Parts jobs in Orlando, Florida - Page 4Create job alerts

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Sr. Inside Sales Representative Are you seeking an entrepreneurial, empowering workplace that allows you to: • Develop a career track, • Leverage your current skills while developing new skills, • Work with an incredible team of people Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Sr. Inside Sales Representative. The Sr. Equipment Rental Specialist is an experienced inside sales role responsible supporting telephone and walk-in customers with rentalsof all types of construction/industrial equipment. This position is considered the Company's front line of contact with the customer, whose purpose is to understand customer equipment needs, negotiate and place orders. The role also requires strong administrative skills and an ability to deliver customer satisfaction through a professional attitude at all times. Ancillary roles may include supporting the logistic of dispatch equipment delivery and training other team members. Education or experience that prepares you for success: • High School diploma or GED required, • Valid Driver's license required, • At least 3 years of equipment rental industry experience or 4 year degree + 1 year equipment rental industry preferred Knowledge/Skills/Abilities you may rely on: • Strong customer service & telephone skills, • Solid computer and administrative skills, • Successful completion of the DOT Qualification process preferred, • Bilingual (Spanish or other) may be preferred in some locations The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Related experience may include: Account Manager, Rental Sales, Parts Sales, Service Manager, Customer Service Representative, Construction Manager, Tools Manager, Counter Sales Representative, Equipment Associate, Manager Trainee, Manager in Training, Skilled Craftsman, Brand Ambassador Base Pay Range: $21.38 - 25.38 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: * Health, Dental and Vision plans * 401(k) Match * Volunteer time off * Short-term and long-term disability * Accident, Life and Travel insurance, as well as flexible spending * Tuition Reimbursement Options * Employee Assistance Program (EAP) * Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): * 12-25 vacation days depending on years of service * 5 sick days * 6 holidays * 2 half day holidays * 2 floating holidays * 1 inclusion day * 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

UDR is hiring a Service Manager to join our team at Arbors at Maitland Summit (663 units) located in Orlando, FL. GENERAL SUMMARY OF DUTIES: Oversee the efforts of property in the areas of inspection, maintenance, and repair. This position's time is involved in leading, managing and completing routine, daily tasks and projects. This position is responsible for ensuring the physical aspects of each community meet the company's established standards and any applicable laws. This is done for safety, appearance, and operational efficiency reasons and must fall within the budgeted financial goals. Facilitate the diagnosis of problems and repair in areas such as HVAC, electrical, plumbing, pool, carpentry, dry walling, exterior structural, and appliance. Additionally, the Service Manager is responsible to schedule the quick turnaround of vacated apartments for occupancy. SUPERVISION RECEIVED: Reports directly to the Sr. Service Manager or District Service Manager. SUPERVISION EXERCISED: May supervise up to (1) Service Apprentice, Service Technician, and/or Painter. ESSENTIAL FUNCTIONS: 1. Manage and complete all resident service and maintenance requests as required. Manage service requests and completion of such including completing work orders as assigned and as necessary., 2. Meet the service budget and manage the financial resources necessary to accommodate current and future maintenance and repair projects working within approved budget guidelines., 3. Provide leadership with the service team as needed or directed by the District Service Manager including interviewing, orientation, training and provide feedback to the District Service Manager on their performance., 4. Lead, direct, and supervise the service team in their day-to-day functions if applicable., 5. Review and approve Kronos timekeeping records for the direct reports at the community., 6. Manage and schedule the service support necessary to maintain the overall appearance, preventative maintenance, safety and OSHA/legal requirements to ensure the safety of residents and mitigate liability for the company., 7. Manage execution of emergency repairs from within service team or from third-party service vendor., 8. Conduct periodic inspections to assess effectiveness of policies and procedures and develop corrective action plans as needed., 9. Develop standards for the cleanliness and overall appearance of the community's grounds, amenities, building exteriors, market ready unit interiors, breezeways, curbs, signage, leasing office, central garbage areas, parking lots, and other buildings and common areas to ensure that they reflect and represent the high quality of the community., 10. Manage, maintain, and report any amenity deficiencies to the Resident Services Manager and/or Community Director, whoever is designated as the property lead person., 11. Manage vacant apartment turn schedules., 12. Punch walks on all make-ready units as well as manage quality assurance of all vendor turns., 13. Utility management for vacant apartments to ensure energy efficiency., 14. Perform final walk for move-ins ensuring quality represents the company's standard., 15. Perform pre and post move out inspections, documenting and taking/attaching photos of unit condition., 16. Provide determination for interior vacant condition for items to be replaced, such as carpet., 17. Manage ROI installations to include administrative prep, vendor coordination, etc., 18. Conduct weekly lighting inspections throughout the community, noting and resolving any issues per operational policy., 19. Complete and or manage all community common area and resident service requests., 20. Manage and oversee pest control for all units holding third-party vendor accountable., 21. Provide inspections to all fitness equipment to ensure safe operation., 22. Refrigerant (freon) usage and recovery log in compliance with Risk Management guidelines., 23. Manage pool logs for vendor compliance., 24. Complete Cap Labor forms., 25. Purchase supplies and equipment to maintain appropriate levels of inventory working within the budget guideline and through Ops Technology., 26. Monitor batteries for smart locks and proactively replace as necessary., 27. Serve as point person for questions on programming of controlled access areas within the community., 28. Manage equipment warranties and required follow-up., 29. Provide superior customer service to internal and external customers., 30. On call rotation as required and needed., 31. Hire and train new staff and develop staff to maximize potential as needed based on supervisory status., 32. Monitor staff performance to include performance and address performance problems through corrective action and dismissal. Assist direct reporting staff to address and resolve concerns or complaints involving job duties and job descriptions, performance standards, relations with coworkers, relations with supervisors and managers as needed based on supervisory status., 33. Approve time records and requests for time off as needed based on supervisory status., 34. Ensure leadership style creates a productive, motivated, informed, inspired, engaged and goal-oriented team., 35. Comply with all Company policies and procedures related to employment., 36. Commit to Living the UDR Values each day in every action taken when executing the essential functions of the job., 37. Perform other duties as assigned or as necessary. PERFORMANCE REQUIREMENTS: Knowledge of organizational and community policies and procedures. Ability to apply policies and procedures to solve everyday issues. Knowledge of an ability to follow proper safety techniques in accordance with OSHA, HVAC, Company, and community policies, procedures and standards to mitigate liability. Must know and follow the Fair Housing laws. Ability to proactively recognize and implement superior customer service to internal and external customers. Must know and follow the Fair Housing laws. Ability to examine and repair various types of service equipment. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to exercise initiative, problem-solving and decision-making skills. Ability to work in a fast-paced environment and handle multiple projects simultaneously to meet deadlines. Ability and willingness to lead, take charge, and offer opinions and direction. Immediately repairs or delegates repair of all mechanical or electrical equipment malfunctions, associate/resident/visitor injuries or accidents, or other safety issues to the appropriate individual(s) and recommends/initiates appropriate corrective actions. Ability to motivate, develop, and direct people as they work, identifying the best people for the job. Ability to apply the principles and practices of work leadership and management. Ability to motivate the community team and manage their performance in accordance with company policies, values, and business practices. Ability to effectively present information and respond to questions or resolve resident, vendor and contractor issues. Ability to work in conjunction with community management and associates. Must have effective verbal and listening communication skills. The ability to communicate information so others will understand. Skilled in the use of the internet, spreadsheets, databases, and word processing software. Ability to create, compose, and edit written materials. Ability to use a computer, a smart phone, and enter service ticket information into the service ticket system. TYPICAL PHYSICAL DEMANDS: Some bending, stooping and stretching. Must be able to push, pull, lift, carry or maneuver weights up to one hundred (100) pounds independently and two hundred and fifty (250) pounds with assistance. Requires eye-hand coordination and manual dexterity sufficient to operate tools and equipment. Sensory capability to detect odors and hear sounds necessary to detect, diagnose, and repair machinery. Requires normal range of eyesight. Ability to physically access exterior and interior parts of the community and amenities and be able to climb ladders and access small crawlspaces. Regular and consistent attendance on the job is an essential function. TYPICAL WORKING CONDITIONS: Frequent exposure to outside elements where temperature, weather, odors, and/or landscape may be unpleasant and/or hazardous. Flexible schedules with occasional evening and regular weekend work. May be on rotation for "On Call". EDUCATION AND EXPERIENCE: 1. High School Diploma or its equivalent preferred., 2. Technical or vocational certificate and/or degree preferred., 3. Minimum of four years' experience in building and mechanical maintenance including HVAC, plumbing, electrical, appliance repair, painting and drywall, and/or pool maintenance., 4. Must be EPA Type II certified: Type III or Universal may be required at some locations., 5. Experience supervising associates is preferred., 6. Certification in Chlorine, Fluorine, and Carbon (CFC) required for diagnosing, repairing, and maintaining equipment required for some properties and preferred for all properties., 7. Some locations require certification in pool operation (CPO)., 8. Must have and maintain a valid driver's license unless otherwise noted. • The Company retains the discretion to add to or change duties of position at any time. UDR is proud to provide equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. UDR is committed to providing and maintaining a diverse workforce and an inclusive work environment with equitable access and opportunity for associates to participate, grow, and reach their full potential. #ZR Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Inside Sales Representative Are you seeking an entrepreneurial, empowering workplace that allows you to: • Develop skills for career growth through an outside sales or operational management career track, • Use your inside sales or customer service skills for steady hours & potential overtime, • Work with an incredible team of people to make it happen for customers Sunbelt Rentals--the fastest growing rental business in North America--is seeking a Inside Sales Representative. The Equipment Rental Specialist is an inside sales role responsible supporting telephone and walk-in customers with rentalsof all types of construction/industrial equipment. This position is considered the Company's front line of contact with the customer, whose purpose is to understand customer equipment needs, negotiate and place orders. The role also requires strong administrative skills and an ability to deliver customer satisfaction through a professional attitude at all times. Education or experience that prepares you for success: • High School diploma or GED required, • Valid Driver's license required, • Familiarity with various types of construction/industrial tools & equipment Knowledge/Skills/Abilities you may rely on: • Previous equipment rental industry experience, • Strong customer service & telephone skills, • Solid computer and administrative skills, • Successful completion of the DOT Qualification process preferred, • Bilingual (Spanish or other) may be preferred in some locations The physical demands of this role require bending, squatting, crouching, reaching, lifting 50 pounds or more, and working indoors/outdoors when required by the job. The above description is not a complete listing of all miscellaneous, incidental or similar duties which may be required from day to day. Reasonable accommodations may be made to comply with applicable laws. Sunbelt Rentals is an Equal Opportunity Employer - Minority/Female/Disabled/Veteran and any other protected class. Related experience may include: Account Manager, Rental Sales, Parts Sales, Service Manager, Customer Service Representative, Construction Manager, Tools Manager, Counter Sales Representative, Equipment Associate, Manager Trainee, Manager in Training, Skilled Craftsman, Brand Ambassador Base Pay Range: $21.38 - 25.38 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: * Health, Dental and Vision plans * 401(k) Match * Volunteer time off * Short-term and long-term disability * Accident, Life and Travel insurance, as well as flexible spending * Tuition Reimbursement Options * Employee Assistance Program (EAP) * Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): * 12-25 vacation days depending on years of service * 5 sick days * 6 holidays * 2 half day holidays * 2 floating holidays * 1 inclusion day * 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

Job DescriptionDescription: To assemble finished product using sub-assemblies, parts, and fasteners according to customer specification and company policies. Essential Job Functions: • Perform bench-type processes to complete mechanical and electrical assemblies and sub-assemblies, using hand tools, and electronic and pneumatic tooling, • Set and assemble small, large hand tools, pneumatic and hydraulic tools, • Report defective materials or questionable conditions to the department supervisor, • Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations, • Complete tasks as directed by manufacturing schedules with direct supervision, • On-site attendance is required, • Ability to follow established processes and procedures, • Must be able to concentrate and sit for long periods of time, • High School Diploma or GED required, • Minimum of 1 year experience in Assembly or Manufacturing environment required, • Ability to interpret blueprints preferred Management reserves the right to assign or reassign duties and responsibilities to this job at any time. EOE, including disability/vets

Job Description Position Purpose and Objectives Under direction of Supervisor and/or Department Manager, performs line set-ups, changeovers, and makes mechanical, electric repair of liquid, topical, powder filling and packaging equipment. Performs assigned preventive maintenance work orders and fills out documentation to ensure work performed, dates, time and parts used are recorded in the CMMS. Essential Job Functions • Follows all company and OSHA safety rules and regulations to repairs and maintains, in accordance with diagrams, sketches, operation manuals, and manufacturer's specifications, machinery and mechanical equipment, such as conveyor systems, and production machines and equipment, using hand tools, power tools, and precision-measuring and testing instruments., • Visually observes mechanical devices in operation and listens to their sounds to locate causes of trouble., • Examines form and texture of parts to detect imperfections., • Inspects used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, and other measuring instruments., • Adjusts functional parts of production machinery., • Repairs or replaces defective parts, using hand tools and power tools., • Installs special functional and structural parts in devices, using hand tools., • Start devices to test their performance., • Lubricates and cleans parts., • May set up and operate drill press, grinder, and other metalworking tools to make and repair parts., • May repair electrical equipment., • Troubleshoot equipment problems and perform immediate repairs and preventative maintenance on equipment., • Overhaul and install new equipment., • Rebuild and fabricate parts., • Perform facility maintenance and maintain clean and safe work area., • Generate parts request to ensure adequate inventory., • Complete work orders as assigned., • Perform equipment changeovers and production line set-ups. Knowledge, Skills, and Abilities Required • Ability to speak, read, and writes English., • Ability to do basic math., • Has working knowledge of liquid filling/capping/labeling equipment., • Ability to stand for long periods of time., • Has fundamental understanding of mechanical and electrical systems., • Can use a multi-meter to test for resistance and various voltages., • Can diagnose and repair pneumatic system components., • Can diagnose and repair hydraulic system components., • Can use hand tools to perform repairs to machinery., • Can use basic power tools and shop equipment such as drill press, and band saw. Supervisory Responsibility • None. Working Conditions • Interacts with Supervisor of Mechanics for daily assignments, provides support as required by line leaders, quality control, and production supervisors and other management. Inside and outside of air conditioned areas., • Requires lifting up to 50 lbs, standing, bending, climbing ladders, working in man lifts and fork lift cage. Minimum Qualifications • Minimum 3 years experience in a high-speed packaging environment., • Can apply technical knowledge in real world applications., • Good communication skills., • Can work with minimal supervision both individually and in a team environment., • Able to work additional hours on short notice to accomplish company production goals when needed. Success Factors • Self-Motivated, works well under stressful conditions, works well with diverse teams. Displays a positive attitude and a strong desire to learn., • First and Second shift flexibility. Benefits • Retirement plan 401(k) - 401(k) matching, • Dental, Vision, Health, Short/long term disability and Life insurance available., • Paid time off, • Holiday

