Trabajos field engineer en Syracuse, New YorkCrear alertas

We are seeking a Level 4 Senior Staff RF Engineer with a strong systems engineering focus to lead the architecture, analysis, and optimization of advanced RF systems for radar and communication applications. This role will require the ability to derive complete RF system budgets, assess and manage key performance parameters such as phase noise, CPCR (Clutter Power to Carrier Ratio), CA (Coherent Ambiguity), and more, while collaborating across engineering disciplines to ensure system performance exceeds mission requirements. Key Responsibilities: * Define and develop RF system architectures for radar and advanced sensing applications. * Derive and maintain RF link/system budgets including gain, noise figure, dynamic range, and spurious performance. * Model and predict phase noise, CPCR, CA, spurious suppression, and related RF performance metrics. * Conduct trade studies and system optimization to balance performance, cost, and schedule. * Guide the integration of Tx/Rx modules, LO generation/distribution, filters, and beamforming subsystems into complete radar systems. * Work closely with hardware, firmware, DSP, and mechanical teams to ensure full system-level alignment. * Perform root cause analysis of system performance issues and recommend design changes. * Generate and maintain high-quality documentation for requirements, budgets, analysis reports, and verification plans. * Provide technical mentorship to junior and mid-level RF engineers. Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field (Master’s or PhD preferred). * 10+ years of experience in RF system design and analysis, preferably for radar or high-performance comms. * Deep understanding of RF/microwave theory including gain, noise, non-linear effects, spurious content, and spectral purity. * Demonstrated experience deriving and validating system-level RF budgets. * Proficiency in simulation tools such as Keysight ADS, MATLAB, HFSS, CST, or similar. * Experience with phase noise analysis, CPCR, CA, dynamic range, and link margin calculations. * Familiarity with radar system concepts including waveforms, pulse compression, and Doppler processing. * Strong skills with RF measurement equipment (VNAs, spectrum analyzers, phase noise analyzers, power meters). * US Citizenship with the ability to obtain and maintain a security clearance. Preferred Skills: * Experience in phased-array architectures and beamforming. * Knowledge of military/aerospace standards and environmental testing. * Strong communication skills for customer and internal design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

We are seeking a Senior RF Engineer to design, develop, and test discreet transmit/receive (Tx/Rx) RF modules for advanced radar applications. The ideal candidate will have a strong background in RF circuit design, system integration, and performance optimization, with hands-on experience in taking designs from concept to production. Key Responsibilities: * Design, simulate, and develop discreet RF Tx/Rx modules for radar systems. * Conduct RF system-level analysis, link budget calculations, and trade-off studies. * Select and integrate components such as mixers, amplifiers, oscillators, and filters. * Perform schematic capture, PCB layout reviews, and work closely with layout engineers to ensure optimal high-frequency performance. * Conduct laboratory testing, tuning, and validation of RF modules against specifications. * Collaborate with cross-functional teams including firmware, mechanical, and systems engineering to ensure seamless product integration. * Support troubleshooting and root cause analysis for performance anomalies. * Maintain comprehensive documentation for design decisions, test results, and compliance requirements. Compensation Range: $99,100 - $128,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Qualifications: * Bachelor’s degree in Electrical Engineering, RF Engineering, or related field. * 5–8 years of experience in RF design, with a focus on radar or similar high-frequency applications (L,S,C, and X band). * Proficiency in RF simulation tools (e.g., Keysight ADS, HFSS, CST, or similar). * Proficiency in schematic capture and PCBA layout tools (e.g. Altium Designer, PADS, Allegro) * Hands-on experience with RF test equipment (VNA, spectrum analyzers, signal generators, power meters). * Solid understanding of RF/microwave circuit theory, impedance matching, noise figure, and gain optimization. * Experience with PCB design for RF and microwave circuits. * Familiarity with military or aerospace standards for RF systems is a plus. * US Citizenship and ability to obtain/maintain a security clearance. Preferred Skills: * Knowledge of phased-array radar architectures. * Electronics packaging concepts * Familiarity with thermal and mechanical considerations in high-frequency module packaging. Citizenship Requirements: Must be a U.S. citizen, Permanent Resident (green card holder), or protected individual as defined by 8 U.S.C. 1324b(a)(3). Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits: * Medical, vision and dental insurance for employees and dependents * Paid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability * 401(k) with immediate vesting on employer match * Tuition assistance * Student loan assistance * Wellness account, Care.com subscription and employee assistance programs * Employee stock purchase program with employer match Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Bring your innovation to the frontlines at Saab, Inc.’s Surveillance Systems division in East Syracuse, NY. This Senior Mechanical Engineer role offers a unique opportunity to develop the next-generation, truck-mounted ground-based radar system. Working in parallel with design and manufacturing, this hands-on role will be building and shaping the future of defense technology. Responsibilities will include but may not be limited to the following: • Application of mechanical engineering principles for the design and development of mechanical components, assemblies and systems., • Develop CAD 2D and 3D models of electronic, mechanical and electro-mechanical components, assemblies and systems., • Documentation of design solutions including reports, engineering drawings and Bill of Materials (BOM)., • Present and discuss technical concepts, tradeoffs, analyses, designs, and performance estimates., • Interface with Systems Engineering and other disciplines to develop/define/implement customer requirements., • Follow through on full product lifecycle: development, prototyping, integration, verification, delivery, and support., • Incorporate Mechanical Engineering best practices Design for Cost, Maintainability and Manufacturability., • Identify, manage, and solve problems associated with mechanical engineering work products., • Apply experience and knowledge to resolve design, supplier quality, manufacturing, and field issues., • Follow company standard operating procedures and Quality System requirements., • Plan, organize, and estimate required effort for responsible tasks, including possibly writing Basis of Estimates (BOEs)., • Provide effective communication across functional teams., • Work as key member of a cross-functional team to develop mechanical and electro-mechanical solutions. Compensation Range: $99,100-$128,800 The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Experience and Skills: • Bachelor of Science Degree in Mechanical Engineering., • Minimum of 8 years of relevant experience in advanced mechanical design with broad application and a fundamental understanding of the product development life cycle., • Understanding of mechanical design philosophy and design process flow., • Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes., • Significant product development background demonstrating a strong engineering aptitude and good problem-solving skills., • Demonstrated ability to resolve issues during design, development and execution of mechanical engineering activities., • Experience using SolidWorks, AutoCad, Creo, Ansys, MS Office (Excel, Word, Visio, PowerPoint, Outlook, etc.) to create drawings, documents, work products, and presentations., • Ability to update and review mechanical drawings for proper geometric dimension tolerancing (GD&T), accuracy, and completeness., • Strong written and verbal interpersonal and communication skills., • Proven contributor on project teams to accomplish objectives., • Effective contributor in a team environment, providing technical leadership where applicable., • Ability to work independently to achieve technical and program requirements., • Ability to work with other engineering disciplines to contribute to a collaborative development environment., • Prior experience with DoD or with U.S. government customers is highly desirable., • Familiarity with Military Standards, ruggedized equipment design, and environmental test requirements., • Knowledge of materials and corrosion control., • Experience with Geometric Dimensioning and Tolerancing (GD&T)., • Demonstrated performance and proficiency in the elements of Mechanical design, e.g. analysis and implementation of requirements, developing design concepts, evaluating designs, technical analysis, generating designs, design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Push the boundaries as a Senior Staff Mechanical Engineer at Saab, Inc.’s Surveillance Systems division in East Syracuse, NY. This role will support an extension of our research and development initiative related to unmanned airborne early warning radar systems. This newly created position offers a unique opportunity to join a development program from the start and will engineer a new generation of defense technology. Responsibilities will include but may not be limited to the following: * Application of mechanical engineering principles for the design and development of mechanical components, assemblies and systems. * Develop CAD 2D and 3D models of electronic, mechanical and electro-mechanical components, assemblies and systems. * Documentation of design solutions including reports, engineering drawings and Bill of Materials (BOM). * Present and discuss technical concepts, tradeoffs, analyses, designs, and performance estimates. * Interface with Systems Engineering and other disciplines to develop/define/implement customer requirements. * Follow through on full product lifecycle: development, prototyping, integration, verification, delivery, and support. * Incorporate Mechanical Engineering best practices Design for Cost, Maintainability and Manufacturability. * Identify, manage, and solve problems associated with mechanical engineering work products. * Apply experience and knowledge to resolve design, supplier quality, manufacturing, and field issues. * Follow company standard operating procedures and Quality System requirements. * Plan, organize, and estimate required effort for responsible tasks, including possibly writing Basis of Estimates (BOEs). * Provide effective communication across functional teams. * Work as key member of a cross-functional team to develop mechanical and electro-mechanical solutions. * Domestic and Foreign Travel may be required up to 20% Compensation Range: $112,900 - $146,800 #CJ The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training. Required Experience and Skills: * Bachelor of Science Degree in Mechanical Engineering. * Minimum of 15 years of relevant experience in advanced mechanical design with broad application and a fundamental understanding of the product development life cycle. * Understanding of mechanical design philosophy and design process flow. * Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes. * Significant product development background demonstrating a strong engineering aptitude and good problem-solving skills. * Demonstrated ability to resolve issues during design, development and execution of mechanical engineering activities. * Experience using SolidWorks, AutoCad, Creo, Ansys, MS Office (Excel, Word, Visio, PowerPoint, Outlook, etc.) to create drawings, documents, work products, and presentations. * Ability to update and review mechanical drawings for proper geometric dimension tolerancing (GD&T), accuracy, and completeness. * Strong written and verbal interpersonal and communication skills. * Proven contributor on project teams to accomplish objectives. * Effective contributor in a team environment, providing technical leadership where applicable. * Ability to work independently to achieve technical and program requirements. * Ability to work with other engineering disciplines to contribute to a collaborative development environment. Desired Experience and Skills: * Prior experience with DoD or with U.S. government customers is highly desirable. * Familiarity with Military Standards, ruggedized equipment design, and environmental test requirements. * Knowledge of materials and corrosion control. * Experience with Geometric Dimensioning and Tolerancing (GD&T). * Demonstrated performance and proficiency in the elements of Mechanical design, e.g. analysis and implementation of requirements, developing design concepts, evaluating designs, technical analysis, generating designs, design reviews. Citizenship Requirements: Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information. Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen. Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, a business casual atmosphere and comprehensive benefits. Highlights include: * Medical, vision, and dental insurance for employees and dependents * Generous paid time off, including 8 designated holidays * 401(k) with employer contributions * Tuition assistance and student loan assistance * Wellness and employee assistance resources * Employee stock purchase opportunities * Short-term and long-term disability coverage Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations. Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Affirmative Action employer for protected veterans and individuals with disabilities. Saab is an Equal Employment Opportunity employer, all qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Independently performs, tests, inspects and records technical work of the highest degree of complexity. Plans and coordinates field construction observation activities and reviews the work of and provides mentoring of other inspectors. Serves as a liaison between the Project Owner, Contractor, and Professional Engineer having project oversight., • Reviews materials against specifications, prepares change orders, prepares and reviews contractor payment applications, and ensures that project records are being prepared in accordance with accepted standards., • A Resident Engineer must be able to fully express thoughts in writing and compile summary reports of other inspectors. Must have the ability to perform with the highest degree of independence, and effectiveness, in the field or in the office, within parameters established through the project plans and specifications. Must be fluent in the use of computers as a tool to aid construction observation., • A Resident Engineer must be an effective communicator with good written communications skills. This position is often required to communicate the requirements of the project plans and specifications to the Contractor and negotiate impacts to the project from changed conditions., • The Resident Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Desired 10 years of related experience required, or similar position with experience in the construction field and transportation projects., • NICET Level IV certification or a Professional Engineer's (PE) license is required. Estimated Compensation Range: $89,440 - 108,160/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Syracuse, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Challenging Bridge Projects. Grow your Career. Build the Future. Are you a skilled bridge engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking an entry-level Bridge Engineer to join our Syracuse Bridge Department and help us deliver some of the largest and most complex infrastructure projects in Upstate New York. Our Bridge team is expanding, and we’re excited to offer you the opportunity to be part of the largest bridge program in our team's history. With active projects in nearly every county across the region, you'll play a key role in shaping critical infrastructure. We proudly serve a diverse range of clients, including NYSDOT, NYSTA, and numerous counties, cities, and villages throughout New York State. This unprecedented workload not only brings meaningful technical challenges to keep you engaged and learning, but also opens the door to unlimited career growth. If you're looking to make a real impact while advancing your professional journey, there's never been a better time to join us. In this role, you’ll support bridge engineering projects from initial planning and design through construction support. Working under the guidance of senior engineers, you’ll contribute to structural analyses, prepare design documents, and assist with field inspections. You’ll bring a strong foundation in civil or structural engineering, a willingness to learn, and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the most impactful infrastructure efforts in Upstate New York: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Bridge Design: Work on every aspect of bridge design projects, including inspection, structural calculations, geometry layout, plan development, and construction coordination., • Project Development: Assist in progressing bridge projects through the design process, including report writing, environmental permit coordination, and development of contract specifications., • Bachelor’s degree in Civil Engineering or a related field., • 0-3 years of experience in bridge design, • Proficiency in AutoCAD/Civil 3D and/or MicroStation/OpenRoads Estimated Salary Range: $73,424 – $92,352* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Responsible for field investigations, special inspections, material testing, project management, performance and engineering calculations, and authoring on-time reports. Responsibilities • Perform a variety of functions under direction of Senior Professional Engineer, • Prepare engineering studies and reports, • Perform special inspections, various field inspections, and materials testing as needed (soils, concrete, masonry, steel), • Perform test boring/test pit observations, laboratory analysis, and preparation of geotechnical calculations and reports, • Project coordination and project management of Special Inspection and Construction Materials Testing work, • Implement Quality Assurance, and assurance of field and laboratory adherence to technical standards and applicable codes, • Bachelor of Science in Civil Engineering, or related, • Engineer in Training (E.I.T.) Certificate, • Experience with Microsoft Office programs, including Word, Excel and Outlook, • Ability to maintain effective working relationships with managers, co-workers and clients, • Strong organizational skills, • Familiarity with construction materials, procedures and documents a plus Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR 6xVhsf6ZNQ

