Trabajos workday en Tacoma, WashingtonCrear alertas

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington. As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes. You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation. Position Responsibilities * Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes * Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities. * Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances. * Determine and/or develop methods where procedures may not be available. * Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes. * Operate, use and maintain overhead maintenance work platforms * Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires. * Inspect and maintain building runway rails and expansion joints. * Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks. * Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations. * Maintain logs, charts, and perform written and verbal tie-in records. * Prepare reports and schedules as required. * Work with and assist employees of other classifications as required. * Perform work in other classifications when incidental but necessary to the accomplishment of the assignment. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications * 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances * 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks. * This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations. * Able to lift up to 35 pounds. Preferred Qualifications: * Experience inspecting and maintaining building runway rails and expansion joints. * Preference given to those with 2 years overhead crane experience. Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: 33.32 – 61.01 Applications for this position will be accepted until May. 29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Fabrication to join our Quality team in Puget Sound, Washington. Join our dedicated team as an Inspector Fabrication, where your keen eye for detail will be essential in ensuring the integrity of our fabricated parts and assemblies. In this critical role, you will perform thorough inspections of materials and components. Collaborating closely with Engineering, Quality, and Manufacturing, you will play a key role in evaluating and improving build processes while investigating and resolving defect-related issues. Your expertise in using precision measuring instruments will enable you to assess dimensions and workmanship accurately, while your ability to document nonconforming items will help maintain high standards of production. With a focus on continuous improvement, you will conduct audits and in-process inspections, ensuring compliance with all specifications. If you are passionate about maintaining excellence in fabrication and thrive in a fast-paced environment, we invite you to contribute to our mission of delivering top-quality products. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: * Perform inspections of fabricated detail parts, materials, and assemblies for workmanship, alignment, fit, and conformance to blueprints and specifications. * Inspect fabricated and machined parts, subassemblies, and tooling to ensure compliance with engineering specifications and quality standards. * Collaborate with Engineering, Quality, and Manufacturing to evaluate and improve build processes and defect reduction methods. * Investigate and resolve defect-related problems, initiating and implementing project plans for quality improvement. * Document any nonconforming materials, hardware, tools, or assemblies according to established specifications and procedures. * Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance with specifications. * Verify part numbers, serial numbers, and quantities against required paperwork upon receipt of parts and assemblies. * Ensure all paperwork, including drawings and specifications, is complete, accurate, and up-to-date. * Select and set up appropriate measuring instruments to check dimensions and workmanship of parts and assemblies. * Inspect dimensions and workmanship, including visual weld inspections, according to drawings and specifications. * Identify, document, and reject nonconforming parts/assemblies, noting discrepancies and required corrections. * Perform re-inspections and initiate Re-inspection Requests (R/R) as needed, communicating with relevant inspection groups. * Conduct in-process inspections, audits, and monitor heat treat processes, documenting required information. * Verify certifications of tools, equipment, and personnel to ensure they are current and compliant. * Handle and dispose of hazardous materials in accordance with safety regulations and contact supervisors for assistance when needed. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Basic Qualifications: * 3+ years of experience as a Quality Inspector. * 3+ years of experience reading and understanding engineering drawings, blueprints, and specifications. * 3+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications. * 1+ years of experience inspecting aircraft/aerospace parts, components, and/or assemblies for conformance with applicable drawings, specifications, quality standards, and manufacturing plans. * Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel. * Proficiency in reading, writing, and speaking English. Preferred Qualifications: * 1+ years of experience in metal or composite fabrication in aerospace. * Experience in Foreign Object Debris (FOD) risk. * Associate degree or higher. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jun. 26, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Flexible Machining System (FMS) Operator to join our Fabrication team in Auburn & Puyallup WA. As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities * Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts. * Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary. * Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions. * Select and verify the condition of machine accessories and holding devices (e.g., chucks, vises, templates) and identify any required fixtures or shop aids. * Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents. * Use overhead cranes to load and unload parts and fixtures as required for the machining process. * Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases. * Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation. * Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools. * Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators. * Adjust machine settings (e.g., speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles. * Troubleshoot and repair minor controller problems as required, and initiate requests for corrective action when machine malfunctions occur. * Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met. * Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required. * Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups. Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. * Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. * Work in environments that may involve contact with metals, solvents, and coolants. * Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. * Adapt to varying noise levels and atmospheric conditions. * Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications * 2+ years of experience setting up and operating Manual and CNC machines * 2+ years of experience in setting and using precision measuring tools and equipment such as micrometers, calipers, and/or dial indicators * 2+ years of experience using software applications for internet navigation, email, Microsoft Suite and/or other specialized computer applications * 2+ years of experience working with powered hand tools * Experience with reading and interpreting drawings, specifications, material processes, schematic and diagrams * Must be able to lift, push and pull up to 35 pounds frequently within an 8-hour shift Preferred Qualifications: * Experience in Fabrication of airplane parts * Experience in Fabrication of temporary tooling Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $33.32/hour, with the potential to earn up to $61.01 /hour in accordance with the terms of the relevant collective bargaining agreement Applications for this position will be accepted until Apr. 24, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Contingent Upon Program Reward The position is contingent upon program award Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Industrial Maintenance Electricians, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington. As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment. You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation. Position Responsibilities: * Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models) * Determine if system should be shut down or work must be performed with power source on * Lock out, tag out, try out equipment and related systems * Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers * Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay * Troubleshoot electric motors using appropriate test equipment * Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system * Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel * Service and maintain electrical systems on various types of overhead cranes * Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models) * Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs * Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance * Install, replace and repair fiber optic cable for computers and computing systems * Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets * Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit) * Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas * Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems * Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters) Physical Demands and Potential Hazards: * Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications * 3+ years of experience as an Electrician or Apprentice. * 1+ years of experience maintaining industrial equipment. * Experience working from heights and using fall protection equipment with weight limitations . * Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift. * Must be able to complete fall protection training. Preferred Qualifications: * Electrician license (EL01 &/or EL 07) or an electrical card. * Crane related experience. * Experience with prime power. Typical Education & Experience: High school graduate or GED preferred. Relocation: * Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $33.32 per hour – $61.01 per hour Applications for this position will be accepted until May. 29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company has an opportunity for a 2nd Shift Factory Service Attendant (Custodian) to maintain clean, hygienic conditions as custodial professionals at the following locations: Auburn, WA; Kent, WA; Puyallup, WA; Renton, WA; Seattle, WA, and Tukwila, WA. Looking for an exciting and rewarding career with The Boeing Company? Joining a fun and diverse culture with Factory Services is a great way to enter Boeing, for a career rich with other opportunities. In just one year, you could be able to internally transfer to multiple new fields. Many new hires into Factory Services find their way into new career fields after just one year. Besides great medical coverage, and support for schooling, retirement, this position will allow you an opportunity to gain further training to help you achieve one of the many career-level positions in the greatest aerospace company in the world. As a Factory Service Attendant, you will be responsible to help clean and maintain our facilities in a safe and healthful condition. Join us, and you can build something better for yourself, for our customers, and for the world. Position Responsibilities: * Work in all company facilities and work environments such as offices, factories, cafeterias, fitness centers, restrooms, and transportation tunnels * Handle and dispose of hazardous materials using approved methods, as required; blood-borne pathogen clean up as required (training will be provided) * Work with chemicals used to perform tasks; maintain supplies required for cleaning assigned location and be knowledgeable in the proper use and storage of cleaning agents * Perform routine custodial tasks such as sweeping, vacuuming, carpet shampooing, detailing offices, conference rooms, stairways, restrooms, empty trash * Wear backpack style vacuum; vacuum or sweep all traffic areas, offices, aisles, transportation tunnels, stairs, and stairwells; reposition furniture as needed * Thoroughly clean restrooms; disinfect and clean all floor surfaces; operate and move standard approved machinery for cleaning, to include implements for hard floor care and carpet extraction * Follow specific detailed instructions, processes, and procedures, both written and verbal * Work independently with little direct supervision; work with and assist others when needed * Reach overhead up to six hours per day; walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; bend and twist frequently up to six hours per day; squat and kneel; constantly grasping/handling; forceful grasping/gripping; use computer; move arms, hands, shoulders repetitively throughout the workday; use and operate low impact vibratory tools (buffer) constantly throughout the work day This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): * Able to Lift/carry up to 35 pounds; push/pull using up to 45 pounds of force; reach overhead up to six hours per day * Valid Driver’s License * High school graduate or GED Preferred Qualifications (Desired Skills/Experience): * 1+ years of janitorial/custodial experience * 1+ years of experience working with hazardous materials * 1+ years of experience following written and verbal work instructions Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Work Shift: This position is for 2nd shift. Union: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $20.32 – $27.11 per hour Applications for this position will be accepted until May. 29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: • Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications., • Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems., • Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions., • Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages., • Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy., • Comply with all Federal, State, and Company regulations while performing duties., • Collaborate with other crafts to assist in troubleshooting outside the central control system as needed., • Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency., • Communicate relevant information to succeeding shifts using management-approved methods., • Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems., • Maintain equipment records, logs, and updates, preparing reports and schedules as required., • Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion., • Ensure system configurations comply with FAA and accreditation requirements., • Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal)., • Understand electronic theory, computer and networking architecture, microprocessors, and discrete components., • Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems., • Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design., • Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes., • Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required., • Perform tasks associated with other job classifications when necessary to complete assignments., • Obtain and maintain applicable licenses, certificates, and certifications., • Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems., • Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: • Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs., • Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting., • Work in environments that may involve contact with metals, solvents, and coolants., • Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards., • Adapt to varying noise levels and atmospheric conditions., • Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: • 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance., • 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms., • Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: • Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment., • Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams., • Experience working around 3 phase, industrial voltages 480v, 277v, 208v., • Ability to work around electromagnetic fields as a result of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: • This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: • This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Mechatronics Maintenance Technician to join our Equipment Services team in various locations across Washington State. As a Mechatronics Maintenance Technician, you will be at the forefront of cutting-edge technology, ensuring that our advanced manufacturing equipment operates at peak performance. Your expertise will be essential in performing preventative maintenance, troubleshooting complex systems, and implementing innovative solutions to enhance operational efficiency. You will work with a wide range of machinery, from automated tooling systems to multi-axis robotic equipment, all while collaborating with a skilled team dedicated to excellence. Your role will not only involve hands-on technical work but also the opportunity to contribute to continuous improvement initiatives that drive our success in the aviation industry. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: • Perform routine preventative maintenance on production equipment, tooling, and building systems according to specifications and standardized processes., • Repair and replace less complex mechanical and electrical components, such as sensors, relays, and motors, while assisting higher classified employees with more complex systems., • Conduct operational checks of machines to ensure proper functionality and performance., • Utilize shop tools, including powered and non-powered hand tools, as well as test equipment like multimeters and calipers, for maintenance tasks., • Prepare and maintain mechanical maintenance reports, logs, and charts, summarizing information for stakeholders., • Inspect equipment as requested to identify necessary repairs and prevent breakdowns or major overhauls., • Participate in continuous improvement initiatives, providing recommendations for equipment design and performance enhancements., • Gather samples and data for predictive maintenance analysis and collaborate with team members for effective troubleshooting., • Follow Hazardous Energy Control Process (HECP) protocols, including lockout/tagout procedures, to ensure safety during maintenance activities., • Operate power industrial trucks, floor-operated cranes, and mobile elevating work platforms to move heavy components and equipment safely., • Recommend updates to equipment manuals and documentation to reflect current practices and improvements., • Work in compliance with environmental, health, and safety regulations to maintain a safe working environment., • Coordinate with management, engineering, and equipment vendors to analyze design requirements and order necessary parts and services., • Verify accurate setups of downstream equipment, including conveyors and robotic tooling, to ensure seamless operations., • Respond to emergency situations and equipment failures, taking appropriate action to mitigate risks., • Participate in training sessions to maintain certifications related to safety and equipment operation., • Communicate effectively with team members and other departments regarding maintenance activities and equipment status., • Monitor and manage the inventory of parts and supplies needed for maintenance tasks., • Adapt to new technologies and equipment as they are introduced to the facility. Physical Demands and Potential Hazards: • Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs., • Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting., • Work in environments that may involve contact with metals, solvents, and coolants., • Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards., • Adapt to varying noise levels and atmospheric conditions., • Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: • 1+ years of experience working in the field of Mechatronics or an equivalent combination of education and work experience., • Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: • Currently possess an Associate's degree or higher in Mechatronics, Industrial Robotics, Electronics or equivalent from an accredited institution of higher learning., • Ability to work around electromagnetic fields because of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: • This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: * This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $32.10/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jul. 03, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Machine Repair Mechanic to join our Equipment Services team in various locations across Washington State. As a Machine Repair Mechanic, your expertise will be essential in maintaining and repairing a variety of machine tools and equipment, where precision and attention to detail are paramount. You will be responsible for conducting thorough inspections and implementing preventative maintenance practices to ensure optimal functionality and reliability of all equipment. Your commitment to safety will be reflected in your adherence to SHEA regulations and best practices while guiding and mentoring team members. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: • Install, disassemble, repair, assemble, test, and maintain machine tools, process buildings, and overhead handling equipment, including stationary generator sets at the Kent and Bellevue Data Centers., • Conduct preventative maintenance inspections on stationary generator sets and other equipment., • Ensure compliance with SHEA regulations while performing all tasks., • Guide and mentor lower-classification employees in maintenance, repair, troubleshooting, modification, adjustment, and testing of machines and equipment., • Utilize schematics, blueprints, specifications, manuals, and applicable procedures to complete work assignments effectively., • Develop assembly methods when procedures are not available, documenting these methods for future reference., • Hand scrape, flake, lap, level, and align equipment components as needed., • Use precision devices for failure analysis and apply preventive/predictive technologies to machine and equipment systems., • Perform operational tests on machine tools and building equipment to ensure functionality., • Maintain logs, charts, and records, preparing reports and schedules as required., • Conduct preventive and predictive maintenance inspections to ensure equipment reliability., • Collaborate with other crafts to accomplish tasks and assist as needed., • Perform incidental rigging to facilitate work tasks., • Carry out work in other classifications when necessary to complete assignments. Physical Demands and Potential Hazards: • Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs., • Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting., • Work in environments that may involve contact with metals, solvents, and coolants., • Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards., • Adapt to varying noise levels and atmospheric conditions., • Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: • 3+ years' experience as a CNC machine repair mechanic, manufacturing building systems mechanic, or general equipment repair mechanic, (IE Pump repairs, ship repairs, large farming equipment or military equipment)., • Willing to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: • Experience testing and diagnosing hydraulic, pneumatic, electromechanical components, and test equipment., • Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams., • Ability to work around electromagnetic fields because of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: • This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: • This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $46.00/hour, with potential to earn up to $61.01/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Jul. 03, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-HC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview As a certified Safelite Repair Specialist I, you will utilize our industry-leading technology to complete vehicle glass repairs. You will champion the Safelite Spirit with your can-do attitude, caring heart, and service mindset while striving to bring unexpected happiness to your customers by completing jobs with only the highest quality standard in mind. What you will do • Learn to repair vehicle glass (in the classroom and hands on) with a focus on the Safelite Way of Fitting under the guidance of experienced technicians and Safelite leaders., • Repair chips, cracks and other auto glass related issues on customer vehicles., • Manage work orders, customer documentation and customer communication through the Safelite handheld Mobile Resource Management (MRM) technology. Promote and sell Safelite promotional items to customers., • Clean customer vehicle during wait/idle time during the repair process as well as perform additional housekeeping tasks in company vehicle and shop., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What You’ll Get • Competitive weekly base pay starting at $22.75/hour., • A benefits package valued at more than $10k*. This includes a 401(k) plan with company matching, medical coverage plans customized to suit your needs and a commitment to work/life balance through our paid time off (PTO) programs, company holidays and paid volunteer days., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license and any other licenses (as required by federal, state and local laws) to operate a company vehicle. Required, • On-the-job training/completion of Safelite SafeTech™ certification. Required Experience Qualifications • Must be 18 years of age or older. Skills and Abilities • Lifting and carrying up to 25 lbs. for short periods, assist an associate with lifting windshields weighing 26 lbs. to 50 lbs., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via camera / video surveillance, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company uniform and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures) This position involves driving duties that will be monitored through the use of cameras, GPS, and other tracking technologies to ensure safety and compliance. #LI-HC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Non-CDL Shuttle Driver We are currently on the lookout for an experienced Bus Driver to join our elite team inLakewood, WA. As a key member, you will be entrusted with ensuring safe and comfortable transportation for our passengers, while upholding the highest standards of professionalism and customer service. Transdev is proud to offer: CBA Position: Full-Time Position Subject to Collective Bargaining Agreement: • $22.05 - $27.00 (Union Collective Bargaining Agreement Payscale), • Starting pay $22.05 with progression to $27.00 over 5 years., • Vacation: up to 80 hours per year after one (1) year of service., • Nine (9) paid holidays after completion of six (6) month probation, • Paid Sick Leave: One (1) hr earned for each forty (40) hours worked after available after ninety (90) days of employment Key Responsibilities: • Safety-Focused Operations: Execute flawless operations by meticulously following designated routes and schedules, while adhering to stringent safety protocols and traffic regulations., • Passenger Care: Exhibit exceptional care and assistance towards passengers, ensuring smooth boarding, comfortable rides, and timely disembarkation for all., • Vehicle Vigilance: Champion vehicle safety through comprehensive pre-trip and post-trip inspections,, • promptly reporting any maintenance issues and maintaining the highest standards of cleanliness and safety equipment readiness., • Adherence to Protocols: Uphold company policies and procedures rigorously, encompassing seat belt enforcement, emergency response preparedness, and compliance with regulatory mandates., • 21 years or older, • Minimum 3 years of driving experience (personal or professional), • Excellent communication & customer service skills., • Must be able to work shifts or flexible work schedules as needed. The essential functions of this position require the ability to: • Work outside in varying temperature, weather, and humidity conditions-100% of the job is performed outside, work alone and in remote locations., • Sit for extended periods (up to 6–8 hours per day); frequently walk for long distances and on possible sloped ground or slippery and uneven surfaces, • Push and pull objects up to 50 pounds, occasionally throughout the workday; lift material weighing up to 50 lbs. with or without assistance; occasionally bend, kneel, or crouch to files or equipment stored at ground level Drug-free workplace: Transdev maintains a drug-free workplace. Applicants must: • Be eligible to work in the United States without requiring sponsorship now or in the future (if based in the U.S.). The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants: PleaseClick Herefor CA Employee Privacy Policy. Job Category: Driver/Operator - Bus, Paratransit, Taxi, Limo, Shuttle Job Type: Full Time Req ID: 5851 Pay Group: DVF Cost Center: 55884 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev – the mobility company – empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at or watch an overview video.

