Office jobs in Huntsville, Alabama - Page 7Create job alerts

Job Description Qualis LLC is seeking an Electrical Engineer with knowledge in hardware-in-the-loop systems, embedded systems, communications, and space based hardware/electronics to join our team of well qualified, diverse individuals at our Huntsville, AL office. Essential Duties: • Assist in the development and tracking of prototype system requirements through system and subsystem design, build, and test., • Prototype System and subsystem level electronic design, documentation, configuration management, test, and evaluation to include component selection, firmware development, integration, and analysis., • Prototype Printed Circuit Board (PCB) design, test, and evaluation of RF, embedded, and analog circuits, • Test plan and procedure development, execution, and reporting, • Procurement and Fabrication management of electrical designs, • Support system integration, test, and evaluation efforts, • Operate and maintain prototype electronic systems, • Collaborate with multi disciplined team members Minimum Requirements: • Bachelor’s of Science (BS) degree in Electrical or Computer Engineering from an ABET-accredited university with a minimum GPA of 3.5, • 3+ years of relevant electrical engineering experience in design, analysis, and test of electrical components and systems, • Candidate must possess a clear understanding of electrical engineering principles such as but not limited to RF Communications, embedded systems, power regulation and distribution, and control theory, • Candidate must have experience designing, documenting, and testing electronic systems., • Candidate must have the ability to work with a multidisciplinary team., • Candidate must be proficient in Microsoft Office Word, PowerPoint, and Excel., • Candidate must have or have the ability to obtain a SECRET clearance., • Must be a US Citizen to obtain and maintain an active Secret clearance, • Candidate must be located in or willing to relocate to Huntsville, AL. Preferred Qualifications: • Master’s degree in Electrical, Computer, or other related technical Engineering from an ABET-accredited university., • Experience with digital signal processing systems and radio frequency (RF) systems preferred. RF bands include C, X, and K band, • Experience with RF communication technology development, integration, test, and evaluation preferred., • Experience supporting projects for the Department of Defense, • Experience with MATLAB/Simulink., • Experience with NI LabVIEW., • Experience with Xilinx FPGAs and SoC., • Experience with Position, Navigation, and Timing (PNT) technology development, test, and evaluation., • Excellent time-management skills, • Excellent oral and written communication skills Qualis LLC is committed to hiring and retaining a diverse and talented workforce who can contribute to the mission and vision of the Company. Our employees are our greatest asset and we promote a positive work environment, teamwork, professional growth, innovation, community involvement, flexible scheduling and a family-friendly work environment. Equal Opportunity Employer/M/F/Vet/Disabled and a Participant in E-Verify

Job Description Job Description Global Trade Compliance Analyst Supply Chain Company & Position Overview: Join us at Lakeland Industries, a leading innovator in the PPE sector. We pride ourselves on delivering exceptional products and services that enhance our customers' experiences. Our commitment to excellence, teamwork, and customer satisfaction makes us an inspiring place to work. We are currently seeking a dedicated Sr. Global Trade Compliance Analyst to drive our compliance and brokerage processes to new heights. At Lakeland, we prioritize compliance and integrity in our international trade operations. We ensure that our practices align with regulatory requirements while delivering the highest-quality service to our customers. We will gather and communicate critical data, including HTS analysis, import matrix, and geopolitical trade developments to inform our strategies to all departments. This comprehensive approach will ensure that we effectively analyze risks and manage international trade. Key Responsibilities: Monitor geopolitical trends and their implications for trade policies Screen transactions against Sanction Party Lists to mitigate risks Oversee daily trade compliance operations across the US, Canada, and EU Foster strong relationships with customs brokers while ensuring regulatory adherence Develop and manage tariff databases Aid in crafting trade forecasts and projections while applying expertise in free trade agreements and rules of origin Data Analysis & Reporting • Analyze trade tariffs and duties for optimization, • Generate monthly duty reports for quarterly and yearly analysis Research & Strategy • Conduct comprehensive market research to enhance trade initiatives and assess policy effectiveness, • Carry out market research to bolster trade initiatives and evaluate the effectiveness of trade strategies Cross-Functional Collaboration • Collaborate with logistics, finance, customer service, and sales to optimize compliance processes Training & Knowledge Sharing • Provide training and ongoing support to team members while keeping abreast of industry trends and best practices Required Skills and Qualifications: Degree in Business, international trade, or economics; equivalent experience is acceptable. Strong leadership, collaboration, and problem-solving capabilities. Skilled in ERP systems, especially SAP. Excellent communication and interpersonal skills. Ability to multitask in a fast-paced environment while promoting a culture of respect and continuous improvement. Independent decision-making capabilities Strong in Microsoft Suite and advanced Excel Minimum Education / Experience: Bachelor’s degree from an accredited college or university 3-5 years of work experience with 2 years of experience in logistics or compliance Preferred Education / Experience: Bachelor's degree from an accredited college or university 2 years of global experience Working Conditions / Equipment: Ability to sit for extended periods at a desk and/or computer Willingness to be on call and adaptable to changing work schedules Occasional access to warehouse and manufacturing areas in both climate-controlled and non-climate-controlled environments Competence with standard office equipment and software Travel may be required domestically and internationally as necessary Powered by JazzHR Rp6gjPDYWG

Job Description IERUS specializes in a variety of electromagnetic spectrum technology research, testing, and implementation. IERUS supports customers with a diverse set of competencies including software, firmware, and hardware development, air and missile defense, and systems engineering. IERUS develops value for our defense and commercial customers through accelerations of the technology life cycle: identifying, creating, transitioning, and producing technologies with integrity of purpose and product. IERUS offers competitive compensation packages, retirement options, and benefits packages. To learn more, please visit . IERUS is seeking highly skilled and motivated engineers to support the design and development of RF hardware systems for sensing, communication, and EA/EW applications. The successful candidate will play a key role in the design and development of advanced hardware systems, contributing to the success of mission-critical applications. Candidates are expected to have experience with board level design of RF systems, including printed circuit board (PCB) design, analysis of RF circuits, and testing, along with their integration with other system components such as power electronics or high-speed communications interfaces. Responsibilities: • Design and develop RF and high-speed electronics for sensing, communication, and other equipment;, • Generate detailed hardware specifications, schematics, and PCB layouts for advanced hardware boards;, • Develop and maintain technical documentation, including system and subsystem specifications, test plans and procedures, and design and analysis reports;, • Determine layer stack up, component selection and placement, and routing of analog, digital, RF, and/or high-power signals;, • Conduct feasibility studies, analysis, and simulation for new hardware designs, ensuring compliance with military standards and requirements;, • Collaborate with cross-functional teams, including software engineers, mechanical engineers, and project managers, to deliver integrated solutions;, • Perform prototype testing, troubleshooting, and validation of circuit boards;, • Maintain component and design libraries;, • Bachelor's or Master’s degree in Electrical Engineering or a related field;, • 10+ years of professional experience;, • Proficiency in relevant tools and software for schematic capture, PCB layout, and simulation (e.g., Altium [preferred], Cadence, Microwave Office, CST Microwave Studio, HFSS, SPICE, etc);, • Fundamental understanding of electrical circuits;, • Strong understanding of RF components and RF circuit design;, • Familiarity with military standards and specifications related to hardware design;, • Ability to balance priorities among multiple tasks and projects;, • Excellent problem-solving and analytical skills;, • Effective communication and collaboration skills;, • U.S. citizen;, • Active Security clearance. Preferred Skills: • 10+ years of professional experience;, • Strong experience with wireless design and basic principles of RF and antenna theory;, • Strong experience with microstrip, stripline, and CPWG design;, • Experience with RF filter networks;, • Experience with system level RF power budgets;, • Experience with testing and validation of RF hardware systems, including thermal and environmental testing;l, • Experience with layouts of RF systems that include FPGA, DRAM, CPU, and other high-density components;, • Experience with designing power electronics and high-voltage systems that support RF electronics;, • Experience with layout of mixed analog and digital signals, including high speed data lines and RF lines, along with impedance-controlled traces';, • Component authenticity verification; Huntsville, AL IERUS Technologies is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other federally protected class. IERUS Technologies participates in E-Verify.

Job Description The Air and Missile Defense (AMD) Product Owner (PO) will work as a member of the Army Program Executive Office Missiles and Space (PEO MS) Integrated Fires Mission Command (IFMC) Project Office (PO). The PO will be responsible for the prioritization and validation of the development software for the Infrastructure Services & Libraries (ISL) team. The position will include reviewing/understanding Systems Engineering concepts/designs/algorithms and providing guidance to the development team. The PO will support the team in the development of acceptance criteria for software updates and be responsible for their verification. The product owner will work with Program Management in setting priorities for the capabilities and defects for the team for each product increment and sprint. The position will include technical briefings, demonstrations and advisement to leadership. The product owner will report on status; recommended courses of action, competing capabilities, performance, risks, and impacts to the IFMC mission. Basic Qualifications: The candidate will need to have a good understanding of at least some of the following: ansible and/or other scripting languages; data logging and archiving best practices; weapon system component health & status reporting best practices; the DDS standard; C++ and Java code. The candidate must be able to work directly with the Agile software developers. The candidate must: • Be fluent in the Microsoft Office toolset, • Be a US citizen, • Have a Bachelor's degree (or advanced degree) from an accredited college (ABET preferred) in engineering, the sciences or mathematics, An additional plus is knowledge in IBCS, PATRIOT, MEADS, THAAD, C2BMC, or AEGIS. The ability to "move out" and champion your ideas, architectures, designs, enthusiasm; independent critical thinking; and a team attitude are very important. Experience in JIRA/Confluence is a plus. Security Requirements: Candidate must be able to obtain a Secret security clearance or higher. Mission Driven Research is an Equal Opportunity Employer, including disability/veterans. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you are interested in applying for employment with Mission Driven Research and need special assistance or an accommodation to use our website, please contact us by email () or by phone by calling (256) 299-9288. When contacting us, please provide your contact information and state the nature of your accessibility issue. Job Posted by ApplicantPro

Job Description Job Summary Assists department, performing any combination of clerical duties requiring general knowledge and application of various work methods and procedures that may be complex. Primary Job Functions • Assisting the PWO department with compilation of project binders such as Work Plans and other project reports/documentation., • Organizing task order on-site filing system as required, using established coding and filing techniques, • Receiving and distributing mail and deliveries, • Assisting Management with updating and auditing spreadsheets and reports, • Basic administrative tasks such as filing, copies, laminating, etc. Required/Preferred Education Level Description Required High School Diploma n/a Required/Preferred Years of Experience Description Required 2 years Experience in office setting. Required/Preferred License/Certification Description Preferred Certification Microsoft Certifications Knowledge, Skills, and Abilities • Demonstrate strong skills in objective problem-solving and decision-making, • Proficient in Microsoft Office Suite of software, • Strong organizational skills, • Strong written and oral communication skills in English., • Strong interpersonal skills Disclaimer This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. Requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. We maintain a drug-free workplace and perform pre-employment substance abuse testing. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $17.75. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN J&J WORLDWIDE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH J&J WORLDWIDE SERVICES.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking an experienced and charismatic Senior Solutions Engineer for a critical customer-facing role. This role supports Sales by providing perspective, feedback, and sharing knowledge learned from the front lines of the aerospace and defense engineering and manufacturing community. This role is a unique blend of customer engagement, technical expertise, and project management. The Senior Solutions Engineering will report into the Pre-Sales Engineering community, which is dually led by Sales and Operations. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a successful, experienced, team-focused engineer with digital fluency and a sincere enthusiasm about the aerospace industry, this could be the right role for you. Responsibilities: • Customer Engagement and Sales: • Partner with Account Executives to drive account growth and retention, • Discover, illuminate, digest, organize and execute major projects, • Join Account Executives in onsite visits with customers when appropriate, • Proactively identify and address potential manufacturing challenges (including DFM), • Stay informed about upcoming customer projects and initiatives to ensure alignment with Xometry's capabilities, • Gather customer insights and feedback to inform sales strategies • Pre-Sales Engineering: • Assist Pre-Sales Engineering with knowledge gathering, digestion, and ultimately compiling correct and competitive quotes, • Combine customer knowledge, Xometry partner knowledge, and Xometry system knowledge to rapidly address customer needs and shepherd projects to delivery, • 10+ years of relevant experience in aerospace and defense engineering and manufacturing roles, • A bachelor's degree in Mechanical Engineering is required, • Experience using Xometry's services from a customer perspective. Partner perspective is a bonus, • Deep familiarity with the methods, materials, culture and products of organizations such as Lockheed Martin, Northrop Grumman, Blue Origin, Anduril, General Dynamics, Moog, SpaceX, • Strong understanding of manufacturing principles, including drawings and GDT, • Particularly strong experience in CNC machining. Composites, Plastics, Harnesses and Sheet Metal Fab are bonuses, • Familiarity with ISO9001, AS9100d, ITAR, NIST and other common and critical compliance and certification requirements, • Excellent communication, interpersonal, and problem-solving skills. This must extend into remote/digital environments, • Ability to travel to customer and/or partner sites as needed. 25%-35% travel is typical, • Mountain or Pacific home time zone preferred, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Looking for an opportunity where you can use your systems engineering expertise to support acquisition programs for a fast-paced product office, then DCS has a great opportunity for you! As a Systems Engineer at our Huntsville, Alabama, customer location, you will perform a wide range of systems engineering services to ensure the customer is compliant with program requirements and objectives, interoperability requirements, configuration management requirements, and similar program wide responsibilities. This is an onsite position. Essential Job Functions: Manages systems engineering activities including requirements analyses, functional analyses, design solutions formulation, systems analysis and control, and generation and maintenance of systems architecture products. Applies system engineering principles and procedures to translate quantified needs/requirements into system performance parameters and the identification of system/item configuration. Formulates and issues systems engineering documents, processes, procedures and milestones. Requires a thorough knowledge of the Systems Engineering Management Process and Implementation. Serves as subject matter expert for all technical aspects of assigned program, providing expert advice on programs and technologies. Translates military operational and mission requirements into practical system concepts and performance specifications. Develops and maintains technical documentation such as specifications, engineering drawings, system interface requirements, and engineering changes. Participates in post awards, program reviews, design reviews, and Integrated Product Teams as the project engineer and/or technical expert on assigned programs. Evaluates design efforts to ensure integration of all the engineering disciplines and adequacy of the analyses performed. Reviews test plans, procedures, and reports for technical adequacy on assigned programs, for both Government and contractor tests, as well as all failure reports. Reviews and evaluates system performance against specification requirements, monitors and assesses field performance, and assesses risk of meeting user and specification requirements. Initiates engineering change proposals and waivers/deviations as required and conduct physical and functional configuration audits. Reviews program management documents to ensure accuracy and adequacy of technical content. Some travel may be required to support program tasks. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. Bachelor's in Systems Engineering or Systems Management and 15 years or Master's degree with 12 years of experience or PhD in Engineering with 10 years of experience performing systems engineering and integration, preferably spanning the full product life cycle. Must be able to obtain a Secret clearance. Knowledge of DOD policies on Systems Engineering, Integrated Product and Process Development (IPPD) and IPT Management. Ability to coordinate and negotiate design and engineering activities with other related programs and organizations. Equivalent or experience commensurate with DAWIA Level III SPRDE certification.