Job Description Overview Avanath is proud to be named one of the top property management companies to provide affordable housing for the workforce. Cultivating the American Dream is the purpose that binds the Avanath team. At Avanath, every day is an opportunity to make a difference in someone's life. Whether it is helping residents call one of our communities' home, providing excellence in customer service, or championing our workforce, we are committed to creating an unforgettable experience as a great place to live, work, and be. The Role: As a Maintenance Technician, you will create an environment where people will want to live. You will maintain the property to ensure good working order and pleasant curb appeal while providing excellent customer service to your residents. The incumbent in this role must possess a high degree of professionalism and positive engagement for our residents and the workforce. • An Aptitude for Connecting - Must possess a strong sense for creating a sense of community, as well as the drive to go the extra mile to create a positive experience for all residents and staff. Your success and purpose are driven by the relationships that you build within your communities, including vendor partners, and regulatory and social services partnerships. This includes adopting a collaborative approach to create consistently favorable circumstances that foster success and effectiveness for the Organization and the communities., • An Authentic Attitude - Consistently demonstrate an open and professional attitude and approach when accessing and resolving resident and staff concerns. This includes but is not limited to seeking resources throughout the organization via the organization's support services and senior leadership., • 2 years of multifamily maintenance experience is highly desired., • Hands-on maintenance skills, including plumbing, electrical, general carpentry, HVAC, appliances, pools, etc., • EPA Type II or Universal certification is highly desired; CPO is a plus., • Availability to be on-call to address any emergencies., • Reliable Transportation., • A positive attitude and the desire to learn and develop your skills., • Superior customer service and verbal communication skills., • Able to work both independently and as a member of a team. • Customer Service and Maintenance • Provides exceptional customer service with every Interaction and delivers high-quality maintenance service., • Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements., • Completes the "make-ready" process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a "punch" list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed., • Supports cost-cutting and expense control programs by fixing rather than replacing parts, when possible, not being wasteful with materials and supplies, and practicing the correct use of tools and equipment. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management., • Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property's maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs. • Adherence to Property Management Rules, Regulations, and Guidelines • Practices proper safety techniques in accordance with Company, property, and departmental policies, procedures, and standards by immediately reporting any mechanical or electrical equipment malfunctions, employee/visitor/resident injuries or accidents, or other safety issues to the appropriate individual(s)., • Complies with Avanath's safety and risk-management policies by attending and participating in the property's routine safety meetings, completing required training on OSHA and other safety-related laws and requirements, and reporting accidents and incidents promptly and accurately., • Follows established policies and procedures by monitoring and ensuring compliance with regulatory requirements, organizational standards, and operational processes related to area(s) of responsibility and reporting violations or infractions to appropriate individual(s)., • Conduct all business in accordance with company policies and procedures, Fair Housing, Americans with Disabilities Act, and all other laws pertaining to the apartment industry. • Physical Demands & Working Conditions • The incumbent in this position is classified as essential staff and is expected to report to work and adhere to all safety and business protocols., • May be required to report to work during inclement weather conditions., • Frequent standing and walking., • Reading, comprehending, writing, performing calculations, and communicating verbally., • May work in an elevated site, may walk on uneven ground., • Occasional squatting, bending neck/waist, twisting neck/waist, pushing, and pulling. We know that our teams are the heart of our success and growth, and we are committed to showing our appreciation. We offer: • Culture Built on Purpose and Core Values - A Commitment to Integrity, A Spirit of Caring, and A Focus on Continuous Improvement., • Comprehensive Benefits – health, dental & vision, 401(k), personal time off, paid holidays and more!, • Growth that is based on achievement and an emphasis on promoting from within our ranks versus just external candidates. Avanath Capital is committed to fostering, cultivating, and preserving a culture of diversity, equity, and inclusion. Our human capital is the most valuable asset we have, and Diversity, equity, and inclusion ("DEI") are at the very core of Avanath's operating and investment philosophy. We believe that bringing together people with diverse thoughts, backgrounds, talents, and experiences at all levels of our organization, including the executive team, enables us to proactively and creatively achieve our mission to enable opportunities for hard-working American families. The collective sum of the individual differences, life experiences, knowledge, inventiveness, innovation, self-expression, unique capabilities, and talent that our employees invest in their work represents a significant part of our culture, our reputation, and our achievements. We embrace and encourage our employees' differences in age, color, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. Our organization's diversity initiatives include—but are not limited to—our practices and policies on recruitment and selection; compensation and benefits; professional development and training; promotions; transfers; and the ongoing development of a work environment built on the premise of gender and diversity equity that encourages and enforces: • Respectful communication and cooperation between all employees., • Teamwork and employee participation, permitting the representation of all groups and employee perspectives., • Work/life balance through flexible work schedules to accommodate employees' varying needs., • Employer and employee contributions to the communities we serve to promote a greater understanding and respect for diversity. #EST Compensation Range Compensation Range$24—$24 USD

Job Description The HVAC Technician will be responsible for repairing, maintaining, and installing residential and commercial HVAC systems. Working as part of a small team, the technician will utilize standard hand and power tools along with mobile apps and diagnostic software to ensure effective system performance. This role involves regional travel and emphasizes safety compliance, customer service, and accurate documentation. Advancement opportunities include technical specialization as well as roles in sales or consulting. Responsibilities • Repair, troubleshoot, and install residential and commercial HVAC systems, • Conduct system testing and ensure compliance with safety standards, • Provide excellent customer service and clear communication, • Maintain accurate documentation and reports using mobile applications, • Manage parts and tool inventory efficiently, • Operate hand and power tools safely and effectively, • Collaborate with small team members and support regional travel requirements Required Qualifications • Minimum 2 years of experience in HVAC technology Preferred Qualifications • Technical certification in HVAC technology, • EPA 608 Certification, • Knowledge of HVAC systems, electrical wiring, and blueprint reading, • Strong problem-solving and time management skills, • Effective customer communication and safety procedures expertise, • Mechanical aptitude and proficiency with tool operationCompany DescriptionEnglish Air Inc. started in business in 2005. Our founder, Anton Martin, moved from London to Palm Bay in 1993 where he completed his HVAC training. He worked for Trane as a service tech for a number of years. After seeing the lack of expertise in the industry (as well as hearing some terrible stories about poor customer service), he saw an opportunity to serve Orlando, FL, and the surrounding areas with polite, professional experts who truly enjoy giving their customers 5-star AC service—every time.English Air Inc. started in business in 2005. Our founder, Anton Martin, moved from London to Palm Bay in 1993 where he completed his HVAC training. He worked for Trane as a service tech for a number of years. After seeing the lack of expertise in the industry (as well as hearing some terrible stories about poor customer service), he saw an opportunity to serve Orlando, FL, and the surrounding areas with polite, professional experts who truly enjoy giving their customers 5-star AC service—every time.

Job DescriptionDescription: American Road Group is seeking a Bilingual Warehouse Associate & Delivery Driver at Orlando Harley-Davidson in Orlando, FL! Responsible for Warehouse tasks as it relates to store replenishment, shipment receiving, handling, assist in management of inventory of merchandise and supplies in a timely and organized manner including general Distribution Center duties. Major Duties and Responsibilities • Store Replenishment, • Shipment Processing, • Inventory Maintenance, • General DC Tasks, • All other duties as assignedRequirements:, • Bilingual a plus!, • Knowledge of replenishment, shipping, receiving, inventory control, and stock handling procedures, • Ability to read, write legibly, and compute simple arithmetic functions accurately, • Turn in all receipts, logs, etc… timely to appropriate individuals to maintain accurate record keeping and timely payment, • Meets with Productivity standards set by Company including the ability of manage multiple projects on time with accuracy, • Computer experience with current company system, • Ability to establish and maintain effective working relationships within DC Team and other business partners including but not limited to the Stores, Buy Team, and Accounting/Finance Department, • Time management and organizational skills, • Experience with Point-of-Sale systems or the ability to quickly learn., • Frequently required to bend, stoop, crouch, reach, sit, stand, push and pull and lift up to 75 lbs., • The noise level in the work environment is usually loud., • Frequently works near moving mechanical parts., • Potential exposure to battery acid, gasoline, chemical cleaning materials or other materials in shop.

Job Description Location: King Khalid Military City, Saudi Arabia ECS is seeking experienced Maintenance Technicians to work in Saudi Arabia providing maintenance and sustainment operations for the Apache 64 Echo Longbow Crew Trainer (LCT) simulators. Responsibilities • Provide maintenance and sustainment operations for the Apache 64 Echo Longbow Crew Trainer (LCT) simulators., • Provide on-site maintenance and supply repair/replacement of parts for the AH-64EV2 LCT., • Shall Implement a Failure Reporting, Analysis, and Corrective Action System (FRACAS) for Supported TADSS, • Perform scheduled, preventive, and corrective maintenance of TADSS and Foreign Government Furnished Property (GFP) in accordance with and in order of precedence, the applicable Technical Manuals (TMs) for each TADSS, Government-provided preventive maintenance checklists, or best commercial practices if a checklist is not provided., • Maintain TADSS and Foreign GFP in Fully Mission Capable condition to meet the Contract Mission Time and CPF requirements in Appendix B for each device and location., • On-site maintenance performed In Accordance With (IAW) technical data; if technical data/checklist in not provided for any single item, maintenance IAW the best commercial standards., • Maintain all the documentation (Operator & Maintainer Manual, I/O Manual, Commercial Off- The-Shelf Manual, Technical Data Package Schematics and Cold Start Procedures) spares and tools., • On-site maintenance coordinated with the local installations designated Foreign Government representative to deconflict training, exercise, and test schedules with maintenance activities, and resolve problems on the devices or at the site., • On-site to repair the system in accordance with the document scheduled maintenance (Preventative Maintenance)., • Review/report facility issues that cause Non-Fair Wear and Tear (NFWT) to simulator devices., • Work Orders are logged into the Information System Tool Suite (ISTS) with all maintenance information, including Foreign GFP parts/spares obtained from RSLFAC., • Data logged into the ISTS is accurate and complete. Qualifications: • Experience with the Longbow Crew Trainer (LCT) simulator or BAT, Black Hawk Aircrew Trainer, • Experience with the Apache 64 Echo or Black Hawk UH-60M Helicopter, • Prior military experience, • TADSS maintenance instruction training and troubleshooting experience based on the TADSS maintenance manuals, products/materials/packages, for the TADSS maintenance services., • TADSS operator services experience for aviation flight simulators and aviation TADSS, • Good writing, interpersonal communication and problem-solving skills are required., • Ability to communicate effectively with internal management and customer management., • Ability to plan and manage schedules. Life support provided to include: local healthcare plan, visa, housing, and transportation

Job DescriptionDescription: To assemble finished product using sub-assemblies, parts, and fasteners according to customer specification and company policies. Essential Job Functions: • Perform bench-type processes to complete mechanical and electrical assemblies and sub-assemblies, using hand tools, and electronic and pneumatic tooling, • Set and assemble small, large hand tools, pneumatic and hydraulic tools, • Report defective materials or questionable conditions to the department supervisor, • Maintain the work area and equipment in a clean and orderly condition and follow prescribed safety regulations, • Complete tasks as directed by manufacturing schedules with direct supervision, • Ability to concentrate and sit for long periods of time, • Ability to follow established processes and procedures, • High School Diploma or GED required, • Minimum of 1 year experience in Assembly or Manufacturing environment, • Ability to interpret blueprints preferred Management reserves the right to assign or reassign duties and responsibilities to this job at any time. EOE, including disability/vets

Job Description Maintenance Technician Why join the Elevation Property Management? We envision a world where anyone, anywhere, can transform their lives by accessing safe, clean, and affordable multifamily and senior housing. Our culture is defined by our mission and guided by our sustainable values. Our people shape the uniqueness of our culture, so we look to invest in top talent in effort to sustain our high performing culture to continue elevating people, properties, and communities. If you are a looking to transform the lives of people and communities, we want you to join our team. Position Summary: Elevation Property Management’s Maintenance Technician will serve with discipline and lead with kindness. The Maintenance Technician will perform technical and mechanical work that ensures the inside and external buildings, grounds, amenities, and common areas of the property meet the Company's standards for cleanliness, appearance, safety, and overall functionality by performing maintenance-related tasks. The ideal teammate will have the ability to be flexible, proactively communicate, have a natural curiosity to learn, exhibit a high degree of professionalism, and work well both in a team environment and independently. Job Responsibilities: • Completes assigned work orders generated from resident requests for service, as well as routine upkeep on the property by diagnosing the source or cause of the defect or problem, and making repairs in accordance with established policies, procedures, safety standards, and code requirements., • Completes the "make-ready" process to prepare vacant apartments for leasing and new move-ins by completing the pre-move-out inspection, creating a "punch" list of maintenance work needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property's maintenance shop by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs., • Completes documentation and other paperwork in a timely, accurate, and complete fashion so that service requests can be appropriately documented and tracked., • Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways, and pool areas, performing general cleaning, and painting curbs and signage as needed., • Supports cost-cutting and expense control programs by fixing rather than replacing parts, when possible, not being wasteful with materials and supplies, and practicing the correct use for tools and equipment., • Complies with the Company’s safety and risk-management policies by attending and participating in the property's routine safety meetings, completing required training on OSHA and other safety related laws and requirements, and by reporting accidents and incidents promptly and accurately., • Demonstrates customer service skills by treating residents and others with respect, answering resident questions, responding sensitively to complaints about maintenance services, and completing assigned work orders with efficiency and urgency., • Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to the owner/client and management., • Minimum of 2 years previous experience, • Multi-Family, Senior living, and/or High-rise tower experience a plus, • EPA certification preferred, • Knowledge and experience repairing electrical, plumbing, carpentry, drywall, and appliances, • Self-motivation and attention to detail, • Strong interpersonal skills with the ability to build relationships, • Demonstrated track record of the highest degree of ethics and integrity, • Availability to work evenings and weekends as needed, • High school diploma or equivalent and maintain reliable transportation, • Team members need to be able to bend, stoop, climb ladders, reach, carry objects, and crawl in confined areas., • Team members must be able to work inside and outside in all weather conditions, • Team members must be able to push, pull, lift, carry, or maneuver weights of up to twenty-five (25) pounds independently and fifty (50) pounds with assistance. Rare or regular travel may be required for the accomplishment of some or all the daily responsibilities of this position. Elevation Property Management is committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates. Elevation Property Management is an equal opportunity employer and, as such, openly support and fully commit to recruitment, selection, placement, promotion, and compensation of individuals without regard to race, color, religion, age, sex (including pregnancy, gender identity, and sexual orientation), genetic information, national origin, disability status, protected veteran status or any other characteristic protected by federal, state, or local laws. We believe that diversity and inclusion among our teammates are critical to our success. Company Benefits · 11 Paid Holidays · 15 Personal Days · National Healthcare, Dental, and Vision plans · Company Provided Life Insurance plan, Short Term and Long Term Disability · 401(k) plan

