments: micrometers, calipers, gauges, and protractors., • Standard hand tools for aircraft maintenance and inspection., • Computer systems and software used for documentation and regulatory compliance., • Personal protective equipment (PPE): goggles, safety glasses, face shields, ear protection, aprons, gloves, safety harnesses, and breathing apparatus. WORKING CONDITIONS: • Primary work locations include aircraft maintenance hangars, flightline areas, and the Avionics Shop., • Exposure to potential hazards, including: high-intensity noise levels, extreme temperature variations, electrical currents and radar waves, hazardous materials (per Safety Data Sheets), and moving machinery and aircraft components., • Must use personal protective equipment (PPE) at all times., • Work may be performed on multiple shifts, including nights, weekends, and holidays., • May be required to work at both Marana, AZ and Tucson, AZ locations as business needs dictate., • Additional duties may be assigned at the discretion of department management. SMS REQUIREMENTS: • Employees are responsible for performing their duties in accordance with company policies and government regulations. These rules are written in the interest of preserving the lives and the resources entrusted to each employee, and when the rules are violated, the risk of a mishap is usually increased., • Employees shall participate in safety education programs and train to recognize hazards on the job and how to report them promptly. As a condition of employment, each member of Ascent Aviation agrees to report errors, incidents, and accidents honestly. Ascent Aviation Services is dedicated to fostering an inclusive work environment. We provide equal employment opportunities and are committed to making reasonable accommodations for qualified individuals with disabilities to enable them to perform the essential functions of their job. If you require any accommodations during the application or interview process, please let us know. EEO/AA/F/M/VET/DIS

Job DescriptionPosition DescriptionPay rate: $20/hour Mineral Processing Laboratory Technician:The primary responsibilities of a mineral processing laboratory technician are to carry out the tasks assigned to him/her by the Metallurgical Engineer, Sr Metallurgical Technician, or the designated supervisor, safely and efficiently. These tasks are varied, and you will be trained for each specific task you will be asked to perform.The following list includes most of the tasks that are to be performed by the Metallurgical Laboratory Technician. Most of these tasks will have a written procedure and will be preceded by training prior to starting any task.Essential Job Functions may include the following or other duties as assigned: • Sample Receipt and inventory Weigh and record, • Lab ID and sample labeling, • Sample Preparation, • Crushing, • Jaw Crusher Roll Crusher, • Blending, • Table roll cloth Floor roll cloth Riffle, • Pug Mill, • Cone and Quarter Splitting, • Riffle, • Large Rotary Small Rotary Roll cloth, • Screening, • Wet Screen – Sweco Wet Screen – 8” Dry Screen - Gilson Dry Screen – Sweco, • Dry Screen – Ro-Tap, • Assist Sr. Metallurgical Technician or Engineer Flotation Assistant, • Grinding in rod mill Pressure filter samples Vacuum Filter samples Decant, • Titration, • Maintain laboratory instrumentation and equipment., • Assist with/perform routine chemical and/or metallurgical analysis., • Handle various chemical reagents safely., • Dispose of all residues in a safe and prescribed manner., • Monitor multiple assays at once., • Collect and report results accurately., • Assist others as requested or assigned., • Perform related duties as required.Requirements / QualificationsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Minimum Education: HS Diploma/GED, • Prior analytical laboratory, chemistry, core handling or mining experience preferred but not required., • Must be able to utilize basic math skills to calculate dilution factors and solution concentrations quickly and accurately., • Must have effective communication skills, as well as interpersonal, problem solving and basic math skills to perform routine calculations and recognize, correct and inform others when quality control is out of range., • Must be able to work independently with minimal supervision while maintaining the highest level of quality assurance and compliance., • Must be able to follow directions completely, accurately and consistently., • Must have strong organizational and documentation skills., • Must be proficient in the use of Microsoft Excel to develop and maintain spreadsheets reports, and other documentation., • Must be able to interact successfully with all levels of staff, clients and vendors., • Must be able to develop and maintain awareness of occupational hazards and safety precautions., • Must have reliable transportation to and from the jobsite., • Required Availability: Primarily Monday through Friday; however, some evenings, weekends, holidays and overtime may be required., • Able to successfully complete Reference Check, Background Check, Drug Screen and Respirator Clearance Physical.Physical DemandsThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Constant (more than 66% of time): Lifting/Carrying 11-20 lbs., Pushing/Pulling 11-20 lbs., Seeing (trades, mechanical, general), Hearing, Talking, Repetitive Motion – Hands, Feeling (temperature, texture, etc.), Fingering (pinching, typing, etc.), Grasping, Standing, Twisting / Turning, Reaching., • Frequent (34% - 66% of time): Lifting/Carrying 21-50 lbs., Pushing/Pulling 21-50 lbs., Seeing (computer, reading), Walking – Even Surfaces, Balancing., • Occasional (1% - 33% of time): Seeing (at night or low lighting), Walking – Uneven Surfaces, Stooping, Sitting.EnvironmentInside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. Noise: There is sufficient noise to cause worker to shout in order to be heard above the ambient noise level. Vibration: Exposure to oscillating movements of extremities or whole body. Atmospheric conditions: One or more of the following conditions that affect the respiratory system of the skin: Fumes, odors, dusts, mists, gases or poor ventilation. Oils: There is air and/or skin exposure to oils and other cutting fluids. Hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker is required to wear a respirator. Disclaimer: Although Geotemps, Inc. has attempted to accurately and thoroughly describe this position, Geotemps, Inc. reserves the right to change the same, including to change, add to or subtract from the duties outlined, within the sole discretion of Geotemps, Inc., at any time, with or without advanced notice. Employment at Geotemps, Inc. is at-will and may be terminated at the will of either Geotemps, Inc. or the employee, at any time, with or without cause or notice. The at-will nature of the employment relationship also gives Geotemps, Inc. the right to make changes to its benefits, policies, and procedures, as well as employee compensation, generally without employee consent or notice, unless otherwise required by law. The at-will employment status of each employee cannot be altered by any verbal agreement or alleged verbal agreement. It can only be changed by a legally binding, written contract covering employment status.

