Trabajos electrical engineering technology en Madison, WisconsinCrear alertas

Job Description As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for structural detailing, and multidisciplinary coordination. This role plays a critical part in translating engineering concepts into accurate, constructible models and drawings using Revit and related BIM tools. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Develop, maintain, and revise structural BIM models in Autodesk Revit for a variety of project types. Ensure that all models comply with industry standards and project specifications., • Produce structural drawings, details, and schedules in support of design and construction documentation, • Assist structural engineers with model setup, modeling standards, and drawing production, • Coordinate structural models with architectural, MEP, and other discipline models to identify and resolve clashes, • Participate in BIM coordination meetings and respond to coordination issues, • Implement and adhere to company BIM standards, templates, and workflows, • Assist with model quality control to ensure accuracy, consistency, and constructability, • Support project teams during design development, permitting, and construction phases as needed, • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for structural systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all structural models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA’s commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to structural systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated Models: Ensure that structural Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA’s BIM processes for structural systems, contributing to improved project timelines and quality outcomes., • Data Integrity and Accessibility: Maintain high standards for data integrity throughout the project, ensuring accurate structural information is accessible to all stakeholders. Qualifications and Skills • Two- or four-year degree or certificate in Drafting, BIM, Civil/Structural Technology, or a related field, • 3+ years of experience in a structural (or architectural) drafting or BIM role, • Experience working in a consulting structural engineering (or architectural) environment, • Familiarity with Revit, Navisworks, Bluebeam, or similar coordination tools, • Knowledge of BIM execution plans, model coordination workflows, and LOD requirements, • Exposure to construction documents for commercial and/or industrial projects, • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to structural., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $50,000 to $80,000 depending on experience

Job Description BIOFerm™ is looking for a Quality Control Engineer to ensure its renewable energy projects meet the company’s standards for safety, performance, and reliability. This position oversees quality processes throughout design, fabrication, construction, and commissioning phases. The ideal candidate has strong technical aptitude, attention to detail, and experience implementing quality management systems within engineering or construction environments. BIOFerm™, a renewable energy company, is currently looking for a Quality Control Engineer. BIOFerm™ provides turnkey anaerobic digestion and gas upgrading facilities. Committed to sustainable and economical organic waste diversion, BIOFerm™’s digester technology harnesses biogas from fermenting organics—food waste, manure, biosolids, etc.—and converts it into valuable green energy, vehicle fuel, heat and organic products. Its gas upgrading systems enable biogas producers to profitably upgrade biogas to renewable natural gas (RNG). Key Responsibilities: • Develop, implement, and maintain quality control procedures and inspection plans for engineering, fabrication, and construction activities., • Review drawings, specifications, and project documents to ensure compliance with design standards and regulatory requirements., • Conduct inspections and quality audits on materials, equipment, and workmanship at vendor facilities and job sites., • Track and document inspection results, nonconformance reports, and corrective actions., • Collaborate with engineering, procurement, and construction teams to resolve quality issues in a timely manner., • Verify that subcontractors and suppliers meet BIOFerm’s quality and safety standards., • Support the commissioning process and verify that systems perform in accordance with project requirements., • Maintain calibration and testing records for inspections., • Provide training and guidance to project staff and contractors on quality expectations and procedures., • Prepare quality documentation for client handover, including inspection records and test reports., • Continuously improve QA/QC processes to enhance project efficiency and reliability., • Travel to fabrication shops, vendor locations, and project sites as needed., • Perform additional tasks as assigned. Competencies & Qualifications: • Bachelor’s degree in Mechanical, Electrical, Civil, or Industrial Engineering, or a related technical field., • 5+ years of experience in quality assurance/quality control within construction, manufacturing, or renewable energy sectors., • Strong understanding of engineering drawings, specifications, and industry standards (ASME, ASTM, AWS, etc.)., • Experience with quality management systems (ISO 9001 or equivalent)., • Proficiency in inspection techniques, root cause analysis, and corrective action implementation., • Strong problem-solving, organizational, and communication skills., • Proficient in Microsoft Office Suite and familiar with project management or document control software (e.g., Autodesk Build)., • Ability to work independently, manage multiple priorities, and collaborate effectively in cross-functional teams., • Willingness to travel and work at job sites as required., • Valid U.S. driver’s license., • Valid authorization to work in the U.S. without current or future sponsorship. Compensation & Benefits: Compensation is based on experience and is competitive. BIOFerm™ offers a comprehensive benefits package. To be considered for this position, please submit your cover letter, resume, and salary requirements. To learn more about BIOFerm™ and other positions available, please explore our website at BIOFermEPC.com.

Job DescriptionCompany Description Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world’s most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description As a Dispatchable Field Service Representative, you’ll be on the front lines providing operations and maintenance expertise on water treatment systems for our customers from one of a variety of industries. This mission critical role involves working on a variety of technologies including, media filtration, softening, reverse osmosis (RO), ion exchange (IX), de-oxygenation, electro deionization, and ultrafiltration (UF). Key Characteristics • Conduct maintenance and calibration activities, • Consult with customer management and operation teams, • Excellent mechanical know how and problem-solving skills, • Ensure contract compliance of volume and quality specifications, • Carry out mechanical, electrical and controls troubleshooting on equipment such as valves, air compressors, ejectors, process pumps, blowers, and instrumentation, • Create and maintain site paperwork, and provide customers with detailed technical summaries of work performed, • Maintain inventory of spare parts and adequate supply of chemicals and replacement parts, • Monitor and maintain chemical injection systems, • Perform analytical testing such as: turbidity, hardness, chlorine, pH, CO2, O2, SDI, TOC, in addition to various other site-specific testing requirements, • Review customer plant installations and compare against WTS reference drawings (PIDs, electrical schematics, general arrangement, etc.)Qualifications Required: • High School Diploma / GED / Home School Certification OR international equivalent 2+ years’ experience of service/maintenance or equivalent in an industrial environment., • Valid Driver’s License Preferred: • Demonstrated ability to work independently and remotely with project teams, • Provide customers with informal training around operation and maintenance of their system Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We’re an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: • Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate’s knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $22.60 - $33.00 USD, • Medical, Dental, & Vision Insurance Starting Day 1!, • Life Insurance, • Paid Time Off, • Paid Holidays, • Parental Leave, • 401(k) Plan - 3% default contribution plus matching!, • Flexible Spending & Health Saving Accounts, • AD&D Insurance, • Disability Insurance **Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity** Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

This Jobot Job is hosted by: Bryna Rabin Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $140,000 - $160,000 per year A bit about us: Incredible company with outstanding benefits! We are a company that shows we care for our employees. Incredible safety record for our organization. Generous Per Diem $120-$180/day Why join us? Incredible Benefits: Medical, Dental, Vision and more! Company-paid disability and life insurance FSA HSA 401K with generous contributions Performance incentives And MUCH, MUCH More! Job Details We are on the hunt for a passionate, dedicated, and highly skilled Permanent Electrical Superintendent (will also interview Foreman) to join our dynamic Engineering team. This role is pivotal in ensuring the seamless operation of all electrical systems within our organization. The successful candidate will be responsible for planning, directing, and coordinating activities pertaining to the construction, maintenance, and repair of electrical systems. This is a fantastic chance to work with a team of dedicated professionals and make a significant contribution to our ongoing success. Responsibilities: As a Permanent Electrical Superintendent, you will be expected to: 1. Oversee and direct the daily operations of the electrical department, ensuring all work is carried out to the highest standard., 2. Develop and implement maintenance procedures, monitor systems, and resolve any issues promptly., 3. Collaborate with project managers and engineers to determine the electrical needs for various projects and oversee the installation of electrical systems., 4. Ensure compliance with all safety and health regulations, implementing safety measures and maintaining a safe working environment., 5. Train, supervise, and mentor electrical workers and apprentices, providing guidance and support to ensure the highest level of productivity and efficiency., 6. Prepare and present reports detailing all electrical maintenance and repair work., 7. Stay updated with the latest advancements in electrical engineering and introduce new technology and methods when beneficial. If you are a team player with a passion for electrical engineering and a drive for excellence, we would love to hear from you. Join us and play a crucial role in maintaining the high standard of electrical systems in our organization. Reach out to me directly at Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Summary: The Installation Crew Lead will supervise, direct and train crew members to ensure high-quality and cost-effective installation of recreational equipment and systems, including Splashpads, Playgrounds, Adventure-Style Mini Golf Courses and more. Essential Duties: Essential job duties for this position include the following items. Other duties must be performed as assigned or required. Supervising and Leading the Crew (15%) • Assign tasks and monitor the progress of projects., • Ensure the crew adheres to safety standards and work schedules., • Prioritize projects and procuring necessary materials., • Maintain equipment records and project documentation., • Complete projects within anticipated cost and time parameters., • Develop and maintain expert knowledge of manufacturer installation guidelines and specifications for all products being installed., • Perform and oversee the installation of playground equipment, splashpads, and other park facilities., • Operate heavy equipment like skid steers, mini excavators, and telehandlers., • Monitor work quality and provide performance feedback., • Ensure construction standards are upheld., • Assist with administrative tasks and participate in stand-by status during emergencies., • Assist in the hiring of installation team members., • Work toward continuous quality improvement., • Stay current with changing technology, including software and industry specific programs., • Uphold, support, and promote all company policies and procedures. Supervisory Responsibilities: The Installation Crew Lead has supervisory responsibility for the Operations Department, including approximately three direct reports, including zero subordinate supervisors. Qualifications: To perform this job successfully, the individual in this position must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the minimum knowledge, skills and ability required. Education/Experience: • High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience., • AA/AS/BA/BS degree in Construction Management, Engineering, or a similar field (preferred)., • 1 to 3 years of field supervision experience preferably in the recreational environment., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ability to type and use a mouse., • Basic operations in email and internet navigation., • Valid Driver's License, good driving history, and dependable transportation., • Possession of OSHA 30 certification (preferred). Offer contingent on satisfactory findings related to background check to be conducted before start date.

Job Description Clasen Quality Chocolate (CQC) is a world-class manufacturer of chocolate and innovative coatings. We have recently been awarded the Top Workplaces Award by the WI State Journal - No. 2 Large Employer and the Benefits Award. CQC has been growing double digits annually because of our flexibility, commitment, respect and integrity, and we are looking for quality individuals to join our team. Working for a family-owned company provides you with the opportunity to wear many different “hats,” make a difference every day, and have fun doing it! We are committed to being an Employer of Choice in Southern Wisconsin and offering our employees a variety of traditional and unconventional benefits. We are currently accepting applications for an Electrical Engineering Manager at our state-of-the-art manufacturing facilities in Watertown and Milton, WI. The position works day shift hours Monday – Friday and requires up to 25% travel outside of WI and 75% within WI sites. The role will report to the Senior Engineering Manager. BENEFITS: • Health, Dental, Vision Insurance (Low deductible and copays, LASIK reimbursement, Adults orthodontics), • Company-paid Life and Disability Insurance, • 401(k) Match – up to 5%, • Paid Vacation, Personal and Volunteer days plus 11 holidays, • Paid maternity/paternity leave, • Wellness: Free fruit, insurance discounts, gym and run/walk/bike event reimbursement, free wellness checks, • Scholarships – Employee, spouse, and children, • Summer Camp Reimbursement – children of employees, • Tuition reimbursement, • Employee appreciation events, • Free chocolate and coating!, • Annual Bonus Potential – 5%+, • Onsite Fitness Facility JOB SUMMARY: Conceptualize, design, program, troubleshoot and optimize automation control systems and hardware for plant and building operations. Supervise and direct CQC Electrical Engineering Department across all North American sites. Ensure adequate contractor coverage, skills, manpower, and excellence across all sites. Work with integrators to design hardware and software systems for complex control and automation applications. Develop and apply electrical control master plan to all CQC facility electrical systems including automation and power distribution systems. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Lead team responsible for electrical and controls engineering for all capital projects including greenfield development, • Assign and lead electrical engineering department resources to projects as needed, • Develop electrical engineering department personnel’s skillset, • Conduct performance evaluations and coach personnel development within electrical engineering department, • Write, revise, review and approve detailed functional specifications for automated control systems, • Develop technology roadmap for CQC automation and electrical projects, • Work closely with other engineering disciplines to ensure timely and efficient execution of projects, • Design, draw, review and approve building electrical distribution systems including 480VAC-24VDC, • Program automation control systems for plant processes and building automation, • Direct contractors/vendors on activities related to projects, • Manage automation related continuous improvement projects, • Create and update electrical schematics for panel building and control system wiring, • Identify and order electrical hardware as necessary to support capital projects, • Support daily activities between Wisconsin manufacturing facilities, • Travel domestically to support electrical department personnel and implementation of electrical systems within CQC, • Perform all tasks assigned by the supervisor, while following all company, safety, and quality policies and procedures, • Maintain regular attendance at work QUALIFICATIONS: • Bachelor’s degree in electrical-related field preferred, • Minimum 5 years of supervisory or leadership experience, • Minimum 5 years of experience in electrical PLC programming and industrial electrical distribution in a manufacturing environment, preferably food manufacturing., • Experience with Siemens hardware and software preferred, • Fluent with UL Standards, NEC Codes (NFPA 70, 70E, and 79), • Fluent in AutoCAD Electrical and Standard, • Proficient in Microsoft Word, Excel, PowerPoint, Outlook, and Project, • Must have a driver’s license and good driving record EDUCATION / EXPERIENCE: SKILLS AND ABILITIES: • Work near allergens, such as peanuts, tree nuts, dairy, and soy, • Good oral and written communication skills are required, • Adaptability and flexibility are essential, • Customer focused, • Good team building and leadership skills are required, • Good decision-making ability, • Project management skills CQC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of disability, protected veteran status, race, color, religion, sex, national origin, sexual orientation, gender identity or any other characteristic protected by law. For more information, please visit our website at #ZR

