Mechanic jobs in Inglewood, CaliforniaCreate job alerts

The Plant Repairperson is responsible for the daily maintenance and repair of the ready-mix concrete plant as well as other miscellaneous work that needs to be performed including but not limited to the electrical systems, feeders, screens, conveyors, etc. At CalPortland, we’re proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from. All regular full time employees may enroll in a variety of health and welfare plans including medical, dental and vision plans. Other benefits include life insurance, disability coverage, employee assistance program, and retirement program. The company also has a variety of voluntary benefits for employees to choose from. $37.02/ hr • Diagnose problems and perform mechanical repairs and maintenance to ready mix plant machinery, including but not limited to batch plants, motors, conveyors, electrical equipment, etc., • Inspect, service and report the condition of machinery needing repair; maintain a service log, • Rebuild or fabricate parts and repair electrical equipment, • Utilize a variety of hand tools to repair, adjust, and dismantle equipment being repaired and/or installed, • Read and interpret technical manuals, • Coordinate ordering with purchasing team parts from approved vendors, • Operate fixed and mobile equipment as necessary; use loaders to move and lift parts into place, • Must always wear personal protective equipment (PPE) in designated areas, • Comply with all environmental, health, and safety policies and procedures and requirements High School Diploma/GED • Valid driver’s license and safe driving record, • Welding and cutting experience is necessary, • Will be required to work overtime and weekends as business needs determine, • Must be able to work in a heavy industrial environment; exposure to weather elements, dust, noise, etc., • Some work will be performed in confined spaces and at extreme heights, • Physical requirements: standing, walking, kneeling, climbing, crouching, stooping, bending, feeling, balancing, sitting, and frequent lifting of up to 50 lbs., • Strong communication, written, and oral skills, • Must be able to wear all required personal protective equipment including safety glasses, respiratory protection, safety belts, gloves, etc., • Familiarity with OSHA regulations, • Work independently and lead a team, • Ability to operate loaders and various other types of mobile equipment preferred, • 3 years’ experience as a mechanic in the ready-mix/concrete industry is preferred Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated on-going drug and alcohol testing.

Overview: At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: Competitive pay from $45.00 hr - $60 hr range and sign-on bonus up to $5,000 DOE!!!, • Relocation Available!, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time. • Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectations, • Provides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner., • Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base., • Test malfunctioning systems and components using electrical and/or mechanical skills., • Maintain legible corporate and personal records of work history., • Provides department support by processing job tickets, and work orders to the necessary department promptly., • Provide support by picking up, delivering, and installing cases., • Perform work on minor construction and remodeling projects including startups of new installations., • Drives company vehicle in a safe manner., • Performs other related duties and projects as assigned by management. Qualifications:, • High school diploma/GED., • EPA certification., • Certification from an accredited vocational-technical or trade school is a plus!, • Minimum 3+ years of commercial refrigeration experience required., • Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus., • Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful., • Must have a good driving record and be able to work independently., • Emergency on-call availability is a basic requirement., • Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time., • A valid REAL ID is required for this position due to access requirements for certain government or secured facilities. Candidates must possess a REAL ID at the time of hire. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on and . Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Job Description General Auto Repair Shop is looking for a Lube Tech/Mechanic with at least 3 years experience working in a professional establishment. Requirements: Oil change services, battery replacement, Mount and computer balance tires, maintenance services. Must have a valid CA drivers license. Strong work ethic. Knowledge of Shop Equipment. Contact Joe 818-501-7596

Job Description We are currently seeking a skilled and reliable Auto Mechanic to join our fast paced team. This position offers the opportunity to work in a professional and well equipped environment that values precision and customer satisfaction. Key Responsibilities: -Diagnostics & Repairs: Perform thorough diagnostics and repairs on engines, transmissions, brakes, suspension systems, and other mechanical components. -Preventative Maintenance: Perform routine vehicle maintenance services, including oil changes, filter replacements, and system inspections. -Communication: Clearly explain mechanical issues and repairs to service advisors, team members and when necessary, to customers. -Shop Safety: Maintain a safe, organized, and clean work environment. Requirements Experience: Minimum 3 years of hands-on mechanical repair experience. Knowledge: Strong understanding of vehicle systems including diagnostics, electrical, suspension, and drivability. Certifications: ASE certification or equivalent is a plus. Technical Proficiency: Experience with scan tools, diagnostic software, and repair databases. Tools: Must have own tools Benefits Competitive Pay: depending on experience, ASE certifications, etc Health Insurance: Available for full-time employees (medical, dental, vision, 401k) Paid Time Off: 5 days paid sick leave, and major holidays.

Job Description Overview Automotive Technician/Mechanic – South Gate, CA $30.00 - $40.00 hr | Weekly Pay | Full Benefits within 30 Days Amerit Fleet Solutions, a leader in fleet maintenance across the U.S., is hiring a skilled Automotive Technician/Mechanic to join our team in South Gate, CA. If you enjoy troubleshooting mechanical issues and keeping fleet vehicles running reliably, this is a great opportunity to grow your career with a stable national company. Pay & Schedule Pay: $30.00 – $40.00/hour (based on experience) Pay Frequency: Weekly pay – every Friday Schedule: Tuesday - Saturday 6:00pm - 2:30am Why Technicians Choose Amerit ✔ Weekly Pay – Reliable paycheck every Friday ✔ Benefits Start Fast – Medical, dental, vision within 30 days ✔ 401(k) Match – Plan for your future ✔ Paid Time Off – Vacation, holidays, and sick time ✔ Boot Allowance & Safety Gear Reimbursement ✔ Training Through Amerit University ✔ ASE Certification Reimbursement & Bonuses ✔ Employee Referral Bonuses (Up to $500) ✔ Career Advancement Opportunities Nationwide What You’ll Do • Perform preventive maintenance and repairs on light to medium duty fleet vehicles, • Diagnose mechanical and electrical issues, • Conduct inspections to ensure vehicles meet safety and compliance standards, • Accurately document repairs and complete work orders, • Maintain a clean and organized work area, including your tools and equipment, • Follow all safety procedures and company policies, • Collaborate with supervisors and team members to support fleet operations What We’re Looking For • 5+ years’ of hands-on experience performing automotive vehicle maintenance and repairs, • Strong diagnostic and troubleshooting skills, • Valid driver’s license, • Ability to own and maintain the personal tools and toolbox required for the role, • Ability to work effectively both independently and as part of a team, • Willingness and ability to meet the physical demands of the position (detailed below), • Must be eligible to pass standard pre-employment screenings, including drug screen and DOT physical (if required) Working Conditions This role involves working in a mobile, outside and/or shop environment with exposure to dust, diesel fumes, noise, and mechanical materials such as oils and greases. Technicians must be able to perform essential job functions that include frequent movement such as standing, walking, climbing, bending, and sitting for extended periods, as well as lifting heavy objects and accessing tight or confined spaces. This position requires regular use of hands to grasp, reach, handle, and operate tools and equipment. Technicians may be required to work at heights using ladders or elevated platforms and must be able to safely perform duties in various weather conditions. Due to the active work environment and movement of large vehicles, the ability to see and hear sufficiently to safely navigate the workspace is required. Reasonable accommodations may be made to support individuals with disabilities in performing essential job functions. Ready to Join a Growing Team? Apply today to join Amerit Fleet Solutions and build a career with a company that values safety, reliability, and skilled technicians. https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #AutomotiveMechanic #NowHiring #AutomotiveTechnicianCareer #MechanicJobs #AutoTechnician Responsibilities

Job Description We are currently seeking an Automotive Technician to become an integral part of our team! You will diagnose, adjust, repair, and overhaul automotive vehicles. Responsibilities: • Diagnose and repair automotive vehicles, • Perform routine vehicle tune-ups and maintenance, • Provide labor and time estimates for automotive repairs, • Inspect and test new vehicles for necessary adjustments Qualifications: • Previous experience as an automotive technician, mechanic, or other related fields, • Knowledge of diagnostic and repair equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-orientedCompany DescriptionRelaxed and safe working environment off on weekends monday-friday 8-5Relaxed and safe working environment off on weekends monday-friday 8-5

Automotive Technician Mark Dodge in Lake Charles, LA is looking for Automotive Mechanics / Auto Technicians to join their industry leading Service Team! Enjoy excellent pay and performance incentives at a dealership where your skills will be recognized and rewarded! Job Responsibilities Perform work outlined on maintenance and repair orders to ensure customer satisfaction Diagnose the cause of any malfunction and repair in a timely manner Provide labor and time estimates for additional automotive repairs Able to explain mechanical problems and needed repairs to Service Advisors and vehicle owners in a non-technical manner Job Requirements Stable Auto Mechanic work history; 3 years of experience required 3 Automotive Service Excellence (ASE) certifications preferred Ability to diagnose and repair engine, transmission, electrical, steering, suspension, brakes, and AC systems Hold a valid driver’s license Dealership Commitment: Competitive wages Training Health, Dental, Vision, Life, Short and Long Term Disability Insurance 401k with company match (at qualifying dealerships) Professional working environment Start your career as an Automotive Technician today. Apply Now!

Master Certified Technician / Automotive Mechanic Covert Chrysler Dodge Jeep Ram is looking for Certified Master Technicians to join their industry leading Service Team! Enjoy excellent pay and performance incentives at a dealership where your skills will be recognized and rewarded! Must be willing to relocate to Austin, TX! Relocation Assistance provided. Job Responsibilities: Confer with customers or service advisors to obtain descriptions of vehicle problems and discuss work to be performed and future repair requirements Test-drive vehicles and test components and systems using diagnostic tools and special service equipment Diagnose, maintain, and repair vehicle automotive systems including engine, transmission, electrical, steering, suspension, braking, air conditioning, etc Able to explain mechanical problems and needed repairs to Service Advisors and vehicle owners in a non-technical manner Continuously learn new technical information and techniques in formal training sessions in order to stay in line with rapidly changing technology Job Requirements: 5+ years automotive technician experience Master certification required Ability to diagnose and repair engine, transmission, electrical, steering, suspension, brakes, and AC systems Hold a valid driver’s license Dealership Benefits: Flat rate based on experience and certifications, Performance bonuses Health club memberships, Flexible Scheduling Health, Dental, Vision, Prescription, Life, Short and Long Term Disability Insurance 401k retirement plan Paid Holidays, Paid vacations, Paid training, Paid Uniforms Reimbursement for ASE Certification Employee Vehicle Purchase Program Professional working environment Start your career with Covert Chrysler Dodge Jeep Ram. Apply today!

Job Description Perform California Star Smog Inspections or Non Star Smog Inspections. Must have Sate of California SMOG Test and Repair License. Creates and completes accurate work orders with proper documentation, pricing, authorization, and signatures. Reports all issues to manager in a timely manner and assists in resolving. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to define problems, collect data, establish facts, and draw valid conclusions Work days are Monday thru Friday from 8:30am – 5:30 with a 30 minute Lunch Saturday 8:30-3:30pm

Job DescriptionWhy This Role Matters Western Truck Exchange is hiring a GM Automotive Mechanic to diagnose, service, and repair GM vehicles, gas vehicles, passenger cars, and light-duty trucks used by local customers, fleets, and municipalities. This role is best for a technician with real hands-on experience who can diagnose issues accurately, complete quality repairs, and communicate clearly with the service team. What You Will Work On • Diagnose and repair GM vehicle systems, including engine performance, driveability, electrical, brakes, suspension, HVAC, and related systems., • Perform preventive maintenance inspections, oil changes, chassis lubrication, and related maintenance services., • Inspect vehicles for worn, damaged, unsafe, or failing components and report findings clearly., • Diagnose and repair gasoline engines, drivetrain and powertrain components, differentials, transmissions, driveshafts, PTOs, wheel ends, engine bolt-on components, ECMs, ECUs, sensors, instruments, gauges, and related electronics., • Use GM diagnostic tools and service information to confirm faults before replacing parts., • Road test vehicles as needed to verify customer concerns and completed repairs., • Document repair findings, work performed, parts needed, and job status accurately., • Support shop quality standards and maintain a clean, safe work area.What We Are Looking For, • 5+ years of practical experience in automotive inspections, diagnostics, and repairs., • High school diploma or equivalent., • Valid driver's license; CDL is a plus., • Proficiency with shop tools and hand tools; ability to supply a basic set of hand tools as applicable by role/level., • Basic computer skills for repair documentation, diagnostic systems, and maintenance records., • Reliable attendance, punctuality, and a professional approach to safety and quality., • Comfortable working in a non-climate-controlled shop environment., • Willingness to travel as needed to customer yards and training sites.Strongly Preferred, • GM automotive repair experience, especially engine performance, driveability, electrical, and diagnostics., • Experience with GM scan tools and software such as GM MDI/MDI2, GDS2, or Techline., • Experience using modern diagnostic tools and electronic service information., • Experience with CAT and Cummins engine diagnostics/repairs is a plus., • Experience with Allison transmission maintenance and rebuild-related services is a plus., • Experience working on International or Mitsubishi Fuso medium-duty platforms is a plus., • Vocational, technical, or OEM certifications.What You Get in Return, • Opportunity to earn $100,000+ annually with a competitive wage system., • Profit sharing plan., • Quarterly incentive opportunities through our Rapid Improvement Plan., • Paid training., • Employee referral bonus., • Uniform allowance., • Employee discount and paid time off., • A shop environment with professional standards, skill recognition, and advancement paths.What To Expect During Hiring, • Complete and submit an application., • Participate in interviews to confirm fit both ways., • Complete background check and drug screening requirements., • Selected candidates may receive a brief technical follow-up questionnaire to indicate proficiency across key systems and repairs.About Western Truck Exchange Western Truck Exchange is the leading retailer of used and new medium-duty commercial trucks in Los Angeles. Established in 1922, we are one of California's oldest licensed dealerships and an authorized International dealer. Our Los Angeles dealership includes a commercial truck repair facility that supports fleets, municipalities, contractors, and local businesses that rely on their trucks every day. We are fully certified for CAT and Cummins repairs and qualified to provide Allison maintenance and rebuild services. We believe our people are the driving force that keeps our customers and the transportation industry moving forward. We foster a culture of respect, appreciation, and opportunity, recognizing every employee's contribution to our shared success. We are an equal opportunity employer and prohibit discrimination/harassment in accordance with applicable laws.