Job Description Formed in 1988, Cal-Am Properties, Inc. is one of the largest privately held operators of RV resorts, manufactured home communities and apartment communities in the United States. Through teamwork and dedication, our staff are valued as an important component to our total success. Everyone at Cal-Am is continually working today for tomorrow’s lifestyle ensuring those we serve have an unparalleled experience of the highest quality. MAINTENANCE SUPERVISOR The Maintenance Technician performs repairs and routine preventative maintenance to mechanical equipment, utility systems, structures and grounds including electrical, plumbing, and HVAC repairs. This qualified individual supervises the maintenance, landscaping, and housekeeping staff to maintain all common areas of the community. They performs various maintenance duties necessary to maintain and enhance the value of the community. They work as a team participant along with the maintenance staff to ensure the community meets the quality maintenance standards set by the Company. Additionally, they interact with residents and staff with a professional, courteous manner and positive attitude. Our standard schedule is Monday through Friday, but occasional weekend work may be required to support property needs or respond to emergencies. Please note that schedules may change from time to time, with or without advance notice, based on business requirements. Compensation: $22.00 - $23.00 Hourly Benefits: Medical, Dental, Vision, Vacation and Sick, 401K Schedule: Monday to Friday from 7:00 am to 3:30 pm with occasional after hours for maintenance emergencies. Responsibilities • Oversees personnel in the maintenance, landscaping, and housekeeping departments, • Performs minor repairs of all buildings and equipment., • Coordinate and supervise major repairs performed by licensed vendors until complete and report status to management., • Performs preventive maintenance procedures on mechanical equipment on a scheduled basis; inspects belts, checks fluid levels, replaces filters, repairs or replaces broken parts, etc., • Maintain optimal performance of building systems including mechanical, electrical/electronic, and HVAC., • Assist with pool maintenance., • Oversee daily landscaping maintenance of all common areas., • Completes daily, weekly, and monthly checklists on grounds work, equipment maintenance and general tasks., • Assists in monitoring and/or controlling maintenance, housekeeping, and landscaping inventory and/or supplies., • Responds to resident service/emergency maintenance requests and concerns in a timely manner., • Maintain records of scheduled maintenance and associated procedures., • Assists with the renovation/remodeling of buildings; repairs plaster and drywall; paints building structures., • Obtain estimates for supplies, repair parts; orders parts as needed., • Work to exceed the needs of the facility., • Initiate, perform, train & oversee all maintenance projects., • Develop and maintain relationships with vendors, negotiate pricing., • Good skill in the use of hand and power tools., • Preferred Education: High School Diploma, GED, or Trade school, • Preferred Experience: 6 years of maintenance and repair experience and at least 3 years of supervisory experience, • Valid driver’s license along with good driving record and auto insurance is required., • Experience with HVAC, electrical, and plumbing #CAMP

Job DescriptionSystems Engineer Tucson, AZ Company OverviewAt World View, we strive to be a responsible technology leader in the collection, analysis, and delivery of actionable information gathered by our strategically placed arrays of persistent sensors in the stratosphere.We provide on-demand, scheduled, and historical aerial data and analytics from sensors deployed to the stratosphere with persistent coverage, higher resolution, and increased value over traditional aerial and space imagery sources. Job DescriptionWorld View is looking for a Senior Systems Engineer to lead all technical aspects of new missions. They will ensure that World View maintains our technical leadership position in the industry through the development of “best in class” proposals, technical briefings, white papers, simulations and other related materials. The individual will be the primary technical point of contact and customer interface in the pre-program and concept program phases for each of the company’s primary customer segments. Role Responsibilities· Develop customized mission solutions combining platforms, remote sensing and communications technologies, and data management and exploitation software to meet customers’ needs· Ensure alignment between Business Development and Engineering through documentation such as Operations Concepts, derivation of engineering requirements from customer needs, and providing input into the company’s Technology Roadmap· Define requirements, interfaces, functions, behaviors, verification plans, and performance budgets for its products and services· Generate Operations Concepts, develop mission architectures, conduct mission engineering simulations, and vehicle configuration studies to support proposals · Act as the primary technical point of contact for pre-project and concept program phases· Maintain awareness of new developments in the wider technology and stratospheric systems community to include business models and products that address the needs of the civil, defense, and asset monitoring communities· Conduct Mission Analysis and Engineering· Develop, maintain, and evolve requirements for World View’s family of products and services· Define and document product and mission behaviors Qualifications· Minimum B.S. in related engineering field (Aerospace, Mechanical, Electrical, Systems, etc.)· 3+ Years experience in Systems Engineering· US Persons only – must be available to obtain security clearance, if necessary· Experience in product enhancement, product design, requirements development, new product introduction, production management, project management and program management.· Demonstrates creativity in problem solving that would result in new applications of the stratospheric flight platform.· Previous experience with Systems Engineering and knowledge of how to document customer needs and transcribe them into actionable requirements for the Engineering department. · Experience in more than one of the following areas: stakeholder needs capture, mission analysis, requirements development and derivation, architecture definition, trade studies, verification plan development, interface definition and management, and/or risk management.· Familiarity with Model Based Systems Engineering (MBSE) tools and languages (UML, SysML, LML)· Ability to work independently and meet deadlines· Strong communication skills Bonus Points· M.S. in Systems Engineering· Systems Engineering certifications such as the INCOSE SEP or OMG OCSMP· Experience with Product Design Engineering What We Offer· Work alongside experts in emerging technology· Full benefits including Medical, Dental, Vision, Life Insurance, etc.· Modern office with kitchen, exercise area, amazing views, and more! Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. World View is an Equal Opportunity Employer. This company does not discriminate in employment and personnel practices based on race, sex, age, handicap, religion, national origin or any other basis prohibited by applicable law. Hiring, transferring and promotion practices are performed without regard to the above listed items. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Are you an experienced and self-motivated Mobile Diesel Mechanic/Technician looking to advance your career? If so, Kooner Fleet Management Solutions wants you to join our growing team! We're looking for a talented Mobile Diesel Mechanic/Technician in the Tucson, AZ area to join our fast-growing, diverse and dedicated team. The Mobile Diesel Mechanic/Technician will be responsible for performing onsite and roadside preventative maintenance and repairs to heavy duty trucks and trailers to help keep our customers’ fleets moving. Why Kooner Fleet Management Solutions? With over 8 years of experience in the industry, Kooner Fleet Management Solutions is recognized as one of the leading providers of fleet maintenance and emergency repair services in the United States. Our commitment to providing efficient and reliable fleet maintenance and repair services ensures that our clients' trucks and trailers remain in top condition, allowing them to operate safely and meet high standards. As a family-owned business, we take pride in our work, our partnerships, and our dedicated team members. Schedule: Saturday-Monday, 1 PM - 12 AM, Thursday - Friday 6 AM - 2 PM Competitive Weekly Pay: $33 - $38/hr Excellent Benefits: • Company Truck, • Cell Phone Allowance, • Medical, Dental, Vision, • 401K Match, • Life Insurance, • Strong values: We are family owned, we value our employees and we have created a culture based on strong values., • Grow your skills: We will set you up for success with great training as you come on board and on an ongoing basis., • Accelerate your career: History shows that strong performers can move up to a Lead or Manager role or follow other paths within our company., • The stability of an industry leader: Our passion for quality work and excellent customer service have helped us to become an industry leader. Our customers include some of the nation's largest fleet operators. What the Mobile Diesel Mechanic/Technician role looks like: • Perform onsite scheduled preventative maintenance, DOT inspections and follow up repairs to Class 6-8 trucks in a mobile/field environment., • Perform Emergency Road Service Calls., • Respond to call center dispatched scheduled and unscheduled service and maintenance requests., • Diagnose and repair various types of truck equipment including, but not limited to the following: Electrical/Brake/Cooling Systems, Starters/Alternators, Air conditioning systems, Fan clutches, Engine electronics, Power steering systems, Engines (gas and diesel), Transmissions (manual and automatic), Clutches, Differentials, etc., • Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers and pressure gauges., • Use basic hand tools, precision instruments, as well as power tools, welding equipment, and jacks., • Road test vehicles to diagnose malfunctions or to ensure that they are working properly., • Maintain a high level of productivity and be able to work within or close to most standard repair times., • Obtain parts from approved local and national vendors as necessary for the repairs to be performed., • Maintain company issued service truck, conduct safety checks and pre/post trip inspections., • Perform other duties as assigned. What our ideal candidate looks like: • Minimum 3 years’ experience as a Diesel Technician on Class 6-8 trucks and trailers., • Proficiency in DOT inspections and air brake repairs., • Excellent verbal communication skills. Ability to effectively communicate with customers and their drivers., • Proficiency in the use of mobile devices, navigation of mobile applications and use of email to document repairs and communication., • Willingness to work varied schedules and work outdoors/in the elements at customer yards/locations., • Demonstrated ability to work independently, multi-task and apply initiative., • Positive attitude, safety conscious, and self-motivated., • In order to be covered on the company automotive insurance policy, all drivers must be 23 years of age or older with a valid driver's license and clean driving record within the last 3 years., • Must provide own hand tools that are adequate to perform job functions. Kooner Fleet Management Solutions is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants, free from discrimination and harassment. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We celebrate diversity and are dedicated to fostering a workplace where every team member can thrive. Kooner Fleet Management Solutions participates in E-Verify for employment eligibility verification. #KFMS1