Job Title: Staff Manufacturing Engineer Department: Manufacturing Engineering Employment Type: Full-time About NeuWave NeuWave Medical develops image guided microwave ablation tools and software that enables physicians to treat tumors in a minimally invasive procedure. This technology allows patients to be treated in outpatient settings, reducing procedural complexity and recovery times. Our organization is excited to be embarking on numerous new development projects to further improve patient care, and we are looking for new teammates to help us on this inspired journey. You’ll join an interdisciplinary group of engineers who work closely with manufacturing, quality, regulatory, clinical, and strategic marketing professionals. This team highly values rapid experimentation and close collaboration with clinicians. Our culture blends friendly competition with genuine camaraderie—we move quickly, celebrate wins, and build lasting relationships while shaping the future of the business. As part of NeuWave, you’ll have access to a comprehensive offering of competitive benefits. If you’re motivated by clinically meaningful problems, evidence driven development and building solutions at scale, NeuWave offers the chance to perform career defining work--with freedom to develop yourself within a progressive and growing healthcare company. Position Summary The Staff Manufacturing Engineer will provide process engineering and controls support to develop, transfer, optimize, and sustain manufacturing processes for medical device manufacturing in an ISO 13485 compliant setting. Ensure projects meet all required quality, cost, capacity and regulatory requirements while adhering to company policy and best industry practices. Key Accountabilities • Support Design Transfer from R&D to manufacturing: define processes, tooling, test methods, cell layout, and work instructions., • Develop and improve manufacturing processes and Work Instructions using continuous improvement methodologies., • Own NC/CAPA records related to production components/processes and drive corrective and preventative action plans to completion., • Build business cases to implement new technologies and applications which streamline business processes, including Machine Learning, Artificial Intelligence tools, record digitization, automated test data collection, vision systems, ect., • Establish working relationships with component manufacturers and provide technical feedback as required., • Documentation & training: create process documentation, training materials, and guide technicians/operators through implementation., • Design test methods to ensure process/product quality., • Provide technical direction and leadership to project team members in investigation and experimentation efforts aimed at practical applications of scientific theories or principles, • Provide technical leadership to product development team, • Provide support as a Subject Matter Expert during internal/external audits for Quality and Regulatory Compliance., • Provides complex design reviews and feedback for improvements in manufacturability. Education, Experience & Skills • Bachelor’s degree in Industrial, Mechanical, Electrical, Software Engineering, or a related field preferred; equivalent direct experience will also be considered., • Typically 4–8 years’ experience with mechanical/electrical manufacturing processes, including assembly and testing., • Medical device manufacturing experience., • Experience leading cross functional project teams or supervising staff is desirable., • DFMEA (design failure mode effect analysis) principles, PFMEA (process failure mode effect analysis) principles, AFMEA ((application) failure mode effect analysis) principles., • Working knowledge of mechanical testing of systems, sub-systems, and components., • Knowledge of intellectual property fundamentals and legal processes for managing intellectual art. Physical Requirements • Sit or stand for 8-10 hours per day., • Lift up to 20 lbs. Location This position will be based in Madison, WI with ~10-20% domestic and international travel. Equal Opportunity Employer NeuWave Medical is an equal opportunity employer. We are committed to creating an inclusive environment and do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

Job Description Join Realta Fusion as a Mechanical Designer ( Facilities / Process ) and play a key role in shaping the infrastructure behind next-generation fusion research. The Mechanical Designer will create detailed technical drawings and layouts for Realta's fusion research facilities and pilot plant infrastructure. This role supports the design and construction of specialized facilities housing fusion devices, including process piping systems, equipment layouts, utility distribution, and building infrastructure. You will work closely with facilities engineers, mechanical engineers, and project managers to translate design concepts into accurate, construction-ready drawings. The ideal candidate has strong CAD skills, understanding of industrial facilities and piping systems, and thrives in a fast-paced environment where attention to detail directly impacts construction quality and project timelines. Realta Fusion is a rapidly growing start-up developing compact magnetic mirror fusion energy systems to address the biggest challenge of our time – tackling global climate change while ensuring a sufficient energy supply for at least ten billion people on (and off) earth. We are building a team with diverse talents dedicated to making fusion energy a real solution to humanity’s most pressing problem. Key Responsibilities Technical Drafting & Documentation • Create detailed 2D and 3D drawings for process piping systems, equipment layouts, and facility infrastructure, • Develop piping isometric drawings, P&IDs, and equipment arrangement drawings for fusion facilities, • Produce architectural and structural drawings for research buildings and pilot plant facilities, • Generate utility distribution drawings including electrical, HVAC, compressed gases, and cooling water systems, • Create as-built drawings documenting field changes and final configurations, • Maintain drawing revision control and ensure compliance with company standards Design Support & Coordination, • Support facilities engineers in developing equipment layouts and space planning for fusion devices, • Coordinate with mechanical, electrical, and structural disciplines to resolve interface conflicts, • Review vendor drawings and equipment submittals for dimensional accuracy and integration, • Assist in clash detection and 3D coordination using BIM/modeling tools, • Participate in design reviews and provide input on constructability and layout optimization Project Execution, • Work from engineering sketches, markups, and verbal instructions to produce final drawings, • Meet project deadlines and deliverable schedules for construction and procurement packages, • Incorporate engineering change orders and field modifications into drawing sets, • Support permitting submittals with required drawings and documentation, • Follow applicable codes and standards for piping, pressure vessels, and industrial facilities (ASME B31.3, ANSI, AWS), • Ensure drawings meet industry standards for clarity, accuracy, and completeness, • Maintain organized file structures and CAD libraries for reusability Required: • Associate degree in Drafting Technology, CAD Design, or related technical field; or equivalent vocational training, • 3+ years of drafting experience in industrial facilities, process plants, or research facilities, • Experience with process piping systems, equipment layouts, and facility design, with a strong familiarity of process piping and instrumentation components and specifications, • Proficiency in CAD tools (AutoCAD Plant 3D or similar) and experience with 3D modeling software (Revit, Inventor, SolidWorks, or similar), • Understanding of piping design, isometric drawing generation, and P&ID interpretation, • Familiarity with industrial equipment layouts and building systems, • Knowledge of drafting standards and best practices for industrial facilities, • Experience with Revit MEP or BIM coordination tools (Navisworks, BIM 360), • Experience with cost estimating databases and methodologies, • Background in research facilities, cleanrooms, or specialized industrial environments, • Familiarity with high-purity piping systems, vacuum systems, or cryogenic systems, • Understanding of electrical distribution, HVAC systems, or fire protection systems, • Experience with permit sets and construction documentation, • Knowledge of utility infrastructure and site civil design What we are working on is hard… and hugely important. Realta Fusion is assembling a talented team bound together by a passion to solve humanity’s biggest challenge with first-of-a-kind technology. Additionally, Realta offers: • Competitive compensation package, including equity stock options, • Comprehensive benefits including health, dental, and vision insurance, plus a 401(k), • Flexible paid time off (PTO) to support work-life balance

Job Description We are seeking a highly skilled Solar Project Manager to oversee the entire electrical construction process of solar energy projects from initial bid to final completion. This role will involve balancing responsibilities between the office and the project site while ensuring project efficiency, profitability, and effective communication with both clients and field teams. As a Solar Project Manager, you will serve as the primary liaison between our company and the client, providing leadership and support to electricians and low voltage technicians. Your ability to navigate pre-construction activities, manage project schedules, negotiate materials, and ensure compliance with safety and code standards will be vital to the project’s success. Our applications and resume submissions are carefully reviewed and vetted by a real person, without the use of AI or automated technology. Each submission receives personalized attention to ensure a thorough and thoughtful evaluation. Key Responsibilities: Estimating and Proposal Preparation: • Estimate a variety of project delivery methods, including Plans and Specifications, Design Build, and Conceptual Estimating., • Perform quantity takeoffs as required, request, evaluate, and secure equipment and subcontractor quotes., • Review and compile project pricing using the company’s proprietary software and labor/material database., • Develop and maintain relationships with targeted customers to generate project opportunities., • Participate in business development activities aligned with company strategy., • Engage in social, civic, and trade activities to enhance company visibility and goodwill., • Oversee the entire pre-construction and construction process, ensuring the project meets contractual requirements., • Maximize project profitability by negotiating material/equipment purchases and managing labor costs., • Work with project foreman to plan, schedule, and engineer the work for optimal value., • Handle project correspondence and manage all aspects of project delivery., • Perform monthly job cost projections and advise on project billings., • Assist in the creation of solar installation designs and construction documents with the in-house Electrical Engineer., • Interpret and develop single-line diagrams for solar installations., • Be familiar with the project’s manpower, tools, equipment, and permitting requirements., • Work with utility companies and permitting agencies, understanding utility rates, the interconnection process, and relevant solar rebates/incentives., • Have a strong knowledge of Solar Equipment (Modules, Inverters, Racking) and Battery Energy Storage Systems (BESS)., • Ensure compliance with the National Electrical Code (NEC), specifically Articles related to solar installations., • Experience with commissioning and programming of solar equipment., • 3+ years of experience in solar or electrical construction project management, with a focus on solar energy systems., • Construction experience is preferred, especially in the electrical or renewable energy sector., • Strong understanding of solar equipment (modules, inverters, racking) and related electrical systems., • Ability to interpret architectural, structural, and civil drawings for design and implementation., • Excellent problem-solving skills and ability to make independent decisions., • Ability to foster and maintain positive relationships with electricians, clients, architectural/engineering firms, and general contractor personnel., • Solid knowledge of utility rates, interconnection processes, solar rebates, and incentives., • Familiarity with Battery Energy Storage Systems (BESS) and Vehicle Charging Stations., • Strong understanding of industry standards, procedures, and the National Electrical Code (NEC); NABCEP Certification is preferred., • Excellent written and verbal communication skills., • Ability to manage multiple priorities and projects effectively., • Strong organizational and time management skills., • Ambitious with a strong work ethic, team-oriented, and a positive attitude., • Ability to represent company interests with intelligence, assertiveness, and confidence.Company DescriptionFounded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.Founded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.

Job Description This is a hybrid role in Maple Grove, MN or Madison, WI Do you want to be a vital part of a successful multi-disciplined team? At Cybertrol, you will apply your skills in a culture that focuses on commitment to high quality solutions for our customers while emphasizing personal and professional growth for our employees. Our core values are reflected in everything we do. Our dedication to being "Passionate," "Authentic," and "Willing to Help" makes a significant impact on our work culture and the success of our projects. ABOUT CYBERTROL Cybertrol Engineering creates and delivers custom-engineered automation hardware and software solutions to manufacturing customers throughout the upper Midwest and across the world. The firm is privately owned, headquartered in Minneapolis, and has additional offices in Madison and Marshfield, WI. There is an extraordinarily strong engineering culture that emphasizes both personal and professional growth along with a commitment to providing high-quality solutions, including: plant-wide automation, information, and industrial OT (Operational Technology) infrastructure; custom control panel design and fabrication; and upgrades of obsolete automation systems. JOB SUMMARY The Senior Network Engineer will be responsible for several different tasks to accomplish OT’s mission including, but not limited to, the setup and installation of virtualized micro-datacenters, the design and deployment of plant-wide industrial networks, and the configuration of software for handling concerns such as thin client management, backups, cybersecurity, and devops pipelines. As a Senior Engineer, you will be expected to provide value beyond being an individual contributor by providing technical direction, mentoring, coaching, and supporting company-wide initiatives. Up to 25% travel may be required to support our client’s industrial networks, incident response, and network assessments. A valid driver’s license is required. ESSENTIAL JOB FUNCTIONS • Work within cross-functional teams including Automation Engineering, Hardware Design, and Software engineers to deliver comprehensive project deliverables, • Work directly with Cybertrol’s customers to define OT-related project requirements and help design OT network-based solutions, • Communicate effectively with project team members for status, deliverables, and technical needs, • Manage configuration and commissioning of industrial datacenters, including hardware and network equipment, • Responding to urgent network-related incidents, • Perform site operational technology assessments, develop site assessment reports, and provide recommendations for improvement, • Create system documentation for both internal and external audiences, • Assist with proposal generation and estimating, • Mentor and support junior engineers, • Contribute to company-wide initiatives, • Refine and implement OT standards REQUIRED EDUCATION AND EXPERIENCE • Bachelor degree in Computer Science, Engineering, or other IT/OT-related field and 7+ years of professional experience or 10+ years of directly relevant professional experience, • Relevant experience within an industrial/manufacturing OT environment, • Expert-level knowledge of and Associate or higher-level certifications held with VMware, Cisco, Windows Server, cybersecurity, and industrial hardware/software DESIRED EXPERIENCE • Familiarity with Rockwell Automation products a plus PHYSICAL REQUIREMENTS & WORKING CONDITIONS Office Work: • Office desk/cubicle environment, • Overnight travel from a few days to several days at a time. Travel duration rarely exceeds twelve days in a row, • Work around construction equipment and personnel, • Work around production equipment and production personnel, • Work in hot or cold areas, • Work in noisy areas, • Work up and down stairs, indoors and outdoors, • Working and interfacing with operations, engineering, equipment supply, and construction personnel Typical Personnel Protective Equipment (PPE) Required: Safety Glasses, Steel Toed shoes, hearing protection, and electrical safety PPE. Employees must comply with customer specific requirements and PPE. Work may include working weekends, holidays, nightshift, and extended hours to meet deadlines and commissioning requirements. Occasionally on-site work can be 12+ hours/day. Cybertrol offers a discretionary bonus to all employees, based on company and personal performance. In addition, all full-time employees are eligible for a variety of benefits including health insurance coverage, life and disability insurance, 401(k), paid holidays and personal paid time off (PTO), supplemental insurance plans, and education reimbursement. Cybertrol is committed to equal employment opportunity for all applicants and employees. Applicants will receive consideration for employment regardless of veteran status, race, color, religion, sex, marital status, national origin, physical or mental disability, age and/or any other protected status as required by law.

