High school diploma jobs in Jacksonville, Florida - Page 9Create job alerts

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Jacksonville, FL, Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Minimum Education: • Works with a team supporting cabling, equipment, and C5ISR system installations\n, • Read and understand shipboard installation drawings, diagrams, blueprints, and cable running sheets.\n, • Demonstrate skill in the operation of all commonly used installation test equipment, including spectrum analyzers, voltmeters, VSWR meters, Bit-Error Rate Test Sets, and Category 5e/6 cable testers.\n, • Demonstrate advanced speed and accuracy when performing tasks such as attaching fiber optic connectors, RJ-45 connectors, and DB type connectors, and when dressing cable installations so that the finished product presents a well-organized and professional appearance.\n, • Demonstrate superior skills in complex mechanical, sub-assembly, rack and chassis assembly\n, • Demonstrate your leadership abilities\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in Jacksonville, FL but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • Applicants selected will be subject to a government security investigation and may meet eligibility requirements, including U.S. Citizenship, for access to classified information; eligibility for clearance is required.\n, • You must pass a background investigation\n, • You must have a valid driver's license\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Abilities: • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time., • Relocates a 12 foot stepladder without assistance., • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders., • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis., • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English., • May use a standard ladder without exceeding the weight limit while carrying tools., • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem., • Apply general rules to specific problems to produce answers that make sense., • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events)., • See details at close range (within a few feet of the observer)., • Listen to and understand information and ideas presented through spoken words and sentences.

Kelly® in Partnership with Johnson and Johnson Vision has exciting opportunities to work in the vision care manufacturing industry! Look no further than our open positions for Manufacturing Machine Technician in Jacksonville, Florida. \n \nPerks of the job:\n\n\t • Access to on-site facilities including gym, clinic, cafeteria & tuition assistance!\n\t, • Work in an air-conditioned manufacturing environment\n\t, • All tools provided\n\nShift Details:\n\n\n\t, • Night: 6:00 PM to 6:00 AM Rotating – $25.76/hr\n\t, • Day: 6:00 AM to 6:00 PM Rotating – $23.00/hr\n\t, • 3 days on, 2 days off, 2 days on and 3 days off\n\t, • Shift Differential and Overtime Opportunities\n\nKey Responsibilities:\n\n\n\t, • Operate and maintain production equipment to ensure efficient and effective production\n\t, • Conduct routine equipment maintenance, troubleshooting, and repairs minimizing down time\n\t, • Collaborate with the production team to resolve technical issues and improve processes\n\t, • Ensure compliance with safety procedures and quality standards\n\t, • Provide support to other departments as required\n\nRequired Experience:\n\n\n\t, • High School Diploma or GED\n\t, • Strong mechanical and electrical aptitude and troubleshooting skills\n\t, • Maintenance or engineering experience – 2-years or more\n\t, • Ability to read and interpret technical drawings and schematics\n\t, • Health care coverage options \n\t, • Weekly electronic pay options \n\t, • 3,000 free online training courses and college tuition discounts \n\t Find what’s next with Kelly®. As a worker today, it’s up to you to take charge of your career and look for opportunities to learn, grow, and achieve your potential. Helping you find what’s next is what we’re all about. We know what’s going on in the evolving world of work-just ask the 440,000 people we employ each year. Connecting with us means getting the support, guidance, and opportunities needed to take your career where you may have never imagined.\n\t\t\t \n\t\t\t \n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\n\t\t\t\t About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. \n\t\t\t \n\t\t\t

At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at jnj.com. As guided by Our Credo, Johnson & Johnson is responsible to our employees who work with us throughout the world. We provide an inclusive work environment where each person is considered as an individual. At Johnson & Johnson, we respect the diversity and dignity of our employees and recognize their merit. Job Function: Supply Chain Manufacturing Job Sub Function: Manufacturing Assembly Job Category: Business Enablement/Support All Job Posting Locations: Jacksonville, Florida, United States of America Job Description: About Vision Fueled by innovation at the intersection of biology and technology, we're developing the next generation of smarter, less invasive, more personalized treatments. Are you passionate about improving and expanding on the possibilities of vision treatments? Ready to join a team that's reimagining how vision is improved? Our Vision team solves the toughest health challenges. Help combine cutting-edge insights, science, technology, and people to encourage eye care professionals and patients to proactively protect, correct and enhance healthy sight for life. Our products and services address these needs - from the pediatric to aging eye - in a patient's lifetime. Your unique talents will help patients on their journey to wellness. Learn more at At Johnson & Johnson, we believe health is everything. Our strength in healthcare innovation empowers us to build a world where complex diseases are prevented, treated, and cured, where treatments are smarter and less invasive, and solutions are personal. Through our expertise in Innovative Medicine and MedTech, we are uniquely positioned to innovate across the full spectrum of healthcare solutions today to deliver the breakthroughs of tomorrow, and profoundly impact health for humanity. Learn more at . We are searching for the best talent for Manufacturing Technician II. Our Manufacturing Technicians are on the front line of innovative technology. They are responsible for the safe operations of our fully automated production line performing all responsibilities vital to operate, adjust, and maintain equipment. Investigate alternative methods and procedures to reduce variability and improve equipment reliability. Abide to manufacturing guidelines, policies, and operations run rules. Maintains compliance in safety, quality, and production. Complete all performance and development activities. Demonstrates behaviors consistent with Johnson and Johnson Standards of Leadership. Key Responsibilities: \n • Meets all requirements from level I.\n, • Intermediate level position qualified on designated generation line qualification.\n, • Perform routine cleaning, clearing of equipment jams, insert of raw materials, equipment adjustments, mechanical equipment repairs, and troubleshoot equipment failures.\n, • Completes line audits and best practice worksheet.\n, • Provide technical, process and line management training to level II and/or below manufacturing technicians.\n, • Complete preventive maintenance (PM) tasks as scheduled.\n, • Recognize Carton, Foil, Primary Package and Sterilizer non-conformances, perform the root cause investigation and apply corrective actions to resolve nonconformance recurrence.\n, • Record all equipment downtime, machine repairs, audits, and non-conformance events in maintenance management system.\n, • Understands and can communicate all processes and systems involved in the manufacturing process qualified in and updates manufacturing line boards as needed.\n, • Conducts manufacturing document reviews, updates document and reviews with supervisor.\n, • Assist in the design of experiments, corrective and preventive actions (CAPA), protocols, validations, and all other projects supporting the business.\n, • Demonstrate proficiency in process troubleshooting or line management fundamentals.\n\n Qualifications Education: • A High school diploma required, associate degree or, equivalent highly preferred.\n Experience and Skills: Required: \n • A minimum of two (2) years of relevant technical/vocational shown experience required.\n, • Ability to prioritize projects and balance multiple tasks.\n, • Proficient interpersonal skills, both written and verbal.\n, • This position will require you to complete the Ramsay Mechanical Proficiency Test.\n, • Physical demands of the position include stooping, walking, pulling, light lifting (up to 25 lbs.), grasping, hearing, visual acuity, kneeling, reaching, pushing, talking, standing, and crawling.\n, • At least four (4) years of college, trade, or military training in a technical field or equivalent industrial experience.\n, • Good understanding and solving skills in the following areas: Process Improvement, Programmable Logic Controller systems, electro/mechanical devices, robotic/servo systems, safety devices, equipment installation, debug and qualification, control circuitry development, electro-mechanical solving/repair, equipment prototyping, production start-up, equipment process development and mechanical devices, controller, mechanical part's design, tooling experience, electrical & mechanical prints.\n, • Great understanding of the term associated and purpose of Lean Six Sigma.\n, • Proficient with applying the principles in reducing process variations.\n\n Johnson & Johnson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status or other characteristics protected by federal, state or local law. We actively seek qualified candidates who are protected veterans and individuals with disabilities as defined under VEVRAA and Section 503 of the Rehabilitation Act. Johnson & Johnson is committed to providing an interview process that is inclusive of our applicants' needs. If you are an individual with a disability and would like to request an accommodation, external applicants please contact us via . Internal employees contact AskGS to be directed to your accommodation resource. #LI-Onsite Required Skills: Preferred Skills: Administrative Support, Agile Manufacturing, Assembly Operations, Communication, Execution Focus, Factory Acceptance Test (FAT), Good Manufacturing Practices (GMP), Innovation, Learning Agility, Manufacturing Processes, Manufacturing Science and Technology (MSAT), Mechanical Equipments, Plant Operations, Process Oriented, Prototyping, Repair Management, Structural Fabrication, Technologically Savvy

At T-Mobile, we invest in YOU! Our Total Rewards Package ensures that employees get the same big love we give our customers. All team members receive a competitive base salary and compensation package - this is Total Rewards. Employees enjoy multiple wealth-building opportunities through our annual stock grant, employee stock purchase plan, 401(k), and access to free, year-round money coaches. That’s how we’re UNSTOPPABLE for our employees! Job Overview This role supports retail operations by engaging customers and facilitating their technology and service needs in a fast-paced environment. It involves building product knowledge, demonstrating technology solutions, and assisting customers throughout their shopping journey. The role requires developing skills in customer interaction, digital tool usage, and service plan recommendations. Success is measured by customer satisfaction, proficiency in product knowledge, and effective use of digital resources. The work enhances customer experience and supports organizational goals by fostering strong customer relationships and loyalty. Job Responsibilities: • Develop proficiency in customer service and sales to deliver personalized technology and service solutions that meet individual needs, • Utilize digital tools to demonstrate network coverage, service plans, and product features to enhance customer understanding and engagement, • Complete required training to build knowledge of retail processes, systems, and wireless technology innovations, • Collaborate with colleagues across channels to support a seamless customer experience and contribute to team initiatives, • High School Diploma/GED (Required), • Passionate customer advocate with the desire to be yourself when connecting and having fun doing it! (Required), • Competitive drive and proven ability to succeed in a fast-paced sales environment. (Required), • Willingness to work alongside peers and store leaders, learning and sharing ideas, while serving customers and providing resolutions to issues. (Required), • Effective at balancing customer needs and performance goals. (Required), • At least 18 years of age DOT Regulated: DOT Regulated Position (Yes/No): No Safety Sensitive Position (Yes/No): No Hourly Base Pay: $18.00, plus $5.00 per hour training pay. Within the first 90 days working at T-Mobile, Mobile Associates receive on-the-job training and are eligible for hourly training pay. Once completed, Mobile Associates promote to the Mobile Expert role and become eligible for an annualized incentive target of $18,000/year. Actual incentives vary based on performance and full-time status. All employees at T-Mobile are guaranteed to earn $20/hour inclusive of base pay and incentives. And since we are ALL owners, EVERY employee at T-Mobile is eligible for an Annual Stock Grant. At T-Mobile, our benefits exemplify the spirit of One Team, Together! A big part of how we care for one another is working to ensure our benefits evolve to meet the needs of our team members. Full and part-time employees have access to the same benefits when eligible. We cover all of the bases, offering medical, dental and vision insurance, a flexible spending account, 401(k), employee stock grants, employee stock purchase plan, paid time off and up to 12 paid holidays - which total about 4 weeks for new full-time employees and about 2.5 weeks for new part-time employees annually - paid parental and family leave, family building benefits, back-up care, enhanced family support, childcare subsidy, tuition assistance, college coaching, short- and long-term disability, voluntary AD&D coverage, voluntary accident coverage, voluntary life insurance, voluntary disability insurance, and voluntary long-term care insurance. We don't stop there - eligible employees can also receive mobile service & home internet discounts, pet insurance, and access to commuter and transit programs! To learn about T-Mobile’s amazing benefits, check out . Never stop growing! As part of the T-Mobile team, you know the Un-carrier doesn’t have a corporate ladder–it’s more like a jungle gym of possibilities! We love helping our employees grow in their careers, because it’s that shared drive to aim high that drives our business and our culture forward. By applying for this career opportunity, you’re living our values while investing in your career growth–and we applaud it. You’re unstoppable! T-Mobile USA, Inc. is an Equal Opportunity Employer. All decisions concerning the employment relationship will be made without regard to age, race, ethnicity, color, religion, creed, sex, sexual orientation, gender identity or expression, national origin, religious affiliation, marital status, citizenship status, veteran status, the presence of any physical or mental disability, or any other status or characteristic protected by federal, state, or local law. Discrimination, retaliation or harassment based upon any of these factors is wholly inconsistent with how we do business and will not be tolerated. Talent comes in all forms at the Un-carrier. If you are an individual with a disability and need reasonable accommodation at any point in the application or interview process, please let us know by emailing or calling 1-844-873-9500. Please note, this contact channel is not a means to apply for or inquire about a position and we are unable to respond to non-accommodation related requests.