Job Description Overview Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Fleet Technician in Los Angeles, CA! The Automotive Technician is responsible for the timely repair and maintenance of light to medium duty fleet vehicles to ensure a safe and efficient operation. Compensation: Competitive Hourly Pay - Paid weekly, every Friday! Pay: $35-42hr depending on experience Shift: Monday -Friday 2:00pm-10:30PM The benefits of belonging – what’s in it for you? • · Competitive hourly pay – paid weekly, every Friday, • · Full benefits within 30 days, • · Medical, dental, vision, prescription drug coverage, life insurance, disability insurance, • · 401(k) match, • · Paid vacation, holidays, and sick time, • · Commitment to your safety through boot and prescription safety glasses reimbursement, • · Career and learning development with an extensive training program through our Amerit University, • · Employee referral program, up to $500 bonus, • · ASE certification program with fee reimbursement and bonus, • · Employee recognition platform that includes opportunities to redeem points for merchandise, • · Employee assistance program (EAP), • · 24/7 nurse triage line, • · Employee discounts on cell phone service and entertainment tickets, • · Employee resource groups (ERGs) that foster inclusion, • · Wellness and fitness program through our providers What the Automotive Technician role looks like: • Prepare vehicle records and report both manually and on a computer, • Perform repairs and preventative maintenance to light and medium duty vehicles, • Perform safety inspections of equipment and prepare safety documentation required, • Comply with all applicable laws/regulations, as well as company policies/procedures, • Inspect and perform work on the under parts of vehicles, • Access any area of the equipment or vehicle to perform necessary maintenance, • Move parts to and from the job site and remove or install these parts on vehicles, • Interact with clients through both email and phone as necessary, • Perform other duties as required What our ideal candidate looks like: • At least 5 years’ experience performing vehicle maintenance or must possess auto or diesel technology diploma from an accredited technical school, • Must have valid Driver’s License, • Proficient computer skills: knowledge of Excel, Word, Fleet Management Systems, and Email, • Strong written and verbal communication skills (documentation, communication with peers, supervisors, etc.), • Must be able to operate a manual transmission vehicle to determine if operating properly, • Must provide own hand tools & toolbox. Working Conditions: • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases or other irritants, • Access any area of the equipment or vehicle to perform necessary maintenance, • Ability to move and position heavy objects, • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles, • Ability to work outside in various weather conditions. Are you ready to advance your career as an Automotive Technician with Amerit Fleet Solutions? Apply Today! https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #AutoMechanic #NowHiring #AutomotiveCareer #MechanicJobs #AutomotiveTechnician INDMF

About the Opportunity: We are representing an entrepreneurial, high-performing, and Chambers-recognized premier Corporate Practice Group seeking a Junior Partner (Non-Equity) to join their team. This role is specifically designed for a sophisticated mid-market M&A attorney who has outgrown the traditional senior associate track and is ready to take a leadership seat—driving high-caliber transactions, managing core client relationships, and actively contributing to the firm's strategic growth. If you thrive in a fast-paced, modern boutique environment that prioritizes mentorship over micromanagement and aligns with a "no-ego" ethos, this is the ideal platform for your career escalation. Responsibilities Include: • Transaction Leadership: Structuring, negotiating, and driving sophisticated middle-market mergers and acquisitions, joint ventures, private equity transactions, and strategic asset/stock dispositions from inception to close as the lead or co-lead deal mechanic., • Client Advisory & Counsel: Serving as the primary point of contact for business owners, founders, family offices, and private equity sponsors, guiding them through complex deal architecture (including rollover equity, representation and warranty insurance, and earn-outs)., • Deal Team Coordination: Overseeing and managing the entire transaction lifecycle, coordinating cross-functional teams including tax specialists, employment counsel, paralegals, and junior associates to ensure seamless execution., • Business Development & Cross-Selling: Actively cultivating a personal network to originate corporate and transactional matters while strategically cross-selling deep in-house Real Estate, Tax, and Commercial Litigation capabilities., • Sophisticated Document Drafting: Reviewing and drafting definitive transaction documents (including stock/asset purchase agreements, complex LLC operating agreements, and transition services agreements) with elite attention to detail., • Practice Integration: Partnering with Equity leadership to optimize corporate practice group efficiency, leveraging modern legal technologies and AI tools to maximize deal velocity and client value. Candidate Qualifications: • 8+ years of sophisticated Corporate and M&A practice experience, with a heavy emphasis on middle-market transactions. Exposure to media/entertainment, technology, consumer products, or real estate joint ventures is highly valued., • Proven Deal Track Record: Extensive experience leading the negotiation of primary transaction documents and managing multi-million dollar closing processes., • Commercial Acumen: A demonstrated aptitude or strong foundation for business development, with a modest portable book of business preferred (or an actionable, strategic plan to transition existing relationships)., • Leadership Excellence: Exceptional drafting, commercial negotiation skills, and a natural ability to confidently advise founders and C-suite executives through high-stakes transitions. Position Details & Culture: • Billable Target: 1,800 hours (Inclusive of credit for approved firm development, client pitches, and associate mentorship)., • Work From Home Available: Yes, hybrid schedule of 2-3 days a week., • Firm Support: Dedicated Business Development & Marketing Budget to expand your practice. Salary and Other Compensation: The annual salary for this position is between $300,000 – $400,000 Factors which may affect pay within this range may include geography/market, skills, education, experience and other qualifications of the successful candidate. (Please Note: This role also features a highly competitive, transparent origination bonus structure). Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: • medical insurance, • dental insurance, • vision insurance, • 401(k) retirement plan, • Short/Long Term Disability, • AD&D and Life Insurance Benefits, • Parking/Transit subsidy, • Generous PTO/vacation policy

We have an immediate need for an Entry Level Mechanical for one of our Oil and Gas clients. Great direct hire position in South Gate, CA. The Entry Level Mechanic, under the direction of senior mechanics, is responsible for the maintenance, repair, and installation of centrifugal, gear, vacuum, metering, diaphragm, progressive cavity, and other types of pumps. The Entry Level Mechanic also services compressors, gearboxes, cooling towers, and steam traps. Duties include shaft alignment, vibration analysis, and implementation and maintenance of API seal support systems. ESSENTIAL DUTIES AND RESPONSIBILITIES • Maintain, inspect, clean, repair, rebuild, and install pumps, electric motors, pneumatic & hydraulic equipment, compressors, combustion engines, and other rotating and mechanized equipment, • Install mechanical seals and diagnose failed seals, • Perform diagnostic work to determine the cause of rotating equipment failures, • Use PPE, lock out/tag out/block out, and safe work permits to safely work around high temperatures, corrosive fluids, and respiratory hazards, • Operate forklifts & mobile elevating work platforms, • Install form work and epoxy grouting of pump pedestals, • Maintain service and inspection records, • Keep track of consumption of parts and spares, • Assist with periodic safety inspections; identifies and corrects safety hazards, • Respond to after-hours call-ins, • Advise department personnel regarding shaft alignment, impeller and bearing clearances, fastener torquing, vibration analysis, and other quantifiable specifications and best practices, • Performs other related duties as required QUALIFICATIONS • Knowledge of and experience utilizing precision tools including but not limited to micrometers, calipers, machinist levels, dial indicators, bore gauges, etc., • Experience with vibration monitoring, • Familiarity with presses, torches, pullers, lifting equipment, rigging, etc., • Strong diagnostics abilities and mechanical aptitude, • Ability to read and decipher pump performance curves, • Basic knowledge of mechanical seals and common seal failure causes, • Basic electrical skills desired, • Experience with CMMS software desired EDUCATION and/or EXPERIENCE • H.S. Diploma or GED, • Minimum 2-year experience in the installation, repair, and maintenance of rotating equipment LANGUAGE SKILLS • Ability to effectively communicate in English verbally and in writing, • Ability to communicate in Spanish is desired CERTIFICATES, LICENSES, REGISTRATIONS Forklift certification desired MEWP certification desired Salary range: $60,000-$67000 Apply now for immediate and confidential consideration!

About the Role: OTS is seeking an experienced Wastewater Treatment Mechanic to support one of California's most advanced wastewater treatment and water purification facilities. This is an opportunity to work on cutting-edge treatment technologies, including membrane systems, reverse osmosis, UV disinfection, biological nutrient removal, and advanced water reuse processes. We're looking for a skilled mechanical professional who thrives in a complex industrial environment and is passionate about maintaining critical infrastructure that protects public health and supports sustainable water resources. Responsibilities • Lead daily maintenance activities and prioritize work orders, • Troubleshoot and repair pumps, blowers, compressors, valves, gearboxes, and conveyance systems, • Support maintenance of membrane bioreactor (MBR), reverse osmosis (RO), UV disinfection, and advanced treatment equipment, • Coordinate with operations, engineering, contractors, and vendors to minimize downtime and maximize system reliability, • Interpret mechanical drawings, P&IDs, technical specifications, and OEM manuals, • Oversee equipment installations, upgrades, and commissioning activities, • Support preventive, predictive, and corrective maintenance programs, • Document maintenance activities and asset history within CMMS systems, • Participate in safety programs, job hazard analyses, and lockout/tagout procedures, • Provide technical guidance and mentorship to junior maintenance personnel Qualifications • Four years of full-time experience assisting in the repair and maintenance of mechanical equipment or construction-related repair activities, • At least one year of experience maintaining and repairing wastewater treatment equipment, • High School Diploma or equivalent Required Skills • Mechanical troubleshooting and failure analysis, • Pump alignment and seal replacement, • Bearing installation and lubrication best practices, • Reading P&IDs, mechanical drawings, and technical documentation, • CMMS software utilization and maintenance documentation, • Preventive and predictive maintenance planning, • Industrial safety and regulatory compliance, • Collaboration with operations and engineering teams Preferred Skills • Six to ten years of hands-on mechanical maintenance experience in wastewater treatment, advanced water purification, water reuse, industrial process facilities, or similar environments, • Experience maintaining advanced treatment systems and process equipment, • Strong troubleshooting and diagnostic skills in complex treatment facilities, • Experience supporting reliability-centered maintenance programs Pay range and compensation package: Pay Rate: $52.93 per hour About the Company: Operational Technical Services (OTS) is one of the fastest-growing water and wastewater staffing firms in the United States. We connect skilled professionals with industry-leading utilities, municipalities, and water infrastructure projects nationwide. Equal Opportunity Statement: If you're an experienced wastewater mechanic looking to work with advanced treatment technologies while making a meaningful impact on water sustainability and environmental stewardship, we'd love to hear from you.

Maintenance Mechanic with Growing Food Company / $25-$30 an hour depending on Experience/ Excellent Benefits and Room for Growth This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $30 per hour A bit about us: We specialize in powder and liquid blending. The site includes production areas, warehousing, shipping/receiving, a laboratory, and administrative offices. We operate as a close-knit, collaborative environment supporting a wide range of manufacturing and facility functions Why join us? Pay Range is $25-$30 an hour depending on Experience Excellent Benefits and Room for Growth Monday-Friday 8am-4:30pm 401K PTO Vacation Time Job Details The Maintenance Technician will support the overall reliability, functionality, and upkeep of the facility and production equipment. This role requires a versatile skill set and the ability to work across multiple departments to support day-to-day operations, troubleshoot issues, and ensure that equipment and facility systems remain in optimal working condition. Key Responsibilities Perform equipment repairs, mechanical troubleshooting, and general maintenance across all facility areas Assist in maintaining production machinery and facility systems to minimize downtime Support and execute preventive maintenance tasks and reliability initiatives Work alongside Operations, Production, and Laboratory personnel to address maintenance needs Conduct light MIG and TIG welding (primarily stainless steel) on an as-needed basis Contribute to facility improvements, safety enhancements, and operational efficiency projects Qualifications Broad mechanical aptitude and the ability to handle diverse maintenance tasks Experience with MIG/TIG welding preferred Exposure to manufacturing or industrial environments highly beneficial Strong problem-solving ability and a reliable, self-driven work ethic Ability to collaborate effectively with multiple departments Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Maintenance Mechanic with Growing Food Company / $25-$30 an hour depending on Experience/ Excellent Benefits and Room for Growth This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $25 - $30 per hour A bit about us: We specialize in powder and liquid blending. The site includes production areas, warehousing, shipping/receiving, a laboratory, and administrative offices. We operate as a close-knit, collaborative environment supporting a wide range of manufacturing and facility functions Why join us? Pay Range is $25-$30 an hour depending on Experience Excellent Benefits and Room for Growth Monday-Friday 8am-4:30pm 401K PTO Vacation Time Job Details The Maintenance Technician will support the overall reliability, functionality, and upkeep of the facility and production equipment. This role requires a versatile skill set and the ability to work across multiple departments to support day-to-day operations, troubleshoot issues, and ensure that equipment and facility systems remain in optimal working condition. Key Responsibilities Perform equipment repairs, mechanical troubleshooting, and general maintenance across all facility areas Assist in maintaining production machinery and facility systems to minimize downtime Support and execute preventive maintenance tasks and reliability initiatives Work alongside Operations, Production, and Laboratory personnel to address maintenance needs Conduct light MIG and TIG welding (primarily stainless steel) on an as-needed basis Contribute to facility improvements, safety enhancements, and operational efficiency projects Qualifications Broad mechanical aptitude and the ability to handle diverse maintenance tasks Experience with MIG/TIG welding preferred Exposure to manufacturing or industrial environments highly beneficial Strong problem-solving ability and a reliable, self-driven work ethic Ability to collaborate effectively with multiple departments Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Strategic Materials Job Description: Maintenance Supervisor Position Objective: Maintain the plant equipment to optimize production. Key Responsibilities: • Manage the plant preventive maintenance program., • Function as hands on lead mechanic to trouble shoot and repair equipment., • Supervise and lead the plant maintenance team of 2-4 employees., • Oversee maintenance on forklifts and loaders., • Fix/repair equipment as needed., • Perform basic electrical trouble shooting skills., • Train plant personnel to perform basic maintenance., • Perform periodic preventive maintenance checks as required., • Manage spare parts inventory, order parts as needed, and determine inventory and stock levels for spare parts., • Support continuous improvement initiatives. Required Skills: • Advanced mechanical maintenance skills, • High school diploma, or equivalent, required, • Associates degree or technical training, preferred, • 5-10 years of maintenance experience required, • 3-5 years of supervisory or lead experience, • Ability to lead and direct the work of others, • Good communications skills., • Basic electrical maintenance skills required, 480vAC/3/60 a plus., • Computer skills, including Excel, Word, and Outlook, • Self-starter who can succeed with limited supervision, • Detail oriented with proven problem solving and troubleshooting skills, • Ability to work in a dusty environment.

Job Description • Perform preventative maintenance on warehouse and production equipment, • Troubleshoot and repair mechanical, electrical, pneumatic, and hydraulic systems, • Inspect machinery to identify issues before breakdowns occur, • Repair conveyors, forklifts, pallet jacks, packaging machines, and refrigeration equipment, • Respond quickly to equipment downtime and emergency repairs, • Maintain maintenance logs and repair records Food Warehouse Specific Duties • Ensure equipment meets food safety and sanitation standards, • Follow GMPs (Good Manufacturing Practices) and OSHA safety regulations, • Assist with cleaning and sanitizing machinery when needed, • Monitor refrigeration and temperature-controlled systems, • Help maintain compliance with FDA and warehouse safety requirementsCompany DescriptionWe provide great opportunities for our associates while supporting clients with dependable staffing solutions.We provide great opportunities for our associates while supporting clients with dependable staffing solutions.