Job Description Own the system-level vision that turns first-of-a-kind fusion hardware into a cohesive, scalable reality—leading the integration of breakthrough science and engineering on the path to commercial fusion energy. The Head of Systems Engineering will lead the systems engineering function at Realta Fusion, establishing technical requirements, driving system integration, and ensuring our magnetic mirror fusion devices meet performance, safety, and operational objectives. This senior technical leadership role demands expertise in complex system architecture, requirements management, and integration of multidisciplinary subsystems. You will bridge plasma physics, mechanical, electrical, nuclear, and controls engineering teams to ensure coherent system design and successful execution from experimental devices through commercial deployment. The ideal candidate combines deep systems engineering expertise with strategic leadership, thriving in a first-of-a-kind hardware environment where disciplined systems thinking directly impacts our ability to deliver commercial fusion energy. Realta Fusion is a rapidly growing start-up developing compact magnetic mirror fusion energy systems to address the biggest challenge of our time – tackling global climate change while ensuring a sufficient energy supply for at least ten billion people on (and off) earth. We are building a team with diverse talents dedicated to making fusion energy a real solution to humanity’s most pressing problem. Key Responsibilities Systems Architecture & Requirements • Define and maintain system architecture for fusion devices across experimental, pilot, and commercial product lines, • Establish and manage technical requirements from physics performance through operational, safety, and regulatory constraints, • Lead system decomposition and allocation of requirements to subsystems and components, • Develop and maintain interface control documents across mechanical, electrical, plasma, and control systems, • Lead system integration activities ensuring subsystems work together to meet top-level requirements, • Define verification and validation strategy including analysis, testing, inspection, and demonstration, • Oversee commissioning and acceptance testing of fusion devices and major subsystems, • Manage technical reviews (PDR, CDR, TRR) ensuring design maturity and readiness, • Build, lead, and mentor systems engineering team (initially 2-3, scaling to 8-12), • Establish systems engineering processes, tools, and best practices for fusion development, • Recruit systems engineers with experience in complex hardware integration, • Partner with plasma physics to translate physics requirements into engineering specifications, • Work with mechanical, electrical, nuclear, and controls leads to ensure integrated system design, • Coordinate with operations on maintainability, operability, and lifetime performance requirements, • Provide systems engineering support to experimental campaigns and pilot plant development programs, • Lead technical risk assessment and develop mitigation strategies for system-level risks, • Support project management with integrated schedules, technical dependencies, and critical path analysis, • Represent systems engineering capabilities to investors, partners, and technical stakeholders, • Collaborate with national laboratories and research institutions on systems engineering best practices for fusion Education & Experience • BS in Systems Engineering, Aerospace Engineering, Mechanical Engineering, or related technical discipline. Advanced degree preferred, • 15+ years systems engineering experience in complex hardware programs (aerospace, defense, energy, accelerators, research facilities), • 5+ years leading systems engineering teams or serving as chief engineer on major programs, • Deep expertise in systems engineering processes including requirements management, functional analysis, interface management, and V&V, • Strong understanding of mechanical, electrical, and control systems to facilitate integration across disciplines, • Proficiency with systems engineering tools (DOORS, Cameo, modeling and simulation), • Experience with Model-Based Systems Engineering (MBSE) approaches, • Knowledge of systems safety analysis (FMEA, fault trees, hazard analysis), • Proven ability to lead technical teams and influence across organizational boundaries, • Strong analytical and problem-solving skills with systems-level thinking, • Excellent communication skills translating between technical specialists and executive leadership, • Experience making critical technical decisions with incomplete information and competing constraints Compensation & Benefits What we are working on is hard… and hugely important. Realta Fusion is assembling a talented team bound together by a passion to solve humanity’s biggest challenge with first-of-a-kind technology. Additionally, Realta offers: • Competitive compensation package, including equity stock options, • Comprehensive benefits including health, dental, and vision insurance, plus a 401(k), • Flexible paid time off (PTO) to support work-life balance

Job Description Johnson Health Tech (JHT) is expanding its innovation efforts in hearing technology and is seeking a Senior Product Owner to help shape the next generation of hearing device solutions. This role sits within JHT’s global R&D organization and plays a key role in defining how new hearing technologies are brought to life. Working closely with engineering, audiology, marketing, and business leaders, including the SyncLync team, this individual will translate product vision into actionable development plans that guide engineering teams from concept through delivery. This is a high-impact product leadership role focused on innovation, cross-functional collaboration, and delivering meaningful advancements in hearing technology. Position Overview: Reporting to Johnson Health Tech’s R&D organization, the Senior Product Owner will translate product strategy into clear development priorities and guide cross-functional teams in delivering hearing device features and capabilities. This individual will work closely with product managers, engineers, and global stakeholders to define minimum viable products (MVPs), manage development backlogs, and ensure teams build features that deliver the highest value to customers and the business. Success in this role requires strong communication, strategic thinking, and the ability to navigate complex technical development environments while maintaining alignment across multiple stakeholders. Key Responsibilities: Product Strategy & Vision Translation • Translate product vision into clear feature definitions, user stories, and tactical development plans, • Collaborate with product managers and business partners to shape product strategy and long-term roadmaps, • Help define minimum viable product (MVP) scope and prioritize features based on business value and customer needs. Agile Development Leadership • Own and manage the product backlog, including grooming, prioritization, and refinement, • Ensure development teams have clear requirements, acceptance criteria, and success metrics, • Work closely with engineering, audiology, marketing, quality, and manufacturing teams to ensure alignment, • Facilitate communication between business stakeholders and development teams, • Monitor key performance indicators (KPIs) and ensure product features meet quality and performance expectations, • Evaluate feasibility, cost implications, and development tradeoffs during product planning, • Support product launches by coordinating testing, training, and operational readiness Team Leadership & Mentorship • Mentor team members and contribute to product development best practices, • Promote strong collaboration and alignment across global teams, • Bachelor’s degree in Engineering, Computer Science, Information Systems, or a related field, • MBA or advanced degree preferred Experience • 7+ years of experience as a Product Owner or Product Manager working within Agile development environments, • Proven experience translating product vision into development requirements and backlogs, • Experience working closely with engineering teams delivering complex technology products, • Knowledge of electrical hardware systems or system integration is a plus Skills & Leadership Attributes • Strong communication and stakeholder management skills, • Ability to influence cross-functional teams and align diverse groups around shared goals, • Excellent analytical, organizational, and problem-solving abilities, • Comfortable making decisions and prioritizing work in fast-moving development environments, • Strong experimental mindset and ability to drive innovation amidst uncertainty Additional Details • Based in Cottage Grove, WI, • Reports directly to JHT VP of R&D, • Ability to travel domestically and internationally (~4x per year), • Willing to collaborate across global time zones

Job Description People + Problem Solving = Progress Excellence Through People! Take your engineering career to the next level by working with energetic, talented, and forward-thinking colleagues and clients who invest in the collective good, take a balanced approach to sustainable solutions, are flexible to the realities of complex changes, and provide genuine effort to do the right by others. Who We Are: PSE is an electrical energy expert that provides relationship-driven engineering and consulting services for forward-thinking partners who pursue long-term energy solutions. Check out our website at: What We Are Looking For: As a Senior Energy Storage Electrical Engineer, at PSE in our Madison, WI, St. Paul, MN or Denver, CO, office, your primary responsibility will be to assist in the delivery of multidisciplinary Energy Storage System (ESS) projects through their feasibility, pre-construction, and construction phases with a specific focus on the electrical design aspects of projects. We seek a creative, intelligent, entrepreneurial, and driven individual who enjoys a fast-paced and challenging environment. This is an exciting opportunity to join a growing team and a culture that promotes continual employee growth and development. What You Will Be Doing: • Core Values: Embrace, uphold, and live out PSE’s core values around People, Problem-Solving, and Progress., • Lead the design and engineering efforts of energy storage projects and the integration of energy storage in microgrids and other distributed energy resources projects., • Evaluate and analyze energy storage technologies, products, and vendors, and support clients with technology and vendor selection and implementation., • Support developers, utilities, and other clients with identifying, defining, and implementing use-cases for energy storage systems, • Working Knowledge of sizing energy storage systems and techno-economic modeling using DER-CAM, UL Homer, and others., • Develop code compliance documentation for energy storage projects using NFPA 855, NFPA 70, and UL9540/A, including developing hazard mitigation analysis, fire response plans, and operation and maintenance procedures., • Experience with energy storage in both utility-scale and/or large industrial facilities, including the following design types, is strongly preferred: battery technology/ chemistry selection, battery sizing, one-line development, site arrangements, inverter selection, cable ampacity calculations, grounding, protective relaying, and associated systems design and construction administration., • Serve as PSE’s Subject Matter Expert on all things Energy Storage., • Assist in Leading and developing a high-performing team of engineers and technicians through mentorship., • Act as a company representative at industry conferences, seminars, and networking events to enhance visibility, build relationships, and stay informed on industry trends., • Develop and publish technical articles, white papers, and presentations to showcase expertise, contribute to thought leadership, and support business development efforts. What You Will Need: Education and Experience • Bachelor’s degree in electrical engineering with Power Systems Focus, • 5+ years’ experience working in the electrical engineering industry with a minimum of 2+ years, specifically in the energy storage electrical engineering industry., • PE (Professional Engineer) Licensure or the ability to get one within a year., • Experience working in commercial & industrial electrical engineering a plus, • Master’s degree in electrical engineering a plus, • NABCEP certification or willingness to get one. Knowledge and Skills • Experience with AutoCAD, PVsyst, SKM, ETAP, and SEL Relays., • Experience with industry-standard design codes, such as NEC, International Building Codes, International Fire Codes, and other relevant standards., • Working knowledge of applicable NEC, NESC, IEEE, and ANSI standards is highly preferred., • Excellent written and verbal communication., • Strong project management skills and ability to prioritize work and resources, • Possess the ability to achieve quality results, be change-oriented, foster innovation, and be a continuous learner., • Possess the ability to continually identify and recommend process and/or system improvements to facilitate efficiencies., • Strong interpersonal skills and ability to apply effective verbal and written communication skills when writing specifications, preparing technical reports, contributing to, or leading project team discussions, • Ability to travel as needed (up to 5%) for team meetings, client consultations, site assessments, and construction inspections – occasional overnight travel may be required. Compensation: Benefits: • Discretionary annual performance-based profit-sharing bonus, • 401(k) retirement plan and employer safe harbor contribution, • Cell phone reimbursement, • Comprehensive health, health savings account (HSA), dental, vision, flexible spending account (FSA) & dependent care reimbursement account, • Life insurance, short & long-term disability, and other voluntary coverages, • Employee Assistance Program (EAP), • Paid time off, including holidays and volunteer time off (VTO) to serve our communities., • Professional development opportunities and educational assistance PSE is an equal opportunity employer that encourages all its employees to grow, learn, and expand their roles in ways they can be creative and best accomplish the client’s needs. We assess qualified applicants without regard to race, color, religion, sex, disability, sexual orientation, gender identity, national origin, veteran status, and other legally protected characteristics. Disclaimer: We are committed to fairness and transparency in our hiring process. Compensation may be adjusted based on the candidate’s experience, education, qualifications, market conditions, and internal equity. PSE (Power System Engineering) We want you to grow. We want you to learn. We want you to expand with us.

