Plant jobs in Irving, TexasCreate job alerts

Smurfit Westrock (NYSE:SW) is the go-to leader and partner of choice in sustainable packaging. We are dedicated to creating efficient and scalable paper and packaging solutions to help solve complex packaging challenges. Guided by our values of safety, loyalty, integrity and respect, we are committed to delivering meaningful value for shareholders, customers, employees and the communities where we operate. DESCRIPTION Primary duties include providing safe and timely electrical support, preventative maintenance, installation, service, repair, troubleshooting and resolution of multiple operating machines within a manufacturing industrial environment. Hourly rate starts at $31.83/HR. How you will impact Smurfit Westrock: • Perform routine and extensive preventative maintenance and repair procedures on electrical and mechanical systems involving production equipment and plant systems including PLCs., • Utilize electrical/mechanical skills to maintain machinery, • Contribute to a collaborative safety culture that drives results Performs duties as assigned, complies with all safety regulations, practices, and follows specific directions. • 2-3+ years of Electrical troubleshooting experience., • Operational knowledge of automated industrial machinery which includes motors, pumps, drives, relays, 3 phase power, communication devices, industrial/electronic controls and power transmission systems., • Understands hydraulic and pneumatic systems, • Ability to install and set up VFDs, • PLC trouble shooting and problem-solving ability with practical, mechanical & electrical aptitude., • Ability to bend conduit and pull electrical wire., • Able to read and interpret both electrical and mechanical drawings, • Working knowledge of encoders and various types of sensors, • Able to install and troubleshoot basic 3 phase motors & control circuits, • Knowledge of the various types of sensors and limit switches, • Ability to read schematics, prints, ladder diagrams, and drawings, • Performs other duties as assigned by the Electrical Supervisor or another member of the leadership team. Education/Experience • High school diploma or equivalent., • Military training and or technical school, • Training/certification in electrical technology/machine control fields, • Preferred 5 years in trouble shooting industrial electrical control systems down to component level, • Ability to work independently, • Ability to work flexible hours and overtime as required, • Standing for extended periods., • Awkward and/or repetitive movements., • Moving or lifting of equipment, materials, and tools up to 50lbs., • Work in buildings and areas of fluctuating temperature and weather., • Balancing, stooping, kneeling, crouching, or movement within confined areas., • Corporate culture based on integrity, respect, accountability, and excellence., • Comprehensive training with numerous learning and development opportunities., • Competitive benefits including medical, dental, vision, life insurances and 401k. Smurfit Westrock is an Equal Opportunity Employer. We strive to create and maintain a diverse workforce where everyone feels valued, respected, and included. WestRock does not discriminate on the basis of race, color, religion, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other basis protected by federal, state or local law. #SmurfitWestrockJobs Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment.

Supervisor - Maintenance (Regional)EULESS, Texas, United StatesMaintenance and TechniciansMar 24, 2026 Post Date2610001433 Requisition # Sunoco LP is a leading energy infrastructure and fuel distribution master limited partnership operating across 32 countries and territories in North America, the Greater Caribbean, and Europe. The Partnerships midstream operations include an extensive network of approximately 14,000 miles of pipeline and over 160 terminals. This critical infrastructure complements the Partnerships fuel distribution operations, which distribute over 15 billion gallons annually to approximately 11,000 Sunoco and partner-branded retail locations, as well as independent dealers and commercial customers. At Sunoco, we take great pride in what we do and wholeheartedly believe our employees drive success for our company and our customers. We are always looking for the best and brightest talent and we are committed to making your job a challenging and rewarding experience. Position Summary: The Regional Maintenance Supervisors, under the guidance of the Director of Reliability and reporting to the Regional Operations manager, will be responsible for the day-to-day facility maintenance activity for the facilities in the region for which they are assigned. Primary responsibility will be for the maintenance requirements of the primary Hub facilities in the region. • Qualified field technicians who perform day-to-day maintenance activities., • Coordinate Maintenance activities at assigned regional facilities as required, • Review existing and develop new maintenance tasks for regional technicians and / or Facility Managers., • Assist in developing facility level ODR maintenance tasks. (ODR Policy), • Assist facility managers in developing core 3rd party maintenance vendors., • Coordinate Regional Work Order process., • Assist assigned regional facilities in the prioritization and execution of active work orders., • Execute PM/PdM programs Assist with establishing a scheduled PM/PDM Calander, • Assist Specialist with development of Critical equipment / parts inventory., • Champion General AVO (Operator Rounds) process., • Evaluate 3rd party PM reports (i.e. Vapor system PM) and develop action plan to address findings., • Provide OJT opportunities for Operators to perform routine PM tasks, PdM tasks and Equipment wellness checks as part of the ODR program., • Assist with routine PdM tasks at assigned regional facilities. (i.e. Rotating Equipment Vibration readings), • Assist with highest level critical equipment PM inspections and repairs, • Manage compliance PM programs, • Update Benchmark compliance action items, • Participate in Equipment Failure investigations., • Perform Asset Risk Assessments (Follow equipment risk procedure):, • Determine the criticality and life cycle phase of facility equipment., • Perform Failure Analysis on critical equipment to determine options that lead to minimized risk of failure., • Develop Asset Failure Plans with facility managers., • Assist facility leadership in developing facility level maintenance budgets. To perform this job successfully, an individual must be able to perform each essential job functions satisfactorily. The requirements for this position, including, but not limited to, are listed below: CMMS software experience, SAP PM preferred Possess a general working knowledge of Microsoft Office suite. Effective time management and organizational skills Ability to work under pressure with changing priorities and minimal supervision. Possess analytical, problem-solving and decision-making skills. Excellent written and oral communication skills. Team Player with strong interpersonal skills. Can meet requirements of state and federal regulation governing vehicle operations. Possess a valid federally issued TWIC card. Ability to travel up to 10% of total work hours. Required Education / Experience: High School diploma or Bachelors degree or equivalent experience. 8 years related experience in the oil and gas industry. Preferred Qualifications: Experience with plant regulatory compliance or other schedule driven maintenance activities related to equipment and work order management. Project planning experience Directing efforts of 3rd party vendors and contractors. Equipment and parts inventory management Understanding of cost control and budgeting process 8+ years of refinery and/or fuel terminal operation and maintenance-based activities. Understanding of Planning/Scheduler roles and responsibilities. Working Conditions: Frequent exposure to heat, cold, and other adverse weather conditions Lifting up to 50 pounds. Repetitively standing, walking, bending, stretching, reaching over shoulder at height, climbing ladders and stairs over 25 ft. Working conditions sometimes include confined spaces. Subject to callouts to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays. Work in and around industrial/manufacturing settings, which may include exposure to various hazardous products, processes, energized equipment, materials and chemicals, as well as extreme temperatures conditions and loud machinery, and require appropriate personal protective equipment. Occasional overnight travel to regional facilities.

Job Description Are you looking to join one of the fastest growing Mexican food companies in the world? Here at MegaMex Foods, our purpose is to Reimagine Mexican Flavors. MegaMex was born in 2009; we have found our niche in bringing unique and traditional Mexican flavors to dinner and restaurant tables around the world. Opportunities are endless with our locations domestic and international including the Orange Office, Distribution Center in Saginaw, Manufacturing Plant in Dallas, and several plants in Mexico, Colombia, and Peru. At the core of who we are is Together – Juntos. Together, we bring the spirit of Mexico to every table. We value different backgrounds and work experiences as they provide new ideas and ways to Reimagine Mexican Flavors. We aim to drive a culture where everyone feels valued, respected, safe, and free to be themselves. We are Juntos! 2nd SHIFT Major Primary Duties: Performs specific preventative maintenance, mechanical and electrical repair, troubleshooting and other tasks to keep packaging, processing, and other facility equipment in optimal operational condition • Responsible for maintaining logs & documentation on operating conditions, performance & problems, • Communicates, identifies and solves problems by working with other team members and departments, • Must comply with all Company safety rules, along with GMP’s and USDA regulations, • Ensures the safe and appropriate operation of equipment by proper diagnosis, repair and maintenance of the plumbing, electrical, and HVAC systems, • Assists in performing work on production/processing machinery and other mechanical equipment and buildings, • Duties include repairing and maintaining machinery, mechanical equipment and computerized systems, such as pumps, conveyor systems, and motors, in accordance with diagrams, blueprints, operating manuals, or manufacturer’s specifications, • Confers with operators and observes, tests, and evaluates operation of machinery and equipment to diagnose cause of malfunction., • Daily chemical testing and logging all test results, making adjustments required to maintain refrigeration & Utility system within established limits., • Safe and efficient operation of refrigeration, steam generation and all utility systems, • Welds to repair broken metal parts and assemble new equipment, • Works on PLC controls, VFD drives and demonstrates a good understanding of instrumentation, • High School Diploma or Equivalent GED, • Industrial Maintenance certification preferred, • Must be able to work in a team environment or individually, following all Process Safety Management (PSM), as well as all company policies and regulations, • Maintains paperwork for PM’s scheduled in house audits and annual inspections

Job Description IMMEDIATE job opportunity for a driven individual who has a proven track record of performance and desire to work for a well-established organization. We are looking for an experienced MAINTENANCE TECHNICIAN for a grower, packer, and distributor of premium avocados with strategically placed distribution centers and sourcing regions located in Dallas, TX. Primary Duties & Responsibilities • Install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform and test machinery features., • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production, packing machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test and proceed on planning for general maintenance., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions as needed. Education & Experience • High School Diploma or GED - Minimum 3 Years Industrial Maintenance Experience - Electrical Experience, preferred - Welding Experience, a plus Skills • Attention to Detail, Bilingual is a plus, but not required, Excellent verbal communication skills, Problem-solving skills, Ability to troubleshoot, Ability to follow instructions License/Certifications - HVAC and Electrical Certifications, a plus Compensation: $21 - 23/HR. If qualified and interested in the position, please email your resume relating your skills, background, and experience to the job opening. CitiStaff 1111 W. Town & Country Rd Ste 29, Orange, CA 92868 Our client is looking to hire the right candidate as soon as possible, time is of the essence. Company DescriptionCitiStaff Solutions, Inc.CitiStaff Solutions, Inc.

Job Description Are you looking to join one of the fastest growing Mexican food companies in the world? Here at MegaMex Foods, our purpose is to Reimagine Mexican Flavors. MegaMex was born in 2009; we have found our niche in bringing unique and traditional Mexican flavors to dinner and restaurant tables around the world. Opportunities are endless with our locations domestic and international including the Orange Office, Distribution Center in Saginaw, Manufacturing Plant in Dallas, and several plants in Mexico, Colombia, and Peru. At the core of who we are is Together – Juntos. Together, we bring the spirit of Mexico to every table. We value different backgrounds and work experiences as they provide new ideas and ways to Reimagine Mexican Flavors. We aim to drive a culture where everyone feels valued, respected, safe, and free to be themselves. We are Juntos! 3rd Shift Major Primary Duties: Performs specific preventative maintenance, mechanical and electrical repair, troubleshooting and other tasks to keep packaging, processing, and other facility equipment in optimal operational condition • Responsible for maintaining logs & documentation on operating conditions, performance & problems, • Communicates, identifies and solves problems by working with other team members and departments, • Must comply with all Company safety rules, along with GMP’s and USDA regulations, • Ensures the safe and appropriate operation of equipment by proper diagnosis, repair and maintenance of the plumbing, electrical, and HVAC systems, • Assists in performing work on production/processing machinery and other mechanical equipment and buildings, • Duties include repairing and maintaining machinery, mechanical equipment and computerized systems, such as pumps, conveyor systems, and motors, in accordance with diagrams, blueprints, operating manuals, or manufacturer’s specifications, • Confers with operators and observes, tests, and evaluates operation of machinery and equipment to diagnose cause of malfunction., • Daily chemical testing and logging all test results, making adjustments required to maintain refrigeration & Utility system within established limits., • Safe and efficient operation of refrigeration, steam generation and all utility systems, • Welds to repair broken metal parts and assemble new equipment, • Works on PLC controls, VFD drives and demonstrates a good understanding of instrumentation, • High School Diploma or Equivalent GED, • Industrial Maintenance certification preferred, • Must be able to work in a team environment or individually, following all Process Safety Management (PSM), as well as all company policies and regulations, • Maintains paperwork for PM’s scheduled in house audits and annual inspections

Job Description We are seeking a hardworking, versatile Irrigation Technician and Landscape Installer to join our growing team. This role is a hybrid position responsible for both the technical maintenance/repair of irrigation systems and hands-on installation of new landscapes. The ideal candidate has strong mechanical skills, experience with PVC irrigation systems, and the ability to work on landscape installation crews (planting, hardscaping, turf installation). What You’ll Do (Responsibilities) Irrigation Maintenance & Repair: Troubleshoot, diagnose, and repair irrigation issues, including broken heads, leaks, valve repairs, wire tracing, and controller adjustments. Irrigation Installation: Lay out and install new, water-efficient sprinkler systems, including digging, piping, and wiring. Landscape Installation: Assist with planting trees, shrubs, and flowers; laying sod; and performing minor hardscape installation (pavers, edging). Equipment Operation: Safely operate trenchers, skid steers, and other landscaping equipment. Client Service: Interact professionally with clients, explaining repairs needed and providing updates. Vehicle & Shop Safety: Complete daily pre-trip inspections of vehicles, trailers, and equipment, keeping them clean and organized. What We’re Looking For (Qualifications) Experience: 2+ years of experience in commercial or residential irrigation repair and installation. Experience in general landscaping installation is required. Licensing: [Optional: Valid State of Texas Licensed Irrigation Technician License]. Skills: Knowledge of irrigation components, PVC, and wiring, as well as plant material and installation techniques. Physical Stamina: Ability to work outdoors in all weather conditions, lift 50+ lbs, and bend/stand for long periods. Driver License: Valid Driver’s License with a clean driving record. Communication: Strong English skills (Bilingual in Spanish is a plus). Company DescriptionDesign, Build Maintenance firm that has been in business over 40 years, looking to grow and expand. We take pride in our work and our team, offering our clients high quality detailed installations they enjoy for years.Design, Build Maintenance firm that has been in business over 40 years, looking to grow and expand. We take pride in our work and our team, offering our clients high quality detailed installations they enjoy for years.

