Trabajos chemical en Jacksonville, FloridaCrear alertas

Job Description Company Overview Rubenstein Law has been getting justice for personal injury victims since 1988. Founder Robert Rubenstein and CEO Nicole Armstrong have grown Rubenstein Law to over 50 Attorneys, including 20 Partners, 12 board-certified litigators, and over 400 supporting professionals. Today, Rubenstein Law is recognized as a premier name in Personal Injury, representing clients in a variety of case claims, including auto injuries, slip and fall injuries, catastrophic injuries, premise liability, medical malpractice, child & birth injury, motorcycle accident cases, and traumatic brain injury (TBI) cases. Rubenstein Law's Mass Tort division represents clients nationwide in defective products, dangerous drugs, and chemical cases. With a strong reputation for success and billions of dollars won for clients, Rubenstein Law continues to grow to meet the needs of victims nationally. As the Firm expands, Rubenstein Law is committed to providing every single client with the excellent care and attention that has built the Firm's reputation and success. Job Summary The Paralegals work alongside attorneys to enforce and defend clients’ legal rights by drafting pleadings and motions; calendaring all events timely and within their due dates; participating in client meetings and maintain client contact; create and monitor deadlines for case progression; trial preparation; and finalizing settlement agreements. Responsibilities and Duties • Managing a caseload from initial filing through trial and post-trial, • Draft and file legal documents and pleadings in State and Federal court, • Draft and file discovery and manage discovery compliance, • Communicate in a clear and concise manner with team members, clients, opposing counsel, judicial employees/clerk, and other legal professionals, • Coordinate, schedule and calendar meetings, case related deadlines, notice hearings, depositions, and other litigation related proceedings, • Manage Attorney’s calendar and assist with attorney travel arrangement when needed, • Provide excellent legal support to the team and meet deadlines in a fast-paced environment, • Assist with trial preparation (trial binders, exhibits, redacting, etc.), • 2+ years of Personal Injury Litigation experience preferred, but not required, • Excellent client communications skills, • Strong multitasking skills, highly organized, and detail oriented, • Able to excel in a fast-paced work environment, take direction and work with little supervision, • Able to manage a large caseload and comply with deadlines, • Knowledge of State and Federal court statutes, rules, and procedures, • Familiar in Microsoft Word, Outlook, and the ability to become proficient in firm technology programs, • Familiar with legal terminology, court proceeding and drafting pleadings, discovery, and legal documents, • Familiar with court procedures, courtMap, JAWS and e-filing via e-portal, • Paid Time Off (PTO) plus 8-paid holidays, • Staff and Attorney bonuses, • Medical Benefits (Health, Dental, Vision, STD & LTD, and other medical coverages), • Group and Optional Life insurance, • Employee Assistance Programs, • 401(k) with company matching #P1 Powered by JazzHR 3lD4lZYSHl

\n Why Mayo Clinic\n\n\n Mayo Clinic is top-ranked in more specialties than any other care provider according to U.S. News & World Report. As we work together to put the needs of the patient first, we are also dedicated to our employees, investing in competitive compensation and comprehensive benefit plans – to take care of you and your family, now and in the future. And with continuing education and advancement opportunities at every turn, you can build a long, successful career with Mayo Clinic.\n\n\n \n\n\n Benefits Highlights \n \n • Medical: Multiple plan options.\n, • Dental: Delta Dental or reimbursement account for flexible coverage.\n, • Vision: Affordable plan with national network.\n, • Pre-Tax Savings: HSA and FSAs for eligible expenses.\n, • Retirement: Competitive retirement package to secure your future.\n \n Responsibilities An Imaging Technician III maintains complex medical equipment through effective implementation of the Mayo Clinic Medical Equipment Management Plan. The technician must demonstrate technical skills and tasks associated with the installation, maintenance, calibration, repair and QA of x-ray, imaging, nuclear medicine, radiotherapy, and imaging-related systems typically found in Radiology, Surgery and Cardiology. Technicians in this position must be exceptionally customer focused with outstanding communication and interpersonal skills. They must be able to prioritize service calls appropriately and adhere to Mayo policy and procedure. The technician must adhere to rules, regulations, and policies regarding radiation safety, stored energy safety, and contingency plans in the event of equipment failure. They must also carefully monitor the potential for radiation exposure and work to eliminate unnecessary exposure. They must have advanced analytical skills and be able to solve very complex technical issues in a timely manner. Service calls are communicated to the technician through HTM Leadership, HTM Support Specialists, or a CMMS dashboard. Emergent calls directly from the customer often require a rapid response time. On-call, overtime, and non-standard shifts will be required, as well as travel to other Mayo Clinic sites and applicable vendor training. The technician must be committed to continuously improving their knowledge to develop a mastery of increasingly complex equipment and to support the mission of Mayo Clinic. A Technician III will have a mastery of imaging repair principles, can demonstrate success in the most complex of imaging repairs, and will often work with and share knowledge with less experienced technicians. Qualifications Bachelor’s degree in Biomedical Electronics/Healthcare Technology Management, Electronics, Mechatronics, or Engineering (mechanical/computer/electronics) and 3 years of related experience; or an Associate’s degree in Biomedical Electronics/Healthcare Technology Management, Electronics, Mechatronics, Engineering (mechanical/computer/electronics), or technical discipline and 5 years of related experience; or U.S. Military training in biomedical electronics, mechatronics, or engineering (mechanical/computer/electronics) and 5 years of related experience. Related experience includes role-relevant equipment repair with a demonstrated increase in responsibility and exposure to highest complexity equipment and must include at least 3 years of maintaining imaging or x-ray systems. Preferred Qualifications and Experience include: • AAMI ACI Certification: AAMI-CBAT, CBET, CRES, CHTM, CISS, CCEACCE-HTCC, CCE, • Vendor training on relevant equipment, • Knowledge of safe work practices around biological, chemical, radiation and energy hazards., • Familiarity with test and QA tools/software needed to perform medical equipment maintenance Exemption Status Nonexempt Compensation Detail $35.99 - $50.39/ hour Benefits Eligible Yes Schedule Full Time Hours/Pay Period 80 Schedule Details Day Shift with flexible hours including on-call and weekend work as needed. Weekend Schedule As needed. International Assignment No Site Description \n Just as our reputation has spread beyond our Minnesota roots, so have our locations. Today, our employees are located at our three major campuses in Phoenix/Scottsdale, Arizona, Jacksonville, Florida, Rochester, Minnesota, and at Mayo Clinic Health System campuses throughout Midwestern communities, and at our international locations. Each Mayo Clinic location is a special place where our employees thrive in both their work and personal lives. Learn more about what each unique Mayo Clinic campus has to offer, and where your best fit is. \n\n\n \n \n Equal Opportunity\n \n \n All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, protected veteran status or disability status. Learn more about the "EOE is the Law". Mayo Clinic participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization.\n \n Recruiter Miranda Grabner

Jet-Set Tanker truck driver Average pay: $1,190-$1,460 weekly Home time: Every three weeks Experience: 3 months or greater CDL experience Overview • Travel to various locations across the country to haul freight., • Paid flights to and from destinations., • Haul liquid chemical freight with tanker trailers., • 10 loads per week.Pay and bonus potential, • Mileage pay, plus hourly pay while on duty, not driving., • Weekly performance pay., • Earn up to $3 more per hour by obtaining additional CDL certifications., • Paid orientation., • Paid time off after 6 months, plus 6 days of holiday pay per year.Qualifications, • Valid Class A Commercial Driver's License (CDL)., • Tanker endorsement required at time of hire., • HazMat endorsement required at time of hire., • TWIC card required at time of hire., • Must be willing to fly and have a REAL ID driver's license or valid passport., • Medical, dental and vision insurance., • 401(k) savings plan with company match., • Unlimited referral bonuses., • $200/month tuition reimbursement (up to $7,000) for qualified drivers., • All earned frequent flyer miles from company-paid flights are yours to keep for personal use., • HazMat endorsement reimbursed upon receipt., • Credit for Military Experience and Military Apprenticeship programs, plus more military benefits., • Leading equipment and technology specs designed for driver comfort., • See full list of driver benefit package.More reasons to choose Schneider Dedicated Tanker driving, • Top-notch equipment – Operate the best tractors, trailers and tanker-specific equipment. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit . Job Company Driver Schedule FULLTIME Sign On Bonus PI282952027

Description Summary: This Job performs all routine and complicated laboratory procedures including specimen processing and handling, testing of patient specimens, calculating, and reporting of results, performance of quality control procedures, operation and maintenance of instruments and equipment, assisting in the development of new procedures and protocols, may perform phlebotomy and other patient-oriented tasks, and may perform other related duties as requested or directed. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Performs all routine and complicated laboratory procedures in the primary section to which assigned about age or sex specific values. Operates, maintains, and troubleshoots laboratory instrumentation and equipment and makes minor repairs as necessary or notifies Bio-med as needed. Must cross-train to other laboratory sections as needed. Assures that the laboratory's quality control program is properly followed. Calculates, enters, and/or verifies results of laboratory procedures. Utilizes the Laboratory Information System. Provides notification and documentation of critical laboratory values obtained. Processes patient specimens, including collection, handling, and distribution always cognizant of minimal pediatric specimen volumes (when required). Participates in the evaluation, development, and implementation of new or updated testing procedures and protocols. Demonstrates competence to perform assigned patient care responsibilities in a manner that meets the population-specific and developmental needs of patients served by the department. Appropriately adapts assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, age specific and other developmental needs of each patient served. Demonstrates adherence to the CORE values of CHRISTUS Health. Must complete all required compliance and regulatory tasks and follow all applicable policies and procedures. Performs other duties as assigned. Job Requirements: Education/Skills Bachelor’s Degree or higher in a chemical, physical, biological or clinical laboratory science or medical technology from an accredited institution or equivalent laboratory training and experience meeting the requirements defined in the CLIA regulation 42CFR493.1489 (includes U.S. Military laboratory training courses of at least 50 weeks) OR Education that has been evaluated by an acceptable credentialing agency and deemed equivalent to a US Bachelor’s degree in a chemical, physical, biological or clinical laboratory science or medical technology. Experience No experience required for graduates of a clinical laboratory training program approved or accredited by NAACLS, or other organizations approved by HHS. OR One year of approved clinical laboratory experience, which must include a clinical rotation through the following sections of the laboratory: Blood Banking, Microbiology, Chemistry, and Hematology, Immunology, and Urinalysis/Body Fluids in the U.S. or with an accredited laboratory within the last 5 years. Licenses, Registrations, or Certifications Must possess Certification for MT, MLS, CLS, or MLT from ASCP, AMT, AAB, or HEW/HHS If certification with an expiration date is held, the certification must be maintained and kept current Louisiana requires State Licensure New Graduate that is Board Certified or eligible (must complete Board Certification in 1 year of hire, Louisiana excluded) Work Schedule: 4 Days - 10 Hours Work Type: Full Time

Company Driver | Tanker Location: Jacksonville, FL Company: Sherman Brothers Heavy Trucking Pay: $1,500 to $2,000 per week Route Type: otr Start Date: ASAP About the Position Sherman Bros Trucking is a family-owned company that has been providing safe and reliable transportation services for over 50 years! We specialize in hauling liquid bulk hazmat products in our chemical tanker fleet. OTR, regional, and dedicated opportunities available depending on geo location and experience. Our drivers can average up to $2,000+ per week. ALL of our drivers are known by name and treated like family. We offer medical, dental and vision benefits, great home time, 401K, and more. We also have a lease purchase plan available to all company drivers. Call to find out all the benefits of being a driver for Sherman Bros! 541-998-7225 or apply directly on drive4sbi.com. Requirements Valid class A license Current medical card Tank & Hazmat endorsement Tanker experience required

Company Driver | Tanker Location: Jacksonville, FL Company: Sherman Brothers Heavy Trucking Pay: $1,500 to $2,000 per week Route Type: otr, regional Start Date: ASAP About the Position Sherman Bros Trucking is a family-owned company that has been providing safe and reliable transportation services for over 50 years! We specialize in hauling liquid bulk hazmat products in our chemical tanker fleet. OTR, regional, and dedicated opportunities available depending on geo location and experience. Our drivers can average up to $2,000+ per week. ALL of our drivers are known by name and treated like family. We offer medical, dental and vision benefits, great home time, 401K, and more. We also have a lease purchase plan available to all company drivers. Call to find out all the benefits of being a driver for Sherman Bros! 541-998-7225 or apply directly on drive4sbi.com. Requirements Valid class A Current medical card Tank & hazmat endorsement TWIC card preferred Tanker experience