Job Description Who we are: Build your career with Boldt. As a member of the Boldt team, you’ll collaborate with some of the most knowledgeable professionals in the construction industry. You’ll have the chance to learn new skills and seek greater responsibilities with a team that builds real value in the world around you. You’ll succeed in a workplace culture that recognizes, respects, and values differences. Boldt’s focus on innovation, collaboration, and employee development provides an opportunity for all our employees to Build Boldly. What you get to do (Essential Functions): • Business Development, • Involvement with project pursuits from initial client contact., • Provide feedback on design effort and assist in the development of our proposals., • Create and/or oversee the creation of presentation drawings for proposals., • Lead site survey/field investigation as required., • Work with clients to create preliminary design documentation, including space programming., • Develop and manage the creation of plan and specification documents with minimal assistance from senior staff., • Initiate and lead internal and external project progress meetings and follow up with the necessary documentation and action., • Research and review products, materials, and building assemblies for selection and incorporation into the project design., • Collaborate with and oversee other design disciplines (electrical, HVAC, structural, etc.) as needed., • Perform necessary design analysis and calculations to confirm compliance with applicable codes and regulations., • Participate in and lead client and project presentations., • Attend and lead site visits and OAC progress meetings during construction., • Serve as the construction administrator during the construction phase, as required., • Review and approve shop drawings and respond to requests for information during construction., • Identify and resolve key and unique issues, considerations, and/or deficiencies as the project progresses., • Perform quality assurance reviews on all drawings and design documents for assigned projects., • Establish, oversee and manage project schedule, scope, and budget., • Secure agency approvals as required for building permitting., • Assist with the management of client and contractor relations., • Participate in and lead team, client, and department meetings., • Participate in the development and maintenance of architectural and engineering standards for Boldt specifications, drawing format, administrative procedures, and quality control measures., • Mentor and coach junior staff., • Stay updated with industry trends, technologies, and best practices., • Bachelor’s degree in Architecture., • Seven or more years of related design experience in the industrial and manufacturing industries, including knowledge of construction technology, design, applicable codes, regulations, standards, and other applicable expertise is required., • Hold a valid architectural license., • NCARB Accreditation is preferred., • Experience managing projects at all phases of design and construction, coordinating engineering, dealing with permitting, and communicating and working with contractors and clients., • Proficient with computer aided drawing software including Revit, AutoCAD, Sketchup, Bluebeam Revu, and other related systems (experience with project rendering is a plus)., • Project management knowledge and be proficient with software programs such as Microsoft Word, Outlook, Excel, and Power Point., • Ability to follow internal processes and procedures to ensure financial accuracy. Maintains consistent standards that minimize risk to project and company profits., • Up to 10% travel is required for conducting worksite visits. While performing the duties of this job, the employee is frequently required to remain in a stationary position for up to eight hours. The employee occasionally is required to move to access people or workspaces. Constantly operates a computer and other office equipment, such as a calculator, copy machine and computer printer. The ability to effectively communicate is required. The employee may occasionally move up to 15 pounds. The working conditions of this position requires the employee to work inside an office environment. The environment for which this position functions may contain scents and fragrances. May be requested to work overtime and weekends. What we can offer you: • As an employee-owned organization, we pride ourselves on fostering a culture centered around safety and team collaboration. We offer a comprehensive benefits package designed to support the well-being and growth of our employees. Our benefits include:, • Medical Coverage: Comprehensive medical plans including dental and vision benefits as well as the opportunity to participate in HSA and/or FSA programs., • Life Insurance & Disability Coverage: Short-Term Disability, Long-Term Disability, and Group and Voluntary Life Insurance., • Paid Time Off: Generous vacation, sick leave, and paid holidays., • Financial Benefits: An Employee Stock Ownership Plan (ESOP) to share in the company’s success, as well as a 401(k) plan., • Annual Bonus Program: Opportunity for annual bonuses based on company performance., • Wellness Resources: Access to a health coach, health assessments, wellness challenges, and life care resources., • Professional Growth: Equal access to opportunities and resources at all levels, educational reimbursement, and a robust mentorship program., • Inclusion & Belonging: Comprehensive diversity, equity, and inclusion training programs. The Boldt Company is an equal opportunity employer. If you are an individual with a disability and you need accommodation or other assistance during the application process, please contact our Human Resources department. Based on Boldt’s Background Checking policy, this position may be subject to a background check. The Boldt Company does not accept unsolicited resumes from third party recruiters.

Job Description Johnson Health Tech (JHT) is expanding its hearing technology innovation efforts and is hiring an Electrical Engineering Manager to help shape the next generation of hearing device platforms. This role sits within JHT’s global R&D organization and plays a critical part in advancing electrical architecture, embedded systems, and hardware performance across hearing initiatives. In close collaboration with SyncLync and other strategic business units, this leader will help build scalable, forward-thinking technology that drives the industry forward. This is a high-impact engineering leadership role focused on innovation, technical rigor, and long-term platform development. Position Overview: Reporting directly to the Vice President of R&D, the Electrical Engineering Manager will lead the electrical engineering function for hearing device development programs. They will translate product requirements into detailed technical execution plans, drive system architecture decisions, and guide projects from early concept through validation and production. This role partners daily with product marketing, audiology, industrial design, quality, suppliers, and manufacturing to ensure designs meet performance, regulatory, cost, and timeline objectives. The ideal candidate combines strong hardware expertise with strategic thinking, challenging conventional design approaches while delivering reliable, manufacturable solutions. Key Responsibilities: Technical Leadership & Architecture • Lead electrical engineering design and development of advanced hearing device systems, • Translate product requirements into detailed technical roadmaps and execution plans, • Drive architecture decisions across analog/digital hardware, embedded systems, and wireless communication, • Ensure designs meet performance, regulatory, manufacturability, and end-use standards, • Evaluate emerging technologies and patents to inform product strategy Innovation & Industry Advancement • Challenge legacy design assumptions in hearing device architecture, • Identify opportunities for performance optimization, miniaturization, and system integration, • Balance breakthrough innovation with practical production realities, • Contribute to long-term platform strategy across hearing product lines Team & Organizational Leadership • Recruit, mentor, and develop high-performing engineering talent, • Provide clear technical direction and remove development roadblocks, • Foster a culture of ownership, accountability, and curiosity, • Coach engineers to deliver high-quality results within structured development processes Project & Cross-Functional Execution • Lead multiple projects through structured phase-gate development, • Manage timelines, resources, and engineering budgets, • Partner daily with global teams across R&D, marketing, suppliers, manufacturing, and quality Education • Bachelor’s degree in Electrical Engineering from an ABET-accredited institution (required), • Advanced engineering degree preferred Experience • 10+ years of electrical hardware design experience, • 5+ years of demonstrated technical leadership, • 5+ years leading complex electrical hardware or embedded system development projects, • Experience interpreting patents and evaluating technical IP, • Working knowledge of hearing aid architecture strongly preferred Technical Expertise • Analog and digital hardware design, • Embedded systems and microcontrollers, • Wireless and digital communication protocols, • System-level integration across hardware and firmware, • Experience supporting products through manufacturing and production Leadership & Mindset • Passionate about product development and innovation, • Entrepreneurial thinker within a structured R&D environment, • Visionary yet grounded in execution, • Comfortable operating in ambiguity, • Strong cross-functional communicator, • Willing to challenge norms while building consensus Additional Details • Based in Cottage Grove, WI, • Reports directly to JHT VP of R&D, • Ability to travel domestically and internationally (~4x per year), • Health & Dental Insurance, • Company paid Life Insurance, • 401(k), • Paid Time Off benefits, • Product discounts, • Wellness programs, • Relocation Assistance

Job DescriptionCompany Description TOMRA Food designs and manufactures sensor-based sorting machines and integrated post-harvest solutions for the food industry, using the world's most advanced grading, sorting, peeling and analytical technology. The company's mission is to enable its customers to improve returns, gain operational efficiencies, and ensure a safe food supply via smart, useable technologies. TOMRA Food is a member of the TOMRA Group founded in 1972 that began with the design, manufacture, and sale of reverse vending machines (RVMs) for automated collection of used beverage containers. Today TOMRA provides technology-led solutions that enable the circular economy with advanced collection and sorting systems that optimize resource recovery and minimize waste in the food, recycling, and mining industries. This role is within the TOMRA Food division. At TOMRA, we want people to innovate, exhibit passion in their work and be responsible. We encourage the freedom to innovate and take risks that result in breakthroughs that challenge the status quo. We thrive off passion that always focuses and commits to meeting success. We demand a responsible and safe mindset that takes care of our customers, products and fellow employees. Job Description The Field Service Engineer is responsible for delivering exceptional technical support, maintenance, installation, and customer training services for TOMRA's cutting-edge food sorting equipment. This role aims to ensure the seamless operation of TOMRA's solutions, maximize equipment performance and enhance customer satisfaction. Primary Job Functions • Perform field service work at customer sites which includes installation, commissioning, testing, integration, optimization, maintenance and repair, ensuring full functionality according to machine specifications., • Perform all mechanical, electrical, electronic and optical tuning and setup., • Analyze, evaluate and diagnose equipment; troubleshooting machine problems through to resolution., • Perform preventative maintenance including preseason service, postseason service and enhancing ongoing performance of machines., • React in a prompt and professional manner to customer machine issues in the field. Where an easy fix is not possible, ensure customer is well informed of the next steps and potential costs., • Address customer complaints and if necessary, escalate to appropriate stakeholders., • Maintain close relationships and work collaboratively with engineering, research & development, sales, customer solution delivery and other internal stakeholders for continuous improvement activities, to advise on any potential sales opportunities and to successfully complete projects. Contribution and collaboration is vital whether its research and development site testing, refurbishment, refitting, upgrades or new installs, all projects require teamwork., • Act as the voice of the customer in the value chain to improve products systems and services, by reporting on feedback and comments received in the field leadership, research and development, or sales., • Assist with training and development of new Field Service Engineers, as requested., • Instruct and train customers on operation of machine, utilization and required maintenance of the systems., • Manage and control tools, test equipment, technical documentation and other assigned equipment., • Embrace related assignments and responsibilities as required to contribute to the overall success of the team., • Promote a “Safety First” culture throughout the company, our customers, and our industry.Qualifications, • An Associate's degree in electrical, electronic, automation, mechanical, mechatronics, sustainable manufacturing, or industrial engineering is preferred or combination education and equivalent experience is accepted., • Relevant knowledge of electronics/electrical assembly and wiring., • Strong understanding / knowledge of electronics and electrical assembly and wiring., • Proven to read, analyze and interpret technical procedures and/or governmental regulations., • Assist and support customers in a professional manner, • Ability to establish and maintain effective working relationships with customers, internal and external associates and management, • Excellent communication skills and the ability to deal effectively with customers in the English language as necessary., • Competent with Microsoft Office – Word, Excel and Outlook, • Two plus years’ experience in field service and customer support., • Two plus years’ experience in PC building, repairing and diagnostic testing., • Two plus years’ experience in installing software on PC’s., • Experience with packaging and or printing machinery a plus, • Experience engaging with customers in a service delivery environment, • Experience in electronic system troubleshooting a plus., • Working knowledge of basic analog and digital circuits, electrical power circuits, PLC circuits., • Working knowledge of basic test equipment such as oscilloscopes and voltmeters., • Knowledge of computer hardware and configurations., • Ability to work in Food processing plants, farms, cold storage facilities, and outside in high/low temperatures., • Willing to travel for at least 70% of the time, domestic and internation travel based on a flexible schedule; includes weekends and/or holiday travels., • Ability to drive without restrictions in residency country. Additional Information Pay Band For U.S. applicants, in accordance with applicable disclosure requirements, the anticipated hourly base pay range for this position is $26.00 to $35.00 per hour. The actual salary offer will carefully consider a wide range of factors, including your skills, qualifications, experience and location. Why work for us: Be part of a mission to transform how we all obtain, use and reuse the planet’s resources to enable a world without waste. We love innovation, a collaborative environment where idea sharing and thinking outside the box is encouraged. What we offer: • Comprehensive medical, dental, and vision plans with 100% employee premium coverage, • 31 days of PTO annually (vacation, sick, and holidays), increasing with tenure, • 401(k) with 100% match on the first 4% of your contributions, • 8 weeks of fully paid parental leave for eligible employees, • Up to 4 days of paid bereavement leave to support employees during personal loss, • Employee Assistance Program supporting mental, emotional, and financial well-being, • Inclusive culture that values diversity, well-being, and teamwork TOMRA is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines.

