Green jobs in Torrance, California - Page 5Create job alerts

Job DescriptionDescriptionAs an RF Test Engineer, your core responsibility will be to own the design, bring up, and implementation of test fixtures and software for Impulse Space’s wireless products. You will work with RF engineers, RF software engineers, mechanical engineers, and others to meet test needs across a wide range of capabilities. You may work on uplink and downlink radios up to 32GHz, GNSS receivers, desense testing, and coexistence testing. Responsibilities • Work with a cross-disciplinary team to define and implement RF test requirements, implement RF test software architecture, and design and build RF test hardware fixtures., • Implement scripts to control RF test equipment including spectrum analyzers, network analyzers, antenna test infrastructure, power meters, power supplies, and other devices., • Design and implement fixtures to test design compatibility with GNSS constellations and ground station infrastructure, • Work with hardware and software engineers to prepare testing for radiation and ground station test programs, • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or related technical field, • Experience writing scripts for wireless systems or hardware testing infrastructure, • Ability to work in the lab with RF equipment including spectrum analyzers, signal generators, and software defined radios, • Proficient in testing and troubleshooting RF devices, • 2+ years experience writing Python, LabView, TILE, or other test software, • Strong understanding of RF system parameters such as channel power, EVM, modulation, and bandwidth, • Experience writing and documenting RF test procedures for use by other engineers and technicians, • Experience testing and troubleshooting microcontrollers and/or FPGA's, • Familiarity working with embedded Linux, • Experience with common RF protocols like SRS4, DVBS-II, and CCSDS, • Experience with GNU radio flowgraph development and troubleshooting, • Familiarity with satellite spectrum licensing laws, agencies, and standards, • Experience testing RF devices for regulatory compliance, • Experience in a startup or agile development environment Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We design, build, and test next generation weapon systems to give America and its Allies a definitive edge in defense capabilities. Manufacturing Engineer, PCBA Castelion is seeking a Manufacturing Engineer to drive the development and implementation of manufacturing processes for printed circuit board assemblies (PCBA) and complex electronics hardware. This role will support both in-house and supplier SMT assembly, board bring-up, validation, and qualification as we transition designs from prototype to scalable production in support of next-generation defense systems. Key Outcomes for 2026 • Establish In House PCBA Capability – define, document, and implement procedures, work instructions, tooling, and process flows for bringing up prototype boards, performing repair/rework, and executing validation tests., • Establish & Qualify a Supply Chain for Prototype and Production PCBA – identify, evaluate, and onboard supplier partners for PCBA services that align with product complexity, lead time needs, and quality/risk requirements. Define supplier qualification criteria (capability matrices, certifications, workmanship standards, test coverage, inspection tools) and establish supplier audits, capability studies, and baseline process validations., • Deliver All PCBA Hardware On-Time with Zero Defects – drive, track and report build execution for all avionics PCBA hardware to meet development, test, and qualification milestones. Establish and enforce key quality checkpoints to detect and resolve defects before delivery to integration Responsibilities • Assembly & Test Procedure – create and maintain work instructions, bill of materials (BOM/MBOM), assembly and test procedures, fixture/tooling spec sheets, and process flows for production and prototype builds., • Supplier Development & Support – partner with supply chain to establish process capability, define quality/test criteria, and qualify vendor lines for production builds., • Testing & Validation – develop functional and environmental test plans for PCBA, including test fixture development, automated test systems including HALT/HASS, and test data analysis., • Bachelors degree in mechanical, Electrical, Manufacturing, or related Engineering discipline., • 3+ years of experience in electronics manufacturing engineering with emphasis on PCBA, SMT processes, board test, and validation., • Hands-on experience developing production processes for PCB assembly and test., • Strong problem-solving skills and electrophysical troubleshooting ability., • Excellent written and verbal communication skills., • Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support., • High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity., • Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity. ITAR Requirements All employees are granted long-term stock incentives as part of their employment at Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The CNC Machinist will manufacture and assemble parts critical for the rapid prototyping of Space Kinetic's core technology, intent is to be able to iterate quickly through different designs, and this role will directly support the engineering team as we head towards flight. You will work quickly to assimilate into the Space Kinetic culture, understanding our prototyping needs, and start generating CAM packages for manufacturing. You'll begin by utilizing our current CNC Mills and lathes (3 brand new Okumas, and a mix of older machines (Haas, Okuma, Fadal) to produce essential components, aiming to contribute to the next prototype iteration. Ideal candidate will be able to program 3 or 5 or 7 axis in Mastercam and be experienced setting up and operating one or more of the following Okuma Multus B300 Millturn, Okuma Genos M560V-5AX, Okuma Genos M660 CNC machines. Finally, you will play a pivotal role in building a prototype poised for flight testing, refining and iterating designs to perfection. Your expertise will directly impact the speed and quality of our prototyping efforts, pushing the boundaries of what's possible in space today. What It Takes: • Experience: Minimum 8 years as a Machinist, proficient in Mastercam (or similar CAM package)., • CNC Expertise: Extensive experience with 3 axis CNC mills and lathes. 