Plant jobs in Santa Ana, CaliforniaCreate job alerts

Job Description As a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • This is a part-time, graveyard shift position. The selected candidate may be required to report to various plant locations based on operational needs.Essential Functions:, • Drive truck safely and timely to location for unloading., • Drive truck under loading hopper to receive sand, gravel, cement, and water and starts mixer., • Move levers on truck to release concrete down truck chute into wheelbarrow or other conveying container or directly into area to be poured with concrete., • Perform all duties assigned by management in a timely manner., • Perform pre-trip and post-trip inspections of truck and reports repairs to personnel., • Assemble, disassemble, lift, and carry chutes., • Clean truck after delivery to prevent concrete from hardening in mixer and on truck., • Maintain a clean vehicle, always cleaning it while on duty (spray surfaces of truck with water and protective compounds for cleaning purposes), on company time., • Monitor trucks and other company equipment to ensure appearance, safety, and proper maintenance levels., • Maintain accurate work and driving records of daily activities., • Assist in yard functions, lifting materials and operating yard equipment., • Able to communicate effectively with other staff., • Able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Preferred Education and Experience • Possession of a valid unrestricted California Commercial Driver License (Group A or B) and comply with Department of Transportation regulations., • Must have Air Brake and Tanker Endorsement and a safe driving record., • Knowledge of road construction materials, road construction processes and industry. requirements. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, e r protection, gloves, and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individual must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Job Description As a valued member of our team, you will be working for our well-established, medium-sized construction materials company with multiple production plants throughout California. The Ready-Mix Driver is responsible for driving a truck equipped with a concrete mixer to deliver concrete mix to job sites. The role requires the driver to operate the truck in a safe and efficient manner, following and adhering to all applicable Federal & State laws. • Paid training is available for candidates that have a Class A or B license with air brake and tank endorsements with no automatic restrictions., • Starting pay is $31.00 per hour after paid training. Benefits:, • PPO/HMO Health Insurance, Medical, Dental, Vision, Life, • PTO (Paid Time Off), • 401k Retirement Plan, • Overtime pay, • Direct Deposit, • Training Program, • Strong Safety Program, • Employee Assistance Program, • Employee Referral BonusEssential Functions:, • Drive truck safely and timely to location for unloading., • Drive truck under loading hopper to receive sand, gravel, cement, and water and starts mixer., • Move levers on truck to release concrete down truck chute into wheelbarrow or other conveying container or directly into area to be poured with concrete., • Perform all duties assigned by management in a timely manner., • Perform pre-trip and post-trip inspections of truck and reports repairs to personnel., • Assemble, disassemble, lift, and carry chutes., • Clean truck after delivery to prevent concrete from hardening in mixer and on truck., • Maintain a clean vehicle, always cleaning it while on duty (spray surfaces of truck with water and protective compounds for cleaning purposes), on company time., • Monitor trucks and other company equipment to ensure appearance, safety, and proper maintenance levels., • Maintain accurate work and driving records of daily activities., • Assist in yard functions, lifting materials and operating yard equipment., • Able to communicate effectively with other staff., • Able to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. This is a full-time position. Hours of work may vary at plant or other location. Not eligible for remote work. Must be available 6 days a week and to work overtime as job duties demand. Travel Required: Yes Preferred Education and Experience • Possession of a valid unrestricted California Commercial Driver License (Group A or B) and comply with Department of Transportation regulations., • Must have Air Brake and Tanker Endorsement and a safe driving record., • Knowledge of road construction materials, road construction processes and industry. requirements. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Physical Demands and Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts, hazardous chemicals, outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, fumes or airborne particles, extreme heat and risk of electrical shock and elevated noise levels. Employees must wear the required personal protective equipment; up to and including safety vest, hard hat, e r protection, gloves, and safety glasses. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit for extended periods of time. The employee frequently is required to use hands to finger, handle or feel and reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, crawl, talk or hear. The employee regularly assembles, disassembles, lifts, and carries chutes that can weigh up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Individual must be able to pass a pre-employment physical and drug screen. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify Associated Ready Mixed Concrete is an EEO/AA (equal opportunity/affirmative action) company and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Press Operator is an essential member of the team, responsible for the manufacturing of printed labels while continuously monitoring label quality and press conditions. Why work at MCC: • Compensation: $24.60 - $36.50 hourly, • Up to $2500 New Hire Bonus, • Our Printing Press Operators must adhere to all plant and corporate safety rules, procedures, and guidelines., • Reports all safety concerns or issues to their immediate supervisor., • Maintains a clean and safe work environment and area by completing daily housekeeping assignments., • Completes make-ready in accordance with the Job Ticket and Product Specification documents to ensure correct print cylinders, inks, substrates, tooling, and anilox rollers are used., • Responsible for completing all required quality checks related to product specifications, visual, and functional checks. Completes all press-side quality checks., • Operates press to produce product in accordance to customer specifications while maintain quality, waste, and press efficiency., • Maintains consistent quality during the production run. Critical quality checks includes: copy, color, and registration, and ink adhesion. Ensure conformance to all other quality checks., • Responsible for completing all related procedures, work instructions, and quality measurements as outlined in the BRC standard., • Completes press make ready’s in an efficient manner., • Completes all required equipment maintenance duties., • Cleans plate, cylinder, and ink pans, and lubricates press as needed., • High school diploma or GED., • 1+ years as a printing press operator experience and/or training. #FULIND For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world’s most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ___. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ___. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Job Description Well established electronic contract manufacturer, Golden West Technology, is looking for a Test Technician to work in its industrial products assembly area. Entry level pay scale would be $19 based on experience and skills. 401k and Blue Shield health plan eventually available to full-time employees. We are looking for these qualities in prospective candidates: *Team player no doubt *be able to read and interpret assembly instructions *be detail oriented and organized *be flexible and work in a fast paced environment and possess further skills below: *functional test experience and has some ability to troubleshoot failed boards/finished products *be familiar with practical use of test equipment and its measurements *be able to read, interpret and record proper data and findings Work hours are 7am to 3:30 pm with occasional opportunity for more OT hours Come Visit our plant at 1180 E Valencia Drive, Fullerton 92831 and ask for interview with Kathe/Scott Company DescriptionWell established electronic contract manufacturer, Golden West Technology, has been in business for over 48 years. We serve the Medical, Industrial and Aerospace/Defense markets. Office hours are 8am to 5pm, our shop is open 7am to 3:30 pm for main shift but on temp basis one shift is working 6am to 2:30... Our plant is located at 1180 E Valencia Drive, Fullerton CA 92831, interviews by appointment only after pre-screening.Well established electronic contract manufacturer, Golden West Technology, has been in business for over 48 years. We serve the Medical, Industrial and Aerospace/Defense markets. \r\nOffice hours are 8am to 5pm, our shop is open 7am to 3:30 pm for main shift but on temp basis one shift is working 6am to 2:30...\r\nOur plant is located at 1180 E Valencia Drive, Fullerton CA 92831, interviews by appointment only after pre-screening.

Description Sr. Security Engineer ABOUT GOLDEN STATE FOODS Golden State Foods is a distinguished leader in the foodservice industry, offering an extensive array of products and services to a diverse clientele. Rooted in the values of quality service and integrity, we are dedicated to creating a supportive and inclusive atmosphere where employees can advance, innovate, and contribute to our ongoing success. ABOUT THE JOB The Security Engineer for Golden State is someone who lives in the alerts, understands attacker behavior, and knows how to turn security tooling into real-world protection. This is a hands-on role focused on detection, response, and security engineering. This is not a policy or paperwork role — this is about building, tuning, and responding. Success in this role requires an individual who is organized, assertive, resourceful, and an excellent communicator. WHAT YOU'LL DO Network Security • Monitor network security controls across IT and OT environments, • Audit firewalls, IDS/IPS, VPNs, and network segmentation, • Analyze network traffic and packet captures to identify suspicious or malicious activity, • Improve visibility into east-west traffic and lateral movement, • Support secure remote access into manufacturing and plant environments SOC, Detection & Response • Partner with the SOC and EDR provider on alerts and incidents, • Improve network-based detections across SIEM, IDS/IPS, and EDR telemetry, • Support incident response activities, including containment and remediation EDR, SIEM & Threat Hunting • Leverage EDR and SIEM to investigate network-adjacent attacker activity, • Build and tune SIEM detections for new IoC/IoA’s WHAT YOU'LL NEED • Hands-on security or network security experience, • Very strong network fundamentals, including:, • TCP/IP, routing, switching, and network architectures, • Firewalls (Palo Alto, Fortinet, Cisco, etc.), • VPNs and remote access technologies, • Ability to analyze packet captures and network logs with confidence, • Experience supporting or working closely with SOC operations, • Strong troubleshooting mindset and comfort working live incidents, • Experience with OT or industrial networks (PLC, SCADA, manufacturing), • Exposure to penetration testing or adversary simulation, • Experience with IDS/IPS, NetFlow, or NDR tools, • Scripting or automation skills (Python, PowerShell) Education & Experience • Four-year college preferred or commensurate work experience., • Cybersecurity related certification desired Experience • Previous experience as a cybersecurity engineer, • Previous experience as a client/server or infrastructure engineer PAY & BENEFITS • Pay Range (Base Pay): $130,000 - $160,000, • Other Compensation: May include shift differentials, overtime pay, bonuses, or other incentive pay as applicable to the position and location., • Health & Wellness: Medical, Dental, Vision, Disability, Health and Dependent Care, Reimbursement Accounts (FSA), Employee Assistance Program (EAP), Voluntary Insurance (Accident, Critical Illness, Hospital Indemnity, Legal, Life, AD&D); Pet Insurance, • Retirement Benefits: 401(k), • Paid Time Off (PTO): Includes vacation, sick leave, and paid company holidays provided in accordance with company policy and applicable state and local laws. To apply, click "Apply" and complete the online application. WHAT YOU’LL GET • People First: At Golden State Foods, we're not just a company; we're a dynamic community where your talents are celebrated, and your ambitions are nurtured., • Values Driven: Our core values drive everything we do, creating a culture of innovation, integrity, and excellence. But we're not content with just being great; we strive for greatness in every aspect of our work., • People Development: At GSF we strive to continually develop our people to prepare us all for the needs of tomorrow., • Philanthropy & Sustainability: We're committed to making a difference beyond our walls through philanthropy and sustainability efforts across all our locations around the globe. Equal Opportunity Employer: We’re proud to be an equal opportunity employer. Golden State Foods values diverse perspectives and is committed to creating an inclusive workplace where every person can thrive - respected, supported, and empowered. We believe diversity, in every form, strengthens our team and our communities.

Here, we craft excellence together. Your mission? Making the journey the most enjoyable part of the trip. Join our first-class team to reinvent in-flight experience. In the role of Planning Supervisor, you'll play a pivotal part on our production team. The Aftermarket Planning Supervisor will lead and manage a team of spares planners within the aftermarket division of a global aerospace manufacturing company. This role is dedicated to ensuring operational excellence in aftermarket planning, scheduling, and inventory management. With a strong focus on aerospace spares support, the Supervisor will oversee queue management, KPI performance, and daily planning execution to meet customer requirements. The position plays a key role in ensuring the accuracy of data in the business system, which directly impacts company-wide financial reporting and aftermarket customer satisfaction. • Lead, mentor, and supervise a team of spares planners in the aerospace aftermarket division, ensuring high performance, accountability, and alignment with organizational goals., • Implement and maintain world-class strategies for aftermarket planning, scheduling, inventory, and customer satisfaction, while driving continuous improvement across all functions., • Oversee all aftermarket planning activities, including workload balance, prioritization, and queue management for PPO, initial commitment dates and recovery dates, ensuring accuracy, timeliness, and ownership of all lines., • Drive daily execution of key aftermarket KPIs including PPO release adherence, initial commitment dates and recovery date creation, and PMO release compliance. Monitor individual performance, flex resources to balance changing workloads, and lead cross-functional efforts to resolve the highest aging lines., • Act as the first line of escalation for planning and operational issues, providing rapid problem-solving support to both the team and internal stakeholders., • Maintain and update weekly KPI charts for Tuesday management reports, providing analysis and insights while the Manager presents. Transition ownership of additional metrics (supply cancellations, pull-ins, pushouts, NCR, etc.) from Manager to Supervisor over time., • Develop and monitor aftermarket production plans, budgets, and schedules in line with aerospace requirements and plant capacity. Proactively identify risks or delays and implement corrective actions to protect customer commitments. But what else? (advantages, specificities, etc.) • Ensure planners execute essential functions including BOM analysis, material planning, timely requisition delivery to purchasing, work order release and management, revision control, ERP data accuracy, and on-time fulfillment of aftermarket customer requirements., • Oversee inventory levels to meet company and aftermarket customer goals, ensuring alignment with financial targets and operational needs., • Foster premier customer service for airlines, MROs, and other aerospace aftermarket clients by ensuring planning execution supports client expectations., • Conduct risk assessment and mitigation activities specific to aftermarket supply chain challenges., • Provide leadership through training, mentoring, and talent development, driving a culture of accountability, collaboration, and professional growth within the spares planning team., • Execute strong working knowledge of MRP/ERP systems and other applicable planning tools, leveraging aerospace expertise to optimize performance., • Collaborate with supply chain, operations, engineering, and quality teams to ensure aftermarket planning alignment with aerospace manufacturing standards and long-term business objectives., • Other duties as assigned by the management team. Candidate skills & requirements Education: BS/BA degree required from an accredited university Experience: Minimum of 7+ years of progressive planning, scheduling and inventory management experience in aerospace, automotive or mechanical manufacturing environment with the ability to lead and influence others, with 2+ years of the 7 years in a planning leadership position Computer Skills: • Experience working with MRP/ERP systems, • Proficiency with MS Office Skills (Excel, Word, PowerPoint, Outlook) Other Skills: • Broad knowledge of the field with proven management skills., • Effective oral and written communications skills, • Demonstrated ability to handle multiple projects and assignments with attention to detail, • Problem solving, well organized, detailed oriented and accurate., • Strong written and verbal business communications abilities must be comfortable delivering information to all levels of the organization including senior leadership., • Working knowledge of business finance skills and abilities. Additional Preferred Skills: (not required) • BS/BA in supply chain, business management, or operations from an accredited university, • APICS CPIM and/or ISM certifications, • Experience in AS/ISO standards quality management experience., • Problem-solving skills (Six Sigma Green Belt, etc.), • Aftermarket or Spares Business experience Description: Entry-level management position within field.

• At least 7+ years of strong hands‑on experience with Solumina OR Solumina G8 MES: Manufacturing routings, Work orders, Shop floor execution, Serialization, genealogy, and traceability, • Manufacturing execution processes, Discrete manufacturing environments, • Experience in Java / J2EE–based MES architecture, Oracle / SQL databases, WebLogic / application servers, • Monitor MES system health, batch jobs, interfaces, and background services., • Implement minor to medium MES enhancements based on business needs., • Support change requests (CRs), system upgrades, and patches for Solumina G8., • Diagnose and resolve production issues related to routing, work orders, genealogy, NCRs, and shop floor transactions., • Perform root cause analysis (RCA) and implement permanent fixes., • Support plant operations during production incidents and critical manufacturing windows., • Support integration between Solumina MES and ERP/PLM/QMS/PLC/Shop Floor Machine Interfaces, • Monitor and resolve interface issues, data mismatches, and transaction failures., • Ensure data accuracy for production orders, BOMs, and manufacturing records., • Ensure MES processes support regulatory and quality requirements (AS9100, ISO, FAA, etc., where applicable)., • Support audits by providing Solumina reports, logs, and traceability records., • Maintain technical and functional documentation Configuration documents, SOPs, Support runbooks, Interface specifications, • Work closely with Manufacturing engineers, Quality teams, IT infrastructure teams and Parker Plant Stakeholders, • A&D Experience preferred. Familiarity with industrial, or regulated manufacturing environments preferred.