Job Description Arnold Magnetic Technologies – Technology Center At the Arnold Magnetics Technology Center, we design and build high-performance electric motor components for some of the most demanding applications in the world — from aerospace and defense to motorsport and academic research. Our Technology Center is a small, fast-moving engineering lab where ideas become working prototypes. We’re looking for an Assembly Technician who enjoys precision work, creative problem-solving, and seeing their craftsmanship come to life in cutting-edge hardware. What You’ll Do • Hands-On Assembly & Fabrication, • Perform stator coil insertions, lamination stacking, and permanent-magnet assembly., • Assemble, test, and debug prototype and pre-production components., • Use hand tools and precision instruments (micrometers, calipers, Gaussmeters, Fluxmeters, etc.) to verify tolerances and performance. Process & Documentation • Follow and improve assembly and testing work instructions according to quality standards., • Record build data, test results, and observations with high attention to detail. Collaboration & Continuous Improvement • Work closely with other engineers to refine designs and manufacturing methods., • Design or modify tooling and fixtures to support prototype builds., • Participate in design reviews and provide hands-on feedback from the build process. What We’re Looking For Required • 2- or 4-year technical degree or equivalent hands-on experience., • Skilled at working with small components and fine wiring within tight tolerances., • Demonstrated craftsmanship, precision, and pride in producing high-quality work., • Comfortable reading drawings and technical instructions., • Familiarity with electromagnetic assemblies, motor winding, or electrical testing., • Curiosity about how things work and eagerness to learn new techniques., • Previous experience in manufacturing, assembly, or R&D environments. Why Join Us • Be part of a small, innovative team where your work directly contributes to next-generation electric motor technology., • Collaborate with experienced engineers in a dynamic prototyping environment., • Work on mission-critical projects across aerospace, defense, and motorsport industries. Working Conditions • Manufacturing environment with exposure to running machinery. Physical Requirements • Level of travel required: <5% - This involves customer visits for product discussions., • Could require intermittent and long periods of sitting and/or standing., • Periodic lifting of materials and files not to exceed 40 pounds. #CORP Arnold Magnetic Technologies is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Minority/Female/Sexual Orientation/General Identity/Disability/Veteran

Job Description Job Summary: Westphal & Co., Inc. is seeking a detail-oriented and skilled Estimator to join our PreConstruction team. The Estimator will be responsible for the quantitative analysis (takeoff), summarization, and bid preparation of prospective projects. This position reports directly to the Vice President of PreConstruction and plays a crucial role in delivering accurate, competitive bids that contribute to the overall success and growth of the company. Our applications and resume submissions are carefully reviewed and vetted by a real person, without the use of AI or automated technology. Each submission receives personalized attention to ensure a thorough and thoughtful evaluation. Key Responsibilities: Estimating & Cost Control: • Perform complete and accurate takeoffs of plans, ensuring they are completed in a timely manner., • Have a thorough understanding of industry standards, materials, procedures, and the National Electrical Code (NEC)., • Utilize the company’s estimating software to prepare and refine project estimates., • Propose value engineering suggestions for each project to enhance efficiency and cost-effectiveness., • Refine estimates prior to bid submittal to ensure accuracy and competitiveness., • Understand the project’s design, risks, competition, key players, and other factors critical to bid preparation., • Minimum of two years of estimating experience, preferably in the electrical contracting field., • Strong knowledge of commercial, industrial, and solar projects., • Experience using estimating software and tools to create detailed bids., • Engineering degree or relevant certifications are preferred., • In-depth knowledge of industry standards, procedures, and the National Electrical Code (NEC)., • Strong attention to detail and ability to prioritize tasks in a fast-paced environment., • Strong written communication skills and professional telephone etiquette., • Ability to analyze complex problems, devise solutions, and make independent decisions., • Experience in performing sales and marketing efforts on behalf of the company., • Strong ambition to achieve personal and professional goals., • Demonstrates high ethical standards, integrity, and honesty in all interactions., • Positive attitude, strong work ethic, and collaborative team mindset., • Excellent listening skills, assertiveness, and confidence when representing company interests., • Innovation-driven with a commitment to finding new ways to improve processes and outcomes. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to sit; use hands to finger, manipulate, handle, or feel; and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 15 pounds. Specific vision abilities required by this job include close vision and ability to adjust focus. Work Environment: Work is performed in an office environment with low to moderate noise levels. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Company DescriptionFounded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.Founded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.

Job Description Title: Civil Engineering Intern Department: Engineering Reports to: Director, Civil Engineering Location: Madison, WI or Seattle, WA FLSA Status: Non-Exempt Pay: $25/hr Company Overview: OneEnergy Renewables develops and delivers greenfield utility-scale solar energy facilities across the United States. OneEnergy's mission is to make clean energy the number one electricity choice for consumers and utilities. Powered by the belief that the future will run on clean energy, its team works collaboratively with landowners, communities, and utility companies to deliver breakthrough clean energy facilities. OneEnergy has regional offices in Wisconsin, Oregon, Colorado, and Maryland, with its headquarters in Seattle, Washington. About the Position: The Civil Engineering Intern adeptly manages multiple engineering efforts with competing deadlines and resources. This role works cohesively and collaboratively across companywide functional teams to include development, engineering, accounting, financial planning, and legal. The position reports to the Director, Civil Engineering and will based full-time throughout the summer in either our Madison, WI or Seattle, WA offices. This position shall be focused on assisting in the designing of utility-scale and distributed generation solar energy facilities site civil features including grading plans, pile placement and elevation plans, hydrological engineering, stormwater management plans, and Storm Water Pollution Prevention Plans (SWPPP). All site design features need to meet or exceed Conditional Use Permits requirements, building permit conditions and other site requirements. Responsibilities: • Assist in the design the civil engineering features for a large-scale solar array including grading design, access roads, attachment means and modifications to support structures, • Collaborate with the electrical engineering team on optimizing array layouts across different topographical or site challenges, • Formatting drawing plansets and maintain AutoCAD template files and Complete redlines based on reviews from Engineers, Developers and local AHJ, • Review and interpret Geotechnical Reports as well as Wetland Delineation Reports, • Produce cut/fill plans and quantities using AutoCAD Civil3d to ensure the solar array meets the maximum slope tolerance of the mounting system and optimizes the foundation material expenses, • Participate in the development of the Stormwater Pollution Prevention Plan (SWPPP), erosion and dust control measures for the Project, • Read, interpret, and understand project documentation with a focus on fulfilling all the permit and site requirements with value driven designs, • Enrolled in a BS Degree in Civil or Environmental Engineering from an ABET accredited university, • Exposure to AutoCAD Civil 3D preferred, • Exposure to HydroCAD preferred, • HEC-RAS or Flo2D modeling experience preferred but not required, • Experience with Google Earth or other mapping/GIS tools, as well as the use of online and public resources such as federal/state/county databases, • Hands-on experience in construction or land development, • Strong attention to detail with a high level of integrity and organizational capacity to manage time and prioritize, • Self-motivated with proven ability to take ownership, initiative, and accountability, • A proven ability to provide efficient, timely and reliable service to internal and external stakeholders, • Ability to contribute to an amicable team working environment, • Keen analytic, organization, and problem-solving skills, • Ability to travel and access sites of varying Position may require frequent travel., • Must have a "roll up your sleeves and let's get the job done right" type attitude, • Commitment to Diversity, Equity and Inclusion, • Demonstrated qualities of integrity, credibility, and professional responsibility

Job Description Position Summary The Head of NBI Development leads Realta Fusion's Neutral Beam Injector R&D team, driving the design, analysis, and integration of NBI systems and subsystems for our magnetic mirror fusion devices. This senior technical leadership role demands deep scientific and engineering expertise, proven ability to lead multidisciplinary teams, and the vision to translate physics requirements into manufacturable, reliable hardware. The ideal candidate combines hands-on technical credibility with strategic leadership, thriving in a fast-paced environment where engineering decisions directly impact our path to commercial fusion energy. The Head of NBI Development owns the NBI roadmap from experimental devices through pilot plant and commercial deployment. Company Overview Realta Fusion is a rapidly growing start-up developing compact magnetic mirror fusion energy systems to address the biggest challenge of our time – tackling global climate change while ensuring a sufficient energy supply for at least ten billion people on (and off) earth. We are building a team with diverse talents dedicated to making fusion energy a real solution to humanity’s most pressing problem. Key Responsibilities Technical Leadership & Strategy • Define and execute the technical roadmap for NBI systems across all company devices and future commercial applications, • Identify technology gaps between current capabilities and commercial fusion requirements, particularly for steady-state operation, • Lead make-vs-buy decisions for NBI components and subsystems based on technical maturity, cost, and schedule, • Establish design standards, qualification procedures, and configuration management practices for NBI systems, • Represent Realta in external collaborations with national laboratories, universities, and NBI technology suppliers Team Leadership & Development • Own the performance, reliability, and availability of all NBI systems across company experimental devices, • Lead troubleshooting of system failures and drive root cause analysis to prevent recurrence, • Develop and implement preventive maintenance programs to minimize unplanned downtime, • Optimize NBI operating parameters to maximize plasma heating efficiency and experimental productivity, • Ensure safe operation and regulatory compliance for high-voltage systems and radiation-producing equipment NBI System Procurement & Deployment • Serve as technical lead for external NBI procurement contracts and vendor partnerships, • Manage technical specifications, delivery schedules, and acceptance testing for purchased NBI systems, • Oversee commissioning activities and development of operational procedures for new NBI installations Advanced NBI Development • Lead internal R&D programs for novel NBI technologies required for steady-state fusion operation, • Drive development of high-duty-cycle ion sources, neutralizers, and thermal management solutions, • Evaluate emerging technologies including negative ion sources, RF ion sources, and advanced accelerator designs, • Manage prototype development, testing, and validation of next-generation NBI subsystems, • Develop cost models and manufacturing strategies for commercial-scale NBI production Team Leadership & Cross-Functional Coordination • Build and manage NBI scientific team including ion source specialists, beamline scientists, and diagnostics experts, • Coordinate with experimental physics teams to align NBI capabilities with plasma heating requirements, • Work with project management to maintain schedules, budgets, and risk mitigation plans for NBI programs, • Collaborate with Director of Fusion Facilities on NBI infrastructure and safety requirements, • Partner with mechanical and electrical engineering teams on NBI system integration, • Ensure documentation, knowledge capture, and lessons learned across all NBI activities Qualifications: Education & Experience • Advanced degree in physics, nuclear engineering, electrical engineering, or related field, • 15+ years experience in NBI system or accelerator beamline development, • 5+ years leading teams of 5+ people, • Track record delivering complex systems from concept through commissioning Technical Expertise • Deep expertise in neutral beam injection systems, ion sources, or related particle accelerator technologies, • Track record of managing complex experimental systems in fusion, accelerator, or plasma research environments, • Experience with NBI diagnostics, beam optics modeling, and performance analysis Leadership & Execution • Proven ability to lead, mentor, and develop high-performing scientific teams, • Strong communication skills across technical and business audiences, • Demonstrated success solving first-of-a-kind technical challenges, • Comfortable in fast-paced startup environments with incomplete information and schedule pressure Compensation & Benefits What we are working on is hard… and hugely important. Realta Fusion is assembling a talented team bound together by a passion to solve humanity’s biggest challenge with first-of-a-kind technology. Additionally, Realta offers: • Competitive compensation package, including equity stock options, • Comprehensive benefits including health, dental, and vision insurance, plus a 401(k), • Flexible paid time off (PTO) to support work-life balance, • Work and live in Madison, Wisconsin — one of America’s most livable and vibrant cities We value diversity as a critical factor in innovation and believe a diverse team is necessary to solve the toughest problems. We aim to create an inclusive environment that unleashes the full creativity of our team members from a wide variety of backgrounds and experiences. We provide equal employment opportunities to all individuals based on merit and without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected status under applicable laws.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: The Telecom Commercial Premise Technician - Level IV - required to perform detailed site surveys, installation, integration, and testing of Customer Premise fiber systems and routers with minimum supervision. Core Responsibilities: • Must have mastered installation skills and testing per Telco Standards and be able to perform all the duties of the Level IV requirements with a high degree of competence and accuracy., • Mastered comprehensive equipment installation skills on a wide variety of fiber system installations and performed system testing and integration., • Knowledge and experience with transport equipment including Ciena, Fujitsu, Cisco, Nortel, Nokia, DELL, Juniper, etc., • Deep understanding of fiber installation standards and procedures., • Ability to read and follow Method of Procedures, order specifications, floor plans, equipment, and wiring documentation., • Responsible for the accuracy of all documentation as required., • Ability to interface with customers, vendors, and other company employees in the completion of, testing of, and turning up of equipment. Turn up and Integration system testing skills required., • Elevated level of understanding of all company policies and practices, safety procedures, paperwork, and administrative requirements. Will review subordinate's time and expense documentation for accuracy and completeness., • Comply with system update requirements of all company/customer installation documents., • Ability to resolve any project related issues utilizing defined processes., • Read, understand, and apply job/equipment specifications, installation documents, schematics, and test records. Demonstrated proficiency in generating MOP's, High-risk activity reports, work schedules, test records, and project completion reports., • Physically place, remove, or modify working and non-working equipment., • Install Cable trays and/or racking from drawings and Engineering documents., • Install Telecommunications equipment in cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, firewalls as required., • Identify, label, measure, terminate and physically route the cables that supply AC and/or DC power or transmit data in various technical spaces., • Conduct testing and document performance characteristics of hardware and software; determine efficiency, reliability, and compatibility with existing system., • Perform test and turn-up as well as other integration activities., • Resolve equipment and technical issues as they arise., • Perform quality validation on in-process and completed work. Core Experience: • Minimum 5+years' installation experience or combination of experience and training as determined by company management. Prior leadership experiences required. Verizon Commercial Premise Installation experience a plus!, • High school diploma with two years technical school or a combination of training and experience related to telecommunications field installations., • Ability to apply common sense understanding to conduct instructions furnished in written, oral, or diagram form. Ability to deal with problems involving variables in standardized situations., • Must have proficient laptop computer skills and experience with applications., • Ability to fully understand all company/customer policies and procedures and safety requirements., • Excellent verbal and written communication skills., • MS Office (Outlook, Word, Excel, Teams) skills. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Travel required in your home region utilizing a company vehicle. Must be able to work a variety of shifts and travel with overnight stays, if required. Expenses are 100% paid by the employer. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$65,000—$75,000 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. WHAT YOU WILL EXPERIENCE IN THIS ROLE: As a CAD Designer at nVent Management Company, you will play an integral role in our engineering projects. Your expertise will be critical in transforming project specifications, sketches, or notes into precise and accurate working plans and detailed drawings. This position offers an outstanding opportunity to contribute to world-class engineering solutions and to be part of a team that values flawless execution and outstanding build standards. \n • Prepare clear, complete, and accurate working plans and detailed drawings according to project specifications.\n, • Build final drawing packets following Trachte job specifications to ensure consistency in build standards, dimensions, scaling, and CAD operations.\n, • Make adjustments or changes as requested by customers or the Project Manager.\n, • Apply CAD software (SolidWorks) and equipment to build technical drawings.\n, • Maintain job logs and historical references to support project tracking and documentation.\n, • Support a collaborative work environment that encourages pride in the product and values individual contributions.\n, • Perform other duties as assigned.\n\n YOU HAVE: \n • The candidate must have an associate or bachelor's degree in Drafting Technology, Industrial Technology, Engineering, or a related field. Alternatively, 5 years of proven experience may replace the degree requirement.\n, • Proven understanding of SolidWorks or Creo or equivalent experience is strongly preferred.\n, • Familiarity with Microsoft Office products.\n, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.\n, • Ability to write routine reports and correspondence and speak with groups of customers or employees of the organization.\n, • Physically fast paced activities are very limited in this role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.\n\n WE HAVE: • nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation.\n, • We encourage and support the philanthropic activities of our employees worldwide\n, • Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money\n\n\n, • Innovative & adaptable\n, • Dedicated to absolute integrity\n, • Focused on the customer first\n, • Respectful and team oriented\n, • Optimistic and energizing\n, • Accountable for performance\n\n\n, • Benefits to support the lives of our employees\n Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: \n • Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance.\n, • A 401(k) retirement plan and an employee stock purchase plan - both include a company match.\n, • Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection.\n\n At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth. #LI-JH1 #LI-Hybrid

