Process control engineer jobs in London - Page 2Crear alertas

Are you ready to take the next step in your career? Do you want to do meaningful work that improves quality of life? At Tetra Tech, you will work with high-performing teams who are passionate about using their expertise to find solutions to challenges across a wide variety of projects. Summary: We are seeking a full-time Principal Structural Engineer with strong design background to support our structural engineering team in London.The team undertakes a wide variety of projects for the private and public sector, across a range of development sectors. We seek to provide integrated solutions incorporating state of the art design. Responsibilities: We require an experienced individual of high calibre to assist in the design and management structural engineering works associated with a wide variety of major and challenging infrastructure projects for the private and public sector. Specifically, we are seeking to strengthen our design and delivery capacity and require an applicant experienced in a broad range of projects.Experience of design and the design process throughout all stages from concept to delivery is essential, as well as managing small teams to achieve each clients requirements.Experience in the management of other design disciplines will be helpful though not essential. You will take individual responsibility for a range of project types, manage them independently and be the clients main point of contact. Projects range in size but may include development of significant estate portfolios, or smaller individual projects.Projects are typically a mixture of new-build and refurbishment. Sectors would include healthcare, education, defence & security, commercial, science & technology, and others. You will lead independently and proactively on technical aspects including preparing designs, specification, technical approval submissions, site supervision and will be fully conversant with industry design standards. There will also be the opportunity to work collaboratively with senior management on research projects and innovative initiatives. About You: You are an enthusiastic engineer who likes a challenge and has aspirations to further their career. Be a chartered civil or structural engineer (CEng and either MICE or MIStructE). Have good interpersonal and communication skills, ability to work independently, a collaborative approach and a proven ability to deliver work on time. Be confident working directly with clients, other design professionals, and contractors. Havestrong experience andbring a sound knowledge and understanding of structural engineering projects through your proven experience. You can demonstrate your abilities in producing drawings, specifications, calculations and technical reports. Have technical knowledge including use of industry-standard software (ideally Tekla/Robot) and basic ability with Revit. Have sound experience of commercial management of projects and change control. Be committed to encouraging good health and safety practices within the workplace and within design. Display enthusiasm, flexibility, and versatility as a team player. Be able to mentor, enthuse and support team members. Have a desire to build upon your existing experience, continuing your professional development with Tetra Tech. Hold a full UK Driving Licence. Have the ability to obtain UK security clearance. About Tetra Tech: Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. At Tetra Tech, we provide a collaborative environment that supports individual performance, innovation, and creativity. We are proud to offer competitive compensation and benefits. For more information on our company, please visit our website at. To apply, please submit your CV and cover letter on the Careers section of our website. Tetra Tech is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. We thank all applicants for their interest; however only those selected for an interview will be contacted. TPBN1_UKTJ

Manufacturing Engineer/CNC Programmer Romford Full time, permanent Salary: £38,000 £52,000 per annum ABOUT THE CLIENT Our client is a leading precision engineering and aerospace manufacturing specialist supplying high-integrity machined components and assemblies. Operating under strict aerospace regulatory frameworks, the business delivers complex machined parts to major aerospace and defence customers, working to AS9100 standards. They combine advanced CNC machining capability with strong engineering, NPI and process-control disciplines, ensuring excellent quality, repeatability and compliance across all product lines. ROLE PURPOSE The Manufacturing Engineer & CNC Programmer will generate CNC programmes for 3-, 4- and 5-axis machining centres while developing and optimising manufacturing processes for new and existing products. The role requires strong manufacturing engineering experience and precision machining knowledge, especially within aerospace environments. You will create tooling plans, inspection requirements, routings, workholding and process documentation to support controlled, efficient and compliant production. A key responsibility is improving workflows, equipment layouts and overall manufacturing efficiency, while ensuring the lowest possible cost without compromising quality. KEY RESPONSIBILITIES & DELIVERABLES CNC Programming & Process Development Prepare CNC programmes from planned processes using CAD/CAM software (GibbsCAM preferred). Develop tool definitions, setup sheets, tooling plans and related documentation. Prove out CNC programmes into production and optimise for efficiency and repeatability. Own all supporting process elements including routings, tooling, gauges, fixtures, test equipment and CNC files. Manufacturing Engineering Determine materials, tooling and methods to meet product specifications at lowest cost. Analyse and plan workflow, space utilisation and equipment layout for efficiency gains. Improve current operations to enhance quality, output and cost performance. Support the development of transparent cost structures and identify cost-reduction opportunities. Ensure all processes comply with the Quality Management System and aerospace requirements (AS9100). Produce process documentation to strengthen process control. Research emerging manufacturing technologies to support long-term business strategy. REQUIRED EXPERIENCE Strong proficiency in CAD/CAM software for 3D model generation and CNC programming (GibbsCAM preferred). Skilled in machine tool selection, cutting tool specification and application. Ability to interpret technical drawings, specifications and engineering documentation. Experience using SOLIDWORKS. Knowledge of precision engineering processes including milling and turning. Prior experience working to AS9100 or similar aerospace standards. Ability to plan workloads and work to deadlines within a fast-paced production environment. QUALIFICATIONS Degree / HNC / HND (or equivalent) in Mechanical, Manufacturing or Aerospace Engineering. Experience in a manufacturing or production engineering role within a precision engineering organisation (aerospace preferred). Trained and qualified in relevant CAD/CAM software systems. PERSONAL CHARACTERISTICS Strong analytical and problem-solving capabilities with rapid containment decision-making. Excellent communication skills across all levels of the organisation. Ability to simplify complex problems and prioritise effectively. High levels of integrity, accountability and ownership. Highly motivated, self-managing and results-driven. Customer-focused approach with a desire to drive continuous improvement. ADDITIONAL / DESIRABLE SKILLS Previous experience using GibbsCAM (or similar CAD/CAM software). Ability to measure, analyse and present capital investment opportunities for new technology. Project management skills advantageous. TPBN1_UKTJ

Design Engineer (Electrical/ Switchgear) Dartford Up to £50,000 + Progression + Company Pension + Free Parking + Training & Development Are you a Design Engineer with electrical experience looking to join a close-knit, industry-leading team that offers ongoing training, development, and real progression within a supportive company with amazing staff retention? Do you want the opportunity to a family-feel business at the forefront of bespoke HV & LV switchgear solutions, known for their quality, cutting-edge products, and market reputation? On offer is a fantastic opportunity to develop your career within a highly specialised engineering team, working on bespoke, technically varied projects for a fast-growing leader in switchgear design and manufacture. You will join an established group of engineers who will support your growth, whether you're a seasoned engineer or looking to step into a junior design role. In the role you will produce detailed CAD designs for control panels and switchgear assemblies, collaborate closely with project engineers to develop accurate and cost-effective solutions, ensure appropriate component selection, and deliver designs in line with British Standards and internal specifications. You will also compile parts lists and liaise with procurement to support the build process from concept to completion. Are you a Design Engineer with electrical experience looking to join a close-knit, industry-leading team that offers ongoing training, development, and real progression within a supportive company retention? The Role Producing detailed CAD designs for bespoke LV control panels and switchgear. Working with project engineers to develop compliant, cost-effective engineering solutions. The Person Electrical Design Engineer Based in Dartford or easily commutable to Keywords : Design Engineer, LV, Low Voltage, Switchgear, Control Panels, CAD, ePlan, Electrical Engineering, Dartford, Kent, HV, London, Gravesend, High Voltage Reference Number: BBBH22729 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Project Engineer (Electrical – Water Treatment) We are seeking an Electrical Project Engineer to support the delivery of electrically biased projects within the water and wastewater treatment sector . The role will involve managing electrical installations, upgrades, and commissioning activities on live treatment sites, ensuring works are delivered safely, efficiently, and to programme. Key Responsibilities Deliver electrical projects on water and wastewater treatment sites Scope and manage electrical works including LV systems, MCCs, control panels, instrumentation, and cabling Coordinate electrical installation, subcontractors, and site activities Support electrical design coordination and commissioning activities Produce method statements, risk assessments, and commissioning documentation Manage project costs, programmes, and technical compliance Ensure completion of electrical O&M manuals and handover documentation Maintain high standards of health, safety, and environmental compliance Requirements Experience as an Electrical Project Engineer within water treatment, utilities, or process environments HNC/HND or NVQ Level 3 in Electrical Engineering (or equivalent) ECS Gold Card (or equivalent electrical competency) SMSTS qualification Strong understanding of electrical systems in process or industrial environments Ability to travel to sites across East Anglia Desirable Experience working on live water or wastewater treatment sites NVQ Level 4 or higher in an electrical discipline Basic knowledge of control systems / instrumentation (advantageous) TPBN1_UKTJ

Lead Chiller Engineer / Chiller Engineer Andover Basic Salary: Up to £55,000 + Vehicle + Overtime + Benefits A leading temperature-control hire company based near Andover is expanding and now looking to hire both a Lead Chiller Engineer and an experienced Chiller Engineer to support a busy fleet of hire chillers and HVAC equipment. Whether you're an established Lead Chiller Engineer or a skilled Chiller Engineer ready to take the next step, this opportunity offers stability, autonomy and long-term progression in a growing hire business. The Role As part of the engineering team, youll be responsible for service, maintenance, repair, fault-finding and commissioning across a range of hire chillers and associated HVAC systems. The Lead Chiller Engineer will additionally support junior engineers and act as the technical point of contact. Key Responsibilities Service, repair and maintain hire fleet chillers Diagnose mechanical & electrical faults on various manufacturers Commission chillers and HVAC equipment Support planned and reactive works across customer sites (Lead role) Mentor junior engineers and provide technical guidance Maintain accurate service records and ensure F-Gas compliance Requirements Strong background as a Chiller Engineer or Lead Chiller Engineer Experience with process chillers, low-temperature systems or hire equipment F-Gas 2079 qualification Excellent diagnostic and problem-solving skills Full UK driving licence Package Basic salary up to £55,000 (depending on role and experience) Company vehicle & fuel card Overtime & call-out opportunities 25 days holiday + bank holidays Training on specialist chillers and equipment Clear progression routes within a growing hire business About Cloud Recruitment Cloud Recruitment is a specialist engineering and technical recruitment partner, supporting clients and candidates across the UK with a focus on quality, transparency and long-term relationships. We combine industry expertise with modern cloud-based tools to deliver a fast, reliable and people-focused service. All applications are handled confidentially. TPBN1_UKTJ