Job DescriptionCable Assembler Job title: Cable Assembler Location: South Tucson Terms: Temp to hire Salary/rate: $16.00 an hour Requirements: At least 2 years of experience in electrical or cable assembly. Job Description: The assembler is responsible for assembling and inspecting electrical components to ensure the highest quality product is built for our customers. This role will be responsible for operations related to the final assembly build. Will maintain equipment and area cleanliness. Interfaces and works with safety, quality, and manufacturing personnel in identifying and implementing process improvements and process validations. ESSENTIAL FUNCTIONS: • Assembles Power Distribution Units (PDU), and other electrical components to company specifications., • Assembles cables, harnesses, electronic and electro-mechanical test equipment to engineering specifications., • Replaces and removes electrical components on PDU when needed., • Actively participates in continuous improvement initiatives providing recommendations and implementing enhancements to current methods and procedures as needed., • Seeks opportunities to improve quality and monitors own work to ensure quality is met., • Maintain the quality and upkeep of warehouse equipment including machinery. QUALIFICATIONS:, • High school diploma or general education degree (GED), • Familiar and comfortable with soldering, crimping, and assembling cables and connectors., • Ability to read engineering schematic and build product that matches the schematic., • Good coordination, motor skills and dexterity., • Must be able to follow both oral and written instructions when performing job duties., • Demonstrate accuracy and thoroughness., • Demonstrate good interpersonal skills and be a team player. Nesco Resource and affiliates (Lehigh G.I.T Inc, and Callos Resource, LLC) is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.Company DescriptionNESCO Resource Company Overview Established in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers. Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.NESCO Resource Company Overview\r\nEstablished in 1956, NESCO Resource employs over 10,000 people in 42 states and services a variety of local accounts as well as major accounts. Within NESCO Resource, we have three operating groups with the capability to staff effectively any positions that require Technology, Accounting & Finance, and Clerical & Light Industrial expertise. Rather than the generalist approach most employment agencies pursue, we practice the approach of a specialized staffing firm. We believe our outstanding local growth can be directly attributed to the credibility of our employees and their ability to focus on the specific needs of our customers.\r\n\r\nNesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

Job DescriptionCompany Description Segula Technologies is a global engineering and consulting firm specializing in innovative solutions across industries such as aerospace, automotive, energy, rail, and life sciences. Founded in 1985 and headquartered in France, Segula operates in over 30 countries, driving technological advancements, improving industrial performance, and supporting clients throughout the product lifecycle. With expertise in design, manufacturing, testing, and project management, Segula helps businesses tackle complex engineering challenges while fostering innovation and sustainability. Job Description Short term Contract ( 6 months ) Per diem: $315 weekly per diem. • Adhere to General Work Requirements, • Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft, • Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations, • Access and re-install aircraft components, which obstruct the performance of assigned tasks, • Perform basic mechanical and electrical removals and installations, • Document work performed per Inspections Procedures Manual (IPM), • Work on aircraft as well as in shops, • Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required, • Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems, • Fabricate parts/wire harness and install per engineering specifications, • Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges, • Assist with complex repairs at on-site and off-site locations, • Assist with engine removal and installation, • Assist in development of installations for engineering, • Assist with fueling/defueling aircraft as requiredQualifications, • Typically 3 years of avionics work experience or substantiated equivalent experience., • Ability to read and understand electrical engineering drawings., • Strong written and verbal communication skills for reporting on individual or aircraft status., • Own a basic set of hand tools and can demonstrate proper tool inventory and control., • Must obtain appropriate Ground Support Equipment (GSE) qualifications as required., • Must be able to work unscheduled overtime, including non-scheduled workdays and holidays., • Must be able to work outdoors in seasonal or inclement weather., • Ability to obtain a Security Identification Display Area (SIDA) badge, if applicable., • A Certification required if mandated by the customer (Commercial Aircraft); A Certification, P Certification, or A&P Certificate also acceptable., • Hold a GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certificate., • Experience working on corporate jet aircraft or commercial aircraft., • Basic PC skills. Additional Information Here’s a heads-up of the upcoming steps: • Phone Interview with Recruiter: We’ll begin with an introductory call to discuss your background and interest in the role. Please make sure to add your correct phone number. You will hear from us soon., • Interview with the Hiring Manager, • Offer Letter: We´ll extend you an offer and start the onboarding process., • Background Check & DOT Drug Screen: This step involves conducting a comprehensive background check, which includes reviewing criminal history, and other relevant records. Additionally, a Department of Transportation (DOT) drug screening will be carried out to ensure compliance with federal regulations for safety-sensitive positions, • You start your next challenge!

