Trabajos process technology en Charleston, South CarolinaCrear alertas

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) Structural Analysis Engineer for our Wing & Empennage Life Cycle Product Team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Perform stress analysis on Boeing 787 Wing and/or Empennage primary structures using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews supplier documents in support of supplier technical oversight including engineering drawings, analysis, test plans, procedures, and reports. Develops, integrates and documents structural requirements to establish the Wing and/or Empennage primary structure designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify the primary structures meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with international partners/suppliers. Actively supports the growth and development of a new engineering organization. Works under general direction. . Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 5+ years of related work experience or an equivalent combination of education and experience 3+ years of experience performing stress analysis on wing, empennage, or related structures 1+ years of experience performing stress analysis on composite structures Prior experience with manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 5+ years of experience working on wing or empennage structures such as Wing tips, wing leading or trailing edges, wing center section, wing box, wing join, vertical, or horizontal stabilizers Experience developing certification related documentation Hands on experience with fabrication of metallic and composite structures Experience working as the prime technical contact with international suppliers/partners responsible for aircraft primary or other related heavy structures Part 21 and Part 25 Code of Federal Regulations knowledge and experience interacting with Federal Regulators Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced (Level 3): $103,700 – $140,300 Applications for this position will be accepted until Nov. 30, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for Associate (Level 2) Structures Design Engineers for our Wing & Empennage Life Cycle Product Team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structures Design Engineer. Primary Responsibilities: • Assists to develop, integrate and document structural requirements to establish the wing and/or empennage design., • Develops, maintains and modifies structural designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle., • Performs tests to validate and verify systems and components meet requirements and specifications., • Assists with supplier development, test and production activities and coordination with the supplier to optimize the design and achieve program goals., • Supports investigation of emerging technologies to develop concepts for future product designs to meet projected requirements., • Supports the development of certification related documentation for CFR Part 25 Type Cert projects., • Collaborates on projects with international partners/suppliers., • Actively supports the growth and development of a new engineering organization., • Works under direct supervision. Basic Qualifications (Required Skills/ Experience) • Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences), • 2+ years of related work experience or an equivalent combination of education and experience, • 1+ years of experience with aircraft structural design Experience working in a Model Based Design (MBD) environment Preferred Qualifications (Desired Skills/Experience) • 1+ years of experience with design of composite structures Experience with CATIA and ENOVIA., • Prior experience with manufacturing/production,, • Prior design experience on wing or empennage structures such as wing tips, wing box, wing center section, leading/trailing edges, horizontal stabilizer or vertical stabilizers. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay Summary Range: Associate (Level 2) 85,000-115,000 Applications for this position will be accepted until Nov. 24, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is seeking highly motivated, organized, and strategic individuals for Customer Engineers (Experienced and Senior) to join our 787 Account Management team in North Charleston, South Carolina. Customer Engineering Account Managers are the primary technical interface between customers and Boeing Commercial Airplanes responsible for defining the contractual airplane configuration. As the authority for the contractual configuration, one will leverage their customer and market insights to curate experiences and solutions that wildly surpass customer’s aspirations and drive a preference for Boeing products. In this position, one will establish and maintain a relationship with airplane customers and guide them through the development, management, and delivery of their airplane configuration. Our teams are currently hiring for a broad range of experience levels including Experienced and Senior Level Engineers. Position Responsibilities: • Understand customer requirements and communicate their priorities within the Boeing Company., • Represent the Boeing Company to the customer and act as the primary technical contact for their configuration definition., • Frequently interact with Boeing Sales, Marketing, Contracts and airplane program leadership., • Lead the configuration development, management, and change processing for all stages of airplane development from pre-proposal to delivery., • Assist Boeing and the customer in resolving technical issues during airplane delivery, document unresolved customer issues, and facilitate a positive customer delivery experience., • Interact with domestic and international customers and suppliers., • Coordinate with diverse technical and business organizations within Boeing., • Must be able to travel both domestically and internationally at approximately 25% of the time, as needed., • May require working off-hours, weekends and/or holidays to support airplane delivery milestones. Work Authorization Statement: This position is expected to be 100% onsite. The selected candidate will be required to work onsite at our North Charleston, SC location. Basic Qualifications (Required Skills/Experience): • Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement., • Education from an institution accredited by the Accreditation Board for Engineering and Technology (ABET) is required., • 5 or more years' related work experience or an equivalent combination of technical education and experience., • 5 or more years’ of experience working for Boeing, airlines, aircraft lessors and/or heavy maintenance organizations. Preferred Qualifications (Desired Skills/Experience): • 9 or more years’ related work experience or an equivalent combination of education and experience., • Experience in Aerospace., • Experience and familiarity with airplane configuration processes and procedures., • Expertise in resolving cross-functional and cross-program technical issues., • Familiarity with design, development, and certification of new features, such as seats, galleys, lavatories, in-flight entertainment, connectivity options, flight deck avionics, monuments, cargo systems and lights., • Experience applying systems engineering and project management best practices., • Excellent oral and written communication skills. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process to all job descriptions moving forward. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union: This is not a union-represented position. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: • Experienced (Level 3): $112,200 - $151,800, • Senior (Level 4): $138,850 - $185,150 Additional Information: All information provided will be checked and may be verified. Applications for this position will be accepted until Nov. 15, 2026 Export Control Requirements: This is not an Export Control position. Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) Structures Design Engineering for our Wing & Empennage Life Cycle Product Team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Develops, integrates and documents structural requirements to establish the wing and/or empennage design. Develops, maintains and modifies structural designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates analytical and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve the effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 5+ years of related work experience or an equivalent combination of education and experience 3+ years of experience with aircraft structural design 1+ years of experience with design of composite structures Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 5+ years of experience working on wing or empennage structures such as Wing tips, wing leading or trailing edges, wing center section, wing box, wing join, vertical, or horizontal stabilizers Expertise using CATIA and Model Based Definition (MBD) for primary structure design. Experience designing and qualifying composite primary structures, including laminate design, ply-drop strategies, and structural strength considerations Hands on experience with fabrication of metallic and composite structures Part 21 and Part 25 Code of Federal Regulations knowledge and experience interacting with Federal Regulators Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level: $105,750 - $129,250 Applications for this position will be accepted until Nov. 30, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is hiring for Product Review Engineers (Associate or Mid-Level) (Liaison Engineers) to join the 787 Production Engineering team located in North Charleston, SC. This position includes a 9-to-12-month Boeing Training Rotation Program and will require a flexible schedule, which may involve assignments on 1st, 2nd, or 3rd shift, as well as occasional overtime, weekends, or holidays based on business needs. The Product Review Engineers will perform/support troubleshooting, Root Cause Corrective Action (RCCA) technical analysis, and provide solutions to non-conforming products. They will work directly with cross functional and production engineering teams to meet production program objectives. This position involves daily exposure to a factory environment which includes stairs, trip hazards, high noise areas, chemical hazards (breathing and handling), and entering airplanes during their many stages of building. Our team is currently hiring for a broad range of experience levels including Associate (Level 2) and Mid-Level (Level 3) Product Review Engineers. Position Responsibilities: Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle Analyzes, conducts root cause analysis and develops dispositions for design non-conformances Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution Develops and implements product/process improvements Supports Integrated Product Teams (IPT) and participates in design reviews Represents the engineering community in the build through postproduction environment Ensures supplier and build partner compliance with Boeing standards Develops customer correspondence for continued safe operation and maintenance of equipment Participates in on-site disabled product repair teams and accident investigation or support team Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards Conducts simple static strength analysis Develops and implements product/process improvements Basic Qualifications (Required Skills/Experience): Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics or Chemistry or non-US equivalent qualifications directly related to the work statement. Applicants must have completed all degree requirements by the application date. 1 or more years of experience in a professional engineering role Must be willing to work variable shifts, including weekends, holidays, and overtime Preferred Qualifications (Desired Skills/Experience): (Mid-Level Level 3): 5+ years of related work experience or an equivalent combination of education and experience ABET accredited degree Current or Previous Member of the Materials Review Board (MRB) Previous Aerospace or Marine repair, overhaul, maintenance, and/or engineering experience Experience troubleshooting complex integrated systems Experience interpreting and creating strength analyses for metals and composite materials Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range for Associate Level (Level 2): $85,000 - $115,000 Summary Pay Range for Mid-Level (Level 3): $103,700 - $140,300 Applications for this position will be accepted until Nov. 21, 2026 Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structures Design Engineer for our Wing & Empennage Life Cycle Product Team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Develops, integrates and documents structural requirements to establish the wing and/or empennage design. Develops, maintains and modifies structural designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Leads performance, integration and analysis of tests to validate and verify the structural design meets requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Assists with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with international partners/suppliers. Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators Works under minimal direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 9+ years of related work experience or an equivalent combination of education and experience 5+ years of experience with aircraft structural design 3+ years of experience with design of composite structures Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 7+ years of experience working on wing or empennage primary structure such as Wing tips, wing leading or trailing edges, wing center section, wing box, wing join, vertical, or horizontal stabilizers 5+ years of experience performing the basic qualifications in a lead capacity working under minimal direction Experience designing and qualifying composite primary structures, including laminate design, ply-drop strategies, and structural strength considerations Hands on experience with fabrication of metallic and composite structures Current or prior DER/AR/E-UM Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay Summary Range: $129,600 - $158,400 Applications for this position will be accepted until Nov. 30, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Explore opportunities with Amedisys, part of the Optum family of businesses. We provide home health, hospice and community-based services that help people receive quality care where they feel most comfortable: at home. Rooted in personalized care, we support patients and provide comfort through each stage of their health journey, while building trusted relationships along the way. Find a home for your career here. Join us and embrace a culture of Caring. Connecting. Growing together. As the Clinical Manager, you will provide leadership, supervision, and coordination of therapy services to ensure high-quality, compliant, and cost-effective patient care, while maintaining fiscal responsibility, facilitating patient care communication, and supporting referrals, scheduling, patient visits, and documentation as needed. Primary Responsibilities: • Recommends employment decisions for staff to the director of operations, including decisions to hire, fire, advance, promote or change status., • Responsible for overall quality of patient care and clinical performance of nurses and aides., • Organizes clinical operations for the care center., • Reviews requests for services and determines patient eligibility/suitability for home care services. Works with intake in coordinating patient referrals and admissions., • Oversees scheduling., • Oversees payor verification and precertification requirements., • Reviews documentation of other staff members and ensures missing, incomplete and/or untimely documentation issues are resolved., • Assists clinicians in establishing immediate and long-term patient goals, setting priorities and developing Plan of Care (POC)., • Regularly evaluates the needs of the patient and makes necessary revisions to the plan of care in collaboration with clinicians., • May provide direct patient care on an infrequent basis in times of emergency., • Participates in the on-call process., • Assists with training of staff to ensure quality care, compliance and fiscal responsibility., • Participates in the investigation and resolution of patient/family/physician concerns. You'll be rewarded and recognized for your performance in an environment that will challenge you and give you clear direction on what it takes to succeed in your role as well as provide development for other roles you may be interested in. Required Qualifications: • Associate or bachelor's degree in nursing., • Current RN license, specific to the state(s) you are assigned to work., • 1+ year of clinical RN experience in home health or hospice., • 1+ year of RN management experience. Current CPR certification. Pay is based on several factors including but not limited to local labor markets, education, work experience, certifications, etc. In addition to your salary, we offer benefits such as, a comprehensive benefits package, incentive and recognition programs, equity stock purchase and 401k contribution (all benefits are subject to eligibility requirements). No matter where or when you begin a career with us, you'll find a far-reaching choice of benefits and incentives. The salary for this role will range from $73,188 to $109,782 annually based on full-time employment. We comply with all minimum wage laws as applicable. At UnitedHealth Group, our mission is to help people live healthier lives and help make the health system work better for everyone. Together, we are shaping the future of healthcare by harnessing technology and innovation to make care simpler to navigate, more affordable and more connected for the people we serve. We are committed to creating an inclusive workplace where everyone feels welcomed, valued, heard and respected, empowering people to bring their authentic selves to work and strengthening our collective impact through diverse talents, backgrounds, experiences and perspectives. UnitedHealth Group and its affiliated brands are an Equal Employment Opportunity employer under applicable law and qualified applicants will receive consideration for employment without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, or protected veteran status, or any other characteristic protected by local, state, or federal laws, rules, or regulations. UnitedHealth Group and its affiliated brands are a drug-free workplace. Candidates are required to pass a drug test before beginning employment.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking a Mid-Level Propulsion Fuels Systems Engineer to join our Propulsion 787 Program Engineering team in North Charleston, SC. The Propulsion Fuels Systems Engineer will have significant involvement in both engineering design/integration and hands-on factory and delivery support activities for 787 aircraft coming through the Charleston final assembly and delivery centers. In joining us you will be part of a multi-disciplined team of engineers, operating in an agile environment, using the latest tools and methodologies. Develop your technical competence as well as your leadership skills at a company with huge potential for long-term career growth. At Boeing, we value your curiosity, your determination, and your imagination. If this vision and mission responsibility resonates with you, apply and join our Boeing South Carolina team of Propulsion Fuels Systems Engineers today! Primary Responsibilities: Lead integration of propulsion/fuels changes with other airplane systems and develop design solutions to support product improvements. Maintain Boeing design oversight for supplier‑provided fuel system components and review/approve supplier drawings, engineering change proposals, and configuration updates. Engage suppliers to define, plan, and execute qualification testing and to manage supplier‑initiated design modifications. Manage Boeing Specification Control Document (SCD) requirements, including revisions and new SCD development as needed. Provide on‑site factory and delivery support in North Charleston, troubleshooting fuel system issues on the production line, supporting production holds, pre‑delivery inspections, and delivery acceptance activities. Investigate and resolve fleet, production, and supplier issues (Service Requests, Notices of Escape, Non‑Conformances, Engineering Liaison Requests, Change Notices, etc.) to maintain production flow and delivery schedules. Coordinate, develop, and publish test plans, procedures, and reports; perform analysis using test, certification, and production data to support timely dispositions. Support safety, compliance, and airworthiness investigations and create/update system safety analyses and airworthiness limitations for the 787. Coordinate across internal partners (EME, RM&T, ASE, Structures/Stress, Flight Test, Service Engineering, Production, Ground Ops, Regulatory Administration, etc.) to meet project goals and aircraft delivery milestones. Communicate project status, risks, issues, and opportunities to Propulsion and Program leadership and represent Boeing professionally with suppliers, delivery teams, and external partners. Able to work under general supervision and self-direct work based on needs of customers, product, and stakeholders. Strong technical skills and demonstrated ability to understand complex problems. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of relevant work experience Preferred Qualifications (Desired Skills/Experience): 3+ years of experience in Propulsion Engineering Knowledge of airplane safety and certification is preferred Knowledge of airplane fuels systems and architecture Experience working on multi-disciplinary projects Experience working COSP process is preferred Strong project and time management skills; Must be able to manage and prioritize multiple projects in support of key milestones and aircraft delivery schedules Excellent communication skills; Ability to clearly communicate complex scenarios with internal and external Leaders and technical SMEs Familiar with ENOVIA, CSDT, REDARS, ETAC, IVX, IVT, CATIA (PDM a plus) Familiar with establishing RCCAs / BPSMs / fault trees / cause maps Able to represent the company professionally in demanding environments Able to work effectively with the entire value stream to accomplish desired results Able to work effectively with people from diverse backgrounds Able to independently develop innovative solutions that meet business targets Involvement with SCD Qualification Programs and Equipment Management is desired but not required Understanding of large transport category aircraft certification process is preferred Familiarity with CFR 25.981 and/or 25.1309 is preferred Some travel may be required Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $112,200 - $151,800 Applications for this position will be accepted until Nov. 20, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is seeking a Propulsion & Fuel System Engineer (Mid-Level or Senior) to join the 787 Propulsion Charleston Team in North Charleston, SC. This role combines engineering analysis, systems integration, and hands-on factory and delivery support at our Charleston final assembly and delivery centers and Charleston Propulsion center. You’ll work in a collaborative, multidisciplinary, agile environment using modern tools and practices, with strong opportunities for technical and leadership professional development. In addition, you will contribute to critical aircraft programs that directly affect safety, performance, and quality of customer aircraft deliveries. Help shape Fuel System performance and integration solutions, working closely with our engine and system suppliers to support production and delivery of 787 aircraft. Work with a supportive, innovative, and solution driven team focused on serving our customers and delivering products that connect people around the world. Our team is currently hiring for a broad range of experience levels including Mid-Level (Level 3) or Senior (Level 4) System Engineers. Primary Responsibilities: Lead integration of propulsion and fuel system changes across airplane systems, developing robust design solutions to support product improvements Plan, oversee, review, and approve engineering products and deliverables for the team, ensuring safety, quality, and timeliness Maintain Boeing design oversight for supplier‑provided fuel system components; review and approve supplier drawings, engineering change proposals, and configuration updates Engage suppliers to define, plan, and execute qualification testing and manage supplier‑initiated design modifications Manage Boeing Specification Control Document (SCD) requirements, including revisions and new SCD development Provide on‑site factory and delivery support in North Charleston: troubleshoot fuel system issues on the production line, support production holds, perform pre‑delivery inspections, and assist with delivery acceptance Investigate and resolve fleet, production, and supplier issues (Service Requests, Notices of Escape, Non‑Conformances, Engineering Liaison Requests, Change Notices, etc.) to maintain production flow and delivery schedules Coordinate, develop, and publish test plans, procedures, and reports; analyze test, certification, and production data to support timely dispositions Analyze system performance data to support safety, compliance, and airworthiness investigations; create and update system safety analyses and airworthiness limitations for the 787 Coordinate across internal partners (Electromagnetic Effects (EME), Reliability Maintainability and Testability (RM&T), Airplane Safety Engineering (ASE), Structures/Stress, Flight Test, Service Engineering, Production, Ground Ops, Regulatory Administration, etc.) to meet project goals and aircraft delivery milestones Communicate project status, risks, issues, and opportunities to Propulsion and Program leadership; represent Boeing professionally with suppliers, delivery teams, and external partners Work with general supervision, self‑directing activities based on customer, product, and stakeholder needs Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of experience working in an engineering discipline Willing and able to travel 10-20% of the time, both domestically and internationally. Preferred Qualifications (Desired Skills/Experience): Level 4: 9+ years of experience working in an engineering discipline application. 3+ years of experience in Propulsion Engineering Ability to lead a team, including training and mentoring more junior engineers who will contribute to the team’s success. Demonstrated ability to understand and resolve complex engine installation and integration problems across structural, systems, and certification domains. Experience leading system integration, supplier oversight, and technical decision‑making in aerospace or related industries. Proven ability to plan and execute qualification testing, produce technical documentation (interface drawings, installation reports, test procedures), and manage configuration and requirements. Knowledge of airplane safety, certification, and applicable regulations. Knowledge of Aircraft Fuel System equipment design, development, & certification, and Understanding of the principles of fluid mechanics. Experience working Continued Operational Safety Program (COSP) process. Familiar with ENOVIA, CSDT, REDARS, ETAC, IVX, IVT, CATIA (PDM, MatLab, Velocity a plus) Familiar with establishing RCCAs/BPSMs/fault trees/cause maps Able to work effectively with the entire value stream to accomplish desired results Understanding of large transport category aircraft certification process is preferred Experience with 14-CFR-Part 25 certification Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level (Level 3): $112,200 - $151,800 Senior (Level 4): $136,850 - $185,150 Applications for this position will be accepted until Nov. 20, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for Associate (Level 2) Structural Analysis Engineers for our Wing & Empennage Life Cycle Product Team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: • Perform stress analysis on Boeing 787 Aircraft Wing & Empennage structure using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods., • Reviews supplier documents in support of partner technical oversight including engineering drawings, analysis, test plans, procedures, and reports., • Develops, integrates and documents structural requirements to establish the Wing & Empennage designs., • Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads., • Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance., • Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications., • Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied., • Supports in-service products by investigating failures and analyzing improvements., • Supports the development of certification related documentation for CFR Part 25 Type Cert projects., • Collaborates on projects with domestic and international partners/suppliers., • Actively supports the growth and development of a new engineering organization., • Works under general direction. Basic Qualifications (Required Skills/ Experience): • Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences), • At least 2 years of experience working in relevant fields of the engineering industry, • At least 1 year of experience performing structural analysis, • Experience performing structural analysis using classical hand calculation methods Preferred Qualifications (Desired Skills/Experience): • Experience with basic coding/script writing with FEA tools, • Experience working projects with composite structures, • Prior experience with manufacturing/production, • Prior structural analysis experience on wing or empennage structures such as wing tips, wing box, wing center section, leading/trailing edges, horizontal stabilizer or vertical stabilizers. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range for Associate (Level 2): $85,000 – $115,000 Applications for this position will be accepted until Nov. 23, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structural Analysis Engineer for our Interiors Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Performs lead level “advise/assist/check” stress analysis responsibilities on Boeing 787 Aircraft Interiors products. Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports. Leads development, integration and documentation of structural requirements to establish the Interior Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with domestic or international partners/suppliers. Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators Works under minimal direction Basic Qualifications (Required Skills/ Experience) Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 9+ years of related work experience or an equivalent combination of education and experience 5+ years of experience performing stress analysis on interiors or related structures 3+ years of experience working with Buyer-Furnished and Supplier-Furnished Equipment Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience) 7+ years of experience working on aircraft interiors such as Galleys, Lavatories, In-Flight Entertainment, Seats, In-Seat Power Systems, Crew Rest, Cabin Lighting, Interior Panels, Stow Bins, Cargo Systems, etc. Experience leading the development and completion of certification related documentation Experience leading and/or providing oversight of structural test programs on interiors products Experience leading supplier technical oversight and collaborating with suppliers to solve technical challenges Current or prior DER/AR/E-UM Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Pay Range Summary: 126,650 – $171,350 Applications for this position will be accepted until Nov. 27, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is seeking a Mid-Level or Senior Structural Analysis Engineer (Level 3 or 4) to join our Fuselage Life Cycle Product Team in North Charleston, South Carolina. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center. Position Responsibilities: • Operates as a structural analyst or lead on Boeing 787 Fuselage primary structure including responsibilities of advising, reviewing, and signing technical documents that substantiate structural capability, • Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods, • Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports, • Leads development, integration and documentation of structural requirements to establish the Fuselage primary structure designs, • Coordinates with other engineering groups to establish the product's environment such as load cases, boundary conditions, interface architecture, and interface loads, • Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance, • Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify the primary structures meet requirements and specifications, • Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied, • Supports in-service products by leading investigations into failures and analyzing improvements, • Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort, • Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members, • Develops certification related documentation to support CFR Part 25 Type Cert project, • Collaborates and performs oversight on projects with domestic or international partners/suppliers, • Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators, • Works under minimal direction, • Possesses and encourages others to have a mindset of Safety and First Pass Quality, • Influences others to exhibit Boeing Values and Behaviors Basic Qualifications (Required Skills/ Experience): • Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences), • 5+ years of experience performing stress analysis on fuselage or related structures, • 3+ years of experience performing stress analysis on composite structures, • Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): • 9 or more years of related work experience or an equivalent combination of education and experience, • 7+ years of experience working on Fuselage primary structure, • 3+ years of experience leading supplier technical oversight and collaborating with suppliers to solve technical challenges, • 3+ years of hands on experience with fabrication of metallic and composite structures, • Experience leading the development and completion of certification related documentation, • Current or prior DER/AR/E-UM Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Shift: This position is for 1st shift. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level Summary pay range: $103,700 - $140,300 Senior Summary pay range: $126,650 - $171,350 Applications for this position will be accepted until Nov. 27, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) Structural Analysis Engineer for our Interiors Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Perform stress analysis on Boeing 787 Aircraft Interiors products using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews supplier documents in support of supplier technical oversight including engineering drawings, analysis, test plans, procedures, and reports. Develops, integrates and documents structural requirements to establish the Interior Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with domestic and international partners/suppliers. Actively supports the growth and development of a new engineering organization. Works under general direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 5+ years of related work experience or an equivalent combination of education and experience 3+ years of experience performing stress analysis on Interiors or related structures 1+ years of experience working with Buyer-Furnished and Supplier-Furnished Equipment Prior experience with manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 5+ years of experience working on aircraft interiors such as Galleys, Lavatories, In-Flight Entertainment, Seats, In-Seat Power Systems, Crew Rest, Cabin Lighting, Interior Panels, Stow Bins, Cargo Systems, etc Experience developing certification related documentation Experience developing test plans/procedures or leading test execution Experience providing supplier technical oversight Part 21 and Part 25 Code of Federal Regulations knowledge and experience interacting with Federal Regulators Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This role is for 1st shift, however, there may be additional shift requirements to support program objectives Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced (Level 3): $103,700 – $140,300 Applications for this position will be accepted until Nov. 27, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structural Analysis Engineer for our Systems Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Performs lead level “advise/assist/check” stress analysis responsibilities on Boeing 787 Aircraft Systems Commodities. Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports. Leads development, integration and documentation of structural requirements to establish the Airplane Systems Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with domestic or international partners/suppliers. Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators Works under minimal direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 9+ years of related work experience or an equivalent combination of education and experience 5+ years of experience performing stress analysis on airplane systems or related structures 3+ years of experience performing classical hand analysis methods using industry proven methods Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 7+ years of experience working on airplane systems structures Avionics, Electrical Equipment & Installation, Environment Control Systems, Flight Controls, Flight Deck, Fuel Systems, and Mechanical/Hydraulic Systems Experience leading the development and completion of certification related documentation Experience leading and/or providing oversight of structural test programs on airplane systems commodities Experience leading supplier technical oversight and collaborating with suppliers to solve technical challenges Current or prior DER/AR/E-UM Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: (Senior-Level 4) 126,650-171,350 Applications for this position will be accepted until Nov. 27, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is hiring for Mid-Level Propulsion System Integration Engineers to join our Propulsion 787 Program Engineering team in North Charleston, SC. We are building a new engineering team focused on main engine integration, APU, and fuels systems, directly supporting 787 production and deliveries. These roles are focused on system integration of the engine, APU, fuel system, performing installation analysis and certification deliverables, and providing hands on factory/delivery support. You’ll work across disciplines and with suppliers to keep 787 deliveries on schedule, resolve complex integration problems, meet customer commitments, and advance the safety, quality, and continued airworthiness of our products. You’ll work in a collaborative, multidisciplinary, agile environment using modern tools and practices, with strong opportunities for technical development and potential for leadership growth. If this vision and mission responsibility resonates with you, apply and join our Boeing South Carolina team of Propulsion System Integration Engineers today! Primary Responsibilities: Perform detailed propulsion system, engine, APU, and fuel system integration and installation analyses to ensure safe, maintainable, and certifiable installations across airframe and propulsion interfaces (pylon, mount, nacelle, ducts, fuel/oil/hydraulic system, electrical, and control & indication systems) Produce, review, and maintain engineering deliverables that preserve the certification basis and continued airworthiness of our aircraft Support qualification and demonstration testing (structural, thermal, vibration, endurance, fuel-system functional and leak testing); analyze test data and develop timely technical dispositions Troubleshoot production-line and delivery issues on-site in Charleston: support production holds, pre-delivery inspections, and delivery acceptance Investigate and resolve fleet/production/supplier issues (Service Requests, Non‑Conformances, Change Notices, etc.) to maintain flow and schedules Maintain and update configuration and requirements artifacts (specs, installation requirements, control documents) Support safety and airworthiness activities: update system safety analyses, installation limitations, and airworthiness requirements related to propulsion and fuel systems as needed Operate under lead level supervision, work in a team/collaborative environment, and independently drive technical workflows to completion Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement 5+ years of relevant work experience Preferred Qualifications (Desired Skills/Experience): 3+ years of experience in propulsion engineering or engine/APU and fuel system integration Demonstrated ability to analyze complex cross-domain problems (structures, systems, certification) and produce implementable solutions Experience with configuration management and requirements artifacts (ENOVIA, CSDT, REDARS, ETAC, IVX/IVT, CATIA or similar tools) Experience with supplier oversight, supplier drawing reviews, and managing supplier-initiated design modifications Experience planning and executing qualification testing and developing test procedures/reports Knowledge of RCCA/BPSM, fault trees, cause-mapping, and safety analyses Excellent written and verbal communication; able to convey complex technical issues to multiple audiences Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $112,200 - $151,800 Applications for this position will be accepted until Nov. 20, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) Structural Analysis Engineer for our Systems Stress team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Perform stress analysis on Boeing 787 Aircraft Systems Commodities using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews supplier documents in support of supplier technical oversight including engineering drawings, analysis, test plans, procedures, and reports. Develops, integrates and documents structural requirements to establish the Airplane Systems Commodity designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with international partners/suppliers. Actively supports the growth and development of a new engineering organization. Works under general direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 5+ years of related work experience or an equivalent combination of education and experience 3+ years of experience performing stress analysis on airplane systems or related structures 1+ years of experience performing classical hand analysis methods using industry proven methods Prior experience with manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 5+ years of experience working on airplane systems structures such as Avionics, Electrical Equipment & Installation, Environment Control Systems, Flight Controls, Flight Deck, Fuel Systems, and Mechanical/Hydraulic Systems Experience developing certification related documentation Experience developing test plans/procedures or leading test execution Experience supporting technical oversight of component test programs Part 21 and Part 25 Code of Federal Regulations knowledge and experience interacting with Federal Regulators Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This role is for 1st shift, however, there may be additional shift requirements to support program objectives Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for Experienced (Level 3): $103,700 – $140,300 Applications for this position will be accepted until Nov. 30, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) has an exciting opportunity for a Technical Integration Engineer (Consultant), Level 5, to join the Configuration Management Health Assessment (CMHA) team located in North Charleston, SC. The 787 Airplane Level Integration Team (ALIT) is looking for for an experienced technical leader to grow the Configuration Management Health Assessment (CMHA) team in a highly visible role on the 787 Program. You will work closely with program leadership, Boeing partners, suppliers and FAA representatives to assess configuration management practices, identify gaps, and drive actionable improvements. This position is ideal for a lead engineer who thrives in cross-functional environments, communicates effectively with senior stakeholders, and brings strong project management discipline to complex engineering challenges. This position will require both domestic and international travel to 787 Partner locations. The Statement of Work (SOW) for this position may include: Leading configuration management oversight and support for the 787 Program. Planning and executing on-site technical assessments at Boeing design partners and suppliers. Preparing clear, actionable assessment results and follow-up tasking to strengthen technical information management. Coordinating resolution of configuration management issues across both technical and functional teams. Position Responsibilities: Lead CMHA assessments and guide the working team through planning, execution, and follow-up activities. Communicate assessment results clearly and professionally to senior program leadership and FAA stakeholders. Serve as a trusted technical leader across Supplier Quality, Supply Chain Engineering, Procurement, Contracts, and Digital Engineering. Define, document, and interpret product requirements related to certification, configuration, data management, and engineering processes. Develop and implement plans and processes that ensure compliance with technical, data, regulatory, and company requirements. Track, analyze, and report data to monitor adherence to configuration, regulatory, and contractual requirements. Support audits, reviews, and corrective actions to ensure robust configuration control. Travel domestically and internationally as needed, up to 25%. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement. 14 or more years’ related work experience or an equivalent combination of education and experience. Preferred Qualifications (Desired Skills/Experience): Master’s degree or advanced coursework in relevant engineering or systems engineering fields. 5 or more years' leading engineering teams. Strong project management skills. Engineering experience in configuration management, design, analysis, manufacturing engineering or a related role, with exposures to certification, data management and engineering processes. Background supporting commercial airplane production; 787 experience strongly preferred. Strong knowledge or prior experience with AS-9100, BAC Specs, and Boeing product data management systems. Experience with Boeing QMS and proficiency with Boeing tools such as ENOVIA, Velocity, PSDS, DCCS, etc. Previous experience working directly with Boeing partners and suppliers. Excellent oral and written communication skills – including the ability to present technical information to diverse audiences. Proven leadership experience in both collaborative and high-pressure environments. Ability to work effectively with people diverse backgrounds and cultures. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process to all job descriptions moving forward. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: $154,700 - $209,300 Applications for this position will be accepted until Oct. 31, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) is hiring for Airplane Electronic Engineer (SME) to join the 787 Electronic Systems (Avionics, Integrated Modular Avionics, Network Systems, & Electrical Subsystems) team located in North Charleston, South Carolina. As a member of the Electronic Systems team at BSC, you will develop and support these systems and their components in a sustaining production environment. Project examples include addressing design obsolescence, developing product improvements, supporting production build and test, supporting new customer introduction, and supporting the in-service fleet. Position Responsibilities: • Leads work with customers to develop and document complex electronic and electrical system requirements., • Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications., • Leads work to test and validate to ensure system designs meet operational and functional requirements., • Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle., • Researches technology advances for potential application to company business needs., • Makes recommendations for technology investments. Basic Qualifications (Required Skills/Experience): • Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement, • 14 or more years' related work experience or an equivalent combination of education and experience Preferred Qualifications (Desired Skills/Experience): • Experience with DO-254 Airborne Electronic Hardware Development & Qualification, • Experience with DO-297 Integrated Modular Avionics Development & Qualification, • Experience with ARP-4754 Systems Development & Qualification, • Experience with DO-178 Airborne Software Development & Qualification, • Engineering Requirement definition / verification, • Commercial Aerospace certification experience, • Experience w/ ARINC 429 & 664, • Successful track record of mentorship and formal/informal leadership Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range SME (Level 5): $164,900 - $223,100 Applications for this position will be accepted until Nov. 21, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structural Analysis Engineer for our Wing & Empennage Life Cycle Product Team to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. Primary Responsibilities: Performs lead level “advise/assist/check” stress analysis responsibilities on Boeing 787 Wing and/or Empennage primary structures. Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports. Leads development, integration and documentation of structural requirements to establish the Wing and/or Empennage primary structure designs. Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify the primary structures meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members. Develops certification related documentation to support CFR Part 25 Type Cert projects. Collaborates and performs oversight on projects with domestic or international partners/suppliers. Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators Works under minimal direction. Basic Qualifications (Required Skills/ Experience): Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) 9+ years of related work experience or an equivalent combination of education and experience 5+ years of experience performing stress analysis on wing, empennage, or related structures 3+ years of experience performing stress analysis on composite structures Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems Preferred Qualifications (Desired Skills/Experience): 7+ years of experience working on wing or empennage primary structure such as Wing tips, wing leading or trailing edges, wing center section, wing box, wing join, vertical, or horizontal stabilizers Experience leading the development and completion of certification related documentation Experience leading supplier technical oversight and collaborating with suppliers to solve technical challenges Hands on experience with fabrication of metallic and composite structures Current or prior DER/AR/E-UM Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay Range Summary: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. (Senior-Level 4) Pay Range: 126,650-171,350 Applications for this position will be accepted until Nov. 30, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. 787 Airframe in Boeing Commercial Airplanes is hiring for a Mid-Level (Level 3) or Senior (Level 4) Structures Technical Designer for our Wing Box & Wing Tip, Wing Center Section & Side of Body, or Wing Edges & Empennage teams to work at our North Charleston, SC location. At Boeing, our engineers share a passion to redefine what’s possible. To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structures Technical Designer. Primary Responsibilities: Develops and maintains engineering product definition. Prepares design layouts and modifies existing designs. Develops engineering product definition. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process, or engineering related issues. Verifies accuracy of engineering data produced by others. Basic Qualifications (Required Skills/ Experience): Associates of Science in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) with 5+ years of experience in the engineering industry OR High School Diploma with 7+ years of experience in the engineering industry 5+ years of experience developing and maintaining engineering product definition 3+ years of experience using CAD Tools Experience performing investigations and data collection in support of root cause corrective action (RCCA) activities Experience with technical writing Preferred Qualifications (Desired Skills/Experience): 9+ years of experience in the engineering industry with an Associates in Science as described in the Basic Qualifications OR 11+ years of experience in the engineering industry with a High School Diploma Lead experience in developing and maintaining engineering product definition. Lead experience with design layout development. Lead experience performing engineering product definition reviews. Expertise using CATIA and Model Based Definition (MBD) for primary structure design. Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Mid-Level: 68,850-93,150 Experienced: 81,600-110,400 Applications for this position will be accepted until Nov. 27, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company is seeking a Mid-Level or Senior Airworthiness & Regulatory Engineer (Level 3 or Level 4) to join the Regulatory Administration and Airworthiness organization in North Charleston, South Carolina. This team has opportunities for those looking toward next steps in their career development in the field of aviation regulations and safety. If you are a growth-minded person with excitement for certification systems, realizing efficiencies, and thrives in an environment of latitude, we encourage you to apply. The team and leadership encourage innovation and forward-thinking solutions in an autonomous atmosphere. The team enjoys problem solving through investigating issues, developing action plans, data analysis and driving systems level solutions. This is a dynamic and highly visible environment. The successful candidate is a high-performing individual contributor who is seeking to develop Lead experience or a current Team Lead seeking to expand their breadth by working with global regulators in Commercial Aviation. Our teams are currently hiring for a broad range of experience levels for Airworthiness & Regulatory Engineers. Position Responsibilities: • Provides technical guidance and training relative to complex safety and airworthiness matters, • Navigates through various regulatory processes to identify effective solutions for complex problems, while providing guidance to all airplane programs, • Coordinates with engineering teams, project administrators, and regulators (may include international regulators/validation authorities) to successfully certify projects for commercial aircraft production teams, • Reviews certification plans, write letters to regulators, and understand compliance process, • Leads and facilitate discussions with the FAA, foreign regulatory agencies, and airplane program leaders, • Leads cross-functional teams resulting in resolution of technical issues, • Coordinates technical messaging and partnering with the FAA on regulatory issues, • Owns, manages, and has developed technical aptitude to enable execution of process/procedure documents (BPM, BPIs, D6s, D950s, etc.), • Ensures proper coordination across products, platforms and functional areas to promote culture of compliance to requirements and application of procedures and FAA guidance, • Develops strategic action plans for changes to certification processes and execute those plans through completion, • Contributes to root cause corrective action plans for development and execution of noncompliance’s, voluntary disclosures, informal corrective actions, formal corrective actions, etc. including reviewing/researching processes, design practices, analysis, conducting root cause analysis, and identifying/owning corrective actions and corrective action plans Basic Qualifications (Required Skills/Experience): • Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Data Science, Mathematics, Physics or Chemistry, • 5+ years of experience working directly with the FAA and/or ODA on Type Certification projects, • 5+ years of experience in developing, contributing and/or maintaining processes, policies, and procedures Preferred Qualifications (Desired Skills/Experience): • 9+ years of engineering related work experience or an equivalent combination of education and experience, • Engineering unit member or another FAA delegated member, • Experience working across the certification value stream, • Experience communicating verbally and in writing, to a variety of audiences including FAA representation, ODA Leadership, Engineering Unit Members (E-UM) & Project Administrators (PA), and Program & Functional Leaders, • Experience coaching/teaching E-UMs, Design Approval Engineers, Technical Specialists, Cert Plan Owners/Authors on certification processes and tool usage, • Experience identifying web application impact due to changes in certification requirements, • Systems thinker capable of making engineering proposals based on data analysis and forecasting wide reaching and longer-term impacts, • Experience developing presentations and presenting to multiple levels of an organization, • Experience investigating and finding solutions to complex technical or regulatory issues, • Experience recognizing and balance conflicting priorities Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range Mid-Level (Level )3: $107,100 - $144,900 Summary Pay Range Senior (Level 4): $131,750 - $178,250 Applications for this position will be accepted until Nov. 20, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes (BCA) has an exciting opportunity for a Product Data Management Engineer (Mid-Level or Senior) to join our team located in North Charleston, SC. The 787 Engineering organization is seeking a Technical Integrator to join the Airplane Level Integration Team (ALIT) within the Engineering Operations group. The position requires a candidate with a leadership mindset who communicates and collaborates well with others. They need to foster an environment that values inclusion. This role will have an emphasis on mentoring/coaching teammates, establishing positive working relationships, and instilling a culture of engineering excellence and safety, and technical leadership. In this role, you will lead the management and integration of engineering architecture—processes, systems, and data—and their interrelationships across the airplane product lifecycle. You will also provide technical leadership for configuration and data management, conduct and lead technical design reviews and audits, analyze complex trades/changes, and implement engineering standard processes, systems, and tools, root cause corrective action, and implementation of LEAN principles. Our Ideal candidate has a design or manufacturing engineering background with demonstrated experience on the 787 or a comparable commercial airplane program. Primary Responsibilities Lead management and integration of engineering architecture (processes, systems, data) across the product lifecycle to ensure consistency, traceability, and role-appropriate data access. Develop, analyze, manage and verify compliance of process and product baselines for highly integrated complex airplane products. Define, plan, coordinate and conduct product- and subsystem-level technical design reviews and audits for new and derivative products. Lead evaluation of complex product trades and changes; develop change proposals with impacts, risks, mitigation, and implementation plans. Lead definition and rollout of Configuration Management (CM) and Data Management (DM) standards, processes, systems and tools; drive adoption across IPTs and supporting functions. Define and allocate CM/DM requirements for hardware, software and engineering design data systems spanning multiple engineering functions. Assure integration of product elements; analyze and resolve complex issues with product structures and cross-discipline interfaces. Develop, integrate and implement engineering technical program plans including schedule impacts, risk assessments, and lessons learned incorporation. Provide mentorship and technical guidance to engineering teams on CM/DM best practices, tools, and lifecycle processes. Work with minimal direction and act as a primary technical integrator for assigned airplane-level integrations and change activities. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement . 5 or more years' related work experience or an equivalent combination of technical education and experience Demonstrated expertise in Configuration Management and Data Management for complex, highly integrated products. Experience developing and conducting technical design reviews, audits, and compliance verification across multi-discipline systems. Preferred Qualifications (Desired Skills/Experience): Level 4: 9 or more years' related work experience or an equivalent combination of technical education and experience Master’s degree or advanced coursework in relevant engineering or systems engineering fields. Hands-on design or manufacturing engineering experience on commercial airplane programs; direct experience on the 787 program strongly preferred. Proven ability to analyze complex trades/changes and produce actionable change proposals with risk and impact assessments. Familiarity with product lifecycle processes and tools (PLM, PDM, engineering data systems) and how they integrate with CM processes. Prior role as a technical integrator, configuration manager, or systems engineer on commercial transport aircraft (787 preferred). Experience with specific PLM/PDM or CM tools such as Enovia, Teamcenter, Windchill, IBM Engineering Lifecycle Management (DOORS), or similar. Knowledge of aerospace change processes, enterprise gated development, readiness levels, and regulatory compliance requirements. Preferred experience with Non Recurring Product Definition (NRPD) Familiarity with software configuration and model-based systems engineering (MBSE) concepts and tools. Experience integrating CM/DM practices together with Agile practices and tools (e.g., Jira, Confluence) across engineering organizations. Certification in configuration management, systems engineering, or relevant disciplines (e.g., CISCM, INCOSE, PMI-ACP). Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range Level 3:103,700-140, 300 Level 4:126,650-171,350 Applications for this position will be accepted until Nov. 16, 2026 Export Control Requirements: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Summary The Magnetic Resonance Imaging Technologist (MRI) reports to the site supervisor and the radiology manager. Under general supervision, the MRI Technologist performs high-quality MRI examinations in accordance with established protocols on patient populations for physician interpretation. Other duties as deemed necessary. Requirements (Education, Work Experience, Licensure, Registry &/or Certifications): Graduated from an accredited school of imaging. Registry eligible by the American Registry of Radiologic Technologists (ARRT) or the American Registry of Magnetic Resonance Imaging Technologists (ARMRIT) in MRI. Must obtain registry within 1 year of hire. Must be able to produce very high-quality special imaging with little supervision. Must be able to function effectively in a team-oriented environment. Must be familiar with age-specific criteria. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Proactively maintains and renews ARRT, state license, BLS, PPD, respirator fit test, and POC training. Graduated from an accredited imaging program. Registry eligible ARRT(MR) Must obtain MRI registration within 1 year of hire date. BLS Experience: 1-2 years Skills: General MRI exams, implants, elastography, and defecography. Rotate to other locations as needed for training/staffing. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC002017 UMA AMB RADI East Cooper Clinic-Radiology CC Pay Rate Type Hourly Pay Grade Health-28 Scheduled Weekly Hours 21 Work Shift Job Description Maintains image quality, productivity, and efficient patient workflow. Adheres to departmental standards and modality-specific protocols. Provides safe, compassionate, patient-centered care throughout the imaging process. Utilizes the SHIELD reporting platform when there is an event that occurs outside a normal encounter. Adheres to all MRI safety requirements, including zone protocols, implant screening, and ferromagnetic safety practices. Upholds compliance and organizational standards. Performs routine equipment quality control checks, assisting with troubleshooting equipment malfunctions and placing tickets as needed. Supports onboarding and training of staff and students. Facilitates a positive work and learning environment. Participates in performance improvement initiatives related to quality, efficiency, patient, employee, and physician satisfaction, and safety. Participates in staff meetings, lunch and learns, and quality meetings. Maintains a professional demeanor in attitude, appearance, and communication. Additional Job Description Education: Graduation from an accredited school of radiologic technology. Work Experience: 0-2 years of modality specific experience required. Registration/Certifications: Must be registered with the American Registry of Radiologic Technologists (ARRT). ARRT MRI registration required within one year. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary Position Purpose: The Magnetic Resonance Imaging Technologist (MRI) reports to the site supervisor and the radiology manager. Under general supervision, the MRI Technologist performs high-quality MRI examinations in accordance with established protocols on patient populations for physician interpretation. Other duties as deemed necessary. Requirements (Education, Work Experience, Licensure, Registry &/or Certifications) Graduated from an accredited school of imaging. Registry eligible by the American Registry of Radiologic Technologists (ARRT) or the American Registry of Magnetic Resonance Imaging Technologists (ARMRIT) in MRI. Must obtain registry within 1 year of hire. Must be able to produce very high-quality special imaging with little supervision. Must be able to function effectively in a team-oriented environment. Must be familiar with age-specific criteria. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Proactively maintains and renews ARRT, state license, BLS, PPD, respirator fit test, and POC training. Graduated from an accredited imaging program. Registry eligible ARRT(MR) Must obtain MRI registration within 1 year of hire date. BLS Experience: 1-2 years Skills: General MRI exams, implants, elastography, and defecography. Rotate to other locations as needed for training/staffing. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC002017 UMA AMB RADI East Cooper Clinic-Radiology CC Pay Rate Type Hourly Pay Grade Health-28 Scheduled Weekly Hours 40 Work Shift Job Description Maintains image quality, productivity, and efficient patient workflow. Adheres to departmental standards and modality-specific protocols. Provides safe, compassionate, patient-centered care throughout the imaging process. Utilizes the SHIELD reporting platform when there is an event that occurs outside a normal encounter. Adheres to all MRI safety requirements, including zone protocols, implant screening, and ferromagnetic safety practices. Upholds compliance and organizational standards. Performs routine equipment quality control checks, assisting with troubleshooting equipment malfunctions and placing tickets as needed. Supports onboarding and training of staff and students. Facilitates a positive work and learning environment. Participates in performance improvement initiatives related to quality, efficiency, patient, employee, and physician satisfaction, and safety. Participates in staff meetings, lunch and learns, and quality meetings. Maintains a professional demeanor in attitude, appearance, and communication. Additional Job Description Education: Graduation from an accredited school of radiologic technology. Work Experience: 0-2 years of modality specific experience required. Registration/Certifications: Must be registered with the American Registry of Radiologic Technologists (ARRT). ARRT MRI registration required within one year. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary $10,000 sign-on bonus + up to $5,000 relocation assistance available Full Time – Various Shifts Available Location – Chuck Dawley The Magnetic Resonance Imaging Technologist (MRI) reports to the site supervisor and the radiology manager. Under general supervision, the MRI Technologist performs high-quality MRI examinations in accordance with established protocols on patient populations for physician interpretation. Other duties as deemed necessary. Entity Medical University Hospital Authority (MUHA) Worker Type Employee Worker Sub-Type Regular Cost Center CC005827 CHS - MRI - Chuck Dawley (Offsite) Pay Rate Type Hourly Pay Grade Health-29 Scheduled Weekly Hours 40 Work Shift Job Description Compensation & Incentives Sign-on bonus: $10,000 Relocation assistance: Up to $5,000 for eligible candidates Additional pay: (call pay, overtime etc.) Shift Details: Full Time – Various Shifts Available Responsibilities Perform MRI examinations in accordance with established protocols while ensuring image quality, patient safety, and efficient workflow. Complete patient screening, exam documentation, and image verification in RIS and PACS to support timely physician interpretation. Maintain high standards of image quality, productivity, and patient throughput. Deliver safe, compassionate, patient-centered care throughout the imaging process. Adhere to all MRI safety protocols, including zone safety procedures, implant screening, and ferromagnetic safety practices. Utilize the SHIELD reporting platform to document and escalate events outside of normal clinical encounters. Follow all departmental policies, modality standards, and organizational compliance requirements. Perform routine equipment quality control checks and assist with troubleshooting and service ticket submission as needed. Support onboarding, training, and education of staff and students. Foster a positive, collaborative work and learning environment. Participate in performance improvement initiatives focused on quality, efficiency, safety, and patient, employee, and physician satisfaction. Attend staff meetings, in-services, lunch-and-learns, and quality improvement meetings. Maintain a professional demeanor in appearance, communication, and conduct. Additional Job Description Required Licensure, Certifications, Registrations: Education: Graduation from an accredited school of imaging. Experience/Skills: 1+ years, General MRI exams, implants, elastography, and defecography. Rotate to other locations as needed for training/staffing. Required Registration/Certification: Must be registered with the American Registry of Radiologic Technologists (ARRT) (R), required. Must be registered with the American Registry of Magnetic Resonance Imaging Technologist (ARMRIT), if not registered must be obtained within 1 year in this position. Licensure from the South Carolina Radiation Quality Standards Association is required. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider Why Join US Competitive compensation + incentives Flexible scheduling options Supportive team environment Opportunities for growth and specialization Modern equipment and technology Apply Today Take the next step in your career—apply today to join a team committed to excellence in patient care. (NOTE: The following descriptions are applicable to this section: 1) Continuous – 6-8 hours per shift; 2) Frequent – 2-6 hours per shift; 3) Infrequent – 0-2 hours per shift) Ability to perform job functions while standing. (Continuous) Ability to perform job functions while sitting. (Infrequent) Ability to perform job functions while walking. (Continuous) Ability to climb ladders/step stools. (Frequent to Infrequent) Ability to work indoors. (Continuous) Ability to work from elevated areas, specifically step stools. (Frequent to Infrequent) Ability to work in confined/cramped spaces. (Infrequent) Ability to perform job functions from kneeling positions. (Frequent) Ability to bend at the waist. (Frequent) Ability to twist at the waist. (Frequent) Ability to squat and perform job functions. (Frequent) Ability to perform ‘pinching’ operations. (Frequent) Ability to fully use both hands/arms. (Continuous) Ability to perform repetitive motions with hands/wrists/elbows and shoulders. (Continuous) Ability to fully use both legs. (Continuous) Ability to reach in all directions. (Continuous) Possess good finger dexterity. (Continuous) Ability to maintain tactile sensory functions. (Continuous) Ability to maintain good olfactory sensory function. (Continuous) Ability to lift and carry, up to 200 feet, 50lbs, unassisted. Ability to lift patients and move patients to 350lbs (+/-), assisted. Ability to lift objects from floor level to height of 72 inches, to 50lbs, unassisted. Ability to lower objects, to 50lbs (+/-), from height of 72 inches, unassisted. Ability to push/pull objects/patients to 350lbs (+/-), unassisted. Ability to maintain 20/40 vision, corrected. (Continuous) Ability to see and recognize objects close at hand. (Continuous) Ability to see and recognize objects at a distance. (Continuous) Ability to match or discriminate between colors. (Continuous) Ability to determine distance/relationship between objects; depth perception. (Continuous) Good peripheral vision capabilities. (Continuous) Ability to maintain hearing acuity, with correction. (Continuous) Ability to hear and understand whispered conversations at a distance of 3 feet. Ability to perform gross motor functions with frequent fine motor movements. (Continuous) Ability to be qualified physically (by medical personnel) for respirator use, initially and annua Additional New Requirements: Ability to deal effectively with stressful situations. Must possess excellent communication skills, both verbal and written. Computer literacy. Ability to work overtime as required. Ability to learn and use new processes, tools, and equipment as required. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary The Magnetic Resonance Imaging Technologist (MRI) reports to the site supervisor and the radiology manager. Under general supervision, the MRI Technologist performs high-quality MRI examinations in accordance with established protocols on patient populations for physician interpretation. Other duties as deemed necessary. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC002018 UMA AMB RADI NA Clinic-Prof Svcs-Radiology CC Pay Rate Type Hourly Pay Grade Health-28 Scheduled Weekly Hours 21 Work Shift Job Description Responsibilities • Perform MRI examinations in accordance with established protocols while ensuring image quality, patient safety, and efficient workflow., • Complete patient screening, exam documentation, and image verification in RIS and PACS to support timely physician interpretation., • Maintain high standards of image quality, productivity, and patient throughput., • Deliver safe, compassionate, patient-centered care throughout the imaging process., • Adhere to all MRI safety protocols, including zone safety procedures, implant screening, and ferromagnetic safety practices., • Utilize the SHIELD reporting platform to document and escalate events outside of normal clinical encounters., • Follow all departmental policies, modality standards, and organizational compliance requirements., • Perform routine equipment quality control checks and assist with troubleshooting and service ticket submission as needed., • Support onboarding, training, and education of staff and students., • Foster a positive, collaborative work and learning environment., • Participate in performance improvement initiatives focused on quality, efficiency, safety, and patient, employee, and physician satisfaction., • Attend staff meetings, in-services, lunch-and-learns, and quality improvement meetings., • Maintain a professional demeanor in appearance, communication, and conduct. Additional Job Description Required Licensure, Certifications, Registrations: Education: Graduation from an accredited school of imaging. Experience/Skills: 1+ years, General MRI exams, implants, elastography, and defecography. Rotate to other locations as needed for training/staffing. Required Registration/Certification: • Registry eligible by the American Registry of Radiologic Technologists (ARRT) or the American Registry of Magnetic Resonance Imaging Technologists (ARMRIT) in MRI., • Must be able to produce very high-quality special imaging with little supervision., • Must be able to function effectively in a team-oriented environment., • Must be familiar with age-specific criteria., • Must obtain registry within 1 year of hire. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Why Join US • Competitive compensation + incentives, • Flexible scheduling options, • Supportive team environment, • Opportunities for growth and specialization, • Modern equipment and technology Apply Today Take the next step in your career—apply today to join a team committed to excellence in patient care. (NOTE: The following descriptions are applicable to this section: 1) Continuous – 6-8 hours per shift; 2) Frequent – 2-6 hours per shift; 3) Infrequent – 0-2 hours per shift) Ability to perform job functions while standing. (Continuous) Ability to perform job functions while sitting. (Infrequent) Ability to perform job functions while walking. (Continuous) Ability to climb ladders/step stools. (Frequent to Infrequent) Ability to work indoors. (Continuous) Ability to work from elevated areas, specifically step stools. (Frequent to Infrequent) Ability to work in confined/cramped spaces. (Infrequent) Ability to perform job functions from kneeling positions. (Frequent) Ability to bend at the waist. (Frequent) Ability to twist at the waist. (Frequent) Ability to squat and perform job functions. (Frequent) Ability to perform ‘pinching’ operations. (Frequent) Ability to fully use both hands/arms. (Continuous) Ability to perform repetitive motions with hands/wrists/elbows and shoulders. (Continuous) Ability to fully use both legs. (Continuous) Ability to reach in all directions. (Continuous) Possess good finger dexterity. (Continuous) Ability to maintain tactile sensory functions. (Continuous) Ability to maintain good olfactory sensory function. (Continuous) Ability to lift and carry, up to 200 feet, 50lbs, unassisted. Ability to lift patients and move patients to 350lbs (+/-), assisted. Ability to lift objects from floor level to height of 72 inches, to 50lbs, unassisted. Ability to lower objects, to 50lbs (+/-), from height of 72 inches, unassisted. Ability to push/pull objects/patients to 350lbs (+/-), unassisted. Ability to maintain 20/40 vision, corrected. (Continuous) Ability to see and recognize objects close at hand. (Continuous) Ability to see and recognize objects at a distance. (Continuous) Ability to match or discriminate between colors. (Continuous) Ability to determine distance/relationship between objects; depth perception. (Continuous) Good peripheral vision capabilities. (Continuous) Ability to maintain hearing acuity, with correction. (Continuous) Ability to hear and understand whispered conversations at a distance of 3 feet. Ability to perform gross motor functions with frequent fine motor movements. (Continuous) Ability to be qualified physically (by medical personnel) for respirator use, initially and annua Additional New Requirements: Ability to deal effectively with stressful situations. Must possess excellent communication skills, both verbal and written. Computer literacy. Ability to work overtime as required. Ability to learn and use new processes, tools, and equipment as required. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary $10,000 sign-on bonus + up to $5,000 relocation assistance available Performs radiographic procedures at a technical level requiring sound understanding of anatomical positioning and physiology, a high degree of technical competency, and with the ability to act with initiative and ingenuity with a minimum of supervision. Apply ionizing radiation for radiologic diagnosis in adult and/or pediatric radiology. Other duties as deemed necessary. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC005545 UMA AMB RADI Clements Ferry - Radiology Pay Rate Type Hourly Pay Grade Health-26 Scheduled Weekly Hours 40 Work Shift Job Description Maintains image quality, productivity, and efficient patient workflow. Adheres to departmental standards and modality-specific protocols. Provides safe, compassionate, patient-centered care throughout the imaging process. Supports onboarding and training of staff and students. Facilitates a positive work and learning environment. Participates in performance improvement initiatives related to quality, efficiency, patient, employee, and physician satisfaction, and safety. Participates in staff meetings, lunch and learns, and quality meetings. Maintains a professional demeanor in attitude, appearance, and communication. Additional Job Description Education: Graduation from an accredited school of radiologic technology. Experience: Zero to two years of modality specific work experience. Registration/Certification: Must be registered with the American Registry of Radiologic Technologists (ARRT) within 6 months of hire. Licensure from the South Carolina Radiation Quality Standards Association is required. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary $10,000 sign on bonus for qualified candidates Job Description Summary: The Pediatric Interventional Cardiology Radiologic Technologist I for the Pediatric Catheterization Lab reports to the Cath Lab Supervisor and Interventional Cardiology and Imaging Manager. Under limited supervision, the Pediatric Interventional Cardiology Radiologic Technologist II performs and assists complex technical procedures, operates at a high-level of technical competency and models the ability to act with initiative and ingenuity under limited supervision. This role is responsible for the safe use of ionizing radiation for special cardiovascular, EP, and interventional procedures on a population ranging from the neonate to the geriatric patient. This position functions proficiently during all heart catheterization, electrophysiology studies, ablations and other cardiovascular interventional radiographic procedures. This role commands a strong knowledge of normal and abnormal cardiovascular anatomy and physiology. Entity Medical University Hospital Authority (MUHA) Worker Type Employee Worker Sub-Type Regular Cost Center CC000320 CHS - Cath Lab - 3 (SJCH) Pay Rate Type Hourly Pay Grade Health-28 Scheduled Weekly Hours 40 Work Shift Job Description Hours Per Week: 40 Scheduled Work Hours/Shift: Day Shift 7a-3:30p M-F (40 hours a week) plus on call Education: Graduation from an accredited school of radiologic technology. Experience: Zero to two years of modality specific work experience. Registration/Certification: Must be registered with the American Registry of Radiologic Technologists (ARRT) within 6 months of hire. Licensure from the South Carolina Radiation Quality Standards Association is required. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. Additional Job Description Education: Graduation from an accredited school of radiologic technology. Experience: At least two years of modality specific experience. Must have successfully complete the Imaging Specialist Clinical Ladder Program and be endorsed as a level III. Must complete the revalidation process annually with work area leadership to remain as a level III. Registration/Certification: Must be registered with the American Registry of Radiologic Technologists (ARRT). Licensure from the South Carolina Radiation Quality Standards Association is required. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. Skill set: Fully competent in advanced modality skill sets and flexible to rotate. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary $10,000 sign-on bonus + up to $5,000 relocation assistance available Part Time – Various Shifts Available Location – East Cooper The Magnetic Resonance Imaging Technologist (MRI) reports to the site supervisor and the radiology manager. Under general supervision, the MRI Technologist performs high-quality MRI examinations in accordance with established protocols on patient populations for physician interpretation. Other duties as deemed necessary. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC002017 UMA AMB RADI East Cooper Clinic-Radiology CC Pay Rate Type Hourly Pay Grade Health-28 Scheduled Weekly Hours 40 Work Shift Job Description Compensation & Incentives Sign-on bonus: $10,000 Relocation assistance: Up to $5,000 for eligible candidates Additional pay: (call pay, overtime etc.) Shift Details: Full Time – Various Shifts Available Responsibilities Perform MRI examinations in accordance with established protocols while ensuring image quality, patient safety, and efficient workflow. Complete patient screening, exam documentation, and image verification in RIS and PACS to support timely physician interpretation. Maintain high standards of image quality, productivity, and patient throughput. Deliver safe, compassionate, patient-centered care throughout the imaging process. Adhere to all MRI safety protocols, including zone safety procedures, implant screening, and ferromagnetic safety practices. Utilize the SHIELD reporting platform to document and escalate events outside of normal clinical encounters. Follow all departmental policies, modality standards, and organizational compliance requirements. Perform routine equipment quality control checks and assist with troubleshooting and service ticket submission as needed. Support onboarding, training, and education of staff and students. Foster a positive, collaborative work and learning environment. Participate in performance improvement initiatives focused on quality, efficiency, safety, and patient, employee, and physician satisfaction. Attend staff meetings, in-services, lunch-and-learns, and quality improvement meetings. Maintain a professional demeanor in appearance, communication, and conduct. Additional Job Description Required Licensure, Certifications, Registrations: Education: Graduation from an accredited school of radiologic technology. Experience/Skills: 1+ years, General MRI exams, implants, elastography, and defecography. Rotate to other locations as needed for training/staffing. Required Registration/Certification: Must be registered with the American Registry of Radiologic Technologists (ARRT) (R), required. Must be registered with the American Registry of Magnetic Resonance Imaging Technologist (ARMRIT), if not registered must be obtained within 1 year in this position. Licensure from the South Carolina Radiation Quality Standards Association is required. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider Why Join US Competitive compensation + incentives Flexible scheduling options Supportive team environment Opportunities for growth and specialization Modern equipment and technology Apply Today Take the next step in your career—apply today to join a team committed to excellence in patient care. (NOTE: The following descriptions are applicable to this section: 1) Continuous – 6-8 hours per shift; 2) Frequent – 2-6 hours per shift; 3) Infrequent – 0-2 hours per shift) Ability to perform job functions while standing. (Continuous) Ability to perform job functions while sitting. (Infrequent) Ability to perform job functions while walking. (Continuous) Ability to climb ladders/step stools. (Frequent to Infrequent) Ability to work indoors. (Continuous) Ability to work from elevated areas, specifically step stools. (Frequent to Infrequent) Ability to work in confined/cramped spaces. (Infrequent) Ability to perform job functions from kneeling positions. (Frequent) Ability to bend at the waist. (Frequent) Ability to twist at the waist. (Frequent) Ability to squat and perform job functions. (Frequent) Ability to perform ‘pinching’ operations. (Frequent) Ability to fully use both hands/arms. (Continuous) Ability to perform repetitive motions with hands/wrists/elbows and shoulders. (Continuous) Ability to fully use both legs. (Continuous) Ability to reach in all directions. (Continuous) Possess good finger dexterity. (Continuous) Ability to maintain tactile sensory functions. (Continuous) Ability to maintain good olfactory sensory function. (Continuous) Ability to lift and carry, up to 200 feet, 50lbs, unassisted. Ability to lift patients and move patients to 350lbs (+/-), assisted. Ability to lift objects from floor level to height of 72 inches, to 50lbs, unassisted. Ability to lower objects, to 50lbs (+/-), from height of 72 inches, unassisted. Ability to push/pull objects/patients to 350lbs (+/-), unassisted. Ability to maintain 20/40 vision, corrected. (Continuous) Ability to see and recognize objects close at hand. (Continuous) Ability to see and recognize objects at a distance. (Continuous) Ability to match or discriminate between colors. (Continuous) Ability to determine distance/relationship between objects; depth perception. (Continuous) Good peripheral vision capabilities. (Continuous) Ability to maintain hearing acuity, with correction. (Continuous) Ability to hear and understand whispered conversations at a distance of 3 feet. Ability to perform gross motor functions with frequent fine motor movements. (Continuous) Ability to be qualified physically (by medical personnel) for respirator use, initially and annua Additional New Requirements: Ability to deal effectively with stressful situations. Must possess excellent communication skills, both verbal and written. Computer literacy. Ability to work overtime as required. Ability to learn and use new processes, tools, and equipment as required. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary Performs radiographic procedures at a technical level requiring sound understanding of anatomical positioning and physiology, a high degree of technical competency and with the ability to act with initiative and ingenuity with a minimum of supervision. Apply ionizing radiation for radiologic diagnosis in adult and/or pediatric radiology. Other duties as deemed necessary. Requirements (Education, Work Experience, Licensure, Registry &/or Certifications) Graduate of an accredited school of Radiologic Technology Registered with the American Registry of Radiologic Technologists (ARRT) Licensed by the South Carolina Radiation Quality Standards Association (SCRQSA) Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Graduated from an accredited Radiologic Technology program. Must obtain Radiologic registration within 6 months of hire date. Licensed by SCRQSA BLS Experience:0-2years Skills: General and ortho exams. Pediatric to geriatric Rotate to other locations as needed for training / staffing. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC002018 UMA AMB RADI NA Clinic-Prof Svcs-Radiology CC Pay Rate Type Hourly Pay Grade Health-26 Scheduled Weekly Hours 40 Work Shift Job Description Job Responsibility: -Maintains image quality, productivity, and efficient patient workflow. Adheres to departmental standards and modality-specific protocols. -Provides safe, compassionate, patient-centered care throughout the imaging process. Supports onboarding and training of staff and students. Facilitates a positive work and learning environment. Participates in performance improvement initiatives related to quality, efficiency, patient, employee, and physician satisfaction, and safety. Participates in staff meetings, lunch and learns, and quality meetings. Maintains a professional demeanor in attitude, appearance, and communication. Additional Job Description Education: Graduation from an accredited school of radiologic technology. Experience: Zero to two years of modality specific work experience. Registration/Certification: Must be registered with the American Registry of Radiologic Technologists (ARRT) within 6 months of hire. Licensure from the South Carolina Radiation Quality Standards Association is required. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary Graduate from an accredited school of radiologic technology. Current registration in Radiology from the American Registry of Radiologic Technologists (ARRT) Registry eligible by ARRT in MRI and must obtain registry within 1 year of hire. Must be able to produce very high-quality special imaging with little supervision. Must be able to function effectively in a team-oriented environment. Must be familiar with age specific criteria. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Proactively maintains and renews ARRT, state license, BLS, PPD, respirator fit test, and POC training. Must obtain MRI registration within 1 year of hire date. Experience: 0-2 years Skills: General MRI exams, implants, elastography, defecography, and rotation to other locations as needed for training and staffing purposes. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC002017 UMA AMB RADI East Cooper Clinic-Radiology CC Pay Rate Type Hourly Pay Grade Health-28 Scheduled Weekly Hours 40 Work Shift Day (United States of America) Job Description Performs MRI examinations in accordance with established protocols. Selects appropriate imaging protocols and verifies patient identity using two identifiers. Completes and verifies patient history and screening forms prior to imaging. Accurately performs and documents exams in RIS and PACS, including creatinine levels, contrast usage, and supplies as applicable. Reviews images for quality and completeness prior to radiologist interpretation. Ensures timely transmission of images to PACS for physician review. Maintains image quality, productivity, and efficient patient workflow. Adheres to departmental standards and modality-specific protocols. Provides safe, compassionate, patient-centered care throughout the imaging process. Documents and communicates safety and performance events, including contrast reactions, extravasation, system downtime, and patient or provider concerns in the reporting system. Adheres to all MRI safety requirements, including zone protocols, implant screening, and ferromagnetic safety practices, as well as radiation safety standards for CT. Upholds compliance and organizational standards. Performs routine equipment quality control checks, assisting with troubleshooting equipment malfunctions and placing tickets as needed. Supports onboarding and training of staff and students. Facilitates a positive work and learning environment. Participates in performance improvement initiatives related to quality, efficiency, patient, employee, and physician satisfaction, and safety. Participates in staff meetings, lunch and learns, and quality meetings. Maintains a professional demeanor in attitude, appearance, and communication. Additional Job Description Education: Graduation from an accredited school of radiologic technology. Work Experience: 0-2 years of modality specific experience required. Registration/Certifications: Must be registered with the American Registry of Radiologic Technologists (ARRT). ARRT MRI registration required within one year. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Job Description Summary Position Purpose: The Magnetic Resonance Imaging Technologist (MRI) reports to the site supervisor and the radiology manager. Under general supervision, the MRI Technologist performs high-quality MRI examinations in accordance with established protocols on patient populations for physician interpretation. Other duties as deemed necessary. Requirements (Education, Work Experience, Licensure, Registry &/or Certifications) Graduated from an accredited school of imaging. Registry eligible by the American Registry of Radiologic Technologists (ARRT) or the American Registry of Magnetic Resonance Imaging Technologists (ARMRIT) in MRI. Must obtain registry within 1 year of hire. Must be able to produce very high-quality special imaging with little supervision. Must be able to function effectively in a team-oriented environment. Must be familiar with age-specific criteria. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Proactively maintains and renews ARRT, state license, BLS, PPD, respirator fit test, and POC training. Graduated from an accredited imaging program. Registry eligible ARRT(MR) Must obtain MRI registration within 1 year of hire date. BLS Experience: 1-2 years Skills: General MRI exams, implants, elastography, and defecography. Rotate to other locations as needed for training/staffing. Entity University Medical Associates (UMA) Only Employees and Financials Worker Type Employee Worker Sub-Type Regular Cost Center CC002017 UMA AMB RADI East Cooper Clinic-Radiology CC Pay Rate Type Hourly Pay Grade Health-28 Scheduled Weekly Hours 40 Work Shift Job Description Maintains image quality, productivity, and efficient patient workflow. Adheres to departmental standards and modality-specific protocols. Provides safe, compassionate, patient-centered care throughout the imaging process. Utilizes the SHIELD reporting platform when there is an event that occurs outside a normal encounter. Adheres to all MRI safety requirements, including zone protocols, implant screening, and ferromagnetic safety practices. Upholds compliance and organizational standards. Performs routine equipment quality control checks, assisting with troubleshooting equipment malfunctions and placing tickets as needed. Supports onboarding and training of staff and students. Facilitates a positive work and learning environment. Participates in performance improvement initiatives related to quality, efficiency, patient, employee, and physician satisfaction, and safety. Participates in staff meetings, lunch and learns, and quality meetings. Maintains a professional demeanor in attitude, appearance, and communication. Additional Job Description Education: Graduation from an accredited school of radiologic technology. Work Experience: 0-2 years of modality specific experience required. Registration/Certifications: Must be registered with the American Registry of Radiologic Technologists (ARRT). ARRT MRI registration required within one year. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider. Advanced Cardiac Life Support (ACLS) preferred. If you like working with energetic enthusiastic individuals, you will enjoy your career with us! The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need. Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: _