Job DescriptionLocation: Fort Worth RMX TX Job Req ID: 14721 Join our amazing team and contribute as a: Plant Maintenance Technician ABOUT THE ROLE Amrize is hiring a full-time Ready Mix Plant Maintenance Technician for the DFW Ready Mix Plants. WHAT YOU'LL ACCOMPLISH • Maintains, inspects, repairs, moves, and/or installs plant machinery and equipment in accordance with instructions, equipment manuals, etc. May perform maintenance on plant buildings as well; Assures compliance with environmental and safety regulations., • Schedules and performs preventative maintenance on plant equipment such as crushers, conveyor belts, pulleys, pumps, screens, and screen bearings by following the manufacturer's recommended service intervals and internal equipment reliability experience., • Inspection of condition and operation of plant equipment and perform necessary repairs and adjustments., • Move and install plants following engineering plans and specifications; guide less experienced mechanics., • Disassembles and repairs production equipment by replacing worn or broken parts, including bearings, rollers, motors, controls, etc., • Performs maintenance on building and other related work as assigned., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors., • Other duties as assigned. WHAT WE'RE LOOKING FOR • High school diploma or equivalent, • 2-3 years of specialized training in technical school, apprenticeship, or manufacturers' training program, • 3-4 years experience in mechanical repair, installation, and construction in a plant or industrial environment, • Must have a working knowledge of basic electrical, mechanical, hydraulic, and pneumatic systems as well as the use of all shop equipment, such as welding and machining equipment Additional Requirements: • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description Quality Ironworks, a fast-growing steel fabricator, has an immediate opening for an Entry Level Maintenance Tech, at our Dallas, TX location This candidate must be able to work on heavy industrial machinery. Experience with motors, pneumatic tools, hydraulic systems, single phase and three phase electricity, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. This experience is a plus but not required. This is a hands-on position that requires you to be out in the plant working on industrial machinery. Requirements: • Exposure/Interest in the areas of mechanics, pneumatics, hydraulics and electrical, • Interest in developing skills in industrial maintenance, industrial technology, mechanical drawing, math, computer programming, electronics, or another related field, • Critical thinking and problem-solving ability, • Should possess strong manual dexterity As a member of the team, you can expect: • Complete benefits package – Including health, dental and vision insurance, • 9 paid holidays, • Paid Vacation after 1 year of employment, • Opportunity for Advancement – many of our managers were promoted from within!, • Team environment – Enjoy working with a supportive group of employees that look out for one another., • Job stability – You can feel secure in your job because of the company’s agenda of predetermined projects. Note: No recruiter phone calls or agency inquiries please.

Job Description Who We Are At West Pak, being a family owned and operated company means, among other things, respect, integrity, support, and commitment to excellence. Our dedication starts with how we respect the land and the people who work it and carries over into the way in which we conduct all business. This same thoughtful care goes into how we handle our precious cargo. Our avocados are harvested at exactly the right time, packed to perfection, and delivered fresh for enjoyment worldwide. Primary Duties & Responsibilities • Install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Perform and test machinery features., • Perform mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting and repair of production, packing machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test and proceed on planning for general maintenance., • Perform regular preventive maintenance on machines, equipment and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions as needed., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • High School Diploma or GED, • Minimum 3 Years Industrial Maintenance Experience, • Electrical Experience, preferred, • Attention to Detail, • Bilingual is a plus, but not required, • Excellent verbal communication skills, • Problem-solving skills, • Ability to troubleshoot The base pay we reasonably expect to pay for this role is: $21.00/hour to $23.00/hour. The actual pay for this role will be determined by a variety of factors, including but not limited to the candidate’s skills and experience. Please note that base pay is one important aspect of a compelling Total Rewards package. The base pay range indicated here does not include any additional benefits or cash bonuses that you may be eligible for based on your role and/or employment type. Physical Requirements/Working Conditions The essential functions of this job require frequent standing, walking, and upper body movements. Specific vision acuity required by this job include close vision, the ability to adjust focus, and color vision when cleaning products. Physical demands include bending, stooping, reaching above and below shoulder level. Lifting and carrying are also essential. The employee will also be in contact with chemical products and machinery. Additionally, the incumbent will work near moving mechanical parts, stacks, pallets and may be exposed in high places and surfaces. There is moderate noise in the work environment. The incumbent for this position may be on call for emergencies according to the business needs, only when required. The noise level is frequently quiet or moderately quiet, at or below 70 decibels and in the product plant areas noise levels can exceed 80 decibels when machinery is operating. The incumbent may be exposed to situations in which occasional lifting may be involved (up to 50 lbs.), with or without assistance. There will be exposure to situations of working in a hot or cold environment from 38°ree;F-60°ree;F and will frequently be exposed to hot or wet (humid) locations. Privacy Notice: By applying, you consent to West Pak Avocado, Inc. collecting and processing your personal data for recruitment purposes, including evaluating your application and communicating with you. We handle your data securely and in compliance with applicable laws including CCPA (for California applicants). For questions or to learn more, please contact us. Day Shift, 7am-4pm, Monday through Friday. Flexibility to work O/T and weekends.

Job DescriptionWe're seeking a Mechanical Apprentice who's ready to put your skills to work on projects that matter - and build a career with a company that's building North America. Job Title: Mechanical Apprentice | Req ID: 16729 | HR Contact: Daneik Fowler| Location: Lewisville RMX TX ABOUT THE ROLE Amrize is seeking to hire a full-time Mechanic Apprentice to join our team at the Lewisville, TX location. WHAT YOU'LL ACCOMPLISH • Maintains, inspects, repairs, moves, and/or installs plant machinery and equipment in accordance with instructions, equipment manuals, etc., • Completes work orders in a timely manner by installing, repairing and fabricating materials out of metal., • Conducts routine inspections of plant and mobile equipment and report findings to Area Manager., • Assists personnel as may be required for the purposes of supporting them in the completion of their activities., • Maintains shop, equipment, tools, vehicles, etc. for the purpose of ensuring the availability and functioning of required items and ensuring safety., • Diagnosing and troubleshooting equipment failures., • Assures compliance with environmental and safety regulations., • Inspection of condition and operation of plant equipment and perform necessary repairs and adjustments., • Disassembles and repairs production equipment by replacing worn or broken parts, including bearings, rollers, motors, controls, etc., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors., • Other duties as assigned. WHAT WE'RE LOOKING FOR • High school diploma or equivalent., • Specialized training in trade school, technical school, apprenticeships, or manufacturers' training program., • Have basic computer proficiency and good verbal and written communication skills., • Can work in a team atmosphere and learn new tasks., • Must be able to work unsupervised., • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Additional Requirements: • Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

Job Description Now Hiring: Industrial Maintenance Technician Advanced Troubleshooting | Preventive Maintenance | Production Equipment We are seeking a highly skilled Industrial Maintenance Technician with strong mechanical and electrical experience to support production operations in a high-volume manufacturing environment. This role requires hands-on expertise in diagnosing, repairing, and maintaining complex equipment systems to minimize downtime and ensure operational efficiency. ⚙️ Key Responsibilities • Perform installation, maintenance, and repair of production and facility equipment, • Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems, • Execute preventive maintenance (PM) programs and scheduled service tasks, • Diagnose equipment failures using meters, gauges, and diagnostic tools, • Read and interpret blueprints, schematics, and technical manuals, • Repair or replace components such as motors, sensors, conveyors, gearboxes, valves, and control systems, • Perform emergency repairs to minimize production downtime, • Support continuous improvement initiatives and equipment reliability efforts, • Conduct basic fabrication, welding, plumbing, and carpentry as needed, • Ensure compliance with OSHA safety standards, LOTO procedures, and plant protocols, • Document maintenance activities, repairs, and parts usage Required Qualifications • High School Diploma or GED, • Minimum 3+ years of industrial maintenance experience in a manufacturing or production environment, • Strong knowledge of electrical systems (480V, motors, controls, PLC basics preferred), • Experience with hydraulics, pneumatics, and mechanical drive systems, • Ability to troubleshoot using multimeters and diagnostic equipment, • Ability to read and understand technical diagrams and schematics ➕ Preferred Qualifications • Electrical certifications, • HVAC certification, • Welding and fabrication experience, • Experience working in food production or packaging environments, • Bilingual (English/Spanish) Physical & Work Conditions • Frequent standing, walking, bending, and reaching, • Ability to lift up to 50 lbs (with or without assistance), • Exposure to moving mechanical parts and production equipment, • Work in temperature-controlled and variable environments (38°ree;F–60°ree;F), • Exposure to moderate to high noise levels (up to 80+ dB in production areas), • Availability for on-call maintenance support as needed How to Apply If you are interested, please apply at and call 214-634-7686 ask for Jessica to set an appointment. Company DescriptionWe are the largest privately owned and operated staffing company in the state of Texas and have expanded into AZ. We have been in business for over 30 years and specialize in light industrial staffing and take pride in setting ourselves a part from the pack by offering a local feel with a national delivery, incorporating a personal face to face customer service model.We are the largest privately owned and operated staffing company in the state of Texas and have expanded into AZ. We have been in business for over 30 years and specialize in light industrial staffing and take pride in setting ourselves a part from the pack by offering a local feel with a national delivery, incorporating a personal face to face customer service model.

Job Description Prism is hiring for multiple Entry Level Technician through Sr Technician (experience in a high-tech manufacturing plant) positions. Prism’s Manufacturing Response Technicians provide support to two of North Texas’s largest technology manufacturing sites in both Dallas and Richardson. Manufacturing Response Technicians provide support during the manufacturing process to include material handling, decontamination of process equipment, atmospheric monitoring, emergency spill response and equipment realignment. The Team works together to provide “as needed” support to our client in their state-of-the-art facility. The work is fast paced, time critical and detail oriented and provides an opportunity to gain advanced training and experience as you transition into the manufacturing support role. Job Purpose Provide hazardous materials and decontamination services in the semi-conductor industry. Our work is a specialized service that we provide to our clients to help them meet their manufacturing QC/QA goals. We will train you, the work involves specific directions, that you wear appropriate personal protective equipment (PPE), and follow all safety procedures. Training, Tools, PPE & Uniforms are provided to you. This is an opportunity for you to join a growing company that provides cutting edge services to a Global leader in micro-chip production. Essential Functions • Must be willing to learn to work with hand tools and powered tools safely, lifting devices & material movers safely and withing in the client’s guidelines., • The work at times will involve working from heights, working in confined spaces, working within strict guidelines., • Adherence to safety processes relative to manufacturing., • Strong oral and written communication skills., • Customer/client focus., • Stress management/composure., • Teamwork orientation. Work Environment Provide manufacturing support, hazardous materials handling and decontamination services in the semi-conductor industry involving chemicals, gases, industrial waste, asbestos, lead, and mold. You may be offered opportunities for advanced company paid training to include client required advanced trainings, State of TX asbestos worker certification, State of Texas mold worker certification, other State of Texas Environmental certifications. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The incumbent occasionally lifts heavy objects, walks, and stands for extended periods of time and performs strenuous physical labor. Our Team Members lift, push, pull, & carry tools & parts; use abdominal and lower back muscles to provide support during their daily routine. The position requires good manual dexterity (hand, hand with arm, two hands) and multi-limb coordination. The position requires the ability to quickly reposition yourself in tight spaces within the manufacturing space. Position Type / Expected Hours of Work This is a full-time position. This position occasionally involves overtime hours, holiday work and weekend work which is compensated at overtime pay. Travel n/a Required Education and Experience • 40-hour HAZWOPER a plus., • Must be able to pass a client required background check., • Must be able to complete a client required physical., • High School education, GED or equivalent., • Speaking and reading English is a client safety requirement of this position. Additional Eligibility Qualifications • Must possess or obtain a valid State of Texas issued identification card or drivers license before employment., • Bilingual (Spanish/English) is a plus Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. E-Verify Please note that we participate in the Federal Employment Verification Program (E-Verify). Your employment will be contingent upon confirmation of your employment eligibility through the E-Verify Program. To confirm employment eligibility, please review the complete list of acceptable identification documents at . If you are extended an employment offer, you must have it available during the onboarding process. The same documents used to complete E-Verify will also need to be shown to your supervisor on the first day of orientation. Additional Information Alloy provides an excellent work environment, strong and competitive benefits, outstanding educational opportunities, and a solid career path for the employee that excels. Alloy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, color, national origin, race, religion, sex, sexual orientation, gender identity, protected veteran status, or disability status. Benefits • Medical, dental, vision, life insurance., • Advancement opportunity., • Paid vacation accrued after 30 days of employment,, • Paid holidays based on client’s workload., • 401K Participation, • Advanced environmental training, • 90-day review; performance based hourly wage increase. Key Words Chemical technician Hazmat Hazwoper HMT HMS Hazardous material technician Hazardous material specialist Decon technician Decontamination technician Equipment Technician Field technician Industrial technician Inspection technicians Maintenance technician Maintenance Response Technician Plant technician ERT Emergency Response Technician ERS Emergency Response Service RT Response Technician Abatement Technician ACM Technician Industrial, Semiconductor, Factory, Warehouse, Plant, Manufacturing 8 hour shift, day shift, Monday-Friday, On call, Overtime, Weekends as needed 40 hours per week, occasional overtime

Job Description At Niagara, we’re looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: * Work in an entrepreneurial and dynamic environment with a chance to make an impact. * Develop lasting relationships with great people. * Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. **Essential Functions ** * Adhere to and enforce highest standards in safety and good manufacturing practices plant-wide * Train and lead Operators, Mechanics and Supervisors on technical procedures related to high-speed bottle manufacturing and packaging * Work directly with plant leadership to develop and execute projects involving continuous improvement, upgrades, and the resolution of re-occurring problems * Rapid identification of machine problems to minimize equipment downtime with root cause analysis conducted to prevent re-occurrence * Partner with other Sr. Maintenance Technician to resolve cross-functional problems * Use of available software systems to analyze and identify issues to drive throughput performance * Define requirements and lead overhaul efforts to rebuild equipment to like-new status during planned downtime * Transfer knowledge to Niagara team members to develop operating and troubleshooting procedures in the following areas of bottling production specialization:- Blow molding, inclusive of PET processing, machine set-up, mold changes, and quality inspection systems • Filling/capping, beverage processing methods, cap feeding systems with light closures, vision inspections systems and laser date coders, quality/sanitation standards, and conveying systems, • Labeling technology, roll-fed and/or cut and stack, machine set-up, hot melt gluing systems, and conveying systems, • Dry-end packaging including case packers, case conveyors, conventional and robotic palletizers, and stretch wrappers. Machine set-up required for all pack size changes, • Common OEM’s for production equipment: Krones, Sidel, KHS, Sacmi, Tech Long Transfer knowledge to Niagara team members to develop operating and troubleshooting procedures in the following areas of injection technology:- Husky injection molding machines consisting of hydraulic, pneumatic, and electromechanical systems • Auxiliary systems including resin handling/blending, resin drying, dehumidification, vision inspection, conveying, and cooling systems, • Mold systems, internal hot runner and cold half maintenance, identification of component wear and troubleshooting through detailed inspection of produced products, • Plastic processing at high speeds while maintaining tight part tolerances and acceptable levels of acetaldehyde (AA) Create SOP’s for troubleshooting machines, and upload them to BDA system * Regular and predictable attendance, as well as required on-call availability, are essential functions of the job to ensure equipment and facility up-time. * Ability to stand or walk for extended periods of time in a manufacturing environment. * Ability to lift up to 50 lbs. * Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without prior notice. **Qualifications ** *experience may include a combination of work experience and education * Minimum Qualifications:- 6 Years – Experience in an electrical maintenance environment • 6 Years – Experience in a similar position, • Effective communication of issues and solutions to cross-functional team members, • Ability to read and interpret schematics: electrical and instrumentation diagrams, • Familiarity with all basic hand tools, multi-meter and PLC Hardware (I/O modules, communication modules, CPUs and safety relays), • Knowledgeable on RSLogix 5000, SIMATIC Step 7 and Factory Talk Studio, • Willingness to be a technical leader and trainer within the automation and electrical area of the plant or machine center, • Skilled in the repair of variable frequency drives, servomotors and controllers, communication systems (asi-bus, can-bus, profi- bus, ethernet), PLC input/output cards, and safety modules, • Demonstrated ability to communicate effectively and resolve issues across multiple departments and levels of the organization, • Experience with Microsoft Word, Excel, and Outlook, • Will need own toolbox and basic tools Preferred Qualifications:- 10+ Years– Experience in an electrical maintenance environment * 10+ Years – Experience working in a similar position * 6 Years – Experience managing people/projects * 4 years of experience in troubleshooting one of the following operating systems: Allen Bradley (AB), B&R or Siemens * 4 years of experience in an electro-mechanical role with Krones, Husky, Sidel, or other packaging or bottling equipment * 1 year of experience leading and developing others on the functionality and repair of * electro-mechanical equipment * 2 years of experience creating process improvements or continuous improvement initiatives * Skilled in layout and installation of electrical and communication lines * Skilled working with electrical systems including 480VAC & 24VDC power * Ability to read and interpret schematics: process and instrumentation diagrams * Proficiency in troubleshooting one or more of the following automation systems: Allen * Bradley (AB), B&R, and/or Siemens * Working experience with RSLogix 5000, SIMATIC Step 7, and Factory Talk Studio * Understanding of binary numbers and computer infrastructure * Knowledge of COPA-Data Zenon, SEW Motion Studios, and/or B&R Automation Studios **Education ** * Minimum Required: * High School Diploma or GED * Preferred: * Associate's Degree in manufacturing, manufacturing technology, mechatronics, industrial manufacturing, manufacturing automation or other similar manufacturing-related specialization Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: *Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time * Paid parental and caregiver leaves * Medical, including virtual care options * Dental * Vision * 401(k) with company match * Health Savings Account with company match * Flexible Spending Accounts * Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members * Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements * Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan * Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. * Tuition reimbursement, college savings plan and scholarship opportunities * And more! [ ]() Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees. **Niagara Plant Name DALLAS 2**