Maintenance Technician Location: Placentia, California Are you an experienced Maintenance Technician ready to support complex manufacturing equipment in a fast paced aerospace environment? Do you take pride in diagnosing faults and keeping machinery operating safely and efficiently? Are you looking to join a company known for long term stability? If so, this opportunity may be the right next step for you. Our client, is a leading designer and manufacturer of aircraft latches and latching systems. With over 80 years of aerospace heritage, they supply high performance components across commercial, military, and space programmes. Their strong reputation and sustained growth create genuine opportunities for development and long term careers. This role offers a collaborative culture with opportunities to grow and progress throughout the organisation. Employees benefit from long term stability built over decades of aerospace service, alongside competitive compensation, benefits, and paid vacation. The Maintenance Technician will play a key role in ensuring plant machinery, equipment, and facilities remain operational and safe. Working with limited supervision, the Maintenance Technician will use technical knowledge, manuals, and drawings to maintain machinery, troubleshoot issues, and support day to day operations across the facility. As the Maintenance Technician your responsibilities will include • Perform repair, maintenance, and overhaul work on plant machinery, machine tools, vehicles, and facility systems, • Diagnose and repair CNC electronic controls and related equipment using technical manuals and layouts, • Carry out electrical, carpentry, plumbing, and mechanical tasks to maintain plant infrastructure, • Install and repair motors, cabinets, and supporting equipment across the facility, • Provide technical guidance and support to junior maintenance personnel As the Maintenance Technician you will bring • Eight to ten years of maintenance trade experience including work on electronic systems, • Proven ability to interpret blueprints, manuals, and technical instructions, • Strong mechanical aptitude with the ability to use hand tools and machinery safely, • Experience performing multi trade maintenance including electrical, mechanical, and plumbing work, • Excellent hand eye coordination and the ability to perform detailed diagnostic work This Maintenance Technician opportunity is suited to individuals who enjoy varied technical challenges and maintaining reliable production operations. The Maintenance Technician will work across machinery and facility systems, ensuring safe and efficient performance in a demanding manufacturing environment. All successful applicants will be contacted within two working days.

• At least 7+ years of strong hands‑on experience with Solumina or Solumina MES Manufacturing routings, Work orders, Shop floor execution, Serialization, genealogy, and traceability, • Manufacturing execution processes, Discrete manufacturing environments, • Experience in Java / J2EE–based MES architecture, Oracle / SQL databases, WebLogic / application servers, • Monitor MES system health, batch jobs, interfaces, and background services., • Implement minor to medium MES enhancements based on business needs., • Support change requests (CRs), system upgrades, and patches for Solumina G8., • Diagnose and resolve production issues related to routing, work orders, genealogy, NCRs, and shop floor transactions., • Perform root cause analysis (RCA) and implement permanent fixes., • Support plant operations during production incidents and critical manufacturing windows., • Support integration between Solumina MES and ERP/PLM/QMS/PLC/Shop Floor Machine Interfaces, • Monitor and resolve interface issues, data mismatches, and transaction failures., • Ensure data accuracy for production orders, BOMs, and manufacturing records., • Ensure MES processes support regulatory and quality requirements (AS9100, ISO, FAA, etc., where applicable)., • Support audits by providing Solumina reports, logs, and traceability records., • Maintain technical and functional documentation Configuration documents, SOPs, Support runbooks, Interface specifications

About the Company The General Manager will report directly to the area Vice President of Operations and General Manager. The General Manager is responsible for the daily direction and leadership of the manufacturing process. He or She will be working closely with the entire plant leadership team to ensure customer demand, quality, and delivery schedules are met. The General Manager will be an active and highly contributing member of the site leadership team that has a strong commitment to safety and environmental performance and creating teams which self-identity with Novaria core values. About the Role The candidate must be an excellent team builder and player capable of running the day-to-day entity while ensuring customer confidence. He or she will be committed to creating growth and manufacturing capability, delivering financial performance results, continuously improving products and processes, and developing talent. He or she will contribute to the leadership team in creating strategic vision and a culture of delivering performance via agreed upon KPI’s. Responsibilities • Develop P&L leadership experience by working closely with VP/GM and Controller during monthly financial reviews and annual budgeting process, • Behave as a facilitative leader and a learner, • Support the development and execution of on time delivery projects to generate high customer satisfaction, • Leads and facilitates improvement teams, workshop teams, and individual improvement projects aligned with plant or department priorities., • Champion initiatives to improve key operational metrics, including On-Time Delivery (OTD), first-pass yields, productivity improvement and efficiency., • Lead the daily management of the business through visible Key Performance Indicators (KPIs), focusing on Safety, Quality, Delivery, and Cost (SQDC)., • Champion the Acra culture with a positive, engaged, and infectious attitude, creating a highly collaborative and accountable environment, • Stay on the leading edge of automation and technical solutions that can be applied within our environment, • Lead various process improvement assignments and projects that yield bottom-line productivity, improved throughput, and better quality, • Lead all EHS, Safety, and Training initiatives from the front. You are the site's chief safety officer, responsible for ensuring 100% compliance and awareness., • Drive a "zero defect" quality mindset, ensuring rigorous contract review and root-cause corrective action (RCCA) to reduce and eliminate RMAs, while minimizing labor variance and material scrap., • Provide thought leadership to location teams in areas of process technology, automation, and lean manufacturing, • Leverage communications to recognize best practices, excellent delivery, and exceptional results, • Develop and execute small and broad projects to implement throughput and yield improvements within operations., • Operate with a high degree of autonomy and professionalism and prioritize workload in accordance with business goals Qualifications • 10 or more years’ manufacturing experience. A minimum of 5 years in Management in a manufacturing environment with CNC Mills and Lathes producing Aerospace products, • Demonstrated data-driven approach to decision making, • Job related experience process improvement or project management experience; chemical processing experience (preferred) Required Skills • Bachelor's degree in a STEM subject (B.S. Degree in Manufacturing Engineering, and/or Mechanical Engineering desired but not required) from a four-year college or university or a minimum of 10 years related experience and/or training., • Learns and practices Lean tools and techniques (DMAIC, PDCA, root cause analysis, risk assessment/FMEA, kaizen), • Proven track record of implementing change and driving operational improvements in a high-mix, low-volume manufacturing environment, with deep experience in Lean Manufacturing, or other Continuous Improvement methodologies, • Demonstrated experience and success in the implementation and management of process efficiency metrics (OEE), process mapping, budgeting, and production standards, • CNC Machining experience with Aerospace materials and applications. Knowledgeable and experienced with tight-tolerance 5-axis milling and Swiss-style turning., • Supports and facilitates adoption of best practices to eliminate waste and improve performance for assigned plant or function, • Ability to effectively manage expectations across different functional groups and levels, • Takes ownership, shows accountability and urgency, • Professional, positive, and can-do attitude, • Strategic, critical thinker, analytical and strong business acumen skills, • Adequate knowledge of MS Office Suite, and collaboration tools such as Zoom or MS Teams Preferred Skills • Job related experience process improvement or project management experience; chemical processing experience (preferred) Equal Opportunity Employer We are proud to be an equal opportunity employer committed to building a diverse and inclusive workplace. We do not discriminate on the basis of race, color, religion, sex, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or any other legally protected characteristics. We believe that diversity and inclusion drive innovation and strengthen our organization.

Buyer Administrator Pay rate: $22-$25/hr Location: Irvine, CA (onsite) Schedule: 8am - 5pm Position Summary The Buyer Administrator provides day-to-day administrative support to the Purchasing/Supply Chain team by: • Maintaining procurement master and transactional data accuracy in the ERP/administrative system, • Coordinating indirect purchasing workflows (RFQs, quote collection, PO creation), • Managing supplier compliance recordkeeping and routine supplier follow-up Key Responsibilities: Procurement & System Administration • Maintain and update purchasing-related master and transactional data in the ERP/administrative system, including lead times, promise dates, and related supply parameters., • Coordinate with suppliers & buyers to ensure system information reflects current supplier commitments and supports on-time delivery performance., • Track and follow up on missing or incomplete supplier information required to keep orders and schedules current. Indirect Purchasing Support • Support indirect purchasing activities, including: o Sending RFQs to suppliers. o Collecting, organizing, and reviewing quotes for completeness, including pricing, lead time, terms, validity, freight, and applicable surcharges. o Supporting potential negotiations by preparing comparisons, documenting supplier responses, and highlighting exceptions. o Creating and placing indirect purchase orders in the ERP/procurement system per approved sourcing decisions. • Ensure purchase orders are accurate and include required details: o Part/service descriptions, quantities, delivery dates, ship-to, terms, and required attachments. Supplier Compliance Recordkeeping • Proactively request, track, and file updated supplier documentation, such as: o Supplier Business Questionnaires o Reps & Cert packages (as applicable) o Certifications and compliance packages (e.g., quality, regulatory, or other required documents) • Follow up with suppliers to ensure documentation remains current and complete. Supplier Communication & Follow-Up • Serve as a point of contact for routine supplier communication related to quotes, promise dates, and documentation requests., • Request suppliers to populate/confirm key order information., • Follow up on overdue quote responses, missing confirmations, and outstanding compliance packages., • Document communications and maintain organized records to support buyer decision-making and compliance. Required Qualifications • 1+ years of experience in procurement administration, purchasing support, supply chain coordination, or a related administrative role., • Experience working with suppliers to obtain quotes, confirmations, and required documentation., • Proficiency in Microsoft Office (Excel, Outlook, Word); ability to create and maintain trackers, comparisons, and organized records., • Strong attention to detail and commitment to data accuracy; ability to manage multiple requests and deadlines., • Clear, professional written and verbal communication skills. Preferred Qualifications • Experience with ERP/procurement systems (e.g., SAP, Oracle, JD Edwards, or similar)., • Familiarity with indirect purchasing (MRO, services, office/plant supplies, contracts) and basic purchasing terms., • Experience supporting compliance documentation processes (supplier questionnaires, certifications, quality/regulatory documentation).

Position Summary The Buyer Administrator provides day-to-day administrative support to the Purchasing/Supply Chain team by: • Maintaining procurement master and transactional data accuracy in the ERP/administrative system, • Coordinating indirect purchasing workflows (RFQs, quote collection, PO creation), • Managing supplier compliance recordkeeping and routine supplier follow-up Key Responsibilities Procurement & System Administration • Maintain and update purchasing-related master and transactional data in the ERP/administrative system, including lead times, promise dates, and related supply parameters., • Coordinate with suppliers & buyers to ensure system information reflects current supplier commitments and supports on-time delivery performance., • Track and follow up on missing or incomplete supplier information required to keep orders and schedules current. Required Qualifications • 1+ years of experience in procurement administration, purchasing support, supply chain coordination, or a related administrative role., • Experience working with suppliers to obtain quotes, confirmations, and required documentation., • Proficiency in Microsoft Office (Excel, Outlook, Word); ability to create and maintain trackers, comparisons, and organized records., • Strong attention to detail and commitment to data accuracy; ability to manage multiple requests and deadlines., • Clear, professional written and verbal communication skills. Preferred Qualifications • Experience with ERP/procurement systems (e.g., SAP, Oracle, JD Edwards, or similar)., • Familiarity with indirect purchasing (MRO, services, office/plant supplies, contracts) and basic purchasing terms., • Experience supporting compliance documentation processes (supplier questionnaires, certifications, quality/regulatory documentation).

We're seeking an experienced IT Project Manager for an exciting opportunity leading and coordinating cross-functional teams to deliver a complex, mission critical ERP implementation to streamline and optimize business operations. PMs need overall 10+ years of experience that includes 3 years of ERP experience with 1 or more end-to-end implementation or migration project. Experience with Oracle Fusion, Finance, PLM and HCM is highly desirable. Overview • Duration: 6 month to start, extendable, • Start: Immediate, • Location: Local to Irvine, CA (5 days/week onsite with flexibility), • Compensation: Starting at $75/hr W2 plus benefits; W2 contract only, no C2C IT PM ensures the successful execution of this ERP initiative by managing scope, schedules, budgets, resources, and risks, while delivering measurable results aligned with the company goals. • Works collaboratively with internal stakeholders, external vendors, and IT teams, balancing company needs with IT capabilities to achieve efficient and effective outcomes., • This role is critical in ensuring the consistent delivery of high-quality projects that enhance company operations and strategic initiatives., • Will partner closely with senior leadership and department heads while demonstrating project ownership through implementation and post-go-live support. Primary Responsibilities • Manage and oversee the execution of projects from initiation to closure, ensuring adherence to scope, budget, and schedule., • Develop and manage project plans, schedules, and budgets for IT initiatives., • Define project scope, goals, and deliverables in collaboration with stakeholders., • Monitor project progress, milestones, and risks to ensure successful delivery., • Coordinate cross-functional teams to ensure clear communication and alignment of project objectives., • Conduct regular project status meetings and provide routine updates to stakeholders and senior leadership, highlighting key milestones, issues, risks, and achievements., • Ensure adherence to PMO policies and best practices., • Coordinate vendor selection and evaluation processes, including demos, comparisons, and implementation timelines., • Oversee project financials, ensuring visibility into budgeting, forecasting, and performance against plan., • Manage vendors and hold them accountable for their delivery activities., • Capture lessons learned, promote continuous improvement, and obtain final project approvals., • Facilitate change requests to ensure approval and alignment on the impacts of change on scope, schedule and budget., • Coordinate resources across multiple teams, including IT, business units, and external vendors and contractors, to ensure optimal utilization and project success., • Prepare and deliver executive-level presentations to communicate project progress, outcomes, and strategic recommendations. Knowledge And Skills • General understanding of information technology environments, with emphasis on ERP applications, and integrated systems., • Solid understanding of software development practices, methodologies, tools, and quality processes., • Ability to maintain quality standards while working in a high-volume, fast-paced environment, • Excellent written and verbal communication skills at a C Suite level, • Solid organizational skills including attention to detail and multitasking skills, • Collaboration with stakeholders to understand business needs, processes, and data sources., • Able to identify and coordinate cross-project dependencies. Education and Experience: • Bachelor’s degree preferred, advanced degree highly desirable, • 10+ years’ experience managing enterprise technology projects, initiatives and implementations / integrations., • At least 3 years of experience managing enterprise ERP systems implementations / integrations such as Oracle ERP, JDE, or SAP, • Experience with other technologies such as Salesforce, MuleSoft and Snowflake are a plus., • Experience in Manufacturing, Plant Operations, Commercial Products, Supply Chain a plus, • PMI or other project management experience and certifications are a plus, • Proficiency in computer applications such as Microsoft Word, Excel, and PowerPoint, • Advanced Proficiency in Microsoft Project, ServiceNow or similar planning tool Please apply today!

Our client is a trusted name in the bakery and snack space for over a century! With continued growth and investment, they’re looking for an EHS Manager who can go beyond compliance and help build a culture where safety is embedded into every decision. This is your opportunity to step into a role where your voice is heard, your ideas are implemented, and your impact is visible. You’ll serve as the site’s safety leader, partnering closely with plant leadership and influencing operations at every level. From leading initiatives to coaching teams, you’ll help shift the mindset from reactive to proactive safety. What You’ll Be Doing • Driving the evolution of EHS programs and culture, • Partnering with leaders to integrate safety into daily operations, • Leading investigations that uncover root causes, not just symptoms, • Ensuring compliance while pushing for continuous improvement, • Preparing teams to respond confidently in emergency situations, • Developing people and building long-term capability What Makes You a Fit • Strong foundation in EHS within food/beverage manufacturing, • Experience leading at the plant level, • Deep understanding of OSHA & CAL OSHA, • A leader who is just as comfortable on the floor as in strategy sessions, • Someone who leads through influence, presence, and credibility What We’re Looking For • Bachelor’s degree or equivalent experience, • 5–10+ years of EHS experience within food or beverage manufacturing, • Proven experience leading EHS at the plant level (5+ years in a leadership role), • Strong working knowledge of OSHA regulations and compliance programs, • Experience with Cal/OSHA, • A hands-on leader who can be both strategic and visible on the floor, • Strong communicator who can influence at all levels—from operators to senior leadership Salary range: $110,000 - $140,000, bonus opportunity, health, dental and vision insurance, 401(k) matching, life insurance, paid time off and company holidays provided. *This compensation range reflects the company's expectations for this position at the time of posting. Actual pay will be determined based on factors such as relevant experience, alignment with role responsibilities, education, demonstrated skills, and performance during the interview process.