Logistics at full potential. At GXO, we’re constantly looking for talented individuals at all levels who can deliver the caliber of service our company requires. You know that a positive work environment creates happy employees, which boosts productivity and dedication. On our team, you’ll have the support to excel at work and the resources to build a career you can be proud of. Day Shift, Monday - Friday, 6:30am - 3:30pm As the Maintenance Technician, you will perform highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance processes. If you have the skills required for this role and a passion for keeping facilities and equipment in top-notch shape to ensure operations run safely and smoothly, consider joining GXO! Pay, benefits and more. We are eager to attract the best, so we offer competitive compensation and a generous benefits package, including full health insurance (medical, dental and vision), 401(k), life insurance, disability and more. What you’ll do on a typical day: • Maintain Chucks, 6 River mobile pick units, etc., • Repair and maintain a wide variety of equipment associated with the facility, • Maintain firm knowledge of plant layout and stay on top of current company policies as they relate to safety, environmental issues, etc., • Maintain facilities infrastructure and equipment in various areas, including skilled carpentry, electrical, painting, plastering, dry walling, plumbing, heating, air conditioning and mechanical work; coordinate and schedule third-party service providers as needed, • Perform advanced level plumbing work, including installing, repairing and replacing plumbing fixtures and clearing obstructions from water and sewer lines, • Assist in the implementation of new processes and equipment as they are brought into the company, • Process products that require testing and mechanical evaluation, • Complete all cosmetic repairs to restore products to sellable conditions, • Perform scheduled routine machine maintenance, including disassembling, cleaning and inspecting machine mechanical, pneumatic, hydraulic, low-voltage electrical and coolant systems, • Complete necessary preventive maintenance in a timely manner; document preventive maintenance, equipment repair, part usages, etc. What you need to succeed at GXO: At a minimum, you’ll need: • Knowledge of and experience reading simple electrical, mechanical and pneumatic drawings, • Microsoft Office experience, • Experience with Microsoft Office It’d be great if you also have: • Associate or bachelor’s degree, specialized vocational training or equivalent education and experience in product maintenance, • Active Journeyman license, • 2 years of facility maintenance experience; strong hydraulic, pneumatic, mechanical and industrial skills, • Experience with tools and equipment used in building maintenance, reconstruction and repair work, • Experience using drawings, manuals and diagrams to coordinate and complete installation of equipment and components according to specifications, • Excellent communication skills with managers, employees and vendors while delivering status reports and performing maintenance and repair work, machinery installations or moves This job requires the ability to: • Lift up to 50 lbs. above the waist and carry heavy objects, • Safely walk and stand for extended periods of time on various surfaces that may be uneven or slippery, • Reach (including above your head), bend, climb, push, pull, twist, squat and kneel, • Access any area of the equipment to perform necessary maintenance, including inspecting and performing work in, on or under parts of the equipment, • Safely and effectively operate lift trucks and manual lifting equipment in the process of installing, modifying or repairing industrial equipment We engineer faster, smarter, leaner supply chains. GXO is a leading provider of cutting-edge supply chain solutions to the most successful companies in the world. We help our customers manage their goods most efficiently using our technology and services. Our greatest strength is our global team – energetic, innovative people of all experience levels and talents who make GXO a great place to work. We are proud to be an Equal Opportunity employer including Disabled/Veterans. GXO adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with GXO policies which are in place to safeguard our employees and customers. All applicants who receive a conditional offer of employment may be required to take and pass a pre-employment drug test. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All employees may be required to perform duties outside of their normal responsibilities from time to time, as needed. Review GXO's candidate privacy statement _ #appcastrequest