Job Title: Warehouse Associate Starting Pay: $23/hr plus OT available Location: Tacoma, WA Schedule- M-F 7am-3:30pm Job Description The Warehouse Associate consolidates, treats, stores, packs, transports and/or disposes of hazardous waste in accordance with environmentally responsible and compliant practices, policies, and procedures. Maintain detailed and accurate records. Primary Responsibilities: • Segregate and package material for transport., • Assist in maintaining inventory and storage of hazardous materials in accordance with applicable regulations, policies, practices and procedures., • Operate fork trucks and other mobile equipment to move containers to and from storage and treatment areas and to load/unload trailers., • Complete required documentation accurately, timely and legibly in accordance with applicable regulations and customer policies, practices and procedures., • Perform other reasonably related tasks as assigned by management. Basic Required Qualifications: • Ability to repeatedly lift and carry 50 pounds throughout the workday, • Ability to stand and walk over uneven surfaces for extended periods, • Visual acuity to read labels and documentation; depth perception to safely drive forklifts, • Ability to hear vehicle warning chimes and alarms, • Ability to work outdoors in all climate conditions and indoors in non-climate-controlled conditions, • Willingness and ability to wear company-issued personal protection equipment including safety glasses, hard had, steel toed shoes, gloves, Tyvek coveralls, and respirator. Preferred Qualifications: • High school diploma or GED, • Experience in warehouse or manufacturing environment, • Basic computer skills to complete web-based training, • Ability to understand and respond to written and verbal English, • Ability to predictably and regularly attend work during scheduled hours. Must be willing and able to occasionally work nights, weekends and variable schedule(s) as necessary., • Ability to deal politely and professionally with customers and coworkers.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $23.50/hour, increasing to $27.75/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-HC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Does this position interest you? You should apply – even if you don’t match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourage you to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including:, • Observing and assisting in installing and repairing auto glass, • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing, • Providing additional services & products, • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques., • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday., • Performs other duties as assigned, • Complies with all policies and standards What you’ll get: • Competitive weekly pay starting at $25.50/hour, increasing to $30.25/hour after training and certification., • Earn $5/set of wiper blades when added for customer safety., • Technician career levels determined based on performance metrics demonstrating efficiency, quality, and customer satisfaction., • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days., • Program to buy additional PTO or sell unused time up to 16 hours., • Up to $5,250 annually in tuition reimbursement., • Paid training and all the tools and resources you'll need to be successful. Education Qualifications • High School Diploma GED/Equivalent Preferred, • Valid state-issued driver’s license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds., • Ability to stand for extended periods, work in tight spaces, bend and twist body, • Ability to use a variety of hand tools and power tools safely and effectively, • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology, • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations, • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods, • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”, • Ability to work scheduled days, with flexibility on start and end times to accommodate customer’s needs, • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues, • Problem-solving and ability to trouble-shoot issues, independently and collaboratively, • Ability to read, write and interpret the English language and technical directions, • Ability to communicate orally (via phone) and written (via computer or other electronic means), • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies, • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-HC1 This job description in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we’re proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job’s essential duties because of an ADA disability.

