Material jobs in Spring Valley, New YorkCreate job alerts

Job Description 1 Shift available: Monday through Thursday 2nd Shift: 4:30pm to 2:40am; mandatory over-time on Fridays. Full time regular openings for a Finishing Operator. The finishing operator is responsible for set up and operation of inspection and slitting equipment - this includes the usage of computerized camera systems, manual or automatic slitting systems; Ink Jet Equipment for Numbering Essential Functions include the following (Other duties may be assigned): • Completing all necessary paperwork and inspects the order in accordance with Quality Assurance procedures, • Checking for correct copy of the label order using a computerized vision system, • Set up of finishing machine - including web tensions, ink jet system, knife position (by hand or automatic), • Splices out any inferior printed material, • Verifies that all finishing customer specifications are followed, • Packs the finished reels onto carts and applies all required identification, • Communicates with the supervisor on quality issues, • Ability to read and comprehend instructions, short correspondence and memos, • Attention to fine detail and to work to deadlines, adhering to strict customer requirements, • Ability to use a calculator, • Able communicate in English verbally and writing, • Critical thinking Skills (Problem solving, observation, analysis), • Basic mathematical skills including addition, subtraction, multiplication and simple division, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals, • Basic Technical knowledge and ability to trouble shoot The operator position requires the employee to regularly stand, reach with arms, kneel and lift up to 50 lbs. Applicants must have a high school diploma (or General Equivalent Degree) or higher level of education and at least 1 year experience in operating manufacturing equipment. Vision abilities including close vision, peripheral vision, depth perception, and the ability to adjust focus

Overview: Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. We are seeking a Waste Collection Roll Off Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm, Sunday evening through Friday evening but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete. Our Waste Collection Roll-Off Driver’s main responsibility is to safely operate a Roll-Off Truck, for the pick-up service of containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift. A minumum of 1 year of experience driving and operating a Roll Off Truck is required. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Continuously monitor for safety and service-related issues, as well as containers or other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch., • All employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injures, or property damage., • Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair., • Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner., • Notifies Dispatch or Route Manager of issues as prescribed by Service Machine protocol, including blocked containers, potential missed pick-ups or problems that arise on the route., • Communicates customer requests or issues to Dispatch or Route Manager., • Completely dumps all containers and leaves the customer’s location clean and free of debris., • Completes and submits customer tickets when excess yardage must be removed., • Positions containers on the customer’s property in a manner that ensures lids are properly replaced, containers are set in an upright position, and containers do not block driveway entrances or traffic., • Work closely with Route Supervisor to improve route efficiencies and identify best practices., • Attend all required training, operational meetings, and mandatory monthly Safety Meetings, • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards, • The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route., • Must be able to work outdoors in all kinds of weather., • Drivers must be able to physically mount and dismount the truck throughout the duration of the workday. Requirements and Qualifications::, • Applicants must be at least 21 years of age and legally eligible to work in the United States., • All Drivers must have a valid Class A or B CDL with airbrake endorsement, and a clean driving record., • At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred., • At least 1 year of experience driving and operating a Roll Off Truck, • Working knowledge of DOT, OSHA, and applicable traffic regulations., • Must be able to speak and read English well enough to converse with the public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records., • Must be able to read and understand a map., • Must be able to meet the physical and safety requirements of the position. Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Drug-Free Workplace. Salary Range Minimum: USD $32.58/Hr. Salary Range Maximum: USD $32.58/Hr.

Overview: Action Carting Environmental Services/ Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Pennsylvania, and Ohio. We cater to a diverse range of industrial, medical, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. We are seeking a Waste Collection CDL Driver who will be working out of our Jersey City Depot (264 Broadway, Jersey City, NJ 07306) servicing NYC Routes and reporting to the Site Manager but is also subject to supervision by Route Supervisors and Dispatchers. This is a full time, Union, non-exempt, hourly position with an overnight schedule starting anywhere between 7pm and 9pm but may vary depending on business needs. Shifts may vary from 10 to 12 hours per evening or until the route is complete. This Depot will be servicing our NYC routes. Working alongside a Helper, our Waste Collection CDL Driver’s main responsibility is to safely operate a rear-loading truck, for the pick-up service of bags or containers filled with waste or recyclable material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • The driver is responsible for safely operating the truck in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws., • Performs pre- and post-trip inspections of assigned vehicle using utilizing standard DVIR (Driver Vehicle Inspection Report); notes all issues on DVIR form for corrective review/repair., • Ensuring that the container and its content are always secure. This includes periodically checking tarps and ties, and may require the driver to climb onto containers and/or reach overhead., • Perform pre- and post-route inspections of assigned truck and document any safety issues on standard reports., • Continuously monitor for safety and service-related issues, as well as containers of other equipment in need of repair, and report any issues to the Route Supervisor or Dispatch., • All IWS employees are expected to be responsible and accountable for the safety for themselves, their colleagues, the trucks, and other equipment and property. Drivers must immediately notify Route Supervisor or Dispatch of any incidents, accidents, injuries, or property damage., • Communicate professionally with customers and Dispatchers at all times. This includes receiving complaints about schedules and quality of service. Our Drivers must make note of and report on any such complaints and respond in a courteous and respectful manner., • Attend all required training, operational meetings, and mandatory monthly Safety Meetings, • Maintain a clean, safe work area in compliance with Corporate / OSHA Standards, • Performs other duties as assigned. Requirements and Qualifications::, • Applicants must be at least 21 years of age and legally eligible to work in the United States., • All Drivers must have a valid Class A or B CDL and a clean driving record., • At least 1 year of experience operating a vehicle requiring a CDL A or B, within the last 7 years. Experience as a Driver or Helper for a refuse company is highly preferred., • Working knowledge of DOT, OSHA and applicable traffic regulations., • Must be able to speak and read English well enough to converse with the general public, understand highway traffic and signals, respond to official questions, and be able to make legible entries on reports and records., • Must be able to read and understand a map, • Must be able to meet the physical and safety requirements of the position., • The Driver position may be required to lift up to 50 pounds, as well as mount and dismount the truck multiple times every route., • Must be able to work outdoors in all kinds of weather. Action Carting Environmental Services/ Interstate Waste Services provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state and local laws. Drug-Free Workplace. Salary Range Minimum: USD $31.46/Hr. Salary Range Maximum: USD $31.46/Hr.

Overview: Interstate Waste Services is Now Hiring CDL B Truck Drivers! Front Load / Side Load, Roll OFF and Rear Load Drivers Safety is our first Priority! $28.00/Hour Overtime Pay after 40hrs in a work week Please Note: In order to be considered - you must include your resume/job history when applying Highlights: • Monday thru Friday with occasional Saturday hours, • Early start time - 1am, • Hourly Pay Rate: $28.00, • Year Round-Steady work, • Full UNION Benefits packet with PTO, • 1 Year verifiable CDL experience with driving garbage trucks required Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, and recently expanded our operations of transfer stations into Pennsylvania and Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. We have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: Job Highlights: • Drivers are Responsible for Safely Operating Front, Side, or Rear-Loading Trucks, for the Pick-Up Service of Bags or Containers Filled with Waste or Recyclable Material. Drivers transport the material to a disposal, transfer or recycle facility, and may make one or more trips throughout the shift, • Drivers Transport the Material to a Disposal, Transfer or Recycling Facility, & May Make One or More Trips Throughout the Shift, • We Deploy Both Manual & Automatic Trucks, • The Driver Position May Be Required to Repeatedly Lift up to 50 Pounds, & Move & Maneuver up to 100 Pounds, As Well As Mount & Dismount the Truck Multiple Times Every Route Requirements and Qualifications:: Requirements: • 21 Years of Age & Legally Eligible to Work in the United States, • Valid Class A or B CDL, • Airbrake Endorsement, • 1-year CDL driving experience with Garbage Trucks in the last 7 years., • Great Safety Record and Clean MVR, • Experience as a Driver or Helper for a Refuge Company is Highly Preferred, • Working Knowledge of DOT, OSHA & Applicable Traffic Regulations, • Ability to Speak & Read English to Converse with the General Public, understand Highway Traffic & Signals, Respond to Official Questions & Make Legible Entries on Reports & Records, • Read & Understand a Map, • Meet Physical & Safety Requirements of the Position., • Willing & Able to Work Required Worked Hours as Allowed Under DOT Regulation & May Include Weekend, Night &/Or Holiday Work Additional Job Requirements: • Routes may require Drivers to navigate through congested communities and confined or tight areas in city locations., • Highly skilled backing maneuvers are essential to successfully perform this job., • Our drivers routinely climb in and out of the truck cab to service customer accounts., • Driver pre and post inspections required. Drivers are responsible for ensuring their truck is in compliance with IWS’s safety standards as well as OSHA and DOT regulations, and local traffic laws, prior to and while operating the vehicle. Additional Information: IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Salary Range Minimum: USD $28.00/Hr. Salary Range Maximum: USD $28.00/Hr.

Job Description PRODUCTION WORKER Adecco is currently assisting an established production facility located in Orangeburg, NY. We have opportunities for Packers, Machine Operators, Lead Operators and Material Handlers. These positions start as temp but will become permanent for the right candidate(s) in just three to four months! We are looking for people who can: · Inspect incoming and outgoing materials for quality and compliance with specifications, reporting any discrepancies or issues to maintain high standards. · Safely and efficiently transport raw materials, components, and finished products throughout the facility. · Efficiently assemble and pack sanitation wipes into designated packaging, ensuring proper sealing and labeling according to quality and safety standards. · Operate and maintain packaging machinery and equipment, performing routine checks and basic troubleshooting to ensure smooth and efficient packing processes. What’s in this for you? · Comprehensive benefits · Weekly Paycheck /Daily Pay · Access to thousands of Upskilling courses. To be considered for these positions, you must meet the following requirements: · Proficient in English. · Reliable Transportation & Good Attendance. · Willing to cross-train and learn functions of various jobs. We frequently have openings on the following shifts: 1st shift: 7 AM – 3 PM 2nd shift: 3 PM – 11 PM 3rd shift: 11 PM – 7 AM Apply today for immediate consideration. You can email or call . Pay Details: $15.50 to $18.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Company Overview Our client provides safe and environmentally responsible concrete washout solutions for construction sites. The company was established to replace outdated washout methods with a controlled, compliant, and efficient system. Their washout pans are designed to capture and contain all concrete washout water and material, supporting cleaner worksites and meeting environmental requirements. Position Overview: We are looking for a reliable and experienced Class B CDL Driver to join our growing team in the construction site clean-up industry. In this role, you will be responsible for transporting materials efficiently to various construction zones. You will ensure timely deliveries while adhering to all traffic laws, safety regulations, and company policies. Location: Orange County, NY Job Type: Full-Time, Travel Salary: $28-$32 per hour Schedule: Monday- Thursday, 7am-5pm; Friday, 7am-3pm Key Responsibilities: • Operate a Class B Knuckle Boom vehicle to transport containers to assigned various job sites., • Ensure safe loading and unloading of materials, ensuring proper handling and securing of loads., • Adhere to all traffic laws, safety protocols, and DOT regulations., • Communicate effectively with dispatchers and customers to provide updates on delivery status., • Valid Class B Commercial Driver’s License (CDL) or CDL A., • Clean driving record with no major violations., • Minimum of 2 years of experience as a CDL Class B driver or CDL A., • Previous experience driving a Knuckle Boom truck, preferred, not required., • Ability to lift, move, and secure heavy loads., • Strong time management skills. EEO Statement we are an Equal Opportunity Employer, and we do not discriminate on the basis of race, color, religion, gender, national origin, age, disability, or any other status protected by applicable law. We value and are committed to creating an inclusive environment for all employees. Please Note: Topaz HR is conducting this search on behalf of one of our clients. The employer's name will be disclosed during the interview process, and all hiring decisions will be made directly by the client.

