Senior jobs in Torrance, California - Page 12Create job alerts

Job Description Flight Software Engineer Location: Hawthorne, CA (near LAX) Relocation: Available Team Size: ~20 engineers Compensation: $90,000–$205,000 + equity (based on performance, level, and location) About the Mission Imagine a world where solar power doesn’t shut off at sunset. We are building a constellation of autonomous spacecraft designed to reflect sunlight back to Earth after dark—unlocking nighttime solar energy for the first time in history. This is not theoretical. We are launching our first spacecraft in 2026, backed by top‑tier investors and led by engineers who have built and flown real hardware in orbit. If you want to write software that will operate a fleet of autonomous spacecraft in low‑Earth orbit, this is that opportunity. What You’ll Build As a Flight Software Engineer, you will design and deploy the software that powers every spacecraft in our constellation. Your work will span: • Autonomous decision‑making and onboard control, • Real‑time embedded C/C++ on ARM microcontrollers, • Embedded Linux systems for mission‑critical operations, • Guidance, navigation, and control (GNC), • Command and data handling, • Fault detection, isolation, and recovery, • Over‑the‑air updates to on‑orbit vehicles, • Hardware‑in‑the‑loop testing and day‑in‑the‑life simulations You will own your systems end‑to‑end—from concept and architecture to implementation, testing, and on‑orbit performance. This is a role for engineers who want to see their code fly. What You’ll Do • Develop autonomous flight software for a new class of spacecraft, • Build the infrastructure for rigorous testing and large‑scale deployment, • Implement real‑time control loops, state estimation, and system health monitoring, • Design fault‑tolerant software using watchdogs, voting logic, ECC, and FDIR, • Work directly with electrical, mechanical, and mission operations engineers, • Support on‑orbit operations and deliver OTA updates to live spacecraft, • Contribute to architecture decisions that shape the entire constellation Minimum Requirements • Demonstrated excellence on a comparable software project (autonomy, robotics, flight software, or high‑reliability embedded systems), • 3+ years of professional C/C++ experience Ideal Experience You don’t need all of these, but the strongest candidates will have several: • BS in CS, EE, ME, or Aerospace Engineering, • Flight software experience for spacecraft or similar high‑reliability systems, • ARM microcontroller development, • Embedded Linux (Yocto, Buildroot, custom kernels), • Strong debugging, unit testing, and integration testing skills, • Networking fundamentals (TCP/IP, CAN, UART, SPI, I2C), • Fault‑tolerant software design (watchdogs, voting logic, ECC, FDIR), • Exposure to MISRA‑C, JSF, DO‑178C, or similar standards, • Experience in fast‑paced, high‑ownership engineering environments Who Thrives Here We hire outliers—people who have done something exceptional, unusual, or bold. Not just “good engineers,” but people who have demonstrated intensity, creativity, and a track record of doing hard things. Examples of backgrounds that stand out: • Built a complex robotics or embedded system solo, • Led major engineering projects early in your career, • Designed custom hardware or flight computers, • Worked on spacecraft, rockets, drones, or autonomous vehicles, • Promoted rapidly due to exceptional performance, • Achieved something rare in any domain—technical or otherwise If you’ve done something that made people say, “I can’t believe you pulled that off,” we want to talk to you. Why This Role Is Different • Your code will fly on every spacecraft we launch, • You will work directly with founders and senior engineers, • You will have ownership over major subsystems, • You will see your work go from idea → hardware → orbit quickly, • You will help define a new category of space technology This is a chance to build something the world has never seen before.

Job DescriptionDescription: THE COMPANY Cogir Senior Living, based in Scottsdale, Arizona, proudly oversees a network of senior living communities spanning 11 states nationwide. As a trusted leader in senior housing, we are dedicated to growth while maintaining our commitment to exceptional care for our residents and a supportive, growth-focused environment for our team members. At Cogir, our culture is rooted in the core values of human focus, creativity, and excellence, which inspire us to continuously improve and achieve excellence in all we do. Join us in our mission to enrich the lives of our residents while building a meaningful and fulfilling career! WHAT WE OFFER • Competitive wages, training, and growth opportunities., • Early access to paycheck (pay on demand)., • Health, Dental, Vision, and Life Insurance., • Paid Vacation, Holidays, and Sick Leave., • 401K with company match., • Free meals at work., • Employee Assistance Program. As a Kitchen Utility Associate (Dishwasher) in our community's restaurant, you help ensure our culinary team has clean pots to prepare delicious meals and dishware to deliver the meals to our residents. Our residents' dining experience begins with you. KEY RESPONSIBILITIES • Wash and sanitize dishes, utensils, pots, pans, and kitchen equipment according to established protocols., • Ensure all cleaned items are properly dried and stored in their designated areas., • Maintain the cleanliness of the dishwashing area, including sweeping and mopping floors., • Promptly remove trash, recycling, and food waste to help keep the kitchen organized and free of clutter., • Clean mats and garbage pails., • Clean and sanitize food preparation surfaces, storage areas, and kitchen equipment as needed., • Support the kitchen staff during meal preparation and service by replenishing supplies and equipment. Education and certificates: • A High School Diploma or equivalent preferred, but not required., • At least 6-12 months of experience in a dishwasher or kitchen support role is a plus, but not required., • Previous experience in senior living, healthcare, or hospitality settings is highly desirable., • Ability to work in a fast-paced environment and handle multiple tasks simultaneously., • Strong attention to detail and commitment to maintaining cleanliness., • Good communication and teamwork skills., • Ability to stand for extended periods and perform repetitive tasks., • Must be able to lift or move up to 50 pounds., • Comfortable working in hot, humid, and wet environments., • Availability to work flexible shifts, including weekends and holidays.

Job Description Senior Manufacturing Engineer Radiant is seeking a highly motivated senior manufacturing engineer who will be working closely with design engineers to innovate on the production of complex mechanisms and structures critical to our microreactor technology. You will ensure reliable, safe, quality, and delivery of the Kaleidos demonstration unit that will test in 2026 at the Idaho National Lab and be instrumental to testing the first new reactor design in over 50 years. Responsibilities and Duties: * Responsible for the manufacturing and inspection process for critical components and assemblies within the Kaleidos microreactor. * Partner with design engineers to develop innovative production methods for complex mechanisms and structures. * Develop, qualify, and refine manufacturing processes to meet all design and business requirements including safety, quality, efficiency, and delivery. * Develop and execute manufacturing specifications and fabrication instructions. * Manage manufacturing bill-of-materials (mBOM) for components and assemblies. * Identify and develop appropriate suppliers for component sourcing and fabrication. * Identify, plan, and execute capital equipment, machine, and layout upgrades to meet evolving production requirements. * Drive initiatives for continuous improvement in manufacturing processes and product quality. Required Skills and Qualifications: * Bachelor’s degree from an accredited institution in mechanical, manufacturing, or other related engineering discipline. * 4+ years of experience with manufacturing of mechanical products in a production environment, preferably in high-tech or energy sectors. Desired Skills and Qualifications: * Master’s degree from an accredited institution in mechanical, manufacturing, or other related engineering discipline. * Experience with machining and ancillary operations such as milling, turning, grinding, EDM of materials. * Experience with interpreting engineering drawings and models, Geometric Dimensioning & Tolerancing (GD&T). * Experience with inspection systems including manual gauges and coordinate-measuring machine (CMM). * Experience with non-destructive testing/non-destructive evaluation (e.g. fluorescent penetrant inspection, radiography, eddy current). * Experience with custom machine design; electromechanical systems, motors, actuators, linear rails, bearings, lifting/rigging, etc. * Experience with design of multi-component assemblies in CAD (NX or similar). * Strong problem-solving skills and attention to detail. * Self-motivated with strong organizational, written, and oral communication skills. * Demonstrated ability to work collaboratively with design and operations teams. Additional Requirements * Must be willing to work extended hours and weekends as necessary to accomplish our mission. * Must work 100% onsite at El Segundo HQ. Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $133.5K - $184.8K

Job Description Do you have a passion for learning about various business models and understanding what separates strong performing companies from weak ones? Have you ever envisioned yourself identifying the next category-leading business? Do you get energized by discussing strategy and growth levers with upper management? K1 is seeking a Private Equity Business Development Intern for our Manhattan Beach Office. Interns will learn the ins and outs of what makes an interesting investment prospect and will have the opportunity to work closely alongside senior team members. Interns will develop an expansive knowledge of various business models and the fundamentals of Private Equity business analysis. We encourage applicants of all majors to apply. At the conclusion of the internship program, top performers may be eligible to receive full-time offers to join the Business Development team. Responsibilities: • Assist with industry and target company research;, • Participate in direct outreach to target companies;, • Shadow calls with target company management and assist in company analysis;, • Support and shadow day-to-day Business Development operations;, • Work within our proprietary systems to assist with data uploading and cleanliness;, • Current Junior-level standing from all majors (rising Senior during Summer 2026), • High intellectual curiosity and strong people skills;, • Self-starter; ambitious; team-oriented;, • Exemplary communication and relationship skills (verbal and written);, • Entrepreneurial spirit with a positive attitude;, • Opportunity for full-time offer at the end of the internship., • Lunch provided in-office every day. About K1: About K1 K1 is one of the largest investors in small-cap AI-powered software. Dedicated to transforming lives and industries by building category leaders in technology, K1 has invested in over 275 companies since inception. Headquartered in Manhattan Beach, California, the firm partners early with founders and management teams to build AI-powered, mission-critical systems of record for enterprise clients globally. For more information, visit k1.com and follow K1 Investment Management on LinkedIn. As of the date of this posting, K1 Investment Management, LLC reasonably expects to pay $30/hour for the position of Intern, Business Development. Powered by JazzHR tOKmYwK3KY

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Capture Manager to join our team. Reporting to the Director of Business Capture, you will be responsible for leading Cesium’s capture and proposal efforts for government and commercial opportunities. This position will manage all proposal efforts including ROMs, NTEs and firm proposals. The Senior Capture Manager will need to effectively partner with all proposal team members (e.g. Contracts, Program Management, Engineering, Supply Chain, Finance, Manufacturing Operations, etc.). The position will be the internal/external point of contact for proposal operations decisions, schedule requirements and contract clarifications. This role will require an individual to build and maintain relationships with our customers and strengthen those relationships to drive proposal completion.JOB DUTIES AND RESPONSIBILITIES • Manage and execute comprehensive business capture strategy to identify, pursue, and win new business in the area of satellite communications with both commercial and Government opportunities., • Foster and maintain strong relationships with Government Agencies, industry partners, and potential customers to understand current needs and timelines to position the organization as a preferred provider for communication payloads., • Conduct market research and competitive analysis to identify trends, customer needs, and areas for business expansion., • Organizes and leads proposal teams to produce on-time, complete and compliant proposals that support efficient negotiations with the customer., • Ensure win strategy, technical solution, win themes, discriminators, compliance, and clear understanding of the requirements are well-articulated and consistent throughout final proposal documents., • Works closely with leadership to identify how each proposal activity supports and or augments our overall strategy., • Support development of standard pricing and estimating tools to support program pursuits and bid decisions., • Reviews pricing for accuracy and reasonableness, consistency and compliance of BOE’s, and that the cost volume is responsive to each RFP’s requirements., • Manage preparation of required sign off packages and support of fact-finding, negotiation and post-award audit activities., • Uses effective communication and leadership to ensure the team understands the return on investment, how their decisions affect the business opportunity., • Works closely with the program managers during negotiations to provide justification for BOEs and construct counter offers., • Creates and executes plans with ability to manage those initiatives throughout the full execution, including wide ranging, and in-depth experiences and agilities in large scale transition to production., • Leads teams supporting proposal capture to program execution hand-offs; ensuring successful program start up with baselined technical requirements/performance, scope, deliverables, cost, and schedule.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Electrical or Aerospace Engineering from an accredited university and minimum 12 years prior relevant experience. Advanced degree desired (MBA, MS)., • Proven track record of managing new business opportunities in the areas of airborne and space-based communication systems., • In-depth knowledge of space-based communication systems including phased array antennas and processing electronics solutions., • Strategic thinking and analytical skills to identify and pursue business opportunities that align with company core business areas and company goals., • Strong business acumen to manage and execute effective business capture strategies to drive revenue growth., • Experienced in proposal pricing methodologies/tools and creating Basis of Estimating (BOE) to support labor and material bids., • Understanding of proposal and gate review processes., • Demonstrated experience in proposal development with multiple stakeholders and ensuring compliance against proposal evaluation criteria and requirements., • Working knowledge of CAS, FAR and other Government Procurement regulations as they pertain to each proposal., • Excellent communications and interpersonal skills with the ability to work across business areas, manage diverse tasks, requirements and commitments and interface successfully with numerous disciplines., • Demonstrated complex problem resolution by leading a diverse team of engineers, technical writers, and graphic artists to achieve proposal capture success., • Expert knowledge of competitive landscape with the ability to identify best practices and how to best utilize within the company., • Program Management, EVMS or equivalent certification.