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. The Boeing Company has an opportunity for a 2nd Shift Factory Service Attendant (Custodian) to maintain clean, hygienic conditions as custodial professionals at the following locations: Auburn, WA; Kent, WA; Puyallup, WA; Renton, WA; Seattle, WA, and Tukwila, WA. Looking for an exciting and rewarding career with The Boeing Company? Joining a fun and diverse culture with Factory Services is a great way to enter Boeing, for a career rich with other opportunities. In just one year, you could be able to internally transfer to multiple new fields. Many new hires into Factory Services find their way into new career fields after just one year. Besides great medical coverage, and support for schooling, retirement, this position will allow you an opportunity to gain further training to help you achieve one of the many career-level positions in the greatest aerospace company in the world. As a Factory Service Attendant, you will be responsible to help clean and maintain our facilities in a safe and healthful condition. Join us, and you can build something better for yourself, for our customers, and for the world. Position Responsibilities: - Work in all company facilities and work environments such as offices, factories, cafeterias, fitness centers, restrooms, and transportation tunnels - Handle and dispose of hazardous materials using approved methods, as required; blood-borne pathogen clean up as required (training will be provided) - Work with chemicals used to perform tasks; maintain supplies required for cleaning assigned location and be knowledgeable in the proper use and storage of cleaning agents - Perform routine custodial tasks such as sweeping, vacuuming, carpet shampooing, detailing offices, conference rooms, stairways, restrooms, empty trash - Wear backpack style vacuum; vacuum or sweep all traffic areas, offices, aisles, transportation tunnels, stairs, and stairwells; reposition furniture as needed - Thoroughly clean restrooms; disinfect and clean all floor surfaces; operate and move standard approved machinery for cleaning, to include implements for hard floor care and carpet extraction - Follow specific detailed instructions, processes, and procedures, both written and verbal - Work independently with little direct supervision; work with and assist others when needed - Reach overhead up to six hours per day; walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; bend and twist frequently up to six hours per day; squat and kneel; constantly grasping/handling; forceful grasping/gripping; use computer; move arms, hands, shoulders repetitively throughout the workday; use and operate low impact vibratory tools (buffer) constantly throughout the work day This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Basic Qualifications (Required Skills/Experience): - Able to Lift/carry up to 35 pounds; push/pull using up to 45 pounds of force; reach overhead up to six hours per day - Valid Driver’s License - High school graduate or GED Preferred Qualifications (Desired Skills/Experience): - 1+ years of janitorial/custodial experience - 1+ years of experience working with hazardous materials - 1+ years of experience following written and verbal work instructions Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Work Shift: This position is for 2nd shift. Union: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $20.32 – $27.11 per hour Applications for this position will be accepted until May. 29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 2nd shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description Are you ready to embark on an exciting career journey as a Full-Time Traveling Ortho Dental Assistant? This isn't just any job; it’s a chance to explore new horizons while making smiles brighter. Imagine working onsite at Sunrise Dental of Puyallup, where you'll bring your expertise to different locations, interacting with diverse patients and dental teams. With a pay range of $22-$26 per hour, you can enjoy the thrill of travel while being rewarded for your skills. Join a relaxed, high-performance culture that values humility and smart thinking. Your adventures in orthodontics await! As a team member you'll be able to enjoy benefits such as Medical, Dental, Vision, Competitive Salary, Paid Time Off, and Snack/Drink Room. Dive into a role where your contributions truly matter, and turn your workday into an exciting experience. Apply today and become part of something extraordinary! Make a difference as a Traveling Ortho Dental Assistant As a Full-Time Traveling Ortho Dental Assistant, your day-to-day expectations will keep you engaged and on your toes! You'll begin your mornings by prepping treatment areas and ensuring all necessary instruments are sterilized and ready for action. Assisting the orthodontist during procedures will be your main focus, as you'll provide chairside support and make patients feel comfortable. Don’t forget to educate patients on aftercare and best practices; your friendly demeanor will help ease any apprehensions they may have. You’ll also keep meticulous records of treatments and assist in the maintenance of equipment. Flexibility is key, as you'll be traveling to various locations, adapting to different office environments while collaborating with diverse teams. Your days will be filled with challenges, laughter, and the joy of transforming smiles! Requirements for this Traveling Ortho Dental Assistant job To thrive as a Full-Time Traveling Ortho Dental Assistant, you’ll need a unique blend of skills that go beyond technical know-how. First and foremost, strong communication skills are essential; you'll be interacting with patients of all ages and needs, ensuring they feel at ease during their visit. A genuine, friendly attitude is key to building rapport and creating a positive atmosphere. Flexibility and adaptability are crucial, as you'll be working in various locations and with different teams, often on the fly. Attention to detail is a must, ensuring that all treatments are executed accurately and patient records are maintained flawlessly. Additionally, being a team player is important; your ability to collaborate with orthodontists and dental hygienists will make for a seamless experience for everyone involved. If you bring a can-do spirit and a thirst for learning, you’ll excel in this dynamic role! Are you ready for an exciting opportunity? If you have these qualities and meet the basic job requirements, we'd love to have you on our team. Apply now using our online application! Job Posted by ApplicantPro

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician - Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State. As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount. You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications. Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: • Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications., • Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems., • Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions., • Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages., • Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy., • Comply with all Federal, State, and Company regulations while performing duties., • Collaborate with other crafts to assist in troubleshooting outside the central control system as needed., • Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency., • Communicate relevant information to succeeding shifts using management-approved methods., • Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems., • Maintain equipment records, logs, and updates, preparing reports and schedules as required., • Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion., • Ensure system configurations comply with FAA and accreditation requirements., • Possess working knowledge of software programming languages (e.g., Boolean, ladder, C+, C++) and numbering systems (binary, octal, hexadecimal)., • Understand electronic theory, computer and networking architecture, microprocessors, and discrete components., • Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems., • Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design., • Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes., • Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required., • Perform tasks associated with other job classifications when necessary to complete assignments., • Obtain and maintain applicable licenses, certificates, and certifications., • Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems., • Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards. Physical Demands and Potential Hazards: • Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs., • Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting., • Work in environments that may involve contact with metals, solvents, and coolants., • Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards., • Adapt to varying noise levels and atmospheric conditions., • Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.62 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications: • 3+ years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance., • 1+ years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms., • Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training. Preferred Qualifications: • Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment., • Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams., • Experience working around 3 phase, industrial voltages 480v, 277v, 208v., • Ability to work around electromagnetic fields as a result of various types of production equipment. Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process. Typical Education & Experience: High school graduate or GED preferred. Relocation: • This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: • This position is for a variety of shifts. Working in other shifts and/or overtime varies based on business needs. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Apr. 30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Description As an Assistant Manager you will be in a full-time position that offers benefits including; • 90 Day Performance-Based Increase, • Referral Bonus, • Medical, Dental and Vision Insurance, • 401K, • 2-4 years of experience as a Supervisor, or Team Lead at a retail store., • Must be at least 18 years of age (unless otherwise indicated by the hiring manager due to local regulations.), • High School diploma or GED preferred., • Must be able to provide proof of authorization to work in the United States if hired., • Ability to communicate effectively in English, both verbally and written is required., • Strong capability to understand and follow oral and written instructions., • Be physically able to lift, push, pull a minimum of 20 lbs., • Be able to work irregular shifts, including weekends, overnight shifts, and holidays., • Significant amount of work is performed indoors, but there are times when extended periods of work may be performed outside., • Ability to stand and/or walk for at least 8 hours., • Ability to occasionally lift and/or carry up to 20 pounds from ground to overhead up to 30 minutes of workday (i.e., assisting in stocking/maintaining inventory levels) with appropriate safety equipment's., • Ability to occasionally climb a ladder to store and retrieve materials, and/or place or remove signage.

