Electrical engineering technology jobs in Austin, Texas - Page 3Create job alerts

Job DescriptionAnalog/Mixed-Signal Design Engineer focusing on high-performance analog-to-digital and digital-to-analog converters. The successful candidate in this role will design high performance transistor level circuits starting from initial specification, through design and layout supervision, silicon evaluation and characterization to final product introduction to market. Qualifications • MS or PhD Degree in Electrical Engineering focused on Analog/Mixed-Signal circuit design., • Students who graduated recently or are close to graduation from their PhD program preferred., • Familiarity with high-speed, high-resolution analog-to-digital (ADC) or digital-to-analog (DAC) data converter design and building block circuits such as bandgap reference, op-amp, comparators, oscillators, DLL, PLL etc., • Must have experience with evaluating silicon on bench and familiarity with standard lab equipment, • Strong intuitive and analytical understanding of transistor-level circuit design including noise and mismatch analysis, • Experience with analog and digital behavioral modeling, • Familiar with Cadence schematic capture, virtuoso, Spectre and/or HSPICE circuit simulation tools, • Must be familiar with layout parasitic extraction tools and layout dependent impairments in advanced CMOS processes, • Must be able to work independently, create and adhere to schedules, • Must possess strong written and verbal communication skills with an ability to work with teams spread across geographic locations

Job DescriptionExperience: 7 - 15 YearsLocation: Austin, TexasMandatory Requirement: 5+ years (or equivalent) of analog / mixed-signal IC design experience, including complex high-speed blocks such as DACs, ADCs, PLLs, SerDes-related analog, high-speed timing circuits, phase interpolators, etc., with top-level/system understanding. Experience designing in advanced process nodes such as FinFET and/or GAA. Meaningful industry tapeout exposure and familiarity with signoff/tapeout procedures (strong preference for being around a couple of tapeouts). Proficiency with Cadence custom/analog design tools (Virtuoso / ADE) and Spectre. Hands-on design experience must be silicon IC design (on-chip RF/AMS). (Note: PCB / antenna-only RF backgrounds are not a fit for this role) B.S. in Electrical Engineering / Computer Engineering (or equivalent) required. Ability to work on-site in Austin, TX, 5 days a week. About the Role Build the analog front-end (AFE) that interfaces a next-generation coherent optical DSP with optical modules. This is cutting-edge analog/RF/mixed-signal IC design at extreme bandwidths and tight performance margins in advanced technology nodes (FinFET / GAA). This role sits within the growing Austin, TX team (a key nucleus of our broader analog organization) Responsibilities * Design and deliver high-speed analog/mixed-signal/RF silicon circuits enabling wideband TX/RX chains (DAC/ADC-based AFE for coherent optical). * Own block execution end-to-end: participate in/challenge spec definition, explore architectures/topologies, and drive circuit implementation in advanced nodes. * Develop ultra-wideband building blocks (e.g., wideband amplifiers/drivers and other high-speed analog circuits) to meet aggressive requirements for bandwidth, linearity, noise, and power. * Partner closely with layout/physical design to guide implementation for high-speed, low-noise performance; run post-layout optimization and close on signoff-quality results. * Integrate blocks into the full analog system and support tapeout/signoff readiness through reviews, documentation, and cross-site collaboration. Must Haves * 5+ years (or equivalent) of analog / mixed-signal IC design experience, including complex high-speed blocks such as DACs, ADCs, PLLs, SerDes-related analog, high-speed timing circuits, phase interpolators, etc., with top-level/system understanding. * Experience designing in advanced process nodes such as FinFET and/or GAA. * Meaningful industry tapeout exposure and familiarity with signoff/tapeout procedures (strong preference for being around a couple of tapeouts). * Proficiency with Cadence custom/analog design tools (Virtuoso / ADE) and Spectre. * Hands-on design experience must be silicon IC design (on-chip RF/AMS). PCB / antenna-only RF backgrounds are not a fit for this role. Nice to Haves * Direct experience in high-speed DAC design (especially TX path) and/or high-speed ADC interface design. * Demonstrated success designing ultra-wideband amplifiers/drivers in scaled nodes. * Verilog-A and/or MATLAB modeling experience. * Strong communication, collaboration, and ownership mindset in a fast-moving, cross-site environment. Education * B.S. in Electrical Engineering / Computer Engineering(or equivalent) required. * M.S. / PhD is a plus; we consider equivalent combinations of education and industry impact (e.g., deeper tapeout experience can offset less graduate education).

Job DescriptionExowatt is revolutionizing the energy landscape for the AI era with our groundbreaking P3 system that captures solar energy, stores it as heat, and generates electricity on demand. Founded in 2023 and backed by leading investors including Andreessen Horowitz, Sam Altman, and Felicis, we're committed to providing clean, modular, and scalable power that meets the rapidly growing demands of AI infrastructure. Our mission is to make sustainable renewable energy always available and almost free, enabling technological advancement while protecting our planet. We are seeking an experienced Site Facilities Manager to lead operations at our new Austin, Texas facility. This is a critical hands-on leadership role responsible for bringing online and managing a 48,000 square foot indoor facility that is situated on an 11.2 acre industrial site. As our first facilities leader in Austin, you will be instrumental in establishing operational excellence at this strategic location. The successful candidate will oversee the transition of an existing structure into a fully operational Exowatt facility, manage daily maintenance operations, and build strong relationships with external vendors and service providers. This position reports to the Head of People & Talent and will collaborate closely with teams across engineering, manufacturing, product, and corporate functions. This position is based in Austin, TX. Exowatt is only considering candidates based in the Austin area. Key Responsibilities • Facility Startup & Operations, • Lead the buildout and commissioning of the Austin facility, transforming an existing structure into a fully operational facility and site, • Develop and implement facility management systems, procedures, and documentation for the for the 48,000 sq ft facility and site, • Manage the 11.2-acre property including grounds maintenance, parking areas, and exterior infrastructure, • Ensure compliance with all local, state, and federal regulations including building codes, fire safety, OSHA, and environmental requirements, • Directly manage and supervise all safety practices, • Daily Maintenance & Operations, • Execute and oversee preventive maintenance programs for all building systems including HVAC, electrical, plumbing, and security, • Perform hands-on maintenance tasks and repairs across mechanical, electrical, and facility systems, • Maintain safety, and operational efficiency of all facility and site areas, • Operate forklifts and other heavy equipment safely and efficiently; maintain equipment logs and safety documentation, • Respond to facility emergencies as needed, • Administration, • Partner with Austin based Chief of Staff to provide regular updates to leadership on facility status, projects, and operational metrics, • Maintain comprehensive documentation including maintenance records, vendor contracts, and compliance certifications, • 5+ years of experience in facility management, industrial operations, or a related field, • Demonstrated experience managing large facilities (40,000+ sq ft) including warehouse or industrial spaces, • Proven track record of vendor management, contract negotiation, and budget oversight, • Strong hands-on maintenance skills across electrical, mechanical, plumbing, and HVAC systems, • Valid forklift certification (or ability to obtain within 30 days of hire), • Knowledge of OSHA regulations, building codes, and safety protocols, • Excellent communication skills with ability to interface with leadership, employees, and external partners, • Ability to lift up to 50 pounds and work in industrial/warehouse environments, • Fluent in Google Workspace, • Must be based in the Austin, TX area, • Must have reliable transportationPreferred Qualifications, • Bachelor's degree in Facilities Management, Engineering, Construction Management, or related field, • Experience bringing new facilities online or leading significant facility buildouts, • Background in renewable energy, manufacturing, or technology sectors, • CFM (Certified Facility Manager) or FMP (Facility Management Professional) certification, • Project management certification (PMP, PRINCE2, or equivalent), • Experience with facility management software (CMMS) and building automation systems

Job Description No sponsorship available. No third-party candidates. This company was founded by a trio of experienced engineers aiming to innovate underwater audio technology. Our client is continuing to scale and will need you, a skilled Senior FPGA Engineer, to play a key role in bringing the bringing the technology to life. What you get to do: -Design and develop embedded systems built on FPGA technology -Create digital logic design using Verilog / SystemVerilog -Implement high-speed DSP algorithms in digital logic -Develop custom IP cores from scratch -Work with innovative simulation tools and write custom test utilities What you need to succeed: -5+ years of RPGA engineering experience -Proven ability to write mathematical algorithms to run on a GPU in Windows -Previous experience using Verilog / SystemVerilog for digital logic design -Hands-on experience with C, embedded C, MATLAB, and/or Python -Bachelors degree in Electrical Engineering or Computer Engineering What’s in it for you: As a full-time employee, you’ll have access to great internal benefits, professional development, and more! Apply online today to learn more about this new opportunity! Company DescriptionTechnology Navigators is a technical staffing firm specialized in recruiting skilled technologists for project-oriented consulting and contract positions. We've been firmly rooted in the Austin technology community since 1999, and have been providing companies that develop, build, and use technology with the people they need to grow their business for over two decades.Technology Navigators is a technical staffing firm specialized in recruiting skilled technologists for project-oriented consulting and contract positions. We've been firmly rooted in the Austin technology community since 1999, and have been providing companies that develop, build, and use technology with the people they need to grow their business for over two decades.

Job DescriptionJohn Cunningham libertyjobs.com #CivilMEP #Texas#Construction #LandDevelopment#Design#ConsultingEngineering#midsenior Company DescriptionLibertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job DescriptionSaronic Technologies is a leader in revolutionizing defense autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations for the Department of Defense (DoD) through autonomous and intelligent platforms. Position OverviewSaronic Technologies is seeking a Senior Electrical Engineer specializing in Radio Frequency (RF) systems to join our Electrical Engineering – Advanced Development group. This role will focus on the research, evaluation, and integration of RF communications and sensing technologies - including radio transceivers, radar systems, antennas, and related electronics - supporting autonomous vessel networks and situational awareness. The ideal candidate has extensive experience in RF system design, testing, and benchmarking, with a strong foundation in wireless communications, spectrum management, and signal propagation in marine environments. This is a technically demanding, research-focused position with opportunities to influence system architecture and future platform capabilities.Key Responsibilities • Lead R&D efforts in RF communications, radar, and electronic sensing technologies for autonomous surface vessels., • Evaluate and benchmark RF hardware and subsystems, including radios, antennas, and signal processing modules across multiple frequency bands (VHF/UHF, L/S/C/X bands)., • Conduct trade studies and comparative analyses of commercial and military-grade RF solutions to inform system selection and integration strategies., • Design, prototype, and test RF systems and supporting electrical architectures, including cabling, shielding, and power interfaces., • Model and analyze RF propagation and link performance in maritime and littoral environments., • Collaborate cross-functionally with autonomy, software, and mechanical teams to ensure seamless integration of communication and sensing systems., • Develop test procedures, perform validation trials, and analyze system performance under operational and environmental conditions., • Author detailed R&D documentation, including technical reports, design specifications, and performance evaluations., • Mentor junior engineers and contribute to Saronic’s RF technology roadmap and internal knowledge base., • Support field testing and vessel trials, including setup and troubleshooting of communication and radar systems.Required Qualifications, • B.S. or M.S. in Electrical Engineering, RF Engineering, or related discipline., • 7+ years of professional experience in RF system design, testing, and integration -preferably in maritime, automotive, aerospace, or defense applications., • Deep understanding of RF theory, antenna design, and signal propagation, including real-world marine effects (multipath, reflection, attenuation)., • Hands-on experience with RF instrumentation (spectrum analyzers, network analyzers, signal generators, power meters, etc.)., • Proven ability to conduct trade studies and technology benchmarking for RF components and systems., • Familiarity with communications protocols such as Ethernet, CAN, and serial interfaces, and with wireless standards (LTE, SATCOM, mesh networking)., • Strong documentation and communication skills; able to translate test results into actionable design insights., • Ability to work effectively in both lab and field test environments (dockside, at-sea, and range conditions).Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies., • Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

Job Description The future of AI — whether in training or evaluation, classical ML or agentic workflows — starts with high-quality data. At HumanSignal, we're building the platform that powers the creation, curation, and evaluation of that data. From fine-tuning foundation models to validating agent behaviors in production, our tools are used by leading AI teams to ensure models are grounded in real-world signal, not noise. Our open-source product, Label Studio, has become the de facto standard for labeling and evaluating data across modalities — from text and images to time series and agents-in-environments. With over 250,000 users and hundreds of millions of labeled samples, it's the most widely adopted OSS solution for teams working on building AI systems. Label Studio Enterprise builds on that traction with the security, collaboration, and scalability features needed to support mission-critical AI pipelines — powering everything from model training datasets to eval test sets to continuous feedback loops.We started before foundation models were mainstream, and we're doubling down now that AI is eating the world. If you're excited to help leading AI teams build smarter, more accurate systems — we'd love to talk. Software Engineering Expert - Code Annotation & Evaluation SpecialistAbout the Role HumanSignal is seeking highly qualified software engineering and computer science experts to contribute to cutting-edge AI development projects. This role involves evaluating, annotating, and validating code across multiple programming languages and domains to improve AI model performance in software development and problem-solving. Compensation Up to $110 USD/hour based on qualifications and project complexity Required QualificationsEducation • Master's degree required in a computer science or software engineering-related field, • PhD strongly preferred in:, • Computer Science, • Software Engineering, • Computer Engineering, • Computational Science, • Information Science, • Computer Science, • Software Engineering, • Computer Engineering, • Computational Science, • Information Technology (with strong programming foundation), • Data Science/Machine Learning, • Electrical Engineering (with software emphasis)Responsibilities, • Review and evaluate code for correctness, efficiency, and best practices, • Annotate code logic, algorithms, and implementation approaches, • Validate AI-generated code across various programming languages and frameworks, • Identify bugs, security vulnerabilities, and performance issues, • Provide detailed feedback on code quality, structure, and documentation, • Work with problems spanning algorithms, data structures, system design, and software architectureQualifications, • Deep understanding of software engineering principles across multiple domains, • Proficiency in multiple programming languages, • Strong analytical and problem-solving skills, • Excellent attention to detail and code quality standards, • Ability to clearly articulate technical reasoning and trade-offs, • Experience with version control, testing frameworks, and development tools, • Familiarity with software development methodologies, • Ability to work independently and meet deadlinesWork Details, • Flexible, project-based work - work on your own schedule, • Remote position - work from anywhere, • Variable hours based on project availability and your capacity, • Ongoing training and calibration provided, • Quality-focused environment with performance feedbackIdeal Candidate Profile, • Active software engineers, researchers, professors, or recent graduates in CS/engineering fields, • Strong GitHub/portfolio or demonstrated technical expertise, • Experience in software development, research, or industry applications, • Submit CV/resume highlighting technical qualifications, • Provide proof of advanced degree(s), • Complete a brief coding assessment, • Participate in a qualification review