Job Description Are you ready to join a Global Leader in the Freight Forwarding and Contract Logistics field, who knows their employees are their greatest strength? LOGISTEED-America is on a mission to deliver high-quality transportation and logistics services and help make the world a better place for generations to come. We are looking for a Director of CHB Compliance to join us on this mission. Have you handled commodity classifications, writing customs bonds, overseeing audits and have enjoyed 15 years of more in the field of freight forwarding or international logistics? Then this role maybe a great next step! Location: Can be located at any of our following nation-wide offices: Monterey Park, CA; Fullerton, CA; Forest Park, GA; Elk Grove Village, IL; Mineola, NY; Seattle, WA Summary The Director of CHB Compliance reports to the LOGISTEED-America, Inc. VP of Corporate Administration. LOGISTEED‑America is seeking a seasoned Director of Customs House Brokerage & Compliance to lead and strengthen our U.S. import brokerage compliance program. This senior leadership role is ideal for a strategic compliance professional with deep regulatory expertise and a passion for building high-performing, accountable teams. What You’ll Do • Lead all U.S. Customs Brokerage compliance activities across branches, ensuring full compliance with CBP and all Participating Government Agencies (FDA, PGA, etc.), • Set and enforce national CHB compliance policies, procedures, and reasonable care standards, • Serve as the company’s brokerage compliance subject matter expert for clients, sales teams, and operations, • Provide regulatory guidance, training, audits, and compliance presentations internally and externally, • Oversee post-entry activity including PSCs, protests, prior disclosures, penalties, and mitigations, • Manage ACE portal activity, POAs, employee reporting, audits, and recordkeeping, • Conduct branch compliance audits, issue corrective action plans, and publish scorecards, • Support client classification projects, FDA compliance, rulings, and reconciliation programs, • Build strong working relationships with CBP and other government agencies, • Extensive experience in U.S. Customs brokerage compliance and import regulations, • Proven leadership experience managing compliance teams and multi-branch operations, • Strong knowledge of CBP regulations, FDA/PGA requirements, audits, and post-entry processes, • Excellent communication, presentation, and stakeholder management skills Preferred Qualifications, Required Knowledge Skills & Abilities and Working Conditions Previous Work Experience • Minimum of 15 years brokerage experience, • Strong classification and regulatory knowledge, • Compliance policy development and auditing experience, • Bachelor’s degree, • Equivalent work experience will be considered in-lieu of education, • Work well with individuals of different languages and cultures, • Effective decision making, sound judgment, and initiative, • Excellent organization skills, • Excellent verbal, written communication & presentation skills, • Understanding of brokerage CTPAT minimum security criteria (MSC), • Strong attention to detail, • Ability to understand any and all safety requirements and regulations (OSHA), • Ability to make decisions in an objective manner, • Strong written and verbal communication skills, • Organizational, people, and interviewing skills, • Conflict resolution skills, • Staff management; requires flexibility and understanding that all staff may be required to perform duties outside their normal area of expertise to meet the mission and goal, • Ability to respond to situations in a prompt and professional manner, • Proven professional and sound judgment in the management of difficult and / or sensitive matters, • Provide excellent customer service to internal and external customers, • Ability to work in multiple systems and ability to input and retrieve data are a must, • Must be able to read, write and count, • Intermediate/Advanced Proficiency in Microsoft Office: Word & Excel, • Energetic and highly motivated to succeed, • Proven strong business acumen, • Fluency in English, • Ability to read, analyze and interpret compliance regulations and requirements Must be legally authorized to work in the United States Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to stand, walk or sit; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, bend crouch or crawl; talk or hear; taste or smell. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move objects up to 25 pounds, and occasionally lift and/or move up to 35 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment One hundred percent of work time will be spent in an office setting where the environment is climate controlled. LOGISTEED America, Inc. is an equal opportunity organization. We abide by all applicable equal opportunity laws and regulations. We recruit, employ, train, compensate, and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. PAY TRANSPARENCY NONDISCRIMINATION PROVISION - The company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Information is obtained as part of an employee’s essential job functions if: (1) access to compensation information is necessary to perform that function or another routinely assigned business task, or (2) the function or duties of the position include protecting and maintaining the privacy of employee personnel records, including compensation information. Nothing in this statement prevents LOGISTEED America, Inc. from disciplining, terminating, or otherwise taking adverse action against an applicant or employee because they have violated another workplace rule. LOGISTEED America, Inc. fully supports the above pay transparency nondiscrimination statement. EOE/M/F/D/V Pay Range: $160,000 - $200,000 - DOQ

Job DescriptionDescriptionAs a Senior Mission Design Engineer at Impulse Space, your core responsibility will be to design and optimize in-space servicing missions which meet or exceed the requirements of potential customers. This role is part of the Product Management team but will require working closely with multiple teams including the Business Development and Engineering teams. This role will support the Business Development team in proposal development and be responsible for ensuring the mission designs and solutions proposed are technically sound. Some travel to interface directly with customers may be required. Responsibilities • Create mission designs which efficiently accomplish the stated goals of potential customers, • Maintain familiarity with the technical performance capabilities of Impulse’s space vehicles, • Develop tools to efficiently analyze, interpret, and present mission design results, • Assist in the effort of incorporating mission design technical details into written proposals, • Meet with customers to collect requirements and hear feedback regarding proposed mission designs, • Analyze proposed mission designs for effectiveness and identify areas of improvement, • Assist the Engineering team in the effort to continuously improve the spacecraft simulation and trajectory optimization software suite, • Work closely with the Business Development team to understand the needs of each customer and agree on the best approach for each proposal opportunity, • Examples of technical effort the mission design process may include: high-level CONOPs creation, maneuver design and trajectory optimization, requirements compliance verification, CAD fit checks, propellant budgeting, power budgeting, link budgeting, etc. Minimum Qualifications • Bachelor’s degree in a technical field, • 4+ years of experience working in a technical role, • Ability to communicate technical material clearly and professionally, • Working knowledge of orbital mechanics and spacecraft operations, • Functional knowledge of spacecraft systems design and payload accommodations, • Proficient in at least one programming language with a preference for Python Preferred Skills and Experience • Master’s degree in a technical degree area, • Experience in one or more customer-facing roles, • Experience assembling spacecraft, overseeing the assembly of spacecraft, or integrating payloads onto spacecraft, • Experience operating spacecraft on orbit, • General familiarity with the space industry, • Demonstrated ability to operate in a startup environment, • Experience operating CAD software Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Senior Tax Accountant -Japanese Bilingual Required Location: Gardena, CA (Hybrid – 2–3 days in office) Employment Type: Full-time, Exempt Salary: $95,000 – $120,000 (DOE) We are a Japanese accounting firm seeking a Japanese-English bilingual Tax Senior to join our team. This role is ideal for professionals with 3–5 years of tax experience who are looking to grow their career in a collaborative and flexible work environment. Responsibilities • Prepare and review corporate tax returns and related filings, • Handle tax compliance and reporting in accordance with applicable regulations, • Support tax planning and advisory services for clients, • Communicate with clients regarding tax matters and documentation, • Collaborate with internal teams to ensure accurate and timely tax filings, • Stay up to date with changes in tax laws and regulations Qualifications • 3–5 years of tax experience (corporate tax required; public accounting or in-house tax experience acceptable) • Experience in public accounting or tax is preferred, • Experience in a Big 4 or similar public accounting firm is highly preferred, • CPA or EA license is not required; however, candidates pursuing CPA/EA or with relevant coursework are highly preferred, • Strong understanding of tax regulations and compliance, • Excellent analytical, organizational, and communication skills Language Requirement • Japanese-English bilingual required Work Environment • Hybrid work schedule (2–3 days in office), • Team-oriented and supportive work environment, • Opportunity for long-term career development Benefits • Medical, Dental, Vision, • 401(k), • Paid Sick Leave, • Paid Time Off, • Life Insurance Please contact Satomi Honda for this position: (213) 448-7822

Job Description Salary: $125000-$135000 Other Forms of Compensation: bonus Pay Grade: [[payGrade_obj]] Morrison Healthcare, a Compass Healthcare company, is a leader in healthcare food and nutrition services company, serving more than 1,000 hospitals and healthcare systems across the country. With more than 31,000 associates nationwide, Morrison uses the Power of Food to create personalized dining experiences for patients and in their cafés to advance the healing and healthful missions of its clients. Morrison has been serving some of the nation’s largest health systems for more than 70 years, and it leverages culinary, nutritional, and operational expertise to provide consistency and transform the healthcare experience. Since 2012, Morrison has been recognized as one of Modern Healthcare’s Best Places to Work and Training Magazine has named it a Top 125/APEX Award Training Organization. Morrison has more than 1,600 registered dietitians and 1,200 executive chefs, and serves more than 600M meals annually. Job Summary Job Summary: The Sr. Director of Dining Services is responsible for overseeing the day to day Foodservice operations. You will manage and lead a team of employees, and also be responsible for managing client relationships, profitability of the account, and talent development. Key Responsibilities: • Operates the department in accordance with the approved budget, while providing the client with the maximum value for the dollars spent, • Ensures that the food offered to the client is of superior quality, • Directs and conducts safety, sanitation, and maintenance programs, • Maintains excellent relationships with clients as well as other departments within the community, • Promotes the professional growth and development of the entire team, • Bachelor's Degree or equivalent years of additional experience, • Minimum of five years of Proven Leadership expertise, • Two to four years of direct foodservice operational management experience with inventory and purchasing knowledge and control, • Strong knowledge of food and catering trends with a focus on quality, production, sanitation, food cost controls, and presentation, • Knowledge of P&L accountability and contract-managed service experience is desirable, • ServSafe® certified a plus Morrison Healthcare is a member of Compass Group USA Click here to Learn More about the Compass Story Associates at Morrison Healthcare are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Flexible Time Off, • Paid Parental Leave, • Holiday Time Off (varies by site/state), • Personal Leave, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Morrison Healthcare maintains a drug-free workplace. Req ID: 1532154 Morrison Healthcare MELANIE ATKINS [[req_classification]]

Job Description Overview Senior OPIR Systems Engineer LOCATION: El Segundo, Ca JOB STATUS: Full-time CLEARANCE: Top Secret TRAVEL: As Needed SALARY: $170,000 - $190,000 We are seeking an experienced Overhead Persistent Infrared (OPIR) Acquisition Engineer with a strong systems engineering background to support United States Space Force (USSF) space‑based missile warning, missile tracking, and battlespace awareness programs. The ideal candidate will bring deep expertise in OPIR mission architectures, sensor payloads, ground processing, enterprise integration, and the end‑to‑end mission thread. In this role, you will provide technical leadership and acquisition insight across the program lifecycle, helping the government shape requirements, evaluate contractor designs, drive system integration, and ensure mission capability is delivered on schedule. This position requires an active TS clearance REQUIRED QUALIFICATIONS / SKILLS • Master’s degree in computer science, Engineering, or related technical field (required). Work experience may be substituted for degree., • Minimum of 10 years relevant experience in development, implementation and integration of payload satellite and ground missions and launch missions, assembly, integration, launch & operations., • Must have an active and transferable DoD Top Secret security clearance with current investigation. PREFERRED QUALIFICATIONS / SKILLS • Familiarity with Space System Command (Formerly Space and Missile Systems Center) space and ground satellite systems., • Strong leadership skills leading diverse teams of subject matter experts, technicians, and specialists in detailed, highly technical, HW and SW integration and test activities., • Ability to communicate with Government action officers of varying experience and technical backgrounds. Experience developing and providing informational and decisions briefing to senior Government officials., • Ability to interact and coordinate with development contractors to determine “best value” alternatives for implementation., • Ability to lead and communicate to geographically distributed and remote work staffs., • Good working knowledge of space-based sensing systems, preferably in both Geosynchronous and Highly Elliptical orbital regimes. Experience in Space to Ground compatibility testing and integration activities. Knowledge of spacecraft initialization, calibration, tuning and transition to operations activities for OPIR Strategic Missile Warning systems. Understanding of Spacecraft and terrestrial communications subsystems., • Excellent and detail-oriented organizational, interpersonal, and communications skills, • Advanced-level competency with Microsoft Word, Excel, PowerPoint, and Outlook RESPONSIBILITIES • Provide expert technical and acquisition support for OPIR space and ground segments across the full lifecycle (requirements, architecture, design, integration, test, and transition to operations)., • Support government program managers with systems engineering analysis, technical trade studies, and risk assessments., • Evaluate contractor proposals, designs, interfaces, and verification approaches; provide informed recommendations to the government., • Participate in enterprise level testing and provide recommendations to government on resolution of issues, • Perform assessment of contractor deliverable and design reviews., • Perform mission assessments of technical and schedule readiness for satellites and ground system., • Work with development contractors to witness factory performance testing, requirements verification, functional validation and conduct physical and functional configuration audits., • Provide mission thread‑level judgment on OPIR architectural impacts, technical feasibility, and programmatic risk., • Help the government identify opportunities for digital engineering, modeling and simulation, prototyping, and risk‑reduction activities., • Coordinate with cross‑program stakeholders (space, ground, networks, cyber, mission partners) to ensure enterprise integration and interoperability. #CJ

Job DescriptionSingerLewak is a Top 100 accounting and consulting firm primarily operating in the western region. Serving clients since 1959, SingerLewak has developed a reputation for excellence and expertise in the accounting and management consulting industry. Providing the services of a large firm with a blended environment of practices, services and industry specializations, SingerLewak continues to demonstrate renowned industry leadership year-over-year. The firm takes pride in client service and professional and personal advancement, as demonstrated by our SL forward program which promotes a culture of learning and growth through targeted development and leadership programs and SL Cares, together with a continual focus on client service and technological evolution.Responsibilities • Performs technical tax review and approval of all tax returns and governmental tax examinations of any complexity., • Serves as a subject matter expert in discipline or industry., • Assumes full responsibility for larger tax returns and delegates to the various tax preparers as deemed necessary., • Assumes client service responsibility for clients the Tax Manager works directly with or clients where the responsibility is delegated from the Partner., • Delegates and manages governmental tax examinations; may represent the client before the appropriate taxing authorities., • Works to develop responsible, trained staff by assisting in recruiting, performance evaluations, development training aids, and acting as an instructor in professional development programs., • Assumes responsibility for smooth flow of tax returns through the tax preparation system to assure accurate, complete and timely preparation and delivery of all clients’ tax returns., • Accurate and timely billing and collection processes are made., • Prepares other reports and projects as requested from time to time by the partners., • Researches and evaluates tax preparation and tax research software for recommendation to partners., • Participates in firm practice development efforts through involvement with referral sources, community and industry activities.Qualifications, • Demonstrated knowledge of current tax laws., • Proficiency in use of computer tax preparation, tax research, and tax planning software programs., • Occasional overtime work required throughout the year. Heavy overtime work required from January 1 to April 15, may be in excess of 55 hours per week., • Seven to ten years' experience in public accounting, demonstrating a proven progression in tax complexity, scope, and research., • At least two (2) years' experience representing clients before taxing authorities., • Minimum one (1) year experience supervising and directing work of tax preparers., • Bachelor’s degree in accounting required, master’s degree in taxation preferred., • Minimum of forty hours of continuing education is required each year to maintain and develop technical and business skills., • A current and valid certified public accountant’s license is required., • Must be a member in good standing with the American Institute of CPAs.SingerLewak is an affirmative action-equal opportunity employer and complies with all applicable federal, state and local laws regarding recruitment and hiring. All qualified applicants are considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other category protected by applicable federal, state or local laws.