Job Description About us: Cambridge Management, Inc. (CMI) began in 1987 as a small team managing a portfolio of communities in Tacoma, Washington. Our focus soon shifted to providing quality management for affordable housing communities. These affordable communities provide homes for those with limited incomes including families, senior citizens, and people with disabilities. Today, our team has grown to nearly 350 employees managing 120 communities and more than 9,000 apartment homes. Our portfolio includes market rate, Low Income Housing Tax Credit, and Project-Based Section-8 communities that range in size from 6 to 344 units. We currently manage communities in California, Florida, Hawaii, North Carolina, Oregon, Tennessee, Washington State, and Virginia. Why work for us: Cambridge Management, Inc. offers the following Compensation and Benefits package for full time employees: Position Salary Range: $32.00 - $34.00 Paid time off: • An accrual of 80 hours Vacation., • Up to 6 paid sick days per year. (varies based on state sick leave laws), • 8 paid holidays, • Medical, Dental, Vision, Life Insurance, Long Term Disability, AD&D & EAP, • 401(k) with employer match Under the direct supervision of the Regional Manager, the Community Manager is responsible for ensuring excellent customer service in the daily management of the multi-family community including, but not limited to coordinating all aspects of apartment community operations, maximizing cash flow while preserving assets, achieving budgeted NOI, ensuring LIHTC and or HUD compliance, providing a quality living environment for residents, and establishing a positive working environment for community team members. The Community Manager’s duties vary depending on the size of the community and the number of staff to which responsibilities might be delegated. Requirements Essential Functions The primary functions for this position are: • Oversee all financial performance of the property and work towards achieving budgeted NOI., • Ensure all OneSite data is correct by monitoring input and report functions, accuracy and timely preparation of leasing activities, A/R cash receipts, A/P Invoices, statements of disposition, monthly closing procedures, and late fees., • Recommend and oversee all capital improvements, deferred maintenance, and upgrade programs., • Serve as property representative in court proceedings under direction of legal counsel, understanding all property legal issues affecting residency, storage, abandonment, bankruptcy, fair housing, and unlawful detainer/eviction actions., • Support the leasing team by leasing apartments, responding to telephone inquiries, qualifying applicants, show apartments, ensuring all move-in paperwork is accurately prepared., • Maintain on-going, in-depth knowledge of associated market, market rents and demographics to give a competitive edge., • Monitor compliance with Fair Housing regulations, Tax Compliance regulations, and other laws as they relate to property specific guidelines and occupancy standards., • Recruit and select team members by understanding and adhering to CMI’s selection process policies, procedures, and core values. Financial • Maximize cash flow at the property by maximizing revenue, minimizing delinquencies, ensuring timely rent collection, monitoring banking activities and daily deposits, and contacting residents to collect overdue rent., • Develop cost-saving strategies to reduce budgeted expenses., • Create annual operating budget and business plan with accounting team and Regional Manager., • Prepare variance report monthly., • Review and analyze income, expenses, traffic, lease expirations, market rents, delinquency, financial statements, and make recommendations as needed., • Review and analyze all bid summaries for the purchase of goods and services, monitor the vendors’ work, and guarantee accurate invoicing., • Ensure that all contracted services and materials are accounted for and that the work has been performed properly and satisfactorily prior to the release of payment., • Monitor direction of rental activity and all on-site sales, marketing outreach, and advertising plans., • Evaluate and make recommendations for rental pricing., • Monitor daily move-in/move-out property status reports and manage the monthly renewal process., • Complete a daily inspection of the property and market-ready units., • Monitor and direct service operations to ensure service requests are completed within 24 hours and curb appeal standards are met., • Supervise safety and risk management functions, including coordinating monthly safety meetings., • Review resident retention programs, to continue to meet resident needs and improve retention., • Provide excellent customer service and display a courteous and professional attitude toward all customers., • Train, coach, and mentor team members, working with the training department as well as providing on-going feedback., • Create a team environment by holding weekly team meetings, establishing realistic goals, and fostering open communication., • Generate employee schedules and audit missed punches. Competency is based on education, training, skills and experience. To perform the job successfully, an individual should demonstrate the following knowledge, skills and competencies: • Superior management and professional leadership skills; capable of managing a team., • Knowledge and experience managing a multi-family operation, which includes financial reporting, sales, marketing, maintenance, and resident relations., • High degree of flexibility and tolerance for change, • Strong understanding of financial statements (budget, financial reports, P&L statement, general ledger, etc.)., • Superior customer service skills including the ability to manage difficult customers and/or situations., • Professional verbal and written communication skills., • Strong adherence to ethical standards including, but not limited to, the ability to maintain confidentiality and fiduciary responsibility., • Detail oriented; ability to manage conflicting priorities and to adjust priorities daily., • Working knowledge of Office 365., • Must have excellent computer skills and have industry software experience. RealPage’s OneSite competency will be required following specific CMI training., • Requires sitting, standing, and walking for prolonged periods., • Position requires frequent/daily reaching, pushing, pulling, and lifting up to 20 pounds., • Position includes communication mastery in the form of electronic mail, writing letters, memos, documents, and any other correspondence in written form including reports. This position must also be proficient in face-to-face, telephone, and other median of conversation styles for prolonged periods, up to 6 hours per workday. This position also requires contact with external customers and others (face-to-face, telephone, or otherwise)., • Requires competition or awareness of competitive pressures and the ability to meet strict deadlines., • Position can include conflict situations. Requires the ability to deal with unpleasant, angry, or discourteous people in a professional manner., • Requires making decisions that impact the results of co-workers, clients, or the company., • Requires being exact or highly accurate. May include freedom to determine tasks, priorities, make decisions in a timely manner and make goals. Requires repeating the same physical or mental activities over and over., • Pace and Scheduling: Requires meeting strict deadlines., • Personal Interaction: Requires working with others in a group or team. Requires coordinating or leading others in accomplishing work activities., • High School Diploma or equivalent, Bachelor’s degree or CPM highly preferred, • Experience in managing LIHTC and HUD multi-family properties., • Property Management Certification (ARM, CAM, etc.) preferred., • 3+ year’s property management experience., • One-year supervisory experience. Must be able to travel to and from a bank and other off-site locations as a requirement of this position. A valid driver’s license is required if perming these tasks or driving a golf cart. Must be able to complete all required training within thirty (30) days of hire date. This job description in no way states or implies that these are the only duties to be performed by the team member incumbent in this position. Further, this document does not create an employment contract implied or otherwise, other than an “at will” relationship. Additional Notes Offers contingent upon successful completion of background check, drug screen, and MVR check (if required b

Job Description We are seeking a reliable and experienced 1099 Independent Contractor Delivery Driver to join our team. In this role, you will operate company-provided box trucks, sprinter vans, or cargo vans to complete scheduled delivery routes. This is a contractor position and does not include health or dental benefits. Responsibilities • Safely operate box trucks, sprinter vans, and other commercial vehicles (including manual transmission when required)., • Load and unload products using forklifts, pallet jacks, and other material-handling equipment, ensuring all items are properly secured for transport., • Deliver goods to residential and commercial locations while providing prompt, professional, and friendly customer service., • Verify all delivery orders against shipment documents for accuracy before departure and upon delivery., • Navigate delivery routes efficiently using GPS or route sheets, adjusting for traffic or road conditions as needed., • Assist with basic warehouse tasks such as organizing inventory, staging freight, and preparing shipments., • Maintain vehicle cleanliness and conduct routine safety and pre-trip inspections., • Communicate clearly with dispatch regarding route progress, delays, or issues., • Follow all safety protocols and traffic regulations to ensure a safe work environment., • Perform heavy lifting when required, using proper lifting techniques and maintaining physical stamina throughout the workday. Position Details • 1099 Independent Contractor (no health/dental benefits), • Company-provided van/sprinter or box truck, • Weekly payments, • Opportunities for consistent work and route stability

US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Drug Free Workplace: Boeing is

Job Description At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Boeing Commercial Airplanes is excited to offer opportunities for a Flexible Machining System (FMS) Operator to join our Fabrication team in Auburn & Puyallup WA. As a Flexible Machining System (FMS) Operator you will have the opportunity to work with advanced CNC technology, ensuring precision and efficiency in the machining process. Your expertise will be essential in optimizing machine setups and operations, contributing to the production of high-quality components that meet stringent industry standards You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Prepare for job setup by reviewing work orders, tie-in sheets, operator documents, blueprints, or CATIA plots for production orders, first lots, or tool tryouts. Review Work Orders (W/O) to confirm the correct type and quantity of materials and tools or fixtures are issued and free from visible defects, updating CMES as necessary. Identify the type of setup required based on documentation and check machine setups or parts completed by previous operators to assess job progress and ensure safe working conditions. Attach air nozzles or suction devices for vacuum fixtures, securing them with bolts or clamps as specified in the operator setup documents. Use overhead cranes to load and unload parts and fixtures as required for the machining process. Upload and download CNC (Computer Numerical Controlled) programs to machine controllers using computing equipment from various servers or databases. Select and check cutting tools according to program specifications, ensuring they are the correct type, length, diameter, and in good condition before installation. Set machine coordinates or index points per CNC documents, including cutter offsets, tool heights, and probes, using appropriate measuring tools. Run CNC programs to machine rough and precision cut parts, monitoring machine operations for unusual vibrations, sounds, or warning indicators. speeds and feeds) to correct machining issues or prepare the machine for subsequent operations, including head and spindle angles. Perform Statistical Process Control (SPC) functions as required to ensure quality standards are met. Check completed work for defects and ensure parts meet drawing specifications, removing sharp edges with deburring tools as required. Maintain personal and tool certifications and assist planners or programmers in determining final numerical control programs to optimize machine utilization and minimize setups. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. US Person" includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). 2+ years of experience setting up and operating Manual and CNC machines Experience in Fabrication of airplane parts Experience in Fabrication of temporary tooling High school graduate or GED preferred. Relocation: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement : The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. Applications for this position will be accepted until Apr. Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Description As an Assistant Manager you will be in a full-time position that offers benefits including; • 90 Day Performance-Based Increase, • Referral Bonus, • Medical, Dental and Vision Insurance, • 401K, • 2-4 years of experience as a Supervisor, or Team Lead at a retail store., • Must be at least 18 years of age (unless otherwise indicated by the hiring manager due to local regulations.), • High School diploma or GED preferred., • Must be able to provide proof of authorization to work in the United States if hired., • Ability to communicate effectively in English, both verbally and written is required., • Strong capability to understand and follow oral and written instructions., • Be physically able to lift, push, pull a minimum of 20 lbs., • Be able to work irregular shifts, including weekends, overnight shifts, and holidays., • Significant amount of work is performed indoors, but there are times when extended periods of work may be performed outside., • Ability to stand and/or walk for at least 8 hours., • Ability to occasionally lift and/or carry up to 20 pounds from ground to overhead up to 30 minutes of workday (i.e., assisting in stocking/maintaining inventory levels) with appropriate safety equipment's., • Ability to occasionally climb a ladder to store and retrieve materials, and/or place or remove signage.