Job DescriptionDescription: Celebrating 100 years of excellence in the marine industry, Nautique Boat Company is a subsidiary of Correct Craft. It has been on the waters of the world with a passion for innovation since 1925. Nautique is known to push the envelope of possibility on the water, and our owners have come to expect nothing but the absolute best. The world’s best ski boat, the world’s best wake boat, and a company that cares. Through our Nautique Cares initiatives, we are dedicated to not only making a difference on the water but to people in need around the world. Be a part of an innovative, world-class leader in the marine industry, working with a company with brand name recognition and a reputation for quality and success. Nautique values people, performance, and philanthropy and are passionate about making a difference in the world. To learn more, visit . Summary: Performs mid to expert level mechanical, electrical, and systems troubleshooting, repair, and preventive maintenance on equipment to manufacturer's manuals, diagrams, sketches etc. Duties and Responsibilities: • Performs mid-to-expert level break-fix & preventative maintenance., • Understanding of FRP [Fiber Reinforced Plastics] processes and equipment., • Identifies and sources parts, supplies and repair items as necessary., • Independently performs maintenance as per industry standards., • Provides support and back up for other members of the department as needed by leadership., • Assures compliance with 5S and housekeeping standards. Must Keep work area clean and orderly., • Completes on the job training for career development., • Updates records in the web-based maintenance request form Smartsheet system., • Drives and participates in continuous improvement activities - processes, results and cost savings., • Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions., • Utilizes predictive maintenance technologies to collect equipment performance data., • Aids lower-level technicians and provides leadership to small teams., • Performs more advanced functions as a part of training and development. Skills and Abilities for success in this position: • Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs., • Familiarity with fiber reinforced plastics, • Ability to use basic hand tools and specialized tools as appropriate, • Ability to give full attention to what other people are saying, take time to understand the points being made, and ask questions as appropriately., • Ability to manage one’s own time and respect the time of others., • Ability to work effectively as an individual or with a team., • Ability to perform tasks under time pressure deadlines., • Must have strong attention to detail., • Ability to understand and communicate information and ideas with and from others., • The ability to recognize when something has gone wrong or is likely to go wrong. Requirements: Knowledge, Education and Experience Required: • High School Degree or equivalent (GED)., • Associates degree with a technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry., • Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature., • Must be able to bend at the waist and knees and stand for extended periods., • You must wear proper safety equipment as required by company policies., • Must be able to lift 40 pounds when necessary., • The ability to see details at close range., • Must have and maintain a current driver’s license., • Must be a licensed driver with a good driving record (subject to MVR) Employment Statement Nautique Boat Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law. All your information will be kept confidential according to the Equal Employment Opportunity Commission (EEOC) guidelines. Qualified candidates will be asked to submit to background screening and drug testing.

Job Description Lula is looking for a 1099 Hvac Repair Pro to help with property maintenance of several thousand rental properties across the Orlando area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Please email with any questions

Job Description Job description About the Company: We’re a reputable HVAC provider proudly serving customers throughout the Tampa Bay region. Our focus is on delivering top-notch heating, cooling, and ventilation solutions with professionalism, integrity, and a strong commitment to customer satisfaction. As business continues to grow, we’re excited to welcome additional HVAC Technicians to our team. Position Overview: We’re currently hiring an experienced and reliable HVAC Technician to handle installation, maintenance, and repair of heating and cooling systems for both residential and commercial clients. The right candidate will be detail-focused, safety-minded, and dedicated to providing outstanding service. Key Duties: • Install, troubleshoot, and repair HVAC equipment including air conditioning units, furnaces, ventilation systems, and heat pumps., • Identify and resolve both mechanical and electrical problems in HVAC systems., • Perform regular system maintenance and preventative service checks., • Clearly communicate with customers, explaining the scope of work and offering professional recommendations when needed., • Ensure all work meets applicable safety codes and industry standards., • High school diploma or GED required; vocational or technical HVAC training preferred, • Minimum of 2 years of hands-on HVAC experience in either residential or commercial settings., • Valid Florida driver’s license with a clean driving history., • Capable of lifting up to 50 pounds and working outdoors in varying weather conditions., • Strong diagnostic and problem-solving abilities., • Excellent interpersonal and customer service skills. Expected hours: No less than 40 per week Benefits: • 401(k), • Company truck, • Dental insurance, • Health insurance, • Paid time off, • 8 hour shift, • Nights as needed, • On call, • Overtime

Job Description CDL-A Owner Operator drivers are needed in Orlando, FL, for contract work. • Job Types: Full-time, Contract, • Local lanes (<500 miles daily), • Local liquid and hopper lanes, • Flexible scheduling (weekend work available), • Average $3,000-$4,000 weekly, • Fuel surcharge program, • Tanker, TWIC, and Haz-Mat endorsements required (can begin while waiting for Haz-Mat to be completed), • Weekly average 50-70 hours Powered by JazzHR 9NKmVP7NUk

Job Description Job Summary • Utilizing proper tools, equipment and processes to assemble, soldier, and crimp wired electronic components by following instructions and processes described in various forms of documentation and quality specifications., • Must have the ability to conduct:, • Wiring assembly, • Limited testing, • Troubleshooting, • Inspect Essential Duties and Responsibilities • Assemble components into housing/s & sub-assemblies making required interconnections using soldering, crimping, and other techniques as specified, working to Class 3 workmanship standards. IPC J-STD-001, • Fabricate cable assemblies using soldering, crimping, and other techniques as required to IPC-A-610 & IPC/WHMA-A- 620 standards., • Soldering wires of 32AWG under a microscope, as required., • Assembling products or sub-assemblies in a clean room manufacturing environment, according to verbal or written instructions or following drawings, and/or predefined assembly procedures., • Working to very tight tolerances on assembled parts., • Operate hand tools, power tools, and/or production equipment to include manual and automated testing., • Read and interpret blueprints and schematics., • Accurately record as-built information, traceability requirements, labor hours, and other statistics into computer databases to comply with customer requirements., • Assist other technicians/teammates, as required, with assembly processes and tasks, • Support other activities as assigned by Production Manager. Education and/or Experience • AS degree (preferred) or other formal education in electronics., • Minimum of 5 years of Wiring and Soldering experience, • Must have Certification in high reliability electronic assembly processes, per J-STD-001, IPC-A-610 & IPC/WHMA-A-620. Basic Employment Requirements • Excellent communication skills, self-motivated, capable of multitasking and high attention to detail., • Ability to interpret various forms of assembly documentation., • Ability to handle materials safely and lift up to 20 lbs., • Must be authorized to work in the US and be eligible to obtain a passport., • Must be able to work over-time as needed. Work Environment/Corporate Culture • The work environment is one of a professional office., • 9/80 Work schedule or as assigned by Production Manager., • Full benefits package including medical, dental, STD, LTD, GTL, 401K, Holidays, Vacation, paid time off to eligible employees., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Must pass Security background screening process.

Job DescriptionLane Valente Industries is a Leading International construction and facility maintenance company with offices throughout the U.S. and Canada. We have a strong in-house group of field technicians that services top U.S. corporations and are supported by top notch managers in our offices. We are always looking for talented people driven to be highly productive members of the team with an emphasis on integrity and learning. CURRENT OPPORTUNITY: HVAC JR. MECHANIC JOB RESPONSIBILITIES & REQUIREMENTS As an HVAC Apprentice you will assist experienced technicians with installing, maintaining, and repairing heating, ventilation, and air conditioning systems for a company that handles service work and site maintenance for national accounts. • Assist in the servicing products and equipment on assigned projects and ensuring customer satisfaction, • Uses a variety of hand-tools, following blueprints or engineering specifications, to diagnose and repair units., • Identifies, analyzes, diagnoses, and repairs systems and products at customer’s location., • Performs preventative maintenance, site surveys, replacement, and modifications as needed or requested by customers., • Prepares for on-site installation and repairs by examining building layout, anticipating difficulties, gathering materials and coordinating on-site work, as necessary., • Inspects vehicles by checking vehicle condition and cleanliness, • Maintains vehicles by keeping records of service, scheduling, and complete repairs and maintenance service, • Maintains equipment by inspecting for signs of wear. Notifies customer and/or Operations Manager of findings., • Documents work by completing paperwork on each job and maintaining files, • Represents company by serving as a direct customer contact., • Determines parts to order for repairs and timeliness of need, • Documents work by completing paperwork on each job, including daily time, progress, and duration; and maintaining files., • Records parts, material, labor, subs and other cost data per assignment and returns unused resources, • Turns in all required paperwork and reports in a timely manner., • Keeps current on all products concerning installation, operation, maintenance, service and repair, • Read and interpret product specifications, • Provides technical support to customers, • A strong willingness to learn and a positive attitude are crucial, • Flexibility to work overtime/weekends as necessary, • Regular travel requirements with some overnight travel, as needed BENEFITS OFFERED:, • Medical Insurance, • Dental Insurance, • Paid Vacations ldGGW6ekUs

Job DescriptionDescription: DASMEN Residential is seeking to hire a Maintenance Technician. SUMMARY:Performs routine maintenance in individual apartments, common areas, and amenity areas. Prepares vacant units for new move-ins. Performs routine preventive maintenance. Assists in various cleaning functions, and assists in monitoring the grounds. Maintains and repairs physical structures of buildings and maintains grounds by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES DAILY: • Performs service request as required., • Prepares vacant apartments for new move-ins., • Performs preventative maintenance duties as outlined in an annual Preventative Maintenance Program developed by the Maintenance Supervisor. Items such as replacements of air conditioning filters, cleaning air conditioning coils flushing hot water heaters, etc., • Receives written work orders or verbal instructions from supervisor., • Cuts grass and trims weeds on organization’s property, if necessary., • Digs flower beds and plants flowers, if necessary., • Constructs decorative flower garden borders from wood, if necessary., • Cleans internal areas of buildings, including dusting, sweeping, and mopping., • Washes windows., • Empties trash cans and consolidates trash for weekly pickup., • Paints interior and exterior walls and trim., • Repairs parking lot and sidewalks with asphalt, cold patching materials, and concrete., • Maintains and repairs buildings’ plumbing and electrical systems, including replacing worn or defective parts such as switches and fuses., • Maintains and repairs wood parts of buildings., • Replaces worn or damaged parts such as hoses, wiring, and belts, in machines and equipment such as trucks, street sweeper and other equipment used within the maintenance department., • Assists other departments with moving furniture and unloading and storing supplies., • Must have good communication skills with the general public., • Competitive salary & high bonus potential, • Medical, Dental, Vision Insurance, • Generous vacation and sick leave policy, • Extensive Paid Holidays, • Employee recognition and awards, • Free life insurance, • Short term disability, • Company-wide events, • A work family you can always rely on, • Employee Mentorship program, • Reimbursement program for industry schooling, • Employee housing discount, • Awarded Best Places to Work by multiple organizations, • Associate referral bonus, • Paid maternal and paternal leave, • Ongoing training, • Internal growth opportunities Compensation: $17-$20/hour

Job DescriptionDescription: HVAC Service Technician - United Air Temp – Immediate Opening United Air Temp, a trusted residential HVAC, plumbing, and electrical provider, is hiring an HVAC Service Technician to join our growing team. HVAC Service Technician Responsibilities • Perform residential HVAC tune-ups and preventative maintenance, • Diagnose and repair heating and cooling systems, • Complete service calls and install replacement parts, • Communicate findings and recommendations to customersHVAC Service Technician Qualifications, • 3+ years of HVAC service experience, • EPA 608 Certification (required), • Strong troubleshooting and customer service skills, • Professional, reliable, and team-orientedHVAC Service Technician Requirements, • High school diploma or equivalent, • Clean driving record (minimum 3 years), • Ability to pass a background check, • Ability to lift 75+ lbs. and work in varying conditions, • Authorized to work in the U.S.HVAC Service Technician Benefits, • Competitive pay with opportunities for advancement, • Health insurance and retirement plans

