Trabajos product specialist en BoltonCrear alertas

Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering £45ph Inside IR35 Do you have experience with AS9100 standards? Do you have quality experience in Manufacturing and Supply Chain environments? Do you want to work with an industry-leading company? If your answer to these is yes, then this could be the role for you! As the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. You will be involved in: • Complete scheduled Quality Assurance audits at suppliers using standardised tools, • Conduct thorough verification/inspection of products to ensure they meet the required quality standards, • Identify and document any non-conformities in the manufacturing process and deviations from the product specifications, • Maintain accurate and organised records of all quality control activities, • Communicate findings to relevant departments/stakeholders, • Work cross-functionally to implement root cause corrective actions at supplier, • Contribute to continuous improvement initiatives to enhance the quality of our products, • Participate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers, • Provide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders Your skillset may include: • Trained auditor to AS9100, • Experienced in conducting Quality Audits & surveillance, • Quality experience within Mechanical, Manufacturing or Electronic Engineering, • Proven track record in Quality, Supply Chain or Manufacturing, • Defence, automotive, or aerospace industry experience, • Familiar with GD&T and able to use a variety of metrology equipment, • QA problem-solving and improvement methods (8D, RCA, DMAIC, etc.), • Knowledge of the product lifecycle management, • Analytical skills; ability to run reports in Excel, use SAP QM system, and document management tools, • Continuous improvement awareness, • Experience is NADCAP If this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further! Supplier Quality Engineer 6 month contract Based in Bolton - hybrid Offering £45ph Inside IR35 Disclaimer: This vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change.

Our client is seeking a motivated and detail-oriented Account Executive to join a specialist healthcare communications agency working across pharmaceutical, biotech and patient advocacy campaigns. This role is ideal for someone early in their PR career who is passionate about healthcare, patient outcomes, and strategic communications. You will support the delivery of integrated communications programmes across multiple therapeutic areas, working closely with senior team members to deliver high-quality campaigns for global healthcare clients. Key Responsibilities Support the delivery of healthcare PR and patient advocacy campaigns across multiple client accounts Assist in the development of press materials, campaign content, and stakeholder communications Monitor media coverage and compile daily/weekly coverage reports and insights summaries Conduct background research on therapeutic areas, patient journeys, and healthcare policy landscapes Support the execution of disease awareness and education campaigns Coordinate logistics for meetings, events, and advisory boards (virtual and in-person) Liaise with internal teams including digital, creative, and public affairs specialists Assist in managing project timelines, budgets, and deliverables under supervision Build relationships with journalists, patient organisations, and healthcare stakeholders (as appropriate) Ensure all outputs comply with regulatory and ethical standards in healthcare communications About You 0–1+ years’ experience in PR, communications, healthcare, or agency environments (internships considered) Strong interest in healthcare, pharmaceuticals, or patient advocacy Excellent written and verbal communication skills Highly organised with strong attention to detail Ability to manage multiple tasks in a fast-paced environment Comfortable working with scientific or medical content (training provided) Proactive, curious, and eager to learn Strong team player with a collaborative mindset Desirable Skills Degree in life sciences, communications, journalism, psychology, or related field Understanding of healthcare systems, NHS, or pharmaceutical industry Experience with media monitoring tools or social listening platforms Familiarity with digital communications or social media management Interest in public health, patient engagement, or health policy What We Offer Opportunity to work on global healthcare campaigns that impact patients’ lives Exposure to leading pharmaceutical and biotech clients Training and development in healthcare communications and PR Supportive, collaborative team environment with senior mentorship Clear progression pathway within healthcare communications Career Development This role is remote with an expectation to visit their beautiful offices in London for meetings once a week ideally. This role provides a structured pathway into: Account Manager roles in healthcare PR Specialisation in patient advocacy, public affairs, or digital healthcare communications Opportunities to work on global product launches, disease awareness campaigns, and policy-driven initiatives

Technical Sales Manager – Embedded Systems - Remote UK Full-Time | Competitive Salary + Bonus + Benefits A leading specialist in advanced technology solutions is seeking a dynamic Technical Sales Engineer to join their embedded division. This is an exciting opportunity to become part of a highly technical sales environment, representing a portfolio of cutting-edge embedded computing solutions to customers across the UK About the Role: As a Technical Sales Manager, you will work closely with a broad range of industrial and technology-focused customers. You will provide pre-sales technical consultation, identify and develop new business opportunities, and nurture existing accounts. Your expertise in embedded systems and your customer-first mindset will be central to delivering tailored solutions and driving revenue growth. Key Responsibilities: • Manage and develop a portfolio of customers, • Identify customer needs and propose suitable embedded technology solutions, • Provide technical product demonstrations, proposals, and project support, • Collaborate with internal engineering and product teams to develop tailored offerings, • Attend customer visits, trade shows, and technical events as required, • Maintain accurate forecasting and reporting via CRM systems Ideal Candidate Profile: • Proven background in technical sales or field applications within the embedded computing or electronics industry, • Sound knowledge of embedded hardware or software (e.g., SBCs, modules, microcontrollers, RTOS, SoCs), • Strong commercial awareness and customer engagement skills, • Self-motivated, with excellent communication and presentation abilities, • Full UK driving licence, • Engineering or electronics-related qualification (HNC/HND/Degree) desirable What’s On Offer: • Competitive basic salary plus uncapped bonus, • Company car or car allowance, • Private medical insurance & pension, • Ongoing training & career development, • A role within a collaborative and innovative team

