Electrical maintenance jobs in CardiffCreate job alerts

Electrical QA Resident Engineer - Cardiff - 1 year ++ contract Role Overview We are seeking an experienced Electrical QA Resident Engineer to provide independent and structured technical quality assurance across the electrical building services installations for a prestigious project in Cardiff. The role will provide progressive inspection and technical review throughout the construction period, with the objective of identifying non-conforming works, workmanship issues and departures from the approved project requirements at the earliest practical opportunity. The Electrical QA Resident Engineer will act as an important link between the design, quality and construction teams, ensuring that the installed electrical services reflect the approved design intent, Employer's Requirements, project specifications, technical submissions, benchmarks and applicable standards. This is a design and technically focused QA role, rather than a purely inspection or snagging position. The successful candidate must be capable of reading and understanding electrical design specifications, drawings and technical submissions and applying that knowledge when assessing installations on site. The project QA period is anticipated to run from Q3 2026 through Q2/Q3 2028, subject to the development of the project programme. Key Responsibilities Design & Technical Assurance • Review and interpret electrical design specifications, Employer's Requirements, drawings, schedules and approved construction information. • Review electrical design information and understand the intended performance and installation requirements of the systems. • Assess installed works against the latest approved construction information available within the project document management system. • Review approved technical submissions, equipment data, manufacturers' requirements and material approvals. • Verify that approved materials and equipment are being installed and that installations generally reflect the approved technical submissions. • Review benchmark installations and sample areas against the Employer's Requirements and project specifications. • Confirm alignment between approved benchmarks, specifications, drawings, technical submissions and installed works. • Identify discrepancies, omissions, non-conformances and potential quality issues at an early stage. • Provide technically informed input where installation issues arise and liaise with the design and project teams where clarification is required. • Identify issues which may affect subsequent testing, commissioning, completion or handover. • Review electrical design coordination with mechanical, public health, architectural and structural elements. Electrical Installation QA Carry out progressive site inspections of electrical building services installations, including, as applicable: • LV distribution systems • Main and sub-main distribution • Distribution boards and switchgear • Small power installations • Lighting and emergency lighting • Containment systems, including cable tray, trunking, conduit and associated supports • LV cabling and wiring systems • Earthing and bonding • Electrical plant and equipment supplies • Generator and standby power systems • UPS systems • Life safety and essential power systems • Fire alarm electrical installations and interfaces • Access control and security system interfaces • Data and containment infrastructure • BMS and controls interfaces • Specialist electrical systems • External electrical installations and associated infrastructure Inspections shall include consideration of: • Workmanship and installation quality • Compliance with approved drawings and specifications • Correct materials and equipment • Containment, supports, brackets, fixings and secondary steelwork • Cable installation, routing, segregation and identification • Terminations and connections • Equipment installation and manufacturer requirements • Accessibility and maintainability • Service identification and labelling • Earthing and bonding • Coordination with other MEP services • Fire-stopping associated with electrical penetrations • Protection of completed installations • Cleanliness and protection of electrical equipment • Readiness for testing and commissioning Progressive Inspection & Quality Control • Review Inspection and Test Plans (ITPs) and associated quality checklists within the system for completeness and compliance. • Undertake progressive inspections at appropriate stages of construction. • Inspect installations before concealment, including prior to closure of: o Ceilings o Walls o Risers o Shafts o Builders' work openings o Plantrooms o Electrical rooms o Other restricted-access areas • Identify defects and non-conforming works before they become inaccessible. • Raise and record Quality System Observations (QSOs), snagging items and other quality observations. • Establish appropriate target close-out dates and monitor progress. • Re-inspect completed works following notification from subcontractors that items are ready for inspection. • Verify close-out based on physical re-inspection and supporting evidence, rather than relying solely on subcontractor confirmation. • Provide photographic evidence and supporting records for inspections and close-out activities. • Verify that approved workmanship standards and benchmarks continue to be maintained throughout the project. Equipment & Material Verification • Review technical submittals and supporting documentation against ITP requirements and installed equipment. • Verify that approved materials, equipment and products are being installed. • Review manufacturers' installation requirements for major electrical equipment. • Confirm through site inspection that equipment has generally been installed in accordance with approved manufacturer requirements. • Verify specialist installation requirements including: o Equipment positioning o Alignment o Level and mounting o Cable entry o Terminations o Equipment clearances o Ventilation requirements o Access requirements o Maintenance requirements • Verify appropriate labelling and identification of electrical equipment, distribution boards, circuits and systems. • Verify circuit and equipment identification against approved drawings and schedules. • Check that electrical equipment and installations are suitably protected from damage, contamination and deterioration during construction. Coordination & Maintainability • Review electrical installations for appropriate coordination, accessibility and maintainability. • Confirm access is available to maintainable components including: o Distribution boards o Switchgear o Isolators o Control equipment o Lighting equipment o Emergency lighting o Electrical plant o BMS interfaces o Other maintainable components • Identify issues where services have been installed in a manner that may restrict access, maintenance or future operation. • Identify coordination issues with mechanical, public health, architectural and structural services. • Review containment routes and service coordination to ensure appropriate access and installation quality. • Identify potential issues relating to cable segregation, service clearances and accessibility. • Attend relevant MEP coordination, quality and subcontractor meetings where technical quality issues require review or resolution. Testing & Commissioning • Review electrical testing and commissioning requirements against the approved design and project specifications. • Monitor the quality and completeness of electrical testing and inspection activities. • Review relevant testing documentation and records. • Verify that testing has been undertaken in accordance with approved procedures and applicable requirements. • Identify incomplete or unacceptable testing records. • Monitor outstanding testing issues which could affect commissioning or handover. • Provide QA input into the progressive completion and commissioning of electrical systems. • Review electrical installation quality prior to energisation where appropriate. Quality Management & Reporting • Maintain an accurate and auditable record of electrical QA activities. • Maintain the electrical QA dashboard/tracker, recording: o Inspections undertaken o Open QSOs o Snagging items o Overdue actions o Closed items o Recurring defects o Trends by subcontractor o Trends by system o Trends by area • Monitor recurring defects and workmanship trends. • Identify repeated non-conformances and report areas requiring corrective action or additional quality controls. • Provide regular photographic records of inspections, defects and close-out. • Prepare regular monthly electrical QA reports summarising: o Inspections completed o Key quality concerns o Recurring defects o Outstanding QSOs o Ageing of open actions o Overdue items o Areas of concern o Risks to completion, testing, commissioning or handover • Provide timely escalation of significant quality concerns to the client. Client & Employer Inspections • Prepare a rolling two-week look-ahead programme of planned client inspections. • Coordinate client and Employer inspections with the relevant project teams and subcontractors. • Prepare inspection reports identifying observations, defects and required actions. • Coordinate inspection invitations and maintain evidence that the client/Employer was provided with the opportunity to attend. • Obtain attendance/sign-off records where required. • Maintain all relevant supporting correspondence and inspection records. • Attend and facilitate weekly site quality meetings, providing updates on: o Electrical inspections o QSOs o Defect status o Inspection progress o Outstanding and overdue actions o Client inspection sign-offs o Recurring quality issues o Risks to subsequent works o Testing and commissioning o Completion and handover Progressive Handover • Support the progressive handover of the electrical installations. • Review outstanding electrical defects and QSOs. • Re-inspect items reported as complete and verify satisfactory close-out. • Confirm that quality records are complete and auditable. • Identify outstanding issues which may present a risk to testing, commissioning, completion or handover. • Support the project team in achieving progressive completion rather than allowing quality issues to accumulate towards the end of the project. Technical Requirements The successful candidate must be able to demonstrate a strong understanding of electrical building services design and installation. They should be able to: • Read and interpret detailed electrical design drawings. • Read and understand electrical design specifications and Employer's Requirements. • Understand electrical design intent and assess whether the physical installation reflects that intent. • Review technical submissions and manufacturers' information. • Identify discrepancies between drawings, specifications, technical submissions and installed works. • Understand LV distribution and electrical building-services systems. • Understand containment systems and cable installation requirements. • Review electrical equipment, switchgear and distribution systems. • Understand lighting, emergency lighting and small power installations. • Understand earthing and bonding requirements. • Understand electrical coordination with mechanical and public health systems. • Review electrical plantroom and electrical room installations. • Assess accessibility and maintainability of electrical installations. • Identify potential issues before systems become concealed or inaccessible. • Understand requirements for electrical inspection, testing, commissioning and handover. • Identify installation issues which could adversely affect testing, energisation or system performance. • Demonstrate sound engineering judgement when assessing quality issues. Experience & Qualifications Essential • Degree, HNC/HND or equivalent qualification in Electrical Engineering, Building Services Engineering or a related discipline. • Significant experience in electrical building services. • Previous experience in either: o Electrical Design Engineering; or o Electrical QA/QC Engineering or Management with strong technical/design experience. • Proven experience reviewing electrical drawings, specifications and technical submissions. • Strong understanding of electrical building-services installation. • Experience working on major construction projects. • Experience with progressive inspection and quality assurance. • Experience raising and managing quality observations, defects or NCRs through to close-out. • Strong understanding of ITPs and inspection processes. • Ability to work independently and provide objective technical assurance. • Strong communication and reporting skills. • Excellent IT literacy. Desirable • Experience on large-scale commercial, hospitality, entertainment or mixed-use developments. • Previous experience on an arena, stadium, hotel or complex public building project. • Experience with complex LV distribution and electrical infrastructure. • Experience with generators, UPS systems and essential/standby power. • Experience with life safety systems and associated electrical interfaces. • Experience with testing and commissioning processes. • Knowledge of relevant British Standards, BS 7671, CIBSE guidance and applicable legislation. • Experience using a digital construction/quality management platforms. • Experience with BIM and digital coordination platforms. • Working knowledge of AutoCAD, Revit, Navisworks or similar software. • Relevant QA/QC or quality management qualifications. • Chartered or Incorporated Engineer status, or working towards professional registration. IT & Digital Competence The role requires a high level of IT and digital competence. The successful candidate should be comfortable working within a digital construction environment and using: • Microsoft Word • Microsoft Excel • Microsoft Outlook • PDF/drawing review software • Digital document management systems • Common Data Environments (CDEs) • BIM/3D coordination platforms Experience with AutoCAD, Revit and/or Navisworks would be advantageous. The candidate must be able to maintain accurate digital records and produce clear, professional reports and trackers. Candidate Profile The successful candidate will be a technically competent electrical engineer who can operate confidently between design documentation, site inspection and quality management. We are particularly interested in candidates from one of two backgrounds: Electrical Design Engineer An electrical design engineer who has moved into, or has an interest in, technical assurance and site-based quality, and who can apply their understanding of design intent to construction. Electrical QA/QC Engin

