Trabajos erp en Rochester, New YorkCrear alertas

Job Description Position Summary: The Senior Manufacturing Engineer will be responsible for contributing to the design of production machinery and will identify and recommend solutions to production problems related to materials, processes, and tooling. They will troubleshoot and diagnose assembly processes and reduce total defects through the analysis of data and corrective actions. This position will also support the functions of the WG Engineering Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Design and/or enhance manufacturing processes to assemble a bill of materials into a final product., • Utilize methods for waste minimization within a manufacturing system and address productivity., • Lead process improvements and controls through use of analysis and inspection/validation techniques, • Document Corrective Actions and Preventative Actions., • Generate, validate, and update as needed assembly work instructions in a clear and presentable configuration., • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., • Support both assembly floor priorities and longer-term development project activities. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Respect & Integrity – Treat people with respect, work ethically and with honesty and integrity, inspire the trust of others, demonstrate appreciation and sensitivity for cultural differences, help promote inclusion and understanding of the value of diversity, embrace differences and support a harassment-free environment. Minimal Qualifications: • Minimum bachelor's degree (BA/BS) in mechanical, electrical, manufacturing engineering, or equivalent., • Knowledge of standard manufacturing techniques such as fastening, structural adhesive bonding, hand assembly/low volume operations and tools and functional product testing., • Experience with precision alignments and tolerance analysis., • Use of techniques such as additive manufacturing/3D printing to create assembly floor aids and holding fixtures., • Experience with methods for process improvement and control., • Knowledge of incoming inspection and validation techniques, such as optical inspection and CMM., • Basic knowledge of the requirements of an ERP system for product specifications and bills of materials and routings., • Experience in additional disciplines such as electrical/electronic, computer/data acquisition, optics., • 5+ years of experience in new product introduction and sustaining engineering., • Working knowledge of SolidWorks and PDM., • Experience in utilizing automation such as robotic assistance and metered dispensing systems, PLC, and Vision Systems as utilized for aiding productivity in manufacturing., • Knowledge of Six Sigma analysis for process improvement and control. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable. PIfd9ac893293a-25405-38928651

Job DescriptionFLOWER CITY GROUP is hiring a MATERIAL HANDLER for B-Shift! This is a perfect opportunity for anyone with manufacturing experience who is looking to be part of a fun, successful, and growing company within the printing and packaging industry! We Hustle, We Own, We Learn, We Invent, and We Believe! Do you? If so, apply today! Position Title: Material Handler Pay Type: Hourly FLSA Designation: Non-Exempt Reports to: Logistics Manager Location: Rochester, NY – Lee Rd Schedule: M-F 3:30pm - 12:00am Summary/Objective: The responsibility of the Material Handler is to optimize the profitability of Flower City by performing to the highest level of efficiency and tasks listed below. Through these activities, it will ensure that the highest level of productivity is consistently achieved. Essential Functions: • Load and ship all outgoing material., • Process all outgoing paperwork., • Receive incoming deliveries, and ensure accuracy of materials and shipments by verifying vendor, Sku/part number, quantity received in compliance to PO, Pallet tag, BOM., • Work in ERP system, entering receipts, data, configuring reports and resolving discrepancies., • Pull orders to ship and check accuracy of orders., • Prepare documents such as inventory references, bills of lading and shipping orders to route materials., • Band and shrink-wrap customer orders for shipping., • Clean and maintain shipping area., • Inspect and operate all material handling equipment., • Receive and distribute all courier packages (e.g., FedEx, Airborne, UPS) when required., • Process all courier paperwork when required., • Shipping and Receiving, • Machine Operation, • Maintain cooperative working relationship with supervisor., • Demonstrate ability to tactfully handle difficult situations., • Consistently shows ability to recognize and deal with priorities., • Perform all duties in an independent manner with little supervision., • Recognize and performs duties which need to be performed although not directly assigned, • Seeks guidance and direction as necessary for performance of duties., • Demonstrates good judgement in investigating problems., • Sitting, standing, and/or walking for up to eight hours per day., • Frequently required to lift and/or carry up to 30 lbs., • Occasionally required to push and/or pull up to 50 lbs., • Occasionally required to stoop, kneel, crouch, crawl, and climb., • Regularly required to talk and/or hear, see, and perform repetitive motion., • Required to see color and use depth perception. Preferred Education and Experience: • A two-year degree or equivalent from a technical school, • Two (2) years of work experience or an equivalent of four (4) years in the industry, • Packaging experience highly preferred AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job Description Elmira Stamping & Manufacturing-North is currently seeking a Production Control & Work Order Processor to join our team. As a Production Control & Work Order Processor, you will play a crucial role in supporting the operations team by performing various administrative and operational tasks. This role requires a strong attention to detail and the ability to thrive in a fast-paced environment. Additionally, this role offers a fantastic opportunity to work directly with our Leadership Team, with a clear path for career advancement and professional growth. About Us: Elmira Stamping & Manufacturing has specialized in medium- to high-volume contract metal stamping, progressive die stamping, and CNC machining since 1970. Elmira Stamping & Manufacturing specializes in both deep-draw and progressive die stamping. We are equipped with man servo, high-speed, mechanical, and hydraulic stamping presses ranging from 30 to 400 tons. Our machines are optimized for automation with in-die contact and non-contact sensors. We are also experts in secondary put-and-take operations for parts that cannot be completed in a progressive die. Additionally, we have multiple 5-axis Emmegi XT extrusion milling centers with a bed capacity of 30 feet, plus turrets, lasers, and more. The foundation for everything we do and make at Elmira Stamping is an unwavering commitment to quality and customer satisfaction! Position Overview • Create, release, and manage work orders based on production schedules, customer orders, and inventory levels, • Coordinate with engineering, purchasing, and production teams to ensure work orders are complete and accurate, • Monitor production progress and update schedules to reflect changes in priorities or capacity, • Maintain accurate records of work order status, material availability, and job completion, • Identify and resolve discrepancies in work orders, BOMs, and routing information, • Assist in planning and scheduling production activities to optimize workflow and minimize downtime, • Communicate with internal teams to ensure timely delivery of parts and finished goods, • High school diploma or equivalent; associate degree or technical certification preferred, • 2+ years of experience in production control, scheduling, or manufacturing operations, • Familiarity with sheet metal fabrication processes and terminology, • Proficiency in ERP/MRP systems and Microsoft Office (Excel, Word, Outlook), • Strong organizational and time management skills, • Ability to read and interpret engineering drawings and work instructions, • Excellent communication and problem-solving abilities, • Attention to detail and commitment to accuracy, • Understanding of inventory control and material planning, • Ability to work in a fast-paced, deadline-driven environment Total Compensation Package: • Wage, • This role is based in the State of New York which requires the disclosure of salary ranges. The expected salary range for this position is $20.00 - $28.00 per hour. Elmira Stamping & Manufacturing provides salary ranges as a good faith estimate of what the company reasonably expects to pay for the position at the time of posting. Compensation offered to a selected candidate may vary based on factors such as (but not limited to) a candidate's job-related qualifications, skills, competencies, experience, and geographic location. The expected salary range for this position is subject to change and may be modified in the future., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance Elmira Stamping & Manufacturing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Join Our Team at HuFriedyGroup – Innovating Excellence in Dental Instrument Manufacturing At HuFriedyGroup, we are committed to providing high-quality dental instruments to organizations and professionals worldwide. We value innovation, craftsmanship, and dedication to improving oral health outcomes globally. Our people are our strength, and we foster a collaborative environment where every team member can thrive. When you join HuFriedyGroup, you become part of a company that truly values YOU, and we are committed to investing in your future both professionally and personally. We offer competitive salaries, comprehensive healthcare benefits, tuition assistance, generous paid time off, holidays, a matching 401(k), and annual merit and incentive plans. Position Summary The Warehouse Associate I role, is a functional role responsible for performing all required functions needed to pick and pack an order, assemble, ship, and/or receive Customer product while ensuring proper and accurate documentation. Benefits: Healthcare, Vision, Dental, 401K Match, Quarterly Bonuses, PTO, Company Holidays Duties The below listed duties are reflective of all HuFriedyGroup Distribution/Warehouse locations, thus local skill requirements and essential duties may vary: • Performs all Distribution/Warehouse functions as outlined in established procedures., • Select, check, pack and/or palletize, and label all types of standard orders for shipment, • Perform highly repetitive packaging, assembly, and/or machine operation, • Receives Customer product through acceptance or unloading shipping container, including pallet breakdown, and identifying box weights; processes all applicable documentation in an accurate manner., • Coordinates staging of incoming Customer product by transferring or overseeing the transfer of product to the non-process storage locations in a safe and damage-free manner., • Inspects finished goods as they move from packaging to assembly, as well as inspect incoming or outgoing Customer product for damages and/or count discrepancies and report such conditions as outlined in established procedures., • Maintains and submits warehouse reports depicting where products are staged within the facility., • Verifies that all identified damages and/or count discrepancies have been reported and resolved., • Ensures shipment of product within shipping deadline by maintaining contact with internal facility staff. Prepares product for shipment by retrieving Customer product from processed area and staging in shipping area; prepares accurate shipping documentation; loads product into shipping trailers/containers or transfers small packages to delivery service., • Ensures timely receipt or shipment of Customer product by assisting material handling activities, loading and unloading trucks., • Ensures quality conformance against bills of material as well as visual controlled images., • Actively participates and supports Lean and Safety initiatives, as well as daily cycle count programs and other directives, when required., • Maintain a safe and clean working environment., • Operate forklift and/or other material handling equipment, as needed, • Meet department productivity and quality goals. At HuFriedyGroup, we understand that valuable skills and experience come from all walks of life. If you don’t have a college degree or high school diploma, don’t worry—it won’t disqualify you from being considered for this role. We value the unique perspectives and abilities you bring to the table. Required Experience • 1-2 years related Warehouse Experience or shipping/receiving experience, • General proficiencies in Microsoft Office and ERP required (SAP and/or ShopVue preferred), • Ability to be licensed to operate powered industrial equipment in a safe and professional manner (i.e. Forklift or yard truck)., • Ability to multi-task, adapt to changing responsibilities, and prioritize duties, • Ability to work under regularly supervision, either independently or as a team, in a fast paced, changing environment, • Requires ability to navigate through defined computer screens and STERIS Operational Data Management System., • Organizing, analyzing, and basic math skills (four basic arithmetic functions in all units of measurement, decimals, ratios, rates, percentages)., • Show an attention to detail and ensure data accuracy (Receiving Reports, Bills of Lading, etc.)., • Requires effective interpersonal skills as demonstrated through prior experience., • Able to adapt to changing duties and responsibilities., • Normal hearing range sufficient to hear alarms, bells, horns, etc., • Requires knowledge of DOT regulations., • Maintain positive and cooperative communications and collaboration with all levels of employees, customers, contractors, and vendors If you require reasonable accommodations to apply for a position, participate in the recruitment process, or perform essential job functions, please contact us at 773-868-5534. We are committed to supporting you throughout your journey with HuFriedyGroup! Monday - Friday, 1st Shift: 7:00 am - 3:30 pm

Job Description Title Shipping and Receiving Specialist Department Shipping and Receiving Reports to Director of Supply Chain SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: The primary functions of the job will be to supply/replenish the optical and mechanical manufacturing areas with all the components needed for daily production as well as receive and inventory all finished goods while maintaining the highest levels of inventory accuracy. Secondary functions of the job will include assisting with all aspects of the order fill, shipping, and receiving functions. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Complete, pick, and kit orders for production utilizing an ERP job pick list., • Deliver orders to various manufacturing areas., • Pick up and return to inventory: completed parts, WIP, excess and non-conforming materials., • Receive, label, and put away product using established procedures., • Process all transactions thru the Epicor ERP system., • Conduct daily cycle counts to insure inventory accuracy., • Ensure that inventory moves in FIFO order at all times., • Assist with shipping, receiving, and other functions as needed., • Effectively communicate, in writing and verbally, with all levels of management regarding any concerns or issues that could negatively impact production., • Unload delivery vehicles utilizing carts, pallet jacks, and occasionally forklifts., • Unpack parcels, verify, content, and receive into Epicor., • Notify and or deliver materials to appropriate departments., • Generate daily scheduled shipment reports., • Pull product from warehouse bins., • Proactively seek out any WIP that is expected to ship., • Pack and ship according to Customer requirements., • Ensure any/all documentation required by Customer is obtained and placed with shipment., • Process all transactions in the Epicor system, • Schedule and ship parcels using: UPS, FedEx, DHL, LTL carriers. Local small package delivery companies, etc., • Maintain all shipping records., • Troubleshoot any and all issues to resolution. You Have: • High school diploma or GED required; Associate degree in Business, Logistics, or related field preferred., • A minimum of 3 years of experience in shipping, receiving or warehouse operations., • Demonstrated ability to manage incoming and outgoing shipments, including inspection, documentation, and tracking., • Experience working in a fast-paced environment with time-sensitive logistics., • Strong attention to detail and organizational skills., • Proficient in inventory management systems and basic computer applications (e.g., Microsoft Office, ERP software)., • Ability to lift up to 50 lbs and stand for extended periods, • Self-motivated with a strong work ethic and reliability, • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 7am - 3:30pm

Job Description Project Manager – Oracle ERP Stabilization Program Overview TES Staffing is actively seeking an experienced Project Manager to join a large-scale stabilization initiative at one of Rochester’s largest school districts. The district recently completed a multi-year Oracle ERP implementation that transformed its HR, Finance, Talent Management, and Budgeting operations. This 10-month engagement (with the possibility of extension for the right candidate) will focus on stabilizing post-go-live operations, ensuring seamless coordination across departments, and maintaining strong communication between leadership and project teams. This high-visibility role will report directly to the Program Advisor, and collaborate closely with C-level leadership, department heads, and multiple Project Managers. The ideal candidate thrives in a dynamic, complex environment and can bridge the gap between technology and business operations. Key Responsibilities Program & Project Coordination • Serve as the central liaison across departments (HR, Finance, Payroll, Talent Management, Budgeting, and ERP) and external implementation partners., • Coordinate and manage program-level governance processes, including Steering Committees, Leadership Updates, and Weekly Status Meetings., • Track milestones, action items, and deliverables across six active projects within the Oracle ERP stabilization program., • Develop and maintain weekly and monthly reports for senior leadership, including progress summaries, issue logs, and risk assessments., • Support the Program Advisor by preparing executive-level presentations and dashboards that summarize program health, budget status, and key performance indicators., • Act as a communication conduit between C-level executives, Operations Leads, and Project Managers to ensure accurate, timely updates flow both upward and downward., • Filter and prioritize issues, escalating only critical matters to leadership while empowering teams to resolve operational items efficiently., • Coordinate tracking and resolution of open defects and enhancement requests with functional and technical teams., • Support root cause analysis and lessons learned sessions to promote continuous improvement., • Bachelor’s degree in Business Administration, Information Systems, or related field., • 3-5+ years of experience in project or program management, preferably within large-scale ERP or digital transformation initiatives., • Experience with Oracle ERP (or SAP) systems required; Oracle Fusion Cloud experience highly desirable., • Strong understanding of AP/AR, HR, Payroll, and Budgeting processes., • PMP or equivalent project management certification preferred., • Highly organized, proactive, and detail-oriented with strong follow-through., • Excellent written and verbal communication skills; able to “translate” technical content for executive audiences., • Confident managing multiple stakeholders and workstreams in a fast-paced environment., • Capable of driving accountability without direct authority., • Salary Range: $105,000–$115,000 (commensurate with experience), • Duration: 10 months, with potential extension, • Location: On-site or hybrid (depending on district requirements) Company DescriptionTES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!TES Staffing is a regional staffing and HR services company. We work with Western NY's top companies to offer our applicants a wide variety of choices when looking for their next career opportunity. We will work with you to identify your strengths and try to match you up with the right job opening we have at that point in time. We look forward to working with you and cannot wait for you to create your future together!