Job DescriptionMaterial Handler I | $18.00 per hour | Monday – Thursday 6 am – 4:30 pm What Matters Most • Competitive Pay of $18.00 hourly, • Schedule: Monday- Thursday; 6:00 am-4:30 pm /completion, • Location: Winter Park, FL, • Temporary-to-hire opportunity with career growth and stability, • Weekly Pay with direct deposit or pay card, • When you work through The Reserves Network, you are eligible to enroll in dental, vision and medical insurance as well as 401K, direct deposit and our referral bonus programJob Description:As a Material Handler you are responsible for supporting the manufacturing team by moving parts, operating a pallet jack, rolling carts, golf carts or forklifts while on shift. Maintain accurate documentation performing data entry of inventory.Responsibilities:, • Maintains accurate inventory records and ensures proper labeling/storage of materials, • Transports parts, WIP, finished goods, and mail across departments using material handling equipment (pallet jacks, tuggers, forklifts, etc.), • Completes required documentation for all material movements per SOP, • Ensures workspaces remain clean, safe, and organized, • Assists in onboarding and training of new staff in material handling procedures, • Uses computers for data entry, scanning, printing picklists, and reviewing schedules, • Follows verbal and written instructions; pays close attention to detailQualifications and Requirements:, • Three (3) years' experience in a warehouse environment., • Must have 2 years' computer experience with Excel and Microsoft Office., • 3 years Forklift experience preferred., • Ability to read English and Metric tape measures and use measuring devices., • Ability to perform all operations within acceptable inventory accuracy, quality and time standards., • Ability to recognize quality expected and be able to reproduce it.Benefits and Perks:, • $18.00 per hour, • Medical Benefits, • Holidays, • Training & GrowthYour New Organization:Make an impact by delivering industry-leading specialty vehicles that serve communities worldwide, from fire and emergency vehicles to commercial infrastructure trucks, street sweepers, and consumer leisure motorhomes and travel trailers. Our vehicles are manufactured in facilities across the United States, and we take pride in supporting and strengthening U.S. manufacturing.Your Career Partner:The Reserves Network, a veteran-founded and family-owned company, specializes in connecting exceptional talent with rewarding opportunities. With extensive industry experience, we are dedicated to helping you achieve your professional goals and shine in your field. The Reserves Network values diversity and encourages applicants from all backgrounds to apply. As an equal-opportunity employer, we foster an environment of respect, integrity, and trust in every aspect of employment.In the spirit of pay transparency, we want to share the base salary range for this position is $18.00 hourly not including benefits, potential bonuses or additional compensation. If you are hired, your base salary will be determined based on factors such as individual skills, qualifications, experience, and geographic location. In addition, we also believe in the importance of pay equity and consider the internal equity of our current team members as a part of any final offer. Please keep in mind that the range mentioned above is the full base salary range for the role. Hiring at the maximum of the range would not be typical in order to allow for future & continued salary growth

Job DescriptionDescription: National Airlines, based in Orlando, FL, operates passenger charter service as well as customized military and commercial air cargo carriages worldwide. National Airlines specializes in over-sized, time sensitive, and special handling requirements, utilizing 747-400 and A-330 aircraft to accomplish its missions. Job Title: Heavy Check Material Coordinator Location: Orlando, FL Department: Materials Reports To: Senior Director of Materials FLSA Status: Exempt Summary: The Heavy Check Material Coordinator is responsible for ensuring the timely, efficient, and cost-effective planning, procurement, and distribution of aircraft parts and materials in support of National Airlines' heavy maintenance operations. This role is critical in maintaining material readiness during scheduled and unscheduled maintenance events, with a strong focus on compliance, operational continuity, and effective inventory management. The ideal candidate brings aviation materials experience, a strong understanding of FAA regulatory requirements, and the ability to operate in a fast-paced, collaborative environment. Essential Functions: • Procure, repair, and stock aircraft components in compliance with National Airlines’ General Maintenance Manual (GMM), company policies, and FAA regulations., • Source and acquire materials and components at or below market value for Aircraft on Ground (AOG) and other critical maintenance scenarios., • Track material usage trends during heavy checks and recommend adjustments to safety stock levels to support future maintenance events., • Identify, source, and facilitate delivery of scheduled and unscheduled maintenance material requirements in real time., • Serve as the primary liaison between Maintenance, Planning, and the Heavy Maintenance Material Representatives to ensure material availability aligns with work packages., • Maintain daily communication with heavy check teams to address emergent needs and minimize delays in aircraft turnaround times., • Monitor borrowed or loaned parts and ensure timely return to vendors or lending organizations to reduce exposure to penalty costs., • Review and verify all parts used in maintenance are approved and properly documented; notify the Quality Assurance department for any updates required to the approved parts listing., • Accurately input and manage inventory data within National Airlines’ computerized inventory control system., • Monitor inventory levels and ensure adequate quantities of high-usage and long-lead-time parts are available., • Coordinate the shipping, forwarding, and routing of aircraft components to outstations or maintenance facilities as needed., • Deliver comprehensive shift turnover documentation to the Materials Management team to ensure continuity and awareness of open items., • Ensure all material handling, procurement, and tracking activities are fully compliant with company procedures and FAA regulatory requirements., • Maintain accurate documentation for audits, inspections, and reporting purposes., • Support quality control efforts and assist with ensuring alignment to internal compliance standards and industry best practices., • Bachelor’s degree in supply chain management, Aviation, or a related field preferred; 3–5 years of relevant experience may be considered in lieu of degree., • Minimum of 2 years of experience in aircraft parts procurement or inventory control, with preference for candidates experienced in heavy maintenance environments., • Must be fluent in English (reading, writing, and speaking)., • Valid U.S. driver’s license required; driving record must meet company insurance standards., • Must be legally authorized to work in the United States., • Must successfully pass a background check, which includes drug testing, fingerprinting, and a Criminal History Records Check (CHRC)., • Availability for domestic and international travel; as required, • Solid understanding of aircraft maintenance operations and materials handling procedures., • Ability to interpret and use technical manuals, including illustrated parts catalogs., • High proficiency in Microsoft Office applications (Excel, Word, PowerPoint)., • Excellent communication, organizational, and interpersonal skills., • Ability to work independently and collaboratively in a dynamic, fast-paced environment., • Strong problem-solving skills and a proactive approach to operational challenges., • Attention to detail and commitment to accuracy in documentation and reporting., • Must be able to lift and carry items weighing up to 70 pounds occasionally and up to 50 pounds frequently., • Work is primarily performed in an office and stockroom setting. The duties listed above are intended only as illustrations of various types of work that may be performed.? The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. National Air Cargo is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, disability, Protected Veteran status, genetic information, pregnancy, or any other legally protected status. We prohibit discrimination in all aspects of employment, including recruitment, hiring, compensation, benefits, training, termination, promotions or other conditions of employment or career development.? We take affirmative steps to hire and advance females, racial minorities, Protected Veterans, and Individuals with Disabilities.? We offer Reasonable Accommodations where necessary to candidates for employment and to our qualified employees with disabilities. National Airlines also expects all our employees to support and promote our Safety Management System (SMS) Safety Policy and Safety Objectives. Employees at all levels of the organization are encouraged to report safety concerns or hazards without fear of reprisal. Requirements:

Job DescriptionDescription: Maintenance Supervisor/Community Manager No one Hourly (Non Exempt eligible for overtime) The Maintenance Technician is to maintain the day-to-day operations and to assume responsibility for maintaining the physical asset of the property under the direction of the Maintenance Supervisor and Community Manager. Troubleshooting and solving mechanical issues all while keeping the property operating smoothly according to safety standards and ensuring the timely and accurate fulfillment of all service requests and repairs. This position is also active in assisting with supply purchases and bids under management supervisor. High levels of customer service as well as the cleanliness and marketability of the community to renew and secure new leases is critical to this position. Qualifications Each duty must be performed with the focus and accuracy it requires. The essential knowledge, skills and abilities you need are outlined below. Reasonable accommodations may be made to enable individuals with disabilities to perform the job’s essential functions. Responsibilities • Attend and participate in technical training programs to maintain personal skill level., • Organize, prioritize and ensure service requests and repairs are made correctly and in timely manner., • Inspect grounds, buildings, and other community features daily to minimize liability concerns and ensure excellent curb appeal at all times., • Assist with turnkey operations if needed., • Assist Maintenance Supervisor with monitoring inventory of parts and supplies at appropriate levels., • Adhere to the Standard Operating Procedures., • Help the Maintenance Supervisor to ensure staff is motivated and functions as an effective team., • Maintain a superior customer service relationship with residents, co-workers, vendors, and the community., • Communicate effectively with residents, co-workers, vendors, and the community., • Work with the Maintenance Supervisor to maintain an effective preventative maintenance program., • Work with the Maintenance Supervisor to adhere to budgeted guidelines., • Work with the Maintenance supervisor to ensure physical condition of community is maintained according to company operating and safety standards., • Work with the service team to ensure excellent curb appeal at all times., • Assist the Maintenance Supervisor in maintaining hazard communications program to include the staff’s safety training and MSDS binder., • Ensure adherence to the company’s safety and hazard communications programs, policies and procedures., • A High School education or equivalent is required., • Ability to fluently read and write English., • Accurately perform intermediate mathematical. Professional Experience • One to two years minimum experience in community management maintenance, other building maintenance or related trade. Renovation experience may be required for older communities built five or more years ago. Attendance/Travel • Ability to work any of the seven days of the week, 52 weeks of the year. Our property staffing limitation makes it critical for you to work your scheduled hours consistently as well as overtime if necessary when requested., • Ability to serve on-call, as scheduled or as necessary. On-call staff is required to live within a minimum distance to the property for efficient response time., • Ability to travel to company training classes or to work at other properties as requested. TYPICAL PHYSICAL DEMANDS Will be exposed to constant activity that requires intermittent standing, bending, crouching, pushing/pulling, lifting/moving/carrying (light to heavy weight material/appliances/equipment up to 50 pounds for variable distances), climbing ladders/stairs, and walking on rooftops without endangering yourself, residents or co-workers. Requires manual dexterity sufficient to operate small-motorized equipment (i.e., repetitive hand/wrist, griping and elbow motion). Must have normal range of hearing, vision, color discrimination and depth perception for proper operation and repair of machines, wiring, and equipment. Must be able to complete tasks wearing appropriate safety equipment (i.e., back belts, goggles, masks, gloves, etc.). TYPICAL MENTAL DEMANDS Must be able to read and write in English at intermediate level to read diagrams, meters, instructions, write reports, etc. Must be able to apply common sense understanding to carry out instructions and plans. On a regular basis must use independent judgment (following prescribed procedures) to determine actions to be taken, priorities, emergencies, etc. Will interact regularly with residents, vendors, contractors, supervisors, employees and coworkers and therefore, must have excellent interpersonal skills. ENVIRONMENTAL/WORKING CONDITIONS Will be exposed on a regular basis to outdoor environment (i.e., heat, cold, damp, rain, etc.). Will also have light to moderate exposure to injuries (i.e., chemicals, electrical, machinery, tools, lifting, etc.). Will be exposed to some low-level noise when using power tools. Hazards can be minimized with proper lifting techniques, MSDS and general safety training and wearing of proper safety equipment. Licenses/Equipment • Valid driver’s license and current automobile insurance is required; position requires own vehicle to fulfill all of job’s functions., • EPA certification Type I and II., • Pest Control, if performed in house., • Other licenses and certification as required by Bainbridge, state or federal law., • Own set of basic hand tools; tools not provided by property., • Use of general maintenance equipment including but not limited to: hand tools, ladders, refrigerant recovery units, landscaping equipment and required safety equipment, all equipment must be used without jeopardizing the safety of yourself, fellow associates or residents., • Appropriate safety equipment and apparel that includes proper footwear, such as work boots. Skills • Ability to read, analyze and interpret all forms of information, • Excellent written and verbal communication skills, • Ability to accept and learn from constructive criticism, • Well organized, detail oriented, efficient, • Ability to prioritize and multi-task, • Must be team oriented but able to work independently on occasion, • Strong analytical and problem solving skills, • Strong customer service orientation, • Ability to meet deadlines which may include late hours and weekend as needed, • Ability to follow oral and written instruction Special skills include ability to diagnose problems with and repair the following: • Major appliances, • HVAC, with EPS Certification, • Basic to intermediate plumbing, sheet-rock, general carpentry, • Basic to intermediate electrical, when no license is required, • Pool care and pest control if required by property, • Roofs and gutters, • Wallpaper/painting, • Irrigation maintenance and repairs, • Landscaping, • Fountain maintenance and repairs, • Foundation/sidewalk repairs, • Ice/snow removal, • Golf carts and small engine maintenance Computer Skills • Basic computer and Internet knowledge, • Ability to use Outlook, • Ability to operate and understand personal computer functions and company utilized software packages Learning and Development • Commit to ongoing professional development and career growth Career Apparel • Must wear career apparel based on defined company standard The Bainbridge Companies is an equal opportunity employer. Qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Job Description Are you a dependable, team-oriented individual with a can-do attitude? We are looking for you! Our Warehouse Team Members serve as a key link between our company and our customer base of collision repair shops in the region. The goal for each Warehouse Associate is to be a team player and be able and willing to go the extra mile. Shift Hours: 6:00 AM - 3:00 PM, M-F Shift Hours: 10:00 AM - 7:00 PM, M-F Responsibilities: • Processing, picking, and shipping orders accurately, • Organizing stocks and maintaining inventory, • Inspecting products for defects and damages, • Examining ingoing and outgoing deliveries, • Organizing warehouse space, • Receiving, unloading, and placing incoming inventory items appropriately, • Checking, verifying, and filling customer invoices, • Abiding by all company safety and hygiene regulations, • Keeping warehouse clean and organized daily, • Performing duties as assigned by supervisor, • Must have at least 6 months order/cherry picker lift experience, • Possess a friendly and sincere demeanor, • Ability to work well in a team environment, • Be able to multi-task and be detail-oriented, • Have previous experience or knowledge of auto parts (forklift training and certification is a plus!), • Have a high school diploma or equivalent is a plus, • Must be able to engage in frequent, repeated, rapid, and/or strenuous physical activity for long periods of time, • Must have at least 6 months order/cherry picker lift experience, • Must be able to lift up to 70 lbs. and knowledge of how to lift and carry objects safely, cautiously, and effectively, • Must be able to safely operate equipment, observe safety procedures, and meet safety requirements, • Staging, loading, unloading parts, and stocking, locating, and maintaining warehouse inventory, • Responsibilities include pulling orders for delivery and shipment, • Ability to operate a forklift, hand truck, pallet jack, and other warehouse equipment, • Health, Dental & Vision Insurance, • Health Savings Account (HSA) with Employer Contribution, • Optional Life Insurance, Long & Short-Term Disability, Critical Illness, Accident and Hospital Insurance, • 401K Retirement Plan, • Paid Training, • Paid Time Off, • Paid Sick Days, • Paid Holidays, Including 1 Floating Holiday (Your Birthday), • Weekly Pay, • Casual Dress Code, • Teamwork Environment, • Free Company Apparel

Job Description Get paid DAILY! We’ve partnered with Rain to offer you the ability to get 50% of your pay within hours of your shift every day! Neighborhood Restaurant Partners has been a franchisee of Applebee's for over 30 years and operates over 65 restaurants in the Southeast. Our restaurants are located in Southern Georgia, Southern Alabama and parts of Florida include the Panhandle, the greater Tampa Bay & Orlando areas and the Space Coast. AT NRP, we celebrate diversity, achievement and quality as we provide memorable experiences to our Neighborhood Guests and a place to belong for our Team Members. We're looking for Full Time & Part Time: * COOKS / KITCHEN TEAM MEMBERS Requirement: * All Cooks must be 18 years of age, or older. * Previous Cook / Kitchen / Professional Culinary experience strongly preferred * Must be eligible to work in the US If you have a commitment to creating the best quality food for our guests and the drive to succeed, we want to hear from you! What’s in it for you? We can offer you: • Competitive wages, • A great work atmosphere Applebee’s is a well established, full service restaurant concept that has growth opportunities for team We offer great restaurant culinary careers for line cooks who have back of house experience in a high volume restaurant environment. We're also looking for concineros / cocineras who have cooking, chef, saute cook or grill cook kitchen experience.