Mechanical QA Resident Engineer - Cardiff - 1 year contract minimum Role Overview We are seeking an experienced Mechanical QA Resident Engineer to provide independent and structured technical quality assurance across the mechanical building services installations for the prestigious project in Cardiff. The role will provide progressive inspection and technical review throughout the construction period, with the objective of identifying non-conforming works, workmanship issues and departures from the approved project requirements at the earliest practical opportunity. The Mechanical QA Resident Engineer will act as an important link between the design, quality and construction teams, ensuring that the installed mechanical services reflect the approved design intent, Employer's Requirements, project specifications, technical submissions, benchmarks and applicable standards. This is a design and technically focused QA role, rather than a purely inspection or snagging position. The successful candidate must be capable of reading and understanding mechanical design specifications, drawings and technical submissions and applying that knowledge when assessing installations on site. The project QA period is anticipated to run from Q3 2026 through Q2/Q3 2028, subject to the development of the project programme. Key Responsibilities Design & Technical Assurance • Review and interpret mechanical design specifications, Employer's Requirements, drawings, schedules and approved construction information. • Review mechanical design information and understand the intended performance and installation requirements of the systems. • Assess installed works against the latest approved construction information available within the project document management system. • Review approved technical submissions, equipment data, manufacturers' requirements and material approvals. • Verify that approved materials and equipment are being installed and that installations generally reflect the approved technical submissions. • Review benchmark installations and sample areas against the Employer's Requirements and project specifications. • Confirm alignment between approved benchmarks, specifications, drawings, technical submissions and installed works. • Identify discrepancies, omissions, non-conformances and potential quality issues at an early stage. • Provide technically informed input where installation issues arise and liaise with the design and project teams where clarification is required. • Identify issues which may affect subsequent testing, commissioning, completion or handover. Mechanical Installation QA Carry out progressive site inspections of mechanical and public health installations, including, as applicable: • HVAC and ventilation systems • Air handling units and associated systems • Chilled water and heating systems • Pumps and mechanical plant • Domestic hot and cold water systems • Above-ground drainage • Plantrooms • Mechanical equipment • Valves, controls and associated components • BMS interfaces • Mechanical supports and secondary steelwork • Pipework and ductwork • Insulation • Access and maintainability provisions • Specialist mechanical systems and equipment Inspections shall include consideration of: • Workmanship and installation quality • Compliance with approved drawings and specifications • Correct materials and equipment • Supports, brackets, fixings and secondary steelwork • Alignment, levelling and installation tolerances where applicable • Equipment installation and manufacturer requirements • Accessibility and maintainability • Service identification and labelling • Cleanliness and protection • Coordination with other MEP services • Fire-stopping associated with mechanical penetrations • Protection of completed installations • Readiness for testing and commissioning Progressive Inspection & Quality Control • Review Inspection and Test Plans (ITPs) and associated quality checklists for completeness and compliance. • Undertake progressive inspections at appropriate stages of construction. • Inspect installations before concealment, including prior to closure of: o Ceilings o Walls o Risers o Shafts o Builders' work openings o Plantrooms and other restricted-access areas • Identify defects and non-conforming works before they become inaccessible. • Raise and record Quality System Observations (QSOs), snagging items and other quality observations. • Establish appropriate target close-out dates and monitor progress. • Re-inspect completed works following notification from subcontractors that items are ready for inspection. • Verify close-out based on physical re-inspection and supporting evidence, rather than relying solely on subcontractor confirmation. • Provide photographic evidence and supporting records for inspections and close-out activities. • Verify that approved workmanship standards and benchmarks continue to be maintained throughout the project. Equipment & Material Verification • Review technical submittals and supporting documentation against ITP requirements and installed equipment. • Verify that approved materials, equipment and products are being installed. • Review manufacturers' installation requirements for major mechanical equipment. • Confirm through site inspection that equipment has generally been installed in accordance with approved manufacturer requirements. • Verify specialist installation requirements including: o Alignment o Levelling o Setting o Vibration isolation o Equipment supports o Access requirements o Maintenance requirements • Verify appropriate labelling and identification of mechanical equipment and systems. • Check that equipment and installations are suitably protected from damage, contamination and deterioration during construction. Coordination & Maintainability • Review mechanical installations for appropriate coordination, accessibility and maintainability. • Confirm access is available to maintainable components including: o Valves o Dampers o Filters o Controls o Access panels o Equipment o Other maintainable components • Identify issues where services have been installed in a manner that may restrict access, maintenance or future operation. • Identify coordination issues with electrical, architectural, structural and other MEP services. • Attend relevant MEP coordination, quality and subcontractor meetings where technical quality issues require review or resolution. Quality Management & Reporting • Maintain an accurate and auditable record of MEP QA activitieS. • Maintain the MEP QA dashboard/tracker, recording: o Inspections undertaken o Open QSOs o Snagging items o Overdue actions o Closed items o Recurring defects o Trends by subcontractor o Trends by system o Trends by area • Monitor recurring defects and workmanship trends. • Identify repeated non-conformances and report areas requiring corrective action or additional quality controls. • Provide regular photographic records of inspections, defects and close-out. • Prepare regular monthly MEP QA reports summarising: o Inspections completed o Key quality concerns o Recurring defects o Outstanding QSOs o Ageing of open actions o Overdue items o Areas of concern o Risks to completion, testing, commissioning or handover • Provide timely escalation of significant quality concerns to the client. Client & Employer Inspections • Prepare a rolling two-week look-ahead programme of planned client inspections. • Coordinate client and Employer inspections with the relevant project teams and subcontractors. • Prepare inspection reports identifying observations, defects and required actions. • Coordinate inspection invitations and maintain evidence that the client/Employer was provided with the opportunity to attend. • Obtain attendance/sign-off records where required. • Maintain all relevant supporting correspondence and inspection records. • Attend and facilitate weekly site quality meetings, providing updates on: o MEP inspections o QSOs o Defect status o Inspection progress o Outstanding and overdue actions o Client inspection sign-offs o Recurring quality issues o Risks to subsequent works o Testing and commissioning o Completion and handover Progressive Handover • Support the progressive handover of the mechanical and public health installations. • Review outstanding MEP defects and QSOs. • Re-inspect items reported as complete and verify satisfactory close-out. • Confirm that quality records are complete and auditable. • Identify outstanding issues which may present a risk to testing, commissioning, completion or handover. • Support the project team in achieving progressive completion rather than allowing quality issues to accumulate towards the end of the project. Technical Requirements The successful candidate must be able to demonstrate a strong understanding of mechanical building services design and installation. They should be able to: • Read and interpret detailed mechanical design drawings. • Read and understand mechanical design specifications and Employer's Requirements. • Understand design intent and assess whether the physical installation reflects that intent. • Review technical submissions and manufacturers' information. • Identify discrepancies between drawings, specifications, technical submissions and installed works. • Understand HVAC, ventilation, heating, chilled water, domestic water, drainage and associated mechanical systems. • Review mechanical plantroom installations. • Understand mechanical supports, brackets, fixings and secondary steelwork. • Assess accessibility and maintainability of mechanical installations. • Understand installation quality requirements for pipework, ductwork and associated equipment. • Identify potential issues before systems become concealed or inaccessible. • Understand the requirements associated with testing, commissioning and handover. • Identify installation issues which could adversely affect commissioning or system performance. • Demonstrate sound engineering judgement when assessing quality issues. Experience & Qualifications Essential • Degree, HNC/HND or equivalent qualification in Mechanical Engineering, Building Services Engineering or a related discipline. • Significant experience in mechanical building services. • Previous experience in either: o Mechanical Design Engineering; or o Mechanical QA/QC Engineering or Management with strong technical/design experience. • Proven experience reviewing mechanical drawings, specifications and technical submissions. • Strong understanding of mechanical building-services installation. • Experience working on major construction projects. • Experience with progressive inspection and quality assurance. • Experience raising and managing quality observations, defects or NCRs through to close-out. • Strong understanding of ITPs and inspection processes. • Ability to work independently and provide objective technical assurance. • Strong communication and reporting skills. • Excellent IT literacy. Desirable • Experience on large-scale commercial, hospitality, entertainment or mixed-use developments. • Previous experience on an arena, stadium, hotel or complex public building project. • Experience with complex HVAC and mechanical plant systems. • Experience with plantrooms and central mechanical services. • Knowledge of testing and commissioning processes. • Knowledge of relevant British Standards, CIBSE guidance and applicable legislation. • Experience using a digital construction/quality management platforms. • Experience with BIM and digital coordination platforms. • Working knowledge of AutoCAD, Revit, Navisworks or similar software. • Relevant QA/QC or quality management qualifications. • Chartered or Incorporated Engineer status, or working towards professional registration. IT & Digital Competence The role requires a high level of IT and digital competence. The successful candidate should be comfortable working within a digital construction environment and using: • Microsoft Word • Microsoft Excel • Microsoft Outlook • PDF/drawing review software • Digital document management systems • Common Data Environments (CDEs) • BIM/3D coordination platforms Experience with AutoCAD, Revit and/or Navisworks would be advantageous. The candidate must be able to maintain accurate digital records and produce clear, professional reports and trackers. Candidate Profile The successful candidate will be a technically competent mechanical engineer who can operate confidently between design documentation, site inspection and quality management. We are particularly interested in candidates from one of two backgrounds: Mechanical Design Engineer A mechanical design engineer who has moved into, or has an interest in, technical assurance and site-based quality, and who can apply their understanding of design intent to construction. Mechanical QA/QC Engineer or Manager An experienced mechanical QA/QC professional who has strong technical and design knowledge and is capable of reviewing specifications, drawings and technical submissions rather than simply undertaking checklist-based inspections. In either case, the individual must be able to read the design, understand the specification, inspect the installation and make a technically informed assessment of compliance. Key Personal Attributes The successful candidate will be: • Technically strong and engineering-led • Design focused rather than purely inspection focused • Thorough and detail oriented • Confident reviewing drawings and specifications • Comfortable challenging non-conforming work • Independent and objective in their approach • Proactive in identifying potential issues before they become defects • Strong in communication and stakeholder management • Organised and methodical • Comfortable working directly with subcontractors and project teams • Confident presenting quality issues at project and site meetings • Digitally and IT literate • Able to manage multiple inspections, actions and priorities • Practical and solutions focused • Focused on achieving quality progressively rather than relying on end-of-project inspection

Electrical Engineer \n 7 Steel UK - Cardiff \n Up to £52,000 plus £2,550 callout & 10% bonus \n Joining our Sections Mill team as an Electrical Engineer, you'll be working on some of the largest pieces of kit and machinery you'll find in the industry. Some of your responsibilities will include… \n ·Plan, prioritise, schedule, and manage electrical activities, for example planned maintenance programmes, shut-downs... \n \n ZIPC1_UKTJ

Roadside Technician (field-based) providing roadside assistance for a national breakdown company with over 15 million members. Great salary, benefits, overtime and bonus opportunities. Must have the right to work in the UK. Location: Cardiff Pay / salary: £36,400 OTE: OTE: In Excess of £60,000, opportunity to earn 70-80k+ Job type: Permanent / full-time role Shift and schedule for the Roadside Technician role 40 hours per week between 6am and 12am, Monday to Sunday. Shifts are known 12 months in advance. Flexi overtime at x1.5 and/or optional fixed overtime at £30 per hour. All hours start and stop from home as soon as you start the van. Benefits for the Roadside Technician role Overtime – 300 overtime hours per year equates to an extra £12,000 per annum. Bonus scheme. 23 days plus bank holidays (rising to 25 with service). Up to 6.5% matched pension contributions. Life Insurance cover up to 4x your salary. Access to a broad range of career progression opportunities and industry leading training. Colleague share scheme. Car salary sacrifice scheme – includes electric vehicle options after 12 months. Wellbeing support 24/7. Free breakdown cover for your household. Job Responsibilities for the Roadside Technician role Attend roadside breakdowns and assess vehicle faults quickly and accurately. Carry out mechanical and electrical repairs at the roadside, including battery replacements, wheel changes, and minor engine fixes. Use diagnostic tools to identify issues and determine repair options. Provide temporary solutions when full repair isn’t possible, ensuring member mobility. Advise members clearly on next steps, including recovery if needed. Work safely and efficiently in varied environments and conditions. What you’ll need to be considered for the Roadside Technician role Must have a minimum Level 2 qualification in light vehicle maintenance and repair, or ideally a Level 3 light vehicle maintenance and repair qualification (City & Guilds, IMI, NVQ, or equivalent). Must have a minimum of 2 years’ post-qualification hands-on experience with vehicles, either in a workshop or a mobile vehicle role. A customer-focused approach. Must have a full UK driving licence – max 6 points, no bans. If you would like to know more and be considered for the role, or simply want a Job Pack with more details, please apply. Consultant: Anthony Tucker – Octane Recruitment WOVT Octane Recruitment is a specialist Automotive and Motor Trade recruitment agency, working with a variety of businesses across the sector. If you would like to know more about these vacancies or any similar vacancies such as Mobile Automotive Technician, Mobile Vehicle Technician, Roadside Technician, Mobile Breakdown Technician or Mobile Mechanic roles then please get in touch

Commercial Catering Engineer Make sure to apply quickly in order to maximise your chances of being considered for an interview Read the complete job description below. £40,000 - £45,000 P.A + £12,000 Bonus + Overtime + Van + 18% Pension Full Time, Permanent Hampshire area Excellent Benefits & Career Prospects! Look no further! Our client is a market leading company that specialises in the manufacturing and supply of commercial catering equipment. The company focuses and prides themselves on creating innovative solutions for their customers which makes them the best at what they do! Covering the Hampshire area, you will be responsible for supporting the Operations Manager to deliver expected levels of service to the region's customers. You will provide technical, maintenance and repair services for a broad range of catering equipment such as dishwashers, ware-washers, ovens, mixing machines, food, and beverage preparation etc. The ideal candidate will have a commercial catering engineer background with the ability to carry out electrical fault finding and diagnostics. What's involved for the Commercial Catering Engineer To carry out repairs and servicing Planned contract maintenance and repairs Warranty checks and repairs Installation of new equipment when required To correctly diagnose faults and ensure the most effective solution. Manage van stock effectively and to order and account for spare parts as necessary. Complete all associated paperwork Use electronic timesheets on PDA device keeping an accurate log of working time, time in transit, on and offsite. Attend meetings and training courses that may be required when necessary. Maintain good customer relations and maximising sales opportunities whenever appropriate. What you'll need… Commercial catering engineer experience Relevant electrical experience (18th, 17th edition, HNC, NVQ, City and Guilds in electrics would be an advantage but not essential) Gas qualifications advantageous but not essential Fault Finding on electrical equipment is essential Must be able to read electrical wiring diagrams Benefits for the Commercial Catering Engineer Highly competitive salary Full training provided Gas and electrical qualifications paid for Enhanced company pension up to 18% combined Company van Laptop Phone Fuel card Standby Bonuses Door to door pay Monday - Friday core hours Overtime 1.3 + double time at weekends Standby weekend work 1 in 4 25 days + 8 bank holidays Life insurance Employee assistance and training programme Should this Commercial Catering Engineer position be of interest then please feel free to apply within or contact one of our representatives at 3Sixty Resourcing Ltd. Applications from outside the UK will not be considered. 3Sixty Resourcing Ltd is an independent recruitment consultancy based in Peterborough supplying permanent and contract personnel across the UK. We have a wealth of experience operating in the permanent, temporary and contract industry. xrnqpay We take pride in providing the best customer journey for our clients and candidates covering the following areas: Office, Engineering, Technical & Construction.

Electrical Craft 7 Steel UK - Cardiff £43,594.62 As an Electrical Craft in our Melt Shop, you will maintain and repair production equipment according to specification. You will also maintain detailed maintenance records and risk assessments along with conducting inspections to evaluate repair requests. Providing guidance and supervision for new entrants in the xrnqpay organisation will also be part of the ro Before applying for this role, please read the following information about this opportunity found below. Please click on the apply button to read the full job description

Apply today with your up-to-date CV to be considered for this Electrical Maintenance Technician, Electrical Technician, or Maintenance Technician opportunity in Cardiff. Electrical Maintenance Technician | Production Technician | Maintenance Technician. Acorn by Synergie is recruiting Electrical Mai

Vehicle Technician The following information provides an overview of the skills, qualities, and qualifications needed for this role. Salary: £35,000 - £45,000 (DOE) Hours: Monday to Friday Full time Benefits: Discounts on Parts, Servicing and Used Vehicles Pension Contribution Birthday off Our client, a successful and well-established automotive dealer group are seeking an experienced Vehicle Technician to join their busy workshop team. This is an excellent opportunity to join a respected automotive business that invests in its people, provides ongoing manufacturer training and offers genuine opportunities for career development. The Role As a Vehicle Technician, you will be responsible for servicing, maintaining, diagnosing and repairing vehicles to the highest standards while ensuring excellent customer satisfaction and quality workmanship. Key responsibilities include: Carrying out vehicle servicing, repairs and maintenance. Diagnosing and resolving mechanical and electrical faults. Using diagnostic equipment and technical support systems. Following manufacturer repair procedures and workshop processes. Completing accurate electronic job cards and technical reports. Ensuring all work is completed safely, efficiently and to a high standard. About You Level 3 qualification in Vehicle Maintenance & Repair (or equivalent). Previous experience working as a Vehicle Technician. Strong diagnostic and fault-finding skills. Good IT skills and confidence using digital systems. A commitment to delivering high-quality workmanship. A full UK driving licence. MOT Tester qualification would be advantageous but is not essential. What's on Offer Manufacturer training and ongoing development. Career progression opportunities within a successful automotive group. Modern workshop facilities with the latest diagnostic equipment. Supportive and professional working environment. Employee benefits including pension and staff discounts. Monday to Friday working This is a fantastic opportunity for an experienced Vehicle Technician looking to join a reputable automotive business where they can continue to develop their skills and build a long-term career, Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. xrnqpay We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.