Job Description Position: Property Management Specialist Level: 10 FLSA Classification: Non-Exempt Location: Onsite Vehicle Requirement: Personal vehicle may be required for job duties. Physical Requirements: Ability to stand, walk, bend, kneel, stoop, crouch, and lift/move items over 50 pounds. Job Duties and Responsibilities may include, but are not limited to: • Manage and verify government hand receipt accounts using Auto Scan Tracking System (ASTS) and the Army's Global Combat Support System (GCSS-A)., • Handle property transportation, ensuring safe loading, unloading, and setup with proper equipment checks., • Assess locations, document property details, and manage transactions like additions, corrections, turn ins, barcode re-orders, and property transfers., • Issue and update Sub Hand Receipts., • Work with the Property Book Office to ensure accurate, secure, and timely transactions, resolving any discrepancies., • Conduct full inventories, analyze property management issues, and develop solutions., • Operate government vehicles and equipment, such as forklifts and box trucks., • Maintain compliance with Army regulations and ensure property accountability., • Requires High School diploma/GED plus 2 years of general experience, • Master's degree will substitute for 6 years of experience, • BS/BA degree will substitute for 4 years of experience, • Associates degree will substitute for 2 years of experience, • Experience with the following a plus:, • ASTS® and GCSS-A, • MS Excel, MS Word, MS PowerPoint, • Must be able to work both independently and in a team-oriented, collaborative environment, • Strong written and oral communication skills, • Strong interpersonal skills, • Ability to effectively prioritize and execute tasks in a high-pressure environment, • Must be able to obtain a U.S. Government Security Clearance Job Posted by ApplicantPro

Job Description Leaf Home is North America’s leading technology-enabled provider of home solutions. Our award-winning products offerings include LeafFilter Gutter Protection, Leaf Home Safety Solutions, Leaf Home Water Solutions, and Leaf Home Enhancements which all provide ample opportunity to be part of a winning team. In addition to serving our customers, Leaf Home strives to build a welcoming and inclusive workplace. We are proud to be a certified Great Place to Work® as well as a multi-recipient of Top Workplaces. We are seeking outgoing, energetic individuals to join the best event marketing team in North America as a part-time Event Marketer at trade shows, fairs, festivals, and events throughout the area. Job Summary: The Event Marketer will attend pre-scheduled events and generate leads for the local office through ongoing interactions with potential customers. Assigned to work trade shows/events/fairs/festivals, and community events to generate qualified leads for our talented sales team. Responsible for exceeding issued lead targets and goals administered by the Event Marketing Manager. • Interact with potential customers and provide product demonstrations using high energy and positive engagement techniques, • Work well without close supervision but always keeping the manager informed, • Generate and Data Capture show leads for our award-winning products, • Ability to work weekends (Friday, Saturday, Sunday), • Reliable vehicle and valid driver’s license required, • Attention to detail and punctual, • Self-motivated with a strong desire to educate potential customers about our product line, • High level of energy, engagement and standing for extended periods of time at events, • Ability to utilize our proven system to generate qualified leads for our rapidly growing company, • Must have a smartphone to use the Company timekeeping application and submit leads. What we offer: • Starting pay: $18 per hour + Commission. Paid Weekly - Every Friday!, • Compensation increases based on event performance, • Paid Training and flexible scheduling To our customers, Live Comfortable, Live Safe and Live Happy. To our employees we want you to Work Comfortable, Work Safe, and Work Happy. APPLY TODAY!

Job Description The Company EngeniusMicro is a hardware focused small business with offices in Huntsville, AL; in Atlanta, GA; and near Lynden, WA. Our multi-disciplinary staff of engineers and scientists provide research and development engineering services to industry and the Federal Government. Our primary research areas are Additive Manufacturing for RF electronics, MicroElectroMechanical Systems (MEMS) / Nanotechnology, and Microelectronics. As a research-focused small business, we offer opportunities for growth and advancement for a motivated candidate. The Culture EngeniusMicro seeks self-motivated, highly organized, and responsive employees able to work in a fast-paced, small team environment. The ideal employee will thrive in a learning environment that encourages independence, initiative, leadership, and professional growth. Why should you apply? • You like solving technical challenges in a fast-paced collaborative environment, • You're interested in building a key component in hardware and prototypes, • You want to work somewhere your interests can influence the direction of the company, • You enjoy making products that are both technically and visually intriguing., • You like taking on multiple roles and responsibilities for a wider range of skills and experiences, • You're interested in feeling a greater sense of autonomy and ownership in what you do, • You want to develop adaptability and problem-solving skills as you tackle diverse challenges The Position Duties & Responsibilities • Assembly of mechanical fixtures and hardware in support of research and development efforts using various power tools (i.e. drills, dremels, saws, mills), • Fabrication or modification of prototype hardware using multiple processes such as machining, metal fabrication, woodworking, and 3d printing., • Using adhesives, epoxies, painting, and other chemicals typically used in a workshop., • Perform quality inspections of both incoming and outgoing mechanical and electrical assemblies using inspection equipment such as calipers and multimeters., • Aid engineers in developing procedures for a variety of hi-tech projects., • conducts tests and troubleshoots equipment, • Documents test procedures and results. Qualifications Basic • Natural curiosity towards engineering technology and a drive to gain hands-on experience with hardware as well as all aspects of a project's lifecycle, • Basic mechanical aptitude (i.e., work on your own car, Involvement in NASA Student Launch or Centennial Challenges, Formula SAE)., • Strong attention to detail and workmanship., • Follow established guidelines for safe material handling and protective gear, • Ability to work independently on a variety of different production tasks, and balance task priorities to meet deadlines., • Experience in machining, metal fabrication, plastics molding, plastics fabrication, and rapid prototyping., • Ability to look up, understand, and work from vendor hardware specifications, data sheets, or drawings., • Ability to use Microsoft Office products., • Ability to 3D CAD model, • Experience with 3D printers, • Basic soldering skills, • The ability to obtain/maintain a final Secret DoD clearance, for which the US Government requires US Citizenship The Legal Stuff EngeniusMicro provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants have rights under Federal Employment Laws. • Employee Polygraph Protection Act (EPPA), • Equal Employment Opportunity (EEO), • E-Verify Participation, • Family and Medical Leave Act (FMLA), • Immigrant and Employee Rights, • Uniformed Services Employment and Reemployment Rights Act (USERRA) Job Posted by ApplicantPro

Job DescriptionPosition Description: Property & Location: HuntsvilleJob Title: Maintenance Technician About us:Summerfield Property Management (SPM) is a growing property management firm dedicated to providing exceptional living experiences for our residents. We manage a diverse portfolio of residential properties, ensuring they are well-maintained and safe for all residents. As we expand our reach, we are seeking talented individuals to join our team and help us maintain the highest standards of quality and service. Key Responsibilities: As a Maintenance Technician at SPM, you will be responsible for: Conduct all business in accordance with Summerfields policies and procedures, Fair Housing, Americans with Disabilities Act, Fair Credit Reporting Act, OSHA, and all other Federal and States laws. Satisfies service requests per work order; enters at residents convenience, if possible. Cleans up thoroughly. Makes regular inspections of the grounds, buildings, plumbing, electrical fixtures, appliances, and major equipment; reports all needed repairs to the Community Director. Is available for emergency purposes; familiar with power, water and gas turnoffs, clean-out traps, fire extinguishers and fire hydrants; knows emergency contact numbers. Assists in maintaining inventory of tools, equipment, and supplies. All other duties as assigned. QualificationsTo be successful in this role, you should have:High school education or equivalent. Full-time maintenance experience / Familiarity with electricity, plumbing and carpentry / Working knowledge of HVAC systems and various appliances. Work Hours: 40 hours per week with flexible workweek, including weekends. Competence in personal computer skills, keyboard, internet search, math, Microsoft Office Suite including Word, Excel, and Outlook as well as Summerfield software applications. Pre-employment drug test and background check required. May need to utilize personal transportation. Must have valid drivers license and automobile insurance. Benefits: We offer a competitive salary and the following benefits package: Health Insurance Vision Insurance Dental Insurance 15 Paid Days Off First YearHealth Savings Account Basic Life/Volunteer Life Long Term/Short Term Disability Promotion Opportunities Join our team and be a key player in maintaining the high standards of living in our properties and providing excellent service to each one of our residents! SPM is an equal opportunity employer. We encourage candidates from all backgrounds to apply today! $21.00 - $24.00 Hourly

Job Description HVAC Project Sales Representative Location: Huntsville, AL Comp: $60K to $95K base Salary + Bonus and Commissions OTE(On Target Earnings): $140K to $150K Position Summary We are seeking a results-driven Commercial HVAC Project Sales Representative to join our expanding team in Huntsville, Alabama. The ideal candidate will be responsible for generating and managing sales of HVAC and process systems, from identifying opportunities to project execution. We are looking for a professional who thrives in a consultative sales environment and is passionate about delivering tailored solutions. Key Responsibilities • Consult with new and existing clients to identify HVAC needs and present appropriate solutions., • Generate and qualify new sales leads., • Prepare and deliver compelling sales presentations and proposals., • Address customer questions and objections with professionalism and technical insight., • Manage quotes efficiently and drive sales to meet or exceed annual targets., • Build and maintain strong customer relationships to foster repeat business. Why Join Us? • Guaranteed Stability: This is a long-term career opportunity that offers guaranteed 40-hour weeks and consistent, year-round work., • Unmatched 401k Match: We offer a 7% 401k company match, a benefit that is rare in the industry., • Comprehensive Benefits: You will receive full health, vision, and dental benefits, along with company-paid short-term and long-term disability and life insurance., • Company-Provided Resources: A take-home company van is provided for your use., • Clear Path for Growth: We are a growing company that values internal development and provides six-month and annual evaluations for pay raises and bonuses. You will have significant opportunities for career growth., • Supportive Culture: Be part of a respected team with a strong reputation for excellence and a culture that values integrity and professionalism. Minimum Qualifications • A minimum of 7 years of HVAC project sales, retrofit, or related technical sales experience., • Proven success in managing HVAC projects from proposal through execution., • Strong organizational skills and attention to detail., • Excellent oral and written communication abilities., • Demonstrated ability to manage time effectively in a fast-paced environment., • Proficient in Microsoft Office Suite (Word, Excel, Outlook, etc.)., • Exceptional customer service and relationship-building skills., • A collaborative team player with a strong work ethic. #LI-SH2 #LI-OnSite

Job Description DCS Corporation is seeking a Logistics Specialist to provide logistics support for a fast-paced Army product management office in Huntsville, Alabama. The ideal candidate is a self-starter with Army aviation maintenance and supply chain logistics expertise. Essential Job Functions: Provides, coordinates, and conducts logistics, maintenance, and sustainment planning. Assists with logistics performance specifications and statements of work and ensures continued operation and maintenance of a system. Reviews and assesses logistics deficiencies throughout the life cycle. Identifies opportunities for performance and capability enhancement, evaluates deficiencies for correction, and develops corrective action options. Recommends design changes to resolve operational and safety issues and provides analysis of environmental and safety hazards, failure causes, and effects, reliability and maintainability trends, and operation use profile changes. Provides logistics support for system testing, Technical Manual (TM) validation/verification, Logistics Demonstration, and fielding and training. Ensures cost-effective support to achieve peacetime and wartime readiness and performance over the system’s life cycle. Establishes and coordinates provisioning requirements and execution with Life Cycle Management Centers (LCMC) and contractors. Interfaces with internal and external stakeholders on logistics requirements. Establishes and assists in the planning, developing, coordinating, defending, and executing all aspects of the PEO/PM’s life cycle logistics support under the DOD acquisition and sustainment processes. Identifies product life cycle logistics requirements. Reviews product sustainment plans and related acquisition logistics documents. Assists in logistics automation using enterprise planning tools (GCSS-Army, DPAS, LMP, and etc.) for acquisition and sustainment operations. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. Bachelor's degree and 5 years of relevant experience, Associate's degree and 7 years of relevant experience, or High School Diploma and 13 years of relevant experience. Must have a Secret clearance. Knowledge of logistics enterprise planning tools (GCSS-Army, DPAS, LMP, and etc.) and Army supply chain. Demonstrated experience in Level of Repair Analysis (LORA) and Failure Mode, Effects, and Criticality Analysis (FMECA). Thorough understanding of life cycle logistics regulations and policies, including DoD 5000 series, AR 70-1, AR 700-127, and AR 700-142. Competency in communication, leadership, logistics automated systems, team management, and risk management. Ability to lift and move 40 pounds and stand during the workday in a warehouse environment. (A good portion of this position involves hands-on materiel handling/warehouse work.) Ability to install aviation related communication equipment and work in the field in support of mission requirements. Ability to work independently and safely. Valid Driver's License. Travel up to 40%. Desired Skills: Experience in Army aviation maintenance is a plus. Equivalent of DAWIA Certification Level II for Life Cycle Logistics. Knowledge of Logistics, Maintenance, Sustainment Engineering, and National Environment Protection Agency (NEPA) policies.

Job Description DCS is seeking a Junior Acquisition Logistics Analyst to support a Army aviation program office in Huntsville, Alabama. This is a full-time onsite, entry-level opportunity. Essential Job Functions: Assists in integrating the 12 Integrated Product Support Elements (IPSE) into all aviation crew products of the program office. Supports the execution of all aspects of the program manager’s Life Cycle Logistics under the processes of DoD acquisition and sustainment. Assists in investigating and resolving problems, interfacing with stakeholders, and establishing inventory management using enterprise planning tools (GCSS-Army, DPAS, LMP, etc.) for acquisition and sustainment operations. Required Skills: Due to the sensitivity of customer related requirements, U.S. Citizenship is required. Ability to obtain and maintain a Secret security clearance. Bachelor's degree and 2 years experience. Strong oral and written communication skills. Desired Skills: Knowledge of lifecycle logistics regulations and policies including DoD 5000 series, AR 70-1, AR 700-127, and AR 700-142.