Job Description Arrowhead Pharmaceuticals, Inc. (Nasdaq: ARWR) is a clinical stage biopharmaceutical company that develops medicines that treat intractable diseases by silencing the genes that cause them. Using a broad portfolio of RNA chemistries and efficient modes of delivery, Arrowhead therapies trigger the RNA interference mechanism to induce rapid, deep, and durable knockdown of target genes. RNA interference, or RNAi, is a mechanism present in living cells that inhibits the expression of a specific gene, thereby affecting the production of a specific protein. Arrowhead's RNAi-based therapeutics leverage this natural pathway of gene silencing. Arrowhead is focused on developing innovative drugs for diseases with a genetic basis, typically characterized by the overproduction of one or more proteins that are involved with disease. The depth and versatility of our RNAi technologies enables us to potentially address conditions in virtually any therapeutic area and pursue disease targets that are not otherwise addressable by small molecules and biologics. Arrowhead is leading the field in bringing the promise of RNAi to address diseases outside of the liver, and our clinical pipeline includes disease targets in the liver and lung with a promising pipeline of preclinical candidates. Arrowhead's corporate headquarters is in Pasadena, CA with research and development teams in Madison, WI & San Diego, CA, and a state of the art manufacturing facility in Verona, WI. Our employees are nimble, science-driven innovators who are collaborating to bring new therapies to patients in need. The Position This position works closely with Quality Assurance, Laboratory, and Manufacturing staff to complete and oversee Arrowhead's maintenance and calibrations for controlled Equipment. This position will follow safe work requirements including wearing appropriate PPE and following safe work practices and the safe work permit program. This position will maintain asset records and document the completion of work in Arrowhead's regulated asset management system. This position may be required to write minor equipment change controls and initiate deviations in Arrowhead's quality management system. This position will also include vendor management. Responsibilities • With growing independence perform calibration to NIST standards and maintenance on manufacturing, analytical, and process control systems, including, but not limited to:, • Manufacturing equipment and processes., • Analytical laboratory equipment and processes., • Manage monthly assignments to reliably complete routine and non-routine maintenance and calibration tasks on time. Resolves roadblocks independently or with experienced team members and escalates complex issues for support., • Have knowledge and ability to perform a growing set of routine maintenance and calibration tasks of moderate complexity, including multi-step techniques with growing independence., • Perform non-routine maintenance with a degree of independence. Recognize unusual circumstances and communicates findings for support. Collaborate with manager and subject matter experts on problem solving and approaches to complex problems. including drafting of Equipment Qualification Reports (EQRs), and asset induction of new equipment., • Monitor process utility performance, including regular monitoring and testing to ensure reliable performance., • Interface with regulated asset management system to track equipment statuses, document accurate work records, update asset records, and create calibration certificates following good documentation practices., • Support vendors who are on-site performing services, including oversight of work documentation., • Growing knowledge in safety programs. Independently follows safe work procedures and identifies when the safe work permit process applies to new situations. Collaborate with cross-functional teams to complete a hazards assessment and the permitting process. Completes permits for approval., • Begins to recommend new approaches or techniques to current and new practices. Makes recommendations and supports teams with continuous improvements., • Associate or Bachelor's Degree in mechanics, electronics technology or similar field, and 4 years of experience in a laboratory/manufacturing calibration role. (Equivalent High School and work experience will be considered), • At least 2 years of work experience with pharmaceutical laboratory/good manufacturing processes. (cGMP), • Must have basic skills in reading and understanding engineering drawings, • Knowledgeable with LOTO (lock out tag out), • Experience with controlled documentation (SOP/WI), • Proficient in Microsoft Office Word, Excel, PowerPoint, and similar software, • Developing technical writing skills with high attention to detail, • Good verbal and written communication skills, • Follow written procedures and work instructions with attention to detail, • Adhere to manufacturing and laboratory safety policies and procedures, • Calibration experience and repair with general lab equipment, • Experience working on and troubleshooting automated systems., • Awareness of change control practices for equipment and computer systems., • Experience working with Blue Mountain or other Quality Management Systems, Regulatory Asset Management Systems., • Experience with safe work permits including hot work, line breaks, and working in electrically classified areas. All applicants must have authorization to work in the US for a company. California Applicant Privacy Policy

Job Description At Westphal & Co., Inc., a Senior Project Manager oversees the entire electrical construction project from the initial bid to final completion, all while working to increase efficiency and profitability as the project progresses. A Senior Project Manager serves as the professional liaison between our company and the client and is also the primary support person for our field forces. Senior Project Managers serve as mentors and trainers to other Project Managers while maintaining a portfolio of projects themselves. Business development activities and the willingness to participate are important as well. Accomplishing these tasks is achieved by having a well-balanced amount of time spent in the professional office setting, the project site, and at external events. The Senior Project Manager reports to the Project Executive. Responsibilities include: Estimating Westphal & Company estimates projects of all types, and the ideal candidate would possess the ability to estimate the following types of delivery methods: • Plans and Specification., • Design Build., • Conceptual Estimating., • Perform quantity takeoffs as required. Request, receive, and evaluate major equipment and subcontractor quotes as required. Review quantities and totals for pricing., • Seek cost effective methods of construction used by field staff and project managers for inclusion in future estimates., • Secure most favorable material and other cost quotations., • Become proficient with the company’s estimating software. Check calculations and compile them to point of proposal. Use company proprietary labor and material database when preparing estimates., • Ability to lead and manage an estimate from cradle to grave., • Review and comment on estimates prepared by others., • Assist the Project Executive in developing win strategies. Business development is a key component to the complete Senior Project Manager at Westphal & Company. Candidates should possess the ability or desire to perform the following: • Develop targeted customers by fostering a relationship that results in getting project opportunities., • Participate in activities that fall in line with the company’s business development plan., • Establish and promote contacts with potential and/or past clients to obtain work. Pursue new markets for the company’s services and coordinate efforts with the Project Executive. Managing projects at Westphal & Company require a Senior Project Manager to follow our detailed system of processes which includes the following: General Duties • Oversee the pre-construction process., • Understand the project’s contractual requirements., • Maximize project profitability., • Negotiate major material/equipment purchases., • Work with the project foreman to lay out, plan, schedule, and engineer the work to create the highest value for the company., • Handle all correspondence relating to the construction project., • Assist in managing the project’s labor force and personnel., • Monitor project productivity and profitability, take corrective steps as needed., • Attending scheduled meetings relating to the project., • Be familiar with the project’s manpower, equipment, and tool requirements., • Advise and perform monthly billings., • Review and assist Project Managers with monthly cost projections., • Assist the Project Executive in project cost reviews and as needed related to mentoring and training Project Managers., • Assist on an as-needed basis in the solution of difficult construction and management problems or discussions with clients on project problems., • Excellent written skills and telephone etiquette, • The ability to analyze problems and solve them., • The ability to make independent decisions., • The ability to communicate well with, have the respect of, and develop positive relationships with:, • Electricians, • Architectural and Engineering firms, • General Contractor personnel, • Clients, • Other teammates, • Perform sales/marketing efforts on behalf of the company., • Ambition to attain personal and professional achievements., • Honesty, integrity, overall standard of ethics, • A positive attitude, work ethic, and ability to work as part of a team., • The ability to listen., • Intelligence, assertiveness, and confidence when representing company interests., • A desire to innovate., • Efforts on behalf of the company’s strategic plan and achieving company’s goals., • Have a thorough knowledge of industry standards, procedures, National Electrical Code, etc.Company DescriptionFounded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.Founded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.

Job DescriptionSalary: Are you a dynamic leader ready to drive high-impact commercial design projects from concept to completion? Axiom Consultantsa 100% employee-owned firm and part of Ruekert & Mielkeis seeking a Project Manager to join our growing team. This position is ideal for an experiencedproject manager, coordinator, or job captain with a background in engineering, architecture, or construction, and a broad-based planning, design, and construction skillset in the development and construction of sites and buildings. Youll coordinate and manage in-house multidisciplinary engineering teams and work closely with architectural subconsultants to deliver thoughtful, efficient solutions for our clients. In this role, youll independently manage a variety of large-scale commercial and private design projects across Iowa, Eastern Illinois, and Wisconsinfrom planning and due diligence to construction closeout. Youll be the driving force behind schedules, coordination, and quality, ensuring smooth collaboration between in-house engineers and architectural partners. At Axiom, youll take on challenges that demand critical thinking, emotional intelligence, and a forward-thinking approachwhile growing as part of a team that truly values employee ownership. Available Locations: Waukesha, WI Madison, WI Green Bay, WI Racine, WI What Youll Gain: • Project variety & leadership experience across commercial, private, and institutional sectors, • A collaborative, people-first culture that encourages creativity, mentorship, and flexibility, • A strong foundation for long-term professional growth and ownership Goals & Responsibilities This position includes, but is not limited to, the following duties and responsibilities: • Lead multi-disciplinary project teams from planning through construction closeout, • Develop and manage design proposals, contracts, and project schedules, • Coordinate internal engineering teams and external consultants from a variety of disciplines including architectural consultants, • Direct deliverables throughout all design phases (SD/DD/CD), • Manage client relationships and lead regular progress updates and construction meetings, • Ensure QA/QC of plan production and specifications (MasterFormat 3-Part), • Oversee permitting, contractor coordination, and owners representation services, • Administer construction documents: RFIs, submittals, ITCs, pay apps, and punch lists, • Participate in business development and support strategic firm growth Qualifications & Skills The ideal candidate for this position will possess the following education, experience, and abilities: Required: • Associates Degree in a related field, • Valid Drivers License, • Experience with: Bluebeam Revu, Microsoft Project, OneNote, Word, Excel, Outlook, PowerPoint, • Knowledge of the engineering and architectural design process, permitting, construction, and municipal standards, • Proven experience in team leadership, spec writing, and client coordination, • Exceptional communication, organizational, and problem-solving skills, • Bachelors Degree (or higher) in Engineering, Architecture, or a related discipline, • Familiarity with ProCore, Submittal Exchange, FieldWire, and ComCheck, • Working knowledge of civil, structural, mechanical, and electrical engineering concepts, • Understanding of the International Building Code and commercial construction standards, • Experience in architectural/interior design coordination Benefits Axiom Consultants is proud to be 100% employee owned. Our flexible working environment, engaged culture, and in-depth training and mentoring program are just a few of the reasons why we are consistently named the Best Engineering Company of the Corridor (Iowa City Cedar Rapids metro area). We offer a highly competitive compensation program and unique benefits, including: • Employee stock ownership plan, • Performance bonuses, • Extra hours bonuses, • Remote/flexible hours, • Generous personal time off and holiday programs, • Health, dental, vision, life, dependent life, and disability insurance, • 401(k) and Roth 401(k) with employer match, • Flexible spending accounts, • Prepaid legal services, • Employee Assistance Program, • Tuition reimbursement About Us Axiom Consultants Axiom Consultants, a Ruekert & Mielke company, is a 100% employee-owned engineering firm recognized for its innovative approach to serving commercial, residential, and institutional markets. We provide full-service engineering, including comprehensive planning, design, construction services, project management, and owners representation. As a six-time finalist and five-time winner of the Best Engineering Company of the Corridor (Iowa City Cedar Rapids metro area), Axiom has earned a reputation for excellence, responsiveness, and efficiency. Our employee-centric culture fosters collaboration, mentorship, and professional growth, empowering our team to deliver high-quality work while maintaining a strong work-life balance. Visit to learn more. Ruekert & Mielke, Inc. Ruekert & Mielke, Inc. is a 100% employee-owned civil engineering firm that has been empowering clients and employee owners to thrive since 1946. Together with our family of firms, Axiom Consultants and Outland Design, we tackle engineering challenges for a diverse set of clients across multiple sectors including government, agriculture, and real estate. Our team of engineers, environmental scientists, and technology experts work as an extension of our clients, offering exceptional planning, design, and construction management services. Combining experience, vision, and innovative technology, R/M serves as a trusted infrastructure ally to help make community possible. Visit to learn more. Learn how you can make community possible as an employee owner at R/M!Watch Video