Company Driver | Dry Bulk Location: Jacksonville, FL Company: Schneider Pay: Competitive weekly pay (inquire for details) Start Date: ASAP About the Position Jet-Set Tanker truck driver Average pay: $1,190-$1,460 weekly Home time: Every three weeks Experience: 3 months or greater CDL experience Overview Travel to various locations across the country to haul freight. Paid flights to and from destinations. Haul liquid chemical freight with tanker trailers. 10 loads per week. Pay and bonus potential Mileage pay, plus hourly pay while on duty, not driving. Weekly performance pay. Earn up to $3 more per hour by obtaining additional CDL certifications. Paid orientation. Paid time off after 6 months, plus 6 days of holiday pay per year. Qualifications Valid Class A Commercial Driver's License (CDL). Tanker endorsement required at time of hire. HazMat endorsement required at time of hire. TWIC card required at time of hire. Must be willing to fly and have a REAL ID driver's license or valid passport. Minimum 3 months of Class A driving experience. Need one or more of your endorsements, or unsure if you qualify? Call us at 800-447-7433, and we can talk you through it. Additional benefits Medical, dental and vision insurance. 401(k) savings plan with company match. Unlimited referral bonuses. $200/month tuition reimbursement (up to $7,000) for qualified drivers. All earned frequent flyer miles from company-paid flights are yours to keep for personal use. HazMat endorsement reimbursed upon receipt. Credit for Military Experience and Military Apprenticeship programs, plus more military benefits. Leading equipment and technology specs designed for driver comfort. See full list of driver benefit package. More reasons to choose Schneider Dedicated Tanker driving Top-notch equipment – Operate the best tractors, trailers and tanker-specific equipment. Safety – Whatever bulk freight you haul, we provide the training so you’re prepared to deliver it. Schneider's inclusive culture Our history has taught us that treating everyone with dignity and respect is vital to our ongoing success. We embrace and seek out diversity that is inclusive of thought, race, ethnicity, national origin, sex, gender, gender expression, age, religion, sexual orientation, ability, medical condition, veteran or military status, experience and background. This diversity and openness ensures all associates have equal access to opportunities and resources to contribute fully to the organization's success, and it fuels innovation, improves strategic thinking and cultivates leadership. Any applicant may request a reasonable accommodation to complete a job application, pre-employment testing, or job interview or to otherwise participate in the hiring process consistent with the Americans with Disabilities Act (ADA) by contacting their Recruiter, Human Resources Business Partner, and/or Human Resources Leave Administration. Schneider uses E-Verify to confirm the employment eligibility of all newly hired associates. To learn more about E-Verify, including your rights and responsibilities, please visit . Job Company Driver Schedule FULLTIME Sign On Bonus PI282952048

Senior Remediation Engineer / Project Manager Consulting | Environmental & Infrastructure Design We are seeking a highly experienced Remediation Engineer / Project Manager to lead complex environmental remediation projects from investigation through design and implementation. This role is ideal for a licensed Professional Engineer who thrives in a consulting environment and enjoys technical leadership, client engagement, and project delivery. Key Responsibilities • Manage and execute remediation projects including site investigation, feasibility studies, remedial design, and construction support., • Serve as Project Manager for multi-disciplinary teams, ensuring schedule, budget, and quality control., • Lead preparation and review of technical reports, remedial action plans, and regulatory submittals., • Interface with clients, regulators, and stakeholders., • Provide technical mentorship to junior staff., • Bachelor’s degree in Civil, Environmental, Chemical Engineering or related field., • Professional Engineer (PE) license required., • 6+ years of experience in environmental remediation consulting., • Strong background in contaminated site assessment and remedial design., • Demonstrated project management experience., • Excellent written, verbal, and client-facing communication skills.

Advanced Environmental Laboratories, Inc. (AEL) is Florida's largest environmental, chemical, analytical testing laboratory network with eight locations in the State. We are a professional services firm working mostly with government agencies, utilities, and engineering firms. We are looking for a full-time highly organized Administrative Assistant and Accounts Payables/Payroll Specialist for our AEL Headquarters in Jacksonville, Florida. The ideal candidate will be responsible for providing administrative support to ensure efficient operation of the office. The Administrative Assistant will support managers and the corporate team through a variety of tasks related to organization and communication. The candidate must be comfortable with general office operations, scheduling, and have excellent communication skills. They must also have some experience dealing with Accounts Payables and Payroll related tasks which require high attention to detail and advanced computer skills. The position reports directly to the President of AEL and our Business Manager but also works closely with the entire corporate team. Duties and Responsibilities: Administrative Assistant b. Act as the point of contact for internal and external clients. • Provides administrative support to ensure efficient office operations., • Maintains filing system., • Maintains a clean and organized office environment., • Works with sensitive information with discretion to maintain confidentiality, security and ensure compliance with privacy policies and regulations., • Presents a positive and professional image for the organization., • Ordering of office supplies and other related items., • Organizes travel plans (booking hotels, travel arrangements) for corporate and management team., • Assists with reaching out to client credit references during new client onboarding when credit terms are requested. b. Reconciling monthly statement. • Assisting with the processing of AMEX Orders. Accounts Payables/Payroll Specialist • Maintains purchase order system (PLANERGY), • PO Approval Queue, • Accurately invoices against received POs, • Maintains current item pricing, • Add/Remove Items as needed, • Sends out bi-weekly reporting on unreceived purchase orders to the management team., • Monitor AP Outlook Inbox, • Monitor PLANERGY MS Teams Chat, • Charges expenses to accounts and cost centers by analyzing invoice/expense reports; recording entries., • Issues purchase order amendments., • Verifies vendor accounts by reconciling monthly statements and related transactions., • Runs bi-weekly payroll for the company, • Protects organization’s value by keeping information confidential., • Updates job knowledge by participating in educational opportunities. Qualifications • 1-2 Years of Office Experience, • Interpersonal skills, professional and courteous demeanor, excellent office and phone etiquette, and the ability to diffuse tense situations. i. Teams ii. Excel iii. Outlook b. Some accounting related system i. Preferred – QuickBooks Online c. Some payroll related system i. Preferred - Paychex d. Some purchase order system i. Preferred - PLANERGY e. Adobe Acrobat • Ability to work well independently and in collaboration with others, • Attention to detail and problem-solving skills is a must., • Excellent written and verbal communication skills., • Solid understanding of basic accounting principles., • Solid understanding of basic payroll operations., • Ability to communicate effectively with vendors and internal stakeholders. PREFERRED EDUCATION • Degree in Business, Accounting, Finance or related field, • 1-2 years of experience with QuickBooks Online or equivalent Accounting System, • 1-2 years of experience with Paychex or equivalent Payroll System, • 1-2 years of experience with PLANERGY or equivalent Purchase Order System Benefits This position is full time, and eligible for all our benefits as follows: • Paid Time Off (PTO): Annual vacation and personal days., • Floating Holiday: One additional paid day off per year., • Paid Holidays: 7 company-observed holidays., • Health Insurance: Medical, vision, and dental coverage., • Flexible Spending Account (FSA): Pre-tax account for eligible medical and dependent care expenses., • Retirement Plan: 401(k) with company match (up to 4%), • Insurance Coverage: Short-term disability, long-term disability, and life insurance fully paid by AEL., • Employee Assistance Program (EAP): Confidential counseling and resources available at no cost to employees. In order to be considered for the position, all applicants must apply through AEL's job application website at:

Sr Design Engineer – Wastewater Sludge Treatment Design / POTWs / Remote / Travel #4981 Very Successful and established EPC / GC is seeking a Wastewater Sludge Treatment Design Engineer to specialize in publicly owned treatment works (POTWs) projects. You will lead the design, upgrade, and optimization of sludge handling systems for municipal wastewater plants, ensuring cost-effective, reliable, and fully compliant solutions for thickening, digestion, dewatering, and biosolids management. This role supports public infrastructure goals—delivering safe, sustainable, and transparent projects that meet EPA, state, and local mandates while maximizing value and protecting public health. Responsibilities -Design and specify sludge treatment processes for municipal POTWs, including gravity thickeners, DAF units, anaerobic/aerobic digesters, belt presses, centrifuges, screw presses, and thermal dryers—optimized for public-sector budgets and long-term reliability. -Perform process modeling, solids mass balances, and hydraulic sizing to achieve Class A or Class B biosolids quality, odor control, and energy-efficient operation under strict public oversight. -Recommend practical, low-maintenance sludge management strategies—land application, composting, or biogas-to-energy—aligned with local ordinances, community acceptance, and regional disposal availability. -Prepare engineering reports, specifications, and cost estimates -Ensure full compliance with EPA 40 CFR Part 503, NPDES permits, state biosolids rules, and local public works standards; coordinate with regulatory agencies during design review and permitting. -Support construction, startup, and operator training—delivering clear documentation, performance guarantees, and handover packages. -Evaluate existing POTW sludge systems for upgrades, focusing on energy savings, reduced O&M costs, and resilience to population growth or climate impacts. -Collaborate with OEMs and service providers, municipal engineers, operators, and elected officials to balance technical performance with fiscal responsibility and public communication. Requirements -Bachelor's degree in Civil, Environmental, or Chemical Engineering (Master's preferred). -Professional Engineer (PE) license or ability to obtain within 12 months. -5+ years of direct experience designing sludge systems for publicly owned wastewater treatment facilities (municipal consulting and/or agency background strongly preferred). -Deep knowledge of municipal biosolids regulations, and community-sensitive design (odor, noise, truck traffic). -Ability to manage tight timelines, and change orders typical of projects. -Ability to do overnight travel 20 to 30% to project sites, client, vendors, and company meetings -Must have strong written and verbal communications skills -Have demonstrated professional client-facing experience and skills Compensation and Benefits Summary Base Salary, depending on credentials, is $100,000–$170,000 annually, plus company and individual performance bonus, ESOP, and year-end holiday bonus. Included Benefits are medical/dental/vision, 401(k), generous PTO, professional dues reimbursement, and tuition assistance for continuing education. Key words: Biosolids sludge cake treated sewage wastewater solids sewage sludge humanure organic residuals nutrient-rich muck stabilized effluent solids fecal matter byproduct sewage cake, digested solids, recycled organics, bio-waste, sludge paste

Leading Manufacturer with Tier 1 clients // Growing + Excellent compensation package + generous Bonus structure! This Jobot Job is hosted by: Henry Chung Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $175,000 - $260,000 per year A bit about us: We are working with a leading company that develops, designs, and manufactures highly engineered materials and services to Top tier 1 customers, within Automotive, Consumer Electronics, Appliances, and more. As they continue to expand their footprint, we are looking to help expand their team! If you're looking for a great organization that can offer competitive pay + bonuses, this is the firm for you. Why join us? • Leading pay + bonus scales, • Bonus scales being flexible, • Hybrid flexibility / work from home schedules, • Close knit teams // great room for advancement Job Details Recommend improved materials to customers, demonstrating how changes can reduce costs and enhance performance. Engage with current and prospective customers to understand their needs and goals. Provide product demonstrations, answer technical questions, and clearly communicate the value proposition. Independently plan and manage territory coverage to ensure effective development and meet or exceed objectives. Serve as the voice of the customer by working closely with engineering teams to incorporate feedback, prioritize features, and help shape the product roadmap. Collaborate with internal technical staff and R&D to develop tailored solutions for each customer. Qualifications Master’s degree in Chemical Engineering 6+ years of experience supporting Tier 1 customers in a technical support or field applications role. Local to the Bay Area (ideally) - and be able to work out of the HQ office Strong technical foundation with hands-on experience or deep understanding of advanced material solutions. Excellent written and verbal communication skills. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Ground/Water Treatment & Technology, LLC (GWTT) is a leading environmental contractor company. GWTT provides Construction Dewatering, remediation and environmental construction services, including; dewatering systems design, manufacture, installation and operation. Additionally, we offer design/build services for temporary and permanent treatment systems, and operation and maintenance services for a variety of soil, groundwater and wastewater treatment systems. Typical projects include groundwater depression and management for major construction projects, soil vapor extraction, air stripping, carbon adsorption, metals precipitation, pH neutralization, thermal/catalytic oxidation and in-situ chemical oxidation. GWTT provides a challenging, growth-oriented work environment, in which the right candidate will have the opportunity to develop and understand the necessary technical and managerial skills to excel in today’s competitive market. GENERAL PURPOSE Under supervision, performs Deliveries, setups, maintenance and/or repair of groundwater, industrial water treatment and vapor equipment along with company owned facilities and assets as directed. Responsibilities include the following: • Assist in the repair and maintenance of systems and troubleshoot and correct minor electrical, mechanical and piping problems as experience and training allows and as directed by the Operations manager. Pull, repair, and analyze filtration equipment as necessary to complete required repairs. Assist in the installation of new rental systems and other water and vapor system maintenance related projects., • Responds to maintenance schedules for equipment and vehicles. Assures the proper maintenance duties are performed., • Assists with the proper maintenance of equipment including media extraction using industrial vacuum equipment. may drive a company vehicle with trailer and is responsible for appearance, maintenance and organization of vehicle and tool inventory., • Works with other employees and assists in coordinating the efficient use of allocated labor and supplies for day-to-day requirements., • Responsible for keeping maintenance records up-to-date including work orders and related forms., • May assist in other duties such as equipment cleaning activities, painting, project punch-out, loading and unloading materials, fabrication of new equipment., • Operate forklifts in the day- to - day operations., • On site service residential water treatment systems periodically, including after hour responses. Travel is required for this position. Candidates must possess a valid driver’s license and a clean driving record and must pass a pre-employment background check and drug screen. Some experience in the environmental field is preferred although we are willing to train the right individual who is dependable, self-motivated, a team player and goal-oriented. OSHA 40-hour training is preferred but will be provided to the right candidate. We offer competitive pay based on experience and skills, opportunities for bonus and advancement, excellent benefits including medical and dental plans, paid holidays and vacations and a 401k plan. Ground/Water Treatment & Technology, LLC is an Equal Opportunity Employer/Veterans/Disabled. Visit our website at for more information.