Vehicle Technician The following information provides an overview of the skills, qualities, and qualifications needed for this role. Salary: £35,000 - £40,000 (DOE) Hours: Monday to Friday Full time Benefits: Discounts on Parts, Servicing and Used Vehicles Pension Contribution Birthday off Our client, a successful and well-established automotive dealer group are seeking an experienced Vehicle Technician to join their busy workshop team. This is an excellent opportunity to join a respected automotive business that invests in its people, provides ongoing manufacturer training and offers genuine opportunities for career development. The Role As a Vehicle Technician, you will be responsible for servicing, maintaining, diagnosing and repairing vehicles to the highest standards while ensuring excellent customer satisfaction and quality workmanship. Key responsibilities include: Carrying out vehicle servicing, repairs and maintenance. Diagnosing and resolving mechanical and electrical faults. Using diagnostic equipment and technical support systems. Following manufacturer repair procedures and workshop processes. Completing accurate electronic job cards and technical reports. Ensuring all work is completed safely, efficiently and to a high standard. About You Level 3 qualification in Vehicle Maintenance & Repair (or equivalent). Previous experience working as a Vehicle Technician. Strong diagnostic and fault-finding skills. Good IT skills and confidence using digital systems. A commitment to delivering high-quality workmanship. A full UK driving licence. MOT Tester qualification would be advantageous but is not essential. What's on Offer Manufacturer training and ongoing development. Career progression opportunities within a successful automotive group. Modern workshop facilities with the latest diagnostic equipment. Supportive and professional working environment. Employee benefits including pension and staff discounts. Monday to Friday working This is a fantastic opportunity for an experienced Vehicle Technician looking to join a reputable automotive business where they can continue to develop their skills and build a long-term career, Streamline Search is a technical recruitment agency based in Chichester, West Sussex operating across the United Kingdom. xrnqpay We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying to this post you are granting us consent to process your data and contact you in relation to this application.

Orona UK, a leader in vertical transportation, invites Mechanical or Electrical Engineers for the Cardiff area to join its Transferable Skills Programme. You’ll be trained by experienced Lift Engineers and enrolled in an NVQ level 3 course in Installation or Maintenance, depending on progress. Starting from a practical learning path, you will gain skills to operate as an independent Lift Engineer, with safety training and clear progression within a nationwide service network while developing #J-18808-Ljbffr

ORONA seeks Mechanical or Electrical Engineer trainees for Cardiff to join our Transferable Skills Programme. You will be trained by experienced Lift Engineers and the Technical Department to become an independent Lift Engineer. As progress occurs, you may enroll in an NVQ Level 3 course within Installation or Maintenance of Lifts, with comprehensive support and career development offered throughout the programme. #J-18808-Ljbffr

• Are you a Qualified Supervisor or NVQ3, AM2, 18th ed. and 2391 qualified?, • Do you have experience of Renewable technology or Commercial grade electricals?, • Are you based within a commutable distance of Cardiff? Our Client is a rapidly growing renewable energy installer based in Cardiff, delivering high‑quality solar PV, battery storage, and air‑source heat pump systems across Wales and the South West. They are seeking an experienced Qualifying Supervisor (QS) to oversee electrical compliance, ensure installation quality, and maintain accreditation standards across all renewable technologies. The QS will act as the company's technical lead for electrical safety, certification, and regulatory governance, ensuring every installation meets the highest standards of workmanship, compliance, and customer satisfaction. Technical Compliance & Governance Act as the company's Qualified Supervisor for solar PV, battery storage, EV charging, and ASHP installations. Ensure all electrical works comply with BS 7671, MCS standards, DNO requirements, Building Regulations, and RECC. Oversee and sign off electrical work, test results, commissioning sheets, and compliance documentation. Maintain and update internal technical procedures, installation standards, and quality systems. Review and approve solar PV and battery system designs, ensuring correct sizing, inverter selection, cable calculations, and protection measures. Validate ASHP electrical requirements, including load assessments, breaker sizing, and safe isolation. Provide technical guidance to surveyors, designers, and installation teams during pre‑installation assessments. Conduct on‑site audits to ensure installations meet company standards for safety, tidiness, and long‑term reliability. Ensure installations follow the correct workflow: survey, design, installation, testing, commissioning, and customer handover. Oversee safe working practices including roof access, DC/AC isolation, battery safety, and ASHP electrical integration. Mentor electricians, solar installers, and ASHP engineers. Deliver training on electrical safety, testing procedures, renewable technologies, and commissioning standards. Ensure all staff follow correct testing, inspection, and certification processes. Provide expert technical support to customers when required. Ensure customers receive accurate system performance information, monitoring app setup, and maintenance guidance. Maintain the company's reputation for clear communication, honest advice, and high‑quality service. Maintain compliance with MCS, NAPIT/NICEIC, RECC, and other accreditation bodies. Prepare documentation for audits, surveillance visits, and renewals. Manage DNO applications (G98/G99) and ensure correct submission and approval. NVQ Level 3 Electrotechnical Qualification AM2 / AM2S / AM2E 18th Edition (BS 7671) Level 3 Inspection & Testing (2391‑52 or equivalent) Experience in solar PV, battery storage, or ASHP electrical integration Strong understanding of MCS standards, electrical compliance, and renewable system safety Ability to lead teams, manage technical risk, and uphold high installation standards Experience commissioning hybrid solar‑battery systems Experience with ASHP electrical requirements and integration Knowledge of monitoring platforms such as Solis, GivEnergy, Sunsynk, Tesla Experience working with premium renewable products and long‑term performance warranties Work with a company committed to quality, compliance, and customer satisfaction Join a fast‑growing renewable energy provider expanding across Wales and the South West Influence installation standards, technical processes, and future product offerings Genuine progression into senior leadership as the business scales #J-18808-Ljbffr

Cambridge Maintenance Services is a nationwide supplier of mechanical and electrical building services maintenance with over 34 years of experience in delivering its building services maintenance to the corporate, healthcare, education, retail, transport and manufacturing sectors. It also ensures optimum energy efficiency for every property portfolio it manages. We are experts in delivering compliant, safe, and efficient workplaces. Our nationwide building services maintenance solutions span the corporate, healthcare, education, retail, transport, and manufacturing sectors. Using advanced technology and data, we provide cutting-edge maintenance services that are trusted by major managing agents and independent clients alike. As a multi-award-winning business, our local teams are dedicated to providing personalised FM services that meet your specific needs. As a key member of our Electrical maintenance team, you'll play a vital role in delivering both planned and reactive maintenance across a range of electrical systems within our client portfolio. You'll be responsible for ensuring equipment operates safely and efficiently while providing an exceptional service that consistently exceeds customer expectations. Everything you need to do the job will be provided, including a company van, mobile phone, tablet and uniform. • Deliver exceptional service to our clients, ensuring all work is completed to the highest standards and in line with contractual requirements., • Carry out planned preventative maintenance (PPM) and respond promptly to reactive maintenance and equipment breakdowns., • Diagnose and rectify faults efficiently, arranging equipment replacements where required to minimise downtime., • Complete quality inspections and ensure all work meets recognised industry standards and best practices., • Effectively manage and maintain records through our Elogbooks facilities management system., • Work closely with the Lead Engineer and Support Desk Supervisor to coordinate maintenance schedules, priorities, and reporting requirements., • Participate in the out-of-hours emergency call-out rota as required., • Undertake a variety of hands-on and physically demanding tasks across client sites., • Ensure full compliance with company policies, health & safety legislation, and relevant industry regulations., • Take ownership of your professional development by participating in training and maintaining up-to-date technical knowledge and qualifications., • Build positive working relationships with clients and colleagues, representing the business professionally at all times., • Support the wider team by undertaking additional duties appropriate to the role when required. 42.5 hours per week between Monday - Friday. Overtime starting after 47.5 hours. • Good understanding of M&E building services., • Relevant Electrical Installation qualification (e.g. City & Guilds Level 3 or equivalent)., • Inspection & Testing qualification (e.g. City & Guilds 2391-52)., • Full UK driving licence., • Strong electrical fault-finding and diagnostic skills., • Ability to interpret and analyse electrical systems., • Self-motivated with the ability to work independently and as part of a team., • Strong communication and interpersonal skills., • Methodical approach to record keeping and reporting., • Practical, hands‑on attitude with excellent problem‑solving skills., • Training in Legionella Awareness & Emergency Lighting Regulations., • City & Guilds / Plumbing / AC servicing / Gas., • 18th Edition., • LV Approved., • Annual Leave: 25 days + Bank Holidays, • Eligible roles benefit from a bonus scheme and car allowance, • Enhanced Family-Friendly Benefits, • Fertility Treatment Leave, • Pension scheme with Scottish Widows, • Salary Sacrifice Car Scheme, • Death in Service Cover, • Employee Referral Scheme, • Employee & Family 360 Wellbeing Support, • Employee of the Month Recognition Scheme, • Career development and internal mobility across the Mecsia Group Sandra will answer your questions. #J-18808-Ljbffr

Moto Hospitality is seeking a Regional Maintenance Engineer to support a cluster of sites around Cardiff. You will carry out planned and reactive maintenance, diagnose electrical and mechanical faults, and help keep sites safe, compliant and operational 24/7. Responsibilities include managing external contractors, maintaining building services, completing safety inspections and supporting longer-term infrastructure improvements across the region. #J-18808-Ljbffr

Role focuses on planned and reactive maintenance of electrical systems within the prison environment, with focus on safety, compliance and timely completion of tasks.

Hoop Recruitment Ltd is partnering with a leading housing organisation to recruit a Head of Property Services in Wales. The role delivers strategic and operational leadership across property services, with responsibility for budget, performance and customer experience. You will lead a large multi-disciplinary team, drive mechanical and electrical maintenance, gas servicing, and compliance, while shaping service delivery and digital transformation. #J-18808-Ljbffr

We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don’t worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you. In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm. • Support the Senior Service Engineer in the effective running of the Depot workshop within the region., • Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer’s specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely to affect the safe working of a machine. Notify appropriate manager of any defective or unsafe equipment., • Repair machines at depot or on site as required to ensure conformance with manufactures specification and company policy., • To complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard., • Handover machines to customers and familiarise customers with safe machine operation in accordance with company procedures., • Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required., • Accurately complete all relevant paperwork including engineer’s report, off hire, pre/delivery inspection and service sheets., • Update system on machine status change i.e. PDI carried out, Machine under repair, 6 monthly statutory Inspection completed., • Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent., • Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding., • Have a mature outlook and the ability to prioritise tasks and work well under pressure., • Understand the importance of excellent customer service. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment #J-18808-Ljbffr

Position: Vehicle Technician Location: Cardiff, South Wales Rate: £24.00 - £25.00 Per Hour (Outside IR35) We are currently looking for fully qualified Vehicle Technicians to work at our client's workshop on an ongoing contractual basis. You will be responsible for carrying out service, maintenance and repair work on a wide range of motor vehicles. The contract is outside IR35 and the rate on offer is between £24.00 - £25.00 per hour. • Qualified to Level 3 NVQ/City & Guilds or similar in the relevant disciplines., • Experience carrying out repair and service work to a variety of vehicles., • Ability to diagnose and rectify a wide range of mechanical & electrical vehicle faults., • Knowledge of health and safety practices in the workshop., • UK Driving License and possess your own tools., • Excellent written and verbal communication skills., • Ability to work as part of a productive team., • Time management and organizational skills., • Benefit from premium rates across the market., • Various long-term contract opportunities throughout the UK., • Flexible working when it comes to your hours and how far you will travel., • Experienced consultants on hand to assist with any queries at all times #J-18808-Ljbffr