Job Description At Cuningham, we don’t just design spaces; we create worlds. We believe great design shapes how people feel, explore, and connect, transforming environments into memorable, story-driven experiences. Our teams collaborate across disciplines to craft immersive destinations that spark curiosity and bring people together. We are seeking a Senior Project Interior Designer with 8 to 12 years of experience who thrives at the intersection of design and storytelling. In this role, you will lead complex, experience-driven projects, guiding teams, and translating bold ideas into cohesive, guest-centered environments. Experience in themed entertainment and hospitality is essential. This role is perfect for a designer who loves translating big ideas into technically sound, guest-centered environments, layering materials, lighting, detailing, and spatial sequencing to create unforgettable experiences. What you will be doing: • Lead interior design from concept through construction, shaping creative vision and project outcomes, • Develop and present compelling interior concepts, storytelling, and design presentations, • Ability to produce and document detailed interior design construction documents, including specifications coordination and integration across disciplines, • Direct selection and specification of materials, finishes, lighting, and FF&E, • Coordinate interiors with architecture, consultants, and multidisciplinary teams to deliver cohesive solutions, • Mentor and support designers while contributing to a collaborative, high-performing team, • Partner with clients to translate ideas into thoughtful, buildable design solutions, • Oversee interior documentation, detailing, and code coordination through all project phases, • Participate in construction administration and site observations to ensure design intent, • Contribute to project pursuits, proposals, and client interviews, • Proficiency in Revit/BIM 360, Bluebeam, Adobe Creative Suite, and Microsoft OfficeWhat we look for:, • 8–12 years of professional experience in interior design., • Experience in themed entertainment and hospitality projects required, though experience in other markets is welcomed., • Demonstrated ability to successfully collaborate on large and complex project scopes and mentor team members., • Strong design, technical, and documentation skills., • Excellent communication and client relationship management skills. Cuningham is an Equal Opportunity/Affirmative Action Employer and values the strength diversity brings to the workplace when combined with equity and justice. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, marital status, age, genetic information, national origin, disability, military, or veteran status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description You in this Role You’re hands-on, detail-oriented, and take pride in building things the right way. As a Motor Assembler, you’ll be a key part of our production team, soldering, bonding, and fitting components to deliver motors that power the future of FPV and drone technology. You enjoy working with your hands, following precise instructions, and contributing to a fast-paced, collaborative environment. What You’ll Do • Assemble motor components using fixtures, presses, adhesives, and hand tools., • Perform soldering of motor wires and terminals to meet quality standards., • Inspect and identify good vs. defective parts and escalate issues promptly., • Follow detailed work instructions and accurately maintain documentation., • Collaborate with manufacturing engineers and technicians to ensure smooth production flow., • Complete startup and shutdown procedures for each shift., • Maintain a clean, organized, and safe work area. What You Bring • Prior experience in assembly or soldering (preferred)., • Strong manual dexterity, hand-eye coordination, and attention to detail., • Comfort with repetitive tasks and sitting for extended periods., • Ability to clearly communicate issues and defects., • Previous experience working overnight shifts., • Hands-on experience in advanced motor assembly and soldering techniques., • Exposure to a fast-growing company at the forefront of U.S. drone manufacturing., • The chance to collaborate closely with engineers and technicians on cutting-edge products. Compensation & Benefits • Hourly pay $28.80 (11:00pm to 7:30 am), • Comprehensive benefits package after 60 days, including medical, dental, and vision insurance., • 401(k), • Paid Time Off (PTO) . At Unusual Machines, you’ll join a team of builders, creators, and problem-solvers who thrive on ingenuity and collaboration. We’re passionate about making high-performance drone technology in the U.S. and supporting each other in the process. About Us Unusual Machines (UMAC) is a U.S.-based drone and FPV technology company that owns and operates Rotor Riot, Fat Shark, and other leading brands. We design, manufacture, and deliver cutting-edge drones, components, and experiences to customers worldwide. Our mission is to bring high-performance drone manufacturing back to the U.S. while fostering a culture of performance, responsiveness, ingenuity, moxie, and empathy.

Job Description Location: Morocco ECS is seeking experienced Maintenance Technicians to provide AH-64E LCT maintenance in Morocco. Responsibilities • Provide maintenance and sustainment operations to ensure availability for training of AH-64E LCT., • Provide on-site maintenance and supply repair/replacement of parts for the AH-64E LCT., • Shall Implement a Failure Reporting, Analysis, and Corrective Action System (FRACAS) for Supported TADSS, • Perform scheduled, preventive, and corrective maintenance of TADSS and Foreign Government Furnished Property (GFP) in accordance with and in order of precedence, the applicable Technical Manuals (TMs) for each TADSS, Government-provided preventive maintenance checklists, or best commercial practices if a checklist is not provided., • Maintain TADSS and Foreign Government Furnished Property (FGFP) in Fully Mission Capable (FMC) condition to meet the Contract Mission Time (CMT) and Contractor Performance Factor (CPF) requirements in Appendix B for each device and location., • On-site maintenance performed IAW technical data; if technical data/checklist is not provided for any single item, maintenance IAW the best commercial standards. Maintain all the documentation (Operator & Maintainer Manual, Commercial Off- The-Shelf Manual, Technical Data Package Schematics and Cold Start Procedures), spares and tools., • On-site maintenance coordinated with the local installations designated Foreign Government representative to deconflict training, exercise, and test schedules with maintenance activities, and resolve problems on the devices or at the site., • The SUB shall be on-site to repair /provide corrective actions to the system IAW the documented Scheduled Maintenance/Preventative Maintenance Checks and Services., • To review/report facility issues that cause Non-Fair Wear and Tear (NFWT) to simulator devices., • The on-site maintenance does not interfere with training unless authorized by the designated Government representative., • Work Orders are logged into the Information System Tool Suite (ISTS) with all maintenance information, including Foreign GFP parts/spares obtained from RSLFAC., • Data logged into the ISTS is accurate and complete. Qualifications: • Prior military experience, • TADSS maintenance instruction training and troubleshooting experience based on the TADSS maintenance manuals, products/materials/packages, for the TADSS maintenance services., • TADSS operator services experience for aviation flight simulators and aviation TADSS, • Good writing, interpersonal communication and problem-solving skills are required., • Ability to communicate effectively with internal management and customer management., • Ability to plan and manage schedules., • Valid Passport/DL Location: Rabat, Morocco Life support provided to include local healthcare plan, visa, housing, and transportation

Job DescriptionJob description Job Title: Skilled Maintenance Technician Location: Winter Park, Orlando Area Job Type: Full-Time Overview: We are seeking a skilled and experienced Maintenance Technician to join our dedicated team. In this hands-on role, you will be responsible for maintaining and repairing a wide range of facility equipment and systems to ensure peak operational performance. Your expertise in both electrical and mechanical maintenance will be vital to supporting our operational excellence and delivering outstanding service to our clients. Key Responsibilities: • Perform routine maintenance and repairs on HVAC systems, plumbing, and electrical systems., • Diagnose and repair irrigation systems and related equipment., • Fabricate or modify parts as needed to support maintenance and minimize equipment downtime., • Conduct on-site visits to troubleshoot and resolve equipment issues efficiently., • Maintain a safe, clean, and organized work environment in collaboration with the team., • Accurately document maintenance activities, including repairs, inspections, and equipment modifications., • Proven experience as a Maintenance Technician or in a similar maintenance role., • Strong working knowledge of electrical, mechanical, and plumbing systems., • Familiarity with tools, diagnostic equipment, and maintenance techniques., • Ability to troubleshoot and solve problems quickly and effectively., • Excellent communication and interpersonal skills, with a customer-first mindset., • Ability to work independently and as part of a team., • Strong commitment to workplace safety and adherence to safety protocols. Ready to Apply? Submit your resume and a brief cover letter. We look forward to learning more about how your experience and skills can contribute to our team! Job Type: Full-time Pay: $19.85 - $25.00 per hour Benefits: • 401(k), • Dental insurance, • Flexible schedule, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 10 hour shift, • 8 hour shift, • Day shift, • Monday to Friday, • On call, • Rotating weekends, • Weekends as needed Work Location: In person

Job DescriptionCompany Description Preferred Apartment Communities combines expertise with a people-first approach, delivering consistent care and communities that feel like home. Our mission is to provide exceptional living experiences for our residents while building a workplace where our associates feel supported, inspired, and prepared to grow. Guided by the belief that we should always be better today than yesterday, we champion continuous improvement across every level of our organization. Through operational excellence, strategic partnerships, and a people-focused approach, we strive to be good neighbors to our residents, to each other, and to the communities we serve. Job Description Responsibilities: Assist in all maintenance requests, preventative maintenance, and amenity area maintenance for the apartment community. Completes maintenance work orders for residents (service appliances, plumbing, HVAC systems, minor electrical, gate systems, pool operations, etc.). Responds and resolves emergency maintenance requests for after business hours calls (weeknights, weekends, and holidays). Prepares vacant apartments to make rent ready. Performs preventative maintenance work. Keep the maintenance shop clean and organized; maintains adequate stock/inventory of parts for equipment, appliances, etc. Interacts directly with residents. Maintains logbooks and databases; enters service requests and status updates into database. Assists in monitoring contractors work performance. Supports the Maintenance Manager in meeting budget responsibilities. Follows and promotes company policies and procedures. Must make Customer Service a priority. If the property does not have a housekeeper, Apartment Maintenance Technician light cleaning duties will be required such as cleaning models, club houses, leasing office, emptying trash, cleaning the grounds and amenity areas, etc. Maintain (clean, orderly, and in working conditions) all amenity areas (pool, compactors, weight rooms, parking decks, etc.) Customer Service Responsibilities A complete clean and neat uniform must be worn when working on any PAA Property including nights and weekends, if applicable. Personal appearance must be clean and neat at all times, according to PAA policy. Communicate with residents and prospects in a manner consistent with PAA's standards. Read and/or listen to resident requests/complaints. Receive resident complaints in a calm, open and professional manner. Solve problems quickly, usually within 24 hours, or contact supervisor for immediate assistance. Deliver newsletters, correspondence, etc. to residents' apartment. Coordinate, set up, attend, and clean up after resident functions (food, tables, display areas, etc.) as requested by the Community Manager. Qualifications Requirements: 1-3 years maintenance experience (apartment maintenance experience preferred) Troubleshooting and problem-solving skills. Budget or basic business finance helpful. Refrigeration certification (type 2 or universal) or obtain in the first 90 days of employment. Valid driver's license (free from major moving violations) and dependable transportation. Physical Requirements: Must be able to use various hand tools and test equipment. Must be able to bend, stoop, and kneel for extended periods of time. Must be able to push and pull up to 300 pounds on wheels. Must be able to lift up to 50 pounds. Must be able to climb ladders of up to 40 feet in height. Must be able to use a hand-truck. Special Physical Requirements As part of your daily maintenance routine, you may be required to move appliances from one apartment unit to another apartment unit on opposite ends of the property. The appliance may have to be transferred by means of a hand truck up one to three flights of steps. These appliances will range in weight from 75 to well over 300 pounds. Commercial laundry rooms are equipped with single washing machines and/or stacked (double) clothes dryers which you will be required to move in order to repair and perform preventative maintenance. These machines range in weight from 120 to 300 pounds. On occasion, you may be involved in repairs to the building structure. You may be required to move or transport several different building type materials weighing several pounds to over 300 pounds. At certain times you will be required to perform maintenance on special equipment (i.e., exercise equipment, gas grills, golf carts, car washes, amenity areas, and security gates). All functions require different physical exertion, and their weight depends on the equipment (usually in excess of 100 pounds). You will be required to perform certain resident service functions or make upgrades to the apartment home. An example would be to install lighting or ceiling fans. Both duties would require the work to be done using a step ladder while lifting. Additional Information What We Offer: • Expected hourly pay rate of $23.50/hour, • Generous PTO program, • 13 paid holidays plus 3 floating holidays and paid volunteer day, • Comprehensive, affordable medical coverage as well as company-paid dental and vision coverage available to all full-time, regular associates, • 401k with exceptional employer match, • Associate Apartment Discount, • Educational Assistance Program (tuition and certifications) Review our privacy policy here: Preferred Apartment Communities is proud to be a US EPA ENERGY STAR® Partner.

Job DescriptionMaintenance Technician Job Description As a Maintenance Technician at RENT PROSPER, you will play a vital role in ensuring our properties are well-maintained and in excellent condition. Your key responsibilities will include addressing tenant maintenance requests and performing repairs. A typical day might also involve inspecting vacant properties, creating a scope of work, and completing all items for the turns/make readies. Requirements LARGE & OLDER-AGED COMMUNITY • 250+ Units in size., • 20+ years old. HVAC (AIR CONDITIONING): • Troubleshooting issues., • Various Brands/Models 10+ year old residential AC systems., • Repair, Remove and Replace parts., • Installations of handlers, compressors, & full systems., • Including: Coils, Freon, Compressor, Fan, Capacitor, Drain Line, etc. APPLIANCES: • Troubleshooting issues., • Various Brands/Models 10+ year old residential Appliances., • Repair, Remove and Replace parts., • Including: Stove/Range, Refrigerator, Washer/Dryer, Microwave, etc. PLUMBING: Remove and replace • Toilets, sinks, faucets, and shower heads., • Water supply lines and shutoff valves., • Bath/shower valves., • Water heaters., • Garbage disposals. ELECTRICAL: Remove and replace • Light and fan fixtures., • Switches and receptacles., • Install and connect appliances. (OTR Microwaves, dishwashers, garbage disposals, etc.) GENERAL/CARPENTRY/DRYWALL/PAINT: • Minor drywall repairs/patches., • Apply and blend texture., • Touch up painting., • Minor cabinet/countertop repairs., • Cleaning. PUNCHLISTS AND TURNOVERS: • Property Make Readies for tenant / resident move-ins., • Walk property, write scope of work, log in PM system, order items, perform repairs, and or schedule/manage vendors. PROPERTY MANAGEMENT SYSTEMS / WORK ORDERS: • Maintenance Requests and Work Orders via online tenant portal., • Work Orders reports, review, and analysis daily (triage & prioritization)., • Pictures and written documentation logged in PM system while at each repair site., • Weekly reporting to management team. OTHER JOB REQUIREMENTS: • Log Time In and Time Out for all jobs., • Take "before" and "after" pictures of repairs., • List all materials used and turn-in receipts., • POSITIVE ATTITUDE EVERY DAY!, • DO THE RIGHT THING EVERY TIME! Maintenance Technician Working Hours: Monday - Friday from 8:30am - 5:00pm After hours on-call duties are very rare and for EMERGENCIES ONLY. Benefits Maintenance Technician Compensation: • Competitive salary ranging from $26 to $27 per hour, • Bonus pay incentives for 5-star service!, • Generous Paid Time Off, • Paid holidays to celebrate with your loved ones, • Mileage reimbursement for work-related travel, • Comprehensive Health Insurance plan options This Maintenance Tech position is based at one of our multifamily properties called Walden Palms, located in the Millennia Mall area. The property has 300 units, and you’d be joining a skilled maintenance team of three — made up of one supervisor and two techs. Your focus would be on handling work orders and getting units move-in ready, which we call make readies or turnovers. Plus, here’s a perk: you won’t have to worry about exterior, grounds, or building maintenance—that’s all taken care of by a separate HOA team. About Our Company: Core Values: • Do the Right Thing., • Be Reliable., • Be Loyal., • Be a Problem Solver. Our company has both a Single Family Rentals Division and a Multifamily Division. We have full-time staff members in each, and we are always looking for rockstars that share our passion and values!

Job Description Maintenance Technician SPM, LLC – Kelson, Orlando FL Lead with care. Serve with pride. Build community. About the Opportunity: Are you a hands-on problem solver who takes pride in your work and thrives in a fast-paced environment? At SPM, LLC, we don’t just maintain apartment communities we create quality living experiences that feel like home. With over 45 years of experience and 200+ communities across 14 states, we’re one of the most respected names in multifamily real estate. From luxury living to affordable housing, student spaces to senior communities, we bring heart, hustle, and high performance to everything we do. As a Maintenance Technician at Kelson, you’ll be at the heart of that mission: ensuring our residents live in well-maintained, comfortable, and safe spaces they’re proud to call home. This is more than a maintenance job, it’s a chance to be a key part of a supportive team, grow your skills, and make a real difference in your community. What You’ll Do: • Take ownership of maintaining the physical condition of the community, inside and out., • Troubleshoot and repair HVAC systems, electrical issues, plumbing problems, and appliances (stoves, dishwashers, refrigerators, disposals, etc.)., • Complete service requests within 24 hours quickly, efficiently, and with care,, • Perform routine upkeep and preventive maintenance to keep everything running smoothly,, • Help maintain excellent curb appeal: remove debris, pressure wash exteriors, maintain grounds, and more., • Rotate on-call duties with the maintenance team for after-hours and occasional holiday/weekend support., • Keep inventory of commonly used parts and materials to control maintenance expenditures., • Previous property maintenance experience, • HVAC certification (preferred but not required), • Strong knowledge of HVAC, appliances, electrical, plumbing, and carpentry, • Great communication and teamwork skills, • A passion for providing exceptional customer service, • Ability to lift at least 50 pounds, • Full benefits package: Medical, Dental & Vision Insurance, • Voluntary Life & Disability Insurance to protect what matters most, • Paid holidays, personal, vacation, and sick time because work-life balance matters, • 401(k) with Employer Match invest in your future today, • Immediate Pay Access get your earned wages when YOU want them, • Real Impact: Your work helps improve lives every day, • Team Environment: We support one another and celebrate wins, • Career Stability & Growth: Join a company with over 50 years of excellence in property management with dedicated training, long-tenured leadership, and upward mobility, your career can truly flourish

Job DescriptionDescription: Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to be Part of Something BIGGER! Pro-Tech Air Conditioning & Plumbing Service, a Southern Home Services Company, is looking for a dynamic-HVAC Lead Install Technician to join a thriving business that believes in work life balance and cares about YOU! About this role: The HVAC Lead Install Technician is responsible for overseeing the installation, upgrade, and replacement of HVAC systems in residential properties. This role involves leading a team of technicians to ensure high-quality and efficient service delivery. The Lead Install Technician handles complex installations, provides technical expertise, and ensures compliance with industry standards and safety regulations. They are also responsible for customer interactions, resolving issues, and ensuring customer satisfaction. Additionally, the Lead Install Technician maintains a clean and organized work environment, manages inventory and tools, and contributes to team training and development. In this role, you will be responsible for: • Install, upgrade, and/or replace HVAC systems in residential homes with precision., • Cut, thread, and connect pipes (copper or PVC) and handle high and low voltage wiring., • Train and mentor Install Helpers on job sites and in the shop, enhancing their skills and knowledge., • Deliver exceptional customer service and communicate effectively with homeowners., • Handle physical tasks, including lifting, bending, and moving objects weighing over 50 pounds., • Maintain tools, parts, and the vehicle in an organized and clean condition., • Perform work safely at heights, in tight spaces (e.g., attics), and under various weather conditions (extreme heat or cold)., • Ensure adherence to appliance standards, the Occupational Health and Safety Act, and service standards., • 2-5+ year of HVAC experience, ideally within the residential market, showcasing hands-on technical skills., • Valid Driver’s License with a minimum of three years of experience, • Holds valid EPA certification for compliance with environmental regulations., • Possesses advanced troubleshooting and critical thinking skills to resolve complex HVAC issues., • Demonstrates a proactive and enthusiastic approach with a strong commitment to delivering high-quality work., • Prioritizes exceptional customer service and effectively addresses client needs and concerns., • Capable of interacting professionally with individuals at all levels within the organization., • Lifting 50 pounds regularly and up to 100 pounds occasionally, • Climbing ladders, accessing attics, navigating tight spaces, driving, entering crawlspaces, pushing, carrying, pulling, using hand tools, and performing fine detail work., • Ability to drive., • Working in various environments, including indoor and outdoor settings, attics, crawlspaces., • Ability to stand, walk and sit; talk or hear, both in person and by telephone., • Use hands to handle or feel objects or controls; reach with hands and arms., • Regularly stoop, kneel, bend, and crouch. Benefits: We offer a rewarding career path with great benefits, flexible schedules, professional and on-the-job training, and growth plans. Be a part of the team our customers call the finest in the industry. • Reliable, Year-Round Work, • Weekly Paychecks, • Paid Time Off and Paid Holidays, • Comprehensive Medical, Dental and Vision Benefits, • Health savings accounting, • Flexible spending account, • Growth Opportunities, • Employee discounts, • Company paid short term life insurance, • Life insurance Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization. Requirements:

Job DescriptionDescription: HVAC Install Helper Southern Home Services is a residential HVAC, Plumbing and Electrical company that acquires, owns, and operates businesses around the United States. We are seeking business leaders to join our growing team and become an integral part of our company's future. Are you ready to be Part of Something BIGGER! Pro-Tech Air Conditioning & Plumbing Service, a Southern Home Services Company, is looking for a dynamic-HVAC Install Helper to join a thriving business that believes in work life balance and cares about YOU! About this role: Assist the HVAC Lead Install Technician with the installation, upgrades, and replacements of HVAC systems in residential properties. Deliver exceptional customer service by ensuring a seamless and high-quality experience for every client, addressing their needs professionally and efficiently. In this role, you will be responsible for: • Assist in the installation of HVAC systems and equipment, ensuring compliance with service standards and customer specifications., • Conduct thorough checks of all installation aspects to prevent unnecessary callbacks and ensure optimal performance., • Adhere to appliance standards and Occupational Health and Safety regulations., • Maintain tools, parts, and the vehicle in a clean and organized manner., • Use floor savers and drop cloths to protect clients' property and keep the work area neat., • Meet scheduled appointments and on-call hours, ensuring timely job completion., • Perform work in tight spaces (e.g., attics, crawl spaces) and in various weather conditions, including extreme heat and cold., • Handle physical tasks such as lifting, bending, pushing, and moving objects weighing over 50 pounds., • Work safely on scaffolds and ladders at various heights., • Exhibits a positive attitude and unwavering commitment to delivering high-quality work., • Prioritizes exceptional customer service, consistently aiming to exceed client expectations., • Effectively interacts with individuals at all organizational levels, demonstrating professionalism and adaptability., • Flexible and innovative team player, thriving in dynamic environments and embracing change., • Holds a valid driver’s license with at least three years of driving experience., • Bilingual candidates are encouraged to apply; Spanish-speaking team leads are available to support and collaborate., • Computer requirements for this role include a basic understanding of using a PC and MS Office Suite, familiarity with phones and tablets, and the ability to access and manage email., • Candidates should have the ability to read and write effectively, ensuring clear communication and comprehension of job-related materials. Preferred Qualifications: • Lifting 50 pounds regularly and up to 100 pounds occasionally, • Climbing ladders, accessing attics, navigating tight spaces, driving, entering crawlspaces, pushing, carrying, pulling, using hand tools, and performing fine detail work., • Ability to drive., • Working in various environments, including indoor and outdoor settings, attics, crawlspaces., • Ability to stand, walk and sit; talk or hear, both in person and by telephone., • Use hands to handle or feel objects or controls; reach with hands and arms., • Regularly stoop, kneel, bend, and crouch., • The work requires regular exposure to extreme temperatures both indoors and outdoors, such as heat or cold, and adverse weather conditions such as wind, rain, ice or snow. Southern Home Services will make reasonable accommodations to allow an employee to perform the essential functions of the job. Benefits: We offer a rewarding career path with great benefits, flexible schedules, professional and on-the-job training, and growth plans. Be a part of the team our customers call the finest in the industry. • Reliable, Year-Round Work, • Weekly Paychecks, • Paid Time Off and Paid Holidays, • Comprehensive Medical, Dental and Vision Benefits, • Health savings accounting, • Flexible spending account, • Growth Opportunities, • Employee discounts, • Company paid short term life insurance, • Life insurance, • Company vehicle This is a Non-Exempt position. Southern Home Services is an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. The policy applies to all employment practices within our organization. Requirements:

Job DescriptionDescription: Maintenance Technician – Onsite Condo Community We are seeking a dedicated and reliable Maintenance Technician to join our onsite team at a vibrant condo community. This role offers an excellent opportunity to contribute to the upkeep and enhancement of our community’s living environment, ensuring residents enjoy a safe, comfortable, and well-maintained space. If you have a passion for property maintenance and excellent problem-solving skills, we encourage you to apply. The anticipated start date is Jan. 1, 2027 Key Responsibilities: • Perform routine inspections and preventative maintenance on building systems, appliances, and common areas, • Respond promptly to maintenance requests from residents and staff, resolving issues efficiently, • Conduct minor repairs and replacements of plumbing, electrical, HVAC, and carpentry systems, • Maintain accurate records of maintenance activities, work orders, and inventory, • Assist with landscaping, cleaning, and other general upkeep tasks as needed, • Ensure compliance with safety standards and building codes, • Collaborate with property management and vendors to coordinate larger repairs or projects Skills and Qualifications: • 2 + years of proven experience in property maintenance, facilities, or a similar role, • Knowledge of general electrical, plumbing, HVAC, and carpentry systems, • Familiar with safety procedures, • Ability to troubleshoot and resolve maintenance issues effectively, • Strong organizational and time-management skills, • Excellent communication and customer service skills, • Ability to work independently and as part of a team, • Valid driver’s license and reliable transportation, • Physical ability to perform manual tasks, including lifting, climbing, and standing for extended periods Our community values a positive, team-oriented culture that prioritizes resident satisfaction and property excellence. We offer opportunities for growth, ongoing training, and a supportive work environment where your skills can make a meaningful impact. Join us in maintaining a welcoming and well-maintained community for all residents. Requirements: • Perform general repairs and maintenance to building systems, • Complete work orders efficiently, maintaining high standards of quality and customer service, • Conduct routine inspections of common areas, amenities and equipment to identify potential issues, • Maintain grounds by performing tasks such as pressure washing, trash removal, light landscaping and minor repairs, • Monitor and maintain community tools, equipment and maintenance supplies, • Collaborate with outside vendors and contractors to complete larger projects when necessary, • Respond promptly to work orders and emergency requests, providing excellent customer service., • Ensure compliance with community rules, safety standards and regulatory requirements, • Outdoors, within the condominium community, • Regularly requires standing, walking, bending, lifting (up to 50lbs), climbing ladders and using had tools, • Potential exposure to chemicals used in cleaning/maintenance, noise from equipment and mechanical/electrical hazards, • Paid holidays, • Health, Dental, Vision and Life Insurance, • 401k Hunters Creek Area Work Conditions Environment & Work Setting • Work is performed in both indoor and outdoor environments, including but not limited to residential units, common areas, mechanical rooms, grounds, and exterior building spaces., • Exposure to heat, humidity, rain, cold, and seasonal weather changes is common during outdoor or emergency repair work., • Potential exposure to loud noises, dust, cleaning chemicals, paint, construction debris, and other typical maintenance-related materials.Physical Requirements, • Frequent walking, standing, bending, kneeling, crouching, climbing ladders, and working in tight or confined spaces., • Ability to lift, carry, push, or pull items up to 50 lbs, such as tools, equipment, appliances, and maintenance materials., • Regular use of hand tools, power tools, ladders, and maintenance equipment., • Work may involve reaching overhead, working at heights, or using equipment on uneven surfaces.Tools, Equipment & Safety, • Use of standard maintenance tools, power tools, lawn and grounds equipment, and HVAC, plumbing, or electrical tools as required., • Must follow all safety procedures, including lockout/tagout (LOTO), PPE requirements, chemical handling protocols, and equipment safety guidelines., • Occasional exposure to biohazards, pests, mold, or water leaks, requiring adherence to safety practices.Schedule & Operational Demands, • Primarily daytime hours, but may require:, • After-hours or weekend on-call duties, • Emergency response to urgent maintenance issues (e.g., leaks, electrical outages, HVAC failure), • Flexibility to adjust schedule based on community needs, • Workload can vary based on property demands, seasonal maintenance needs, or unexpected repairs.Resident & Staff Interaction, • Regular communication with residents, tenants, property managers, and vendors., • Requires maintaining a professional, courteous, and respectful demeanor, especially when entering occupied units., • May need to address resident concerns, provide repair updates, or explain maintenance outcomes.Work Pace & Conditions, • Work is often fast-paced and may involve multiple simultaneous tasks, urgent requests, and prioritizing work orders based on severity., • Technicians may need to respond to time-sensitive building issues without delay., • May involve performing repetitive maintenance tasks while also responding to unplanned issues.Technology & Reporting, • Use of mobile devices, maintenance software, or work-order systems to document repairs, log parts used, and track time., • Ability to read, understand, and follow written work orders, manuals, and safety instructions.

Job DescriptionUSPack is a leading logistics provider custom built for the evolving needs of businesses in today’s same-day delivery world. At USPack our focus every day is to help brands and businesses win in the delivery economy. That’s why we keep our finger on the pulse of the latest trends and developments that impact our business and our customers’ businesses. That’s how we stay ahead. That’s how we help our customers win. Find out more at: At USPack, we know our people set us apart. And that’s why we do everything we can to invest in them and help them grow every day.We don’t put people in jobs, we work with them to develop long-term career paths that are rewarding, challenging, and fulfilling. We’ve built an inclusive culture where everyone has a voice and a sense of belonging. We value input, we demand collaboration, and we recognize performance. We work together, we play together, and we succeed together! Get on the path to a successful career that delivers more! USPack’s Benefits for Full Time positions include: • 401(K) • Health Insurance • Disability/Life Insurance • Paid Time Off (PTO) • Paid Holidays USPack’s Benefits for Part Time positions include: • 401(K) • Paid Sick Time At USPack, our values are at the heart of everything we do, every day. They’re living breathing reminders of who we are, what we do and how we should treat those around us. They guide our actions, our interactions, and our decisions. They are what drive us. We are: Driven by integrity – We're driven by honesty, transparency, and trust. We know that actions speak louder than words. We hold ourselves to higher ethical standards that help build credibility and follow through on commitments. We believe that integrity isn't just a value, it's the compass that steers us toward success. Driven by a passion for service – We’re driven by doing more, by empowering others to succeed. We’re proactive problem solvers. We live for a challenge and we love to help. We go above and beyond. For us, service is more than a mindset, it’s a way of life. It’s our passion. Driven by collaboration – We’re driven by common goals, common understanding and uncommon communication. We start on the same page and work side-by-side, building momentum and measurable progress at every step along a shared path to success. Driven by accountability – We’re driven by a fierce sense of responsibility. We know the buck stops with us and we take that seriously. We hold ourselves accountable to our clients, to our environment and to each other. We don’t just say it, we show it. We make it happen and we measure it. Driven by innovation – We’re driven by what’s now and what’s next. For us it’s about never settling for the status quo. It’s about staying one step ahead and embracing change. It’s about pushing forward through shared ideas, new approaches, and new solutions to achieve things never thought possible. If you'd like to join the USPack Services Team, fill out our online application, or reach out to our Recruiting Team for current job opportunities at: Recruiting(AT)gouspack.com We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Purpose of Role The purpose of this role is to ensure the reliability and operation of machinery and auxiliary equipment in a plastic injection molding facility. The Maintenance Technician will complete preventive maintenance tasks according to schedule, and complete reactive troubleshooting to minimize equipment downtime. This individual will work in a manner that keeps themselves and their team members safe, while finding opportunities to improve work processes. What You’ll Do: As a Maintenance Technician, you’ll be the go-to expert for ensuring equipment reliability and efficiency. Your day-to-day impact will include: • Equipment Care & Repair – Inspect, troubleshoot, and repair injection molding machines, extrusion equipment, compressors, HVAC, fire suppression systems, and more., • Preventive Maintenance – Complete scheduled tasks across mechanical, electrical, pneumatic, and electronic systems to minimize downtime., • Process Improvement – Support engineering-led projects, kaizen events, and continuous improvement efforts that reduce scrap and increase efficiency., • Inventory & Facilities – Help manage spare parts inventory, assist with building repairs, and coordinate with contractors on system upgrades., • Emergency Response – Act fast when issues arise, performing timely troubleshooting and repairs to keep production moving., • High school diploma or equivalent (Associate’s or technical training a plus)., • Experience in mechanical, electrical, hydraulic, or pneumatic system repair., • Knowledge of injection molding, pneumatic conveying, chilled water systems, and grinders., • Skilled in using a multimeter for electrical troubleshooting., • Self-starter who can work independently and as part of a team., • Growth and advancement opportunities in a stable, well-established company., • Full benefits package including medical, dental, vision, PTO, 401(k), and more. Rehrig Pacific is a leading manufacturer of integrated sustainable solutions for the supply chain and environmental waste industries with a diverse customer list of industry leaders. We provide end-to-end solutions including returnable plastic products, delivery lifts and sleds, technology to track those assets, and a service team to ensure their longevity. Our team is dedicated to the values, mission, and unique culture within our organization that celebrates our people. We believe in fostering an environment where employees can be their authentic selves and know that they are viewed as integral members of the Rehrig Pacific Family.

Job DescriptionDescription: Meyer Distributing is looking for a Warehouse Operator to join our Orlando, FL team! The Warehouse Operator loads and unloads trucks, stocks products in appropriate locations, pulls stock and stages products for shipping, and operates powered industrial equipment (forklift/manlift), ensuring accuracy and timeliness of all job functions. Hourly Rate for Operator: • Stable schedule: 5-day work week ~40 hours, • 1st Shift: Monday - Friday: 6:00 am - 3:00 pm, • Ability to lift up to 75 pounds, • Ability to engage in repetitious bending and lifting, • Ability to operate equipment - forklift/manlift (cherry picker), • Must obtain forklift and manlift certification within 3 months, • Must be able to work up to 25 feet above ground level, • Medical with HSA option, • Vision, • Dental, • Disability, • Life Insurance, • 401K with Company Match, • Early Pay Opportunities, • Paid Holidays, • Paid Vacation & Personal Time, • Employee Discount, • Steel-Toe Footwear Annual Allowance, • Unload trucks and distribute products to appropriate area of warehouse for restocking, • Use scanners to place parts in proper bins and pulls orders, • Stock parts on racks in proper location, • Fill orders from warehouse stock and distributes items to shipping or to designated route driver/customer pick-up staging area, • Place product on pallets and wraps it in film and bands it using banding equipment, • Assist in counting and reconciliation of physical inventory, • Keep warehouse and work area clean and organized at all times, • Wear protective toed shoes and work in a safe manner at all times, • Move products manually and with the assistance of a forklift and manlift, • Load trucks and secures product

Job Description Maintenance Technician – 2nd Shift Location: Orlando, FL Pay: $17.25/hour – Paid Weekly Schedule: Monday–Friday, 4:30 PM – 1:30 AM Abacus Staffing is currently seeking a Maintenance Technician to support production and facility operations. This position is responsible for performing diversified maintenance duties to install, troubleshoot, repair, and maintain production machinery and facility equipment while following all safety and maintenance standards. Key Responsibilities • Install, set up, and perform basic maintenance on production equipment including tape machines, sealers, scales, printers, conveyors, and related machinery., • Maintain facility equipment such as fans, pallet jacks, carts, and other plant equipment., • Respond to emergency and unscheduled repairs during production hours., • Perform scheduled and preventative maintenance during planned service times., • Conduct basic machinist duties as needed., • Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems., • Read and interpret equipment manuals and work orders., • Diagnose equipment issues, replace or repair parts, test equipment, and make adjustments., • Use hand tools, power tools, meters, and material-handling equipment safely., • Identify faulty operations or defective materials and report issues to supervision., • Maintain a clean, safe, and organized work environment at all times., • Basic technical and mechanical aptitude, • Strong troubleshooting skills, • Results-driven with the ability to work independently, • Ethical conduct and strong communication skills, • Takes initiative and demonstrates reliability, • Physically capable of lifting up to 50 pounds unassisted, • Comfortable working at heights (8-step ladder or up to 30 ft scissor lift), • Health Insurance, • Dental Insurance, • Vision Insurance For more information or to apply, call or text Abacus Staffing: Office-(321) 343-7542 Alternate-(321) 338-3931

Job Description We’re seeking a Milling Machinist with strong experience in precision metal machining, machine setup, and mill operation. This role is ideal for someone who can work hands-on with milling equipment, produce quality parts to specification, and support efficient production in a fast-paced machining environment. The right person will have solid experience with HAAS equipment, strong setup and operation skills, and a high attention to detail in precision metal work. Key Responsibilities • Set up and operate CNC and manual milling machines to produce precision metal components, • Machine parts to blueprint specifications, required tolerances, and quality standards, • Perform machine setups, tool changes, offsets, and production adjustments as needed, • Operate milling equipment efficiently while maintaining quality and throughput expectations, • Read and interpret blueprints, work instructions, and machining documentation, • Inspect finished and in-process parts using measuring instruments and inspection tools, • Perform deburring and finishing work to ensure parts meet dimensional and cosmetic requirements, • Monitor machine performance and identify issues related to tooling, setup, material, or part quality, • Support production flow by maintaining organized work areas and keeping machines running effectively, • Work closely with supervisors, programmers, and quality personnel to resolve machining or quality concerns, • Maintain safe work practices and follow all shop procedures for equipment use and part handling, • Support continuous improvement efforts related to machining efficiency, scrap reduction, and quality output Required Qualifications • Experience operating and setting up milling machines in a machining or manufacturing environment, • Strong experience with HAAS equipment, • Experience with machine setup and production operation, • Strong background in precision metal machining, • Ability to read and interpret blueprints and machining documentation, • Experience using precision measuring tools such as calipers, micrometers, and gauges, • Experience with deburring and part finishing, • Strong attention to detail and commitment to quality, • Ability to work independently and maintain production standards in a shop environment Preferred Qualifications • DMG Mori experience is a plus, • Horizontal milling experience is a plus, • Experience working with tight tolerances and precision-machined metal parts, • Ability to make basic machine adjustments and support efficient setup changes, • Experience in a high-precision manufacturing environment such as aerospace, medical, defense, or industrial machining Design Hire is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law. Employment Eligibility: If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment. Company DescriptionWe are a boutique recruitment agency prioritizing excellence over volume, specializing in Engineering, Design, and IT. Our team consists of degreed engineers and seasoned recruiters. This unique blend of technical backgrounds equips us to effectively match candidates with even the most demanding roles.We are a boutique recruitment agency prioritizing excellence over volume, specializing in Engineering, Design, and IT. Our team consists of degreed engineers and seasoned recruiters. This unique blend of technical backgrounds equips us to effectively match candidates with even the most demanding roles.

