Trabajos part time environmental en Glendale, ArizonaCrear alertas

Clean Harbors in Phoenix, AZ is seeking a Class A CDL Driver to operate a variety of heavy and light duty trucks/work equipment at our customer sites; some of the vehicles operated include vacuum trucks, Cuscos, guzzlers, and roll offs. This role is responsible for performing driving and non-driving duties on and off customer sites associated with hazardous waste clean-up. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Why work for Clean Harbors? • Health and Safety is our #1 priority and we live it 3-6-5!, • Focus on maintaining sustainability and cleaning the Earth, • Competitive Pay, • Comprehensive health benefits coverage after 30 days of full-time employment including 401K with Company match, • Own part of the company with our Employee Stock Purchase Plan, • Opportunities for growth and development for all the stages of your career, • Company paid training and tuition reimbursement RESPONSIBILITIES Key Responsibilities: • Ensure Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and always acting in a safe manner, • Operate commercial trucks and assist field laborers when needed (team atmosphere where everyone helps), • Operate a variety of Class A trucks, • Loading and unloading of trucks, • Manual labor on site to ensure fulfillment of customer needs, • Proper placarding of vehicles to meet Company and DOT requirements/regulations, • Maintain daily logs, time sheets, and various reports, • Follow all local, state (provincial) and federal compliance regulations and rules, • Safely operate vehicles in accordance with U.S. DOT, local, state (provincial) and federal requirements, • Safely observe all corporate operating guidelines and procedures, • Observe all company environmental health and safety operating guidelines, • Performs other duties as assigned, • By position, ability to be on call for emergency response on rotating basis every other week, • Valid Class A CDL, • Ability to obtain Hazmat and Tanker endorsement within 90 days of employment, • Ability to use various mobile devices, • Perform physical functions per job requirements, • Successfully complete a background check, drug test, and physical, by position, • Per OSHA's Respiratory Protection Standard, 29 CFR 1910.34, employees in positions requiring respirators are required to meet facial hair standards. Preferred Qualifications:, • Commercial driver experience, • Hazmat and Tanker endorsement, • Previous Hazmat experience, • Ability to operate a manual transmission Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-844-922-5547. Clean Harbors is a Military & Veteran friendly company. Clean Harbors is committed to complying with applicable pay transparency laws and ensuring fair and equitable compensation. The posted salary range reflects the minimum and maximum target for this role. Final compensation may vary based on factors such as location, experience, skills, and business needs. In addition to the base salary, some roles may be eligible for bonus or incentive compensation and a comprehensive benefits package. *CH

Future Opportunity - Please submit your application to be considered for open position in the near future. What You’ll Do As a Field Service Engineer [Customer Engineer], you'll serve as Applied’s direct liaison with our customers and quickly solve high-value problems on their behalf. By collaborating closely with our customers onsite to install, maintain, and upgrade Applied Materials equipment, and with our internal teams to improve business processes, you’ll make a significant impact on ensuring peak performance and deliver exceptional service, while becoming an integral part of Applied Materials' diverse and dynamic field team. Role Responsibilities: * Install, maintain, and upgrade customer equipment * Apply basic diagnostic techniques to assess equipment and address technical issues, with assistance from Senior Field Service Engineers [Customer Engineers] * Collaborate with Senior Field Service Engineers [Customer Engineers] and/or the customer to understand roadmaps, process flows, inflection points, requirements, and business challenges * Train and mentor junior Field Service Engineers [Customer Engineers] * Perform preventative and corrective maintenance on electrical, vacuum, mechanical, plasma, hydraulic, and gas systems * Coordinate and communicate directly with customers * Fulfill additional duties, as assigned Minimum Qualifications: * Completion of an Associate degree, military technical training, field service experience, or trade certification * 4-7 years of work experience in semiconductor industry or other equipment support industry * Advanced mechanical aptitude with pneumatics, hydraulics, electronics, vacuum, and/or thermodynamics * Strong knowledge of hand tools and their appropriate usage, including digital multimeters * Effective written and verbal communication skills * Basic knowledge of Microsoft Excel, Word, and PowerPoint * Possession of a valid driver’s license and the ability to obtain a passport, if travel is required * Able to meet all on-site requirements, including safety, environmental guidelines, and COVID-19 protocols Physical Requirements: This position often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, working at height, lifting up to 35 lbs., the ability to distinguish between colors and working with electricity, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields. #LI Associate's Degree (Required), Bachelor's Degree (Required) 4 - 7 Years 10-Day 8-Hr (United States of America) Yes, 20% of the Time No U.S. Salary Range: $37.00 - $51.15 The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable. For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement. Applied Materials is an Equal Opportunity Employer committed to diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Additional InformationPart Time, Seasonal Nov-Jan Job Number25169472 Job CategoryGolf, Fitness, & Entertainment LocationJW Marriott Phoenix Desert Ridge Resort & Spa, 5350 East Marriott Drive, Phoenix, Arizona, United States, 85054___ SchedulePart Time Located Remotely?N Position Type Non-Management Pay Range: $20.00 - $20.00 per hour POSITION SUMMARY Facilitate entertainment performances by providing exceptional service and guest experience through one-on-one interactions with guests while assisting performers. Assist and accompany Character performers to, on and from assigned areas while maintaining the Special Events Character Handling Guidelines to provide for the safety and physical well-being of Character performers. Encourage, recruit, register, and schedule guests to participate in activities for the live shows, events or performances. Promote a fun, energized and comfortable atmosphere for guests. Provide information to guests about available recreation facilities and activities, including providing tours. Lead and/or perform in live shows following basic scripts and using improvisation during shows as needed. Perform confidently in front of audiences while engaging audience members in live-show activities. Explain and promote the rules and regulations of the facility intended for the safety and welfare of guests. Observe activity in the facility and respond appropriately in accordance with local operating procedure in the event of an emergency. Be aware of possible situations where guests are not able to safely participate in an activity and inform supervisor/manager. Prep for show and clean and maintain recreational equipment and supplies. Must have demonstrated experience in previous roles performing the following: accurately and consistently portray the pre-determined style, characteristics and mannerisms of each role without any deviation; perform inside bulky hot costumes for extended periods of time; maintain size and weight requirements based on costume’s pre-determined size; work with large quantities of groups and children; stand for an extended periods of time. Follow all company and safety and security policies and procedures. Report maintenance problems, safety hazards, accidents, or injuries. Complete safety training and certifications. Display clean and professional uniform and personal appearance. Maintain confidentiality of proprietary information. Protect company assets. Welcome and acknowledge all guests according to company standards. Anticipate and address guests’ service needs. Assist individuals with disabilities. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Verify adherence to quality expectations and standards. Visually inspect tools, equipment, or machines (e.g., to identify defects). Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Exposure to outdoor elements, wet and/or humid conditions as well as extreme heat/cold (non-environmental). Work near loud noises, around and in large crowds, and in tight and dark spaces, including in a large costume. Continual use of manual dexterity with frequent use of bi-manual dexterity. Maintain size and weight requirements based on costume’s pre-determined size. Wear and carry special events props and gear for long periods of time. Perform inside bulky costume for long periods of time. Identify and distinguish colors. Perform other reasonable duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent. Related Work Experience: Minimum of 1-year customer or sales experience. Previous public performance, acting, and entertainment experience; experience entertaining children and large groups of people. Supervisory Experience: No supervisory experience. REQUIRED CERTIFICATION License or Certification: CPR Certification First Aid Certification Based on Costume’s pre-determine size restriction, maintain size and weight requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. JW Marriott is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.

Job Description Master's degree in Occupational Therapy, active Occupational Therapist license and 1+ year of Occupational Therapy experience required. Applicants who do not meet these qualifications will not be considered. Occupational Therapist School-Based, Part-Time (3 Days/Week) Phoenix, AZ An opportunity for a skilled Occupational Therapist with experience in school-based settings is available in Phoenix, AZ. This part-time contract position requires a dedicated professional to support students developmental and functional needs within the educational environment. Key Responsibilities: • Assess and develop individualized occupational therapy treatment plans tailored to student needs., • Collaborate with educators, parents, and other professionals to support student progress., • Implement therapeutic interventions to improve fine motor skills, sensory processing, and daily living activities., • Monitor and document student progress, adjusting strategies as necessary., • Provide recommendations for adaptive equipment or environmental modifications., • Licensed Occupational Therapist with school-based experience., • Ability to work effectively with children and adolescents in an educational setting., • Strong communication and collaboration skills., • Knowledge of current occupational therapy techniques applicable to school environments., • Part-time role, 3 days per week.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo, and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality, and a passion for success, join us today! UCT is seeking an experienced and talented Manager, EHS to join our team in Phoenix, AZ! The Manager, EHS leads the development and execution of environmental, health, and safety programs to ensure regulatory compliance, risk mitigation, and a zero-incident culture. This role drives strategic initiatives, audits, training, and incident response while partnering with operations to embed safety into daily practices. As a key advisor, the manager influences site direction, supports change management, and champions continuous improvement across all EHS functions. Essential Duties and Responsibilities: • Assist the team to ensure compliance with the state and federal regulatory agencies and related policies, such as OSHA, EPA, DOT, etc., • Develop and submit all applicable EHS permits, Forms, and reports to EPA, Wastewater, Fire Department, and other regulatory agencies., • Conduct routine compliance EHS audits/inspections, provide reports and action plans to ensure hazardous conditions or at-risk behaviors are identified and corrected, and employees are following EHS policy and procedures., • Develop and conduct Job Hazard Analysis (JHA) for different operations, communicate identified risks, and provide solutions, control measures, and action plans for addressing the risks., • Meet the goal of Zero injuries and accidents to the employees and contractors by establishing a generative safety culture and EHS management systems., • Develop insightful actions, suggest recommendations, and influence the direction of the line by effectively working with the site operations and management team., • Monitor full implementation of EHS programs, evaluate the effectiveness of the programs using established goals and make recommendations, and plan for corrective action(s) based on industry standards and best practices., • Under the direction of the Global EHS Head, develop strategic EHS plans to meet organizational goals., • Drive incident investigations and provide corrective and preventive actions to prevent the recurrence of the incidents., • Provide specialized EHS expertise for the facility, particularly concerning new projects and change management endeavors., • Develop, implement, and deliver training to the new hire and operations employees, EHS programs, policies, and procedures, as well as local and federal requirements and regulations., • Monitor and approve industrial hygiene sampling strategies and results., • Serves as the primary contact and responds to reports of leaks, spills, and any other release of potentially harmful or hazardous materials., • Evaluate the effectiveness of the EHS programs using established goals, make recommendations, and implement corrective action(s) based on industry standards and best practices., • Represent the organization in community or industry safety groups and programs., • Drive and mentor the Safety Committee, communicate action plans, and follow up with action owners., • Work effectively as a team player with multiple working groups and departments., • Demonstrates excellent communication and writing skills., • Act as an EHS subject matter expert and utilize approaches that require innovation and technical skills., • Bachelor of Science (or country equivalent) in Health and Safety, Environmental Engineering, Chemical Engineering field preferred, or equivalent work experience., • Minimum 5+ years relevant working experience, preferably within a chemical, metal finishing, semiconductor, wastewater treatment, oil and gas, or related industries., • Working knowledge of environmental regulations, including stormwater, air/water, Tier 2 reports, Form R, etc. Extensive knowledge of EPA, OSHA, DOT, NFPA, and other governmental regulations and laws., • Strong track record of submitting permits, working with regulatory agencies, leading and developing EHS programs, performing audits, JHA, and gap assessment., • Demonstrated experience in hazardous materials, emergency response team development, implementation, and administration., • Required to wear personal protective equipment when applicable. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job Description Matrix has been named a Zweig Group 2025! About Matrix: Matrix Design Group, Inc., an employee-owned planning, engineering and environmental consulting firm is actively seeking a Project Manager in our Mesa or Phoenix offices. As an employee-owned company we are committed to fostering, cultivating and preserving a culture of diversity, respect and excellence. Our strengths of service, innovation, and skill are a result of that belief. We have a friendly, collegial, cooperative atmosphere and offer a full range of benefits including medical, dental, vision, disability and life insurance; holiday, vacation and sick leave; training and education; 401(k) and an Employee Stock Ownership Plan (ESOP). Matrix employees are encouraged to participate in employee wellness programs, social committees and community outreach programs. We strive to employ highly motivated people with excellent communication and applied problem-solving skills who desire to advance their talents and skills. Salary Range: $85,000.00 To $140,000.00 Annually, Salary will be dependent upon experience. Summary: The Project Manager will be responsible for the management and execution of a variety of civil engineering design and permitting projects. Utilizing consulting expertise, prepares the scope, budget, and schedule for projects to ensure contract requirements are executed on-time and on-budget. Attend project meetings with internal staff and clients and make presentations concerning specific aspects of engineering projects and oversees the work of technical staff. Works with local, regional or state-level clients to assist them in achieving their goals. Essential Functions: • Development of project work plans and scopes of work., • Provide project oversight and schedule monitoring., • Prepare fee proposals and track and manage project budgets and invoicing., • Prepare roadway, grading, drainage, water and sewer plans using AutoCAD and Civil 3D, • Produce project deliverables including technical memoranda, design plans and specifications, and technical reports., • Administer QA/QC for project deliverables., • Prepare supporting calculations, construction specifications, and permitting in various jurisdictions., • Prepare construction cost models and engineer’s opinion of probable cost for projects through various stages of development including due diligence to final construction document submittal for bid., • Participate in proposal presentations and project interviews., • Maintain effective communications with clients and project teams., • Technical reporting and presentations., • Construction observation and coordination with construction contractors., • Ensure that the staff resources are deployed in a productive and profitable manner., • Self-directed practitioner with project management and project delivery skills., • Ability to direct staff, bid projects, and develop project execution plans and technical deliverables., • Outstanding client and personnel skills and the ability to persuasively communicate at all levels., • Technical expert with outstanding team building, writing, proposal development, cost estimating, and program execution skills a plus., • Must be able to work effectively as a project manager in a group environment and maintain. positive relationships with team members and clients., • Organized and detail oriented with excellent interpersonal skills., • Proficiency in Microsoft Suite, AutoCAD Civil 3D, and hydraulic/hydrology software a plus., • Supervise, manage, direct and provide oversight of tasks and responsibilities for engineering staff and/or other technical support as needed. Collaborate with Civil team members, senior Project Managers and Deputy Director of Civil Services. Education and Experience: • Undergraduate or graduate degree in civil engineering., • AZ Professional Engineering (PE) licensure or ability to obtain PE within one year, • Minimum of four (4) years of progressive experience with an emphasis in civil design including drainage, utility, roadway / transportation design, • Experience with traffic, drainage and utility reports a plus, • Experience working with both private and municipal clients, • Industry relationships and an understanding of municipal, state and federal criteria, • Experience and understanding of local, regional, state and federal policies, programs and procedures, • Valid driver's license, in conjunction with successfully passing the Company’s MVR Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Physical Demands: While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. The noise level in the work environment is usually moderate. Matrix Design Group, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, gender, color, religion, sex, national origin, or protected veteran status, and will not be discriminated against based on disability. The expected salary range for this position is displayed in accordance with the Colorado Equal Pay for Equal Work Act. The final agreed upon compensation is based on individual education, qualifications, experience, and work location. Any applicant with a qualifying physical or mental disability who believes s/he requires a reasonable accommodation for any part of the application process should contact us at 719-575-0100 for assistance.