Job DescriptionADMN09242025-3 JOB TITLE: Weeknights Vault Checker WORK LOCATION: Redstone Arsenal, AL 35898 FULL-TIME (hours per week: 40) M-F 11:00PM-7:00AM EDUCATIONAL QUALIFICATIONS: High School or GED required. EXPERIENCE QUALIFICATIONS: • 1-2 years’ experience as a Vault Checker, • Proficiency utilizing the Microsoft Office suite and general computer operation is required, • Working knowledge of using 702 forms., • Additional Preferred Qualifications: Experience with security regulations required for working in secure buildings, • OTHER QUALIFICATIONS:, • Resume submitted with job application is required, • Current/active Secret-level security clearance mandatory, • Must be authorized for coverage under agency insurance if operating agency vehicle, government/customer vehicle and/or personal vehicle for work purposes; have good driving record, valid driver’s license, and/or required level of personal auto insurance, • Must be able to satisfactorily complete a background check, per company requirements., • Ability to communicate with tact and maintain confidentiality, • Adequate ability in communicating in spoken conversation – adequate volume speech., • Adequate ability in writing/reading/mathematics, • Ability to effectively build and maintain positive working relationships with management and peers, • Experience with proven analytical and multi-tasking skills, • Project Manager POSITIONS SUPERVISED (or Team Lead responsibilities, if applicable): ESSENTIAL FUNCTIONS: • Ability to walk 1.5 miles 4 times during a 12 hour work day., • Ability to drive from designated building to other locations during day light hours and night time hours without any problems., • Must have a driver’s license and have the authorized coverage under agency insurance to maintain a good driving record and be able to drive on the job., • Maintain the door checks at a schedule of every 3 hour rotation and making sure all doorway locations are secure and noted on the log sheet at each location an SF 702., • Reads and responds to e-mails from supervisors and customers, • Being proficient in English (oral and written communications), • Interact with co-workers, other professionals, and interested parties in a professional manner., • Prepare correspondence as directed to include typing, editing, logging, and filing., • Respond to routine telephone calls/requests; refer calls, visitors and incoming correspondence to the appropriate person, • Utilize Microsoft Office software programs and specific government required software, • Comply with organizational Operations Security and Information Security requirements, • Arrive on time and ready to work assigned schedule, • Provide high level of customer service to all patrons, coworkers, and other interested parties, • Take direction, interact and maintain open communication with supervisor / lead, • Adequate hearing required for conversation, telephone use, and emergency information systems., • Ability to independently mobile on all surfaces and situations, • Ability to move safely about work area., • Ability to retrieve items from high and low areas, • Ability to perceive size, discrimination, temperature, shapes, and/or textures, • Must be able to change routine in a positive manner., • Must be able to follow through on assignments independently., • Must have good organizational skills., • Must have a long attention span in order to listen to people, perceive the real problems and bring issues to a successful conclusion., • Must be able to analyze many variables and choose the most effective course of action for the organization at any given point in time., • Must possess effective oral and written communication and interpersonal skills., • Must be able to maintain confidentiality., • Must have stable work behaviors on a daily basis., • Must have adequate individual coping skills., • Must be able to maintain good work attendance., • Must be able to resolve problems, handle conflict and make effective decision even in emergency situation., • Must be able to exercise good judgment in an effort to maintain a safe work environment. NON-ESSENTIAL FUNCTIONS: Powered by JazzHR hzP43vc8b2

Description Leidos is dedicated to making the world a safer place. This starts with helping our customers in the Defense Industry achieve their critical missions. Our dedicated Defense Group employees are solving critical challenges across the globe. At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos provides responsive, cost-effective engineering, scientific and IT solutions. Leidos is well known for our people-oriented culture, positive work environment, technical excellence, and resilient business ethics. Within the Defense Sector, the Airborne Systems Business Area at Leidos currently has an opening for a talented Aviation Embedded Software Engineer to work in our Huntsville office. This is an exciting opportunity to use your experience to help develop software for tactical strike, sensors, CUAS, and UAS solutions. This position focuses on the development of robust, innovative software frameworks, as well as the fielding, support, and maintenance of software products. Software products range from analysis tools/simulations, mission planning software, and components of mission-critical systems. Primary Responsibilities. • This position involves conceptual design across the full stack of software for airborne systems, embedded software architectural design, code implementation, team peer review, unit testing, cohesive integration of loosely coupled software modules within subsystems and across distributed networks, use of DevOps and CI/CD pipelines, and development of software tools, harnesses, and infrastructures to support a fully integrated solution., • Direct communication with customers, end users, internal stakeholders, and team members will be required on a frequent basis. Basic Qualifications. • Candidate must possess at least a bachelor’s degree in Software Engineering, Computer Science, Computer Engineering, Electrical Engineering, Aeronautical Engineering, Mathematics, or equivalent technical degree with an overall GPA of 3.0 or higher., • Candidate should have 4-8 years of relevant technical experience., • Have a proven track record of implementing software according to high quality development principles., • Candidate must demonstrate a strong competency in software development in either C, C++, Java, or Python programming languages., • Working knowledge of inter-process communication, multithreaded programming, and memory management., • Have experience writing unit and integration tests with unit test frameworks., • Possess an aptitude for the technical skills required for software development, configuration management, and software quality engineering concepts., • Have strong analytical and process improvement skills along with a personal drive for details and quality workmanship., • Possess an aptitude for the technical skills required for software test and software quality engineering concepts., • Candidate is expected to accept constructive feedback from more senior software team members., • Demonstrate familiarity with Microsoft Office (Outlook, Word, Excel, and PowerPoint)., • Have excellent teamwork and communication skills. Security Clearance Qualifications. • Must be a U.S. Citizen with the ability to obtain and maintain a Secret Security Clearance. Preferred Qualifications. • Experience working under a disciplined software engineering process., • The ability to work across multiple products under development by multiple small teams., • Familiarity with embedded software such as device drivers, board support packages, boot loaders, Real Time Operating Systems (RTOS), and Hardware Description Language (HDL)., • Familiarity with hardware such as microcontrollers, single board computers, common peripheral interfaces, and hardware test equipment., • Current security clearance (Secret). If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:September 23, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $85,150.00 - $153,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Job Description Key Responsibilities: * Clinical Support: • Assist healthcare providers during patient exams and procedures by preparing equipment, ensuring sterile environments, and providing instruments or supplies as needed., • Take and record vital signs (e.g., blood pressure, pulse, temperature, respiration rate) and document findings accurately., • Prepare patients for examinations by collecting medical histories and explaining procedures., • Prepare and assist with diagnostic tests or procedures, including EKGs and other routine tests., • Provide basic patient care, such as wound care and assisting with mobility if needed. Administrative Support: • Manage patient flow, schedule appointments, and handle patient check-ins/check-outs., • Maintain accurate and up-to-date patient medical records, including documenting procedures, test results, and patient interactions in electronic health records (EHR) systems., • Process patient billing information, including insurance verification and co-payment collection., • Answer phones, respond to inquiries, and assist in managing patient referrals and authorizations., • Ensure all required forms, consents, and documents are completed and filed appropriately. Patient Education: • Educate patients about procedures, medications, and home care instructions under the direction of the healthcare provider., • Provide instructions on pre-procedure preparation or post-procedure care. Infection Control & Safety: • Maintain a clean and sterile environment in clinical areas., • Follow proper infection control procedures, including sanitizing equipment, using protective equipment, and disposing of medical waste., • Adhere to safety protocols and assist in maintaining a safe and organized clinical space. Team Collaboration: • Work closely with physicians, nurses, and other healthcare professionals to provide comprehensive patient care., • Participate in team meetings and continuing education to stay updated on the latest medical procedures and standards., • Assist in training new medical assistants or administrative staff as needed. Compliance & Regulations: • Ensure that all tasks are carried out in compliance with HIPAA and other regulatory standards., • Follow office and clinic policies and procedures, ensuring high standards of medical care and patient confidentiality.

Job DescriptionDescription: Job Title: Medical Assistant Department/Group: Clinical Position Type: Hourly non-exempt JOB DESCRIPTION Dermatology Solutions Group, LLC (“DSG”) provides professional management services to Southeastern Dermatology Group, P.A. (“SEDG”), a medical practice headquartered in Panama City, Florida with locations throughout the Southeast. SEDG has a professional team of physicians who are trained in the medical and surgical sub-specialty of dermatology. PURPOSE: The Medical Assistant is responsible for assisting Medical Providers with day to day delivery of health care and patient care management. This position will report directly to the Office Administrator and will receive indirect supervision from the following: Physicians, Advanced Nurse Practitioners, Physician Assistants and DSG Management. SERVICE ORIENTATION: This position is patient focused with the objective of delivering superior patient care and ensuring positive patient experiences and outcomes. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Ensures an excellent patient experience with all aspects of the practice and associated interactions, including phone, in person, and online., • Ensures correct and complete patient information in health record by accurate documentation of notes throughout visit. Electronic notes are to be completed the same day as patient visit., • Proactively performs essential and assigned daily clinic duties, which may include, but are not limited to:, • Prepares patients for examination and treatment by escorting them from the waiting area to the exam room, documenting patient’s history (HPI), determining chief complaint, verifying medical and surgical histories, current medications, and take vital signs if applicable., • Prior to surgery, reviews and completes required surgical documents with recent test results and correspondence in order to help determine needed services per practice protocol., • Prior to patient visit, confers with Medical Provider regarding any incomplete patient tests/consults or other incomplete orders., • Responds to patient communications and questions in a timely manner., • Prepares, cleans, stocks and maintains exam and treatment rooms daily., • Cleans and sterilizes all necessary instruments; ensures appropriate instrumentation and equipment available and ready for use prior to clinic., • Prepares and maintains clinical supplies and equipment necessary for daily clinic needs and patient care., • Prior to treatment, ensures that all proper consents have been reviewed, initialed, signed and dated by the patient., • Administers injections and assists with examinations and office procedures as needed; provides other patient care services as directed by the Medical Providers., • Performs suture removals as directed by the Medical Providers., • Ensures that all assigned telephone encounters have been addressed daily., • Upon Medical Providers’ orders and direction, ensures that the delivery/transmittal of patient e-prescriptions are completed same day; responds to medication requests and questions same day when able or within 24 hours., • Verifies all patient/specimen information corresponding with tissue specimen(s); Records tissue specimen(s) and enters them into log., • Triages and responds to patient communications in a timely manner, usually same day or within 24 hours., • Assists with scheduling tests and treatments, and processing referrals to other providers., • Creates, maintains, copies/scans and files patient encounters, records and other documents as required and necessary in the electronic patient record., • Performs medication prior authorizations as necessary., • Responsible for abiding by the Standards of Conduct and meets all compliance and other training requirements., • Participates in professional development activities and maintains professional affiliations., • Maintains strict confidentiality., • Treats co-workers, medical providers, patients, and visitors with dignity and respect at all times., • Performs other related duties as required and assigned., • Knowledge of medical practice operations and patient care standards., • Knowledge of examination, diagnostic and treatment room procedures., • Knowledge of medical equipment and instruments., • Knowledge of common safety hazards and precautions., • Ability to assist in a variety of common office procedures., • Ability to take vital signs, if applicable., • Ability to develop and maintain clinical quality assurance., • Ability to identify and proactively solve issues., • Ability to maintain accurate records and record test results., • Ability to interpret, adapt and apply guidelines and procedures., • Ability to use good reasoning and judgment and react calmly in emergency situations., • Ability to establish and maintain effective working relationships with patients, medical staff, co-workers and the public., • Ability to read, write and communicate effectively orally and in writing., • Knowledge of basic arithmetic and medical terminology., • Ability to work with electric medical record technology as a primary means documentation., • High school graduate or GED and current certification., • One year medical experience in a physician’s office or equivalent combination of training and experience preferred; will train a highly-motivated new graduate., • Stand for extended periods of time; push, pull and reach; occasionally bend, sit, stoop and stretch., • Have full range of body motion, including handling and lifting of patients., • Have the hand-eye coordination and manual dexterity needed to operate a keyboard, photocopier, telephone, calculator and medical equipment., • Have a normal range of hearing and eyesight to record, prepare and communicate appropriate reports; specific vision requirements: close vision, distance vision, color vision, peripheral vision, depth perception and the ability to focus., • Occasionally lift and carry up to 20 pounds., • Relocate to other jobs or office locations. The work of this position is performed in an environmentally controlled office environment. The position requires the ability to work under pressure on multiple tasks with a diverse population, including staff, physicians, clients, patients, insurance companies and other members of the public on a regular basis.

Job DescriptionCenter Administrator American Family Care Empower Teams. Elevate Care. Lead with Purpose. American Family Care (AFC), one of the nations leading providers of urgent care and accessible healthcare, is seeking a driven Center Administrator to oversee daily operations at one of our dynamic clinics. If youre a people-first leader with healthcare experience and a passion for operational excellence, we want to hear from you. Why Youll Love This Role: At AFC, youll be at the heart of care delivery - managing clinic operations, developing high-performing teams, and driving service quality. Youll work side by side with physicians, APPs, and support staff to ensure seamless care for every patient, every time. What Youll Do: Lead all non-provider staff, including Medical Assistants, Receptionists, and X-Ray Techs Recruit, onboard, and develop clinic team members Ensure daily operations run smoothly - supporting clinical care, scheduling, and supplies Uphold top-tier compliance, safety, and service standards Analyze and drive performance through KPIs and budget oversight Step in to assist on the floor as needed to maintain continuity of care What You Bring: 3+ years of healthcare management experience (urgent care/immediate care preferred) Clinical background or MA certification a plus Proven leadership in team building, scheduling, and performance management Strong communication, problem-solving, and organizational skills Proficiency in Microsoft Office and EMR systems (Experity experience a bonus) Deep knowledge of HIPAA, OSHA, and healthcare compliance regulations The Perks: Leadership opportunity with one of the fastest-growing urgent care providers Collaborative, mission-driven work culture Opportunities for growth and advancement Competitive compensation and benefits Ready to Lead With Impact? Apply now and bring your energy, vision, and healthcare know-how to American Family Carewhere every role matters and every leader makes a difference.

Job Description deciBel Research has an immediate opening for a Radar Operator in Huntsville, AL. Position Description: deciBel Research is seeking radar operations personnel for a Missile Defense System (MDS) radar developed for the Missile Defense Agency (MDA). Individual operators will perform hands-on radar operations during MDS ground test events as well as system maintenance activities. The operator will be required to coordinate daily with the Program Manager and Test Event Lead for tasking and problem resolution. Additional responsibilities include daily interaction with analysts, engineers, other members of the technical team and MDA customers. Deployment to the operational site in support of the MDS distributed ground tests and flight tests may be required. Individuals with previous experience developing operational procedures and conducting MDS ground tests utilizing Hardware in the Loop (HWIL) radar representations and/or direct experience with fielded radar systems will find this work challenging and rewarding. These positions provide an excellent opportunity for employee growth and advancement. Education Requirements: Vocational school certification or Associate's Degree from an accredited college or university in a computer science or network engineering related field. Experience Requirements: • 5+ years of technical experience operating one of the MDS radars., • MS Office, MS Windows Job Posted by ApplicantPro

Job Description Office Manager – Commercial Contractor (Construction Experience Required) A Bit about Us: We are a well-established interior commercial contractor specializing in metal framing, drywall, and acoustical ceilings. Known throughout the Southeast for delivering high-quality work, we partner with clients who demand precision, professionalism, and accountability. Our projects range from high-end office buildouts to healthcare and data center installations, and we pride ourselves on delivering consistent, excellent results. Why join us? Stable, Full-Time Position Competitive Salary: $55,000 – $70,000 based on experience Work with a Professional Construction Team Opportunity to Grow in a Fast-Paced, Supportive Environment Be a Key Player in a Respected, High-Performing Company Autonomy & Leadership Growth • Enjoy the flexibility to work independently or collaborate closely with our experienced preconstruction team., • Take ownership of estimates from start to finish while having the support of leadership when needed., • No micromanagement—we trust our estimators to manage their workload efficiently. Build & Shape Your Own Market, • As our company continues to grow, we offer the unique opportunity to carve out a specialized market sector (such as healthcare, higher education, or mission-critical)., • Future leadership paths include the potential to run your own division and make a lasting impact on the business. Collaborative & Entrepreneurial Culture, • We foster a team-oriented environment where ideas are valued, and input is encouraged., • Work alongside experienced leadership who are invested in mentorship and career development., • Join a company that promotes from within, offering a true merit-based path to senior leadership.Key Responsibilities Oversee day-to-day office operations, including scheduling, document management, and communication flow * Maintain organized records of contracts, submittals, change orders, and job files * Work closely with Project Managers and field staff to track project schedules, budgets, and resource needs * Manage and process payroll, accounts payable/receivable, and vendor invoices (in coordination with accounting) * Handle HR-related tasks such as onboarding new employees, maintaining employee records, and benefits coordination * Ensure compliance with licensing, insurance, safety documentation, and other administrative regulations * Coordinate with general contractors, suppliers, and subcontractors to keep projects running efficiently * Support estimating and project tracking using software tools (experience with Procore, QuickBooks, or OST a plus) What We're Looking For * 3+ years of office management or project admin experience within a construction or subcontracting environment * Strong knowledge of construction documents, terminology, and workflow * Exceptional organizational skills and attention to detail * Ability to multi-task and prioritize in a fast-paced environment * Strong computer skills: Microsoft Office, spreadsheets, project management software * Excellent communication and interpersonal abilities * Self-starter who can take initiative and work independently Preferred but Not Required * Familiarity with Procore, QuickBooks, or other industry-specific software * Bilingual (English/Spanish) is a plus If you're a construction-savvy professional with a knack for organization and leadership, we'd love to hear from you. Apply now and become a critical part of a company that values quality, accountability, and operational excellence.

