Electrical apprentice jobs in Columbus, OhioCreate job alerts

Job Description Lead Sign Installer / Installation Technician Location: Columbus, Ohio | Full-Time | Nationwide Travel Custom Sign Center is hiring an experienced Lead Sign Installer based in Columbus, Ohio. This role requires nationwide travel and the ability to lead installations for major signage programs. Responsibilities • Install commercial signage including channel letters, pylon signs, monument signs, LED displays, and canopy signage, • Operate crane trucks and bucket trucks, • Set poles and perform structural sign installations, • Supervise job sites and train apprentice installers, • Troubleshoot and problem-solve during installations, • Travel nationally for installations (typically one week at a time) Requirements: • 5+ years electrical sign installation experience, • Ability to operate crane and bucket trucks, • Crane operator certification preferred, • CDL license a plus, • Clean driving record, • Ability to travel nationwide What We Offer: • Competitive starting wages, • Company-paid travel time, • Company-paid hotels and meals, • Paid holidays, PTO, and vacation, • Medical, dental, vision, and life insurance, • Company pays 50% of employee medical premium, • Simple IRA with company contribution, • Positive team-oriented work environment Apply by sending your resume to:Teryl@Customsigncenter.com

Job DescriptionDescription: The Field Service Engineer Level 2 is an early-career field technician responsible for performing basic electrical maintenance, inspections, and testing activities under supervision. This role represents the transition from apprentice-level support to task ownership, with increasing responsibility for assigned work scopes and participation in more complex service projects. Core Responsibilities Electrical Maintenance & Inspection • Perform visual and mechanical inspections on low- and medium-voltage switchgear, switchboards, and circuit breakers., • Identify wear, overheating, contamination, or mechanical issues and report findings to senior technicians., • Perform cleaning and basic mechanical checks per established procedures. Electrical Testing & Measurements • Conduct insulation resistance, continuity, voltage, and current testing under supervision., • Assist with test setup, connection verification, and teardown., • Record test data accurately for service reports. Power Distribution Equipment Support • Perform visual inspections and basic maintenance on ATS, RPPs, and PDUs., • Replace filters, verify indicators and alarms, and perform basic control checks., • Escalate abnormal conditions to senior technicians or the Field Engineer. Generator & Battery System Support • Assist with generator preventive maintenance including visual inspections and fluid checks., • Support battery inspections, terminal checks, and basic voltage readings., • Assist with load testing under direction. Transformer & Cable Work • Support transformer tap checks, nameplate verification, and inspections., • Assist with infrared (IR) scan preparation and documentation., • Support cable terminations and grounding verification under supervision. Safety, Isolation & Grounding • Participate in equipment isolation, lockout/tagout (LOTO), and grounding activities., • Verify zero-energy states as directed., • Participate in Job Hazard Analyses (JHAs) and on-site safety briefings., • Follow all safety requirements (NFPA 70E, OSHA) and customer site-specific rules. Documentation & Professional Practices • Complete service reports, test sheets, and time documentation accurately and on schedule., • Maintain accountability for tools, equipment, and materials., • Communicate professionally with supervisors, team members, and customer personnel. Required Qualifications • High school diploma or GED required; technical school, military electrical training, or Associate's degree a plus., • 1–2 years of electrical field service or industrial experience preferred., • Working knowledge of electrical safety practices, including LOTO and arc-flash awareness., • Ability to read basic one-line diagrams, wiring diagrams, and schematics., • Valid driver's license and ability to travel as required. Preferred Qualifications • OSHA 10 or OSHA 30 certification., • Manufacturer/OEM training on switchgear, breakers, ATS, generators, or UPS platforms., • Prior apprentice or industrial maintenance experience. Knowledge, Skills & Abilities • Working knowledge of meggers, clamp meters, multimeters, and torque wrenches., • Understanding of LV/MV system configurations and grounding principles., • Demonstrated adherence to safety policies and documentation standards., • Willingness to learn, take direction, and follow established procedures., • Clear written and verbal communication., • Basic proficiency with Microsoft Office (Word, Excel) and mobile/field reporting tools. Tools & Technology • Multimeters, clamp meters, insulation resistance testers (meggers), and continuity testers., • Torque wrenches, hand tools, and standard power tools., • Mobile field service applications and document/reporting systems. Working Conditions & Travel • Primarily field-based at customer facilities including industrial plants, utilities, data centers, commercial facilities, and substations., • Travel typically 40–60% depending on region and workload; may include nights, weekends, and emergency call-outs., • Work may be performed in confined spaces, on elevated platforms, in hot/cold environments, and around energized equipment per safety rules., • Must be able to wear required PPE including arc-rated clothing, hard hat, gloves, safety glasses, hearing protection, and fall protection as needed. Physical Requirements • Ability to lift and carry up to 50 lbs (23 kg) and move test equipment and tools., • Ability to stand, kneel, bend, climb ladders/stairs, and work at heights for extended periods., • Ability to differentiate conductor colors and indicator states and read instruments and displays. Disclaimer The statements above are intended to describe the general nature and level of work being performed. They are not an exhaustive list of all responsibilities, duties, or skills required. Forgent Power reserves the right to modify, interpret, or apply this job description as needed. Equal Employment Opportunity Statement Forgent Power is an equal opportunity employer. We are committed to creating an inclusive environment for all employees. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected class. #LI-EC1 Requirements:

Job Description Ricart Kia in Columbus, OH, is seeking Military Veterans with mechanical experience who are interested in beginning a rewarding career as an Automotive Service Technician. This position is part of the Kia Veterans Technician Apprenticeship Program (VTAP), a structured apprenticeship program created by Kia America to help Military Veterans transition into the automotive industry. Through this program, participants gain hands-on dealership experience while completing a one-year competency-based apprenticeship that leads to Kia Service Technician certification. VTAP provides Veterans the opportunity to work full-time at a participating Kia dealership while receiving the training, tools, and support needed to develop into highly skilled automotive technicians. The program is GI Bill® approved, allowing eligible Veterans to receive Monthly Housing Allowance (MHA) during their apprenticeship. As an Automotive Technician Apprentice, you will work alongside experienced technicians and service professionals while developing the technical knowledge and practical skills necessary to diagnose, service, and repair Kia vehicles. Job Responsibilities • Diagnose, maintain, and repair Kia vehicles, including engines, transmissions, steering, suspension, brakes, HVAC, and electrical systems, • Perform vehicle inspections, diagnostics, and mechanical repairs using Kia diagnostic procedures and equipment, • Complete repair orders and warranty documentation according to Kia and dealership policies, • Test drive vehicles and verify repair quality using appropriate diagnostic tools and equipment, • Communicate effectively with service advisors and shop foremen to ensure a positive customer experience, • Maintain a safe, organized, and efficient work environment while following dealership safety procedures Requirements • Honorable Discharge from U.S. Military Service, • Valid driver’s license with a clean driving record, • Prior experience in a mechanical or technical field, • Strong troubleshooting and diagnostic skills, • Ability to work in a fast-paced dealership service environment, • Willingness to complete background check and drug screening Preferred Skills (Not Required) • Basic automotive maintenance or repair experience, • Familiarity with diagnostic tools and hand tools, • Experience working with engines, electrical systems, or mechanical equipment, • ASE certifications or technical training (a plus) Benefits Kia VTAP Apprenticeship Highlights • Full-time employment with a participating Kia Retailer, • A program designed specifically for Military Veterans, facilitated by Veterans, • Participation in a one-year, competency-based GI Bill®-approved apprenticeship leading to Kia Service Technician certification, • Eligible Veterans may receive a Monthly Housing Allowance (MHA) through the GI Bill® during the apprenticeship

Champions Do More As one of the fastest-growing and most exciting brands in the industry, Crash Champions is the largest founder-led multi-shop operator (MSO) of high-quality collision repair service in the U.S. The company, which also operates the growing Crash Champions LUXE | EV Certified brand of highline and luxury EV repair centers, services customers at more than 650 state-of-the-art locations in 38 states across the U.S. Crash Champions was founded in 1999 as a single Chicago repair center by industry veteran and 2023 EY Entrepreneur of the Year Midwest award winner Matt Ebert . For more than 25 years, our vision has been anchored by the belief that delivering superior collision repair service is about People First. Welcome to Crash Champions. We Champion People. Responsibilities • Examines damaged vehicle and efficiently plans repair process., • Works and communicates with others on vehicle repair status., • Performs quality repairs while keeping on-time status in mind., • Makes decisions on repair vs. replace considering safety, cost, and cycle time., • Removes upholstery, accessories, electrical and hydraulic window operating equipment, and trim to gain access to vehicle and fenders., • Participates in all required safety meetings., • Files, grinds, and sands repaired surfaces, using power tools and hand tools., • Directs the work of an apprentice in the performance of tasks when needed, i.e., unusual problems or questions and explains procedures to assistant. Qualifications • Ability to use frame machine., • Certification in body repair preferred., • Knowledge of vehicle repair process by manufacturer., • I-CAR welding certified., • Skill in analyzing and interpreting measuring data., • Ability to supervise repair personnel., • Must be able to pass thorough background check Benefits The Company offers the following benefits for this position, subject to applicable eligibility requirements and annual updates: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Group Life Insurance, • Disability Insurance, • 401k Retirement Plan with match, • Referral Bonus (“Cash From Crash”), • 5 Paid Holidays We are committed to providing competitive compensation for this role. The actual offer will be based on various factors, including but not limited to: job related knowledge, skills, experience, relevant certifications and qualifications. This position is paid on a commission/ flag rate structure. Flag pay is guaranteed to meet local minimum wage requirements for all hours worked each week. The compensation range listed is the average flag pay range for a typical full-time employee in this position. The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. Submit a Referral Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $161,640.00/Yr. ID 2026-19348 Category Body Technician Position Type Regular Full-Time Location : Postal Code 43228 Location : Address 4000 Sullivant Avenue Remote No Posted Min Pay Rate USD $65,000.00/Yr. Posted Max Pay Rate USD $161,640.00/Yr. Prioritization Tier 1 – Priority