Job Description JOB SUMMARY: Reporting to the Safety and Compliance Manager, the Rail Health and Safety Coordinator is responsible for driving safety and health management throughout the rail organization through development and reinforcement of “best practice” operating procedures. This position will support Drummac, as directed by the Safety and Compliance Manager. JOB RESPONSIBILITIES: • Assists in administering Drummac’s training and development programs to ensure compliance with all federal, state, and local regulatory safety requirements., • Works closely with Safety, Compliance and Operations management to develop pertinent on-the-job or other “value-added” training appropriate to the needs of each business unit they support., • Works in collaboration with Human Resources and Safety training departments to implement New Hire Orientation., • Assists with the developing, updating and maintaining of the Corporate Health and Safety Manual, as well as other departmental programs and standard operating procedures (SOP)., • Creates site-specific Health and Safety Plans per client request or project requirements., • Performs hazard evaluations of jobsites, tasks and chemicals including creating a Job Hazard Analysis (JHA) and assisting with proper PPE selection., • Reviews and analyzes job-specific worksheets, JHAs, and other paperwork to complete a gap analyses, • Performs onsite safety coverage and other project-specific needs requiring safety oversight., • Performs Safety Services project management and client communications., • Conducts site safety inspections to audit conditions and safe work practices at jobsites., • Supports supervisors and managers during incident investigations and root-cause analyses as necessary., • Assists with inspections, maintenance, and familiarization of safety-sensitive equipment, such as atmospheric monitors, SCBAs, fall protection equipment, etc., • Occasionally engages in strenuous physical labor including pushing, pulling, and frequently lifting and moving up to 50 lbs., • Occasionally requires grasping, reaching, crawling, stooping, and crouching in confined spaces. Requires traversing and ladder ascent/decent to access different areas of jobsite. Must be able to remain stationary for long periods of time., • Employment is contingent upon a successful pre-hire medical exam., • Works in various temperatures indoors and outdoors in all weather conditions, including extreme heat and cold while wearing various levels of personal protective equipment., • Works in atmospheres and locations with the potential for exposure to various chemical, physical and biological agents, some of which may be hazardous, toxic, or corrosive., • Works in potentially elevated noise levels, confined spaces, including lifting in areas of low clearance., • Working at elevations including working from ladders and scaffolding., • Must be able to work in excess of regularly scheduled hours when necessary; on occasion this will require work during weekends and holidays., • Ability to work in excess of regularly scheduled hours when necessary. This position will require regular work outside of traditional business hours., • Preferred experience in the construction and/or Rail industry, • Strong working knowledge of OSHA 1910, and 1926 standards, and other applicable federal, state, and local regulatory standards., • Strong communication (both written and verbal), analytical and persuasive skills and ability to interact effectively with all levels of clients, employees, and management., • Must be multi-task oriented and have strong time management, organizational, and problem-solving skills and to manage multiple departmental priorities and requirements., • Medical, Dental, and Vision Insurance, • Company paid Life, AD&D, and Long-Term Disability Insurance Plans, • Employee Assistance, Health Advocate, and Wellness Programs, • Generous 401(k) Plan with 4% match, • Company paid Financial Advice Program, • Paid Vacation based on years of service, • Generous Paid Time Off

Amentum, a global leader in critical mission support, engineering, technology, and national security solutions, is seeking a Boiler Plant Mechanic to support a government contract award based in Kings Bay, Georgia. Under general direction and according to diagrams, operation manuals and manufacturers' specifications; the Boiler Plant Mechanic/Operator tends one or more boilers to produce steam or high-temperature water; tends one or more centrifugal chillers; tends one or more low-pressure and high-pressure air compressors; tends all related auxiliaries, pumps, regulators, meters, blowers, fans, de-mineralizers, softeners, electrical, mechanical and pneumatic control devices. The Boiler Plant Mechanic/Operator also uses the computer system for operations in order to meet government and manufacturer's specifications. Maintains a log of various aspects of operations. * Additionally, according to diagrams, operation manuals, and manufacturer's specifications, performs complex repairs and overhaul of central heating plants, their components and auxiliary equipment; including automatic or manually controlled boilers, burners, pumps, regulators, meters, blowers, fans, de-mineralizers; electrical, mechanical, and pneumatic control devices and air compressors. * Performs chemical analysis of boiler water and cooling towers and chemical treatment as required; determines fuel requirements and maintains all related pumps, valves, and piping. * Inspects and runs preventive maintenance routines and safety checks according to the government and manufacturer's specifications. * Uses hand tools, power tools, and precision measuring and testing equipment and devices. * Inspects, repairs, and replaces defective parts and components as necessary to ensure continuous and safe operation. * Assists government personnel during the annual certification inspections. * Performs other duties as assigned. Minimum Qualifications * High school education or equivalent * Four (4) years experience in repair, operation, and overhaul of boiler plant and related equipment, both stationary and mobile * Must understand chemical treatment of boilers and cooling towers * Knowledge of the use of general and specialized tools to perform necessary repair operations * Ability to troubleshoot systems and components * Must possess the standard tools of the trade * Must possess a valid state driver's license * Must have and wear hard-toed safety shoes that meet ASTM F2413-05 standards. * Successful candidate will be subject to a government security investigation and must continually meet eligibility requirements for access to all areas of Naval Submarine Base Kings Bay. * Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance. Compensation Details: 36.71 Original Posting: 03/02/2026 - Until Filled Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at ___.

Position Summary: We are seeking an experienced, board-certified Dermatologist to join our growing practice. The ideal candidate will provide comprehensive medical and surgical dermatologic care to a diverse patient population. This individual should demonstrate clinical excellence, strong communication skills, and a commitment to providing patient-centered, high-quality dermatologic care. Key Responsibilities: • Diagnose and treat conditions related to the skin, hair, and nails, • Perform medical and surgical dermatology procedures (e.g., biopsies, excisions, cryotherapy, laser treatments), • Provide cosmetic dermatology services as applicable (e.g., Botox, fillers, chemical peels, laser resurfacing), • Develop and implement individualized treatment plans for patients, • Educate patients on skin health, preventive care, and treatment options, • Maintain accurate and timely documentation in the electronic medical record system, • Collaborate with other healthcare professionals and staff to ensure high-quality patient care, • Stay up to date with the latest developments in dermatology through continuing education and professional developmentQualifications & Requirements:, • Doctor of Medicine (MD) or Doctor of Osteopathic Medicine (DO) from an accredited institution, • Completion of an accredited Dermatology residency program, • Board certification or eligibility in Dermatology (American Board of Dermatology or equivalent), • Active and unrestricted medical license in the state of Florida, • Minimum of 2–5 years of post-residency dermatology experience preferred, • Strong clinical skills in both medical and procedural dermatology, • Excellent interpersonal and communication skills, • Commitment to patient satisfaction and quality care, • Expertise in cosmetic and aesthetic dermatology procedures, • Experience in Mohs surgery or surgical dermatology, • Competitive salary, • Comprehensive health, dental, and vision insurance, • Malpractice coverage, • Paid time off (PTO), CME time and allowance, • Supportive and collaborative clinical environment

Education/Skills Bachelor's Degree or higher in a chemical, physical, biological or clinical laboratory science or medical technology from an accredited institution or equivalent laboratory training and experience meeting the requirements defined in the CLIA regulation 42CFR493. OR One year of appro

Military laboratory training courses of at least 50 weeks) OREducation that has been evaluated by an acceptable credentialing agency and deemed equivalent to a US Bachelor's degree in a chemical, physical, biological or clinical laboratory science or medical technology. OR One year of approved

The Melting Pot - 7860 Gate Pkwy - [Busser / Kitchen Staff / FT & flexible PT schedules available] - As a Dishwasher @ The Melting Pot, you'll: Perform dish machine set-up and maintenance; Use proper pre-soaking procedures, cleaning fondue pots, cleaning fondue forks, and following proper chemical u

BJ's Restaurant & Brewhouse - Up to $16.Responsibilities: Wash, clean, and store dishes pots, pans, cooking equipment, utensils, and containers; Keep the dish room, station, and equipment clean and organized; Set up the dish machine and inspect and test sanitizer for proper temperature or chemical m

JOB DESCRIPTION Job Summary Provides executive level strategy and leadership to a multidisciplinary team of healthcare services professionals, in some or all of the following functions: utilization management, care management, care transitions, behavioral health, long-term services and supports (LTSS), and other clinical programs. Leads team responsible for assessing, facilitating, planning and coordinating integrated delivery of care across the continuum. Partners with executive leadership team to provide cohesive direction towards company goals. Contributes to overarching strategy to provide quality and cost-effective member care. Essential Job Duties • Supports executive strategy development, vision and direction for healthcare services teams including care management, care coordination, transitions of care, utilization management (prior-authorization, inpatient review), behavioral health, long-term services and supports (LTSS), and other member care focused programs. Demonstrates accountability for performance and financial results, and keeps executive leadership apprised. *Collaborates with the chief medical officer and medical director team to develop and implement processes to effectively manage clinical policies to meet health care cost and quality targets. *Collaborates with healthcare services and clinical operations teams at the corporate and/or health plan level to achieve successful implementation of Molina clinical strategy and direction. *Develops and implements effective and efficient standards, protocols, processes, decision support systems, reporting and benchmarks that support ongoing improvements of clinical operations functions and promote quality cost-effective health care for Molina members. *Mentors, guides and develops skills of healthcare services leaders and team members in a consistent and effective manner. *Develops initiatives to achieve budgeted reductions in medical expenses and increases in quality scores. *Develops health care services department budget and ensures budget targets are met. *Manages implementation of analytical studies that quantify the benefits of healthcare services programs to ensure that resources are appropriately allocated, operational controls exist, and efficiencies are maximized. *Facilitates integration of care coordination, care transitions, long-term care, behavioral health, chemical dependency and other special programs. • Continually refines operational processes and champions review of team processes, workflows and activities., • Articulates project requirements and anticipated outcomes to the Molina project management office for identified projects/strategies to improve the efficiency of clinical operations teams to meet cost and quality goals. *Accountable for ensuring compliance with contractual, accreditation and regulatory requirements for all healthcare services teams. *Participates personally or assigns appropriate staff to Molina quality committees and external community committees to represent the healthcare services department. *Ensures effective interdepartmental collaboration and interaction between healthcare services staff and other departments. *Ensures monthly auditing of healthcare services staff is performed and appropriate actions and/or coaching occur. *Demonstrates oversight of clinical training activities and outcomes. *Demonstrates accountability for healthcare services related delegation oversight monitoring. Required Qualifications • At least 12 years experience in health care, and at least 10 years of managed care experienced in one or more of the following areas: utilization management, care management, care transitions, behavioral health, long-term services and supports (LTSS), and progressive experience in clinical operations, or equivalent combination of relevant education and experience., • At least 7 years health care management/leadership experience., • Registered Nurse (RN), Licensed Vocational Nurse (LVN), Licensed Practical Nurse (LPN), Licensed Clinical Social Worker (LCSW), Licensed Marriage and Family Therapist (LMFT), Licensed Professional Clinical Counselor (LPCC), or Licensed Master of Social Work (LMSW). Clinical licensure and/or certification required ONLY if required by state contract, regulation, business operating model, or state board licensing mandates. If licensed, license must be active and unrestricted in state of practice. *Experience working within applicable state, federal, and third party regulations. *Operational and process improvement experience. *Strong interpersonal skills. *Strong leadership capabilities, and ability to initiate and maintain cross-team relationships and manage change. *Demonstrated experience meeting quality accreditation standards (National Committee for Quality Assurance (NCQA)/Healthcare Effectiveness Data Information Set (HEDIS)/Medicare STARS). • Excellent organizational and time-management skills., • Flexibility in the work environment and willingness and ability to adapt to changing organizational needs., • Excellent verbal and written communication skills., • Registered Nurse (RN). License must be active and unrestricted in state of practice., • Certified Case Manager (CCM), Certified Professional Healthcare Management (CPHM), Certified Professional in Healthcare Quality (CPHQ) or other health care or management certification., • Medicaid/Medicare population experience., • Clinical experience., • Familiarity and experience with local market/health plan. To all current Molina employees: If you are interested in applying for this position, please apply through the Internal Job Board. Molina Healthcare offers a competitive benefits and compensation package. Molina Healthcare is an Equal Opportunity Employer (EOE) M/F/D/V Pay Range: $161,914.25 - $315,733 / ANNUAL *Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. PDN-a1494d8f-1a57-4ce0-9e1f-f210b712cb54