Job DescriptionAbout us: Mythic is building the future of AI computing with breakthrough analog technology that delivers 100× the performance of traditional digital systems at the same power and cost. This unlocks bigger, more capable models and faster, more responsive applications—whether in edge devices like drones, robotics, and sensors, or in cloud and data center environments. Our technology powers everything from large language models and CNNs to advanced signal processing, and is engineered to operate from –40 °ree;C to +125 °ree;C, making it ideal for industrial, automotive, aerospace, and defense. We’ve raised over $100M from world-class investors including Softbank, Threshold Ventures, Lux Capital, and DCVC, and secured multi-million-dollar customer contracts across multiple markets. Mythic's Digital Design Team is seeking a Silicon Emulation Engineer to support the development and validation of AI accelerator and AI-centric SoCs using hardware emulation platforms. This role is critical to enabling early bring-up, software validation, and performance analysis of neural network accelerators prior to silicon availability. The engineer will work closely with RTL, verification, compiler, firmware, and ML software teams to ensure functional correctness, performance targets, and system-level integration of AI workloads.What You'll Do • Develop and maintain emulation platforms for AI accelerator / AI-centric SoCs, • Integrate large-scale RTL (compute, DMA, memory subsystems, interconnects) into emulation environments, • Enable early firmware, driver, runtime, and ML stack bring-up on emulated hardware, • Support execution of AI inference workloads (e.g., CNNs, transformers) on emulated Mythic accelerators, • Collaborate with compiler, runtime, and ML teams to debug HW/SW co-design issues, • Develop scripts and automation for emulation builds, regressions, and workload execution, • Analyze performance, bandwidth utilization, latency, and throughput of AI workloads in emulation, • Debug complex issues spanning RTL, firmware, drivers, and user-space ML frameworks, • Support post-silicon correlation and performance validation when applicable, • Document emulation flows, performance methodologies, and debug proceduresWhat We're Looking For, • Bachelor’s, Master's, or Doctorate degree in Electrical Engineering, Computer Engineering, Computer Science, or related field, • Strong understanding of SoC architectures and AI accelerator design concepts, • Experience with RTL simulation and emulation (Verilog/SystemVerilog), • Familiarity with hardware emulation platforms (e.g. Cadence Palladium), • Experience working in Linux-based environments, • Proficiency in scripting (Python, Tcl, Bash), • Strong debugging skills across hardware and software layersNice to Have, • Experience with NPU, DSP, or GPU-class accelerators, • Experience running or debugging ML inference workloads on pre-silicon platforms, • Knowledge of AI software stacks (runtime, compiler, graph execution), • Familiarity with DMA engines, memory hierarchies, and high-bandwidth interconnects, • Understanding of AXI/AMBA protocols and cache coherency, • Experience with FPGA prototyping or hybrid emulation flows, • Exposure to performance modeling or architectural trade-off analysisThe proposed salary range for this position is $120,000–$225,000 annually. Actual compensation depends on experience, skills, qualifications, and location.At Mythic, we foster a collaborative and respectful environment where people can do their best work. We hire smart, capable individuals, provide the tools and support they need, and trust them to deliver. Our team brings a wide range of experiences and perspectives, which we see as a strength in solving hard problems together. We value professionalism, creativity, and integrity, and strive to make Mythic a place where every employee feels they belong and can contribute meaningfully.

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Job Overview We are seeking a talented and motivated Marine Compliance Engineer to support the design, analysis, and development of autonomous surface vessels. This role will provide hands-on experience in traditional ship design and advanced autonomous technologies; driving impact in defense innovation.Responsibilities • Advise engineering team on applicable maritime standards and regulations, • Support reliability engineering team on requirements definition and tracking, • Participate in systems engineering activities including concept development, system design, integration, and testing, • Perform internal audits for compliance against maritime standards prior to release of drawings to class societies or flag state bodies., • Track and adjudicate comments received from class society reviews, • Support the engineering design cycle process as a subject matter expert to ensure teams adhere to our hardware design best practices, and analysis best practices, • Develop and maintain engineering design best practices to expedite engineering workflows, • Research and stay updated on new developments in naval architecture, marine engineering, autonomous technology, and defense requirements, • Maintain up-to-date technical documentation for system requirements, testing requirements, verification and validationQualifications, • Bachelor’s degree or higher in Naval Architecture, Marine Engineering, Mechanical Engineering, Structural Engineer, Ocean Engineering, or a related field, • 5+ years of engineering experience in designing to or verify class society rules, • Experience working on a variety of vessel sizes and types within the marine industry, such as military vessels, high speed craft, and large commercial ships, • Strong fundamentals in core marine design principles, including naval architecture, structures, mechanical, electrical, etc., • Strong expertise with marine standards, processes, and regulations such as ABS, DNV, LR, USCG, RINA, etc., • Modeling/CAD experience such as Rhino, AutoCAD, NxPhysical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Occasional standing and walking within the office., • Manual dexterity to operate a computer keyboard, mouse, and other office equipment., • Visual acuity to read screens, documents, and reports., • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies., • Lifting and carrying items up to 20 pounds occasionally (e.g., office supplies, packages). Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage

Job Description$21 - 26 per hour - Paid Training - All shifts - Air conditioned and heated work place. Engineering Technicians and Manufacturing Technicians needed for a 18 month contract (direct hire possible) for the leading manufacturer of Ion implanters in the world located in Austin, Texas. Relevant work experience require. Must be okay with hands-on work. What you need to have: • Experience in testing and troubleshooting of assembly of electronics and electro mechanical systems, design circuitry, prototype model, • Troubleshoot System Level and component level problems in electrical and mechanical systems and sub-system, • Blueprints and electrical schematics, • Performs routine to moderately complex electro-mechanical technical functions and activities such as design, test, checkout, fabrication, modification, troubleshooting and assembly of electronics and electro-mechanical systems, experimental design circuitry, prototype models, specialized test equipment, tools and test fixtures., • May test and troubleshoot system level and component level problems in electrical and mechanical systems and sub-systems., • May perform new system and NPI installations and field upgrades., • Works from schematics, diagrams, written and verbal descriptions, layouts or plans to perform routine testing and troubleshooting., • Compiles logbooks and test procedures documentation utilizing good writing skills., • May perform mechanical, electrical, pneumatic & vacuum and process testing on companies platforms to Engineering and Manufacturing documentation and specifications., • Becomes familiar with current manufacturing and/or engineering processes and stays informed of any changes in procedures. Assists in the correction of problems., • May perform rework as a result of testing., • Generates Quality Notifications., • Additionally, because this position may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.What’s In It For You?, • We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations., • Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada., • Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you., • Medical, Dental & Vision Benefits, • 401K Retirement Saving Plan, • Life & Disability Insurance, • Direct Deposit & weekly epayroll, • Employee Discount Programs What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice: Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job Description Electrical Engineer - PCB About Paradromics Brain-related illness is one of the last great frontiers in medicine, not because the brain is unknowable, but because it has been inaccessible. Paradromics is building a brain-computer interface (BCI) platform that records brain activity at the highest possible resolution: the individual neuron. AI algorithms then decode this massive amount of brain-data, enabling the seamless translation of thought into treatments. Our first clinical application, the Connexus® BCI, will help people who are unable to speak, due to ALS, spinal cord injuries and stroke, to communicate independently through digital devices. However, the capabilities of our BCI platform go far beyond our first application. With the brain in direct communication with digital devices, we can leverage technology to transform how we treat conditions ranging from sensory and motor deficits to untreatable mental illness. The Role The Electrical (PCB) Engineer will transform high-level electrical design intent into complete, manufacturable board designs. Working closely with senior engineers, this person will produce schematics, assist with component selection and substitution, and lay out complex, multi-layer PCBs. They will prepare clean release packages and coordinate with vendors to ensure successful fabrication. Once boards arrive, they will inspect, test, and support bring-up to ensure readiness for system integration. Responsibilities • Translate system-level electrical design intent into detailed schematics., • Select components, evaluate alternates, and maintain component libraries., • Perform PCB layout for multi-layer boards (6+ layers), including high-speed, low-noise, and RF routing., • Generate complete release documentation packages, including drawings, BOMs, and revision notes., • Coordinate with PCB fabrication and assembly vendors; incorporate DFM/DFA feedback., • Support PCB bring-up, debugging, and characterization using oscilloscopes, power supplies, DMMs, and similar equipment., • Develop simple test fixtures or scripts to support inspection and testing., • Contribute to design reviews and document decision-making outcomes., • Proficiency in PCB design software, ideally Altium Designer., • Demonstrated experience creating schematics and selecting electronic components., • Experience with component library management (symbols, footprints, 3D models)., • Proven ability to route low-noise, high-speed, or RF signals on 6+ layer PCBs., • Understanding of design-for-test, including test-point strategy and module isolation., • Ability to produce clean documentation: release drawings, BOMs, revision notes., • Experience working with PCB vendors and applying DFM/DFA best practices., • Hands-on experience inspecting and testing fabricated PCBs using standard lab instruments., • Strong communication skills, ability to take feedback, and comfort working in a fast-paced hardware development environment., • Experience using Python or similar scripting languages to control lab instruments., • Experience with rigid-flex PCB design., • Experience in wireless power transfer design. Powered by JazzHR evgnhR5LkV

Job Description Founded in 1908, Flintco now employs more than 750 people in 10 cities serving clients in healthcare, renewable energy, education, hospitality, sports and industrial. Flintco also self-performs concrete, steel erection and excavation. Nothing matters more to us than the quality and growth of our people. Our teams are smart, humble and disciplined. Flintco is recognized for its commitment to safety and quality, using Lean principles as a guide to continuous improvement. The five guiding principles of our Ethos are: Safety, Integrity, Quality, Accountability and Honesty. We live it every day. Job Summary A Senior Project Engineer has responsibilities inclusive of those of a Project Engineer. The Senior Project Engineer is an individual who has performed the tasks of a Project Engineer effectively, has demonstrated the potential to advance to an Assistant Project Manager role in the future, and has at least 2-3 years of experience as a Project Engineer or similar role. Flintco Senior Project Engineers are responsible for assisting Project Manager and Superintendent by performing specifically delegated administrative and technical work assignments. Essential Duties and Responsibilities All duties and responsibilities include the following; however, other duties may be assigned. To perform in this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Assist Project Manager in writing/reviewing subcontracts and purchase orders to assure that the scope of work is accurate and complete; that all the necessary provisions are included; and that the contract amounts are correct., • Review thoroughly the Project Documents and become familiar with Project participants (i.e. Architect, Owner, local authorities, Subcontractors and Suppliers) to enable productive day-to-day operations between the company and other participants. Represent the company in project meetings, as required., • Assist in determining submittal requirements and preparing and maintaining submittal log. Expedite materials/equipment from the pre-approval stage through the final delivery stage to ensure the correct material/equipment is delivered to meet the project schedule. Includes reviewing, correcting and obtaining approvals on all submittals., • Assist in developing and maintaining the overall project schedule, and short-term schedules. Make regular site visits to observe and inspect that the project is being built properly and that it is progressing on schedule., • Duties may also include maintaining daily records and preparation and submittal of weekly timesheets and/or prevailing wage payrolls to payroll clerk., • Receive, evaluate and disseminate correspondence, directives, questions, clarifications, and other information between Owner, Architect, Subcontractors, and Suppliers, to ensure the timely response of requested information, and changes and directives are being acted upon by all participants., • Assist in maintaining project files and documentation, including transmittals, telephone conversations, submittals, letters, etc., assuring that project documentation is organized and complete so that a clear and accurate history of the project is maintained., • Assist in keeping estimated and actual cost records current and accurate, and in tracking Subcontractor/Supplier and company self-performed work, to provide justification for billing., • When directed, expedite and obtain all necessary permits (building, occupancy, etc.), all record documents (i.e. as- built drawings, operation & maintenance manuals, warranties, etc.) are received in a timely manner so as to not delay construction progress or payments., • Perform additional duties as assigned and directed by a supervisor or other authorized person. Knowledge/Skills/Ability Knowledge of methods and technology, sufficient to have the ability to determine proper construction sequencing, procurement planning, and review and correct submittals. Ability to maintain, inform and communicate with construction team. Ability to make well-informed decisions on behalf of the company and know when to seek assistance from higher authority after making decisions. Ability to read and interpret construction drawings and specifications accurately. Knowledge of and application skills in Geometry, Trigonometry, and Algebra. Working knowledge of computers and standard company software. Thorough knowledge of company policies and procedures. Education Associates Degree or Bachelor of Science in Engineering, Construction Management or equivalent combination of education, technical training, and related experience. Experience 2-3 years of experience in construction management, construction trades or an equivalent combination of education and experience Certificates, Licenses, Registrations None required. Physical Requirements • Physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this position, the employee is regularly required to stand; walk; use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Occasionally, especially when managing multiple projects and during problematic opening and/or closing phases of projects, mental stress can be taxing., • May be required to work long hours for extended periods of time. Special Job Dimensions The office provides a safe and healthy work environment, is adequately heated and cooled, is free from exposure and extreme conditions, has appropriate lighting and office furnishings, and is smoke-free and drug-free. While performing the duties of this position in the fabrication shop, warehouse, maintenance shop or at a project site, the employee could be regularly exposed to any number of the following, including, but not limited to: moving mechanical parts; moving machinery; high, precarious places (including, but not limited to, being raised several hundred feet in a bucket); close tight quarters; rough and sloped terrain; fumes or airborne particles; drilling and blasting activities; welding activities; toxic or caustic chemicals; the potential of falling rock; and outside weather conditions. The employee may be occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is generally loud. • NOTE – Where allowed, employees who work in positions classified as “safety-sensitive” can be disciplined if they test positive for marijuana or its metabolites, even if they have a valid state medical marijuana license. In addition, Flintco may also refuse to hire applicants for safety-sensitive jobs who test positive for marijuana as part of a pre-employment drug test, even if those applicants can produce a valid medical marijuana patient license. #ON-SITE