Job DescriptionSalary: Multi-year long-term opportunity to work with a great team year-round and be home at night! We are looking for a highly motivated Gas Distribution Inspector to provide leadership and inspect gas construction projects Northwest of NYC in Orange and Rockland Counties. This is a great opportunity for experienced gas mechanics to demonstrate your leadership and advance your career. You will be responsible for ensuring that all construction activities adhere to company standards, regulatory guidelines, and industry best practices. This position is crucial for upholding the safety and integrity of gas distribution systems in the region. The pay rate varies based on experience and OQs. Responsibilities • You will be required to inspect work performed by construction contractors and supervise assuring adherence to specifications, proper work methods, and appropriate use of facilities and equipment., • Must be able to read and interpret drawings, maps, plans, specifications, and procedures. They must possess the ability to keep accurate and detailed field records including daily job reports, material usage and locations, and field test records., • Be knowledgeable in the requirements of OSHA. All inspectors will be required to ensure that any job theyre overseeing is maintained in a safe manner and meets or exceeds safety and environmental policies and procedures. Inspectors will need to make sure the contractors equipment is being used within their limits., • Present a neat appearance. Have strong communication skills to interact and coordinate professionally, on a daily basis., • Have strong organizational skills to complete daily paperwork, maps, and documentation with a clear comprehension of construction units of measurement., • Inspectors must be able to understand and implement all Environment, Health, and Safety Plan (E-HASP) requirements. Ensures that each contractor complies with the respective environmental rules and regulations for each respective project location., • Be capable of handling customer inquiries and complaints in a professional and courteous manner., • Provide input in conjunction with Quality Assurance field visits., • Have prior experience and training in excavation, road, or utility construction with an emphasis on plastic pipe installation. Inspectors will be required to oversee construction projects on Underground Distribution and other types of utility projects., • Have a minimum of a High School diploma, G.E.D., or equivalent work experience., • An Inspector may be required to oversee multiple construction projects at varying stages at one time (from designing to completed final folder close out)., • An Inspector must possess managerial skills, computer literacy, and a working knowledge of the utility industry., • We will assist with necessary OQ requirements and career advancement.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC’s electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities • Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements., • Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM)., • Verify material certifications, supplier documentation, and compliance with required standards., • Record and maintain inspection results, nonconformance reports, and supplier performance data., • Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials., • Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions., • Control of MRB and quality hold areas., • Follow and support ISO 9001:2015 quality management processes., • Ensure inspection tools and gauges are calibrated and in good working condition., • Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required • Minimum 2–4 years of experience in a quality control or inspection role., • Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment., • High School Diploma or equivalent required., • Technical or trade school training in mechanical inspection, or a related field is preferred., • Ability to read and interpret engineering drawings, blueprints, and GD&T specifications., • Proficient in the use of precision measuring instruments and inspection equipment., • Understanding of material certification requirements and industry quality standards., • Experience with CMM operation and basic programming a plus., • Strong attention to detail and accuracy in record-keeping., • Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary • Microsoft Office, • Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements • Ability to stand for extended periods during inspections., • Ability to lift up to 50lbs. occasionally.

Job Description Comment: Plans, schedules and monitors inbound movement of materials from suppliers. Determines material requirements and coordinates the efficient movement of materials with purchasing, production and engineering. Develops specifications for new contract orders. This is an individual contributor role that requires the use of judgement in applying professional expertise and is expected to work independently with minimal supervision. Roles typically require a university degree or an extensive amount of practical knowledge gained through experience. Job requires an understanding and application of procedures and concepts of own discipline. The job requires the ability to make judgements based on practice and previous experience. This job typically requires a degree or equivalent and no experience.

Job Description Assistant Project Manager – Commercial Construction Location: Montvale, NJ Company: Nexgen Builders LLC Salary: Commensurate with experience Job Type: Full-Time About Nexgen Builders Nexgen Builders is a leading construction management firm based in Lakewood, NJ, focused on delivering complex commercial, mixed-use, and healthcare development projects with precision, quality, and speed. Position Overview We are seeking a highly motivated and organized Assistant Project Manager (APM) to support the Project Manager and project executive team on a large commercial construction site. The APM will assist with all aspects of construction management, including project coordination, subcontractor support, documentation control, and daily field oversight. This is an excellent opportunity for someone looking to grow their career in commercial construction and gain hands-on experience managing large-scale developments. Key Responsibilities • Assist the Project Manager with daily project operations and site coordination, • Help manage and update construction schedules, bid leveling sheets, and procurement logs, • Support all communication with subcontractors, vendors, and consultants, • Perform material tracking, delivery confirmations, and follow-ups on outstanding orders, • Help monitor jobsite quality control and ensure adherence to Nexgen standards, • Maintain and file daily job logs, photos, inspection reports, and RFIs, • Schedule and participate in project meetings, taking and distributing meeting minutes, • Track open issues and follow up on action items across stakeholders, • Ensure proper sequencing and inspections are completed by trades, • Assist in managing permitting, approvals, and inspection logistics, • Review subcontractor invoices and coordinate documentation for payment processing, • Attend walkthroughs, inspections, and contribute to punch list documentation, • Collaborate with the Project Manager to prepare weekly reports and updates for internal teams Qualifications • 2–5 years of experience in commercial construction or construction management, • Working knowledge of construction plans, trade coordination, and site logistics, • Experience with Procore or similar construction/project management software preferred, • Strong organizational skills and attention to detail, • Ability to multitask and remain calm in a fast-paced environment, • Proficient in Microsoft Office Suite (Word, Excel, Outlook), • Excellent written and verbal communication skills

Job DescriptionQuality Controls is a representative and stocking distributor of flow control equipment, process equipment and process instrumentation. We maintain a large inventory of valves, gates, actuators and instrumentation to meet our customers’ demanding requirements. Our ability to warranty the material that we sell has earned us high praise from our customers and the owners of the facilities where our equipment is installed. Quality Controls, Inc. was founded in 1992 and has always focused on solving customer needs with a mantra of “Commitment to Quality and Service.” The role of Outside Sales Specialist within Quality Controls requires that you establish/maintain relationships with municipalities, consulting engineers and local general contractors working in the municipal market to promote sales and solutions represented by QC in the metropolitan NYC Market. Utilizing QC’s network of resources and partner companies, you will develop marketing strategies, exhibit at local trade shows, and strategize with your divisional team to optimize your territory’s sales potential through a variety of technologies and solutions. The Outside Sales Specialist position is an outside sales role requiring you to meet and be comfortable conversing with consultants, treatment plant-level personnel and contractors. Plant level or direct sales activities require in-person consultation, demonstration, and problem-solving skills. You will be required to travel throughout the metropolitan NYC sales territory. What you'll do: • Expand existing relationships with end users, contractors, and engineers while building lasting relationships with new accounts., • Provide engineers and end users a professional level of product promotion/selection, support and follow up to ensure projects are successful and to maximize sales revenue., • Travel within assigned sales territory; Metro NYC., • Be self-motivated to set up meetings, product promotion events, and relationship building activities to maintain frequent contact with your customer base., • Attend product training seminars and participate in local industry associations and trade shows., • Travel to represented (manufacturer) companies for training on an as-needed basis., • Work with end-users with a hands-on approach. This may entail assisting with commissioning new equipment., • Work with the inside sales staff to provide a managerial role for projects and the management thereof., • Provide monthly sales reporting including forecasting and insights to current bid activity.Background/ Experience:, • 3+ years of outside sales experience. Experience selling mechanical equipment like valves, actuators, and pumps desired., • Water/ wastewater experience desired., • Exceptional communication skills; both verbal and written., • Valid US Driver License, • Minimum of a Bachelor’s degree in a technical field or military experience with 4 years professional experience., • The ability to travel overnight up to 20%., • Great organizational and relationship skills., • Proficient with Microsoft 365 and familiar with CRM systems.Compensation:, • $100k-$120k + commission

Job Description Location: Pearl River, NY Job Title: HVAC Installer Are you ready to roll up your sleeves and join a team that's all about your growth and success? We're not just about the job—we're about building careers that last. We're proud to be a company that values good old-fashioned hard work and the satisfaction of a job well done. We work hard, but we have fun, too! You'll be a crucial part of our team as an HVAC Installer. You'll install and connect various HVAC systems, ensuring they operate efficiently and meet all safety and quality standards. We're looking for individuals who take pride in their work, have a strong work ethic, and are eager to learn and grow alongside our team. Responsibilities and Expectations: * Install, maintain, and repair refrigeration, heating, and air conditioning systems. * Capable of independently performing the entire installation process to collaborate with team members to make sure the job is done efficiently with no callbacks. * Ensure efficient material usage and maintain sufficient equipment stock. * Collect payment or payment details from customers for services rendered. * Maintain company vehicle and equipment, ensuring cleanliness and proper functioning. * Prepare invoices, daily route sheets, and weekly reports as necessary. * Maintain accurate logs of all work performed. * Ensure our reputation for superior service is maintained during all interactions with customers. * Fulfill additional responsibilities as required, including cross-training in various roles. Requirements: * 5+ years of Residential HVAC Installation experience. * EPA Universal Certification. * Heating/Boiling/AC experience required. * Exceptional customer communication skills. * A team player who thrives in both collaborative and independent settings. * An enthusiastic and positive individual eager to embrace challenges. * Physically able to work on HVAC units - Must be able to lift 50 pounds at a time. * Prolonged periods of standing, kneeling, crawling, or climbing ladders. * Ability to work outside; exposed to heat and cold. What Can We Do for You? * Competitive Compensation ranges between $25 - $32/hour! * Stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental, and vision insurance * Long-term disability and company-paid life insurance. * 401K plan with company match. * PTO and paid holidays. * Company-provided vehicle, phone, and tablet. The compensation for this position is expected to range between $25.00 - $32.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job DescriptionDescription: This role requires you to be highly organized, and detail-oriented to manage the daily coordination of service calls, technician scheduling, and customer communication for HVAC and Fireplace Divisions. This role is essential to ensuring smooth field operations, efficient technician routing, and exceptional customer experiences. The ideal candidate thrives in a fast-paced environment, is a strong communicator, and has experience using FieldEdge. The essential functions include, but are not limited to the following: Daily Scheduling & Dispatching • Assign and dispatch technicians based on skillset, job type, and geographic location utilizing FieldEdge CRM System., • Monitor job progress and communicate updates or changes with field staff and customers., • Answer incoming service calls, emails, and messages with professionalism and urgency., • Provide customers with job updates, ETA notifications, and appointment confirmations., • Handle last-minute schedule changes and resolve scheduling conflicts., • Work closely with service technicians, office staff, and sales teams to ensure accurate and timely job execution., • Verify that all required information (materials, notes, permits, etc.) is included before job dispatch., • Use dispatching software (FieldEdge, etc.) to schedule jobs, update statuses, and log notes., • Track job progress and completion in real time., • Deposit A/R checks daily., • Work with the inventory/purchasing team to confirm material availability before dispatching., • Support administrative tasks related to job closeout, customer follow-up, or warranty claims., • 2+ years in dispatching, scheduling, or operations coordination (HVAC, plumbing, or related field preferred), • Experience using field service management software (e.g., FieldEdge), • Strong understanding of geographic mapping and technician routing, • Excellent communication and interpersonal skills, • Highly organized with strong multitasking abilities, • Able to work well under pressure and adapt quickly to changing priorities, • Comfortable with technology, CRM systems, and data entry, • Familiarity with HVAC systems and terminology., • Experience optimizing routes and schedules for field service technicians., • Knowledge of customer relationship management (CRM) tools.