Position: Pump Engineer Location: London Salary: £40,000 - £45,000 We currently have a Pump Engineer opportunity available with our client, a leading specialist in the supply, installation, and ongoing maintenance of a range of clean-water pump systems across London and the surrounding areas. Pump Engineer Job Overview Travel to commercial sites across London to complete service/maintenance jobs on clean water pumping systems Responding to reactive breakdown call outs Working on booster sets, pressurisation units, and pump controls Completing pump overhauls, bearing changes, and assisting with occasional installation and commissioning tasks Pump Engineer Job Requirements Strong technical background within the clean-water pumping sector Confident in completing service and maintenance works on booster sets, pressurisation units, and pump control panels Experience working on pumps from manufacturers such as Grundfos, Wilo, Lowara, and KSB Full UK driving licence Based within a commutable distance of London Desirable qualifications - CSCS Card, 17th/18th Edition, Confined Spaces Pump Engineer Salary & Benefits Salary £40,000 - £45,000, depending on experience Company van Door to door travel pay 33 days holiday (including bank holidays) 40 hour working week Overtime starting at 1.5x and rising to 2x 1 in 4 call out rota with a retainer paid along with overtime rates Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Senior Electrical Engineer, Merseyside Location: Knowsley Industry: Power & Energy Scope of Work: A key role within the design team delivering electrical design work of gas powered generation, CHP plants, energy storage systems and micro grids, while supervising and developing junior engineers in the business.. Are you an experienced Electrical Engineering professional with experience in power generation projects? Have you ambitions to lead on the delivery of complex design projects from concept through detailed design, installation, commissioning and handover? Turner Lovell is recruiting a Senior Electrical Engineer to join a leading, highly innovative, EPC company in the UK. This is a brilliant opportunity for the right individual to join a well established, highly regarded business that is experiencing growth through their success in the market. You will be working with a large engineering team in the North West, mentoring more junior engineering team members and collaborating across this multi-disciplinary team. With the support or the wider team, your responsibilities will include: Translate and develop concepts into designs to meet the functional and contractual specifications of secured orders, developing and detailing specifications, producing calculations and making component selection. Using Software to carry out load flow, fault analysis and protection studies. Support and assist in the sales stage of a project by taking responsibility for ensuring that conceptual design and tender preparation documents are provided to meet the timescales and quality standards required for presentation to the customer. Provide support to the Project Manager during the design, installation commissioning and testing phases of the project, ensuring the timely production of all necessary documentation. Engineering sign off is to ensure the design process has been followed and validating that general electrical engineering principles have been met. The ideal profile is someone with: Electrical Engineering experience working in an associated industry with a background in power generation. Knowledge of low and of medium voltage power trains and associated control and instrumentation. Experience in managing and leading junior team members. Full driving license If you are considering what your next role could look like within Electrical Engineering, and have a passion for playing a part in delivering important projects, please apply and get in touch with Mark Canning via the link provided for more information. TPBN1_UKTJ

As we win new work our workload increases, which means we have an exciting opportunity to join our established Belfast Engineering team. You will have responsibility for design and management of mechanical building services projects in complex buildings, including refurbishing existing buildings. In some cases, you will be part of a larger team on major projects, as well as managing your own projects. The role: Responsible for the delivery of engineering design solutions encompassingall aspects of mechanical building services engineering consultancy End to end process taking designs from concept to site and through commissioning Carry out calculations and co-ordinate mechanical services to a high level of accuracy Work within a team delivering complex and large scale projects Work across a number of sectors including, commercial, industrial, retail, healthcare, education and leisure within both public and private domains Mentor and support the development of junior members of staff including Graduates and Apprentices Understanding of contractual matters, project management, managing team and change control. About You: You will be expected to have a relevant education and experience in Building Services or Mechanical Engineering or equivalent and be a member of the CIBSE, IMechE, IET or equivalent professional body, although relevant design experience would be considered. Ability to handle meetings with Clients and Contractors through all project stages Relevant experience in design and supervision of projects; Either Chartered Engineer or working towards chartered status Relevant experience in design and management of projects. Experience in the health, education and/or defence sectors would be benefical Current driving licence; Ability to working within a team and major complex projects throughout the UK; Experience in AutoCAD, National Engineering Spec (NES) Microsoft office; REVIT experience welcomed; Understanding of IES or other thermal modelling software Energy Assessor capability would be welcomed Understanding of BREEAM on M&E Services; Understanding of Hevacomp or other calculation software Willingness to travel for project work, withinUK and Ireland, is essential Willingness to travel for project work, worldwide on short period is welcome Willingness to obtain necessary Security Clearances, is beneficial About Tetra Tech: Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. TPBN1_UKTJ

Principal Structural Engineer Bristol Are you ready to take the next step in your career? Do you want to do meaningful work that improves quality of life? At Tetra Tech, you will work with high-performing teams who are passionate about using their expertise to find solutions to challenges across a wide variety of projects. Summary: We are seeking a full-time Principal Structural Engineer with strong design background to support our structural engineering team in Bristol and Plymouth.The team undertakes a wide variety of projects for the private and public sector, across a range of development sectors. We seek to provide integrated solutions incorporating state of the art design. Responsibilities: We require an experienced individual of high calibre to assist in the design and management structural engineering works associated with a wide variety of major and challenging infrastructure projects for the private and public sector. Specifically, we are seeking to strengthen our design and delivery capacity and require an applicant experienced in a broad range of projects.Experience of design and the design process throughout all stages from concept to delivery is essential, as well as managing small teams to achieve each clients requirements.Experience in the management of other design disciplines will be helpful though not essential. The ability to establish good relationships with other disciplines is essential. You will take individual responsibility for a range of project types, manage them independently and be the clients main point of contact. Projects range in size but may include development of significant estate portfolios, or smaller individual projects.Projects are typically a mixture of new-build and refurbishment. Sectors would include healthcare, education, defence & security, nuclear, commercial, science & technology, and others. Full training would be offered for areas of particular specialism. You will lead independently and proactively on technical aspects including preparing designs, specification, technical approval submissions, site supervision and will be fully conversant with industry design standards. There will also be the opportunity to work collaboratively with senior management on research projects and innovative initiatives. About You: You are an enthusiastic engineer who likes a challenge and has aspirations to further their career. Be a chartered civil or structural engineer (CEng and either MICE or MIStruct). Have good interpersonal and communication skills, ability to work independently, a collaborative approach and a proven ability to deliver work on time. Be confident working directly with clients, other design professionals, and contractors. Havestrong experience andbring a sound knowledge and understanding of structural engineering projects through your proven experience. You can demonstrate your abilities in producing drawings, specifications, calculations and technical reports. Have technical knowledge including use of industry-standard software (ideally Tekla/Robot) and basic ability with Revit. Have sound experience of commercial management of projects and change control. Be committed to encouraging good health and safety practices within the workplace and within design. Display enthusiasm, flexibility, and versatility as a team player. Be able to mentor, enthuse and support team members. Have a desire to build upon your existing experience, continuing your professional development with Tetra Tech. Hold a full UK Driving Licence. Have the ability to obtain UK security clearance. We offer opportunity and will support the successful candidate with furthering their career with Tetra Tech to fulfil their ability and aspirations.We offer clear career and development paths at all levels. About Tetra Tech: Tetra Tech is a leading provider of high-end consulting and engineering services for projects worldwide. We combine the resources of a global, multibillion dollar company with local, client-focused delivery in more than 400 locations around the world. We are Leading with Science to provide sustainable and resilient solutions for our clients. At Tetra Tech, we provide a collaborative environment that supports individual performance, innovation, and creativity. We are proud to offer competitive compensation and benefits. For more information on our company, please visit our website at. To apply, please submit your CV and cover letter on the Careers section of our website. Tetra Tech is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Tetra Tech is an equal opportunities employer and encourages applications from all suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, transgender status, religion or belief, marital status, or pregnancy and maternity/shared parental leave, in line with the Equalities Act 2010. We thank all applicants for their interest; however only those selected for an interview will be contacted. TPBN1_UKTJ

Based Hertfordshire A leading, established andhighly successful provider of mechanical and electrical installation services to commercial and industrial buildings seek the solid appointment of a skilled MechanicalProject Engineerfrom an M&E / Building Services mechanical installationprojectsbackgroundto join their exciting planned growth and continuedsuccess. You will be involved with projects that can range from £1.5M-£20M+ Those with any M&E installations experience in commercial and or industrial environments are of serious interest as a Mechanical Project Engineer or similar. We are looking to make an immediate appointment and this is a genuinely exciting time to be a part of this growth campaign. Candidates highly sought after are those naturally from an M&E / Building Services background, ideally with directworking experience in theproject deliveryof mechanicalinstallations you would expect to find in commercial and industrial settings. You will be responsible for supporting and enhancing the delivery of a project from a technical aspect. This role reports to a Project Manager or Contracts Manager and is both office and site based as necessary to support project requirements. You will becomefamiliar with all the project details, design and specifications whilst collatingtechnical submittals detailed by the Contracts / Project Manager and then manage this processliaising daily with suppliers, Site Supervisors, Project Managers, EHSQ Advisors and Subcontractors. You will manage site QA/QC procedures including the issuing of weekly and monthly QA/QC reports as well as managing, reviewing and coordinatingdrawings when requested as well as RFI's. Candidates sought will have experience in advisingand guidingsub-contracted staff on all technical aspects of projects and raise any technical requests for information required to complete the mechanicalinstallations. You will ensure compliance with all the site and project requirements, including operational health and safety obligations as well as performingtroubleshooting techniques to identify problems and apply corrective actions whilst managingdocument control to ensure all the logs are kept up to date. As a final, you will be skilled in creatinghandover packs and test packs for systems installed, ready for handover. Should you have this kind of experience, or certainly most of it, have a Bachelor Degree Level in Mechanical Engineering, Building Services OR a Mechanical trade background in a similar discipline, have a comprehensive understanding of tendering process', a working knowledge in MS Project, MS Office Suite and are willing to learn and adapt to different elements of a project, then we want to hear from you for immediate consideration. This award winning business prides itself in investing well in their people and you can be assuredthat you will have continued career development. Please send your updated CV through for immediate consideration and please ensure it is entirely up to date and shows evidence of any experience that applies to this great role. If you know someone who is a good fit for this position, then please forward them this job ad. TPBN1_UKTJ

Experienced Senior Quality Engineer required for established precision engineering company based in Plymouth. In this pivotal role, the successful candidate will be responsible for overseeing and improving our in-house quality systems, fostering a strong culture of quality across the organisation, and driving supplier quality improvement initiatives. You will work closely with cross-functional teams to ensure compliance with aerospace standards, identify areas for operational enhancement, and lead efforts to resolve complex quality issues. Your expertise will be crucial in implementing best practice that elevates product quality, ensure regulatory compliance, and drive continuous improvement across both internal and external processes. If you are passionate about quality excellence, mentoring teams, and making a significant impact in the aerospace industry with a forward-thinking business then we would like to hear from you! Key Responsibilities: In House Quality Oversight: Lead and manage the in-house quality assurance processes to ensure compliance with aerospace industry standards (e.g., AS9100, ISO 9001). Lead root cause analysis and corrective/preventive action (CAPA) efforts to address recurring quality issues. Develop and maintain quality control plans, procedures, and policies to ensure consistent product quality. Conduct regular audits of manufacturing processes, products, and equipment to identify areas of improvement. Oversee the management of non-conformance reports (NCRs) and corrective actions. Help to Embed quality culture as the guiding ethos across the whole organisation. Supplier Quality Management: Lead supplier quality improvement initiatives, collaborating with suppliers to ensure that parts and materials meet quality and regulatory standards. Conduct supplier audits and assessments to ensure they comply with contractual quality requirements. Work closely with the procurement and engineering teams to resolve supplier quality issues and improve supplier performance. Develop and implement supplier performance metrics and monitor ongoing performance. Quality Cultural Development: Foster a culture of quality within the organisation by promoting best practices and continuous improvement initiatives. Mentor and train team members on quality principles, tools, and techniques (e.g., FMEA, 8D, root cause analysis, SPC). Promote awareness of quality standards and regulations to all departments and stakeholders. Continuous Improvement: Identify opportunities for process optimization, cost reduction, and waste elimination while maintaining product quality standards. Lead and participate in continuous improvement projects such as Six Sigma, Lean, and Kaizen initiatives. Collaborate with cross-functional teams (Engineering, Manufacturing, Supply Chain) to implement process improvements. Risk Management: Assess and manage risks related to product quality, supplier performance, and compliance with regulations. Proactively identify potential quality risks and implement mitigation strategies. Essential Qualifications, Knowledge & Candidate Attributes Required: A First Class, Upper Second Class Bachelors Degree or Masters Degree in Quality Management or an Engineering discipline (e.g. Mechanical, Aerospace Industrial Engineering etc). Extensive experience working as a Quality Engineer with Manufacturing or Precision Engineering coupled with strong experience and knowledge of AS9100 and ISO9001. Experience leading quality improvement initiatives and process optimization in a manufacturing or production environment. In-depth knowledge of quality control techniques, such as SPC, FMEA, Root Cause Analysis, Corrective and Preventive Actions etc. Strong analytical thinking and problem-solving skills, particularly in identifying quality issues, conducting investigations, and implementing corrective actions coupled with expertise in non conformance management and audit processes. Excellent communication and interpersonal skills for working with cross-functional teams, suppliers, and senior management. Desirable Qualifications Lead Auditor certification for ISO 9001 or AS9100. Six Sigma Green Belt or Black Belt certification is preferred. Please note that our client does not have a Skilled Worker Sponsorship Licence therefore candidates who apply for this role must have immediate right to work in the UK. Due to the nature of the business, the successful candidate may require security clearance. If you are an experienced Senior Quality Engineer and are looking for the first step in your career, then please submit an up to date CV by using the apply button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service. TPBN1_UKTJ