Job Description Overall Scope Learn project management methods and strategies, and become familiar with company systems, while performing various administrative assignments in support of a designated project or group of projects. With supervisory direction, establish goals and accomplish assigned tasks within prescribed time frames and financial parameters. Project Manager Duties Include: • Participate in construction document analysis to develop clear and consistent interpretations., • Become familiar with the materials, equipment, and components of the technical systems installed by Walker., • Advise project management of potential problems, work interferences, schedule difficulties, and the like, as it relates to assigned duties. Learn how Walker can circumvent and/or resolve such problems., • Compose and edit letters, memos, reports, and procedures as directed., • Process day-to-day administrative items (i.e., expense reports, supply requisitions, RFI’s, submittals, shop drawings, procurement, quantity take-offs, etc.) per supervisor’s direction., • Prepare special reports, studies, and statistical analysis per supervisor’s request. May require research, development and/or interpretation of data with little supervision or instruction., • Learn how to interpret project schedules, anticipate manpower requirements and measure subcontractor performance., • Assist with the research and preparation of field change requests to resolve design issues., • Participate in the continuous updating and accurate generation of as-built documents., • Attend project coordination and owner/contractor/architect/engineer meetings as directed., • Assume a proactive approach to career development. Utilize available resources within Walker as well as request alternative instruction to learn how to become a successful project manager., • Perform additional assignments per supervisor’s direction. Travel Requirements: 0 - 25% (may vary significantly among individuals in this position) Skills, Knowledge, Qualifications & Experience: • 4-yr electrical engineering or construction science degree (or commensurate levels of technical training and related construction experience), • 0-2 years of construction and/or general business experience, • Strong verbal and written communication skills, • Outstanding organizational skills, • Excellent MS Office skills and ability/desire to learn new software systems, • Must obtain OSHA-30 certification within six (6) months from date of hire, • Must be courteous, professional, diplomatic, and highly motivated, • Employment is contingent upon satisfying all jobsite-specific access requirements, with no outstanding restrictions from any jobsite or from working with any of Walker’s partnering General Contractors, Owners, Customers, etc. WORK ENVIRONMENT · This job operates in a client project environment with exposure to employee, subcontractors and trades. PHYSICAL DEMANDS · While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. · This job operates in a client project environment with exposure to employee, subcontractors and trades. · Ability to freely access all points of a construction site in wide-ranging climates and environment · Ability to comprehend forms in space and understand relationships of plane and solid objects. May be used in such tasks as blueprint reading and in solving geometry problems. Frequently described as the ability to “visualize” objects of two and three dimensions, or to think visually of geometric forms. · Ability to manipulate materials and/or equipment up to 50 lbs. The frequency of manipulation if frequently. · Ability to move up or mount by using the hands or feet to include: Ladders - Step stool, 8' to 10' ladder, extension ladder Stairways - 3 or more flights · To bend forward or down from the middle of the waist or the middle of the back, to bend, downwards, to lower oneself and/or to move freely on hands and knees between 20-50 times daily · To stretch out, extend, or put forth a bodily part. To touch or grasp something, by extending or stretching. To touch, lift, hold or operate with the hands up to 50 times daily. · To perceive or comprehend by the sense of sight. Characteristics are: Focus, Color perception or depth perception. · The ability to operate or convey in a vehicle, Car, Commercial Vehicle Position Type/Expected Hours of Work · This is a full-time position; days and hours of work are Monday through Friday, 7:00 a.m. to 5 p.m. Education and Qualifications High School Diploma A degree in Construction Management or Project Management or equivalent experience. Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Company DescriptionWalker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio. We have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.Walker Engineering Inc. was formed in Dallas, Texas in 1981. Since then the company has grown from three employees to one of the largest electrical contractors and network technology providers in the states of Texas with offices in Houston, Dallas/Fort Worth, Austin, and San Antonio.\r\n\r\nWe have successfully built projects in many diverse market segments and the revenue for the company now exceeds $1B. The over 2,000 employees at Walker Engineering strive to deliver high-quality work at a fair price. The principle of Trust Built on Performance is provided to each client regardless of the size of the project.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Electronics Manufacturing Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge manufacturing processes for high-reliability, high-volume satellites, we would like to hear from you. In this position, you will be responsible for the manufacturing of Cesium’s diverse array of electronic assemblies for satellites and other aerospace platforms. Cesium partners with contract manufacturers (CMs) to fabricate and assemble our products; as such, you will serve as Cesium’s in-house expert and primary point-of-contact for our CMs. Day-to-day responsibilities range from highly technical manufacturing analysis and design – such as choosing solder chemistries and root-causing non-compliances – to administrative functions like supplier review and process documentation. Your work will have a direct impact on the success of the company. You will work closely with the engineering team, program management, and external contract manufacturers to industrialize space products for a growing market that combines the rigor of space with the scale of commercial electronics.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • A Bachelor of Science (BS) in Mechanical, Electrical, Industrial, or Manufacturing Engineering with a minimum of 4 years of industry experience., • Experience with Design for Manufacturability (DFM) of electronics hardware., • Knowledge of industry standards such as IPC-A-610 and J-STD-001., • Experience with change management, nonconformance documentation, root cause analysis, corrective action systems, and acceptance criteria., • Experience with cost analysis, managing suppliers, and configuration management., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Statistical process control., • Experience in aerospace or other high-reliability industries., • Proficiency with PLM and ERP software., • Proficiency in AS9100/ISO9001 quality management system requirements., • Proficiency in lean manufacturing methodologies.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal Component Engineer I to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge electronics for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be a key member of our product development team, leading the parts and component selection, qualification, failure root-cause analysis, standardization, vendor evaluations, and performance verification efforts. The ideal candidate is experienced in EEE components engineering for commercial space applications. Qualified candidates will have ample growth opportunities, with the potential to build our company and processes through technical leadership roles or broader functional management roles. JOB DUTIES AND RESPONSIBILITIES • Act as CesiumAstro’s technical representative with customers to define testing and qualification requirements for all EEE parts., • Work all aspects of high-reliability EEE parts selection, standardization, qualification, and performance verification on a growing team., • Develop a roadmap for state-of-the-art components, working with the engineering design team for an effective product upgrade strategy while balancing cost and schedule, • Provide EEE part expertise and support on aerospace programs, reviewing customer documents and aligning their needs with the company’s product lines., • Evaluate components for compliance to industry requirements such EEE-INST-002, AEC, TOR, JEDEC, and others., • Author parts plans and process definition documents for internal and external use., • Write and review Engineering Change Orders (ECOs) to component-level procurement and test control documents., • Develop process improvements for streamlined component-level ECOs review and adjudication., • Experience building relationships with space part suppliers., • Review screening and test data received from manufacturers and test laboratories for compliance to specifications, purchase order requirements, and program contracts., • Interface internally with design engineers, reliability engineers, and quality engineers in support of risk mitigation and product development review efforts., • Prepare Non-Standard Parts Approval Requests (NSPARs) and Source Control Drawings (SCDs)., • Perform bill-of-materials cost analysis, components research and obsolescence mitigation, and supplier audits.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree or higher in Electrical Engineering or a related discipline., • Minimum 8 years of relevant prior experience as a component engineer., • Knowledge of component selection, qualification, screening and derating for military and aerospace., • Familiar with management of new part requests, part objects, and part attributes in a Product Lifecycle Management System, • Direct experience with parts plans for high-volume satellite constellations, evaluating parts screening and qualification in the context of high-volume constellation performance., • Excellent communication and interpersonal skills., • Strong desire to change an industry and disrupt incumbent players., • Sense of urgency, with the ability to work independently under agile development timelines., • Willingness to learn and work in both a support capacity and as a lead on differing functions.PREFERRED EXPERIENCE, • Demonstrated technical leadership in component engineering by mentoring junior component engineers and educating designers within your area of expertise., • Participate in failure analysis investigations ofdefective components and author failure analysis reports as required., • Knowledge and working familiarity with key reliability analyses for space mission hardware (prediction, derating, FMECA, WCA)., • Experience with radiation effects on electronics (TID, SEE) and common mitigation techniques., • Knowledge and working familiarity with key materials and process requirements for tin whisker mitigation, • Experience with components in ground or air applications, • Knowledge of EEE component manufacturing processes.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal Power Electronics Engineer I to join our growing satellite communication (SATCOM) terminal development team. In this position, you will contribute across the entire development lifecycle of next-generation power electronics hardware for military and commercial power systems—from leading the definition of power system architectures and trade studies to detailed circuit design, simulation, printed circuit board (PCB) layout, verification and integration testing, production transition, and manufacturing support. JOB DUTIES AND RESPONSIBILITIES • Lead the development of power system architectures and derive power subsystem requirements, • Design DC-DC power converters, power supplies, and power distribution systems ranging from a few watts to more than 20 kW of power in the 0.8 V to 400 V range, • Design single-phase and three-phase AC-DC power supplies and power distribution systems ranging from a few kilowatts to more than 20 kW, • Perform comprehensive analysis of AC-DC and DC-DC power supplies including worst-case circuit analysis (WCA), stress analysis, small signal modeling analysis, failure modes and effects analysis (FMEA), reliability analysis, and power integrity analysis, • Develop design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans for power converters and power supplies, • Lead board bring-up and design verification testing of analog and power electronics circuits, • Lead system integration, qualification campaigns, and production release of power supply modules and power systems, • Mentor younger engineers and foster knowledge sharing, • Lead a small team of power electronics engineers to drive project execution JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree or higher in Electrical Engineering from an accredited university., • Minimum of 9 years of experience designing analog and power electronics, • Experience working with electrical power systems and subsystems, including developing power architecture and power requirements, performing trade studies for size, weight, power, and cost optimization (SWAP-C), selecting power converter topologies, and defining power management and control blocks, • Experience designing, testing and qualifying single-phase and three-phase off-line AC-DC power supplies, and DC-DC power supplies for industrial, airborne, or military systems, • Knowledge of control theory and stability of power electronics, including experience characterizing control loops and impedances in the laboratory, • Experience designing power filters for low noise outputs and for power line electromagnetic compatibility (EMC), • Experience developing design verification test plans, requirement compliance matrices, system integration and qualification test plans, and production acceptance test plans, • Experience performing worst-case circuit analysis (WCA), stress analysis, failure modes and effects analysis (FMEA), and reliability analysis for power supplies, • Extensive hands-on experience with testing and troubleshooting electronics and power converters using laboratory instruments such as oscilloscopes, impedance analyzers, spectrum analyzers, electronic loads, and signal generators, • Experience with analysis and simulation tools such as SPICE, LTSPICE, SIMetrix/SIMPLIS, PLECS, Simulink, MATLAB, MathCAD, ANSYS Q3D and SiWave, or HyperLynx, • Experience with isolation and grounding, failure mode effects analysis and fault tolerant design, and thermal management of power electronics, • Experience designing and testing power electronics units to meet industry standards and requirements in the automotive, industrial, aircraft, or military markets (e.g., FCC, CISPR, UL safety standards, ECSS, NASA, MIL standards), • Excellent written and verbal communication skills PREFERRED EXPERIENCE, • Experience designing and testing isolated and non-isolated DC-DC power converters (e.g. discrete linear regulators, Buck, Boost, Buck-boost, Flyback, Forward), • Experience designing or specifying custom power magnetics for power supplies and power line filters, • Knowledge of power stage design and control methods for power factor correction (PFC) converters and active rectifiers, • Experience generating statements of work and requirements for external vendors, vendor selection, and vendor management for power supply and power system rack developments, • Experience with electronics schematic capture and printed circuit board (PCB) layout tools such as Altium, OrCAD, Allegro or Xpedition, • Experience running board-level power integrity simulation using tools such as Ansys SiWave, or HyperLynx, • Knowledge of soft switching and resonant power converter topologies (e.g. LLC, CLLC, series resonant, phase shifted full bridge, dual active bridge, etc.)

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We’re looking for builders, problem-solvers, and system thinkers. We are seeking a Senior Communication System Integration and Verification Engineer I to support the end-to-end integration of communication functions for our communication payload products. This highly technical role combines deep domain expertise in communication systems with hands-on integration and test execution. You will play a critical role in the architecture definition, execution, and delivery of our communication payload products—contributing to requirement definitions, algorithm development, Special Test Equipment (STE) design, verification, and final sell-off. This position is ideal for an engineer passionate about solving complex integration challenges and advancing the standard of excellence in payload delivery.JOB DUTIES AND RESPONSIBILITIES • Responsible for lab and equipment management and guiding key equipment purchase decisions., • Core day-to-day responsibilities include collaborating with design and test engineering teams to develop test requirements, mapping requirements to reusable test architectures and procedures, architecting RF and digital test systems, implementing test plans and procedures, executing verification/validation tests, and logging and presenting results to key stakeholders., • Work closely with design teams to verify and evaluate expected system level performance, • Ability to draw insightful conclusions from test results and troubleshoot system level anomalies for the purpose of providing feedback to design and verification teams, • Ability to adapt test plans based on capabilities of HW/SW delivered by the design teams, compatibility with third-party systems, customer-furnished equipment (CFE), subsystem vendors and availability of the testing equipment., • Support the definition and development of Special Test Equipment (STE) required to verify communications payloads, and coordinate with Test Product teams for execution., • Represent the payload integration effort in program reviews, technical interchange meetings (TIMs), and formal sell-off events as a technical contributor., • Working in a startup environment and are passionate about developing critical test systems for leading-edge satellite communication systems.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) degree in Electrical Engineering, Communications Engineering, or related technical field, • 4+ years of experience in communications systems engineering, payload integration, or systems development in aerospace, defense, or space environments., • Hands-on experience with lab instruments such as digital oscilloscopes, multimeters, source measurement units, RF signal generators, spectrum analyzers, vector network analyzers, bit-error rate (BER) testers and vector signal analyzers., • Hands-on experience in developing hardware and measurement abstraction layers, and test automation setups using basic scripting and SW development with common programming/scripting languages (Python, MATLAB, C/C++, etc.)., • Understanding of RF and mixed-signal hardware (e.g. amplifiers, filters, ADCs/DACs, antennas) and its effect on test design., • Proficient in performing RF measurements and data analysis including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, linearity, EVM and group delay., • Proven expertise in troubleshooting, fault isolation, and test execution skills at the unit, subsystem, and system level., • Hands-on experience with designing test setups in anechoic chambers for antenna systems evaluation. PREFERRED EXPERIENCE, • Master of Science (MS) or higher degree in Electrical Engineering, Communications Engineering, or related technical field, • Knowledge of satellite and wireless communication systems and protocols, • Familiarity with phased array antenna architectures and array calibration

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES • Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements., • Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies., • Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine)., • Documentation of inspection activities using electronic information systems, written logs, and labels., • Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes., • Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies., • Assist in data analysis and reporting of department metrics as required., • Assist with the continuous improvement initiatives., • Assist in the resolution of audit findings, observations, and recommendations., • Assist with the control and disposition of non-conforming material (MRB)., • Drive scheduling of day-to-day processes; ensure timely and accurate turnaround., • Other QC duties as assigned.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Associate degree in a technical field preferred. H.S. Diploma or equivalent required., • Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required., • Experience with AS9100 or ISO9001 Quality Management Systems., • Experience with microscopic visual inspection., • IPC-A-610 / J-STD-001 certification., • Experience with ERP and PLM software systems., • Proficiency with reading engineering documents, CAD drawings, and detailed work instructions., • Strong digital, written, and verbal communication skills., • Strong attention to detail and ability to follow procedures., • Strong interpersonal skills and ability to work with others in a positive and collaborative manner.PREFERRED EXPERIENCE

Job DescriptionAs our M.E.P. Coordinator, you will lead the mechanical, electrical, plumbing, and fire protection systems on construction projects from preconstruction through construction and post‑construction. You will also bring expertise in building controls and the commissioning processes to ensure system performance and project readiness. Successful team members are highly knowledgeable in constructability and compliance, skilled in identifying and solving complex MEP challenges, and demonstrates exceptional attention to detail, organization, communication, and leadership throughout every phase of the project.Your Skills • MEP Systems Oversight & Technical Expertise - Lead the resolution of design, code, and constructability issues while ensuring all MEP systems meet required standards and sustainability goals., • Coordination & Communication - Communicate effectively with all project stakeholders and lead coordination meetings to align expectations and resolve MEP issues., • BIM, Scheduling & Planning - Oversee BIM coordination and provide accurate MEP schedule input to keep modeling, planning, inspections, and commissioning aligned with the overall project timeline., • Procurement, Submittals & Field Oversight - Manage submittals, equipment procurement, and field installation to ensure MEP work aligns with approved drawings and project requirements., • Cost, Quality & Risk Management - Monitor MEP costs, implement quality control processes, and proactively manage risks related to code compliance, safety, and system performance., • Commissioning, Closeout & Continuous Improvement - Lead commissioning and closeout of MEP systems while improving coordination processes and sharing lessons learned across project teams., • Process Development & Training - Develop and refine MEP coordination workflows and provide training to elevate team knowledge and performance., • Safety & Risk Management - Enforce safety standards and identify risks related to MEP systems, codes, and project conditions to ensure safe and compliant installation.Your Background, • Proven construction management experience, specifically in HVAC, electrical, fire protection and plumbing systems., • Employee ownership, • Competitive pay, • Profit sharing & project incentives, • Vehicle allowance & phone reimbursement, • Career development and continuing education assistance, • Generous Paid Time Off (PTO), • 401(k) with 6% match (traditional and Roth), • Medical, dental and vision insurance with free eligible medications through Rx ‘n Go, • Health Savings Account (HSA) with SpawGlass contribution

Job Description Phasor Engineering LLC is seeking a Professional Land Surveyor for a permanent position within the southern United States to help with our growing operations there. We have a number of large projects in the western United States, and we are well positioned to continue to grow. We are looking for additional Land Surveyors to support our current projects and support growth. The candidate must be licensed in Texas and Louisiana and willing to get licensed in additional states. All costs associated with obtaining additional licenses will be paid by Phasor. Work-from-home or a hybrid work scenario will be explored with applicants. This is a professional position so all the work responsibilities and conditions can’t be completely explored in a typical job advertisement write-up. We would like to meet with any interesting candidates to explore the opportunity and ensure that Phasor is the right fit for you. We are flexible on the working conditions for the right candidate. As a condition of employment, successful applicants agrees to undergo a Backcheck screening, which includes identity verification and a criminal background check. Responsibilities • Managing all aspects of project execution, • The Project/Regional Manager, • Must establish communication protocols for the project which will include:, • Identification of Client or Phasor interest holders and decision makers, • Change management, • Information dissemination routes and procedures, • Systematic processes for project data and reporting, • Is responsible for project financials and must establish cost controls and perform periodic reviews to identify any risks, • Must liaise with Phasor personnel on a project to understand all project requirements including scheduling, cost, technical and logistic considerations., • Will manage any sub-contractors that are performing Geomatics work on a project, • Will manage shift schedules, accommodations and mobilization requirements for Crew Chiefs and Survey Assistants unless this work has been delegated to a Field Coordinator., • Must participate in division-level meetings to coordinate the Crew Allocation between projects Benefits · Competitive compensation · Comprehensive benefits coverage including health insurance and 401K, vacation & personal days · Growth and advancement opportunities · Paid professional dues · Use of new leading-edge technology and equipment · Large scale engineering and construction projects and a fast-paced working environment About Us Phasor Engineering LLC is a subsidiary of Quanta Services, Inc which is the leading specialty contractor with the largest and highly trained skilled workforce in North America – providing fully integrated infrastructure solutions for the electric power, underground utility and communications industries. The Geomatics Division of Phasor Engineering provides the spatial services required to build, maintain, map and monitor electrical infrastructure. We apply the latest geomatics technology, including GPS systems, terrestrial scanners, drones, high precision optical and infrared sensors, as well as helicopter based LiDAR. Our focus on power infrastructure projects has made is experts in the field. Phasor Geomatics’ team includes highly qualified engineers and technicians who have a wide range of experience on power infrastructure projects: large transmission line builds, renewable energy projects, remote inspections, pipeline projects and much more. We get to apply our knowledge daily and continuously develop innovation ways to improve efficiency and client values. Phasor Engineering is an equal opportunity employer, committed to a diverse workforce. We offer a competitive salary and a complete range of employee benefits. Please forward resume and cover letter in confidence by applying directly to this job posting. We thank all applicants for their interest. All applications will be reviewed to determine which candidates' education and experience best meets the needs of the position. Only individuals selected for interviews will be contacted. AI is not used to screen or assess candidates. The role posted is for an active vacancy we have in Phasor but applications may also be used for future positions. Salary variations depend on factors such as qualifications, relevant years of experience, and current market conditions specific to the role. Salary range: $115,000-$165,000 (excepted yearly earnings may vary) Benefits • Dental care, • Disability insurance, • Employee assistance program, • Extended health care, • Life insurance, • On-site parking, • Paid time off, • 401K, • Vision care, • Wellness program

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin?Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Project Executive is responsible for providing leadership and oversight for the strategic as well as the day-to-day operations for all Construction, Project Management and Project Administration activities. Has overall responsibility for maintaining budgets, timelines and profitability for assigned projects. Assists in the development and implementation of corporate policies and procedures to achieve established corporate goals and support the corporate mission statement. WHAT YOU'LL DO: * Provide operational oversight in the areas of client management, procedural issues, financial and reporting issues, and workforce planning and analysis. * Actively manage the workload, professional development, and client development skills of project management staff. * Promote positive customer relations by dealing professionally and fairly with all contractors, subcontractors and vendors, and continually instilling this philosophy in the project team with regard to safety, quality, customer service and profitability. * Initiate, execute, and document a quality job start-up meeting for your project(s). * Manage and maintain ”Strategic Partner” subcontractor and vendor relationships, including verification of timely payment. * Perform monthly project reviews with project teams to ensure adherence to schedules, quality of work, safety, administration and profitability. * Analyze available and qualified personnel and make specific project assignments to meet project needs. * Assist the PMs and Superintendents with resolution of specific issues and requests. * Manage customer relations and change order negotiations. * Represent company/project in meetings with client, subcontractors, etc. * Represent the Company at project Senior Management meetings. * Schedule, facilitate, and document project close out meetings. Verify project data sheets and photos (with client's permission) for all completed projects. * The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties will be assigned based on the position's role within the business unit. WHAT YOU'LL NEED TO BE SUCCESSFUL: * Must possess the utmost of personal integrity and have the ability to create and lead an organization culture of collaboration, both internally and externally, in order to maintain the superior reputation of firm * Extensive knowledge of safety protocols and procedures * Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Accubid and Oracle experience preferred * Ability to understand and follow standard operating policies and procedures. * Ability to prioritize and manage multiple tasks, changing priorities as necessary * Ability to work under time pressure and adapt to changing requirements with a positive attitude * Effective oral and written communication skills as required for the position * Ability to be self-motivated, proactive and an effective team player * Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: * Bachelor's degree in construction management civil engineering, Structural Engineering or other related field * PE license a plus * Minimum 10 years' experience in project management, preferably in electrical construction. Knowledge of construction technology, scheduling, equipment and methods required * Proven experience mentoring and managing others * Business development/heavy client interaction a plus * Can be a combination of education, training and relevant experience TRAVEL: * 10 - 25% WORKING CONDITIONS: * General work environment - This position is performed primarily on active construction sites. Activity includes sitting for extended periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning. * Noise level is usually low to medium; it can be loud on the jobsite. * We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. * Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits * ESOP - Employee Stock Ownership * 401k * Annual bonus program based upon performance, profitability, and achievement * 17 PTO days per year plus 10 paid holidays * Medical, Dental, Vision Insurance * Term Life, AD&D Insurance, and Voluntary Life Insurance * Disability Income Protection Insurance * Pre-tax Flexible Spending Plans (Health and Dependent Care) * Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Founded in 1908, Flintco now employs more than 750 people in 10 cities serving clients in healthcare, renewable energy, education, hospitality, sports and industrial. Flintco also self-performs concrete, steel erection and excavation. Nothing matters more to us than the quality and growth of our people. Our teams are smart, humble and disciplined. Flintco is recognized for its commitment to safety and quality, using Lean principles as a guide to continuous improvement. The five guiding principles of our Ethos are: Safety, Integrity, Quality, Accountability and Honesty. We live it every day. Job Summary The Project Director oversees the day-to-day operations of renewable energy projects, ensuring efficiency, safety, and compliance. This role involves strategic planning, performance management, budget oversight, and team leadership. Responsibilities include managing relationships with vendors and contractors, monitoring project performance, and implementing new technologies. The Project Director contributes to business development and the ongoing development of the Company’s capability to compete in the marketplace. The Project Director works closely with and communicates openly with the Vice President / Market Leader to ensure the success of the business unit. The Project Director must be able to travel to projects approximately 50% of the time. Essential Duties and Responsibilities All duties and responsibilities include the following, however, other duties may be assigned. To perform in this position successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Supervise Engineering, Procurement, & Construction (EPC) contractors, ensuring contractual, safety, quality, schedule, and cost adherence., • Lead and support self-perform construction scopes including civil, electrical, mechanical, and related field operations., • Oversee multiple large-scale projects concurrently, integrating Electrical, Civil, Mechanical, and Water scopes., • Manage project P&L, feasibility, budgeting, and financial offers, ensuring cost-effectiveness., • Ensure adherence to safety standards (OSHA), environmental regulations, permits, and quality benchmarks., • Champion a strong safety culture and ensure strict adherence to all company, client, and regulatory safety requirements, • Provide expertise in Medium/High Voltage systems, grid interconnections, PV, BESS, or Wind., • Secure permits, monitor adherence to local/national laws, ensure environmental standards are met, and manage interconnection requirements with utilities., • Oversee implementation of project quality control programs to ensure work meets contractual, code, and engineering standards, • Ensure full compliance with prevailing wage, certified payroll, and labor compliance requirements (federal, state, and local), • Oversee compliance with Davis-Bacon, project labor agreements (PLAs), and other labor-related contractual obligations as applicable, • Coordinate with compliance, HR, and payroll teams to ensure accurate reporting and documentation, • Identify, assess, and mitigate risks (technical, financial, environmental, regulatory)., • Manage budgets, forecasts, and financial reporting, and ensuring effective cost management and resource utilization. Review of project bids, contract development and negotiation, invoice review and approval, and timely collection of accounts receivables., • Develop and implement comprehensive QA/QC programs, ensuring compliance with specifications, standards and regulations., • Oversee the full project lifecycle, from planning and execution to closeout, ensuring projects are delivered on time, within budget, and to the required quality standards. • Assist with business development efforts, including expanding services with existing clients and pursuing new business opportunities. • Ensure work complies with internal standards, customer specifications, and regulatory requirements, minimizing rework and claims., • Build and maintain strong relationships with clients, serving as a primary point of contact for project-related issues., • Support and interface with business unit management in reviewing the preparation of proposals and contracts in areas specific to cost and benchmark to previous proposals with consistent deliverables., • Manage personnel and provide an environment for the development and professional advancement of staff members, including training and development opportunities, and timely performance feedback. Oversee, lead, and direct project managers, field personnel & support staff Knowledge/Skills/Ability Ability to model the Flintco Ethos by representing to all people a level of integrity, pride, enthusiasm and competence that encourages the highest level of performance and morale; ability to communicate effectively, both orally and in writing, especially in providing direction to employees and communicating with architects, clients, subcontractors and third parties; ability to perform all duties and operational procedures utilizing company information technology systems; ability to understand and manage all aspects of construction contracting and operations; has a comprehensive knowledge of construction documents, roles & responsibilities of all parties, means & methods, bonds & insurance and risk management; ability to accurately forecast monthly project status reports. Advanced knowledge of the construction industry and specific client market required. Ability to communicate effectively, both orally and writing, especially in providing written and oral instructions to employees and in communicating with clients, architects, and subcontractors. Must have organizational leadership skills, communications skills, and analytical skills. Must have ability to read and comprehend technical and statistical data and interpret legal documents. Ability to lead large groups of personnel and to accomplish desired results through subordinate levels of management. Education Bachelor’s degree in Electrical, Mechanical or Civil Engineering or an equivalent combination of education and experience. Experience Extensive experience managing and directing a team, 10 or more years of experience using Utility Scale, commercial solar design, strong knowledge of electrical principles, low and medium voltage distribution design, protection and relaying design, SCADA design; familiar with a variety of solar equipment and balance of systems for the proper design of PV systems; proficient in Helioscope, PV Syst, AutoCAD 2D and 3D or Revit, proficient in MS Office Suite; excellent communication, strategic thinking and analytical skills, impeccable attention to detail, strong sense of ownership, excellent time management skills; able to work independently with minimal supervision; able and willing to collaborate with the team. Should have experience with integrating engineering modeling with online MRP/ERP systems to create and validate sock-keeping units (SKU's), writing detailed and accurate support documentation (e.g., QC checklist, install guide, equipment commissioning guide), create design and permitting packages; participation in the development, design, QA/QC and implementation of PV systems, collaborate with utility engineers in the interconnection process Certificates, Licenses, Registrations None required Physical Requirements • Physical demands are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this position, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear., • The employee is occasionally required to sit and smell., • The employee must occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Occasionally, especially when managing multiple projects and during problematic opening and/or closing phases of projects, mental stress can be taxing. The office provides a safe and healthy work environment, is adequately heated and cooled, is free from exposure and extreme conditions, has appropriate lighting and office furnishings, and is smoke-free and drug-free. While performing the duties of this • NOTE – Where allowed, employees who work in positions classified as “safety-sensitive” can be disciplined if they test positive for marijuana or its metabolites, even if they have a valid state medical marijuana license. In addition, Flintco may also refuse to hire applicants for safety-sensitive jobs who test positive for marijuana as part of a pre-employment drug test, even if those applicants can produce a valid medical marijuana patient license.

Job DescriptionDescription: MMBR Systems, LLC, an Integrated Water Services (IWS) company, is seeking a skilled and highly motivated Manager, Technical Services, who will be responsible for various tasks related to the delivery and or support of membrane bioreactor wastewater treatment solutions. Activities may include equipment/system installation, delivery, commissioning, operator training, warranty commitments, and product development. The Manager will self-perform work as needed but will also supervise internal/external resources. You and your team will be focused on customer support, issue resolution, and continuous improvement. Responsibilities and Expectations: • Work with contractors on delivering, installing, commissioning, and decommissioning wastewater (MBR) systems and equipment., • Manage the on-time delivery of modular wastewater treatment solutions., • Work with clients on troubleshooting and issue resolution., • Document activities and services performed., • Bachelor’s degree in engineering plus 6 plus years of Technical Services experience, or 8+ years of relevant work experience, • 3+ years experience working with MBR technology., • Familiar with water and wastewater plant technology and controls, • Able to troubleshoot water and wastewater plant issues including mechanical, biological, and electronic systems., • Ability to read and interpret mechanical, civil, and schematic drawings., • Experience with manufacturing, fabrication, assembly, and field erection methods and practices., • Proficiency with electrical control systems, control panels, and PLC programming., • Strong customer service and issue resolution skills., • Proficient in Procore, Bluebeam, Raken, and Microsoft Office, and bring extensive hands-on knowledge of equipment operation, layout verification, and inspection coordination. Action Oriented, Problem Solving, Functional/Technical Skills, Innovation Management, Interpersonal Savvy, Perspective, Effective Communication, and Conflict Management. ABILITITES • Able to work under pressure., • Resolve problems in a quick and effective manner., • Solid written and verbal communication abilities., • Travel as needed to job sites (>50%)., • Stand, bend, stoop, reach and climb throughout the day., • Competitive compensation, • Comprehensive benefits package (medical, dental, vision, STD, LTD), • Paid time off (PTO) to recharge and explore IWS is an equal opportunity employer. We do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, or sexual orientation.

Job Description Thermal Works LLC has an exciting opportunity for a Project Manager to join our team, working directly with the Director of Project Management and the regional Director of Operations, serving as the central point of accountability for execution performance for multiple projects in a region, delivering ThermalWorks' high-efficiency cooling systems for data centers. The Project Manager needs to be agile, professional, trustworthy with confidential information, and comfortable in a rapidly changing environment. The ideal candidate will understand the unique challenges of mission-critical environments, be organized, proactive, and capable of working independently while knowing how to navigate complex stakeholder environments for highly technical design and construction projects, enforce high standards, drive effective execution, and build respect through competence, presence, and consistent leadership. ThermalWorks values efficiency and strives to maintain smooth operations. Our primary focus is on providing an integrated cooling system for data centers and commercial buildings that dramatically reduces the energy demand, water consumption and cost of cooling. It transforms the economics and eco-metrics of commercial cooling with zero water solutions that outperform air- and water-cooled systems in any climate. ThermalWorks solutions are sustainable and cutting-edge. For that reason, we are highly selective about the people we bring on board because our work depends on it. Change and progress happen quickly, and we must be able to trust one another to be honest, communicative, reliable and self-motivated. We seek ultra-creatives and superstar performers with a sense of humility and a hunger to make a positive impact in the world. We offer flexibility and endless growth opportunities to those who can harness their skills and talents and identify how and where to use them to add value. ThermalWorks is one of several "inspired infrastructure" companies that work collaboratively under our parent company, Endeavour Energy, LLC. At the heart of this ecosystem is a diverse group of bright, passionate, dedicated people, working together to make a real difference for people and the planet. ThermalWorks is looking for someone to join our team to help us move the needle toward sustainable change. Are you ready to join the journey? Key ResponsibilitiesInclude but are not limited to: • Oversee the full lifecycle of project delivery, from pre-construction planning to turnover, with a strong focus on schedule discipline, budget adherence, safety, and quality standards., • Build strong working relationships with engineering, commissioning, service, and manufacturing teams to maintain cross-functional alignment and solve technical problems., • Communicate with senior management, clients, and regulatory agencies., • Enforce adherence to company processes, startup requirements, and commissioning readiness., • Conduct inspections and audits to ensure optimal performance, safety, and quality standards, ensuring compliance with local codes, standards, and regulations., • Prepare and submit project plans and budgets. Maintain cost control and be fully accountable for project financial performance., • Ensure alignment between field conditions and design intent, leveraging your understanding of mechanical, electrical, and controls systems., • 25% travel required.Skills & RequirementsEducation / Experience, • Bachelor's in Mechanical, Electrical, Industrial Engineering, • 7+ years of project leadership experience, with 4+ years in mission-critical infrastructure or data center delivery environments.Specific Skills / Abilities, • Demonstrated success managing complex projects in a mission critical environment., • Solid working knowledge of HVAC, hydronic systems, electrical distribution, and controls integration., • Experience with commissioning oversight, Level 3–5 testing, and integrated system delivery., • Proven ability to earn the respect of both technical teams and clients through competence, consistency, and leadership., • Strong organizational, communication, and effective reporting skills., • Willingness to travel as needed to support regional deployment efforts., • Background in data center cooling systems, industrial MEP installations, or OEM equipment deployment., • Familiarity with redundant systems (A/B loops, N+1/N+2) and commissioning strategies., • Experience working in or with hyperscale environments., • MSOffice applications (i.e., Outlook, Word, Excel, PowerPoint, Teams, SharePoint)., • Proven ability to lead cross-functional teams and drive results while maintaining strong relationships with stakeholders at all levels., • Excellent at setting priorities and managing multiple projects with competing deadlines with attention to detail and an openness to new ideas and procedures., • Superior written and verbal communication skills, with the ability to articulate complex ideas clearly and effectively to both technical and non-technical audiences., • Ability to think critically and strategically, with strong problem-solving skills. Today, we're deploying solutions that are immediately scalable and profitable, including EV charging, data center cooling and waste to fuel systems. As we look to the future, Endeavour intends to remain at the forefront of innovation, taking on grander challenges based on the needs of our clients and of local economies. We hope that our Sustainable Habitat for Innovation towards a Purpose (SHIP) will be a model that inspires people and businesses to #jointhejourney. Together we can combine the best of what technology and the natural world can offer to ensure a regenerative/sustainable world for generations to come. Position: Project Manager Full-Time or Part-Time: Full-Time Reports to: Director of Project Management Location: United States (Remote) Preferred near Bismarck, ND Contact:

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior Program Manager to our team. If you enjoy working in a startup environment and managing multiple fast paced projects at once, we would like to hear from you. In this position, you will be responsible for program performance and day-to-day execution for a large customer subsystem or a small to medium sized payload, including concept development, implementation, production, modification, integration and test, and delivery. You will be the single point of contact for customer interactions including program management reviews, customer bi-weekly reviews, and major program reviews. This position is expected to be able to manage multiple customers. This position works collaboratively with all functional organizations at CesiumAstro to ensure the success of the program using risk -bsaed decision making in guiding decisions to meet program objectives. A successful candidate understands how to effectively use program and engineering metrics to make data driven decisions. You will serve as the primary program leader for all activities, with responsibilities for cost, schedule, and adherence to technical performance requirements. The Senior Program Manager will establish program management baselines (integrated master plans and resource loaded schedules) to task the team, measures program performance, and monitors progress to generate latest revised estimates and estimates to completion. The Senior Program Manager will provide these inputs to customers, CesiumAstro leadership, and internal finance teams for revenue recognition. This position will assist the Director of Programs in improving standard processes, and implementing best practices for consistency across the Space Payloads portfolio of programs. As a senior member of the program team, you may help in hiring and mentorship of program engineers. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Minimum of 12-15 years of Program Management or Subcontract Management Experience., • Bachelor of Science (BS) or Master of Science (MS) degree in a relevant engineering field (Electrical Engineering, Mechanical Engineering, Systems Engineering, etc.) from an accredited university or institution., • Experience in the aerospace industry as a system or design engineer., • Develop and coordinate program requirements across product lines and with multiple subcontractors, • Familiarity with RF, communication, or satellite systems., • Experience managing cross functional and decentralized teams., • Relevant CAM, risk management, EVMS, and risk based assessment experience., • Experience developing work break down structures, integrated master plans, and integrated master schedules., • Experience managing programs with dynamic and multi-project interdependencies., • Return-To-Green experience on one or more programs., • Experience in NRE development programs., • Excellent organizational skills., • Excellent written and verbal communication skills., • Must be able to work in a highly collaborative, fast-paced environment, • Experience working with government/military customers.PREFERRED EXPERIENCE, • Experience working with proliferated architectures, • Experience in DoD Acquisition Process.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking to add a Program Manager to our team. If you enjoy working in a startup environment, and managing multiple fast paced projects at once, we would like to hear from you. In this position, you will be responsible for program performance and day-to-day execution for major components within a large system or a component production program with multiple deliveries, including concept development, implementation, production, modification, integration and test, and delivery. You will be the single point of contact for customer interactions including program management reviews, customer bi-weekly reviews, and major program reviews. This position works collaboratively with all functional organizations at CesiumAstro to ensure the success of the program using risk -based decision making in guiding decisions to meet program objectives. You will serve as the primary program leader for all activities, with responsibilities for cost, schedule, and adherence to technical performance requirements. The Program Manager will establish program management baselines (integrated master plans and resource loaded schedules) to task the team, measures program performance, and monitors progress to generate latest revised estimates and estimates to completion. The Program Manager will provide these inputs to customers, CesiumAstro leadership, and internal finance teams for revenue recognition. A successful candidate understands how to effectively use program and engineering metrics to make data driven decisions. Reporting to the Director of Programs, this position will support improving standard processes & practices for consistency across the Space Payloads portfolio of programs. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Minimum of 5-8 years of industry experience in both systems or design engineering and program/project roles., • Bachelor of Science (BS) degree in a relevant engineering field (Electrical Engineering, Mechanical Engineering, Systems Engineering, etc.) from an accredited university or institution is required. Master of Science (MS) degree preferred., • Familiarity with RF, communication, or satellite systems., • Coordinate program requirements across the program lifecycle, • Thorough understanding of aerospace systems engineering processes from concept to production. Specifically, understanding of the space system life cycle., • Experience managing cross functional and decentralized teams, and integrating new technologies into the program portfolio., • Relevant CAM, risk management, EVMS, and risk-based assessment experience., • Experience developing work break down structures, integrated master plans, and integrated master schedules., • Experience managing programs with dynamic and multi-project interdependencies., • Excellent organizational skills., • Excellent written and verbal communication skills., • Proficiency in project management tools such as Microsoft Project or Jira., • Must be able to work in a highly collaborative, fast-paced environment, • Experience working with government customers.PREFERRED EXPERIENCE, • Experience with NASA (GRC, JSC, MSFC) customers, • Experience in DoD Acquisition Process., • Return-To-Green experience on one or more programs., • Experience in NRE development programs desired.

Job Description Join the Origis Energy Team! Origis Energy is accelerating the transition to a carbon-free future by Reimagining ZeroSM. As one of America's leading renewable energy and decarbonization solution platforms, the company continues to expand and reimagine its contribution to the world's net-zero goals. Origis Energy puts customers first to deploy a wide range of sustainable solutions for grid power generation, performance optimization, and long-term operation of solar and energy storage plants across the U.S. Founded in 2008, Origis Energy is headquartered in Miami, FL. The Origis team, regarded as one of the leading developers in the U.S., is committed to living five core values in all interactions both with each other and external stakeholders: Solve for Tomorrow. A role with Origis Energy puts you at the forefront of the transition to clean energy. Are you ready to bring new ideas? Do you exist to find solutions? That's how we revolutionize energy and build a carbon-free future - through unmatched service and relentless innovation. Rise Together. To succeed here, you'll collaborate with others and work as one team, across various teams including solar and energy storage development, financing, engineering, procurement and construction (EPC) and operations, maintenance and asset management. Are you open to diverse perspectives and prepared to work seamlessly across disciplines to reach our collective goals? Perform at Peak. We're seeking team members who bring authentic energy and passion to every task. How can you use your natural strengths, genuine optimism and intelligence to make your greatest contributions to Origis? Inspire & Grow. The Origis team is comprised of knowledgeable, passionate solar and energy storage experts who bring deep expertise and solution-driven thinking to clients. A successful Origis team member encourages others and sets a high bar for growth. We have a culture of continuous improvement because each team member takes the role of both learner and mentor. Be Resilient. The spirit in which we tackle the energy challenges and objectives of our clients means we consistently stretch for the extra mile. We all take initiative and remain adaptable, overcoming obstacles by prioritizing respect. Position Description Origis Services, LLC is a rapidly expanding Operations and Maintenance provider for solar and energy storage sites in the United States. Our asset portfolio continues to increase at a near exponential rate, with a mixture of Owner developed and constructed sites and third-party sites contracted, or already under management. Origis Service, LLC is looking to fulfill a Remote Operations Center (ROC) Operator role in Austin, Texas and reporting to the ROC Supervisor. Key Responsibilities: • Monitors performance of solar power plants and BESS/storage systems, • Rotating shifts for constant 24/7 monitoring and evaluation of system conditions, • Coordination of planned and emergency maintenance from ROC, • Recognize abnormal system operating conditions and respond timely to field upset conditions and alarms, • Accountable for safe, reliable, and compliant daily operations for all sites, • Complies with applicable NERC standards and procedures, • Ability to assess risk and resolve problems in a timely manner, • Report, log, analyze and maintain accurate records of system conditions, • Performs other duties as assigned Preferred Qualifications: • Two-year college degree in Electrical Technology, other engineering related degree, or 1-3 years relevant work experience, • NERC System Operator Certification is a plus, • SCADA systems knowledge, familiarity with ERCOT ISO operating requirements preferred, • Experience demonstrating skill handling multiple tasks simultaneously at various stages of completion, • Demonstrate performance toward operational excellence, • Ability to communicate detailed information accurately to internal and external customers, • Remote work is not available for this position, • This position requires mandatory overtime outside of the embedded shift work as needed, • Must be willing to work all shifts, weekends and holidays on a rotating 12-hour basis; operating on a DuPont schedule., • Ability to pass a background check and drug screening Location Austin, TX Job Level Operator Origis Energy is an Equal Opportunity Employer (EOC). All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. We are committed to fostering, cultivating and preserving a culture of diversity, equity and inclusion. We embrace and encourage our employees' differences as that is what makes our employees unique. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. More information is available here. California Applicants: Please review our California Privacy Policy and Notice at Collection. Request for Support or Accommodations: As part of our effort to provide equal opportunity to qualified disabled veterans and individuals with disabilities, we are happy to offer support and special accommodations in order for you to successfully reach us with your interest. Please reach out to us at if you would like to request help with your application.

Job DescriptionAbout Base Base is America’s next-generation power company. We’re rebuilding the foundation of modern civilization–electricity–by deploying a vast network of distributed batteries that is transforming today’s fragile, centralized grid into a resilient and abundant system. We are engineers, operators, and creatives solving some of the most complex, interdisciplinary challenges of our time. About the Role Base Power Company is seeking a meticulous and knowledgeable Site Surveyor to assess customer site compatibility for battery installations. This role involves detailed analysis of customer-provided photos, collaboration on installation configurations, and ensuring compliance with electrical code requirements. Site Surveyors will also create specialized drawings for non-standard installations and may conduct occasional field site surveys. What You'll Do * Review customer-submitted site photos and documentation to determine installation feasibility and compatibility * Collaborate with customers to clarify site details and finalize installation configurations. * Interpret and apply relevant electrical codes to ensure safe and compliant installations. * Create detailed, specialty drawings for off-nominal or complex installation scenarios. * Document and communicate installation requirements and potential issues to internal teams. * Maintain accurate records of site survey reviews and customer interactions. * Occasionally conduct in-person site surveys to resolve complex issues or verify site conditions. * Provide technical support and guidance to installation teams based on site survey findings. * Identify and suggest improvements to the site survey review process for increased efficiency. What You'll Bring * 2+ years of experience in site survey review, electrical installation, or related technical field. * Strong understanding of electrical codes and installation best practices. * Proficiency in interpreting technical drawings and creating detailed diagrams. * Excellent communication and interpersonal skills for effective customer interaction. * Ability to analyze and interpret visual data from photographs and site documentation. * Experience with solar, battery, or EV charger installations. * Strong problem-solving and critical thinking skills. * Proficient with computer software and documentation tools. About This Team The Site Survey team serves as the technical bridge between a customer’s interest and a fully operational battery installation, ensuring every home we touch is safely equipped for the energy transition. Our mission is to solve the complex puzzle of residential electrical infrastructure by translating fragmented field data and photos into precise, code-compliant installation blueprints. By standardizing the assessment of diverse home environments, we remove the technical friction that typically slows down clean energy adoption, directly accelerating Base’s goal of building a more resilient, software-defined power grid. Joining this team means tackling the high-impact challenge of digitizing the physical world; you aren't just reviewing photos—you are engineering the physical foundation that allows our technology to stabilize the grid and lower energy costs for thousands of households. Our Values * First Principles Thinking: Question assumptions. Principles > rules. * Operate at Base Pace: Focus on what matters, act quickly, and learn by doing. * Give & Get Feedback: Be direct, be humble, and maintain a growth mindset. * Everyone’s an Owner: Follow through on commitments and own results. * Strong Opinions, Loosely Held: Drive clarity and make calls with imperfect information. * Committed to the Mission: Rebuilding the grid is a big challenge. We work hard because we care deeply about the impact we’re creating. We work in-person. It’s not a 9-to-5. We are all-in. * Fun & Optimism Coexist with Grit: Collaboration and celebration coincide with the intensity of building real things. Do the best work of your life at Base.

Job DescriptionAbout Base Base is America’s next-generation power company. We’re rebuilding the foundation of modern civilization–electricity–by deploying a vast network of distributed batteries that is transforming today’s fragile, centralized grid into a resilient and abundant system. We are engineers, operators, and creatives solving some of the most complex, interdisciplinary challenges of our time. About the Role Base Power Company is seeking a meticulous and knowledgeable Site Surveyor to assess customer site compatibility for battery installations. This role involves detailed analysis of customer-provided photos, collaboration on installation configurations, and ensuring compliance with electrical code requirements. Site Surveyors will also create specialized drawings for non-standard installations and may conduct occasional field site surveys. What You'll Do * Review customer-submitted site photos and documentation to determine installation feasibility and compatibility * Collaborate with customers to clarify site details and finalize installation configurations. * Interpret and apply relevant electrical codes to ensure safe and compliant installations. * Create detailed, specialty drawings for off-nominal or complex installation scenarios. * Document and communicate installation requirements and potential issues to internal teams. * Maintain accurate records of site survey reviews and customer interactions. * Occasionally conduct in-person site surveys to resolve complex issues or verify site conditions. * Provide technical support and guidance to installation teams based on site survey findings. * Identify and suggest improvements to the site survey review process for increased efficiency. What You'll Bring * 2+ years of experience in site survey review, electrical installation, or related technical field. * Strong understanding of electrical codes and installation best practices. * Proficiency in interpreting technical drawings and creating detailed diagrams. * Excellent communication and interpersonal skills for effective customer interaction. * Ability to analyze and interpret visual data from photographs and site documentation. * Experience with solar, battery, or EV charger installations. * Strong problem-solving and critical thinking skills. * Proficient with computer software and documentation tools. About This Team The Site Survey team serves as the technical bridge between a customer’s interest and a fully operational battery installation, ensuring every home we touch is safely equipped for the energy transition. Our mission is to solve the complex puzzle of residential electrical infrastructure by translating fragmented field data and photos into precise, code-compliant installation blueprints. By standardizing the assessment of diverse home environments, we remove the technical friction that typically slows down clean energy adoption, directly accelerating Base’s goal of building a more resilient, software-defined power grid. Joining this team means tackling the high-impact challenge of digitizing the physical world; you aren't just reviewing photos—you are engineering the physical foundation that allows our technology to stabilize the grid and lower energy costs for thousands of households. Our Values * First Principles Thinking: Question assumptions. Principles > rules. * Operate at Base Pace: Focus on what matters, act quickly, and learn by doing. * Give & Get Feedback: Be direct, be humble, and maintain a growth mindset. * Everyone’s an Owner: Follow through on commitments and own results. * Strong Opinions, Loosely Held: Drive clarity and make calls with imperfect information. * Committed to the Mission: Rebuilding the grid is a big challenge. We work hard because we care deeply about the impact we’re creating. We work in-person. It’s not a 9-to-5. We are all-in. * Fun & Optimism Coexist with Grit: Collaboration and celebration coincide with the intensity of building real things. Do the best work of your life at Base.

Job Description About Sungrow: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This is a very dynamic and fast-track position reporting to the Field Service Supervisor. The position will be the key member of service team. This position will also be the technical point of the contact person to support sales teams for commercial, industrial and utility-scale businesses. Essential Duties and Responsibilities: • Perform as a lead on more complex field engineering assignments for Battery Storage and PV applications., • Perform pre-commissioning and commissioning of Battery storage systems (AC & DC couple) and PV solar inverters achieving the milestones agreed with utility scale customers, • Perform and/or lead Preventive Maintenance projects as needed, • Perform a variety of engineering assignment involving technology applications involved in the installation, operation, testing and maintenance of central and string solar inverter, • Perform electrical and electronic troubleshooting and testing of solar inverters and its components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed, • Perform and/or troubleshooting in your region assigned to investigate solar plant issues such as DC arrays grid faults, inverter design issues, and utility grid transients, • Provide feedback to the engineering team on possible mechanical and electrical design improvements, • Lead upgrade projects (software and hardware) in the field and interact with customers to explain the technical scope of the project, • Work with customer EMS/SCADA engineers to set-up systems communication and parameters, • Create Field Service procedures if there is not available for trouble-shooting, and maintenance, • Participate on training material some customers as requested but the Training Manager, • Research alternative components that can be used in the field, • Coordinate with R&D engineering in China if required help during troubleshooting, • Take the lead in some projects such as upgrades or retrofit as well as commissioning, • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer, • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plants, • Help on the repair activities in the Service center, • Prepare, deliver and submit field reports to customer and management, • Support development of technical proposal and provide comments on the technical content and level of effort of the proposed scope of work, • Conduct site visits, experimental investigations and analyze engineering problems, propose solutions and alterative, and provide recommendations Minimum Requirements: • 7 plus years of overall experience in engineering filed, • 3 years of experience in Battery Storage systems and 2 years for solar inverters, • Must be fluent in Mandarin, • Must possess the ability to work with test equipment and hand tools as required, • Must possess customer service, problem-solving skills, and possess decision making and analytical skills, • Must possess effective written and verbal communication skills, • Must be able to closely follow instruction and pre-established procedures/SOP to perform the ductions of the job, • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • OSHA, NSPA70A, Electrical Safety Education or Desired License and Certificates: • Bachelor’s degree in Engineering from accredited university or college, • Renewable industry experience is required, • Power Electronics experience is required Competencies: • Technical problem solving/analytical skills, • Self-starter, strong initiatives and an excellent communicator, • System and product level mindset, • Detailed-oriented nature and strong initiative, • Strong technical support focus and a service oriented individual both with Sales team and customers Travel: • 80% Plus Work Location and Status: • Contract-to-Hire, Austin area, • No visa/legal sponsorship Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base pay for this role is between $36 - $40 per hour. This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. #LI-LV1

Job Description ENGEL embodies a spirit of innovation, built on decades of experience. With a dynamic workplace, ENGEL is the injection molding industry leader in technological advancements, ensuring sustainable global growth. The ENGEL company history is a success story that we keep on writing everyday together with our employees. Do you have what it takes to spur game-changing innovation, generate creative solutions and add world-class value to our customers? Then get ready to join the ENGEL team and become part of the next chapter in our history as we continue to grow the business in North America! ENGEL Machinery North America has a job opportunity for a Service Technician in our Service Department. ENGEL provides excellent benefits including health, dental and vision insurance all upon first day of hire (no waiting period and very robust coverage at an affordable price), 401k with match, over 3 weeks’ PTO, personal time off, employer paid life insurance, long and short term disability, and an employee-centric environment. Field Service Technicians have extended benefits beyond those including a comprehensive vehicle program (monthly stipend + mileage reimbursement), $75 per diem, tool reimbursement, cell phone, laptop, and only occasional voluntary travel on weekends! Job Summary: The Service Technician performs work remotely at customer sites; installing and servicing equipment while also providing customer training and support, as necessary. Essential Duties and Responsibilities: · Troubleshoots and repairs injection molding machines and robots, including conducting tests and inspections on all mechanical, hydraulic, pneumatic, electrical, and electronic or software components including calibrations to optimize performance. Performs software and hardware installations. · Performs all safety checks on equipment. · Educates customers on equipment and instructs on proper operation. · Manages resolution of customer issues, including order and installation of replacements parts as necessary. · Orders replacement parts with diagnoses of problems with control systems and develops an organized approach to solving machine problems and repairs/replaces parts as required. · Instructs other Service Technicians and/or customer operators on the maintenance and safe operations of injection molding systems. · Communicates on an ongoing basis with Central Service/Manufacturing/Parts Center to obtain answers to problems encountered in the field. · Provides written reports on a regular basis to the Service Manager. Educational/Training Requirement: · High School Diploma Required · Associate’s or Bachelor’s degree preferred Experience: · 5+ Years in Injection Molding troubleshooting or processing or prior experience as a Field Service Injection Molding Technician/Service Engineer Knowledge, Skills, and Abilities: · Knowledge of blueprints and schematics to troubleshoot electrical/electronic, hydraulic, and mechanical systems · Experience with injection molding machines, well rounded skill set in electrical, mechanical, hydraulic, computer and able to provide basic training for customers and employees · Knowledge and understanding of injection molding process · Ability to troubleshoot problems systematically · Knowledge of microprocessor programming · Knowledgeable in materials such as PET, Polypropylene, Polyethylene, Styrene and other common materials · Excellent communication and interpersonal skills and strong customer service orientation · Tact and diplomacy, i.e., must possess the ability to handle difficult or unhappy customers · Dedicated team player with a positive attitude. · Familiarity with ENGEL machines and robots is preferred · Uses internal resources efficiently to resolve customer issues expeditiously and correctly · Able to work independently with minimal back office (engineering, spare parts, phone/technical support.) MUST HAVE - Must have a valid Passport, driver’s license in good standing that incudes REAL-ID. WHY ENGEL? The ENGEL group has been thriving for decades. This is because as a family-run company, we rely on long-standing relationships and aim to live up to our own exacting standards of expertise and experience in all fields of plastics processing. We see ourselves as a driving, innovative force that has continually set new standards in a dynamic and diverse industry. Our competitive edge has come from generating added value for customers worldwide. ENGEL attaches great importance to flexibility, innovation and self-responsibility of all of its employees and business units. This is the only way to consistently supply and guarantee results of the highest global standards. ENGEL offers a competitive total compensation package to eligible employees, including: health, dental, LTD and life insurance, 401k with match, contribution to HSA, Dependent and Health FSA, vacation pay and holiday pay. We are looking forward to receiving your application and resume and going over the position with you. ENGEL is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protective veteran status or any other category protected by state or local laws. ABOUT THIS COMPANY ENGEL is a global leader in the manufacture of plastics processing machines. Today, the ENGEL Group offers a full range of technology modules for plastics processing as a single source supplier: Injection molding machines for thermoplastics and elastomers, and automation. In 2016/2017 ENGEL’s turnover totaled approximately 1.36 billion euros worldwide, with 5,900 employees across nine production plants in Europe, North America and Asia (China and Korea), and subsidiaries and representatives in more than 85 countries. ENGEL offers its customers the excellent global support they need to compete and succeed with new technologies and leading-edge production systems.

