Trabajos software qa manager en Kansas City, MissouriCrear alertas

Job DescriptionDescription: Department Study Management (CRC) Purpose The purpose of the Study Coordinator is to facilitate the study from start to finish. The Study Coordinator ensures the success of the study is achieved by working one on one with the study subject and the Principal Investigator throughout the duration of the study. The Study Coordinator will possess a high level of knowledge of study specific protocols and be the main contact for all study related questions and concerns. Job Responsibilities The Study Coordinator position reports to the Site Director and is responsible for the coordination and administration of clinical studies under the direction of the Site Director, Quality Assurance Manager, and the Medical Director/Principal Investigator. The Study Coordinator role and responsibilities include but are not limited to the ability to do: • Review and understand study protocols as assigned, • Complete required training and adhere to safety and privacy regulations (HIPAA, IATA, FDA guidelines, ICH Good Clinical Practice, etc.), • Prepare study-related source documentation according to protocol and system guidelines and work with Lead Study Coordinator and QA department collaboratively to make appropriate changes, • Communicate with and assist the Laboratory Technician regarding initial set of lab and ongoing maintenance, • Order, track, maintain, and organize Investigation Product, lab kits, supplies and devices necessary for study completion, • Prepare for study visits in a timely manner prior to subject enrollment, including preparation of subject binder and all requirements for visit, • Review eligibility of potential study subjects through methods such as careful review of the protocol (inclusion/exclusion criteria), subject interviews, request and review of medical records, and discussion with Principal Investigator, • Schedule study subjects for appointments and procedures as required by study protocols, • Obtain Informed Consent from study subjects prior to any study procedures and document appropriately, • Send out notification of study participation to primary care providers, if agreed to by subjects, • Educate study subjects on study procedures such as diary completion, electronic devices and expected outcomes in a profession and accountable manner following protocol requirements, • Process and ship lab samples if Lab Technician is unavailable, • Complete electronic data capture (EDC) and address all queries in a timely manner, • Maintain required records of study activity including subject binders and regulatory binders, and assist with end of study archiving documents, • Laboratory processing as needed, • Responsible for assuring training and documentation is completed for protocol amendments, ICFs, updated guidelines, etc., • Communicate with Research staff on an ongoing basis regarding study updates, amendments/ changes, • Communicate with Investigators on an ongoing basis regarding study progress, laboratory notifications, safety issues and other important information, • Maintain contact with sponsors/CROs and respond in a timely manner as well as schedule/ coordinate site visits, • Prepare and review subject charts for completeness and accuracy prior to site monitoring visits, • Professional communication and collaborative work ethic with CRAs at Site visits., • Record adverse events and serious adverse events in a timely manner and discuss with Principal Investigator and Site Director regarding the reporting of events to oversight agencies, • Track screening and enrollment status of study subjects and update study trackers routinely, including routing sheets for subject payments and invoices, • Perform specific protocol procedures as delegated, such as interviewing study subjects, taking vital signs, and performing electrocardiograms, etc. Additional Dialysis Study Responsibilities • Initiate DaVita staff training, including the Facility Administrator (FA) and dialysis nurses, and maintain documentation of training (protocol, ICF, lab collection, and IP administration), • Request treatment detailed report and patient summary report for study subjects in a timely manner, and as needed, • Transport lab kits and IP to and from dialysis centers per sponsor guidelines and site SOP, • Communicate effectively with DaVita FA, dialysis nurses, and other staff Requirements: Qualifications • 3 to 5 years of experience in clinical research setting or related work environment is required, • Basic understanding of regulations governing clinical research (CFR, GCP, HIPAA), • Solid understanding of statutes and guidelines relevant to regulatory affairs in clinical research, • Familiarity with or ability to learn clinical trial management system software, • CRA certification required or obtained within 6 months of employment, • Bachelor’s degree in a health-related field (e.g., Nursing, Public Health, Biology, Psychology or related discipline) required. The physical demands described here are representative of those that must be met by an employee to successfully perform the responsibilities of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform required job responsibilities. • Ability to sit, stand, walk, reach with hands and arms, and use hands along with fingers, to handle or feel., • Ability to lift and/or move up to 25 pounds., • Must have a driver’s license and personal vehicle (dialysis studies only)