Upchurch is a rapidly growing, full-service building engineering company providing mechanical, plumbing, HVAC, and electrical services across the southeastern United States. Founded in 1970 and headquartered in Horn Lake, MS, Upchurch has grown through both organic expansion and strategic acquisitions, establishing a strong reputation for quality, reliability, and service excellence. We offer end-to-end solutions—from design and installation to ongoing maintenance and emergency support—helping clients maximize building performance, energy efficiency, and equipment lifespan. Position Summary We’re seeking an experienced Commercial Plumbing Service Technician to join our service team. The ideal candidate will have a strong background in commercial plumbing systems including backflow prevention, boilers (water and low-pressure steam), pump skids, hydro-jetting, and sewer services. The ideal candidate should be able to handle maintenance, emergency service calls, and contract work in large buildings. Key Responsibilities * Troubleshoot, maintain, repair and replace plumbing systems in commercial and institutional facilities including domestic water, sanitary and storm drainage, process piping, and specialty systems. * Perform preventive maintenance and corrective repairs on commercial boiler systems (both hot water and low-pressure steam), including controls, burners, gauges, valves, condensate return, blowdown and safety devices. * Service, troubleshoot and maintain pump skid systems used in water-boosting, heating/cooling loops, pressure maintenance, and fire/water systems. * Test, repair and certify backflow prevention assemblies and devices, maintaining compliance with municipal requirements. * Conduct hydro-jetting of drain and sewer lines, perform drain cleaning, and operate sewer inspection equipment to identify blockages, structural issues, or system defects. * Read and interpret blueprints, piping schematics, equipment submittals and preventive maintenance manuals; estimate labor, materials and time required for service calls and contract work. * Document all work including service logs, inspection sheets, compliance forms, and customer communication. * Maintain truck inventory, tools, and vehicle in a clean, professional condition. * Respond to emergency service calls on a rotating on-call basis, diagnosing problems quickly, coordinating with other trades when needed, and minimizing client downtime. * Ensure all work is performed in compliance with applicable codes and meet company safety & quality standards. Experience & Qualifications * Minimum 5 years of experience in commercial plumbing service for large-scale facilities (office towers, hospitals, schools, industrial plants). * Proven experience with commercial boiler systems including hot-water heating boilers and low-pressure steam boilers: routine and emergency maintenance, burner controls, pressure/temperature safety devices, condensate return, water treatment, and blow-down procedures. Knowledge of low-pressure steam practices as defined under regulatory codes is required. * Solid experience with pump skid systems: preferably including vertical-multistage, booster, or packaged skid units, with ability to understand pump curves, variable-frequency drives (VFDs), pressure/flow monitoring, isolating and servicing components. * Experience testing, repairing and certifying backflow prevention assemblies within commercial systems, with knowledge of local municipal test requirements and compliance. * Experience in sewer and drain service: hydro-jetting large sanitary/storm mains, performing clean-outs in commercial buildings, utilizing sewer-inspection cameras to locate blockages, structural defects or infiltration issues. * Ability to read and interpret blueprints, drawings, specifications, and to perform pipe layout, install and assemble piping, tubes, valves, fixtures, or specialty plumbing equipment. * Valid plumbing license issued by TSBPE (journeyman or master) * Valid driver’s license with a clean driving record. * Strong mechanical aptitude, excellent troubleshooting skills, ability to work independently or as part of a team, good communication with clients and internal staff, professionalism in appearance and customer interaction. * Physical ability to perform job requirements: lifting 50 lbs. frequently, working in confined spaces, climbing ladders, scaffolding, or man lifts as required. Preferred / Bonus Skills * Certification as a Backflow Prevention Assembly Tester (BPAT) or equivalent. * Experience with large mechanical chilled-water/hot-water loops or central plant systems. * Familiarity with computerized maintenance management systems (CMMS), mobile tablet-based documentation and service reporting. * Experience working on multi-trade projects (coordinating with HVAC, electrical, mechanical). Benefits: * Competitive salary based on experience. * Health, dental, and vision insurance. * Paid time off and holiday pay. * Opportunities for professional development and certification assistance. Equal Employment Opportunity: Upchurch Companies provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Allied Stone is a leader in fabrication and installation of natural stone, Allied Stone specializes in unique and customized granite kitchen countertops and bathroom vanities for new homes and remodels. We take pride in crafting our exceptional designs from only the highest quality natural stone such as granite, marble, onyx, and soapstone. We take great pride in our collaborative team environment. As a company, we emphasize building upon a strong foundation where our people can continually develop and make a difference. At Allied Stone, we know employees elevate our company with their ingenuity, charisma, and honest work ethic. When our employees are passionate about their craft it shows in their work by inspiring opportunities and strengthening customer relationships. We are Allied Stone strong and Allied Stone proud. Allied Stone Inc. is an industry leader in the field of natural and engineered stone fabrication. In business for over 20 years, Allied Stone Inc. is synonymous with superior quality and service, and an innovator in its field. The company specializes in importation of granite, marble, engineered stones and porcelain and transforming the product into elegant works and creations by fully utilizing an advanced fabrication facility in 5 different locations. These facilities are equipped with state-of-the-art CNC machinery and Tooling. Allied Stone Inc. serves the residential market (home builder’s, kitchen and bath dealers, retail and contractors). Allied Stone is hiring for multiple positions at our fabrication plant in Dallas on Crown Rd #LI-DNI

Job Description OVERVIEW: The Cycle Counter is responsible for the day-to-day warehouse inventory monitoring to ensure that inventory counts are current and accurate. The Cycle Counter is also expected to have mechanical knowledge and skills to operate a lift truck in a safe and professional manner under all conditions. When utilizing the Lift Trucks, the person in this role is expected to maneuver the forklift at a reasonable and prudent speed, looking closely for pedestrians or other motorized vehicles as well as fine manipulation with a respect to the preservation of product, building structure and property This position places a strong significance on effective teamwork, clear communication, sound judgment, safety orientation, achieving and maintaining production efficiency and dedication to the quality of our product. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Maintain PIT certification, • Observes all Safety Rules and is responsible for maintaining a clean and safe work area., • Performs duties of general help and job assignments as required. All Live Comfortably associates play a crucial role in meeting our customer requirements and are expected after initial training to perform with minimal supervision. Associates may be asked to assist with other duties and work in other departments when needed to meet those requirements. CYCLE COUNTER DUTIES Inventory • Correct locations based on cycle counts, • Investigate and find missing stock Cycle Count • Investigation of issues that arise through the cycle count process, • Ensure materials are in proper locations. Conducts searches in order to locate misclassified inventory, • Open cartons, bundles, and other containers to count items and/or weigh materials to determine quantity on hand. Weigh and mark product displaying remaining product left, • Determine causes of mismatched inventory counts, • Report discrepancies of over/under amounts and any damaged products to team lead/supervisor/manager as required., • Adhere to all Company safety policies, procedures, and best practices, • Perform other duties as required REQUIREMENTS, SKILLS & QUALIFICATIONS • 1-3 years’ experience in same or similar industry preferred., • Ability to work independently with minimal supervision, • Ability to communicate effectively verbally and in writing and follow directions Experience and Proficiency in Competencies necessary to be successful in role: • Effective Communication and Interpersonal Skills, • Strong teamwork with ability to Establish and Maintain Relationships in a professional manner, • Strong problem solving and organizational skills, • Exhibits a high Sense of Urgency and works well under pressure, • Possess a Positive Manner and Approach, • Practices Sound Judgement, • Adaptable and Flexible, • High level of Reliability to include maintaining good attendance, • Strong Safety Orientation Disclaimer: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All associates may be required to perform duties outside of their normal responsibilities from time to time, as needed. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate spends most of time standing. Also required to walk; use hands to finger, handle, or feel; reach with hands and arms and maneuver around production equipment throughout the shift. The Associate is occasionally required to balance., stoop and bends regularly to move/lift material or equipment (typically less than 50 lbs). The ability to communicate and specific vision abilities required for this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust and focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing / Production Floor: While performing the duties of this job, the Associate is frequently exposed to moving mechanical parts. The noise level in the work environment is usually moderate however there may be areas designated as Hearing Protection required and provided earplugs are mandatory in those areas. Not all areas of the plant and warehouse are climate controlled and exposure to heat and/or cold can occur. The Associate is frequently exposed to dust and floating particles used in the manufacturing, storage and inventory of raw materials and finished goods. Safety Statement: It is the policy of this company to ensure a safe, healthy workplace for all its associates. All associates are expected and encouraged to participate in safety and health program activities including the following: reporting hazards, unsafe work practices and accidents immediately to their supervisors or a safety committee representative; wearing required personal protective equipment; and participating in and supporting safety committee activities. EEO/Vet Disabled: Live Comfortably is a drug free workplace and an equal opportunity employer. Live Comfortably is committed to providing equal employment opportunity in all employment practices, including but not limited to, selection, hiring, promotion, transfer, and compensation to all qualified applicants and associates without regard to age, race, color, national origin, sex, pregnancy, sexual orientation, gender identity, religion, handicap or disability, genetics, citizenship status, service member or veteran status, or any other category protected by federal, state, or local law.

Job Description Plant Manager (Site Manager) Location: Grand Prairie, TX Company: Qual Pac (A Pro Pac Company) Client Site: Frito-Lay Dedicated Facility About Us Quality Packaging (Qual Pac) has been in business for over 50 years, built on a culture that values integrity, accountability, and people. We believe our employees are our greatest asset, we stand by our word, and we prioritize our customers above all else. Position Overview The Plant Manager is responsible for the overall leadership and performance of the facility, with a primary focus on Safety, Quality, and Production. This role drives operational excellence, ensures customer satisfaction, and builds a culture of continuous improvement and accountability. Reporting to the General Manager, the Plant Manager leads a team of direct reports responsible for managing all day-to-day operations within a fast-paced, customer-dedicated environment. Key Responsibilities Operations Leadership • Lead all aspects of plant operations to achieve performance goals in safety, quality, and production, • Oversee daily operations across multiple shifts in a high-volume environment, • Own and enforce all safety, food safety, and quality programs (OSHA, SQF, AIB, etc.), • Ensure compliance with all regulatory and customer requirements, • Lead, coach, and develop a team of managers and supervisors, • Oversee a workforce of ~300 employees, including full-time and temporary staff, • Build a high-performance culture focused on accountability, engagement, and continuous improvement, • Serve as the primary point of contact for the customer (Frito-Lay), • Communicate performance metrics related to quality, service, and production, • Champion Lean and Six Sigma initiatives to improve efficiency, reduce waste, and increase throughput, • Drive root cause analysis and corrective actions for operational issues, • Manage facility performance to meet budget and cost targets, • Optimize labor utilization, including temporary workforce planning, • Oversee systems including WMS, quality systems, and maintenance programs, • Ensure effective use and maintenance of all facility assetsQualifications, • 7–10+ years of experience in a manufacturing leadership role, • Proven success managing large, multi-shift operations, • Strong background in safety, quality, and production management, • Experience with continuous improvement methodologies (Lean, Six Sigma), • Working knowledge of:, • Demand planning, forecasting, and scheduling, • Safety programs (OSHA, Workers’ Compensation), • Quality systems (RCA, CAPA, SQF, AIB, ISO), • Experience managing customer relationships in a dedicated or contract manufacturing environment, • Experience working with temporary labor models, • Strong leadership, communication, and problem-solving skills, • Proficiency with WMS, Microsoft Office, and operational systems, • Bilingual (English/Spanish) a plus, • Ability to work flexible hours in a multi-shift operationWhy Join Qual Pac / Pro Pac, • Established, stable company with 50+ years of success, • High-impact leadership role supporting a major national brand, • Opportunity to lead a large-scale, fast-paced operation, • Collaborative and team-oriented culture

Job Description Salary: $110,000.00 to $125,000.00 Other Forms of Compensation: $1,000.00 Yearly Manager Bonus Potential Plant Operations Manager - Texas Health Presbyterian Hospital - 1st Shift Crothall Healthcare, a Compass Healthcare company, provides specialized, high-quality, innovative, and responsive support services exclusively to the healthcare industry. Crothall serves many of the Top 100 Hospitals throughout its over 900 hospital partners across 46 states. Crothall has been recognized as one of Modern Healthcare’s Best Places to Work and Best Places to Work in Pennsylvania since 2013. Crothall has more than 32,000 team members, with core services include: Environmental Services, Patient Transportation, Patient Observation, Healthcare Facilities Management, Sterile Processing Services, and Ambulatory EVS. Learn more at . Job Summary Job Summary The Plant Operations Manager will perform administrative, supervisory, and manual tasks to assure proper operation and maintenance of grounds, facility, electrical, mechanical, and a wide variety of equipment in accordance with local, state, and national building codes; coordinate custodial/maintenance services and activities; answer emergency calls as required, and be available to help repair breakdowns in the facilities. Responsibilities: • Perform or supervise work necessary to maintain mechanical, electrical, plumbing, HVAC, and special systems including repair of interior fixtures, furnishings, and equipment., • Coordinate inspection of, monitor, and repair mechanical, electrical, plumbing, HVAC, and special systems to determine cost effective repair or replacement., • Manage preventive maintenance schedules for all facilities, maintenance equipment, and maintenance vehicles., • Perform or coordinate grounds and exterior building maintenance to include lawn care, sprinkler system, parking lot, and exterior fixtures and finishes., • Develop and manage facility maintenance and/or custodial schedules, activities, and services., • Perform facility repair and/or construction work as required., • Complete necessary administrative reports and records to ensure job requests, repairs, and maintenance work is adequately received, recorded, prioritized, and completed in a timely manner., • Select, train, motivate, and evaluate assigned personnel, • Develop, prepare, and recommend plans, specifications, and cost estimates for building maintenance, repair alteration, and construction activities., • Coordinate with OSHA on formal inspections of the facility., • 5+ years of responsible building maintenance experience including supervisory experience., • High School Diploma or equivalent to two years of college or trade apprenticeship plus verifiable experience equal to journeyman status in an accredited building trade or mechanical maintenance training program with specialized course work or experience in construction, electrical, plumbing, planning, building systems, building maintenance, or related fields., • Must be current or obtained within a specified time frame as defined upon employment. Valid driver's license. OSHA 30. Universal HVAC/CFC Certification Apply to Crothall today! Crothall is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Crothall are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Crothall maintains a drug-free workplace. Req ID: 1532696 Crothall Healthcare Abigail Van Eman [[req_classification]]