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is seeking an experienced Senior Project Engineer in the Buffalo, Rochester, or Syracuse, NY offices to support our growing railroad practice. You will be part of a team working on projects from conception through final design and construction. This position is diversified with opportunities to work in the office on the engineering design of railroad infrastructure and in the field with construction inspection/administration. You will work on a variety of designs and projects with the opportunity to learn and grow throughout your career at C&S. Position Responsibilities • Ability to work with internal and external staff on an individual and team basis., • Ability to motivate and mentor junior staff., • Strong written and oral communication, organizational, and interpersonal skills., • Ability to manage all aspects of smaller projects or assigned tasks as part of a larger overall project., • Work with team in Client relationship management and obtaining additional business opportunities., • Ability to challenge oneself and broaden knowledge base., • Willingness to be proactive and anticipate., • May require occasional travel away from the office, estimated 15%., • Utilize safe work practices in accordance with federal, state, local, and company standards., • B.S. in Engineering field, M.S. in related Engineering field a plus., • Registration as a Professional Engineer (P.E.)., • 10 or more years of railroad related design and construction experience., • Experience with preparation of contract documents from bidding though design and award., • Experience with AREMA Manual for Railway Engineering. Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. As an employee working on railroad related assignments with the need to occasionally visit railroad properties, you will be enrolled in our drug and alcohol testing program as mandated by the Federal Railroad Administration’s (FRA) 49 CFR 219 Drug and Alcohol Testing Requirements Program. A Candidate’s employment is contingent upon successful results of the test which will be covered and administered by C&S’s provider. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy team. LaBella’s Energy team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyzes, design, and commissioning services. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 4-8 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Designing geothermal or district energy systems experience preferred, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary range: $80,000.00 - $100,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description LaBella is currently hiring for a Senior Structural Engineer in our Syracuse, NY office. The Structures Discipline provides structural engineering services with emphasis on new design, repair and rehabilitation of constructed works, as well as investigation and performance evaluation. Individual must be able to work independently, as well as part of multi-discipline teams. Duties • Serves as a Lead Engineer who supervises a team of structural engineers, designers and technicians in production of structural construction documents including drawings, specifications, bidding and construction administration for large complex projects including calculation and document reviews., • Develops cost effective system layouts as well as performing calculations and coordination with other disciplines., • Performs site visits for documentation and cost estimating of existing systems and building conditions., • Prepares technical specifications., • Reviews and evaluates shop drawings and product submittals., • Visits construction sites to inspect work in progress or completed., • Maintains and manages budgets for projects including hours and resources., • Maintains client relationships, • Prepares Engineering Reports., • Completes complex and specialty types of design., • Stays abreast of technical advancements in respective field and disseminates information to others., • Minimum of 15 years of experience working in the consulting engineering industry., • Strong writing and communication skills., • Demonstrated ability to meet deadlines., • BS in Civil Engineering is required., • A New York State PE license is required., • Revit Experience is a plus., • Project history using computer analysis software experience is essential. Salary Range: $100,000 - $150,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • An Office Engineer assists the EIC/Resident Engineer on daily management of construction inspection projects, providing technical and administrative information to others working on the project to ensure that work complies with all engineering standards, codes, and specifications. Responsibilities include, review of daily inspection reports and payment quantities in accordance with NYSDOT/MURK requirements, prepare change orders for overruns, changed conditions, and additional work as well as other project administration roles., • The Office Engineer must also be familiar with corporate policies and safety requirements., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 10 years of related experience, or similar position with experience in the construction field and transportation projects., • NICET III or equivalent experience, or EIT designation, • Bachelor's Degree desired. Associate's Degree acceptable with relevant experience, • Excellent communication skills, • Ability to supervise or coordinate the work of others, • Knowledge of NYSDOT's Equitable Business Opportunities (EBO) software Estimated Compensation Range: $83,200 - 101,920/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description We are currently hiring an entry level Environmental Scientist/Geologist/Engineer in our Environmental division at our Syracuse office. The Environmental Scientist/Geologist/Engineer will support Phase I and II Environmental Site Assessments, environmental investigation and remediation projects at sites with contamination by materials such as solvents, petroleum fuels, metals, and PCBs. You have the opportunity to join a dynamic team working on large, technically engaging, and impactful projects. A successful candidate will be able to perform various tasks including field work, soil and groundwater sampling, drilling supervision, reporting, writing, and support project managers on various projects. Duties • Soil and groundwater sampling, • Field Activity Supervision, • Drilling Supervision, • Report Preparation Salary Range: $24 - $26 per hour The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 0-5 Years of experience required /preferred, • BS in Environmental Science, Engineering. or Geology preferred, • MS Office Suite, • Strong communication skills, • 40 Hour OSHA Hazwoper Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. o Flexible Work Schedule o Health/Dental Insurance o 401k Plan with Employer Match o Short & Long Term Disability o Profit Sharing o Paid Time Off o Leadership Development Program o Fitness Reimbursement o Tuition Reimbursement o Referral Bonus Program o Wellness Program o Team Building Events o Community Service Events

Job Description Job Title: Electrical Engineer Reports To: Maintenance Manager FLSA Status: Exempt Supervisory Responsibilities: No – Individual Contributor Essential Job Functions and Responsibilities: • Electrical engineer must have a strong understanding of electrical manufacturing processes., • Must be able to read, write and analyze electrical schematics and wiring diagrams., • Electrical engineer must have a broad knowledge of electrical principles, wiring specification codes and handbook formulas along with a working knowledge of PLC’s, VFD’s, Motor Control, and Power distribution., • Electrical engineer must have the capacity to analyze a problem from multiple perspective and explore creative solutions., • Must be able to devise testing methods and properties to confirm the functionality of electrical components and systems., • Determines proper type, size of materials and equipment for the job, including power requirements., • Performs electrical work requiring high degree of trade skill to install, test, inspect, adjust, repair and wire all plant equipment and circuits to required voltages and tolerances., • Able to locate, diagnose and remedy troubles quickly to avoid shutdowns and able to adjust all plant equipment to proper operating characteristics., • Fabricates material to be used for electrical equipment., • Performs other related duties as assigned. Required Skills or Abilities: • Ability to work individually or collaboratively on a team., • Utilize precision devices such as voltmeters or other measuring instruments., • Strong organizational skills and attention to detail., • Possesses time management skills with a proven ability to meet deadlines., • Proficient with Microsoft Office Suite or related software. Physical Requirements: • Requires work such as sitting at a desk and computer for periods of time, standing or walking up to 8 hours at a time on hard surfaces., • Must be able to traverse manufacturing plant and warehouse to access a variety of storage spaces and shelving units by stretching, squatting, and/or reaching., • Work is performed in a manufacturing plant with some exposure to environmental factors such as loud noises, odors, variances in temperature or weather and other factors., • Must be able to lift 25 pounds at times without assistance, up to 50 pounds with assistance. Education and Experience: • Requires a bachelor’s degree in Industrial Electrical Engineering or an alike field., • 5-10 years industrial electrical and/or mechanical experience.

Job DescriptionAre you ready to join a growing team that puts a premium on productivity and has an award-winning culture centered around transforming talented employees into effective business leaders? Then BHG Financial is the place for you. In 2001, we started with an idea, an opportunity, and $25,000. Back then, our focus was strictly on serving those in the medical industry. With healthcare in our heritage, we soon expanded to serve high-earning professionals in many other industries, providing all with leading-edge financial solutions, including our extensive network of community banks. Today, BHG Financial has firmly established its legacy as a leader in the financial services space. Founded on the philosophy of a better way to borrow, we are dedicated to helping accomplished professionals, small businesses, and institutions build upon their success through innovative financial solutions, a hassle-free process, and personalized concierge service. Our relentless commitment to the success of our customers is part of what has made BHG Financial thrive. We take a 360-degree view of our customers to tailor the best solutions for their financial aspirations. Today's professionals have multiple sources of income, not just their paycheck. Therefore, it is essential to factor those in when making responsible lending decisions. Our continued focus on data, analytics, and proprietary modeling has enabled faster funding for our customers. From business to personal loans to relationships with community banks, the country’s top professionals and business owners rely on us for our exceptional financial solutions and concierge service to continue their success and legacy. Who You AreWe are seeking an experienced and talented Network Cloud Engineer to join our growing team with a heavy network focus. As a Network Engineer, you will play a crucial role in designing, deploying, and managing cloud infrastructure across large environments. Leveraging Infrastructure as Code (IAC) principles, you will ensure seamless deployment and scalability. If you are passionate about cloud technologies, automation, and have expertise in Azure, Windows, Linux (RHEL), Kubernetes, Terraform, Ansible, and Python, we want to hear from you! Work environment: Hybrid (onsite 2-3 times a week) in our Syracuse, NY or Davie, FL office! Must reside near our office location. What You'll Do • Implement and maintain hybrid Azure / Cisco Routing / Cisco Nexus ACI / Palo Alto - Panorama / A10 seamless cloud network., • Design, deploy, and maintain cloud infrastructure in Azure, ensuring scalability and reliability., • Implement CI/CD pipelines using Azure DevOps or similar tools, • Implement Infrastructure as Code (IAC) practices using Terraform and Ansible., • Work with both Windows and Linux (RHEL) operating systems., • Manage Kubernetes clusters for containerized applications., • Utilize Python scripting for automation and custom tooling., • Implement secure vaulting solutions for sensitive data., • Collaborate with cross-functional teams to define and implement best practices.What You'll Need, • Bachelor’s degree in Computer Science, Information Technology, or related field., • Proven experience as a Cloud Engineer or similar role., • Azure certification (e.g., AZ-900, AZ-104) is a plus., • Strong understanding of cloud architecture and IAC principles., • Excellent problem-solving skills and attention to detail., • Ability to work independently and collaboratively in a fast-paced environment., • Strong communication and interpersonal skills., • Experience with VMware for virtualization., • Familiarity with Kafka, Redis, and MongoDB., • Proficiency in MSSQL and database administration., • Strong knowledge of GO programming language., • Storage Area Networking (iSCSI) experience.