Job Description Multidisciplinary design firm is seeking a Senior Project Civil Engineer - Data Center to join their Kansas City team! Responsibilities: • Serve as project manager and/or lead design engineer, • Prepare planning/design documents, • Process design calculations, • Develop/maintain project team, • Lead QA/QC efforts, • Serve as technical advisor on complex projects, • Coordinate project with other internal teams, professional/technical staff, clients and outside consultants, • Travel to job sites for observation, • Attend client meetings Requirements: • Bachelor’s degree in civil engineering, • 6+ years of related project experience, • PE License, • Proficient in Civil 3D software Salary is commensurate with experience. Successful applicants must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionEssential Duties and Responsibilities: • Act as a champion and driver of Safety, while adhering to company PPE and Safety requirements., • Act as a champion and driver of Food Safety, while adhering to company GMP requirements., • Manages and schedules the QA Technician team., • Act as backup to QA technician absences as needed., • Oversees the daily QA Technician work and inspections., • Provides training, coaching, and development of the QA Technician team members., • Regularly visits other shifts, ensures all food safety and QA tasks are completed., • Manages QA department equipment, supplies /material inventories, housekeeping., • Develop and maintain lab procedures and equipment checks, verifies lab proficiency testing., • Manages required maintenance and calibration of QA Lab and QA relevant equipment., • Creates, maintains and trains on documents and records required for the SQF standards., • Develops best practices and drives continuous improvement and efficiencies for QA., • Verifies and ensures that only current product specifications and related information is in use., • Coordinates timely resampling of finished non-conforming product., • Supports the day-to-day execution of hold and release process of raw material and finished goods., • Supports the execution of the plant environmental sampling program., • Supports handling of external samples for lab testing, customers, and corporate recipients., • Supports effectiveness thorough investigation, root cause analysis, and CAPA for deviations, non-conformances or complaints. Completes related documentation and reports., • Works with and provides technical food safety and quality expertise to other plant departments., • Supports validation and qualification processes for trials, new products, equipment, and processes., • Is a (or able to become certified as) HACCP coordinator and SQF Practitioner., • Acts as a backup to the QA Manager and the Micro Coordinator as needed., • Supports QA Manager with internal and external audits and performs GMP and Facility inspections., • Supports compliance to company and regulatory requirements, certifications, documentation, standards, specifications and GMPs, • Communicates with senior management and corporate teams. Strong verbal, written, multi-tasking and presentation skills. Ability to create momentum and foster organizational change. Proficiency in MS Excel, MS Word and MS PowerPoint or equivalent software. Experience with statistical process control, ERP systems, and QMS is highly beneficial. Experience with GFSI standards preferred. Certified (or able to become certified as) HACCP and SQF Practitioner Bilingual (English/Spanish) is preferential. Travel Requirements: Travel may be required to various plant locations for meetings or other job-related functions. Occasional local travel (<20 miles) is required to external 3PL Warehouses for inspections and sampling. Work Environment/Physical Demands: Approximately 50% of work is performed in an office environment. 50% of work may involve being in the refrigerated manufacturing environment (production floor, warehouses, freezers and other storage areas). The job activities may require sitting, standing, walking, stooping, bending, lifting (up to 40 lbs), climbing steps, stairs and ladders, work around chemicals, reading, tasting, smelling and touching of products, wearing of PPEs (hairnet, beard net, ear protection, eye protection, steel toed shoes) as required, capable of working in freezing environments for limited time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice An Equal Opportunity Employer EOE M/W/VET/DISABLED Job Posted by ApplicantPro

