Trabajos inspector en Tulsa, OklahomaCrear alertas

Job Description Great Western Trailer (GWT) is actively hiring skilled and motivated Trailer Technicians to join our growing team at our Tulsa, OK facility. If you have experience in semi-trailer maintenance and repair and are looking for a company that values your skills and dedication, we encourage you to apply today. Be a part of our team – Apply now! What’s in it for you? • Weekly Paychecks – Get paid on time, every time., • Weekday Schedule – Monday-Friday, 8:00 AM – 4:30 PM (No weekends!)., • Comprehensive Benefits Package – Health, dental, vision, and life insurance., • 401K, Flexible Spending & Health Savings Account options., • Paid Time Off & Sick Leave – Enjoy work-life balance., • Employee Perks – Discounts, Employee Assistance Program, and a $400 Benefit Card. Who We’re Looking For GWT is looking for dedicated individuals who are: • Quick Learners – Willing to follow instructions, ask questions, and grow their skills., • Team Players – Punctual, reliable, and able to work independently or collaboratively., • Detail-Oriented – Focused on quality, accuracy, and safety. Trailer Technician Responsibilities • Inspect and repair semi-trailers, including brakes, wiring, bodywork, lift gates, and more., • Install and replace add-on components such as toolboxes, winches, and ramp kits., • Perform fabrication and welding as needed., • Complete service reports and ensure all work meets quality and safety standards. Required Qualifications • Reliable transportation to and from work., • Own a personal set of hand tools (except in California)., • Strong mechanical aptitude and experience with semi-trailer equipment and maintenance., • Ability to operate hand tools, power tools, and pneumatic tools safely and efficiently., • Willingness to work overtime when needed. Preferred Qualifications • Valid driver’s license (a plus, but not required)., • 3+ years of experience in semi-trailer repairs., • Certified brake and FHWA inspector or ability to obtain certification., • Industry certifications such as ASE or welding certification., • Bilingual (Spanish) is a valuable asset. Physical Demands & Work Environment • Frequent standing, walking, kneeling, and lifting (up to 50 lbs.)., • Work may be performed in a shop, yard, or mobile service environment., • Exposure to mechanical parts, chemicals, fumes, and varying temperatures., • Moderate to loud noise levels. About Great Western Trailer Great Western Trailer (GWT) is a fast-growing Semi-Trailer Sales, Leasing, Rental, and Service company with 10 locations across 8 states—and more expansions coming soon! We operate in Fontana, CA; Albuquerque, NM; Phoenix, AZ; Grants Pass, OR; Dallas, TX; Houston, TX; Dearborn, MI; Salt Lake City, UT; Oklahoma City, OK; and Tulsa, OK. Apply Today! If you have the skills and passion for semi-trailer repair, we want to hear from you. Join a company that values your hard work and offers opportunities for career advancement. Apply now and take your career to the next level with Great Western Trailer in Tulsa, OK! This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice.

Job Description Location: Tulsa, OK | Type: Full-Time | Pay: $23.00–$30.00/hr We are seeking a dynamic CMM Programmer/Operator to join a local aerospace manufacturing team. This position is responsible for supporting its quality and inspections operations. This position will be responsible for developing and executing Coordinate Measuring Machine (CMM) programs, inspecting precision-manufactured components, and ensuring products meet engineering specifications and quality standards. The ideal candidate will have a strong background in dimensional inspection, CMM programming, blueprint interpretation, and precision measurement within a manufacturing environment. Essential Responsibilities • Program CMMs (Zeiss, Hexagon, Mitutoyo, or similar) using PC-DMIS, Calypso, MODUS, or equivalent software., • Interpret engineering drawings, 3D CAD models, and GD&T per ASME Y14.5 to create accurate inspection plans., • Develop and import CAD-based, offline, and manual CMM programs for new and existing part numbers., • Design and select fixtures, probe configurations, styli, and qualification strategies for complex aerospace geometries., • Verify and prove out programs on the machine, optimizing for cycle time, accuracy, and repeatability., • Perform first article inspections (FAI) per AS9102 and generate complete, accurate FAI reports., • Create and maintain inspection reports, data collection plans, and measurement documentation., • Maintain CMM calibration, verification, and routine maintenance records in compliance with ISO 10360 and company procedures., • Revise programs in response to engineering change orders (ECOs) and drawing revisions, maintaining strict revision control., • Follow AS9100, customer flow-down requirements, and internal quality management system procedures., • Perform other duties as assigned Required Qualifications, • High school diploma or GED required, • Minimum of two years of quality inspection experience in a manufacturing environment, • Ability to read and interpret engineering drawings and technical documentation, • Experience using precision measuring instruments and inspection equipment, • Strong attention to detail and organizational skills, • Basic computer skills, including Microsoft Office, • Excellent communication and problem-solving abilities, • Experience with Coordinate Measuring Machines (CMM) Preferred Qualifications, • 5+ years of CMM programming experience on aerospace components., • Experience with 5-axis CMM, scanning probes, and multi-sensor systems., • Experience inspecting turbine components, structural machined parts, castings, forgings, or sheet metal assemblies., • Certifications such as ASQ Certified Quality Technician (CQT), Certified Quality Inspector (CQI), or Certified Mechanical Inspector (CMI)., • Familiarity with SPC software, Minitab, or QMS tools such as ERP and MES systems., • Experience with Lean Manufacturing, Six Sigma, or continuous improvement methods., • Experience in precision manufacturing, metal fabrication, machining, industrial equipment, or highly regulated manufacturing environments, • Working knowledge of Geometric Dimensioning & Tolerancing (GD&T), • Familiarity with ISO 9001, AS9102, or similar quality management systems, • Experience performing first article, in-process, and final inspections, • Ability to program a CMM independently If interested, send resumes to staylor@nescoresource.com and/or call 918.297.0006 to schedule interview. Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services. Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description At Muncie Power, our products play a critical role in our society by powering the vehicles that develop key infrastructure, putting out dangerous fires, fixing the power lines that power our homes, and hauling away our garbage. Every team member at Muncie Power understands how important the success of our customers is to their communities. And that inherent value is carried throughout each team to ensure we’re providing the best for our customers. WHAT YOU’LL DO Determine whether materials, castings, and purchased components meet required standards and specifications. This position requires strong discipline, attention to detail, and a commitment to accuracy when managing specialized work efficiently and completing tasks on time. You take a careful, methodical approach to work and demonstrate confidence, competence, and a strong sense of responsibility. • Responsible for processing heat treatment coupons on a regular basis, • Perform skilled inspections, work with exact tolerances, and inspect all castings and outside machined parts used in the production of company products, • Support the entire company distribution system with receiving inspection planning support including:, • Develop and maintain receiving inspection plans for all purchased finished components or services, • Provide hands-on training in the use of inspection gauging, plans, and reporting techniques as required, • Identify, justify, and purchase appropriate gauging to support inspection plans, • Execute the quality function for the non-conforming material review process for both purchased and internally assembled components, • Document inspection results and maintain quality department records, • Conduct functional tests on material as required, • Keep work area clean and orderly, • Other duties as assigned YOUR EXPERIENCES & SKILLS • Minimum four (4) years as an inspector for a manufacturing company or current Muncie Power Products employee who qualifies through testing, • Basic blueprint and geometric drawing and tolerance skills to interpret drawings, • Basic inspection skills with hand gauging instruments, • Basic machining knowledge of part fixtures and work holding, • Skill and knowledge of all types of inspection equipment, • Ability to utilize personal computers to run software programs, • Excellent verbal and written communication skills, • Ability to document problem-solving efforts, • Effectively able to present information in one-on-one and small-group situations, • Self-motivated with a strong desire to succeed BENEFITS • Medical, dental, and vision insurance, and zero card, • Life, death, dismemberment, and dependent insurances, • Prescription drug programs, • Telehealth, • Short-term and long-term disability, and flexible leaves of absence, • Employee assistance programs, • 401k (match 50% on the first 6% of deferred compensation) and flexible spending plans, • Three (3) weeks of paid time off, • Nine (9) paid holidays, • Wellness and Engagement LOCATION: Tulsa, OK DEPARTMENT: Quality WORK ENVIRONMENT: Manufacturing/Warehouse REPORTS TO: Corporate Quality Manager SHIFT TYPE: Monday–Friday (5-8s) WORKPLACE ARRANGEMENT: On-site SUPERVISES: No SALARY GRADE: 13 To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Safety Notice This position is considered a safety-sensitive position due to "the operation of a motor vehicle, other vehicles (forklift), equipment, machinery or power tools or the repairing, maintaining or monitoring the performance or operation of any equipment, machinery or manufacturing process, the malfunction or disruption of which could result in injury or property damage.” This description is intended to describe the general content of and requirements for the performance of this position. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Muncie Power Products is an Equal Opportunity Employer.

Job Description Quality Control Inspector – Tulsa, OK Great opportunity to join a growing energy and environmental company that is bringing its Quality team in-house. This is an onsite, hands-on QC role focused on ensuring fabricated equipment meets drawings, customer specifications, and applicable AWS/ASME standards. What you’ll do: • Perform dimensional and visual inspections throughout fabrication and production., • Inspect welds, blast/paint, insulation, liner plate installation, finished products, and final load-outs., • Read blueprints, weld symbols, and engineering drawings., • Document inspections with reports, photos, NCRs, ITPs, and quality records., • Work directly with vendors, production teams, customers, and project/document control teams to address quality issues and corrective actions., • Support audits, ISO procedures, root-cause analysis, and continuous improvement. What they’re looking for: • 5+ years of shop QC or third-party inspection experience preferred., • Strong experience in welding, steel fabrication, paint, and metal manufacturing., • Knowledge of SMAW, FCAW, GMAW, and GTAW welding processes., • Understanding of AWS/ASME codes and standards., • Strong blueprint/drawing interpretation and measurement skills., • CWI certification and ISO 9001 experience are preferred., • Must be comfortable working around welding, fabrication, and heavy equipment and lifting up to 50 lbs. Details: • Tulsa, OK | Onsite Monday–Friday, 8 AM–5 PM, • Approximately $90-100K + profit sharing, • Occasional travel/weekend work may be required, • Target start: September 2026, • Onsite interview; background check and drug screen required

Job Description Founded in 1984, Firetrol Protection Systems, Inc. is the national leader in fire protection & life safety services. We are currently seeking a Senior Fire Inspector Multi-Licensed to join our team of over 1,200 of the best fire protection professionals in the industry. This position is based in our Tulsa, OK location. • Perform comprehensive inspections and testing of fire alarm, sprinkler, and suppression systems, ensuring compliance with local, state, and national regulations., • Evaluate and document the condition of fire protection systems, providing detailed reports and recommendations for repairs and maintenance., • Supervise and mentor junior inspectors and assist in their training and development., • Interact with clients, contractors, and other stakeholders to effectively communicate findings and recommendations., • Maintain up-to-date knowledge of fire safety regulations, codes, and industry standards., • Some overtime, nights, weekends, and on-call hours may be required. Requirements • Minimum of 5 years of experience in fire protection or a related field, with a strong understanding of fire alarm, sprinkler, and suppression systems., • Current licenses as required by state regulations, including Fire Alarm and Sprinkler Inspector licenses., • Proven track record of providing high-quality inspections and committed to customer service., • Excellent communication skills, both verbal and written, with the ability to present findings clearly to diverse audiences., • Strong leadership skills with experience mentoring and guiding less experienced team members., • Valid driver’s license and the ability to pass background checks and drug screenings. Benefits Firetrol offers competitive wages and top-of-the-line benefits that include health, dental vision, life insurance, short and long term disability, generous paid time off practice and a 401(k) plan with a generous company match and immediate vesting. Additionally, sponsors training and education opportunities. Finally, Firetrol offers career growth opportunities, not just a job.