Job Description Senior Manager, Regulatory Systems Engineering Radiant is seeking an experienced Engineering Manager who loves to think outside the box and challenge convention; in this role you will lead the authorization process for reactor deployment with our military partners. You will be responsible for regulatory submissions and timelines, collaborating across technical teams to create and deliver a formal application. You will lead interactions between regulators and the engineering team to obtain clarity and answers on regulation as well as manage and provide mentorship to junior members of the team. This is an opportunity to bring advanced nuclear technologies to market while also influencing the federal government and modernizing regulation. Responsibilities: * Manage the customer relationship, coordinating interactions and meetings, tracking deliverables, submission and acceptance, and compliance to contracts. * Own end to end licensing execution efforts required to fulfill an application deliverable, ranging from detailed safety analysis to a physical protection plan. * Partner closely with internal stakeholders and external regulatory bodies to drive efficient project execution and authorization. * Oversee execution by technical teams including design reviews and regulatory and quality documentation; organize their inputs into data products and reports; raise regulatory concerns and see through timely and successful resolution. * Proactively review approaches and decisions as they relate to regulatory efforts to ensure adherence to Radiant’s novel and efficient licensing paths. Required Skills and Qualifications: * Comfortable working in uncertainty on first-of-a-kind projects. * Bachelor’s degree in engineering (nuclear, mechanical, electrical, computer science, or similar) from an accredited institution. * 5 years experience in a regulated industry, preferably nuclear programs regulated by the NRC or DOE. * Experience directly interfacing, interpreting and implementing regulatory requirements, with a focus on streamlining and right-sizing. * Excellent verbal and written communication and negotiation abilities; ability to navigate regulatory conversations effectively and write technical documentation. Desired Skills and Qualifications: * Thorough understanding of the engineering design process in a fast paced or agile hardware development environment * Experience in emergency preparedness, fire protection, safety analysis, radiation protection or other related regulatory subjects. * Strong engineering fundamentals with an ability to understand and translate applicable portions of system design into a license application. Additional Qualifications: * Must be willing to work extended hours and weekends as necessary to accomplish our mission * Must work 100% onsite at El Segundo HQ Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $160,500 - $236,250

Job DescriptionSalary: $24 - $29 ThePermanent Supportive HousingCase Manager provides intensive casemanagement to formerly unhousedTransition Age Youth (TAY) and families with complex needs, including chronic medical conditions, mental health, and substance use disorders. Using practices such as MotivationalInterviewing(MI), Critical Time Intervention(CTI), and Stages of Change(SoC), the Case Manager supports clients in building stability, independence, and long-term housing retention. ESSENTIAL FUNCTIONS • Manage a diverse caseload of TAY residents with significant barriers, including unhoused, trauma, and co- occurring disorders., • Document case notes and resident progress in CHAMP and HMIS databases., • Conduct assessments, create individualized serviceand goal plans, and provide ongoing support., • Maintain consistent contact with clients through unit visits, check-ins, and crisisinterventions., • Facilitate supportive services, including life skills groups, wellness activities, and referrals., • Assist with universal housingapplications and coordination through CES, FSC, and other systems., • Collaborate with property management and participate in team meetings andtraining., • Present resident case reviews to the Senior Housing Program Manager on a bi-weekly basis., • Provide coverage for evening/weekend programs as needed and transport clients in UBH van to various agencies such as LACDMH, DMV, SSA or other support group meetings., • Responsible for reporting abuse, as a mandated reporter which includes immediatelyreporting any concerns with respect to violation of a persons rights, actual and/or suspected abuse., • Upholdagencystandards for safety, confidentiality, and professionalism., • Generate monthly outcomereportsand other pertinent reports asrequested., • Other duties as assigned. QUALIFICATIONS • Bachelor's degree in Social Work, Psychology, Sociology, or related field., • At least 2 years of case management or advocacy with homeless or mentally ill populations., • Familiarity with DHS documentation and client databases (CHAMP/HMIS preferred)., • Strong organizational, communication, and crisis management skills., • Valid California drivers license and access to an insured vehicle. MANDATORY REQUIREMENTS • Employment Eligibility Verification, • Reliable transportation, • Updated tuberculosis test, • Successful completion of background screening

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance, • Training & development Job Responsibilities: • Task Management:, • Maintain an accurate daily task list (workflow dashboard) without overdue items., • Provide centralized operational support to the escrow officer, including:, • Reviewing commitment/prelim and seller/buyer information forms., • Ordering tax certificates, HOA certificates/statements, surveys, payoff statements, and lien releases., • Balancing files and preparing closing documents., • Handling any other assigned workflow dashboard tasks., • Document Evaluation:, • Evaluate and review real estate contracts and all supporting documents meticulously., • Manage files to ensure accuracy and completeness of documentation., • Compile and process escrow instruction packages., • Branch Collaboration:, • Collaborate with branch operations to prepare for closings. o Consistently communicate with Escrow Officers and local branches regarding file updates, changes, or issues., • Risk Assessment:, • Exercise sound judgment to identify discrepancies and assess risk levels, enabling informed decisions.To perform the job successfully, an individual should demonstrate the following competencies:, • Self-motivated - able to work independently with a sense of urgency in a fast-paced, high volume paperless environment., • People first approach - providing exceptional customer service to Escrow Officer, agents, and other appropriate parties throughout the transaction process., • Technical- ability to learn and navigate multiple software systems with a high level of competency., • Critical Thinking/Problem solving the individual identifies and resolves problems in a timely manner, gathers and analyzes information thoughtfully and maintains confidentiality., • Partnership/Collaboration the individual remains open to others' ideas and exhibits willingness to try new things., • Oral/Written Communication the individual speaks clearly and persuasively in positive or negative situations to clearly advise and resolve any issues., • Quality Assurance the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality., • Adaptability the individual adapts to changes in the work environment, prioritizes and manages competing demands, and can deal with frequent change, delays, or unexpected events while remaining resilient., • Building Collaborative Relationships the individual develops, maintains, and strengthens partnerships with agents and colleagues while providing information, assistance, and support.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Verification Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge phased arrays for satellites, spacecraft, and aerospace systems, we would like to hear from you.JOB DUTIES AND RESPONSIBILITIES • Contribute to the evaluation and technical implementation of FPGA and digital design simulation, verification and emulation infrastructure., • Contribute to the development, maintenance and phased deployment of continuous integration and regression testing infrastructure., • Develop state-of-the-art UVMf-based top-level and module-level testbenches using block-to-top best practices for reusability, including both control and data plane stimulation using VIP & System Verilog DPI-C integration with existing MATLAB and Python numerical models., • Lead the development of reusable custom VIP modules., • Work closely with the engineering and senior leadership teams to train and mentor engineers at all experience levels on UVMf testbench usage and modern approaches to FPGA/digital design. Work with the modeling and scientific staff to implement DPI-C dataplane verification interfaces into existing MATLAB and Python models., • Aid the Lead Verification Engineer in evaluating current processes regarding FPGA and digital design with a focus on Xilinx TLM models and QEMU-RP integration., • Work closely with vendors to define requirements of future simulation model deliverables., • Maintain up-to-date knowledge of industry best-practices regarding FPGA and digital design methodologies., • Work closely with the engineering leadership team to evaluate and non-disruptively implement process improvements.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A Bachelor of Science (BS) or Master of Science (MS) degree in Computer Science, Electrical Engineering, or Computer Engineering., • Minimum of 4 years of industry experience in verification and automation., • Deep knowledge of FPGA digital design verification techniques including VHDL, Verilog, SystemVerilog, C/C++, SystemC, UVM/UVMf, DPI-C, TLM, Formal CDC and functional analysis, QEMU and VIP., • Expert-level knowledge of digital design automation infrastructure, including CI, regression testing and HIL testing., • Competency with Linux., • Advanced-level knowledge of vendor-provided FPGA development tools with a focus on Xilinx tools., • Desire and ability to train and mentor while maintaining a positive and productive attitude.

Job DescriptionWe are actively seeking Caregivers for Santa MonicaOffice Location: Redondo Beach, CA Company: Senior Helpers of LA Beach Cities Position Type: Full-Time/Part-Time About Us: Senior Helpers of LA Beach Cities provides professional in-home care services to seniors, ensuring they live independently and safely in their own homes. We pride ourselves on delivering compassionate, quality care and are looking for dedicated caregivers to join our team. Job Description: We are actively seeking compassionate and reliable caregivers to provide exceptional care to our senior clients. As a caregiver, you will play a vital role in improving the quality of life for our clients by assisting with daily activities and providing emotional support. Key Responsibilities: • Assist clients with personal care needs such as bathing, dressing, grooming, and toileting., • Provide companionship and engage in meaningful conversations with clients., • Prepare meals and assist with feeding as necessary., • Perform light housekeeping tasks to maintain a clean and safe environment., • Assist with medication reminders and administration as directed., • Provide mobility assistance, including help with walking, transfers, and exercises., • Monitor and report any changes in the client's health or behavior to the appropriate supervisor., • Accompany clients to appointments and errands as needed., • Fluent English., • 21 years of age or older, • High school diploma or equivalent., • Prior experience in caregiving or related field preferred., • Certified Nursing Assistant (CNA) certification is a plus., • Ability to pass a background check and drug screening., • Strong communication and interpersonal skills., • Compassionate, patient, and reliable., • Ability to follow care plans and adapt to changing needs., • Competitive pay., • Flexible scheduling options., • Ongoing training and professional development opportunities., • Supportive and inclusive work environment. Join us in making a difference in the lives of seniors in our community. Your dedication and care can help our clients live their best lives in the comfort of their own homes. Apply today!

Job Description Job Location – El Segundo, CA Type - Contract (6 Months) Pay Rate – $63.00 - $119.00 Per Hour (W2 Only) With a commitment to innovation and excellence, we are looking for a dynamic Sr Product Program Manager, AI to join our team. The ideal candidate will oversee the planning, development, tracking, and enablement of our AI projects portfolio, ensuring alignment with our strategic objectives and delivering value to our business. You will provide thought leadership to establish the guidelines, optimize processes, and communicate AI strategy. What Your Impact Will Be: · Strategy & Stakeholder management o Align and manage organization wide AI product development. Measure and communicate business value delivered through various AI initiatives. o Collaborate with business units to understand their needs through ideation sessions, hackathons etc. and prioritize use cases to adopt AI technologies. o Lead insight gathering, ideation, and development into newer AI-powered business models, and successfully champion them through senior management and cross-functional teams for approval and endorsement. · Program Leadership: o Lead the end-to-end implementation of the Global AI system, ensuring alignment with business goals, timelines, and budgets. o Serve as the primary point of contact for all AI program-related activities. · Project Planning and Execution: o Develop detailed project plans, including scope, milestones, resource allocation, risk management, and contingency planning. · Risk and Issue Management: o Identify, assess, and mitigate risks and issues throughout the program's lifecycle. o Develop and implement corrective actions as needed to ensure project continuity. · Change Management: o Develop and execute a comprehensive change management strategy to facilitate user adoption and minimize disruption. o Provide training and support to end-users and stakeholders. • Budget and Resource Management: o Manage program budgets, ensuring cost efficiency and transparency. o Optimize resource utilization across project phases. What We’re Looking For: · Bachelor's degree in information technology, Computer Science, Business Administration, or related field. · [Preferred] Master's degree or relevant certifications (e.g., PMP, PRINCE2, or ITIL). · 10 – 15+ years of experience in IT program management, with a focus on SaaS Cloud implementations. · Proficiency in project management tools (e.g., MS Project, Jira, Trello). · Familiar with Jira and Jira Align and Agile Practices · Knowledge of regulatory compliance requirements related to AI systems. · Proven success in leading large-scale, complex AI projects, AI implementation. · Experience in building and scaling platforms and capabilities leveraging Generative and Agentic AI for Enterprises. · Significant understanding of use of AI in business domain including ML fundamentals and familiarity with algorithm work. · Proven leadership experience of developing products in a multidisciplinary cross-functional environment. · Possesses excellent interpersonal, problem solving and communication skills (written and verbal). · Demonstrated a growth mindset by staying curious and continuously learning, embracing challenges, and improving themselves.

Job DescriptionBellwether is a global advisory firm that helps businesses solve their most complex challenges and enhance enterprise value. We specialize in formulating and executing dynamic growth strategies through true partnership with our clients. Merging deep industry expertise, advanced analytical capabilities and best-in-class talent, we create value across the business lifecycle, from transaction management to operational transformation. Bellwether specializes in the management, analysis, and reporting of over $40 billion of AUM across a wide range of real estate related assets and corporate platforms in North America, Europe and Asia. Bellwether is privately held and has offices in Los Angeles, Newport Beach, Salt Lake City, London and Dallas. OverviewThe Debt Asset Management Team is responsible for the oversight of a portfolio of commercial real estate debt investments. The Associate, Debt will be responsible for supporting the asset management team in preserving and creating value in the existing portfolio. This role will work alongside the investment team in the origination, underwriting and execution of real estate debt related investment opportunities across various property types. The Associate, Debt will support the team by overseeing investments as the primary point of contact for the client, evaluate property performance and present well-reasoned and decisive recommendations to senior management, and provide oversight and mentorship to junior staff members to support an expanding Asset Management platform. The Associate, Debt will be a dynamic team player with a desire to lead junior members of the team and can succeed in a highly entrepreneurial environment. Key Responsibilities • Assist in the proactive monitoring and management of a portfolio of debt investments (US and non-US) across all property types (office, industrial, hotel, retail, & residential) and securitized products, serving as primary point for each loan assigned investments;, • Develop and maintain detailed asset-level cash flow reforecasting models;, • Manage the draw review process for assets that include construction or significant renovation/alteration projects, actively monitor the progress of the work against the budget and underwritten assumptions;, • Guide Analysts in the maintenance of detailed asset- and portfolio-reporting models to monitor the performance of investments at the asset level;, • Underwrite a variety of asset classes using Excel-based underwriting models, including complex cash flow, budget, IRR and fund/partnership waterfall modeling;, • Review and analyze business plans, leasing activity and monthly property-operating performance;, • Attend debt platform investment committee meetings and present findings to senior management;, • Perform property inspections;, • Track and highlight late payments and potential payoff and maturity date issues. Make recommendations for loan modifications and various other borrower requests;, • Market research and competitive analysis;, • Liaison with operating partners and leading members of the Acquisition Teams to review business plan execution; and, • Demonstrate strong leadership abilities and effective management skills, with a desire to manage, mentor, and develop team members. People Management Responsibilities:, • Involved with staff selection, interviewing and training as needed;, • Oversee the day-to-day workload and performance of direct reports, providing clear direction and support as needed to achieve work objectives;, • Ensure that direct reports understand their duties and delegated tasks;, • Monitor performance and development of direct reports and provide constructive and timely feedback and coaching;, • Work with direct reports to set individual goals and deadlines and conduct regular performance reviews aligned with performance review process; and, • Handle discipline of employees in accordance with company policy Professional Experience, • A minimum of 3 years’ relevant experience, • Asset Management, Development, or Acquisitions across major asset classes experience preferred; client-facing experience preferred, • Asset management experience, including development and analysis of real estate-based financial models with a focus on multifamily, office, and industrial assets;, • Asset management experience, including development and analysis of real estate-based financial models, underwriting, valuations and discounted cash flows, • Experience with property underwriting and advanced financial modeling;, • Ability to read and analyze Loan documents, lease and management agreements, • Proficiency in Microsoft Excel, PowerPoint and ARGUS Enterprise; and, • Familiarity with the leading commercial real estate market data resources (i.e. CoStar, Real Capital Analytics, etc.) a plus. Education/Certification, • Bachelor’s degree required, preferably in Business, Finance, Real Estate, Economics, or a related field of study.Essential Skills & Competencies, • Bellwether seeks to hire entrepreneurial individuals who are highly motivated, mature and intelligent, with demonstrated excellence in prior endeavors. The successful candidate should have:, • Job Knowledge & Technical Ability: Development and analysis of real estate-based financial models with a focus on multifamily, office, and industrial assets. Ability to build out a complex financial model from scratch including waterfalls and various debt structures. Ability to read and analyze investment, lease, and management agreements., • Initiative & Dependability: Ability to perform responsibilities independently and proactively, solve problems, and improve processes and/or services. Self-directed, takes initiative and responsibility, ensures completion of tasks., • Communication: Excellent verbal and written communication skills; strong listening and interpersonal skills. Highly effective at preparing and presenting information., • Professionalism & Teamwork: Acts with honesty and integrity and maintains confidentiality, adheres to company policies. Promotes a collaborative and productive work environment. Demonstrates team building, support and respect. Travel Requirements, • Local and/or nationwide travel to assets and client sites required on an as-needed basis, approximately 1-2 times per month depending on deal list. Position Details, • Classification: Exempt, • Position Status: Regular, Full Time, • Reports To: Vice President, Senior Vice President or Managing Director, • Direct Reports: YesPhysical and Mental Demands, • While performing the duties of this job, the employee is regularly required to stand, sit, and walk. Must be able to sit at an office workstation for an extended period of time. May need to reach, stoop, or kneel to access items., • Must be able to talk, hear and use wrists, hands and/or fingers frequently and repetitively to operate a computer, telephone and other office productivity machinery., • Must frequently prepare or inspect documents, and convey details or important instructions or ideas accurately, loudly, or quickly., • Ability to work independently, and prioritize duties to ensure timely completion. The ability to collaborate is also imperative., • Requires active listening, critical thinking, making decisions, time management, as well as administration skills., • Ability to interact in a courteous professional manner at all times., • Regular, predictable attendance is required., • The physical and mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions.Work Environment, • No hazardous or significantly unpleasant conditions (such as in a typical office)., • Moderate noise (i.e., business office with computers, phones, printers and light traffic), • Indoor business office environment with windows; light foot traffic within work areas, • The work environment characteristics described here are representative of those a teammate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Benefits, • We offer a comprehensive benefits package that includes:, • Employer-paid Medical, Dental & Vision, with buy-up options available, • Flexible Spending Account, Health Savings Account, • Carrot Fertility Benefit - $10,000 lifetime benefit, • 401k company match 4%, immediately vested, • Generous PTO, 11 Paid Company Holidays & Paid Holiday Office Closure, • 14 weeks Maternity Leave & 12 weeks Parental Leave, • Wellbeing program offerings, • Cell phone reimbursement