Line of Business: Service & Support About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Lead and apply regional reliability engineering strategies to improve equipment performance, uptime, and maintenance cost effectiveness across multiple cement plants. * Monitor equipment health using condition monitoring technologies (vibration, thermography, oil analysis, and other predictive tools), analyze reliability data and KPIs, and translate insights into actionable maintenance plans. * Facilitate root cause and reliability failure analyses for equipment, process, quality, and production issues, ensuring sustainable corrective actions are implemented and tracked. * Collaborate with plant maintenance teams to optimize preventive and predictive maintenance programs, outage planning, and asset performance strategies. * Drive continuous improvement initiatives and support facilities in implementing Heidelberg Materials maintenance and reliability programs. * Develop and implement effective spare parts management strategies across the plants supported, ensuring identification and availability of critical spare parts, optimizing inventory levels and minimizing costs. What Are We Looking For * Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or a related field * Demonstrated experience in reliability engineering within a cement, heavy industrial, or continuous manufacturing environment. * Strong working knowledge of reliability principles, condition-based maintenance, and root cause analysis methodologies. * Proficiency with predictive maintenance technologies and computerized maintenance management systems (preferably SAP). * Strong analytical, problem-solving, and project management skills with the ability to support multiple sites remotely. * Willingness to travel to the plant and corporate sites supported for inspections, meetings, and project implementation. This role is based in a central location and provides remote support to multiple cement plants within a designated region. Travel to plant and corporate sites is required for inspections, meetings, and project implementation. What We Offer * Competitive base salary and participation in our annual incentive plan * 401(k) retirement savings plan with an automatic company contribution as well as matching contributions * Highly competitive benefits programs, including: * Medical, Dental, and Vision along with Prescription Drug Benefits * Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) * AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance * Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Line of Business: Service & Support Pay Range: $95,540.00 – $127,379.99 About Heidelberg Materials Heidelberg Materials is one of the world’s largest suppliers of building materials. Heidelberg Materials North America operates more than 450 locations across the U.S. and Canada with approximately 9,000 employees. We provide the materials to build a more sustainable, digital, and resilient future. What You’ll Be Doing * Develop short-, medium-, and long-term mine plans, including pit shell designs, stripping plans, waste development plans, and reclamation plans * Prepare geological models and perform resource and reserve estimations * Develop life-of-mine plans with phased development schedules, milestones, and cost inputs * Provide design parameters and volume calculations to support capital and acquisition projects * Collaborate with regional management, geologists, project managers, and engineers to evaluate mineral quantity and quality * Ensure mine plans align with regulatory requirements, safety standards, and company objectives What We’re Looking For * Bachelor’s degree in Mining Engineering, Geological Engineering, or a related field, with a minimum of 3 years of mine planning or mining engineering experience * Operational experience in mine or plant environments preferred, with the ability to apply planning concepts to real‑world operations * Professional Engineer (PE) registration or ability to obtain within two years * Proficiency with mine planning and design software (e.g., Carlson/AutoCAD, ArcGIS, Surpac) and Microsoft Office, particularly Excel for calculations, volume analysis, and data visualization * Strong analytical, problem‑solving, project management, communication, and collaboration skills, with the ability to convey technical information clearly * Working knowledge of mining regulations and safety standards Work Environment * Primarily based in a corporate office setting with periodic travel to operating sites * Flexible hybrid work schedule * Site visits may involve exposure to moving equipment, uneven terrain, dust, noise, and varying weather conditions * Up to 20% travel within the United States What We Offer * 401(k) retirement savings plan with an automatic company contribution as well as matching contributions. * Highly competitive benefits programs are offered, including: * Medical, Dental, and Vision coverage along with Prescription Drug Benefits. * Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA). * AD&D, Short- and Long-Term Disability Coverage, as well as Basic Life Insurance. * Paid Bonding Leave, 15 days of Paid Vacation and 40 hours of Paid Sick Leave. Equal Opportunity Employer – Minority / Female / Veteran / As part of our hiring process, we may use AI-assisted tools to support the screening and evaluation of candidate applications and interviews. These tools help streamline the initial assessment, but all decisions about candidate advancement are made by human recruiters and hiring managers. While technology supports early steps, every interview will be handled by experienced recruiters and hiring managers to provide a personal touch.

Job Description POSITION PURPOSE: (PM Shift 3P to 11P) This role accelerates business value by responsibilities for the reliable operation and maintenance of the plant’s manufacturing systems and physical property. Included activities are preventive maintenance, equipment trouble shooting, tool identification and usage, and small physical property repairs. Additional activities may also include operating equipment to continue to improve processing times and decrease downtimes. Demonstrates our “True North” attributes: voice of the customer, respect for the individual, no nonsense communication and utilization of facts, servant leadership and has a continuous improvement mindset in every facet of leadership and daily interaction. Leads, collaborates and demonstrates the lean principles and utilizes the lean methodologies and tools to facilitate continuous process improvements and value creation for our customers, employees and shareholders. Actively utilizes lean tools (VSM, Kaizen, A3, etc.) to inform and assess business opportunities to drive continuous improvement. Lead and participate in Kaizen and value stream mapping activities. DUTIES AND RESPONSIBILITIES: • Conduct preventive maintenance on production equipment; troubleshoot and repair malfunctioning equipment., • May be responsible for operating processing machinery and reducing downtime of equipment in the facility., • Advanced understanding and application of blueprints, schematics, and technical documentation for the proper maintenance of manufacturing and facility equipment., • Basic understanding of water plant operations and maintenance to include the following equipment: Ice Makers, Compressors, Heat Exchangers, Ammonia and Freon Refrigeration Systems, Pumps, Condensers, and Compressors, • Ensures that manufacturing equipment is functional and supplies are ready., • Ordering and inventory control of repair parts and ready service equipment for the safe and optimal function of the plant., • Tests production quality by visually inspecting ice for clarity, cube size, and hole space., • Advanced understanding of root cause analysis and countermeasure implementation., • Minor facility and building grounds maintenance including changing lightbulbs, painting, and minor plant structural repairs., • Ability to instruct and coach others in the usage of tools and equipment to conduct general facility maintenance., • This position may be required to assist with bagging product and occasionally directs production workflow based on production equipment output., • Can facilitate basic data analysis for root cause identification, • Can conduct basic electrical and electronic systems maintenance without supervision., • Identify and bring opportunities for continuous process improvement to Operation Manager’s attention., • Complete safety checklists as required by the Safety/Risk Management Department., • Able to identify, monitor and correct issues regarding industrial health and safety, • Advanced application of electrical and chemical safety measures and controls., • Make and assume other duties and responsibilities required or assigned by management., • Adhering to the Code of Business Ethics is essential. We value honesty and integrity above all else and we expect our employees to be committed to the highest ethical standards., • Ability to read and interpret documents in English, such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to work in a constant state of alertness and safe manner, • Ability to work in an unfatigued state, • Ability to accurately gauge lengths of time and distance, • Ability to quickly store and recall instructions in one’s short term memory, • Ability to concentrate and perform tasks involving high levels of cognitive function and judgment, • Ability to cope with sudden changes in surrounding and/or emergency situations and/or alarms, • Demonstrate a caring, committed and concerned attitude about safety, • Possess fast reflexes and unimpaired coordination and ability to rapidly respond to stimuli, • Not mentally or physically impaired from any cause that can adversely affect ability to safely and competently perform required functions Internal: Plant Manager, Plant employees, Regional VP, VP Engineering External: Vendors, Contractors SUPERVISORY RESPONSIBILITY: NONE Although this position may be asked to assist with directing production workflow, it is an individual contributor position and does not have any direct reports. Must maintain a professional demeanor when dealing with vendors, suppliers and contractors. Demonstrate a commitment to Reddy Ice’s values and priorities. EDUCATION AND EXPERIENCE: Required: 1. 6-8 years of work experience in an industrial maintenance operation, 2. Maintenance Certification from ONE of the following: • Journeyman Certification/License in Electrical, Plumbing, Mechanical Disciplines- State Certifying Authority, • Certified Assistant Refrigeration Operator- Refrigerating Engineers and Technicians Association, • Certified Maintenance Technician Level III- International Maintenance Institute 1.8+ years of work experience in an industrial maintenance operation 2.Completion of TWO of the following Certifications: • Programmable Logic Controller Certification- Electronics Technicians Association International, • Journeyman Certification/License in Electrical, Plumbing, Mechanical Disciplines- State Certifying Authority, • Certified Industrial Refrigeration Operator- Refrigerating Engineers and Technicians Association, • Certified Maintenance Technician Level III- International Maintenance Institute, • Certified Maintenance and Reliability Technician- Society for Maintenance and Reliability Professionals Conditions vary from normal office conditions to all areas inside and outside of plant. Exposure to extreme temperature fluctuations, electrical hazards, ammonia and heavy moving equipment. The job requires working nights and weekends with occasional travel. Overtime may be required. Work is conducted in a fast-paced, rapidly changing environment. The ability to manage stress, build professional and collaborative relationships, and reason through complex business situations is essential. Requires an eye for detail and ability to organize. Must be able to work with both hand and heavy electric tools and lift a minimum of 45lbs. Benefits: • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Retirement plan, • PLC Troubleshooting Skills, • Conveyor Chain Replacement, • Commercial Electrical Expertise, • Hydraulic Systems & Components, • Equipment Repair & Maintenance

Job DescriptionCompany Description Fairmont Dallas, located in the Arts District of downtown Dallas, offers 545 elegant guestrooms and suites, with over 73,000 square feet of flexible meeting space. For over 50 years, Fairmont Dallas has been the setting for countless civic, social cultural, convention and corporate events, setting the stage for countless memories. Job Description House Engineer/General Maintenance Person The house engineer is responsible for the repair, maintenance, and upkeep of the installations at the hotel, including immediate guest room deficiencies, as well as participating in a preventive maintenance program of all-building equipment, guestrooms, meeting rooms, ballrooms in all areas of the hotel. What you will be doing: • Flexibility in work shifts may include mornings, evenings, nights, weekends and holidays. Cover shifts in the engineering department as needed., • Become familiar with and understand all the systems (i.e. electrical distribution and lighting, swimming pool, TV antenna, fire/life safety and emergency generator, central plant, kitchen, HVAC and refrigeration, etc.) associated with the hotel operations, • Resolve guest complaints, ensuring guest satisfaction, • Organize materials, tools and equipment to perform daily assignments, • Participate in the preventive maintenance program while maintaining time lines and work schedule, • Check work orders and Engineering department service request log for maintenance deficiency calls or for any problems. Make rounds checking these problem areas; note any touch-up needs or/and safety concerns in the hotel, • Maintain par stock levels of supplies and communicate requisition needs, • Strip and refinish guestroom furniture, • Complete and of shift paperwork with any follow-up actions, • Carry out any other tasks assignedQualifications Your experience and skills include: • Previous experience in general maintenance, • Ability to communicate in English, both verbal and non-verbal, • Knowledge of tools and equipment respective to job functions, • Ability to interpret manufacturer's literature for installation, preparation, use and upkeep of various materials and products used throughout the property, • High School diploma or equivalent vocational training certificate, • Knowledge of proper cleaning techniques, requirements and use of equipment/machinery, • Exert physical effort in transporting miscellaneous items (50-150 pounds) throughout all areas of the hotel., • Endure various physical movements throughout the work areas. Additional Information What’s in it for you: • Paid time off, • Medical, Dental and Vision Insurance, 401K, • Complimentary Shift Meal, • Employee benefit card offering discounted rates in Accor worldwide, • Learning programs through our Academy designed to sharpen your skills, • Ability to make a difference through our Corporate Social Responsibility activities, such as Planet 21, • Career development opportunities with national and international promotion opportunities

Job Description Cleaver Brooks Sales and Service is looking for a Boiler Controls Technician – Mobile Steam Department to join our team in Dallas, TX. The Boiler Controls Technician will be responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment. Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Job Location: Dallas, TX Essential functions: • Wire all controls and motors for watertube and firetube boilers and auxiliary equipment., • Rebuild control valves and regulators., • Build and test control panel using Engineering wiring schematic and layout., • Build and test fuel skids using Engineering wiring schematic and layout., • Build and test condensate tanks and deaerators., • Trim out firetube and watertube boilers., • Perform start-up of Rental boilers in field., • Assist departments as required., • Reads blueprints and wiring schematics., • Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers., • Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler., • Able to fire and set combustion on boiler with all types of pneumatic controls., • Able to fire and set combustion on boiler with all types of electrical controls., • Able to train other employee’s on the operation and controls of boilers., • Maintain condition of and inventory of all tools and monitors., • Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results., • Ensure duties and company projects are accomplished in an efficient and cost effective manner., • Support peers and management with internal and external projects., • Adhere to company policies. Education: • Must possess a valid drivers license with a safe driving record without restrictions, • Must be able to read and work from blueprints and schematics., • Must be able to follow written and verbal instructions., • Must have a broad knowledge of boiler controls., • Mechanical and electrical background a must., • Must have the ability to trouble shoot boilers and auxiliary equipment., • Must be able to retrofit control systems in the field. Working Conditions and Hazards: Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions. Benefits of being a Cleaver-Brooks Sales & Service Employee: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper. By applying for this job and providing your mobile number, you consent to receive an initial text message from a Cleaver Brooks Talent Team member. You will have the option to opt out upon receiving the message. Messages may include updates on your application, scheduling initial screenings or interviews, and similar communications. Standard message and data rates may apply, and message frequency may vary.

Job Description The Mechanic I is an entry-level position responsible for performing basic maintenance and repair tasks to ensure reliable operation of plant facilities and equipment. This role supports preventative maintenance activities and assists senior mechanics and technicians in troubleshooting mechanical, electrical, and hydraulic systems. Company Overview: Premier PV is a leading manufacturer of solar electrical balance of systems solutions and renewable energy products, dedicated to advancing sustainable energy technologies. Our mission is to provide innovative, efficient, and reliable products that enhance solar energy systems. KEY RESPONSIBILITIES: • Perform routine maintenance, inspections, and minor repairs on machinery, tools, and building systems., • Assist with preventative maintenance schedules to reduce equipment downtime., • Replace and adjust belts, filters, fluids, and worn parts as directed., • Maintain cleanliness and organization of work areas, tools, and equipment., • Document maintenance activities and report equipment issues to supervisors., • Adhere to all company safety policies and OSHA regulations. REQUIRED SKILLS AND KNOWLEDGE: • High school diploma or GED required., • 1–2 years of maintenance or mechanical experience preferred., • Basic understanding of mechanical and electrical systems., • Ability to follow instructions and work as part of a team., • Strong attention to detail and commitment to safety. BENEFITS AND PAY: • Competitive hourly range, based on experience and qualifications. AGENCY STATEMENT: We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of Premier PV.