Electronic Design Support Engineer Salary: Circa £50,000–£55,000 depending on experience Location: Bolton – primarily on-site with occasional homeworking Develop new and innovative electronic solutions to address complex customer requirements in the defence sector. You will be well-rewarded at this established defence company that produces military weapons systems with bonuses, annual salary reviews, paid overtime and so forth. About the Role: • Act as a design team representative to interface with the design and manufacturing teams to transition the product from the development phase into series manufacture., • Work with manufacturing on process and capability issues and support continuous improvement initiatives to maximise production yields, • Support non-conformance management, dealing with design queries, • Support obsolescence management by providing recommendations to the design team Requirements: • Strong Electronic Engineer with a background in RF engineering, • Detailed knowledge of RF assembly and test procedures would be advantageous, • Ability to investigate and resolve production problems, • Multidisciplinary team experience, working with both the design and manufacturing teams, supporting project changes efficiently and maintaining the production schedule, • British Citizen eligible for high-level security clearance Why this role? • Exciting opportunity to work at the forefront of technological innovation, • Supportive work environment with a clear path for development and progression, • Financial benefits, such as paid overtime and annual bonuses, • Flexible working arrangements and 25 days holiday plus bank holidays, • Excellent site facilities, including subsidised meals, free parking, etc. Due to the nature of work undertaken at our client's site, incumbents of these positions are required to meet special nationality rules and therefore these vacancies are only open to sole British Citizens. Applicants who meet this criterion will also be required to undergo security clearance vetting, if not already security cleared to a minimum SC level. Electus Recruitment Solutions provides specialist engineering and technical recruitment solutions to a number of high technology industries. We thank you for your interest in this vacancy. If you don't hear from us within 7 working days, please presume your application has been unsuccessful on this occasion. This is a permanent position.

Our client has an opportunity for a Mechanical Engineer to join their Calibration and Maintenance Team. You will be joining a dynamic and focussed team, responsible for the support of the manufacturing function across all stages of product assembly integration and test. The team are self-motivated and work directly with support functions and engineers across MBDA to resolve routine and non-routine tasks arising within the business.\n\nRole: Mechanical Engineer\n Location: Bolton, fully onsite\n Hours: 37 per week\n Hourly Rate: £32-£35 per hour via Umbrella, inside IR35\n Clearance: SC required before starting\n\nWhat you'll be doing:\n\nThe main aspects of the role will be as technical support for the metrology department supporting COTS (commercial of the shelf) equipment and STTE (Special to type test equipment) calibration and maintenance.\nYou will be required to assist production with technical queries on fixtures and tooling along with supporting CMM (Co-ordinate measuring machine) inspection work.\nYou will be required to guide operators on best practice within the metrology department on day-to-day technical queries alongside looking at ways to improve process and measurement techniques within the department.\nYou will also give technical support for mechanical calibration such as high/low pressure & temperature calibrations.\n Requirements:\n\nMinimum qualification: HNC in Mechanical Engineering.\nExperience and knowledge of calibrating torque tools to ISO 6789-2:2017 required.\nGood knowledge of Geometric Dimensioning & Tolerancing (GD&T) required.\nExperience and knowledge in dimensional calibration required\nExperience and knowledge of using and creating programs for coordinate measuring machine required.\nGood knowledge of temperature and pressure calibration desirable\nAble to deal with multiple issues, tasks and priorities concurrently.If you are interested in applying for this position and you meet the requirements, please apply immediately!\n\nLine Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity.\n\n"Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Electrical Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDo you have experience as an Electrical Inspector?\n\nDo you hold Electrical/Electronics trade qualifications?\n\nDo you want to work with an industry-leading company?\n\nIf your answers are yes to these, then this could be the role for you!\n\nAs the Electrical Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry!\n\nYou will be involved in:\n\nResponsible for all elements necessary to achieve and maintain the quality of deliverable hardware\nCertification of product in line with processes and procedures\nExamining for correct assembly including verifying all forms of electrical connections\nExamining the finish of all parts\nInspect for physical damage\nInspection checks for non-product certification activities\nRaise and maintain relevant data records/non-conformance reports\nProduce relevant inspection/quality control documentation/history sheets\nMaintain product certification and approval via regular audits\nEnsure compliance with all associated procedures applicable to the manufacturing process \n\nYour skillest may include:\n\nMaintain a safe working environment\nMaintain a good housekeeping policy\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC\nExperience as a skilled person.\nIPC 610 & IPC 620 certified/trained\nManual handling training\nESD Training \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nElectrical Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements.\n\nRole: Production Test Engineer - Live Build\n Location: Stevenage - fully onsite\n Hours: 37 per week\n Hourly Rate: £32-£36 per hour via Umbrella, inside IR35\n Clearance: SC required before starting, UK Eyes Only due to project\n\nWhat you'll be doing:\n You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following:\n\nProviding test engineering support to operators on the shopfloor, including supporting the introduction of new test equipment.\nTesting and diagnosing complex electrical/electronic systems, sub-assemblies and circuit cards down to component level.\nGenerating test specifications, operator instructions and technical reports - based on higher-level requirements and information.\nPromptly identifying remedial and corrective actions to allow Manufacturing to continue in line with the programme, following production test failures.\nSupporting meetings with Quality and Operations to provide status updates on Test Engineering actions and investigations.\n Requirements:\n Essential:\n\nMinimum HNC level of Engineering qualifications or equivalent.\nGood understanding of digital and analogue electronic measurement and test principles, and fault diagnosis techniques, with demonstrable experience down to component level.\nAwareness of electrical/electronic sub-system and system design, integration and test principles.\nGood verbal and written communication skills, including generation of test specifications, operator instructions and technical reports.\nAbility to plan and organise one's work according to assigned priorities.\n Advantageous:\n\nKnowledge of RF and Microwave technology at the subsystem level.\nExperience in operating manual and automated test equipment in an Electronics Manufacturing environment.\n\nIf you are interested in applying for this position and you meet the requirements, please apply immediately!\n\nLine Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity.\n\n"Follow @LineUpAviation on Twitter for all our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at any time! Thank you for your follow