Job Description We are seeking a hands-on and technically driven Quality Engineer to support and strengthen our Quality and Engineering team within a precision CNC machining environment serving the aerospace and defense industries. This role requires strong analytical and problem-solving skills, a proactive floor presence, and the ability to bridge theoretical quality principles with real-time production support. The successful candidate will play a key role in driving continuous improvement, ensuring compliance with industry standards (AS9100, ISO9001, NADCAP), and mentoring quality personnel. Key Responsibilities: • Maintain a strong presence on the production floor to support real-time resolution of quality issues., • Guide operators through inspection procedures and troubleshooting quality concerns on the spot., • Conduct and support various inspection types, including:, • First-Piece, In-Process, Final, and Open Plate Inspections, • Source Inspections and First Article Inspections (FAI), • Oversee CMM operations and programming using Zeiss Calypso (required)., • Utilize precision measuring tools (micrometers, calipers, height gauges, comparators) to validate dimensional tolerances, finishes, and part conformity per GD&T., • Lead and document non-conformances (NCR/INCR), perform root cause analyses (RCA) using tools like 5 Whys, Fishbone Diagrams, FMEA, and develop CAPAs., • Assist with preparing and maintaining PPAP, FAIR, and other aerospace quality documentation., • Audit and ensure adherence to company procedures, quality systems, and regulatory compliance., • Support process control development and collaborate with operations to improve quality at the source., • Specify and order inspection gauges and oversee calibration and gauge control requirements., • Create user-friendly visual aids and inspection documentation for operator use., • Education:, • Bachelor’s degree in engineering, manufacturing, or related field with 3–6 years of quality engineering experience, • OR associate degree with 5+ years of progressive quality experience and strong understanding of quality principles. (Must Have)Required Technical Skills & Experience: * • Expertise in AS9100 (or AS9100D), aerospace quality compliance standards, is required, NADCAP is preferred, and ISO 9001 compliance is required., • Prior experience in aerospace precision CNC machining environments, required., • Proficiency in GD&T interpretation and aerospace blueprint reading, required., • Zeiss Calypso CMM programming experience (required), • Experience with ERP/MRP systems (Epicor preferred), • Familiarity with CAD/CAM models and software like Mastercam or PartMaker, required., • Experience conducting and documenting First Article Inspections (FAI), PPAP, and FAIR, required., • Lean, Six Sigma, or Kaizen knowledge, is preferred.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job DescriptionSalary: $20 - $24/Hour Were looking for a temporary (through end of year) Production Operator I (Assembler) to join our growing team in West Henrietta, NY! Who we are: Safran Electronics & Defense is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. The Position: As a Production Operator, you will be responsible for the assembly of small or medium sized parts, fitting and/or adjustment of interrelated parts, repair of sub-assemblies and major assemblies. The Day to Day: • A Production Operator uses a wide range of hand and power tools, electrical or mechanical fixtures and gauges, standard measuring devices such as dial indicators, micrometers or voltmeters, drills, jigs, fixtures and light materials., • You will be responsible for inspection and testing of your own work and work of others., • May involve mechanical, optical and electrical/electronic operations. What you Bring to Safran: • High School Diploma or GED equivalent, • Minimum 5 years electronics assembly experience or equivalent with soldering experience on printed circuit boards, • Ability to solder/de-solder/rework assemblies/SMT experience, • IPC-610 & JStandard 001, • Ability to read and follow directions with heavy attention to detail, • Able to use ERP system to complete tasks as required, • Able to read color coded Process Details At Safran Electronics & Defense, youll combine passion for your job with a quality work environment adapted to a good life balance. Benefit from a variety of opportunities to shape the career path that suits you: our leaders and technical experts are there to support you from your integration and career development, in France and abroad. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job DescriptionFLOWER CITY GROUP is hiring a KIT PACKING COORDINATOR! This is a perfect opportunity for anyone with manufacturing experience who is looking to be part of a fun, successful, and growing company within the printing and packaging industry! We Hustle, We Own, We Learn, We Invent, and We Believe! Do you? If so, apply today! Summary/Objective: Responsible for using the monthly Kit Packing Work Queue to build a Daily Production Schedule for the Kit Packing Department. Essential Functions: • Print production labels for kit packing, • Print drop ship labels for kit packing, • Monitor inventory levels for label room (stock, ribbons), • Maintain customer inventory program, • Put inventory into locations after production run, • Enter Ship Requests in EPMS for customer orders (as a backup to PM), • Process Room call out orders in ShipStore, • Enter tracking information into Cross Cap orders, • Assist in Maintaining Cross Cap Inventory levels, • Assist PMs with small kit packing projects and sample kits as needed, • Serve as a backup for bin production, • Must be able to perform assigned duties at an efficient level., • Be able to work in a fast-paced environment while providing clear direction., • Ability to work with Microsoft office along with the ability to manipulate spreadsheets and data., • Ability to problem solve and to provide resolutions with little direction., • Regularly required to talk or hear., • Regularly required to sit, regular use of hands., • Frequently required to stand and walk., • Occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl and use foot/feet to operate machine., • Occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus., • Proven success in a warehouse or fulfillment environment, • Excellent verbal and communication skills, • A two-year degree or equivalent from a technical school Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job Description Job Title: Supply Chain Manager Location: Rochester, New York Job Type: Full-Time, Monday-Friday, 8:00 AM - 5:00 PM About Us Cirona Labs is a leading cannabis manufacturing facility specializing in high-quality extracts, vape cartridges, gummies, pre-rolls, beverages, and chocolate bars. We operate a state-of-the-art facility with a strong focus on efficiency, innovation, and compliance. As we continue to grow, we are seeking a detail-oriented Supply Chain Manager to oversee purchasing activities and optimize inventory management. Job Summary The Supply Chain Manager will be responsible for procurement, inventory management, and production coordination. The ideal candidate will ensure the efficient flow of materials and finished goods while optimizing costs and maintaining compliance with cGMP and New York State Cannabis Regulations. Key Responsibilities Procurement & Vendor Management • Maintain strong relationships with suppliers to ensure consistent quality and competitive pricing., • Monitor purchase orders, lead times, and deliveries to meet production demands., • Develop and implement procurement strategies that support production while controlling costs., • Provide procurement documentation to support audits and reporting., • Maintain accurate records of purchases, pricing, and supplier agreements using relevant software., • Ensure all materials meet quality and regulatory standards for cannabis manufacturing., • Use software tools (Canix, MS Office, Monday.com, GSuite) to maintain accurate inventory records for raw materials, work-in-progress (WIP), and finished goods., • Conduct regular cycle counts and reconcile discrepancies., • Define and optimize PAR levels to prevent shortages or overages., • Work with production and packaging teams to develop schedules aligned with demand forecasts., • Coordinate with operations to ensure smooth workflow and minimize downtime due to raw inventory issues., • Identify opportunities to reduce supply chain costs while maintaining quality standards., • Ensure all supply chain activities comply with state and federal cannabis regulations., • Bachelor's degree in Supply Chain Management, Business, or a related field preferred., • 3+ years of experience in supply chain, procurement, or logistics, ideally in cannabis, food, or pharmaceutical industries., • Strong understanding of inventory control and production planning processes., • Experience with ERP systems., • Ability to analyze data and implement process improvements., • Excellent organizational, problem-solving, and communication skills., • Ability to work cross-functionally across departments., • Health, dental, and vision insurance, • Paid time off and company holidays

Job DescriptionDescriptionPosition Overview Full-Time Career opportunity for a self-motivated professional to join the Finance team of a growing Mechanical Contractor specializing in Plumbing, HVAC and Fire Protection. Senior Accountant will partner with CFO on all financial affairs of the company including financial statements, analysis, systems development/maintenance/monitoring, credit, collections, sales tax, insurance, banking, audits, and internal controls. Responsibilities • Responsible for the preparation of financial statements and analysis of operations in accordance with generally accepted accounting principles, • Deliver financial modeling, budgeting, and forecasting analysis, • Analyze monthly financial performance. Communicate with senior management, providing executive-level financial results to support informed decision-making, • Track and report key performance indicators to monitor financial health and operational efficiency., • Responsible for the management of company’s fixed assets, • Oversee credit and collections, • Collaborate cross-functionally with AP/AR/Cash & Payroll teams, • Perform account review and reconciliations, • Responsible for general ledger maintenance and support, • Ensures the proper classification and accuracy of company expenditures, • Develop, implement, maintain and enforce company procedures and controls, • Participate in the research, development and implementation of new technologies, processes and procedures Qualifications· BA/BS Degree in Accounting/Finance· Minimum 5 years progressive financial accounting/financial analysis including general and cost accounting / job costing, accounts payable, accounts receivable, payroll, and familiarity with ERP platforms· Expert communicator and problem solver· Proficiency in Microsoft Office Benefits • Competitive pay, • Comprehensive health insurance (including dental and vision), • Health Saving Account with company contribution, • Company Paid Life Insurance, • 401(k) plan with company matching, • Generous paid time off, • Paid Holidays, • Bonus Program, • Short Term/Long Term Disability

Job Description Shape the Future with us at Framing Technology Jan 1, 2026 HIRE DATE At Framing Technology, we design and assemble aluminum extrusion systems and their related components — building the frameworks that power innovation. As our company continues to grow, we’re looking for team members who can inspire, drive excellence, and keep our standards high. If you’re ready to be part of a collaborative, forward-thinking environment, this is where your next chapter begins. As an Account Executive at Framing Technology Inc., you will play a key role in both maintaining existing client relationships and driving new business through proactive outbound sales efforts. Reporting to the Sales Manager, this position combines the responsibilities of sales fulfillment, customer service, and strategic account development. You will work with internal teams and systems (CRM, ERP) to ensure customer satisfaction, order accuracy, and company profitability while identifying and pursuing new sales opportunities. Responsibilities: • Serve as a main point of contact for assigned customer accounts via phone, email, in-person, and e-commerce., • Conduct outbound sales efforts including cold calls, prospect follow-ups, and outreach to dormant or past accounts to generate new leads and sales opportunities., • Develop and maintain a strong sales pipeline through research, prospecting, and consistent follow-up., • Create and manage customer quotes and orders in CRM and ERP systems., • Enter and maintain accurate customer data, documentation, and project information., • Follow up on quotes, ensuring timely order conversion and customer satisfaction., • Interpret customer technical drawings and specs in collaboration with engineering to support quoting and project planning., • Report weekly sales metrics, forecasts, and outbound activity summaries (calls, emails, social media outreach) to the Sales Manager., • Handle all customer inquiries and returns in a timely, solution-focused manner., • Coordinate with engineering and production teams to meet customer deadlines and project requirements., • Ensure accuracy and completeness of printed documents for warehouse processing., • Stay informed on company policies, products, and pricing updates., • High school diploma required; associate or bachelor's degree preferred., • Previous experience in sales, account management, or customer service (manufacturing/industrial sector a plus)., • Excellent verbal and written communication skills with strong interpersonal and customer service abilities., • Confident in conducting outbound calls and initiating new customer relationships., • Organized and self-motivated with the ability to manage multiple tasks and deadlines independently., • Proficient in Microsoft Office, CRM systems, ERP software, and cloud-based platforms (Google Workspace, etc.)., • Strong problem-solving and critical thinking skills. Base salary * Account executives are eligible to earn additional compensation each quarter through performance-based incentives tied to core customer growth, total revenue, and new customer acquisition. * To qualify for quarterly incentives and commissions, all account executives must meet baseline activity levels which include outbound activity, quote and lead follow-up, and CRM/ERP compliance. Benefits: • Health, dental, and vision insurance, • 4% 401K match, • No-cost short-term disability and life insurance, • Generous sick and vacation plans #hc201589