Job Description Strides Pharma Inc. is seeking an experienced and detail-oriented Analytical Quality Assurance Supervisor to lead our AQA operations in Chestnut Ridge, NY. The AQA Supervisor will be responsible for overseeing the review and approval of analytical data, ensuring compliance with cGMP regulations, and supporting product release and regulatory submissions. This role will collaborate cross-functionally with the Quality Control, Regulatory Affairs, and Manufacturing departments to maintain high standards of product quality and integrity. Responsibilities • Manage all Analytical and Quality Control (QC) activities to ensure compliance with cGMP, FDA, EMA, and ICH guidelines., • Lead a team of data reviewers, ensuring accurate, complete, and timely review of raw data, analytical results, and laboratory documentation., • Supervise the Stability Program and Coordinator, including protocol approval, sample pull scheduling, data review, and reporting., • Ensure analytical data integrity through implementation and oversight of robust review processes and audit trails., • Collaborate with QC, QA, and R &D departments to support method validations, transfers, and investigations., • Review and approve analytical documentation such as CoAs, method validation/verification protocols and reports, and stability summaries., • Lead or support investigations into out-of-specification (OOS), out-of-trend (OOT), deviations, and laboratory incidents., • Support regulatory inspections and internal/external audits, providing documentation and subject matter expertise., • Drive continuous improvement initiatives in QA/QC processes and systems to ensure operational excellence and regulatory readiness., • Mentor, coach, and develop the AQA team to build a high-performing quality organization, • Coordinate workload sharing with other groups in QC and develop action plans to improve the working environment and for maximization of laboratory efficiency., • Prepare monthly report of the issues, work done, any employee related issues and conduct bi-weekly audits of the analyst’s notebooks., • Review/Approve SOP’s, procedures and monographs for the QC Group as needed., • Review and comment on the articles affecting QC in the USP Supplements and Pharmacopeial Forums., • Conduct periodic audits of the analyst notebooks and instrument logbooks to ensure compliance of cGMP’s., • Evaluate potential candidates for QA; performance evaluation of direct reports., • Coordinate data review for analytical tests, including but not limited to HPLC, UV-Vis, IR, and Raw Material, Finished Product, Stability testing. Qualifications • Bachelor’s degree in Chemistry, Pharmaceutical Sciences, or related field (Master’s or Ph.D. preferred), • Minimum of 10 years of experience in pharmaceutical analytical quality assurance or quality control, • Proven leadership or supervisory experience in a GMP-regulated environment, • Experience with analytical instrumentation (HPLC, GC, UV, IR, etc.) and associated data review, • Demonstrated management and leadership experience with strong interpersonal and influencing skills., • Strong understanding of FDA regulations, cGMP, ICH guidelines, USP/EP compendia, • Knowledge of pharmaceutical manufacturing processes and laboratory practices, • Familiarity with regulatory submission requirements (ANDA, NDA, etc.), • Proficiency with laboratory software and documentation systems (e.g., Empower, LIMS, TrackWise), • Organizational Support - Follows policies and procedures; completes administrative tasks correctly and on time; supports organization's goals and values; benefits organization through outside activities; supports affirmative action and respects diversity., • Leadership - Exhibits confidence in self and others; inspires and motivates others to perform well; effectively influences actions and opinions of others; accepts feedback from others; gives appropriate recognition to others., • Supervising People - Includes staff in planning, decision-making, facilitating and process improvement; takes responsibility for subordinates' activities; is available to staff; provides regular performance feedback; develops subordinates' skills and encourages growth; solicits and applies customer feedback (internal and external); fosters quality focus in others; improves processes, products and services.; continually works to improve supervisory skills., • Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality., • Demonstrated flexibility in carrying out varied assignments in a high quality work environment., • Excellent written and oral communications skills with a strong emphasis on organizational capabilities., • Excellent analytical thinking and problem-solving skills, • Strong attention to detail with a commitment to quality and compliance, • Effective leadership, team management, and interpersonal communication, • Ability to prioritize and manage multiple tasks in a fast-paced environment, • Proficient in technical writing and reviewing complex data and reports Physical Requirements • Ability to sit or stand for extended periods, • Occasionally lift up to 25 pounds, • Use of personal protective equipment (PPE) as required in laboratory or production areas, • Ability to work in office, laboratory, and manufacturing settings as needed, • The work environment is representative of a group laboratory environment.

Estimator – Commercial Roofing Tappan, NY $120k - $135k + Commissions Choose quality over chaos and find a place where you can finally feel at home, and watch your work become a legacy, not just a paycheck! You’ll join a company that gives you every opportunity to climb the ladder and shape your future. With senior leaders ready to pass the torch, the stage is set for you to step up and make your mark. This is a true family culture that will welcome you in and give you every tool you need to succeed. You will be the face of the company, carrying the legacy forward and protecting a reputation built on decades of excellence. This established contractor provides the leads it’s up to you to nurture and close them. The real question is, do you have what it takes to own the spotlight and lead the next chapter? Benefits · 401K · Health Insurance · $600 Vehicle allowance + Mileage · 14 Days PTO + Personal/Sick days Company Overview Established in 1973, this family-owned contractor operates primarily across the New York City metro area and surrounding New Jersey counties. The company is known for its strong reputation, fair and approachable ownership, and commitment to quality and reliability. Specializing in re-roofing, which makes up 90% of their projects, they handle a diverse mix of universities, commercial buildings, warehouses, office spaces, and retail centers. The culture is built on family values and long-term relationships, offering a steady, supportive, and team-focused environment where employees know who they are working with and enjoy a slower, more intentional pace. Many on the team have chosen to join from the city for a better work-life balance and a more grounded, community-centered atmosphere. Your Role · Manage current accounts, handle repeat business. · Handle material ordering and perform handover to Directors · Visit on site 2-3 times per week. Taking cuts and doing take offs on site Requirements · 3+ Years commercial roofing estimating experience · Strong Knowledge of commercial roofing systems · Ability to sell is desirable APPLY NOW! And you will hear back in 48hrs! Don’t have a resume? No problem, just get in touch with me directly: / 321 - 213- 9181

Job Description Heavy Equipment Operator/Foreman-Civil Division Do you thrive in a hands-on leadership role where safety, teamwork, and precision matter? We’re looking for a dependable, experienced Heavy Equipment Operator/Foreman-Civil Division to lead our excavation projects and keep things running smoothly from start to finish. This is more than just operating equipment, it’s about guiding a crew, coordinating with other teams, and ensuring every project is delivered on time, on budget, and with the highest safety standards. What You’ll Do: * Supervise and coordinate daily activities of excavation crews. * Inspect job sites, equipment, and progress to ensure quality, safety, and compliance. * Read and interpret blueprints and construction plans to plan project procedures. * Order and track materials and supplies as needed. * Accurately locate, measure, and mark site locations for structures and equipment. * Coordinate work activities with other crews and project stakeholders. * Assign tasks based on crew needs and material requirements. * Train team members on equipment operation, safety procedures, and company policies. * Manage project timelines to ensure work is completed on schedule and within budget. * Maintain equipment service and maintenance logs. * Report any accidents or incidents to management promptly. What We’re Looking For: * A proven leader with experience in excavation and site operations. * Strong knowledge of construction methods, safety regulations, and equipment operation. * Ability to read and interpret blueprints and site plans with confidence. * Excellent communication, organization, and problem-solving skills. * A safety-first mindset and a commitment to quality work. Why You’ll Love Working With Us: * 401(k) * Insurance benefits * Company truck and fuel allowance * Be part of a team that values professionalism, safety, and collaboration. Pay In accordance with New Jersey’s Pay Transparency Law, the expected salary range for this role is $100,000 – $125,000, based on experience and qualifications. Powered by JazzHR FqQVUjswMf

Job Description Mold Maker – Manufacturing | Congers, NY Shift: Thurs–Sun or Fri–Sun, 6:00 PM–6:30 AM Pay: $42–$57/hr (based on experience) Type: Full-time, Direct Hire Build precision. Shape the future. ZING Recruiting is looking for a skilled Mold Maker to join a top-tier manufacturing team in Congers, NY. This isn’t a routine shop job—it’s hands-on, high-impact work where your expertise in CNC machining, tooling, and injection molding keeps production running at peak performance. What You’ll Do: * Fabricate, maintain, and repair molds, tooling, and metalworking dies * Tear down, rebuild, and troubleshoot mold issues (flashing, galling, venting, cooling—you know the drill) * Operate CNC lathes, mills, grinders, and other precision equipment * Ensure every component meets tight dimensional and visual specs * Keep clear records and communicate directly with the Molding Manager * Suggest design tweaks or material improvements that boost efficiency What You Bring: * 5+ years of mold or toolmaking experience * Strong understanding of molding processes and troubleshooting * Mastery in blueprint reading and precision measurement * Mechanical know-how and math skills that make the difference * Ability to handle the physical side—standing, lifting, climbing, and bending * Bonus points for pharmaceutical, ISO, or injection molding experience Why You’ll Love It Here: * Excellent pay: $42–$57/hr, depending on experience * Full benefits package: health, dental, vision, life, disability, 401(k) with match * Paid time off, holidays, and parental leave * Award-winning corporate training and growth opportunities * A fast-paced, innovative manufacturing environment where your work truly matters About ZING Recruiting: For over 33 years, ZING has connected top talent with great companies. We’re all about “linking communities through employment,” prioritizing safety, inclusion, and long-term success for every associate and client. #ZINGNJ #ZINGZIP #zingnjhv #LI-JD1 Company DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job Description We are a large electrical contractor. We specialize in indoor electrical construction and maintenance, including complete design build construction, for agencies, utilities, and private enterprises. Responsibilities: • Prepare detailed, accurate, and competitive cost estimates for a variety of electrical construction projects., • Analyze blueprints, specifications, proposals, and other documentation to prepare time, cost, and labor estimates., • Consult with clients, vendors, personnel in other departments, and construction foremen to discuss and formulate estimates and resolve issues., • Conduct special studies to develop and establish standard hour and related cost data or to effect cost reduction., • Review material and labor requirements, to decide whether it is more cost-effective to produce or purchase components., • Prepare cost and expenditure statements and other necessary documentation at regular intervals for the duration of the project., • Prepare and maintain a directory of suppliers, contractors, and subcontractors., • Set up cost monitoring and reporting systems and procedures., • Establish and maintain tendering process, and conduct negotiations. Qualifications: • Minimum of 3 years of experience in electrical estimating or a related field., • Strong understanding of electrical construction processes., • Proven experience in project management., • Ability to read and understand electrical plans and specifications., • Excellent analytical and numerical skills., • Strong communication and negotiation skills., • Detail-oriented with the ability to multi-task., • Ability to work under pressure and meet tight deadlines. Company DescriptionRecruiting CompanyRecruiting Company

Job Description Key Responsibilities: * Prepare detailed cost estimates for residential and commercial projects, including labor, materials, equipment, and subcontracted work. * Solicit and evaluate (level) bids from subcontractors and suppliers to ensure competitive and accurate pricing. Meet with subs on site, as needed, to qualify and coordinate their bids. * Review and interpret plans, specifications, and scopes of work to confirm completeness and identify potential gaps or conflicts. Draft RFI's as needed and communicate with design teams. * Work closely with project managers and ownership to develop preliminary budgets, cost breakdowns, and value-engineering options. * Support the contract negotiation and buyout process, including preparation of subcontractor scopes and purchase orders. * Maintain and update historical cost data and unit pricing databases for future reference. * Assist with proposal development, including bid forms, pricing summaries, and supporting documentation. * Collaborate with operations and field teams to ensure a seamless project handoff after award. * Stay current with market trends, labor rates, and material pricing to maintain competitive estimating accuracy. Qualifications: * 3-5+ years of experience in estimating, preconstruction, or cost management within the construction industry. US experience required. * Strong knowledge of construction methods, materials, and building systems. * Ability to read and interpret architectural and engineering drawings and specifications. * Proficiency in Microsoft Excel and familiarity with estimating or takeoff software (e.g., Bluebeam, PlanSwift, ProEst, or similar). * Must have a car or vehicle. * Excellent analytical, organizational, and communication skills. * Ability to manage multiple bids and deadlines simultaneously. * Strong attention to detail and commitment to accuracy. * Bachelor's degree in Construction Management, Engineering, Architecture, or related field. * Experience with project management platforms such as Monday.com, Procore, or Buildertrend. * Experience in industrial, manufacturing, and commercial projects. * Familiarity with NY/NJ construction market pricing and subcontractor networks. * Valid driver's license

Job DescriptionDescription: RK Pharma Inc, a vertically integrated pharmaceutical company with our main manufacturing site in Pearl River, NY, is seeking a Quality Control Chemist to work with our growing Quality Teams as we scale towards commercial manufacturing in the next upcoming months. As a company focused on the development, manufacturing and sale of high quality and affordable generic pharmaceutical products worldwide we are looking for sharp, driven, self-directed individuals to help us grow our mid-stage start-up team. Requirements: If this sounds interesting to you, it’s probably because up to this point you have: • Bachelor of Science of higher, • 0-3 years of quality Control experience, preferably in a pharmaceutical, manufacturing, or regulated environment., • Familiarity with cGMP, GDP, and standards., • Proficiency in Microsoft Office (Word, Excel, Outlook, PowerPoint) and experience with ERP or document management systems (e.g., SAP, Master Control)., • Excellent organization, time management, and communication skills. The main responsibilities for this position are: • Perform daily verification /performance check of the QC analytical instruments such as Analytical balance, Microbalance, KF titrator, KF coulometer, Auto titrator etc.,, • Perform calibrations of all the QC analytical instruments/equipment’s as per the calibration calendar schedule or when required., • Perform Instrument/ equipment performance qualification as and when required., • Maintain inventories of chemicals, Standards, samples etc.,, • Operation, calibration, maintenance and qualification of all analytical instruments such as HPLC, GC, TOC, UV, IR, automatic titrator, dissolution equipment, etc., • Follow the procedures as per the SOP’s/ guidelines., • Perform Sampling of raw materials, drug substance, packaging components, stability samples, cleaning samples, In-process samples and finished products., • Perform analytical tests and wet chemistry tests on raw materials, drug substance, packaging components, stability samples, cleaning samples, In- process samples and finished products in compliance with the STP and SOP’s., • Follow and document all test results under GLP, GDP, GMP and Lab Safety guidelines., • Document test results, problems and other issues, perform troubleshooting of issues that arise during analysis., • Logging various samples received to QC as per the SOP into their respective log books., • Monitors Stability chambers, Photostability chamber, freezers, refrigerators etc., • Performs Stability samples loading/charging and pull-out according to the stability calendar., • Record the results and prepares CoA to be released in a timely manner., • Perform analysis using various software’s such as Empower, Tiamo, Spectrum two, Flex etc., • Write and perform investigation of out of specification results., • Train other QC chemists in a timely manner on all the general Laboratory SOPs and test methods., • Preparation and review of Standard Operating Procedures, specifications and STP’s for Raw materials, Packaging components, drug substances and finished products (based on ICH/Pharmacopeial reference)., • Preparation and execution of protocols for Method Validations, Method Transfers, Cleaning Validation, Raw material qualifications, Stability studies and any other studies., • Maintains lab, instruments, logbooks and notebooks at all times., • Maintains lab instruments and performs calibration/preventive maintenance to ensure proper working order and troubleshoot when necessary.