Job Description We are expanding our network of skilled Field Professionals to support Phase I Environmental Site Assessments (ESA) and Property Condition Assessments (PCA). This is a subcontractor opportunity within the commercial real estate due diligence industry, working alongside our full-time team on projects across the United States. As part of our approved Subconsultant Network, you will conduct onsite property inspections (“walk”) and prepare professional reports (“write”) in accordance with ASTM and industry standards. This role is ideal for experienced assessors seeking flexible, project-based work with a reputable national firm. Requirements • Required Qualifications, • Ability to travel to job sites to perform field inspections., • Minimum 2 years of experience conducting Phase I ESA and/or PCA assessments., • Strong technical writing skills and ability to complete full reports independently., • Ability to manage multiple projects and meet established deadlines., • Familiarity with industry standards (ASTM for ESA, or PCA guidelines)., • Preferred / Excellent to have, • Experience using Quire or similar reporting platforms., • Bachelor's degree in Environmental Science, Engineering, Architecture, or related field (not required)., • Professional credentials such as CEP, RA, PE, or similar (beneficial, not required)., • Radon or AHERA (Asbestos) certifications., • Potential for future full-time employment and other career growth oppurtunites., • Competitive Pay, • Flexible work hours

Job Description Facility Maintenance Supervisor 75,000 sq ft Nutraceutical GMP Manufacturing We have an exciting career opportunity for a hands-on Maintenance Facility Supervisor. This position will supervise the assigned facility maintenance function as directed. Key Responsibilities: • Responsible for managing and maintaining a safe, secure and energy efficient modern 75,000 sf facility and cGMP compliant dietary supplement manufacturing plant in Phoenix, Arizona., • Provide and manage the day-to-day operational responsibilities for the entire facility., • Manage, administrate and supervise facility maintenance., • Manage facility and maintenance services to ensure operational reliability., • Oversee preventative maintenance compliance and effectiveness., • Work with Management to plan and achieve operational improvements to reduce costs and to increase productivity., • Resolve all daily occurring unexpected and facility technical problems related to area of responsibility., • Ensure for all equipment in facility to be properly maintained and upgraded as needed., • Provide daily logs including daily scheduled and nonscheduled work sheets and equipment PMs., • Understand, complete, and maintain environmental documentation and equipment service contracts., • Comply with established job safety practices, policies and procedures as specified in plant and corporate directives for the safe performance of the work assignment., • Effectively communicate in person, and electronically to relay information to all parties., • Experienced with HVAC /Plant utility maintenance, including troubleshooting and repair., • Prefer candidates experienced in one or more fields---plumbing, carpentry, electrical, heating, ventilation, and or air-conditioning., • Good computer skills and good with math., • Enjoys teamwork and collaborating in a team environment., • Willing to learn and grow., • Physical demands of position require you to walk, stand, bend and lift up to 8 hours each day., • Possess excellent vision. What We Offer • Competitive salary, • Comprehensive benefits package including medical, dental, and vision, • 401(k) with company match, • Paid vacation and holidays, • Stable work environment with an industry leader Marlyn offers you not only an opportunity to work for a company that is dedicated to the environment and its people, but also offers competitive salaries and comprehensive benefit packages. We offer paid holidays, vacation, and sick time, a 401(k) retirement plan with company match as well as gift cards and luncheons/parties before major holidays. A wide range of benefit choices includes options for medical, dental, vision, life, short and long-term disability insurance plans, legal plans and pet insurance. Marlyn Nutraceuticals is an equal opportunity employer. We are committed to equality for everyone, regardless of age, sex, sexual orientation, race, color, creed, religion, ethnicity, national origin, disability, military or veteran status, or any other legally recognized protected basis under federal, state, or local laws.Marlyn Nutraceuticals is a trusted leader in the dietary supplement industry with over 60 years of dedication to quality, innovation, and sustainability. We leverage a science-based approach to enhance lives through natural wellness solutions. Join our passionate team and contribute to our mission of improving health and well-being.\r\n\r\nMarlyn offers you not only an opportunity to work for a company that is dedicated to the environment and its people, but also offers competitive salaries and comprehensive benefit packages. We offer paid holidays, vacation, and sick time, a 401(k) retirement plan with company match as well as gift cards and luncheons/parties before major holidays. A wide range of benefit choices includes options for medical, dental, vision, life, short and long-term disability insurance plans, legal plans and pet insurance.\r\n\r\nMarlyn Nutraceuticals is an equal opportunity employer. We are committed to equality for everyone, regardless of age, sex, sexual orientation, race, color, creed, religion, ethnicity, national origin, disability, military or veteran status, or any other legally recognized protected basis under federal, state, or local laws.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Technician Lead to join us in Phoenix, AZ! The Production Lead Technician works in our Advanced Technology Cleaning Centers (ATCC)® to process and clean (eliminating micro-contamination) our customers’ new and in process tool chamber parts. These manufacturing processes may use various machines, processes, and chemicals to meet the varying needs of chemistry, material composition, and coatings of different parts components. Processes may take place in a cleanroom or chemical processing environment. He/she may receive, package, bag, inspect, and ship parts. Safety is our number one priority. Personal Protective Equipment (PPE) is required to avoid exposure and protect the individual. The Production Lead Technician follows Standard Operating Procedures (SOPs) and Quality processes and assists the Production Supervisor to ensure all employees are following the safety protocols. • Must be able to work overtime as required., • The Team Leader is responsible for assisting Production Supervisor regarding safety, quality, and overall production of our customers product., • Follows all safety rules and policies and assists Production Supervisor on ensuring employees are following proper safety and regulatory policies., • Leads and assists in directing production workflow through each department., • Monitors job and ensures quality and production standards are met., • Develops and assists with training of employees within each department as needed., • Looks for and makes suggestions to improve safety, quality, efficiency, and organization of work and methods., • Assists Production Supervisor to monitors KPI’s and goals and assists in developing action plans of improvement., • Demonstrates the ability to work within the team environment by participating in the resolution of problems, participation in team meetings, enables associates to work together toward area goals., • Participates in the daily activities of the team such as safety, housekeeping, and other tasks as needed., • Documents all safety, quality, personnel, and equipment issues, and informs the Production Supervisor, • Ability to take SPC measurements and log data., • 3+ years of hands-on experience in manufacturing processes or materials, or equivalent relevant experience is preferred., • Experience in parts cleaning and coating technologies is desired., • Kaizen or Lean training a major plus., • Quality Assurance experience., • Previous experience in the Parts cleaning industry a major plus., • High school diploma or GED. Technical associate degree or some college preferred., • Manufacturing team leader or supervisory experience preferred., • Ability to handle repetitive work and provide fast turn-around on production related to masking, wiping, processing parts., • Good verbal and written communications., • Must be computer literate, in particular Microsoft Word and Excel., • Ability to work a flexible work schedule including some weekend and evening work., • Must be able to wear work area gowning and other required PPE. Work Experience: • 2+ years’ experience in a manufacturing environment; leadership experience preferred. Criteria: Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Ability to stand for extended periods, kneel, reach, walk, push, pull and grasp., • Exerting up to 35 pounds of force occasionally, and/or up to 35 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects., • Ability to move arms, hands, and fingers., • Ability to stand for sustained periods of time., • Required to wear personal protective equipment., • Prolonged standing with some sitting and bending intermittently during work hours., • Required to wear personal protective equipment where applicable., • Subject to frequent interruptions., • Subject to hazards including electrical current, moving mechanical parts, exposure to chemicals and debris. At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo, and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality, and a passion for success, join us today! UCT is looking for a talented Supervisor Production to join us in Chandler, AZ! The Production Supervisor will be required to work in all the areas of production, supervising all aspects of the production operation within the facility of their responsibility. This position is a hands-on position within the production area. The Production Supervisor is required to spend 90% of his day on the production floor. Essential Duties and Responsibilities: • Supervises manufacturing personnel in the welding, assembly, and grinding areas., • Develops work schedules., • Hires, trains, and develops staff members., • Maintains a current training/skill matrix., • Oversees all production issues for a work group or shift., • Maintains a clean and safe work area, • Works closely with materials, engineering, quality, and other staff to ensure delivery schedules are met, parts are available as needed, and quality is maintained., • Effectively manages individuals and teams, including performance management, conflict resolution, work scheduling, training, and successful accomplishment of delivery and quality objectives., • Strong management, leadership, and organizational skills., • Strong verbal and written communication skills., • Ability to work effectively with operations and other groups to ensure that site delivery and quality issues are met., • Working knowledge of MRP/ERP applications; SAP preferred., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Ability to climb, stoop, kneel, crouch, reach, walk, push, pull, and grasp., • Ability to stand for sustained periods of time., • Ability to lift up to 25 lbs., • Ability to move arms, hands, and fingers., • Works in a manufacturing area, with some changes in temperature, as well as throughout the premises., • Subject to hazards including electrical current, moving mechanical parts, exposure to chemicals, and debris., • Required to wear personal protective equipment where applicable. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job DescriptionSalary: Now hiring a Safety Coordinator for acid operations! CTI, Inc is seeking a highly skilled and safety-conscious Safety Coordinator to join our team at our Laveen, AZ Terminal to oversee the Central/NW AZ region. the ideal candidate will establish and promote safe, accident-free, and healthy work environment while adhering to strict safety protocols, MSHA, and FMCSA regulations. The coordinator will also have to occasionally visit projects along the California and Mexican border Home Terminal: Laveen, AZ Perks, Bonuses & Benefits • Weekly Pay, • Health Benefits after 60 days, • Eligible for discretionary annual bonus, • Cell phone stipend, • Dedicated shift vehicle, • Vacation, Sick, and Holiday pay, • 401(k) match, • Wellness program Job Requirements: • Valid Drivers License required; Class A Commercial Driver License w/ tank and Hazmat endorsements preferred, • University program certificate or a minimum of two (2) years transportation-related experience/training preferred, • Two (2) years of experience in environmental and safety compliance, specifically with DOT, MSHA, OSHA, FMCSA, EPA, and PHMSA regulations preferred, • MSHA Instructor Certification, or ability to obtain one year of hire preferred., • Authorized access to Freeport McMoRan Inc. (FMI), • Required to wear a respirator for certain tasks, which also requires that you are clean-shaven daily., • No more than 2 moving violations within the previous 3 years, • No major violations within the previous 5 years, • Ability to work in an outdoor work environment and around equipment, • Bilingual in Spanish preferred., • High School diploma or equivalent preferred., • Proficient in MS Office (Word, Excel, Power Point and Outlook) Responsibilities: • Assist in planning, organizing and implementing CTIs Safety Management Programs and Procedures at industrial construction projects, owner sites, mines and in other work locations., • Conduct safety coaching and training, job safety analysis, workplace audits and incident response as needed., • Embody the CTI approach to safety, being constantly aware of conditions and work practices, being empowered to stop all unsafe work when needed., • Participate in the investigation of accidents and injuries, and cooperate in the preparation of material and evidence for the organization to use in hearings, lawsuits, and insurance investigations, • Respond to incidents, perform investigation, drug test and write detailed report., • Must be able to interact professionally with all levels of craft, staff, management and clients while simultaneously managing a diversified workload and challenging situations efficiently and effectively., • Ability to read, write and communicate effectively. Ability to communicate information in verbal and written form, as well as the ability to listen and interpret information effectively., • Understand FMCSA 49 CFR Part 395 for driver log management. Working Conditions: • Primarily a field position. Fast-paced project site environment., • Work varying hours and schedules, including nights, weekends, and holidays, with frequent travel (over 60%) and regular overnight stays on short notice., • Working outdoors in varying ambient temperatures and conditions., • Regularly sit, stand, squat, walk, crawl, use legs and feet; and drive for extended periods of time; occasionally lift and move objects up to 70 pounds., • Occasional climbing of stairs and/or ladders, working at elevations of 14 feet above the ground, bending over, opening and closing hatches, shifting gears, shoveling and cleanup of spills. PERSONAL PROTECTIVE EQUIPMENT (PPE) requirements: PPE is required and must be worn in accordance with company policy and the Standard Operating Procedures (SOP) for each work site. CTI, Inc. is an Equal Opportunity Employer. CTI promotes a drug/alcohol-free work environment through the use of mandatory pre-employment and ongoing random testing. Applicants for this position will be required to undergo a drug test, which includes screening for marijuana and other prohibited substances. Please note that while marijuana may be legal under state law, it is not permitted for safety-sensitive positions at CTI, Inc. A positive test result will disqualify you from consideration for this role. Company policy could disqualify an applicant who has certain criminal history from employment in particular positions. An individual may qualify for this position if the individual is able to safely perform the essential functions of the positions, with or without reasonable accommodation. Safely perform means to perform without causing direct threat to the health and/or safety of the individual or others. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of this position. To request an accommodation, please contact our Human Resources office. Safety Coordinator job description is available upon request. This is a safety-sensitive position.

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior Water/Wastewater Engineer / Senior Project ManagerLocation - Phoenix, AZJob Type – Hybrid, Onsite#LI-BG1 Stanley Consultants is seeking a Senior Water/Wastewater Engineer / Senior Project Manager for our Phoenix, AZ office. Stanley Consultants is actively working in the Water/Wastewater Market in Arizona and needs additional leadership to maintain our current market presence while assisting our existing team to build Stanley’s water market presence. In doing so, this position will lead and deliver water, wastewater, and groundwater projects in the State of Arizona. This individual will be responsible for the development and management of all aspects of municipal water and wastewater utility system project planning, design, and services during construction.The Senior Water/Wastewater Engineer / Senior Project Manager will have an Arizona network of water/wastewater related connections and regional expertise in one or more of the following: • Water distribution, transmission, and storage, • Water treatment, • Wastewater conveyance and peak weather flow infrastructure, • Wastewater treatment, • Water Reuse, • Pump Stations, • Hydraulic modeling, • Asset management, • Risk and resiliency consulting and design, • Smart water system planning, design, and implementation, • Leading teams in the delivery of water/wastewater projects., • Participation in local professional organizations, preparing, and presenting market specific papers and presentations., • Work in collaboration with other disciplines (civil, mechanical, electrical, I&C, structural, and CAD) in producing plans and specifications., • Assisting in marketing business opportunities with key clients and development of responses to RFPs/RFQs., • Providing marketing and support during the procurement and execution of projects., • Developing and maintaining long-term relationships with clients., • Consistently managing and delivering projects on time and within budget., • Desire and ability to manage and mentor staff.Required Qualifications:, • Bachelor of Science (BS) degree in either Civil Engineering, or Environmental Engineering., • A minimum of 10 years of relevant experience., • Professional Engineer (PE) license in Arizona is required or ability to obtain within 6 months of hire date., • Arizona network of water/wastewater professionals/contacts., • Regional and technical expertise in water and wastewater engineering., • Active participation in professional organizations., • Strong verbal, computer, and organizational skills., • Excellent technical writing skills., • Strong client relationship skills., • Excellent design team leadership skills.Preferred Qualifications: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: The Behavioral Health Therapist is part of a multi-disciplinary team, which provides a comprehensive care program for clients receiving behavioral health services at Prisma Community Care. The Prisma behavioral health program is designed to empower clients to develop healthy choices and continue to live well irrespective of a person’s sexual orientation, gender identity, gender expression or HIV status. The behavioral health program serves all people with general behavioral health outpatient services while also offering a special focus on outpatient treatment for members of the 2SLGBTQIA+ community as well as for people living with HIV/AIDS (PLWHA). The Behavioral Health Therapist, under the direction of the Clinical Director of Mental Wellness, is responsible for addressing the behavioral health needs of Prisma clients, specifically using psychotherapy for the purpose of assessment, diagnosis and treatment of individuals, couples, families, and groups. In this position, you will provided psychotherapy to clients and/or refer the clients to other appropriate human services within the agency or the greater Phoenix area. The Behavioral Health Therapist will also provide assistance and learning opportunities for colleagues. The Behavioral Health Therapist supports the Prisma Community Care mission of providing affirming and inclusive services to promote well-being and advance health equity for diverse communities and all those seeking compassionate care - especially people of color, 2SLGBTQIA+ and Queer individuals, and those affected by HIV. What your day will look like at Prisma Community Care: • You will be 70% patient-facing for billable counseling clients and 30% of your time will be for administrative time to include but not limited to completing documentation, charting, and supervision., • You will be expected to have at least 28 billable hours per week (70% Productivity)., • You will provide comprehensive psychotherapy services for Prisma Community Care clients, including initial assessment and ongoing psychotherapy., • You will create treatment plans, defining and prioritizing the areas to be addressed, working with the client to develop short- and long-term goals and the strategies for achieving them within a given time frame., • You will review all treatment plans with the Clinical Director of Mental Wellness or designated supervisor for each client., • You will provide individual, family, and group psychotherapy to facilitate the changes the client desires or needs., • You will provide crisis intervention as needed., • You will consult and collaborate with other professionals both within and outside the organization to facilitate client treatment., • You will maintain mental health reports and records in a timely manner., • You will also provide statistics and documentation required to maintain administrative records., • You will participate in outreach into the community to identify prospective clients and/or community needs and facilitate the satisfaction of those needs., • You will provide educational presentations, as needed, within the agency and throughout the community., • You will participate in supervision with the Clinical Director or designated clinical supervisor as required by the Office of Behavioral Health Licensure, Board of Behavioral Health Examiners, and Prisma Community Care policies and procedures., • You will promote positive client relations in accordance with Prisma Community Care policies and procedures., • You will serve as an advocate for clients concerning their mental health needs., • You will meet regularly with the Clinical Director of Mental Wellness., • 200 hours of PTO per year, • Up to 13 paid holidays per year, • Medical, dental, and vision insurance, • Basic life, short-term, and long-term disability insurance paid by Prisma Community Care, • Employee Assistance Plan (EAP), • You have earned a graduate degree in behavioral health (e.g., Counseling, Social Work, Substance Abuse, or Psychology) with at least one year of clinical experience or case management experience., • You have extensive knowledge of mental health and community resources., • You have full understanding of HIPAA and protecting client confidentiality., • You are proficient in Microsoft Office (Word, Excel, Outlook, PowerPoint) software applications and competent in using electronic medical records (EMRs) and information systems in providing effective documentation of client care., • You possess and maintain a valid driver’s license and have access to transportation at all times for work related duties., • You are able to work in a fast-paced environment with changing deadlines and priorities while maintaining a positive attitude., • You have demonstrated the ability to establish rapport and maintain effective communication with culturally diverse populations from a wide range of life circumstances and backgrounds., • You are actively holding an associate license which includes a Licensed Master of Social Work (LMSW), Licensed Associate Counselor (LAC), Licensed Associate Marriage and Family (LAMFT) or Licensed Associate Substance Abuse Counselor (LASAC) by the State of Arizona Board of Psychologist Examiners or Board of Behavioral Health Examiners, respectively., • You have demonstrated a sound understanding of gender identity, gender expression, gender presentation, sex, and sexual orientation etc., • You have experience applying National Standards for Culturally and Linguistically Appropriate Services (CLAS) in a healthcare setting., • You have knowledge of the complex issues that marginalized populations are faced with and the barriers they experience accessing healthcare., • You have knowledge of issues and community resources related to HIV/AIDS, chemical dependency, mental health, housing, health insurance, and other barriers., • Work primarily in a climate-controlled environment with minimal safety/health hazard potential., • Office environment, exposure to computer screens for lengthy periods of time., • The position requires extensive use of clinical documentation by typing notes using a standard computer keyboard. The electronic medical record may not support use of spell-check or transcription devices, which should not be expected for completion of documentation., • While performing the duties of this job, the employee is regularly required to walk, sit, stand; use hands, talk, and hear. The employee is occasionally required to reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, and ability to adjust focus., • Currently have, or be able to obtain within 90 days of employment, a valid Fingerprint Clearance Card, • Currently have, or are able to obtain within 7 days of employment, a clear TB test, • Currently have, or are able to obtain within 7 days of employment, a current flu vaccination, • Currently have, or are able to initiate within 7 days of employment, a Hepatitis-B primary vaccination series Prisma Community Care is an equal opportunity employer and we value a healthy work environment free from harassment and discrimination based on race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability or genetic information. Prisma Community Care provides an inclusive and respectful working environment that represents a wide range of backgrounds, cultures, identities, and experiences. We attract applicants who have the cultural awareness to navigate and celebrate these differences. Our employees are Individuals who have respect for the communities where they live and work and are committed to utilizing culturally and linguistically appropriate strategies and skills in a collaborative environment. Reasonable Accommodations Applicants requesting a reasonable accommodation to apply or participate in the interview process for this position should email .