Job Description Bosch Building Technologies – System Designer III About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The System Designer III will be required to provide design, engineering, modeling, drafting, and budgeting support for projects throughout the organization, across all North American Geographies. Additionally, they will assist the Design Group Leadership and Colleagues in continuing to build our company design standards, templates, blocks, families, details, and processes. Responsibilities: • Coordinate and interact with customers (end users, architects, construction managers, general contractors, electrical engineers, and others) to understand their needs and then perform detailed designs Low Voltage technology systems such as Cabling, Security, Audio Visual and DAS., • A Systems Designer may specialize in one Low Voltage Trade, but all Systems Designers are expected to pursue cross training across disciplines., • Attend and host meetings independently on behalf of Paladin. Take and distribute accurate and timely notes to the team, follow up with action items assigned and communicate company commitments., • Coordinate and interact with estimators and engineers throughout the organization, including all geographies across North America, to develop project budgets, technical design requirements and scopes of work related to the design of all sub-disciplines of Low Voltage Technology Systems., • Coordinate and interact with the Sales team and other Project Sponsors to understand the needs and expectations of the client and project and to ensure the best possible client experience., • Prepare detailed and accurate budgets, utilizing technical estimating resources where necessary., • Perform electronic takeoffs using Bluebeam software as directed., • Manage the Designers assigned projects to include billing, cash flow, cost projections and schedule management., • Create technology systems flow line diagrams., • Develop Security riser diagrams, door details, and mounting diagrams., • Develop network diagrams., • Perform the Designer’s own drafting and modeling using Autodesk CAD and Revit software as needed and as practical., • Coordinate and collaborate closely with Paladin’s Drafters and BIM Modelers to provide clear CAD requests, feedback, and guidance for Drafting and modeling work related to the Designers projects that will be performed by the VDC team., • Provide supplemental Peer Reviews of designs and documentation prepared by others throughout the organization as directed., • Participate in both internal and external kickoff meetings as needed to support a smooth transition and exchange of information as a project passes from the design to the build phase., • Perform construction administration on design projects as assigned., • Provide advice, assistance and support to estimators, engineers, project managers and other Paladin employees when requested., • Provide support for existing or potential customers with the utmost professionalism at all times whether on the phone, in writing (email or text/direct message) or in person., • Effectively and professionally manage multiple communications platforms (email, collaboration/messaging (MS Teams), • Increase AV & Security Systems knowledge periodically throughout the year., • Increase Networking knowledge periodically throughout the year., • Maintain and increase industry recognized certifications like CTS, CSPM, etc., • Maintain and stay current with Voice/Data Cabling Systems knowledge periodically throughout the year., • Increase and maintain knowledge of current product offerings for Video Management Systems, Audio/Visual control and distribution systems, cameras, access control management platforms, and other low voltage technology components., • 5+ years of design experience, • 5+ year of experience in the low voltage or technology industry, primarily structured cabling, • Competency in various software platforms typical in the design industry, including (but not limited to): AutoCAD, Revit, MS Office Suite (Word, Excel, Outlook) MS Teams, MS Projects, etc., • Compensation: $118,000 - $135,000 (DOE), • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Travel Requirements: N/A This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Principal FPGA Engineer I to our team. If you enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA circuits and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in digital signal processing or board-level hardware design is also helpful in the role. As a principal level employee, you will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Lead FPGA design and verification efforts for space-based programs ensuring compliance with industry standards and program requirements., • Work with cross-functional teams (system engineering, hardware designers, and software engineers) to define FPGA architecture, partitioning, interface definitions, and specifications., • Develop FPGA architecture based on high level system requirements to formulate part selections and SWAP-C estimates with an emphasis on FPGA utilizations and power consumption., • Act as the subject matter expert when participating in design reviews and bringing technical expertise and insight to the team., • Mentor and guide junior FPGA designers to drive for efficiency, quality, and consistency., • Maintain pulse on emerging technologies to drive future product development for space applications.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • A Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • 9 years of industry or university research experience in the design, analysis, and implementation of FPGA systems at the HDL level., • Proficiency in VHDL and/or Verilog design capture., • Familiarity with radiation-tolerant FPGA devices (Xilinx Versal, Xilinx UltraScale+, Xilinx RFSoC, Micorsemi PolarFire, RTG-4)., • Expertise in FPGA implementation (synthesis, place and route and timing closure) and verification., • Proficient in HDL coder, Modelsim RTL simulation tools, Xilinx and Microsemi tool flows., • Strong understanding of space environment considerations and radiation effects on FPGA parts to develop mitigation techniques., • Hands-on experience with lab instruments such as digital oscilloscopes, spectrum analyzers, RF signal generators, and vector signal analyzers., • Experience with high-speed interfaces and power optimization techniques for space applications., • Proven track record of successful FPGA designs deployed in space programs., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience with worst-case analysis, failure method and criticality analyses, and reliability analysis., • Familiarity with digital communications and digital signal processing., • Experience with board-level hardware design., • Demonstrated ability to work efficiently with a distributed team., • Proficiency with git source code control.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a highly skilled and experienced Principal Embedded Software Engineer II to join our software team. In this position, you will be responsible for low-level and high-level software in Cesium’s products through all phases of the development process. Key projects will include Linux-based single-board computers and high-reliability microcontroller systems. Cesium’s goal is to create an out-of-the-box hardware and software experience which enhances our customers’ ability to rapidly integrate our products into their systems. As a Cesium software team member, you will be responsible for software designs from concept through production, including product roadmaps, block diagrams, detailed design and coding, analysis, test, qualification, and in-orbit support. The ideal candidate will have development experience at nearly every level of the software stack, including microcontrollers, low-level drivers, board support packages (BSP), end-use applications, and user interfaces. Additionally, the ideal candidate will have experience in software testing and high-reliability qualification, as well as software engineering and software project management practices. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB DUTIES AND RESPONSIBILITIES • Design and implement software for embedded devices and systems, from requirements to production and commercial deployment., • Design, develop, code, test, debug and document system software., • Review code and system designs., • Analyze code for efficiency, stability and scalability., • Integrate and validate new product designs., • Support software quality assurance and optimize I/O performance., • Provide post-production/in-orbit customer support., • Interface with hardware design and development engineers., • Assess third party and open source software.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor of Science (BS) or Master of Science (MS) degree in Computer Science, Electrical Engineering, or Computer Engineering., • Minimum of 11 years of industry experience in software development., • Experience in hands-on development and troubleshooting of embedded hardware. API design for interfacing with FPGAs., • Extensive programming experience in C and an object oriented programming language, preferably C++., • Experience in embedded systems design with preemptive, multitasking real-time operating systems (experience with real-time Linux is desirable)., • Familiarity with software configuration management tools, defect tracking tools, and peer review., • Excellent knowledge of real-time system coding techniques, IP protocols, interfaces, and hardware subsystems., • Excellent understanding of multi-threaded applications and resource management., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Experience with products for aerospace applications., • Adequate knowledge of reading electronics schematics and component data sheets., • Experience with ARM processors and fully-featured microcontrollers.

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior FPGA Engineer II - Network to our team. If you enjoy working in a startup environment and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA designs and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in board-level hardware design is also desirable. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • Minimum of 6 years of industry or university research experience in the design, analysis, and implementation of FPGA systems., • Production experience in design, implementation, and integration of OSI Layers 2 and 3 networking systems, including protocols such as Ethernet, IP, and MPLS., • Experience in networking system design, especially in determining throughput and memory requirements., • Expertise in writing and reviewing VHDL., • Proficiency in writing and reviewing SystemVerilog for block and system verification., • Expertise in FPGA design and verification tools for modern complex FPGA and SoC platforms such as Xilinx Vivado and Siemens Questa., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Deep understanding of network design and an ability to derive requirements based on high-level objectives., • Familiarity with non-FPGA networking platforms including ASICs and general-purpose processors., • Aerospace design and qualification., • Worst-case analysis, failure method and criticality analyses, and reliability analysis., • Experience with board-level hardware design., • Familiarity with communications systems, such as digital signal processing.

Job DescriptionJob Description Renesas Electronics America is seeking a mid-level PMIC Firmware Verification Engineer to join our Infrastructure Power team in Austin, TX. In this role, you will verify and validate embedded firmware used to control high-performance power management ICs for data center, AI accelerator, networking, and computing platforms. This role focuses on pre-silicon and post-silicon verification, requiring a solid understanding of power electronics and practical experience with SystemVerilog-based verification. You will work closely with firmware, silicon design, and applications engineers to ensure reliable PMIC operation in real customer environments. Responsibilities: • Develop and maintain SystemVerilog testbenches to verify firmware behavior and firmware-hardware interaction., • Run simulations and debug issues in pre-silicon environments, including RTL simulations and emulation platforms., • Support post-silicon bring-up, validation, and characterization of PMIC firmware features., • Assist firmware developers in implementing and debugging control algorithms, sequencing logic, telemetry, and protections., • Create automated scripts (Python/Perl) to streamline verification regressions and lab bench measurements., • Use test equipment (oscilloscopes, power supplies, logic analyzers) to validate functionality and debug hardware/firmware issues., • Document firmware verification flows, test plans, and test results., • Collaborate with cross-functional teams to resolve issues found during validation, simulation, or customer evaluation.Qualifications, • Education: BS/MS in Electrical Engineering, OR Computer Engineering., • Experience: Minimum 5 years of firmware verification experience in pre-silicon environment., • Hands-on experience developing or using SystemVerilog testbenches., • Working familiarity with hardware RTL or digital subsystem design., • Strong programming skills in C for embedded systems., • Proficiency in Python or Perl for scripting and test automation., • Strong debugging ability and analytical reasoning skills., • Experience with UVM or other structured verification methodologies., • Familiarity with ARM Cortex-M microcontrollers., • Experience with emulation platforms such as FPGA-based environments or QEMU., • Familiarity with debug tools such as SimVision, Verdi, or similar., • Understanding of I2C, PMBus, SPI, or other low-speed bus protocols., • Knowledge of digital voltage regulation, control loop behavior, and system-level power sequencing., • Exposure to CI/CD pipelines for firmware or simulation regression. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose ‘To Make Our Lives Easier.’ As the industry’s leading expert in embedded processing with unmatched quality and system-level know-how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, including High Performance Computing, Embedded Processing, Analog & Connectivity, and Power. With a diverse team of over 22,000 professionals in more than 30 countries, we continue to expand our boundaries to offer enhanced user experiences through digitalization and usher into a new era of innovation. We design and develop sustainable, power-efficient solutions today that help people and communities thrive tomorrow, ‘To Make Our Lives Easier.’ At Renesas, you can: • Launch and advance your career in technical and business roles across four Product Groups and various corporate functions. You will have the opportunities to explore our hardware and software capabilities and try new things., • Make a real impact by developing innovative products and solutions to meet our global customers' evolving needs and help make people’s lives easier, safe and secure. Join Renesas. Shape Your Future with Us. Renesas Electronics is an equal opportunity and affirmative action employer, committed to celebrating diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by federal, state or local law. For more information, please read our Diversity & Inclusion Statement. Renesas Electronics deals with dual-use technology that is subject to U.S. export controls regulations. Under these regulations it may be necessary for Renesas to obtain U.S. government export license prior to release of technology to certain persons. The decision whether or not to file or pursue an export license application is at the sole discretion of Renesas. We have adopted a hybrid model that gives employees the ability to work remotely two days a week while ensuring that we come together as a team in the office the rest of the time. The designated in-office days are Tuesday through Thursday for innovation, collaboration and continuous learning.

Job Description VP Development & Construction - Critical Facilities - Austin TX This opportunity is working directly with a leading mission-critical data center developer / wholesaler / Colo provider. This company provides turnkey data center solutions custom-fit to the requirements of their client's ever-changing mission-critical facility's operational needs. They accomplish this by providing reliability of mission-critical facilities for many of the world's largest organizations (Hyperscale and Enterprise Customers). This opportunity provides a career-growth minded role with exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. We are looking for a VP of Critical Facilities Development & Construction to lead data center construction and development projects. The VP will oversee all aspects of project delivery, including budget management, scheduling, and quality assurance, ensuring projects align with company standards and objectives. This role requires providing strategic leadership to contractors, consultants, and vendors throughout the project lifecycle. Focus on ensuring projects are delivered on time, within budget, and meeting scope and quality expectations. The ideal candidate will be highly organized, detail-oriented, and capable of managing both the strategic and administrative aspects of development and construction, including setting and oversight of budgets, contracts, change orders, and other essential documentation. The ideal candidate preferably has come up the ranks from the GC Space as a PX that has MEP / Civil / Structural Experience. The ideal candidate will help grow the team with key hires in construction once on board. Responsibilities: • Manage and oversee the full lifecycle of data center development and construction projects up to the point of either Core and Shell or through MEP Construction / Integration / Go Live, • Develop and maintain overall project budgets on all projects, ensuring adherence to financial targets, • Oversee creation and manage project schedules, addressing critical path conflicts as needed, • Develop / Delegate the issuance of RFPs for project bids, evaluate bidder qualifications, and negotiate contracts, • Supervise consultant and contractor activities throughout all project phases, • Oversee job cost tracking systems to ensure compliance with budgets and schedules; process invoices and support cost reporting, • Regularly report on project status and key milestones to senior leadership, • Ensure compliance with local, state, and federal regulations, including permits and safety requirements., • Participate in due diligence processes for potential developments and acquisitions, • Drive zoning and rezoning efforts, understand permit process, collaborate with legal and engineering teams, • Implement sustainability and efficiency initiatives or other energy efficiency programs, • Contribute to ongoing process improvements and workflow optimization within the department, • Belong and attend professional organizations such as AFCOM, ASHRAE, 7x24 Exchange, PTC, Datacenter Dynamics / DCD, Uptime, iMasons, Bisnow, etc., • Possess an extensive network within the mission critical data center facilities construction market, • 8-10+ years of experience in construction management, with a focus on complex data center or mixed-use critical facilities projects from inception to completion, • Experience managing Data Center Construction Projects as an Owner or as a General Contractor, • Must be familiar with the design process of building systems for data center and mission critical projects., • Previous GC experience (Holder, Turner, DPR, HITT, etc.), • Strong experience managing project budgets, schedules, and contracts, • Familiarity with design, development, and construction principles specific to mission-critical data center facilities – MEP / CSA : Mechanical, Electrical, Plumbing, Civil, Structural and Architectural, • Proficient in drafting agreements and reviewing contracts, • Strong working knowledge of Microsoft Office Suite; experience with design software is a plus, • Analytical and detail-oriented, with the ability to manage multiple projects in a fast-paced environment After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Who We Are Thermon is a global industrial technology leader and the world's foremost provider of mission-critical heating solutions. From power generation and semiconductors to oil & gas and food processing, our systems keep essential industries running safely, efficiently, and reliably. We don't just make heaters, we deliver complete, end-to-end solutions that include design, installation, controls, and monitoring. Our people and products transfer the warmth needed to make life work. Headquartered in Austin, Texas, and operating in 18 countries, Thermon is built on the values of Care, Commit, and Collaborate. We're a team of innovators and problem-solvers, united by our mission and driven by a culture of ownership and impact. Who We Want We're looking for a Senior Embedded Systems Engineer to join our R&D Controls and Accessories Team and help build the next generation of industrial control hardware and IIoT-connected devices. Our products operate in harsh industrial environments around the world, where reliability isn't a feature, it's a requirement. This role is ideal for someone who lives closest to the metal, fluent in C/C++ and real-time firmware, comfortable reasoning about signal integrity, power budgets, and hardware-software boundaries, but who can also bridge up to communication protocols and connectivity layers to shape how our devices integrate into modern IIoT platforms. You'll own firmware from schematic review through production release. You'll thrive here if you: · Want to make a real impact on a small, empowered team. · Enjoy building a product that solves real-world problems and improves continuously through customer feedback. · Are energized by the challenge of integrating industrial controls hardware into a modern software platform. · Love designing elegant systems and modeling complex data. · Take pride in writing clean, maintainable, and performant code. · Leverage modern AI tools and workflows as a force multiplier, using them to move faster, reduce rework, and raise the quality bar from the first commit. What You'll Do · Develop and maintain production-quality firmware in industrial control devices. · Collaborate with hardware engineers during schematic review, board bring-up, and design validation. · Debug hardware-firmware interaction issues at the signal level (scoping, logic analysis, fault isolation). · Implement and maintain user-friendly and highly responsive user interfaces, real-time control loops, watchdog circuits, and safe operating state machines. · Integrate and extend support for industrial communication protocols (Modbus RTU/TCP, CAN Bus, MQTT, RS-485) as well as Ethernet, USB, and common 2.4GHz wireless stacks. · Develop and maintain production test firmware and factory acceptance test (FAT) tooling for manufacturing handoff. · Manage firmware releases through version control · Contribute to system documentation and architectural clarity. · Drive best practices through code reviews, mentorship, and continuous improvement on a cross-functional team. What You Bring · 5+ years of professional experience developing embedded firmware for production hardware products. · Strong proficiency in C and C++ for microcontroller targets (ARM Cortex-M, STM32, or similar) as well as Python for test. · Hands-on experience with RTOS environments (FreeRTOS, Zephyr, or equivalent) and GUI Toolkits (TouchGFX, LVGL, emWin, Embedded Wizard, or Qt for MCUs). · Solid understanding of embedded fundamentals: interrupts, timers, DMA, GPIO, UART/SPI/I2C, ADC/DAC. · Experience debugging hardware-firmware issues using oscilloscopes, logic analyzers, and JTAG/SWD debuggers. · Familiarity with industrial communication protocols (Modbus, CAN Bus, RS-485, BACNet). · Experience reading and reviewing schematics and PCB layouts (Altium Designer or equivalent). · Understanding of firmware release processes, version management, and manufacturing handoff. · Bachelor's degree in Electrical Engineering, Computer Engineering, or related field. Bonus Points For · Experience with hardware certification processes (CSA, UL, CE, EMC/EMI testing). · Familiarity with IIoT connectivity and cloud integration (MQTT, Azure IoT Hub, AWS IoT Core). · Experience with Altium Designer for PCB design review or DFT feedback. · Knowledge of functional safety principles (UL60730, UL61010) or hazardous location (HazLoc UL60079) design requirements. · Experience developing factory acceptance test/production test. · Familiarity with containerization and DevOps tooling (Docker, Jenkins, CI/CD pipelines). · Experience with bootloader development and secure firmware update (OTA) mechanisms. Why You'll Love Working at Thermon · Team Impact: Small, agile team where your contributions ship to real products in the field. · Global Reach: Your work will power critical infrastructure around the world. · Full Product Ownership: Work from concept validation through certification and manufacturing release. · Collaborative Culture: Cross-functional teams that value engineering rigor, creativity, honest feedback, and continuous improvement. · Comprehensive Benefits: Competitive salary, health coverage, 401(k) with match, and more. · Austin-Based: Work in one of the most vibrant tech hubs in the country. Join us!