Job Description KE&G Construction Inc. is one of southern Arizona’s leading heavy-civil contractors. We are currently seeking a highly motivated individual who desires to learn and Build Your Future as an employee-owner. This opportunity is located in our Tucson and Sierra Vista locations for full-time, Experienced Heavy Equipment Mechanic. KE&G is an Equal Employment Opportunity Employer, and we encourage minorities and women to apply for all positions. The ideal candidate for this job should have the following credentials: REQUIREMENTS: • Positive attitude and desire to excel while working with fellow employee-owners., • Minimum 3-year experience., • Clean driving record, CDL a plus., • Self-Motivated, • Ability to work safely and efficiently with minimal supervision., • Maintain a safe and clean work environment, • Must be able to effectively communicate., • Will be required to work in a team environment with fellow employee-owners., • Ability to troubleshoot and repair a wide range of construction equipment, including excavators/scrapers/loaders/vocational trucks etc., • Utilize tools to perform system diagnostics and repairs on various components, including electronics, electrical systems, hydraulics, engine powertrain, air conditioning, clutch, air brakes, suspension, and transmission., • Skilled in electrical, hydraulic and emissions systems PHYSICAL DEMANDS AND WORK ENVIRONMENT • This position operates at a mechanic shop, requiring the ability to communicate with verbally others on site, in person and over the telephone, ability to read printed materials, signs and directions, stamina to maintain attention despite interruptions, ability to lift, push, pull, carry, handle or feel objects, supplies, tools, machinery and/or controls weighing up to 50 pounds and reach with hands and arms; climb stairs and/or ladders; balance, bend, stoop, kneel, crouch, crawl, lift overhead, traverse around or otherwise position one's self around the required work and safety requirements to navigating and perform activities in a safe manner., • Will be required to operate vehicles, trailers, machinery, equipment and other tools within local, state and federal safety guidelines., • This position operates in a professional field environment. The position requires working outside, frequently for long periods of time in all weather, including extreme hot and cold temperatures., • While working, the employee might be exposed to various chemicals, vapors, pollutants, virus or other air-borne pathogens, gases, uneven surfaces, loud noises, moving vehicles or machines and dust/debris.BENEFITS:, • Employee Stock Ownership Plan (ESOP) – Become a KE&G Employee-Owner!, • Employee activities include the Excelling Employee Owner Program, Employee Choice Awards, Family Picnic, Boot Bucks, Annual Shareholders Meeting, plus other exciting events and activities for the whole family!, • Competitive Salaries, • 401(k) plan, • Cost of Living Adjustments (COLA), • Paid time off, • Employee-Specific Development/Training Plans – Designed for you, with you!, • Blue Cross Blue Shield Medical Insurance – choice of HSA & PPO Plans, • HSA – weekly company contribution, • PPO Plans – Low premium for employees, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Company paid Life Insurance with AD&D, • Supplemental Life Insurance, • Short Term Disability, • Long Term Disability, • Hospital Indemnity, Critical Illness & Accident Insurance Equal Opportunity Employer We are an Equal Employment Opportunity Employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law. Powered by JazzHR iYd3KopvKX

Job DescriptionSalary: APPLICANTS MUST BE SITTING IN ARIZONA STATE District Sales Manager Job Summary: As a District Sales Manager, This is an individual contributor role, you will be responsible for managing and expanding our client base, developing strong relationships with existing customers, and driving sales growth. You will serve as the main point of contact for clients, ensuring their satisfaction and facilitating smooth communication between the company and its customers. This is an excellent opportunity for a skilled professional with a proven track record in sales and account management. Responsibilities: • Professionally represent Western Steel Buildings and understand our mission and our guiding questions., • District Sales Managers will be eligible to sell and manage buildings from 5,000+ square feet in specific markets., • Work diligently with the National Sales Manager to implement the strategies for increased sales in their assigned territory or area., • District Sales Managers will sell and manage new Western Steel Buildings projects from the initial client contact through the construction and completion of the project by the client., • Be knowledgeable about all facets of Steel Buildings from design to completion, including a general understanding of steel erection and concrete work., • Be proficient in the technical aspects of Western Steel Buildings, including proficiency in reading blueprints, site planning, snow load, wind load, etc., • Be able to demonstrate proficiency in building projects, including how the process of constructing a building works, from breaking ground to site work, foundation design, electrical planning, lighting requirements for different applications, hangar doors, curtain walls, mezzanines, HVAC, fire sprinkler systems, insulated panel systems, custom wall finishes, etc., • Be familiar with all steel building applications in all geographic locations including, but not limited to, industrial, commercial, equestrian, oilfield, indoor agricultural space, aviation, etc., • Proactively identify and establish relationships with potential clients., • Communicate professionally and follow up with all client inquiries provided by Western Steel Buildings in a timely fashion. All written / email inquiries received before noon must receive a response before the end of that business day. All phone inquiries not answered immediately must receive a returned phone call within 60 minutes., • Draft purchase orders for management approval, follow up accordingly, collect deposits, and draft uniform design approval documents, including preliminary design documentation for management approval., • Be proficient in the use of internal metal building design software., • Work with clients to finalize their steel building design and collect completed uniform design approval documents., • Add value to clients and projects by selling recommended accessories, installing them, and other items that reflect Western Steel Buildings Mission Statement., • Partner with the service team to facilitate building fabrication, delivery, and installation., • Coordinate referral client inquiries to Western Steel Buildings for appropriate responses., • Collect/solicit client reviews (google, yelp, etc.) after delivery and installation are complete., • 40% Travel Required Requirements: Education and Experience: • Bachelor's degree in business, sales, marketing, or a related field is preferred., • Proven experience in account management, business development, or sales within the construction industry, preferably with metal buildings or related products/services., • Strong knowledge of construction processes, building codes, and industry standards is highly desirable. Skills and Abilities: • Excellent interpersonal and communication skills, with the ability to build and maintain effective relationships with clients and internal stakeholders., • Demonstrated ability to drive sales growth and meet targets., • Strong negotiation and closing skills, with the ability to navigate complex sales cycles., • Exceptional problem-solving and decision-making abilities., • Proficiency in using CRM software, Microsoft Office Suite, and other relevant sales tools., • Self-motivated, results-oriented, and capable of working independently as well as collaboratively in a team environment. This job description is intended to convey information essential to understanding the scope of the District Sales Manager position. It is not intended to be an exhaustive list of qualifications, duties, or responsibilities. The organization reserves the right to modify, add, or remove job duties as necessary.