Senior Cryogenics Engineer Culham Science Centre, Abingdon, Oxfordshire, United Kingdom Full-time Salary: £56,596 (inclusive of Specialist Allowance) + excellent benefits, including outstanding pension Division: Plasma Science and Fusion Operations Site Location: UKAEA Culham, Oxfordshire Confirmed Grade: Level 5 Department: Tokamak Systems Company Description By 2050, the planet could be using twice as much electricity compared to today. Are you interested in contributing and helping to shape the future of the worlds energy? If so, read on. Fusion, the process that powers the Sun and Stars, is one of the most promising options for generating the cleaner, carbon-free energy that our world badly needs. UKAEA leads the way in realising fusion energy, partnering with industry and research for ground-breaking advancements. Our goal is to bring fusion electricity to the grid, supported by tomorrow's power stations. In pursuit of our mission, UKAEA embraces core values: Innovative, Committed, Trusted, and Collaborative. As an employee of UKAEA, you will benefit from: • Outstanding defined benefit pension scheme, details of which can be found at the end of this advert - Corporate bonus scheme up to 7% and a Relocation allowance (if eligible) - Flexible working options , including family-friendly policies and the right to request flexible working from the start of your employment - Employee Assistance Programme and trained Mental Health First Aiders - Generous annual leave allowance , starting with 25 days, plus 3 days Christmas closure and 2.5 privilege days, in addition to UK bank holidays - Wide range of career development opportunities - A vibrant culture committed to equality and being fully inclusive What to expect in our recruitment process: For a step-by-step overview of how we hire from application to offer, please see our Recruitment Process page on our website. Job Description The salary for this role is £56,596 (inclusive of a Specialist Allowance). Onsite working is expected for 3 days a week, however, we actively support requests for flexible working. This role can be based at any of the following sites: Culham, Oxfordshire. This role requires employees to complete an online Baseline Personnel Security Standard (BPSS), including the Disclosure & Barring Service (DBS) check for criminal convictions and possibly a search of open source data. The Role Are you looking for an exciting opportunity to make a difference? Join our team and contribute to the future of fusion energy. As Senior Cryogenics Engineer, you will play a pivotal role in providing expertise to a small team working on significant projects, such as the STEP cryoplant and cryodistribution system, engaging with both commercial suppliers and cryogenics users across STEP to define the system requirements. The STEP Cryogenic System will be among the largest in the world, comparable to those at ITER and CERN. Additional Responsibilities: • Process and equipment design and selection - Design of P&IDs, heat and mass balances, and supporting documentation - The planning and performing of simulation analysis and validating analysis carried out by others - Presenting strategic reports to senior management; contributing to negotiations for resources and budget - Selection of design standards and the validation of designs against those standards, by computation or experimentation - Vendor management, including managing significant contracts - Engaging with industry and the wider cryogenics sector to drive innovative developments - Supervising and directing the work of junior engineers or students - Preparing papers for journals and conferences, presenting at seminars and conferences - Ensuring safety requirements are met Other duties that are reasonable and commensurate with this role may not be specifically referred to in this document. Qualifications Essential Requirements: • Degree or equivalent in Cryogenic, Mechanical, or Process Engineering, or an equivalent STEM subject - Extensive experience in cryogenics; this experience could be from a laboratory or an industrial setting - Modelling and simulation experience using CFD and thermal analysis with software, such as MATLAB Simulink, MATLAB coding, ANSYS, and/or COMSOL - Process engineering design of cryogenic systems using simulation tools like ASPEN HYSYS/PLUS, MATLAB, MATLAB Simulink - A good working knowledge of engineering materials and their properties - Excellent collaboration skills, including written, verbal, and interpersonal communication - Demonstrable ability to work and communicate with a multi-disciplinary team - Demonstrable understanding of modern project management tools and methodology Desirable Requirements: • Design, development, and construction of cryogenic distribution systems (cold boxes, valve boxes, transfer lines, heat exchangers) or equivalent - Design, specification, and selection of cryogenic/pneumatic/hydraulic system components (valves, compressors, pipes, instrumentation, pumps, turbines) or equivalent - Comprehensive understanding of process automation, instrumentation and control - Experience with relevant environmental factors such as plasmas, vacuum and transient magnetic fields - A solid understanding of modern standards in Quality Assurance, Safety, Health and the Environment Additional Information For a full list of benefits and to apply, select the apply button to be taken through to the UKAEA careers pages. UKAEA's mission is clean energy for all, and we welcome talented people from all backgrounds who want to help us achieve our mission. We are under-represented from some groups and so want to encourage applications in particular from women in STEM, people from Black British Caribbean and African backgrounds and from Pakistani and Bangladeshi British backgrounds. Our Executive team, supported by our 'Head of Equality, Diversity, and Inclusion' (EDI) and Wellbeing, and our EDI Networks actively promote inclusion and take steps to increase diversity within our organisation. We reinforce best practices in recruitment and selection and evaluate approaches to remove barriers to success. UK Atomic Energy Authority is committed to being accessible. Please email our team if you have any questions or require help or adjustments to compete on a fair basis, for example, changes to the way we interview or share information. Please note that vacancies are generally advertised for 4 weeks, but may close earlier if we receive a large number of applications. TPBN1_UKTJ

In a Nutshell We have a new opportunity for a Senior Engineer to join our team within Vistry North West Midlands, at our offices in Wolverhampton. As our Engineer, you will manage the technical matters relating to a number of projects or a single complex one and supervise the work of other team members in their own tasks. You will demonstrate a pro-active approach to design development, working within a team environment from the project's inception through to its completion. You will be tasked with the control of the complete design process involving the management of consultants, liaison with the relevant statutory and local authorities and other internal and external stakeholders as necessary. To ensure the designs complies to all necessary legislation, associated standards and Vistry Group specification, policy, and procedures. Your role requires an excellent base level of Health & Safety, Environmental and Technical knowledge, including a good working knowledge of the Highways & Drainage, Building Regulations, NHBC Standards, Planning, and Affordable Housing. We value in-person collaboration and team culture, but we're also committed to supporting flexible working where possible. We encourage you to raise any specific requirements during the interview process so we can explore how this could be accommodated. Let's cut to the chase, what's in it for you Competitive basic salary and annual bonus Company car, car allowance or travel allowance Salary sacrifice car scheme available to all employees Up to 33 days annual leave plus bank holidays increasing to up to 39 days with service 2 Volunteering days per annum Private medical insurance, with employee paid cover Competitive pension scheme through salary sacrifice Life assurance at 4 x your annual salary Share save and share incentive schemes Employee rewards portal with many more benefits In return, what we would like from you Behave in line with our company values - Integrity, Caring and Quality BTEC HND/HNC in Design, Construction or Civil Engineering Extensive experience working within a technical role at a residential house builder Good level of IT literacy with experience of AutoCAD, Outlook, Excel & Word Proven ability in a Technical Manager role, delivering design for projects on time, to budget and quality standards with high customer satisfaction results Excellent organization and time management with ability to multitask Commercially aware Ability to make decisions within authority Able to lead and work as a team member Experienced in analysing problems and delivering solutions Strong mathematical ability Be able to design and interpret the designs and technical demands of others Professional aptitude and appearance at all times Strives for continuous improvement for the benefit of the company Driven to achieve customer satisfaction Able to work under pressure, and accept criticism of work Be able to work effectively in a team-leader role Good level of communication skills, with the necessity to liaise with internal staff and external bodies Be practical and methodical with good analytical skills Willing to work extra to meet deadlines as and when the business needs require it Desirable Member of professional body e.g. ICE, CIAT, CIOB, MCIAT Principle Designer and associated Health and Safety training/ qualifications Use of Viewpoint drawing management system Proficient use of Auto Cad Management of technical fees and services cost to complete Continued professional development and keeping up to date with changes within the industry Experience of people management and project leading More about the Senior Technical Manager role Comply with Life of Site procedures. Undertake the Principal Designer role as defined within the Construction Design & Management Regulation 2015 and completion of all necessary Health, Safety & Environmental documents, in line with Group Policy & procedures. Ensure delivery of surveys & reports required for the development and manage associated requirements from design to completion. Manage the process of obtaining consultant fee proposals and formal appointment documents in accordance with Group procedures. Manage consultants to deliver the civil engineering designs including legal plans and the house type working drawing packs. Obtaining and collating all ancillary specialist drawings including hot water supply, heating, kitchen, stair, lintels, p.c. ground floors, and precast upper floors. Undertaking value engineering assessments and ensure buildability is considered. Ensure submission of designs and securing technical approvals for agreements such as S104, S38 & S278 followed by timely completion of legal agreements. Ensure utility designs and initial mains laying onto site, ensuring legal agreements completed in timely manner. Prepare all drawings and documents for engineering and superstructure elements for tender, followed by the construction issue and sales handover. Coordinate street naming with local authority, complete plot list and distribute internally and externally of the business. Where applicable obtaining Management Company quotations, reviewing, comparing, and providing the Planning, & Technical Directors with recommendation for appointments. Assist in production of Sales brochure, legal and sales handover meetings. Provide information for Housing Association contracts and attendance of progress meetings. Submission of all information to NHBC and obtaining approval of same, obtaining SAP Assessments together with PEA' and EPC's, and any other requirements. Attending and chairing Pre-Start Meetings and briefing all departments on matters related to the engineering and working drawings. Assist the Land, Planning & Development teams with advice during the land acquisition stage and assist in the information to discharge of planning conditions. To monitor and report technical & development fees including S106 obligations. Resolve all technical related queries including conducting site visits and site progress meetings as required. Finally, let's tell you a bit more about us We build more than homes, we're making Vistry. Being a responsible developer and award-winning employer means we live each day through our ethos - doing the right thing. Our behaviours reflect this, as well as our values of integrity, caring and quality. Shaping all we do; they empower us to develop sustainable communities across affordable and private housing. We work in a partnership-led way, and you'll recognise our renowned brands Bovis Homes, Linden Homes and Countryside Homes. Together with Vistry Works, our manufacturing operation, and the functional support of Vistry Services, we're a proud UK Green Building Council member, UK top five housebuilder with a five-star House Builders Federation (HBF) customer satisfaction rating, and winner of many awards including Top Employer, Global Top Inspiring Workplaces, and Best for Talent Attraction and Outreach. Join us in making Vistry. #LI-AD1 TPBN1_UKTJ