Job Description TITLE: HVAC MECHANIC III DEPARTMENT: Facilities JOB CODE: HVM3 DATE: 04/22/2026 REPORTS TO: Facilities Manager DLSE STATUS: Exempt The HVAC Mechanic III performs maintenance and service repairs on heating, ventilating, and air conditioning systems. Install new units or replacement parts for existing units according to specifications and established safety guidelines. Follow blueprints or engineering specifications to install units. Performs troubleshooting to identify the cause of problems. Maintains and secures a spare parts inventory. Recommends purchasing maintenance equipment and supplies as required to improve processes and efficiencies. · Installation & Repair: Install, service, refurbish, and preventively maintain HVAC and refrigeration equipment, including compressors, condensers, chillers, boilers, cooling towers, heat pumps, packaged AC units, and related controls · Troubleshooting: Diagnose and resolve complex system issues, including electronic, pneumatic, and network-connected controls · Preventive Maintenance: Perform routine inspections, cleaning, lubrication, alignment, and adjustments to ensure system efficiency and compliance with codes · System Balancing: Balance HVAC systems to optimize airflow and temperature distribution · Refrigerant Handling: Overhaul and recharge refrigeration systems, following EPA Section 608 certification requirements. · Parts & Inventory: Maintain spare parts inventory, recommend purchases, and coordinate material needs · Building Management Systems (BMS): Interact with and adjust BMS to monitor and control HVAC operations · Emergency Response: Respond to 24/7 service calls and critical alarms. · Compliance & Safety: Ensure all work meets local, state, and national codes; follow safe tool and equipment handling procedures · Other duties as requested. · Requires a high school diploma or equivalent. · EPA Section 608 Certification (CFC) · HVAC Mechanical State License · Three (3) to five (5) years’ related experience. · Knowledge of general principles and theories of pressure, vacuum, vaporization, and heat conduction, and safety regulations. · Skill in the use of tools required to maintain and repair HVAC equipment. · Ability to understand and follow directions, to work from blueprints and sketches; to maintain proper heating, ventilation, and air conditioning levels; to diagnose malfunctioning units; to maintain records; and to communicate effectively. · The ability to perform highly detailed work with sustained attention and care while providing/obtaining information on numerous inquiries is paramount to success in this position. • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Trunk Strength — The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing., • Occasional stooping and frequent standing, constant walking, sitting, climbing, reaching high/low levels, finger movement, feeling, speaking clearly, hearing conversationally, and seeing far and near. · Position is on site unless specific authorization from the manager. · The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · Occasionally required to work in confined space. · The mental demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · Frequent variety of unrelated tasks. Constant calculating, interrupted work, a variety of interrelated tasks, and use of sustained concentration, reasoning, judgment, resourcefulness, analytical ability, and ingenuity. · Ability to work effectively with a diverse community. Excellent benefits: Medical, dental, vision, retirement plan, vacation accrues on first day of employment, wellness programs, 17 paid holidays per year, up to 16 hours of paid time off to participate in community service and much more. Salary range: minimum $74,014.32 to maximum $92,517.90 Full Time EEO Statement: Charles R. Drew University is committed to Equal Employment Opportunity. Applicants will be considered without regard to gender, race, age, color, religion, national origin, sexual orientation, genetic information, marital status, disability or covered veteran status. Fair Chance Statement: Charles R. Drew University of Medicine and Science will consider qualified applicants, including those with criminal histories, in a manner consistent with state and local “Fair Chance” laws.

Job DescriptionWestern Bagel® started with a simple dream to provide good bagels to a bagel-barren West Coast. Seventy years later, with ten retail locations, as well as national and international wholesale distribution. With the help of exciting and loyal employees who support us, Western Bagel® has become “The Bagel That Won The West®”. NOW WE WANT YOU TO JOIN OUR TEAM as a MAINTENANCE MECHANIC TEAM MEMBER in our VAN NUYS location. Job Details: Salary: $28.00 - $34.00 per hour Benefits: As a full-time employee, you are eligible to receive excellent benefits, which include; • Excellent starting wage, • Comprehensive Healthcare Benefits (Health, Medical, and Vision), • Generous Holiday and Vacation, • 401k, • Free Bagels! Schedule: • 2nd shift, • 3rd shift, • Holidays, • Weekend availability ESSENTIAL DUTIES AND RESPONSIBILITIES • The Maintenance Mechanic must diagnose and repair faulty equipment while working under pressure and with compressed timelines., • Perform preventive maintenance inspections and service on machines; record/report on damaged, worn, or broken parts., • Clean and organize daily inventories, stocks, and otherwise maintain shop areas, parts, tools, and supplies., • Make necessary modifications and implement test runs as necessary., • Confer with the product manager regarding test results and make additional alterations to machinery as required., • Assist with tile and masonry repair., • Learn and execute common food handling safety requirements., • The Maintenance Mechanic must be able to read schematics, diagrams, service manuals, and blueprints., • Other duties as assigned. KNOWLEDGE AND SKILL REQUIREMENTS • The Maintenance Mechanic must have at least 3+ years of maintenance experience in a bakery and/or food & beverage manufacturing environment performing mechanical, pneumatic, hydraulic, minor electrical, plumbing, and carpentry-related tasks., • Mechanically inclined with great problem-solving skills and a strong knowledge of a variety of hand and power tools, meters, and material handling equipment., • Ability to interact with others in a professional, tactful, and sensitive manner., • Effective communication and organizational skills with strong attention to detail., • The Maintenance Mechanic must have the ability to thrive in a fast-paced work environment and to work independently as well as part of a team., • Basic computer literacy skills and the ability to update facility maintenance systems., • Ability to work a flexible schedule, as needed., • Some vocational or community colleges with related coursework or equivalent experience are required. PHYSICAL DEMANDS AND WORK ENVIRONMENT (SUMMARY) While performing the duties of this job, the Maintenance Mechanic is regularly required to sit; use hands to grasp, handle, or feel; reach with hands and arms; and talk and hear. The Maintenance Mechanic frequently is required to walk, stand, stoop, kneel, and crouch. Specific vision abilities required by this job include close vision and color vision. The physical demands described here are representative of those that must be met by a Maintenance Mechanic to successfully perform the essential functions of this job. The noise level in the work environment is usually moderate. Work is regularly performed in a combination of bakery and shop environments. The Maintenance Mechanic is regularly exposed to dust, odors, oil, fumes, noise, water, heat, and cold temperatures below 0 degrees.

Position Summary We are seeking a highly skilled Maintenance Mechanic II/III to support the maintenance, repair, troubleshooting, and optimization of CNC machining equipment and manufacturing systems within a fast-paced aerospace manufacturing environment. This position is responsible for diagnosing complex equipment issues, performing machine geometry inspections, completing major repairs, and ensuring CNC equipment consistently maintains the tight tolerances required for aerospace and defense products. The ideal candidate will possess advanced experience troubleshooting CNC mills, lathes, multi-axis machining centers, and automated manufacturing equipment while maintaining equipment reliability, reducing downtime, and supporting continuous improvement initiatives. Essential Duties & Responsibilities • Troubleshoot, diagnose, and repair CNC machining centers, CNC lathes, secondary machining equipment, and production support equipment. ., • Perform advanced mechanical, electrical, hydraulic, pneumatic, and servo system troubleshooting. ., • Conduct machine geometry inspections, laser alignments, machine leveling, spindle checks, backlash testing, ballbar analysis, and machine calibration. ., • Perform precision machine alignments to maintain aerospace manufacturing tolerances. ., • Diagnose and repair: . ◦ Servo Motors . ◦ Axis Drives . ◦ Ball Screws . ◦ Linear Guides . ◦ Turrets . ◦ Tool Changers . ◦ Hydraulic Systems . ◦ Pneumatic Systems . ◦ Spindles . ◦ Coolant Systems . ◦ Electrical Control Systems . • Troubleshoot CNC control issues involving Fanuc, Mazatrol, and similar controls. ., • Perform major machine repairs, rebuilds, and component replacements. ., • Support machine installations, commissioning, equipment moves, and production startup activities. ., • Analyze recurring machine failures and implement root cause corrective actions. ., • Maintain preventive maintenance schedules and predictive maintenance programs. ., • Collaborate with Production, Engineering, Tooling, and Quality departments to improve machine uptime and process reliability. ., • Maintain maintenance records, repair documentation, and equipment history logs. ., • Assist with training and mentoring junior maintenance personnel. ., • Support facility maintenance activities as needed.. Equipment Experience Preferred Experience troubleshooting and repairing the following equipment is highly preferred: • Mazak CNC Mills and Turning Centers ., • Haas CNC Mills and Lathes ., • Mori Seiki / DMG Mori Machining Centers ., • Okuma CNC Machines ., • Fanuc-Controlled Equipment ., • Multi-Axis Machining Centers ., • Precision Aerospace Manufacturing Equipment ., • Automated Production Equipment . Qualifications • 5+ years of CNC Maintenance experience in a manufacturing environment. ., • Aerospace manufacturing experience strongly preferred. ., • Experience performing machine geometry testing and machine accuracy verification. ., • Strong understanding of: . ◦ CNC Machine Repair . ◦ Precision Machine Alignment . ◦ Servo Systems . ◦ Hydraulics . ◦ Pneumatics . ◦ Electrical Troubleshooting . ◦ PLC Diagnostics . ◦ Preventive Maintenance Programs . • Ability to read and interpret: . ◦ Electrical Schematics . ◦ Hydraulic Diagrams . ◦ Pneumatic Drawings . ◦ Mechanical Blueprints . ◦ Technical Manuals . • Experience working on equipment holding tolerances as tight as ±0.0005" and tighter. ., • Familiarity with AS9100 manufacturing environments preferred. ., • Strong root cause analysis and troubleshooting skills. ., • Ability to work independently with minimal supervision. . Preferred Skills • Fanuc CNC Controls ., • Mazatrol Controls ., • PLC Troubleshooting ., • Machine Rebuild Experience ., • Ballbar Testing ., • Laser Calibration Systems ., • Vibration Analysis ., • Predictive Maintenance Programs ., • Continuous Improvement Initiatives . Physical Requirements • Ability to stand, bend, kneel, climb, and work around manufacturing equipment throughout the shift. ., • Ability to lift up to 50 pounds. ., • Ability to work overtime and weekends as required. . Ideal Candidate This role is best suited for a senior-level CNC Maintenance Mechanic who can independently troubleshoot and repair complex CNC equipment, perform machine geometry inspections, conduct major repairs and alignments, and support the production of high-precision aerospace connectors and interconnect systems used in commercial aerospace, defense, space, and industrial applications. The successful candidate will be capable of reducing downtime, improving machine reliability, and ensuring equipment consistently produces parts within strict aerospace quality and dimensional requirements.

Responsibilities Howmet Fastening Systems (HFS) is seeking a 2nd Shift Maintenance Electrician in our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. General Summary: The maintenance electrician is responsible for the upkeep, repair, and installation of electrical systems and equipment, ensuring they operate safely and efficiently. Will also assist in the maintenance of facilities' tools and equipment, as well as the building and its grounds. Specific Responsibilities: \n • Strictly adhere to safety regulations and plant policies.\n, • Conduct regular inspections of electrical systems, wiring, fixtures and appliances to identify faults or hazards.\n, • Perform necessary repairs on electrical systems and equipment, including troubleshooting and fixing wiring issues.\n, • Install new electrical systems, appliances, and fixtures as required, ensuring compliance with safety standards.\n, • Must maintain accurate records of maintenance activities, repairs, and inspections performed on electrical systems, by paper or electronic devices. \n, • Utilize strong problem-solving skills to diagnose and resolve electrical issues quickly and efficiently\n, • Perform highly diversified duties to install and maintain production machines and the plant facility's tools and equipment.\n, • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service.\n, • Perform mechanic skills including but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines.\n, • Read and interpret equipment manuals and work orders to perform required maintenance and service.\n, • Diagnose problems, repair or replace parts, test and make adjustments.\n, • Detect faulty operations, defective material and report those and any unusual situations to proper supervision.\n, • Perform all other duties as assigned or needed.\n, • At the end of the shift, secure all equipment and complete all necessary paperwork.\n\n Qualifications Basic Qualifications. \n • 7+ years of total experience as an industrial electrician in manufacturing environment\n, • Active electricians license\n, • Basic knowledge of advanced industrial wiring, advanced industrial electronics, and PLC Programming \n, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position\n, • This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items\n\n Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. The hourly range for this position is $27-$38. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected]

Job DescriptionJob Title: Maintenance Technician II - Mechanical & Robotics Job Description As a Maintenance Technician II, you will leverage your technical skills to support the Operations Maintenance team in repairing and maintaining material handling equipment and pneumatic systems throughout the building. You will have the opportunity to install, maintain, and repair automated packaging and distribution equipment. Responsibilities • Perform preventive maintenance on conveyor systems and automation equipment., • Conduct repairs and maintenance on material handling equipment and pneumatic systems., • Install, maintain, and repair automated packaging and distribution equipment., • Mentor junior technicians in robotics and troubleshooting processes., • Utilize troubleshooting skills to diagnose issues with material handling equipment., • Read and interpret blueprints and electrical schematics.Essential Skills, • 1+ years of experience with Microsoft Office products and applications., • 2+ years of experience conducting predictive and preventative maintenance procedures., • 2+ years of experience repairing material handling equipment, automated conveyor systems, or related mechanical/controls equipment., • 2+ years of experience reading blueprints and electrical schematics., • 2+ years of demonstrating safety standards., • 1+ years of experience in troubleshooting and diagnostics of material handling equipment., • High school diploma or equivalent.Additional Skills & Qualifications, • Experience in mentoring junior technicians., • Experience in working with robotics and electrical systems.Why Work Here? Join a dynamic team where your skills will be valued and developed. Benefit from a flexible work schedule and the opportunity to work with advanced technologies in a supportive and innovative environment. Work Environment Work a flexible schedule, including weekends and nights. Engage with a variety of advanced technologies and equipment in a dynamic and supportive facility. Job Type & Location This is a Contract to Hire position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $32.50 - $32.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jun 22, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Founded in 1946, Angelus Block is California’s leading producer of concrete masonry units, interlocking concrete pavers, decorative site wall units, and segmental planter wall units. We are currently seeking to direct hire a full-time Industrial Maintenance technician with electrical experience. **Interested candidates can complete an application ONSITE from Monday through Friday 7:00 am to 04:00 pm. Address TO APPLY: 252 E. Redondo Bch. Bl. Gardena, CA 90248- please make sure to sign and fill out the application completely* Industrial Maintenance Mechanic with Electrical Experience- • THIS IS A FULL-TIME DIRECT HIRE POSITION., • 1ST SHIFT AVAILABLE, • FREE MEDICAL BENEFITS AFTER 90 DAYS. Job Description Maintains production and quality by ensuring the safe and efficient operation of machinery and mechanical support equipment. Primary Job Duties: • Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on Production equipment — Pneumatic, Hydraulic, Mechanical and Electrical per Manufacturer’s specifications., • Locates sources of problems by listening to the Operators, observing equipment operation, listening for problems and using a step-by-step problem solving approach., • Perform general electrical maintenance., • Inspect transformers and circuit breakers and other electrical components., • Troubleshoot electrical issues using appropriate testing devices., • Repair and replace equipment, electrical wiring, or fixtures., • Follow National Electrical Code state and local building regulations., • Circuit breaker corrective maintenance., • Removes defective parts by dismantling devices using both hand and power tools., • Determines changes in dimensional requirements of parts by inspecting used parts using tape measure, ruler, calipers, micrometers and other basic measuring tools., • Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges., • Maintains equipment parts, supplies, and inventory by communicating to Plant Superintendent of actual levels., • Works on multiple pieces of equipment through an order of priority that will be given by the Plant Superintendent., • Maintains continuity among shifts by documenting and communicating actions, irregularities, and needs of equipment or operating personnel., • Maintains safe and clean work environment by complying with procedures, rules and regulations., • Uses recommended Personal Protective Equipment (PPE) as needed and effectively use Lock-Out Tag-Out procedures when working on equipment. Other job duties: · Works and drives towards a team environment · Have the ability to cut, torch, weld and/or fabricate with steel when needed · Ability to work extended hours to meet production demands · Plan work in an effective manner, and keep accurate records of work performed and materials used · Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. Skills Needed: • Familiar with automation equipment : pneumatics, cylinders, sensors, relays and computers., • Operation Monitoring: Observes moving equipment, looks at gauges, dials, or other indicators to assess equipment performance., • Troubleshooting: Determines causes of machine downtime, poor quality or performance and decides on best course of action to temporarily correct with future permanent fix planned., • Equipment Installation: Installs support equipment, machines, hoses, basic wiring, and lubrication fluids to meet requirements using industry best practices, • Equipment Maintenance: Performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Required experience: • Job Experience is required: 5 years, • Electrician experience 5 years Education: • High School diploma , GED or Trade School Training Minimum physical requirements: Must have the physical stamina to perform continuously with full body motion for climbing, reaching, pushing and lifting, etc. Communication skills English and Spanish preferred but not required. Constant- Seeing, carrying, gripping objects under 20lbs. Frequent- Bending, reaching, sitting, lifting objects under 20lbs. Occasional- feeling, climbing, balancing, hearing, stooping, standing, walking, driving, twisting, hand tools. Pushing and pulling objects under 20 lbs. Carrying, lifting, pushing, pulling items from 20 lbs up to 100 lbs. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, age, status as a protected veteran, status as a qualified individual with a disability, or any other protected class status. Angelus Block Co., offers a competitive salary and excellent benefits. Angelus Block Co. is an Equal Opportunity Employer. Call for any other questions: 818-767-8576 EXT 143 Human Resources Company DescriptionFounded in 1946, Angelus Block Company, Inc. is California's leading producer of concrete masonry units, interlocking concrete pavers, decorative site wall units, and segmental planter wall units.Founded in 1946, Angelus Block Company, Inc. is California's leading producer of concrete masonry units, interlocking concrete pavers, decorative site wall units, and segmental planter wall units.