Job Description Job Summary The Human Resources Generalist is responsible for leading and executing day-to-day HR functions at the assigned Sunny Sky Products (SSP) manufacturing plant(s). This role partners closely with plant leadership to foster a high-performance culture built on our Core Principles, ensuring best-in-class programs for team members. Key responsibilities include talent acquisition, employee relations, training and development, safety leadership, compliance, and benefits administration. The HR Generalist plays a critical role in building an engaged, high-performing workforce while ensuring adherence to all legal, regulatory, and company policies. Major Job Functions • Collaborate with plant manager and department leaders to understand plant priorities and develop HR strategies that support the plant goals. Advise managers on workforce planning, succession planning and talent pipeline development., • Serve as a trusted advisor for employee relations, coaching leaders on conflict resolution, performance management, and disciplinary actions., • Partner with plant leaders to strengthen employee engagement and reinforce organization culture., • Facilitate performance management processes, including goal setting, reviews and development planning. Support leadership development, training initiative and career pathing efforts., • Serve as the first point of contact for employees’ questions regarding policies, benefits and procedures. Support the resolution of employee issues, escalating as needed., • Ensure compliance with GMPs, federal, state, and local employment laws and regulations., • Serves as a champion for safety initiatives, promoting a strong safety culture., • Participate in the recruiting process for all local positions including interviewing, hiring, and onboarding qualified candidates in collaboration with department managers., • Partner with recruiting to ensure pre-employment processes, background checks, and eligibility verifications are completed accurately and on time., • Enhance job satisfaction by resolving issues promptly, applying new perks and benefits and organizing culture building activities, • Execute new hire orientation and employee recognition programs. Recommend improvements with a focus on our Core Principles., • Maintains knowledge of trends, best practices, regulatory changes, and new technologies in human resources, talent management, and employment law., • Deliver HR/Safety training programs and materials to educate employees and managers, • Bi-lingual Spanish required., • 5 years in a Human Resources Generalist role supporting a small organization and 3 years specific state, • Excellent interpersonal, negotiation, conflict resolution, analytical and problem-solving skills required., • Attention to detail & organizational skills required., • Through knowledge of employment-related laws and regulations specific to the state the position is located., • Proficient with Microsoft Office Suite or related software., • Proficiency with HRIS and talent management systems, experience with UKG preferred., • Bachelor’s degree in human resources, business administration, or a related field required., • SHRM certification a plus.

POSITION SUMMARY: The Tree Inventory Specialist provides support to the sales team at Great Scott Tree Care. This is an exempt position as classified under the Fair Labor Standards Act (FLSA). ESSENTIAL JOB FUNCTIONS: • Minimum of 3 years of experience in the tree care industry., • Strong verbal and written communication skills with excellent customer service capabilities., • Ability to build and maintain solid relationships with clients., • Proven track record of meeting deadlines and ensure the work queue remains up-to-date., • Skilled in multitasking, planning, and organizing workload effectively., • Proficient in managing and organizing an Outlook Calendar., • Ability to establish and maintain effective, cooperative working relationships with others., • Capable of working accurately and independently in a fast-paced environment. KEY RESPONSIBILITIES: • Knowledge of tree species and ability to identify them on-site., • Ability to assess and report on tree species, size, condition, and location., • Identify tree diseases, trimming needs, and develop watering schedules., • Proficient in using GPS inventory and Field Apps for tracking., • Responsible for tagging trees for identification purposes., • Comfortable using an iPad for Field App operations., • Communicate effectively with Area Supervisors, Crew Leaders, Office Staff, and City Officials., • Assist in maintaining relationships with current clients, focusing on customer service excellence., • Assist in tree care estimating, including trimming, removals, technical removals, stump grinding, plant health care, and equipment access., • Provide proposal materials to the sales team for bid/proposal submissions., • Assist with pre-bid walks, monthly landscape walks, and Board meetings to gather project information before bid submission., • Schedule and manage appointments, events, and job site visits via Outlook Calendar., • Foster and maintain good relationships with partners in related businesses. SALARY: $74,880.00 -$79,000.00 Benefits: • Competitive salary, • Company vehicle, laptop, and other required technology, • Insurance, including Medical, Dental, Vision, and life insurance options, • Opportunity for training and certification, • Great team-oriented environment, • Vacation, Holiday, & Sick Pay, • UNUM - offering Accident, Hospital, etc. plans on a voluntary basis, • Flexible Spending Account (FSA), • 401k Retirement Account About Great Scott Tree Service Great Scott Tree Care started in 1976 with a pick-up truck, a chainsaw, and a vision to provide high-quality tree maintenance at a competitive cost. Our commitment to state-of-the-art equipment, certified professionals, and quickly identifying the future needs and potential problems of our customers has led us to be a leader in commercial, municipal, and university tree care. At Great Scott we have five core principles that we adhere to everyday: • Quality, • Integrity, • Safety, • Innovation, • Care With that in mind, we have developed the “Grow It Forward” approach.: before we start any job, we set up both short- and long-term tree care goals with the client. Once we’ve established these goals, a big picture view will guide us, ensuring that the client’s expectations are met. It is more of an investment up front, but we have learned it pays off for our clients down the road – typically saving them time and money. Our vision throughout the years has always been caring for trees that enhance the beautiful landscapes of southern California communities not just for today but for future generations to come.

With a legacy spanning over 35 years, Harris Spice has been a trusted partner and leading supplier of high-quality spices, herbs, and innovative seasoning blends. With international facilities and a global supply chain, we proudly serve multiple channels of trade—including industrial bulk, food service, and retail. Our commitment to excellence, quality and consistency has earned us the trust of some of the nation’s largest and most recognized brands. As Harris Spice continues to grow, we are dedicated to cultivating a dynamic, inclusive workplace where innovation thrives. We're looking for diverse, talented individuals who are ready to grow with us and help strengthen a brand known for trust, quality, and bold flavor solutions. Position Overview/Job Summary: The EHS Manager is responsible for developing, implementing, and maintaining the company’s environmental, health, and safety programs to ensure compliance with regulatory requirements, promote a safe work environment, and support overall employee well-being. This role oversees all aspects of occupational safety and environmental compliance while partnering with other departments to mitigate risk and improve workplace safety culture. Essential Job Functions: • Plan, coordinate, and oversee company-wide EHS programs to ensure a safe work environment consistent with regulatory and company standards as Safety Champion., • Promote the company mission, philosophy, and goals by evaluating and enhancing the effectiveness of EHS programs., • Study, develop, and implement new and revised safety programs, Job Safety Analyses (JSAs), and safety rules; make recommendations and ensure compliance., • Maintain current knowledge of federal, state, and local safety and environmental regulations, manufacturing processes, and best practices., • Ensure effective application of safety and environmental policies and practices throughout the organization., • Plan, coordinate, and deliver safety training for employees, contractors, vendors, and visitors., • Conduct monthly training sessions on regulatory compliance, hazardous condition monitoring, safe work practices, and proper use of safety equipment., • Keep supervisory personnel informed of hazardous conditions and recommend injury prevention measures., • Support employee well-being by addressing ergonomic issues and promoting a safe and healthy work environment., • Conduct regular inspections of facilities, machinery, and equipment to identify potential hazards., • Assess risks associated with machinery, chemicals, environmental conditions, and work practices, and implement mitigation strategies., • Lead investigations of workplace incidents, injuries, and property damage, ensuring corrective actions are implemented., • Identify, assess, and mitigate high-risk exposures through proactive safety initiatives., • Manage permitting, handling, and reporting to ensure compliance with local, state, and federal regulations., • Compile, analyze, and interpret data related to workplace accidents, illnesses, near-misses, and environmental metrics., • Prepare regular safety and environmental reports (monthly, quarterly, and annual) for management review., • Maintain accurate EHS records, logbooks, and documentation., • Maintain communication with OSHA and environmental program inspectors and manage responses to inspections, citations, or regulatory inquiries., • Partner with HR to manage workers’ compensation claims and follow up on cases with the medical department., • Assist line and staff management in understanding OSHA regulations, safety standards, and compliance requirements., • Maintain presence on plant floor and integrate EHS into daily operations, • Collaborate closely with plant manager & leadership team to align safety goals w/ operational goals, • Oversee installation of safety devices on machinery or direct their installation., • Ensure the occupational health and well-being of employees by addressing ergonomic issues, workplace conditions, and overall work environment quality to support safety, health, and productivity., • Conduct regular inspections of facilities, machinery, and work practices to identify potential hazards, assess risks, and implement strategies to mitigate them, ensuring continuous compliance with safety protocols and regulations., • Supports all aspects of EH&S performance, including injury reduction and avoidance, environmental sustainability initiatives, and meeting EH&S regulatory and company requirements, • Maintain safety reports, logs, and documentation for compliance and respond to inquiries from agencies, • Perform other duties as assigned., • This job description outlines key duties and responsibilities, which may change at any time with or without prior notice. Skills/Qualifications: • Bachelor's degree from a four-year college or university in a safety, occupational health field preferred., • 7+Years: experience in the Safety and Occupational Health field, • Demonstrated experience overseeing EHS programs and systems at the site level, • Comprehensive knowledge of OSHA regulations and other relevant safety, health, and environmental standards, • Proven ability to identify and mitigate safety hazards, • Experience in preparing and submitting regulatory and compliance reports, • Experience in conducting on-site audits and training staff in EHS procedures, • Proven ability to foster a safety culture and promote a zero-incident environment, • High proficiency utilizing Microsoft Programs, Word, Teams, Excel, Power Point and others., • Good communication and interpersonal skills., • Self-motivated with a results-driven approach., • Bi-lingual in Spanish is preferred. Physical Requirements: • Ability to work in both seated and standing positions for extended periods within an office, • Ability to lift up to 50 lbs., stand, bend, and move for extended periods., • Frequent standing, walking, bending, twisting, stooping, grasping, reaching, climbing, and general movement throughout the facility, • Ability to sit, use hands and fingers, reach with arms, bend, kneel, climb, push, and pull as required, • Must be able to work in a warehouse environment that may vary in temperature (hot or cool) and can be noisy at times, • Must be able to communicate effectively orally and in writing., • Visual acuity to read documents, computer screens, files, etc., • Ability to hear in person and via phone. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Harris Spice reserves the right to revise or change job duties and responsibilities as the need arises. Equal Employment Opportunity Statement Harris Spice is a certified Minority-owned business. Our business is an equal opportunity employer committed to a diverse and inclusive workforce. Applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), age, sexual orientation, national origin, marital status, parental status, ancestry, disability, gender identity, veteran status, genetic information, other distinguishing characteristics of diversity and inclusion, or any other protected status.

American Woodmark is one of the nation's largest cabinet manufacturers. By partnering with major home centers, builders, and dealers, we spark the imagination of homeowners and designers and bring their vision to life. Across our service and distribution centers, our corporate office and manufacturing facilities, you'll always find the same commitment to customer satisfaction, integrity, teamwork, and excellence. We are on a journey to encourage an inclusive Woodmark and are taking meaningful actions to promote diverse representation across every part of the business. Together, every team member contributes to making American Woodmark a place where people can express who they are through what they do. POSITION PURPOSE: Lead the Plant Level Team (PLT) in the overall coordination and optimization of the human resources and the training/development functions in meeting or exceeding established plant goals. In addition to the traditional HR generalist responsibilities, this role must be an active leader in the development of the PLT, the salaried workforce and the hourly workforce. IDEAL CANDIDATE PROFILE: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and ability required. Experience • 8-10 years human resource management experience; manufacturing preferred., • Minimum of 6 years of supervision experience; multiple departments., • Must have experience in developing individuals and teams in a high-performance environment., • Bi-lingual in Spanish is required., • Excellent personal computer skills in a network environment; Microsoft Office products experience preferred - Outlook-Word-Excel-Access-PowerPoint., • Management style must be consistent with CITE principles., • Strong planning/organization & time management skills., • Undergraduate degree in human resources or related discipline; PHR/SPHR certification or advanced degree is a plus. ESSENTIAL FUNCTIONS: • Ensure that the AWC culture exists and flourishes in assigned location. Should there be issues regarding the cultural imperatives, the HR Manager must be willing and able to intercede and correct the issue., • Assist the plant manager in developing the PLT. This includes: teambuilding activities, organizational development, succession planning, development of individual development and performance improvement plans., • Maintain a strong HR presence on the plant floor., • Proactive coordination of all recruiting activities; salary and hourly., • Provide counseling and resource assistance in the areas of policy, benefits, salary administration, training/development, performance issues., • Assist the plant manager and the PLT with leadership skills development for both PLT and floor level team., • Monitor and coordinate all local/state governmental and regulatory compliance activities., • Through active participation in all employment actions at location works to ensure that all employment laws are followed and minimize the risk of litigation. Should litigation issues arise, represents the company in all employment related claims including EEOC, DOL, NLRB, OSHA, and WC., • Maintain a high degree of transactional quality with accurate and complete employee files and other HR related information for salary and hourly employees. This includes the timely, accurate and complete submission of personnel action forms (PAF), personnel requisitions and any required reports., • Plan and coordinate department's activities to support SQDC targets in order to meet or exceed client or customers’ expectations., • Actively participate on assigned teams and/or projects. Proactively seek to implement improvement ideas and best practices., • Champion training efforts and works with training coordinator to ensure that training is up to date and conducted in prescribed methods., • Responsible for the coordination and completion of the goal setting and performance appraisal policy for salaried and hourly personnel., • Participates in local wage and benefits surveys to ensure competitiveness and notifies corporate HR of any deficiencies., • Provides communication on departmental expectations, motivates team members, and identifies opportunities for improvement. In plants where an HR supervisor position is staffed, the HR manager is responsible for developing the HR supervisor in preparation for promotion to an HR manager position., • Provide team leadership consistent with company vision, mission, and CITE principles., • Ensures company and location policies are followed and provides guidance and counseling, as necessary., • Establish individual goals for team members in alignment with overall organization goals and perform periodic performance reviews to determine progress., • Support and represent company as a union-free environment., • Provide a safe and productive work environment, including housekeeping., • Participate in the identification and implementation of continuous improvement initiatives., • Represent the company in community relations activities., • Will supervise hourly and salaried employees in the assigned department and/or departments. Is responsible for the overall direction, coordination, and evaluation of direct reports. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. SCOPE & EXPECTATIONS: Communication Skills: • Ability to read, analyze, and interpret common business and technical journals and financial reports., • Ability to listen and communicate effectively with customers/clients in an effort to respond to common inquiries or complaints from customers/clients, regulatory agencies, or members of the business community and public., • Ability to apply basic mathematical concepts like addition, subtraction, multiplication or division to basic manufacturing performance recording or financial performance recording., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Typical indoor manufacturing environment. The noise level is usually moderate to high and hearing protection may be required on the production floor. Safety glasses are required on the production floor. Some out-of-town travel is required. Occasional weekend work required., • Reports to: Director, Manufacturing Operations, • Recruitment process may consist of any combination of phone, video and in-person interviews., • Offers may be contingent upon successful completion of Background Check, Drug Screen, Physical Examination and/or potential Motor Vehicle Check. BENEFITS PACKAGE INCLUDES: • Competitive Compensation, • Health Care Benefits, • Paid Holidays, • Paid Vacation Days, • Paid Sick Days, • 401(k) Match, • Tuition Assistance, • Relocation Assistance when available AN EQUAL OPPORTUNITY EMPLOYER The American Woodmark Corporation does not discriminate on the basis of race, color, national origin, ancestry, age, religion, military and veteran status, sex, gender, gender identity, gender expression, sexual orientation, genetic information, marital status, medical condition, pregnancy, or any other legally-protected characteristic; and it will comply with all applicable state discrimination laws. No person shall be denied employment solely because of any disability which is unrelated to the ability to engage in the essential functions involved in the position for which application has been made either with or without reasonable accommodations.