Description Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is seeking NDT Level II Techs & NDT Assistants/Trainees to support our Jacksonville, FL office. Responsibilities/Duties: NDT Assistants/Trainees • Perform tasks as directed in order to prepare components or equipment for inspections., • Work alongside certified technicians to help complete projects and learn activities., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Interface with personnel to determine scope of work and work priorities in order to meet customer expectations., • Help clean and organize equipment before, during, and at the completion of projects., • Document on job training experience as assigned by management., • Perform other job related tasks as assigned by supervisors. \n Responsibilities/Duties: NDT Level II Technicians • Perform examinations of materials in accordance with procedures, codes, standards, and specifications., • Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees, • Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations., • Be able to prepare written instructions and to organize and report the results of examinations., • Work independently and support team members Perform other job related tasks as needed and assigned by supervisors. \n Qualifications Minimum: Requirements/Qualifications: • NDT Assistants/Trainees High School Diploma, GED, or equivalent; math and print reading skills; ability to used computers for data entry and report writing; Applicants with documented prior NDT classroom training or OJT preferred., • NDT Level II Technicians Meet the minimum requirements of an NDT Assistant/Trainee; provide documentation of education, training, and experience in the applicable NDT method(s); have a working knowledge of industrial environments and general manufacturing processes; ability to effectively communicate with other departments, and customers to report issues and solve problems. \n All applicants require the following: • Ability to learn and comply with all company policies and procedures., • Excellent communication skills written and verbal., • Applicants must pass a drug screen and have a valid drivers license with a clean driving record., • U.S. Persons Only: A requirement of this position is access to information that is subject to U.S. export controls under the U.S. International Traffic in Arms Regulations (ITAR). Accordingly, the company will consider only U.S. Persons for this position. A U.S. Person includes (a) U.S. citizens or nationals; (b) U.S. lawful permanent residents (i.e., green card holders); (c) persons granted refugee status; or (d) persons granted asylum in the United States. This information is collected solely for purposes of complying with U.S. export control requirements and will not be used to unlawfully discriminate in the hiring process. \n Work Conditions: • Must be able to wear safety equipment as required by the safety department for personal protection., • Work from heights on scaffolding, ladders, elevated platforms, man-baskets, etc., • Work in confined spaces which will require crawling, stooping, climbing, etc., • Work in around operating equipment and industrial environments., • Work with radiation and hazardous materials such as cleaners, penetrants, film developing chemicals, etc., • Work shifts up to 12 hours/day and 7 days/week and travel for extended periods of time, • Ability to lift and carry 100 pounds. \n Benefits: ATS offers excellent wages and advancement opportunities. ATS full-time employee benefits include: medical, dental, vision, 401k, vacation, personal time, and bonuses. EOE/AA/M/F/Vet/Disabled Applied Technical Services is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Job Description YOUTH DEVELOPMENT PROFESSIONAL-HEALTH & WELLNESS (S.P Livingston Elementary) This position is designed to develop young people’s capacity to engage in positive behaviors to nurture their well-being, set personal goals and grow into self-sufficient adults. The Health & Wellness Youth Development Professional is part of a team-oriented Club staff dedicated to serving our youth and creating an optimal Club Experience. This position will plan, supervise and implement a variety of high-yield activities and targeted programs within a health and life skills focus. This position is responsible for: ensuring youth development principles are incorporated into programs and activities; providing guidance and discipline to ensure a safe and positive environment for youth; ensuring the incorporation of character development, age appropriate and gender-specific programs and activities; ensuring that cultural diversity educational programs are implemented; assisting, as needed, in the planning, implementation, and delivery of educational activities and programs for youth ages 6 to 18. KEY ROLES (Essential Job Responsibilities): Prepare Youth for Success This position primary responsibilities are: • Planning and implementing a variety of health and life skills programs for members of all ages, including Cybersafety, Date SMART, Passport to Manhood, Be a Star, UPS Road Code, SMART Girls, SMART Moves, Street SMART & Triple Play: Healthy Habits, • Recruiting and retaining youth for the health and life skills programs, • Working with other staff in the club to help implement these programs throughout the school year, • Ensure programs, services and activities prepare youth for success, promoting safety of members, quality in programs and appearance of Club at all times. Provide guidance and role modeling to members., • Contribute to the planning and implementation of the strategic plan by:, • Planning and organizing a range of program services and activities for members, such as field trips, program specific activities, guest speakers, field trips, etc., • Initiating new programs with the approval of the Program Director/Unit Director., • Promoting and stimulating program participation., • Ensure quality improvement by monitoring and evaluating program achievement against target goals, recommending modifications that respond to member needs and interests and participating in weekly Club staff meetings., • Ensure a healthy and safe environment, supervising members in program area., • Maintain the cleanliness of program area., • Prepare weekly reports for the Program Director/Unit Director regarding activities, special programs, upcoming events, attendance, and other reports as required., • May participate in additional special programs and/or events., • Evenings/weekend work may be involved., • May be required to drive Club van., • (Requires valid driver’s license & three-year clean driving record) Internal: Maintains close, daily contact with club staff and volunteers, club members, and supervisor to receive/provide information, discuss issues, explain guidelines/instructions; instruct; and advise/counsel. Requirements Education High School diploma or GED Ability to pass DCF Level II background screening and drug test Experience • Knowledge of youth development, • Ability to motivate youth and manage behavior issues, • Ability to work with the public, • Ability to plan and implement quality programs specific to Health & Wellness This position generally works M – F, 2PM – 7PM, but may require longer hours outside of this schedule and occasional weekends when necessary. Work is conducted indoors and outdoors. PHYSICAL AND MENTAL REQUIREMENTS: • Ability to sit, stand and walk for long periods of time; bending and squatting on occasion, • Ability to lift to 20 lbs. on occasion, • Ability to hear at a normal conversational level, • Ability to maintain high energy level when necessary, • High degree of emotional intelligence The Boys and Girls Clubs of NE Florida is an Equal Employment Opportunity Employer and Drug Free Workplace. To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.

Job Description Sports & Recreation (YDP) - Clanzel Brown Teen Center This position is designed to help members develop physical fitness, reduce stress, promote a positive use of leisure time, appreciate the environment, and improve interpersonal skills. The Sports & Recreation Youth Development Professional is part of a team-oriented Club staff dedicated to serving our youth and creating an optimal Club Experience. This position will plan, supervise, and implement a variety of high-yield activities and targeted programs within a health and life skills focus. This position is responsible for: ensuring youth development principles are incorporated into all programs and activities; providing guidance and discipline to ensure a safe and positive environment for youth; ensuring the incorporation of character development, age appropriate and gender-specific programs and activities; ensuring that culturally diverse programs are implemented; assisting, as needed, in the planning, implementation, and delivery of activities and programs for youth ages 6 to 18. KEY ROLES (Essential Job Responsibilities): Prepare Youth for Success This position's primary responsibilities are: • Planning and implementing a variety of sports and recreation programs for members of all ages, including Triple Play, Play Ball, RBI, ALL STARS, Jr. RBI, & Play Breaks, • Recruiting and retaining youth for sports programs, • Working with other staff in the club to help implement these programs throughout the school year, • Ensure programs, services and activities prepare youth for success, promoting the safety of members, the quality of programs, and the appearance of the Club at all times. Provide guidance and role modeling to members., • Contribute to the planning and implementation of the strategic plan by:, • Planning and organizing a range of program services and activities for members, such as field trips, program-specific activities, guest speakers, field trips, etc., • Initiating new programs with the approval of the Program Director/Unit Director., • Promoting and stimulating program participation., • Ensure quality improvement by monitoring and evaluating program achievement against target goals, recommending modifications that respond to member needs and interests and participating in weekly Club staff meetings., • Ensure a healthy and safe environment, supervising members in the program area., • Maintain the cleanliness of the program area., • Prepare weekly reports for the Program Director/Unit Director regarding activities, special programs, upcoming events, attendance, and other reports as required., • May participate in additional special programs and/or events., • Evenings/weekend work may be involved., • May be required to drive the Club van., • (Requires valid driver’s license & three-year clean driving record) Internal: Maintains close, daily contact with club staff and volunteers, club members, and supervisor to receive/provide information, discuss issues, explain guidelines/instructions; instruct; and advise/counsel. Requirements Education High School diploma or GED Ability to pass DCF Level II background screening and drug test Experience • Knowledge of youth development, • Ability to motivate youth and manage behavior issues, • Ability to work with the public, • Ability to plan and implement quality programs specific to Sport and Recreation This position generally works 2.5 to 3 hours per day, M–F, between the hours of 2:00 PM – 7:00 PM, but may require longer hours outside of this schedule when necessary. Work is conducted indoors. PHYSICAL AND MENTAL REQUIREMENTS: • Ability to sit, stand, and walk for long periods; bending and squatting on occasion, • Ability to lift to 20 lbs. on occasion, • Ability to hear at a normal conversational level, • Ability to maintain a high energy level when necessary, • High degree of emotional intelligence Boys & Girls Clubs of Northeast Florida is an Equal Employment Opportunity Employer and Drug Free Workplace. To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. This position requires a Level 2 background screening through the Care Provider Background Screening Clearinghouse as mandated by Florida Statute 435.12. For more information, please visit the Clearinghouse Applicant Education and Awareness website:

Job DescriptionYOUTH DEVELOPMENT PROFESSIONAL - HEALTH & WELLNESS (Biscayne Elementary) This position is designed to develop young people’s capacity to engage in positive behaviors to nurture their well-being, set personal goals and grow into self-sufficient adults. The Health & Wellness Youth Development Professional is part of a team-oriented Club staff dedicated to serving our youth and creating an optimal Club Experience. This position will plan, supervise and implement a variety of high-yield activities and targeted programs within a health and life skills focus. This position is responsible for: ensuring youth development principles are incorporated into programs and activities; providing guidance and discipline to ensure a safe and positive environment for youth; ensuring the incorporation of character development, age appropriate and gender-specific programs and activities; ensuring that cultural diversity educational programs are implemented; assisting, as needed, in the planning, implementation, and delivery of educational activities and programs for youth ages 6 to 18. KEY ROLES (Essential Job Responsibilities): Prepare Youth for Success This position primary responsibilities are: • Planning and implementing a variety of health and life skills programs for members of all ages, including Cybersafety, Date SMART, Passport to Manhood, Be a Star, UPS Road Code, SMART Girls, SMART Moves, Street SMART & Triple Play: Healthy Habits, • Recruiting and retaining youth for the health and life skills programs, • Working with other staff in the club to help implement these programs throughout the school year, • Ensure programs, services and activities prepare youth for success, promoting safety of members, quality in programs and appearance of Club at all times. Provide guidance and role modeling to members., • Contribute to the planning and implementation of the strategic plan by:, • Planning and organizing a range of program services and activities for members, such as field trips, program specific activities, guest speakers, field trips, etc., • Initiating new programs with the approval of the Program Director/Unit Director., • Promoting and stimulating program participation., • Ensure quality improvement by monitoring and evaluating program achievement against target goals, recommending modifications that respond to member needs and interests and participating in weekly Club staff meetings., • Ensure a healthy and safe environment, supervising members in program area., • Maintain the cleanliness of program area., • Prepare weekly reports for the Program Director/Unit Director regarding activities, special programs, upcoming events, attendance, and other reports as required., • May participate in additional special programs and/or events., • Evenings/weekend work may be involved., • May be required to drive Club van., • (Requires valid driver’s license & three-year clean driving record) Internal: Maintains close, daily contact with club staff and volunteers, club members, and supervisor to receive/provide information, discuss issues, explain guidelines/instructions; instruct; and advise/counsel. Requirements Education High School diploma or GED Ability to pass DCF Level II background screening and drug test Experience • Knowledge of youth development, • Ability to motivate youth and manage behavior issues, • Ability to work with the public, • Ability to plan and implement quality programs specific to Health & Wellness This position generally works M – F, between the hours of 2PM – 7PM, but may require longer hours outside of this schedule and occasional weekends when necessary. Work is conducted indoors and outdoors. PHYSICAL AND MENTAL REQUIREMENTS: • Ability to sit, stand and walk for long periods of time; bending and squatting on occasion, • Ability to lift to 20 lbs. on occasion, • Ability to hear at a normal conversational level, • Ability to maintain high energy level when necessary, • High degree of emotional intelligence The Boys and Girls Clubs of NE Florida is an Equal Employment Opportunity Employer and Drug Free Workplace. To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.

About the Job We're a global leader in providing energy solutions that help businesses grow and communities thrive. We work as a team and we're proud of the difference we make to customers, to local communities, and towards a sustainable future for the world. We're looking for a Lead HVAC or Power Technician in Jacksonville, FL. - a role that will help us to power progress for our customers. Why Aggreko? Here are some of the perks and rewards. \n • Full-time with potential for overtime and/or weekends.\n, • Annual bonus program.\n, • No premium cost medical plan option available.\n, • Robust technical training programs, in person and virtual, on diesel, gas, compressed air, electrical, controls, oil free air compressors, HVAC, microgrid & storage and more.\n, • Career growth opportunities and tuition reimbursement available, safety-focused culture working on brand new technology.\n\n What you'll do: \n • You'll be based out of our Jacksonville, FL.service center.\n, • You'll have an opportunity to work overtime and weekends.\n, • Perform preventive maintenance and repairs of power generators, diesel engines, electrical distribution equipment, HVAC equipment and/or oil free air compressors.\n, • Troubleshoot equipment failures at the shop and handle the repairs.\n, • You will either be out on your own or teamed up with another technician(s) to set up and operate equipment at the shop.\n\n You'll have the following skills and experience: \n • High School diploma/GED or equivalent work experience.\n, • 3+ years of experience working on power generators and/or commercial HVAC equipment, performing inspections, maintenance, and repairs.\n, • Experience with calculating nominal and effective tonnage and/or kW requirements, along with reading and knowing schematics.\n, • Based on the customer requirements, you may be required to obtain and maintain a TWIC card or valid DOT medical card.\n, • Ability to move or lift objects, typically less than 50 lbs.\n, • Valid driver's license.\n\n Find out more and apply now. Bring your energy. Grow your career. #LI-JP1 About the Company We are a Temporary power solution companies that work with HVAC such as heating, AC, chillers, boilers. We also have Diesel and Natural gas generators and electricians. Aggreko works in different industries such as agriculture, oil and gas, construction and more. We are 6,000 employees globally and growing and would love for you to join the team. I am a Recruiter with Aggreko and look forward to talking with you.