Strong staffing Support when it matters most. Technology and tools that streamline patient monitoring and communication to help you work more efficiently. Robust supply chains to keep you fully equipped. Ongoing clinical education to improve your skills. As a Registered Nurse at HCA Healthcare Trident Hospital, you’ll have all the staffing support, technology and resources you need to deliver safe, high-quality care—so you can focus on what you do best. Job Summary and Qualifications The Registered Nurse coordinates and delivers high quality, patient-centered care in accordance with the nature and specific requirements of the department, and consistent with the scope and standards of practice for the relevant state and specialty. In collaboration with medical providers and other members of the care team, the RN provides individualized, comprehensive, and compassionate care using established nursing models such as “Assess, Perform, Teach, and Manage.” The RN serves as an advocate for patients/families/caregivers and models a commitment to the organization’s vision/mission/values to support an unparalleled patient experience and clinical outcomes that contribute to overall departmental performance. • Performs procedures, monitoring, or other functions as ordered by the medical provider(s). Documents the administration of care in the patient medical record in a timely and thorough manner., • Teaches patients/families/caregivers about patient medical condition, patient status, treatment plan, medications and possible side effects, and follow-up measures. Translates complex medical terminology to ensure complete understanding., • Teaches patients/families/caregivers about any non-medicinal follow-up measures, such as healthy diet and exercise, disease prevention, and/or other lifestyle changes. Prepares patients and families/caregivers for future self-management., • Manages evidence-based practices and continuous process improvement initiatives to meet and exceed quality measures and enhance the exceptional care provided to patients., • Manages the quality of care by collaborating with a multidisciplinary team to coordinate, evaluate, customize, and deliver a holistic patient treatment plan that promotes and supports recovery. What qualifications you will need: • Advanced Cardiac Life Spt must be obtained within 90 days of employment start date, • (RN) Registered Nurse must be obtained within 90 days of employment start date, • Registered Nurse Diploma must be obtained within 90 days of employment start date, • Basic Cardiac Life Support, or BCLS Instructor must be obtained within 90 days of employment start date, • No Travel Required, • No experience Required Years of Experience Benefits HCA Healthcare Trident Hospital, offers a total rewards package that supports the health, life, career and retirement of our colleagues. The available plans and programs include: • Comprehensive benefits for medical, prescription drug, dental, vision, behavioral health and telemedicine services, • Wellbeing support, including free counseling and referral services, • Time away from work programs for paid time off, paid family leave, long- and short-term disability coverage and leaves of absence, • Savings and retirement resources, including a 401(k) Plan with a 100% match on 3% to 9% of pay (based on years of service), Employee Stock Purchase Plan, flexible spending accounts, preferred banking partnerships, retirement readiness tools, rollover support and financial wellbeing counseling, • Education support through tuition assistance, student loan assistance, certification support, dependent scholarships and a partnership with Galen College of Nursing, • Additional benefits for fertility and family building, adoption assistance, life insurance, supplemental health protection plans, auto and home insurance, legal counseling, identity theft protection and consumer discounts _ Note: Eligibility for benefits may vary by location Trident Medical Center – Facility Overview Founded in 1975, Trident Medical Center has been serving patients and families throughout Berkeley, Charleston, and Dorchester Counties for 50 years. As a 320+ bed Level II Trauma Center, Trident provides comprehensive healthcare services, advanced specialty care, and 24/7 emergency treatment, earning recognition as the #1 Trauma Center in the Lowcountry. Key Highlights e • Award-winning Heart Center, • Home to the South Carolina Institute for Robotic Surgery, • Comprehensive breast health services through the Trident Breast Care Center, • Features the Joseph M. Still Burn Clinic, the region’s only outpatient burn clinic for patients of all ages, • Provides 24/7 Hospitalist and Intensivist coverage, • Healthgrades Five-Star recipient for cardiovascular care, neurosciences, critical care, and patient safety outcomes Expanded Emergency Access In addition to emergency departments at Trident Medical Center and Summerville Medical Center, the health system operates four freestanding emergency rooms (FSERs) offering 24/7 emergency care: • Brighton Park Emergency (Summerville), • Centre Pointe Emergency (North Charleston), • James Island Emergency (Charleston), • Moncks Corner Medical Center (Berkeley County), • Long Point Free Standing ED coming soon! Together, these facilities provide convenient, around-the-clock access to emergency services across the greater Charleston region. "Nurses are essential to the delivery of healthcare and serve as its foundation. At HCA Healthcare, we are committed to equipping nurses with the tools and resources they need to deliver exceptional patient care, championing the profession, and supporting the advancement of nursing’s future." Erica Rossitto, MBA/HCM, BSN, RN, NEA-BC Senior Vice President and Chief Nurse Executive HCA Healthcare If growth and continued learning is important to you, we encourage you to apply for our ICU RN opening. Our team will promptly review your application. Highly qualified candidates will be contacted for interviews. Unlock the possibilities apply today! We are an equal opportunity employer. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Position Summary: \n Sapient Logic is seeking a Systems Software Engineer to support a Government mission customer in Charleston, SC or Reston, VA. This full-time, on-site role requires strong systems programming and database engineering expertise. The engineer will analyze and modify database engine internals, network protocols, and core services to support secure mission applications and integrations. \n \n Responsibilities: \n ·Develop, maintain, test, and deploy secure, scalable applications and services using C, C++, Rust, Go, Java, Python, or Node.js. \n · Apply systems programming principles, particularly in C, C++, and Rust, to develop performant and reliable software components. \n · Develop software supporting process creation, monitoring, control, and inter-process communication. \n · Build concurrent and multithreaded applications using appropriate synchronization, signal handling, memory management, and resource-control techniques. \n · Design, implement, and troubleshoot networked applications using sockets, client-server architectures, and applicable network protocols. \n · Analyze database engine source code, communication protocols, request and response formats, serialization, and packet layouts to support development and integration. \n · Trace requests through database engine code to identify processing logic, integration points, and the effects of proposed modifications. \n · Develop relational data-storage solutions using Structured Query Language (SQL), including data modeling, query development, performance tuning, and access control. \n · Develop and integrate graph database solutions supporting relationship-based data modeling, analysis, and retrieval. \n · Work across relational databases, graph databases, object storage, and search/indexing engines, including technologies such as PostgreSQL, Redis, RxDB, Neo4j, Amazon S3, and Elasticsearch. \n · Refactor and modernize existing services, including transitioning functionality from Python to other implementation languages where appropriate. \n · Develop and maintain Infrastructure as Code (IaC) to provision, configure, and manage infrastructure through repeatable, version-controlled workflows. \n · Deploy, monitor, and troubleshoot cloud-hosted software, including dependencies on compute, storage, networking, identity, and security services. \n · Integrate applications with identity providers to support authentication, authorization, federation, single sign-on, and identity-aware access control. \n · Implement OpenID Connect (OIDC) integrations, including token validation, claims processing, client registration, redirect flows, session management, and secure API access. \n · Incorporate Zero Trust Architecture principles into software designs, including interactions among policy decision, administration, information, and enforcement components. \n · Collaborate with cybersecurity, infrastructure, data, and mission stakeholders to integrate security controls, cryptographic protections, logging, monitoring, and auditability throughout the software development lifecycle. \n · Produce and maintain software designs, interface specifications, deployment procedures, configuration baselines, security implementation details, and operational support materials. \n \n Required Qualifications: \n · Bachelor’s degree in a quantitative field such as engineering or mathematics is required. Relevant fields include Electrical Engineering, Computer Engineering, Computer Science, Information Technology, and Information Systems. \n · 10 years of professional software engineering experience (typical). \n · Prior experience supporting the Intelligence Community. \n · Experience applying programming concepts in a professional or academic setting. \n · Experience applying modern software development methodologies, such as Agile, DevOps, or DevSecOps, in a professional or academic setting. \n · Hands-on systems programming experience in one or more of C, C++, or Rust, with the ability to work across additional languages and runtimes as needed. \n · Experience with operating-system interfaces, process management, inter-process communication, concurrency, and multithreaded application development. \n · Understanding of synchronization primitives, signal handling, memory management, and resource management. \n · Experience developing or troubleshooting socket-based applications and client-server communications. \n · Experience with database engine internals, network protocol development, or comparable source-code and low-level systems analysis. \n · Ability to navigate unfamiliar source code, trace execution and data flows, and assess how changes affect performance, interoperability, concurrency, and security. \n · Experience with relational database design, SQL, query optimization, and database access controls. \n · Understanding of graph database concepts and their application to relationship-based data. \n · Experience developing infrastructure automation and deploying or supporting software in cloud environments. \n · Experience integrating applications with identity services using OIDC and applying authentication and authorization controls. \n · Understanding of Zero Trust Architecture concepts, including Policy Decision Points (PDPs), Policy Administration Points (PAPs), Policy Information Points (PIPs), and Policy Enforcement Points (PEPs). \n · Strong troubleshooting, technical documentation, and collaboration skills. \n · Agile Developer certification or Certified Scrum Developer certification. \n · CompTIA Security+ or higher-level cybersecurity certification. \n · Active DoD Top Secret/Sensitive Compartmented Information (TS/SCI) Clearance with the ability to obtain a Counterintelligence (CI) Polygraph is required. \n · U.S. Citizenship is required. \n Candidates who meet the qualifications above do not need experience with every technology listed under desired qualifications. Depth in systems programming and database engineering, paired with the ability to learn adjacent technologies, is what matters most. \n \n Desired Qualifications: \n · Advanced education: Master’s degree in a quantitative field such as engineering or mathematics. Relevant fields include Electrical Engineering, Computer Engineering, Computer Science, Information Technology, and Information Systems. \n · Database engineering: Experience with PostgreSQL and Neo4j, including database design, administration, performance optimization, and application integration. \n · Protocol engineering: Experience interpreting packet captures, working with binary message formats, developing protocol parsers, or modifying database clients, drivers, extensions, or engine code. \n · Infrastructure automation: Experience using Terraform and Ansible for cloud infrastructure provisioning, configuration management, and application deployment. \n · Cloud and platform engineering: Experience deploying and maintaining applications and infrastructure in Amazon Web Services (AWS), including AWS GovCloud, Kubernetes, Red Hat OpenShift, and environments subject to Department of Defense Impact Level 5 requirements. \n · Identity platforms: Experience with PingFederate, Keycloak, Radiant Logic, SailPoint, Secret Server, or Okta; experience migrating identity providers and adapting application code is especially useful. \n · Public Key Infrastructure (PKI): Experience implementing certificate lifecycle management, key management, certificate validation, and cryptographic service integrations. \n · Cryptographic interfaces: Experience using PKCS #11 to integrate applications with cryptographic tokens, Hardware Security Modules (HSMs), or other secure key-storage mechanisms. \n · Modern cryptography: Experience implementing, evaluating, or integrating cryptographic algorithms, including Module-Lattice-Based Key-Encapsulation Mechanism (ML-KEM). \n · Data protection and service integration: Experience with Trusted Data Format (TDF), Go-based security services, enterprise service integration, or serialization technologies such as Protocol Buffers. \n \n Job Type: \n\n • Full-time\n\n \n\n • Benefits:401(k)\n, • 401(k) matching\n, • Dental insurance\n, • Employee assistance program\n, • Flexible spending account\n, • Health insurance\n, • Health savings account\n, • Life insurance\n, • Paid time off\n, • Parental leave\n, • Professional development assistance\n, • Retirement plan\n, • Vision insurance\n\n \n Schedule: \n\n • 8-hour shift\n, • Monday to Friday\n, • Day shift\n, • Ability to work additional hours as needed to support mission requirements\n\n \n\n • Work Location: On-site – Charleston, SC or Reston, VA (Washington, DC metro)\n\n \n\n • Security Clearance: Active TS/SCI clearance required\n\n \n\n • Salary: $160,000–$215,000\n