Job Description Join Control Southern’s expert team and help keep critical industrial systems running safely and efficiently. Location: Jacksonville, Florida | Travel: Yes (overnight required) What You’ll Do • Inspect, repair, and maintain a variety of valves (control, safety, relief, gate, globe, check, ball, butterfly, plug) and actuators (pneumatic, hydraulic, electric)., • Perform calibration, testing, and troubleshooting of valves and process instrumentation., • Complete full repair cycle: pre-testing, disassembly, cleaning, machining, lapping, painting, assembly, and final inspection., • Document all repair activities, including cause of failure and parts used., • Provide technical support and communicate with customers on-site and in-shop., • Adhere to National Board VR/UV program guidelines and site-specific safety requirements., • Operate repair equipment such as overhead cranes, forklifts, sandblasters, and power tools. What We’re Looking For • Experience: 1–3 years in valve, pump, or actuator repair (or equivalent training). Welding and machining skills are a plus., • Skills: Strong mechanical aptitude, troubleshooting ability, time management, and teamwork., • Requirements:, • Valid driver’s license and insurability., • Ability to lift up to 44 lbs and work in varied conditions (heat, cold, clean rooms)., • Comfortable with off-hours, weekends, and overtime as needed., • Knowledge of rigging and moving heavy equipment. Why Join Us? • Be part of a safety-first culture with opportunities for growth., • Work on diverse projects at our repair facilities and customer sites., • Competitive pay and benefits. Ready to make an impact? Apply now and help us deliver reliability and safety to our customers. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Company DescriptionAt Control Southern, we believe that if you live with integrity, success will follow. Control Southern helps manufacturing plants in the Southeast run better, faster and smarter through automation and customized valve solutions. We offer on-site consultation, engineering services, top-notch products and business experience. To grow even more, we are seeking candidates with integrity, a drive to excel in engineering, a dedication to customer service and a thirst to innovative in management. Our expertise is backed by Emerson, a leader in global manufacturing and technology. With a team of highly skilled automation professionals developing unique solutions for our clients in power, pulp & paper, life science, chemical, food & beverage, alternative energy and many other process industries, we help the world run more efficiently. Across North America, Emerson strategically partners with local companies to assist with delivery, ensure quality, and maximize lifetime value of all automation assets. This integrated network of twenty-one strategically selected local companies, known as Emerson Impact Partners, offer the tools, services, subject matter experts, local expertise, and technologies within and beyond Emerson’s portfolio to serve valve, automation and reliability needs. As an Emerson Impact Partner for Georgia, Bahamas, the majority of Florida and Alabama, and portions of Tennessee, Control Southern connects customers with world-class solutions, superior technical expertise, and life-cycle services. Equal Opportunity Employer/Protected Veterans/Individuals with DisabilitiesAt Control Southern, we believe that if you live with integrity, success will follow.\r\n\r\nControl Southern helps manufacturing plants in the Southeast run better, faster and smarter through automation and customized valve solutions. We offer on-site consultation, engineering services, top-notch products and business experience.\r\n\r\nTo grow even more, we are seeking candidates with integrity, a drive to excel in engineering, a dedication to customer service and a thirst to innovative in management.\r\n\r\nOur expertise is backed by Emerson, a leader in global manufacturing and technology. With a team of highly skilled automation professionals developing unique solutions for our clients in power, pulp & paper, life science, chemical, food & beverage, alternative energy and many other process industries, we help the world run more efficiently.\r\n\r\nAcross North America, Emerson strategically partners with local companies to assist with delivery, ensure quality, and maximize lifetime value of all automation assets. This integrated network of twenty-one strategically selected local companies, known as Emerson Impact Partners, offer the tools, services, subject matter experts, local expertise, and technologies within and beyond Emerson’s portfolio to serve valve, automation and reliability needs.\r\n\r\nAs an Emerson Impact Partner for Georgia, Bahamas, the majority of Florida and Alabama, and portions of Tennessee, Control Southern connects customers with world-class solutions, superior technical expertise, and life-cycle services.\r\n\r\nEqual Opportunity Employer/Protected Veterans/Individuals with Disabilities

Job Description Machine Operator Location: Jacksonville, FL Pay: $24.50/hr Type: Contract to hire after 90 days Openings • 2 Day Shift: 6:00am to 6:30pm Training: • First 2 to 3 months on day shift, 6:00am to 6:30pm, 2x2x3, • Permanent Schedule After Hire: You will operate and maintain high-speed food manufacturing equipment in a production environment. This is a hands-on machine operator role, not forklift or mobile equipment operation. You are expected to be mechanically capable, comfortable troubleshooting issues, clearing jams, performing sanitation, and keeping production moving safely and efficiently. Previous experience running manufacturing production equipment is strongly preferred. Experience from similar industries is welcome if you are reliable, detail-oriented, and willing to work. Key Responsibilities • Operate ESL filling and down-line packaging equipment, • Clean, sanitize, and sterilize all tank lines and filling equipment per established procedures, • Perform sanitation duties according to the master sanitation schedule, • Verify and maintain correct chemical concentrations during cleaning, • Inspect equipment for leaks, jams, and mechanical issues, • Clear jams and make minor mechanical adjustments as needed, • Sanitize fillers during startup, changeovers, and as required, • Read and follow production sheets, specifications, and instructions, • Verify product location and instructions with processing team, • Discard initial product at startup and during product changeovers, • Perform weight checks at startup and every 30 minutes during runs, • Verify coding accuracy and product quality on a routine basis, • Conduct dye checks to prevent leaking cartons, • Minimize downtime during carton and product changeovers, • Maintain cleanliness and organization of machine surfaces and work areas, • Remove waste throughout the shift and at shift end, • Operate all down-line equipment as required, • Prior machine operation experience in manufacturing or production, • Mechanical aptitude and comfort working with industrial equipment, • Ability to troubleshoot, fix jams, and keep lines running, • Experience in food, beverage, packaging, or similar regulated environments preferred, • Strong work ethic and attention to detail, • Ability to work 12 hr shifts on a rotating 2x2x3 schedule, • Forklift-only operation, • Warehouse-only work, • Office or monitoring-only role

Ability to supervise, estimate, and manage complex engineering projects. We are seeking a highly skilled Senior Electrical Engineer to provide expert technical leadership and contribute to the delivery of industrial design projects across the chemical, power, utilities, and manufacturing sectors. Th

Bachelor's degree in a Chemical or Biological science, Clinical Laboratory Science, Medical Technology. Familiarity with laboratory information systems.

Ability to Manage Occupational Health Programs: Implementing, and evaluating key occupational health programs, such as Hearing Conservation, Respiratory Protection, Hazard Communication, or a Chemical Hygiene Program and evaluating new and existing jobs, processes, or other systems to determine the

The Flex Operator Trainee position at International Flavors & Fragrances (IFF) in Jacksonville, FL, is an entry-level role designed for individuals looking to start their career in chemical manufacturing.

Provides on-site technical service to HVAC mechanics and HVAC foreman. Serves as technical consultant and liaison with HVAC mechanic and HVAC foreman and technical counterparts. Skilled mechanical work, performed under general supervision, in the installation, inspection, operation, chemical treatme

Corrections Officer Recruit will automatically promote to Corrections Officer upon the successful completion of the Corrections Field Training Officer Program. Operates motor vehicles, electronic security and monitoring equipment, firearms, chemical agents, restraining devices, breath analyzer, and

Job DescriptionOverview Join Diversified Maintenance! We're committed to delivering exceptional cleaning, landscaping, and restoration services for commercial facilities. Be part of a welcoming and collaborative team where innovation meets excellence. We offer steady, reliable work in janitorial management, full-time and part-time janitorial roles, maintenance, landscaping, and metal restoration. If you want to make a meaningful impact and build a lasting career, we have opportunities for you. Join us and grow with a leader in the industry! Job Description Part Time • $14.00 per hour, • Morning and Afternoon, • Monday through Friday, • 5:00 AM to 10:00 AM RESPONSIBILITIES: • Maintain and clean all floor surfaces, including sweeping, mopping, scrubbing, or vacuuming, • Follow procedures for the use of chemical cleaners and power equipment, in order to prevent damage to floors and other objects, • Clean, monitor and maintain restrooms, meeting rooms, corridors, and entrance areas, • Empty trash cans for proper disposal; use of compactor for certain materials, • Clean windows, glass partitions, and mirrors using appropriate cleaners and equipment, • Spot clean carpets; assist in carpet extractions and shampooing, • Replenish paper products and sanitary supplies, • Follow housekeeping schedule, • Occasionally use heavy cleaning equipment, such as floor scrubbers, backpack vacuums, and buffers, • High school diploma or equivalent, or a minimum of six (6) months of experience in a janitorial type position, • On the job training will be provided, • Attention to detail, • Prior cleaning or janitorial experience, • Familiarity with custodial practices and commercial cleaning standards, • Knowledge of floor care techniques including buffing and waxing If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. Requisition ID 2026-1546742

Job Description • We are hiring immediately for a XXX position., • Location: Note: online applications accepted only., • Schedule:, • Requirement:, • Pay Range: [[cust_StartingPayRate]] per hour to [[cust_MaxPayRate]] per hour. Join Intelas, a Compass Healthcare company. At Intelas, we blend expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make informed capital decisions. We hold ourselves accountable to do the right thing, focus on excellence in every detail, and work as one team to give clinicians the confidence to focus fully on care. With more than 1.15 million medical devices managed across 4,500 healthcare sites, we provide clarity and consistency in a fast-changing environment. Here, you’ll join a culture that puts people first, creates belonging, and builds lasting relationships while helping each other achieve more together. Whether you’re just starting out or are a seasoned professional, we believe there is no limit to your potential—and we’ll empower you to grow alongside teammates who share your passion for service and responsibility. Job Summary Summary: Crothall Healthcare provides an advanced level of quality maintenance, service and support for multi-modality, multi-vendor diagnostic imaging (DI) equipment. Job Description: This role is responsible for the leadership, support and development of the DI service team, to ensure expert service of imaging equipment and customer satisfaction. The NSE role is also the last line of defense before service is outsourced to a third-party. Primary Duties: • Responsible for technical support for customer accounts, equipment assets and/or modalities as assigned. This includes the development of programs and procedures, training, mentoring, technical support, monitoring escalations, cost productivity, and driving self-service capability., • Provide technical support via phone, written (email or other) and on- site, as needed., • Demonstrate advanced troubleshooting capability for multi-modality, multi-OEM’s., • Proven track record of solving difficult problems, • Demonstrated ability to handle difficult customer situations, • Perform/facilitate DI assessments at new account start-up or when needed., • Supports QA/RA to ensure compliance with company, ISO, and governmental policies. Contribute/write policies as needed. General Duties: • Perform daily duties in accordance with the Crothall Healthcare Policy and Procedure Manual., • Ability to carry or pull up to 40 lbs of equipment and tools., • Frequent bending, stooping, twisting and turning required using full body mobility., • Adhere to prescribed PPE (Personal Protective Equipment) requirements to protect against physical, biological and chemical hazards., • Perform other related duties as required., • Possess a valid driver’s license and maintain a good driving record., • Available for after hours and weekend support as needed., • Travel up to 80% of the time to customer sites, meetings, and training as required. Skills/Qualifications: • Bachelor’s or Associate’s Degree in Electronics/Biomedical Technology or equivalent., • Must be competent with a minimum of 5 years of experience servicing and maintaining advanced multi-vendor/multi-modality DI equipment., • Operate under required knowledge of regulatory requirements., • Strong time management ability, • Able to collaborate and cooperate in a team environment to achieve assigned goals and objectives, take direction and proactively complete assignments., • Ability to work independently with minimal supervision., • Ability to prioritize, organize and handle multiple projects and activities simultaneously. BENEFITS FOR OUR TEAM MEMBERS • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program, • Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Intelas maintains a drug-free workplace.

Also, must have a minimum of two (2) years experience in health care business development, healthcare marketing and sales, contract management environment with measurable business development results, pharmaceutical/medical sales, and a basic knowledge of psychiatric and chemical dependency treatmen