American Woodmark is one of the nation's largest cabinet manufacturers. By partnering with major home centers, builders, and dealers, we spark the imagination of homeowners and designer and bring their vision to life. Across our service and distribution centers, our corporate office and manufacturing facilities, you'll always find the same commitment to customer satisfaction, integrity, teamwork, and excellence. We are on a journey to encourage an inclusive Woodmark, and are taking meaningful actions to promote diverse representation across every part of the business. Together, every team member contributes to making American Woodmark a place where people can express who they are through what they do. POSITION PURPOSE: Work with the Plant Manager to direct and lead American Woodmark's production initiatives with the goal of establishing a world class manufacturing operation. Overall development and coordination of plant operations and production processes to optimize the use of all resources and equipment in meeting and/or exceeding established plant goals. IDEAL CANDIDATE PROFILE: To perform this job successfully, an individual must be able to excel at the essential functions assigned. The requirements listed below are representative of the knowledge, skill and ability required. Experience • Must have a proven track record of cultivating and developing talent in an organizational setting., • Minimum of 8 years of manufacturing experience; wood working related preferred., • Minimum of 8 years of supervision experience; multiple departments, • Must have experience in wood drying, machining, cabinet component manufacturing, material flows and inventory management; continuous improvement practices; and process analysis., • Must have Lean manufacturing experience., • Excellent personal computer skills in a network environment; Microsoft products experience preferred - Outlook-Word-Excel., • Track record of successful project management., • Experience in working in a team environment., • Management style must be consistent with CITE Principles., • Strong planning/Organization - Time Management skills., • Undergraduate degree in Engineering, Business Management/Operations, or related discipline MBA a plus; extensive work experience may be considered in lieu of education. ESSENTIAL FUNCTIONS: • Actively lead the organizational development efforts for the production area and support OD throughout the location/organization., • Coordinate communication between assigned departments and shifts and foster healthy Client/Provider relationships., • Improve equipment uptime, capability and reliability through the passionate facilitation of TPM initiatives and the AWC SEE (Strategic Equipment Excellence) program as well as all five phases of Six-Sigma improvement or the Defining, Measuring, Analyzing, Improving, and Controlling of equipment related problems., • Continuously evaluates plant processes, being the driving force behind continuous improvement and cost reduction., • Plan and coordinate department's activities to support SQDC targets, and meet and/or exceed client and/or customer's expectations., • Lead and/or facilitate Kaizen events and actively participate on assigned teams and/or projects., • Develop documented standard operating procedures related to material, equipment and processes throughout the plant finishing operations., • Participate in identifying hiring needs; employee selection and training processes., • Provide communication on departmental expectations, motivates team members, and identifies opportunity for improvements., • Provide team leadership consistent with company vision, mission, CITE principles., • Ensures Policies are followed and provides guidance and discipline., • Effectively utilize all resources to maximum potential performance to achieve SQDC goals., • Establishes individual goals for team members in alignment with overall organization goals and performs periodic performance reviews to determine progress., • Provide a safe and productive work environment, including housekeeping., • Role model CITE and Working in Teams principles, • Perform other tasks as directed by direct supervisor, • Supervisory Responsibilities:, • Will supervise hourly and salaried employees in the assigned department and/or departments. Is responsible for the overall direction, coordination, and evaluation of direct reports. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employee; addressing complaints and resolving problems. SCOPE - EXPECTATIONS: • Communications Skills:, • Ability to read, analyze, and interpret common business and technical journals and financial reports., • Ability to listen and communicate effectively with customers/clients in an effort to respond to common inquires or complaints from customers/clients, regulatory agencies, or members of the business community and public., • Ability to develop presentations to be delivered to production team, plant level team, or public groups., • Mathematical Skills:, • Ability to apply basic mathematical concepts like addition, subtraction, multiplication or division to basic manufacturing performance recording or financial performance recording., • Ability to read and use a tape measure., • Reasoning Ability:, • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Physical Demands:, • While performing the duties of this job, the employee is regularly required to stand and walk and talk or hear. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to lift up to 20 pounds., • Working Environment:, • Typical indoor/outdoor manufacturing environment. The noise level is usually moderate to high and hearing protection may be required on the production floor. Safety glasses are required on the production floor. Some out-of-town travel is required. Occasional weekend work required., • Reports to: Director, Manufacturing, • Recruitment process may consist of any combination of phone, video and in person interviews., • Offers may be contingent upon successful completion of Background Check, Drug Screen, Physical Examination and/or potential Motor Vehicle Check. Annual Salary: $130,000 - $145,000 per BENEFITS PACKAGE INCLUDES: • Competitive Compensation, • Health Care Benefits, • Paid Holidays, • Paid Vacation Days, • Paid Sick Days, • 401(k) Match, • Tuition Assistance, • Relocation Assistance when available American Woodmark Corporation is unable to assist with sponsorship for work authorization or take over support of an employment visa for this role. Applicants for this position must be able to demonstrate U.S. work authorization. AN EQUAL OPPORTUNITY EMPLOYER The American Woodmark Corporation does not discriminate on the basis of race, color, national origin, ancestry, age, religion, military and veteran status, sex, gender, gender identity, gender expression, sexual orientation, genetic information, marital status, medical condition, pregnancy, or any other legally-protected characteristic; and it will comply with all applicable state discrimination laws. No person will be denied employment solely because of a disability, provided that the person can perform the essential functions of the position for which the person has applied, either with or without reasonable accommodations.

• Job Identification 116957, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Position Overview: As a Manufacturing Operations Supervisor, 1st shift, you'll be part of our Industrial team working as an on-site employee at our Fullerton, CA location. Key Responsibilities: ' Run a safe, injury/accident-free workplace. ' Responsible for daily management and leadership of all resources assigned.' Typical responsibilities include but are not limited to: Schedule adherence, productivity, personnel development, time and attendance, training and establishing/monitoring departmental goals. ' Enhance the operational procedures, processes and systems to improve operational efficiencies. ' Work independently and within a team while coordinating with other Departmental Leaders and/or Managers to achieve Daily/Weekly/Monthly goals and objectives. ' Interprets company policies to workers, leads by example and enforces all Federal, State and local regulations. ' Deploys team members to both strategically and tactically engage in cross functional problem solving to improve production efficiencies and product quality. ' Conducts performance appraisals and manages work performance of all subordinates. ' Exercises final department recommendations regarding retention, separation, or changes in wages. ' Keeps accurate records pertaining to all facets of operation. ' Escalates irreconcilable problems to the attention of the appropriate plant management/HR. ' Formulates and maintains highest standards of housekeeping (5S) in all areas assigned. Reports and rectifies any actual or perceived EH&S problems within scope of responsibility. Benefits/Salary: The position includes competitive wages, with a targeted range of $125,000 - $135,000, and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. , Basic Qualifications: ' Bachelor's degree in Manufacturing Engineering, Operations Management, or a combination of appropriate related work experience and education/training. ' Extensive experience with CNC equipment, programming, tooling and fixturing. ' 6+ years of progressive manufacturing leadership experience and responsibility. Aerospace and/or Automotive experience preferred. ' Expert ability to read and interpret blueprints, methods of manufacturing, machine code, tabular data and other related technical documentation. ' Ability to read and interpret technical drawings and blueprints. ' Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Preferred Qualifications: Certifications from recognized institutions like the National Institute for Metalworking Skills (NIMS) can be advantageous. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

This internship offers handson experience supporting materials management and continuous improvement through participation in Lean Kaizen activities and followup initiatives. Interns will analyze inventory, MRP parameters, lead times, and planning data to help improve raw, semifinished, and finished goods performance across manufacturing and distribution operations. The role focuses on reducing excess and obsolete materials, improving inventory health, addressing product expiry and scrap, and supporting solution implementation, performance tracking, and final presentations of results. How You'll Make An Impact: • Supporting 1-2 Irvine operations in each of their improvements to inventory $, inbound freight cost, and 'net scrap' (i.e. expiry), • Kaizen preparation: Baseline Data collection and analysis, understanding MRP (impact of planning/buying, impact of key master data (safety stock, lead time, lot size, etc), and how these factors impact inventory dollars, inventory turns and product expiry., • Post kaizen sustainment (of improvements) daily management, process indicators, standard work, and plant MORs., • Participation in a minimum of 1 Global Lean Kaizen., • Implementation of local KPIs (Plant inventory dashboard) for each work area., • Education: Major in Operations Management, Material management, Manufacturing Engineering, Mechanical Engineering or equivalent., • Work Experience: Previous summer internships or work experience in laboratories, manufacturing environments working with electromechanical, chemical and/or mechanical devices., • Laboratory experience working with electrical/electro mechanical devices and equipment is a plus., • Strong interpersonal skills: Must work well/interact well with people of all levels of education, work experience and different functions/departments., • Problem solver: natural curiosity, inquisitiveness and a seek-to-understand mentality., • 3.0 Minimum GPA., • Rising Juniors, Seniors, and Masters Students. Total Rewards Package: At Bio-Rad, we're empowered by our purpose and recognize that our employees are as well. That's why we offer a competitive and comprehensive Total Rewards Program that provides value, quality, and inclusivity while satisfying the diverse needs of our evolving workforce. Bio-Rad's robust offerings serve to enrich the overall health, wealth, and wellbeing of our employees and their families through the various stages of an employee's work and life cycle. Benefits: We're proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG's), and more! Compensation: The hourly range for this position is $25 at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation:Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. ___ for more information on this scam and how to avoid it. Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.

In this role as a Facilities Maintenance Technician IV, your primary responsibility will be maintaining, repairing, operating facilities infrastructure including HVC, Boilers, Compressors and Deionized water systems and electrical generators in support of manufacturing operations. You will need to troubleshoot, repair, replace defective parts and restore operations with minimum downtime. You will also support and maintain manufacturing, production and utility equipment in order to meet product quality and production schedule requirements. This position is key to ongoing preventive maintenance and management of all infrastructure systems and building equipment including steam boilers, mechanical, electrical and plumbing systems. Position participates in rotating "On Call" duties for after-hours facilities emergencies and refrigeration operating temperature alarms to ensure product quality. Maintenance Mechanic IV is also a position with leadership responsibilities. Their judgment helps maintain the daily activities and guides others in the department. They assist management with specific tasks including plant security and key control. Their experience allows them to handle assignments with little supervision and assist others to perform their assignments as well. How You'll Make An Impact: • Performs scheduled building equipment preventive maintenance (PM) tasks, fills out PM check sheets, signs and dates equipment tags and logs tasks into computer maintenance management software., • Responsible for maintaining chart recorders and log books in a GMP environment., • Assists in Captial Improvement Projects with coordinating contractors prepping areas, and supporting normal business activities., • Lead other Maintenance Associates and foster knowledge share to help develop the skill set of the department., • High School diploma or equivalent., • 6+ years working in facilities maintance or Associate degree with 5+ years experience preferred., • 4+ years working in a GMP environment with experience working in facilities/plant maintenance organization preferred., • Understandng of Pnuematics, Boilers and stand by electrical generations system. Knowledge of three phase electrical wiring. Knowledge of plumbing. Knowledge of DI water generation systems. Total Rewards Package: At Bio-Rad, we're empowered by our purpose and recognize that our employees are as well. That's why we offer a competitive and comprehensive Total Rewards Program that provides value, quality, and inclusivity while satisfying the diverse needs of our evolving workforce. Bio-Rad's robust offerings serve to enrich the overall health, wealth, and wellbeing of our employees and their families through the various stages of an employee's work and life cycle. Benefits: We're proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG's), and more! Compensation: The estimated base salary range for this position is $38.75 to $53.27 per hour, at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. This position is eligible for a variable annual bonus, which is dependent upon achievement of your individual objectives and Company performance. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation: Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. ___ for more information on this scam and how to avoid it. #LI-JS1 Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.

Now hiring Blending Associate Stanton, CA Pay Rate: $20.00 per hour Shift: 9:30 a.m.-6 p.m. | Monday- Saturday Built to Last. Just Like You. If you take pride in showing up, working hard, and keeping things running, this Blending Associate job in Stanton is for you. You'll help build, pack, or move products that matter. It's steady work with good pay, benefits, and a team that respects your effort. Production Line Ready • Diploma or GED - show you've done the work, • 1+ years of Blending/Mixing, Production, and Manufacturing experience, • Lift (up to) 50 lbs and stack product safely, • You're good with your hands and can be "on-the-go" the full shift, • Good weekly pay for the work you put in, • Strong benefits package - Medical, dental, vision, life, and disability, • Safety-first floor where you can focus and get it done, • Employee Discounts that help your dollars go farther 4.9 Stars from the Production Crew 98% say we make it easy to find good work. Join a Team That Works for You At Staffmark, we're more than just a staffing company-we're your career partner. As part of RGF Staffing and Recruit Group, anHR powerhouse behind big names like Indeed and Glassdoor, we've got the muscle and the know-how to get you where you want to go. With more than half a century of experience and a track record of putting hundreds of thousands of people to work every year, we've got your back. Whether you're looking to level up, switch gears, or just get to work fast, we make it happen. Join us and experience the advantage of working with a trusted name in recruiting-because your success is our success. The base pay range listed reflects what we reasonably expect to offer for this role. Actual pay may vary based on location, experience, and performance. Depending on the position, benefits may include medical, dental, and vision coverage; retirement and savings plans; paid holidays and time off; supplemental insurance; and additional wellness or incentive programs. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact. Staffmark is an equal opportunity employer. Allapplicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other legally protected status. Staffmark offers reasonable accommodations for qualified individuals with disabilities; contact your local branch for inquiries. Staffmark is an E-Verify employer. See our Privacy Notice for Candidates and Employees/Contractors at . By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. Frequency varies and message/data rates may apply. Reply STOP to cancel or HELP for help.