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: • Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis., • Clear area of previous job materials., • Completes job cards, routers and job documentation as required., • Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies., • Maintains material traceability by completing records of materials usage for each job., • Monitors and performs visual and tactile inspection of assembled parts., • Performs proof-loading of assembled parts., • Gathers samples for start-up and in-process testing and inspection., • Packages and labels processed material according to job card instructions., • Reports part or process quality issues to their supervisor or any quality personnel., • Any other duties as assigned by supervisor. Requirements: • Prior experience is preferred but not required., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job Description Job Summary - The purpose of this job is to oversee the production schedules in accordance with approved production instructions, standard operating procedures, while utilizing cGMP for the preparation of commercial product. Monitor and document in a periodic performance review the performance of the production staff. Identify opportunities for process and equipment improvements. Mentor staff and set goals and objectives for the production personnel. Chestnut Ridge Operations 1st & 2nd shift Key Accountabilities Accountability & Responsibilities Manufacturing Operations Management • Assure the accurate execution of cGMP/DEA documentation relative to manufacturing and packaging activities., • Assure the accurate manufacturing of bulk drug product for delivery to primary packaging without deviation., • Assure the accurate packaging of drug product in approved primary packaging components without deviation., • Assure the accurate sampling of raw material and the packaging of samples for shipment as appropriate to contract testing laboratories., • Assure the accurate assessment of component inventory and reconciliation., • Assure staff training requirements are established and complete prior to the performance of process or procedure., • Assure the accurate performance of basic routine preventive maintenance of equipment and facility cleaning activities by operators., • Establish performance Goals and Objectives based on facility needs and High Corporate Standards., • Complete routine performance evaluations of staff and recommend growth opportunities., • Assure adherence to established production schedules and monitor production performance as determined by the Plant Director., • Undergraduate Degree in Pharmacy, Engineering, or equivalent in training and experience., • 10 years’ experience in a pharmaceutical manufacturing environment., • Prior cGMP experience in a pharmaceutical production environment is necessary., • Knowledge of workplace health and safety requirements for applicable hazardous substances., • Must be able to demonstrate a high degree of understanding in the cGMP practices., • Demonstrate knowledge of the current good manufacturing practices., • Ability to convey information clearly and concisely to both individuals and groups., • Ability to troubleshoot manufacturing processes, write investigations and complete documentation., • This position requires working with or around hazardous substances and is subject to work restrictions and precautions as set forth in the Safety Data Sheet, provided to all affected employees., • Ability to don personal protective equipment, if necessary., • Able to walk the production floor., • This position requires working with or around hazardous substances and is subject to work restrictions and precautions as set forth in the Safety Data Sheet, provided to all affected employees., • Ability to don personal protective equipment, if necessary., • Able to walk the production floor.

Job DescriptionSolid Rock Recruiting- The #1 Drywall Recruiting Firm in The USA Assistant Project Manager - Commercial Drywall Location: Nyack, NYAbout the Opportunity: Solid Rock Recruiting has partnered with a dynamic commercial drywall contractor seeking an Assistant Project Manager who is ready to grow in the specialty trade contracting space, specifically in commercial drywall operations where your construction management skills will drive project success. This is a full-time, on-site role. Position Overview:Working alongside seasoned Project Managers, you'll support the successful execution of commercial drywall projects while developing expertise in this specialized field.Key Responsibilities:• Assist in managing project documentation, including submittals, RFIs, and change orders • Coordinate with field personnel, suppliers, and other trade partners, • Support budget tracking and cost control measures, • Help maintain project schedules and resource planning, • Process and track material orders and deliveries, • Manage project correspondence and documentation, • Assist with quality control processes and safety complianceRequired Qualifications:, • 2+ years of construction industry experience, • Strong organizational and documentation management skills, • Proficiency in Microsoft Office Suite, • Excellent written and verbal communication abilities, • Detail-oriented with strong problem-solving capabilitiesPreferred Qualifications:, • Experience in commercial drywall projects, • Familiarity with construction management software, • Understanding of construction drawings and specifications, • Experience with submittal and RFI processesWhat We Offer:, • Competitive salary based on experience, • Comprehensive benefits package, • Professional development opportunities, • Mentorship from experienced Project Managers

Job DescriptionJob Description The Jr. Sales & Project Coordinator is responsible for reliable manufacturing coordination. They act as an interface between customers and internal departments. They play an important role both in customer-specific issues and in the supply chain in order to achieve the optimum between meeting customer requirements and economic results for Schreiner Group. The link between our US sales team, and customers throughout the Americas is vital to our stability, and projected growth. Our production facility in Blauvelt, NY acts as the US headquarters, with a dotted line reporting to our German parent company. This position will have direct contact with customers, internal team members, and business partners as well as regular interaction with peers located in at our German headquarters. This role has a career path through Sales & Project Management as dictated by business need. At Schreiner Group, we are grateful for our current stability, and excited for our projected growth in the coming years! Primary Responsibilities • Customer correspondence, • Participation in internal and external customer (on occasion) meetings, • Negotiations as part of day-to-day business (e.g. telephone follow-up on quotations, simple price discussions, negotiations on delivery date postponements), • Case-by-case support during complex price negotiations, • Participation under guidance e.g. in NDAs, Supply Agreements, Quality Agreements, Development Agreements, • Receive simple customer inquiries and prepare quotations with guidance, • Creating orders using existing master data structures; in series business with existing customers: Checking contracts under supervision (e.g. payment terms, incoterms, creditworthiness check), • Independent artwork management, • Independent and error-free order entry and order creation for reprints and new types in the ERP system, taking into account the valid guidelines; independent checking of the order with regard to the valid contracts/agreements; informing the internal/external contacts in the event of deviations after consultation, • Identification/tracking of deviations in post-calculations; invoice release/correction, • Confirmation of delivery dates to customers; review of order confirmation within the framework of valid contracts/agreements; in the event of deviations, use of the regulated escalation process, • Active participation of all types of complaints for assigned customers, • Operate established supply chain service solutions as part of customer support, • Participate in supply chain workshops; participate in supply chain calls with customers, • Perform external customer projects under supervision, • Contribute on a case-by-case basis to sales tools such as Sales Funnel, Key Account Development Plan, Country Management Plan., • Bachelor's degree in business, or related field, • May be supplemented by an associate's degree plus relevant work experience, • Experience supporting a sales team in a manufacturing environment, • Experience as primary point of contact for B2B customer service, • Experience working in SAP and/or CRM systems which feed to SAP, • Participation in ERP implementation, master data transfer/maintenance, and similar, • Experience working in a pharmaceutical manufacturing environment; including supplier relationship, • Experience developing or facilitating training material, supervising staff, or onboarding new team members

Job Description Position: Associate, Quality Assurance (Sampling) Department: Quality Assurance Position Summary The Entry-Level Associate, Quality Assurance supports the sampling activities and shop floor quality operations at the Chestnut Ridge site. Roles and Responsibilities Raw Material Sampler Key Responsibilities: • Cleaning/Approving: Cleaning, approving and preparing the sampling room and utensils for raw material sampling according to established procedures., • Inspection of Materials: Visually inspecting raw materials and packaging components for any damage, defects, or non-conformities before and during sampling., • Sampling: Collecting samples of incoming raw materials and packaging components from various vendors, warehouses or storage locations according to established GMP (Good Manufacturing Practice) and quality control procedures., • Documentation and Labeling: Accurately labeling and documenting samples with all relevant information (e.g., lot number, including sample details, date, time, and any relevant observations) and maintaining thorough records of all sampling activities., • Sample Handling and Delivery: Ensuring samples are stored correctly and securely and maintaining their integrity until they are delivered to the appropriate laboratories for testing (e.g., microbiology, chemistry, packaging)., • Testing: Submitting samples to the laboratory for testing and analysis, often coordinating with lab personnel., • Record Keeping: Maintaining detailed records of all sampling activities, including test results and any deviations or discrepancies., • Communication: Effectively communicating with warehouse, procurement, and laboratory teams to coordinate sampling schedules, report discrepancies, and ensure a smooth workflow., • Inventory Management: Assisting with inventory tracking and the organization of raw materials in storage areas., • Safety Compliance: Following all safety protocols and procedures to prevent contamination and ensure a safe working environment., • Maintaining a Clean Work Environment: Ensuring the cleanliness and hygiene of sampling areas and equipment, especially in controlled environments., • Calibration and Maintenance: Calibrating or verifying the calibration of sampling instruments and maintaining supplies as needed., • Troubleshooting and Problem-Solving: Identifying and reporting any quality variances or issues with incoming materials and assisting in investigations of raw material complaints., • Required Education: High school or Bachelor’s degree in Pharmaceutical Sciences or a related field., • Experience: 1–3 years in a pharmaceutical or regulated industry (internships or co-op experience acceptable)., • On-site role at Pearl River, NY., • Standard work hours: 7 AM to 4 PM., • No travel required., • Able to lift 50 lbs.

Job Description Title: Manufacturing Technician I (Manufacturing/Quality) Location: Pearl River, NY Duration: 12 Months Shift: 1st Shift (7am - 3:30pm: Mon-Fri) (OT and Holidays as needed) Description: This position is responsible for ensuring all sampling are collected within the required frequency. Sampling includes environmental monitoring and utilities sampling in cGMP areas. The position is also responsible for preparing all the material needed for the manufacturing process. Preparation includes Glassware washing, Transfer Assembly preparation and Autoclaving. Responsibilities: " Execute standard operating procedures (SOPs) in routine/non-routine sampling process in areas of the cGMP manufacturing facility. " Perform aseptic sampling (Environmental monitoring sampling, WFI (water injection), PUW (Purified Water) and Clean Steam Sampling) " Prepare material for manufacturing process (Glassware washing, Transfer Assembly preparation and, Autoclaving) " Perform routine cleaning of the cGMP facility. " Interact with other departmental personnel to assist in resolving manufacturing quality issues. " Maintain records and documentation in accordance with a cGMP environment " Work a flexible work schedule, weekends and holidays as required. " Follows instructions on notification of deviations as they occur and provides information during investigations. " Must be able to support additional manufacturing activities as needed. Requisite Education/Skills: " Education: High School degree with at least two years of experience or training in a cGMP manufacturing environment " Aseptic technique sampling experience in GMP environment is preferred " Strong content knowledge in cGMP/regulatory compliance. " English fluent, both written and spoken " Good communication and social skills #TB_PH #ZRCompany DescriptionFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CAFounded in 2002 by three former Monster.com executives; TalentBurst is an award-winning full-service Staffing Firm working directly with Fortune 500 companies in the US and Canada. We specialize in Contract and Contract to Permanent roles across many industries and have direct/contractual relationships with all our clients. Please visit our website or come meet us at our offices in Natick, MA, Miami, FL, Christiansburg, VA, Vineland, NJ, Houston, TX & downtown San Francisco, CA

