Nc jobs in Seattle, WashingtonCreate job alerts

About QuickMD: \n QuickMD is a leading telemedicine provider, delivering high-quality virtual care across 44 states. Since our founding in 2019, we have helped more than 100,000 patients access essential medical treatment, with a primary focus on addiction care, and more attention on weight management, and general telehealth services. Our commitment to innovation and physician support has made us a trusted name in virtual medicine. \n We offer substantial flexibility, allowing physicians to set their own schedules and work from anywhere—without administrative burdens. Our streamlined EMR and dedicated support team ensure an efficient, seamless practice environment so you can focus on patient care. QuickMD provides industry-leading compensation ($35 per consult), with top physicians in high-demand states earning an average of $200 per hour and many exceeding $400K annually. To succeed in this role, physicians should commit at least 15-20 hours per week. \n By joining QuickMD, you will be part of a growing network of experienced physicians who are helping to expand access to care, support addiction treatment efforts, and improve patient outcomes in underserved communities. \n Job Description: \n We are seeking dedicated, patient-focused physicians licensed in at least to join our team. Whether your background is in primary care, internal medicine, addiction medicine, emergency medicine, or urgent care, this role provides an opportunity to practice modern, high-quality medicine without the constraints of a traditional practice setting. While most of our services are fully virtual, in-person hybrid opportunities may be available. \n Responsibilities: \n\n • Provide exceptional virtual care, including patient assessments, medical history reviews, and appropriate medical treatment.\n, • Deliver compassionate, patient-centered care, building therapeutic doctor-patient relationships.\n, • Order and interpret lab tests as needed to make informed, high-quality treatment decisions.\n, • Prescribe medications and provide expert guidance on their proper usage (QuickMD does not prescribe controlled substances, except for buprenorphine for opioid addiction treatment).\n, • Collaborate with physicians and nurse practitioners, experienced nurses, and a dedicated support staff to ensure comprehensive patient care.\n, • Maintain appropriate medical documentation to support continuity of care.\n, • Active medical license in at least three U.S. states, but preferably five, plus willingness to obtain additional state licenses (assistance provided and costs covered).\n, • Critical to be licensed in at least five states and/or three or emore of the following states: CA, FL, NC, PA, TX.\n, • Experience treating patients in telehealth or high-volume in-person settings.\n, • Ability to schedule and work at least 15 core hours weekly (8AM-6PM locally), over four days each week, scheduling at least one week in advance.\n, • Strong communication skills and a commitment to medical excellence.\n, • Comfort using telemedicine platforms and EMRs (training provided).\n, • Passion for expanding access to care and making a meaningful impact.\n, • At least one DEA certification and applicable CSL (if required). \n\n Why Top Physicians Choose QuickMD: \n\n • Complete schedule flexibility—work from anywhere, on your terms.\n, • Highly competitive compensation, with many providers earning over $400K annually while maintaining a balanced workload.\n, • No administrative burdens—focus entirely on patient care, free from billing or office overhead.\n, • Fast track onboarding, with a dedicated concierge service to expedite the process.\n, • Malpractice insurance fully covered, with dedicated legal and compliance support.\n, • Advanced, seamless telemedicine technology designed for physician efficiency.\n

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Blue Origin Operations, which is comprised of Integrated Supply Chain, Test Operations, Safety, Quality, and Mission Assurance. This includes Manufacturing and Supply Chain support across all Blue Origin facilities. As part of a hardworking team of Machinists, NC Programmers and Technicians you will setup, operate and maintain world class, state of the art CNC machines to fabricate components for various spaceflight systems. You will share in the team's impact on all aspects of CNC machining and fabrication. You will be responsible for setting up and operating a variety of CNC machines and equipment to produce accurate components enabling first article success on tight tolerance, high value parts. Other responsibilities include: * Hands on editing of NC programs, set up and machining of 3, 4 and 5 axis mills, multi axis lathes, and development of critical machining processes * Working with engineering to document and standardize production processes * Partner with leadership and engineering to prioritize work based on production schedule and organizational goals. This role will impact space flight programs and objectives! * Ensure product quality and conformance to engineering specifications * B Shift We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! Qualifications: * Passion for our mission: Millions of people living and working in space! * A minimum of 6 years of experience in machining aerospace components. * Experience machining the following materials: nickel-based stainless steel alloys (Inconel, Monel, etc.), Copper, Aluminum and/or Titanium * Extensive experience with one or more of the following CNC machines: Mazak, Hass, Kuraki and/or DMG Mori * Experience with 3, 4 and 5 axis CNC machining (Horizontal, mill/turns) * Working knowledge of Fanuc, Siemens, Mazatrol or other CNC controls * Excellent blue print reading skills including GD&T per ASME Y14.5M-1994 standard * Familiar with use of personal computers * Ability to provide Design for Manufacturing feedback * Must be physically able to climb ladders, stairs, work in small/restricted areas, and lift and carry 25 lbs. * Must be able to work nights and overtime when necessary. Desired: * Tooling and fixture design. * Vertical Turning Lathe (VTL) experience * Outside processing knowledge including: heat treat, plating, coating, EDM, grinding, etc. * CMM programming/operation experience * CNC programming skills, preferably Mastercam X6 thru 2018 * Conversational programming on the machine * Experience operating heavy lifting equipment such as cranes and forklifts * Working knowledge of Heidenhain Compensation Range for: WA applicants is $39.34 - $55.07 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of Advanced Concepts and Enterprise Engineering (ACE), supporting Blue Origin's mission of millions of people living and working in space for the benefit of Earth. The team fosters innovation and drives engineering workflows of the future, shared solutions and standards, simplicity and lower costs, and manufacturable design. Blue Origin recently announced TeraWave, our next-generation satellite constellation that will deliver unprecedented power and performance. Senior Technician in the Solar Center of Excellence, you'll be one of the people helping realize this ambitious vision. This is your opportunity to work on cutting-edge space hardware that was under wraps until now-and help write the next chapter of space infrastructure. As part of a hardworking team of specialists, technicians, and engineers you will take complex space power assemblies from concept to validated hardware by performing hands-on build and integration, executing structured test campaigns, and turning results into actionable insights. You will uphold rigorous safety, cleanliness, and quality standards with traceability, proactively resolve production issues, and sustain the tools and equipment that enable reliable operations. You will document and refine processes, mentor teammates, and collaborate across disciplines and sites to deliver flightworthy hardware on schedule in a dynamic R&D environment. Special Mentions: • Relocation provided, • Travel expected up to 25% of the time, • Interviews will include a technical assessment Responsibilities include but are not limited to: • Assemble solar cell strings; perform welding/tabbing, adhesive dispense, lamination/encapsulation, and rework, • Operate solar simulators, IV flash, EL imaging; log data and maintain traceability, • Set up and run TVAC, thermal cycling, AO/UV exposures; handle test article prep and posttest inspections, • Build and operate deployment test rigs; install sensors and execute instrumented tests, • Follow ESD, cleanroom, FOD controls; maintain cleanliness and calibration of tools/metrology, • Conduct incoming inspections and basic metrology (pull/shear, thickness, flatness), • Troubleshoot build issues; execute containment and rework; document NCs, • Train junior techs; contribute to WIs/checklists and process improvements, • Support fixture/tooling maintenance; perform safe lifts/transfers of fragile assemblies, • Maintain lab organization (5S), consumable inventory, and equipment preventive maintenance, • Work collaboratively in a scrappy cross-disciplinary R&D environment with a geographically distributed team Minimum Qualifications: • High school diploma/equivalent; 8+ years aerospace hardware assembly/test (or AS degree with 6+ years), • Handson welding, adhesive dispense, lamination/encapsulation, and rework, • Operate solar simulators, IV flash, EL imaging; record data with full traceability, • Test article prep and posttest inspection, • ESD/cleanroom/FOD compliance; metrology (pull/shear, thickness, flatness); NC documentation Preferred Qualifications: • 10-12+ years; IPC JSTD001/IPCA610 certifications (CIS/CIT) and NASASTD8739 series training, • Lead tech/trainer experience; contributes to WIs/checklists and process improvements, • Forklift/overhead crane and precision handling certifications; preventive maintenance ownership, • Handson stringing/tabbing, • Setup/run TVAC, thermal cycling, AO/UV exposures Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role is part of the Lunar Permanence business unit, which develops Blue Origin's Blue Moon landers and related products. To further Blue Origin's mission of millions of people living and working in space for the benefit of Earth, we are building sustainable infrastructure for our transport of crew and cargo from Earth to the lunar surface. We are looking for an experienced responsible or project pump engineer for our Lunar Lander for NASA's Artemis mission to lead the design and development of clean sheet pumps for various water,coolantand propellant systems. The successful candidate will have designed, manufactured, and tested multiple electrically driven pumps for flight vehicles where cost and mass are critical factors. Bring your technicalexpertise, leadership skills, and dedication to quality to positivelyimpactsafe human spaceflight. Passion for our mission and vision isrequired! Qualifications: * B.S. in Aerospace, Mechanical, or related technical subject area * 5+ years of experience in complete pump design * Professional experience designingseveral aspectsof pumps such as impellers, diffusers, shafts, motors, and bearings in various fluids such as water, LOX, LH2, or LNG * Demonstrated ability to oversee a pump development project through early sizing and trade studies, design, analysis, manufacturing, and delivery to customer * Goodverbal, written, and graphical communication skills with ability to directly collaborate with external parties including government and commercial entities * Willingness to work on-site with occasional travel Desired: * Experience in 3D CAD programs (Creo preferred) and Finite Element Analysis (FEA) tools (ANSYS preferred) * 7+ years of experience in pump designacross most phases of the product life cycle * Experience integrating pumps in space vehicle applications * Experience working withhigh-speedsubmerged motors * Experience in engineering analysis/support for disposition of Non-Conformance (NC) Responsibilities: * As the owner of their cryogenic pump, the Responsible Engineer will lead the development, design, analysis, and testing of cryogenic pumps for Blue Origin lunar vehiclesforsome of the most advanced space vehicles. * The position involves designing, analyzing, building, and testing cryogenic pumps, with key responsibilities including sizing components, performing mechanical design, and conducting structural and fluid analyses. * Provide technical leadership to the team by advising on technical approaches and applying your experience to address our most challenging technical problems. * Oversee manufacturing, assembly, and manage full hardware ownership throughout the product life cycle. * Collaborate with multidisciplinary teams across motor design, bearings, fluids, thermal structure, manufacturing, and testing. * Interface with production toensuredesigns translateinto affordable products. * Manage the pump system life cycle, including definition, interfaces, detailed design,componentdevelopment, assembly, verification, and operation. * Work with internal and external suppliers, NASA, and National Team partners on lunar transportation and related programs that will return humans to the Moon and extend human presence permanently beyond the bounds of Earth. Compensation Range for: CA applicants is $99,201.00 - $138,880.35 CO applicants is $90,934.00 - $127,307.25 WA applicants is $99,201.00 - $138,880.35 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Application close date: Applications will be accepted on an ongoing basis until the requisition is closed. At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight! This role supports the development and operations of New Glenn, a single-configuration, heavy-lift orbital launch vehicle capable of routinely carrying people and payloads to low-Earth orbit, geostationary transfer orbit, cislunar, and beyond. Its first stage is fully reusable, and the vehicle was designed from the beginning to be human-capable. Join a dedicated team of engineers at Blue Origin, where you will lead the design, analysis, development, and qualification of next-generation components for the New Glenn Rocket. As a Fluid Systems Engineer II, your work will focus on critical systems, including valves, regulators, accumulators, actuators, manifolds, mechanisms, pumps, and other mechanical devices essential to our vehicles and mission success. At Blue Origin, you'll apply your technical expertise and leadership to shape the future of space exploration. This role offers the opportunity to make a tangible impact on the New Glenn Rocket program, working alongside a talented team committed to innovation, quality, and mission success. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required! Key Responsibilities: • Oversees lifecycle of component systems, from defining requirements and interfaces through conceptual and detailed design, development, assembly, verification, qualification testing, operation, manufacturing support, and post-flight serviceability., • Ensure all cost, schedule, and performance targets are achieved through meticulous planning and execution., • Collaborate with project management and internal Blue Origin teams to identify, procure, and integrate high-quality components., • Perform sizing, material selection, and analyses (fluid flow, thermal, structural) to ensure performance under pressure, vibration, temperature, and mechanical loads., • Support fabrication, installation, and testing of flight hardware, working closely with suppliers and support organizations., • Contribute to all aspects of mechanical design, including requirements definition, layouts, component selection, modeling, drafting, manufacturing, and test planning. Minimum Qualifications: • Bachelor's degree in mechanical engineering, aerospace engineering, or a related field., • 2+ years of proven experience designing fluid, mechanical, or electro-mechanical systems for aerospace or similar high-reliability applications., • Proficiency in 3D CAD software (Creo preferred) and Finite Element Analysis (FEA) tools (ANSYS preferred)., • Expertise in creating engineering drawings with GD&T per ASME Y14.5 standards., • Knowledge of fluid or mechanical components such as valves, regulators, accumulators, mechanisms, or pumps., • Strong interpersonal skills, with a track record of building trust and fostering professional collaboration., • Passion for advancing safe human spaceflight and alignment with Blue Origin's mission. Preferred Qualifications: • Experience in the aerospace or space industry, particularly with launch vehicles or ground systems., • Experience with fabrication, integration, and quality control for tubes, machined parts, and welded assemblies., • Expertise in designing systems for cryogenic fluids (e.g., hydrogen, oxygen, methane) or hydraulic systems in liquid/gaseous states., • Proficiency in thermo-fluid analysis tools, such as Thermal Desktop (Sinda Fluint), AFT (Fathom/Arrow), REFPROP, or Excel-based models., • Knowledge of materials properties, treatments, and aerospace-grade materials., • Demonstrated ability to manage supplier relationships, drive component development, and support testing., • Hands-on experience assembling and testing mechanical or pressurized systems, including cryogenic transport elements (tubes, bellows, flex hoses, or Mechanical Flexible Assemblies)., • Familiarity with designing seals, bearings, or actuators for high-performance applications., • Experience supporting non-conformance (NC) resolution for fluid components, machined parts, weldments, or electro-mechanical assemblies. Compensation Range for: WA applicants is $99,201.00 - $138,880.35 Other site ranges may differ Culture Statement Don't meet all desired requirements? Studies have shown that some people are less likely to apply to jobs unless they meet every single desired qualification. At Blue Origin, we are dedicated to building an authentic workplace, so if you're excited about this role but your past experience doesn't align perfectly with every desired qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. Export Control Regulations Applicants for employment at Blue Origin must be a U.S. citizen or national, U.S. permanent resident (i.e. current Green Card holder), or lawfully admitted into the U.S.as a refugee or granted asylum. Background Check * Required for all positions: Blue's Standard Background Check * Required for Certain Job Profiles: Defense Biometric Identification System (DBIDS) background check if at any time the role requires one to be on a military installation * Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs. and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. * Required for certain Job Profiles: Ability to obtain and maintain Merchant Mariner Credential, which includes pre-employment and random drug testing as well as DOT physical Benefits * Benefits include: Medical, dental, vision, basic and supplemental life insurance, paid parental leave, short and long-term disability, 401(k) with a company match of up to 5%, and an Education Support Program. * Paid Time Off: Up to four (4) weeks per year based on weekly scheduled hours, and up to 14 company-paid holidays. * Dependent on role type and job level, employees may be eligible for benefits and bonuses based on the company's intent to reward individual contributions and enable them to share in the company's results, or other factors at the company's sole discretion. Bonus amounts and eligibility are not guaranteed and subject to change and cancellation. Please check with your recruiter for more details. Equal Employment Opportunity Blue Origin is proud to be an Equal Opportunity/Affirmative Action Employer and is committed to attracting, retaining, and developing a highly qualified and dedicated work force. Blue Origin hires and promotes people on the basis of their qualifications, performance, and abilities. We support the establishment and maintenance of a workplace that fosters trust, equality, and teamwork. We provide all qualified applicants for employment and employees with equal opportunities for hire, promotion, and other terms and conditions of employment, regardless of their race, color, religion, sex, sexual orientation, gender identity, national origin/ethnicity, age, physical or mental disability, genetic factors, military/veteran status, or any other status or characteristic protected by federal, state, and/or local law. Blue Origin will consider for employment qualified applicants with criminal histories in a manner consistent with applicable federal, state, and local laws, including the Washington Fair Chance Act, the California Fair Chance Act, the Los Angeles Fair Chance in Hiring Ordinance, and other applicable laws. For more information on "Know Your Rights," please see ___. Affirmative Action and Disability Accommodation Applicants wishing to receive information on Blue Origin's Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact us at___. Please note this is a publicly managed inbox. Please do not include any personal medical information in your request. California Applicant Privacy Notice If you are a California resident, please reference the CA Applicant Privacy Notice ___.