If you are a current associate, you will need to apply through our internal career site. Please log into Workday and click on the Jobs Hub app or search for Browse Jobs. SUMMARY OF JOB PURPOSE AND FUNCTION The Client Service Coordinator ("CSC") drives the flow of clients and pets through the hospital, maximizes the productivity of the veterinary medical team (in terms of numbers of clients and pets), ensures good communication with associates and clients, and coordinates the care of clients and pets in a happy, welcoming, friendly and efficient manner, influencing clients to return and refer their friends and families. Description - External ESSENTIAL RESPONSIBILITIES AND TASKS * Live and exemplify the Five Principles of Mars, Inc. within self and team. * Actively recruit new clients by promoting hospital services and route the flow of clients and pets to ensure superior client care and maximum productivity of the veterinary medical team. * Maximize the number of pets seen by the hospital team through through a productive and efficiently run hospital to support the needs of our wellness plan clients. * Provide professional, efficient and exceptional service at all times. This includes encouraging hospital visits, welcoming clients and pets, ensuring that they are comfortable in the hospital, and educating them about their pet's health. * Educate clients about Optimum Wellness Plans, preventative care, pet health needs and hospital services * Assist incoming clients by completing the required documentation, entering all pet information and history in the computer, utilizing proper collars and tags for identification, and ensuring prompt service. * Assist outgoing clients by providing all necessary instructions, information and invoices, dispensing prescription items per the veterinarian's instructions, selling retail products and scheduling future appointments. * Manage the finances by maintaining accurate balances and utilizing proper opening and closing procedures. * Conduct administrative functions as necessary. * Other job duties as assigned. THE FIVE PRINCIPLES * Quality - The consumer is our boss, quality is our work and value for money is our goal. * Responsibility - As individuals, we demand total responsibility from ourselves; as associates, we support the responsibility of others. * Mutuality - A mutual benefit is a shared benefit; a shared benefit will endure. * Efficiency - We use resources to the full, waste nothing and do only what we can do best. * Freedom - We need freedom to shape our future; we need profit to remain free. HIRING QUALIFICATIONS / COMPETENCIES Leadership - Customer Focus - Peer Relationships - Integrity & Trust CAPABILITIES AND EXPERIENCE (CAN DO) * Ability to multi-task- Manages multiple tasks at one time; quickly and accurately shifts attention among multiple tasks under distracting conditions without loss of accuracy or appearance of frustration. * Communication skills - Reads, writes and speaks fluent English, using appropriate grammar, style and vocabulary. Correctly spells commonly used English words and job specific terms. Demonstrates exceptionally strong written and verbal communication skills. * Organizational ability - Demonstrates a systematic approach in carrying out assignments. Is very orderly and excels at cutting through confusion and turning chaos into order. * Problem solving skills - Demonstrates a strong ability to identify, analyze and solve problems. Translates problems into practical solutions. * Client service skills - Consistently ensures the team provides the client with attentive, courteous and informative service. Gains and shows personal satisfaction from delivering great service. * Intellectual ability - Accurately and consistently follows instructions delivered in an oral, written or diagram format. Can provide directions. * Mathematical ability - Ability to add, subtract, multiply and divide, and to compute rate, ratio and percent; ability to convert units of measurement. * Computer skills - Comfortably and confidently uses a computer and specialized software. Microsoft Word, Excel, Access, Outlook, etc. ATTITUDES (WILL DO) * Initiative - shows willingness and aptitude to use own discretion in taking appropriate steps in finding solutions to problems; presents options and ideas to enhance current processes or procedures. Takes on additional responsibility when both big and small tasks need to be done. * Integrity - Firmly adheres to the values and ethics of Banfield Pet Hospitals. Exhibits honesty, discretion, and sound judgment. * Cooperativeness - Willing to work with others, collaborating and compromising where necessary; promptly share relevant information with others. * Flexibility - Is open to changing situations and opportunities and is willing to perform all tasks assigned. * Independence - Able and willing to perform tasks and duties without supervision. * Tolerance for Stress / Resiliency - Maintains a positive "can do" outlook, rebounds quickly from frustrations and unpleasantness, and maintains composure and friendly demeanor while dealing with stressful situations. SPECIAL WORKING CONDITIONS * Ability to work at a computer for long periods of time. * Ability to be confident around pets (i.e., dogs, cats, birds, reptiles, etc.) * Client needs and work volume may often require more than 40 hours per week to complete essential duties of this job. This position requires special hours including working weekends and evenings. * Must have mental processes for reasoning, remembering, mathematics and language ability (reading, writing, and speaking the English language) to perform the duties proficiently. * The noise level in the work environment is moderately high. * Requires sufficient ambulatory skills in order to perform duties while at hospital. * Ability to stand, walk, stoop, kneel, crouch, and climb as well as manipulate (lift, carry, move) up to 50 pounds. * Requires good hand-eye coordination, arm-hand-finger dexterity with the ability to grasp, and visual acuity to use a keyboard and operate equipment. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * Associate is routinely exposed to a variety of pets that may bite or scratch, and on occasion, exposed to anesthesia, radiation, biological hazards and medication/controlled substances. EXPERIENCE, EDUCATION AND/OR TRAINING * High School Diploma or equivalent preferred. * Must be at least 18 years old to perform duties involving radiography (x-ray) and exposure to radioactive substances. * One year related experience required with customer service preferred. * Medical background (veterinary technician, human healthcare, pharmaceutical, etc.) with medical terminology training is preferred. WE ARE A DRUG-FREE, SMOKE-FREE, EQUAL OPPORTUNITY EMPLOYER. Banfield Pet Hospital strongly supports and values the uniqueness of all individuals and promotes a work environment where diversity is embraced. Banfield Pet Hospital is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, genetic information, status as a protected veteran, or status as a qualified individual with disability. Banfield Pet Hospital complies with all applicable federal, state and local laws governing nondiscrimination in employment in every Banfield location. The pay range for this role is $17.70 - $22.62 Hourly The pay range listed reflects a general hiring range for the area , with the specific rate determined based on the candidate's experience, skill level, and education, and may vary depending on location or applicable minimum wage laws. Here at Banfield, w e prioritize your well-being and professional growth by offering a comprehensive total rewards package, including health, wellness, and financial support for you, your family, and even your pets. Check out s ome of o ur " M eow-velous" benefits: * Comprehensive Medical, Dental, and Vision Insurance: Enjoy peace of mind knowing your health and wellness are our top priorities. We've got your essential medical, dental, and vision care covered . * Generous Retirement Plans (401(k) and Roth): Invest in your future and enjoy a generous company match to help you build a secure financial future.* * Best-in-Class Student Debt Relief Program (for Full-Time DVMs): At Banfield, we understand the significant financial burden of student debt on veterinarians. We are committed to supporting our veterinary professionals and believe that addressing student debt is crucial for the long-term health of the veterinary profession. * Paid Time Off and Holidays: Take a break , recharge your wellbeing , and celebrate days of personal significance with paid time off and holidays. * * Top-Tier Mental Health and Wellbeing Resources: Your mental health matters. Access our industry-leading resources, including free coaching and counseling sessions, to support your overall wellbeing and help you thrive.* * Associate Life Insurance (company-paid) & Supplemental Life Insurance: Protect your loved ones with our company-paid Associate life insurance and have the option to purchase additional coverage for extra peace of mind. * Company-Paid Short- and Long-Term Disability: Feel secure knowing that if you face a temporary or long-term disability, you'll have financial protection . * Flexible Spending Accounts (FSA): Save on healthcare and dependent care expenses by setting aside pre-tax money. It's a smart way to manage your budget and take care of your needs. * Health Savings Account (HSA): Make the most of your healthcare dollars with a tax-advantaged HSA, allowing you to pay for medical expenses with pre-tax funds. * Paid Parental Leave: We support growing families with paid parental leave for both birth and adoption, giving you precious time to bond with your new family addition. * Continuing Education Allowance (for Eligible Positions): Banfield is committed to supporting the professional growth of our Associates. This allowance provides financial assistance to pursue continuing education opportunities.* * Back-Up Child and Elder Care & Family Support Resources : When life's unpredictable moments arise, our backup care and family support benefits provide the help you need to keep things running smoothly.* * Fertility and Family Building Support: We're here for you on your journey to parenthood, offering comprehensive support for fertility treatments and family-building options. * Digital Exercise Therapy: Stay active and healthy with our digital exercise therapy program, designed to fit your busy lifestyle, and keep you moving. * Voluntary Protection Benefits: Get peace of mind with protection against the unexpected. You can purchase coverage to help support you financially during hospital stays, critical illness, and accidents.* * Legal Plan: Gain extra peace of mind with our affordable and accessible legal plan which includes coverage for a wide range of legal needs.* * Identity Protection: Identity Protection helps safeguard your personal information by alerting you to suspicious activity and providing support if your information is stolen.* * Commuter Benefits: Say goodbye to commuting stress with our commuter benefits, making your daily journey more convenient and cost-effective.* * Three Free Optimum Wellness Plans for Pets: We care about your furry friends too! Enjoy three free wellness plans to ensure your pets receive the best preventive and general care.* * Exclusive Discounts: Unlock a world of savings with our wide variety of exclusive discounts on products and services, making life more affordable and enjoyable. * Benefits eligibility is based on employment status. Full-time (FT) Associates are eligible for all benefit programs (Student Debt Program available for FT DVMs only); Part-time Associates are eligible for those benefits with an asterisk (*).

Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for a Industrial Maintenance Electricians, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington. As a Industrial Maintenance Electrician you will be a vital part of our manufacturing team installing, maintaining electrical equipment. Operate, install electrical systems and preform functional of building and plant equipment. You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation. Position Responsibilities: - Operate, install electrical systems and perform functional testing of building and plant equipment (e.g., machines, motor controls, room re-models) - Determine if system should be shut down or work must be performed with power source on - Lock out, tag out, try out equipment and related systems - Perform primary and secondary testing on electrical breakers during routine maintenance; replace, update and retro fit breakers - Perform routine tests on high voltage switches and relays, using hi-potential test equipment (Hipot), replace switch or relay - Troubleshoot electric motors using appropriate test equipment - Monitor current, voltage, amperage, frequency and watts hours at sub-stations using online computing system - Check and service electrical systems, using infrared analysis sheets to locate hot spots in service panel - Service and maintain electrical systems on various types of overhead cranes - Operate, install electrical systems and perform functional test of building and plant equipment (e.g., machines, motor controls, room re-models) - Install and perform routine maintenance on all types of lighting fixtures (e.g., fluorescent, halide, standard); clean and check sockets, and replace ballast and bulbs - Run high voltage electrical cable from sub-station to unit station; cut and splice cable, test cable for resistance - Install, replace and repair fiber optic cable for computers and computing systems - Bend conduit and install junction boxes; pull wire of various gauge and color through conduit using a fish tape; install and connect switches and outlets - Check work after completion or after each operation; ensure job is per drawing and WAC, NEC codes; evaluate job for work to be performed (e.g., wire size, electrical load, conduit) - Operate mechanical lifts of various types (e.g. tiger lift, spider lift, snorkel lift), to access work areas - Install wire, crimp, terminate, and solder using tools (e.g., crimpers, wire cutters, soldering gun) in plant electrical systems - Establish/verify voltage, amperage, frequency and watts using test equipment (e.g., circuit trackers, sonic circuit chasers, volt, amperage meters) Physical Demands and Potential Hazards: - Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications - 3+ years of experience as an Electrician or Apprentice. - 1+ years of experience maintaining industrial equipment. - Experience working from heights and using fall protection equipment with weight limitations . - Must be able to lift, push and pull up to 35 pounds frequently within an 8 hour shift. - Must be able to complete fall protection training. Preferred Qualifications: - Electrician license (EL01 &/or EL 07) or an electrical card. - Crane related experience. - Experience with prime power. Typical Education & Experience: High school graduate or GED preferred. Relocation: - Relocation assistance is not a negotiable benefit for this position. Candidate must live in the immediate are or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: - This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $33.32 per hour – $61.01 per hour Applications for this position will be accepted until May. 29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. Must be 18 or older. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description About RTCA: RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact The CNC Setup Machinist is responsible for independently setting up and operating CNC machines to produce precision aerospace components. This role requires a strong understanding of feeds, speeds, and tooling to improve operational efficiency and ensure conformance to specifications. Working closely with Quality, Engineering, and Operations, the CNC Setup Operator II contributes to continuous improvement while maintaining high standards of safety, accuracy, and productivity. What you’ll be doing as a Setup Machinist (Mill & Lathe): • Working a Full-time, onsite position at our Fife, WA location., • Set up CNC machines, including loading fixtures, boring jaws, selecting and setting tools, and running programs., • Make offset adjustments and tool changes as required, ensuring optimal machining performance., • Adjust feeds, speeds, and tooling to improve efficiency and prevent non-conforming parts., • Perform and document first article inspections, presenting results to the Quality department., • Verify workpiece conformance using precision measuring instruments (micrometers, calipers, indicators, height gages, etc.)., • Interpret and work from blueprints, drawings, setup sheets, and written specifications., • Operate multiple machines simultaneously, including 4-axis and 5-axis equipment., • Monitor machine performance, troubleshoot minor issues, and provide tie-in notes to communicate status across shifts., • Maintain high efficiency, quality standards, and low scrap/rework rates., • Perform preventive maintenance on machines and tooling in accordance with schedules., • Collaborate with Quality and Engineering to identify improvements and resolve machining challenges., • Ensure adherence to safety protocols and contribute to a clean, organized work environment., • Minimum 3 years of CNC setup and operating experience in a manufacturing environment., • Strong knowledge of feeds, speeds, and tooling for aerospace-grade metals and alloys., • Proficient in blueprint reading, geometric dimensioning and tolerancing (GD&T), and trigonometry., • Skilled in setting up and inspecting workpieces with precision measuring instruments., • Experience with 4th and 5th axis machines, capable of running multiple machines simultaneously., • Ability to make accurate offsets and adjustments within ±.002 tolerance., • Mechanically inclined with excellent manual dexterity and attention to detail., • Strong math aptitude, problem-solving skills, and ability to work independently with minimal supervision., • Effective communication skills, both written and verbal., • Minimum 3 years of CNC setup and operating experience in a manufacturing environment., • Strong knowledge of feeds, speeds, and tooling for aerospace-grade metals and alloys., • Proficient in blueprint reading, geometric dimensioning and tolerancing (GD&T), and trigonometry., • Skilled in setting up and inspecting workpieces with precision measuring instruments., • Experience with 4th and 5th axis machines, capable of running multiple machines simultaneously., • Ability to make accurate offsets and adjustments within ±.002 tolerance., • Mechanically inclined with excellent manual dexterity and attention to detail., • Strong math aptitude, problem-solving skills, and ability to work independently with minimal supervision., • Effective communication skills, both written and verbal. The physical demands and work environment characteristics described here are representative of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to do the following: • Ability to lift or move up to 50lbs., • Reach forward, up, down and to the side in order to move equipment., • Continuous standing and walking throughout the workday., • Ability to reach with hands and arms; use hands to manipulate, handle, or feel material., • Access, input, and retrieve information from a computer. Work Environment: A large percentage of work time is spent in a machine shop where temperatures vary from hot to cold. The environment may also include exposure to noise, dust, fumes, vapor from coolant, etc. Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required. Compensation and Benefits: Employee Benefits: Medical, dental, vision, basic and supplemental life insurance, long-term disability and 401(k) with up to 6% QACA company match. The CNC Setup Machinist Compensation range for onsite Washington applicants is $25/hr - $40/hr commensurate with experience. Some shifts may include shift differential pay rates. Other site ranges may differ. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Affirmative Action and Disability Accommodation Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact the RTCA Human Resources Department. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the RTCA Human Resources Department. Candidates will receive consideration without discrimination in accordance with the requirements of article 9 to chapter XVIII of the City of Los Angeles Municipal Code, federal and state laws of California. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department. Compensation details: 25-40 Hourly Wage PI99aab458b395-25405-39855676

Job Description About RTCA: RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact This role is responsible for ensuring mill production team is actively engaged to meet daily customer demand and production schedule. The CNC Mill Lead provides effective training to the team and ensures safety and quality standards are always maintained. What you’ll be doing as a Mill Machinist Lead (5-Axis): • Working a Full-time, onsite position at our Fife, WA location., • Work with Manager and other team leads to manage and prioritize staffing assignments to ensure customer demand and the production schedule are met., • Execute and coordinate employee training to ensure that procedures are followed and met all quality requirements., • Use basic problem-solving skills to ensure stable operation of the manufacturing floor., • Report problems or concerns with quality, processes, equipment, materials and labor to Production Manager., • Work closely with support staff such as Manufacturing Engineering, Program Managers, Materials/Warehouse to resolve issues., • Sustain and drive lean manufacturing and 6S activities., • Ensure effective employee relations. Provide employee coaching and development. Resolve employee issues through problem resolution and consultation with Production Manager and HR., • Meet department and personal expectations for productivity, quality, and strive for continuous improvement., • Follow guidelines for work scheduling and understand delivery objectives., • Report any machine or process problems or variances to Process Improvement Coordinator/Production Manager., • Follows all safety guidelines established by the Company, including proper use of equipment and procedures., • Good work ethic and maintains good attendance. (Regular and punctual attendance is an essential function of this position)., • Five years’ experience in the manufacturing industry with knowledge of speeds and feeds and one year of lead or other leadership experience., • Previous Knowledge of tooling, fixtures, materials, and processes., • Experience with MS applications., • Strong aptitude in math and blueprint ready., • Have 5-Axis CNC Mill Machining Experience., • Communicate pertinent information well with others and is a company team player., • Able to perform multiple tasks, running several machines simultaneously., • History of good work standards, good quality, and team participation., • Competent in the operation and performance of multiple machining tools., • Works independently, follows instructions, can concentrate for long periods of time Physical Demands: The physical demands and work environment characteristics described here are representative of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to do the following: • Ability to lift or move up to 50lbs., • Reach forward, up, down and to the side in order to move equipment., • Continuous standing and walking throughout the workday., • Ability to reach with hands and arms; use hands to manipulate, handle, or feel material., • Access, input, and retrieve information from a computer. Work Environment: A large percentage of work time is spent in a machine shop where temperatures vary from hot to cold. The environment may also include exposure to noise, dust, fumes, vapor from coolant, etc. Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required. Compensation and Benefits: Employee Benefits: Medical, dental, vision, basic and supplemental life insurance, long-term disability and 401(k) with up to 6% QACA company match. The Mill Machinist Lead (5-Axis) Compensation range for onsite Washington applicants is $35/hr - $50/hr with experience. Some shifts may include shift differential pay rates. Other site ranges may differ. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Affirmative Action and Disability Accommodation Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact the RTCA Human Resources Department. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the RTCA Human Resources Department. Candidates will receive consideration without discrimination in accordance with the requirements of article 9 to chapter XVIII of the City of Los Angeles Municipal Code, federal and state laws of California. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department.