Select how often (in days) to receive an alert: We are excited to offer a fantastic opportunity for an on-site Electrician in HMP Cardiff, Knox Rd, Cardiff CF24 0UG. The standard hours of work are 39 hours per week Monday - Thursday 07:30 – 16:30, Friday 07:30 – 15:30. 1 in 3 weekends with 15% uplift shift allowance. At Amey, we’re supporting our justice client, His Majesty’s Prison and Probation Service (HMPPS) by providing them with safe, clean and efficient prisons. By using our facilities management expertise, we help keep 60 secure premises across England and Wales running smoothly. The Electrician plays an important part in ensuring the planned and reactive maintenance work within the prisons is carried out in a safe, compliant and timely manner. Previous experience with planned preventative maintenance is preferred but not essential. While a Level 3 qualification is preferred, we are open to interviewing candidates with a Level 2 qualification • Ensuring Health & Safety standards are met across the contract, • Testing and inspecting electrical installations in line with current IEE wiring regulations, • Responding promptly to breakdowns, ensuring all work is carried out safely and efficiently, • Performing planned and preventative electrical maintenance and diagnosing/replacing failed domestic electrical components, • Actively fault finding and problem solving on domestic electrical systems, • Undertaking electrical installation activities according to provided designs and IET Wiring Regulations, • Monitoring and ordering critical spares for all electrical services, and oversee the BMS System, • Supporting zero carbon initiatives, contributing to sustainability goals, and handling additional tasks as directed by your line manager, • City & Guilds 2367 or 2357 Level 2 Electrical Installation works or equivalent., • BS7671 18th Edition, however, we will consider 17th Edition with upskilling to 18th Edition., • Good working knowledge of Health & Safety requirements., • Good working knowledge of planned and preventative maintenance operations., • Excellent organisational, time management and people skills., • Experience of working under pressure to tight deadlines., • Able to work at heights, to work independently and use initiative., • Understanding of fire alarm and CCTV systems, which will help you make an immediate impact. (Desirable), • Knowledge and experience of Electrical Systems and Electricity at work Regulations., • Basic IT skills. Prison Security Clearance will be required (Amey will support you through this process). At Amey, we work on long-term stable contracts so you can plan a long-term career with us. We have been awarded Platinum status by Investors in People which underscores our commitment to supporting our people across every part of our organisation, enabling them to shine. Whether you are starting your career, returning to the workplace or can bring your professional expertise and skills, there is a place for you here. Our benefits are designed to help you thrive at work and in your home life. You will have the flexibility to choose benefits and development opportunities that are best for you. • Remuneration - Enjoy a competitive annual salary with the potential for yearly reviews to ensure you’re rewarded for your contributions., • Career Growth: Shine in your career with advancement opportunities to roles like Engineering Team Leaderor Facilities Manager., • Training Opportunities: Unlock your potential with comprehensive training, including fully funded leadership programs tailored to your personal growth., • Holidays - Enjoy at least 24days of holiday plus bank holidays, and the opportunity to buy further days., • Pension - Generous pension scheme, with extra contributions from Amey., • Flexible benefits - Customise your benefits with options such as insurance benefits, Cycle2Work scheme and access to discounted gym membership., • Exclusive Discounts - Access our online portal filled with discounts from leading retailers, healthcare services, and more, helping you save on the things that matter., • Give Back to community - Two Social Impact Days each year, for volunteering and fundraising opportunities., • Family friendly policiesfor new parents or if you provide care for a dependant., • Membership of our Affinity Networkswho connect, support and inspire diverse communities within Amey. We are a leading provider of full life-cycle engineering, operations, and decarbonisation solutions, for transport infrastructure and complex facilities. Our purpose is to deliver sustainable infrastructure solutions that enhance life and protect our shared future. Every day our teams across the UK and internationally do truly important work shaping some of the most complex environments that impact generations to come. To find out more visit our website amey.co.uk/careers At Amey we constantly evolve how we work to reflect the different needs and backgrounds of our employees. We welcome applications from all suitably qualified candidates, regardless of their race, gender, disability, religion/belief, sexual orientation, or age. We believe everyone deserves an opportunity to shine. As a disability confident leader, we’re proud to guarantee applicants with a disability an interview if they meet the minimum requirements for the role. Please contact our recruitment team at to discuss any access needs, reasonable adjustments or additional support that you may require at any point during the recruitment process. #J-18808-Ljbffr

Covering sites around the Cardiff area. In this role you will be expected to work 1 weekend in 4 to 8 depending on staffing levels. Telephone support is required to our help desk and sites on technical issues as they arise. At Moto, we welcome millions of customers every year, and behind every great customer experience is a site that's safe, well-maintained and operating at its best. We're looking for a Regional Maintenance Engineer to join our Facilities team, supporting a cluster of Moto locations in the Cardiff area. This is a varied, hands‑on role where you'll help keep our sites compliant, operational and ready to welcome customers 24/7. From fault‑finding and repairs to managing contractors and supporting larger projects, you'll play a vital role in ensuring our sites remain safe, efficient and fit for the future. • Excellent bonus potential up to 15% of salary, • 25 day’s annual leave, plus bank holidays, • Company van with fuel card and full maintenance package, • Company tool kit, • Up to 60% discount for you, your partner as well as your family and friends, • Enhanced benefits, including enhanced parental leave, pension, sick pay and life assurance No two days are ever the same. You'll be: • Carrying out planned and reactive maintenance across multiple Moto locations, • Diagnosing and resolving electrical and mechanical faults, • Maintaining air conditioning, building services and site infrastructure, • Completing compliance checks, PPMs and health & safety inspections, • Managing and coordinating external contractors, • Supporting site teams with maintenance-related issues and equipment failures, • Overseeing small projects and ensuring work is delivered to Moto standards, • Providing technical expertise and practical solutions to keep sites running smoothly, • Supporting longer-term maintenance planning and infrastructure improvements across the region We're looking for someone who enjoys getting stuck in, takes pride in solving problems and thrives in a fast‑paced environment. • Experience within facilities, building services or maintenance engineering, • A recognised trade qualification in electrical, engineering, plumbing or a related discipline, • Experience working with electrical equipment, • Strong fault-finding and diagnostic skills, • Knowledge across a range of building maintenance disciplines, • Experience managing contractors and external service providers, • A practical, proactive approach and the ability to work independently, • Good IT skills and administration capability Most importantly, you'll be someone who builds great relationships, communicates well and genuinely cares about delivering excellent service At Moto, we're passionate about creating better journeys for our customers and better opportunities for our people. This is more than a maintenance role. It's an opportunity to make a visible difference every day, working across a diverse estate, solving real problems, and helping keep the UK's largest motorway service network running smoothly. If you're a multi‑skilled engineer who takes pride in doing a great job and wants to be part of a supportive team, we'd love to hear from you. INDCS #J-18808-Ljbffr

• Location: Cardiff (United Kingdom), • Contract: Permanent, • Working day: Full time, • Sector: Engineering and automotive, • Vacancies: 1, • Discipline: Technical, • Work modality: On site Orona UK Orona is a leading European business group in sustainable vertical transportation. As a global operator with almost 60 years’ experience, it delivers value for customers through its platform of products and services covering the design, manufacture, installation, maintenance, modernization, refurbishment and replacement of lifts and escalators in all market segments. Its vertical transportation solutions encompass innovative, pragmatic and state-of-the-art technologies; giving the highest level of safety, and optimises traffic management, available space, and travel comfort. Our cooperative business model is committed to people. Its team is composed of 5,700 employees, operating in 12 European countries, supplying complete lifts, escalators, and components to more than 100 countries throughout the world. Orona in the UK provides a national installation and service coverage from its regional offices. Nearly 300 full time employees make up the UK team, providing a wealth of skill, knowledge and local market experience. 1 out of every 10 new lifts in Europe is an Orona lift. 100 countries have Orona products installed. 300,000 lifts worldwide with Orona technology. 25,000,000 We bring more than 25 million people every day to their destination. Number 1 in production capacity in Europe for complete lifts. 1st company in the sector worldwide certified in Ecodesign - ISO 14006. More information at www.orona.co.uk At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. We have an opportunity for candidates with Mechanical/Electrical Engineering backgrounds to join our growing organisation. We are looking for Mechanical or Electrical Engineers for our Cardiff area, who are looking for the first or next step in their career, Orona's Transferable Skills Programme will help you to gain the knowledge and experience to work as an independent Lift Engineer. You will be trained by our experienced Lift Engineers and Technical Department to learn and understand the company and requirements of our industry. Depending on your learning progress, you will then be enrolled for the NVQ level 3 course within either the Installation or Maintenance of Lifts. • Mechanical or Electrical background demonstrated either through Education or through recent work experience, • Ideally possess one of the following, • Level 2 Foundation Course in Mechanical/Electrical Engineering,, • Level 2 Performing Engineering Operations, • BTEC Level 3 Diploma in Electrical, Electronic, Mechanical Engineering, • The ability to follow instructions and ensuring safety guidelines are followed at all time, • Demonstrate a willingness to develop and learn new skills., • Clean UK driving licence. We offer more than just a job — we offer long-term career development within a stable and growing company. • Attractive Salary: Competitive pay that reflects your skills and experience, • Generous Holiday Allowance: Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays, • Secure Future: Benefit from a pension scheme with increasing company contributions as you grow with us, • Peace of Mind: Life Inssurance to support you and your loved ones, • Health & Wellbeing: Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services, • Family-Friendly Benefits: Enhanced leave for family-related events and emergencies, • Support When You Need It: Employee Assistance Programme offering confidential support for personal and work-related challenges, • Eye Care: Eyecare vouchers to help keep your vision sharp, • Recognition for Longevity: Long Service Awards to celebrate your milestones with us, • Referral Rewards: Earn a Recruitment Referral Fee by helping us find top talent, • Continuous Growth: Ongoing Training & Development opportunities to support your career journey, • Clean UK driving licence., • Must be eligible to work in the UK #J-18808-Ljbffr

At Mitie, our people are our greatest strength, and our promise is to create a place to work where you can thrive and be your best every day. We are looking for an experienced Building Fabric Engineer to work closely with the Management team onsite who will be delivering the building fabric services. • Delivering basic plumbing, ceiling repairs, carpet fitting, fitting door closers, roof and gutter cleaning, emergency light testing, painting and basic carpentry skills., • Customer care/relationship building skills are essential in order to communicate with both internal and external clients., • Carry out minor mechanical/electrical repairs and planned preventative maintenance (PPMs)., • You will be required to supervise trainees and technicians where advised and will be communicating with departmental management to ensure resource requirements are clearly understood. Experience in facilities management or building services. • The ideal candidate should be qualified in a Building Services discipline., • Plumbing experience., • Flexible lifestyle benefits through our Choices platform, including extra holidays, insurance, dental care, and tech products. #J-18808-Ljbffr

Hunter Selection is recruiting an Electrical Inspector to join and lead a well-established maintenance team for a global manufacturer with multiple sites. The role focuses on preventive and predictive maintenance, ensuring safe, efficient routine work and high-quality asset management. Training and internal development opportunities are available as part of a stable career path. The ideal candidate has NVQ Level 3 or an HNC in Mechanical Engineering, with experience in maintenance programs and #J-18808-Ljbffr

Venatu Automotive Group are recruiting on behalf of our client for Permanent Mobile Support Engineers. • Permanent, full-time positions, • Realistic OTE of £55,000-£60,000+, • 38-hour working week, • Overtime available after contracted hours, • Monday to Friday working pattern, • Company van provided, • Paid from the moment you leave home until you return home, • Excellent support network As a Mobile Support Engineer, you'll carry out servicing, maintenance, diagnostics, repairs, and breakdown support on Bus & Coach / PSV vehicles, ensuring customers receive a first-class service while working independently in the field. • NVQ Level 3 / City & Guilds in Heavy Vehicle, PSV Engineering or equivalent, • Previous Bus & Coach / PSV engineering experience, • Strong mechanical, electrical and diagnostic fault-finding skills, • Full UK Driving Licence, • Excellent customer service and communication skills, • Ability to work independently and manage your own workload Your privacy matters to us. By applying for this role, your details will be added to our recruitment system, allowing us to contact you regarding this vacancy and other suitable opportunities. For more information, please refer to our Privacy Policy on the Venatu Automotive Group website. #J-18808-Ljbffr

Planning Engineer 7 Steel UK - Cardiff Up to £45,000 plus 10% bonus Joining our Rod and Bar Mill Team as a Planning Engineer, you will be taking on a varied and exciting role. You will be responsible for developing, communicating and maintaining maintenance plans and schedules, that balance maintenance requirements, production priorities, and resources, all whilst prioritising safety. Some of your key responsibilities will include: Develop, maintain and continuously improve SAP PM maintenance planning and scheduling processes. Facilitate weekly maintenance planning and scheduling meetings with Maintenance and Production teams. Develop weekly maintenance schedules based on preventive, predictive and corrective maintenance requirements whilst optimizing the use of available resources. Coordinate planned shutdowns and major maintenance activities to ensure efficient execution and minimal production disruption. Work in a safe manner and actively promote a positive Health, Safety and Environmental culture throughout the site. Participate in risk assessments and support the development of maintenance procedures and safe systems of work. You will be experienced in maintenance planning and scheduling, and ideally, you will have a background in the steel industry. However, what is most important to us is your strong communication, organisational and problem-solving skills. Your analytical mindset will support you to adapt and overcome challenges in our fast-paced rolling mill. To be eligible for this opportunity, you will need a BSc in Electrical or Mechanical Engineering (minimum). Some of our benefits include… · Healthcare cash plan: Claim back money towards the cost of your essential healthcare and receive access to valuable health and wellbeing services. · Pension: We contribute 5% of your salary towards your pension. · Life assurance: Group Life assurance to provide your family with financial and bereavement support. · Rewards : Discount and rewards from hundreds of retailers, restaurants and destinations. You can choose from one-off vouchers, reloadable discount cards, discount codes or receive cashback. · Gym Discounts : Get access to discounted gym memberships, online subscriptions, retail discounts, food & drink as well as health experiences. · Holidays : You will receive 25 days paid annual leave plus bank holidays. · Cycle to Work Scheme : Save money on bikes and biking accessories through the Cycle to Work Scheme. · Electric Car Scheme : Save up to 40% on the cost of an electric car by paying for it through salary sacrifice. · MyMindPal : Access to MyMindPal to support your individual mental health fitness. · Free on-site parking: We have free parking all across our sites. You'll be joining a recycling company – we recycle scrap metal into new steel products. We're the largest producer of reinforcing steel in the UK and one of the largest metal recyclers, too. We're passionate about the circular economy and working towards our decarbonisation pathway. Sound interesting? Click the link below to apply. We are committed to fostering a diverse and inclusive workplace, where all employees are valued and respected. We encourage individuals from all backgrounds to apply and join our team, as we believe that embracing different perspectives and experiences will strengthen our workforce and drive innovation in the steel industry. We are dedicated to providing a safe and secure environment for all employees, ensuring that safety standards are consistently upheld in every aspect of our operations. Please let us know if you need any reasonable adjustments throughout the recruitment process. If you have any questions about the role or process, please get in touch with our Talent Team. TPBN1_UKTJ

