Trabajos t en Houston, Texas - Page 3Crear alertas

ABOUT THE JOB - Lead Quality Inspector Location: Houston, Westplain Campus Work Environment: On-site Monday - Friday Work Schedule/Hours: Normal Business Hours Pay Range: The base pay range for this position is $65,000 - 70,000 USD. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. NACE Level II Coatings required. Position will manage a team of 5 employees, supervisory experience required. Reporting to the Quality Supervisor, you will be responsible for performing visual and precision instrument inspection of manufactured parts for dimensional and GD&T. Specialized inspections using CMM, Portable arm, Portable Scanner, for compliance with drawing requirements. In performing your work, you will interact with multiple internal departments including Manufacturing, Sales, Engineering, Purchasing, Quality, Accounting, and Shipping/Receiving. You may also work with external contractors. Daily workflow is assigned by the Quality Supervisor and/or based on project demands. Principle Duties and Responsibilities \n • Performing visual, mechanical inspection of purchased or manufactured parts, in process or finished, to determine if the parts conform to specifications, drawings, designated codes and standards.\n, • Using precision measuring and testing equipment, including calipers, height gage, micrometre's, surface plate, Articulated ARM, Optical Comparator to perform mechanical inspections.\n, • Preparing a Non-Conformance Report (NCR) for any part that does not meet specified requirements and processing it per established procedures.\n, • Document nonconformances in SAP- NCR module where needed and complete the transactions in SAP.\n, • Review and verification of materials received from vendors.\n, • Witnessing internal testing procedures to verify accuracy of results.\n, • Interpreting and executing an Inspection and Test Plan (ITP).\n, • Interfacing with third-party inspectors to verify completion of required customer requests.\n, • Handling other assigned work-related functions as deemed necessary and appropriate by your immediate supervisor.\n, • Provide on-the-job training and guidance to Level I inspection personnel.\n\n Knowledge, Skills and Abilities \n • Experienced in use of precision inspection equipment (ex., mics, callipers. Etc) to measure dimensional details as listed on drawings.\n, • Knowledge in reading & interpret blueprints, including GD&T.\n, • Experience in using and programming of Articulated ARMs is required. \n, • Experience in using and programming of CMM, Keyence, or Quick Vision systems is preferred.\n, • Knowledge of manufacturing processes and techniques, test equipment and procedures, and assembly applications.\n, • Use of hand and power tools.\n, • Strong computer skills including MS Office Suite skills, including Word, Excel, and Outlook\n, • Experience with SAP (Required)\n, • Knowledge of the valve industry is highly preferred.\n, • Ability to work in a team-oriented environment that is fast-paced and demanding.\n, • Strict attention to detail.\n, • Self-directed with excellent initiative.\n, • Proven ability to handle multiple tasks with a sense of urgency, drive and energy.\n, • Proven ability to execute tasks with drive and energy to deliver on time to deadlines.\n, • Excellent interpersonal, written and verbal communication skills.\n, • Strong organization and prioritization skills.\n\n Education and Experience \n • NACE Level II Coatings required.\n, • A high school diploma or GED equivalent.\n, • 3-5 years of inspection experience in a manufacturing environment.\n, • Certification in Liquid Penetrant, Magnetic Particle, or CWI (Preferred)\n\n WHAT WE DO Celeros Flow Technology is helping to engineer a more sustainable future by developing products for emerging carbon capture and storage applications, new nuclear and renewable energy, while supporting existing customers in decarbonizing their operations. Our full lifecycle solutions are designed to reduce emissions, optimize operational efficiency, and deliver sustainable returns. Together, we can create a safer, more resilient, and cleaner energy future. WHY JOIN OUR TEAM Providing great benefit choices to you and your family is just one of the many ways Celeros Flow Technology supports the physical, financial, and emotional well-being of the people who make our company successful - you! Key benefits include: Health Insurance (effective on start date) Dental/Vision (effective on start date) Flexible Spending Accounts/Health Savings Accounts Life Insurance/Disability/Accident/Critical Illness 401(k) Savings Plan with generous company match Tuition Reimbursement Paid time off/Generous Holiday Schedule Celeros Flow Technology is an equal-opportunity employer. All aspects of employment, including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Employment opportunities may require access to information that is subject to the export control regulations of the country in which you are applying. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities must be able to meet export control requirements.

Cost Analyst, Lead The Opportunity: As a cost analyst on our team, you will review and analyze complex finan cia l and cost data, create cost models, perform various cost-informed analyses, and communicate the results to program and project leadership. You won't go at it alone, you will work as part of a cross-functional team with clients to translate program requirements into cost estimates by using your knowledge and skills to gather relevant data, document assumptions, and create para met ric estimates and Independent Government Cost Estimates ( IGCEs ) . You'll work with peers to develop cost risk analyses using Monte Carlo simulation sof t war e and joint cost and schedule confidence level ( JCL ) models, and employ your strong analytical skills to provide meaningful insight into the data. In this role, you'll also be able to share your passion for finance, data, analytics, and statistics to employ mathematical techniques, statistical met hods, engineering met hods, and scripting languages to develop new and novel approaches for estimating cost. If you are ready for an opportunity to apply and grow your data analysis and client-service skills, then there is a place for you at Booz Allen. Join us. The world can't wait. You Have: \n • 15+ years of experience performing cost or finan cia l estimation or analysis\n, • Experience applying statistical techniques or analysis to forecast future costs for informing programmatic decisions\n, • Experience using complex logic-based formulas in Micro sof t Excel\n, • Experience using cost estimating sof t war e or tools \n, • Experience developing cost estimate documentation such as basis of estimates\n, • 20+ years of experience working in a professional environment\n, • Experience working on a team in a multi-disciplinary collaborative environment\n, • Experience communicating the results of analysis for clients in verbal and written formats, including presentations\n, • Experience collecting, normalizing, and analyzing historical cost data for hard war e and sof t war e, and leveraging this data to develop cost estimating relationships\n, • Experience with Monte Carlo simulation sof t war e and JCL sof t war e, including JACS or Primavera Risk Analysis, and Para met ric Cost Estimating Tools, including TruePlanning, SEER, and Project Cost Estimating Capability\n, • Experience with space organizations or the DoD\n, • Ability to multitask and work under minimal supervision\n, • Ability to prioritize and balance time across impactful workstream activities\n, • Bachelor's degree in a STEM field\n At Booz Allen, we celebrate your contributions, provide you with opportunities and choices, and support your total well-being. Our offerings include health, life, disability, financial, and retirement benefits, as well as paid leave, professional development, tuition assistance, work-life programs, and dependent care. Our recognition awards program acknowledges employees for exceptional performance and superior demonstration of our values. Full-time and part-time employees working at least 20 hours a week on a regular basis are eligible to participate in Booz Allen's benefit programs. Individuals that do not meet the threshold are only eligible for select offerings, not inclusive of health benefits. We encourage you to learn more about our total benefits by visiting the Resource page on our Careers site and reviewing Our Employee Benefits page. Salary at Booz Allen is determined by various factors, including but not limited to location, the individual's particular combination of education, knowledge, skills, competencies, and experience, as well as contract-specific affordability and organizational requirements. The projected compensation range for this position is $86,900.00 to $198,000.00 (annualized USD). The estimate displayed represents the typical salary range for this position and is just one component of Booz Allen's total compensation package for employees. This posting will close within 90 days from the Posting Date. Identity Statement As part of the hiring process, we will ask you to complete an identity verification process that leverages advanced biometrics and artificial intelligence to ensure authenticity and protect against identity fraud. You are expected to be on camera during interviews and assessments. We reserve the right to take your picture to verify your identity and prevent fraud. Candidate AI Usage Policy AI is a part of our daily work at Booz Allen, and we are committed to the responsible and ethical use of AI tools. However, we want to ensure a fair candidate process based on your own skills and knowledge. As part of this commitment, the use of artificial intelligence (AI) or other tools to assist with responses during interviews (whether in-person or virtual) is prohibited unless permission is explicitly provided. Work Model Our people-first culture prioritizes the benefits of collaboration, whether it occurs in person or virtually. To support engagement and effective communication, employees working virtually are generally expected to have their cameras on during meetings. \n • \nRemote: If this position is listed as remote, there may still be occasions when you are required to work in person at a Booz Allen or customer facility.\n, • \nHybrid: If this position is listed as hybrid, you will be expected to work from a Booz Allen facility frequently, in alignment with leadership expectations and the needs of the role. You may also be required to work from or visit a customer facility.\n All qualified applicants will receive consideration for employment without regard to disability, status as a protected veteran or any other status protected by applicable federal, state, local, or international law.

Job DescriptionTriple S Flotech is a manufacturer’s representative and factory authorized automation facility for valves that are engineered to withstand severe applications. We pride ourselves on knowing our customers’ processes and being able to provide flow control solutions. Triple S is also an authorized automation facility for Mogas, L&T and other valve lines we represent. Triple S Flotech is a subsidiary of FloWorks International LLC, which is a privately held company located in Houston, Texas. Job Information The Inside Sales role is responsible for developing customer relationships by identifying customer needs, informing customers about the company's products or services, providing solutions and recommending new and better products. Handles customer requests and issues via telephone, fax or email. Coordinate with the outside sales team and other departments to ensure that customers receive the best service possible. Respond to customer orders and quotation requests received via outside salespersons, telephone, e-mail, written, and faxed correspondence. Key Responsibilities • Provides pricing and delivery information, • Responsible for entire order processing which includes assigning, reviewing, approving, and distributing customer order documents to all appropriate departments, • Responds to internal and external inquiries in a timely manner ensuring all requests have been handled and completed daily, • Performs follow-up to ensure timely shipment of materials and customer satisfaction, • Maintains strong working relationships with Customers and Vendors, • Purchase Material as needed for Customer orders and stock material, • Resolves customer service issues, • Tracks open sales orders, • Industry product knowledge, • HS Diploma or GED required. 0-2 years of experience in area of responsibility, • Good written and verbal/oral communication skills, • Knowledge of MS Office software and Adobe, • Self-driven with a positive attitude and demeanor, • Customer service experience, • Excellent communication, time management and organizational skills, • Professional telephone etiquette, • Frequently required to stand, • Frequently required to walk, • Continually required to sit, • Continually required to utilize hand and finger dexterity, • Occasionally balance, bend, stoop, kneel or crawl, • Continually required to talk or hear, • Continually utilize visual acuity to read technical information and/or use a keyboard, • Occasionally required to lift/push/carry items up to 25 pounds, • Occasionally work near moving mechanical parts, • Occasionally exposure to outside weather conditions This role operates in a professional office environment and standard office equipment such as computers, phones, and printers are used. Occasional visits to warehouses or operational sites may be required. The Perks of Working Here FloWorks offers a competitive benefits package designed to support your health, financial well-being, and work-life balance. Highlights include: • Medical, Dental & Vision Insurance with multiple plan options, • Company-paid Life and Disability Insurance, • 401(k) with company match, • Health Savings & Flexible Spending Accounts, • Supplemental coverage (Accident, Critical Illness, Hospital Indemnity), • Employee Assistance Program (includes 3 free counseling sessions), • Identity Theft Protection at discounted rates This information indicates the general nature and level of work performed by associates in this role. It is not designed to contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this role. This description supersedes any previous or undated descriptions for this role. Management retains the right to add or change the duties of the position at any time. Questions about the duties and responsibilities of this position should be directed to the reporting Manager or Human Resources. FloWorks is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or protected veteran status. Committed to fostering a culture where every individual is valued and empowered to contribute to shared success. FloWorks participates in the US Government’s E-Verify program.

Job Description Job Title: Full-Time T&D/Substation Estimator Job Summary: We are seeking a talented and detail-oriented T&D Estimator to join our team on a full-time basis. In this role, you will be responsible for estimating costs associated with electrical power transmission and distribution projects. This includes developing accurate project cost estimates, coordinating with stakeholders, and contributing to the successful planning and execution of projects. Key Responsibilities: * Prepare comprehensive cost estimates for transmission and distribution (T&D) projects, including substation design and construction. * Collaborate with stakeholders to gather project requirements, specifications, and other necessary details. * Analyze and interpret RFPs (Request for Proposals) and RFQs (Request for Quotations) to develop project plans and budgets. * Develop project schedules and identify resource requirements to ensure feasibility and accuracy of cost estimates. * Monitor project budgets and provide updates to ensure alignment with financial goals. * Maintain clear communication with project stakeholders and team members to address potential challenges and propose solutions. * Utilize Microsoft Office Suite and other relevant tools to create detailed reports and documentation. Qualifications: * Minimum of 10 years of experience in project management or related roles, particularly in T&D or similar industries. * Bachelor’s degree in Engineering or a related field. * Proven experience in project management, particularly in T&D or related industries. * Proficiency in interpreting and responding to RFPs and RFQs. * Strong knowledge of substation design principles and related systems. * Advanced proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, and Project). * Exceptional analytical and problem-solving skills with a keen attention to detail. * Ability to work effectively both independently and within a collaborative team environment. What We Offer: * Competitive salary and comprehensive benefits package. * A challenging and rewarding work environment with opportunities for professional growth and development. * A supportive team culture within a growing organization. If you are a motivated professional with the qualifications and experience we’re seeking, we encourage you to apply. Please submit your resume by clicking the apply button. We look forward to hearing from you!

Job Description Senior Mechanical Engineer Own mechanical R&D for Fleetzero battery modules: From a clean-sheet concept through production-ready design. ABOUT THE ROLE You will be the driving force behind the full mechanical development lifecycle of our battery module products. That means owning designs from initial concept and first-article prototypes, through development testing, design validation, and into high-volume manufacturing. You will work closely with electrical, manufacturing, and systems engineering counterparts to deliver robust, producible hardware on aggressive schedules. This is a hands-on role. You will be building and testing prototypes yourself, running experiments, and iterating quickly. If you are the type of engineer who is equally comfortable at a CAD workstation and a build bench, this role is for you. WHAT YOU'LL OWN • Mechanical design of battery module enclosures, thermal management systems, and structural assemblies from concept through production release, • Prototype fabrication and first-article builds, you will get hands-on, not just hand off drawings, • Development testing: design validation, environmental, vibration, thermal, and ingress protection testing, • DFM/DFA collaboration with manufacturing engineering to ensure designs are producible and scalable, • FEA and CFD analysis to validate designs analytically before committing to hardware, • Managing and releasing engineering drawings, GD&T callouts, and BOMs in Solidworks PDM, • B.S. or M.S. in Mechanical Engineering, • 5+ years of experience in product development with demonstrated ownership of hardware from prototype to production, • Strong fundamentals in heat transfer, fluid mechanics, solid mechanics, and mechatronics, • Expert-level Solidworks proficiency, including drawings with full GD&T, • Hands-on experience with FEA tools (ANSYS, Abaqus, Solidworks Simulation, or similar) and CFD tools (Fluent, Star-CCM+, or similar), • Ability to improvise and test solutions quickly, you prototype on your own, not just through vendors, • Experience designing for high-volume manufacture: injection molding, sheet metal, castings, extrusions, weldments, • Experience with battery systems, power electronics enclosures, or thermal management for high-energy-density products, • Background in marine, defense, automotive, or industrial equipment markets, • Familiarity with IP-rated enclosure design and sealing strategies

Job DescriptionWho We Are Since 1933, Heath Consultants Incorporated has been a trusted leader in natural gas safety and field services. As a family-owned company with over 90 years of innovation, we take pride in the work we do and the people who make it possible. Our culture is built on safety, integrity, and a genuine commitment to helping our customers succeed — and that starts with having the right people in the right seats. The Opportunity We're looking for an energetic, customer-focused Inside Sales Representative Support to join our Sales team in Houston. This is a role where your communication skills, problem-solving instincts, and passion for delivering exceptional service will directly impact customer satisfaction and company growth. If you thrive in a fast-paced environment, love building relationships, and take pride in knowing your products inside and out this role is for you. Candidates MUST be local to the Houston, TX area( Near Hobby Airport) for the interview process and work environment. Key Responsibilities You'll be at the heart of our customer experience — the go-to resource for quotes, questions, and solutions. Day to day, you can expect to: • Manage inbound customer inquiries via phone and email with professionalism and a sense of urgency, • Prepare accurate sales quotes, contracts, and process orders from start to finish, • Troubleshoot customer concerns and resolve them proactively — turning a problem into a positive experience, • Identify and act on cross-sell and upsell opportunities that genuinely benefit the customer, • Maintain clean, thorough records in our CRM system and ERP platform (Epicor), • Coordinate with internal departments : Production, Engineering, Accounting and more — to keep things moving, • Follow up with customers weekly to ensure satisfaction and build lasting relationships, • Keep our sales team informed of key client contacts, anticipated deals, and any emerging challenges, • Support international shipping logistics, working with major carriers like UPS, FedEx, and freight forwarders, • 2+ years in customer service, inside sales, or a related customer-facing role, • Strong verbal and written communication skills — you can write a professional email and handle a tough call with ease, • Sharp multitasker: you can be on a call with a customer and entering an order at the same time, • Proficiency in Microsoft Office (Outlook, Word, Excel) and CRM tools, • Experience with ERP systems; Epicor knowledge is a strong advantage, • Familiarity with shipping logistics, including UPS, FedEx, and freight forwarding, • High school diploma or GED required; associate degree or BS/BA preferred, • You're a natural problem-solver — you don't wait to be told what to do when a customer has an issue, • You take ownership of your work and follow through, every time, • You build trust quickly — with customers and colleagues alike, • You bring positive energy to the team, even on the busiest days, • You're curious and committed to learning our full product line and what sets Heath apart Our Values P – Protect people, assets and the public. R – Respect everyone, always. O – Own your job. T – Tell the truth early. E – Execute with discipline. C – Communicate clearly. T – Take pride in quality work. Work Environment You'll be based at our Houston corporate office in a collaborative, customer service environment. We offer a clean, professional workspace and the stability of a company that has been delivering results for more than nine decades. In the event of office closures or natural disasters, remote work capability is supported with company-provided equipment. This is a primarily sedentary role with occasional light office activity. Business casual attire is expected, and personal protective equipment is required when visiting our production floor.