Job Description POSITION SUMMARY: (Essential Functions of Position) The Behavior Intervention Specialist (BIS) provides clinical oversight, technical assistance, and skill development to program staff regarding all aspects of behavior support services. This position works collaboratively with staff, program supervisors, families, and other support providers in the delivery of behavioral services to individuals supported across assigned programs in residential and / or day services. The Behavior Intervention Specialist has a flexible schedule to meet the needs of the agency and may need to work weekends as needed. The Behavior Intervention Specialist will also be available to answer phone calls in case of an emergency after hours as needed. They will also provide oversight to the Behavior Therapy Technician in relation to behavioral components of the job. POSITION QUALIFICATIONS: Minimum Requirements: Level 1: A. (1) Master’s degree from a program in a clinical or treatment field of psychology, social work, school psychology, or applied psychology as it relates to human development and clinical interventions, and documented training in assessment techniques and behavior support plan development; or (2) a national board certification in behavior analysis (BCBA) or a NYS license as a Behavior Analyst (LBA); or (3) a New York State license in mental health counseling. and B. A least three years of experience: (1) working directly with individuals with developmental disabilities, including the development, implementation, and monitoring of behavior support plans; or (2) providing supervision and training to others in the implementation of behavior support plans; or C. Employed as a Level 2 BIS, at the master’s degree level, for three years. Level 2: A. BCBA or an LBA and a master’s degree in: (1) behavior analysis; or (2) a field closely related to clinical or community psychology that is approved by OPWDD]; or B. (1) have either: (i) a master’s degree in a clinical or treatment field of psychology, social work, school psychology, applied psychology as it relates to human development and clinical intervention, or a related human services field; or (ii) a New York State license in mental health counseling; and (2) have or obtain OPWDD-approved specialized training or experience in functional assessment techniques and behavior support plan development; or C. (1) a bachelor’s degree in a human services field; and (2) provided behavioral services for an agency in the OPWDD system as of, and continuously since, December 31, 2012; and (3) either: (i) is actively working toward a master’s degree in an applied area of psychology, social work, or special education; or (ii) completes at least one graduate-level course in an applied health service area of applied psychology, social work, or special education each year. (iii) The qualifying master’s degrees referenced in this paragraph, including any degree obtained through an online educational or distance learning program, must have been awarded by a regionally accredited college or university, or one recognized by the NYS Education Department as following acceptable educational practices. If the master’s degree was awarded by an educational institution outside the United States and its territories, the party must provide independent verification of equivalency from one of the approved entities used by the NYS Department of Civil Service for educational equivalency reviews. Knowledge/Skills/Abilities (KSAs): Knowledge of: -Principles and procedures of Applied Behavioral Analysis (ABA) -Principles of Positive Behavior Support preferable -Principles of behavior management and Functional Behavioral Assessments (FBA’s) Skills and Abilities to: • Communicate effectively orally and in writing with a variety of individuals representing diverse culture and backgrounds. • Establish interpersonal relationships by encouraging individuals’ participation in center-based and community inclusion activities. • Supervise and train subordinate personnel., • Interact with parents, guardians and other professionals as needed regarding individual plans and progress meeting information. Required Certification/Registration: FBA (Functional Behavioral Assessment) certified or attained within the first month of employment. Certified as or pursuing BCaBA or BCBA preferred. Physical Requirements: Postural -Walking and standing frequently -Sitting occasionally in awkward positions while assisting with feeding -Reaching forward continuously and reaching overhead occasionally to assist individuals and perform other tasks -Squatting/ half-kneel occasionally to remove / reinstall footrests on wheelchairs, assist with low level ADLs, and secure wheelchairs within vehicles. -Standing bend forward occasionally to assist with bed care/mat table activities -Must be able to kneel and complete compressions to perform CPR if needed Dexterity -Steady firm grip up to 50 pounds when using a transfer belt to assist with ambulation -Moderate level of hand coordination, reaching frequently, for assisting with ADLs -Finger press of medication out of blister packs -Finger dexterity to manipulate keyboard and remote-control devices Agility-Material Handling Lift up to 50 pounds and /or pull of 50 pounds to transfer individual Push various mechanical lifts and chairs with an initial force up to 27 pounds and sustained forced up 15 pounds variable distances and floor surfaces in the home, day program and community. Working Conditions: May be exposed to a few slip and trip hazards on the floor, odors, inclement weather, medical wastes, illness and unpredictable work conditions. May be required to work in areas within the agency, community and offsite locations that may or may not be heated or cooled. Corporate Compliance: Employees must comply with agency or governing body rules, regulations and policies and procedures. Any employee who witnesses or learns about a violation or possible violation of agency or governing body rules, regulations or policies and procedures is required to immediately report this to his/her supervisor or the agency’s corporate compliance officer. TO APPLY: Please respond to this posting or visit . There is never a fee to apply. The Arc Rockland is an Equal Opportunity Employer. The Arc Rockland strives to create and maintain a work environment in which people are treated with dignity, decency, and respect, providing everyone with an equal opportunity to thrive. We are committed to building a diverse and inclusive workplace that values the unique perspectives and contributions of all of our employees – a workplace where every employee is able to bring their whole self to work.

Job Description Who We Are iLABS is an innovation-focused, full service, global beauty company with proven track record for award winning formulas and product development. The art and science of innovation is in our DNA. Through our worldwide network of talented chemists, scientists and creatives, we bring authentic innovation and cutting-edge technology to every product we design. The Way We Work Whether you’re an established brand or an indie start-up, our team of beauty industry professionals nurture your project through each phase of development, from concept to finished goods. We take the time to understand your goals through access to cutting-edge technologies, raw materials, sustainable materials and the latest marketing analysis. Our dedicated team guides your vision, ensuring your product takes center stage in a crowded market. Job Summary We are seeking a Chemist II to join our R&D team, focused on creating personal care, skincare, hair care, and color cosmetics. They would develop and test new products, solve technical issues, and ensure they meet industry standards. They will lead and mentor junior chemists, help scale products for manufacturing, manage lab documentation, and support project management. Additionally, they will contribute to improving lab processes and managing raw material data. Responsibilities • Formulate personal care, skin care, hair care and/or color products, • Perform necessary research, test products and troubleshoot, • Supervise and mentor junior level chemists, • Adhere to a cGMP environment, document and follow lab procedures with attention to detail, • Attend cosmetic seminars and meetings, • Attend relevant internal meetings and provide reports, • Attend scale-up and manufacturing, • Assist R&D leaders with various tasks, including the following:, • Project management support, • Customer calls support, • Lab procedure and specifications, • Raw material data management, • 6+ years of previous makeup, OTC and/or skincare formulation experience, • Bachelor’s degree in Chemistry, Biochemistry, Chemical Engineering or related field, • Master’s degree in Cosmetic Science or related field, preferred, • Ability to supervise and mentor chemists, • Extensive knowledge of formulation science, • Strong time and project management skills, • Knowledge of rules and regulations (FDA, CTFA, PCPC) for formulation, • Knowledge of current Good Manufacturing Practices (cGMP), • Knowledge of and ability to assist in scale-up and manufacturing process, • Strong problem-solving skills, • Strong communication skills, both written and verbal, • Comprehensive Health Benefits package (Medical, Dental, Vision, Life, AD&D), • Competitive 401(k) match with immediate vesting, • Paid time off (Vacation, Sick, Holiday, Summer Fridays), • Monthly birthday celebrations + other fun activities!, • Daily subsidized meals iLABS (Innovation Labs) Inc. is an equal opportunity employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other characteristic protected by federal, state or local laws. All employment is decided on the basis of qualifications, merit, and business need.

Job Description JOB SUMMARY The Chemist II, under minimal supervision, performs QC laboratory chemical analyses of raw materials, in-process materials, stability and finished products, and testing to support process validation. Has demonstrated competence in conducting all types of physical and chemical analyses (including complex analyses) using all equipment. Detects, conducts, and reports on OOS/OOT/NOE and other investigations. Learns and stays current with regulatory guidance and compendia relevant to laboratories and pharmaceutical manufacturing. Participates in troubleshooting analyses and instrumentation. Trains less senior staff. All incumbents are responsible for following applicable Division & Company policies and procedures. KEY ACCOUNTABILITIES Analysis & Testing • Conducts laboratory analyses according to approved test methods: finished product testing, stability testing, raw material testing, cleaning verification testing and manufacturing in-process testing. Typical activities may include buffer/solution preparation, standard preparation and operating analytical instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc., • Uses laboratory software for analyses, • Reviews and approves laboratory test data and documentation for completeness and compliance, • Is alert to and detects abnormalities during performances of tests and reviews. Elevates abnormalities to Supervisor, • Provides general laboratory support such as routine instrument cleaning/preventative maintenance/calibration, sample receiving, chemical inventory, document filing and housekeeping, • Cleans lab working surfaces and dispose of any excess chemicals, solutions, solvents, etc. in the special waste containers for each class of waste chemicals, • Detects, conducts and reports on OOS/OOT/NOE and other investigations, • Elevates questionable sample results, OOS, and aberrant results immediately to Supervisor and recommends a course of action, • Maintains assigned training records current and in-compliance, • Performs assigned work in a timely and safe manner conforming to regulatory, company and compendiaI requirements within pharmaceutical manufacturing setting, • Document accurately data generated in notebooks/worksheets/LIMS in compliance with SOPs, • Follows EH&S procedures to ensure a safe work environment, • Follows all applicable safety and standards guidelines, such as SOPs, cGMP, DEA regulations good documentation practice and/or MSDS QUALIFICATIONS Education & Experience • Bachelor of Science Degree in chemistry, chemical engineering or related field with 4+ years’ relevant analytical laboratory experience OR, • Has strong knowledge of laboratory software and has expanded knowledge of chromatographic software (e.g. Waters Empower, Agilent ChemStation and Sotax WinSotax), using custom fields, custom calculations and custom reports, • Full proficiency with various laboratory techniques/instruments: HPLC, UV-Vis, FT-IR, GC and dissolution tester, melting point apparatus, viscometer, Karl Fischer titrator, pH meter, analytical balance, etc., • Thorough knowledge of applicable safety and standards guidelines, such as SOP, cGMP, GLP, DEA regulations and/or MSDS, • Has demonstrated competence in conducting chemical analyses, • Strong knowledge of wet chemistry techniques, • Ability to critically review and analyze data, interpret information, and draw conclusions from relevant or missing information, reporting to management, • Ability to display and analyze data in a logical manner, • Ability to critically review, analyze data, interpret information, and draw conclusions from relevant or missing information, • Ability to display and analyze data in a logical manner, • Strong verbal and written communication skills as well as good computer skills, • Strong attention to details and accurate record keeping, • Establish and maintain cooperative working relationships with others, • Solid organizational skills, • Ability to coach less senior staff and develop laboratory skills and ability, • Ability to take initiative, set priorities and follow through on assignments

Job Description The Press Operator is responsible for the safe and efficient operation of a press while adhering to customer specification, quality requirements, company standards, and guideline and safety standards. This position is responsible for the overall completion of the job assigned to the Press Operator 2nd shift 4:20pm - 2:40am Monday - Thursday. Mandatory over-time on Fridays. The Screen Printing Operator plays a crucial role in the production process within the wholesale trade industry, specifically focusing on the creation of high-quality printed materials. This position involves operating and maintaining screen printing equipment to ensure that all products meet the company's quality standards and client specifications. The operator will be responsible for setting up screens, mixing inks, and executing print runs efficiently while adhering to safety protocols. Attention to detail is essential, as the operator will inspect finished products for accuracy and quality before they are shipped to clients. Ultimately, the success of this role contributes to the overall satisfaction of customers and the reputation of the company in the market. • Inspections of printed material to ensure the correctness in all areas of color, registration, stock, and all other customer specifications., • Adjusting and maintaining registration, color, perforations, and other customer specific printing specifications., • Observes the press operations to detect any machine or equipment malfunctions and moves to correct the issues., • Makes adjustments to all press machine parts and equipment: feeders, grippers, guides, feed wheels, cameras, and other machines parts, using proper equipment., • Conducts a visual inspection prior to printing of all material stock and ink for defects or noncompliance to job specifications., • Carries out the final inspection to ensure the material, ink, plates or screens, cylinder/rollers, tension, and all other necessary customer specifications are correct prior to the start of the running the job., • Review and interpret job specifications and work order instructions, delegates or carries out directions as needed., • Ensures all job-related data (time and material) are entered into the ERP system (DISO)., • Ensures all unused material goes back to the designated area after each job is finished running., • Knowledge of cGMP, ISO and Lean Manufacturing is a plus. Reading, analyzing, and interpreting technical procedures, manuals and manufacturing documents including the system of Graphic specification/Graphic identical/Articles., • Experience with inks and material., • High School Diploma or General Equivalent Degree (GED), • Experience with handling and proper caring of die cutting tools., • Experience with machine set-up, • Experience with UV and water-based inks preferred., • Experience working with vision systems preferred., • Working knowledge of quality procedures in the pharmaceutical industry preferred., • Ability to lift 50 pounds., • Standing for long periods of time., • Work activity requires repetitive bending, reaching, walking, stooping, and crouching, lifting, and climbing.