Mobile Vehicle Engineer Your day starts when you start your vehicle. Are you an experienced HGV Technician looking for a mobile role where no two days are the same? We are looking for a self-motivated and independent Mobile Fleet Engineer to support a network of customer sites across the South West. You will travel to customer workshops and rural sites carrying out servicing, repairs, and maintenance across a wide range of specialist vehicles and equipment. The equipment you will work on includes: HGVs Ground Support Equipment (GSE) RoRo (Roll-on Roll-off) equipment Tractors and Tugs Shunters Cherry Pickers Other specialist/ bespoke operating platforms Key Responsibilities Attending vehicle callouts Carrying out preventative maintenance Responding to emergency breakdowns Pre-arranged servicing at customer and rural sites MOT preparation Engine work and diagnostic investigations Rectifying running defects Chassis and fabrication work Working with hydraulic and pneumatic systems Improving vehicle standards and reliability Electrical and wiring inspections and repairs Coverage Area You will be covering the following locations: South Bristol Bath Frome Weston-super-Mare Glastonbury About You We are looking for someone with a strong technical background and the ability to work independently while representing the company professionally on customer sites. You should be: Reliable and punctual Enthusiastic and proactive A strong problem solver with a can-do attitude Committed to health and safety standards Comfortable working independently in a mobile role You must have a strong understanding of modern vehicle technology and be able to manage the repair process from fault diagnosis through to completion. Requirements Fully qualified Commercial Vehicle Technician or completion of a recognised Apprenticeship Experience working with HGVs or commercial vehicles Class 2 (Category C) licence – beneficial but not essential Training & Development The industry is evolving rapidly with the introduction of electric and hydrogen vehicles. Training will be provided on the latest products, systems, and repair techniques where required. Benefits Company van provided (expensed) 20 days annual leave plus bank holidays Company pension scheme Private healthcare scheme Ongoing training and development About Kautec Recruitment Kautec Recruitment is a growing automotive recruitment specialist connecting skilled technicians with leading employers across the industry. If this role isn't the right fit but you are considering a move, we would still love to hear from you. Keywords: HGV, Heavy Goods Vehicle, Commercial Vehicle, RCV, Refuse Collection Vehicle, Tipper, Sweeper, Gritter, Mechanic, Vehicle Engineer, Vehicle Technician, Fitter, Workshop TPBN1_UKTJ

£46,000 - £54,000 + benefits | Bala, North Wales Ready to keep production moving, solve problems fast and make a real difference? We’re looking for an experienced, multi-skilled Shift Maintenance Engineer to join our Engineering team in Bala, North Wales. This is a hands‑on role where you’ll play a vital part in keeping our factory running safely, efficiently and reliably. From responding to breakdowns and delivering planned maintenance to driving improvements across machinery, hygiene, quality and performance — no two shifts will be the same. • Respond quickly and effectively to breakdowns, minimising equipment downtime., • Carry out reactive, proactive and planned preventative maintenance (PPM) across the site., • Diagnose faults and repair plant and machinery, both independently and as part of a team., • Drive improvements in plant uptime, OEE and engineering performance., • Support new machinery and wider site improvement projects., • Maintain high standards of Health & Safety, Food Safety and GMP., • Work closely with Production and external contractors to keep operations running smoothly., • Maintain engineering records, complete work orders and support engineering stock control., • Contribute to production meetings and promote strong communication across Engineering and Production., • Learn new skills and share your knowledge with colleagues. The role requires flexibility around production needs and involves working 12‑hour day or night shifts, including weekends on a shift rotation pattern. • At least 3 years’ engineering experience., • A formal NVQ Level 3 or higher engineering qualification in an electrical or mechanical discipline., • A recognised engineering apprenticeship., • 17th or 18th Edition certification., • Strong fault-finding and breakdown experience., • The ability to read and understand electrical and mechanical drawings/manuals., • Excellent communication and decision‑making skills., • A flexible, logical and hands‑on approach., • The confidence to work independently while also being a strong team player., • Computer literacy, including experience with MS Office and a PPM system., • A positive will‑do attitude and a logical and inquisitive approach to problem solving. Food industry experience is essential, while experience within a bakery environment would be particularly advantageous. Experience with equipment such as metal detectors, mixers, depositors, sonic cutters, labelling machines, conveyers and flow wrappers would also be a plus. This is an opportunity to become a key part of a busy Engineering team, with genuine scope to solve problems, improve performance and make an impact. If you’re an engineer who takes pride in keeping machinery running, enjoys the challenge of fault finding and wants to be part of a team focused on continuous improvement, we’d love to hear from you. Location: Bala, North Wales Salary: £46,000 - £54,000 Hours: 12‑hour shifts - days/nights, including weekends Role: Shift Engineer #J-18808-Ljbffr

be ensuring the final electrical outputs meet all stringent technical, regulatory, and commercial expectations. This role is perfectly suited for an experienced engineer with essential knowledge of UK Connection of Utility-Scale Renewables, ready to take ownership by designing and approving complex systems and working collaboratively with internal teams (procurement, site) and external stakeholders. Key Responsibilities: • Lead the design and coordination of LV, MV, and HV electrical systems for solar PV and BESS projects (up to 132kV). Oversee the preparation of detailed designs including cable routing, SLDs, protection schemes, grounding, and earthing systems. Define technical specifications for key components: inverters, transformers, switchgear, batteries, and SCADA. Perform load flow, fault level, and protection coordination studies using software such as DIgSILENT or ETAP. Ensure designs meet DNO/DSO and National Grid compliance (G99, G100), IEC/BS standards, and INTEC internal quality benchmarks. Support the preparation and review of tender packages, BoQs, and technical evaluations. Act as technical lead in client, contractor, and DNO/TNO interface meetings. Assist with site installation supervision, FAT/SAT activities, and technical commissioning when needed. Collaborate with civil, structural, and mechanical teams to integrate multidisciplinary project aspects. Mentor junior electrical engineers and review their deliverables for quality and compliance. Qualifications: 7+ years of experience in utility-scale solar PV and/or BESS project design and delivery. Strong knowledge of UK grid codes (G99, G100), BS/IEC standards, and HV design principles. Proficiency in AutoCAD, ETAP, DIgSILENT, or similar engineering tools. Familiarity with EPC project phases: pre-construction, procurement, installation, and commissioning. Bachelor's or Master's degree in Electrical Engineering (Chartered Engineer status is an advantage)., • Excellent communication and coordination skills, with experience liaising with DNOs, clients, and subcontractors., • Able to manage multiple projects simultaneously in a fast-paced environment. Full right to work in the UK and willingness to travel to sites or office locations. A passion for sustainability and environmental solutions., • Company Values: Customer Orientation: We strive for the highest standards in all our projects and services, ensuring our clients receive the best possible solutions tailored to our needs. Innovation: We embrace new technologies and creative solutions to drive progress in the renewable energy sector, constantly seeking ways to improve and innovate. Adaptability: We are dedicated to creating eco-friendly solutions that minimize environmental impact, adapting to new challenges and opportunities in the industry. Integrity: We conduct our business with honesty, transparency, and respect for all stakeholders, maintaining the, • About Us: INTEC Energy Solutions offers its valued customers best-in-class Engineering, Procurement, Construction (EPC), Development, Consultancy, Operations & Maintenance services, and new energy solutions. INTEC excels in creating and developing top-tier, turnkey solar power plants and BESS solutions worldwide, embodying a commitment to excellence and sustainability. With the expertise of a global workforce, INTEC is establishing itself as a leading player, executing over 180 projects globally and achieving a significant installed and secured capacity of over 3.9 GWp. We maintain an active presence across Europe, APAC, the Middle East, Africa, and Türkiye., • Job Description: Summary: As the Electrical Engineer for utility-scale solar and Battery Energy Storage System (BESS) projects in the UK, you will be the driving force behind the entire electrical design, moving projects seamlessly across the feasibility, conceptual, detailed, and construction stages. Your core responsibility will, • highest ethical standards., • Sustainability: We believe in the power of teamwork and partnerships to achieve common goals, fostering a collaborative environment that promotes sustainable practices. Reliability: We are committed to delivering consistent, dependable results, ensuring our projects are completed on time and to the highest quality standards., • What We Offer: Competitive salary package. 28 Annual Leave Days (excluding Bank Holidays) Opportunity to rapidly growing and leading global company in the renewable energy sector. A dynamic and collaborative work environment. Professional development and career growth opportunities. The chance to make a significant impact on the future of clean energy. We are an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Applicants from all backgrounds are encouraged to apply, as we value unique perspectives and experiences that contribute to our vibrant workplace. Join us at INTEC Energy Solutions and be part of a transformative era where we redefine energy for future generations. Together, we can create a sustainable and eco-friendly future #J-18808-Ljbffr

Electrician - South WalesJoin DALE Building Maintenance and Build Your Future With Us Location: South Wales Want to apply Read all the information about this position below, then hit the apply button. Job Type: Full Time, Permanent Salary: Excellent package with overtime opportunities, company vehicle and benefits Why Join DALE? xrnqpay At DALE Building Maintenance Ltd, we're more than just a maintenance company. We are a well-established, growing business with a proud history dating back to 1986, del Please click on the apply button to read the full job description

Role: Building Fabric Engineer Hours: 40 hrs/week Location: Cardiff, CF15 7YJ At Mitie, our people are our greatest strength, and our promise is to create a place to work where you can thrive and be your best every day. We are looking for an experienced Building Fabric Engineer to work closely with the Management team onsite who will be delivering the building fabric services. • Delivering basic plumbing, ceiling repairs, carpet fitting, fitting door closers, roof and gutter cleaning, emergency light testing, painting and basic carpentry skills., • Customer care/relationship building skills are essential in order to communicate with both internal and external clients., • Carry out minor mechanical/electrical repairs and planned preventative maintenance (PPMs)., • You will be required to supervise trainees and technicians where advised and will be communicating with departmental management to ensure resource requirements are clearly understood., • Experience in facilities management or building services., • The ideal candidate should be qualified in a Building Services discipline., • Plumbing experience., • Access to a virtual GP for you and your household., • Financial wellbeing support via Salary Finance, including early pay access and competitive loans., • Flexible lifestyle benefits through our Choices platform, including extra holidays, insurance, dental care, and tech products. #J-18808-Ljbffr

At the forefront of the fight to secure a resilient, low-carbon energy system, Ofgem is strengthening how we oversee the health of Britain’s electricity networks. We’re looking for two Senior Engineers – Electrical to join us and play a leading role in building and delivering a new Asset Health Inspectorate that will provide expert assurance across licensed energy companies. Ofgem is Great Britain’s independent energy regulator. We’re at the forefront of change across the energy sector, driving toward Net Zero whilst protecting energy consumers, especially vulnerable people. With an excellent benefits package and opportunities for flexible and hybrid working, we’re offering two permanent opportunities within our Engineering & Technology directorate at an exciting point of growth and transformation. You’ll join a newly created Asset Health & Network Resilience team, shaping how we oversee infrastructure performance, resilience and long-term asset stewardship across the sector. This is a rare opportunity to combine deep technical expertise with national regulatory impact. Operating across engineering and regulation, you’ll provide authoritative insight that strengthens our technical capability. You’ll contribute to the evolution of asset health frameworks, standards and risk metrics, while supporting the establishment and operation of a formal Asset Health Inspectorate. You’ll also have the opportunity to engage widely across the sector, supporting resilience-related investigations, contributing to climate resilience considerations, and promoting best practice in asset management. We’re looking for candidates with strong experience in electrical asset management within electricity transmission or distribution networks, alongside a deep technical understanding of asset health, lifecycle and infrastructure resilience. You’ll bring credible engineering expertise, clear communication skills and the ability to translate complex technical issues for non-technical audiences. A relevant engineering degree and professional qualification will underpin your capability. • Provide authoritative insight to strengthen technical capability in asset health, lifecycle and resilience across electricity transmission and distribution networks., • Contribute to the evolution of asset health frameworks, standards and risk metrics., • Support the establishment and operation of a formal Asset Health Inspectorate., • Engage across the sector to support resilience-related investigations and climate resilience considerations, promoting best practice in asset management., • Translate complex technical issues for non-technical audiences and provide clear, consultative guidance., • Experience in an engineering role relevant to asset management associated with electricity transmission and distribution networks., • Technical knowledge and experience of electrical asset health, lifecycle, degradation and ability to assess infrastructure performance and resilience., • Relevant experience in one of the following areas: Electricity transmission or distribution policies, design, build, operation or maintenance., • Excellent communication/interpersonal skills including report writing and the ability to explain technical issues to non-technical audiences., • Educated to degree level in a relevant engineering discipline or equivalent industry experience. Engineering capability evidenced through an appropriate professional qualification – chartered status or working towards it., • Changing and Improving, • Communicating and Influencing, • Working Together, • Delivering at Pace #J-18808-Ljbffr