Supplier Quality Engineer\n\n6 month contract\n\nBased in Bolton - hybrid\n\nOffering £45ph Inside IR35\n\nDo you have experience with AS9100 standards?\n\nDo you have quality experience in Manufacturing and Supply Chain environments?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Supplier Quality Engineer, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry.\n\nYou will be involved in:\n\nComplete scheduled Quality Assurance audits at suppliers using standardised tools \nConduct thorough verification/inspection of products to ensure they meet the required quality standards\nIdentify and document any non-conformities in the manufacturing process and deviations from the product specifications\nMaintain accurate and organised records of all quality control activities\nCommunicate findings to relevant departments/stakeholders\nWork cross-functionally to implement root cause corrective actions at supplier\nContribute to continuous improvement initiatives to enhance the quality of our products\nParticipate in the Project Quality network to report and share the quality assurance status linked to applicable suppliers\nProvide non-conformance, root cause & corrective action data analysis and summary reports into senior stakeholders \n\nYour skillset may include:\n\nTrained auditor to AS9100\nExperienced in conducting Quality Audits & surveillance\nQuality experience within Mechanical, Manufacturing or Electronic Engineering\nProven track record in Quality, Supply Chain or Manufacturing\nDefence, automotive, or aerospace industry experience\nFamiliar with GD&T and able to use a variety of metrology equipment \nQA problem-solving and improvement methods (8D, RCA, DMAIC, etc.)\nKnowledge of the product lifecycle management\nAnalytical skills; ability to run reports in Excel, use SAP QM system, and document management tools\nContinuous improvement awareness\nExperience is NADCAP \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nSupplier Quality Engineer\n\n6 month contract\n\nBased in Bolton - hybrid\n\nOffering £45ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Goods Inwards Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDo you have goods in inspection experience?\n\nDo you have experience with SAP?\n\nDo you want to work with an industry-leading company?\n\nIf your answer to these is yes, then this could be the role for you!\n\nAs the Goods Inwards Inspector, you will be working alongside a market-leading Defence and Aerospace company who are constantly growing and developing. They are always looking to bring on new talents such as yourself and further develop your skills to enable you to grow within the company and industry. \n\nYou will be involved in:\n\nEnsuring that goods received from suppliers meet the criteria of the purchase order and are compliant in all respects.\nVerify and accept procured products in line with contractual conditions.\nPracticed in reading and understanding assembly drawings with due regard to dimensional tolerances and machining.\nExamining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc. Undertaking first-off inspections.\nProduce relevant inspection/quality control documentation.\nCheck and complete all paperwork associated with the delivered article.\nEnsure inspection times are met.\nControl defect items via segregation from good products. Raise and maintain relevant defect reports.\nMaintain product verification approval process via regular audits. Inspection of PCB\nEnsure compliance with all associated procedures applicable to the manufacturing process. \n\nYour Skillset may include:\n\nFormal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21 or HNC. \nSAP literate \n\nIf this all sounds like something you will be interested in then simply apply and we can discuss the opportunity further!\n\nGoods Inwards Inspector\n\n12 month contract\n\nBased in Bolton\n\nOffering £28.35ph Inside IR35\n\nDisclaimer:\n\nThis vacancy is being advertised by either Advanced Resource Managers Limited, Advanced Resource Managers IT Limited or Advanced Resource Managers Engineering Limited ("ARM"). ARM is a specialist talent acquisition and management consultancy. We provide technical contingency recruitment and a portfolio of more complex resource solutions. Our specialist recruitment divisions cover the entire technical arena, including some of the most economically and strategically important industries in the UK and the world today. We will never send your CV without your permission. Where the role is marked as Outside IR35 in the advertisement this is subject to receipt of a final Status Determination Statement from the end Client and may be subject to change

Digital Insights Specialist As the Digital Insights Specialist, you will take ownership for driving measurable digital improvement and bridge the gap between strategy and execution, ensuring all digital channels work harder, convert better and deliver growth. Bury, Greater Manchester // 4 days in the office £36,000 – £47,000 + bonus + benefits Forward Role are partnered with a highly respected, long-established B2B wholesale brand that is investing heavily in digital, data and AI. With a new website launching and significant growth in digital activity, they are now looking for a Digital Insights Specialist to take full ownership of digital performance, optimisation and reporting. This is a high-impact role where you'll turn data into commercial improvements across the full digital ecosystem, from website and SEO to email journeys, paid media and product discovery. If you love finding opportunities in the numbers and translating insight into meaningful action, this is the one for you. As the business scales its digital environment - including a new website, marketing automation, enhanced search, paid activity and community growth - they need a dedicated performance insights expert. The ideal candidate will have a drive for growth! The will love working in a collaborative environment and naturally curious with a highly ...