Job Description POSITION SUMMARY Our Quality Engineer help create solutions as part of the Quality Assurance. They work to find defects, determine the causes of those defects, and provide solutions to defective problems. The Quality Engineer for Aviation Aircraft Parts is responsible for ensuring the highest quality standards in the inspection, certification, and compliance of aircraft parts. This role involves overseeing quality control and assurance processes, maintaining regulatory compliance, and managing a team to uphold the organization’s commitment to safety, reliability, and efficiency. JOB RESPONSIBLITIES Key Responsibilities 1. Quality Control Management • Oversee and manage the inspection of incoming aircraft parts., • Develop and implement inspection protocols, ensuring compliance with industry standards such as our Quality Manual and FAA regulations., • Ensure proper calibration and maintenance of quality inspection tools and equipment., • Investigate non-conforming parts and manage the quarantine process. 2. Quality Assurance Oversight • Establish and maintain a Quality Management System (QMS) to ensure compliance with regulatory and customer requirements., • Conduct root cause analysis and implement corrective and preventive actions (CAPA) for quality issues., • Coordinate internal and external audits, including FAA, EASA, and other regulatory authority inspections., • Develop and update quality documentation, including policies, procedures, and inspection checklists. 3. Regulatory and Compliance • Ensure all parts and processes comply with Federal Aviation Administration (FAA), European Union Aviation Safety Agency (EASA), and other relevant regulatory authorities., • Maintain proper traceability and documentation for all aircraft parts, including Material Safety Data Sheets (MSDS) and airworthiness certifications., • Lead efforts to detect and prevent counterfeit or unapproved parts in the supply chain. 4. Team Leadership • Train, mentor, and supervise the QA/QC team to ensure consistent application of quality standards., • Promote a culture of quality awareness across departments., • Conduct performance evaluations and provide feedback for continuous improvement. 5. Continuous Improvement • Monitor and analyze quality metrics to identify trends and drive improvements in processes and systems., • Collaborate with engineering, procurement, and operations teams to address quality concerns and enhance product reliability., • Lead initiatives to reduce defects, optimize processes, and improve overall efficiency., • Implementing methods to inspect, test and evaluate the reliability of Repair Processes, products, and production equipment., • Make sure processes adhere to quality standards., • Prepare reports by collecting, analyzing, and summarizing data., • Work in accordance with deadlines for delivery of products and services., • Actively participates in root cause analysis, • Collect, organize, monitor, and distribute information related to the Quality Management System and process improvement functions., • Ensure that procedures and work instructions are documented according to corporate, ASA and regulatory standards., • Perform and report supplier and internal audits., • Provide supplier quality performance input to support the Quality Management System Experience: • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or a related field (or equivalent work experience)., • Minimum of 5-7 years of experience in quality assurance/control within the aviation or aerospace industry., • Prior experience managing a team in a QA/QC capacity., • Previous work experience in an aircraft parts environment, • Quantum experience preferred., • ASA auditing experience preferred., • FAA Airframe & Powerplant (A&P) license., • ASQ Certified Quality Manager or Certified Quality Engineer (CQE)., • Strong attention to detail and accuracy, • Strong knowledge of FAA, EASA, AS9100, ISO 9001, and other relevant aviation quality standards., • Proficiency in quality tools and methodologies, including Six Sigma, Lean Manufacturing, and FMEA., • Excellent problem-solving skills and ability to conduct root cause analysis., • Strong attention to detail and organizational skills., • Proficiency in using quality management software and ERP systems., • Effective communication and leadership abilities., • Knowledge of Aerospace Standards, • Strong leadership abilities, • Proven problem-solving abilities., • Proven ability to gather and compile large amounts of data and produce usable format for decision making., • Proven knowledge of Microsoft Office, • Proven excellent follow-up and organizational skills., • Proven excellent verbal and written communication skills., • Proven ability to handle deadlines and work well under pressure.