Want to build a brighter, bolder future and cultivate your career? Join Ecolab’s team and help create a world in which we all thrive. EcoSure, the brand protection division of Ecolab, partners with global brands to create an end-to-end brand protection strategy. Through a collaborative approach to on-site assessments, coaching, digital learning and industry best practices, we create a unique program that encompasses the critical components of any operation. EcoSure conducts more than 500,000 assessments annually in 140+ countries around the world. The results are real-time insights and actionable steps that mitigate brand risk and optimize guest experience. Ecolab is seeking a Brand Protection Advisor to join our team in Jacksonville, FL. As a Brand Protection Advisor, you’ll deliver on-site evaluations, coaching, and insights that elevate food safety, guest experience, workplace safety, and operational excellence. You’ll partner with clients to identify risks, reinforce brand standards, and drive continuous improvement, making a measurable impact on public health and customer satisfaction. How You’ll Make an Impact: * Conduct a variety of brand protection visits at client locations using a foundation of consulting, coaching, and training to meet the unique expectations and program requirements of the clients and help protect their brand and delight their guests * Develop and deliver summary presentations of assessment findings, areas of improvement, and recommendations to client leadership * Partner with other EcoSure and Ecolab teams to solve client challenges * Complete a budgeted number of visits each week, delivering an exceptional client experience * Utilize an iPad, Microsoft Suite, and Customer Relationship Management (CRM) technology to ensure efficient planning and perform essential job functions * Support the growth initiatives of our company and our clients * Adhere to HIPAA guidelines (where applicable) while completing operational visits within hotels, restaurants, convenience stores, the education sector, healthcare and senior living facilities by interacting with staff and residents Position Details: * Candidate must reside within a commutable distance of Jacksonville, FL * Percent of overnight travel required: 50% * Position requires the ability to work occasional evenings, weekends, and overtime as business needs dictate * Based on customer requirements, obtaining ServSafe and/or CP-FS certification(s) may be a condition of continued employment What’s Unique About This Role: * The support of an organization that believes it is vital to include and engage diverse people, perspectives and ideas to achieve our best * Paid training program that includes job shadowing, e-learning modules, structured field activities, and customized classroom-style training * Company-paid vehicle for business and personal use, where applicable * Plan and manage your schedule in an independent work environment * Be part of a company that values a culture of safety that includes top-notch safety training and personal protective equipment Minimum Qualifications: * High school diploma * Two years of hospitality industry-related experience * Position requires a current and valid Driver’s License with no restrictions * Due to the nature and hours of the work, must be 21 years of age or older * No Immigration Sponsorship available for this position Physical Requirements of Position: * Being around, touching and potentially consuming food made from or with animal products and/or top allergens * Lifting and carrying 25 pounds * Inspecting client playgrounds by climbing, crawling in tight areas and going down tube slides * Bending, squatting, shifting and adjusting movement to assess areas low to the ground and above the head * Standing and walking for extended periods of time in client locations * Driving and/or flying to client locations as needed; you are responsible to have the proper documentation to fly such as a Real ID or other acceptable form of identification * Driving a company-paid vehicle as required to perform job duties (pre-employment and ongoing motor vehicle record checks will be performed to determine eligibility to drive a company vehicle) Ecolab is committed to providing reasonable accommodation to qualified individuals with a disability. Preferred Qualifications: * Bachelor’s degree in culinary, hospitality or business field * Multilingual (Spanish & French preferred) * High-level customer service and advanced consultative skills * Ability to work well under pressure, juggle tasks and work efficiently against deadlines * Strong planning and organizational skills and high attention to detail * Ability to work effectively without supervision, show initiative, good judgment, and superior decision-making and problem-solving skills What’s in it For You: * Starting on Day 1: Access to our comprehensive benefits package including medical, dental, vision, matching 401K, company-paid pension, stock purchase plan, paid parental leave, select discounted childcare resources, and more! * The opportunity to take on some of the world’s most meaningful challenges, helping customers achieve clean water, safe food, and healthy environments * The ability to make an impact and shape your career with a company that is passionate about growth * The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best About Ecolab: At Ecolab, we prioritize our talent-first philosophy by creating the most capable and diverse team to excel at our nearly three million customer sites. Building on a century of innovation, our 48,000 associates help deliver comprehensive science-based solutions, data-driven insights and world-class service to advance food safety, maintain clean and safe environments, and optimize water and energy use, and improve operational efficiencies and sustainability for customers in the food, healthcare, life sciences, hospitality and industrial markets in more than 170 countries around the world. Our solutions not only enhance operational efficiency but also contribute to sustainability and public health, making a positive impact on the world. We are committed to eliminating unnecessary complexities and embracing a beginner's mindset, continuously seeking new perspectives and innovative solutions to stay ahead in a rapidly changing world. Annual or Hourly Compensation Range The pay range for this position is $48,700-$73,000. Many factors are taken into consideration when determining compensation, such as experience, education, training, geography, etc. We comply with all minimum wage and overtime laws. Benefits Ecolab strives to provide comprehensive and market-competitive benefits to meet the needs of our associates and their families. Click here to see our benefits. If you are viewing this posting on a site other than our Ecolab Career website, view our benefits at jobs.ecolab.com/working-here. Potential Customer Requirements Notice To meet customer requirements and comply with local or state regulations, applicants for certain customer-facing roles may need to: • Undergo additional background screens and/or drug/alcohol testing for customer credentialing., • Be fully vaccinated for COVID-19, including a booster if eligible, unless a religious or medical accommodation is requested by the applicant and approved by Ecolab. Americans with Disabilities Act (ADA) Ecolab will provide reasonable accommodation (such as a qualified sign language interpreter or other personal assistance) with our application process upon request as required to comply with applicable laws. If you have a disability and require accommodation assistance in this application process, please visit the Recruiting Support link in the footer of each page of our career website. Our Commitment to a Culture of Inclusion & Belonging \nAt Ecolab, we believe the best teams are inclusive. We are on a journey to create a workplace where every associate can grow and achieve their best. We are committed to fair and equal treatment of associates and applicants and recruit, hire, promote, transfer and provide opportunities for advancement based on individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any associate or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. \n In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). \n We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York City Fair Chance Act.

TOGETHER, WE SAVE LIVES OVERVIEW Support production operations through maintenance, repair, overhaul, assembly, disassembly, installation and inspection of all production equipment specifically for the BODY/SOFT ARMOR group that will involve pneumatic pumps, pressure valves, cutting and sewing machines. Perform facility maintenance to ensure proper equipment and building operations. RESPONSIBILITIES \n • Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions.\n, • Locates sources of problems by observing mechanical and pneumatic pump devices in operation; listening for problems; using precision measuring and testing instruments.\n, • Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance.\n, • Access to machine shop instrumentation and equipment (mill/lathe/cnc) to fabricate & repair parts.\n, • Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments.\n, • Repairs or replaces defective parts\n, • Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt.\n, • Conserves maintenance resources by using equipment and supplies as needed to accomplish job results.\n, • Maintains safe and clean working environment by complying with procedures, rules, and regulations.\n, • Maintain a safe working environment through timely repair and inspection of equipment\n, • Utilizes knowledge of fundamental electrical, carpentry, plumbing or heating and cooling skills in performing assignments\n, • Operates common hand tools \n, • Annotate equipment logs and work order system to document all maintenance actions\n, • Provides mechanical maintenance information by answering questions and requests.\n, • Train production personnel to perform operator level maintenance\n, • One (1) to Three (3) years related experience in a manufacturing environment with mechanical, pneumatic, hydraulic and electronic experience. \n, • Knowledge of the use of hand tools and power tools\n, • Knowledge of shop operations\n, • Strong root cause analysis/problem solving abilities\n, • Excellent written and verbal communication skills\n, • High level of internal customer service\n, • Ability to work in conjunction with other employees\n, • Ability to follow through and complete assignments and projects in a timely manner\n, • Attention to detail\n, • Ability to read and interpret manuals and drawings of machine tools and equipment is required\n, • Equipment maintenance\n, • Good mechanical skills\n, • PC skills\n, • Ability to lift 40 lbs.\n, • Work with minimal supervision\n, • Flexibility in work schedule to meet changing production needs\n, • High School Diploma or General Education Degree (GED) or vocational training in maintenance mechanics or related field.\n\n Why work at Safariland? At Safariland our colleagues are some of the best and brightest in the industry and we are seeking new team members who exhibit the diverse competencies that will drive The Safariland Group to even greater success while maintaining our culture of being a great place to work. We believe innovation drives winning performance and we constantly challenge ourselves to be the very best in every aspect of our business. We cultivate a work culture driven by our 4 core values; integrity, curiosity, excellence and empowerment and we want associates to be involved in their work and communities so they can achieve their highest level of wellbeing. That is why Safariland offers a comprehensive suite of benefits to promote health and financial security for eligible employees and their families. Eligible employees are offered: \n • Medical, dental & vision insurance\n, • 401(k) with company match\n, • Employer paid life insurance and AD&D\n, • Employer paid disability\n, • Wellness program\n, • Adoption assistance\n, • Tuition assistance\n, • Employee assistance program\n, • Work life balance\n For those applicants with disabilities, if you require reasonable accommodation in searching for a job opening or submitting an application, please contact us by calling 888-469-6455. All employment decisions are solely based on the applicant's qualifications as they relate to the requirements of the position.

MISTRAS Group, Inc. is seeking Full time NDT Level II MT/PT/UTT Techs for our Jacksonville, FL. lab. Must be local Applicants must be able to provide the following Documents: • High School Diploma/GED/Degree, • Proof of classroom hours/Training in NDT, • Set up and calibrate equipment, • Conduct tests with appropriate NDT technique(s)., • Interpret, evaluate and document, • Must be thoroughly familiar with the scope and limitations of the method in which certified and capable of directing the work of trainees and Level I, • Must be familiar with the codes, standards and other contractual documents that control the method as utilized by the, • Work with minimal, • Identify and resolve problems in a timely, • Obtain and analyze information, • High School graduate or equivalent, • Graduate of a specialized NDT technical program meeting SNT-TC1A for the following is required: MT/PT/UTT, • Prior certification as an NDE Level II with one (1) year experience or prior certification as an NDE Level I technician with adequate field experience hours to certify to Level II per SNT-TC1A, • To perform the job successfully, an individual should demonstrate the following competencies to perform the essential functions of this position;, • Problem Solving ~ Identify and resolve problems in a timely manner. Obtain and analyze information, • Oral Communication ~ Speak clearly and persuasively in positive or negative, • Written Communication ~ Edit and present numerical data, • Interpersonal Skills ~ maintain confidentiality., • Planning / Organization ~ Prioritize and plan work activities using time, • Adaptability ~ Ability to adapt to changes in the work environment. Manage competing demands and able to deal with frequent change, delays and/or unexpected, • Dependability ~ consistently at work on time, follows instructions, respond to management direction and solicit feedback to improve, • Quality ~ demonstrates accuracy, thoroughness and monitor own work to ensure, • Safety ~ actively promotes safety procedures; use all equipment and materials #LI-GV1 MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Requisition Number: 28922 When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 06/05/2026. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: • Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies, • Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement, • Ability to function effectively as a member of a production team Duties and Responsibilities: • Sort, inspect, clean, paint, label, and refill empty cylinders., • Maintain a safety focus at all times and wear the proper PPE, • Ensure the consistent quality of cylinders are being processed, • Load filled cylinders onto the truck(s) for the next day's shipments., • Ability to stand and walk 8 - 12 hours per day., • Ability to lift 50 pounds repeatedly throughout the day., • Perform general housekeeping duties. Knowledge, Skills and Abilities: • Ability to follow processes, procedures, and instructions, • Ability to function effectively as a member of a production team, • Willingness to grow and learn, • Basic mechanical aptitude, • Basic computer knowledge, • Work in a fast-paced environment, • Be able to stand 8-10 hours per day, • Ability to obtain required state licensing, • 1 - 2 years work experience in manufacturing is preferred, • High School Diploma or GED Working conditions: • Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $15.50 to $16.00 per hour, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

THOR Solutions is actively seeking a Senior-Level Engineering Technician with experience with U.S Naval Air and Surface Search Radars & Electronic Navigation Systems to provide full-time support for the Southeast Regional Maintenance Center (SERMC) in Mayport, FL. The candidate's responsibilities may include (but are not limited to) performing or supporting the following actions:\n • Fleet Technical Assists\n, • Total Ship Readiness Assessment\n, • Monthly Status Reports\n, • Logistic Support\n, • Interpreting technical documents to assess, repair and document deficiencies.\n, • Configuring equipment in alternate structures to meet mission requirements.\n\nLocation: Full Time onsite at Southeast Regional Maintenance Center (SERMC) in Mayport, FL. Travel:Up to 10% travel is anticipated. Typical Physical Activity: Primarily desk/computer work in an office environment. May involve: repetitive motion. Periodic visits to waterfront/shipboard environments. May involve: traversing shipboard environments (e.g., confined spaces, ladders, hatches) or vision. Existing Secret Security Clearance Required: This position requires an existing DoD Secret security clearance. A qualified candidate will already possess an Active or Interim Secret security clearance. An otherwise strongly qualified candidate with highly relevant experience but no current security clearance may be considered. Required Knowledge, Skills, and Abilities:\n • A high school diploma, GED equivalent, or a relevant U.S. Navy technical school diploma.\n, • At least ten (10) years of relevant electrical experience within the last fifteen (15) years in the operation, repair, maintenance and assessment of U.S. Naval Air and Surface Search Radars & Electronic Navigation Systems to include but not limited to:\n, • Air Search Radars (AN/SPS-49, AN/SPS-73, AN/SPS-48G, TACAN)\n, • Surface Search Radars (AN/SPS-67, AN/SPS-73(V)12, AN/SPS-55)\n, • Navigation Equipment (WSN 7/7A/7B Gyrocompasses, Digital Electromagnetic Log (DEML/WSN-8), Digital Hybrid Speed Log (DYHSL/WSN-9), Digital Magnetic Flux Gate Compass).\n\n\n, • Demonstrate a working knowledge of Navy assessment programs, visit processes and reporting methods for visits.\n, • Demonstrate regularly using accepted current instrumentation for diagnosing equipment.\n, • Demonstrate ability for interpreting wiring diagrams and control schematics.\n, • Ability to utilize computers including the Microsoft Office Suite for compiling information for reports and history files and transfer digital pictures from camera to computer and enhance as required and label them for report purposes.\n, • Demonstrate an ability to interpret wiring diagrams, control schematics and plans and the ability as Subject Matter Expert (SME) to troubleshoot, analyze and provide distance support for listed equipment.\n, • Proficient with common productivity software.\n, • Paid Time Off (accrued), • Paid Holidays, • 401(k) with employer match and traditional/Roth options, • Medical Insurance (3 plan options) + TRICARE Supplemental Coverage, • Dental Insurance (2 plan options), • Vision Insurance Plan, • Healthcare and Dependent Care Flexible Spending Accounts, • Commuter/Transit Benefits, • Basic Life/AD&D, Short-Term and Long-Term Disability Insurance, • Supplemental Life Insurance, • Pet Benefits, • Legal Resources, • ID Theft Benefits, • Employee Assistant Plan and Work-Life Program, • Voluntary Leave Transfer Program, • Tuition Reimbursement Program Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran's Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation's most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at [email protected] or (571) 215-0077.