Job Description The general purpose of a Quality Inspector & CMM Operator is to perform first article, in-process, and final inspections that support manufacturing needs while ensuring products conform to all applicable engineering requirements and specifications. This position is also responsible for operating and maintaining the CMM. Major Work Functions and Desired Outcomes The major functions of Quality Inspector & CMM Operator include performing a variety of inspections including First Article, in-process, and final inspections using standard measuring equipment for determining product quality, and completing all required documentation upon completion. The inspector is responsible for making informed decisions when accepting or rejecting products based on applicable specifications and engineering requirements. Additional responsibilities include documenting inspection results according to policies and procedures including controlling the whereabouts and identification of nonconforming products discovered during the inspection process. The inspector & CMM Operator is responsible for documenting his/her time and on jobs inspected using JobBoss. The Inspector & CMM Operator is responsible for prioritizing his/her inspection workload to support the overall organization’s goals as well as reduce and identify potential risks of potential production stoppages. He/she will also work with manufacturing personnel to explain and resolve issues discovered to be nonconforming at the time of the inspection. The Inspector & CMM Operator will be responsible for operating, programming, and maintaining the Zeiss G2 CMM Machine with fluency in GD & T, Calypso, and CATIA annotation. Essential Functions/Required Skill Sets A Quality Inspector & CMM Operator must be able to fluently perform or have the following necessary skill sets: • Ability to read blueprints, • Proficiency in GD&T, • Calypso knowledge, • CATIA annotation, • Basic computer skills (i.e. Microsoft Word, Excel, etc.), • Use and read SME and perform all layout inspections as necessary, • Experience with AS 9100 quality management system, • Experience with an effective calibration system, • CMM operations experience and/or certification CMM operators must also be able to: • Ensure that precision machinery is in working condition and properly calibrated, • Determine program requirements based on design and engineering specifications, • Operate precision machinery as needed Required knowledge, skills, abilities and experience • High school diploma or equivalent is required, • Inspection experience and blueprint reading in a manufacturing environment may substitute for this education requirement, • Minimum of (2) years inspection experience and blueprint reading in a manufacturing environment, • Minimum of (2) years of CMM operation/programming experience (Zeiss G2 5 axis-preferred)., • Certified to operate/program CMM precision machinery is required, • Post-secondary education may substitute for experience requirements Physical and environmental requirements • Ability to lift up to 50 pounds without assistance in a standard manufacturing environment, • Ability to stand for extended periods wile performing inspections, • Ability to move throughout the manufacturing environment as required to complete inspections Compensation Compensation commensurate with experience. 1st Shift- M-F 6 am – 3:30 pm

Job Description This is a PART-TIME, hourly evening position. Shift Details: Flexible Part-Time hours between 5:30pm to 1:00am Sunday-Thursday Join our team at City Wide Facility Solutions of Tulsa as a Part-Time Bilingual Evening Janitorial Inspector! If you have an eye for detail and a passion for maintaining cleanliness, we want you to help us keep our clients' facilities spotless! As a Part-Time Janitorial Inspector, you will play a vital role in overseeing Independent Contractors, ensuring that all cleaning tasks are performed to the highest standards. You’ll enjoy the satisfaction of ensuring that our customers are happy with the cleanliness of their spaces. We believe in creating a positive work environment, where teamwork and support are at the forefront. This position will cover the Tulsa Metro area. Key Responsibilities: • Maintain regular nightly route schedule., • Work closely with Account Managers to review objectives and goals for nightly route., • Conduct building inspections to ensure compliance with cleaning standards., • Build and maintain relationships with new and current Independent Contractors., • Participate in all new starts as key contact for selected Independent Contractors. Requirements • Bilingual English/Spanish is required., • Must have a valid driver's license., • Must have reliable transportation to visit clients' buildings., • Prior experience in janitorial services or a supervisory role is a plus., • Strong communication and interpersonal skills., • Attention to detail and a commitment to quality., • Flexibility in scheduling, with a willingness to work evenings or weekends., • Positive attitude and a desire to work in a team-oriented environment. Safety Sensitive: • This position is Safety Sensitive., • If you are selected for this position, you will need to successfully complete a pre-employment drug screen and background check. Benefits Compensation: • Part-Time, • Hourly wage of $19/hour., • Mileage reimbursement up to $600/month. Schedule: • 20-30+ hours per week., • The assigned evenings to work are flexible; most of our Janitorial Inspectors work Sunday - Thursday evenings., • The assigned work hours are flexible, between 5:30 pm – 1:00 am. Many of our Janitorial Leads work from 6:00 pm - 12:00 am

Job Description Location North Tulsa Quality Inspector – Outside Process Shipping/Receiving Clerk Pay Rate and Hours: • Pay: Depending on Experience, • Days: Monday through Friday, • Hours: 1st shift, 7:00am – 3:30pmQuality Inspector – Outside Process Shipping/Receiving Clerk Summary: This role is a detail-oriented Outside Processing Quality Inspector to support the Quality Assurance Department in managing and maintaining quality standards for Outside Processing (OSP), Shipping, and Receiving operations. Requires strong knowledge of aerospace industry standards (such as AS9100, ISO 9001, and NADCAP), and experience inspecting incoming materials, final products, and outsourced processes to ensure compliance with specifications and regulatory requirements. This position will play a crucial role in the production process and contribute to the company’s overall performance in Quality, Cost, Delivery, Safety, and Attitude (QCDSA). We are a diverse team of collaborators, doers, and problem-solvers who are relentlessly committed to delivering excellence in aerospace manufacturing. Quality Inspector – Outside Process Shipping/Receiving Clerk Primary Responsibilities: Outside Processing (OSP) Quality Support: • Review and verify certifications from outside processing vendors (e.g., heat treatment, anodizing, passivation, NDT, coatings)., • Ensure all OSP vendors meet quality requirements, including NADCAP and customer-specific standards., • Work with procurement and engineering to resolve nonconformances or documentation issues., • Maintain tracking records and ensure timely turnaround of externally processed parts.Shipping & Receiving:, • Inspect incoming raw materials, components, and hardware for conformance to specifications, drawings, and purchase orders., • Verify shipping documentation (e.g., C of C, packing slips, inspection reports)., • Conduct final inspections of completed products prior to shipment, ensuring packaging, labeling, and documentation meet aerospace standards., • Coordinate with logistics and warehouse staff to maintain proper handling of aerospace parts and assemblies.Quality Documentation and Reporting:, • Maintain accurate inspection records and reports in accordance with AS9100/ISO standards., • Participate in root cause analysis and corrective actions for nonconforming material., • Assist in internal and external audits related to OSP, shipping, and receiving functions., • Support continuous improvement initiatives in the supply chain quality process.Quality Inspector – Outside Process Shipping/Receiving Clerk Primary Qualifications:, • High School diploma or GED required. Two (2) years of inspection experience or an equivalent combination of education and experience., • Demonstrated knowledge of AS9100, ISO9001 and NADCAP quality systems., • Ability to read and interpret aerospace engineering drawings, GD&T, and specifications., • Experience using both standard and metric measuring tools., • Demonstrated understanding of Heat Treat specifications and welding standards/requirements., • Ability to read and understand purchase orders and routers., • Experience with aerospace materials, tolerances, and specifications., • Experience handling both external and internal customers, building relationships and good customer service., • Experience driving trucks, both with manual and automatic transmissions., • Experience working with Purchase orders and routers., • Experience operating a forklift truck, pallet jack to move products around shipping and other departments as well as to load and unload trucks., • Experience utilizing ERP/MRP systems; knowledge of database software, MS Office (Excel, Word, and Outlook) and integration of technical data., • Adhere to OSHA, NADCAP, ISO9000 / AS9100, ITAR, FAA regulations and company specific safety standards., • Internal Certifications: Forklift, Slings/Cranes, or other approved processes., • Meet the requirements of annual Vision Exam., • Valid Oklahoma Driver’s license with minimal or no points on driving record., • Must be able to stand, walk, bend, and reach for extended periods (up to 8-12 hours per shift). Able to lift, carry, push, or pull up to 25-50lbs regularly, and occasionally heavier weights with assistance., • Must be able to tolerate exposure to manufacturing environments, including moderate noise levels, vibrations, and varying temperatures., • Ability to wear personal protective equipment as required, Such as safety glasses, gloves, and hearing protection. Safety sensitive position This is a temp to hire position. Key Personnel Benefits While on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more! Apply today! In order to make the best use of your time, only qualified applicants will be contacted. Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer. #INDLI26

Job Description Pay: $20–$26 per hour, depending on experience Shifts Available: 1st Shift, 2nd Shift, and Weekend Shifts Job Description: Lloyd Richards Personnel is hiring experienced CMM Operators and Quality Inspectors for precision manufacturing opportunities in the Tulsa area. We are looking for detail-oriented candidates with experience operating Coordinate Measuring Machines (CMM), inspecting machined components, interpreting engineering drawings, and maintaining strict quality standards. Opportunities include CMM inspection and advanced CMM programming responsibilities. Job Responsibilities: • Operate Coordinate Measuring Machines (CMM) to inspect precision-machined components., • Measure and inspect parts according to engineering blueprints, CAD models, and dimensional specifications., • Read and interpret blueprints and Geometric Dimensioning and Tolerancing (GD&T)., • Run CMM inspection programs and identify dimensional discrepancies., • Create, edit, or modify CMM programs for positions requiring programming experience., • Perform first article, in-process, and final inspections., • Use precision measuring equipment, including calipers, micrometers, height gauges, bore gauges, and dial indicators., • Review inspection reports and document measurement results., • Identify nonconforming parts and communicate quality concerns., • Assist with inspection procedures and continuous improvement efforts., • Maintain and verify measuring equipment for accuracy., • Follow all quality, production, and safety procedures. Requirements: • Previous experience operating CMM equipment in a manufacturing or machine shop environment., • Strong blueprint reading and dimensional inspection skills., • Working knowledge of GD&T., • Experience using precision measuring and inspection tools., • Familiarity with CMM software such as PC-DMIS, ZEISS Calypso, or similar systems., • Strong attention to detail and ability to identify quality issues., • Ability to follow technical instructions and maintain accurate inspection records., • Experience with CMM programming or program editing preferred; required for advanced programmer positions., • Aerospace manufacturing or precision machining experience preferred., • Advanced inspector/programmer opportunities may require 3+ years of recent aerospace machine shop experience, AS9102 inspection reporting knowledge, and the ability to work independently., • Dependable attendance and reliable transportation. What We Offer: • $20–$26 per hour, depending on experience., • 1st, 2nd, and weekend shift opportunities., • Weekly pay., • Precision manufacturing and aerospace-related opportunities., • Potential for long-term employment. Apply today to be considered for available CMM Operator and Quality Inspector positions in the Tulsa area.

Job Description Job Summary To perform all types of inspection which includes at least one (1) or more types of NDT (PT, MT, PMI, etc.) on raw or finished materials, parts, assemblies, and completed products to assure compliance with Ruhrpumpen and customer standards. Responsibilities and Duties • Receives, visually inspects, counts, and checks in all received items, process documents and records information on Ruhrpumpen forms., • Conducts and documents a variety of visual, dimensional, non-destructive, and monitoring inspections to verify conformance to defined requirements., • Use a variety of precision measuring and inspection tools to verify conformance of complex parts to engineered drawings, verifies information on operator inspection records to insure accuracy., • Performs visual inspections and makes dimensional checks including making required inspections and set-ups on complicated machined parts, machined parts assemblies and completed products. Performs first article inspection on the floor, and final inspections as required to assure that all items meet the required standard and conform to manufacturing specifications., • Documents non-conformances and dispositions acceptance or rejection where appropriate., • Conducts inspections at outside vendors, certifying to acceptability of machined parts and/or machine part assemblies., • Operates overhead crane and material moving equipment to move received items to designated areas., • Maintains work area in a clean orderly fashion., • Performs other duties as assigned., • Inspects and certifies that precision instruments meet acceptable standards. May perform some minor repair work on instruments. Also includes servicing of gauges and inspection tools and equipment; dismantling cleaning, setting and calibration as required., • Issues and maintains thread gauges, micrometers, dial bore gauges and other precision measuring instruments to insure they meet prescribed standards., • Follows appropriate handling and disposal of hazardous waste in compliance with EPA Regulations. Knowledge of applicable Material Safety Data Sheets (MSDS)., • For the protection of self and others, performs all work in accordance with established safety practices and facility safety rules., • Produces quality on time work and complies with ISO 9001 requirements. Qualifications and Skills • Completion of two to four years Trade or Technical School, or equivalent, requiring use of advanced shop mathematics together with the use of complicated drawings , specifications, charts, tables, handbook formulas, and a wide variety of precision measuring instruments., • 3 to 5 years of experience Physical Requirements: Prolonged standing, walking, bending, kneeling, twisting. Ability to lift up to 50lbs, good hand/eye coordination (eye test required) and ability to work in hot/cold environment. VEVRAA Federal Contractor/ EEO/AAP Powered by JazzHR 3H9iJptz9b