Job Description About RTCA: RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact A CNC Operator can transform a rough product into something complete within exacting tolerances. They enable an organization to produce products on time and to a customer’s requirement. Operators work alongside many departments such as: Quality, Engineering, and Operations to produce high-quality products. What you’ll be doing as a CNC Operator (Mill & Lathe): • Working a Full-time, onsite position at our Fife, Washington location., • Working under close supervision, operate CNC mills and/or Lathes, • Load and unload parts, • Keep up with production / meet time standards., • Inspect fixture of no FOD, • Proper use of inspection equipment, • Basic knowledge of reading blueprints., • Must be able to make offsets and adjustments with supervision, • Must be able to do tool changes with supervision, • Read, interpret, and adhere to work instructions, regulations, manuals, and quality procedures, • Properly operate, maintain, and store mechanical tools and equipment required to perform the job, • Report job status to the supervisor including any malfunctions, non-conformances, damaged equipment, or other obstacles to production, • Support Continuous Improvement efforts, • Follow all safety guidelines established by the Company, including proper use of equipment and procedures, • Works independently, follows instructions, can concentrate for long periods of time, • Demonstrates a good attitude toward work and arrives on time for start of shift, • Follows instructions and demonstrates strong attention to detail, • Communicates well verbally and in writing, • Mechanically inclined, with good manual dexterity, • Team player with a can-do attitude, • High degree of mechanical aptitude (are you good with your hands, mechanics, building things), • 1-2 years’ CNC experience in the manufacturing industry with knowledge of speeds and feeds, • Proficiency with typical precision measurement tools such as dial indicators, bore gauges, micrometers, calipers, and other common inspection tools Physical Demands: The physical demands and work environment characteristics described here are representative of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to do the following: • Ability to lift or move up to 50lbs., • Reach forward, up, down and to the side in order to move equipment., • Continuous standing and walking throughout the workday., • Ability to reach with hands and arms; use hands to manipulate, handle, or feel material., • Access, input, and retrieve information from a computer. Work Environment: A large percentage of work time is spent in a machine shop where temperatures vary from hot to cold. The environment may also include exposure to noise, dust, fumes, vapor from coolant, etc. Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required. Compensation and Benefits: Employee Benefits: Medical, dental, vision, basic and supplemental life insurance, long-term disability and 401(k) with up to 6% QACA company match. The CNC Operator (Mill & Lathe) Compensation range for onsite Washington applicants is $20/hr - $23/hr commensurate with experience. Some shifts may include shift differential pay rates. Other site ranges may differ. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Affirmative Action and Disability Accommodation Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact the RTCA Human Resources Department. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the RTCA Human Resources Department. Candidates will receive consideration without discrimination in accordance with the requirements of article 9 to chapter XVIII of the City of Los Angeles Municipal Code, federal and state laws of California. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department.

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description About RTCA: RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact Qualified Screw Set-up & Programming Level Machinist will have exemplary manufacturing skills, a working knowledge and experience as a Citizen Type Swiss Programmer/Machinist. Must have working knowledge and experience working Citizen A-20 and A-32 machines and a dedication to being part of a world class manufacturing team. What you’ll be doing as a Swiss Machinist: • Working a Full-time, onsite position at our Fife, WA location supporting our swing shift., • Setup and program Citizen A-20 and A-32, • Monitor the screw machine, make changes to speed, feed rates or tool position to ensure parts meet blueprint requirements, • Verify conformance of finished work piece to specifications using standard measuring tools, • Work with small parts and close tolerances (+/-.0001), • Must be able to develop CNC programs manually or using Mastercam, Partmaker or Espirit., • Ensure that all traceability for the work is complete according to ISO 9001 procedures, • Meet job standard times with minimal supervision, • Recognize production problems and communicate them to supervisor, • Demonstrate a good attitude and work ethics, • Read and interpret manufacturing and engineering drawings, • Utilize knowledge of G and M codes (use of Mastercam or PartMaker is desirable), • Follow all safety guidelines established by the Company, including proper use of equipment and procedures, • Minimum five years’ experience programming and setup of Swiss Type Screw Machines (Citizen, Star, Tsugami), • Ability to work independently, follow instructions, and can concentrate for long periods of time, • Properly use basic measuring tools (calipers, micrometer, indicators, etc.), • Mechanically inclined, with good manual dexterity, • Minimum 5 years CNC Swiss Type Lathe Experience, • Possess above average planning as well as follow-through capabilities, • Experience with MS applications, • Strong skills and aptitude in math, • Good verbal and writing communication skills The physical demands and work environment characteristics described here are representative of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to do the following: • Ability to lift or move up to 50lbs., • Reach forward, up, down and to the side in order to move equipment., • Continuous standing and walking throughout the workday., • Ability to reach with hands and arms; use hands to manipulate, handle, or feel material., • Access, input, and retrieve information from a computer. Work Environment: A large percentage of work time is spent in a machine shop where temperatures vary from hot to cold. The environment may also include exposure to noise, dust, fumes, vapor from coolant, etc. Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required. Compensation and Benefits: Employee Benefits: Medical, dental, vision, basic and supplemental life insurance, long-term disability and 401(k) with up to 6% QACA company match. The Swiss Machinist Compensation range for onsite Washington applicants is $23/hr - $33/hr commensurate with experience. Some shifts may include shift differential pay rates. Other site ranges may differ. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Affirmative Action and Disability Accommodation Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact the RTCA Human Resources Department. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the RTCA Human Resources Department. Candidates will receive consideration without discrimination in accordance with the requirements of article 9 to chapter XVIII of the City of Los Angeles Municipal Code, federal and state laws of California. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department.

Job Description About RTCA: RTCA is a precision aerospace and defense manufacturing group built on decades of hands-on machining expertise, with roots spanning more than 50 years. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals. Unlike large organizations where roles can be narrow, RTCA offers hands-on ownership and real visibility – you understand how your work supports the team, the operation, and the end customer. Our flat structure allows employees to take initiative, grow their skills, and have their contributions recognized, while still providing the stability, advanced technology, and meaningful work of an established aerospace manufacturer. At RTCA, we believe in teamwork, excellence, and delivering with pride. One Team! One Mission! How You’ll Make an Impact Qualified Lead CNC Machinist will have the exemplary manufacturing skills, a working knowledge and experience on a variety of CNC machines and controls, and a dedication to being part of a world class manufacturing team. What you’ll be doing as a CNC Lathe Machinist Lead (Multiple Shifts): • Working a Full-time, onsite position at our Fife, WA location., • Work with shop foreman and Manager, to organize the work for the evening., • Work with the employees to maintain, and improve efficiencies while maintaining quality., • Inspect work using gaging and inspection equipment to verify conformance to specifications., • Meet department and personal expectations for productivity, quality, and strive for continuous improvement., • Follow guidelines for work scheduling and understand delivery objectives., • Communicate pertinent information well with others, and is a company/ team player., • Good work ethic and maintains good attendance. (Regular and punctual attendance is an essential function of this position)., • Report any machine or process problems or variances to Foreman/Manager., • Able to perform multiple tasks, running several machines simultaneously., • Follows all safety guidelines established by the Company, including proper use of equipment and procedures., • Previous experience as a Lead/Supervisor, or other leadership role., • Previous Knowledge of tooling, fixtures, materials and processes., • Must have an understanding of the machinery (Mills and lathes)., • History of good work standards, good quality, and team participation., • Competent in the operation and performance of multiple machining tools., • Computer skills. Ability to look up the files as necessary., • Must be able to qualify simple parts using a variety of inspection equipment., • Good mathematical and print reading skills., • Ability to work with minimal supervision., • Works independently, follows instructions, can concentrate for long periods of time, • Five years’ experience in the manufacturing industry with knowledge of speeds and feeds and two years of lead or other leadership experience, • Experience with MS applications The physical demands and work environment characteristics described here are representative of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to do the following: • Ability to lift or move up to 50lbs., • Reach forward, up, down and to the side in order to move equipment., • Continuous standing and walking throughout the workday., • Ability to reach with hands and arms; use hands to manipulate, handle, or feel material., • Access, input, and retrieve information from a computer. Work Environment: A large percentage of work time is spent in a machine shop where temperatures vary from hot to cold. The environment may also include exposure to noise, dust, fumes, vapor from coolant, etc. Industry standard safety equipment is provided by the Company, and specific notice is posted in areas where safety equipment is required. Compensation and Benefits: Employee Benefits: Medical, dental, vision, basic and supplemental life insurance, long-term disability and 401(k) with up to 6% QACA company match. The CNC Lathe Machinist Lead (Multiple Shifts) Compensation range for onsite Washington applicants is $35/hr - $50/hr commensurate with experience. Some shifts may include shift differential pay rates. Other site ranges may differ. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. RTCA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Affirmative Action and Disability Accommodation Applicants wishing to receive information on RTCA’s Affirmative Action Plans, or applicants requiring a reasonable accommodation in order to participate in the application and/or interview process, please contact the RTCA Human Resources Department. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the RTCA Human Resources Department. Candidates will receive consideration without discrimination in accordance with the requirements of article 9 to chapter XVIII of the City of Los Angeles Municipal Code, federal and state laws of California. If you are a qualified individual with a disability or a disabled veteran, you have the right to request an accommodation if you are unable or limited in your ability to use or access our career center as a result of your disability. To request an accommodation, contact the Human Resources Department.

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location We use eVerify to confirm U.S. Employment eligibility.