Job Description Matrix has been named a Zweig Group 2025 Best Firm to Work For! About Matrix: Matrix Design Group, Inc., an employee-owned planning, engineering and environmental consulting firm is actively seeking a Project Engineer in our Phoenix or Mesa offices. As an employee-owned company we are committed to fostering, cultivating and preserving a culture of diversity, respect and excellence. Our strengths of service, innovation, and skill are a result of that belief. We have a friendly, collegial, cooperative atmosphere and offer a full range of benefits including medical, dental, vision, disability and life insurance; holiday, vacation and sick leave; training and education; 401(k) and an Employee Stock Ownership Plan (ESOP). Matrix employees are encouraged to participate in employee wellness programs, social committees and community outreach programs. We strive to employ highly motivated people with excellent communication and applied problem-solving skills who desire to advance their talents and skills. Salary Range: $65,000.00 To $90,000.00 Annually, Salary will be dependent upon experience. Summary: Performs assignments designed to develop professional knowledge and abilities, requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related engineering tasks. Limited exercise of judgment is required on details of work and in making preliminary selections and adaptations of engineering alternatives. Essential Functions: • Design land development projects for residential, commercial and municipal development., • Prepare roadway, grading, drainage, water and sewer plans using AutoCAD and Civil 3D., • Prepare traffic, drainage and utility reports., • Prepare supporting calculations, construction specifications, and permitting in various jurisdictions., • Prepare construction cost models and engineer’s opinion of probable cost for projects through various stages of development including due diligence to final construction document submittal for bid., • Work within defined scope, schedule and budget parameters., • Communicate as appropriate to directors, project manager, and project team concerning questions, concerns, progress and results., • Work in an integrated team with various disciplines and clients., • Coordinate with other disciplines and locations as necessary. Competencies: • Ability to take direction and work independently as well as effectively collaborate with teams., • Strong verbal, written and presentation skills., • Good technical writing skills., • Knowledgeable in Civil 3D., • Proficient in Microsoft Office Suite. Education and Experience: • Undergraduate or graduate degree from accredited program in civil engineering and 2 to 5 years engineering experience., • Minimum of EI certification, PE license strongly preferred., • Valid driver's license, in conjunction with successfully passing the Company’s MVR check., • Experience working with both private and municipal clients preferred., • Working knowledge of Civil 3D (Ability to write reports, specifications, and perform design in Civil 3D strongly preferred.) Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Physical Demands: While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. The noise level in the work environment is usually moderate. Matrix Design Group, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, gender, color, religion, sex, national origin, or protected veteran status, and will not be discriminated against based on disability. The expected salary range for this position is displayed in accordance with the Colorado Equal Pay for Equal Work Act. The final agreed upon compensation is based on individual education, qualifications, experience, and work location. Any applicant with a qualifying physical or mental disability who believes s/he requires a reasonable accommodation for any part of the application process should contact us at 719-575-0100 for assistance.

Job Description About BFL Construction Founded in 1973, BFL Construction has a diverse portfolio of projects within the Institutional, Non-Profit, Commercial, Education, Health & Biomedical, Industrial, and Multi-Family space and is part of the JV Driver portfolio of companies. As a specialist in construction management, we provide complete oversight of each project from preconstruction to close-out and ongoing services through the warranty period. Urban Metro Builders Inc. (Company) is a division of BFL Construction and specializes in multi-family and single-family residential projects. What we Offer We are committed to the well-being of our employees and offer a competitive salary and a well-rounded benefits package, including 401k contributions, health and dental benefits, training fund, and paid time off. We fully support the growth of our team and have formal and informal training/development opportunities to help you succeed in your role and meet your aspirations. We have an Impact committee that focuses on mental health, community involvement and environmental footprint. In addition, we conduct annual employee engagement surveys and take steps to continuously strengthen our employee experience. Opportunity Summary We are actively looking for a Project Coordinator to join our team on various commercial and multi-family projects. Reporting to the Project Director and supporting the project team, you will be part of a team that collaborates to drive creative solutions for our clients and external/internal stakeholders. Key Responsibilities • Assisting the Project Management team & Superintendents to ensure that delivery of critical project elements is expedited and completed., • Contribute to management of all aspects of the project including profitability, schedule adherence and customer expectations., • Processing subcontracts and purchase orders, as well as Prime and Subcontract progress claims., • Process all change orders, including assessing cost and schedule impact., • Preparing site documentation., • Coordinate RFIs with project team and coordinate with Architects and Engineers for timely responses., • Develop and maintain important construction tracking logs (I.E. RFI log, Submittal log, plan log, etc.), • Performing routine site visits and attending site meetings as requested by Project Management team, documenting, and distributing associated meeting minutes., • Assist with all change orders and communicating with project management team to determine next steps., • Coordinate all facets of project close-out, including archiving of documents, maintenance and warranty manuals, deficiencies, and warranty work., • Identify and review and process submittals., • Contribute to all aspects of the project including profitability, schedule adherence and customer expectations., • Contribute to maintaining project safety culture., • Work with accounting department to ensure project accounting is accurate and timely., • Review subcontractor applications for payment., • Able to review plans and subcontractor scopes of work for estimating process., • Job duties will vary depending on projects and as assigned., • Live and model the behaviors as aligned with BFL Constructions Values. BFL Construction Values • Respect | We lead with integrity to employer and engage each other, • Evolve | We broaden our knowledge and expertise through the ability to adapt and grow., • Accountability | We build trust by taking ownership of out actions and results with out team, partners, and stakeholders., • Leadership | We guide and inspire others through transparent communication and decision making. Qualifications • Completion of secondary education in a Construction Management or Engineering related discipline., • 2+ years of experience working in construction project management or field experience considered an asset., • Familiarity with drawings, contract administration, document management, scheduling software and change order procedures., • Excellent communication, organizational and problem-solving skills., • Proficient knowledge of Microsoft Word, Excel, and Outlook with Procore experience considered an asset., • Experience or willingness to learn Lean construction methods., • Solid understanding of construction drawings, specifications, methods, and procedures., • Excellent relationship building and track record of integrity when dealing with Clients, Trades and Consultants., • Excellent organizational, time management, verbal, and written communication skills., • Ability to establish positive working relationships with a variety of people., • Experience using MS Project or other PM software., • Ability to work in a team environment. With a career at BFL Construction, you will participate in a growing portfolio of diverse and exciting projects. Each day brings another opportunity to develop and broaden your skills and experience. BFL Construction is an Equal Opportunity Employer. We strongly encourage diverse candidates to apply to our welcoming and inclusive team!

Job DescriptionWho We Are Dudek is a leading environmental, planning, and engineering firm that help public and private clients plan, design, and build projects that improve communities’ built and natural infrastructure. Founded in 1980, Dudek has grown steadily to more than 800 professionals across the U.S. and received the Top Workplace Award for 2024. As a 100% employee-owned company, Dudek’s culture rewards smart, productive team members with ownership, professional development, and financial benefits. We seek creative, pragmatic problem-solvers working at the intersection of science, engineering, regulations, and multiple stakeholders’ interest to help clients achieve project goals. We encourage collaboration, sustainability, and innovation. At Dudek, we abide by shared values: Trust: We trust each other to use good judgment. Respect: We act professionally and treat each other fairly. Teamwork: We come together, share openly, and apply diverse perspectives. Fun: We take our work seriously…not ourselves. Well-Being: We care about each other’s health, safety, and total wellness. Our culture is the foundation of who we are and how we work. Learn more about our culture. About The Job We are seeking entry- and mid-level professionals to conduct biological field surveys and construction monitoring in AZ. Positions will be based at project sites located throughout Arizona. Candidates will have some experience with biological survey techniques, a background in biology, a willingness to perform strenuous physical activity in harsh desert climates with uneven and sometimes difficult terrain, problem-solving capabilities, and a desire to learn and work as part of a team. Preference will be given to candidates that have experience with target species in Arizona including Sonoran desert tortoise, burrowing owl and Arizona native and rare plants. These candidates have participated in or led/helped lead surveys. Any candidate must possess the ability and willingness to continually hike in desert climates for days or weeks at a time, use GIS and data collection applications, navigate terrain and drive off road. Having a 4wd and/or high clearance vehicle is a plus. Learn more about the projects you will have the opportunity to shape. Who You Are To thrive at Dudek, you should be comfortable with accountability, collaboration, flexibility while being a resourceful and independent thinker. We look for curious, solution-focused people who can adapt quickly to an ever-changing industry. There is no single way to solve a problem, so we encourage innovation. Duties and Responsibilities (may include some or all of the below): • May be involved with all or a selection of the following, individually or as part of a team:, • Compiling available research data and evaluating applicability to specific project sites, • Vegetation mapping and habitat characterization, • General habitat assessments and surveys for plant and wildlife species, • Construction monitoring, • Work as a member of our team in the preparation of technical reports and studies including biological constraints analyses, wetland delineation reports, wetland permit applications, focused survey reports, threatened and endangered species permitting documentation, and biological resources technical reports. This includes working individually and as part of a team on the following:, • Assembly and synthesis of data related to biological issues and impact assessment, • Coordination with internal staff and sub-consultants preparing technical reports, • Coordination with technical staff in document preparation, map and exhibit preparation, editing and production and distribution tasksMinimum Requirements, • Bachelor’s degree in biology, ecology, botany, or related natural resources field, or equivalent experience, • Must possess a valid driver’s license and have active personal automobile liability insurance by first day of employment., • Experience in performing biological surveys, or a willingness to learn., • Background and/or coursework in biological field methods or biological science, • Ability to hike in harsh desert conditions for many days at a time * As a federal contractor, successful candidates are required to pass the following pre-employment requirements prior to beginning employment: pre - employment drug test and background check. Preferred Qualifications • Experience in performing biological surveys for desert tortoise, previous USFWS authorized biologist status or requisite qualifications and experience to obtain authorized biologist status, • Background and/or coursework in biological field methods, • Wildlife survey experience in CA, NV and/or AZ, • Must demonstrate solid written and verbal communication skills., • Highly organized with the ability to multi-task in a fast-paced environment., • Self-motivated with an interest to learn and grow as a project team., • Must have a valid driver's license, • This job operates in an outdoor or office-based environment and this role routinely uses standard office equipment such as computers, phones, printers, etc., • This job requires project site visits which are based outdoors which can include excessive noise, uneven walking surfaces, extreme weather, moving vehicles and equipment.Physical Requirements: The physical demands described here are representative of those that must be met in order to successfully perform the essential functions of the job., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus., • Employees must be capable of bending, squatting, climbing ladders, and lifting up to 35 lbs. unassisted; 50lbs in a team lift (two or more employees)., • Outdoor activity may involve walking/trekking in uneven terrain over long distances in extreme weather conditions for extended periods of time.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Proposed Salary Range: $25-$40 hourly* *Final agreed upon compensation will be based on a variety of factors including but not limited to an individual’s related experience, education, certifications, skills, and work location. Perks of Being a Dudekian At Dudek we will provide you with a competitive salary in an environment that promotes growth, career development, and a flexible work–life balance. Dudek offers an array of benefits, from medical, dental, and vision coverage, to the discretionary bonuses, based on firmwide, divisional, and individual performance. We also offer a yearly merit review, an employee stock ownership program, and dog friendly offices! To honor our key value of well-being, Dudek provides generous Paid Time Off (PTO) packages for both salaried and hourly employees. If you’re tired of an overly bureaucratic decision-making process and want to be part of a work culture that puts its employees first, speak with your recruiter to learn more about the great perks of being a Dudekian. *As-needed and part-time employees are eligible for our 401(k) plan, sick leave, and our Employee Assistance Program (EAP). As-needed and part-time employees have the option of additional benefits like medical benefits and ESOP participation provided they meet minimum hours worked during the 12-month look back measurement period. Speak with your recruiter to learn more. Dudek is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status, or other characteristics protected by applicable law. Dudek is a U.S.-based employer. All positions are based in the U.S. and require U.S. work authorization. Powered by JazzHR O6fVb34U4c

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description ABOUT THE ROLE This internship is for Summer 2026. The CI Intern at Cornerstone Building Brands offers an excellent opportunity to gain hands-on experience in process improvement methodologies and contribute to meaningful projects that drive efficiency and effectiveness across the organization. Reporting directly to the Quality/Engineering Manager. WHAT YOU’LL DO • Assist in the identification of process improvement opportunities through data analysis and stakeholder consultation., • Participate in cross-functional teams to develop and implement process improvement initiatives., • Support the documentation of current processes, standard operating procedures, and best practices., • Help track and report on key performance indicators to measure the success of improvement efforts., • Collaborate with team members to develop training materials and deliver training sessions on new processes and tools.Qualifications WHAT YOU’LL NEED • Currently enrolled in Bachelors degree program pursuing a relevant major., • Strong analytical skills with the ability to collect, organize, analyze, and disseminate significant amounts of information with attention to detail and accuracy., • Excellent communication and interpersonal skills, with the ability to effectively interact with colleagues at all levels of the organization., • Proficiency in Microsoft Office suite, particularly Excel, PowerPoint, and Visio., • Familiarity with continuous improvement methodologies such as Lean, Six Sigma, or Kaizen is a plus. Additional Information WHAT YOU’LL GET • Hands-on experience working on real-world projects with direct impact on business operations., • Mentorship and guidance from experienced professionals in the field of continuous improvement., • Networking opportunities with colleagues and industry professionals., • Competitive internship compensation package. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionDescription: Job Title: Chief Engineer Location: Everhome Suites Glendale Arizona Job Type: Full Time Pay: $21-23/hour As the Chief Engineer with Superhost Hospitality at Everhome Suites Glendale Arizona, you will be the driving force behind the maintenance and functionality of our facilities. Your responsibilities include: • Overseeing and managing hotel maintenance., • Conducting routine inspections and implementing preventive maintenance programs., • Addressing and resolving technical issues promptly to ensure the safety and comfort of guests., • Collaborating with other departments to support the overall operation of the hotel. We are seeking an individual with the following attributes: • Leadership Skills: Proven ability to lead and motivate a maintenance and engineering team., • Technical Proficiency: Strong understanding of engineering principles and maintenance tasks., • Problem-Solving: Ability to identify and address complex technical issues efficiently., • Previous experience in a maintenance technician role is required., • Hotel experience is preferred., • Availability for varying shifts, including weekends and holidays. In your initial phase, you will familiarize yourself with our hotel's engineering and maintenance standards and procedures. Working closely with your team, you'll actively contribute to maintaining a high standard of facility operations, ensuring a positive and secure environment for our guests. The Perks of Working for Us: • Comprehensive benefits package, including health, dental, vision, 401(k), pet insurance, and additional supplemental benefits., • Paid time off available for full-time associates., • Exclusive travel discounts at our hotel partners and franchises worldwide., • Participation in our Wellness program to support your overall well-being., • On-demand pay opportunities for instant access to earnings between paychecks., • Access to a leadership development program and diverse growth opportunities. Superhost Hospitality is an equal opportunity employer, fostering an inclusive and diverse workplace. About Superhost Hospitality: People Focused. Performance Driven. With over 40 years of industry expertise, Superhost Hospitality is committed to Corporate Excellence and Social Responsibility. With a portfolio of dynamic assets affiliated with industry-leading brands, we prioritize unwavering service commitment. This approach ensures customer loyalty, attracts exceptional associates, and positions us as a top performer in the industry. Our people-centric culture focuses on attracting, developing, and retaining the best talent, fostering a great work experience, and supporting career advancement. Join us on a journey that values people and drives outstanding performance. Requirements:

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Expeditor Technician III to join us in Phoenix, AZ! This role combines the critical coordination and workflow management responsibilities of an Expeditor with the hands-on technical expertise of a Technician. The ideal candidate will be highly organized, detail-oriented, and thrive in a fast-paced production environment. They will ensure the timely delivery of parts, perform essential cleaning and processing tasks, and collaborate with our team to move parts through the process, including locating parts, assembling kits, and loading parts. Essential Duties and Responsibilities • Coordinate and expedite the flow of products, jobs, and assemblies between departments to meet production schedules., • Work closely with project managers, planners, and shop employees to maintain a constant flow of work orders., • Monitor and report delays or issues affecting production flow, including equipment, tooling, and resource constraints., • Compile and review production schedules, reports, and job statuses across various stages of work-in-progress (WIP)., • Communicate effectively with internal stakeholders and customers using verbal, written, and visual tools (e.g., drawings)., • Organize and integrate production delivery schedules, ensuring alignment with customer specifications and expectations., • Process parts using chemical and manual cleaning methods to eliminate micro-contamination., • Perform tasks such as receiving, masking, scrubbing, chemical processing, blasting, coating, drying, and packaging., • Follow Standard Operating Procedures (SOPs), Lean manufacturing principles, and safety protocols., • Handle hazardous chemicals safely and maintain proper disposal practices., • Maintain cleanliness and organization of assigned process areas., • Take SPC measurements and log data accurately., • Participate in safety meetings and ongoing training programs., • Learn and apply various tank chemistries and chemical recipes. Knowledge, Skills, and Abilities • Strong verbal and written communication skills., • Independent thought, good judgment, problem-solving skills, and the ability to prioritize multiple projects., • Strong organizational skills and time management abilities., • A team player with solid interpersonal skills., • Self-motivated with little or no supervision., • Strong computer skills (Will use Excel / Microsoft Teams)., • Ability to interpret technical drawings and customer specifications., • Comfortable working in both cleanroom and manufacturing environments. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Experience Requirement 3+ yrs of experience in a production /manufacturing/warehouse setting. Intermediate knowledge of Excel and familiarity with Microsoft Teams preferred Educational/Certification Requirement: High School Diploma and/or equivalent experience. AA or Technical School preferred. Physical Demands and Working Conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a production and cleanroom environment. Physical Demands • Ability to climb and stoop., • Ability to stand for sustained periods of time., • Ability to move arms, hands, and fingers., • Ability to li up to 40 lbs. consistently., • Ability to li over 40 lbs. with assistance., • Have the visual acuity to perform the given task., • Ability to sit for sustained periods of time., • Ability to talk on the phone and use a computer for extended periods of me., • Work with hazardous chemicals daily. Environmental Exposure • Subject to frequent interruptions., • Required to wear personal protective equipment where applicable., • Subject to hazards including electrical current, moving mechanical parts, and exposure to chemicals., • Subject to various noise levels from manufacturing and office equipment. Overnight Travel Work may require out-of-town travel depending upon assignment (training and meeting). UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off At Ultra Clean Technology, we don’t just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior Engineer / Project Manager - Water/Wastewater Pipeline and Pump StationLocation - Phoenix, AZJob Type – Hybrid, Onsite#LI-BG1 Stanley Consultants is seeking a Water/Wastewater Pipeline and Pump Station Senior Engineer / Project Manager for our Phoenix, AZ office. Stanley Consultants needs additional leadership to maintain our current market presence while assisting our existing team to build Stanley’s water market presence. In doing so, this position will lead, deliver, and manage projects through study, design and construction phases of water pump stations, wastewater lift stations, stormwater pump stations, large diameter pipelines and utility work.The Senior Engineer / Project Manager is a professional that is well versed in all aspects of engineering services for pump stations and pipeline and regional expertise projects through: • Independently developing detailed designs, plans, specifications, and estimates for pipelines, pump stations, and other potable water and wastewater conveyance systems., • Leading the planning, evaluation, and design of potable water and wastewater conveyance projects, serving as the design or technical lead., • Responsible for engineering and process design, project coordination, writing engineering specifications, planning work, choosing the right design methods, making reports, and working directly with the owner., • Serving as a project manager on utility projects., • Coordinating and, when necessary, directing the work of single or multidisciplinary teams throughout the project’s lifecycle, from development and initiation to close-out., • Managing multiple projects concurrently, ensuring coordination and timely production., • Engaging in client relations and participating in marketing and design meetings., • Conducting work sessions for deliverable development in collaboration with other staff and stakeholders as needed., • Participating in staffing and workload coordination throughout the entire project lifecycle, ensuring that deliverables are completed on schedule., • Tracking the financial aspects of projects and coordinating and adjusting work efforts with the team to ensure that projects are completed within the agreed budget and schedule., • Conducting quality control reviews of designs and implementing QA/QC procedures., • Overseeing projects from start to finish, ensuring quality is maintained throughout., • Planning work effectively and communicating with project resources and teams., • Asset management., • Risk and resiliency consulting and design., • Smart water system planning, design, and implementation., • Performing other duties as required.What You Will Be Doing:, • Serving as primary client contact, advising and informing them regarding project status and schedule, • Communicating with regulatory agencies, vendors, contractors, partner firms, whose work or services are related to the project and communicating relevant information to the community, or technical groups with interests related to the project, • Performing and directing complex studies and investigations and preparing reports of findings, • Strong understanding of applicable industry standards, laws, policies and procedures, • Ability to build, effective implement and manage training programs; workload and staffing plans; marketing plans and proposal preparation and budgets, • Advanced analytical and problem-solving skills, • Success-oriented attitude and self-starter who takes initiative, • Selecting equipment and material for projects and/or approving manufacturer’s shop drawings of these items, • Coordinating phases of the work to ensure completion within the established time and budgetary constraints, • Participation in local professional organizations, preparing, and presenting market specific papers and presentations, • Work in collaboration with other disciplines (civil, mechanical, electrical, I&C, structural, and CAD) in producing plans and specifications, • Assisting in marketing business opportunities with key clients and development of responses to RFP/RFQs, • Providing marketing and support during the procurement and execution of projects, • Developing and maintaining long-term relationships with clients, • Consistently managing and delivering projects on time and within budget, • Desire and ability to manage and mentor staffRequired Qualifications:, • A minimum of a Bachelor of Science (BS) degree in either Civil Engineering, or Environmental Engineering is required; a Master of Science (MS) degree is preferred., • A minimum of 10 years of relevant experience., • Professional Engineer (PE) license., • Must possess a network of water/wastewater professionals/contacts., • Regional and technical expertise in design of in water pump stations, wastewater lift stations, and large and small diameter pipelines., • Participate in local and national professional associations including the American Water Works Association and Water Environment Association. Actively participate by seeking leadership roles in the organization and presenting at conferences., • Possess strong verbal, computer, and organizational skills., • Must have excellent technical writing skills., • Possess strong client relationship skills. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Project Manager to join us in Austin, TX or Phoenix, AZ! The Project Manager will be responsible for managing the quotation and proposal process for new business opportunities. The senior Project Manager will also assist in development of sales and marketing metrics and management of the sales forecast. Additional responsibilities may also include evaluation of new business opportunities for growth potential, profitability, and many other strategic criteria. Essential Duties and Responsibilities: • Work closely with Sales and Supply Chain Management to complete new business opportunity quotations and develop comprehensive new business proposals including pricing models, cost reduction projections, and preliminary project planning., • Maintain sales and marketing metrics as well as the sales forecast., • Expert knowledge of MS Office, particularly Excel and PowerPoint., • Strong communication and multi-tasking skills are required., • Ability to work under pressure in a fast-paced environment., • Ability to work in a team environment to ensure customer satisfaction., • Attention to detail and exceptional follow-up skills. Work Experience: • 2+ years of work experience, preferably in the semiconductor capital equipment or related industry, but not required. Criteria: Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, • Ability to stoop, kneel, crouch, reach, walk, push, pull and grasp., • Ability to lift up to 25 lbs., • Ability to move arms, hands and fingers., • Required to have visual acuity to perform assigned tasks., • Ability to sit for sustained periods of time., • Required to wear personal protective equipment where applicable., • Subject to noise levels., • Ability to talk on phone and use computer for extended periods of time may be required. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job Description The CORE Institute team is dedicated to making the lives of others better by practicing exceptional patient care. If you would like to be part of a dedicated, dynamic healthcare team in a challenging, rewarding environment, The CORE Institute is the right place for you to grow your career. The CORE Institute delivers integrated, comprehensive musculoskeletal and neurological care. The CORE Institute is built upon a foundation of pioneering research, academics, community service, and a passion for excellence in patient care. The organization continues to be a leader in payor-reform initiatives, and it is at the forefront of systems-based quality programs which drive value and improve the quality of patient care. As The CORE Institute continues to grow, we are looking for a pool, Radiologist Technologist position for the OR. Please see below for the functions and requirements for this opportunity. ESSENTIAL FUNCTIONS: • Correctly identifies patient and corresponding exam. Obtains and documents patient history., • Demonstrates proper positioning, radiographic techniques, and cassette screen/grid combinations to ensure high quality examinations., • Practice standard precautions and maintain infection control standards., • Educate patient regarding procedures and related information., • Properly operate equipment as demonstrated by observation and audit., • Cleans equipment and stocks supplies as needed., • Demonstrate cooperative, positive and professional patient care and customer service., • Consistently maintain complete confidentiality of all medical, financial, employee, computer or other sensitive material which may jeopardize the privacy of others., • Perform and support quality assurance/CQI programs and processes., • Demonstrate commitment to organizational goals., • Attend all mandatory in-services and training., • Assist the Radiologist with Arthrogram procedures. Must demonstrate appropriate sterile procedure skills. Completion of Associates program in Radiologic Technology or Certification from a Credentialled Radiology School, with ARRT Certification. EXPERIENCE: Minimum of one year of previous experience. REQUIREMENTS: • Current State and ARRT licensure., • Current CPR certification., • Basic knowledge and understanding of PACS., • Must demonstrate excellent patient care skills., • Must demonstrate professional communication skills., • Proper equipment manipulation., • Ability to set techniques that follow ALARA. May occasionally be exposed to radiation, poor ventilation and fumes. PHYSICAL/MENTAL DEMANDS: Work requires standing and walking for extended periods of time. Requires lifting, pushing and pulling of approximately 50 lbs. ORGANIZATIONAL REQUIREMENTS • HOPCo Mission, Vision and Values must be read and signed., • OSHA Requirements and training to include:, • Safety Training