Job Description At Areté, we are at the forefront of utilizing innovative solutions, with great minds from all backgrounds, to help solve the nation’s most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we empower our team members with meaningful career development opportunities and a strong sense of ownership in our shared success. Discover your future with us. Our Stabilized Vision Technology team is seeking a hands-on Electrical Engineer to work with an agile team in the design and development of advanced electronics for stabilized airborne systems. This role involves creating rugged, high- performance equipment for deployment across various manned and unmanned platforms. As a technical contributor, you’ll play a key role in designing new sensors, circuits, and systems—starting from fundamental physical principles and system requirements, through prototyping, debugging, testing, and integration into larger operational systems. The ideal candidate thrives in a multidisciplinary environment, enjoys solving complex challenges collaboratively, and is passionate about electronic and electro-optic system design. This is a full-time, exempt, non-supervisory position is based in our Healdsburg CA, or Tucson AZ offices. Primary responsibilities: • Design, analyze, and test electronic circuits for high-performance stabilized pointing and electro-optic systems, • Develop high-reliability circuit cards that meet stringent performance and environmental requirements, • Collaborate with engineering and science teams throughout the full product lifecycle—from concept through production and support Health & Wellness: • Medical, Dental & Vision Insurance, • Life and Long-Term Disability (LTD), • Vision Reimbursement, • 401(k) Retirement Plan Contributions, • Employee Stock Ownership Plan (ESOP), • Flexible Scheduling, • Paid Time Off (PTO), • Creativity and innovation in solving challenges, • Integrity and responsibility in all actions, • Collaboration across teams and specialties, • Responsiveness in fast-paced environments, • B.S. in Electrical or Electronic Engineering with 5+ years of experience, or M.S. with 3+ years; equivalent education or experience will be considered., • Proficient in detailed PCB design, including complex multilayer layouts, • Strong design experience in analog, digital, and power electronics, • Proven ability to take circuit cards through the full development cycle—from concept through production release, • Demonstrated success in producing production-ready documentation for both circuit cards and system-level assemblies, • Proficient in Altium Designer for schematic capture and PCB layout, • Experience with SPICE for circuit simulation and analysis, • Familiarity with microcontrollers and embedded system development, • Hands-on experience with Xilinx FPGAs, including Vivado and Vitis toolchains, • Solid understanding of high-speed digital and RF circuit design principles Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at 818-885-2200 for assistance.

Job Description NSC Skilled Trades is seeking an Electrical Engineer III for a permanent role in Tucson, AZ. JOB DETAILS: PAY: $95k - $110k/year START: ASAP DURATION: Permanent HOURS: 40 hrs/week TIME: 1st Shift, 8:00 am – 5:00 pm LOCATION: Tucson, AZ SCOPE: • Support manufacturing and fielded electronic products for industrial and medical applications, • Troubleshoot electrical and RF-enabled systems, root cause analysis, and corrective actions, • Maintain and update schematics, PCB layouts, and component libraries, • Address component obsolescence and update documentation, • Develop or update test fixtures and work instructions, • Collaborate with mechanical, software, and quality teams, • Lead or support engineering change requests (ECRs) and product documentation updates, • Mentor junior engineers and participate in audits, reviews, and CAPA activities, • Recommend improvements for reliability, cost, manufacturability, and compliance REQUIREMENTS: • Bachelor’s degree in Electrical Engineering or equivalent, • 5–7 years experience in electronics design, sustaining engineering, or manufacturing support, • Proficient in schematic capture and PCB layout (Altium, OrCAD), • Electrical troubleshooting at component and system levels, • RF design or RF-enabled system experience, plus measurement instruments (Spectrum Analyzer, VNA), • Familiarity with embedded system hardware; software/firmware experience is a plus, • Strong communication, documentation, and collaboration skills, • Self-motivated and organized PREFERRED QUALIFICATIONS: • Experience in electronics manufacturing for high-reliability or safety-critical products, • Knowledge of IEC, FCC, ISO, UL, EMC/EMI standards, • Understanding of DFM, DFT, and lifecycle management, • Familiarity with configuration/change management tools and structured workflows, • Experience with root cause analysis methodologies (8D, Fishbone, 5 Whys) PHYSICAL REQUIREMENTS: • Ability to sit or stand for long periods and work at a computer or lab bench, • Manual dexterity for small components and tools, • Occasionally lift up to 50 lbs, • Normal color vision and visual acuity required TRAVEL: • Occasional up to 10% for supplier visits, field investigations, or training CERTS / DRUG SCREEN / BACKGROUND: • Basic Background Check, • 5-Panel Drug Screen APPLY TODAY! Submit your resume to and text your first and last name with “ELEC ENG III – TUCSON” to 516-662-2849