Job Description Allient - Rochester (formerly ORMEC Systems, Inc.), a subsidiary of Allient Inc., specializing in motion control products and engineering services, including motion controllers, servo drives, motors, and electro-mechanical motion control and automation solutions is currently seeking a highly skilled and ambitious engineering leader to join our Rochester, New York team! Allient Rochester’s Director of Engineering is a key leadership role responsible for driving engineering innovation, program execution, and team development. This is a hands-on role that manages a team of hardware/power electronics, firmware/software, mechanical, and control engineers, technicians and technical professionals, providing both strategic oversight and hands-on technical guidance in an entrepreneurial/small company environment where you will also have the opportunity to contribute directly to the design of our next generation of motion control products. With a deep understanding of power electronics, embedded control systems, electro-mechanical system design, mechanical packaging, and manufacturing processes, the Director of Engineering will play a critical role in advancing Allient’s technology and product roadmap, ensuring that product development aligns with business objectives and customer needs. This position is part of the leadership team, actively contributing to company-wide strategic planning, business budget accountability, and financial decision-making in support of corporate goals. Apply now! Responsibilities: • Serve as a senior leader in strategic planning discussions, providing engineering insights that impact corporate decision-making and future growth initiatives., • Contribute to business budget planning, ensuring alignment between engineering investments, product development costs, and overall company financial objectives., • Lead and develop the engineering team, setting clear objectives, fostering innovation, and mentoring engineers to drive technical excellence., • Establish departmental standards, priorities, and output expectations, balancing strategic oversight and hands-on leadership., • Provide hands-on guidance to the team in the design, development, and testing of motion control products (e.g., servo drives), electro-mechanical subsystems (e.g., stages/actuators), and integrated solutions (e.g., UL-508 box build with Codesys application programming services) while ensuring manufacturability, reliability, and performance. Your expertise in power electronics and embedded systems design in motion control applications will be crucial in every step of the process., • Drive continuous improvement initiatives, optimizing engineering efficiency, product performance, and cost-effectiveness., • Oversee new product development and introduction (NPD/NPI), utilizing Stage-Gate methodology to ensure disciplined execution., • Assign and manage engineering project workflows, ensuring projects are completed on time, within budget, and meeting customer expectations., • Define and track engineering KPIs, including time-to-market, cost efficiency, and product/technology performance metrics., • Collaborate with sales, marketing, and manufacturing teams to align product development with customer requirements and market trends., • Serve as a subject matter expert in power electronics and embedded control systems engineering, providing guidance and individual contributions on design, simulation tools, and mechanical implementation., • Conduct detailed circuit design, simulation, and analysis to optimize product performance, including power and control/logic electronics., • Develop and implement innovative system- and component-level control algorithms for a variety of power electronics applications., • Evaluate circuit topologies and circuit components through simulation and analysis., • Develop detailed power and control electronics models to investigate and verify the algorithm’s robustness and performance across the entire operating space., • Support failure analysis, design verification, and manufacturing work instructions, ensuring a seamless transition from prototype to production., • Troubleshoot and resolve complex electrical, embedded software, mechanical, and system level issues in motion control systems and applications., • Develop and implement testing protocols to validate the functionality and reliability of designs., • Participate in engineering builds and full-rate production when necessary to validate designs and quality standards., • Provide cost estimates for new products and redesigns, factoring in engineering resources, labor, and materials., • Work closely with operations, quality, and supply chain teams to optimize manufacturing processes and supplier partnerships., • Develop risk management frameworks to proactively identify and mitigate risks in design, fabrication, and testing, • Actively contribute to customer and supplier engagements, supporting technical sales discussions and problem resolution., • Recruit, train, and mentor engineering team members, building a high-performing culture that values innovation, collaboration, and continuous improvement., • Lead succession planning and employee development initiatives to strengthen technical capabilities within the team., • Perform other duties as assigned. Minimum Qualifications: • Bachelor’s degree in Electrical Engineering, or a related field (Master’s preferred)., • 10-15 years of power electronics and embedded controls experience, with at least 5 years in a leadership role., • Strong knowledge of power and control electronics, embedded software, and electro-mechanical design principles applied in advanced industrial and medical applications., • Experience in hands-on leadership roles, combining direct application of subject matter expertise to product development initiatives with coaching, development and leadership of cross-functional teams., • Proven track record of designing and optimizing DC/DC converters, inverters, and switch-mode power supplies (SMPS)., • Strong understanding of thermal management, EMI/EMC compliance, and safety protocols for high-power systems., • Familiarity with PLCs, embedded controllers, motors, and electromechanical systems and applications., • Familiarity with FPGA design., • Proficiency in Microsoft Office Applications; primarily MS Excel, Word and Power Point., • Expertise in PLM systems (e.g., BlueStar) and engineering aspects of ERP systems (e.g., Microsoft Dynamics 365) to manage engineering changes, deviations, BOM structuring, etc., • Proficiency with design and simulation tools (e.g., Altium Designer, MATLAB/Simulink, SPICE, LTSpice)., • Experience with project management, product development and collaboration tools (e.g., Microsoft Project, Jira)., • Knowledge of industry standards (IEC, UL, CSA) and safety requirements. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionSalary: $80,000-110,000 We're looking for a Full Time, FP & A Manager to join our talented Finance team at Brothers International in Rochester, NY. Position Summary: As the Financial Planning and Analysis Manager, you'll be responsible for providing data-driven insights to support the organization's financial and operational strategies and decisions. Working directly with the VP of Finance, the FP&A Manager develops, designs, and produces management reports, analysis, and presentations, partnering with the business to drive growth. The Day to Day: • Through data driven analysis, support management with key decisions regarding product and customer level sales review, pricing, product-level costing, purchasing, sales team incentive plans, inventory control and capital allocation decisions., • Assist in the development of annual budgets, long-range plans, and rolling forecasts in collaboration with various departments and ensure alignment with organizational goals., • Create and manage detailed reporting on sales and backlog activity at a customer, product, and contract level, including volume and margin analysis., • Produce monthly and quarterly financial and Board meeting reporting, including financial reporting against budget and prior year results., • Implement and report on operational and financial reporting, KPIs, procedures and controls., • Investigate and explain variances between budgeted, actual, and prior year financial results and provide strategic recommendations to address discrepancies., • Conduct detailed ad-hoc analyses to identify cost-saving opportunities and improve operational efficiency., • Support certain internal value creation and acquisition integration projects, partnering cross-functionally to drive process improvement, increased productivity, and earnings growth., • Ensure accuracy and integrity of information stored in systems, enabling a single source of truth. Minimum Qualifications: • BS in Finance or related field required. Master's Degree a plus!, • Minimum of 5+ years of related work experience in accounting and/or financial reporting, • Prior experience in a private equity backed company a plus. Knowledge, Skills, & Abilities: • Proven experience in financial modeling, analysis, and strategic financial planning, • Advanced proficiency in financial software, ERP systems, and data analytics tools, • Excellent communication and presentation skills, with the ability to summarize financial and operational insights to drive action and accountability, • Strong leadership, problem-solving, and critical thinking skills, • Expert excel skills, • Prior experience with NetSuite a plus About Brothers International Food Holdings, LLC: At Brothers International, we are passionate about creating high-quality food products that enrich lives and bring people together.Our Ingredients division supplies top-quality fruit and fruit juice concentrates to a number of Fortune 100 food companies. Our Consumer Packaged Goods (CPG) division includes Brothers-All-Natural, the #1 Freeze-Dried Snack Brand, and also produces private label freeze-dried fruit snacks for some of the leading retailers in the US. Headquartered in Rochester, NY, with offices in Florida and China, we are an innovative global leader in the food industry.We take pride in our commitment to excellence, sustainability, and the well-being of our communities. If you are interested in becoming part of a fast-growing, dynamic team environment, read on! Why Brothers International? • Innovation:Be part of a company that values creativity and encourages innovation in the ever-evolving food industry., • Team Collaboration:Join a collaborative work environment where your ideas and contributions are recognized and celebrated., • Global Impact:Contribute to a company with a global presence, making a difference in the lives of people worldwide through our diverse range of food products. Brothers International is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, pregnancy, disability, age, veteran status, or other characteristics.

Job DescriptionSalary: $110K to $130K We are seeking an experienced and strategic Applications Engineering Manager to lead a high-performing team of solution architects and engineers focused on delivering innovative, reliable, and scalable solutions. This leadership role requires strong technical expertise, people management skills, and a customer-focused mindset to ensure seamless integration of our technologies into client systems and workflows. The Day to Day: • Partner with product management, sales, support, and core engineering to define application requirements and customer needs., • Lead the proposal preparation and contribute to the financial estimate together with Sales and R&D, • Serve as a technical liaison with customers and internal stakeholders, translating business requirements into functional solutions., • Provide insights and feedback to influence product roadmap and feature development., • Work directly with clients to understand their environment and recommend integration strategies., • Support pre-sales activities, proof-of-concepts (POCs), and post-deployment technical troubleshooting as needed., • Advocate for the voice of the customer within engineering and product roadmap discussions., • Seen as a respected technical expert for assigned Business line and is expected to work closely with current and prospective customers., • Lead, mentor, and develop a team of applications engineers, fostering growth in both technical and soft skills., • Establish clear goals, conduct regular performance reviews, and promote a culture of excellence and accountability., • Manage application engineering projects from inception to completion, ensuring timely delivery and technical quality., • Oversee solution design, prototyping, validation, and customer deployment in coordination with product and engineering teams., • Ensure best practices in pre-sales support, RFQ/RFP support, product demonstrations, product training (internal and external), 2nd tier product technical support, product requirements development and reviews, trade show support, and conference/webinar presentations. What you bring to Safran: • Bachelors degree in computer science, Electrical Engineering, or related field; advanced degree preferred., • 7+ years of experience in applications engineering, technical solutions, or software engineering., • 3+ years in a people management or technical leadership role., • Experience working with international teams and customers exhibiting sensitivity to regional requirements and customs., • Knowledge of system architecture, integration methodologies, and customer onboarding strategies., • Proficient in-service offerings, selling and pricing services based on custom needs, • Experience in industries such as aerospace, position navigation and timing, networking and/or communications., • Familiarity with tools and technologies such as Python, C/C++, Linux, cloud platforms (AWS/Azure/GCP), and DevOps practices., • Hand-on experience with ERP systems and CRM tools such as Oracle, SAP, MS Dynamics 365, SFDC, Zendesk and Zoho, • Proven experience working with complex systems in embedded, hardware/software, or enterprise environments.

Job Description Title Senior Thin Film Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: We are seeking a highly experienced and innovative Senior Thin Film Coating Engineer to lead the design, development, and optimization of advanced optical coatings for precision optics applications. This role is pivotal in supporting high-performance imaging systems, spectroscopy, aerospace, defense, and semiconductor technologies. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: * Design and optimize complex thin film coatings (e.g., AR, beam splitters, bandpass filters) using industry-standard software (TFCalc, Macleod, FilmStar). * Lead development of coating processes using PVD technologies including magnetron sputtering, ion beam sputtering, and electron beam evaporation. * Collaborate with cross-functional teams to translate customer specifications into manufacturable coating solutions. * Perform spectral and interferometric measurements using spectrophotometers and other metrology tools. * Develop and maintain process documentation including FMEA, control plans, and PPAPs. * Troubleshoot coating defects and implement root cause corrective actions. * Mentor junior engineers and technicians; provide technical leadership across coating operations. * Support continuous improvement initiatives using Six Sigma, SPC, and Lean methodologies. * Interface with customers to present technical solutions and ensure product compliance. * Participate in Material Review Board (MRB) activities and disposition of discrepant materials. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics. 8–10 years of experience in optical thin film coating design and manufacturing. * Deep understanding of high vacuum systems, deposition physics, and thin film characterization. * Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. * Experience in low-volume, high-mix production environments is a plus. • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs, • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. 7am - 3:30pm