Job Description The Maintenance technician is responsible for performing and overseeing all facility and equipment maintenance, repairs, installations, and removals. This role is the senior-level maintenance position at the site and ensures all equipment is safe, functional, and operating at maximum efficiency. The Maintenance III contributes directly to safe operations, production uptime, and regulatory compliance by performing preventive maintenance, troubleshooting, and completing complex mechanical, electrical, pneumatic, and hydraulic tasks. This position requires expert technical skills, strong problem-solving ability, and the capability to work independently with minimal supervision. Our Story… So Far Founded in 1989 and headquartered in Dallas, Texas, PLA is a national supply chain solutions provider offering Pallet Management Services, 3PL Services, Reverse Logistics Services, and Freight Brokerage & Transportation Management Services. Handling over 115 million pallets per year for more than 1,500 customers, PLA is one of the largest pallet manufacturing and recycling companies in the United States. PLA operates 76+ facilities, employs 3,500+ team members across 23 states, and continues to grow both organically and through acquisition. Work Schedule: • Daily Pay Option – Access your earnings before payday, • Weekly Pay – Get paid on time, every week, • PTO (Paid Time Off), • Full Benefits: Medical, Dental, and Vision Insurance – 3 medical plan options through Blue Cross Blue Shield with low weekly premiums starting at $28.75, • Health Savings Account (HSA) – Company contribution up to $750 annually with tax-advantaged savings, • 401(k) retirement plan featuring up to a 4% employer match, eligibility the first of the month after 90 days, and access to a Financial Wellness Consultant., • Flexible Benefits – Multiple plan options to fit your needs and budget, • Prescription Drug Coverage – Low copays starting at $10 for generic medications, • FREE Life Insurance & AD&D – Basic coverage provided at no cost upon employment, • Vision Benefits – $10 eye exams and $150 frame allowance through Superior Vision by MetLife starting at $1.46 per week, • Dental Coverage – 100% preventive care coverage with MetLife plans starting at $5.76 per week, • Voluntary Short-Term Disability (STD) – Income replacement up to 60% of weekly covered earnings (max $1,500 weekly) for a non-work-related injury or illness., • Employee Assistance Program (EAP) – Free and confidential support for work stress, grief, legal/financial issues, and more., • Additional Voluntary Benefits – MetLife Legal and Identity Theft Services and Pet Insurance with ASPCA., • LifeMart employee discounts (through ADP) on everyday stuff and larger purchases (travel, electronics, entertainment, and more), • Dell Employee Purchase Program (EPP) discounts available for personal use. Role Overview & Responsibilities Reporting to the Plant Manager, the Maintenance Technician is responsible for all facility and equipment maintenance activities, including preventive maintenance, repairs, installations, and system upgrades. Responsibilities include: Equipment Maintenance & Repair • Perform all preventive maintenance and repairs on facility and production equipment, including (but not limited to):, • SMETCO machinery, • Palmatic equipment, • Forklifts and yard trucks, • Compressors, • Pneumatic and vacuum systems, • Hydraulic systems, • Electrical systems, • Production tools (nail guns, screw guns, electric motors, etc.), • HVAC (heating and air conditioning), • Lighting and facility infrastructure, • Install, troubleshoot, and remove equipment as needed.Safety, Compliance & Documentation, • Maintain all logs related to machinery, equipment, forklifts, and required inspections., • Ensure that all forklift drivers are certified and that certifications remain current., • Ensure all forklift maintenance logs and machine logs are accurate and up to date., • Enforce compliance with all safety policies, environmental regulations, and company procedures.Inventory & Facility Support, • Maintain an accurate inventory of spare parts and critical components., • Support facility upkeep, building maintenance, and grounds maintenance as required., • Provide technical guidance and assist with training less experienced maintenance personnel.What You’ll Need, • 4+ years of maintenance experience in an industrial, warehouse, or manufacturing environment, • Welding and electrical certifications or licenses required, • Valid driver’s license, • Associate degree in a technical field or trade school certification preferred, • Strong mechanical, electrical, pneumatic, and hydraulic troubleshooting skills, • Ability to work independently, prioritize workload, and handle complex repairs, • High attention to detail and commitment to safetyPhysical Requirements, • Frequent lifting, pushing, and pulling of up to 75 lbs, • Standing, walking, bending, kneeling, and climbing throughout the shift, • Ability to work in non-climate-controlled areas (heat/cold), • Ability to work at heights, use ladders, and operate tools and equipment safelyWork Environment, • Industrial/warehouse environment with exposure to noise, dust, machinery, and varying temperatures, • PPE required in all designated areas If you need assistance or accommodation during the application process because of a disability, it is available upon request by contacting . The company is pleased to provide such assistance, and no applicant will be penalized because of such a request. 2nd Shift: 2:30 pm to 11:30 (Monday thru Friday)

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description Pay: $24.73 - $30.13 Schedule: Monday- Friday (10:00 PM to 6:30 AM) with some weekend work and OT. Qualified candidates must be able to perform a variety of jobs, tasks, or duties as required; and must be dependable, able to work any shift, overtime, and weekends as required. They may also be required to pass an aptitude test. The tasks required, but not limited to, are general housekeeping, clean up, sweeping, vacuuming, painting, lubrication (oiling, greasing, etc.), power washing, lifting and hauling items up and down stairs, dump rework, and operate a motorized forklift and a variety of other miscellaneous duties as assigned. Primary Duties Keeping lines running for better efficiency • Complete work orders as assigned, • Keep work areas neat and clean, • Working Safely and following all SOP’s on lock out of equipment, • Conduct PM on assigned areas, • Completion of daily and monthly PMs, • Able to assist others on job task, • Identify needed mechanical improvements, • Make necessary mechanical repairs when possible, • Identify and work to eliminate unsafe conditions and/or practices, • Completion and accuracy of down time sheets/GMP log, • Ability to be on call on weekends when required, • Working with line operators/supervisors to proactively maintain lines running, • Completing work orders in a timely matter Qualifications Education: High School Diploma or equivalent Relevant Experience: Previous relevant experience, preferably in a manufacturing environment Equipment/Software Skills: Basic computer knowledge - data entry Competencies: • Ability to get along well with other people, • Ability to operate and understand packaging equipment and processes, • Strong written and verbal communication skills, • Desire to advance in Maintenance Department, • Ability to operate forklift truck, scissors lift and zoom boom, and sky trac, • Basic mechanical skills, • Ability to rewire electrical components throughout plant (strong industrial electrical background), • Ability to connect laptop to equipment to troubleshoot machine, • Ability to wear respirator (SCBA and/or cartridge type) (physical may be required) Additional Information Physical: This position requires the ability to lift up to 50 pounds, climb stairs, bend, kneel, stand for extended periods, work in confined spaces, and work at heights Sensory: Mental/Reasoning: Must be able to analyze information quickly to provide feedback in the manufacturing process and troubleshoot equipment failures Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description This Is How We Fly At JSX, we’re not just a lifestyle carrier – we’re a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As a Component Technician, you will be responsible for performing repair and overhaul activities on aircraft engines, Auxiliary Power Units (APUs), modules, accessories, and related components. In this role, you will troubleshoot, disassemble, clean, inspect, assemble, test, and preserve aircraft components while ensuring all work is completed in accordance with FAA regulations, OEM manuals, company procedures, and industry safety standards. Your technical expertise and attention to detail will play a critical role in maintaining the reliability, performance, and airworthiness of our aircraft systems. A Day in the Life: Your day will be hands-on, technical, and detail-oriented, focused on ensuring aircraft engines and components are repaired, overhauled, and returned to service safely and efficiently. Typical responsibilities include: • Engine Troubleshooting & Repair: Perform troubleshooting and repair activities both on-wing and off-wing under general supervision, following departmental procedures, technical manuals, and safety standards., • Engine Disassembly & Assembly: Disassemble and reassemble turbine engines and related components using specialized aircraft tooling, balance machines, drill presses, surface grinders, and other overhaul equipment., • Component Inspection: Conduct detailed inspections of engine parts using precision tools such as magnifying glasses, vernier calipers, depth gauges, binoculars, buffers, and pressure testers to identify cracks, burns, foreign object damage (FOD), and other structural defects., • Repair Evaluation: Evaluate engine components to determine repairability or replacement requirements by performing precision measurements and referencing micrometers and other testing equipment., • Non-Destructive Testing (NDT) Support: Inspect engine parts to identify applicable non-destructive testing requirements and ensure compliance with inspection standards and procedures., • Technical Documentation & Systems: Utilize inventory and maintenance database systems to retrieve and document part numbers, serial numbers, manufacturing information, and repair records with accuracy and traceability., • Regulatory & Manual Compliance: Reference technical publications, OEM manuals, specification sheets, and regulatory requirements to ensure all maintenance tasks are completed in the proper sequence and appropriately documented., • Be Part of a Team That Values You: Join a tight-knit, supportive team of professionals who are passionate about aviation and committed to safety and excellence., • No Two Days Are the Same: From troubleshooting to routine checks, you’ll enjoy a fast-paced, engaging work environment., • Make a Tangible Impact: Your attention to detail and technical expertise directly contribute to flight safety and an exceptional Customer experience., • Opportunities to Grow: We’re invested in your long-term success, offering ongoing training, certifications, and a clear path to advance your career. We’re looking for someone who is: • Adaptable: You thrive in dynamic environments, adjusting quickly to changing priorities, weather, and operational needs., • Collaborative: You know how to work seamlessly with cross-functional teams., • Critical Thinker: You can quickly assess situations and make sound, safety-first decisions., • Detail-Oriented: You understand that precision matters – especially when it comes to aircraft performance., • Safety-Oriented: You instinctively prioritize safety in every action and hold yourself and others accountable to the highest safety standards., • High school diploma/GED, • Ability to occasionally lift 75+ pounds, • Ability to perform intermittent physical activity including bending, reaching, and prolonged periods of standing., • Participation in initial and random drug and alcohol screenings in accordance with the DOT and FAA guidelines., • 2 years or more of experience on gas turbine engines or possession of an FAA-issued Power Plant license for disassembling/assembling turbine engines and inspecting aircraft engine parts for physical defects., • Current and valid Airframe and Rating., • A current and valid Driver’s license is required., • Current and valid Powerplant Rating required., • Read and write in English, adhering to required standards in the performance of assigned work, and demonstrating competencies in accordance with FAA Regulations, OEM manuals, and related materials., • Familiar with AC engines, including knowledge of Federal Regulations, visual inspections, receiving inspections, engine testing procedures Pay & Perks: Compensation is $29.00 - $35.00 per hour. This was established after performing market research and is aligned with our approach to compensation. • Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost., • Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel other major domestic & international airlines for you and your qualifying immediate family., • 401(k) match: 50% of your first 8%, • Generous PTO: Take time to recharge with our flexible PTO plan. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, and national origin. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Job Description Cleaver Brooks Sales and Service is looking for a Senior Boiler Controls Technician to join our team in Dallas, TX. The Senior Boiler Controls Technician is responsible for wiring, firing, and testing boilers in the shop & field. This position is responsible for the readiness of the customer equipment. Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Job Location: Dallas, TX Signing Bonus Details: • Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days), • Wire all controls and motors for watertube and firetube boilers and auxiliary equipment., • Rebuild control valves and regulators., • Build and test control panel using Engineering wiring schematic and layout., • Build and test fuel skids using Engineering wiring schematic and layout., • Build and test condensate tanks and deaerators., • Trim out firetube and watertube boilers., • Perform start-up of Rental boilers in field., • Assist departments as required., • Reads blueprints and wiring schematics., • Able to trouble shoot, fire, and set combustion on all types of boilers, including but not limited to boiler with superheaters, desuperheaters, and economizers., • Determines valve trim, regulator size and spring, oil gun length and size, and all other parts and accessories needed to fire any boiler., • Able to fire and set combustion on boiler with all types of pneumatic controls., • Able to fire and set combustion on boiler with all types of electrical controls., • Able to train other employee’s on the operation and controls of boilers., • Maintain condition of and inventory of all tools and monitors., • Apply intellect, creativity, adaptability, judgment, and management skills to achieve required results., • Ensure duties and company projects are accomplished in an efficient and cost effective manner., • Support peers and management with internal and external projects., • Adhere to company policies. Education: • Must possess a valid drivers license with a safe driving record, • Must be able to read and work from blueprints and schematics., • Must be able to follow written and verbal instructions., • Mechanical and electrical background a must. Requires stooping, climbing, bending, crawling, and lifting 50 pounds, working in confined and elevated areas, and prolonged standing. Working Conditions and Hazards: Some work in physical plant environment where plant orientation may be required and safety precautions are required. May encounter some unpleasant working conditions of brief duration. Little to no contact with hazardous conditions. Benefits of being a Cleaver-Brooks Sales & Service Employee: • Competitive salary, • Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability, • Cash matching 401(k) plan, • Employee assistance program (EAP), • Pet insurance, • Employee discount program, • Tuition assistance Cleaver-Brooks Sales and Service, Inc. (CBSS) is a market leader in providing fully integrated boiler and burner systems. CBSS offers a full range of capabilities from: new equipment, installation, rentals, retrofits, repairs, parts, and service. We can deliver, install, and upgrade boiler room solutions that improve efficiency, reduce cost, and optimize space. CBSS delivers the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. We are a 24/7 customer driven operation. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Job DescriptionPosition Description: JOIN OUR TEAM!Come Grow With Us! Presbyterian Village North has immediate openings for HVAC Certified MAINTENANCE TECH III + $500.00 Sign On Bonus!Day shift Monday - Friday + On Call (7-8 week rotation)Show us your advanced mechanical and electrical skills. Take pride in keeping our campus maintained!Wonderful environment and strong teammate relationships!Affordable medical, dental, and vision benefits. 401K is available after your 1st year. Come grow with us.With a shared legacy in business and healthcare innovation, Forefront Living's family of care-oriented organizations blends values built on compassion and faith with high-quality senior care - long-term care, Alzheimer's and memory care, skilled nursing and rehabilitation therapies, hospice, and palliative care. These senior care services, along with the celebration of independent living at our senior lifestyle communities, combine to bring deeper meaning to every phase of life for people of all faiths, regardless of race, gender, color, religion, national origin, or disability. Forefront Living is the not-for-profit, faith-based parent of Presbyterian Village North, Faith Presbyterian Hospice, and the T. Boone Pickens Hospice and Palliative Care Center. ESSENTIAL DUTIES:• Day to day routine maintenance of heating, refrigeration air conditioning, and ventilation • Purchase supplies as instructed by Director of Facilities, • Assist with inclement weather protection and repair (de-ice parking lots, etc.)• Maintain record keeping of completed work and preventative maintenance files, • Maintain good attendance record, • Other duties as assignedMINIMUM QUALIFICATIONS:• High School diploma or GED is required• HVAC Certified is preferred, • EPA Certified, • Valid Texas driver’s license and clear driving record, • Demonstrate five or more years of maintenance work with building maintenance, • Knowledge of work safety factors, • Ability to identify and correct plumbing, and related problems, • Ability to read, write and effectively communicate in English

Job Description Warehouse Associate – Dallas, TX (Boeing Plant) | $16/hr | 1st Shift Location: Dallas, TX – Boeing Plant Pay Rate: $16/hour Schedule: Monday–Friday, 7:00 AM–3:30 PM (occasional Saturdays) Position Summary We are seeking a reliable and detail‐oriented Warehouse Associate to join our team at the Boeing Plant in Dallas, TX. As a Warehouse Associate, you will be responsible for handling materials, processing orders, and supporting daily warehouse operations in a fast‐paced environment. This role requires accuracy, safety awareness, and the ability to work independently. Please note: Because this Warehouse Associate position is located inside the Boeing Plant, compliance and badging requirements may take up to 2 weeks before your official start date. A valid driver’s license and birth certificate are required. Key Responsibilities • Operate forklifts, pallet jacks, or dock loaders to move products and materials, • Read and interpret production schedules, customer orders, work orders, and shipping documents, • Pick, pack, and distribute items according to order specifications, • Record quantities of materials received and distributed, • Maintain equipment in clean and safe working condition; report service needs promptly, • Follow all safety protocols and company procedures, • Eligibility to badge at the Boeing Plant in Dallas, TX, • Ability to lift and move heavy items as needed, • Strong attention to detail and ability to work independently, • Previous warehouse experience preferred Apply today and experience the SkySource difference!SkySource Solutions believes in attaining success. We know success is important to our clients, applicants, candidates, and our internal staff and want to be an integral part of that process.\r\nThe SkySource Difference: We are not just another staffing firm! We truly care about our candidates long-term success and how we get there together. So the BIG Question is... How do we get there?\r\nOur team of Recruiters come with 5 plus years of industry experience and are not looking to just find you a job. We truly care about your short-term and long-term career goals and understand what's important in making that next career move. We want to understand what you are looking for from a cultural, compensation and benefits perspective. \r\n\r\nApply today and experience the SkySource difference!