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Are you a skilled and highly motivated Generator Technician who is looking to learn and grow in a fast-paced, challenging job in the Telecom industry? If so, Pearce has a career for you! Our Generator Technicians service and repair commercial generators on cell phone towers in your region. This role is a great match for independent, self-starters who are willing to travel. Core Responsibilities: • Maintaining generators, diagnosing and repairing problems, installing and replacing components or entire systems, and performing additional maintenance or upgrades on out-of-season equipment, • Conducting performance checks and regular maintenance on generators to ensure proper readiness, reading and following blueprints or other design specifications to install or repair, • Install fuel and water supply lines, pumps, electrical wiring and controls, and other components, and test for proper operation, • Be responsible for responding promptly/timely to Power/Generator alarms; have the ability to be on call 24/7 if necessary and respond promptly in answering assigned phone and email Core Experience: • Two or more years of experience with generator maintenance is preferred and a minimum of one year of intense work-related experience with generator and electrical maintenance-related software, hardware, and processes, • Thorough knowledge of generator installations, maintenance, and repair of Generators; knowledge of electronic, mechanical, and electrical components; moderate computer skills At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This position requires lifting over 50 pounds, stooping, bending, kneeling, squatting, climbing, and standing for long periods of time, • Must have the ability to inspect and/or troubleshoot equipment/alarms effectively, both visually and audibly, • Must be willing and able to drive long distances, workday, evening, or night hours; overtime, emergency callouts, weekends, and holidays as required; must assume 24-hour on-call duty when assigned and be gone from home for extended periods of time In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description As a BIM Project Specialist, you will be responsible for supporting the design, coordination, and execution of Building Information Modeling (BIM) processes specifically for plumbing systems. You will work closely with engineers and designers to develop detailed Revit models, ensuring that mechanical, electrical, and plumbing systems are accurately represented and well-coordinated within the project. Your role will contribute to enhancing project efficiency, collaboration, and overall quality. As part of EUA, a fully integrated architecture and engineering firm, BIM coordination is crucial in facilitating seamless collaboration across disciplines. Our holistic approach to design requires accurate and efficient coordination between HVAC, plumbing, electrical, structural, and architectural systems, ensuring that all elements of a project are aligned from concept through to completion. Key Responsibilities • Plumbing Modeling: Create, manage, and maintain detailed Revit models for plumbing systems, from design development through to detailed documentation. Ensure that all models comply with industry standards and project specifications., • BIM Coordination for MEP: Lead coordination efforts between plumbing systems with other building systems. Facilitate and lead coordination and clash detection meetings with internal teams and external consultants using tools such as Navisworks and ACC BIM360. Ensure timely resolution of clashes and conflicts by working closely with all project stakeholders to deliver coordinated, conflict-free designs., • Design Support: Assist in the virtual design and layout of plumbing systems, providing support for system sizing, routing, and space management., • Standards and Quality Control: Ensure adherence to BIM execution plans (BEP), managing project-specific BIM standards for plumbing systems. Perform regular quality control checks on models to maintain accuracy and alignment with project goals., • Knowledge of EUA Standards: Ensure all plumbing models adhere to EUA's internal standards and best practices, maintaining consistency, sustainability, and accuracy across all projects. Your work will reflect EUA’s commitment to high-quality, integrated design and engineering excellence., • Training and Support: Provide technical support to engineers and designers on Revit and BIM processes related to plumbing systems. Conduct training sessions on best practices and advanced features in Revit., • Accurate and Coordinated MEP Models: Ensure that plumbing Revit models are fully coordinated with other building systems, free from significant clashes, and meet project requirements., • Improved System Design: Provide accurate and efficient design and coordination of plumbing systems, ensuring optimal performance, space utilization, and ease of installation., • Effective Coordination and Clash Resolution: Lead coordination and clash detection meetings, ensuring that all design conflicts are identified early and resolved efficiently. Streamline interdisciplinary collaboration to minimize delays and enhance project delivery., • Optimized BIM Processes: Continuously refine and optimize EUA’s BIM processes for plumbing systems, contributing to improved project timelines and quality outcomes., • Two- or four-year degree in Architectural Technology or Engineering Technology, • Unlicensed / May pursue designer certification. CPDT preferred but not required., • 5-10+ years of experience with Revit and BIM tools in a plumbing context., • Proficiency with Navisworks, Revit, Dynamo, and other relevant BIM software., • Experience leading coordination meetings, performing clash detection, and resolving design conflicts., • Knowledge of plumbing design principles, codes, and standards., • Strong problem-solving skills, attention to detail, and ability to work within multidisciplinary teams., • Excellent communication skills and the ability to mentor others on BIM/VDC processes related to plumbing., • Has a proactive approach to projects and problem solving and can self-direct project work, tasks, and process improvements., • Assists in on-site observation and documentation., • Pay range for this position is $70,000 to $95,000 depending on experience

Job Description Drive the execution of high-impact, first-of-a-kind projects, leading multidisciplinary teams to turn ambitious technical vision into delivered results. The Senior Technical Project Manager will drive successful delivery of multidisciplinary engineering and research projects. This role requires an innate sense of urgency, a strong technical background, exceptional organizational skills, and the ability to lead teams of physicists, engineers, and external partners. The Sr. Technical Project Manager will ensure project alignment with company milestones while maintaining a culture of accountability, credibility, and collaboration. *exact title is TBD and dependent upon successful candidate’s experience Realta Fusion is a rapidly growing start-up developing compact magnetic mirror fusion energy systems to address the biggest challenge of our time – tackling global climate change while ensuring a sufficient energy supply for at least ten billion people on (and off) earth. We are building a team with diverse talents dedicated to making fusion energy a real solution to humanity’s most pressing problem. Key Responsibilities Project Leadership & Execution • Own end-to-end delivery of complex engineering and research projects ($1M-$50M) from concept through commissioning, leading teams of contributors across plasma physics, mechanical, electrical, nuclear, systems, and controls, • Make autonomous decisions on scope changes, resource allocation, and schedule adjustments; escalate strategic decisions with clear recommendations, • Drive critical path management and resolve bottlenecks threatening company milestones or investor commitments Strategic Planning & Stakeholder Management, • Partner with VP-level leadership to align project portfolio with business objectives, technical roadmap, and fundraising milestones, • Serve as primary interface with external partners including national labs, universities, DOE programs, and strategic vendors, • Manage multi-million-dollar vendor contracts, ensuring alignment with technical specifications and project timelines, • Provide executive-level updates to leadership and investors, translating technical progress into business impact, • Lead rapid response to technical setbacks, equipment failures, or experimental anomalies, • Develop comprehensive project documentation including integrated schedules, risk registers, budget tracking, and progress reports, • Lead technical design reviews and facilitate critical decisions, ensuring documentation and effective communication, • Conduct quantitative risk assessments and execute mitigation strategies protecting critical milestones, • Build and scale project management standards and best practices for fast-growing startup environment, • Bachelor's degree in engineering, physics, or a related technical discipline; advanced degree preferred., • 7+ years of experience in project management within a highly technical, hardware-intensive environment (energy, R&D, or engineering preferred)., • Demonstrated track record managing projects exceeding $1M in budget, • Proven experience leading multidisciplinary teams and managing complex technical deliverables., • Strong understanding of engineering design lifecycles, systems integration, and technical documentation., • Excellent organizational and communication skills; ability to simplify complex technical topics for diverse audiences., • Proficiency with project management tools (e.g., MS Project, Jira, Asana, or equivalent)., • PMP or similar certification is a plus. Compensation & Benefits What we are working on is hard… and hugely important. Realta Fusion is assembling a talented team bound together by a passion to solve humanity’s biggest challenge with first-of-a-kind technology. Additionally, Realta offers: • Competitive compensation package, including equity stock options, • Comprehensive benefits including health, dental, and vision insurance, plus a 401(k), • Flexible paid time off (PTO) to support work-life balance

Job Description Preconstruction Manager Company: Globalcom Technologies Position Summary The Preconstruction Manager plays a critical leadership role in Globalcom Technologies’ project acquisition and planning efforts. This position oversees all estimating and preconstruction activities for security and low-voltage technology projects and serves as the first point of contact for new pursuits. The Preconstruction Manager establishes project expectations through detailed budgeting, value engineering, stakeholder coordination, schedule planning, and procurement strategy. With strong technical expertise in ICT systems and exceptional attention to detail, this role ensures smooth project transitions from preconstruction to operations. Success requires the ability to manage multiple complex technology projects while maintaining strong relationships with clients, vendors, and internal teams throughout the preconstruction lifecycle. Key Responsibilities Estimating & Preconstruction Leadership • Lead estimating and preconstruction efforts for structured cabling, DAS, paging systems, clock systems, security, access control, video surveillance, intrusion detection, and integrated technology systems, • Coordinate preparation of project budgets and estimates from conceptual design through final contract value, • Develop and analyze cost models during design development and bidding phases, • Review and validate all estimates for labor, materials, equipment, and specialty system components, • Maintain and update historical cost data to support accurate estimating and competitive bidding Client Engagement & Business Development • Serve as the primary point of contact for all preconstruction communications with clients, general contractors, and end-users, • Build and maintain strong relationships with existing and prospective clients, • Support development and presentation of proposals, technical presentations, and qualification packages, • Participate in project feasibility reviews, risk assessments, and strategic decision-making, • Provide key input into RFP responses and proposal development strategies, • Attend business meetings, industry events, and technology trade shows to represent Globalcom Technologies Technical Coordination & Systems Design • Review construction documents, specifications, and system designs for accuracy and constructability, • Act as a technical advisor for value engineering, constructability reviews, and system optimization, • Evaluate system architecture and equipment specifications across all low-voltage and security systems, • Coordinate with engineers, consultants, and manufacturer representatives to ensure proper system integration, • Oversee BIM and 3D coordination efforts to support integration with building infrastructure and prefabrication opportunities Strategic Procurement & Vendor Management • Identify long-lead items and coordinate early procurement to support project schedules, • Build and maintain strategic relationships with manufacturers, vendors, and specialty subcontractors, • Evaluate material and system costs at design milestones and recommend procurement strategies, • Negotiate pricing, availability, and delivery terms with suppliers and technology partners, • Monitor industry trends, emerging technologies, and competitive pricing for low-voltage systems Schedule Management & Project Planning • Support development of preconstruction and construction schedules with project teams, • Identify schedule risks related to procurement, material lead times, and technology integration, • Manage document progression and coordinate submittal schedules with design teams and vendors, • Assist with identification of pursuit opportunities aligned with company strategy, • Track pursuit pipelines and provide reporting to leadership Project Transition & Handoff • Lead comprehensive transition meetings between preconstruction and operations teams, • Prepare detailed handoff documentation including scope summaries, equipment lists, risks, and special requirements, • Support operations teams during early execution phases to address outstanding issues, • Ensure continuity of client relationships and technical knowledge throughout project execution Process Improvement & Standardization • Lead standardization of preconstruction and estimating processes company-wide, • Maintain and improve templates, checklists, and procedures for estimates and proposals, • Identify and implement best practices to improve efficiency, accuracy, and consistency, • Lead training initiatives related to estimating, vendor systems, product updates, and client engagement Team Development & Leadership • Manage and supervise the estimating and preconstruction team, • Participate in recruiting, developing, and retaining top technical talent, • Provide mentoring, coaching, and performance feedback, • Foster a collaborative and growth-focused team environment Qualifications Required • Minimum 5 years of low-voltage project management experience with an electrical or technology contractor (ICT, structured cabling, RCDD-related work), • BICSI knowledge (recommended, not required), • Bachelor’s degree in Construction Management, Engineering, or related field, • Experience using estimating software and digital takeoff tools, • Strong knowledge of industry standards and best practices Key Competencies & Attributes • Exceptional attention to detail and ability to prioritize in a fast-paced environment, • Strong written and verbal communication skills with professional business etiquette, • Ability to analyze complex problems and make independent, informed decisions, • Experience supporting sales and marketing efforts, • Highly motivated with strong personal and professional ambition, • Innovation-driven mindset with a focus on continuous improvement, • Demonstrates integrity, ethical judgment, and honesty, • Confident, assertive, and professional when representing company interests, • Ability to align individual efforts with organizational strategy and long-term goalsCompany DescriptionFounded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.Founded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.