Recertification Manager Safety Systems Job Title: Recertification Manager Safety Systems Job reference Number:747791-9242-26103Office Based: Manchester (Covering North West) Remuneration: £35,000 - £40,000 Benefits: Pension scheme, 25 Days A/L & full comprehensive benefits package Do not wait to apply after reading this description a high application volume is expected for this opportunity. The role of the Recertification Manager Safety Systems will involve: • Recertification Manager position, leading and managing theRecertification department dealing with a manufactured range of height safety and fall arrest safety systems (such as access ladders, walkway systems, lifelines, safety gates, steel and aluminum railing systems), • Oversee operational delivery, including scheduling, CRM activity, site visits, surveys, and resolving issues, • Manage the Recertification Team (a team of 10), conducting performance reviews and ensuring engineers remain fully compliant with current regulations, • Drive business growth, including new revenue streams, contract renewals, upselling services, and winning new clients, • Average order values range from £10,000 to £250,000, • Must have construction experience dealing with a technical product; ideally height safety and fall arrest safety systems although would be open to entrance systems or roofing systems, • Must have people management experience, • Must have previous experience within repair, maintenance, re-testing, servicing or related, • Strong preference for experience of working at height, • Existing IOSH or NEBOSH certification or open to getting qualification., • Capable of managing and expanding existing relationships and generating new business, • Organised, have good time management skills and to be self-motivated xrnqpay to perform and reach targets Mitchell Maguire is a specialist Construction Field Sales Recruitment Consultancy, dealing exclusively with Construction Field Sales Jobs, Construction field sales vacancies and Specification field sales positions within: Recertification Manager, Height Safety Manager, Fall Protection Manager, Compliance Manager, Safety Systems Manager, Inspection Manager, Certification Manager, Technician, Inspection, Repair, Co-ordinator, Safety Systems, Height Safety Systems, Fall Arrest Systems, Steel Systems, Roofing Safety Systems, Access Ladders, Walkway Systems, Lifelines, Safety Gates, Doors, Roofing

Job Title: Quality Inspector Location: Farnworth, Bolton, BL4 0AN Salary: £29,000 - £31,000 per annum Job Type: Full time, Permanent Working Hours: 38 Hours Per Week About Us: As one of the UKs leading heating element manufacturers, Backer Heatrod offer a wide range of products from standard straight elements through to customer bespoke equipment. Our success is built on our ability to satisfy our customers by providing quality products, outstanding customer service and delivering on time every time! We combine a growing industrial manufacturing base with a thriving distribution business. About the Role: Are you passionate about maintaining high standards and ensuring products meet strict quality requirements? Do you thrive in a fast-paced manufacturing environment where attention to detail and continuous improvement are key? If so, wed love to hear from you. Were looking for a proactive Quality Inspector to support our growing team by carrying out quality inspections, monitoring processes, and helping drive ongoing improvements throughout the business. This is a fantastic opportunity to make a real impact on product quality and operational excellence. What youll be doing: As our Quality Inspector, you will play a key role in safeguarding product quality by: Conducting internal audits Performing goods-inward, product, and equipment quality inspections Carrying out daily process-based quality checks and recording results Monitoring scrap levels and investigating root causes Raising and progressing corrective actions with suppliers Supporting validation of supplier corrective actions Overseeing internal and external calibration of equipment Assisting in the creation of SOPs and work instructions Managing and reporting on customer returns Undertaking projects focused on continuous improvement and Lean principles Ensuring clear, accurate documentation and communication across teams What Were Looking for: Essential: ISO 9001 Internal Auditor qualification Minimum 2 years experience in a similar role Ability to read technical drawings Experience using basic measuring equipment Intermediate MS Office skills Strong time management, attention to detail, and QMS record-keeping abilities Excellent communication skills Confident decision-maker Organised, able to work in a busy environment, and willing to challenge where needed Desirable: IOSH / ISO 14001 / ISO 45001 internal auditor training 5S experience Familiarity with ISO 9001/14001/45001 systems Knowledge of root cause analysis tools Why Join Us? Youll be part of a supportive, collaborative team working to uphold high-quality standards across the business. We value professional development and encourage continuous learning, reflective practice, and the chance to grow your skills. Youll also play an essential role in strengthening our quality culture-helping us deliver excellence to customers and improve processes at every stage. Benefits: 25 days holiday plus bank holidays Pension scheme Cash Health Plan Cycle to work scheme Company life assurance Full training and support Opportunities for career progression Friendly and inclusive working environment On-site parking Please Note: No agencies. Please click the APPLY button to send your CV and Cover Letter for this role. Candidates with the relevant experience or job titles of: Quality Assurance Specialist, Process Improvement Engineer, Quality Systems Engineer, Manufacturing Quality Analyst, Product Quality Inspector, Manufacturing Quality Assurance, may also be considered for this role.

