Electrical design engineer jobs in Torrance, California - Page 3Create job alerts

Job DescriptionAbout Radiant Radiant is an El Segundo, CA-based startup building the world’s first mass-produced, portable nuclear microreactors. The company’s first reactor, Kaleidos, is a 1-megawatt, fail-safe microreactor that can be transported anywhere power is needed and run for up to 5 years without refueling. Portable nuclear power with rapid-deploy capability can replace similar-sized diesel generators and provide critical asset support for hospitals, data centers, remote sites, and military bases. Radiant’s unique, practical approach to nuclear development leverages modern software engineering to rapidly deliver safe, factory-built microreactors that use existing, well-qualified materials. Founded in 2020, Radiant is on track to test its first reactor at the Idaho National Laboratory this summer, with initial customer deliveries beginning in 2028. About the Role Radiant is seeking a Senior Electrical Engineer with a strong focus on PCB design to lead the electrical architecture for terrestrial reactor control systems, with a long-term path toward space reactor applications. You will serve as the technical authority for custom hardware, owning the design and development of high-reliability, low-noise printed circuit boards - from requirements definition and schematic capture through layout, bring-up, validation, and field deployment. This role emphasizes full-stack PCB development, including mixed-signal design, high-speed interfaces, power distribution, and signal integrity, while supporting data acquisition, signal conditioning, estimation, and real-time processing functions critical to reactor control. Responsibilities and Duties * Own the design and development of multilayer PCBs for reactor control and instrumentation systems (terrestrial, with future space applications). * Define electrical architecture for mixed-signal systems, including power distribution, analog front ends, and digital control interfaces. * Design low-noise analog front-end circuits and ensure robust integration with ADC/DAC and digital subsystems. * Perform schematic capture, component selection, and PCB layout with focus on signal integrity, power integrity, grounding, and EMI/EMC mitigation. * Develop and review high-speed, high-precision layouts (e.g., sensor interfaces, data-acquisition paths, communication buses). * Bring up, debug, and validate hardware, including board-level testing, instrumentation, and root-cause analysis. * Create and execute hardware validation and qualification test plans for performance, reliability, and environmental conditions. * Collaborate cross-functionally with firmware, FPGA, DSP, and responsible engineers to ensure seamless hardware/software integration. Required Qualifications and Skills * Bachelor’s degree in Electrical Engineering or a related field. * 5+ years of experience designing custom PCBs, including multilayer and mixed-signal boards. * Strong experience with schematic capture and PCB layout tools (e.g., Altium, Cadence, or similar). * Solid understanding of signal integrity, power integrity, grounding strategies, and EMI/EMC mitigation techniques. * Experience with analog and mixed-signal design, including sensor interfaces, ADC/DAC integration, and low-noise design practices. * Familiarity with high-speed interfaces (e.g., SPI, I2C, UART, Ethernet) and layout constraints. * Hands-on experience with board bring-up, debugging, and lab instrumentation (oscilloscopes, spectrum analyzers, VNAs, etc.). * Ability to work across disciplines and support system integration in a complex engineering environment. Desired Qualifications and Skills * Master’s degree in Electrical Engineering or a related field. * Experience designing for high-reliability or harsh environments (nuclear, aerospace, defense, or industrial). * Familiarity with radiation effects and radiation-tolerant electronics design. * Experience with power electronics or power distribution design. * Exposure to FPGA or embedded systems to support hardware/software co-design. * Familiarity with nuclear instrumentation or detector interface electronics. * Experience with design for manufacturability (DFM), design for test (DFT), and production bring-up. Additional Requirements * Must be willing to work extended hours and weekends as necessary to accomplish our mission * Must work 100% onsite at El Segundo HQ Benefits and Perks * Stock: Substantial incentive stock plan for all full-time employees. * Medical: 100% up to base silver level plan for employee + 50% dependents, offers up to Platinum plans. * One Medical: Sponsored memberships for employees and their dependents. * Vision: 100% top tier plan coverage + 50% for dependents. * Dental: 100% top tier plan coverage, orthodontia extra, 50% for dependents. * Voluntary life, accident, hospital, critical illness, commuter and FSA/HSA are offered as employee contributed benefits. * 8-weeks of paid parental leave for all parents. Additional paid pregnancy leave for CA employees. * Daily catered lunch. Free snacks and drinks. * Flexible PTO policy. Remote workday allocation. * Company and team-bonding events, happy hours and in-person camaraderie. * Beautiful El Segundo headquarters close to the Pacific Ocean. Total Compensation and Benefits Radiant compensates people for impact and invests in those who continue to raise the bar. Radiant’s new hire compensation package includes base salary, substantial equity grants, and comprehensive health benefits. Total compensation and level are determined through a rigorous evaluation of interview performance, experience, education, and qualifications, and are designed to support continued growth as scope, responsibility, and impact expand at Radiant. The best of today’s advanced reactor builders don’t wait for job postings. They join the winning team. If that’s you, contact us directly for immediate opportunities: . We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Unfortunately, we are unable to provide visa sponsorship at this time. This position involves access to technology that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls. Compensation Range: $158,000 - $219,450

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose The Senior Supplier Quality & Development Engineer is a hybrid role that combines the proactive, strategic focus of supplier development with the technical rigor and oversight of supplier quality engineering. This position is responsible for building, improving, and sustaining a high-performing supplier base while ensuring all supplied materials, components, and services meet or exceed stringent quality standards. The role is pivotal in driving supplier excellence, supporting new product introductions, and ensuring continuous improvement. The Role • Serve as a liaison between production and procurement operations, suppliers, and customers to ensure all purchased products meet specifications, quality, and regulatory requirements, • Develop, maintain, and continuously improve supplier quality manuals, procedures, production processes, engineering specifications, and inspection plans, • Interpret and communicate customer requirements to suppliers, ensuring accurate and thorough flow down through purchase orders, • Conduct supplier quality audits and source inspections to verify adherence to standards and contractual requirements, • Lead initiatives to identify root causes of supplier issues and implement effective corrective actions, driving improvements in key metrics such as On-Time Delivery (OTD), scrap, rework, and repair costs, • Oversee containment efforts for defects in procured parts, ensuring robust root cause corrective action (RCCA) processes are implemented to prevent recurrence, • Analyze and resolve issues related to supplier components, assemblies, and materials, collaborating with cross-functional engineering teams, • Participate in Material Review Board (MRB) activities to address supplier-originating nonconformances, • Evaluate supplier capabilities and performance through data analysis, site assessments, and tooling validation, • Track and analyze supplier key performance metrics such as OEE, cost, and capability to identify trends and drive improvements in quality, productivity, and cost efficiency, • Develop and lead training programs for quality control (QC) and buyers team members, fostering expertise in advanced problem solving, Lean concepts, and best practices, • Willingness and ability to travel up to 50% to support supplier development, audits, and issue resolution activities Role Specialization – Additive Manufacturing & Components • Lead supplier quality and development activities for equipment and printer component suppliers, including contract manufacturers, electrical systems, robotic systems, automated assembly equipment, tooling, thermal processing, HVAC systems, and other advanced manufacturing assets, • Support equipment sourcing and qualification through supplier capability assessments, factory acceptance tests (FAT), site acceptance tests (SAT), and commissioning activities, • Ensure equipment suppliers meet technical, quality, safety, and regulatory requirements throughout the equipment lifecycle, from design and build through installation and production ramp, • Drive corrective actions and continuous improvement initiatives with equipment suppliers related to reliability, uptime, maintainability, safety, and performance, • Partner with manufacturing, facilities, automation, and maintenance teams to resolve supplier-related equipment issues and optimize long-term equipment performance Basic Qualifications • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's degree in Engineering, Quality Management, or a related field, • Minimum of 7–8 years of progressive experience in supplier quality engineering or a closely related discipline, • Demonstrated expertise in Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), and Failure Mode and Effect Analysis (FMEA), • Strong technical knowledge of automotive component design, manufacturing processes, safety and test requirements, and appearance approval procedures, • Proficient in Geometric Dimensioning and Tolerancing (GD&T) and datum structures, • Comprehensive understanding of IATF 16949:2016, ISO 14001, and relevant regulatory standards, • Proficiency in quality tools and methodologies such as Six Sigma and Lean Manufacturing, • Exceptional problem solving and root cause analysis skills for addressing quality issues, non-conformities, and defects, • Proven ability to conduct supplier quality management system audits and drive supplier improvement initiatives, • Proficient in Microsoft Office Suite, including Excel, Word, Outlook, • Familiarity with ERP/MRP systems (e.g., SAP, Oracle, Plex), supplier portals, and compliance tracking tools, • Demonstrated ethical conduct and integrity in all supplier interactions, • Willingness and ability to travel up to 50% to support supplier development, audits, and issue resolution activities Preferred Qualifications • Proven experience managing supplier quality for capital equipment in advanced manufacturing settings, including automated production lines, robotics, CNC machining, and facility systems, • Familiarity with equipment qualification methodologies, including Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), commissioning, and long-term supplier performance monitoring, • In-depth knowledge of aerospace quality standards, including AS9100 and NADCAP, with demonstrated familiarity in industry-specific regulations and certification requirements, • Master's degree in Engineering or a closely related technical discipline, reflecting advanced technical expertise and leadership capabilities, • Deep understanding of Design for Manufacturing (DFM) principles, with a proven ability to deliver actionable feedback to design engineering teams to optimize manufacturability, quality, and cost, • Strong ability to develop and utilize cost models for multiple commodities, enabling effective achievement of target costs and informed sourcing decisions Work Environment • Sr. Engineer/E05: $128,520 - $176,720, • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal Power Electronics Engineer I (2025538) to join our growing spacecraft payload development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for satellites and space power systems payloads—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. DUTIES AND RESPONSIBILITIES * Define electrical power system architecture, and derive power subsystem requirements * Design DC-DC power converters, motor drives, inverters, power management and control circuits from concept to production release * Perform detailed design for low to high complexity analog and power electronics circuits ranging from single DC-DC power converters to multi-output power supply modules * Perform modeling and analysis of analog and power electronics designs including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis * Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supply designs * Lead board bring-up and design verification testing of power electronics circuits and modules * Lead system integration, qualification campaigns, and release of analog and power electronics designs into production * Mentor younger engineers and foster knowledge sharing * Lead a small team of power electronics engineers to drive project execution * Perform research and monitor power electronics industry trends to drive innovation and generate intellectual property in this area REQUIREMENTS AND MINIMUM QUALIFICATIONS * Bachelor of Science (BS) degree or higher in Electrical Engineering (or related) from an accredited university. * Minimum of 9 years of experience designing analog and power electronics * Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks * Experience with modeling and control of DC-DC converters and power stage design of different isolated and non-isolated DC-DC power converters (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward, Half-bridge, Full bridge, and Resonant converters) * Experience designing custom signal and power magnetics, and power filters for low noise and electromagnetic compatibility (EMC) * Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans * Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies * Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators * Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition * Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx * Excellent written and verbal communication skills PREFERRED EXPERIENCE * Master of Science or PhD in Electrical Engineering with research focus in power electronics * Experience designing high-reliability analog and power electronics for automotive, space or defense applications * Knowledge of space radiation environments and radiation effects in electronics * Experience in power electronics applications utilizing GaN or SiC wide bandgap power semiconductor devices * Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx * Experience with soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.) * Experience with power stage design for inverters and motor drives * Knowledge of modeling and control of inverters and motor drives * Experience with advanced control schemes for DC-DC power converters (e.g. voltage mode with feedforward control, constant on-time control, V2 constant on-time control, phase shift modulation, average current mode control) * Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics * Programming skills to support hardware test and data processing (Python, MATLAB, etc.) * Knowledge of maximum power point tracking (MPPT) for solar power applications, battery sizing and battery management systems, power conversion for electric propulsion systems, power conditioning, power management, and power distribution units for spacecraft technology * Experience designing and testing power electronics units to meet industry standards and requirements in the automotive, industrial, space or military markets (e.g., FCC, CISPR, UL safety, ECSS, NASA, MIL standards) CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate’s work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior FPGA Engineer II - Networking to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA designs and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in board-level hardware design is also desirable. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • Minimum of 6 years of industry or university research experience in the design, analysis, and implementation of FPGA systems., • Production experience in design, implementation, and integration of OSI Layers 2 and 3 networking systems, including protocols such as Ethernet, IP, and MPLS., • Experience in networking system design, especially in determining throughput and memory requirements., • Expertise in writing and reviewing VHDL., • Proficiency in writing and reviewing SystemVerilog for block and system verification., • Expertise in FPGA design and verification tools for modern complex FPGA and SoC platforms such as Xilinx Vivado and Siemens Questa., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Deep understanding of network design and an ability to derive requirements based on high-level objectives., • Familiarity with non-FPGA networking platforms including ASICs and general-purpose processors., • Aerospace design and qualification., • Worst-case analysis, failure method and criticality analyses, and reliability analysis., • Experience with board-level hardware design., • Familiarity with communications systems, such as digital signal processing.

Job DescriptionAbout Epirus Epirus is a high-growth technology company developing solid-state, software-defined directed energy systems that enable unprecedented counter-electronics effects and power management solutions to optimize power efficiency in defense and commercial applications. With a constant emphasis on innovation, we are redefining the future of power to bring tomorrow's capabilities to life, today. And that's just the beginning. Job Summary: Epirus is seeking a Field Service Engineer (FSE) III with the ability to provide advanced technical support, troubleshooting, and operational oversight in support of Epirus High Power Microwave Counter Unmanned Aerial Systems (HPM-CUAS). This individual will work as a member of a small team with a primary focus on the maintenance, training support and sustainment of fielded HPM assets. The FSE will directly support the maintenance of the fielded HPM-CUAS equipment, re-installation of Line repairable units (LRUs), training, integration, and sustainment of these solutions with existing client infrastructure at CONUS and OCONUS locations. Candidate will provide hands-on support for HPM-CUAS technical, network, and integration projects. This role requires hands-on expertise in electrical, mechanical, and software systems, as well as the ability to work in high-pressure situations supporting defense operations. This position requires a high degree of technical skill, personal resilience and flexibility, strong interpersonal skills, and the ability to work as part of a cross-functional team in a variety of physical environments. Responsibilities: • Work closely with engineering teams to provide feedback on system performance and potential design improvements., • Coordinate with project managers, logistics personnel, and customers to ensure timely resolution of issues., • Conduct install/uninstall of HPM-CUAS systems in a variety of locations / environmental conditions to support client operations, test and evaluations, Tactics, Techniques and Procedure (TTP) / Doctrine development, and New Equipment Training (NET) courses., • Make recommendations on equipment modifications/upgrades based on experience gained through testing and operational use of HPM-CUAS systems., • Deploy overseas locations to perform technical inspections, system checks, fault diagnosis, identify cause of failures, and replace Line Repairable Unit (LRU), test and restore HPM-CUAS systems to full functionality., • Conduct advanced programming of HPM-CUAS systems (install/upgrade firmware, software upgrades, etc.)., • Work with the Epirus training and enablement team to develop and conduct training on the proper care, use, maintenance, and preventive maintenance of systems., • Work closely with engineering teams to provide feedback on system performance and potential design improvements.Basic Qualifications:, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Physics, or a related technical field AND minimum 5 years of related experience (or 3 years and a Master's degree)., • Proficiency in troubleshooting and repair of electronic and mechanical systems., • Knowledge of high-power RF generation, wave propagation, and directed energy principles., • Familiarity with test equipment (oscilloscopes, spectrum analyzers, RF power meters, etc.)., • Strong technical writing and verbal communication skills., • Ability to provide technical advice and guidance on installation, adaptation, configuration and/or enhancement of company technical products, programs, and systems., • Candidate must hold a valid U.S. passport or have the ability to obtain a U.S. passport., • Military experience with CUAS Systems (RF Detection, Radar, EO/ IR Optical systems, Command and Control (C2) Systems., • Experience working in field operations, including deployment in austere or challenging environments., • Experience working independently or as a team member to solve project and/or engineering problems., • Ability to use and communicate a wide variety of technical data from OEM manuals, engineering drawings, etc. to engineers as well as to non-technical system end users., • The position requires daily interaction with customers at multiple levels., • Candidate must possess and use a high degree of tact and interpersonal communication skills in daily interactions with team members, clients, vendors, and end users., • This position requires the ability to obtain and maintain a SECRET security clearance, which is issued by the U.S. government. U.S citizenship is required to obtain a security clearancePreferred Skills and Experience:, • Previous experience with HPM or other directed energy systems., • Certification in RF safety or related disciplines., • Military background or experience working with defense contractors., • Routine manual lifting of objects 50-80 pounds such as boxes and other equipment. Perform work in unusual and sometimes difficult positions such as climbing ladders; high lift equipment up to 40 feet, crawl spaces, above ceilings, etc. Manual dexterity required for frequent reaching, climbing, and lifting of moderate objects, operation of power and manual tools/equipment, and operating office equipment., • Typical overseas assignments are frequently performed in both internal and external environments with a variety of weather conditions. Ability to work under extreme hot or cold weather conditions with exposure to dust or dirt is routine and may require the use of protective personal equipment (PPE)., • This position will require overseas travel. Candidates should be willing to be on travel / TDY away from their home location 90 – 120-day durations, in hazardous duty locations., • FAA Part 107 certification ITAR REQUIREMENTS: • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. People are the most important part of Epirus – and always come first. We don't believe in the word impossible and are always asking "why not" as work to usher in a new paradigm of power efficiency. Our fast-growing team is agile, creative, and innovative. We support a culture of constant learning and sense of belonging among our team members and know that mentorship matters. We embrace diversity, equity, and inclusion in the workplace and beyond. To deliver on our mission, we are always looking for problem solvers, changemakers and innovators to join our fast-growing team. As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $98,700—$119,800 USD

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior FPGA Engineer II to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA circuits and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in digital signal processing or board-level hardware design is also desirable. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • Minimum of 6 years of industry or university research experience in the design, analysis, and implementation of FPGA systems at the HDL level., • Expertise in FPGA design and verification (Verilog/VHDL, HDL coder, Xilinx’s Vivado, Modelsim, etc.)., • Hands-on experience with lab instruments such as digital oscilloscopes, spectrum analyzers, RF signal generators, and vector signal analyzers., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Aerospace design and qualification., • Worst-case analysis, failure method and criticality analyses, and reliability analysis., • Experience with board-level hardware design.

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The Chief Systems Engineer at Space Kinetic will be a highly experienced and visionary engineering professional with extensive experience in successfully leading complex space programs from concept to mission operations and have demonstrated technical excellence in space system mission design and supporting development of space hardware from System Concept, System Requirements to Technology Readiness Level 9. This is a critical leadership role responsible for providing critical mission planning, requirements definition, technical oversight and supporting all engineering and programmatic functions within the company in a fast-paced start-up agile environment. The Chief Systems Engineer will develop and execute the overall payload mission, engineering, and production requirements in line with the company's goals and objectives. Core Responsibilities: 1. Overall Technical Authority • Leads the space system's architecture and major design decisions, • Balances performance, SWaP-C (Size, Weight, Power and Cost), and risk, • Signs off on design maturity and readiness at every review (PDR, CDR, TRR, etc.) 2. Systems Engineering Leadership • Ensures all subsystems (GNC, power, comms, propulsion, structures, thermal, avionics, software, payload, etc.) integrate correctly, • Owns system requirements: flow-down, allocation, verification, validation 3. Mission Performance & Safety • Ensures the Space Kinetic system meets mission performance (pointing, power budget, data throughput, lifetime, survivability), • Oversee environmental qualification (vibration, shock, TVAC, EMI, radiation considerations) What It Takes: • B.S. in Aerospace Engineering, Mechanical or Electrical Engineering, Computer Science, or related field, • 7+ years of experience in leadership positions of satellite systems development, integration, and operation., • Ability and willingness to obtain a security clearance, • Master's degree or PhD in Aerospace Engineering, Mechanical or Electrical Engineering, Computer Science, Systems Engineering, or a related field., • Ability to work in a fast paced, autonomously driven, and demanding startup atmosphere, • Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$150,000—$230,000 USD

Job DescriptionDescriptionAs an RF Test Engineer, your core responsibility will be to own the design, bring up, and implementation of test fixtures and software for Impulse Space’s wireless products. You will work with RF engineers, RF software engineers, mechanical engineers, and others to meet test needs across a wide range of capabilities. You may work on uplink and downlink radios up to 32GHz, GNSS receivers, desense testing, and coexistence testing. Responsibilities • Work with a cross-disciplinary team to define and implement RF test requirements, implement RF test software architecture, and design and build RF test hardware fixtures., • Implement scripts to control RF test equipment including spectrum analyzers, network analyzers, antenna test infrastructure, power meters, power supplies, and other devices., • Design and implement fixtures to test design compatibility with GNSS constellations and ground station infrastructure, • Work with hardware and software engineers to prepare testing for radiation and ground station test programs, • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related technical field, • Experience writing scripts for wireless systems or hardware testing infrastructure, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, and software defined radios, • Proficient in testing and troubleshooting RF devices, • 2+ years experience writing Python, LabView, TILE, or other test software, • Strong understanding of RF system parameters such as channel power, EVM, modulation, and bandwidth, • Experience writing and documenting RF test procedures for use by other engineers and technicians, • Experience testing and troubleshooting microcontrollers and/or FPGA's, • Familiarity working with embedded Linux, • Experience with common RF protocols like SRS4, DVBS-II, and CCSDS, • Experience with GNU radio flowgraph development and troubleshooting, • Familiarity with satellite spectrum licensing laws, agencies, and standards, • Experience testing RF devices for regulatory compliance, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionAbout Us At Arbor Energy & Resources Corporation ("Arbor Energy"), we're creating technology to power our lives while protecting the planet that sustains them. Our advanced power systems deliver clean, reliable baseload electricity with zero operating emissions—modular, fuel-flexible, and engineered for the realities of today's energy demand. At the core is a supercritical CO₂ turbine with integrated carbon capture, designed to bring carbon-neutral power online quickly at meaningful scale. Our team includes aerospace engineers, combustion experts, and systems thinkers with a shared goal: to build technology worthy of the world we want to live in. While many of us began our journeys looking to the stars, we're applying that expertise here at home to deliver dependable, emission-free baseload power and a future of lasting abundance. If you share our values and are drawn to rigorous work with lasting impact, we'd love to learn more about you. Come build what the future will run on. Steward our planet: We build for tomorrow, ensuring every bolt we tighten and every hand we lend leaves our environment stronger than we found it. Lead with Love: We champion the success of our people, partners, and planet, nurturing excellence through camaraderie and rigor. Explore the Uncharted: We embrace the unknown with curiosity, using courage and discipline to transform uncertainty into opportunity. Role Overview We are seeking a Test Engineer to develop, execute, and oversee testing procedures and test stand hardware to test complex fluid, mechanical and electrical systems. This role involves designing test plans, analyzing performance data, building and troubleshooting test stand fluids and instrumentation systems, and ensuring compliance with safety and quality standards. The ideal candidate has experience in test automation, data acquisition, and working with high-energy or hazardous systems. This position requires on-site work with up to 40% travel to local test facilities. Responsibilities • Collaborate with design engineers to develop and implement test plans for fluid, electrical, and control systems., • Oversee test execution, analyze data, and troubleshoot system performance issues., • Design and maintain test fluid systems, fixtures, and instrumentation., • Ensure compliance with safety regulations and industry standards., • Develop and maintain procedures for test site operation and management.Requirements, • Bachelor's degree in Mechanical, Electrical, Aerospace, or a related engineering field., • 3+ years of experience in system testing, validation, or a related field., • Experience with high-pressure gas systems., • Strong troubleshooting and problem-solving skills., • Familiarity with test instrumentation and sensor integration., • Proficiency in analyzing test data and generating reports.Preferred Qualifications, • Experience testing high-energy or hazardous systems (high voltage, high pressure, etc.)., • Experience with data acquisition and test automation systems., • Knowledge of LabVIEW, Python, MATLAB, or similar for test automation., • Experience working with PLCs, control systems, and industrial sensors., • Familiarity with industry standards such as API, ASME, IEEE, or MIL-STD., • Experience in a fast-paced startup or R&D environment.Compensation & Benefits, • Pre-IPO stock options, • Medical, dental, and vision insurance (Arbor covers 90% for employees), • Basic life insurance fully covered, • Health savings account (HSA) with matching, • Flexible savings account (FSA), • Unlimited PTO, • 12+ company holidays, including Earth Day!, • 401(k), • Commuter benefits, • Annual learning and development stipend Our hiring process is designed to be accessible, fair, and focused on the work that matters most for this role. Reasonable accommodations are available throughout the hiring process and employment—please let us know if you need one.

Job Description About Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job Summary: This is an exciting Principal Product Quality Engineer role with an innovative, high-growth defense technology company. The ideal candidate for the position is an agile, collaborative, and hands-on leader who thrives in fast-paced environments and can balance technical rigor with agility to support growth initiatives. As an external and internal facing leader, you are a skilled communicator who can translate Epirus' quality expectations to all parties with a hands-on approach to problem solving and process improvement. This role will serve as the technical authority for product quality partnering closely with design, manufacturing, supply chain, and program management to ensure robust, reliable, and mission-ready products. You will architect and implement scalable quality systems, drive risk-based decision making, and embed quality into the product lifecycle focusing on new product development, design assurance, and reliability. Responsibilities: New Product Introduction (NPI) • Lead quality planning and execution for NPI programs from concept through production ramp, • Establish and deploy advanced quality mechanisms in the product development process to drive production readiness, • Drive and support implementation of design reviews, process readiness reviews, and production readiness gates, • Ensure effective transfer from engineering to manufacturing with robust control plans, • Own and drive Design for Quality (DfQ) principles across engineering teams, • Support and implement risk management activities including DFMEA, PFMEA, and hazard analyses, • Ensure requirements are traceable to applicable customer, program and industry requirements with robust and effective verification/validation plans, • Partner with engineering to define critical-to-quality (CTQ) and/or key characteristics and acceptance criteria, • Partner with engineering to develop and execute product reliability strategies and test plans, • Lead root cause analysis and corrective actions for design, integration, and test failures, • Establish reliability metrics/targets and track performance over time, • Build scalable and modular processes aligned with AS9100 and customer requirements to support rapid growth initiatives, • Develop metrics and dashboards to analyze trends to monitor and improve quality performance., • Serve as the technical interface for customers and regulatory audits related to product quality, • Act as the bridge between engineering, manufacturing, supply chain, and program teams, • Influence without authority in a high-growth, ambiguous environment, • Support supplier quality and ensure external partners meet design and reliability standards, • Collaborate with manufacturing and engineering to drive system wide quality initiatives to meet quality and reliability objectivesBasic Qualifications:, • Bachelor's degree in manufacturing, Mechanical, Electrical or Industrial Engineering, or related field, • 8+ years of experience in quality, manufacturing, or engineering working in aerospace/defense or similar regulated and/or complex hardware environments, • Experience leading cross-functional teams to solve highly visibility quality issues, drive continual improvement initiatives, and facilitate the adoption of quality requirements in the product development process, • Familiarity with system integration and test for complex applications, • Strong proficiency in root cause analysis, failure analysis, reliability testing, and problem-solving methodologies, • Strong background in NPI and transitioning products from development to production, • Knowledge of quality management system standards such as ISO 9001, AS9100, and/or other similar standards, • Knowledge of advanced quality mechanisms and principles utilizing an APQP framework (DFMEA, PFMEA, etc), • Experience using data analysis tools to identify trends and establish metrics using SPC and issue/defect management systems., • Good communication and interpersonal skills, with the ability to influence and drive improvements in a fast-paced environment.Preferred Skills and Experience:, • Advanced degree in engineering or related discipline, • Certifications such as ASQ Certified Quality Engineer (CQE), Certified Auditor or Six Sigma, • Working knowledge of Agile based development processes, • Strong understanding of electronics, complex assemblies, system integration and test, • Expertise in reliability modeling and statistical analysis, • Familiarity with MIL-STD testing standards and environmental qualification, • Experience supporting FRACAS and reliability growth programs, • Experience with Oracle ERP and QMS software implementation/execution.Additional Requirements:, • Ability to travel up to 25% as needed. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. At Epirus, you'll work with technical peers and great people—and get first crack at some of the defining technology challenges of our time. Here, "impossible" is just a challenge. We're a diverse, fast-growing team of change-makers fueling the future of energy with revolutionary solutions. Join us and rewrite the rules. As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $139,300—$160,000 USD

Job Description Mechanical Engineer - Healthcare Our Mechanical Engineering team is looking to add an experienced team member to our group of talented engineers. The Mechanical Engineer is a technical expert and high-level engineer who experienced in healthcare, responsible for technical execution, design leadership, and interdisciplinary coordination of complex mechanical systems. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role manages major portions of mechanical and plumbing scopes, guides QAQC efforts, mentors team members, and represents the discipline in client-facing settings. As trusted advisors, they represent the firm in client relationships, ensure technical excellence, and guide engineering strategy at the highest level. Their work influences practice-wide standards, design innovation, and technical mentorship. Essential Functions: • Lead the design and documentation of large-scale and complex mechanical systems—such HVAC, plumbing and/or fire protection systems - from concept through construction with minimal oversight., • Validate and approve key mechanical engineering calculations -such as load calculations, or refrigerant concentration limit calculations, plumbing system sizing, and equipment sizing - and integrate results into system design., • Resolve system conflicts during interdisciplinary coordination by collaborating with architectural, electrical engineering structural engineering, and civil engineering teams., • Serve as the primary mechanical technical contact across internal and external project teams., • Review and approve mechanical submittals, answer RFIs and evaluate substitutions; coordinate detailed responses with the broader team., • Perform site visits, field verification, and project walks with high autonomy; generate professional-level reports., • Provide mechanical design leadership from early concept through construction administration; make system selections, and documentation strategy., • Guide QAQC reviews for mechanical deliverables and assists in the development of project-specific mechanical quality plans., • Mentor support engineers and mechanical designers through delegation, technical feedback, and one-on-one coaching., • Develop onboarding content, technical training sessions, and reusable tools that support mechanical team development and consistency., • Participate in fee development, scoping, and resource planning for mechanical and plumbing scope in project proposals., • Lead internal and external project meetings by presenting mechanical system concepts, drive client decisions, and trade-offs., • Guide mechanical response strategies to field conditions, code conflicts, and VE proposals with clarity and ownership., • Influence client expectations around quality, performance, technical decisions, and lifecycle outcomes of mechanical systems. Requirements • Bachelor's degree in Mechanical Engineering, required., • P.E. licensure required., • 15+ years in the AEC Industry preferred., • Experience in designing systems for healthcare projects is required., • Familiar with ASHRAE 170 and FGI Guidelines is preferred., • An understanding of the financial status of projects as they progress, value of client relationships and deliver projects with a focus on the quality is required., • Healthcare Facility Design Professional Certification is a plus., • ASSE 6060 Medical Gas Certification is a plus., • Advanced written and verbal communication skills are required., • Strong organizational skills required., • Revit experience working regularly in the model is required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description About Epirus Epirus is a high-growth technology company dedicated to overcoming the asymmetric challenges inherent to the future of national security. Epirus' flagship product, Leonidas, is a software-defined system built using intelligent power management techniques which allow power-hungry systems to do more with less. Job objective: This is an exciting role an innovative, high-growth defense technology company. The ideal candidate for the position is someone who has experience designing, verifying, and integrating state-of-the-art FPGA systems and embedded processing solutions for RF applications. As a Sr. FPGA Engineer, you will work closely with a talented, multi-disciplinary engineering team in a fast-paced environment to apply emerging technologies in innovative ways to rapidly produce new products. Duties • Design and verification of RTL modules for FPGA applications, • Ownership of entire FPGA designs from initial architecture trades through implementation, verification, and hardware bringup, including FPGA sizing estimation and IO planning., • Lead initial testing and bring-up of custom FPGA circuit cards, validating functionality of on-board peripherals including memory interfaces, Ethernet controllers, and integrated sensors., • Automating test environment (up to and including hardware-in-the-loop testing), lab equipment, and measurement devices, • Capturing design tradeoffs, state machine flow, system address maps, and block diagrams Required Qualifications, • Bachelor's degree in Electrical Engineering or a related field., • 5+ years of experience in FPGA design, implementation, and testing, • Extensive experience implementing FPGA designs and embedded processing designs on embedded hardware, • Experience working with latest generation state-of-the-art Xilinx/Intel Parts and associated tool sets (Vivado, Quartus), • Understanding of common digital communication protocols (SPI, I2C, UART), • Development Experience of Integrated Embedded Applications (ARM, GPU), • Experience with standard bus and streaming protocols, such as AXI and AXI-Stream, • Experience with Continuous Integration and Continuous Delivery processes, • Active Secret or Top Secret clearance, or ability to obtain one desired but not required. Desired Qualifications, • Experience with design automation, scripting languages (TCL, Python, Perl, Matlab), • Knowledge of Advanced Firmware Verification Testbench Development (UVM, System Verilog), • Skilled with Advanced High-Speed Verilog/VHDL Designs including High Speed Memory Interfaces (DDR4, HBM) and High Speed SerDes IO and Protocols (100GE, JESD204B, Interlaken), • Experience implementing Complex DSP Algorithms on FPGAs using tools such as Matlab, Simulink, HDL Coder to implement advanced communications or other designs in FPGA, • Experience collaborating with software engineering team in an SoC environment to develop designs that incorporate HDL combined with embedded Linux, • Good written and oral communication skills, • Collaborative; capable of working across all levels of the organization, • Organized; comfortable working in a fast-paced, ever-changing environment ITAR REQUIREMENTS: As required by the Equal Pay Transparency Act, Epirus provides a reasonable range of minimum compensation for roles that may be hired. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and specific office location. For the state of California only, the range of starting pay for this role is: $142,800—$175,600 USD

Job DescriptionDescriptionAs a Manufacturing Engineer at Impulse, you will own the manufacturing of batteries across our Mira and Helios vehicles. Your work will power our spacecraft and customer payloads. Your expertise will directly impact the reliability and performance of the systems we send into orbit and beyond. Leveling will be commensurate with experience. Responsibilities • Lead the development and implementation of battery manufacturing lines across our vehicles., • Define the manufacturing process flow of battery packs and scale-up of battery pack production rate., • Collaborate with design engineers to ensure manufacturability, review drawings and provide DFM/DFA feedback on battery packs., • Collaborate with cross-functional teams on quality and reliability., • Perform capacity planning for battery manufacturing and own schedule for battery production., • Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields., • Provide guidance to technicians during the production process., • Define and implement battery safety protocols and train technicians to work safely with batteries. Minimum Qualifications • Bachelors' degree in Electrical Engineering, Mechanical Engineering, Aerospace Engineering or related field, • 3+ years of demonstrated manufacturing experience with battery pack/module manufacturing and testing., • Knowledge of battery management systems (BMS)., • Experience with CAD software, Simens NX preferred., • MS in Electrical Engineering, Mechanical Engineering, Materials Engineering or related field, • 6+ years of demonstrated experience in battery manufacturing and testing., • Experience with welding for battery applications., • Experience with potting for battery applications., • Experience with characterization of battery performance., • Experience in hardware development for space applications. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description At Senra Systems, we believe that the future of manufacturing lies not in automation, but in configuration. We supercharge electrical wire harness manufacturing through software configuration, transforming skilled assembly tasks into high-throughput production lines. We enable customers to design what they want, when they want it and deliver harness builds at record-breaking speed. We're looking for a Manufacturing Engineer to own and execute wire harness programs from engineering release through production readiness. You will develop manufacturing documentation, define build processes, and drive program‑level improvements that enhance quality, repeatability, and scalability. This role is ideal for an engineer who can independently execute defined programs, solve technical challenges, and contribute to continuous improvement—without needing to manage org‑wide standards or enterprise‑level systems. Prior wire‑harness experience is not required but strongly preferred. What you'll own: Program Execution & Manufacturing Readiness • Own manufacturing readiness for assigned harness programs from kickoff through release, • Develop engineering packages including work instructions, formboards, and basic tooling and fixture concepts, • Translate drawings, BOMs, and customer requirements into clear, production‑ready processes, • Coordinate with cross‑functional teams to ensure programs meet quality, schedule, and manufacturability expectations, • Define and refine manufacturing processes to improve build quality, consistency, and efficiency, • Evaluate parts and assemblies to determine practical, scalable build approaches, • Support process validation, workflow optimization, and equipment/tooling readiness, • Apply lean principles, time studies, and capacity considerations to improve throughput, • Ensure all documentation is clear, accurate, and aligned with quality and customer requirements, • Maintain and improve work instructions, formboards, and process documentation, • Surface recurring issues and contribute to structured process improvements, • Support implementation of standardized workflows and engineering best practices, • Collaborate with software/product teams to enhance manufacturing workflows and traceability, • Support technical communication with customers in partnership with Program Management or senior engineers, • Provide input on risks, tradeoffs, and feasibility during program reviews Required • Bachelor's degree in Engineering or related STEM field, or equivalent hands‑on experience, • 3–5 years of manufacturing engineering experience in production environments (wire harness, electrical assembly, aerospace, electronics, or similar), • Experience supporting or owning manufacturing builds or programs end‑to‑end, • Working knowledge of:, • Process development and documentation, • Lean manufacturing and 5S, • Time studies and basic capacity planning, • CAD tools for creating assembly drawings and formboards, • Strong problem‑solving skills and ability to execute with moderate autonomy, • Ability to manage multiple priorities in a fast‑paced environment, • Experience with IPC/WHMA‑A‑620 and/or NASA STD 8739.4, • Background in aerospace, defense, or high‑reliability manufacturing, • Experience in contract manufacturing or high‑mix production, • Hands‑on familiarity with harness fabrication, testing, or assembly (not required), • Exposure to MES/ERP systems, • Experience supporting NPI or early‑stage production builds, • Compensation will be based on experience, qualifications, and other job-related factors., • Salary Range: $100,000-$130,000, • Unmatched opportunities to drive impact on a friendly and mission-driven team, • Own a piece of the pie with equity participation!, • Comprehensive medical, dental, vision, life and long-term disability coverage, • Flexible Spending Account (FSA) and Dependent Spending Account (DSA) for health-related expenses, • 20 vacation days per year and 12 company holidays for rest and relaxation, • a 401(k) plan to set yourself up for retirement, • Choose a record you love, and we'll add it to our growing vinyl collection!, • $50/month DoorDash credit – lunch is on us!, • Up to $100/month reimbursement for gym memberships, • Fully stocked kitchen with snacks and beverages, • Regular team-building events, lunches, and the occasional breakfast burrito!, • Bright, open office with communal spaces for collaboration and free parking ITAR REQUIREMENTS: • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Pay range$100,000—$130,000 USD

Job DescriptionSalary: $120,000 - $160,000 Job Summary Join Thinkom Solutions as a DSP Engineer specializing in coherent RF signal combining and beam forming. We are seeking a technical lead to architect, design, and develop robust FPGA-based solutions within a C++/Xilinx HLS environment. If you excel at creating and optimizing high-bandwidth RF architectures and turning theoretical DSP into efficient silicon reality, we want to hear from you. Essential Job Duties and Responsibilities • Develop coherent combining and beamforming modules using C++ and Xilinx HLS, ensuring precise phase alignment and time delay across multiple channels., • Requirements capturing, design definition & implementation of VHDL detailed designs., • Implement VITA 49-compliant data packetization for high-speed IF or RF data distribution., • Design and fine-tune DSP blocks (e.g., FFT, filtering, NCO, cross-correlation) to meet stringent real-time and resource utilization requirements., • Work closely with cross-functional teams to ensure signal integrity and minimize latency in large-scale, multi-channel systems., • Use Vivado (or Vitis) for synthesis, simulation, timing closure, and debug., • Create testbenches in C++/System Verilog/Python to validate functional correctness and phase coherence across all channels., • Provide guidance to junior engineers, reviewing design approaches and ensuring best practices for coherent signal processing., • Collaborate with firmware, software, and hardware teams to define project requirements and deliver high-quality solutions on schedule., • Other duties as assigned. Skills and/or Experience Needed • MS or BS in Electrical Engineering, Computer Engineering, or related field, or related engineering field., • 5+ years of professional experience in FPGA development, specifically in signal processing and high-speed I/O., • Proven expertise with Xilinx HLS (Vivado / Vitis) and writing performance-critical C++ for FPGA synthesis., • Hands-on experience with coherent combining, beamforming, or similar multi-channel synchronization techniques., • Strong knowledge of VITA 49, including metadata handling and packet-based transport of digitized signals., • Knowledge of Software-Defined Radio (SDR) is a plus., • Experience with Xilinx RFSoC is a plus., • Proficiency in VHDL/Verilog and FPGA design methodologies., • Experience with Vivado Design Suite and Xilinx SDK., • Familiarity with high-bandwidth networking protocols (Ethernet up to 100Gb, PCIe, or similar)., • Solid grasp of digital signal processing fundamentals (filters, FFTs, channelization, interference cancellation)., • Proficiency in FPGA development flows (Vivado, ModelSim, or similar) and lab debugging (ILAs, scopes)., • Excellent communication and collaboration skills., • Advanced degree (MSEE/PhD) with a focus on DSP, RF Communications, or FPGA acceleration preferred., • Experience with additional standards/protocols relevant to software-defined radio or phased-array systems preferred., • Familiarity with scripting languages (Python, TCL) for automation and testing is highly desirable., • Track record of publishing or patenting innovations in signal processing or hardware acceleration highly desirable. Language Skills • Interpersonal skills to effectively work with internal peers as well as working effectively with suppliers and customers., • Ability to effectively present information in team meetings and design reviews, as needed., • Ability to communicate clearly and effectively in verbal and written form. Other Abilities • Must have substantial reasoning and problem-solving abilities., • Ability to meet deadlines and work extended hours, as needed., • Strong analytical skills and solid work ethic. Additional Requirements • Must be eligible to obtain and hold a US DoD Security Clearance in support of US Government contracts/subcontracts., • Willing to be in office 5-days/week. Physical Demands • This position uses a computer terminal to access, input, and retrieve data., • This position may be subject to interruptions that may cause a change in immediate priorities and/or work focus., • While performing duties to this position, employee is occasionally required to stand, walk, sit, stoop, reach, and/or bend., • May occasionally lift and/or move parts, files or boxes up to 40 pounds., • May be subjected to occasional irregular or extended work hours., • May be required to sit for extended lengths of time., • Must be able to work in an environment that may be subjected to occasional loud noises, hazardous materials and chemicals. Salary Range - $120,000 - $160,000 ThinKom offer generous benefits including: Medical, Dental, Vision, Disability, Life, 401k Matching (4%), PTO, paid Holidays and Bonus Plan. ThinKom Solutions is an Equal Employment Opportunity Employer. ThinKom Solutions is a Drug and Alcohol-free working environment with a zero-tolerance policy

Job DescriptionDescriptionAs an Automation & Controls Engineer at Impulse, you will be responsible for the design and commissioning of industrial machinery and systems for R&D, test, and production while working closely with a fast-paced, agile team. Responsibilities • Own all aspects of equipment design from concept, requirements, and commissioning, • Generate necessary schematics and for electrical and fluid systems in EPlan to required standards, • Write and debug software for PLCs in TwinCAT that is maintainable and scalable, • Programming of various industrial controls hardware (VFDs, motor starters, PLCs, etc.), • Selecting of application specific hardware (circuit protection, VFDs, motion systems, robots, etc.), • Development of HMIs that are easy to use, functional, and can be used for diagnostics & troubleshooting, • Bachelor's degree in a relevant engineering field, • Familiarity of PLC systems, • Object oriented programming in structured text per IEC 61131-3, • Industrial Safety, • Schematic design with EPlan, • 3D Control panel design with EPlan ProPanel, • Troubleshooting electrical and mechanical systems, • Understanding of ISO 13849, ANSI B11, or IEC 61508 safety standards, • Knowledge of UL508A, NFPA 70, NFPA 79 standards, • Familiarity with industrial protocols such as EtherCAT, Profinet, IO-Link, etc., • Work with external vendors and manufacturers for sourcing hardware and solutions, • Experience with hazard risk assessments and mitigation plans Additional Requirements: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Claros is a power management solutions company that is innovating at the intersection of power and compute to make AI more sustainable and widely available. By driving down the cost and complexity of power delivery and leveraging innovative hardware and software, the company seeks to decrease energy consumption, optimize power delivery, increase compute performance, and maximize the efficiency of AI operations. Staff Test Engineer – Power Electronics / IVR Validation Location: Minimum of 3 days a week in the office in Torrance, CA. (Hybrid role) About Claros Claros enables Grid-to-Chip power infrastructure solutions for next generation Data Centers. Our mission is to transform power management to meet the global energy demand created by big data, artificial intelligence and ML. Through our innovative power delivery platform, our technology helps next generation data centers implement and operate server platforms that identify, control, and optimize power and energy management systems to meet real-world end user demands. We serve government and commercial customers. About The Team We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never "no, but…." instead "yes, if….". We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. About The Role We are looking for a Staff Test Engineer to own lab and bench activities for the IVR team, with a strong focus on Engineering Validation Test (EVT) and Design Validation Test (DVT). In this role, you will be responsible for developing and executing test plans, verifying compliance to product requirements and specifications, validating real-world hardware performance, bringing up new evaluation platforms, automating measurements, and driving debug and root-cause analysis. You will work closely with design, systems, packaging, digital, and packaging teams to ensure IVR products meet performance, reliability, and readiness targets. This is an excellent opportunity for a candidate who thrives in a fast-moving hardware environment and wants direct impact on the development of advanced power delivery technology. What You Will Do • Own bench-based verification and validation of IVR hardware across prototype and pre-production phases, • Lead execution of EVT and DVT for integrated voltage regulator products, evaluation boards, and demonstrator platforms, • Develop and execute test plans that verify compliance to electrical, thermal, functional, and protection requirements, • Validate real-world product performance across operating conditions, corner cases, and intended use environments, • Perform hardware bring-up, debug, and characterization of evaluation boards and system platforms, • Define pass/fail criteria, test coverage, and readiness metrics for validation milestones, • Execute and analyze tests for:, • efficiency, • regulation accuracy, • load transient response, • startup and shutdown behavior, • fault response and protection features, • telemetry accuracy, • thermal performance, • control behavior and stability, • Debug issues related to power delivery, board functionality, signal integrity, telemetry, and control interactions, • Develop and maintain automated test setups and scripts using Python, LabVIEW, MATLAB, or similar tools, • Integrate oscilloscopes, electronic loads, power supplies, DMMs, DAQs, power analyzers, and thermal instrumentation into repeatable test environments, • Automate data logging, post-processing, visualization, and report generation, • Support development of test fixtures, interface boards, and bench infrastructure for scalable and repeatable verification and validation, • Partner with cross-functional teams to resolve failures, improve coverage, and drive closure of validation issues, • Generate clear test reports and communicate findings, risks, and recommendations to engineering stakeholders, • Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or related field, • 4+ years of experience in test engineering, validation engineering, verification engineering, power electronics, or hardware development, • Strong hands-on experience with bench testing, hardware bring-up, and debug, • Experience with EVT, DVT, product verification, specification compliance testing, or hardware validation, • Good understanding of power electronics, analog circuits, DC-DC converters, voltage regulators, or power management systems, • Experience with standard lab instrumentation including oscilloscopes, power supplies, electronic loads, DMMs, and power analyzers, • Experience with test automation using Python, LabVIEW, MATLAB, C/C++, or similar tools, • Strong debugging, root-cause analysis, and problem-solving skills, • Experience verifying and validating high-current, low-voltage power delivery systems, • Background in IVR, VRM, POL regulators, PMICs, or other power conversion products, • Familiarity with I2C, SPI, PMBus, or similar interfaces, • Experience with thermal characterization, transient testing, control loop analysis, and protection feature verification, • Exposure to AI hardware, data center power, advanced packaging, or high-performance compute systems, • Career track opportunity with potential for rapid advancement with strong performance as the firm grows, • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning. Our Red Cell Partners Benefits: • Career track opportunity with potential for rapid advancement with strong performance as the firm grows, • 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family., • Paid maternity and paternity for 14 weeks at employees' normal pay., • Unlimited PTO, with management approval., • Opportunities for professional development and continued learning. By submitting an application, you acknowledge that Red Cell Partners, LLC ("Red Cell") uses third-party service providers to facilitate its recruitment and hiring processes. These providers include applicant tracking systems, candidate verification platforms, and fraud detection tools (collectively, "Hiring Platforms"). Your application materials, including your résumé, cover letter, work samples, responses to application questions, and any other information you submit, may be transmitted to and processed by these Hiring Platforms for the following purposes: • Managing and administering your application throughout the hiring process;, • Verifying the accuracy and authenticity of application materials, including by cross-referencing information you provide against publicly available sources and proprietary databases; Red Cell requires its Hiring Platform providers to process your information solely for the purposes described above and in accordance with applicable law. Your information will be retained only for as long as necessary to fulfill these purposes and any applicable legal obligations, after which it will be deleted in accordance with Red Cell's data retention policies. For more information about how your data is used, please refer to our Privacy Policy and Applicant Privacy Notice.

Job DescriptionDescriptionAs a Structural Test Engineer at Impulse Space, you will be responsible for all aspects of structural test equipment design and operations while working closely with a fast paced, agile team that produces high-performance spacecraft from clean sheet designs. Responsibilities • Design, analyze and build static and dynamic structural load test stands in support of the Helios cryogenic orbital transfer vehicle and Deneb engine components, • Create fabrication drawings, define project execution plans, procure parts and equipment, • Assemble, commission, and operate test stands, • Own major test stand build up while collaborating with wide ranging teams across the company and at different physical locations, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in mechanical, aerospace engineering or related field, • 3+ years of experience in structural design and/or testing, • Strong engineering design fundamentals in structural and mechanical analysis, • Able to create and clearly communicate fluid P&IDs, electrical and controls schematics, • Able to identify and procure appropriate test equipment, • Prior hands-on operational experience working with cryogenic, flightweight structures, • Previously demonstrated ownership of test stand design and build-up, • Demonstrated ability of taking project ownership and working well in small teams Preferred Skills and Experience • Successful demonstration of full life-cycle ownership of structural or mechanical test equipment, • Prior experience working with hydraulics, high pressure gases, and cryogenic propellants, • Working knowledge of components (actuators, load cells, LVDTs, valves, sensors, power supplies) and hands-on skills (tube fabrication, metalworking, wiring), • Experience with Siemens NX and Teamcenter, • Experience in a startup or agile development environmentAdditional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Senior Manufacturing Engineer (Solar Modules) at Impulse, you will work with cross-functional teams to build solar modules for space applications. You will own the build and testing of solar modules in production. Your expertise will directly impact the reliability and performance of the systems we send into low-earth orbit and beyond. Leveling will be commensurate with experience. Responsibilities • Develop and implement solar module manufacturing processes across our vehicles, including development builds and to understand how to improve the manufacturing process and iterate new designs., • Define the manufacturing process flow of solar modules and scale-up of module production rate., • Conduct comprehensive analysis on the solar module manufacturing process to reduce defects, improve quality and improve yield., • Lead failure analysis during prototype fabrication to inform design decisions., • Collaborate with design engineers to ensure manufacturability, DFM/DFA of solar modules., • Collaborate with cross functional teams long-term reliability in space environments., • Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields., • Provide guidance to solar manufacturing technicians., • Support environmental and functional testing in production. Minimum Qualifications • Bachelors' degree in Materials Engineering, Chemistry, Physics, Mechanical Engineering, Electrical Engineering or related field, • 4+ years of demonstrated development and/or manufacturing experience with solar modules, either for terrestrial or space applications, • 4+ years of experience with setting up a solar manufacturing line, including using stringers and laminators., • Experience with failure analysis of solar modules or electronic devices in a development or production setting. Preferred Skills and Experience • MS degree in Materials Engineering, Chemistry, Physics, Mechanical Engineering, Electrical Engineering or related field, • 6+ years of demonstrated manufacturing experience in solar manufacturing, particularly for the unique demands of space applications, • Expertise with material selection for solar modules used in space applications and how these materials fail in space applications, including cover sheets, encapsulants, interconnects and backsheets., • Experience with providing DFM feedback on space solar modules, with an emphasis on reliability in LEO and GEO., • Experience with failure analysis of space solar modules and a deep understanding of failure modes of solar arrays in LEO and GEO and how to mitigate these in a manufacturing setting. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Avionics / Electrical Engineer – Build Flight-Critical Hardware for Next-Generation Space Systems! El Segundo, CA | On-site Opportunity Summary We are seeking an Avionics / Electrical Engineer to help design and deliver the electrical backbone of advanced spacecraft systems operating in demanding environments. This role is centered around high-performance hardware development, rapid iteration, and deep technical ownership. You will work closely with a small, highly capable engineering team to architect, build, and validate avionics systems that move quickly from concept to flight. This position is ideal for engineers who enjoy working close to the hardware, solving complex multidisciplinary problems, and operating in environments where execution speed and engineering rigor matter equally. You will play a key role in bringing reliable, flight-ready systems online while helping shape system architecture and engineering best practices as the company scales. About Us We are a venture-backed aerospace startup focused on building advanced spacecraft systems that enable ambitious in-space missions. Our team combines deep technical experience with a startup mindset, emphasizing ownership, fast iteration, and first-principles engineering. Engineers here work across disciplines, move quickly from design to testing, and contribute directly to systems that are built to fly. Job Duties • Own development of avionics and electrical subsystems from early architecture through vehicle integration, • Design, prototype, and validate flight computers, electrical power systems, communications hardware, and core avionics electronics, • Perform system-level electrical trades, requirements capture, and interface definition across vehicle subsystems, • Develop avionics solutions supporting telemetry, communications, sensing, timing, navigation, and safety functions, • Design and bring up PCBs and supporting electronics hardware, • Build and execute ground testing and data acquisition systems to support rapid validation, • Develop and operate hardware-in-the-loop test environments to validate system behavior, • Perform hands-on troubleshooting and debugging at board, harness, and vehicle levels, • Lead root cause and corrective action investigations to improve reliability and performance, • Collaborate closely with software, propulsion, and systems engineers to ensure end-to-end integration, • Support harnessing design, mechanical packaging, and system integration efforts, • Execute rigorous technical reviews including design, test readiness, and flight readiness reviews, • Maintain clear engineering documentation supporting development and qualification efforts, • Ensure designs align with applicable safety and government compliance requirements Qualifications • Bachelor’s degree in Electrical Engineering, Aerospace Engineering, Computer Engineering, Physics, or a related technical discipline, • 2+ years of experience developing electrical or avionics systems for complex hardware platforms, • 1+ years designing electrical or control systems for spacecraft or similarly demanding environments, • Strong hands-on experience with circuit design, electronics prototyping, and lab test equipment, • Experience troubleshooting electronics at both board and system levels, • Experience designing hardware that operates in harsh or high-reliability environments, • Familiarity with PCB design tools such as Altium Designer or comparable platforms, • Strong engineering fundamentals and first-principles problem-solving approach, • Ability to work autonomously and execute quickly in a fast-paced environment, • Clear technical communication skills and strong ownership mindset, • U.S. Person status required due to export control regulations Preferred Experience • Experience delivering avionics or electrical systems that reached deployment or operational use, • Background in high-performance vehicles, aerospace hardware, defense systems, robotics, or autonomous platforms, • RF or communications systems experience, • Familiarity with electrical analysis and simulation tools such as LTSpice, ANSYS HFSS, or similar, • Experience with integration testing, environmental testing, or mission operations, • Knowledge of power electronics, batteries, sensors, or safety-critical hardware design, • Experience working under aggressive schedules with rapid design-build-test cycles Why Join Us • Opportunity for growth and increasing technical ownership, • High-impact role working on real flight hardware, • Fast-paced, execution-focused engineering environment, • High autonomy with minimal bureaucracy, • Close collaboration with experienced technical leadership, • Broad technical exposure across multiple spacecraft subsystems, • Strong PTO policy, • Medical, dental, and vision benefits, • 401(k) plan, • Equity options Compensation Details $140,000 - $220,000 #LI-AV

Job Description Divergent is a technology company that has architected, invented, built, and commercialized an end-to-end factory system called the Divergent Adaptive Production System (DAPS) that comprehensively uses machine learning to optimally engineer, additively manufacture, and flexibly assemble complex integrated vehicle structures and subsystems. Products created using DAPS are superior in performance, lower in cost, rapidly customizable to meet mission and customer-specific requirements, faster to market, and scalable on demand to high volume production. Divergent is a qualified Tier 1 supplier to global automotive OEMs, and Divergent is now expanding to support mission critical needs in the Aerospace and Defense sector. Join us to be a part of this transformative journey, where your impact will shape the future of technology and production. Purpose Divergent is a technology company, based in Los Angeles, on a mission to build the 21st century industrial base with its proprietary Divergent Adaptive Production System (DAPS™). We automate the design, manufacture, and assembly of complex structures using non-design specific software, additive manufacturing, and robotic assembly. We actively work with governments, major automotive OEMS and aerospace primes globally, addressing the automotive, aerospace, aviation, transportation, and agricultural industries. We are seeking a hands-on, technical candidate to be the driver of our production data systemization and simulation efforts. As a member of the team, this candidate will operate at the intersection of manufacturing operations, data, and strategy and will be responsible for scoping, conceptualizing, and implementing high impact tools that drive factory operations. You will act as a translator between functional groups and leadership, partnering with cross functional stakeholders (Factory Data Acquisition, Data, Software, and Operations) to turn messy systems data into actionable insight. This is an applied, hands-on role that combines data architecture, analysis, and system design to make our operations measurable, predictable, and optimizable. The Role • Partner with leadership to define, implement, and operationalize a measurement framework that translates raw data into structured parameters - revealing operational efficiency, quality, and financial insights., • Standardize our inputs/outputs across models to create continuity between forecasting, scheduling, cost, and pricing., • Extend, tune, and maintain a discrete-event simulation that drives factory performance, forecasts demand, and simulates factory scaling scenarios., • Prototype 0 à 1 parameterized data models and internal tools - including optimization tools, state machines, dashboards and simulation models that drive behavior across floor level operators, managers and executives., • Collaborate with factory operations and engineering teams to identify tool gaps and scope and drive internal and external tool implementations., • Collaborate with factory data teams to identify data gaps and scope and drive projects to connect factory sensors, equipment, MES, ERP, and other operational systems., • Drive projects through discovery, requirement definition, data backed proposal, functional prototyping, and formal implementation - including business case modeling and ROI justification for internal or external tool investments., • Conduct a broad range of ad-hoc analysis spanning from process efficiency to complex scenario analyses that inform scheduling, staffing, and investment decisions., • Create presentations, visual workflows, diagrams, and prototypes to communicate complex problems clearly and align stakeholders in a common direction., • Clean, validate, and prepare data for analysis and simulation., • Document systems, pipelines, and assumptions clearly to enable scaling.Basic Qualifications, • Ability to lawfully access information and technology that is subject to US export controls, • Bachelor's or Master's in Engineering, Data Science, Data Analytics, Operations Research, or related field (or equivalent experience), • Demonstrated experience in data analytics, process improvement, or similar roles, • Strong proficiency in Python (pandas, NumPy, data pipelines, APIs, light scripting), • Strong proficiency in SQL and relational data modeling, • Experience in front-end HTML development and web hosting, • Demonstrated ability to perform descriptive and diagnostic analysis, basic statistics, and visualization, • Demonstrated knowledge of manufacturing terminology and operational data modeling (cycle time, yield, throughput), • Demonstrated competency with data visualization tools like Power BI (or related), • Demonstrated competency with UI/workflow visualization tools (Figma, Illustrator, Visio), • Strong experience with presentation/organizational tools (Microsoft Suite, Atlassian Suite, Project Management Software, Smartsheet), • Experience gathering project requirements from stakeholders and taking a project from initial concept to finished product, • Strong presentation and oral skills with the ability to translate technical concepts to non-technical audiences for stakeholders internal and external to the organization, • Ability to translate messy and emergent business challenges into structured problem statements, • Focus on detail, iterative design, human centered design, and systems thinking, • Comfortable in a fast paced, dynamic environment, • Ability to lean on and implement AI tools into daily workflow Preferred Qualifications • Experience in a start-up, consulting, or similar high-growth, fast-paced, rapidly changing environment, • Experience interfacing with engineering and manufacturing groups to understand system designs and the associated constraints, • Experience interpreting engineering drawings and CAD, • Familiarity with basic financial concepts and modeling, • Familiarity with MES/ERP/SCADA (OPC-UA, MTConnect, MES/ERP systems, Splunk, InfluxDB), • Familiarity with operations research / optimization methods (OR Tools, Optuna), • Familiarity with statistical / machine-learning fundamentals and simulation frameworks (SimPy, AnyLogic) Work Environment • Office: Desk work, programming, and design tasks., • Holistic Compensation Package: Enjoy a world-class compensation package that includes a competitive salary, equity plan, and discretionary results-based incentive bonus opportunities, ensuring you're truly valued for your contributions., • Wellness and Time Off: Embrace a healthy lifestyle with paid vacation, sick time, and company holidays, including a year-end shutdown to recharge. We support growing families with paid parental leave, recognizing the importance of bonding time., • Comprehensive Health and Wellness: Prioritize your well-being with our comprehensive health and wellness benefits, offering both HMO and Premium PPO options. Additionally, benefit from company-sponsored life insurance and short and long-term disability coverage for peace of mind., • Investment in Growth: We're committed to your professional development. Take advantage of reimbursement opportunities for learning and development initiatives, empowering you to continuously expand your skill set and reach peak performance., • Collaborative and High-Performing Environment: Join our collaborative, dynamic, and high-performing team within a fast-paced, mission-driven company. Together, we're disrupting the traditional manufacturing industry, fostering innovation, and integrating people and technology to reduce our footprint. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected characteristic. Divergent provides affirmative action in employment for qualified Individuals with Disabilities and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. EEO Poster In order to adjust to changes in our business, it may become necessary to add, remove or modify certain duties and responsibilities, or to reassign you to another job position. From time to time you may be asked to work on special projects or to assist with other work. Your cooperation and assistance in performing such additional work is expected. E-Verify: Right to Work Our company participates in E-Verify. E-Verify is a program that electronically confirms a candidate's eligibility to work in the United States after completing the Employment Eligibility Verification (Form I-9). The information provided on the Form I-9 is compared to the records contained in the Social Security Administration and Department of Homeland Security (DHS) databases. This helps employers verify the identity and employment eligibility of newly hired employees. Eligibility to Work Poster (English) | Eligibility to Work Poster (Spanish) Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO) Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance (FCIHO), we will consider for employment qualified applicants with arrest and conviction records. No agencies, no solicitations, and no calls please.

Job Description A New Paradigm For Space Operations. Who We Are: Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The Flight Software Engineer will design, develop, and maintain the critical software systems that control and operate our satellites, ensuring reliable performance and mission success in the challenging environment of space. Integrate and test software in simulation, flight replica, flight, and hardware-in-the-loop environments. Work with multiple engineering teams to establish software requirements and design. Partner with various engineering teams to commission newly launched satellites What It Takes: • Bachelor of Science (BS) or Master of Science (MS) degree in Computer Science, Electrical Engineering, or Computer Engineering., • 2- 3 years of experience developing embedded or real-time software for space, aerospace, robotics, or mission-critical systems., • Knowledge of software development through all phases of the system lifecycle—from requirements through flight operations., • Entry level to Intermediate proficiency in C/C++, with working knowledge of Python or scripting languages for automation and testing., • Familiarity with RTOS, bare-metal programming, or Linux-based embedded systems., • Basic understanding of software reliability, deterministic timing, concurrency, and resource management in constrained environments., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Experience with flight software frameworks (e.g., NASA cFS, F' FPrime, or custom architectures)., • Familiarity with model-based systems engineering (MBSE) and interface control documentation., • Knowledge of space communication protocols (CCSDS, SpaceWire, MIL-STD-1553, etc.). *Our vision is unique, and so is the team we're building. If you're driven to succeed in this role, even if your background doesn't fully align with every qualification, we want your application. Where You'll Be: • Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$120,000—$150,000 USD

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. Position Overview: The Electrical Engineer will play a critical role in designing, building, and maturing prototypes for Space Kinetic's core technology. You will support the team in refining the electrical architecture of the current prototype and driving the system closer to a flight-ready configuration with each iteration. This role is ideal for someone who enjoys taking concepts from schematic to hardware, solving complex electrical challenges, and working closely with mechanical and manufacturing teams to bring cutting-edge space hardware to life. What You'll Do: • Design, develop, and build electrical prototypes for Space Kinetic's core technology., • Refine and finalize and the current prototype's electrical design to support all phases of prototype maturation., • Undertake and complete circuit design tasks, generate detailed schematics, and perform component selection aligned with environmental and system requirements., • Apply detailed tolerancing, design-for-manufacture principles, and thorough documentation across all electrical prototype phases., • Support PCB layout design and coordinate with external vendors for fabrication and assembly of PCB components., • Collaborate closely with the Space Kinetic manufacturing and engineering team to integrate electrical systems into mechanical assemblies., • Verify and validate your electrical designs through testing, troubleshooting, debugging, and iteration to improve system reliability and performance., • Actively participate in design reviews, contribute to system-level engineering discussions, and ensure the electrical subsystem progresses toward flight-readiness., • Support the creation and maintenance of electrical documentation, including BOMs, wiring diagrams, interface control documents (ICDs), and test procedures., • Ensure each design iteration moves the system closer to a flight-ready prototype aligned with Space Kinetic's 2-year flight demonstration goal. What It Takes: • Bachelor's degree in Electrical Engineering or a closely related STEM (Science, Technology, Engineering or Mathematic) field., • A minimum of 3–5 years of hands-on electrical engineering experience, ideally involving prototype development., • Proficiency in circuit design, schematic creation, and component selection., • Experience working with Schematic / PCB design tools (e.g., Altium)., • Demonstrated experience building and testing electrical systems or prototypes., • Strong understanding of electronics fundamentals, wiring practices, and system integration., • Ability to troubleshoot circuits, debug hardware, and iterate rapidly., • Experience collaborating with vendors for PCB fabrication and assembly., • Excellent documentation, communication, and cross-functional collaboration skill, • Ability to build and maintain a network of talented individuals. Prioritizes organizational and planning skills., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Ability to maintain or obtain a Government Security Clearance. What We'd Love:, • Experience developing hardware for aerospace, defense, robotics, or similarly rigorous applications., • Familiarity with design-for-manufacture (DFM), design-for-test (DFT), and tolerance analysis., • Knowledge of embedded systems, field oriented controls, microcontrollers, sensors, and power electronics., • Experience with environmental or functional testing of electrical systems., • Hands-on experience with lab equipment (oscilloscopes, multimeters, power supplies, logic analyzers)., • Ability to work in a fast-paced startup environment with evolving requirements.Where You'll Be:, • Competitive Base Salary + Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$97,000—$125,000 USD

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The Senior Mechanical Design Engineer will provide guidance for design and prototype builds for the Space Kinetic core technology to achieve our mission of a flight demo within the next 2 years in a fast-paced startup environment. Design and develop system and subsystem assemblies, mechanisms and moving assemblies including linkages, gears, cams, actuators, and precision motion systems. Perform mechanism design, tolerance analysis, and kinematic studies to ensure reliable operation. Create 3D CAD models, assemblies, and engineering drawings using tools such as SolidWorks, Creo, CATIA or NX. Support the mechanical simulations and FEA teams creating step files, simplified reps and volumes to assist with the modeling to validate strength, fatigue, and functional performance. Design and develop prototype assemblies and test mechanisms to validate functionality and operational stability. Work with and support cross-functional teams including simulation, electrical, manufacturing, and systems engineering. Support design for manufacturing (DFM) and design for assembly (DFA) initiatives to drive down cost and schedule. Prepare technical documentation, test plans, and support design reviews. Key Responsibilities: Mechanism Development • Design and develop space-rated mechanisms, including:, • Release and separation systems, • Motorized actuators and gear trains, • Payload pointing mechanisms, • Precision robotic or kinematic mechanisms, • Mechanism torque and friction calculations, • Select appropriate space-qualified materials, lubricants, bearings, and coatings., • Support development of hardware design and builds as well as prototype testing., • Investigate functional test anomalies and implement corrective design changes., • Lead mechanical support for environmental testing, including:, • Thermal Vacuum (TVAC), • Random vibration, • Shock testing, • Work closely with manufacturing and producibility teams to ensure designs are producible and testable., • Support assembly, integration, and test (AIT) of spacecraft hardware., • Follow design and hardware I&T processes, • Generate and maintain engineering documentation, including:, • Mechanical design packages, • Interface Control Documents (ICDs), • Assembly procedures, • Test plans and reports, • Present designs during major program reviews:, • SRR (System Requirements Review), • PDR (Preliminary Design Review), • CDR (Critical Design Review), • TRR (Test Readiness Review) What It Takes: • Bachelor's or Master's degree in Mechanical Engineering or related field., • 5+ years of mechanical design experience with focus on mechanisms., • Strong knowledge of:, • Kinematics and dynamics of mechanisms, • Gear systems, cams, linkages, springs, • Bearings and power transmission components, • Proficiency with 3D CAD software (SolidWorks, Creo, CATIA, or NX)., • Experience with GD&T and tolerance stack-up analysis., • Familiarity with prototype development and testing, • Ability to work with minimal direction or support and to learn quickly; strong analytical skills; creative and innovative thinking; detail-oriented; calm under pressure; commitment to follow-through; enthusiastic with a talent for motivating others; receptive to criticism and open to others' ideas; and effective in written communication., • Ability to build and maintain a network of talented individuals. Prioritizes organizational and planning skills., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Experience designing deployable space mechanisms., • Knowledge of space-rated materials, lubricants, and bearings., • Experience with spacecraft structures and payload integration., • Familiarity with NASA or DoD spacecraft development standards., • Hands-on experience in prototype builds and mechanism troubleshooting., • Strong understanding of mechanism kinematics and dynamics, • Experience designing high-reliability aerospace hardware, • Ability to work in cross-disciplinary engineering teams, • Strong problem-solving and root-cause investigation skills, • Experience working in fast-paced spaceflight development programs Where You'll Be: The position is onsite at our headquarters in El Segundo CA . Domestic travel may be required (up to ~20% of the year). What We Offer: • Competitive Base Salary + Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is currently $109,000 - $150,000. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$109,000—$150,000 USD

Job Description Associate Test Engineer Broadata Communications, Inc. (BCI) – Torrance, CA On-site Company Overview Broadata Communications, Inc. (BCI) is a privately held California-based corporation. BCI is a leading and innovative company specializing in the development of market-driven products for the transmission of digital multimedia (video, audio, and data) over fiber. Our clients are world leaders in their industries, spanning entertainment, broadcast, medical, professional audio/video, house of worship, education, government, military, and transportation sectors. We are ISO 13485 and ISO 9001 certified, with a strong commitment to quality, innovation, and continuous improvement. Summary We are seeking a detail-oriented Associate Test Engineer. This role focuses on performing integration testing, validation and verification of new and existing products, while developing and maintaining the company’s processes, specifications, and procedures for product development, troubleshooting, and testing. This is a hands-on role based in Torrance, CA, and is not a remote or hybrid position. We offer a fast-paced, high impact and stimulating environment with opportunities for professional growth within BCI. Veterans welcome! Key Responsibilities • Assist with the development verification, validation, troubleshooting, and testing for the release and maintenance of BCI and third-party hardware, firmware and software used in high-performance digital multimedia products., • Assist with the design, develop and execute product and system test plans to create formal validation and verification, documentation, methods, and processes, design and build fixtures, automated test jigs, scripts, and demo and test systems., • Assist with the development and perform formal validation and verification testing, including interoperability, safety, environmental, accelerated life cycle testing, pursuant to compliance certification to 60601., • Document and analyze test results, including product hardware, firmware, & software verification and validation, using both manual and automated testing as needed., • Conduct product failure resolution by analyzing failure reports, devising, and executing experiments to reproduce one or more failure modes, and systematically localizing root cause(s)., • Generate and review accurate and thorough technical content, including software/firmware requirements, design specifications, and test protocols., • Generate internal and external documentation such as datasheets, user manuals, test methods and processes, etc., • Contribute input to schedules and task breakdowns., • Contribute to organization of common and dedicated lab work benches, storage, mechanical tools, 3D printers, and electronics tools and supplies.Job responsibilities within our organization are dynamic. This may not be a complete list of duties. Other responsibilities and duties may be assigned by your supervisor or upper management. Education & Experience • B.S. in Electrical Engineering or a related field., • 1-3 years of experience designing and/or testing multimedia hardware and systems., • Basic electrical circuit and mechanical design knowledge sufficient for design of test fixtures including basic wiring and computer interfacing., • Experience executing test plans to create formal validation and verification documentation for multimedia hardware, firmware & software products., • Hands-on, demonstrable experience and working knowledge of most or all of the following:, • Experience with printed circuit board assembly and testing, cable harness production, and ESD control., • Multimedia test equipment such as Quantum Data, Audio Precision, PHABRIX, • Standard lab equipment such as oscilloscopes, logic analyzers, signal analyzers, signal generators, spectrum analyzers, etc., • Basic Python to understand and modify complex scripts and write simple scripts, • Experience with bug scrubbing, bug tracking, and bug tracking software, • Building test units, harnesses, and jigs using mechanical and electronic assembly, • Multidisciplinary bring-up and debugging techniques and approaches, • PC (Windows/Linux) and Ethernet network/ IP network setup and configuration, • High speed video interfaces and protocols (composite to 4K60, HDMI/DP/DVI, SDI, SDVOE, streaming, color spaces, standards and temperatures, and timing & synchronization)Skills & Abilities, • Solid Electrical Engineering background with the ability to read, understand, create, and edit multimedia PCB schematics, familiarity with basic FPGA/SoC/processors, memory systems, power subsystems including linear and switching topologies, and serial interfaces., • Strong team player who can work collaboratively with a diverse team to identify root cause of complex system problems, for both internally reported failures as well as customer RMAs, using Ishikawa/fishbone analysis to find effective, practical solutions quickly., • Detail-oriented effective communicator with excellent customer-ready documentation and communication skills and ability to develop, use, and socialize document templates to streamline processes., • Ability to provide completion time estimates for a given set of test requirements., • Ability to be hands-on with soldering, assembly, and testing., • Ability to work with very little supervision, prioritize between multiple tasks, meet aggressive deadlines, and work extended hours (as needed)., • Highly responsible and committed to thrive in an energetic, fast-paced, evolving, high growth environment while adhering to aggressive deadlines, and coordinating cross-functional teams., • Strong self-motivation and attitude for personal career growth, willingness to self-learn, and work in new technology domains.Compensation & Benefits, • Salary: $75,000 - $100,000 annual base salary (based on experience and qualification), • Medical, vision and dental insurance, • 401(k) with company match (100% of the first 4% in eligible compensation), • Flexible Spending Account, • 2 weeks paid vacation, • 1 Week sick pay, • 10 company holidays x3DjWSrEU6

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. As an EMC Engineer, you will be responsible for ensuring Avionics components are designed to endure the harsh electromagnetic environmental effects of interplanetary space. You will play a pivotal role in defining the design criteria for state-of-the-art avionics and electro-mechanical systems for the lunar surface with a strong focus on electromagnetic compatibility, in-space charging effects, and interdisciplinary requirements. You will be joining a company at the ground-level and have immense influence over the future of lunar exploration. What you'll do: • Collaborate closely within cross-functional Engineering teams to capture requirements, lead design trades with respect to EMI/EMC, and integrate the design into the rover systems., • Contribute to full avionics and electro-mechanical systems/subsystems from system to component level with specific focus on E3 design criteria and operational/survivability requirements., • Analyze and contribute to designs relating to the effects of circuit and power system grounding architectures, structural electrical bonding, circuit isolation, shielding effectiveness, radiated/conducted emissions and susceptibility, near field/far field electromagnetics, transient protection, signal and power integrity, and general RF compatibility., • Troubleshoot EMI issues from board to system level., • Operate and automate a variety of EMI, RF, and electronics test equipment (spectrum analyzers, network analyzers, signal generation, oscilloscopes) within the context of avionics development and in house EMC testing., • Create and update technical documentation including command media, system diagrams, schematics, interface control documents, procedures, work and/or build orders, vendor and payload requirements, and test/anomaly reports., • Bachelor’s degree in electrical engineering, physics, or other engineering discipline., • 5+ years of experience in EMI/EMC requirements, analysis, design, and testing for spacecraft systems and/or avionics component design (academic and personal projects apply)., • Proficient in the use of lab equipment such as oscilloscopes, multimeters, signal generators, logic analyzers, etc., • Proficient with Analytics/Modeling/Simulation tools such as LTSpice, and experience with electrical circuit analysis using simulation tools such as Spice or equivalent., • Familiarity with SMC-S-016 testing requirements, and testing per SMC-S-016., • Knowledge of electrical safety and EMC commercial compliance standards and/or testing., • MIL-STD-461 experience across the full range of EMC test (radiated susceptibility, radiated emissions, conducted susceptibility, conducted emissions) standards., • Experience in high power avionics system designs for spacecraft including: LDO Regulators, Buck/Boost converters, power line filters and various spacecraft grounding schemes for high voltage systems., • Experience in motor controller system designs for brushless DC motors (BLDC) and permanent magnet synchronous motors (PMSM) in both low and high voltage systems., • Ability to read, interpret and follow circuit schematics, PCB layouts, engineering drawings, BOMs, cable harnesses, wiring schematics, interface diagrams, layout drawings, mechanical drawings, and CAD software., • Creative problem solver that can assess risk and make collaborative design and development decisions., • Strong presentation experience in highly technical design forums and reviews (Preliminary Design Reviews, Critical Design Reviews, Flight Readiness Reviews, etc.)., • Experience with NX or similar CAD software including electrical harness routing., • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set up reimbursement, • Fully flexible and remote friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Once a month social hour on-site with food and drinks

Job DescriptionDescriptionAs a Senior Electrical Engineer (Digital Baseband), your core responsibility will be to own architecture, design, and bring up of custom digital circuit boards for radio basebands. You will work with RF engineers, RF software engineers, mechanical engineers, and others to meet test needs across a wide range of capabilities. You will work on uplink and downlink SDRs utilizing FPGAs, high speed digital peripherals, DACs, ADCs, and interfaces to other systems. You will have the opportunity to contribute to all aspects of spacecraft electronics development, from architecting new systems to building and operating them. Responsibilities • Design and bring up high speed digital baseband systems supporting software defined radios, • Contribute to new spacecraft RF architecture trades, • Develop circuit boards (schematic and layout) for spacecraft, with an emphasis on digital electronics, • Perform rigorous analyses and simulations of digital devices and systems, • Perform development testing of hardware in the lab, from single digital designs to entire RF systems, • Derive baseband hardware design requirements from system-level specifications, • Evaluate and design for mitigation of desense, EMI, EMC, and co-existence issues., • Own hardware through qualification and flight operations, • Establish and maintain high technical standards and mentor less experienced engineers, • Bachelor’s degree in Electrical Engineering or related field, • 5+ years professional experience designing digital electronics, • Proficiency with electronics component selection, analysis, simulation, schematics, and layout, • Knowledge of digital circuit design concepts including signal integrity, timing, etc., • Strong electrical engineering fundamentals, • Experience troubleshooting electronics problems at the board level or system level, • Ability to communicate technical challenges, explain rationale, and resolve concerns, • Familiarity with high-speed digital simulation software, such as Hyperlynx, Sigrity, SiWave, ADS, or similar Preferred Skills and Experience • Experience with Altium Designer, • Familiarity with electromagnetic sim tools such as ADS, HFSS, CST, Genesys, or similar, • Layout experience with large BGA ICs, • Experience with radiation-tolerant digital design including component selection, derating, SEU mitigation, and fault-tolerant architecture, • Familiarity with common RF protocols like SRS4, DVBS-II, and CCSDS, • Experience with multi-gigabit SERDES design, simulation, and testing, • Experience designing high speed digital interfaces such as DDR4/5, PCIe, RGMII/SGMII, Ethernet, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our team. The Avionics team is responsible for all aspects of the electrical systems and hardware on Astrolab’s electric rover vehicles and ground support equipment. We work collaboratively across engineering disciplines to deliver exceptionally capable, reliable electronics that support flight and mission operations. The Staff Mixed Signal Electrical Engineer will lead the development, verification, and integration of mixed signal avionics hardware for Astrolab rovers. This role owns mixed signal PCBA architecture and execution from clean sheet design through qualification and flight. The ideal candidate has 10+ years of experience in complex electrical hardware design, including schematic capture, PCB layout, analysis, and testing in high-reliability environments. This position will report to the Director of Avionics Engineering and will be based in our Hawthorne, CA office. What you'll do: • Own mixed signal PCBA development from clean sheet through qualification and flight, • Define requirements, architectures, and con ops in collaboration with cross-functional engineering teams, • Perform schematic capture and PCB layout of complex power, digital, and analog circuit PCBAs using Altium Designer, • Design analysis, including power, size, mass, Monte Carlo tolerances, signal integrity, and reliability-related., • Lead PCBA design verification testing, qualification testing, and system integration efforts, • Drive and present design reviews for interdisciplinary audiences, providing technical leadership and clear trade recommendations, • Support manufacturing, environmental testing, and flight operations as needed What's Prepared You: • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent, • 10+ years of experience in power, digital, and analog electronics design, including schematic capture, PCB layout, analysis, and testing, • Design proficiency with voltage regulators, FPGAs, SoCs, high-speed data interfaces, precision analog instrumentation, clocking architectures, and mixed signal integration, • Experience taking hardware from early architecture through qualification, production, or flight, • Skilled at performing circuit simulations and analysis in SPICE, Excel, and other tools for analog behavior, signal integrity, size and mass, and power optimization, • Proficiency with electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, and soldering tools, • Demonstrated success operating with ownership in dynamic, fast-paced environments Additional Responsibilities, • Design for space environments including radiation impacts, mitigation strategies, and long duration reliability considerations Benefits and Perks • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set up reimbursement, • Fully flexible and remote friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Once a month social hour on-site with food and drinks

Job Description Lead Avionics Engineer – Drive Next-Generation Spacecraft Systems! El Segundo, CA | On-site Opportunity Summary A seed-stage deep-tech startup is developing next-generation platforms that enable mobility, maneuverability, and in-space resource capability for a wide range of orbital missions. The company is focused on advancing spacecraft performance through novel propulsion and onboard systems, supporting missions that require reliability in demanding orbital environments. The engineering team brings experience across spacecraft development, launch systems, and high-reliability hardware programs, and the company is entering a rapid build and test phase. As a Lead Avionics Engineer, you will own the avionics and electronic system architecture across the spacecraft platform. You will guide design decisions from concept through hardware bring-up and flight readiness, working across flight computers, power systems, communications, and supporting electronics. This role is built for someone who wants to take true ownership, move quickly, and help shape the technical direction of a company that is building hardware to operate in some of the most complex mission environments in space. About Us We are a venture-backed space technology startup building high-performance spacecraft platforms that support in-space mobility and future propellant generation capabilities. Our mission is to expand what is possible in orbit by pairing advanced propulsion with tightly integrated spacecraft systems. Operating from Southern California, we combine a first-principles engineering culture with a fast-moving startup mindset, giving engineers real ownership over design, testing, and mission execution. Job Duties • Lead avionics architecture, design, qualification, and integration across the spacecraft platform, • Develop flight-ready electronics from concept through system integration and mission operations, • Translate operational needs into technical requirements and system-level trade studies, • Design and prototype flight computers, power distribution, networking, and comms hardware, • Perform structured debugging, fault isolation, and root-cause investigations, • Build hardware-in-the-loop test environments and validation frameworks, • Ensure reliability, testability, and compliance across mission-critical systems Qualifications • Bachelor’s degree in electrical engineering, aerospace engineering, computer engineering, computer science, or related field, • 5+ years of experience designing avionics or space-grade electronics, • Direct experience delivering flight-qualified or mission-critical electronic systems, • Familiarity with government, aerospace, or industry hardware standards, • Hands-on background in circuit design, debugging, and test equipment use, • Proficiency with PCB design tools such as Altium or similar platforms, • Strong system-level troubleshooting capability across hardware and software interfaces, • Experience working in fast-paced engineering environments with significant ownership, • Strong technical foundation supported by first-principles problem solving Preferred Experience • Avionics or electronics work on spacecraft, launch vehicles, satellites, or deep-tech platforms, • Experience supporting integration, environmental testing, or qualification campaigns, • Background working with space-relevant system constraints such as radiation tolerance, thermal limits, EMI/EMC, or mission reliability engineering, • Experience with PCB layout and schematic design tools beyond basic use, • Familiarity with aerospace standards including MIL-spec, ECSS, or NASA-derived guidelines, • Prior exposure to early-stage startup environments or small engineering teams Why Join Us • High-ownership role with direct impact on flight hardware, • Opportunity to help shape the architecture of next-generation spacecraft systems, • Tight-knit, high-caliber team working on complex and meaningful technology, • Build in an environment where decision-making is fast and engineering leads the way Compensation Details $175,000 - $215,000

Job DescriptionDescriptionAs Senior Avionics Manufacturing Engineer (Helios vehicle), you will work across disciplines to deliver a suite of avionics for our Helios vehicle. Helios is the kick stage transforming access to MEO, GEO, Cislunar, and beyond. Paired with a medium-lift launch vehicle, Helios provides same day delivery for large payloads from LEO to high-energy orbits — delivering heavy-lift performance at medium-lift costs. Leveling will be commensurate with experience. Responsibilities • Own Helios avionics as a product in the manufacturing organization. Serve as primary point of contact for both flight hardware and ground support equipment., • Worked with Helios program management to define schedules and deliverables., • Own mechanical assembly of Helios avionics system by working with subject matter experts on the avionics manufacturing team (PCBAs, RF, optics, harnessing, batteries)., • Design the manufacturing process and write manufacturing procedures for mechanical assembly of the overall avionics syst guide technicians building avionics hardware., • Collaborate with design engineers on DFM of Helios avionics., • Collaborate with cross functional teams on quality and long-term reliability., • Ensure the timely delivery of avionics components to Integration., • Provide day-to-day support for the production floor, resolving build issues, updating work instructions, and improving yields., • Bachelors' degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field, • 5+ years of demonstrated development or manufacturing experience with mechanical aspects of electronic and/or optical assemblies., • Proven experience leading cross-functional teams to deliver technically complex projects, • Highly proficient in mechanical design using Siemens NX, • M.S. degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, or related field, • 6+ years of experience in spacecraft avionics manufacturing. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Flight Software Engineer at Impulse, you will be responsible for the design, development, and integration of the software that powers our Space Vehicles. You will work closely with avionics engineers, GNC engineers, propulsion engineers, and other cross-disciplinary teams to deliver high-reliability, high-performance software for in-space transportation. Responsibilities • Contribute to the design, implementation, integration, and verification of software for:, • Guidance, Navigation, and Control (GNC) algorithms, • Command and telemetry handling, • Mission sequencing, autonomy, and fault management, • Closed-loop control of propulsion, attitude control, and other time-critical systems, • Implement features for Impulse’s real-time flight software framework to meet deterministic performance requirements in space environments., • Develop detection and mitigation algorithms for anomalies such as sensor failures, actuator malfunctions, or radiation-induced faults., • Direct and participate in code reviews, ensuring compliance with software safety, reliability, and maintainability standards., • Support mission operations and troubleshoot real-time issues during ground integration, environmental testing, and on-orbit operations. Minimum Qualifications • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, or related degrees, • 4+ years writing C/C++ code for an embedded system or vehicle of some kind (robot, car, drone, spacecraft, etc), • Demonstrated understanding of computer architecture, operating systems, data structures, and computer networking, • Experience with Real Time Operating Systems (RTOS) or with Embedded Linux, • Experience using version control, test cases, and other software best practices Preferred Skills and Experience • Proven track record delivering flight software for spacecraft— including launch vehicles, OTVs, upper stages, or other in-space propulsion systems., • Familiarity with NASA cFS, ROS2, or custom middleware for space applications., • Expertise in designing software for deterministic timing and hard real-time constraints. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description About Rainmaker Rainmaker is pioneering a modern cloud seeding system to solve water scarcity and inclement weather problems. We develop and incorporate radar validation, weather-resistant UAS, numerical weather modeling, and sustainable cloud seeds into an effective precipitation enhancement solution. The Engineering Team The Engineering team at Rainmaker works on our UAS, dispersion payload, and in-situ/remote sensing systems. If you are interested in working in an extremely innovative and fast paced environment, where your work directly makes an impact and difference in our operational system, this is a fantastic opportunity. The Role In this role you will be reporting directly to the Lead Electrical Engineer and will be working on mission critical subsystems for our UAS platform. What You'll Do: * Rapid Hardware Prototyping: Design and build functional prototypes for UAS subsystems, iterating quickly based on flight test feedback and mission requirements. * PCB Design: Create schematic and layouts for power distribution, sensor interfaces, payload controllers and communication modules using Altium or KiCad. * Board Bringup and Testing: Assemble, debug, and validate new PCBs; develop test procedures and fixtures to verify functionality and reliability under flight conditions. * Documentation: Write technical documentation, prepare fabrication and assembly data for manufacturers. * Collaborate with cross-functional teams: Mechanical engineers, software engineers, and manufacturing Required Qualifications: * Experience with PCB design software (Altium or KiCad) * Familiarity with embedded systems and microcontrollers (Raspberry Pi, NVIDIA Jetson, STM32, ESP32, RP2040) * Embedded Programming Experience (Rust, Arduino, Python, or C++) * Familiarity with power electronics circuits. (Buck and boost converters, BMS, power * switching circuits) * Experience with EE Lab equipment (Oscilloscope, Power Supply, DC Load, etc.) * Experience applying technical ability outside of the classroom (Personal projects, research, extracurriculars, or prior internship/work experience) Rainmaker is an Equal Opportunity Employer; employment with Rainmaker is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Rainmaker participates in E-Verify. To learn more, including your rights and responsibilities, please visit E-Verify.gov.

Job DescriptionDescriptionVenturi Astrolab, Inc. (Astrolab) is pioneering new ways to explore and operate on distant planetary bodies. We are singularly focused on designing, building, and operating a fleet of multi-purpose commercial planetary rovers to extend and enhance humanity’s presence in the solar system. We are seeking motivated, creative, and exceptional people to join our world-class team. The Avionics team is responsible for all aspects of the electrical systems and hardware on Astrolab’s electric rover vehicles and ground support equipment. We work collaborative with all teams at Astrolab to provide exceptionally capable and reliable electronics to serve our missions. The Principal Power Electrical Engineer will participate in all aspects of the development and test of power avionics hardware for Astrolab rovers. The ideal candidate has 15+ years of experience in power electronics design, including schematic capture, PCB layout, and testing. This position will report to the Director of Avionics Engineering and will be based in our Hawthorne, CA office. What you'll do: • Own the development of vehicle power electronics from clean sheet to flight. For example: solar power conversion, battery management systems, power distribution and load management, voltage regulators, etc, • Develop and implement PCBA requirements, use-cases, and system integration, • Schematic capture and PCBA layout for power and analog circuits in Altium Designer, • Design analysis including power, size, mass, Monte Carlo tolerances, and reliability related, • PCBA design verification testing, qualification testing, and system integration testing, • Lead design reviews for inter-disciplinary audiences, • Bachelor of Science degree in Electrical Engineering, Computer Engineering, or equivalent, • 15+ years of experience in power electronics design including schematic capture, PCB layout, and testing, • Expertise in solar power, voltage regulation, load management, fault protection, power transmission, analog instrumentation, and digital circuits, • Skilled at schematic capture and layout of complex PCBAs, • Skilled at performing circuit analyses in SPICE and Excel, • Proficiency with basic electronic lab equipment such as power supplies, oscilloscopes, DMMs, signal generators, soldering iron, etc, • Join a team of best-in-class engineers building the foundation of planetary surface exploration, • Equity ownership in the company, • Comprehensive health benefits, including medical, dental, vision, and mental health support, • 401(k) plan with company match, • Flexible PTO and parental leave, • Home office set up reimbursement, • Fully flexible and remote friendly work environment, • Weekly lunch stipend, plus complimentary snacks and beverages on-site, • Once a month social hour on-site with food and drinks

Job Description Senior Avionics Engineer - Take Charge of Cutting-Edge Spacecraft Technology! El Segundo, CA | On-site Opportunity Summary Join a pioneering company that is redefining the boundaries of space exploration with its innovative propulsion technology. Our team is composed of top engineers with experience from leading aerospace companies, and we're on a mission to broaden access to high-energy orbits. As a Senior Avionics Engineer, you will have an exciting opportunity to lead the development of critical technology for our spacecraft, including our upcoming vehicle scheduled for launch in early 2026. With a focus on high agency and ownership, this role promises growth and expanded responsibilities as we continue to evolve. About Us We are at the forefront of space technology, developing groundbreaking spacecraft designed for the most challenging missions. Our vision is to revolutionize access to orbits ranging from LEO to cislunar space using our proprietary propulsion systems. Headquartered in Los Angeles, our innovative approach is backed by top-tier venture funding, allowing us to push the envelope in space exploration. Job Duties • Spearhead the entire electrical design process, including testing, qualification, and integration for our spacecraft, • Drive avionics development from initial concept through to flight-ready systems and integration, • Manage the design and interfacing of avionics, encompassing requirements capture, component selection, analysis, and system-level trade-offs, • Prototype and validate flight computers, power systems, communications, and electronic systems, • Ensure system reliability through root cause and corrective action investigation, debugging, and documentation, • Conduct hardware-in-the-loop testing and develop testbeds for system validation, • Lead efforts to comply with relevant government and safety standards Qualifications • BS in aerospace engineering, electrical engineering, computer science, computer engineering, or a related field, • 2+ years of experience in developing space electronics and avionic systems, • Proven track record in architecting and qualifying avionics systems for spaceflight, • Familiarity with government and MIL-spec standards, • Hands-on experience in circuit design and using electronics test equipment, • Experience with Altium Designer or similar tools, • Proficient in troubleshooting electronics at both the board and system levels, • Background in a fast-paced startup environment or equivalent experience, • Strong engineering foundation with a first-principles approach to problem-solving Preferred Experience • Experience with Altium Designer or similar software is a plus, • Familiarity with relevant government and MIL-spec standards Why Join Us • Excellent benefits and a strong sense of ownership in the work, • Venture-backed and well-funded, providing stability and room for growth, • Opportunity to work alongside industry-leading experts in a dynamic and innovative environment Compensation Details $120,000 - $180,000

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Position Overview We are seeking a Lead Integration & Test Engineer with deep expertise in the integration and verification of warhead systems into complete hypersonic missile vehicles. This role focuses on leading the safe and reliable integration of warheads (including energetics, fuzing, safe-and-arm devices, and structural interfaces) with missile airframes, radars, propulsion, avionics, and thermal protection systems. You will own end-to-end integration & test strategies from subassembly through full vehicle level, supporting ground qualification, environmental testing, and flight test campaigns for next-generation hypersonic strike weapons. You will serve as the technical authority on warhead-vehicle integration and test, collaborating closely with design, manufacturing, propulsion, radar, quality, and mission assurance teams to meet stringent DoD standards and mission requirements. Key Outcomes for 2026 • Deliver a production ready integration & test process in Rio Rancho New Mexico, • Develop a plan to scale from low-rate initial production to full volume production supporting thousands of units per year, • Support a rapid test flight cadence to validate vehicle capability, • Develop safe integration and testing processes for the vehicle that ensure operator safety, • Lead warhead-to-vehicle integration activities including mechanical mating, electrical interface verification, fuze/S&A installation, and safe separation testing., • Develop and execute comprehensive vehicle-level Integration & Test plans covering functional checkout, ordnance arming sequences, environmental qualification, and system verification., • Design and commission integration tooling, test fixtures, and automated test equipment for warhead handling and full missile assembly., • Oversee environmental stress screening (thermal, vibration, shock, EMI/EMC) and functional performance testing of integrated warhead-vehicle systems., • Support flight test preparation, range coordination, pre-flight checkout, and post-flight data analysis and anomaly resolution., • Perform root-cause investigations and corrective actions for integration and test anomalies using FRACAS and fault tree analysis., • Ensure full compliance with explosive safety standards, DoD 6055.09, MIL-STD-810, and mission assurance requirements., • Mentor integration & test engineers and lead cross-functional I&T teams during build and test campaigns. Education: • 8+ years in integration and test for complex aerospace or defense systems., • 4+ years specifically working with warheads, munitions, or energetic systems integration., • Strong experience with ordnance handling, safe-and-arm devices, and energetic materials integration., • Proficiency in test automation (LabVIEW, Python, MATLAB), data acquisition systems, and telemetry., • Hands-on with environmental testing and ordnance functional verification., • Requirements management and configuration control., • Direct experience on DoD missile or hypersonic warhead programs., • Background in fast-paced development environments, • Knowledge of insensitive munitions and advanced warhead designs., • Prior flight test support at ranges, • Proven ability to lead technical teams in high-stakes, safety-critical environments., • Excellent communication and presentation skills for executive and customer briefings. Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support. High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity. ITAR Requirements All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description Flight Software Engineer – Build Next-Generation Spacecraft Systems for High-Energy Missions! El Segundo, CA | On-site Opportunity Summary Join a venture-backed aerospace startup developing advanced spacecraft designed to operate in demanding orbital environments. This role sits at the heart of vehicle development, where software enables guidance, autonomy, communication, and overall mission execution. You will work closely with founders and a highly technical team to architect and deploy flight software that supports real-time, safety-critical spacecraft operations. This is a high-ownership opportunity for an engineer who thrives in fast-moving environments and wants to see their work move quickly from development to flight. You will contribute across the full lifecycle of vehicle software, from architecture and implementation through integration, testing, and mission support, helping shape both the product and the engineering culture as the company scales. About Us We are an early-stage space technology company building advanced in-space transportation and spacecraft systems aimed at expanding access to complex orbital missions. Founded by engineers with deep experience delivering flight-proven systems, the team combines startup speed with disciplined engineering practices to bring high-performance hardware and software together. Our environment emphasizes first-principles thinking, technical ownership, and rapid iteration toward real mission outcomes. Job Duties • Architect, develop, and deliver core flight software to meet system performance and reliability requirements, • Design, implement, integrate, and verify software supporting Guidance, Navigation, and Control (GNC) functions, • Develop real-time systems for command and telemetry handling, mission sequencing, autonomy, and fault management, • Implement deterministic software features within a real-time flight framework for spacecraft operations, • Develop closed-loop control software supporting propulsion, attitude control, and other time-critical vehicle functions, • Write clean, efficient, and testable code for embedded and safety-critical applications, • Build communication interfaces and networking protocols including Ethernet, UDP, multicast, and similar technologies, • Collaborate closely with avionics, propulsion, GNC, and hardware teams across the full development lifecycle, • Design and maintain embedded software targeting microcontrollers and vehicle compute systems, • Develop detection and mitigation algorithms for anomalies such as sensor failures, actuator issues, or radiation-induced faults, • Participate in design reviews and code reviews, ensuring strong safety, reliability, and maintainability practices, • Support hardware-in-the-loop testing, system integration, environmental testing, and mission readiness activities, • Troubleshoot and resolve real-time issues during testing and operational phases, • Maintain clear documentation including architecture, ConOps, and software interface definitions Qualifications • Bachelor’s degree in Computer Science, Computer Engineering, Aerospace Engineering, Electrical Engineering, or similar technical discipline, • 2+ years of software development experience, preferably involving embedded systems or complex vehicles, • Strong experience writing C/C++ for embedded or real-time applications, • Solid understanding of operating systems, computer architecture, data structures, and networking fundamentals, • Experience with version control systems and modern software development practices, • Familiarity with Real-Time Operating Systems (RTOS) or Embedded Linux environments, • Understanding of microcontroller architectures and hardware interfaces, • Strong debugging, performance optimization, and root-cause analysis skills, • Ability to move quickly and contribute across multiple engineering disciplines in a startup setting, • U.S. Person status or eligibility to obtain required export licensing Preferred Experience • Hands-on experience delivering flight or vehicle software for spacecraft, launch vehicles, drones, robotics, or autonomous systems, • Background in mission operations, on-orbit support, or integrated system testing, • Familiarity with NASA cFS, ROS2, or similar aerospace middleware frameworks, • Experience designing deterministic systems for hard real-time constraints, • Exposure to safety-critical software development processes or formal certification environments, • Experience with additional tools or languages such as Python, Rust, Git-based workflows, Grafana, or comparable platforms, • Participation in integration, testing, launch, or operational phases of a space vehicle program Why Join Us • Opportunity to build flight-critical systems with real mission impact, • High level of technical ownership and influence, • Fast-paced startup environment with strong engineering autonomy, • Direct collaboration with experienced aerospace founders and technical leaders, • Opportunity for long-term growth as the company scales, • Work on cutting-edge space technology pushing the boundaries of orbital operations, • Equity participation and the ability to help shape a growing team Compensation Details $135,000 - $225,000 #LI-AV

Job DescriptionDescriptionAs a Senior Propulsion Component Engineer (Electromechanical) at Impulse, you will own all aspects of component design from concept to product realization, while working closely with a fast-paced, agile team that strives to make a high-performance spacecraft from a clean sheet design. Responsibilities • Design propulsion system electromechanical components including linear and rotary actuators and motors, • Perform integrated system trades on power systems, actuation rates, and force margins to arrive at optimal solution for flight vehicle, • Own all aspects of component design from initial concepts to product realization, • Generate detailed CAD models and manufacturing drawings, • Perform fluid, thermal, and structural analysis as required, • Establish assembly procedures and work hands-on with technicians to refine this process, • Define and support rigorous component development and qualification testing, • Resolve technical issues with innovative and resourceful solutions Minimum Qualifications • Bachelor’s degree in engineering or related field, • 5+ years of demonstrated experience in high power density motor and/or actuator design, • A strong understanding of electromechanical component design including: force/torque margin determination, materials and motor selection, wear, electronics, motor control and software/firmware interfaces., • Hands-on experience working with fluid, electrical and mechanical systems, • Demonstrated proficiency in CAD software with ability to learn new tools, • Demonstrated ability in requirements definition, conceptual design, procurement, fabrication, assembly and testing of hardware Preferred Skills and Experience • Experience designing and operating high reliability, high performance hardware, • Experience with high-power density and vacuum-rated components, • Experience in a startup or agile development environment, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an Avionics Test Engineering Intern, you will support the testing and integration of spacecraft avionics systems. As an intern, you will gain hands-on experience working with flight electrical devices ranging from individual circuit boards to full spacecraft systems. You will assist engineers in developing, running, and improving test systems that ensure hardware is ready for spaceflight. This role offers exposure to multiple engineering disciplines, test equipment, and the full spacecraft development lifecycle — from design to launch. Responsibilities • Develop end-to-end test systems that validate flight electrical hardware including circuit boards, optical devices, and electromechanical assemblies, • Support the setup, operation, and troubleshooting of electrical test equipment and ground support hardware, • Develop automated testing solutions to collect, analyze, and document test dataBuild and maintain test systems, racks, and setups for component level and integrated testbeds under engineer supervision, • Collaborate with avionics, propulsion, GNC, software, and integration engineers to verify complete test coverage of existing and new test systems., • Contribute to pre-launch test activities and learn how spacecraft are prepared for flight Minimum Qualifications • Recent completion or currently pursuing a Bachelor’s degree in Electrical Engineering, Computer Engineering, Aerospace Engineering, or related field, • Strong academic foundation in circuits, electronics, or software, • Hands-on project, research, or lab experience involving hardware integration or testing, • Basic understanding of instrumentation, data acquisition, or troubleshooting methods, • Strong analytical, problem-solving, and communication skills, • Ability to work collaboratively in a fast-paced team environment Preferred Skills and Experience • Experience working on an engineering project involving vehicles or hardware (spacecraft, rockets, drones, cars, robotics, etc.), • Experience designing PCBs using Altium Designer or similar PCB design tools (KiCAD, Eagle etc.), • Experience writing automation software and data post-processing in Python (or another language like C, Matlab etc.), • Exposure to environmental test equipment (vibration tables, thermal chambers, etc.), • Experience with electrical lab test equipment such as DMMs, oscilloscopes, DAQs, power supplies etc., • Knowledge of safe handling practices for electrical or high-reliability hardware, • Interest in spacecraft systems and flight hardware testing Additional Requirements: • Willing and able to work on-site in Redondo Beach, CA for the duration of the internship Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Vehicle Systems Division (VSD) sits at the center of the ideas and data behind current and future systems supplying innovative research and development; technical evaluations during the acquisition process; conceptual and detailed design; assembly, integration, and test; and operational support. Comprised primarily of highly-trained mechanical and aerospace engineers, VSD provides national expertise in the areas of vehicle engineering; guidance, navigation, and controls; robotics; electro-mechanical devices; embedded systems; fluid mechanics; propulsion; thermal control; orbital mechanics; mechanisms; structures; structural dynamics; and dynamic environments. The Vehicle Engineering and Integration Department (VEID) is part of the Vehicle Systems Division, the premier satellite and launch vehicle technical organization within the Aerospace Corporation. The Space Vehicle Engineer (Associate Member of Technical Staff - Interdisciplinary Vehicle Engineering & Integration) candidate should show interest and some knowledge in Space Vehicle (SV) generalist and SV Vehicle Mass and Mechanical Properties. You will work within the Vehicle Engineering and Integration Department and with the Aerospace Program Office on multiple spacecraft programs involving AI&T, multi-disciplinary project management, and generalist spacecraft hardware engineering. In this position you will act as technical authority, lead interfaces between customers' and Aerospace technical staff, and assist the management team with business development. This is a full-time on-site position in El Segundo, CA. What You'll Be Doing * Provide spacecraft engineering support to multiple programs in Generalist Space Vehicle Engineer, Vehicle Mass and Mechanical Properties, and project management * Provide analysis and test support to Vehicle Mass and Mechanical Properties * Oversee multidisciplinary system-level acquisition, design, manufacture, integration and test activities for space vehicles and vehicle interfaces to launch vehicle and ground systems * Provide technical leadership in identifying, mitigating, and solving applicable satellite and subsystem risks and issues * Leading and coordinating ETG technical teams to participate in internal research and development and technology transition projects in support of national security space customers * Develop and maintain strong, effective working relationships with internal and external customers and contractor counterparts * Generate and deliver written reports, risk assessments, recommendations, and presentations to the customer and Aerospace management * Function as the technical focal point between the Government Program Office and the contractor as the factory liaison for spacecraft and AI&T operations. * Travel to contractor and vendor facilities, as required What You Need to be Successful Minimum Requirements: * Bachelor's degree in a STEM field * 1 year or more of applicable professional experience in one or more of the following areas: mass properties, mechanical design and analysis, design for manufacturing, optical-mechanical systems, environmental testing, propulsion, mechanisms, guidance and controls, thermal engineering, structures, or aerospace engineering * Knowledge of space vehicle bus and/or payload subsystems and interfaces * Willingness to occasionally travel and to work off-business hours to support customer needs, approximately 10% (as required) * Ability to obtain and maintain a Top Secret/SCI security clearance with CI polygraph, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. How You Can Stand Out It would be impressive if you have one or more of these: * Advanced degree in engineering, mathematics, science, or other technical discipline * Experience in a laboratory / AI&T / Factory setting * Experience in one or more of the following areas: electrical integration and testing, test hardware/software, electrical design, power systems, ground support equipment (electrical, mechanical, optical, test, etc.)is strongly preferred * Experience with hardware testing * Knowledge of satellite test standards We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $77,100.00 - $115,600.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. At the Mission Payloads Division (MPD), we are pioneers in remote sensing systems that guide our country's space enterprise. Our talented and dynamic people create and flourish in electronics, sensors, radar, artificial intelligence (AI), and advanced data network domains. We boldly advance technology through our research and development and then forward to demonstration and integration. With innovative laboratories and prototyping, MPD delivers groundbreaking results. We guide our Department of Defense, intelligence community, and civil clients to enhance national productivity and security and tackle the most critical missions. Bring your intelligence and creative spirit and join us at MPD! The Analog and Power Systems Department (APSD) has expertise in the areas of power electronics / analog engineering and power systems engineering. APSD provides world class corporate expertise that performs analog circuit design, circuit analysis, hardware test, hardware troubleshooting, rapid prototyping, and system level modeling in support of critical design verification, analysis verification, anomaly resolution, and systems verification efforts. We are looking for an experienced Power Systems Engineer that is a self-starter, strong team player with emotional intelligence, effective communicator (both written and verbal), technical leader, and mentor. APSD not only plays the role of solving highly complex technical problems, but also serves as an integral component to complementary organizations and program customers to support the goals and objectives of integrated teams across the corporation, customer community, and community of space hardware contractors / suppliers. Work Model: This position will be a fulltime, on-site work model in El Segundo, California. What You'll Be Doing Provide power system level energy balance analysis, energy depletion analysis, and harness voltage drop analysis in support of the development of satellite and launch vehicles, up to and including launch and initialization (state of health and anomaly support). Provide technical reports in support of Space Systems Command (SSC), National Reconnaissance Office (NRO), National Nuclear Security Administration (NNSA), and Civil Space programs * Create system level power models and conduct independent reviews of contractor space vehicle or launch vehicle systems. Provide analysis that identifies system margin and operational constraints * Collaborate on a multidiscipline team of SMEs to provide system level analysis data products * Write clear and concise reports that document your work. * Deliver presentations to customers and leadership. * Serve as the customer's Subject Matter Expert by providing technical support to program offices in support of design verification, design conceptualization, system sizing, system state of health checks, and anomaly root-cause / corrective action investigations. Maintain analysis and design standards for the space industry * Be an effective technical contributor to a multidiscipline team of SMEs * Serve as the technical conscious of the Government and Civil customer to ensure mission success * Review and assess internal and external system designs (power budget / power margin reports / day in the life scenarios - perform independent analysis and make technical assessments) * Identify system / design deficiencies and provide solutions. * Mentor and provide technical training for early career engineers. * Deliver written and verbal reports to peers, program offices, and leadership. * Duties, responsibilities and activities may change, or new ones may be assigned as needed What You Need to be Successful - Engineering Specialist Minimum Requirements: * Bachelor's degree in a STEM field (preferably Electrical Engineering) or equivalent * 8 or more years of increasingly responsible and related engineering experience * Ability to lead teams in the development of system level analysis tools * Demonstrated emotional intelligence * Ability to mentor and provide guidance to more junior engineers * Demonstrated proficiency in the use of system modeling software (Matlab, JAVA, or Simulink) * Demonstrated experience in providing technical advice to management * Power Systems Design * Familiarity with bus power regulators * Ability to build a system level model of a DC/DC power bus with loads and power sources * Ability to analyze and design systems in a collaborative multidiscipline environment * High level of proficiency in circuit analysis, test, and troubleshooting. * Willing to travel [occasionally to work location or customer / contractor site/domestically] approx. 10% to 25% of time if required. * This position requires the ability to obtain and maintain a security clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. * Eligibility to obtain an SCI Top Secret clearance In addition to the above, the minimum requirements for the Senior Power Systems Engineer include: * Advanced degree in a STEM field (preferably Electrical Engineering) or equivalent * 12 or more years of increasingly responsible and related engineering experience * Strong background and capability in satellite and / or launch vehicle power systems * Familiarity and/or knowledge on how to review and evaluate energy balance analyses across multiple power system architectures * Distinguished / proven technical leader with an industry track record of success / accomplishments How You Can Stand Out It would be impressive if you have one or more of these: * Successful track record in mentoring junior engineers * Demonstrated experience in leadership of teams in the development of system models * Proficiency in the analysis and design of power system level analysis tools * Master's degree or higher in Electrical Engineering or another related field from an accredited university * Current and active SCI Top Secret clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300.00 - $226,000.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Defense Systems Group (DSG) provides analysis-based decision support to senior leaders on space architectures, policy and strategy, technology development, warfighter capability enablers, systems integration, defense industrial base, and threat reduction to help shape existing and future space missions across the national security space (NSS) enterprise. DSG is unique at Aerospace as it not only directly supports major customers, including the U.S. Space Force, U.S. Space Command, Air Force Materiel Command, and senior leadership at the Pentagon, but also provides a broad range of technical support across the national space enterprise, maintaining vertical responsibilities with customers' portfolios as well as horizontal, matrixed responsibilities across the corporation. Additionally, DSG provides deep technical expertise to the Space Force Space Systems Command (SSC) in the conception, design, acquisition, launch and operations of satellite, launch vehicle, ground control, and range systems. DSG is seeking a qualified Glide Phase Interceptor Engineer (Project Engineer/Senior Project Engineer) who will primarily support the Missile Defense Agency (MDA) Glide Phase Interceptor (GPI) Program with occasional support for MDA Target vehicles. The Glide Phase Interceptor's (GPI) objective is to engage and neutralize hypersonic threats in the glide phase pursuing the Missile Defense Agency's mission to develop and deploy a layered Missile Defense System to defend the United States, its deployed forces, and allies. The selected candidate will have the opportunity to make critical contributions to the GPI program from an early design stage to ensure high reliability and compatibility with the Aegis Weapon System. The selected candidate will work with a combined team of government, private contractors, FFRDC/UARC, International partners, and SETA personnel performing programmatic, mission assurance reviews, engineering design and development, system production and fielding GPIs to advance the US Missile Defense Capabilities. Frequent interaction with other MDA Directorate personnel, contractors, subcontractors, and international personnel is expected. The selected candidate will be required to work full-time, on-site at our facility in either Huntsville, AL or El Segundo, CA. What You'll Be Doing • Directly work with MDA's GPI program office to provide agile mission assurance for design, production, test, and fielding of the Glide Phase Interceptors, • Facilitate communication between Government and Industry partners to coordinate testing requirements, testing assets, identify testing facilities to enable GPI's development, • Lead working group meetings between US and international partners accommodating different time zones, • Coordinate with Aerospace subject matter experts to provide technical advisory services to the Missile Defense Agency, • Lead technical assessments of technical analyses, assess design review of various interceptor subsystems of new interceptor systems design, development, test, production, fielding, and post flight data, • Conduct independent reviews of interceptor unit, sub-system, and system development, acceptance, and qualification testing protocols, technical reports, and analysis reports., • Participate in missile system major milestone reviews What You Need to be Successful Minimum Requirements for Project Engineer - Mission Assurance Engineering: • Accredited bachelor's degree or higher in appropriate engineering, physics, mathematics, or equivalent technical disciplines such as aerospace, electrical, or mechanical or systems engineering, • 8 or more years of experience in launch vehicles or missile systems, • Demonstrated experience coordinating and leading multidiscipline technical teams formed to solve complex technical aerospace challenges., • Familiarity with Military, SMC, and Industry testing standards applicable to launch vehicles, • Experience speaking and presenting technical material to government engineers and leaders., • Willingness to travel to customer or contractor locations up to 20% as required (Continental U.S. with occasional overseas travel), • Active SECRET security clearance or higher, which is issued by the U.S. Government. U.S. citizenship is required to obtain a security clearance. In addition to the above, the minimum requirements for Sr. Project Engineer - Mission Assurance Engineering include: • 12 or more years of experience in launch vehicles or missile systems, • Experience leading investigations for Failure Review Boards, developing mission risk assessments, and recommending feasible mitigation paths, • Demonstrated experience leading working group meetings composed of diverse stakeholders How You Can Stand Out It would be impressive if you have one or more of these: • Accredited Masters or Ph.D. degree in an engineering field, • Expert knowledge in a missile system discipline, • Strong Systems Engineering background, • Experience Supporting the Missile Defense Agency Targets, Quality and Safety, or Interceptor Programs, • Experience with proposals technical evaluations, environmental testing, and testing requirements tailoring We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300.00 - $226,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Defense Systems Group (DSG) provides analysis-based decision support to senior leaders on space architectures, policy and strategy, technology development, warfighter capability enablers, systems integration, defense industrial base, and threat reduction to help shape existing and future space missions across the national security space (NSS) enterprise. DSG is unique at Aerospace as it not only directly supports major customers, including the U.S. Space Force, U.S. Space Command, Air Force Materiel Command, and senior leadership at the Pentagon, but also provides a broad range of technical support across the national space enterprise, maintaining vertical responsibilities with customers' portfolios as well as horizontal, matrixed responsibilities across the corporation. Additionally, DSG provides deep technical expertise to the Space Force Space Systems Command (SSC) in the conception, design, acquisition, launch and operations of satellite, launch vehicle, ground control, and range systems. Join the Special Programs Division (SPD) Spectrum Systems Subdivision in Aerospace's Defense Systems Group (DSG). Deliver national impacts as a go-to Sr. Cybersecurity Architect working in the United States Space Force's esteemed Space Combat Power Program Executive Office. You'll have upstream influence in shaping and defining high-stakes defense contracts critical to national security. Working within a space-focused acquisition program office, you will translate warfighter needs into reality, ensuring the next generation of communication, electromagnetic warfare, and cyber operation systems are mission ready to prevail in a contested space environment. The selected candidate will be required to work full-time on-site at our facility in El Segundo, CA. Aerospace's El Segundo facilities are located next to the Los Angeles Air Force Base, which is the home of the USSF Space Systems Command. What You'll Be Doing • Own the Technical Baseline: Use your expertise to think offensively and defensively about the cybersecurity of space systems and ground systems to ensure the Space Force remains a smart buyer of cutting-edge commercial and defense contractor capabilities., • National Space Enterprise Collaboration: Effectively partner with the acquisition, operational, test, intelligence, and concept design communities to ensure new systems integrate seamlessly with existing space and ground segments., • Mission Analysis & Requirements: Drive operational mission analyses and assessments of alternatives to translate warfighter needs into clear system requirements, statements of work, interface requirements, and performance metrics., • Contractor Oversight & Verification: Lead technical evaluations of vendor proposals and monitor execution to ensure contractor architecture and design meet rigorous performance standards., • Risk & Opportunity Management: Proactively identify and develop handling plans for technical, cost, and schedule risks to ensure mission success., • Test & Evaluation Leadership: Plan and oversee critical test events and review evaluation artifacts to verify that complex system requirements are fully met., • Leverage World-Class Labs: Take the initiative to integrate specialists from Aerospace's Engineering & Technology Group (ETG), using elite laboratory capabilities to solve the nation's most difficult technical challenges., • Technical Authority & Mentorship:Communicate system capabilities and constraints through expert-level reports and briefings, while sharing your knowledge to develop the next generation of engineers. What You Need to be Successful Minimum Requirements Sr. Project Engineer - Cyber Security Architecture: • Bachelor's degree in a technical/STEM-related field such as electrical engineering, computer science, physics, or mathematics., • 12 or more years of experience in the national security space and cybersecurity, • Ability to travel up to 15% of the time., • This position requires an active TS/SCI security clearance and the ability to be granted and maintain accesses to Special Access Programs. Clearances and accesses are issued by the US government. US citizenship is a minimum requirement to obtain a security clearance and receive additional accesses. How You Can Stand Out It would be impressive if you have one or more of these: • Current or previous accesses to Special Access Programs., • An advanced degree in a relevant technical area., • In-depth knowledge of DoD acquisitions, satellite communication systems, electromagnetic warfare, cyber operations, battle management and command & control cloud software architectures, Space Systems Command specs and standards, or a combination thereof. We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $166,400.00 - $249,600.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. At the Mission Payloads Division (MPD), we are pioneers in remote sensing systems that guide our country's space enterprise. Our talented and dynamic people create and flourish in electronics, sensors, radar, artificial intelligence (AI), and advanced data network domains. We boldly advance technology through our research and development and then forward to demonstration and integration. With innovative laboratories and prototyping, MPD delivers groundbreaking results. We guide our Department of Defense, intelligence community, and civil clients to enhance national productivity and security and tackle the most critical missions. Bring your intelligence and creative spirit and join us at MPD The Electronics and Power Systems Department with Analog and Power Systems Department (APSD) has expertise in the areas of electromagnetic interference and compatibility, power electronics / analog engineering, and power systems engineering. EPSD provides world class corporate expertise that performs electromagnetic compatibility tests and evaluations, analog circuit design, circuit analysis, hardware test, hardware troubleshooting, rapid prototyping, and system level modeling in support of critical design verification, analysis verification, anomaly resolution, and systems verification efforts. We are looking for an experienced Analog Circuit Electrical Engineer (Engineering Specialist or Senior Engineering Specialist) that is a self-starter, strong team player, effective communicator (both written and verbal), technical leader, and mentor. EPSD not only plays the role of solving highly complex technical problems, but also serves as an integral component to complementary organizations and program customers to support the goals and objectives of integrated teams across the corporation, customer community, and community of space hardware contractors / suppliers. Work Model: The selected candidate will be required to work full time on-site at our facility at either El Segundo, CA What You'll Be Doing Provide analog circuit design, analysis, and anomaly resolution support to Space Systems Command (SSC), National Reconnaissance Office (NRO), National Nuclear Security Administration (NNSA), and Civil Space programs * Create circuit level models and conduct independent reviews of contractor space vehicle or launch vehicle hardware. Create prototypes to validate existing designs, troubleshoot anomalies, and characterize or develop new designs primarily for space applications. * Write clear and concise reports that document your work. * Deliver presentations to customers and leadership. * Serve as the customer's Subject Matter Expert by providing technical support to program offices in support of design verification, design conceptualization, and anomaly root-cause / corrective action investigations. Maintain analysis and design standards for the space industry * Serve as the technical conscious of the Government and Civil customer to ensure mission success * Review and assess internal and external electrical designs (WCCA review and generation - perform independent analysis and make technical assessments) * Troubleshoot electronic hardware / design deficiencies. * Design / build electronic prototypes that support innovation efforts as well as anomaly investigation and design evaluation efforts. * Mentor and provide technical training for early career engineers. * Deliver written and verbal reports to peers, program offices, and leadership. * Duties, responsibilities and activities may change, or new ones may be assigned as needed What You Need to be Successful - Engineering Specialist Minimum Requirements * Bachelor's degree in a STEM field or equivalent * Eight or more years of increasingly responsible and related engineering experience * Ability to lead teams in the development of prototypes * Capability to mentor more junior engineers * Experience in Circuit analysis tools such as Pspice or LTSpice * Demonstrated experience in providing technical advice to management * Ability to analyze and design circuits utilizing circuit analysis tools. * High level of proficiency in circuit analysis, test, and troubleshooting. * Willing to travel [occasionally to work location or customer / contractor site/domestically] approx. 10% to 25% of time if required. * This position requires the ability to obtain and maintain a security clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. In addition to the above, the minimum requirements for the Senior Engineering Specialist include: * Advanced degree in a STEM field or equivalent * Twelve or more years of increasingly responsible and related engineering experience * Strong background and capability in analog circuit design and power systems * Familiarity or knowledge on how to review and evaluate WCCAs. * Distinguished / proven technical leader with an industry track record of success / accomplishments How You Can Stand Out It would be impressive if you have one or more of these: * Effective track record in mentoring junior engineers * Demonstrated experience in leadership of teams in the development of prototypes * Proficiency in the analysis and design of circuits utilizing circuit analysis tools * Master's degree or higher in Electrical Engineering or another related field from an accredited university * Current and active SCI Top Secret clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300.00 - $226,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The xLab is an organization within the Office of the Chief Technology Officer (OCTO) which is responsible for developing systems-including prototypes, instruments, and pathfinders-to solve complex customer challenges within accelerated timeframes. In today's environment, that means moving fast! Once a new capability is successfully demonstrated, xLab also shares responsibility for establishing an achievable transition path to industry, a program of record, or other applicable destinations. The xLab is seeking an experienced Mission Systems Engineer(Sr. Member of Technical Staff/Engineering Specialist - Enterprise Systems Engineering) with a passion for solving complex problems and driving projects from concept to successful delivery and operations. In this hands-on role, you'll be at the forefront of innovation, working in a collaborative Integrated Product Team with engineers from across the company to identify enabling technologies, lead key system trade-offs, and implement technical solutions that meet critical mission objectives. This is a "roll up your sleeves" systems engineering role, where you'll be deeply involved in systems integration, testing, and delivering real-world solutions that make a difference. If you thrive in dynamic environments and enjoy tackling technical challenges head-on, we want you on our xLab team! This role is full-time, 100% onsite in El Segundo, CA. What You'll Be Doing * Lead systems engineering efforts for prototype development, from concept through integration and testing, in a small, dynamic team environment (10-20 staff) * Serve as the Systems Engineer/Integrator for systems that combine Aerospace payloads and commercial small satellite buses * Manage system architecture, requirements development, and key technical decisions across electrical, mechanical, thermal, software, and other disciplines * Develop and maintain key systems engineering artifacts, including interface control documents, design reviews, and verification/validation plans * Oversee integration, test, and delivery, ensuring system readiness and performance through functional checkout, environmental testing, spacecraft commissioning, and mission operations * Collaborate with local program offices and cross-functional teams to support prototype development and ensure effective technology transfer to government or industry programs * What You Need to Be Successful Minimum Requirements for a Sr. Member of Technical Staff: * Bachelor's degree in engineering, physics, or a related technical field * 5 years of experience in prototype development or technology insertion * Expertise in mission concept development, requirements flow-down, and technology maturation * Experience throughout the full systems engineering lifecycle, with hands-on work in labs * Current Secret clearance with ability to upgrade to TS/SCI In addition to the requirements above, the minimum requirements for an Engineering Specialist are: * 8 years of total experience * Strong skills in technical presentations and reviews (e.g., SRR, PDR, CDR, TRR) How You Can Stand Out It would be impressive if you have one or more of these: * Advanced degree in engineering, physics, or related technical field * Strong technical foundation in space missions and associated ground systems * Broad hands-on design and test experience across multiple technical disciplines (e.g., electrical, software, thermal) * Experience leading multidisciplinary technical teams through system design and delivery * Familiarity with multiple U.S. government space mission areas * Experience developing advanced technology demonstration systems and space security programs * Current TS/SCI clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $100,300.00 - $175,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. At the Mission Payloads Division (MPD), we are pioneers in remote sensing systems that guide our country's space enterprise. Our talented and dynamic people create and flourish in electronics, sensors, radar, artificial intelligence (AI), and advanced data network domains. We boldly advance technology through our research and development and then forward to demonstration and integration. With innovative laboratories and prototyping, MPD delivers groundbreaking results. We guide our Department of Defense, intelligence community, and civil clients to enhance national productivity and security and tackle the most critical missions. Bring your intelligence and creative spirit and join us at MPD! The Communication Architectures Department (CAD) performs trade studies, analyses, and simulations to optimize the overall communications performance of terrestrial, satellite, launch vehicle, and ground-based systems. CAD also provides radio frequency (RF) spectrum engineering to future military, civil, and commercial systems and guides the development of spectrum regulations and policies to assure critical wireless systems have access to necessary spectrum resources. We are seeking a Senior RF Spectrum Engineer (Engineering Specialist or Senior Engineering Specialist - Communications Systems Engineering) to support multiple facets of spectrum management and engineering such as performing interference analysis to support individual programs' spectrum certification requirements and facilitating coordination between multiple stakeholders. We work with customers throughout the Department of Defense (DoD), Intelligence Community, and civil agencies. The selected candidate will be required to work full time on-site at our facility at El Segundo, CA, Chantilly, VA, or Colorado Springs, CO. What You'll Be Doing * Perform radio frequency interference analysis and modeling of communications systems to evaluate spectrum sharing strategies and avoid harmful interference * Use knowledge of RF communications and spectrum regulations to guide program design decisions and ensure regulatory compliance * Support programs through spectrum registration and coordination processes * Coordinate with program offices, federal spectrum agencies, and other stakeholders * Mentor junior employees in spectrum management and engineering What You Need to be Successful - Engineering Specialist Minimum Requirements: * Bachelor's degree from an accredited university in Electrical Engineering or related STEM discipline * Minimum of 8 years of relevant technical experience * Knowledge of International Telecommunications Union (ITU), National Telecommunications and Information Administration (NTIA) or Federal Communications Commission (FCC) spectrum management processes * Knowledge of RF communications systems and architectures * Project development experience and ability to lead small teams of engineers * Ability to present results effectively in briefings and technical reports * Some travel, approximately less than 10%, is anticipated * This position requires ability to obtain and maintain an active TS/SCI security clearance, which is issued by the US government. U.S citizenship is required to obtain a security clearance. In addition to the above, the minimum requirements for Senior Engineering Specialist: * Minimum of 12 years of relevant technical experience * Proven project development and technical leadership experience How You Can Stand Out It would be impressive if you have one or more of these: * Master's or PhD in engineering or related discipline * Knowledge of various government programs and commercial satellite systems * Proficiency in Python or Matlab * Familiarity with modeling and simulation tools such as STK and Visualyse * Prior experience with spectrum coordination and policy * Active Top Secret / Sensitive Compartmented Information (TS/SCI) clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $129,000.00 - $249,600.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Vehicle Systems Division (VSD) sits at the center of the ideas and data behind current and future systems supplying innovative research and development; technical evaluations during the acquisition process; conceptual and detailed design; assembly, integration, and test; and operational support. Comprised primarily of highly-trained mechanical and aerospace engineers, VSD provides national expertise in the areas of vehicle engineering; guidance, navigation, and controls; robotics; electro-mechanical devices; embedded systems; fluid mechanics; propulsion; thermal control; orbital mechanics; mechanisms; structures; structural dynamics; and dynamic environments. The Vehicle Engineering & Integration Department (VEID) is part of VSD, the premier satellite and launch vehicle technical organization within the Aerospace Corporation. The Vehicle Modeling and Analysis Section within VEID is responsible for implementing multi-disciplinary analytical models and developing software tools required to execute the desired analyses with respect to satellite, ground, and launch vehicle development and operations. We are seeking a Modeling & Simulation Software Engineer (Engineering Specialist - Modeling & Simulation and Systems Software Engineering) who has outstanding technical and programming skills, an understanding of physics/physical hardware systems, is inquisitive and motivated to learn, and has uncompromising integrity and objectivity. Work Model This is a full-time position on-site position based in Chantilly, VA with some consideration given to the El Segundo, CA, location for strong candidates. What You'll Be Doing * Develop advanced, high-performance, production-quality modeling and simulation (M&S) software to help support challenging problems posed by Aerospace's customers * Develop and modify algorithms to enhance simulation capabilities to support studies for future satellite systems and architectures and interface with flight and flight-like satellite hardware, software, and system emulators to enable modular spacecraft HIL/SIL testing * Port scientific, engineering, and physics-based modeling code, calculations, and algorithms from technical documents, Matlab, Python, and Excel to Java based software and interface legacy C, C++, and Fortran codes together into tool chains or distributed simulation frameworks * Maintain and enhance Java-based distributed simulation frameworks with multi-threaded architectures and develop new distributed simulation federates, pre- and post-simulation data processing, and visualization tools * Support and/or perform analysis using software developed within VMAS to answer questions about future satellite systems and architectures * Participate and collaborate with other developers in full software development life cycle activities including design, implementation, and maintenance activities and assist in the creation of technical documentation and user guides * Participate in cross-disciplinary teams to solve complex and challenging problems and may need to help guide, advise, instruct, and mentor staff with expertise in non-software fields and little to no software engineering background What You Need to be Successful Minimum Requirements: * Bachelor's or graduate degree from an accredited program in Computer Science, Software Engineering, Electrical Engineering, Physics, or other engineering discipline * 6 years of experience in a software engineering role * Experience in Java with Object-Oriented design and development skill and knowledge of multi-threaded, multi-processor networked and distributed systems and architectures * Experience with Hardware-Software interfaces, embedded software / embedded system development, and/or robotic systems * Experience developing physics-based vehicle or sub-system level simulations including component simulation/emulation as well as physics, dynamics, orbital mechanics simulation. * Basic knowledge of space systems including spacecraft subsystems and interactions (GN&C, CDH/flight computer, power systems, comms, payloads, etc.) * Knowledge of, or willingness to learn Python, C, C++, FORTRAN, and/or Matlab to extract or port critical code, as well as JSON and XML files often used for data exchange and API definitions * Ability to obtain and maintain a U.S. Government security clearance. U.S. citizenship is required to obtain a security clearance. How You Can Stand Out It would be impressive if you have one or more of these: * Dual degree or major and minor in mechanical, aerospace, physics or related field and a software or computer engineering field * Strong knowledge of military or space systems such as sensors and payloads, guidance navigation and control (GNC), communications systems, or orbital mechanics. * Experience with NI or other automated hardware-in-the-loop test equipment such as PXIs, DAQs, ATEs, etc. * Experience working with flight hardware, flight software, or equivalent from other industries * Knowledge of HLA, DIS, TENA, or other distributed simulation frameworks, and communications frameworks such as ActiveMQ, DDS, and Kafka. * Experience with graphics and presentation API's such as Dash, Worldwind, Cesium, OpenGL. * Strong background in Python, C, C++, Swing, AWT, or JavaFX * Active TS/SCI security clearance w/CI Poly We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300.00 - $175,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. The Systems Engineering Division (SED) provides unmatched experience in systems engineering to the U.S. government and to numerous public and private agencies, universities, nonprofit organizations, consortia, and commercial companies involved in the advanced application of space technology. From systems architecture development to system analysis and optimization, astrodynamics, orbital debris, navigation, failure analysis, mission assurance, cost and schedule assessment, and economic market analysis, SED exploits an incredibly broad array of engineering and business disciplines against a diverse and dynamic portfolio of programs and national challenges. The Systems and Operations Assurance Department is the source of expertise for Operations and Facilities Engineering providing an array of technical capabilities that support our customers in assuring the availability, readiness, and success of ground assets and services required to meet the needs of the space enterprise. We have a current need for an Electrical Power Engineer(Engineering Specialist - Electrical Engineering) to join our high-performing team in solving some of today's hardest problems and help evolve our capabilities in meeting the technical challenges of tomorrow. The position requires experience with the design, development, and operations of electrical power infrastructure, particularly in the areas of power generation, transmission, distribution, protection, controls, grounding, and lightning protection systems. Work Model: This full-time position requires 100% onsite work in El Segundo CA, Chantilly VA, or Albuquerque, NM. RESPONSIBILITIES We expect the candidate to: * Provide technical expertise in identifying innovative technologies and operational enhancements to improve design, safety, resiliency/reliability and cost efficiency * Develop and implement advanced analytical techniques to evaluate facility systems and optimize overall electrical systems performance * Employ a rigorous and methodical approach to problem solving and root cause determination * Deliver independent, data-driven technical recommendations to management and customers through effective verbal and written communication * Develop/evaluate design criteria, concept design packages, support construction and commissioning operations; and develop test plans, interface control documents and test procedures * Travel to customer and/or government facilities while representing the company and department in a professional manner QUALIFICATIONS REQUIRED (Engineering Specialist - Electrical Engineering) * Bachelor's degree in electrical engineering or related field from an accredited school * 8 years of experience in design and operation of facility electrical/power systems and controls, preferably in an Architect-Engineer (A&E) firm or utility company * Engineer in Training (EIT) certificate * Knowledge of current building codes and regulations (e.g., NFPA, IBC, UFCs) * Proficiency with power distribution systems modeling and analysis tools such as SKM Power*Tools, eTAP, EasyPower * Proficiency with AutoCAD and/or analogous computer-aided drafting programs * Ability to work independently and on teams in a fast-paced environment * Experience with developing project requirements and performing electrical calculations * Strong interpersonal skills and excellent written and oral communication skills * Ability to travel • This position requires a current and active TS/SCI clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. QUALIFICATIONS REQUIRED (Senior Engineering Specialist - Electrical Engineering) * Bachelor's degree in electrical engineering or related field from an accredited school * 12 years of experience in design and operation of facility electrical/power systems and controls, preferably in an Architect-Engineer (A&E) firm or utility company * Professional engineer (PE) license * Project management experienceand ability to lead project teams * Experience leading/mentoring junior staff * Project cost estimation experience * This position requires a current and active TS/SCI clearance, which is issued by the U.S. government. U.S. citizenship is required to obtain a security clearance. PREFERRED Engineering Specialist & Senior Engineering Specialist] * Master's degree in electrical engineeringor related field * Professional engineer (PE) license * Experience with high power/utility infrastructure engineering * Experience with high density data center design and operations * Experience with launch base infrastructure and facilities * Familiar with facility/infrastructure control and supervisory systems (e.g., SCADA, DCS) * Familiar with programmable logic controllers (PLCs) and control systems communications We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $117,300 - $226,900 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.

The Aerospace Corporation is the trusted partner to the nation's space programs, solving the hardest problems and providing unmatched technical expertise. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers. When you join our team, you'll be part of a special collection of problem solvers, thought leaders, and innovators. Join us and take your place in space. At the Mission Payloads Division (MPD), we are pioneers in remote sensing systems that guide our country's space enterprise. Our talented and dynamic people create and flourish in electronics, sensors, radar, artificial intelligence (AI), and advanced data network domains. We boldly advance technology through our research and development and then forward to demonstration and integration. With innovative laboratories and prototyping, MPD delivers groundbreaking results. We guide our Department of Defense, intelligence community, and civil clients to enhance national productivity and security and tackle the most critical missions. Bring your intelligence and creative spirit and join us at MPD! The Nuclear Hardness & Survivability (NH&S) department resides within MPD. Our staff includes technical leaders and subject matter experts in the areas of radiation survivability of electronic components/ hardware units in a natural and man-made space environment. Our expertise, combined with modeling and analysis capabilities, enables NH&S to deliver trusted assessments and recommendations to national security space systems and commercial customers.Take this opportunity to apply to the Aerospace NH&S department for the opportunity to work on cutting edge science with immediate mission impact. Work Model: The selected candidate will be required to work full time on-site at our facility at either Chantilly, VA; or El Segundo, CA. What You'll Be Doing * Lead Nuclear Hardness and Survivability (NH&S) analyses for satellite electronics units, subsystems, payloads, and missile systems * Review test plans and test reports for radiation testing of electronic components against requirements on total dose, displacement damage, prompt dose rate latchup/ upset, and single event effects * Prepare survivability analysis for space environments such as micrometeoroids, atomic oxygen, solar energetic particles, and single event effects * Evaluate plans and procedures for component and box-level Flash X-ray testing * Calculate radiation environment estimations using DTRA M&S tools (ASSIST, QPROMPT, DGBETS, GSCENARIO, PRPSIM, FAB4DA, EMREP, GAP-RF), testable hardware toolkit (THTk), FASTRAD, MCNP, SPENVIS, CREME96, GEANT4, Ansys Charge Plus, SIRE2, Warren and other radiation analysis tools * Participate at program PDRs, CDRs, and other reviews as required in reviewing radiation requirements and compliance * Promote engagement with and across industry and government to review survivability/ radiation plans and implement best practices What You Need to be Successful Minimum Requirements: * Masters degree or higher in physics, nuclear engineering, electrical engineering or other related degree * 10 or more years of related post-grad experience * Experience in electron/ proton/ x-ray transport analysis or related experience * Track record reviewing NH&S analyses and NH&S requirements compliance * Proven proficiency evaluating SGEMP as a design consideration of flight hardware or related experience * Documented capability of leading evaluation of electronic components for space flight units * Demonstrated thorough understanding of prompt dose effects * Willingness to travel domestically to support customer engagements, up to 25% * This position requires ability to obtain and maintain a security clearance, which is issued by the US government. U.S citizenship is required to obtain a security clearance How You Can Stand Out It would be impressive if you have one or more of these: * Doctoral degree in physics, nuclear engineering, electrical engineer or other related degree * At least 15 years in Nuclear Hardness and Survivability * Demonstrated capability of performing radiation predictions using DTRA ASSIST, THTk, FAB4DA, FASTRAD, MCNP, GEANT4, Ansys Software Suite, SPENVIS, CREME96, ICEPIC and other radiation tools * Extensive expertise of radiation effects and interactions on electric components and materials * Deep experience planning, executing, and analyzing radiation test programs for parts against relevant radiation environments * Proven systems engineering experience with ability to apply to survivability questions * Participate in industry and government forums in the space community, including SPWG, JEDEC/SAE, HEART and IEEE groups * Active TS/SCI or Q clearance We offer a competitive compensation package where you'll be rewarded based on your performance and recognized for the value you bring to our business. The grade-based pay range for this job is listed below. Individual salaries within that range are determined through a wide variety of factors including but not limited to education, experience, knowledge and skills. (Min - Max) $151,300.00 - $226,900.00 Pay Basis: Annual Leadership Competencies Our leadership philosophy is simple: every employee, regardless of level and role, can demonstrate leadership. At Aerospace, our commitment is our people. To cultivate our talent and ensure that we have a strong pipeline of future leaders, we want individuals who: • Operate Strategically, • Lead Change, • Engage with Impact, • Foster Innovation, • Deliver Results Ways We Reward Our Employees During your interview process, our team will provide details of our industry-leading benefits. Benefits vary and are applicable based on Job Type. A few highlights include: * Comprehensive health care and wellness plans * Paid holidays, sick time, and vacation * Standard and alternate work schedules, including telework options * 401(k) Plan - Employees receive a total company-paid benefit of 8%, 10%, or 12% of eligible compensation based on years of service and matching contributions; employees are immediately eligible and vested in the plan upon hire * Flexible spending accounts * Variable pay program for exceptional contributions * Relocation assistance * Professional growth and development programs to help advance your career * Education assistance programs * An inclusive work environment built on teamwork, flexibility, and respect We are all unique, from various backgrounds and all walks of life, yet one thing bonds all of us to each other-the belief that we can make a difference. This core belief empowers us to do our best work at The Aerospace Corporation. Equal Opportunity Commitment The Aerospace Corporation is an equalopportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, age, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender, gender identity or expression, color,religion,geneticinformation, marital status, ancestry, national origin, protected veteran status, physical disability, medical condition, mental disability, or disability status and any other characteristic protected by state or federal law. If you're an individual with a disability or a disabled veteran who needs assistance using our online job search and application tools or need reasonable accommodation to complete the job application process, please contact us by phone at 310.336.5432 or by emailat .You can also review Know Your Rights: Workplace Discrimination is Illegal.