Come join our team as a Plumber I! We’re currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES • Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures., • Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings., • Ensure adherence to safety and quality of work standards., • Deliberately manage materials needed for various projects., • Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days., • Precisely and regularly maintain a clean and organized jobsite., • Thoughtfully follow directions and processes given by site leadership., • Enthusiastically motivated to learn the plumbing trade., • Maintain compliance with state trade licensing programs., • Build knowledge of Plumbing Code., • Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS • Motivated work ethic., • Clear verbal communication skills., • Basic mathematical ability including addition, subtraction, multiplication, and division., • Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings., • Critical thinking skills and ability to problem solve independently., • A high school diploma or GED is required., • Valid driver license is required., • Obtain apprentice licensing in appropriate states., • Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat., • The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces., • There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations., • Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear., • Must be able to climb or balance regularly., • Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion., • Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials., • Wear job site-specific personal protective equipment and be able to lift at least 50 pounds., • Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS • Medical, • Dental, • Vision, • Short- & long-term disability, • Accrued PTO, • Paid holidays, • 401(K), • Profit sharing It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at _ to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Come join our team as a Plumber I! We’re currently looking for Plumber I candidates. The position of Plumber I is critical to learning the plumbing trade and steadily improving both quality and speed over time. RESPONSIBILITIES • Studiously learn the necessary aspects of drain, waste, vent (DWV), water systems, and other aspects including but not limited to setting of tubs and installation of plumbing fittings and fixtures., • Accurately build and install complete plumbing systems showcasing a clear understanding of all types of plumbing fittings., • Ensure adherence to safety and quality of work standards., • Deliberately manage materials needed for various projects., • Steadily accumulate knowledge of basic tools required for plumbing work (soldering, cutting, and notching) and be able to put that knowledge into use within thirty (30) days., • Precisely and regularly maintain a clean and organized jobsite., • Thoughtfully follow directions and processes given by site leadership., • Enthusiastically motivated to learn the plumbing trade., • Maintain compliance with state trade licensing programs., • Build knowledge of Plumbing Code., • Maintain excellent attendance and punctuality to adhere to work schedule. QUALIFICATIONS • Motivated work ethic., • Clear verbal communication skills., • Basic mathematical ability including addition, subtraction, multiplication, and division., • Ability to read, write, and interpret reports and documents such as safety rules, operating instructions, procedure manual, and blueprints / CAD drawings., • Critical thinking skills and ability to problem solve independently., • A high school diploma or GED is required., • Valid driver license is required., • Obtain apprentice licensing in appropriate states., • Exposed to outdoor weather conditions including rain, humidity, snow, wind, cold, and heat., • The environment may include very loud noises, working near mechanical and moving parts, working at various heights, and small, awkward, confining workspaces., • There is the possibility of inhalation of fumes and airborne particles as well as the risk of electrical shock and vibrations., • Must be able to do the following activities for most of the workday: stand, walk, use hands or fingers, handle or feel, reach with hands and arms, stoop, kneel, crouch or crawl, see, talk, and hear., • Must be able to climb or balance regularly., • Near constant lifting or carrying of items of various weights, typically up to 10 pounds most of the day. Capable of lifting at least 50 pounds on occasion., • Manual dexterity sufficient to reach/handle items, work with the fingers, and perceive attributes of objects and materials., • Wear job site-specific personal protective equipment and be able to lift at least 50 pounds., • Possible travel to out of town/out of state projects SCHEDULE: Monday to Friday LOCATION: On-site SALARY: $18-$26 hourly BENEFITS • Medical, • Dental, • Vision, • Short- & long-term disability, • Accrued PTO, • Paid holidays, • 401(K), • Profit sharing It’s time to join the team at R.T. Moore, a mid-size mechanical contractor company where you are more than a number. Here everyone is treated with respect, and leadership cares about you as a person and listens to your input. Plus enjoy a steady Monday-Friday schedule, with no nights or weekends! Ready to get Moore? Check us out at _ to join one of the largest mechanical contractors in the nation! R.T. Moore is an Equal Opportunity Employer Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Gibson Electrical LLC is seeking motivated and hardworking individuals interested in starting their careers as an Electrician. This full-time Pre-Apprentice position is ideal for those not currently in an accredited apprenticeship program but looking to take the first step toward becoming a certified Journeyman Electrician. As a Pre-Apprentice, you will work in a structured environment while gaining foundational knowledge in safety, tools, materials, equipment and the fundamentals of electrical construction. Key Responsibilities • Assist Journeyman Electricians: Help with installations, repairs, and general electrical maintenance., • Follow Safety Protocols: Learn and adhere to all safety guidelines on the job., • Handle Tools & Equipment: Proper use and maintenance of hand and power tools., • Learn Basic Electrical Concepts: Gain understanding of electrical systems, components, and circuitry., • Perform Basic Tasks: Complete supervised entry-level tasks such as running wire and replacing fixtures., • Read Blueprints: Develop the ability to interpret basic blueprints and schematics., • Maintain Work Areas: Keep tools and materials organized and clean., • Participate in Training: Attend workshops and training sessions to build knowledge and skills., • Assist with Inspections: Help ensure work complies with electrical codes and standards., • Communicate Effectively: Work closely with team members to report progress and address challenges. Qualifications & Requirements • High School Diploma or equivalent, • Ability to read and understand written materials, • Valid driver's license and clean driving record, • Reliable transportation, • Must be able to pass drug/alcohol testing, • Flexible work schedule, • Must own basic hand tools (tool list provided upon hiring), • No prior experience necessary, though relevant experience is a plus Physical Requirements • Ability to sit, stand, walk, reach, climb, kneel, crouch, and crawl, • Lift or move up to 50 lbsWork Schedule Monday - Friday, 7:00 AM - 3:30 PM* *Subject to change. Must be flexible to accommodate project demands Compensation & Benefits • Competitive wage based on experience and position, • Benefits package includes:, • Medical, • Dental, • Vision, • Paid Vacation & Holidays, • SIMPLE IRA, with up to 3% Employer MatchEqual Opportunity Employment Gibson Electrical LLC is a Drug-Free Workplace and an Equal Opportunity Employer. We comply with all applicable laws and regulations and prohibit discrimination or harassment based on race, color, religion, sex, gender identity or expression, sexual orientation, age, disability, genetic information, veteran status, or any other protected characteristic. Must be able to pass a drug screening

Job DescriptionDescription: * Up to $3,000.00 Sign on bonus for Certified Journeyman* The Romanoff Group of Companies, headquartered in Columbus, Ohio, with offices in eleven markets covering eight states, are a blend of commercial and residential, electrical, heating & cooling, and plumbing companies primarily serving the new housing construction market. Since our founding in 1982, our growth has been fueled by the pride and craftsmanship of our team, supported by exceptional project management and industry-leading expertise. As a 100% employee-owned company, we are deeply committed to the success of our team. This sense of ownership is reflected in the professionalism, integrity, and dedication we bring to every project — and in the positive impact we strive to make in the communities we serve. We are actively seeking qualified candidates for the Commercial Electrician position to join our award-winning team. Great Reasons to Join: • 10x Employee Voted Top Workplace, • Highly Competitive Wage, • Excellent Benefits Package (Health/HSA/Vision/Dental/Life/STD/LTD/Accident and Critical Illness), • $15k Company Paid Life Insurance, • 401(k), • Employee Stock Ownership Plan (We are 100% employee owned), • Training and Support, • Paid Time Off and Paid Holidays, • Advancement Opportunities, • Paid Apprenticeship and Educational Reimbursement * Up to $3,000.00 Sign on bonus for Certified Journeyman* $1,000.00 for 1-2 years of experience $2,000.00 for 3-4 years of experience $3,000.00 for 5+ years of experience Standard Work Schedule: • Monday - Friday 7:00am - 4:00pm. MUST be willing to be flexible as jobs may change. Position Summary: The Commercial Electrician is responsible for the installation, maintenance, and troubleshooting of various trade specific systems. Position Responsibilities: • Interpret and follow blueprints, diagrams, schematics, and technical drawings to ensure accurate installation and configuration of systems., • Install and maintain trade specific equipment, systems, and other building infrastructure according to industry standards and codes., • Test electrical systems for functionality, continuity, and compliance with safety and operational standards., • Inspect systems to ensure proper installation and troubleshoot issues when they are found., • Identify, assess, and mitigate safety risks in line with company and industry safety policies., • Follow safety protocols, including lock-out/tag-out procedures, to prevent accidents., • Adhere to national, state, and local codes (e.g., NEC, plumbing, HVAC) for all worksite activities., • Maintain a clean and safe working environment by observing housekeeping practices and ensuring compliance with safety standards., • Work closely with contractors, electricians, HVAC technicians, and other trades to coordinate worksite activities and ensure seamless project integration., • Communicate effectively with team members, superintendents, and project managers to meet project deadlines and requirements., • Mentor apprentices and co-workers in safe practices, technical skills, and proper tool usage., • Identify and organize required materials, tools, and equipment for tasks; maintain proper inventory control., • Safely handle, store, and maintain tools, equipment, and materials., • Submit accurate requests for necessary supplies and materials., • Represent the company professionally at job sites through positive interactions with clients, contractors, and team members., • Additional duties as assigned. Qualifications: • Required: High School diploma or GED., • Required: Proven experience in the installation, maintenance, and troubleshooting of electrical systems., • Required: Valid driver's license., • Preferred: Ability to read and comprehend written (English) material., • Preferred: Completion of apprentice program or earlier technical program., • Proficient in MS Office Suite, Procore, and Fieldwire or similar software. Physical Demands: • Must be able to adhere to large amounts of standing, walking, bending, squatting, sitting, and lifting., • Must be able to pick up, lift, carry and move up to 50 lbs., • Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Benefits and Compensation: We provide a comprehensive package of employee benefits including: Medical, Dental, Vision, Life/AD additional voluntary benefits such as STD, LTD, Critical Illness, Accident Insurance, paid vacation, and holidays; 401(k) and company paid Life Insurance, and we are 100% Employee Owned. Must be able to pass a pre-employment drug screen and background check. EEO Statement: We are proud to be an Equal Opportunity Employer and will provide employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws and prohibit discrimination and/or harassment of any kind. Requirements:

Job DescriptionDescription: The Romanoff Group of Companies, headquartered in Columbus, Ohio, with offices in eleven markets covering eight states, are a blend of commercial and residential, electrical, heating & cooling, and plumbing companies primarily serving the new housing construction market. Since our founding in 1982, our growth has been fueled by the pride and craftsmanship of our team, supported by exceptional project management and industry-leading expertise. As a 100% employee-owned company, we are deeply committed to the success of our team. This sense of ownership is reflected in the professionalism, integrity, and dedication we bring to every project — and in the positive impact we strive to make in the communities we serve. We are actively seeking qualified candidates for the Installer- Electrician position to join our award-winning team. Great Reasons to Join: • 10x Employee Voted Top Workplace, • Highly Competitive Wage, • Excellent Benefits Package (Health/HSA/Vision/Dental/Life/STD/LTD/Accident and Critical Illness), • $15k Company Paid Life Insurance, • 401(k), • Employee Stock Ownership Plan (We are 100% employee owned), • Training and Support, • Paid Time Off and Paid Holidays, • Advancement Opportunities, • Paid Apprenticeship and Educational Reimbursement Standard Work Schedule: • Monday - Friday 7:00am - 4:00pm. MUST be willing to be flexible as jobs may change. Position Summary: The Installer- Electrician is responsible for the installation, maintenance, and troubleshooting of various electrical specific systems. An Installer-Electrician will be working multi-family projects. Position Responsibilities: • Interpret and follow blueprints, diagrams, schematics, and technical drawings to ensure accurate installation and configuration of systems., • Install and maintain trade specific equipment, systems, and other building infrastructure according to industry standards and codes., • Test electrical systems for functionality, continuity, and compliance with safety and operational standards., • Inspect systems to ensure proper installation and troubleshoot issues when they are found., • Identify, assess, and mitigate safety risks in line with company and industry safety policies., • Follow safety protocols, including lock-out/tag-out procedures, to prevent accidents., • Adhere to national, state, and local codes (e.g., NEC, plumbing, HVAC) for all worksite activities., • Maintain a clean and safe working environment by observing housekeeping practices and ensuring compliance with safety standards., • Work closely with contractors, electricians, HVAC technicians, and other trades to coordinate worksite activities and ensure seamless project integration., • Communicate effectively with team members, superintendents, and project managers to meet project deadlines and requirements., • Mentor apprentices and co-workers in safe practices, technical skills, and proper tool usage., • Identify and organize required materials, tools, and equipment for tasks; maintain proper inventory control., • Safely handle, store, and maintain tools, equipment, and materials., • Submit accurate requests for necessary supplies and materials., • Represent the company professionally at job sites through positive interactions with clients, contractors, and team members., • Additional duties as assigned. Qualifications: • Required: High School diploma or GED., • Required: Proven experience in the installation, maintenance, and troubleshooting of electrical systems., • Required: Valid driver's license., • Preferred: Ability to read and comprehend written (English) material., • Preferred: Completion of apprentice program or earlier technical program., • Proficient in MS Office Suite, Procore, and Fieldwire or similar software. Physical Demands: • Must be able to adhere to large amounts of standing, walking, bending, squatting, sitting, and lifting., • Must be able to pick up, lift, carry and move up to 50 lbs., • Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Benefits and Compensation: We provide a comprehensive package of employee benefits including: Medical, Dental, Vision, Life/AD additional voluntary benefits such as STD, LTD, Critical Illness, Accident Insurance, paid vacation, and holidays; 401(k) and company paid Life Insurance, and we are 100% Employee Owned. Must be able to pass a pre-employment drug screen and background check. EEO Statement: We are proud to be an Equal Opportunity Employer and will provide employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws and prohibit discrimination and/or harassment of any kind. Requirements:

Job DescriptionCommercial Apprentice Must Have a Minimum of 1 year of Experience. Reli Electric is seeking motivated Commercial Electrician Apprentices to join our growing team! We’re looking for dependable individuals with at least two years of commercial electrical experience who are eager to learn, work hard, and advance in the trade. If you thrive in a team environment and want to build a long-term career with a company that values skill, dedication, and professionalism, this is the place for you. Position Overview:As a Commercial Apprentice, you’ll assist in light commercial tenant improvement projects, new construction, and remodels. You’ll work alongside experienced electricians while gaining hands-on training and opportunities for advancement. Key Responsibilities: • Assist with layout and installation of electrical wiring, conduit installation, equipment, and fixtures per job specifications and local codes., • Use hand tools, power tools, testing devices, and measuring equipment under the guidance of experienced electricians., • Read and follow blueprints to ensure accurate placement of wiring and equipment while maintaining safety standards., • Help install, maintain, and repair systems at various heights using ladders, scaffolds, and lifts., • Run conduit and wiring through ceilings, walls, and exposed locations to ensure proper connectivity., • Pull wire, install conduit, and support the completion of project specifications. Benefits: • Paid vacation and holidays, • Sick leave, • 401(k) with company match, • Comprehensive health, dental, vision, and life insurance, • Employee health benefit packages, • Partnership with IEC’s 4-Year Apprenticeship Program – continue your education while you work, • IEC training and certification programs for career growth, • Paid testing and certifications for fire alarm and specialty systems Why Join Us?We want apprentices who are serious about learning the trade and ready to get things done. Reli Electric provides in-house training, opportunities for certifications, and the chance to advance into journeyman roles. Our IEC partnership ensures you can build a solid career foundation while earning competitive pay. Job Type: Full-time Pay: $20.00 – $25.00 per hour Compensation Package: • Hourly pay with overtime opportunities, • Bonus opportunities, • Double time pay for holidays Schedule: • 8-hour shifts, • Day shift Work Location: In person Reli Electric is an Equal Opportunity Employer and a Drug-Free Workplace.