Important callouts: Must have CNA L-NC WA license* Position / Specialty: Inpatient PCT Start date: 8/14/2024 Shift: 2x12s and 2x8s, 0700-1930 and 0700-1530 days, weekends, 1 on-call per month ** Required to work all scheduled shifts, facility cannot accommodate scheduling requests outside of approve

Prepare agendas and make arrangements for meetings, including setting up conference calls and video conferences. Extensive experience with Microsoft internal tools and software, including proficiency in Microsoft Word, Excel (V-lookups, pivot tables), and PowerPoint. Pay ranges vary based on multipl

Drive project success: Lead enhancements and small projects as a project manager. Ability to plan, organize, schedule, and implement projects and in accordance with BECU and industry project management methodologies. Strong understanding of various project methodologies, including waterfall, agile,

Job Description Job Title: Manufacturing Associate Job Description We are seeking a passionate and curious Manufacturing Associate to join our dynamic team. This role is ideal for individuals who thrive on tackling new challenges, solving complex problems, and continuously learning. As a Manufacturing Associate, you will have the opportunity to drive impactful projects, collaborate with innovative minds, and explore new avenues. Your curiosity will not only fuel your personal growth but also contribute to the team's success. Responsibilities • Execute process recipes and monitor equipment and processes., • Perform basic tasks, including sampling and routine maintenance of lab equipment., • Assist in media and buffer compounding., • Comply with written procedures for safety requirements, cGMP practices, standard operating procedures, and manufacturing documentation., • Perform and monitor critical processes such as single-use bioreactor operations, perfusion, chromatography, product filtration, and solution preparation., • Support the introduction of new products and technologies into the facility., • Initiate non-conformances (NC)., • Execute Electronic Batch Records (EBR) using the Manufacturing Execution System (MES)., • Draft and revise manufacturing procedures and standard operating procedures as necessary., • Support operations of glasswasher and autoclave., • Strong focus on right the first time and attention to detail., • Effective task/time management organizational skills., • Capacity to develop solutions to technical issues of moderate scope., • Ability to organize, analyze/interpret, and effectively communicate individual results., • Motivated, self-starter with strong mechanical aptitude., • Good interpersonal, team, and communication skills., • Bachelor’s degree in Science or Engineering; or, • Associate’s degree in a science-related area and relevant experience; or, • High school diploma or GED and 3+ years of relevant experience., • 3+ years experience within the Bio/Pharma market, inventory, pharmaceutical, cGMP., • Experience with SOP, document control, editing, work instruction, production, GMP, cleanroom, laboratory, aseptic technique, sanitization, aseptic, batch record, troubleshooting, manufacturing process, materials management and transactions., • SAP Production Data Specialist. The role is 100% onsite in Redmond, WA, supporting drug manufacturing in a GMP environment. The facility operates 24 hours a day with day, swing, and night shifts. Day shift runs from Wednesday to Saturday (7:00am - 6:00pm), swing shift from Wednesday to Saturday (12:00pm - 11:00pm) with a 10% premium above base pay, and night shift from Wednesday to Friday with every other Saturday (7:00pm - 8:00am) We reserve the right to pay above or below the posted wage based on factors unrelated to sex, race, or any other protected classification. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. This temporary role may be eligible for the following: • Medical, Dental & Vision, • 401(k)/Roth, • Basic/Supplemental Life & AD&D, • Short and long-term disability, • HSA & DCFSA, • Transportation benefits, • Employee Assistance Program This is a Contract position based out of Redmond, WA. Pay and Benefits The pay range for this position is $30.00 - $42.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Job Title: Manufacturing Associate Job Description We are seeking a passionate and curious Manufacturing Associate to join our dynamic team. This role is ideal for individuals who thrive on tackling new challenges, solving complex problems, and continuously learning. As a Manufacturing Associate, you will have the opportunity to drive impactful projects, collaborate with innovative minds, and explore new avenues. Your curiosity will not only fuel your personal growth but also contribute to the team's success. Responsibilities • Execute process recipes and monitor equipment and processes., • Perform basic tasks, including sampling and routine maintenance of lab equipment., • Assist in media and buffer compounding., • Comply with written procedures for safety requirements, cGMP practices, standard operating procedures, and manufacturing documentation., • Perform and monitor critical processes such as single-use bioreactor operations, perfusion, chromatography, product filtration, and solution preparation., • Support the introduction of new products and technologies into the facility., • Initiate non-conformances (NC)., • Execute Electronic Batch Records (EBR) using the Manufacturing Execution System (MES)., • Draft and revise manufacturing procedures and standard operating procedures as necessary., • Support operations of glasswasher and autoclave., • Strong focus on right the first time and attention to detail., • Effective task/time management organizational skills., • Capacity to develop solutions to technical issues of moderate scope., • Ability to organize, analyze/interpret, and effectively communicate individual results., • Motivated, self-starter with strong mechanical aptitude., • Good interpersonal, team, and communication skills., • Bachelor’s degree in Science or Engineering; or, • Associate’s degree in a science-related area and relevant experience; or, • High school diploma or GED and 3+ years of relevant experience., • 3+ years experience within the Bio/Pharma market, inventory, pharmaceutical, cGMP., • Experience with SOP, document control, editing, work instruction, production, GMP, cleanroom, laboratory, aseptic technique, sanitization, aseptic, batch record, troubleshooting, manufacturing process, materials management and transactions., • SAP Production Data Specialist. The role is 100% onsite in Redmond, WA, supporting drug manufacturing in a GMP environment. The facility operates 24 hours a day with day, swing, and night shifts. Day shift runs from Wednesday to Saturday (7:00am - 6:00pm), swing shift from Wednesday to Saturday (12:00pm - 11:00pm) with a 10% premium above base pay, and night shift from Wednesday to Friday with every other Saturday (7:00pm - 8:00am) Job Type & Location This is a Contract position based out of Redmond, WA. Pay and Benefits The pay range for this position is $30.00 - $42.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