• A CAREER THAT PAYS BACK - Earn up to $150,000 per year*, • START STRONG, STAY STRONGER - $10,000 sign-on bonus plus $800 paid orientation*, • LESS WORK, BETTER RIGS - 99% no-touch freight in premium late-model trucks Hirschbach is hiring CDL A truck drivers in your local area. We are not your typical trucking company. We are driver-focused, driver-first and we mean it. Driving for Hirschbach isn't just another job - it's THE job. We offer drivers industry-leading 24/7 support and our ultra-modern truck fleet comes with the latest features and technology. So if you have at least 6 months CDL-A truck driving experience, apply today to learn about options. You've tried the rest, now run with the best. • Limited time $10,000 sign-on/stay bonus.* OTR solo or teams drivers can start strong with Hirschbach., • Bring home up to $150,000 per year as a solo 1099 driver. Base CPM ranges from $1.17-$2.90, depending on length of haul.*, • Team up and increase earnings. Pre-existing teams only. Refer a teammate and earn $1,200. Net average $210,000 - $248,000 per truck per year; all expenses are split.*, • Minimum weekly pay incentive. Team drivers can count on a $3,000 minimum per truck per week.*, • Earn more, faster. Get $800 when you complete orientation, earn safety and performance incentives up to $0.30/mi, and add accessorial pay to your base CPM.*, • Run 99% No-touch freight. Our routes are built to keep you moving, so you spend less time loading and more time rolling., • Run solo or as an existing team. It's your route, your revenue, and your truck. The next step of your career growth starts here., • Flexible, friendly terms: No down payment, no credit check, walkaway lease., • Fixed, discounted fuel rate: Hirschbach drivers pay $.99/gallon for fuel, regardless of price at pump., • Full-service maintenance plan: Covers all mechanical parts for $0.10/mi. No out-of-pocket expenses!, • Affordable truck payments: average payments between $800-$900 per week., • Trick My Truck: After 1 year, spec your truck your way with custom colors and add-ons., • Premium trucks built for you. 2023-2026 Internationals and Freightliner Cascadias with inverters, large refrigerators, SmartTVs, heated/cooled seats, and lane assist., • Pay that grows with you. Solo drivers average $65,000-$85,000 per year, starting at $0.55CPM with automatic raises every 6 months up to $0.60CPM. Team drivers earn more, averaging $97,000-$126,000 per year with a $0.75CPM base.*, • Extra pay that stacks up fast. Earn up to $0.15CPM in monthly safety and performance incentives, plus stop pay, breakdown pay, layover pay, and detention pay-your time always counts.*, • Strong starts and big bonuses. New OTR hires may qualify for a $10,000 sign-on/stay bonus and earn $800 for completing the driver orientation qualification process.*, • Minimum weekly pay incentive. Team drivers can count on a $3,000 minimum per truck / $1,500 per driver per week.*, • Easy freight, driver-friendly policies. Run 99% no-touch freight, bring a pet or passenger along, and for teams-refer a teammate and earn $1,200 (pre-existing teams only)., • Modern trucks, built for comfort. Drive 2023-2026 fully specced Internationals and Freightliner Cascadias designed for comfort, safety, and efficiency., • Coverage you can count on. Medical, dental, and vision through Blue Cross Blue Shield, plus a free $10,000 life insurance policy., • Support your future. Take advantage of 401(k) with company match, vacation pay after one year, and optional critical illness coverage. All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • At least 23 years of age, • 6+ months verifiable CDL-A experience

• STRONG PAY, STRONG BENEFITS - Earn up to $85,000 per year + full benefits*, • START STRONG, STAY STRONGER - $10,000 sign-on bonus plus $800 paid orientation*, • LESS WORK, BETTER RIGS - 99% no-touch freight in premium late-model trucks Hirschbach is not your typical trucking company. We are driver focused, driver first. We offer our drivers industry-leading 24/7 support, so we are here when you need us. Our ultra-modern truck fleet comes with the latest features and technology like comfort-ride heated and cooled seats, lane assist sensors and large capacity refrigerators. They're designed to provide maximum comfort, maximum efficiency, and maximum safety. Hirschbach is hiring experienced drivers. Speak to a recruiter today to learn more. • Pay that grows with you. Solo drivers average about $65,000-$85,000 per year, starting at $0.55CPM with automatic raises every 6 months up to $0.60CPM.*, • Extra pay that stacks up fast. Earn up to $0.15CPM< in monthly safety and performance incentives, plus stop pay, breakdown pay, layover pay, and detention pay-your time always counts.*, • Strong starts and big bonuses. New OTR hires may qualify for a $10,000 sign-on/stay bonus and earn $800 for completing the driver orientation qualification process.*, • Easy freight, driver-friendly policies. Run 99% no-touch freight, bring a pet or passenger along., • Pay that grows with you. Team drivers average $97,000-$126,000 gross per year with a $0.75CPM base.*, • Extra pay that stacks up fast. Earn up to $0.15CPM in monthly safety and performance incentives, plus stop pay, breakdown pay, layover pay, and detention pay-your time always counts.*, • Strong starts and big bonuses. New OTR hires may qualify for a $10,000 sign-on/stay bonus and earn $800 for completing the driver orientation qualification process.*, • Minimum weekly pay incentive. Team drivers can count on a $3,000 minimum per truck / $1,500 per driver per week.*, • Easy freight, driver-friendly policies. Run 99% no-touch freight, bring a pet or passenger along, and for teams-refer a teammate and earn $1,200 (pre-existing teams only)., • Modern trucks, built for comfort. Drive 2023-2026 fully specced Internationals and Freightliner Cascadias designed for comfort, safety, and efficiency., • Coverage you can count on. Medical, dental, and vision through Blue Cross Blue Shield, plus a free $10,000 life insurance policy., • Support your future. Take advantage of 401(k) with company match, vacation pay after one year, and optional critical illness coverage., • 2023-2026 fully-specced Internationals and Freightliner Cascadias, • Large capacity refrigerator, • 24" SmartTV, • Heated + cooled seats, • Lane assist sensors All pay and bonus amounts may vary by job type, location, experience level, and performance and are subject to change based on company discretion. Talk with a recruiter to confirm specific details. There is no deadline to apply. Applications are accepted on an ongoing basis. • Valid Class A CDL, • At least 23 years of age, • 6+ months verifiable CDL-A experience

7192 - Charleston - 712 Savage Rd, Charleston, South Carolina, 29414 CarMax, the way your career should be! Position Overview As a Sales Consultant Trainee, you will be the foundation of an iconic, customer-first experience at CarMax. Your mission is to build genuine relationships, understand customer needs, and guide them toward the right vehicle—not just the most expensive one. This role offers paid training and mentorship, equipping you with the tools to succeed in auto sales without prior experience. Bring your ability to connect with people and your passion for learning, and we’ll help you grow into a future mentor, manager, or business leader. At CarMax, honesty and transparency drive everything we do—and they’ll help you thrive, too. Why CarMax? At CarMax, we are the nation’s largest retailer of used cars with stores from coast to coast, and we are still growing. We’re rethinking the way people buy cars – and our associates help us do just that. We believe work should feel meaningful and rewarding, with opportunities to make an impact every day. Whether you’re advancing your career or growing your skillset, we are here to drive you forward. Role Responsibilities • Assist customers in finding vehicles that fit their needs using your knowledge of CarMax inventory., • Guide customers through the entire process, including appraisals, test drives, and financing applications., • Deliver an exceptional experience by listening actively and providing clear, honest information., • Complete accurate documentation for all transactions to ensure a smooth and transparent process., • Collaborate with team members to meet customer needs and achieve store goals., • Maintain a professional, customer-first approach in every interaction, and stay informed about CarMax products, services, and promotions to better serve customers., • Follow CarMax Environmental, Health and Safety (EH&S) requirements and maintain a clean and orderly work area. Required Qualifications • Sales or customer service experience in retail or similar environments preferred., • Strong listening and communication skills with a customer-focused mindset., • High level of self-motivation and ability to work independently and as part of a team., • Comfort with technology for processing transactions and accessing inventory information., • Ability to adapt in a fast-paced, dynamic environment., • Commitment to integrity and transparency in every customer interaction., • Willingness to learn and grow through CarMax-provided training and mentorship. About CarMax At CarMax, we revolutionized the used car buying experience over 30 years ago by introducing transparency and integrity into the process. Our commitment to customer experience, innovation, and community has made us the nation’s largest used car retailer. With over 250 store locations and over 30,000 associates, we are proud to have been recognized as one of the Fortune 100 Best Companies to Work For® and are committed to helping our communities thrive. As an associate, you are part of an innovative movement to empower the modern customer and drive progress. Your work fuels change—sparking ideas, overcoming challenges, and shaping what’s next. Join us in creating a better future– for our company, our customers, and the communities we call home. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Sales Consultants earn an average of $65,000 annually. Top performers can earn $90,000+ annually. The hourly rate for this position is: $7.75 - $20.00 Commissions: This position is eligible for commission. Benefits: Except as otherwise required by state law, those considered part-time are eligible for sick time only in states that mandate it and amounts are accrued on a per pay period basis and range from 24 hours to unlimited based on state rules. In Washington, part-time Associates receive sick leave consistent with state law. Part-time Associates are also eligible for between 8 hours and 40 hours per year of vacation based on their length of service and subject to a 1 year waiting period. Part-time Associates are also eligible for 4 hours of Floating Holiday Time each calendar year subject to manager approval. For more details about benefits, please visit our _ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

7192 - Charleston - 712 Savage Rd, Charleston, South Carolina, 29414 CarMax, the way your career should be! Position Overview As a Sales Consultant Trainee, you will be the foundation of an iconic, customer-first experience at CarMax. Your mission is to build genuine relationships, understand customer needs, and guide them toward the right vehicle—not just the most expensive one. This role offers paid training and mentorship, equipping you with the tools to succeed in auto sales without prior experience. Bring your ability to connect with people and your passion for learning, and we’ll help you grow into a future mentor, manager, or business leader. At CarMax, honesty and transparency drive everything we do—and they’ll help you thrive, too. Why CarMax? At CarMax, we are the nation’s largest retailer of used cars with stores from coast to coast, and we are still growing. We’re rethinking the way people buy cars – and our associates help us do just that. We believe work should feel meaningful and rewarding, with opportunities to make an impact every day. Whether you’re advancing your career or growing your skillset, we are here to drive you forward. Role Responsibilities • Assist customers in finding vehicles that fit their needs using your knowledge of CarMax inventory., • Guide customers through the entire process, including appraisals, test drives, and financing applications., • Deliver an exceptional experience by listening actively and providing clear, honest information., • Complete accurate documentation for all transactions to ensure a smooth and transparent process., • Collaborate with team members to meet customer needs and achieve store goals., • Maintain a professional, customer-first approach in every interaction, and stay informed about CarMax products, services, and promotions to better serve customers., • Follow CarMax Environmental, Health and Safety (EH&S) requirements and maintain a clean and orderly work area. Required Qualifications • Sales or customer service experience in retail or similar environments preferred., • Strong listening and communication skills with a customer-focused mindset., • High level of self-motivation and ability to work independently and as part of a team., • Comfort with technology for processing transactions and accessing inventory information., • Ability to adapt in a fast-paced, dynamic environment., • Commitment to integrity and transparency in every customer interaction., • Willingness to learn and grow through CarMax-provided training and mentorship. About CarMax At CarMax, we revolutionized the used car buying experience over 30 years ago by introducing transparency and integrity into the process. Our commitment to customer experience, innovation, and community has made us the nation’s largest used car retailer. With over 250 store locations and over 30,000 associates, we are proud to have been recognized as one of the Fortune 100 Best Companies to Work For® and are committed to helping our communities thrive. As an associate, you are part of an innovative movement to empower the modern customer and drive progress. Your work fuels change—sparking ideas, overcoming challenges, and shaping what’s next. Join us in creating a better future– for our company, our customers, and the communities we call home. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Sales Consultants earn an average of $65,000 annually. Top performers can earn $90,000+ annually. The hourly rate for this position is: $7.75 - $20.00 Commissions: This position is eligible for commission. Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commissioned are eligible: • To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company., • For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our _ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

7192 - Charleston - 712 Savage Rd, Charleston, South Carolina, 29414 CarMax, the way your career should be! Position Overview As a Sales Consultant Trainee, you will be the foundation of an iconic, customer-first experience at CarMax. Your mission is to build genuine relationships, understand customer needs, and guide them toward the right vehicle—not just the most expensive one. This role offers paid training and mentorship, equipping you with the tools to succeed in auto sales without prior experience. Bring your ability to connect with people and your passion for learning, and we’ll help you grow into a future mentor, manager, or business leader. At CarMax, honesty and transparency drive everything we do—and they’ll help you thrive, too. Why CarMax? At CarMax, we are the nation’s largest retailer of used cars with stores from coast to coast, and we are still growing. We’re rethinking the way people buy cars – and our associates help us do just that. We believe work should feel meaningful and rewarding, with opportunities to make an impact every day. Whether you’re advancing your career or growing your skillset, we are here to drive you forward. Role Responsibilities • Assist customers in finding vehicles that fit their needs using your knowledge of CarMax inventory., • Guide customers through the entire process, including appraisals, test drives, and financing applications., • Deliver an exceptional experience by listening actively and providing clear, honest information., • Complete accurate documentation for all transactions to ensure a smooth and transparent process., • Collaborate with team members to meet customer needs and achieve store goals., • Maintain a professional, customer-first approach in every interaction, and stay informed about CarMax products, services, and promotions to better serve customers., • Follow CarMax Environmental, Health and Safety (EH&S) requirements and maintain a clean and orderly work area. Required Qualifications • Sales or customer service experience in retail or similar environments preferred., • Strong listening and communication skills with a customer-focused mindset., • High level of self-motivation and ability to work independently and as part of a team., • Comfort with technology for processing transactions and accessing inventory information., • Ability to adapt in a fast-paced, dynamic environment., • Commitment to integrity and transparency in every customer interaction., • Willingness to learn and grow through CarMax-provided training and mentorship. About CarMax At CarMax, we revolutionized the used car buying experience over 30 years ago by introducing transparency and integrity into the process. Our commitment to customer experience, innovation, and community has made us the nation’s largest used car retailer. With over 250 store locations and over 30,000 associates, we are proud to have been recognized as one of the Fortune 100 Best Companies to Work For® and are committed to helping our communities thrive. As an associate, you are part of an innovative movement to empower the modern customer and drive progress. Your work fuels change—sparking ideas, overcoming challenges, and shaping what’s next. Join us in creating a better future– for our company, our customers, and the communities we call home. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Sales Consultants earn an average of $65,000 annually. Top performers can earn $90,000+ annually. The hourly rate for this position is: $7.75 - $20.00 Commissions: This position is eligible for commission. Benefits: Except as otherwise required by state law, CarMax Associates are entitled to the following paid sick, vacation, and holiday time. Associates that are considered full-time hourly or commissioned are eligible: • To earn up to 48 hours of sick time per year accrued on a per pay period basis and between 80 hours and 200 hours per year of vacation time after a 90 day waiting period depending on years of continuous service with the Company., • For 8 hours of pay for each of a total of 6 paid scheduled holidays per year plus 1 floating holiday. If such an Associate does work on a scheduled holiday due to business need, they are eligible for Holiday Premium Pay. Associates considered full-time salaried are entitled to paid time away with no specified limit as needed for sick, vacation, bereavement, jury duty, holidays, floating holiday, etc. subject to manager approval. For more details about benefits, please visit our _ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