5-axis CNC mills and Mill-Turn lathes a (bonus)., • Setup Proficiency: Skilled in creating setups for complex parts while maintaining tight tolerances., • Precision Milling: Aerospace tolerances., • Leadership: Experience training and mentoring machinists., • Project Delivery: Consistent record of meeting project milestones and driving team success., • Problem-Solving: Strong analytical skills with the ability to work independently., • Communication: Excellent written and verbal communication skills, with a collaborative team-oriented approach., • Core Values: Commitment to integrity, honesty, and high standards for quality and precision., • Adaptability: Flexible, open to feedback, and receptive to innovative ideas., • Compliance: Must be a U.S. citizen, national, or lawful permanent resident to meet U.S. Government export regulations., • Competitive Base Salary + Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$100,000—$160,000 USD

Job DescriptionDescriptionAs a Senior Mission Design Engineer at Impulse Space, your core responsibility will be to design and optimize in-space servicing missions which meet or exceed the requirements of potential customers. This role is part of the Product Management team but will require working closely with multiple teams including the Business Development and Engineering teams. This role will support the Business Development team in proposal development and be responsible for ensuring the mission designs and solutions proposed are technically sound. Some travel to interface directly with customers may be required. Responsibilities • Create mission designs which efficiently accomplish the stated goals of potential customers, • Maintain familiarity with the technical performance capabilities of Impulse’s space vehicles, • Develop tools to efficiently analyze, interpret, and present mission design results, • Assist in the effort of incorporating mission design technical details into written proposals, • Meet with customers to collect requirements and hear feedback regarding proposed mission designs, • Analyze proposed mission designs for effectiveness and identify areas of improvement, • Assist the Engineering team in the effort to continuously improve the spacecraft simulation and trajectory optimization software suite, • Work closely with the Business Development team to understand the needs of each customer and agree on the best approach for each proposal opportunity, • Examples of technical effort the mission design process may include: high-level CONOPs creation, maneuver design and trajectory optimization, requirements compliance verification, CAD fit checks, propellant budgeting, power budgeting, link budgeting, etc. Minimum Qualifications • Bachelor’s degree in a technical field, • 4+ years of experience working in a technical role, • Ability to communicate technical material clearly and professionally, • Working knowledge of orbital mechanics and spacecraft operations, • Functional knowledge of spacecraft systems design and payload accommodations, • Proficient in at least one programming language with a preference for Python Preferred Skills and Experience • Master’s degree in a technical degree area, • Experience in one or more customer-facing roles, • Experience assembling spacecraft, overseeing the assembly of spacecraft, or integrating payloads onto spacecraft, • Experience operating spacecraft on orbit, • General familiarity with the space industry, • Demonstrated ability to operate in a startup environment, • Experience operating CAD software Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Ground Software Engineer, you will create and implement intuitive, high-performance user interfaces, utilizing time-series databases for real-time testing and interfacing with space vehicles. You will design software systems that enable operators to conduct missions reliably and efficiently. Your work will support a wide range of activities, from near-Earth payload deliveries to geostationary orbit operations. Responsibilities • Design, develop, integrate, test, and deliver large-scale ground software and mission control systems, including operator GUI’s and automation tools, • Develop and implement software tools for operational automation, to reduce day-to-day operator responsibilities, • Support design and operation of the ground segment, including command and control, mission planning, mission data processing, and the associated infrastructure to support all activities., • Develop continuous integration and testing systems in order to confidently deploy new software., • Support end-to-end spacecraft testing to prepare Impulse hardware for flight, • Implement specific mission data processing applications into existing systems to support payloads and end data users, • Manage mission databases and data distribution, • Integrate and test ground software with satellite, ground stations, and network infrastructure, • Implement real-time data acquisition, processing, and visualization systems for satellite telemetry Minimum Qualifications • Bachelor’s degree in Computer Science, Math, Physics, Engineering, or related degrees., • 2+ years of experience with spacecraft, ground station, or other communication system operations, • 2+ years of experience in software development encompassing both back-end and front-end development, as well as database management., • Demonstrated experience working in Python for backend services, scripting, and data processing, • Experience with modern web frameworks such as Vue.js or React