100% REMOTE This Jobot Job is hosted by: Katherine Krull Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $160,000 - $180,000 per year A bit about us: Come join a growing direct-to-consumer e-commerce company in the lawn care industry, utilizing cutting-edge data analysis! Job Title: Staff Software Engineer Job Location: 100% REMOTE, but you must reside in one of the following states: AR, CA, CO, CT, HI, MA, ME, MN, MO, NC, NV, NY, OK, PA, TX, UT, VT, or WA. Pay Rate: $160k-$180k/yr. + Comprehensive Benefits Must have: • 5+ yrs of Frontend Development experience, building & engineering user interfaces, • Expertise with React, • Experience leading frontend initiatives, making architectural decisions, bridging the gap between FE and existing BE systems, and mentoring team members, • Python, Django, and FastAPI, • Kubernetes, Argo, and Google Cloud Platform, • Experience building full-stack applications from scratch, • Infrastructure as code and DevOps experience Why join us? A mission-driven company focused on sustainability and innovation. ? A remote-first culture with flexibility and autonomy. ? A collaborative and supportive team environment. ? Competitive salary, equity, and benefits. If you’re passionate about building great software and want to work on products that make a positive environmental impact, we’d love to hear from you Job Details We are seeking a talented and experienced Staff-level Full Stack Engineer with a strong emphasis on frontend development to help shape the future of our digital products. This is an opportunity to have a major impact on our technology stack, user experience, and engineering culture as we continue to scale. You will work closely with a cross-functional team of designers, product managers, and backend engineers to build high-quality, performant, and scalable web applications. REQUIREMENT: You must reside in one of the following states: AR, CA, CO, CT, HI, MA, ME, MN, MO, NC, NV, NY, OK, PA, TX, UT, VT, or WA. What You’ll Do ? Lead Development: Drive the development of new product features from concept to launch, ensuring high-quality implementation and user experience. ? Design & Architect: Build scalable, high-performance frontend architectures that seamlessly integrate with backend APIs. ? Technical Decision-Making: Evaluate trade-offs between different solutions and make informed technical choices that align with business and user needs. ? Mentorship: Support other engineers through code reviews, pair programming, and technical guidance. ? Collaboration: Work closely with Product, Design, and Backend teams to deliver cohesive and intuitive user experiences. ? Process Improvement: Contribute to enhancing development processes, best practices, data driven decisions, and engineering culture. Must have: • 5+ yrs of Frontend Development experience, building & engineering user interfaces, • Expertise with React, • Experience leading frontend initiatives, making architectural decisions, bridging the gap between FE and existing BE systems, and mentoring team members, • Kubernetes, Argo, and Google Cloud Platform, • Experience building full-stack applications from scratch, • Infrastructure as code and DevOps experience Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Center based : Southborough, MA North Carolina - Home based in the following regions: Asheville, Charlotte, Greensboro, Greenville, Raleigh and the triangle area, Winston-Salem NC Center based : Chapel Hill, Greenville, Raleigh and Winston-Salem Tennessee: Home based in the greater Chattanooga, Knox

Job DescriptionBack To Search ResultsPhlebotomist - Seattle, Washington Worksite Location: Seattle, Washington, 98198 Pay Range/Rate: Please apply for details Employment Type: Full Time Years Experience: 1 Assignment Type: Contract Start Date: 04/13/2026 Job Duration: 51 Weeks Job ID: 56956 Shift Time: Day Shift Hours Per Week: 40 Shifts Per Week: 5 Hours Per Shift: 8 Job Summary Are you a Phlebotomist looking for a FRESH START? If so, we can help YOU! Cell Staff is a nationwide healthcare staffing company that has partnered with Correctional facilities across your state to help them find AMAZING Phlebotomists. Were looking for you to become a valued member of the healthcare team at our clients facility! Phlebotomist Details * Full Time Schedules * Some weekends may be required * 8 hour shifts available * Contract Position Phlebotomist Duties * Blood Collection: Performing venipuncture and capillary puncture to collect blood specimens from inmates for diagnostic testing, therapeutic procedures, or research purposes, following established protocols and safety procedures. * Specimen Handling: Properly labeling and handling blood specimens to ensure accurate identification and integrity, including processing specimens for transport to the laboratory and maintaining appropriate documentation of collection procedures. * Patient Interaction: Interacting with inmates in a professional and compassionate manner, explaining the blood collection process, addressing any concerns or questions, and providing support to alleviate anxiety or discomfort. * Infection Control: Adhering to infection control practices to prevent the transmission of bloodborne pathogens within the correctional facility, including proper hand hygiene, use of personal protective equipment (PPE), and compliance with standard precautions. * Equipment Maintenance: Maintaining phlebotomy equipment and supplies, such as needles, tubes, and collection trays, ensuring they are clean, sterile, and in good working condition to facilitate efficient and safe blood collection procedures. * Documentation: Documenting blood collection activities accurately and promptly, recording relevant information such as patient demographics, specimen details, and collection dates/times in accordance with facility policies and regulatory requirements. * Quality Assurance: Participating in quality assurance activities to monitor and improve the quality of phlebotomy services within the correctional facility, such as participating in proficiency testing, performing quality control checks, and identifying areas for process improvement. * Emergency Response: Being prepared to respond to medical emergencies within the correctional facility that may require phlebotomy services, such as assisting with blood draws for urgent diagnostic tests or therapeutic interventions under the direction of medical staff. * Training and Education: Providing training and education to correctional staff on phlebotomy procedures, infection control practices, and safety precautions related to blood collection to promote a safe and efficient working environment. * Collaboration: Collaborating with other healthcare professionals, including nurses, physicians, and laboratory staff, to ensure coordinated patient care and accurate interpretation of laboratory test results for inmate health management. Phlebotomist Qualifications * Graduation from an accredited educational institution * Licensed as a Phlebotomist by the State in which the position is located. The license MUST be in good standing * 1+ year of relevant Phlebotomist experience Cell Staff Core Values * Create a team environment with a family spirit * Build Open and honest relationships * Embrace and drive change * Show humility and accountability * Be passionate and relentless Phlebotomist Benefits * Health, Dental, Vision, Life, and Short-Term Disability Insurance * 401k Retirement Plan * Competitive Pay Packages * WEEKLY PAY * Travel Stipends are available for qualified candidates Cell Staff is here to offer you something FRESH. We understand you have many options but there really is no one like us and we encourage you to find out why: We cant wait to show you how good GOOD can be! Please apply below and one of our recruiters will reach out to you within 24 hours! #ZR APPLY NOW "Last NamePrimary PhoneStatePreferred Work States (Please select all that apply)AlabamaAlaskaAmerican SamoaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict of ColumbiaFloridaGeorgiaGuamHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaNorthern Mariana IslandsOhioOklahomaOregonPennsylvaniaPuerto RicoRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahU.S. Virgin IslandsVermontVirginiaWashingtonWest VirginiaWisconsinWyomingArmed Forces AmericasArmed Forces EuropeArmed Forces PacificCurrent or Desired Job TitleShift & Schedule PreferencesYears of ExperienceYesNoConsent to Texting / SMS*YesNoAttach Resume - Optional But Always Encouraged!Max. file size: 128 MB.CAPTCHA I want more jobs like this in my inbox.Sign Up for Job AlertsShare This JobRelated JobsRegistered Nurse - Orono, ME Location: Orono, ME Professional: Registered Nurse Employment Type: Date Added: 05/06/2026 Physical Therapist - Seattle, WA Location: Seattle, WA Professional: Physical Therapist Employment Type: Date Added: 06/01/2026 Registered Nurse - Morganton, NC Location: Morganton, NC Professional: Registered Nurse Employment Type: Date Added: 05/11/2026 Registered Nurse - Los Angeles, CA Location: Los Angeles, CA Professional: Registered Nurse Employment Type: Date Added: 05/11/2026 Company DescriptionCell Staff emerged from a blend of experience, successes, and failures, shaped by the collective careers of three friends united by a dream: to create a workplace where everyone loves what they do. In 2014, the dream was realized with the establishment of a unique healthcare staffing agency. Our approach diverges from the traditional transactional staffing model, focusing instead on treating people exceptionally well. This mindset is powered by a culture of compassion, integrity, and transparency. We nurture strong, long-term relationships, and our love for people radiates from our core to every aspect of our business. Today, Cell Staff has earned a reputation for delivering exceptional service and care to healthcare professionals seeking meaningful careers and also to a wide array of remarkable clients and the patients they serve. Our expertise spans traditional healthcare settings, education, behavioral health, correctional institutions, and various other government facilities. Each placement we make serves as a real-world demonstration of our commitment to serving the healthcare community and its diverse sectors that people simply can’t live without. Cell Staff has consistently earned industry recognition as a top staffing firm by Clearly Rated, Fortune, and others. Additionally, in 2023, Staffing Industry Analysts (SIA) named Cell Staff a 2023 Best Staffing Firm to Work For as the number-one firm in the 50-200 employee category.Cell Staff emerged from a blend of experience, successes, and failures, shaped by the collective careers of three friends united by a dream: to create a workplace where everyone loves what they do.\r\n\r\nIn 2014, the dream was realized with the establishment of a unique healthcare staffing agency. Our approach diverges from the traditional transactional staffing model, focusing instead on treating people exceptionally well. This mindset is powered by a culture of compassion, integrity, and transparency. We nurture strong, long-term relationships, and our love for people radiates from our core to every aspect of our business.\r\n\r\nToday, Cell Staff has earned a reputation for delivering exceptional service and care to healthcare professionals seeking meaningful careers and also to a wide array of remarkable clients and the patients they serve. Our expertise spans traditional healthcare settings, education, behavioral health, correctional institutions, and various other government facilities. Each placement we make serves as a real-world demonstration of our commitment to serving the healthcare community and its diverse sectors that people simply can’t live without.\r\n\r\nCell Staff has consistently earned industry recognition as a top staffing firm by Clearly Rated, Fortune, and others. Additionally, in 2023, Staffing Industry Analysts (SIA) named Cell Staff a 2023 Best Staffing Firm to Work For as the number-one firm in the 50-200 employee category.