What Are We Looking For? Blackburn Starling & Co Ltd are looking for a Senior Engineer to join us on a permanent basis in our Nottingham office. Assisting in the design and delivery of projects across the UK. As part of our wider Design team, you will take on a leading role in all aspects of projects, from scoping and detailed design through to implementation, ensuring compliance with client specifications and current regulatory standards, with a strong focus on low-carbon solutions. Some of Your Key Duties Include: To manage all projects (including identification/management of risks and production/ monitoring of project programme) which are allocated to you and your team and to ensure the overall success of the Project within technical, programme and financial constraints. To communicate effectively, professionally and in a timely manner with internal personnel, external customers, consultants and subcontractors. To ensure that the detailed engineering design (mechanical & electrical), manufacture of product, testing, delivery, installation, commissioning and documentation meets the customers requirements and contract specification. To undertake the electrical design using the latest technology and preferred engineering techniques (e.g. compliance to BS EN 61439-2 etc.) to maximise efficiency. To attend weekly and/or monthly Senior Project Engineers Review Meetings and be an active participating member of improving the operational aspects of the Department, and the business in general. To produce project reports on a monthly basis (prior to the Senior Project Engineers Review Meetings). Prepare technical specifications (and drawings) for sub-contract equipment and participate in supplier tender assessments/negotiations with the Engineering/Commercial Manager. To ensure that variations/deviations are issued to the customer as soon as they occur and that information and associated work are processed internally and externally. This includes preparation of cost estimates for submittal to clients to recover any changes/variations. What Do You Need? Qualification to degree / HND/ HNC in Electrical Engineering. Proven track record in manufacturing experience. Experience with LV Switchboard design. A good technical knowledge of Electrical Control Engineering (e.g. MCC/control panels, control systems etc.) and the industrial applications. Full UK Driving Licence. Blackburn Starling Who Are We? Blackburn Starling & Company Ltd, founded in 1870, are a well-established and reputable leading manufacturer of reliable high-quality low voltage assemblies and control systems. The Company operates a customer focused, strong people-first culture, supplying a global market through industrial verticals including Aggregates, Energy from Waste, Oil & Gas (including on-shore and off-shore), Nuclear, Power Distribution, Process Industries, Solar Storage, Transportation & Water. Blackburn Starling are part of the RSE group of companies, operating within the Power Distribution & Controls business stream. RSE is the leading contractor of choice in the design, build & maintenance of water treatment & water recycling equipment. Delivering products and services to clients across the UK, RSEs unique offering to the market focuses on innovation, efficiency, and excellence. What We Offer To build successful teams and drive the level of quality that Blackburn Starling is renowned for, we know we need the best people in the industry. Not only do we require the relevant skillsets, but we also need people with the right attitude and mentality to thrive and grow in such an innovative industry. At Blackburn Starling, youll be given every opportunity to set the path of your career through our Business Streams and work in an environment that will require you to rise to the challenge of working for a market leader. Industry-leading salary dependant on experience. Car allowance. A flexible career development path, with no restrictions on where your career can go. Holiday allowance of 25 days plus Bank Holidays. Company Pension Scheme. Access to our network of health professionals including Mental Health Champions and Occupational Health Nurse. In a flourishing sector where there are vast career opportunities available, we believe our niche offering to the market means our people have the space to thrive and innovate our industry. If youre interested in a career with a company that will harness your skills and provides you with the support to create your future, then please apply. Were excited to take you on the journey and continue to grow as the UK water industrys contractor of choice. TPBN1_UKTJ

Mechanical Engineer (Level 3) Location: HMP Swaleside Brabazon Road, Eastchurch. Isle of sheppy ME12 4AX Salary: £43,177.30 Contract: Full time | Permanent We are seeking an NVQ level 3 qualified Plumber to join our team at HMP Swaleside, a CATEGORY C & Male PRISON - as a Mechanical Engineer. Join a team that is more than just a group of colleagues - we work Monday to Friday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Swaleside runs like a self-contained TOWN, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As a Mechanical Engineer you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Plumber to join us as a Mechanical Engineer with one of the following NVQ Level 3 qualifications and combination of skills: • C&G 6189 Plumbing and domestic heating * C&G 5962 certificate in Plumbing (Advanced craft) * C&G 6019 Mechanical Engineering services (plumbing) * C&G 6018 heating and ventilation installation * C&G 6129 certificate in Plumbing * C&G 214 Engineering systems maintenance * C&G 6188 Heating and ventilating * C&G 6088 certificate in heating and ventilating * C&G 6032 the advanced craft certificate in plumbing * EAL Diploma in Plumbing and Heating * Experience working on commercial or industrial heating, water or building service systems. * Unvented water heater vessel course G3 - Highly desirable * Two years' experience working in a role as a plumber or equivalent * Be familiar with and able to work to Water supply regulation and Control of Legionella L8 requirements * Good working knowledge of planned preventive maintenance operations * Good working knowledge of relevant health and safety requirements * L8 awareness training - Desirable (Provided if required) If this sounds like you, we would like to hear from you! Explore a varied and rewarding career at GFSL. Welcome to careers at Gov Facilities Services Limited (GFSL). Joining us is your chance to help ensure prisons are secure and safe for prisoners and prison staff alike, and to play your part in helping prisoners reintegrate into society. Holidays are 25 days per year plus Bank Holidays, and a range of non-contractual benefits are provided. These range from Death in Service at 4x salary, to access to private GP consultations and an Employee Assistance Programme that offers counselling and information services for preventative care and to help employees in a crisis. There are also a range of financial reward mechanisms and access to retailer discounts. You will find a strong focus on safety, a supportive, inclusive workplace, a competitive benefits package, and real opportunity to build your skills and progress. Explore facilities careers where you can make difference. Pride In People. We're passionate about promoting greater diversity and creating a workplace and culture where all of our employees have a voice that is heard, feel a sense of belonging and are empowered to be their true selves. We recognise the value that every single employee brings to the organisation. Everyone's needs at work are different and we are committed to doing our best to satisfy these differences whilst ensuring consistency and fairness for all. We promise to champion diversity and inclusion with ongoing learning and training, as well as career progression opportunities for everyone. Future Plans. GFSL has been notified by it's shareholder (MOJ) that the provision of FM Services will in future be delivered by the private sector. This means that following a successful procurement process, GFSL's services will complete transfer to a private sector provider/providers no sooner than August 2027. Pride in People - Do the Right thing - One Team An ISO 9001 Certified Company TPBN1_UKTJ

Senior Technologist - Optical Systems Ormskirk, West Lancashire Up to £55,000 + 25 Days Holiday + Bank Holidays + Bonus (up to 20%) + Private Healthcare + Pension + Holiday Salary Exchange + Cycle to Work Scheme + Onsite Parking & EV Charging + Onsite Canteen Excellent opportunity for an Optical Systems Engineer to join a global manufacturing group, working with state-of-the-art technologies to develop advanced inspection and measurement solutions used across international production sites. This company are a worldwide leader in their field, operating across architectural, automotive and specialist glass technologies. Their Process Control team plays a key role in developing, deploying and supporting inspection and metrology systems that feed critical data into global manufacturing execution platforms, underpinning quality, performance and process optimisation. In this role you will work across the full lifecycle of automatic inspection systems - from concept and design through to implementation, deployment and ongoing support. You'll create and enhance optical and measurement solutions, develop software (including algorithms and image processing), and work with a mix of legacy tools and modern high-level languages. You'll partner closely with R&D and production teams, provide both on-site and remote technical support, carry out technical assessments of new technologies, and occasionally travel overseas to support global sites. The ideal candidate will have a strong background in optical systems, industrial metrology or precision measurement, alongside experience developing inspection software (e.g. image processing, algorithm design, C# or similar languages). You'll combine hands-on lab skills with strong problem-solving abilities, excellent communication, and solid project/time management. A 2:1 degree or higher in a STEM subject and several years' relevant industry experience are essential. This is a fantastic opportunity to join a highly technical team within a global organisation, work at the forefront of inspection and process control technology, and directly influence product quality and manufacturing performance across worldwide operations. The Role: *Creating and enhancing automatic inspection systems from concept through to implementation *Developing optical / measurement solutions, algorithms and inspection software (incl. image processing, C# or similar) *Delivering and supporting inspection systems and instruments across global manufacturing sites (on-site and remote) *Assessing new technologies in inspection & process control and contributing to continuous improvement initiatives The Person: *2:1 degree or higher in a STEM subject + 5+ years' relevant experience *Experience with optical systems, industrial metrology and precision measurement techniques *Software development experience (e.g. algorithm design, image processing, C# or similar), with strong experimental/lab skills *Excellent communication, high attention to detail and strong project/time management; willing to undertake occasional overseas travel Reference Number: BBBH266794 To apply for this role or to be considered for further roles, please click 'Apply Now' or contact Tommy Williams at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates. TPBN1_UKTJ

Senior Controls Engineer Our client, a manufacturing market leader in their field, are seeking aSenior Controls Engineer to join their team. This is a full time, permanent position, based in Gt Yarmouth. Skills, Experience & Attributes Required: Strong background in machine commissioning and electrical/control systems engineering. Commissioning and testing of automated machinery. PLC Programming (Beckhoff TwinCAT preferred). Electrical CAD and BoM management. Fault finding and troubleshooting in electrical and pneumatic circuits. Documentation creation ( FAT/SAT, compliance, commissioning standards) . Senior technical authority process ownership. Hands-on when needed but primarily focused on process leadership and technical standards. Organised, detail-focused and committed to delivering reliable machinery. Effective communicator with internal teams (service, production, design). Aims of the role: Deliver machines to service team in a fully tested, documented and compliant state Ensure documentation accuracy and ownership, including commissioning guides, compliance documents and test standards Act as the technical authority for commissioning and controls systems Manage supplier relationships relating to control system components, obsolescence and returns Maintain awareness of the financial and operational impact of engineering decisions Continuously develop expertise in control systems safety and compliance standards Key Responsibilities Include: Lead and manage the commissioning process for all machines, ensuring machines are fully tested and validated before handover. Create, maintain and own all commissioning documentation including standards, templates, FAT/SAT forms, fault-finding guides and handover packs. Run shakedown procedures and benchmark performance testing for all machines, including customer-specific profile testing when required. Ensure safety, compliance and quality standards are met, signing off control systems for UKCA conformity. Provide guidance and mentoring to production and commissioning staff, ensuring commissioning procedures are correctly followed. Interface with the Service Department to ensure clear, accurate handovers and technical back-up when required. Step in hands-on to perform commissioning, troubleshooting, or on-site support when necessary. Provide expert input into continuous improvement , feeding back design and production improvements to engineering and QA teams. Electrical CAD design, maintaining circuit diagrams, BoMs, templates and part libraries. Manage component obsolescence and supplier returns, ensuring sufficient supply chain solutions and warranty recovery. Support PLC programming and software updates (Beckhoff TwinCAT, TwinSAFE), including minor updates and testing of new features. Contribute to the development of new products and upgrades , working with the Technical Director on control systems innovations. Aid in parts identification for service when needed. About the Role: Responsible for leading and managing the commissioning of machinery. Ensuring all machines are thoroughly tested, documented and compliant before handing over to the Service Department. The role also provides expert technical authority in control systems design, PLC programming, electrical documentation and supplier component management. Benefits: 25 Days holiday, plus bank holidays Pension Scheme Healthcare scheme Todd Hayes Ltd is an equal opportunities employer. Due to the large number of applications we receive Im afraid we are unable to respond to everyone individually however your details will remain on file should another suitable opportunity become available moving forward. If we can take your application further we will of course be in touch. Todd Hayes is acting as an Employment Business in relation to this vacancy. Todd Hayes Ltd IDN1 TPBN1_UKTJ