Job Description General Contractor specializing in Multifamily rehabs/renovations looking for an Estimator with experience working on large-scale Multifamily Construction projects. Primary Responsibilities: • Responsible for all estimating and budget development to include:, • Unit quantity estimates and pricing of the work for entire project, • Soliciting vendors (RFP’s) and subcontractors for proposals for the construction work, • Reviewing plans to develop and clarify scope of work, • Reviewing and comparing the scope of work and pricing for the vendor proposals, • Negotiating subcontractor agreements, • Reviewing & negotiating change order requests, • Preparing monthly construction draw requests, • Developing historical cost data base, • Additional responsibilities to include:, • Complete material and labor unit quantity takeoffs using corporate guidelines, • Analyze quantity takeoffs and unit costs for all trades including site work and vertical construction., • Understand unit costing and quantity estimating of construction materials., • Assist in the feasibility, value engineering, bidding, and contracting process., • Assist the Senior Project Manager in creating contractor bid packages for the projects., • Assist in the negotiations of pricing and quantities with multiple contractors to obtain the best pricing for the highest quality materials and services., • Conduct unit costs analysis., • Develop a unit cost data base. Skills/Qualifications: • Bachelor's Degree in construction management, architecture or engineering preferred, but not required, • Highly organized with strict attention to detail, • Ability to multitask efficiently, • Ability to prioritize effectively, • Computer proficiency, experience with Timberline a plus, • Good judgement with the ability to make timely and sound decisions, • Ability to work independently and as a member of various teams and committees, • Ability to process requests quickly and efficiently, • Ability to provide excellent customer service, • Ability to work efficiently and accurately in a fast-paced environment, • Strong work ethic, self-motivated and self-starter, • Deadline driven ETC Companies, LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Company Description

Job Description Inrad Optics, a Luxium Solutions company, is seeking self-motivated individuals to add to our growing team of Optical Technicians. In this position, you will set up, operate, and maintain various spindle polishing machines to perform precision beveling, grinding, lapping and polishing of optical materials to close tolerances. If you are focused and enjoy creating things, then you may be an excellent candidate for one of our career building positions manufacturing precision optics for medical, defense and space applications. Requirements Key responsibilities • Hand grind and spindle grind optical glass, quartz and infrared optical material and ensure conformity to work order traveler and blueprint specifications., • Set up and operate optical spindle machines to polish various optical components, including windows, prisms, and lenses. Typical materials consist of optical glass, quartz, zinc selenide, silicon and germanium., • Ensure conformity to work order traveler and blueprint specifications., • Maintain and clean all machinery and follow preventive maintenance schedules., • Minimum 2 years of related optical shop experience in grinding and polishing of optical materials using both hand and mechanical methods., • High school degree or equivalent, • Knowledge of measuring optical dimensions and angles using various inspection equipment, including autocollimator, micrometer, dial and or digital indicator, caliper and Zygo interferometer., • Read, understand and follow optical blueprints., • Attention to detail – ability to accomplish tasks and processes accurately and completely., • Problem solving - ability to identify problems, determine possible solutions, and actively work to resolve the issues., • Able to lift 25 pounds., • Must be a U.S. Citizen or Permanent Resident as we are a United States controlled information facility, • Monday-Friday Schedule, • Paid Time Off available on day one (pro-rated for new hires), • Medical/Dental/Vision/Prescriptions available on day one, • Employer Paid Life Insurance and AD&D, • Short/Long Term Disability, • HSA/FSA, • EAP, • 401(k) & company match

Job Description Job Description Overview The role of the Flavor Sample Laboratory Technician is to assist in the completion of profiles and support senior flavor chemists in preparing flavor compounds. Education and Skills • Education Requirement: College Degree or Degree in process, • One(1) year handling chemicals and other raw materials(can be achieved by working under a senior chemical compounder or vocational training), • Ability to follow directions, • Good mechanical aptitude, • Good verbal communication, • Prepare flavor compounds by weighing accurate formula, • Basic knowledge of GMPs/HACCP/Food Safety practices, • Ability to convert measurements standard to metric units or vice versa., • Perform daily functions of processing, pre-weigh and sanitization., • Recognize and used PPE need to perform daily job functions., • Help maintain a fully stocked, orderly and clean workstation for efficient compounding, • Use INFORM, SAR Management, Batch Metrics Portal, and CRM to import/export and finalize formulas under Senior Flavor Chemists direction., • Use of inventory system to make sure flavor raw materials are up to date., • Perform other lab and project tasks as directed by the Flavor Chemists and Lab Supervisors, • Keep an organized collection of flavor compounds., • Be able to help out with overflow work when Flavor work is slow., • Processes compounds, emulsions, and washed extracts by mixing, homogenizing, filtering, heating, chilling, and sampling and verify all necessary raw materials according to batch records and Standard Operating Procedures (SOPs)., • Operate lab equipment including blenders and sieves according to Standard Operating Procedures (SOPs)., • Process flavor compounds according to formulas and techniques to ensure product quality., • Performs in-process quality testing to ensure customer specifications are met and manufactures products in a safe and timely manner., • Compounds finished products as specified on the batch record., • Following OSHA guidelines for handling hazardous materials, • Follow EPA standards on hazardous and non-hazardous waste management., • Spec development backup, • Preparing bulk inventory samples for labs, • Maintain raw material inventory for the labs, • Maintain flavor library Physical Demands/Dexterity • Ability to multi-task and work in a fast-paced environment under minimal supervision., • Ability prioritize and work well in a team and be a team player., • Ability to wear a full-face respirator., • Ability to stand for long periods of time, • Ability to stand, walk, reach, bend, lift, push, pull, grasp, and crouch for 8 hours per day., • Basic math, reading and computer skills. Lucta is committed to an inclusive, diverse and equitable workplace, and is further committed to providing equal employment opportunities regardless of any protected characteristic including: race, color, genetic information, creed, national origin, religion, sex, affectional or sexual orientation, gender identity or expression, lawful alien status, ancestry, age, marital status, protected veteran status or disability. Hiring decisions are based upon Lucta’s operating needs, and applicant merit including, but not limited to, qualifications, experience, ability, availability, cooperation, and job performance. In compliance with pay transparency requirements, the salary range for this role in New Jersey is $50,000.00 This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, and paid vacation, sick and holidays. Our work environment embraces our people as we enjoy quarterly employee events that celebrates our workplace culture

Job DescriptionDescription: The assembly operator oversees and operates machines necessary to swage cable, to perform cable end treatments, to swage fittings, to cut or trim cable, to grind assemblies to length and to assemble cable components. Counts packages and labels completed cable assemblies. This position is responsible to maintain acceptable production outputs and quality of wire/cable assembly. Duties and Responsibilities: • Takes and follows directions from both, operational performance and job requirements from Supervisors, Facilitators on a job by job basis., • Clear area of previous job materials., • Completes job cards, routers and job documentation as required., • Operates lathes, welders, presses, grinders, cable cutters, swagers, packaging equipment and other equipment necessary to manufacture cable assemblies., • Maintains material traceability by completing records of materials usage for each job., • Monitors and performs visual and tactile inspection of assembled parts., • Performs proof-loading of assembled parts., • Gathers samples for start-up and in-process testing and inspection., • Packages and labels processed material according to job card instructions., • Reports part or process quality issues to their supervisor or any quality personnel., • Any other duties as assigned by supervisor. Requirements: • Prior experience is preferred but not required., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g. standing, sitting, walking throughout the facility and stairs. Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), a typical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job Description WHO WE ARE: VEG is revolutionizing the Veterinary Emergency experience. Our mission is to help people and their pets when they need it most. Emergency is our middle name. It's all we do, so we do it best. The way that Veterinary Emergency was meant to be is now a reality. We are reimagining every part of the process with a unique customer experience, a highly trained emergency focused staff, and on-site advanced diagnostic tools and treatments. Our patients see a doctor right away and clients can stay with their pet through every step of the process. We literally tear down old walls to unite customers with their VEGgie heroes and to see the amazing work they do. We liberate our employees to be all they can be. We brush away systems that don't make sense. We crush old rules. We make new rules. CULTURE AT VEG: At VEG, we want people and their pets to feel safe, secure, and valued. We aim for our employees to feel the same way. We lead with our values of togetherness, openness, heroic helping, and meaningful moments. We are actively evolving to ensure that VEG is not only the best and brightest place to come work today, but also a leader in how we think about talent and development so that our employees grow along with us. For our customers and their pets, we find a way to say, "Yes". We do the same for our employees. FOCUS: This role focuses on ultrasound support for VEG hospitals and training facilities. You will work closely with emergency doctors to provide same-day ultrasound scans for pets when they need it most. You will also assist in coordinating education opportunities and overall ultrasound training for your home and regional hospitals. You will inspire and motivate your fellow VEGgies to grow their ultrasound skills. WHO WE NEED: We are looking for an individual that is passionate and motivated. Someone that values learning and is an honest, respectful team player. They love what they do. They love working with animals and people. They are comfortable adapting to new scenarios, willing to learn new techniques, and think outside the box. Someone with excellent interpersonal skills that is happy to pitch in wherever and whenever they are needed, and does so with a positive attitude. They demonstrate the ability to accomplish assigned tasks and know when to ask for assistance. They display excellent communication skills to their peers, customers, and team. WHAT YOU CAN EXPECT TO DO: • Perform ultrasound studies and facilitate ultrasound training at your home hospital and regional hospitals, • Maintain good relationships with and accept feedback from teleconsultation radiologists reading your studies (e.g., Antech, SonoPath, IDEXX, VetsChoice, etc.), • Ensure all training content and activities are in alignment with VEG culture, mission, and vision, and represent accurate, up-to-date sonographic techniques, • Track doctor and nursing team skills with a VEG Ultrasound Certificate checklist, • Engage in self-reflection and program evaluation practices to modify and enhance VEG's ultrasound training programs, • Regularly meet with the medical directors, VNDCs, and director of radiology education to discuss program development, training objectives, and additional needs, • Regularly meet with hospital manager and medical director to discuss implementation of new training protocols, training schedules, hospital training needs, and interpersonal concerns, • Coordinate weekly schedule with hospital manager and medical director to work on-the-floor shifts and dedicate time to training responsibilities, • May assist in developing ultrasound curriculum material, as needed, such as PowerPoints, videos, simulations, and assessments to be implemented across the doctor and nursing team training programs, • May have the opportunity to provide educational demonstrations for doctors and nurses at other VEGs including ultrasound topics such as abdominal, thoracic, cardiac, cervical, and musculoskeletal studies OUR IDEAL CANDIDATE WILL HAVE: • Full-time employment and benefits with VEG, • Patience to train and develop doctors, nurses, and fellow sonographers, • Previous experience in a training role, • 3+ years veterinary ultrasound experience, • Credentials as a veterinary technician (LVT/CVT/RVT/LVMT), diagnostic medical sonographer (RDMS), AND/OR equivalent experience (e.g., sonographer course certificates), • Comfort mentoring others and giving/receiving feedback from colleagues, • A positive and friendly personality, • The ability to adapt to changing environments, • Embraced The VEG Way and be excited to share your perspective and experience, • The ability to recognize and celebrate other VEGgies' success when they see it, • Eagerness to continue to grow as a sonographer through developing personal skills and knowledge, • Desire to travel to regional hospitals and off-site training facilities (e.g., Fort Collins, CO, Las Vegas, NV, White Plains, NY etc.) WHY YOU SHOULD CHOOSE US Because emergency is all we do, so we do it best! We also offer: • Industry-leading‌ ‌compensation‌: pay range is $31-$50 and based on experience, • Something new every day - you'll never be bored in emergency medicine, • We build our hospitals from scratch. You'll be using all of the latest equipment and technology., • Generous employee pet discount, • Referral rewards - tell your friends why they should come work for VEG too!, • Health‌, Vision, and Dental ‌Insurance‌ ‌ ‌, • 401K‌ ‌w/‌ ‌company‌ ‌match‌, • Paid‌ ‌parental‌ ‌leave‌ ‌-‌ ‌10‌ ‌weeks‌ ‌of‌ ‌paid‌ ‌leave‌ ‌at‌ ‌100%‌ ‌of‌ ‌regular‌ ‌salary‌ ‌, • Unlimited‌ ‌Continuing Education opportunities - we want to help you grow in your career!, • Flexible‌ ‌work‌ ‌schedules‌ ‌for‌ ‌a‌ ‌true‌ ‌work-life‌ ‌balance‌ ‌ ‌, • Growth‌ and relocation ‌potential‌ ‌ ‌, • Groceries‌ sent‌ ‌to the hospitals weekly for the staff to enjoy,‌ ‌monthly‌ ‌and‌ ‌quarterly‌ ‌contests,‌ ‌quarterly‌ ‌hospital‌ ‌outings,‌ company-wide retreats,‌ ‌etc!‌ ‌, • Lastly, because while our work is serious, we believe that it should also be fun! VEG celebrates diversity and is committed to creating an inclusive workplace that represents a variety of backgrounds, perspectives, and skills. You've found the equal opportunity employer you are looking for. We can't wait to meet you!