Job Description Join MCAT Solutions LLC as an Electrical Control Apprentice in Columbus, OH! This full-time, onsite role is an awesome launchpad for recent trade school grads eager to dive into the world of skilled trades. You’ll get your hands dirty working with controls wiring, sensor wiring, and control panel wiring, while learning from experienced pros. Expect to tackle real-world challenges as you assist with BAS systems, becoming a key player in building automation installation alongside seasoned automation technician trainees. With a pay range of $19-$24 an hour based on experience, this is not just a job; it’s an exciting opportunity to develop your skills as a low voltage apprentice while having fun in a customer-focused, high-performance atmosphere. You will be offered great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Health Savings Account, Competitive Salary, Paid Time Off, and Unlimited Paid Time Off. Take the leap into an adventurous career where every day brings new problems to solve and innovations to explore! MCAT Solutions LLC: What drives us We are a small, family‑owned business that believes in investing in people, not just filling positions. Our team is built on hard work, honesty, and a commitment to helping employees build long‑term careers. We promote from within and provide hands‑on training to anyone willing to learn and grow. If you’re looking for a place where your effort genuinely matters, you’ll fit right in here. What would you do as a Electrical Control Apprentice As an Electrical Control Apprentice at MCAT Solutions LLC, you’ll jump right into the action! Your day-to-day will involve assisting experienced technicians with controls wiring, sensor wiring, and control panel wiring tasks. You’ll engage with BAS systems, learning how to troubleshoot and install building automation solutions. Expect to work alongside automation technician trainees and field technician trainees, absorbing their expertise and tackling hands-on projects. Your schedule will be Monday to Friday, from 6 AM to 4:30 PM, allowing for a structured yet flexible workday. Each day will present new challenges as you develop your skills in low voltage installations and commissioning assistant tasks, fostering a collaborative and customer-centric environment. You'll be encouraged to bring your problem-solving mindset, contributing to innovative projects that make our work exciting! Are you a good fit for this Electrical Control Apprentice job? To thrive as an Electrical Control Apprentice at MCAT Solutions LLC, you'll need a mix of hands-on skills and a passion for learning. Being proficient in safely using basic hand tools and power tools is crucial, as you'll be involved in controls wiring and other electrical tasks daily. Accuracy is key; you'll need to comfortably read and measure with a tape measure to ensure precise installations in building automation systems. Additionally, since some of your work may involve heights, a comfort level with working on ladders and lifts is essential. A proactive attitude, combined with strong problem-solving skills and the ability to adapt to new technologies, will set you up for success. Embrace a customer-centric mindset, and you'll contribute significantly to our innovative projects in the skilled trades! Knowledge and skills required for the position are: • Able to safely use basic hand tools and power tools., • Able to accurately read and measure using a tape measure., • Comfortable working at heights (on Ladders & Lifts)Join our team today! If you think this role will suit your needs, great! Applying is a piece of cake. Good luck - we're excited to meet you! MCAT is an equal-opportunity employer. The company does not discriminate in its employment decisions against individuals on the basis of race, color, national origin, religion, sex, gender identity, sexual orientation, disability, age, marital status, family/parental status, income, political beliefs, or any other characteristic protected by federal, state or local law.

Job Description The Romanoff Group of Companies, headquartered in Columbus, Ohio, with offices in eleven markets covering eight states, are a blend of commercial and residential, electrical, heating & cooling, and plumbing companies primarily serving the new housing construction market. Since our founding in 1982, our growth has been fueled by the pride and craftsmanship of our team, supported by exceptional project management and industry-leading expertise. As a 100% employee-owned company, we are deeply committed to the success of our team. This sense of ownership is reflected in the professionalism, integrity, and dedication we bring to every project — and in the positive impact we strive to make in the communities we serve. We are actively seeking qualified candidates for the Commercial Electrician position to join our award-winning team. Great Reasons to Join: • 10x Employee Voted Top Workplace, • Highly Competitive Wage, • Excellent Benefits Package (Health/HSA/Vision/Dental/Life/STD/LTD/Accident and Critical Illness), • $15k Company Paid Life Insurance, • 401(k), • Employee Stock Ownership Plan (We are 100% employee owned), • Training and Support, • Paid Time Off and Paid Holidays, • Advancement Opportunities, • Paid Apprenticeship and Educational Reimbursement * Up to $3,000.00 Sign on bonus for Certified Journeyman* $1,000.00 for 1-2 years of experience $2,000.00 for 3-4 years of experience $3,000.00 for 5+ years of experience Standard Work Schedule: • Monday - Friday 7:00am - 4:00pm. MUST be willing to be flexible as jobs may change. Position Summary: The Commercial Electrician is responsible for the installation, maintenance, and troubleshooting of various trade specific systems. Position Responsibilities: • Interpret and follow blueprints, diagrams, schematics, and technical drawings to ensure accurate installation and configuration of systems., • Install and maintain trade specific equipment, systems, and other building infrastructure according to industry standards and codes., • Test electrical systems for functionality, continuity, and compliance with safety and operational standards., • Inspect systems to ensure proper installation and troubleshoot issues when they are found., • Identify, assess, and mitigate safety risks in line with company and industry safety policies., • Follow safety protocols, including lock-out/tag-out procedures, to prevent accidents., • Adhere to national, state, and local codes (e.g., NEC, plumbing, HVAC) for all worksite activities., • Maintain a clean and safe working environment by observing housekeeping practices and ensuring compliance with safety standards., • Work closely with contractors, electricians, HVAC technicians, and other trades to coordinate worksite activities and ensure seamless project integration., • Communicate effectively with team members, superintendents, and project managers to meet project deadlines and requirements., • Mentor apprentices and co-workers in safe practices, technical skills, and proper tool usage., • Identify and organize required materials, tools, and equipment for tasks; maintain proper inventory control., • Safely handle, store, and maintain tools, equipment, and materials., • Submit accurate requests for necessary supplies and materials., • Represent the company professionally at job sites through positive interactions with clients, contractors, and team members., • Additional duties as assigned. Qualifications: • Required: High School diploma or GED., • Required: Proven experience in the installation, maintenance, and troubleshooting of electrical systems., • Required: Valid driver's license., • Preferred: Ability to read and comprehend written (English) material., • Preferred: Completion of apprentice program or earlier technical program., • Proficient in MS Office Suite, Procore, and Fieldwire or similar software. Physical Demands: • Must be able to adhere to large amounts of standing, walking, bending, squatting, sitting, and lifting., • Must be able to pick up, lift, carry and move up to 50 lbs., • Must be able to work in all weather conditions (including heat, rain, cold and wind) while wearing appropriate PPE. Benefits and Compensation: We provide a comprehensive package of employee benefits including: Medical, Dental, Vision, Life/AD additional voluntary benefits such as STD, LTD, Critical Illness, Accident Insurance, paid vacation, and holidays; 401(k) and company paid Life Insurance, and we are 100% Employee Owned. Must be able to pass a pre-employment drug screen and background check. EEO Statement: We are proud to be an Equal Opportunity Employer and will provide employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws and prohibit discrimination and/or harassment of any kind. Company DescriptionThe Romanoff Group of Companies, headquartered in Columbus, Ohio, with offices in eleven markets covering seven states, are a blend of commercial and residential, electrical, and heating & cooling companies primarily serving the new housing construction market. Since our company began in 1982, our growth has been firmly rooted in the pride of our craftsmen, coupled with a blend of stellar project management and industry leading knowledge. As a 100% employee-owned company, we share a commitment to our team success and represent that responsibility in a professional, dynamic way to both our clients and the communities in which we serve.The Romanoff Group of Companies, headquartered in Columbus, Ohio, with offices in eleven markets covering seven states, are a blend of commercial and residential, electrical, and heating & cooling companies primarily serving the new housing construction market. Since our company began in 1982, our growth has been firmly rooted in the pride of our craftsmen, coupled with a blend of stellar project management and industry leading knowledge. As a 100% employee-owned company, we share a commitment to our team success and represent that responsibility in a professional, dynamic way to both our clients and the communities in which we serve.