7192 - Charleston - 712 Savage Rd, Charleston, South Carolina, 29414 CarMax, the way your career should be! Position Overview As a Sales Consultant Trainee, you will be the foundation of an iconic, customer-first experience at CarMax. Your mission is to build genuine relationships, understand customer needs, and guide them toward the right vehicle—not just the most expensive one. This role offers paid training and mentorship, equipping you with the tools to succeed in auto sales without prior experience. Bring your ability to connect with people and your passion for learning, and we’ll help you grow into a future mentor, manager, or business leader. At CarMax, honesty and transparency drive everything we do—and they’ll help you thrive, too. Why CarMax? At CarMax, we are the nation’s largest retailer of used cars with stores from coast to coast, and we are still growing. We’re rethinking the way people buy cars – and our associates help us do just that. We believe work should feel meaningful and rewarding, with opportunities to make an impact every day. Whether you’re advancing your career or growing your skillset, we are here to drive you forward. Role Responsibilities • Assist customers in finding vehicles that fit their needs using your knowledge of CarMax inventory., • Guide customers through the entire process, including appraisals, test drives, and financing applications., • Deliver an exceptional experience by listening actively and providing clear, honest information., • Complete accurate documentation for all transactions to ensure a smooth and transparent process., • Collaborate with team members to meet customer needs and achieve store goals., • Maintain a professional, customer-first approach in every interaction, and stay informed about CarMax products, services, and promotions to better serve customers., • Follow CarMax Environmental, Health and Safety (EH&S) requirements and maintain a clean and orderly work area. Required Qualifications • Sales or customer service experience in retail or similar environments preferred., • Strong listening and communication skills with a customer-focused mindset., • High level of self-motivation and ability to work independently and as part of a team., • Comfort with technology for processing transactions and accessing inventory information., • Ability to adapt in a fast-paced, dynamic environment., • Commitment to integrity and transparency in every customer interaction., • Willingness to learn and grow through CarMax-provided training and mentorship. About CarMax At CarMax, we revolutionized the used car buying experience over 30 years ago by introducing transparency and integrity into the process. Our commitment to customer experience, innovation, and community has made us the nation’s largest used car retailer. With over 250 store locations and over 30,000 associates, we are proud to have been recognized as one of the Fortune 100 Best Companies to Work For® and are committed to helping our communities thrive. As an associate, you are part of an innovative movement to empower the modern customer and drive progress. Your work fuels change—sparking ideas, overcoming challenges, and shaping what’s next. Join us in creating a better future– for our company, our customers, and the communities we call home. CarMax is an equal opportunity employer, and all qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Sales Consultants earn an average of $65,000 annually. Top performers can earn $90,000+ annually. The hourly rate for this position is: $7.75 - $20.00 Commissions: This position is eligible for commission. Benefits: Except as otherwise required by state law, those considered part-time are eligible for sick time only in states that mandate it and amounts are accrued on a per pay period basis and range from 24 hours to unlimited based on state rules. In Washington, part-time Associates receive sick leave consistent with state law. Part-time Associates are also eligible for between 8 hours and 40 hours per year of vacation based on their length of service and subject to a 1 year waiting period. Part-time Associates are also eligible for 4 hours of Floating Holiday Time each calendar year subject to manager approval. For more details about benefits, please visit our _ website. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

Why Wells Fargo: \n Are you looking for more? Find it here. At Wells Fargo, we're more than a financial services leader – we’re a global trailblazer committed to driving innovation, empowering communities, and helping our customers succeed. We believe that a meaningful career is much more than just a job – it’s about finding all of the elements to help you thrive, in one place. Living the Well Life means you’re supported in life, not just work. It means having robust benefits, competitive compensation, and programs designed to help you find work-life balance and well-being. You’ll be rewarded for investing in your community, celebrated for being your authentic self, and empowered to grow. And we’re recognized for it – Wells Fargo once again ranked in the top five on the 2026 LinkedIn Top Companies list of best workplaces “to grow your career” in the U.S. Join us! \n About this role: \n Wells Fargo is seeking accomplished, people‑focused leaders interested in a Branch Manager career within the National Branch Network. This opportunity is designed for experienced managers who bring a strong foundation in branch leadership and are looking to apply their expertise within the Wells Fargo environment. \n As a Branch Manager, you will serve as the sales leader of the branch, accountable for acquiring, deepening and retaining customer relationships to drive consistent growth in primary checking, deposits, lending, credit cards and investments through disciplined execution, strong coaching, and effective performance management. You will lead, coach, and develop a team to consistently execute behaviors and improve banker productivity. You will foster an engaged, accountable culture focused on uncovering customer financial needs and recommending Wells Fargo solutions that deepen relationships and drive long‑term value. You will balance growth objectives with strong operational risk management to protect customers, employees, and the company. \n Your onboarding starts with participation in the Branch Manager Readiness Program which is intended to offer a structured and supportive transition into leadership at Wells Fargo. Participants gain hands-on experience through guidance, mentorship, job shadowing, and practical learning opportunities in day-to-day branch operations. The program provides foundational knowledge, real-world practice, and leadership readiness needed to effectively lead a team and make an impact from day one. Successful completion of the Branch Manager Readiness program is required to transition into a Branch Manager position. Branch assignment is based on business need and branch availability at the time of placement. While in training, this position is an interim, nonexempt role. Employees currently serving in a Branch Manager role at Wells Fargo are not required to complete the program. \n In this role you will: \n\n • Provide strong, inclusive leadership to build and retain a high‑performing team, establishing clear expectations, and managing performance through targeted coaching to deliver sales, service, and operational excellence.\n, • Lead a branch team to proactively identify customer financial needs and deliver tailored consumer and business solutions that drive both customer value and business outcomes.\n, • Use branch manager routines to build individual capability, confidence, and productivity, delivering consistent, high‑impact coaching through observation, feedback, and follow‑up while holding the team accountable to behaviors and outcomes aligned to Wells Fargo priorities.\n, • Partner closely with internal sales partners to provide customers a comprehensive, coordinated Wells Fargo experience across Wealth & Investment Management, Business Banking, and Home Lending to maximize relationship depth, customer value, and branch performance.\n, • Identify opportunities for making banking easier for customers through education and demonstration of available digital options.\n, • Leverage reporting and employee observations to gain insight into strengths and opportunities, taking decisive action to improve team performance and expand primary bank relationships and wallet share.\n, • Demonstrate ownership by balancing growth, operational soundness, and talent decisions while proactively managing risk, resolving issues, and modeling behaviors that protect customers, employees, and the company.\n\n Required Qualifications: \n\n • 5+ years of banking, financial services, or Branch Network experience, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education\n, • 2+ years of leadership experience\n\n Desired Qualifications: \n\n • Proven ability to hire, coach, and develop sales professionals and direct reports, fostering a culture of accountability, collaboration, adaptability, and high performance.\n, • Demonstrated ability to lead a customer-focused sales culture, driving measurable growth through coaching, accountability, disciplined execution, and taking ownership of performance outcomes, talent decisions, and risk management.\n, • Ability to analyze performance, identify strengths and opportunities, and execute action plans that enable the team to achieve business objectives.\n, • Exercise independent judgement and critical thinking skills to manage time, prioritize, and delegate tasks in a complex, fast-paced environment.\n, • Demonstrated success managing and coaching across affluent, high net worth, and business customer segments by identifying complex financial needs and building strong relationships with customers, internal partners, and community stakeholders.\n, • Ability to lead teams in influencing, educating, and connecting customers to technology, articulating the value of digital banking solutions to enhance customer experience.\n, • Knowledge of banking laws and regulations, including compliance controls, operational risk management, and loss prevention, with the ability to model and reinforce behaviors that protect customers, employees, and the company.\n\n Job Expectations: \n\n • Ability to work a schedule that includes Saturdays.\n, • Ability to travel in assigned geography up to 50% of the time during the first 6 months (and prior to or up until placement in a specific branch), depending on location.\n, • SAFE registration is required at the time of employment and Wells Fargo will initiate the process after your start date. Loan Originators must meet LO/CFPB requirements and comply with Wells Fargo policies, including standards related to financial responsibility, character, fitness, and criminal background. A credit report may be reviewed (credit score not included) and additional ongoing screening may apply.\n, • This position is not eligible for Visa sponsorship.\n\n Locations: \n\n • Ashley Plaza: 1305 Sam Rittenberg Charleston, SC 29407\n, • Brentwood Plaza: 4400 Dorchester Rd Charleston, SC 29405\n, • Broad Street: 16 Broad Street Charleston, SC 29401\n, • Citadel Mall: 828 Orleans Road Charleston, SC 29414\n, • Coleman: 507 Coleman Blvd Mt. Pleasant, SC 29464\n, • Freshfields: 100 Village Green Dr Johns Island, SC 29455\n, • James Island Financial Center: 751 Daniel Ellis Dr Charleston, SC 29412\n, • Johns Island: 3575 Maybank Hwy Unit W Johns Island, SC 29455\n, • Market At Oakland: 3080 Ironclad Alley Mt. Pleasant, SC 29464\n, • North Village: 6877 Dorchester Road North Charleston, SC 29418\n, • Wando Crossing: 1505 Highway 17 N Mount Pleasant, SC 29464\n\n Posting End Date: \n 6 Dec 2026 \n *Job posting may come down early due to volume of applicants. \n We Value Equal Opportunity \n Wells Fargo is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other legally protected characteristic. \n Employees support our focus on building strong customer relationships balanced with a strong risk mitigating and compliance-driven culture which firmly establishes those disciplines as critical to the success of our customers and company. They are accountable for execution of all applicable risk programs (Credit, Market, Financial Crimes, Operational, Regulatory Compliance), which includes effectively following and adhering to applicable Wells Fargo policies and procedures, appropriately fulfilling risk and compliance obligations, timely and effective escalation and remediation of issues, and making sound risk decisions. There is emphasis on proactive monitoring, governance, risk identification and escalation, as well as making sound risk decisions commensurate with the business unit’s risk appetite and all risk and compliance program requirements. \n Candidates applying to job openings posted in Canada: Applications for employment are encouraged from all qualified candidates, including women, persons with disabilities, aboriginal peoples and visible minorities. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process. \n Applicants with Disabilities \n To request a medical accommodation during the application or interview process, visit Disability Inclusion at Wells Fargo. \n Drug and Alcohol Policy \n \n Wells Fargo maintains a drug free workplace. Please see our Drug and Alcohol Policy to learn more. \n Wells Fargo Recruitment and Hiring Requirements: \n a. Third-Party recordings are prohibited unless authorized by Wells Fargo. \n b. Wells Fargo requires you to directly represent your own experiences during the recruiting and hiring process. \n c. Please be prepared to provide accurate information and supporting documentation in connection with any lawful employment and education verification conducted by Wells Fargo. \n

Job Description SUMMARY Performs all traditional warehouse duties: Operating a sit down and stand-up forklift, shipping, receiving, restocking, picking orders, loading trucks, unloading trucks, housekeeping duties. Also fills in as a backup driver during driver absences and/or additional delivery routes. When filling the driver roll will operate Class A, single axle or tandem axle day cabs with capacity of 45,000 lbs. or box truck delivering materials to and from customer shops and job sites. This position will be required to perform the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES (Other duties may be assigned) • Drives truck to destination providing accurate, timely and courteous service., • Collects signature for goods delivered., • Collects payment for goods delivered if required following proper procedures with COD/cash deliveries., • Maintains driver logbook or ELD device, trip reports, fuel tickets, toll tickets, vehicle condition reports to comply with state and federal regulations., • Operates truck following all safety policies, laws, maintains safe driving record, and notifies supervisor of any violations., • Inspects truck equipment and supplies such as tires, lights, brakes, gas, oil, and water., • Conducts pre-trip inspections per regulations/policy., • Operates slide side curtain trailers., • Secures load using runners, boards, ratchet straps, chains, binders around items to secure cargo during transit., • Ensures proper load stability and balance., • Assists in loading of trucks as needed., • Recommends optimal delivery route to assure quick delivery and timely service to customers., • Observes all company safety practices and procedures., • Presents professional image in appearance and behavior with customers, vendors, and co-workers., • Accurately verifies items and quantities during delivery., • Reports and documents all delivery variances., • When not assigned to fill the role of delivery driver, will perform material handler and warehouse duties which include receiving, verifying, and checking delivered material, restocking, picking orders, palletizing orders, staging orders, loading trucks, unloading trucks, operating sit down and standup forklifts, WMS RF scanning device and normal housekeeping duties., • Loads and unloads materials onto or from pallets, trays, racks, and shelves by hand., • Counts, weighs, and records number of units of materials moved or handled on daily production sheet., • Attaches identifying tags or labels to materials or marks information on cases, bales, or other containers., • Palletizes materials on to pallets and shrink wraps or bands material securely on pallet., • Lifts heavy objects by hand or with power hoist, cleans work area, machines, and equipment., • Operates sit down forklifts, standup electric lifts, moffets, pallet jacks, hand trucks, carts, to assist in loading or moving materials and products; moves levers and presses pedals to drive lift and control movement of lifting apparatus., • Ensures products are handled in accordance to established standards., • Loads, unloads, straightens, and organizes product and warehouse., • Controls and accounts for materials to minimize loss and damage., • Responsible for staging, transporting, shipping, or returning products into and out of the warehouse., • Some data entry computer work required., • Utilizes state of the art WMS radio frequency bar code scanning technology software and hardware SUPERVISORY RESPONSIBILITIES None required. EDUCATION & EXPERIENCE Must be eligible to complete certification and be licensed to operate forklift and regularly keep up to date with any changes in the requirements. Must have current driver’s license, as well as be D.O.T. certified with CDL license, Class A or B. CERTIFICATION, LICENSES, REGISTRATIONS None required. SKILLS & ABILITIES • Safety focus., • Alert and aware of surroundings., • Effective communication skills., • Ability to think quickly., • Ability to be patience in stressful situations., • Organizational skills., • Ability to read and analyze Information., • Adept at handling multiple complex tasks simultaneously., • Proficiency with prioritizing and meeting multiple deadlines., • Excellent time management., • Process improvement mindset., • Knowledge of inventory control., • Basic mathematical skills. Proficient understanding of units of measure., • Data entry skills., • Basic computer proficiency. Experience with WMS is preferred. PHYSICAL DEMANDS The Material Handler role requires regular physical activity, including standing, walking, bending, lifting, pushing, and pulling throughout the shift. Employees must be able to safely lift and move materials up to 50 pounds, with or without reasonable accommodation. The position may also require repetitive motions, operating material handling equipment, and working in a warehouse environment for extended periods. WORK ENVIRONMENT The Material Handler/Driver works in a warehouse and transportation environment that includes both indoor and outdoor conditions. The role involves exposure to moving equipment, vehicle traffic, varying weather conditions, and moderate noise levels. Employees may operate forklifts or other material handling equipment and drive company vehicles while adhering to all safety and DOT requirements. FLSA: Non-Exempt