Senior FGPA Engineer If you are considering sending an application, make sure to hit the apply button below after reading through the entire description. £Up to £75,000 GBP Onsite WORKING Location: Manchester, North West - United Kingdom Type: Permanent Senior FPGA Engineer (High-Performance & Secure Systems) Our client is a specialist technology organisation developing high-performance hardware appliances for use in highly secure and demanding environments. As a Senior FPGA Engineer, you will work on the design and delivery of complex FPGA-based systems, contributing to full-stack hardware solutions used within defensive cyber and secure communications domains. Based onsite in Manchester, this is a hands-on role offering full lifecycle involvement, from blank-sheet design through to delivery and in-service support. You will work closely with software, hardware, and systems engineers to develop reliable, maintainable, and high-bandwidth solutions where security is a primary design consideration. You'll have the opportunity to: • Design and develop FPGA firmware for high-performance security appliances, • Work across full product lifecycles, from concept and architecture through delivery and support, • Develop VHDL-based FPGA solutions for high-bandwidth data processing, • Work with modern FPGA platforms and toolchains (Altera preferred, others considered), • Collaborate with embedded software, hardware, and systems engineering teams, • Contribute to the design of complete appliances including FPGA, software, and hardware elements, • Develop FPGA firmware in VHDL for high-bandwidth data processing applications, • Design and implement high-speed FPGA interfaces including networking and DRAM, • Contribute to system-level design of secure hardware appliances, • Support integration across FPGA firmware, embedded software, and custom hardware, • Participate in verification, test, and in-service support activities, • Work within export-controlled and security-sensitive engineering environments, • Strong hands-on experience developing FPGA solutions using VHDL, • Experience with high-bandwidth data processing in FPGA-based systems, • Familiarity with high-speed interfaces such as networking and DRAM, • Experience designing FPGA-based solutions within secure or regulated environments, • Working knowledge of hardware design principles, • Experience with at least one modern FPGA toolchain (Altera, Xilinx, Achronix, or similar), • Willingness to work onsite in a secure engineering environment, • FPGA-centric system design for defensive cyber and secure technology applications, • Full-stack appliance development spanning FPGA, embedded software, and custom hardware, • High-performance, security-led engineering environmentsYou will operate in an environment that combines:, • Blank-sheet product development, • High-bandwidth, high-reliability system design, • Long-term ownership of delivered engineering solutionsWhy Join? xrnqpay, • Work on challenging FPGA designs with real-world security impact, • Own FPGA development across full product lifecycles, • Operate in a technically deep, onsite engineering environment, • Competitive salary range £60,000 - £75,000 depending on experience #aaon

Area Sales Manager Wall Protection and Louvres Job Title: Area Sales Manager Wall Protection and Louvres Candidates should take the time to read all the elements of this job advert carefully Please make your application promptly. Industry Sector: Architects, Interior Designers, Specifiers, Flooring Contractors, External Cladding Contractors, Main Contractors and Specialist Sub Contractors / Installers, Wall Protection, Entrance Flooring, Specialist Coatings, Expansion Joints, Cubicle Curtain Track, Solar Shading, Explosion Venting and Installation Services Area to be covered: North West & North Wales Remuneration: £41,000 - £48,000 Neg. + 17% uncapped commission Benefits: £500 Car allowance and Salary Sacrifice EV Scheme available & Full Benefits The role of the Area Sales Manager Wall protection and Louvres will involve: Field sales role, selling a premium manufactured range of wall protection, as well as other interior building products; entrance matting, expansion joints and exterior building products such as; louvres and explosion/ fire suppression venting (big push on louvres) Targeting (historically) heavily into the healthcare market, but also; commercial buildings, leisure and education, car parks, data centres and shopping centres (big push on data centres) 60% of your time getting specified by architects and end users 40% of your time will be spent getting on to construction sites building relationships with main contractors,and specialist sub-contractors such as flooring contractors, external cladding contractors etc and breaking other manufacturers specs for quick wins whenever possible You will inherit a £2.4m+ project bank Revenue target will be circa £1.4m (typically split 35% new build, 65% refurbishment projects, although the high growth area is new build!) Area currently achieving budget and only available due an internal promotion Focusing on projects £50,000+ (telesales team will manage smaller orders Typically 15-20 appointments a week over Four days, One day on the phone appointment setting for the following week either from the office or from home (excellent support from head office in respect of quotes and follow ups) Splitting your time 60% account management and 40% new business prospecting The ideal applicant will be an Area Sales Manager Wall Protection and Louvres with: Must have a proven field sales track record of selling building products Must have architect specification field sales experience Open to both interior building product and exterior products such as louvres, external cladding, curtain walling or any building envelope system Preferably with contacts within main contractors and specialist sub contractors such as flooring contractors, external cladding contractors etc. Open to most technical premium building products products such as: walling, flooring, interior finishes, xrnqpay interior fit out, partitioning, ceilings, louvres, external cladding, curtain walling, building envelope systems etc Ability to build relationships internally as well as externally A mix of specification and contractor experience is ideal The Company: Est. 50 years+ 50+ UK employees Circa £10m turnover Privately held Part of a large European group Mitchell Maguire is a specialist construction field sales recruitment consultancy, dealing exclusively with construction field sales jobs, construction field sales vacancies and specification field sales positions within: Architects, Interior Designers, Specifiers, Flooring Contractors, External Cladding Contractors, Main Contractors and Specialist Sub Contractors / Installers, Wall Protection, Entrance Flooring, Specialist Coatings, Expansion Joints, Cubicle Curtain Track, Solar Shading, Explosion Venting and Installation Services