Job Description Primary Function: The Billing Specialist is responsible for assigned customer accounts (Time & Material / Fixed Price billings) within the billing process to ensure timely and accurate billings, and collections. Duties & Responsibilities Employee may be called upon to perform any or all of the following functions: • Prepare billing based on a mid-month and monthly billing cycle coordinating those billing activities with various departments and project managers, • Accurately enter required job setup details and change order information in accounting system timely., • Collect the required supporting documents for T&M and Fixed Price project billing each billing cycle, • Generate billings timely; follow-up with customers within specified timeframe to ensure receipt and acceptance whether billings are mailed or entered into customer approved systems, • The understanding and ability to compile WIP for unbilled expense at month end close, • Maintain accurate billing documentation/support for audit purposes, • Respond timely to inquiries from PM’s and/or customers, • Maintain accounts receivable customer files and records, • Meet accounting deadlines for month-end process and closing cycles, • Perform reconciliations as required, • Assist other companies/divisions with any issues that they may have regarding billing application and process, • Perform order entry/change order functions within accounting system including entering job budgets, • Assist in the data entry review process performed by other divisions/companies, • Monitor accounts receivable and notify PM’s of issues with unpaid invoices by customers, • Perform Accounts Payable Vendor Master file setups based on documentation received by AP department, • Assist with any month-end close items as required, • Maintain database (Excel file) of various customer portal logon/password in secured AR spreadsheet, • Perform ACH Vendor Callbacks, • Assist cash application personnel with invoice payment issues as needed, • Other duties and responsibilities as needed Minimum Qualifications / Experience High school diploma or equivalent is required; Associate’s degree in Business, Accounting, or equivalent field is preferred. A minimum of three (3) years’ experience working in Accounts Receivables with emphasis on producing fixed price and time & material billings is required. Prior experience to the application of cash receipts is highly preferred. Possess skills in the following areas: • Demonstrated proficient using MS Office programs including Outlook, Word, and Excel, • Demonstrated attention to detail to accurately prepare billings and perform reviews, • Ability to take care in processing and handling confidential information, • Ability to define problems, collect data, establish facts, and draw valid conclusions, • Proven communication skills, both oral and written, to convey thoughts, ideas, and facts to a diverse group of individuals from co-workers, project managers, and customers, • Ability to prioritize and work in a fast-paced environment to meet all deadlines

Job Description TITLE: Crude & Natural Gas Marketing – Midstream (Manager/Director/Advisor) Please note: Title and compensation will be assigned commensurate with the candidate’s experience. ABOUT THE COMPANY: W&T Offshore (NYSE: WTI) has been an independent oil and natural gas producer active in the acquisition, exploration, and development of properties in the Gulf of Mexico since 1983. We take pride in offering excellent work/life balance, a strong community environment, and a diverse asset portfolio. WORKING LOCATION: Houston Office - 5718 WESTHEIMER RD 77057 FULL-TIME/PART-TIME: Full-Time SCHEDULE: Mon-Thurs – 9/Friday – 4 (In-Office) EXEMPT/NON-EXEMPT: Salaried-Exempt POSITION SUMMARY: Responsible for ensuring that all natural gas, NGL’s, crude oil or other products produced/extracted from the Company’s wells are marketed or sold while maximizing the product value. This includes but is not limited to negotiation of gas or oil transportation, gas processing, gas, oil and NGL sales or other agreements that facilitate the logistics of the products to market. PRIMARY RESPONSIBILITIES: • Understand, negotiate, draft, edit, and summarize, in a timely manner, any agreements required to facilitate all Marketing aspects of the Company’s hydrocarbon production, • Understanding of downstream oil, gas, condensate, and processing infrastructure including but not limited to oil/gas pipelines, processing plants, separation facilities, etc., • Make recommendations to Management on high profile Marketing and midstream related items, as needed, • Work directly with the Legal Department to review material or other agreements prior to approval and execution, • Ability to manage oil, gas, gas processing, gas balancing, contract administration and FERC regulatory oversight requirements of the Company, as needed, • Responsible for determining past and future gas and oil price differentials in support of Acquisition and Divestiture (A&D), Reservoir Engineering or other Company departments that need product valuations, • Be a key team contributor to evaluate marketing agreements, logistics, etc. along with risks or upside opportunities related to acquisitions or divestitures, • Undertake RFP or other optimization projects to extract the best value for the Company’s hydrocarbon production optionality, • Responsible for monthly invoicing, accruals, and yield calculations for the various fields, • Stay abreast of all factors or variables that may influence the value of the Company’s product sales and present periodic market updates, • Assists gas and oil marketing team on any logistical issues that may arise, • Research, evaluate and optimize gas processing differentials by modeling gas processing terms, gas plant recoveries, NGL prices, etc. KNOWLEDGE, EDUCATION & EXPERIENCE: • 15+ years of experience with exposure to commercial transactions and knowledge of oil, gas, NGLs, and midstream assets, • Bachelor’s degree in Business, Accounting, Finance, Engineering or related discipline is required, • MBA is highly desirable, • Excellent verbal and written communication skills, • Excellent organizational skills with a high level of attention to detail, • Excellent time management skills with an ability to prioritize and manage projects, • General PC ability Advanced Excel skills required ESSENTIAL FUNCTIONS: Successful job applicants will be able to perform these functions. Reasonable accommodation will be made to enable individuals with disabilities to perform the essential functions. • Report to the Corporate Office daily and adhere to schedule, • Ability to access, input, and retrieve information from a computer and/or electronic device, • Ability to have face-to-face conversations with stakeholders, peers and executive management, • Ability to sit or stand for long periods of time and move around work environment as needed, • Comply with company policies and procedures PHYSICAL REQUIREMENTS: • Requires prolonged sitting, some bending and stooping, • Occasional lifting up to 10 lbs., • Manual dexterity sufficient to operate a computer keyboard and calculator, • Ability to wear hard hat, flame retardant clothing, steel toe safety boots and full-face respirator (emergency use only) This description is intended to describe the type of work being performed by a person assigned to this position. It is not an exhaustive list of all duties and responsibilities required by the employee. W&T Offshore is an Equal Opportunity Employer and is committed to the principles of equal employment opportunity for all employees and applicants for employment. W&T Offshore Inc. offers competitive total rewards including health & welfare benefits, 401k match, competitive pay and an annual bonus program (STI). W&T Offshore does not offer sponsorship of employment-based nonimmigrant visa petitions for this role.

Job Description Organization UPG Company, LLC Position Quality Control Inspector - 3rd Shift Direct Reports None. FLSA Status Hourly – Non-Exempt (NE) Position Location 7865 Northcourt Rd, Suite #100, Houston, Texas 77040 Website Company Overview UPG is a global manufacturer of complex assembled components and finished products, serving the data center, automotive, energy, and industrial markets. UPG products are sold to over 40 global blue-chip customers, and the company has developed a strong market position based on its technical expertise combined with unparalleled quality, delivery, and service levels. UPG operates three world-class manufacturing facilities – in Houston, Texas; Cardiff, Wales; and Suzhou, China – that offer a complete range of capabilities, including product design, engineering, rapid prototyping, and plastic injection molding, along with a suite of other technology platforms, value-added assembly, and global supply chain management. Reporting Relationship Reports to the Quality Manager Core Function The Quality Inspector ensures all products meet established quality standards and customer specifications by performing precise start-up, in-process, and final inspections in accordance with the Quality Plan. This role requires a highly qualified individual with strong experience in dimensional measurement, blueprint and part drawing interpretation, and the use of precision inspection tools such as calipers, micrometers, gauges, and coordinate measuring machines (CMM). The inspector verifies conformance to specifications, identifies and documents nonconformances, and communicates findings to production and quality teams to support corrective actions, ensuring product integrity and consistent adherence to quality requirements throughout the manufacturing process.. Essential Duties & Responsibilities * Performs thorough start-up, in-process, and final inspections in accordance with the company’s Quality Management System (QMS), customer specifications, and approved procedures. * Conducts precise dimensional inspections using calipers, micrometers, gauges, and CMM equipment to verify product conformance to drawings and tolerances. * Performs inspection of first articles, sample runs, and process/tooling modifications, ensuring accurate documentation and timely feedback to production. * Conducts capability studies and other analytical assessments to evaluate process stability; clearly communicates findings and improvement recommendations. * Interprets part drawings, GD&T symbols, and customer requirements to ensure full understanding of product expectations and critical characteristics. * Regularly reviews inspection instructions and control plans to ensure inspection accuracy and relevance. * Verifies that product labeling and packaging meet all quality and customer requirements before release. * Accurately documents inspection results, nonconformances (NCMRs, VRRs, RMAs), and ensures proper quarantine of nonconforming materials; promptly notifies the Production Supervisor and Quality Manager. * Records inspection data and reports in WIN-CONTROL and other approved systems with accuracy and completeness. * Monitors Statistical Process Control (SPC) trends, identifies out-of-control conditions, and initiates appropriate corrective or containment actions. * Effectively communicates inspection results, quality issues, and relevant shift information to the oncoming inspector and production leadership. * Maintains all inspection equipment in proper working condition, promptly reporting calibration needs, damage, or accuracy concerns. * Assists in training new operators and inspectors to ensure consistent application of inspection standards and quality practices. * Demonstrates leadership, self-motivation, and a high level of attention to detail while promoting a culture of quality and safety throughout the facility. * Adheres to all company safety procedures, policies, and quality standards in every aspect of work. * Provides proactive support to the Quality Manager through accurate reporting, effective communication, and collaboration on quality improvement initiatives. * Actively supports and enforces the company’s Quality Policy, Objectives, and Continuous Improvement initiatives. * Performs other related duties as assigned by the Supervisor or functional managers. Additional Job Information This job description is not designed to cover or contain a comprehensive listing of activities, duties, and responsibilities that are required of the employee for this job. Duties and responsibilities may change at any time with or without notice. Training Requirements ISO Quality Procedures (ISO9001 / AS9100 / ISO13485) Skills Basic computer and math skills to measure specifications. Educational Requirements High School diploma or equivalent General Education Diploma. Experience can be substituted for education. Experience 3 to 5 years of working as a QC Inspector in a manufacturing environment Physical Requirements Light Work – Exerting up to 20 pounds of force occasionally, and / or up to 10 pounds of force frequently, and / or lift, carry, push, pull or otherwise move objects. If the use of arm and / or leg controls requires exertion of force greater than sedentary work and worker sits most of the time, the job is light work. Visual Acuity The worker is required to have close visual acuity to perform an activity such as; preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and or operation or machines (including inspection); using measurement devices; and/or assembly or fabrication of parts at distance close to the eyes. Work Conditions The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature change. The worker is subject to noise: There is sufficient noise to cause a worker to shout in order to be heard above ambient noise level. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. AAP/EEO Statement Equal Opportunity Employer: Disability/Veteran

Job Description Manager, Contracts & Commercial Governance Office Environment Houston, TX – Exempt – Full Time Rotating Machinery Services (RMS) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. THE ROLE The Manager, Contracts & Commercial Governance is responsible for enterprise-wide governance of customer contracts, terms & conditions, and non-disclosure agreements across Rotating Machinery Services (RMS). This role ensures consistent risk management, protects margins, supports deal velocity, and provides a single point of accountability for contractual standards across all business units. This position operates independently of individual business units and serves as the corporate authority on contractual risk, while partnering closely with Sales, Commercial Operations, Finance, and external legal counsel. SKILLS • Contract Negotiation & Redlining – Ability to review, interpret, and negotiate customer contracts, master service agreements (MSAs), NDAs, and commercial terms., • Commercial Risk Assessment – Strong understanding of contractual risk elements including indemnification, limitation of liability, warranties, insurance requirements, liquidated damages, and payment terms., • Commercial Acumen – Ability to balance legal risk mitigation with business objectives, supporting deal velocity while protecting company margins and risk exposure., • Contract Governance & Standardization – Experience developing and maintaining contract templates, fallback language, and enterprise contract standards across multiple business units., • Cross-Functional Collaboration – Ability to work effectively with Sales, Finance, Operations, and executive leadership to support commercial negotiations and contract execution., • Customer Negotiation Support – Confidence supporting or participating in customer negotiations related to contractual terms and risk allocation., • External Counsel Coordination – Experience working with outside legal counsel and managing legal review for complex or non-standard agreements., • Contract Lifecycle Management – Understanding of contract review workflows, intake processes, and prioritization systems to support efficient contract turnaround., • Risk Communication – Ability to clearly communicate contractual risks and implications to non-legal stakeholders and recommend practical solutions., • Process Development & Continuous Improvement – Capability to build scalable processes and governance structures that support company growth and acquisitions., • Attention to Detail – High level of accuracy in reviewing contractual language and identifying potential risks or inconsistencies., • Organization & Prioritization – Ability to manage multiple contract reviews simultaneously in a fast-paced commercial environment. Preferred Skills • Experience supporting industrial services, EPC, manufacturing, energy, or turbomachinery industries, • Familiarity with WorldCC / IACCM contract management principles, • Experience supporting post-acquisition contract integration, • Familiarity with contract lifecycle management (CLM) systems PRIMARY ROLE RESPONSIBILITIES Contract & Legal Governance • Own RMS standard contract templates, customer T&Cs, and NDAs, • Review, redline, and negotiate customer contracts, MSAs, and NDAs, • Maintain approved fallback language and risk playbooks, • Identify, assess, and escalate contractual risks per defined thresholds, • Ensure consistent contract positions across all business units Commercial Support & Deal Enablement • Partner with Sales and Commercial teams to support timely deal execution, • Provide guidance on contractual language during customer negotiations, • Balance risk mitigation with commercial practicality and deal velocity, • Serve as the primary interface between RMS and external legal counsel External Legal Management • Manage third-party legal spend and engagement, • Route non-standard or high-risk terms to external counsel as needed, • Ensure knowledge transfer from outside counsel into internal standards Policy, Process & Continuous Improvement • Establish and maintain enterprise contract review processes, • Develop intake, prioritization, and SLA models for contract reviews, • Support integration of newly acquired companies (e.g., TurboCare) into RMS contractual standards, • Maintain contract governance documentation and training materials Cross-Functional Collaboration Work closely with: o Sales & Commercial Operations o Finance & Risk o Business Unit leadership o Procurement and Vendor Management (as needed) This role is not embedded in any individual business unit, responsible for technical scope definition or a substitute for licensed legal counsel. ADDITIONAL RESPONSIBILITIES The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Manager, Contracts & Commercial Governance. This list is subject to change based on the needs of the company. SUCCESS METRICS • Reduced contract cycle times, • Improved consistency of contract terms across RMS, • Controlled and predictable external legal spend, • Positive feedback from Sales and Finance on deal support, • Scalable processes that support growth and acquisitions REQUIRED EXPERIENCE AND QUALIFICATIONS • 7–12 years of experience in contracts management, commercial governance, or legal operations, • Experience supporting complex industrial services, manufacturing, energy, or EPC environments strongly preferred, • Demonstrated experience negotiating customer contracts and MSAs, • Strong understanding of commercial risk, liability, indemnification, and warranty structures, • Ability to balance risk mitigation with business realities, • Comfortable working across decentralized organizations and post-acquisition environments REQUIRED EDUCATION • Bachelor’s degree in Finance, Accounting, Economics, Engineering, or related field. ADDITIONAL REQUIREMENTS ● This position will be based full-time in our Houston, TX location. ● Expected travel 0-15%. ● This is an on-site position requiring a minimum of 3 days per week in the office. Flexibility for remote work may be available based on efficiency and coordination with the manager. ● This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs. ● Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance. ● While performing the duties of this position the employee will be required to stand, sit, bend and walk for significant portions of the shift ● This position can be required to participate in the company random or customer specific drug and alcohol screening and background check. ● Able to understand, read, write, and speak English. ● Authorized to work in the United States. ● RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. Work Environment While performing the duties of this position, the employee may enter a shop environment and be exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles.

Job DescriptionWe’re hiring a CNC Lathe Operator for our Southwest Houston client! We are looking for experienced, reliable, hard-working employees who can interview immediately! DESCRIPTION OF YOUR DREAM JOB: • Job Title: Aerospace CNC Lathe Operator, • Location: Southwest Houston, • Pay: $24+ DOE, • Hours: 6:00am – 2:30pm, • Duration: Temp to hire

Job Description Job Summary We are seeking an experienced Machinist to support precision manufacturing operations at our Houston (Rankin Road) facility. The ideal candidate will have strong hands-on experience operating turning and milling machines, with the ability to set up and run equipment independently while maintaining high quality and safety standards. Key Responsibilities • Operate turning and milling machines to manufacture precision components, • Experience with 5 axis, • Work with Mazak Mazatrol and Hurco WinMax controls (experience preferred), • Operate manual machines (lathe, mill, etc.) as required, • Perform machine setup including tooling, fixturing, offsets, and program verification with minimal supervision, • Interpret and work from engineering drawings and blueprints, including Dimensional tolerances and GD&T symbols and callouts, • Conduct in‐process and final inspections using precision measuring instruments, • Ensure components meet quality, accuracy, and specification requirements, • Follow all safety, quality, and standard operating procedures, • Maintain a clean and organized work area Required Qualifications • 5–8 years of experience as a Machinist in a manufacturing or job shop environment, • Proven experience operating turning and milling machines & experience with 5 axis, • Strong knowledge of machine setup and machining processes, • Ability to operate manual machines when required, • Excellent understanding of blueprints, tolerances, and GD&T, • Proficiency with precision measuring tools, • Ability to work independently with minimal supervision, • Strong attention to detail, accuracy, and workmanship

DOVER PRECISION COMPONENTS: Dover Precision Components 'DPC' ('the Company') is part of Dover Corporation's ('the Parent Company') Pumps and Process solutions segment. DPC holds market leading positions globally and delivers performance-critical solutions across the oil & gas, power generation, marine, industrial, chemical and general processing markets. We design and manufacture mission-critical equipment components to deliver more affordable, cleaner energy solutions and enable manufacturers to operate more efficiently. WE DELIVER CUSTOMER SUCCESS Dover Precision Components delivers products and services that enhance performance, improve safety, reduce carbon emissions, and accelerate clean energy adoption, through collaborative customer relationships, expert engineering, and an innovative culture. Our strong Company portfolio is comprised of long products and services offered under Cook Compression, Cook Mechanical Field Services, Waukesha Bearings, Waukesha Magnetic Bearings, Inpro/Seal, Bearings Plus, and FW Murphy Production Controls. Our global footprint reaches more than twelve locations in the Americas and more than six locations in Europe and China. BUILDING POTENTIAL. SUSTAINING PERFORMANCE. BOOSTING FUTURES. We are diligent in recognizing our employees' needs and providing an enriching experience through professional developmental opportunities. Our authentic, collaborative company culture, combined with a competitive suite of health and welfare offerings, emulates who we are. We are Dover Precision Components, #LifeAtDPC The Senior Manual Machinist will set up and operate turret or engine lathes, also a strong preference in manual mill machines. This role will also perform all machining operations that are subject to short lead times and close tolerances on a continuous basis, such as air products. You will work to exact tolerances, determine speeds and feeds and recognize and report corrections in blueprint errors. In this role, you must be able to cut internal and external threads. What you'll Do: • Reads process sheets, blueprints and sketches of part to determine mashing to be done, dimensional specifications, set up and operating requirements., • Mounts work piece between centers, in chuck or to faceplate., • Observes numerical displays to verify dimensional adjustments, feed rates and speeds of machining cuts., • Inspect run pieces and spot check succeeding pieces for conformance to specifications., • Uses measuring equipment such as micrometers, calipers and ccm for conformance to specifications., • Machines bronze, stainless, plastics and other materials. \nWhat you'll Bring:, • High School Diploma or GED, • 7+ years of experience in manual machining, • Experience with GD&T (Geometric Dimensioning & Tolerancing), • Experience machining finish-grade components to tight tolerances \nRequired Knowledge, Skills and Abilities:, • Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions., • Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one., • Training - Ability to effectively communicate processes and train new and existing employees., • Leadership - Ability to lead and mentor employees., • Production and Processing - Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Mathematics - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Equipment Selection - Determining the kind of tools and equipment needed to do a job., • Design - Knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models., • Ability to review blueprints or other instructions to determine operational methods or sequences., • Ability to set-up manual machines and/or program CNC machines independently., • Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems., • Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and talk or hear. The employee is occasionally required to walk; sit; use hands to finger, handle, or feel; and taste or smell. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 80 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. Working Conditions: The work environment characteristics described here are representative of those and employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate. *Note: This Job Description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by the Supervisor. All requirements are subject to change and updates. We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position's responsibilities, a candidate's work experience, a candidate's education/training, the position's location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work. Benefits: Benefits for this position include: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short-term disability and long-term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law. Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact [email protected] assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response. Nearest Major Market: Houston Job Segment: CNC, Environmental Engineering, Machinist, QC, Industrial, Manufacturing, Engineering, Quality