Electrical Control Engineer Dallas, NC Experience level: Mid-senior Experience required: 10 Years Education level: Associate degree Job function: Engineering Industry: Electrical/Electronic Manufacturing Compensation: $81,000 - $90,000_ Total position: 1 Relocation assistance: No SUMMARY: Providing technical and engineering support for automated industrial machinery and industrial electronic controls. ESSENTIAL DUTIES AND RESPONSIBILITIES Other duties may be assigned. • Read, create, and modify electrical schematics according to IEC and NFPA standards., • Read, create, and modify fluid power (hydraulics and pneumatics) schematics according to IEC and NFPA standards., • Read, create, and modify P&ID schematics according to IEC and NFPA standards., • Read, create, and modify programming code in the following languages: Siemens Structured Control Language (SCL), Siemens Statement List, Siemens Graph 7, Siemens Function Block Diagram (FBD), Ladder Logic (Siemens, Allen Bradley and others), Allen Bradley Structured Text, Microsoft Visual Basic, C++, C#, Java, Python, Microsoft SQL, and others., • Read, create, and modify database tables in MSSQL server., • Read, create, and modify HMI programs for Siemens, Allen Bradley, and other HMIs, this includes using WinCC Flex and Panel Builder 32., • Read, create, and modify SCADA programs for Siemens WinCC, and Inductive Automation., • Install, commission, repair and troubleshoot any brand of PLC, HMI or VFD., • Install, commission, repair and troubleshoot any industrial communications media and protocols., • Install, commission, repair and troubleshoot a wide range of industrial machinery., • Upgrade and retrofit controls that are obsolete with no direct replacements available. This requires making all necessary modifications to existing equipment., • Possess exemplary troubleshooting skills and be able to repair any machinery from any manufacturer., • Properly use oscilloscopes, test meters, megohmmeters, process calibrators, thermal imagers, vibrations analyzers, data loggers and any other test equipment., • Sources all necessary materials for projects and repairs and works with maintenance inventory clerk to acquire needed materials in timely manner., • Train technicians and apprentices the proper methods and procedures for process instrumentation calibration., • Train technicians and apprentices how to read and understand programming code and logic., • Train technicians and apprentices the best practices and methods of troubleshooting components of electrical controls systems., • Train technicians and apprentices about fluid power systems, and how to troubleshoot and repair these systems., • Must be able to perform all duties with minimal outside support., • Ensure all work is performed and executed safely. Must identify and correctly use appropriate PPE (Personal Protective Equipment) required for various tasks., • Must be able to work remotely and also be able to travel with all tools to multiple locations., • Serve as a resource to production staff in all departments in multiple facilities., • Support company efforts to develop and maintain positive Employee Relations. SUPERVISORY RESPONSIBILITIES: Responsible for training and supervising the mechatronics/controls technician apprentice(s). Will occasionally train and supervise seasonal interns. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: • Associates of Applied Science from accredited college in Electronics Engineering or Computer Science with emphasis on Programming or equivalent experience and certifications., • 10+ years direct experience in industrial automation., • Certification in programming preferred, such as Siemens or Allen Bradley certified programmer., • State issued electrical trades license preferred., • Proficient in AutoCAD Electrical (Preferred) LANGUAGE SKILLS: • Read, analyze, and interpret blueprints, mechanical and electrical schematics, and machine drawings., • Read, analyze, and interpret programming code documented in languages other than English., • Read, analyze, and interpret common scientific/technical journals, regulatory documentation, and legal documents., • Must be able to give clear and easy to understand written instructions., • Must be able to create easy to understand operating procedures. MATHEMATICAL SKILLS: • Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and/or permutations., • Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis., • Ability to code advanced mathematical concepts such as exponents, logarithms, quadratic equations, and/or permutations. REASONING ABILITY: • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Proven ability to interpret programming logic. OTHER SKILLS and ABILITIES: • Organized and able to archive all necessary documents, drawings, and information., • Eagerness to grow this position., • Exceptional interpersonal skills to effectively communicate with employees, colleagues, and Upper Management., • Hard-working and driven with the proven ability to work independently without supervision., • Ability to work in a team environment where all members are expected to contribute., • Strong understanding of the NFPA 70 International Electric Code. PHYSICAL DEMANDS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to stand., • The employee is regularly required to walk, sit, reach with hands and arms, climb or balance, and stoop, kneel, or crouch., • The employee will occasionally climb to heights in excess of 60 feet from ground level., • The employee must regularly lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, color vision, peripheral vision, and depth perception. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to fumes, airborne particles or electrical hazards., • The employee is frequently exposed to extreme heat and sometimes must work in cold/freezing temperatures., • The employee works in high, precarious places, outside weather conditions, occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, and vibrations., • The noise level in the work environment is usually loud. Under the direction of the Production Supervisor supports department efforts to assure continuous operation of product manufacturing by performing the following duties personally or through department production employees. ESSENTIAL DUTIES AND RESPONSIBILITIES Producing first quality sheets on the presses. Filling and leveling the molds with resin. Accurately filling out production reports. Thoroughly clean molds and cover plates. Housekeeping to include presses, press area, the and vacuum system. All shall be cleaned daily and kept clean throughout shift. Remove out of spec material and place in designated area. Proper and safe operation of equipment. Press change times should be held to a minimum. Remain in work area. Leave area only at break time. Clean press pits per Production Supervisors schedule. Report all problems/challenges with equipment or quality of product to leadman or Production Supervisor immediately. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS: Valid drivers license. OTHER SKILLS and ABILITIES: The employee is required to be able to operate a forklift, scales, and department production equipment. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee frequently is required to walk, and talk or hear. The employee is occasionally required to climb and balance and stoop, kneel, crouch, or crawl. PHYSICAL DEMANDS (continued): The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and color vision.

SUMMARY: Providing technical and engineering support for automated industrial machinery and industrial electronic controls. ESSENTIAL DUTIES AND RESPONSIBILITIES Other duties may be assigned. • Read, create, and modify electrical schematics according to IEC and NFPA standards., • Read, create, and modify fluid power (hydraulics and pneumatics) schematics according to IEC and NFPA standards., • Read, create, and modify P&ID schematics according to IEC and NFPA standards., • Read, create, and modify programming code in the following languages: Siemens Structured Control Language (SCL), Siemens Statement List, Siemens Graph 7, Siemens Function Block Diagram (FBD), Ladder Logic (Siemens, Allen Bradley and others), Allen Bradley Structured Text, Microsoft Visual Basic, C++, C#, Java, Python, Microsoft SQL, and others., • Read, create, and modify database tables in MSSQL server., • Read, create, and modify HMI programs for Siemens, Allen Bradley, and other HMIs, this includes using WinCC Flex and Panel Builder 32., • Read, create, and modify SCADA programs for Siemens WinCC, and Inductive Automation., • Install, commission, repair and troubleshoot any brand of PLC, HMI or VFD., • Install, commission, repair and troubleshoot any industrial communications media and protocols., • Install, commission, repair and troubleshoot a wide range of industrial machinery., • Upgrade and retrofit controls that are obsolete with no direct replacements available. This requires making all necessary modifications to existing equipment., • Possess exemplary troubleshooting skills and be able to repair any machinery from any manufacturer., • Properly use oscilloscopes, test meters, megohmmeters, process calibrators, thermal imagers, vibrations analyzers, data loggers and any other test equipment., • Sources all necessary materials for projects and repairs and works with maintenance inventory clerk to acquire needed materials in timely manner., • Train technicians and apprentices the proper methods and procedures for process instrumentation calibration., • Train technicians and apprentices how to read and understand programming code and logic., • Train technicians and apprentices the best practices and methods of troubleshooting components of electrical controls systems., • Train technicians and apprentices about fluid power systems, and how to troubleshoot and repair these systems., • Must be able to perform all duties with minimal outside support., • Ensure all work is performed and executed safely. Must identify and correctly use appropriate PPE (Personal Protective Equipment) required for various tasks., • Must be able to work remotely and also be able to travel with all tools to multiple locations., • Serve as a resource to production staff in all departments in multiple facilities., • Support company efforts to develop and maintain positive Employee Relations. SUPERVISORY RESPONSIBILITIES: Responsible for training and supervising the mechatronics/controls technician apprentice(s). Will occasionally train and supervise seasonal interns. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: • Associates of Applied Science from accredited college in Electronics Engineering or Computer Science with emphasis on Programming or equivalent experience and certifications., • 10+ years direct experience in industrial automation., • Certification in programming preferred, such as Siemens or Allen Bradley certified programmer., • State issued electrical trades license preferred., • Proficient in AutoCAD Electrical (Preferred) LANGUAGE SKILLS: • Read, analyze, and interpret blueprints, mechanical and electrical schematics, and machine drawings., • Read, analyze, and interpret programming code documented in languages other than English., • Read, analyze, and interpret common scientific/technical journals, regulatory documentation, and legal documents., • Must be able to give clear and easy to understand written instructions., • Must be able to create easy to understand operating procedures. MATHEMATICAL SKILLS: • Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, and/or permutations., • Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis., • Ability to code advanced mathematical concepts such as exponents, logarithms, quadratic equations, and/or permutations. REASONING ABILITY: • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Proven ability to interpret programming logic OTHER SKILLS and ABILITIES: • Organized and able to archive all necessary documents, drawings, and information., • Eagerness to grow this position., • Exceptional interpersonal skills to effectively communicate with employees, colleagues, and Upper Management., • Hard-working and driven with the proven ability to work independently without supervision., • Ability to work in a team environment where all members are expected to contribute., • Strong understanding of the NFPA 70 International Electric Code. PHYSICAL DEMANDS: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the employee is regularly required to stand., • The employee is regularly required to walk, sit, reach with hands and arms, climb or balance, and stoop, kneel, or crouch., • The employee will occasionally climb to heights in excess of 60 feet from ground level., • The employee must regularly lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, color vision, peripheral vision, and depth perception

Job DescriptionDescription: Position Summary We are seeking a Maintenance Technician to keep our facilities operating at peak performance. This position is the backbone of our day-to-day physical environment, ensuring that every system, space, and piece of equipment supports the high-energy, patient-centered work that drives our mission. The role sits within Facilities / Operations, ensuring alignment with organizational goals, operational excellence, and compliance standards. The ideal candidate is self-directed, technically versatile, and takes real pride in a well-run facility. They notice issues before they become problems, communicate clearly, and understand that a safe, functional environment is integral to Gifthealth’s ability to deliver for prescribers, patients, and partners. Key Responsibilities • Preventive Maintenance: Perform scheduled maintenance on HVAC systems, plumbing, electrical systems, lighting, and mechanical equipment to minimize downtime and extend asset life., • Reactive Repairs: Respond promptly to facility work orders, diagnosing and resolving issues across a range of trades including carpentry, drywall, painting, plumbing, and electrical., • Inspections & Compliance: Conduct routine safety inspections, identify code or compliance concerns, and escalate issues that require licensed contractor involvement., • Vendor Coordination: Assist in coordinating and supervising third-party contractors and service vendors for specialized work, ensuring quality and timeliness., • Inventory & Supplies: Maintain an organized inventory of tools, parts, and supplies; manage reorders and track maintenance materials., • Documentation: Log maintenance activities, work orders, and inspection results in the facilities management system accurately and on time., • Emergency Response: Be available for on-call emergency maintenance situations as needed, including after-hours response for urgent facility issues., • Continuous Improvement: Identify opportunities to improve facility operations, energy efficiency, or maintenance workflows and bring recommendations to the Facilities Manager.Qualifications, • Education: High school diploma or GED required; vocational or technical training in a skilled trade preferred., • Licensure/Certification: EPA 608, HVAC/R certification, OSHA 10 or OSHA 30 preferred. Electrical journeyman or plumbing apprentice credentials a plus., • Experience: 2+ years of experience in maintenance, facilities management, or skilled trades., • Ability to safely operate ladders, scissor lifts, aerial work platforms, and other facility maintenance equipment as required to perform maintenance and repair activities at elevated heights., • Skills:, • Working knowledge of HVAC, plumbing, electrical, and mechanical systems, • Ability to read and interpret technical manuals, schematics, and blueprints, • Strong troubleshooting and root-cause analysis skills, • Ability to lift up to 50 lbs, work at heights, and perform tasks in varied environmental conditions, • Preferred: Experience with CMMS platforms (e.g., UpKeep, Hippo, ServiceNow) and familiarity with healthcare or regulated facility environments, • Strong understanding of facility safety standards, building codes, and preventive maintenance best practicesDesired Attributes, • Self-directed and proactive: notices issues before they are reported and takes ownership of the facility environment, • Technically versatile: comfortable working across multiple trades rather than specializing in just one area, • Mission-minded: understands that a safe, functional facility is foundational to patient care and operational excellence, • Clear communicator: keeps stakeholders informed on work order status, timelines, and any issues requiring escalationWork Environment, • Location: On-site (variable locations), • Schedule: Full-time; standard business hours with on-call availability for emergencies, • May require availability during evenings, weekends, or off-hours for urgent facility issues or on-call emergencies., • Regular coordination with the Facilities Manager, Operations team, and third-party contractors to ensure facility alignment.Key Essential Functions, • Must be able to stand for extended periods (4+ hours at a time) while performing maintenance tasks, • Must be able to lift up to 50 pounds regularly and up to 75 pounds with assistance, • Must perform repetitive motions throughout a shift: bending, kneeling, reaching, lifting, and climbing, • Must be able to work onsite for all shifts; must be able to work at heights using ladders, lifts, or scaffolding and in confined spaces such as attics, crawl spaces, and mechanical rooms, • Must be able to work onsite for all shifts; must be able to work at heights using ladders, scissor lifts, aerial work platforms, lifts, or scaffolding and in confined spaces such as attics, crawl spaces, and mechanical rooms.Employment Classification Status: Full-time FLSA: Non-Exempt Equal Employment Opportunity (EEO) Statement Gifthealth is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind. All employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, transgender status, national origin, age, disability, veteran status, or any other legally protected status. Disclaimer This job description is intended to describe the general nature and level of work being performed. It is not intended to be an exhaustive list of all responsibilities, duties, or skills required of personnel.Gifthealth reserves the right to modify job duties or descriptions at any time. Requirements:

Job DescriptionDescription: The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grown into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business – not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that’s just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity?, 2. Does the idea of autonomy and independence excite me?, 3. Can I have fun, while keeping it safe and efficient?, 4. Am I looking for a career family and not just a job?, 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. • Apprentice Level (Level I) – best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed., • Service Professional Level (Level II) – this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field., • Senior Level (Level III) – possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field., • Expert Level (Level IV) – are the masters of their craft, skilled in electrical and hydraulic troubleshooting with a mechanical mindset, leadership skills and extensive knowledge in dock leveler and door repairs. Candidates will possess at least 8 years of experience. We encourage you to apply no matter your experience level. If you know where your skills would be best suited feel free to call them out on your resume or application (help us in our review, so we can help you). If you aren’t sure what level would best suit your experience, apply, and let Miner guide you! What You’ll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn’t have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements: What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: • 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers., • Ability to repair industrial facilities, including doors, loading docks, and dock-leveler’s., • Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you!, • Ability to take direction and work independently while on the road for hours each day., • Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must., • Technical school training and OEM certifications are desired but not required., • Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need., • A clean driving record and a valid Driver’s License for the state of employment is required. What’s In It For You We thought you’d never ask. Link to benefits overview: Benefits In addition to our benefits, Service Professionals can look forward to: • Competitive pay, including incentives, • Uniform and boot allowance, • Training and the opportunity for growth, • Company issued truck for work travel, • Autonomy and independence, • Competitive PTO and Paid Holidays, • Full benefits package starting day one – includes medical, dental, vision, 401k, and much more If you’ve read through and believe you would make an impact as a Service Professional at Miner, we invite you to apply now and look forward to welcoming you as a guest of our career family! Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. Be aware that job postings on external job boards may not be authorized by OnPoint Group and may contain inaccurate or incomplete information. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Applicants should refer to OnPoint Group’s Careers Page for the most accurate job posting and reach out to the Company with any questions about a job posting. Salary Range The pay range noted represents the company’s good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay.

Overview Description Tradesmen International is immediately hiring experienced Apprentice Electricians for projects located in Columbus, OH. Recruiter Arlandis White Location US-OH-COLUMBUS Posted Date Posted 3 days ago (9/5/2025 12:09 PM) Other Req ID 2025-363892 Category Electrical - Low Voltage T

SUMMARY Mortenson is currently seeking an Electrical Apprentice I that will assist with utility-scale projects, ensuring safety and compliance with electrical regulations while training under a journey-level electrician. Lift, position, and fasten objects Prepare, handle, and supply materials and t