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S Companies is currently seeking a Civil Construction Inspector for our Phoenix office. You will be part of a team working on airport development projects. This position is diversified with opportunities to work at both general aviation and larger commercial service airports, and will allow you to interact with customers. The position will require travel to airports across Arizona. Opportunities to travel across the US to work with other C&S offices are available. This is a full-time position offering competitive compensation, great employee benefits and an outstanding work environment. Relocation assistance available for qualified candidates. Responsibilities include performing routine construction inspection services including acting as a liaison between supervisor and contractor, arranging material testing, conducting hands-on inspections, notifying supervisor of problems and deviations from plans and specifications, tracking quantities for payment, and completing daily reports. Required Knowledge/Skills/Abilities • 5-10 years of related experience, • Associates degree in related field, • Ability to maintain a daily job log and records, • Familiarity with and ability to interpret civil construction plans and specifications Desired Education & Experience • Airport construction experience (horizontal projects) highly desired, • Bachelor’s degree in related field, • Concrete and asphalt pavement inspection experience, • Underground drainage, utilities and electrical experience Estimated Compensation Range and Benefits $90,000 - $110,000/year* *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Matrix has been named a Zweig Group 2025 Best Firm to Work For! About Matrix: Matrix Design Group, Inc., an employee-owned planning, engineering, and environmental consulting firm is actively seeking a Senior Planner. As an employee-owned company we are committed to fostering, cultivating, and preserving a culture of diversity, respect and excellence. Our strengths of service, innovation, and skill are a result of that belief. We have a friendly, collegial, cooperative atmosphere and offer a full range of benefits including medical, dental, vision, disability and life insurance; holiday, vacation and sick leave; training and education; 401(k) and an Employee Stock Ownership Plan (ESOP). Matrix employees are encouraged to participate in employee wellness programs, social committees, and community outreach programs. We strive to employ highly motivated people with excellent communication and applied problem-solving skills who desire to advance their talents and skills. Salary Range: $95,000.00 to $115,000.00 Annually. Salary will be dependent upon experience. Locations: Colorado Springs, Denver, Phoenix, San Antonio or Remote. Summary: Matrix Design Group is seeking an experienced Senior Planner with demonstrated expertise in military compatibility planning, federal installation planning, and community planning. The successful candidate will serve as a Project Manager for planning projects, managing project financials, budgets, invoicing, progress reports, and subcontractor oversight. This role also requires active participation in business development activities including opportunity identification, proposal development, teaming agreements, and client presentations. This position focuses specifically on military compatibility planning, on-base federal planning, and community planning projects for federal clients. Essential Functions Project Management: • Manage multiple concurrent projects efficiently while identifying and addressing potential issues proactively, • Develop and monitor project budgets, schedules, and deliverables, • Direct and supervise subordinates, review work products, and prioritize competing deadlines, • Lead multi-disciplinary teams on complex planning projects, • Execute planning activities for diverse clientele including military installations, federal agencies, communities, and private clients, • Prepare technical documents, presentations, and planning products, • Conduct due diligence and research as required for projects, • Plan, schedule, and coordinate technical aspects of projects, • Manage public consultation programs and present findings to clients, • Lead marketing initiatives including strategic planning and opportunity identification, • Develop and present proposals to potential clients, • Support proposal pursuits, teaming agreements, and interview preparation, • Build and maintain strong client relationships Leadership & Mentorship: • Supervise and coordinate the work of other planning professionals, • Mentor junior and intermediate level planners, • Provide career development recommendations to team members Travel & Access Requirements: • Travel to project sites as needed, • Obtain and maintain access to federal facilities and military installations (security clearance may be required) Education and Experience: • Bachelor’s or Master’s degree in urban planning, engineering, operations research, data science or related field of study, • Minimum of 8 years of professional planning experience with progressive responsibilities, • At least 4 years of experience supporting federal or military planning projects, • Extensive experience in military facility planning and military programming, • Demonstrated project management experience including budget development, team leadership, and deliverable oversight Technical Skills • Advanced proficiency in MS Office Suite (Office 365), • Strong technical writing abilities for reports, proposals, and planning documents Knowledge Areas • DoD directives pertaining to land use planning, military missions, environmental planning, and real estate policies, • Military encroachment issues and mitigation strategies, • Community-military compatibility planning and coordination processes, • Planning principles related to community planning, land use planning, master planning, and environmental planning Core Competencies • Excellent written and verbal communication skills, • Strong interpersonal and relationship-building abilities, • Excellent organizational, planning, and prioritization skills, • Critical thinking and analytical skills for problem-solving, • Ability to facilitate community engagement and present to diverse audiences, • Creative problem-solving for complex, less well-defined planning challenges Preferred Qualifications • AICP certification, • Former DoD or military service experience, • Experience with federal contracting and procurement processes Additional Requirements • Valid driver's license and ability to pass the company's Motor Vehicle Record (MVR) check, • Ability to obtain required security clearances for federal facility access Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Physical Demands: While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms and talk and hear. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds and work in a moderate to noisy work environment. The noise level in the work environment is usually moderate. Matrix Design Group, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, gender, color, religion, sex, national origin, or protected veteran status, and will not be discriminated against based on disability. The expected salary range for this position is displayed in accordance with the Colorado Equal Pay for Equal Work Act. The final agreed upon compensation is based on individual education, qualifications, experience, and work location. Any applicant with a qualifying physical or mental disability who believes s/he requires a reasonable accommodation for any part of the application process should contact us at 719-575-0100 for assistance.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! As part of UCT's Service Division, you will be part of a dynamic organization that delivers critical cleaning and contamination control solutions to the semiconductor industry. UCT is looking for a talented 3rd Shift - Weekend Production Supervisor to join us in East Phoenix, AZ! Work Schedule: Friday - Sunday, 6:00 PM - 6:30 AM and Monday, 6:00 PM - 10 PM Job Summary:The Production Supervisor will be required to work in all the areas of production, supervising all aspects of the production operation within our Phoenix East facility. This position is a hands-on position within the production area. The Production Supervisor is required to spend 90% of his day on the production floor.Essential Duties and Responsibilities: • Supervise production personnel in the delivery of services, including parts cleaning, etching, and other specialized processes., • Develop and manage work schedules to ensure on-time delivery and meet customer expectations., • Hire, train, and develop staff members to ensure they have the necessary skills and knowledge to perform their roles., • Maintain accurate records and reports, including training and quality control documentation., • Troubleshoot and resolve production issues, working closely with engineering, quality, and other teams as needed., • Ensure a safe and clean work environment, adhering to UCT's safety and quality standards., • Manage and improve processes to achieve efficiency, quality, and customer satisfaction goals.Other Duties:, • Collaborate with internal teams to ensure seamless delivery of services and support., • Participate in continuous improvement initiatives to enhance processes and operations.Knowledge, Skills, and Abilities:, • Strong leadership, organizational, and communication skills., • Ability to work effectively in a fast-paced environment and prioritize multiple tasks., • Experience with quality control and process improvement methodologies., • Strong problem-solving and analytical skills.Educational/Certification Requirement:, • Associate's degree or equivalent experience in a related field.Experience Requirement:, • 2+ years of experience in a production or manufacturing environment, preferably in a parts cleaning services or high-tech industry. Criteria: Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Ability to climb, stoop, kneel, crouch, reach, walk, push, pull, and grasp, • May require standing for extended periods, walking, and lifting up to 25 lbs., • May be exposed to chemicals, noise, and other environmental factors., • Personal protective equipment (PPE) may be required., • Ability to stand for sustained periods of time., • Ability to lift up to 25 lbs., • Ability to move arms, hands, and fingers., • Work is performed primarily in a cleanroom or production environment., • Subject to hazards including electrical current, moving mechanical parts, exposure to chemicals and debris., • Required to wear personal protective equipment where applicable. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job DescriptionCompany Description Eurofins Scientific is a network of independent companies providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. With over 50 laboratories and more than 40 service centers nationwide, Eurofins Environment Testing provides full-service environmental analysis across all 50 states. Our network supports public and private clients—including DoD, DOE, and municipalities—through robust logistics and continuous investment in people, technology, and infrastructure. We offer comprehensive testing for air, water, soil, sediment, tissue, and waste, covering a wide range of analytes including PFAS, metals, VOCs/SVOCs, dioxins/furans, radiochemicals, and more. Job Description The Analyst I prepares and analyzes environmental samples using standard analytical techniques according to scientific and EPA methodology in compliance with Eurofins Environment Testing Quality Assurance programs and standard operating procedures (SOPs). Essential Duties and Responsibilities: • Demonstrates and promotes the company vision, • Regular attendance and punctuality, • Applies GMP/GLP in all areas of responsibility, as appropriate, • Responsible for general housekeeping in work area, • Works under close supervision using routine and standard methods, • Aliquots and weighs samples, • Washes glassware, • Conducts all activities in a safe and efficient manner, • Performs other duties as assignedQualifications, • Laboratory experience helpful, • Authorization to work in the United States indefinitely without restriction or sponsorship, • Reading, writing and speaking skills, • Problem solving skills, • Team participation and meeting management skills, • Time management and organization skills, • Use calculator/mathematical formulas and concepts, • Complete work within time and quality constraints, • Work independently following written or verbal instructions, • Cooperate and coordinate both orally and in writing Additional Information The position is full-time, Wednesday-Sunday, 8 a.m. - 5 p.m. with overtime as needed. Compensation range: $20 - $22 per hour depending on experience and qualifications. Position eligible for overtime pay. Eurofins Environment Testing (USA) provides a compensation range for informational purposes, the actual base salary may vary based upon, but not limited to, relevant experience and skill set, base salary of internal peers, business sector, and geographic location. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. We offer excellent full-time benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. We support your development! Do you feel you don’t match 100% of the requirements? Don’t hesitate to apply anyway! Eurofins companies are committed to supporting your career development. We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! We are well on our way to achieving our objective of carbon neutrality by 2025, through a combination of emission reduction and compensation initiatives. We encourage our laboratory leaders to make sustainable changes at their local level, and in addition to their initiatives we also count on our dedicated carbon reduction team to help us to achieve this goal! Find out more in our career page: Company description: Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure :40 the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in discovery pharmacology, forensics, advanced material sciences and agroscience contract research services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 35 years, Eurofins has grown from one laboratory in Nantes, France to 61,000 staff across a decentralised and entrepreneurial network of ca. 900 laboratories in 61 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2024, Eurofins generated total revenues of EUR 6.95 billion, and has been among the best performing stocks in Europe over the past 20 years. Eurofins is a M/F, Disabled, and Veteran Equal Employment Opportunity and Affirmative Action employer. Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Quality Manager to join us in Phoenix, AZ! The Quality Manager leads cross-functional efforts to ensure product and process quality across internal teams, suppliers, and customers. This role drives continuous improvement through data analysis, structured problem-solving, and implementation of robust quality systems. It manages compliance with ISO 9001 and other audit standards, oversees quality planning, and supports operational excellence by aligning performance metrics with business goals. The manager also directs a team responsible for inspection, issue resolution, and quality system maintenance. Essential Duties and Responsibilities: • First point of contact for product quality issues - expected to partner with Manufacturing, various Engineering teams, Purchasing/Materials/Supply Chain, Sales, and Operations management. Escalations to next level management as applicable based on severity of issue., • Develop and maintain quality plans for product, manage internal, customer, and supplier issues, enable robust quality product and predictable business processes., • Demonstrate skill in preventive quality engineering methods, data analysis, critical thinking, structured problem solving (8D), the use of metrics to identify opportunity, and business process improvement. Present performance and action plans to aligned goals & objectives during regular monthly reviews., • Business process improvement experience required – must demonstrate an ability to define and creatively implement quality business systems within the Operations teams. Maintain quality ISO 9001, SSQA, and other internal and external audit processes in alignment with company and customer requirements., • Develop, maintain, and support continuous Improvement efforts. This includes Interacting with customers in all levels. Suppliers and all UCT sites across Engineering, Operations, Quality, Customer Service/Support, and management., • Audit experience in product, process, and system audits., • Experience managing critical customer communication., • Experience with Lean, 6S, zero defect manufacturing processes, inspection methods and tools., • Bachelor’s degree in engineering, Quality, or other related field or equivalent experience., • Mechanical Engineering background is a plus. Work Experience: • 5 – 10 years’ experience in Engineering, Operations Quality & Reliability. Criteria: Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Ability to stoop, kneel, crouch, reach, walk, push, pull and grasp., • Ability to lift up to 25 lbs., • Ability to lift over 25 lbs. with assistance., • Ability to move arms, hands, and fingers., • Required to have visual acuity to perform assigned tasks., • Ability to sit for sustained periods of time., • Required to wear personal protective equipment where applicable., • Subject to noise levels in factory. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job DescriptionJob description Job Opportunity: Operational Improvement Leader – Maintenance & Reliability Why You Should Apply for This Job This role offers a collaborative work environment that values safety, excellence, and career growth. You’ll be part of a team that prioritizes employee input, encourages safe production practices, and supports continuous development through meaningful work and strategic impact. Work Environment This is a hybrid role with a mix of virtual and in-person collaboration. The position supports global operations from a main office, satellite locations, or remotely. The in-person component may take place at designated collaboration hubs or operational sites, and attendance frequency varies based on departmental needs. The region offers a favorable climate, outdoor recreation, cultural amenities, and major city conveniences—ideal for individuals who value a balanced lifestyle. Key Responsibilities • Establish tactical and strategic goals, objectives, policies, and procedures within assigned functional areas., • Collaborate with site and corporate teams to monitor operations and project performance., • Provide technical direction, interpret policies, and support regulatory compliance., • Identify and address operational deficiencies and recommend corrective actions., • Develop and manage budgets for improvement projects, including staffing and materials., • Lead assigned initiatives, from project planning and development to execution., • Coordinate with other departments and provide operational insights to leadership., • Evaluate infrastructure and systems for needed repairs or upgrades., • Support capital improvement planning and process optimization efforts., • Perform other related duties as assigned. Requirements Required Qualifications • High school diploma or GED with at least 7 years of operational or maintenance experience, including supervisory or management experience OR Bachelor’s degree with at least 3 years of relevant operational and leadership experience., • Strong understanding of cost control, efficiency improvement, safety, and environmental protection in industrial operations., • Familiarity with standard operating procedures and technical equipment., • Skilled in safety awareness and hazard recognition., • Excellent verbal and written communication skills., • Expertise in Root Cause Analysis (RCA)., • Strong knowledge of industrial processes (e.g., mining, plant operations, or manufacturing)., • Proficiency in developing training and technical documentation., • Proficient in Microsoft Office (Word, Excel, Outlook, PowerPoint)., • Proven leadership and interpersonal skills. Preferred Qualifications • Bachelor’s degree in an engineering field (Mechanical, Electrical, Reliability, etc.)., • 10+ years of experience in maintenance and reliability within process or fixed plant industries., • Background in copper hydrometallurgical operations., • Experience with SAP, CMS systems, Power BI, PI, and equipment downtime tracking tools., • Proficiency with RCA methodologies (TapRoot, Essential Factors, 5-Why, etc.)., • Understanding of Work Management processes (Identify, Plan/Schedule, Execute, Analyze)., • Competence in maintenance practices, processes, and reliability improvement methodologies., • Associate degree or trade certification in relevant fields. Additional Role Information • Success in this role requires strong relationship-building skills across cross-functional teams., • Must be comfortable leading meetings, presenting business cases, and aligning teams around strategic goals., • Up to 70% travel is required (domestic and international)., • The position supports operations across North America, South America, and Southeast Asia., • Relocation may be required based on proximity to operational sites. Compensation & Benefits • Estimated base salary range: $101,000 – $141,000 (based on qualifications and experience)., • Eligible for performance-based bonuses and other discretionary incentives., • Comprehensive benefits including:, • Medical, dental, and vision insurance, • Paid time off, holiday pay, and parental leave, • 401(k) with employer contributions, • Tuition assistance and career development support, • Life and disability insurance, • Employee Assistance Program and wellness benefits, • Internal advancement opportunities

Job DescriptionMatrix New World Engineering, a part of True Environmental and its partner firms, have united their strengths to establish the nation's premier environmental and engineering services consulting firm. This powerhouse organization offers an extensive range of services aimed at revolutionizing the built environment and preserving the natural one. Its diverse expertise encompasses environmental remediation, urban planning, engineering iconic coastal and marine structures, developing sustainable energy sources, and pioneering resource extraction methods. Explore further at and True-Environmental.com to discover the full scope of our capabilities. Matrix offers expertise in water resources; production well design, installation and testing; water system engineering; various water, pollutant, and land permitting; Environmental Site Assessments (ESAs); soil and groundwater characterization / remediation; petroleum leaking underground storage tank (LUST) site assessments; developing site assessment and remedial action plans; conceptual site model (CSM) development; design of drilling programs for installation of groundwater monitor wells and soil vapor extraction (SVE) wells; groundwater modeling; GIS and much more. Matrix has a new full-time opportunity in Phoenix, Arizona for a Senior Groundwater Modeler/Hydrologist to join our team of experthydrogeological and environmental consultants. The successful candidate will report to top Matrix leadership and will be responsible for developing, overseeing, and managing groundwater flow and solute transport modeling projects that address complex water resources and contaminant remediation challenges. This position requires technical expertise, outstanding communication skills and strong attention to detail.What you'll do • Develop and implement groundwater models to support water resources management projects, • Develop and apply solute transport models to support contaminant plume characterization and remediation projects., • Analyze hydrological models including storm water management modeling, aquifer test analyses, groundwater modeling and groundwater monitoring results., • Conduct risk assessments creating visual models and monitoring the quality and distribution of water., • Manage modeling aspects of larger projects and model-centric projects including developing and tracking scope, schedule, and budget., • Acquire, organize and analyze hydrogeologic and environmental field data., • Participate in field investigations (such as groundwater sampling, well installation, and pumping tests), help design field efforts and identify data needs., • Set up and execute mathematical models., • Perform quality-control checks on model input and results., • Participate in and lead project meetings, proposal preparation, report writing and presentations., • Develop statistical and graphical comparisons of model results and data., • Bachelor's degree in geology, hydrology, or environmental science, • Master’s degree in geology or hydrology preferred, • 10+ years in the hydrology field, with focus on groundwater modeling, • Proficient use of Microsoft Office Software Suite: Word, Excel, Access, PowerPoint, • Expert knowledge of groundwater modeling (analytical and numerical), including development of conceptual hydrogeologic models, • Deep experience in numerical model design, construction, calibration, and sensitivity analysis, • Experience using ArcGIS Desktop and/or QGIS working with geospatial databases, • Experience with MODFLOW and/or other groundwater flow and transport modeling codesPreferred Requirements, • Familiarity with inverse modeling using PEST and pilot point parameterization, • Strong communication, information technology, and data management skills, • Advanced proficiency in working with model datasets using text editors, spreadsheets, and computer programs, • Experience interpreting geologic, hydrogeologic and analytical data to develop and use conceptual hydrogeologic and predictive computer modelsAll qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base Pay Starts at $19.00 Per Hour Shift: Day shift, 5:00 AM - 1:30 PM DUTIES AND RESPONSIBILITIES • Glass cutter, • Assemble windows for customers by measuring and using hand tools, saws, punches and drills, • Maintaining safe/clean work environment and utilizing safe work practices in all job projects, • Assist production and open to being cross-trained, • Personal Protective Equipment (PPE) complianceQualifications 1-2 years’ experience in manufacturing, production, warehouse or construction experience preferred SKILLS & KNOWLEDGE • Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist, • Must be able to work in a fast-paced production environment and be quality conscious, • Daily commitment to safety, • Must have a desire and willingness to work and learn while understanding the importance of excellent attendance and a can-do attitude, • Reading a tape measure is required, • Ability to apply concepts to practical situations, • Read, write and communicate using English language sufficient to perform job function PHYSICAL & ENVIRONMENTAL DEMANDS • Ability to bend, twist, squat, reaches, grasp, stand, walk and perform fine manipulation with fingers, • Vision abilities to include close, distance, peripheral, color and depth differentiation, • Exposed to excessive noise, dust, fumes or chemicals on the shop floor, • Intermittently exposed to inclement weather, • Work overtime as needed, • Working in various departments Additional Information Our Location: 2225 S 75th Ave Suite 140 Phoenix, AZ 85043 Text "CASCADE" to ‪‪(602) 661-8304‬‬ to schedule your phone interview. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Hybrid work model, predominantly remote with 10% on-site in Phoenix, AZ. Candidate must currently reside in Arizona – no relocation allowed. Candidate must attend an in-person interview. Candidate must provide AZ Driver’s License as proof of residency. Candidate must work AZ time zone business hours. All work must be completed in the United States. Our direct client has an opening for a Quality Assurance Analyst # 8367. This position is for 12+ months, with option of extension, and will be worked in a hybrid schedule on-site in Phoenix, AZ 10% – however mostly remote. All work must be completed in the United States. If you are interested, please submit the following: YOUR CURRENT RESUME YOUR HOURLY RATE Rate Range is $40-45/hr W2 or $45-50/hr Corp to Corp Below is the job description – Resumes due ASAP – Resumes Due by Monday, October 13 Description: The Quality Assurance Analyst, Information Technology, is responsible for analyzing requirements to develop test plans, create test cases, and document application defects for internally developed software for both .Net and Oracle applications that are used by both ADOR business units and taxpayers for intermediate, medium-scale projects. Supervision: This position does not have direct reports. Essential Functions: % of Time Quality Assurance Testing • Creates test plans based on requirements documentation to ensure traceability and completeness of test coverage for basic to intermediate, medium-scale projects, • Designs detailed test cases for new applications or updates to existing applications, • Plans and performs testing by creating test data schedules in accordance with project scope or delivery dates, • Defines regression test plans and test cases for future projects, • Performs retests and rework, as necessary, • Documents test procedures to ensure replicability and compliance with standards 40% Support • Documents results of identified application defects or usability issues, • Identifies process improvement needs and assists management on implementing changes to improve efficiency and productivity, • Develops Quality Assurance documentation on processes and standards to be used by the QA team and shares knowledge with team members including cross training, • Adheres to Project Management Lifecycle and TFS standards and other IT and/or QA team processes 20% Requirements Gathering • Participates in requirements gathering and technical analysis to ensure completeness of documentation needed to accurately perform testing, • Works with business analysts and stakeholders to understand functional requirements 15% Agency/Department Compliance & Continuous Improvement • Remains current on all laws, regulations, policies, and best practices related to taxation through regular engagement in activities such as: self-directed research, conferring with other practitioners and technical experts; subscriptions to regulatory/legal/industry newsletters and briefs; membership industry associations and attendance at meetings/events; and or participation in training and others continuing education opportunities., • Actively contributes to team and individual effectiveness through the following: -, • Attends staff meetings and huddles of work unit or district; and may cascade and track information as indicated, • Completes all required training in a timely manner., • Participates in assigned work teams as appropriate., • May complete periodic metrics, projects, huddle boards and reports as requested., • Prepares for and actively participates in 1:1 coaching with supervisor, • Maximizes work processes and deliverables through lean principles within the Arizona Management System (AMS); and provides recommendations for process improvement, and engages in continuous improvement efforts as assigned. 20% Other duties as assigned 5% Requirements Education & Experience • Any combination that meets the knowledge, skills and abilities (KSA); typical ways KSAs are obtained may include but are not limited to: a relevant degree from an accredited college or university such as Bachelor’s Degree (e.g., B.A.), training, coursework, and work experience relevant to the assignment., • Minimum of two years' experience in quality assurance testing and analysis Knowledge/Understanding • Knowledge of quality assurance software testing tools and methodologies, • Knowledge and understanding of software development processes, including requirements and technical design analysis, development, system and user testing, problem resolution, and planning Skills • Effective verbal, written, and listening communication skills, • Effective organization and time management skills with the ability to manage multiple projects simultaneously and work in high-pressure situations, • Effective interpersonal skills and demeanor, • Effective in the skill of synthesizing feedback and adjusting accordingly, • Proficient in the use of a PC in a Windows environment; in the use of the Internet; in the use of MS Office Applications such as Outlook, Word and Excel, PowerPoint; and in the use of Google Suite applications such as Gmail, Sheets, Docs, and Drive., • Proficient in the use of systems such as Google Suite, TFS, Azure DevOps, and Altova Abilities • Ability to clear a comprehensive background and clearance process that includes an Arizona tax compliance verification, and a criminal background check through the FBI via level one fingerprint clearance through the Arizona Department of Public Safety, • Ability to work both independently and collaboratively as part of a team, • Ability to work in a confidential manner, ensuring information is shared with internal and external individuals in an appropriate manner, • Ability to learn LEAN concepts, principles and tool, • Ability to understand and solve problems by applying intermediate analytical skills to include collecting all the relevant information and data needed to address the problem; organizing, classifying and synthesizing the data into fundamental issues; from the information, identifying the most probable causes of the problem; reducing the information down into manageable components; identifying the logical outcomes from the analyses of the data collected; and, identifying the options and solutions for addressing the problems analyzed., • Willingness and ability to embody ADOR’s core values of Do the Right Thing, Commit to Excellence, and Care About One Another Additional Job Demands • In the course of performing the essential duties one must be able to exert up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects., • No substantial exposure to adverse environmental conditions (such as in typical office or administrative work.) Selective Preferences • Bachelor’s Degree in Information Technology, Computer Science, or a related field