Experienced Automation Engineer required for global manufacturer based at their site in Plymouth. In this pivotal role, the successful candidate will provide day-to-day support for moulding equipment controls, software, and systems to ensure production continuity. You will also lead the sites journey into Automation, driving improvements in safety, efficiency, quality and compliance. You will play a key role in developing and delivering the clients Automation strategy, ensuring existing systems remain reliable, validated and compliant with ISO9001 and other global standards. Key Responsibilities: Controls & Support: Fault-finding, maintaining, and improving control systems (Allen Bradley, Omron, Siemens). Provide rapid response to breakdowns, ensuring permanent resolutions are implemented. Maintain site control of all software, system specifications, and version control. Compliance & Validation: Conduct software and process validation for new and existing equipment in line with ISO9001 and other regulatory standards. Ensure all changes follow robust change control and are fully documented for audit readiness. Continuous Improvement:; A Proactive mindset in order to deliver process improvements to increase OEE, reduce waste, and strengthen product quality. Identify risks from obsolescence and lead mitigation or upgrade programs. Share knowledge and upskill colleagues to build internal capability in automation and controls. Essential Qualifications, Skills, Experience & Candidate Attributes Required: A minimum of a HNC in Electrical / Control / Automation Engineering. Proven experience working as an Automation Engineer programming and fault-finding on PLC and equipment within a Manufacturing or Engineering environment. A proven track record of delivering automation or controls projects in a regulated manufacturing environment (medical, food, aerospace or similar). Experience of process and product validation. Strong understanding of control systems, networks, and HMIs. Knowledge of software lifecycle management and change control. Strong organisational skills with the ability to communicate effectively at all levels. Balance of hands-on support and long-term project delivery. A flexible approach to working hours. The successful candidate will be required to work a static day shift comprising of Monday to Thursday 08:30 to 17:00 and Fridays 08:30 to 14:30. Please note; this client does not possess a Skilled Worker Sponsorship licence, therefore only candidates who have the immediate right to work in the UK will be considered. If you are an experienced Automation Engineer & are currently looking for a new challenge, then please submit an up-to-date CV by using the apply button below. By applying for this position, you confirm that you consent to the processing of your personal data in accordance with the General Data Protection Regulation (GDPR) for the purposes of recruitment, employment and working finding service. TPBN1_UKTJ

MTrecs new career opportunity Our client are specialists in their industry sector, they are looking to recruit a Multi Skilled Maintenance Engineer on a permanent basis. It is essential candidates are flexible to work a 3 shift pattern. The Job youll do Diagnosis and repair of special purpose equipment and make sure it works correctly. Formulation and execution of effective (value added) planned maintenance (PM) to prevent disruption of activities. Prioritisation, validation, and completion of maintenance requests. Control of Inventory using engineering database. Pilot key equipment using maintenance key performance indicators (KPIs) to formulate and execute improvement action plans. Mentor and support to maintenance apprentices. Capture of comprehensive maintenance data for equipment history and lessons learnt purposes. PLC fault finding using PLCs for remedial actions and process improvements. Coordinate with maintenance engineering department for external modifications and future installations. Support improvements identified through the Red Tag and 6S process. Shift handovers must be completed. Support a culture of change and improvement within the engineering department. About You Must have served a recognised Apprenticeship and Educated to HNC or equivalent in electrical or mechanical engineering with a minimum of 3 year`s post Apprenticeship experience with strong mechanical and electrical maintenance experience in heavy plant and machinery. Must be able to read Mechanical and Electrical drawings for fault finding purposes. Having experience of working with hydraulics and pneumatics is a must. Basic fabrication skills are advantageous. The use of testing equipment. Knowledge PLCs ladder logic and structured text. Good IT skills using Microsoft packages Word, Excel, and Outlook. PLC, Siemens S7 Advantageous. Mechanical, hydraulic pneumatic maintenance and fault-finding skills Very strong with electrical fault-finding using HMI fault codes. Root cause analysis. 18th Edition wiring regulations. Be flexible to work 3 shifts including nights, as well as overtime when required. The Rewards and the benefits Working for a regional employer of choice. Permanent job. Competitive pay rate. TPBN1_UKTJ

About The Role Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in a friendly, fun and respectful environment where you are encouraged to thrive. Where will you be working? MEICA and capital maintenance - Our Mechanical, Electrical, Instrumentation, Control & Automation (MEICA) experts offer a one-stop solution, including ongoing operation and maintenance services. What will you be doing? As a experienced Electrical Engineer this is your opportunity to join a world-class cell & gene therapy organisation, where your expertise will support life-changing medical advancements. Enjoy a 4 on / 4 off shift pattern (7 AM - 7 PM) Earnings Boost with Overtime Premiums: Weekdays: 9.5 hours at standard rate + 2.5 hours at time & 1/3 Saturdays: 11.5 hours at time & 1/2 Sundays: 11.5 hours at double time! Requirements: As an Electrical Shift Engineer, youll play a crucial role in ensuring the smooth operation of a high-tech biopharmaceutical facility. You will be responsible for: Planned & Reactive Maintenance Conducting electrical maintenance across the site to ensure all equipment and systems run efficiently Fault Finding & Repairs Diagnosing and repairing electrical issues to minimise downtime Compliance & Safety Ensuring all work is carried out in line with safety regulations and GMP (Good Manufacturing Practice) standards Working with Critical Systems Maintaining essential infrastructure such as power distribution, lighting, control panels, motors, and emergency systems Collaboration Working alongside mechanical engineers and other technical teams to support the facilitys operation Whats in it for you? 25 days annual leave plus bank holidays Recommend a friend get rewarded for introducing people to us! Matched or contributory pension scheme Employee Assistance Programme My Rewards portal, access to 1000s of retail discounts Life assurance Cycle to work scheme About us We want to be an employer of choice and a great place to work, attracting diverse and talented people, who join us and make a difference. We are one of the Top 100 UK companies actively supporting and recruiting army veterans. Our ENABLE inclusion networks bring together people who have a shared passion, to help create an environment where everyone belongs. Our values help to shape our culture and how we work with one another. We recruit with these values in mind, to ensure your aspirations, and ways of working, align with ours. Were responsible and go further for our people, clients, communities and the planet Were open and seek new and better ways of exceeding expectations Were together and as one team; the whole is greater than the sum of the parts Were ambitious and embrace opportunity, to lead essential infrastructure services for life Whether youre a trainee, apprentice or graduate, or progressing through your career, our people benefit from industry recognised programmes, training and development. Its an exceptional time to be a part of M Group. Please note: Occasionally, job adverts might be closed before the stated closing date. Do apply as soon as possible to ensure your application is considered. For certain roles, successful candidates will be subject to 3rd party background checks as part of the hiring process. Some roles require drug and alcohol testing as part of induction and onboarding. #MGroupW INDSTA TPBN1_UKTJ

Position: Electrical Project Engineer Location: Bristol Salary: £60,000 - £70,000 DOE My client is a leading Engineering Service Provider managing high-profile contracts within the FMCG sector across the UK. They are seeking a Electrical Project Engineer to take ownership of complex, multi-site projects. This is a high-impact role for a technically exceptional individual with strong commercial acumen, leadership skills, and proven expertise in delivering electrical projects to the highest standards. The successful candidate will combine advanced technical knowledge with strategic oversight, guiding projects from inception to completion, managing teams and subcontractors, and maintaining exceptional client relationships. Mechanical Project Engineer Job Overview Lead the full lifecycle of commercial electrical projects, ensuring delivery on time, within budget, and to the highest quality standards. Prepare comprehensive project quotes, balancing materials, labour, and resource requirements while identifying opportunities for efficiency and cost optimisation. Design, configure, and optimise control system architecture, including PLC, HMI, and SCADA software (Siemens or Allen Bradley). Oversee the installation, commissioning, and troubleshooting of control panels and electrical systems. Mentor and supervise engineering teams and subcontractors, fostering high-performance and accountability on site. Drive continuous improvement initiatives and ensure all projects comply with relevant health and safety standards. Manage project budgets, schedules, and resources with strategic oversight, liaising closely with clients and stakeholders Mechanical Project Engineer Job Requirements Degree, HND, or HNC in Electrical Engineering (or equivalent) Extensive experience in control panel design, electrical installation, and commissioning Strong commercial project management experience Proven experience with PLC software development (Siemens or Allen Bradley) Experience with FMCG / Pharmaceutical production environments IOSH / NEBOSH qualified would be beneficial Excellent leadership, communication, and stakeholder management skills Full UK driving licence and the preparedness to travel as required Mechanical Project Engineer Salary & Benefits £60,000 - £70,000 depending on experience Mileage paid 28 Days holiday inclusive of Bank holidays Mon - Fri: 08:00 - 17:00 Pension Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy. Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries. We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for. TPBN1_UKTJ

Job Title: Fire Engineer Area: Thetford Shift Pattern: Monday to Friday (Days) Permanent Salary: Up to £65,000 PA One of our prestigious clients is looking for a Fire Engineer to join a team involving projects at all stages. You will provide design and coordination support, peer reviews, and fire risk advice on various building and engineering projects, whilst supporting the contractor with site checking, verification, and validation Responsibilities Identifying design fire-related risks and reducing or eliminating them. Production of designs, calculations, sketches and/or diagrams to help prevent fire or fire spread, including production of fire strategy reports across all RIBA work stages. Advising the wider design team on integration of fire safety requirements into designs, including advice that informs decisions on safe building occupancy levels, fire evacuation plans etc. Undertaking risk and opportunity reviews of employers requirements information at preconstruction stage relating to fire safety and fire design, such as fire suppression systems, risk assessments, reviewing plans and layouts to verify if appropriate consideration has been given to fire safety. Undertaking site visits and technical inspections to verify and validate the installation or implementation of the design outputs relating to fire safety. Liaising with local authorities, fire authorities, and insurers and building control professionals to ensure compliance with all regulatory requirements. Fire modelling experience will be beneficial. Whilst it is not intended for the role to involve full computational modelling and fluid dynamics, a working knowledge of the calculation process is essential, to define performance requirements to be implemented through design work by others. Be a role model to all staff in terms of character and work ethic to ensure acceptable working practices and procedures. Key Skills Recognised fire safety and engineering guidance and Codes of Practice, e.g. BB100, BR187, BS 8629, BS 9990, BS 5839, PAS8671 (Flex), BS 8579, Building Regulations Approved Document Part B, BS9999, and similar. Have Knowledge of recognised fire engineering CFD (fire & smoke modelling) and CEM (evacuation modelling). Experience Minimum 5 years post graduate experience in the UK working across a wide range of construction sectors. Fire engineering degree, or alternatively a post graduate qualification in fire engineering. Registered fire risk assessor within a recognised professional body. I you are interested and want to hear more information, contact David Steel On 01842820409 or email me on Skills Required BB100, BR187, BS 8629, BS 9990, BS 5839, PAS8671 (Flex), BS 8579, Building Regulations Approved Document Part B, BS9999, and similar CEM (evacuation modelling). Qualifications Required Fire engineering degree Registered fire risk assessor Keywords #Building Regulations#Approved Document Part B, BS9999, and similar CEM (evacuation modelling)#Fire Engineer, TPBN1_UKTJ