Cambridge Maintenance Services is a nationwide supplier of mechanical and electrical building services maintenance with over 34 years of experience in delivering its building services maintenance to the corporate, healthcare, education, retail, transport and manufacturing sectors. It also ensures optimum energy efficiency for every property portfolio it manages. We are experts in delivering compliant, safe, and efficient workplaces. Our nationwide building services maintenance solutions span the corporate, healthcare, education, retail, transport, and manufacturing sectors. Using advanced technology and data, we provide cutting-edge maintenance services that are trusted by major managing agents and independent clients alike. As a multi-award-winning business, our local teams are dedicated to providing personalised FM services that meet your specific needs. As a key member of our Electrical maintenance team, you'll play a vital role in delivering both planned and reactive maintenance across a range of electrical systems within our client portfolio. You'll be responsible for ensuring equipment operates safely and efficiently while providing an exceptional service that consistently exceeds customer expectations. Everything you need to do the job will be provided, including a company van, mobile phone, tablet and uniform. Deliver exceptional service to our clients, ensuring all work is completed to the highest standards and in line with contractual requirements. Carry out planned preventative maintenance (PPM) and respond promptly to reactive maintenance and equipment breakdowns. Diagnose and rectify faults efficiently, arranging equipment replacements where required to minimise downtime. Complete quality inspections and ensure all work meets recognised industry standards and best practices. Effectively manage and maintain records through our Elogbooks facilities management system. Work closely with the Lead Engineer and Support Desk Supervisor to coordinate maintenance schedules, priorities, and reporting requirements. Participate in the out-of-hours emergency call-out rota as required. Undertake a variety of hands-on and physically demanding tasks across client sites. Ensure full compliance with company policies, health & safety legislation, and relevant industry regulations. Take ownership of your professional development by participating in training and maintaining up-to-date technical knowledge and qualifications. Build positive working relationships with clients and colleagues, representing the business professionally at all times. Support the wider team by undertaking additional duties appropriate to the role when required. Cardiff. 42.5 hours per week between Monday - Friday. Overtime starting after 47.5 hours. Good understanding of M&E building services. Relevant Electrical Installation qualification (e.g. City & Guilds Level 3 or equivalent). Inspection & Testing qualification (e.g. City & Guilds 2391-52). Full UK driving licence. Strong electrical fault-finding and diagnostic skills. Ability to interpret and analyse electrical systems. Self-motivated with the ability to work independently and as part of a team. Strong communication and interpersonal skills. Methodical approach to record keeping and reporting. Practical, hands-on attitude with excellent problem-solving skills. City & Guilds / Plumbing / AC servicing / Gas. 18th Edition. LV Approved. Eligible roles benefit from a bonus scheme and car allowance Enhanced Family-Friendly Benefits Fertility Treatment Leave Pension scheme with Scottish Widows Salary Sacrifice Car Scheme Death in Service Cover Employee Referral Scheme Employee & Family 360 Wellbeing Support Employee of the Month Recognition Scheme Career development and internal mobility across the Mecsia Group #J-18808-Ljbffr

7 Steel UK is seeking a Senior Electrical Engineer to join the Rod and Bar Mill Team. You will split time between offices and the plant, coordinating electrical activities, maintenance, and safety-driven practices to keep the mill running smoothly. You will bring a degree in Electrical Engineering (BSc minimum) and extensive experience in electrical or automation engineering, preferably in a hot rolling mill. #J-18808-Ljbffr

Location: Cardiff Salary: Circa £55,000 + 10% Bonus Hours: Monday – Friday An exciting opportunity has arisen for an experienced Senior Manufacturing Engineer to join a leading and well‑established manufacturing business based in Cardiff. With continued investment, growth and the introduction of new technology across the site, the business is looking to strengthen its engineering team with a hands‑on Senior Manufacturing Engineer who can support both existing operations and future improvement projects. Working closely with Engineering, Production and Operations, you will play a key role in improving manufacturing processes, introducing new and automated equipment, troubleshooting technical issues and driving improvements across safety, quality, efficiency and reliability. • Support the introduction, installation and commissioning of new manufacturing equipment and technology., • Drive improvements across manufacturing processes, equipment performance, OEE and efficiency., • Provide hands‑on engineering support and technical problem‑solving across the site., • Support automation, digitalisation and process improvement projects., • Work cross‑functionally with Production, Maintenance, Quality and wider Engineering teams., • Lead root cause analysis and implement sustainable corrective actions., • Identify opportunities for Continuous Improvement and support the delivery of site investment projects., • Experienced Manufacturing Engineer, Production Engineer, Process Engineer or similar within a fast‑paced manufacturing environment., • Strong hands‑on engineering and problem‑solving capability., • Experience working with automated manufacturing equipment and production machinery., • Electrical qualifications or a strong electrical engineering background would be highly advantageous., • Exposure to equipment installation, commissioning, process optimisation or CAPEX projects., • Comfortable working closely with production teams in a hands‑on manufacturing environment., • Continuous Improvement / Lean Manufacturing experience would be beneficial. This is a fantastic opportunity to join a growing manufacturing business at an exciting stage of its development, with significant investment being made across the Cardiff site. #J-18808-Ljbffr

Location: Cardiff Depot Salary: Competitive At McHale Komatsu, we're proud to be one of the UK's leading construction equipment distributors, representing one of the world's most respected machinery brands. We supply innovative equipment, including Intelligent Machine Control (iMC) technology and Hybrid Excavators, helping our customers work smarter and more efficiently. As our business continues to grow, we're looking for talented people who take pride in their work and want to build a long-term career with a company that invests in its people. Join a supportive team, work with industry-leading equipment and play a key role in delivering outstanding service to our customers. We're looking for an experienced Workshop Engineer to join our Cardiff Depot. Working within our workshop, you'll be responsible for servicing, maintaining and repairing a wide range of construction equipment, as well as preparing new and used machines ready for delivery. You'll carry out inspections, diagnostics, repairs and pre-delivery inspections, ensuring every machine leaves the workshop to the highest standard. Working alongside an experienced team, you'll have access to quality tooling, ongoing training and the opportunity to further develop your technical skills while working with some of the industry's leading equipment. • Service, maintain and repair Komatsu and other construction equipment., • Complete pre-delivery inspections (PDIs) and machine modifications., • Diagnose faults across mechanical, hydraulic and electrical systems., • Carry out repairs, overhauls and component rebuilds., • Complete post-repair testing and inspections to ensure machines meet performance standards., • Identify and order parts required for repairs., • Complete all service documentation accurately and on time., • Maintain a clean, organised and safe workshop environment., • NVQ Level 2 or 3 in Plant Maintenance or an equivalent engineering qualification., • Experience working on heavy plant or construction equipment., • Good knowledge of mechanical, hydraulic and electrical systems., • Experience using workshop equipment and tooling., • Welding and oxy-acetylene experience would be advantageous., • Strong fault-finding and diagnostic skills., • A proactive approach with high standards of workmanship and attention to detail., • Good communication and IT skills., • Competitive salary., • Company pension scheme., • Up to 27 days annual leave (linked to service), plus bank holidays and Christmas shutdown., • Ongoing manufacturer training and professional development., • Support and mentoring from experienced colleagues and senior managers., • Genuine opportunities for career progression., • The opportunity to work with industry-leading equipment in a supportive team environment. If you're an experienced Workshop Engineer looking to develop your career with a respected and growing business, we'd love to hear from you! #J-18808-Ljbffr

At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. Our Civil Nuclear team supports the full nuclear lifecycle, delivering infrastructure for major new build programmes, emerging SMR and AMR technologies, defence nuclear facilities, and decommissioning and waste management projects. These nationally significant programmes contribute to the UK's energy security, national resilience, net‑zero ambitions, and the safe stewardship of its nuclear legacy. As part of a multidisciplinary team, you'll work alongside experts in civil, structural, geotechnical, environmental, process and energy engineering to solve complex infrastructure challenges. You'll contribute to projects from early feasibility and concept development through to detailed design and delivery, helping deliver infrastructure that supports clean energy, national security, and the long-term management of the UK's nuclear estate. Backed by the expertise and resources of over 12,500 colleagues across the UK, you'll have the opportunity to work on nationally significant programmes while developing your technical skills, broadening your experience and building your career within one of the UK's fastest-growing sectors. • Deliver and review civil engineering designs that support projects throughout the nuclear asset lifecycle, including new build, operations, asset care and maintenance, life extension, and decommissioning,, • Play a key role in developing civil engineering solutions for major nuclear infrastructure projects, including site development, roads and access infrastructure, drainage, earthworks, utility networks and reinforced concrete structures., • Undertake feasibility studies, optioneering, site assessments and concept design activities to inform project development and investment decisions., • Work collaboratively within multidisciplinary teams to develop safe, efficient and innovative engineering solutions within highly regulated environments., • Support the integration of civil engineering designs with wider structural, mechanical, electrical and process engineering requirements., • Prepare and review technical reports, specifications, calculations and health and safety documentation., • Apply relevant standards, procedures and quality requirements within highly regulated environments., • Assist with project planning, design coordination and the successful delivery of projects to programme and budget., • Build strong relationships with clients, stakeholders and delivery partners across the nuclear and defence sectors., • Support the development of graduate and early career engineers., • Contribute to the continued growth, technical excellence and reputation of WSP's Civil Nuclear capability., • Degree qualified in Civil Engineering or a related discipline., • Chartered Engineer (CEng MICE) or working towards professional chartership., • Experience delivering civil engineering projects throughout the nuclear asset lifecycle, including new build, operations, asset care and maintenance, life extension, decommissioning, waste management and environmental remediation, with an understanding of UK nuclear programmes, including SMRs, AMRs and associated infrastructure., • Experience in the design and delivery of civil engineering solutions, including site development, earthworks, drainage, highways, utilities and reinforced concrete and steel structures., • Good understanding of relevant design codes and standards including British Standards, Eurocodes, and nuclear-specific standards, • Experience undertaking feasibility studies, optioneering, concept design and detailed design activities., • Ability to work effectively within multidisciplinary teams and coordinate interfaces across complex engineering projects., • Understanding of design risk management, CDM regulations and the application of health and safety principles throughout the project lifecycle., • Good technical report writing, analytical and problem-solving skills. Work on landmark projects around the world and embrace opportunities to make an even bigger impact in the communities you care about. What if you could do the best work of your life and create a legacy for yourself? We are one of the world’s leading engineering and professional services firms. Our passionate people are united by the common purpose of creating positive, long-lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 11,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. At WSP, we understand that work is just one aspect of your life. It’s important to make time for you, your family, friends, interests and your community. Our hybrid working policy offers the flexibility to work from home two days a week, while also providing opportunities to collaborate in our modern offices across the UK. We welcome applicants with varied backgrounds and experiences. We enable rewarding careers by encouraging people to bring their whole and authentic selves to work so that our work represents the fullest spectrum of society. We celebrate integrity and treat people with respect, supporting each other and embracing a culture of inclusion and belonging at WSP. We have our employee resource groups bring together employees and allies with different backgrounds to promote a culture of inclusivity. We are committed to supporting our people, giving you the tools to make improvements to your health and wellbeing through our Thrive programme. Our Virtual GP service gives you access to an NHS or Irish Medical Council GP at a time and place that suits you – giving you peace of mind and quick access to medical advice when you need it most. We also provide reasonable workplace adjustments for those in need. Additionally, you can benefit from the Gymflex scheme, which offers up to 40% off annual gym memberships through our WSP flexible benefits program, as well as a comprehensive menopause support package. To enhance work‑life balance, WSP offers the “WSP My Hour,” allowing you to take one hour each day for personal activities, with the flexibility to make up the time earlier or later that day. We also provide part‑time and flexible working arrangements, the option to purchase additional leave, and the ability to use your bank holiday entitlement to suit you. We understand the importance of development and training to you. That’s why we foster a supportive environment that invests in your growth, whether through training, mentoring, or Chartership. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, please let us know if you require any workplace adjustments in support of your application. #J-18808-Ljbffr

Electrical Engineer Corsham £50,000 - £55,000 We're working with a client who is looking to add an Electrical Engineer to their team in Corsham. This is an exciting opportunity to work within a close-knit team and be able to work in a critical environment. Please note, this position is working on a Day shift pattern (7am - 7pm, continental pattern and will also require travelling to another site one/two times per month. Electrical Engineer Main Duties: • Conduct site inductions and issue relevant PTW, ATW, LOA, and dynamic risk assessments., • Carry out escort duties for all subcontractors on site., • Respond promptly to reactive maintenance and installation works., • Attend emergency reactive works, breakdowns, and remedial tasks as required., • Perform fault-finding activities and carry out necessary plant adjustments., • Record meter readings, monitor energy consumption, and identify opportunities for proactive energy savings., • Complete planned preventative maintenance (PPM) tasks in accordance with contract specifications., • Utilise Manager+ and MCIM systems to close out PPM tasks and maintain accurate asset data records., • Conduct monthly generator testing on a rotational basis with the Second Day Technician., • Carry out weekly fire alarm testing in accordance with site requirements., • Ensure full compliance with company policies and procedures., • Learn, understand, and effectively use our clients' SDSK system to ensure all reactive tickets are updated and closed within agreed SLA timeframes., • Maintain and update site logbooks where applicable., • Monitor building fabric conditions, report issues promptly, and ensure actions are completed in line with SLA requirements. Electrical Engineer Requirements:, • Minimum of 3 years experience in carrying out Electrical testing in a commercial environment, • City and Guilds / EAL / NVQ or equivalent in Electrical Installations / Engineering (Level 3 and regulations), • Desirable - hold the Test & Inspection (2391 or 2394 & 2395) Qualification Electrical Engineer Salary and Package:, • £50,000 - £55,000 per annum (Dependant on experience), • Continental Shift Pattern (Days only - 12 hour shifts, 7am - 7pm), • 20 days annual leave + Bank holidays, • Company pension scheme, • Internal progression, • Overtime available, • Additional training JBRP1_UKTJ