Title Quality Control Inspector About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Are you interested in joining the only national marine surface preparation painting contractor servicing every U.S. Port? If so, IMIA is the company for you. Don't miss this opportunity to become part of our dynamic team. Apply today. JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion.Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures. Location Florida Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications. Apply Now

Description Performs visual and electronic, electrical and mechanical inspection and testing of parts and products. Works to achieve minimum defect levels while improving overall quality and customer satisfaction levels. What you will be responsible for: • Observes and monitors production operations for functioning, operation, and accuracy to verify adherence to functional specifications., • Ensures compliance with ISO and assigned governmental and divisional quality policies, programs, plans, and procedures and applies them consistently and accurately., • Audits work policies, practices, processes, records and documentation for compliance and makes corrections as required. Ensures compliance with governmental regulations., • Executes changes in methods, sampling techniques and control procedures and processes to ensure maximum quality for cost., • Coordinates with other departments, including operations, engineering, HR, accounting and sales to implement approved programs., • Prepares accurate and timely preparation of error and/or salvage reports. Makes recommendations to minimize such errors., • Continually works to achieve short-term and long-term quality objectives, goals and measurements., • Performs such individual assignments as supervisors and superiors may direct; establishes and maintains effective work relationships within the department, the corporation, and the community., • Maintains the professional competence, knowledge and skills necessary for the satisfactory performance of all assigned responsibilities., • All other duties as assigned.\n Qualifications What you will need to be successful in this role: \n • High School Diploma or GED\n, • At least 3 years of related experience.\n, • Aerospace industry experience is strongly preferred\n, • ISO9001 experience is preferred\n, • Ability to perform internal audits\n, • This position requires compliance with International Traffic in Arms Regulations (ITAR). Candidates must be a U.S. Person as defined by ITAR (U.S. citizen, U.S. national, lawful permanent resident, or individual admitted as a refugee or granted asylum).\n\n The rewards of your career at AAR go far beyond just your salary: \n • Competitive salary \n, • Comprehensive benefits package including medical, dental, and vision coverage.\n, • 401(k) retirement plan with company match\n, • Generous paid time off program\n, • Professional development and career advancement opportunities\n\n Physical Demands/Work Environment: \n • The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n, • While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. \n, • The environmental characteristic for this position is an office setting. Candidates should be able to adapt to a traditional business environment.\n, • Must be able to lift and carry up to 30 pounds and comply with OSHA standards\n, • This position is an on-site role, and is not eligible to work hybrid or remote.\n, • The standard hours are Monday - Friday, 2:30 to 11:00 pm, but may be required to work additional hours as-needed.\n\n Please note: This is a proactive job posting to identify potential candidates because we expect to add a 2nd shift to this warehouse soon. There are no current vacancies, but we expect openings in the very near future. #LI-VR1 #LI-Onsite

Epsilon Systems is currently seeking a full time Rigger II in Mayport, Florida. Summary: This position includes the rigging of structures and equipment to and from shipboard locations and off-ship landing sites and/or conveyances safely without endangerment of personnel or equipment. Additionally, rigging equipment and structures between lay-down areas and industrial shop locations is required. Duties and Responsibilities: \n • Works in manufacturing and construction industries, where heavy machinery and materials are often used. As such, they work around heavy machinery outdoors and in industrial settings and report directly to a shift lead or manager\n, • Removes, places and repositions material and/or equipment using extensive knowledge of Below-the-Hook rigging gear throughout confined spaces and passageways through ships and building areas utilizing chain hoist and other rigging equipment.\n, • Makes load routing judgements accurately by considering size and locations of objects utilizing available overhead and surrounding structures and surface conditions.\n, • Judges and drifts objects/equipment utilizing multiple chain hoist and/or cranes to permit maneuvering loads around obstacles with proper sized rigging gear.\n, • rigs equipment but not limited to engine room work, pumps/motors, valves, electronic equipment, steel and flight deck safety net related work. Experienced in Load Testing of various pieces of equipment is also to be expected of this position.\n, • High diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard.\n, • Must be able to obtain Naval Base access (DBID's, background check)\n, • Must be able to calculate and understand units of measure\n, • Must be able to wear appropriate (PPE) Personal Protective Equipment\n, • Minimum 1 - 3 years' experience.\n, • Has knowledge of the trade qualifications Rigging and also performs as level I Outside Machinist.\n, • Must be able to understand and perform the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).\n, • Ability to use such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators\n, • Possesses the ability to accurately record readings and measurements as well as complete documentation, repair, and testing of equipment. Will assist in rigging evolutions when necessary.\n, • Communicates effectively\n, • Works independently or in a group.\n, • Possess basic knowledge of vessel compartments, number systems and related vessel compartments and who are safety-oriented and dedicated to doing their job as efficiently as possible are good fits for this role.\n, • Possess a Valid Divers License\n, • Ability to work overtime or night shifts depending on the amount of work needs.\n, • Ability to read, write, speak, and comprehend English.\n, • Ability to obtain access to military and government installations and private shipyards worldwide.\n, • Minimum 3+ years related rigging experience\n, • Involves heavy lifting up to 50 pounds, frequent stooping, bending, crawling, reaching and possible working assignments in overhead structures, confined spaces or beneath machinery either indoors or outdoors in noisy conditions.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

TOGETHER, WE SAVE LIVES OVERVIEW The candidate will be responsible for all the tasks related to the conceptual, preliminary, and final 3D design of small to medium, complex Plastic Injection Molds. The position requires a technical understanding of plastic part and mold design practices, injection molding process, and molding equipment. The successful candidate will be able to take 3D models of plastic parts and design a mold from start to finish including 3D models and dimensions/tolerance drawings. Additional experience with heating and cooling methods for molding equipment is also required. RESPONSIBILITIES \n • Design and 3D model of new injection molds producing high quality models and drawings\n, • Mold layout, cooling, ejection and detailed designs.\n, • Understanding and interpreting mold filling simulations and cooling analyses\n, • High School diploma required\n, • BS/MS in Mechanical Engineering, Plastics Engineering or related field, (preferred)\n, • 5+ years of designing plastic injection molds\n, • 5+ years 3D modeling experience required (SolidWorks or similar preferred)\n, • Broad knowledge of standard mold components\n At Safariland our colleagues are some of the best and brightest in the industry and we are seeking new team members who exhibit the diverse competencies that will drive The Safariland Group to even greater success while maintaining our culture of being a great place to work. We believe innovation drives winning performance and we constantly challenge ourselves to be the very best in every aspect of our business. We cultivate a work culture driven by our 4 core values; integrity, curiosity, excellence and empowerment and we want associates to be involved in their work and communities so they can achieve their highest level of wellbeing. That is why Safariland offers a comprehensive suite of benefits to promote health and financial security for eligible employees and their families. Eligible employees are offered: \n • Medical, dental & vision insurance\n, • 401(k) with company match\n, • Employer paid life insurance and AD&D\n, • Employer paid disability\n, • Wellness program\n, • Adoption assistance\n, • Tuition assistance\n, • Employee assistance program\n, • Work life balance\n For those applicants with disabilities, if you require reasonable accommodation in searching for a job opening or submitting an application, please contact us by calling 888-469-6455. All employment decisions are solely based on the applicant's qualifications as they relate to the requirements of the position.

Overview & Responsibilities To perform setups and machine a variety of components on a variety of machine tools. Able to perform work in a safe and timely manner to meet customer needs. Ability to work extremely close tolerances. Ability to layout and plan machining operations from prints, sketches or verbal instructions with limited supervision. The below reflects general details considered necessary to describe the principal functions of the job identified and shall not be construed as a detailed description of all of the work requirements that may be inherent in the job. Responsibilities: \n • Promotes safety and quality at all times.\n, • Maintain a clean and organized work area.\n, • Conducts him or herself in a professional manner at all times when working with internal and external customers.\n, • Advanced knowledge of machine equipment and machining operations of various machines: horizontal and vertical lathes, layout machines, vertical boring mills, horizontal mills, grinders, deburring tools, fixtures, radial and angular drill press, forklifts, cranes and various forms of rigging, jib hoists, personal computers, and other required tools necessary to perform the job.\n, • Advanced knowledge and accuracy in using various measuring devices: micrometers, indicators, calipers, gauges, and other required tools necessary to perform the job.\n, • Full understanding of use for tooling, drawings, work scopes, procedures, specifications and documentation to perform the primary function of the job.\n, • Performs most complex setups and machine tool operations. This includes turning, boring, facing, milling, drilling, reaming, tapping, sawing, slotting, grooving, grinding, and other required actions to complete the job.\n, • Ability to work to extremely close tolerances.\n, • Ability to read and comprehend drawings, sketches, job scopes, and verbal instructions.\n, • Maintains equipment by completing basic preventive maintenance requirements and notifying the appropriate representative for troubleshooting and repairs.\n, • Able to accurately measure and record all dimensional inspections as needed and pass annual dimensional inspection tests.\n, • Ability to complete layouts of most parts.\n, • Ability to train other employees in operation of equipment, reading prints, selection of tooling and machining equipment, along with repair processes.\n, • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.\n, • Documents actions by completing production and quality logs.\n, • Accepts ownership over work performance and stays abreast of job knowledge and new skill development.\n\n Qualifications: \n • High School Diploma or Equivalency\n, • Machining capabilities on manual lathes and mills\n, • Experiences with turbines, compressors and other rotating equipment is a plus\n\n Equal Employment Opportunity Ebara Elliott Energy is an equal employment opportunity/affirmative action employer and does not discriminate on the basis of race, color, religion, sex, national origin, age, marital status, genetic information, disability, veteran status, or any other characteristic protected by the federal, state or local laws of the United States. Applicants and employees are protected under U.S. federal law from discrimination. To learn more, click here. To learn more about our Job Applicant Privacy Notice, please click here. No agency submissions please. NOTE: Resumes submitted to any Ebara Elliott Energy employee without a current, signed and valid contract in place with the Ebara Elliott Energy recruiting team will become the property of Ebara Elliott Energy and no search fees will be paid.

Xylem is a Fortune 500 global water solutions company dedicated to advancing sustainable impact and empowering the people who make water work every day. As a leading water technology company with 23,000 employees operating in over 150 countries, Xylem is at the forefront of addressing the world's most critical water challenges. We invite passionate individuals to join our team, dedicated to exceeding customer expectations through innovative and sustainable solutions. Xylem is looking for a Diesel Field Service Technician to report to our Jacksonville, FL location and service our Diesel Pumps at various Xylem and Customer sites in the surrounding area. What your day will look like as a Diesel Field Service Technician The Diesel Field Service Technician will be responsible for the maintenance, troubleshooting, and repair of our diesel pumps and their corresponding electrical and mechanical components at various customer sites and Xylem Service Centers in the Jacksonville, FL area, as well as proving phone support when applicable. Equipment specific training will be provided, but applicants with previous experience working with diesel, mechanical, and electrical equipment are especially encouraged to apply. This position has general day shift hours with overtime opportunities and a compensated on-call rotation with occasional afternoons/weekends. Benefits for Diesel Field Service Technicians \n • Health, Dental, and Vision insurance available on your 1st day of employment\n, • Generous retirement saving plan\n, • Generous PTO package and paid holidays\n, • Career progression and development plans\n, • Company wellness, rewards and recognition, and employee discount programs\n\n Our Total Rewards Program goes far beyond base compensation by providing a more fulfilling work experience and offering a competitive benefits package. If you believe that we would be the right fit for you, please apply today. Position Requirements for Diesel Field Service Technicians \n • High school Diploma or GED\n, • Valid driver's license with good driving record- Class B CDL preferred\n, • Ability to pass a background check, drug screen, MVR check, and DOT physical\n, • Experience working with diesel systems, or a combination of education, training, and experience that demonstrates the ability to perform the duties of the position\n, • General diesel engine component location and identification\n, • Basic mechanical aptitude\n, • Ability to diagnose basic mechanical problems\n, • General DC electric and circuit testing skills\n, • Knowledge of and adherence to safety practices and procedures\n, • Ability to diagnose complex mechanical and electrical issues--preferred\n, • Ability to work independently with little or no supervision; self-motivated and self-directed\n, • Ability to communicate effectively with customers, co-workers and managers both verbally and in writing\n\n Job postings will include a wide salary range, with each role's pay falling within that range. Actual starting salary is based on factors such as skills, experience, location, and market conditions. #LI-AD1 Join the global Xylem team to be a part of innovative technology solutions transforming water usage, conservation, and re-use. Our products impact public utilities, industrial sectors, residential areas, and commercial buildings, with a commitment to providing smart metering, network technologies, and advanced analytics for water, electric, and gas utilities. Partner with us in creating a world where water challenges are met with ingenuity and dedication; where we recognize the power of inclusion and belonging in driving innovation and allowing us to compete more effectively around the world. At Xylem, you'll not only contribute to solving water issues but also have the chance to make a difference through our paid Volunteer Program, Xylem Watermark. We prioritize our employees' well-being through inclusion and belonging as well as our Employee Resource Groups (ERG). Proud to be an Equal Employment Opportunity (including disability and veterans) and Affirmative Action workplace, Xylem fosters an inclusive environment free from discrimination or harassment. Please note that the information in this job description outlines the general nature of the position and is not an exhaustive list of duties. Xylem is dedicated to providing reasonable accommodations to enable all employees to perform their essential job functions. We reserve the right to modify this job description and assign additional duties as needed. Embrace the opportunity to be part of Xylem's transformative journey in shaping the future of water technology! #XylemCareers #GlobalImpact #WaterInnovation

Epsilon Systems is currently seeking a full time Rigger III in Mayport, FL. Summary: This position includes the rigging of structures and equipment to and from shipboard locations and off-ship landing sites and/or conveyances safely without endangerment of personnel or equipment. Additionally, rigging equipment and structures between lay-down areas and industrial shop locations is required. Duties and Responsibilities: \n • Remove, place and reposition material and/or equipment throughout confined spaces and passageways through ships and building areas utilizing chain hoist and other rigging equipment.\n, • Makes load routing judgements by considering size and locations of objects utilizing available overhead and surrounding structures and surface conditions.\n, • Judges and drifts objects/equipment utilizing multiple chain hoist and/or cranes to permit maneuvering loads around obstacles with proper sized rigging gear.\n, • Operates forklift with extendable boom and straight mast.\n, • Understands and performs the basic set up, alignment, and operation of various portable tools and hand tools used in the trade.\n, • Uses such precision measuring instruments as height gauges, depth gauges, calipers, verniers, lay-out tools, tachometers, thermometers, vibration indicators\n, • Accurately record readings and measurements as well as complete documentation, repair, and testing of equipment. Will assist in rigging evolutions when necessary.\n, • High diploma/equivalent/Apprenticeship Diploma/additional vocational courses or technical school graduate; and/or military and/or civilian experience with marine mechanical systems in a repair department or shipyard.\n, • Must be able to maintain and obtain Naval Base access (DBID's, background check) and government installations and private shipyards worldwide.\n, • Must be able to calculate and understand units of measure\n, • Must be able to wear appropriate (PPE) Personal Protective Equipment\n, • Minimum 5 years' experience.\n, • Has knowledge of the trade qualifications Rigging and also performs as level I Outside Machinist.\n, • Has working knowledge of shipboard mechanical systems (repair/installation practices, procedures, alignments and troubleshooting).\n, • Communicates effectively\n, • Works independently or in a group.\n, • Possess basic knowledge of vessel compartments, number systems and related vessel compartments and who are safety-oriented and dedicated to doing their job as efficiently as possible are good fits for this role.\n, • Possess a Valid Divers License\n, • Ability to work overtime or night shifts depending on the amount of work needs.\n, • Ability to read, write, speak, and comprehend English.\n, • Experience in rigging of equipment but not limited to engine room work, pumps/motors, valves, electronic equipment, steel and flight deck safety net related work.\n, • Experienced in Load Testing of various pieces of equipment is also to be expected of this position.\n, • Minimum 5+ years related rigging experience\n, • Crane rigging, de-rigging and assembly is a plus\n, • Involves heavy lifting up to 50 pounds, frequent stooping, bending, crawling, reaching and possible working assignments in overhead structures, confined spaces or beneath machinery either indoors or outdoors in noisy conditions.\n Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Job Description Working with us takes a certain kind of person; we want someone who identifies with our values and is willing to challenge themselves both personally and professionally. We seek employees who are passionate about serving and making a difference in the lives of others. Make more than a Living, Make a Difference Our Full-Time Benefits • Low-Cost Medical, Dental and Vision Insurance, • 9 days of Vacation in the first year of service, • Minimum of 11 Paid Holidays, • Paid Sick Leave, • Retirement savings plan with employer match up to 5%, • Workers Compensation, • AD&D Insurance, • Public Service Loan Forgiveness (PSLF) Eligible Employer Service Contract Act (SCA) Position Hourly Range: $17.20 to $18.00 Duties and Responsibilities • The Cook I is responsible for preparing center meals, establishing menu, and determining quantities of food needed., • Plans and coordinates procedures necessary for day-to-day operations of center dining facility., • Efficient and timely arrangement, servicing, and clean-up of meals., • The Cook I maintains complete inventory file on food and equipment, ensures minimum waste through efficient storage, inventory, and food utilization., • Maintains strict safety and sanitation codes and procedures., • Submits weekly activity and other reports as assigned. Qualifications • High School diploma or equivalent., • Two or more years’ food preparation training and related work experience preferred., • Must possess or be able to obtain a ServSafe food safety certification., • Valid driver’s license with acceptable driving record preferred., • Required to pass a drug screen in compliance with our Substance Abuse and Drug-Free Workplace policy. *This job description is intended to describe the general nature and level of work being performed by a person assigned to this job. It is not to be construed as an exhaustive list of all job duties that may be performed by a person so classified. About our Program Job Corps is the largest nationwide residential career training program in the country and has been operating for more than 60 years. The program helps eligible young people ages 16 through 24 complete their high school education, trains them for meaningful careers, and assists them with obtaining employment. Eckerd Connects subsidiary of CLS Our Program Location Jacksonville Job Corps 4811 Payne StewartJacksonville, FL 32209 Connect with Us video: Please follow the link for more information about this program: Eckerd Connects employees and applicants for employment are covered by federal, state, and local laws designed to safeguard employees and job applicants from discrimination based on race, color, religion, sex, pregnancy, parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other status protected by applicable federal, state, or local laws. Eckerd Connects is committed to providing equal employment opportunities to all individuals, including individuals with disabilities. We comply with the Americans with Disabilities Act (ADA) and applicable state and local laws by providing reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Auxiliary aids and services are available upon request to individuals with disabilities. If you need assistance or accommodation due to a disability, please contact . Relay Services Dial 711. Know Your Rights: Workplace Discrimination is Illegal Copy & paste the link into your browser: Eckerd Connects is a drug-free workplace and utilizes E-Verify to confirm employment eligibility.