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for an RF Engineer to join our team to help us accelerate our product development initiatives. Location: This position is onsite in Syracuse, NY office, with the potential for hybrid arrangements. Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Develop innovative RF subsystem and system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our cutting-edge communications, radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Support or perform project planning, execution, and oversight, • A desire to lead development projects and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Bachelor's degree in Electrical Engineering, or a related technical field., • 5+ years of professional experience, • Demonstrated skills in software simulation platforms such as Ansys HFSS, Matlab, or Python, • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Advanced degree in Electrical Engineering, or a related technical field. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $109,000 to $136,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job DescriptionAt ANS, we're not just a consulting engineering firm—we're a team of trailblazers shaping the future of civil, structural, and geotechnical engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Firm by Zweig Reports and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we're proud of what we've built and where we're headed. We're allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Weare seeking an experienced High Voltage Senior Structural Engineer with a specific focus on high-voltage substations and electrical infrastructure. This individual will be responsible for managing and executing structural scopes for substation projects from concept through IFC, including design of foundations for control enclosures, transformers, breakers, dead-ends, and other major HV equipment. This role requires a strong familiarity with structural requirements unique to substations, including coordination with electrical teams, vendor specifications, foundation optimization, and document production aligned with milestone submittals. You'll play a key role in shaping and scaling our HV structural team and supporting utility and interconnection projects for renewable energy clients. Technical Leadership & Oversight: • Lead structural engineering efforts for utility substation projects including control enclosures, transformer foundations, dead-end structures, capacitor banks, and static masts, • Review project documents and develop structural Basis of Design (BOD), including loads, design codes, geotechnical inputs, and material assumptions, • Design and size shallow and deep foundations (e.g., spread footings, drilled piers, embedded posts) based on geotechnical recommendations and equipment loads, • Perform load calculations (dead, live, wind, seismic) and develop structural models using accepted FEA tools (e.g., RISA, RAM, STAAD), • Coordinate with geotechnical engineers to integrate foundation performance assumptions and loading capacities (e.g., LPILE, MFAD inputs), • Prepare structural drawings, elevations, details, and specifications using AutoCAD and/or Revit for each milestone (30%, 60%, 90%, IFC) Client & Vendor Coordination:, • Coordinate with electrical engineers, control enclosure vendors, transformer manufacturers, and structure suppliers to obtain and interpret structural performance requirements, • Support client-facing meetings to present a design approach and resolve technical comments, • Review vendor-supplied structural performance requirements and incorporate into foundation and anchorage design, • Respond to RFIs and submittals related to structural foundations, design assumptions, and special inspections Other Areas of Focus:, • Provide input on internal design standards, templates, and QA/QC processes for substation projects, • Assist in developing resource plans, scopes, and estimates for future HV structural projects, • Serve as a technical mentor to junior structural engineers working on electrical infrastructure, • Collaborate with civil and geotechnical teams to ensure fully integrated substation site design, • Stay current on relevant codes (IBC, ASCE 7, NESC, etc.), utility standards, and AHJ requirements Qualifications:, • Professional Engineer (PE) license (required), • Bachelor’s degree in civil or Structural Engineering (Master’s preferred), • 8+ years of structural engineering experience, including at least 3–5 years specifically supporting high voltage substations or transmission infrastructure, • Proficiency with structural design software (e.g., RISA, RAM, STAAD, or equivalent FEA tools), • Proficient in AutoCAD; Revit experience a plus, • Strong understanding of applicable codes and standards (IBC, ASCE 7, NESC, IEEE, utility-specific structural criteria), • Experience with interpretation of geotechnical reports and integration of foundation parameters (bearing capacity, LPILE, corrosion, etc.), • Excellent communication, coordination, and client-facing skills

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY About Rezolut Rezolut is a national emerging platform of diagnostic medical imaging services, focused on delivering high-quality patient care with innovative technology. We provide fixed-site and mobile outpatient imaging services, positioning ourselves as leaders in radiology across all modalities.Position Overview Rezolut is seeking a Siemens-Certified Field Service Engineer to service, maintain, and repair Siemens Mammography, MR, and Ultrasound systems across our network in the Northeast. While Siemens certification is required, experience servicing other diagnostic imaging modalities—such as GE and Hologic—is highly valued. This position requires travel and offers training, career growth, competitive pay, PTO, and benefits.Primary Responsibilities • Troubleshoot, install, maintain, and repair Siemens Mammography, MRI, and Ultrasound systems., • Service additional diagnostic imaging equipment from GE, Hologic, or other OEMs, as needed., • Complete preventive maintenance, modifications, setup, calibration, QC, and QA per OEM specifications., • Maintain service records, daily customer communications, and follow-up to ensure resolution., • Maintain tools, test equipment, and ensure proper calibration., • Work collaboratively with internal teams while also operating independently in the field., • Lift, carry, and transport tools and equipment as required., • Adhere to HIPAA, OSHA, FDA, and other regulatory requirements., • Establish and maintain professional relationships with customers and peers.Required Education & Experience, • Siemens certification for diagnostic imaging systems is required., • Associate's degree or equivalent technical training; OEM Radiology, Electrical, or Technology experience preferred., • Minimum 2+ years of experience servicing diagnostic imaging equipment, including Siemens systems., • Experience with mechanical, electromechanical, and electronic diagnostic imaging systems., • Proficiency with MS Word, PowerPoint, Excel, and Outlook., • Excellent analytical, communication, and problem-solving skills., • Ability to work independently in a fast-paced environment with changing priorities., • Valid driver’s license and clean driving record., • Must be able to travel regularly.Preferred Experience, • Hands-on experience with other OEM imaging systems: GE, Hologic, etc., • Customer-focused service experience in medical imaging environments.Benefits, • PTO accrual from day one (Full-Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life, and voluntary insurance options, • 401(k) Retirement Plan, • Employee Assistance ProgramJob Type: Full-time

Job Description Hidden Level is transforming airspace safety with innovative, scalable drone detection and airspace technology. We provide real-time, actionable data to enhance security across various environments. As we expand, we're looking for an RF Engineer to join our team to help us accelerate our product development initiatives. Location: This position is onsite in Syracuse, NY office, with the potential for hybrid arrangements. Responsibilities: • Derive and document RF system requirements working collaboratively with multiple technical disciplines, • Perform trade studies and develop RF system architectures, • Simulate, model, design, select and characterize components, • Design, implement, test, and integrate RF circuit cards and subsystems for use in our cutting-edge communications, radar, and other sensor systems, • Participate in cross-functional technical design reviews, • Perform and support integration and test activities and events, • Assist with or provide information in support of project planning, execution, and oversight What We’re Looking For: • A desire to owe projects assignments and work creatively and collaboratively on cross-disciplinary teams to deliver solutions that impress our customers and move our industry forward., • An open-minded approach to solving challenges, and proactive development of backup plans to ensure the team can hit the mark even when encountering the unexpected., • A mindset trained on long-term goals and objectives, balanced with making demonstratable incremental steps along the way to meet the pace of our industry., • Excellent written and verbal communication skills to efficiently convey complex ideas, coupled with an ability to listen, question, and understand stakeholder needs. Required Qualifications: • Bachelor's degree in Electrical Engineering, or a related technical field., • 3-5years of professional experience, • Demonstrated skills in software simulation platforms such as Ansys HFSS, Matlab, or Python, • 10% travel Preferred Qualifications: • Experience and interest in one or more of the following areas:, • Antennas and Phased Arrays, • Receivers, • Exciters, • Simulation, • Anechoic Chamber Measurements, • Schematic Capture, • Advanced degree in Electrical Engineering, or a related technical field. Compensation and Benefits: Hidden Level offers a competitive salary and a comprehensive benefits package, including health insurance, paid parental leave, flexible time off, 401(k) with employer contributions, life insurance, and disability insurance. The company also provides a remote or hybrid work environment and potential stock options. Salary Range: The anticipated salary range for this position based out of Syracuse, NY is estimated at $89,000 to $110,000 annually. Please note that the salary information is a general guideline only. Hidden Level considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/ training, key skills as well as market and business considerations when extending an offer Equal Opportunity Employer: Hidden Level is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category. Security Note: Due to the nature of Hidden Level’s technology, only U.S. citizens can be considered for this position.

Job Description Our Client is seeking a Project Engineer - Water/Wastewater to join their growing team in Syracuse, NY! Water and wastewater management presents unique challenges from environmental, health, and economic issues, to regulatory concerns. Our water management experts comprehend these complexities and apply their expertise in all areas of feasibility, design, and master planning, taking into consideration the value of water as a precious natural resource. Our qualified professionals develop creative and effective solutions for any water management project and are dedicated to ensuring that communities receive safe, consistent water and wastewater distribution, collection, and treatment. Responsibilities • Independently apply extensive and diversified knowledge of principles and practices in broad areas of assignments., • Prepare advanced engineering designs and/or technical data for completion and accuracy., • Utilize advanced techniques, theories and practices to complete assignments., • Design and review complete project documents for conformity and quality assurance., • Develop and apply new and/or improved techniques, processes, etc., for designing engineering plans., • Analyze and interpret data, formulate and solve problems., • Prepare or review scopes of work and budgets, and schedule assignments., • Prepare proposals to provide professional services., • Provide direction to engineers, technicians and administrative staff., • Plan and coordinate detailed aspects of engineering work., • Represent the organization in a variety of ways as an expert on engineering assignments., • Work within AutoCAD Civil 3D and alongside the design team managers to successfully complete projects within established budgets and deadlines., • Perform field investigations/ site visits as needed., • Prepare comprehensive draft proposals and change orders for review., • Prepare conceptual layouts in consultation with PM or client., • Review hydraulic calculations., • Review utility layouts., • Conduct team and select client meetings., • Provide technical guidance to Engineers and Senior Engineers., • Prepare and review pump station designs., • Review and respond-to contractor shop drawing submittals, RFIs, and change order requests, with assistance from PM., • Process contractor requests for payment, with assistance from PM. Qualifications • Bachelor of Science degree in environmental engineering or civil engineering., • FE preferred., • PE preferred., • 4-6+ years of experience in the civil/environmental engineering field with a concentration in water/wastewater design., • Experience, including linear (pipeline) work required., • Some experience with pump station design, water & wastewater treatment systems design preferred., • Experience with AutoCAD & OpenRoads is desired., • Excellent communication skills., • Design experience with water and wastewater treatment plant processes and design., • Ability to read, write,and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions.