Job Description Looking for a Flexible Telemedicine job where you can work from home and control your schedule? We're seeking skilled physicians with multiple state licenses to provide virtual care primarily in the medical weight loss and urgent care space. If you do not have at least 3 or more active state licenses as well as recent urgent care experience OR 1+ year of experience prescribing compounded GLP-1s for weight loss - please DO NOT apply What's in it for you: • Flexible Schedule: 1099 Independent Contractor - Work 20-40 hours/week. Choose your hours and adjust them as needed., • Competitive Pay: Up to $180 per hour, depending on type of visits completed, • Fully Remote: Deliver care through video, phone, and chat., • Licensure: We have needs in all states! Active non-restrictive MD/DO license in 3 states minimum (highest need states: CA, TX, FL, NY, VA, NC, WA, OH, PA, GA)., • Experience: 3+ years of experience after board certification. Must have recent urgent care experience OR at least 1 year of experience prescribing compounded GLP-1s for weight loss., • Board Certification: Internal Medicine (IM), Family Medicine (FM), or Emergency Medicine

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. This role requires either permanent relocation to one of the following locations listed below (relocation assistance provided) or the ability to travel frequently from your location (50%+ travel annually): • Umatilla, OR (Urgent need), • Seattle, WA, • Chicago, IL, • Raleigh, NC, • Pittsburgh, PA, • Reno, NV, • Ashburn, VA (Urgent need) Build something that matters—with people who trust you to own outcomes and deliver exceptional results for customers. Join us at Mantis Innovation where authentic people show up as themselves, take real ownership, and are trusted to do what’s right—for the business and the customer. Our culture is rooted in Tenacity, Excellence, Accountability, Curiosity, and Humility, and it shows up in how we work, collaborate, and deliver results that matter. WHY THIS ROLE • Starting salary: $100,000++++, • Annual bonus: Up to 10%, based on individual and company performance, • What sets us apart? A BMS Bonus Program that rewards ownership, business results, and customer impact, • Growth-focused: Ongoing training to develop both technical expertise and leadership capability WHO YOU ARE • Curious, driven, and focused on delivering strong outcomes, • You ask smart questions, dig into challenges, and continuously improve how work gets done, • You want your ideas to matter—and to be trusted to deliver the best results for the customer WHAT YOU’LL DO • Install, program, commission, and troubleshoot BMS/controls systems, • Partner with project teams to deliver high‑quality, reliable solutions, • Own system performance and ensure customers consistently receive exceptional results, • Depending on your location, travel approximately 40-50% throughout the year to support projects and customers around the USResponsibilities, • Service of existing building control systems., • Startup of complete building control systems., • Install building control components (controllers, panels, conduit, sensors, etc.), • Low voltage control panel building., • Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements., • Perform a point-to-point checkout per standard procedures., • Perform software/hardware calibration required for proper equipment and system operation., • Perform low voltage cable installation/termination for small projects if needed., • Take on project commissioning activities to include daily meetings and documenting results. Qualifications, • Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task., • Can work both independently and as a part of a team., • Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time., • Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...), • Familiarity with CAD, construction drawings, • Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU), • Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6, • Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions, • Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes, • Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network., • Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations., • Possess valid state motor vehicle license and possess safe driving record as required by company’s insurance carrier., • Able to pass State and Federal security screening., • Out-of-state travel will be required depending on your location (estimated to be between 50%+ throughout the year if you are not located in one of the cities listed above), • Understanding of Mechanical and Electrical equipment in a typical Data Center application, • Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) Location Qualifications, • Chicago requirement: At least 5+ strong years of hands-on experience with BMS software, Tridium Niagara/Distech is required, • PNW (Seattle and Umatilla) requirement: PLC/SCADA Ignition experience

Job Description DSI is a sales enablement company with an immediate career opportunity for a motivated Account Sales Manager (ASM) for our growing Exclusive Distribution Model (EDM) team. This key role is Responsible for driving sales results of the client's products in the assigned territory. As the ASM, you will serve as the link between training and sales, and you will work closely with our partners and management on behalf of our client. You will be responsible for formal classroom-style training, side-by-side selling, informal group training, and generating excitement for selling and the overall opportunity. Additionally, you will evaluate opportunities and challenges and provide creative solutions. Your success will be measured by positive sales numbers, relationship building, timely reporting, and overall contribution to this program. To be considered for this exciting opportunity, you must live in or around the following locations. Denver, CO, Charleston, SC, Atlanta, GA, Nashville, TN, Raleigh, NC, Phoenix, AZ, Salt Lake City, UT, Chicago, IL, Portland, OR, Seattle, WA, Las Vegas, NV, Kansas City, MO. This role requires 50-75% travel. About DSI Founded in 1984, DSI is a family-owned company committed to delivering exceptional value and measurable results to our clients and partners. Our comprehensive services include sales management, marketing support, hardware logistics, immersive training, engineering expertise, and proprietary software solutions—all designed to drive growth and operational efficiency. At DSI, we believe strong relationships are the foundation of lasting success. We serve as a one-stop solution across a range of markets—including mobility, broadband, video, commercial, residential, Lodging & Institutions, and Multi-Dwelling Units—empowering our sales partners to uncover new opportunities and maximize their potential. Responsibilities • Work directly with partner representatives, owners, and senior management to drive and increase sales of the client’s products and services, • Use direct training, observation, side-by-side selling, and customer interactions as a direct method of demonstrating and educating employees about sales techniques and the client's new and current promotional activities, • Educate management on how to sell the client’s products and services by directly interacting with their employees and customers in both informal (side-by-side) and formal (classroom) training, • Use personal initiative to create and implement motivational contests, goals, challenges, and incentives to improve sales and respond to low performance as you encounter challenges, • You will provide analysis of visits and sales, make suggestions, and give presentations on methods of increasing sales for the client, • Visit offices regularly, approach those reps who need help, and provide support to increase sales and headcount, • Provide outstanding service to the reps, owners, and customers, demonstrating in-depth product knowledge, • Maintain partner and client presentation standards, deliver exceptional client service, and follow up with all stakeholders, • Build strong relationships with partners in the assigned territory through personal integrity, sales, and business expertise, • Become the EDM business subject matter expert, including technology, plans, promotions, sales techniques, best practices, computer systems, online tools, activation procedures, credit, and escalation processes, • Demonstrate and transfer knowledge through all partner contacts, • Document and quantify opportunities, share best practices with peers, and communicate challenges and recommendations internally to management and the client's key management, • Identify challenges and recommendations in detailed reports submitted online within 24 hours of conducting field activities via the company's web-based reporting system, • Previous experience in sales and leadership within outside sales channels with previous experience as an Account Sales Manager in a fast-paced quota-driven environment, • Previous role as a Direct Manager, Manager, Sales Manager, Area Manager, District Manager, Regional Manager, Business Development Manager, Branch Manager, Manager Trainee, Assistant General Manager, Outside Sales Manager, • Training, • Must be comfortable with 1:1 and classroom-style training, • Operational, • Sales, • Motivation teams, sales reps, • Developing sales skills via action plans, • Motivating and driving others, • Evaluating teams and analyzing data to identify opportunities and build improvement plans, • Exceptional leadership skills with a passion and dedication for mentoring, and coaching sales helping partners to become successful, • Possess strong communication skills, a strong work ethic, high energy, enthusiasm, and a passion for technology, • Ability to thrive in an entrepreneurial, unstructured work environment, • Effective communication, analytical, and presentation skills, • Ability to work flexible hours to participate in evening, weekend, and holiday events, • MS Word, Excel, and PowerPoint, • Experience working with and meeting quotas, • Operational understanding of basic retail business and practices a plus, • Working knowledge of the wireless industry and technology is a plus Schedule • Workweek, • In the field 4-5 days per week including weekends, • Expected to travel 3 weeks per month, • Each month you will work from the home office for 1 week, • Flexible in maintaining client and partner needs, • 50-75%, • Uncapped earning potential, • Earn up to 80K annually!, • Bonus opportunities, • Medical, Dental, Vision, and Life insurance are available on the first day of the month following your first day of employment – no extended waiting period!, • 401k Plan with employer matching, • Paid vacation, personal/sick days, and bereavement time, • Employee Profit Sharing Program, • 50% AT&T wireless discount, • Paid training, • Advancement opportunities, we prefer to promote from within!