Job Description M.S. Aerospace Inc. (MSA) is an aerospace manufacturer of high strength specialty fasteners, including bolts, screws, studs, and pins. Our products are of the highest quality and very close tolerances. Our products support the US Government, including the ISS, Space Shuttle and the most demanding defense equipment. We also support the most demanding OEMs in the commercial aviation industry. We offer a competitive benefits package including medical, dental, vision, and a monthly bonus. Join one of the fastest-growing aerospace companies by applying now ! Maintenance Mechanic Department: Maintenance Department/ Area: Maintenance Position Summary: Maintenance Mechanic will manage and troubleshoot the day-to-day maintenance needs of all equipment and machinery. Responsibilities include maintenance and repair of manufacturing equipment such as such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment using hand tools, power tools, and precision-measuring and testing instruments. The Maintenance Mechanic Operator will observe mechanical devices in operation and listens to their sounds to locate causes of trouble. Dismantles devices to gain access to and remove defective parts using hoists, cranes, scissor lifts, forklifts, hand tools, welding, and power tools. Repairs or replaces defective parts, using hand tools and power tools, etc. Installs special functional and structural parts in devices, using hand tools and power tools. May set up and operate a lathe, drill press, grinder, and other metalworking tools to make and repair parts. May initiate purchase order for parts and machines. Minimum Qualifications: · High School graduate or equivalent. · 3+ years of maintenance experience manufacturing environment performing mechanical, pneumatic, hydraulic, minor electrical. · Knowledge of electric motors, generators, pumps, pressure systems, water systems and other equipment and systems found in fastener manufacturing facilities · Knowledge of the occupational hazards and safety precautions of the building maintenance trades. · Knowledge of the proper use of chemicals. Ability to do routine mechanical or electrical maintenance and care for tools and equipment. · Ability to work from sketches, drawings, and blueprints. Ability to maintain records regarding material, equipment, and repairs. Reporting Relationships: Will report to the Maintenance Manager Working Conditions: First shift position. Standing stooping, bending, squatting, and sitting, walking both inside and outside. Some warm weather conditions, some cold weather conditions depending upon seasons. The job duties require an employee to bend, reach, kneel, and stand for extended periods. The job duties may require an employee to climb ladders. The job duties may require an employee to move heavy objects. Position type: Requires full work time only. 8 hours a shift- Monday to Friday - overtime expected depending on production needs. Regular attendance is an essential job function. This job description in no way states or implies that these are the only duties to be performed by this employee. He or she will be required to follow any other instructions and to perform any other duties requested by his or her supervisor. M.S. Aerospace Inc. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. M.S. Aerospace Inc. will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of Los Angeles Municipal Code, Chapter XVIII, Article 9. M.S. Aerospace Inc. 13928 Balboa Blvd Sylmar, CA 91342. Company DescriptionMSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications. M.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA: Materials Engineer Evaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices. Will accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field. 40 hours/week; $99,278.00 - $105,000.00/year Apply on-line w/ ref# at: https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD Reference Number: HS-MSA EEO employer: including race, gender, disability & veteran status. We offer Medical, Dental, Vision, and 401K benefits.MSA is a leading manufacturer in the aerospace industry of high-quality specialty fasteners for aerospace, medical and other high performance, applications.\r\n\r\nM.S. Aerospace, Inc., a leading manufacturer of aerospace products and parts, has the following open degreed/experienced position(s) available in Sylmar, CA:\r\n\r\nMaterials Engineer\r\n\r\nEvaluates materials and develops machinery and processes to manufacture materials for use in products to meet specialized designs and performance specifications. Performs manufacturing engineering duties such as: read blueprints, use various inspection gages (micrometer, caliper, indicator, comparator) test equipment (microscope, hardness tester, torque tester). Gathers and analyzes information skillfully. Develops alternative solutions as required under the circumstances. Prioritizes and plans work activities making use of time efficiently. Defines and analyzes problems in a timely manner and consistently meets project time deadlines. Performs engineering work related to planning, devising, or adapting methods to improve manufacturing production. Examines equipment, processes, operations, and assembly to determine time or quality revisions and suggests improvements. Responsible for carrying out changes and monitoring operations standards. Analyzes product failure date and laboratory tests results to determine causes of problems and develop solutions. Designs and directs testing or control of processing procedures, monitors material performance and evaluates deterioration. Conducts and supervises tests on raw materials or finished products to ensure their quality. Determines appropriate methods for fabricating and joining materials. Assists and guides technical staff in developing materials for specific uses in products and devices.\r\n\r\nWill accept a Master's degree or foreign academic equivalent in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Electrical Engineering or related field.\r\n\r\n40 hours/week; $99,278.00 - $105,000.00/year\r\n\r\nApply on-line w/ ref# at:\r\nhttps://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=28120&clientkey=6549A71482ECAC187AC7A85B5B90A8DD\r\nReference Number: HS-MSA\r\nEEO employer: including race, gender, disability & veteran status.\r\n\r\n\r\n\r\nWe offer Medical, Dental, Vision, and 401K benefits.

Job Description Compensation: $20 - $28 an hour. We are Southern California’s leader in uniform and linen services – family-owned and operated since 1932. Our proud heritage of quality service started 89 years, and the operation has remained in the family ever since for 4 generations. Medico Professional Linen Service is a uniform and linen service specializing in private practice and medical clinic businesses in the Southern California area. This operation is the largest linen and uniform service specializing in this niche in the United States and is now being mirrored by our industry peers in other regions of the country. Our values of team work, quality, and service have been at the heart of what we do and have strengthened our brands and business relationships. Job Summary: This position is responsible but not limited to new Installs, repairing and maintaining plant equipment and property as directed by the Chief Engineer. Maintaining inventory supplies and preparing maintenance records. Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, to engineering specifications. Job Responsibilities: • Locates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments., • Removes defective parts by dismantling devices; using hoists and hand and power tools; examining form and texture of parts., • Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments., • Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges., • Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance., • Fabricates repair parts by using machine shop instrumentation and equipment., • Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt., • Conserves maintenance resources by using equipment and supplies as needed to accomplish job results., • Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends., • Maintains safe and clean working environment by complying with procedures, rules, and regulations., • Morning start-up and/or evening shutdown of all equipment including the boilers, pumps/tanks/valves, air compressors, water softeners, soil systems, conveyor systems, tunnel washers, conventional washers, dryers, feeder/ironer/folder systems, small piece folders, steam tunnels, cart washers and all other plant equipment Required Qualifications and Experience: Education: • High School Diploma or equivalent Skills: • Must be able to read, write and communicate effectively., • Basic computer skills, • Experience working on machinery, Electrical, plumbing, welding, carpentry and boiler applications., • Ability to trouble shoot from operation manuals, manufactures instruction electrical schematics at a basic level., • Must have hand tools and power tool experience. Physical: • Must be able to walk or stand for long periods at a time during a full time shift., • Handling the maintenance task of stooping, pulling, or pushing and working in cramped spaces., • Be able to lift, push or pull 50 lbs. or more. Working conditions: Some exposure to extreme degrees of heat, noise, dust and dirt. Job Type: Full-time Salary: $20.00 - $28.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Schedule: • 8-hour shift + Overtime, • Must be available any day of the week including weekends. Work Location: In person American Textile Maintenance Co. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #ZR

Job Description Job Summary The Plant Maintenance will be responsible for all aspects of plant repair including: conveyor systems, electrical, plumbing, pneumatics and welding. Job Responsibilities • Utilize all tools safely and in compliance with manufactures specifications. Ensure that all equipment is serviced, repaired and maintained per manufacturer’s specifications and Company policy., • Assist in the scheduling of plant and equipment for work and repair. Adhere to the priorities of work specified by the supervisor to ensure that the operational needs are met., • Know and follow Lock-Out Tag-Out and all safety procedures when working on equipment. Follow all safety and environmental rules and regulations; make corrections on a priority basis. Must comply with company safety rules and regulations. Must wear proper safety equipment (PPE) while working and on plant grounds. Ensure that all items related to safety are identified, logged, and corrective action is taken in a time period that provides the safe operation of the plant., • Ability to utilize crane equipment, hydraulic equipment and specialized tools within the safety limits specified by the manufacture., • Must comply and fill out all necessary daily paper work. Includes daily log, plant repair request, Job Hazard Analysis, Permits, etc, checking in at each plant when you arrive and leave. Checking with supervisor on daily regular basis., • Ability to work scheduled hours, which could include 1st, 2nd or 3rd shifts, or overtime including weekends. Carry a company cell phone and be available to answer phone. Phone is for company business and scheduling. Qualifications • High school diploma or general education degree (GED). Trade school certification, • One year related experience and/or training; or equivalent combination of education and experience. Must be qualified experienced welder, • Must pass a physical welding exam. Knowledge, Skills, and Abilities Experience in pneumatic and hydraulic equipment functions and troubleshooting. Must be familiar with conveyors, belts, gearboxes and drives. Have electrical experience with 120V to 460V 3 phase. Be able to troubleshoot control circuits and change electric motors and components. Data entry computer skills, including work order entry and e-mail. Working Conditions • While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors as well as function safely around heavy rolling equipment, • Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors, • Must wear protective equipment while at the location Physical Requirements • Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree, • Exerting 50 – 100 pounds of force occasionally, • Exerting 25 – 50 pounds of force frequently, • Exerting 10 – 20 pounds of force continually, • Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls Legal Notices CEMEX is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. CEMEX will consider for employment qualified applicants with criminal histories in a manner consistent with all local, state and federal laws. CEMEX is an E-Verify participating employer. Arizona Smoke-Free Act. CEMEX complies with the State of Arizona’s Smoke-Free Act (Arizona Revised Statutes § 36-601.01). Smoking and/or the use of tobacco or related products is prohibited in and on CEMEX property as well as any building and/or vehicle owned or leased by CEMEX. CEMEX offers both competitive pay and benefits. Benefits applicable to this position may include, but are not limited to, medical, dental, vision, 401(k), Paid Time Off, and Holiday Pay, as well as a comprehensive wellness program to help keep employees and their families healthy and well. You can learn more about CEMEX Benefits by visiting the CEMEX USA Benefits and Well-Being page. (https://www.cemexusa.com/careers/life-at-cemex/benefits-well-being). EEO Statement - En Español CEMEX es una institución EEO/AA (igualdad de oportunidad/acción afirmativa) y no discrimina en base al sexo, edad, raza, color, religión, discapacidad física o mental, credo, origen nacional, estatus veterano, orientación sexual, información genética, identidad de género, o expresión de género en los programas o actividades los cuales opera. The expected base compensation for this position ranges from $32.55 to $38.16 per hour, depending on, but not limited to, market location, job-related knowledge, skill sets, experience, and education Company DescriptionFounded in 1906, over the last 110+ years' CEMEX has grown into a global building materials company that provides high quality products and reliable service to customers and communities throughout the Americas, Europe, Africa, the Middle East, and Asia. Here at CEMEX we offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee assistance program and retirement plan options, along with over a century of stability to build your next career on! To learn more about our company culture and why you should join us, visit us at www.cemexusa.com/careers. For direct access to CEMEX Career Opportunities, visit us at https://jobs.cemex.com/.Founded in 1906, over the last 110+ years' CEMEX has grown into a global building materials company that provides high quality products and reliable service to customers and communities throughout the Americas, Europe, Africa, the Middle East, and Asia. Here at CEMEX we offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee assistance program and retirement plan options, along with over a century of stability to build your next career on! To learn more about our company culture and why you should join us, visit us at www.cemexusa.com/careers. For direct access to CEMEX Career Opportunities, visit us at https://jobs.cemex.com/.