Job Description The Operations Director is a key member of the Corporate Operations leadership team responsible for the daily activities of the firm’s corporate operations team in support of the company’s objectives. This individual will oversee and align various operational centers as directed by the COO including Real Estate and Facilities, Practice Technology, Safety, Fleet & Compliance, Project Management training, and Corporate Operations, including business combination integrations. This position oversees strategic and operational direction, business processes, and staff resource management for each of these areas. This position requires continuous coordination with the other Shared Services directors and managers as well as the IT and Security Department Managers regarding shared corporate processes, procedures, and initiatives. Essential Duties & Responsibilities: Real Estate/Facilities • Facilitate and support the Corporate Real Estate Manager with:, • Lease negotiations and procurement., • Maintain and monitor seating capacities across the LaBella office footprint. Coordinate and balance seating with new hires and terminations. Maintain contact with office managers regarding office conditions and required maintenance,, • Office space maintenance and security. Contact landlords as necessary to remedy situations that arise., • Build out new and existing LaBella office spaces, including coordination of design, bidding, and construction. Manage furniture procurement., • Office emergency management. Practice Technology • Facilitate and support the Corporate Quality Manager with:, • Quality Management and Project Management Programs, • QMS (Quality Management Systems) Process and Procedure Management, • Leading the QMS and Project Management Committees, • Supporting the Corporate Project Management Training Program and Project Manager Support including attendance at PM Committee meetings Safety Program • Facilitate and support the Corporate Safety Manager with:, • Corporate Safety program, ensuring alignment of safety strategy and initiatives with company objectives, and identification and mitigation of risk levels across various divisions and functions, • Coordination with Division representatives for jobsite task hazard analyses, Health, and Safety plans, and required PPE, • Coordination with the HR team and Divisions on medical monitoring, Drug and Alcohol testing, and other employee job functions Fleet and Compliance • Facilitate and support the Fleet & Compliance Manager with the Corporate Fleet & Compliance Programs ensuring compliance with all regulatory and contractual obligations, • Facilitate and coordinate strategic fleet management objectives balancing company risk, costs, efficiency, and safety. This includes new, traded, leased, and rented vehicles. Corporate Operations: • Facilitate and support the Senior Operations Manager with:, • Operational systems, processes, and initiatives that enable innovative, cost effective, efficient work across the company including equipment and supply management, policy development and implementation, and process definition/Standard Operating Procedures., • Software Management including procurement, tracking issuance, renewals, and reconciliation in coordination with LaBella’s Technology and Shared Services Departments. This includes but is not limited to the corporate intranet, learning management system, Deltek ERP, and travel management software., • Development of Operations content and issuance on the corporate intranet and other platforms., • Represent Operations in integration of business combination entities, ensuring timely, welcoming, and effective integration of systems, processes, and employees., • Emergency Alert System Management., • Vendor Qualifications – support Marketing with completion of RFP/RFQ questionnaires., • Coordination with QMS and Technology Departments for network project folder structure. The Operations Director will also: • Lead the Operations team annual labor, expense, and capital budgeting process, • Monitor staffing and workload for Operations Team, • Lead the Operations Team in Crisis Management, Business Continuity, and Corporate Social Responsibility (CSR) programs. Education & Experience • 4 Year Degree in a A/E related industry field, or equivalent relevant experience., • Minimum of 15 years of progressive leadership experience in the A/E industry, including managing multidisciplinary teams and large-scale projects., • Demonstrated experience in mergers & acquisitions in the A/E industry., • Proven track record in operational leadership within a consulting or professional services firm. Skills & Competencies • Proven experience in leading and managing teams as well as supervising several team members simultaneously., • Strong understanding of architectural and engineering workflows and business models., • Exceptional leadership, communication, and organizational skills; ability to influence and impact others across functions and disciplines, and at all levels., • Financial acumen and ability to interpret P&L, WIP, and KPIs., • Adept in technology and tools relevant to the A/E industry (e.g., Deltek, Newforma, BIM software, ERP systems). Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Join one of Rochester's Top Workplaces! We would love to welcome you to the team! GreenSpark Solar creates fiercely local, cost-effective, clean energy options in the Greater Rochester Community. We feel a huge responsibility to succeed at GreenSpark. As a B Corporation, success is directly tied to honoring our triple bottom line of commitments to people (our employees and their families, our Customers and residents of the communities where we do business), planet (our local and the broader global environment) and profits (providing capital to grow, revenue to share among our employees, and a return to our investors). This is important work, and we have fun doing it. Our values are reflected in our workplace — our office is directly powered by onsite wind turbines and solar panels, our fleet includes all-electric and hybrid vehicles, dogs roam the office, and we strive to be an unabashedly inclusive, diverse workplace. Our Core Values Find Joy Keep it Real Work Together Believe in People Be a Leader GreenSpark Solar is seeking an experienced and dynamic Commercial Project Manager to join our team! In this pivotal role, you will lead and oversee the full lifecycle of commercial installation projects. Your responsibilities will encompass everything from scope development and contracting to engineering, construction, and project close-out/commissioning, ensuring alignment with stakeholder commitments and company financial goals. You will report directly to the Manager of Commercial Project Management. The ideal candidate will have extensive project management experience and a solid understanding of the solar industry. Key Responsibilities: * Project Planning: Direct and manage all project personnel, subcontractors, and suppliers from initial planning through to project close-out. Ensure seamless coordination and execution of project phases. * Quality Control & Progress Reporting: Schedule and conduct site inspections to monitor quality and progress before, during, and after construction. Provide detailed progress reports and address any issues promptly. * Performance Tracking: Track and measure project progress, timelines, and milestones against established plans and budgets. Ensure that all project deliverables are met within scope and financial parameters. * Vendor & Subcontractor Management: Manage and coordinate multiple vendors, subcontractors, and engineers across various projects simultaneously, ensuring efficient project execution and adherence to schedules. * Risk Management: Proactively identify, assess, and document project risks. Develop and implement contingency plans and manage any changes to scope, schedule, and cost effectively. * Safety & Quality Assurance: Promote and uphold company safety and quality standards throughout the project lifecycle. Document and track compliance to ensure high standards are consistently met. * Client Relations: Deliver exceptional project management services in alignment with client expectations. Strengthen and maintain strong client relationships and manage stakeholder needs effectively. * Task Prioritization: Prioritize and delegate tasks across multiple projects, ensuring timely completion and successful project delivery. Education & Qualifications: * Minimum of 3 years of relevant experience preferred, including at least 2 years in project management. A strong background in Engineering, Procurement, and Contracting (EPC) is essential, with a minimum of 3 years of solar industry experience (strongly preferred). * Bachelor’s degree or equivalent experience preferred. * NABCEP Certified PV Installation Professional or equivalent (strongly preferred). * Project Management Professional (PMP) certification (strongly preferred). Desired Skills & Abilities: * Enterprising Spirit: Proactive and able to take initiative. Capable of making independent, high-level decisions and taking calculated risks to drive project success. * Investigative Mindset: Strong problem-solving skills with the ability to navigate complex project situations, utility requirements, and site conditions while adhering to strict budgets and timelines. Proficient in reviewing multi-trade construction drawings and understanding construction best practices. * Organizational Skills: Exceptional organizational abilities with a focus on maintaining project budgets, schedules, and documentation. Detail-oriented with a process-driven approach. * Communication: Excellent written and verbal communication skills, with the ability to effectively convey information and collaborate with various stakeholders. * Technical Proficiency: Proficient in Microsoft Word, Excel, and Project. Familiarity with Netsuite or equivalent ERP systems is a plus. Work Environment: * This role is primarily sedentary and it is estimated 75% of this position will be performed remotely, and 25% in person. It is expected you will visit job sites 1-2x per month. Perks & Benefits: * Annual salary range of $70,000-120,000+ annually * Level I - $70,000-$84,000 * Level II - $84,000 - $105,000 * Level III - $105,000 - $120,000+ * Weekly pay * Quarterly bonus potential based on company performance * 401(k) profit sharing plan * Comprehensive Medical & Dental Insurance * GreenSpark covers 75% of health insurance premiums, health deductible expenses, and dental premiums for both employees and their families * Flexible work schedule and hybrid work arrangements. * Three weeks (120 hours) of vacation time, plus flexible paid time off (PTO) after the first year. * 12 days (96 hours) of paid sick leave * Eight paid company-wide closure days * Wellness Week: Enjoy a paid collective week off for the entire company * Company-issued cell phone or reimbursement * Opportunities for professional growth through training and development programs * Annual company retreat to foster team building and company culture * Access to Employee Assistance Program (EAP) for confidential support and counseling services * Pet-friendly work environment If you have project management, electrical, and/or solar experience and want to work at an amazing company then apply today! GreenSpark Solar is an equal opportunity employer committed to diversity in the workplace. We do not tolerate harassment or discrimination of any kind and seek to remove barriers and increase opportunities, access, and advancement for all people. Do not let historical barriers prevent you from Jumping on this life changing opportunity–reachout and ask questions if you have them–we are here!

Job Description Arnold Magnetic Technologies is a global leader in the engineering and manufacturing of high-performance permanent magnets, magnetic assemblies, precision thin metals, and engineered materials. With more than 125 years of innovation, Arnold serves a wide range of industries, including aerospace, defense, medical, energy, and automotive. The company partners with customers worldwide to deliver mission-critical solutions that enable advanced technologies and drive progress. Arnold is seeking a Business Applications Manager to lead the ongoing deployment, improvement, and integration of our business applications. This hands-on leader will be responsible for planning, coordinating, and delivering technology solutions that support efficient operations and drive business growth. The role combines strategic leadership with technical execution. The Business Applications Manager will oversee projects, budgets, and vendors while also contributing directly through application configuration, database work, and code development. By partnering across the organization, this role ensures that our systems are aligned with business needs, optimized, and delivering measurable value. The ideal candidate is a versatile manager with strong development skills, experience leading projects, and a proven ability to balance day-to-day execution with long-term vision. Key Responsibilities Team Leadership & Management • Lead and mentor a team of application developers, application support, and data specialists., • Conduct performance reviews, set professional growth goals, and maintain accountability through structured tracking., • Foster a collaborative, transparent, and continuous improvement culture., • Manage external partners and consultants by defining project scope, setting clear expectations, and holding them accountable for deliverables, timelines, and quality of work.Business Systems Improvements, Rollout, and Support, • Plan and oversee improvements, rollouts, and integrations for enterprise applications., • Partner with stakeholders to ensure new system implementations align with business priorities and deliver measurable outcomes., • Provide hands-on support for application configuration, integrations, and custom development when needed., • Reduce technical debt by consolidating legacy systems and optimizing the application portfolio., • Oversee the application support process, ensuring requests are managed through the ticketing system and resolved effectively. Coordinate with the Service Desk team on training and escalation from tier 1 issues.AI & Automation Initiatives, • Lead AI initiatives, including focus groups, training, pilot projects, and tool adoption., • Evaluate and implement AI-enabled solutions for process automation across functions., • Identify opportunities to enhance efficiency and decision-making through AI.Data & Analytics Enablement, • Implement and manage a modern data lakehouse architecture to centralize and govern enterprise data., • Build and support reporting solutions that deliver accurate, timely, and accessible insights., • Drive self-service reporting capabilities through BI tools, empowering teams to access and act on data., • Ensure data integrity, security, and alignment with business strategy.Agile & Project Delivery, • Implement and refine Agile practices, facilitating sprint planning, daily standups, retrospectives, and backlog prioritization., • Collaborate with stakeholders to align priorities, define requirements, and deliver incremental value., • Champion Agile practices across the organization to drive adoption and efficiency.Strategic Alignment & Stakeholder Engagement, • Partner with senior leadership to align business applications, AI initiatives, and data strategy with organizational goals., • Translate strategic objectives into actionable roadmaps for system rollouts, integrations, and enhancements., • Manage vendor selection and performance to ensure optimal return on technology investments.Standards, Governance & Budget Oversight, • Establish and enforce development and governance standards, including CI/CD, code reviews, and documentation practices., • Manage budgets, resource allocation, and vendor contracts to ensure cost efficiency and compliance. Required • Bachelor’s degree in Computer Science, Information Systems, Business, or a related field required., • Proven experience managing and delivering enterprise application rollouts, integrations, or major upgrades., • Strong knowledge of application development practices, databases, and modern integration approaches., • Demonstrated hands-on technical ability — configuring systems, writing code, or managing data., • Experience leading projects using Agile methodologies (Scrum, Kanban) with measurable results., • Strong leadership and people-management skills, with experience guiding cross-functional teams., • Excellent problem-solving, communication, and stakeholder management abilities., • U.S. Citizenship required due to access to export-controlled technology and data under ITAR, EAR, and FCI/CUI regulations.Preferred, • Experience implementing core business systems like ERP, CRM, FP&A, HRIS, or QMS systems in a manufacturing or industrial environment., • Exposure to AI initiatives such as automation, analytics, or AI-driven business process improvements., • Experience leading data architecture or BI initiatives (data lakes, or self-service reporting)., • Familiarity with cloud platforms (Azure or AWS) and modern DevOps/CI/CD practices., • Professional certifications (e.g., PMP, PMI-ACP, CSM, ITIL, Microsoft, or AI-related certs)., • Full-time, Monday–Friday, with flexibility to occasionally support critical system go-lives or urgent production issues outside of standard hours., • Primarily office-based role with extended periods of computer use and meetings., • Some travel required for periodic visits to other sites, vendor offices, or industry events., • May occasionally require entering manufacturing areas where personal protective equipment (PPE), including safety shoes and eye protection, must be worn in compliance with company safety policies. Hearing protection is available if desired., • The employee may occasionally be required to lift and/or move up to 25 pounds. Arnold Magnetic Technologies is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law. #ROC

Job Description Our client is a precision aerospace manufacturer specializing in CNC-machined components that meet the highest standards of quality and reliability. Our team produces mission-critical parts for the aerospace and defense industry, operating in a fast-paced, AS9100-certified environment where accuracy, consistency, and safety are paramount. First Shift 7a-4:30p Second shift 3:45-12:30a OT as needed Position Overview: The CNC Operator is responsible for operating and monitoring CNC milling and turning machines to produce high-precision aerospace components. This role ensures that production runs are executed safely, efficiently, and to exact specifications while meeting strict quality and regulatory standards. Key Responsibilities: • Load raw materials, bar stock, or billets into CNC machines., • Operate CNC lathes, mills, and/or grinders following work instructions., • Monitor machine operations to detect issues such as tool wear, dimensional drift, or abnormal sounds., • Perform in-process inspections using micrometers, calipers, height gauges, bore gauges, and other precision measuring equipment., • Document inspection results in accordance with quality requirements., • Make minor offsets or adjustments to maintain tolerance., • Read and interpret blueprints, work orders, and travelers to ensure compliance with engineering specifications., • Adhere to all safety protocols and maintain a clean, organized work area., • Collaborate with setup machinists, quality inspectors, and supervisors to ensure smooth production flow., • Prior experience operating and inspecting parts using a CNC (Mill/Turn/Lathe), required., • Familiarity with ERP/MRP systems for tracking jobs & MS Office (Word/Excel), required., • Ability to read and interpret engineering drawings and basic Geometric Dimensions & Tolerances, required. Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Sheet Metal Process Engineer Reports to: Fabrication Director Your Role: The Sheet Metal Process Engineer is responsible for shepherding products through the production process, while ensuring customer delivery and quality requirements are satisfied. This high impact role requires innovative thinking, a high sense of urgency and collaborating in a cross-functional environment. Responsibilities Include: • Develop and validate manufacturing processes for new products, including tooling, fixtures, and assembly methods., • Participate in design reviews to ensure manufacturability and cost-effectiveness., • Interpret and clarify engineering drawings, BOMs, and specifications for internal teams and external suppliers., • Serve as the primary point of contact for technical questions related to the TDP., • Ensure documentation is complete, accurate, and production-ready., • Define and optimize processes., • Support root cause analysis and corrective actions for production issues., • Implement lean manufacturing principles and continuous improvement initiatives., • Work closely with procurement, quality, and supplier engineering teams to ensure alignment on technical requirements., • Collaborate with design and R&D teams to ensure manufacturability of new products., • 5+ years hands-on experience of bending, forming, welding and finishing processes., • .AS/BS in relevant technical field., • Strong understanding of NPI processes and design-for-manufacturing (DFM) principles., • Familiarity with ERP and PLM systems., • Experience working with suppliers and contract manufacturers., • Proficiency in CAD software (e.g., SolidWorks) and manufacturing systems (e.g., PDM, Autodesk Vault, SW Composer)., • Knowledgeable in programming., • Proficiency in interpreting engineering drawings, GD&T, and BOMs., • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision ProductsA reasonable estimate of the compensation range for this position is $60,000.00 - $90,000.00 per year. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR UUQJBe6ntM

Job Description Title Quality Control Technician Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Technician plays a critical role in ensuring the integrity and performance of precision optical components and assemblies. This position supports the implementation and maintenance of the ISO 9001 Quality Management System and collaborates with cross-functional teams to uphold rigorous quality standards throughout the manufacturing lifecycle. The technician will perform inspections, analyze data, and contribute to continuous improvement initiatives to enhance product quality and customer satisfaction. You Will: • Perform visual, dimensional, and functional inspections of incoming materials, in-process components, and finished products using precision measurement tools (e.g., micrometers, calipers, interferometers)., • Conduct First Article Inspections (FAI), Receiving Inspections, In-Process Inspections, and Final Product Inspections., • Verify product conformance to specifications and customer requirements prior to shipment., • Investigate non-conforming materials and products to determine root causes., • Collect, analyze, and interpret statistical data from manufacturing processes to identify trends and anomalies., • Generate quality reports and dashboards to communicate findings to engineering and production teams., • Support shipment readiness with data validation, traceability checks, and conformance verification., • Propose and implement corrective and preventive actions (CAPA) in collaboration with engineering and production teams., • Maintain and update quality documentation, procedures, and records in compliance with regulatory and internal standards., • Support internal and external audits with documentation and process evidence., • Train and mentor new employees in inspection techniques, quality standards, and proper use of measurement tools to ensure consistency and accuracy across the team., • Perform additional tasks and responsibilities as directed by management to support departmental goals, continuous improvement initiatives, or cross-functional projects., • May work in cleanroom environments and low-light conditions to inspect sensitive optical components. You Have: • High school diploma/GED Required, associate degree or technical certification in optics, engineering, manufacturing, or related field preferred., • Minimum of 3 years’ experience in quality assurance or inspection in a manufacturing environment, ideally in optics or precision components., • Proficiency in using precision measurement instruments and inspection equipment., • Familiarity with ISO 9001 standards and quality system documentation., • Strong analytical skills and attention to detail., • Ability to read and interpret engineering drawings, specifications, and work instructions., • Experience with statistical process control (SPC) and root cause analysis methodologies., • Basic computer skills (Excel, Word, ERP systems); experience with quality software a plus., • Effective communication and teamwork skills. You are: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude., • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match., • Wellness: Health, dental, vision & life insurance., • Balance: 11 paid holidays, generous paid vacation and sick -time., • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. A Shift Schedule: 7am - 3:30pm