Job DescriptionYOUTH DEVELOPMENT PROFESSIONAL - HEALTH & WELLNESS (Long Branch Elementary School) This position is designed to develop young people’s capacity to engage in positive behaviors to nurture their well-being, set personal goals and grow into self-sufficient adults. The Health & Wellness Youth Development Professional is part of a team-oriented Club staff dedicated to serving our youth and creating an optimal Club Experience. This position will plan, supervise and implement a variety of high-yield activities and targeted programs within a health and life skills focus. This position is responsible for: ensuring youth development principles are incorporated into programs and activities; providing guidance and discipline to ensure a safe and positive environment for youth; ensuring the incorporation of character development, age appropriate and gender-specific programs and activities; ensuring that cultural diversity educational programs are implemented; assisting, as needed, in the planning, implementation, and delivery of educational activities and programs for youth ages 6 to 18. KEY ROLES (Essential Job Responsibilities): Prepare Youth for Success This position primary responsibilities are: • Planning and implementing a variety of health and life skills programs for members of all ages, including Cybersafety, Date SMART, Passport to Manhood, Be a Star, UPS Road Code, SMART Girls, SMART Moves, Street SMART & Triple Play: Healthy Habits, • Recruiting and retaining youth for the health and life skills programs, • Working with other staff in the club to help implement these programs throughout the school year, • Ensure programs, services and activities prepare youth for success, promoting safety of members, quality in programs and appearance of Club at all times. Provide guidance and role modeling to members., • Contribute to the planning and implementation of the strategic plan by:, • Planning and organizing a range of program services and activities for members, such as field trips, program specific activities, guest speakers, field trips, etc., • Initiating new programs with the approval of the Program Director/Unit Director., • Promoting and stimulating program participation., • Ensure quality improvement by monitoring and evaluating program achievement against target goals, recommending modifications that respond to member needs and interests and participating in weekly Club staff meetings., • Ensure a healthy and safe environment, supervising members in program area., • Maintain the cleanliness of program area., • Prepare weekly reports for the Program Director/Unit Director regarding activities, special programs, upcoming events, attendance, and other reports as required., • May participate in additional special programs and/or events., • Evenings/weekend work may be involved., • May be required to drive Club van., • (Requires valid driver’s license & three-year clean driving record) Internal: Maintains close, daily contact with club staff and volunteers, club members, and supervisor to receive/provide information, discuss issues, explain guidelines/instructions; instruct; and advise/counsel. Requirements Education High School diploma or GED Ability to pass DCF Level II background screening and drug test Experience • Knowledge of youth development, • Ability to motivate youth and manage behavior issues, • Ability to work with the public, • Ability to plan and implement quality programs specific to Health & Wellness This position generally works M – F, 2 - 3.5 hours between the hours of 8AM – 5PM, but may require longer hours outside of this schedule and occasional weekends when necessary. Work is conducted indoors and outdoors. PHYSICAL AND MENTAL REQUIREMENTS: • Ability to sit, stand and walk for long periods of time; bending and squatting on occasion, • Ability to lift to 20 lbs. on occasion, • Ability to hear at a normal conversational level, • Ability to maintain high energy level when necessary, • High degree of emotional intelligence The Boys and Girls Clubs of NE Florida is an Equal Employment Opportunity Employer and Drug Free Workplace. To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.

Requisition Number: 29402 When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Posting Job Summary: The Customer Experience Advocate I (CXA) interacts directly with potential, new and existing customers. They work to provide a quality experience in every step of the customer's journey, resulting in increased customer satisfaction and account retention for the company. Customer Experience Advocate I will serve customer inquiries, order processing, modifications to account information, and handling of customer complaints in a contact center environment. This role will follow up on customer cases utilizing our customer relationship management system to ensure customer inquiries and requests are handled completely and in timely manner. Key Characteristics: • Strong phone presence and interpersonal skills in making inbound and outbound customer calls while delivering a positive customer experience., • Must have strong and clear communication skills with an ability to use positive language and listen attentively., • Remains calm under pressure and works collaboratively with customers and internal team members to address and serve the customer's needs., • Works with high accuracy and manages time efficiently. Duties and Responsibilities: • Respond to and process all customer calls in a prompt and professional manner., • Determine the probable nature of each call by listening carefully, researching customer records and asking questions for clarification., • Communicate clearly and respectfully with callers, restating information when necessary to ensure the customer's understanding., • Acknowledge and resolve customer concerns; promptly escalate complaints when needed., • Process orders, forms, applications, requests, and payments accurately., • Keep records of customer interactions, transactions, comments and complaints by recording clear, complete and concise documentation in case management logs., • Attend and collaboratively participate in staff meetings and training sessions. Knowledge, Skills and Abilities: • Ability to work independently and within contact center teams., • Good problem-solving skills and asks for guidance when needed., • Good judgment and independent decision making within assigned authority levels., • Positive attitude and excellent interpersonal and listening skills; demonstrates effective customer care with all customers consistently and equally., • Effectively communicates in English - verbal and written., • Efficient and accurate use of systems and tools with a strong ability to multi-tasking. Education and Experience Required: • High School Diploma or Equivalent., • One to two years customer service experience; in a contact center preferred., • Demonstrated understanding of computer-based tools and programs. Working Conditions: • Work occurs inside a contact center - potential for 24/7/365 day operations in future., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The ability to use computer and telephone systems, visual, audio, and manual dexterity capabilities are essential to the work., • New hire training is 6 weeks with mandatory full attendance M-F 8am-5pm ET., • Call Center hours are Mon-Fri 7am-8pm ET and Saturday 8am-5pm ET, schedules may include evenings, weekends, and holidays. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis.

TOGETHER, WE SAVE LIVES OVERVIEW Inspect all corporate incoming materials which includes raw materials and buy to stock products. RESPONSIBILITIES \n • Collect data that reflect QMS performance (i.e., production first pass yield, supplier performance, etc.)\n, • Perform product sampling and document\n, • Initiate NCR\n, • Follow-up to all quality material and product issues related to the product line\n, • Assist in training of associates as required\n, • Other duties as assigned\n\n QUALIFICATIONS \n • Three (1) to four (3) years working in a quality control position\n, • Experience in working with applicable materials\n, • High School Diploma or GED equivalent\n, • Experience working with blueprints and drawings\n, • Experience with and knowledge of measurement tools (ruler, gages, protractors)\n, • Understanding of metric and imperial measurement systems\n, • Bi-lingual in Spanish/English preferred\n\n Why work at Safariland? At Safariland our colleagues are some of the best and brightest in the industry and we are seeking new team members who exhibit the diverse competencies that will drive The Safariland Group to even greater success while maintaining our culture of being a great place to work. We believe innovation drives winning performance and we constantly challenge ourselves to be the very best in every aspect of our business. We cultivate a work culture driven by our 4 core values; integrity, curiosity, excellence and empowerment and we want associates to be involved in their work and communities so they can achieve their highest level of wellbeing. That is why Safariland offers a comprehensive suite of benefits to promote health and financial security for eligible employees and their families. Eligible employees are offered: \n • Medical, dental & vision insurance\n, • 401(k) with company match\n, • Employer paid life insurance and AD&D\n, • Employer paid disability\n, • Wellness program\n, • Adoption assistance\n, • Tuition assistance\n, • Employee assistance program\n, • Work life balance\n For those applicants with disabilities, if you require reasonable accommodation in searching for a job opening or submitting an application, please contact us by calling 888-469-6455. All employment decisions are solely based on the applicant's qualifications as they relate to the requirements of the position.

Amentum, a global leader in critical mission support, engineering, technology, and national security solutions, is seeking a Quality Manager to support a government contract based in Jacksonville, Florida at Mayport. POSITION SUMMARY: • Implement and manage the Project QC program, ensuring all contractual obligations to the customer are complied with., • Key member of the site management team., • Shares responsibility and accountability for the overall operational success of the Contract., • Empowered to take appropriate action necessary to carry out the company's contractual obligations, in accordance with the Project Managers approval and authority., • Schedule quality inspections, collect quality data, analyze data, and submit Quality reports as specified by Contract & Company requirements., • Ensure all work is performed in accordance with the Quality Control Program to include sub-contractor performance., • Recommend updates/changes to the Quality Control Program to achieve improvements in quality, client relationships and customer service., • Maintain constant communication with the Government, Project Manager, Facilities Operations Manager, Supervisors & Leads - providing daily updates/status of on-going work., • Ensure all work meets or exceeds quality standards., • Ensure all Quality Control functions are performed in accordance with the accepted Quality Control Plan., • Conduct weekly scheduled inspections of the facility with the MBOS team to ensure contract requirements are met., • Ensure all required inspections are properly captured within Maximo., • Ensure all identified discrepancies are properly documented, forwarded to the correct person, and that follow up inspections are scheduled as required., • Develop trend analysis report to highlight areas of potential problems and/or needing extra emphasis by the Operations department., • On a monthly basis, brief Operations Management personnel on quality performance; including discrepancies, trends, improvement areas, etc., • Manage and provide daily guidance to Project QC staff., • Serve as the Project "Quality" point of contact for Government representatives., • Provide initial and on-going Quality Training to all Project personnel, Sub-Contractors and designated Customer representatives on aspects of the Project QC Program and Maximo relevant to their function & responsibilities., • Manage Contract deliverable reporting-Review all deliverables for accuracy and submitted to the government., • Perform all assigned work in a safe and reasonable manner that avoids preventable injury to you, co-workers, customers and/or members of the public., • Perform all assigned work in a safe and reasonable manner that avoids preventable damage to the company, customer, Government and/public property or equipment., • Immediately report unsafe conditions in your work area., • Immediately report all occupational injuries, and/or property damage to your supervisor or appropriate management representative., • Use and enforce the wearing of personal protective equipment., • Wear a seatbelt anytime you are operating or are a passenger in an assigned company, government vehicle or riding in a privately owned motor vehicle while performing assigned work activities/acting as an agent of the company., • High School Diploma or equivalent., • Five (5) years' experience in preparing and implementing Quality Management Systems (QMS) programs on contracts of similar size., • Knowledge of and ability to use Microsoft Office programs and Computerized Management Systems (Maximo)., • Knowledge of General Safety Requirements., • Detailed knowledge of Quality Control Principals and the ability to translate these principals into practical and specific Quality Control Plans., • Be able to collect, collate, analyze, and compare actual work performance data with the contract requirements and be able to determine and implement specific courses of action to rectify non-conforming work., • Have the ability to communicate satisfactorily both orally and in writing in the English Language., • Be able to constructively interact with associates, subordinates, support staff and senior management., • Ability to work independently and with minimal direct supervision., • Excellent time management skills and ability to multi-task and prioritize work., • Attention to detail and problem-solving skills., • Strong organizational and planning skills., • Ability to obtain & maintain a Security Clearance/Base Clearance Access., • Familiarity with government contracting procedures and principles is preferred., • Lean Six Sigma Green Belt Certified is preferred., • Instructional teaching experience is preferred., • OSHA 10 is preferred., • Knowledge of ISO certifications is preferred.\n OTHER RESPONSIBILTIES Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job. Compensation Details: $80,000 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. Benefits Overview: Our health and welfare benefits are designed to support you and your priorities. Offerings include: • Health, dental, and vision insurance, • Paid time off and holidays, • Retirement benefits (including 401(k) matching), • Educational reimbursement, • Parental leave, • Employee stock purchase plan, • Tax-saving options, • Disability and life insurance, • Pet insurance\n Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. Original Posting: 04/27/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is NO experience required, paid training is provided for all job openings. There are MANY different positions available. The job openings range in starting salary from $26.47 to $43.62/hour, $72,400/year average pay with full benefits. Benefits include medical and dental insurance, paid vacations, paid sick leave, 10 paid holidays, life insurance, and a retirement plan. Postal Service employment also includes career advancement, good working conditions, and GREAT job security. The Postal Service is the largest government related agency in terms of employees, currently employing nearly 1 million people. There are retail locations, mail distribution centers and Postal hubs within the Postal Service's operations. The Postal Service is currently hiring and there are MANY different positions available. The Postal Service has excellent and challenging employment opportunities. Postal Service employment includes great pay, good working conditions, career advancement, and job security that can lead to a lifetime career. To qualify for employment, you must be 18 years of age or older, have a high school diploma or a GED (NO college required) and be a U.S. citizen (or have a Green card). Postal Service operations are wide ranging from Mail Processing, handling and sorting mail to sales and marketing teams that work with commercial customers. Postal facilities process a large volume of mail. Mail Processor is one of the most important jobs of the Postal Service. Mail Processors sort mail and handle the mail, so that it can be moved to the next destination. There are specific individuals that are responsible for shipping and receiving mail. The Postal Service currently employs nearly 1 Million people. There are many employment opportunities with the Postal Service from entry level to management. Certain career fields exist in most or all of its departments. Fields such as Mail Processor, administrative, general office, accountant, administrative assistant, auditor, bookkeeper, office assistant, secretary, staff assistant, typist, etc. To allow a better understanding of the Postal Service Mail Processor position, the following is a brief description.

NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is NO experience required, paid training is provided for all job openings. There are MANY different positions available. The job openings range in starting salary from $26.47 to $43.62/hour, $72,400/year average pay with full benefits. Benefits include medical and dental insurance, paid vacations, paid sick leave, 10 paid holidays, life insurance, and a retirement plan. Postal Service employment also includes career advancement, good working conditions, and GREAT job security. The Postal Service is the largest government related agency in terms of employees, currently employing nearly 1 million people. There are retail locations, mail distribution centers and Postal hubs within the Postal Service's operations. The Postal Service is currently hiring and there are MANY different positions available. The Postal Service has excellent and challenging employment opportunities. Postal Service employment includes great pay, good working conditions, career advancement, and job security that can lead to a lifetime career. To qualify for employment, you must be 18 years of age or older, have a high school diploma or a GED (NO college required) and be a U.S. citizen (or have a Green card). Postal Service operations are wide ranging from Mail Processing, handling and sorting mail to sales and marketing teams that work with commercial customers. Postal facilities process a large volume of mail. Mail Processor is one of the most important jobs of the Postal Service. Mail Processors sort mail and handle the mail, so that it can be moved to the next destination. There are specific individuals that are responsible for shipping and receiving mail. The Postal Service currently employs nearly 1 Million people. There are many employment opportunities with the Postal Service from entry level to management. Certain career fields exist in most or all of its departments. Fields such as Mail Processor, administrative, general office, accountant, administrative assistant, auditor, bookkeeper, office assistant, secretary, staff assistant, typist, etc. To allow a better understanding of the Postal Service Mail Processor position, the following is a brief description.

NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is NO experience required, paid training is provided for all job openings. There are MANY different positions available. The job openings range in starting salary from $26.47 to $43.62/hour, $72,400/year average pay with full benefits. Benefits include medical and dental insurance, paid vacations, paid sick leave, 10 paid holidays, life insurance, and a retirement plan. Postal Service employment also includes career advancement, good working conditions, and GREAT job security. The Postal Service is the largest government related agency in terms of employees, currently employing nearly 1 million people. There are retail locations, mail distribution centers and Postal hubs within the Postal Service's operations. The Postal Service is currently hiring and there are MANY different positions available. The Postal Service has excellent and challenging employment opportunities. Postal Service employment includes great pay, good working conditions, career advancement, and job security that can lead to a lifetime career. To qualify for employment, you must be 18 years of age or older, have a high school diploma or a GED (NO college required) and be a U.S. citizen (or have a Green card). Postal Service operations are wide ranging from Mail Processing, handling and sorting mail to sales and marketing teams that work with commercial customers. Postal facilities process a large volume of mail. Mail Processor is one of the most important jobs of the Postal Service. Mail Processors sort mail and handle the mail, so that it can be moved to the next destination. There are specific individuals that are responsible for shipping and receiving mail. The Postal Service currently employs nearly 1 Million people. There are many employment opportunities with the Postal Service from entry level to management. Certain career fields exist in most or all of its departments. Fields such as Mail Processor, administrative, general office, accountant, administrative assistant, auditor, bookkeeper, office assistant, secretary, staff assistant, typist, etc. To allow a better understanding of the Postal Service Mail Processor position, the following is a brief description.

NO EXPERIENCE REQUIRED – PAID TRAINING PROVIDED – JOB SECURITY The Postal Service is the largest government related agency in terms of employees. The Postal Service currently employs nearly 1 million people and is hiring nationwide. There is NO experience required, paid training is provided for all job openings. There are MANY different positions available. The job openings range in starting salary from $26.47 to $43.62/hour, $72,400/year average pay with full benefits. Benefits include medical and dental insurance, paid vacations, paid sick leave, 10 paid holidays, life insurance, and a retirement plan. Postal Service employment also includes career advancement, good working conditions, and GREAT job security. The Postal Service is the largest government related agency in terms of employees, currently employing nearly 1 million people. There are retail locations, mail distribution centers and Postal hubs within the Postal Service's operations. The Postal Service is currently hiring and there are MANY different positions available. The Postal Service has excellent and challenging employment opportunities. Postal Service employment includes great pay, good working conditions, career advancement, and job security that can lead to a lifetime career. To qualify for employment, you must be 18 years of age or older, have a high school diploma or a GED (NO college required) and be a U.S. citizen (or have a Green card). Postal Service operations are wide ranging from Mail Processing, handling and sorting mail to sales and marketing teams that work with commercial customers. Postal facilities process a large volume of mail. Mail Processor is one of the most important jobs of the Postal Service. Mail Processors sort mail and handle the mail, so that it can be moved to the next destination. There are specific individuals that are responsible for shipping and receiving mail. The Postal Service currently employs nearly 1 Million people. There are many employment opportunities with the Postal Service from entry level to management. Certain career fields exist in most or all of its departments. Fields such as Mail Processor, administrative, general office, accountant, administrative assistant, auditor, bookkeeper, office assistant, secretary, staff assistant, typist, etc. To allow a better understanding of the Postal Service Mail Processor position, the following is a brief description.

JOB TITLE SUPERINTENDENT I LOCATION FLORIDA - JACKSONVILLE, FL 32206 US (Primary) JOB TYPE Full-Time JOB CLASSIFICATION Salaried EXEMPTION TYPE Exempt EDUCATION High School Diploma/GED JOB DESCRIPTION JOB SUMMARY: Reporting to Project Managers while on assigned projects, directs and coordinates production efforts through assigned supervisory personnel and subcontractors. With the guidance of the Project Manager, helps establish aggressive production schedules and budgets, and ensures that plans, goals, and requirements are being met. Achieves goals by collaborating with team members to establish plans for successful execution of work. The Superintendent 1 is an entry level Superintendent position. The scope of responsibility for this entry level Superintendent position is commensurate with that of smaller, less complex projects. With progressive training, development, and experience, the Superintendent 1 can be entrusted with projects of increasing size and complexity. JOB REQUIREMENTS Essential Functions: • Coordinates with craft Foreman to ensure that material, tooling, information, manpower, and equipment is available to support schedule and project requirements., • Coordinates with supervision and subcontractors to obtain optimum production, by establishing priorities and coordinating efforts between trades., • Assists the Project Manager and collaborates with assigned project QA personnel to ensure that all required reports are submitted by trade supervisors., • Ensures that no additional work is performed outside of what is designated in contract specifications, and effectively interprets specification ambiguities., • Recognizes and addresses change work and helps articulate appropriate arguments for condition found reports., • Consults with trade supervision and customers to assess technical conflicts and provides recommendations for resolution., • Promotes a strong culture of Safety in their engagement with Production teams., • Performs other duties as assigned. QUALIFICATIONS: • Willingness to work a flexible schedule., • Ability to work with minimal direction., • Ability to independently determine methods and procedures on new assignments., • Ability to provide guidance to others., • Ability to determine appropriate actions, methods, techniques, and evaluation criteria for expediting results by exercising independent judgment within defined practices and policies., • Ability to follow an organized method in approach to work while being cognizant of the time needed to provide a service or product., • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public., • Strong communication skills, including oral, written and interpersonal skills to effectively communicate with subordinates, management, and customers., • Ability to work with mathematical concepts such as probability, statistical inference, and fundamentals of plane and solid geometry and trigonometry., • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations., • Ability to read and interpret blueprints., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Must have Microsoft Office Software experience, and knowledge of Microsoft Project is a plus., • Bachelor's degree in Marine Engineering, Naval Architecture, or other engineering fields preferred., • Three to five years related marine, shipyard or industrial experience and/or training; or equivalent combination of education and experience., • Must be authorized to work in the United States., • Must be able to gain access to military installations., • Must successfully pass a drug screen and background investigation. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must be able to tour all vessels, piers, docks, and work sites to perform the duties of this job. The employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; talk or hear; climb or balance, stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision depth perception and ability to adjust focus. (Ability to view computer monitors without eye strain for extended periods of time). Environmental Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; high, precarious places; and outside weather conditions. Hearing protection will be required in many work areas. Safety: Must comply with the Companies safety, environmental, and OSHA standards. EOE/M/F/Disability/Vet

APG is a leading EPC (Engineering, Procurement, and Construction) contractor specializing in complex, high-value electrical infrastructure projects, including high-voltage substations, utility-scale and commercial solar installations, microgrids, battery energy storage systems (BESS), and other advanced electrical solutions for data centers, industrial facilities, and commercial clients. We deliver turnkey solutions that power the future with reliability, efficiency, and innovation. The role requires full-time nationwide travel with a structured 3 weeks on and 1 week at home travel schedule. Candidates must be prepared to travel to project sites across the U.S. The Construction Manager oversees several concurrent mid-sized energy retrofit construction projects throughout the US. The ideal candidate will have 5-7 years total professional experience that includes a wide range of experience in field operations and construction means and methods. The candidate will have a high school diploma or equivalent certificate. The ideal candidate will also demonstrate success in the following skills and abilities: • Manage multiple concurrent energy construction projects across the U.S., • Provide valuable cost and constructability input during the design phase., • Coordinate submittal, schedules, subcontractors and field activities., • Lead construction meetings with subcontractors, APG teams, and clients., • Develop and maintain detailed project schedules (including 3-week lookahead)., • Ensure strict adherence to construction specifications QA/QC, and safety standards., • Oversee project closeout documentation, and as-bult drawings., • Capture and manage field redlines and ensure accurate project documentation., • Maintain construction management software per company standards., • Build and maintain strong client relationships and ensure project success., • Valid Driver's License and ability to travel extensively nationwide., • 5-7 years of construction management experience with strong field operations background., • Experience with data center substations, microgrids, and Battery Energy Storage Systems (BESS) is required., • Strong knowledge of the construction means, methods, and energy infrastructure projects., • Proven ability to manage schedules, budgets, and quality simultaneously., • Ability to lead teams, subcontractors, and client interactions effectively., • Excellent communication, organizational, and problem-solving skills., • Capable of leading confidently in identifying, correcting and/or avoiding potential schedule, budget or quality issues. The ability to make decisions, while balancing cost implications, to avoid disruptions in the work or customers' operations is required., • Be able to apply innovative and effective management techniques to maximize employee and Subcontractor performance., • Relies on experience and judgment to plan and accomplish project's goals. A wide degree of creativity and latitude is expected., • Thorough understanding of Company and industry practices, policies, and standards., • Desire and capability to lead others in the construction process., • Effectively engage clients in the construction process. Respond to client concerns in an effective and timely manner., • Possess excellent organizational skills. Capable of maintaining project documentation and working on multiple activities/projects at one time., • Possess excellent verbal and written communication skills., • Ability to lift up to 50lbs and climb ladders as needed., • OSHA 30 Certification, • Experience reviewing and implementing construction specifications and drawings., • AutoCAD experience (drafting and redlining) is a strong plus., • Familiarity with ESCO design and commissioning processes. Alternative Power Generation, Inc. participates in E-Verify.

Are you outgoing, well-spoken, and energized by connecting with people? Do you enjoy being outdoors and engaging with your local community? Then, we should talk! At Renewal by Andersen, we deliver a signature service experience unlike any other in the home improvement industry. As a premium window and door replacement company, we recognize that our Residential Canvassers are more than representatives; they are the face of our company and help create memorable first impressions for every homeowner they greet. If you're looking for a career that's rewarding, fun, and full of real growth potential, then click 'Apply Now' to join our elite team! What We Offer: • A Culture People Love - proudly recognized as a Top 10 Best Place to Work for 4yrs in a row, • Time to Recharge - enjoy paid time off plus six paid holidays to support your work-life balance, • Health & Peace of Mind - medical, dental, vision, and life insurance to support your wellbeing, • Join a Company Where Growth is Real - over 60% of our leaders were promoted from within, • Paid Training - comprehensive training with a supportive team committed to your success, • Income (On Average): $25hr - $40hr (Base + Weekly Performance Bonus!) (Paid Weekly!), • Schedule: Flexible Availability - Weekdays/Weekends (Full-Time) Responsibilities: • Generate high-quality leads while engaging in door-to-door campaigning in assigned territories, • Learn and confidently deliver a pre-qualifying lead presentation to prospective homeowners, • Achieve daily and weekly goals while representing the company professionally and positively, • Provide daily reports on leads and appointments, and attend team meetings Requirements: • High School Diploma or Equivalent - (Minimum 18yrs of Age), • At least 1-2yrs of Customer Service Experience, • Previous Door-to-Door Sales, Appointment Setting, or Retail Experience is a Plus, • Reliable Transportation for Commuting to Various Locations in the Area, • Availability to Work Flexible Schedule - Including Weekends if Needed, • Ability to learn and then utilize selling techniques, • Comfortable walking throughout neighborhoods, • Interpersonal communication, social intelligence, charismatic personality, and people skills Must be willing to undergo a criminal background check Must have a valid driver's license and clean driving record This Company Participates in E-Verify Our Company Culture is one that strives "to provide an exceptional employee experience that leads the way to delighted customers. We encourage our employees to achieve their personal and professional goals. Our continuous success is the result of our inclusive, collaborative, and positive environment". Renewal by Andersen careers offers unrivaled opportunity! Our employees bring to life our key core values: integrity, alignment, achievement, balance, and commitment. If these values are also important to you, we want you on our team! We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