On behalf of our client, we are seeking to recruit several Mechanical Fitter to join on an initial 12-month contract. As a Mechanical Fitter you will be responsible for carrying out manufacturing and test tasks within the mechanical department, in accordance with product certification procedures, defined workmanship standards, allocated budgets and timescales to meet project objectives. Role: Mechanical Fitter Pay: £28.35 Per hour via Umbrella rate Contract: Monday to Friday, 37 Hours a week,12-month contract Location: Filton IR35 Status: Inside Security Clearance: BPSS Start however will required to gain SC Clearance Responsibilities Certify the product in line with the product certification procedure. Maintain product certification and approval via regular audits. Possess a versatile skill base with the capability to apply these skills across a range of tasks. Be fully conversant with all equipment, tools and measuring instruments associated with the manufacturing cycle. Ensure manufacturing build times are met. Check and complete all paperwork associated with the manufacturing data pack. Maintain to the highest level, workmanship standards and product quality. Ensure compliance with all associated procedures applicable to the manufacturing process. Maintain a safe working environment. Maintain a good housekeeping policy. Communicate best practice to other team members. The successful candidate should be a team player who is able to demonstrate customer focus. They should also have proven planning and organising skills and be flexible and adaptable. Education/Essential Experince Formal technical engineering/craft apprenticeship to NVQ Level 3/TR23/TR21. Formal further education certificate to HNC or equivalent certificate. Significant mechanical fitting experience required - the work at at a fine detailed level, so any experience with intricate workIf you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation is a specialist aviation and aerospace recruitment company that has been operating all over the world for more than 30 years. We work with some of the industry's best-known companies and pride ourselves with working to the highest standard of service supported by an ingrained culture of honesty and integrity. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Bolton An exciting opportunity within Component Engineering team to help shape and play an important part in support across the business. No two days are the same supporting a large network of teams within the business. Salary: Circa £ 48,000 depending on experience Dynamic (hybrid) working: 2 days per week on-site due to workload classification Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company bonus: Up to £2,500 (based on company performance and will vary year to year) Pension: maximum total (employer and employee) contribution of up to 14% Overtime: opportunity for paid overtime Flexi Leave: Up to 15 additional days Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more...The opportunity: As MBDAs mission to stay at the forefront for Electronics, Electrical, Mechanical & Materials commodities an exciting opportunity has arisen to join our Components team and lend your expertise. You will play a critical role in managing Electronic Components, assessing market trends and technical risks. The role demands a passionate professional who can lead in an Electronics or RF semiconductor specialism. The role requires technical advisement to a large amount of stakeholders across the business from Projects, Engineering teams, Procurement, Customer Service Support and many more. You will be accountable for providing Technical advice and reporting on risks, working with suppliers and understanding the needs within MBDA to suit the requirement of our ever-evolving business needs. As the Principal Electrical Component Engineer, you will maintain your expertise in specialist areas and ensure that this expertise is effectively passed to others, including participating in design reviews, training and other development activities, as appropriate, enabling MBDA to maintain its capability. There is also the opportunity to support and lead international collaboration within the company, helping define best practice and manage the adoption and adherence of agreed methodologies The Component Engineering team you will be a part of has been vital to our product delivery by providing highly sought after subject matter expertise when it comes to the individual's relevant commodity experience. The team operates from both Stevenage and Bolton sites, representing a diverse group of friendly supportive colleagues who pull together when needed to achieve our mission. What we're looking for Knowledge or experience within an electronic component discipline. Knowledge of electronic suppliers especially in semi-conductors Appreciation of REACH and RoHS regulations. Strong communication skills both written and verbal. Pro-activeness and self-motivation to improve self, improve process, and get the job done. It would be advantageous if the candidate has worked in supply chain and knowledge of Electrical and electro-mechanical products. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-SD1

CAD Technician Office-based - You can be based in or around the following areas: Bolton, Bury, Wigan, Atherton, Salford, Manchester, Warrington, St Helens, Ashton-in-Makerfield £26,000 - £35,000 + Overtime + Fully Flexible Working + Training on Land Surveying Software + Progression into Senior Technician + Holidays + Pension Are you a Computer Aided Design (CAD) Technician seeking a role with a market leading surveyor with a varied yet refined product range across Topographic, Building, and Engineering surveying industries? Do you want to join a tight-knit team where you can take full control of your work-life balance through flexible working and boost your earnings through uncapped overtime? This is a brilliant opportunity to join a leading surveyor as it looks to add to their growing team. With the ability to choose your own working schedule and optional overtime, this is a fantastic opportunity to have full control of your professional and personal schedule. Offering a range of specialist services, this company prides itself on producing a high-quality final product. With in-depth training on industry specific software, you will quickly become a master of your craft, with a clear route to progress into a Senior Technician role. The ideal candidate is experienced using AutoCAD, now seeking a role within an industry leading surveying company offering a unique work-life balance and clearly defined long-term progression opportunities. This is a fantastic opportunity for an experienced technician to join a close-knit team in a leading surveying company as they look to add to their growing cohort of CAD Technicians. The Role: CAD Technician working alongside the survey team to produce a high-quality final product Processing and verifying survey data and using CAD to produce the final drawing Fully flexible schedule with the ability to choose your own working hours Ability to boost your earnings with uncapped overtime Training on industry-specific software with clear progression into a Senior CAD Technician role The Person: AutoCAD experience Seeking a role offering unique control of your work-life balance Knowledge of land / building surveying is desirable but not essential Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact Alfie Derrick at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