Production Supervisor – On‑Site (Fullerton, CA) 1st Shift | 5:30 AM Start | Typically 10‑Hour Shifts We are seeking an experienced Production Supervisor to oversee day‑to‑day manufacturing operations at our Fullerton facility. This role is responsible for directly supervising production and operating employees while ensuring safety, quality, and productivity goals are met. Key Responsibilities • Directly supervise and coordinate the activities of production and operating workers, including inspectors, machine setters and operators, assemblers, fabricators, precision workers, and plant/system operators, • Enforce all safety, sanitation, and regulatory requirements, • Plan, organize, and establish work schedules, assignments, and production sequences to meet daily and long‑term production goals, • Coordinate operations and workflow with other supervisors and departments, • Monitor production processes, materials, equipment, and work environments to ensure efficiency and compliance, • Inspect production equipment and monitor equipment operation to ensure proper functionality, • Calculate material, equipment, and labor requirements to support production plans, • Instruct and train employees on equipment usage, technical procedures, and best practices, • Coach, develop, and provide ongoing feedback to team members, • Identify issues, make sound decisions, and implement solutions to improve processes, productivity, and product quality, • Gather and analyze information to support operational decisions and continuous improvement initiatives, • Coordinating the work and activities of others, • Organizing, planning, and prioritizing work, • Scheduling work and production activities, • Coaching and developing team members, • Decision‑making and problem solving, • Clear communication with supervisors, peers, and direct reports, • Previous supervisory experience in a manufacturing or production environment, • Strong knowledge of production operations, safety standards, and equipment oversight, • Ability to lead teams in a fast‑paced, hands‑on environment, • Strong organizational, communication, and leadership skills, • On‑site role in Fullerton, CA, • 1st shift, typically 10‑hour shifts starting at 5:30 AM Compensation: $75,000 to $85,000 Benefit offerings: include medical, dental, vision, additional voluntary benefits, 401K plan. Our program provides employees the flexibility to choose the type of coverage that meets their individual needs. Available paid leave may include Paid Sick Leave, where required by law; any other paid leave required by Federal, State, or local law; and Holiday pay upon meeting eligibility criteria. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ___ The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance

Job Description The Electrical Design Engineer plays a crucial role within the engineering team, contributing expertise to support sales and operations. This position is instrumental in the design and development of equipment, involving the preparation of comprehensive technical documentation aligned with sales proposals, performance requirements, and specifications. Essential Duties & Responsibilities: • Research and Review: Investigate project requirements and design information to ensure adequacy for completing the design while confirming alignment with the design concept., • Control System Design: Develop control systems based on customer specifications, employing a deep understanding of relay or PLC control and writing PLC control logic., • Engineering Documentation: Collaborate in the preparation of engineering documents, ensuring accuracy and adherence to corporate standards., • Project Collaboration: Communicate effectively with the project team to establish essential functions and deadlines for specific projects., • CAD Design: Utilize CAD templates or create designs and drawings by updating existing CAD files, ensuring alignment with client requirements and corporate standards., • Quality Assurance: Analyze reports, drawings, and tests to plan and design projects, completing the design process with necessary corrections following a quality review., • Proposal Support: Assist the sales team in preparing scope and estimates for proposals, leveraging technical expertise., • Procurement Oversight: Perform inspection and surveillance duties associated with outsourced electrical procurement., • Startup Assistance: Support equipment startup at customer sites as required., • Education: BS degree in Electrical Engineering from an accredited program., • Experience: 3+ years of experience in designing control systems., • AutoCAD Proficiency: Possess experience with AutoCAD for effective design implementation., • Control Panel Design: Demonstrate expertise in designing control panels based on relay or PLC control., • PLC Logic: Exhibit proficiency in writing PLC control logic., • Regulatory Knowledge: Be familiar with related codes and standards, including IEC, NEC, and NFPA., • Technical Writing: Demonstrate proficiency in technical writing to convey complex information effectively., • Team Collaboration: Ability to work collaboratively within a creative, professional team environment. To comply with some state laws, the annual base salary range for this position has been provided. The range given is broad and should be considered as a guideline only. Our client will consider a candidate's work experience, education/training, key skills, the salaries of current employees in similar roles, and other factors when extending an offer.

Job Description SUMMARY: The Maintenance Mechanic is responsible for making daily rounds of all boilers, chillers, pumps, air compressors, vacuum pumps, hallway lighting and exit lights. They perform a daily medical gas inventory, must handle all work orders and Preventative Maintenance that are assigned to him/her, and assists in the security program. This position is under the supervision of the Engineering Supervisor and reports to the Director of Plant Operations. REQUIREMENTS: • Minimum Experience: 6 (six) months experience preferred, • Required Licensure/ Certifications: MAB (90 days upon hire), • Must be knowledgeable of medical equipment and know how to operate and maintain facility boiler equipment, • Must have knowledge of the following: electrical systems, plumbing systems, air conditioning systems and repair of minor building materials to the facility. They must be able to handle circumstances and take immediate action, • Full command (verbal and written) of the English language, • Medical, dental and vision coverage is provided for all full time and part time employees*, • Medical is 100% employer paid including dependents*, • Employee Assistance Program, • Basic Life and AD&D, • 401k plan with company match, • Generous PTO plan*, • Pet Insurance Discount Program*

Job Description The maintenance staff ensures that the yard is kept in order and safe as well as ensure plant conditions are maintained throughout the various seasons. Essential Functions: • Monitors plant condition and takes care of pruning and fertilizing needs., • Determines if a plant can be nursed back to health or if they need to be classified as spoilage in inventory. Takes action to get the plant healthy or alerts Inventory Clerk of spoiled plant material., • Ties trees to head level wire in nursery beds/bins and replace broken stakes on plants., • Alerts buyers of overstocked quantities of the same plant/variety., • Keep nursery looking clean and organized. Use of leaf blowers, taking trash bags to dumpsters, organizing sheds, moving pallets to the correct areas after use, etc., • Various tasks as directed by Yard Management., • Maintain company issued PPE and tools (Gloves, safety glasses, pruners, etc.), • Alerts management, sectional care or irrigators if irrigation needs are not being met., • General care for the nursery grounds, keeping the nursery clean, organized, and safe for employees, customers and vendors., • General care for nursery stock (plants), ensures plants are watered, handled with care, and are placed in the appropriate location., • Good knowledge of plant identification, quality, and health. Ability to identify pest and disease. Additional Tasks: • May assist in other nursery departments as needed., • Duties are subject to change at any time per management’s discretion. Job Specifications: Constantly works in outdoor weather conditions on uneven ground surfaces and rainy weather. Must be able to remain in a stationary position (standing/sitting). Extensive walking. Stooping, kneeling, and crouching required. Bending at the waist, twisting, turning, and squatting is required. Lifting requirements: Up to 50 lbs. 75% of the time. Up to 100 lbs. 25% of the time (team lift techniques when required). Hand movement: Gross grasping for moving plant material. Use of hands/fingers. E-Verify Participation: Devil Mountain Wholesale Nursery participates in E-Verify. All newly hired employees will be required to complete the Form I-9 and participate in the E-Verify employment eligibility verification process. M-F 7:00am-3:30pm Occasional Saturday's Feb.-Nov.

Job Description Sunny Sky Products prides itself on our commitment and dedication to creating, manufacturing and delivering top quality products in the beverage industry. We have generated an extensive product portfolio that includes frozen dispensed beverages, cold dispensed, hot dispensed and beverage enhancers. We are seeking a skilled and reliable Maintenance Technician to support our food and beverage manufacturing operations. This role is responsible for performing preventive, corrective, and emergency maintenance on production, packaging, and facility equipment to ensure safe, efficient, and continuous operations. The Maintenance Technician works closely with production, quality, and sanitation teams to minimize downtime and maintain compliance with food safety and regulatory standards. Key Responsibilities Equipment & Facility Maintenance • Perform preventive and predictive maintenance on processing, packaging, and material handling equipment., • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic systems., • Troubleshoot PLC-controlled machinery and automated systems (where applicable)., • Maintain plant utilities including boilers, compressors, refrigeration systems, and HVAC (as applicable)., • Respond promptly to equipment breakdowns and production interruptions., • Partner with production supervisors and operators to resolve mechanical issues., • Perform equipment changeovers and adjustments to support production schedules., • Ensure all maintenance activities comply with GMP, HACCP, and food safety standards., • Follow proper lockout/tagout, confined space, and safety procedures., • Maintain clean and organized work areas in accordance with sanitation requirements., • Execute scheduled preventive maintenance programs., • Document work orders, repairs, and parts usage in the maintenance management system (CMMS)., • Identify recurring equipment issues and recommend permanent solutions., • Maintain inventory of critical spare parts and tools., • Recommend parts and materials for equipment repairs and upgrades., • High school diploma or GED required; technical certification or trade school preferred., • 3+ years of industrial maintenance experience in a manufacturing environment (food or beverage preferred)., • Strong mechanical and electrical troubleshooting skills., • Experience with conveyors, fillers, mixers, packaging lines, pumps, and motors., • Basic PLC and automation knowledge preferred., • Ability to read blueprints, schematics, and technical manuals., • Familiarity with CMMS systems., • Strong problem-solving and diagnostic skills, • Ability to work independently and as part of a team, • Excellent time management and organizational skills, • Commitment to safety, quality, and continuous improvement, • Ability to stand, walk, bend, climb, and lift up to 50 lbs., • Comfortable working around machinery, noise, temperature variations, and food-grade environments., • Full time job, • Monday through Friday from 6AM to 2:30PM $32.00 - 36.00 per hour based on experience New hire Bonus $500.00 Benefits • Medical, Dental & Vision Coverage, • Life Insurance, • 10 Paid Holidays, • PTO - Vacation Time, • Sick Pay, • 401K Program, • Company STD & LTD (Short term & Long-term disability), • Basic Life Insurance & AD&D Insurance, • Perfect Attendance Monthly Bonus Program up to $100.00, • Employee Referral Bonus Program up to $500.00 For more information about our company please visit our website at Sunny Sky Products is an equal-opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship.

Title: Building Engineer Location: Fountain Valley Department: Plant Operations Status: Full-Time Shift: Variable Pay Range*: $32.19/hr - $46.68/hr MemorialCare is a nonprofit integrated health system that includes four leading hospitals, award-winning medical groups - consisting of over 200 sites of care, and more than 2,000 physicians throughout Orange and Los Angeles Counties. We are committed to increasing access to patient-centric, affordable, and high-quality healthcare; your personal contributions are integral to MemorialCare's recognition as a market leader and innovator in value-based and other care models. Across our family of medical centers, we support each one of our bright, talented employees in reaching the highest levels of professional development, contribution, collaboration, and accountability.Whatever your role and whatever expertise you bring, we are dedicated to helping you achieve your full potential in an environment of respect, innovation, and teamwork. Position Summary This position is responsible for the maintenance of the Hospital buildings, equipment grounds and the plant facilities. The incumbent must be highly skilled in all aspects of the building trades including but not limited to; carpentry, plumbing, electrical, utility management, welding, masonry, sheet metal fabrication, construction, mechanics, etc. Furthermore, this position is held accountable to working in a lead capacity through the direction of the Manager of Plant Operations. This position is often called upon to plan, organize, train staff in the functions of the building trades, and to direct and supervise assigned activities of the Plant Operations functions which are necessary in maintaining the hospital plant in working conditions. Essential Functions and Responsibilities of the Job 1.Ability to safely and competently perform assigned duties. 2.Models outstanding customer service skills using "Simply Better" and AIDET principles. 3.Communicates effectively in written and verbal form. 4.Demonstrates composure and appropriateness in performance of duties under duress. 5.Performs advanced maintenance within the building trades. 6.Responds to emergency situations involving either patient safety or building safety according to hospital policies and procedures and/or regulatory requirements. (In emergency response situations, may be assigned a lead role in response and recovery e.g. HICS) 7.Ability to be at work and be on time. 8.Ability to follow company policies, procedures and directives. 9.Ability to interact in a positive and constructive manner. 10.Ability to prioritize and multitask. *Placement in the pay range is based on multiple factors including, but not limited to, relevant years of experience and qualifications. In addition to base pay, there may be additional compensation available for this role, including but not limited to, shift differentials, extra shift incentives, and bonus opportunities. Health and wellness is our passion at MemorialCare-that includes taking good care of employees and their dependents. We offer high quality health insurance plan options, so you can select the best choice for your family. And there's more...Check out our___for more information about our Benefits and Rewards.

In this role, you will report to the manager of site services and will work closely with the Avantor's Lab and Production Services professionals to serve our customers by performing customized, mission-based lab work and research protocols that help return time back to science. Hourly Range: $24 - $27 Shift: Monday - Friday, 7 am - 3:30 pm Location: Irvine, CA Benefits: * Health and Wellness: Medical, Dental, Vision and Wellness programs (eligible for medical coverage on day 1) * Time Off: Paid Time Off (PTO), and Company paid holidays, * Financial Well Being: Spending Accounts: Flexible Spending Account (FSA), Health Savings Accounts (HSA), commuter benefits, 401(k), tuition assistance, employee stock purchase plan discount, * Added Protection Coverage: To include critical illness, hospital indemnity, accident, legal, identity theft protection, pet, auto and home insurance, * Recognition: Celebrate your peers and earn points to redeem on gifts and products. What we're looking for * Education: High school diploma or GED is required. * Experience: 2+ years of experience in material handling, inventory replenishment, warehouse operations, laboratory support, or customer service. * Collaboration Tool: Microsoft Office experience, with proficiency in Word and Excel. * Ability to conform to all customer requirements for background checks, health and safety policies, and security clearances. * Solid understanding and experience in shipping, inventory management, purchasing, warehouse operations, or laboratory support. * Excellent customer service skills with a professional, can-do attitude. * High regard for safety, quality, and strict adherence to protocols, policies, and procedures. * Self-manage, self-motivate, and demonstrate forward-thinking problem-solving skills. * Prioritize tasks and meet deadlines in a fast-paced environment. * Knowledge of scientific products, laboratory operations, and services is a plus. * Communicate effectively with customers, laboratory personnel, and internal contacts. * Must be able to lift up to 50 pounds and perform routine material handling tasks. * Spill containment training, IATA, DOT, IMDG, and OSHA Right to Know certifications are a plus. * Cross-referencing and inside sales experience is a plus. * Knowledge of scientific products and laboratory services is a plus. How you will thrive and create an impact Avantor's Lab and Production Services team is a crucial part of the Avantor Services group serving over 500 customers in biopharma, pharmaceutical, educational, industrial, and high-tech industries with customizable, flexible solutions and end-to-end laboratory operations support. In this role you will: * Execute inventory management-related functions such as monitoring slow-moving and dead inventory, conducting cycle counts, yearly physical inventories, and reporting. * Provides daily customer service functions and communicates with the customer relative to inventory management and laboratory support needs. * Complete purchasing functions, including but not limited to backorder reporting and expediting, direct factory shipments, third-party support, managing quotes, document control, records maintenance, and resolving open invoices or pricing issues. * Responsible for all customer service-related functions, including but not limited to order entry, reporting, maintaining metrics, and cost savings tracking. * Execute shipping coordination activities such as shipping customer material, handling routine issues, operating basic warehouse equipment, entering shipping information into the customer computer system, and completing equipment inspections. * Responsible for handling hazardous materials and preparing shipping documentation and packaging in accordance with regulatory requirements. * Provides laboratory support services, which may include: Glassware washing and drying (glasswash) Stocking laboratory consumables and supplies Maintaining organization and cleanliness of designated laboratory support areas Supporting routine laboratory setup and teardown as directed * Interfaces directly with customer points of contact, purchasing directors, facility directors, laboratory personnel, and plant managers. * Responsible for managing consigned, non-consigned, customer-owned, or third-party inventory. * Utilizes VWR and customer computer systems (SAP, Citrix, Intranet, VWR+, ChemSW, and other customer-specific systems) to fulfill job duties. * Meets established goals and objectives related to safety, performance, and quality. * Creates programs and process improvements to enhance service efficiencies. * Interfaces with VWR sales force and manufacturer representatives. * Documents change management activities. * Updates and maintains Standard Operating Procedures (SOPs). The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of employees assigned to this position. Avantor is proud to be an equal opportunity employer. Why Avantor? Dare to go further in your career. Join our global team of 14,000+ associates whose passion for discovery and determination to overcome challenges relentlessly advances life-changing science. The work we do changes people's lives for the better. It brings new patient treatments and therapies to market, giving a cancer survivor the chance to walk his daughter down the aisle. It enables medical devices that help a little boy hear his mom's voice for the first time. Outcomes such as these create unlimited opportunities for you to contribute your talents, learn new skills and grow your career at Avantor. We are committed to helping you on this journey through our diverse, equitable and inclusive culture which includes learning experiences to support your career growth and success. At Avantor, dare to go further and see how the impact of your contributions set science in motion to create a better world. Apply today! Pay Transparency: The expected pre-tax pay for this position is $45,000.00 - $72,450.00 Actual pay may differ depending on relevant factors such as prior experience and geographic location. EEO Statement: We are an Equal Employment/Affirmative Action employer and VEVRAA Federal Contractor. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state/province, or local law. If you need a reasonable accommodation for any part of the employment process, please contact us by email at ___and let us know the nature of your request and your contact information. Requests for accommodation will be considered on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. For more information about equal employment opportunity protections, please view the Know Your Rights ___. Privacy Policy: We will use the personal information that you have submitted to us in order to consider your application for the relevant role. Your privacy is important to us. Please ___ for our Privacy Policy which explains the purposes for which we will use your personal information and the ways in which we will handle and retain your information. It also explains the rights you have in relation to your information, and how to contact us with any queries or requests. 3rd Party Non-Solicitation Policy: By submitting candidates without having been formally assigned on and contracted for a specific job requisition by Avantor, or by failing to comply with the Avantor recruitment process, you forfeit any fee on the submitted candidates, regardless of your usual terms and conditions. Avantor works with a preferred supplier list and will take the initiative to engage with recruitment agencies based on its needs and will not be accepting any form of solicitation.