Job Description Come and be a part of a GREAT company! Stellar Energy provides excellent benefits and programs such as: • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off., • 10-Paid holidays a year., • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Baileys Gym Membership, • Tuition Assistance, • 2nd Shift Differential – 10% Mechanical Foreman Position Type:Full-time, Non-Exempt, Hourly Reports to:General Superintendent/Fabrication Manager Supervisory Responsibility:None Location:Jacksonville, FL Company Summary Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma and other markets. Stellar Energy’s innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company’s experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Summary Objective Coordinate all mechanical aspects of building modules with the proper fitting/assembly of all piping systems to insure the successful final Hydro Test and Chemical Injection as needed. Then follow up with outfitting of all small bore and instrumentation such as relief drains and tubing. Assign teams that are qualified to follow through. Working with the superintendent to assure completion dates and time lines are met with a minimum of rework and man hours. Work closely with every team at all times. Essential Functions -Identify teams for crew structure -Verify training level of crew members and seek training/qualifications as needed -Work hand in hand with superintendent to achieve company goals with projects -Monitor all tasks assigned and help verify critical layout and cuts to fit as needed in order to halt re-work -Enforce company procedures on standard operating procedures, building and assembly procedures, Hydro and chemical injection and most of all “safety procedures” -Seek to improve all operations to reduce man hours and improve safety -Serve as lead on all projects to direct teams -Work with the Engineering Department -Make sure that all equipment used for projects is in proper working order, safe and available when needed and control the maintenance of this equipment -Meet the company needs as well as the customer needs -Ensure proper stock of Kanban is sufficient on all shadow boards and control the proper use thereof -Participate on daily turnover from 1st to 2nd shifts with detailed information both verbal and written -Monitor all materials use for individual projects to be sure it is correct -Use disciplinary actions as needed to improve or to correct things/individuals as required -Monitor and maintain entire Fab Shop with all activities such as garbage, laydown areas, building maintenance and safety using hourly walk throughs. -Checking to be sure all tools and equipment have proper certifications and Calibrations and working with QAQC and superintendent. -For all projects “loose ship” needs to be a primary issue and you will need to work with shipping and receiving department and superintendent on this vital project to assure accuracy in a timely manner. -Verify all tags, logbooks, shipping drains, flow arrows FME and instrumentation are complete. -Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Competencies -Team Builder / Leadership Attributes -Reliable Attendance -Strong Decision-Making Ability -Excellent Communication Proficiency - Written and Verbal -Ethical Conduct -Problem Solving -Exceptional Organizational Skills -Attention to Detail - Thoroughness -Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 3:00 pm to 1:30 am. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience High school diploma or GED 15+ Years’ experience in ‘Shipyard Mechanical’ trade with 5+ Years’ as qualifying Forman Position title 3+ Years’ experience in Welding SMAW, FCAW, GMAW and GTAW, or a combination thereof Preferred Education and Experience -Bachelor Degree -2+ years vocational technical training • Intermediate proficiency in Microsoft Excel, Word, Power Point, Outlook Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, du-ties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. ________________________________________ Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description • We are hiring immediately for a XXX position., • Location: Note: online applications accepted only., • Schedule:, • Requirement:, • Pay Range: [[cust_StartingPayRate]] per hour to [[cust_MaxPayRate]] per hour. Join Intelas, a Compass Healthcare company. At Intelas, we blend expert service teams with intelligent, data-driven strategies that help hospitals improve uptime, simplify oversight, and make informed capital decisions. We hold ourselves accountable to do the right thing, focus on excellence in every detail, and work as one team to give clinicians the confidence to focus fully on care. With more than 1.15 million medical devices managed across 4,500 healthcare sites, we provide clarity and consistency in a fast-changing environment. Here, you’ll join a culture that puts people first, creates belonging, and builds lasting relationships while helping each other achieve more together. Whether you’re just starting out or are a seasoned professional, we believe there is no limit to your potential—and we’ll empower you to grow alongside teammates who share your passion for service and responsibility. Job Summary Summary: Crothall Healthcare provides an advanced level of quality maintenance, service and support for multi-modality, multi-vendor diagnostic imaging (DI) equipment. Job Description: This role is responsible for the leadership, support and development of the DI service team, to ensure expert service of imaging equipment and customer satisfaction. The NSE role is also the last line of defense before service is outsourced to a third-party. Primary Duties: • Responsible for technical support for customer accounts, equipment assets and/or modalities as assigned. This includes the development of programs and procedures, training, mentoring, technical support, monitoring escalations, cost productivity, and driving self-service capability., • Provide technical support via phone, written (email or other) and on- site, as needed., • Demonstrate advanced troubleshooting capability for multi-modality, multi-OEM’s., • Proven track record of solving difficult problems, • Demonstrated ability to handle difficult customer situations, • Perform/facilitate DI assessments at new account start-up or when needed., • Supports QA/RA to ensure compliance with company, ISO, and governmental policies. Contribute/write policies as needed. General Duties: • Perform daily duties in accordance with the Crothall Healthcare Policy and Procedure Manual., • Ability to carry or pull up to 40 lbs of equipment and tools., • Frequent bending, stooping, twisting and turning required using full body mobility., • Adhere to prescribed PPE (Personal Protective Equipment) requirements to protect against physical, biological and chemical hazards., • Perform other related duties as required., • Possess a valid driver’s license and maintain a good driving record., • Available for after hours and weekend support as needed., • Travel up to 80% of the time to customer sites, meetings, and training as required. Skills/Qualifications: • Bachelor’s or Associate’s Degree in Electronics/Biomedical Technology or equivalent., • Must be competent with a minimum of 5 years of experience servicing and maintaining advanced multi-vendor/multi-modality DI equipment., • Operate under required knowledge of regulatory requirements., • Strong time management ability, • Able to collaborate and cooperate in a team environment to achieve assigned goals and objectives, take direction and proactively complete assignments., • Ability to work independently with minimal supervision., • Ability to prioritize, organize and handle multiple projects and activities simultaneously. BENEFITS FOR OUR TEAM MEMBERS • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program, • Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis Application Deadline: applications are accepted ongoing until all openings are filled for this position. If an applicant is declined due to the position being filled, they may still be considered for future opportunities and are always welcome to reapply. Intelas maintains a drug-free workplace.

Job Description POSITION: Dish Machine Operator or Dishwasher FLSA STATUS: Non-Exempt SUPERVISOR: MOD REPORTS: None POSITION SUMMARY: The dishwasher’s primary responsibility is to provide clean and sanitary china, glass and silver for the guests and clean and sanitary cooking vessels and utensils for the preparation of served items. In addition, the position will complete assigned cleaning chores, break down boxes for recycling, neatly dispose of trash and recycling materials and keep kitchen storage areas clean and organized. RESPONSIBILITIES (PRIMARY) * This position may set up or breakdown and clean the dish machine * Set up and maintain soak stations for soiled silverware, pre-process plates and other serving utensils, sort and spray glass racks and properly load and balance dishwasher load trays. * After cleaning, all items are to be organized and stored properly for use. * All area surfaces should be kept clean and as far as possible, dry. * Pot sinks must be set up and maintained with correct chemical cleaning balances and kept according to established sanitary procedures. * All trash and soiled linen areas are to be kept clean and emptied or stored when appropriate. Container boxes should be broken down and removed from work areas and floors are to be kept swept, clear and dry. RESPONSIBILITIES (POS COMPUTER SYSTEM) POS payroll procedures RESPONSIBILITIES (OTHER) DMO’s may be trained in tasks for food preparation and if so, trained will have to: * Comprehend and read recipes * Observe all safety and sanitation procedures * Operate machinery safely and correctly. RESPONSIBILITIES (ALL EMPLOYEES) * All employees are expected to be part of the Total Service experience and look for ways to provide service to guests and as needed, to each other. * Provide first-class guest service at all times. * Adhere to all restaurant policies and procedures. QUALIFICATIONS * Excellent written and verbal communication skills. * Excellent guest service skills, energetic, enthusiastic and motivational. * Ability to multitask, grace under pressure, the ability to establish a positive rapport with many types of personalities and self-directed task order. * Position requires ability to comprehend written and spoken direction. * Detail oriented with an interest in maintenance of restaurant physical assets, including the correct usage of cleaning chemicals. * Position requires a team player, and an ability to work well with others in Front and Back of the House positions. EQUIPMENT TO BE USED * Dish machine * Hoses * Chemical dispensers * Mop buckets and brooms * Food slicers * Knives * Can openers * Mixers and processors * POS time reporting procedures PHYSICAL AND ENVIRONMENTAL REQUIREMENTS: * Occasional bending, kneeling, and lifting up to 50 lbs. * Frequent standing and walking. * Noise level may be moderate to high at times. * Be able to work in a standing position for extended periods of time. Note: This job description is intended only as a general guideline of your duties and responsibilities at the Restaurant and is not a legally binding contract. Clean Plate reserves the right to amend, change or terminate the job description, as it deems appropriate. Any change amendments, or modifications may be implemented even though they have not been communicated, reprinted or substituted in this job description.

Job Description Employment Type: Full-time Location: Jacksonville, FL Division/Department: MRO/Furnishings Available vacancies: One About Avmax: Avmax is a diverse company offering every product and service related to aviation. We have locations, operations, and deployment worldwide. Our vision at Avmax Group Inc. ("Avmax") is to simplify our customers' aviation needs through dependable, globally integrated services with trusted results. Established in 1976, our locations include: Calgary (HQ) and Vancouver in Canada, Great Falls and Jacksonville in the USA, Nairobi in Kenya, and N'Djamena in Chad. Avmax offers the following capabilities: Aircraft Leasing, Airline Operations, Avionics, Component Repairs, Engineering, MRO, Paint and Spares. Avmax's engineering division is a Transport Canada authorized Design Approval Organization (DAO). Avmax's maintenance division is a Transport Canada authorized Maintenance Repair Organization (MRO). Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting Structure The position reports directly to the Department Lead. Core Competencies • Accountability, • Attention to detail, • Problem-solving, • Effective communication, both verbal and written, • Confidentiality, • Excellent investigation and critical-thinking ability, • Judgement, • Professionalism, • Safely perform painting and detailing of aircraft under minimal supervision., • Knowledge of sanding parts and components., • Properly clean parts and components prior to painting., • Aware of how to mask parts and components prior to application of coating., • Working knowledge of strippers and their use., • Excellent attention to etching metal and applying chemical conversion coatings., • Repair and complete modifications on aircraft., • Working knowledge of lifts, power buffers, arc welders, and spray guns., • Properly dispose of hazardous waste and following color charts., • Responsible to report unserviceable equipment to lead/manager., • Demonstration of safe working practices and techniques., • Responsible to wear appropriate Personal Protective Equipment (PPE's) as required and pass a respirator fit test physical., • Demonstrated ability to work well with others., • Work well with little supervision and pay close attention to details., • Excellent verbal and written communication skills., • Proven ability to work alone and in a team environment., • Minimum 2 years' experience in related field with strong mechanical and/or mechanical, • HR & IT Orientation (instructor-led), • Safety Orientation (instructor-led), • Occupational Health and Safety, • Safety Management System (SMS), • General Procedures Manual (GPM), • Maintenance Policy Manual (MPM), • Human Factors, • Respect in the Workplace Training, • Workplace Violence and Harassment Training, • Workplace Sensitivity Training, • A Guide to Workplace Incident Investigations, • Duty of Persons Directing Work (Bill C-45), • Management Development Program (instructor-led), • Occupational Health and Safety Awareness Training for Supervisors in All Jurisdictions, • Progressive Discipline, • Supervisor 101 - Avmax Internal Training (instructor-led) NOTE: Most training modules will be assigned as part of the onboarding program and must be completed within the first 3 months of employment. Please refer to your onboarding schedule for further details. Safety Training for Safety Committee Members - (Only Applicable to employees who will be part of the Safety Committee) • A Guide to Workplace Incident Investigations Elective programs and/or courses should meet at least one of the following criteria: • Alignment with core competencies / KPI's, as outlined in the current position profile;, • Development of one's skillset for career progression., • Elective courses can be aligned with a performance development plan. To find out more information please contact your Human Resources Department. All elective programs and/or courses are subject to prior approval by the authorizing Manager. Our recruitment commitments: • We thank all applicants for their interest; however, only those selected for an interview will be contacted., • Depending on qualifications, selected candidates may be offered a role at a more appropriate level., • Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan., • Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups., • Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening. Job Posted by ApplicantPro

Job Description • We are hiring immediately for a full time DISHWASHER position., • Location: BGCNF - 313 East 10th Street, Jacksonville, FL 32206. Note: online applications accepted only., • Schedule: Full time schedule. Monday - Friday, 6:30 am - 3:00 pm. Further details upon interview., • Requirement: Previous dishwashing and/or utility experience preferred. Willing to train! Bilingual english and spanish is a plus!, • Perks: No nights or weekends! We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1502806. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Chartwells K12's goal is to make sure students leave the cafeteria happier and healthier than they came in, by serving food kids love to eat and creating custom dining programs. With more than 16,000 associates in 4,300 schools, ranging from large public institutions to small charter and private schools, Chartwells K12 is built on decades of food, education and operational experience driven by top culinary, nutrition, wellness, and sustainability talent. For more information, visit . Job Summary Summary: Maintains dishes, pots, pans, trays, kitchen, work areas, equipment and utensils in orderly and sanitary condition. Essential Duties and Responsibilities: • Scrapes and rinses food from dirty dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Washes pots, pans and trays based on assigned procedures. Ensure complete cleanliness and sanitation., • Polishes silver using burnishing machine tumbler, chemical dip, buffing wheel and hand cloth depending on assigned equipment and procedures. Ensures complete cleanliness and sanitation., • Ensures compliance with outlined safety procedures., • Maintains temperatures and chemical levels as outlined by provided standards., • Keeps dish area orderly and in compliance with safety standards., • Sweeps and mops kitchen floors to ensure compliance with safety and sanitation standards., • Washes worktables, walls, refrigerators, meat blocks and other food prep surfaces., • Removes trash and places it in designated containers. Steam cleans or hoses out garbage cans., • Transfers supplies and equipment between storage and work areas., • Helps load and unload supplies and product. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Chartwells K-12 maintains a drug-free workplace.