Job DescriptionSalary: Location: Inglewood, CA About 7th Avenue 7th Avenue is a modern furniture brand that combines elevated, contemporary aesthetics with functional day-to-day features. Our flagship product, "The World's Greatest Modular Sofa", features endless modularity, water-repellent and stain-resistant fabrics, removable and machine-washable covers, adjustable back cushion firmness, memory foam blend cushions, soft-close hidden storage, and more. All products are sustainably-built, free from harmful chemicals via OEKO-TEX and GreenGuard Gold-certified fabrics, and devoid of flame-retardants and formaldehyde. The frames are incredibly durable and built to last 10 years or more. Key Responsibilities • Lead and oversee all manufacturing operations, including vendor sourcing, supplier management, and domestic production execution, • Own end-to-end manufacturing setup including team hiring, equipment procurement, and technology infrastructure buildout to ensure seamless operational launch, • Identify, evaluate, and establish relationships with new vendors and suppliers to support scaling production needs, • Partner closely with external designers to translate product concepts into manufacturable, cost-effective solutions, • Oversee domestic production processes end-to-end, ensuring timelines, quality standards, and cost targets are consistently met, • Develop and implement manufacturing strategies, SOPs, and production workflows as the company scales, • Negotiate pricing, lead times, and contracts with vendors and suppliers to optimize margins and operational efficiency, • Monitor supplier performance, ensuring quality, reliability, and compliance with company standards, • Collaborate with operations, logistics, and inventory teams to ensure seamless material flow and production scheduling, • Establish KPIs and performance metrics across manufacturing and supplier networks, • Identify and resolve production bottlenecks, quality issues, and operational inefficiencies, • Build, lead, and mentor a high-performing manufacturing and production team, • Provide regular reporting to senior leadership on manufacturing performance, risks, and opportunities Qualifications & Requirements • 10+ years of experience in manufacturing, sourcing, or production leadership roles, • Experience in automated manufacturing processes, systems, and hardware, • Proven experience managing vendors and suppliers, including sourcing, negotiation, and performance management, • Strong background in domestic production environments, preferably within furniture, consumer goods, or similar industries, • Demonstrated ability to work cross-functionally with design, operations, and supply chain teams, • Experience building and scaling manufacturing processes in a fast-paced environment, • Strong operational mindset with the ability to balance quality, speed, and cost, • Excellent negotiation, communication, and leadership skills, • Hands-on approach with the ability to dive into both strategic and tactical execution, • Proficiency with ERP systems such as NetSuite and standard productivity tools Preferred Qualifications • Experience in furniture manufacturing, upholstery, or woodworking, • Background in lean manufacturing, continuous improvement, or 5S methodologies, • Experience establishing domestic manufacturing networks in the United States, • Prior experience in a high-growth or startup environment Job Type: Full-time Pay: $DOE Benefits: • Dental insurance, • Health insurance, • Paid time off, • Vision insurance, • Company 401(k) Schedule: • Monday to Friday

Job DescriptionSpacecraft Flight Computing EngineerThe Opportunity We are supporting a well-funded space company developing a human-rated spacecraft with real flight hardware, real missions, and real technical ownership. This role sits on a small, elite Flight Computing team responsible for the design and implementation of the spacecraft’s computing architecture — from custom flight computers through operating systems, low-level software, and fault-tolerant behavior. This is not a traditional flight software role layered on top of vendor avionics. The team designs the computers, defines the operating environment, and owns how the system behaves under real-world faults. You would work directly with the engineer who architected the fault-tolerant computing and networking systems for Falcon 9 and Dragon, including the hardware that interfaces with the International Space Station. What You’ll Work On * Designing and implementing spacecraft flight computing systems with full hardware/software ownership * Developing and tuning low-level software across bootloaders, operating systems, and device drivers * Building fault-tolerant behavior that allows systems to continue operating through anomalies * Working closely with custom flight computer hardware designed in-house * Defining how compute, timing, and networking behave across spacecraft subsystems * Participating in system bring-up, integration, debugging, and mission support * Collaborating with a small group of highly capable engineers who value first-principles design What We’re Looking For We are open to exceptional engineers at multiple experience levels, provided they have strong fundamentals and real technical depth. Strong indicators include: * Deep experience with C/C++ in low-level or systems contexts * Background in embedded systems, firmware, kernel-level Linux, or RTOS-based development * Comfort working close to hardware (bring-up, debugging, timing, fault analysis) * Experience designing or supporting real-time or safety-critical systems * Engineers who build things because they’re curious — not just because it’s assigned Prior spacecraft experience is not required. Engineers from adjacent domains (embedded systems, automotive safety, robotics, compute infrastructure, etc.) are welcome if they bring the right depth and mindset. What Makes This Different * Small, senior technical team — no large hierarchies, no busywork * Minimal legacy code — engineers are empowered to fix or redesign what doesn’t make sense * Modern, high-performance compute platforms, not legacy aerospace hardware * Real authority over architecture and implementation decisions * Direct mentorship and collaboration with one of the most experienced flight computing architects in the industry * A rare blend of startup-level autonomy with the resources of a major space program Location & Eligibility * Based in the South Bay / Greater Los Angeles area * Candidates must be U.S. persons due to regulatory requirements * Relocation support may be available Interested? If you’re excited by the idea of building spacecraft computers the right way — with real ownership, real impact, and real technical peers — we’d welcome a conversation.

Job Description SENIOR ACCOUNT MANAGER Position Summary: DSA Signage is seeking a dynamic and results-driven Senior Account Manager to join our growing sales team. The ideal candidate will be responsible for managing inbound and outbound sales activities, nurturing qualified leads, and closing business opportunities that drive revenue growth. This individual will be at the front line of our customer engagement strategy, understanding client needs, positioning our solutions, and building long-term relationships. The position will also be responsible for managing some of DSA’s existing accounts. This is an exciting opportunity for someone who thrives in a fast-paced environment, loves the challenge of achieving targets, and is passionate about cultivating relationships. Key Responsibilities: • Prospect, qualify, and close sales opportunities through inbound lead follow-up, outbound calls, emails, and virtual meetings., • Develop a strong understanding of the company’s products, services, and value proposition to effectively communicate solutions to potential clients., • Work closely with engineering and supply chain teams to understand the product and lead times associated with them., • Manage the full sales cycle from lead generation to deal closure ensuring a seamless customer experience., • Maintain accurate records of all sales activities and pipeline data in the CRM system (e.g., Salesforce, HubSpot, etc.)., • Collaborate with the marketing team to refine lead generation strategies and campaigns., • Partner with account managers and customer success teams to ensure smooth client onboarding and satisfaction., • Meet or exceed monthly and quarterly sales targets and key performance indicators (KPIs)., • 5 + years of proven inside sales or business development experience, preferably in a B2B environment., • This is a full-time in office position with 20% travel requirements., • Demonstrated success meeting or exceeding sales quotas., • Strong communication, presentation, and negotiation skills., • Proficiency in CRM and sales automation tools (Salesforce, HubSpot, Zoho, etc.)., • Excellent organizational skills with the ability to manage multiple priorities., • Experience with solution or consultative selling approaches, • Knowledge of signage or other store fixtures in the retail or hospitality is strongly desired., • Comfortable conducting product demos and presenting to clients remotely and in person., • Excellent verbal and written communication

Job DescriptionDescriptionImpulse is developing a variety of liquid propulsion systems and looking for design engineers who will contribute to critical development projects. As a Sr. Propulsion Design Engineer, you will own all aspects of propulsion system layout of a high-performance spacecraft, from concept to product realization, while working with a fast-paced, agile team. Responsibilities • Layout complex and highly integrated fluid and mechanical systems, • Own all aspects of component design from concept to product realization, • Generate detailed CAD models and manufacturing drawings, • Perform fluid, thermal, and structural analysis as required, • Work with internal and external sources to procure materials, fabricate parts, and complete assemblies, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in engineering or related field, • 5+ years of experience with flight propulsion components including high-pressure, and high-performance applications, • 5+ years of hands-on experience working with fluid, electrical and mechanical systems, • Proficiency in creating engineering drawings and 3D CAD models with GD&T (ASME Y14.5), • Experience designing and delivering high reliability, high performance hardware, • Experience with in-space propulsion components, • Experience with Siemens NX, • Strong project management skills and effective communication of technical concepts across multi-disciplinary teams, • Experience in a startup or agile development environment Additional Requirement Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionBenefits: • Bonus based on performance, • Employee discounts Job Summary We are seeking a passionate and experienced Senior Dog Groomer to elevate our pet grooming services to new heights! In this dynamic role, you will lead grooming sessions, ensuring each dog receives personalized care, expert grooming, and a positive experience. Your expertise will help maintain our reputation for exceptional pet care, while fostering a welcoming environment for both pets and their owners. This position offers an exciting opportunity to showcase your grooming talents and animal handling skills in a vibrant, pet-loving community. Duties • Perform professional grooming services including bathing, trimming, styling, and finishing for dogs of all breeds and sizes., • Lead grooming sessions with confidence, ensuring safety and comfort for each pet through proper animal restraint and handling techniques., • Provide pet care advice to owners regarding grooming routines, coat maintenance, and overall health considerations., • Maintain a clean and organized in all grooming areas and adhering to sanitation standards and safety protocols at all times., • Assist with dog training and behavioral assessments to ensure cooperative grooming experiences., • Address health concerns or special needs of pets., • Support team members by sharing expertise in grooming, animal handling, or kennel experience as needed.Skills, • Extensive dog handling skills with the ability to manage animals safely and compassionately., • Proven 2yrs experience in pet grooming, including breed-specific cuts and styling techniques., • Strong animal restraint skills combined with animal care knowledge to ensure safety during grooming., • Ability to perform heavy lifting when necessary, based on weight of the dog., • Excellent customer service skills to communicate effectively with pet owners and address their concerns professionally., • Familiarity with pet sitting, pet care routines, and kennel experience enhances your ability to provide comprehensive care.Why Woof Gang Bakery and Grooming? At Woof Gang Bakery and Grooming, we love what we do. Our furry friends mean the world to us. Passion and care for animals are at the core of everything we do. Grooming with love since 2007, we take the stress out of grooming and put love into it. We believe in offering our pets a personalized grooming experience with the love and care they deserve to help them look their very best! We carry the best pet food, and our bakery treats are made fresh with natural ingredients, free from artificial colors, flavors, and preservatives. We are a locally owned, neighborhood, leading pet retail and grooming franchise system with more than 300 locations open or under development across the United States. The Woof Gang Bakery and Grooming promise: • We are committed to the happiness, health, and well-being of pets. And also, how they look!, • The well-being and safety of our pets is our top priority., • We care for our furry friends as if they were our own., • We bring joy and kindness to all pets and parents who enter our stores., • We take the stress out of grooming and put love into it., • We believe that everyone deserves a treat.Job Types: Part-time, Full-time Compensation • Base hourly rate of $22-$27/hour., • You keep 100% of your tips, • 50% Commissions on Spa upgrades, • Total yearly compensation can range between $45,000up to $95,000!Benefits:, • Tips and Commissions, • Fixed or flexible schedule, • Paid time off, • Employee DiscountWork Location: In person Benefits: • Employee discount, • Paid time off, • Paid trainingWork Location: In person

Job Description About Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: This is an exciting role in a growing company. This position plays a key role in verifying that materials, components, assemblies, and final products comply with defense industry standards, AS9100 requirements, and design specifications. The Senior Quality Inspector works closely with production, engineering, and supply chain teams to maintain the highest levels of product quality and customer satisfaction. Responsibilities: • Performs and leads receiving, in-process, and final inspections of mechanical, electrical, and electronic components, subassemblies, and finished goods., • Verify conformance to engineering drawings, specifications, IPC-A-610/620 standards, and contractual specifications., • Document inspection results accurately and maintain traceable records in accordance with QMS procedures and AS9100 requirements., • Identify and document nonconformances; provide recommendations to support root cause analysis and corrective/preventive action implementation., • Support and perform first article inspections (FAIs) per internal and AS9102 requirements., • Coordinate inspections to meet stakeholder needs and due dates based on priority., • Collaborate with manufacturing, warehouse, and engineering to resolve quality issues and improve processes., • Maintain calibration of inspection tools and ensure proper use of measurement equipment., • Participate in internal audits, continuous improvement projects, and customer source inspections as required., • Provide technical mentorship and on-the-job training to new and junior inspectors, support standardization and best practices. Basic Qualifications:, • High school diploma or GED required; additional technical training or certification in quality inspection or metrology preferred., • Minimum of 2 years of experience in manufacturing or defense/aerospace inspection or similar role with an Associate's degree or higher (or 4 years of relevant experience without an Associate's degree)., • Solid understanding of mechanical and/or electrical inspection techniques., • Strong ability to read and interpret engineering drawings, GD&T, and specifications., • Proficiency using standard inspection equipment (micrometers, calipers, height gauges, CMMs, optical comparators, etc.)., • Working knowledge of AS9100, ISO 9001, MIL-SPEC and IPC-610/620 requirements., • Proficiency with Microsoft Office and basic quality data entry systems. Preferred Skills and Experience:, • Associate degree or certification in Quality Assurance, Mechanical Engineering Technology, or related field., • Experience performing AS9102 First Article Inspections., • Working knowledge of coordinate measuring machines (CMM) or 3D scanning equipment., • Certification or training to IPC-A-610/620 and/or J-STD-001., • Experience in defense, aerospace, or other highly regulated manufacturing environments., • Knowledge of lean manufacturing and continuous improvement principles., • Effective communication and teamwork skills across multiple departments. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. At Epirus, you'll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, "impossible" is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. Join us and rewrite the rules. As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $23.22—$30.43 USD