We are recruiting for Warehouse Operatives to join a logistics company working with well known branded household items based in Westhoughton. This is a temporary ongoing role with no weekend working!! Hours and Pay: Monday – Friday 6am-4pm OR 7am–3pm - £12.71 per hour As Warehouse Operative you will be working in a clean and modern warehouse environment undertaking any of the following duties: Re-palletising stock: Transfer goods from European pallets to UK-standard pallets Product repacking: Breakdown large packs of toilet rolls and repack them into smaller retail-ready boxes, ensuring accurate quantities and secure packaging. Re-labelling items for associated promotions Quality control: Inspect and quality check all items to ensure packaging meets company and retail standards. We are keen to hear from applicants with the following experience: Previous experience in a warehouse or packing role is desirable, but full training will be provided. Excellent attention to detail. Ability to stand at a workstation all day Ability to work in a targeted environment This is a fantastic opportunity for someone who enjoys hands-on work, takes pride in maintaining high standards, and is keen to be part of a supportive and dynamic workplace. Benefits: Good public transport links Onsite Free Parking Modern, Welcoming and Positive Working Environment Canteen Area Long Term Opportunity Full training provided – “buddy system” with an experienced Warehouse Operative and full induction training in place Online payslips Weekly pay A friendly and helpful Meridian team to support you with any queries at any time Apply now or call our Rochdale office to discuss this Warehouse Operative role in more detail! Meridian Business Support is a recruitment specialist acting on behalf of our client as an Employment Business for this vacancy

Bolton We are seeking an experience SAP S/4HANA specialist and project manager to support our SAP transformation, delivering new and existing capabilities within the domain and to ensure delivery of the roadmap for the years ahead. Salary: Up to £70,000 depending on experience Dynamic (hybrid) working: 1-2 days per week on-site; depending of the phase of the project, more days on site will be required Security Clearance: British Citizen or a Dual UK national with British citizenship Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team. What we can offer you: Company Bonus: Bonus of up to 21% of base salary Pension: maximum total (employer and employee) contribution of up to 14% Flexible working: We welcome applicants who are looking for flexible working arrangements Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments Facilities: Fantastic site facilities including subsidised meals, free car parking and much more... Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more . The opportunity: We are working on a transformation programme to move from its current SAP ECC6 systems to SAP S/4HANA across the MBDA Group, with Greenfield methodology. This strategy will impact a number of domain areas and the implementation of S/4HANA will provide an opportunity for each domain to review its use of existing tools and determine a roadmap for consolidation across the Group and deliver the best-in-class tools for our business users. This role will focus on Product / SAP Global Trade Services (GTS) and you will support maintenance activities as well as supporting the related SAP S/4 modules. This role falls within the Digital Solutions (DS) area of MBDA; part of Digital Excellence (DEx), the DS team focusses on delivering IT solutions that are used to support the business in a variety of domains. Main responsibilities: Project management: IT responsibility for the successful implementation of our current S/4HANA Product-related modules (PLM for MBDA UK and SAP Global Trade Services (GTS)). Manage the planning, coordination and supervision of SAP projects, ensuring rigorous monitoring of the quality of the integrator's deliverables. To be the main point of contact between business teams and DEx teams (security, network, technical architect, back office...) During deployment of S/4 systems, to be the point of contact for the DS Procurement domain for the UK. To be in charge of related DS roadmaps for the MBDA UK. Business As Usual-BAU activities and optimisation: To be a DS point of contact to manage the anomalies and enhancements asked for by the key-users for the related modules and SAP GTS. To provide functional and technical support to key business users. Leadership and training: Lead and train local and international teams, to monitor the knowledge transfer sessions and reinforce DS capacities on the related SAP modules. What we're looking for from you: Deep knowledge in the areas of SAP PLM, including configuration activities, knowledge in other SAP modules as well as the setup of interfaces. Experience of integrations of SAP PLM with related systems and SAP GTS. Skills in SAP IT project management, with experience of leading multinational SAP projects. Hands on experience with data migration and master data governance activities. Experience of challenging third-party development teams to deliver against the strategy and finding a solution to deliver the business requirements. Experience with S/4 Hana will be an advantage. Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom. We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more... We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process. Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information. #LI-RM1

PAID MEDIA SPECIALIST / PPC MANAGER – OLDHAM £30,000 – £38,000 Oldham 12-Month Fixed Term Contract Supporting a busy, fast-growing business This is not a “boost a post and hope for the best” role. This is for someone who: understands performance marketing knows how to turn clicks into revenue and can actually see what’s working… and scale it If you live in Meta Ads, Google Ads, and dashboards that tell real stories… keep reading. THE ROLE You’ll be owning paid media across multiple channels — driving traffic, leads, and sales across a portfolio of brands. This is hands-on, data-driven, and results-focused. Day to day, you’ll be: Paid Social (Meta & LinkedIn) Planning and running campaigns across Facebook, Instagram & LinkedIn Building, testing, and optimising ads to drive leads and conversions Dialling in audiences, creatives, and messaging to improve performance Monitoring CTR, CPC, ROAS and making real-time improvements Google Ads / PPC Managing campaigns across Search, Display, PMax & Video Keyword research, ad group structure, and campaign builds Writing ad copy that actually converts (not just fills space) Monitoring performance and optimising bids, targeting, and spend Using GA4, tracking tools, and data to guide decisions E-Commerce PPC (Amazon & eBay) Managing marketplace campaigns to drive product visibility and sales Optimising keywords, bids, and budgets Monitoring ACoS, ROAS, and performance metrics Scaling what works, cutting what doesn’t WHAT YOU’LL NEED Strong experience across Paid Social and Google Ads Comfortable working with data, analytics, and performance metrics Experience with GA4, GTM, and conversion tracking Understanding of e-commerce platforms (Shopify, Amazon, eBay ideal) Ability to test, learn, and optimise campaigns continuously Commercial mindset — you care about results, not just activity WHY THIS ROLE? Because this isn’t a boxed-in marketing job. You’ll be: * Trusted to run campaigns properly * Given the autonomy to make decisions * Working in a role where performance actually matters * Able to make a visible impact on revenue * If you’re the kind of person who: checks performance before your morning coffee gets a buzz from improving ROAS and loves turning data into decisions You’ll do very well here. Forward Assist Recruitment is operating as an employment agency. Forward Assist Recruitment is an Equal Opportunities employer; we welcome applicants from all backgrounds

With a relentless commitment to excellence that is fueled by continuous collaboration, ongoing research and innovation across product chemistry, environmental sustainability, and historic building preservation, Lime Green Products ensure that their products consistently perform to the highest standa

Drive growth across a specialist product range including:. Are you a technical specialist with experience in.