Job Description Job Title: Safety & Security Coordinator Industry: Marine Terminals Operation, Auto Logistics, Manufacturing & Assembly, Warehousing, Stevedoring, Cargo Handling. Location: Jacksonville, FL Reporting Relationship: The Safety Director/Facility Security Officer. About the Position: The Safety/Security Coordinator supports and promotes a culture of safety across port terminal and warehouse operations. This role ensures compliance with OSHA, U.S. Coast Guard, Maritime Safety Regulations, U.S. Customs, EPA, and Florida-specific safety laws. Responsibilities include, Key responsibilities include conducting inspections, facilitating training, supporting Facility Security Plan (FSP) requirements, investigating incidents, maintaining regulatory records, and ensuring employees, contractors, and visitors comply with all safety and security procedures. The position requires full-time commitment to operational safety and security objectives and may involve travel between terminals and attendance at industry-related training or conferences. Expectation is that you will devote your full business time, attention, and best efforts to the performance of your duties and the company’s interests. Some travel between other maritime terminals located in Jacksonville and/or conferences will be required. Key Responsibilities • Safety & Security Program Compliance & Implementation, • Enforce compliance with:, • Applicable OSHA standards, • OSHA 29 CFR 1910 (General Industry), • OSHA 29 CFR 1917 (Marine Terminals), • OSHA 29 CFR 1918 (Longshoring), • USCG Regulations (33 CFR Parts 105 and 126), • EPA, Florida DPA, and Florida DOT requirements, • Applicable U.S. Customs and Border Protection (CBP) requirements related to cargo handling, CTPAT participation, and secure movements of import/export cargoes., • Assist the FSO with implementing and maintaining the approved Facility Security Plan (FSP), including:, • Access Control and TWIC verification, • Escorting procedures, • Restricted and secure area enforcement, • Cargo and conveyance security, • Security training. Page Break • Coordinate with USCG, CBP, and other federal, state, and local agencies as needed regarding facility inspections, drills, exercises, and security events., • Develop, implement, and maintain site-specific safety and security procedures for:, • Vessel loading and unloading, • Stevedoring and cargo handling, • Heavy equipment, • Auto processing and assembly operations, • Warehouse storage and material handling, • Railcar loading and unloading, • Support compliance related to environmental protection, stormwater management, hazardous materials, and spill prevention., • Maintain awareness of Florida-specific environmental hazards (e.g., heat stress, hurricanes, severe weather) and assist in updating Emergency Action Plans accordingly., • Coordinate and participate in safety meetings, toolbox talks, safety stand-downs, drills, and exercises., • Training & Safety Education, • Conduct new-hire safety/security orientations, emphasizing port and warehouse hazards., • Facilitate regular toolbox talks, safety stand-downs, and emergency drills., • Provide specialized training for PPE usage, hazard communication (HazCom), confined space, • Conduct new-hire safety and security orientations with emphasis on port terminal, auto logistics, and warehouse hazards., • Facilitate routine toolbox talks, safety stand-downs, and emergency response drills., • Deliver or coordinate training in:, • Personal Protective Equipment (PPE), • Hazard Communication (HazCom), • Lockout/Tagout (LOTO), • Confined Space Entry, • Powered Industrial Trucks (PIT), • Fall Protection, • Heat Stress Prevention, • Respiratory Protection, • Vessel Familiarization, • Security Awareness and Procedures., • Other regulatory or company-required training courses. ., • Track training certifications in the company’s EHS database, EHS Insight. 3. Inspections & Hazard Control • Perform and document daily, weekly, monthly, and/or annual inspections of:, • Marine Terminal and docks, • Vessels, • Warehouses and auto processing yards, • Manufacturing and assembly areas, • Cargo storage and staging areas, • Identify, document and assist with correction of hazards, including:, • Slips, trips and fall risks, • Improper cargo securing, • Equipment defects, • Chemical storage violations, • Environmental spill risks, • Security compliance gaps, • Inspect and assist in maintaining safety and security equipment such as:, • Fire Extinguishers, • Emergency eyewash and showers, • AEDs and first aid kits, • Spill response equipment, • Radio and security systems, • Participate in internal and external audits, including those from USCG, CBP, OSHA, EPA, insurance, and corporate safety. 4. Incident Response & Investigation • Respond to and assist in workplace accidents, injuries, near-misses, hazardous material spills, and security incidents in compliance with OSHA and USCG reporting requirements. Document and preserve evidence from incident scenes., • Ensure proper notification and reporting to internal and external parties., • Lead/assist incident investigations using 5 whys; identify root causes and corrective/preventive actions CAPAs., • Maintain accurate and timely injury/illness logs per OSHA 300/301 requirements, and Florida and US Longshore and Harbor Workers, Workers’ Compensation laws. 5. Reporting & Recordkeeping • Prepare and distribute safety/security performance reports for management and regulatory agencies as required., • Support facility security as an assistant FSO in implementing required USCG security regulations., • Maintain organized and accurate documentation for:, • Support audit preparation and regulatory inspections conducted by OSHA, USCG, CBP, other regulatory agencies, and insurance inspections., • Other duties as assigned 6. Qualifications and Expectations (Required/Preferred) Required • Ability to maintain a Transportation Worker Identification Credential (TWIC). Preferred • OSHA 30-hour Maritime or General Industry certification., • First Aid/CPR/AED certification., • Facility Security Officer certification or alternate FSO training requirements., • CTPAT/FTZ understanding. Experience: • 2 or more years of prior experience in one or more of the following environments (preferred), • Marine Terminals, • Stevedoring, • Warehousing, • Auto processing or manufacturing, • Rail or intermodal operations, • Prior experience in safety, security, environmental, or regulatory compliance roles. Skills & Competencies: • Strong knowledge of OSHA maritime, general industry, and warehouse safety standards,, • Familiar with USCG, CBP, and Florida state regulatory requirements., • Ability to interpret and apply company policies, FSP requirements, and regulatory standards in day-to-day operations., • Effective verbal and written communication skills to interact with diverse workgroups., • Comfortable in delivering training materials and speaking in front of small and large groups., • Proficient in Microsoft Office Suite and EHS/safety tracking and reporting software., • Strong observation skills and ability to recognize hazards quickly and implement corrective actions., • Organized, detail-oriented, and able to manage multiple tasks in a fast-paced, 24/7 port environment. Work Schedule & Availability: • Ability to work varying schedules, including nights, weekends, and holidays to support vessel/warehouse/terminal operations, special projects, and incidents., • Availability for on-call support during emergencies, severe weather events, and/or security incidents., • Participation in periodic training, drills, exercises, and committee meetings. Physical Demands/Work Environment: • Ability to wear and maintain required PPE: Safety-toe boots/shoes, hi-visibility safety clothing, gloves, hardhat, respiratory protection, hearing protection, etc., • Ability to regularly stand, walk long distances, climb stairs/ladders, and work on uneven/slippery surfaces on the terminal and vessels., • Ability to frequently use hands and arms to handle materials, operate radios, grab, handle, feel, and reach., • Ability to occasionally sit and stoop, kneel, crouch, climb, or crawl for inspecting equipment, cargo, or structures., • Ability to lift and move up to 50 pounds, occasionally., • Vision abilities, whether natural or corrective, include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management. Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia’s Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description A Senior Wastewater Operations Traveling Technician(SWOT) will be trained to operate and maintain wastewater plants at several locations around the country. The purpose of the position is to assist with new account startups, temporary operations, and to cover our existing facilities while local operators are out on PTO/sick time. The SWOT will be responsible for the overall operation and maintenance of the wastewater plants they visit, including process changes to meet compliance, troubleshooting processes & equipment, operational management, maintenance (routine, reactive, and preventive), process & compliance sampling, laboratory testing, and writing and distributing a daily shift report. In addition, the Senior Wastewater Operations Traveling Technicians will assist with the startup of new wastewater operating contracts until full-time local operators are hired The SWOT will be responsible for training the newly hired operator(s). The SWOT will communicate with the client and with Veolia’s Account Manager regarding the operation during their time at the facility. The SWOT will be required to travel and be away from home for extended periods of time - this can range from 1-2 weeks at a time, all the way up to 1 or more months for certain projects. Essential Duties and Responsibilities: • Operate and maintain wastewater plants to comply with the requirements of the, • discharge permit, and each clients’ expectations/requirements., • Provide direction and support (as needed) to the operators on the other shifts, including, • the delegation of tasks based on the skills and abilities of the other operators., • Conduct lab analysis of the waste streams at various points in the process to verify, • treatment and to make process changes., • Communicate frequently with the Account Manager regarding the operation of the, • WWTP and request assistance as needed for the site., • Coordinate your own travel plans to and from the assigned facility. Note: Veolia pays, • for all expenses associated with work-related travel (meals, lodging, transportation, etc.), • Write or revise Standard Operating Procedures, as necessary., • Analyze lab data to uncover potential treatment issues and then implement process, • changes to prevent non-compliance., • Submit daily and/or weekly reports to client and Veolia management regarding the, • current status of the wastewater plant operations and needs of the operations team., • Flexibility in schedule is very important. Most travel will be planned in advance, but, • there are occasions when emergencies arise. SWOT members will need to be willing, • to travel on short notice. Although these times are infrequent, it is a possibility., • Manage the chemical inventories, spare parts inventory, and waste disposal activities., • Provide training and/or facilitate training of operators for all facets of the operation /, • management of the WWTP., • Perform all duties/tasks in compliance with the site safety plan to ensure the safety of, • all on-site personnel., • Coordinate and assist with major maintenance and preventive maintenance activities., • Complete minor reactive and preventative maintenance activities to ensure smooth, • process operations at all times., • Optimize the operation of the wastewater treatment plant.Qualifications Education and Experience Requirements: • A wastewater license (biological and/or physical chemical) required, • Willing to pursue reciprocity in other states as well as higher levels in wastewater, • treatment., • 6+ years experience in wastewater treatment with knowledge of biological and/or, • physical/chemical treatment systems. (college included), • Operational experience with several types of WWTP systems preferred., • Examples: clarification, coagulation, flocculation, sludge dewatering, metals, • precipitation, aerobic, anaerobic, chemical feed, and lab procedures., • Strong mechanical ability and aptitude required., • Good communication skills, both verbally and in written form., • Ability and desire to build a “team mentality”., • Effective report writing skills., • Proficient in writing documents and creating/updating spreadsheets in either Microsoft EOE/AA-M/F/Disability/Veteran Additional Information All your information will be kept confidential according to EEO guidelines. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

Job Description Stellar is seeking a Process Project Engineer to be responsible for supporting and managing a diverse engineering and design project team, and to serve both an internal and external customer base from a project’s inception to its completion. You will research, define, test, and implements processes and develop P&ID’s, Process Flow Diagrams, Utility drawings, project specifications, and equipment layouts for food-processing facilities. You'll be responsible for properly sizing, specifying, and integrating process equipment, as well as coordinating structural, mechanical, electrical and control systems, as required. Knowledge of food-processing, packaging, material handling, and other process equipment/systems in compliance with state, federal and/or International codes & standards is required. Knowledge of RTE, bakery, coffee, protein, or dairy/beverage processes preferred. • Design – responsible for the Process-related engineering aspects of a project. Works with Project Managers, Engineers, and Designers to develop Process Flow Diagrams, P&ID’s, and equipment layouts (General Arrangements) to efficiently meet customer specifications; ensures designs and layouts conform to specifications, code requirements, and food-safety requirements, • Provides direction to engineers, designers and CAD operators for the creation of engineering drawings, • Develops design specifications for external suppliers including OEM’s and Sub-Contractors, • Provides attentiveness to detail, follow-up procedures, and documentation of action; proficient in time-management and personal organization, • Generates and manages various forms of communication, including RFI’s and submittals, throughout the life-cycle of a project, • Communicates directly with equipment vendors to obtain all necessary designs, drawings, and utility information. Utilizes collected data to design equipment Utility drawings, • Prepares contract documents, calculations, observation reports, and estimates, • Procurement – aids in the bidding of equipment and services by generating the appropriate bid documents, managing the bidding schedule, and conducting a bid analysis, • Budget Control – assists by estimating layout costs (design and material) for specified process; seeks alternative methods that reduce cost of design; reviews activities to ensure design stays within projected costs, • Client Interface – effectively responds to the needs and requests of clients, as required, • Project Administration – utilizes company software/tools to ensure all necessary documents are in-place and processed; reviews and approves Engineering Change Notices; develops and implements design project schedules; schedules meetings as necessary with suppliers, owners, design teams, and permitting agencies; plans work schedules and timelines for support staff, • External Relationships – coordinates with outside engineering and architectural resources on all aspects of design; communicates with permitting and regulatory agencies, as necessary, • Provides onsite and/or offsite direction and support to Field Engineers and Superintendents throughout the equipment installation, startup, and commissioning phases of a project, • Assists in updating all record data and drawings for final project completion and turnover Qualifications • BS Degree in Engineering (Mechanical or Chemical preferred), • Minimum of 4 years of professional experience (Food and Beverage preferred), • Familiarity with Food Safety Designs and Guidelines, • Technical Writing Skills, • Skilled in relevant software; Procore, MS Office Suite, BlueBeam, Adobe, MS Project or Primavera P6, Power BI, AutoCAD and BIM / ACC, • Travel required to customer locations, OEM locations, and construction site locations About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description POSITION: Dish Machine Operator or Dishwasher FLSA STATUS: Non-Exempt SUPERVISOR: MOD REPORTS: None POSITION SUMMARY: The dishwasher’s primary responsibility is to provide clean and sanitary china, glass and silver for the guests and clean and sanitary cooking vessels and utensils for the preparation of served items. In addition, the position will complete assigned cleaning chores, break down boxes for recycling, neatly dispose of trash and recycling materials and keep kitchen storage areas clean and organized. RESPONSIBILITIES (PRIMARY) * This position may set up or breakdown and clean the dish machine * Set up and maintain soak stations for soiled silverware, pre-process plates and other serving utensils, sort and spray glass racks and properly load and balance dishwasher load trays. * After cleaning, all items are to be organized and stored properly for use. * All area surfaces should be kept clean and as far as possible, dry. * Pot sinks must be set up and maintained with correct chemical cleaning balances and kept according to established sanitary procedures. * All trash and soiled linen areas are to be kept clean and emptied or stored when appropriate. Container boxes should be broken down and removed from work areas and floors are to be kept swept, clear and dry. RESPONSIBILITIES (POS COMPUTER SYSTEM) POS payroll procedures RESPONSIBILITIES (OTHER) DMO’s may be trained in tasks for food preparation and if so, trained will have to: * Comprehend and read recipes * Observe all safety and sanitation procedures * Operate machinery safely and correctly. RESPONSIBILITIES (ALL EMPLOYEES) * All employees are expected to be part of the Total Service experience and look for ways to provide service to guests and as needed, to each other. * Provide first-class guest service at all times. * Adhere to all restaurant policies and procedures. QUALIFICATIONS * Excellent written and verbal communication skills. * Excellent guest service skills, energetic, enthusiastic and motivational. * Ability to multitask, grace under pressure, the ability to establish a positive rapport with many types of personalities and self-directed task order. * Position requires ability to comprehend written and spoken direction. * Detail oriented with an interest in maintenance of restaurant physical assets, including the correct usage of cleaning chemicals. * Position requires a team player, and an ability to work well with others in Front and Back of the House positions. EQUIPMENT TO BE USED * Dish machine * Hoses * Chemical dispensers * Mop buckets and brooms * Food slicers * Knives * Can openers * Mixers and processors * POS time reporting procedures PHYSICAL AND ENVIRONMENTAL REQUIREMENTS: * Occasional bending, kneeling, and lifting up to 50 lbs. * Frequent standing and walking. * Noise level may be moderate to high at times. * Be able to work in a standing position for extended periods of time. Note: This job description is intended only as a general guideline of your duties and responsibilities at the Restaurant and is not a legally binding contract. Clean Plate reserves the right to amend, change or terminate the job description, as it deems appropriate. Any change amendments, or modifications may be implemented even though they have not been communicated, reprinted or substituted in this job description.