Job DescriptionCompany Description Eurofins Scientific is a network of independent companies providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work to ensure the products they supply are safe, their ingredients are authentic, and labelling is accurate. Eurofins is dedicated to delivering testing services that contribute to the health and safety of society and the planet, and to its corporate responsibility to protect the environment and ensure diversity, equity, and inclusion across the entire network of Eurofins companies. With over 50 laboratories and more than 40 service centers nationwide, Eurofins Environment Testing provides full-service environmental analysis across all 50 states. Our network supports public and private clients—including DoD, DOE, and municipalities—through robust logistics and continuous investment in people, technology, and infrastructure. We offer comprehensive testing for air, water, soil, sediment, tissue, and waste, covering a wide range of analytes including PFAS, metals, VOCs/SVOCs, dioxins/furans, radiochemicals, and more. Job Description Eurofins Environment Testing is searching for a Sample Receiving Technician I in Phoenix, AZ. Logs and tracks the receipt and shipment of all samples into and out of the laboratory and verifies receipt of samples. Assists in preparing bottle kits for delivery to clients and ensures accurate and timely documentation of sample log in, labeling, and routing. Determines the priority level and appropriate testing procedures of samples according to Chain of Custody as well as labels and stores samples in accordance with documented procedures. Additionally, the Sample Control Technician I may be responsible for pick-up and delivery of samples as well as additional customer service, driving, or courier duties as necessary to support laboratory and client needs. Sample Control Technicians will also be responsible for proper disposal of samples and waste in accordance with all applicable procedures. Essential Duties and Responsibilities: • Receives and unloads incoming samples or consignments in accordance with DOT regulations and verifies receipt against Chain of Custody (COC), matches it to the corresponding quote and notes discrepancies daily. Verifies that COC’s are accurate, complete, and correct and seeks resolution for those that are not., • Logs samples into Lab Management System daily to assign a lot number for tracking purposes and distributes paperwork to Project Managers., • Labels samples so they may be identified by the lot number assigns and delivers samples to appropriate labs for analysis daily., • Prepares bottle kits daily to be shipped to clients to collect samples and return for analysis in accordance with established procedures including EPA and DOT requirements., • Forwards samples to other laboratories in accordance with DOT regulations as needed to run tests that are not performed at that location., • Disposes of spent samples, waste and other potentially hazardous materials in accordance with established procedures., • Monitors freezer and cooler temperatures daily to confirm that the readings are within SOP guidelines., • Cleans and organizes the department daily to promote a clean, safe work environment and smoother flow of daily operations., • Maintains and promotes safety and conducts all operations in a safe and environmentally compliant manner., • Stocks and supplies inventory daily and assists with inventory of supplies to maintain proper quantity of materials to perform tasks appropriately., • Performs splits and composites as needed upon request., • May perform courier duties as necessitated to support lab and client needs., • Will be compliant with all driver procedures, certification, and Company driver policies., • Must be willing to be on-call during non-business hours in order to perform non-routine sampling and delivery., • Assists in maintenance of walk-in coolers to facilitate locating samples., • Ships empty coolers back to clients and other Eurofins Environment Testing America Laboratories. Logs all outgoing coolers in order to maintain a detailed inventory of all coolers., • Maintains all company vehicles for sample pickups and deliveries as needed., • Conducts all client interaction in an appropriate and professional manner., • Other job duties as determined by local management.Qualifications, • High school diploma or equivalent, • Valid state issued driver's license to operate company vehicles, • May drive for long periods, up to 8 hours per day., • Authorization to work in the United States indefinitely without restriction or sponsorship, • Professional working proficiency in English is a requirement, including the ability to read, write and speak in English Additional Information Position is part-time, Monday to Friday, 8:00am - 12:00pm with possible overtime and weekends as needed. The compensation range for this position is $20.00 - $22.00 per hour depending on level of experience. Eurofins Environment Testing (USA) provides a compensation range for informational purposes, the actual base compensation may vary based upon, but not limited to, relevant experience and skill set, base compensation of internal peers, business sector, and geographic location. What we Offer: • Excellent full-time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match We embrace diversity! Eurofins network of companies believe in strength and innovation through diversity, being an Equal Opportunity Employer. We prohibit discrimination against employees or applications based on gender identity and/or expression, race, nationality, age, religion, sexual orientation, disability, and everything else that makes employees of Eurofins companies unique. Sustainability matters to us! We are well on our way to achieving our objective of carbon neutrality by 2025, through a combination of emission reduction and compensation initiatives. We encourage our laboratory leaders to make sustainable changes at their local level, and in addition to their initiatives we also count on our dedicated carbon reduction team to help us to achieve this goal! Find out more in our career page: Company description: Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in discovery pharmacology, forensics, advanced material sciences and agroscience contract research services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 35 years, Eurofins has grown from one laboratory in Nantes, France to 61,000 staff across a decentralised and entrepreneurial network of ca. 900 laboratories in 61 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2024, Eurofins generated total revenues of EUR 6.95 billion, and has been among the best performing stocks in Europe over the past 20 years. As a Eurofins employee, you will become part of a company that has received national recognition as a great place to work. We offer excellent full-time benefits including comprehensive medical coverage, life and disability insurance, 401(k) with company match, paid holidays, paid time off, and dental and vision options. Eurofins USA Environment Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior PlannerLocation - Any Office LocationJob Type – HybridRequisition ID - 11025 The primary duties of the Senior Planner will be to direct multi-discipline teams to execute planning, programming, and asset management projects and produce report deliverables that are in compliance with Federal, DoD, and Client guidance criteria. Position requires a motivated individual, with exceptional communication skills, as the successful candidate will lead charrette workshops to facilitate stakeholder participation to obtain client’s planning, programming, and other mission requirements. Candidate to be highly knowledgeable with UFC 2-100-01 Installation Master Planning, Federal programming requirements and budgeting (FSRM, MILCON, etc.) process, DD 1391, space utilization studies, and ability to direct team how to develop and provide typical planning report deliverables. In addition, the ability to assist with preparation of technical proposals to win planning projects is required. The location of this position is negotiable, as our company has many locations across the country. This position has a high potential for career advancement.What You Will Be Doing: • Coordinate, lead and execute a range of military master planning task orders to include Master Plans, Area and Installation Development Plans, Vision Plans, Real Property Master Planning, Land Use Studies, and similar planning work for current and future Federal and DoD clients. Help prepare and negotiate Task Orders with clients, schedule and coordinate the work, lead the team in successfully executing the Task Order., • Identify and build relationships with potential new clients and sustain and strengthen existing client relationships to facilitating dialogue, partnering and potentially secure more military planning projects and programs across a range of US Government entities to include but not limited to USACE Districts, NAVFAC, and Base Planners at military installations., • Supporting Business Development and technical staff as required for proposals and plan development.Required Qualifications:, • Proficient in preparation of UFC compliant Military Master Plans specifically to Air Force, Army, Navy, Marines, Army Reserve, National Guard, and Coast Guard standards and requirements, • Consummate knowledge of Military Master Planning principles and UFC 2-100-01 requirements (i.e Vision Plans, Regulatory Plans, Capacity Plans, Form-Based Planning), Real Property Plans, Installation and Area Development Plans, Nodal Development Plan, Customer Concept Document, Planning Charrette Report (PCR) Levels I and II, Sustainability Component Plans, Space Utilization/Allowance, Facility Requirements Analyses, Programming Level Cost Estimates, and DD Form 1391 Development., • Lead and facilitate a Planning Charrette Workshop. Develop and present oral and graphic presentations to client including In-Briefs, Out-Briefs, Summaries and other planning documentation., • Develop, propose, negotiate, schedule, plan and lead execution of military master planning with in-house technical and subcontract staff., • Self-perform, as well as lead planning and other support staff in the preparation of Exhibits, Geographic Information Systems maps and documents, CADD documents, and related master planning requirements. Experience with Esri products (ArcGIS Pro, Portal) and Autodesk’s AutoCAD Civil 3D, • Excellent technical writing skills and experience with Microsoft office software (Word, PowerPoint, and advanced use of Microsoft Excel are preferred) and Adobe Suite (InDesign, Illustrator, Photoshop, Acrobat)., • Creative problem-solving skills to gather relevant information to solve less well-defined planning problems, • Ability to work on several projects or issues simultaneously, and manage time effectively and meet firm deadlines, • 8+ years of Military Master Planning experience, • American Institute of Certified Planners (AICP) certification, • Degree in Planning, Geography, Architecture, Landscape Architecture, or Engineering. Other degrees will be considered., • Ability to acquire background clearance sufficient to gain entry to military installations and/or controlled access facilities or work the project/program., • Ability to pass a security / background check and security clearance investigation. This position will require a US Passport and the ability to travel domestically and internationally as needed.Preferred Qualifications:, • Licensed Professional Landscape Architect (PLA / RLA). Ability to provide and sign full landscape architecture design deliverables, • United States Green Building Council (USGBC), Leadership in Energy and Environmental Design (LEED) Accredited Professional, • Project Management experience, • Member of the American Planning Association – Federal Planning Division We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionWastewater Project Engineer - Greater Phoenix Area - Wastewater Experience Required - Great Pay & Benefits This Jobot Job is hosted by: Dallas Gillespie Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $90,000 - $128,000 per year A bit about us: We are a leading general engineering contractor with a specialization in the construction, renovation, and expansion of water and wastewater treatment facilities. Having been established, we take pride in having completed over 300 projects for both private and public sectors across the Southwest. Why join us? Excellent Benefits! Pension Plan Medical/Dental/Vision/Life Insurance FSA Generous Paid Time Off, Paid Holidays, Sick Time Company Gym Membership And More! Job Details Job Details: Our company is seeking a dynamic, innovative, and experienced Permanent Project Engineer to join our growing Wastewater Treatment Plant Construction team. This is a unique opportunity to apply your skills and knowledge in wastewater treatment processes and systems to address complex challenges in the construction industry. As a Wastewater Project Engineer, you will play a pivotal role in designing, managing, and implementing comprehensive wastewater treatment projects. This role demands a strong technical background, excellent project management skills, and the ability to communicate effectively with clients, team members, and stakeholders. Responsibilities: 1. Coordination of the engineering & construction processes of wastewater treatment facilities and systems., 2. Collaborate with multidisciplinary teams to develop effective and sustainable wastewater treatment solutions., 3. Conduct feasibility studies for proposed projects, including cost estimates, resource allocation, and timeline projections., 4. Apply your knowledge of wastewater treatment processes and regulations to ensure compliance with local, state, and federal guidelines., 5. Coordinate with contractors, consultants, and clients to ensure smooth project execution and completion., 6. Prepare technical reports, specifications, and drawings for wastewater treatment systems and processes., 7. Troubleshoot and resolve issues related to wastewater treatment systems., 8. Keep abreast of advancements in wastewater treatment technologies and processes to ensure the company's competitive edge., 9. Promote safety standards and practices within the work environment. Qualifications: 1. Bachelor's degree in Civil, Environmental, or Chemical Engineering, or a related field., 2. Minimum of 1 years of experience in the design and management of wastewater treatment projects in the construction industry., 3. Professional Engineer (PE) license is preferred., 4. Proficiency in wastewater treatment processes such as activated sludge, anaerobic digestion, nutrient removal, disinfection, and solids handling., 5. Strong knowledge of local, state, and federal regulations related to wastewater treatment., 6. Excellent project management skills, including the ability to manage multiple projects simultaneously., 7. Proficient in using engineering software such as AutoCAD, Civil 3D, or similar., 8. Exceptional communication and team collaboration skills., 9. Ability to solve complex problems and make sound decisions based on engineering principles., 10. Commitment to sustainable practices and a keen interest in environmental preservation. Join us on this exciting journey as we strive to make a positive impact on our environment and communities through innovative wastewater treatment solutions. If you're a seasoned Wastewater Project Engineer looking to take your career to the next level, we'd love to hear from you. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.Jobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values.\r\n\r\nFounded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA).\r\n\r\nReady to find a good job? Create your profile today at Jobot.com.