Job Description Repairs, installs and performs preventive maintenance on all production equipment to ensure that such equipment is in good operable condition at all times. Uses electrical and mechanical expertise to trouble shoot, repair, install and perform preventive and interactive maintenance on all production equipment accessories to ensure that all equipment is in good operable condition at all times. Primary Responsibilities: 1. Install, operates, maintains, checks, and trouble-shoots all types of A/C and D/C electrical equipment. Install, trouble-shoot, and repair solid state and electronic equipment as well as mechanical equipment., 2. Uses safe working practices and reports/repairs any hazard conditions at all times., 3. Inspects machines, takes any required test, and completed “all” reports and paperwork as required., 4. Perform PM and repair work in accordance with A.I.B. standards., 5. Diagnoses and employs proper procedure of troubleshooting to determine when parts need replacement and when repairs are necessary., 6. Dismantles, repairs, and re-assembles gearboxes, fans, conveyors, blowers, compressors, pump, valve, and mechanical equipment when directed., 7. Dismantles, repairs, and re-assembles electrical motors, relays, timers, and allied electrical equipment., 8. Installs and repairs electrical conduit, cables, piping, tubing, controls, and grounding as directed., 9. Operates mobile lift truck and hoisting in the performance of maintenance work. Possess knowledge of simple rigging when necessary for equipment moving and relocation., 10. Help maintain spare parts inventory for plant. EDUCATION & EXPERIENCE High School Diploma, GED or Equivalent preferred. 4 years of industrial maintenance/electrical experience required. Food/beverage processing or packaging environment preferred. KNOWLEDGE, SKILLS & ABILITIES: • Knowledge of local, state and federal electric codes, • Certified for PLC programming e.g., Allen Bradley or equivalent preferred., • Experience installing, programming and troubleshooting the following:, • Programmable Logic Controllers (PLCs), • Variable Frequency Drives (VFDs), • All types of AC and DC electrical and mechanical equipment., • Electrical conduit, cables, piping, and tubing, including all necessary connections, controls and grounding., • Able to read and make proper installations of complex electrical circuits from wiring diagrams., • Able to disassemble, repair and reassemble gear boxes, fans conveyors, blowers, compressors, pumps, valves, furnaces, drives and all allied mechanical equipment related to electrical troubleshooting, • Experience troubleshooting and repairing oven combustion and safety devices., • Possesses working knowledge of hydraulic, compressed air systems and be able to read complex diagrams and troubleshoot these systems, • Experience Installing and repairing pneumatic conduit, cables, piping, and tubing, including all necessary connections, controls and grounding., • Possess working knowledge of the following equipment:, • MIG/TIG/ARC welding equipment, • Gas & Plasma cutting equipment, • Power tools such as drill presses, cut off saw, lathes, mills, and table tools., • Electrical test equipment such as voltmeter, megger, ammeter, diode and SCR tester. Shift: 2nd Starting Hourly Pay: Mechanic B $34.09 + shift differential, OT, 7 Holidays, & Vacation Pay Full Benefits Packet includes the following: Health, Vision, & Dental insurance, Life & AD&D insurance, Short- & Long-Term Disability Insurance, 401(k) & matching, Flexible spending accounts, Dependent Care FSA and Health Care FSA, Referral & Retention Bonus Programs, Uniform & Shoe Allowance. Gruma Corporation and its affiliates, including but not limited to Azteca Milling, L.P., are committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin, ancestry, sex, gender, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, gender expression, marital status, or any other legally recognized protected basis under federal, state, or local law. The information collected by this application is solely for the purposes of determining suitability for employment, verifying your identity, and maintaining employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act as well as state and local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity with-out imposing undue hardship on Gruma. Please inform the company's personnel representative if you need assistance completing any forms or to otherwise participate in the application process. Company DescriptionAt Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips. Since 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.At Mission, we believe that good food can take you places. From our humble beginnings as a small tortilla factory in the San Fernando Valley of Los Angeles to becoming a global brand recognized worldwide, we’ve always strived to help you explore the endless possibilities of tortillas and tortilla chips.\r\n\r\nSince 1977, Mission® has been creating fresh, authentic Mexican food products you can find in your local grocery store including Guerrero, Maseca and Calidad to name a few. Mission®, a subsidiary of Gruma Corporation, is the #1 tortilla company in the U.S. and manufactures a variety of authentic Mexican products. As we’ve grown, we’ve made sure to always put an emphasis on authentic flavors, while providing healthy options that families and friends can enjoy together.

Job Description POSITION SUMMARY Perform all tasks Involved in the maintenance, repair and installation of industrial machinery, refrigeration, electrical and mechanical systems in a food processing plant. Ensure that all production equipment is maintained and in proper operating order. Troubleshoot equipment and machinery failures or problems and take corrective action with minimal supervision. Performs preventative maintenance on equipment and machinery and documents using the CMMS system. Repairs and/or replaces parts as needed including fabricating parts on lathes and milling machines, welding or soldering as required for the job. Works on refrigeration components and starts compressors as required. Uses a variety of hand and power tools, saws, and welding equipment. Proactively looks for ways to improve the equipment and procedures to help achieve OEE and reliability goals. KEY RESPONSIBILITIES Responsibilities include, but are not limited to: • Responsible for execution of Preventative Maintenance Duties., • Responsible for repair of equipment per written Maintenance procedures, • Repair most manufacturing and facility equipment., • Assesses problems with minimal guidance and supervision., • Interprets blueprints and schematics., • Understands electrical wiring and basic PLC, VFD and motor control, • Follows Lock Out Tag Out Procedures prior to doing any work on equipment., • Experience with Packaging Equipment (scale, case sealer, band sealers, etc.), • Perform and document preventative maintenance., • Use standard hand tools as well as specialized tools needed to perform job safely, • Promote a safety culture by following safe practices and seeking improvement opportunities for plant safety, • Completes documents as required by department guidelines, • Complies with all SOP’s, GMP's and SQF standards, • Responsible for executing all duties assigned by Management. QUALIFICATIONS Education: • High School Graduate or GED Experience: • Must have 3+ years of maintenance experience in manufacturing, • Must have basic to advance electrical knowledge Key Competencies & Traits: • Strong analytical and critical thinking skills., • Effective communicator and collaborator across all levels of the organization., • Must work effectively in a team environment., • Skilled at managing complex projects in a fast-paced environment., • Proficiency in Microsoft Office and data analysis tools., • Must be flexible to change of priorities on assigned tasks., • Must be able to communicate and interface on all levels effectively. Physical Requirements • This role requires frequent presence on the production floor and may involve exposure to noise, temperature fluctuations, and other manufacturing conditions., • Must be able to lift up to 50 pounds occasionally., • Requires the ability to walk, stand, bend, stoop, and reach., • Visual acuity requirements include close vision, distance vision, color vision, and depth perception, particularly for work with computers and troubleshooting equipment.

Job DescriptionCompany information: Aerospace MFG Company is a global provider of manufacturing and engineering services, engineered and structural solutions for complex applications in aerospace, defense and industrial markets! Industry and what does the company do? Aerospace company based in Los Angeles is seeking a Maintenance Mechanic II! Job Title: Maintenance Mechanic II Shift Hours: 6:00 a.m. to 3:00 p.m. (plus OT) Location: South Bay Pay: $25.00- $33.00 (depending on experience) Job Class: Temp-to-Hire Description: Keep plant machinery and equipment in good repair. Maintains, analyzes, and corrects problems of standard machinery as required. • Make repairs, replacements, adjustments, troubleshooting, and preventative maintenance, • General mechanical maintenance on various mechanical equipment such as pumps, cranes, hoist, hydraulics systems, vacuum pumps, and basic vehicle repairs, • Dismantles devices to gain access to and remove defective parts and examines form and texture of parts to detect imperfections, • Adjusts functional parts of devices and control instruments, • Install new equipment, • Arc, Gas, TIG/MIG Welding Required, • Demonstrates an advanced knowledge of mechanical and facilities repair and maintenance, • Ability to read, interpret, and verbally communicate documents such as safety rules, operating and maintenance instructions, and procedure manual, • Experience in hydraulics, ability to read schematics, hydraulic and electrical, • Read and understand complicated blueprints and specifications, • High school diploma or G.E.D. preferred, • Pass background and drug screenPandoLogic. Keywords: Maintenance Mechanic, Location: Los Angeles, CA - 90042 , PL: 603526311

Job Description Quality Repair Solutions (QRS®) is a comprehensive tractor and trailer repair and maintenance business that specializes in pressurized tankers. QRS ensures professional drivers get back on the road safely and quickly. We are looking for an energetic, reliable Shop Foreman to join our team in South Gate, CA. We are a dynamic, stable and growing company. We have great long term career opportunities across our headquarters, trucking terminals, mechanic shops, depots, tank washes and other locations. If you want to join the industry leader and make a difference, please consider this opportunity and apply at QRSShops.com. Compensation and Incentives • Competitive Pay - Pay is $39 - $54 / hour depending on experience, • Tool/Boot Reimbursement Program, • Referral Program Job Details Job Summary: Under general supervision from the Area Maintenance Manager supervises the maintenance of the terminal’s tractors and chemical cargo trailers ensuring assets are maintained in accordance with federal (DOT), state and local regulations and company policies. Determines the overall mechanical condition of vehicles and equipment, diagnoses component malfunctions and initiates repair actions. Maintains outside vendor and service provider relationships. Ability and desire to work in a positive, fast paced, and high energy environment. Duties and Responsibilities: • Responsible for the maintenance and repair of all equipment assigned to the company terminal. Schedules weekly, monthly, quarterly and annual preventive maintenance. Properly annotates all maintenance performed on prescribed forms and enters data into TMT and other data collection systems (Planner)., • Manages the shop facility in a safe, efficient, timely, cost effective and practical manner and in compliance with OSHA regulations and company policies. Ensure and enforce all established safety policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous wastes. Follow and reinforce with others all safety processes and protocols., • Manage and maintain inventory of parts, tools, specialized test equipment and consumables., • Schedule and supervise mechanics to meet terminal maintenance requirements within budget., • Perform additional duties as assigned by the AMM. Benefits • Medical, • Dental/Vision, • Basic Life/Voluntary Life, • Short Term and Long Term Disability, • Generous Paid Time Off/ Holiday Schedule, • Employee Assistance Program, • Employer Matching 401K Requirements Skills and Abilities: • Must Possess at least 2+ years in a Shop leadership position, • Must possess at least 5+ years' industry experience in fleet maintenance, • Knowledge is mandatory of vehicle and equipment theory, principles and repair relating to diesel engines,, • air, electrical, mechanical, and hydraulic systems., • Thorough knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and, • procedures., • Competent computer skills, specifically in Microsoft Excel and Word and other web-based applications., • Ability to use vehicle diagnostic software., • Proficient in the use and completion of repair and purchase orders produced by a maintenance, • management system., • Minimum special knowledge and skills required: 2-3 years as a fleet maintenance supervisor preferred., • DOT HM-183 training required. ASE certification not required but highly recommended., • Welding experience a Plus; Mig, Tig, Plasma, etc. Education and Experience: • High school diploma or completion of G.E.D. required. Plus course work in auto and equipment mechanics at a trade school and six (6) years of experience as a mechanic, or any equivalent combination of education and experience. (Must be able to provide documentation). Additional Job Information Supervisory Responsibilities: Training for annual/systematic inspections, HM-183, TMT, Mechanics Work Station, TINA Edit, RMS, Workflow, PO System, Coupa, and other company processes and procedures provided by RFM. Government regulations and company policies readily available. Prioritizing repairs and projects for technicians. Be able to decide if repairs can be performed in-house or if work must be sent to an outside vendor. Ensure all tractor and trailer inspections and maintenance complies with Federal FHWA standards. Use economical, reliable and up-to-date procedures to maintain vehicles in a safe and serviceable condition throughout their lifecycle. Position Type/Expected Hours of Work: • This is a full-time position Travel Requirements: 0-2% (May be required to travel on occasion for training) Company Information Work Environment: • Shop may be susceptible to climate similar to outdoor weather. Frequent exposure to loud machinery, air tool operation, hammering and engine noise. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Ability to Push, Pull, or Lift up to 75lbs, • Able to fit into a 20” cargo trailer dome opening., • Able to meet safety standards for fall protection harness – max weight 310 (includes all PPE worn), • Use their hands to handle, control, or feel objects, tools, or controls., • Stand for long periods of time., • Bend or twist their body., • Repeat the same movements., • Kneel, stoop, crouch, or crawl., • Walk or for long periods of time., • Make quick, precise adjustments to machine controls., • Use one or two hands to grasp, move, or assemble objects., • Use fingers to grasp, move, or assemble very small objects., • Bend, stretch, twist, or reach out., • See details of objects that are less than a few feet away., • Hold the arm and hand in one position or hold the hand steady while moving the arm., • Move two or more limbs together (for example, two arms, two legs, or one leg and one arm) while remaining in place., • React quickly using hands, fingers, or feet., • Use muscles to lift, push, pull, or carry heavy objects up to 75 lbs, • Use stomach and lower back muscles to support the body for long periods without getting tired., • See details of objects that are more than a few feet away., • See differences between colors, shades, and brightness., • Adjust body movements or equipment controls to keep pace with speed changes of moving objects., • Hear sounds and recognize the difference between them., • Focus on one source of sound and ignore others., • Understand the speech of another person., • Speak clearly so listeners can understand., • Choose quickly and correctly among various movements when responding to different signals., • Coordinate movement of several parts of the body, such as arms and legs, while the body is moving., • Make fast, repeated movements of fingers, hands, and wrists., • Use muscles for extended periods without getting tired., • Determine the distance between objects., • Keep or regain the body's balance or stay upright when in an unstable position., • See objects in very bright or glaring light., • Determine from which direction a sound came., • Move arms and legs quickly., • While looking forward, see objects or movements that are off to the side. Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. Duties, responsibilities, and activities may change at any time with or without notice. Equal Employment Opportunities Winsome Enterprises Inc. provides equal employment opportunities to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Job DescriptionWhy This Role Matters Western Truck Exchange is hiring an experienced Diesel Mechanic to diagnose, repair, and maintain commercial trucks in our Los Angeles shop. This role is for someone who can work independently, document repairs clearly, and take pride in fixing trucks correctly the first time. We are building a stronger shop culture with professional standards, better support, clear communication, and real opportunities for technicians who want to grow their skills. What You Will Work On • Perform preventive maintenance inspections, oil changes, chassis lubrication, and related truck maintenance., • Inspect trucks for worn, damaged, unsafe, or failing components and communicate findings clearly., • Diagnose and repair diesel engines, gasoline engines when applicable, drivetrain and powertrain components, brakes, suspension, HVAC, electrical systems, hydraulic systems, air systems, instruments, gauges, and related truck systems., • Repair components such as differentials, transmissions, driveshafts, PTOs, wheel ends, turbochargers, fan clutches, injectors, fuel system components, ECMs, ECUs, and sensors., • Use diagnostic tools, service information, scan data, and shop support to confirm faults before replacing parts., • Road test vehicles as needed to confirm concerns and verify completed repairs., • Document the work performed, parts needed, findings, and repair status in a clear and accurate way., • Maintain safe work habits and keep your work area organized.What We Are Looking For, • 5+ years of practical experience in mechanical inspections, diagnostics, and repairs., • High school diploma or equivalent., • Valid driver's license; must have or be able to obtain a CDL., • Proficiency with shop tools and hand tools; ability to supply a basic set of hand tools as applicable by role/level., • Basic computer skills for maintenance systems, repair documentation, and diagnostic tools., • Reliable attendance, punctuality, and a professional approach to safety and quality., • Comfortable working in a non-climate-controlled shop environment., • Willingness to travel as needed to customer yards and training sites.Strongly Preferred, • Experience with CAT and Cummins diagnostics and repairs., • Experience with Allison transmission maintenance and rebuild-related services., • Experience working on International and Mitsubishi Fuso medium-duty platforms., • Experience using diagnostic software and electronic service information., • Vocational, technical, or OEM certifications.What You Get in Return, • Opportunity to earn $100,000+ annually with a competitive wage system., • Profit sharing plan., • Quarterly incentive opportunities through our Rapid Improvement Plan., • Paid training., • Employee referral bonus., • CDL reimbursement support., • Uniform allowance., • Employee discount and paid time off., • A certified repair environment for CAT and Cummins repairs and Allison maintenance/rebuild services.What To Expect During Hiring, • Complete and submit an application., • Participate in interviews to confirm fit both ways., • Complete background check and drug screening requirements., • Selected candidates may receive a brief technical follow-up questionnaire to indicate proficiency across key systems and repairs.About Western Truck Exchange Western Truck Exchange is the leading retailer of used and new medium-duty commercial trucks in Los Angeles. Established in 1922, we are one of California's oldest licensed dealerships and an authorized International dealer. Our Los Angeles dealership includes a commercial truck repair facility that supports fleets, municipalities, contractors, and local businesses that rely on their trucks every day. We are fully certified for CAT and Cummins repairs and qualified to provide Allison maintenance and rebuild services. We believe our people are the driving force that keeps our customers and the transportation industry moving forward. We foster a culture of respect, appreciation, and opportunity, recognizing every employee's contribution to our shared success. We are an equal opportunity employer and prohibit discrimination/harassment in accordance with applicable laws.