Job Description The Process Engineer is responsible for leading the design and implementation of solutions that meet the needs of our diverse food and beverage manufacturing operations. This role requires a deep understanding of food processing technologies, the design and delivery of production systems for food and beverage manufacturing facilities, with an emphasis on raw material storage, processing, thermal processing, mixing & blending, filling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. The Process Engineer will work closely with cross-functional teams, including product development, marketing, engineering, architects, manufacturing, project management, and field staff to ensure that all process solutions are innovative, functional, and fully developed to include all requirements for successful operation. Duties/Responsibilities: • Design processes to achieve project goals, • Define processing steps required to make food or beverage products, handle waste or byproducts, and cleaning systems., • Calculate equipment rates, create optimal food plant layouts, and prepare block and/or process flow diagrams to ensure all flows are understood and included in the design., • Engineer process equipment & systems, • Perform process calculations, size and select equipment & components; ensure designs comply with relevant codes, standards, & sanitary practices., • Develop P&ID’s, equipment specifications, installation specifications, equipment lists, controls narratives for coordination, and coordinate 3D modeling with design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the process into plant infrastructure., • Support procurement of equipment & installation packages, • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Support installation of process equipment, • Review installation submittals and participate in subcontractor coordination meetings., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Startup & commissioning of process equipment, • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Assist in process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations., • Other duties as assigned.Required Skills/Abilities:, • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor of Science Engineering degree in Chemical, Manufacturing, Mechanical, or a related field., • Advanced degrees or certifications in continuous improvement methodologies are advantageous., • Minimum of 1-7 years of experience in food or beverage manufacturing systems. Relevant professional certifications are a plus., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of Ingredients and their reactions to heating, cooling, mixing, blending, pumping., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Skilled in relevant software; Microsoft Office Software, AutoCAD, Inventor, Revit, Procore, Bluebeam, Adobe, Power BI, and ACC is preferred., • Experience with process design and engineering in a design-build or EPC setting., • Exposure to sustainability-focused initiatives such as water reuse, energy recovery, or nutrient capture is a plus.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Mayport Galley- 6:00 am- 2:30 pm Job Title: Food Service Attendant Department: Ability One Reporting to: Project Manager Date: 09/10/24 Position Status: Updated FLSA Status: Non-exempt Job Summary: Performs a variety of tasks in a busy military dining facility. May be assigned to different areas of the operation including dining area, salad bar, scullery, pot wash and restrooms, etc. Minimum Qualifications: Education Must be able to read, write, understand, and speak English sufficiently to perform job. Experience Previous kitchen experience in large volume, institutional feeding is preferred.. Licensure, Certification, and/or Registration None Other • Must possess excellent customer service skills, • Must work well within a team., • Adhere to departmental policies and procedures. Essential Duties % of Time DINING AREA: • Table condiments -clean and refill, • Clean napkin holder, salt and pepper shakers, • Table tops, booths, and chairs cleaned using the two-pan method, • Vacuum carpeted areas, • Sweep and mop passageways, • Clean door windows with Windex, • Clean containers and replace as necessary, • Clean and refill milk dispenser as needed when cartons of milk are not used, • Clean refrigerator salad bar and defrost after every meal, • Make coffee before each meal, clean machine after every meal, • Clean juice machine, refill as necessary, • Stock bread, peanut butter, butter and jelly, • Empty water tank in soup warmer and clean, • Replace soda boxes as needed, • Clean salad bar using two-pan method, • Sweep and mop floor, • Clean and refill dessert carousel at some locations NOTE: ENSURE HEARING PROTECTION AND GLOVES ARE USED AT ALL TIMES 90 • Separate trays, garbage, utensils, bowls, cups, and plates, • Rinse all dishes and utensils, and then load into dishwasher, • Unload dishwasher and place dishes and utensils in dish cart, • Put loaded dish carts away, • Take dish machine apart, rinse parts and clean inside and outside of machine, • Scrub dish table with bleach and soap after every meal. NOTE: MUST WEAR SAFETY GLOVES, APRON, AND GOGGLES • Scrape food out of cooking pans and then rinse with sprayer and hot water into garbage disposal, • Put pots and pans in the first sink with hot soapy water and scrub, then rinse in the second sink, • Put pots and pans in third sink with hot sanitizing solution., • Put pots and pans into pot machine, • When the cycle is complete, place clean pots and pans on rack to air dry. ∙ When pots and pans are dry, put them on shelf where cooks store cooking pots and pans in the galley, • Remove all trash from galley area and rinse garbage cans. This is done twice daily. When you start work and before you leave your work station at the end of the shift, all garbage must be cleared from galley, • Maintains clean shelves where clean pots and pans are stored, • Maintain pot machine and clean as you go, • Cleans walls and floors RESTROOM: NOTE: GLOVES ARE REQUIRED AT ALL TIMES • Clean all the toilets and sinks, using the cleaning solution provided, after chemical training, during cleaning., • Sweep and mop floors after cleaning., • Wash walls and polish all chrome., • Clean out all trash cans. Other duties as assigned 10 Supervisory/Decision making Authority Does the position require customary supervision and management of at least 2 or more full-time employees? ☐ Yes ☒ No Enter the number of direct reports and their position titles: None PHYSICAL REQUIREMENTS: Required • Standing, • Walking, • Lifting (Up to 50lbs), • Carrying (Up to 50lbs), • Kneeling, • Pushing/Pulling, • Bending/Stooping, • Reaching, • Turning, • Reading, • Housekeeping and/or cleaning agents Required • Respectful of government property, co workers, supervisors, and our military, • customer., • Team-oriented and collaborative interpersonal relationships Goodwill Industries of North Florida is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, ancestry, religion, orientation, age, sex, marital status, national origin, disability, genetic information, handicap or veteran status. Important Note Due to the volume of applications received, we are unable to provide information on application status by phone, e-mail, or in person. All qualified applicants will be considered, but may not necessarily receive an interview. Selected applicants will be contacted by the hiring agency for the next steps in the selection process. Applicants who are not selected will not receive notification. This position is subject to close at any time.