AtkinsRéalis is one of the world's leading design, engineering, & project management consultancies, employing over 50,000 professionals globally. The Building Design Practice delivers innovative engineering solutions across a wide range of sectors throughout the UK, including Commercial, Healthcare, Residential, Education, Rail, Heritage, and Blue Light projects. This role offers the opportunity to work within a national team of Building Design professionals, contributing to complex and high-profile projects. The position provides exposure to cutting-edge digital technologies, project management, sustainable design, & collaboration with global teams. It is an excellent opportunity for an Electrical Building Services Engineer to further develop their technical expertise while supporting AtkinsRéalis' commitment to innovation, digital engineering, & decarbonisation. Your role Design and specify electrical building services systems including power, lighting, earthing, life safety, telecoms, security, access control, lifts, and lightning protection. Produce detailed engineering calculations, technical specifications (NBS), reports, & project documentation. Collaborate with BIM teams, Global Technology Centre (GTC), & multidisciplinary stakeholders to deliver high-quality designs. Attend client & contractor meetings, undertake site surveys and inspections, & monitor installation works. Manage assigned project deliverables, budgets, timelines, risks, & scope changes. Ensure compliance with quality, environmental, & governance standards. Support the development & mentoring of junior engineers. Contribute to digital engineering, sustainability, innovation, & AI-driven design initiatives. Degree qualified in Building Services Engineering, Electrical Engineering, or a related discipline, with Chartered Engineer status (or working towards CEng via CIBSE/IET). Proven experience in electrical building services design within a consultancy or contractor design environment. Proficient in industry software including Amtech/ProDesign, Dialux/Relux, NBS, Microsoft Office, & ideally Revit and HV design tools. Strong understanding of UK technical standards, BIM, digital engineering, & modern design practices. Knowledge of decarbonisation, energy efficiency, building physics, carbon data analysis, commissioning, & performance evaluation. Experience or interest in Battery Energy Storage Systems (BESS), Photovoltaic (PV) design, & renewable energy solutions. Strong communication, report writing, presentation, & client-facing skills. Self-motivated with the ability to manage workloads independently, work within budgets & deadlines, & drive innovation in Revit, Digital Engineering, & AI. Explore the rewards and benefits that help you thrive - at every stage of your life and your career. Enjoy competitive salaries, employee rewards & a brilliant range of benefits you can tailor to suit your own health, wellbeing, financial & lifestyle choices. Make the most of a myriad of opportunities for training & professional development to grow your skills & expertise. And combine our hybrid working culture & flexible holiday allowances to balance a great job & fulfilling personal life. We're AtkinsRéalis, a world-class engineering services & nuclear organization. We connect people, data & technology to transform the world's infrastructure & energy systems. Together, with our industry partners & clients, & our global team of consultants, designers, engineers & project managers, we can change the world. We're committed to leading our clients across our various end markets to engineer a better future for our planet & its people. Find out more. This role may require security clearance and offers of employment will be dependent on obtaining the relevant level of clearance. If this is necessary, it will be discussed with you at interview. The vetting process is delivered by United Kingdom Security Vetting (UKSV) and may require candidates to provide proof of residency in the UK of 5 years or longer. If applying to this role please do not make reference to (in conversation) or include in your application or CV, details of any current or previously held security clearance. We are committed to creating a culture where everyone feels that they belong - a place where we can all be ourselves, thrive & develop to be the best we can be. So, we offer a range of family friendly, inclusive employment policies, flexible working arrangements & employee resource groups to support all employees. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures & ability. As a Disability Confident Leader, we are committed to offering an interview to all applicants who have a disability and meet the essential criteria. If you would like to be considered under this commitment, please let us know at the application stage. We strongly believe that world-class talent makes no distinctions based on gender, ethnic or national origin, sexual identity and orientation, age, religion or disability, but enriches itself through these differences. Created by the integration of long-standing organizations dating back to 1911, AtkinsRéalis is a world-class engineering services & nuclear company dedicated to engineering a better future for our planet and its people. We create sustainable solutions that connect people, data & technology to transform the world's infrastructure & energy systems. We deploy global capabilities locally to our clients & deliver unique end-to-end services across the whole life cycle of an asset including consulting, advisory & environmental services, intelligent networks & cybersecurity, design & engineering, procurement, project & construction management, operations & maintenance, decommissioning & capital. The breadth and depth of our capabilities are delivered to clients in strategic sectors such as Engineering Services, Nuclear and ... (maybe truncated) News and information are available at Atkinsrealis or follow us on LinkedIn. #J-18808-Ljbffr

Head of Property Services Location: Wales Salary: Competitive, dependent on experience Job Type: Permanent Hours: Full-time, 40 hours per week Sector: Housing / Social Housing / Property Services Hoop Recruitment are working with a leading housing organisation to recruit an experienced Head of Property Services. This is an exciting senior leadership opportunity for an experienced property services, repairs or maintenance professional looking to take responsibility for a large, multi-disciplinary service and make a genuine impact on customer experience, compliance and operational performance. As Head of Property Services, you will provide strategic and operational leadership across the organisation's property services function, ensuring the delivery of high-quality, efficient and customer-focused services. You will have responsibility for an annual budget and provide leadership across a wider workforce, including managers, supervisors, operatives, engineers, planners and administrators. Your remit will include: • Responsive repairs and maintenance, • Void property works, • Planned and cyclical maintenance programmes, • Gas servicing and electrical testing, • Compliance and building safety, • Contractor, contract and supply chain management, • Procurement and value for money, • Performance management and service improvement, • Customer satisfaction and complaints, • Repairs and maintenance systems and digital transformation, • Health, safety, risk and regulatory compliance, • Leadership, development and succession planning You will work closely with senior leaders and key stakeholders, providing assurance around performance, financial management, compliance and risk, while driving a culture of continuous improvement. We are looking for an established property services leader with significant experience of managing property maintenance, repairs or housing services. You will ideally have: • Significant experience managing a property maintenance or property services function, • Experience delivering compliance, cyclical and capital works programmes, • Experience managing large budgets and high-volume operational services, • Strong knowledge of property procurement, contracts and service delivery models, • Proven experience leading and developing large, diverse technical teams, • Strong financial management, cost control and job costing experience, • Excellent knowledge of health & safety, compliance and regulatory requirements, • Strong analytical, communication and relationship-building skills, • The ability to translate strategic objectives into effective operational delivery, • Excellent IT and repairs/maintenance systems experience A relevant professional qualification such as CIOB or RICS is desirable. Experience within a housing association/social housing environment would be advantageous, as would knowledge of Welsh Housing Quality Standards (WHQS). This is a high-profile opportunity to take ownership of a significant property services operation, with the autonomy and senior-level exposure to shape service delivery, improve performance and make a tangible difference to customers. If you're an experienced Head of Property Services, Head of Property, Head of Repairs, Property Services Manager, Repairs & Maintenance Manager or senior housing/property professional ready for your next challenge, we'd love to hear from you. Please note: a full driving licence and access to a car during working hours is required for this role. #J-18808-Ljbffr

Cardiff Harbour Authority maintenance team was created to maintain the Cardiff Barrage. An Electrical Engineering post has become available as part of the Barrage Engineering Team. The post requires a formal Electrical apprenticeship and a suitable engineering certification (HNC or similar). The role requires a high level of Electrical Engineering knowledge, particularly with regard to hydraulic control. The selected candidate will be expected to be flexible, an excellent team worker and have good communication skills. You must be enthusiastic and able to demonstrate initiative. Fault finding and problem solving skills are essential. In addition, heavy industry experience is a requirement of the post. Working at height from vessels on or around water and confined spaces, and operation of mobile plant. The role requires full participation in an out-of-hours standby service with attendance on site within an hour. The successful candidate must be prepared to work outside of normal hours and in all weather conditions. A statutory requirement under the post is to arrive on site and carry out rectifications works within an hour of any major failure being identified. In return, Cardiff Harbour Authority will provide a training package to include the opportunity for further education and development. This vacancy is suitable for post share. We welcome applications in both English and Welsh. Applications received in Welsh will not be treated less favourably than English applications. We understand you might use AI and other resources for your application; however, please ensure all information you provide is factually accurate, truthful, original and does not include ideas or work that is not your own. Please note the Council does not accept CVs. When completing the supporting information section of your application, please ensure you refer to the below located on our website: Important information you need read in order to complete your application:- Job Category Harbour Authority Department Economic Development Working Pattern/Contract Type Full Time Permanent #J-18808-Ljbffr

Joining our Rod and Bar Mill Team as a Senior Electrical Engineer, your days will be exciting and varied. Your time will be spent between the offices, and down on the plant, so no two days will look the same. Some of your key responsibilities will include: • Planning, prioritising, scheduling, and managing electrical activities (e.g. planned maintenance programmes, shutdowns, and emergency repairs) to rectify breakdowns and minimise business disruption., • Provide technical advice and support to other electrical and automation engineers in the department, including root cause analysis, fault finding, and implementation of corrective and preventative actions., • Prioritising health and safety policies in all areas of your work, and leading by example You will have extensive experience working in the Electrical or Automation Engineering fields, preferably in a hot rolling mill. Because of this, you will have the technical expertise to support the training and development of the engineering team, as well as contribute within the wider team to ensure the successful running of the mill. Most importantly, you will bring passion, purpose, and a continuous improvement mindset, as well as a strong focus health and safety. To be considered for this opportunity, you will require a degree in Electrical Engineering, or a related field (BSc minimum). • Healthcare cash plan: Claim back money towards the cost of your essential healthcare and receive access to valuable health and wellbeing services., • Pension: We contribute 5% of your salary towards your pension., • Life assurance: Group Life assurance to provide your family with financial and bereavement support., • Rewards: Discount and rewards from hundreds of retailers, restaurants and destinations. You can choose from one-off vouchers, reloadable discount cards, discount codes or receive cashback., • Gym Discounts: Get access to discounted gym memberships, online subscriptions, retail discounts, food & drink as well as health experiences., • Holidays: You will receive 25 days paid annual leave plus bank holidays., • Cycle to Work Scheme: Save money on bikes and biking accessories through the Cycle to Work Scheme., • Electric Car Scheme: Save up to 40% on the cost of an electric car by paying for it through salary sacrifice., • MyMindPal: Access to MyMindPal to support your individual mental health fitness., • Free on-site parking: We have free parking across our sites. You’ll be joining a recycling company – we recycle scrap metal into new steel products. We’re the largest producer of reinforcing steel in the UK and one of the largest metal recyclers, too. We’re passionate about the circular economy and working towards our decarbonisation pathway. We are committed to fostering a diverse and inclusive workplace, where all employees are valued and respected. We encourage individuals from all backgrounds to apply and join our team, as we believe that embracing different perspectives and experiences will strengthen our workforce and drive innovation in the steel industry. We are dedicated to providing a safe and secure environment for all employees, ensuring that safety standards are consistently upheld in every aspect of our operations. Please let us know if you need any reasonable adjustments throughout the recruitment process. If you have any questions about the role or process, please get in touch with our Talent Team. #J-18808-Ljbffr

Position: Field Service Engineer Job ID: 2177/8 Location: Home Based - UK or Europe Rate/Salary: £38,000 - £50,000 basic | OTE £80,000 - £100,000 Type: Permanent HSB Technical Ltd is a specialist recruiter within the Power & Propulsion,Shipbuilding, Maritime Shipping, Energy, and Subsea sectors. We have permanent and contract vacancies across the UK and overseas. Field Service Engineer - Overview The ideal candidate will possess hands-on mechanical and hydraulic engineeringexperience with an electrical aptitude. They must be able to supervise and work independently, maintaining professional standards at all times. The engineer will work from mechanical drawings and be fully competent to deliver complex projects toexacting standards. Experience in heavy engineering, particularly within the marine sector on thruster and propulsion systems, is essential. Experience for an OEM propulsion or thruster company, or to OEM standards, is highly desirable. Candidatesshould have experience with one or more of the following brands: Brunvoll, Scottel, Voith, Veth Propulsion, Wartsila, Kongsberg, DTG Propulsion, Thrustmaster, Kawasaki, Berg Propulsion, Rolls Royce, Jastram, Aquamaster, Kamewa, Kamome, Liaan, Lips, MAN, Nakashima, Ulstein The role involves work on commercial vessels, including tankers, FPSOs, and other large ships, often in drydock, covering repairs, servicing, installation, and maintenance of thruster and propulsion systems. Overseas travel may berequired. Key Responsibilities - Field Service Engineer • Service, repair, maintenance, and final commissioning of thruster and propulsion systems, • Read and interpret mechanical drawings accurately, • Diagnose mechanical problems using engineering skills and drawings, • Produce detailed technical reports and recommendations, • Complete service reports and timesheets promptly, • Maintain communication with Service Manager(s) and Support Staff, • Ensure client satisfaction and work to OEM standards Qualifications & Requirements - Field Service Engineer • Mechanical maintenance/repair experience of marine thruster and propulsion systems, • Experience with OEM propulsion or thruster companies or standards, • Hands-on experience with the listed brands, • Engineering background, • Confident working independently and under supervision, • Full driving licence, • Ability to travel globally This vacancy is advertised by HSB Technical Ltd, appointed to act as recruitment partner for this role. JBRP1_UKTJ

What if you could shape a career as unique as you? At WSP, you can always find opportunities to grow and do what matters to you. Make the most of our global reach to discover new challenges and chances to work with diverse, talented individuals who will help you expand your horizons. WSP are looking for an enthusiastic and diligent Electrical Engineer to join the Maritime team based in the UK. You will complement the wide experience of a highly knowledgeable and dynamic team of Maritime experts based in the UK and across the globe. You will contribute to the technical delivery of a wide range of UK-based and international projects for clients ranging from local authorities to private clients and international terminal operators. You will have the opportunity to provide input to all stages of project maturity, including Feasibility Studies, Concept Designs, FEED Studies, Value Engineering and Detailed Design. • Prepare electrical deliverables such as Single Line Diagrams, cable calculations, cable block diagrams, plant layouts, cable routing, cable containment design, switchgear configurations philosophies and produce bill of materials/quantities for electrical systems in accordance with international standards, and client requirements with minimum guidance., • Draft electrical specifications and review contractor design submissions and assess them against Employers Requirements, specifications, national and international standards, codes and practice and good working practices., • Work with equipment vendors on developing designs of equipment packages and participating in technical evaluations of vendor designs., • Work with owners, operators and investors to assess the condition of electrical assets and their designs for capability, risk, opportunity and need for intervention., • Develop project management skills by working closely with clients., • Hybrid role with occasional site visits around the UK and overseas travel for short periods., • Collaborate in a highly inclusive and dynamic environment where teamwork, enthusiasm and empathy are valued, and broaden skills with support from the team., • Degree or similar qualification in relevant Engineering subject with significant post-graduate experience in electrical design and/or operation, maintenance and testing., • Attainment of or working towards ECUK Chartered (CEng) level leading to Corporate Member of IET., • Chartered Engineer or working towards IEng/CEng and a member of a relevant Engineering Institute., • Ability and desire to lead the development of Electrical deliverables and/or assessment of assets under construction or in operation., • Knowledge of design, construction and operation of power and energy projects., • Experience on Maritime projects (e.g., container terminals, liquid and dry bulk terminals, offshore wind, ro-ro)., • Strong analytical and problem-solving abilities and civil engineering skills., • Ability to check and produce quality technical outputs and solutions., • Ability to coordinate and work effectively with other disciplines and team members., • Competence in using MS Office-based software., • Clear English communication skills, both orally and in writing., • Personable, approachable, enthusiastic and empathetic., • Hold a full UK Driving Licence., • Knowledge and practical experience of design tools: AutoCAD, Revit, AMTECH ProDesign, ETAP, PSCAD, PowerFactory (DIgSILENT), Dialux, Relux. Don’t quite meet all the criteria? Apply, and we can see how your experience aligns to this role and other opportunities within the team. Imagine a better future for you and a better future for us all. Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. We are one of the world’s leading engineering and professional services firms. Our 72,800 passionate people are united by the common purpose of creating positive, long-lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 9,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. • Work-life balance: Our hybrid working policy offers the flexibility to work from home two days a week, with opportunities to collaborate in our modern offices across the UK., • Inclusivity & Belonging: We welcome applicants with varied backgrounds and experiences and promote a culture of inclusion and belonging., • Health & Wellbeing: Thrive programme and Virtual GP service; reasonable workplace adjustments; Gymflex scheme; menopause support., • Flex your time: WSP My Hour for daily personal activities; options for part-time/flexible working, extra leave, and bank holiday utilization., • Your development: Training, mentoring, and Chartership opportunities. We positively encourage applications from suitably qualified candidates regardless of sex, race, disability, age, sexual orientation, gender identity, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, and please let us know if you require workplace adjustments. #J-18808-Ljbffr