Job Description MKS2 Technologies, LLC, an award-winning high growth small business, creates innovative and customer-centric technology solutions in the areas of Cyber Security, Instructional Design and Training, Software Engineering and IT Support Services to improve the security and well-being of our clients. Our commitment to excellence and our "Mission First" orientation has resulted in steady growth and an expanding client base across government agencies. We have employees nationwide and for the past three consecutive years were named one of the fastest growing Veteran-owned companies in the nation. Please take a moment to browse through our website and learn more about what it means to serve with MKS2. Senior System Safety Engineer – Secret Clearance Location: Tucson, AZ (On-site) Salary: $100,000 - $125,000 annually with full benefits Clearance: Secret About the Organization Our teams solve tough, meaningful problems that help create a safer, more secure world. The Life Cycle Engineering (LCE) organization ensures that our products are safe, reliable, maintainable, and delivered on time. LCE supports every stage of a product's life cycle—from conception through deactivation—with a strong focus on product support disciplines including Reliability, System Safety, and Supportability. Within LCE, the Naval Power (NP) System Safety team plays a vital role in ensuring mission readiness and safety across complex defense systems. Position Overview We are seeking a highly motivated Senior System Safety Engineer to join our Naval Power System Safety team in Tucson, Arizona. This position involves leading and executing system safety programs in compliance with MIL-STD-882E and other applicable defense standards. The ideal candidate is a proactive problem solver with a strong systems or safety engineering background and the ability to collaborate across multidisciplinary teams and programs. Key Responsibilities * Lead and execute MIL-STD-882E compliant System Safety Programs, or customer-approved equivalents. * Perform System Safety Program tasks and analyses, including hazard identification, assessment, and risk mitigation. * Coordinate with customer safety representatives and gain approval from Safety Review Board authorities. * Collaborate across Integrated Product Teams (IPTs) to identify, eliminate, or control hazards throughout the product lifecycle. * Conduct system and design analyses and brief findings at technical reviews and safety approval meetings. * Interpret and apply system requirements, customer specifications, and military standards related to system safety. * Prepare reports, documentation, and presentations for internal stakeholders and government customers. * Support program safety through production, operation, demilitarization, and disposal phases. Qualifications You Must Have * Bachelor's degree in Science, Technology, Engineering, or Mathematics (STEM). * 5+ years of relevant Systems Engineering or Safety Engineering experience. * (An advanced degree may substitute for additional years of experience.) * Experience in System Safety Engineering, Systems Engineering, Electrical Engineering, Software/Firmware Engineering, or equivalent safety-related discipline. * Ability to obtain and maintain a U.S. Government security clearance (U.S. citizenship required). Qualifications We Prefer * Experience supporting DoD System Safety Programs or weapon combat systems. * Familiarity with Earned Value Management Systems (EVMS) and proposal development. * Ability to solve complex problems using available resources and research. * Strong written, verbal, and presentation skills, with the ability to communicate effectively across teams and stakeholders. * Proven leadership and project management skills; capable of managing a safety program and guiding supporting personnel. * Master's degree in Science, Technology, Engineering, or Mathematics (STEM). Diversity creates a healthier atmosphere: MKS2 Technologies is proud to be an Equal Employment Opportunity / Affirmative Action employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, protected veteran status, disability status, sexual orientation, gender identity or expression, marital status, genetic information, or any other characteristic protected by law.

Job Description POSITION OVERVIEW Plans, directs, and coordinates manufacturing processes in plant by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Develops, evaluates, and improves manufacturing methods. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency. Develop and recommend short and long-range goals and objectives for Lean Manufacturing. Evaluate current manufacturing systems to determine areas for improvement and recommend implementation schedule. Maintain current knowledge of Lean Manufacturing methodologies, prepare capital request, cost justifications to support recommendations. Prioritize and implement schedules for assigned projects using appropriate planning methods and facilitate project implementation. Serve a facilitator coach for teams during Kaizen events and follow up to assist supervisors to sustain work improvement. Confers with planning and design staff concerning product design and tooling to ensure efficient production methods. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials, or parts, and evaluates products according to specifications and quality standards. Create Investment Project Proposals (IPP) for the purchase of new equipment and facility improvements. The IPP process includes calculating the cost of new equipment and justifying the purchase by calculating savings and efficiency in a formal written document. Estimates production times, staffing requirements, and related costs to provide information for management decisions. Resolves deviation reports concerning product or material with plant personnel including maintenance personnel to direct equipment adjustments. Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes. Applies statistical methods to estimate future manufacturing requirements and potential. Distributes product/part drawings to appropriate plant personnel. Other duties may be assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Bachelor's degree in Manufacturing / Industrial Engineering or related field from a four-year college or university. Knowledge of manufacturing processes in a sheet metal/extruded aluminum environment. Two years related experience and/or equivalent combination of education and experience. Prefer knowledge of Lean Manufacturing methodologies and a proven track record with application. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and permutations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS None required. COMPUTER SKILLS Required knowledge of MS Excel and MS Word using MS Windows platform. MS PowerPoint and MS Access experience a plus. OTHER SKILLS AND ABILITIES Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends. Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction. PHYSICAL DEMANDS While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and risk of electrical shock. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals; extreme heat; and vibration. The noise level in the work environment is usually moderate. Other: • Will need to pass a background check, • Will need to pass a 12 panel drug test (marijuana included)