Job DescriptionDescriptionAs a Senior RF Test Engineer, your core responsibility will be to own RF test strategy for all wireless products at Impulse, define the roadmap for future test needs, and drive cross-team alignment. You will work with RF engineers, RF software engineers, mechanical engineers, and others to meet test needs across a wide range of capabilities. You will work on uplink and downlink radios up to 32GHz, GNSS receivers, desense testing, antennas, and coexistence testing. Responsibilities • Work with a cross-disciplinary team to define and implement RF test requirements, implement RF test software architecture, and design and build RF test hardware fixtures., • Design RF acceptance criteria for flight readiness, • Implement scripts to control RF test equipment including spectrum analyzers, network analyzers, antenna test infrastructure, power meters, power supplies, and other devices., • Design and implement fixtures to test design compatibility with GNSS constellations and ground station infrastructure, • Work with hardware and software engineers to prepare testing for radiation and ground station test programs, • Generate key performance indicator matrices to plan testing for RF products, • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related technical field, • Experience writing automation scripts for RF hardware test, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, network analyzers, GNSS simulators, and software defined radios, • Proficient in testing and troubleshooting RF devices, • 5+ years writing Python, LabView, TILE, or other test software, • Strong understanding of RF system parameters such as channel power, EVM, modulation, Es/N0, C/N0, and bandwidth, • Experience writing and documenting RF test procedures for use by other engineers and technicians, • Familiarity working with embedded Linux, • Strong software debugging skills, • Experience testing and troubleshooting microcontrollers and/or FPGA's, • Experience with common RF protocols like SRS4, DVBS-II, and CCSDS, • Analysis or test experience for electronics performance in radiation environments, • Experience with GNU radio flowgraph development and troubleshooting, • Experience implementing RF transmitter and receiver algorithms, • Familiarity with satellite spectrum licensing laws, agencies, and standards, • Experience testing RF devices for regulatory compliance, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Paid time off Location: Torrance, CA Employment Type: Full-time, Exempt Salary: $75,000 $80,000 (DOE) About the Role We are seeking a Service Manager to lead and oversee our Service Department. This role combines hands-on technical knowledge with operational leadership, requiring a professional who can effectively guide technicians while ensuring efficient and high-quality service operations. The ideal candidate will have a strong understanding of service work at a practical level and the ability to manage both technical and administrative responsibilities. Key Responsibilities Technical Leadership • Provide technical guidance and oversight to service technicians in machine cleaning, maintenance, and troubleshooting, • Maintain sufficient hands-on knowledge to support, coach, and evaluate technician performance, • Participate in hands-on work when necessary to support operations, training, or issue resolution, • Ensure adherence to standardized service procedures and quality standards, • Assist in resolving escalated technical issues in collaboration with senior technicians or specialists, • Promote continuous improvement in technical skills and service consistency across the teamService Operations Management Team Management • Supervise service technicians nationwide, ensuring productivity, accountability, and adherence to company standards, • Conduct performance evaluations and provide coaching and development support, • Maintain professionalism, discipline, and team moraleAdministrative Oversight, • Oversee scheduling, timekeeping, and compliance with company policies, • Ensure accurate documentation and reporting of service activitiesCross-Functional Collaboration, • Coordinate with Sales Operations and other departments to align service with business objectives, • Facilitate effective communication across teamsCustomer and Service Quality, • Handle escalated customer concerns professionally and ensure timely resolution, • Maintain high standards of service quality and customer satisfactionOperational Improvement, • Identify opportunities to improve efficiency, workflow, and service delivery, • Support implementation of operational strategies and process improvementsVendor Coordination, • Manage vendor relationships and ensure service-related resources meet operational needsQualifications Required • Japanese-English bilingual required to communicate with clients and internal teams, • Experience in technical service, maintenance, or equipment-related environments, • Working knowledge of machine cleaning, maintenance, or troubleshooting, • Ability to guide, coach, and evaluate technical staff, • Strong communication and collaboration skills, • Ability to manage both technical and administrative responsibilitiesPreferred, • Japanese, Spanish, and English trilingual skills, • Prior supervisory or leadership experience in a technical environment, • Bachelor's degree or equivalent experienceBenefits, • Health, Dental, and Vision Insurance, • Paid Time Off (PTO), • Paid HolidaysWork Schedule, • Monday to Friday, • 8:30 AM 5:30 PM or 9:00 AM 6:00 PMWork Environment, • Work is performed in a technical service environment with moderate noise levels, • Exposure to service equipment, cleaning tanks, and operational machinery, • Involves handling cleaning agents and chemicals in accordance with safety protocols, • Requires physical activity including standing, walking, and occasional lifting, • May involve working around material handling equipment such as forkliftsAdditional Information This role is not purely administrative and does not require a master technician level. The Service Manager is expected to have sufficient practical experience to lead effectively while leveraging the expertise of technicians and specialists as needed. For this position, please contact Satomi Honda: (213) 448-7822

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose This role serves as the technical bridge between design/manufacturing engineers and the production team, with a core focus on developing scalable, high-reliability automated, machining, & inspection processes. This person is responsible for driving process improvements, solving complex production challenges, and helping to eliminate part flow blockers. Rather than simply supporting products, this engineer leads process innovation enabling rapid iteration, increasing production efficiency, and helping scale Divergent's capabilities to meet program demands. The Role As the Senior Advance Manufacturing engineer, you will lead the development, execution, and continuous improvement of day-to-day operations for machining, automated assembly, automated anodize, inspection, & cleaning work centers. You'll be one of the primary technical resources supporting these areas with troubleshooting production issues, refining the processes, and enabling scalability through smart programming, tooling/fixturing, documentation, and workflow improvements. This role is hands-on, fast-paced, and essential to delivering high-precision, high-reliability hardware across automotive, aerospace, and defense programs. The ideal candidate is well versed in aerospace production environment and has direct experience with supporting the production floor, DFM, machining, assembly, coating, metrology, & thrives on solving complex shop floor problems, and brings a strong process mindset to drive quality, speed, and consistency. Key Responsibilities Operations Support • Own daily production execution, working directly with production floor to resolve issues, and ensure steady throughput., • Develop and implement best practices, processes, strategies, and calibration procedures to improve operational capacity., • Act as the technical bridge between design/manufacturing engineering and production teams., • Lead development, execution, and continuous improvement of machining, automated assembly, automated anodize, inspection, and cleaning work centers., • Collaborate on programming for 3-axis, 3+2, and 5-axis CNC mills using Siemens NX CAM software., • Provide feedback using advanced understanding of GD&T, tooling, feeds/speeds, and fixturing., • Introduce standardized strategies, programming conventions, and setup documentation to improve consistency and reduce cycle time., • Help lead efforts to integrate new machines, equipment, tools, and fixturing into production; support commissioning., • Co-Drive design-for-manufacturing (DFM) conversations with Manufacturing engineering to improve part manufacturability and reduce complexity at the machine., • Develop and implement innovative fixturing strategies tailored for complex additive manufactured geometries., • Analyze data to identify trends, inefficiencies, and root causes of scrap or delays; implement corrective actions and process improvements., • Create and maintain detailed documentation to ensure consistency and repeatability across shifts and teams., • Collaborate with software and data teams to integrate production metrics and feedback loops into real-time dashboards and planning systems. Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent hands-on experience, • 8+ years of experience in aerospace or defense industries., • Hands-on experience with advanced manufacturing techniques, including additive manufacturing, robotics, coatings, & inspection/quality, • Direct experience with machining, additive manufacturing, coatings, & inspection/quality., • Proficiency in CAD/CAM software (e.g., Siemens NX, AutoCAD,), • Advanced knowledge of CNC machining, structure assembly, GD&T, tooling, & metrology., • Experience evaluating, selecting and commissioning of machines to meet manufacturing capabilities., • Excellent problem-solving skills and ability to innovate in a fast-paced environment., • Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams., • Ability to work on multiple projects and initiatives in parallel Preferred Qualifications, • Master's degree in mechanical, manufacturing, or aerospace engineering., • Experience with robotic machining systems and calibration methodologies, • Experience with manufacturing automation in automotive or aerospace environments Work Environment, • This is a hands-on position that will require standing for long durations of your day and working directly with hardware on the floor., • Must be comfortable stooping, bending, and standing., • Position may require occasional travel, long hours or weekend work. Compensation, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionDescription: THE COMPANY Cogir Senior Living, based in Scottsdale, Arizona, proudly oversees a network of senior living communities spanning 11 states nationwide. As a trusted leader in senior housing, we are dedicated to growth while maintaining our commitment to exceptional care for our residents and a supportive, growth-focused environment for our team members. At Cogir, our culture is rooted in the core values of human focus, creativity, and excellence, which inspire us to continuously improve and achieve excellence in all we do. Join us in our mission to enrich the lives of our residents while building a meaningful and fulfilling career! WHAT WE OFFER • Competitive wages, training, and growth opportunities., • Early access to paycheck (pay on demand)., • Health, Dental, Vision, and Life Insurance., • Paid Vacation, Holidays, and Sick Leave., • 401K with company match., • Free meals at work., • Employee Assistance Program. Our Care Partners play a critical role in their community. You will provide compassionate and personalized direct care to our residents, assisting them with activities of daily living and ensuring their comfort, safety, and well-being while promoting independence, maintaining their privacy, and respecting their dignity. Our Care Partners work in a team setting to ensure a supportive and nurturing environment for our residents. KEY RESPONSIBILITIES • Assist residents with activities of daily living, such as bathing, dressing, grooming, toileting, and transferring, as needed, while adhering to community protocols, licensing regulations, and guidelines for resident and employee safety., • Prioritize independence and emotional support for the residents by providing compassionate care, engagement, and companionship., • Encourage and assist with participation in life enrichment activity programs., • Assist with light housekeeping duties, such as making beds, tidying rooms, etc., • Promote open communication between healthcare professionals, families, residents, and staff. Requirements: CANDIDATE QUALIFICATIONS Education: • High School Diploma or equivalent., • Caregiver training is a plus., • At least 12 months of experience in a professional caregiving setting., • Experience with memory care is preferred (for Memory Care communities)., • Strong communication skills and a teamwork mindset., • Positive attitude, empathy, patience, and commitment to treating our residents with dignity and respect., • Attention to detail, physical stamina, and high integrity. Tue - Saturday 7:00AM - 11:00AM

Job DescriptionSalary: $120K - 150K This is a hybrid position that requires residency in California, even during remote work periods. About the company: Located in Redondo Beach, CA, GungHo Online Entertainment America Inc. is the U.S. subsidiary of the Japanese game company GungHo Online Entertainment, Inc. Publishing titles across multiple platforms ranging from console to handheld and mobile, our group is comprised of veterans from various aspects of the industry brought together by one simple thing: a love of gaming. Position Summary: This position is responsible for architecting, and implementing medium to large features for our internally developed games. The role is also potentially responsible for managing and mentoring other software engineers. The position is also partially responsible for the overall productivity and growth of the Development Department. What youll be doing: Architect and implement medium to large features for our games using Unreal • Make sure that features are implemented to support the designed goal, with sufficient room to change and grow., • Make sure that features are also implemented correctly internally., • Ensure efficient and timely implementation., • Be able to ask questions when necessary, and fill in the gaps when given partial designs and specs., • Recommend solutions and approve schedules for development projects., • Supervise and participate in all aspects of internal and external projects (e.g. staffing, technology, tools, etc.)., • Manage employees working in the department and their workloads., • Responsible for the performance management of direct reports., • Conduct phone and in-person interviews and evaluate the technical skill set of potential candidates., • Attend industry conferences for networking and information gathering purposes., • Meet with Third Party vendors to evaluate external tools and services., • Perform special projects and other miscellaneous duties that are assigned by upper management., • Travel on business or works beyond normal work hours when necessary. Qualifications / desired experience: • Bachelors degree (or equivalent) in Computer Science or related technical discipline, • 7+ years of video game development and product delivery experience, • In depth knowledge of C++., • In depth Knowledge of Unreal engine is plus., • Fluency in 3D graphics and shader programming., • Understanding of memory management., • Strong communication skills., • Desire to learn and to grow., • Ability to work with small, agile team environments., • Must have a passion for making fun, highly playable games! Why you want to work here: At GungHo, were enthusiastic about creating fun games and were always looking for talented individuals with whom we can share our passion. We have a highly collaborative culture where everyone wants to work together to get things done! Perks: • 100% employer-paid insurances: Health Insurance (PPO Medical, Dental, and Vision), Life Insurance, Accidental Death and Dismemberment insurance, and Long Term Disability Insurance, • 401(k) with employer match, • Competitive paid time off: Vacation, Personal time, Sick Leave, Holidays, and Winter Breaks., • An incentive may be provided based on business performance. Business Hours:10:00 AM - 7:00 PM in Pacific Time Salary Range:$120,000 - $150,000 per year (DOE) Note:Only applications submitted through the online system or formally referred by the designated recruiter will be deemed official and accepted. Any resumes submitted through alternative channels will not be recognized as valid applications.

Job DescriptionDescription: THE COMPANY Cogir Senior Living, based in Scottsdale, Arizona, proudly oversees a network of senior living communities spanning 11 states nationwide. As a trusted leader in senior housing, we are dedicated to growth while maintaining our commitment to exceptional care for our residents and a supportive, growth-focused environment for our team members. At Cogir, our culture is rooted in the core values of human focus, creativity, and excellence, which inspire us to continuously improve and achieve excellence in all we do. Join us in our mission to enrich the lives of our residents while building a meaningful and fulfilling career! WHAT WE OFFER • Competitive wages, training, and growth opportunities., • Early access to paycheck (pay on demand)., • Health, Dental, Vision, and Life Insurance., • Paid Vacation, Holidays, and Sick Leave., • 401K with company match., • Free meals at work., • Employee Assistance Program. Our Care Partners play a critical role in their community. You will provide compassionate and personalized direct care to our residents, assisting them with activities of daily living and ensuring their comfort, safety, and well-being while promoting independence, maintaining their privacy, and respecting their dignity. Our Care Partners work in a team setting to ensure a supportive and nurturing environment for our residents. KEY RESPONSIBILITIES • Assist residents with activities of daily living, such as bathing, dressing, grooming, toileting, and transferring, as needed, while adhering to community protocols, licensing regulations, and guidelines for resident and employee safety., • Prioritize independence and emotional support for the residents by providing compassionate care, engagement, and companionship., • Encourage and assist with participation in life enrichment activity programs., • Assist with light housekeeping duties, such as making beds, tidying rooms, etc., • Promote open communication between healthcare professionals, families, residents, and staff. Requirements: CANDIDATE QUALIFICATIONS Education: • High School Diploma or equivalent., • Caregiver training is a plus., • At least 12 months of experience in a professional caregiving setting., • Experience with memory care is preferred (for Memory Care communities)., • Strong communication skills and a teamwork mindset., • Positive attitude, empathy, patience, and commitment to treating our residents with dignity and respect., • Attention to detail, physical stamina, and high integrity., • Willingness to participate in weekend rotation.