We are looking for a keen and experienced service engineer, fitter, technician or mechanic to join our team. This is a fantastic opportunity for someone who is either an experienced powered access engineer OR maybe you are an experienced car mechanic, plant fitter or similar and want to do doing something a bit different. As a Workshop Service Engineer for Nationwide Platforms you will work within a busy depot to inspect, repair and maintain our machines ensuring that they are ready for use by our customers. Our machines are powered access machines such as booms and scissor lifts but don’t worry full training will be given. So, providing you have a great attitude and are willing to learn plus have some mechanical/ electrical engineering experience behind you then this could be the role for you. In reward we can offer you a competitive salary, life assurance x2 contractual salary, Westfield health care plan, 25 days holiday and a pension. Working hours are Monday - Friday 8am - 5.30pm. • Support the Senior Service Engineer in the effective running of the Depot workshop within the region., • Carry out pre-delivery inspections (PDI) of machines at client premises and at depot as required, and in conformance with manufacturer’s specification, company policy and the regulations affecting the use. Ensure that there is no deficiency or defect likely to affect the safe working of a machine. Notify appropriate manager of any defective or unsafe equipment., • Repair machines at depot or on site as required to ensure conformance with manufactures specification and company policy., • To complete planned maintenance activities including maintaining the appearance of the fleet to corporate standard., • Handover machines to customers and familiarise customers with safe machine operation in accordance with company procedures., • Act as an ambassador for the company, providing a high standard of customer care and being polite at all times. Relay appropriate customer queries to depot staff as required., • Accurately complete all relevant paperwork including engineer’s report, off hire, pre/delivery inspection and service sheets., • Update system on machine status change i.e. PDI carried out, Machine under repair, 6 monthly statutory Inspection completed., • Relevant general engineering maintenance qualification, preferably to NVQ level 3 or equivalent., • Experience in diesel engineering, auto electrics, hydraulics and diagnostics fault finding., • Have a mature outlook and the ability to prioritise tasks and work well under pressure., • Understand the importance of excellent customer service. Part of the Loxam Group, Nationwide Platforms are the UK's leading specialist provider of Powered Access rental equipment, with the largest and broadest fleet, local depots spread across the country and our wealth of experience partnering with companies in a variety of sectors including Construction, Warehouse & Distribution, Aviation, Facilities Management, Industrial Services, Telecoms and Media, our customers can depend on us to provide the right solution to support their every working at height need. At Nationwide Platforms, your safety is absolutely our priority. Our award winning BlueSky Solutions and Training division offer our customers access to the latest and safest ways to work and through long standing partnerships with our manufacturers, we will always provide equipment that will lead the way to a safer industry. Some of our innovations include the award-winning secondary guarding systems and Harness ON, a range of pioneering Material Handling Attachments (MHAs), and the SkySentry control and monitoring system. At Nationwide Platforms, we are dedicated to fostering a diverse, equitable, and inclusive workplace. We recognise that a variety of perspectives, experiences, and backgrounds is crucial to our success in the Powered Access industry. Our commitment is to ensure that every employee feels respected, valued, and supported in their work environment #J-18808-Ljbffr

If you’re a qualified Electrical Engineer who enjoys solving problems in the field, this is an opportunity to join a fast-growing EV infrastructure business delivering critical charging solutions across the UK. Working across AC, Rapid DC, Ultra & High-Power Charging Systems (HPC), you will play a key role in commissioning, maintaining and repairing EV charging equipment, with clear opportunities to develop your skills in a rapidly growing sector. • Diagnose and resolve electrical and system faults on EV charging equipment., • Commission, configure and carry out firmware updates where required., • Perform planned maintenance and reactive repairs to maximise uptime., • Work closely with internal teams to ensure work is completed accurately and on time., • Provide on-site technical support and clear updates to customers., • Ensure accurate reporting and full compliance in line with safety standards., • Paid Overtime (1.5x/2x rates) – strong earning potential, • On-Call Allowance (1 in 3 weeks), • Covering Bristol & South Wales (home-based with daily travel and occasional overnight stays), • Benefits: Company Van & Fuel Card, 30 Days Annual Leave, Travel & Subsistence Expenses, Performance Bonus, Bupa Healthcare, Pension Scheme, EV scheme and more, • NVQ Level 3 (or equivalent) Electrical Qualification, AM2 and BS7671 - IET Wiring Regulations (18th Edition)., • City & Guilds 2391-52 Inspection & Testing and a valid JIB Gold Card., • At least 3 years’ experience working to SLAs in a commercial field-based electrical installation/maintenance environment., • Strong fault-finding and diagnostic ability with confidence working independently in the field., • Excellent communication and interpersonal skills with an ability to collaborate and work closely with both internal stakeholders and customers., • Familiarity with test and measurement equipment (multimeters & voltage testers)., • A valid UK driving licence, happy with regular travel and occasional overnight stays., • Experience working within EV Charging/Renewable Energy would be advantageous but not essential; our client is open to speaking with candidates from a range of industries., • Candidates must have a permanent Right to Work in the UK. Our client cannot offer visa sponsorship for this position. #J-18808-Ljbffr

Critical Shift Leader Harlow Up to £64,000 Join our client on a Critical, state of the art, commercial property in Harlow. This is a fantastic opportunity for an experienced Shift Leader looking to avoid the hassle of commuting to Central London, this role provides a great salary, High Voltage training, internal progression and valuable experience. The successful candidate will be fully qualified in electrical installations, (City and Guilds / NVQ or equivalent) at least 5 years prior experience in commercial maintenance and a client facing attitude. Duties: • PPMs & Reactive maintenance, • Single and Three Phase Power, Motors, Generators (on/off load tests), UPS, LV/HV switching, Shutdowns, Emergency Lighting, Fire Alarm Test, AHUs, FCUs, VAVs, CRAC units, Sprinkler Systems, Pumps BMS Operation, • Organising subcontractors, • Quotations, • Health & Safety, • Logbooks, • Risk assessments, • Permits to work Requirements:, • City & Guilds / NVQ (or equivalent) qualification in Electrical Installations, • At least 5 years prior experience in commercial maintenance, • Experience in High Voltage switching / scheduling - Desirable, • Experience in critical environments - Desirable, • Career driven and motivated, • Polite and personable Salary and Benefits:, • Up to £64,000, • High Voltage training provided, • Avoid the hassle of commuting to London, • Continental shift pattern (Days and nights), • 20 days annual leave entitlement, • Company pension, • Overtime readily available, • Join a large building service provider, • Valuable experience in a critical environment Posted by Luke Clark JBRP1_UKTJ

At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. WSP is looking for a Senior Engineer to join our industry‑leading Intelligent Infrastructure team. We are expanding our Digital Infrastructure Design Capability across all areas and are actively seeking individuals to join our team who have a strong enthusiasm for digital technologies and digital design methodologies. It is crucial to us that our team members question traditional design practices, challenge the status quo, and conceive innovative solutions to enhance our design and delivery processes. If you have an interest in design and enjoy seeing your work implemented on the roadside, and if you aim to innovate in digital design production, then WSP Intelligent Infrastructure is the team for you. We operate as consultants, designers, and thought leaders, understanding complex design challenges, providing reliable advice, and creating designs that serve the best interests of our clients, maintenance personnel, and their customers. As a Senior engineer, you will engage in design tasks within a broader team, facilitating your on‑the‑job learning of all aspects related to roadside infrastructure design. You are expected to collaborate efficiently with the team, share ideas, provide support, and address any gaps as necessary. Additionally, you will work with a diverse group of individuals and contribute to the mentoring and development of our junior staff. Your role will require a strong problem‑solving mindset and the ability to navigate ambiguous situations, escalating issues to senior staff when appropriate. • A degree in a relevant engineering discipline, or relevant experience in technology design, • Either working towards professional registration or professionally registered with an accredited institute., • In possession of domain knowledge in a relevant industry, such as power, communications, electrical, electronics or highway design. The ideal candidate should have the following skills or competencies: • Understanding of roadside infrastructure and design standards, • Ability to carry out design processes, including the use of design tools, • Working as part of a team in delivering designs or schemes, • Collaborating with colleagues from other disciplines Join our close‑knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world. We are one of the world’s leading engineering and professional services firms. Our passionate people are united by the common purpose of creating positive, long‑lasting impacts on the communities we serve through a culture of innovation, integrity, and inclusion. With over 11,000 professionals across the UK and Ireland, we are dedicated to our local communities and propelled by international brainpower. At WSP, we understand that work is just one aspect of your life. It’s important to make time for you, your family, friends, interests and your community. Our hybrid working policy offers the flexibility to work from home two days a week, while also providing opportunities to collaborate in our modern offices across the UK. We welcome applicants with varied backgrounds and experiences. We enable rewarding careers by encouraging people to bring their whole and authentic selves to work so that our work represents the fullest spectrum of society. We celebrate integrity and treat people with respect, supporting each other and embracing a culture of inclusion and belonging at WSP. We have our employee resource groups bringing together employees and allies with different backgrounds to promote a culture of inclusivity. We are committed to supporting our people, giving you the tools to make improvements to your health and wellbeing through our Thrive programme. Our Virtual GP service gives you access to an NHS or Irish Medical Council GP at a time and place that suits you – giving you peace of mind and quick access to medical advice when you need it most. We also provide reasonable workplace adjustments for those in need. Additionally, you can benefit from the Gymflex scheme, which offers up to 40% off annual gym memberships through our WSP flexible benefits program, as well as a comprehensive menopause support package. To enhance work‑life balance, WSP offers the “WSP My Hour,” allowing you to take one hour each day for personal activities, with the flexibility to make up the time earlier or later that day. We also provide part‑time and flexible working arrangements, the option to purchase additional leave, and the ability to use your bank holiday entitlement to suit you. We understand the importance of development and training to you. That’s why we foster a supportive environment that invests in your growth, whether through training, mentoring, or Chartership. Here at WSP we positively encourage applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion or belief, marital status, pregnancy or maternity/paternity. As a Disability Confident leader, we will interview all disabled applicants who meet the essential criteria, please let us know if you require any workplace adjustments in support of your application. #J-18808-Ljbffr

Electrical Technician Monday - Friday As an Electrical Technician in our Melt Shop, you will be an integral part of the Electrical Engineering team. You will make sure that all maintenance activities are executed to a high standard, inspect equipment to detect faults and provide support for the Craft team. You need to be someone who is robust and passionate about engineering as no two days are the same. You will be someone with hands on experience, enjoys getting stuck in and always searching for ways to improve including keeping health and safety as a top priority. You need a minimum of NVQ L3 in Electrical Engineering to be considered for this role. Some of our benefits include… ·Healthcare cash plan: Claim back money towards the cost of your essential healthcare and receive access to valuable health and wellbeing services. ·Pension: We contribute 5% of your salary towards your pension. ·Life assurance: Group Life assurance to provide your family with financial and bereavement support. ·Rewards: Discount and rewards from hundreds of retailers, restaurants and destinations. You can choose from one-off vouchers, reloadable discount cards, discount codes or receive cashback. ·Gym Discounts: Get access to discounted gym memberships, online subscriptions, retail discounts, food & drink as well as health experiences. ·Holidays: You will receive 25 days paid annual leave plus bank holidays. ·Cycle to Work Scheme: Save money on bikes and biking accessories through the Cycle to Work Scheme. ·Electric Car Scheme: Save up to 40% on the cost of an electric car by paying for it through salary sacrifice. ·MyMindPal: Access to MyMindPal to support your individual mental health fitness. ·Free on-site parking: We have free parking all across our sites. About the company You'll be joining a recycling company – we recycle scrap metal into new steel products. We're the largest producer of reinforcing steel in the UK and one of the largest metal recyclers, too. We're passionate about the circular economy and working towards our decarbonisation pathway. Sound interesting? Click the link below to apply. We are committed to fostering a diverse and inclusive workplace, where all employees are valued and respected. We encourage individuals from all backgrounds to apply and join our team, as we believe that embracing different perspectives and experiences will strengthen our workforce and drive innovation in the steel industry. We are dedicated to providing a safe and secure environment for all employees, ensuring that safety standards are consistently upheld in every aspect of our operations. Please let us know if you need any reasonable adjustments throughout the recruitment process. If you have any questions about the role or process, please get in touch with our Talent Team. JBRP1_UKTJ