Job DescriptionDescription: Worldwide Mission Critical is a global owner's representation and project management company dedicated to the mission-critical industry, helping companies deliver their data centers on time and under budget. Founded on the principle that the right team of experienced data center professionals will deliver great projects, our ability to provide oversight for all aspects of a project sets us apart. Summary Data Center Construction Quality Assurance Manager (QA) will act as Owner’s Representative for mission critical data center projects. QA will work alongside owner, project managers, project engineers, general contractors, trade partners, equipment vendors, design and engineering consultants, and commissioning agents to assure that all installed product meets or exceeds the intent of the contract documents, as well as industry accepted standards for mission critical construction. Primary Responsibilities • Develop and maintain project-specific Quality Assurance Quality Control (QA/QC) Plan inclusive of Preparatory Meetings, First of Kind Inspections, Corrective Actions, and Final Inspections., • Thoroughly understand all project documentation including drawings, specifications, RFIs, submittals, shop drawings, equipment data sheets, and material safety data sheets (MSDS)., • Perform cadenced inspections on all installed product to ensure that it meets or exceeds the intent of the contract documents., • Report quality deficiencies to the General Contractor and trade partners via the project’s adopted software platform., • Drive all documented quality issues through corrective actions and closure authoring Root Cause Analyses (RCA) when required., • Continually audit systems installation to ensure that the key geometries, dimensions, and pathways conform to the Building Information Model (BIM)., • Partner with General Contractor and trade partners on site logistics planning and material staging to drive greater efficiency on the site., • Lead weekly quality control meetings with General Contractor and trade partners., • Provide daily quality summaries and more detailed, weekly reports to Owner., • Verify that all materials and equipment delivered to the project conform to the approved submittals, free of damage, safely stored/protected, and acceptable for use., • Maintain log of all inspections by the Authority Having Jurisdiction (AHJ). All failed inspections are to be rectified., • Participate actively and directly in the development and maintenance of a strong safety culture., • Act as liaison between General Contractor, trade partners, equipment vendors, owner operations, and commissioning agents (CxA) throughout entirety of commissioning phase., • Track all project design changes and ensure that they are accurately captured in appropriate as-built documentation and BIM files., • Support project management team on monthly applications for payment to ensure that percentage of work installed in the field matches that which has been billed., • Sustain a culture of open communication, transparency, and mutual respect and understanding between all project stakeholders. Requirements:, • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or Construction Management preferred., • 10+ years of relevant work experience in quality assurance or quality control role in data centers or similar mission critical build typologies., • OSHA 30; First Aid/CPR; or able to obtain within first 90-days of hire., • CDCP highly preferred, but not required., • LEED AP highly preferred, but not required., • Familiarity with local and national building codes including NFPA, NEC, IBC, general life safety and egress., • Robust proficiency in construction management software platforms such as Procore, BlueBeam Revu, and Autodesk Cloud., • Strong general computing skills with a focus on Microsoft Office Suite (Word, Excel, PowerPoint, Project, and Outlook.), • Uncompromising commitment to safety., • High levels of initiative, self-direction, and attention to detail., • Ability to work in a close team environment., • Ability to motivate Contractor with solid communication skills and contract knowledge to accomplish Owner and project goals., • Ability to direct troubleshooting and resolution of highly complex or unusual construction problems., • Capable of planning and organizing internal and external resources., • Problem analysis., • Willingness to take on responsibilities with a commitment to perform., • Flexibility., • Problem-solving., • Decision-making., • Excellent communication and interpersonal skills., • Willingness to travel.