We’re looking for a Quality Control Supervisor to join a growing food manufacturing team and play a critical role in ensuring product safety, quality, and compliance from raw materials through finished goods. 📍 Location: Dallas, TX 💼 Schedule: 1st Shift (Monday–Saturday, 6:00–7:00 AM start) 💰 Salary: $60,000 – $65,000 What You’ll Do • Lead day-to-day quality control operations within the plant, • Conduct inspections and testing of raw materials, in-process products, and finished goods, • Ensure compliance with FDA, USDA, HACCP, and SQF standards, • Investigate quality issues, customer complaints, and implement corrective actions, • Train, mentor, and supervise QC team members, • Analyze quality data to identify trends and drive improvements, • Partner with suppliers to resolve material quality issues, • Support internal and external audits and maintain proper documentation, • Drive continuous improvement initiatives to enhance safety, quality, and efficiency What We’re Looking For • 3+ years of experience in food manufacturing in quality control, • Prior leadership or supervisory experience preferred, • Strong knowledge of food safety regulations and quality systems, • Experience with HACCP, SQF, GFSI, or similar standards is a plus, • Excellent problem-solving, analytical, and communication skills, • Degree in Food Science, Chemistry, or related field (or equivalent experience)

Account Executive - AI Robotics -REMOTE In Dallas (candidate must be based in/very close to Dallas t visit clients) Intalex is partnered with a robotics and automation technology business founded a few years ago, that has raised close to $40 million. They have a killer product that has huge cost-saving benefits for manufacturers. They are now looking to scale up their AE team this year with multiple hires. The Company…❓ 💼 Focused on bringing robotics solutions into mid-market manufacturing, logistics, and operations. 💼 Their technology helps companies automate complex operational processes. 💼 Unique positioning (and pricing model) in robotics hardware + software solutions for mid-market clients. 💼 Works with operators, plant managers, and business owners in industrial environments. The Role…❓ 💼 Account Executive – responsible for full sales cycle from pipeline creation to close. 💰 Base around $80,000-$115,000 depending on Experience. OTE around $160,000-$230,000 + Equity -Low six-figure deal sizes 🚀 Selling mid-market solutions to decision makers: operations leaders, plant managers, and business owners. 💼 Reporting to the Head of Sales, part of a growing GTM team - all together helping to build playbooks 📍 Remote - has to be based in/around Dallas Who This Role Suits❓ 🧠 Experienced AE in mid-market B2B sales with 2–6 month cycles. ✅ An interest in selling technical solutions into industrial or operational environments. ✅ Looking for high impact in a fast-growing, collaborative team. ✅3+ years in a closing role, selling robotics/Automation hardware, or SaaS to more technical personas in the manufacturing sector Why Join❓ • Opportunity to drive mid-market sales in a fast-scaling robotics company., • Work with cutting-edge automation technology.

Job Description OVERVIEW: Lift Truck Operators are responsible for operating varied styles and models of Powered Industrial Trucks to transport, locate, relocate, stack, and load and unload finished goods, raw materials and other products within warehouse (inventory/receiving), distribution, and production areas. Lift Operators are expected to maneuver the forklift at a reasonable and prudent speed, watching closely for pedestrians or other motorized vehicles as well as fine manipulation with a respect to the preservation of product, building structure and property. Operating a lift truck is a specialized job that requires training and authorization by the company. The Operator is expected to have the mechanical knowledge and skills to operate a lift truck in a safe and professional manner under all conditions This position places a strong significance on responsibility, safety, effective teamwork, clear communication, sound judgment, mechanical orientation, and a dedication to the quality of our product. ESSENTIAL DUTIES & REQUIREMENTS • Maintains PIT certification., • Observes all Safety Rules and operates without harm to person or property. LIFT TRUCK OPERATOR DUTIES: Duties may vary based on department assignment to include Distribution, Warehouse (Inventory / Receiving) and Kitting • Load, unload, move, stack, pick, consolidate, and stage product rotation and storage of product and materials in Finished Goods and WIP areas, racks, bins or shelves according to predetermined sequence or product code., • Assist team members in picking, staging, loading, unloading, rotation and storage of product., • Replenishment from bulk to cases and “eaches” isles for pickers to pick orders, • Order Selecting / picking for PAB, LTL, UPS/FedEx, • Consolidating and moving inventory, • Use radio frequency equipment for picking, receiving, put away, and load functions, as required., • Maintain the facility’s equipment and materials in a neat, clean, and orderly fashion., • Inspect and perform minor maintenance on the forklift or other equipment daily., • Operate all equipment in a safe and efficient manner following prescribed work methods., • Ability to work independently with minimal supervision, • Effective Communication and Interpersonal Skills, • Strong teamwork with ability to Establish and Maintain Relationships in a professional manner, • Exhibits a High sense of Urgency and works well under pressure and accelerated time-lines, • Possess a Positive Manner and Approach, • Practices Sound Judgement with the ability to make decisions in a timely manner, • Adaptable and Flexible, • High level of Responsibility and Reliability to include maintaining good attendance The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the associate spends most of shift sitting or standing, using their hands and fingers to handle, control, or feel objects, tools, or controls, and bending or twisting their body. Associate will also bend, squat stoop and lift (typically less than 50 lbs.), reach with hands and arms, balance, and maneuver around production equipment throughout the shift. Operator is required to hear and see to include close vision, distance vision, peripheral vision, depth perception and ability to adjust and focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Manufacturing / Production Floor: While performing the duties of this job, the Associate is frequently exposed to moving mechanical parts. The noise level in the work environment is usually moderate however there may be areas designated as Hearing Protection required and provided earplugs are mandatory in those areas. Not all areas of the plant and warehouse are climate controlled and exposure to heat and/or cold can occur. The Associate is frequently exposed to dust and floating particles used in the manufacturing, storage and inventory of raw materials and finished goods. Keeco LLC is a drug free workplace and an equal opportunity employer. The Company is committed to providing equal employment opportunity in all employment practices, including but not limited to, selection, hiring, promotion, transfer, and compensation to all qualified applicants and employees without regard to age, race, color, natural origin, sex, pregnancy, sexual orientation, gender identity, religion, handicap or disability, genetics, citizenship status, service member or veteran status, or any other category protected by federal, state, or local law.

Cybersecurity & Architecture Director Department: IT Reports To: Vice President, IT Status: Exempt Location: Grapevine Area— onsite 4 days/week Job Summary The Director, Cybersecurity & Architecture leads the strategy, identification, implementation, and continuous improvement of the company’s cybersecurity program, governance frameworks, and enterprise architecture. Business systems include ERPs, CRMs, HRIS, BI, Finance, Supply Chain, Logistics software, and other enterprise platforms. This role combines technical expertise with operational leadership to ensure these systems support a manufacturing and distribution-based business. The Director is responsible for improving security maturity, embedding cybersecurity into architectural decisions, and ensuring systems and infrastructure are built and operated securely across business units and brands. Key responsibilities • Define and own enterprise IT architecture standards with cybersecurity embedded at the foundation., • Establish security-by-design principles across infrastructure, applications, and plant operations., • Own and drive the enterprise cybersecurity program, vision, strategy, maturity roadmap, and CAPE controls reporting., • Hold budget authority and vendor selection responsibility for cybersecurity initiatives., • Lead cybersecurity due diligence and integration architecture for M&A activity., • Own the security onboarding playbook for acquired businesses., • Own enterprise IAM architecture and execution roadmap, including SSO, provisioning, PAM, MFA, access reviews, monitoring, and AD consolidation., • Own Incident Response, Business Continuity, and Disaster Recovery programs., • Develop IR plans, incident playbooks, BIAs, tabletop exercises, RPOs, and RTOs., • Partner with and mentor the infrastructure team across M365 hardening, cloud security, network design, and endpoint security., • Drive security awareness education and a proactive risk management culture. Required qualifications • Bachelor’s degree in Information Systems, Computer Science, Cybersecurity, or related field., • 10+ years of progressive cybersecurity and IT architecture experience., • Experience owning an enterprise cybersecurity program end to end., • Experience with program development, strategy, roadmap, budget authority, and vendor selection., • Hands-on security architecture experience across cloud, network, endpoint, and identity., • IAM program experience, including SSO, PAM, MFA, and Active Directory in multi-entity or multi-domain environments., • M&A cybersecurity experience, including due diligence, integration planning, and onboarding., • Strong leadership presence and ability to mentor technical teams., • Experience with cyber risk management, compliance, and frameworks such as NIST CSF, ISO, or CIS Controls., • Ability to communicate cybersecurity risk and strategy to executives and board-level audiences. Preferred qualifications • Manufacturing or industrial environment experience., • OT/ICS security and shop floor network segmentation experience., • Certifications such as CISSP, CISM, SABSA, or equivalent., • Advanced degree., • Steady career progression with demonstrated promotion and tenure

The Maintenance Supervisor is responsible for leading daily maintenance operations to ensure safe, efficient, and reliable manufacturing performance. This role oversees the repair, maintenance, and installation of machinery, equipment, and facility systems while supporting production goals, regulatory compliance, and continuous improvement efforts across the plant. Key Responsibilities • Supervise and support the Maintenance team, including scheduling, training, and daily work assignments, • Partner with the Maintenance Planner to prioritize and assign work orders effectively, • Ensure preventive, predictive, and corrective maintenance is completed on time and meets quality standards, • Adjust priorities to support production needs and minimize downtime, • Inspect completed work to ensure compliance with safety and operational standards, • Maintain accurate maintenance documentation and labor records, • Promote a safe work environment in compliance with OSHA and cGMP standards, • Support cost control initiatives and continuous improvement efforts, • Uphold food safety, quality standards, and regulatory compliance Qualifications • Associate’s or Bachelor’s degree, technical certification, or equivalent hands-on experience, • Proven experience leading or supervising maintenance teams in a manufacturing environment, • Strong mechanical aptitude and working knowledge of maintenance planning processes, • Understanding of asset reliability and equipment lifecycle best practices, • Knowledge of food manufacturing regulations, including FDA, USDA, OSHA, and EPA standards, • Proficiency in Microsoft Office and experience using CMMS systems, • Continuous improvement mindset with the ability to manage multiple priorities, • Strong problem-solving and decision-making skills, • Effective leadership skills, including coaching and team development, • Strong written and verbal communication skills, • Ability to stay organized and maintain attention to detail in a fast-paced production environment

Required Skills & Experience • Minimum 5+ years of Wireline Outside Plant Construction Project Management experience, • Strong Fiber Overbuild / FTTH experience, • Proven customer-facing project management experience, • Strong data manipulation and reporting skills, • Advanced Microsoft Excel skills (VLOOKUP, Pivot Tables, reporting), • Experience managing construction crew workload and forecasting, • Understanding of Work-in-Progress reporting and 90-day forecasting, • Ability to interpret construction prints / blueprints and site layouts, • PMP Certification (preferred), • Experience supporting telecom client, • Familiarity with Google Drive & Sheets, • Familiarity with Quick Base, • Coordinate all activities involved in Wireline OSP construction operations, • Run Fiber Overbuild (FTTH) projects, • Serve as liaison between Supervisors and Customers, • Communicate daily and weekly with homeowners and customers, • Schedule and forecast construction crew workload, • Manage change orders and ensure pre-approval and margin protection, • Maintain accurate forecasting and project reporting, • Work directly with municipalities to secure and manage permits, • Host customer meetings and manage escalations, • Track production, overage job management, and market productivity metrics, • Wireline Fiber (FTTH Overbuild), • Buried and Aerial Fiber Construction, • Microsoft Excel (Advanced functions required), • Project tracking and forecasting systems, • Google Drive / Sheets (preferred), • Quick Base (preferred)

Job DescriptionThe primary responsibility of the Bindery Folder Operator consists of producing a quality product in a high-speed production environment on folding equipment. The ideal candidate will have good knowledge and skills in folding various printed and coated paper products. Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities General Duties and Responsibilities: • Must have knowledge in setup and operation of MBO/Stahl Folders, as well as the general maintenance of the equipment., • Read, understand, and follow work order instructions and pre-established guidelines to determine set up specifications and perform the functions of the job., • Knowledge of commonly-used concepts, practices, procedures, and terminology within the offset bindery field (wrinkles, dog ears, tail of sheet, and offset)., • Set up and operate the machine to fold, slit, and score printed sheets., • Set up and operate folding machine to fold from 1-up to multiple up., • Set up and operate folding machine to fold various product configurations., • Follow and comply with all company Quality Control procedures and policies., • Ability to select, inspect, compare and confirm customer samples., • As a team member always assist others when needed or requested., • May be cross-trained in other areas of the plant and perform other duties as assigned., • Must be able to work well with others and function with limited supervision., • Demonstrate safe work habits in a manufacturing environment.Job requirements:, • Requires a high school diploma or GED., • 3-4 years of related work experience preferred., • Reading, comprehending, and communicating work order instructions verbally and or in writing., • Must have essential math skills and read a ruler to 32nds and metric (mm)., • Ability to lift 50 pounds routinely as well as handle paper rolls up to 42 inches in diameter., • Ability to stand for extended periods of time and move between production devices to load and unload materials., • Bending, stooping, reaching, pushing, pulling, and lifting repetitively for extended periods of time. Requisition #cmo3fz9iqlsck0jlc5m5ntj3i