Job Description About Us: Echelon Supply and Service is a leading provider of premium industrial and hydraulic hose solutions for commercial and defense markets across North America. Since 1977, we've built our reputation on a customer-first approach, delivering quality products and exceptional support. Headquartered in Liverpool, NY, we operate over ten locations in the U.S. and Canada, with recent expansion to the west coast. Our mission is to be North America's premier industrial and hydraulic hose supplier, empowering our customers' success through reliable, innovative products and outstanding service. Join us in shaping the future of industrial and hydraulic solutions! Position Overview: We are looking for a motivated and detail-oriented Quality Engineer to join our dynamic team. This role is essential in ensuring that our products consistently meet stringent quality standards set by both our industrial clients and government customers. You will play a key role in developing quality processes, conducting inspections, and collaborating with cross-functional teams to drive continuous improvement. This position requires U.S. citizenship. Key Responsibilities: • Quality Standards Development: Create and implement quality standards and procedures that align with industry best practices and regulatory requirements., • Reporting and Documentation: Develop, write, and review various quality reports, including First Article Test (FAT), Production Part Approval Process (PPAP), AS9100, and others, ensuring accuracy and compliance for customer acceptance., • Customer Interaction: Present completed materials and quality documentation to customers and government source inspectors, addressing any concerns or questions they may have., • Inspection and Testing: Conduct thorough inspections and tests of materials, equipment, processes, and products to verify that they meet defined quality specifications., • Collaboration: Work closely with operations managers and supervisors to identify areas for quality control improvements and implement effective solutions., • Regulatory Compliance: Ensure that all workflows, processes, and products adhere to relevant government standards and industry regulations., • Issue Resolution: Investigate and troubleshoot product or production issues, developing and implementing corrective actions and improvements., • Continuous Improvement: Identify and enhance quality control processes, ensuring they meet or exceed customer expectations and regulatory requirements. Qualifications: • Educational Background: Bachelor’s degree in Quality, Industrial, Mechanical Engineering, or a related field, or equivalent years of experience in a relevant role., • Industry Knowledge: Familiarity with company, government, and industry standards and processes such as AS9100, ISO 9001, etc., • Technical Skills: Proficient in using quality assurance software tools and methodologies. Strong understanding of statistical process control (SPC) and Six Sigma principles is a plus., • Analytical Skills: Excellent analytical, problem-solving, and critical-thinking abilities to assess quality issues and develop effective solutions., • Interpersonal Skills: Strong communication and interpersonal skills that foster a collaborative team environment and facilitate cross-departmental cooperation., • Experience: Minimum of 2 years of experience in quality engineering, quality assurance, or a similar role., • Software Proficiency: Advanced proficiency in Microsoft Office Suite (Excel, Word, PowerPoint) and experience with quality management systems (QMS)., • Project Management: Strong project management skills, with the ability to manage multiple tasks and projects effectively under tight deadlines. Echelon Supply and Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionDescription Lead Projects. Mentor Talent. Build the Future. Are you a skilled transportation engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Highway Department and take a leading role in the design and execution of critical transportation projects across New York State. In this role, you’ll manage projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in highway design modeling and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. You’ll also play a key role in shaping two of the region’s most impactful infrastructure efforts: the I-81 Viaduct Project and the Onondaga County/Micron Transportation Improvements—projects that will redefine mobility and connectivity in Central New York. With these transformative projects driving unprecedented momentum, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our department, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s degree in Civil Engineering or a related field., • Licensed Professional Engineer (PE) in New York State, • Minimum 8 years of experience in transportation design, with a strong focus on NYSDOT/Federal Aid projects, • Proficiency in AutoCAD/Civil 3D and MicroStation/OpenRoads, • Estimated Salary Range: $97,760 - $120,640/year* WHO WE ARE: At C&S Companies, we believe that a great job is about more than just the work—it’s about the people, the culture, and the opportunity to grow. We foster a family-friendly, collaborative, and employee-focused workplace grounded in quality, integrity, trust, fun, and accountability. Belonging is a top priority: we are committed to cultivating and sustaining a safe, inclusive atmosphere where everyone feels valued, supported, and empowered to thrive. C&S is a national planning, design, and construction firm with more than 600 employees and growing. For over 50 years, we’ve delivered critical infrastructure services across aviation, transportation, civil/site infrastructure, planning, sustainability, construction and program management, energy, environmental, facilities, and architecture. We have offices throughout New York State and in California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description At Atlantic Testing Laboratories (ATL), we offer a dynamic career that blends fieldwork with office assignments. With more than 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. ATL is an expanding firm and is in search of qualified Geotechnical Engineer or Project Geologist candidates. Experienced and entry level/early-career candidates are encouraged to apply. Geotechnical Engineer/Project Geologist Perks & Benefits: • Competitive pay ranging from $68,000 to $85,000/year, • A mix of field and office assignments, • Directed experience and financial support for professional licensure (EIT, PE, IG, PG), • Work directly with Senior Engineers and Project Managers, • Advancement opportunity, • Company vehicle to travel between office and job sites, • Competitive Health Insurance; multiple plans offered, • Paid Vacation/Sick/Personal/Holidays, • Safety training and equipment, • B.S. in Civil Engineering, Civil Engineering Technology, Geology or related degree, • NYS PE, PG, EIT or IG license/certificate or ability to obtain within one year, • Strong written and verbal communication skills, • Ability to review and interpret project plans and specifications, • Ability to effectively multitask, • Positive attitude with ability to work independently and in a team environment, • Perform evaluation of subgrade preparation for shallow foundations, • Monitor the installation of deep foundation systems, • Perform construction materials engineering, geotechnical evaluations and special inspections during construction, • Provide technical support to Construction Materials Technicians, • Project Management duties including preparation and review of proposals, client management, technical reviews of reports, and review of project invoices, • Preparation and distribution of technical reports and project correspondence

Job Description This position is on site in Albany, New York. Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Perform day-to-day construction monitoring and detailed inspections for Mechanical (HVAC) verifying adherence to plans, specifications, standards, and codes., • Prepare and maintain comprehensive daily inspection reports, Inspector Daily Reports (IDRs), photographs, field books/diaries, sketches, and record drawings., • Review and process contractor submittals, RFIs, shop drawings, change-order proposals, and contract-claim documentation; conduct change-order and delay-analysis using CPM methods., • Document and analyze time-and-material and unit-price work; review payment applications and provide recommendations for adjustments., • Enforce safety procedures (OSHA-30, fall protection, confined-space entry, work-zone requirements); issue noncompliance notices or suspend work for life-threatening safety violations after consultation with supervisors. Requirements Essential Skills and Experience: • Bachelor's Degree in Mechanical Engineering from Accredited University., • 5 years of experience in mechanical engineering, HVAC, plumbing, laboratories, healthcare, pharmaceutical facilities, and research and development (R&D)., • Valid Class C (or equivalent) driver’s license., • OSHA 30-hour Construction Safety certification., • Knowledge of construction inspection procedures, familiarity with laboratory, healthcare, and Pharmaceutical (research and development) projects, • Ability to read, interpret, and enforce plans, specifications, design manuals, codes, and regulatory requirements., • Proficiency in contract administration: submittals, RFIs, change-orders, claims, and payment application review., • Skilled in preparing clear, concise written reports, sketches, and photographic records., • Good oral and written communication; ability to lead meetings and coordinate among diverse stakeholders., • Capacity to identify constructability issues, recommend corrective actions, and promote efficient project delivery.Company DescriptionJoin Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job Description This position is on site in Albany, New York. Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Perform day-to-day construction monitoring and detailed inspections for Electrical (Power, Backup Power, and Fire Alarm verifying adherence to plans, specifications, standards, and codes., • Prepare and maintain comprehensive daily inspection reports, Inspector Daily Reports (IDRs), photographs, field books/diaries, sketches, and record drawings., • Review and process contractor submittals, RFIs, shop drawings, change-order proposals, and contract-claim documentation; conduct change-order and delay-analysis using CPM methods., • Document and analyze time-and-material and unit-price work; review payment applications and provide recommendations for adjustments., • Enforce safety procedures (OSHA-30, fall protection, confined-space entry, work-zone requirements); issue noncompliance notices or suspend work for life-threatening safety violations after consultation with supervisors. Requirements Essential Skills and Experience: • Bachelor's Degree in Electrical Engineering from Accredited University., • 5 years of experience in electrical engineering, laboratories, healthcare, pharmaceutical facilities, and research and development (R&D)., • Valid Class C (or equivalent) driver’s license., • OSHA 30-hour Construction Safety certification., • Knowledge of construction inspection procedures, familiarity with laboratory, healthcare, and Pharmaceutical (research and development) projects, • Ability to read, interpret, and enforce plans, specifications, design manuals, codes, and regulatory requirements., • Proficiency in contract administration: submittals, RFIs, change-orders, claims, and payment application review., • Skilled in preparing clear, concise written reports, sketches, and photographic records., • Good oral and written communication; ability to lead meetings and coordinate among diverse stakeholders., • Capacity to identify constructability issues, recommend corrective actions, and promote efficient project delivery.Company DescriptionJoin Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job Description We are seeking an experienced test engineer or electrician to join the QE MV Services team. The successful candidate will be responsible for commissioning, testing, and troubleshooting of medium voltage reclosers and protection and control systems, including SEL relays and other communication devices. They will also be responsible for acceptance and maintenance testing of MV cable, overhead equipment, pad-mounted transformers, and MV/LV switchgear. This role includes significant travel across the northeast with occasional national travel. Essential Duties · Perform acceptance testing and commissioning of reclosers, and protection and control systems in accordance with NETA/NICET standards · Perform functional testing, including protection and control schemes, on medium voltage systems including interconnection equipment specifically for PV/BESS systems · Perform acceptance and maintenance testing of variety of equipment from low voltage switchboard to point of interconnection. · Ensure that all equipment is installed and commissioned in accordance with manufacturer's specifications and industry standards · Perform pre-testing and witness testing of PV/BESS systems with AHJ · Troubleshoot and repair issues arising during commissioning · Prepare and review commissioning documentation, including test procedures and as-built drawings · Provide technical support to other field personnel during installation and commissioning · Communicate effectively with project managers, clients, site owners and other stakeholders · Stay current on industry developments and new technologies in acceptance and maintenance testing. Education & Certification Required: · Journeyman license or Associates/Bachelor's degree in Electrical Power Engineering or equivalent electrical experience in a related field. Experience Required: · Medium voltage experience should be related to protection and control schemes with level of expertise in SEL relays · Experience interpreting wiring diagrams to prepare relay logic and protection schemes. · Experience performing testing of transformers, reclosers, primary meters, and SEL relays · Strong problem-solving and analytical skills · Excellent verbal and written communication skills · Must be able to work independently and in a team environment · Must be able to work in a fast-paced, deadline-driven environment Specialized or Technical Knowledge Licenses, Certifications Preferred: · NICET Electrical Power Testing certifications · Thermography certifications (Level 1) · IT/networking skills: familiarity with RS485, Modbus, tcp/ip, etc. · OSHA 30 Certification · Completion of NFPA 70E courses · CPR/First Aid Functional Knowledge: · Knowledge of National Electrical Code and standard design/construction practices · Clear understanding of OSHA safe workplace practices and procedures · Ability to read and understand electrical single-line and three-line diagrams as well as other construction/DAS/design drawings or permitting documentation Company/Industry Related Knowledge: · Electric and related utilities and utility maintenance · Solar energy/BESS installation, maintenance, and optimization Physical Requirements: · Ability to lift up to 50 pounds regularly · Ability to move safely over uneven terrain · Ability to sit or drive for prolonged periods · Ability to safely climb ladders while carrying 50 pounds · Ability to work in extreme weather QE Solar offers incredible benefits! We enjoy: · 100% paid employee premium on health benefits; additional dependents at low costs and great plans for Health, Dental, Vision, FSA or HSA · Wellbeing and Employee Assistance · Perks at Work Marketplace for discounts on gym memberships, classes, tech, vacations, tickets, and more · Family Building and Adoption Assistance Programs · Learning & Development Opportunities · Discounted Life & Disability Insurance Workplace Type: On-site Salary Range: $45.00-$50.00 Per Hour Employment Type: Full-time Location: Syracuse, NY, USA Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.