Job DescriptionDescription: Join the team shaping the future of healthcare! Medbridge is a dynamic software-as-a-service company working with the country’s largest healthcare providers to build technology solutions that help patients get better faster, while decreasing the overall cost of care. Our Marketing team is looking for an enthusiastic Lifecycle Marketing Manager to join us! We hire in the following states: AZ, CO, CA, FL, ID, GA, IL, NH, KS, MA, MI, MN, NC, NY, OH, OR, PA, SC, TN, TX, UT, VA, WA, WI. We’re looking for a Lifecycle Marketing Manager to own and optimize the end-to-end customer journey. You’ll define how prospects and customers experience Medbridge and build programs that drive engagement, product adoption, retention, and growth. This role is both strategic and hands-on. You’ll partner cross-functionally to turn business priorities into effective lifecycle programs across email, in-product messaging, SMS, and push. Why work at Medbridge? • We are mission driven. At Medbridge, our mission is clear - we want to help everyone move well, feel well, and live well., • You’ll make an impact here. 300,000+ clinicians use our products daily, impacting millions of patients. In this role, you help create experiences that impact these important leaders., • Our customers love Medbridge! We work with 9 of the top 10 Private Practice and hospital systems nationwide, and 6 of the top 10 home health organizations. We have a nearly 100% client retention rate and are continuing that work in 2026 and beyond.In this role, you will:, • Own the Customer Journey: Manage and strengthen lifecycle touchpoints from prospect through expansion, defining key moments that drive activation, adoption, and retention., • Develop Lifecycle Strategy: create segmentation frameworks and behavior-based programs that improve engagement and lifetime value., • Execute & Optimize Campaigns: Plan, build, and optimize automated campaigns across email, in-app, SMS, and push to support product initiatives and feature launches., • Leverage Data to Drive Decisions: Monitor performance, analyze user behavior, and use insights to improve targeting, messaging, and overall program effectiveness., • Scale Through Automation & AI: Use automation and AI tools to improve workflows, reporting, and campaign development., • Partner Cross-Functionally: Work closely with Product, Sales, and Account Management to align lifecycle programs with company goals and priorities., • Improve Signal & Reduce Noise:Continuously refine communications to ensure relevance, clarity, and value across all touchpoints.Requirements:, • 4–6+ years in lifecycle, CRM, or growth marketing, ideally in a SaaS or subscription business., • Strong experience building and optimizing multi-channel lifecycle programs., • Hands-on experience with marketing automation platforms (e.g., HubSpot), CRMs (e.g., Salesforce), and in-product messaging tools (e.g., Pendo)., • Comfortable working with lifecycle metrics and using data tools (e.g., Tableau, PostHog) to measure and improve performance., • Experience using AI tools to support process improvement, campaign creation, personalization, or testing., • Strong communication and project management skills with experience working across teams.Nice to Have:, • Experience in healthcare or healthcare technology, • Fluent in marketing or revenue operations, including data structures and integrationsWho You Are:, • Strategic and execution-oriented—you can plan and build, • Accountable—you take ownership and follow through, • Collaborative—you work effectively across teams Excellence: A job worth doing is a job worth doing RIGHT. • We believe that excellence is never an accident. It’s the result of high intention, sincere effort, and intelligent execution., • We are change-makers who push the boundaries of what is possible, continually reimagining patient care., • We realize that our work impacts people’s health and demands that we hold ourselves to the highest possible standards., • We know a good thing when we see it; when exceptional talent comes our way, we hire them and help them grow., • We embrace ambitious and challenging projects with confidence in our ability to achieve them together., • We are courageous as we venture into the unknown., • We persevere in the face of difficulties., • We do not let perfection be the enemy of progress; we focus on taking the next best step forward., • We care deeply about our colleagues, customers, and patients, ensuring our work at Medbridge has a lasting impact., • We take a multi-disciplinary, data-oriented approach to solving problems., • We lead with confidence and humility, embracing a servant-leadership mindset as we support and challenge one another to reach our shared goals. At Medbridge, salary ranges are assigned to a job based on 3rd party salary benchmark surveys. Individual pay within this range is informed by the candidate's skills, capabilities and experience. We embrace diversity and are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. No matter your background, your orientation, your identity expression, or whatever else makes you unique, if you want to raise the bar and join an amazing team of passionate people, then we'd love to work alongside you at Medbridge. Now it’s your turn. If you liked what you’ve read and think Medbridge would be a great career choice for you, apply now and our Talent Acquisition team will follow up with you shortly after. Requirements:

Job DescriptionJob Title: CNC Programmer Job Description We are seeking an advanced CNC Programmer to support our high-mix prototype and production shop. This role involves delivering complete manufacturing packages, including NC code, setup sheets, and simulation files, for 3-axis, 5-axis, and mill-turn machines. Responsibilities • Develop optimized NC code for 3-axis, 5-axis, and mill-turn operations., • Create detailed setup sheets with tooling, fixturing, and work offset information., • Generate simulation files to verify programs before release to production., • Deliver complete manufacturing packages ready for floor execution., • Design custom fixtures and workholding solutions for complex parts., • Optimize workholding strategies for efficiency and part quality., • Collaborate with machinists on fixture implementation and refinement., • Select appropriate cutting tools, speeds, and feeds for optimal performance., • Balance cycle time reduction with tool life and part quality., • Support prototype-to-production transitions with scalable programming solutions., • Work closely with manufacturing engineers and machinists., • Troubleshoot programming issues and implement corrective actions., • Provide technical guidance on machining capabilities and limitations.Essential Skills, • 8 years of advanced CNC programming experience., • Expert-level workholding and fixture design capabilities., • Proficiency programming 3-axis, 5-axis, and mill-turn machines., • Ability to deliver complete manufacturing packages: NC code, setup sheets, and simulation files., • Strong understanding of machining processes, tooling, and cutting strategies.Additional Skills & Qualifications, • Experience working in ISO 9001 certified environments., • Mastercam programming software experience., • ESPRIT programming software experience.Why Work Here? Join a dynamic and innovative environment where you can apply your advanced CNC programming skills and collaborate with a team of dedicated professionals. Experience the satisfaction of supporting prototype-to-production transitions and optimizing processes for efficiency and quality. Work Environment The work environment includes operating advanced CNC machines such as 3-axis, 5-axis, and mill-turn machines. You will have the opportunity to work closely with both machinists and manufacturing engineers, fostering a collaborative and supportive atmosphere. Job Type & Location This is a Contract to Hire position based out of Seattle, WA. Pay and Benefits The pay range for this position is $56.00 - $60.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionEmployee Benefits & Executive Compensation Associate Attorney Atlanta, GA; Austin, TX; Baltimore, MD; Boston, MA; Chicago, IL; Dallas, TX; Houston, TX; Los Angeles, CA; Miami, FL; Minneapolis, MN; New York, NY; Palo Alto, CA; Philadelphia, PA; Phoenix, AZ; Raleigh, NC; Reston, VA; San Diego, CA; San Francisco, CA; Seattle, WA; Short Hills, NJ; Washington, DC; Wilmington, DE Direct Counsel is seeking an Employee Benefits & Executive Compensation Associate Attorney to join a leading Am Law firm’s nationally recognized Tax/Corporate practice. This opportunity is ideal for an attorney with 3+ years of applicable corporate or executive compensation experience, particularly someone interested in working on sophisticated private equity and M&A-driven compensation and benefits matters. The ideal candidate will have strong experience advising on equity plans, executive compensation arrangements, retention and incentive packages, retirement and welfare plans, and employee benefits issues arising in mergers and acquisitions, with a particular emphasis on private equity transactions. This role offers substantive deal involvement, close collaboration with corporate deal teams, and meaningful client-facing responsibility in a highly strategic practice. Key Responsibilities • Advise on employee benefits and executive compensation matters in complex transactions, • Support private equity, M&A, and other strategic corporate transactions, • Draft and negotiate equity plans, award agreements, executive employment agreements, and retention packages, • Counsel clients on retirement plans, welfare plans, and incentive compensation arrangements, • Conduct legal research and analysis related to ERISA, tax, securities, and executive compensation issues, • Assist with transaction diligence, structuring, and closing support, • Advise on employee benefits and compensation issues in change-of-control and sponsor-backed transactions, • Work collaboratively with corporate, tax, labor, and private equity teams, • Participate directly in client calls, negotiations, and strategic planning discussions, • Stay current on legal developments affecting benefits, compensation, and transactional structuresQualifications, • 3+ years of relevant corporate, employee benefits, or executive compensation experience, • Strong interest in executive compensation and employee benefits law, • Experience with equity compensation, executive retention, and incentive structures, • Familiarity with benefits and compensation issues in M&A and private equity transactions, • Am Law 100 experience preferred, • Excellent research, drafting, analytical, and communication skills, • Strong organizational skills and attention to detail, • Sound business judgment and client management ability, • Ability to thrive in a fast-paced, collaborative environment, • JD from an accredited law school

Job Description Position Overview: A leading manufacturing solutions provider is seeking a highly experienced CNC Applications Engineer with a strong background in part processing, Fanuc CNC controls, and CAM programming using Mastercam or Esprit. This role is crucial in supporting process development, machine optimization, and technical customer support for high-precision machining operations. Key Responsibilities: • Part Processing Development:, • Interpret part drawings and develop comprehensive machining strategies including tooling, workholding, and efficient operation sequencing., • CNC Programming & Optimization:, • Generate, modify, and refine CNC programs using G-code, M-code, and CAM-generated output, ensuring high accuracy and process efficiency., • Fanuc Controls Expertise:, • Troubleshoot, configure, and fine-tune programs and operations on Fanuc-controlled CNC equipment., • Technical Customer Support:, • Provide remote and on-site support to customers for troubleshooting, training, and process validation during installations and upgrades., • Machine Setup & Validation:, • Assist with machine setup, prove-outs, and first-article inspections to ensure part accuracy and adherence to specifications., • CAM Software Utilization:, • Create toolpaths and NC code using CAM software (preferably Mastercam or Esprit) for a variety of CNC machines including multi-axis., • Process Improvement:, • Identify and implement opportunities to reduce cycle times, enhance surface finishes, and extend tool life through process refinement., • Documentation:, • 5–10 years of experience in CNC machining, part processing, and programming., • Strong working knowledge of Fanuc CNC controls and G/M code., • Proficiency in CAM software (preferably Mastercam or Esprit)., • Deep understanding of machining practices, tooling, speeds/feeds, and materials., • Ability to collaborate across teams and support customer-facing technical work., • Strong communication and documentation skills., • Experience with multi-axis CNC machines and turning centers., • Exposure to automation and robotics in CNC manufacturing environments., • Combination of office-based engineering and hands-on work on the shop floor., • Competitive compensation and performance-based bonuses, • Medical, Dental, and Vision insurance, • Paid Time Off (PTO), • 401(k) with company match, • Support for continuing education and training, • Clear opportunities for career advancement in a fast-paced technical environment