Job Description The CORE Institute team is dedicated to making the lives of others better by practicing exceptional patient care. If you would like to be part of a dedicated, dynamic healthcare team in a challenging, rewarding environment, The CORE Institute is the right place for you to grow your career. The CORE Institute delivers integrated, comprehensive musculoskeletal and neurological care. The CORE Institute is built upon a foundation of pioneering research, academics, community service, and a passion for excellence in patient care. The organization continues to be a leader in payor-reform initiatives, and it is at the forefront of systems-based quality programs which drive value and improve the quality of patient care. As The CORE Institute continues to grow, we are looking for Pool, Anesthesia Technicians/ORAs for the OR. Please see below for the functions and requirements for this opportunity with The CORE Institute Specialty Hospital. ESSENTIAL FUNCTIONS: • Performs room turnover between cases in an efficient manner, following Universal Blood and Body Fluid (UBBF) precautions and utilizing Personal Protective Eyewear (PPE)., • Performs terminal cleaning of OR suites following a predetermined schedule on a rotational basis using PPE and following UBBF Guidelines., • Maintains the cleanliness, orderliness, and appearance of substerile rooms and scrub sink areas., • Monitors the surgery schedule and watches par levels in supply and patient care areas., • Communicates to Materials Management/Buyer regarding the need for additional supplies and assist in the restocking of those areas., • Practices safe working methods and universal precautions, utilizes PPE to avoid injury to self and others., • Is familiar with precautions and handles hazardous material in such a way to protect self and coworkers., • Is familiar with the principles of Aseptic Technique and maintains a safe distance from the sterile field when performing job functions in the OR environment., • Dons appropriate surgical attire within the semi-restricted and restricted areas of the OR which includes surgical scrubs, hair covering, and masks where indicated., • Understanding of traffic patterns is displayed., • Promotes cost containment by utilizing equipment and supplies in a cost-effective manner., • Assists in the safe transfer and transport of patients using proper body mechanics., • Assist with patient positioning under the direction of an RN or Physician., • Maintains patient privacy and confidentiality., • Provides anesthesiologist support as a physician extender and part of the patient care team., • Is familiar with anesthesia machines and is responsible for maintaining proper working order of the machines., • Performs any other duties assigned., • One year of EVS experience required., • Good organizational skills., • Pleasant disposition., • HOPCo Mission, Vision and Values must be read and signed., • OSHA Requirements and training to include:, • Safety Training

Job Description When you join Groundwater & Environmental Services, Inc. (GES), you are not a number – you become the reason for our success. You’ll have the opportunity to carve your own career path while working shoulder-to-shoulder with some of the most talented and dedicated professionals in the industry. By combining our unique talents and expertise, we help the world’s leading organizations solve their most complex environmental challenges. We work hard, and we have a lot of fun while we’re at it. Our core values are centered on doing what’s right – for our clients, our employees, and our community. Our employees benefit from a supportive, collaborative culture and an entrepreneurial spirit that promotes new ideas and shared learning. We know that there is life to be lived beyond work. That's why we offer our employees a comprehensive benefits package and champion a culture that embraces work/life balance. Employee benefits are available to regular full-time and part-time employees in accordance with our company policy. At GES, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, gender, pregnancy, national origin, age, disability, marital status, sexual orientation, gender identity or expression, military and veteran status, and any other characteristic protected by law. Environmental Seller Doer/Consultant Groundwater & Environmental Services, Inc. (GES), an industry leader with a reputation for excellence in providing environmental consulting, engineering, compliance, and technical field services to clients in diverse market sectors, seeks a Seller Doer/Consultant to support the growth of environmental projects throughout GES. Location: GES prefers this role be located near our office in Phoenix, AZ, however, can be remote or hybrid. Revenue Target: Our selected candidate will identify and grow new client relationships with oil & gas, industrial, power & utility, and/or commercial clients across regional service area and support growth of existing clients and collaborative team members. Year 1 revenue expectations for this role: $100,000 to $200,000 in net revenue across various markets and services execution. 2nd year expectations of >$500,000 in booked net revenue. Responsibilities: • Applies industry knowledge to lead initiatives that support environmental service line growth, sales, program management, and project execution., • Sell/Win, Direct and Perform work associated with environmental permitting which may include stream cross sections, long profiles, BEHI/NBS, and/or other environmental sampling (chemical and biological)., • Sell/Win, Direct and Perform Stream Assessment (perennial/intermittent/ephemeral), Stream Reach Condition Studies., • Sell/Win, Direct and perform work associated with 401/404 Permitting Documents and Agency Coordination, • Familiar with local, state and federal water quality laws (CWA, RHA Section 10, ESA, NHPA, NEPA, etc.), • Exposure to or use of Rosgen Natural Channel Design (Levels I, II, III or IV) and other principals of Natural Channel Design., • Perform HEC/HEC RAS modeling and prepare and submit FEMA CLOMARs/LOMARs, a plus, • Develop plans and full plan sets for NCD projects for IRT, State, and local level approvals, • Familiarity with local permitting process for development projects, • Cross-sell services for permitting, site characterization & remediation, PFAS and Emerging Contaminant Consulting, Ecological Services, including various mitigation credit offset programs, Vapor Intrusion, mitigation, and management, Air Quality, Brownfields services for developers and legal firms, etc., • Supports program & project management for high visibility / large-scale projects, including project definition, assessment, permitting, data management, and compliance support., • Manages the development, negotiation, and administration of environmental related contracts., • Leads bid and proposal preparation for environmental opportunities, working closely with GES' operational and technical leaders applying GES’ financial standards and operational processes to ensure highest quality GES submittals., • Conducts sales presentations and informational seminars for potential clients, including participation in industry trade organizations, publication of thought leadership papers in technical publications and industry groups (i.e. ITRC, SURF, etc.), • Generates leads and develops new business opportunities through networking of existing and prospect clientele and industry relationships Requirements: • Must work in a collaborative environment with other business development, sector, program, and operational leaders. Team Player mentality is essential., • Willingness to travel as needed to support business needs including industry trade shows, events, and technical meetings locally and nationally., • A Bachelor’s degree or higher in Environmental Science, Ecology, Geology, Environmental Engineering or related field., • 15+ years of industry experience with 5+ years of experience generating leads, creating proposals, conducting sales presentations, meeting sales goals, and directing project work execution., • Must possess excellent communication and technical writing skills., • A proven record of accomplishment with client development and revenue generation, as well as have established industry and regulatory contacts., • Professional certification or license is a major plus. (PE, PG, CPG, PhD, etc.). Our comprehensive benefits include: medical, dental, vision, prescription card, 401k, FSA, LTD, STD, New Parent Leave, 529 College Bound Fund, Tuition Assistance, Bonus Plan, and more. Groundwater & Environmental Services, Inc. (GES) believes that diversity and inclusion among our staff is critical to our success, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool. At GES, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, gender, pregnancy, national origin, age, disability, marital status, sexual orientation, gender identity or expression, military and veteran status, and any other characteristic protected by law.

Job DescriptionCompany Description We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us — and will continue to allow us — to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description Our Site Design team provides design services for retail, commercial, mixed-use, and residential land development projects, along with industrial, sports, schools, and other site development types. As a civil engineering student intern, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of our team, working for our clients on projects with our most experienced engineers. You'll assist with creating construction plans for sites that can include site layout, grading, stormwater, and utilities in AutoCAD and Civil 3D. You may also perform research, write technical reports, and travel to job sites. Qualifications You are passionate about: • Working collaboratively with others., • Having ownership in the work you do., • Using your talents to positively affect communities. You bring to the team: • Strong communication skills., • Ability to contribute and work well on a team., • Proficiency in Microsoft Excel, Word, and Outlook., • Problem-solving and decision-making skills., • Strong attention to detail., • Working knowledge of AutoCAD (Civil 3D is a plus)., • Pursuing a degree in civil engineering. #LI-DNI Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: • Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP), • Engage in work that has a positive impact on communities, • Receive an excellent 401(k) match, • Participate in a wellness program promoting balanced lifestyles, • Benefit from a bonus system that rewards performance, • Have the possibility for flexible work arrangements Please note: The benefits listed above apply to full-time employees. If you're applying for an internship, you can learn more about internship-specific offerings and experiences at Olsson by visiting . Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Sr Director of Operations to join us in Phoenix, AZ! The Senior Director of Operations provides leadership and oversight for either single or multi-site operational execution within UCT Services, reporting to the Managing Director of Operations. This role ensures consistency, discipline, and alignment in safety, quality, delivery, cost, and people development (SQDCP). The Senior Director will drive operational excellence across assigned sites, standardize processes, and support the execution of UCT’s strategic objectives, while maintaining strong customer satisfaction and operational scalability. Essential Duties and Responsibilities: Strategic & Organizational Leadership • Translate UCT’s corporate and regional strategies into actionable execution plans for assigned sites., • Lead and mentor site Operations and their teams, ensuring clarity, accountability, and alignment., • Facilitate cross-site collaboration, sharing best practices and driving adoption of standard operating systems., • Oversee daily operations across multiple sites, including production, engineering, facilities, EH&S, logistics, and administrative functions., • Ensure compliance with operational policies, procedures, and leader standard work., • Implement and maintain KPIs, tier boards, and daily management systems to monitor performance and drive corrective action., • Ensure readiness for customer qualifications, audits, and escalations across sites., • Partner with commercial and engineering teams to enable smooth introduction of new business., • Build and sustain high-performing site leadership teams through coaching and performance management., • Foster a culture of safety, accountability, and continuous improvement., • Drive implementation of KPIs and visual management tools, enabling teams to own and understand their performance., • Strong leadership and people development skills, with proven ability to manage through influence across multiple sites., • Deep knowledge of semiconductor/capital equipment industry operations, including manufacturing, safety, quality, and engineering., • Financial acumen with ability to connect operational actions to P&L outcomes., • Skilled in problem-solving, standardization, and deployment of lean methodologies. Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Ability to kneel, reach, walk, push, pull and grasp., • Sit or stand for sustained periods of time., • Ability to move arms, hands and fingers, • Lift up to 25 lbs. Ability to move arms, hands and fingers., • Required to wear personal protective equipment where applicable., • Subject to hazards including electrical current, moving mechanical parts and exposure to chemicals., • Work may require out of town travel depending upon assignment (training and meeting) 10 %. At Ultra Clean Technology, we do not just welcome diversity - we celebrate it! Ultra Clean Technology is proud to be an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.

Job Description About BFL Construction Founded in 1973, BFL Construction has a diverse portfolio of projects within the Institutional, Non-Profit, Commercial, Education, Health & Biomedical, Industrial, and Multi-Family space and is part of the JV Driver portfolio of companies. As a specialist in construction management, we provide complete oversight of each project from preconstruction to close-out and ongoing services through the warranty period. Urban Metro Builders Inc. (Company) is a division of BFL Construction and specializes in multi-family and single-family residential projects. What we Offer We are committed to the well-being of our employees and offer a competitive salary and a well-rounded benefits package, including 401k contributions, health and dental benefits, and paid time off. We fully support the growth of our team and have formal and informal training/development opportunities to help you succeed in your role and meet your aspirations. We have an Impact committee that focuses on mental health, community involvement and environmental footprint. In addition, we conduct annual employee engagement surveys and take steps to continuously strengthen our employee experience. Summary We are seeking a highly motivated and detail-oriented individual to join our team as Accounting Manager. Reporting to the VP Finance, you will be responsible for supporting the financial operations of the company by assisting in the preparation of financial statements, managing financial data, and ensuring compliance with regulatory requirements. Roles & Responsibilities • Support, coach and mentor the finance team with day-to-day direction., • Analyze financial data and provide insights and recommendations to support business decisions., • Assist in the preparation of annual budgets and forecasts., • Review and reconcile general ledger accounts to ensure accuracy., • Collaborate with internal teams to ensure timely and accurate financial data, • Take ownership of the month-end close process, ensuring the accuracy, timeliness, and compliance of financial reporting., • Prepare Accurate Working Papers and Account Reconciliations:, • Prepare bank reconciliations, • Manage full-cycle accounting responsibilities, including status of contracts, sub-ledger reconciliations, general ledger analysis, and key balance sheet account reconciliations., • Review and approve daily/weekly EFT batch payments., • Post journal entries, such as overhead, accruals, prepaids, and adjustments, maintaining accuracy and completeness in all entries., • Prepare monthly & quarterly tax filings., • Analyze and interpret variances in income statements and balance sheets, providing clear explanations to support decision-making., • Regularly reviews accounts payable and accounts receivable ledgers. Qualifications • Bachelor’s degree in accounting, Finance, or related field., • CPA designation or working towards CPA., • Minimum of 2+ years of experience in accounting or finance., • Strong knowledge of accounting principles and standards., • Proficiency in Microsoft Excel and accounting software (e.g., QuickBooks, SAP)., • Excellent analytical and problem-solving skills., • Attention to detail and high level of accuracy., • Strong organizational and time management skills., • Ability to work independently and collaboratively in a team environment., • Excellent communication and interpersonal skills., • Preferred Qualifications:, • Experience in public accounting or auditing., • Knowledge of financial reporting standards (e.g., GAAP, IFRS)., • Familiarity with ERP systems and financial modeling software., • Ability to adapt to evolving technology and systems. With a career at BFL Construction, you will participate in a growing portfolio of diverse and exciting projects. Each day with BFL brings another opportunity to develop and broaden your skills and experience. For further information, visit . BFL Construction Group strongly encourages diverse candidates to apply to our welcoming and included.

Job DescriptionAbout Us Connected International, Inc. (Connected Cannabis Co.) is a leading vertically integrated cannabis company based in Sacramento and operating in California, Arizona, and Florida. With over 11 years experience, Connected specializes in breeding, growing, manufacturing, and distributing top-shelf cannabis through its state-of-the-art facilities and proprietary genetics. With over 250 employees across the United States, Connected maintains a strong presence in the industry across multiple markets. The company has recently expanded into Arizona and Florida with ambitious national expansion plans underway. Connected's mission has always been to breed, grow, and sell the best cannabis in the world, setting high standards for its products, people, and partners wherever we go. About the Job The Cultivation Technician performs labor to assist in the upkeep, stocking, and fulfillment of growing cannabis, including, but not limited to; watering, feeding, flushing, pruning, washing, cloning, transplanting, harvesting, and facility maintenance under the supervision of the Cultivation General Manager. Attention to detail is extremely important. This position will be the point person for Cultivation equipment preventative maintenance and checks, including filter changes, sensor checks, and other routine checks. What You Will Do • Perform all tasks in the indoor harvest grow, • Be point person for HVAC preventative maintenance and checks, and equipment checks, • Mother plant maintenance, cloning, transplanting, nutrients and pH management, water management, positive airflow, temperature and humidity control, pest and disease control, IPM program implementation, plant transfer from veg to flowering., • Manage plant scheduling and organization to precisely project all plant needs on a daily, weekly, and monthly basis to produce the best results for maximum plant yield., • Cataloguing and maintaining organization of plants, tags, and pruning biomass, • Knowledge of pest and disease control management a plus., • Maintain and follow the cultivation department policies and procedures., • Wash and sanitize all equipment. Scout all equipment, ensuring all tools are free of pests, viruses or disease., • Must be able to adapt to various strains, styles and types of cannabis they are cultivating; adjusting techniques to maintain a steady pace and quality., • Breakdown flowers off stem and stalk of plant to separate unusable waste from useable product; employee must track the amount of unusable waste for each batch., • Knowledge or experience with METRC compliance is a plus., • Demonstrate accurately and thoroughly in a timely manner to meet production standards., • Work in a timely manner and strive to increase productivity., • Maintain organization and cleanliness of the cultivation facility while performing job duties., • Exhibit competency in basic organizational, tracking and communication skills., • Works in a timely manner to efficiently meet goals while consistently producing quality product., • Employee must be able to follow basic instructions and take constructive feedback from their managers to maintain quality standards and production goals., • Employee must show up on time for work every day ready to work., • Employee must exhibit personal hygiene and follow the health guidelines set forth by the company and the state while processing patient medicine., • Cultivation staff is responsible for clean-up of all processing areas and equipment at the end of every shift. What We Are Looking For, • Minimum age of 21 years or older and pass a criminal background check, • High school or equivalent, • May require working rotating shifts with varied hours/day, including evenings, weekends, holidays, and special events, • Previous agricultural/warehouse/manufacturing/laborer experience preferred., • Adhere to company mission statement, while maintaining high ethical standards and professionalism., • Ability to be flexible and work in various sectors of the department as needed an/or requested by their direct supervisor; this may include but is not limited to, helping grow staff with small tasks, cleaning and/or moving supplies and equipment and/or helping the packaging department or working at other locations as needed., • Must be able to identify various problems with any strain/product and communicate with direct supervisors as necessary., • Have a basic understanding of cannabis laws, rules and regulations set forth by the state; a pursuit to further their understanding and knowledge of the industry and the laws is appreciated and commendable., • Must work well with others and ability to adapt quickly to changes in policy, procedure, methods and technique. Frequent contact with supervisor via face-to-face discussions, • Use of independent judgment regarding product processing, keeping quality, projections and goals in mind., • Help create a proactive and positive environment; a positive attitude and self-motivation to help produce high quality manicured product, while meeting and/or exceeding personal and/or company goals., • Ability to work with, help, guide, challenge and motivate other team members to create a cohesive unit., • Must manage their time during work efficiently to meet goals while consistently producing quality product., • Must be able to follow basic instructions and ability to take constructive criticism from their managers to maintain quality standards and production goals., • Must understand and implement the rules, regulations, policies, and procedures of the company and the cultivation department., • Fundamental knowledge, as well as the ability to be taught and guided in areas related to cultivation with other areas being taught as the employee shows interest while still maintaining their capabilities as a cultivation technician., • Skill in analyzing potential problems with a plant or the product being processed., • Shows self-motivation/innovation and the ability to work well with all members of their staff and the company, as well as with their direct supervisor., • Ability to listen well and communicate effectively various audiences, especially with the direct supervisors and other co-workers., • Other duties as assignedPhysical Requirements/Work Environment, • Must be able to lift up to a maximum of 50 lbs. occasionally without assistance or 100 lbs. with assistance., • Regularly required to perform carrying, grasping, lifting, walking, standing, some bending/crouching, stooping, stretching, talking, hearing, seeing and repetitive motions., • Must be able to stand for extended periods of time while maintaining focus., • Able to be in varying temperature and humidity environmental conditions, • Competitive Pay, • Employee Discounts at Connected retail stores, • Employee Assistance Program, PTO, • Career Growth and Internal Advancement Opportunities, • Chance to work in an exciting new start-up industry with awesome people! Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent to this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instruction or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an "at-will" relationship. The company is an Equal Opportunity Employer, a drug free workplace, and complies with ADA regulations as applicable.