Job DescriptionSalary: $24-$26 Start Location: Gig Harbor, WA Pay Range: $24$26 per hour (based on experience) Schedule: Full-time, MondayFriday or 4x10 schedule available Murrays Collision is seeking a skilled and motivated Mobile Mechanic to support all Murrays Collision locations. This role will start each day at our Gig Harbor shop, then travel as needed to perform ADAS calibrations and post-collision mechanical support across our stores. This position is ideal for a technician who enjoys working independently, traveling between locations, and specializing in advanced safety systems and diagnostics, while maintaining high standards of safety, quality, and efficiency. What Youll Do • Start each workday at our Gig Harbor location and travel to other Murrays Collision shops as needed, • Perform ADAS calibrations and post-repair system validations in accordance with OEM requirements, • Diagnose and repair post-collision mechanical and electrical damage, • Complete mechanical repairs including brakes, suspension, steering, exhaust, engine-related components, electrical systems, HVAC, restraints, and airbags, • Perform post-repair scans and diagnostics using approved scan tools, • Follow OEM repair procedures and manufacturer service manuals, • Document all repairs, calibrations, and services accurately in the shop management system, • Inspect, test, and road-test vehicles to ensure repairs meet specifications, • Communicate with production and estimating teams to support on-time delivery, • Assist with DFRs and reassembly when appropriate, • Participate in daily production or release meetings as needed, • Maintain a clean, organized, and safe work area while following OSHA and safety guidelines, • Continue learning new vehicle technologies, repair methods, and ADAS systems, • May assist with limited body work as directed based on shop needs and performance What Were Looking For • 2+ years of automotive mechanical and electrical repair experience preferred, • Experience or strong interest in ADAS calibrations and advanced diagnostics, • Strong diagnostic and problem-solving skills, • Experience with suspension, braking, electrical, and drivetrain systems, • ASE certification or equivalent preferred; I-CAR training a plus, • Ability to read and follow manufacturer repair manuals, • Valid drivers license and insurable driving record Work Environment • Mobile role supporting multiple Murrays Collision locations, • Exposure to paint fumes, dust, chemicals, and varying temperatures, • Shop and field environments with intermittent noise, • Physical role requiring lifting up to 50 lbs, bending, standing, and repetitive motions Benefits Include: • 401(k), • 401(k) matching, • Medical, dental, and vision insurance, • Life insurance, • Paid time off If youre looking to grow your mechanical career while specializing in ADAS and mobile repair supportstarting each day in Gig Harbor, WAapply today and join the Murrays Collision team.

Job DescriptionCompany Description $1500 Sign-on Bonus! Shift: Mon - Fri 12:00pm - 8:30pm Clean Earth is a leading provider of environmental services in the United States providing remediation, disposal, recycling, and beneficial reuse solutions for hazardous and non-hazardous waste, contaminated soil, and dredged material. Our vast portfolio of technologies and services touches nearly every industry that generates waste including energy, infrastructure, commercial, industrial, retail, and healthcare markets. Every day our teams across the country take a hands-on, dedicated approach to recycling and beneficially reusing waste that would otherwise go into landfills. We value our employees as our most important asset, and this is reflected in many areas across our company including recently being named a 2024 Most Loved Workplace ®. We are committed to creating a positive work culture that fosters growth and development while ensuring the health and safety of our employees. Why join Clean Earth? In addition to competitive pay, we also offer: • Health benefits available Day 1, • 401k available Day 1, • 10+ paid holidays/year, • Free HAZWOPER training and certification, • Overtime opportunities, • Ability to be cross-trained into different roles Job Description Environmental Technicians are the backbone of our company. You’ll be joining a team of dedicated professionals with the opportunity to learn environmental regulations and how we remove hazardous materials from the waste stream. Once trained in this role, you will consolidate, treat, store, transport and/or dispose of hazardous waste in accordance with environmentally responsible and compliant practices, policies, and procedures. This is a physically active job where you’ll be lifting and carrying up to 50 pounds throughout the day, operating a forklift and other mobile equipment to move containers to and from storage and treatment areas and to load and unload trailers. You will complete required documentation accurately, timely and legibly in accordance with applicable regulations and customer policies, practices and procedures. Starting pay $24.00 hourly Qualifications Basic requirements: • Ability to repeatedly lift and carry 50 pounds throughout the workday, • Ability to stand and walk over uneven surfaces for extended periods, • Visual acuity to read labels and documentation; depth perception to safely drive forklifts, • Ability to hear vehicle warning chimes and alarms, • Ability to work outdoors in all climate conditions and indoors in non-climate-controlled conditions, • High school diploma, • Experience in warehouse or manufacturing environment, • Basic computer skills to complete web-based training, • Ability to understand and respond to written and verbal English, • Ability to predictably and regularly attend work during scheduled hours. Must be willing and able to occasionally work nights, weekends and variable schedule(s) as necessary., • Ability to deal politely and professionally with customers and coworkers. Additional Information Clean Earth offers competitive benefits including health, dental, vision, life, and disability insurance plans starting on the first day of employment; paid time off, wellness benefits, employee discount program, tuition assistance, and a 401k with company matching. We provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, gender identity, or genetics. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. If you have a difficulty applying for any job posted on Enviri Clean Earth’s website because a disability prevents you from using the online system, Clean Earth offers the following alternate application procedure: Call toll free (833) 209-2659 and leave your name, phone number, city and state of residence. Clean Earth will arrange for an alternate method of applying and will consider your application together with all other applications received for the job. This line is dedicated to disability applications only. No other inquiries will receive a response. Military veterans encouraged to apply

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. Must be 18 or older. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description Frontier Door and Cabinet is a premier provider of interior and exterior door products and high-quality cabinets for the commercial construction industry. With over 28 years of experience, we are the leader in commercial and multi-family residential doors, cabinets, and hardware. Our commitment to excellence, transparency, integrity, and respect guides everything we do. We offer a supportive work environment where personal growth and continuous improvement are encouraged. Join us in our mission to deliver top-notch products and customer service from concept to completion. POSITION SUMMARY The Machine Operator will operate machines in the production of cabinets or doors and millwork from raw materials to finished product. This is done by the configuration of equipment, loading the machines, all the while meeting the production demands. This role will need to work the assigned shift, including any mandatory overtime. SHIFT • Monday-Friday., • 1:30 p.m. - 10:00 p.m., • Feed material through machines or “catch” material and stack them accordingly using rollers., • Follow instructions from more experienced employees to operate machines, hold or supply materials and tools, and load and unload items from machines and assembly lines., • Keep manufacturing areas free of debris., • Use of hand tools, power tools, staple gun, glue gun throughout the workday., • Set out or put away tools to keep area neat for safety., • Locate parts, tag them with identifying text and numbers, and record information such as gauge readings, products produced and manufacturing times., • Assist with quality control by reporting defective products or equipment malfunctions to higher-level employees, and if necessary, assist with any fixes., • Follow all safety requirements., • Maintain regular and reliable attendance, arrive on time for scheduled shifts, and adhere to the company’s attendance policies and procedures., • High School diploma or GED., • Minimum 3-6 months related experience and/or training., • Basic mathematics., • Proficiency in reading a tape measure., • Utilize situational awareness in detecting any deviation in the functioning of the machine., • Ability to understand read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ensuring that safety is always top priority while working. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Standing approximately 8-10 hours, 5 days a week, depending on business need, may be required to work 6 days/week depending on business need., • Fine motor abilities are needed to handle or feel objects, tools, or controls., • Specific vision abilities might be required by this job that include close vision, particularly reading that may be very fine print., • Regular twisting, bending, squatting, pushing, pivoting, and moving or lifting 10-15 pounds., • Employees will frequently lift and/or move 10-25 pounds while occasionally lift and/or move up to 50 pounds., • Exposure to moving mechanical equipment., • Exposed to vibration from machines., • Noise level is loud and ear protection is available., • Employees may be exposed to hazardous chemicals in the workplace.

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business, • Accrued PTO, • Opportunity for growth Shift Lead & Assistant Manager PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business, • Accrued PTO, • Opportunity for growth Shift Lead and Assistant Manager PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location

Job Description Precision Tune Mechanic PT01C Technician Hourly or Flat Rate Full or Part Time Pay: $27/hr - $60/hr Join the Precision Tune Auto Care Team! Celebrating 50 years as a trusted leader in automotive service and a Franchise 500 top-rated brand. At Precision Tune Auto Care, you’ll be part of a team committed to integrity, safety, and top-quality customer service. We provide total car care—from oil changes and diagnostics to engine repairs and scheduled maintenance—and we’re passionate about keeping drivers safe on the road. If you’re looking to build your career with a proven, customer-focused brand, we’d love to have you on our team. Position Summary As an Automotive Mechanic / Technician, you’ll inspect, diagnose, and repair vehicles while delivering excellent customer service. You’ll also help train and mentor team members, keep your work area safe and organized, and stay up to date on the latest automotive technologies. What We Offer: • Competitive hourly pay, • Paid Time Off (PTO) to relax and recharge, • Closed evenings and Sundays — enjoy a better work-life balance, • 5 paid holidays offWhat You’ll Do, • Diagnose and repair systems including brakes, hydraulics, exhaust, electrical, cooling, suspension, and alignment, • Perform routine maintenance services (oil changes, tire services, etc.), • Explain repair needs and technical information to customers and teammates, • Participate in ongoing training to stay current with new vehicle technologies, • Support fellow technicians with complex repairs and troubleshooting, • Maintain a clean, safe, and organized workspace, • Follow all company, safety, and environmental proceduresWhat You Bring, • High School Diploma or GED, • At least 5 years of automotive repair or mechanical experience, • Valid driver’s license and ability to pass a pre-employment drug screen, • High energy, positive attitude, and strong customer focus, • Section 609 Certification (preferred), • State Inspection License (if applicable), • Willingness to work days, nights, weekends, and holidays as neededPhysical Requirements, • Lift and carry up to 50 lbs. without assistance, • Stand, walk, bend, kneel, and reach frequently during the workday, • Safely operate vehicles and automotive tools, • Communicate effectively in person and by phone

Job Description As part of the Subway® Team, you as a Sandwich Artist ® will focus on four main things: • Providing an excellent Guest experience, • Preparing and serving great food, • Keeping restaurants clean and beautiful, • Being a Team playerKey parts of your day to day will consist of:, • Working with our Guests to knowledgeably recommend meal options and fulfill their orders from start to finish, • Upholding food safety standards as you prepare and serve fresh food daily, • Working with your teammates to keep all areas of the restaurant clean while maintaining a pleasant atmosphere for our GuestsAs a Subway® Team Member, you’ll have access to:, • Brand partnership discounts, • Scholarship Opportunities, • Opportunity to earn University course credits, • Hands on career experience in a restaurant business PREREQUISITES Education: Some high school or equivalent Experience: No previous experience required ESSENTIAL FUNCTIONS Ability to understand and implement written and verbal instruction. Physical: Ability to work any area of the restaurant as needed and to operate computerized Point of Sale system/cash register. This position requires bending, standing and walking the entire workday. Must have the ability to lift 10 pounds frequently and up to 30 pounds occasionally. *You will receive training on your roles and responsibilities Full Time/Part Time and Day/Evening/Weekend Shift positions vary by location