Expert support is provided by a team of Applications Specialists, Product Sales Specialists, and Field Service Engineers to ensure customer satisfaction. This is a full-time, remote role for a Product Sales Specialist, focusing on our radiology products, that will require extensive and regular trave

At GBUK Group, a top 20 NHS supplier operating in over 45 countries, we’re growing fast, and we’re looking for an IV Product Specialist to help lead the way across the North East and Scotland. Product Specialist, Vascular Division. Delivering engaging IV product training, trials, and rollouts.

Provide product training and demonstrations to commercial customers. Join a world leading, specialist power tool brand in a field based role that strengthens the UK sales team by supporting their customers.

Provide product training and demonstrations to commercial customers. Join a world leading, specialist power tool brand in a field based role that strengthens the UK sales team by supporting their customers.

We are excited to be recruiting for a brand-new, part-time role (30 hours per week) on behalf of our client who are a growing import business! They are creating a dedicated compliance specialist position to ensure their products meet GPSR, WEEE, and packaging compliance standards. Product Compliance

Technical Support & Product Specialist. OverviewWe are seeking a dedicated and experienced Technical Support & Product Specialist to join our team in Manchester. Collaborate with the sales team to support customer needs and ensure seamless product integration.

Our client, a well-established Electronic Components Manufacturer specialising in connectors and electromechanical products, is seeking a Product Manager – Connectors to join their team on a permanent basis in Surrey. Experience in product management, product strategy, or market analysis. Experien

SC Johnson Professional have an exciting opportunity for an Product Innovation Specialistto join the team! You will join us on a full time, permanent, and in return, you will receive a competitive salary.

A leading lighting rental company in Greater London seeks an experienced Technical and Product Support professional. The ideal candidate has proven experience in servicing lighting equipment, excellent knowledge of Panalux products, and the ability to build strong working relationships.

Sign in to set job alerts for “Product Sales Specialist” roles. Exclusive Networks is the global cybersecurity go-to-market specialist that provides partners and end-customers with a wide range of services and product portfolios. As the Palo Alto Networks Product Sales Specialist you will be res

As a Product Risk Specialist, your mission is to lead the risk assessment and monitoring for the Securitisation and Asset-Backed Securities (ABS) portfolios. Act as a lead advisor during transaction screening, providing strategic structuring feedback to origination and product teams to optimize risk

A leading food manufacturing company in Greater London is seeking a Senior Product Development Manager.

A leading life sciences company in the UK is seeking a Product Sales Specialist for their Electron Microscopy Sample Preparation portfolio.

You'll work directly with customers to document their desired outcomes, complete product training, obtain documentation to help our Provisioning Specialists configure their Acoustic account, import their data, and roll out the product to their users. As an Onboarding Specialist you will support cust

A leading global investment firm is seeking a Collateral Production Specialist to join their marketing team in Greater London. Ideal candidates should have strong skills in content production, data analysis, and design software, along with a keen eye for detail.

A software solutions company based in Manchester is seeking a Product Support Engineer.

This role is highly customer-focused, providing technical support and managing relationships with colleagues using in-house Product applications. The ideal candidate has 2-3 years of customer service experience and familiarity with Microsoft PowerPoint and Excel, ensuring prompt and clear communicat

Product Solution Sales Specialist - Near Patient Care (Point of care). As a Product Solution Sales Specialist, your role is integral to driving the adoption of high-value solutions that enable better patient outcomes, improve healthcare delivery, and strengthen Roche’s leadership position in the h

A leading technology company is seeking a Payroll Product Sales Specialist to join their Global Payroll Center of Excellence team.

A leading organisation in defence technology is seeking a Product Cyber Security Specialist to provide cyber security expertise throughout the systems engineering lifecycle.

Adobe Product Sales Specialists partner with Adobe Account Executives and the broader team to help grow existing business. Lead Sales Execution – Proactively initiate value‑creating conversations, identify new opportunities to build pipeline in collaboration with account and partner teams, and i

Payroll Product Sales Specialist - Workday Center of Excellence (CoE) page is loaded## Payroll Product Sales Specialist - Workday Center of Excellence (CoE)remote type: Flexlocations: United Kingdom, Londontime type: Full Timeposted on: Posted Yesterdayjob requisition id: JR-0104836**Your

SMT GB is searching for a dedicated Product & Application Specialist focused on Road Equipment. In this role, you will leverage your technical expertise and knowledge to support our sales teams and customers, ensuring they fully understand and can utilise our comprehensive range of road equipment pr

A global cybersecurity company is seeking a Palo Alto Networks Product Sales Specialist to support reseller activities and develop partnerships.

A global asset management firm seeks a Senior Product Specialist to enhance its Clean Energy investment business. The ideal candidate should have 8 to 10 years of experience in product development and investor relations, with solid knowledge of the clean energy market. Responsibilities include leadi