Electrical or Mechanical Maintenance Engineer FM Service Provider Commercial Building Maidenhead, Berkshire - Single Man site £45,000 per annum CBW Staffing Solutions are currently recruiting for a M&E Multi Skilled Maintenance Engineer to be based in a prestigious Residentialbuilding based Maidenhead. This building was built in 2013 and is next to maidenhead station that includesthe Elizabeth line great for people commuting from London. The site offers gyms, great coffee shops to make your morning better and shops to grab a quick drink. if you are feeling hungry there are restaurants availableto fuel you for the day. The successful candidate can be electrically or mechanically qualified with a proven track record in commercial/residentialbuilding maintenance. Package: £45,000 Monday to Friday 8am to 5pm Career progression Training provided 26 days + bank holidays 3% pension Over Time opportunities Parking on site Key duties & responsibilities Oversee the installation, testing, and commissioning of mechanical and electrical systems, including HVAC, domestic water services, drainage, lighting, power, fire alarms, and life-safety systems. Ensure all M&E works comply with design drawings, specifications, Building Regulations, British Standards , and relevant health & safety legislation. Coordinate M&E activities with main contractors, subcontractors, and consultants to ensure smooth integration with architectural and structural works. Carry out regular site inspections and quality checks , ensuring works are installed to the required standard and rectifying defects promptly. Monitor and manage programme milestones , identifying risks to progress and implementing corrective actions to maintain delivery schedules. Support the testing, commissioning, and handover process, including witnessing tests, reviewing certification, and ensuring O&M manuals and as-built drawings are complete. Manage and resolve technical queries (RFIs) and provide engineering solutions to on-site issues. Ensure effective commissioning coordination across all M&E disciplines to achieve compliance and system performance. Promote and enforce health, safety, and environmental best practices on site, including compliance with CDM regulations. Liaise with utility providers, local authorities, and statutory bodies as required for service connections and approvals. Assist with cost control and value engineering , identifying opportunities to improve efficiency while maintaining quality and performance. Support defect rectification during the snagging and defects liability period . Requirements: Electrically or Mechanically qualified - Level 2 or 3 City & Guilds - 18th Edition Job logic experience (Preferred) Must be able to provide copies of your trade certificates A proven track record in commercial building maintenance Good communication and customer service skills TPBN1_UKTJ

Term: Full time, Permanent Location: On site Hours of employment: 08:30 to 16:50, Monday to Friday Description of the role: As our Electrical Engineer, you will play a key role in maintaining, installing, and improving electrical systems across our process plant environment. You will be responsible for troubleshooting equipment breakdowns, ensuring compliance with industry standards, and supporting ongoing improvements to reliability, efficiency, and safety. Working closely with the production and engineering teams, you will help to deliver a safe and reliable operation across the site. Responsibilities: Install, commission and maintain LV electrical systems in a process plant environment. Troubleshoot and repair breakdowns on electrical equipment including motors, inverters, control panels and lighting systems. Maintain and support solar power generation systems ensuring optimal performance and reliability. Conduct preventive and corrective maintenance on plant electrical infrastructure. Work safely and effectively in ATEX-classified hazardous areas, complying with regulations. Inspect, test and verify electrical installations in accordance with industry standards. Support electrical design modifications, upgrades and process improvements. Collaborate with production to improve reliability and performance. Maintain accurate maintenance and compliance documentation on the CMMS system. Required Skills and Experience: Proven experience with LV electrical systems in industrial or process plant settings. Skilled in installation, maintenance and troubleshooting of solar PV systems. Competent with motors, inverters, lighting systems and electrical control panels. ATEX competency certification for working in hazardous areas. Strong electrical fault-finding skills under pressure. Familiar with PLC systems (Siemens, Allen-Bradley or similar). Good knowledge of electrical safety standards, regulations and best practices. Ability to read and interpret electrical schematics and technical drawings. Qualifications: A recognised Electrical Engineering qualification (HNC/HND, NVQ, or equivalent) is required. 18th Edition Wiring Regulations (BS 7671) certification is desirable. Experience with advanced PLC programming and integration is desirable. Knowledge of energy efficiency systems and electrical optimisation is desirable. Salary: £30,000 - £35,000 per annum Benefits: Generous company pension Minimum 31 days' holiday (including bank holidays) Life insurance Enhanced maternity/paternity Free onsite parking Friendly place to work Long-term service benefits including extra holidays and private medical insurance About ReAgent Chemical Services Limited ReAgent is a family-owned chemical manufacturer and supplier founded in 1977. We are a dynamic, ambitious, and fast-growing company with a friendly company culture. Our core values are to provide industry-leading customer service and high-quality products and ensure that everyone who works at ReAgent is happy. Just a few of the ways we do this is through open and honest communication, regular social events, and being a Living Hours and Living Wage Employer. TPBN1_UKTJ

Building a sustainable tomorrow BAM Infrastructure is looking to recruit an experienced and motivated Section Engineer to join our Scotland team, delivering a diverse range of projects within the renewable energy sector, including work on the ASTI and RIIOT2 frameworks. This is a unique opportunity to play a key role in the development of critical energy infrastructure, including the construction of new substations that will help drive Scotlands transition to Net Zero. We have vacancies across several locations in Scotland, including Kilsyth, Inverness, Argyll, Orkney, and Dounreay. In addition, we are recruiting for Section Engineers to support our work on the Eastern Green Link 2 (EGL2) project in Peterhead. EGL2 is a landmark development involving the installation of a 525kV, 2GW HVDC subsea transmission cable connecting Peterhead in Scotland to Drax in England. BAM Nuttall will be delivering the engineering works for the projects two converter stations. Your work environment BAM operates a flexible working policy People are at the heart of what we do at Bam. We recognise that creating a diverse and inclusive environment that nurtures our employees and encourages them to bring their best and whole self to work is crucial. We're on an exciting journey to get us there by recruiting the very best talent to join us regardless of race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. Your mission As a Section Engineer, you will be responsible for the following: Set a high personal example of safety and environmental behaviour. Communicate with foremen and gangers to ensure full understanding of information provided. Confirm in writing any verbal instructions received from the client/designer / REs staff and ensure that comprehensive records of resources employed on additional works are maintained. Arrange formal checking of setting out and ensure check request form is completed. Ensure reasonable survey book standards and daily diaries are maintained by engineers. Ensure that inspection and test plans are completed and digitally recorded. Prepare 4 weekly programmes in conjunction with the section foreman. Monitor 4 weekly programme, mark up progress for review at the weekly site review meeting. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary. Carry out material take off and requisitions as requested by the sub agent/agent. Ensure all delivery tickets are cost-coded and passed to finance team for processing. Ensure that testing/sampling of materials is carried out as required by the specification. Supervise chainperson, assistant and site engineers. Monitor the work to ensure that any unsafe work conditions and non-compliance with company policies and procedures are promptly remedied. Maintain good working relations with client/designer / RE, together with our supply chain. Ensure that the 3D information drawings and specification documents contain sufficient, accurate information for the construction of the works, and formally request any missing information. Who are we looking for? Degree, HND in Civil Engineering or equivalent NVQ Level CSCS Level - Academically or Professionally Qualified Person/Supervisory/Manager SSSTS The following are desirable requirements: Successful experience at site engineer level Qualified to ICE Technician or Incorporated (preferred) level or equivalent Whats in it for you? Competitive salary A wide range of family friendly policies Company car / car allowance / travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development BAM Infrastructure is also committed to equality of opportunity in all its employment practices, and to developing policies that support work-life balance. Who are we? The art of building is about building for communities; its about building for life. Where others stop, we go further, leading the way towards a sustainable tomorrow for us and future generations. As an industry leader, we raise the bar. Our values: sustainable, inclusive, collaborative, reliable and ownership, enable us to achieve our ambitions. Today, tomorrow and every day. Our recruitment process BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you. TPBN1_UKTJ

PROJECT ENGINEER SOUTHAMPTON OR SWINDON OR HYBRID We are currently recruiting for a Project Engineer to join our multi-disciplinary engineering team to deliver multiple P removal schemes across the Wessex Water region. This role will report to a Project Manager, and the candidate will be responsible for supporting the project team with the procurement, installation and handover documentation for all electrical and mechanical aspects of the project delivery. Candidates ideally will be qualified in Electrical or Mechanical Engineering, and have some experience of working within the water industry would be beneficial. The successful candidate would be predominantly site based in the Wessex Water region, with a requirement to attend our Southampton Head Office or our new Swindon Office, when required. Options for hybrid working are open to discussion. Role & Responsibilities: Collaborate with all stakeholders and engage with regular communications Attend internal and external meetings Collaborate with internal and external design teams with input to design and constructability Supervision and recording of survey work Responsible for the development and management of project procurement schedules Aid with the submission of material enquires and the review of quotations Placement of material orders Ensure that site installation works and its quality match both design, client and industry standards Production of redline drawings Production and management of handover documentation Assist with the development of Risk Assessments and Method Statements Employ a high level of Health and Safety across all aspects of site works Qualifications/Competency: Degree or HND/HNC in Electrical or Mechanical Engineering OR by experience ECS/CSCS card SSSTS First Aid Experience of working within the water industry or related industries Working Knowledge of Health, Safety and Environment Having an understanding of Quality Assurance Proficient in Microsoft Office About Trant: Trant Engineering Ltd has a long history of engineering and construction excellence, delivering high quality EPC engineering and construction services throughout the UK and overseas. We successfully deliver complex turnkey engineering projects within the Process & Water, Energy and Defence sectors. Our in-house multi-disciplinary services include civil, process, mechanical, electrical, instrumentation, control and automation, supplemented by the design and manufacture of Control Panels, MCCs, PLCs, SCADA and automation systems. We have over 1000 employees and a healthy forward order book with a targeted turnover of £150m this year, it is an exciting time to join the business. Benefits: At Trant, we offer the opportunity for career development and progression within a professional working environment, and we strongly support and encourage employees to gain professional qualifications. Our company benefits package includes; A competitive salary Company car or car allowance 24 days holiday (increasing with service) + 8 bank holidays Company Pension Scheme 1 x Professional qualification paid Employee Assistance Programme 24/7 Discounted corporate gym membership Bike to Work Scheme Equal Opportunities: Trant Engineering Limited is committed to equal opportunities for all and we do not discriminate on the grounds of race, religion or belief, sexual orientation, gender reassignment, marital or civil partner status, gender, disability or age TPBN1_UKTJ