Job DescriptionMeiji America Inc. / D.F. Stauffer’s Biscuit Co. is currently hiring 1st, 2nd and 3rd shift Bagger Operators for Food Manufacturer Industry. This position is full-time; schedule is 6 days per week; Saturday or Sunday availability required. About Us: The Meiji Group was founded in Japan in 1916. For nearly a century, it has provided a broad range of products built upon the accumulated knowledge and skills of its talented workforce. Its products are extensive and include confectionery, dairy, baby food, infant formula, sports nutritional, health and beauty items, as well as pharmaceuticals. Meiji America Inc., founded in 2011, as the United States division distributes Meiji branded confections as well as Stauffer’s branded cookies and crackers in the US market. Meiji manufactures and distributes a variety of unique confectionery and snack products including HELLO PANDA™, YAN YAN™ and CHOCOROOMS®. ABOUT THE ROLE The primary function of a Bagger Operator is to operate the machine safely and efficiently to ensure that all products specifications are met. RESPONSIBILITIES & DUTIES • Works well with others, fostering a team atmosphere., • Maintains a clean and safe work area at all times., • Meet all GMP requirements., • Make sure all paperwork is completed in a timely manner. Communicate changes to the next shift., • Check product specifications frequently to ensure a good product., • Monitor the equipment for any maintenance related items that may affect the efficient production of quality products and take action to resolve the issue. Report any operational issues to supervision., • Operate the assigned line with constant attention to product quality, waste reduction and minimal downtime., • Disassembly, cleaning, and/or reassembly of equipment is required for changes., • Assist or supervise the training of new employees., • Assist with changeovers, machine set up and cleaning., • Ability to perform simple mathematical calculations., • Ability to read and record written product specifications., • Ability to work independently., • Notify supervision about any problems., • You must adhere to/comply with Company policies, procedures, and practices. EDUCATION High school or equivalent. PHYSICAL DEMANDS AND WORK ENVIRONMENT While performing the essential duties of this job, the employee must be able to stand, stoop, kneel, crouch, climb and lift up to 50lbs and shared weight up to 100lbs. Occasional exposure to airborne dust, high humidity and extremes of hot and cold are possible. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential duties of this job, the employee must be able to stand, stoop, kneel, crouch, climb and lift up to 50lbs and shared weight up to 100lbs. Occasional exposure to airborne dust, high humidity and extremes of hot and cold are possible. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PAY • 1st Shift: $18.40/Hour, • 2nd Shift: $18.90/Hour, • 1st Shift: 7AM - 3:30PM, • 2nd Shift: 3PM - 11:30PM, • 3rd Shift: 11PM - 7:30PMBENEFITS: (Full time employees), • Health, dental and vision insurance, • 401(k) plan - including employer match, • Pay time off, • Life insurance 6K7FnGUC3g

Job DescriptionBakery Laminator Operator 2nd Shift (1PM - 9:30PM) Monday to Friday plus weekends. Schedule is 6 days per week; Saturday or Sunday availability required. Must have Manufacturing Baking Knowledge Experience About Us: The Meiji Group was founded in Japan in 1916. For nearly a century, it has provided a broad range of products built upon the accumulated knowledge and skills of its talented workforce. Its products are extensive and include confectionery, dairy, baby food, infant formula, sports nutritional, health and beauty items, as well as pharmaceuticals. Meiji America Inc., founded in 2011, as the United States division distributes Meiji branded confections as well as Stauffer’s branded cookies and crackers in the US market. Meiji manufactures and distributes a variety of unique confectionery and snack products including HELLO PANDA™, YAN YAN™ and CHOCOROOMS®. SUMMMARY • The primary function of a Laminator Operator is to operate the laminator machine in a safe, efficient manner to ensure all product specifications are met., • The Laminator must have baking knowledge., • The Laminator must have experience with dough and laminator/sheeting machinery., • The Laminator will need to know how dough should feel and perform through a sheeter laminator.FUNCTIONAL RESPONSIBILITIES & DUTIES, • Works well with others, fostering a team atmosphere., • Maintains a clean, safe work area always. Practicing Clean As you go methods., • Comply with all GMP requirements., • Ensure all paperwork is completed on time and information is accurately recorded., • Ensure the weights are accurate before sending product into the ovens., • Interacts with Mixer to check consistency of dough before Mixer brings dough to the line., • Full knowledge of laminator equipment and product specifications to make necessary adjustments to keep line running efficiently., • Monitor dough level using sound judgement by monitor controls to make sure it has the correct amount of always stretch in the dough., • Monitor thickness of dough, using sound judgement before dough enters the dimple roller to ensure proper thickens., • Monitor dough coming out from print screen area to ensure image is clear and correctly positioned. Adjusting print screen ink levels as necessary to keep the proper amounts of ink on the screen., • Frequently checks specifications of product to ensure good product by taking periodic samples to weigh and check for quality, • Ensures only quality product is entering the oven such as raising the cutter and stopping transfer belts until problem is resolved., • Monitors equipment for any maintenance-related item that may affect the efficient production of quality products and takes action to resolve problem. Reports any operational issues to supervision., • Monitors the laminator equipment and the procedure for safety and reports any issues to the supervisor., • Operate assigned line with constant attention to quality of product, scrap reduction and minimal downtime., • Develop ways to eliminate scrap such as dough falling off conveyors and dough peeling around gauge rolls., • Required to take apart and clean and/or reassemble equipment for changeovers., • Able to properly submit work orders as needed., • Assist or oversee the training of new employees when needed., • Assist with changeovers, machine setup and cleaning., • Ability to perform simple mathematical calculations., • Ability to read and record written specifications of product., • Ability to work independently, or on a team of different sections of the laminator., • Notify Supervision of any issues., • Must adhere/comply with all Company policies, procedures, and practices. EXPERIENCE • Some manufacturing experience in a food plant helpful. PHYSICAL DEMANDS AND WORK ENVIRONMENT While performing the essential duties of this job, the employee must be able to stand, stoop, kneel, crouch, climb and lift up to 50 lbs. and shared weight up to 100 lbs. Occasional exposure to airborne dust, high humidity and extremes of hot and cold are possible. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PAY • 2nd Shift: $20.50 per hourSHIFT HOUR:, • 2nd Shift: 1PM - 9:30PMBENEFITS (Full time employees), • Health, dental and vision insurance, • Health, dental and vision insurance, • 401(k) plan - including employer match, • Pay time off, • Life insurance, • Referral programThis position is full-time; schedule is 6 days per week; Saturday or Sunday availability required. Powered by JazzHR 7wbjnYpf9z

Job DescriptionJob Title: General Operator (Weaver)Shift: 2nd or 3rd • 2nd shift - 1:30 pm to 10 pm $20, • Work safely at all times and report unsafe conditions immediately to a Supervisor or Safety Coordinator, • Understand and follow quality policies to ensure production of high-quality products, • Report to assigned work area on time and ready to work, • Meet required production efficiencies for assigned tasks, • Maintain traceability in compliance with AS9100 standards, • Complete and maintain all required documentation and labeling, • Maintain a clean and organized work area, including end-of-shift cleaning, • Support team and production goalsKey Duties & ResponsibilitiesCreeling / Set-Up (Entering), • Clean and prepare creel spindles prior to setup, • Load yarn spools (1–20 lbs.) onto creel spindles, • Feed yarn through harness and reed according to pattern specifications, • Perform bending (approx. 25%), reaching (approx. 15%), and lifting throughout shift, • Attach hand weights and complete visual inspections of setup, • Transfer yarn ends through harness/reed in predetermined patterns, • Perform creel takedown, including pulling remaining yarn (20–30 lbs.) and removing empty spoolsWeaving Operations, • Perform daily loom inspections to ensure proper operation, • Operate and monitor looms throughout the shift, • Identify and address defects such as broken ends or mis-picks, • Change fill yarn packages as needed (requires frequent walking), • Remove completed fabric rolls and restart new rolls, • Perform kneeling tasks to secure fabric to cores, • Move finished rolls using carts (50–200 lbs., with assistance), • Conduct visual inspections of finished products, • Communicate equipment issues and quality concerns to SupervisorsQualifications & Skills, • Previous manufacturing experience preferred, • Basic math skills required, • Strong attention to detail and problem-solving ability, • Ability to communicate effectively (oral and written English), • Ability to work independently and in a team environment, • Reliable, adaptable, and open to change, • Must have reliable transportation, • Must be available for overtime and rotating weekend shifts#AV1

Job Description IDEAL TRIDON The Ideal Tridon Group comprises a family of brands that support, secure, and connect the movement of air, fluid, and electricity in critical applications. With over 100 years of proven quality and a strong culture of service, we are the worldwide leader in clamps, strut, hose supports, conduit, fittings, and coupling solutions. Our products are engineered to meet the highest standards across a range of industries, and our commitment to innovation, reliability, and customer support ensures we’re ready to meet the demands of today and tomorrow. At the Ideal Tridon Group, connections aren’t just what we make—they’re the heart of everything we do. We are seeking Roll Mill Operators on 1st shift for our Garden Grove plant. Position Summary: Work in a non-climate-controlled manufacturing setting that may include dust and debris and can be loud at times. Perform various tasks involved in Roll Mill operation including but not limited to setting up and operating machines, handling parts and materials, packing parts and other related activities using hand tools, various type of packing materials. Must follow all applicable safety procedures to avoid injuries including requests for help from co-workers. Proper handling of finished parts and products to avoid injuries or damage, follow all operational instructions when operating or using tools and equipment. Provide quality checks as determined. Job may require overtime and a flexible schedule, reporting early and working late, including weekends. Shift: 1st 6:00am - 2:30pm Schedule: Monday-Friday Responsibilities: • Sets up and operates a production machine in accordance with established procedures and guidelines., • Uses computer-controlled equipment to select position and secure automatic or semi-automatic machines., • Controls and adjusts machine settings to complete more complex tasks., • May assist with training other machine operators., • May calculate and assist with numeric controlled programming., • Excellent verbal communication skills with strong aptitude for operating machinery., • Ability to follow instructions and learn the production process., • Excellent organizational skills and attention to detail., • Excellent time management skills., • High School Diploma or equivalent is required., • Hi-Lo Certification preferred, will be trained and certified on the hi-lo., • (2) years of solid experience in a manufacturing environment., • Must be able to clear drug screen and background check. The ideal candidate must be able to complete all physical requirements of the job with or without a reasonable accommodation as you will frequently and repetitively be required to bend, twist, kneel, crouch, and reach to perform work, use hands to finger, handle, or feel; and talk and hear. The employee is regularly required to stand, walk and/or sit and reach with hands and arms. May occasionally climb stairs, drive vehicles, and operate equipment. Lift or carry materials weighing up to 50 lbs. Must wear required hearing and/or eye protection. NOTE: All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. An Equal Opportunity Employer We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Job Description IDEAL TRIDON The Ideal Tridon Group comprises a family of brands that support, secure, and connect the movement of air, fluid, and electricity in critical applications. With over 100 years of proven quality and a strong culture of service, we are the worldwide leader in clamps, strut, hose supports, conduit, fittings, and coupling solutions. Our products are engineered to meet the highest standards across a range of industries, and our commitment to innovation, reliability, and customer support ensures we’re ready to meet the demands of today and tomorrow. At the Ideal Tridon Group, connections aren’t just what we make—they’re the heart of everything we do. We are seeking Roll Mill Operators on 3rd shift for our Garden Grove plant. Position Summary: Work in a non-climate-controlled manufacturing setting that may include dust and debris and can be loud at times. Perform various tasks involved in Roll Mill operation including but not limited to setting up and operating machines, handling parts and materials, packing parts and other related activities using hand tools, various type of packing materials. Must follow all applicable safety procedures to avoid injuries including requests for help from co-workers. Proper handling of finished parts and products to avoid injuries or damage, follow all operational instructions when operating or using tools and equipment. Provide quality checks as determined. Job may require overtime and a flexible schedule, reporting early and working late, including weekends. Shift: 3rd 10:00pm - 6:30am Schedule: Sunday - Thursday Responsibilities: • Sets up and operates a production machine in accordance with established procedures and guidelines., • Uses computer-controlled equipment to select position and secure automatic or semi-automatic machines., • Controls and adjusts machine settings to complete more complex tasks., • May assist with training other machine operators., • May calculate and assist with numeric controlled programming., • Excellent verbal communication skills with strong aptitude for operating machinery., • Ability to follow instructions and learn the production process., • Excellent organizational skills and attention to detail., • Excellent time management skills., • High School Diploma or equivalent is required., • Hi-Lo Certification preferred, will be trained and certified on the hi-lo., • (2) years of solid experience in a manufacturing environment., • Must be able to clear drug screen and background check. The ideal candidate must be able to complete all physical requirements of the job with or without a reasonable accommodation as you will frequently and repetitively be required to bend, twist, kneel, crouch, and reach to perform work, use hands to finger, handle, or feel; and talk and hear. The employee is regularly required to stand, walk and/or sit and reach with hands and arms. May occasionally climb stairs, drive vehicles, and operate equipment. Lift or carry materials weighing up to 50 lbs. Must wear required hearing and/or eye protection. NOTE: All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. An Equal Opportunity Employer We do not discriminate based on race, color, religion, national origin, sex, age, disability, genetic information, or any other status protected by law or regulation. It is our intention that all qualified applicants are given equal opportunity and that selection decisions be based on job-related factors.

Job Description Meiji America Inc. / D.F. Stauffer’s Biscuit Co. is currently hiring 1st and 3rd shift Mixers for Food Manufacturer Industry. This position is full-time; schedule is 6 days per week; Saturday or Sunday availability required. About Us: The Meiji Group was founded in Japan in 1916. For nearly a century, it has provided a broad range of products built upon the accumulated knowledge and skills of its talented workforce. Its products are extensive and include confectionery, dairy, baby food, infant formula, sports nutritional, health and beauty items, as well as pharmaceuticals. Meiji America Inc., founded in 2011, as the United States division distributes Meiji branded confections as well as Stauffer’s branded cookies and crackers in the US market. Meiji manufactures and distributes a variety of unique confectionery and snack products including HELLO PANDA™, YAN YAN™ and CHOCOROOMS®. ABOUT THE ROLE The primary function of a Mixer is to combine raw ingredients from silos, bulk bins and scaled ingredients into the mixer following a predetermined formula to produce consistent batches of dough delivered timely to the processing line. RESPONSIBILITIES & DUTIES • Works well with others, fostering a team atmosphere., • Maintains a clean, safe work area at all times., • Comply with all GMP requirements., • Completes assigned jobs with respect to fellow workers and supervisors., • Manages time effectively when changing over to a different product to minimize downtime., • Obtains scaled ingredients from scaling area and stages them for efficient use., • Locates, obtains and weighs other liquids ingredients needed according to the formula., • Following de formula, combines all the ingredients and mixes to the prescribed times., • Ability to mix any dough to proper specification and line speed, to prevent accumulation of dough if the line goes down., • Full knowledge of dough consistency (touch, look, taste) for various products and product lines., • Prior to dumping the dough into the trough, allows the process operator to check the consistency of the dough., • Delivers the trough to the processing line and positions it into the lift for lines using a dough dump system., • Trained to use applicable classes of Powered Industrial Trucks (PIT) and must maintain valid certification., • Full knowledge of proper operation of equipment and systems in mixing department., • Accurately and timely, completes all necessary paperwork and communicates any changes thoroughly to the next shift., • Monitors the equipment for any maintenance related item that may affect the efficient production of quality products and reports any issues to supervision., • Monitors the equipment and mixing procedure for safety and reports any issues to the supervisor., • Assists in cleaning of equipment, utensils, tools, etc. at the end of production runs and during changeovers., • Able to properly submit work orders as needed., • Assists or oversees the training of new employees by applying knowledge of techniques to mix by formulas., • Assist with changeovers, machine set up and cleaning., • Ability to perform simple mathematical calculations., • Ability to read and record written instructions from a formula sheet., • Ability to work independently., • Notify supervision of any issues, • Must adhere/comply with all Company policies, procedures and practices., • Must be trained and demonstrate full understanding and competency in LOTO procedure when assigned to Cream Mixing area. EXPERIENCE Some manufacturing experience in a food plant helpful. EDUCATION High school or equivalent. PHYSICAL DEMANDS AND WORK ENVIRONMENT While performing the essential duties of this job, the employee must be able to stand, stoop, kneel, crouch, climb and lift up to 50lbs and shared weight up to 100lbs. Occasional exposure to airborne dust, high humidity and extremes of hot and cold are possible. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the essential duties of this job, the employee must be able to stand, stoop, kneel, crouch, climb and lift up to 50lbs and shared weight up to 100lbs. Occasional exposure to airborne dust, high humidity and extremes of hot and cold are possible. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PAY • 1st Shift: $19.30/Hour, • 1st Shift: 5AM - 1:30PM, • 3rd Shift: 9PM - 5:30PMBENEFITS: (Full time employees), • Health, dental and vision insurance, • 401(k) plan - including employer match, • Pay time off, • Life insurance IVsCD9tJX4