About Us: MN8 Energy is one of the largest independent solar energy and energy storage owner-operators in the U.S., serving enterprise customers with clean energy and complementary solutions, such as battery storage and EV Charging, to enable an electrified, decarbonized world. Originally founded inside of Goldman Sachs in 2017, our fleet has grown to nearly 3-gigawatts of solar, including 850 projects across 27 states, and over 270 megawatts of battery storage projects, with each project tailored to achieve the bold decarbonization targets and goals of our more than 200 blue-chip customers. MN8 is headquartered in New York with offices in Boca Raton, Florida; Dallas, Texas, and Madrid. Overview: The Control Room Operator is responsible for 24×7 remote operations of MN8 ’s renewable fleet across the country. This includes monitoring and operational support via SCADA and CMMS systems . Following established processes and procedures to ensure proper and safe operations. Identifying and efficiently dispatching personnel to correct deficiencies. Communicating with external parties to such as Scheduling Coordinators, Transmission Operators and other various regulatory personnel. Additionally, Control Room Operators are responsible for ensuring all NERC regulations and requirements are met . All remote operations will be performed from the Dallas, Tx Office. As the Control Room Operator, you will: • Monitoring and operating sites as directed by procedures and Operational Directives., • Utilize provided information to make decision with financial impact to the company., • Interacting with Field personnel, Grid Operators, and our customers., • Ensure all identified site issues have a corresponding, properly documented ticket within the CMMS., • Review and ensure Logging of regulatory calls, resets and all other items not handled by the CMMS system., • Investigate and escalate identified issues to Performance Engineering as required., • Ensure operation and maintenance activities meet or exceed contractual obligations. (e.g. performance and availability guarantees, preventive maintenance, reactive response times, landscape management, panel washes, non-conformity correction, etc.), • Provide information and support to dispatched field personnel to ensure successful site response., • Any other duties and responsibilities as determined by the manager. Our Ideal Candidate will have: • 2-Year technical degree, Military experience in a technical field, or equivalent industry experience., • Operational knowledge of solar, storage, or EV charging., • Knowledge and understanding of solar plant construction and comprehension of how onsite equipment interacts with the overall plant., • Ability to communicate in English both orally and in writing., • Experience in SCADA systems, PLC, or plant control systems., • Outstanding communication and interpersonal abilities., • Experience in plant operations and control rooms., • Experience in Generator Operator, Scheduling Coordinator, or Transmission Operator is preferred., • Knowledge of electrical theory., • Extensive experience with Microsoft Office Suite to include word, excel, OneNote, and outlook., • Ability to multitask and adapt to changing priorities., • Ability to make decisive decisions based on available information when support personnel are not available. Physical Requirements: • Ability to drive a vehicle., • Ability to stand for long periods of time., • Ability to walk distances up to 5 miles in a day., • Ability to receive detailed information through oral and written communication, and to act upon as needed., • Required to have visual acuity which includes depth perception., • Required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned. Other Requirements: • May be required to travel., • Required to work in office conditions., • Required to perform all duties in-office., • Required to work 4×10 work week on a Night shift; To include Holidays and Weekends., • Work in a fast-changing environment that may require quick decisions with limited processes and procedures. How we set you up for success: At MN8, we know our most valuable resource is our people. That’s why we offer the following benefits. By investing in you, we know we are investing in the clean energy of tomorrow. • Medical/Dental/Vision Insurance beginning the 1st of the month following your date of hire, • Paid Time Off, • Paid holidays and floating holidays, • 401(k) with competitive employer match, • Parental leave MN8 Energy is an Equal Opportunity Employer and fully subscribes to the principles of Equal Employment Opportunity to ensure that all applicants and employees are considered for hire, promotion, and job status without regard to race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, marital or familial status.

Job DescriptionThe primary responsibility of the Bindery Folder Operator consists of producing a quality product in a high-speed production environment on folding equipment. The ideal candidate will have good knowledge and skills in folding various printed and coated paper products. Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities General Duties and Responsibilities: • Must have knowledge in setup and operation of MBO/Stahl Folders, as well as the general maintenance of the equipment., • Read, understand, and follow work order instructions and pre-established guidelines to determine set up specifications and perform the functions of the job., • Knowledge of commonly-used concepts, practices, procedures, and terminology within the offset bindery field (wrinkles, dog ears, tail of sheet, and offset)., • Set up and operate the machine to fold, slit, and score printed sheets., • Set up and operate folding machine to fold from 1-up to multiple up., • Set up and operate folding machine to fold various product configurations., • Follow and comply with all company Quality Control procedures and policies., • Ability to select, inspect, compare and confirm customer samples., • As a team member always assist others when needed or requested., • May be cross-trained in other areas of the plant and perform other duties as assigned., • Must be able to work well with others and function with limited supervision., • Demonstrate safe work habits in a manufacturing environment.Job requirements:, • Requires a high school diploma or GED., • 3-4 years of related work experience preferred., • Reading, comprehending, and communicating work order instructions verbally and or in writing., • Must have essential math skills and read a ruler to 32nds and metric (mm)., • Ability to lift 50 pounds routinely as well as handle paper rolls up to 42 inches in diameter., • Ability to stand for extended periods of time and move between production devices to load and unload materials., • Bending, stooping, reaching, pushing, pulling, and lifting repetitively for extended periods of time. Requisition #cmo3fz9iqlsck0jlc5m5ntj3i

Job DescriptionDescription: Focus/Objective The Extrusion Operator Assistant supports plant operations by assisting in machine set-ups, helping maintain production standards, and ensuring safe and efficient workflows. Job Duties and Responsibilities: • Adjust, calibrate, and test equipment at the beginning of every shift to ensure proper pressure, speed, temperature and general operation., • Examine visually, weigh and measure components created from equipment at the end of the week to ensure machines are produced according to company and industry regulations and standards, adjusting as needed., • Work with team members, shift supervisors and all necessary personnel to take care of complications as they arise, • Communicate with fellow team members to learn of any equipment problems or malfunctions and take care of them as they come up., • Use regulated cleaning solutions, grease guns, oil cans, air hoses and cleaning cloths to properly maintain and clean equipment on a bimonthly basis., • Make repairs to equipment when necessary, and replace all defective, broken or worn-out components., • Strong organizational, interpersonal, problem-solving skills and team player., • Detail oriented and commitment to follow through to completion., • Ability to work in a fast-paced environment., • Prolonged periods of standing, bending, and walking from one end of the building to the other., • Manufacturing experience preferred, • Integrity – Supports Governance and Compliance programs and company code of conduct. Maintains confidentiality; inspires respect and trust; does the right thing; reports potentially unsafe conditions; takes responsibility for own actions., • Teamwork – Works well in group situations; supports everyone’s efforts to succeed; contributes to building a positive team environment; shares expertise with others; is consistently on time at work., • Communication – Balances listening and talking; speaks and writes clearly and accurately, influences others; communicates changes and progress; participates in meetings., • Respect for the individual – Shows respect and sensitivity for cultural differences; educates others on the value of diversity; focuses on solving conflict, not blaming., • Data & process-driven decision making – Applies design principles; quality problem solving; develops alternate solutions; develops realistic action plans; develops strategies to achieve organizational goals., • Urgency without frenzy – Generates creative solutions; manages competing demands or unexpected events; adapts strategy to changing conditions; prioritizes and plans work activities; sets goals and objectives., • Accountability – Takes ownership of work; does what is needed without being asked; follows through., • Takes responsibility for own actions; ensures work responsibility is covered when absent; observes safety and security procedures., • Continuous Improvement – Thinks of better ways to do things; understands the organization’s strengths and weaknesses; adapts to changes in work environment; ability to assess own strength and needs; strives to continuously build knowledge and skills.Requirements: Preferred Skills/Qualifications & Education: • 12 to 24 months of experience as an Extrusion Machine Operator Assistant or related experience, • Successfully completed all requirements from the respective Extrusion Operator Check sheet, • Able to work in a fast-paced manufacturing environment, • Experience or ability in mentoring and training, • Exemplify EE Dallas QB Inc.’s safety culture in everyday activities., • Gain a thorough working knowledge of EE Dallas QB Inc. Environmental, Safety & Health (ESH) policies and procedures., • Follow all EE Dallas QB Inc. facility and corporate ES&H procedures and practices., • Attend and actively participate in facility ESH meetings and forums that will drive employee involvement., • Participate in JSA’s, and other site safety reviews., • Complete all required ESHA training in a timely fashion., • Ensure equipment used in the extrusion process is operated properly and all safety mechanisms and guards are in place., • Understands how to handle machines properly during an emergency, which includes power outages, machine failure, workplace injuries, etc., • Follows plant safety procedures and guidelines; informs supervisor of safety issues; reports any workplace injury or incident immediately; wears and utilizes personal protective equipment (PPE) as required., • Mentors other machine operators and inspector-packers on safety procedures and guidelines., • Responsible for ensuring regulations and company quality procedures are followed in the performance of your job, • Responsible for maintaining good housekeeping in your work areas., • Responsible for maintaining all Quality documents assigned to your job are properly completed following our GMP & BRC standards., • Responsible completing all Quality training to maintain the ability to do your job following our SOPs., • Responsible for actively participating in GEMBA walks when called upon to do so., • Ensures that all products manufactured on assigned machines are within Company quality limits; immediately recognizes quality issues and acts; operates at or below Company scrap targets, • Ensures grinder is functioning properly The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: • Employees may be required to sit, stand, walk, reach with hands and arms, balance, stoop, kneel, crouch, or crawl., • Specific vision abilities required by this job may include close vision., • Must be physically capable of spending long hours outdoors or in a warehouse environment., • Ability to perform general to advanced machine maintenance, • Must be “fit for duty”., • I must be able to lift to 80 pounds at a time. Work Environment: Must be able to perform under the following conditions: • Work primarily production area without climate control, • Always Work safely., • Work occasionally in the warehouse, plant building, or outside plant area., • Able to occasionally work long hours without prior notice to assist the plant on urgent issues.

Job Description Injection Molding Operator I (Night Shift) 7AM-7PM $20.00/hr. + $1 Shift Differential Who we are looking for: We are currently searching for an Injection Molding Operator to be based out of Dallas, TX. Reporting to the Molding Manager, this Molding Operator’s primary focus will be tending the machines, packaging parts, basic material handling, and accomplishing daily production goals. What you’ll do: • Run various machines and equipment within the molding department, • Process and complete paperwork, and operate a forklift as required, • Progress towards a Molding Technician, where you’ll oversee preventative maintenance on machines, manage changing out tools and molds, and train Injection Molding Associates, • Follow plant safety rules and wear proper PPE, which includes safety glasses, ear plugs, steel-toe boots/shoes, and gloves, • Preferred is a high school diploma, or equivalent, • Experience reading and interpreting work orders, • Basic math and counting skills, • Ability to lift 35 pounds unassisted, • Have an attention to detail, accuracy, time management, and organization, • All associates must embrace and foster an environment that supports our core values of Integrity, Respect, Excellence, Teamwork and Accountability, • Complete hourly immersion and any required training., • Have a good understanding of our Safety Culture., • Have developed relationships with the key stakeholders for this role. As of the date of this posting, a good faith estimate of the current pay for this position is $20.00/hr. Placement in the range depends on several factors including, but not limited to, specific competencies, relevant education, qualifications, certifications, relevant experience, skills, seniority, performance, shift, travel requirements, and business or organizational needs and may change over time. Other compensation may include, but not limited to, overtime, shift differentials, bonuses, commissions, stock, and other incentives. Benefits available include: • Medical, vision, and dental insurance, • Life insurance, • Short-term and long-term disability insurance, • 401k, • Paid Time Off, • Paid holidays Applications are being accepted on an ongoing basis.

Job DescriptionDescription: Job Title: Golf Groundskeeper Dallas, Texas 75248 Job Summary: We are seeking a dedicated and skilled Golf Course Maintenance/Landscaper to join our team. The ideal candidate will have experience in maintaining golf courses, including mowing, managing bunkers, and ensuring the overall health of the greens. This role is essential in providing an exceptional playing experience for our members and guests. This position offers a flexible schedule during working hours from 6:00 a.m. to 6:00 p.m. Key Responsibilities: • Perform routine mowing of fairways, greens, and roughs to maintain optimal playing conditions., • Maintain and repair bunkers, ensuring they are in excellent condition for play., • Utilize trimmers and other landscaping equipment to enhance the aesthetics of the golf course., • Trims trees, prunes shrubbery, and cultivates shrubs and flowers., • Assist in the maintenance of irrigation systems to ensure proper watering of the greens and fairways., • Assists in the construction of new greens, tees, and fairways by grading, preparing soil, and planting, • Monitor the health of turf and plants, applying fertilizers and pesticides as needed., • Grades and prepares a soil plant bed, lays sod, plants vegetative material, and pulls weeds in the bed, • Collaborate with the greenskeeping team to implement maintenance schedules and practices., • Uphold safety standards and practices while operating equipment and performing maintenance tasks., • Operate powered equipment in mowing golf course putting greens, aprons, tees, and rough., • Change cups and tee markers Skills and Qualifications: • Previous experience in golf course maintenance or landscaping preferred., • Knowledge of turf management and horticulture practices., • Proficiency in operating landscaping equipment, including mowers, trimmers, and irrigation systems., • Strong attention to detail and ability to work independently or as part of a team., • Good physical stamina and ability to work outdoors in various weather conditions. Requirements: Education and Experience: • High School Diploma/GED preferred but not required, • Ability to work in a variety of weather conditions, • Ability to move heavy objects, • Be a team player and have a can-do attitude, • Ability to learn how to operate power equipment, including motorized mowing equipment, • Ability to report to work on time at 6:00 a.m. Medical, Dental, Vision, Paid time off, 401k, employee meals, and golfing privileges on Mondays.

Senior Operations Leader Location: Dallas, Texas Travel: Regional travel required Compensation: Strong executive package reflecting scope, leadership impact, and operational responsibility What’s in it for you? Take ownership of large-scale manufacturing and mining operations with the autonomy to influence performance, culture, and long-term operational strategy. This is an opportunity to lead complex 24/7 environments where safety, production, and commercial delivery are business-critical. Package / Benefits • Strong base salary with performance-linked bonus, • Executive-level benefits package, • Long-term progression into broader operational leadership, • Strategic visibility across multi-site operations, • Opportunity to shape operational excellence initiatives across plants and mining assets Why this business This opportunity sits within a globally respected industrial organisation operating across heavy manufacturing, mining, and materials processing. The business is investing heavily in operational performance, continuous improvement, sustainability, and leadership capability across multiple production sites. With a strong market position and established footprint, the organisation is focused on building high-performing operations that balance safety, reliability, cost control, and customer delivery. What you’ll be doing • Lead operational performance across plant, terminal, and mining environments with accountability for safety, production, maintenance, and cost control, • Drive continuous improvement initiatives focused on efficiency, reliability, operational uptime, and workforce capability, • Partner with commercial, logistics, technical, and corporate teams to align operational execution with wider business priorities, • Build and develop high-performing leadership teams while driving accountability, succession planning, and operational consistency across sites What you’ll bring • Proven leadership experience within cement, lime, aggregates, mining, quarrying, or other heavy industrial processing environments, • Strong operational and commercial understanding with experience managing budgets, KPIs, and plant performance within 24/7 operations, • Track record of leading multi-site manufacturing or mining teams through operational change and performance improvement, • Strong understanding of safety, environmental compliance, maintenance strategy, and operational best practices within heavy industry Who this suits You’re a commercially minded operational leader who thrives in complex industrial environments where performance, safety, and leadership credibility matter. You are comfortable balancing strategic priorities with hands-on operational decision-making and can influence teams across multiple sites. You’re likely already operating as a Plant Manager, Operations Director, Senior Operations Manager, or multi-site industrial leader and are looking for a role with broader visibility, operational influence, and long-term leadership opportunity. Call to action Apply now for a confidential conversation with Walker Lovell.