Job Description Insero Talent Solutions has partnered with a premier general construction company based in Rochester to recruit a Corporate Controller. Company Summary: Our client is a renowned general contractor with over 100 years of excellence and clients across the US. They pride themselves on continuing to live their core values and providing world-class construction services, including pre-construction, construction, design-build, self-perform, development, and facility services along with a constantly growing portfolio. Position Summary: The Corporate Controller is a key business partner and financial leader responsible for overseeing the company's accounting operations across construction projects and entities. As Corporate Controller, you will ensure the integrity of financial reporting, effective internal controls, and efficient treasury operations. The Corporate Controller partners closely with operations, project management, shared service, and executive leadership to deliver accurate, timely, and insightful financial information that supports strategic decision-making. Key Responsibilities: Corporate Accounting and Financial Reporting: • Lead all aspects of general ledger management, consolidation, and month-end/quarter end/year end close processes across multiple entities., • Oversee and manage the preparation and review of consolidated financial statements in compliance with GAAP and company policies., • Develop and maintain internal controls to ensure the accuracy and reliability of financial information., • Ensure the preparation and accuracy of all financial reconciliations., • Manage the preparation and completeness of all Joint Venture and subsidiary accounting operations., • Preparation of the annual overhead budget and monthly management of overhead spend., • Coordinate annual audits and manage relationships with external auditors and tax advisors., • Oversee all project accounting functions, including job cost tracking, billing, revenue recognition, and project margin analysis., • Partner with project managers and operations teams to review budgets, forecasts, and performance against plan., • Standardize project accounting practices across divisions and subsidiaries to ensure consistency and transparency., • Manage Work-in-Progress (WIP) reporting and ensure accurate percentage-of-completion accounting., • Assist CFO in subcontractor pre-qualification., • Manage corporate treasury operations including cash flow forecasting, liquidity management, bank relationships, and daily banking activities., • Oversee all state sales tax reporting and internal allocations such as equipment and insurance., • Monitor daily cash positions and intercompany funding between entities., • Oversee corporate credit and fuel card program administration., • Optimize banking structures and monitor debt covenants and compliance., • Manage, mentor, and develop a high-performing accounting team, including corporate and project accounting staff., • Establish clear performance expectations, training plans, and professional growth paths., • Foster, maintain, and improve collaboration between finance, operations, and share service departments., • Accuracy and timeliness of consolidated financial reporting., • Audit results and internal control compliance., • Project profitability visibility and WIP reporting accuracy., • Treasury and cash flow management effectiveness., • Responsible for travel as business dictates and ability to accommodate a flexible schedule to meet workload needs., • Bachelor's degree in Accounting, Finance, or related field required, Master's or MBA preferred., • CPA required (active license preferred)., • 10+ years of progressive accounting experience, including 5+ years in a senior accounting or controller role with direct reports., • Strong background in construction industry accounting with exposure to multi-entity structures and project-based accounting., • Experience managing consolidated financial and intercompany transactions., • Proven expertise in GAAP compliance, WIP accounting, and treasury management., • Hands-on experience with ERP systems., • Deep understanding of construction job costing, revenue recognition, and project performance metrics., • Strong analytical, organizational, and problem-solving skills., • Excellent communication and interpersonal skills; able to work effectively with both finance and operations teams., • Strategic thinker with attention to detail and ability to manage multiple priorities., • Demonstrated leadership and team development capabilities.

Job Description Job Title: Accounts Receivable Analyst Department: Finance Reports to: Controller Worker category: Full-time Job Summary: We are seeking an experienced and proactive Accounts Receivable Analyst to oversee and improve our AR collections process across a dynamic client base of law firms and corporate legal departments. This individual will manage the full accounts receivable lifecycle—including invoicing, collections, and reconciliation—while building strong relationships with clients and internal stakeholders. The ideal candidate is analytical, solutions-oriented, and comfortable communicating directly with clients to resolve payment delays and disputes. Key Responsibilities: Client Invoicing & Payment Application • Prepare and send accurate client invoices and statements (paper and electronic) in a timely manner, • Set up new clients and maintain billing records in NetSuite, • Apply and post payments (check, ACH, EFT, credit card) in NetSuite, • Monitor aging reports and proactively follow up on outstanding balances, • Make direct collection calls and email follow-ups to reduce DSO and bad debt, • Resolve client disputes related to sales tax, invoice errors, and service documentation, • Escalate high-risk accounts to Sales or executive leadership with recommended actions, • Partner with Sales, Legal Operations, and Client Services teams to understand client nuances and invoicing requirements, • Track and report on COD job payments and other non-standard payment terms, • Prepare monthly AR and DSO reports with insights on trends, risks, and opportunities, • Support month-end close activities, general ledger reconciliations, and prepaid allocations, • Review American Express and Verisma postage accounts for reconciliation, • Review and process employee expense reports as needed Qualifications Skills and Competencies: • Confident and professional communicator, comfortable interacting with attorneys and law firm finance teams, • Results-driven and persistent in follow-up, with a focus on reducing aging receivables, • Ability to navigate complex client billing structures (split invoices, retainer balances, third-party billing), • Strong Excel skills, including pivot tables, v-lookups, and reconciliation techniques, • Detail-oriented with the ability to manage multiple priorities and deadlines Education and Experience: • Bachelor’s degree in Accounting, Finance, or Business required, • 3+ years of accounts receivable, collections, or client billing experience in a B2B services environment, • Experience with legal services, eDiscovery, or professional services clients preferred, • Experience with NetSuite or other ERP systems strongly preferred Work Environment and Physical Requirements: • This is a remote-eligible role with the expectation of core working hours aligned to Eastern Time, • There may be occasional requirements to work onsite at Avalon’s offices in Rochester, NY; Cleveland, OH; or New York City, depending on business needs., • Prolonged periods sitting at a desk and working on a computer, • Frequent communication via phone, email, and virtual meetings

Job Description Job Summary: The Senior Accountant is a key member of the accounting team that is responsible for typical month end close duties, reconciliations, and other analysis. This role is required to work in the Rochester office 5 days a week. Responsibilities: • Monthly preparation of journal entries, account analyses, and reconciliation of balance sheet accounts, • Responsible for the recording of lease reconciliations and journal entries in accordance with ASC 842, • Analyze contracts with customers and related accounting for revenue in accordance with ASC 606, • Daily reconciliation of cash ledgers for U.S. entity, • Perform certain intercompany accounting processes, • Participate as necessary in accounting integration of business acquisitions., • Coordinate with accounts payable and account management to resolve issues and develop solutions, • Assist with preparation of year-end audit work papers and responses to audit inquiries, • Assist with preparation of the year end financial statements and footnotes, • Assist in the implementation of internal controls and accounting processes and procedures, • Perform ad-hoc research and projects as needed Education: • A bachelor’s degree in accounting or Finance, • CPA in good standing preferred Experience and Training: • Minimum 2 years of relevant industry experience Experience and Training: • Experience with accounting for complex business entities especially a parent organization with multiple subsidiaries, • Background in accounting for a technology or software services organization, • Collaborative, innovative, flexible, and adept at building relationships across the organization, • Experience working with multiple projects and deliverables in a fast-paced, dynamic environment, • Self-starter and take full ownership of areas of responsibility, • Excellent presentation skills, including strong oral and writing capabilities, • Strong attention to detail and organized Technical Knowledge: • Strong Microsoft Office skills including Excel proficiency (H Lookups, VLookups, Pivot Tables, etc.), • General knowledge of GAAP reporting, • Experience with ERP systems (NetSuite) a plus Calero is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. The salary range for this role is $65,000-$90,000. It is important to Calero that potential candidates for this position understand that compensation depends on numerous factors including the geographic location where the role will be performed, skills required, experience, complexity, travel, and market rate. Calero aims to reward performance and attract top talent with competitive, fair pay and benefits. Please note that the top of the salary range represents exceptional, and/or senior-level positions, that meet all required qualifications. Actual offers take candidate’s knowledge, skills, abilities, and experience into account. Base Pay is just one component of the total compensation package for employees. Other rewards vary by position and location.

Job Description ABOUT US ShiftHop, LLC. is a technology services company for healthcare professionals and healthcare facilities. Our mission is to bring the PRN/gig-work to the healthcare field, allowing for decreased staffing shortages in the healthcare field. We empower healthcare professionals to become independent of their full-time job, by offering credentialing services and a clear path for becoming an independent contractor. With ShiftHop, healthcare professionals can find work 24/7, working whenever, wherever, and however often they’d like. ROLE AND RESPONSIBILITIES: We’re seeking a candidate to facilitate day-to-day operations, ensuring successful outcomes of several projects and initiatives by collaborating with our internal corporate team and our partner facilities. This is a remote position with a residency requirement of Rochester, New York. The ideal candidate can oversee multiple projects simultaneously, and is very flexible, while being a “hands-on” leader. This is a director level position which reports directly to the Chief Executive Officer. As a member of high-level leadership, you can expect to have 5-10 direct reports, who will eventually oversee a team of 50-75 in the Rochester, NY area. As the Director of Operations, you will: • Work to implement staff training and compliance procedures, as required by JCAHO for Staffing Agencies, • Implement scalable processes to support our inevitable growth, • Manage and communicate with healthcare facilities, offering complaint resolution and high-level contract approvals, • Facilitate internal leadership meetings, as well as external “pitch” conferences with potential partner healthcare facilities, • Oversee the financial team, ensuring prompt payments are received by partner facilities, and resolving any Accounts Payable complaints, • Assist in the hiring, training and oversight of Facility Success Managers and ShiftHopper Success Managers, further overseeing the onboarding, continued training and termination of these positions, • 5 years of leadership experience, preferably in a healthcare setting, • Advanced computer skills, including Microsoft Outlook, Excel, and ERP/CRM systems, • Bachelor’s degree or equivalent experience as listed above, plus HS Diploma, • Positive attitude seeking the common goal of providing a revolutionary service to reshape healthcare staffing, • Familiarity with nursing, post-acute and inpatient healthcare, • 100% employer paid medical, dental and vision (MVP Healthcare), • 100% employer paid life insurance, • 100% short and long-term disability, • 401k matching up to 10% annually, plus eligibility for immediate vesting, • Flexible schedule – work whenever able, so long as you meet the 40 hour/week minimum requirement, • Same day pay option 20ONGB3wIm