Job Description Location: Morocco ECS is seeking experienced Maintenance Technicians to provide AH-64E LCT maintenance in Morocco. Responsibilities • Provide maintenance and sustainment operations to ensure availability for training of AH-64E LCT., • Provide on-site maintenance and supply repair/replacement of parts for the AH-64E LCT., • Shall Implement a Failure Reporting, Analysis, and Corrective Action System (FRACAS) for Supported TADSS, • Perform scheduled, preventive, and corrective maintenance of TADSS and Foreign Government Furnished Property (GFP) in accordance with and in order of precedence, the applicable Technical Manuals (TMs) for each TADSS, Government-provided preventive maintenance checklists, or best commercial practices if a checklist is not provided., • Maintain TADSS and Foreign Government Furnished Property (FGFP) in Fully Mission Capable (FMC) condition to meet the Contract Mission Time (CMT) and Contractor Performance Factor (CPF) requirements in Appendix B for each device and location., • On-site maintenance performed IAW technical data; if technical data/checklist is not provided for any single item, maintenance IAW the best commercial standards. Maintain all the documentation (Operator & Maintainer Manual, Commercial Off- The-Shelf Manual, Technical Data Package Schematics and Cold Start Procedures), spares and tools., • On-site maintenance coordinated with the local installations designated Foreign Government representative to deconflict training, exercise, and test schedules with maintenance activities, and resolve problems on the devices or at the site., • The SUB shall be on-site to repair /provide corrective actions to the system IAW the documented Scheduled Maintenance/Preventative Maintenance Checks and Services., • To review/report facility issues that cause Non-Fair Wear and Tear (NFWT) to simulator devices., • The on-site maintenance does not interfere with training unless authorized by the designated Government representative., • Work Orders are logged into the Information System Tool Suite (ISTS) with all maintenance information, including Foreign GFP parts/spares obtained from RSLFAC., • Data logged into the ISTS is accurate and complete. Qualifications: • Prior military experience, • TADSS maintenance instruction training and troubleshooting experience based on the TADSS maintenance manuals, products/materials/packages, for the TADSS maintenance services., • TADSS operator services experience for aviation flight simulators and aviation TADSS, • Good writing, interpersonal communication and problem-solving skills are required., • Ability to communicate effectively with internal management and customer management., • Ability to plan and manage schedules., • Valid Passport/DL Location: Rabat, Morocco Life support provided to include local healthcare plan, visa, housing, and transportation

Job Description Job Title: Assembly Employment Type: Full-Time Classification: Non-Exempt Reports To: Assembly Team Leader Pay Range: $18.50 to $26.25 (Compensation is based on a combination of your skills, background, and the needs of the role.) Location: Orlando, Florida (Compensation is based on a combination of your skills, background, and the needs of the role) Why Regal? For over five decades, Regal Boats has been a beacon of excellence in the boating industry. As a family-owned and operated company since 1969, we take immense pride in our tradition of craftsmanship and quality. With a dedicated team of 600+ skilled members, we have continued to innovate and build stunning 20-50 foot boats that embody the essence of luxury and performance. What sets Regal Boats apart is our status as a privately owned company, allowing us to stay true to our values and focus on our team members. We believe in the power of nurturing our team, fostering a culture of growth, and offering advancement opportunities. At Regal Boats, your passion for boating and dedication will be rewarded with a fulfilling and dynamic career journey. Our Purpose: Honor God & Enrich Lives. Our Mission: With God’s help we will develop an exceptional team dedicated to enriching lives and providing an awesome boating experience. JOB DESCRIPTION Summary Regal Boats is seeking a motivated self-starter to join our team as an Assembler. Assemblers are responsible for the installation and assembly of Regal’s boats following specific Workmanship Instructions (WI) for each model. Key Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Assemble parts onto the boat per the description of the Sales order by using the correct tools and proper methods to attain the correct standard in the installation., • Follow proper safety requirements for the use of hand tools, drills, screw guns, and other equipment., • Inspects all parts after production to ensure that all parts are complete and up to quality standards. You are responsible for the quality of work you perform., • Be able to use a variety of hand tools. Ex. - razor knives, screwgun, drill and tape measure, • Must have basic knowledge of mechanical and electrical parts, • Must be able to work under time constraints and deadlines, • Follow instructions of Leadership when doing miscellaneous duties, • Work with a team to complete daily tasks, • Must have strong attention to detail, • Able to keep the work area clean and orderly, • Conversational English Preferred Qualifications • Previous Manufacturing Experience, • Previous work history in Electrical, Plumbing, Mechanics, etc., • Ability to read and comprehend technical documents Work Environment Must be able to work in a non-climate controlled environment where ambient air temperature can exceed outside air temperature reaching over 100 degrees fahrenheit at times. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to bend at the waist and knees and stand for extended periods of time. The employee is frequently required to walk; climb or balance; stoop, kneel, crouch, crawl, and climb into and out of the boats using stairs. The employee must frequently be able to lift 50 pounds, work 10 hour days with most of the time being on your feet, and work overtime, whether planned or unplanned. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO Statement Regal Marine Industries, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Regal Marine Industries, Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Regal Marine Industries, Inc. expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Regal Marine Industries, Inc.’s employees to perform their job duties may result in discipline up to and including discharge. This job offer is contingent upon passing a mandatory pre-employment drug test and the receipt of background results that are in compliance with the current company policy.

Job Description Why Join Our Team? Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for the past 120 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world. What We Offer: • Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority., • Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level. U.S. Pipe is seeking a 1st shift Maintenance Mechanic to join our team. The Maintenance Mechanic is responsible for ensuring equipment/machinery is functioning properly and performing routine preventative maintenance of equipment system prioritizing work based on need. The Maintenance Mechanic will perform routine adjustments and calibrations to machinery and will follow up with a Production Technician on any diagnostics needed to perform a needed repair. Specific Responsibilities: • Receives instructions or participates in team decisions regarding scheduled and emergency repairs, installation, and inspection tasks., • Inspects plant equipment for defects such as misalignment, wear, insufficient lubrication, etc. and repairs such defects., • Dismantles, cleans, repairs, replaces, installs, maintains, assembles, adjusts, and lubricates all plant mechanical equipment and machinery., • Performs preventive maintenance tasks to maximize effectiveness of plant equipment., • Perform precision maintenance duties., • Fabricate and weld for projects, routine maintenance jobs, emergency jobs, etc., • Interpret blueprints, drawings, sketches, etc., • Makes and seals various types of joints such as expansion, flange, nipple, coupling, union, lead wiped, soldered, flared, caulked, banded, and welded. Installs gaskets, packing, and tests joints for leaks or tightness., • Tests, inspects, dismantles, repairs, replaces, or installs any type of high or low-pressure piping, tubing, fittings, fixtures and parts for the installation, maintenance and repair of pipelines for air, water, steam, oils, gases, acid, and caustics., • Ability to troubleshoot, repair, install, etc. hydraulic and pneumatic equipment., • Utilize a CMMS to obtain work orders, document information, close work orders, etc., • Keeps work area in a neat and orderly condition and performs all work in a safe and efficient manner., • Performs any other duties assigned by supervisor., • High School diploma or G.E.D. and minimum of 3 years of experience as an industrial millwright or maintenance mechanic and/or successful completion of an apprenticeship program or a vocational course of study related to industrial maintenance at a recognized vocational institution., • Requires interpersonal skills in dealing with coworkers, contractors and vendors, mechanical aptitude., • Strong mechanical aptitude., • Ability to read drawings, schematics, and blueprints., • Industrial manufacturing maintenance experience, • Strong interpersonal and communications skills and the ability to work effectively in a team environment with people of varying skills and backgrounds., • Must be able to speak both English and Spanish., • Must be a self-starter and have excellent troubleshooting skills., • Knowledge of safety policies and procedures (e.g., lock out/tag out) etc.

Job Description DEL-AIR Heating, Air Conditioning, Electrical, and Plumbing is the largest Residential HVAC Company in Central Florida. We are a rapidly growing industry leader with seven locations serving Central Florida - Clermont, Davenport, Tampa, Jacksonville, Melbourne, Sanford (headquarters), and Sarasota. Primary Responsibilities: Assist in repairing and maintaining heating and cooling equipment in residential settings. Specific Duties & Tasks: • Braze and solder various metals to connect piping, • Install, modify, or repair air ducts, indoor units, drain pans, drain lines, and outdoor units, • Install and calibrate thermostats, humidistats, solenoids, and timers, • Inspect inoperative indoor or outdoor units to locate causes of trouble, • Disassemble indoor or outdoor units, and replace or repairs defective parts, • Have the appropriate certifications (EPA), • Have a valid Florida driver's license, • Be able to pass a Drug Test, • Be able to pass an extensive background check, • Meet the age requirement of 18 years or older, • Outstanding communication and customer service skills, • Be able to work flexible hours including overtime as needed, • NATE certification is a plus, but not necessary, • Good Decision Making, • Self-motivated and Reliable, • Provide all your hand tools and power tools, • Positive Attitude, • Opportunities for career growth and advancement, • Competitive wages - Weekly pay, • Company Paid Life Insurance, • Company Paid Telehealth Program - MDLIVE, • Medical, Dental, and Vision Plans, • Supplemental Benefit Plans (Disability, Accident, Critical Illness, etc.), • Paid time off (PTO) / Paid holidays, • 401K Retirement Plan, • Corporate Wellness & Safety Programs, • Referral Incentives We are an Equal Opportunity Employer and a Military Friendly Employer

Job DescriptionDescription: Company Description: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and maintenance. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has close to 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: • Maintain and repair airframes and related components, including flight controls, hydraulics, fuel systems, and mechanical components., • Conduct the disassembly of aircraft by removing components, cleaning/inspecting and properly tagging parts for inventory. Essential Job Tasks: • Perform aircraft maintenance, inspections and repair in accordance with regulations, manufacturer instructions and company policies., • Applies technical knowledge of aircraft systems to effectively troubleshoot and determine system and equipment malfunctions., • Maintains records in compliance with FAA and Company standards., • Maintains premises of the shop facility in a clean and organized manner., • Maintains equipment and tools in serviceable and working condition., • Assist other employees in the performance of their job assignments through coaching, counseling and guidance., • Performs many other duties as assigned Knowledge, Skills and Abilities: • Knowledge of Gulfstream G-IV, 0Bombardier Global, Hawker 800/900XP, Cessna 560XL, Latitude and Longitude maintenance preferred., • Knowledge of aviation procedures/servicing/maintenance, • Adept in workplace safety best practices, • Understanding of applicable FARs, • Knowledge of computers and electronic software applications, • Ability to effectively manage multiple tasks and priorities, • Must possess excellent communication and interpersonal skills including the ability to read, write and speak English. (Bi-lingual in Spanish is a plus), • Ability to work well as part of a team Minimum Qualifications: • FAA Airframe and Powerplant License with a minimum of 1 year of experience., • Excellent computer skills., • Must pass airport security background checks and travel for work as required., • Must have good organizational skills and ability to manage multiple priorities., • Must be able to read and write English and have good communication, writing, and problem-solving skills., • Must be able to pass DOT required pre-employment drug test. Work Conditions & Physical Requirements: • FAR Part 145 aircraft maintenance in a hangar and ramp environment, • The employee must occasionally lift and/or move up to 50 pounds, • Good vision and depth perception, • Availability during nights, weekends, & holidays as needed Travel: • Minimal travel is required Required Education/Experience: • FAA A&P license required, • 3-5 years proven experience in a similar position, • High School diploma or GED, • Has no certificate action since the date of the interview, • Has no misdemeanors or felonies since the interview date LANGUAGE SKILLS • Ability to read, analyze, interpret and understand technical procedures and governmental regulations, sometimes quickly and under stressful or emergency situations., • Able to effectively present information to and respond to questions from management, dispatch, crew, air traffic control, and the general public., • Able to speak and be understood in English, including shouted verbal commands during emergency situations. REASONING/PROBLEM SOLVING ABILITY • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Capable of interpreting a variety of multiple instructions furnished in written, oral, diagram, or schedule form., • Must be able to remain calm, think and react quickly in all types of emergency situations. DECISION MAKING & IMPACT OF ERRORS • Makes decisions to support strategic direction., • Decisions tend to be medium range and of medium significance with moderate consequences, but may in unusual situations be significant and have safety-of-flight consequences., • Decisions could require additional expenditure of resources if not sound and may impact safety., • Able to process information quickly and react in a positive manner during unexpected and/or serious situations., • Capable of controlling personal and emotional responses and acting appropriately under high levels of stress. Direct Reports: • This role has no direct reports. Work Authorization: Must be authorized to work in the U.S. and be at least 21 years of age by 1/1/20. Is this correct? Compensation: • Pay based on experience, • Medical including Health, Dental and Vision, • Short-Term and Long-Term Disability Insurance, • Paid Holidays, • Paid Vacation, • 401K – After 6 Months of Service, • Profit Share Program Requirements:

Job Description BETTER MOBILITY FOR LIFE Savaria is a global leader in accessibility and patient care products, designing and building wheelchair lifts, stairlifts, elevators for home and commercial applications, medical beds, therapeutic surfaces, ceiling track lifts and patient slings. Savaria employs 2,450 valued associates globally and has 11+ manufacturing facilities to reach markets in North America, Europe, Australia, and Asia. SAVARIA PATIENT CARE Built from a heritage of brands including Span, Handicare and Silvalea, Savaria Patient Care provides products designed for safe patient handling and positive outcomes. Our research and clinically based product portfolio include therapeutic surfaces for pressure management and positioning, a complete range of innovative ceiling and floor lifts and slings. Savaria Patient Care is a division of Savaria Corporation, a global leader in accessibility. OVERVIEW: The Installation & Service Technician will be primarily involved with the installation, service and preventative maintenance of Handicare products throughout the U.S. This individual will be called upon to perform site surveys and installation audits. Whenever possible, the work performed by the individual would be billable against a particular revenue generating project. Occasionally, based on available service and installation workload, the technician may perform other duties as assigned in other areas of the business such as production, assembly and distribution. Candidates must have construction experience and live in the Orlando, FL area, within 25 - 30 miles radius. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Perform installation of Handicare products. This includes but is not limited to resource allocation, customer and sub-contractor communication, expense tracking, final audit, etc. Products include, but are not limited to: ceiling track lifting systems, etc. Construction sites consist of hospitals and long-term care facilities., • Install ceiling track lift systems and other products per Handicare standards., • Perform on site surveys at prospective installation sites for the purpose of gathering all required information to plan and complete a ceiling track lift installation., • Perform on site audits of in progress and completed installations to ensure compliance with company standards., • Coordinate delivery of products and other installation materials to coincide with arrival of labor resources as needed on a project., • Arrange site storage for products and materials as needed for installation projects., • Keep accurate project records for expenses, various required testing, training etc., • Interact directly with owners and staff at Hospitals, Nursing Homes, private residences, Group Homes, etc. while performing the above functions, • Train the end users of the equipment on the operational aspects of the equipment sold and installed., • Perform service repairs and scheduled preventative maintenance as required., • Maintain the company service and installation vehicle in good operating condition and cleanliness., • Maintain the van inventory in an orderly fashion, at proper levels and account for all items used in the performance of service and installation functions., • Travel to out of state job sites as directed by supervisor, travel required up to 80% of the time., • Additional responsibilities as requested or required by management. SUPERVISORY RESPONSIBILITIES: • Identifies and resolves problems in a timely manner, • Able to read and interpret written information, • Able to deal with frequent change, delays or unexpected events., • Is consistently at work and on time., • Follows instructions, responds to management direction, • Takes responsibility for own actions, • Commits to long hours of work when necessary to reach goals, • Works quickly, • Observes safety and security procedures, • Determines appropriate action beyond guidelines, • Reports potentially unsafe conditions, • OSHA 10 Hour Certification required; OSHA 30 Hour Certification preferred. The employee may frequently stand, walk, climb, stoop, kneel or crouch during shift. Employee will be required to regularly use hands to finger, handle, feel and reach with hands and arms. Employee must be able to regularly lift, push, pull and or move up to 50 lbs. TRAVEL: Savaria provides equal employment opportunities and consideration to all qualified employees and applicants, including disabled individuals and veterans. #savariapatientcare