Job DescriptionDescriptionAs a Senior Recruiter at Impulse Space, you will collaborate closely with hiring managers to drive the full life-cycle recruiting process, encompassing sourcing, screening, interviewing, extending offers, and ensuring a positive candidate experience. Operating across diverse roles within the Engineering and Operations teams, you will be a key player in our hiring strategy. We are seeking an individual who is not only highly engaged and takes pride in their work but also thrives in our startup environment. Independence and ownership are key facets of success in this role. Responsibilities • Manage full cycle recruiting for multiple, complex searches, creating innovative sourcing strategies and engagement to bring the best talent to each role, • Collaborate closely with hiring managers throughout the recruiting process to ensure we meet their hiring needs and goals, • Regularly manage pipeline activity and maintain data integrity, and proactively share data-centric updates with internal stakeholders, • Foster a collaborative team environment and a strong service-oriented culture, which ensures delivery of an efficient, effective, quality driven services to internal hiring teams, • Focus on process development & metrics/analytics - helping Impulse continually raise the recruiting bar Minimum Qualifications • 6+ years’ experience in full life cycle technical recruiting, • Experience recruiting for hardware engineering roles (Mechanical, Test, Production, etc.), • Demonstrated ability to identify, source, and hire exceptional engineering talent, • Ability to build strong relationships with both managers and candidates, • Knowledge of various recruiting tools such as applicant tracking systems, social media platforms, Boolean searches etc., • Demonstrated knowledge of employment classifications, • Bachelor’s degree highly preferred, • 8+ years' experience recruiting in aerospace, or hardware engineering related field, • Knowledge of technical markets across the U.S., • Experience in a startup or agile development environment, • Knowledge of engineering skillsets in software, hardware, manufacturing, operations, • Experience with high volume recruitingAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Position Summary: K1 is seeking a Private Equity Analyst to join the expanding Investment team for our office located in Manhattan Beach, CA. We are seeking a candidate with strong analytical and communication skills, the capacity to multi-task and the ability to work as part of a team. The ideal candidate will be inquisitive and highly motivated, display initiative, work well under the direction of others and possess the ability to perform at a high level under pressure. The candidate will also be disciplined and of high integrity, adhering to K1’s core values of Passion, Persistence, Humility and Excellence. K1’s proprietary internal development program trains powerful investment professionals directly out of school or laterally from non-traditional backgrounds, giving applicants the opportunity to enter Private Equity without having to start in Investment Banking. Key Responsibilities: • As a private equity analyst, you will be the tip of the spear, leading our efforts to evaluate new investments and identify key investment levers to drive value creation initiatives post-close, • You will be meeting with senior executive team members, founder/CEOs, and third-party advisors as part of your day-to-day - representing K1 and developing your career as a software investor, • Your day-to-day will also include building dynamic financial models, running proprietary analyses, and reviewing company provided materials as part of cross-functional deal teams, • You will present potential investments to K1’s Investment Committee alongside deal team members, • You will collaborate with finance teams at portfolio companies to create quarterly and annual budgets, • You will coordinate data collection and diligence sessions with co-investors, lenders and other financing sources for potential future capital needs, • You will work collaboratively with deal teams, finance, accounting, legal and operations teams at K1 Requirements: • Bachelor's Degree - first generation college students are encouraged to apply, • You have a strong academic career, regardless of subject matter, • You are adaptable, results-oriented, and have an ability to manage multiple projects simultaneously, • You have excellent analytical, strategic, and implementation skills, • You are proactive and high-energy with a hands-on approach to problem solving, • You have an uncompromising attention to detail, work quality, ethics and integrity, • You adhere to K1’s core values Perks: • Unlimited PTO, plus holidays, • 401(k) plans & Profit sharing, • Volunteer opportunities and intramural K1 sports teams, • Onsite catering with lunch served daily, • Company and team wide outings, • Electric vehicle reimbursement About K1: K1 is one of the largest investors in small-cap AI-powered software. Dedicated to transforming lives and industries by building category leaders in technology, K1 has invested in over 275 companies since inception. Headquartered in Manhattan Beach, California, the firm partners early with founders and management teams to build AI-powered, mission-critical systems of record for enterprise clients globally. For more information, visit k1.com and follow K1 Investment Management on LinkedIn As of the date of this posting, K1 Investment Management, LLC reasonably expects to pay $95,000 plus benefits and a competitive bonus for the position of Private Equity Analyst. #LI-Onsite Powered by JazzHR S3Yf8Vck80

Job Description Reolink, a leader in intelligent visual technology for homes and businesses, was founded in 2009 by a group of engineers with a strong commitment to and passion for smarter security solutions. Our products are now trusted by millions of users across more than 110 countries and regions worldwide. Building on this trust, we continue expanding our presence and bringing our innovations to more markets around the globe. Reolink remains committed to delivering advanced, reliable, and user‑centric solutions that empower people to protect what matters most. Focus Strategic negotiation, high-level buyer relationships, and portfolio steering. Position Summary We are seeking a high-caliber Senior Sales Manager to lead Reolink's expansion across major US retail landscapes. You will serve as the primary strategic architect for our retail presence, driving high-level negotiations and securing prime shelf placement. Key Responsibilities: -Strategic Account Acquisition: Identify and penetrate untapped Tier-1 retail channels; lead the end-to-end process from initial pitch to "vendor of record" status. -Top-Level Negotiation: Direct annual Joint Business Planning (JBP) and line reviews with senior buyers to optimize SKU assortments and promotional calendars. -P&L & Margin Management: Full accountability for account profitability, managing MDF (Marketing Development Funds), RTV (Return to Vendor) rates, and backend rebates. -Portfolio Strategy: Influence the product roadmap by providing market intelligence on competitor movements (e.g., Ring, Arlo, Nest) and consumer trends in the smart home security sector. -Cross-Functional Leadership: Collaborate with Marketing and Supply Chain teams to ensure seamless execution of nationwide product launches and seasonal resets. Requirements: -10+ years of experience in Retail Business Development or Key Account Management within the US Consumer Electronics or Smart Home industry. -Proven track record of managing multi-million USD accounts at Home Depot, Best Buy, or Walmart. -Extensive network of existing relationships with senior retail buyers in the DIY/Hardware or Electronics categories. -Exceptional negotiation skills with a deep understanding of US retail math and contract legalities. -This is a hybrid position requiring 3 days onsite and 2 days remote each week. Pay Range$135,000—$180,000 USD

Job Description1. Role Overview This could be a remote position. We are seeking a strategic and results-driven Affiliate Marketing Director to lead, scale, and optimize our school partnership and student ambassador programs. This is a high-impact, 100% performance-based role designed for a seasoned marketer who thrives in a "pay-for-performance" environment You will own the end-to-end strategy, from identifying and recruiting high-value school partners to managing a network of student ambassadors, with the primary goal of driving student acquisition and revenue growth 2. Primary Objectives • Strategic Growth: Develop and execute a comprehensive affiliate strategy to drive measurable revenue and new student enrollment, • Network Expansion: Identify, recruit, and onboard high-quality school partners and student ambassadors that align with our brand values, • Program Optimization: Continually analyze performance metrics to refine commission structures and promotional tactics for maximum RO3. Key Responsibilities, • Recruitment & Outreach: Proactively identify and recruit potential school partners and student influencers through networking, outreach, and relationship building, • Relationship Management: Act as the primary point of contact for affiliates, providing them with the necessary training, resources, and promotional materials to succeed, • Contract & Commission Management: Negotiate and finalize affiliate agreements, ensuring clear terms, competitive commission structures, and profitability, • Campaign Execution: Collaborate with internal teams to create compelling marketing materials tailored for student and educational audiences, • Performance Tracking: Monitor affiliate activity and compliance daily, using data to identify trends and opportunities for improvement, • Reporting: Provide regular updates to senior leadership on program performance, key metrics, and growth initiatives (4. Required Skills and Qualifications, • Experience: 2+ years of demonstrable experience in affiliate marketing, partnership management, or performance marketing, preferably within the education or e-commerce sectors, • Analytical Mindset: Ability to interpret complex data and draw actionable insights to optimize conversion rates and ROI, • Negotiation Skills: Excellent communication and negotiation skills to secure high-value partnerships and manage diverse affiliate relationships (, • Technical Proficiency: Familiarity with affiliate tracking platforms, CRM tools (like HubSpot), and analytics software (like Google Analytics) (, • Education: Bachelor’s degree in Marketing, Business, or a related field is preferred (5. Preferred Attributes, • Owner’s Mindset: A self-starter who is motivated by driving results and is comfortable with a compensation model tied directly to performance, • Industry Knowledge: Understanding of the educational landscape and the unique motivations of student ambassadors., • Commission: A highly competitive percentage of revenue or a fixed fee for every qualified lead/enrollment generated through your managed programs., • Bonuses: Performance-tier bonuses for reaching specific milestones (e.g., number of active school partners or total enrollment targets)., • Transparency: We provide full visibility into tracking and attribution to ensure you are compensated accurately for every conversion you drive

Job Description Salary: $85,000 - $95,000 / year Other Forms of Compensation: Bonus Eligible Our Passion is Food! At Bon Appetit Management Company we are committed to two things, great food and outstanding service! At Bon Appetit you won't find our managers referring to a corporate recipe book or our chefs microwaving the lunch special. We do not have standardized recipes or central commissaries, instead, our chefs and managers are expected to stay abreast of current culinary trends and bring cutting edge food into their cafes. We are a restaurant company that operates in contract food service. That means you will have the freedom to be creative, take risks, and truly shine. We are committed to our staff growing, trying new things, and learning all that they can. Our rapid growth and breadth of accounts translates into exciting opportunities for our people! Job Summary The Senior Catering Sales Manager leads a high volume catering operation generating $1.5M to $1.8M in annual revenue. This role drives proactive sales growth, manages client relationships, and oversees all internal and external catering events from concept through execution. Responsibilities include event production and design, menu development, financial performance, and operational oversight. The position ensures events are delivered on time, on budget, and to the highest service standards while balancing creativity with financial accountability. Remote work flexibility is required, and the schedule includes nights and weekends based on event needs. Key Responsibilities • Drive catering sales through prospecting, client development, and achievement of revenue goals with a proactive growth strategy, not an order taking approach, • Develop proposals, contracts, banquet event orders, and manage rental agreements, • Partner with culinary teams on menu design and pricing, • Oversee preparation, transportation, setup, execution, and breakdown of events, • Manage labor and food cost controls and maintain P&L accountability, • Prepare and monitor budgets, forecasts, financial reports, and receivables, • Hire, train, coach, and develop managers and team members, • Build and maintain strong relationships with clients and vendors, • Ensure compliance with HACCP, safety, and sanitation standards, • Support marketing initiatives and special projects as assigned Preferred Qualifications • Bachelor’s degree or equivalent experience, • Three to five years of hospitality experience, including at least two years of high volume event and catering sales experience, • Proven track record of meeting or exceeding sales goals, • Experience working with vendors and leading event production and design, • Strong understanding of P&L statements and financial reporting, • Supervisory, scheduling, training, and coaching skills, • Ability to assess client needs and deliver exceptional service, • Strong attention to detail and ability to manage multiple priorities in a fast paced environment, • Knowledge of A/V setup and breakdown, • Advanced proficiency in Excel and PowerPoint, • Excellent communication, leadership, organizational, and client service skills, • High standards of integrity and professionalism Apply to Bon Appetit today! Bon Appetit is a member of Compass Group USA. Click here to Learn More about the Compass Story Associates at Bon Appetit are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Bon Appetit maintains a drug-free workplace. Req ID: 1508233 Bon Appetit Allison Murphy

Job DescriptionAssociate Attorney - Wage & Hour Class Action Wilshire Law Firm is a distinguished, award-winning legal practice with over 18 years of experience, specializing in Personal Injury, Employee Rights, and Consumer Class Action lawsuits. We are dedicated to upholding the highest standards of Excellence and Justice and are united in our commitment to achieve the best outcome for our clients. You will work side by side on a team of dynamic, collaborative, and client-focused professionals who are committed to delivering on our founding core values: Excellence, Teamwork, and Integrity. The Opportunity As an Associate Attorney in our Employment Class Action Department you will fight for our clients and win in worker rights violation cases against large corporations represented by big law firms. Associate Attorneys are expected to take significant responsibility in litigating their own docket of cases while at the same time honing their skills through mentorship by our award-winning attorneys. Accountable for • Draft and prepare pleadings, motions, and other legal documents., • Develop strategies to litigate wage and hour matters in state and federal courts., • Take responsibility in being part of a litigation team representing clients in depositions, motion hearings, and mediations., • Licensed and in good standing with the California State Bar., • Superior analytical and legal research skills., • Excel in a fast-paced environment., • Ability to communicate persuasively both verbally and in writing., • Ability to exercise common sense in complex situations., • Paid time off and paid holidays, • Opportunitiesfor growth and advancement, • Team outingsand sponsored events, • Employee referral bonus program, • Firm-paid Medical HMO with affordable upgrades, • Low-cost Dental and Vision plans, • Firm-paidLife and AD&D insurance, • 401k, • FSA (Flexible Spending Account), • EAP(Employee Assistance Program) #zr

Job Description Work Type: Onsite 4 days per week No C2C or C2H; W2 only Open to candidates willing to relocate for this position at their own expense. Description: Key Responsibilities Looking for someone with auto finance experience. Any FIS/Systematics experience is a plus. What Will the Person Be Working On Application Development and Production Support for multiple large projects Research and resolve production issues, troubleshooting of mainframe on-line and batch abends Evaluate the daily and monthly batch process to improve performance and shorten the critical path window Perform Impact Analysis across multiple platforms and applications Deliver complete documentation for estimates, design and development IBM mainframe COBOL, CICS, MQ, DB2, JCL On call support for production batch during off hours WANTS Experience in Automotive Finance industry Business knowledge of financial services, understanding of financial services automotive lending, Customer Service, Payment Processing, Taxes, End of Term and Extension processes, Collections, Delinquency Tracking, Repossession, Charge Off, Recovery, Bankruptcy, and Accounting. Familiarity with test practices and deliverables for unit test Interpersonal style that fits the client culture Company DescriptionTechLink Systems is a national provider of staffing services with offices all over the USA as well as development and support centers globally. We are a MBE (NMSDC), WBE (WBENC), and WOSB certified minority business that has been awarded 2017 TAPFIN Premier Partner, 2016 Manpower Excellence Award, 2016 TAPFIN Elite Partner, are a Known Tier Supplier for Agile 1, and have been ranked as a Top Women and Minority Owned Company since 2004 by several businesses including Philadelphia Business Journal, Diversity Business, Inc 5000, Inc 500, San Francisco Business Times, Diversity2000, and Los Angeles Business Journal. We serve the contract staffing, direct hire, staff augmentation, recruitment, HR management, and project outsourcing needs of clients nationwide. Striving to create personal relationships with clients, TechLink Systems becomes a virtual extension of clients’ own in-house capabilities to help achieve new levels of growth, productivity, and competitiveness. We also have national recruitingTechLink Systems is a national provider of staffing services with offices all over the USA as well as development and support centers globally. We are a MBE (NMSDC), WBE (WBENC), and WOSB certified minority business that has been awarded 2017 TAPFIN Premier Partner, 2016 Manpower Excellence Award, 2016 TAPFIN Elite Partner, are a Known Tier Supplier for Agile 1, and have been ranked as a Top Women and Minority Owned Company since 2004 by several businesses including Philadelphia Business Journal, Diversity Business, Inc 5000, Inc 500, San Francisco Business Times, Diversity2000, and Los Angeles Business Journal. \r\n\r\nWe serve the contract staffing, direct hire, staff augmentation, recruitment, HR management, and project outsourcing needs of clients nationwide. Striving to create personal relationships with clients, TechLink Systems becomes a virtual extension of clients’ own in-house capabilities to help achieve new levels of growth, productivity, and competitiveness. \r\n\r\nWe also have national recruiting