Job Description Elmira Stamping & Manufacturing-North is currently seeking a Laser Programmer to join our sheet metal manufacturing team. As a Laser Programmer, you will be responsible for creating precise CNC laser cutting programs using CAD/CAM software to optimize material usage and ensure efficient production. This role is critical to the accuracy, speed, and quality of our fabrication processes. About Us: Elmira Stamping & Manufacturing has specialized in medium- to high-volume contract metal stamping, progressive die stamping, and CNC machining since 1970. Elmira Stamping & Manufacturing specializes in both deep-draw and progressive die stamping. We are equipped with man servo, high-speed, mechanical, and hydraulic stamping presses ranging from 30 to 400 tons. Our machines are optimized for automation with in-die contact and non-contact sensors. We are also experts in secondary put-and-take operations for parts that cannot be completed in a progressive die. Additionally, we have multiple 5-axis Emmegi XT extrusion milling centers with a bed capacity of 30 feet, plus turrets, lasers, and more. The foundation for everything we do and make at Elmira Stamping is an unwavering commitment to quality and customer satisfaction! Position Overview • Develop and optimize CNC laser cutting programs using nesting software (e.g., SigmaNEST, Metalix, ProNest), • Interpret engineering drawings, blueprints, and specifications to create accurate cut paths, • Collaborate with production staff to ensure programs meet manufacturing requirements and timelines, • Maintain and update part libraries, tooling databases, and machine parameters, • Troubleshoot programming issues and revise code as needed to improve cut quality and efficiency, • Monitor material utilization and suggest improvements to reduce waste, • Support continuous improvement initiatives in programming and fabrication processes, • Associate degree or technical certification in manufacturing, engineering, or related field preferred, • 2+ years of experience in laser programming for sheet metal fabrication, • Proficiency in CAD software (e.g., AutoCAD, SolidWorks) and nesting/CAM software, • Strong understanding of sheet metal materials, thicknesses, and cutting characteristics, • Experience with multiple laser systems (e.g., Trumpf, Amada, Bystronic), • Familiarity with lean manufacturing and process optimization, • Knowledge of ERP systems and production scheduling, • Basic understanding of G-code and CNC machine operations, • Ability to read and interpret technical drawings and specifications, • Excellent problem-solving and analytical skills, • Strong attention to detail and organizational skills, • Effective communication and teamwork abilities Total Compensation Package: • Wage, • This role is based in the State of New York which requires the disclosure of salary ranges. The expected salary range for this position is $22.00 - $32.00 per hour. Elmira Stamping & Manufacturing provides salary ranges as a good faith estimate of what the company reasonably expects to pay for the position at the time of posting. Compensation offered to a selected candidate may vary based on factors such as (but not limited to) a candidate's job-related qualifications, skills, competencies, experience, and geographic location. The expected salary range for this position is subject to change and may be modified in the future., • Benefits - We recognize the value of a comprehensive benefits package and work vigorously to ensure our package meets the needs of our employees and their families. Eligible employees can elect and participate in variety of benefits including:, • Paid Holidays, • Paid Vacation / Sick Time, • 401 (k) Retirement Plan with Company Match, • Medical, Dental & Vision Insurance, • Employee Assistance Program (EAP), • Health Savings Account (HSA), • Company Paid Life Insurance, • Voluntary Insurance Benefits including Disability Insurance, Accident Insurance, Cancer Insurance, Critical Illness Insurance, Hospital Indemnity Insurance and Life Insurance Elmira Stamping & Manufacturing is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Summary: The Assistant Production Manager will manage the day to day operations of quality and production in collaboration with the Production Planning Coordinator. The Assistant Production Manager will implement a production schedule to meet all customer needs, supervise the Production Workers, and coordinate quality assurance activities. Essential Job Functions: • Coordinate job duties of production floor staff in preparation of product for warehouse storage and shipping, • Directly supervise Production Workers; responsible for all aspects of supervision, • Complete performance appraisals as scheduled, • Ensure that all production, quality, and staffing needs are met., • Coordinate all quality assurance activities for operations, per Safe Quality Foods program and requirements, • Verify all daily reports and metrics and submit the daily production documentation., • Meet all Unistel operations goals and objectives, • Follow up on customer service concerns as they arise, • Coordinate and approve time off requests for all assigned staff, • Responsible for hiring and coaching of production staff., • Provide relevant in-service training to assigned staff., • Ensure assigned staff is compliant with all required training., • Assist with cross coverage of other Unistel activities to maintain quality services., • Attend mandatory education and training sessions, as required., • Perform other duties as assigned by supervisor Knowledge, Skills, and Abilities: • Ability to work independently and in a team structure, • Ability to communicate effectively, both orally and written, • Knowledge and use of ERP systems for inventory monitoring and scheduling needs, • Ability to utilize Microsoft software, including Excel, Word, and Outlook Education and Experience: • Associates degree preferred., • Two years industrial experience in a supervisory capacity., • Forklift/Tow Motor experience/certification., • The ability to lift 50 pounds dead weight., • Must have a valid NYS Driver’s License. All experience and education requirements, except when required by federal, state, or local laws or requirements, may be waived at the discretion of management with the approval of the Chief Operating Officer, in collaboration with Human Resources. Physical Requirements/Working Conditions: • Sedentary working environment, • Ability to reach above shoulder level., • Ability to turn/twist upper body., • Able to use hand repetitive action for fine manipulating, keyboarding and typing. Corporate Qualifications/Expectations: • Adhere to all CDS Life Transitions, Inc. policies and procedures., • Adhere to the Agency Mission, Vision, Shared Values, and Customer Service Standards., • Attend mandatory education and training modules as scheduled; obtain and maintain all required certifications/training by State regulations and CDS policy, • Act as a professional representative of CDS Life Transitions, Inc. in regard to appearance, behavior, temperament, communication, language, and dress. The statements herein are intended to describe the general nature and level of work being performed but are not to be a complete list of responsibilities, duties, skills, required of personnel so classified. Also, they do not establish a contract for employment and are subject to change at the direction of the employer. CDS Life Transitions is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to gender, race, color, religion, national origin, ancestry, age, marital status, sexual orientation, pregnancy, disability, citizenship, military or veteran status, gender expression and/or identity, or any other status or characteristic protected by federal, state, or local law.

Job Description Insero Talent Solutions has partnered with a rapidly growing commercial, industrial, and civil construction and vegetation management Company based in Rochester to recruit a Purchasing Manager. Company Summary: Our client brings over 20 years of excellence with offices in Rochester, New York and Maine. The Company's focus was on Civil Construction and included services such culvert work, access roads, and in-ground construction projects. Over time, their service offerings expanded to include Vegetation Management specializing in land clearing, environmental matting, and utility line clearance. Position Summary: The Purchasing Manager is responsible for developing and implementing strategies for purchasing materials, equipment, and services for construction projects, ensuring they are delivered on time and within budget while meeting quality standards. Primary responsibilities include sourcing and negotiating with vendors, managing contracts and supplier relations, monitoring market trends, inventory levels, collaborating with project teams, and ensuring compliance with company policies and regulations. Key Responsibilities: Qualifications and Requirements: • Bachelor's degree in Construction, Business Administration, Supply Chain Management, or a related field., • 5+ years of relevant construction procurement experience, commercial and industrial experience is required and vegetation management and site access equipment experience highly preferred., • Strong negotiation and contract management skills., • Knowledge of market trends, pricing, and supply chain logistics., • Proficiency with procurement software and ERP systems., • Excellent communication, collaboration, and leadership skills.

Job Description Insero Talent Solutions is recruiting an ERP Specialist for a growing manufacturing company in Rochester, NY. Job Summary: The ERP Specialist will manage all aspects of the SAGE X3 system as well as be part of the deployment and implementation team. This role requires a strong knowledge of the various business needs in a manufacturing environment including Sales, Scheduling, Engineering, Manufacturing, Quality and Finance. The position reports directly to the IT Manager locally, as well as the IT Manager internationally and interacts with all levels of the organization. Implementation Responsibilities: · Understand site business requirements · Work with the SAGE Central Team in the implementation of SAGE X3, propose the evolution of the Core Model and work with the team to analyze change requests · Support data preparation and migration · Follow-up on specific developments when needed · Animate workshops for acceptance tests · Conduct on-site training for end users and create training materials for specific user interfaces General Responsibilities: · Create, maintain and develop dashboards, forms, SSRS reports, BAQs, and other customizations to maximize utilization and productivity of the ERP system to meet the needs of the organization. · Test and implement new SAGE modules at other sites · Provide daily ERP support for system users in Honeoye Falls and Longwood. · Participate in ad-hoc or special projects. · Provide system training as needed to support a high level of competency across the organization. · Assist with developing and managing data exchanges with ERP system and other software systems. Required Skills and Experience: · At least three years experience and expertise with an ERP system. · BS in Computer Science or related IT field. · Experience in implementation and project management of systems in a manufacturing environment. · Understanding of common manufacturing processes and workflows. · Strong knowledge of SQL and SSRS and/or Crystal reporting tools. · Ability to understand the needs of various users in different departments, including Manufacturing, Sales, Engineering, Quality, Finance and Management. · Ability to interact professionally and effectively with all levels of the organization. · Excellent written and verbal communication skills. · Experience in multi-site ERP management Preferred Skills and Experience: · Experience with Visual Basic. · General IT support experience. · Experience in training and developing training materials · Ability to work solo and as part of a team

Job Description Insero Talent Solutions is recruiting an Associate Supply Chain Analyst for a manufacturing company in Rochester, NY. Coordinates activities involved with procuring goods and services such as raw materials, equipment, tools, parts, and supplies required to meet production and project schedules Assist with order entry and communicate with customers on order status. Essential Duties and Responsibilities: • Review customer requests for parts and services and provide quotations., • Interact with internal engineering and service teams to answer customer inquiries, • Reviews and processes approved purchase requisitions., • Confers with vendors to obtain product or service information such as price, availability, and delivery schedule., • Selects products for purchase based on engineering specifications or other information provided by the person making the requisition., • Prepares purchase orders and/or quote requests., • Maintains procurement records such as items or services purchased, costs, delivery, product quality or performance, inventories and supplier information., • Discusses defective or unacceptable goods or services with quality control personnel, users, vendors, and others to determine source of trouble and take corrective action., • Works with Finance to correct invoice discrepancies due to quantity and/or cost., • Expedites delivery of goods to users, as needed., • Works with Quality team to monitor, track and communicate supplier performance., • Partners with Manufacturing Engineering to meet company goals for cost reduction, outsourcing, and new product launches., • Optimizes use of ERP system to maximize efficiency of Manufacturing and Business processes., • Maintains inventory control and verifies inventory accuracy by periodic cycle counts, • Builds and maintains strong supplier relationships., • Bachelor’s degree required. The following certifications are applicable to this position: • APICS: CIRM, CPIM, • Thorough understanding of ERP/MRP software systems, logistics, inventory control, BOM structure, and supply chain management required.

Job Description Job Title: Location: Job Type: **Salary:About the Role leading precision manufactureraerospace, medical, and high-tech industriesProcess Engineerstate-of-the-art, climate-controlled facility** What You’ll Do- Receive orders and set up routings/work orders in the ERP system (E2, transitioning to Epicor) * Identify required machines and estimate run times * Coordinate with quality and production for job order release * Support process improvement and lean manufacturing initiatives * Conduct root cause analysis and implement corrective actions * Ensure compliance with safety and quality standards What We’re Looking For- Bachelor’s degree in Engineering (or equivalent experience) preferred * Background in manufacturing process development or process engineering * Strong GD&T knowledge and Lean Manufacturing experience * Excellent problem-solving and communication skills What’s Offered:- $80k–$90k salary, based on experience * 401(k) with match, health/dental/vision, PTO, life insurance * Career growth in a modern, high-tech environment You should be proficient in: • GD&T, • Process Engineering

Job DescriptionSalary: $48K -$63K About Brothers International Food Holdings, LLC: At Brothers International, we are passionate about creating high-quality food products that enrich lives and bring people together. Our Ingredients division supplies top-quality fruit and fruit juice concentrates to a number of Fortune 100 food companies. Our Consumer-Packaged Goods (CPG) division includes Brothers-All-Natural, the #1 Freeze-Dried Snack Brand, and also produces private label freeze-dried fruit snacks for some of the leading retailers in the US. Headquartered in Rochester, NY, with offices in Florida and China, we are an innovative global leader in the food industry. We take pride in our commitment to excellence, sustainability, and the well-being of our communities. If you are interested in becoming part of a fast-growing, dynamic team environment, read on! Why Brothers International? • Innovation:Be part of a company that values creativity and encourages innovation in the ever-evolving food industry., • Team Collaboration:Join a collaborative work environment where your ideas and contributions are recognized and celebrated., • Global Impact:Contribute to a company with a global presence, making a difference in the lives of people worldwide through our diverse range of food products. Position Summary: Join our dynamic team and be a part of a company dedicated to making a positive impact through delicious and nutritious food offerings. As an Operations Coordinator, you will provide supply chain and logistics support for our products, manage inbound and outbound transportation for domestic and international customers/suppliers, execute production planning, and coordinate activities with contract manufacturers and co-packers. We are seeking individuals who are passionate, driven, and ready to contribute to our collaborative team environment. Essential Functions: The essential functions include, but are not limited to the following: • Prepare and monitor contracts in conjunction with the sales team; Coordinate the development and implementation of contract administration plans and provide on-going oversight of contract performance and issue corrective actions when needed., • Facilitate timely and accurate account /orders management for various customers, via direct communication with the customers, vendors, and sales team., • Build strong customer relationships while supporting sales personnel in identifying customer practices and needs to resolve issues and identify process improvements. Proactively seek to understand the needs of the customers and provide the highest standards of service., • Monitor and track all pending orders, including entering, troubleshooting, and communicating information about scheduling, cancellations, and inactive orders., • Mitigate customer complaints, provide appropriate solutions and alternatives within time limits; provide follow up to ensure optimal resolution., • Review contracts and orders for completeness and accuracy. Acquire needed information and/or approvals prior to releasing order for shipment (i.e.: pricing discrepancies, sample and quality requirements, approval to ship close-dated cases, etc.)., • Collaborate with Sales on contract releases and generate shipment releases & labeling, send to the supplier, • Communicate with overseas suppliers and Shared Services Team, • Review and approve sailing schedule, draft labels, draft commercial invoices, draft B/L, and coordinate bookings, • File set-up and maintaining of related files and update shipment release and backlog in ERP, • Gather IFS data to submit to Shared Services, • Determine whether substitutions / date changes are required for order fulfillment based upon projected shortages as compared to planned production / scheduled transfers/aging inventory., • Manage and organize documentation requirements and compliance mandates per customer and government regulations, including IFS data., • Responsible for meticulous and detailed record keeping for auditing and reporting purposes., • Perform daily activities of the invoicing and billing functions. Assists in the tracking and necessary follow-up action for life of invoice., • Provide A/R with invoice management assistance to resolve short/over payments and claims; communicate issue, root cause and resolution to internal and external customers in a timely manner., • Manage returns, damage claims and complaints; communicate cause and resolution to affected/responsible business partners, assign action items to appropriate personnel and ensure approval is obtained., • Participate in team initiatives to further continuous improvement., • Occasional special projects as requested / Other duties as assigned by management. Minimum Qualifications (Knowledge, Skills and Abilities): • Provide quality service to BIFC internal and external customers in all assigned tasks, while always upholding BIFC Values., • Good oral and written communication with strong emphasis on follow-up and organizational capability., • Experience with Microsoft Office and Outlook., • Familiarity with ERP systems preferred., • Experience with domestic transportation terms and procedures, including freight terms, documentation, claims filing, load planning and shipment tender., • Experience with international terms and procedures, including INCOTERMS, ISF filing, Commercial Invoices, customs clearance, and Harmonized Tariff classification., • Experience in Production planning/execution, including Bills of Material, scheduling, and assignment of materials. Note: Brothers International is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description Join a High-Mix, High-Precision Team TekPro is partnering with a premier contract machining company in the Rochester, NY area to hire a Manufacturing Engineer focused on Mastercam programming, tooling/fixture design, and process engineering for complex aerospace, defense, and medical components. Compensation flexibility: This role typically offers high hourly pay with substantial overtime earning potential and can also be structured as a salaried position. A day in the life You start the morning in a climate-controlled facility reviewing a complex aerospace drawing. Solid model in hand, you open Mastercam to program a 5-axis VMC toolpath, design a modular fixture in SolidWorks, and draft clear work instructions so production can hit first-article quality on the first run. By mid-day you’re collaborating with operations and quality to troubleshoot a bottleneck on a 2–4 axis lathe, then closing the loop with an ERP update. You finish by refining a quoting package to meet a customer deadline and identifying a new technology upgrade to cut cycle time and cost. What you’ll do • Engineer robust, repeatable CNC processes; establish shop standards; and drive continuous improvement to stabilize production., • Optimize manufacturing methods, machine operations, and throughput to reduce cycle time, improve quality, and deliver cost savings., • Collaborate across management, manufacturing, and other departments to troubleshoot production needs and resolve issues quickly., • Evaluate and implement new technologies to upgrade systems, tooling, and workflows., • Meet customer deadlines on quotes with accurate methods and timing., • Design and develop tooling/fixturing, work instructions, and CNC programs (Mastercam) for complex parts. Qualifications, • BS in Engineering or equivalent hands-on experience., • Experience as a manufacturing engineer or similar role in CNC environments., • CAD/CAM proficiency: SolidWorks, Mastercam, and Part Maker., • Knowledge of CNC equipment and quality assurance practices., • Proficient with Microsoft Office and ERP systems., • Strong project management, problem-solving, and multitasking skills., • Committed to health and safety standards; able to contribute in teams and work independently. Technical strengths we value, • GD&T interpretation and application, • CNC tooling selection and optimization, • Advanced CNC programming (Mastercam), • Design for Manufacturability (DFM), • Efficient machine setups for production runs, • CAD/CAM workflows and data management Machines and software you’ll work with, • CNC Mill (3–4 axis VMC), • CNC Lathe (2–4 axis), • CAM Software (Mastercam), • CNC Mill (5+ axis VMC) Benefits, • Paid holidays and PTO, • Multiple healthcare plan options, • Dental and vision coverage, • Health Savings Account, • 401(k) with company match, • Life insurance, • Climate-controlled facility