Mechanical Engineer (Level 3) Location: HMP LEWES, 1 Brighton Road, Lewes, BN7 1EA Salary: £43,177.30 Contract: Full Time | Permanent We are seeking an NVQ level 3 qualified Plumber to join our team at HMP Lewes, a CATEGORY C & Male PRISON - as a Mechanical Engineer. Join a team that is more than just a group of colleagues - we work Monday to Friday as a supportive and driven family, working together to create a safe and nurturing environment. HMP Lewes runs like a self-contained TOWN, it takes hundreds of people to keep it functioning, and as the Facilities Maintenance Team we are committed and driving the smooth and safe operation, like a heart that pumps blood through the body, everything we do impacts every prisoner, employee, and visitor, and wider to the families and community. As a Mechanical Engineer you will have the opportunity to work alongside experienced and passionate colleagues who vary from Plumbers, Electricians, Carpenters, Painters, to Cleaners, and Administrators, and others, who are all dedicated to making a positive difference, providing a safe and secure environment for all. If you are looking for a role where you can use your skills to create a better future for others, we encourage you to apply for this compelling opportunity and join us in our mission to promote rehabilitation and positive change and be part of a team that truly makes a difference. We are a Ministry of Justice business and provide critical and time-bound services to HMPPS, and are looking for a Plumber to join us as a Mechanical Engineer with one of the following NVQ Level 3 qualifications and combination of skills: • C&G 6189 Plumbing and domestic heating * C&G 5962 certificate in Plumbing (Advanced craft) * C&G 6019 Mechanical Engineering services (plumbing) * C&G 6018 heating and ventilation installation * C&G 6129 certificate in Plumbing * C&G 214 Engineering systems maintenance * C&G 6188 Heating and ventilating * C&G 6088 certificate in heating and ventilating * C&G 6032 the advanced craft certificate in plumbing * EAL Diploma in Plumbing and Heating * Experience working on commercial or industrial heating, water or building service systems. * Unvented water heater vessel course G3 - Highly desirable * Two years' experience working in a role as a plumber or equivalent * Be familiar with and able to work to Water supply regulation and Control of Legionella L8 requirements * Good working knowledge of planned preventive maintenance operations * Good working knowledge of relevant health and safety requirements * L8 awareness training - Desirable (Provided if required) If this sounds like you, we would like to hear from you! Explore a varied and rewarding career at GFSL. Welcome to careers at Gov Facilities Services Limited (GFSL). Joining us is your chance to help ensure prisons are secure and safe for prisoners and prison staff alike, and to play your part in helping prisoners reintegrate into society. Holidays are 25 days per year plus Bank Holidays, and a range of non-contractual benefits are provided. These range from Death in Service at 4x salary, to access to private GP consultations and an Employee Assistance Programme that offers counselling and information services for preventative care and to help employees in a crisis. There are also a range of financial reward mechanisms and access to retailer discounts. You will find a strong focus on safety, a supportive, inclusive workplace, a competitive benefits package, and real opportunity to build your skills and progress. Explore facilities careers where you can make difference. Pride In People. We're passionate about promoting greater diversity and creating a workplace and culture where all of our employees have a voice that is heard, feel a sense of belonging and are empowered to be their true selves. We recognise the value that every single employee brings to the organisation. Everyone's needs at work are different and we are committed to doing our best to satisfy these differences whilst ensuring consistency and fairness for all. We promise to champion diversity and inclusion with ongoing learning and training, as well as career progression opportunities for everyone. Future Plans. GFSL has been notified by it's shareholder (MOJ) that the provision of FM Services will in future be delivered by the private sector. This means that following a successful procurement process, GFSL's services will complete transfer to a private sector provider/providers no sooner than August 2027. Pride in People - Do the Right thing - One Team An ISO 9001 Certified Company TPBN1_UKTJ

Civil Design Engineer ScotlandFind out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now.- (Hybrid, Office, Site) Permanent Competitive Salary Car/Car Allowance Flexible Benefits Summary Are you an experienced Civil Engineer with a passion for civil engineering and the energy sector? Freedom Professional Services are seeking an individual with a strong technical expertise in a broad range of civil engineering disciplines to join our growing electricity transmission and distribution design team.With your strong technical expertise, you will be asked to lead the civil design of electricity substations across the UK from concept to completion and be able to work in close collaboration with other internal teams (electrical design, structural, surveys, wayleaves, cables, environmental), along with clients and stakeholders to ensure that all requirements are met.As a Civil Engineer, you will have the opportunity to work on design frameworks for DNO’s, as well as design and build opportunities for high profile clients and iconic projects, ensuring that all work is completed to the highest standard.You will be involved in every aspect of the project, from planning and cost estimation to construction and quality control.Some of the key deliverables in this role will include: Lead the production and review of engineering drawings engineering drawings, calculations, specifications, and reports for masonry buildings, steel portal frames, transformer bunds, drainage systems and roads, on projects ranging in construction contract value of £100K- £20M.Collaborate with clients and internal teams to ensure the effective delivery of projects, providing updates and identifying issues that could risk programme, quality or cost.Attend progress meetings as required at client/contractor offices or construction sites.Attend design team meetings to ensure the timely flow and release of quality information and to ensure that this information corresponds with the scope of works.Management of design risks to deliver buildable solutions.Provide engineering solutions to site-based problems through TQ/RFI process.Mentoring junior team members, providing technical guidance and promoting professional development Taking responsibility for your own professional development in line with current best practice, legislative changes, and customer requirements.We are looking for an experienced and ambitious civil engineer with the following attributes: A proven experience of working in a design environment for the construction of traditional masonry buildings, steel portal frames and reinforced concrete.Experience in client-facing roles, with the ability to manage client relationships effectively Ability to lead delivery of multiple simultaneous technical projects in a challenging environment.Strong communication skills to engage in technical discussions with colleagues, non-technical staff, and clients.Strong commitment to ongoing professional development and continuous learning You’ll have a degree in Civil Engineering (or related subject) and be working toward Chartered or Incorporated status with a relevant professional body such as ICE.Desirable: Experience working within the electricity distribution sector, particularly in substation design and electrical infrastructure Practical experience with AutoCAD, Revit and Civils3D for civil engineering design Full UK driving licence.Benefits: We are always evolving our benefits to ensure were attracting and retaining great people.Some of what you can expect includes: Competitive salary Car or Car allowance 25 days holiday plus Bank Holidays Pension with a leading provider and employer contribution Sick Pay Personal Wellbeing and Volunteer Days Private Medical Insurance Free 24/7 365 Employee Assistance Program to support mental health and well-being (including counselling sessions and legal advice) Flexible benefits to suit from Dental Insurance, Gym Memberships, Give As You Earn, Travel Insurance, Tax Free Bikes Personal development programme.Next Steps: As a business, we’re on a journey to build on our culture where everyone is included, treated fairly and with respect.This starts with recruitment and how we bring people into the organisation.We’ll do our best to outline the recruitment process to you ahead of time with plenty of notice. xjlbheb If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met.About Us: Freedom are part of the NG Bailey Group, one of the leading independent engineering and services businesses in the UK.Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training.Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies Progression is something we value and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.LI-CN1FreedomLI-hybrid

Job Profile for Contracts EngineerAll potential applicants are encouraged to scroll through and read the complete job description before applying.- SEL45267 Position: Contracts Engineer Location: Maldon/Home Salary: £40-50k plus company car Our client is a global manufacturer that designs, manufactures, and supplies climate control solutions across the commercial market, with a significant proportion of its work within the leisure sector.Due to continued growth in the UK market, they are seeking a Contracts Engineer to join their team.The role of the Contracts Engineer is to provide project management support for industrial and commercial climate control solutions.Projects will typically include swimming pool ventilation, air handling units, and dehumidification systems for leisure centres, with a focus on improving energy efficiency.Responsibilities include managing technical and commercial administration, reviewing drawings and specifications, maintaining accurate contractual records in line with UK contract law, and supporting sales teams through technical guidance and training.Contracts Engineer Job Requirements Previous experience working on Climate Control projects such as Swimming pool ventilation, Air Handling units and dehumidification systems Project Management/Engineering experience Ability to provide design, application and cost-effective solutions Be able to travel to Maldon and various when required.Contracts Engineer Salary & Benefits £40-50k depending on experience Company Car and fuel card Annual Bonus- based on performance 25 days holiday plus bank holidays Employee discount scheme Medicash Health Cash Plan (Incl. xjlbheb access to Mental Health Support) Life assurance scheme Training and Development Opportunities Specific equipment training provided Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

The Shift Engineer forms part of the Technical team service provided under the contract.Below covers everything you need to know about what this opportunity entails, as well as what is expected from applicants.This Role falls part of the FM Operations based in BP Sunbury static based.Operating Hours will be a shift 0800 till 1830 spread over a shift pattern 4 days on 4 days off ,This will include call out.- DAYS ONLY SHIFT This role offers the opportunity to provide efficient and effective control of work services, supporting projects, operational activities, and small works across the BP portfolio.Primarily site-based, the position also includes the potential to provide local support to other BP site, central London location, based on skill set and operational requirements.Training and professional development will be a key part of the role and overall package, with a focus on further upskilling in areas such as Authorised Person (AP) responsibilities, isolations, and other key disciplines.Key objectives of the role: The role will provide support in the coordination, planning and monitoring of sub-contract works including monitoring, auditing, and enforcement of the Control of Work requirements.The role is responsible for the safe execution, agreed quality and timely completion of sub-contract work and to ensure that the Client & JLL requirements are adhered to at all times.Support with out of contracted hours works and manage contractors and own work load Accordingly in accordance and support from the Engineering Management Team.Ability to fault find LV / ELV control systems including monitoring and fault diagnostics on power quality.Isolation of Plant and management of System including Controls and pump sets.Will need to be IT literature as they will be required to work in real time on a tablet.Manage data collection and systems to pull information and make changes.To be able to install and maintain new plant and equipment when required, ensure that plant faults and defects are swiftly rectified.Ensure that suitable spares are available to carry out both maintenance and reactive works and to establish estimated timescales to carry out remedial works The individual should have good understanding of HVAC systems and fundamentals, including the ability to be able to operate the equipment at its full potential.This includes basic controls knowledge with the ability to diagnose and repair any non-gas related issues.Manage time on Projects to suite deadlines and complete assigned tasks as stipulated by Technical Services / Project managers.Will be expected to have acquired elements of other skills which enable them to work flexibly across trades React to breakdown maintenance requests within the required SLAs.Ability to self-perform maintenance tasks.Good understanding of an IT environment and Data systems Previous Thermographic understanding preferred but not essential Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc.Understanding of modular UPS systems including full understanding and experience of functional switching and scheduled switching.Capability of producing switching programmes.Ability to maintain Dali lighting systems, including re-addressing and software changes (Software training to be provided) Experience working with building management systems including fault finding and operator use.Experience with VAV systems, FCU systems, passive and active chilled water circuits and chilled beams.Understanding of power generation, G59, auto changer systems.Or equivalent Experience and understanding of HVAC systems.Ability to test and diagnose power quality issues including harmonic distortion using onsite power analysers Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments Provide emergency response OOH on site to manage the site BCP, Escalate urgent issues identified through to the Technical Services Manager.Respond to work interruptions, outages or emergencies consistent with the SLA.Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated and conform Industry Standards Ensure maintenance tasks are completed within agreed timescales.Liaise with Clients representatives with respect to maintenance & repair tasks.Advise the Facilities Management Team of changes in critical environment requirements Must be willing to work over & above contractual hours.Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works.Undertake Upgrade & Install small works.Control and supervise contractors when required.To ensure all PPMs and Critical Facility PPMs are carried out to schedule and also ensure completion of all reactive Helpdesk Requests ensuring closing and completion in line with SLAs Ensure maintenance is carried out in line with JLL H&S procedures, using the permit to work system where applicable and action improvements identified during the building and workplace inspections and reviews Monitor and analyse environmental conditions, review the loading and working conditions of critical equipment regularly Fully understand the operational protocols associated with alarm conditions and auxiliary back-up system capabilities Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident).Determine the root cause and action items required to restore availability and prevent a recurrence.Review and submit to the Engineering Manager ensuring all actions are documented reviewed and completed Entering relevant quotes and remedial works onto the in-house team to be managed correctly Maintain L8 compliance and onsite water treatment systems Continually communicate building issues to end users.Carryout fault finding on start-delta motors including VFDs and Soft Start controls / contactors Assist and enhance service delivery through best practice and the effective use of site systems and equipment.Understanding of a CDM/ Permit to work process with experience of working on previous electrical install projects.Working alongside the EMEA Control of Works and SAP Knowledge of domestic and commercial LTHW systems, pressure vessels buffer vessels and valve operation.Maintain pumps sumps and tanks including float values sensors KNOWLEDGE, SKILLS & QUALIFICATIONS REQUIRED Building Services Knowledge Minimum of 5 yrs experience with a Recognised Apprenticeship and Qualifications to undertake the role in higher Education L2 Minimum Mechanical/ Electrical / HVAC Knowledge Commercial or LV switching Knowledge Facility knowledge understand Hvac and systems. xjlbheb HSE Knowledge City & Guilds or equivalent in an Engineering, Electrician qualifications SMSTMS / IOSH / NEBOSH certification desirable Manager or supervisory experience of contractors for both remedial service and maintenance, Competent operator of Permit to Work systems Computer literate, familiar with MS Office Applications, including Microsoft Project and capable of becoming competent user of bespoke databases Experience of having worked in a similar role within a large diverse organisation and have a proven track record of success in delivering and monitoring EHS activities Ideally, experience of working in a continuous improvement culture.BMS Controls Experience / HVAC Experience Understanding not limited to PRVs , Pumps, Critical Environment Cooling Knowledge of emergency response/standby/call out activities and protocols Understand the monitoring of utilities and environmental programmes