Job DescriptionPDS Tech Commercial Inc, is seeking candidates for an Assembly Mechanic position in Torrance, CA! Are you a skilled mechanical technician ready to make a real impact in a dynamic environment? PDS Tech Commercial is looking for a Mechanical Equipment Technician to join our team. In this critical role, you'll help maintain, test, and repair mechanical equipment and machinery, ensuring operations run smoothly and efficiently. If you're ready to bring your expertise to a rewarding and fast-paced role, we want to hear from you! Role Overview: As a Assembly Mechanic you'll be responsible for constructing, maintaining, and testing mechanical equipment, machinery, and components. You will identify parts in need of replacement and coordinate orders for necessary parts. With an opportunity to develop your skills through formal training and hands-on experience, you'll make a valuable contribution to our team’s success. Key Responsibilities: • Maintenance & Testing: Construct, maintain, and test mechanical equipment, machinery, and components to ensure they meet performance standards., • Parts Identification: Identify parts that need replacement and order necessary components to minimize downtime., • Collaboration: Work closely with team members and supervisors to address equipment issues and ensure smooth operation., • Training: Participate in apprenticeship programs or formal training to enhance technical skills in your area of expertise., • Compliance & Safety: Follow pre-established guidelines and adhere to safety procedures to minimize risks and ensure a safe working environment., • Lifting & Physical Requirements: Be prepared to lift items exceeding 30 lbs. and handle significant physical tasks related to equipment maintenance.Required Qualifications:, • 2-4 years of experience in mechanical maintenance, repair, or a related field., • Knowledge of commonly-used mechanical concepts, practices, and procedures., • Ability to follow instructions and work with pre-established guidelines., • Comfortable working under immediate supervision and reporting to a supervisor or manager., • Physical ability to lift over 30 lbs. and perform repetitive physical tasks., • Willingness to work in an environment with potential exposure to machine, chemical, biological, or other physical risks.Special Considerations:, • Ability to lift over 30 lbs regularly and perform repetitive lifting tasks., • Exposure to potential machine, chemical, biological, or other physical risks.Why Join Us? At PDS Tech Commercial, we’re dedicated to creating a work environment that fosters growth, safety, and teamwork. As part of our team, you’ll have access to a range of benefits, including a competitive pay rate, training opportunities, and a supportive, dynamic work culture. Perks & Benefits: • Pay rate: $26/hr., • Subco Bonus Program: Earn up to $3k in bonuses!, • $1k at 14 days with perfect attendance., • $1k at 60 days (provided the 14-day bonus was received)., • $1k at 90 days (contingent on 14-day bonus)., • Opportunity for growth and skill development through apprenticeship and formal training.Ready to Get Started? If you're ready to take the next step in your career and join a company that values your skills and development, apply now! Become a key player in ensuring the mechanical systems that drive our operations run smoothly and efficiently. This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. Pay Details: $26.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.pdstech.com/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description SUMMARY: This position is primarily responsible for performing preventative and corrective maintenance, as directed by the Truck Shop foreman, on vehicles ranging from autos and pickups through class 8 trucks and trailers, knuckle-boom cranes, forklifts, small motor driven equipment and other rental equipment. While assuring shop and field work compliance with all regulatory standards, the Truck Shop mechanic is also responsible for maintaining equipment operation by completing inspections and preventive maintenance requirements, correcting vehicle deficiencies and by making adjustments and alignments. DUTIES AND RESPONSIBILITIES: • Follow all company and truck shop safety rules., • Participate in safety meetings and branch audits., • Promote and actively participate in the company Health and Environmental, Safety and Security Programs., • Maintain equipment operation by completing inspections and preventive maintenance requirements, correcting vehicle deficiencies and by making adjustments and alignments., • Determine vehicle condition by conducting inspections and diagnostic tests, identifying worn and damaged parts., • Keep equipment available for use by completing preventive maintenance schedules, and by performing corrective maintenance as required by work order priorities., • Correct vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems, such as, power and drive trains, electrical, air conditioning, fuel, emission, brake, steering, hydraulics and suspensions. Verify vehicle performance by conducting test drives; adjusting controls and systems., • Comply with federal and state vehicle requirements by testing engine, safety, and combustion control standards., • Maintain vehicle appearance by cleaning, washing, and painting., • Maintain vehicle records by recording services and repairs on work orders and by notifying the shop foreman of repair requirements., • Keep shop equipment in safe operating condition by following operating instructions, troubleshooting breakdowns, maintaining supplies and performing preventive maintenance., • Update job knowledge by participating in educational opportunities and reading technical and regulation publications. SUPERVISORY RESPONSIBILITIES: • This job has no supervisory responsibilities. QUALIFICATIONS: • High school degree, diploma or a GED equivalent qualification from an accredited institution., • Bachelor's degree or an associate's degree or diploma in mechanical or automotive engineering or any other related field of study, with 2 - 3 years of experience of working as a fleet mechanic., • Certificates, licenses and registrations required:, • Must possess a valid and clean commercial Class A Driver's License issued by the Department of Motor Vehicles., • Knowledge of engines, transmissions and controls, • Knowledge of brakes and suspensions, • Skilled in diagnosis and repair of electrical systems on trucks and equipment, • Skilled in DOT inspections, • Other skills required:, • Strong interpersonal, verbal, and written communication skills, • Demonstrated ability to anticipate and solve practical problems COMPETENCIES: • Ethics - Treats people with respect; Keeps commitments; Inspires the trust of others; Works with integrity and ethically; Upholds organizational values., • Attendance/Punctuality - Is consistently at work and on time; Ensures work responsibilities are covered when absent; Arrives at meetings and appointments on time., • Technical Skills - Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Judgement - Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. PHYSICAL DEMANDS AND WORK ENVIRONMENT: • Frequently required to stand, • Occasionally required to walk, • Frequently required to sit, • Continually required to utilize hand and finger dexterity, • Occasionally required to climb, balance, bend, stoop, kneel or crawl, • Continually required to talk or hear, • Continually works near moving mechanical parts, • Occasionally works in high, precarious places, • Continually exposed to outside weather conditions, • While performing the duties of this job, the noise level in the work environment is usually moderate., • Be physically able to routinely lift 70 pounds but are expected to not lift anything over 50 pounds on a recurring basis., • Specific vision abilities required by this job include: Close vision; Distance vision; Color vision; Peripheral vision; Depth perception and ability to adjust focus, • The employee must frequently wear Trench Shoring Company mandated safety equipment (including but not limited to high-visibility vest, hard helmet, approved safety glasses and safety-toe boots)., • The position is a safety sensitive position The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description MCI is North America’s leader in motor coaches for both the public and private markets. We are seeking a skilled and reliable Heavy Duty Bus and Coach Mechanic to join our team in maintaining and repairing our diverse fleet. Are you a seasoned mechanic with a passion for both traditional and emerging vehicle technologies? In this hands-on role, you will be responsible for performing diagnostics, repairs, and preventive maintenance to ensure our vehicles—from diesel-powered buses to electric drivetrains—are safe, efficient, and ready for service. Your expertise will be key in keeping our fleet operating at peak performance. What You Will Do: • Diagnosing and Repairing Diesel Engines: Apply your expertise to troubleshoot and repair diesel engines. Perform both minor and major overhauls to keep our engines running efficiently., • Drive Line Component Maintenance: Remove, repair, and replace crucial drive line components such as transmissions, drive shafts, and differentials., • Engine and Body Accessory Repairs: Maintain and repair essential engine and body accessories, including heating and air conditioning systems, alternators, generators, voltage regulators, and suspension components., • Braking System Inspection: Conduct thorough inspections and repairs of braking systems to maintain the safety and effectiveness of our fleet., • Electrical Systems Troubleshooting: Diagnose and repair electrical systems and components, ensuring all systems function correctly and efficiently., • Seating, Steering, and Glass Installations: Assisting to perform installations and repairs of seating, steering components, and glass, ensuring comfort and functionality for passengers., • Electric Bus Maintenance: Work on electric buses, including maintaining and inspecting high-voltage systems, battery packs, and electric drivetrains. What You Need to Be Successful: • Technical Expertise: Experience with diesel engines, driveline components, and electrical systems. Familiarity with electric vehicle maintenance is a plus., • Tool Proficiency: Proficiency with diagnostic devices (e.g., DDEC and ATEC readers), A/C recovery and charging equipment, and shop tools (e.g., hydraulic presses, pullers, manometers, tachometers, decelerometers, VOA instruments, dial indicators, micrometers, reamers, hones, vacuum and compression pumps, brake lathes, and other power tools) is highly valued., • Certification: Additional certifications related to electric vehicles or advanced diagnostics are beneficial but not required, • Experience in Fabrication and Machining (Optional): Skills in welding, machining, or fabrication are a plus. Including the ability to utilize these skills to address unique repair needs and contribute to custom modifications as required., • Safety and Precision: Strong understanding of safety practices and effective use of personal protective equipment., • Team Collaboration: Ability to work independently and as part of a team. Strong communication and organizational skills. Why Join Our Team: • Benefits starting day one of employment!, • Competitive Wages, • Comprehensive Benefits Package: Eligible for benefits on the first day of employment, including:, • 401(k) with employer match, • Health, dental, and vision coverage, • Basic dental option with a $0 paycheck contribution available, • Vision plan with $0 paycheck contribution, • Company Paid HSA (Health Savings Account) Contribution when enrolled in the High Deductible medical plan with HSA., • Healthcare and Dependent Care Flexible Spending Accounts (FSA) available, • Company-paid Basic Life, AD&D, and short-term disability insurance, • Employee Assistance Program, • Voluntary benefits including critical illness, hospital indemnity, and accident insurance., • Paid holidays, • Paid time off, • Modern Work Environment: Work in clean, state-of-the-art facilities with the latest tools and technologies., • Career Growth: Ongoing training and development through a variety of initiatives, with tuition subsidies for external courses to support your professional advancement. Hourly Rate: $38 - $42 OUR WHY: We exist to move people. Our mission is to design and deliver exceptional transportation solutions that are safe, accessible, efficient and reliable. NFI Group is a leading independent global bus manufacturer providing a comprehensive suite of mass transportation solutions. News and information is available at www.nfigroup.com, www.newflyer.com, www.mcicoach.com, www.nfi.parts, www.alexander-dennis.com, www.arbocsv.com, and www.carfaircomposites.com.

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Benefits: We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Mission Statement The Salvation Army, an international movement, is an evangelical part of the universal Christian church. Its message is based on the Bible. Its ministry is motivated by the love of God. Its mission is to preach the gospel of Jesus Christ and to meet human needs in His name without discrimination. Position Summary The Veteran Engagement Case Manager (VECM) in the Community Integrated Services (CIS) for the SSVF Program works as part of a multi-disciplinary team serving clients in the community. The VSW will provide transitional support and case management services to participants enrolled in the SSVF Program, which would include, but not be limited to, the following activities: Essential Functions • Conduct street outreach and participate Collaborative Outreach with other homeless providers to designated “Hot Spots”, • Primarily coordinate extensive outreach in Service Planning Area 2 (SFV), 5 (West LA), 6 (South LA) and 7 (Cerritos, Bellflower). Outreach will also be required to provide Outreach assistance outside the coverage areas for Outreach events (e.g., VA Stand down, LA Collaborative Outreach, Community Outreach, Veteran’s events), • Attend Collaborative Homeless Case Conference meetings, Program Meetings, CES Meetings, and “By Name List” based on the designated sites (SPA 2, 5, 6, 7)., • Conduct screening tools to assess and identify housing barriers and services required (VI-SPDAT)., • Conduct pre-screening to determine SSVF Eligibility, • Conduct intake, needs assessments for program participants and develop clearly written individualized service plans., • Conduct research, outreach, and build relations with landlords to build a pool of landlords and property management companies willing to rent to program participants., • Help program participants identify potential neighborhoods where they wish to live, conduct housing searches in said areas and negotiate with potential landlords on behalf of the participants., • Establish and maintain relationships with landlords, property management companies., • Assist in the processing and submission of applications for housing (subsidized and unsubsidized)., • Conduct inspections of potential permanent housing units where program participants will reside., • Provide tenant education: tenant rights and responsibilities, housing discrimination and communication with landlords., • Maintain a regular and open line of communication with landlords in-order to assess the landlords’ satisfaction with the programs and address any questions or concerns that landlords may have., • Provide case management services which include but are not limited to the following activities: Budget plan, Housing Plan, providing appropriate resources, tools, and counseling to assist participants in achieving their case plan goals; making referrals for services and following up to ensure that the referrals were completed; and tracking and documenting participant progress., • Work collaboratively with housing relocation specialist to assist participants as needed while they prepare to move into permanent housing. Such assistance may include accessing move-in assistance, coordinating donated furnishings and other basic household items., • Work collaboratively with vocational specialist to assist participants in accessing employment and training opportunities., • Conduct internal referrals to the SSVF Shallow Subsidy and Homeless Veteran Re-entry Program (HVRP) to maximize Housing sustainability, • Deliver home-based case management services to participants once they move into permanent housing., • Conduct home visits to all veterans who are due for a 90-day program recertification. Evaluate current services and identify and refer the veteran to NEW services (i.e., Hoarding Therapy, Home nurse) if found that such services are needed., • Document and maintain up-to-date information on services provided to clients in the Homeless Management Information System (HMIS), • Participate in Bi-weekly case management meetings and attend staff trainings as required., • Prepare and submit case and program reports as needed., • May transport/accompany clients to appointments and self-help activities as needed, • Provides crisis intervention as needed, • Attend regular staff meetings and trainings as assigned by the Program Manager, • Rotates with the multi-disciplinary team for on-call duties, • Responsible to maintain all vehicles assigned to the SSVF program by conducting weekly engine runs., • Responsible to maintain all vehicles assigned to the SSVF program by driving the vehicle for no less than 2 miles on a weekly basis., • Respond to complaints from landlords & participants related to housing conditions & provide mediation as needed., • Report to the SSVF Program Manager when Maintenance to the vehicle is required., • Coordinate all maintenance issues with the local mechanic establishment (e.g., oil change, battery, tire, check engine light), • Adopts an “whatever-it-takes” approach in assisting clients to retain housing and independent living, • Other duties as assigned Working Conditions Most of the direct service work is performed in the community (e.g., clients’ homes) and NOT at the assigned site. Thus, the VSW must have the ability to walk, stand, bend, squat, climb, kneel, and twist on an intermittent or sometimes continuous basis, the ability to grasp, push, pull objects such as files, file cabinet drawers, and reach overhead; ability to operate computer, fax, and telephone; and the ability to lift to 25 lbs. Minimum Qualifications • Bachelor’s degree in social work or a related field or 3 years of Homeless Services experience, • Excellent communication skills, • Must obtain First Aid/CPR certification in first 90 days of employment, • A valid California Class C Driver License or the ability to utilize an alternative method of transportation when needed to carry out job-related essential functions Skills, Knowledge & Abilities • Commitment to the holistic mission of The Salvation Army, • Able to represent the Salvation Army to community organizations, • Commitment to working with disabled veterans, • Veteran status a plus, • Ability to work well with others and committed to the vision that Community Integrated Services be a program of excellence, • Ability to build a NETWORK of community providers that can help with the transition of homelessness to Permanent Housing.