Job Description Job Summary: The Purchasing & Vendor Relations Specialist will oversee vendor management, purchasing operations, and supply chain support. This role combines strategic procurement with hands-on engagement on the manufacturing floor, ensuring the timely availability of high-quality raw materials while building strong supplier partnerships. The role will balance cost optimization with quality, reliability, and efficiency Essential Duties and Responsibilities: Purchasing & Procurement • Source, evaluate, and purchase raw materials, components, and supplies needed for production., • Manage purchase orders, monitor deliveries, and ensure on-time availability of goods., • Negotiate terms, pricing, and contracts to achieve cost savings and favorable supplier agreements., • Maintain accurate records of purchases, pricing, and inventory levels. Vendor Relations & Quality • Develop and maintain strong relationships with key vendors and suppliers., • Conduct vendor assessments and site visits to ensure quality standards and compliance., • Collaborate with vendors to improve lead times, pricing structures, and supply chain efficiency., • Monitor and resolve supplier performance issues, including quality and delivery concerns. Manufacturing Floor Engagement • Work closely with production teams to understand raw material requirements., • Provide hands-on support on the manufacturing floor to align procurement with operational needs., • Monitor inventory usage and communicate supply requirements in real time., • Assist in implementing best practices for material flow and usage efficiency. Supply Chain & Continuous Improvement • Manage raw material and supply inventories, ensuring availability without overstocking., • Identify opportunities to reduce costs and improve procurement processes., • Support supplier audits, quality improvement initiatives, and corrective action plans., • Collaborate cross-functionally to improve procurement systems and vendor partnerships. Additional Responsibilities: • May cover for other personnel., • When requested, may work on special projects and various related assignments., • Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Must have the ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from low, moderate to loud. Education, Skills and Experience: • Bachelor’s degree in Supply Chain Management, Business, Engineering, or related field (preferred)., • 3–5 years of experience in purchasing, procurement, or supply chain (manufacturing experience preferred)., • Certification in procurement/supply chain preferred., • Strong negotiation, analytical, and problem-solving skills., • Excellent communication and interpersonal skills to build lasting vendor relationships., • Ability to work independently on vendor visits and collaboratively on the production floor., • Proficiency in ERP/MRP systems and Microsoft Office Suite., • Good oral and written communication skills., • Strong organization skills., • Must be familiar with computers and computer software., • Work independently with minimal supervision

Job Description Founded in 1994 and celebrating 30 years in business, Mindex is a software development company with a rich history of demonstrated software and product development success. We specialize in agile software development, cloud professional services, and creating our own innovative products. We are proud to be recognized as the #1 Software Developer in the 2023 RBJ's Book of Lists and ranked 27th in Rochester Chamber’s Top 100 Companies. Additionally, we have maintained our certification as a Great Place to Work for consecutive years in a row. Our list of satisfied clients and #ROCstar employees are both rapidly growing— Are you next to join our team? Under the direction of the Vice President of Finance and Administration, the Accountant is responsible for the day-to-day functionality of financial operations, ensuring effective and efficient accounting practices, policies, and transactions, while upholding the organization’s mission and values. Provide excellent and consistent customer service when managing all financial interactions. Maintain a positive working relationship within the team and with external stakeholders. Essential Functions • Create invoices according to company practices; submit invoices to customers., • Prepares, posts, verifies, and records customer payments and transactions related to accounts receivable., • Maintains and updates customer and vendor files, including name or address changes, mergers, or mailing attentions., • Drafts correspondence for standard past-due accounts and collections, identifies delinquent accounts by reviewing files, and contacts delinquent accountholders to request payment., • Posts journal entries into the company’s accounting software, including but not limited to bi-weekly payroll, expense review, depreciation, accruals, prepaids., • Supporting month-end close, including financial statement and account reconciliation preparation, to ensure timely reporting within 5 business days., • Assists performing variance analysis to compare actual results against budgets, forecasts, or prior periods, and provide explanations for discrepancies., • Assist with year-end external audit and quarterly reviews. Requirements • Bachelor’s degree in accounting, finance, or related field., • At least three years’ experience in a public accounting, public company or private company accounting/finance department., • Intermediate knowledge of GAAP (Generally Accepted Accounting Principles) and regulations, • Exposure to data analysis, risk management, and forecasting methods., • Proficient in Microsoft Office Suite, particularly Excel., • Knowledge of ERP software., • Excellent attention to detail and organizational skills., • Strong communication and interpersonal skills. Physical Conditions/Requirements: • Prolonged periods sitting at a desk and working on a computer, • No heavy lifting is expected. Exertion of up to 10 lbs. Benefits • Health insurance, • Paid holidays, • Flexible time off, • 401k retirement savings plan and company match with pre-tax and ROTH options, • Dental insurance, • Vision insurance, • Employer paid disability insurance, • Life insurance and AD&D insurance, • Employee assistance program, • Flexible spending accounts, • Health savings account with employer contributions, • Accident, critical illness, hospital indemnity, and legal assistance, • Adoption assistance, • Domestic partner coverage Mindex Perks • Tickets to local sporting events, • Teambuilding events, • Holiday and celebration parties Professional Development • Leadership training, • License to Udemy online training courses, • Growth opportunities The band range for this role takes into account the wide range of factors that are considered in making compensation decisions including, but not limited to, skill sets, education, experience, training, certifications, internal equity, and other business and organizational needs. It is not typical for an individual to be hired at, or near, the top of the range for their role; and compensation decisions are dependent on the facts and circumstances of each case. The range for this role is $70,000 - $120,000. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor, or take over sponsorship of an employment Visa at this time.

Job Description Seal & Design, Inc. is a family owned company founded and located in Clarence, NY with three divisions located across the U.S. and Canada. Our product line includes gaskets, o-rings, seals, molded rubber and plastics, die-cut foams, and many other products for a wide array of sealing applications. We provide superior products to our customers across many industries, including: Automotive, Medical, Military & Defense, Aerospace, Electronics, Power Generation, Hydraulics, and HVAC. • Order entry, • Customer support, • Quoting and part set-up, • Provide order status; expedite as necessary, • Source raw material and products, • Review forecasts and maintain ERP system, • Support account managers and outside sales as needed Salary: $55,000 - $68,000/year Requirements Willingness to grow professionally, with desire to move quickly from customer service/inside sales into full account management. Ambitious and self-starting Detail oriented Excellent communication skills Strong mathematical and problem-solving skills Technical aptitude with strong analytical skills Ability to organize and manage multiple priorities Qualifications · Bachelor's degree and/or two years experience · Experience in manufacturing or supply chain are a plus Benefits LATER • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance

Job Description PRODUCTION CONTROL COORDINATOR Advantech Industries, Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility. We are currently seeking an individual to collaborate with us as a Production Control Coordinator. The Production Control Coordinator will develop and implement project scheduling and strategy throughout the manufacturing process to successfully maintain production flow in support of our customers’ deadline. In addition, the coordinator communicates and coordinates with all departments to ensure a successful outcome for all projects Successful candidates will possess: • A HS Diploma or GED with equivalent work history;, • 5 years of production control experience;, • Previous experience with ERP Systems;, • Thorough operational knowledge of plant operations, while working under pressure and adhering to deadlines;, • Capacity to be diplomatic and possess good human interaction skills;, • Alignment with the requirements and principles of the Advantech Quality Management System and ISO 9001:2015;, • Skills to operate assigned equipment safely and efficiently;, • Capacity to handle changes in business operations and adjust to new situations;, • Preparedness to walk for extended periods on the manufacturing floor;, • Ability to work with limited supervision. What we offer: • Monday through Friday 7:30 am to 4:00 pm;, • Full time employment (39.75 hours per week);, • Medical (3 HDHP offered), Dental and Vision Plans;, • Vacation, Paid Sick Leave and Company Paid Holidays;, • Company Paid Life Insurance;, • Optional Short-Term and Long-Term Disability Available;, • 401k with Company Match. According to the New York Pay Transparency law, pay range for this job is $28.00 - $35.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Advantech Industries Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Advantech Industries Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources.

Job Description FLOWER CITY GROUP is hiring a QUALITY ASSURANCE INSPECTOR! This is a perfect opportunity for anyone who is looking to be part of a fun, successful, and growing company within the printing and packaging industry! We Hustle, We Own, We Learn, We Invent, and We Believe! Do you? If so, apply today! Position Title: Quality Assurance Inspector Pay Type: Hourly FLSA Designation: Non-Exempt Reports to: Quality Assurance Supervisor Location: Rochester, NY Salary Range: $18-22/hour Summary/Objective: The purpose of this position is to ensure printed and kit-packed material comply with production and quality requirements set by our customers. The Quality Assurance Inspector evaluates materials and products to determine if there are any deviations or defects. They work to ensure the requirements and specifications are met and that the assembly or production lines comply with customer requirements. Essential Functions: • Inspection of product parts (kits) from all production lines, • Perform inspection of kit parts individually. Compare parts to the Kit sheet to ensure the correct parts are being utilized, and all parts are accounted for., • Measurement of part dimensions and examine for functionality when necessary., • Communicate results of inspections. Make corrections and adjustments to ensure operations reflect the Kit Sheet., • Perform thorough documentation of deficiencies and errors on the Kit sheet., • Continuous monitoring of production line operations to ensure compliance and conformance., • File and maintain sample kits for future reference. Competencies: • Knowledge of the Print and Packaging Industries, • Proficient in all Microsoft Office Tools, • Proficient in ERP system, once trained., • Able to analyze and interpret information and data., • Proficiency in basic math with ability to read a ruler., • Excellent written and verbal communication (Bi-lingual English/Spanish a plus), • Excellent organizational skills, • Able to work independently and as a member of a team. Physical Demands: • Regularly required to utilize ability to visually inspect, including close range, distance, differentiation of color, peripheral vision, depth perception and the ability to adjust focus., • Regularly required to talk or hear., • Routine use of standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines., • Position requires standing for long periods of time., • Ability to work under pressure with ever changing deadlines and priorities., • Ability to lift and/or move 50 lbs. occasionally. Requirements/Qualifications: • 1+ years of inspection and or production experience Preferred Education and Experience: • High School diploma or equivalent AAP/EEO Statement Flower City Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), gender, national origin, ancestry, age, physical or mental disability, military status, status as a veteran or disabled veteran, sexual orientation, gender identity or expression, marital or family status, genetic information, medical condition, or any other basis protected by applicable federal, state, or local law, ordinance, or regulation.

Job Description Century Mold has a significant North American footprint and currently has six manufacturing facilities, two sales and engineering offices and a Tool Shop, supporting sales of $220 million plus. At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: The Procurement Manager supports Century Mold’s enterprise-wide purchasing strategy, ensuring effective execution of category management initiatives, supplier performance, and cost optimization across all purchased goods and services. This role manages sourcing and negotiation activities, leads supplier relationship management, and coordinates procurement processes across Century Mold’s U.S. and Mexico operations. The Procurement Manager plays a key role in driving cost savings, supplier quality, and operational consistency through disciplined procurement execution and collaboration with cross-functional teams. What You’ll Be Doing: • Execute Century Mold’s category-based procurement strategies to achieve cost, quality, and delivery targets., • Implement and maintain standardized purchasing processes, procedures, and systems across plants., • Manage sourcing events, supplier negotiations, and contract implementation for key materials and services., • Track and report procurement KPIs and metrics; identify and act on opportunities for improvement., • Support supplier selection, qualification, and performance management, ensuring risk mitigation and supply continuity., • Monitor market and commodity trends and share insights with internal stakeholders., • Collaborate with plant-level purchasing teams to ensure alignment with corporate strategy and compliance with standards., • Lead and develop procurement professionals, fostering capability in strategic sourcing and negotiation., • Partner with Engineering, Materials, and Operations teams to support new program launches, cost-reduction initiatives, and supplier transitions., • Support corporate governance processes, audits, and supplier performance reviews. We would love to hear from you if: • Bachelor’s degree in Supply Chain, Business, Engineering, or related field., • 7+ years of procurement and sourcing experience in manufacturing; multi-site experience preferred., • Strong negotiation and supplier management skills with experience achieving measurable cost savings., • Proficiency in cost modeling, total cost of ownership, and procurement analytics., • Experience with ERP/MRP systems and procurement tools., • Excellent communication and cross-functional collaboration skills., • Demonstrated ability to manage multiple projects and priorities in a fast-paced environment. Preferred Attributes • CPSM, CSCP, or similar certification., • Automotive or injection molding industry experience., • Bilingual (English/Spanish) a plus., • Experience coaching or mentoring procurement team members. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description Our client, a leading manufacturer of aero engines and industrial gas turbine components, is a globally recognized public company with a remarkable 75-year history of growth and innovation. Renowned in the aerospace industry, it offers an exceptional company culture that fosters development and provides diverse opportunities. Forbes has honored it as one of the World's Best Employers, highlighting its commitment to excellence and inclusivity. Why consider joining our client? • Publicly traded company on a path of continuous growth and recognized by Forbes as a top global employer, • Exceptional insurance coverage and 401 (k) matching program, effective upon hire., • Employer contribution to your Retirement Savings Plan account each pay period, • Vibrant company culture and collaborative team environment, • Access to excellent training programs for professional development, • Free fitness center membership, • Global leadership role driving procurement strategy across 8 sites in 3 countries with direct impact on cost savings, supply chain performance, and long-term growth The Financial Analyst supports the day-to-day general accounting functions and coordination month end closing process, and daily/weekly monthly financial reporting, in addition to providing back-up to the Sr Financial Analyst position as it relates to inventories, standard cost revisions, and forecasting. Specific Responsibilities Include: • Perform the monthly close process., • Complete financial and non-financial data requests of the controller., • Ensure the proper functioning of internal controls and compliance with U.S. SOX 404 legislation (Sarbanes-Oxley)., • Analyze balance sheet items in collaboration with Shared Services and the business unit in the United States., • Schedule and track scrap pickups and invoicing of scrap bill of ladings, • Assist with Credit Memo Posting and Re-Aging of Accounts Receivable Items under the direction of the Plant Controller Basic Qualifications: • BA or BS in Business Administration major emphasis in Accounting or Finance., • 1-3 years of related experience in a manufacturing environment as an Analyst or Cost Accountant., • Knowledge of US GAAP. Preferred Qualifications: • 2-3 years of directly related work experience - standard cost system, manufacturing, aerospace. QAD and Oracle ERP system experience is highly desirable., • Visual Software Experience, • Oracle/Hyperion experience, • Advanced knowledge of Microsoft Office suites Skills: • Experienced in a Manufacturing environment, • Strong knowledge and understanding of GAAP, with solid analytical and strategic planning skills., • Excellent interpersonal communication skills, self-motivated, and team-oriented., • Must be proficient with computer systems and programs (MS-Word, MS-Excel, and MS-PowerPoint, etc.) good spreadsheet skills., • Flexible and someone with a strong desire to learn., • Ability to be a sole contributor, in addition to working in a team environment., • Ownership Culture Attitude Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