Job Description At Areté, we are on the forefront of utilizing innovative solutions, with great minds from all backgrounds, to help solve the nation’s most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. We support the development of new detection capabilities that use a variety of remote sensing methodologies (EO/IR, Radar, Lidar, Chemical/Biological sensors, etc.). We are seeking outstanding applicants for our Optical Systems Engineer position in Tucson, Arizona. The successful candidate will develop and execute scientific and engineering research projects which typically involve applying fundamental understanding of optical phenomena related to various sensor systems, developing performance models, designing optical hardware, and using basic mathematical methods to solve scientific and engineering problems. This position is be based in our Tucson, AZ office and is a non-supervisory, exempt, full-time role. Primary responsibilities: • Design, models, integrates, and tests airborne optical sensor systems including visible/EO and IR cameras, LIDAR systems, and optical test equipment., • Develop test software for control of prototype EO systems, test automation, and flight testing. Works in conjunction with mechanical engineers, electrical engineers, and software engineers, toprovide integrated design solutions for Areté’s customers., • Business development, requirements development, concept and detailed design, presentation to customer at SRR, PDR, CDR, assembly, integration, and field testing., • Mentorship and direction of work for more junior employees is also expected., • Develop and apply imaging sensor performance models, • Analyze data, algorithms, and their interaction to improve algorithm performance, • Sub-system and system level testing, including test design, automation and reporting:, • Visible CMOS sensor testing, • Mid-wave IDECA testing, • Lens MTF testing, • Vibe and thermal testing, • Interact with system and sensor designers to improve hardware, • Present major sections of materials to customers at design reviews and other Technical Interchange Meetings, • May support outdoor field tests with occasional travel Health & Wellness: • Medical, Dental & Vision Insurance, • Life and Long-Term Disability (LTD), • Vision Reimbursement, • 401(k) Retirement Plan Contributions, • Employee Stock Ownership Plan (ESOP), • Flexible Scheduling, • Paid Time Off (PTO), • Creativity and innovation in solving challenges, • Integrity and responsibility in all actions, • Collaboration across teams and specialties, • Responsiveness in fast-paced environments, • Bachelor’s or Master’s in optical engineering strongly preferred; physics or other fields will be considered if there is relevant experience – applicant must have strong optics background., • Understanding of optical imaging systems, light propagation, radiometry, MTF testing, • Experience with scientific programming in LabVIEW, Matlab, Python, or similar languages to support test and automation of test, • Data acquisition and instrument control using LabVIEW, • Strong analytical skills demonstrated through in-depth physics-based modeling and data analysis, • Strong education in fundamental optics is required, • Demonstrated experience with optical test is required, • Proclivity towards systems engineering techniques and process, • Intellectual curiosity and desire for continuous learning, • Infrared imaging experience including system design, modeling and test, • Experience with large format (16MP+) cryogenically cooled IR IDECAs, • Experience developing custom IR lenses, • Experience with Fast Scan Mirrors, • Zemax or similar optical design software, • Senior Optical Systems Engineer: $150,000 - $180,000 [minimum experience of BS+9 years, MS+7 years, or PhD+4 years] Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at 818-885-2200 for assistance.

Job Description Position Title: Digital Signal Processing (DSP) Communications Engineer Employment Type: Full-Time Work Location: Arizona Compensation: Open Relocation: Available, with full relocation assistance provided Position Overview We are looking for motivated engineers who thrive in multidisciplinary research and development teams. The role involves collaborating with electrical engineers, mathematicians, and computer scientists to design and deliver custom digital signal processing solutions and communication systems in support of U.S. national security efforts. Candidates who enjoy working in dynamic environments—and perhaps the desert setting—will find this position especially rewarding. Key Responsibilities * Contribute to small, collaborative project teams focused on the full life cycle of communications systems: concept development, analysis, design, coding, testing, deployment, and ongoing support. * Develop algorithms, interface with hardware, design graphical user interfaces, and support database development as part of implementation work. * Ensure deliverables follow best practices, including clear documentation, structured code, and thorough testing. * Engage directly with customers and end users to understand needs and refine solutions. RequirementsMinimum Qualifications * Bachelor’s degree in Electrical Engineering, Applied Mathematics, or a closely related discipline. * Hands-on experience with scientific programming using C, C++, or a comparable high-level language on Unix/Linux platforms. * Solid foundation in digital signal processing (DSP) or communications theory. * Active TS/SCI Clearance. Preferred Qualifications * Advanced degree (Master’s or Ph.D.) in Electrical Engineering, Applied Math, or a related technical field. * 5+ years of applied experience in system development and deployment. * Familiarity with X-Midas or MATLAB. Relevant Background (any of the following is a plus) * LIDAR theory, applications, or simulation work * Satellite communications systems * Cellular network communications * Wireless protocols (modern standards) * RF system design and development * Electronic warfare technologies * Advanced modulation techniques * Algorithm creation and optimization * Signal geolocation methods * Signal conditioning techniques * Interference cancellation approaches * Coding theory and error-correction methods BenefitsCompetitive package including stock options and 401(k)

Job Description GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. Aircraft Sheetmetal Mechanic GAL AeroStaff., which provides specialized staffing and recruiting services in the Business & Commercial aircraft industry, is presently seeking a Sheet Metal Technician in Tucson, U.S.A. GAL AeroStaff is an internationally approved OEM service provider / supplier. We offer competitive salaries, as well as a professional and ethical work environment. Job Type: Full-time, Minimum of 40hrs per week Pay: $38.00 per hour depending on experience, includes per diem wages Location: Tucson AZ About: The largest MRO provider for the CRJ Series fleet in North America, developed from the merging of two important heritages: Main Duties: • Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner., • Remove / install aircraft components as required, • Fabricate and or modify structural modifications on aircraft parts, • Perform minor structural repairs on composite components either attached or detached, • Assist in conducting hidden damage inspection of aircraft structures, • Assist with complex structural repairs either on or off aircraft, • Operate ground support equipment if required, • Assist with aircraft component repair, • Perform mechanical / electrical removals and installations as required, • May assist with maintenance at off-site locations, • Assist in wing removal as required, • Inspect confined areas of airframe, • Assist in designing, modifying and welding metal fixtures as required, • Personal Safety equipment like steel toe boots., • T-Shirt in the name of GAL or the client as preferred., • On-site dedicated local support to ensure proper integration for 2 weeks., • All visa fee paid by GAL., • Minimum of 8-10 years of structural sheet metal repair / modification experience or substantiated similar experience OR Airframe license with 5 years experience, • Approve a technical test, • Completed Sheetmetal A/C Tech school or equivalent schooling, • FAA A&P license OR “A” license is preferred but not needed, • Able to interpret and work with mechanical engineering drawings, • Ability to effectively communicate (verbal & written) aircraft status, • Own a basic set of hand tools with the ability to demonstrate inventory & control of tools, • Comfortable with shift work (12 hours shifts, overnights, weekends, holidays), including nonscheduled overtime, • You have the ability to obtain a Security Identification Display Area badge (SIDA) (if applicable)