Job DescriptionFounded in 2017, Obsidian Security was created to close a critical gap: securing the SaaS applications where modern business happens—platforms like Microsoft 365, Salesforce, and hundreds more. Backed by top investors including Greylock, Norwest Venture Partners, and IVP, we've built a complete SaaS security platform to reduce risk, detect and respond to threats, and prevent breaches at the source. Our team includes leaders who helped define the categories of endpoint and identity security at CrowdStrike, Okta, Cylance, and Carbon Black. Now, we're transforming how SaaS is secured—in the era of agentic AI. Today, Obsidian is trusted by global enterprises like Snowflake, T-Mobile, and Pure Storage. We protect more than 200 organizations across North America, Europe, the Middle East, Southeast Asia, Australia, and New Zealand—including many of the world's largest Fortune 1000 and Global 2000 companies.With strong global momentum, a growing partner ecosystem including SentinelOne, Databricks, and Google Cloud, and a major fundraise on the horizon, we're scaling quickly toward long-term growth and IPO readiness. Join us as we define the future of SaaS security! About the Team: We're looking for a hardworking, focused and driven Enterprise Account Executive to channel energy, passion and initiative into new logo acquisition. You'll be responsible for developing and executing against a comprehensive account/territory plan whilst working collaboratively with our internal and external resources. This is a 100% remote role with ability to travel within and outside of this region. About the Role: • Proactively, identify, qualify and close sales pipeline across your territory and accounts, • Close business to meet and exceed monthly, quarterly and annual business targets, • Demonstrate an extensive understanding of the Obsidian Security offering and our value to our customers, • Align with our partners and alliances to optimize opportunities, • Partner with internal resources across Sales Engineering, Customer Success and Customer Support, • Demonstrate accurate pipeline forecasting and management, • 5+ years of enterprise sales experience, • Working knowledge of sales concepts, methods and techniques, • Experience evangelizing new technology into F1000 accounts., • Able to maintain and manage existing client relationships and accounts., • Able to utilize existing client and/or C-Level relationships, as well as build new relationships across IT Security as well as other lines of business., • Self Starter that creates and maintains a sales pipeline by capturing accurate and complete information in selected CRM databases including activity, closing, project forecast, close ratios and market intelligence., • Strong ability to understand a customer's business issues and needs and be able to articulate and map back value to a solution., • Strong prospecting skills, deal qualification, and POV management skills, leading to acquisition of new business., • Team player with the ability to collaborate well with internal stakeholders or partners to drive opportunities to closure., • Need to maintain and keep up with market trends, competitor analysis, and market conditions which may impact customers. Our competitive benefits packages are designed to support our employees' well-being, both at work and at home. Our US based employees enjoy: • Competitive compensation with equity and 401k, • Comprehensive healthcare with dental and vision coverage, • Flexible paid time off and paid holiday time off, • 12 weeks of new parent or family leave Pay Transparancy Please note that the base pay range is a guideline and for candidates who receive an offer, the base pay will vary based on factors such as work location, as well as the knowledge, skills and experience of the candidate. In addition to a competitive base salary, this position is eligible for equity awards and may be eligible for sales commission or incentive compensation based on the role or function within the company. At Obsidian, we are proud to be an equal-opportunity employer. We value diversity and hire for talent, passion, and compassion. In compliance with federal law, all persons hired will be required to submit satisfactory proof of identity and legal authorization. If you have a need that requires accommodation, please contact Information collected and processed as part of any job applications you choose to submit is subject to Obsidian's Applicant Privacy Policy. Base Salary Range$124,000—$176,000 USD

Job DescriptionBRAND NEW! 10 openings on each shift! Apply in person at 21840 Northwest Freeway Suite E Cypress, TX 77429! Job Title: General Warehouse Operators(Spanish Only OK) Location: Houston, TX 77095Job Type: Full-Time | Temp-to-HireMust be flexible to work weekends!! Pay: • 1st Shift: $12/hr (6:00 AM – 2:30 PM), • 2nd Shift: $12/hr (2:00 PM – 10:30 PM), • Receive plastic containers from a conveyor belt, • Trim excess plastic when needed, • Stack boxes onto pallets, • Perform basic quality checks, • Keep work area clean and organizedImportant:, • No machine operation required, • Employees will not interact directly with machineryWork Environment:, • Non-climate controlled warehouse, • Must be comfortable working in hot conditions (up to 120°ree;F in summer)Dress Code:, • Jeans, leggings, t-shirt (no shorts), • Must dress modestly, • Closed-toe shoes required (no additional PPE required)Requirements:, • Ability to stand for long periods, • Ability to lift and stack materials, • Reliable and punctual, • Willingness to work assigned shift Título del Puesto: Operadores Generales de Almacén Ubicación: Houston, TX 77095Tipo de Trabajo: Tiempo Completo | Temporal a PermanenteDebe tener disponibilidad para trabajar los fines de semana!! Pago: • 1er Turno: $12/hora (6:00 AM – 2:30 PM), • 2do Turno: $12/hora (2:00 PM – 10:30 PM), • Recibir contenedores de plástico de una banda transportadora, • Recortar exceso de plástico cuando sea necesario, • Apilar cajas en tarimas (pallets), • Realizar inspecciones básicas de calidad, • Mantener el área limpia y organizadaImportante:, • No se requiere operar maquinaria, • No habrá interacción directa con máquinasAmbiente de Trabajo:, • Almacén sin aire acondicionado, • Debe estar dispuesto a trabajar en calor (hasta 120°ree;F en verano)Código de Vestimenta:, • Jeans, leggings o camisetas (no shorts), • Vestimenta modesta requerida, • Zapatos cerrados obligatorios (no se requiere PPE adicional)Requisitos:, • Capacidad para estar de pie por largos periodos, • Capacidad para levantar y apilar materiales, • Puntualidad y responsabilidad, • Disponibilidad para trabajar el turno asignado

Job Description Manual Machinist (Temp-to-Hire) Location: Pasadena, TX 77507 Pay: $30-$40/ hour DOE Shift: 7am-4pm M-F, O-T as needed (40-70 hrs/ week) Candidate should have experience with: • VTL, • Manual Lathe, • Drill Press, • Bridgeport Knee Mill, • Horizontal Boring Mill (48x30" BT 50 Holder), • Experience with compressor component repairs and overhauls a plus, • Must be able to create own set up, • Must be able to work in metric, • Have own tools a plus but not required, • Background check and drug screen required Email resumes to . Put Manual Machinist in the subject line. Powered by JazzHR U7azjGYP56

Job Description\uD83D\uDC4B Intro:Jupe is building a hardware and full stack software platform to go after the shelter problem for the world. Our current product is a flat packed structure that can ship anywhere, 15X more efficiently, than anything else on the market and pop up in a few hours. If you haven't been there, please first check out the Careers @ Jupe page here. \uD83D\uDCAAWhat you'll be doing:As the As the Process Engineer, you will be filling a critical position broadly responsible for the configuration and optimization of the production space as needed. You will report to the COO and your role will include significant amounts collaboration with the mechanical design engineer based in SF. \uD83E\uDE90Responsibilities:- Create and adapt process documentation, ensuring it is kept current (e.g. Manufacturing Instructions, Standard works documents, PFMEA, standard works, and Control Plans)- Create and maintain sketches, engineering drawings, and CAD models- Evaluate and select components and subassemblies- Design and build mechanical tooling- Investigate and solve production problems- Create and manage production schedules- Communicate with vendors and suppliers on technical matters- Utilize SPC data and tools to characterize all equipment processes for operating limits, robustness, and action limits- Develop and enable data-driven operational and financial decisions through predictive insights into tool and process performance, including the integration of factory data systems- Champion continuous improvement projects and standardization to support best in class Lean manufacturing systems to maximize yield, capacity, and capability - Generate and execute business improvement ideas for cost reduction, labor savings, material flow, and safety -Perform supporting activities for engineering and manufacturing including 5S and Lean manufacturing activities, material handling improvements, production line configuration, and safety procedures \uD83E\uDD67Basic Qualifications:- Bachelor’s or an advanced degree in Engineering.- Minimum of 3 years of hands-on experience in complex manufacturing e.g., automotive, facilities, aerospace, manufacturing, etc.- Familiarity with manufacturing with material systems and coatings such as wood products, fiberglass reinforced polymers, thermal and acoustic insulation materials.- Mastery with CAD software such as OnShape, SolidWorks, Siemens NX, AutoCAD, Rhino, etc. towards creating static, quasi-static, deformable body, durability, aero and thermal sytems- Strong organizational and scheduling skills. \uD83E\uDE9APreferred Skills and Experience:- Experience with tiny houses/trailers/RV’s/ADU’s/boats, or other living accommodations in small spaces.- Experience with drafting and GD&T concepts. \uD83E\uDDF0Additional Requirements:- Ability to perform job duties that require standing, kneeling, crouching, twisting upper body, working in cramped positions in small openings.- Ability to work safely from ladders.- Work performed in an environment requiring exposure to sawdust, odors, and noise.- Operational schedule may vary based on company needs. Schedule flexibility is required.- Travel may be required to support shipping, delivery, setup, product support, and other needs. \uD83D\uDE80Ready to build something amazing? Apply here and if you have more to add write us at or DM the CEO @ProfDumpster on Twitter. LFG!!!Jupe is an Equal Opportunity Employer; employment with Jupe is governed on the basis of merit, competence and qualifications, and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status. Contact for more information or to submit materials. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Title: Machinist III Department: Manufacturing Location: Houston, TX Reports To: Machine Shop Supervisor Classification: Non-Exempt Shift: 2nd Shift Position Summary: Perform setups and run production jobs on multiple CNC machines using knowledge of machining to optimize the production of parts. Essential Job Duties: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Read and interpret Engineering drawings., • Make accurate measurements with precision micrometers and various other instruments., • Thorough knowledge of GD&T., • Ability to read and edit G & M codes , teach tools, and load programs, • Ability to perform set-ups on CNC machines, lathe and/or mills, • Thorough knowledge of tooling, materials and cutting parameters., • Promotes the company initiative of Lean Manufacturing/ Continuous Improvement projects., • Ability to work with little to no supervision., • Able to train and assist CNC Operators. Essential • High School diploma or general education degree (GED), or Essential • 7+ years as CNC machinist primarily with FANUC or MAZAK controls., • Knowledge of G & M codes, editing the programming., • Ability to identify and solve problems., • Ability to perform own set-ups., • Strong math skills., • Strong verbal and written communication skills., • Basic computer skills., • Physical ability to stand, bend, sit, walk and lift up 40 pounds for 8 to 12 hours per day. Gilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business comply with the law at all times. The incumbent must read, understand and comply with, at all times, the Policy along with all other corresponding policies, procedures and directives. QHSE Responsibilities: • Demonstrate a personal commitment to Quality, Health, Safety and the Environment, • Apply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management Systems The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Physical Dexterity required; ability to ascend/descend ladders; ability to lift, push, pull, and move objects fifty (50) pounds or more., • Ability to wear and utilize Personal Protective Safety Equipment (PPE). Required equipment includes steel toed shoes, safety glasses/goggles. Additional PPE may be required, e.g., safety harnesses, Fire Retardant Clothing (FRC), hard hats, or other as assigned. The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. Founded in 1963, Gilmore, a Control Devices, LLC company, is an industry leading flow control technology company that improves the reliability, integrity, efficiency, and productivity of critical infrastructure. Gilmore's flow control solutions are suited to the toughest environments and across all markets where critical service requirements make them essential (high temperature, high pressure). Gilmore offers competitive compensation, a comprehensive benefits package, paid time off, and a solid 401(k) retirement plan to promote financial security. Gilmore is an Equal Opportunity Employer. We provide equal employment opportunities to all employees and applicants and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Weld Inspector, Aerospace Level III Houston, TX About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With multiple NASA lunar missions in development and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About the Position: Intuitive Machines is seeking a Level III Welding Inspector to join our team. The Aerospace Level III X-Ray Welding Inspector is responsible for overseeing and performing advanced nondestructive testing (NDT) on welded aerospace components using radiographic (X-ray) inspection methods. This role ensures compliance with customer, regulatory, and industry standards while supporting production, engineering, and quality operations. The Level III Inspector provides technical guidance, certifies personnel, develops procedures, and ensures that all radiographic inspections are performed accurately, safely, and consistently. A candidate for this position will be encouraged to take on as much responsibility as practical and will be expected to play a role in the manufacturing and implementation of parts that will support or be part of the Lunar program. This includes but is not limited to the Lunar Lander, Satellites, Payloads support, Test and Verification and others. Responsibilities: • Perform and interpret radiographic (X-ray) inspections on welded aerospace componentsin accordance withNAS 410, ASNT SNT-TC-1A, or equivalent standards., • Serve as Level III authority for radiographic testing (RT), including oversight of Level I and II NDT personnel., • Develop, authorize, andmaintainNDT procedures, work instructions, and inspection techniques., • Review weld quality, evaluate discontinuities, anddetermineproduct acceptance based on engineering drawings, specifications, and applicable codes., • Lead and manage certification, training, and technical evaluations for NDT personnel., • Ensure all inspection activitiescomply withradiation safety protocols andmaintainrequired documentation., • Collaborate with engineering and production teams to resolve weld and material quality issues., • Support MRB activities, root-cause investigations, and corrective action planning., • Maintainall NDT records, including film, digital archives, technique sheets, and calibration data., • Interface with customers, auditors, and regulatory bodies during assessments or program reviews., • Current NDT Level III certification in Radiography (RT)in accordance withNAS 410, ASNT SNT-TC-1A, or equivalent., • 5+ years of experience performing radiographic inspection in aerospace manufacturing or repair environments., • Demonstratedexpertisein weld evaluation, defect characterization, and radiographic interpretation., • Strong understanding of aerospace materials, welding processes, and associated discontinuities., • Ability to read and interpret engineering drawings, specifications, and GD&T., • Knowledge of radiation safety regulations and safe operating procedures., • Additional NDT certifications (VT, PT, MT, UT)., • Experience with digital radiography (DR/CR) systems., • Knowledge of AWS D17.1, ASME standards, and aerospace welding requirements., • Experience with NADCAP audits and compliance. Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Role and Responsibilities • Oversee the day-to-day operations of specialty trade projects from mobilization to project completion., • Manage and supervise on-site crews, subcontractors, and vendors to ensure efficient and high-quality project execution., • Develop and maintain project schedules, ensuring work is completed on time and within budget., • Review project plans, specifications, and blueprints to ensure compliance with project requirements and industry standards., • Monitor project progress, including tracking milestones, addressing delays, and resolving issues that may arise on-site., • Enforce strict adherence to safety regulations and ensure that safety practices are followed at all times., • Perform regular inspections of the job site to ensure quality control and compliance with project standards., • Collaborate with project managers, clients, and other stakeholders to ensure clear communication and alignment on project goals., • Coordinate material deliveries, equipment rental, and labor needs to ensure timely project execution., • Provide leadership, mentorship, and guidance to on-site staff, fostering a positive and productive work environment., • Address and resolve any on-site issues or conflicts quickly and professionally to prevent project delays., • Prepare daily, weekly, and monthly progress reports for project managers and clients., • Ensure all project documentation is up to date, including change orders, daily logs, and inspections., • Manage project budgets, track expenses, and ensure cost control measures are in place to maintain profitability., • Promote continuous improvement by identifying efficiencies and suggesting improvements to work processes. Qualifications and Education Requirements • High school diploma or equivalent; additional technical training or certifications in specialty trade or construction management is a plus., • 7+ years of experience in the specialty trade industry, with at least 3 years in a supervisory or superintendent role., • In-depth knowledge of construction processes, project management, and specialty trade practices., • Strong leadership skills with the ability to motivate and manage a diverse team., • Proficient in reading and interpreting blueprints, project plans, and specifications., • Extensive knowledge of safety regulations and the ability to enforce safety standards on-site., • Excellent problem-solving, organizational, and time management skills., • Strong communication skills, both verbal and written, with the ability to liaise with clients, vendors, and team members., • Ability to manage multiple projects simultaneously in a fast-paced environment., • Proficiency in construction management software or tools (e.g., Procore, Buildertrend, etc.) is a plus., • Valid driver’s license and reliable transportation. Preferred Skills: • Certification in OSHA safety training or other relevant trade certifications., • Experience in managing large-scale or complex specialty trade projects. Physical Requirements • Occasional travel may be required based on project location., • Ability to lift over 20 pounds, including lifting and carrying materials, • The employee must be able to perform the essential functions of the job with or without reasonable workplace accommodation. The individual must also be able to wear and properly utilize appropriate personal protective equipment (PPE) to work or visit within areas where it is required. This includes hard hat, safety glasses/spoggles, respirators, ear plugs, steel toed shoes, or other protective equipment as required by the work performed and location the work is being done. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at JT Thorpe Company is on an “at-will” basis. There is no contract of employment between JT Thorpe Company and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Job Type: Contract Workplace Type: Remote, but must live in US and preferably within Central/Eastern Time Zone Compensation: Commission only based on successful recovery of claims Schedule: Flexible full-time caseload with preferred Monday to Friday during business hours COMPANY OVERVIEW Phoenix Loss Control (PLC) is a US-based business services provider in the cable, telecom, and utilities sector. PLC’s core service is outside plant damage investigation, recovery, and prevention. Across the US and parts of Canada, we help our clients recover the costs of third-party damage to their infrastructure, such as underground fiber optic or gas lines. PLC currently employs over 140 people, servicing some of the largest cable and telecoms operators (e.g., Comcast, Spectrum, AT&T, and Google). PLC is currently aggressively expanding its business and looking for talented and energetic people to bring onboard to help drive growth. POSITION SUMMARY Claim Recovery Agents are responsible for reviewing information provided on a damage, determining the liable party, invoicing the responsible party, and pursuing recovery of the repair costs. Duties • Review and analyze claim information, identify liable party, and take action to move claims toward successful resolution, • Gather costing and prepare invoices for select clients, • Correspond with liable party/insurance carrier both verbally and in writing, • Negotiate settlements, • Strong computer skills and knowledge of Microsoft Office, • Ability to work independently, manage goals and deadlines, have good attention to detail, • Adaptability, logical thinking and conscientiousness, • Excellent communication skills (both verbal and written), • Strong conflict resolution and negotiation skills, • Uncapped Compensation Potential: Top Performers who excel at the role have the ability to earn an annual compensation of more than $100,000