Job DescriptionSalary: $20 - $24/Hour Were looking for a temporary (through end of year) Manufacturing Technician (Assembler) to join our growing team in West Henrietta, NY! Who we are: Safran Electronics & Defense is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. The Position: As a Production Operator, you will be responsible for the assembly of small or medium sized parts, fitting and/or adjustment of interrelated parts, repair of sub-assemblies and major assemblies. The Day to Day: • A Production Operator uses a wide range of hand and power tools, electrical or mechanical fixtures and gauges, standard measuring devices such as dial indicators, micrometers or voltmeters, drills, jigs, fixtures and light materials., • You will be responsible for inspection and testing of your own work and work of others., • May involve mechanical, optical and electrical/electronic operations. What you Bring to Safran: • High School Diploma or GED equivalent, • Minimum 5 years electronics assembly experience or equivalent with soldering experience on printed circuit boards, • Ability to solder/de-solder/rework assemblies/SMT experience, • IPC-610 & JStandard 001, • Ability to read and follow directions with heavy attention to detail, • Able to use ERP system to complete tasks as required, • Able to read color coded Process Details At Safran Electronics & Defense, youll combine passion for your job with a quality work environment adapted to a good life balance. Benefit from a variety of opportunities to shape the career path that suits you: our leaders and technical experts are there to support you from your integration and career development, in France and abroad. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description Responsible for overseeing the daily operations of a customer service department, leading a team of representatives to ensure high-quality customer interactions, resolve complaints, and implement strategies to maintain customer satisfaction and loyalty by setting policies, training staff, and monitoring performance metrics to achieve company objectives. To keep the customer service department running in an efficient and profitable manner, ensure high customer satisfaction and loyalty, and develop strategies to improve the customer experience, while also collaborating with other departments to achieve organizational goals. Duties and responsibilities Team Leadership and Management: • Lead, motivate, and mentor a team of customer service representatives., • Set team goals, monitor performance, and provide regular feedback., • Recruit, hire, and train customer service staff., • Address and resolve team conflicts. Customer Service Operations: • Oversee the daily operations of the customer service department., • Develop and implement customer service policies, procedures, and training programs., • Ensure efficient and effective handling of customer inquiries, complaints, and issues., • Manage customer service tools and CRM software. Customer Relationship Management: • Build and maintain strong relationships with customers., • Understand customer needs and expectations., • Proactively identify and address potential customer issues., • Implement customer retention strategies. Performance Management and Improvement: • Collect and analyze customer service data to identify areas for improvement., • Develop and implement strategies to enhance customer satisfaction and loyalty., • Monitor and evaluate customer service performance against established metrics., • Stay updated on customer service trends and technologies. Collaboration and Communication: • Collaborate with other departments (e.g., sales, marketing, production) to ensure a positive customer experience., • Communicate customer feedback and issues to relevant stakeholders., • Represent the customer service department in meetings and cross-functional projects. Manufacturing-Specific Responsibilities: • Understand the manufacturing processes and products., • Address issues related to product quality, delivery, and order processing., • Work with plant and production managers to resolve job issues., • Support Lean Manufacturing Initiatives. Other duties as assigned Qualifications Education • Five years of experience in an inside sales/customer service role for a manufacturing company is REQUIRED, • Two years of experience processing orders in a custom/ made to order/ manufacturing environment is REQUIRED, • Must have experience working in an ERP and CRM database in the last five years of employment, • Proficient with Microsoft Office Suite, web browsers (including web-based application), and ERP systems (Syteline preferred)., • Magnetic and/or metal manufacturing industry experience is a plus, • Organized and detail oriented, capable of multi-tasking., • Communication: All contacts require tact, efficiency, and the ability to positively and patiently communicate, as well as excellent written and verbal communication skills., • Commercially Astute: Ability to communicate with clear and positive representations of the company and using good judgment on what to say, when to say, and how to say it., • Entrepreneurial: Helping to identify solutions to any challenges and improve efficiency in managing customers., • Technical: Technical competence to understand the products we sell and the methods used in their manufacture. Working conditions • Standard work week is Monday through Friday, hours to be consistent with business unit; some off hours work expected., • Generally working in Office with some activities in production environment., • Some day or overnight travel domestically could be required. Physical requirements • Could require intermittent and long periods of sitting and/or standing., • Required to do repetitive work, with fingers and hands, • Periodic lifting of materials not to exceed 25 pounds. Direct reports • Yes Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran #ROC

Job Description Upstate Roofing & Painting is seeking a skilled and dynamic Accounting Specialist to play a crucial role in managing day-to-day accounting functions, ensuring accuracy in accounting records, and supporting the business with timely administrative functions. Responsibilities: • Accounts Payable & Receivable:, • Process vendor invoices and payments, • Reconcile vendor statements, • Generate and send customer invoices, • Monitor aging reports and follow up on outstanding receivables, • Enter purchase orders and inventory transactions, • Banking & Reconciliation:, • Reconcile credit card statements monthly, • Enter credit card transactions and report discrepancies, • Job Costing & Project Accounting:, • Track expenses and revenue by job/project, • Support project management teams with administrative tasks, • Ensure compliance with local, state, and federal tax regulations, • Maintain organized records for audits and inspections, • Administrative Support:, • Serve as a backup for other accounting functions, • Assist with general office tasks and vendor communications, • Ensure timely and professional handling of incoming calls to support efficient communication and customer service., • Other duties as assigned Requirements: Required: • Associate’s or Bachelor’s degree in Accounting, Finance, or related field, • 2+ years of accounting experience, preferably in construction or contracting, • Strong Excel and data entry skills, • Experience with ERP systems and financial reporting tools, • Knowledge of job costing and construction billing practices, • Experience with Acumatica Upstate Roofing & Painting is committed to providing equal employment opportunity to all applicants and Team Members regardless of their race, color, religion, age, sex, national origin, disability, military service, protected veteran status, genetic information, sexual orientation, gender identity, or any other characteristic protected by federal, state or local law.

Job Description We are seeking experienced Visual Inspectors to perform 100% visual inspection under a microscope on small, precision-machined metal components used in aerospace and defense applications. This is a focused, detail-oriented role—your primary responsibility is to identify cosmetic and surface defects and accurately document pass/fail results. What You’ll Do: • Perform microscope inspection of CNC-machined Aerospace parts per work instructions, samples, and acceptance criteria., • Identify and segregate nonconforming product (e.g., nicks, burrs, scratches, dents, tool marks, FOD, coating/plating blemishes)., • Record and document inspection results (pass/fail, defect codes/notes) in excel logs and ERP system., • Tag and escalate defects to the Quality Lead/Inspector for disposition., • Maintain a clean, organized, FOD-controlled workstation; handle delicate parts safely., • Meet daily throughput and accuracy targets while following AS9100/ISO 9001 procedures and EHS guidelines. What You’ll Bring: • 3+ years of prior experience with Microscopes, for visual inspections in precision manufacturing environments (aerospace/defense, medical device, optics, or similar), required., • Exceptional attention to detail, steady hands, and comfort with repetitive, precision work., • Ability to read and follow written work instructions with GD&T and basic drawings/visual standards., • Basic computer skills for entering inspection results., • Physical ability to sit/stand for extended periods, use hands to handle small parts, and maintain visual focus under magnification., • Must know how to use inspection and metrology equipment & tools; microscopes, calipers, micrometers, gage blocks, stage micrometers, optical comparators, height gages, Radius gages, chamfer/countersink gage, bore gage, thread pitch gage (for simple confirmation checks) to conduct visual inspections., • High school diploma/GED required., • Prior experience with MS Office Suite Software, excel, and ERP systems, preferably Epicor., • Willingness to work assigned shift and overtime as needed.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Job Description The Deburring Technician ensures every part leaving the machine meets strict edge-finish, surface, and cleanliness requirements. You’ll remove burrs, break edges, and blend surfaces on tight-tolerance components, collaborating closely with Machining and Quality to hit schedule and first-pass yield targets. This person will be responsible for the final finishing stage of CNC-machined aerospace and defense components. Job Responsibilities * Remove burrs, sharp edges, and excess material from CNC-machined parts using hand tools, air tools, grinders, files, and polishing equipment. * Perform fine deburr under a microscope on small features, cross-holes, slots, and EDM details. * Inspect machined components for defects, surface irregularities, or sharp edges that don’t meet aerospace quality standards. * Read and interpret blueprints and work instructions to ensure parts are finished according to engineering requirements. * Interpret blueprints and GD confirm edge conditions (e.g., chamfers/radii as specified) and critical features prior to QA. * Work with precision measurement tools (calipers, micrometers, depth/pin gauges and optical comparator) to confirm dimensional accuracy after deburring. * Complete traveler/ERP signoffs and lot traceability. * Perform surface finishing processes such as polishing, edge-breaking, chamfering, and smoothing to meet aerospace surface-finish specifications. * Operate/maintain vibratory/tumble deburr equipment, bead/air blast, part cleaning/ultrasonic, and safe packaging practices. * Quality & Collaboration: Partner with Machining/Quality to resolve edge-condition issues, suggest process improvements, and prevent rework. * Works closely with CNC machinists, quality inspectors, and engineers to ensure finished parts are compliant and ready for customer shipment. * Maintain quality and consistency by following AS9100/ISO aerospace quality standards and internal inspection processes. * Maintain organized benches, manage media/tooling, follow PPE and FOD-prevention practices. Requirements * 1+ year of experience in CNC Operation, Finishing, or Deburring, with a good understanding of the precision machining processes, tolerances, finishing/deburring, and quality processes, required. * GD&T literacy with solid measurement skills, required. * Able to read and interpret engineering and customer specs, required. * Comfortable with using precision measurement tools (micrometers, calipers, gauges), microscopes, and small parts, to confirm dimensional accuracy after deburring. * Prior experience with ERP systems, and MS Office (word/excel), required. * High School Diploma, or GED, required and basic math skills, required. * Must be comfortable with hand tools; air tools, grinders, polishing equipment, files, stones, scrapers, X-Acto/razor tools, deburr blades, abrasive pads/rolls, rotary & pneumatic grinders (e.g., Dremel), micro-abrasive tools, bead/air blast, vibratory/tumble bowls, microscope, ultrasonic cleaner, and standard metrology. Nice to Have * Background in aerospace/defense environments and AS9100 documentation practices, quality standards and processes. • Experience with CNC Mazak and CNC 3-5 multi-axis part geometries.Company DescriptionWe’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.We’re Infinia Search. We’re a relationship-driven search firm that proves that talent, ambition, curiosity, and an infinite work ethic creates exponential results for our clients and candidates.

Insero Talent Solutions has partnered with a manufacturing company in Rochester, NY on their search for a Buyer/Planner. Position Summary The Buyer/Planner for is responsible for sourcing, purchasing, and planning the supply of metal parts, assemblies and components required for production. This role ensures timely procurement and optimal inventory levels to support manufacturing schedules while maintaining cost efficiency and quality standards. The Buyer/Planner works closely with suppliers, engineering, production, and quality teams to meet company objectives and customer requirements. Key Responsibilities • Procurement: Source, negotiate, and purchase components from qualified suppliers, ensuring adherence to specifications, quality, and delivery requirements., • Planning: Develop and maintain production and inventory plans to meet manufacturing demands and minimize stockouts or excess inventory., • Supplier Management: Evaluate and select suppliers, monitor performance, and cultivate strong relationships to ensure reliable supply and continuous improvement., • Order Management: Issue purchase orders, track order status, and expedite deliveries as needed to meet deadlines., • Cost Control: Analyze costs, negotiate pricing, and implement cost-saving initiatives without compromising quality., • Quality Assurance: Collaborate with quality and engineering teams to resolve issues, support inspections, and ensure that all purchased components meet required standards., • Data Management: Maintain accurate records of procurement activities, supplier performance, and inventory levels using ERP and reporting systems., • Continuous Improvement: Recommend and implement process improvements in purchasing and planning practices. Required Qualifications • Bachelor’s degree in Supply Chain Management, Business, Engineering, or a related field (or equivalent experience)., • 2+ years of experience in procurement, planning, or supply chain roles—preferably in a manufacturing environment., • Proficiency in ERP/MRP systems and Microsoft Office Suite., • Excellent negotiation, organizational, and communication skills., • Ability to analyze data, solve problems, and make decisions in a fast-paced environment., • Attention to detail and commitment to continuous improvement. Skills and Competencies • Strong understanding of metal fabrication processes, materials, and quality standards., • Ability to read engineering drawings preferred., • Experience with Microsoft Dynamics 365 Business Central and PowerBI a plus.

Competitive pay + bonuses / Medical, dental & vision / 401k match / PTO - As a Billing A/R Specialist at Red River Software, you will: Set up new contracts within our ERP system and Third-Party online billing software; Prepare customer SaaS and maintenance renewal quotes in a timely and accurate man