Job Description Position Summary The Veteran Engagement Case Manager (VECM) in the Community Integrated Services (CIS) for the SSVF Program works as part of a multi-disciplinary team serving clients in the community. The VSW will provide transitional support and case management services to participants enrolled in the SSVF Program, which would include, but not be limited to, the following activities: Essential Functions • Conduct street outreach and participate Collaborative Outreach with other homeless providers to designated “Hot Spots”, • Primarily coordinate extensive outreach in Santa Barbara and Ventura County. The position will require Outreach assistance outside the coverage areas for Homeless events (e.g., VA Stand down, Collaborative Outreach, Community Outreach, Veteran’s events), • Must be able to travel across Santa Barbara County, Ventura County, and Los Angeles., • Attend Collaborative Homeless Case Conference meetings, Program Meetings, CES Meetings, and “By Name List” based on the designated sites., • Conduct screening tools to assess and identify housing barriers and services required (VI-SPDAT)., • Conduct screenings to determine SSVF Eligibility, • Conduct intake, needs assessments for program participants and develop clearly written individualized service plans., • Conduct research, outreach, and build relations with landlords to build a pool of landlords and property management companies willing to rent to program participants., • Help program participants identify potential neighborhoods where they wish to live, conduct housing searches in said areas and negotiate with potential landlords on behalf of the participants., • Establish and maintain relationships with landlords, property management companies., • Assist in the processing and submission of applications for housing (subsidized and unsubsidized)., • Conduct inspections of potential permanent housing units where program participants will reside. Provide tenant education: tenant rights and responsibilities, housing discrimination and communication with landlords., • Maintain a regular and open line of communication with landlords in-order to assess the landlords’ satisfaction with the programs and address any questions or concerns that landlords may have., • Provide case management services which include but are not limited to the following activities: Budget plan, Housing Plan, providing appropriate resources, tools, and counseling to assist participants in achieving their case plan goals; making referrals for services and following up to ensure that the referrals were completed; and tracking and documenting participant progress., • Work collaboratively with housing relocation specialist to assist participants as needed while they prepare to move into permanent housing. Such assistance may include accessing move-in assistance, coordinating donated furnishings and other basic household items., • Work collaboratively with vocational specialist to assist participants in accessing employment and training opportunities., • Conduct internal referrals to the SSVF Shallow Subsidy and Homeless Veteran Re-entry Program (HVRP) to maximize Housing sustainability, • Deliver home-based case management services to participants once they move into permanent housing., • Conduct home visits to all veterans who are due for a 90-day program recertification. Evaluate current services and identify and refer the veteran to NEW services (i.e., Hoarding Therapy, Home nurse) if found that such services are needed., • Document and maintain up-to-date information on services provided to clients in the Homeless Management Information System (HMIS), • Participate in Bi-weekly case management meetings and attend staff trainings as required., • Prepare and submit case and program reports as needed., • May transport/accompany clients to appointments and self-help activities as needed, • Provides crisis intervention as needed, • Attend regular staff meetings and trainings as assigned by the Program Manager, • Rotates with the multi-disciplinary team for on-call duties, • Responsible to maintain all vehicles assigned to the SSVF program by conducting weekly engine runs., • Responsible to maintain all vehicles assigned to the SSVF program by driving the vehicle for no less thanH2Rm05i-l0e3s on a weekly basis., • Respond to complaints from landlords & participants related to housing conditions & provide mediation as needed., • Report to the SSVF Program Manager when Maintenance to the vehicle is required., • Coordinate all maintenance issues with the local mechanic establishment (e.g., oil change, battery, tire, check engine light), • Adopts an “Above and Beyond” approach in assisting clients to retain housing and independent living, • Other duties as assigned Working Conditions Most of the direct service work is performed in the community (e.g., clients’ homes) and at the assigned site. Thus, the VECM must have the ability to walk, stand, bend, squat, climb, kneel, and twist on an intermittent or sometimes continuous basis, the ability to grasp, push, pull objects such as files, file cabinet drawers, and reach overhead; ability to operate computer, fax, and telephone; and the ability to lift to 25 lbs. Minimum Qualifications • Bachelor’s degree in social work or a related field or equivalent job experience working in homeless, mental health or social services., • Excellent communication skills, • Must obtain First Aid/CPR certification in first 90 days of employment, • A valid California Class C Driver License is required. License is required withing 90 days of hire for Out of State license., • Must have a reliable, registered and insured vehicle. Skills, Knowledge & Abilities • Commitment to the holistic mission of The Salvation Army, • Proficient in Microsoft Office (e.g., Word, Excel) and Adobe., • Able to represent the Salvation Army to community organizations, • Commitment to working with disabled veterans, • Veteran status a plus, • Ability to work well with others and committed to the vision that Community Integrated Services be a program of excellence, • Ability to build a NETWORK of community providers that can help with the transition of homelessness to Permanent Housing.

Job Description Job Title: Mechanic Company: Alvand Transportation Location: Sun Valley, CA Job Type: Full-time About Us: Alvand Transportation is recognized as the fastest growing and most professional transportation company in Southern California. We are currently seeking a responsible, dedicated, and proactive individual to join our team as a Mechanic. Job Summary: The Mechanic is responsible for the inspection, maintenance, repair, and overall upkeep of the company’s vehicles and equipment to ensure they are safe, functional, and in compliance with company and regulatory standards. This role requires technical expertise, a strong attention to detail, and a commitment to maintaining the reliability of the fleet. Key Responsibilities: • Perform routine inspections and preventive maintenance on buses, trucks, and other company vehicles, including oil changes, tire rotations, and brake checks., • Diagnose mechanical, electrical, and hydraulic issues and execute repairs promptly., • Conduct thorough inspections of vehicles for safety and regulatory compliance., • Replace or repair parts, including engines, transmissions, steering systems, or electrical components as necessary., • Keep detailed and accurate maintenance records, ensuring compliance with federal, state, and company regulations., • Operate diagnostic tools and software to identify and resolve mechanical problems., • Respond to on-road breakdowns, performing emergency repairs when required., • Collaborate with the Fleet Operations Administrator to prioritize repairs and manage the maintenance schedule effectively., • Maintain an organized, safe, and clean workspace, adhering to all workplace safety protocols., • Assist with ordering and maintaining inventory of spare parts and tools., • Provide recommendations on improvements to fleet maintenance processes and systems., • Train and mentor junior staff or apprentices, as needed., • Perform other related duties as assigned by management. Qualifications: • High school diploma or equivalent; technical training or certification in vehicle repair preferred., • Minimum of 3-5 years of experience as a mechanic, preferably working with buses or commercial vehicles., • Valid driver’s license; a commercial driver’s license (CDL) is a plus., • Proficient in using diagnostic tools, repair manuals, and electronic service systems., • Strong knowledge of mechanical, electrical, and hydraulic systems., • Ability to lift heavy equipment and tools, up to 50 pounds., • Excellent problem-solving skills and attention to detail., • Strong communication skills and the ability to work well in a team environment., • Knowledge of OSHA and DOT safety regulations is a plus. Work Environment: The Mechanic will work primarily in a garage or outdoor environment, which may include exposure to loud noises, machinery, and varying weather conditions. This role may require occasional on-call hours, including evenings and weekends, to respond to emergencies. Physical Requirements: • Ability to stand, walk, and work in confined spaces for extended periods., • Manual dexterity to operate tools and machinery. Salary: $32-37 per hour, based on experience and qualifications. Benefits: • 401(k) retirement plan., • Flexible schedule to accommodate work-life balance., • Comprehensive health insurance coverage., • Paid training programs to enhance your skills., • Paid time off for vacation, sick leave, and holidays. Schedule: • All shifts available, including weekends and holidays., • Part-time opportunities specifically available for weekends, summer, and holidays. Join Alvand Transportation and be a part of a dynamic team that values professionalism and dedication. If you meet the above requirements and are ready to contribute to our success, we encourage you to apply. To Apply: Click the link to apply and submit your resume and cover letter. Alvand Transportation is an Equal Opportunity Employer. Alvand Transportation does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor. By joining Alvand Transportation, you’ll be part of a company that prioritizes safety, customer service, and employee satisfaction. We look forward to welcoming you to our team!

Job DescriptionPosition Overview We are seeking a highly skilled Electro-Mechanical Technician with experience in food or beverage manufacturing to support production operations. This is a more advanced role than a traditional maintenance mechanic, requiring strong expertise in electrical systems, PLC troubleshooting, and automated equipment. This position is responsible for maintaining, troubleshooting, and repairing complex production equipment to ensure optimal performance and minimal downtime. The ideal candidate has a strong background in both electrical and mechanical systems, can read and interpret schematics, and is comfortable working in a fast-paced, regulated manufacturing environment. Candidates will be tested on their electrical knowledge and troubleshooting abilities as part of the hiring process. Key Responsibilities • Troubleshoot and repair electrical, mechanical, PLC-controlled, hydraulic, and pneumatic systems on production equipment., • Diagnose and resolve issues related to PLCs, sensors, motors, drives, and control systems., • Read and interpret electrical schematics, wiring diagrams, blueprints, and technical manuals., • Perform preventive, predictive, and corrective maintenance on processing and packaging equipment including conveyors, mixers, ovens, fillers, and automated systems., • Work with 480V and lower voltage electrical systems, ensuring safe troubleshooting and repairs., • Support installation, setup, and commissioning of new equipment and system upgrades., • Collaborate with production and engineering teams to identify root causes of equipment failures and implement long-term solutions., • Utilize diagnostic tools such as multimeters, megohmmeters, and other electrical testing equipment., • Maintain accurate maintenance records in CMMS, documenting repairs, parts used, and work performed., • Ensure all work complies with GMP (Good Manufacturing Practices), food safety standards, and plant safety policies., • Assist in training operators and junior technicians on equipment troubleshooting and basic maintenance practices., • Work efficiently in cold or refrigerated environments as required.Qualifications, • 6+ years of experience in electro-mechanical maintenance within food or beverage manufacturing., • Strong experience troubleshooting PLCs (Allen-Bradley, Siemens, or similar systems)., • Advanced knowledge of electrical systems, controls, motors, drives, and automation equipment., • Ability to read and interpret electrical schematics, wiring diagrams, and technical documentation., • Experience working with high-voltage systems (480V preferred)., • Strong mechanical aptitude with knowledge of hydraulics, pneumatics, bearings, gearboxes, and conveyors., • Experience with automated production and packaging equipment., • Familiarity with CMMS systems and preventive maintenance programs., • Strong problem-solving skills and the ability to work independently in a fast-paced environment., • Willingness to work various shifts, weekends, and overtime as needed.Preferred Qualifications, • Experience with VFDs, servo motors, and industrial automation systems., • Certification or technical training in electrical or industrial maintenance., • Experience in high-speed food production or packaging environments., • Welding, fabrication, or additional technical skills are a plus.Physical & Work Environment Requirements, • Ability to work in refrigerated or cold storage environments for extended periods., • Regularly required to stand, walk, bend, reach, and lift up to 50 lbs., • Exposure to wet, noisy, and fast-paced production environments., • Must follow all safety protocols, PPE requirements, and food safety standards.

Job Description About Kooner Fleet Management Solutions Kooner Fleet Management Solutions is one of the fastest-growing national providers of on-site fleet maintenance, preventative service, and mobile repair solutions. With nearly a decade of industry experience, Kooner FMS helps fleets reduce downtime, extend vehicle life, and simplify operations through proactive maintenance programs and advanced technology. As a family-founded and field-first company, we take pride in delivering trusted partnerships, exceptional service, and innovative fleet management solutions that keep America’s trucks and trailers road-ready. Why You’ll Love Joining Our Team • Earn What You Deserve: Competitive pay starting at $32-35/hr. based on experience., • Weekly Paydays: Get paid every Friday – no waiting around!, • Stay Connected: Cell phone allowance included., • Invest in Your Future: 401(k) with company match., • Health Benefits that Kick in Fast: Medical, Dental, and Vision coverage after just 30 Days!, • Time to Recharge: Enjoy paid vacation time, paid sick time, and paid holidays to rest, recharge, and take care of what matters most., • We’ve Got You Covered: Life & Disability Insurance for added peace of mind – because we take care of our team on and off the job., • We’re Here for You: Access to our Employee Assistance Program for support when you need it most – we've got your back., • Bring a Friend, Get Rewarded: Refer great talent and earn $500 per successful hire – no limits on how many bonuses you can earn!, • Grow With Us: Big Career Growth Opportunities in a rapidly expanding, forward-thinking organization. About the Trailer Mechanic/Technician Role As a Trailer Mechanic/Technician, you’ll be the expert our customers rely on to keep their fleets on the road. This field-based role is perfect for skilled technicians who enjoy independence and variety in their work. You’ll be responsible for performing preventative maintenance, diagnostics, and repairs on Commercial trailers. Backed by a supportive team that values your skill, drive and dedication, you’ll tackle new challenges every day and take pride in delivering safe, reliable and efficient service that keeps America moving. Where You’ll Make an Impact • Perform onsite preventative maintenance, DOT inspections and follow up repairs on Commercial trailers in a field environment., • Respond to dispatch requests for scheduled and unscheduled service or maintenance., • Diagnose and repair electrical, brake, suspension and air systems – keeping trailers safe, compliant, and road-ready., • Repair structural and exterior components such as corner nose rails, corner radius, wheel seals, bottom skirts, panels, doors, and top rails., • Put your expertise to work using hand tools, power tools, and welding equipment to get the job done right., • Stay productive and efficient, meeting or beating industry-standard repair times., • Jump in wherever needed – we're a team that supports each other. What Makes You a Great Fit • At least 3 years of hands-on trailer tech experience working on Commercial trailers., • DOT inspection and air brake repair expertise that keeps fleets rolling safely., • Strong communication skills – you know how to connect and communicate with customers and drivers alike., • Comfortable using mobile apps, navigation systems and digital tools to stay organized and document repairs., • Ready for the outdoors – rain or shine at customer yards., • Independent, dependable, and self-motivated – you take pride in getting the job done right., • A positive attitude and safety-first mindset., • Must be 23+ with a clean driving record and a valid driver’s license., • Bring your own hand tools and we’ll supply everything else. Work Environment • Work in dynamic, high-traffic areas – safety and precision are key., • Expect exposure to dust, diesel fumes, and noise typical of a shop or yard environment., • Safely handle chemicals, oils, and grease as part of repair work., • Be ready to lift, move, and position heavy equipment or components., • Stay active – you'll bend, kneel, crawl, and crouch to access vehicle components., • Work outdoors in all weather conditions – rain or shine, our team gets it done. Kooner Fleet Management Solutions is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants, free from discrimination and harassment. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. We celebrate diversity and are dedicated to fostering a workplace where every team member can thrive. Kooner Fleet Management Solutions participates in E-Verify for employment eligibility verification. #KFMS1