Job DescriptionDescription At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun and accountability. Belonging is a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview We are seeking experienced Inspectors to be responsible for construction/transportation inspection services on a variety of projects such as bridge/roadway/rail road/intersection/trail repair, replacement and new construction in these NY State cities and locations: Counties of Albany, Broome, Cayuga, Cattaraugus, Chautauqua, Chenango, Clinton, Cortland, Delaware, Erie, Genesee, Jefferson, Lewis, Madison, Monroe, Niagara, Oneida, Onondaga, Ontario, Oswego, Otsego, Putnam, Schoharie, Sullivan, Tioga, and Tompkins, as well as the greater Syracuse, Buffalo, and Albany areas. Opportunities may also exist in support of our Railroad efforts in New Jersey and Northern Pennsylvania. Why Take a Field Assignment With C&S? • We provide full construction support for our field staff throughout the entire assignment., • We offer a great employee benefits package including health insurance, paid holidays, paid vacation, sick time, life/disability insurances and much more., • It is our intent to provide continued employment ranging from temporary short-term assignments up to 1 year in length beginning March/April 2021 to multiyear assignments for candidates who possess additional skills in preparing contract documents, engineering workups and estimates., • We provide paid orientation/training and attentive management support including 24/7 emergency contact., • We provide personal safety equipment at no cost; some inclement weather gear and a clothing allowance for some work related items (i.e. steel toe boots)., • We reimburse work related mileage and tolls., • We pay for work related certifications including paid time off to take test and cost of testing., • Competitive hourly rate and a monthly cell phone stipend. Position Responsibilities: • Working largely independently, performs routine construction inspection services under the supervision of a Chief Inspector or Resident Engineer. May be responsible for review and assignment of work for Inspector(s)., • Duties include taking and documenting detailed measurements for payment, supervising material testing, notifying supervisor of issues and potential deviations from plans and specifications, and working with the contractor to resolve minor issues without guidance., • This position requires full knowledge of company standards, plans, and New York State DOT specifications. Qualified candidates will demonstrate familiarity and competence with various common job site conditions, will be able to clearly communicate project requirements to a contractor, and have the ability to resolve day-to-day disputes with a contractor, as well as have the experience required to know when to elevate an issue to their supervisor, all while maintaining detailed records of work and measurements and documentation for payment., • Utilize safe work practices in accordance with federal, state, local, and company standards., • Communicate incidents, accidents, near misses, potential hazards, and unsafe working conditions to a supervisor or the Health and Safety Department as soon as identified. Required Knowledge, Skills & Abilities: • Desired 5 years related experience, or similar position with experience in the construction field and transportation projects., • NICET Level III certification or successful completion of Fundamentals of Engineering exam required. Estimated Compensation Range: $79,040- 95,680.00/year* Learn about our comprehensive Benefits *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionSalary: $20-23/hr DOE Location: Halifax Fan based at CNY Fabrication LLC: 79 General Irwin Blvd, North Syracuse, NY 13212 Reporting to: Functional Field Service and Test Engineer Hierarchical Manager Chief Engineer Purpose of role: To assemble and test Halifax-fan products at the US manufacturing facility under direct supervision of the Test Engineer. Quality, Cost, Delivery & Safety (QCDS) responsibilities * Quality: Know the design sold, and ensure the tested assembly meets that design 100% of the time. If unsure STOP, clarify and disposition appropriately. * Cost: Work closely with all other departments to share areas of concern with build quality, and seek systemic corrective action that prevents this from repeating. * Delivery: Know and meet the Master Production Schedule (MPS) agreed Test/Fitting complete date. * Safety: Maintain a no compromise Health and Safety compliant work environment. Your workspace must be 5S compliant. Key Requirements and Responsibilities: * Fully Participate as a Member of the Fitting Team sharing responsibility for ensuring deliveries are in line with the MPS (Master Production Schedule). * Work with other members of the Halifax team to ensure all parts are available on time and to the correct specification and cost. * Balance Impellers (Using Halifax Fan Balancing machine) and record quality related data. * Assemble and record quality related build information/data. * Final test (Trim Balance) Halifax Fan products, and record quality related data. * Trouble shoot and rectify fan vibration and/or performance issues prior to shipment. * Validate that the product meets the specification and standards/codes of the product sold. * Ensure zero defects prior to release of an assembly to shipping. * Ensure all documentation is supplied with the product. Knowledge, Skill or Ability required * Needs to be a skilled fitter/assembler of rotating equipment or similar • 3-5 years experience in any similar mechanical role. Desirable 5-7 years experience in a similar role. • Experience using vibration analysis equipment and processes. Able to work on their own using instructions in written or verbal form. * Ability to work safely in often difficult to access locations. * Ability to lift and place parts up to 25lbs.

Job Description Company Overview CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform construction special inspections and material testing services at commercial construction sites in the Greater Syracuse, NY Area. Responsibilities • Perform tests and inspections for soils, concrete, masonry, hot mix asphalt, spray applied fireproofing, welding & bolting, geotechnical investigations, structural steel, and more for quality control/quality assurance on commercial construction job sites, • Read construction drawings and specifications and correctly interpret test results, • Complete each testing assignment accurately and in accordance with the appropriate standard, • Record and report results in a clear, concise manner, • Turn in field data records and completed reports for each project daily, • High School Diploma required, • Associate or bachelor’s degree in civil engineering / technology, or related is ideal although not necessary, • Must possess at least one International Code Council (ICC) certification for one of the following Special Inspector categories: Reinforced Concrete, Soils, Masonry, Spray Applied Fireproofing, Steel & Bolt, or Steel & Weld, or American Concrete Institute (ACI) Grade 1, or EIT (Engineer-in-Training) Certificate through a State Board, • Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Benefits CME offers competitive wages and all benefits listed here: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal). All benefits become available to eligible full-time employees upon completion of an eligibility period. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE). Powered by JazzHR LJAcc20D2M

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Syracuse, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus, • Ability to work well with a team and good analytical skills Salary range: $70,000.00 - $90,000.00 per year Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Employment Type: Full-Time FSLA: Salary/Exempt Salary Range: $95,000.00 - $110,000.00 Division: Project Management Department: Project Management Reports to: Project Manager Supervisory Duties: Yes The Assistant Project Manager (APM) will serve as a vital team member while assisting the Senior Project Manager and/or Project Manager on all aspects of a project. APM’s will be expected to take on central roles for the oversight of the Project Engineer with a specific focus on document control (RFIs, submittals, material delivery, etc.), subcontractor coordination, design team communication, project reporting and overall representation of Consigli throughout the entirety of the project. Responsibilities / Essential Functions • Serve as a main point of contact for communication with Owners, OPMs and Design Teams members., • Coordinate and provide input during weekly meetings with subcontractors, design teams, and owner representatives to resolve field conflicts and drive resolution., • Support project cost and change management process: prepare reports for review with other team members and present at both Owner and internal meetings., • Assist in development of estimates and bid proposals for both lump sum and GMP projects., • Oversight/Management of Project Engineer and associated responsibilities including document Control, RFIs, Submittals, Material Delivery Tracking and Meeting Minutes., • Mentor: support, develop, and train supporting team members, including Project Engineers., • Maintain close relations with subcontractors, including early notification of submittal & material delivery schedule expectations., • Monitor executed subcontracts and insurance certificates; verify contracts and insurance are in place prior to commencing work., • Coordinate with Project Scheduler to update and distribute project master schedule with input from Superintendent and project team., • Assist the project Superintendent and other team members in the resolution of all critical issues, RFI’s, etc. with a focus on quality, cost and schedule; provide documentation as necessary., • Take ownership of the closeout process: complete and implement project closeout checklist., • Manage close-out documentation (as-builts, O&Ms, warranties, test reports, etc.) for submission to Design Team and Owner., • Manage financial closeout process with subcontractors and Owner., • Punch List: Upload and distribute the punch list through Procore to subcontractors., • Assist with coordinating work completion as required and maintain an accurate log of items to be completed., • Observations and Field Reports: work with project team to conduct field walks as necessary and compile any corresponding documentation accordingly. Review Design Team field reports and work with required parties to resolve open items and drive to resolutions., • Safety: perform regular safety walks with field and safety staff and record observations. Key Skills, • Strong communication skills., • Ability to review, understand and support all change management processes., • Strong initiative and problem-solving abilities., • Ability to multi-task and self-prioritize., • Motivated and driven., • Ability to work in a team environment with a primary focus on collaboration., • Excellent written and verbal presentation skills. Required Experience • A bachelor's degree in engineering, Construction Management or Architecture preferred., • 3 - 5 years’ experience within the construction industry in project management or similar role., • OSHA 10 and OSHA-30 preferred., • Additional proficiencies may include cost management software (Timberline, Sage preferred), scheduling software (Primavera P6 preferred) and construction management software (Procore preferred).

Job DescriptionDescription: Precast Engineer - Civil/Structural Join Our Team as a Precast Engineer – Shape the Future of Concrete Design & Innovation! Fisher Associates is hiring a full-time Precast Engineer to design and engineer high-quality precast concrete components for a variety of civil and structural engineering projects. You’ll ensure every element meets structural codes, safety standards, and project specs—delivering safe, reliable, and cost-effective solutions. Collaborate with a skilled, supportive team and grow your engineering career in a flexible, impact-driven environment. Apply now and engineer the future with us! About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials., • Support Project Managers and Designers throughout the project lifecycle. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Precast Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0 - 5 years minimum of transportation/structural engineering experience, • Concrete design engineering course or design experience preferred, • EIT or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver high quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure designs adhere to state and local standards, regulations and safety codes., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design, • Provide technical support during construction, respond to RFIs and attend site visits., • Provide technical support during construction, respond to RFIs and attend site visits., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Project Engineer • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it., • Proficiency in MicroStation, STAAD and Bridge Design Software., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred)., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: Highway Design Engineer – Civil/Structural | Shape the Future of Transportation Ready to build the highways of tomorrow? Are you a skilled Highway Design Engineer with a passion for designing safe, efficient, and innovative transportation systems? Join our dynamic team of civil and structural engineering professionals where your expertise in roadway design, highway infrastructure, and transportation engineering will directly impact the communities we serve. In this role, you’ll play a key part in designing highways, roadways, intersections, and other critical transportation infrastructure projects. You’ll collaborate with multidisciplinary teams to solve complex engineering challenges and ensure all designs meet industry standards, environmental requirements, and safety regulations. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Demonstrated ability to efficiently manage highway design projects, including drainage, alignments, and related tasks., • Prepare and maintain comprehensive design plans, detailed specifications, technical reports, and accurate cost estimates., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Proactively support project managers with schedules, documentation, and presentations. Your Impact Matters, Your Career Thrives. Work on engaging Highway Design Engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Highway Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience Highway Design Engineering experience preferred, • EIT required, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD, OpenRoads, and Bridge Design Software preferred., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job DescriptionDescription: Advance Your Career in Environmental Science – Make a Real-World Impact Are you an Environmental Specialist, Environmental Scientist, or Environmental Engineer looking to take your career to the next level with hands-on, impactful work? Fisher Associates is seeking an Environmental Specialist II to join our mission-driven team dedicated to environmental consulting, site assessments, remediation, and regulatory compliance. In this role, you’ll lead and support Phase I and II Environmental Site Assessments (ESAs), oversee cleanup and remediation projects, and ensure compliance with local, state, and federal environmental regulations. Your expertise in environmental investigations, remediation strategies, and sustainability practices will directly protect natural resources and build stronger, more sustainable communities. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Plan and execute Phase I and II Environmental Site Assessments (ESAs), due diligence investigations, and environmental compliance audits in accordance with ASTM standards., • Design and implement site remediation programs including soil, groundwater, and vapor mitigation., • Prepare site characterization reports, corrective action plans, soil management plans and site-specific health and safety plans., • Perform field inspections, including sampling of soil, water, vapor, and air; well monitoring; and operation and maintenance of remediation systems., • Oversee field activities such as drilling, sampling, and remediation system installation with minimal supervision., • Coordinate effectively with laboratories for sample submission and chain-of-custody documentation., • Interpret environmental data and prepare technical reports, analytical data tables, plume mapping, and collaborate on GIS mapping for project documentation and regulatory submittal., • Monitor, collect data for, and optimize ongoing remediation systems., • Coordinate with regulatory agencies, subcontractors, and clients., • Serve as Site Safety Officer, ensuring projects comply with applicable environmental laws and health and safety standards, including any required training requirements., • Collaborate across multidisciplinary teams to deliver integrated environmental solutions., • Ensure QA/QC standards are met throughout the project lifecycle., • Provide technical support for proposals, cost estimates, and remediation planning., • Support abatement-phase construction administration., • Conduct compliant asbestos building inspections, quantifications, draft reporting, and project air monitoring., • Conduct compliant materials inspections for lead paint, PCB-caulk, mold, and universal waste. Your Impact Matters, Your Career Thrives. Work on engaging environmental projects as an Environmental Specialist II and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Eligible for Straight-time Overtime, • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid #LI-CA1 Requirements: What You Bring, Your Expertise as an Environmental Specialist II • B.S. in Environmental Science, Geology, Engineering, or related field., • Minimum of 5-10 years of relevant experience in site remediation and environmental consulting., • Knowledge of EPA and state remediation regulations (CERCLA, RCRA, NYSDEC, PADEP, etc.)., • Experience with remediation technologies (e.g. ISCO, SVE, bioremediation, excavation)., • Strong analytical and problem-solving skills., • Excellent communication and report-writing abilities., • OSHA HAZWOPER 40-Hour with current 8-Hour OSHA HAZWOPER annual refresher., • NYSDOL-Certified Asbestos Building Inspector strongly preferred., • NYSDOL certifications including Asbestos Air Monitor, Project Designer, or Mold Assessor a plus., • Willing to travel and work 10+ hour field days in peak season., • Proficient in Microsoft Office, AutoCAD, Bluebeam, PDF; experience with ArcGIS/View, Survey123 preferred., • Proven knowledge of sampling methods and environmental regulations and guide documents., • Ability to read plans and understand building systems (HVAC, insulation, products)., • Experience reading and understanding GIS mapping, contour mapping, and data driven plume mapping., • Ability to direct contractors, drillers, and other field subcontractors during field projects., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work and solve problems with critical thinking and sound judgment., • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Committed to building trust and collaboration through integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be able to lift up to 25 pounds at a time., • Ability to stand and walk for long periods of time and distance., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Must pass respirator medical clearance and respirator fit test., • Must be able to wear a respirator for required work, occasionally for extended periods of times., • Must be comfortable wearing project-specific level of Personal Protective Equipment (PPE) such as Tyvek suits, nitrile gloves, safety glasses, hard hat, and steel toe boots.

Job Description Full-time | Professional Locations: Clifton Park, Cohoes, East Syracuse, Monroe, New Windsor, Poughkeepsie, Staten Island, Syracuse, Wappingers Falls, NY Why Join Rezolut? At Rezolut, we’re redefining diagnostic imaging services across the Northeast. We focus on delivering exceptional Mammography care, leveraging advanced technology and a patient-first mindset. If you are a GE or Hologic Mammography expert looking for hands-on work, career growth, and the ability to make a real impact, this is your opportunity.What You’ll Do • Lead service, maintenance, and repair of GE and Hologic Mammography systems, ensuring the highest standards of performance., • Perform preventive maintenance, calibrations, quality control (QC), and quality assurance (QA) according to OEM specifications., • Troubleshoot complex mechanical, electromechanical, and electronic issues on Mammography equipment., • Maintain accurate service records and communicate effectively with customers, ensuring rapid resolution of issues., • Collaborate with team members while operating independently in the field., • Travel regularly to customer sites throughout the Northeast.What We’re Looking For, • Strong hands-on experience servicing GE and Hologic Mammography equipment (minimum 2+ years)., • Associate’s degree, OEM Radiology, Electrical, or Technology training preferred., • Proficient with computer tools (MS Word, Excel, PowerPoint, Outlook)., • Excellent problem-solving, analytical, and communication skills., • Self-motivated, adaptable, and able to thrive in a fast-paced environment., • Valid driver’s license with a clean record.Nice to Have, • Experience with other imaging modalities (Ultrasound, MRI, CT, X-ray) and OEM brands such as GE and Hologic., • Customer-focused service experience in a healthcare environment.What We Offer, • PTO accrual from day one (Full-Time), • 6 Observed Holidays, • Medical, Dental, Vision, Life, and voluntary insurance options, • 401(k) Retirement Plan, • Employee Assistance ProgramJoin us and be a key part of a team that delivers excellence in Mammography imaging across the Northeast.

Job DescriptionDescriptionThe Control Systems Sales Engineer is responsible for developing and securing automated control system projects across commercial, industrial and manufacturing applications. This role focuses on creating innovative process control solutions while maintaining strong profitability. The ideal candidate will combine deep technical knowledge of industrial automation with consultative sales skills to solve complex client challenges. Key Responsibilities • Develop and secure profitable automation and control system projects while meeting quarterly and annual sales targets, • Design and propose integrated control solutions building automation systems, • Create detailed technical proposals including system architecture, scope of work, and accurate cost estimates, • Provide technical guidance on process optimization and control strategies, • Conduct site surveys to assess existing systems and recommend improvements, • Stay current with industrial automation trends and new control technologies, • Develop and maintain relationships with system integrators and end users, • Provide technical presentations and demonstrations of control system solutions, • Bachelor's degree in Electrical Engineering, Computer Engineering, or related field preferred, • 3+ years of technical sales and estimating experience in industrial automation, • Computer networking and server knowledge a plus, • Proven track record of meeting sales targets in a technical environment, • Excellent project estimation and scope development skills, • Strong presentation and interpersonal communication abilities, • Experience with major automation platforms (e.g., Allen Bradley, Siemens, Honeywell), • Knowledge of industrial networking and communication protocols, • Understanding of manufacturing processes and industrial applications, • Competitive base salary with performance-based incentives, • Comprehensive medical and dental benefits (employer/employee contribution), • 401(k) plan with company contribution, • Paid Time Off (PTO) and sick days, • 6 paid holidays, • Career advancement opportunities tied to company growth

Job DescriptionDescription: The Manufacturing Engineer position is quite varied regarding the scope of work performed. This position is responsible for creating and enhancing processes and systems by leveraging new technologies and automation. This position will research automation techniques, test new systems for efficiency and assist in the planning of factory layouts to optimize production. Requirements: Essential Functions of Position: • Work with Product Design Engineers and Production Engineers to improve product design for ease of manufacturing and assembly., • Analyze production processes, schedules, methods and other data and then provide management with reports containing the data and statistics to enable management to better understand future requirements needed to improve/ optimize the manufacturing process., • Analyze and plan workflow, equipment placement and space requirements to improve manufacturing efficiency, • Analyzing production data to determine route causes for machine downtime. Implement preventative maintenance schedules and help train new operators on proper machine operation for optimal performance., • Coordinate equipment, maintenance and repairs to ensure manufacturers procedures and instructions are followed in order to keep production equipment operational., • Maintain manufacturing process documentation (SOP’s), including technical reports and process specifications, • Look for continuous improvement opportunities through Lean Waste reduction, 5S value stream mapping or other lean principles, • Ensure quality is maintained, • Collaborate with other engineering resources to ensure efficient production, • The ideal candidate has a strong understanding of manufacturing equipment and processes, excellent problem-solving abilities, and a keen eye for detail., • Associates degree in relevant field with related work experience., • Knowledge of how mechanical systems and processes work., • Comfortable working in a fast-paced environment., • Exceptional organizational and time management skills, • Bachelors in mechanical or Industrial engineering, • Required to sit, stand, and walk; for up to 8 hours per day., • Ability to work in a high volume and high stress environment., • Continuous use of the hand, arm, and fingers to operate a computer keyboard, telephone, and other office equipment., • Ability to lift up to 20 pounds occasionally., • Ability to communicate professionally, in written and oral communications.

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary Reporting to the Validation Senior Manager, the Validation Engineer (Manager, Validation) plays a key role in supporting LOTTE Biologics' mission as a Contract Development and Manufacturing Organization (CDMO) by ensuring robust and compliant validation of equipment, utilities, and facilities across multiple client programs. This role partners cross-functionally with Manufacturing, Quality, Engineering, and other departments to plan, manage, and execute commissioning, qualification, and validation activities. The individual will be responsible for developing and executing validation deliverables for new and existing equipment, supporting validation master and project plans, and driving process and project improvements that enhance reliability, compliance, and efficiency. The Validation Engineer (Manager, Validation) may also provide day-to-day coaching and technical guidance to junior team members and contractors during qualification activities, ensuring adherence to validation standards and best practices. Duties & Responsibilities • Develop and execute validation protocols, field activities, and final reports for, but not limited to:, • Equipment, utility, and facility system qualifications, • Requalifications and in-process equipment, • Airflow visualization studies and temperature mapping, • Utility sampling and steaming process equipment and autoclaves, • Lead and document validation activities in compliance with current Good Manufacturing Practices (cGMPs), LOTTE directives, and applicable regulatory expectations., • Investigate process and quality issues, determine root causes, and implement effective corrective and preventive actions., • Identify and define process improvement and project optimization opportunities to enhance quality and efficiency., • Develop project plans, schedules, and timelines; monitor progress and ensure milestone completion., • Collaborate across functional teams to align validation activities with manufacturing and quality objectives., • Communicate project status, risks, and outcomes effectively to stakeholders and management., • Ensure validation and project documentation is accurate, complete, and compliant with data integrity and GDP standards., • Maintain a safe working environment and follow all company safety policies and procedures., • Operate equipment to perform operational qualifications and thermal mapping as required., • Record and review data following Good Documentation Practices (GDP)., • Conduct investigations and support CAPA implementation as required., • Author and revise SOPs, training materials, and change control documentation related to validation activities., • Serve as a Validation Subject Matter Expert (SME) during regulatory and client audits and support timely resolution of audit findings., • Evaluate and assess change control requests in accordance with validation procedures and recommend appropriate actions., • Maintain current knowledge of LOTTE directives, industry standards, and global regulatory guidance related to validation., • Act as the Validation Services designee when qualified and assigned., • Bachelor's degree in Engineering, Chemistry, Biological Sciences, or a related technical discipline, with relevant validation experience in the biopharmaceutical or pharmaceutical industry; or, • Associate's degree in a technical field with direct validation experience in a cGMP-regulated biopharmaceutical environment., • Minimum of 5 years of hands-on validation experience in a regulated pharmaceutical, biotechnology, or medical device environment, with demonstrated knowledge of GMP operations and equipment qualification., • Comprehensive understanding of equipment, utility, and facility qualification principles within a cGMP biopharmaceutical or CDMO environment., • Strong knowledge of validation lifecycle concepts, including risk-based and science-based approaches (e.g., ASTM E2500)., • Familiarity with regulatory and industry guidance (FDA, EMA, ICH Q7/Q9/Q10, ISPE Baseline Guides)., • Experience supporting regulatory and client audits, including presenting validation data and documentation., • Ability to manage multiple concurrent validation projects while maintaining quality and compliance., • Proficiency in authoring and reviewing validation protocols, reports, and SOPs with a focus on accuracy, clarity, and data integrity., • Strong analytical and problem-solving skills with the ability to interpret data and apply sound technical judgment., • Excellent communication, collaboration, and project management skills to effectively engage cross-functional teams., • Working knowledge of Lean or continuous improvement methodologies is a plus., • Familiarity with single-use technologies, biologics manufacturing equipment, and clean utility systems preferred., • Proficiency with validation documentation systems and change control workflows. This position is primarily office-based but requires routine entry into laboratories and manufacturing areas to access instrumentation, perform walkthroughs, and observe validation activities. Appropriate personal protective equipment (PPE) is required. Frequent motions such as lifting, bending, twisting, squatting, walking, and reaching are required. The role may occasionally require unassisted lifting of up to 50 lbs. Office-based work requires extended periods of sitting and frequent use of hands and wrists while working on a computer. Work Environment Work is performed primarily indoors within an office, laboratory, or cleanroom setting. The role involves both independent work and frequent collaboration with other teams. Walking between buildings and controlled environments is required to support on-site activities. Supervisory Responsibilities This role does not include formal people management responsibilities; however, the role will provide technical guidance, mentorship, and day-to-day coaching to junior team members and contractors, ensuring adherence to validation best practices and company standards. Travel <5% Travel Required Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job DescriptionSalary: Title: Staff 2 Engineer/Scientist Location: Syracuse, NY Job Type: Regular Full-Time Whats the Opportunity? Anchor QEA is seeking a full-time scientist or engineer to join our offices in Syracuse, NY, or Bellingham, WA. The applicant will have 0-5 years of experience providing technical contributions to projects, using code to analyze environmental datasets, and supporting the development of mathematical (environmental) models. Successful candidates will have an opportunity to work on a variety of tasks of differing complexities, both independently and in team environments, and learn directly from leaders in the industry. We are interested in a candidate that has the capacity to grow, is a quick learner, is detail-oriented, is a committed team player, has a strong interest and experience in computer coding and related technologies, and possesses strong written and verbal communication skills. Responsibilities: • Analyze and interpret environmental data using statistical, coding, and visualization tools including R and Python., • Develop and apply mathematical models, including preparing inputs, processing outputs, interpreting and presenting results, and communicating findings to technical and nontechnical audiences., • Support internal software and data resource development by becoming proficient in existing scripting tools and contributing to the design and maintenance of new tools, processes, and code libraries., • Assist with the preparation of technical documents, including sampling and analysis plans, remedial investigation and feasibility study reports, and data summaries., • May participate in field assignments for environmental sampling (soil, sediment, groundwater, and surface water), equipment calibration, and data collection; fieldwork may account for up to 25% of time and include travel. What Are We Looking For? Ideal candidates will have the following: • Bachelors or Masters degree in environmental science, environmental or civil engineering, computer science, chemistry, mathematics or a related field (Masters preferred), • 0 to 5 years of relevant professional experience, • Proficiency in one or more scientific computing languages (e.g., Python, R, MATLAB, Julia, C/C++, Rust) and related libraries such as Matplotlib, Tidyverse, NumPy, or Pandas, • Familiarity with software development concepts such as DevOps, CI/CD, cloud computing, API integration, or open-source collaboration, • Experience in applying statistical analysis and environmental modeling methods, particularly for contaminant fate and transport in aquatic systems, • Exposure to in-water and upland remediation projects, including environmental sampling, data analysis, and feasibility studies; experience with contaminated sediments preferred, • Strong technical writing skills for planning documents and regulatory reports, • Proficiency in Microsoft Office applications, • ArcGIS experience a plus, • Critical thinking and strong problem-solving skills, • Strong written and verbal communication skills, • 40-hour HAZWOPER certification (preferred; may be provided upon hire), • Ability to travel for field projects (up to 25%, depending on location and project needs) What Can You Expect? A collaborative work environment where we encourage everyone to bring their authentic self. We offer competitive compensation and benefits. Benefits detailed below. Who Are We? Anchor QEA provides environmental planning, science, and engineering consulting services with the mission of transforming our environment and communities with integrity and vibe. With more than 500 people in offices across the United States, our collective vision is to be an inclusive, sustainable, and growing environmental innovator making generational impacts. By embodying our core values, we strive to be our clients first choice for solving their most challenging problems and to be our employees reason to be excited about going to work each morning. Learn more about Anchor QEA at . How to Apply? Apply online through Anchor QEAs Open Positions page at . Veterans are encouraged to apply. Applicants with a disability, who require a reasonable accommodation for any part of the application or hiring process, may e-mail their request to Additional Information We work hard to embrace diversity and inclusion. As an equal opportunity employer, Anchor QEA is committed to a diverse, multi-cultural work environment. Anchor QEA does not discriminate in employment based on age, race, creed, gender, religion, marital status, veterans status, national origin, disability or sexual orientation. Employment is contingent upon satisfactory results of a comprehensive background check. Salary and Other Compensation: • Salary Range: 72,000 - $80,000, • Annual Bonus, • Other potential bonus types: Billable Time Bonus, Spot Bonus, Milestone Anniversary Bonus, Receiving Professional License/Certification Bonus, Peer-reviewed Publication Bonus, Employee Referral Bonus. Base Level Benefits for Regular Full-Time Positions: • Healthcare: Medical, dental, vision, basic life and AD&D insurance, • Paid Company and Floating Holidays: 7 paid company and 2 floating holidays annually, • Vacation: 2 weeks accrued paid vacation based on length of service. Vacation may vary by level., • Sick and Safe Time: 80 hours annually

Job DescriptionSalary: $20-23/hr DOE Location: Halifax Fan based at CNY Fabrication LLC: 79 General Irwin Blvd, North Syracuse, NY 13212 Reporting to: Functional Field Service and Test Engineer Hierarchical Manager Chief Engineer Purpose of role: To assemble and test Halifax-fan products at the US manufacturing facility under direct supervision of the Test Engineer. Quality, Cost, Delivery & Safety (QCDS) responsibilities * Quality: Know the design sold, and ensure the tested assembly meets that design 100% of the time. If unsure STOP, clarify and disposition appropriately. * Cost: Work closely with all other departments to share areas of concern with build quality, and seek systemic corrective action that prevents this from repeating. * Delivery: Know and meet the Master Production Schedule (MPS) agreed Test/Fitting complete date. * Safety: Maintain a no compromise Health and Safety compliant work environment. Your workspace must be 5S compliant. Key Requirements and Responsibilities: * Fully Participate as a Member of the Fitting Team sharing responsibility for ensuring deliveries are in line with the MPS (Master Production Schedule). * Work with other members of the Halifax team to ensure all parts are available on time and to the correct specification and cost. * Balance Impellers (Using Halifax Fan Balancing machine) and record quality related data. * Assemble and record quality related build information/data. * Final test (Trim Balance) Halifax Fan products, and record quality related data. * Trouble shoot and rectify fan vibration and/or performance issues prior to shipment. * Validate that the product meets the specification and standards/codes of the product sold. * Ensure zero defects prior to release of an assembly to shipping. * Ensure all documentation is supplied with the product. Knowledge, Skill or Ability required * Needs to be a skilled fitter/assembler of rotating equipment or similar • 3-5 years experience in any similar mechanical role. Desirable 5-7 years experience in a similar role. • Experience using vibration analysis equipment and processes. Able to work on their own using instructions in written or verbal form. * Ability to work safely in often difficult to access locations. * Ability to lift and place parts up to 25lbs.

Job DescriptionDescription: Precast Project Engineer - Civil/Structural Precast Project Engineer – Shape the Future of Concrete Design and Mentor the Next Generation Are you a precast concrete expert ready to lead and inspire? Fisher Associates is seeking a Precast Project Engineer to serve as a Subject Matter Expert (SME) and guide our team in designing and delivering advanced precast and prestressed concrete structures. In this key role, you’ll mentor junior engineers, ensure design excellence, and drive innovation across diverse civil and structural projects. Working with multidisciplinary teams, you’ll develop efficient, sustainable, and code-compliant precast solutions that shape the built environment. Join Fisher Associates, where your leadership, expertise, and passion for precision fuel impactful projects and professional growth. Apply today to advance your career as a leader in precast concrete engineering and help shape the future of infrastructure design About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead and execute precast engineering and design tasks efficiently., • Collaborate with project teams to deliver structurally sound, cost-effective, and visually appealing precast concrete designs., • Perform and review structural analysis and calculations to ensure safety under various loads and conditions., • Select materials and components for precast concrete production that meet strength, durability, and sustainability standards., • Create accurate drawings, plans, and specifications for precast projects aligned with industry design standards., • Support cost estimation for materials, • Support Project Managers and Designers throughout the project lifecycle., • Maintain up-to-date knowledge of codes, technologies, and advancements in the precast-prestressed field., • Promote, utilize and support QA/QC processes to guarantee quality deliverables. Your Impact Matters, Your Career Thrives. Work on engaging precast engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promise any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-HYBRID Requirements: What You Bring, Your Expertise as a Precast Project Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 10 plus years of experience in precast concrete design engineering for transportation infrastructure and underground structures (utility vaults, manholes, drainage structures and pump stations)., • Familiarity with ACI 318, ACI 350, ASCE-7, AASHTO, • Familiarity with IBC codes a plus, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in AutoCAD & RISA 3D, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines., • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionDescription: A Bridge Engineer– Civil/Structural Full-Time | Hybrid Syracuse, NY Launch Your Career & Structural Engineering | Design the Bridges of Tomorrow Are you a civil or structural engineering graduate or early-career bridge engineer looking to gain hands-on experience in infrastructure design? Fisher Associates is seeking a Bridge Engineer I or II (Civil/Structural) with 0–5 years of experience to join our collaborative Bridge and Transportation team. In this hybrid role you’ll work on impactful bridge design and transportation infrastructure projects that improve safety and mobility in the communities we serve. This is an exciting opportunity to launch your engineering career with mentorship, professional development, and a clear path to PE licensure. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Assist with field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 0-5 years of transportation experience, structures/bridge design engineering experience preferred, • EIT preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT) preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to take ownership of projects, prioritize effectively, and thrive in a dynamic, fast-paced environment., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Job Title: Field Construction Inspector (FCI) Location: Syracuse, NY Job Type: Full-time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Field Construction Inspector (FCI) to support railroad safety services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High school diploma or equivalent. Required Experience: Minimum 2 years of experience in one or more of the following, civil construction inspection involving grade separation projects, roadway paving/construction, utility work and/or experience with a Freight Railroad, Regional Short Line Railroad, Transit System, State DOT Highway or Rail Division, Railroad Supplier, Highway/Railroad Contractor, and/or Civil Engineering/Railroad Consultant. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the workplace and change from one task to another as necessary., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and act before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various construction plans, OSHA/Railroad rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize workload to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables, • Thoroughness: Ability to ensure that one's work is complete and accurate. Job Requirements: • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • Strong technical knowledge in Civil Highway Construction, or Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • High level of accuracy and attention to detail; well organized., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes week(s) at a time., • Ability to successfully complete Federal, Client, and/or Company Specific Training. Job Duties: • Provide jobsite coordination., • Provide clear and concise communication with Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough safety briefings with all personnel on each job site., • Enforce all Railroad, State, and Federal Policies., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies., • Enforce Contractor training requirements., • Submit daily field reports detailing Contractor and/or Railroad activities., • Enforce Project Site Safety in accordance Federal, State, Local and Railroad polices. Work Environment: This job operates in a field environment. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions. Keywords: Civil Engineer, Construction Inspector, Construction Foreman, Construction Manager, Project Superintendent, Civil Engineering Technician, Safety Manager, Safety Inspector, Assistant Division Engineer (ADE), Assistant General Manager (AGM), Assistant Roadmaster, Bridge Inspector, Bridge Manager, Bridge Maintainer, Bridge Supervisor, Division Engineer (DE), Employee In Charge (EIC), Flagger, Flagging, Flagman, Flagmen, Flag Person, Foreman, Foremen, General Manager (GM), Maintenance Of Way (MOW), Manager Track Maintenance (MTM), Manager Track Projects (MTP), Rail, Railroad, Railroad Project Manager, Railway, Railway Project Manager, Roadmaster, Roadway Worker, Roadway Worker In Charge (RWIC), Roadway Worker Protection (RWP), Safety, Signal Inspector, Signal Maintainer, Signal Manager, Signal Supervisor, Track Inspector, Track Maintainer, Track Manager, Track Supervisor. Safety Commitment: All employees of all levels are to always remain committed to safety while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important, and no service is so urgent that we may not take the time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true to our commitment to being the leader in safety throughout the railroad industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/orientation, gender identify, age, veteran status, national origin, or any other status protected by law or regulation. Job Posted by ApplicantPro

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Infrastructure Engineer is responsible for the ongoing support, maintenance, and enhancement of both on-premises and cloud-based server hosting environments. This role involves designing, deploying, upgrading, and securing server infrastructure, including all associated hardware and software components. The engineer ensures the development of highly available, scalable, and secure infrastructure solutions, incorporating effective disaster recovery strategies. This position collaborates closely with IT Support, Business IT Analysts, Networking, and Cybersecurity teams to ensure seamless and uninterrupted operations. This is a hybrid position which requires employee presence 50-100% of the time. Duties & Responsibilities • Manage Windows updates, assist with Exchange Management console., • Manage IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs., • Design, develop, and deploy modular cloud-based systems., • Responsible/Accountable for server/application builds and qualifications for manufacturing and site cloud applications., • Manage Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways., • Maintain all system backups and participate in Disaster Recovery planning and execution., • Analyze, troubleshoot, and remediate server hardware/system related issues., • Support existing systems - proactively manage and maintain multiple systems to ensure performance and availability., • Work independently on assignments where considerable judgment and initiative are required in resolving problems and making choices, recommendations, or decisions., • Provide Level 3 support to users., • Provide off-hours support on a rotating basis as needed., • Collaborate with partners and customers to identify, scope, plan and execute digital modernization and asset life cycle management activities., • Ensure efficient functioning of data storage and process functions in accordance with company security policies and best practices in on-premise and cloud security., • Provides ownership and accountability for Asset Life Cycle Management within ServiceNow., • Owns Active Directory, Time synchronization with NTP, Network Domain and Domain Controllers in Windows environment., • Interact with clients, provide cloud support, and make recommendations based on client needs., • Performing/Assist in cloud infrastructure upgrades and updates to maximize system efficiency while minimizing downtime., • Work closely with IT Specialists, Engineering, Quality Assurance, and Validation teams in assessment, recommendation and implementation of computerized system applications that supports site Business and Manufacturing processes., • Bachelor's degree in Computer Science or Information Technology preferred; in lieu of a degree, a minimum of 3–5 years of high-level, hands-on IT experience is required., • Azure, AWS, or GCP certifications preferred., • Strong problem-solving skills, firm understanding of how to properly troubleshoot problems with as minimal client impact as possible, • Excellent project management, verbal communication, documentation, and technical writing skills, • Strong technical problem-solving abilities, written and verbal communication skills, • Demonstrated success of leading effectively in a complex matrix project team environment, • Team player with an emphasis on both knowledge sharing and learning, • Knowledge of Windows Operating System, Domains, and Group Policies, • Knowledge of Networking, Network Switches, Network Firewalls, IIS (Internet Information Services), Wireless Networks, and Gateways, • Experience and/or substantial understanding of industrial IT Datacenter, Physical and Virtualized Servers, Virtualization Clustering, and SANs, • Experience with Data accessing, storing and security within a cloud environment, • Skilled in Active Directory, Time synchronization with NTP, Network Domain, Domain Controllers, Networks, and Databases, • Ability to work in a diverse work environment, manage multiple priorities, and at times, be self-directed, • Familiar with cyber security best practices and industry-standard tools, • Experience with VPN, Routers, and Routing Protocols, • Perform in depth systems analysis on a multitude of technology devices, operating systems and software., • Ability to document, create, analyze and test computer systems, programs, software., • Exceptional understanding of advanced networking, including on-premise/cloud enterprise-grade infrastructure, as well as cloud-based network 'appliances' and interfaces, • Knowledge of integrating networking basics and virtual networks with cloud services, • Familiar with common languages (i.e. Python, Java, Golang, or Ruby) used in cloud computing, • In-depth, advanced understanding of the AWS/Azure ecosystem and technologies and how to apply them in reliable and efficient means are a strong plus, • Hands-on experience with Cisco appliances, ability to work within the CLI, are a strong plus Office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding is required. Work Environment This position is based indoors and the employee will primarily be working with others, but also independently. This position requires employee presence, on site 50-100%. This position is a team & project-based position that will require occasional shift work, weekends, and holidays. Travel <5% travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job Description We are LOTTE BIOLOGICS! Delivering Therapies That Enable a Healthier World. A new company, built on 80 years of tradition. We embody our core values of being Inspired by Science, Embracing Diversity, Fostering Talent, and Connecting Lives. Our mission is to be the most trusted partner in the industry, with high standards of quality and continuous innovation, to reliably deliver benefits for patients worldwide. Position Summary The Automation Engineer is a key member of the Automation team supporting manufacturing Process Control Systems and Building Automation Systems at the Syracuse, NY manufacturing facility. The primary role of the Engineer is to lead design, implementation and maintenance efforts for systems that are controlled by Programmable Logic Controllers (PLCs) that support manufacturing and the site buildings. This role will require knowledge of both hardware, software and electrical components associated with the equipment the control system. Computer system validation work associated with commissioning and qualification of systems end to end from specification documents through IQ, OQ PQ is also required. The role will work directly with manufacturing process experts and facility engineers to determine end user requirements, develop robust strategies and solutions, draft specification documents, perform testing, commissioning and qualification activities and work safely and efficiently in a high compliance environment. Training will be provided as necessary to enable skills in specific applications used to support this role. Duties & Responsibilities • Primary responsibility is to lead end to end efforts for the design, build, test, and maintenance of the various Allen- Bradley PLC's and Rockwell applications associated with process control and building automation systems for the site., • Lead the design of vendor Rockwell PLC/ BAS roadmaps to align and integrate with site standards and strategies., • Lead the design and build of hardware Control, Remote IO and Power panels as well as end to end loop drawings for device control points., • Work with various PLC/BAS Vendors/ Integration specialists to ensure a safe and successful implementation effort is achieved., • Investigate the root cause of Automation PLC/BAS problems and propose solution to prevent recurrence., • Draft and maintain living and project documentation for managed systems including design specifications, qualification documents and knowledge base articles., • Conduct all job activities in accordance with cGMP and EHS requirements., • Provide training of automated solutions with Automation and Instrumentation staff to ensure understanding how the PLC/BAS functions to assist with troubleshooting during off hours., • Research and propose new PLC/BAS technologies to ensure cost reduction and increased reliability., • Advanced knowledge of engineering or sciences generally attained through studies resulting in a B.S. in, engineering, science, biochemistry or related discipline or its equivalent is highly desired., • Hardware & software design, implementation and troubleshooting experience 5+ yrs., • Knowledge of Rockwell Allen Bradley technologies, application and products required. (Studio5000, Factory Talk View SE, Thin Manager, Factory Talk AssetCentre, PlantPAx, • Experience in system and hardware refreshes from legacy to current technologies for PLC/BAS Systems, • Ability to develop and execute innovative PLC/BAS solutions for continuous improvement., • Quote/ Proposal review experience to ensure adequate design meets site budget commitments and project deliverables, • Experience working with PID drawings, electrical layout and wiring diagrams, Industry Design Standards and equipment loop drawings., • Technical problem solving and analysis skills as well as good communications skills (verbal and written)., • Ability to effectively lead or participate in multi-disciplined team environment to achieve goals., • Knowledge and understanding of applicable regulatory requirements. This position is a combination field and office-based position which requires appropriate levels of personal protective equipment (PPE) when field work is required. Frequent repeated motions such as keyboarding are required. Work Environment This position is based indoors and you will primarily be working with others, but also independently and alone at times. This position is a team & project-based role. Travel <5% of travel is required for this position. Target Bonus 10% Work Location: East Syracuse, NY New York Pay Range$76,000—$113,000 USD We are an Equal Employment Opportunity ("EEO") Employer. We believe that women, people of color, veterans and LGBTQ communities must participate in the work we do, so we strongly encourage applications from people with these identities or who are members of underrepresented communities! If this is the work that you want to do, in a culture of inclusion and excellence with the goal of making our world to be a healthier place, then please apply today!

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.