Job Description Position: Software Engineer Employment Type: Full-Time Location: Arizona Compensation: Open Relocation: Available with full relocation support Role Overview We are seeking highly motivated Software Engineers with TS/SCI clearance to help design and implement advanced digital signal processing, geolocation, and communications solutions that address some of today’s most pressing national security challenges. You’ll be part of a collaborative R&D team of electrical engineers, mathematicians, and computer scientists who share a commitment to solving complex problems through innovation and technical excellence. Key Responsibilities * Design and implement real-time processing solutions. * Develop and optimize signal processing and geolocation algorithms for efficient performance. * Validate and test solutions using real-world data before deployment. * Create intuitive user interfaces and data visualization tools. * Contribute to the evolution of internal frameworks as applications transition toward cloud-based environments. * Participate across the full engineering lifecycle: systems engineering, software development, integration and testing, deployment, and operations/maintenance. * Gain firsthand experience seeing your work in action, with direct mission feedback from end users demonstrating the impact of your contributions. RequirementsRequired Qualifications * Bachelor’s, Master’s, or PhD in Computer Science, Computer Engineering, or a related field. * Proficiency in C, C++, and Python, with experience applying them to scientific or engineering applications in Linux environments. * Familiarity with agile development methodologies across the full software lifecycle. * Strong communication skills with the ability to collaborate with customers and senior engineers. * Ability to contribute to the development of innovative technical solutions addressing complex customer challenges. * Active TS/SCI security clearance. Areas of Technical Interest Candidates with background or interest in one or more of the following areas will be well-suited for this role: * High-Performance Computing (parallel and distributed systems) * Numerical algorithms * GPU acceleration (CUDA) * Machine learning techniques and applications * Virtualization and cloud-based computing * Visualization of large engineering datasets * HTML5 and real-time GUI development BenefitsExcellent package, including stock options and 401(k)

Job Description At Areté, we are on the forefront of utilizing innovative solutions, with great minds from all backgrounds, to help solve the nation’s most complex security challenges. We strive for an inclusive, collaborative team environment that approaches differences as opportunities for innovation and excellence. As an employee-owned company, we foster an atmosphere that propels diverse career opportunities and professional growth. Discover your future with us. We support the development of new detection capabilities that use a variety of remote sensing methodologies (EO/IR, Radar, Lidar, Chemical/Biological sensors, etc.). We are seeking outstanding applicants for our Engineer 2, Optical Systems position in Tucson, Arizona. The successful candidate will develop and execute engineering development projects which typically involve applying fundamental understanding of optical phenomena related to various sensor systems, developing performance models, designing optical hardware, and using basic mathematical methods to solve scientific and engineering problems. This position is an exempt, non-supervisory, full-time role. Primary responsibilities: • Design, models, integrates, and tests optical sensor systems including visible and IR cameras, LIDAR systems, and optical test equipment., • Develops software for the purpose of testing and automating test procedures., • Works in conjunction with systems engineers, mechanical engineers, electrical engineers and software engineers to provide integrated design solutions for Arete’s customers., • Responsibilities include assisting with requirements development, concept and detailed design, presentation to customer at SRR, PDR, CDR, assembly, integration, and field testing., • Develop and apply imaging sensor performance models including MTF and radiometric models, • Optical systems design including visible and IR imaging system, • Testing of Fast Steering Mirrors, • Development of requirements, • Presentation of results to staff and customers Health & Wellness: • Medical, Dental & Vision Insurance, • Life and Long-Term Disability (LTD), • Vision Reimbursement, • 401(k) Retirement Plan Contributions, • Employee Stock Ownership Plan (ESOP), • Flexible Scheduling, • Paid Time Off (PTO), • Creativity and innovation in solving challenges, • Integrity and responsibility in all actions, • Collaboration across teams and specialties, • Responsiveness in fast-paced environments, • Bachelor’s or Master’s in optical engineering, electrical engineering with optics emphasis or other relevant field with strong emphasis on optics, • Experience with scientific programming in Labview, Matlab, Python, or similar languages, • Data acquisition and instrument control using LabVIEW or Python, • Intellectual curiosity and desire for continuous learning, • Infrared imaging experience including system design, modeling and test, • Experience with large format (16MP+) cryogenically cooled IR IDECAs, • Experience developing custom IR lenses, • Experience with Fast Steering Mirrors, • Zemax or similar optical design software Other Considerations Areté is committed to the principles of equal employment opportunity and nondiscrimination, and we believe every person has the right to be treated with fairness, dignity, and equal consideration. Areté is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, marital status, national origin, age, veteran status, disability, or any other characteristic protected by applicable federal, state, or local law. U.S. citizenship is required to meet position eligibility. Successful passage of a criminal background screen is required to meet position eligibility. Selected applicants will be subject to a government security investigation and must meet eligibility requirements for access to classified information. Areté will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Los Angeles Fair Chance Initiative for Hiring. Successful passage of a Department of Transportation (DOT) drug test is required to meet position eligibility. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our website because of your disability. To request an accommodation, please contact Areté Human Resources at 818-885-2200 for assistance.

Job DescriptionMove Forward with Volt Volt is immediately hiring for a Systems Safety Engineer - 14939300 - TUCSON, AZ - Onsite. What You Will Do Leading one or more MIL-STD-882E compliant system safety programs Performing MIL-STD-882E System Safety Program tasks and analyses, or customer’s approved equivalent Coordinating with customer safety representatives to gain safety approval from appropriate Safety Review Board authorities Working across all integrated product teams and lines to properly eliminate hazards or provide effective controls. Collaborating with Program Management and government approval authorities from program startup through production to demilitarization and disposal backgrounds Performing System Safety Program, Hazard analyses, or Design analyses Briefing safety of the program at technical reviews and as part of the safety approval process Interpreting system requirements, customer specifications, and military standards Preparing internal and customer reports describing various analyses relevant to the System Safety program This is a 12 Month Contract or Contract to hire Clearance: Active Secret Clearance Qualifications Must Have: Typically Requires: Bachelor’s degree in science, Technology, Engineering or Math (STEM) and minimum 5 years of relevant Systems Engineering or Safety Engineering experience. An advanced degree may account for additional years of experience as required for this position. Experience with: System Safety Engineering, Systems Engineering, Software or Firmware Engineering, Electrical Engineering, or equivalent Safety Engineering. Qualifications We Prefer: Experience in weapon combat systems Experience with DoD System Safety Programs Experience with Earned Value Management Systems (EVMS) and Proposal Development Ability to solve complex problems by leveraging available resources and research material Strong written, verbal and presentation skills Strong interpersonal and project management skills, with the ability to manage a safety program and provide direction to supporting safety personnel Master’s degree in science, Technology, Engineering or Mathematics (STEM) Pay Rate:- $60 to $70/hr. *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email or call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.