This position is essential to the success of our retail stores. Customer Service Specialists work closely with wholesale and retail customers to determine their needs, answer their questions about Sherwin-Williams products, and recommend the right solutions. Customer Service Specialists are also expected to promptly resolve any customer concerns and ensure maximum client satisfaction as well as stay up-to-date with product features and maintain the high quality and visual standards of the products and store. Customer Service Specialists are tasked with achieving excellent customer service, while consistently meeting the store's sales goals. Job duties involve contact with customers, which may include minors; and access to cash and other payment methods, electronic equipment, personal information, store merchandise and other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company's customers, staff, employees, vendors, contractors, and the general public. • Ensure high levels of customer satisfaction through excellent sales service, • Assist customers in person and over the phone by determining needs and presenting appropriate products and services, • Build productive trust relationships with wholesale and retail customers, • Process sales transactions accurately and consistently with policies and procedures, • Follow and achieve sales goals on a monthly, quarterly, and yearly basis, • Maintain precise work order files and formulas, • Pull appropriate products from the sales floor or warehouse, • Tint and mix products, as needed, to customer specifications, • Stock shelves and set up displays, • Clean store equipment, • Load/unload delivery trucks, • Assist in making deliveries, as needed, • Maintain in-stock and presentable condition assigned areas, • Remain knowledgeable on products offered and discuss available options, • Comply with inventory control procedures, • Suggest ways to improve sales Minimum Requirements:, • Must be at least eighteen (18) years of age, • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future, • Must have a valid, unrestricted Driver's License, • Must be able, with or without reasonable accommodation, to retrieve material from shelves and floor stacks and lift and carry up to 50 lbs. frequently and up to 70 lbs. on occasion, • Must be willing to work all scheduled hours, which may include evenings and weekends, with or without reasonable accommodationPreferred Qualifications:, • Have at least a High School diploma or GED, • Have at least one (1) year of experience working in a delivery, retail, or customer service position, • Have previous work experience selling paint and paint-related products, • Have previous work experience operating tinting and mixing equipment, • Ability to read, write, comprehend, and communicate in more than one language, • Ability to read, write, comprehend, and communicate in Spanish #SHWSales

Location(s): Jacksonville, FL, US, 32206 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68859 SUMMARY Functions as the primary dedicated trainer for all hourly operators in the facility focusing on training for new hires and upskilling existing employees. Principal Duties and Responsibilities • Promote our Safer Together culture, encouraging safety event reporting and assist Plant Safety team in safety investigations and root-case analysis as needed, • Train new hires entering the facility, • Upskill and cross-train existing Plant workforce, including Operations Specialists and Shift Supervisors, • Partner with the Training & Development Coordinator and Training & Development Pillar Leader to track and report on the effectiveness of training programs, adjusting as necessary to improve outcomes, • Facilitate On-the-Job Training (OJT) Plus program for Area Trainers, equipping them with the necessary skills and knowledge to train team members effectively., • Regularly evaluate Area Trainers to ensure they are consistently applying the OJT 4 Step Method and maintaining training standards, • Provide constructive and real-time feedback on training process and materials, needs and gaps, • Collaborate with Training and Development Coordinator, providing regular updates on new hire progress, • Lead the qualification process, ensuring training milestones are being met, • Partner with Operations Leadership to plan and execute skills assessments, utilizing an established certification process to ensure competency and identify areas for improvement, • Write new and/or edits existing Standard Operating Procedures (SOPs), One-Point Lessons (OPLs) and other training materials, • Teach in both hands-on/on-the-job settings (ex: equipment functionality, troubleshooting and upset condition response) and classroom style settings (ex. new hire orientation), • Assist employees in understanding the importance of TPM and their role in driving TPM progress at the plant, • Attend daily meetings and planning sessions, • Participate as a member of the T&D Pillar, • Coordinate with Operations Leadership and Training and Development Coordinator on new hire schedules and management, • Oversee trending needs analysis, • Other responsibilities and tasks as assigned by a Leader, Supervisor, NLT SKILLS AND ABILITIES • Strong safety presence, on and off the line, • Skilled in training facilitation and committed to developing adult learning methodology. Will become certified through the Roofing Train the Trainer program, • Self-starter mindset, • Ability to work well with others with diverse backgrounds and at various organizational levels, • Can demonstrate process and standard operating procedures, • Understands 5S, • Team player with strong verbal and written communication skills, • Understanding of TPM theory, • Basic mathematical skills, • Strong organizational and multitasking abilities, • Flexibility to work nights, weekends and off-shifts as needed COMPUTER AND SOFTWARE COMPENTENCIES • Proficient in MS Outlook, Excel and PowerPoint, • Timely and professional email communication EDUCATION AND/OR EXPERIENCE • High School Diploma or Equivalent required, Bachelor's preferred, • 2 or more years Training and development experience in a manufacturing setting preferred. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT • Ability to routinely lift up to 40 lbs without assistance, • Ability to routinely lift up to 80 lbs with assistance, • Ability to work for 12 hours in extreme hot/cold manufacturing environment if needed, • Walk/stand continuously for up to 12 hours, • Willingness to travel 10% of the time, • Ability to safely bend, twist, and squat, • Routinely ascend and descend stairs and ladders as work area requires, • Adapt to rotating shift work if needed for training purposes, • Pass pre-employment drug screening, background check, and health screen This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18. Nearest Major Market: Jacksonville

Lawn Specialist 5605 Florida Mining Blvd, Jacksonville, Florida 32257 TruGreen accepts applications on an ongoing basis. Job Description At TruGreen, we believe every lawn holds potential and so does every team member. As a Residential Lawn Care Specialist, you'll be both a skilled technician and a turf whisperer, breathing life into lawns while earning the trust of homeowners who take pride in their outdoor spaces. You'll deliver expert treatments backed by TruGreen's proven methods, offering personalized care that produces lush, healthy lawns. With hands-on service and a customer-first mindset, you'll make a visible difference, building pride in every yard and progress in your career. What You'll Do * Apply fertilizers and weed control treatments safely and precisely * Diagnose lawn concerns and offer expert solutions during customer visits and calls * Measure properties and provide quotes for TruGreen services * Maintain accurate records of treatments, customer instructions, and service notes * Drive to customer homes in a company vehicle and represent TruGreen with pride * Clean and inspect vehicles and equipment daily to keep operations smooth and safe * Upsell services to current customers through on-route interactions and calls * Contribute to facility upkeep as part of our team-oriented culture What You'll Bring * High school diploma or GED * Experience in horticulture, landscaping, customer service, or related fields preferred * Valid driver's license and clean driving record * Must be able to obtain a DOT medical card * Ability to read work instructions and complete documentation clearly and accurately * Basic math skills for property measurements and product calculations * Strong communication skills and attention to detail * Reliable time management and commitment to punctuality The Perks * Paid training and ongoing development * Health, dental, and vision benefits * 401(k) with company match * Competitive wages • Average income is $850 - $1,200/week (based on an hourly rate and average bonuses earned for qualifying specialists meeting performance expectations) Career advancement opportunities * Supportive team culture * Work outdoors, stay active, and make an impact you can see Physical Requirements * Lift up to 50 lbs and operate equipment * Work in varying weather and outdoor conditions * Move safely on uneven terrain and stairs * Interact with customers and apply treatments using proper PPE If you're ready to grow your career while helping others grow great lawns, TruGreen is ready for you. Apply today and become a local lawn legend. Ability to speak, read and write fluently in English is required. You MUST BE physically located in the United States while performing this job. TruGreen is proud to affirm our commitment to hiring veterans. We recognize and appreciate the exceptional skills, dedication, and leadership that veterans bring to the workforce. By fostering an inclusive and diverse environment, we aim to leverage the unique experiences of veterans, creating a richer, more dynamic workplace. $27,669.00 - $58,865.00 This range is based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, and geographic location, the expected quality and quantity of work, and internal pay alignment, as needed. Most candidates will start in the bottom half of the pay range. The upper end of the range will generally be reserved for candidates with extensive experience. An employee's pay history will not be a contributing factor where prohibited by local law. In addition to monetary compensation, we offer benefits, including Medical/Dental/Vision insurance and Company-matching 401(k) in addition to other programs and perks. TruGreen is committed to Diversity and Inclusion. We encourage diverse candidates to apply to this position. We are an Equal Opportunity/Affirmative Action Employer - Minorities/Females/Protected Veterans/Individuals with Disabilities. To learn more, please visit EEOC/EEO | TruGreen (trugreenjobs.com California Residents: When you express interest in or apply for a job with TruGreen Limited Partnership, we collect personal information about you, potentially including personal identifiers, contact information, protected classifications, pre-hire information, professional or employment-related information, education history, and/or medical information, for the following business purposes: to comply with state and federal law and regulations requiring employers to maintain certain records; to evaluate your job application and candidacy for employment; and to obtain and verify background checks (including criminal and motor vehicle records), pre-employment drug testing, and references. Massachusetts Residents: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. TruGreen performs pre-employment testing. To view our disclaimer,

Position Qualifications: High school diploma or equivalency required / Bachelor's degree preferred Minimum one year of warehouse retail or customer service experience required Must have strong customer service and effective communication skills. Retail Warehouse Associates/Retail Stocker Now Hiri

Your future role at a glance Location: Jacksonville, FL Facility: Ascension St. Vincent's Riverside Hospital Schedule: Nights | Full-time Life at Ascension: Where purpose meets opportunity Ascension is a leading nonprofit Catholic health system with a culture and associate experience grounded in service, growth, care and connection. We empower our 99,000+ associates to bring their skills and expertise every day to reimagining healthcare, together. Recognized as one of the Best 150+ Places to Work in Healthcare and a Military-Friendly Gold Employer, you'll find an inclusive and supportive environment where your contributions truly matter. Benefits that help you thrive * Comprehensive health coverage: medical, dental, vision, prescription coverage and HSA/FSA options * Financial security & retirement: employer-matched 403(b), planning and hardship resources, disability and life insurance * Time to recharge: pro-rated paid time off (PTO) and holidays * Career growth: Ascension-paid tuition (Vocare), reimbursement, ongoing professional development and online learning * Emotional well-being: Employee Assistance Program counseling and peer support, spiritual care and stress management resources * Family support: parental leave, adoption assistance and family benefits * Other benefits: optional legal and pet insurance, transportation savings and more Benefit options and eligibility vary by position, scheduled hours and location. Benefits are subject to change at any time. Your recruiter will provide the most up-to-date details during the hiring process. How you'll make an impact in this role • Deliver high-quality, patient-centered care by following established clinical standards and evidence-based protocols., • Drive the implementation of patient care plans, proactively monitoring status and documenting progress to ensure optimal outcomes., • Act as the primary coordinator for multidisciplinary teams, facilitating seamless communication and well-integrated treatment., • Execute physician and nursing orders with precision, serving as a critical link in the clinical decision-making process., • Lead the discharge planning process in collaboration with the healthcare team to ensure a safe and successful transition for every patient. What minimum requirements you'll need Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted. Equal employment opportunity employer Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. Fraud prevention notice Prospective applicants should be vigilant against fraudulent job offers and interview requests. Scammers may use sophisticated tactics to impersonate Ascension employees. To ensure your safety, please remember: Ascension will never ask for payment or to provide banking or financial information as part of the job application or hiring process. Our legitimate email communications will always come from an @ascension.org email address; do not trust other domains, and an official offer will only be extended to candidates who have completed a job application through our authorized applicant tracking system. E-Verify statement Employer participates in the Electronic Employment Verification Program. Please click ___ for more information.

Overview: PRN Position 6:45am - 3:15pm Assist the surgeon(s) by providing basic instrumentation and sterile techniques for procedures performed in the Operating Room and provide patient care in the clinical setting. The Surgical Tech II is also responsible for the care, handling and maintenance of basic surgical equipment and instrumentation. Qualifications: Required Education: High School Diploma or GED. Specific course work: Graduate of surgical technologist program Preferred Education: Associate's degree Required Licensure/Certifications: -Surgical Tech Certification from NCCT, NBSTSA, or LCCC-ST -BLS from the American Heart Association or American Red Cross Preferred Licensure/Certifications: N/A Required Experience: Minimum of 6 months surgical technologist experience Preferred Experience: 3-5 years of working experience as a surgical technologist and assistant in a specialty line (Cardiology, Neurology, or Orthopedics) Necessary Skills: 1. Strong working knowledge of patient care and basic human needs throughout the life span, 2. Strong working knowledge of anatomic structure and human body system, 3. Strong working knowledge of acute and chronic disease processes, 4. In depth knowledge of medical terminology, 5. Must have excellent verbal and written English communication skills, including but not limited to presentation skills and report writing, 6. Must have expert knowledge, use and demonstration of standard precautions; Expert knowledge, use and experience with aseptic and sterile technique, 7. Must have experience training and precepting staff in Cardio-Thoracic surgery, 8. Must have organization and time management skills including but not limited to organizing, planning and prioritizing work. Age of Patients Served: All Age Groups

Overview: PRN Position 6:45am - 3:15pm Assist the surgeon(s) by providing basic instrumentation and sterile techniques for procedures performed in the Operating Room and provide patient care in the clinical setting. The Surgical Tech II is also responsible for the care, handling and maintenance of basic surgical equipment and instrumentation. Qualifications: Required Education: High School Diploma or GED. Specific course work: Graduate of surgical technologist program Preferred Education: Associate's degree Required Licensure/Certifications: -Surgical Tech Certification from NCCT, NBSTSA, or LCCC-ST -BLS from the American Heart Association or American Red Cross Preferred Licensure/Certifications: N/A Required Experience: Minimum of 6 months surgical technologist experience Preferred Experience: 3-5 years of working experience as a surgical technologist and assistant in a specialty line (Cardiology, Neurology, or Orthopedics) Necessary Skills: 1. Strong working knowledge of patient care and basic human needs throughout the life span, 2. Strong working knowledge of anatomic structure and human body system, 3. Strong working knowledge of acute and chronic disease processes, 4. In depth knowledge of medical terminology, 5. Must have excellent verbal and written English communication skills, including but not limited to presentation skills and report writing, 6. Must have expert knowledge, use and demonstration of standard precautions; Expert knowledge, use and experience with aseptic and sterile technique, 7. Must have experience training and precepting staff in Cardio-Thoracic surgery, 8. Must have organization and time management skills including but not limited to organizing, planning and prioritizing work. Age of Patients Served: All Age Groups

Responsibilities Wekiva Springs Center of Jacksonville Florida has an immediate opening for a Full Time housekeeping position. This is position is from 8a-4:30p, with alternating weekends. We Offer; • Competitive pay, • Excellent PTO Package, • Insurance to meet your needs, • Tuition reimbursement after 1 year, • 401K with up to 4% match The Housekeeper cleans, picks up trash, stocks linen closet and disinfects daily in patient and public areas. Ensures a safe and risk preventative environment within Corporate and OSHA regulations. High school diploma or general education degree (GED) required along with 6 months experience in a commercial environment. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions. While performing the duties of this job, the employee is regularly required to stand, walk, and site; use hands to finger, handle, or feel, reach with hands and arms, stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds, and occasionally up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Qualifications One of the nation's largest and most respected providers of hospital and healthcare services, Universal Health Services, Inc. (NYSE: UHS) has built an impressive record of achievement and performance. Growing steadily since its inception into an esteemed Fortune 300 corporation, annual revenues were $15.8 billion in 2024. During the year, UHS was again recognized as one of the World's Most Admired Companies by Fortune; and listed in Forbes ranking of America's Largest Public Companies. Headquartered in King of Prussia, PA, UHS has approximately 99,000 employees and continues to grow through its subsidiaries. Operating acute care hospitals, behavioral health facilities, outpatient facilities and ambulatory care access points, an insurance offering, a physician network and various related services located all over the U.S. States, Washington, D.C., Puerto Rico and the United Kingdom. EEO Statement All UHS subsidiaries are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. UHS subsidiaries are equal opportunity employers and as such, openly support and fully commit to recruitment, selection, placement, promotion and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state or local laws. We believe that diversity and inclusion among our teammates is critical to our success. Notice At UHS and all our subsidiaries, our Human Resources departments and recruiters are here to help prospective candidates by matching skillset and experience with the best possible career path at UHS and our subsidiaries. We take pride in creating a highly efficient and best in class candidate experience. During the recruitment process, no recruiter or employee will request financial or personal information (Social Security Number, credit card or bank information, etc.) from you via email. The recruiters will not email you from a public webmail client like Hotmail, Gmail, Yahoo Mail, etc. If you are suspicious of a job posting or job-related email mentioning UHS or its subsidiaries, let us know by contacting us at: or 1-800-852-3449.