HIU Engineer Monday to Friday 8am to 4:30pm Breakdown's only Own Van Needed NW/W London £200-£250 a day CIS or PAYE Fortus Recruitment provides specialist recruitment services, supplying quality candidates on a temporary or permanent basis to leading organisations throughout the industry. We supply candidates from executive to operative level and are currently working with a contractor who are looking for HIU Engineer HIU Engineer Key Responsibilities: To identify materials and parts required to carry out repairs on HIU's to the set company standard. To record accurate logs of work undertaken and materials used to capture this on the company's PDA / I.T system. If any further works are required, liaise with the stores/admin teams, and then inform residents of the timescale for completion of the work being undertaken To manage, control, and be responsible for allocated van stock ensuring levels are kept as necessary Carry out your daily tasks in a helpful and professional approach prioritising customer service. To report any vulnerabilities or concerns to management via our internal process it can be addressed and reported back to the appropriate client. Requirements: NVQ L2 or L3 Plumbing & Heating Gas is desirable but not essential Domestic Tickets Full UK Driving Licence Experience within Social Housing desirable, but not essential If you are interested in this job with Alex Toumazos, please apply or call 07908604572 for more information. Fortus Recruitment Group Limited acts as an Employment Business for the supply of temporary workers and an Employment Agency in relation to permanent vacancies. Fortus Recruitment Group is an equal opportunities employer INDAT TPBN1_UKTJ

Junior Electrical Design Engineer (Switchgear) Dartford Up to £45,000 + Progression + Company Pension + Free Parking + Training & Development Are you a Design Engineer with electrical experience looking to join a close-knit, industry-leading team that offers ongoing training, development, and real progression within a supportive company with amazing staff retention? Do you want the opportunity to a family-feel business at the forefront of bespoke HV & LV switchgear solutions, known for their quality, cutting-edge products, and market reputation? On offer is a fantastic opportunity to develop your career within a highly specialised engineering team, working on bespoke, technically varied projects for a fast-growing leader in switchgear design and manufacture. You will join an established group of engineers who will support your growth, whether you're a seasoned engineer or looking to step into a junior design role. In the role you will produce detailed CAD designs for control panels and switchgear assemblies, collaborate closely with project engineers to develop accurate and cost-effective solutions, ensure appropriate component selection, and deliver designs in line with British Standards and internal specifications. You will also compile parts lists and liaise with procurement to support the build process from concept to completion. Are you a Design Engineer with electrical experience looking to join a close-knit, industry-leading team that offers ongoing training, development, and real progression within a supportive company retention? The Role Producing detailed CAD designs for bespoke LV control panels and switchgear. Working with project engineers to develop compliant, cost-effective engineering solutions. The Person Electrical Design Engineer Based in Dartford or easily commutable to Keywords : Design Engineer, LV, Low Voltage, Switchgear, Control Panels, CAD, ePlan, Electrical Engineering, Dartford, Kent, HV, London, Gravesend, High Voltage Reference Number: BBBH22729 If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Electrical Engineer - Port Equipment | Isle of Grain, Kent Electrical Engineer - Port Equipment • Salary & Benefits Salary - £56,000.00 42hr contracted working hours Overtime available Discretionary Bonus Working 5 in any 7 days between the hours of 6am - 10pm 22 days holiday + BH Excellent company pension scheme Additional benefits to be discussed ** Electrical Engineer - Port Equipment Required ** To join one of the UKs busiest container and general cargo ports, situated in the Wallend, Isle of Grain area. You will be reporting to the Engineering Supervisor and will support the varied requirements of the Operations dept. Working on shift and providing engineering site support for the duration of port operations. You will be required to carry out planned and reactive maintenance/repair works on equipment such as Container handling Quay side Cranes, Rubber Tyred Yard Gantry Cranes and all other Port related mobile equipment. Electrical Engineer - Port Equipment Requirements NVQ Level 3 or above in HGV-Plant/Mechanical or Electrical discipline. Previous HGV / heavy mobile plant / Diesel Engines (Mechanical) experience, Working knowledge of PLCs and variable speed drives, diagnosing and repairing faults in electrical control systems (Electrical). Full UK Driving Licence. Able to work confidently at height. To Note - If you haven't heard from us within 7-14 days, then please assume that your application for this specific role has been unsuccessful. TLP Recruitment acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Please note that by applying for this position you consent to TLP processing and storing your personal data for the purposes of providing you with work finding services. We process your personal data in accordance with data protection laws, which require us to give you a Privacy Statement to explain how we manage your personal data. Our full Privacy Statement is available to view on the TLP website, or it can be provided upon request. TPBN1_UKTJ

A leading recruitment agency seeks a Senior Commissioning Engineer for a contract role focused on water projects in the UK. Essential qualifications include a technical degree related to process control and proven experience in water operations.

Job Title: Senior Commissioning Engineer – Process / EICA (Water). Relevant technical qualification (apprenticeship, certificate, diploma, or degree in process control, chemical engineering, or environmental science). Our client is seeking an experienced Senior Commissioning Engineer to support th

Principal Process Safety Engineer. COMAH – Control of Major Accident Hazards (Safety Case support) experience. Site Asset Protection experience & Fire Safety Engineering experience.

Lead Electrical Design Engineer Location: Filton (60% onsite) Contract Duration: Until December 2026 (with possible extension) Pay Rate: £50.00 per hour (Umbrella) £37.38 per hour (PAYE) About the Role Carbon60's aerospace client has an exciting opportunity for an experienced Lead Electrical Design Engineer to support the development of a new control bench for a large hydromechanical test installation. You will be a key part of a multi-disciplinary team responsible for delivering the full electrical design lifecycle - from initial architecture development through to validation, verification, and entry into service. Key Responsibilities Lead and manage the electrical design for a complex avionic control bench. Develop and contribute to system architecture and integration activities. Produce detailed electrical schematics, drawings, and technical specifications. Manage technical design risks and design milestones (FCR, FDR, PDR, CDR). Oversee build, installation, and assembly of the control bench. Lead the V&V phase and ensure successful entry into service. Work closely with stakeholders to clarify requirements and meet delivery targets. Skills & Experience Required Proven experience leading medium-large electrical or avionic control bench design projects. Strong background using electrical design tools (e.g., AutoCAD, AutoCAD Electrical, KiCad). Solid understanding of electrical systems, electrical design principles, and testing methodologies. Experience with electrical architecture design, instrumentation, data acquisition, and control systems. Familiarity with avionic data buses (A429, CAN, AFDX) and hardware interfaces (discretes, analogue signals). Aerospace or highly regulated engineering industry experience is highly desirable. Team-oriented with strong communication and stakeholder-management skills. Contract Details IR35: Inside IR35 Hours: 35 per week (4.5-day working pattern between 07:00-19:00). Interview Process: 1-stage virtual interview. Why Apply? This is a fantastic opportunity to lead a technically challenging, high-visibility engineering project supporting next-generation aerospace systems. Ideal for a seasoned electrical design professional wanting to apply their expertise in a forward-thinking test engineering environment. If interested please apply with the latest copy of your CV and one of our consultants will be in contact in due course. Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy. TPBN1_UKTJ

The ideal candidate will have a strong background in process or control engineering, experience with advanced control systems, and excellent communication skills. A leading decarbonisation company in the United Kingdom is seeking a Solutions Engineer – Process Control to join their team. This role

What we’re looking forThe ability to work well within a team and follow processes, a “can do” attitude and great attention to detail.

Engineering qualification (ONC, HNC, NVQ Level 3, or equivalent) –. This role plays a key part in maintaining standards across the production process, from goods-in to final release, ensuring all products meet both internal and customer quality expectations. Complete all booking-in processes and m

What we’re looking forThe ability to work well within a team and follow processes, a “can do” attitude and great attention to detail.

Experienced in reading and interpreting complex engineering drawings.

What we’re looking forThe ability to work well within a team and follow processes, a “can do” attitude and great attention to detail.

Are you passionate about precision and quality in aerospace engineering?. Maintain quality control in line with business standards and customer requirements. Promote continuous improvement initiatives to enhance manufacturing processes.

What we’re looking forThe ability to work well within a team and follow processes, a “can do” attitude and great attention to detail.

Supporting production by processing priority inspection work. Working closely with manufacturing and engineering teams.

Graduate Process Engineer, to work with our global FMCG client Unilever, renowned for brands such as Dove, Sure, Persil, and Simple, and become an integral part of their fast-paced FMCG environment. The role holder will own the performance data analytics, line settings process, changeover process an

Process Engineer – Pharma / FMCG | London-Based | Up to £75k + Travel | Contract or Perm. This role suits engineers who have developed within. Understanding of how production processes integrate with.