Job Description Structural Foreman Position Type:Full-time, Non-Exempt, Hourly Reports to:General Superintendent/Fabrication Manager/Lead Structural Foreman Supervisory Responsibility:Structural Team Location:Jacksonville, FL Company Summary Stellar Energy provides custom power augmentation and energy plant solutions for power generation and utilities, liquefied natural gas (LNG), data center, biopharma and other markets. Stellar Energy’s innovative solutions include turbine inlet air chilling, inlet air conditioning (heating and cooling), evaporative cooling, direct contact air chilling, thermal energy storage, district cooling and central utility plants. The company’s experience spans more than 20 years and stretches across the globe, with offices in the United States, Asia and the Middle East and North Africa (MENA) region. Summary Objective Exceptional experience in the direction and monitoring of structural fitters and structural welders. Proceed with the building of all structure related module assembly ready to ship and re-assemble. While under the direction of the Fabrication Superintendent, for the completion of Manufactured Chiller plants. Essential Functions -Identify teams for crew structure -Verify training level of crew members and seek training/qualifications as needed -Understand all standard operation procedures (SOP’s), safety procedures, and production guidelines -Work hand in hand with superintendent to meet any schedules or training -Monitor all tasks assigned and help verify critical layout and cuts to fit as needed in order to halt re-work -Enforce company procedures on standard operating procedures, building and assembly procedures, Hydro and chemical injection and most of all “safety procedures” -Seek to improve all operations to reduce man hours and improve safety -Work with the Engineering Department on solution and revisions -See to all proper maintenance of machinery and equipment related to job completions -Meet the company needs as well as the customer needs -Use all resources to ensure the proper completion on all projects such as QAQC inspections, Superintendent approval utilizing Kaizan implementations always seeking improvements. -Participate on daily turnover from 1st to 2nd shifts with detailed information both verbal and written -Monitor all materials use for individual projects to be sure it is correct -Monitor and maintain entire Fab Shop with all activities -Ensure the proper loading of modules as the tractor trailer arrives after assisting the wrap team being sure that all modules are labeled with Company Logo, banners and sign along with center of gravity stickers -Being part of the load out team, staying with it until the driver is safely on his way out -Monitor the proper staging of all structural assemblies and parts that they are processed and staged according to requirements, placed in the appropriate laydown area. -Maintain all laydowns areas and keep dunnage and debris to a minimum -Prepares for ISO 9001 and other audits. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Competencies -Team Builder / Leadership Attributes -Reliable Attendance -Strong Decision Making Ability -Excellent Communication Proficiency - Written and Verbal -Ethical Conduct -Problem Solving -Exceptional Organizational Skills -Attention to Detail - Thoroughness -Time Management Work Environment This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Expected Hours of Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 3:00 pm to 1:30 am. Occasional weekend work may be required as job duties demand. Travel Travel is primarily not required with exception to local travel during the business day. Required Education and Experience -High school diploma or GED -15+ Years’ experience in ‘Shipyard Mechanical’ trade with 5+ Years’ as qualifying Forman Position title -3+ Years’ experience in Welding SMAW, FCAW, GMAW and GTAW, or a combination thereof Preferred Education and Experience -Bachelor Degree -2+ years vocational technical training • Intermediate proficiency in Microsoft Excel, Word, Power Point, Outlook Work Authorization Must be authorized to work in USA. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description The Senior Process Engineer is responsible for leading the design and implementation of solutions that meet the needs of our food and beverage manufacturing operations. This role requires an understanding of food processing technologies, the design and delivery of production systems for food and beverage manufacturing facilities, with an emphasis on raw material storage, processing, thermal processing, mixing & blending, filling, and food safety compliance, as well as a commitment to sustainability and cost-effectiveness. The Process Engineer will work closely with cross-functional teams, including product development, marketing, engineering, architects, manufacturing, project management, and field staff to ensure that all process solutions are fully developed for a successful operation. Duties/Responsibilities: • Design processes to achieve project goals, • Define processing steps required to make food or beverage products, handle waste or byproducts, and cleaning systems., • Calculate equipment rates, create optimal food plant layouts, and prepare block and/or process flow diagrams to ensure all flows are understood and included in the design., • Engineer process equipment & systems, • Perform process calculations, size and select equipment & components; ensure designs comply with relevant codes, standards, & sanitary practices., • Develop P&ID’s, equipment specifications, installation specifications, equipment lists, controls narratives for coordination, and coordinate 3D modeling with design., • Coordinate with 3rd parties for equipment engineered by others, with internal or external project team members for integration of the process into plant infrastructure., • Support procurement of equipment & installation packages, • Assist in identifying suppliers & subcontractors, perform technical writing aspects in bid packages for scope definition, compile technical engineering documents for bid packages., • Participate in bid-scope reviews, assist in analyzing proposals, lead design reviews of drawings & models, attend coordination meetings, review submittals, participate in factory acceptance testing., • Support installation of process equipment, • Review installation submittals and participate in subcontractor coordination meetings., • Travel to site for technical assistance, coordinate directly with Stellar field staff and subcontractors, identify and resolve issues that arise, review installations for correctness, and revise drawings for as-built conditions., • Startup & commissioning of process equipment, • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Assist in process system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Maintain current knowledge of food manufacturing trends, regulatory requirements, and food industry-specific considerations., • Other duties as assigned.Required Skills/Abilities:, • Strong leadership and team collaboration skills., • Thorough understanding of the food industry, process systems, & plant operations., • Familiarity of startup and commissioning processes and procedures for process systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of industry regulations, and standards including safety as relates to food or beverage manufacturing systems., • Flexibility to work in different environments and adapt to changing project requirements.Education/Experience:, • Bachelor of Science Engineering degree in Chemical, Manufacturing, Mechanical, or a related field., • Advanced degrees or certifications in continuous improvement methodologies are advantageous., • Minimum of 1-7 years of experience in food or beverage manufacturing systems. Relevant professional certifications are a plus., • Experience in calibration, startup and commissioning of food or beverage process systems is preferred., • Knowledge of Ingredients and their reactions to heating, cooling, mixing, blending, pumping., • Knowledge of Process Controls that support recipe management and product repeatability., • Knowledge of 3A, USDA, or FDA sanitation requirements and regulatory entities., • Skilled in relevant software; Microsoft Office Software, AutoCAD, Inventor, Revit, Procore, Bluebeam, Adobe, Power BI, and ACC is preferred., • Experience with process design and engineering in a design-build or EPC setting., • Exposure to sustainability-focused initiatives such as water reuse, energy recovery, or nutrient capture is a plus.Travel Requirements:, • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures.Physical Requirements:, • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar: Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description Job Title: Operator Job Description We are looking for a Warehouse/ Production Worker to join our team. In this role, you will be responsible for unloading drums off trucks into our facility, moving empty drums to the filling station, and filling them. You will also move drums and totes around the facility using a dolly. Great opportunity for advancement with training to become a chemical operator. Responsibilities • Unload drums from trucks into the facility., • Move empty drums to the filling station and fill them., • Transport drums and totes around the facility using a dolly., • Shipping and receiving of materials., • Experience working in a production environment., • Experience in a hot, physical work environment., • Machine operation and assembly experience., • Ability to operate packaging and machine operating equipment., • Proficiency in reading blueprints., • Forklift operation experience., • Mechanical skills or aptitude is strongly preferred., • Experience in industries such as food processing, paper mills, pharmaceuticals, breweries, wineries, or distilleries is preferred, but not required Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Mar 20, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionJob Description: Text JOBS to 811DIG (811344) to connect with our hiring team today! Join the Team That Sets the Standard in Utility Locating Ready to take your career to the next level with a company that truly values integrity, hard work, and growth? Blood Hound is USIC's specialized division for advanced locating and infrastructure services. Using the most advanced electromagnetic locating equipment and ground-penetrating radar technology, Blood Hound accurately identifies and marks underground utilities and structures - including those unlocatable by traditional methods. Our capabilities extend even further with comprehensive utility mapping powered by patented drone technology and robotic camera sewer inspection, providing an unmatched level of precision and insight. At Blood Hound, we do more than locate utilities - we protect lives, prevent damage, and support the success of our customers every single day. Our technicians are the industry's most experienced, with an average of five years in the field. Coupled with ongoing, comprehensive training and the industry's most stringent certifications, our team is trusted to deliver the safest and highest quality underground utility locating and advanced infrastructure services. We're looking for motivated Advanced Locate Technicians who take pride in their craft and want to grow with a company that rewards results. You'll use advanced tools, problem-solving skills, and field expertise to locate and mark underground utilities with precision. Why Blood Hound? We don't just offer jobs - we build careers. When you join our team, you'll enjoy: * Competitive pay - $25-$29/hour based on experience. * Monthly performance & revenue-based bonuses - Share in the success of the company through monthly performance bonus opportunities, where you're eligible to receive a portion of the revenue you generate. * High-quality company vehicle & fuel card - All work-related expenses are paid. This means you won't be putting mileage on your personal vehicle for work. * Top-tier equipment - Company laptop, phone, and the newest, most advanced utility locating technology available. * DailyPay - Access your pay when you need it. * Comprehensive insurance options - A variety of excellent insurance choices including medical, dental, vision, and life. * 401(k) with company match - We'll help you save for the long term with our competitive 401(k) employer match program. * PTO & paid holidays - Even in your first year, so you can spend time with your loved ones. * Shift differentials - Earn extra money for work performed outside of normal business hours. * USIC All Stars - Our employee recognition program. Earn points for living our company values and celebrating milestones. Redeem your points for gift cards or merchandise! * Tenure Boots Program - $200 voucher to buy a new pair of work boots on your first anniversary and every year after. * Prescription eyewear plan - This is on top of our standard vision benefits. * Education Partnership & Scholarship Program - Discounted tuition for USIC employees, their spouses, and dependents through Indiana Tech (courses available online nationwide). Scholarships available for employees. Credit hours for completing our utility locator training curriculum and/or for military service. * Employee discounts & perks - Outstanding discounts at major retailers and service providers. What You'll Do * Travel to job sites and use company-provided, specialized equipment to accurately identify, locate, and mark all underground utilities and structures within scope, including those unlocatable by traditional methods and regardless of ownership or type. This can include abandoned facilities, chemical transport, and other exotic utilities. * Troubleshoot using your industry knowledge, advanced observational skills, problem-solving skills, deductive reasoning, and attention to detail to ensure safety and accuracy in every locate. * Help grow Blood Hound's reputation by delivering reliable, professional results every time. * Communicate professionally with job site contacts to ensure a smooth, safe, and complete locating process. * Maintain clear, courteous communication with customers and co-workers in the field. What We're Looking For * 2+ years of experience as a public or private utility locator with proven accuracy and professionalism. Experience with an engineering or SUE firm is a plus. * Experience locating multiple utility types in a variety of environments. * Strong communication and customer service skills. * Adept with technology, including Windows-based computers and Microsoft Office programs. Willing and able to learn new procedures and technologies. * An individual that upholds our core values of Safety, Pride, Integrity, Respect, and Excellence on every task, every day. * Ability to manage workload and deliver top-tier service independently. * Available to travel to job sites daily. Work overtime and after hours as dictated by business needs. Overnight travel may also be required at times. * Must pass a fit-to-work physical. At Blood Hound, your effort is recognized, your growth is supported, and your success is rewarded. Apply today and start building your future with Blood Hound! We are an Equal Opportunity Employer. Veterans are encouraged to apply. When texting, message and data rates may apply. View our terms and conditions here: and our privacy policy here: .

Job Description The Process Wastewater Engineer is responsible for leading the design and implementation of wastewater treatment solutions that meet the needs of our diverse wastewater types. This role requires a deep understanding of wastewater treatment technologies, the design and delivery of systems for food and beverage manufacturing facilities, with an emphasis on wastewater handling, treatment, and compliance, as well as a commitment to sustainability and cost-effectiveness. The Process Wastewater Engineer will work closely with cross-functional teams, including product development, marketing, engineering, architects, manufacturing, project management, and field staff to ensure wastewater treatment solutions are innovative, functional, and fully developed for a successful operation. Duties/Responsibilities: • Development and design of wastewater systems for industrial food processing plants., • Perform calculations and modeling for flow rates, equipment sizing, and chemical dosing related to wastewater treatment processes (e.g., screening, DAF, biological treatment, sludge management)., • Preparation of process flow diagrams (PFDs), P&IDs, equipment specifications, and system narratives for controls integration and operation of the system., • The Process Wastewater Engineer is responsible for selecting wastewater equipment in the system, and/or coordinating with 3rd party wastewater companies for selecting based on equipment specifications., • Coordinate with controls regarding selection of instrumentation to control and optimize the process., • Coordinate with project team during design phases of the project to integrate wastewater systems into plant-wide process layouts and utility infrastructure., • Review vendor submittals and assist in evaluating treatment technologies and equipment selections., • Contribute to environmental permitting documentation and support compliance with discharge regulations and standards., • Ensure wastewater system designs comply with relevant regulations, codes, and standards., • Identify and resolve any issues or discrepancies that arise during the procurement, manufacturing, and installation process, working closely with the team to implement solutions., • Assist in preparing comprehensive documentation of commissioning processes, test results, and system performance., • Assist in wastewater system testing and commissioning activities, including functional testing, performance testing, and safety testing., • Coordinate with clients and stakeholders for system handover, providing necessary documentation and training for operational staff., • Ensure all permits are in place and regulations are adhered to after turnover phase., • Maintain current knowledge of wastewater treatment trends, regulatory requirements, and food industry-specific wastewater considerations., • Other duties as assigned. Required Skills/Abilities: • Strong leadership and team collaboration skills., • Thorough understanding of wastewater treatment technologies such as DAF, biological treatment, nutrient removal, and pH/chemical control systems., • Familiarity of startup and commissioning processes and procedures for wastewater treatment systems., • Excellent analytical, problem-solving and troubleshooting abilities, capable of identifying and resolving issues., • Effective communication skills, both written and verbal, including interpersonal skills., • Innovative thinking and the ability to develop creative solutions., • Attention to detail and strong organizational skills., • Ability to work under pressure and meet tight deadlines., • Knowledge and understanding of industry regulations, and standards including safety as relates to wastewater systems., • Flexibility to work in different environments and adapt to changing project requirements. Education/Experience: • Bachelor of Science degree in Chemical, Environmental, Mechanical, or related field., • Minimum of 5-7 years of experience in wastewater systems. Relevant professional certifications are a plus., • Experience in food or beverage manufacturing wastewater treatment. Knowledge of food industry-specific wastewater challenges (e.g., BOD/COD loading, TSS, PH, FOG handling, sanitation impacts), • Experience in calibration, startup and commissioning of wastewater systems is preferred., • Exposer and / or skilled in relevant software; Microsoft Office Software, AutoCAD, Procore, Bluebeam, Adobe, Power BI, and BIM / ACC is preferred., • Experience with wastewater design and engineering in a design-build or EPC setting., • EIT certification or working toward PE licensure., • Exposure to sustainability-focused initiatives such as water reuse, energy recovery, or nutrient capture. Travel Requirements: • Ability to travel regularly for site visits, attend project meetings, corporate training, and events., • Ability to travel internationally, obtain and maintain a valid passport., • Travel expected to be at least 20%., • Flexibility to travel on short notice for urgent business needs., • Comfortable with various modes of transportation, including flights, trains, and rental cars., • Ability to navigate and work effectively in diverse geographical locations and time zones., • Ability to adapt to different cultures and customs while traveling., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements: • Ability to use a computer, phone, iPad, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use., • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials, • Ability to sit, stand, and walk for long periods of time, ability to climb flights of stairs and ladders., • Ability to bend, stoop, and reach as necessary., • Manual dexterity for operating office equipment, measuring devices, quality & testing devices., • Ability to work around machinery during installation, startup, commissioning, and troubleshooting., • Capability to handle occasional exposure to extreme heat, extreme cold, wet environments, and extreme odors. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job DescriptionDescription: LUV Car Wash was founded in Sept of 2021, and we have rapidly grown to over 80 locations in 6 states, including CA, NV, FL, GA, PA, and NJ. We are looking to add a Shift Supervisor with Maintenance Lead responsibilities to our growing team to help us continue our mission to become the best car wash in the industry. Location: 7780 Blanding Blvd, Jacksonville, FL 32244 Benefits: Commission Potential *401K match *Health Benefits/HSA Vision *Dental Life insurance Vacation/Sick Time or PTO Employee Discount program Employee Assistance Program (*Some benefits require a 1-year measurement period or age requirement) General Summary of Duties: The Shift Supervisor will safely direct guests and vehicles onto the car wash conveyor and discuss the membership options with all customers of LUV Car Wash. The Shift Supervisor will also be responsible for opening/closing procedures, supervising daily duties at LUV Car Wash, and maintaining a safe and clean environment for all LUV customers. Reports to: General Manager FLSA Status: Non-Exempt Physical Demands: • Physical ability to move equipment and tools as needed., • Must be able to lift min 30 pounds., • Work in changing environments, • Stand full shift., • Maintain a regular and reliable level of attendance and punctuality., • Assisting customers at the self-service kiosks on the property., • Market and brand the LUV membership options., • Open / Close operations daily., • Cleaning the tunnel and equipment., • Perform miscellaneous job-related duties as assigned., • Must complete all online trainings, pass the online test, and complete in-person training per merit., • Must remain up-to-date on applicable trainings pertaining to their tier and associated trainings as new trainings are launched or updated., • Responsible for the cleaning and organization of the backroom of the car wash, including but not limited to tools, work bench, spare parts, chemical organization, and overall cleaning., • Responsible for all the equipment Preventive Maintenance, including but not limited to greasing bearings, oil changes, belt replacements, filter cleanings, and other items on the PM Checklist., • Must ensure proper tension and smooth operation of the conveyor by conducting proper conveyor checks., • Responsible for keeping checklists and work orders on MaintainX up-to-date with accurate information pertaining to any PM or repair work orders., • Responsible for completing minor repairs such as bearings, shocks, spindles, oil changes, solenoids and valves, • Responsible for some of the larger repairs with or without a Maintenance Technician if needed, such as wrap replacement, assisting with blowers, Top Brush Repair, and other maintenance items. Requirements: Requirements: • 18 years of age required, • Physical ability to move equipment and tools as needed., • Must be able to lift min 30 pounds., • Must be Professional in appearance and attitude., • Able to work outdoors in all types of weather., • Attention to detail regarding safety and hazards