Job Description Apave America is looking for experienced API 510/570 Inspectors for nested positions for a client site located in the Tulsa, OK area. This is for full-time employment on the run & maintain crew. Must be able to work in pipe racks, elevated work areas, and from scaffolding, decks, etc. We offer competitive pay, comprehensive benefits, company matched 401k, and opportunities to build a rewarding career with Apave America Inc. Position Overview: The API 510/570/653 Inspector will conduct visual examinations of pressure retaining equipment such as tanks, piping, and vessels ensuring their mechanical integrity by performing visual inspections according to established API standards and codes (i.e. 510 for pressure vessels, 570 for piping, and 653 for storage tanks), to identify potential issues, maintaining documented reports of inspection findings, recommend necessary repairs, and certifying compliance with industry regulations. Conduct Inspections and Assessments • Inspect pipelines, pressure vessels, storage tanks, and other critical infrastructure for signs of wear, corrosion, cracks, leaks, or other damage., • Perform internal and external inspections based on industry standards like API 510 (pressure vessels), API 570 (piping), or API 653 (storage tanks)., • Ensure compliance with relevant codes and standards (e.g., API, ASME, ASTM, NFPA, and OSHA). Prepare Inspection Reports • Document findings from inspections, including any defects or non-conformities., • Provide detailed reports that include photographic evidence, measurements, and recommendations for corrective actions., • Maintain records for future reference and regulatory compliance. Risk Assessment and Analysis • Identify potential risks and hazards based on inspection findings., • Recommend corrective actions, including repairs, replacements, or modifications to maintain safety and integrity., • Assess the remaining life of equipment and suggest maintenance schedules to prevent failures. Non-Destructive Testing (NDT) • Supervise NDT methods (such as ultrasonic testing, radiographic testing, magnetic particle testing, or dye penetrant testing) to detect subsurface or surface defects., • Interpret NDT results and provide recommendations based on the findings. Regulatory Compliance and Safety • Ensure that inspections and assessments align with all relevant regulatory standards and safety protocols., • Assist with regulatory audits and maintain compliance with industry standards to minimize downtime and potential hazards., • Stay current with changes in regulations and industry practices. Collaboration and Communication • Work with engineers, maintenance teams, and management to develop inspection schedules and action plans., • Provide technical advice and guidance on repair and maintenance strategies., • Communicate with contractors and third-party vendors regarding inspection requirements and results. Monitoring and Continuous Improvement • Track and monitor equipment performance over time and report any changes or declines in condition., • Recommend or implement improvements in inspection processes, techniques, or technologies to enhance efficiency and safety. Certification and Training • Maintain necessary API certifications and participate in ongoing training to stay updated with the latest inspection standards, tools, and technologies., • Ensure that work is done in a manner that complies with both company procedures and industry best practices. Quality Assurance • Ensure that inspections are carried out according to established quality assurance standards and practices., • Verify that the equipment meets the required operational and safety standards before returning to service. Required Skills and Experience: • High School Diploma or equivalent is required., • Minimum of three (3) years' experience working with the 510, 570, and/or 653 certifications required., • Minimum of API 510 and 570 certifications are required., • Additional API 653 certification will be considered an asset., • Certifications in NDT methods (MT/PT/UTT) would be considered an asset., • Valid Driver’s License and pre-access drug and alcohol testing required., • Pre-employment background checks will be required. Physical and Mental Requirements: • Move, carry, and lift objects 50 lbs. or more., • Must be able to work in confined spaces and at heights, including climbing tanks, ladders, scaffolding, towers, piping systems, catwalks, structural steel, and wind turbines., • Must be able to walk, stand, bend, reach, and climb., • Must be able to work indoors and outdoors in all weather conditions., • Must be able to wear safety equipment as required by the safety department for personal protection, • Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively, • Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations, • Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine in-field or office job duties, • Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform in-field or office job duties, • Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders or stairwells, • Ability to maintain focus and multitask effectively Benefits: • Dental Insurance., • Vision Insurance., • Health Insurance., • Paid Time Off., • 401(K) W/Matching., • Flexible Spending Account., • Health Savings Account. NOTE: To be considered, applicants must be able to provide documentation of current or previous certifications, as well as all classroom and/or on-the-job training (OJT) hours required for certification. * Apave America Inc. is an equal opportunity employer that prohibits discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, and other protected characteristics. * We make hiring decisions based solely on qualifications, merit, and business needs. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees.

Job DescriptionDescription: Key Responsibilities: • Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping., • Expert Project Leadership: Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards., • Advanced Leak Detection: Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities., • Regulatory Compliance: Ensure all inspections meet or exceed industry regulations and standards., • Stakeholder Communication: Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence., • Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP.Requirements: Qualifications: • 5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection., • API 1169 Certification, • Proven expertise in overseeing large-scale projects, from start to finish. · Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. · Strong communication skills with the ability to work effectively in a team environment. · LocusView

Job DescriptionOur client is looking for a Quality inspector supporting Initial Phase Manufacturing, Composites, and Final Phase to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Qualifications: • High School Diploma or GED required., • 1 year quality inspection experience or 2 years GAC manufacturing experience required., • 2 years manufacturing experience or equivalent aerospace experience preferred., • Other Formal Inspection Training Program 90 Days required. Position Purpose In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Principle Duties and Responsibilities Essential Functions: • Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents., • Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD and verify paperwork. Witness, verify and document specified manufacturing process steps., • Perform conformity/first article inspections to ensure compliance with FAA approved procedures., • Ensure the proper use and storage of area tools and equipment., • Conduct work in a manner that enhances own/other employees health and safety, product safety and promotes risk reduction; participate openly in safety-related event investigations, and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: • Provide technical support to manufacturing personnel., • Perform area inspections to ensure compliance with applicable standards and specifications., • Participate in continuous improvement activities., • Perform other duties as assigned. Other Requirements: • Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation., • Competent in the use of basic shop tools and equipment. Must-Haves (Non-Negotiables): • High School Diploma or GED required., • Must be able to read, write, speak, and understand the English language., • 1 year quality inspection experience or 2 years GAC manufacturing experience required., • 2 years manufacturing experience or equivalent aerospace experience preferred., • Other Formal Inspection Training Program 90 Days required. Benefits: Bee Talent Solutions offers a competitive benefits package for eligible full-time employees, including medical, dental, and vision coverage. Additional details regarding eligibility and plan offerings will be provided during the interview and onboarding process. Pre-Employment Screening: As a condition of employment, all applicants must successfully complete a pre-employment drug screening.

Job DescriptionJob Description: Quality Inspector Department Quality Assurance Reports To: Quality Manager Employment Type: Full-Time Company Overview Ecoat.us Holdings is a leading provider of advanced electrocoating and industrial finishing services, committed to excellence in product quality, customer satisfaction, and continuous improvement. We serve diverse industries with a focus on high-performance coatings and value-added service. Position Summary We are seeking a detail-oriented Quality Inspector to join our team in Cleveland, TN. The successful candidate will support our quality assurance processes through hands-on inspection, adherence to ISO 9001 standards, and active participation in internal and external audits. The Quality Inspector will play a critical role in maintaining our commitment to quality and ensuring that all finished products meet customer and regulatory requirements. Key Responsibilities • Perform in-process and final inspections of coated and assembled parts for conformance to specifications., • Use various inspection tools and equipment including calipers, micrometers, and gauges., • Document inspection results accurately and maintain records in compliance with ISO 9001 standards., • Identify and report non-conformances, and assist in root cause analysis and corrective actions., • Participate in internal quality audits and support customer and third-party audits as needed., • Collaborate with production and quality teams to resolve quality issues., • Ensure compliance with safety procedures and environmental regulations.Qualifications, • High school diploma or GED required; technical training or associate degree preferred., • Minimum 2 years of experience in a manufacturing or industrial quality control environment., • Familiarity with ISO 9001 standards and quality system requirements., • Experience participating in internal and external audits., • Strong attention to detail and a proactive approach to problem-solving., • Ability to read and interpret technical drawings and specifications., • Proficient in the use of inspection tools and measurement equipment., • Basic computer skills, including Microsoft Office and experience with quality documentation systems.Preferred Qualifications, • ISO 9001 internal auditor certification., • Experience in the coatings or automotive industry., • Knowledge of SPC, control plans, and PPAP documentation.Working Conditions, • Manufacturing environment with exposure to noise, chemicals, and coatings., • Standing, walking, and lifting up to 40 lbs as required., • Day shift with occasional overtime or weekend hours depending on production needs.Why Join Us? ecoat.us Holdings offers competitive pay, health benefits, 401(k) with match, paid time off, and the opportunity to be part of a growing company dedicated to operational excellence and continuous improvement.

Job Description TAT Technologies (“TAT”) is a fast-growing, profitable provider of aerospace thermal management, power and actuation products, and repair services. Established in 1969, TAT serves as a global partner to leading aerospace companies, delivering innovative solutions across commercial, defense, OEM, and MRO markets. With employees and operations in the U.S. and Israel, TAT is recognized for its flexibility, technical expertise, and commitment to customer success. TAT Technologies' Tulsa site serves as the company's Center of Excellence for heat transfer manufacturing, MRO, and OEM solutions. Supporting commercial, regional, and military aircraft worldwide, the site delivers advanced thermal management solutions that enhance aircraft performance, improve reliability, and ensure operational and mission readiness. We are seeking a detail-oriented Quality & Dye Penetrant Inspector to support aerospace repair and overhaul operations. This position is responsible for performing dimensional, visual, and non-destructive inspections of aircraft components and assemblies to ensure compliance with customer, regulatory, OEM, FAA, and company quality standards. The successful candidate will conduct fluorescent penetrant inspections (FPI/Dye Penetrant), document inspection results, and support the release of quality products and services. Hours: 6:30am-3:00pm. Ability to work weekends and overtime. Responsibilities • Perform incoming, in-process, and final inspections of aircraft components, assemblies, and repairs., • Conduct fluorescent penetrant inspections (FPI) and dye penetrant inspections in accordance with approved procedures and industry standards., • Verify parts and assemblies conform to engineering drawings, specifications, work instructions, and customer requirements., • Interpret blueprints, technical drawings, inspection criteria, and maintenance manuals., • Utilize precision measuring instruments including calipers, micrometers, height gauges, bore gauges, and other inspection equipment., • Identify, document, and report non-conforming materials, components, and processes., • Complete inspection records, certifications, and quality documentation accurately and timely., • Ensure compliance with FAA regulations, OEM requirements, quality standards, and company procedures., • Support root cause investigations and corrective action activities as needed., • Maintain inspection equipment and ensure calibration requirements are met., • Participate in continuous improvement initiatives related to quality, safety, and operational excellence., • Follow all environmental, health, and safety requirements associated with inspection processes and chemicals. Requirements • High school diploma or GED., • 2+ years of quality inspection experience in aerospace, manufacturing, MRO, or FAA Part 145 repair station., • Experience performing dye penetrant or fluorescent penetrant inspections., • NAS 410, ASNT, or equivalent NDT certification in Penetrant Testing (PT) preferred., • Ability to read and interpret engineering drawings, specifications, and technical documentation., • Knowledge of ISO 9001, AS9100, or related quality systems., • Experience with ERP and quality management systems., • Knowledge of inspection techniques and quality control practices., • Proficiency using precision measuring and testing equipment., • Strong attention to detail and documentation skills., • Ability to work independently and as part of a team., • Ability to lift 50 pounds., • Ability to work weekends and overtime. Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location. Equal Employment Opportunities (EEO) – TAT Technologies is committed to maintaining a supportive, healthy, and productive work environment free from discrimination, harassment, or bullying, and complying with all legislative requirements. This includes equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty, or status as a covered veteran.

Job Description NOW HIRING: Quality Control Inspector – Welded Products | Manufacturing Environment Competitive Pay: $20-$27 | 2nd Shift We are seeking a detail-oriented Quality Control Inspector to support inspection of welded products in a fast-paced manufacturing/job shop environment. Position Overview This hands-on role involves performing in-process and final inspections of welded components to ensure quality, workmanship, and compliance with drawings and specifications. This position works closely with fabrication teams on the production floor to maintain quality standards and identify issues before final release. Key Responsibilities • Inspect welded parts and assemblies for quality, fit-up, and conformance to specifications, • Perform in-process and final inspections in a manufacturing environment, • Identify weld defects or quality concerns and communicate findings to production teams, • Use calipers, tape measures, weld gauges, and other inspection tools, • Read and interpret blueprints, drawings, and manufacturing instructions Qualifications • Previous quality control inspection experience with welded products, • Knowledge of visual weld inspection standards and acceptance criteria, • Ability to read and interpret blueprints and technical drawings, • Comfortable working in a physical industrial/shop environment, • CWI certification or related welding inspection experience preferred

Job Description Welding Quality Inspector – Fabrication Pay: $22–$32 per hour depending on experience This position is responsible for inspecting welded components and verifying that welds meet fabrication drawings and quality standards. Applicants without welding inspection or quality control experience will not be considered. Requirements • Experience inspecting welded components in a fabrication or manufacturing environment, • Ability to read fabrication drawings and welding symbols, • Ability to verify weld quality and identify defects, • Experience using measuring tools and inspection equipment, • Reliable transportation to work Responsibilities • Inspect welded components to ensure they meet quality standards, • Review fabrication drawings and welding specifications, • Identify weld defects or quality issues, • Document inspection results and communicate with fabrication teams, • Ensure welding work meets required specifications Work Environment This position operates in a fabrication or manufacturing environment inspecting welded components and production work. Preferred Experience • Experience performing welding inspections in fabrication shops, • Experience reading welding symbols and fabrication drawings, • Experience performing quality control inspections on metal components Important Note We partner with multiple companies across the Tulsa area. Pay, shift, schedule, and location vary by assignment and experience. During your interview, a recruiter will match you with the openings that best fit your skills and preferences.