Job DescriptionDescription: The Design Engineer creates, develops and tests products such as machines, tools and sensors. They solve problems by applying the principles of physics, chemistry and mechanics to the real world. They also collect data on prototype performance and supervise the manufacturing process for their designs. Duties and Responsibilities • Study plans for upcoming generation of engineering models and develop strategies for improving upon current models., • Design equipment using CAD and consults with engineering and manufacturing teammates to ensure that designs are feasible., • Develop and build prototypes and run tests to measure their level of function., • Record, evaluate, and report testing data, altering designs as necessary to bring them to safety, performance and efficiency standards., • Consult with fabrication teams during product manufacturing, advising them on design specifications and providing physical assistance when required., • Calculate cost estimates for final product designs, and release reports to supervisors, incorporating costs of labor, material, delivery and overhead., • Attend team meetings to provide progress reports, obtain updates on colleagues’ progress, strategize on steps for following week and acquire information about projected emerging product lines., • Analyzes and interprets data and provides technical advice., • Other assignments as requested. Requirements: • Requires a multidisciplined background with a focus on mechanical engineering and production operations., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Investigative mind inclined toward developing practical solutions to real-world problems., • A proven understanding of part and Quality workmanship., • Communication skills - must have good listening skills in addition to excellent verbal and written communication abilities., • Ability to analyze data and make recommendations., • Strong interpersonal skills., • Bachelor’s degree in Mechanical Engineering., • Minimum of 3+ years’ experience in a manufacturing environment., • Experience/knowledge of 3D CAD. Solidworks a plus., • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles., • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • Ability to lift or move items weighing up to 32lbs (females) and 50lbs (males) preferred. Pay rate: $80,000 - $100,000/year Benefits: Eligible after 1st day: • Paid holidays, • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • 401(k) with Employer Match, • Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at .

Job Description Who We Are EarthCam is the global leader in providing webcam content, technology and services. Founded in 1996, EarthCam provides live-streaming video, time-lapse construction cameras, and Software-as-a-Service (SaaS) for AI-powered visual asset management, leveraged through our intuitive Control Center 9 dashboard which integrates with leading project management software. EarthCam leads the industry with the highest resolution imagery available, to empower building information modelling (BIM) and Virtual Design Construction (VDC) teams with actionable visual data. EarthCam's innovations include the world’s first outdoor gigapixel panorama camera system, and the first ever 5G construction camera. EarthCam has documented over a trillion dollars of construction projects around the world. The company is headquartered on a 10-acre campus in northern New Jersey. We are seeking a detail oriented and analytical Purchasing Coordinator to join our growing team. Responsibilities • Review and process material requisitions, • Once authorized create purchase orders and distribute to vendors, • Communicate via phone & email with the vendors and internal customers, • Administer subcontractor processes and put work out to bid, • Negotiate contract rates for external services and purchasing of materials, • Contract all 3rd party technicians outside of Field Nation platform, • Control delivery of various items required for construction site installation processes, • Negotiate national deals for products and services we purchase, • Create and manage purchase orders and documents related to 3rd party service vendors, • Coordinate the process of purchase order receipt, invoice application for both MYISIS and SAGE PO, • Assist with ad hoc assignments as assigned by supervisor Requirements Who YOU are • Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers, • Able to work under pressure and meet deadlines, while maintaining a positive attitude, • Ability to maintain regular, punctual attendance on site Requirements • Bachelor's degree in accounting, business administration or related field is a plus, • Strong Excel skills, • Organizational skills, • Proven ability to carry out purchasing functions Benefits What We Offer: The EarthCam package includes excellent salaries, bonuses, benefits, and constant opportunities for development – designed to create an entrepreneurial, invigorating and satisfying environment. Our benefits include: • Health insurance (Single coverage 100% paid for by company), • Dental and vision insurance, • 401K Plan (with aggressive company matching), • Paid time off, plus paid holidays, • Regular free breakfasts, lunches and snacks, • Bicycles to ride around campus, • Team BBQs and annual company Olympics Recruitment Fraud Disclaimer EarthCam is committed to maintaining a transparent and secure recruitment process. EarthCam communicates with candidates exclusively using EarthCam email addresses and extends job offers solely by telephone. For more information about the EarthCam recruitment process and avoiding fraudulent job offers, please click here.

Job DescriptionWe are 613 Originals, an industry leading Digital and Screen Printed Transfer manufacturer based in NJ. We are looking for a self motivated team player who is technically precise and has excellent organizational skills. You will be working in a fast-paced work environment that requires you to safely operate and perform daily maintenance on multiple Direct to Film Printers.Duties will include processing orders and organizing artwork and materials for accurate and efficient printing using a combination of our web-based Order management tool and local software. Employees will have to add ink, change print film substrate, and make sure that system parts remain clean and free from obstructions.Maintenance will be performed multiple times per day to maintain optimum print quality.You will be responsible with maintaining precise quality control over the printed product during every step of the production process.You may be required to finish (cut, clean, inspect and bag) the final product before shipment.Cut: create individual parts out of the roll substrate.Clean: make sure all loose material is off of the final printed product prior to shipment preparation.Inspect: Verify all prints are perfect with no blemishes or missing adhesive as well as make sure all orders have the correct number of parts.Bag: Insert final orders into individual bags with order and decoration information enclosed for final shipment preparation.Other duties may arise as the needs dictate. #hc211413

Job Description Job Title: Sales support/Logistics coordinator (貿易事務) Overview: We are seeking to hire a full-time employee for a Sales support/Logistics coordinator (貿易事務) position. This role involves conducting sales support and logistics duties for inorganic chemicals raw material procurement and manufacture. The position requires preparing documentation for international and domestic shipments and coordinating shipping schedules to meet customer requirements, maximize customer service, and economic efficiency. Responsibilities: * Conduct sales support and logistics duties for inorganic chemicals raw material procurement and manufacture. * Prepare documentation for international and domestic shipments. * Coordinate shipping schedules to meet customer requirements. * Maximize customer service. * Maximize economic efficiency. Required Skills: * Native level English and Japanese skills are required, including speaking, reading, and writing. * Experience in international logistics is appreciated but not a requirement. * Must be proactive, detail-oriented, and organized. * Must have good communication skills. * Must be able to work independently. Work Conditions: * This is a full-time position. * Standard company hours are 9 AM to 5 PM, Monday to Friday. * Employees are expected to work beyond these hours if the situation requires, due to customers and suppliers being in Japan and China. * Remote or hybrid work is not allowed. * If a candidate has issues with commuting due to a lack of transportation, the firm can provide a 0% interest loan to purchase a car for commuting. Compensation: * Annual Wage: $45,000 - $60,000 Bonus: $5,000 per year (paid once a year).

Home Depot - 2024 PALISADES CTR DR [Retail Associate / Team Member] As a Freight/Receiving Associate at Home Depot, you'll: Ensure the store is stocked and ready for business every day; Load and unload trucks, move material from the receiving area throughout the store; Operate forklifts and perform

Job Description Job Title Warehouse Operator (Full Time) About Porcelanosa Porcelanosa is firmly positioned at the forefront of the Spanish and international markets thanks not only to our solid values of innovation and quality, but also the trust placed in our large team, made up of almost 5000 skilled professionals, and our commitment to the environment and stakeholders. Porcelanosa products are designed with people in mind, intended to make their lives better and feature the finest state-of-the-art innovations. Boasting over 45 years of experience, Porcelanosa is present in more than 150 countries around the world. Our success is based on a unique business model, built on a solid corporate strategy. Why Work for Porcelanosa? At Porcelanosa, precision, reliability, and excellence are at the core of everything we do—including our distribution operations. As a Warehouse Operator, you’ll play a key role in managing the movement and storage of goods to ensure accurate inventory control, efficient order fulfillment, and smooth warehouse operations. If you’re detail-oriented, organized, and eager to grow your career in a fast-paced, collaborative environment, this role offers the perfect opportunity. Join us and become part of a mission-driven team that values integrity, innovation, and continuous improvement. What We Offer • Competitive Compensation – Base salary plus commission opportunities, • 100% 401K match up to 4%, • 3-tier medical insurance, • 2-tier dental insurance, • Vision insurance, • Health Savings Account, • Flexible Spending Accounts, • Short Term and Long-Term Disability, • Employer-paid life insurance, • Voluntary Employee, Spouse and Child Life Insurance, • Critical Illness, Hospital Indemnity and Accident Insurance, • $3,000 Tuition Reimbursement, • Paid Time Off (PTO) Key Responsibilities • Use forklift to load, unload, move and stack products., • Receives, unpacks, packs, and ships materials and products., • Counts and checks items and prepares reports as necessary., • Operates forklift or similar material handling equipment., • Unloads inbound shipments from trailers and loads outbound shipments on trailers., • Loads outbound shipments on local delivery trucks according to delivery route or on customers’ trucks., • Stacks and takes down pallets in storage areas., • Moves, stores, organizes and reorganizes a variety of material and products as directed., • Use hands, hand trucks, pallet jacks or similar non-powered equipment to move materials., • Reports inventory discrepancies, stocks shortages, and incomplete orders., • Prepares, packs, and labels for products for shipment using protective wrapping, boxes, pallets, and crates., • Identifies fragile material or poorly packaged material and may construct non-standard packing or reinforcing to ensure products protection from damage., • Verifies and double checks picked product against packing slip to ensure item and quantity accuracy and inclusion of all items., • Applies shipping labels, bills-of-lading, and packing lists., • Maintains and organizes warehouse as directed, • Participate and assist in the physical counts of inventory as required., • Other duties as assigned. What You Bring to the Team • Requires at least 3 months of relevant experience., • Forklift operation certification preferred., • Valid driver’s license., • Basic PC skills for inputting and processing shipments and entering pulled order data into inventory/order processing system., • Must adhere to good safety practices and rules and exhibit common sense., • Requires ability to read and write English at a basic level., • Experience with various types of equipment Commitment to Inclusion Porcelanosa provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. At Porcelanosa, we believe in a skills-first approach to recruitment and employment. This means focusing on what you can do and how you can grow, rather than traditional metrics alone. We are committed to adhering to anti-exclusion practices, removing barriers to access, and enhancing opportunities for all individuals based on merit and potential. Your skills, experience, and perspective are valuable—and we want to empower you to make your mark here with us. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Ability to stand, walk, bend, and lift for extended periods while performing warehouse tasks., • Physical strength and stamina to lift, carry, push, or pull materials and products (typically up to 50–75 lbs)., • Manual dexterity and hand-eye coordination to operate warehouse equipment, such as forklifts, pallet jacks, and scanners., • Visual acuity to read labels, inventory lists, and shipping documents accurately., • Mobility to move safely throughout warehouse and storage areas, including climbing ladders or stairs if necessary., • Tolerance for varied environmental conditions, including temperature changes, noise, and dust in warehouse settings., • Ability to wear and use personal protective equipment (PPE) as required for safety. Schedule: Eight-hour shift Porcelanosa offer is contingent upon Proof of legal authorization to work in the United States for Porcelanosa, which will be confirmed by E-Verify within three business days of your hire date. Work Remotely No remote work is available. 2:00 PM - 10:30 PM