Job Description Hotel : Huntsville Embassy Suites800 Monroe StreetHuntsville, AL 35801Full timeCompensation Range : $20.00-$23.60 Hourly Compensation is determined based on a variety of factors, including experience, skills, qualifications, and the specific location of the role. Actual pay may differ depending on these factors. What's in it for you? The Atrium SPIRIT is a belief in the power of Service, Perseverance, Inclusion, Respect, Innovation, and Teamwork to create an environment where everyone thrives. We go above and beyond to deliver exceptional guest experiences, work together to overcome challenges, and are passionate about positively impacting those around us. • Career Growth & Learning - 40% of our management hires are internal promotions!, • Invest in Your Future - 401(k) plan with company match., • Comprehensive Health Coverage - Medical, dental, and vision insurance options., • Paid Time Off & Vacation - Enjoy exclusive Atrium Traveler and brand discount programs to explore new destinations, • Perks That Fit Your Life - Enjoy DailyPay, wellness programs, tuition reimbursement, and exclusive discounts on your favorite brands and services. What You Will Do • Lead the front desk team to deliver a warm, seamless guest experience that builds loyalty and satisfaction., • Respond to guest needs with professionalism and empathy, ensuring timely resolution and follow-through., • Support financial goals by managing inventory, controlling costs, and optimizing schedules., • Oversee daily front desk operations, ensuring tasks are completed across all shifts., • Step in for the Front Office Manager when needed and assist with Night Audit, Shuttle, or Concierge roles., • Customer service experience is essential because creating memorable guest moments is what we do best., • Hospitality background is a plus-it helps you understand the rhythm and flow of hotel life., • High school diploma or equivalent provides the foundation for your leadership journey., • A valid driver's license is needed since you may occasionally assist with guest transportation., • Comfort with technology is important to manage guest information and team coordination., • Accountable Achievers: take ownership and deliver results with pride and consistency., • Agile Thinkers: adapt quickly and solve problems with creativity and calm., • Talent Curators: grow people, not just teams, through coaching and support., • Transparent Leaders: communicate clearly and lead with integrity and trust. Here it from Maria: For anyone considering a career with Atrium, I highly recommend it. The company is big on internal promotions, and there are always opportunities to grow, whether it happens right away or down the road. Atrium is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Notice of candidate Privacy Rights:

Job Description Ready to launch your career? RGNext operates, maintains, and sustains mission-critical systems to provide safe and effective launch, testing, and tracking of Department of Defense, civil, commercial and international space lift vehicles. We support ballistic missile, guided weapon and aeronautical tests and evaluations as well as support space situational awareness operations and experiments to defend the United States to ensure our nation’s safety. Our employees serve on the forefront of global defense and space operations. We offer our team of experienced, professional employees an environment of challenging, stimulating and personally and professionally rewarding career opportunities. This position is located on Kwajalein Atoll in the Marshall Islands. Essential Functions • Provide technical support for all operations of the ALCOR & MMW receivers., • Provide input for design modifications and improvements for both ALCOR & MMW receivers; this includes creating schematics and implementing modifications as well as directing activities of technicians and helpers to properly install these design modifications., • Support maintenance efforts on both ALCOR & MMW receivers; directs technicians and helpers to accomplish these maintenance activities., • Perform testing and failure analysis of the ALCOR & MMW receivers down to the component level; designs and implements corrective measures to prevent future failures., • Determine ALCOR and MMW receivers spare requirements and orders parts as required; finds replacement candidates for obsolete parts and implements required design changes., • Provide technical support to Systems Engineering and management for all ALCOR & MMW receiver technical issues., • Modify and maintain documentation for ALCOR & MMW receivers including but not limited to equipment schematics and manuals; verifies drafting changes to drawings and manuals meet engineering requirements., • Write weekly reports conveying receiver developments and issues and/or problems to management., • Provide email correspondence with various vendors and other suppliers as required., • Provide input regarding performance of junior engineers, technicians, and field engineers., • Perform other related duties as assigned Required Skills, • Solid knowledge of the fundamentals of receiver architecture., • High degree of demonstrated ability to effectively use high frequency, RF and millimeter wave electronic equipment with RF calibration to perform complex measurements in both time and frequency domains., • Thorough understanding of the radar range equation and frequency correlation, understanding of receiver gain, noise figure, intercept point, spurious frequency response and their measurement methods., • Design and assembly familiarity with RF to millimeter transmission lines and connectors, coaxial and waveguide., • Familiarity with coaxial and waveguide RF switching, radar protective and T/R switches, analog and digital control hardware, RFI shielding practices, • Familiarity with software such as Matlab, Microwave Office, Agilent ADS, Spice, OrCAD. Basic familiarity with LINUX commands is desirable., • Ability to work independently with limited guidance., • Ability to assist in development of junior engineers and technicians., • Ability to lead various disciplines in the completion of projects that may sometimes be technically complex., • Full understanding of the safety issues associated with working at high power RF and X-ray generating equipment that are common in this work environment. Required Experience, • Bachelor of Science in Electrical Engineering or related engineering discipline., • Five years RF and/or Radar experience including:, • Field installation and testing, calibration, troubleshooting and acceptance testing., • Design and development engineering., • Project management., • Developing and testing RF systems up to and including Ka-Band., • RF to millimeterwave frequency measurements. High power RF measurement and high voltage troubleshooting is desired., • Mission Operations and Weapons test range systems experience, desired., • Physical ability to climb and work at heights., • The flexibility to work occasional non-duty hours or on weekends to support specific project or mission requirements., • Must be able to relocate to the United States Army Kwajalein Atoll, Marshall Islands., • Must be able to obtain and maintain a U.S. passport, • Must be able to obtain and maintain a DoD Secret security clearance, which requires U.S. Citizenship. RGNext offers our team of experienced, professional employees an environment of challenging, stimulating and personally and professionally rewarding career opportunities and growth. Employees enjoy a robust benefit package on day one, which includes medical, dental, vision, disability and life insurances, generous Paid Time Off and holiday pay, a retirement savings plan with a company match and vesting on day one! Other benefits include flexible scheduling, access to on-base fitness centers and more! We are committed to providing employees a quality work/life balance in a productive, evolving environment. Note: This job description describes the general nature of the duties and requirements of the job. It is not intended to be an exhaustive list or to limit the supervisor's ability to modify work assignments as appropriate. Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state or local laws.

Job Description Position: Clinical Accessioner Employment Type: • Full-time 40 hours/week, • Perform routine clinical specimen processing using validated methods and procedures, • Receive, unbox, and accession human specimens for processing by the clinical laboratory staff., • Clean and prepare specimens for entry into the clinical workflow., • Enter specimen information into LIMS and internal software for specimen tracking., • Does not deviate from clinical procedure., • Safeguards the confidentiality of all patient information, • Must take annual HIPPA training course and abide by all HIPPA regulations, • Operate with the safety of themselves, co-workers, and patients in mind, • Use sterile technique for any sample manipulations, • Adhere to all safety precautions and proper use of personal protective equipment, • Contribute to the organization and cleanliness of the laboratory, • Maintain laboratory supplies and participate in a bi-weekly inventory assessment, • Collaborate with office manager to facilitate ordering, tracking, and documentation of receipt for all items identified during inventory assessment., • Clean and sanitize laboratory equipment and surfaces, • Assure all processes meet quality control standards, • Preferred Experience, • Prior clinical accessioning experience, • Sterile technique, • Basic computer skills, • Ability to, • Demonstrate attention to detail, • Focus on the task at hand, • Work efficiently in a high throughput environment, • Prepare clear, concise reports and communicate effectively, • Work as a team member, • Communicate with sales, lab, and patients in a respectful and productive manner, • Physical abilities, • Ability to stand or sit for long periods of time, • Manual dexterity to operate computers, pipettes, equipment monitors, etc., • Repetitive use of hands and fingers to grasp, • Occasional stoop, reach and kneel motions, • High school Diploma or equivalent at minimum (GED). It is the policy of Alimetrix, in accordance with all applicable laws, to recruit, hire, train, and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, disability, genetic information, sexual orientation, veteran status, or any other basis prohibited by applicable law. Job Posted by ApplicantPro

Description The Space Division at Leidos has an opening for a Test Engineer to work in our Huntsville, AL facility. This is an exciting opportunity to use your experience to develop and execute tests for verification and validation of flight hardware performance. Primary Responsibilities This position will be responsible for gathering requirements, defining test parameters, test stand design, hardware and instrumentation specification, and setup and operation of test stands. The candidate is required to perform test planning, test execution, scheduling, and resource management. The candidate will work with both ground support equipment and the flight hardware to perform the required test and gather test data for acceptance testing. They will create test plans, procedures, and support engineering review boards. The candidate will work in an office and cleanroom environment. Basic Qualifications • Requires Bachelor of Science degree in Engineering., • Candidate must have a minimum of 4 years of related experience in hardware testing, data gathering, and instrumentation., • Candidate must have experience in HW/SW interfaces and data gathering., • Candidate should have demonstrated experience integrating ground support hardware into test environment to display and record test data., • Candidate must have experience with data gathering using multiple types of sensors, typically recording voltage and/or current., • Candidate should have experience with cabling, instrumentation, basic electrical knowledge of DC circuits, and troubleshooting skills., • Candidate should have experience with writing and executing detailed step by step instructions. Preferred Qualifications • Experience working on NASA flight hardware is desired., • Experience working in an AS9100 quality system is desired., • Ability to work well with cross-functional teams, design engineers, analysts, manufacturing, project management and customer representatives, • Experience working in a cleanroom environment, • Excellent verbal/written communication skills, and ability to work with multiple interfaces, • Understanding and basic troubleshooting skills of test instrumentation., • Experience with high pressure pneumatic systems and related components., • Experience with hydraulic systems and components. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:September 26, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $85,150.00 - $153,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Job DescriptionBenefits: • Flexible schedule, • Paid time off At American Family Care, our Medical Assistants are the heartbeat of the clinic blending clinical skill, patient service, and front-desk/insurance verification expertise to keep our centers running smoothly. Whether youre triaging a patient, drawing blood, or ensuring accurate insurance eligibility, youll play a key role in delivering care and ensuring our services are paid correctly. If you thrive in a fast-paced urgent care or medical office setting, adapt quickly, and pride yourself on both accuracy and compassion, we want you here. What youll do • Clinical Care: Greet and triage patients, collect vitals/histories, perform venipuncture and CLIA-waived point-of-care testing (COVID, flu, strep, glucose, A1C, UA, etc.), assist with minor procedures, wound care, EKGs, and nebulizer therapy., • Insurance Verification & Front Desk: Register patients, verify insurance eligibility, determine financial responsibility, collect co-pays, reconcile payment logs, and maintain EMR accuracy., • Patient Service: Educate patients on both clinical procedures and financial expectations, provide clear discharge instructions, and de-escalate concerns with empathy and professionalism., • Completion of an accredited Medical Assistant program., • Active national MA certification (CMA, RMA, CCMA, or equivalent) at hire., • At least 1+ year of experience with insurance verification and patient registration recommended., • Current Basic Life Support (BLS) certification (or ability to obtain before starting)., • Urgent care or emergency room experience highly valued., • EMR proficiency (Experity preferred); comfort with payer portals (e.g., Waystar)., • Must successfully pass a drug screen and criminal background check as a condition of employment., • Full availability including ability to work evenings/weekends and float to nearby centers as needed.Why Youll Love Working Here, • Competitive pay and benefits package., • Opportunities for professional growth and cross-training., • Collaborative, supportive, patient-first team culture. American Family Care provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. AFC is committed to pay equity and transparency. The expected pay range for this role is $XX.XX $XX.XX per hour. Final compensation offers will be determined based on a combination of factors, including experience, certifications, education, and geographic location. In addition to base pay, AFC offers a competitive benefits package and advancement opportunities (varies by PRN/part-time status).