for building responsive UIs, • Experience with networking protocols (UDP, TCP, etc) Preferred Skills and Experience • Demonstrated experience working with time-series databases, • Familiarity with Docker and Kubernetes containerization and service orchestration systems., • Experience using Grafana and setting up Grafana dashboards, • Familiarity with modern cloud providers, preferably AWS, • Strong knowledge of satellite communication protocols, such as CCSDS, • Familiarity with source code configuration management and version control concepts Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Test Specialist at Impulse, you will perform a wide range of spacecraft component and assembly testing while developing and maintaining state-of-the-art test equipment. You will work closely with engineering to improve overall test processes across the company. Responsibilities • Fabricate, assemble and test high quality, high reliability propulsion components, combustion devices and electromechanical assemblies, • Perform verifications of flight hardware and document results in a clear, precise and complete manner, • Improve processes to enable automated acceptance testing, • Respond to production related non-conformances and drive to root cause and disposition, • Maintain process planning documents and action feedback when necessary, • Perform maintenance and calibration activities for automated acceptance testing equipment, • Work with engineers to create 2D drawings from existing 3D models by applying established drawing specifications and standards, • Provide training and guidance to other technicians Minimum Qualifications • High school diploma or equivalency certificate, • 7+ years of experience working on propulsion or electronic assembly and/or test production environment or a bachelor's degree in an engineering field, • Deep knowledge of the safe operation of pressure, electrical, power and data acquisition systems, • Proficient with wiring and electrical systems, • Proficient with fabricating and acquiring parts to build test capabilities from basic requirements with minimal direction from others, • Ability to troubleshoot problems with fluid and electrical systems and implement scrappy solutions Preferred Skills and Experience • Associate degree or bachelor’s degree in mechanical, aerospace, or electrical engineering, • 9+ years of demonstrated professional experience providing support for the production and test of highly complex components (e.g. valves, actuators), • Experience designing tooling in a hardware development environment, • Flexible schedule and willing to travel as needed Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Quality Engineer at Impulse, you will own the connection between design intent, manufacturing execution, and flight performance. You will work hands-on with technicians, manufacturing engineers, and design teams to prevent defects before they occur, rapidly diagnose failures, and continuously improve hardware reliability across spacecraft builds. Responsibilities • Partner with design, manufacturing, and integration teams to ensure spacecraft hardware is built reliably and repeatably from prototype through production, • Identify, investigate, and eliminate build defects through structured root cause analysis and corrective actions, • Develop risk-based inspection, acceptance, and quality control processes aligned with mission reliability requirements, • Support hardware integration, test, and environmental campaigns by diagnosing anomalies and driving resolution to closure, • Provide design-for-reliability and manufacturability feedback during design reviews and build planning, • Monitor hardware and supplier quality performance, using production and test data to drive continuous improvement Minimum Qualifications • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Manufacturing Engineering, or related field, • 3+ years of experience in hardware manufacturing, aerospace, automotive, or high-reliability systems, • Demonstrated experience supporting production builds, integration, or test of complex mechanical or electromechanical systems, • Strong problem-solving skills with demonstrated root cause analysis experience Preferred Skills and Experience • 4+ years of demonstrated build reliability experience with spacecraft, launch vehicles, aviation, robotics, or defense hardware, • Familiarity with AS9100, ISO 9001, or similar quality systems (practical application preferred over documentation focus), • Demonstrated experience with reliability engineering concepts (FMEA, reliability growth, Weibull analysis), • Demonstrated background working closely with technicians and production teams, • Demonstrated experience supporting rapid development or prototype-to-production transitions Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description EXPERIENCE: • Effective computer skills; Microsoft office and other company software requirements (ASI experience a plus), • Effective communication skills both verbally and in writing with superiors, colleagues and individuals inside the company, • Highly organized with the ability to prioritize and plan work, • Individual must be able to multi-task and work in a fast paced environment, • Must be able to frequently lift and move up to 50 lbs., • Previous manufacturing background a plus RBC Bearings offers a competitive benefits package. Interested candidates may send resumes to: Come in person to Industrial Tectonics Bearings at 18301 S. Santa Fe Ave. Rancho Dominguez, CA 90221 and apply Monday-Friday 8:00am-4:00pm. You may also fax your resume to (310) 537-2647 or call Human Resources at 310-537-3750 x1616. Qualified applicants should submit their resume to (alternatively, you can contact the Human Resources Dept. at 310-537-3750). You can also visit our career opportunities page at: We are a subsidiary of RBC Bearings, Inc. (ROLL). RBC Bearings is an equal-opportunity employer. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. MIN: $18 to $21 per hour **Please note that the salary range information is only applicable to California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Equal Opportunity Employer Industrial Tectonics Bearings is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Job DescriptionDescriptionAs an FPGA engineer at Impulse Space, you will be responsible for taking complex protocols and algorithms and accelerating them into high throughput FPGA blocks. Working closely with RF software engineers you will write libraries to help bridge the gap between fabric acceleration and high-level applications. Your code will not only fly in space but become the backbone for ground systems that will push millions of mission packets per second. Responsibilities • Design and implement all layers of satellite communication modems from DSP blocks to network protocols., • Analyze timing and resource requirements for existing and next generation RF products., • Create end-to-end test harnesses with integrations into CI/CD pipelines., • Work closely with RF software engineers as you design high performance libraries to bridge the gap between FPGA and SOC. Minimum Qualifications • Bachelor’s degree in computer science, electrical engineering, math or other engineering discipline., • 2+ years of professional FPGA development experience., • Experience using Verilog, SystemVerilog, or VHDL., • Experience developing for Xilinx FPGA/SOC products. Preferred Skills and Experience • Experience with Xilinx Vivado and Petalinux tooling., • Demonstrated experience of DSP fundamentals such as filters, and PLLs., • Exposure to fundamentals of satellite communications, encoders, PSK, symbol synchronization., • Experience developing software for embedded systems in C++ or C., • Experience with FPGA block stimulation and test benching. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an IT Systems Engineer at Impulse, you are responsible for designing, implementing, and improving infrastructure platforms that support engineering, manufacturing, and corporate operations. This role focuses on building reliable, scalable systems across hybrid datacenter and cloud environments while reducing operational overhead through automation and strong engineering practices. Systems Engineers translate organizational requirements into technical solutions and are expected to independently deliver infrastructure projects, improve platform reliability, and establish repeatable deployment patterns. The role emphasizes hands-on engineering combined with operational awareness in environments where infrastructure performance directly impacts engineering execution and production timelines. ResponsibilitiesInfrastructure Design & Implementation • Design and deploy infrastructure solutions across compute, identity, storage, and cloud platforms., • Implement new services and expand existing environments to support organizational growth., • Engineer highly available systems aligned with established architectural standards., • Lead infrastructure upgrades, migrations, and modernization initiatives., • Validate performance, resiliency, and operational readiness of deployed systems. Platform Engineering, • Build and maintain standardized infrastructure configurations., • Develop repeatable deployment methodologies for servers and platform services., • Improve scalability and consistency across environments., • Integrate on-premises infrastructure with cloud services and identity platforms., • Support lifecycle planning and platform evolution. Automation & Infrastructure Engineering, • Develop automation for provisioning, configuration, and maintenance workflows., • Implement scripting and tooling to eliminate manual operational processes., • Contribute to infrastructure-as-code and configuration management initiatives., • Improve deployment speed and reliability through automation practices. Automation is considered a core engineering responsibility at this level. Reliability & Advanced Troubleshooting • Resolve complex infrastructure issues spanning multiple systems and dependencies., • Perform deep root-cause analysis for recurring or high-impact incidents., • Design improvements that prevent future operational failures., • Collaborate with network and security teams during incident resolution. Security & Compliance Integration, • Engineer infrastructure aligned with cybersecurity and regulatory requirements., • Implement secure identity, access control, and system hardening practices., • Support compliance initiatives through technical design and system configuration., • Ensure infrastructure solutions support controlled or regulated data environments.Cross-Team Collaboration, • Partner with engineering teams to understand infrastructure requirements., • Support deployment of systems used in engineering and operational environments., • Work closely with network engineering, security, and service delivery teams., • Provide technical mentorship to administrators and junior engineers. Technology Environment (Representative) Infrastructure environments supported by this role include technologies such as: • Microsoft Windows Server, • Linux systems administration, • VMware vSphere or equivalent enterprise virtualization platforms, • Microsoft Azure and Entra ID, • Active Directory and Group Policy, • Microsoft Intune or modern endpoint management, • NetApp storage platforms, • Enterprise backup solutions (e.g., Veeam or equivalent), • PowerShell and automation tooling, • Experience supporting and implementing enterprise infrastructure., • Demonstrated experience designing and deploying infrastructure solutions., • Strong Windows Server administration and architecture knowledge., • Experience administering Linux systems., • Experience operating virtualization platforms in production environments., • Experience automating infrastructure tasks using scripting (PowerShell, Bash, or Python). Preferred Skills and Experience • Strong troubleshooting skills across integrated systems and services., • Understanding of