Job Description Hazel Health and Little Otter have joined forces to expand access to high-quality, comprehensive care for children and families nationwide. Hazel partners with school districts and health plans to make physical and mental health care more accessible to K–12 students. Our licensed providers deliver virtual therapy and medical services to more than four million students, at school or at home, regardless of insurance status or ability to pay. Our goal is simple: remove barriers so every child can thrive. Helping students and families feel better takes a dedicated team. As a member of Hazel's Mental Health team, you will help expand access to evidence-based care in schools across Washington. The Role We are seeking independently licensed therapists in Washington who are passionate about working with children and families. In this role, you will provide high-quality virtual mental health services to students within our partner school districts and health plans. You will collaborate with families, school staff, and other stakeholders to ensure coordinated, accessible care. Schedule Minimum 10 client caseload with sessions during Washington peak hours: Monday–Friday, 9:00am–6:00pm PT What You'll Do • Provide evidence-based teletherapy to children (ages 0–17) and their families, • Deliver interventions such as CBT, Exposure Therapy for Anxiety, PMT, PCIT, CPP, and other evidence-based modalities, • Complete timely and accurate clinical documentation (intakes, treatment plans, progress notes) using our platform, • Participate in optional weekly case consultation and team meetingsMinimum Qualifications, • Master's-level therapist independently licensed in Washington (LMFT, LICSW, LMHC, or equivalent), • Clinical experience providing psychotherapy to children and families, • Demonstrated experience treating common pediatric mental health conditions using evidence-based approaches, • Comfortable delivering care virtually and using technology in clinical practice, • 12 company holidays, • Accrued Sick Time, • 401k program, • EAP Applicants must reside in (or relocate to) one of these states prior to employment. State eligibility may change based on hiring needs. Equal Opportunity Hazel Health is committed to building a diverse, inclusive, and equitable workplace. We value the experiences and perspectives of people from all backgrounds. Hazel considers qualified applicants with arrest or conviction records in accordance with applicable laws. A background check is required following a contingent offer of employment.

Job DescriptionProjects & Energy Finance Of Counsel Locations: New York, NY | Atlanta, GA | Austin, TX | Baltimore, MD | Boston, MA | Chicago, IL | Dallas, TX | Houston, TX | Los Angeles, CA | Miami, FL | Minneapolis, MN | Palo Alto, CA | Philadelphia, PA | Phoenix, AZ | Raleigh, NC | Reston, VA | San Diego, CA | San Francisco, CA | Seattle, WA | Short Hills, NJ | Washington, DC | Wilmington, DE Direct Counsel is seeking a Projects & Energy Finance Of Counsel to join a prestigious Am Law 100 firm. This role will focus on energy transition financing matters and is available in multiple U.S. offices. The position provides the opportunity to work on internationally recognized projects, including cutting-edge financing deals in the energy transition sector. Key Responsibilities: • Counsel clients on complex energy transition finance transactions, including financing and M&A of energy projects and companies., • Structure and negotiate tax equity financing and renewable energy tax credit monetization matters., • Collaborate with financial institutions, investors, and corporate clients to develop innovative financing solutions., • Provide regulatory guidance on structured finance in the energy sector., • Manage transaction lifecycles from due diligence to deal execution., • Work alongside multi-disciplinary teams to support energy and infrastructure clients.Qualifications:, • Education: JD from an accredited law school., • Bar Admission: Licensed to practice in the jurisdiction where you are applying., • Experience: Minimum 9 years of experience in energy transition finance matters., • Prior experience handling tax equity and renewable energy tax credit monetization is required., • Experience at an Am Law 100 firm preferred., • Strong analytical, writing, and business judgment skills., • Excellent organizational, communication, and management abilities., • Ability to work collaboratively within a fast-paced environment.Work Environment:, • Hybrid: Regular in-office presence with flexibility for remote work.Compensation & Benefits:, • Expected hiring range: $450,000 - $550,000 per year, depending on experience and location.

Job DescriptionProjects & Energy Finance Attorney (Infrastructure) Of Counsel Locations: New York, NY | Atlanta, GA | Austin, TX | Baltimore, MD | Boston, MA | Chicago, IL | Dallas, TX | Houston, TX | Los Angeles, CA | Miami, FL | Minneapolis, MN | Palo Alto, CA | Philadelphia, PA | Phoenix, AZ | Raleigh, NC | Reston, VA | San Diego, CA | San Francisco, CA | Seattle, WA | Short Hills, NJ | Washington, DC | Wilmington, DE Direct Counsel is seeking an experienced Projects & Energy Finance (Infrastructure) Of Counsel to join a prestigious Am Law 100 firm. This role offers an opportunity to work on high-profile financing transactions, including energy transition and digital infrastructure projects. The position is open to candidates in any of the firm’s U.S. offices. Key Responsibilities: * Advise clients on project finance and related transactions, with a focus on energy transition and digital infrastructure projects, including data centers. * Draft, review, and negotiate loan and security agreements, project finance documentation, and other financing instruments. * Coordinate complex deal structures and closings. * Provide strategic legal counsel to clients on regulatory, financial, and risk management considerations in project finance matters. * Collaborate with cross-functional teams to support large-scale financing deals. Qualifications: * J.D. from an accredited law school. * Admission to practice in the jurisdiction where applying. * Minimum of 9 years of experience in project finance or other financings relating to energy transition or digital infrastructure. * Extensive experience drafting and negotiating loan and security documentation. * Strong knowledge of financial structures related to energy and infrastructure projects. Key Skills & Competencies: * Strong analytical and problem-solving abilities. * Excellent drafting, negotiation, and communication skills. * Ability to work collaboratively with clients, legal teams, and stakeholders. * Detail-oriented with strong organizational skills. * Ability to manage multiple priorities in a fast-paced environment. Work Environment: * Hybrid: Regular in-office presence with some flexibility for remote work. Compensation & Benefits: * Expected hiring range: $450,000 - $525,000 per year, based on geographic location and candidate qualifications. * Comprehensive benefits package, including medical, dental, vision, and 401(k). This is a unique opportunity to join a top-tier legal team specializing in high-value infrastructure and energy finance matters. If you are interested in learning more, apply today!

Job Description ISCAR METALS, INC., a dynamic and innovative cutting tool company, has an immediate opening for a Technical Applications/Sales Representative in Washington for the Greater Seattle Area. Preferred candidates will have a minimum of 3-5 years machining & industrial sales experience but we are always willing to train the right individual that has a “can do” attitude. CNC programming experience and a college degree (engineering/industrial focus) is a plus. Like machining? Like optimizing a machine shop process with the best in class cutting tool products? Do you like to compete? If yes, join us in our quest to be #1. Visit us BENEFITS WE OFFER • Competitive Salary, • Health, Dental and Vision plan, • 401K Retirement Plan, • Paid Vacation, Holiday and Sick time, • Life and Disability InsuranceCompany DescriptionCelebrating over 65 years of innovation, Iscar is a full- line ISO9001, ISO14001, ISO18001 and QS9000 certified manufacturer and supplier of precision carbide metalworking tools. As a result of its high quality and original products, this multinational company is a world leader in supplying metal removal products to major industries, including automotive, aerospace, mold and die and a variety of mass production industries. Iscar continues to provide the most economical solutions for the metalworking industry. Iscar is currently represented in over 52 countries worldwide. Iscar's growth continues as a result of innovation and providing its customers with the very latest, most efficient metal cutting technology in the world. Our USA Headquarters, located in Arlington, Texas, houses our national distribution and customer service centers. Our Machining Knowledge Centers, located in Arlington, TX and Charlotte, NC host new tooling technology and specialty seminars and demonstrations throughout the year. Iscar promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive market place. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package. Iscar Metals is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.Celebrating over 65 years of innovation, Iscar is a full- line ISO9001, ISO14001, ISO18001 and QS9000 certified manufacturer and supplier of precision carbide metalworking tools. As a result of its high quality and original products, this multinational company is a world leader in supplying metal removal products to major industries, including automotive, aerospace, mold and die and a variety of mass production industries. Iscar continues to provide the most economical solutions for the metalworking industry. Iscar is currently represented in over 52 countries worldwide.\r\n\r\nIscar's growth continues as a result of innovation and providing its customers with the very latest, most efficient metal cutting technology in the world.\r\n\r\nOur USA Headquarters, located in Arlington, Texas, houses our national distribution and customer service centers. Our Machining Knowledge Centers, located in Arlington, TX and Charlotte, NC host new tooling technology and specialty seminars and demonstrations throughout the year.\r\n\r\nIscar promotes creative thinking and productive teamwork to achieve its business objectives within today’s competitive market place. Come join our team, where innovation never stops, and job satisfaction is our goal. Iscar provides a full compensation package. Iscar Metals is an Equal Employment Opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, age, gender, sexual orientation, gender identity, religion, national origin, protected veteran status, disability, genetic information, or any other characteristic protected by law.