Description Job Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! Leidos’ Defense Systems is seeking a Electrical Engineer to join our team supporting the Strategic Program Office. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos provides responsive, cost-effective engineering, scientific and IT solutions. The selected candidate will support the Common Hypersonic Glide Body program (C-HGB). The C-HGB is the Army’s #1 priority for strategic weapons capability for long-range precision fires and will counter and gain a lead on our adversaries' technological advances in this field, come join us in this exciting, cutting-edge field. If this sounds like the kind of environment where you can thrive, keep reading! Leidos Defense Systems Sector provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world’s toughest security challenges for customers with “can’t fail” missions. To explore and learn more, click ___! Are you ready to make an impact? Share your resume with us today! Primary Responsibilities. The successful candidate will serve as an Electrical Engineer that will handle aspects of Radio Frequency (RF) Engineering production of Hypersonic Glide Bodies (HGB). The selected candidate will be expected to provide leadership and technical direction related to RF components associated with the Hypersonic Missile production program. With a product focus, the individual is also expected to actively partner with other Engineers, Project Managers, Technicians, Customers, and Sub-Contractors to develop solutions that adhere to a diverse set of requirements. The selected candidate will support resolution of technical issues that are discovered during the manufacturing and test of deliverable hardware. Duties will include supporting design activities, including design for manufacturability, with our Design Agent, developing Test Requirements Documentation, developing Test Plans, supporting the development of Production Test Procedures, supporting testing and troubleshooting events that occur. In addition, the candidate will support development of future RF designs by assisting in developing Test Requirements, developing hardware and software requirements to perform testing, develop test methods and procedures to meets test requirements, and develop Technical Data Package for delivery to customers. In addition, the candidate will need to write/issue Non-Conformance Reports and address quality issues during the Environments Testing process. Work will be conducted in an integration/production facility along with a laboratory environment. Travel to Sandia National Labs and other production and test facilities as necessary. Basic Qualifications. A Bachelor’s degree in Electrical Engineering from an ABET accredited school with at least 8+ years of relevant experience or a Master’s degree in Electrical Engineering from an ABET accredited school with at least 6+ years of relevant experience is required. Preferred Qualifications. The following skills/abilities are desired: * Demonstrate an understanding of design and testing of RF components including Antennas (CRPA and Directional), LNAs, RF Switches, Splitter/Combiners, Duplexers, Couplers and Cables * Demonstrate an understanding of RF Test Data * Must have hands-on laboratory experience with instrumentation, test equipment, and test methods including the use of Network Analyzers, Spectrum Analyzer, Power Meter, etc. * Knowledge of Matlab * Knowledge of Test Procedure development * Knowledge of post data processing * Organizational skills to document designs, assist with Technical Data Packages (TDP) and support production and test of RF Components and Receivers Candidate must be a resident of the North Alabama area or willing to relocate to the Huntsville - North Alabama, AL area. Other Qualifications: The ideal candidate would have experience in the following: * GPS Test Experience including M Code and Anti-Jamming techniques * Design, test, troubleshooting, and manufacture of analog/mixed signal electronic circuit card and/or integrated RF assemblies * Experience with manufacturing and production of RF components * Experience or knowledge of RCC 324 Range Reequipments for Global Positioning and Inertial Measurements Range Safety Tracking Systems Commonality Standard * Have a current DoD Secret clearance. Security Requirements: Candidate must be a US Citizen and possess (and be able to maintain) a Final Secret Clearance or meet the eligibility to obtain (and maintain) a Secret Clearance. At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. September 3, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $104,650.00 - $189,175.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description The Airborne Systems Business Area in the Leidos Defense Sector currently has a special job opening for a capable Flight and Mission Software Development Lead to work onsite in our Huntsville, AL office. This is an exciting and unusual opportunity to use your knowledge, skills, experience, and insight to launch the next phase of your career at Leidos by leading a talented software team through the software development life cycle (SDLC) to produce solutions for the nation’s leading advanced defense technologies such as manned aircraft software, tactical strike systems, sensors, computer vision, uncrewed air systems (UAS), counter UAS, mission planning, command/control/communications (C3), platform autonomy, network collaborative autonomy, aerial refueling, and flight management systems. Leidos is dedicated to making the world a safer place. This starts with helping our customers in the Defense Industry achieve their critical missions. Our dedicated Defense Group employees are solving critical challenges across the globe. At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. With offices across the United States engaging in the defense, space, cyber and commercial fields, Leidos provides responsive, cost-effective engineering, scientific and IT solutions. Leidos is well known for our people-oriented culture, positive work environment, technical excellence, and resilient business ethics. Primary Responsibilities. • This leadership position is dynamic, requiring assertiveness, strong technical competence, flexibility, impeccable prioritization abilities, personal drive and energy, and self-discipline. Working in this position, your workday will span jobs such as leading a Software Integrated Product Team (IPT), working across technical functions on cohesive integrated solutions on complex integrated systems, providing software program management, working closely with software and computing hardware architects, overseeing software systems engineers and lead software test engineers, and serving as Agile Product Owner., • Product development will span the technology stack from high-level user applications to mission software to low-level embedded solutions to the computing hardware. Hardware may span front end tablets and laptops, rugged mission computers, high-performance servers, single-board computers (SBC), systems-on-chip (SoC), systems-on-module (SoM), custom printed circuit board assemblies (PCBA), and microcontrollers (MCU). Software capabilities span criticality levels and perform functions such as mission execution, power and thermal monitoring, sensors and instrumentation, telemetry, command and control, communications, networks, mission planning, and system infrastructures., • This position will involve regular and direct contributions to proposals. This includes devising technical solutions, determining the approach to execution, schedule planning, software size and cost estimation, developing basis of estimates, team sizing, skills and staff planning, computer hardware and software requirements elicitation and analysis, and materiel planning., • Direct communication with customers, end users, internal stakeholders, and team members will be required on a frequent basis., • In this position you will enjoy significant influence on positive outcomes and a strong sense of purpose working directly on fieldable systems that are key to the nation’s defense. Basic Qualifications. • A Bachelor's Degree or higher degree in Software Engineering, Computer Engineering, Computer Science, Management Information Systems, Computer Information Systems, Electrical Engineering, Aeronautical Engineering, Aerospace Engineering, Mathematics, Physics, or a related technical field is required., • Candidate should have 8+ years of relevant technical experience., • Candidate should have 3+ years or relevant experience leading teams and managing resources for software development., • Excellent communication (verbal and written) and team leadership skills., • Candidate must demonstrate their ability to work independently, collaborate closely with team members, discern efficient roles and tasks for their team members, think critically, act confidently and judiciously, exercise impeccable judgement, consistently make rational decisions, and impart a productive sense of urgency to others., • Experience in development of software products or simulations using C, C++, Rust, C#, or Java is required. Candidate must articulate strong competency in development in at least one of these programming languages, object-oriented design principles, and troubleshooting., • Experience working on one or more final products that went beyond prototypes, demonstrations, test beds, or internal/lab use only. The candidate’s prior experience must exist on software products, integrated systems, or simulations that were released and fielded as either a product itself, used operationally on an integrated system, or released and used independently by individuals other than those who developed it., • Proficient with efficient use of peer reviews and evaluations of software development plans, specifications, requirements management, architectures, designs, source code, unit tests, verification plans and procedures., • Familiar with practices associated with successful software supplier or subcontractor management, and basic contract requirements methodology (e.g., SOWs, SLAs, and CDRLs)., • Fundamental and working knowledge of software configuration management, code repositories and build system components, such as DevOps, CI/CD pipelines, CMake, GitLab, Docker, and virtualization tools (e.g., VMWare, QEMU, VirtualBox, Hyper-V)., • Fundamental and working knowledge of general purpose operating systems (Linux, UNIX, and/or Windows) and practical knowledge of their respective development tools/IDEs, scripts, debuggers, and administrative features., • Understanding of the software development life cycle, its phases, life cycle models, metrics or performance indicators, and techniques for rapid development while ensuring high-quality solutions and on-time results., • Able to multi-task and willing to work with teammates to contribute directly to industry events, white papers and competitive proposals., • Basic understanding of software engineering process and the appropriateness of its use, application, and proper methods of tailoring., • Basic understanding of systems engineering principles and practices relevant to software. Clearance Qualification. • Candidate must be a U.S. Citizen with the ability to obtain and maintain a Secret Security Clearance (interim and final). Preferred Experience, Skills or Abilities. • Software Development: Experience with planning, specification, design, development, integration, installation/deployment, and maintenance of software for airborne systems, mission planning systems, missile/weapon platforms, uncrewed or autonomous systems, and/or ground control/support systems., • User Experience Programming Languages: Basic knowledge in one or more programming languages used in applications and front end software, such as Python, .NET/C#, Java, C++, Qt, Swift/Objective-C, and XML., • Agile Development: Experience as Product Owner, Scrum Master, or Developer performing software product development using Agile development methodologies within one or more Agile tools such as Atlassian Jira, Trello, Monday.com., • Problem-Solving: Ability to comprehend changes, characterize impact and assess risk to plans or existing solutions, estimate their level of effort and resources, describe (written and verbal) courses of action (COA) or decision analysis, and facilitate team consensus., • Collaboration: Work responsibly, reliably and independently in a fast-paced, open, collaborative cross-functional cross-organizational environment without direct oversight., • Transparency: Elicit, accept, and provide constructive informal feedback amongst other team members to uphold technical excellence and quality workmanship. Other Qualifications • Rapid Flight Systems Development. Experience with Agile/Scrum, unmanned aircraft or robotics, embedded development, design and implementation of operational flight software, digital communications, real-time development, and software safety., • Qualification Testing. Knowledge of various development tools for software qualification testing, requirements management, build and release, unit testing, regression testing, configuration management, and issue tracking are beneficial., • Mission Support: Devise new concepts for computing infrastructure and automation to support ground test facilities, integration labs, data collection and analysis, autonomous logistics, and operator training., • Embedded Software: Understanding of fundamentals of critical or time-sensitive software for integrated systems, such as real-time software, hardware-in-the-loop simulation, vehicles, medical devices, or IoT components., • Specialized Areas: Experience with autonomous systems, electrical and software interface design, interface control documents, or avionics is beneficial. If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:September 18, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $126,100.00 - $227,950.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Job Description Custodian/ Maintenance Worker Highlights Location: Huntsville, AL Position Type: Contract/ contract to hire Schedule: First shift - 8:00am start time Hourly / Salary: Based on experience Residency Status: US Citizen Our client is in need of a custodian/ maintenance worker. Job Description: • The Custodial/ Maintenance Employee shall perform duties as specified in conformity with policies established by the client's handbook., • Hours: Our normal working hours are Monday thru Thursday 8AM - 5:30 PM and Friday 8 AM - 12:00 PM (40 hours). However, these hours need to be flexible due to special events which could occur on or off campus and we could be called on to support. We also work some weekends (including Sundays) to perform deep cleaning when there aren’t as many people on the worksite., • Preferences will be given to candidates who can demonstrate through their experiences and accomplishments:, • The ability to handle multiple tasks and various situations in a calm and professional manner, • The ability to work well under pressure and meet deadlines, • A sensitivity of and commitment to cultural diversity Skills Required: This job needs experienced and focused candidates who: • Have a proven record of working in this type of job., • Possess knowledge of the proper use of cleaning supplies., • Are able to handle multiple tasks assigned., • Are able to lift 50 lbs., • Are able to stand, walk, lift, stoop and bend for prolonged periods., • Are able to use common hand tools., • Perform general housekeeping of buildings., • Operate equipment/machinery such as buffers and vacuum cleaners., • Keep buildings and assigned areas in a clean and orderly condition., • Possess knowledge of the proper use of cleaning supplies., • Follow procedures and directions for the use of chemical cleaners., • Clean, sanitize and disinfect restrooms to include toilets, urinals, sinks, walls, mirrors, fixtures, doors., • Clean and sanitize all contact surfaces., • Clean/clear blocked sink drains and toilets., • Clean doors, grates, kickplates, and partitions., • Mop restroom, classroom, breakroom, conference room and hallway floors., • Dust and clean display bulletin boards, furniture, woodwork, fixtures, windows, window blinds and other equipment., • Stock and maintain supplies in restrooms and other assigned areas., • Vacuum and spot-clean carpets., • Empty and clean waste receptacles and dispose of trash appropriately., • Maintain outside areas including sweeping or washing sidewalks and walkways and picking up debris from the perimeter of the buildings., • Perform routine maintenance on custodial equipment., • Disinfecting and sanitizing bathrooms, office and classrooms as directed., • Perform general maintenance functions to include:, • Replace incandescent and fluorescent light bulbs., • Sweep, mop, strip, wax, and buff tile floors., • Ensure proper care in the use of maintenance and power equipment., • Spray offices/classrooms/labs with insect repellant as needed., • Keep storage areas neat and orderly., • Process maintenance requests as assigned, • Assist in moving equipment and furniture., • Assist with cleaning, set-up, and facility preparation for special meetings or events, to include moving/arranging furniture and equipment., • Perform other work-related responsibilities as assigned by the Maintenance Lead, Director of Operations and/or the President Required Education & Experience: • High School diploma or GED equivalent, • 1 year experience in custodial work, • Some general maintenance experience and the ability to use common hand tools preferred "We are GTN – The Go To Network" Company DescriptionWho We Are GTN is the leader in technical staffing, leveraging innovation to drive next-generation recruiting to Fortune 2000 companies. What We Do We provide Scalable Technical Staffing solutions encompassing SOW, staff augmentation, and direct hire placement for Fortune 2000 companies, with niche service offerings in Cyber Security, Digital, Field Services, and Professional Services. Our recruiting teams are specialized, certified, and have endured rigorous technical boot camps and ongoing required educational courses and meetups. What Proof We Have We have experience in scalable IT Staffing since the year 2000. Our IT experts have helped Fortune 2000 corporations embrace the cybersecurity and digital space, with many of our experts remaining on contract with clients for 8+ years. Our staffing experts have been engaged to speak at cybersecurity conferences, and our teams are certified and specialize in divisions focused around cyber, digital, field, and professional services. Why People Want It Our valueWho We Are\r\nGTN is the leader in technical staffing, leveraging innovation to drive next-generation recruiting to Fortune 2000 companies.\r\n\r\nWhat We Do\r\nWe provide Scalable Technical Staffing solutions encompassing SOW, staff augmentation, and direct hire placement for Fortune 2000 companies, with niche service offerings in Cyber Security, Digital, Field Services, and Professional Services. Our recruiting teams are specialized, certified, and have endured rigorous technical boot camps and ongoing required educational courses and meetups.\r\n\r\nWhat Proof We Have\r\nWe have experience in scalable IT Staffing since the year 2000. Our IT experts have helped Fortune 2000 corporations embrace the cybersecurity and digital space, with many of our experts remaining on contract with clients for 8+ years. Our staffing experts have been engaged to speak at cybersecurity conferences, and our teams are certified and specialize in divisions focused around cyber, digital, field, and professional services.\r\n\r\nWhy People Want It\r\nOur value

Job Description Under the supervision of the Operations Manager, the Service Technician serves customers by performing Factory-authorized Start-up Service and In-service Warranty and Maintenance of HVAC systems and our other represented products. This position delivers a positive customer experience by providing premier start up and commissioning of new products, identifying system issues, completing necessary repairs and helping to maintain equipment to factory specifications. RESPONSIBILITIES: This role is responsible for the following: • Serving existing customers by investigating complaints, conducting tests and resolving problems., • Establishing service by studying system requirements, ordering and gathering components and parts, completing the installation, and performing acceptance tests., • Maintaining rapport with customers by examining complaints, identifying solutions, suggesting improved methods and techniques, and recommending system improvements., • Documenting service and installation actions by completing forms, reports, logs, and records., • Updating job knowledge by participating in educational opportunities and reading professional publications., • 3-5 years' experience in the HVAC industry., • Acceptable driving record to be able to access DOD and other Government facilities., • EPA 608 certification required. This is official recognition by the EPA that a technician is knowledgeable about the laws and regulations on use and handling of ozone-depleting substances (ODSs) such as refrigerants., • Communication (oral): Speaks clearly and persuasively. Listens and gets clarification. Responds well to questions. Demonstrates group presentation skills. Participates in meetings., • Communication (written): Documents clearly in reports what work was performed or what is required in a fashion that can be sent to our customers. Job Type: Full-time Compensation: Pay commensurate with experience. Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Vision insurance, • EAP, • Pet Insurance, • STD/LTD, • Critical Illness/Accident, • PTO Work Location: Service Area Physical Demands/Work Environment: The employee must regularly lift and /or move up to 50 pounds. The individual must be capable of reviewing their work for errors and making adjustments as necessary. This position works indoors and outside in various settings, including rooftops accessed by ladders. Company DescriptionAt Hobbs & Associates, our greatest asset is our people. We know that when we invest in our team, everything else falls into place — top-tier service, lasting client relationships, and a company culture built on trust and expertise. Whether you’re an experienced HVAC professional or just starting your journey, you’ll find more than just a job here — you’ll find a long-term career path. We offer hands-on training, growth opportunities, and a work environment where your skills and ideas are valued. From field technicians to office staff, every role plays a vital part in our mission to lead the HVAC industry through innovation, service excellence, and genuine teamwork. If you’re looking for a place where you can make an impact, grow your craft, and be part of something bigger — we’d love to meet you.At Hobbs & Associates, our greatest asset is our people. We know that when we invest in our team, everything else falls into place — top-tier service, lasting client relationships, and a company culture built on trust and expertise.\r\n\r\nWhether you’re an experienced HVAC professional or just starting your journey, you’ll find more than just a job here — you’ll find a long-term career path. We offer hands-on training, growth opportunities, and a work environment where your skills and ideas are valued.\r\n\r\nFrom field technicians to office staff, every role plays a vital part in our mission to lead the HVAC industry through innovation, service excellence, and genuine teamwork.\r\n\r\nIf you’re looking for a place where you can make an impact, grow your craft, and be part of something bigger — we’d love to meet you.