Job Description Life Unlimited. At Smith+Nephew we design and manufacture technology that takes the limits off living. Provide technical support for the maintenance, design and development of high frequency surgical equipment and accessories related to Smith and Nephew’s product lines. Assist manufacturing groups with the evaluation and resolution of technical problems. Support senior engineers with documentation, testing and organization, including coordinating external compliance testing to applicable standards, IEC certifications, product design, EOL/long lead-time part replacement, returns support, verification/validation testing, test procedure updating/creating. What will you be doing? Design, test, debug, document, prototype and develop analog and digital electronic circuits, and support hardware used within instrument products. Identify and test alternate components when obsolete. Contribute to protocols for verification and validation testing, perform risk analyses, write test reports, and maintain a laboratory notebook. Identify, collaborate and manage outside suppliers on material selection, tool design, manufacturing technologies and specifications for components, sub-assemblies, and finished assemblies. Coordinate and support electrical safety (IEC 60601-1), safety of HF Surgical Equipment (IEC 60601-2-2) and EMI/EMC (IEC 60601-1-2) certification testing.Study the latest revision of standards to ensure existing products meet those standards. Analyze existing product specifications to provide key design information necessary for international regulatory submissions. Investigate instrument failures from field returns in order to understand failure mechanism and institute design changes to improve product reliability.Provide engineering support to customer service, manufacturing, marketing and other departments for instrument or system performance problems in the field. Provide continuous technical support to maintain and improve cost, performance and quality. Work with contract manufacturers and suppliers to ensure product is built to specifications, investigating production issues, qualifying new parts due to new suppliers or process changes, transfer product to production or moving from one manufacturing facility to another. Support new suppliers by reviewing IQ, OQ, PQ protocols and reports to ensure capable of producing high quality parts consistently. Ensure compliance with Smith & Nephew quality system and all relevant internal procedures and policies. What will you need to be successful? * Must have a B.S. degree in Electrical Engineering. Advanced degree in a technical discipline is a plus. * BS and 2+ years within the medical device industry or electronic design in a regulated industry; or MS and 1+ year within the medical device industry or regulated industry. * Must have experience designing circuits (mixed-signal, analog and digital), PCBAs (creepage, clearance, etc.), simulation and testing. Must be familiar with Safety design (isolation, transformers, opto-isolators). Must be comfortable with benchtop work using lab equipment and debugging tools such as oscilloscopes, logic analyzers, multimeters, soldering irons, etc. Experience in high frequency layout or RF design a plus. * Experience in Electrical Safety (IEC/UL 60601-1), safety of HF Surgical Equipment (IEC60601-2-2), and EMI/EMC (IEC60601-1-2) certification testing preferred. * Competences: Excellent communication skills both verbal and written. Must be effective working independently as well as in cross-functional teams with strong problem solving and troubleshooting skills. Need to be able to investigate issues to determine logical conclusions based on data collected. * Computer skills: good knowledge of MS Office Suite; knowledge of schematic capture software and PCB layout software for circuit design (Altium, ORCAD, Eagle) preferred. * The ideal candidate is passionate, driven and motivated to succeed while maintaining a positive team environment. Physical Demands: Mostly sitting, using a computer with minimal weight lifting (5.1 kg - 30 kg). No chemical exposure or PPE required. Travel Requirements: Domestic and International ≤ 10% You Unlimited. We believe in creating the greatest good for society. Our strongest investments are in our people and the patients we serve. * Inclusion and Belonging- Committed to Welcoming, Celebrating and Thriving on Inclusion and Belonging, Learn more about Employee Inclusion Groups on our website ( ). * Your Future: 401k Matching Program, 401k Plus Program, Discounted Stock Options, Tuition Reimbursement * Work/Life Balance: Flexible Personal/Vacation Time Off, Paid Holidays, Flex Holidays, Paid Community Service Day * Your Wellbeing: Medical, Dental, Vision, Health Savings Account (Employer Contribution of $500+ annually), Employee Assistance Program, Parental Leave, Fertility and Adoption Assistance Program * Flexibility: Hybrid Work Model (For most professional roles) * Training: Hands-On, Team-Customized, Mentorship * Extra Perks: Discounts on fitness clubs, travel and more! #LI-ON-SITE Smith+Nephew provides equal employment opportunities to applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability. You should be proficient in: • Electrical Troubleshooting Skills, • Electrical / Electronic Systems

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a Senior FPGA Engineer II to our team. If you are great at what you do, enjoy working in a startup environment, and are passionate about developing leading-edge hardware for satellites, spacecraft, and aerospace systems, we would like to hear from you. In this position, you will be responsible for FPGA circuits and systems through all phases of the development process. The ideal candidate will have experience in FPGA design, verification, test, and deployment at the HDL level. FPGA HDL designs will include high-speed serial interfaces and data streams, digital processing cores, multiple clocks and clock domains, and management interfaces. Testing, validation, and verification will also be central tasks for any FPGA design. Experience in digital signal processing or board-level hardware design is also desirable. The successful candidate will present engineering design review materials to our customers and executive team, as well as participate in proposal-writing efforts. As such, excellent written and verbal communication skills are required.JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS • Bachelor of Science (BS) or Master of Science (MS) degree in Electrical Engineering or Computer Engineering from an accredited university or institution., • Minimum of 6 years of industry or university research experience in the design, analysis, and implementation of FPGA systems at the HDL level., • Expertise in FPGA design and verification (Verilog/VHDL, HDL coder, Xilinx’s Vivado, Modelsim, etc.)., • Hands-on experience with lab instruments such as digital oscilloscopes, spectrum analyzers, RF signal generators, and vector signal analyzers., • Excellent written and verbal communication skills.PREFERRED EXPERIENCE, • Aerospace design and qualification., • Worst-case analysis, failure method and criticality analyses, and reliability analysis., • Experience with board-level hardware design.

Job DescriptionTherapy Consultant (Medical Device Sales Representative) - Austin/San Antonio TX About Enterra Medical Enterra Medical is a medical device company dedicated to a singular focus: helping more people with chronic gastroparesis live better lives by advancing technology, expanding clinical science, and accelerating access to the Enterra® Therapy. Joining Enterra Medical as a Therapy Consultant provides a rare opportunity to be an early part of a fast-paced, start-up environment in a highly underpenetrated market, but with the confidence of representing a product with a proven track-record and an established customer base to build upon. The Therapy Consultant will be joining a tenured, mission driven team of sales colleagues who are passionate about increasing access and awareness to Enterra Therapy. We are seeking proven, high performing medical sales professionals with demonstrated results in past market development positions to help us expand awareness and utilization of Enterra Therapy in new or underpenetrated markets. About Enterra Therapy Enterra is a fully implantable Gastric Electrical Stimulation (GES) system that consists of: a small, battery-powered neurostimulator that is implanted beneath the skin in the lower abdominal region, and two stimulation leads that deliver mild, controlled electrical pulses into the muscles and nerves of the stomach. Enterra Therapy is indicated for use in the treatment of chronic, intractable (drug refractory) nausea and vomiting secondary to gastroparesis of diabetic or idiopathic etiology in patients aged 18-70. Enterra Therapy Consultant Responsibilities: • Open new Enterra Therapy programs, gaining alignment with implanting surgeons, referring gastroenterologists, other associated referring physicians, and supporting administrative teams., • Create and implement market development strategies designed to raise awareness and increase access to Enterra Therapy. This can include referral sales calls on a variety of specialties, hosting educational events, and other market awareness raising activities., • Provide expert clinical support to physicians, APPs, and other health care providers during the evaluation, implantation, and post operative management phases of the therapy., • Educate and train health care professionals on gastroparesis treatment, associated clinical data, patient selection, and appropriate implementation of Enterra Therapy., • Develop and demonstrate a strong understanding of the reimbursement dynamics associated with Enterra therapy in order to have value-based sales conversations with economic stakeholders., • Respond to customer needs, questions, and concerns regarding products and services., • Appropriately record and submit any product observations and/or complaints to the Enterra Medical Quality Management System., • Exceed all quarterly sales goals and MBOs assigned by Enterra Medical, • Manage the company's resources within guidelines and governmental regulations., • Be available for calls after normal working hours as needed by the customer and Enterra Medical.Position Requirements:, • Minimum of 5 to 7 years documented experience as a high-performing medical sales representative., • Experience in calling on Gastroenterology, Foregut/Bariatric Surgery, or other implantable Neuromodulation therapies strongly desired., • Preferred bachelor’s degree in business, Engineering, or Allied Health/Life Sciences., • Must reside within territory (New Orleans/Baton Rouge/Jackson) I1DuqSaHwN

Job DescriptionPlease Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are seeking a Principal DevOps Engineer I for Embedded Software to own and scale the infrastructure that supports our mission critical software development across multiple programs and product lines. In this role, you will advance infrastructure that generates software images, deploys them onto hardware, ensures continuous integration/continuous development, organizes and optimizes Yocto embedded builds, and maintain high-performance, Linux-based build environments. The ideal candidate understands embedded software stacks and the modern tools that accelerate their development.JOB DUTIES AND RESPONSIBILITIES • Ideally deep experience with OpenEmbedded and the Yocto Project., • Understanding of make and cmake., • Understanding of build flows from compilation to image generation., • Facility with GitLab CI/CD pipelines and GitLab Runners that build, test, and deploy embedded software for harware for test., • Ensure CI systems integrate with hardware-in-the-loop test environments for regression and validation., • Deep facility with yaml-based CI configuration., • Facility with Docker virtual build environments and containerization., • Administer and maintain high-performance Linux build machines used for continuous integration, regression testing, and software release packaging., • Monitor system performance, scale compute resources, and maintain uptime for development teams., • Support and automate the software release process for production releases to customers., • Manage build artifacts, versioning, and delivery., • Act as the first line of support for developers encountering build, test, or environment issues., • Collaborate with software teams to improve developer productivity., • Assist in maintenance and utilization of company could-based AI productivity environmentJOB REQUIREMENTS AND MINIMUM QUALIFICATIONS, • Bachelor’s degree in Computer Science, Electrical/Computer Engineering, or related field (or equivalent experience)., • Minimum of 9 years of relevant experience., • Proven facility with CI/CD tools (e.g., GitLab CI, Jenkins, or similar)., • Proficiency in Linux system administration, including performance tuning and troubleshooting., • Familiarity with Yocto or other embedded Linux build frameworks., • Experience with build automation tools (CMake, Make, BitBake, etc.)., • Strong scripting skills (Python, Bash, or similar)., • Excellent problem-solving skills and ability to work collaboratively with developers., • Knowledge of networking and distributed systems., • Experience with containerization (Docker, Podman) and virtualization (KVM, VMWare)., • Knowledge of networking and distributed systems., • Familiarity with hardware-in-the-loop (HIL) testing environments.PREFERRED EXPERIENCE

Strong background in Electrical Engineering, Computer Science, or closely related field (advanced degree preferred).

At McGuire Moorman Lambert Hospitality (MML), we are devoted to creating some of the world’s most memorable hospitality experiences, where exceptional cuisine, inspired design, impeccable service, and authentic storytelling come together in harmony.Founded by Larry McGuire, Tom Moorman, and Li

Strong background in Mechanical or Electrical Engineering or closely related field.

Construction management, architecture, and engineering. Associates degree in Construction Management, Construction Science, Architecture, or Engineering. Bachelor's degree in Construction Management, Construction Science, Architecture, or Engineering.