We are partnering with a growing food manufacturing organization to identify a highly driven Senior Food Scientist to support product innovation, formulation, and continuous improvement initiatives across a dynamic portfolio of food products. This role is ideal for someone passionate about food science, product development, and innovation within a fast-paced manufacturing environment. The selected candidate will collaborate cross-functionally with operations, quality, procurement, and commercial teams to develop and optimize products that align with quality, cost, and production goals. Key Responsibilities • Lead product development and reformulation initiatives from concept through commercialization., • Develop and optimize formulations, ingredients, and manufacturing processes to improve product quality, consistency, shelf life, and cost efficiency., • Conduct bench trials, plant trials, sensory evaluations, and product validations., • Partner with cross-functional teams including Quality Assurance, Operations, Supply Chain, and Marketing to ensure successful product launches and continuous improvement., • Analyze product performance, market trends, and competitor products to identify innovation opportunities., • Support scale-up activities and ensure products are manufacturable within operational capabilities., • Maintain accurate documentation related to formulations, specifications, testing, and process validations., • Collaborate with suppliers to evaluate ingredients, troubleshoot challenges, and identify alternative solutions when needed., • Ensure compliance with food safety, regulatory, and quality standards throughout all stages of development., • Manage project timelines and communicate progress effectively with key stakeholders. Qualifications • Bachelor’s degree in Food Science, Food Engineering, Chemistry, or a related field., • 4+ years of experience in product development, R&D, or food manufacturing environments., • Strong understanding of food formulation, ingredient functionality, food processing, and quality systems., • Experience working within manufacturing plants and production environments., • Strong project management, analytical, and problem-solving skills., • Excellent communication and collaboration abilities., • Self-starter with a curious and innovative mindset., • Bilingual English/Spanish is a plus., • Ability to travel up to 30% as required. Preferred Background • Experience within large-scale food manufacturing or consumer packaged goods (CPG) environments., • Exposure to process optimization, commercialization, or sensory science., • Passion for food innovation and emerging industry trends.

Job DescriptionDescription: Focus/Objective The Thermoforming Operator supports daily plant operations by safely and efficiently operating thermoforming equipment, mentoring fellow operators, and ensuring production, quality, and safety standards are consistently met. Job Duties and Responsibilities: • Operate one or two thermoforming machines under minimal supervision., • Adjust machine components to regulate speeds, pressures, and temperatures, dimensions, and material flow., • Monitors machine performance responds to alarms and malfunctions and perform advance troubleshooting., • Conduct machine adjustments (air pressure, vacuum, coolant flow, synchronization, etc.) to ensure proper operation., • Load raw materials, remove finished products, and deliver pallets to designated areas., • Achieve daily production output goals within established deadlines., • Enter daily utilization data into plant PCM and complete required paperwork (logs, condition sheets, checklists, locator cards)., • Perform and/or assist with preventive maintenance, cleaning, and machine adjustments., • Mentor and support new operators during onboarding; provide direction to inspector-packers as needed., • Notify supervisor immediately of any processing or maintenance issues., • Support continuous improvement efforts and assist with special projects as assigned. Minimum Position Qualifications/Requirements: • Strong organizational and problem-solving skills, • Detail oriented and commitment to follow through to completion., • Strong interpersonal skills; Strong team player, • Ability to work in a fast-paced environment., • Minimum 3-years forklift experience., • Prolonged periods sitting on a forklift., • Prolonged periods of standing, bending, and walking from one end of the building to the other., • Manufacturing experience preferred, • Integrity – Supports Governance and Compliance programs and company code of conduct. Maintains confidentiality; inspires respect and trust; does the right thing; reports potentially unsafe conditions; takes responsibility for own actions., • Teamwork – Works well in group situations; supports everyone’s efforts to succeed; contributes to building a positive team environment; shares expertise with others; is consistently on time at work..., • Communication – Balances listening and talking; speaks and writes clearly and accurately, influences others; communicates changes and progress; participates in meetings., • Respect for the individual – Shows respect and sensitivity for cultural differences; educates others on the value of diversity; focuses on solving conflict, not blaming., • Data & process-driven decision making – Applies design principles; quality problem solving; develops alternate solutions; develops realistic action plans; develops strategies to achieve organizational goals., • Urgency without frenzy – Generates creative solutions; manages competing demands or unexpected events; adapts strategy to changing conditions; prioritizes and plans work activities; sets goals and objectives., • Accountability – Takes ownership of work; does what is needed without being asked; follows through., • Takes responsibility for own actions; ensures work responsibility is covered when absent; observes safety and security procedures., • Continuous Improvement – Thinks of better ways to do things; understands the organization’s strengths and weaknesses; adapts to changes in work environment; ability to assess own strength and needs; strives to continuously build knowledge and skills. Preferred Skills/Qualifications & Education: • HS Diploma/GED, • 12 to 24 months of experience as a Forming Machine Operator or related experience, • Successfully completed all requirements from the respective Forming Operator Check sheet, • Ability to perform general to advanced machine maintenance, • Able to work in a fast-paced manufacturing environment, • Experience or ability in mentoring and training, • High School Diploma required., • Forklift CertificationRequirements: Environmental, Health & Safety Responsibilities: • Exemplify EE Dallas QB Inc.’s safety culture in everyday activities., • Gain a thorough working knowledge of EE Dallas QB Inc. Environmental, Safety & Health (ESH) policies and procedures., • Follow all EE Dallas QB Inc. facility and corporate ES&H procedures and practices., • Attend and actively participate in facility ESH meetings and forums that will drive employee involvement., • Participate in JSA’s, and other site safety reviews., • Complete all required ESHA training in a timely fashion., • Participate in any safety investigations when called upon to do so., • Ensure equipment used in the forming process is operated properly and all safety mechanisms and guards are in place, • Understands how to handle machines properly during an emergency, which includes power outages, machine failure, workplace injuries, etc., • Follows plant safety procedures and guidelines; informs supervisor of safety issues; reports any workplace injury or incident immediately; wears and utilizes personal protective equipment (PPE) as required., • Understands and performs Lock-out/Tag-out procedures and how to mentor this topic to other employees., • Ensures equipment used in forming process is operated properly and all safety mechanisms and guards are in place, • Understands how to handle machine properly during an emergency, which includes power outages, machine failure, workplace injuries, etc., • Follows plant safety procedures and guidelines; informs supervisor of safety issues; reports any workplace injury or incident immediately; wears and utilizes personal protective equipment (PPE) as required, • Mentors other machine operators and inspector-packers on safety procedures and guidelines, • Responsible for ensuring regulations and company quality procedures are followed in the performance of your job, • Responsible for maintaining good housekeeping in your work areas., • Responsible for maintaining all Quality documents assigned to your job are properly completed following our GMP & BRC standards., • Responsible completing all Quality training to maintain the ability to do your job following our SOPs., • Responsible for actively participating in GEMBA walks when called upon to do so., • Ensures that all product manufactured on assigned machine is within Company quality limits; immediately recognizes quality issues and takes action; operates at or below Company scrap targets, • Ensures grinder is functioning properly, • Assists with in-line inspection when necessary; completes any re-inspection that is ordered due to quality issues from assigned line, • Follows plant quality practices including Good Manufacturing Practices, or GMP’s, • Ensures grinder is functioning properly Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: • Employee may be required to sit, stand, walk, reach with hands and arms, balance, stoop, kneel, crouch, or crawl., • Specific vision abilities required by this job may include close vision., • Successfully completed all requirements from the respective Forming Operator Check sheet, • Must be physically capable of spending long hours outdoors or in a warehouse environment., • Ability to perform general to advanced machine maintenance, • Must be “fit for duty”., • Must be able to lift up to 60 pounds at a time., • Able to walk a minimum of 5,000 steps per day. Work Environment: • Must be able to perform under the following conditions:, • Work primarily production area without climate control, • Work safely at all times., • Work occasionally in the warehouse, plant building, or outside plant area.

Job Description Overview Founded in 1967, ImageFIRST® is the largest and only national linen rental and laundry service specializing in the healthcare market. Acquired by private equity firm Calera Capital in 2018, ImageFIRST serves medical facilities nationwide providing linen, patient gowns, scrubs, and more while managing their clients’ linen inventory for cost management. As leaders in infection prevention, they currently own and operate the most HLAC-accredited facilities in the industry. With one of the highest customer retention rates in the industry – 97% – ImageFIRST is dedicated to improving patient satisfaction and making staff happy with our white glove service! Check out our company page: Responsibilities Shifts: Monday - Friday First Shift: 3:00am-11:30am Second Shift: 12:30pm-9:00pm Pay: $16.50hr - $19.50hr RESPONSIBILITIES: The Custodian will be responsible for the maintenance of the facility or plant, and will provide assistance where needed. ESSENTIAL JOB RESPONSIBILITIES INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING: • Clean building floors by sweeping, mopping, scrubbing, or vacuuming them, • Gather and empty trash, • Service, clean, and supply restrooms, • Dust furniture, walls, machines, and equipment, • Provide light maintenance to equipment, • Move product as needed to facilitate production processes, • Daily equipment upkeep/safety inspections, • Keep production area & facilities clean and neat, • Perform basic routine maintenance on equipment, • Perform basic routine upkeep on facilities, • Responsible for communicating with other departments to assist with production, • High School Diploma or its equivalent, • Must be comfortable working around chemicals and other cleaning products, • Must have basic maintenance skills, • Must be comfortable working independently, • Ability to lift up to 30 pounds required, • Working conditions are normal for a manufacturing environment, • Work involves frequent lifting of materials up to 30 pounds, • Machinery and tool operation require the use of safety equipment to include but not limited to; eye safety glasses, hearing protectors, work boots, and hardhats;loose fitting clothes and jewelry are not permitted Qualifications Required Competencies: • Be Respectful: Value all we come in contact with, • Be Remarkable: Create a positive moment with every interaction, • Be Safe: Keep ourselves and those around us safe, • Weekly pay, • Medical, Dental, Vision, • Pet, Legal, and Hospital Indemnity Insurance, • 401k (match), • Paid Time Off Package, • Paid Parental Leave, • Tuition Reimbursement, • Referral Program, • Great company culture We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by applicable law. We are fueled by the talent, passion, and diversity of our associates.

Position Summary: National Compressor Services, an Industrial Service Solutions Company, is seeking a qualified Compressor Field Service Technician in Dallas, TX. As a Service Technician, you will perform preventative maintenance and troubleshoot the repair of industrial air compressors on site at client locations throughout the country, nationwide. Putting your mechanical expertise to the test, troubleshoot and resolve issues to ensure equipment is functioning properly and effectively. A typical repair project may be several days to couple of weeks. Your flexibility, responsiveness and technical knowledge is critical in effectively servicing our customer repair needs. Reporting to the Service Manager, use your problem-solving skills to diagnosis and fine-tune impurities to make certain the compressors are 100% functional. Your ability to correlate the small details of a system to the larger picture will enhance customer satisfaction! Essential Duties and Responsibilities: • Troubleshoot, diagnose, and repair industrial air/gas compressors on site at client locations., • Supervise or assist our customers’ union personnel maintenance crew (auto and steel plants), yet more directly involved at smaller non-union plants., • Analyze and problem-solve mechanical issues making certain overall system remains functional., • Effectively communicate with customer’s plant management team in explaining technical issues and solutions., • Perform point to point checkout, startup, and commissioning on assigned projects., • Utilize hand tools, laptop, and test equipment on site. Qualifications: • Experience with rotary screw compressors, reciprocating compressors, or centrifugal compressors is required., • Knowledge of industrial mechanics and electronic controls (PLC) is a plus., • Excellent interpersonal skills that represent the company in a professional manner with our customers., • Highly flexible with ability to work 50-hour work weeks and travel out of town 65%- 80%., • Computer savvy and able to run software test on equipment., • OEM experience and/or vocational education a plus., • Self-motivated with determination to complete projects to specifications., • Positive attitude with ability to adapt in demanding situations., • Familiar with OSHA/MSHA safety rules and regulations. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor.

Job DescriptionDescription: Focus/Objective The Thermoforming Operator Assistant will support the plant activities by assisting in the setup, operation, and maintenance of thermoforming machines to ensure efficient production. This role is responsible for staging materials, monitoring machine performance, troubleshooting issues, and maintaining production targets. The assistant will also handle roll changes, real-time scanning of roll labels, documenting downtime, and ensuring all required paperwork is completed. Additionally, they will support quality inspections, assist with in-line re-inspections, and uphold food safety and cleanliness standards. This position requires strong attention to detail, collaboration with the Operations team, and adherence to all company policies and procedures to maintain a safe and efficient work environment. Job Duties and Responsibilities: • Assist in setting up the machine to specifications outlined on the order., • Assist in setting up the machine to standard time and procedure., • Help operate the machine within standard production targets., • Assist in troubleshooting the machine when down or not performing to standard., • Assist maintenance with machine repairs and preventive maintenance., • Ensure correct roll specs are staged and change rolls as needed to keep Thermoforming lines in production., • Ensure the grinder is functioning properly., • Scan all roll labels in real-time to maintain accurate production tracking., • Record all downtime in the notebook kept at each line., • Ensure the CPM (cycles per minute) on the machine sign matches the machine’s actual CPM; if discrepancies occur, report the issue to the lead and collaborate with the Operations team., • Create partial labels and accurately note rejection labels., • Monitor and cover breaks/lunches for other operators to ensure machines are monitored at all times., • Complete all required daily paperwork, including cleaning checklists., • Assist with in-line inspection when necessary and complete any re-inspection required due to quality issues from the assigned line., • Assist as needed to keep the Thermoforming lines in production., • Adjust machine components to regulate speeds, pressures, and temperatures., • Continuously improving the process as an individual and as a team member., • Ensure the work area is kept clean according to facility and corporate standards, • Ensure all environmental standards and requirements are met., • Support and maintain all activities related to the Food Safety System, including machine cleaning schedules, checklists, and audits., • Achieve all production goals within established schedules and deadlines., • Perform any other duties assigned by the department manager. Minimum Position Qualifications/Requirements: • Strong organizational and problem-solving skill, • Detail oriented and commitment to follow through to completion., • Strong interpersonal skills; Strong team player, • Ability to work in a fast-paced environment., • 6 to 12 months of experience as a Thermoforming Machine Operator, or related experience., • Experience manufacturing, • Exemplify EE Dallas QB Inc.’s safety culture in everyday activities., • Gain a thorough working knowledge of EE Dallas QB Inc. Environmental, Safety & Health (ESH) policies and procedures., • Follow all EE Dallas QB Inc. facility and corporate ES&H procedures and practices., • Attend and actively participate in facility ESH meetings and forums that will drive employee involvement., • Participate in JSA’s, and other site safety reviews., • Complete all required ESHA training in a timely fashion., • Responsible for ensuring regulations and company quality procedures are followed in the performance of your job., • Responsible for maintaining good housekeeping in your work areas., • Responsible for maintaining all Quality documents assigned to your job are properly completed following our GMP & BRC standards., • Responsible completing all Quality training to maintain the ability to do your job following our SOPs., • Responsible for actively participating in GEMBA walks when called upon to do so. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: • Employee may be required to sit, stand, walk, reach with hands and arms, balance, stoop, kneel, crouch, or crawl, • Specific vision abilities required by this job may include close vision., • Must be physically capable of spending long hours outdoors or in a warehouse environment., • Prolonged periods of standing, bending, and walking from one end of the building to the other., • Must be “fit for duty”., • Must be able to lift up to 80 pounds at a time., • Must be able to perform under the following conditions, • Work primarily production area without climate control, • Work safely at all times., • Work occasionally in the warehouse, plant building, or outside plant area., • Able to occasionally work long hours without prior notice to assist the plant on urgent issues.