• Job Identification 116998, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Position Overview: As a Sr. Maintenance Technician, you'll be part of our Aerospace Manufacturing team located in Fullerton, CA on 1st Shift. Key Responsibilities: ' Ensure the effective operation of plant machinery by executing preventive maintenance tasks, including adjustments on motors, conveyors, control systems, and various production machines. ' Utilize advanced troubleshooting techniques to identify root causes of problems through observation and systematic analysis. ' 'Program, set up, and fine-tune CNC machine control systems and human-machine interfaces (HMIs).'' ' Conduct repairs on high-voltage systems (480V, 220V, 120V) and low-voltage circuits, as well as hydraulic and pneumatic components.''' ' Maintain comprehensive documentation for preventive maintenance activities, equipment specifications, and repair records. ' Collaborate with engineering and production teams to implement equipment modifications and enhancements. ' Mentor and provide guidance to junior maintenance staff, fostering skill development.'' ' Maintain an organized inventory of replacement parts and tools to ensure prompt repairs ' Uphold rigorous adherence to all safety standards and protocols, actively participating in safety training. Follow established written specifications, procedures, and drawings to execute tasks effectively. , Basic Qualifications: ' A minimum of 5 years of experience in maintenance mechanics, focusing on CNC machinery. ' Strong knowledge of CNC programming languages (G-code, M-code) and various control systems (Fanuc, Siemens, Haas, etc.). ' Expertise in troubleshooting and repairing electrical, electronic, hydraulic, and pneumatic systems. ' Proven ability to interpret complex diagrams, manuals, and technical specifications. ' Familiarity with analytical tools and methodologies related to PLC and electrical systems. ' Exceptional problem-solving, analytical, and critical thinking capabilities. ' Strong mechanical skills and dexterity. ' A commitment to safety practices and continuous improvement. ' Ability to work independently and collaboratively within a team environment. Preferred Qualifications: ' Certification in CNC machine maintenance or programming.'' ' Familiarity with predictive maintenance methodologies and tools. ' Knowledge of Industry 4.0 advancements and data-driven maintenance approaches. ' Experience with documentation processes for maintenance procedures and product equipment. ' Ability to read and understand detailed instructions and specifications. 'Experience with various welding techniques (TIG, MIG) is a plus. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116974, • Job Category Finance, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time As a Plant Controller, Aerofit, you'll be part of our Industrial Finance Controllership team working as an on-site employee at our Fullerton, CA location. Key Responsibilities: ' Financial Governance & Internal Controls. ' Maintain accurate financial statements in strict accordance with US GAAP and corporate policies. ' Lead comprehensive month-end and quarterly closing processes to ensure timely and accurate reporting. ' Drive full compliance with Sarbanes-Oxley (SOX) requirements and continuously improve the site's internal control environment. ' Oversee inventory management, including the coordination of year-end physical inventories, cycle counting programs, and the development of robust control procedures. ' Manage the fixed asset sub-ledger, including expenditure monitoring, Construction-in-Progress (CIP) reviews, and asset audits. ' Proactively identify accounting risks and implement effective mitigation strategies. ' Operational Business Partnershi. ' Collaborate with the Plant Manager and operations team to provide transparent, actionable financial reporting. ' Develop and manage annual budgets and periodic financial forecasts. ' Analyze plant performance and variances, translating data into insights that drive operational improvements. ' Provide high-level scenario modeling and ad-hoc business case analysis to support strategic investment and ROI. ' Deliver financial presentations to plant leadership, business units, and corporate stakeholders. ' Standardize routine business processes to eliminate waste and drive value creation. Foster a culture of continuous improvement, accountability, and professional development within the finance and operations teams. , Basic Qualifications: ' Bachelor's degree in Accounting, Finance, or a related discipline. ' 7-10 years experience with proven track record in a manufacturing operations environment with deep knowledge of cost accounting.' ' Must have at least 5 years experience working in a manufacturing environment. ' Proficiency in financial statement analysis, product costing, and business case development. ' A strategic thinker who can work independently while collaborating across all levels of the organization. ' High integrity, a "continuous improvement" mindset, and the ability to thrive in an innovative, fast-paced environment. ' Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Preferred Qualifications: ' Experience with Epicor Avante and Hyperion Financial Management (HFM) is highly preferred. Salary Range: The base pay range for this position in California is $105,400.00 - $169,625.00/year. Pay is based on market location and may vary depending on job-related knowledge, skills, and experience. A sign-on payment may be provided as part of the compensation package, in addition to a full range of medical, financial, and/or other benefits, dependent on the position offered. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

As a Maintenance Technician IV, your primary responsibility will be maintaining and repairing production equipment ranging from high speed packaging and filling lines to specialized processing mixers and pumps. You will be a member of a team responsible for keeping production equipment operating with minimum downtime.Working within a highly regulated medical device manufacturing facility, you will adhere to structured SOPs in place that govern activites under an established Quality Management System. Work performed will support validated systems and processes and will be documented following cGMP principles. The production environment operates on a 24hr schedule and this role will carry "On Call" duties for late and off-shift equipment emergencies.The Maintenance Mechanic IV role is senior-level and carries leadership responsibilities. You will be expected to be an example to your peers while ensuring preventive maintenance and priority repair activities are completed timely within the department. You will assist management with special tasks that arise including: Kaizen, spare parts inventory management, and capital improvement initiatives. Working with minimal supervision, you will partner with other departments such as Engineering, Production, and Facilities to ensure priorities within the site are addressed and completed successfully. Location: This position must be based in Irvine, California and requires the employee to be located within commuting distance of the office. How You'll Make An Impact: • Performs scheduled equipment preventive maintenance (PM) tasks, completes all required documentation thrououghly and accurately. Manages open work orders within the CMMS to ensure all maintenance tasks are completed on time. Ensures all department KPIs are maintained to established goals., • Responsible for maintaining cGMP-compliant documentation in adherence to the Qualtiy Management System., • Assists in Capital Improvement Projects with coordinating contractors, prepping areas, and supporting normal business activities., • Leads by example to the other Maintenance Associates and fosters teamwork and knowledge sharing within the department to expand the overall capabilities of the team., • High School diploma or equivalent required. A technical 2 or 4yr degree is preferred., • 6+ years working in equipment maintenance or Associate degree with 5+ years experience preferred., • 4+ years working in a GMP environment with experience working in facilities/plant maintenance organization preferred., • Understanding of pneumatics, boilers, validated systems, and standby electrical generation systems is preferred., • Basic understanding of electrical systems and safety is required. Knowledge of mechanical systems, high-speed conveyance, and automated lines is preferred., • Knowledge of general shop tools and methodologies is required. Experience with RODI water generation systems and aseptic processing is preferred. Benefits: We're proud to offer a variety of options, including competitive medical plans for you and your family, free HSA funds, a new fertility offering with stipend, group life and disability, paid parental leave, 401k plus profit sharing, an employee stock purchase program, a new upgraded and streamlined mental health platform, extensive learning and development opportunities, education benefits, student debt relief program, pet insurance, wellness challenges and support, paid time off, Employee Resource Groups (ERG's), and more! Compensation: The estimated hourly rate for this position is $39.00 to $53.27 at the time of posting. Actual compensation will be provided in writing at the time of offer, if applicable, and is based on several factors we believe fairly and accurately impact compensation, including geographic location, experience, knowledge, skills, abilities, and other job permitted factors. This position is eligible for a variable annual bonus, which is dependent upon achievement of your individual objectives and Company performance. Who We Are: For 70 years, Bio-Rad has focused on advancing the discovery process and transforming the fields of science and healthcare. As one of the top five life science companies, we are a global leader in developing, manufacturing, and marketing a broad range of high-quality research and clinical diagnostic products. We help people everywhere live longer, healthier lives. Bio-Rad offers a unique employee experience with collaborative teams that span the globe. Here, you are supported by leadership to build your career and are empowered to drive change that makes an impact you can see. EEO Statement: Bio-Rad is an Equal Employment Opportunity/Affirmative Action employer, and we welcome candidates of all backgrounds. Veterans, people with physical or mental disabilities, and people of all race, color, sex, sexual orientation, gender identity, religion, national origin and citizenship status are encouraged to apply. Agency Non-Solicitation:Bio-Rad does not accept agency resumes, unless the agency has been authorized by a Bio-Rad Recruiting Representative. Please do not submit resumes unless authorized to do so. Bio-Rad will not pay for any fees related to unsolicited resumes. Fraud Alert: Bio-Rad has received reports of individuals posing as Bio-Rad recruiters to obtain information, including personal and financial, from applicants. Beware of these fake "recruiters" and job scams. ___ for more information on this scam and how to avoid it. #LI-PB1 Legal Entity: (USA_1000)Bio-Rad Laboratories, Inc.

• Job Identification 116165, • Job Category Operations, • Posting Date 02/12/2026, 11:16 PM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Howmet Fastening Systems (HFS) is seeking a Maintenance Technician II- 1st Shift for our Fullerton, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Job Description: Under the supervision of the Maintenance Manager, the Maintenance Technician position is accountable for: • Disassemble machines and take off parts for replacement or repair by using cranes, hoists, chain falls, hand tools, and jacks., • Examine or carry out tasks on broken machine parts and identify defective parts or give recommendations to supervisors on repair requirements., • Replace, fix, or realign machine parts and accessories in line with production specifications., • Put machine parts together after accomplishing maintenance and repair work., • Assists other maintenance team members in meeting department requirements while serving as a resource to production, engineering, and other plant personnel. Other individual maintenance craft knowledge considered a plus., • Work independently with little supervision., • Maintain a clean, organized, and safe work environment., • Exhibit outstanding ability to learn and comprehend the fundamentals of the functioning machines., • Excellent general understanding of hydraulic systems with display of mastery in troubleshooting by utilizing deductive reasoning and schematics, • High School Diploma, GED, apprenticeship, or equivalent preferred., • Strong communication skills - written and oral., • Electrical controls awareness a plus., • Knowledge of machine mechanics, pneumatics, hydraulics, blueprint reading, (welding and fabrication a plus) operation of machine tools used to make, modify and/or repair machine components., • Experienced and knowledge in maintaining and repairing injection presses., • Ability to lift 40 pounds, • Must be fluent in English, written and oral., • Ability to effectively work AND communicate as part of a cell team, • Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $18.82 to $31.43. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

• Job Identification 116956, • Job Category Operations, • Posting Date 04/08/2026, 12:00 AM, • Locations 1425 Acacia Ave, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Shift: Maintenance Technician - 2nd shift, 3:30pm - 12:00am Position Overview: As a Sr. Maintenance Technician, you'll be part of our team located in Fullerton, CA. Key Responsibilities: ' Ensure the effective operation of plant machinery by executing preventive maintenance tasks, including adjustments on motors, conveyors, control systems, and various production machines. ' Utilize advanced troubleshooting techniques to identify root causes of problems through observation and systematic analysis. ' Program, set up, and fine-tune CNC machine control systems and human-machine interfaces (HMIs). ' Conduct repairs on high-voltage systems (480V, 220V, 120V) and low-voltage circuits, as well as hydraulic and pneumatic components. ' Maintain comprehensive documentation for preventive maintenance activities, equipment specifications, and repair records. ' Collaborate with engineering and production teams to implement equipment modifications and enhancements. ' Mentor and provide guidance to junior maintenance staff, fostering skill development. ' Maintain an organized inventory of replacement parts and tools to ensure prompt repairs. ' Uphold rigorous adherence to all safety standards and protocols, actively participating in safety training. Follow established written specifications, procedures, and drawings to execute tasks effectively. , Basic Qualifications ' This position requires a minimum of a high school diploma or general education degree. ' A minimum of 5 years of experience in maintenance mechanics, focusing on CNC machinery. ' Strong knowledge of CNC programming languages (G-code, M-code) and various control systems (Fanuc, Siemens, Haas, etc.). ' Expertise in troubleshooting and repairing electrical, electronic, hydraulic, and pneumatic systems. ' Proven ability to interpret complex diagrams, manuals, and technical specifications. ' Familiarity with analytical tools and methodologies related to PLC and electrical systems. ' Exceptional problem-solving, analytical, and critical thinking capabilities. ' Strong mechanical skills and dexterity. ' A commitment to safety practices and continuous improvement. ' Ability to work independently and collaboratively within a team environment. • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. ' A minimum of (5) years of relevant industrial experience in a manufacturing environment is preferred. ' Certification in CNC machine maintenance or programming. ' Familiarity with predictive maintenance methodologies and tools. ' Knowledge of Industry 4.0 advancements and data-driven maintenance approaches. ' Experience with documentation processes for maintenance procedures and product equipment. ' Ability to read and understand detailed instructions and specifications. Experience with various welding techniques (TIG, MIG) is a plus. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116839, • Job Category Operations, • Posting Date 04/16/2026, 08:06 PM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time Summary The Sr. Planning Manager is responsible for leading end-to-end planning activities across the manufacturing value chain, including raw material procurement planning, production scheduling, and shipping coordination. This role ensures alignment between customer demand, operational capacity, and supply chain execution in a complex manufacturing environment. This position plays a critical role in managing customer expectations, reducing past due orders and backlog, and driving operational excellence through effective planning strategies, cross-functional collaboration, and data-driven decision-making. Essential Duties and Responsibilities * Responsible for maintaining manufacturing planning parameters and process groups, providing accurate lead times to Sales and Customer Service, ensuring effective use of ERP systems, and overseeing inventory availability. * Lead integrated planning across raw materials, production, and shipping to ensure on-time delivery and optimized inventory levels. * Develop and execute production plans aligned with customer demand, plant capacity, and material availability. * Manage and reduce backlog and past due orders through proactive planning and cross-functional coordination. * Collaborate closely with Procurement, Operations, Quality, Customer Service and Shipping & Receiving to ensure alignment and execution of priorities. * Interface directly with customers to manage expectations, communicate constraints, and resolve critical demand issues. * Analyze demand forecasts and adjust planning strategies to mitigate risks and ensure continuity of supply. * Drive improvements in planning accuracy, scheduling efficiency, and overall supply chain performance. * Identify and resolve bottlenecks across Bar, Wire, and Sheet Metal operations. * Ensure effective use of planning systems (e.g., ERP/MRP such as QAD) and maintain data integrity. * Lead continuous improvement initiatives focused on operational flow, capacity utilization, and service levels. * Ensure compliance with safety, environmental, and company policies, including the Howmet Guide to Business Conduct. * Demonstrate a knowledge of, and commitment to, HFS manufacturing principles and techniques. Supervisory Responsibilities * Lead and develop a team of planners, schedulers and parts movers to deliver excellent performance in a fast-paced work environment. * Set clear performance expectations and provide ongoing coaching and feedback, helping the team with their priorities and supporting them to facilitate the execution and deliverables. * Drive accountability and foster a high, results-oriented culture. * Support talent development and succession planning within the team. * Build an engagement, committed team guided by company values, mission and vision. * Ensure compliance with federal state, and local employment laws, as well as company policies, fostering a fair and respectful work environment , Basic Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Bachelor's Degree from accredited institution, • Proficient with computer systems and programs (MS-Word, MS-Excel, MS-PowerPoint, querying databases, ERP systems. etc.) Proven experience managing complex supply chains and high-mix, high-volume production environments * Demonstrated ability to manage customer demands, backlog, and delivery performance • 7+ years of experience in planning, supply chain, or operations within manufacturing environment with complexity and fast-paced process. Bachelor's degree in supply chain, engineering, business, or related field, preferably with APICS certification (CPIM, CSCP) * Experience in aerospace and/or automotive manufacturing preferred * Experience working with Fastening processes (Bar, Wire and/or Sheet Metal) process is a strong plus * Bilingual (English/Spanish) is a plus * Experience in lean manufacturing or continuous improvement methodologies is a plus Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to: * Use hands to finger, handle, or feel and reach with hands and arms. * Frequently required to stand and sit. * Occasionally required to walk and talk or hear. * Occasionally lifts and/or moves up to 30 pounds. * Specific vision abilities required by this job include close vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. * The noise level in the work environment is usually moderate; however, it may be occasionally loud enough where hearing protection is required. * Work hours - typically 5 days per week, 8 hours per day. Additional hours may be required based on business needs and operational demands. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $130k to $180k. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 116344, • Job Category Engineering, • Posting Date 02/24/2026, 01:09 AM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None, • LinkedIn Recruiter Tag #LI-LB1 We are seeking highly motivated and energetic students for the 2026 summer intern program at Howmet Fastening Systems. The program consists of 10-12 weeks of structured hands-on training involving plant tours, seminars, networking events, and projects selected to add direct value to the business. At the conclusion of the program, interns will present their projects to plant managers, supervisors, and mentors. An internship at Howmet Fastenings Systems will provide an invaluable experience that you can utilize in any roles, and it's Howmet Aerospace's goal to evaluate our interns for potential entry-level openings. This position will report directly to the site's Engineering Manager with daily coaching from the team's leaders, engineers, and technicians. The Howmet Aerospace Summer Internship Program will include engaging in impactful projects to assist the company and the student's professional development. * Categorize nutforming tooling for Top 35 dies. * Create or modify tooling layouts for nutforming and formax dies. ADDITIONAL REQUIREMENTS: • Able to work full time, onsite for a minimum of 12 consecutive weeks beginning in May or June 2026, • Able to provide own transportation for position at Fullerton, CA, • Must be enrolled in a bachelor's degree or graduate degree program in an engineering discipline by the start of employment., • Minimum completion of Sophomore level coursework from an accredited institution., • Experience with Microsoft Office Suite (Excel, Word, Teams, etc.). Must be proficient working in a Microsoft systems environment. Excel is required. SolidWorks or equivalent 3D modeling is required. • Basic 5S recommended., • Prior Internship work experience, • Strong verbal and written communication skills