Job Description We are seeking a commercial construction superintendent to join a growing team and highly regarded company. For this position you must be able to travel to project sites across the Southeast. The project you will be working on will be primarily large-scale multifamily construction projects. Job Responsibilities: • Ensure projects are completed on time and under budget., • Initiate company safety protocols and ensure that all company safety and OSHA standards & guidelines are observed at all times as well as other applicable Federal, State, and Local regulations and standards., • Gain/maintain a thorough knowledge and understanding of the project scope and its intent., • Provide leadership and on-the-job training opportunities to team members., • Ensure building codes and regulations are met., • Perform preconstruction job responsibilities., • Serve as the point of contact on-site for the owner, consultants, subcontractors, and inspection agencies., • Manage all subcontractor work on a project including work put in place, submittals, punchlist items, schedules and safety audits., • Work hand in hand with project management on maintaining budget and understanding site impacts that have cost implications to the project. Qualifications: ● Minimum 5 years of superintendent experience required. ● Must be able to run projects start to finish/ground up. ● Minimum 2 years’ experience in large scale multi-family/hospitality construction required. ● Proficiency in Microsoft Office. ● Experience with scheduling software is preferred. ● Proficiency/experience with Procore is preferred. ● Construction related Bachelor degree is preferred. Benefits: ● Health insurance ● Dental insurance ● Paid holidays and PTO ● 401(K) retirement plan ● Bonus potential ● Competitive Pay

Job DescriptionDescription • We're looking for a Water/Wastewater Project Manager to join the HMB team! Engaged professionals lies at the heart of our vision statement. That’s why we strive to create a work environment that challenges and inspires our employees, igniting their passion and drive to achieve greatness each and every day. Opportunities available in Alabama, Tennessee, and Kentucky. Key Responsibilities • Manage the planning, design, and delivery of water and wastewater infrastructure projects, including pipelines, pumping stations, storage facilities, and treatment plants, • Oversee project teams and coordinate efforts between engineers, consultants, contractors, and regulatory agencies to ensure successful project execution, • Monitor project timelines, budgets, and scopes to ensure alignment with client goals, regulatory requirements, and company standards, • Review technical designs and documentation prepared by engineering teams to ensure quality, constructability, and compliance with applicable codes and regulations, • Lead feasibility studies and infrastructure planning efforts to assess future needs based on population growth and development trends, • Evaluate and select appropriate treatment technologies and design approaches in collaboration with technical experts, • Develop and manage contracts, procurement processes, and administration activities, • Communicate with clients and stakeholders to provide project updates, resolve issues, and align on expectations throughout the project lifecycle, • Ensure all work adheres to local, state, and federal regulations, and coordinate necessary permitting and approvals, • Prepare and review technical reports, cost estimates, risk assessments, and other project documentation, • Conduct cost-benefit and life-cycle analyses to support infrastructure investment decisions and funding strategies, • Collaborate with business development teams on proposals, project scoping, RFP responses, and client presentations Skills, Knowledge and Expertise • BS or MS in Civil Engineering, • Registration as a licensed Professional Engineer, • Experience designing water treatment plants, in part or in whole, a plus, • 10+ years of experience in public infrastructure projects related to Water Resources field, • Project and / or Client Management experience is required, • Ability to guide junior staff as well as participate in the design and detailing of all aspects of small- to large-scale multi-discipline water/wastewater projects of varying technical complexity, • Proficiency with Microsoft Office programs: Word, Excel, PowerPoint, and Outlook, • Excellent verbal, written, and interpersonal communication, as well as time management skills, • Strong sense of urgency and self-initiative to meet deadlines and other assigned project parameters, • Detail-oriented team player with an ability to contribute to a positive work environment Benefits • Excellent compensation package, • Flexible work schedule, • Ability to work hybrid work schedule, • Competitive holiday and paid-time-off programs, • 401(k) Plan and Match, • Competitive health, vision and dental insurance premiums, • Company-furnished life insurance, • Short and Long-term Disability, • Parental Leave, • Variety of voluntary benefit options, • Employee Assistant Program (EAP), • Flexible Spending Account, • and More#LI-MK1

Job Description We are seeking a commercial construction superintendent to join a growing team and highly regarded company. For this position you must be able to travel to project sites across the Southeast. The project you will be working on will be primarily large-scale multifamily construction projects. Job Responsibilities: • Ensure projects are completed on time and under budget., • Initiate company safety protocols and ensure that all company safety and OSHA standards & guidelines are observed at all times as well as other applicable Federal, State, and Local regulations and standards., • Gain/maintain a thorough knowledge and understanding of the project scope and its intent., • Provide leadership and on-the-job training opportunities to team members., • Ensure building codes and regulations are met., • Perform preconstruction job responsibilities., • Serve as the point of contact on-site for the owner, consultants, subcontractors, and inspection agencies., • Manage all subcontractor work on a project including work put in place, submittals, punchlist items, schedules and safety audits., • Work hand in hand with project management on maintaining budget and understanding site impacts that have cost implications to the project. Qualifications: ● Minimum 5 years of superintendent experience required. ● Must be able to run projects start to finish/ground up. ● Minimum 2 years’ experience in large scale multi-family/hospitality construction required. ● Proficiency in Microsoft Office. ● Experience with scheduling software is preferred. ● Proficiency/experience with Procore is preferred. ● Construction related Bachelor degree is preferred. Benefits: ● Health insurance ● Dental insurance ● Paid holidays and PTO ● 401(K) retirement plan ● Bonus potential ● Competitive Pay

Job Description If you are a motivated individual with a passion for cleanliness and maintaining a safe environment, we encourage you to apply for this position. Good job for someone retired, or who works already and wants to pick up a couple of extra hours per week. Overview: We are currently seeking a dedicated and detail-oriented Janitor/Cleaner to join our team. As a Janitor/Cleaner, you will be responsible for maintaining the cleanliness and appearance of various facilities. This is a vital role in ensuring a safe and sanitary environment for employees and visitors. Duties: • Perform office cleaning tasks, including sweeping, mopping, and dusting, • Clean and maintain restrooms, break rooms, and other common areas, • Empty trash receptacles and replace liners, • Clean windows, glass surfaces, and mirrors, • Perform floor care duties such as vacuuming, buffing, and waxing, • Follow established cleaning procedures to ensure consistent results, • Report any maintenance or repair needs to the appropriate personnel, • Adhere to all safety guidelines and protocols Skills: • Previous experience in commercial or custodial cleaning, • Ability to work independently with minimal supervision, • Strong attention to detail and organizational skills, • Excellent time management skills to complete tasks within designated timeframes, • Good communication skills to interact with team members and clients Job Types: Part-time Expected hours: 10 to 30+ hours per week Benefits: Flexible schedule Schedule: Day Shift Evening shift Night shift Work Location: In person

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers — large and small — package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust Location: 222 Celtic Drive Madison AL 35758 Schedule: Monday-Friday, in office The Senior Accounting Associate is responsible for maintaining all accounting records and producing timely reports, analysis, and statements in accordance with company policies and generally accepted accounting principles. PRINCIPLE ACCOUNTABILITIES: • Post entries accurately and completely to the general ledger and verifies and balances general ledger accounts., • Post, validate and process accounts payable transactions including the preparation of batch payment., • Post, audit and collect accounts receivable transactions by making adjustments and corrections as appropriate., • Follow up on customer accounts including customer credit issuances and collection activity as needed., • Provide support with the processing of weekly hourly payroll., • Assist in preparations of month end closings of the financials for the plant., • Issue daily reports of financial matters, discrepancies, or irregularities to Controller as assigned., • Maintain accounting and payroll files and backup documentation in accordance with PCA’s record keeping policies., • Provide general administrative support including electronic and physical file organization and retrieval, copying materials and conducting electronic or fax correspondence as needed., • Respond to corporate requests and cyclical filings in accordance with the Controller’s direction. Maintain follow-up system to ensure timely submission of requirements. BASIC REQUIREMENTS: • Education equivalent to high school diploma required., • Three (3) years’ previous work experience in a business office / accounting function with exposure to general ledger, payroll, and/or accounts payable functions., • Previous experience using automated accounting/payroll system., • Strong working knowledge of computer systems such as Microsoft Office preferably with exceptional knowledge of Microsoft Excel. PREFERRED REQUIREMENTS: • Associates degree or college accounting coursework., • Previous experience in the manufacturing sector, containerboard and corrugated packaging industry., • Experience with financial systems for invoicing, credit/collections, expense reporting, accounts payable, payroll, and general ledger., • Previous Ceridian/Dayforce payroll processing experience. KNOWLEDGE, SKILLS & ABILITIES: • Strong working knowledge of accounting procedures., • Strong organizational skills with the ability to handle numerous details, deadlines, and requests., • Ability to work in a fast paced, deadline-oriented environment, prioritize assignments, and handle multiple projects and/or requests concurrently., • Strong analytical skills with the ability to handle detail oriented tasks and review multiple documents and reports., • Able to work in a fast paced, deadline-oriented environment and handle multiple requests simultaneously., • Strong appreciation for the retention and management of confidential information., • Above average written and verbal communication skills with the ability to communicate to multiple audiences and purposes., • Strong listening, evaluating, and organizational skills., • Able to work flexible hours or overtime as needed. PCA is an Equal Opportunity Employer – Veterans/Disabled and other protected categories.

Job DescriptionSalary: 35-40 When looking to work for a mechanical services company, why not look to Hardy Services, the experts who have been providing mechanical services for over 80 years. Do you have a "Customer First" mindset? Are you a self-starter who can work independently? Do you believe in doing the right thing, the right way, every time? Are you only happy when the job is done and done correctly? Then Hardy Services may be the place for you! We are currently seeking a service-oriented, reliable, hard-working, team-player to join our HVAC Team. HVAC SERVICE TECHNICIAN/HVAC MECHANIC (NORTH ALABAMA) Responsibilities • Complete Preventative Maintenance tasks and inspections of HVAC equipment, • Repair or replace defective equipment, components, or wiring on HVAC equipment, • Reading of and understanding of control wiring for HVAC equipment, • Troubleshoot issues as they arise, • Perform emergency repairs promptly and efficiently, • Comply with safety regulations HVAC SERVICE TECHNICIAN/HVAC MECHANIC (NORTH ALABAMA) Qualifications • 10 years minimum experience in installation and repair of Commercial HVAC equipment, • Knowledge of chillers, boilers, air handlers, and Commercial HVAC systems, • Knowledge of control and equipment sequence of operations, • Knowledge of package units up to 90 tons, • Previous Hospital experience is a plus, • Data room equipment experience (Liebert and Data Air) is a plus, • VRF installation and repair is a plus, • Communication and customer service skills, • Computer skills in using Microsoft office and/or iPad is a plus, • Clean driving record, • Limited travel may be required, • Must be able to pass a drug screen, • Authorized to work in the United States Benefits • Competitive Pay, • Bonus Opportunities, • Health Insurance, • 401k or other retirement options, • Fully stocked Fleet Vehicles (Company provides tools), • Company Phone (iPhone), • Vacation Accruals, • Paid Holidays, • 8 hour shift, • Day shift, • Monday to Friday, • On call, • Overtime as needed Hardy Services is an employee-owned business based in Birmingham, Alabama. We have been servicing the State of Alabama for over 80 years are working towards continuing a lasting legacy of Making Life Better for our employees, our customers, and the community. remote work

Job Description Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is your trusted partner providing single-sourced custom solutions for complex infrastructure development. With more than 500 team members across the Southern United States, TTL provides a wide range of services, including civil engineering; transportation design and CEI; geotechnical engineering; environmental consulting; construction materials engineering and testing; and surveying, GIS, and mapping. At TTL, we are driven to serve our clients, driven to serve our communities, and driven to serve our people. TTL not only provides a great work/life balance, but we provide excellent employee benefits such as a robust health & dental plan, vision, 401(k), flexible spending accounts, and generous paid time off (PTO) accrual. For more information, please go to . Build your legacy at TTL Construction Materials Senior Project Technician —Multiple Locations The Senior Project Technician plays a crucial role in ensuring the quality and integrity of construction projects. The Senior Technician will monitor, observe, and sample construction materials, adhering to industry standards (ASTM, AASHTO) and project specifications. The Senior Technician will work closely with other TTL Project Technicians, project teams, providing accurate data and insights to support project success. Key Responsibilities: • Field Monitoring and Testing:, • Observe and monitor various construction activities, including subgrade preparation, structural fill placement, proofrolling, footing excavation, reinforcement installation, and concrete/asphalt placement., • Collect samples of fresh concrete and other materials for laboratory testing., • Perform field density tests on soils, aggregates, and asphalt., • Conduct critical inspections of construction elements such as reinforcement, post-tension elements, masonry, and wood framing to ensure compliance with plans, specifications, and local building codes., • Ability to identify and provide some technical decisions related to project challenges., • Perform additional specialty testing on projects such as floor flatness, Windsor Probe testing, concrete coring operations, etc., • Data Collection and Reporting:, • Maintain accurate and detailed field notes, documenting observations and test results., • Prepare clear and concise reports summarizing field and laboratory findings., • Utilize specialized software to log and analyze data., • Equipment and Safety:, • Operate and maintain field and laboratory testing equipment according to company standards, manufacturer recommendations, and industry standards., • Adhere to all safety protocols and participate in safety training programs., • Maintain a clean and organized work environment., • Communication and Collaboration:, • Communicate effectively with project managers, engineers, contractors, and other stakeholders., • Provide timely updates on field observations and test results., • Collaborate with team members to identify and resolve potential issues., • Build and maintain effective internal and external working relationships with coworkers and TTL’s clients., • Supervise and work alongside other technicians in the field to provide additional quality control and quality assurance., • Provide mentorship to other technicians., • Professional Development:, • Pursue continuing education opportunities to enhance technical skills and knowledge., • Obtain relevant certifications as required (e.g., ACI, DOT, ICC, and/or NICET certifications)., • Obtain laboratory experience working with soils, aggregates, concrete, and masonry materials., • TTL will provide safety training and certification preparatory training including:, • 10-Hour OSHA Construction, • Advanced certifications including ACI laboratory certification, ICC Special Inspector certifications, and other construction industry related certifications. Qualifications: • Education: High school diploma or equivalent required, some college or technical training in the construction industry is preferred., • Experience: Prior experience (3 to 5 years) in construction materials testing or inspection is required. Must hold a valid ACI Concrete Field Testing Level I certification and Nuclear Gauge Radiation Safety Training., • Skills:, • Strong attention to detail and accuracy., • Ability to work independently and especially in a team environment., • Excellent written and verbal communication skills., • Proficiency in Microsoft Office Suite. Additional Information: • This position requires working outside year-round., • Project schedules often dictate working hours. Therefore, the candidate should understand that work schedules will vary (early mornings, late evenings) and will be hectic at times. Some weekend work may be required. This position is subject to a pre-employment drug and motor vehicle record check TTL is an EEO/AAP employer

Description We are excited to announce our opening for a Principal Material Project Manager on Global Supply Chain team in Huntsville AL supporting our Enduring Indirect Fire Protection Capability program! The Material Project Manager (MPM) will work as part of a team and focus on execution of material strategy across the program by managing open purchase orders, resolving delays, and driving supplier accountability. In addition, the role will include, but not limited to, identifying and mitigating program risks and opportunities as they pertain to material requirements; achieving program material budget objectives; managing program purchase requirements to lead time schedule; participating in sourcing process improvement projects (both Supply Chain and Program); resolving Supply Chain issues for the program and resolving program material cost problems. The MPM reports to the Material Operations & Strategies Associate Director and is directly aligned to the Program Manager and represents Material Operations & Strategies on customer programs. The MPM is an extension of the corporate shared services for supply chain related support. Additionally, the MPM is responsible for all activities associated with researching and recommending cost effective purchase arrangements. The MPM works closely with the Manufacturing organization to ensure the review of purchase requisitions for clarity, compliance, detail, completeness, regulatory compliance and obtain additional information considered necessary; the MPM will also work with the Manufacturing Organization to actively manage the procurement process from the order placement through receipt of products and subsequent payment of invoices. Some travel may be required. Applicant needs to be energetic, resilient, and creative in supporting corporate reporting requirements throughout program manufacturing execution obligations. Must be able to promote a team atmosphere and help cultivate improved communication lines with agile problem-solving solutions. Primary Responsibilities (including but are not limited to): • Lead execution of material strategy across the program by managing open purchase orders, resolving delays, and driving supplier accountability., • Act as the primary interface between Leidos and key suppliers, escalating delivery risks, resolving performance issues and ensuring adherence to contractual requirements,, • The MPM articulates to senior leaders/personnel the value, schedule and decision points that impact the efficient delivery of specific commodities (materials, hardware and software). Provide summary and aid in compilation of program metric data and statistics., • Project management including requirements justification, planning, executing and evaluating the project., • The MPM plays an integral part in the approval process in procurements., • The MPM will use critical thinking skills to propose sound and innovative business solutions to increase operational efficiencies to ensure business area and program success., • The MPM will mitigate and resolve supply chain challenges with priority deliveries and suppliers., • Facilitate supplier negotiations and discussions to resolution with supply chain and program personnel, • Articulate and drive execution of vision and goals for the corporate supply chain team in conjunction with program critical needs, • Risk Management including creating mitigation plans in coordination with the PMO and project team, • Participate in Program Management Reviews, Status Meetings, or other programmatic subcontractor meetings as needed, • Control Account Management including establishing and maintaining a baseline, support EAC/ETC updates, and variance analysis, • Individual should be a self-starter and someone that is flexible and is able to work independently at a higher level. Basic Qualifications • BA degree and 12 – 15 years of prior relevant experience or Masters with 10 – 13 years of prior relevant experience in material project management, procurement, or supply chain execution within Defense, Aerospace, or high-complexity industries. -Strong knowledge of Supply Chain and related systems along with material procurement -Requires strong analytical and creative problem-solving abilities to understand and facilitate complex supply chain decision-making • Expert knowledge of industry practices, advanced techniques and solutions within a professional discipline to develop new standards, processes, and solutions. Serves as a subject matter expert. -Proven ability to be a self-starter and quick learner, capable of supporting efforts to achieve goals -Excellent written and oral communications skills at all levels both internally and externally with customers and suppliers -Ability to work in a fast-paced situation with continuous innovation and flexibility in an on-site manufacturing environment -Excellent risk management methodologies -Must be able to collaborate and effectively influence across multiple functions to achieve supply chain performance requirements -High level of proficiency in MS Office products (i.e. Word, Excel, PowerPoint and Project) -Working knowledge of customer flow through requirements such as AS9100, FAR, ITAR, OFFSET, Foreign Corrupt Practices Act (FCPA) and public law • U.S. Citizenship is required., • Secret Security Clearance or ability to obtain one is required Preferred Qualifications -Supplier relationship management experience -Deltek Costpoint experience -Ability to balance strategic thinking with tactical application of strategies to programs -PowerBI experience -Previous mechanical or electronic manufacturing environment experience a plus Come break things (in a good way). Then build them smarter. We're the tech company everyone calls when things get weird. We don’t wear capes (they’re a safety hazard), but we do solve high-stakes problems with code, caffeine, and a healthy disregard for “how it’s always been done.” October 1, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $112,450.00 - $203,275.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! Leidos’ Defense Systems Sector Aerospace Systems Business Area is seeking a Senior Program EVMS Analyst to support our Universal Stage Adapter (USA) program! This exciting role provides direct Earned Value Management Systems (EVMS) leadership and contribution to critical programs and related portfolios of work. The ideal candidate is recognized as an experienced EVM analyst and leader, with a strong understanding of inter-company functional relationships, who can successfully interface with individual contributors, program finance analysts (PFAs), schedulers, Control Account Managers (CAMs), Program Managers, and line executives. The position provides hands-on EVM support to the program while ensuring compliance with contractual requirements and company policy and procedures. In this role, you will be expected to establish, maintain, and grow key government customer relationships and help drive program growth and execution of the Business Plan. The Senior Program EVMS Analyst position will be an integral part of the larger enterprise-wide Leidos Corporate Earned Value Management (EVM) Center of Excellence (COE), a team-leading and executing the core responsibilities of scheduling, planning, EVMS, the associated infrastructure and tools, implementations, training, and surveillance for Leidos. Primary Responsibilities. • Responsible for the implementation & execution of EVMS policies and practices., • In coordination with the Director of Surveillance, supports internal and external surveillance, audits and reviews., • Responsible for the development, implementation, training, and maintenance of EVMS processes and tools., • Responsible for supporting the organization's EVMS talent development, performance management, and business strategy., • Supports programs in operational decisions and provides advice on enhancing the performance of the portfolio of projects in the organizations., • Aligning and integrating material management and manufacturing practices with traditional scheduling and EVMS best practices for improved program management solutions., • Utilizes expert domain knowledge, professional principles and theories to develop advanced concepts, techniques, solutions and standards., • Supports EVM Team within professional area providing a thorough understanding of EVMS, deliverable content, issue identification/resolution, etc., • Typically negotiates and develop shared solutions to convince internal and external parties to accept concepts, practices and approaches of the area., • Significant interface with Program Managers, Contracts and Senior Technical Personnel, as well as other organizations., • May participate in new business proposals through EVMS requirements, schedule support, and providing input for cost volumes to management Basic Qualifications • Typically requires a BA degree and 12+ years of prior relevant experience, • Experience as the Prime Contractor and/or Major Subcontractor in an Earned Value Management environment, • Must have advanced expertise using Deltek Cobra or OPDEC IPM, • IPMR/IPMDAR development, • Strong Excel Skills (Pivot tables, Lookups, etc.), • Great written and oral communication skills, • Position is Hybrid remote located in Huntsville, Alabama up to 3 days a week in the office in Huntsville. Preferred Qualifications • Experience with NASA customer oversight, • Experience with DCMA audits and surveillance, • Variance Narratives, • Power BI, • Program Management Professional (PMP) certification At Leidos, we don’t want someone who "fits the mold"—we want someone who melts it down and builds something better. This is a role for the restless, the over-caffeinated, the ones who ask, “what’s next?” before the dust settles on “what’s now.” If you’re already scheming step 20 while everyone else is still debating step 2… good. You’ll fit right in. August 14, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $112,450.00 - $203,275.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Job Description Position Description Drake State Community and Technical College is in NEED OF A CUSTODIAN/MAINTENANCE WORKER FOR 6 MONTHS TO 10 MONTHS: Essential Job Functions: The Custodial/Maintenance Employee shall perform duties as specified in conformity with policies established by the Alabama Community College System Board of Trustees and the J.F. Drake State Community and Technical College Faculty and Staff Handbook. Hours: Our normal working hours are Monday thru Thursday 8AM - 5:30 PM and Friday 8 AM - 12:00 PM (40 hours). However, these hours need to be flexible due to special events which could occur on or off campus and we could be called on to support. We also work some weekends (including Sundays) to perform deep cleaning when there arent as many people on the campus. Preferences will be given to candidates who can demonstrate through their experiences and accomplishments: The ability to handle multiple tasks and various situations in a calm and professional manner The ability to work well under pressure and meet deadlines An understanding of and commitment to the philosophy and mission of a community and technical college A sensitivity of and commitment to cultural diversity Skills Required This job needs experienced and focused candidates who: Have a proven record of working in this type of job. Possess knowledge of the proper use of cleaning supplies. Are able to handle multiple tasks assigned. Are able to lift 50 lbs. Are able to stand, walk, lift, stoop and bend for prolonged periods. Are able to use common hand tools. Perform general housekeeping of buildings. Operate equipment/machinery such as buffers and vacuum cleaners. Keep buildings and assigned areas in a clean and orderly condition. Possess knowledge of the proper use of cleaning supplies Follow procedures and directions for the use of chemical cleaners. Clean, sanitize and disinfect restrooms to include toilets, urinals, sinks, walls, mirrors, fixtures, doors. Clean and sanitize all contact surfaces. Clean/clear blocked sink drains and toilets. Clean doors, grates, kickplates, and partitions. Mop restroom, classroom, breakroom, conference room and hallway floors. Dust and clean display bulletin boards, furniture, woodwork, fixtures, windows, window blinds and other equipment. Stock and maintain supplies in restrooms and other assigned areas. Vacuum and spot-clean carpets. Empty and clean waste receptacles and dispose of trash appropriately. Maintain outside areas including sweeping or washing sidewalks and walkways and picking up debris from the perimeter of the buildings. Perform routine maintenance on custodial equipment. Disinfecting and sanitizing bathrooms, office and classrooms as directed. Perform general maintenance functions to include: Replace incandescent and fluorescent light bulbs. Sweep, mop, strip, wax, and buff tile floors. Ensure proper care in the use of maintenance and power equipment. Spray offices/classrooms/labs with insect repellant as needed. Keep storage areas neat and orderly. Process maintenance requests as assigned Assist in moving equipment and furniture. Assist with cleaning, set-up, and facility preparation for special meetings or events, to include moving/arranging furniture and equipment. Perform other work-related responsibilities as assigned by the Maintenance Lead, Director of Operations and/or the President Experience Required 1 year experience in custodial work Experience Preferred Some general maintenance experience and the ability to use common hand tools Education Required GED or High School Additional Information Hours: Our normal working hours are Monday thru Friday 8 AM - 4:30 PM (40 hours). However, these hours need to be flexible due to special events that could occur on the campus and we would need to support. We also come in on some weekends, (including Sundays) to perform deep cleaning when there arent as many people on the campus.

Job DescriptionBenefits: • Flexible schedule Job Description: Do you want to make an extra money the during the week? Office Pride is seeking a reliable, hardworking cleaner to join our team. As a cleaner, you will be responsible for maintaining a clean and safe work environment for our clients. Responsibilities: • Clean and maintain commercial office spaces, • Perform general cleaning tasks, including sweeping, mopping, dusting, and restroom sanitation, • Adhere to company standards and proceduresQualifications:, • Ability to work independently and as part of a team, • Ability to use a floor machine: scrubber or buffer, • Strong attention to detail and organizational skills, • Physical ability to lift and carry up to 35 pounds, • Reliable transportation, • Previous cleaning experience preferred, but not requiredBenefits:, • Competitive hourly wage, • Paid training, • Opportunities for advancement, • Flexible scheduleSchedule:, • Monday-Friday 6:00pm-9:00pm, • Tuesday & Friday 5:00pm- 8:00pm, • Monday, Wednesday, Friday 6:00pm-9:00pm

Job Description Type: Full-Time Location: Huntsville, Alabama Position Description Phased n Research is seeking a highly motivated Radar Model Independent Verification and Validation (IV&V) Analyst to join our dynamic team. This group performs IV&V on radar and missile simulation products capable of modeling system algorithms as well as low-power emissions at full RF. In this role, you will: * Compile technical assessments and specifications from source materials * Develop and catalog testable IV&V requirements * Design and execute test scenarios * Sample and analyze waveform emissions * Analyze scenario output * Document test results with detailed analysis and compiled outputs The workflow requires strong collaboration with the product development team and consistent communication with the customer. Key ResponsibilitiesTechnical Expertise * Demonstrate and robust technical understanding of radar system design and functionality, including but not limited to: * Antenna design * Signal processing * Search, acquisition, and track functionalities * Electronic protection (EP) and electronic attack (EA) techniques * Air defense platforms and missile system integration Test & Evaluation Environment * Operate effectively in a dynamic and evolving test environment, requiring adaptability and rapid development of alternative solutions * Responsibilities include: • Interpreting threat system description reports to develop and organize:, • Test requirements, • Test procedures, • Test metrics, • Statistical analysis, • Designing and overseeing test scenarios that stimulate desired radar behavior., • Collecting data using a hardware-in-the-loop model with tools such as:, • Oscilloscopes, • Spectrum analyzers, • Target/jammer emulators, • Additional RF test equipment, • Designing and maintaining Python-based analysis tools to generate publication-quality test results and visualizations., • Creating detailed test reports and supporting documentation., • Collaborating closely with model developers to:, • Identify and resolve technical issues, • Coordinate testing activities, • Support test team needsTeam Collaboration Foster a collaborative environment with a shared commitment to delivering a robust end product. Customer Interaction * Provide regular status updates to government customers and program leadership * Offer iterative feedback to align expectations and team goals. * Recommend solutions to address test-related or schedule-related issues. * Seek guidance when appropriate to ensure project alignment. Required Skills & Experience * Strong investigative, problem-solving, and documentation skills with minimal supervision * Proficiency in scripting languages (Python, MATLAB, etc.) * Ability to quickly digest technical resources (flow diagrams, tables, technical specifications) * Experience in radar, missile, or similar system Test & Evaluation (T&E) or Verification & Validation (V&V) processes * Knowledge of scenario development and design of experiments (DOE) * Strong skills in data processing, statistical methods, and analysis * Ability to generate clear, well-structured technical reports and documentation (MS Office proficiency) * Adaptability to dynamic, fast-paced environments and small-team settings Desired Qualifications * Advanced coding skills in Python (preferred) or MATLAB * Ability to develop analysis solutions for complex test cases and large datasets * Strong visualization skills for presenting technical data clearly and concisely * In-depth understanding of radar algorithms (search, track, waveform selection, etc.) * Solid knowledge of electronic warfare (EW) and electronic protection (EP) concepts * Hands-on experience with RF instrumentation (oscilloscopes, spectrum analyzers, etc.) Clearance Requirement * Active Secret clearance required * Ability to obtain Top Secret/SCI Equal Opportunity Statement Phased n Research is an Equal Opportunity Employer (EOE). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Job Description Hotel : Huntsville Embassy Suites800 Monroe StreetHuntsville, AL 35801Full timeCompensation Range : 50K-55K Compensation is determined based on a variety of factors, including experience, skills, qualifications, and the specific location of the role. Actual pay may differ depending on these factors. What's in it for you? The Atrium SPIRIT is a belief in the power of Service, Perseverance, Inclusion, Respect, Innovation, and Teamwork to create an environment where everyone thrives. We go above and beyond to deliver exceptional guest experiences, work together to overcome challenges, and are passionate about positively impacting those around us. • Career Growth & Learning - 40% of our management hires are internal promotions!, • Invest in Your Future - 401(k) plan with company match., • Comprehensive Health Coverage - Medical, dental, and vision insurance options., • Paid Time Off & Vacation - Enjoy exclusive Atrium Traveler and brand discount programs to explore new destinations, • Perks That Fit Your Life - Enjoy DailyPay, wellness programs, tuition reimbursement, and exclusive discounts on your favorite brands and services. What You Will Do • Lead and inspire the Housekeeping team to deliver a best-in-class guest experience every day., • Engage with guests warmly, handle concerns swiftly, and ensure operational standards are met., • Manage department finances by scheduling efficiently, tracking payroll, and controlling supply costs., • Oversee staffing-from interviewing to coaching-and support performance management with fairness and clarity., • Experience managing housekeeping teams - You know how to motivate and lead a hardworking crew., • 3+ years in hotel housekeeping management preferred - You bring strong hospitality insights., • High school diploma or equivalent - The foundation for successful leadership., • Tech-savvy with Microsoft Office - You keep records, schedules, and reports organized and up to date., • Physically capable and flexible - Able to lift 50 lbs, be on your feet during shifts, and work varied hours including weekends and holidays., • Accountable Achiever: You take ownership and deliver results., • Agile Thinker: You adapt quickly to changing circumstances., • Talent Curator: You attract, develop, and retain top talent., • Transparent Leader: You communicate openly and honestly. Hear it from Jennifer: I feel valued and recognized through verbal acknowledgment, constructive feedback, team celebrations, personalized appreciation, opportunities for growth, peer recognition, and competitive compensation and benefits. Atrium is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status. Notice of candidate Privacy Rights:

Job Description Malone Staffing is currently hiringPart-Time Cleanersfor immediate openings at a large training and office complex located inHuntsville, AL. Location:Redstone Gateway, Huntsville, AL Shift:Monday-Friday, 1:00 PM – 5:00 PM Pay Rate:$14.50 per hour Job Duties: * Vacuuming, sweeping, and mopping floors * Dusting furniture, vents, lights, and blinds * Emptying wastebaskets and cleaning windows, restrooms, and breakrooms * Performing other general cleaning and maintenance tasks as assigned * Must be able to walk throughout a large facility for the entire shift If you or someone you know is looking for a part-time cleaning opportunity,apply today. We look forward to hearing from you! Malone Staffing is an Equal Opportunity Employer.

POSITION PURPOSE: A Project Manager (PM) is an experienced licensed engineer who can define a project, develop a set of tasks to accomplish the project, coordinate and monitor the work required, and deliver a final product on time and within prescribed budget. The PM is responsible for the quality of work performed, managing project scope, client service, client maintenance, utilization of staff, reputation of the office, contract management, billing collection and project profitability. The PM prepares project proposals for review by an Associate or Principal and may participate in presenting the proposal to the client. The PM participates in selecting the internal and external project team; determines major project design decisions in conjunction with the client and project team; assigns duties to project team, answers questions; monitors their progress; and checks accuracy of completed work. Additionally, the PM maintains a close relationship with the client throughout development of the project. They approve all changes to contract documents after completion of the design phase. They may be required to help collect fees from client and maintain client contact after the project is completed. ESSENTIAL DUTIES AND RESPONSIBILITIES: • The responsibilities of an Assistant Project Manager in addition to the following:, • Coordinate with client and project stakeholders to prepare scopes of services and fee proposals for projects for review and approval by a Principal, Associate Principal or Associate., • Provide the scheduling, budgeting, design scope, quality control and supervision of Project Engineers, Design Engineers and Engineering Technicians during the planning, design and construction of typical engineering projects., • Review the scope of services and desired deliverables for each project and develop a task list and schedule to review with the project team prior to starting work. Work with the client to obtain payment for work identified as work requests outside of contracted scope of services. Review invoices and send to Accounting. Spot check Client Status Reports for content, accuracy, grammar and spelling., • Prepare written work requests and requests for proposals for all information needed by subconsultants on each project. Work with subconsultants to determine the correct amount of information necessary to perform the specific engineering task., • Manage the schedule and flow of information among the design team and subconsultants. Review the information received from the subconsultants to determine if all needed information has been obtained and for accuracy. Check all calculations where possible., • Coordinate or direct the coordination of the research of county records and other public sources as to obtain necessary project data for design purposes. Review and approve preliminary design drawings as submitted by the Design/Project Engineer prior to allowing the beginning of detailed project design. Review and approve design development by the Design/Project Engineer prior to allowing the beginning of detailed project design. Identify potential design problems as early as possible and coordinate solutions with the design team. Review all necessary applications and check lists for project submittals. Attend and run project meetings with clients and local approving agencies. Assist in the coordination and expedition of the review and approval process with jurisdictions having approval authority over project. Maintain regular contact with clients to ensure client satisfaction., • Review the final design drawings submitted by Design/Project Engineer for completeness and accuracy prior to review by superiors and QC authority. Backcheck comments and provide final review prior to submittal. Use corporate programs and check sheets set up for quality control on each project. Respond to construction-related problems as quickly as possible. Coordinate with corporate management as needed., • Mentor and provide direct hands-on assistance when teaching new design elements, oral and writing skills to employees under supervision. Assist in review of time sheets of the employees under supervision. Review current schedule and status of the budget for each project on a weekly basis with Design/Project Engineer, using scheduling and project management tools provided by management. Prepare weekly schedule for Design Engineers and Engineering Technicians. Review weekly schedule by Project Engineers., • Provide an accurate accounting of time with descriptions for each time entry on a weekly basis. Track key performance elements of the Project Manager position and report to Supervisor. Review key performance elements for supervised employees and report to Supervisor. Be innovative and develop new ways to work smarter and improve efficiency., • Provide a steady pipeline of opportunities through business development with external community members., • Participate in various community events to bring brand awareness and business development opportunities., • Assist in the recruitment and retention of various engineering roles., • Work alongside functional departments to fulfill corporate needs., • Perform other duties assigned by a Principal or Associate., • May be required to travel periodically to project meetings and construction sites. Typically, day trips or overnight trips, however occasionally longer trips are necessary. ADDITIONAL DUTIES AND RESPONSIBILITIES: Participate in client maintenance and develop new client relationships. Participate in marketing and business development activities. MINIMUM QUALIFICATIONS: Education and Experience: • Bachelor’s Degree in Civil Engineering or related field, • Minimum 4 years’ experience; 5 years’ experience preferred, • Licensed to practice Civil Engineering, and ability to obtain licensing in additional states., • Experience and success preparing design calculations and design documents (plans and specifications) Skills and Abilities: • Ability to delegate tasks to others, • Ability to design all components of a project, • Ability to manage projects from inception to completion, • Aptitude to lead others in design of a project and ensure project completeness, • Ability to prioritize tasks and manage use of time both personally and other team members, • Ability to prepare calculations and reports that clearly express project requirements, • Proficient with civil design software including AutoCAD, Civil3D and stormwater design programs (Has the ability to verify others work within the appropriate design software), • Proficient using spreadsheets, word processing, and standard office software, • Excellent planning and organization skills required for our fast-paced environment., • Strong verbal communications and technical writing skills, • Proven ability to communicate with internal and external project team members, various stakeholders including clients, jurisdictional and utility authorities, and members of the community., • Listening and following directions, • Self-motivated and process driven, • Critical thinking, • Communicates well, • Can Do Attitude, • Ability to adapt to changes, • Proficient knowledge of engineering design principles and methods

Job Description deciBel Research has an immediate opening for a Radar Analyst in Huntsville, AL. Position Description: deciBel Research, Inc. is seeking an experienced Radar Analyst to support the Missile Defense Agency's (MDA) Missile Defense System (MDS) ground and flight test program. The Radar Analyst will analyze data from ground tests and flight tests, perform root cause analysis on anomalies, and prepare analysis products for inclusion in formal briefing packages. Data analysis will be performed as directed by the Program Manager and Lead Analyst in support of MDA's Joint Analysis Team (JAT). Additional responsibilities include daily interaction with operators, engineers, other members of the technical team, and the customer. Deployment to the operational site in support of the MDS distributed ground test and flight tests may be required. Individuals with previous experience conducting MDS ground tests utilizing Hardware in the Loop (HWIL) radar representations and/or direct experience with fielded radar systems will find this work challenging and rewarding. This position provides an excellent opportunity for employee growth and advancement. Education Requirements: Bachelor's Degree in Engineering, Computer Science or a related field. Experience Requirements: • The successful candidate will possess 5+ years of relevant technical knowledge as well as expert-level knowledge of MATLAB and a working-level knowledge of the Linux OS., • Excellent verbal and written communication skills and the ability to multi-task are required., • Prior experience with MDS radars is preferable., • Experience with integration tools and scripting languages: Shell, Ruby/JRuby, Perl, Python, MS Office. Job Posted by ApplicantPro

Job Description 100% Travel Required PERMANENT Location: 100% Travel - 6 weeks on before long weekends home Shift: Core construction hours 6:30am-3pm Overview: Our client is seeking a Construction Manager/Site Safety and Health Officer for local and travel opportunities with 10+ years of project experience working in the construction and safety industries. Applicants will be responsible for overseeing construction sites, subcontractors, and workers to ensure a high level of quality and safety. Applicants will also be responsible for interface with Project Managers, Engineers, and Customers to successfully execute multiple projects. Day to Day: • Effectively manage multiple projects with multiple employees and/or subcontractors., • Read construction prints, submittals, and other associated technical documentation and manage implementation (including quality and safety) of the provided designs., • Create and review Requests for Information, Requests for Proposal and Change Orders., • Ensure that all work is performed in accordance with specifications, approved manuals, and procedures., • Ensure that the project is constructed and documented in accordance with the contract documents and good engineering practices., • Perform change order estimating and assist the Project Manager in change order negotiations., • Coordinate and monitor schedule updates, invoices, and submittals., • Assist in managing and reviewing the progress of construction schedules., • Review weekly and monthly reports on the status and progress of the contracts, including project costs and potential changes., • Conduct client program meetings as needed., • Monitor employee and subcontractor compliance with the applicable safety and health requirements., • Conduct safety inspections/audits to ensure implementation of safety, health and environmental procedures and policies for the benefit of employees and clients., • Maintain project safety, health, and environmental records., • Research and implement new site safety practices., • Analyze accident reports and evaluate injury case studies based on available facts., • Prepare and conduct safety training sessions for employees and subcontractors., • 10+ years of construction & safety supervisory experience, • Knowledge of construction technology, • Familiarity with project and department budget process and tools, • Knowledge of project controls, • Risk assessment/Management, • Communication, meeting, and presentation skills, • Comfort with time reporting systems, • Construction Quality Management for Contractors preferred, • EM 385-1-1 Awareness Training preferred, • First Aid/CPR Certified, • Plumbing, HVAC, or Electrical License a plus, • Prefer applicants have a background in HVAC, HVAC controls, Plumbing, or Electrical design-build construction projects., • Experience on Government installations/projects is preferred, but not required., • Familiarity with MS Office Schedule software and Primavera preferredCompany DescriptionAt Insight Global, we’re more than just a staffing agency — we’re a people-first solutions firm that believes in the power of connection. With a nationwide presence and a reputation built on trust, integrity, and results, we specialize in placing top-tier talent across healthcare, IT, education, engineering, and professional services.At Insight Global, we’re more than just a staffing agency — we’re a people-first solutions firm that believes in the power of connection. With a nationwide presence and a reputation built on trust, integrity, and results, we specialize in placing top-tier talent across healthcare, IT, education, engineering, and professional services.

HUNTSVILLE, AL, BIRMINGHAM, AL (POSSIBLY CONSIDER MONTGOMERY OR THE AUBURN/OPELIKA AREA), OR NASHVILLE, MURFREESBORO, OR CHATTANOOGA, TN Neel-Schaffer is not just a place to work, it is a promise of a living, dynamic environment where people collaborate, innovate, build enduring relationships, excel, and grow professionally in a strong culture of ownership. Do you have the desire to learn and the drive to excel and thrive in an engaged, client focused environment? If so, Neel-Schaffer might have just the opportunity you are seeking. Neel-Schaffer has an opening for a Senior Project Manager – Water/Wastewater to join our growing engineering firm. This position has multiple options in Alabama and Tennessee for your home base. In Alabama, the options are our Huntsville Office or our Birmingham (AL) Office. We are also open to the candidate being located within the Montgomery or Auburn/Opelika areas, with an understanding that travel to Birmingham, Huntsville and other markets will be required. In Tennessee, we have offices in Nashville, Murfreesboro, and Chattanooga. The successful candidate will be highly motivated, seeking career growth, and have solid communication and problem-solving skills in a collaborative team environment. The ideal candidate will have experience in water modeling and treatment, along with wastewater treatment. Additionally, the Senior Project Manager – Water/Wastewater will have experience with water main, gravity sewer system, booster station, and sewer lift station design. Neel-Schaffer is an Engineering News-Record Top 200 engineering design, planning and construction management firm. We are employee owned and offer a competitive salary and excellent benefits that include health insurance and a matching 401(k) savings plan. Minimum Requirements • Bachelor of Science in Civil or Environmental Engineering., • Licensed Professional Engineer in Alabama or Tennessee or the ability to obtain within 6 to 12 months, preferred., • 10 years of experience with technical work and project management in the field of Water/Wastewater or Environmental Engineering., • Critical thinking and problem-solving skills, with the ability to plan and conceptualize., • The ability to produce technical reports and memorandums that are clear, concise, and accurate., • The ability to communicate effectively during day-to-day interactions with teaming partners, colleagues, and clients., • Experience with hydraulic computer models such as EPANET, Bentley WaterCAD or Autodesk InfoWater, preferred., • Working knowledge of Microsoft Office Suite. Equal Opportunity Employer