Job DescriptionSalary: $100.000 - $140,000 Job Summary: This position is focused on the mechanical design, development, and manufacturing of stationary and mobile antenna systems and related equipment. Essential Job Duties and Responsibilities: • Work as part of multiple integrated product teams. In some cases, will be lead mechanical engineer on a team, while in others, will be in a support and/or advisory role, • Perform hands-on design and analysis, and mentor junior engineers, • Prepare and present design and analysis material during internal and customer design reviews, • Prepare detailed product manufacturing documentation such as test procedures and assembly instructions, • Support component and antenna system level environmental testing, • Interface with ThinKom production personnel and outside suppliers during manufacturing phase of programs, • Support business development activities by providing input for proposals Skills and/or Experience Needed: • BS in Mechanical or Aerospace Engineering, • 5+ years of experience in the field of Mechanical Engineering and product design and development, • Experienced in designing for producibility, reliability, and ease of assembly and maintenance, • Experienced in the design and analysis of positioner drive systems is preferred, • Knowledge in the areas of materials, structural and thermal analysis, dynamics, vibration and mechanical shock, heat transfer, finite element analysis, and composite structures, • Knowledge of fabrication techniques such as machining, forming, casting, injection molding, and additive manufacturing, • Knowledge of fasteners, adhesives, coatings, and related industry specifications, • Solid modeling, engineering drawings, geometric dimensioning and tolerancing. Experience with Creo is preferred, • Well versed in configuration management, • Technically proficient in MS Office products Other Abilities: • Must have excellent problem-solving abilities, • Ability to communicate clearly, both verbally and in written form, • Interpersonal skills to effectively work with ThinKom personnel as well as suppliers and customers, • Ability to effectively present information in team meetings and design reviews Additional Requirements: • Must be eligible to obtain and hold a US DoD Security Clearance in support of US Government contracts/ subcontracts, • Follow ThinKom corporate policies and design procedures Physical Demands: • Ability to travel up to 10% of the time, • This position uses a computer terminal to access, input, and retrieve data, • This position may be subject to interruptions that may cause a change in immediate priorities and/or work focus, • While performing duties of this position, employee is occasionally required to stand, walk, sit, stoop, reach, and/or bend, • May occasionally lift and/or move files or boxes up to 50 pounds, • May be subjected to occasional irregular or extended work hours, • May be required to sit for extended lengths of time, • Must be able to work in an environment that may be subjected to occasional loud noises, hazardous materials, chemicals and, electromagnetic energy Salary Range - $100,000 - $140,000 ThinKom offer generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan. ThinKom Solutions is an Equal Employment Opportunity Employer. ThinKom Solutions is a Drug and Alcohol free working environment with a zero-tolerance policy.

Job Description Overview PRIDE Industries is a fast-paced company with a mission: To Create Jobs for People with Disabilities while providing high quality, value-added solutions to our nationwide customers. We are currently recruiting to fill the following position: Responsibilities PRIDE Industries Job Description Job: Maintenance Manager Federal Job Code: B07 - PR-Maintenance Mgr - Fed HR Title Group: Federal Contracts (Facilities) Salary Grade: E14 FLSA Status: Exempt Approval Date: August 2017 SUPERVISES: There are direct reports with this position. POSITION SUMMARY: Under minimal supervision the Maintenance Manager will supervise the day to day operations of the maintenance staff. Employees in this job class are responsible for planning, assigning and monitoring workloads as well as evaluating employee and contractor performance while ensuring adherence to PRIDE’s safety policies and procedures as well as provide guidance and advice on technical matters. This job class requires advanced knowledge in the areas of electrical engineering, HVAC mechanics, painting and fire alarm systems operations. TYPICAL DUTIES: 1. *Provide day to day organization, direction and supervision of skilled maintenance staff., 2. *Assigns service orders, routine and preventative maintenance tasks, and equipment projects and repairs., 3. *Supervises staff; ensures a competent, motivated staff through hiring, training, counseling, supervising and reviewing the performance of employees., 4. *Meets established time schedules., 5. *Coordinates timely completion of service calls and other jobs., 6. *Inspects the work of maintenance crew while in progress as well as provide advice and assistance as necessary., 7. *Provides training on proper techniques and diagnosis for specific tasks., 8. *Ensures compliance to established safety rules in accordance with company and federal policies and procedures in operating equipment., 9. *Monitors status of projects, and pending problems as well as offer resolutions., 10. *Oversees work of outside contractors., 11. *Monitors results of maintenance projects, preventative maintenance, and energy management programs., 12. Performs other duties and special projects as assigned. • Denotes Essential Job Function MINIMUM QUALIFICATIONS: • Five or more years of work experience in building maintenance; including three years in a supervisory role;, • Strong knowledge of electrical systems, electrical theory, and HVAC systems and operations;, • General knowledge of plumbing, carpentry and general maintenance procedures;, • Knowledge of building automation systems;, • Ability to troubleshoot, modify, and maintain maintenance systems and equipment;, • Ability to diagnose such areas as electrical, HVAC, plumbing, carpentry, drywall, roofing and exterior structures;, • Supervisory skills to hire qualified employees, provide for their professional development, administer performance management and disciplinary processes effectively, and address employee relations appropriately;, • Ability to effectively supervise and develop assigned team to meet production/service goals while adhering to safety policies and rules;, • Ability to communicate effectively both orally and in writing; to make presentations and respond to inquiries by senior management, customers and/or employees;, • Demonstrated leadership, organizational, reasoning, problem solving and analytical skills;, • Exceptional customer service skills;, • Human relation skills to build effective relationships with team, customers and public;, • Advanced computer literacy including knowledge of word processing, spreadsheet, database and presentation software;, • Knowledge of business English including vocabulary, spelling, and correct grammatical usage and punctuation;, • Mathematical skills to include the ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations; EDUCATION REQUIREMENTS: High School Diploma or GED Technical/other training CERTIFICATES OR LICENSES REQUIRED: The following licenses or certificates may be required depending on local, state and/or contract requirements: Fed Security Clearance Valid Driver's License PHYSICAL REQUIREMENTS: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance: • Viewing computer screen/monitor, • Utilizing keyboard, • Answering phone/making calls WORK ENVIRONMENT: Work is performed in a normal office environment with limited privacy and some exposure to background noise. DISCLAIMER: The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees to this job. Employees are expected to follow their supervisor’s instructions and to perform the tasks requested by their supervisors. At PRIDE, we make a difference in the lives of many, one job at a time. Qualifications Ready to make an impact? Join an organization where business meets purpose and every role contributes to a greater mission. Apply today at PRIDE Careers and be part of something meaningful. Learn more about who we are and what we stand for at . PRIDE Industries is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, veteran status, or any other characteristic protected by law. Thank you for considering a career with us—we look forward to connecting with you!

Job Description Senior Quality Engineer - Build and scale quality systems for advanced composite manufacturing Hawthorne, CA | On-site Opportunity Summary Join a fast-growing, venture-backed manufacturing team developing next-generation composite materials and production processes. This role sits at the center of product quality and manufacturing scale, responsible for building and owning the quality foundation as the company moves from pilot to high-volume production. You will establish and lead the quality program from the ground up, working across engineering, manufacturing, and suppliers to ensure every product meets rigorous performance and reliability standards. This is a hands-on role with direct impact on product development, process validation, and long-term manufacturing strategy. About Us We are an early-stage advanced manufacturing company focused on scaling high-performance composite technologies for aerospace, defense, and industrial applications. Backed by leading investors and strategic partners, the team is building proprietary processes that significantly improve production speed, cost, and scalability for complex composite components. Job Duties • Build and implement a company-wide Quality Management System aligned with ISO9001 and AS9100 standards, • Lead certification efforts and establish quality processes from initial framework through audit readiness, • Develop and execute inspection and testing protocols, including destructive and non-destructive methods, • Oversee dimensional inspection, process control, and product validation across manufacturing workflows, • Drive root cause analysis and corrective actions for defects such as delamination, porosity, and material inconsistencies, • Manage non-conformance processes and Material Review Board activities, • Partner with engineering and manufacturing to optimize processes and improve yield and reliability, • Qualify and audit suppliers for materials, components, and external services, • Support equipment selection and integration for quality inspection and testing, • Contribute to project management, requirements definition, and continuous improvement initiatives, • Engage cross-functionally with internal teams and external partners to ensure quality standards are met, • Operate within a hands-on environment, including direct involvement in testing and inspection activities Qualifications • Bachelor’s degree in engineering or a related technical field such as mechanical, aerospace, materials, or manufacturing, • 4+ years of experience working with fiber-reinforced polymer composites in a manufacturing environment, • Proven experience building or scaling a Quality Management System, including ISO9001 and AS9100 certification, • Experience with non-destructive testing methods for composites such as CT, ultrasonic testing, and tap testing, • Strong understanding of composite failure modes and defect analysis, • Experience managing non-conformance processes and implementing corrective actions, • Familiarity with PLM or ERP systems in a production environment, • Ability to work on-site in a fast-paced, evolving manufacturing setting, • Strong problem-solving skills with the ability to operate under ambiguity and tight timelines, • Effective communicator who can work across engineering, manufacturing, and supplier teams, • Hands-on mindset with comfort operating manufacturing and testing equipment Preferred Experience • Six Sigma or similar process improvement certification, • Experience with resin systems and material characterization tools such as DSC or TGA, • Familiarity with metrology equipment including CMMs and laser scanning systems, • Experience with composite molding techniques such as compression or injection molding, • Background in continuous fiber layup processes Why Join Us • Opportunity to build and own the quality function from the ground up, • Direct impact on scaling advanced manufacturing technologies, • High level of ownership and visibility across engineering and leadership teams, • Fast-paced environment with meaningful technical and career growth Compensation Details $140,000 - $200,000 #LI-AV

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. We are looking for an experienced contributor to take on a leadership role within the Thermal Engineering team, responsible for all aspects of the design, analysis and test of Lunar systems. We move fast, we have hardware going to the Moon this year, and we need an individual motivated to help accelerate this exciting endeavor. You will work collaboratively across engineering disciplines to optimize thermal management solutions, ensuring the longevity and functionality of our rovers during extended missions in harsh conditions. What you'll do: • Work autonomously and with minimal oversight to develop thermal control strategies, systems, and architectures for planetary rovers (and other surface assets), including thermal analysis, design, and testing for operation in extreme environments (lunar dust, permanently shadowed regions, equatorial and polar operation, lunar night hibernation, etc.), • Conduct thermal modeling and simulation using Thermal Desktop (as well as Thermal FEA software as needed), including transient and steady-state thermal analysis for vehicle systems exposed to vacuum, radiation, and temperature extremes to cover entire mission durations, • Perform thermal control system (TCS) trade studies (ranging from first order hand calculations to detailed parameter sweep modeling) to inform early design choices and optimize high maturity designs, • Collaborate with multidisciplinary teams to develop inputs to thermal models and to integrate thermal solutions into overall rover design, • Develop test plans for thermal qualification testing ranging from unit- to vehicle-level assemblies, • Automate workflows via programming (e.g. MATLAB/Python) to streamline thermal analysis processes and reduce engineering cycles, • Document designs, analysis results, and validation outcomes to support team understanding and future reference, • Drive performance and cost-efficiency improvements in thermal system and hardware design, • Review and provide feedback on the thermal designs and analyses of peers, • Bachelor’s degree in a STEM field, • 6+ years of experience with thermal analysis / design of in-space systems, including at the vehicle level, • Experience over the full spacecraft life cycle, including design, test, and operation, • Demonstrated ability to reason from first principles and employ reduced-order thermal modeling techniques, • Experience writing thermal qualification test plans, seeing hardware through thermal testing, and conducting model correlation, • Experience with Thermal Desktop modeling software, • Experience with programming for process automation, • Capability to quickly/efficiently distill complex information down to the most salient points, • Strong written and verbal communication skills Preferred Qualifications, • Experience with space-grade thermal components and/or extra-terrestrial rover systems, • Working knowledge of high-performance heat transfer systems (heat pipes, thermal switches, heaters, RTDs, etc.) and in-space thermal protection (MLI, MMOD, etc.), • Experience working with vendors for initial phases of thermal hardware procurement, • Experience writing thermal qualification test plans, • Experience with thermal FEA (ANSYS, Simcenter, etc.), • Familiarity with MATLAB/Python specifically, • Familiarity with SMC-S-016 and other industry-standard design/test guideline documents, • Experience working in the human-rated spaceflight domain, • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set up reimbursement, • Fully flexible and remote friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Once a month social hour on-site with food and drinks

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Launch Vehicle Design Engineer II to our team. If you enjoy working in a startup environment, and have expertise in the structural and thermal design of launch vehicle (LV) components and systems, including tanks, fairings, and related hardware, we would like to hear from you In this position, you serve as a subject matter expert, overseeing subsystem development from concept through flight, while ensuring compliance with performance, safety, and reliability requirements. This role requires both deep technical expertise and the ability to guide and mentor engineering teams within a fast-paced start-up environment. The ideal candidate will have a strong background in FEA and thermal simulations, combined with hands-on experience in experimental development and testing of high-performance aerospace systems. This role involves close collaboration with an international R&D team to optimize performance and reliability of LV hardware.JOB DUTIES AND RESPONSIBILITIES • Lead the design, analysis, and development of primary and secondary launch vehicle structures, stage interfaces, and payload accommodations., • Perform static and transient structural and thermal analysis of LV components and systems to ensure mechanical integrity under operational loads., • Develop and execute test programs, analyze experimental data, and apply findings to optimize designs., • Prepare CAD models for FEA analysis and manufacturing., • Generate technical documentation, including reports, specifications, and contributions to PDRs and CDRs., • Collaborate across mechanical, aerospace, and controls engineering teams to deliver flight-ready systems., • Mentor junior and senior engineers to build technical understanding and professional development., • Participate in mission operations, anomaly investigations, and continuous improvement initiatives.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Master’s degree in Mechanical Engineering, Aerospace Engineering, or a related field., • 11+ years of industry experience in aerospace design and analysis., • Expertise in Ansys tools: Mechanical, Explicit Dynamics (LS-Dyna), Linear and Nonlinear Eigenvalue Buckling, Harmonic Response, and Random Vibrations., • Proficiency in MATLAB for programming, data analysis, and optimization., • Proficiency in CAD tools (SolidWorks, NX)., • Strong foundation in systems engineering principles, requirements flowdown, and integration., • Hands-on experience with hardware development, testing, and qualification., • Strong analytical and problem-solving skills with close attention to detail., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Prior experience with cryogenic systems, liquid rocket systems, and LV components., • Hands-on experience designing and improving LV hardware., • Knowledge of manufacturing and technological processes for aerospace parts., • Familiarity with aerospace safety and reliability practices.