Job DescriptionDescription: Join the team shaping the future of healthcare! Medbridge is a dynamic software company working with the country’s largest healthcare providers to build technology solutions helping patients get better faster, while decreasing the overall cost of care. Our Development team is growing and looking for an enthusiastic Software Engineer III to join us! We hire in the following states: AZ, CO, FL, ID, GA, IL, NH, KS, MA, MI, MN, NC, NY, OH, OR, PA, SC, TN, TX, UT, VA, WA, WI. We’re looking for a Software Engineer III to join our growing Patient Reported Outcomes team. This role is ideal for someone who thrives in a collaborative environment. In this role you will push Medbridge forward into our future as an insights company, driving outcomes for patients, clinicians and organizations alike. You will champion a strong engineering culture and advocate for best practices, making an impact across the entire organization. Why work at Medbridge? • We are mission driven. At Medbridge, our mission is clear - we want to help everyone move well, feel well, and live well., • You’ll make an impact here. 300,000+ clinicians use our products daily, impacting millions of patients. In this role, you help create experiences that impact these important leaders., • Design, develop, and maintain scalable, reliable, and secure software solutions within the Medbridge platform., • Integrate AI-powered features and services into existing products, including natural language processing, predictive analytics, and intelligent automation solutions., • Collaborate with cross-functional teams, including product managers, designers, data scientists, and other engineers, to define and implement new features., • Ensure code quality through rigorous testing, code reviews, and adherence to best practices, including AI model validation and performance monitoring., • Continuously improve software engineering practices, processes, and tools to enhance team productivity and product quality., • 5+ years of professional software engineering experience, with a strong focus on SaaS applications and web services., • 2+ years of experience contributing to the architecture and design (architecture, design patterns, reliability, and scaling) of new and existing web applications., • Experience with front-end and back-end technologies, including languages like Go, PHP, TypeScript and frameworks like Angular and Laravel., • Experience and strong proficiency with MySQL or other relational databases, • Hands-on experience integrating AI/ML services (e.g., OpenAI, Claude API, AWS Bedrock, Azure AI) into production applications is a plus., • Experience with cloud platforms (e.g., AWS, Azure, Google Cloud) and containerization technologies (e.g., Docker, Kubernetes), • Strong communication and collaboration skills, with the ability to work effectively in a team-oriented environment and translate AI capabilities into business value., • Experience in writing and maintaining unit, integration, and end-to-end tests to ensure software quality and reliability, including AI model testing and validation. Excellence: A job worth doing is a job worth doing RIGHT. • We believe that excellence is never an accident. It’s the result of high intention, sincere effort, and intelligent execution., • We are change-makers who push the boundaries of what is possible, continually reimagining patient care., • We realize that our work impacts people’s health and demands that we hold ourselves to the highest possible standards., • We know a good thing when we see it; when exceptional talent comes our way, we hire them and help them grow., • We embrace ambitious and challenging projects with confidence in our ability to achieve them together., • We are courageous as we venture into the unknown., • We persevere in the face of difficulties., • We do not let perfection be the enemy of progress; we focus on taking the next best step forward., • We care deeply about our colleagues, customers, and patients, ensuring our work at Medbridge has a lasting impact., • We take a multi-disciplinary, data-oriented approach to solving problems., • We lead with confidence and humility, embracing a servant-leadership mindset as we support and challenge one another to reach our shared goals. At Medbridge, salary ranges are assigned to a job based on 3rd party salary benchmark surveys. Individual pay within this range is informed by the candidate's skills, capabilities and experience. We embrace diversity and are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. No matter your background, your orientation, your identity expression, or whatever else makes you unique, if you want to raise the bar and join an amazing team of passionate people, then we'd love to work alongside you at Medbridge. Now it’s your turn. If you liked what you’ve read and think Medbridge would be a great career choice for you, apply now and our Talent Acquisition team will follow up with you shortly after. Requirements:

Job DescriptionJob Title: Field Service Engineer Position available in: Seattle, WA Job Type: Full time Positions Available: 2 Broetje Automation is the world’s leading expert & OEM in aircraft manufacturing automation and robotics, working with the top names in our industry. Worldwide locations include: Germany, USA, France, United Kingdom, China, and Japan. US locations include: Charleston (SC), Savannah (GA), Wichita (KS), and Seattle (WA). Compensation/Benefits: • Competitive hourly wage, ranges $34.00 – 43.00/hour, plus overtime & shift differential, • 6% 401(k) company match, no vesting period, • 100% paid healthcare coverage (medical, dental, vision), • Disability plan & group life insurance program, • 3 weeks Paid Time Off (PTO) plus 13 paid holidays, including 3 floating holidays, • Tuition reimbursement program, up to $10,000/yr, • BS in Electrical, Controls, Mechatronics, or Electro-Mechanical Engineering preferred, or comparable experience with industrial robotics or machine tools., • Technical Certificate OR BS in Electrical/Mechanical Engineering, and 3+ years of experience within the industrial automation industry or equivalent experience., • Strong mechanical aptitude from prior professional experience., • Siemens Step 7 PLC troubleshooting experience, • Siemens TIA Portal; Sinumerik One, • CNC troubleshooting experience, • Experience in IEC61131 (PLC programming languages), • Strong fundamental understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, robotics, programming, and system integration, • Understanding of PLC programming languages, • Experienced in troubleshooting electrical control panels, • CNC troubleshooting experience, • Knowledge of NC Controllers: Siemens 840D or WINCC, • Experience using precision measurement equipment (i.e. Dial indicators, calipers, etc., • Strong communication skills & ability to interact with teams, clients, and vendors, • Willing to travel to customer sites (50-70% travel expected), • Must be able and willing to work weekends (OVERTIME), • Experience with aerial platforms and working at heights, • Ability to lift and move materials or equipment weighing up to approximately 40 lbs, • Provide electrical and controls engineering expertise in support of new equipment & system introductions, • Internal subject matter expert in control systems (Siemens PLC, HMI, Motion Control Systems), system integration, sensors, & electromechanical devices, • Apply knowledge of electronics, electrical circuits, mechanics, pneumatics, hydraulics, and programming, • Travel to customer sites for machine commissioning and troubleshooting support Powered by JazzHR nWaYUUedJi

Job DescriptionDescription: Join the team shaping the future of healthcare! Medbridge is a dynamic software-as-a-service company working with the country’s largest healthcare providers to build technology solutions that help patients get better faster, while decreasing the overall cost of care. Our Content team is looking for an enthusiastic Editorial Lead (Copy & Content) to join us! We hire in the following states: AZ, CO, CA, FL, ID, GA, IL, NH, KS, MA, MI, MN, NC, NY, OH, OR, PA, SC, TN, TX, UT, VA, WA, WI. The Editorial Lead (Copy & Content) is responsible for overseeing the schedule of a team of external quality control copy editors and ensuring that the highest quality content is produced for our customers. This role's primary objective is to ensure the utmost quality and consistency in our content, including copy editing, ensuring quality standards are met, and achieving the right tone and voice. This individual will spearhead AI-driven initiatives to implement AI tools in the conception and drafting phases of content. The Editorial Lead (Copy & Content) must be skilled in copy editing/writing, project management, and be able to work on multiple projects simultaneously. Why work at Medbridge? • We are mission driven. At Medbridge, our mission is clear - we want to help everyone move well, feel well, and live well., • You’ll make an impact here. 300,000+ clinicians use our products daily, impacting millions of patients. In this role, you help create experiences that impact these important leaders., • Copy edit content, including high-priority, fast turnaround requests, • Update copy editing documentation and guidelines to ensure Medbridge content is the highest quality and the company is up-to-date on the latest style standards, • Work closely with the Post-Producer Manager to ensure copy editor contractors are operating efficiently and meeting quality standards, • Oversee copy editor contractors and assign content ready to be reviewed so it meets deadlines, • Collaborate with department leads and managers to identify areas of quality improvement for different product offerings, • Maintain department tools like Grammarly and find ways to innovate the course quality review process, • Create scalable AI tools to support the editorial and QC process Qualifications / Competencies: • At least 3 years of copy editing and/or writing experience, • Proficient with Google Suite and Microsoft Office, • Demonstrated experience with AI tools, • Bachelor's degree or equivalent experience, • Excellent organizational skills, • Strong attention to detail Excellence: A job worth doing is a job worth doing RIGHT. • We believe that excellence is never an accident. It’s the result of high intention, sincere effort, and intelligent execution., • We are change-makers who push the boundaries of what is possible, continually reimagining patient care., • We realize that our work impacts people’s health and demands that we hold ourselves to the highest possible standards., • We know a good thing when we see it; when exceptional talent comes our way, we hire them and help them grow., • We embrace ambitious and challenging projects with confidence in our ability to achieve them together., • We are courageous as we venture into the unknown., • We persevere in the face of difficulties., • We do not let perfection be the enemy of progress; we focus on taking the next best step forward., • We care deeply about our colleagues, customers, and patients, ensuring our work at Medbridge has a lasting impact., • We take a multi-disciplinary, data-oriented approach to solving problems., • We lead with confidence and humility, embracing a servant-leadership mindset as we support and challenge one another to reach our shared goals. At Medbridge, salary ranges are assigned to a job based on 3rd party salary benchmark surveys. Individual pay within this range is informed by the candidate's skills, capabilities and experience. We embrace diversity and are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. No matter your background, your orientation, your identity expression, or whatever else makes you unique, if you want to raise the bar and join an amazing team of passionate people, then we'd love to work alongside you at Medbridge. Take the Next Step If you’re excited about this opportunity and think Medbridge is the right fit for your career, apply now! Our Talent Acquisition team will follow up with you shortly. Please note: Depending on location, final round interviews may be conducted in person. Requirements:

Job Details Division: Pharmaceutical Project Location(s): Raleigh, NC 27601 USA Minimum Years Experience: (none) Travel Involved: 70-80% Job Type: Regular Job Classification: Experienced Education: (none) Job Family: Construction Compensation: Salaried Exempt *** This position is

Job DescriptionRenuity 1099 Installer Earn up to $200k/yr The home improvement industry is broken. Renuity is here to fix it. We’ve united seven of the most trusted home renovation companies in America under one powerful brand – Renuity. Together we’re on a mission to revolutionize home improvement, making it faster, easier, and stress-free to upgrade your home inside and out. Whether it’s a new bath, a custom closet, or exterior upgrades, we help people create homes they love – without the hassle. With expert teams in 36 states and counting, there’s probably a Renuity home in your neighborhood. And we’re just getting started. If you’re ready to build the future of home improvement, join us. What We Offer * Guaranteed year-round work * Annual income of $150 - $200k * Flexible schedule * All work provided * Product reimbursement About the Role * Install Kohler LuxStone products according to Renuity standards and procedures * Apply finish work as needed for every application * Communicate with management at the end of an installation to ensure customer satisfaction and authorize final payments * Complete job checklist with homeowner at completion * Treat each homeowner and their property with the utmost respect Key Qualifications * 3 years of Remodeling, carpentry or construction experience * Knowledge of Residential Acrylic Baths, Stone Panels, or Walk-in Tubs * Established LLC or Business * Must have General Liability and Worker Compensation Insurance * Cargo Van, SUV, or truck capable of pulling a trailer * Must have trailer About Renuity Renuity, headquartered in Charlotte, NC, is a leading home improvement services business with a rapidly expanding national footprint. Renuity currently operates across 36 states and has created hundreds of thousands of happier homeowners across the United States who have chosen Renuity for their home improvement needs. Renuity is redefining the home improvement experience with a focus on trust, innovation and customer-first service. To learn more, visit Renuity's About Us page. Renuity and its affiliates are committed to equal opportunity. We value and embrace diversity and inclusion of all Team Members. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact . If you have a question regarding your application, please contact To access Renuity's Privacy Policy, please click here: Privacy Policy Compensation Range: $150K - $300K

IT RECRUITER / TALENT ACQUISITION SPECIALIST FuntoNetwork IT Consulting Empowering Businesses with Innovative IT Solutions Position: IT Recruiter / Talent Acquisition Specialist Department: Human Resources & Talent Acquisition Location: Remote (USA) / Charlotte, NC Preferred Type: Full-Time, Exempt

Job DescriptionLooking for a Flexible Telemedicine job where you can work from home and control your schedule? We’re seeking skilled clinicians with multiple state licenses to provide virtual care primarily in the medical weight loss OR urgent care space. ***If you do not have at least 3 or more active state licenses as well as experience prescribing compounded GLP-1s for weight loss OR recent urgent care experience - please Do not apply What’s in it for you: * Flexible Schedule: 1099 Independent Contractor - Work 20-40 hours/week. Choose your hours and adjust them as needed. * Competitive Pay: Up to $120 per hour, depending on type of visits completed * Fully Remote: Deliver care through video, phone, and chat. * Added benefits: Malpractice insurance and collaborating physicians provided Requirements: * Licensure: We have needs in all states! Active non-restrictive APRN licensure in 3 states minimum (highest need states: CA, TX, FL, NY, VA, NC, WA, OH, PA, GA). * Experience: 3+ years of NP Experience. Must have recent urgent care experience OR experience prescribing compounded GLP-1s for weight loss * Board Certification: ANP, FNP, AGNP (must be able to see all patients 18+) * Availability: Ability to work 20 hours per week. Must be available for 2 weekend shifts per month Take your career to the next level in telemedicine. Apply today!