Job Description The Safety Technician is responsible for ensuring a safe working environment within an industrial setting by supporting safety programs, conducting inspections, and monitoring compliance with safety regulations. This position plays a key role in preventing accidents, injuries, and environmental hazards, while ensuring compliance with OSHA standards and other regulatory requirements. The Safety Technician works closely with management, supervisors, and employees to foster a culture of safety and minimize workplace risks. Role and Responsibilities • Safety Inspections: Conduct regular safety inspections of facilities, equipment, machinery, and work areas to ensure compliance with safety standards and regulations (e.g., OSHA, EPA)., • Incident Reporting and Investigation: Assist in the reporting, documenting, and investigating workplace accidents, near misses, or safety incidents. Collect data, analyze root causes, and help develop corrective actions., • Safety Training: Support the implementation and delivery of safety training programs for all employees. This may include training on proper use of PPE, safe machine operation, emergency procedures, and hazard recognition., • Compliance Monitoring: Monitor and ensure adherence to safety policies, procedures, and local, state, and federal regulations. Assist in preparing for safety audits or inspections by regulatory agencies., • Personal Protective Equipment (PPE): Assist in the selection, inspection, and distribution of PPE to employees. Ensure that appropriate PPE is being used at all times and maintain accurate records of PPE compliance., • Risk Assessment: Assist in identifying potential hazards in the workplace (chemical, physical, environmental) and recommend solutions to mitigate risks and improve safety practices., • Emergency Response: Support emergency response plans, assist in evacuation drills, and ensure that employees are aware of emergency procedures, including fire safety, first aid, and chemical spill response., • Documentation and Reporting: Maintain accurate records related to safety activities, inspections, training, incident reports, and safety compliance. Prepare reports for management as needed., • Hazardous Material Management: Assist in the safe storage, labeling, and disposal of hazardous materials in compliance with safety regulations. Monitor handling of hazardous substances to ensure proper precautions are followed., • Safety Audits: Participate in internal safety audits, assist in implementing improvements based on audit findings, and track the effectiveness of corrective actions., • Safety Equipment Maintenance: Ensure that safety equipment such as fire extinguishers, alarms, eyewash stations, and first-aid kits are properly maintained and operational., • High school diploma or GED required. Associate’s degree or certification in Occupational Safety and Health, Environmental Health, or a related field is preferred., • Knowledge of safety standards and regulations, including OSHA, EPA, and industry-specific guidelines., • Ability to perform safety inspections and identify potential hazards., • Strong communication skills, both written and verbal, for delivering training and reporting safety findings., • Familiarity with safety equipment, tools, and personal protective equipment (PPE)., • Strong attention to detail and organizational skills., • Ability to work independently and as part of a team., • Works in an industrial setting, including factories, plants, or construction sites., • Ability to lift heavy materials (up to 50 lbs)., • Ability to walk, stand, and inspect work areas for extended periods., • Physical labor may be required, including the ability to lift and move equipment or materials., • Personal protective equipment (PPE) must be worn at all times for safety., • Shift work or overtime may be required based on project deadlines. The Company expects and requires all employees to observe and fulfill all safety responsibilities as outlined in workplace safety training, and actively work toward maintaining a safe workplace. Failure to do so can result in disciplinary action, up to and including termination of employment. Regular attendance and punctuality are required of all employees. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Employment at Thorpe Plant Services, Inc. is on an “at-will” basis. There is no contract of employment between Thorpe Plant Services, Inc. and anyone or all its employees unless explicitly stated elsewhere. Employment security cannot be guaranteed for or by any employee. No Manager, Supervisor, or employee of the Company has any authority to enter into an agreement for employment for any specified period of time or to make an agreement for employment other than at-will. Thorpe Specialty Services and its affiliates provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Burrow Global is seeking to hire four (4) results-driven Instrumentation Engineers for a 12 month in-plant assignment with a petrochemical plant in Deer Park, TX. The successful candidate will design, implement, commission, and maintain instrumentation systems that monitor and control chemical processes. This role ensures safe, reliable, and efficient operation of plant facilities in compliance with industry standards and company procedures. Key Responsibilities: • Design, specify, and select instrumentation and control hardware (P&ID development/support, field devices, control valves, actuators, transmitters, receivers, PLC, DCS, ESD, SIS) for petrochemical processes., • Develop and maintain process control philosophies, instrumentation standards, tagging conventions, datasheets, and instrument index (I/I+T) standards in alignment with project and site requirements., • Create and review instrument specifications, datasheets, installation drawings, loop diagrams (P&IDs), cable schedules, instrument lists, and calibration procedures., • Perform instrument sizing and control valve calculations, including flow, pressure, temperature, and process performance considerations., • Participate in hazard and operability studies (HAZOP/HAZID) and ensure instrumentation integrity for safety-critical systems (SIS, ESG/EFS, F&G)., • Lead instrument design deliverables for new plants, debottlenecks, debottlenecking studies, and revamps; support front-end loading (FEL) and detail design phases., • Develop and execute FAT/SAT, commissioning test plans, and startup assistance for instrumentation systems., • Configure and adjust PLC/DCS systems, create control logic, and implement instrumentation calibration and maintenance strategies., • Support instrument loop checking, commissioning, and FAT/SAT, including instrument loop check sheets and commissioning handover packages., • Establish and monitor maintenance plans for instrumentation assets (calibration schedules, preventive maintenance, spares management, retrofit planning)., • Collaborate with process engineers, electrical engineers, mechanical engineers, safety engineers, and operations to optimize process performance and reliability., • Review and approve engineering deliverables and MOC requests impacting instrumentation and provide input for risk assessments and change control., • Participate in project scheduling, cost estimation, and procurement activities for instrumentation equipment and services., • Maintain as-built documentation, vendor data, technical manuals, and CMMS entries; ensure accurate instrument tagging and data integrity., • Support incident investigations (RCIs) related to instrumentation and provide root-cause analysis and corrective actions. Qualifications: Bachelor’s degree in chemical, Mechanical, Electrical, Instrumentation, or a related Engineering discipline. Advanced coursework or certifications in instrumentation, control systems, or process safety are a plus. Experience: 7+ years of experience in instrumentation and control within the petrochemical, oil & gas, or refining industries. Experience with capital projects, plant commissioning, or operations is required Active TWIC Card is required. Knowledge: • Strong understanding of process control concepts, instrument types (transmitters, gauges, switches, controllers), and control strategies (SIS, ESC, DCS/PLC, PI systems)., • Familiarity with P&IDs, loop diagrams, instrument index, BOMs, and calibration procedures., • Baseline knowledge of electrical systems and safety instrumented systems (SIS) lifecycle., • Awareness of hazard analysis methods (HAZOP/HAZID) and risk-based approach to instrumentation design., • Proficiency with standards and codes: IEC 61511/61508, ISA standards, API standards relevant to instrumentation and process safety, NFPA, IECEx/ATEX (where applicable). Skills: • Strong analytical and problem-solving abilities; attention to detail., • Proficient in using engineering software: AutoCAD for drawings, PFD/P&ID software, instrument data sheets, valve sizing tools, and control system software (e.g., Delta V, ABB PLCs., • Data management and document control proficiency; ability to manage datasheets, calibration records, and commissioning documentation., • Excellent written and verbal communication; ability to prepare technical reports, specs, and commissioning procedures., • Project management and coordination skills; capability to work cross-functionally in a multidisciplinary team. Personal Attributes: • Safety-focused mindset with commitment to process safety and risk management., • Self-motivated, organized, and capable of handling multiple tasks and priorities., • Willingness to travel to project sites and perform on-site installation, testing, and commissioning as required. Physical and Working Conditions: • Work environment may include office, plant site, and field locations with exposure to noise, chemicals, and varying temperatures., • Ability to wear personal protective equipment (PPE) as required by site policies.

Job DescriptionCompany Description International SOS Government Medical Services, Inc. delivers customized medical and security risk management and wellbeing solutions to enable our clients to operate safely and effectively in environments far from home. Founded in 1984, we operate in 92 countries providing integrated medical solutions to organizations with international operations. Our innovative technology and medical and security expertise focus on prevention, offering real-time, actionable insights and on-the-ground quality delivery. We provide clinical services to include “hands on” direct care at over 800 sites around the world, many of which include inpatient clinical care capabilities. With 12,000 staff (including 5,200 medical and behavioral health providers) our services include the design, deployment, and operation of healthcare solutions including freestanding surgical facilities in remote and austere environments, telemedicine consultation through a wide range of virtual modalities, referrals to a global network of more than 100,000 vetted providers, and global aeromedical evacuation. Within our portfolio of companies, International SOS Government Medical Services, Inc., headquartered in Houston, Texas provides contracted healthcare support to Government defense and civil agencies and government contractors, including support to military exercises and operations, diplomatic missions, natural disasters, and refugee care. To protect your workforce, we are at your fingertips: internationalsos.com Job Description The Pricing Analyst is responsible for supporting the development of pricing strategies for U.S. Government contract proposals. This role assists in building cost models and ensuring pricing proposals are competitive, accurate, and compliant with federal regulations and company policies. The Pricing Analyst analyzes staffing requirements, compensation data, and cost inputs to support proposal development, conducts profitability analysis, and provides insights to support decision-making. The Pricing Analyst role offers an opportunity to contribute to successful proposals and pricing initiatives in a government contracting environment. A successful candidate will demonstrate strong analytical skills, attention to detail, and the ability to collaborate with cross-functional teams while ensuring compliance with federal contracting standards. • Support pricing approaches for proposals across various Government contract types (FFP, CPFF, T&M, IDIQ) to ensure competitiveness and compliance., • Indpendently builds and maintains detailed cost models and pricing templates aligned with contract requirements and scope of work., • Analyze staffing requirements and compensation expectations based on locality and contract-specific constraints., • Assist in performing cost and profitability analysis for bids and ongoing contracts, providing insights to support pricing decisions., • Ensure compliance with Government regulations (e.g., FAR and DFARS) and internal company policies throughout the pricing process., • Research and analyze market trends, labor rates, and industry data to support pricing assumptions and recommendations., • Compose compliant price narratives for proposal submission., • Collaborate with proposal teams, finance, and operations to gather inputs and ensure accurate and timely submission of pricing deliverables. This list is non-exhaustive, and the role holder may be required to undertake additional duties that are not specifically listed above. Qualifications Basic Requirements/Certifications: • Experience in pricing, financial analysis, or proposal support within the Government contracting space., • Familiarity with Government contract types (FFP, CPFF, T&M, IDIQ)., • Working knowledge of the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS)., • Strong analytical and financial modeling skills, including proficiency in Excel or similar tools., • High attention to detail with the ability to work with large data sets and ensure accuracy., • Strong communication and collaboration skills to support cross-functional teams., • Understanding of cost structures and profitability drivers in government contracts., • Ability to manage multiple tasks and meet deadlines in a fast-paced environment., • Self-motivated, problem solver, who can work independently Education & Experience Required: • Bachelor’s degree in business, finance, accounting, or a related field is required., • 3–6 years of experience in Government contracting or pricing/financial analysis. Physical Requirements: • Work is normally performed in a typical office work environment., • Work involves sitting and standing for prolonged periods of time., • May require bending, stooping, and lifting up to 15 lbs. Additional Information Privacy Disclaimer: Policy Link By clicking “I’m Interested” and submitting your application, you acknowledge that you have read and understood the applicable Privacy Policy (available via the link above) and agree that International SOS Government Medical Services, may collect, use, store, transfer, and otherwise process your personal information in accordance with that Privacy Policy for recruitment and hiring purposes. Compensation Disclaimer: Pay range is based on several factors and may vary in addition to a full range of medical, financial, and/or other benefits. Final salary and offer will be determined by the applicant’s background, experience, skills, internal equity, and alignment with geographical market data. Benefits Language (FTE roles): Full-time positions are eligible for our comprehensive and competitive benefits package including medical, dental, vision, and basic life insurance. Additional benefits include a 401k plan, paid time off, and an annual bonus. International SOS Government Medical Services complies with all federal, state, and local minimum wage laws. Equal Opportunity Employer (EEO) Statement: International SOS Government Medical Services is an equal opportunity employer and does not discriminate against employees or job applicants on the basis of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran in accordance with applicable federal, state, and local laws.

Job DescriptionSalary: A junior software developer collaborates with other developers to design and develop custom software solutions in a wide array of business verticals. Primary responsibilities are to learn project codebases, write and debug code under close supervision from senior developers, and participate in the analysis and composition of requirements. Should have familiarity with JavaScript, C#, or other common programming languages. Additionally, a junior software developer should be comfortable with using React, .NET, and other common frameworks to develop software for various platforms and the web. Work may include UI/UX design, programming, and capturing requirements. YOUR RESPONSIBILITIES • Create business information solutions by developing and maintaining software applications through the full software development life cycle., • Define project objectives by analyzing user requirements and envisioning system features and functionality., • Integrate applications by assessing system capabilities and establishing connectivity between disparate systems., • Work with clients to elicit requirements and workshop solutions QUALIFICATIONS • Bachelor's degree in computer science or a closely related field, or equivalent training / experience, • Excellent written and verbal communication skills and the ability to communicate ideas clearly and simply to clients, • Strong problem solving and analytical skills, with the ability to learn quickly, • Detail oriented with strong organizational skills, • Software development fundamentals (including object-oriented design, multi-layer design, debugging, etc.), • Flexibility to work on desktop, web or mobile applications TECHNICAL SKILLS • C#, • .NET, • JavaScript, • React, • Node.js, • CSS, • SPA architecture, • GraphQL, • Git, • T-SQL / MySQL, • Microsoft Visual Studio / Visual Studio Code, • Familiarity with Amazon Web Services or Microsoft Azure is a plus, • Familiarity with ASP.NET is a plus, • Microsoft Office SharePoint development experience is a plus, • Mobile development experience is a plus

Job DescriptionDescription: POSITION SUMMARY: The Maintenance Supervisor is responsible for supervising a maintenance shop that is under the umbrella responsibility of a Maintenance Manager. The Maintenance Supervisor's responsibilities include supervising a technician (mechanic) team responsible for preventive maintenance/repair of a fleet; machinery that supports a post-collection facility; repair/maintenance of equipment that services the container shop; and providing direction to technicians to ensure that all repairs/maintenance to equipment (trucks -- diesel and alternate fuel, containers and other heavy duty equipment) are performed in compliance with Company safety and compliance standards, and with all federal and state regulations. The Maintenance Supervisor is responsible for planning and scheduling repair work for the work group to ensure that all work is done in a safe and timely manner, reducing lost productivity. PRINCIPAL RESPONSIBLITIES: • Provide direction to A, B and C level, and lead technicians assigned to work group to ensure that all repair and maintenance work is performed in a safe, efficient and timely manner., • Monitor operational performance and efficiency and take action to redirect activities appropriately., • Report to management on performance; make recommendations for process/programmatic changes for improvement or efficiencies., • Supervise technicians in maintenance shop, including such responsibilities as conducting daily shop huddles; fleet walks; coaching/counseling/ training lead technician and all technician levels on performance/corrective action, when necessary; make hiring/termination decisions in concert with Human Resources and appropriate management; conduct employee training and performance evaluations; evaluate and make recommendations for merit increase, promotion and job changes, as appropriate., • Perform inspections of outside repairs to ensure all work was properly completed in accordance with Company's safety and compliance procedures and federal and state regulations; follow up where appropriate., • Identify training opportunities and, as necessary, document issues and constructively discuss corrective action, as needed, with technician., • Conduct Quality Control Inspections, track issues and resolution to ensure all work is properly completed in accordance with Company's safety and compliance procedures and federal and state regulations., • Oversee repair diagnostics on more complex matters and provide coaching, where necessary; may be required to road test vehicles to determine necessary repairs., • Oversee maintenance shop inventory control system to ensure necessary equipment and parts levels are maintained and purchases are within budget. Review and approve expenses that are within scope of approval level; refer larger expenses or major repairs to manager as appropriate., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems to perform advanced preventive and repair maintenance functions on heavy equipment and vehicles used by Company, on site and on the road, including: engine chassis repair and maintenance; knowledge of vehicle body control systems, including hydraulics and electrical systems to maintain and repair vehicles in a timely and safe manner; knowledge of heating and air conditioning systems to effectively diagnose and repair complex heating and cooling systems in vehicles in a timely and safe manner; and knowledge of welding tools to fix heavy equipment in a safe and efficient manner to ensure equipment is back in an operable condition as quickly and as safely as possible., • Manage related administrative matters for team, including payroll, maintenance of employee records, records of all preventive and corrective maintenance performed, recording of all information into Dossier Maintenance Software, prepare and submit budget for approval, set departmental goals to align with targets and performance objectives established by division's leadership. QUALIFICATIONS: • High school diploma or G.E.D., • Automotive Service Excellence (ASE) Certification, • T3 Drive., • T4 Brake., • T5 Suspension and Steering., • T6 Electrical/Electronic., • T7 HVAC Systems., • ASE T2 Diesel Engine., • ASE T Master Certified. MINIMUM REQUIREMENTS: • 5 years of experience in maintenance working with heavy equipment., • 1 year of supervisory experience in a lead technician role, supervisor or other management role requiring a thorough knowledge of safe working practices, DOT, OSHA and other federal and state regulations. Requirements:

Bearings Plus is the aftermarket arm of Waukesha Bearings and are an industry leader in the repair, replacement and upgrade of fluid film bearings and seals. With the most advanced analytical expertise and precise manufacturing capabilities in the industry, Bearings Plus can provide expert solutions to the greatest rotating equipment challenges. Waukesha and Bearings Plus are part of Dover Precision Components and ultimately Dover Corporation, who have annual revenues of over $8 billion. THE POSITION We are looking for a dynamic Quality Supervisor to establish BPI's quality assurance system and team, directly influencing customer satisfaction and site financial performance. You will be the driving force behind our continuous improvement efforts and defect reduction initiatives, establishing a robust and effective Quality Management System (QMS).This role requires a leader who can educate and train employees, inspire a culture of quality, and implement improvement activities such as Kaizen and Six Sigma to elevate the performance of DPO's value streams. WHAT YOU WILL BRING Education: • A Bachelor's degree in Mechanical, Industrial, Manufacturing, or Quality Engineering is highly preferred, • Significant experience (6-10+ years) in a relevant manufacturing environment may be considered in lieu of a degree.\nExperience:, • Minimum of 5 years of experience in quality control and/or quality assurance within a manufacturing or engineering environment., • Minimum of 3 years of experience in a supervisory or leadership role., • Experience in a highly regulated sector (e.g., oil & gas, aerospace, nuclear) is essential., • Practical experience in a precision engineering environment, specifically with CNC machining (3 & 5 axis) and metal cutting processes., • Experience working directly with customers and suppliers to resolve quality issues and manage expectations. \nIndustry Standards Knowledge:, • Knowledge of industry-specific codes and standards, including ISO 9001, API Spec Q1/Q2, ISO 29001, ASME (e.g., B31.3, VIII, IX), and AWS D1.1.\nInspection & Testing Proficiency:, • Ability to read and interpret complex engineering drawings, blueprints, and technical specifications, including Geometric Dimensioning and Tolerancing (GD&T)., • Proficiency with standard inspection equipment (e.g., micrometers, calipers, gauges, comparators) and coordinate measuring machines (CMM).\nQuality Management Systems (QMS):, • Strong understanding and experience with implementing, maintaining, and auditing QMS requirements (e.g., ISO 9001, AS9100)., • Experience with root cause analysis (RCA) and problem-solving methodologies (e.g., 5 Why, 8D, Fishbone, FMEA) to implement effective corrective and preventive actions (CAPA)., • Knowledge of statistical process control (SPC), control charts, and quality improvement methodologies like Lean Manufacturing and Six Sigma (Green Belt or Black Belt certification is a plus). \nLeadership and Soft Skills:, • Leadership and Communication: Proven ability to supervise, mentor, and motivate a team of quality inspectors and engineers. Must have excellent communication skills to liaise with all levels of staff, management, and external clients., • Problem-Solving: Strong analytical and troubleshooting skills to identify quality issues and drive data-driven solutions., • \nSystem Leadership: Develop, implement, manage, and integrate a comprehensive QMS for DPO, serving as the primary quality control resource for problem identification, resolution, and continuous improvement., • \nProcess Excellence: Design, implement, and document procedures for process control, improvement, testing, and inspection. Establish and implement key metrics (process capability, control charts) to monitor system effectiveness and support data-driven decisions., • \nProblem Solving: Lead root-cause analysis and problem-solving activities to identify and implement effective corrective actions and sustainable process improvements., • \nStakeholder Management: Interface with customer and supplier quality representatives, manage vendor performance, and ensure all purchase orders, contracts, and change requests align with stringent quality provisions., • \nTeam Management: Manage quality control personnel on a day-to-day basis, participate in engineering projects to represent quality assurance, and report key quality trends and losses directly to management.\nMORE ABOUT OUR COMPANY Bearings Plus are part of Dover Precision Components, who deliver performance-critical solutions for rotating and reciprocating machinery across the oil & gas, power generation, marine, industrial, chemical and general processing markets. Ensuring optimum efficiency, reliability and productivity in even the most challenging operating environments with a portfolio of custom-engineered, precision-manufactured products, we are backed by robust research & development and comprehensive aftermarket services. The Dover Precision Components portfolio includes hydrodynamic bearings, active magnetic bearings, system and bearing protection, and reciprocating compressor components - from renowned brands with unrivalled technology and application expertise. Facilities in North America, Europe, Asia and the Middle East, supported by a network of technical sales representatives, enable us to take a globally interconnected approach to serving our customers' global and local operations. Our team is committed to safety, quality and continuous improvement in all that we do. We are part of Dover Corporation overall, who are a diversified global manufacturer and solutions provider with annual revenue of approximately $8 billion. We deliver innovative equipment and components, consumable supplies, aftermarket parts, software and digital solutions, and support services through five operating segments: Engineered Products, Clean Energy & Fueling, Imaging & Identification, Pumps & Process Solutions and Climate & Sustainability Technologies. Dover combines global scale with operational agility to lead the markets we serve. Recognized for our entrepreneurial approach for over 65 years, our team of over 25,000 employees takes an ownership mindset, collaborating with customers to redefine what's possible. Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." #LI-KZ1 Nearest Major Market: Houston Job Segment: Six Sigma Black Belt, Six Sigma, R&D Engineer, QA, QC, Management, Engineering, Quality