Job Description With demonstrated packaging knowledge and experience, performs moderate to advanced functions relating to the packaging of drug products consistent with established Current Good Manufacturing Practices (cGMP), customer requirements, and in conjunction with all Standard Operating Procedures (SOP). Is qualified in Filling or Labeling. Assists in troubleshooting process issues. Responsible for the safe and efficient execution of job duties, while ensuring product compliance to established standards. All incumbents are responsible for following applicable Division & Company policies and procedures. Responsibilities: • Competently operates pharmaceutical packaging machinery which may include stamp machines, tape machines, box machines, electronic scales, and other machinery., • Ensures that all equipment is running properly., • Executes processes such as: material handling, capping, outserts/med guides, in-process checks, packing, stacking, cartoning, etc., • Is qualified in Filling and/or Labeling., • May request components, labels and inserts per the BPR/MPR., • May set up packaging machinery; may accurately set equipment programming according to BPR's and SOP's., • Conducts basic sets up, starts, operates, adjusts, troubleshoots and tears down packaging lines., • Executes Batch Production Record (BPR) or Packaging Master Records (MPR) and logbook documentation with detail and accuracy., • Accurately reviews BPR's steps for completeness., • Accuracy conducts sampling: Collects samples from each batch and submits to QA for retained samples., • Demonstrates the ability to execute procedures and complete tasks in a compliant and safe manner, • Executes the procedures used to clean pharmaceutical packaging equipment and facilities., • Conducts Master Cleans or A & B type Cleans and Line Clearances, • Assists in troubleshooting process issues., • Identifies and reports processing related issues to Packaging Supervisor or designee and to Quality personnel, • Executes the required in-process product quality checks and documents accurately., • Demonstrates the ability to work in collaboration with others as a part of a team., • Stays current on SOPs and cGMPs., • May participate in training qualifier classes., • Participate in safety teams, start-up discussions, incident debriefs, etc., • Carries out processing/packaging activities safely, as required, on a daily basis., • Follows all safety and compliance procedures and participates in required training., • Adheres to all cGMP compliance/regulatory mandates and quality requirements., • Ensures compliance with SOPs, Policies and Procedures as required by Par and regulatory agencies, • High school diploma or equivalent., • Qualified in Filling or Labeling., • Competent at all of the following processes:, • Material handling, • Capping, • Outserts/med guides, • In-process check, • Packing, • Stacking, • Cartoning, if applicable, • Competent in setting up and running machinery., • Competent in Master Clean/ Line Clearance or A&B type Cleans., • Competently samples batches., • Ability to follow both verbal and written instructions including SOP’s and Batch Record documentation., • Ability to accurately and precisely record data and batch information., • Ability to work in both independent and team environments., • Ability to assist in troubleshooting process issues., • Ability to participate in Continuous Improvement projects., • Proficient in reading and writing English to understand work instructions and document results. Physical Requirements: • Must be able to stand for long periods of time (8 or 12 hour shifts), lift at least 35 pounds, climb ladders, wear a dust mask or respirator and pass associated respirator tests and/or requirements, and be able to wear all required PPE, including safety glasses, ear plugs, and safety shoes., • Dexterity - ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects., • Vision - ability to see details at close range (within a few feet of the observer)., • Multi-limb Coordination - ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting or standing.

Job DescriptionDescription: Hiring Immediately for Roofing Subcontractors - Are you leading a skilled roofing crew looking for consistent, year-round work? Erie Home, a top industry leader, is seeking reliable roofing subcontractors. We’ve been ranked among the Top 10 on the Qualified Remodeler Top 500 list for consecutive years. Why Work with Erie Home? • $2,000 Sign-On Bonus, • Earning Potential: Up to $100,000 per year, • Reliable Work: Full-time, year-round projects, • Job Support: Detailed job packets provided, • Weekly Pay: Direct deposits every week, • No Material Costs or Dump Fees: We cover it allRequirements:, • General Liability Insurance, • Workman's Compensation Insurance, • EIN Letter, • Current Contractor’s License (if required by your state), • Maintenance and Alterations License, OSHA 10 or ability to get OSHA 10 compliant. Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information.

Job Description Schreiner Group LP has a full-time regular position for a Warehouse Operator. The Warehouse Operator will be part of the Warehouse and Shipping Team. Hours: Monday – Friday 10am – 7pm Responsibilities: • The Warehouse Operator is responsible for performing the clerical and physical tasks needed to ensure the accuracy of all orders shipped and received by the company., • This position will coordinate and verify all records on incoming and outgoing shipments and prepare items for shipment., • Performs monthly inventory cycle counts and aids in the completion of the physical inventory counts., • Tracks shipments and obtains proof of deliveries. Traces any missing or lost shipments. Communicates any issues with customer shipments to the Production Planner and Operation Manger., • High School Diploma or General Education Degree (GED) or higher educational degree., • Minimum of two years of experience in shipping and receiving in a manufacturing setting., • Exposure to ERP system is required., • Experience with forklift preferred., • Experience using FedEx, UPS, and other common carriers' software are required., • Intermediate knowledge of Microsoft Office (Excel, Work, and Outlook)., • Ability to lift, lower., • Ability to lift 50-75 pounds., • Standing for long periods of time., • Medical, Vision, Dental Insurance, • 401k Matching, • Paid Time off

Job Description Crumbl Montvale New Jersey Opening SOON! Who are we looking for? Crew members that can work overnight in the store at 9pm to 5am. If you are someone who enjoys baking, working with your hands, has a passion to serve and make memorable experiences, likes to learn and grow while being in a fast-paced environment, then Crumbl Cookies is the place for you. O... and did we tell you these cookies are the best in the world!!! • Tips, • Sampling cookies, • Discounted cookies, • Regular performance collaboration and career growth opportunities (Management), • Recognition awards Raving Fans Service | Baking Crumbl Cookies | Presentation & Cleanliness | Team Work | Efficiency | Technology | Kitchen Equipment • RAVING FANS SERVICE: Instinctively serves the customer with a smile and genuine intentions to provide customers with a great experience. Always acts in a way that represents the "Crumbl Culture"., • BAKING CRUMBL COOKIES: Follows Crumbl recipes with exactness and care. Pays close attention to the details of each cookie, making sure consistency and the highest of quality is experienced every time., • PRESENTATION & CLEANLINESS: Is detailed with each cookie's presentation, ensuring no steps are skipped, and the final product is warm, delicious, presentable, and filled with lots of Crumbl love. Constantly cleans and maintains order with the equipment and utensils used, as well as keeps the kitchen areas presentable and safe., • TEAMWORK: Understands the importance of delivering on individual role responsibilities but also shows a desire and effort to support fellow crew members perform other business tasks., • EFFICIENT: Has a mindset and work-ethic that is focused on providing exceptional service and Crumbl products in a quick manner. Commits to performing all duties extremely well at a pace that creates a memorable experience for the customer., • TECHNOLOGY: Understand and uses Crumbl business technology applications efficiently. Stays current on all training and displays a high level of performance in the technology tools used. Work-Ethic | Experience | Cultural Fit | Education | Commitment to People & Excellence • WORK-ETHIC: Committed to giving excellent effort in all responsibilities and tasks, • EXPERIENCE: Food or restaurant experience and customer service experience,, • CULTURAL FIT: Has a strong internal "why" that aligns with us and Crumbl Headquarters, has similar values and character, and has a passion for food and baking., • EDUCATION: High school or higher The Golden Rule & Potential • We treat all people well, with a positive and caring servant's attitude., • We have high integrity and character, which builds an unbreakable level of trust., • We are excellence driven, paying attention to every detail., • We plan to develop and promote from within for future roles that will be needed as we grow., • We are planning on expanding Crumbl locations throughout our area and then into other states throughout the country.

Job Description 100 Market St in Montvale New Jersey! Who are we looking for? If you are someone who enjoys baking, working with your hands, has a passion to serve and make memorable experiences, likes to learn and grow while being in a fast-paced environment, then Crumbl Cookies is the place for you. O... and did we tell you these cookies are the best in the world!!! • Sampling cookies, • Free cookies!, • Regular performance collaboration and career growth opportunities (Management), • Flexible scheduling, • Recognition awards Raving Fans Service | Baking Crumbl Cookies | Presentation & Cleanliness | Team Work | Efficiency | Technology | Kitchen Equipment • RAVING FANS SERVICE: Instinctively serves the customer with a smile and genuine intentions to provide customers with a great experience. Always acts in a way that represents the "Crumbl Culture"., • BAKING CRUMBL COOKIES: Follows Crumbl recipes with exactness and care. Pays close attention to the details of each cookie, making sure consistency and the highest of quality is experienced every time., • PRESENTATION & CLEANLINESS: Is detailed with each cookie's presentation, ensuring no steps are skipped, and the final product is warm, delicious, presentable, and filled with lots of Crumbl love. Constantly cleans and maintains order with the equipment and utensils used, as well as keeps the kitchen areas presentable and safe., • TEAMWORK: Understands the importance of delivering on individual role responsibilities but also shows a desire and effort to support fellow crew members perform other business tasks., • EFFICIENT: Has a mindset and work-ethic that is focused on providing exceptional service and Crumbl products in a quick manner. Commits to performing all duties extremely well at a pace that creates a memorable experience for the customer., • TECHNOLOGY: Understand and uses Crumbl business technology applications efficiently. Stays current on all training and displays a high level of performance in the technology tools used. Work-Ethic | Experience | Cultural Fit | Education | Commitment to People & Excellence • WORK-ETHIC: Committed to giving excellent effort in all responsibilities and tasks, • EXPERIENCE: Food or restaurant experience and customer service experience,, • CULTURAL FIT: Has a strong internal "why" that aligns with us and Crumbl Headquarters, has similar values and character, and has a passion for food and baking., • EDUCATION: High school or higher The Golden Rule & Potential • We treat all people well, with a positive and caring servant's attitude., • We have high integrity and character, which builds an unbreakable level of trust., • We are excellence driven, paying attention to every detail., • We plan to develop and promote from within for future roles that will be needed as we grow., • We are planning on expanding Crumbl locations throughout our area and then into other states throughout the country.

Job Description Crumbl Cookies in Montvale is opening soon! Who are we looking for? Crew members that can open the store at 5am M-F, 6am Sat. If you are someone who enjoys baking, working with your hands, has a passion to serve and make memorable experiences, likes to learn and grow while being in a fast-paced environment, then Crumbl Cookies is the place for you. O... and did we tell you these cookies are the best in the world!!! • Tips, • 401k for full time, • Sampling cookies, • Discounted cookies, • Regular performance collaboration and career growth opportunities (Management), • Recognition awards Raving Fans Service | Baking Crumbl Cookies | Presentation & Cleanliness | Team Work | Efficiency | Technology | Kitchen Equipment • RAVING FANS SERVICE: Instinctively serves the customer with a smile and genuine intentions to provide customers with a great experience. Always acts in a way that represents the "Crumbl Culture"., • BAKING CRUMBL COOKIES: Follows Crumbl recipes with exactness and care. Pays close attention to the details of each cookie, making sure consistency and the highest of quality is experienced every time., • PRESENTATION & CLEANLINESS: Is detailed with each cookie's presentation, ensuring no steps are skipped, and the final product is warm, delicious, presentable, and filled with lots of Crumbl love. Constantly cleans and maintains order with the equipment and utensils used, as well as keeps the kitchen areas presentable and safe., • TEAMWORK: Understands the importance of delivering on individual role responsibilities but also shows a desire and effort to support fellow crew members perform other business tasks., • EFFICIENT: Has a mindset and work-ethic that is focused on providing exceptional service and Crumbl products in a quick manner. Commits to performing all duties extremely well at a pace that creates a memorable experience for the customer., • TECHNOLOGY: Understand and uses Crumbl business technology applications efficiently. Stays current on all training and displays a high level of performance in the technology tools used. Work-Ethic | Experience | Cultural Fit | Education | Commitment to People & Excellence • WORK-ETHIC: Committed to giving excellent effort in all responsibilities and tasks, • EXPERIENCE: Food or restaurant experience and customer service experience,, • CULTURAL FIT: Has a strong internal "why" that aligns with us and Crumbl Headquarters, has similar values and character, and has a passion for food and baking., • EDUCATION: High school or higher The Golden Rule & Potential • We treat all people well, with a positive and caring servant's attitude., • We have high integrity and character, which builds an unbreakable level of trust., • We are excellence driven, paying attention to every detail., • We plan to develop and promote from within for future roles that will be needed as we grow., • We are planning on expanding Crumbl locations throughout our area and then into other states throughout the country.

Job Type Contract Description Hiring Immediately for Roofing Subcontractors - Are you leading a skilled roofing crew looking for consistent, year-round work? Erie Home, a top industry leader, is seeking reliable roofing subcontractors. We’ve been ranked among the Top 10 on the Qualified Remodeler Top 500 list for consecutive years. Why Work with Erie Home? • $2,000 Sign-On Bonus, • Earning Potential: Up to $100,000 per year, • Reliable Work: Full-time, year-round projects, • Job Support: Detailed job packets provided, • Weekly Pay: Direct deposits every week, • No Material Costs or Dump Fees: We cover it all Requirements, • General Liability Insurance, • Workman's Compensation Insurance, • EIN Letter, • Current Contractor’s License (if required by your state), • Maintenance and Alterations License, OSHA 10 or ability to get OSHA 10 compliant. Erie Home is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, political affiliation, sexual orientation, marital status, disability, age, military service, or any other protected class. If you need a reasonable accommodation due to a disability, please contact Human Resources with your request and contact information.