Job Description Who We Are Dermalogica stands tall as a beacon in the professional skincare realm, winning the trust of skin therapists across the globe. As a shining gem in the crown of the Unilever Prestige family, our commitment isn't just to nurture skin, but also to redefine industry standards with revolutionary skincare innovations. With a commitment to innovation, sustainability, and excellence, Dermalogica has been at the forefront of the skincare industry for over three decades. Bolstered by our International Dermal Institute – the apex of post-graduate skin and body therapy training – we are on an exhilarating journey of expansion. And you could be a part of this adventure! Support Dermalogica’s Undergraduate education for Partnership Schools by adapting US and Global educational assets for the undergraduate channel. Partner with Director US Education and Partnership Schools Sales Manager to ensure engaging, effective education that strengthens school partnerships and builds long-term brand loyalty. ESSENTIAL DUTIES AND RESPONSIBILITIES: To be successful in your role, you should be able to perform each essential responsibility to a satisfactory level. Each of these points below are characteristic of the role but is not limited to what may be required during your employment. • Support Dermalogica’s Undergraduate education strategy for Partnership Schools by leveraging existing Dermalogica educational assets and adapting them for effective undergraduate delivery., • Collaborate closely with the Partnership Schools Sales Manager and the Education Training and Development Manager to ensure education initiatives support school partnership goals, student engagement, and long-term brand adoption., • Teach the full Undergraduate curriculum to a high standard, ensuring clear, relevant, and consistent learning outcomes for students and instructors., • Adapt, maintain, and refine undergraduate education content, including digital and alternative learning formats, to ensure materials remain current, brand-aligned, and appropriate for the undergraduate audience., • Develop limited bespoke educational content for Partnership Schools where needed and support the rollout of new and updated undergraduate classes, including training instructors on delivery expectations., • Communicate undergraduate education updates, tools, and programs to internal stakeholders, including Training teams, Sales partners, and Instructors., • Present undergraduate education content at symposiums, internal meetings, school events, regional trainings, and select conferences as needed. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Key Qualifications: • Active Esthetician license required., • Five plus years of skin treatment experience and/or experience as a Senior Instructor, with a demonstrated track record of success supporting undergraduate schools within a defined territory., • Ability to travel a minimum of 30 percent, including occasional overnight and weekend travel., • Flexibility to support varied schedules, including select evenings and weekends based on business needs., • Proficiency in Microsoft Outlook, Word, Excel, and PowerPoint., • Experience working with Dermalogica products, protocols, and educational concepts., • Must reside on the West Coast, preferably California, with the ability to travel to corporate headquarters on a quarterly basis or as needed. What You’ll Bring Key Skills and Abilities • Excellent communication, presentation, and interpersonal skills, with the ability to engage diverse audiences., • Strong time management and organizational skills, ensuring effective prioritization and follow-through., • Ability to plan, lead, and facilitate impactful meetings with customer accounts and senior level decision-makers, • Proven problem-solving with a practical, solutions-focused approach., • Clear, concise written and verbal communication across multiple formats and stakeholders., • A meticulous, dedicated work ethic with strong attention to detail., • Demonstrates a high level of initiative and accountability., • Passion for education and a strong commitment to lifelong learning. What We Offer • Competitive Compensation, • Medical, Dental, Vision Insurance, • Paid Time Off, • Monthly Product Allowances, • Annual Fitness Reimbursement, • 401(k) plus company matching, • Life/Accident/Disability insurance, • Wellness programs, • Paid family leave, • Domestic partner benefits, • Education/training programs Why Join Us? • A Legacy of Success: Dermalogica is the preferred choice of Skin Therapists worldwide, renowned for our exceptional skincare line and industry-leading postgraduate education. We have a record of achievement and are committed to building upon our brand's legacy., • Entrepreneurial Spirit and Innovation: At Dermalogica, we foster an entrepreneurial spirit and encourage our employees to bring their best ideas to the table. You'll have the opportunity to make a difference and contribute to our success by implementing innovative solutions that reach skincare professionals and consumers., • Backed by Unilever: In 2015, Dermalogica became part of the Unilever family, one of the world's largest and most successful consumer goods companies. While operating as an independent business, we now have access to cutting-edge capabilities and resources, empowering us to win in our markets. Ready to make a meaningful impact and advance your career with a global brand revolutionizing the skincare industry? Apply now and complete your online application. Rest assured, all applications will be thoughtfully reviewed, and our HR team will contact you if your skills align with the position. Dermalogica is an equal opportunity employer committed to fostering an inclusive culture where all employees are valued, supported, and empowered to succeed.

Job DescriptionDescriptionAs a Senior Flight Dynamics Engineer at Impulse Space, you will lead the development and operational execution of flight dynamics capabilities across current and future programs. This role spans real-time mission support, automation of maneuver execution, trajectory development for new missions, and advancement of inertial navigation beyond LEO. You will work closely with Space Operations, Mission Design, GNC, and Software to make ambitious trajectories operationally executable. Responsibilities • Support Space Operations in planning, analyzing, and executing nominal and novel orbital maneuvers, • Automate maneuver planning and execution workflows to improve speed, reliability, and scalability, • Build and maintain flight dynamics tools used daily by Space Ops (orbital propagation, targeting, orbital determination, covariance analysis, maneuver reconstruction), • Partner with Mission Design to develop and mature new trajectories for GEO, cislunar, and interplanetary missions, • Contribute to development of inertial navigation and orbit determination capabilities across GEO, cislunar, and deep-space regimes, • Perform trade studies balancing ΔV, time-of-flight, operational complexity, and navigation sensitivity, • Support critical mission phases with high-confidence analysis and rapid turnaround Minimum Qualifications • B.S. in Aerospace Engineering, Astrodynamics, Physics, Applied Mathematics, or related field (M.S. or Ph.D. preferred), • 7+ years of experience in spacecraft flight dynamics, astrodynamics, or mission design, • Demonstrated experience with orbit propagation, maneuver targeting, and covariance analysis, • Experience supporting spacecraft operations or mission-critical events, • Proficiency in Python and/or C++ for engineering tool development, • Experience developing production-quality technical software Preferred Skills and Experience • Experience in GEO, cislunar, or interplanetary mission regimes, • Experience with low-thrust trajectory design and optimization, • Development or maintenance of orbit determination filters (EKF, UKF, batch least squares), • Familiarity with DSN-based navigation, optical navigation, or deep-space tracking, • Experience automating operational flight dynamics pipelines, • Background collaborating closely with GNC and flight software teams Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off, • Profit sharing, • Training & development We are seeking an experienced Construction Superintendent to join our team and oversee projects across Southern California. This role is based out of our Torrance office and requires strong field leadership, attention to detail, and a proven track record in hotel, restaurant, and tenant improvement construction. Responsibilities • Oversee all phases of construction projects on-site, ensuring work is performed safely, on schedule, and within budget., • Direct and coordinate subcontractors, field staff, and suppliers to ensure smooth operations., • Interpret and enforce project plans, specifications, and contracts., • Maintain project schedules and proactively identify and resolve potential delays., • Ensure strict compliance with safety regulations, conducting regular site inspections and safety meetings., • Conduct quality control checks to meet or exceed client expectations., • Communicate progress, challenges, and solutions effectively to project managers and senior leadership., • Proven expertise in tenant improvement, hotel and restaurant construction/renovations., • Proficiency in Procore (required) and familiarity with scheduling software and MS Office., • Strong knowledge of building codes, ADA requirements, construction methods, and safety regulations in California., • Ability to read and interpret blueprints, schedules, and specifications., • Excellent communication, leadership, and problem-solving skills., • OSHA 30 certification (preferred)., • Competitive salary and performance-based bonuses., • Comprehensive benefits package (health, dental, vision, 401k)., • Career growth opportunities in a well-established and respected construction firm., • A collaborative team culture focused on excellence and client satisfaction.

Job Description NOW CFO is partnering with a growing, entrepreneurial organization in the automotive space to identify a hands-on Controller to join their leadership team. This is a permanent, direct-hire opportunity on our clients team. This is an onsite role supporting a multi-entity business with strong growth potential and high visibility across operations and leadership. Location: Onsite and In-Office in Torrance, CA Compensation: $135k-$150k Position Overview The Controller will oversee day-to-day accounting operations while helping build scalable processes and systems to support continued growth. This individual will work closely with executive leadership and play a key role in financial reporting, forecasting, and operational integration. This role is ideal for a motivated, detail-oriented accounting leader who enjoys being “in the weeds” while also thinking strategically. Key Responsibilities * Develop and implement accounting processes, procedures, and SOPs * Lead monthly, quarterly, and annual close processes * Oversee journal entries, reconciliations, and general ledger activity * Manage multi-entity accounting and intercompany transactions * Support system and process integrations (CRM/ERP and related tools) * Partner with leadership on forecasting, cash flow, and financial visibility * Coordinate sales tax filings and audit support * Handle ad hoc financial projects and special initiatives * Maintain strong internal controls and documentation * Support and mentor accounting staff Qualifications & Experience * Bachelor’s degree in Accounting, Finance, or related field * 5+ years of controllership or senior accounting leadership experience * Experience with intercompany accounting and multi-entity structures * Strong background in building processes and improving efficiencies * Experience working with complex operations * Comfortable in fast-paced, high-growth environments * Highly organized, detail-oriented, and execution-focused * Proficiency with modern accounting systems (QuickBooks Online) * Exposure to small business or family-owned environments Preferred Experience * Experience working with executive teams, boards, or investors * Strong judgment around confidentiality and sensitive information Culture & Work Environment * Entrepreneurial, growth-oriented organization * Fast-paced and dynamic environment * High accountability and ownership mindset * Collaborative and supportive leadership team * Opportunity to help build and shape long-term processes Compensation & Benefits This role offers a competitive compensation package, including base salary $135k-$150k, PTO, 401k and a comprehensive benefits program. #ZR #IND1

Job DescriptionBenefits/Perks • Careers Advancement Opportunities, • Flexible Scheduling Role OverviewWe are seeking an experienced Tax Manager to support U.S. and cross-border (Japan–U.S.) tax compliance and advisory work. This role requires strong technical expertise, ownership mentality, and the ability to manage multiple engagements in a fast-paced professional services environment. Key Responsibilities • Manage U.S. federal and state tax compliance for corporate and individual clients, • Support cross-border tax matters, including Japan–U.S. coordination, • Review tax returns and workpapers prepared by staff, • Serve as a day-to-day point of contact for clients, • Coordinate with internal teams and external advisors, • Identify tax planning opportunities and support advisory projects, • Ensure deadlines, quality standards, and internal controls are met, • Japanese is plusQualifications, • CPA preferred (or in progress), • 5–10+ years of relevant tax experience (public accounting preferred), • Strong knowledge of U.S. corporate and individual taxation, • Experience with international or cross-border tax matters a plus, • Strong communication, organizational, and leadership skills, • Ability to work independently and manage competing priorities

Job Description Job Description Role Senior Account Executive Team Sales Reports to Sales Director Location Hawthorne CA We’re Supacolor. We make the world’s best heat transfer. We make it Supafast and Supaeasy to print garments like a pro. Supacolor exists for one reason: to help you make it. The Role The Senior Account Executive role is responsible for driving new business growth while nurturing existing customer relationships. This role combines consultative sales, strategic account management, and business development to expand Supacolor’s footprint across assigned territories. Senior AEs are expected to consistently deliver revenue growth by identifying opportunities, closing new accounts, and maintaining strong client satisfaction. Our Core Values Supafast. Supaeasy. Supacolor. Our Customer Promise Supafast. We work with Pace. We start the day off right giving our all each day. We work with a sense of urgency and adapt our style where necessary. Supaeasy. We keep calm under pressure, stay focused, and communicate well to drive results. Nothing is too much trouble; we keep things seamless for both customers and colleagues. Supacolor. We ensure that we are the best we can be, take pride in everything we do, and collaborate as a team to achieve success together. Key Responsibilities Senior Account Executives are responsible for the full sales cycle—from prospecting to close—while also partnering with internal teams to ensure customer success. Core areas of responsibility include: New Business Development: Identify, pursue, and close new opportunities within assigned territory. Account Growth: Expand relationships with existing customers to increase share of wallet. Customer Retention: Maintain strong client relationships to reduce churn and maximize loyalty. Consultative Selling: Understand customer needs and position Supacolor’s solutions accordingly. Territory Management: Develop and execute territory plans to achieve sales goals. Collaboration: Work with Customer Success and Account Management teams to ensure seamless handoffs and long-term growth. Insider Sales Up Key Performance Indicators (KPIs) New Revenue Attainment: Meet or exceed quarterly and annual sales targets. Account Retention Rate: Maintain strong portfolio performance with minimal churn. Pipeline Health: Maintain accurate forecasts and a balanced pipeline of opportunities. Customer Satisfaction: Achieve high CSAT and NPS scores. Supacolor Competencies Supa Positive: Bring a winning attitude and energy to every interaction. Supa Adaptable: Stay flexible, learn quickly, and thrive under pressure. Supa Organized: Manage workload effectively, stay detail-oriented, and plan ahead. Supa Teamwork: Collaborate across teams and support shared goals. Your Background, Knowledge and Skills Required Experience: 5+ years proven sales experience, ideally in B2B or related industries. Track record of consistently meeting or exceeding sales targets. Experience managing full sales cycles and complex deals. Technical Skills: Proficiency with CRM platforms (e.g., Salesforce, HubSpot, Zoho). Strong business acumen and ability to analyze data for decision-making. Solid presentation, negotiation, and closing skills. Core Competencies: Exceptional communication and interpersonal skills. Ability to manage multiple priorities while maintaining attention to detail. Consultative and solution-based selling mindset. Industry Knowledge (Preferred): Understanding of the garment decoration, DTF, or heat transfer industry. Familiarity with B2B manufacturing or specialty product markets. Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. Supacolor is an Equal Opportunity Employer, drug free workplace, and complies with ADA regulations as applicable. Company DescriptionWe’re Supacolor. We make the world’s best heat transfer, but that’s not all. We make it Supafast and Supaeasy to print garments like a pro. Supacolor exists for one reason: To help you make it. Our mission to help people grow doesn’t just apply to our customers. At Supacolor, we strive to help our employees succeed in their lives as well! Interested in joining the Supateam?We’re Supacolor. We make the world’s best heat transfer, but that’s not all. We make it Supafast and Supaeasy to print garments like a pro. Supacolor exists for one reason: To help you make it. \r\nOur mission to help people grow doesn’t just apply to our customers. At Supacolor, we strive to help our employees succeed in their lives as well! Interested in joining the Supateam?