About ITT: ITT is a leading manufacturer of critical components for harsh environments that serves fast-growing end markets in flow, aerospace and defense, energy and transportation. Building on our heritage of innovation, we partner with our customers to deliver solutions to the key industries that underpin our modern way of life.Headquartered in Stamford, CT, we have more than 11,700 employees globally with operations in ~40 countries and sales in more than 125. At our core is our engineering DNA, with 1,280+ engineers, 1,700+ active global patents and ~51 manufacturing locations. Our businesses are organized in three distinct segments, each based around our core engineering DNA: Industrial Process: A global leader in centrifugal and twin-screw pumps and engineered valves for chemical, energy, mining, and industrial applications. Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Bornemann, Habonim, Engineered Valves, Rheinhütte Pumpen and Svanehøj. Motion Technologies: A global leader in brake pads (ICE and electrified brake pads) and shock absorbers (energy absorption solutions) for transportation applications. Our leading brands include Friction Technologies, KONI and Axtone. Connect and Control Technologies: A leader in critical applications for the aerospace, defense and industrial markets, including harsh environment connectors and control components. Our leading brands include ITT Cannon, Enidine, Aerospace Controls and kSARIA. Position Summary We are seeking a Pump Mechanic/Inspector to support our aftermarket repair and upgrade business in our Houston PRO Services shop located in Stafford, TX. Building on centuries of pump design experience, PRO Services provides an array of services focuses on reducing equipment total cost of ownership and increasing plant output, including condition monitoring, predictive maintenance contracts, field service, engineered upgrades, inventory management, and overhauls for pumps and other rotating equipment. Essential Responsibilities May include: • Perform complete disassembly and reassembly of centrifugal pumps, including multistage and high-energy units., • Conduct detailed dimensional inspections of critical components (shafts, impellers, sleeves, bearings, wear rings, casings) using precision measuring instruments., • Evaluate component condition and determine repair vs. replace decisions based on OEM specifications, tolerances, and operational requirements., • Troubleshoot mechanical issues independently and recommend effective repair solutions., • Develop detailed work scopes based on inspection findings, OEM specifications, and failure analysis, including material and repair recommendations., • Provide work scope and material requirements aligned with customer specifications and internal quality standards., • Measure, calculate, and set critical running clearances and tolerances (axial and radial) in accordance with OEM standards., • Perform precision assembly techniques, including proper torquing, interference fits, and use of heating/cooling methods where required., • Review and verify all running clearances prior to final assembly to ensure proper equipment performance., • Conduct final inspection of all machined parts (repaired or newly manufactured) to ensure accuracy, completeness, and compliance with specifications., • Perform final inspection of assembled equipment, record inspection data, and coordinate completion of documentation prior to shipment., • Safely perform and lead air and hydrostatic testing of equipment; interpret results and troubleshoot any issues identified during testing., • Ensure accuracy and completeness of all inspection sheets, drawings, and related documentation., • Report defects in materials, rework, missed inspections, job delays, and problem areas to applicable internal and external customers., • Mentor and provide technical guidance to lower-level mechanics in disassembly, inspection, troubleshooting, and assembly practices. Knowledge & Skills: • Excellent communication and interpersonal skills to interact effectively with diverse client group., • Ability to troubleshoot in-depth issues with rotating equipment., • Ability to read, analyze, and interpret pump drawings., • Ability to anticipate and solve practical problems and resolve issues., • Self-starter with the ability to work both independently and within a team., • Ability to effectively communicate ideas and properly describe problems and solutions., • Ability to work overtime hours, including weekends and holidays, as needed by customer demands and/or business needs., • Customer service mindset to ensure on-time delivery and quality workmanship., • Ability to effectively handle multiple tasks, time management, and prioritization skills., • Well-developed planning, organization, analytical, and decision-making skills, • Ability to produce clear, timely, and concise documentation and have well-developed problem-solving skills., • Ability to apply good judgment, strong work ethic, and integrity on the job., • Proficient in relevant PC skills., • Strong drive to make things happen and a strong "can do" attitude., • Knowledge of service environment activities including DCI, machining, assembly, test, and field service for rotating equipment., • Understand different materials and their properties., • Ability to work efficiently within the fixed time window for each manufacturing process., • Willingness to work on teams and engage in on going Continuous Improvements within facility.\n\nExperience:, • 10+ experience troubleshooting and repairing rotating equipment., • Experience in reading blueprints including GT&T, • Experience operating lifting devices, including cranes and forklifts\n\nEducation:, • High School Diploma or GED Equivalent, • Vocational/ Technical Degree preferred \n\nWork Environment: While performing the duties of this job, the employee is frequently required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to wear personal protective equipment - as required by PPE Assessment. The noise level in the work environment is usually noisy as most of the activity occurs in a machine repair shop environment. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. #LI-SJ1 Equal Pay Act Statement We aim to pay our 'ITT'ers' fairly and competitively in the locations that they live and work. Pay-for-performance is a principle that we believe in, and employees are rewarded based not only on 'what' they accomplish, but also on 'how' they reflect ITT's values. ITT offers a competitive salary and robust total rewards package, such as health insurance, 401(k), short and long-term disability, paid time off, growth and developmental opportunities, and other incentive compensation programs. Specific benefits are dependent upon whether or not the position is part of a collective-bargaining agreement. The salary offered to a candidate is based several factors such as candidate experience and qualifications, location, as well as market and business considerations. Equal Pay Act Range Between $30.91 and $46.20

Job Description ⚡ The Opportunity You've Been Waiting For! Senior Operations Accountant EPC | Project Accounting | Financial Operations 📍 Houston, TX | 🏗️ EPC / Construction / Engineering Services 🌟 Why This Role Matters At our powerhouse client, their projects don’t just deliver infrastructure — they deliver results. We’re looking for a Senior Operations Accountant who thrives in project‑based environments and loves turning complex cost data into clear financial insight. You’ll be embedded with Project Management and Operations, owning job cost accuracy, supporting critical closes, and ensuring leadership has the data needed to make smart, timely decisions across the project lifecycle. 🔧 What You’ll Do 📊 Financial Close & Reporting • Prepare and post journal entries for labor, materials, subcontractors, equipment, inventory, and accruals, • Perform monthly balance sheet reconciliations and resolve variances, • Support monthly, quarterly, and annual close cycles, • Deliver project‑level reporting (cost, margin, and variance analysis), • Maintain accurate job cost accounting in ERP systems, • Assist with cost‑to‑complete updates and percent‑complete (ASC 606) calculations, • Analyze project variances and partner with Project Managers to resolve drivers, • Support project setup, budgeting, forecasting, and closeout, • Support progress, milestone, and T& M billing, • Reconcile billed revenue to project records and the G/L, • Track change orders and contract modifications, • Support compliance with prevailing wage, certified payroll, and labor regulations, • Assist with sales/use tax tracking in coordination with Tax and Payroll, • Maintain audit‑ready documentation and internal controls, • Identify process gaps and drive continuous improvement, • Protect ERP integrity and job cost reliability 🎓 What You Bring ✅ Required • Bachelor’s degree in Accounting or Finance (CPA or Master’s preferred), • 5+ years of project accounting experience (EPC, construction, or engineering strongly preferred), • Strong knowledge of GAAP, contract accounting, ASC 606, percent‑complete, • Experience in fast‑paced, deadline‑driven project environments, • Hands‑on ERP/project accounting experience, • Strong analytical, organizational, and communication skills, • Process improvement mindset (Lean / Six Sigma a plus), • Comfortable working independently and cross‑functionally, • Experience with Microsoft Great Plains or similar ERP systems 🚀 Why You’ll Love Working Here • High‑impact role with real visibility into project performance, • Collaborative, operations‑focused finance team, • Exposure to complex EPC projects, • Opportunity to influence processes, controls, and decision‑making 👉 Ready to power projects with insight and precision? Apply today and bring your project accounting expertise to take your career to the next level!

Job Description Job Title: TRAVEL CNC Machinist Project located in Anoka MN $34-40hr + $2 shift differential + $171 per diem days worked There will be a virtual interview, and can start within a week 6+ month contract Up to 64 hours a week Openings: 1 Horizontal Mill on 2nd shift 1 Vertical Lathe on 2nd shift Job Description This role focuses on producing short-run, large-part components on CNC lathes using Fanuc controls. You will manage the full machining process from blueprint interpretation and machine setup to machining and inspection, ensuring high-quality parts in a deadline-driven machine shop environment. Responsibilities • Set up CNC lathes with Fanuc controls for short-run production of larger parts, including tooling, offsets, and program selection., • Interpret and work from blueprints and technical drawings to determine machining operations, dimensions, and tolerances., • Program or edit programs at the machine using G and M codes to achieve the required features and dimensions., • Operate CNC lathes to machine large components, using either vertical or horizontal turning experience as applicable., • Perform in-process inspection of your own parts using micrometers, calipers, and other precision measuring tools to verify dimensions and tolerances., • Apply GD&T principles during setup, machining, and inspection to ensure parts meet geometric and dimensional requirements., • Document and communicate any issues related to quality, tooling, or machine performance to maintain consistent output., • Maintain a clean and safe work area, following all required PPE and safety procedures in a machine shop environment., • At least 5 years of experience performing complete setups on CNC lathes with Fanuc controls., • Experience machining larger parts, with a minimum of 1 year working with large components., • A minimum of 5 years of experience checking your own parts using micrometers and calipers during the machining process., • At least 5 years of experience or relevant education in GD&T, with the ability to demonstrate this knowledge in testing., • Proficiency with Fanuc controls, including program setup, operation, and adjustments., • Ability to read and interpret blueprints and technical drawings accurately., • Experience with G and M code programming and editing at the machine., • Strong attention to detail and commitment to producing high-quality parts., • Experience with vertical or horizontal turning on CNC lathes., • CMM experience for part inspection is a plus., • Top-of-class technical school graduates with hands-on CNC experience and strong interest in vertical turning may be considered., • Solid understanding of machining principles, tooling, and workholding for large parts., • Strong problem-solving skills for troubleshooting machining and quality issues. You will join a professional machine shop that values craftsmanship and precision, where quality consistently takes priority over speed. The environment encourages the use of modern CNC technologies and continuous development of technical skills, especially in complex turning and GD&T. You can expect clear expectations, structured processes, and the opportunity to work on challenging large-part projects that build your expertise and career in advanced machining. Work Environment This is a production machine shop environment with CNC lathes and related inspection equipment. The culture is deadline intensive, yet strongly focused on quality over speed. Employees wear company-issued uniforms and must follow all required PPE and safety protocols typical of a machining facility. You will work around large parts, CNC equipment, and precision measuring tools such as micrometers, calipers, and potentially CMMs. Job Type & Location This is a Contract position based out of Houston, TX. Pay and Benefits The pay range for this position is $30.00 - $36.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCNC Machinist CNC Machinist Position Overview We are seeking a skilled CNC Machinist to program, set up, and operate CNC lathes and mills to produce precision components to specification. The ideal candidate will read and interpret blueprints, write and optimize G-code, apply GD&T principles to ensure part conformity, and perform quality inspections using precision measuring tools. This role supports production targets while maintaining safety and continuous improvement. Key Responsibilities • Set up, program, and operate CNC lathes (and mills as needed) to meet production schedules and quality specifications., • Read and interpret engineering drawings and blueprints to determine machining requirements and tolerances., • Create, edit, and optimize G-code programs to improve cycle times, reduce scrap, and maintain tool life., • Apply GD&T principles to ensure parts meet dimensional and geometric tolerances., • Perform in-process and final inspections using calipers, micrometers, gauges, and CMMs; document inspection results and maintain quality records., • Troubleshoot machining issues, make necessary adjustments to tooling, feeds, and speeds, and report recurring problems., • Maintain machine cleanliness, perform routine maintenance, change tooling, and follow lockout/tagout procedures., • Collaborate with engineers, quality, and production teams to resolve non-conformances and implement corrective actions., • Follow safety protocols, maintain a clean work area, and adhere to company quality and safety standards.Qualifications, • 3+ years of hands-on experience operating and programming CNC lathes; experience with CNC mills is a plus., • Strong ability to read and interpret blueprints and engineering drawings., • Proficient in writing and editing G-code; familiarity with CAM software is beneficial., • Working knowledge of GD&T and applying geometric tolerances to machined parts., • Experience using precision measurement tools (calipers, micrometers, height gauges) and performing first-article inspections., • Technical diploma or certificate in machining, manufacturing technology, or equivalent on-the-job experience., • Strong problem-solving skills, attention to detail, and the ability to work independently and as part of a team., • Basic computer skills and experience with shop floor documentation and production tracking systems., • Comprehensive Medical, • 401K, • Tuition Reimbursement, • Vacation, PTO, and holidays, • Gym reimbursement - For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/29/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.Everforth CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. Everforth CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. Everforth CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionJoin the ECI Group's Professional Technical Services Network as a Principal Data Engineer. This is a Houston based a six-month contract role with an anticipated March 30, 2026 start date and ending on September 30, 2026. NOTE: You must be a US Citizen or Permanent US resident to qualify for the position. Roles and Responsibilities: The Principal Data Engineer is the one who conceptualizes and designs data foundations and end to end solutions including data platforms for the Shell Business to maximize value from data. The role helps create a data-driven thinking within the organization, not just within IT teams, but also in the wider business stakeholder community. A Principal Data Engineer is expected to be a subject matter expert, and an active thought partner in the organization's data strategy and the key driver to define the Vison and Data Strategy for robust and future ready IT solutions Role Objective This is not a standard data engineer role. We are looking for a deeply technical, hands-on individual contributor who can: • Diagnose performance, latency, and cost issues in a large-scale cloud data platform, • Take a top-down, platform-level view across multiple projects, • Improve architecture, efficiency, and cost optimization, not just write Spark code, • Act as a technical problem-solver and mentor, guiding other data engineersThis person is expected to make the platform better, not just execute tasks. Current Platform & Architecture Data Flow: • On-premise systems → Cloud (Azure), • Streaming ingestion → Azure Data Lake Storage (ADLS), • Data processed into two separate containers:, • Crude trading, • Product tradingTechnologies in Use:, • Qlik Replicate (formerly Attunity), • Streaming data from on-prem to Azure, • Azure Data Lake Storage (ADLS), • Databricks, • Delta Live Tables (DLT), • Spark / PySpark, • Python 1. Data Latency • High-volume streaming data, • End-to-end latency issues that need root-cause analysis2. Databricks / DLT Cost Spikes, • DLT costs are far higher than expected, • Known contributors:, • Very high data volume (expected), • Inefficient lookup logic used to split data into separate containers, • The current solution works but is not optimalNote: This role exists because generic recommendations are not enough. Key Characteristics • Hands-on technical delivery leader, • Visible community leader for data engineers, • Conducts quality, community & conference presentations/trainings, • Has vast array of technology skills with deep expertise in at least 2 core technologies (Azure, AWS, SAP), • A skilled communicator capable of speaking to both technical developers and business managers., • Able to drive change and improvement through a deep understanding of the inter-relationship between People, Process, Data and Technology, • Coordinate the change management process, incident management and problem management process., • Drive implementation efficiency and effectiveness across the pilots and future projects to minimize cost, increase speed of implementation and maximize value delivery., • Drives & contributes to community building initiatives like CoE, CoP.Mandatory skills:, • AWS/Azure/SAP – Master, • ELT – Master, • Data Modeling – Master, • Data Integration & Ingestion – Master, • Data Manipulation and Processing – Skill, • GITHUB, Action, Azure DevOps – Skill, • Data factory, Databricks, SQL DB, Synapse, Stream Analytics, Glue, Airflow, Kinesis, Redshift, SonarQube, PyTest – SkillProgramming & Data Skills, • Strong Python (mandatory), • PySpark (advanced, not basic), • Advanced SQL, • Complex queries, • Stored procedures, • Analytical logicOptional skills:, • Experience in project management, running a scrum team., • Experience working with BPC, Planning., • Exposure to working with external technical ecosystem., • Managing small teams. Please Note: The ECI Group uses AI‑assisted tools in the early stages of application review, with all decisions guided by human oversight and fully compliant with General Data Protection Regulation (GDPR) and ECI Group’s applicable data protection policies and Privacy Notice. Bottom of Form Powered by JazzHR tC8fKTz5bk

Job DescriptionCNC MachinistPay $20-$25 First Shift: Mon-Fri 6am to 2:30pm CNC Machinist SummaryWe are seeking a CNC Machinist to join our production team. In this hands-on role, you will be responsible for setting up, operating, and monitoring CNC lathes to produce precision plastic parts that meet tight tolerances and high-quality standards. You will interpret blueprints, set machine parameters, load programs, and perform measurements to ensure parts meet specifications. CNC Machinist Responsibilities • Operate and monitor CNC lathes to machine precision parts according to work orders and blueprints, • Load raw materials, run production parts, and unload finished components, • Read and interpret blueprints, work instructions, and setup sheets to determine part requirements, • Load CNC programs and set tools, offsets, speeds, and feeds as directed, • Select, measure, install, and secure tools and attachments with minimal supervision, • Independently verify dimensions using calipers, micrometers, gauges, and other precision instruments, • Edit and adjust CNC programs or controls to correct minor errors or optimize performance, • Maintain machines, replace worn tools, and perform basic preventive maintenance, • Complete required production documentation and in-process inspection checks, • Maintain a clean, organized work area in compliance with safety and PPE requirements, • Communicate promptly with supervisors regarding machine or quality issues, • Assist with material handling, tooling changes, and other production support tasks as neededCNC Machinist Qualifications, • High school diploma or equivalent, • 5+ years of CNC lathe machining experience, preferably working with plastics, • Proficiency in reading and interpreting blueprints, GD&T, and 3D CAD models, • Skilled in the use of calipers, micrometers, and precision gauges, • Experience with FANUC-controlled CNC machines and G-code programming, • Hands-on machining and setup experience, including prove-outs and troubleshooting, • Demonstrated ability to hold tight tolerances and meet SAE aerospace standards, • Experience machining materials such as PEEK and Teflon, • Additional machining experience with:, • Stainless steels (300 Series, Nitronic 60), • PH stainless steels (15-5, 17-4), • Aluminum bronze, • MP35N and Inconel

Job Description:\n\n Octagos is modernizing remote cardiac monitoring with AI-powered automation, seamless EHR integrations, and accuracy proven in high-volume, real-world clinics. Atlas AI™ triages cardiac device transmissions to filter nonactionable alerts and highlights the events that need true clinical attention. Through our Two-Brain Approach™ – combining Atlas AI™ with IBHRE-certified oversight – Octagos delivers 99%+ accuracy, sensitivity, and specificity for near-perfect clinical performance. With fast bi-directional EHR integrations, and flexible, cost-effective implementation, Octagos helps clinics scale care efficiently without compromise. Recognized by TIME and Statista as one of the World’s Top HealthTech Companies 2025, Octagos is redefining how cardiac care is delivered. Role Summary We are looking for a hands-on Database Administrator to own performance, reliability, and observability for our Azure SQL Server environment. Our database tier spans multiple schemas (production, Power BI reporting, analytics, ETL procedures, audit, support, and watchtower), supports 300+ stored procedures and views, and runs scheduled Azure Elastic Jobs. This role will proactively monitor database health, diagnose regressions, and lead advanced SQL tuning and indexing efforts to keep clinical workflows fast and dependable. The ideal candidate is not someone who simply keeps the lights on. We need a DBA who designs for query performance from day one, establishes SQL standards that prevent tech debt, and partners with application engineers to keep the full stack (SQL to C# EF to Angular) aligned, performant, and maintainable. You will set the standard for how the team writes, reviews, and optimizes SQL, with a strong focus on database health monitoring and advanced performance tuning.This is an In-Office position based in Houston, Texas. Key Responsibilities Data Architecture and Modernization Drive data architecture improvements (table decomposition, normalization) across core entities (Clinic, Patient, Device, Transmission).Rationalize andoptimizeviews: remove redundancy, flatten view-on-view chains, and improve optimizer effectiveness.Design read/write separation strategies, including Redis caching for high-read, low-write data (settings, lookups, device metadata).Optimizeanalytics/ETL stored procedures and Azure Elastic Jobs that drive reporting.Conduct proof-of-concept testing for schema changes (e.g., extension tables vs. EAV patterns) and present data-driven recommendations to engineering leadership with migration paths and rollback plans.Manage schema evolution usingDbUpmigrations, ensuring backward compatibility, zero-downtime deployments, and a documented blast-radius assessment for every migration that touches dependent stored procedures, views, Entity Framework models/mappings, and Angular interfaces.Maintain a living data dictionary and entity relationship documentation covering all schemas (dbo,pbi, analytics, audit, support, watchtower), key tables, column-level lineage, and cross-schema dependencies. Performance Tuning and Query Optimization Lead continuous performance tuning and database health monitoring– Identify and resolve slow queries, blocking, deadlocks, and resource bottlenecks before they impact clinical operations. Analyze execution plans, leverage Query Store for regression detection, and maintain index health (rebuild/reorganize schedules, statistics freshness) across high-volume tables including Transmission,Transmission Status Map, Patient, and Patient Device Information.Develop and maintain an index strategy covering clustered, non-clustered, filtered, and covering indexes. Evaluate indexed views for high-read-frequency reporting views. Track index usage stats and remove unused indexes that add write overhead.Partner with .NET engineers to optimize Entity Framework (EF) data access patterns: review generated SQL,eliminateN+1 query patterns, tune projections and includes, and ensure parameterization/type alignment to preserve index seeks.Optimize Hangfire job-related queries and the analytics ETL pipeline to ensure scheduled jobs complete within their time windows without competing for resources with real-time portal queries.Enforces argable query patterns by identifying and refactoring anti-patterns such as functions on indexed columns in WHERE clauses, cursors used for row-by-row processing, SELECT * in stored procedures, and NOLOCK hints applied without DBA approval.Own tempdb contention management: identify procedures creating excessive temp table churn, recommend CTE or table variable alternatives for small datasets, and monitor tempdb allocation wait stats.Run periodic performance reviews (top queries, waits, plan regressions/parameter sniffing) and deliver actionable remediation plans. Standards, Best Practices and Governance Define and enforce stored procedure standards across the engineering team: SET NOCOUNT ON, SET XACT_ABORT ON with transactions, TRY/CATCH error handling, proper parameterization, pagination with OFFSET/FETCH or keyset, and the standards naming convention. Author and maintain a SQL development style guide covering naming conventions for all object types (stored procedures, views, functions, indexes, schemas), parameter design, error handling patterns, transaction scoping rules, and comment/documentation requirements. Enforce standard active-record filters across all data-access objects and build automated checks to detect missing filters in new or modified stored procedures. Establish code review standards for all SQL changes: require execution plan review for any query touching high-volume tables, mandate index impact assessment for schema migrations, and enforce consistent use of time zone conversion patterns (AT TIME ZONE) for SessionDate display. Implement anti-pattern detection as part of the CI/CD pipeline or periodic audit: flag cursors, SELECT *, missing SET NOCOUNT ON, string-concatenated dynamic SQL, functions on indexed columns in WHERE clauses, and transactions wrapping read-only queries. Enforce cross-layer data structure alignment: SQL column types/nullability must match C# DTO/entity properties, EF mappings must stay in sync with schema changes, and enum/lookup table values must remain synchronized across SQL, C#, and Angular. Govern the analytics schema pattern, create and maintain stored procedure and view templates that the engineering team can use as starting points, ensuring every new database object follows established patterns from day one. Database Operations and Reliability Administer and monitor MySQL and Azure SQL databases across development, staging, and production environments, ensuring 99.9%+ uptime for a platform that processes cardiac device transmissions around the clock. Manage capacity planning, elastic pool sizing, and Azure SQL tier optimization, balancing performance against cost as clinic onboarding accelerates. Own backup and restore strategies, point-in-time recovery testing, and disaster recovery runbook maintenance for databases containing PHI. Monitor and triage performance alerts using Azure Monitor, Application Insights, and custom OpenTelemetry telemetry dashboards. Coordinate maintenance windows for index rebuilds, statistics updates, and schema migrations with zero downtime to clinical operations. Security, Compliance, and Access Control Implement and enforce HIPAA-compliant data access controls, auditing, and encryption (TDE, Always Encrypted where applicable) across all schemas. Manage database-level permissions, row-level security, and service account credentials in alignment with SOC 2 Type II requirements. Ensure PHI never appears in stored procedure PRINT/RAISERROR messages, dynamic SQL trace outputs, plan cache, error messages, or URL parameters. Participate in security audits, vulnerability remediation, and PHI exposure assessments at the database tier. Security Data Quality and Observability Execute and extend the data quality playbook including automated SQL checks, KPIs, and remediation runbooks that monitor data integrity across the Clinic, Patient, Device, Transmission hierarchy. Build and maintain database health dashboards covering query performance, wait statistics, DTU/vCore utilization, job success rates, tempdb contention, and blocking/deadlock trends. Instrument custom telemetry events at the database layer integrated with the platform’s OpenTelemetry and Application Insights observability stack. Collaboration and Documentation Serve as the database subject-matter expert across the engineering organization, supporting US (Houston) and India development teams. Contribute to architecture decision records (ADRs) for database-impacting changes, including schema migrations, index strategies, and caching layer design. Document database objects, data flows, schema dependencies, stored procedure inventories, and operational runbooks in the team wiki (Azure DevOps Wiki / GitHub Wiki). Participate in sprint ceremonies, root-cause analysis (RCA) reviews, and cross-functional working sessions with application engineers, QA, and the data team. Required Qualifications 10+ years of experience as a DBA or Senior DBA, with at least 2 years managing Azure SQL Database or Azure SQL Managed Instance in a production SaaS environment. Proven track record of designing and evolving data architectures: table decomposition, schema normalization, denormalization strategies for reporting, and migration planning across hundreds of dependent database objects. Deep expertise in T-SQL performance tuning: execution plans, index strategies (clustered, non-clustered, filtered, covering, indexed views), wait statistics, Query Store, parameter sniffing diagnosis, and Resource Governor. Strong experience with stored procedure development following structured patterns (SET NOCOUNT ON, TRY/CATCH, parameterized queries, pagination with OFFSET/FETCH or keyset) and the ability to establish and enforce these standards across a team. Ability to optimize complex views with 10 to 15+ joins, diagnose nested view performance degradation, flatten view-on-view chains, and recommend indexed view strategies for high-read workloads. Experience authoring SQL development standards, style guides, and review checklists that are adopted by application engineering teams. Hands-on experience with Azure database services: elastic pools, geo-replication, automated backups, threat detection, auditing, and cost optimization. Solid understanding of HIPAA technical safeguards, encryption requirements, and audit logging for healthcare data at the database tier. Experience with CI/CD-based schema migrations (DbUp, Flyway, or similar) and the discipline to assess blast radius across dependent stored procedures, views, and application-layer DTOs before every migration. Experience partnering with .NET engineers using Entity Framework (EF) in production systems, including understanding how LINQ patterns translate to SQL and how to avoid common performance pitfalls (N+1 queries, over-fetching, missing indexes). Strong written and verbal communication skills; comfortable collaborating with a distributed engineering team across US and India time zones and presenting architecture recommendations to engineering leadership. Preferred Qualifications Experience in healthcare SaaS, particularly with cardiac remote monitoring, medical devices, or clinical data workflows involving PHI. Experience leading data architecture modernization projects: table decomposition, schema refactoring, ETL pipeline redesign, or data warehouse/reporting layer buildout. Track record of authoring and enforcing SQL development standards across a multi-team engineering organization. Familiarity with Power BI Embedded and writing DAX-optimized SQL views including CTE latest-run consumption patterns. Exposure to Hangfire or similar job scheduling frameworks and their database footprint (table locks, cleanup, dashboard queries). Experience administering databases that support RPA/automation workflows with high-frequency insert/update patterns. Azure certifications (AZ-900, DP-300, or AZ-500) are a plus. Experience with SOC 2 Type II audit preparation and evidence collection at the database tier. Technology Environment Layer Technologies Database Azure SQL Server (dbo, pbi, analytics, audit, support, watchtower schemas), SSMS, Azure Data Studio Backend API .NET 8 / C# with Entity Framework (EF), ASP.NET Core Web API Migrations DbUp, Azure Elastic Jobs ETL / Reporting Analytics, ETL patterns, Power BI Embedded Caching Redis Observability Azure Monitor, Application Insights, OpenTelemetry, custom dashboards CI/CD GitHub, Azure DevOps Auth Auth0 with role-based access control, clinic-level data isolation Compliance HIPAA, SOC 2 Type II Compensation and BenefitsPaid Time OffHealth, dental, and vision insuranceCompetitive salary commensurate with experienceOpportunity to shape a critical function at a growing healthcare technology company

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Engineering Tech II to join us in Missouri City, TX! The Engineering Tech II is responsible for developing and optimizing manufacturing documentation and processes to support efficient and compliant assembly operations. The position collaborates closely with engineering teams to translate technical concepts into clear, actionable work instructions, training materials, and design documentation. The incumbent ensures adherence to Good Manufacturing Practices (GMP), supports prototype development, and contributes to continuous improvement initiatives across product design and manufacturing. Essential Duties and Responsibilities: • Develop and maintain Work Instructions and Operational Method Sheets (OMS) using text, images, and drawings to guide assembly technicians., • Create and streamline manufacturing documentation, including training materials, to support efficient production workflows., • Implement GMP standards within assembly processes and ensure documentation reflects compliance requirements., • Participate in engineering design reviews, providing constructive feedback and technical input., • Support engineering activities including design, testing, diagnostics, and prototype modifications., • Interpret schematics, block diagrams, and verbal instructions to perform testing and troubleshooting., • Generate accurate assembly drawings and Bills of Material (BOM) using SolidWorks and Pro-Engineer., • Develop CAD models and detailed part drawings from sketches, layouts, and design specifications., • Apply principles of design for manufacturability, cost-efficiency, and testability., • Conduct testing using engineering methodologies such as design of experiments and data analysis., • Perform hands-on electro-mechanical assembly and support NPI (New Product Introduction) efforts., • Execute tasks in controlled or cleanroom environments as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Knowledge, Skills and Abilities: • Proficiency in SolidWorks and Pro-Engineer for component and system design., • Basic understanding of mechanical design principles, drawing standards, and GD&T., • Experience with electro-mechanical assembly and prototype manufacturing., • Ability to work from technical documentation and verbal instructions., • Familiarity with NPT and compression fitting installation and testing., • Strong attention to detail and commitment to quality and accuracy., • Effective communication skills and ability to collaborate across teams., • Ability to work in cleanroom or controlled environments., • Experience developing manufacturing documentation and training materials., • Knowledge of GMP and its application in manufacturing environments., • Demonstrated initiative and ownership in task execution., • Experience supporting design for manufacturability and cost optimization., • Prior involvement in design reviews and engineering collaboration. Educational/Certification Requirement: • High School Diploma or equivalent required; actively pursuing college courses for an engineering degree is given high consideration. Experience Requirement: Work Experience:

Job Description CNC Tube Bending Technician Houston, TX About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With multiple NASA lunar missions in development and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. About the Position: Intuitive Machines is seeking a CNC Tube Bending Technician to join our team. The CNC Tube Bender and Inspection Technician is responsible for operating, setting up, and monitoring CNC tube-bending equipment used in the production of aerospace tubing assemblies. This role also performs in-process and final dimensional inspections using precision measurement tools and inspection equipment to ensure all products meet engineering specifications and aerospace quality requirements. The ideal candidate is detail-oriented, mechanically inclined, and committed to producing high-precision components in a fast-paced manufacturing environment. A candidate for this position will be encouraged to take on as much responsibility as practical and will be expected to play a role in the manufacturing and implementation of parts that will support or be part of the Lunar program. This includes but is not limited to the Lunar Lander, Satellites, Payloads support, Test and Verification and others. Responsibilities: • Set up,operate, and adjust CNC tube-bending machines to produce tubes and assemblies per engineering drawings and work instructions., • Perform part measurements using inspection tools such as calipers, micrometers, height gauges, CMM/laser scanning systems, bend check fixtures, or other precision equipment., • Interpret engineering drawings, bend data sheets, and GD&T requirements to ensureaccurateand compliant part production., • Monitor machine performance, make minor program or tooling adjustments, and escalate issues when necessary., • Perform first-piece, in-process, and final inspections to verify dimensional accuracy and bend quality., • Document process data, inspection results, and part traceability in travelers, logs, or digital systems., • Conduct routine machine maintenance, including lubrication, tool changes, and general upkeep., • Identifynonconforming conditions, report issues to quality or engineering, andassistin corrective actions when needed., • Ensure proper handling of aerospace tubing materials to prevent contamination, damage, or deformation., • Maintaina clean, organized, and FOD-controlled work environment., • High school diploma or equivalent., • 1–3 years of experience operating CNC equipment, tube benders, or similar machinery., • Ability to read and interpret engineering drawings, bend schematics, and basic GD&T, • Strong mechanical aptitude and troubleshooting skills., • Experience using standard inspection tools (calipers, micrometers, height gauges, etc.)., • Ability to follow detailed work instructions and maintain accurate documentation., • Comfortable working with metal tubing, precision components, and production machinery., • Experience in aerospace manufacturing, tubing fabrication, or high-precision production., • Familiarity with CNC tube-bending software or controls (e.g., Eaton Leonard, Horn, BLM)., • Experience with laser tube measuring systems, CMMs, or automated inspection equipment., • Knowledge of GD&T, bend compensation, spring-back characteristics, or tube-forming principles. Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Base salary of $60,000-$65,000. Potential yearly Bonus: $6,500 ($500 per period) Job Qualifications • Valid Food Manager's Certificate, • Valid TABC Certificate, • A minimum of 3 years of full-service kitchen experience in a similar role Medical, Dental, Vision, and Life Insurance after 60 days of hire. 10 days PTO (80 hours per calendar year) Perks Include: Flexible Scheduling! Paid On-the-Job Training! Advancement Opportunities (promotions from within)! Jeans and T-Shirt uniform, tattoos and piercings are totally accepted! A Day In The LifeYou'll ensure the kitchen staff follows all our policies, including food preparation guidelines. You'll order supplies and monitor inventory levels to ensure we're always fully stocked on what's needed for each shift. And you will schedule shifts so that everything runs smoothly! The Kitchen Manager oversees daily operations by ordering stock and monitoring inventory levels while watching food preparation procedures & standard recipes and waste control. • Creates weekly cook and dough schedules to accommodate business flow needs, • Create schedules and track labor, • Follows the Via 313 recipe book with exactness and precision, • Leads weekly back-of-house meetings and schedules shift manager & trainer meetings as needed, • Works closely with and trains cooks and other workers in the preparation, cooking, and presentation of the food to Via 313 standards, • Monitors training processes and meets regularly with trainers to discuss staff member progress and goals, • Leader in quality control, food safety procedures, and restaurant food safety guidelines, • Checks and maintains proper food holding and refrigeration temperature control points. Monitors and enforces the use of temperature log, • Supervises and coordinates activities of cooks or workers engaged in food preparation, • Maintains back-of-house facilities and equipment to uphold the safety and cleanliness standards of the brand. Communicates with the General Manager when these standards cannot be met for any reason., • Oversees all product orders and products received, • Controls food cost and usage by following proper requisition of products from storage areas, product storage procedures, standard recipes, and waste control procedures, • Performs other duties as required by upper management Job Requirements: • Extraordinary attention to detail, • Excellent verbal and written communication, • Collaborative, growth mindset and partnership-oriented, • Excellent problem solving and conflict management abilities, • Ability to multitask and complete tasks in a timely, accurate manner, • Willingness to attend training and obtain certifications as needed, • Food handlers permit, • Regular and predictable attendance Who We Are Via 313 via meaning by way of and 313 being the area code of Detroit. By way of Detroit. Our founders, Brandon and Zane Hunt, are born and bred scions of the Motor City, and have brought with them the best of their hometown. Via 313 is steeped in a deep sense of place, and we d like you to feel at home. On December 8, 2011, the Hunts opened Via 313 Pizza out of a small & nondescript trailer on East 6th and Waller with the dream of bringing Detroit-style pizza to people from all over. Here at VIA 313 we make genuine, Detroit-style pizza for our family and friends. We take pride in having studied the best pizza our hometown has to offer. We take special care to use only the finest ingredients. Our pizzas are built right, to the last bite it s our guarantee. We are committed to creating a rare culture that allows for creative thinking, learning, and growth opportunities. We use eVerify to confirm U.S. Employment eligibility.

Job Description Manual Machinist (Temp-to-Hire) Location: Pasadena, TX 77507 Pay: $30-$40/ DOE Shift: 7am-4pm M-F, O-T as needed (40-70 hrs/ week) Candidate should have experience with: • VTL, • Manual Lathe, • Drill Press, • Bridgeport Knee Mill, • Horizontal Boring Mill (48x30" BT 50 Holder), • Experience with compressor component repairs and overhauls a plus, • Must be able to create own set up, • Must be able to work in metric Requirements • Proven experience as a Manual Machinist or similar role in a manufacturing environment., • Strong knowledge of machining techniques, tools, and materials., • Ability to read and interpret technical drawings, blueprints, and specifications., • Proficient in the use of measuring instruments such as micrometers, calipers, and gauges., • Have own tools a plus but not required, • Background check and drug screen required Benefits Pay: $30-$40/ hour DOE

Job DescriptionCompany Description The Regional Sales Manager’s (RSM) primary responsibility is to sell and implement Red Bull’s strategies and initiatives across a defined group of regions, divisions, or banners within a specific national chain. Key responsibilities include ownership of regional key account volume, market share, spending budgets, and results (including distribution, pricing, promotion, and Quality Points of Distribution (QPOD) within the chain); building and maintaining productive business relationships with assigned accounts; developing solutions that meet customer needs while achieving Red Bull’s objectives; and driving best practices by delivering strong results and creating innovative solutions. RSMs must also ensure that all regional programming and promotional activities are aligned with the overall chain strategy and the Joint Business Plan established by the head of the account. Job Description MANAGEMENT & DEVELOPMENT OF REGIONS/BANNERS/DIVISIONS OF ACCOUNT Shelf/Distribution: Executes product distribution on priority packages in accordance with Channel Strategy recommendations. Ensures that all regional, divisional, and banner schematics reflect Red Bull standards and chain headquarters directives regarding product flow and package mix. Price: Promotes and sells Red Bull’s recommended pricing program by applying best practices and using available tools. Tailors presentations to address the specific needs of each customer. Recommends key account pricing that is aligned with national RBNA standards and target price ranges. Promotion: Develops an annual promotion calendar that supports chain headquarters objectives. Presents Red Bull standards and price points in a way that effectively addresses customer needs. Ensures that all promotions are supported with effective point-of-sale (POS) materials and incremental displays. Quality Points of Distribution (QPOD): Adapts the sales approach to meet account objectives while driving effective, permanent merchandising. Evaluates return on investment (ROI) before recommending specific POS materials or customized solutions. Executes merchandising in accordance with Channel Strategy guidelines. MANAGEMENT & DEVELOPMENT OF LOCAL RELATIONSHIPS Establishes a “wiring model” that ensures effective communication with all regional chain decision-makers. Regularly participates in activities to build partnerships and establish strong connections at the regional, division, and banner levels within assigned chains. Develops the necessary tools and business review templates to ensure Red Bull personnel review consistent data with local Distributor Partners (DPs), promoting uniformity across the country. BUDGETS/ANNUAL PLANNING Ensure that the region/division/banner complies with annual Customer Marketing Agreements from chain headquarters for all assigned areas of responsibility. Manage travel and entertainment (T&E) spending within the assigned budget. BUSINESS ANALYSIS Works with the Head of Accounts to evaluate ROI for all regional, divisional, and banner-level programs and promotions. Collaborates with the Category Management Team to evaluate ROI for “pay-for-space” agreements and communicates key learnings to the Channel Lead. Leads post-promotion analysis, together with the Category team, after all programs to assess promotional effectiveness. Develops business relationships that enable Red Bull to obtain relevant retailer scan data, basket analysis data, and other insights that inform future strategy and improve understanding of consumer purchasing patterns. Thoroughly analyzes their business and customer sales to define priorities and areas of focus. BUSINESS REVIEWS & RELATIONSHIPS Conducts quarterly business reviews to update both internal and external stakeholders on the business, channel competition, opportunities, and related topics. Proactively shares examples of Red Bull marketing activities to highlight key points of differentiation from competitors. Provides Energy Insights that drive changes in promotion, pricing, distribution, or merchandising practices. Regularly engages in activities to build relationships and establish strong connections within key accounts beyond the buyer level. COMMUNICATION & TEAM WORK Uses appropriate communication processes to keep DPs and DPMs informed about regional, divisional, and banner-level programs and initiatives for their assigned chains. Routinely visits DPs to ensure personal contact and maintain open lines of communication. Maintains open communication with relevant regional and DP personnel to ensure effective program implementation. Qualifications 4+ years of sales and key account management experience with a strong record of success, preferably in the beverage, consumer packaged goods (CPG), or fast-moving consumer goods (FMCG) industries, or within a Direct Store Delivery (DSD) operation. Experience managing chain accounts across multiple channels (grocery and/or convenience preferred). Strong analytical skills, including experience working with both internal and external data sources. Excellent communication and active listening skills. Strong negotiation abilities. An innovative, solutions-oriented mindset. Self-motivated and able to work independently. Highly proficient in Microsoft Excel and PowerPoint. Additional Information This position is open to U.S. citizens, U.S. permanent residents, or individuals who are currently authorized to work in the United States on a valid visa. The base salary range for this position is $92,000 - 138,000 + cash incentives. Actual salary offers may vary based on work experience. The base pay range is subject to change and may be modified. Our current Benefits include: Comprehensive Medical, Dental and Vision Plans, 401k Match, Family Leave, PTO & Paid Holiday Schedule, Pet, Legal, and Life Insurance, Tuition Reimbursement (Benefits listed may vary depending on the nature of your employment and/or work location) Red Bull North America, Inc. is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, age, or any other classification protected by Federal, state, or local law.

Job Description If you can answer "yes" to the following questions, then you should become a Designer for the Closet Factory of Houston, Texas. Are you a "people person"? | Do you like being creative? | Can you appreciate good design and aesthetics? | Do you like being tidy & organized? Does your own closet look like an advertisement in a home lifestyle magazine? | Have others complimented you on how well-organized you are? Have they ever asked you for advice on "how you do it?" Did you like how your help made them feel? Perhaps more important, did you like how it made you feel? If you work for the Closet Factory of Houston, we will help you transform something you are naturally good at doing -- perhaps even passionate about -- into a rewarding career as a Designer. Better yet, you will be helping your clients live better lives by designing products for their homes — solutions that get them organized. Best of all, you will get paid for this privilege. No previous work experience in sales needed. This role is not remote and requires you to be in the Houston metropolitan area. You will train at our Houston office and be provided the marketing materials, samples, technical tools and professional mentorship to develop your sales skills. You will work directly with our sales manager and the co-owners of the company. You and your work will matter. There is no cold calling. You receive qualified leads of potential customers who are calling us to purchase a home organizational system. Meet with these folks in their homes, understand their needs, design a solution customized for their space and price it. Demonstrate your passion and personality, showcase your listening and design skills, and close the deal. The role is full commission and top performers earn more than $100k / year. You start with closets and as you gain more knowledge and experience you will be able to design solutions for garages, home offices & libraries, wall beds, entertainment centers, craft rooms, laundry rooms, mudrooms, pantry & wine storage. Work for clients who appreciate your work and a company who will support your professional growth. You work from home and only come into the office a couple of times each week to meet clients in the showroom, sales meetings or work on your designs / projects. Your position is full-time and you will host up to 5 appointments per week including on Saturdays and evening times. While there is some flexibility from day to day, the role is full-time. We cover the entire city of Houston and appointment locations reflect that. The opportunity is huge and if you are willing to work hard, learn and grow, you will bear the fruits of your efforts. Here is a sincere opportunity to transform your talents into a meaningful career. Closet Factory of Houston is a family owned company that has been manufacturing locally for over 30 years. To summarize, job benefits include: • F/T positions, • Paid training, • Company scheduled qualified leads, • Un-capped commission, • Monthly performance bonus, • Annual performance bonus, • Flexible hours, • Best training in the industry, • Ongoing training & support, • Full time: Earn $10,000+ per month You must be physically located within Houston, TX. Role is full commission. We look forward to learning more about you.

Job Description You are a self-driven, energetic, self-learner who is comfortable taking appointments after completing our 1 week training program. Must be available to host up to 5 appointments per week including on Saturdays and evening times. We cover the entire city of Houston and appointment locations reflect that. Top performers earn $100,000+ with the right combination of time, effort and friendliness while helping folks organize their lives. Sales rewards you financially for the efforts you apply; this role is not for part timers or dabblers. The compensation is 100% commission. With this position, you benefit from our company generated leads, our established brand & reputation and focused advertising. You will gain access to our technology including a leading CRM platform to manage your leads & sales, work alongside a strong team and receive ongoing training. Specific Requirements: • 2+ years of Sales Experience, • Home Improvement Related Sales Experience A+…but Not Necessary, • You Must Be Trainable / Coachable, • Comfortable using Computers & Technology, • F/T positions, • Paid training, • Company scheduled qualified leads, • Un-capped commission, • Monthly performance bonus, • Annual performance bonus, • Flexible hours, • Best training in the industry

Job Description Position: QC Inspector Reporting Line: QHSE Manager Department: Manufacturing Facility: Lumpkin Rd. Location: Houston, TX FLSA Status: Non-Exempt Work Status: Direct Indirect Company Overview Gilmore's manufacturing and headquarters are located in Houston, Texas USA, and it has a network of distribution partners that span the globe supporting global regional markets. Our people are fundamental to the success of our organization and remain at the heart of our achievements. At Gilmore, we aim to develop our business around a valued and motivated workforce that encourages personal development and allows our people to flourish and realize their fullest potential. Role Synopsis Inspects finished products, in-process, incoming materials, and witness/reviews of assembly and test functions and documentation, etc. for conformance to company standards. Conducts routine and non-routine analysis of raw materials, in-process, and finished product, using variety of testing devices and procedures to maintain product quality. Essential Duties & Responsibilities (includes, but is not limited to the following) To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities are not listed in order of importance. • Conduct dimensional inspections of machined parts ensuring product meets drawing specifications and standards, purchase order requirements, and customer standards as applicable., • Ability to read and interpret drawings including a thorough understanding of GD&T., • Expert at the determination of best, efficient inspection methods and choosing appropriate measurement and monitoring devices to confirm compliance with drawing requirements., • Use typical measuring instruments and tools in a QC lab (optical comparator, profilometer, hardness testers, height gages, micrometers, calipers, manual CMM etc.), • Zeiss DCC CMM experience with Calypso software is a plus., • Basic tool calibration of hand tools (micrometers, calipers etc.) and understanding of tool measurement capabilities., • Machine shop math including trigonometry., • Understanding of material traceability. Ability to read and interpret material test reports for raw material receiving inspection., • Conducts final inspection for product release prior to the product leaving the facility ensuring all defined requirements are met. Includes paperwork and test package review., • Maintain housekeeping in the Quality Control Lab., • Working knowledge of ISO 9001, API Q1, and has a good understanding of quality management system principles., • Able to work in a team with minimal supervision of required tasks., • Develop work instructions and procedures as directed by the QHSE Manager., • Other duties and responsibilities as assigned by the QHSE Manager Compliance Requirements Gilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business comply with the law at all times. The incumbent must read, understand and comply with, at all times, the Policy along with all other corresponding policies, procedures and directives. QHSE Responsibilities • Demonstrate a personal commitment to Quality, Health, Safety and the Environment, • Apply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management Systems, • Promote a culture of continuous improvement, and lead by example to ensure company goals are achieved and exceeded Qualifications/Work Experience Education • High School diploma or equivalent Experience/ Skills • Minimum of 3 years experience as an inspector conducting precision part dimensional inspection and general oilfield valve inspections and tests., • Ability to read and interpret documents such as technical drawings, procedures, operating instructions, and safety rules., • Ability to write routine reports and correspondence., • Ability to solve practical problems and deal with a variety of situations where only limited information is available, with minimal supervision., • Ability to interpret a variety of instructions in English in both written and oral format., • Strong communication and organization skills., • Working knowledge of Microsoft Office software., • Working knowledge of PSI gages and ADT pressure pumps. Preferred • CMM - Coordinate-Measuring Machine experience highly preferred. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Ability to lift and carry files, packages, and boxes weighing up to fifty (50) pounds., • Natural or corrected vision to read printed materials and computer screens., • Natural or corrected hearing and speech to communicate in person and over the telephone., • Capable of properly using standard office equipment, including a telephone, and a computer with keyboard., • Ability to wear required Personal Protective Equipment (PPE). Includes hard hats, steel-toed shoes, safety glasses, etc. Work Environment The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Work will mostly be performed indoors in a controlled environment., • Some exposure to the manufacturing and shop areas

Job Description Reports To - Vice President of Finance and Administration Direct Reports - N/A Status - Regular Full-Time Exempt Location - On site in Downtown Houston, TX, with flexibility for occasional remote work Schedule - General business hours with occasional nights and weekends O V E R V I E W The Hobby Center’s Accountant serves as a crucial member of the Finance and Accounting team, delivering consistently high-quality accounting work on important tasks that keep vital information flowing throughout the organization. The Accountant prioritizes technology, custom reporting, and automation to deliver maximum efficiency and analysis while ensuring accuracy of financial records. M A J O R F U N C T I O N S • Event-Based Accounting: manage end-to-end financial reconciliation of events including customer deposits, ticket sales, food and beverage, parking, merchandise, final event settlement, customer payment and reporting, • Grant Accounting: Manage pre- and post-award accounting including reporting, • Contribution Processing: reconcile gift processing monthly with donation team, • Parking Garage Sales: reconcile daily transactions, perform bank reconciliation, sales tax calculations, record invoices and maintain customer aging, • Daily Ticket Sales: reconcile daily transactions from ticketing department to bank deposits, recognize revenue of in-house events, record consignment sales, • General Ledger: administer month-end close and support financial reporting including producing the balance sheet and supporting income statement, maintain accounts and inter-company transactions, journal entries including accruals, prepayments, reclassifications, • Accounts Payable: oversee payments and proper coding, administer and maintain vendors and COIs, ensure 1099-readiness and compliance, prepare accruals, manage the corporate card program, • Accounts Receivable: properly apply cash receipts, maintain aging reports, balance customer accounts, • Reporting: utilize Sage Intacct reporting, prioritizing custom reports, in support of complete financial operations and annual audit, • Budget Support: produce budget to actual reporting, analyzing variances, • Audit Support: keep accurate year-round records, ensuring data integrity, • Proactively investigate and resolve discrepancies in all areas listed above, • Prioritize automation and custom reporting for efficiency in all areas listed above Responsibilities may be modified as needed to meet the organization’s goals and employee’s strengths. T R A I T S A N D C H A R A CT E R I S T I C S You Are • A tech-savvy problem-solver who will prioritize automation and technology while ensuring accurate financial recordkeeping, • A resourceful, proactive team player who thrives in a fast-paced environment and can adjust from details to big picture, • A strong communicator who can quickly translate needs into action, • A self-starter who can balance priorities and get ahead of deadlines We Are • An established, stable nonprofit organization engaged in an exciting period of growth and transformation., • Committed to creating a welcoming, inclusive workplace that embraces diversity of people and ideas and fosters a sense of belonging., • A high-performance culture that is supportive of your professional growth and ability to work in a sustainable, empowered way. Skills and Qualifications • Experience in non-profit performing arts/venue accounting is strongly preferred, • Experience with Sage Intacct and Ramp preferred, • Strong understanding of GAAP and accrual accounting, • Excellent Microsoft Office skills, including advanced Excel skills, • 4 years’ experience and a bachelor’s degree in accounting Team members at the Hobby Center for the Performing Arts must thrive on challenge and be comfortable working in a dynamic, fast-paced environment. Working with a nimble and efficient team requires that members bring an entrepreneurial spirit to their work, providing leadership across a broad scope of work. C O M P E N S A T I O N The Hobby Center offers a competitive compensation and benefits package including medical, dental, vision, life, disability insurance, a 403b savings plan with matching employer contributions, mobile phone stipend, parking, and paid time off. The anticipated hiring range for this position is $70,000-$80,000 annually. A B O U T T H E H O B B Y C E N T E R F O R T H E P E R F O R M I N G A R T S The Hobby Center for the Performing Arts deepens understanding of our shared humanity. We serve as a connector, convenor, and incubator for all Houston audiences, artmakers and arts organizations. By presenting engaging performances and educational programs, we strengthen our sense of belonging to shape a more cohesive and connected Houston community. Opened in 2002, the Hobby Center campus houses two theaters including the 2,650-seat Sarofim Hall and the 500-seat Zilkha Hall. Delivering a best-in-class patron experience, the Hobby Center welcomes over 400,000 audience members annually to engage with high-quality arts programming including the Memorial Hermann Broadway at the Hobby Center series. The Hobby Center is also home to a full season of musical theatre produced by Principal Resident Company Theatre Under the Stars, as well as a variety of diverse performances from both Houston-based and touring artists and companies. Education and accessibility initiatives are central to the Hobby Center’s impact in Houston through programs like the ExxonMobil Discovery Series that welcomes thousands of students to performances every season. Since 2012, the Hobby Center has been a national leader in accessibility, presenting Sensory Inclusive performances and providing exemplary customer service via its Access Team at all public events. Over the past year and a half, the Hobby Center developed and is implementing a strategic plan that drastically shifts its role in the Houston arts community. The Programming and Education Department was a result of this plan's first steps. This is an exciting time to be involved in the Hobby Center as it implements its new identity with a focus towards expanding the communities it serves and engages. The Hobby Center for the Performing Arts is an equal opportunity employer where equity, diversity, inclusion, and accessibility are deeply valued.

Job Description Position: QC Inspector Reporting Line: QHSE Manager Department: Manufacturing Facility: Lumpkin Rd. Location: Houston, TX FLSA Status: Non-Exempt Work Status: Direct Indirect Company Overview Gilmore's manufacturing and headquarters are located in Houston, Texas USA, and it has a network of distribution partners that span the globe supporting global regional markets. Our people are fundamental to the success of our organization and remain at the heart of our achievements. At Gilmore, we aim to develop our business around a valued and motivated workforce that encourages personal development and allows our people to flourish and realize their fullest potential. Role Synopsis Inspects finished products, in-process, incoming materials, and witness/reviews of assembly and test functions and documentation, etc. for conformance to company standards. Conducts routine and non-routine analysis of raw materials, in-process, and finished product, using variety of testing devices and procedures to maintain product quality. Essential Duties & Responsibilities (includes, but is not limited to the following) To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. These duties and responsibilities are not listed in order of importance. • Conduct dimensional inspections of machined parts ensuring product meets drawing specifications and standards, purchase order requirements, and customer standards as applicable., • Ability to read and interpret drawings including a thorough understanding of GD&T., • Expert at the determination of best, efficient inspection methods and choosing appropriate measurement and monitoring devices to confirm compliance with drawing requirements., • Use typical measuring instruments and tools in a QC lab (optical comparator, profilometer, hardness testers, height gages, micrometers, calipers, manual CMM etc.), • Zeiss DCC CMM experience with Calypso software is a plus., • Basic tool calibration of hand tools (micrometers, calipers etc.) and understanding of tool measurement capabilities., • Machine shop math including trigonometry., • Understanding of material traceability. Ability to read and interpret material test reports for raw material receiving inspection., • Conducts final inspection for product release prior to the product leaving the facility ensuring all defined requirements are met. Includes paperwork and test package review., • Maintain housekeeping in the Quality Control Lab., • Working knowledge of ISO 9001, API Q1, and has a good understanding of quality management system principles., • Able to work in a team with minimal supervision of required tasks., • Develop work instructions and procedures as directed by the QHSE Manager., • Other duties and responsibilities as assigned by the QHSE Manager Compliance Requirements Gilmore has a Business Ethics Policy (the "Policy") which provides guidance to employees in day-to-day roles, as well as helping the employee and the business comply with the law at all times. The incumbent must read, understand and comply with, at all times, the Policy along with all other corresponding policies, procedures and directives. QHSE Responsibilities • Demonstrate a personal commitment to Quality, Health, Safety and the Environment, • Apply Gilmore, and where appropriate Client Company's, Quality, Health, Safety & Environment Policies and Safety Management Systems, • Promote a culture of continuous improvement, and lead by example to ensure company goals are achieved and exceeded Qualifications/Work Experience Education • High School diploma or equivalent Experience/ Skills • Minimum of 3 years experience as an inspector conducting precision part dimensional inspection and general oilfield valve inspections and tests., • Ability to read and interpret documents such as technical drawings, procedures, operating instructions, and safety rules., • Ability to write routine reports and correspondence., • Ability to solve practical problems and deal with a variety of situations where only limited information is available, with minimal supervision., • Ability to interpret a variety of instructions in English in both written and oral format., • Strong communication and organization skills., • Working knowledge of Microsoft Office software., • Working knowledge of PSI gages and ADT pressure pumps. Preferred • CMM - Coordinate-Measuring Machine experience highly preferred. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Ability to lift and carry files, packages, and boxes weighing up to fifty (50) pounds., • Natural or corrected vision to read printed materials and computer screens., • Natural or corrected hearing and speech to communicate in person and over the telephone., • Capable of properly using standard office equipment, including a telephone, and a computer with keyboard., • Ability to wear required Personal Protective Equipment (PPE). Includes hard hats, steel-toed shoes, safety glasses, etc. Work Environment The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation(s) may be made to enable individuals with disabilities to perform the essential functions. • Work will mostly be performed indoors in a controlled environment., • Some exposure to the manufacturing and shop areas All offers of employment at Gilmore, a Control Devices, LLC company, are contingent upon the successful completion of a background check and drug screen.

Job Description T Tele-Radiologist – Work from Anywhere in the U.S. | NJ License Cost Covered Diagnostic, Neuroradiology, MSK, Mammography, Pediatric, Cardiac, and Nuclear Radiology Beacon Radiology Location: Fully Remote, U.S.-Based Position Type: Full-Time or Per Diem License Requirement: Active, unrestricted New Jersey medical license required Bonus: NJ license cost covered with a 2-year commitment Read From Anywhere. Make an Impact in New Jersey. Beacon Radiology is seeking Board-Certified or Board-Eligible Radiologists to join our growing fully remote tele-radiology team supporting hospital partners across New Jersey. This is an outstanding opportunity for radiologists who want the freedom to live anywhere in the United States while building a strong, well-compensated remote practice with a respected organization. Whether you are seeking a full-time role with strong earning potential or per diem flexibility, Beacon Radiology offers a streamlined remote model, transparent compensation, and meaningful clinical work across multiple subspecialties. We are especially interested in radiologists with expertise in Diagnostic Radiology, Neuroradiology, MSK, Mammography, Pediatric Radiology, Cardiac Imaging, and Nuclear Radiology. Why Radiologists Choose Beacon * 100% remote opportunity * Live anywhere in the U.S. * Full-time and per diem options available * Transparent compensation model * Strong hospital-based case mix * Supportive clinical and operational leadership * NJ license cost covered with a 2-year commitment * Opportunity to join an expanding tele-radiology platform CompensationFull-Time Compensation Weekday Coverage * $55.00 per wRVU For personally performed diagnostic radiology services on weekdays * wRVU Bonus Greater than 10,000 Weekend Coverage * $4,900 per 8-hour shift * $6,700 per 11-hour shift Hourly Weekend Rate for Partial Coverage Only * $610 per hour Applies only when the full 8-hour or 11-hour weekend shift is not worked Full-time compensation is subject to applicable modifiers and Beacon Radiology policies. Per Diem Compensation * $350 per hour Per diem coverage applies to scheduled shifts that are not classified as full-time assignments. Opportunity Overview As a Tele-Radiologist with Beacon Radiology, you will provide high-quality remote interpretations for New Jersey hospital partners while enjoying the flexibility of a fully remote practice. You will work within an established tele-radiology structure focused on quality, responsiveness, and physician support. This role is ideal for radiologists who value autonomy, efficiency, strong compensation, and the ability to practice from anywhere in the country without sacrificing connection to a collaborative clinical team. Key Responsibilities * Perform remote diagnostic radiology interpretations in accordance with current standards of care * Deliver accurate, timely reads while meeting turnaround expectations * Collaborate professionally with referring clinicians, hospital partners, and internal leadership * Comply with medical staff bylaws, hospital requirements, and Beacon Radiology standards * Maintain all licensure, board status, certifications, and CME requirements * Support quality-driven patient care through reliable, consistent remote coverage Qualifications * Board-Certified or Board-Eligible in Diagnostic Radiology * Active, unrestricted New Jersey medical license * Ability to provide high-quality remote interpretations independently * Strong communication skills and comfort working in a tele-radiology environment * Prior tele-radiology experience preferred Additional Advantage We understand that licensure can be a barrier to entry. For radiologists who are committed to growing with us, Beacon Radiology will cover the cost of your New Jersey license with a 2-year commitment. Join Beacon Radiology If you are looking for a fully remote radiology opportunity with flexibility, strong compensation, and hospital-based clinical work, Beacon Radiology offers a platform where you can thrive. Practice remotely. Earn competitively. Live where you want. Contact(s): Regional Vice President: Jahod Henry - Recruiter(s) Margaret Delia - Barbara Hruska - - For General Inquiry

Job Description Sr. Financial Systems Analyst Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. DCI is looking for a versatile Sr. Financial Systems Analyst to focus on our financial systems and provide support to our FP&A and Accounting teams. In this role, you will both support and lead projects driving value with OneStream, Great Plains and more. You will have the opportunity to learn tools associated with T&E, Procurement and Cash Applications. If you are a proven systems analyst with experience in Finance and have a passion for driving innovation and process improvement, we encourage you to apply. Location: Tampa, FL or Channelview, TX. Only candidates in these areas will be considered. This is a hybrid position with an expectation of at least three days per week in our Channelview or Tampa office. Some travel (<10%) may be required. Pay Range: $100,000 - $110,000 annual salary Responsibilities • Financial System Architecture: Lead the end-to-end lifecycle (requirements, configuration, testing, and deployment) for OneStream and GP, with a specific focus on the upcoming 2026 Planning Implementation in OneStream., • Process Optimization: Partner with FP&A and Accounting to identify bottlenecks and automate manual workflows., • Project Leadership: Act as the technical lead for financial system initiatives, ensuring alignment with the DCI PMO and the long-term Financial Systems Roadmap., • Tier 2+ Specialized Support: Serve as the senior escalation point for complex financial system issues, resolving technical hurdles that impact monthly and year-end close., • Vendor & Stakeholder Management: Collaborate with external vendors to ensure project delivery meets DCI’s quality standards and drives measurable productivity gains., • Data Integrity & Consolidation: Support complex global consolidations within GP and OneStream, ensuring "one version of the truth" for financial reporting., • Secondary support for our Cash Application, Procurement and T&E solutions. Note, Cash Applications will be a new implementation in 2026., • Assist in the execution of the Financial Systems Roadmap., • Engagement with the DCI PMO: Ensure procedures are followed and updates are provided on time., • Contribute to a collaborative team environment., • Must be able to work in the US for any employer, we are unable to sponsor at this time., • Education: Bachelor’s degree in Management Information Systems (MIS), Computer Science, Finance, or Accounting. A dual background in IT and Finance is highly preferred.., • Technical Proficiency: 5+ years of experience in systems analysis or financial systems administration., • OneStream Expertise: Minimum of 3 years of hands-on experience configuring and supporting OneStream XF, including experience with Workflow, Cube Views, and Business Rules., • Exposure to Financial ERPs, especially GP., • Ability to lead in a supportive team environment., • Microsoft Dynamics GP: Deep experience with Great Plains administration, including SmartLists, Smart Connect, or Year-End closing processes., • Implementation Experience: Prior experience leading a large-scale implementation (specifically Planning or Cash Application modules)., • Scripting/Reporting: Experience with SQL, VB.net (for OneStream), or Visualization Tools to enhance financial reporting capabilities., • Medical, Dental and Vision Insurance, • 401(k) with generous employer match, • Paid time off, • 10 Paid holidays, • Optional Health savings account & Flexible spending account, • Life insurance, • Parental leave, • Tuition reimbursement

Job Description POSITION TITLE: Quality Control Manager Location: Houston, TX Department: Quality Control Reports to: Associate Director, Quality Control About CTMC CTMC is a pioneering biotech joint venture, formed by National Resilience and MD Anderson Cancer Center, and located in the renowned Texas Medical Center. Our mission is to accelerate cell therapies from bench to bedside. We offer a wide range of cell therapy modalities, including CAR-T, TIL, ETC, and TCR-T. Our expert team collaborates closely with MD Anderson’s research and clinical faculty, bringing impactful cell therapies to cancer patients. In our first year alone, we have filed four INDs, each ahead of schedule, demonstrating our commitment to delivering innovative treatments to patients with speed and precision. Our alliance with National Resilience, an ambitious biomanufacturing organization that has raised $2 billion in two years, enables us to remain at the forefront of biomanufacturing practices, leveraging advanced technology and processes to deliver exceptional results. Our state-of-the-art, 60,000 sq. ft. facility in the Texas Medical Center is staffed by an integrated team of over 80 industry veterans and scientists who are passionate about bringing life-saving cures to patients. Our unique joint venture structure, with two highly established partners, provides us with the financial stability and long-term horizon to achieve our mission. At CTMC, we value our employees and offer a variety of development opportunities within our organization. We foster a team-first culture and a balanced work-life environment to ensure our staff is energized and engaged in our mission. If you share our passion for advancing the frontiers of medical science with innovative therapeutics and want to join a highly dedicated team committed to delivering novel cures to patients, we invite you to submit your application. We look forward to hearing from you and exploring how your skills and expertise can help us achieve our mission. Key Responsibilities: The QC Manager will provide technical and operational oversight for analytical testing activities supporting clinical and pivotal-stage Cell and Gene Therapy (CGT) programs transitioning toward commercial readiness. This role will lead testing execution, ensure compliance with GMP requirements, and support method qualification and validation activities for advanced analytical platforms including flow cytometry, molecular assays, and ELISA. The ideal candidate is a strong technical leader with demonstrated expertise in flow cytometry data analysis, molecular testing methodologies, and ELISA platforms within CGT manufacturing environments. • Provide day-to-day supervision of QC analytical staff performance:, • Flow cytometry analysis (multicolor panels, CAR detection, phenotyping, functional assays)., • Molecular assays (e.g., qPCR/ddPCR, vector copy number, gene expression), • ELISA-based potency and cytokine assays, • Ensure testing activities support clinical Phase I/II, pivotal, and commercial readiness programs., • Oversee data review, trending, and technical evaluation to ensure data integrity and compliance with 21 CFR Part 211 and Part 11 requirements., • Lead or support analytical method qualification and validation activities per ICH guidelines, • Support transfer of analytical methods from Development to QC., • Participate in investigations, deviations, OOS/OOT events, and CAPAs related to analytical testing., • Ensure proper documentation practices and adherence to internal SOPs and regulatory standards., • Support regulatory inspections and client audits as SME for analytical platforms., • Contribute to readiness for commercial-scale manufacturing and lifecycle management., • Perform daily lab tasks and support adherence to production and testing schedules., • Assist the execution of method, equipment, and process validation/qualification activities in accordance with ICH guidelines, cGMP, cGTP, and other applicable regulatory standards., • Support reference standard characterization and data trending., • Ensure lab readiness for internal and external audits by maintaining compliance with regulatory and quality standards., • Assist with inventory management to support uninterrupted laboratory operations., • Maintain general laboratory organization, cleanliness, and compliance with 5S principles., • Bachelor’s degree in science field requiredor equivalent combination of education and experience., • 7+ years of experience in GMP QC laboratory within Cell and Gene Therapy orbiologics manufacturing., • Advanced experience in:, • Flow cytometry analysis (panel design, gating strategy, data interpretation), • Molecular analytical methods (qPCR/ddPCR preferred), • ELISA assay execution and data interpretation, • Demonstrated experience supporting pivotal-stage or commercial readiness programs., • Direct experience in analytical method qualification and/or validation under GMP., • Strong understanding of data integrity, electronic systems, and regulatory expectations., • Experience supervising or mentoring technical staff preferred., • Experience supporting regulatory inspections (FDA, EMA)., • Experience with CAR-T or gene-modified cell therapy products., • Familiarity with analytical lifecycle management and assay robustness improvement., • Strong technical troubleshooting skills, • Ability to interpret complex analytical datasets, • Leadership and team development, • Regulatory and compliance mindset The incumbent in this position works in an office environment. The incumbent in this position will use the following equipment and shall have the following physical demands: Equipment- • Computer, • Printer, • Scanner, • Telephone, • Lab Equipment Physical Demands- • Frequent sitting, standing, walking The above job description is an overview of the functions and requirements for this position. This document is not intended to be an exhaustive list encompassing every duty and requirement of this position; your supervisor may assign other duties as considered necessary.

Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States. We have an exciting opportunity for a Machinist III to join our team! ** We are actively searching for qualified candidates for this potential opening; however, we do not have assurance at this time when the position will be finalized and opened. Because we have strong reason to believe the position will be approved soon, we are proceeding with identifying qualified candidates and conducting interviews. **This is a CBA position with Amentum. The Machinist II will: • Plan, layout, machine and assemble to precision tolerances parts and tools designed to meet exacting standards and specifications consisting of mechanical or specialty apparatus., • Set and operate a variety of machining equipment such as engine and bench lathes, vertical and horizontal milling machines, job borers, grinders, hones, gear cutters, and drill presses, to fully utilize all functions of the machines., • Plan and determine the sequence of machining operations, number of cuts required to obtain required finishes and tolerances, determine cutting tools to be used and method of holding and aligning work., • Make complete layout on parts involving compound angles and exacting mating part work, to check for sufficient stock and for reference during machining., • Set up machines to completely and independently perform any operations within their capacity. Select mount and align various specialized machine attachments and standard or improvised tooling. Determine, set, and adjust machine speeds, feeds and depth of cut. Select, mount, and fasten cutting tools for specified finish and best performance consistent with the type of material being machined., • Check own machine set up and parts run for conformance to blueprint specifications. Grind own tool bits and drills., • Work from detailed drawings, templates, sketches, assembly blueprints, or oral instructions, • Offers technical direction to customers on pre-fabrication reviews, modifications, or repairs., • Operate the machines to perform such typical operations as chasing all types of single and multiple external tapers; turning, boring, reaming, facing, slotting, etc., for any type of machine fit; machining parts involving compound angles or concentric and coordinated concave or convex surfaces to exacting tolerances., • Ability to program and operate in at least one CNC language., • Train less experienced machinists; general inspection of work., • Maintain a clean and organized work area., • Organize and properly store inventory, materials, and safety equipment., • Use of lift equipment as required., • Perform related duties as required. Requisition Qualifications: This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. Required Skills: • Requires a High School Diploma or equivalent and a minimum of 12 years of machinist experience., • Familiarity in at least one CNC programming language., • Proficient with standard concepts, practices, and procedures., • Technical aptitude to operate Mazak Lathes with Mazatrol programming experience. Sets up, and operates Mazak CNC lathes to produce precision metal parts according to technical drawings and specifications. Key responsibilities include editing programs (often using G-code or Mazatrol), performing first-piece and in-process inspections with precision measuring tools like micrometers and calipers, and performing routine machine maintenance. This role requires a strong understanding of machine tools, materials, and GD&T (Geometric Dimensioning and Tolerancing)., • Develop CNC/Lathe programs to control machining or processing of metal or plastic parts by automatic machine tools, equipment, or systems, experience in .stp files, CREO, and/or MasterCam, Mazatrol interpreting project blueprints, designing programs and setting up machines to produce the component outlined in the program, • Proficiency in the programming of CNC Mills and Lathes with CAD CAM is a plus; ProE, GibbsCAM, or Conversational CNC with multi axis programming., • Experience on the following machine tool types: Mazak Lathes, HAAS Machining Centers, Hurco Machining Centers, Servo, Mazak Machining Centers., • 5-Axis - MasterCam Programming experience, 5-Axis CNC, Haas, Okuma, Mazak, DMG Mori DMU, EDM, Water Jet, Amada Press Brake experience., • Experience with Horizontal multi axis or Vertical with 4th axis rotation with setup and tooling knowledge., • Overhead crane experience., • Handling of NASA flight hardware. Why Join Our Team? Click on the below links to view just a small sample of all that we do! Come join our team and be part of our future. We look forward to seeing you! In addition to exciting career opportunities, we also have: • Excellent personal and professional career growth, • 9/80 work schedule (if applicable), • Onsite cafeteria (breakfast & lunch), • Much, much more! For more information on our partnership with NASA at Johnson Space Center (JSC), please visit • Must be able to complete a U.S. government background investigation. ESSENTIAL FUNCTIONS: Physical Requirements: Requires Occasional: • Climbing and maintaining balance on ladders, scaffolds, structures, etc. above and below ground level., • Lifting up to 50 pounds from ground level, waist level, and overhead (occasional)., • Carrying up to 50 pounds for 3 feet (occasional)., • Bending, kneeling, crouching/squatting and crawling from 1 to 30 minutes at a time. Requires Frequent: • Reaching for, handling, and manipulating objects and materials in all directions., • Standing., • Hearing with or without correction. Requires Constant: • Coordinating eyes, hands, and fingers to operate tools and equipment., • Seeing with or without correction. Requires the ability to: • Follow set procedures and standards., • Apply basic mathematical skills., • Plan and work selecting proper tools., • Compare and understand differences in the size, shape, and form or lines, figures, and objects., • Follow written and oral directions, plans and blueprints., • Picture and evaluate solid objects from drawings or diagrams using standards that can be measured or checked., • Recognize and report safety hazards., • Must be able to work in a fast-paced team environment. Performs routine and/or non-routine skilled work, relies on experience and judgment to plan and execute tasks. Must be able to wear steel toed shoes. Will be required to participate in hearing loss prevention program.\n Work Environment: The Manufacturing Facility is a large, climate-controlled work area with an array of machining equipment. Exposure to uneven ground levels, various noise levels caused by power tools, machinery, equipment, etc. Equipment and Machines: Operate and maintain machining centers both manual and CNC (mills, lathes, drill presses, grinders, hones, borers, water jets, etc.), powered shop tools (grinders, wire wheels, etc.), shop equipment (presses, drills, sheet metal brakes, sanders, saws, shears, etc.), lifts, mobile hoists (cherry pickers), chain hoists, overhead cranes, pallet jacks (powered and unpowered), hand trolleys, 4-wheel dollies, hand tools, stands, clamps, vises, potential forklift. Computer workstations, peripheral equipment to maintain/adjust database logs and records and print documents. Other office machines (printer, fax, etc.). Attendance: Regular attendance in accordance with established work schedule is critical. Ability to work outside normal schedule and adjust schedule to meet peak periods and surge requirements. Other Essential Functions: Must be able to work in a team atmosphere. Must put forward a professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety risk/hazard to the employee or others. #JETS #JETSII Compensation Details: TN3 Original Posting: 02/09/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.