Job Description Position Summary Westphal & Co., Inc. is seeking a proactive and detail-oriented Project Manager to oversee electrical construction projects from bid through closeout. This role is responsible for driving project efficiency and profitability while serving as the primary liaison between clients, field teams, and internal stakeholders. The Project Manager will split time between the office and job sites to ensure successful project execution. All applications and resumes are reviewed by a real person. No AI or automated screening tools are used. Key Responsibilities Estimating * Prepare estimates for plans & specifications, design-build, and conceptual projects * Perform quantity takeoffs and solicit/evaluate vendor and subcontractor quotes * Secure competitive material and equipment pricing * Utilize company estimating software and proprietary labor/material databases * Review pricing strategies and construction methods to improve future estimates Business Development * Build and maintain relationships with current and prospective clients * Support business development efforts aligned with company goals * Collaborate with Project Executives to pursue new markets and opportunities * Represent the company through civic, social, and trade activities Project Management * Manage projects in compliance with contracts, industry standards, and NEC requirements * Oversee preconstruction through project closeout * Coordinate with foremen to plan, schedule, and staff projects efficiently * Monitor productivity, costs, and profitability; implement corrective actions as needed * Manage project correspondence, meetings, billings, and monthly job cost projections (WIP) * Negotiate material and equipment purchases Qualifications Required * Minimum 2 years of project management experience with an electrical contractor * Experience in commercial, industrial, and solar projects Preferred * Bachelor’s degree in construction management, engineering, or related field * Experience with electrical estimating software * Strong working knowledge of NEC and industry standards Key Competencies * Strong organizational skills and attention to detail * Clear, professional communication with clients, contractors, and team members * Ability to analyze complex problems and make independent decisions * Experience supporting sales and marketing efforts * High ethical standards, integrity, and professionalism * Results-driven, innovative, and aligned with company goals Working Conditions * Location: Madison, WI (office-based with occasional job site visits) * Schedule: Full-time, Monday–Friday; extended hours as business needs require * Physical Demands: Primarily sedentary; occasional lifting up to 20 lbs and site-related movement * Travel: Minimal * Technology: Daily use of Accubid, Microsoft Office (Excel, Word), and online compliance systems Company DescriptionFounded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.Founded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.

Job Description Position Summary Westphal & Co., Inc. is seeking an experienced and proactive Low Voltage Project Manager to lead low voltage construction projects from bid through closeout. This role is responsible for driving efficiency, profitability, and quality throughout the project lifecycle while serving as the primary point of contact for clients and field teams. The position requires a balance of office and on-site work to ensure successful execution. All applications and resumes are personally reviewed by our team—no AI or automated screening tools are used. Key Responsibilities Estimating • Prepare estimates for Plans & Specifications, Design-Build, and Conceptual projects, • Perform quantity takeoffs and obtain vendor and subcontractor pricing, • Evaluate costs and construction methods to improve future estimates, • Secure competitive material and equipment pricing, • Build and maintain relationships with targeted clients and industry partners, • Support business development efforts aligned with company goals, • Identify and pursue new markets and project opportunities, • Manage projects in compliance with contract requirements, NEC, BICSI, and industry standards, • Oversee pre-construction activities and project execution, • Coordinate with foremen to plan, schedule, and staff work efficiently, • Track productivity, costs, and profitability; implement corrective actions as needed, • Manage project communications, meetings, and documentation, • Oversee monthly billings, job cost projections, and WIP reporting, • Ensure proper allocation of labor, equipment, and tools Qualifications Required • 5+ years of low voltage project management experience with an electrical contractor (RCDD, Structured Cabling, ICT), • BICSI knowledge, • Bachelor’s degree in Construction Management, Engineering, or related field, • Experience with estimating software and bid preparation, • Strong knowledge of industry standards and procedures Key Competencies • Strong attention to detail and ability to prioritize in a fast-paced environment, • Clear written communication and professional business presence, • Ability to analyze complex issues and make sound, independent decisions, • Experience supporting sales and marketing efforts, • Results-driven with a strong desire for growth and improvement, • High ethical standards, integrity, and professionalism, • Confident, assertive, and effective when representing company interests, • Alignment with company goals and commitment to long-term successCompany DescriptionFounded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.Founded in 1931, Westphal & Co. is a full service electrical & technology contractor serving the Midwest and selected domestic markets from our headquarters in Madison, WI. Our primary markets include governmental, commercial, industrial, health care, and energy. We have both PE’s and RCDD’s on staff. The company performs work on everything from residential projects to the largest industrial projects. Our Globalcom Technologies division is a technology contractor specializing in structured cabling, security/CCTV, and cellular enhancement projects. In addition to construction, we also provide full preconstruction, design build services, Building Information Modeling (BIM), and prefabrication.

Job Description People + Problem Solving = Progress Excellence Through People! Take your career to the next level by working with energetic, talented, and forward-thinking colleagues and clients who invest in the collective good, take a balanced approach to sustainable solutions, are flexible to the realities of complex changes, and provide genuine effort to do right by others. What We Are Looking For: We’re seeking a Line Designer to join our team at our Madison, WI headquarters. We’re open to entry-level through experienced individuals. This role is a technical Subject Matter Expert position focused on electrical distribution design — a strong individual contributor who will own projects and serve as a trusted resource to internal teams and clients. What You Will Be Doing: • Embrace, uphold, and live out PSE’s core values around People, Problem-Solving, and Progress., • Design of overhead and underground electrical distribution systems, including sub-transmission line routing, ensuring compliance with utility standards and regulatory requirements., • Develop detailed construction drawings, system layouts, and technical specifications using GIS, CAD, and other engineering design tools., • Provide technical expertise and field support, resolving complex design issues, and ensuring projects are executed according to plan., • Conduct inspections and engineering analyses of existing distribution infrastructure to evaluate system integrity, reliability, and long-term performance., • Support infrastructure upgrades and capital improvement projects by managing cost estimates, schedules, engineering calculations, and cross-functional coordination. What You Will Need: Education and Experience • Bachelor’s Degree (BA) from a four-year college or university Engineering, Engineering Technology, Drafting/Design, or a related technical field preferred., • Relevant coursework or training in electrical distribution systems, CAD, and GIS is a plus. Knowledge and Skills • Strong understanding of overhead and underground electrical distribution and sub-transmission systems., • Proficiency with CAD and GIS software used for utility design and construction drawings., • Ability to read, interpret, and develop engineering drawings, specifications, and technical documents., • Knowledge of utility standards, safety regulations, and industry best practices. Compensation: Benefits: • Discretionary annual performance-based profit-sharing bonus, • 401(k) retirement plan and employer safe harbor contribution, • Cell phone reimbursement, • Comprehensive health, health savings account (HSA), dental, vision, flexible spending account (FSA) & dependent care reimbursement account, • Life insurance, short & long-term disability, and other voluntary coverages, • Employee Assistance Program (EAP), • Paid time off, including holidays and volunteer time off (VTO) to serve our communities, • Professional development opportunities and educational assistance PSE is an equal opportunity employer that encourages all its employees to grow, learn, and expand their roles in ways they can be creative and best accomplish the client’s needs. We assess qualified applicants without regard to race, color, religion, sex, disability, sexual orientation, gender identity, national origin, veteran status, and other legally protected characteristics. Disclaimer: We are committed to fairness and transparency in our hiring process. Compensation may be adjusted based on the candidate’s experience, education, qualifications, market conditions, and internal equity. PSE (Power System Engineering) We want you to grow. We want you to learn. We want you to expand with us.

Job Description Summary: The Installer (Recreation Equipment) is responsible for completing high quality installation services for recreation equipment and systems while performing individually or as a team member. This role always requires adherence to safety standards and effective collaboration. Essential Duties: Essential job duties for this position include the following items. Other duties must be performed as assigned or required. Site Preparation (10 %) • Assess and prepare the installation site according to project specifications., • Assemble and install recreation equipment, including Splashpads, Playgrounds, and Mini Golf Courses, following detailed plans and instructions., • Conduct thorough inspections of installed equipment to ensure it meets safety and quality standards., • Address any issues or defects promptly and report them to the Field Superintendent or Crew Lead., • Work toward continuous quality improvement., • Maintain accurate records of installation activities, including time logs, equipment used, and any issues encountered., • Interact professionally with clients and stakeholders on-site, addressing any questions or concerns they may have., • Participate in training sessions to stay updated on new installation techniques and safety protocols., • Share knowledge and best practices with team members to enhance overall performance., • Team Collaboration: Work closely with the Field Superintendent, Crew Lead, and other team members to ensure smooth project execution. Communicate effectively to coordinate tasks and resolve on-site challenges. This position requires frequent travel to various project sites, sometimes for extended periods. Overnight and weekend travel may be necessary during the construction season (March-November). Candidates must live within commuting distance of Verona, WI or St. Paul, MN. Supervisory Responsibilities: The Installer (Recreation Equipment) has no supervisory responsibility. Qualifications: To perform this job successfully, the individual in this position must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the minimum knowledge, skills and ability required. Education/Experience: • High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience., • AA/AS/BA/BS degree in Construction Management, Engineering, or a similar field (preferred)., • Ability to review, understand, and interpret construction plans and/or drawings., • Strong communication and problem-solving abilities., • Ability to read and interpret safety rules, operating instructions, and procedure manuals., • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write routine reports and correspondence., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to deal with problems involving several concrete variables in standardized situations., • Ability to type and use a mouse., • Must Possess a valid Driver's License, safe driving history, and have dependable transportation., • OSHA 10 certification (desired). Offer contingent on satisfactory findings related to background check to be conducted before start date.

Job DescriptionSalary: Ring & DuChateau is seeking a Senior Building Systems Design Engineer / Designer to join our Milwaukee team. This role is intended for an experienced professional who brings strong technical expertise in building systems design (telecommunications, overhead paging, intercom, nurse call, for example) and is ready to play a leadership role on complex projects. In this position, you will lead the design and coordination of integrated building systems that support safe, connected, and high-performing environments. You will work closely with project managers, architects, engineers, and clients, providing technical direction from concept through construction while mentoring junior staff and contributing to firm-wide standards and best practices. What Youll Do: • Lead the design and coordination of integrated building systems, including building technology, life safety, communications, and security systems., • Serve as the technical lead on assigned projects, providing direction on system strategy, design approach, and coordination., • Translate project goals and client requirements into coordinated, code-compliant design solutions., • Apply and interpret applicable building codes, standards, and industry best practices., • Oversee the development and quality of construction documents using Revit and AutoCAD., • Lead and participate in multidisciplinary coordination and BIM meetings., • Review and respond to RFIs and product submittals; support construction administration efforts., • Conduct site visits and field observations, resolving design issues and ensuring alignment with design intent., • Mentor and guide junior designers and engineers through technical review, coaching, and collaboration., • Contribute to the development of internal design standards, tools, and processes. What Were Looking For: • Bachelors degree in Architectural Engineering, Electrical Engineering, or a related discipline (preferred)., • 812+ years of experience in building systems, MEP, or technology systems design., • Demonstrated experience leading technical design on complex projects., • Advanced proficiency in Revit and AutoCAD., • Strong working knowledge of building codes, standards, and system integration., • Ability to manage priorities across multiple projects while maintaining quality and schedule., • Strong communication skills, including client and consultant coordination., • A collaborative, solutions-oriented leadership style., • Proficiency with Microsoft Office tools., • Industry certifications (such as RCDD) are not required but strongly supported and encouraged.

BS in Mechanical Engineering or Manufacturing Engineering and 4 to 7 years of experience in manufacturing is required. They are well known for their community-oriented culture and supportive work environment with top-notch professional development! You will report to the Engineering Supervisor. Wor

Mid-sized Madison general contractor is actively seeking a senior project manager to join their team as they have an extremely strong pipeline for 2026.This firm, specializing in a diverse array of commercial and industrial projects, is looking for a candidate who can run projects in the range of $8

You will collaborate with cross-functional teams—including industrial design, electrical engineering, manufacturing, and quality—to ensure products are not only functional and reliable, but also user-friendly and market-ready. Qualifications: Bachelor’s degree in Mechanical Engineering 3+ year

My client is looking for a hard-working and client-facing project manager to join their team.They have been operating in Madison for 40 years 90% of their work is with repeat clients, and they are looking to hire a project manager with a passion for nurturing client relationships.They believe in pro

Provide engineering support for continuous improvement, sustaining engineering, and customer-driven modifications. Create detailed 3D models and engineering drawings for stainless steel components, sheet metal parts, machined parts, and welded assemblies. Apply sound engineering principles to ensure

Participate in company training sessions Assure site superintendents maintain clean and safe sites Profile 7+ years commercial construction management experience Interest in interacting with clients/owners Estimating experience on commercial projects Easy-going, self-motivated, honest, and collabora

Educational Requirements: Education Level Field of Study Required/Preferred Bachelor's Degree, with Emphasis in project management, information technology, engineering, or related area.

Full-Time | Competitive Salary + Benefits.We are currently recruiting on behalf of a well-established and growing general contractor seeking an experienced Multifamily Project Manager to join their team in Madison, Wisconsin.This is an excellent opportunity for a driven construction professional wit

Basic electrical engineering principles. We're seeking a hands-on Mechanical Engineer to design, test, and improve rotating electrical connectors and motion control components used in industrial automation applications. This role partners with manufacturing, machine shops, and cross-functional engin

Be an instrumental part of a cohesive electrical and mechanical engineering team to collaboratively work on developing new products, troubleshooting problems, and achieving performance, reliability, and cost improvements. Basic knowledge of electrical engineering principles. Design, develop, and tes

S in Construction Management or Civil Engineering with 0+ years of experience. Terra Engineering & Construction Corporation is a civil construction company specializing in earth retention, drilling, deep foundations, dams, watercourse and marine work, underground utilities, excavating and gradin

Excellent oral and written communication skills, including PowerPoint Resumes If you've hired someone in a similar or the same position, what do you like to see on a candidate resume? Work experience with companies? Technology, proven experience.

Terra Engineering & Construction Corporation, an employee-owned company, has an opportunity for a Project Manager/Estimator based out of Madison, WI. S in Civil Engineering with 5+ years of experience. Terra Engineering & Construction Corporation is a civil construction company specializing

Bachelor's or Master's degree in Engineering or Construction Management.