Job Description C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Natural Gas Distribution Inspector Level 1-4Location: Tulsa, OKLevel 1 Key Responsibilities- Perform inspections on pipelines to assess their structural integrity, safety, and compliance with industry regulations. Prepare detailed inspection reports outlining findings, recommendations, and necessary repairs. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications: Minimum of 1 year of experience in pipeline inspection or a related field. Strong understanding of pipeline construction, maintenance, and repair processes. Level 2 Key Responsibilities- Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Conduct inspections of pipelines, focusing on line extensions and rebuild services. Qualifications: Minimum of 2-4 years of experience in pipeline inspection, with a focus on line extensions and rebuild services. Knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects. Level 3 Key Responsibilities- Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Qualifications: 5-6 years of experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 Level 4 Key Responsibilities- Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company’s service area. Work shall be performed in accordance with Company standards and 49 CFR 192 Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications: Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on transmission projects. CPWI API 1169 C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary The Quality Control Inspector is responsible for ensuring that incoming materials, in-process production, and finished products meet established quality standards and regulatory requirements. This is a hands-on role that works closely with production teams to identify, document, and resolve quality issues while supporting continuous improvement initiatives. Key Responsibilities • Perform inspections on incoming materials, in-process assemblies, and finished products to verify compliance with quality standards and engineering requirements., • Document inspection results accurately and maintain complete quality records., • Process and manage quality documentation, including process tags, rework tags, and nonconforming material reports., • Collaborate with production, engineering, and quality teams to investigate quality issues and support corrective and preventive actions., • Conduct routine audits of manufacturing processes to ensure adherence to quality control procedures and work instructions., • Utilize standard mechanical and electrical inspection equipment, functional gauges, test rigs, and measurement instruments., • Ensure compliance with the Quality Management System (QMS) and applicable standards, including AS9100 and AS9120., • Review and interpret Material Test Reports, Inspection Data Results, and Certificates of Conformance/Performance., • Perform regular floor presence and inspections; this role is not limited to desk work. Qualifications • High school diploma or equivalent; additional education or certification in quality control or a related field is preferred., • Minimum of 2 years of experience as a Quality Control Inspector or in a similar role within a manufacturing environment., • Ability to read and interpret engineering drawings, specifications, and tolerance requirements., • Working knowledge of inspection tools and equipment, including calipers, micrometers, and weight scales., • Proficiency with Microsoft Office tools, including Excel and Teams, for daily documentation and communication., • Knowledge of Geometric Dimensioning and Tolerancing (GD&T) is strongly preferred but not required., • Strong attention to detail, problem-solving skills, and the ability to work independently or as part of a team.Company DescriptionWe offer weekly pay & immediate benefits.We offer weekly pay & immediate benefits.

Company Description\n \n \nJohn Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. \n \n \nWe have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. \n \n \nJohn Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. \n \n Job Description\n \n \nPrepares, positions, aligns, and joins metal structural shapes with MIG, TIG and Spray Arc welding procedures and achieved ASME Section IX, complete x-ray certified welds.\n \n\n • Examines drawing, inventories components to ensure that all required materials are available, and that they conform to the drawing and documentation.\n, • Identifies and resolves any problem with drawings with the Welding Lead/Supervisor.\n, • Requisitions welding materials through the Welding Lead/Supervisor.\n, • Records the material MTR's (Material Test Records) on the drawing and manufactures accordingly.\n, • Performs the actual fit-up of materials and welding per identified weld procedures. Supervisor may approve fit-up by annotating initials and date on drawing.\n, • When welding operation is complete, grinds or chips rough edges, surplus weld, or scale. Cleans up assembly with wire buffer or sander as required.\n, • Performs visual inspection prior to inspection by Welding Lead/Supervisor or Authorized Inspector.\n, • Follow requirements for weld inspection hold points.\n, • Accurately record labor times and maintain acceptable productivity per the company established standard.\n, • Complete x-ray quality welds.\n, • Perform other duties as required.\n\n \n Qualifications\n \n\n • High School Graduate or GED and two years related experience and/or training; or equivalent combination of education and experience.\n, • Ability to work flexible hours including weekends as needed to meet business demands.\n, • Ability to complete tasks in a timely and efficient manner\n, • Capable of handling multiple priorities simultaneously in a high-stress environment.\n, • Ability to read and comprehend simple instructions, short correspondence, and memos.\n, • Ability to write simple correspondence.\n, • Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization.\n, • Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's.\n, • Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations.\n, • ASME Section IX\n, • X-ray Quality Welds\n, • Must be able to perform data entry for extended periods throughout the day\n, • Must be able to frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds\n\n \n Additional Information\n \n \nWith colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERG's) to provide a safe space for employees to connect and support each other. Our cross-business ERG's include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. \n \n \nAcross our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. \n \n \nJoin us for a great career with competitive compensation and benefits, while helping engineer a better future. \n \n \n#ZR\n \n \nWe believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity.\n \n \nAt no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job Description About Us Grubbs Automotive is a family-first, relationship-driven dealership dedicated to our employees, customers, and community. We offer a supportive team environment with ongoing training, skills development, and career growth opportunities — so you can build a rewarding career in automotive service and sales while making a real impact every day. Why Join Grubbs: • Competitive pay based on experience & certifications, • Paid Time Off (PTO)., • Medical, Dental, Vision Insurance., • Life/AD&D Insurance., • Short & Long-Term Disability Insurance., • Pet Insurance., • 401(k) with Company Match. Grubbs Acura Tulsa is seeking an Express Technician. Overall, the ideal candidate should be motivated, detail-oriented, and committed to providing excellent customer service while possessing the necessary technical skills and certifications for automotive maintenance and repair. Responsibilities: • Receiving and carrying out Repair Orders., • Performing entry-level maintenance tasks such as oil changes, tire rotations, filter replacements, etc., • Conducting diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing video multi-point inspections on vehicles., • Performing Quality Control checks for repaired vehicles., • Completing all required paperwork and documentation for repair services., • Maintaining an organized, clean workspace and accounting for tools., • Communicating effectively with Service Advisors and Parts Department Employees., • Participating in ongoing training programs to develop expertise in automotive technologies. Qualifications: • High school diploma or GED preferred., • At least one year of relevant experience preferred., • Knowledge of automotive servicing or repair desired., • Unrestricted driver's license and clean driving record required., • Ability to drive both automatic and standard-transmission vehicles., • Neat, clean, and professional appearance., • Excellent communication, customer service, and problem-solving skills., • Interpersonal skills to interact professionally with customers, vendors, and staff., • Professionalism and dependability., • Safety and customer service orientation., • Basic computer and internet skills., • Physical ability to bend, kneel, squat, stand, and lift heavy objects., • Certification as a state inspector is a plus. Grubbs maintains a strong policy of Equal Employment Opportunity for all associates. We hire, train, promote, and compensate associates based on personal and professional competence and potential for advancement without regard for race, color, religion, sex, national origin, age, marital status, disability, or citizenship, as well as other classifications protected by applicable federal, state, or local laws. #zr \nCompany Description At Grubbs Family of Dealerships, we are more than just a network of car dealerships – we are a trusted partner in the automotive journey. With a legacy spanning four generations and boasting fourteen dealerships in five strategic locations, we take pride in our widespread presence, ensuring convenience and accessibility for our valued clients. Our commitment to exceptional customer service and top-quality vehicles has made us a beacon of reliability and excellence in the automotive industry. Founded on the principles of integrity, transparency, and a genuine passion for automobiles, our family-owned dealerships have become synonymous with trustworthiness. At Grubbs Family of Dealerships, we don’t just sell cars; we create lasting relationships built on trust. Experience the Grubbs difference and join our team today. The Grubbs Family has been in the automobile business since 1948. Still family owned and now managed by the fourth generation, The Grubbs Family of Dealerships represents many different brands at multiple locations across Texas and Oklahoma. At Grubbs Family of Dealerships, we are more than just a network of car dealerships – we are a trusted partner in the automotive journey. With a legacy spanning four generations and boasting fourteen dealerships in five strategic locations, we take pride in our widespread presence, ensuring convenience and accessibility for our valued clients. Our commitment to exceptional customer service and top-quality vehicles has made us a beacon of reliability and excellence in the automotive industry. Founded on the principles of integrity, transparency, and a genuine passion for automobiles, our family-owned dealerships have become synonymous with trustworthiness. \r\n\r\nAt Grubbs Family of Dealerships, we don’t just sell cars; we create lasting relationships built on trust. Experience the Grubbs difference and join our team today.\r\n\r\nThe Grubbs Family has been in the automobile business since 1948. Still family owned and now managed by the fourth generation, The Grubbs Family of Dealerships represents many different brands at multiple locations across Texas and Oklahoma.

Job Description Central State Community Services Oklahoma, Inc. Job Description Job Title: Human Resource Director Department: Executive Reports To: Chief Operating Officer FLSA Status: Exempt Safety Sensitive: Non-Safety Sensitive Revision Date: April 2024; May2026 SUMMARY Responsible for all corporate personnel activities, coordinates activities of Human Resources department staff, and oversees the Human Resources department by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include but are not limited to the following. Other duties may be assigned. Regular, predictable and reliable attendance and punctuality. The primary duty of the position is managing and directing operations and personnel in the Human Resources Department. Customarily, this involves directly supervising the work of 2 or more full-time employees and assisting outlying offices with supervision of Office Support Professionals. Formally recognize the accomplishments of others when they display character traits valued by the organization. Assist with development of and oversee a character recognition program carried out by human resources department staff. Interview, hire and train all Human Resources Department staff. Oversee and spot check the work of HR Department staff. Make recommendations for employment promotions, transfers or separations of said positions. Recognize exceptional performance, conduct performance correction and evaluate performance for HR Department staff. Report irregularities in HR procedures to the Chief Operating Officer. Monitor overall operation of all HR office systems. Coordinate and oversee the development of job aids for all HR positions. Maintain cross-training of all HR positions to ensure seamless, continuous service. Receive, review and audit timesheets for the HR Department staff. As a back-up & on an as needed basis, review and analyze checks written. Utilize a signature stamp to stamp all checks. Prepare for and participate in annual Quality Assurance, financial, workers’ compensation, 401K and other audits. Coordinate & oversee investigations and complaints related to bullying and harassment. Recommend personnel action, as needed, to the Chief Operating Officer. Coordinate & oversee investigations regarding workplace violence. Recommend personnel action, as needed, to the Chief Operating Officer. Monitor and evaluate employee work related illnesses/injuries and treatment. Keep in contact with ill/injured worker and workers’ compensation insurance company. Maintain OSHA logs in compliance with regulations. Monitor safety incentive program for the corporation and revise as needed. Track and monitor trends in workplace injuries. Maintain Safety Manual. Monitor Drug & Alcohol Free Workplace program. Oversee random, for cause & post-accident drug/alcohol testing & assure compliance with policy. Act as liaison to Employee Assistance Program. Monitor health, dental, life and supplemental insurance programs. Coordinate annual open enrollment. Complete annual reports that include [but is not be limited to] OSHA, EEOC, Notice of Creditable Coverage. Assist in routine audits of all personnel files. Assure orderly and confidential system of personnel file maintenance. Maintain and file items into administrative staff personnel files. Participate in communications sent to employees. Answer telephone calls and provide and coordinate front desk coverage when needed. Use company vehicle or personal vehicle to travel to outlying offices and program sites on a quarterly basis, or more often as needed. Modify and maintain Employee Handbook, Performance Evaluations, Performance Guidelines, Position Descriptions, Job Descriptions and interview forms. Attend, present at and actively participate in Management & Leadership and other meetings. Act as back-up trainer when necessary. Provide training as needed or requested for administrative and field staff. Coordinate annual DSP Appreciation Week activities. Oversee performance evaluation process. Send out reminders for 6 month, 1 year, and annual evaluations. Review all completed evaluations. Follow up with any issues or concerns raised. Request revisions if needed. SUPERVISORY RESPONSIBILITIES Directly supervises employees in the Human Resources Department. Carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and correcting employees; addressing complaints and resolving problems. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Work environment can be fast paced. The ability to deal with stress and get along with co-workers and supervisors is essential. Must be able to communicate effectively with people outside the company and internally within all levels of management and all departments. Must be detail oriented, ability to multi-task, and be professional, confidential and friendly. Must have written skills in order to document. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. An individual must have consistent and reliable transportation that allows for routine travel for a variety of job related activities. These activities could include but are not limited to attending CSCSO and contracting agency meetings, attending training classes, and/or providing assistance to CSCSO personnel in offices outside the normal geographic office assignment. SAFETY SENSITIVE When using company vehicle or personal vehicle during the completion of job duties, this position becomes safety sensitive. Safety Sensitive means any job that includes tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others including, but not limited to, any of the following: • the operation of a motor vehicle, other vehicle, equipment, machinery or power tools,, • dispensing pharmaceuticals,, • direct support or care to an adult or child. EDUCATION and/or EXPERIENCE Completion of a four-year degree in human resources &/or related field from an accredited college/university is required. Minimum of 4 year of management experience in human resources management is required. Familiarity with not for profits and government contracts is desirable. CERTIFICATES, LICENSES, REGISTRATIONS A valid Oklahoma driver’s license is required as well as current insurance as required by the State of Oklahoma. HR certification [SHRM, SCP, CP, SPHR, PHR, etc.] is a plus. OTHER QUALIFICATIONS A felony/misdemeanor background search with OSBI and the Community Services Worker Registry is performed. Additional screenings that may be conducted include, but are not limited to, a Department of Motor Vehicles (DMV) record check, the National and State Sex Offender registry, the Violent Offender registry, the Nurse Aid Registry Search (NARS), the Office of Inspector General (OIG), the System for Award Management (SAM), and the Restricted Registry. Results can affect employment status. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit. The employee is frequently required to see, talk and hear. The employee is occasionally required to stand, walk and use hands to handle, or feel. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Employee Signature Date