networking fundamentals and infrastructure dependencies., • Experience supporting engineering, manufacturing, or lab environments., • Hybrid cloud deployment and identity integration experience., • Experience with enterprise storage architecture., • Familiarity with configuration management or infrastructure-as-code practices., • Experience operating in regulated or compliance-driven environments. Operational Expectations, • Participation in on-call rotation supporting infrastructure services., • Ability to support infrastructure deployments during maintenance or operational windows., • Work performed in datacenter, lab, and operational environments as required., • Ownership of infrastructure projects from planning through implementation. Additional Information: Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs a Test Automation Engineer at Impulse, you will own all aspects of test and automation software design, implementation and operation while working closely with a fast paced, agile team. Responsibilities • Work on a full spectrum of software, including near-real time data acquisition and control software to user-facing GUI’s and tools., • Actively work with the test operations team that uses your software daily to support testing operations., • Take part in the complete test program lifecycle including design, integration, testing, deployment, debugging, and finding novel solutions to late-breaking changes or issues., • Design and develop software and tools in support of testing operations., • Review code written by others, and write reviewed code yourself., • Work onsite in a fast-paced, challenging environment., • Resolve technical issues with innovative and resourceful solutions. Minimum Qualifications • Bachelor’s degree in engineering, computer science or related field., • 2+ years' of demonstrated proficiency with python, or an object-oriented programming language & demonstrated hands-on experience operating the software., • Experience developing user-facing software applications related to networking, hardware control and data acquisition., • Experience with software best practices and workflows, including git. Preferred Skills and Experience • Demonstrated ability of taking project ownership and working well in small teams., • Proficient with basic principles of data acquisition and control., • Master’s degree in electrical, software, mechanical, or aerospace engineering., • Familiarity with Propulsion Systems development testing., • LabVIEW certification (CLAD, CLD, CLA)., • Experience with Real-Time Operating Systems., • Hands-on experience with design, build, and operation of electrical systems. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job DescriptionDescriptionAs an Embedded Software Engineer your core responsibility will be to write code that runs on custom avionics hardware for executing flight and ground test functions. You will work with avionics hardware engineers, GNC engineers, propulsion engineers, and others to develop performant and maintainable solutions. You will have the opportunity to contribute to many aspects of spacecraft development, including architecting new systems, doing quick prototypes, doing rigorous flight projects, and controlling flight hardware during ground tests. Responsibilities • Implement and improve low-level processor functions such as controls of peripherals, and setup of communication interfaces., • Implement and improve functions such as closed loop control of physical processes, and detection/response algorithms for failures such as broken sensors or radiation upsets., • Provide technical input on new system developments from an embedded software perspective., • Write scrappy code to support development testing of avionics and propulsion devices., • Bachelor's degree in computer science, engineering, math, or scientific discipline; OR 2+ years of professional experience building software in lieu of a degree, • Experience using oscilloscopes, logic analyzers, hardware debuggers, and source-level debuggers to troubleshoot problems at all layers of the stack., • Knowledge of and experience with communication protocols including I2C, CAN, SPI, UART, etc., • Knowledge of microprocessors and microcontrollers, with an understanding of components such as caches, buses, memory controllers, and DMA., • Experience developing low-level drivers for camera modules (e.g., MIPI CSI-2, USB, SPI, I2C)., • Understanding of sensor communication protocols and interfacing with custom or commercial image sensors. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Job Description Essential Duties Will run pick/pull/pack reports from ERP system (AS400). Make shipping boxes from flat stock Verify part numbers, obtain signed shipping document Pack and seal shipping boxes, prepare for necessary logistics, make shipping labels Ability to drive company vehicles with parts to logistic carrier locations; vendor deliveries and pick up Pick, pack, palletize, and stretch wrap all customer orders due to ship each day Create all shipping documents for customer orders Arrange and schedule freight trucks to pick up customer orders Invoice customer orders Material handling as needed for manufacturing Weigh (verify count) all product shipping to vendors and create shipping documents for product Weigh (verify count) all product returning from vendors Open, maintain, and receive product on purchase orders for all product items. Open and maintain work orders. Data entry for production Supply assembly department with customer box labels Receive and check in product from vendors. Verify against pack lists. Load and unload trucks Receives incoming and raw materials and supplies. Examines incoming materials to verify completeness and accuracy in quantity against shipping documents. Disassembles wooden or cardboard containers and removes materials from containers Counts, examines weighs and check against shipping documents or material transfer forms Fills out reports to document shortages and damaged material