Electrical design engineer jobs in Houston, Texas - Page 4Create job alerts

Job Description Electrical Engineer – Power Systems & Water Infrastructure San Jose, CA | 100% In-office role | Relocation Required Full-Time | Permanent | Direct Hire Salary Range: $120,000 – $165,000 About the Opportunity We are recruiting on behalf of a well-established California-based water utility for a permanent, direct-hire Electrical Engineer to join their San Jose engineering team. This role supports the planning, detailed design, and construction design support of critical water infrastructure, with a strong emphasis on electrical power systems, controls, and motor control centers. This is a long-term career opportunity with a stable utility organization supporting essential public infrastructure. What You’ll Do The Electrical Engineer will provide electrical and controls engineering support for water facilities, including: • Prepare electrical construction drawings and technical specifications, • Perform advanced electrical engineering calculations, including:, • Short circuit current calculations, • Voltage drop calculations, • Breaker coordination studies, • Arc flash analysis, • Design and support low- and medium-voltage power distribution systems, • Design and work with motor control centers (MCCs), • Develop bid packages and support procurement of major electrical equipment, • Prepare RFPs and evaluate consultants and vendors, • Manage project scope, schedule, and budget, • Coordinate with contractors, consultants, agencies, and internal stakeholders, • Support construction management and field inspections, • Prepare reports, cost estimates, and technical documentation, • Assist with PUC rate case filings and annual capital budgets, • Present technical information to public agencies, special districts, and community groups, • Provide technical support to operations and maintenance teams, • Participate in continuous improvement initiatives Required Qualifications • Bachelor’s degree in Electrical Engineering (required; equivalent experience or coursework does not substitute), • Minimum 2 years of experience working as an Electrical Engineer, • Hands-on electrical design experience (power distribution, schematics, specifications) — candidates with installation support backgrounds only will not be considered, • Demonstrated knowledge of the National Electrical Code (NEC) as applied to power distribution (not controls-only) — candidates must be able to cite applicable NEC articles during interview, • Experience with motor control center (MCC) design (not just installation), • Experience with generator system design, including standby/emergency power systems and generator installation design, ATS equipment, an the like, • Experience with Arc Flash analysis principles and applicable NFPA 70E standards, • Proficiency with AutoCAD and development of design plans, • Project management experience with the ability to manage multiple priorities, • Strong written and verbal communication skills, • Proficient in Microsoft Office/M365, • Valid California Driver License (or ability to obtain one if coming in from out of state) Preferred Qualifications • California Engineer-in-Training (EIT) certification or California PE, • Experience using ETAP or similar power system modeling software, • Experience in water, wastewater, or process industries, • Experience working with consultants and contractors Why This Role • Direct hire, permanent position with a utility client, • Long-term career stability in essential infrastructure, • Competitive salary with a comprehensive utility benefits package, • Relocation assistance may be considered for the right candidate, • Work on high-impact capital projects that support local communities, • Strong internal engineering culture and professional development opportunities Benefits Our Client offers a comprehensive benefits package including: • 401(k) Plan with employer match, • Defined Benefit Pension Plan — 100% employer-funded, vests at 5 years, • Comprehensive Medical, Dental, and Vision coverage through the utility’s Health Care Plan or Kaiser Permanente, effective the first of the month following date of hire, • Life Insurance and Accidental Death & Dismemberment, effective the first of the month following date of hire, • Long-Term Disability, • Tuition Reimbursement, • 35 days of paid time off annually — 11 paid holidays, 4 floating holidays, 10 vacation days, and 10 sick days Union Membership This position is covered under a collective bargaining agreement. The successful candidate will be required to be a member of, or become a member of, the International Federation of Professional and Technical Engineers (IFPTE), AFL-CIO. The IFPTE represents engineering and technical professionals — not craft or trade workers — and is the union of record for our Client’s engineering and water quality employees.

Job Description Thermal Engineering International (USA) Inc. is currently seeking a motivated and experienced Sr. Project Engineer for Data Centers to join our talented team. In this critical role, you will be responsible for maintaining the overall design responsibility for specific projects to which he/she has been assigned, and is the primary contact for the project manager, workshops, vendors, and the client. The ideal candidate will have a strong background in engineering, excellent project management skills, and a passion for technology and innovation in the data center industry. Responsibilities • Accountable for the design of mechanical, structural, electrical, HVAC, Building Management, Extra Low Voltage, as well as Life Safety and Security systems, ensuring compliance with customer requirements., • Preparation and issuance of engineering RFQs/Requisitions in a timely manner., • Submission of company drawings and documentation in accordance with contract specifications., • Examine and authorize all documentation and drawings from vendors., • Review and disposition non-conformance reports generated by the manufacturing facilities., • Bachelor of Science Degree in Mechanical Engineering and/or Electrical Engineering., • 5+ years of relevant experience Designing and Project Engineering., • Experience working with a manufacturing company in field of design and drafting., • Design experience in Mechanical, Electrical and plumbing services for chiller plant system within Data Center industry., • Registered as a Professional Engineer is preferred., • Experience in heat load calculation and lighting simulation is preferred., • Reviewing design drawing/model developed in AutoCAD, Solidworks, Inventor and Revit., • Proficient in Microsoft Word and Excel., • Proficiency in Excel, Visual Basic or VBA preferred. To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open positions. Our base pay ranges are set based on the function, discipline, level and regional location and are benchmarked against companies in the same or similar industry. Final offers may vary based on multiple factors including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. Compensation: $130,000 - $160,000 annually DOE Benefits Click link to view a summary of our benefits.

Job DescriptionSalary: We are seeking a Senior Pipe Stress Engineer to join our project team in Houston, TX. Responsibilities: Project Leadership • Lead the full piping engineering scope for assigned projects, including coordination with international execution centers., • Oversee all pipe stress analysis activities for both new projects and existing facility issues., • Develop, manage, and enforce project schedules, budgets, and deliverable requirements., • Monitor project progress and provide consistent reporting throughout execution., • Collaborate with project managers, engineering teams, and clients to clarify objectives and define scope., • Office location is Houston, TX. Piping Design and Engineering • Provide expert guidance on complex piping systems, applying sound engineering judgment and industry best practices., • Review piping layouts, isometrics, and 3D models, including work produced by global offices., • Ensure all designs comply with project specifications, applicable standards, and governing codes (ASME, API)., • Perform stress analysis, support material selection, and optimize pipe routing., • Support procurement activities for piping components such as specialty items, supports, and valves., • Oversee the checking and release of piping deliverables for downstream use. Team Supervision • Mentor, supervise, and support junior engineers and designers., • Lead routine design reviews and ensure alignment across engineering disciplines., • Promote a collaborative, efficient, and highperforming team culture. Coordination and Communication • Work closely with civil, structural, mechanical, electrical, instrumentation, and process safety teams to ensure proper integration of piping systems., • Review and approve vendor drawings and documentation., • Participate in design reviews, HAZOP sessions, and project presentations., • Respond to technical inquiries and manage design changes effectively. Quality Assurance • Implement quality control procedures and conduct periodic design audits., • Confirm that all deliverables meet project requirements and regulatory expectations., • Identify and address risks or issues that could affect project performance. Qualifications Education & Experience • Bachelors degree in Mechanical Engineering (preferred)., • Minimum of 10 years of experience in piping layout, design, and pipe stress analysis within the petrochemical sector, including at least 3 years in a leadership capacity. Technical Skills • Proficiency with design review tools such as SmartPlant Review and Navisworks., • Strong understanding of piping codes and standards (ASME, ANSI, API, PIP)., • Competence in material identification and selection., • Extensive experience with Caesar II and preparation of pipe stress analysis reports for common piping systems., • LNG project experience is preferred., • Knowledge of AIV/FIV principles and screening methods is advantageous., • Experience developing piping material class specifications is preferred., • Familiarity with NDE and piping system testing requirements is preferred., • Understanding of valve applications and specifications is preferred. Leadership & Communication • Demonstrated ability to lead and mentor engineering teams., • Strong communication, analytical, and decisionmaking abilities., • Excellent organizational skills and capability to manage multiple priorities. Additional Skills • Familiarity with construction and installation practices., • Understanding of project management fundamentals., • Experience working on international projects or within multicultural teams is a plus. About Novetus Engineering LLCNovetus is unsurpassed in our commitment to achieving our objectives as efficiently as possible. From a piping modification or pump upgrade project to helping to manage a multi-billion-dollar international development, Novetus will field the right team and the right systems to get the work done quickly and fit for the purpose. Novetus combines engineering workflow automation expertise with an experienced team of engineers and project managers to execute projects with exceptional efficiency. An engineering company focused on the oil, gas, and petrochemical industry, Novetus is based in Houston, Texas and is privately held.

Job Description At Compu Dynamics, we don't just build infrastructure—we create the backbone of the digital future. As North America's premier technology infrastructure design-build partner, we design, construct, and maintain mission-critical data centers for some of the world's most innovative companies. With roots in one of the fastest-growing data center markets in the world, our growth is as intentional as our impact. Summary/Objective: The Senior Mechanical Engineer is a technical expert responsible for providing comprehensive project management and engineering support for new and existing modular industrial and data center applications. This role oversees the entire mechanical lifecycle—from initial site surveys and technical calculations to manufacturing process development and field troubleshooting. The Senior Mechanical Engineer acts as a primary liaison between internal partners and third-party providers, ensuring all designs are constructible, code-compliant, and optimized for performance. This individual is recognized as a subject matter expert in mechanical specifications and code analysis, leading project teams through complex design challenges while driving the adoption of industry best practices. Essential Functions: • Provides project management support for new or existing projects. Verifies that design, shop and record drawings comply with company policies and procedures, including document, • Demonstrates advanced knowledge of mechanical specifications with respect to modular industrial and datacenter applications., • Manages the development of manufacturing processes and procedures for new customer modules and processes., • Oversees drawing and coordination processes for each cognizant project in terms of schedule, quality and, • Identifies design elements that must be incorporated into drawing designs., • Performs a variety of technical calculations such as, heating and cooling loads, hydronics, plumbing fixtures units, energy analysis, etc. Acts as the company expert on code analysis., • Acts as a liaison between internal partners and third party providers or customers., • Interfaces with vendors for technical support and equipment selection based on size requirements, specific equipment selected and proposed equipment layout., • Performs site surveys to document existing job site conditions for use in design documents and drawings., • Ensures that all designs conform to all applicable codes, company policies and Visits job sites to assist with and evaluate compliance to approved design documents, drawings and code requirements., • Reviews architectural and structural drawings for their impact on mechanical Coordinates design requirements and resulting designs with the project architect, structural engineer, electrical engineer, civil engineer, kitchen designer and process engineers., • Performs technical reviews of construction documents and reviews drawings prior to bid and drawing changes prior to construction to identify constructability issues., • Creates technical reports to support recommendations or engineering positions on, • Leads project teams in the resolution of design questions/problems, and conducts research for compliance, codes changes, best practices etc.., • Develops and coordinates alternative solutions to heating and cooling issues using input from a variety of sources., • Troubleshoots and directs field technicians for the purpose of diagnosing degraded system performance., • Provides conceptual estimation assistance, and gives professional input during bid strategy development., • Prepares project specifications and assists the project manager in project budget development. Creates proposal letters and manages bid package development., • Reviews and approves submittals and shop drawings and authors responses to RFIs and code inspector., • Participates in forecasting labor hours needed for tasks and manages and develops scope, schedule and project fees for projects., • Supports new factory equipment scoping and selection for business expansion and meeting customer requirements., • Ensures scheduled equipment can deliver distributed capacity through the performance of air and water balance analyses. Functional Knowledge: Regarded as the technical expert in mechanical engineering; possesses in-depth expertise in own discipline and broad knowledge of related engineering fields. * Business Expertise: Anticipates business and regulatory issues; recommends product, process, or service improvements. * Problem Solving: Solves unique problems with broad impact on the business; utilizes conceptual and innovative thinking to develop solutions. * Interpersonal Skills: Communicates complex ideas, anticipates potential objections, and persuades others—often at senior levels—to adopt different viewpoints. * Leadership: Leads projects with notable risk and complexity; develops the strategy for project execution. Minimum Requirements: • Bachelor's Degree in Mechanical Engineering or similar engineering degree, • 15+ years experience in Mechanical Engineering, • Expert/Subject Matter Expertise in Mechanical Engineering, mechanical applications, and engineering principals., • CAD Skills/Expertise Required Work Environment: Work is primarily performed in an office environment with significant collaboration across engineering disciplines. Regular visits to job sites and manufacturing facilities are required. Physical Demands: Must be able to perform site surveys and document existing job site conditions, which may involve walking active construction sites and accessing mechanical spaces. Compu Dynamics Pay Range$115,000—$165,000 USD Compu Dynamics offers a comprehensive benefits package that supports the health, well-being, and growth of our team members. Full-time employees are eligible for: * Medical, Dental, and Vision Insurance – effective the first of the month following hire, with plans currently offered through Cigna. * 401(k) Retirement Plan – automatic enrollment at 3% on your date of hire; company match up to 4% (with a 7% contribution needed to receive the full match), plus profit-sharing opportunities. * Employer-Paid Life Insurance – coverage equal to 1x your salary. * Short-Term Disability (STD) – fully paid by Compu Dynamics. * Voluntary Benefits – including Long-Term Disability, supplemental life insurance (employee, spouse, children), Accident, Critical Illness, and Hospital Indemnity coverage. * Paid Time Off (PTO) – accrue up to 160 hours (4 weeks) annually, beginning after 60 days of employment. * Paid Holidays – 7 company-observed holidays plus a floating holiday. * Birthday Time Off – 8 hours of paid time off during your birthday month. * Paid Parental Leave – 8 weeks maternity leave and 2 weeks paternity leave, concurrent with FMLA. * Volunteer Time Off (VTO) – 40 hours annually for community service. • Boot Reimbursement – up to $150 annually, available from your first day. Tool Reimbursement – $250 annually, available after 60 days. * Tuition Reimbursement – up to $5,000 annually for approved educational programs. Compu Dynamics provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. Compu Dynamics complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Compu Dynamics expressly prohibits any form of unlawful employee harassment based on race, color, religion, gender, sexual orientation, national origin, age, genetic information, disability or veteran status. Improper interference with the ability of Compu Dynamics employees to perform their expected job duties is absolutely not tolerated.

Job Description HVAC Electrical Engineer Custom Air Products & Services, Inc. is an aggressively growing company always looking for qualified individuals with a strong work ethic, a commitment to excellence and a desire to join a winning team. We have been proudly serving the Houston and surrounding areas, providing quality service and customized installation of commercial and industrial HVAC systems. Job Description: Electrical engineers are responsible for designing and preparing technical electrical drawings and Bill of Materials. Responsible for the design and layout of custom equipment and field installed projects. They will be required to select components and materials needed to meet customer specific project requirements. The ability to communicate overall project concepts, layouts and component designs via complete drawing packages and submittal book data is the primary responsibility of engineering staff personnel. Preferred Background Applicants should have experience in/with the following; • Knowledge in all disciplines of the HVAC and/or Manufacturing industry, • Designing electrical power circuits, • Designing electrical control circuits (AC and DC), • Knowledge of the design of and construction practices of manufactured and engineered products and services such as;, • Fans, • Compressors, • Heaters, • Controls (DDC and Relay Logic), • Design and draw wiring and layout diagrams, • Select electrical components, • Design HVAC Sequence of Operations, • Calculate MCA and MOCP, • Create visual guidelines for construction purposes, • Draft technical details, • Specify electrical connections, • Electrical back-pan detailed layouts, • Use Computer Aided Design and Drafting systems to prepare drawings, AutoCAD electrical, • Create and store drawings electronically, • Prepare variations of design, • Explain concepts to customers, fabrication and installation workers, • Prepare engineering drawings that detail plans and specifications, • Physically observe each project in fabrication and provide input as project is in progress, • Must be proficient in the following software packages, • AutoDesk AutoCAD, • Microsoft Word, • Microsoft Excel, • Knowledge in NEC, • Knowledge with hazardous locations and its requirements, • Knowledge in IEC / ATEX is a plus, • BSME or BSEE required, • Registered Engineer in the State of Texas, • Knowledge of Electrical and Mechanical codes for hazardous areas and NFPA 496 systems, • Minimum 8 - 10 years’ experience in HVAC industry Key Components • Effectively communicates relevant project information to team members, • Ability to understand directions and work on multiple projects, • Must be willing to work overtime, • Ability to read customer provided drawings and specifications, • Possesses general working knowledge of structural design, • Ability to read and understand systems engineering drawings, • Must be quality oriented with the ability to multi-task, • Possesses leadership skills and teamwork attitude, • Strong organizational skills required Benefits: • 401K & company match, • Medical insurance, • Dental insurance, • Vision plan, • Prescription plan, • Facebook, • Twitter, • LinkedIn, • Our Website

Job Description About Us PHASOR Engineering USA LLC. is a dynamic consulting firm specializing in the engineering and design of overhead and underground transmission and distribution systems, substations, fiber optic networks, and related infrastructure. Our team supports projects across the full lifecycle—from conceptual design through commissioning and startup—serving utilities, industrial clients, and municipalities. Position Overview We are seeking a highly motivated Distribution Engineer to join our engineering team on a full-time basis. This role can be based in Texas. You’ll work alongside an experienced technical team in a fast-paced environment, contributing to a wide range of projects and gaining exposure to all aspects of the engineering and design process. Key Responsibilities • Support the design of overhead and underground electric distribution systems ranging from 4kV to 69kV., • Prepare detailed scopes of work, cost estimates, engineering calculations, and design drawings in accordance with applicable utility standards, U.S. national codes, and industry best practices (e.g., NESC, IEEE)., • Collaborate with internal teams and external stakeholders (utilities, municipalities, contractors) to gather design requirements and ensure project alignment., • Utilize industry-standard software such as QuickPole, SpidaCalc, and/or PLS-CADD for line design and analysis., • Perform or support aerial line inspections and assessments for distribution and joint-use (communications) infrastructure., • Apply relevant U.S. standards including the National Electrical Safety Code (NESC) and applicable state/local regulations., • Assist with permitting processes, including coordination with DOTs, railroads, cities, and counties across Texas., • Collect, interpret, and organize engineering, survey, and vendor data., • Identify and help resolve technical and project-related challenges in collaboration with senior engineers., • Support the development and maintenance of internal engineering standards, procedures, and best practices. Qualifications • Bachelor’s degree in Electrical Engineering or Civil Engineering from an accredited institution., • Minimum of 5 years of related experience in electric utility distribution design., • Strong understanding of overhead and underground distribution systems., • Proficiency with design tools such as QuickPole, SpidaCalc, and/or PLS-CADD., • Familiarity with NESC, IEEE standards, and utility design practices in the U.S., • Knowledge of permitting requirements across Texas (TxDOT, municipalities, rail crossings, etc.) is an asset., • Engineer-in-Training (EIT) or Professional Engineer (PE) license (or ability to obtain) is preferred., • Proficiency with Microsoft Office Suite., • Strong communication, organizational, and problem-solving skills with attention to detail., • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site gym, • On-site parking, • Paid time off, • 401K, • Vision care, • Wellness program

Job Description Electrical Engineer IV 12 months or longer Houston, TX with some travel possible The Senior Electrical Engineer oversees and manages the electrical and controls design of expansion andmaintenance capital projects executed by third party engineering firms to ensure compliance with Company standards and specifications and industry standards and managed to the project budget and schedule. Liaison with other functional groups within Project Execution, Operations and Shared Services to ensure project and company requirements are achieved and incorporated into the design deliverables. Key Responsibilities: • Responsible for the successful operations of the assigned area with corporate financial impact., • Oversees the implementation of technical solutions, ensuring efficient coordination of technical resources and with other all partners., • Oversees the development of the project scope, schedule, capital cost estimate, execution planning, risks and supporting information related to assigned facility projects., • Manage the execution of the design deliverables by a third party engineering firm against the project budget and schedule, • Reviews and approves design deliverables for example drawings, technical reports and material listing sheets, • Reviews vendor materials quotations, prepares technical evaluations, and recommends to the supervisorselections based on technical merit along with price and delivery. For example, turbine/compressor packages,equipment vessels, buildings, pipe, valves and fittings, • Provide technical support during the construction phase and the commissioning phase of the project., • Reviews lessons learned from past projects and incorporate recommendations into future designs, • Provide technical guidance to junior engineers within the team or others based on technical expertise, • Lead department programs, • Ensures that development project scope definitions comply with all regulatory, environmental, health and safety requirements through management and coordination of internal departments Qualifications: • Bachelor's degree in Electrical Engineering, • 7 years of progressively responsible experience in engineering and project management, • 120/208 volt systems including lighting panels, lighting, convenience outlets., • 480 volt systems including motor controls centers/motor starters, motors, power panels,transformers, auto transfer switches and generators, • 4160 volt systems including switchgear, motor starters, synchronous motors, circuit breakers,relaying, metering., • Cable and conduit sizing., • Starter and overload sizing., • Grounding systems., • Cathodic protection systems., • Allen-Bradley or equivalent PLC base controls systems, • Motor controls circuits., • Valve actuators electric and pneumatic., • PID loop controllers., • Emergency Shutdown Systems (ESD).3. Instrumentation, • Smart and analog transmitters including Rosemount and Honeywell., • Pneumatic gauges., • Pressure, differential pressure and temperature transmitters. Our Safety Pledge to You: If you are as committed to your success as we are committed to your safety, then this is the position for you! For us, our guiding principle has always been and will continue to be the safety of our people. It's that simple! Why WECTEC Staffing Services? WECTEC Staffing Services delivers customer-focused solutions, offering everything from high-volume, cost-effective staffing to specialized niche roles, while maintaining best-in-class service. Our employees bring expertise across technical and corporate functions, supporting international contracts in over five countries. We invite you to explore opportunities within our distinguished global talent network. WECTEC Staffing Services offers competitive pay to all of our employees. Additionally, most positions qualify for benefits including the following: • Comprehensive Health and Income Protection Benefits, • 401(k) Savings Plan WECTEC Staffing Services continues to successfully place professional and technical resources into key roles globally. You can learn more by visiting You can submit your completed application, and explore other available options, using the following link: careers.westinghousenuclear.com Get connected with WECTEC Staffing Services on social media: LinkedIn Equal Opportunity Employer including Veterans and Individuals with Disabilities

Job Description Position: Thermal Engineer – Server R&D Team We are seeking a highly skilled Thermal Engineer specializing in thermal management design for server and rack products. This role involves developing thermal solutions from concept to mass production, utilizing advanced simulation and testing techniques to ensure product performance and reliability. Key Responsibilities: • Lead thermal management design for server and rack systems, including chip, board, system, and rack-level thermal solutions., • Conduct thermal simulation and optimization using advanced tools such as FloTherm, Icepak, and Ansys CFD., • Plan and execute thermal tests, including operating environmental chambers to validate design performance and reliability., • Analyze and optimize airflow management systems and design efficient cooling solutions, such as liquid cooling or hybrid cooling technologies., • Collaborate with cross-functional teams (mechanical design, electrical design, and manufacturing) and customers to ensure designs meet thermal performance, production requirements, and client-specific needs., • Actively participate in customer technical review meetings, provide design recommendations, and resolve technical issues promptly., • Build strong client relationships by working closely with customers to refine technical solutions and ensure alignment with their expectations., • Review and evaluate new technologies and materials to ensure thermal design meets industry trends and future needs., • Prepare detailed test reports and technical documentation to support internal and customer design reviews., • Work closely with Taipei and other global R&D centers, requiring strong communication skills in English and MandarinQualifications:, • Bachelor’s or Master’s degree in Mechanical Engineering, Thermal Engineering, or Aerospace Engineering. A Ph.D. is a plus. 5+ years of thermal design experience specifically in server or data center products * Hands-on experience in liquid cooling design (cold plate, pump loop, coolant selection, leak risk mitigation) • Deep understanding of thermodynamics, heat transfer, and fluid dynamics, with practical application in design and testing., • Expertise in thermal simulation tools (e.g., FloTherm, Icepak, Ansys CFD) and 3D/2D CAD tools (e.g., PTC Creo, SolidWorks, UG NX)., • Hands-on experience with server thermal testing equipment, including environmental chambers and airflow measurement devices., • Ability to develop and optimize liquid cooling solutions and a strong understanding of hybrid cooling technologies., • Familiarity with fan module design and airflow control techniques., • Excellent analytical and problem-solving skills, with the ability to perform trade-off analysis and evaluate multiple design options efficiently., • Strong cross-functional and customer communication skills, with fluency in English required; Mandarin proficiency preferred., • Familiarity with rack server design specifications and data center operational requirements., • Experience in developing products for hyperscale data centers is highly desirable. qVvZ4aQex3

Job Description Job Summary This Electrical Designer I position creates basic designs for electrical power and control systems utilizing skills, knowledge, acceptable concepts, practices, and procedures recognized within the electrical engineering field. This position relies on instructions, pre-established guidelines, and design standards combined with the computer-aided design (CAD) to perform the required functions. This position provides support to Senior Designers, Engineers, and Project Managers This position receives assignments from a Project Manager, Engineer or Senior Designer Guidant provides best-in-class electrical safety solutions—Arc Flash Assessments, Infrared Thermography, and Electrical Safety Training—helping organizations meet compliance, reduce risk, and protect their people. We're not just checking boxes—we're driving a culture of safety. Key Responsibilities • Familiar with safety equipment, uses it as required, comply with company safety policies, demonstrate awareness and concern for safety of self and co-workers at all times, • Answerable for assigned responsibilities, • Develop and maintain professional, cooperative, positive relationships with colleagues, • Set high expectations of performance for self, strives for accuracy, attention to details, completes tasks per schedule, pro-active sense of commitment and enthusiasm, • Take proactive actions to respond promptly in appropriate capacity necessary to meet project demands, • Communicate timely, clearly, and to the point; respectful of other person’s opinion and exhibits excellent listening skills and comprehension, • To be professional, tactful, responsive, strong client relationship and sensitive to client’s needs, • Identify and clarify the problem, gather and assess causes and solutions, derive well-reasoned conclusions, test against relevant criteria and standards, chooses the best alternative, • To be organized, tidy, on time, quiet, non-intrusive, productive and maintains composure and professionalism under stress, • Treats people with respect and honesty, and keeps commitments, • Provide basic electrical power and control designs and details for installations of electrical and control systems, • Utilize Morrow Engineering established practices, standards and procedures to perform tasks, • Develop or revise designs, details, and drawings from experience, existing designs, sketches, verbal instructions, and written directions, • Review drawings and designs to ensure adherence to established CAD standards, • Develop or revise designs, details, and drawings in accordance with established CAD guidelines, • Review all designs for accuracy and completeness prior to submitting, • Prepare as-built drawings from field generated markups, • Perform work under the technical supervision of a Project Manager, Engineer, or Senior Designer, • Cooperate with the project team to maximize the success of the project, • Must be effective at communicating with written and oral communication skills, • Work on concurrent projects and proportions time appropriately, • Complete assigned work within agreed upon schedule, • Demonstrate initiative in seeking additional tasks and responsibilities, • Complete work assignments with a strong emphasis on technical accuracy and overall attention to detail, • Prepare and assemble documents for shipment (i.e., photocopying, binding, etc.), • Operate peripheral equipment (i.e., printers, copiers, plotters, etc.), • Participate in occasional trips to project sites to gather/verify existing information, • Associates or Technology Degree and/or 2 years of experience in the field of industrial electrical power, power distribution, and control system design, • Excellent oral and written communication skills, • Demonstrated knowledge of, and ability to apply, the current National Electrical Code, NFPA 70, Chapters 1, 2, 3, 4, and 9, • Demonstrated basic knowledge of industrial type electrical distribution systems, • Demonstrated basic knowledge of industrial type electrical distribution equipment, • Capable of reading and understanding single line diagrams, riser diagrams, power, lighting, grounding, and instrument plans, • Capable of reading and understanding schematic, wiring, instrument loop diagrams, and P&ID’s, • Familiar with industrial and/or manufacturing facilities, • Basic ability of reading, understanding, and utilizing building and mechanical drawings, • Demonstrated knowledge of commonly used electrical design concepts, practices, and procedures, • Demonstrated ability to apply AutoCAD techniques and drafting skills specifically related to electrical power and control systems, • Demonstrated basic ability to apply applicable electrical design software such as conductor sizing, conductor de-rating, lighting, cable pulling, and cable tray loading., • Must have working knowledge of Microsoft Word, Excel, and Outlook, • Must be capable of accurately performing technical calculations, • Competitive base salary, • 401(k) with company match, • Health, dental, vision insurance, • Paid time off and holidays, • Professional development opportunities DoiAvkhA74

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for a Systems Engineer to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Work as an Orion Mission Planner and analyst by being responsible for the coordination and technical integration of the Orion spacecraft vehicle performance, limitations, and mission readiness., • Perform technical integration of cross-system issues, including developing issue resolution plans, determining technical/cost/schedule impacts, and recommending courses of action to minimize impacts to the overall vehicle., • Coordinate technical engineering integration with other elements for the Orion Program Office, the prime contractor, European Space, • Agency, hardware owners, NASA system managers, and integrated vehicle performance and other centers and programs., • Participate in Orion Program review boards, technical interchanges, and other technical boards and forums providing expert technical guidance regarding the spacecraft capability and mission design., • Coordinate with multiple engineering disciplines in support of spacecraft performance and mission planning trade studies., • Provide a status of technical assistance activities, communicates to Program management and team leads, elevates issues, and recommends mitigations to the Orion Program while communicating with the appropriate systems leads, Technical Authorities and line management., • Coordinate all activities through the Mission Planning and Analysis Lead., • Understand mission concept of operations, mission objectives, and spacecraft systems., • Develop concepts and define future human space exploration vehicles and missions., • Study future Lunar mission campaigns, evaluating constraints across multiple space vehicles such as Gateway, Orion and HLS., • Work on requirements definition, flow-down, assessment and verification., • Work with team members to identify risks, develop risk statements and responses., • Review documentation for major milestone reviews such as CBR, PDR, CDR, etc., • Review Hazard Analyses., • Work on trade studies and participate in stakeholder reviews., • Work in a team environment., • Report to the team lead to provide status on progress, issues and requests for support., • Maintain a professional relationship with the NASA customer, other NASA support contractors and Orion commercial partners. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a minimum of a bachelor's degree in engineering and normally possess 5 - 10 years of related experience. License and certification may be required., • Experience in early program concept development and formulation.Experience with requirements development, design trades, development of Concept of Operations, risk analysis, and system analysis of space hardware., • Experience creating concepts for operations of single vehicle systems as well as operations across multiple space vehicles., • Experience with technology roadmap development and creating technology infusion plans., • Experience collecting/understanding stakeholder needs., • Experience with interface definition for vehicle subsystems., • Experience with interface definitions between multiple vehicles or elements of a mission., • Experience creating configuration growth or evolution plans and defining incremental capabilities for a mission sequence., • Ability to define mission sequences both within a single mission and across multiple missions., • Experience with Test and Verification of spaceflight hardware., • Electrical, mechanical, or aerospace engineering degree., • Experience working with multiple NASA organizations., • Experience working across NASA centers., • Experience with hardware or software development projects., • Experience with space mission analysis (e.g., orbit analysis, delta-V budgets, spacecraft constraint evaluation)., • Familiarity with human space exploration systems (for example Orion, Commercial Crew, ISS, EMU/xEMU)., • Basic knowledge of commonly used concepts, practices, and procedures in the space hardware field, such as mechanical and electrical system design, engineering drawings and sketches, and material selection for engineering products., • INCOSE Systems Engineering Professional certification., • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are looking to hire a detailed-oriented, driven, and resourceful electrical designer for multiple Microgrid Engineering Procurement Construction (EPC) projects. The successful candidate will perform project and electrical design work. You will prepare project design packages typically comprising one lines, layouts, MTOs, installation details etc. under the supervision of a Senior/Lead Engineer. Mechanical / construction design experience is a plus. This position will report to the Director of Microgrid Engineering and will work a hybrid schedule based out of our headquarters in downtown Houston, TX. Key Responsibilities: Perform the following under supervision of Project Lead Engineer: • Complete Electrical designs and layouts for complete systems and components of a project, • Performs project design packages typically comprising one lines, layouts, MTOs, installation details, etc., • Ensures compliance with required specifications, tolerances, safety factors, and client requirements, • Understands and applies commonly used company design standards and methods., • Designs and creates orthographic (2D) drawings, • Collaborates with Engineers and Designers to ensure quality of design, • Responsible for ensuring that tasks assigned are completed on time and are of good quality, • Associates in CAD & Design or Electrical Engineering from accredited university, • 4+ years of relevant experience in Electrical Design required, • Strong computer skills and proficiency with MS Office products (Outlook, Word, Excel & Power Point) & various pdf editing/mark up software, • Demonstrated proficiency to do AutoCAD drawings, • Physical requirements and working conditions: Must possess mobility to work in a standard office setting including performing occasional site visits and to use standard office equipment, including a computer, stamina to maintain attention to detail despite interruptions, strength to lift and carry [files weighing up to 20 pounds]; vision to read printed materials and a computer screen, and hearing and speech to communicate in person and over the telephone. Preferred Skills: • Construction, Utility, Substation Design, or Oil and Gas Industry preferred, • Ability to multi-task and handle multiple projects, • Effective written and oral communications, • Ability to work in a team environment and coordinate with other areas to achieve goals and objectives, • Ability to effectively manage time and complete assignments on a timely basis, • Ability to develop a good understanding of Company standards, practices and procedures pertaining to engineering and design, • Work with minimum supervision, be a self-starter, be able to meet goals and deadlines on own initiative, • Be self-motivated and able to maintain deadlines of assigned project deliverables, via reports from project management scheduling software, • Developing a good understanding of Company standards, practices and procedures pertaining to engineering and design., • Understanding of cable sizing, conduit / cable, and tray fill calculations, • Knowledge of electrical power distribution and control systems design and understanding of the National Electrical Code (NEC) Your Rewards! · Medical, Dental, Vision, and Prescription Drug Insurance · Company-Paid Life Insurance · Disability Insurance · Paid Family Leave · Flexible Spending Account (FSA) · Health Savings Account (HSA) · Wellness Programs and Incentives · 401(k) Retirement Plan & Company Match · Paid Time Off – Sick & Vacation Time · Paid Holidays · Hybrid Work Schedule! · Cool Open-Office Concept Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job DescriptionSalary: Engineering Manager Houston, TX Deepwater Corrosion Services, Inc. Deepwater Corrosion Services is a global leader in subsea corrosion control, supporting offshore energy, coastal infrastructure, and renewable assets worldwide. With operations in the U.S., UK, Brazil, and Australia, we design, manufacture, and install advanced cathodic protection systems that extend asset life and reduce risk. We are seeking a high-impact Engineering Manager to lead our Houston-based engineering and field operations teams and play a key role in driving technical excellence, team development, and project delivery across the U.S. business. The Role Leadership & Team Development • Build, mentor, and lead a team of engineers and field personnel, • Drive a culture of accountability, continuous improvement, and technical excellence, • Oversee all engineering outputs: designs, calculations, specifications, and documentation, • Ensure projects are delivered on time, on budget, and to the highest quality standards, • Set priorities, allocate resources, and manage workloads across multiple projects, • Partner with manufacturing, quality, sales, and operations teams, • Support bids, proposals, and customer technical discussions, • Forecast engineering resources and manage departmental budgets, • Support business development and contribute to winning proposals, • Guide product lifecycle from concept through deployment and improvement, • Lead design reviews, risk assessments, and root cause analysis, • Improve engineering processes, tools, and systems What You Bring • Bachelors degree in Mechanical, Electrical, or related engineering field, • 7+ years of experience, including leadership responsibility, • Professional Engineer (PE) license preferred, • Strong background in corrosion engineering / cathodic protection (required), • Experience with tools such as SolidWorks, AutoCAD, PDM/PLM systems, • Proven ability to lead teams and deliver complex engineering projects, • Strong communication, problem-solving, and organizational skills, • Bonus: NACE / AMPP certifications What Makes You a Great Fit • You lead from the front and take ownership, • You balance technical rigor with practical execution, • You develop people and build strong teams, • You are proactive, solutions-oriented, and results-driven, • You thrive in a fast-paced, project-driven environment Location Houston, TX (with collaboration across global teams) Why Join Deepwater? • Be part of a global, growing company in a critical infrastructure sector, • Work on technically challenging, high-impact projects, • Join a leadership team that values innovation, accountability, and continuous improvement, • Opportunity to shape and grow a key function within the U.S. business Apply Now If you're ready to lead, build, and make a meaningful impact in a specialized engineering field, wed love to hear from you.

Job Description Primary Purpose Provide technical and organizational leadership for the electrical engineering function supporting pipeline and midstream infrastructure (compressor stations, pump stations, terminals, and related facilities). Oversee electrical engineering activities across capital and sustaining projects, ensuring safe, compliant, and reliable design, construction, and operation of electrical systems from concept through commissioning and operational handover. Serve as the internal electrical subject matter expert and ensure alignment with company standards, industry codes, and operational requirements. Responsibilities Technical Leadership & Governance • Act as the electrical engineering authority across all assigned assets and projects., • Develop, maintain, and enforce company electrical engineering standards, specifications, and best practices., • Lead multidisciplinary design reviews (30/60/90/IFC) to ensure quality, safety, operability, and maintainability., • Provide guidance on complex or non-standard electrical system designs. Project Execution • Lead electrical scope execution for capital and sustaining projects from early development through commissioning., • Define engineering deliverables and technical requirements for external engineering firms and EPC contractors., • Review and approve:, • Electrical one-lines, three-lines, and schematics, • Equipment specifications (switchgear, MCCs, transformers, UPS/DC systems, VFDs), • Load lists, cable schedules, and grounding designs, • Protective relay philosophies and coordination strategies, • Partner with project management to manage scope, schedule, budget, and risk. Power Systems & Compliance • Oversee development and review of electrical studies, including:, • Load flow and short circuit analysis, • Motor starting studies, • Protective device coordination, • Arc flash hazard analysis, • Ensure compliance with applicable standards (NEC/NFPA 70, NFPA 70E, IEEE, API, and local codes)., • Promote strong electrical safety practices across engineering, construction, and operations. Operations & Reliability Support • Collaborate with operations and maintenance teams to support:, • Troubleshooting and root cause analysis of electrical system issues, • Turnarounds, outages, and commissioning activities, • System upgrades, retrofits, and lifecycle improvements, • Drive improvements in asset reliability, standardization, and maintainability. Vendor & Stakeholder Management • Interface with utilities, equipment vendors, and third-party contractors., • Support procurement efforts through technical bid evaluations and vendor selection., • Oversee factory and site acceptance testing (FAT/SAT) and commissioning processes. Leadership & Team Development • Provide leadership, mentorship, and technical guidance to electrical engineers and cross-functional team members., • Support resource planning, workload prioritization, and performance development., • Foster a culture of safety, accountability, and continuous improvement. Governance & QA/QC • Ensure adherence to quality assurance/quality control processes., • Support Management of Change (MOC) processes and proper documentation control., • Ensure engineering deliverables meet operational readiness and handover requirements. Qualifications Minimum Requirements Education • 12+ years of electrical engineering experience in industrial facilities, such as midstream energy, oil & gas, power generation, or similar heavy industry., • Demonstrated experience supporting pipeline facilities, compressor stations, pump stations, terminals, or equivalent infrastructure., • Prior experience leading electrical engineering scopes or managing engineering teams/projects., • Strong background in:, • Medium and low voltage power distribution systems, • Motor control (VFDs, soft starters), • Switchgear, transformers, and industrial power systems, • Strong understanding of NEC/NFPA, IEEE, and related industry standards., • Ability to interpret and review engineering drawings (one-lines, schematics, P&IDs)., • Proven ability to manage multiple projects and priorities in a fast-paced environment., • Strong communication skills with the ability to influence internal and external stakeholders., • Valid driver's license; ability to travel to project and operating sites as required., • Willingness to support commissioning and critical project milestones, including non-standard work hours if needed. Preferred Qualifications • Professional Engineer (PE) license or ability to obtain., • Experience with power system modeling tools (e.g., ETAP, SKM)., • Experience conducting or reviewing arc flash and coordination studies., • Background supporting commissioning, startup, and live system troubleshooting., • Familiarity with rotating equipment systems (compressors, pumps, turbines)., • Experience developing engineering standards and supporting multi-site operations. Company DescriptionLVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities. We believe that every professional should benefit from the advice of a trusted partner throughout their career. We provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants. Each team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. Make LVI Associates your career partner; ensure your career journey is exceptional.LVI Associates exists to enable exceptional careers around the world; we connect exceptional talent, with exceptional opportunities.\r\n\r\nWe believe that every professional should benefit from the advice of a trusted partner throughout their career.\r\n\r\nWe provide that partnership to mid to senior level professionals within the Energy, Environmental & Infrastructure spaces through our network of micro-specialist consultants.\r\n\r\nEach team within LVI Associates focuses on a specialist area of Energy & Infrastructure. I specialise in sourcing and placing senior level candidates within the bridges and highway construction spaces. \r\n\r\nMake LVI Associates your career partner; ensure your career journey is exceptional.

Job Description At Vestas we are powered by the dream of changing the world. And to create a sustainable future, we are building a team of motivated visionaries. Would you like to join us? Vestas is a major wind turbine manufacturing company with significant operations in the United States. Senior Structural Engineer Responsibilities: • Is considered a regional subject matter expert on product technology around Wind Turbine structures, • Provide technical guidance to other engineers within the department and on occasion, may serve as a source of technical guidance to other engineers globally, • Respond to technical inquiries from construction, service, technical sales, and external customers, deliver responses on time and with the required level of quality, • Participate in multi-discipline teams to resolve complex structural anomalies, from root cause analysis through development of cost effective, safe technical solutions; lead segments of the team and/or project scope; prepares formal RCA reports and improvement documentation, • Perform and sometimes lead proactive component improvement projects to optimize safety, performance, and operational cost of structures and/or components for wind turbines, • Facilitate globalization of locally developed solutions and improvements, • Work with minimal supervision to perform most assignments with instructions as to the general results expected; receive technical guidance on unusual or complex problems and supervisory approval on proposed plans for projects, • Work to prevent risks to Quality, Health and Safety, and Environment, • Develop and review region-specific and global technical documentation, specifications, and drawings in support of electrical systems, • Provide technical guidance in construction-related issues regarding turbine installation, • Ensure compliance of all work with accepted industry standards and codes as well as regulatory organizations including NERC, FERC, and local ISO and utility requirements, • Train and mentor regional colleagues within area(s) of subject matter expertise, • Understand customer and operational needs and use knowledge to develop and implement technical solutions, • May present technology at conferences and is generally recognized to be a regional expert within a limited scope of subject matter expertise, • May participate in industry groups supporting wind technology Qualifications: • Bachelor of Science degree in Civil Engineering with emphasis on structural engineering or construction., • Professional Engineering License in Civil Engineering, • 4 - 10 years of experience as an Engineer, with at least 2 years' experience in Wind Turbine Generators, • Demonstrated proficiency in engineering fundamentals with an emphasis on statics, dynamics and stress analysis, • Well-developed project management and organizational skills to manage multiple projects and priorities, • Experience in systematized problem-solving methodology (8D, DMAIC, etc.), • Solid commercial experience from exposure to/understanding of customers in either sales or service, • Ability to work internationally with large demanding customers to support the business, • Demonstrated flexibility working in an environment with changing requirements, • Advanced computer skills, specifically MS Office products. High level knowledge of 2D and 3D CAD - Autocad and Creo Parametric preferred Competencies: • Ability to effectively participate in and manage a cross-functional team, • Able to complete responsibilities in a timely, professional and quality manner and effectively communicate progress and changes to timelines, • Solve problems analytically; search out relevant information and gauge its importance when making decisions, • Effective written and oral communication skills; able to express oneself clearly and in technical and non-technical terms, • Proficiency in Microsoft Office Suite computer skills (Windows, Word, Excel, Power Point, Outlook and SAP) What We Offer: We offer an exciting position with great development opportunities in an inspiring environment at the world's number one wind turbine producer. We value initiative, responsibility, and accuracy. You will become part of an international environment with a commitment to sustainability and safety and you will work among colleagues that support each other. • Attractive salary and one of the most comprehensive benefits plans in the industry, • Great benefits coverage that includes dental and vision, • Generous Paid Time Off policies, • Great 401(k) plan (with employer match), • Tuition assistance CCPA Notice for California Applicants Company DescriptionVestas is the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with +164 GW of wind turbines in 87 countries, we have installed more wind power than anyone else. Vestas24Vestas is the energy industry’s global partner on sustainable energy solutions. We design, manufacture, install, and service wind turbines across the globe, and with +164 GW of wind turbines in 87 countries, we have installed more wind power than anyone else.\r\n\r\nVestas24

Job DescriptionPurpose of the position Foxconn Technology Group, a global electronics manufacturing leader, seeks a Process Improvement Engineer to drive operational reliability and product quality by leading BGA rework equipment programming, maintenance protocols, and Control-run-managed process optimization. Responsibilities include standard operating procedure standardization, yield-driven problem resolution, client inquiry management, FACA analysis reporting, and PDCA-driven improvements to eliminate defects and boost repair efficiency. Duties and Responsibilities 1. Dynamically adjust BGA rework equipment parameters based on product requirements to ensure precision, and validate equipment stability in real-time., 2. Perform BGA device cleaning, component inspections, and preventive maintenance, document anomalies, and drive rapid fixes to avoid downtime., 3. Design standardized workflows for diverse components and validate feasibility through hands-on testing., 4. Analyze Control-Run project yield data and bottlenecks, implement improvement plans, and align outputs with customer specifications., 5. Aggregate monthly PDCA results (e.g., efficiency gains, cost optimizations), analyze gaps, plan next steps, and communicate progress to clients to address technical queries, ensure compliance, and strengthen trust., 6. Adhere to company policies and Standard Operating Procedures in all operational workflows. Education and work experience 1.Successful completion of 4-years of high school, or equivalent, plus completion of 4 years of college with a bachelor’s degree, plus attainment of a master’s degree. Degree required: Electrical Automation Engineering 2. 3 to 8 years of experience in Automation, Mechanical Engineering, or Electronics sectors Working conditions • Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork., • Employees are continuously encouraged to learn and grow their careers in smart manufacturing.Skills: 1. End-to-end electronics manufacturing expertise with hands-on SMT assembly and wave soldering optimization to resolve production bottlenecks and drive process efficiency. U2ILSXUmId

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, data center, environmental, food & beverage, pulp & paper, material handling, oil & gas, pharmaceutical, renewables, metals, and utility markets. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: The Manufacturing Engineer is responsible for designing, implementing, and optimizing manufacturing processes to ensure efficient, high-quality, and cost-effective production. This role partners with cross-functional teams including production, quality, and supply chain to drive continuous improvement, support new product introductions, and solve complex production challenges. Requirements • Bachelor’s degree in mechanical, Industrial, Manufacturing, or Electrical Engineering, or a related field., • 3–7 years of experience in a manufacturing environment, preferably in switchgear, electrical, or industrial equipment manufacturing., • Strong knowledge of Lean Manufacturing, Six Sigma, or continuous improvement methodologies., • Experience with process design, workflow optimization, and production planning., • Proficiency with CAD software and manufacturing simulation tools., • Strong problem-solving skills and ability to work cross-functionally., • Excellent communication and documentation skills., • Develop, evaluate, and improve manufacturing processes to increase efficiency, reduce costs, and maintain quality standards., • Collaborate with product design and engineering teams to support new product introductions, including process design, prototyping, and validation., • Conduct time studies, workflow analyses, and capacity planning to optimize production lines., • Troubleshoot manufacturing issues, implement corrective actions, and provide technical support to production teams., • Develop and maintain process documentation, work instructions, and standard operating procedures (SOPs)., • Implement Lean Manufacturing and continuous improvement initiatives to enhance productivity and reduce waste., • Coordinate with maintenance and quality teams to ensure equipment reliability and compliance with safety standards., • Support automation initiatives and evaluate new manufacturing technologies for feasibility and ROI., • Monitor production metrics and provide data-driven recommendations for process improvements., • Experience with automation, robotics, or smart manufacturing technologies., • Knowledge of quality standards (ISO 9001, UL, or equivalent)., • Ability to lead projects and mentor junior engineers. Key Competencies: • Analytical thinking and process optimization, • Attention to detail and quality focus, • Effective collaboration and teamwork, • Project management and organizational skills, • Adaptability and continuous learning mindset Benefits • Medical, dental, vision, HSA, term life, AD&D, STD, LTD, • 100% medical premium paid for by Panelmatic for the employee-only level medical coverage, • 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage ( employee plus child, employee plus spouse, family), • 401K, contributions matched 100% up to 4%, • Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided, • PTO and paid holidays provided, • Career advancement opportunities, • Competitive wages, • Family-friendly environment with average employee tenure above five years

Job Description Title: Electrical Maintenance & Reliability Engineer Location: Pasadena, TX Who we are: Voted one of the Nation's Best and Brightest Companies to Work for, Kuraray America, Inc. (KAI) is a global leader in specialty chemical, fiber, and resin production. With top-of-the-line research and production facilities and a vast network of supplies from around the world, Kuraray leads the industry in specialty dental, fiber, resin, and elastomer products. Kuraray America is a wholly owned subsidiary of Kuraray Company, Ltd. Based in Tokyo, Japan. Kuraray has operations in 32 countries and employs more than 11,000 employees, including over 800 in the United States. Why Kuraray: Kuraray is building a better tomorrow, today. Our team members are dedicated to expanding our business with committed professionals who share essential values such as integrity, excellence, teamwork, and accountability. As a part of Kuraray America, Inc., our team shares the advantages of working for the leader in specialty chemicals, resins, and fibers. Our international presence and resources allow us to be a world-leading innovator in the industries we service. Yet, despite our size, our people are more than just a number. As a new team member, you can expect to earn responsibility quickly. Our commitment to our people is visible in our comprehensive benefits package. As a Kuraray team member, you will have the opportunity to enjoy competitive salaries and benefits, incentive opportunities, and an excellent work environment. Position Summary: The Electrical Maintenance & Reliability Engineer is responsible for maintaining, troubleshooting, and improving the plant's electrical, instrumentation, and process control systems to ensure safe, reliable, and efficient operation. This role provides hands-on technical support, leads equipment reliability initiatives, and partners with Operations, Maintenance, and Project teams to minimize downtime, extend equipment life, and drive continuous improvement. Responsibilities: Maintenance & Troubleshooting • Provide day-to-day technical support to resolve electrical, instrumentation, and control system issues impacting plant operations., • Troubleshoot failures involving motors, drives, MCCs, transformers, sensors, and control systems., • Lead root cause failure analysis (RCFA) and implement corrective/preventive actions., • Develop and optimize preventive and predictive maintenance programs for electrical and instrumentation assets., • Design, specify, and oversee installation or upgrades of electrical and instrumentation systems including control valves, transmitters, analyzers, interlocks, 480VAC starters, 120VAC/24VDC circuits, and VFDs., • Review and update I&E drawings, specifications, and single-line diagrams., • Manage contractors for electrical and instrumentation projects; ensure work meets codes, standards, and plant specifications., • Provide first-level troubleshooting and maintenance of DCS systems and related field instrumentation., • Configure and maintain control loops, interlocks, signal inputs/outputs, and communication protocols (Foundation Fieldbus, Profibus, Modbus, wireless)., • Coordinate system updates, backups, and minor modifications to improve process reliability and operability., • Analyze equipment performance data to identify reliability risks and develop improvement plans., • Apply reliability tools such as FMEA, RCM, and life-cycle analysis to optimize asset performance., • Support capital projects by providing technical input to design, commissioning, and maintenance readiness., • Act as the primary technical advisor and functional lead for all I&E personnel in Maintenance., • Collaborate with Operations to improve safety, yield, and overall plant performance., • Support Process Safety Management (PSM) initiatives including MOC, PHA participation, and incident investigations., • B.S. in Electrical, Instrumentation, or Chemical Engineering, • Minimum 5 years of instrumentation and electrical maintenance experience in a chemical, refining, or industrial manufacturing environment., • Working knowledge of Yokogawa DCS (other platforms such as DeltaV, Honeywell, or ABB a plus).., • Knowledge of discreet, continuous, and sequential control, loop tuning, adaptive control, and feed-forward control modeling., • Proven ability to diagnose, troubleshoot, and resolve equipment and process issues., • Familiarity with key PSM elements including Process Hazards Analysis, Process Technology, Management of Change, and RAGAGEP., • Demonstrated ability to lead, mentor, and coach team members in a collaborative environment., • Strong project management skills with the ability to prioritize and manage multiple complex, time-sensitive projects., • Excellent technical writing, interpersonal, and communication skills., • Self-motivated with initiative and the ability to work independently., • Proficient in Microsoft Office (Word, Excel, PowerPoint). Competencies: • Customer Focus, • Building strong customer relationships and delivering customer-centric solutions., • Business Insight, • Applying knowledge of business and the marketplace to advance the organization's goals., • Cultivates Innovation, • Creating new and better ways for the organization to be successful., • Action Oriented, • Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm., • Ensures Accountability, • Holding self and others accountable to meet commitments., • Drives Results, • Consistently achieving results, even under tough circumstance, • Collaborates, • Building partnerships and working collaboratively with others to meet shared objectives., • Values Difference, • Recognizing the value that different perspectives and cultures bring to an organization, • Communicates Effectively, • Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences., • Courage, • Stepping up to address difficult issues, saying what needs to be said., • Instills Trust, • Gaining the confidence and trust of others through honesty, integrity, and authenticity., • Situational Adaptability, • Adapting approach and demeanor in real time to match the shifting demands of different situations. We offer a competitive compensation package that includes base pay and an annual incentive. This program is designed to reward individual performance and align overall rewards with corporate and team performance. Our employees benefit from a robust healthcare package that includes wellness reimbursements, along with generous perks such as three weeks of paid time off, ten company holidays, paid parental leave, education reimbursement, and a matching 401k plan, among other offerings. Applicants must be authorized to work for ANY employer in the U.S. Learn more at kuraray.us.com/careers/ Kuraray America, Inc. is an Equal Employment Opportunity/disability/protected veteran status No third-party candidates accepted. Job Posted by ApplicantPro

Job Description Mid-level Instrument Engineer and Senior Structural Engineer positions. Seeking a Instrument Engineers to support the design, specification, and technical oversight of instrumentation systems for offshore fixed platforms and wellhead facilities. This role works on projects across the globe, particularly the Americas. KEY RESPONSIBILITIES · Develop and review Piping & Instrumentation Diagrams (P&IDs) in coordination with process engineering, ensuring proper instrument representation, tag numbering, and symbology per ISA-5.1 and API. · Prepare and maintain instrument index / instrument lists, including tag numbers, service descriptions, ranges, set points, and instrument data sheets. · Develop Cause & Effect diagrams (C&E matrices) for process shutdown systems (PSD/ESD), fire & gas detection systems, and blowdown/depressurization logic. · Specify and select field instruments including transmitters, control valves, pressure/temperature/level/flow devices, and analyzers appropriate for offshore hazardous area classifications. · Prepare instrument specification sheets and requisitions; evaluate vendor proposals and technical bids for compliance with project specifications and applicable codes. · Review and approve vendor deliverables including instrument data sheets, wiring diagrams, installation drawings, calibration procedures, and factory acceptance test (FAT) documentation. · Support the development of instrument cable schedules, junction box arrangements, and marshalling panel layouts. · Coordinate with PCS/PLC vendors on I/O allocation, signal types, and communication protocol requirements (HART, Foundation Fieldbus, Modbus, etc.). · Perform instrument sizing calculations (control valves, orifice plates, relief valves in coordination with process) using industry-standard software. · Participate in HAZOP, SIL assessment, and other safety reviews; incorporate findings into instrument design and safety instrumented system (SIS) specifications. · Support construction, pre-commissioning, and commissioning activities including instrument loop checks, calibration verification, and punch-list resolution. · Ensure all designs comply with applicable codes and standards (see below). · Maintain organized project files, transmittals, and revision tracking per company and client document control procedures. CODES, STANDARDS & REGULATIONS · ISA-5.1, ISA-20 · ISA 84/IEC 61511 · API RP 14C, API RP 14F · API RP 550/551/552 (Process Instrumentation and Control) · API RP 554 (Process Control Systems) · API 500/505 (Hazardous Locations) · API RP 14F, API RP 14G and API 500 PREFERRED Knowledge of: · 30 CFR 250 (BSEE Regulations) — as applicable to instrument and safety system requirements on OCS facilities · IEC 60079 series (Explosive Atmospheres — Equipment Protection) — familiarity with Zone classification and Ex certification VENDOR & DELIVERABLE MANAGEMENT · Prepare technical bid evaluations (TBEs) for instrument equipment and packages. · Review vendor drawings, data sheets, manuals, and test reports for technical accuracy and specification compliance. · Attend and witness Factory Acceptance Tests (FATs) for critical instrument packages (e.g., metering skids, package equipment, ICSS panels). · Coordinate with vendors on technical clarifications, deviations, and non-conformance resolutions. · Manage instrument material tracking and expediting in coordination with procurement. REQUIRED QUALIFICATIONS · Bachelor's degree in Instrumentation Engineering, Electrical Engineering, Chemical Engineering, or related engineering discipline. · 10+ years of experience in instrumentation engineering, with a minimum of 5 years in offshore oil & gas · Demonstrated experience with P&ID development/review, instrument index/data sheets, and C&E matrix preparation. · Working knowledge of DCS/PCS, PLC, and ESD/PSD system architectures. · Familiarity with hazardous area classification (NEC Division/Zone and IEC Zone systems). · Strong written and verbal communication skills. · PREFERRED QUALIFICATIONS & EXPERIENCE · Professional Engineer (PE) license or Engineer-in-Training (EIT/FE) with PE licensure path. · Experience with SmartPlant Instrumentation (SPI/Intools) database management. · Proficiency with instrumentation sizing tools (e.g., ISA control valve sizing, Fisher Spec-IT, orifice plate calculations). · Familiarity with Networking and Telecom architecture · International standards awareness (IEC 60079, IEC 61892, ATEX) for international project support. Company DescriptionTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry. Specialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, AdministrativeTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry.\r\n\r\nSpecialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, Administrative

Job Description POSITION SUMMARY Seeking an Electrical Engineer to serve as a technical lead for electrical power system design on offshore fixed platforms, wellhead facilities, and production systems. This individual will provide senior-level technical direction across all project phases — from conceptual/FEED through detailed design, procurement support, construction, and pre-commissioning. The role requires independent engineering judgment, mentoring of junior staff, and the ability to interface directly with clients, classification societies, and regulatory authorities. KEY RESPONSIBILITIES · Serve as Electrical Lead or Electrical Technical Authority on major projects, responsible for the technical quality, schedule, and budget of all electrical engineering deliverables. · Develop and maintain project electrical design basis, specifications, and philosophies (power system philosophy, electrical safety philosophy, area classification philosophy). · Lead the development of single-line diagrams, power distribution architecture, and emergency power strategies for offshore facilities. · Perform and/or oversee comprehensive power system studies: load flow, short-circuit, motor starting, harmonic analysis, transient stability, and protective device coordination using ETAP or equivalent. · Familiarity to coordinate arc flash hazard analyses per IEEE 1584/NFPA 70E; develop arc flash labels and PPE requirements; present findings to operations and safety personnel. · Design and specify medium-voltage (4.16kV–13.8kV) and low-voltage (480V and below) power distribution systems, including generator paralleling, bus transfer schemes, and load shedding strategies. · Oversee hazardous area classification drawing development; ensure compliance with API RP 500, EI/IP 15 and IEC 60079-10 as applicable. · Specify and evaluate major electrical equipment packages: turbine/diesel generators, Natural Gas Generators, power transformers, medium-voltage switchgear, low-voltage switchgear/MCCs, VFDs, Solar panels, UPS systems, and battery systems. · Lead or oversee cable engineering: sizing, routing, tray/conduit design, penetration schedules, and fire-stop specifications. · Oversee grounding system design (equipment grounding, system grounding, lightning protection, static grounding) and coordinate with corrosion/cathodic protection engineering. · Provide technical direction to mid-level and junior electrical engineers; review their calculations, drawings, and specifications for quality and code compliance. · Represent the electrical discipline in HAZOP, safety reviews, constructability reviews, and 3D model reviews. · Interface directly with clients, client electrical engineers, classification societies (ABS, DNV, Lloyd's), and regulatory bodies (BSEE, USCG) on technical matters. · Support proposals and cost estimation for electrical engineering scope on new project bids. · Lead pre-commissioning planning for electrical systems: develop test procedures, witness generator testing, switchgear testing, relay commissioning, and system energization. CODES, STANDARDS & REGULATIONS · NFPA 70 (NEC) — comprehensive knowledge, especially Articles 500–506 (Hazardous Locations), 430 (Motors), 450 (Transformers), 480 (Batteries), 700/701/702 (Emergency/Standby Systems) · API RP 14F, API RP 14G and API 500 PREFERRED Knowledge of: · IEEE Applicable Electrical standards · IEC 60079 and IEC 61892* · 30 CFR 250 (BSEE Regulations) - electrical system requirements for OCS facilities · UL, CSA, and ATEX/IECEx certification requirements for electrical equipment VENDOR & DELIVERABLE MANAGEMENT · Lead technical bid evaluations (TBEs) for all major electrical packages; make formal vendor recommendations to project management. · Manage vendor document review workflows; mentor junior engineers on vendor review expectations and standards. · Lead Factory Acceptance Tests (FATs) for generators, switchgear, transformer packages, and MCC assemblies. · Negotiate technical scope, deviations, and non-conformances with vendors and clients; ensure NCR resolution prior to shipment. · Review and approve vendor O&M manuals, spare parts lists, and as-built documentation for project turnover packages. REQUIRED QUALIFICATIONS · Bachelor's degree in Electrical Engineering or Electrical/Power Engineering from an accredited program. · 10+ years of experience in electrical engineering, with a minimum of 5 years in oil & gas and/or offshore. · Proven track record as Electrical Lead or Electrical Technical Authority on EPC or FEED projects. · Expert knowledge of power system studies (load flow, short-circuit, coordination, arc flash, motor starting, harmonic analysis) and proficiency with ETAP or equivalent tools. · Deep knowledge of NEC, IEEE standards, and API RP 14Fas applied to offshore electrical design. · Strong knowledge of hazardous area classification (NEC Division and IEC Zone systems) and appropriate equipment selection. · Experience specifying and evaluating medium-voltage and low-voltage power distribution equipment from major manufacturers (Siemens, ABB, Eaton, Schneider, GE, Caterpillar, etc.). · Experience with electrical design tools · Excellent client-facing communication skills; ability to present technical findings and lead design reviews. PREFERRED QUALIFICATIONS & EXPERIENCE · Professional Engineer (PE) license strongly preferred · Experience with power generation studies: generator sizing, load shedding logic, black-start procedures, and islanded power system operation. · Experience with subsea electrical systems (subsea power distribution, umbilical electrical cores) · Experience with electrical heat tracing system design. · International standards awareness (IEC 60079, IEC 61892, ATEX) for international project support. Company DescriptionTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry. Specialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, AdministrativeTaylor Technical Services began business in 1977. Since then, we have grown to become one of the largest suppliers of Engineering personnel in the Houston/Gulf Coast area and Alaska. We pride ourselves in having recruiters and account managers that have experience and have worked in the oil & gas engineering industry.\r\n\r\nSpecialties: Cad Drafters, Electrical Designers, Instrument Designers, Structural Designers, Piping Designers, Electrical Engineers, Instrument Engineers, Structural Engineers, Mechanical Engineers, Pipe Stress Engineers, EH&S, QA/QC, Procurement, Project Controls, Document Control, Administrative

Job Description Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you! We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. We have an exciting opportunity for an EMI/EMC Engineer/Analyst - Space Exploration Avionics System to join our JETS II contract team at NASA Johnson Space Center in Houston, TX. If selected you will: • Report directly to the Electronics and Electrical Section Manager as part of a group of 45 other Electronics and Electrical Engineers., • Work with NASA engineers and industry partners to support spaceflight avionics systems., • Assist in planning, executing, and analyzing EMI/EMC tests on electronic hardware at NASA JSC and external facilities., • Contribute to test plans, procedures, and reports, while learning from experienced EMI/EMC engineers., • Support design reviews, risk assessments, and system integration across avionics, power, RF, and mechanical teams., • Gain hands-on experience with test equipment, circuit design reviews, and EMI/EMC compliance methods. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a bachelor's degree in Engineering and a minimum of 2-5 years of experience in the field or in a related area., • Typically requires a bachelor's degree in Engineering and a minimum of 2-5 years of experience in the field or in a related area.BS degree or higher in Physics, Electrical/Electronic Engineering, Systems Engineering, or related field from an accredited institution with 2-10 years of experience., • BS degree or higher in Physics, Electrical/Electronic Engineering, Systems Engineering, or related field from an accredited institution with 2-10 years of experience., • Strong analytical background with solid understanding of electronic systems, electromagnetic principles, or system integration., • Hands-on experience or familiarity with lab test equipment (e.g., oscilloscopes, signal generators, spectrum analyzers, RF amplifiers, multimeters, etc)., • Excellent communication skills and ability to work within cross-functional engineering teams., • Exposure to or coursework in RF systems, shielding/filtering, grounding, or signal integrity., • Understanding of key EMI/EMC concepts such as radiated/conducted emissions, susceptibility, electrostatic discharge (ESD), and crosstalk., • Experience reviewing schematics, PCB layouts from academic or professional projects., • Familiarity with tools like SPICE, Matlab/Simulink, LabVIEW, and EMI simulation tools., • Knowledge of MIL-STD-461 or other EMI/EMC test and design standards., • Interest in working in spaceflight environments (avionics, spacecraft systems)., • Exposure to systems integration or multi-disciplinary engineering teams., • Competitive pay, • Positive work-life balance, • 100% Employer paid insurance including: Medical, dental, vision, life insurance, accidental death and dismemberment, short-term disability, and long-term disability, • 11 paid holidays annually, • Generous PTO, • 401k after 12 months of service with employer match, • Education assistance US Citizenship and the ability to pass a comprehensive security background investigation is required. Mclaurin is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status or other characteristics protected by law.

Job DescriptionPurpose of the position Foxconn Technology Group, a global leader in electronics manufacturing, is hiring an Automation Maintenance Engineer to drive innovation, optimize high-precision systems, and ensure seamless production continuity. Once a part of the team you will have opportunity to lead automation optimization and design validation, eliminating root causes to boost capacity and reliability. Empower teams via data-driven standard operating procedures to align execution with customer needs and sustain improvements. Duties and Responsibilities 1. Diagnose root causes of equipment failures, implement corrective actions, and enhance stability/reliability., 2. Lead mechanical system design, drafting, and prototype testing to ensure manufacturability and process compliance., 3. Assess technical and cost feasibility of automation options, drive process optimizations to eliminate bottlenecks and boost capacity., 4. Gather testing data, produce structured reports to inform decisions, and ensure alignment with customer/quality standards., 5. Develop standardized workflows (standard operating procedures), and deliver hands-on training to technical teams to reduce execution gaps and recurring issues., 6. Adhere to company policies and Standard Operating Procedures in all operational workflows. Education and work experience • Bachelor's degree or above in Mechanical Design and Manufacturing with Automation, Electrical Engineering with Automation, or related fields., • 1 to 3 years of experience in maintenance of automated testing equipment.Working conditions, • Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork., • Employees are continuously encouraged to learn and grow their careers in smart manufacturing. Skills: 1. Proficiency in PLC programming, C-language-based control systems, and design tools (CAD/ProE/SW/UG preferred); dbvOg1clVu

Job Description The Facility Instrumentation and Controls Engineer will support the space program located in Houston, Texas (77058). You will join a multidisciplinary team responsible for designing, integrating, and operating complex test systems that simulate spacecraft and planetary environments. This role is suited for candidates enthusiastic about hands‑on engineering, control system integration, laboratory testing, and supporting technology development for human spaceflight. RESPONSIBILITIES: • Design, build, and troubleshoot electrical and control systems for ground test facilities, including data acquisition and control, instrumentation, and safety interlock systems., • Develop PLC- and HMI-based control architectures for automated test operations, vacuum systems, fluid loops, thermal systems, environmental chambers, or life‑support test rigs., • Produce engineering documentation including electrical schematics, wiring diagrams, panel layouts, and test procedures in compliance with NASA and JSC safety standards., • Integrate sensors, instrumentation, and data acquisition hardware for facility monitoring and test-article evaluation., • Support end‑to‑end system checkout, functional testing, verification/validation, and facility readiness activities., • Troubleshoot facility components such as pumps, valves, relays, pressure/temperature instrumentation, and power electronics elements., • Collaborate closely with mechanical, thermal, power, and test engineering teams to support human spaceflight development projects., • Participate in design reviews, hazard analysis, work planning, and configuration management., • Operate test facilities during engineering evaluations, technology development campaigns, and mission-support activities., • Other duties as assigned. REQUIRED: This position has been posted at multiple levels (must meet minimum level indicated). Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • This position requires U.S. Citizenship due to the sensitivity of the customer related information., • This position requires experience in the space industry or Department of Defense/Department of War., • This position requires a bachelor's degree in engineering., • Demonstrated experience with:, • Troubleshooting of electrical and instrumentation systems., • Electrical wiring schematics and control panel design., • Test facility or laboratory environment work. WORK LOCATION: • This position is located onsite and offers a 9/80 schedule with every other Friday off; some travel may be required., • Schedules are subject to change based on the requirements of the position and/or customer needs. BACKGROUND INVESTIGATIONS REQUIRED: All Bastion employees must be able to pass a national agency check and some positions require clearance and will require an extensive background verification/check process. DRUG AND ALCOHOL SCREENING REQUIRED: All Bastion employees must be able to pass a pre-employment drug screen and are required to participate in periodic random drug and alcohol screenings. STANDARD BASTION REQUIREMENTS: • Must have experience with Microsoft Office Suite, Word, Excel, PowerPoint, and TEAMS., • All of Bastion's employees must be team players with strong work ethics and must be culture oriented., • Able to communicate effectively, verbally and in written form, with internal and external customers., • Able to follow company programs, processes, procedures, practices, requirements, goals, and objectives., • Must be organized with good time management skills and must be able to work outside normal schedule and adjust schedule to meet peak periods and surge requirements., • Generally, an office environment, but can involve inside or outside work depending on the task., • Work may involve sitting or standing for extended periods (90% of the time) and may require lifting and carrying up to 25 lbs. (5% of the time)., • Regular attendance in accordance with an established work schedule is critical. BASTION BENEFITS: Bastion offers a wide range of benefits for their full-time employees; medical, prescription, dental, vision, AD&D, disability benefits, life insurance, retirement 401k, vacation, sick pay, holidays, flexible work schedules (when available), along with many other options. We also support career advancement through professional training and development. ABOUT BASTION: Bastion offers career opportunities with competitive benefits, exciting possibilities for advancement, and an exceptional work environment; the well-being of our employees is a priority, and our flexibility allows our employees a great work life balance. Our culture is based on strong business ethics, integrity, and professionalism. Our team members are known for their initiative and high-quality work. When it comes to our employees, we value, respect, and help them grow in their careers. WORKPLACE EXCELLENCE: At Bastion, we are passionate about our people and our safety culture. Individual thoughts, opinions, and perspectives bring value and help us develop solutions for challenging problems, they make us more inventive, and more resilient. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status. Bastion participates in e-Verify. #EntryLevel #LI-DNI BT-26099 Job Posted by ApplicantPro

Job Description Rev. March 2026 Title: Sr. Process Engineer Location: Remote Reports to: Vice-President of Product & Process Employment Type: Full-time Qualifications: Bachelor’s Degree, 10+ years of experience Basic Function The Sr. Process Engineer–is a highly experienced Senior Process Engineer with a strong background in high rate anerobic treatment systems(EGSB, UASB and etc), aerobic membrane reactors (MBRs), and biological nutrient removal processes. The ideal candidate will have hands-on experience in process engineering, with a focus on designing, optimizing, and implementing advanced water treatment solutions. This position will be responsible for creating preliminary and final process designs and will be responsible for coordinating small to mid-scale projects and will bring an understanding of water and wastewater treatment technologies, specifically high rate anaerobic treatment (EGSB and UASB), dissolved air flotation, and MBR and nutrient removal processes. Additionally, the candidate must be capable of working with a team of project managers and building relationships with potential clients and vendors. The Process Engineer must have experience in water or chemical process design, strong communication and selforganizing skills. Top candidates will have a passion for sustainability and the environment, will thrive in a fast-paced entrepreneurial setting, will be self-motivated, and will have an interest in cutting edge technology. Think big, think different, be ambitious, and consider joining a company that values honesty, creativity, excellence in building a world class operation, and proactively protecting the environment. Typical Duties • Function as a biological wastewater treatment expert, • Lead the system design, installation, and start up., • Provide system data analysis., • Create O&M manuals., • Provide troubleshooting and maintenance of biological wastewater systems at customer sites., • Preparation of general equipment specifications, PFD, mass balances, load list, component specifications, controls overviews, major equipment lists, equipment layouts, controls narratives and power consumption at different conditions with respect to guaranteed parameters., • Support facility engineer and controls engineer for PID, system layout and electrical one-line., • Create basis of design documents with information passed on from the applications/sales team. *The above designs include the selection of process and process calculations, membrane selection, filters selection, pump and blower selection, instrumentation selection, hydraulic calculations, pressure drop calculation, line sizing etc. 1 • Prepare RFQ documents with procurement, scopes of work, datasheets, etc. for valves, pumps, blowers, membranes, and other engineering items with proper selections required for anaerobic, BioViper, MBR and RO projects and bids., • Support preparation of Control philosophy, O&M manual, commissioning book for the execution of the projects, • Interact closely with controls engineer to help in logic development for FAT and SAT, • Take part in the Commissioning activities of the project., • Support product development activities and interface with stakeholders to report on progress., • Support new customer site installations and troubleshooting of existing customer sites operations., • Interface with Sales, Applications Engineering and Project Execution to support ongoing project efforts., • Support procurement with sourcing and manufacturing efforts. • Travel to sites to support projects and field activities. Responsibilities • Process design for each assigned project from preliminary to finalization to make sure all reactors and equipment are sized correctly and selected economically., • Controls narrative for assigned project to make sure the process control is clearly described to controls engineer for programming., • Wet testing during system commissioning to make sure all pre-conditions are met., • Technical instruction for system inoculation and start up., • Site performance for assigned customer sites to make sure no process issue affecting the system performance. • Biological wastewater treatment system troubleshooting on any customer sites when needed. Required Qualifications • Bachelor’s degree in engineering, • 10+ years of process design & integration experience, preferably in the food and beverage or water and wastewater industry (both aerobic and anaerobic systems along with membrane treatment systems), • Extensive experience in design, installation, start up, operation, troubleshoot and maintenance EGSB, UASB and/or other biological waswtewater treatment systems., • Experience in analysis of wastewater treatment plants, water audit for industries and related issues., • Ability to develop productive, long-term relationships and communicate with clients, peers, multi-discipline teams., • Understanding of basic fabrication techniques, • Stellar written and verbal communication skills • Professional Engineer (PE) license preferred. Travel Required • 10-30% to customer sites as needed About Cambrian Cambrian Innovation is a commercial provider of distributed water reuse, energy recovery and wastewater treatment solutions. Cambrian’s pioneering WEPA™ is a pay-by-the-gallon contract for commercial and industrial customers globally, ensuring cost-effective and sustainable wastewater treatment, water reuse, and clean energy generation. As we continue our track record of excellence with purpose, and we expand to serve new industries and new geographies, we are dedicated to helping our employees develop rewarding and creative careers. What You Can Expect from Cambrian • A supportive, highly collaborative, team-oriented environment, • Opportunities to make a difference and be recognized., • Growth and development with a leader in the industry, • Ability to work with bright, innovative, and forward-thinking colleagues.

Job Description Reports to: VP of Engineering Fleetzero is electrifying global maritime shipping with marine-grade lithium-iron-phosphate battery systems built for the harshest environments on the planet. Our Leviathan battery platform is in active ABS Product Design Assessment, with hardware on test rigs today and production hardware shipping in the near term. We are hiring a Senior Test Engineer to take full ownership of our battery test program: The rigs, the procedures, the automation, and the evidence packages that turn engineering work into class-approved, vessel-ready hardware. This is a hands-on role for an engineer who is equally comfortable wrenching on a fixture at 6 AM, debugging a CAN trace at noon, and presenting a thermal propagation test report to an ABS surveyor at 4 PM. You will own our hardware-in-the-loop (HIL) infrastructure, our cell/module/system-level test cells, and the requirements-to-evidence traceability that holds the whole program together. You will work shoulder-to-shoulder with our hardware, firmware, and systems teams to design tests early, fail hardware fast, and produce documentation that is self-explanatory to a first-time reader. If you have ever looked at a battery abuse test cell and thought "I could run this better," this is your job.What you'll do * Own the test rigs. Take full responsibility for our existing cell, module, and pack-level test stations: cyclers, environmental chambers, abuse test enclosures, HV safety systems. Improve them. Document them. Make them auditable. * Stand up our HIL program. Architect and build hardware-in-the-loop infrastructure to validate BMS firmware (CMU/PMU/SMU layered architecture) against simulated cell, contactor, and vessel-level fault conditions. Drive HIL coverage upstream into the firmware development cycle. * Author the test program. Write test plans, procedures, and reports for characterization, verification, validation, and abuse testing: including thermal propagation, overcharge, over-discharge, external short circuit, vibration, IP ingress, and thermal cycling. Make every report stand on its own as ABS evidence. * Run witness testing. Execute ABS and USCG witness tests on-site, including pre-test dry runs, surveyor walkthroughs, and post-test documentation packages. * Build traceability. Tie every test case back to a requirement, every result back to a test case, and every certificate back to a result. Help us mature requirements-to-test traceability tooling across the engineering organization. * Automate and instrument. Develop Python (or equivalent) automation for cycler control, DAQ, post-processing, and report generation. Eliminate manual data wrangling wherever it shows up. * Diagnose failures. Lead root-cause investigation when hardware fails on the bench, in qualification, or in the field. Translate findings into design and process changes. * Grow the function. Help shape Fleetzero's test engineering culture as we scale from R&D into production. Mentor junior engineers and technicians as the team grows around you. What you bring * Degree in Electrical Engineering, Mechatronics, or related field, or equivalent hands-on experience. We care about what you can do, not where you sat for four years. * 5+ years of test engineering experience in batteries, energy storage, EV powertrains, aerospace, or another safety-critical hardware domain. * Direct, hands-on experience with battery cyclers (Arbin, Maccor, Bitrode, Chroma, or equivalent) at the cell, module, or pack level. * HIL experience using NI, dSPACE, Speedgoat, or equivalent platforms, and a clear point of view on what makes a HIL test rig actually useful versus merely impressive. * Comfortable working around high-voltage DC systems. You know what an arc flash boundary is and you respect it. * Strong scripting and data analysis skills in Python (preferred), MATLAB, or LabVIEW, including comfort building test automation from the ground up. * Working knowledge of CAN, RS-485, Modbus, and other industrial communication protocols. * Clear technical writing. Your test reports do not require a phone call to interpret. Nice to have * Experience supporting class society (ABS, DNV, Lloyd's, BV) or regulatory (USCG, Coast Guard, FAA, NHTSA) witness testing. * Familiarity with UL 1973, UL 9540A, IEC 62619, UN 38.3, or equivalent battery safety standards. * Functional safety background (IEC 61508, ISO 26262, or marine equivalents). * Experience building out a test lab from scratch: Fixturing, safety systems, fire suppression, ventilation, HV lockout-tagout. * Marine, naval, or shipboard experience. Bonus points if you have ever stood a watch. How we work We are a small, dense engineering team in Houston. We test early, test often, and break hardware on purpose. We work in person because integration problems live in the gaps between disciplines, and the gaps close faster when you can walk over to the next bench. We document because the next person who reads our work might be a class surveyor, a customer's chief engineer, or a future version of ourselves at 2 AM in a shipyard. Our team includes mariners, fabricators, software engineers, sales people. We respect the trades and the textbooks equally. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description LZT is seeking an experienced Software Engineer to support NASA’s Johnson Space Center in the development, testing, and flight certification of a digital wireless camera for the Orion spacecraft. This role involves full lifecycle embedded software development—from prototyping and requirements definition to integration and certification. We’re looking for a self-motivated engineer with strong communication skills, technical expertise, and a passion for space exploration. The ideal candidate thrives in collaborative environments, adapts quickly to new challenges, and can clearly articulate complex technical concepts. Key Responsibilities: • Develop and maintain Orion Wireless Camera (OWC) flight software, • Design and maintain the OWC GUI for commands and telemetry, • Develop and manage the OWC Command and Data Dictionary (CDD), • Create automated test scripts for unit, integration, and verification testing, • Support systems engineering tasks related to software requirements and interfaces, • Perform software integration, testing, and flight certification, • Collaborate across NASA programs and contractor teams, • U.S. Citizen or Permanent Resident, • B.S. in Computer Science, Software Engineering, Electrical/Computer Engineering, Aerospace Engineering, Biomedical Engineering, or related field, • 3+ years of software development experience, • Proficiency in C and Python, • Experience in Linux development environments, • M.S. in relevant engineering discipline, • Aerospace systems experience (Orion, ISS, Shuttle, Commercial Crew), • GTK programming, • Bus communication protocols (1553, RS-422, RS-232, USB, Ethernet), • NASA Core Flight Software (CFS) and Orion DEM packets, • GitLab CI/CD pipelines, Docker, Makefiles, CMake, • Git version control, Jira, • Automated testing and documentation (CDD, SRS, user guides, test plans), • Familiarity with CMMI Level 3+ processes We are currently identifying top talent for potential roles supporting NASA’s Moon to Mars mission. While this position is in the early stages of recruitment, we are proactively conducting candidate outreach and preliminary screenings. If you're passionate about space exploration and eager to contribute to this groundbreaking initiative, we encourage you to apply now to be considered once the role is finalized. About LZT: LZT is an emerging engineering and technical services firm supporting government programs including NASA, NSF, and DoD, as well as commercial clients. We foster innovation, continuous improvement, and a culture built on leadership, safety, quality, and creativity. LZT is an Equal Opportunity/Affirmative Action Employer – Females/Minorities/Protected Veterans/Individuals with Disabilities.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leading innovator in distributed energy, redefining how critical infrastructure secures reliable power. Operating at the forefront of the evolving electric grid, the company delivers on-site energy solutions that combine flexibility, fast response, and cost efficiency to meet the demands of modern power systems. By designing, operating, and integrating advanced generation and microgrid technologies, Enchanted Rock provides bridge power to critical facilities like data centers, delivers highly reliable backup power during outages, and supports the grid through flexible, dispatchable operations. This approach enables continuous operations, improves reliability, lowers energy costs, and reduces environmental impact – transforming distributed generation from simple backup power into a high-performance, grid-supporting solution. What you’ll do: The Solutions Engineer serves as a technical lead in developing power system solutions for customer-facing proposals, owning system architecture, technical scope, and customer engagement from early-stage design through handoff to the execution team. This role focuses on microgrid and distributed generation systems, designing under real-world constraints of cost, reliability, and schedule. This is a highly applied, customer-facing role for engineers with a strong foundation in electrical power systems who prefer system-level design over purely analytical work. Solutions Engineers lead technical discussions, conduct site visits, and develop single-line diagrams and system layouts, while clearly communicating complex concepts through structured documentation and analysis. Key Responsibilities: • Lead development of microgrid and distributed generation solutions for customer proposals, including system architecture, equipment sizing, and technical scope., • Develop electrical system designs, including single-line diagrams, layouts, and medium/low voltage system configurations., • Perform and support power system evaluations (load, capacity, reliability) to inform design decisions., • Serve as the primary technical interface with customers, leading discussions, whiteboarding sessions, and presentations., • Collaborate cross-functionally with engineering, EPC, R&D, and product teams to develop optimized, executable solutions., • Prepare and communicate technical content for proposals, including drawings, narratives, and supporting documentation., • Evaluate design tradeoffs across cost, performance, constructability, and schedule., • Participate in site visits and customer engagements to validate design assumptions., • Bachelor’s degree in Electrical Engineering, Electrical/Electronics Engineering Technology, or equivalent., • Strong foundation in low and medium voltage power systems, including generation., • Experience developing and interpreting electrical diagrams, including single-line diagrams and system layouts., • Ability to think at the system level and translate requirements into practical engineering solutions., • Strong problem-solving and analytical skills with attention to detail., • Effective communication skills, with the ability to clearly explain technical concepts to both technical and non-technical audiences., • Ability to operate in a fast-paced, cross-functional environment and manage competing priorities., • 2–5+ years (preferred) of experience in power systems, distributed generation, microgrids, or related fields., • Experience with power system studies such as load flow, short circuit, or reliability analysis., • Familiarity with power system modeling tools (e.g., ETAP, PSCAD, PSS/E, MATLAB/Simulink)., • Experience with electrical equipment design and layout, including switchgear and interconnection systems., • Understanding of protection schemes, relaying concepts, and system coordination., • Proficiency with AutoCAD or similar design tools., • Experience supporting technical proposals, bids, or customer-facing engineering efforts., • Familiarity with RFP processes and working within defined commercial and technical constraints., • Direct customer engagement and ownership of technical solutions – not just back-end design., • Work on mission-critical infrastructure with real-world impact on customers and the grid., • Exposure to the full lifecycle: concept – proposal – execution., • Highly collaborative environment with access to cross-functional technical teams., • Opportunity to develop both deep technical expertise and strong commercial/strategic engineering skills., • Exposure to large-scale, real-world energy infrastructure projects., • Career growth across engineering, commercial, and technical leadership paths. · Medical, Dental, Vision, and Prescription Drug Insurance · Company-Paid Life Insurance · Disability Insurance · Paid Family Leave · Flexible Spending Account (FSA) · Health Savings Account (HSA) · Wellness Programs and Incentives · 401(k) Retirement Plan & Company Match · Paid Time Off – Sick & Vacation Time · Paid Holidays · Hybrid Work Schedule (prefer Houston-based, ~3 days in office) · Cool Open-Office Concept Do you have what it takes to join the Enchanted Rock team? Send us your resume today. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job Description Hunton Trane, a division of the Hunton Group in Houston, TX, is seeking to hire an Industrial Structural Engineer. This role is responsible for engineering structural systems that support industrial heating, cooling, and utility infrastructure within prospective projects. The Industrial Structural Engineer provides ongoing technical consultation to support sales and business development efforts and works closely with the project management team to execute projects for customers. This individual will also be responsible for developing comprehensive, value-driven structural solutions for industrial facilities, including foundations, equipment support, platforms, and building structures, with an emphasis on constructability, safety, and compliance with applicable codes and standards. Come work for an industry leader that has been recognized both locally and nationally as one of the Top Places to Work! Responsibilities: • Develop, analyze, and review structural designs for industrial facilities, including shallow and deep foundations, equipment supports, pipe racks, platforms, retaining walls, and building structures., • Perform structural analysis and design of steel and reinforced concrete systems using industry-standard software such as STAAD.Pro, RISA, SAP2000, or equivalent tools., • Prepare and review construction drawings, design calculations, technical specifications, and material take-offs in accordance with project requirements., • Ensure all structural designs comply with applicable codes and standards, including IBC, ASCE 7, AISC, ACI, AWS, OSHA, and client-specific criteria., • Coordinate closely with multidisciplinary teams (process, mechanical, electrical, instrumentation, and controls) throughout all phases of the project lifecycle., • Review vendor drawings and submittals, resolve technical issues, and ensure alignment with project specifications and constructability requirements., • Participate in hazard analyses, design reviews, and client meetings as a technical contributor., • Support project execution through schedule coordination, cost tracking, and progress reporting., • Bachelor's degree in Structural Engineering or Civil Engineering with a structural emphasis., • 5-10+ years of industrial structural engineering experience, preferably within an EPC or design-build environment., • Demonstrated experience delivering industrial or heavy commercial projects such as data centers, petrochemical facilities, power generation plants, manufacturing facilities, or water/wastewater infrastructure., • Strong understanding of steel and concrete design principles, structural systems, and industrial construction practices., • Proficiency with structural analysis and design software (STAAD.Pro, RISA, RAM, SAP2000, or similar) and CAD tools such as AutoCAD and Revit., • Engineer-in-Training (EIT) or Professional Engineer (PE) license preferred, or willingness to pursue licensure., • Excellent communication, collaboration, and problem-solving skills., • Ability to travel to project sites and vendor facilities as needed (estimated less than 5%). Job Posted by ApplicantPro

Job Description Join our team! Our mission is BUILDING COMMUNITIES. IMPROVING LIVES. With a history spanning over 110 years, HR Green has consistently delivered on this mission, establishing ourselves as a trusted partner for our colleagues, clients, and communities alike. Each day, we work to find solutions that inspire our employees and fit our clients' needs to build trust to exceed their expectations. As a leading player in the industry, we're proud to be ranked No. 168 on Engineering News Record's Top 500 Design Firms list in 2025. Our unwavering dedication to cultivating an exceptional workplace environment has earned us the distinguished honor of being recognized as a Best Place to Work. Summary We are hiring a Lead Engineer - Electrical on our Water/Wastewater Team! This is a great opportunity for a PE who is interested in working with a dynamic team on a wide range of projects. The Lead Engineer – Electrical role supports projects within the Water-Wastewater team, ensuring technical success and project delivery. Projects range from municipal water treatment, wastewater treatment, pumping, conveyance, and private industry work with food and beverage manufacturing industries. This role will allow you to make significant contributions to the projects by designing the electrical power, lighting, and special systems to support the facilities design. You will be working side-by-side with a team of knowledgeable engineers and professionals in an environment that fosters collaboration and career development. If you are looking to work with a company that will provide mentorship, technical guidance and comradery, client facing opportunities, and involvement in professional organizations, then read on to discover more about this exciting opportunity! Essential Duties and Responsibilities • As an individual contributor, uses professional judgment to direct and independently complete assigned engineering designs., • Actively assists the Project Manager, assigns tasks and schedules to project support team members, answers questions, and monitors progress., • Completes major design tasks with limited supervision that meet the needs of internal and external customers, primarily design of power, lighting, grounding, standby generation, fire alarm, and other systems for Water/Wastewater facility projects., • Checks the accuracy (formal and informal QA/QC) of assigned tasks completed by other engineering and technical staff., • Makes major design decisions for power, lighting, grounding, standby generation, fire alarm, and other systems that meet the needs of external customers while coordinating the impact of such decisions on related project efforts., • Pro-actively identifies technical, schedule or financial issues and seeks resolution from the Project Manager and/or the client, as appropriate to the situation., • Assists the Client in bidding or contractor selection if authorized by the Project Manager., • Responds to contractor questions and issues and prepares and issues project addenda as needed., • Participates in the creation of engineering services proposals, including the calculation/estimation of time schedules and costs of the proposed work when requested by the Project Manager., • Signs and seals engineering documents as an authorized representative of the company., • Previous water/wastewater experience strongly preferred., • Must have a bachelor’s or master’s degree in engineering from an accredited four-year or graduate engineering university in a relevant discipline, • Professionally registered (P.E.) in one or more states in which HR. Green, Inc. conducts business (or have the ability to obtain such registration within six months of employment)., • Possess ten or more years of design/engineering experience and a demonstrated ability to act as an authorized agent of the company to sign engineering documents., • Possess strong technical verbal and technical writing skills and be able to read technical literature and engineering plans., • Possess strong analytical and problem-solving skills and be able to apply professional knowledge to the solution of both routine and non-routine tasks and engineering activities., • Proficient knowledge of computer use and office software (Word, Excel, Bluebeam, etc.)., • Working knowledge in office automation, CADD, and engineering automation tools. AutoCAD, and Revit preferred., • Must possess strong analytical and problem-solving skills and be able to apply professional knowledge to the solution of both routine and non-routine tasks and engineering activities. Not only does HR Green provide you with a place to grow, thrive, and enjoy your work, but we are also dedicated to delivering a comprehensive and multi-faceted benefits package. Visit our website for detailed total rewards information. Compensation Range $101,200.00 - $161,600.00 The expected compensation range for this position is displayed in accordance with the Minnesota Omnibus Labor and Industry Policy Bill Article 7 Section 2 and the Illinois Salary Transparency amendment to the Equal Pay Act of 2003. The final agreed-upon compensation is based on a number of factors, including but not limited to: individual education, qualifications, skills, prior work experience, competencies, and geographic work location. The total annual compensation package may consist of a base salary and eligibility to participate, after a qualifying period, in our performance and discretionary incentive bonus program(s). HR Green is proud to be an affirmative action/ equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, or other classification protected by applicable federal, state or local law.

Job Description Basic Function Dynamic leader in sustainable resource management, providing clean water, renewable energy, and water treatment as a service Project Engineer with a strong project execution background to join the company’s team. The ideal candidate will be a pro-active problem solver capable of working with the Project Manager to engineer wastewater-to-energy plants to customers on time and on budget. Role includes providing site engineering, construction, installation, and commissioning support to the project execution team-members. Candidate will be able to perform a variety of project engineering and field engineering tasks, including support of site engineering and system installation, coordination with equipment suppliers, sub-contractors, customers. To be considered, you must have experience in water, wastewater, food and beverage manufacturing, chemical process design, or similar fields, and familiarity with the basics of wastewater treatment equipment. Strong communication, problem solving, self-organizing skills are a must. The ideal candidate will have a passion for sustainability and the environment, will thrive in a fast-paced entrepreneurial setting, be self-motivated, and have an interest in cutting edge technology. Think big, think differently, be ambitious and consider joining a company that values creativity, collaboration, teamwork, and sustainability. Typical Duties • Support Project Manager in coordination with internal resources, external subcontractors, and consultants to ensure that projects are delivered on time and on budget., • Understand Project budgeting, updates and reporting, • Plan, sequence, and maintain project schedules with support of engineering and subcontractors., • Responsible for selection of pumps, process equipment, valves, and instruments, • Coordination with suppliers and vendors for equipment selection, quality requirements and delivery schedules, • Manage project documentation, including determining which documentation is required for a given project, ensuring that proper revisions are made throughout the delivery process, and establishing standards that are in-line with industry., • Coordinate requirements of governing authorities for permits, inspections, and final approval of the project., • Bachelor’s Degree in chemical, environmental, mechanical, marine, facilities engineering or similar., • 3+ years with total project responsibility for complex equipment systems in excess of $1 million dollars., • 3+ years’ experience working with vendors, customers and trades including electrical, piping and construction personnel., • Superb ability to interact with customers, including strong communication and presentation skills, affable, and demonstrated maturity and professionalism., • Demonstrated experience in process engineering problem solving and system integration, preferably in the food and beverage processing or wastewater industries., • Ability to work in a cross-functional team environment., • Stellar written and verbal communication skills., • Must be able to exhibit strong leadership ability and have a professional demeanor., • Proactive, problem-solving personality required. Skills/Desired Qualities • Self-motivated, decisive, with the ability to adapt to change and competing demands, • Strong leadership, diplomatic and motivational skills including the ability to lead up, across and down multiple business functions, • Flexible with proven ability to conform to shifting priorities, demands and timelines through analytical and problem-solving capabilities Company Description Cambrian is a dynamic leader in sustainable resource management, providing clean water, renewable energy, and water treatment as a service. Cambrian's resource management solutions deliver real, tangible results to people, businesses, the planet, and some of the top names in food and beverage processing including: LVMH-Domaine Chandon, AB InBev, Keurig Dr Pepper, Russian River, Treehouse Brewing Company. Cambrian’s award-winning EcoVolt® and BioViper® product suites offer cost-effective and sustainable options for onsite wastewater treatment, water reuse, and clean energy generation. Through its water-energy purchase agreement (WEPA®), a leading-edge financing platform, Cambrian offers wastewater treatment and resource recovery as a service with no upfront costs. Cambrian Innovation’s robust research and development group is also commercializing a broader portfolio of environmental productions to help industrial clients efficiently manage their resources. Equal Employment Opportunity Statement Cambrian Innovation Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. EEO is the Law Poster: Applicants must be eligible to work in US without restrictions for any employer at any time. As a condition of employment, all selected candidates will undergo Cambrian Innovations’ standard pre-employment checks, including but not limited to a background check regarding criminal history, driver’s license, education and employment. Cambrian Innovation does not accept unsolicited candidate referrals or resumes/CVs from third- party vendors, including recruitment agencies. Cambrian Innovation will not be responsible or liable for any fees or costs associated with such unsolicited submissions.

Job Description Who We Are Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 70+ locations and growing! Atwell, LLC is a proud recipient of the following 2025 awards: • Ten consecutive years in a row as a "Best Place to Work" by Zweig Group (#11), • Recognized as #70 in the ENR Top 500 Design Firms, ranked in every region, • Recognized in Crain's "Fast 50" as one of the fastest-growing companies (#14), • Recognized as the 2025 ENR Design Firm of the year for the Southeastern US Position Snapshot: Civil/Structural Engineer – Oil & Gas Atwell is seeking a licensed Civil/Structural Engineer (PE) with experience supporting structural design and engineering for the Oil and Gas industry. Our current project portfolio includes oil and natural gas, CO₂, hydrogen, and renewable natural gas (RNG) pipelines, terminals, compressor stations, and processing facilities. In this role, you will be responsible for leading and executing civil and structural engineering efforts, ensuring alignment with project scope, schedule, budgets, client expectations, and applicable codes and standards. This position involves developing engineering documentation from concept through construction, overseeing structural analyses, mentoring junior team members, and coordinating across disciplines to support successful project execution. You will play a critical role in the design of reinforced concrete foundations, structural steel platforms and supports, equipment skids, and pipeline structural systems. Roles and Responsibilities: • Lead the civil and structural engineering design for oil and gas infrastructure projects, including pipelines, pump stations, compressor stations, terminals, and process facilities, • Develop construction documents, including structural plans, general arrangements, framing plans, and connection details for steel and concrete structures, • Conduct structural analysis under various loading conditions including wind, seismic, blast, and equipment loads in accordance with applicable codes (IBC, ASCE, AISC, ACI, API, etc.), • Review and approve engineering calculations, drawings, and reports prepared by internal teams and subcontractors, • Collaborate with multidiscipline teams including mechanical, piping, and electrical to coordinate structural requirements across project phases, • Perform field visits to verify as-built conditions, gather site data, and provide construction support as needed, • Provide mentorship to junior engineers and support team development through technical leadership, • Monitor project schedules, budgets, and resource allocations to ensure deliverables are met on time and within scope, • Bachelor's degree in Civil or Structural Engineering from an ABET-accredited institution (Master's a plus), • Professional Engineer (PE) license required, • 7+ years of experience in civil/structural engineering for oil and gas facilities or similar industrial infrastructure, • Proficient in structural analysis software such as STAAD.Pro, RISA, SAP2000, or similar, • Working knowledge of CAD software tools including AutoCAD, CADWorx, and Civil 3D, • Familiarity with Autodesk Inventor, Navisworks, or Tekla Structures is a plus, • Strong knowledge of applicable design codes: AISC, ACI, ASCE, API, IBC Disclaimer While AI tools may support your application process, this role is built on human talent. Your judgment, experience, and character matter most, so we encourage you to showcase what makes you uniquely you. Atwell does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any Atwell employee. Resumes from approved vendors must be specifically requested by Atwell and approved by the Atwell Talent Acquisition Team. #LI-TK1 Pay Range $100,000—$145,000 USD Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals, • Annual Wellness Reimbursement for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description Firmware Lead - Hardware Acceleration - Lunar Terrain Vehicle (NASA LTVS Award ContingentHouston, Texas, United States About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. We believe our mission is to further research, communications, and exploration beyond low lunar orbit. With multiple NASA lunar missions in the making and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers and the nation in paving the way to return humans to the surface of the moon. Our world-class team includes experts in all spacecraft subsystems design, development, and test, on-orbit operations, and safety. We are seeking a Firmware Engineer Lead specializing in Versal Hardware Acceleration to support Intuitive Machines’ Lunar Terrain Vehicle (LTV) program. The LTV is NASA’s next-generation autonomous lunar rover, and this role will focus on developing / leading RTL firmware and software modules for Xilinx Versal ACAP hardware, enabling hardware-accelerated autonomy, vision, and navigation functions in real time. The successful candidate will work at the intersection of embedded systems, FPGA development, and autonomy software, creating high-performance compute pipelines to process sensor data, support decision-making, and ensure safe rover operations in the lunar environment. *Employment in this role is contingent upon NASA selecting Intuitive Machines as a winner of LTVS program, scheduled for announcement later in 2025. Responsibilities • Understand self-driving algorithm designs as proposed by the software team, able to dissect, critique, and bend designs to fit hardware capabilities, • Design, implement, and test hardware acceleration algorithms, • Understand hardware processing capabilities across multiple modalities (CPU, NPU/AIE, GPU, FPGA, ASIC), quantify relative performance, and recommend ways to optimally distribute algorithms across available flight hardware, • Analyze hardware performance and produce trade studies for hardware selections and software implementation, • Rigorously verify the design and performance of hardware acceleration algorithms to ensure compliance with applicable NASA CBCS safety requirements, • Manage a small team working on all aspects of the above, decomposing a large complex problem into individual problems, assigning them out, and monitoring progress towards completion Qualifications • Bachelor’s degree in Computer Engineering, Electrical Engineering, Computer Science, Robotics, or related field (Master’s preferred), • Experience with hardware-accelerated algorithm design in aerospace, defense, automotive, robotic, AI, quantitative finance or other contexts, • Experience certifying hardware-accelerated algorithm design for safety-critical and mission-critical applications, • Familiar with high-reliability software standards (NPR 7150.2D and NASA-STD-8739.8B and NASA CBCS requirements (e.g. SSP 50038)), • Experience with the AMD Versal architecture strongly desired, • Experience with Nvidia CUDA architecture strongly desired Tool/Language Experience: • Jira, Jama, Git, • C, C++, • Verilog, VHDL (including RTL design), • Vivado Design Suite, Vitis, PetaLinux/Yocto, • 8+ years of experience in this domain, • Experience with ROS/ROS2 and integration of hardware acceleration into robotics frameworks., • Background in computer vision, AI/ML inference (CNNs, SLAM, path planning)., • Familiarity with radiation-tolerant FPGA design practices for space applications., • Experience in NASA, defense, or spaceflight programs., • Knowledge of DO-254, DO-178, or equivalent safety-critical development standards. EEOC Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description • Please note that this is for an upcoming position. We are, however, accepting applications for this anticipated need. If you are interested in joining The Building People, we encourage you to APPLY TODAY! The Building People, LLC, has a position open for a full-time Senior Building Controls Technician to provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties • Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents, • Ability to program projects with various levels of complexity, • Capable of performing network troubleshooting, database troubleshooting and repair programming, • Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations, • Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems, • Maintains accurate and thorough project documentation and redlines, • Provides owner training as required by the project, • Executes system commissioning and functional testing, • Assist in installation of control hardware, • Startup and commission new hardware installations, • Provide project management assistance on projects as required, interfacing directly to customers, • Supervise sub-contractors and suppliers as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 3 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times.

Job Description Mitsubishi Electric Trane HVAC US LLC is looking for an BU Controls Manager II in Houston, Texas. POSITION SUMMARY: This role is responsible for supporting the sale of City Multi equipment by supporting regional sales team, distribution, and customers with the application and sales of METUS Controls within the METUS Business Unit ESSENTIAL FUNCTIONS The essential functions of the position include, but are not limited to the following: * Support METUS Commercial/Residential Equipment Sales teams in qualifying opportunities & presenting solutions to customers requiring advanced or standard controls solutions. * Build relationships within the Architect, Engineer, & Contractor community to promote METUS offerings, define project scope, package solutions and other METUS offerings to create competitive advantages, and review final proposal. * Lead development of market strategy for controls and responsible for implementing strategy with other Business Unit team members. * Build close working relationships with all distribution channels to grow market awareness of all METUS offerings. Assist distribution in the application and sales of all offerings through pre and post-sales support. * Responsible for project proposals on an as-needed basis for advanced controls and support. Collaborate with the Controls Applications Team to develop project scope of work, estimates and proposals. * Develop and maintain standards & best practices for applications design and support of advanced controls with Business Unit Team and Controls Applications Team * Support Controls Applications team with proposals and project turnover on an as needed basis. * Lead the creation and implementation of applications-based training for field sales, HVAC specifiers and design professionals, building owners and developers, and distributors. Training includes knowledge transfer of existing product/applications and introduction of new products/applications. * Create and review technical documentation and collateral. Technical documentation includes, but is not limited to, application notes, I&O manuals, schematic drawings, submittals, engineering data, and white papers. * Provide Tier 2 level customer support for distributors, owner, design professionals, and contractors for application and technical support. * Willing to travel up to 50% within territory for customer meetings and to various Company meetings * Other Duties as assigned. QUALIFICATIONS: * 10 years of experience in technical HVAC controls, building management, and/or integration or related field. Experience as an HVAC application sales engineer is preferred. * B.S. degree in electrical/computer/mechanical engineering, computer science or technical in HVAC Control Systems or Computer Networking, or equivalent is preferred. * Technical experience with DDC and low voltage controls, BMS/BAS, BACnet, and networking. * Excellent computer skills with Microsoft Office and similar standard business software applications * Strong leadership, communication, presentation, training, and technical writing skills * Analytical approach to problem solving; self-motivated. * Experience with a major BAS platform is preferred. * Team player demonstrating METUS core values including a desire to win together, deliver excellence, drive sustainability, focus on execution and learn continuously The base pay range for this position at commencement of employment is expected to be between $128,000 and $176,000 per year however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements, including target bonus plans and discretionary awards. Subject to the terms and conditions of the applicable plans then in effect, eligible employees may enroll in a 401(k) plan, as well as participate in Company-sponsored medical, dental, vision, and basic life insurance plans for the employee and the employee’s eligible dependents. Employees will also receive 120 hours of vacation per year, 56 hours of paid sick leave annually, and 13 paid holidays throughout the calendar year, depending on hire date. Employees may also take up to 12 weeks of paid or unpaid [parental/disability/emergency/etc.] leave, if eligible. ABOUT MITSUBISHI ELECTRIC TRANE HVAC US Formed in 2018, Mitsubishi Electric Trane HVAC US (METUS) is a leading provider of ductless and VRF systems in the United States and Latin America. A 50 percent – 50 percent joint venture between Ingersoll Rand plc and Mitsubishi Electric US, Inc., the company provides innovative products, systems and solutions capable of cooling and heating any application from a home to a large commercial building. METUS is a leading marketer of Zoned Comfort Solutions® and Variable Refrigerant Flow (VRF) air-conditioning and heating technology. Systems sold by the joint venture include a wide variety of technologically advanced products designed to deliver superior efficiency, comfort and control. The family of brands supported by METUS includes: Mitsubishi Electric Cooling & Heating, Trane® / Mitsubishi Electric and American Standard® Heating & Air Conditioning Mitsubishi Electric. More information is available at . We offer an excellent compensation and benefits package including 401(K). In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. We are an equal employment opportunity employer. All employment decisions are made without regard to race, color, religion, sex, pregnancy, breastfeeding or related medical condition, national origin, ancestry, citizenship, age, marital status, sexual orientation, gender identity, gender expression, domestic partnership, physical disability, mental disability, medical condition, genetic characteristic or information, military or veteran status or other legally protected status (except when one of these criteria is a legally permissible bona fide occupational qualification). The Company will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the Company, or (c) consistent with the Company’s legal duty to furnish information. To view the EEO is The Law Poster and the supplement, please click here or visit . Applicants with a disability who need assistance with the application process may contact Human Resources by email at or by calling 714.229.3813.

Job DescriptionSalary: The Industrial AI Engineer & Analyst will serve as the organizations inhouse specialist for industrial artificial intelligence - functioning as an SME in the same way a process, mechanical, or electrical engineer would serve as a discipline expert. This role is being established to fill a critical capability gap: the ability to rigorously evaluate, validate, and interpret AI solutions offered by external vendors in the industrial domain. The individual will not be expected to design or code AI algorithms. Instead, they will apply engineering judgment, industrial domain knowledge, and working familiarity with AI/ML concepts to determine whether vendor AI tools are technically sound, operationally realistic, and aligned with engineering principles. This role is ideal for someone with an engineering background and real-world industrial experience who has also developed competency in data science, analytics, or AI - either through formal education or professional training. Key Responsibilities: AI Application Evaluation & Vendor Validation • Act as the internal SME for industrial AI, evaluating vendor AI offerings across process optimization, rotating equipment diagnostics, and other industrial applications., • Validate vendor claims, model outputs, and optimization recommendations using engineering principles and operational context., • Assess whether AI-driven insights (e.g., anomaly detection, predictive maintenance, optimization scoring) are technically credible and actionable., • Support the transition from time-based maintenance to condition-based and predictive maintenance strategies., • Analyze sensor and equipment data (vibration, temperature, pressure, chemical signatures, etc.) to confirm whether AI-generated diagnostics align with known system behavior., • Understand the data types, quality requirements, and operational conditions necessary for effective industrial AI., • Collaborate with vendors and internal data teams to ensure data sufficiency and relevance., • Partner with process, mechanical, reliability, and operations engineers to ensure AI tools support real-world industrial needs., • Translate AI outputs into engineering language and operational decision-making., • Produce clear technical assessments of AI tools, including validation results, limitations, and recommendations., • Develop internal frameworks for evaluating future AI technologies., • Bachelors degree in Engineering (Mechanical, Chemical, Electrical, Industrial, or related)., • Broad industrial experience in plant operations, field engineering, reliability, or similar environments., • Working knowledge of AI/ML concepts, data analysis, and predictive modeling (formal training or a masters in data science is a plus)., • Strong ability to evaluate technical claims and interpret complex data-driven outputs., • Experience with condition-based or predictive maintenance programs., • Familiarity with industrial sensors, control systems, and equipment diagnostics., • Exposure to data science tools or workflows (Python, SQL, dashboards) at a conceptual or applied level., • Primary expectation: Full-time, on-site., • No formal hybrid or remote program is currently offered., • May be structured as a part time initially, if requested by the candidate. Ideal Candidate Profile The strongest candidates will: • Have an engineering degree and real-world industrial/field experience., • Possess additional training or education in data science, analytics, or AI., • Be comfortable acting as an internal SME for industrial AIsimilar to a discipline engineer., • Have the ability to challenge vendor claims, validate AI outputs, and ensure engineering rigor., • Thrive at the intersection of engineering intuition and data-driven insights. About Novetus Engineering LLCNovetus is unsurpassed in our commitment to achieving our objectives as efficiently as possible. From a piping modification or pump upgrade project to helping to manage a multi-billion-dollar international development, Novetus will field the right team and the right systems to get the work done quickly and fit for the purpose. Novetus combines engineering workflow automation expertise with an experienced team of engineers and project managers to execute projects with exceptional efficiency. An engineering company focused on the oil, gas, and petrochemical industry, Novetus is based in Houston, Texas and is privately held.

Job Description About the Position Conduit Power is committed to strengthening our nation’s power generation system by delivering reliable, dispatchable energy solutions that reduce carbon footprints and accelerate the transition to clean, renewable resources. We are seeking a licensed Project Engineer (PE) in Electrical Engineering who brings strong technical expertise and leadership to the design, development, and execution of power generation projects. This role will lead engineering activities from concept through commissioning, ensuring that all work meets the highest standards of safety, performance, and compliance. If you Are: • Deeply interested in supporting the transition to clean, renewable energy, • A driven, detail-oriented professional seeking a meaningful career growth opportunity, • Proud of delivering high-quality engineering work, • Flexible and excited to work in a small, collaborative, high-impact team, • A continuous learner who thrives on expanding technical knowledge, • A critial thinker who transforms technical information into clear, compelling communication, • A direct, thoughtful communicator who values strong, respectful working relationships You Will:, • Lead the full engineering lifecycle of power generation projects—from early scoping through detailed electrical design, procurement support, construction oversight, and commissioning, • Serve as the lead technical and engineering authority, providing PE-level review, stamping (as applicable), and design approval, • Review, develop, and integrate engineering drawings, specifications, and calculations across electrical, mechanical, and controls/SCADA disciplines for systems including natural gas‑fired generation and battery energy storage (BESS), • Conduct formal electrical design reviews at key milestones (30%, 60%, 90%, IFC) and drive timely resolution of technical comments, • Collaborate with internal teams, external engineers, OEMs, and construction partners to ensure adherence to design requirements, safety standards, performance expectations, and equipment specifications, • Lead technical evaluations of bids and vendor proposals, including switchgear, transformers, protection systems, natural gas reciprocating engines, and instrumentation, • Develop and refine electrical scopes of work, RFQs, design specifications, and engineering procedures, • Oversee QA/QC activities including factory acceptance testing (FAT), site acceptance testing (SAT), and field troubleshooting, • Identify opportunities to enhance engineering workflows, documentation quality, and cross-team collaboration, • Evaluate emerging electrical technologies across BESS, natural gas generation, renewables, and distributed energy systems What You Bring to the Team: • Bachelor’s degree in electrical engineering or related field., • Active Professional Engineer (PE) license in Electrical Engineering (required)., • 4+ years of engineering experience in power generation, BESS, transmission & distribution, renewables, or related energy sectors, • Deep knowledge of low‑ and medium‑voltage electrical systems, distribution design, and power equipment, • Proficiency in power generation concepts, load flow, fault analysis, electrical protection, communications protocols, and equipment sizing, • Strong familiarity with applicable codes and standards (e.g., NEC, NESC, IEEE, NFPA), • Excellent analytical and problem‑solving skills, • Strong written and verbal communication, with the ability to simplify complex technical topics for diverse audiences, • Ability to manage competing priorities across multiple projects in a fast‑paced environment, • Willingness to travel 5–10% (primarily within the U.S.), • Legally authorized to work in the U.S., with a valid driver’s license and reliable transportation What Conduit Brings to You: • Opportunity to play a significant role in transforming the energy industry, • Growth, development, learning, and advancement opportunities, • An extremely flexible environment where your voice, thoughts, and ideas are valued and heard, • Excellent benefits (company-paid and voluntary): Health / Dental / Vision / Life / AD&D About Conduit Power Conduit Power is an Independent Power Producer (IPP) and services platform dedicated to delivering total power solutions for commercial and industrial customers. We specialize in designing, building, owning, and operating natural gas and battery storage power generation assets. Our mission is to help customers accelerate in-service dates, reduce energy costs, enhance operational performance, lower carbon emissions, and unlock greater value from natural gas. By combining on-site generation with a robust services platform, Conduit Power enables businesses to take control of their energy future with reliable, scalable, and cost-effective solutions. Learn more at .

Job DescriptionSubstation Project Engineer Location: TX, and other States Work Schedule: Hybrid (4 days per week in-office) Job Summary: FindTalent is seeking an experienced and motivated Substation Project Engineer on behalf of our client. In this dynamic role, you will collaborate with lead engineers and account managers to deliver high-quality solutions for power delivery services. You will be responsible for the engineering design, project management, and quality assurance of substation projects. If you thrive in a fast-paced, diverse environment and have a passion for innovation and leadership, we want to hear from you. Key Responsibilities: * Lead and/or perform substation physical electrical design, including general arrangements, electrical plans, grounding, raceway layouts, shielding, and lighting for high voltage (HV) and extra-high voltage (EHV) projects. * Design protection and control systems, including relay one-lines, AC/DC schematics, metering, SCADA, communications, automation, and security systems. * Conduct and oversee engineering calculations and studies, including bus spans, conduit fill, AC/DC system loading, and grounding. * Apply industry standards, safety codes, and regulatory requirements to ensure compliance. * Develop equipment specifications, material lists, construction details, and testing and commissioning plans. * Perform quality control (QC) reviews and lead QC meetings for engineering deliverables. * Provide technical leadership, mentorship, and support to project teams. * Coordinate with project managers to deliver projects on time and within budget. * Act as a client point of contact, addressing project-related issues and ensuring satisfaction. * Conduct site visits and evaluations, providing recommendations for upgrades or replacements. * Prepare proposals, technical documentation, and comprehensive scopes of work. * Create and manage project schedules using tools such as MS Project or Primavera. * Deliver technical training and professional mentorship to junior staff. Qualifications: * Bachelor’s degree in Electrical Engineering or a related field. * 4+ years of relevant experience in substation engineering. * Prior experience as a lead engineer, including QC reviews and mentoring. * Strong understanding of power systems, substation design principles, and utility grid operations. * Familiarity with industry standards (NEC, NESC, NEMA, IEEE/ANSI). * Proficiency in engineering analysis and design tools. * Strong organizational, communication, and teamwork skills. * Ability to travel up to 15%. Preferred Skills: * Registered Professional Engineer (PE) certification. * Experience with engineering software such as SKM, ASPEN, ETAP, or CDEGS. * Active membership in industry organizations (e.g., IEEE, PES). * Construction support experience. What We Offer: * Competitive compensation and benefits. * Professional development and leadership opportunities. * A collaborative and growth-focused work environment. If you are ready to advance your career as a Substation Project Engineer, apply today through FindTalent and become a key contributor to delivering innovative solutions in power delivery engineering.

Job Description Company Overview Plus Power is an energy storage market leader, with a market-leading 10+ GW portfolio across more than 25 states that will transform North American electric grids into cleaner and more versatile critical infrastructure. Standalone energy storage is rapidly transforming the North American energy markets, because it is cheaper than new natural gas plants, faster to build than fossil peakers or transmission, and able to perform diverse energy services. Plus Power partners with electricity system operators, utilities, and investors to originate, develop, finance, own and operate standalone energy storage projects that provide critical services to the wholesale electric market. Plus Power's team applies an intentional mindset to energy storage development by using a data-driven approach to development and operations. At Plus Power, we are focused on solving hard climate problems, profitably. We are growing fast, and value candidates who, like us, share a focus on setting high expectations, owning and learning from mistakes in the spirit of radical transparency, and are committed to internal partnering as a key element of our ideas meritocracy. Our team praises Plus Power's culture and excels through our game-changing mission and supportive ecosystem. About Plus Power: Plus Power recruits outstanding energy industry professionals who are driven to develop, build and operate assets safely and reliably to decarbonize the power markets while growing their careers. Our team looks for data-driven and fact-based mindsets, engaging and collaborative behaviors, and personal growth-focused professionals. We are looking for a Senior Controls System Engineer. This qualified individual would work under the guidance of the Manager - Operational Technology to design, implementation, and operations of cutting-edge, utility scale energy storage systems including supporting control systems at various plant locations. This position requires experience, advanced knowledge and expertise with next generation plant control and automation systems, including battery energy storage systems, cyber security network standards, ISO market interfacing, and plant performance management. Key Responsibilities • Responsible for design, implementation, and operations of control system infrastructure, • Responsible for PPC, HMI, and RTU programming including technical documentation, • Support day-to-day plant automation tasks to ensure network reliability, availability, and serviceability within minimal interruption, • Provide technical support, respond to complex work orders and tickets from the users, and analyze and solve complex reported operation technology/control system problems, • Oversee and participate in network technology upgrades or expansion projects, including installation of hardware, software and integration testing, • Participate in on-field construction and plant commissioning activities, • Serve as subject matter expert (SME) for control and instrumentation related systems, • Work cross-functionally with internal groups and external EPC vendors during project bidding and execution phases as needed Skills & Qualifications • Minimum BA/BS in related field; electrical engineering degree preferred, • Minimum of 6+ years related industry, experience with renewable energy industry highly preferred, • Knowledge and experience with battery energy storage systems use cases including primary frequency response (PFR), fast frequency response (FFR), & black start is highly preferred, • Demonstrated expertise in designing and maintaining plant control systems using industry standard SCADA and PLC platforms, • Understanding of data logging requirements and various historian platforms, • Experience with Inductive Automation Ignition, • Experience with Schneider Electric Modicon PLCs, SEL RTACs, and Novatech Orions, • Knowledge of industrial communication protocols DNP3.0, Modbus, OPC-UA, and MQTT, • Programming language experience Python, IEC 61131-3, C, C++, C#, • Proficient with writing technical specifications for process or manufacturing equipment, • Strong understanding of cyber-security best practices including IT/OT standards, • Knowledge of NERC/CIP/NIST procedures, • Ability to explain complex technical analysis in a simplified matter to the internal management team and/or external parties, • Demonstrated ability to work well in a cross-functional environment with both technical and non-technical team members, • Ability to effectively use Microsoft Office products – Word, Excel, Power Point, • Excellent communication and interpersonal skills Compensation and Benefits Highly competitive total compensation from one of North America's leading energy storage developers, owners and operators. Flexible, work from home or hybrid work from Plus Power's offices in San Francisco, Houston, Chicago, Seattle, Birmingham, New York, and Palm Beach. The expected salary range* for this position begins at $140,000. We may ultimately pay more or less than the posted range based on several factors including, but not limited to relevant experience, skills, qualifications, geographic labor market, and other factors consistent with applicable law. This position is also eligible to participate in our annual bonus program. Plus Power offers a comprehensive benefits program, unlimited vacation, flexible remote work, educational assistance, parental leave, and a highly engaging company culture with opportunities for in-person connection and learning and growth. The deadline* for applying to this role is 6/1/2026. Plus Power is committed to a diverse and inclusive workplace where people of all backgrounds can thrive. Plus Power is an equal opportunity employer and does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status. *This information is provided in accordance with applicable law.

Job Description Role: Senior I&C Design Engineer / Project Manage(Full-Time) Location: Dallas, TX or Houston, TX Salary: (DOE) Position Overview Seeking a Senior Instrumentation & Controls (I&C) Design Engineer / Project Manager to lead the design and delivery of control systems for water and wastewater treatment facilities. This role is responsible for both technical design leadership and project execution, managing projects from initial assessment through design, construction, and closeout. The ideal candidate has strong experience in SCADA and industrial control systems, along with the ability to manage scope, schedule, budget, and client relationships. Key Responsibilities · Lead I&C and SCADA design efforts for water and wastewater projects · Manage projects through the full lifecycle, including: o Site assessments and preliminary evaluations o Design (PER, 30%, 60%, 90%, IFC deliverables) o Bidding and construction support · Serve as primary point of contact for clients, ensuring clear communication and alignment · Manage scope, schedule, and budget for assigned projects · Coordinate with internal teams (electrical, civil, mechanical) to ensure integrated design · Review existing documentation, including P&IDs, system architecture, and electrical drawings · Develop and oversee production of: o Control narratives and system architecture diagrams o P&IDs, loop diagrams, and installation details o SCADA system design (PLC, HMI, networking) · Prepare and review technical memoranda and assessment reports · Oversee development of project specifications for instrumentation, SCADA systems, and communications networks · Lead QA/QC reviews and ensure high-quality deliverables · Review and respond to submittals, RFIs, and shop drawings during construction · Support OPCC development and quantity take-offs · Coordinate with owners, city reviewers, and prime consultants · Participate in and lead client meetings and presentations · Mentor and guide junior engineers and designers Required Qualifications · 8+ years of experience in I&C or industrial control system design · Experience leading projects within a consulting engineering environment · Professional Engineer (PE) license (Texas or ability to obtain) · Strong experience with: o SCADA systems (PLC, HMI, I/O development) o Industrial network design (fiber, radio, cellular, Ethernet) o P&IDs and control system documentation · Proven ability to manage project scope, schedule, and budget · Experience preparing and reviewing technical reports and design deliverables · Strong leadership, communication, and client management skills Preferred Qualifications or Good to have: · Experience with water and wastewater treatment facilities · Familiarity with: o Cybersecurity and industrial network security design o Redundant network architectures and failover systems o Control panel design and VFD integration · Experience with AutoCAD and design coordination tools · Experience supporting FAT and SAT testing · Background working with public agencies or municipal clients

Job Description Job Title: Senior Instrument Engineer I Department: Engineering Reports To: Lead Electrical and Instrumentation Engineer Location: Houston, Texas FLSA Status: Exempt Summary: A Senior Electrical & Instrumentation Engineer I plays a critical role in shaping both the electrical and instrument & control engineering functions. This role is responsible for significant technical leadership on multiple projects, guiding design philosophy, ensuring technical integrity across both disciplines, and actively participating in the development of the engineering team and standards. Duties and Responsibilities: • Provision of lead technical direction and oversight for multiple concurrent instrumentation, control, and electrical engineering projects or project phases., • Establish design philosophies, criteria, and guidelines for instrumentation, control, and electrical engineering deliverables., • Perform high-level technical reviews and approvals for all I&E engineering documentation, ensuring quality and compliance., • Guide in the resolution of complex and multidisciplinary technical challenges involving power systems, control systems, and integrated facility design., • Mentoring and development of instrumentation and electrical engineers, fostering their growth and ensuring technical Excellence., • Significant contribution to project planning, scheduling, and budgeting from an instrumentation and electrical engineering perspective., • Representation of the I&E discipline in client meetings, inter-discipline coordination, and regulatory interactions., • Drive continuous improvement initiatives for instrumentation and electrical engineering processes, tools, and standards., • Demonstrated expertise in electrical power system design, protection, and control, as well as instrumentation and control system design, implementation, and lifecycle management for large-scale industrial facilities., • Proven ability to manage and lead technical teams effectively., • Expert proficiency with electrical design and analysis software, as well as multiple control system platforms (DCS, PLC, SCADA) and related design/simulation software., • Deep understanding and practical application of relevant industry codes and standards., • Exceptional problem-solving, decision-making, and communication skills., • Demonstrated ability to innovate and optimize instrumentation and electrical engineering solutions., • Experience in developing and implementing engineering standards and best practices., • Minimum: Bachelor’s degree (ABET) Electrical Engineering, • Preferred: Master’s degree (ABET) Electrical Engineering, • 10-15 years Minimum Work Experience, • Prolonged periods of sitting at a desk and working on a computer., • Occasional lifting of office supplies or equipment up to 20 pounds., • Ability to move around the office to access files, office equipment, and attend meetings. Onward Solutions offers unprecedented opportunity for career advancement to those who seek reward for excellent performance, sound judgement and strong work ethic. We envision a future where energy and associated infrastructure projects are delivered with unmatched safety, precision, reliability, and integrity. Our commitment to inclusion and diversity, and dedication to high ethical standards echoes throughout our workforce. Benefits: The successful candidate will receive a competitive salary and will be eligible to participate in a comprehensive benefits package which includes medical, dental, and vision, basic life insurance, AD&D insurance, 401k, and PTO. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, physical or mental disability, veteran status, or any other classification protected by federal, state or local law.

Job Description Urban Grid is a leading independent power producer (IPP) delivering reliable, utility-scale solar and storage solutions to help meet America’s unprecedented energy demand. We develop, own and operate projects that strengthen local economies through long-term partnerships and responsible land stewardship. By integrating agrivoltaics into our land management practices, we enhance soil health, support local farmers and benefit the communities we serve. With a strong focus on execution and integrity, we are committed to being a trusted domestic energy provider and responsible corporate citizen. Urban Grid is headquartered in Houston, Texas, and operates across the United States with a growing portfolio that includes 12,000 megawatts of development assets. We continue to maintain our optionality to co-locate with battery storage based on customer demand, ensuring flexibility and responsiveness in our energy solutions. Since becoming an IPP in 2023, we have successfully brought five solar projects online, begun construction on three additional projects and are actively advancing one gigawatt of capacity into pre-construction. To learn more, please visit . Urban Grid is a portfolio company of Brookfield. one of the world’s largest owners and operators of renewable power and climate transition assets. Job Summary Join our dynamic team at Urban Grid as we look for a passionate and skilled Manager of Development Engineering to help us drive our innovative projects forward! We're hoping to find someone with 5 to 10 years of expertise in utility-scale solar power plant design as well as battery storage design and construction. In this role, you'll lead our Development Engineering team as they assess the technical feasibility and risks associated with our development projects. Your success will be measured by the achievements of your team members, the effectiveness of each project evaluation, and how well the projects progress through the RFP, design, and construction stages. Additionally, you'll play a crucial role in mentoring and supporting your team to help them achieve their individual project goals. Ideally, you'll have hands-on experience with the construction of solar PV systems, covering everything from the DC side of the panels (modules) through the inverter, all the way to the collector substation. Experience in energy storage design and construction is a plus! As the Manager of Development Engineering, you'll handle key tasks at each stage of the project, ensuring you have a clear understanding of the processes you're overseeing. Occasionally, you may also take on some project engineering responsibilities. Responsibilities • Establish standards, best practices, and incorporate lessons learned for contract technical documents and drawings that are developed during the EPC bidding and design phase and lessons learned during the construction process., • Identify and develop specific project milestones for the Development Engineering team and support successful completion of those milestones during the development and preconstruction process., • Manage the technical design and assumptions of development projects through preconstruction and fully understand all aspects of the handoff process from development to the Construction team, • Standardize the engineering portion of the EPC RFP process and support other departments in evaluating the EPC bids., • Responsible for ensuring all Owner technical specifications are accurate, up to date, and implemented appropriately by the Development Engineering team., • Provide mentoring and guidance to the Development Engineering team on technical and managerial matters., • Review and provide written input on technical drawings related to BESS, High Voltage, Substation, SCADA, and PV plant design to identify errors and to provide valuable engineering advice., • Support the Construction team during the bidding and design process to effectively triage and respond to any Requests for Information (RFIs) while coordinating with internal and external engineering resources., • Review appropriately detailed design drawings for streamlined communication with Internal Departments, External Consultants, Permitting Agencies, Authorities Having Jurisdiction (AHJ), Contractors, and Utilities., • Develop standards to streamline working with third party Owners’ Engineers (OE) to ensure consistency and adequate services are provided by OE to Owner., • Negotiate, develop, review contracts, and manage OE service relationships., • Assist with standardizing engineering contract deliverables from consultants, racking vendors, EPCs, and other third parties to anticipate Independent Engineer (IE) inquiries and ensure that the needed information is incorporated into our contract requirements and specifications, so the information is readily available during the Independent Engineer reporting process., • Develop a program that provides accountability and streamlines IE responses during the initial financing phase of the project to support financing milestones., • Provide technical expertise and support in all aspects of project implementation during initial procurement, design, development, and hand-over to construction., • Ensure the Development Engineering team has implemented the latest standards and codes into the design documents, contract documents, and engineering process., • Develop scope of work documents, specifications, and technical exhibits in response to project specific conditions or equipment needs., • Provide recommendations and/or mitigation measures to resolve all risks, cost adders, and anticipated construction issues during the development design process, prior to construction., • Facilitate communication between all project engineering disciplines (electrical, civil, geotechnical, structural, and mechanical, instrumentation and controls) to identify and resolve design and construction issues. Requirements • Bachelor’s degree in engineering (preferably electrical, mechanical, or renewable energy-related fields). Advanced degrees or relevant certifications are a plus., • 5 to 10 Years of engineering and/or construction experience is required., • Must be able to manage a team of professionals., • Direct experience in power plant engineering design and construction preferred., • Working knowledge of relevant engineering electrical codes and standards (NEC, IEEE, ASTM and others)., • Must be proficient and be able to redline and communicate comments on design drawings for utility scale solar power plants., • Preferred design and construction knowledge of both DC and three-phase AC electric systems., • Record Drawing review, management, and oversight experience required., • Familiarity with project management software and tools (e.g., Microsoft Project, Primavera, Procore, CAD software, etc)., • Must have the ability to lead work to execution and resolve issues in a team environment., • Must be self-motivated and be able to work both individually and/or in a collaborative team environment with minimal guidance., • Must be able to manage multiple deadlines and priorities while creating and maintaining internal and external relationships with contractors and co-workers, respectively., • Must have excellent oral and written communication skills. Must be able to coordinate and communicate work with multiple disciplines, organizations, agencies, vendors, and contractors. At Urban Grid, we’re thrilled to offer a fantastic benefits package that includes medical, dental, and vision coverage, along with a health savings account and flexible spending account. We also provide company-paid life insurance, short-term disability, long-term disability, paid parental leave and optional life insurance. Enjoy a retirement plan with matching contributions as part of our full-time positions, all wrapped up with a competitive salary and bonus opportunities!

Job Description POSITION SUMMARY The Mechanical Design Engineer is responsible for designing, developing, and improving mechanical systems for drill fluid handling and pressure containing equipment and related products. This role involves applying engineering principles to create innovative solutions that meet performance, safety, and reliability standards while adhering to industry regulations and company objectives. DUTIES & RESPONSIBILITIES • Works independently to assist in the design and development of drilling tools and equipment required to meet customer’s needs or market demands., • Create detailed 3D models and engineering drawings using CAD software (e.g., SolidWorks, Creo)., • Perform engineering calculations and analyses (stress, fatigue, thermal, etc.) to ensure product integrity., • Collaborate with cross-functional teams including manufacturing, quality, and supply chain to ensure design feasibility and cost-effectiveness., • Develop and prepare engineering documentation for drawings, schematic drawings, material specification, or other data required., • Works independently to assist or conduct problem studies leading to recommendations for upgrading/improving existing equipment in field or lab., • Works independently to perform product testing functions in a test lab facility and/or field locations., • Provide technical support for production and field operations as needed., • Ensure compliance with applicable industry standards (API, ISO) and company quality, • Participate in continuous improvement initiatives to enhance product performance and reduce costs., • Perform other assignments as directed., • Undertake all duties in a safe and efficient manner, promoting safe working practices, complying with all company policies including but not limited to the Forum Energy Technologies Code of Conduct and OSHA Safety rules. QUALIFICATIONS Education: • 5-8 years of mechanical design experience, preferably in oil & gas or drilling equipment. Familiarity or experience with drilling products such as top drive systems, triplex fluid end systems and/or high-pressure mud gate valves. SKILLS & KNOWLEDGE • Proficiency in CAD software (SolidWorks, Creo, or similar)., • Strong understanding of mechanical design principles, materials, and manufacturing processes., • Develop an advanced understanding of all phases of field operations and equipment, with particular attention to the individuals’ field of expertise, • Maintain proficiency in the individual’s field of expertise through the study of related literature and of new concepts and/or equipment developed by others, • Advanced knowledge of engineering standards (API, ASME, NACE), including codes and regulations affecting design development. Ability to perform engineering analyses and interpret results., • Experience with product design review submittal process with ABS, DNV, ATEX, Lloyds, etc., a plus., • Able to communicate with internal and external customers in a professional manner, • Maintain skill in operating a personal computer, including word processing, spreadsheet, database and computer-aided-design software; calculator, etc. PHYSICAL DEMANDS Hand-eye coordination is necessary to operate computers, drafting instruments and various pieces of office equipment. While performing the duties of this job, the employee is occasionally required to stand; walk; use hands to finger, handle, feel or operate objects, tools, or controls; and reach with hands and arms. The employee is occasionally required to sit, climb or balance; stoop, kneel, crouch, or crawl; talk or hear. The employee must occasionally lift and/or move up to 40 pounds. Specific vision abilities required by this job included close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. WORK ENVIRONMENT Work is performed mostly in office settings where the noise level in the work environment is usually quiet to moderate. The employee occasionally works in outside weather conditions, near moving mechanical parts, near areas with equipment under pressure, in high or precarious places, exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock and vibration where the noise level can be moderate to high. Adherence with Forum’s HSE Policies is mandatory and appropriate Personal Protection Equipment (PPE) must be worn at all times. TRAVEL Occasional (10%-20%) domestic and international travel may be required. Working hours during traveling can mean early starts and late finishes. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum’s products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

Job Description Location: Houston, Texas Position status: Full-Time Exempt Status: Exempt Company Profile: CNPC USA is a subsidiary of China National Petroleum Company and serves as the North American headquarters. Our mission is to drive innovation through advanced research and development of next-generation technologies for oil and gas exploration and production. Job Summary: CNPC USA is seeking a highly experienced Senior Electronics & Firmware Engineer to lead the design, development, and qualification of high-temperature electronics and embedded firmware for MWD/LWD systems. This position is a key technical role responsible for downhole electronic architecture, high-temperature circuit design, power management, sensor interfacing, and electronics reliability in extreme drilling environments. The ideal candidate will have hands-on experience developing electronics rated ≥175 °ree;C (preferably up to 200 °ree;C) for MWD/LWD tools, with a strong understanding of downhole constraints such as shock, vibration, pressure, and thermal cycling. This role will directly support technology maturation from concept through field deployment and commercialization. Key Responsibilities: • Design, develop, and validate electrical and electronic systems for MWD downhole tools and surface support equipment., • Develop, test, and debug embedded firmware for microcontroller, microprocessor, or DSP-based systems used in downhole measurement and telemetry applications., • Design and evaluate analog and digital circuitry, including signal conditioning, power distribution, sensor interfaces, and communication interfaces., • Support the development of ruggedized electronics for high-temperature, high-shock, high-vibration downhole environments., • Participate in system integration, troubleshooting, root-cause analysis, and performance optimization of tool electronics and firmware., • Define and execute design verification, qualification, reliability, and environmental test programs., • Support manufacturing test, engineering test setups, and service quality assurance for product release and sustainment., • Work closely with mechanical, firmware, test, operations, and field teams to improve tool reliability and field performance., • Contribute to documentation including schematics, interface definitions, test procedures, failure analysis reports, and design records., • Bachelor’s degree in Electrical Engineering, Computer Engineering, Embedded Systems, or related discipline., • 5+ years of experience in electronics and embedded firmware development; for lead-level roles., • Hands-on experience with embedded firmware development in C/C++ for MCU, MPU, or DSP-based systems., • Strong knowledge of analog and digital circuit design, schematic capture, component selection, and board-level debugging., • Experience with signal conditioning, communication interfaces, power electronics/power distribution, and hardware-software integration., • Experience developing products for harsh environments, ideally including downhole, oilfield, aerospace, defense, or industrial ruggedized systems., • Familiarity with laboratory validation tools such as oscilloscopes, logic analyzers, environmental test setups, and automated test methods., • Strong troubleshooting and root-cause analysis capability for mixed hardware/firmware systems.. Preferred Experience: • Experience with MWD/LWD, mud-pulse telemetry, EM telemetry, directional drilling tools, or downhole sensors., • Familiarity with high-temperature electronics, shock/vibration survivability, and pressure-compensated or sealed downhole systems., • Experience with manufacturing test systems, qualification testing, and product commercialization., • Knowledge of sensor integration, downhole measurement systems, and embedded diagnostics., • Prior experience supporting both new product development and sustaining engineering for deployed tools.. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential job functions. While performing the duties of this job, the employee is regularly required to talk or hear. This is a sedentary role; however, some filing, bending and the ability to lift 20lbs is required. Travel: This position requires some overnight international and domestic travel. Local travel between other CNPC USA locations and testing facilities is required. Supervisory Responsibility: This position has no direct supervisory responsibilities, however, it does act as a mentor and point of contact for less experienced engineers. CNPC USA is an Equal Opportunity Employer (EOE). Qualified applicants are considered regardless of race, color, age, sex, sexual orientation, religion, disability, ethnicity, national origin, marital status, veteran status, or any other legally protected status. Disclaimer: The job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Other duties, responsibilities and activities may change or be assigned at any time with or without notice.

Job Description Electrical Engineer Company Name: Confidential Location: Houston, TX Project Focus: MEP Engineering | K-12 & Higher Education | Building Systems Work Setting: Hybrid (Full-Time | Exempt) Salary: $117,000 – $194,000 + Comprehensive Benefits Package Recruited Exclusively By: Luxus | AEC Talent Partners Position Overview Are you a technical visionary ready to transition from production to true project ownership? We are seeking a high-caliber Electrical Engineer to steer the design and execution of sophisticated electrical systems across a premier portfolio of education and institutional projects. In this role, you aren't just designing circuits; you are architecting the environments where the next generation learns and grows. You will serve as a technical authority and a key client-facing ambassador, blending rigorous engineering with strategic mentorship and business development participation. Joining our team means entering a culture that prioritizes professional autonomy within a highly collaborative framework. The firm empowers engineers to act as entrepreneurs, providing the resources of a leading MEP powerhouse with the personal touch of a tight-knit, forward-thinking studio. Here, your career trajectory is defined by your impact—offering a clear pathway to senior leadership, high-level client engagement (including industry galas and events), and the opportunity to leave a lasting legacy on the Texas educational landscape. Core Responsibilities * System Architecture & Design: Lead the full-lifecycle design of complex electrical systems, including power distribution, emergency power, lighting controls, fire alarms, and integrated technology systems. * Technical Stewardship: Perform and oversee advanced engineering calculations and the production of high-fidelity documentation in AutoCAD and Revit, ensuring every deliverable exceeds firm and industry standards. * Project Leadership: Manage multiple concurrent projects with minimal oversight, maintaining accountability for schedules, budgets, and the technical integrity of the final product. * Mentorship & Team Growth: Supervise and cultivate the next generation of talent, providing direct guidance and reviews for interns, designers, and EITs to elevate the team's collective proficiency. * Client Advocacy: Represent the firm as a primary point of contact in client meetings and industry functions (receptions, golf tournaments, and galas), translating complex technical concepts into strategic value. * Compliance & Quality Control: Serve as the final authority on code compliance and project specifications; review shop drawings, RFIs, and submittals, and seal final contract documents as the Engineer of Record. * Field Engineering: Conduct on-site evaluations and prepare comprehensive field reports to verify design conditions and ensure construction aligns perfectly with client objectives. Required Qualifications * Education: Bachelor's Degree in Electrical Engineering from an ABET-accredited institution. * Licensure: Active Professional Engineer (PE) license (or EIT with a clear and immediate path to licensure). * Software Proficiency: Expert-level command of Revit and AutoCAD; proficiency in applicable engineering calculation software. * Experience: Proven ability to manage multiple MEP projects independently within a consulting environment. * Acumen: Strong understanding of business fundamentals, including a working knowledge of project accounting, marketing, and HR integration within an engineering firm. Preferred Qualifications * Sector Expertise: Extensive experience delivering MEP solutions specifically within the K-12 or Higher Education markets. * Licensure Depth: Experience sealing and managing full contract document packages. * BD Drive: Prior involvement in client-facing business development initiatives or local industry associations. About the Firm The firm is a distinguished leader in MEP engineering, renowned for delivering innovative and reliable building systems across Texas. With a storied history of success in the education sector, they combine technical excellence with a culture of mentorship and collaboration. They offer a supportive environment where professional development is incentivized and where engineers are encouraged to engage with the community and clients alike. About Luxus | AEC Talent Partners Luxus is an exclusive AEC recruiting firm managing this search on behalf of the firm. We partner with the most prestigious structural, civil, and architectural firms in the country to connect top-tier talent with legacy-building opportunities. Not the perfect fit for this role? We still want to hear from you. Our network is constantly expanding with exclusive, unlisted positions across the AEC sector. Connect with us today to discuss your career trajectory. Keywords: Electrical Engineer, PE License, MEP Engineering, Revit, AutoCAD, Building Systems, Power Distribution, Lighting Design, Fire Alarm Systems, Education Projects, K-12 Design, Houston Engineering Jobs, Project Management, AEC Industry, Consulting Engineer, Technology Systems

Job DescriptionJob Summary The Electrical Product Engineer is responsible for supporting the design, validation, industrialization, and lifecycle management of high-technology electronic products. This role serves as a key technical interface between design engineering, manufacturing, quality, supply chain, and test teams to ensure robust, cost-effective, and manufacturable electronic products that meet performance, reliability, and regulatory requirements. Key Responsibilities Product Development & Industrialization • Support electrical design transfer from R&D to manufacturing, ensuring design intent, documentation completeness, and manufacturability., • Review schematics, PCB layouts, BOMs, and electrical specifications to identify risks and improvement opportunities., • Lead or support New Product Introduction (NPI) activities, including prototype builds, pilot runs, and ramp to volume production., • Collaborate with design teams to implement DFM, DFA, DFT, and cost-reduction improvements.Manufacturing & Test Support, • Develop, review, and maintain electrical test strategies, including ICT, functional test, boundary scan, and system-level testing., • Troubleshoot electrical issues during manufacturing, test, and field returns using structured root-cause analysis., • Support yield improvement initiatives and corrective actions for electrical failures., • Work closely with contract manufacturers (CMs) and suppliers to resolve technical issues.Quality & Reliability, • Participate in design reviews, FMEA, reliability testing, and qualification activities., • Ensure compliance with applicable standards and regulations (UL, CE, FCC, RoHS, REACH, etc.)., • Support failure analysis, corrective/preventive actions (CAPA), and continuous improvement efforts.Documentation & Lifecycle Management, • Create and maintain electrical documentation including schematics, test specifications, ECOs, and manufacturing work instructions., • Manage product changes throughout the product lifecycle, from NPI through sustaining engineering., • Bachelor’s degree in Electrical Engineering or equivalent., • 3+ years of experience in product engineering, electrical engineering, or manufacturing engineering within the electronics industry., • Strong understanding of electronic circuits, digital and analog design fundamentals., • Experience with PCB design review, component selection, and BOM management., • Hands-on experience with electrical test equipment (oscilloscopes, multimeters, logic analyzers, power supplies)., • Familiarity with NPI processes and electronics manufacturing environments., • Ability to troubleshoot complex electrical issues and drive root-cause analysis., • Experience in high-tech electronics such as IoT, networking, servers, industrial electronics, or embedded systems., • Knowledge of high-speed digital interfaces, power electronics, or RF systems., • Experience working with contract manufacturers and global supply chains., • Familiarity with PLM systems and ECO processes., • Experience with regulatory compliance and product certification., • Strong analytical and problem-solving skills, • Hands-on, detail-oriented engineering mindset, • Ability to manage multiple priorities in a fast-paced environment, • Data-driven decision making HaPa66vyKs

Job Description Hunton Trane, a division of the Hunton Group in Houston, TX, is seeking to hire an Industrial Electrical Engineer. This role is responsible for engineering electrical power distribution, controls, and automation systems for industrial heating, cooling, and utility applications within prospective projects. The Industrial Electrical Engineer provides ongoing technical consultation to support sales and business development efforts, while collaborating closely with the project management team to successfully execute customer projects. This individual will also be responsible for developing comprehensive, value-driven electrical and control system solutions for industrial facilities, with an emphasis on power systems, motor controls, variable frequency drives, and industrial automation. Come work for an industry leader that has been recognized both locally and nationally as one of the Top Places to Work! Responsibilities: • Develop comprehensive electrical design packages, including low-, medium-, and high-voltage power distribution systems, motor control centers (MCCs), grounding, lighting, and cable tray/raceway systems., • Prepare, review, and maintain electrical deliverables such as one-line diagrams, load lists, panel schedules, equipment sizing calculations, and protective device coordination studies., • Specify electrical equipment-including transformers, switchgear, MCCs, VFDs, and UPS systems-in collaboration with Hunton Trane project management, procurement teams, and vendors., • Provide technical leadership throughout the design and construction phases, supporting installation, testing, and commissioning activities., • Ensure all designs and installations comply with applicable codes and standards, including NEC, NFPA, IEEE, NEMA, IEC, and project-specific requirements., • Coordinate with multidisciplinary teams (process, mechanical, civil/structural, instrumentation, and controls) across the full project lifecycle., • Review vendor drawings and submittals, identify and resolve technical discrepancies, and ensure alignment with project specifications., • Participate in hazard analyses, design reviews, and client meetings as a technical representative., • Support project execution through schedule coordination, cost tracking, and progress reporting., • Bachelor's degree in Electrical Engineering, • 5-10+ years of industrial electrical engineering experience, preferably within an EPC or design-build environment., • Demonstrated success delivering industrial or heavy commercial projects such as data centers, petrochemical facilities, power generation plants, manufacturing facilities, or water/wastewater projects., • Strong knowledge of electrical power distribution equipment, protection systems, and industrial electrical standards., • Proficiency with AutoCAD, Revit, SKM, ETAP, or similar power system analysis and design tools., • Solid understanding of construction practices and field execution., • EIT or Professional Engineer (PE) license preferred, or willingness to obtain licensure., • Excellent communication, collaboration, and problem-solving skills., • Ability to travel to project sites and vendor facilities as needed (estimated less than 5%). Job Posted by ApplicantPro

Job Description We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration. As NASA's largest engineering solutions provider working together with NASA at centers across the United States. We have an exciting opportunity for a EMI/EMC Engineer/Analyst - Space Exploration Avionics Systems to join the team with our Engineering Division. The EMI/EMC Engineer/Analyst - Space Exploration Avionics Systems will: • Report directly to the Electronics and Electrical Section Manager as part of a group of 45 other Electronics and Electrical Engineers.Work with NASA engineers and industry partners to support spaceflight avionics systems., • Assist in planning, executing, and analyzing EMI/EMC tests on electronic hardware at NASA JSC and external facilities., • Contribute to test plans, procedures, and reports, while learning from experienced EMI/EMC engineers., • Support design reviews, risk assessments, and system integration across avionics, power, RF, and mechanical teams., • Gain hands-on experience with test equipment, circuit design reviews, and EMI/EMC compliance methods. This position has been posted at multiple levels. Depending on the candidate's experience, requirements, and business needs, we reserve the right to consider candidates at any level for which this position has been advertised. • Typically requires a bachelor's degree in Engineering and a minimum of 2-5 years of experience in the field or in a related area., • Typically requires a bachelor's degree in Engineering and a minimum of 2-5 years of experience in the field or in a related area.BS degree or higher in Physics, Electrical/Electronic Engineering, Systems Engineering, or related field from an accredited institution with 2–10 years of experience.BS degree or higher in Physics, Electrical/Electronic Engineering, Systems Engineering, or related field from an accredited institution with 2–10 years of experience., • Strong analytical background with solid understanding of electronic systems, electromagnetic principles, or system integration., • Hands-on experience or familiarity with lab test equipment (e.g., oscilloscopes, signal generators, spectrum analyzers, RF amplifiers, multimeters, etc)., • Excellent communication skills and ability to work within cross-functional engineering teams., • Exposure to or coursework in RF systems, shielding/filtering, grounding, or signal integrity., • Understanding of key EMI/EMC concepts such as radiated/conducted emissions, susceptibility, electrostatic discharge (ESD), and crosstalk., • Experience reviewing schematics, PCB layouts from academic or professional projects., • Familiarity with tools like SPICE, Matlab/Simulink, LabVIEW, and EMI simulation tools., • Knowledge of MIL-STD-461 or other EMI/EMC test and design standards., • Interest in working in spaceflight environments (avionics, spacecraft systems)., • Exposure to systems integration or multi-disciplinary engineering teams. Benefits: • 401(k), • Dental insurance, • Flexible schedule, • Health insurance, • Paid time off, • Relocation assistance, • Tuition reimbursement, • Vision insurance Job Posted by ApplicantPro

Job Description I&E Engineer – Oil & Gas / Energy Texas (Remote options available) – 10% travel $170,000 per annum Medical, Dental, PTO, 401(k), ESOP A leading infrastructure consulting firm is seeking an Instrumentation and Electrical (I&E) Engineer to join their growing Energy team. Reporting to the Project Manager, this role will be responsible for the design and execution of electrical power and instrumentation systems for midstream and upstream Oil & Gas and pipeline projects. This is a hands-on engineering role, ideal for an experienced professional with a strong background in I&E engineering within the Oil & Gas or Energy sectors, ready to lead design projects, mentor junior engineers, and support technical solutions across projects. Key Responsibilities: • Prepare engineering documents, drawings, plans, and specifications in coordination with Project Managers., • Manage multiple projects, including scheduling, resources, and quality control., • Perform field visits to collect data, support construction, and strengthen client relationships., • Lead projects, making technical recommendations and resolving complex design issues., • Provide mentorship and technical guidance to engineers, EITs, and technical staff., • Interface with utilities, vendors, and contractors to coordinate design and installations., • Develop equipment specifications, perform design reviews, calculations, and analysis., • Support estimates and client presentations to help grow the business., • Build and maintain strong relationships with internal and external clients, understanding their needs and ensuring client satisfaction throughout the project lifecycle., • Monitor project budgets, allocate resources effectively, and identify opportunities to optimize project efficiency and profitability., • Manage quality assurance and control analysis to ensure projects meet or exceed client expectations. Skills & Experience: • 8+ years of experience in I&E engineering, with a preference for Oil & Gas or Energy industry experience., • Proficiency with industrial control systems, low voltage power, protective relays, switchgear, MCCs., • Strong experience with NEC, NFPA 70E, API, and AGA standards., • Excellent knowledge of AutoCAD and Microsoft Office; field/construction support experience is preferred., • Experience leading teams and managing projects with a focus on technical expertise and client relations., • Ability to manage project schedules, budgets, and resources efficiently. Qualifications: • Bachelor’s or Master’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or related field from an ABET-accredited institution., • Professional Engineer (PE) License., • Technical leadership and mentoring experience.

Job Description The Electrical Engineer – MVDC is responsible for providing comprehensive technical support for medium‐voltage direct current (MVDC) products and solutions across the full product lifecycle. This includes supporting internal teams—such as sales, supply chain, manufacturing, and aftersales—as well as external customers and partners. Designed for professionals in an “uprising phase” of their career, this role offers significant growth potential within a rapidly emerging technology area. Essential Duties and Responsibilities • Provide technical support to internal functions, including sales, supply chain, manufacturing, engineering, and aftersales, to ensure proper application and integration of MVDC equipment and solutions., • Respond to technical inquiries from utilities, EPC firms, OEM partners, and field service teams regarding MVDC system performance, electrical design, configuration, installation, and troubleshooting., • Review and interpret electrical drawings, single‐line diagrams, schematics, and technical specifications for MVDC systems and associated components., • Support the investigation and resolution of technical issues, including root‐cause analysis and development of corrective and preventive actions., • Collaborate with engineering and product teams to enhance MVDC product performance, safety, reliability, and manufacturability., • Assist in the preparation and update of technical documentation such as specifications, test procedures, design packages, manuals, and technical reports., • Provide technical expertise during sales and proposal activities, including equipment sizing, specification compliance evaluations, and clarification of customer requirements., • Support supply chain operations by evaluating technical compliance of purchased components, reviewing supplier documentation, and providing engineering input during vendor selection., • Assist field service and aftersales personnel during commissioning, troubleshooting, and warranty assessments of MVDC systems., • Bachelor’s degree in Electrical Engineering or a closely related field., • 2 years of experience in MVDC, HVDC, power electronics, electric utility systems, or related power engineering domains., • Strong understanding of electrical systems behavior in DC applications, including converters, protection schemes, switchgear, and power electronics., • Ability to read and interpret electrical schematics, wiring diagrams, and system-level documentation., • Experience working with electric utilities, EPC firms, power electronics manufacturers, or companies involved in MVDC/HVDC infrastructure., • Familiarity with industry standards such as IEC, IEEE, CIGRÉ, and applicable electrical codes., • Knowledge of DC system integration, converter technologies (VSC/CSC), DC protection strategies, and grid applications.