Job Description Overview Amerit Fleet Solutions, one of the leading fleet maintenance companies in the US, is looking to hire a skilled Fleet Maintenance Manager. The Fleet Manager is responsible for leading a team of Technicians and Mechanics in an aggressive quality preventative maintenance repair program, including the maintenance of light and medium to large/heavy duty vehicles, and other equipment to ensure a safe and efficient fleet. Compensation: $95,000 to $105,000/yr. based on experience plus additional annual bonus incentives Schedule: Shift: Sunday-wed or Wed-Sat hours 11AM to 9pm The benefits of belonging – what’s in it for you? • Full benefits within 30 days, • Medical, dental, vision, prescription drug coverage, life insurance, disability insurance, • 401(k) Match program, • Paid vacation, holidays, and sick time, • Commitment to your safety through boot and prescription safety glasses reimbursement, • Career and learning development with an extensive training program through our Amerit University, • Employee referral program, up to $1,000 bonus, • ASE certification program with fee reimbursement and bonus, • Employee recognition platform that includes opportunities to redeem points for merchandise, • Employee Assistance Program (EAP), • 24/7 nurse triage line, • Employee discounts on cell phone service and entertainment tickets, • Employee resource groups (ERGs) that foster inclusion What the Fleet Manager role looks like: • Manage daily fleet maintenance and repair operations, ensuring minimal downtime, • Oversee a high volume of repair orders and prioritize workflow for maximum efficiency, • Supervise shop operations and/or maintenance staff as applicable, • Ensure preventative maintenance schedules are followed and documented, • Manage parts and inventory, including ordering, tracking, and cost control, • Review repair estimates, invoices, and warranty claims for accuracy, • Coordinate with clients, dealerships, and vendor service providers to ensure quality work, • Ensure compliance with safety regulations, DOT requirements, and company policies, • Analyze maintenance data and recommend improvements to operation What our ideal candidate looks like: • Required Qualifications, • Minimum 5 years of fleet management or shop management experience, • Strong technical/mechanical background (hands-on experience preferred), • Proven history of managing high-volume repair orders, • Demonstrated experience with inventory and parts management, • Strong organizational, leadership, and problem-solving skills, • Preferred Qualifications, • Experience with fleet management software or CMMS systems, • Knowledge of DOT compliance and safety standards Working Conditions: • Exposure to heavy traffic areas while performing the duties of the job., • Exposure to considerable amounts of dust, diesel fumes and noise., • Exposure to chemicals, oils, greases or other irritants., • Ability to move and position heavy objects, • Ability to bend, stoop, crouch, kneel and crawl to repair vehicles, • Ability to work outside in various weather conditions. Are you ready to advance your career as a Fleet Manager with Amerit Fleet Solutions? Apply Today! https://www.ameritfleetsolutions.com/careers/easy-apply #Mechanic #Hiring #FleetManager #NowHiring #AutomotiveCareer #MechanicJobs #FleetManagement #FleetMaintenance INDAM

Job Description Industrial Maintenance Company 1231 East G Street. Wilmington, CA. 90744 Equipment Mechanic Position This recruitment is to fill one (1) full-time vacancies. Industrial Maintenance is looking for a highly skilled and motivated Automotive/Diesel Mechanic to join our team. Industrial Maintenance prides itself in providing great work results.. We offer a full benefits package and pay commensurate with experience. Candidates must be able to perform skilled and specialized automotive, diesel, compressed natural gas (CNG) and hydraulic systems repair work. Job Description Under general supervision, performs a variety of general, skilled or semi-skilled duties in the servicing, repair, and adjustment of automobiles, trucks, construction equipment, forklifts and other related specialized equipment powered by gasoline, diesel fuel, and compressed natural gas (CNG); and does related work as assigned. Duties/Responsibilities Class Characteristics: Automotive Mechanics perform journey level mechanic work and are expected to perform assigned activities without detailed instruction as to specific procedures to be followed. Essential Functions: • Examine and locate mechanical defects in a wide variety of vehicles and construction equipment, forklifts; diagnose, troubleshoot, and determine the extent of necessary repairs., • Perform major mechanical repairs; disassemble, repair, and replace worn parts; fit new parts, and adjust hydraulic, water and fuel pumps, carburetors and fuel injectors, governors, starting motors, clutches, differentials, brakes, and steering gear., • Tune up engines; take compression tests; repair standard and electronic ignition systems and adjust timing and valves; replace or adjust emission control systems; and install new or rebuilt engines., • Overhaul hydraulic, booster, and vacuum systems; and rewire and recondition electrical systems., • Service, repair, small gasoline engines, pumps, and miscellaneous equipment and tools. · Keep records of time, materials, parts, and work performed. • Interact with co-workers at all levels in the organization in a collaborative and customer service-oriented manner., • Maintain prompt and regular attendance. Qualifications Any combination of education and experience that provides the required knowledge, skills, and abilities to perform the essential job duties of the position. Knowledge of: · Techniques and methods of overhauling and repairing gasoline and diesel-powered equipment and related components, including engines, carburetors, and electrical systems. · Theory, care, and operation of gasoline and diesel-powered internal combustion engines and mechanical components for the maintenance and repair of mechanical equipment. · Methods, materials, tools, and equipment of the trade and their use in the maintenance and repair of mechanical equipment. · Preventive maintenance inspection methods. Ability to: · Understand and follow verbal and written directions. · Prepare simple records such as completing work orders. · Work safely and efficiently. · Deal tactfully and courteously with internal and external customers. Education: · High School Diploma or G.E.D. (required). Experience: · Three years of experience as an automotive, truck or equipment mechanic. Licenses/Certifications: • Possess and maintain a valid Class A California Driver’s License and a satisfactory driving record., • Possession of an Automotive Service Excellence (ASE) Certification (desirable). Training/Safety Requirements: • This position is subject to pre-employment and random drug and alcohol testing. Special Requirements • Possess a valid California Driver's License and a satisfactory driving record. DMV printout required prior to employment., • The Equipment Mechanic must provide his/her own journeyman set of hand tools and a tool box., • Receive satisfactory results from a background investigation, a physical examination, which includes a drug screen, and an administrative review. Physical Requirements: • Heavy Lifting: Lifting over 50 pounds, with frequent lifting, pushing, and/or carrying of objects weighing over 25 lbs., • Reaching: Reaching above the shoulders to place and/or retrieve objects., • Walking: Ability to walk for prolonged periods of time (usually a minimum of two or more hours per day), • Standing: Ability to stand with little movement for long periods of time (usually a minimum of two or more hours per day), • Agility: Ability to move quickly and easily, often including the ability to crawl, stoop or bend. Company DescriptionRobert D Whittington, Inc. dba Industrial Maintenance Company is a Fleet Maintenance and Repair Company.Robert D Whittington, Inc. dba Industrial Maintenance Company is a Fleet Maintenance and Repair Company.

Job Description Department: Maintenance Job Status: Full Time Pay Starting at $38 to $63 an Hour DOE Work Schedule: 4-10s or 5-8s Job Description: Maverick Helicopters, a part 135 tour operator Is Selecting Candidates for Full-time A&P Line Mechanic position based in Long Beach, CA. Successful candidates will be expected to perform all facets of daily scheduled and unscheduled maintenance on company fleet. They will be troubleshooting airframe, engine and electrical system: replacing engines, transmissions and other components as necessary. Other duties as assigned by supervisor. Some overtime may be required. • Experience maintaining Airbus EC130 and/or S76 helicopters is preferred., • A good working knowledge of helicopter airframes and engines, as well as advance troubleshooting skills, is expected. Additional skills and abilities desired: • Paint application and preparation., • Sheet metal fabrication and repair, • Carbon fiber and fiberglass composite repair Wage and benefits package are above average. It includes major medical (PPO/HSA), dental, vision, 401k (with matching), paid vacation, sick leave and available supplemental insurance. Medical premiums are supplemented for the employee. Job Requirements: • Possess a current FAA Airframe and Powerplant Certificate (A&P) with no enforcement action(s) pending., • Able to work any shift., • Professional that is able to work as a team member or independently., • Able to use calibrated, hand and specialized tools., • Abe to understand and properly use aircraft manuals., • Able to document work as per regulations in the way of maintenance entries., • Able to manage time and duties effectively., • Possess quality decision making capability and mental alertness to ensure safety., • Must be in good Physical condition. SKILLS & ABILITIES Experience : • Experience maintaining Airbus EC130 is preferred. Certificates & Licenses: • Current FAA Airframe and Powerplant Certificate (A&P)Company DescriptionAbout Maverick Helicopters Maverick’s commitment to excellence in service and tour products is a passion for every Maverick employee, and is only matched by our commitment to safety. Our team members come from a wide range of backgrounds and bring a diversity of perspectives and abilities to our family. We have established an environment where our employees ensure that our customers will enjoy a truly amazing adventure. Our VIP service, the finest equipment and the most unique tour and transportation packages make Maverick Aviation Group a leader in this unique industry.About Maverick Helicopters\r\n\r\nMaverick’s commitment to excellence in service and tour products is a passion for every Maverick employee, and is only matched by our commitment to safety. \r\n\r\nOur team members come from a wide range of backgrounds and bring a diversity of perspectives and abilities to our family. We have established an environment where our employees ensure that our customers will enjoy a truly amazing adventure. \r\n\r\nOur VIP service, the finest equipment and the most unique tour and transportation packages make Maverick Aviation Group a leader in this unique industry.

Job Description Experienced technician wanted. 8am to 5pm Mon.- Fri, Must have tools, min 5 years exp. ASE and/or Factory certifications a plus, valid CDL, ability to diagnose and repair most cars and light trucks. $22 to $56 hr., retirement, paid holidays, vacation, sick pay, medical, pet insurance, weekly training.We are also looking for a shop foreman. Our current foreman is moving out of state. Please call 818-578-5191 Company DescriptionWe are a complete automotive service center that strives to give the best possible experience to our clients daily. We begin each day with a commitment to our core values of honesty, integrity, humility. Our goal is to make our clients lives easier by providing them them the the best service we can, at a fair and reasonable price. We are committed to performing quality repairs, using the highest quality parts, in a reasonable time, at a reasonable price. We take the time to provide advanced level training for all of our staff. This assures happy clients by saving them time and money. We take the guesswork out of auto repair. A shop you will be proud to work at.We are a complete automotive service center that strives to give the best possible experience to our clients daily. We begin each day with a commitment to our core values of honesty, integrity, humility. Our goal is to make our clients lives easier by providing them them the the best service we can, at a fair and reasonable price. We are committed to performing quality repairs, using the highest quality parts, in a reasonable time, at a reasonable price. We take the time to provide advanced level training for all of our staff. This assures happy clients by saving them time and money. We take the guesswork out of auto repair. A shop you will be proud to work at.

Job Description We are looking for an Auto Mechanic to join our team! You will be responsible for repairing various vehicles. brakes, alignment, timing belts,struts ect. 1000 dollar signing bonus paid in 90 days 8 to 5 Monday thru Friday--- 1 week paid vacation. 401k 7935 Santa Monica blvd west Hollywood ca 90046 Responsibilities: • Repair automobiles, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections prior to returning the vehicle to the customer Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionWE HAVE BEEN IN HOLLYWOOD OVER 40 YEARS FAMILY OWNED AND OPERATED. PAID VACATIONWE HAVE BEEN IN HOLLYWOOD OVER 40 YEARS FAMILY OWNED AND OPERATED. PAID VACATION

Job Description For faster responses, call or text Jason at (214) 604-3951. Join our Growing team in DALLAS TX JP Euro Team – Where Passion Meets Performance! ?? ??Salary: $100,000–$160,000 (Based on Experience) Are you a seasoned BMW Master Technician Mechanic ready to take your career to the next level? JP Euro, a leading European and exotic auto repair shop, is looking for a BMW Master Technician Mechanic to join our elite team. If you specialize in BMW and are passionate about precision, thrive in a fast-paced, high-performance environment, and take pride in quality craftsmanship, this is your opportunity to shine. ?? Why Choose JP Euro? ? No Weekends, Ever! We believe in work-life balance – enjoy your time off with friends and family. ? Professional Growth Stay ahead of the curve with ongoing training on the latest BMW and European auto technology. ? Positive, Supportive Team Culture Be part of a team that values collaboration, innovation, and respect. ? Relocation Assistance Willing to move? We’ll support the right candidate with relocation help. ?? What You Bring to the Team: 6+ years of hands-on, master-level experience with BMW vehicles Strong specialization and experience with BMW vehicles Deep knowledge of diagnostics, repair, and maintenance A “fix it right the first time” mindset and strong problem-solving skills Great communication and a team-first attitude A valid driver's license and legal ability to work in the U.S. Ability to pass a background check & MVR screening ?? Your Role at JP Euro: Perform expert diagnostics and repairs with a focus on BMW vehicles Work closely with Service Advisors and Parts staff to deliver exceptional results Stay up to date with continuous training and development opportunities Keep your workspace clean, professional, and organized ?? Ready to Accelerate Your Career? If you're ready to join a team that values your skill, drive, and dedication, apply today. No weekends, strong hourly pay, and a culture that truly respects your expertise – what are you waiting for? ?? Apply Now: Visit www.JPEURO.com #hc240034

Job DescriptionYour Day, Your Impact Sun up, tools out. You arrive to a clean, well-equipped NFI shop and clock into a steady schedule our recruiters helped you choose. You scan a dedicated company trailer with JPRO and OEM diagnostic software, trace an electrical fault with a multimeter, correct a brake issue, then switch to suspension work. After lunch, you weld a small repair, rotate tires, document every step, and brief a customer on the work performed. You end the day knowing you kept our fleet safe, compliant, and moving. Why You’ll Like Wrenching Here • Competitive hourly pay ($25–$32) tied to your experience and certifications, • $2,000 sign-on bonus to welcome you aboard, • Unlimited employee referral bonus, • Reliable, consistent schedule with recruiter support to match your routine, • Work on a dedicated, well-maintained company fleet you’ll be proud of, • Health, dental, vision, and Rx coverage, • Major shop tools, safety PPE, and uniforms provided, • Boot allowance to keep you comfortable, • 401(k) with company match, • PTO accruing from day one plus eight paid holidays, • Ongoing mechanic training and career development, • ASE certification reimbursement and study support What You’ll Work On, • Routine services: oil changes, tire rotations, and inspections, • Diagnostics for trailer electrical, suspension, and brake systems using JPRO, OEM Diagnostic Software, multimeters, and Windows-based tools, • Repairs and part replacements: tires, brakes, suspension components, • Light welding and fabrication when needed, • Accurate documentation of all work performed, • Clear communication with customers about findings and repairs, • Strict adherence to safety protocols and shop guidelines What You Bring, • Valid driver’s license, • Technical or advanced degree, or 2+ years of equivalent maintenance experience, • Hands-on troubleshooting ability with JPRO, OEM Diagnostic Software, Multimeters, and Windows, • Proven problem-solving skills, • Teamwork mindset and customer service focus with strong verbal and written communication, • Completion of an on-site evaluation with recommended training Grow With a Team That Grows With You For over 90 years, NFI has been a family-owned leader in logistics. Our shop teams are the heartbeat of our operation—maintaining, diagnosing, and repairing a dedicated commercial fleet that keeps freight moving. We invest in your craft with training, tools, and recognition so you can build a long, rewarding technician career. Fuel your career—join NFI Truck Life! Call us now: 833-205-2168 Equal Opportunity and Accommodations All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws and regulations. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please let us know if you need a reasonable accommodation to apply for a job or to perform your job duties. PC 943