Job Description Pay: $22.75 Title: CMM Quality Inspector Location: North Tulsa Pay Rate and Hours: $22.75 Monday- Friday Job Description: Works with assistance and direction to use predetermined methods, operations, setups and prescribed specifications to perform in-process and completed inspections of products such as machine parts, mechanical assemblies, purchased standard hardware, and the inspections of applied protective coatings including verification of thermal process (heat treat and eddy current inspections). Uses various measuring devices to perform required inspections and accepts or rejects malfunctioning or non-conforming units or systems. Works from blueprints, digital models, diagrams or other customer specifications, and uses inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures. Observe and implement lean manufacturing and continuous improvement methods in all job assignments Support Quality Inspectors 3-4 as directed Good knowledge of common inspection measuring equipment including, but not limited to, surface plates, micrometers, height gauges, radius gauges, protractors, profilometers, bore gauges, dial indicators, and Coordinate Measuring Machines/Scanners Basic PC skills, including Microsoft Office (Word, Excel) Ability to use Syteline/ESI or other ERP systems after instruction Blueprint reading and basic math skills Good manual dexterity Ability to professionally communicate and work cooperatively with others Skills: Must have the knowledge, skill, and ability to meet expectations for required competencies in position, which includes Safety, health, and environmental awareness Business ethics and compliance Technical/professional competence and quality & time management Interpersonal relations and communication skills Initiative, flexibility, innovation, and adaptability Continuous improvement and problem solving Planning and organizing. Ability to prioritize and complete multiple tasks and high volume of work on deadline. Ability to interact professionally with customers, suppliers, and fellow team members. Be willing to research, evaluate and train new process methods. Proficient in Microsoft Office (Word, Excel, Outlook, and Power Point); as this position does require working knowledge or intermediate use of technology—to include computers, and other devices. Well-developed verbal and written communication, collaboration, and time management skills. Demonstrates prioritization and planning skills. High School Diploma or equivalent 3+ years with recent aircraft machine shop experience Key Personnel Benefits While on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more! Apply today! In order to make the best use of your time, only qualified applicants will be contacted. Our office is located at 9717 E. 42nd St (Tech Ridge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer. #INDLI26

Job DescriptionDescription: Quality Control Inspector Reports to: Quality Manager Classification: Non-Exempt Safety Sensitive: Yes The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers’ quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS • Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications., • Verify part to print accuracy for Shipping & Receiving., • Complete First Article Inspections and paperwork., • Read and understand complex blueprints., • Verify stock to engineering revision changes., • Utilize measurement tools such as calipers to assess product dimensions and tolerances., • Maintain quality systems in accordance with AS9102 standards., • Reports on and speak to quality metrics for management review., • Collaborate with cross-functional teams to identify areas for improvement in processes and product quality., • Provide training and guidance on quality standards to production staff., • Document non-conformances and assist in the development of corrective action plans., • Additional duties as needed or assigned by management., • Adhere to safety protocols while handling materials and operating equipment., • Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area., • Perform other duties as needed or assigned by leadership. Requirements: REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. • Ability to use all measuring tools, read and decipher detailed measurements on blueprints., • Ability to read GD&T prints and perform manual measurements frequently to complex specifications., • Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection., • CMM knowledge strongly preferred., • Strong analytical skills with the ability to interpret data effectively., • Experience conducting quality audits and implementing quality management systems., • Proficiency in using measurement tools such as calipers and gauges., • Excellent attention to detail., • Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary., • Strong communication skills, both verbal and written., • Basic computer skills, familiarity with MS products is a plus, • Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment., • High level of dependability regarding attendance and punctuality., • Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: • Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull., • Ability to perform pushing, pulling, forward exertion on a regular basis., • Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed., • Ability to have overhead extension with arms on a regular basis, • Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally., • Ability to stand and walk continuously on concrete floor for 10-hour shifts, • Ability stand, crouch, stoop, bend, kneel and squat frequently., • Ability to climb ladders frequently., • Ability to work from elevated surface such as a ladder frequently., • Ability to bend and twist at the hip and waist area on a regular basis, • Ability to rotate neck to look backwards, up, down and sideways on a regular basis, • Ability to regularly lift and or move 45-55 lbs., • Ability to understand and communicate verbally, in person and over paging system, • Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines.

Job Description Summary/Objective: The Construction Inspector assists and acts as a liaison between contractors, engineers, and clients and will include the inspection and observation of roadway, bridge, and utility projects. This position will work under the supervision of the Field Operations Manager and Resident Engineer Project Engineer. This position will assist, as needed, with field inspections, documentation, and contract administration to ensure that the project is built in accordance with project plans and specifications. Applicants must be capable of physical activity in an outdoor setting including but not limited to light lifting, bending, stooping and climbing, walking and standing for prolonged periods of time, and regularly operating motorized vehicles. All applicants must consent to a background check and motor vehicle report as a requirement of employment. Essential Functions: ● Conducts routine visual inspections and specified tests on raw materials, in-process goods, and finished products to ensure quality standards are met. ● Performs material sampling and testing as required. ● Prepares and maintains project documentation, including quantity calculations. ● Provides support for residency audits and ensures compliance with requirements. ● Enters data and updates records in SiteManager/AASHTOWARE Project. ● Tracks contractor time and activities for accurate project management. ● Verifies utility locations and collaborates with team members and client companies to ensure accurate site information. ● Tests, inspects, and approves materials in accordance with established quality specifications. ● Identifies defects in materials and installation processes through observation and testing. ● Compares inspection and test results to specifications, reporting findings to supervisors for analysis and further action. ● Interacts with staff, contractors, and the public in professional manner. ● Maintains comprehensive quality records and documentation as needed. ● Travel is required and expected, applicants must be willing to accept long-term and short-term out of town projects. Competencies: ● High school diploma or equivalent. ● Thorough understanding of ODOT and OTA specifications. ● Thorough attention to detail. ● Excellent verbal and written communication skills. ● Proficient in Microsoft Office Suite or related software as needed to complete reports. ● OHCMT Materials Sampling and Testing Certification. ● Familiar with grading, drainage, and utility projects. ● Sitemanager application experience. Work Environment: The Inspector will frequently operate in outdoor settings and must be prepared for a range of weather conditions, from extreme heat to cold. Work locations will vary from highly traveled urban roads to more remote undeveloped areas. Physical Demands: The physical demands described here are representative of those that must be met by an employee to perform the essential functions of this job successfully. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; and reach with hands and arms. Employee will need good vision to see their surroundings; glasses are acceptable. This position requires the ability to lift weight occasionally. The employee may need to walk through rough terrains. Position Type/Expected Hours of Work : This position requires flexibility in work hours, with the expectation to be present whenever contractors are on-site. The role includes on-call and as-needed availability. Work hours will vary depending on the specific project, weather, and any project delays. Required Education and Experience: • At least one year of related experience is required., • OHCMT Materials Sampling and Testing Certification.

Job DescriptionCompany Description We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results – for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. Job Description Olsson provides construction management, administration, and observation services for both public and private projects to ensure work is performed in conformance with project documents. Our construction services include daily observation/inspection, project documentation, submittal review, design support, shop drawing review, and oversight of materials testing. We provide technically qualified personnel for our clients' specific project requirements. As a Civil Bridge Inspector, you will play a key role in the inspection and evaluation of bridge and structural construction projects. Your primary responsibilities will include performing and coordinating inspections of bridges and related structures, interpreting project plans and specifications, ensuring construction activities comply with applicable standards, and documenting construction progress in accordance with project and regulatory requirements. You will work closely with construction managers, engineers, contractors, and clients to ensure projects are completed safely, efficiently, and in compliance with design intent. This role requires a strong understanding of structural components, materials, and construction practices specific to bridges. You will travel to various job sites at different stages of construction and work in a variety of terrain and weather conditions. This position includes: • The use of a company truck for transportation to and from job sites., • Applicable PPE (personal protective equipment) provided., • Work boot reimbursement program., • Company-issued laptop., • Cell phone reimbursement options., • Opportunities for continued training, mentorship, and professional development. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Using your talents to positively affect communities. You bring to the team: • Strong communication and documentation skills., • Ability to work both independently and as part of a team., • Bachelor's degree in civil engineering, construction management, or a related field (or equivalent experience)., • A minimum of five (5) years of experience in bridge inspection, structural inspection, or construction inspection related to transportation structures., • Knowledge of ODOT/OTA standards, NBIS requirements, and bridge inspection procedures preferred., • Experience with bridge components such as decks, substructures, superstructures, and rehabilitation work., • Certification(s) such as OSHA 10/30, NBIS (or ability to obtain) preferred., • The ability to work in a constant state of alertness and in a safe manner., • Valid driver's license with a clean driving history., • Ability to lift and carry 50lbs., • Willingness to work a flexible schedule, including occasional extended hours based on project needs. #LI-DNP Additional Information Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: • Receive a competitive 401(k) match, • Be empowered to build your career with tailored development paths, • Have the possibility for flexible work arrangements, • Engage in work that has a positive impact on communities, • Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Crusoe is seeking a Manufacturing Quality Manager to oversee Manufacturing Quality across multiple AI data center infrastructure production sites. Reporting directly to the Director of Quality, this role leads team management, quality assurance, process controls, electrical/mechanical product quality, QMS execution, regulatory compliance, testing, and continuous improvement across our facilities. Crusoe Quality Org Leadership Philosophy: The ideal candidate does not view Manufacturing Quality as simply an inspection organization. We are looking for a leader who can build a culture where Quality is designed into the product → engineered into the manufacturing process → verified through robust testing → controlled through Statistical Process Controls (SPC) → measured through data → continuously improved with QMS discipline. The successful candidate will demonstrate equal proficiency in conducting shop-floor oversight, evaluating electrical testing procedures, reviewing weld integrity with Certified Welding Inspectors, and collaborating with Engineering on Corrective and Preventive Action (CAPA) initiatives. Furthermore, this leader must maintain rigorous audit readiness across UL compliance, QMS, ISO, and safety standards, perform thorough quality data analytics, and effectively communicate manufacturing and quality risks to executive leadership. This strategic role demands deep expertise in electromechanical assembly, production processes, and QMS. Operating across Manufacturing, QMS, Engineering, and Regulatory Compliance, the Manager will build and guide high-performing Quality teams to foster a rigorous Quality mindset across all Crusoe sites. This position requires approximately 30% to 40% travel among manufacturing facilities, vendor sites, and client locations. What You'll Be Working On: Multi-Site Manufacturing Quality Leadership: Direct quality operations across multiple Crusoe facilities. Define inspection standards and acceptance criteria, lead multi-site containment efforts with urgency, establish staffing requirements, partner with production leadership, coach quality staff, and build scalable quality systems to support rapid growth while owning QMS compliance and discipline. Mechanical Quality Assurance: Provide technical oversight for mechanical fabrication, structural assemblies, sheet metal, welding/welded structures, CWI requirements, dimensional inspection, GD&T, surface coatings/paints, fastening/torque control, and enclosure assembly quality. Electrical Quality Assurance: Direct technical oversight for switchgear, switchboards, breakers, electrical cabinets, busbars, industrial control equipment, wiring/harnessing, electrical safety testing, insulation/dielectric testing, hi-pot testing, continuity/grounding, and electrical IPQC. Product Requirements Compliance & Traceability: Lead QA activities to ensure full compliance with UL 891, UL 508, NRTL, NETA ATS-2025, customer, regulatory, and product certification standards across electrical equipment, assemblies, and infrastructure. Factory Acceptance Testing (FAT) & Factory Witness Testing (FWT): Lead Quality oversight for factory testing and customer/certification witness activities, including pre-FAT readiness reviews, test procedure approvals, calibration verification, test result traceability, defect resolution, and witness inspections. Ensure manufacturing sites are fully prepared prior to customer/certification execution. Product Change Management: Ensure all modifications to product designs and Bills of Materials (BOM) are formally communicated to Quality Assurance teams, systematically updating corresponding inspection protocols and acceptance criteria. Manufacturing Process Quality & Quality Engineering: Partner with Manufacturing and Engineering to implement robust process controls (PFMEA, Control Plans, Process Flow Diagrams, SPC, MSA/Gage R&R, Poka-Yoke, standardized work, FAI, layered audits) to drive first-pass yield, reduce scrap/rework, and minimize process variation. QMS Compliance & Audit Readiness: Oversee manufacturing quality problem-solving initiatives across teams. Maintain constant audit readiness for internal, customer, ISO 9001:2026, and certification audits. Oversee corrective actions from audit findings, manage quality records, and serve as the liaison between Manufacturing Quality and the enterprise QMS organization. Structured Problem Solving & CAPA: Lead and coach personnel through core quality and risk management methodologies, including CAPA, NCR, RCA, 8D, SCAR, containment, deviation management, and effectiveness verification to eliminate repeat issues. Quality Assurance Data Management: Establish cross-site quality metrics and dashboards tracking First Pass Yield, Defect PPM, NCR/Rework/Scrap rates, escapes, COPQ, FAT/FWT performance, and audit findings to pinpoint systemic trends and execute targeted operational improvements. Cross-Functional Collaboration (Engineering & Supply Chain): Partner with Design, Manufacturing Engineering, and NPI teams on DFM/Quality reviews, CTQ identification, GD&T, change control, and converting compliance rules into factory controls. Collaborate with Supplier Quality and Procurement on supplier qualification, subcontractor quality, incoming requirements, and risk escalation. People Leadership & Team Development: Build and direct high-performing multi-site Quality teams. Align staffing plans with manufacturing volume, define competencies and career paths, enable cross-training between mechanical and electrical teams, cultivate technical SMEs, and foster an organizational culture centered on accountability and continuous improvement. What You'll Bring to the Team: Professional Experience: 15+ years of progressive experience in Manufacturing Quality, Quality Engineering, Quality Assurance, Electrical Quality, Mechanical Quality, or related disciplines, including significant experience leading Quality organizations in complex manufacturing environments. Multi-Site Leadership Track Record: Demonstrated people-management experience leading cross-functional Quality teams across multiple manufacturing facilities. Dual-Domain Expertise (Electrical & Mechanical): Proven experience supporting both electrical hardware (switchboards, switchgear, breakers, industrial controls) and mechanical hardware (sheet metal fabrication, structural welding, enclosures, coatings). Testing & Inspection Mastery: Strong experience with FAT, FWT, electrical testing (hi-pot, dielectric, continuity), and end-to-end manufacturing inspection (IQC, IPQC, OQC). Regulatory & Compliance Knowledge: Strong working knowledge of UL compliance and certification requirements, with experience working with external auditors, certification bodies, customers, and regulatory organizations. Welding Process Oversight: Working knowledge of welding inspection and CWI-controlled process management. Root Cause & RCA Methodologies: Demonstrated mastery of CAPA, RCA, SCAR, 8D, NCR, and structured problem-solving methodologies. Quality Management Systems: Deep knowledge of QMS principles, ISO auditing, quality data management, and manufacturing quality controls. Cross-Functional Influence: Proven track record of influencing and collaborating across Engineering, Manufacturing, Supply Chain, Procurement, and Executive leadership. Travel Flexibility: Ability and willingness to travel 30% to 40% across manufacturing facilities, vendor locations, and client sites. Safety and Compliance: Position is designated a safety-sensitive position located in safety-sensitive facilities. Mandatory participation in company safety, background check, drug, and alcohol programs is required. Bonus Points: Education: Bachelor's degree in Electrical Engineering, Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Quality Engineering, or related technical discipline; Master's degree preferred. Professional Certifications: ASQ Certified Quality Engineer (CQE), Certified Quality Auditor (CQA), or Certified Quality Manager (CQM). Process Excellence: Lean Six Sigma Black Belt or Master Black Belt certification. Welding Credentials: AWS Certified Welding Inspector (CWI) designation or formal NDE training. Standards & Certifications Expertise: Specific exposure to UL 891, UL 508, NRTL certification programs, or NETA ATS specifications. Data & Software Systems: Experience with enterprise QMS software platforms, QMS/ERP/MES integrations, and advanced quality data analytics. Industry Experience: Experience scaling quality organizations within mission-critical infrastructure, data centers, power distribution, switchgear, or industrial controls industries. Benefits: Competitive compensation and equity packages Restricted Stock Units Paid time off, paid holidays & leave of absence programs Comprehensive health, dental & vision insurance Employer contributions to HSA account Paid parental leave Paid life insurance, short-term and long-term disability Professional development & tuition reimbursement Mental health & wellness support Commuter benefits (parking & transit) Cell phone stipend 401(k) Retirement plan with company match up to 4% of salary Volunteer time off Global travel insurance & emergency assistance Daily meals allowance Additional perks & programs specific to location Compensation: Compensation will be paid in the range of $140,000 - $160,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicant’s education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. (#INDMFG) Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities: Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications: 5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 Certification Proven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Location: South Tulsa Quality Inspector Pay Rate and Hours: • $20-$30 depending on your experience, • Monday–Thursday, 6:00am –2:30pm open to overtime Quality Inspector Job Description: Under minimal supervision completes test and inspections of machined parts, sub/final assemblies and/or customer owned parts for conformance with assembly, engineering, process specifications or instructions. Performs calibration of gages and precision measurement tools used in operations and maintains online documentation files Quality Inspector Skills:, • Works under minimal supervision., • Performs inspection of machined parts, sub and final assemblies for conformance with assembly, engineering or other process specifications or instructions., • inspects parts and/or materials in the receiving, shipping or repairs areas to assure their conformance to engineering specifications, including materials specifications, drawings, and customer requested and engineering approve modifications., • Receives, stores and issues a variety of inspection instruments., • Calibrate and verify accuracy on precision measurement, thread gages, and test equipment., • May maintain the calibration system to ensure product is measured by qualified equipment and gages., • Inspects frames using visual or other NDT methods to prepare written quotes, • Maintain update and file appropriate Engineering and Quality documents in the QMS online document storage system., • Prepare and maintain inspection reports, nonconformance reports, quality control logs, identification tags, and labels to established procedures., • May inspect all employees owned tools, determine if calibration is required and calibrate as required., • Where applicable use CMM, • Where applicable, perform applicable NDT test, • Performs all work in accordance with established safety and quality management procedures., • Regular attendance and compliance with all Company policies and rules is an essential function for the job. Overtime, including potential for nights and/or weekend shifts may be required., • Perform all other duties as assignedQuality Inspector Required Skills/Abilities:, • 2 to 3 years’ experience in a quality function supporting heavy industrial parts fabrication and product manufacturing., • Ability to learn and use CMM and NDT processes., • Good knowledge of precision measurement and test equipment., • Read blueprints and perform shop math, • Knowledge of ISO Quality System requirements, • Prolonged periods of standing and bending required., • Must be able to lift 35 pounds at a time. Key Personnel Benefits While on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more! Apply today! In order to make the best use of your time, only qualified applicants will be contacted. Our office is located at 9717 E. 42nd St (Tech Ridge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer. #INDLI26

Job Description CWI / Structural Inspector Location: Tulsa, OK Job Type: Full-Time Compensation: $30/hr - $38/hr, plus overtime and bonuses Reports To: Lead Structural Inspector AIMRIGHT Testing and Engineering is seeking an experienced Structural Inspector to perform complex special inspections, AWS Certified Welding Inspector (CWI) inspections, non-destructive testing (NDT), and related field quality assurance activities on structural steel and other assigned scopes. This role supports active construction projects through sound technical judgment, timely reporting, and responsive communication with contractors, project managers, engineers, and clients. Why This Role Exists: The Structural Inspector helps protect quality, code compliance, and project progress by providing dependable field inspections, accurate documentation, and responsive support on active job sites. This role is expected to represent AIMRIGHT professionally while helping clients, engineers, and contractors address issues quickly and keep projects moving. What You’ll Do: Primary Responsibilities Inspections (Special Inspections, CWI Inspections) · Lead complex structural and welding inspections, providing technical judgment on challenging field conditions. · Perform ICC Special Inspections, including structural masonry, structural welding, structural steel, prestressed concrete, and reinforced concrete as assigned. · Perform AWS Certified Welding Inspector (CWI) inspections in accordance with applicable project requirements and code standards. · Review plans, specifications, and project documents to confirm scope, sequencing, and inspection requirements. · Troubleshoot inspection issues and communicate effectively with contractors, project managers, engineers, and clients. Project Coordination & Reporting · Track re-inspection needs and help close open items with the project management team. · Coordinate with site superintendents and foremen to align inspection timing with construction activities. · Prepare accurate, timely, and professional field inspection reports. · Improve consistency through templates, checklists, and best-practice documentation. Safety & Training · Partner with leadership on safety reinforcement and process improvements. · Train and mentor Structural Inspector I-III team members in field methods, reporting standards, and jobsite professionalism. · Ensure compliance with OSHA regulations and company health and safety plans. · Promote a culture of safety awareness on all job sites, including safe work at heights and in changing field conditions. What We’re Looking For: Required Qualifications · Minimum of 3 years of structural or special inspection experience; 5+ years preferred. · Strong written documentation skills and client/jobsite communication abilities. · Valid driver's license with a clean driving record. ·

Job Description Inspect Excellence. Elevate Safety. Help Build the Future of Aerospace. Location: Tulsa, OK | Pay Rate: $32.19/hour | Schedule: Full-Time, 1st Shift (5am - 3:30pm) Are you passionate about precision, quality, and aviation excellence? PDS Tech Commercial is seeking a detail-oriented QC Inspector to join a world-class aerospace manufacturing team. In this critical role, you'll help ensure that aircraft components, assemblies, and systems meet the highest standards of safety, quality, and regulatory compliance before they take flight. If you thrive in a fast-paced manufacturing environment and take pride in delivering flawless work, this is your opportunity to make a lasting impact on the aerospace industry. Your Impact As a QC Inspector, you will play a vital role in maintaining product integrity and supporting the production of safe, reliable aircraft. Your expertise will help ensure that every component, assembly, and process meets engineering specifications, FAA requirements, and company quality standards. By identifying issues early, verifying compliance, and supporting continuous improvement efforts, you'll contribute directly to the success of aircraft manufacturing operations and the safety of those who depend on them. What You'll Do Quality Inspection & Compliance Perform inspections using engineering drawings, route cards, inspection travelers, work instructions, technical specifications, and quality procedures. Conduct preliminary, progressive, and final inspections of aircraft structures, systems, sub-assemblies, and major assemblies. Verify functional operation of systems and components. Inspect for Foreign Object Debris (FOD) and ensure proper documentation is completed. Witness, verify, and document critical manufacturing process steps. Perform conformity and first article inspections to ensure compliance with FAA-approved procedures and design requirements. Review and validate production paperwork for completeness and accuracy. Manufacturing & Technical Support Provide technical guidance and quality support to manufacturing personnel. Conduct area audits and inspections to ensure compliance with standards and specifications. Ensure proper use, maintenance, and storage of tools and equipment. Participate in continuous improvement initiatives focused on quality, efficiency, and operational excellence. Safety & Risk Management Promote a culture of safety and accountability. Identify workplace hazards and recommend corrective actions. Participate in safety investigations and risk reduction activities. Support product safety initiatives and compliance programs. Required Qualifications High School Diploma or GED. Minimum of 1 year of quality inspection experience or 2 years of manufacturing experience. Ability to complete a Formal Inspection Training Program within 90 days of hire. Working knowledge of blueprint reading and interpretation, engineering drawings, and technical documentation. Basic understanding of shop mathematics. Competency with standard shop tools and manufacturing equipment. Ability to read, write, speak, and understand English. Strong attention to detail and commitment to quality standards. Preferred Qualifications 2+ years of manufacturing experience. Aerospace manufacturing or inspection experience. Familiarity with CATIA or similar engineering software. Experience performing first article, conformity, or FAA-regulated inspections. Knowledge of aircraft structures, systems, composites, or assembly processes. Experience working within AS9100, FAA, or other aerospace quality environments. Ready to Take Your Career to New Heights? If you're a quality-focused professional with a passion for aerospace manufacturing and a commitment to excellence, we want to hear from you. Apply today and join PDS Tech Commercial in helping build the future of flight—one inspection at a time. Pay Details: $32.19 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. \nCompany Description Every year, PDS Tech Commercial and PDS Defense place thousands of skilled trades and engineering associates into roles all across the nation. Since our founding in 1977, we have maintained the highest standard of service and satisfaction among both talent and clients. Today, we continue to deliver exceptional services as a proud member of The Adecco Group (TAG) family, a leading global workforce solutions provider. What does this mean for you? We are united by a powerful mission: making the future work for everyone. We offer our local experience paired with global resources, bringing significant advantages to all our areas of expertise. From end-to-end digital recruitment to priority redeployment and beyond, we are committed to building a better world of work for all. Every year, PDS Tech Commercial and PDS Defense place thousands of skilled trades and engineering associates into roles all across the nation. Since our founding in 1977, we have maintained the highest standard of service and satisfaction among both talent and clients.\r\n\r\nToday, we continue to deliver exceptional services as a proud member of The Adecco Group (TAG) family, a leading global workforce solutions provider. What does this mean for you? We are united by a powerful mission: making the future work for everyone. We offer our local experience paired with global resources, bringing significant advantages to all our areas of expertise. From end-to-end digital recruitment to priority redeployment and beyond, we are committed to building a better world of work for all.

Job DescriptionOverview Company Overview: Advance Your Career in Insurance Claims with Allied Universal® Compliance and Investigation Services. Allied Universal® Compliance and Investigation Services is the premier destination for a career in insurance claim investigation. As a global leader, we provide dynamic opportunities for claim investigators, SIU investigators, and surveillance investigators. Our team is committed to innovation and excellence, making a significant impact in the insurance industry. If you’re ready to grow with the best, explore a career with us and make a difference. Job Description JOB DESCRIPTION: Allied Universal Compliance and Investigations is seeking candidates to fill the role of the Field Site Inspector. The Field Site Inspector will perform site visit inspection services for Medicare and Medicaid providers/suppliers in accordance with established requirements. The Inspector works independently to visit assigned locations, take photographs, conduct interviews, collect data, and document findings. Inspections must be completed using approved guidelines and standards. • Multiple positions are available!, • Must possess a valid driver's license with at least one year of driving experience, • Pay Rate: $25 / hr RESPONSIBILITIES: • Conduct independent investigations of assigned cases in a specific geographic area., • Document and report observations, activities, and any relevant information in a clear and concise manner using mobile devices (tablets and cell phones), • Maintain confidentiality and adhere to legal and ethical standards with the highest professional standards while conducting site inspections, • Efficient and timely workload management to meet assignment time completion., • Review and verify credentials, including education, training, licensure, and certification, for healthcare providers and healthcare facilities as required., • Ensure that healthcare providers meet all necessary qualifications and requirements as detailed on provider/supplier-specific site visit checklist forms., • Collaborate with Desktop Inspectors and other PEO SVS operational staff for the execution and reporting of site visit inspection performance., • Professional attire, demeanor, and Interaction during all contacts with provider/suppliers/facility administrative staff/representative throughout the entire site inspection process. QUALIFICATIONS (MUST HAVE): • High school diploma or equivalent, • Proficient in utilizing laptop computers, mobile devices, and tablets., • Flexibility to work varied and irregular hours/days including weekends, • Successful completion of the Allied Universal Investigations’ training/orientation course, • Successful completion of all required Site Inspector training, internal and CMS-required, both initial and in-service training. PREFERRED QUALIFICATIONS (NICE TO HAVE): • Associate degree or higher, preferably in Criminal Justice, • Prior insurance investigations and/or healthcare facility on-site inspections/compliance., • Knowledge of Regulations: Familiarity with industry regulations, such as those from the National Committee for Quality Assurance (NCQA) and The Joint Commission (TJC), Medicare Provider Enrollment, or other healthcare profession or facility credentialing, is highly preferred., • Effective public speaking and communication skills. BENEFITS: • Medical, dental, vision, basic life, AD&D, retirement plan and disability insurance, • Seven paid holidays annually, sick days available where required by law, • Vacation time offered at an initial accrual rate of 3.08 hours biweekly. Unused vacation is only paid out where required by law. Closing Allied Universal® is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race/ethnicity, age, color, religion, sex, sexual orientation, gender identity, national origin, genetic information, disability, protected veteran status or relationship/association with a protected veteran, or any other basis or characteristic protected by law. For more information: www.aus.com If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: www.aus.com/offices. Requisition ID 2026-1739160

Job Description Thermal Engineering International (USA) Inc. (TEi), proudly part of Babcock Power Inc., stands at the forefront of cutting-edge heat-transfer technology, catering to a diverse range of industries. With a seamless integration of design, engineering, manufacturing, installation, and service, TEi offers complete, expertly crafted solutions backed by decades of experience. Headquartered in La Palma, CA, TEi also operates offices in Tulsa, OK; Houston, TX; and Trevose, PA, alongside a state-of-the-art manufacturing facility in Joplin, MO. TEi is in search of a motivated, dynamic, and visionary leader to manage the company’s Quality function working at our office in Tulsa, OK or preferably at our Joplin, MO location. The Director of Quality will be accountable for ensuring that all company operations adhere to the Quality Control Manual, customer specifications, regulatory requirements, and all relevant standards. This position will oversee the development, implementation, and ongoing enhancement of the company's quality systems and processes. Additionally, the Director of Quality will be responsible for leading the upkeep and advancement of TEi’s certifications—including, but not limited to, ISO 9001:2015, ASME Section III, and ASME Section VIII—through the establishment and management of the necessary processes and procedures to maintain compliance with these standards. This role is highly visible and strategic, collaborating closely with TEi’s executive leadership team, including the COO, CFO, and CEO, to promote and ensure quality excellence throughout the organization. Key Responsibilities · Provide strategic leadership for the Company’s Quality function, ensuring alignment with organizational objectives and strict adherence to regulatory requirements. · Develop and monitor quality performance metrics, dashboards, and key performance indicators (KPIs) to facilitate data-driven decision-making. · Collaborate closely with Engineering, Manufacturing, Supply Chain, and Project Management teams to ensure clear understanding and fulfillment of quality requirements throughout the product lifecycle. · Support manufacturing operations by ensuring compliance with appropriate inspection, testing, and documentation procedures. · Act as the primary liaison for quality-related matters with customers, regulatory authorities, and certification bodies. · Prepare and present updates on quality performance, risk assessments, and strategic recommendations to the executive leadership team. · Review project proposals, cost estimates, and project quality plans. · Participate in Business Process Improvement (BPI) Corporate Quality initiatives as required. Requirements · A Bachelor’s degree in Engineering (Mechanical, Chemical, Nuclear, or a related field) is mandatory. · A Master’s degree in Engineering, Quality Management, or Business Administration is highly desirable. · A minimum of 10 years of progressively responsible experience in Quality Assurance and Quality Control within manufacturing, engineering, or heavy industrial sectors is required. · 5+ years of leadership or management experience, overseeing quality teams, programs, or cross-functional initiatives, is essential. · 5+ years of experience within the Power Industry is required. · Proven expertise in working with ISO 9001:2015, ASME Section III, ASME Section VIII, or other regulated quality systems is expected. · Demonstrated success in the development, implementation, and maintenance of Quality Management Systems is necessary. · Experience in leading internal and external audits, including customer, regulatory, and certification audits, is required. · A strong proficiency in root-cause analysis, corrective and preventive actions (CAPA), and continuous improvement methodologies is essential. · Experience in managing supplier quality programs, vendor qualification, and performance monitoring is necessary. · Experience with manufacturing processes, fabrication, and welding of pressure-boundary equipment is required. · Possession of ISO 9001:2015, ASME Section III, and/or ASME Section VIII Lead Auditor certification, or an equivalent auditing credential, is highly desirable. · Certifications in Non-Destructive Testing, including Visual Testing, Ultrasonic Testing, Radiographic Testing, Magnetic Particle Testing, Eddy Current Testing, Dye Penetrant Testing, Acoustic Emission Testing, or Leak Testing, are considered advantageous. · Welding inspection certifications such as Certified Welding Inspector, OSHA Safety Certification, or Certified Welding Engineer are preferred. · Certifications in Lean Six Sigma, including Master Black Belt, Black Belt, Green Belt, or Yellow Belt, are regarded as beneficial. · Proficient in the use of Microsoft Office Suite, including Excel, Word, PowerPoint, and Outlook. · Demonstrated advanced skills in Excel for data analysis, reporting, and key performance indicator (KPI) tracking, utilizing features such as pivot tables, charts, and formulas. · Experienced with ERP/MRP systems, such as SAP, Oracle, Infor, or equivalent platforms, particularly for quality-related workflows. · Knowledgeable in document control systems and electronic records management practices. · Capable of interpreting and managing digital engineering drawings using software such as AutoCAD or comparable viewers. · Skilled in employing software tools for nonconformance management, corrective actions, and root-cause analysis. To provide greater transparency to candidates, we include base pay ranges for all US-based job postings that encompass all potential locations and levels for the open positions. Our base pay ranges are set based on the function, discipline, level and regional location and are benchmarked against companies in the same or similar industry. Final offers may vary based on multiple factors including education, depth and relevance of work experience, relevant licenses and certifications, and may vary from the amounts listed in the job posting. Compensation: 175,000 - 200,00 annually DOE Benefits Click link to view a summary of our benefits. https://benefits.planyear.com/Z1ESv1fu/SalaryFTRecruiting

ProAmpac is a leading global flexible packaging company with comprehensive product offerings. Providing creative packaging solutions, industry-leading customer service and award-winning innovation to a diverse global marketplace. We are guided in our work by four core values that are the basis for our success: Integrity, Intensity, Innovation and Involvement. We bring brand owners and packaging experts together to generate fresh thinking, accelerate advanced technology and increase speed-to-market, package customization and consumer differentiation. Our expertise is rooted in shared core values grown from the heritage of our small businesses and strategic acquisitions. Collectively, we are stronger and more responsive, with a broader geographic footprint. Together, we are ProAmpac, the trusted leader in global change in the packaging industry. To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made, upon request, to enable individuals with disabilities to perform the essential functions. A packing inspector’s duties include, but are not limited to the following: • Examine the bags prior to packaging, to ensure quality standards are maintained at all times., • Observe equipment operations so that malfunctions can be detected and notify operators of any malfunctions., • Lift raw materials, finished products, and packed items, manually or using hoists., • Make sure that the correct number of bags are in each case., • Make sure that ALL products on their machines are labeled correctly., • Load and unload items from machines, conveyors, and conveyances., • Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, and cleaning work areas and equipment., • Clean and lubricate equipment as instructed by a machine operator or supervisor. May also be required to go get supplies for normal operation and/or general maintenance such as rags, lubricants, tape, stretch film, cleaning solutions, etc..., • Follow the instruction of the machine operator., • Emptying waste carts, strapping bales of waste when the baler is full., • Assisting the machine operator with print set-ups, machine size changes, normal operation and maintenance. This includes going to get ink and plates for prints, changing tapers and adhesive pads for the machine, changing print rollers, cleaning ink trays and getting boxes ready for product packaging., • Responsible for making sure that the bottom-paste pot has paste in it during operation., • Responsible for reporting any problems seen during production including... bag construction, adhesives, print quality, loud or unusual noises from the machine and defective boxes or other materials., • Remove trash and debris from the production area during their shift to maintain a safe working environment., • Make sure that each case of finished product is being printed with a time/date code., • Packing Inspectors will work on any and all machines’ lines as needed or instructed by a supervisor or adjuster., • May be required to transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks., • Signal coworkers to direct them to move products during the production process., • After weighing production waste, the weigh ticket must immediately return to the machine operator to ensure accurate recording of waste. Behaviors Preferred • Dedicated: Devoted to a task or purpose with loyalty or integrity, • Team Player: Works well as a member of a group, • Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Motivations Preferred • Ability to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization, • Self-Starter: Inspired to perform without outside help Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description Looking to grow your career in heavy equipment repair and certified welding? Tulsa Trailer is seeking a motivated Trailer Technician / Fabricator & Welder to execute structural repairs, custom metal fabrication, brake overhauls, and general maintenance in our Tulsa shop facility. Key Responsibilities • Perform structural trailer repairs including door replacement, floor patches, roof repair, body panel work, and lift gate servicing., • Execute high-level fabrication and welding on aluminum, carbon steel, and 308 stainless steel using MIG, TIG, and FCAW processes., • Assist certified code welders on ASME R-Stamp pressure vessel repairs and USDOT Hazardous Materials (HM) cargo tank work., • Service wheel ends, friction/air disc brakes, air lines, and trailer wiring/lighting circuits., • Utilize mobile tablets to manage job workflow and track completed maintenance tasks. Qualifications & Skills • 1+ year of hands-on commercial trailer repair, metal fabrication, or MIG/TIG welding experience., • High mechanical aptitude and comfort operating pneumatic tools, plasma cutters, and shop equipment safely., • Familiarity with MIG, TIG, or FCAW welding on aluminum and steel alloys., • Strong work ethic, reliable attendance, and commitment to maintaining shop safety standards., • Eager to advance technical skills through company-paid ongoing education and certifications. Perks & Benefits • On-the-job paid training to earn ASME R-Stamp welding and USDOT inspector certifications., • Competitive hourly wage with performance growth reviews., • Comprehensive healthcare benefits, retirement options, and PTO., • Consistent Monday–Friday shop schedule with steady year-round work.\nCompany Description Tulsa Trailer is a premier, full-service commercial trailer and heavy fleet repair facility located in Tulsa, OK. We specialize in comprehensive fleet maintenance, mobile roadside repairs, USDOT cargo tank inspections, and high-level fabrication—including ASME R-Stamp certified pressure vessel welding across aluminum, carbon, and stainless steel. At Tulsa Trailer, we invest heavily in our team by providing modern digital shop tools, industry-leading benefits, and company-paid continuing education to help our technicians earn advanced certifications and advance their careers. We foster a workplace built on mutual respect, steady work, and genuine room for personal and professional growth. Tulsa Trailer is a premier, full-service commercial trailer and heavy fleet repair facility located in Tulsa, OK. We specialize in comprehensive fleet maintenance, mobile roadside repairs, USDOT cargo tank inspections, and high-level fabrication—including ASME R-Stamp certified pressure vessel welding across aluminum, carbon, and stainless steel.\r\n\r\nAt Tulsa Trailer, we invest heavily in our team by providing modern digital shop tools, industry-leading benefits, and company-paid continuing education to help our technicians earn advanced certifications and advance their careers. We foster a workplace built on mutual respect, steady work, and genuine room for personal and professional growth.

Company Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Prepares, positions, aligns, and joins metal structural shapes with MIG, TIG and Spray Arc welding procedures and achieved ASME Section IX, complete x-ray certified welds. • Examines drawing, inventories components to ensure that all required materials are available, and that they conform to the drawing and documentation., • Identifies and resolves any problem with drawings with the Welding Lead/Supervisor., • Requisitions welding materials through the Welding Lead/Supervisor., • Records the material MTR's (Material Test Records) on the drawing and manufactures accordingly., • Performs the actual fit-up of materials and welding per identified weld procedures. Supervisor may approve fit-up by annotating initials and date on drawing., • When welding operation is complete, grinds or chips rough edges, surplus weld, or scale. Cleans up assembly with wire buffer or sander as required., • Performs visual inspection prior to inspection by Welding Lead/Supervisor or Authorized Inspector., • Follow requirements for weld inspection hold points., • Accurately record labor times and maintain acceptable productivity per the company established standard., • Complete x-ray quality welds., • Perform other duties as required. Qualifications • High School Graduate or GED and two years related experience and/or training; or equivalent combination of education and experience., • Ability to work flexible hours including weekends as needed to meet business demands., • Ability to complete tasks in a timely and efficient manner, • Capable of handling multiple priorities simultaneously in a high-stress environment., • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence., • Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization., • Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's., • Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • ASME Section IX, • X-ray Quality Welds, • Must be able to perform data entry for extended periods throughout the day, • Must be able to frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERG's) to provide a safe space for employees to connect and support each other. Our cross-business ERG's include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. #ZR We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Company Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Prepares, positions, aligns, and joins metal structural shapes with MIG, TIG and Spray Arc welding procedures and achieved ASME Section IX, complete x-ray certified welds. • Examines drawing, inventories components to ensure that all required materials are available, and that they conform to the drawing and documentation., • Identifies and resolves any problem with drawings with the Welding Lead/Supervisor., • Requisitions welding materials through the Welding Lead/Supervisor., • Records the material MTR's (Material Test Records) on the drawing and manufactures accordingly., • Performs the actual fit-up of materials and welding per identified weld procedures. Supervisor may approve fit-up by annotating initials and date on drawing., • When welding operation is complete, grinds or chips rough edges, surplus weld, or scale. Cleans up assembly with wire buffer or sander as required., • Performs visual inspection prior to inspection by Welding Lead/Supervisor or Authorized Inspector., • Follow requirements for weld inspection hold points., • Accurately record labor times and maintain acceptable productivity per the company established standard., • Complete x-ray quality welds., • Perform other duties as required. Qualifications • High School Graduate or GED and two years related experience and/or training; or equivalent combination of education and experience., • Ability to work flexible hours including weekends as needed to meet business demands., • Ability to complete tasks in a timely and efficient manner, • Capable of handling multiple priorities simultaneously in a high-stress environment., • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence., • Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization., • Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's., • Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • ASME Section IX, • X-ray Quality Welds, • Must be able to perform data entry for extended periods throughout the day, • Must be able to frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERG's) to provide a safe space for employees to connect and support each other. Our cross-business ERG's include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. #ZR We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job DescriptionCompany Description John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Prepares, positions, aligns, and joins metal structural shapes with MIG, TIG and Spray Arc welding procedures and achieved ASME Section IX, complete x-ray certified welds. • Examines drawing, inventories components to ensure that all required materials are available, and that they conform to the drawing and documentation., • Identifies and resolves any problem with drawings with the Welding Lead/Supervisor., • Requisitions welding materials through the Welding Lead/Supervisor., • Records the material MTR's (Material Test Records) on the drawing and manufactures accordingly., • Performs the actual fit‑up of materials and welding per identified weld procedures. Supervisor may approve fit‑up by annotating initials and date on drawing., • When welding operation is complete, grinds or chips rough edges, surplus weld, or scale. Cleans up assembly with wire buffer or sander as required., • Performs visual inspection prior to inspection by Welding Lead/Supervisor or Authorized Inspector., • Follow requirements for weld inspection hold points., • Accurately record labor times and maintain acceptable productivity per the company established standard., • Complete x-ray quality welds., • Perform other duties as required.Qualifications, • High School Graduate or GED and two years related experience and/or training; or equivalent combination of education and experience., • Ability to work flexible hours including weekends as needed to meet business demands., • Ability to complete tasks in a timely and efficient manner, • Capable of handling multiple priorities simultaneously in a high-stress environment., • Ability to read and comprehend simple instructions, short correspondence, and memos., • Ability to write simple correspondence., • Ability to effectively present information in one on one and small group situations to customers, clients, and other employees of the organization., • Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's., • Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations., • ASME Section IX, • X-ray Quality Welds, • Must be able to perform data entry for extended periods throughout the day, • Must be able to frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERG's) to provide a safe space for employees to connect and support each other. Our cross-business ERG's include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future. #ZR We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Take 5 Oil Change is your neighborhood go-to oil change spot. We've been doing this for over 35 years now and we pride ourselves in our friendly technicians, our oil change expertise, and our efficient process that gets you on your way safely and swiftly. All while letting you stay in the comfort of your car or truck while we change your oil. We're always looking for friendly and energetic team members to join our family. Technicians, managers, and more positions are available across the country. With our Pit Tech to President growth path, Take 5 is where you can invest in yourself while we invest in you. In fact, over 90% of our field leaders are internal promotions! At Take 5 Oil Change, leadership happens right on the shop floor. We're looking for an Assistant Shop Manager who is career-minded, enjoys working with people, takes pride in doing things the right way, and is ready to help lead a fast-paced team. In this role, you'll support the Shop Manager with daily operations, team development, and fast, friendly customer experience. You'll step in as Manager on Duty when needed, helping the team stay focused while keeping the shop safe, efficient, and running smoothly. We provide paid, hands-on training to teach the technical skills and service standards needed to succeed the Take 5 way. Automotive experience is valued, but not required! The Nuts and Bolts of the Role: • Complete our Certified Technician training., • Serve as Manager on Duty when needed by coordinating workflow and helping the team deliver safe, efficient, high-quality service., • Model fast, friendly customer service, respond to customer needs, and resolve concerns professionally., • Ensure services are completed accurately and consistently while reinforcing company procedures, safety requirements, and service standards., • Support shop performance by identifying opportunities for improvement and taking on additional leadership responsibilities when the Shop Manager is unavailable., • Train new team members, provide real-time coaching and feedback, reinforce expectations, and recognize strong performance., • Perform all Certified Technician and Lead Technician responsibilities., • Complete opening and closing procedures., • Assist with daily inventory counts and adjustments., • Support shop communication, reporting, and operational follow-up. What We're Looking For: • Minimum 6 months' customer service experience in a fast-paced service environment delivering consistent and exceptional customer service experience for every customer., • Minimum 6 months' experience leading, coaching, or mentoring others in a fast-paced environment., • A commitment to following and maintaining facility and safety control policies and practices., • Strong communication skills and comfort providing direction, coaching, and feedback to team members., • Initiative, accountability, and follow-through on responsibilities., • The ability to remain calm, organized, and solutions-focused during busy periods., • The ability to meet applicable age and certification requirements, including Inspector Certification when required., • Reliable transportation to and from your work location. What's Great About Take 5: • Competitive hourly pay plus weekly bonus opportunities., • Competitive benefits, including medical, vision, dental, and 401(k) with company match for full-time employees., • Paid time off for full-time employees., • Paid training and clear career growth paths., • Opportunities to grow from shop roles into leadership positions through strong performance and consistency. Work Environment and Physical Requirements: • Lift up to fifty (50) pounds., • Maneuver safely in and out of a shallow 3-foot-deep pit to position yourself under vehicles., • Walk, stand, bend, stoop, twist, hold, grasp, pull, and turn for extended periods of time., • Work in hot or cold weather conditions when necessary. We are an Equal Opportunity Employer and we are committed to assuring equal opportunity and to opposing discrimination based on race, color, sex, gender, gender identity, gender expression, sexual orientation, age, religion, national origin, ancestry, disability, military and veteran's status, genetic information, marital status, or any other status protected by federal, state, or local law.

Olsson Construction Administration PositionOlsson provides construction management, administration, and observation services for aviation projects to assure that work is performed in conformance with project documents.This work will be in support of our airport clients and be focused on mostly work

Position Overview The Sales Development Representative is responsible for overseeing the full lifecycle of the property inspection process, from recruiting and managing a nationwide network of independent inspectors to coordinating inspections and ensuring the timely delivery of inspection materials to our appraisal team. This position serves as the primary liaison between inspectors, clients, appraisers, and internal staff to ensure inspections are completed accurately, efficiently, and on schedule. Success in this role requires exceptional organizational skills, strong relationship management abilities, and the capacity to coordinate multiple projects simultaneously in a fast-paced environment. Key Responsibilities Inspector Network Development • Recruit, qualify, and expand a nationwide network of independent property inspectors to support current and future markets., • Source prospective inspectors through the ASC National Registry, industry databases, professional associations, and other recruiting channels., • Conduct proactive outreach via phone, email, text, and LinkedIn, • Communicate the benefits of partnering with our firm, including a consistent pipeline of assignments, administrative support, compensation commensurate with what they currently earn, and referral opportunities for residential appraisal work., • Maintain an active pipeline of prospective inspectors to support business growth. Inspection Coordination • Assign inspections to the most qualified inspector based on geographic proximity, experience, and availability., • Coordinate inspection scheduling with inspectors, property contacts, and clients, leveraging automated CRM processes to improve efficiency and communication., • Manage all inspection logistics, including access instructions, special requirements, scheduling changes, and client communications., • Resolve any day-of issues that arise with clients, sales people, inspectors, or even appraisers. Inspection Operations & Quality Assurance • Ensure the prompt and accurate transfer of inspection deliverables—including photographs, measurements, field notes, and supporting documentation—to the assigned appraiser., • Process inspector payments accurately and in a timely manner., • Maintain detailed records of inspections, inspector activity, and communications within the company's CRM and operational systems., • Collaborate with leadership to improve inspection processes, recruitment strategies, and operational efficiency., • Monitor key performance metrics and contribute to departmental goals related to inspection turnaround times, inspector network growth, and service quality. This position is well suited for a highly organized, relationship-driven professional who enjoys coordinating people and processes, solving operational challenges, and building partnerships. It offers an excellent opportunity to develop expertise in commercial real estate valuation while playing a vital role in delivering exceptional service to clients.

We have several steps in our quality processand an inspector could be placed in a variety of areas. AOI inspectors manage an Automated OpticalInspection process to verify circuit boards coming off our manufacturing linesare correct. May provide on-the-job-training (OJT) for other inspectors.

Here is what you will be doing each day:.Conducting daily inspections of all areas cleaned by the Housekeeping Department including the guest rooms and public areas.Records all relevant information on the Housekeeping Inspection Report.Distributing to the Room Attendants any new items that are to be

OmniSource • Grade and inspect incoming metals materials, • Direct customers throughout the facility, • Assist customers as needed, • Sort and move materials as needed, • Comply with all safety guidelines, • All other duties as assigned, • A clear understanding and adherence to safety regulations, • Ability to work in all types of weather conditions, • Must be able to lift 50 pounds or more repetitively on a regular basis, • Ability to stand for long periods of time on a daily basis, • Must be self-motivated team player, anxious and willing to learn new skills, • Ability to make decisions in a fast paced, ever changing environment Benefits: • Paid weekly bonus, • Paid vacation time, • Company paid and supplemental life insurance, • Comprehensive medical, dental, vision, and prescription drug insurance, • Health Savings Account with company contribution, • 401(k) with company match, • Profit Sharing, • Annual stock awards, • Stock purchase plan with company match, • Employee tuition reimbursement, • Dependent scholarships, • 10 paid holidays, • Comprehensive employee discount database Steel Dynamics, Inc., and all affiliated entities are equal opportunity employers.

A Superintendent at Irby Construction Company shall possess a minimum of five (5) years of Transmission construction experience (Foreman or Above). The individual will possess all of the skills required for assignment as a superintendent for any craft within his/her area of responsibility. Such an employee shall also have in depth knowledge of all applicable OSHA codes and standards. Must be able to direct multiple crews. THIS JOB POSTING IS FOR TX AND OK. Attend pre-construction meeting with PM/Estimator. • Provide technical assistance, interpretation of drawings, recommend construction methods and equipment etc. as required., • Review bid packages for accuracy, completeness, and overall electrical scope of work., • Assist in instituting construction plans, • Organize crews & assign foreman to job task, • Generate list of required personnel & equipment., • Generate initial list of required tooling., • Arrange for personnel & equipment transfers to project. Construction Duties • Review and become familiar with multiple contracts., • Accountable for quality of work to ensure that it is being performed according to specifications., • Visit crews and monitor their safety, quality, & production., • Assist the Foreman in coordination of major project activities such as critical tasks, • Get feedback from owner on quality, safety, schedule, materials etc., • Attend all required project meetings with Owner as needed., • Assist with updating schedules and/or progress reports., • Verify that as-builts & progress charts are maintained., • Have a good line of communication with inspector., • Insure that all change-orders are documented and billed to the Owner. General Duties • Review personnel with Operations (i.e, personal evaluations, pay raises, CDL requirements, personal problems, loans, etc.)., • Arrange and/or participate in weekly foremen meetings (review if not attending)., • Ensure grounding procedures and EPZ zones are maintained, • Participate in monthly job safety review meetings., • Accountable for cost, progress and schedule for duration of project., • Assist BU with monthly forecast monthly., • Accountable for compliance with safety program and review all accidents., • Follow up on any complaints (from owner, general public, or landowners)., • Must have at least 5 years of Transmission Construction experience. (Foreman or Above), • Adheres to all Company Safety and Health Policies, • Must have a valid driver's license., • Must be willing to stay out of town. Typical work weeks are 4-10 hour shifts or 5-10 hour shifts. Available to travel as the project requires., • Willing to work over-time and be able to work extended periods of time., • May work in storm restoration operations to rebuild and/or repair damaged power systems., • May attend training classes or seminars to gather knowledge of new processes, safety regulations and/or refresher training., • Walking and working across uneven terrain., • Climbing on and off large trucks and equipment., • Must be able to work outside 100% of the time. We work in inclement weather that includes heat, cold, rain and possible snow., • Able to lift in excess 50 pounds on a daily basis., • Willing to work off the ground in man baskets. Normal working heights are 60' -200'' heights., • Must be able to work around energized systems and maintain minimum approach distances, • Paid Vacation, • Paid Holidays, • Medical, • Dental, • Vision, • Life Insurance, • 401K All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Camtronics, a subsidiary of HEICO Corporation, a NYSE-traded company (NYSE-HEI) is seeking a Quality Control Inspector.The Quality Control Inspector will be responsible for conducting visual and mechanical inspections on aerospace components in accordance with inspection procedures.This position is

Understanding of nonconforming product.

Quality InspectorInspectors are key personnel in the Accurus Quality Department, and their duties are integral to our overall quality management system and customer satisfaction.These employees perform inspections on newly received goods and work-in-process, and are responsible for final inspections