Job DescriptionBenefits: • Free uniforms, • Opportunity for advancement Life's too short to not work someplace awesome! If you have tons of energy, love kids and are looking for a way to give back to your community, you may be the person we are looking for! Schedule • Monday Afternoon - Required, • Thursday Afternoon - Required, • Friday Afternoon - Future Growth Opportunity, • Weekends - RequiredWhat we expect from you..., • Teach amazing classes and lead fabulous birthday parties based on our proven curriculum and teaching method (don't worry, we'll teach you how!), • Be part of a team of instructors who teach classes and run birthday parties on the weekends., • Coordinate all aspects of birthday parties with families who are hosting at our facility and make sure they have a truly magical experience!, • Provide outstanding customer service and membership experience. We treat our members like family here., • Be ready to LEAD. We will make a positive impact on the growth and development of the children and families of our community! But we also make a difference in the lives of our teammates! Many of the leaders in our company started in this position and have enjoyed the opportunities for upward mobility.You'd fit in here if..., • You're totally open to being a goofball and love giving (air) high 5's. (A background in child development, physical education and /or gymnastics helps as well)., • You have background in gymnastics, dance, early childhood development or education., • You live to serve! Making others feel good makes you feel good., • Kids really like you AND their parents really like you too., • You were voted most likely to be in a good mood by your high school classmates., • You love to have fun but you know when to buckle down and do work.You may think we're awesome because..., • Kids and Parents Walk out of our classes more confident than when they walked in every single day., • You'll get your steps in and close your activity rings while you work because you'll be moving all day., • We take our fun pretty seriously but also take the role we play in our community and with each child we meet seriously. The relationships you'll build here will last a lifetime. For over 40 years, our trained instructors have nurtured happy, confident kids through parent/child classes, gymnastics, dance and enjoyable extras like camps, Parents Survival Nights, skill clinics and Awesome Birthday Bash parties. Once you become a part of The Little Gym squad, you will be part of a team dedicated to the growth and development of children all over the globe. All associated locations are independently owned and operated by a franchisee. Your application will go directly to the franchise Somersault Operating, and all hiring decisions will be made by the management of that Somersault Operating. All inquiries about employment at this franchise should be made directly to Somersault Operating, and not to The Little Gym Franchising Corporate. Somersault Operating currently has 30 The Little Gym locations spread across 8 states (SC, NC, VA, TN, PA, NJ, WA, CA). With multiple new locations scheduled to open in the coming years, Somersault Operating looks forward to having you helping us grow!

Job DescriptionBenefits: • Free uniforms, • Opportunity for advancement Life's too short to not work someplace awesome! If you have tons of energy, love kids and are looking for a way to give back to your community, you may be the person we are looking for! Schedule • Monday - Friday (no Thursday) - 8:30am - 1pm, • Sunday - Full Day - Required, • 15-25 weekly hoursWhat we expect from you..., • Teach amazing classes and lead fabulous birthday parties based on our proven curriculum and teaching method (don't worry, we'll teach you how!), • Be part of a team of instructors who teach classes and run birthday parties on the weekends., • Coordinate all aspects of birthday parties with families who are hosting at our facility and make sure they have a truly magical experience!, • Provide outstanding customer service and membership experience. We treat our members like family here., • Be ready to LEAD. We will make a positive impact on the growth and development of the children and families of our community! But we also make a difference in the lives of our teammates! Many of the leaders in our company started in this position and have enjoyed the opportunities for upward mobility.You'd fit in here if..., • You're totally open to being a goofball and love giving (air) high 5's. (A background in child development, physical education and /or gymnastics helps as well)., • You have background in gymnastics, dance, early childhood development or education., • You live to serve! Making others feel good makes you feel good., • Kids really like you AND their parents really like you too., • You were voted most likely to be in a good mood by your high school classmates., • You love to have fun but you know when to buckle down and do work.You may think we're awesome because..., • Kids and Parents Walk out of our classes more confident than when they walked in every single day., • You'll get your steps in and close your activity rings while you work because you'll be moving all day., • We take our fun pretty seriously but also take the role we play in our community and with each child we meet seriously. The relationships you'll build here will last a lifetime. For over 40 years, our trained instructors have nurtured happy, confident kids through parent/child classes, gymnastics, dance and enjoyable extras like camps, Parents Survival Nights, skill clinics and Awesome Birthday Bash parties. Once you become a part of The Little Gym squad, you will be part of a team dedicated to the growth and development of children all over the globe. All associated locations are independently owned and operated by a franchisee. Your application will go directly to the franchise Somersault Operating, and all hiring decisions will be made by the management of that Somersault Operating. All inquiries about employment at this franchise should be made directly to Somersault Operating, and not to The Little Gym Franchising Corporate. Somersault Operating currently has 30 The Little Gym locations spread across 8 states (SC, NC, VA, TN, PA, NJ, WA, CA). With multiple new locations scheduled to open in the coming years, Somersault Operating looks forward to having you helping us grow!

Job DescriptionPosition Description:The CQV Senior Project Manager is responsible for leading services delivered to life sciences clients in all aspects of CQV-project execution and capital project Operational Readiness. Skills and Characteristics Required:- Significant experience in Project Management Principles and Practices- Demonstrated experience in successful Project Management processes- Expert in project execution throughout the entire project lifecycle- Intimately familiar with Project Planning, Initiation, Execution and Closeout requirements- Expertise in Project Risk Analysis- Mastery of skills in Stakeholder Engagement, Communications Management and Planning, and the various tools utilized by a successful Project Manager- Capable of translating Project Management execution to CAI’s Operational Readiness Model-Skilled in applying situational leadership to appropriately manage project resources, allocate time-budgets, check and adjust Requirements include:Position Requirements:10+ years of industry experience in Commissioning, Qualification, and Validation and/or Computer Systems Validation and related technical areasDemonstrated experience in successful project management processes, along with being an expert in project execution throughout the entire project lifecycle.Communicate impact on budget due to changes in scope and schedule. Understanding of Earned Value Management Other Requirements:Fluent in English Excellent oral and written communication skillsAble to travel domestically and internationally as required US Candidates must have been vaccinated or willing to be vaccinated for COVID-19 prior to starting employment About CAICAI is a 100% employee-owned company established in 1996 that has grown to more than 800 people worldwide. We provide commissioning, qualification, validation, start-up, project management and other consulting services associated with operational readiness to FDA regulated and other mission-critical industries. Are You Ready?Our approach is simple; we put the client’s interests first, we do not stop until it is right, and we will do whatever it takes to get there.As owners of CAI, we are committed to living our Foundational Principles, both professionally and personally:We act with integrity.We serve each other.We serve society.We work for our future. With employee ownership, one person’s success is everyone’s success; we work diligently to accomplish team goals. We place Team Before Self, demonstrate Respect for Others, and possess a Can-Do Attitude (our core values). That is how we have grown exponentially. BenefitsOur full-time positions offer competitive compensation and benefits which include up to 15% retirement contribution, PTO and sick days, health insurance at extremely low cost to employee, financial support for both internal and external professional education as well as 70% long term disability paid for by the company.#LI-MV1Average base salary range, not including benefits. CAI Benefits:•Comprehensive Health Insurance coverage•24 days of Paid Time Off•ESOP/401K - 15% Company Contribution (US Only)•Company paid Life Insurance•Company paid Long Term DisabilityPreference will be given to candidates currently located in Boston, MA, Raleigh, NC, Indianapolis, IN, San Diego, CA, San Francisco, CA, Seattle, WA, and Portland, OR. We are an equal opportunity employer; we are proud to employ veterans and promote diversity and inclusion in our workplace. Diversity is a strength for our global company. We pledge that CAI will be operated in a way that is fair and equitable to all – our employees, our customers, and the broader society. This job description is not all inclusive and you may be asked to do other duties. CAI will also consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Chance Act (FCA) / Fair Chance Ordinance (FCO). We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

US Postal Service - - Responsibilities: Deliver mail along rural route ensuring timely and accurate parcel distribution.

Carrier (City) - Career Job W/Benefits Redmond Wa.

US Postal Service - - Responsibilities: Deliver mail and packages along assigned rural route with safety and reliability.

Carrier (City) - Career Job W/Benefits Bellevue Wa.

US Postal Service - - Responsibilities: Deliver mail along rural routes ensuring timely, safe, and accurate service.

Prepare agendas and make arrangements for meetings, including setting up conference calls and video conferences. Extensive experience with Microsoft internal tools and software, including proficiency in Microsoft Word, Excel (V-lookups, pivot tables), and PowerPoint. This position is embedded within

US Postal Service - - Responsibilities: Deliver mail and packages in Kirkland, maintain routes, ensure timely, safe deliveries.

Paid vacation, sick leave, and holidays Medical, vision, dental, life insurance, AD&D insurance Employer paid pension and options to participate in 401k Employer provided uniforms EAP services including wellness plans Tuition reimbursement for continued education Requisition Summary: Kenworth Truck

Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc. The

No customer service representative experience required. If the idea of getting paid to voice your opinions, test products, and contribute to market innovation appeals to you - and you're looking for flexible, work from home opportunities — this is your chance!. We're currently looking for individu