• Job Identification 117114, • Job Category Finance, • Posting Date 04/20/2026, 08:40 PM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None Accountable for supporting the Director of Operations in the development of financial plans and forecasts and the analysis of operational results. Provide leadership and direction to the finance department staff. Develop and maintain a comprehensive understanding of the Location's business and related issues and maintain ongoing communications with HFS headquarters finance organization. Duties and Responsibilities: • Financial accountability for two separate manufacturing facilities located on the same site, • Perform forecasts, profit and COGS analysis, cost management, inventory control, capital investment requests, working capital, and all financial reporting requirements., • Function as an integral part of the facility leadership team and business partner to the Director of Operations., • Develop appropriate accounting, analysis and reporting formats, procedures/policies, and schedules to support the reporting and analysis process., • Participate in ABS/TPS initiatives and serve as the key source for improvements and waste elimination in facility administrative functions., • Prepare and present narratives, graphs, and other reports as required to support business reviews management and customer presentations., • Identifying key levers to drive business improvement and providing leadership to ensure implementation of business improvement opportunities., • Co-ordination of the capital appropriation process and post-project reviews., • Determine, in conjunction with plant management, targeted goals for performance measures of quality, productivity, delivery, cycle time, inventory optimization and profitability., • Complying with Howmet and business unit financial reporting requirements and ensuring completion of Howmet's Sarbanes-Oxley requirements for internal controls., • Strong organizational/analytical and decision-making skills in relation to managing multiple projects with tight deadlines in a high pressure/high intensity environment., • Ability to dig for details and work on challenging projects., • Requires a Bachelor's degree in finance or business, with a major emphasis in finance or accounting., • Minimum of 10+ years related financial/controller leadership experience in a manufacturing environment, • Location/Plant Controller experience for a manufacturing facility with at least $150 million in annual sales. Must have functioned as a senior manager, reporting to the business unit head and at least 2 year's supervisory experience with the ability to manage and develop Staff (Financial, Payroll and Operational)., • Strong knowledge and understanding of GAAP, with solid analytical and strategic planning skills., • High proficiency in using MS Office software, experience with Oracle, Hyperion, or similar systems, project management, multi-tasking, and developing/executing data queries. Advanced Excel and PowerPoint skills, • MBA, CMA and/or CPA, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • The employee is responsible to maintain fitness-for-duty while holding the above-described position and should be able to perform the essential tasks of the position in a safe, appropriate and effective manner. This refers to the physical, mental and emotional duties of the job., • Reaching above and below, stooping, kneeling, crouching, and bending., • Needs a high degree of concentration in a busy office environment., • Need to be able to wear safety steel toe shoes and walk around at shop floor environment as needed. The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $130,000 to $180,000. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email , Howmet Fastening Systems (HFS) is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment.

• Job Identification 115437, • Job Category Operations, • Posting Date 01/07/2026, 07:41 PM, • Locations 800 S State College, Fullerton, CA, 92831, US (On-site), • Job Schedule Full time, • Remote Work Schedule Availability? None Howmet Fastening Systems (HFS) is seeking a Maintenance Technician I for our Fullerton, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Job Description: Under the supervision of the Maintenance Manager, the Maintenance Technician position is accountable for: • Disassemble machines and take off parts for replacement or repair by using cranes, hoists, chain falls, hand tools, and jacks., • Examine or carry out tasks on broken machine parts and identify defective parts or give recommendations to supervisors on repair requirements., • Replace, fix, or realign machine parts and accessories in line with production specifications., • Put machine parts together after accomplishing maintenance and repair work., • Assists other maintenance team members in meeting department requirements while serving as a resource to production, engineering, and other plant personnel. Other individual maintenance craft knowledge considered a plus., • Work independently with little supervision., • Maintain a clean, organized, and safe work environment., • Exhibit outstanding ability to learn and comprehend the fundamentals of the functioning machines., • Excellent general understanding of hydraulic systems with display of mastery in troubleshooting by utilizing deductive reasoning and schematics, • High School Diploma, GED, apprenticeship, or equivalent preferred., • Strong communication skills - written and oral., • Electrical controls awareness a plus., • Knowledge of machine mechanics, pneumatics, hydraulics, blueprint reading, (welding and fabrication a plus) operation of machine tools used to make, modify and/or repair machine components., • Experienced and knowledge in maintaining and repairing injection presses., • Ability to lift 40 pounds, • Must be fluent in English, written and oral., • Ability to effectively work AND communicate as part of a cell team, • Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. Benefits/Salary: The position includes competitive wages and a comprehensive benefits package available day one of hire, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $17.64- $29.46. , Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at ___. Follow: ___, ___, ___, ___, and ___. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email

POSITION SUMMARY: The Maintenance Technician III works both independently and collaboratively with plant personnel to perform preventive, predictive, and routine maintenance tasks. This role is responsible for troubleshooting equipment breakdowns and performing repairs on general production machinery. The Technician III also provides guidance and support to Maintenance Technicians I and II and coordinates work with external contractors as needed. POSITION ESSENTIAL FUNCTIONS INCLUDE BUT ARE NOT LIMITED TO: • Diagnoses, tests, maintains and repairs electrical and electronic equipment, such as:, • Hydraulic presses and, • Hydraulic, pneumatic and mechanical systems and components., • Variable speed AC and DC motor Drives, • Obey all plant safety rules and procedures at all times. Including wearing proper PPE., • Install, repair and service electrical and mechanical and hydraulic equipment, production equipment, and any other equipment related to operations or maintaining the facilities., • Effectively troubleshoot using manuals, schematics, and diagramsto diagnose and eliminate problems as they arise, • Understand fluid power systems; troubleshoot, install, and repairpower units, valve operation, cylinders, motors, pumps, • Perform preventative maintenance on equipment using standard practices and procedures, • Maintain work areas, tools, and equipment in a clean and orderlycondition, • Follow all company and equipment safety guidelines and ethics rules, • Able to work with no supervision or limited supervision. ESSENTIAL SKILLS & ABILITIES: • Mechanical aptitude in complex mechanical assemblies including precision measurements., • Able to read and interpret blueprints., • Excellent troubleshooting and problem-solving capabilities., • Analytical and detail-oriented mindset., • Excellent oral and written communication skills with the ability to work collaboratively with cross-functional teams., • Time management must be able to plan and execute routine maintenance activities as well as respond to troubleshooting requests and unexpected equipment issues., • Proactivecarry out preventative checks and routine inspections. Must be able to see potential issues, take corrective measures and anticipate ongoing needs. BASIC REQUIRED SKILLS (Equivalent combinations of education, licenses, certifications and/or experience will be considered): • 5 or more years of experience, • Good understanding of hydraulic equipment, • Electrical and mechanical skills, • Ability to work with power tools., • Knowledge of equipment - Identify components on a drawing and work as directed, • Understanding Equipment Function- can change out components as directed - basic troubleshooting, • Understands how the electrical, program, hydraulics all work together and can troubleshoot independently. Compensation Range: $72,800-$81,120 POSITION SUMMARY: The Maintenance Technician III works both independently and collaboratively with plant personnel to perform preventive, predictive, and routine maintenance tasks. This role is responsible for troubleshooting equipment breakdowns and performing repairs on general production machinery. The Technician III also provides guidance and support to Maintenance Technicians I and II and coordinates work with external contractors as needed. POSITION ESSENTIAL FUNCTIONS INCLUDE BUT ARE NOT LIMITED TO: • Diagnoses, tests, maintains and repairs electrical and electronic equipment, such as:, • Hydraulic presses and, • Hydraulic, pneumatic and mechanical systems and components., • Variable speed AC and DC motor Drives, • Obey all plant safety rules and procedures at all times. Including wearing proper PPE., • Install, repair and service electrical and mechanical and hydraulic equipment, production equipment, and any other equipment related to operations or maintaining the facilities., • Effectively troubleshoot using manuals, schematics, and diagramsto diagnose and eliminate problems as they arise, • Understand fluid power systems; troubleshoot, install, and repairpower units, valve operation, cylinders, motors, pumps, • Perform preventative maintenance on equipment using standard practices and procedures, • Maintain work areas, tools, and equipment in a clean and orderlycondition, • Follow all company and equipment safety guidelines and ethics rules, • Able to work with no supervision or limited supervision. ESSENTIAL SKILLS & ABILITIES: • Mechanical aptitude in complex mechanical assemblies including precision measurements., • Able to read and interpret blueprints., • Excellent troubleshooting and problem-solving capabilities., • Analytical and detail-oriented mindset., • Excellent oral and written communication skills with the ability to work collaboratively with cross-functional teams., • Time management must be able to plan and execute routine maintenance activities as well as respond to troubleshooting requests and unexpected equipment issues., • Proactivecarry out preventative checks and routine inspections. Must be able to see potential issues, take corrective measures and anticipate ongoing needs. BASIC REQUIRED SKILLS (Equivalent combinations of education, licenses, certifications and/or experience will be considered): • 5 or more years of experience, • Good understanding of hydraulic equipment, • Electrical and mechanical skills, • Ability to work with power tools., • Knowledge of equipment - Identify components on a drawing and work as directed, • Understanding Equipment Function- can change out components as directed - basic troubleshooting, • Understands how the electrical, program, hydraulics all work together and can troubleshoot independently. Compensation Range: $72,800-$81,120

This Jobot Job is hosted by: Amber Wood Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: Our services include construction management, fabrication, erection, mechanical installation, and plant maintenance for heavy industrial, commercial, and roadway projects, as well as a full spectrum of golf course construction and management services. Why join us? Medical Insurance HSA with Employer contributions Dental Insurance Vision Insurance Universal Life and Long-term Care Insurance Group and Voluntary Life Insurance Short Term/Long Term Disability Critical Illness Plan Employee Assistance Program Paid Vacation Paid Holidays 401(k) with Employer Match Job Details Senior/Lead Piping Engineer – EPC Projects (Metals Sector) We are seeking a highly experienced Senior/Lead Piping Engineer with a strong background in large-scale EPC (Engineering, Procurement & Construction) projects within the metals and minerals sector. The successful candidate will provide technical leadership and oversight of piping design and execution for complex industrial plants, including smelters, refineries, and processing facilities. Key Responsibilities • Lead piping design, layout, and execution throughout all EPC phases (FEED, detailed design, procurement, construction, commissioning)., • Oversee development of 3D models, piping layouts, isometrics, and material specifications., • Conduct and review stress analysis and flexibility studies in compliance with ASME, ANSI, ISO, and other applicable codes., • Approve Material Take-Offs (MTOs), technical requisitions, and vendor documents., • Manage subcontractors and coordinate with process, mechanical, structural, and procurement teams., • Provide technical guidance during construction, hydrotesting, and commissioning., • Act as the primary technical interface with clients and stakeholders, resolving complex piping issues., • Bachelor’s degree in Mechanical or Piping Engineering (Master’s preferred)., • 15+ years’ experience in piping design/engineering, with at least 8 years in EPC projects for metals/mining/heavy industrial facilities., • Expertise in PDMS, SP3D, CAESAR II, AutoPIPE, or equivalent software., • Deep knowledge of international piping codes and standards (ASME, ANSI, API, ISO, etc.)., • Strong leadership, communication, and project management skills. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Maintenance and Reliability Manager This Jobot Job is hosted by: Cody Timm Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $110,000 - $120,000 per year A bit about us: Our client is an established lumber and processing plant with locations across North America! Why join us? • Competitive compensation package, • Family-owned business with excellent employee benefits, • 401K matching, • PTO and paid holidays, • Well-established and stable company offering growth and stability Job Details Responsibilities: • Develop, implement, and manage the maintenance and reliability strategy for all equipment and systems, ensuring optimal performance and minimal downtime., • Oversee the use and optimization of our CMMS, ensuring all data is accurately recorded and utilized to drive maintenance and reliability improvements., • Implement and manage a robust preventative maintenance program, reducing the risk of unplanned downtime and increasing equipment longevity., • Lead and manage a team of maintenance technicians, fostering a culture of continuous improvement and high performance., • Collaborate with production teams to identify potential areas of improvement and implement solutions to enhance efficiency and productivity., • Ensure all maintenance and reliability activities comply with industry safety standards and regulations., • Manage maintenance budgets, ensuring effective use of resources and cost control., • Conduct regular audits and inspections of equipment and systems, identifying any potential issues or areas for improvement., • A minimum of 4 years’ experience in a maintenance or reliability management role within the construction industry, preferably within a sawmill or timber/lumber manufacturing setting., • Expert knowledge of CMMS, with experience in data analysis and system optimization., • Demonstrable experience in implementing and managing preventative maintenance programs., • Strong understanding of mechanical maintenance and pneumatics within an industrial manufacturing setting., • Excellent leadership and management skills, with the ability to lead a team to high performance., • Strong problem-solving skills, with the ability to identify and implement effective solutions., • Excellent communication skills, with the ability to clearly convey complex technical information., • Strong budget management skills, with experience in cost control and resource allocation., • A commitment to safety, with knowledge of industry safety standards and regulations., • Relevant qualifications in a related field would be advantageous. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy