Test engineer jobs in Chandler, Arizona - Page 2Create job alerts

Job Description Overview We are seeking a talented and motivated Systems Engineer to join our dynamic team in Mesa, AZ. In this role, you will be responsible for leading DO-254 documentation planning, development, and compliance execution for hardware in multidiscipline defense training solutions. Partners with other teams to ensure rigorous requirements, design assurance, verification, traceability, configuration management, and certification readiness aligned to DO-254 and related aerospace/defense standards. If you have a passion for technology and a knack for problem-solving, we want to hear from you! Responsibilities • DO-254 Leadership: Lead the planning and development of technical design., • Manage Design Assurance Levels (DAL) across hardware lifecycles., • Perform analyses such as FEW, ELA, FMECA, Fault Tree Analysis or other types of evaluations of design., • Author white papers, test plans, technical documentation and test reports., • Decompose project specific systems engineering requirements to understand detail the design for each engineering team within the scope of the contact, testable, traceable, validated, and maintained to meet customer requirements specifications or ensure integration of SoS., • Utilize understanding of MIL and DO STDs or other related standard/regulations to ensure compliance., • Perform and/or assist with on-site or in-housing testing events, • Bachelor's degree in Engineering or a related field strongly preferred., • Minimum of 3 years of experience in systems engineering or a similar lead engineering role., • Proven understanding of MIL and DO STDs., • Ability to work in a team and gather information required for technical documentation., • Understands data input/output requirements and equipment requirements., • Desired skillset in 3d Modeling, mechanical design and/or electro-mechanical interfaces structural analyses., • Broad knowledge of engineering systems including digital and analog electronics, and mechanics., • Ability to read schematics and troubleshoot circuits if needed., • Excellent problem-solving skills and attention to detail., • Strong communication skills and ability to work collaboratively in a team environment., • Able to speak comfortably with management, program managers and directors, and clients., • Military service or government contract experience preferred., • Willing and able to travel both in and outside US., • Ability to obtain Secret Security Clearance required.

Job Description Nammo Defense Systems, Inc., a defense contractor, is the primary USA operation of the Nammo Group (Nammo AS). Nammo Defense Systems Inc. (NDS) develops, manufactures, and supports Shoulder Launched Munitions (SLMs), energetic material solutions such as aircraft emergency escape systems, actuation devices, rocket motors, warheads, and composite solutions including carbon fiber tubes and composite aerospace structures. JOB OVERVIEW: Manufacturing Engineers at NDS Mesa analyze, design, develop, and implement methods to produce Nammo products that support the warfighter. The Manufacturing Engineer is responsible for the process, tooling, work instructions, and training required to deliver product safely, efficiently, and on time. How you will be rewarded as our Manufacturing Engineer: • Competitive compensation, • Monday-Thursday work week working four 10-hour days (off on Fridays), • Generous paid time off and Holiday Pay, • Medical, Dental and Vision Insurance, • 401(K), employee assistance programs, health savings account KEY RESPONSIBILITIES: • Apply engineering principles to ensure safety in manufacturing processes that contain propellants, pyrotechnics, and/or explosives, • Tooling design and documentation, • Provide hands-on assembly training to operations team, • Evaluate existing equipment and / or systems for methods to improve safety, performance, efficiency, and reliability, • Identify and mitigate risks associated with critical assembly operations, • Apply working knowledge of product design and assembly to the manufacturing process, • Define maintenance for equipment and tooling through coordination with maintenance team, • Identify and champion IR&D and continuous improvement projects, • Coordinate and perform all necessary validation and / or process engineering evaluations as needed for manufacturing equipment, • Review and provide feedback on product designs to ensure manufacturability, • Author and maintain product assembly work instructions, • Troubleshoot and resolve tooling and equipment electrical and mechanical issues, • Author and present oral presentations outlining/summarizing progress on selected projects and programs to both internal and external customers., • Participate in and support internal and external audits COOPERATION This role requires collaboration across internal teams and with external stakeholders. LEVEL OF DECISION MAKING This position requires daily autonomous decision-making capabilities when working with both internal and external customers. SKILLS & QUALIFICATIONS: • BS/MS in engineering discipline or physics with ability to perform basic engineering analyses (stress, deflection, flow rate, pressure drop, and tolerance stack-ups), • 3+ years of experience designing electro-mechanical manufacturing equipment using 3D CAD software, • 3+ years of experience working with pneumatics, controls, sensors, and PLC’s, • Preferred 3+ years of experience with CNC machining setup and programming, • Solid understanding of metal working tolerances produced by milling, grinding, turning, and laser/water jet cutting, • Experience with Lean Manufacturing and applying statistics in a manufacturing setting, • Experience designing, installing, and qualifying production equipment including hand tools, fixtures, gages, and semi-automated equipment, • Capable of providing hands-on support and troubleshooting of assembly equipment in a production environment, • Proficiency at authoring technical documents such as test plans, test reports, manufacturing procedures, and project reports, • Knowledge and experience with selection of materials commonly used in tools, gages, and assembly fixtures, • Basic understanding and experience in Design for Manufacturing (DFM), Design of Experiments (DOE), Failure Mode Effects Analysis (FMEA), and process hazard analysis (PHA), • Ability to obtain BATF approval to engage in certain explosive operations COMPETENCIES: • Excellent communication and collaboration skills, • Strong problem-solving and critical-thinking abilities, • Action oriented with ability to work in fast-paced environments, • Leadership or teamwork abilities, • Technical writing WORKING CONDITIONS: • Full-time on-site position., • This position may require travel on an as-needed basis., • Work with explosives, pyrotechnics, and solid rocket propellant devices., • This role may involve working in diverse settings and conditions. Note: Due to US Export Control laws and regulations; applicants selected for employment must show proof of a U.S. Person status before employment may begin.

Job Description The Process Engineer Technician in the Process Engineering Group supports a team of engineers in the execution and improvement of propellant, pyrotechnic, and explosive manufacturing at the Mesa, Arizona facility. This position will provide technical and mechanical support for new, continuing, and engineering production efforts. In addition, the technician monitors processes/KPIs, trains manufacturing operators, authors/updates/redlines process documentation, and ensures work instruction implementation as directed by engineering. How you will be rewarded as our Process Engineering Technician: Competitive compensation Monday-Thursday work week working four 10-hour days (off on Fridays) Generous paid time off and Holiday Pay Medical, Dental and Vision Insurance 401(K), employee assistance programs, health savings account KEY RESPONSIBILITIES: • Apply basic engineering level principles to safely process propellants, pyrotechnics, and/or explosives for product development or improvement to meet program requirements., • Assist in the development of new tooling, processes, and techniques., • Prepare technical reports detailing work progression and results., • Ability to troubleshoot and assess risks., • Provide training to operators., • Review results of experiments and analyses performed by either engineering or operators., • Collaborate with operators, quality, and engineering teams to sustain and improve current processes., • Follow standard practices and safety procedures., • Collect data and ensure its accuracy., • Coordinate and schedule support work for other departments., • Wear safety equipment such as protective eyewear, coveralls, conductive footwear, respirators, or self-contained breathing apparatus., • Occasionally exert up to 50 lbs. of force in the course of normal work., • Additional duties as required., • Follow standard practices and safety procedures., • Strictly adhere to all safety policies and procedures to ensure a safe working environment. COOPERATION: This role requires collaboration across internal teams and with external stakeholders. LEVEL OF DECISION MAKING: This position requires daily autonomous decision-making capabilities when working with both internal and external customers. SKILLS & QUALIFICATIONS: • Associate degree in a technical field or High School/General Education Diploma (GED) with hands-on work experience, • Minimum 0 years of experience with propellants, pyrotechnics, and/or explosives, • Proficient operator of larger and handheld equipment (pumps, forklift, mixers, hydraulics, feeder/extruders, compressors, particle size analyzer, ovens, drill press, etc.), • Hands on experience with program/project work in applied R&D and/or production support, • Ability to obtain approval through ATF to handle Nammo Defense Systems’ products and information., • Basic understanding of mechanical and electrical systems and interpreting their drawings, • Proficient in using basic hand tools and familiarity with precision measurement tools, • Safe operation of powered tools and equipment, • Ability to perform basic assembly and disassembly of components, • Conduct simple functional tests and inspections, • Recognize and escalate abnormal conditions, defects, or test results, • Follow written work instructions and procedures accurately, • Accurately record test data and observations, • Communicate findings clearly to engineering or supervisory staff, • Basic computer literacy (email, Excel, Word, simple data entry), • Adherence to all safety policies and procedures, • Good housekeeping in work areas, • Ability to learn and take direction, • Dependable and punctual work ethic, • Ability to work effectively with the cross-functional NDS Mesa Team **Must be able to obtain BATF approval DESIRED SKILLS: • General understanding of chemical science (overlapping polymers, analytical measurements, and physical properties), • A working knowledge of energetic material regulations and safe handling/measurement, • Minimum 2 years of experience in manufacturing/laboratory environment (chemical industry preferred) COMPETENCIES: • Excellent communication and collaboration skills., • Strong problem-solving and critical-thinking abilities., • Ability to work in fast-paced environments., • Leadership or teamwork abilities. WORKING CONDITIONS: • Full-time on-site position, • This position may require working in diverse settings and conditions. Note: Due to US Export Control laws and regulations; applicants selected for employment must show proof of a U.S. Person status before employment may begin.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do In this role you will be responsible for performing test engineering activities for RF/Microwave products and sub-assemblies developed for commercial, military and space markets. You will plan and execute test tasks that include interpreting test requirements, writing test plans, designing test hardware, designing test software and testing and debugging deliverable hardware for commercial, military, and space markets. This includes activity for both RF and digital testing of modules. The day-to-day In this role you will be responsible for performing test engineering activities for RF/Microwave products and sub-assemblies developed for commercial, military and space markets. You will plan and execute test tasks that include interpreting test requirements, writing test plans, designing test hardware, designing test software and testing and debugging deliverable hardware for commercial, military, and space markets. This includes activity for both RF and digital testing of modules. What you'll need * 3+ years of module and/or systems integration and test * Bachelor's degree in Electrical Engineering or equivalent experience * US citizenship required * Up to 10% travel What will help you on the job * Proficiency with programming in one or more languages such as C#, Python, or C++ * Working knowledge of RF amplifiers, mixers, oscillators, and transceivers * Working knowledge of programming and controlling test equipment through SCPI commands * Working knowledge of object oriented programming * An understanding of test equipment such as vector network analyzers, spectrum analyzers, signal analyzers, digital signal generators, power meters, and noise figure meters * Security clearance: secret or higher Salary range $95,000.00 - $149,500.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $117,500.00- $176,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do As an experienced software engineer in test automation, you will need to think long-term and drive towards scalable and maintainable solutions leveraging industry standard automation tools and frameworks. You will work together with Engineers from many domains to improve test frameworks, support new test strategies, and drive standardization of test data. In a highly collaborative team environment, you will take a stake in the team's mission to align with software engineering best practices and master our craft. This includes developing software, reviewing code, integration testing, and leveraging CI/CD pipelines, etc. Ultimately, you will be responsible for ensuring quality software solutions are delivered to both internal and external customers. The day-to-day • Digesting top-level requirements and providing feedback to ensure they are concise, testable, and realistic, • Deriving software requirements from stakeholder needs, • Designing and documenting test software frameworks, services, utilities, libraries, file formats, and standard conventions to allow for long-term test station operation, maintenance and support, • Reviewing and testing both individual contributions and those of colleagues and collaborators, • Participating in continuous improvement activities to help find opportunities for reuse as well as process modifications that drive development efficiencies, • Imparting knowledge and expertise of test equipment and instrumentation in software designs, • Participating in technical discussions and support inquiries, • Bachelor of Science in Electrical Engineering/Bachelor of Science in Computer Science, similar technical degree, or equivalent experience, • 5+ years systems and test experience in complex environments, • Experience developing software in a team environment using version control, build automation, bug tracking, test driven development and similar processes/technologies, • Highly experienced with National Instrument's TestStand and C#, • Experience with Python, • Experience implementing test automation, instrument drivers, and other test tools, • Experience creating software test plans to demonstrate requirements coverage and compliance, • Experience creating fully documented reusable libraries, abstractions, and APIs, • Results oriented with a high degree of accountability, commitment, and responsibility, • Knowledge of current test software development industry tools and standard methodologies., • Knowledge of Object-Oriented programming and design patterns, • Good understanding of security, user privileges, and system administration, • Experience with National Instrument LabVIEW, • Experience with networking (TCP, UDP, Multicast, etc.) and network devices., • Experience communicating with RF instrumentation, • Excellent communication skills, • Intellectual curiosity and test mentality $140,500.00 - $221,500.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $174,000.00- $261,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

Job DescriptionCompany Description Renesas is a dynamic, multi-cultural technology company where employees learn, mentor, innovate and thrive. Renesas is extending our share in fast-growing data economy-related markets such as infrastructure and data center and strengthening our presence in the industrial/IOT and automotive segments. Our aim is to achieve customer satisfaction and enhance society by providing highly reliable and high-quality products and services. Join us and build your future by being part of what’s next in electronics. Job Description We are seeking a Principal Analog Design Engineer to serve as a global technical authority and lead the architectural evolution of our PMIC and mixed-signal product lines. This high-impact role spans the entire development lifecycle—from early-stage customer collaboration and specification to final silicon verification and production readiness. We are looking for a seasoned expert with over 12 years of experience who can balance technical mastery with strategic mentorship, driving both engineering excellence and company-wide methodology improvements. If you are ready to influence product roadmaps and lead multicultural teams in a collaborative, innovation-first environment, we invite you to help us design the sustainable solutions of tomorrow. Responsibilities: • Lead the full development lifecycle of major analog and mixed-signal blocks and top-level PMIC products, from initial specification through design, simulation, and silicon verification., • Act as a global technical authority and primary point of contact, providing sound architectural recommendations and mentoring engineers to ensure excellence across the design team., • Collaborate directly with customers to define system requirements and develop innovative solutions that meet performance, area, and power constraints., • Oversee high-level verification planning, DFT strategy, and lab evaluation in partnership with applications and test engineering teams to ensure designs are production-ready., • Drive the identification and implementation of company-wide improvements in engineering methodologies, policies, and strategic initiatives., • Support roadmap planning and ensure technical advice is aligned with external market trends and evolving CMOS process technologies.Qualifications, • Minimum of 12 to 15 years experience in power management with a proven record of acting as a technical project lead on complex ICs within the last four years., • Degree level qualification in Electronics Engineering or a related discipline., • In depth knowledge of CMOS power management circuits, organizational business objectives, and current market trends., • Demonstrated ability to drive engineering initiatives and process improvements while delivering high-quality results under tight schedule pressure., • Exceptional communication and presentation skills, with the ability to convey complex technical concepts to multicultural teams and external customers., • Proven capability to work independently as a technical lead while fostering a collaborative environment as a role model and mentor., • High cross cultural sensitivity and the flexibility to undertake occasional international travel at short notice. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose ‘To Make Our Lives Easier.’ As the industry’s leading expert in embedded processing with unmatched quality and system-level know-how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, including High Performance Computing, Embedded Processing, Analog & Connectivity, and Power. With a diverse team of over 22,000 professionals in more than 30 countries, we continue to expand our boundaries to offer enhanced user experiences through digitalization and usher into a new era of innovation. We design and develop sustainable, power-efficient solutions today that help people and communities thrive tomorrow, ‘To Make Our Lives Easier.’ At Renesas, you can: • Launch and advance your career in technical and business roles across four Product Groups and various corporate functions. You will have the opportunities to explore our hardware and software capabilities and try new things., • Make a real impact by developing innovative products and solutions to meet our global customers' evolving needs and help make people’s lives easier, safe and secure. Join Renesas. Shape Your Future with Us. Renesas Electronics is an equal opportunity and affirmative action employer, committed to celebrating diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by federal, state or local law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas. We have adopted a hybrid model that gives employees the ability to work remotely two days a week while ensuring that we come together as a team in the office the rest of the time. The designated in-office days are Tuesday through Thursday for innovation, collaboration and continuous learning.

Job Description Job Title: Product Engineer – Senior Member of Technical Staff (SMTS) Product engineer is responsible for NPI development from first Si through qualification and high-volume production ramp. Employer: Everspin Technologies, Inc. Department: Backend OPS Reports To: VP Backend OPS Terms: Full Time/Exempt/Salary/In Office About Everspin Headquartered in Chandler, Arizona, Everspin Technologies (Nasdaq: MRAM) is the worldwide leader in designing, manufacturing, and commercially shipping discrete and embedded Magnetoresistive RAM (MRAM) into markets and applications where data persistence and integrity, low latency, and security are paramount. With over 200 Million MRAM products deployed in data center, cloud storage, energy, industrial, automotive, and transportation markets, Everspin has built the strongest and fastest growing foundation of MRAM users in the world. For more information, visit . The Role Reporting to VP Backend OPS, and based in our Chandler, Arizona headquarters, the SMTS Product engineer is responsible for bringing all new MRAM products(NPI) to market involving pre-Si design spec definitions; first Si verification; datasheet spec validation; developing wafer sort, final test and characterization programs and reliability characterization. Responsibilities include working with Design and Operations teams to create and execute characterization and debug plans for circuit validation, screen development and debug of any non-conformance. Additionally, the group works with the Process and Device teams to develop a yield pareto correlating wafer sort and final test failure mechanisms to bit properties thus defining a path to yield improvement. In addition, during the qualification phase, group responsibilities involve reliability/technology certification (both standard JEDEC and technology specific stresses). Specific responsibilities will include: • First silicon validation, debug, and qualification., • Responsible for developing and implementing test plans, ATE test programs, silicon validation, test methodology concepts, multi-site hardware development, product characterization, and high-volume production support., • Ability to lead teams and projects., • Thrive working in a cross functional environment to define and execute product characterization and validation plans., • Knowledge of magnetic tunnel junction (MTJ) materials and devices is a plus., • Ability to manage and communicate product qualification plans, timelines, status, and results both internally and to external vendors., • Technical point of contact with OEMs and customers Qualifications & competencies • B.S. or M.S. in Physics, Materials Science, or Electrical Engineering, • Experience with the ATE tests systems, probers and test hardware. Experience with testing memory is a plus (DRAM, FLASH, SRAM or any other emerging memory technology)., • Proficient in data analysis tools like JMP and programming languages like Python or C., • Demonstrated track record of product spec validation, reliability characterization, and qualification., • Strong communication skills and the ability to work both independently and in team environment., • Excellent analytical, organizational, and project management skills., • Detail-oriented, organized approach to performing and reviewing work., • Unquestionable ethics – treats people with respect; keeps commitments; inspires the trust of others; works with integrity, • Commitment to our core values of Leadership, Innovation, Communication, Persistence, Enthusiasm, and Respect Physical Demands and Work Environment • Occasionally required to stand, • Occasionally required to walk, • Continually required to sit, • Continually required to utilize hand and finger dexterity, • Continually required to talk or hear, • Occasionally required to lift/push/carry items less than 25 pounds.

Job Description Schedule: Monday - Friday, 9:00 AM - 6:00 PM About the Role: We are seeking an experienced Etch Process Engineer (Quartz & Chamber Focus) to join our quartz spares manufacturing team supporting the semiconductor industry. This role is centered on driving plasma etch process stability, yield improvement, and chamber performance through deep understanding of quartz lifecycle behavior, contamination mechanisms, and plasma–material interactions. The engineer will work cross-functionally with equipment engineering, maintenance, and suppliers to ensure optimal chamber health and consistent wafer processing performance. Key Responsibilities: • Develop and optimize plasma etch recipes for dielectric, polysilicon, and metal layers, • Improve critical process metrics including etch rate, selectivity, uniformity, and profile control, • Perform Design of Experiments (DOE) to optimize process windows and stability, • Manage lifecycle of quartz chamber components (focus rings, showerheads, liners, windows, edge rings), • Define replacement intervals based on erosion, particle generation, devitrification, and plasma damage, • Work with vendors on material purity, machining tolerances, cleaning processes, and refurbishment strategies, • Monitor chamber performance using SPC and particle data, • Identify failure modes including micro-cracking, devitrification, and surface roughening, • Conduct root cause analysis for yield excursions, particle adders, and process instability, • Partner with equipment engineering and maintenance teams on PM schedules and chamber qualification, • Define post-maintenance seasoning and qualification requirements to ensure stable tool performance, • Analyze defect and electrical test data to drive yield improvement and reduce process variation, • Troubleshoot etch issues such as non-uniformity, residue formation, micro-masking, and particle generation, • Correlate quartz wear behavior with yield loss and process drift, • Improve quartz component durability and reduce cost per wafer, • 2+ years of hands-on experience in semiconductor manufacturing with strong etch process experience, • Strong experience with plasma etch tools, processes, and chamber behavior, • Proven experience diagnosing and resolving quartz or ceramic chamber component issues, • Working understanding of plasma etch fundamentals and chamber–plasma interactions, • Hands-on experience with SPC, DOE, and semiconductor metrology tools, • Strong experience driving yield improvement, defect reduction, and process stability through data analysis, • Associate degree (AA) or Bachelor’s degree (BS) in Electrical Engineering, Chemical Engineering, Materials Science, Physics, or a related technical field, • Experience in high-volume semiconductor fabs, • Experience with advanced technology nodes (≤28nm preferred), • Familiarity with quartz refurbishment and lifecycle management strategies Remote (occasional on-site work in California required)

Job Description Position Summary The Data Center Building Engineer provides maintenance support for the Data Center and campus. Operates and maintains all mechanical and electrical systems in the systems and complex. Provides assistance to outside vendors/contractors for specialized maintenance, repairs, and mechanical projects. Provides critical support to facility with 12-hour shifts working a 4 day on 4 days off work week. This position reports to the Facilities Manager. Essential Job Functions • Receives direction from the Building Engineer Lead., • Accountable for infrastructure systems uptime, monitoring critical systems within tolerances, frequent building inspections while providing reliable service delivery to colocation customers., • Operation of all mechanical and electrical systems in a reliable and cost-effective manner for the complex., • Effectively learn and utilize building controls systems of chiller plants, HVAC systems, cooling towers, other water systems, and fire systems., • Provide maintenance support for all mechanical and environmental systems, make repair suggestions, while providing feedback and improvement recommendations for the procedures., • Ability to climb and work from ladders, man hoists or lifts, and the ability to lift and carry heavy loads (up to 50lbs.)., • Contribute to minor repairs and light duty construction which includes physical structures, plumbing systems, wide range of HVAC equipment, and electrical distribution., • Oversees third party activities and services., • Assist in some very basic security related duties. Qualifications • 2-5 years of electrical and mechanical experience working in High Availability (Data Centers, Manufacturing, Hospital) environments., • College/Technical degree preferred but will consider applicants with equivalent work-related experience. Experience: • Electric/pneumatic controls operation., • Assist in the formulation, implementation, and adherence to safety policies and procedures related to the daily operations of the facilities. Participation in safety, knowledge and skills training., • Previous military experience a plus., • CFC refrigeration license a plus. Skills and Abilities • Reading and understanding blueprints, schematics, control ladder drawings and flow charts., • Setup and use test equipment, including volt ohm meters, balancing and alignment equipment, refrigerant leak detection, refrigerant reclaim units., • Requires understanding and principal working knowledge of parallel redundant UPS systems, standby diesel generators, large-chilled water systems, automated controls troubleshooting and setup.

Job Description Resource Innovations is seeking a Senior Application Software Engineer to join our growing Grid Management Software division in Chandler, Arizona. The Grid Management Software team provides best-in-class energy enterprise software products including iHedge and Grid360 for utilities, grid operators and energy resource companies for optimizing electric grid network. The successful candidate will be responsible for development of web-based systems, including requirements gathering, design, implementation, testing, and support. Areas of responsibility may include, but are not limited to, participating in the implementation of business logic, user interfaces, and databases for web-based systems. Resource Innovations (RI) is a women-led energy transformation firm focused on impact. Building on our expertise in energy efficiency, we're constantly expanding our portfolio of clean energy solutions to guide utilities through increasingly complex, connected challenges. Load flexibility. Electrification. Carbon reduction. With every step, we're leading the charge to power change. • Interact with customers, understand the business logic and requirements and create technical design documents., • Develop software applications and interfaces using advanced programming languages, data structures, database and client/server technologies and utilizing modern development tools., • Develop solutions to improve user experience while optimizing code and increasing performance and scalability., • Utilize version control systems like Git to manage code repositories and contribute to deployment processes and automation ensuring smooth and reliable software releases., • Develop and execute unit tests, regression tests and smoke tests to ensure software quality., • Coordinate with the customers and software product development team to evaluate system interfaces, functional and performance requirements of the overall system., • Create and maintain technical documentation including code comments, user guides and API documentation., • Follow best practices for software security to protect against vulnerabilities and ensure compliance with industry standards and regulations., • Other duties as assigned Requirements • Bachelor’s degree in Software Engineering, Computer Science, Electrical Engineering or related field. Master’s degree preferred., • Minimum 4-year experience with implementation and deployment of medium to large systems., • Software design and development experience with following technologies:, • Programming Languages: Java, Javascript, SQL, • Database: Oracle 19c or MySQL, • Data Structures, system design, performance tuning, UML and Object-Oriented Design, • Web application and service: Spring or Spring Boot; JSON and React desirable., • Persistence: JPA (EclipseLink or Hibernate) and JDBC, • Web/Application Server: Tomcat or Spring Boot embedded web server, • Development and test tools: Eclipse, IntelliJ, SQL Developer, Maven or similar, Cucumber or similar testing suite, Shell Script, SVN or Git, • Development platform and Linux, Windows Experience with: • Server and Web Client technologies., • Distributed systems, • Formal development methodologies such as Agile, Scrum or Waterfall., • Producing technical design documents., • Diagnosis and resolution of software issues., • Good communication and teamwork skills., • Should be analytical and be able to troubleshoot applications. About Resource Innovations Resource Innovations (RI) is a women-led energy transformation firm focused on impact. Building on our expertise in energy efficiency, we’re constantly expanding our portfolio of clean energy solutions to guide utilities through increasingly complex, connected challenges. Load flexibility. Electrification. Carbon reduction. With every step, we’re leading the charge to power change. Resource Innovations is an Equal Opportunity Employer, committed to ensuring equal employment opportunities for all job applicants and employees without regard to race, color, religion, national origin, gender, age, disability, marital status, genetics, protected veteran status, sexual orientation, or any other protected status. In addition to federal law requirements, Resource Innovations complies with applicable state and local laws governing non-discrimination in employment in every location in which the company does work. Compensation & Benefits Resource Innovations offers competitive salaries based on a candidate's skills, experience and qualifications for the position. The compensation range for the base salary for this position is $100K - $120K. In addition to base pay, employees may be eligible for a discretionary annual bonus. The stated salary represents the expected compensation for this position. Final compensation will be determined based on factors such as the candidate's experience, education and location. At Resource Innovations, we believe supporting our people is essential to delivering impact. We offer a comprehensive benefits package designed to promote health, financial security, and work-life balance. This includes three weeks of paid vacation annually, paid holidays, a 401(k) retirement plan with employer match, medical, dental and vision coverage, parental leave, an employee assistance program, commuter benefits, and additional supplemental offerings. Employment with Resource Innovations is contingent upon the successful completion of a comprehensive background check and reference check. If applicable to the position, a pre-employment drug screen may also be required. The above job description and job requirements are not intended to be all inclusive. Resource Innovations retains the right to make changes or adjustments to job descriptions and/or job requirements at any time without notice.

Job Description PIC Test Engineer (Wafer Level) Position Description This is a fully onsite opportunity based in Tempe, Arizona. The PIC Test Engineer will support the characterization and evaluation of photonic integrated circuits in a fabrication environment and will work closely with design and manufacturing teams to analyze device performance, improve test methods, and help strengthen foundry capabilities. This role is well suited for someone who brings hands-on experience testing photonic devices and enjoys working at the intersection of engineering development, measurement, and manufacturing. Duties and Responsibilities • Perform optical and electrical characterization of fabricated photonic integrated circuits and evaluate results against expected performance targets., • Analyze test data to identify opportunities for design, process, or test improvements., • Develop, refine, and support automated test procedures where appropriate to improve repeatability and throughput., • Work with optical and electrical characterization tools such as laser swept systems, optical spectrum analyzers, vector network analyzers, lightwave component analyzers, interferometry, and related equipment., • Collaborate with fabrication and design teams to review device behavior, assess fabrication robustness, and support iteration planning for future runs., • Contribute to yield understanding, defect analysis, and overall test methodology improvement., • Master’s degree or Ph.D. in Electrical Engineering, Applied Physics, Photonics, or a related field., • At least 3 years of hands-on experience testing photonic integrated circuits involving fiber optics and/or free-space optics., • At least 1 year of experience with high-speed electro-optic modulator characterization using tools such as VNA or LCA., • Programming ability in Python, MATLAB, or similar tools for data analysis and automation., • Strong knowledge of waveguide theory, coupling mechanisms, and electrical and photonic device physics., • Experience with quantum or nonlinear photonic systems or similar applications., • Experience testing packaged hybrid photonic/electronic devices., • Experience with yield estimation, defect analysis, or failure analysis., • Experience with automated test systems or lab equipment remote control., • Exposure to 5S, Six Sigma, or similar process-improvement methodologies.

Job Description Title: Staff Quality Engineer Department: Quality Revision Date: 4/16/2026 FLSA Status: Exempt Location: Chandler, Arizona Level: P4 Company Overview Comtech Telecommunications Corp. is a leading global technology company providing terrestrial and wireless network solutions, next-generation 9-1-1 emergency services, satellite and space communications technologies, and cloud native capabilities to commercial and government customers around the world. Our unique culture of innovation and employee empowerment unleashes a relentless passion for customer success. With multiple facilities located in technology corridors throughout the United States and around the world, Comtech leverages our global presence, technology leadership, and decades of experience to create the world’s most innovative communications solutions. For more information, please visit . Position Summary As a Staff Quality Engineer, you will play a crucial role in ensuring the reliability and safety of our satellite products. You will work closely with the suppliers, customers, as well as the engineering and manufacturing teams to develop and implement quality control methodologies, perform corrective action investigations, initiate preventive actions, and to help oversee the entire quality assurance process. Responsibilities • Develop, implement, and maintain quality assurance protocols and measures for the manufacturing of satellite systems., • Conduct and lead AS9100 Quality Audits (internal and supplier), • Conduct thorough inspections of materials and components to ensure compliance with specifications and quality standards., • Coordinate with engineering and production teams to identify and resolve quality issues early in the development process., • Leads large, crossfunctional initiatives to drive systemic quality improvements across programs or the entire site., • Resolves the most complex quality issues, including systemic defects, compliance risks, and high‑visibility customer escapes., • Lead complex, site‑wide quality investigations, including MRB, CAPA, and root‑cause analyses, and serve as the technical authority for customer‑driven investigations. Analyze test/inspection results, identify trends in performance data, and recommend improvements or corrective actions., • Review supplier and vendor quality standards and performance, conducting audits as necessary., • Ensure that all quality assurance documentation is accurate and maintained according to industry and regulatory standards., • Stay updated on industry trends, quality assurance methodologies, and regulatory requirements affecting satellite manufacturing., • Facilitate continuous improvement initiatives in the quality assurance process, influencing long‑term quality strategy, risk mitigation planning, and adoption of new tools, technologies, and best practices. Requirements • Strong understanding of quality assurance standards, methodologies, and regulatory requirements in the aerospace industry., • Superior communication skills (written, verbal, presentation)., • Strong analytical ability to interpret complex specifications and technical documentation., • Proven ability to manage multiple concurrent projects and meet tight deadlines., • Proficient in the use of QA tools, FAIRs, software for data analysis, and statistical quality control techniques. Skills • Excellent written and verbal communication skills with all levels of management, • Creative personality with solid training and document creation skills, • Detail oriented, with attention on and adherence to departmental policies, • Flexible, self-motivated and able to work independently in an action-oriented environment, • Ability to complete verbal assignments or written in a timely manner with a high level of accuracy, • Ability to work autonomously with a sense of assessing risk and when to escalate issues, • Problem solving (i.e. 6 Sigma, LEAN, TOC, 8D or FRACAS corrective action), KPIs, DPAS, AS9100, AS9102, ISO 9001:2015, and/or IPC knowledge desirable, • Telecom and/or PCB experience desirable Experience • A minimum of 7-9 years of experience in quality assurance or quality control, preferably in the aerospace, satellite, or high-technology manufacturing sector. Education • Bachelor's degree in engineering, Quality Assurance, or a related field. A master’s degree is preferred. About: This position requires compliance with Comtech’s Drug-Free Workplace Program. Candidates must successfully complete a pre-employment drug screening as a condition of hire. Employees may be subject to random, reasonable suspicion, and post-incident testing. Illegal drug use — including marijuana, regardless of state law — is disqualifying under federal adjudicative guidelines and DoD DFARS requirements. The pay range reflects the expected base salary for this position. Final compensation will be based on role, level, skills, experience, and geographic location. Comtech Telecommunications Corp. is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability protected veteran status or other characteristics protected by law.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do We are looking for a Systems Engineer to join our Operations team! As a Systems Engineer, you will play a pivotal role, recognized for approachability and serving as a key point of contact. This position entails actively contributing to the development of hardware and software test solutions. You will be a part of a group who is responsible for developing diverse hardware and software solutions to test and troubleshoot our esteemed commercial, military, and space products. The day-to-day • Contribute to program responsibilities, including proposal efforts (LOE and ROM), requirements definition, conceptual design, Trade studies, detailed design and drawings, prototype build, integration, and testing., • Participate in the software and hardware development of Standard Test Equipment (STE) for complex systems, ensuring adherence to best practices in requirements analysis, design, development, testing, deployment, and maintenance., • Collaborate closely with teams of all aspects of product development and manufacturing including Operations, Quality, Design and Manufacturing to enhance our testing capabilities for new products and refine existing test devices and methodologies., • Work autonomously and collaboratively within a dynamic, fast-paced environment, where quick turnarounds are essential to team success., • Documentation responsibilities encompass managing requirements using Jama, ability to review electrical wiring diagrams, PWA schematics, mechanical assembly drawings, and, Bills of Materials (BOMs)., • Conduct peer reviews of electrical and mechanical (EE and ME) and software documentation., • BA/BS in an engineering discipline or equivalent experience., • 5+ years of experience in designing complex production test systems compromised of electrical, mechanical and software components., • Proven expertise in system design, including gathering and deriving system requirements, verification and process validation., • Demonstrated ability to conceptualize, design, implement, and test complex RF, software, electrical, and mechanical systems., • Proven track record of coordinating interdisciplinary technical teams across multiple projects, performing analysis, making trade-off decisions, and utilizing formal project management techniques., • Strong fundamentals in Electrical, Mechanical, and Software Engineering., • Working knowledge of Test Equipment, including but not limited to O-Scopes, Spectrum Analyzers, Network Analyzers, Logic Analyzers, and Signal Generators., • Excellent written and verbal communication skills, including exceptional design review presentation skills., • Ability to work autonomously with minimal instruction, balanced with the ability to seek assistance when needed., • Strong interpersonal skills., • US citizenship required., • Up to 10% travel is required., • MS in an engineering discipline., • Experience in System Testing and Production Testing at various volume levels., • Experience in SW Development lifecycle including use of CI/CD and SW repositories., • Experience designing Test Fixture and Interface Test Adapter (ITA) designs that meet performance, cost, and manufacturability goals., • Security Clearance #LI-BBS Salary range $95,000.00 - $149,500.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $117,500.00- $176,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do Viasat's Space Infrastructure Team designs, builds, and operates satellites that deliver global connectivity in demanding environments. Your work within the integration and test team will directly impact payload performance, schedule, and onorbit mission success. This role is for a Senior AI&T (Assembly Integration and Test) Engineer focusing on Array RF Testing. In this role, you will lead RF test development and validation for advanced space based phased array communications payloads. You will be responsible for defining how array performance is characterized, verified, and productionized across engineering and flight builds. This role sits at the intersection of RF design, systems engineering, and test, with primary responsibility for validating phased array performance. You will design and deploy scalable RF test solutions capable of measuring full-array and subarray performance, translating system requirements into repeatable validation strategies. This includes driving verification of key antenna metrics such as radiation patterns, EIRP, G/T, SNR, EVM, ACLR, beam steering accuracy, and calibration stability. You will work closely with the product design teams, located in both Europe and the US, to interpret module requirements and turn them into corresponding test plans and test equipment requirements. You will work closely with systems engineering and manufacturing teams to ensure array performance meets specification across temperature, environmental stress, and production variation. The day-to-day Architecture & Validation Strategy Develop and maintain RF test architectures for active phased array systems Define validation strategies for beamforming, calibration, and performance at unit and integratedpayload levels Test Solution Development & Automation Design and implement test solutions for radiation pattern measurement, conducted RF validation, and overtheair characterization Develop automation software in Python or similar languages to control units under test, instrumentation, and data systems Data Analysis & Troubleshooting Analyze RF data to assess gain, linearity, noise performance, phase coherence, and beam steering accuracy Drive rootcause analysis of RF performance issues and provide design feedback to improve yield and robustness Support environmental and qualification testing from an RF performance standpoint Operate as a handson engineer, moving between architecture discussion, detailed RF debug, and datadriven performance analysis CrossFunctional Collaboration & Scalability Interface with mechanical, digital, firmware, and manufacturing teams to ensure test coverage supports production scalability Present performance results and technical trade studies to engineering leadership What you'll need • 8+ years experience in RF test and validation, • Experience with space-based or high-reliability phased array systems (satellite, radar, or equivalent), • Bachelor's degree in Electrical Engineering or equivalent experience, • Deep understanding of antenna arrays, beamforming concepts, and RF signal chains, • Strong experience with RF test equipment including spectrum analyzers, vector signal analyzers, vector signal generators, and network analyzers., • Strong experience with over-the-air testing (near field and far field), • Demonstrated experience architecting automated RF test systems, • Experience troubleshooting complex RF systems and driving root cause to resolution, • U.S. citizenship required, • Demonstrated endtoend ownership of complex test systems, from concept through deployment, with clear accountability for outcomes, • Experience with active electronically steered arrays and digital beamforming architectures, • Background in over-the-air (OTA) test methodologies and compact range or near-field measurement systems, • Familiarity with calibration strategies for large scale arrays, • Experience supporting environmental qualification testing of spaceflight RF hardware, • Experience transitioning RF test solutions from engineering development to production environments $141,500.00 - $224,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $176,000.00- $264,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do Viasat's Space Infrastructure Team designs, builds, and operates satellites that deliver global connectivity in demanding environments. Your work within the integration and test team will directly impact payload performance, schedule, and onorbit mission success. This role is for a Senior AI&T (Assembly Integration and Test) Engineer focusing on Payload Special Test Equipment (STE). You will own the end-to-end STE strategy for space-based communications payloads, serving as the technical authority for all payload STE infrastructure. This role leads the architecture and implementation of STE across development, qualification, and flight builds, ensuring test systems are robust, scalable, and flight-ready from early development through launch. Working closely with the product design team, you will interpret unit, module, and payload-level requirements and translate them into comprehensive verification strategies. This includes developing test plans, designing and integrating test equipment, and delivering automated test and checkout procedures that enable reliable, repeatable validation of payload performance and readiness. The day-to-day Architecture & Requirements: Define and maintain STE architecture for RF, digital, telemetry, timing, and power; derive STE requirements from payload specs/functionality, and create verification plans Development & Integration: Lead development of hardware, software, harnessing, interface electronics, and automation; establish checkout flows from unit subsystem payload Operations & Readiness: Select/integrate COTS vs. custom instrumentation; review/approve readiness and certification procedures; support environmental testing and launch ops Reliability & Governance: Lead anomaly investigations; maintain configuration control and documentation What you'll need • 8+ years of experience in STE design supporting space-qualified hardware, • Demonstrated experience architecting or leading complex test systems for payload or satellite, • Strong understanding of communications payload and satellite subsystems, • Hands-on experience with payload or satellite STE through integration., • Proven ability to work cross-functionally and lead technical discussions under pressure., • Bachelor's degree in Electrical Engineering or equivalent experience, • U.S. citizenship required, • Demonstrated ownership of complex systems from concept through execution, • Experience supporting environmental tests and launch campaigns., • Experience building scalable, multi-bay checkout systems rather than one-off lab benches, • Proficiency in Python, C#, C++, or similar languages for automation, • Familiarity with vector network analyzers, spectrum analyzers, signal generators, power meters, and noise figure measurement systems $141,500.00 - $224,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $176,000.00- $264,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do We are seeking an experienced RF Engineer with deep expertise in frequency synthesis to contribute to D2D and future payload architectures. This role delivers hands-on engineering in PLL design, VCO development, and low phase noise reference oscillator systems, including vendor oversight and clock distribution. The position operates with limited supervision on defined RF programs and applies strong technical judgment to ensure design, integration, and performance success. The day-to-day • Design and develop frequency synthesis architectures, including PLLs, VCOs, and low phase noise reference oscillator subsystems, • Perform RF analysis, simulation, and validation to ensure compliance with performance requirements, including phase noise, jitter, and spectral purity, • Lead schematic capture and design implementation for frequency generation and clock distribution circuits, • Define and optimize clock distribution networks for low jitter and minimal coupling across RF subsystems, • Provide technical oversight of oscillator vendors, including specification definition, performance evaluation, and qualification, • Support integration of RF hardware with reference oscillator systems and spacecraft subsystems, • Contribute to RF architecture trade studies, particularly around frequency planning, LO generation, and phase noise optimization, • Interface with suppliers and manufacturing partners to support RF hardware production, validation, and component selection, • Participate in RF design reviews, test readiness reviews, and anomaly resolution efforts, • Identify RF performance risks (e.g., phase noise, spurs, coupling) and develop mitigation strategies What you'll need • Bachelor's degree in Electrical Engineering or related field, or equivalent professional experience, • 8+ years of RF engineering experience supporting frequency synthesis hardware, • Demonstrated expertise in PLL design, VCO design, and reference oscillator selection/integration, • Strong experience with clocking systems, frequency generation, and signal integrity, • Experience working with vendors and manufacturing partners, including oscillator suppliers, • Ability to work independently on defined technical problems with minimal instruction What will help you on the job • Experience supporting spacecraft or payload RF frequency generation systems, • Familiarity with reference oscillator integration and production environments, • Deep understanding of phase noise, jitter, and frequency stability analysis, • Strong analytical skills and disciplined documentation practices, • Clear communication of complex RF and frequency synthesis topics to cross-disciplinary teams #LI-GS1 Salary range $141,500.00 - $224,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $176,000.00- $264,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do We have an exciting opportunity for an Electrical Engineer to join our Viasat Global Networks - Operations team! We are looking for someone who is eager to contribute to a small, fast-paced team. You will help design/construct automated Specialized Test Equipment (STE) including wiring diagrams, interface PWA schematics, and related documentation. You will work with electrical, mechanical, system, software, and test engineers on a variety of projects, supporting both new developments and sustaining engineering. The day-to-day • Create Interconnect drawings in SolidWorks Electrical including component selection and cabling to satisfy project requirements, • Design of cables to satisfy project requirements, • Select RF components and perform RF measurements to validate your designs, • Selection of test equipment including trade studies, • Configuring first-build STEs including cabling, software/test equipment installation & configuration, and creating redlines/as-built documentation, • Design/test interface PWAs, including schematic capture, parts selection, PWB layout review, and first article DVT, • Support remote engineers/software developers in their use of on-site STE, • Bachelor's degree in EE, a related field or equivalent years of experience., • 2-4+ years of Electrical and Mechanical aptitude/technical skills, • Knowledge of proper tool and test equipment usage such as oscilloscopes, signal generators, and network analyzers, • Practical experience in cable design/build, electrical standards, and interface technologies/standards, • Attention to detail, • Must be flexible in task completion based on shifting priorities, • Operates with a sense of urgency while maintaining quality control, • Good written and verbal communication skills, • Ability to lift 50 pounds, • Color vision for electronics products that include color-coded wiring, • US citizenship is required, • Sufficient experience using Microsoft Office programs, • Experience using Oracle Agile PLM System, JAMA, and Jira, • Experience with DxDesigner, SolidWorks Electrical, or similar programs, • Knowledge of PWB layout concepts $104,500.00 - $164,500.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $129,000.00- $194,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

GAI is seeking a highly skilled and experienced QA/QC Protection & Control Engineer 2 to oversee QA/QC on design, development, and implementation of protection and control systems for high-voltage substations. This role will serve as a QA/QC specialist only within the engineering team, ensuring that all protection and control designs meet regulatory standards, project requirements, and industry best practices. We value work-life balance and offer flexibility - this position can be performed in a hybrid capacity in these locations: Overland Park, KS, Pittsburgh, PA, Lisle, IL, Orlando, FL, or in a fully remote capacity. Job Duties: • QA/QC the engineering design and review of protection and control systems for transmission and distribution substations (typically 69kV to 500kV)., • QA/QC protection schemes including one-line diagrams, three-line diagrams, control schematics, and wiring diagrams., • QA/QC protection and control drawings to interface with the physical layout and design of substations., • QA/QC of control and relay panel layouts including assembling the specifications., • QA/QC of design specifications including the overall bill of materials., • QA/QC on the design and sizing of auxiliary systems including AC/DC load centers as well as batteries and chargers., • QA/QC the design and sizing of conduit, cable, and backup generators., • Review junior engineer's designs, verify they meet client standards and specifications, and identify gaps in client's protection., • Applies broad knowledge of principles and practices in a specific practice area., • Independently evaluates, selects, and adapts standard techniques, procedures, and criteria., • Acquires general knowledge of principles and practices of related fields, and ability to function on multidisciplinary teams., • Driver's License, • Designs a complete project, system, component, or process., • Prepares complete plans, specifications, and other project documents., • Designs and conducts analyses and interprets test data., • Assigns tasks to other technical and non-technical staff., • Plans and coordinates detailed aspects of the engineering work., • Prepares scopes, budgets, and schedules for assignments., • Receives general direction on key objectives. Receives guidance, when necessary, on unconventional/complex problems, direction on modified techniques, and new approaches on assignments with conflicting criteria., • Mentors junior staff by providing guidance, explaining professional responsibilities, and reviewing work products, • Ability to work indoors in professional office settings., • Ability to sit for extended periods while performing computer-based tasks., • Frequent use of hands and fingers for typing, writing, and handling office equipment., • Visual acuity to read printed materials, digital screens, detailed documents, and perform detailed work., • Occasional standing, walking, bending, or reaching within the office environment. Ability to move between workstations and attend in-person meetings., • Ability to lift and carry office materials or equipment weighing up to 10-20 pounds, with or without assistance., • Adequate hearing to participate in conversations, phone calls, and virtual meetings. GAI offers skilled professionals like you an exceptional place to work, grow, lead, and achieve. Explore an array of opportunities in locations across the U.S. and join accomplished colleagues in tackling challenging projects for a range of markets. Enjoy work location and scheduling flexibility; your choice of comprehensive, personalized benefits; a range of employee wellness programs and discounts; and more. Feel good about being part of a collaborative team that's committed to supporting the communities we serve. Join GAI and distinguish yourself in a company poised for unlimited growth. Benefits To Working at GAI Include: Competitive Pay & Recognition • Market based, competitive compensation, • Medical, dental, and vision plans, • Company paid short-term and long-term disability, • Company paid life insurance, • Generous paid time off + 7 paid holidays, • An additional floating holiday-use it for what matters to you, • 401(k) with company match EducationBachelors of Engineering (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do We are thrilled to announce an exciting opportunity for an onsite Value Engineer to join our dynamic team in Carlsbad, CA, Tempe, AZ, Germantown, MD or Duluth,GA! You will be responsible for coordinating all Design-to-Cost aspects of a given product development, and continuous improvement. You will collaborate with many engineering teams such as Electrical, Mechanical, PWA Design & Fabrication, Assembly, New Product Introduction, Component, Industrial, Test, Cable and Qualification Engineering as well as Supply Chain to ensure cost and quality are optimized to deliver a robust and competitive product. The day-to-day • Drive design decisions and changes with the Engineering Design and Reliability teams to reduce cost and complexity, while maintaining sufficient design margin, • Engage the various Manufacturing subject areas such as Mechanical/Assembly, Test and Industrial Engineering to optimize the Production processes for cost, efficiency and quality., • Ensure qualification and regulatory compliance for each Viasat internally designed product, • Refine the Bill of Material (BOM), leveraging Supply Chain and Component Engineering, to minimize cost and maintain quality., • Provide a vision for a strategic manufacturing approach that optimizes existing factory assets and processes to minimize production non-recurring engineering costs., • Drive/participate on product make buy decisions., • Understand the customer experience, including installation, operation, removal and repair and optimize the Viasat product lines for those activities., • Manage the product lifecycle, identify and implement continuous improvement and engineering changes for all phases of the lifecycle from inception to End of Life, • Support After Market Services by monitoring field returns and proactively addressing reliability issues and championing continuous improvement both for cost and performance., • 10 years or more of an engineering field that lends itself to Value Engineering role., • A well-rounded Hardware engineering competence., • Demonstrated success/examples of driving cost out of products., • A fundamental understanding of Reliability concepts including MTBF, HALT, ALT, ect., • Experience taking a product into Production and/or cost optimization of an existing product with proven collaboration with Operations., • A detailed understanding of the different technical facets of Operations including Manufacturing, Test, Fabrication and Production., • Experience working with supply chain to provide cost and technical recommendations on supplier selection, make vs buy trade, etc., • Technical finance experience to support activities such as Return on Investment, etc., • Experience developing supplier contractual language such as Statements of Work, Memorandum of Understanding, ect., • Experience working with external contract manufacturers, custom semi-conductor foundries or other critical suppliers., • Capable of providing technical support and recommendations across multiple and simultaneous product developments and sustaining activities., • Leadership, communication and organizational skills are essential., • Bachelor of Science or equivalent experience in Mechanical, Electrical, Manufacturing, Industrial, Aerospace Engineering, Physics, or other related field., • Master of Science or equivalent experience in Mechanical, Electrical, Manufacturing, Industrial, Aerospace Engineering, Physics or other related field., • Mid to high volume product design experience., • Demonstrated risk mitigation planning and execution., • Experience with an Original Design Manufacturer (ODM) engagement., • Experience with semiconductor technical management., • Previous experience with 3GPP product designs., • Understanding of the theory of satellite communications., • Previous international contract manufacturing and supplier management experience. $180,500.00 - $285,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $224,500.00- $336,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do We are seeking an experienced Senior Power Electronics Engineer to provide critical technical ownership and continuity for power electronics architecture, design, and qualification following the retirement of a key subject matter expert. This P5level role is essential to sustaining and advancing power supply capability that underpins Gemini payload reliability and overall program success. This position serves as a senior individual contributor and technical authority, working on complex and highimpact power electronics hardware across flight payloads, spacecraft subsystems, and supporting ground systems. The role requires independent judgment, endtoend ownership, and close collaboration with multidisciplinary engineering teams to deliver reliable, highperformance hardware in a harsh space environment. The day-to-day • Provide seniorlevel engineering leadership in the architecture, design, analysis, and testing of power converters for harsh and highreliability environments, • Own power electronics system and subsystem design trades, requirements definition, and technical decisionmaking with minimal supervision, • Lead schematic design, component selection, and topology selection for power conversion hardware across a wide range of voltages and power levels, • Design, analyze, and support custom magnetics, including wirewound and planar inductors and transformers, • Define, plan, and execute verification, qualification, and environmental testing for power electronics hardware, • Perform and review modeling, simulation, loop stability analysis, and control compensation design, • Act as the technical escalation point for design challenges, anomalies, and failure investigations, including root cause analysis and corrective actions, • Work closely with systems, payload, PCB, mechanical, thermal, manufacturing, and test engineers to deliver integrated solutions, • Mentor and technically guide other engineers, helping preserve and transfer institutional knowledge in power electronics, • Bachelor's degree in Electrical Engineering or a related technical field, • 10+ years of progressive experience in power electronics design and development, • Demonstrated experience owning designs from concept through qualification and release, • Strong handson experience with magnetics design and power component selection, • Proven ability to work independently, define technical approaches, and obtain results with minimal direction, • Experience with modeling, simulation, laboratory testing, and hardware debug, • Strong written and verbal communication skills, • US Citizenship required, • Master's degree in Electrical Engineering or a related discipline, • Strong grasp of analog control systems and discrete logic, • Experience with voltagemode and currentmode control and compensation techniques, • Broad knowledge of power conversion architectures and the ability to select optimal solutions for complex constraints, • Experience designing for fault tolerance, reliability, and derating, • Familiarity with FMECA and reliabilitydriven design practices, • Experience with impedance measurement and loopgain measurement in a laboratory setting, • Familiarity with spacecraft electrical power systems, including radiation effects, • Knowledge of solar arrays, battery systems, and energy storage safety considerations $198,500.00 - $314,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $247,000.00- $370,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do We are seeking an experienced 5G Devices Staff Hardware Engineer to lead the hardware design of 5G NTN devices operating on Viasat networks. This role is responsible for creating reference hardware designs, a modular hardware design that enables integration of market-specific hardware submodules, and ensuring robust, secure, and high-performance custom devices for a variety of applications including automotive, aviation, and maritime markets. This position focuses on 5G device/User Equipment (UE) hardware architecture and integration, distinct from 5G RAN (gNodeB/base station) or 5G Core network hardware roles. Candidates should have experience with device-side hardware, COTS chipset integration, and hardware security features. The day-to-day Chipset Evaluation & Selection • Evaluate and benchmark COTS 5G NTN chipsets from leading vendors for use with Viasat's network., • Analyze, understand and help influence chipset roadmaps, feature sets, and vendor support to inform hardware platform decisions., • Define (generate requirements), architect and develop cost effective reference hardware designs for 5G NR-NTN terminals (UE) for non-consumer markets., • Develop hardware design guidelines, best practices, and documentation for OEM/ODM partners., • Integrate COTS 5G chipsets, including satellite and terrestrial connectivity modules., • Design and validate hardware interfaces with specific submodules (e.g., eSIM, GNSS, secure elements, RF front-ends)., • Lead the integration of hardware-based root of trust, secure boot, and trusted execution environments., • Oversee hardware bring-up, validation, and debugging of reference and custom platforms., • Collaborate with software and firmware teams to ensure seamless hardware-software integration., • Develop and execute test plans for performance, reliability, and regulatory compliance (FCC, CE, carrier certifications)., • Interface with internal business to collaborate on future product portfolio roadmap., • Work closely with chipset vendors, contract manufacturers, and internal engineering teams., • Provide technical guidance to partners and internal teams on hardware integration best practices., • 8 - 10+ years of HW and Mixed Signal design competence leveraging 5G chipsets into user equipment (UE) products., • Bachelor of Science in Electrical Engineering, Physics, or other related engineering discipline., • Demonstrated experience taking designs from paper to product including defining requirements, analytical/simulation design, schematic & BOM creation, design validation and into Production., • Understanding of Communications Theory and Wireless Communication and how they apply to the design of the UE., • Previous background developing support documentation such as design guidelines, test plans, test procedures, design and integration guides, ect., • Proficiency with design process including Specification Requirements Review (SRR), Preliminary Design Review (PDR), Critical Design Review (CDR), Implementation Complete Review (ICR) and Production Readiness Review (PRR)., • Exposure supporting Contract Manufacturers (CM), OEM's and/or ODM's., • Understanding of regulatory requirements that impact the UE design and production., • Problem-solving skills to isolate and resolve complex UE issues when operating within the network., • Ability to provide technical support across multiple and simultaneous product developments and sustaining activities., • Aptitude to provide contingency work arounds to preserve schedules., • Previous experience providing cost and schedule estimates for both new proposals and sustaining activities., • Sound communication and organizational skills., • Demonstrated design discipline and rigor., • Master of Science in Engineering is preferred., • Strong mechanical aptitude. $141,500.00 - $224,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $176,000.00- $264,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do The Packaging Engineer position requires handling all aspects of packaging development. This means planning, crafting, and developing advanced or novel packaging. The role also involves managing packaging efforts related to radio frequency communication devices. The products range from IC's, System In Packages, sub-assemblies, and modules. The packaging development process includes package definition, stack-up, substrate layout, bond diagram, drawings, predictive modeling combined with system testing, technical risk/cost assessment, materials and process characterization, compilation of formal documentation, collaborating with sub-contractors and internal assembly and reliability resources, and final release of product. The day-to-day Job responsibilities include but not limited to: • Working closely with project development teams and product groups (RFIC, MMIC, Module) to develop the next generation/sophisticated/novel packaging solution for RF communication products, • Define packages and materials that meet product requirements for reliability, performance, manufacturability, and cost., • Ensure all packaging work is completed for New Product and New Technology Introductions, • Develop and manage packaging documentation including SOWs, package drawings, and process flows, • Build and layout of semiconductor packages including QFN, SiP, WL-CSP, RDL, Flip Chip, FO-WLP and Interposers, • Ensure early success in package development with modeling and simulation for thermal, mechanical, and electrical, • Technically oversee vendors in the manufacture of said packages in conjunction with manufacturing engineers, • apply your assembly knowledge of die attach, Wirebond, bumping, overmolding to advise product groups on options available to solve problems, • identify suitable IC, sub-assembly, and module package options and perform feasibility studies for new products, • interact with product groups for package/cost optimization along with mechanical engineering, • specify and conduct reliability testing by vendors to insure the reliability of the packaged product, • Coordinate package related activities across multiple organizations including Marketing, Design, Applications, Test, Assembly Engineering, Quality, and Manufacturing (internal and external factories), • Address and solve materials and processing issues that may occur during the development process, • Manage the package process using industry standard project management tools., • 10+ years in semiconductor packaging including experience in package assembly process, package engineering, quality & reliability and the intersection/relationship of packaging to test., • Bachelor's Degree in Electrical, Mechanical, Materials Engineering or related technical discipline, • Deep understanding of micro-electronic package structure, mechanical, electrical and thermal performance., • Solid grasp of heat transfer and its relation to material properties, • Packaging knowledge in RFIC, millimeterware, System In Package, sub-assembly, and/or modules., • Experience in semiconductor package design with demonstrated experience in one or more of the following: QFN, SiP, BGA, WL-CSP, Flip Chip and Bumping or FO-WLP, • Strong understanding of Die Prep, Assembly (die attach, Wirebond, flip chip, etc) and Surface Mount Technology (SMT) process-equipment is desired., • Have a high tolerance for ambiguity and solid interpersonal skills, • In-depth knowledge of interconnect reliability daisy chain testing, CPI and BLR., • Understands the metallization schemes for laminates, interposers and SMT., • Knowledge of statistical methods and Building of Experiments, • Must be able to work autonomously and help determine methods and procedures., • Customer service oriented., • Ability to work with build teams to translate IC/system requirements input packaging configurations, • Ability to manage and drive packaging, • US Government position. US Citizenship required, • Ability to travel up to 10% This is an onsite role based in Tempe, AZ #LI-BBS What will help you on the job • Strong Preference for RF, Microwave or mmWave experience, • Experience with package build software like Cadence APD/SiP, • Experience with electronic compose and layout tools such as Cadence Concept HDL, Mentor Graphics DxDesigner, or Zuken, • Prior volume OSAT experience is highly desired, • Experience in ITAR and Mil programs, • SolidWorks tool usage, • Knowledge or exposure of wafer to wafer bonding, • Knowledgeable about ATE, • IMAPs and/or MEPTEC membership, • Knows the latest semiconductor packaging trends., • Understands MIL-STD-883 and JEDEC requirements. $155,500.00 - $246,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $193,500.00- $290,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do Viasat is looking for a dynamic Mechanical Engineer with satellite thermal analysis experience to join our growing team. In this exciting role, you will be responsible for both thermal analysis of the satellite and design, documentation, and testing of electronics hardware. The day-to-day The day-to-day work encompasses building thermal models of satellites and providing thermal boundary conditions for payload units. You will also provide inputs for improving the thermal performance of the satellite. To supplement the thermal analysis work, you will also design electronics packaging for space. This includes CAD modeling, drawing creation, thermal and structural analysis, and build and test support. You will work directly with a diverse staff including engineering, program management, supply chain, manufacturing, and quality assurance to manage product development. What you'll need • 8+ years of experience in Mechanical Design Engineering and satellite level thermal design., • Experience performing mechanical testing on packaged electronics such as shock, vibration, and thermal vacuum., • Design experience creating 3D parts and assemblies using SolidWorks, Creo, NX, or similar tools., • Electronic packaging for space environment experience., • Experience in creating and analyzing models in thermal analysis software (Ansys, Thermal Desktop, or similar)., • Experience with thermal analysis using Ansys (electronics packaging), and Thermal Desktop or Simcenter SST (SV analysis)., • Proficiency in MS Word, Excel, and Power Point., • Strong communication skills - both verbal and written., • Bachelor's degree in mechanical engineering or a similar relevant engineering degree., • U.S. Citizenship Required., • Packaging for a space environment., • Experience with Creo/ProE., • Experience with procedures for handling space flight hardware., • Experience with creating assembly drawings and work instructions., • Experience with EPDM software $141,500.00 - $224,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $176,000.00- $264,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do You will join the Content Delivery Platform team, working to deliver excellent in-flight connectivity services for our airline customers and passengers by optimizing video streaming experiences. The CDP team designs, implements, tests, and operates systems critical to customer experiences with a focus on Linux applications. You will work with the rest of the team to develop new, creative solutions for applications that play a direct role in enhancing customer experience. Operating under a DevOps model, the team is responsible for supporting existing software and platforms used by commercial airline passengers every day. As a senior engineer, your responsibilities will be to provide your domain expertise to guide team decisions, make strong technical contributions, and mentor junior staff. This role is for an experienced software engineer who can work with the team to identify and define novel problems, then implement a solution autonomously. The day-to-day The team maintains embedded software deployed across several areas of Viasat's network as well as the monitoring and testing infrastructure to operate it. You will • Serve as a Domain Expert, • Design and implement software written in C, with a focus on measurable performance and scalability in a resource-constrained environment, • Provide clear direction on technical decisions that prioritize excellent customer experiences and bandwidth usage optimizations, • Maintain a robust test infrastructure and deployment pipeline that focuses on finding issues early, • Respond to production issues through an on-call rotation, implementing break fixes and designing long term solutions to issues, • Ensure team is using modern development practices, helping incorporate new methodology and tooling when appropriate, • Find opportunities to improve product reliability and security, • Lead or participate in technical design reviews, • 8+ years of professional software engineering experience, • Expertise with software development in C/C++, • Experience with Linux and Networking concepts, • Experience writing and communicating technical designs, • Experience with modern CICD and DevOps practices, • Ability to work with high level requirements to lead design and implementation of large-scale distributed service architecture, • Detailed problem-solving approach, coupled with a strong sense of ownership and drive, • Experience with container technologies (Docker, Kubernetes), • Experience with Nginx configuration and module development, • Experience with Cloud services (AWS, GCP, etc.), • Ability to work on distributed agile teams with a high degree of self-motivation and independence, • Experience with using AI tooling in software development $165,000.00 - $260,500.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $205,000.00- $307,000.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do The Strategic Space Systems (S3) team at Viasat in Tempe, Arizona is responsible for development of full lifecycle space programs with varying scope, from chip scale to full-on space missions. Our programs provide key capabilities for the US government as well as commercial end-users. Programs in the business area are far-reaching and impactful - enabling the US and the world in commercial and defense applications like resilient space communications and networking, remote sensing, and much more. The S3 team is primarily composed of a small group of highly skilled cross-domain engineers who take on challenging problems daily. The role of a Space Mission Systems Engineer within our S3 group is to bridge all the areas of a space mission - space, ground, launch, and support segments. Space Systems engineers in the group will conceptualize, design, develop, build, integrate, & test, flight hardware for an end-customer. In many cases, we operate the unique missions on-orbit as well. The day-to-day • Cradle-to-grave space mission development from mission concept to on-orbit operations, • Develop Space system budgets (RF link, data, power, mass, delta-V, propellant budgets), • Conduct System Analyses & Trade Studies (orbits, constellations, accesses, flight profiles), • Manage System Requirements (Definition, Flow-down, Management, Verification & Validation), • Develop a specification & statement of work to procure a spacecraft bus for various missions, • Manage spacecraft bus vendors and learn their platform as they develop and execute a contract, • Work with space flight hardware as you prepare for and conduct Space Vehicle Assembly, Integration, & Test (AI&T), • 2+ years' Space / Mission Systems engineering experience, • Proven experience with a flight spacecraft/mission delivery or flight space hardware delivery effort, • Bachelor's degree in Space Systems Engineering, Aerospace Engineering, Electrical Engineering, Mechanical Engineering, or equivalent professional experience, • U.S. Government Position; U.S. Citizenship Required, • Active TS Clearance with ability to obtain TS/SCI when administratively feasible, • Active TS/SCI Clearance, • Professional or academic experience with Ansys/AGI System Tool Kit (STK), • Experience with using Mechanical/Electrical CAD tools, • Experience with software/code development using IDEs / text editors, • Mathematical modeling and analysis, • Experience using Git, SVN, Perforce, or other version control tools, • Experience with requirements management & system definition (Cameo, Jama, DOORS, etc.), • Space mission contract experience - proposal development, government contracts, and/or spacecraft bus procurement experience $120,500.00 - $190,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $149,500.00- $224,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

About us One team. Global challenges. Infinite opportunities. At Viasat, we're on a mission to deliver connections with the capacity to change the world. For more than 35 years, Viasat has helped shape how consumers, businesses, governments and militaries around the globe communicate. We're looking for people who think big, act fearlessly, and create an inclusive environment that drives positive impact to join our team. What you'll do Join a fastpaced team within Viasat's Government Space and Advanced Technologies group as a MidLevel Systems Engineer. In this role, you will: • Support systemlevel build and analysis for communication and sensing systems., • Contribute to algorithm development for signal processing, control theory, and system optimization., • Assist with waveform develop and performance evaluation., • Translate mission needs into technical requirements and engineering solutions., • Implement and test algorithms in firmware or software under mentorship from senior team members., • Participate in integration and system bringup activities., • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field; Master's preferred., • With a Master's degree or comparable experience, have 3-5 years working on system building, modeling, or algorithm development. Or, possess 5-7 years of applying these skills with a Bachelor's degree or similar background., • Proficiency in C++, C, MATLAB, or Python for crafting and running simulations., • Knowledge of RF systems, processing and waveform concepts., • Strong communication and teamwork skills., • Active US Secret; Top Secret Clearance preferred, • Willingness to travel up to 10% This is an onsite role based in Tempe, AZ or Carlsbad, CA only What will help you on the job • Hands-on experience with digital hardware platforms (processors, memory, FPGAs, CPLDs, microcontrollers, networking interfaces).Familiarity with systems engineering processes, including requirements flow-down, verification, and validation., • Experience collaborating with geographically distributed teams, driving integration across hardware, software, and algorithmic domains., • Background in modeling and simulation tools, supporting trade studies and performance optimization for sophisticated system architectures. $120,500.00 - $190,000.00 / annually. For specific work locations within San Jose, the San Francisco Bay area and New York City metropolitan area, the base pay range for this role is $149,500.00- $224,500.00/ annually At Viasat, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, and experience. Additional cash or stock incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits, dependent on the position offered. Learn more about Viasat's comprehensive benefit offerings that are focused on your holistic health and wellness at . EEO Statement Viasat is proud to be an equal opportunity employer, seeking to create a welcoming and diverse environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, ancestry, physical or mental disability, medical condition, marital status, genetics, age, or veteran status or any other applicable legally protected status or characteristic. If you would like to request an accommodation on the basis of disability for completing this on-line application, please click ___.

Job Description The company's Broad Reach produces spaceflight hardware and software solutions, integrating vehicle design, component design and engineering services for aerospace, scientific, commercial and military customers on four continents. From proposal phase to ground testing, launch and on-orbit operations, we support each mission as scientific, technical and operational facilitators. On the product side, our radiation-hardened avionics and electronics include GPS/GNSS receivers, science payloads, motor controllers, high-quality flight-critical components, and single board computers powered by the next-generation BRE440 “system-on-a-chip” – the world’s highest-performance radiation-hardened microprocessor. With global product demand and mission criteria moving toward integrated commercial partnerships, lower costs and higher performance hardware and software requirements, the company's Broad Reach is positioned for growth in the new era of aerospace development. Our team of seasoned architects and engineers is dedicated to partnership with our customers for continued growth and success. We are looking to hire an electronics-focused Systems Engineer who will work with engineers, business development, and finance personnel to provide technical and cost solutions for external customers. Job Duties: As a Systems Engineer, you will be part of the business development team that responds to customer inquiries about custom and existing products. This will involve tasks such as, architecting electronic systems and solutions, responding to customers request for proposals, coordinating customer meetings, reviewing requirements and statements of work, generating cost and schedule information, and participating in the new program transfer process to the engineering production team. Required: BS degree in Electrical Engineering Minimum of 5 years’ experience in electronic engineering or development, preferably in space digital electronics or commercial high-speed digital products such as high-performance single board computers Motivated and willingness to learn Excellent communication skills Experience with technical writing and proposals Knowledge of the design, assembly, and test phases of electronic product development Experience with cost estimation methods Ability to multitask in a demanding business development environment and meet important deadline commitments This position requires access to United States Export Controlled information.

Job Description The Manufacturing Engineer III is a Senior Engineer, responsible to develop and drive quality-driven manufacturing systems, processes and equipment for the production of new and existing products. The Manufacturing Engineer III mentors and provides leadership to lower level Engineers. Essential Duties and Responsibilities • Mentors and trains a team of Manufacturing Engineers, • Develops processes for the efficient production of harness systems and electro-mechanical assemblies, • Creates and maintains work instruction to optimize manufacturability, • Problem solves and recommends solutions for internal production issues and customer design issues, • Leads engineering efforts for New Product Introduction, • Not limited to DFx, Risk assessment, Product flow, line balancing, etc., • NPI schedule and execution input, • Designs and implements tools and fixtures required for effective manufacturing, • Investigates, recommends, justifies and implements new equipment purchases, • Manages process and documentation changes as required by internal and customer-driven engineering changes, • Interprets drawing packages and internal BOMS, and audits for accuracy, • Provides expert technical support to production teams, • Supports purchasing, quality, test and production departments to ensure product integrity is maintained, • BS in Engineering or related field or equivalent professional experience, • Minimum 8 years Manufacturing Engineering experience, • Minimum 3 years Defense and Aerospace Electronics Manufacturing Engineering experience, strongly preferred, • Strong written and verbal communication skills, • Excellent organizational skills, • Excellent computer skills. Proficient in Microsoft Office applications, • Experience with Lean manufacturing, • Ability to occasionally lift up to 50 pounds

Job Description JOB DESCRIPTION Quality Control TechnicianJob Description Summary of Position: We are seeking a motivated and detail-oriented team member to support the Quality Department in daily issue tracking, defect part handling, and lab test assistance. This role plays a key part in maintaining product quality and ensuring accurate data management across production processes. Corporate: • Adheres to the HTGSS policies and procedures, • Learns, demonstrates and upholds HTGSS Core Values, • Complies with all HTGSS Certification standards; Management System (TS16949), Environmental ISO 14001-2015 and Health and Safety ISO 45001-2018 policies and procedures, • Treats all HTGSS team members with respect and professional courtesy, • Always strives to maintain a positive work environment, • Manages the department budget efficiently as per approved annual budget, • Adhere to all safety policies and procedures, • Complies with all safety policies and 5S clean philosophy to maintain a safe, clean working environment, • Collect, organize, and report daily quality issue data across production lines, • Maintain and update quality tracking systems and dashboards, • Support root cause analysis (RCA) and corrective action processes for quality issues, • Assist in cross-functional meetings and improvement workshops (e.g., 5-Why, Fishbone, 8D), • Support the preparation of internal and customer-facing quality reports and presentations, • Assist in documenting process changes and quality improvements, • Participate in on-site inspections, audits, rework and data collection activities, • Collaborate with production and engineering teams to support real-time issue resolution, • Contribute to continuous improvement initiatives aligned with company quality standards, • 401(k), • Healthy Insurance, • Life Insurance, • Supplemental Insurance, • Dental Insurance, • Vision Insurance, • Paid time off

43638BR Requisition ID: 43638BR Business Unit: IND Job Description: * This position can be based in any of our CDM Smith offices * CDM Smith is seeking an Industrial Client Service Leader to help further accelerate our successfully growing business with electric utility clients across the US. This person will lead our growth in the utility sector by identifying promising new opportunities, winning exciting new projects and growing key client accounts. This individual will bring experience identifying and selling consulting, engineering, design-build and EPC (engineer, procure, construct) projects to electric utilities including T&D, substations, generation, civil works, geotechnical, and environmental projects.. This individual has helped utility clients successfully implement power grid upgrades, expansion, resilience, and sustaining capital projects and programs as well as general infrastructure and facility capital projects, comply with environmental requirements, or address other related needs. As an integral member of our dynamic Industrial team, the Client Service Leader contributes by: * Leading business development, client engagement, client service management, and strategic marketing for multiple major utility clients in the U.S. * Developing and maintaining high value relationships with utility clients * Growing market share by partnering with senior project managers and key technical specialists as they work for clients to deliver high quality projects * Collaborating with our award-winning technology group to stay at the forefront of leading-edge tools that improve project delivery for clients * Implementing short and long-term strategies that contribute to the growth and profitability of CDM Smith Job Title: Industrial Client Service Leader - Electric Utilities Group: IND Employment Type: Regular Minimum Qualifications: * Bachelor's degree. * 12 years of related experience. * Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. -Equivalent additional directly related experience will be considered in lieu of a degree. Preferred Qualifications: * EPC business development experience in industrial markets with demonstrated client relationship building in the investor-owned and publicly-owned power utility sectors. * Bachelor's or Master's degree in engineering preferred * Excellent interpersonal and communication skills. EEO Statement: We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. Why CDM Smith?: Check out this video and find out why our team loves to work here! () Join Us! CDM Smith - where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. Job Site Location: United States - Nationwide Agency Disclaimer: All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. Amount of Travel Required: 30% Assignment Category: Fulltime-Regular Visa Sponsorship Available: No - We will not support sponsorship, i.e. H-1B or TN Visas for this position Background Check and Drug Testing Information: CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. Pay Range Minimum: $120,973 Pay Range Maximum: $211,723 Additional Compensation: All bonuses at CDM Smith are discretionary and may or may not apply to this position. Work Location Options: Hybrid Work Options may be considered for successful candidate. Massachusetts Applicants: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

43415BR Requisition ID: 43415BR Business Unit: IND Job Description: * This position can be based in any of our CDM Smith offices - Hybrid Work Options may be considered for successful candidate. * CDM Smith is seeking an Industrial Client Service Leader to drive our national strategy for expanding in the rapidly growing data center market. This high-impact leadership role focuses on identifying new opportunities, winning work, building strong client relationships, and driving growth in this critical sector. The ideal candidate will have proven experience identifying and selling consulting, engineering, design-build and EPC (engineer, procure, construct) projects for data centers, including power delivery, water systems, and civil/site works. Expertise should span all project phases, from site identification and due diligence through planning, design and construction. This individual will have helped data center clients and related companies implement planning and capital projects, meet water management objectives, address power requirements, and address other related needs. As an integral member of our dynamic Industrial team, the Client Service Leader will contribute by: * Leading business development, client engagement, client service management, and strategic marketing for multiple major data center clients in the U.S. * Developing and maintaining high value relationships with data center clients. * Leading winning proposal efforts. * Expanding market share by partnering with senior project managers and key technical specialists to deliver high quality projects. * Collaborating with our award-winning technology group to leverage innovative tools that enhance project delivery. * Implementing short and long-term strategies that contribute to the growth and profitability of CDM Smith. #LI-TJ1 Job Title: Industrial Client Service Leader - Data Centers Group: IND Employment Type: Regular Minimum Qualifications: * Bachelor's degree. * 12 years of related experience. * Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. * Equivalent additional directly related experience will be considered in lieu of a degree. Preferred Qualifications: * EPC business development experience in industrial markets with a proven ability to build client relationships in the data center and related sectors. * Bachelor's or Master's degree in engineering, construction, or MBA, MS, or MA with applicable experience * Excellent interpersonal and communication skills. * Established relationships with decision-makers in the data center industry. -A proven track record of selling mission-critical and hyperscale data center projects. EEO Statement: We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. Why CDM Smith?: Check out this video and find out why our team loves to work here! () Join Us! CDM Smith - where amazing career journeys unfold. Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. Job Site Location: United States - Nationwide Agency Disclaimer: All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. Amount of Travel Required: 30% Assignment Category: Fulltime-Regular Visa Sponsorship Available: No - We will not support sponsorship, i.e. H-1B or TN Visas for this position Background Check and Drug Testing Information: CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. Pay Range Minimum: $119,829 Pay Range Maximum: $209,726 Additional Compensation: All bonuses at CDM Smith are discretionary and may or may not apply to this position. Work Location Options: Hybrid Work Options may be considered for successful candidate. Massachusetts Applicants: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

You will provide hands-on engineering support to diagnose and resolve complex performance anomalies-such as thermal, vibration, and vacuum issues-while leading a team of technicians and junior engineers toward consistent testing excellence. Provide daily guidance and technical leadership to technici

Job DescriptionOverview We are seeking a talented and innovative Design Engineer to join our dynamic team in Mesa, AZ. In this role, you will leverage your engineering expertise to lead, design and complex electrical systems that interface with military platforms including aircraft. If you're passionate about engineering and eager to work in a collaborative environment, we want to hear from you! Responsibilities • Design, develop, and test electrical systems consisting of CCAs, printed circuit boards and/or firmware., • Architect, design, develop, debug, deploy, and maintain electrical and electronic hardware for new and existing ICE products., • Determine and document hardware and data input/output and system requirements., • Design, develop, test, modify, install, and update embedded software and firmware., • Evaluate system and software designs, equipment, and techniques and make recommendations for design improvements., • Participate in design reviews and provide constructive feedback to peers., • Stay updated on industry trends and advancements to incorporate innovative solutions into designs., • Support the documentation process, including specifications, test plans, and reports., • Occasional travel may be required.Qualifications, • Bachelor's degree in Engineering strongly preferred., • 6+ years experience in electrical/computer engineering; or, • Associates degree and 9+ years electronic design experience may substitute Bachelor's degree., • Knowledge of digital communication hardware and protocols (UART, SPI, I2C, IrDA, USB, WiFi, RFID, TCP/IP, RS-485, MIL-STD-1553, etc.) required., • Extensive experience with Altium Designer required., • Strong background in CCA hardware and PWB development required., • Must be able to work independently and in multi-disciplinary teams and to organize and prioritize tasks and activities., • Encryption hardware experience a plus., • Ability to obtain Security Clearance is required.

Job Description Location: Position requires travel so the candidate can be located anywhere within the US. Why CCI? CCI Systems, Inc. is an Employee-Owned solution provider specializing in telecommunications, comprehensive network assessments, industry-leading engineering, drafting and design services, and 24/7 support services. Come join our team of engineers and experts that guide our customers toward the right choices to future-proof their network for years to come. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We value our employees’ hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking a Field Engineer to provide technical expertise pertaining to customer network upgrades, services, field management and project administration with a full understanding of HFC distribution systems. Responsibilities • Assess Outside Plant (OSP) and Inside Plant (ISP) hardware and infrastructure including but not limited to plant documentation, Hybrid Fiber Coax, (HFC) active and passives, reading and understanding OSP diagrams/drawings, taking and maintaining accurate field notes, operation of a bucket truck, accessing network enclosures and nodes and operation of testing gear., • Correct customer network failures and improve overall network performance using sweep gear and CATV test equipment., • Diagnose and repair plant related issues to reduce upstream noise and forward path impairments within the cable system with the use of standard OSP tools to include OTDR's, TDR’s, light meters, and signal strength meters., • Conduct targeted system sweeps, document findings, and deliver system information to create system reports., • Perform head end and meter set up., • Perform DOCSIS 3.1 testing and assessments., • Calculate system signal losses and make necessary adjustments to resolve issues., • Reduce and diagnose upstream noise within the cable system., • Install/align/optimize HFC equipment including fiber optic nodes and related equipment., • Install in-line devices on system backbone (node, amplifiers, line extenders, taps, splitters, and power supplies) as necessary for sweep and system upgrade projects., • Work with customers, subcontractors, and other team members in the field to define, collect, and determine information from customers and customer facilities for project requirements., • Implement and oversee a team of technically sound, customer-minded, and quality focused technicians and subcontractors tasked with delivery of best-in-the-world services to CCI Systems, Inc. customers., • Assign daily workload to in-house technical staffing and subcontract labor to enable TFS to fulfill contract obligations with customers., • Work with project managers to ensure daily field operations, staffing, quality control and deliverables are driving necessary profitability goals per project., • Approve weekly project documentation; this includes subcontractor production reporting, in-house employee production reporting, technical documentation, and other necessary documentation., • Meet with customers at local level to discuss any project related issues., • Understanding the project SOW and escalation process for deviations., • Report accurate daily project updates for productivity tracking and project billing., • Define, develop, and share technical knowledge and stay current on technical advancements., • Ensure the proper development and training of new employees to assigned project., • 5-7 years’ experience as a Coax Splicer., • 5-7 years’ experience in a HFC Sweep/Technician role within the Service Provider space., • Consulting background and experience working with multiple customers preferred., • Sweep certification preferred., • DOT Certification & Bucket Truck and Safety Certifications preferred., • Test equipment will include but not limited to the following: VIAVI SCU 1800 Sweep Generator, VIAVI OneExpert ONX-630, VIAVI DSP TDR, OTDR, VOM, and Light Meter., • Full understanding of Viavi/JDSU gear regarding sweep; includes head end and meter set up., • DOCSIS testing experience., • Full understanding of an HFC head end; combining, optics (forward and return), and basic understanding of CMTS, FTTX, and ISP., • In-Depth understanding of OSP (outside plant) and proficient in troubleshooting., • Test result evaluation and reporting., • Able to work independently on projects and take direction from teammates and develop skills to advance professionally., • Strong verbal and written communication skills., • Ability to take direction and work within timelines., • Demonstrates leadership skills to positively influence others, mentor, and collaborate with teammates, communicate on the level of others, listen, and understand people in circumstances common in the workplace. Additional information • Approximately 75% nationwide travel is required, typically 14 days on-site, travel days, and 5 days off at home., • Must have a valid driver’s license and a good driving record., • Must be able to pass a DOT Medical Examination to obtain and maintain a DOT Commercial Motor Vehicle Certification., • This is a remote position when not traveling. #LI-DNI

Job Description Under general direction of the Director of Engineering, the Electrical Design Engineer is responsible for new product electrical design (including but not limited to PCB layout, software development, schematic capture and hardware design), product improvements, documentation, production test fixture design, reliability analysis, test strategy development as well as providing technical expertise and product knowledge using a variety of engineering disciplines. The Electrical Design Engineer will also work collaboratively with other members of the Engineering team to ensure that projects are completed in a timely manner. Essential Duties and Responsibilities • Lead engineering projects covering the company's range of technology and product areas, • Design and develop complete devices that integrate mechanical, electrical/electronic components, • Interact with Product Management, Marketing and Customers to fully understand product requirements and develop cost effective and innovative solutions, • Create solid models and drawings for assembly, components, tooling and fixturing in SolidWorks, • Perform Finite Element Analysis on high stress components, • Work with internal and external vendors and consultants to create and test functional prototypes of new devices, component changes, and design improvements, • Create designs that are aligned with assembly and manufacturing capabilities; perform Design-for-Manufacturing reviews, • Perform product verification and validations according to the defined design inputs and product specifications, • Develop multi-level Bill-of-Materials, • Write reports, specifications, correspondence, and procedures, • Ensure products comply with and are certified to applicable specifications and regulatory standards, • Stay abreast of any new technologies, including design software, rules, design practices etc., • Develop test strategy and solutions when applicable, • Perform functional testing and troubleshooting of electronic products, • Perform schematic design, analysis, and Simulation of electronic circuits, • Provide guidance to internal and external sources for PCB layout, • Lead and train members of the Design Team, • Work closely with a wide variety of internal and external customers to define, meet or exceed design parameters during the design phase., • Interface with customers on test related issues when applicable, • BS in Engineering, preferred, • 3+ years of Design Engineering experience, preferred, • Proficient in software tools including Solid Works, 3D CAD modeling and Microsoft Office applications, • Experience with tools such as FMEA, FEA, DFM and statistical techniques, preferred, • Strong communication and interpersonal skills to effectively interact with staff at all levels in the organization, • Experience with High Voltage design requirements a plus, • Experience with commodities including: cable harnesses, CNC milling/lathe, PCBA, box-builds, and electronic components, preferred, • Problem solving, data analysis, deductive reasoning and critical thinking skills, preferred, • Ability to occasionally lift up to 50 pounds

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Our Construction Materials Team plays a critical role in ensuring the quality, safety, and performance of materials used in infrastructure and building projects. From concrete and asphalt to soil and aggregates, our team provides essential testing and analysis that support the structural integrity and compliance of construction efforts. The Construction Materials Testing Manager leads and develops a team of technicians and field staff, providing technical direction, mentorship, and oversight on a wide range of construction projects. This role ensures that project teams deliver high‑quality construction observation, testing, and documentation in alignment with Olsson's standards and client expectations. As a CMT Manager, you will be responsible for managing QA/QC processes for construction assignments, reviewing complex technical issues, and serving as a senior advisor on challenging or high‑profile projects. Drawing on advanced experience, this position independently evaluates field conditions, interprets test results, and makes informed recommendations to verify the quality, safety, and compliance of materials and constructed elements. This role plays a key part in ensuring successful project execution by coordinating staffing, maintaining operational efficiency, supporting project managers, and fostering strong relationships with clients, contractors, and internal teams. Primary Responsibilities: • Direct, mentor, and support staff on the technical aspects of construction materials testing projects, ensuring effective coordination with all disciplines involved., • Plan, implement, and oversee QA/QC processes for construction assignments, ensuring that project deliverables meet Olsson's standards for accuracy, completeness, and technical excellence., • Lead efforts to identify, organize, and deploy technical resources needed to support the group's workload and project requirements., • Serve as a trusted technical advisor to clients, offering consultative guidance and solutions for construction‑related challenges., • Continue to build and strengthen subject‑matter expertise in key construction materials and testing areas, contributing to the team's technical growth., • Provide senior‑level review of construction inspection and testing activities, acting as a resource for resolving complex technical issues across multiple projects., • Support preparation of project studies by conducting research, performing field and laboratory testing, gathering data, and contributing technical insight as needed., • Promote operational efficiency by identifying opportunities to streamline processes, improve workflows, and enhance the quality of project outcomes., • Supervise, mentor, and review the work of less experienced staff, fostering professional development and consistent performance., • Associate degree in a construction-related field preferred., • A minimum of 10 years of experience in a construction-related field., • Preferred certifications:, • OSHA 30, • American Concrete Institute (ACI) Grade I, • ATTI Asphalt and Soils, • National Institute for Certification in Engineering Technologies (NICET) I/II, • ICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, • Nuclear Gauge, • Excellent client service orientation, communication, and presentation skills., • Solid interpersonal and decision-making skills and the ability to generate innovative and effective solutions to complex problems., • Strong communication skills., • Ability to contribute and work well on a team., • The ability to work in a constant state of alertness and safe manner and communicate safety expectations to junior staff. #LI-DNP Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description:\n\nDescription: Since 1980, CobbFendley has been committed to providing innovative engineering and surveying solutions with the goal of bettering communities. Our multi-discipline approach allows for the efficient completion of projects through experienced staff who focus on client communication. We are always seeking talented and qualified professionals to enhance our ability to provide clients with exceptional service. Are you ready to Join Our Block and advance your career? At CobbFendley, people are our most valued resource. We offer a(n): New Hire Program // We understand changing jobs can be intimidating, CobbFendley has established a program geared specifically to the successful onboarding and integration of new hires into the firmDevelopment Opportunities // Professional and personal growth through innovative in-house training and collaborative resources Compensation + Benefits // Competitive compensation package with comprehensive benefits including 401(k) Matching and Profit-sharing Contributions; Employee Stock Ownership Plan (ESOP); Health, Vision, and Dental Insurance; Short-Term and Long-Term Disability Insurance; Employer Funded and Voluntary Life Insurance; Tuition Reimbursement; and Continuing Education Programs Paid Parental Leave // FMLA-eligible employees will receive fully paid leave in the amounts of eight (8) weeks for maternity cases and two (2) weeks for paternity or adoptions casesWinter Holiday // Extended office closure from December 25 through January 1 to relax and enjoy the holidays Community Engagement // CobbFendley Cares focuses on STEM Education, Hunger Relief, and Sustainable Solutions CobbFendley is seeking an experienced Senior Project Manager in our Tempe, Arizona office. Requirements: EDUCATION, REGISTRATION, CERTIFICATION The successful candidate’s most important qualifications include the following.Registration and designation as a Professional Engineer (PE), required. EXPERIENCE + KNOLWEDGE SKILLS ABILITY (KSA)Expert // Deep and comprehensive knowledge with a high level of expertise; recognized authority and capable of innovating and leading in the field. 20+ years of relevant and professional experience within a discipline, including proven performance as a Project Manager IV. Knowledge of project management methodologies and lifecycle, industry standards, city, state, and federal rules and regulations, tools and software (i.e., Microsoft suite, Vantagepoint, Smartsheet, etc.), and quality management required.Skills including leadership, communication, time, risk, quality and financial management, negotiation, and problem-solving required.Ability to think strategically, adapt to competing priorities, execute and delegate, communicate and collaborate, and perform tasks with a high level of accuracy required COMPLEXITY + DECISION-MAKING AUTHORITY Responsible for success of projects of large and may be complex scope of major importance within a discipline. Independently perform all assignments, is the key decision maker/subject matter expert and addresses staff questions/concerns in project design/constructability, and supervision received is essentially administrative. RESPONSIBILITIESFinancial Management // Utilize weekly budget report, project reports, accounts receivable (A/R) report, and staff utilization to manage projects and resources. Escalate to Regional Manager for additional staffing needs. Prepare scope of work (SOW), Levels of Effort (LOE) and schedules for projects. Identify out of scope requests and prepare proposals for additional authorizations.Responsible for collection of invoices from clients and other Project Manager’s clients under their direction. Communicates with Regional Manager for delayed payment risk plans.Corporate Compliance + Risk Assessment //Ensure completion of the contract and subcontract review process through the Contracts Department and appropriate filing and adhere to jurisdictional requirements and company-established signature matrix protocol. With support and direction from Contracts Department, review and provide contract mark ups, negotiate client contract modifications, and keep informed of the 5 typical contract review modifications: indemnification (duty to defend), standard of care, insurance requirements, warranty, and payment terms.Negotiate payment terms with the client. Ensure the company-established QA/QC process is followed from proposals to final deliverables.Capable of identifying preclusions on pursuits and teaming opportunities. Communication + Collaboration //Foster an environment for strong communication and collaboration such as ensuring that messages and information are not only received but understood and acted upon appropriately within the department, other disciplines and regions, and corporate resources including engagement of staff. Able to articulate project requirements timelines, deliverables, corporate directives, in a concise and clear manner.Ensure project and company communication is provided and documented to clients and staff. Manage multiple and/or major marketing pursuits including resumes, writing project approach, responsible for teaming efforts, QA/QC and review of requests for qualifications (RFQ), proposals, leading interviews, etc. Client + Internal Satisfaction // Be responsive and accessible, anticipate needs and proactively offer solutions, address complex problems and concerns timely, and follow up to ensure satisfaction post-resolution.Oversee multiple clients and ensure a positive and professional rapport.People Development //Ensures adequate staffing and recruiting of project team members.Delegates work to, trains, mentors, and supervises junior-level staff and other entry to senior level project managers to complete assignments.Provide timely feedback directly to staff including for annual evaluation.Exhibit exceptional leadership skills, including the ability to clearly define goals and responsibilities that are clear and realistic.Business Development //Develop and maintain strong relationships with new and existing clients to identify business opportunities and expand company presence in the State of Arizona and within other states in CobbFendley’s Mountain region.Identify and pursue potential leads, assisting in the preparation of proposals and presentations to secure new projects. Collaborate with marketing and leadership teams to develop strategic plans for growth in Municipal and other infrastructure sectors in the state of Arizona.As needed, represent the company at industry events, conferences, and other networking opportunities and stay updated with market trends and competitor activities.Lead efforts in identifying and developing teaming partnerships with other firms.Drive revenue growth through proactive engagement, client retention, and strategic business initiatives.Technical //Work on projects that include the following scopes: Drainage Area MapsClosed Storm System HydraulicsRoadway design, AlignmentsSanitary Sewer Design, Force MainsWaterline DesignWater & Wastewater Design of PlantProject Manual Construction Contract & SpecsPermits & RegulatoryTechnical Report WritingSelecting PumpsLift Station DesignDevelopmental Plan ReviewConstruction Admin, Limited InspectionConstructability ReviewCoordinating Multiple Discipline DesignConstruction PhasingADA RegulationProgram ManagerCity of Engineering ServicesCapital Improvement PlansImpact FeeUtilize the following software applications to complete project work:Microsoft ProjectBluebeam COBBFENDLEY CHARACTERISTICSWe Collaborate // with a professional attitude making communication a priority.We Commit // to maintaining a safe and inclusive work environment, with a focus on accountability. We Build Communities // by fulfilling our responsibilities with integrity that is consistent with industry standards. PHYSICAL/COGNITIVE REQUIREMENTS + ENVIRONMENTAL FACTORS Most work is performed in a professional office environment. Some trips to client offices and outdoor environments for observations will be required.Seated and Standing Position. Extended periods of sitting and standing in an upright position at a workstation.Mobility. Movement within the office and job sites, including navigating between floors, workstations, and outdoor environments with potential for uneven surfaces.Neck Movement. Forward flexion, extension, or lateral rotation of the head and neck while using multiple computer screens.Repetitive Motion. Repetitive finger movements for operating a computer mouse and typing on a keyboard.Arm Movement. Extending hands and arms in various directions, such as overhead, below the waist, forward, or laterally.Object Handling. Raising or lowering objects from one level to another and transporting objects by holding them in the hands, arms, or over the shoulder.Cognitive Requirements. Selective attention, oral comprehension, oral expression, speech recognition, speech clarity, written comprehension, written expression, problem sensitivity, deductive reasoning, inductive reasoning, number facility, information ordering, category flexibility, flexibility of closure, fluency of ideas, and originality.Office Conditions. Includes extensive use of electronic devices such as computers, printers, copiers, scanners, plotters, and telephones. Additionally, tasks may involve the use of cutting tools and equipment like rotary paper cutters and plotting devices.Outdoor Conditions. Includes walking and climbing on uneven surfaces, confined spaces, and exposure to extreme weather conditions (heat and freezing temperatures). Potential exposure to high noise levels and various allergens, including poison ivy, sumac, dust, pollen, and cedar. Potential exposure to wildlife hazards such as animals, insects, and plants.Safety and Equipment Use. Regular use of personal protective equipment (PPE) is required, along with use of hand and power tools.Driving and Vehicle Use. May involve driving large pick-up trucks with attached trailers, potentially operating watercraft, and for extended periods of time. EXPECTED WORK HOURSThis is a full-time position, generally 40 hours per week, however, hours may fluctuate depending on department needs including the use of overtime. CobbFendley’s standard operating hours are Monday through Friday, 7:30 AM to 4:30 PM CST. Generally, employees receive a 1-hour unpaid lunch break free of duty. Please note, operating hours and lunch hours may differ based on project workload, primarily for field staff. WORK LOCATION FLEXIBILTY This position is eligible for a hybrid schedule once the training period is complete as established by the department. EQUAL EMPLOYMENT OPPORTUNITY Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws.EEO is the Law (English)EEO is the Law (Spanish)EEO is the Law - Poster Supplement MISCELLANEOUS Pre-Employment Screenings. All offers of employment at CobbFendley are contingent upon the prospective employee passing a drug screening, physical exam (if applicable), and various background verifications (including but not limited to 10-year history of the county, state, federal, and a 5-year history of motor vehicle records). CobbFendley complies with all applicable state and federal laws regarding said screenings. Unless and only to the extent state or federal law limits CobbFendley’s drug-testing requirements for initial hiring, all candidates for employment are subject to pre-employment drug screening verification which may include a panel drug test for use of marijuana and other substances that may be lawful under state law but unlawful under federal law. A positive result may lead to disqualification of candidacy or termination from employment to the extent permitted by law. CobbFendley reserves all rights with respect to its drug-testing, other pre-employment screenings, and workplace policies and procedures. External Recruiting Agencies. CobbFendley does not and will not accept unsolicited resumes under any circumstances from independent recruiters, recruiting agencies, or similar entities. Recruiting activity on behalf of a candidate does NOT constitute CobbFendley's acceptance of terms and conditions without prior contractual agreements signed by authorized CobbFendley personnel. Unsolicited resumes through any channels including cold calling, emails, applications, social media messaging, etc., will not be reviewed.Work Authorization + Sponsorship. Cobb, Fendley & Associates, Inc. participates in E-Verify. E-Verify is an Internet-based system operated by the Department of Homeland Security (DHS) in partnership with the Social Security Administration (SSA). The E-Verify system uses federal databases to rapidly validate individual identities and work eligibility from the information gathered in the Form I-9. CobbFendley will not sponsor applications of work visas. We understand that this could affect your decision to apply with these conditions in mind.Applicant Accommodations. Consistent with the Americans with Disabilities Act (ADA) it is the policy of CobbFendley to provide reasonable accommodation when requested by a qualified applicant or candidate with a disability, unless such accommodation would cause an undue hardship for the Company. The policy regarding requests for reasonable accommodation applies to all aspects of the hiring process. If reasonable accommodation is needed, please contact the HR Department at 713.462.3242 or . Drug-Free Workplace Conditions Medication Disclosure: Employees and job applicants shall receive notice of the most common medications, either by brand name, common name, or chemical name, that may alter or affect a drug test. A list of such medications shall be developed by the Agency for Health Care Administration. Contesting Positive Results: An employee or job applicant who receives a positive confirmed drug test result may contest or explain the result to the employer within 14 days after written notification of the positive test result. Responsibility to Notify the Laboratory: The employee or job applicant has the responsibility to notify the testing laboratory of any administrative or civil actions brought pursuant to this section. List of Drugs for Testing: A list of all drugs for which the employer will test can be supplied upon request, described by brand names or common names, as applicable, as well as by chemical names. Right to Consult the Testing Laboratory: Employees and job applicants are notified of their right to consult the testing laboratory for technical information regarding prescription and nonprescription medication.

If you are an experienced Test Engineer, then get excited about an excellent opportunity to join Iridium's Solutions Validation team as a Test Engineer III! In this role you will perform research, development, testing, and sustaining engineering activities of Iridium services. As a Test Engineer III

We are looking for a Senior Test Engineer to support the design, development, and execution of electrical test systems for advanced aerospace and spaceflight hardware. Prepare and maintain test documentation, procedures, and plans for customer delivery. Mentor junior engineers and support debugging

Key Responsibilities Design and develop Electrical Ground Support Equipment (EGSE) including hardware, software, and documentation Select and integrate COTS test instruments , custom test enclosures, and cabling Ensure test hardware validates all contractual and design requirements of the Unit Under

Engineer and optimize Tanium sensors, packages, actions, and saved questions for endpoint visibility and remediation. IT Automation, Orchestration, Infrastructure Engineering, or Platform Operations.

Minimum of 4-6 years of inspection or engineering experience in a manufacturing environment. Overview We are seeking a skilled professional with a strong background in quality engineering, particularly within the aerospace sector. Utilize inspection practices and mechanical instruments, including CM

Bachelor's degree in Electrical Engineering, Mechatronics, Industrial Engineering, or related field (or equivalent experience). The Manufacturing Plant Engineer is responsible for maintaining, improving, and optimizing plant equipment and processes with a strong focus on electrical systems, automati

Develop both engineering and production test systems, test interface adapters, cabling, technical drawing creation, schematic creation, circuit design and analysis. We are hands-on, designing with the latest technology and tools, and integrate state of the art test solutions with the most advanced e