About the company: One of our clients is looking for a Technology Design Project Manager with between 6-10 years professional experience in Kansas City! After building half a century of expertise and growing to almost 1k engineers and designers, they are looking for a professional who can confidently design a range of building projects, mainly within the commercial, sports, government, and healthcare sectors. What you'll be doing: • Lead design & execution of low voltage & communication system projects (structured cabling, AV, security, network systems) from concept through built system delivery, • Oversee construction phases: ensure design intent is followed, work with contractors on site, perform QA/QC and resolve field issues, • Manage partner relationships that have a technical background; assist with product selection, clarify tech specs, negotiate scope, • Develop and maintain project budgets, schedules, documentation, submittals, RFIs, and change orders., • Coordinate cross-disciplinary collaboration (MEP, architects, technology teams) to integrate communication/low-voltage systems smoothly What we're looking for: • 6-10 years experience in low voltage / communication systems design & project management, • Degree in a related field, • Strong technical understanding of communication/technology systems (e.g. AV, structured cabling, access control, security) plus familiarity with built systems, • Experience with on-site oversight and construction administration, • Proficiency with design tools (CAD/Revit/BIM) and project management software, • Strong communication, problem solving, and organizational skills More reasons to apply: • Full coverage healthcare insurance, • Additional compensation and company bonuses, • 10+ office across the US - contribute to a firm invested in exponential expansion, • Flexible schedules and hybrid options available, • Paid holidays, • Half day Fridays, • PTO, • 401k Predicted Salary: $95,000 to $140,000 (negotiable, dependent on experience)

Job DescriptionThe Project Manager - Construction is a vital part of the U.S. Engineering team and holds responsibility for overseeing the profitability and success of the project. The Project Manager gets engaged from the preparation and review of estimates, through the construction phase, and takes charge of all activities from the start to on-time and on-budget completion. Principal Duties and Accountabilities: • Responsible for project start-up, including detailed estimate review, and facilitation of purchasing, procurement, subcontracts and submittals, and project schedules., • Monitors control and construction of project through administrative direction of on-site superintendent and other field and office personnel associated with the project, to ensure quality project is built on schedule within budget., • Establishes project objectives, procedures and performance standards within scope of company policies and standard operating procedures., • Responsible for profit management of assigned projects., • Fosters effective relationships with project team, as well as clients, vendors, subcontractors, etc., • Oversees the review and processing of submittals., • Manages subcontractor proposal requests, scope reviews and the issuing of subcontracts, • Responsible for establishing and monitoring schedule of field and subcontractor progress., • Issues large purchase orders., • Reviews, edits, and approves owner and general contractor contracts., • Assists in the coordination of safety programs and oversees job site safety reviews., • Coordinates all job correspondence., • Identifies opportunities for future projects and networks internally and externally to pursue such opportunities., • Responsible for project closeouts., • Manages the professional development and mentoring of the project engineers assigned to the project., • Gathers, organizes, and documents project historical data and “lessons learned” to aid in the company’s productivity and project quality monitoring., • Responsible for reinforcing the company’s core values in how the project work is performed., • WBS and work pack management (Facilitate VC/MX), • Build, maintain and track project Schedule (CPM Schedules), • Host weekly internal coordination meetings. Management Responsibility: Acts as a project manager – management of a project team, on which the individuals comprising the team may vary by project. Education & Experience: • Bachelor’s Degree in Construction Science Management, Architectural Engineering, or Mechanical Engineering preferred., • Equivalent combination of mechanical field and leadership experience will be considered., • Minimum of 5 years of experience in mechanical construction industry., • Thorough knowledge of mechanical construction industry practices, processes, and standards., • Ability to maximize performance of project team through innovative and effective management techniques., • Superior communication and interpersonal skills, such as diplomacy, persuasion, etc. are essential to develop and foster effective professional relationships., • Time management and organizational skills., • Basic level of financial acumen necessary to manage project budget / performance., • Knowledge of the following computer programs: MS Word, Excel. Experience with project management software a plus., • Strong problem-solving, negotiation, and conflict-management skills., • Job is performed in a combination of settings, including on project site as well as in the office., • Routine driving to project sites required. May require travel or temporary assignments or relocation to manage projects outside the regional office area. U.S. Engineering is compliant with the Drug Free Workplace Act, and all offers of employment are contingent upon the completion of a pre-employment drug screen. Equal Opportunity Employer, including disabled and veterans. Powered by JazzHR w1XMPppF0F