received Maintains records of materials and supplies received Moves goods to corresponding destination or to storage To count, examine, weigh and check incoming materials and supplies for damage and completeness against shipping documents. Qualifications Previous warehouse experience preferred Windows Operating system and Windows Office proficient Experience with AS400 or similar MRP system knowledge a plus Demonstrated ability to work well at all levels of the organization Motivated and deal with changing priorities Lifting and moving boxes Bending and stooping to wrap and band pallets for shipping Must be able to stand, walk for long periods and lift heavy items Must be able to read and write English fluently Some overtime may be required (Monday-Saturday) Forklift experience and/or certified MIN: $17.00-$20.00 **Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer Industrial Tectonics Bearings is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: We are seeking an experienced Setup CNC Machinist / Operator to support multi-axis machining operations in a fast-paced prototype and production environment. This is a hands-on role ideal for machinists who enjoy complex parts, tight tolerances, and working closely with engineering teams. Key Responsibilities • Setup and operate multi-axis CNC mills and lathes, including 3-, 4-, and 5-axis equipment, • Perform complete setups including tooling, offsets, workholding, and prove-outs, • Machine complex, tight-tolerance aerospace components from a variety of materials, • Interpret blueprints, GD&T, models, and work instructions to complete machining operations, • Support prototype and short-run production machining, • Perform drilling, tapping, milling, turning, and finishing operations, • Inspect parts during machining to maintain quality and tolerance requirements, • Deburr and finish parts as needed, • Maintain machines and work areas, including chip management and basic preventative care, • Collaborate with programmers and engineers to improve processes and efficiency, • High school Diploma or equivalent, • 8–10+ years of CNC machining experience (setup and operation), • Experience setting up and running multi-axis mills and/or lathes, • Strong blueprint reading and shop math skills, • Experience with 5-axis machining and/or mill-turn equipment, • Prototype or short-run machining experience, • G-code editing and troubleshooting, • Mastercam or CAM exposure a plus, • Experience with a variety of materials (aluminum, stainless, titanium, etc.), • Strong understanding of tooling, feeds/speeds, and workholding, • Ability to stand for extended periods, • Ability to lift up to 40 lbs unassisted, • Frequent bending, reaching, and machine interaction, • Overtime or weekend work may be required based on production needs, • Competitive Base Salary + Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$30—$50 USD

Job DescriptionCX2 is a next-generation defense technology company founded to deliver spectrum dominance for the United States and our allies. CX2’s AI-enabled hardware and software platforms detect, disrupt and defend the electromagnetic spectrum across land, air, sea and space domains. We are seeking a talented FPGA Engineer to design and implement high-performance digital solutions for advanced defense systems. This role supports mission-critical applications including radar, electronic warfare (EW), and communications requiring real-time processing and high-reliability hardware design. Key Responsibilities • Design, develop, and optimize FPGA-based digital systems for real-time defense applications, • Implement RTL designs (VHDL, Verilog, SystemVerilog) for high-speed data processing, • Perform simulation, synthesis, timing analysis, and timing closure, • Develop and integrate DSP algorithms in hardware (e.g., FFTs, filters, modulation), • Interface with high-speed ADCs/DACs, RF front ends, and embedded processors, • Support hardware bring-up, debugging, and validation in lab environments, • Collaborate with RF, systems, and software engineers to ensure system performance, • Document designs, requirements, and verification resultsRequired Qualifications, • Bachelor’s degree in Electrical or Computer Engineering (or related field), • Minimum of 2 years' professional experience within the aerospace & defense industry, • Minimum 2 years' experience using FPGA toolchains (Xilinx Vivado, Intel Quartus), • Proficiency in HDLs (VHDL, Verilog, or SystemVerilog), • Strong understanding of digital design fundamentals (timing, clock domains, pipelining), • Experience with simulation/verification tools (ModelSim, Questa, etc.), • Ability to obtain and maintain a U.S. security clearanceITAR Regulations, • To conform to U.S. Government technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicant must be a US Citizen, Green Card holder, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Bonus Points, • Experience with defense systems (radar, EW, communications), • Knowledge of digital signal processing (DSP) implementation and fixed-point math, • Proficient in scripting languages (Tcl, bash, Python), • Familiarity with embedded software integration on SoCs, • Experience with high-speed interfaces (JESD204, PCIe, Ethernet, DDR), • Familiarity with SoC platforms (e.g., Xilinx Zynq, RFSoC)

Job DescriptionCNC Programmer / Manufacturing Lead Reports to Operations Manager Salary: DOE, $40-60/hr We are seeking an experienced, detail-oriented CNC Programmer to join our Manufacturing team of our aerospace and defense manufacturing facility. This hybrid role emphasizes the CNC programming background, but is an opportunity for an individual to build their career as a high-value Manufacturing Supervisor. This role is critical to the front-end acceptance of client requests and planning/implementation of machined part production, from quoting and router development to CNC programming and first article execution. Ideal candidates will bring experience in both precision CNC Programming and Design For Manufacturability principles, in launching new parts into production efficiently and compliantly. Proficiency in programming 4-5 Axis CNC machines is critical. Opportunity A&R is a contract manufacturer experiencing strong demand growth which we expect to continue for several years. This position offers an awesome opportunity for career development and progressive earning power. Key Responsibilities: CNC Programming & Setup • Working largely with new customer requests, program CNC mill and lathe operations using Mastercam (or Fusion 360), based on customer blueprints and 3D models., • Perform first article setups, dry runs, and edits to validate program accuracy and efficiency., • Conduct in-process inspections to verify dimensions during first article production runs., • Capable of training machine operators on setup sheets, fixturing, and safe operation of new programs., • As Necessary, assist in movement of materials through impacted work centers to ensure customer schedules are met, troubleshoot and address bottlenecked processes/operations., • Maintain revision control for CNC programs and tooling instructions.Manufacturing Lead, • Analyze customer blueprints, 3D models, and specifications to determine manufacturability and generate time/material estimates for quoting., • Develop/Update manufacturing router sequences, Bill of Materials, and Work Centers for new and existing product lines, determining estimated setup and cycle times to maintain an accurate ERP system., • Select tooling, fixturing, and machine allocation based on material and part geometry for the fabrication of machined parts using 2 to 5 axis lathes; 3 and 4 axis horizontal and vertical mills; as well as 5 axis mills and conventional machining equipment, • Collaborate with Customer, Production and Quality teams to ensure DFM (Design for Manufacturability) ensures the most efficient manufacturing methods and techniques. AS9100 compliance., • Organize the machine shop, priorities and workflow to meet customer requirements.Required Qualifications:, • 7+ years of experience in aerospace CNC machining, with demonstrated expertise in CNC programming and setup., • Strong proficiency with Mastercam, or Fusion 360., • Deep understanding of G-code, GD&T, blueprint reading, and aerospace tolerancing., • Experience working in AS9100/AS9102-regulated environments., • Proven ability to estimate machining time, material requirements, and tooling needs for quoting purposes., • Familiarity with various aerospace alloys (e.g., titanium, Inconel, stainless steel, aluminum)., • This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee.Preferred Qualifications:, • Experience in a “Make-to-Blueprint” job shop environment., • Experience and Understanding of Master Routers (i.e. “Item Masters, which require a Bill of Materials and Routing sequences for CNC operations) and/or the willingness/ability to learn., • Working knowledge of MRP/ERP systems (specifically Syteline, or JobBOSS, Epicor, ProShop)., • First article inspection (FAI) process experience per AS9102., • Lean or Six Sigma training is a plus.Key Competencies:, • Strong mechanical aptitude and machining knowledge, • Ownership mindset and initiative in problem-solving, • Ability to work cross-functionally with quality, operations, and sales teams, • Attention to detail in both planning and execution, • Clear, concise technical communication skills (verbal and written)Why Join Us:, • Be a strategic part of launching mission-critical aerospace components, • Hands-on environment with autonomy and impact, • Competitive compensation and benefits package (We Reward Talent), • Fast-paced, growth-oriented company with a strong industry reputation Powered by JazzHR uWG6R0RcKY

Job Description A New Paradigm For Space Operations. Who We Are:Space Kinetic is a cleared, venture-backed startup focused on addressing urgent national security priorities. Our goal is to deliver a suite of asymmetric capabilities for space superiority and missile defense leveraging our proprietary electromechanical deployment system, which enables the rapid deployment of low-cost payloads through space without firing a thruster. Space Kinetic is currently assembling its TRL-5 prototype. Our goal is to leverage this platform to provide the United States with a new tool for securing the space domain & catalyzing the emerging space economy. What You'll Do: The Principal Flight Software Engineer will be required to work in a fast-paced prototyping environment with an aggressive schedule toward flight and should have experience and a general understanding of spaceflight payloads. In this position, you will be responsible for low-level and high-level software in Space Kinetic's products through all phases of the development process. As a Principal, you will be responsible for software designs from concept through production, including product roadmaps, block diagrams, detailed design and coding, analysis, test and qualification. The Principal Software Engineer will serve as the technical leader for the development, integration, and validation of Space Kinetic's electromechanical system. This role is responsible for the architecture, design, and implementation of mission-critical software that enables spacecraft control, autonomy, communication, and safety. The ideal candidate possesses deep experience in embedded real-time systems, software reliability, and spacecraft operations. • Lead the design and development of space Kinetic flight software architecture, including guidance, navigation, control (GNC), telemetry, command, and fault management systems., • Define software requirements, interfaces, and verification strategies in coordination with systems, electrical, and mission engineering teams., • Develop robust, real-time, and fault-tolerant software using C/C++ and/or Rust in embedded or RTOS environments., • Perform software design reviews, code reviews, and verification activities to ensure safety, reliability, and performance compliance with space flight standards (e.g., NASA NPR, ECSS, DO-178C)., • Mentor and guide software engineers through technical leadership, code quality enforcement, and system-level integration., • Support spacecraft-in-the-loop, hardware-in-the-loop (HIL), and flight simulation testing environments., • Contribute to continuous improvement of software development processes, tools, and best practices across the engineering organization., • Participate in mission readiness reviews, anomaly resolution, and on-orbit software updates and maintenance., • Experience with simulation environments and ground software integration., • Excellent leadership, collaboration, and communication skills across multidisciplinary teams., • Strong problem-solving ability and technical judgment under mission-critical constraints., • Bachelor of Science (BS) or Master of Science (MS) degree in Computer Science, Electrical Engineering, or Computer Engineering., • 10+ years of experience developing embedded or real-time software for space, aerospace, robotics, or mission-critical systems., • Proven experience leading software development through all phases of the system lifecycle—from requirements through flight operations., • Strong proficiency in C/C++, with working knowledge of Python or scripting languages for automation and testing., • Familiarity with RTOS, bare-metal programming, or Linux-based embedded systems., • Deep understanding of software reliability, deterministic timing, concurrency, and resource management in constrained environments., • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder)., • Experience with flight software frameworks (e.g., NASA cFS, F' FPrime, or custom architectures)., • Familiarity with model-based systems engineering (MBSE) and interface control documentation., • Knowledge of space communication protocols (CCSDS, SpaceWire, MIL-STD-1553, etc.). *Our vision is unique, and so is the team we're building. If you're driven to succeed in this role, even if your background doesn't fully align with every qualification, we want your application.Where You'll Be: * The position is onsite at our headquarters in El Segundo, CA. Domestic travel may be required (up to ~20% of the year). What We Offer: • Equity-Based Compensation, • Highly Competitive PTO and Holiday Calendar, • Comprehensive Medical, Dental, and Vision Coverage, • Unique Performance-Based Bonus Structure, • Health and Wellness Stipend Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$150,000—$190,000 USD

Job DescriptionDescriptionAs a Flight Software Engineer at Impulse, you will be responsible for the design, development, and integration of the software that powers our Space Vehicles. You will work closely with avionics engineers, GNC engineers, propulsion engineers, and other cross-disciplinary teams to deliver high-reliability, high-performance software for in-space transportation. Responsibilities • Contribute to the design, implementation, integration, and verification of software for:, • Guidance, Navigation, and Control (GNC) algorithms, • Command and telemetry handling, • Mission sequencing, autonomy, and fault management, • Closed-loop control of propulsion, attitude control, and other time-critical systems, • Implement features for Impulse’s real-time flight software framework to meet deterministic performance requirements in space environments., • Develop detection and mitigation algorithms for anomalies such as sensor failures, actuator malfunctions, or radiation-induced faults., • Direct and participate in code reviews, ensuring compliance with software safety, reliability, and maintainability standards., • Support mission operations and troubleshoot real-time issues during ground integration, environmental testing, and on-orbit operations. Minimum Qualifications • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering, or related degrees, • 4+ years writing C/C++ code for an embedded system or vehicle of some kind (robot, car, drone, spacecraft, etc), • Demonstrated understanding of computer architecture, operating systems, data structures, and computer networking, • Experience with Real Time Operating Systems (RTOS) or with Embedded Linux, • Experience using version control, test cases, and other software best practices Preferred Skills and Experience • Proven track record delivering flight software for spacecraft— including launch vehicles, OTVs, upper stages, or other in-space propulsion systems., • Familiarity with NASA cFS, ROS2, or custom middleware for space applications., • Expertise in designing software for deterministic timing and hard real-time constraints. Compensation bands are determined by role, level, location, and alignment with market data. Individual level and base pay is determined on a case-by-case basis and may vary based on job-related skills, education, experience, technical capabilities and internal equity. In addition to base salary, for full-time hires, you may also be eligible for long-term incentives, in the form of stock options, and access to medical, vision & dental coverage as well as access to a 401(k) retirement plan. Impulse Space’s spacecraft manufacturing business is subject to U.S. export regulations including the International Traffic in Arms Regulations (ITAR) and Export Administration Regulations (EAR). This position requires applicants to be either U.S. Persons (i.e., U.S. citizen, U.S. national, lawful permanent U.S. resident (green card holder), an individual granted asylum in the U.S., or an individual admitted in U.S. refugee status) or persons eligible to obtain an export license from the U.S. Departments of State, Commerce, or other applicable U.S. government agencies. Learn more about the ITAR here. Impulse Space is an Equal Opportunity Employer; employment with Impulse Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Flint Green Card Sponsorship Program.

Flint Green Card Sponsorship Program.

Flint Green Card Sponsorship Program.

Flint Green Card Sponsorship Program.

Flint Green Card Sponsorship Program.