Job Description \n At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. \n 787 Airframe in Boeing Commercial Airplanes is hiring for a Senior (Level 4) Structural Analysis Engineer for our Interiors Stress team to work at our North Charleston, SC location. \n \n At Boeing, our engineers share a passion to redefine what’s possible. \n To turn dreams into reality. To bring cutting edge technology to market. If you are seeking a dynamic, innovative environment, this opportunity is for you! This is a great opportunity to work in the Commercial Airplanes South Carolina Design Center, as a Structural Analysis Engineer. \n \n Primary Responsibilities: \n\n • \n Performs lead level “advise/assist/check” stress analysis responsibilities on Boeing 787 Aircraft Interiors products. \n • \n Performs stress analysis using classical hand analysis methods, Finite Element tools/methods, and/or Dynamic Simulation tools/methods. \n • \n Reviews and provides lead signature for Boeing technical oversight of supplier documents including engineering drawings, analysis, test plans, procedures, and reports. \n • \n Leads development, integration and documentation of structural requirements to establish the Interior Commodity designs. \n • \n Coordinates with other engineering groups to establish the product's environment such as load cases, interface architecture, and interface loads. \n • \n Guides product design and verifies structural integrity throughout the product lifecycle to develop the structural environment, characteristics and performance. \n • \n Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. \n • \n Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. \n • \n Supports in-service products by leading investigations into failures and analyzing improvements. \n • \n Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. \n • \n Active leader in the growth of a new organization performing lead level duties, mentorship, and training of developing team members. \n • \n Develops certification related documentation to support CFR Part 25 Type Cert projects. \n • \n Collaborates and performs oversight on projects with domestic or international partners/suppliers. \n • \n Applies Part 21 and Part 25 Code of Federal Regulations knowledge and facilitates interactions with Federal Regulators \n • \n Works under minimal direction \n\n \n Basic Qualifications (Required Skills/ Experience) \n\n • \n Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences) \n • \n 9+ years of related work experience or an equivalent combination of education and experience \n • \n 5+ years of experience performing stress analysis on interiors or related structures \n • \n 3+ years of experience working with Buyer-Furnished and Supplier-Furnished Equipment \n • \n Prior experience with aircraft, heavy structures, hardware systems or interiors manufacturing/production systems \n\n \n Preferred Qualifications (Desired Skills/Experience) \n\n • \n 7+ years of experience working on aircraft interiors such as Galleys, Lavatories, In-Flight Entertainment, Seats, In-Seat Power Systems, Crew Rest, Cabin Lighting, Interior Panels, Stow Bins, Cargo Systems, etc. \n • \n Experience leading the development and completion of certification related documentation \n • \n Experience leading and/or providing oversight of structural test programs on interiors products \n • \n Experience leading supplier technical oversight and collaborating with suppliers to solve technical challenges \n • \n Current or prior DER/AR/E-UM \n\n \n Conflict of Interest: Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process \n \n Drug Free Workplace: \n Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. \n \n At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. \n \n The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. \n The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. \n Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations. \n \n Pay Range Summary: 126,650 – $171,350 \n \n \n Applications for this position will be accepted until Nov. 27, 2026 \n \n Export Control Requirements: \n This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. \n Export Control Details: \n US based job, US Person required \n Education \n Bachelor's Degree or Equivalent Required \n Relocation \n This position offers relocation based on candidate eligibility. \n Visa Sponsorship \n Employer will not sponsor applicants for employment visa status. \n Shift \n This position is for 1st shift \n \n Equal Opportunity Employer: \n Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Looking for a career where hard work is valued, and your ideas and feedback are part of the way we operate daily? Want to bring your skills to a company that encourages teamwork and champions continued education and process improvement? \n Atlas Tech, a veteran-owned IT company serving multiple DoD customers in support of America's warfighters, is looking for a Senior Cloud Engineer in North Charleston, SC. This is an onsite position requiring a relocation if you are outside of the Charleston market. \n The ideal candidate for this position will have proven experience in a technology-driven program or project supporting the US Navy. If you have systems engineering skills, a strong work ethic and commitment to quality, we would like to talk to you about joining our growing team. \n You Will: \n\n • Design, deploy, secure, and sustain Microsoft Azure architectures, with preference for Azure Government over commercial cloud and Azure over AWS.\n, • Apply experience in DoD Impact Level environments; IL5 experience is strongly desired, and IL6 experience is ideal.\n, • Design hybrid-cloud solutions that run complementary services on premises and in Azure, including integration and management through Azure Arc.\n, • Engineer external connectivity and direct-connect solutions, including Azure ExpressRoute, VPN Gateway, routing, and connectivity to on-premises networks.\n, • Design and manage internal networking, including virtual networks, subnets, network security groups, VLANs, routing, and network segmentation.\n, • Implement cloud security using Microsoft Defender, Azure Firewall, VPN Gateway, secure baselines, least-privilege access, and Zero Trust principles.\n, • Design and administer Azure identity, role-based access control, privileged access, and service identities, including integration with program-provided NIS tools.\n, • Architect and support Azure Virtual Desktop, Windows and Linux virtual machines, and containerized workloads.\n, • Evaluate technical, cybersecurity, mission, and cost constraints and develop resilient Azure solution architectures and implementation plans.\n, • Develop repeatable infrastructure provisioning and configuration using Azure Automation integrated with Terraform; PowerShell, Bash, Python, and CI/CD experience is valuable.\n, • Troubleshoot complex cloud, network, identity, security, compute, and hybrid-integration issues across lab and production environments.\n, • Produce architecture diagrams, implementation plans, test artifacts, operating procedures, and RMF/ATO compliance evidence; participate in technical reviews and change management.\n\n You Have: \n\n • US Citizenship\n, • Possession of a Department of Defense (DoD) Secret Level Security Clearance with a current SSBI/T5 investigation, TS/SCI desired\n, • DoD 8140\8570 Certifications to be qualified as an Information Assurance Technician (IAT) Level II (e.g. CompTIA Security+ certification)\n, • 10+ years of experience with C4I systems with specific focus on systems engineering and cybersecurity support\n, • Bachelor’s Degree in Engineering, Computer Science, or related field\n, • Operating System Certificate (e.g., Linux+, Windows Server, CCNA, etc)\n, • Experience supporting Navy C4I or comparable DoD mission environments.\n, • Azure Government and classified-cloud engineering experience at IL6.\n, • Advanced Azure architecture experience with Azure Virtual Desktop, Azure Arc, ExpressRoute, Azure Firewall, Microsoft Defender, VPN Gateway, virtual machines, containers, and role-based access control.\n, • Hybrid-cloud architecture spanning on-premises infrastructure and Azure services.\n, • Terraform integrated with Azure Automation, Git-based version control, and CI/CD pipelines.\n, • Experience with Azure Kubernetes Service or other Kubernetes/container platforms.\n, • Familiarity with DISA STIGs, ACAS/SCAP remediation, RMF controls, POA&Ms, and continuous monitoring.\n, • Strong communication, technical documentation, collaboration, and leadership skills in a multi-disciplinary Agile environment.\n\n Want to hear more? Read on to see what our Team Members say about their experience: \n “To me, the best part about working at Atlas is the level of transparency afforded to everyone in the company. I’ve had plenty of jobs where I knew what I was doing, but at Atlas there is a concerted effort to make sure we also understand why, and how our role directly impacts the overall mission.” - Jess \n “With LEARNING as a core value, Atlas is constantly promoting ways to increase knowledge and stay at the forefront of the latest technology. Team members are regularly encouraged to continue learning and Atlas provides training resources and skills enhancement opportunities internally as well as education reimbursement if you prefer to obtain skills through outside resources or higher education.” - Wendy \n Atlas Tech is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, genetic information, or protected veteran status. We are committed to fostering an inclusive workplace where diverse perspectives are valued and respected. \n \n Accessibility & Accommodations \n Atlas Tech strives to make our website, www.atlas-tech.com, accessible to all users. If you need assistance completing the application process or require a reasonable accommodation due to a disability, please contact us at hr.recruiter@atlas-tech.com. \n \n This contact information is designated for accommodation requests only and cannot be used to inquire about the status of an application. Atlas Tech is committed to providing reasonable accommodations in accordance with the Americans with Disabilities Act (ADA). \n Atlas Tech offers a competitive salary, generous benefits package, and an opportunity to make a positive impact in your own community.

\n Vibra Travels is seeking a travel CT Technologist for a travel job in Charleston, South Carolina. Job Description & Requirements\n \n • Specialty: CT Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: 11/16/2026\n, • Duration: 13 weeks\n, • 36 hours per week\n, • Shift: 12 hours, evenings\n, • Employment Type: Travel\n \n \n VIBRA TRAVELS is seeking a Travel CT Technologist to join our expanding network of healthcare professionals. We’re looking for dependable, detail-focused travelers with experience performing diagnostic computed tomography imaging in an acute care or hospital setting. If you're ready to support accurate diagnosis and patient care while traveling the country, this is your opportunity! \n Minimum Qualifications: \n \n • Current, valid, and active license or certification to practice as a CT Technologist in the state of employment required\n, • Minimum of two (2) years of recent CT experience in a hospital or acute care setting required\n, • Graduate of an accredited Radiologic Technology program required\n, • ARRT (R) required; ARRT (CT) certification preferred and may be required by some facilities\n, • Current, valid, and active driver’s license required\n, • Ability to travel using publicly available air and ground transportation \n \n Certificates, Licensures, Registrations: \n \n • Current, valid, and active state license and/or ARRT certification required\n, • ARRT (CT) certification required or preferred based on facility requirements\n, • Current BLS certification from a Vibra Travels-approved vendor required, AHA preferred and required by some clients \n \n Additional Qualifications/Skills: \n \n • Experience performing CT scans with and without contrast\n, • Knowledge of radiation safety principles and contrast administration protocols\n, • Familiarity with CT imaging equipment and picture archiving and communication systems (PACS)\n, • Strong attention to accuracy and detail\n, • Ability to work independently and collaborate with radiologists and healthcare teams\n, • Ability to maintain patient safety and comfort during imaging procedures\n, • Free from illegal drug use and effects of alcohol in the workplace \n \n Unlike working for agency after agency, with our travel program, you get to work for a company: \n \n • Work with 1 recruiter from start to finish and assignment to assignment\n, • Local and Non-local positions available\n, • Competitive hourly rate in addition to tax-free stipend (if applicable)\n, • No pay cuts mid-contract\n, • Referral bonus (up to $1000 per referral!)\n, • License reimbursement if traveling to new state where new license is required\n, • Your pick of assignments at partner facilities from various health systems across the country \n \n Vibra follows federal and state requirements for vaccinations, vaccination offerings, and disease screening. Some states and locations may have different vaccine or screening requirements. \n To find out more information or check out our website at www.vibratravels.com \n Our recruitment team wants to get to know you. Share your passion! Please complete our online application and submit your resume for immediate consideration. \n Thank you for taking the time to consider our career opportunities. \n The Employer agrees to display the following notices supplied by DHS in a prominent place that is clearly visible to prospective employees and all employees who are to be verified through the system: \n a. Notice of E-Verify Participation \n b. Notice of Right to Work \n Posters \n Participating employers must display the E-Verify Participation and Department of Justice, Immigrant and Employee Rights Section (IER) Right to Work posters to inform their current and prospective employees of their legal rights and protections. \n What you see is what you get. We believe travel clinicians deserve full transparency. Every job we post includes a real pay range based on current bill rates. Before we submit you, we review the exact compensation package so there are no surprises later in the process. \n \n Vibra Travels Job ID #19196177. Pay package is based on 12 hour shifts and 36.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology/Imaging:CT Tech,11:00:00-23:00:00 About Vibra Travels\n \n Regardless of the placement you’re seeking, you’ll experience the same great benefits when choosing Vibra Travels for your next contract. \n \n White-glove service, every step of the way: \n At Vibra Travels, we believe in providing top-notch service to our travel nurses. From the moment you first contact us, you’ll experience a level of support and care that sets us apart from the rest. \n \n Your recruiter, your partner: \n Unlike other travel nursing agencies, we believe in building one-on-one relationships with our clinicians. Your dedicated recruiter will be your advocate, guiding you through the entire process and ensuring your needs are met. \n \n Clinical support at your fingertips: \n We understand that being a traveler can sometimes be challenging. That’s why we have a dedicated clinical support team available to answer any questions or concerns you may have during your assignments. \n \n Nationwide placements, endless opportunities: \n With Vibra Travels, you’ll have access to placements across the nation. Whether you’re looking for an acute care, rehabilitation, critical care, or behavioral health hospital, we have opportunities waiting for you in every corner of the country. \n \n Join us today and experience traveling done different! \n Benefits\n \n • Holiday Pay\n, • License and certification reimbursement\n, • Medical benefits\n, • Referral bonus\n \n

Job DescriptionDescription: Who we are: Aerzen USA Corp. is an international manufacturer of positive displacement blowers, hybrid blowers, screw compressors and turbo blowers. These high-quality machines are used for air and gas applications across many essential industries, including; Wastewater, Cement, Biogas, Pharmaceutical and Food, among many others. We are One Team, and we Empower our team members to be both Inquisitive and Evolutionary. What We Offer: Aerzen USA offers a competitive salary; generous health benefits (to include 96% company-paid benefit plans) with company HSA contribution; a 401(k) with company match; a tuition reimbursement program; and a profit share bonus package; along with the opportunity to work with a dynamic group of professionals. What You'll Do: As a Field Service Technician, you will perform and carry out all tasks related to installing, assembling, servicing, and repairing Aerzen products. They provide customers with prompt, professional and high-quality service. Work is performed at our location and/or at our customer’s location. Services provided may be scheduled or on-demand. Overnight travel on short notice is often required. Essential Functions & Responsibilities: • Performs startups, equipment inspections, troubleshooting, repairs and/or preventive maintenance service on all Aerzen Products at customer sites; Represent Aerzen in professional and courteous manner following all Aerzen and customer safety requirements., • Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital); Installing and terminating electrical, pneumatic and fluid connections; Understand controls narratives and analyze/troubleshoot process application related issues., • Analyzing and correcting communication issues; Properly address TCP/IP networks and RS-485 communications., • Perform repairs and assembly on Aerzen Products; Disassemble; assess damage and evaluate failures on machines; diagnose problems with Aerzen machines by evaluating material condition and asking the customer questions; demonstrates the ability to offer machine-based recommendations; can identify the root cause of a machine failure; Utilize defined procedures and a standard rebuild kit., • Read, understand and use equipment diagrams, checklists, engineering drawings, and other process documentation to perform service tasks, assembly and repairs on Aerzen Products., • Communicate with customers to discuss job requirements, provide recommendations and service options, listen to customer concerns, and provide status updates during service call and at completion., • Evaluate customer future needs and communicate information through appropriate channels., • Assist engineering in plant design, modifications and hazard analysis., • Plan and schedule travel to best meet customer requirement, service schedule requirement and time efficiency utilizing the Concur booking tool., • Complete job-related service reports, expense reports and forms in a timely basis; Collect data and make commissioning graphs using Company Software., • Complete written repair reports to document cause of failure, description of work performed, materials consumed, condition of equipment as received and as returned to the customer., • Conduct customer training on Aerzen Products when onsite., • Perform all work in accordance with quality standards, established safety procedures and maintains a clean, safe work area., • Participate in departmental initiatives such as, but not limited to, inventory counts, shop organization, clean-up and other duties assigned by the manager.Requirements: Position Qualifications: Education: Associates Degree (2 years schooling) in electronics technology or equivalent experience. Experience (yrs): Over 4 years of Field Service and Repair experience in rotating equipment. Software/Applications: Windows, Microsoft Office, Internet Abilities; TCP/IP networks and RS-485 communications; Allen Bradley PLC experience is preferred. Functional Skills: Excellent planning, prioritization, organization, and execution skills; high attention to details and ability to analyze large amounts of data; analytical and logical thinker who can problem-solve and implement solutions, excellent with time management. Other Skills: RS Logix 5000 experience is preferred; PLC or similar Ladder-Logic programming experience is desired; Ability to Interpret process flow, control wiring, as well as piping and instrumentation diagrams; Welding (brazing, cutting, welding, plasma) a plus. Strong customer-focus, excellent leadership and change-management skills, with the ability to listen, motivate, and influence others to action; high integrity and compliance mindset. Ability to travel more than 50% of the time. Monday - Friday with weekends back at home. Aerzen USA Corp., inclusive of its subsidiaries (further “Aerzen”) is an equal opportunity employer and selects employees based on skills and experience. Aerzen ensures that all persons are entitled to equal employment opportunity without regard to race, color, gender, gender identity, sexual orientation, pregnancy, age, national origin, religion, marital status, ancestry, disability, veteran’s status, and any other characteristic protected under applicable federal, state, or local laws. All employment decisions and actions are based on merit and made without regard to any characteristic protected by state, federal or local law. Aerzen is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation to participate in the job application or interview process, contact hr-usa@aerzen.com. All offers of employment at Aerzen USA Corp are contingent upon clear results of a thorough background check. In compliance with the Drug-Free Workplace Act of 1988, Aerzen USA Corp has a longstanding commitment to provide a safe, quality-oriented, and productive work environment. Alcohol and drug misuse poses a threat to the health and safety of Aerzen employees and to the security of the company's equipment and facilities. For these reasons, Aerzen USA Corp is committed to the elimination of drug and alcohol use and misuse in the workplace. Applicants being considered for hire must pass a drug test before beginning work. Refusal to submit to testing will result in disqualification of further employment consideration. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including termination of employment. Employers can only use E-Verify once you have accepted a job offer and completed the Form I-9.

Job DescriptionService Technician – Charleston, SC DISHER is partnering with a leading medium-sized technology company with its own solutions and products consisting of mobile transport robots for industrial material handling environments. As the Service Technician, you will play a crucial role in building custom logistic and production processes from the ground up. What it’s like to work there: This company offers a relaxed, informal work culture and great opportunities for professional growth and advancement within the organization. You will become part of a friendly and dynamic work environment where you are expected to work both independently and collaboratively. The company is based out of Germany with several locations in Europe, and its U.S. branch is quickly expanding while establishing new and innovative solutions. What you will get to do: • Repair and service electronic and mechanical robotic systems both onsite and offsite., • Assemble and electrically commission driverless transport systems and picking systems., • Provide temporary shift support after commissioning at customer sites., • Analyze and correct errors and malfunctions in automated systems., • Communicate repair needs effectively to project managers and after-sales teams., • Read and interpret schematics and technical manuals., • Conduct preventive maintenance on robotic systems., • Train end-users on the operation and maintenance of robotic systems.What will make you successful:, • Experience with electronics, automated systems, and AGVs is a plus., • Proficiency in using Windows and Windows applications (Office 365)., • Basic network troubleshooting skills., • Ability to learn and adapt to new software environments., • Valid US driver’s license for travel outside the home state., • Must pass a drug screening., • Certification in robotics or a related field is an advantage. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.