Overview: PRN Position 6:45am - 3:15pm Assist the surgeon(s) by providing basic instrumentation and sterile techniques for procedures performed in the Operating Room and provide patient care in the clinical setting. The Surgical Tech II is also responsible for the care, handling and maintenance of basic surgical equipment and instrumentation. Qualifications: Required Education: High School Diploma or GED. Specific course work: Graduate of surgical technologist program Preferred Education: Associate's degree Required Licensure/Certifications: -Surgical Tech Certification from NCCT, NBSTSA, or LCCC-ST -BLS from the American Heart Association or American Red Cross Preferred Licensure/Certifications: N/A Required Experience: Minimum of 6 months surgical technologist experience Preferred Experience: 3-5 years of working experience as a surgical technologist and assistant in a specialty line (Cardiology, Neurology, or Orthopedics) Necessary Skills: 1. Strong working knowledge of patient care and basic human needs throughout the life span, 2. Strong working knowledge of anatomic structure and human body system, 3. Strong working knowledge of acute and chronic disease processes, 4. In depth knowledge of medical terminology, 5. Must have excellent verbal and written English communication skills, including but not limited to presentation skills and report writing, 6. Must have expert knowledge, use and demonstration of standard precautions; Expert knowledge, use and experience with aseptic and sterile technique, 7. Must have experience training and precepting staff in Cardio-Thoracic surgery, 8. Must have organization and time management skills including but not limited to organizing, planning and prioritizing work. Age of Patients Served: All Age Groups

Overview: PRN Position 6:45am - 3:15pm Assist the surgeon(s) by providing basic instrumentation and sterile techniques for procedures performed in the Operating Room and provide patient care in the clinical setting. The Surgical Tech II is also responsible for the care, handling and maintenance of basic surgical equipment and instrumentation. Qualifications: Required Education: High School Diploma or GED. Specific course work: Graduate of surgical technologist program Preferred Education: Associate's degree Required Licensure/Certifications: -Surgical Tech Certification from NCCT, NBSTSA, or LCCC-ST -BLS from the American Heart Association or American Red Cross Preferred Licensure/Certifications: N/A Required Experience: Minimum of 6 months surgical technologist experience Preferred Experience: 3-5 years of working experience as a surgical technologist and assistant in a specialty line (Cardiology, Neurology, or Orthopedics) Necessary Skills: 1. Strong working knowledge of patient care and basic human needs throughout the life span, 2. Strong working knowledge of anatomic structure and human body system, 3. Strong working knowledge of acute and chronic disease processes, 4. In depth knowledge of medical terminology, 5. Must have excellent verbal and written English communication skills, including but not limited to presentation skills and report writing, 6. Must have expert knowledge, use and demonstration of standard precautions; Expert knowledge, use and experience with aseptic and sterile technique, 7. Must have experience training and precepting staff in Cardio-Thoracic surgery, 8. Must have organization and time management skills including but not limited to organizing, planning and prioritizing work. Age of Patients Served: All Age Groups

Overview: PRN Position 6:45am - 3:15pm Assist the surgeon(s) by providing basic instrumentation and sterile techniques for procedures performed in the Operating Room and provide patient care in the clinical setting. The Surgical Tech II is also responsible for the care, handling and maintenance of basic surgical equipment and instrumentation. Qualifications: Required Education: High School Diploma or GED. Specific course work: Graduate of surgical technologist program Preferred Education: Associate's degree Required Licensure/Certifications: -Surgical Tech Certification from NCCT, NBSTSA, or LCCC-ST -BLS from the American Heart Association or American Red Cross Preferred Licensure/Certifications: N/A Required Experience: Minimum of 6 months surgical technologist experience Preferred Experience: 3-5 years of working experience as a surgical technologist and assistant in a specialty line (Cardiology, Neurology, or Orthopedics) Necessary Skills: 1. Strong working knowledge of patient care and basic human needs throughout the life span, 2. Strong working knowledge of anatomic structure and human body system, 3. Strong working knowledge of acute and chronic disease processes, 4. In depth knowledge of medical terminology, 5. Must have excellent verbal and written English communication skills, including but not limited to presentation skills and report writing, 6. Must have expert knowledge, use and demonstration of standard precautions; Expert knowledge, use and experience with aseptic and sterile technique, 7. Must have experience training and precepting staff in Cardio-Thoracic surgery, 8. Must have organization and time management skills including but not limited to organizing, planning and prioritizing work. Age of Patients Served: All Age Groups

Job Description Brand: Moes Summary: The Team Member is responsible for creating quality food and providing quality guest service in a fun, fast-paced environment. Essential Functions: • Responsible for prepping, cooking, packaging and serving food for our guest in a timely fashion. Ensures that the food product meets operational, food safety and brand standards., • Accountable for creating a fun, fast-paced atmosphere for our guests. Greets guests by stating, “Welcome to Moe’s!” Ensures guests are completely satisfied with their order., • Responsible for cleaning prep area, equipment and restaurant in accordance with operational, food safety and brand standards., • Responsible for being punctual, in the correct uniform and maintaining a friendly smile. Must have high integrity and hardworking., • Consistently exhibits the actions/behaviors which best demonstrate the company values; perform all other tasks as directed by the company leadership team to include all restaurant management and their assigned representatives; always represent Moe’s and Quality Fresca, LLC as a professional in every aspect of performance. Education High school diploma or equivalent preferred. Required Knowledge, Skills, and Abilities: • Quality communications to team members, leaders and guest., • Good guest services skills, • Self-disciplined, • Ability to multi-task, • Adherence to company core values – Quality Way Physical and Cognitive Requirements: While performing the duties of this job, the employee is regularly required to communicate clearly, move, and remain in a stationary position. The employee must occasionally transport and/or move up to 50 pounds. The employee must regularly be able to detect, perceive, identify, recognize, judge, inspect, estimate, observe, and assess items, information, and objects in an office or remote office setting; or restaurant environment.

Job Description Job Summary: As a Retread Associate, you will be responsible for assisting in the retreading process of tires. You will work with a team to inspect, buff, repair, and retread tires to ensure they meet safety and quality standards. Qualifications: • High school diploma or equivalent, • Prior experience in a similar role preferred, • Strong attention to detail, • Ability to follow safety protocols and guidelines, • Physical stamina to lift and move heavy tires, • Good hand-eye coordination Responsibilities: • Inspect tires for damage and wear, • Buff and prepare tire surfaces for retreading, • Repair minor tire damage as needed, • Operate retreading machinery following safety procedures, • Monitor retread process to ensure quality standards are met, • Maintain a clean and organized work area, • Assist in inventory management of retread materials, • Follow all company policies and procedures for retreading operations

Job Description Duties and Responsibilities • Advanced understanding of and ability to accomplish, • NAVSEA Standard Item (NSI) 009-73 requirements, • Inspection, testing, installation, removal, and repair of shipboard electrical cabling and electronic equipment, • Cable installations include banding, boxes, connectors, equipment, penetrations, cableway, hangers, and associated components, • MCT, MCP, Stuffing Tube opening, packing, closing, and testing, • Bonding and Grounding of Electrical Equipment, • NSI 009-25 requirements, • EIMB, EPISM and Electrical MIL standards, • Electrical troubleshooting, use of multimeters, megohmmeters and network testers, • Initiate Tagout/ Work Authorization Forms (WAF), • Interpret and breakdown work scope from drawings (arrangement, block-wiring, isometric, cable routing, power, lighting, and IC system removal/installation), • Electrically install Manual Bus Transfers (MBT), Automatic Bus Transfers (ABT), Switchboards, and Transformers, • Electrical Fit up – use of grinders, reciprocating saws, drills, • Lead small electrical teams in the execution of an electrical work item or ship alteration, • Track and report job physical progress and budget performance to your supervisor, • Required to have personal tools to include but not limited to, • Multimeter, • Hand tools, • Hardwire termination tools (Insulated and Non-Insulated Ratcheting Crimpers, etc.), • Perform all work in accordance with the established policies and procedures detailed in the Waveforce Electrical Safety Manual Experience Requirements • Three (3) years direct experience in shipboard electrical installation and repair services, • High School Diploma or Equivalent, • Must be at least 18 years of age, • NSI 009-73 Qualified Connector Fabrication Certification (preferred), • NSI 009-123 Qualified Fiber Optic Handling (preferred), • Must be able to pass Waveforce Electrical pre-employment drug and background screening., • Must be able to obtain government facility and/or shipyard access, to include a DBIDS credential, as required by work locations, • Must successfully complete OSHA 10 Hour Training, Virginia Ship Repair Association (VSRA) Safety Orientation and all required Environmental, Health and Safety orientation training after initial employment, but prior to shipboard work 0keZYW13Vu

Job Description Electrical Superintendent Position Type: Full-time, Exempt, Salary Reports to: Area Manager Supervisory Responsibility: Electrical Team Location: Jacksonville, FL Company Summary Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. Summary Objective The Electrical Superintendent will coordinate and manage the team of electricians responsible for installation, wiring and testing of electrical components of chilled water systems. Responsibilities include task assignments, staff training, inspections and technical problem solving. As a leader, the Electrical Superintendent will be responsible for ensuring Stellar Energy’s highest quality standards are met and that all safety procedures are implemented. Essential Functions • Lead multi-product line operations -- orchestrate electrical installations across diverse chiller system configurations and evolving product designs, ensuring seamless production flow and resource optimization across concurrent projects, • Drive strategic production planning -- collaborate with project management to develop master schedules, allocate electrical resources across competing priorities, and maintain delivery commitments that directly impact customer timelines, • Partner cross-functionally -- work closely with procurement to ensure material availability, coordinate with field technicians on installation requirements, and align manufacturing output with project deployment needs, • Mentor and develop leadership -- provide hands-on coaching to electrical foremen and junior team members, modeling technical excellence and manufacturing discipline while building the next generation of electrical leaders, • Optimize manufacturing capacity -- establish cost estimates, determine optimal manpower levels, and implement process improvements that increase throughput while reducing cycle times and production costs, • Ensure zero-defect quality -- coordinate comprehensive quality inspections across all product lines, maintain ISO 9001 compliance, and uphold Stellar Energy's reputation for flawless performance testing, • Champion safety excellence -- implement and monitor electrical safety procedures across the manufacturing floor, maintain Competent Persons training programs, and enforce compliance to protect team members, • Manage critical infrastructure -- oversee project and subcontractor schedules, coordinate shop floor activities, and ensure tool certifications, calibrations, and equipment availability never limit production capacity, • Adapt to evolving technology -- stay ahead of advancing product designs, integrate new electrical systems and components into manufacturing processes, and ensure the team's technical capabilities evolve with company innovation, • Lead continuous improvement -- proactively identify and implement improved methods of production, eliminate waste, streamline workflows, and drive efficiency gains that give Stellar Energy a competitive edge Competencies • Manufacturing leadership mastery -- proven ability to manage complex, multi-product operations while balancing aggressive schedules, quality requirements, and resource constraints, • Exceptional communication -- superior verbal and written skills to coordinate across internal teams, external partners, and senior leadership, • Extensive and documented knowledge of industrial transformers, LVMCC, HVMCC, and complex electrical systems, • Strong working knowledge of National Electrical Code, NFPA 70E, and electrical safety standards, • Technical authority -- deep expertise in industrial electrical systems with capacity to solve the most complex technical challenges and serve as the definitive resource for the organization, • Strategic partnership -- exceptional collaboration skills to work effectively with project management, procurement, field operations, and plant leadership, • Workforce development excellence -- demonstrated success mentoring leaders and building high-performing teams through hands-on coaching and leading by example, • Financial acumen -- strong budgeting, cost estimation, and resource planning capabilities to optimize electrical operations profitability, • Adaptive innovation -- ability to evolve processes and capabilities as product designs advance, staying ahead of technological change, • Process optimization mindset -- continuous improvement orientation focused on eliminating bottlenecks, reducing costs, and increasing manufacturing efficiency, • Decisive strategic thinking -- capacity to make high-stakes decisions rapidly, prioritize competing demands, and maintain production momentum during challenges, • Systematic organization -- ability to manage multiple product lines, projects, budgets, schedules, and quality systems simultaneously without compromising attention to detail Work Location This position will work out of our Manufacturing facilities in Jacksonville, FL. This position is not approved for telecommuting or working remotely. Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and the ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, with flexibility required to meet production demands and support cross-functional collaboration. First shift days and hours of work are Monday through Friday, 6:00 a.m. to 4:30 p.m. Occasional evening and weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day and occasional visits to job sites. Required Education and Experience. • High school diploma or GED, • 10+ years of experience managing electrical personnel in industrial or manufacturing environments with demonstrated ability to drive multi-project production results, • Journeyman or Masters Electricians License., • 5+ years’ experience mentoring foremen and developing leadership capabilities in team members, • Proficiency with Microsoft Office and production management software for scheduling, budgeting, and reporting Preferred Education and Experience • Experience with ISO 9001 quality management systems in manufacturing leadership role, • Lean manufacturing, Six Sigma, or continuous improvement certification, • Bachelor's degree in Electrical Engineering, Manufacturing Management, or related field Additional Eligibility Qualifications Must have dependable transportation, valid driver’s license, clean back-ground check and random drug screening consent. Work Authorization Must be authorized to work in the USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.