Job Description AJF Inspections has been a trusted name in Arizona since 1996, providing professional home, commercial, and sewer line inspections with a commitment to quality and education. We’re proud to offer a training opportunity that truly sets us apart in the industry. We’re proud to be the only home inspection company in the Greater Phoenix area that invests in your success by paying you during training. About the Role We’re looking for motivated individuals interested in launching a career in home inspection. As a Home Inspector Apprentice, you’ll train alongside experienced inspectors, learning every part of the process, from how we conduct inspections to how we deliver clear, confident reports to clients. During training, you’ll complete 30 parallel inspections and earn $20 per hour while you work toward obtaining your Arizona Board of Technical Registration (AZ BTR) Home Inspector license. Once you’re licensed, you’ll advance to a Home Inspector Trainee or Level 1 Inspector role based on your readiness, with opportunities for continued growth and increased pay as you gain experience and certification levels. What You’ll Do • Train alongside licensed inspectors during parallel inspections, • Learn to perform thorough home inspections using AJF’s reporting software and standards, • Communicate findings clearly and professionally to clients and agents, • Develop technical skills to evaluate structural, mechanical, and environmental systems, • Work collaboratively in the field, • Eagerness to learn and a strong work ethic, • Excellent attention to detail and communication skills, • Ability to navigate attics, roofs, and crawl spaces safely, • Comfort with technology and report writing, • AZ BTR Home Inspector license, • Termite Applicator license (Arizona Department of Agriculture), • $20/hour during your apprenticeship (for 30 parallel inspections), • Pay increases as you advance through levels and licensure, • Medical, dental, and vision insurance (eligible the first of the month after 30 days), • 401(k) participation, • Company-provided training and development At AJF, you’re not just learning a trade, you’re building a career. We invest in your growth from day one and provide a clear path from trainee to full-time, licensed inspector. Our team values integrity, professionalism, and the satisfaction of helping homeowners make informed decisions.

Job DescriptionEnvironmental Collaboration and Conflict Resolution Rising and Emerging Practitioners ProgramEarly Career Paid Opportunities Position Details • Type of Work: Hourly, Part-Time, and Full-Time opportunities, • Duration: Ongoing recruitment for projects, • Location: Remote with some travel depending on project topic and geography, • Type of Work: Hourly, Part-Time, and Full-Time opportunities, • Duration: Ongoing recruitment for projects REP3 seeks to expand access to the ECCR field by providing rising and emerging practitioners from underrepresented communities with training, mentorship, and paid opportunities to work on conflict management and public participation projects related the Department of the Interior and the programs and services of its wide range of Bureaus and Offices. Current opportunities exist for hourly, part-time, or potentially full-time work on projects located in Northern California (water resources issues), New York (environmental planning), and the Gulf of Mexico (environmental justice), and virtually with a Tribal Government (tribal and indigenous engagement). Other opportunities will become available throughout the year. Apply now for current positions, and to be on the list for upcoming positions. Why Apply for the REP3 Program? • Build your collaboration, consensus-building, and community engagement skills by practicing what it takes to be an ECCR professional., • Work with an experienced mentor selected from leaders in the ECCR field., • Build your professional network., • Learn to lead ECCR projects independently., • Assist with planning, designing, and implementing public participation meetings., • Attend program and project check-in meetings., • Complete notetaking, logistics, and planning tasks., • Coordinate environmental justice-related community engagement., • Plan and conduct engagement in an impartial manner., • Participate in skills-based training and check-in meetings with assigned mentor(s)., • Provide feedback on the mentorship program., • Respect for confidentiality while providing neutral ECCR services. Attributes, Skills and Experience Sought • Have experience related to underrepresented and/or non-dominant communities., • Passionate about working collaboratively with diverse communities, organizations, Tribal governments, State, and Federal agencies on complex topics., • Curious about or seeking a career providing neutral ECCR expertise., • Familiarity/proficiency with online communications and meeting platforms, including Microsoft 365 (Outlook, Excel, Word, SharePoint), online whiteboarding tools, Zoom Meetings, etc., • Have six months to three years of experience in one or more of the skillsets/experiences listed below. The candidate may have acquired their experience through informal practice or exposure to experiences that support their capacity to perform the professional duties of this role or through formal work experience, education, or structured training., • Community Resilience Practices: Community organizing, restorative justice, environmental justice, trauma-informed practices, and healing-centered engagement., • Collaborative Leadership: Team building, coaching, diversity, impartiality, and inclusion., • Group Decision-Making Processes: Consensus building, conflict resolution, cross-cultural humility and competency, negotiation skills, facilitation skills, and alternative dispute resolution., • Indigenous Knowledge: Tribal Science, Cultural Resources, and sustainable community resource management., • Public Participation: Public outreach and engagement, equitable and inclusive outreach and engagement, written and verbal communication skills., • Non-Governmental Organization, Public Sector, Rural, Military Service or Tribal Experience: Applicable experience and actively seeking an opportunity to gain experience and mentorship in multi-party collaboration, consensus building, or alternative dispute resolution., • Experience Mediating or Facilitating Public Policy-Related Conflict Management: Applicable experience in collaborative processes and are seeking opportunities to gain experience and mentorship. We are an equal opportunity and affirmative action employer. EEO/AA/M/F/V/D Compensation Kearns & West offers a competitive stipend of up to $30,000 for part-time roles or a stipend of up to $60,000 for full-time roles. Application Process Please apply for the Rising and Emerging Practitioners Program by applying and submitting your resume here What to expect after you apply: • The REP3 team will review candidate resumes on an ongoing basis. If you meet the criteria for the program, you will be entered into a pool of practitioners for consideration on upcoming projects. Key selection criteria includes:, • Commitment to a career related to consensus building and alternative dispute resolution in environmental, natural, and cultural resources., • Leadership, public service, integrity, and consensus building., • Knowledge and skills applicable to a federal agency., • An understanding of the role of an impartial ECCR professional., • When a position becomes available, we will reach out to appropriate candidates based on experience, geography, and subject matter interest to engage candidates in interviews., • Resumes submitted that match the qualifications will be retained and referenced for future opportunities.

Job Description Join American Premier Hospice as a Full-Time Medical Social Worker in the vibrant city of Phoenix, AZ, where you'll be at the forefront of compassionate care for seniors. This onsite position offers you the unique opportunity to work closely with patients and their families, making a meaningful impact in their lives during critical times. You'll collaborate with a dedicated interdisciplinary team, utilizing your expertise to provide comprehensive emotional and social support. Engage in direct patient interactions and witness the difference you can make in their journey, all within a supportive environment that prioritizes personal and professional growth. The dynamic nature of this role means no two days are the same, allowing you to tackle diverse challenges and expand your skill set in the nursing and senior care industry. If you are passionate about enhancing the quality of life for others, this role is your chance to thrive while making a profound difference. What does a Medical Social worker do? As a Full-Time Medical Social Worker at American Premier Hospice, your daily expectations will include conducting comprehensive assessments of patients' social, emotional, and environmental needs. You will develop and implement individualized care plans, collaborating closely with healthcare professionals and family members to ensure holistic support. You will facilitate access to community resources, helping patients navigate healthcare systems and addressing any barriers to care. Providing emotional support through counseling sessions will be a crucial part of your role, enabling patients and families to cope with illness and transitions. Regular documentation of care activities and progress notes will be required to maintain accurate records for compliance and care coordination. Additionally, you'll participate in team meetings and case discussions, bringing your insights to enhance patient care strategies. Lastly, you will stay updated on best practices and policies related to hospice care, ensuring the highest standards of service. Are you a good fit for this Medical Social worker job? • To excel as a Full-Time Medical Social Worker at American Premier Hospice, candidates must possess a blend of education, experience, and essential skills., • A Bachelor's or Master's degree in Social Work is required, with a preference for those holding a Licensed Clinical Social Worker (LCSW) designation. A minimum of 2 years of hospice or palliative care experience is necessary, emphasizing expertise in psychosocial assessments, grief counseling, and family dynamics. Successful applicants will demonstrate strong emotional support and counseling skills, enabling them to provide effective grief counseling and crisis intervention., • Knowledge of end-of-life care principles and a compassionate approach to advance care planning are essential., • Exceptional communication skills are critical for facilitating difficult discussions regarding end-of-life options. Proficiency in advocacy and resource navigation empowers you to connect families with necessary community services. Additionally, experience in interdisciplinary team collaboration, innovative therapy techniques (like CBT and EMDR), and tech-savviness with electronic medical records will further contribute to your success in this role.

Job DescriptionDescription: Overall Purpose: Why the Job Exists & What You Will Do: The Quality Manager provides leadership and guidance for the department, works to improve core processes, and manage projects. They will accept ownership of ensuring the staff is developed in all quality assurance functions. This person also works to develop a clear understanding of the business and technical aspects of the quality assurance function in order to support the entire organization. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role • Exhibit strong communication and problem-solving skills while leading the Quality department toward company goals and objectives., • Identify areas of continuous improvement within the quality department and in the Quality Management System., • Maintain existing quality management system and develop quality and inspection planning, monitor suppliers and manufacturing processes, and develop inspection and testing systems and methods for data collection, analysis and reporting., • Direct generation of First Article Inspection (FAI) Reports, manufacturing and process certs, and Root Cause and Corrective Actions. Interact with customers as needed., • Manage, supervise and oversee the training, qualification and workload of Inspection and Quality Assurance personnel., • Provide leadership to achieve operational excellence through the processes of inspection planning, in process and final inspection surveillance, analysis of data, corrective action and continual improvement., • Train team members in QMS system and maintain training records., • Manage internal and external audits for customers and third-party audits to attain required certifications. Work with all departments to ensure processes are followed to meet audit standards., • Maintain Calibration of Measuring and test equipment in all areas and maintaining records., • Be involved in new product development and review all new jobs for proper documentation and that the customer’s needs are being addressed, as well as identifying gaging needs for new as well as existing work., • Work with customers on deviation approvals for dimensional and cosmetic issues, discuss possible engineering changes to improve part manufacturability, and address any concerns on shipping preservation issues or part quality., • Assure and assist in the timely completion of part quality documentation requirements, including but not limited to: ballooned drawings, inspection check sheets, SPC charts, process flow diagrams, process failure mode and effects analysis’, process control plans, dimensional layout requirements, part submission warrants, capability study, and measurement system analysis., • Maintains quality related documents and work instructions for all company processes., • Education: High school or equivalent, • Experience:, • Minimum of two years in a leadership role required, • Minimum of two years in an aerospace industry required, • Functional Skills:, • Knowledge of CMM programming, use and supporting software, • Knowledge of APQP requirements, • Knowledge of AS9100, ISO13485, and ISO 9001:2015 requirements preferred, • Ability to work closely with all business processes and functions, • Strong independent thinking, strong organizational and planning abilities and excellent analytical and problem-solving skills are essential, • Ability to train, teach and mentor subordinates to develop a strong team, • Ability to define, drive and implement change, • Certification(s): N/A, • Technology Aptitude/Skills: Technical Capacity, Organizational skills, problem solving/Analytical, Time Management and attention to detail., • Language Skills: Excellent verbal and written communication, strong ability to create/write work instructions and train others., • Leadership/Behaviors: Solid collaboration skills, ability to listen to ideas, others, and implement the best enhancements, ability to work with others, be open minded to ideas and try new things. Ability to be positive, conceptualize, and initiate projects effectively. Versatility/flexibility is also key to perform various portions of multiple projects., • Safety Focused, • Tenacity, • Hard Work, • Selflessness • Teamwork, • Peaceful Coexistence, • Patience, • This role routinely uses standard office equipment such as computers, phones, electronic devices, photocopiers, filing systems/cabinets and fax machines., • Ability to operate a motor vehicle, as required for travel in the role, • Ability to stand for up 6-8 hours in one session, • Ability to sit at desk for 2+ hours per day, • Ability to operate keyboard and view computer screen as needed throughout the day, • Ability to write ideas/information in a logical flow as needed throughout the day, • Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day, • Ability to communicate with others via phone, in-person, and computer on-going, • Ability to listen to customers, employees and peers, problem-solve, and respond accordingly, • Ability to read, write and speak English fluently, • Ability to sit, stand, walk, bend, stoop, kneel, crouch, reach, squat, twist, push, pull, and carry items frequently, • The employee is regularly exposed to an office and manufacturing environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments, such as safety glasses., • This position may face inclement weather conditions when traveling., • Travel: Limited, less than 5%

Job DescriptionDescription: Integrated Water Services (IWS) is revolutionizing water! For over 20 years, we have been at the forefront of transforming water challenges into sustainable solutions. Our team of passionate innovators designs and builds cutting-edge water and wastewater treatment systems that protect communities and the environment. From bustling cities to remote regions, we are making a real, positive impact on the world. We are not just engineers and builders; we are problem solvers, creators, and environmental stewards. Join us in building a better future, one water drop at a time. We’re seeking a Senior Water / Wastewater Engineer who has a strong technical understanding of multiple water and wastewater treatment processes and can lead overall process design for facilities. Responsibilities • Translate customer requirements into functional system designs., • Review pre-construction design and documentation., • Support the sales team by assisting with technical design, estimating hours, and highlighting logistical challenges., • Generate functional system descriptions and diagrams., • Provide ongoing engineering support., • Perform system calculations from preliminary to final design., • Provide markups for plans and lead cost estimates., • Coordinate with project staff, other disciplines, subconsultants, clients, and reviewers to ensure accuracy and quality of work., • Manage and maintain project documentation, including meeting project schedules, budgets, and scope., • Assist in proposal development, scopes of work, and fee schedule preparation., • Mentor junior staff with technical and professional development., • Review and approve final design of projects.Requirements:, • Bachelor's degree in engineering (civil, mechanical, environmental or other related field). Master’s degree preferred., • 8+ years of experience in water and wastewater treatment industry, • 5+ years in water quality analysis, treatment evaluations, process design, and regulatory compliance assessments., • Licensed Professional Engineer preferred but not required., • Strong knowledge and understanding of water and wastewater treatment technologies, • Experience with general construction, utilities, and/or water and wastewater treatment plants preferred, • Ability to read and understand civil, mechanical, structural, and electrical drawings., • Ability to create piping & instrumentation diagrams (P&IDs)., • Proficient with MS Office products and other standard software packages. Join Our Team: Are you ready to make a splash? IWS is seeking talented individuals to join our high-energy team. We offer competitive compensation and endless opportunities for growth. Be part of something bigger than yourself. Benefits: • Competitive salary and incentive compensation plans, • Comprehensive benefits package (medical, dental, vision, STD, LTD), • Paid time off (PTO) to recharge and explore Base Salary: $125,000 - $165,000 *The provided base salary range is used nationally. The rate offered is compliant with federal/local regulations and may vary by experience, certification/education, market conditions, location, etc. #LI-Remote IWS is an equal opportunity employer. We do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, or sexual orientation.

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands—including Curaleaf, Select, and Grassroots—offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Title: Logistics Coordinator – Pick & Sort Team Starting Pay Rate: $17.25/hr Location: Phoenix, AZ Job Type: Full Time | Non-Exempt Shift: Monday–Friday | 7:00am – 3:30pm Who You Are: You're a hands-on team player who thrives in a fast-moving, production-focused environment. You're organized, reliable, and quick to adapt when priorities shift. You take pride in accuracy — whether it's tracking inventory, processing orders, or supporting the flow of product from start to finish. You stay calm under pressure, communicate clearly, and know how to keep things moving to meet daily goals and deadlines. What You'll Do: As a Logistics Coordinator on the Pick & Sort Team at Curaleaf, you'll be the link between our product and inventory teams — ensuring that every order, transfer, and shipment runs smoothly from start to finish. You'll play a key role in maintaining accurate records, supporting wholesale operations, and keeping our production flow efficient and compliant. A typical day will look like: • Supporting inventory management through material counts, record updates, and accurate reporting, • Partnering with the Inventory Specialist to reconcile data, prepare reports, and track inventory levels across departments, • Managing product movement — including transfers, manifests, stocking, and fulfillment — with precision and attention to detail, • Picking, packaging, counting, and scanning wholesale orders while ensuring labeling and documentation meet compliance standards, • Utilizing BioTrack to maintain real-time, error-free tracking of all product movement, • Maintaining a professional, solutions-focused attitude during busy periods and shifting priorities, • Assisting with cultivation or other operational tasks as needed to support the broader team, • You have experience in order fulfillment, logistics, or inventory management, • You're organized, detail-oriented, and take pride in accuracy across everything you do, • You communicate clearly — whether it's updating a report, coordinating with teammates, or troubleshooting an issue, • You're tech-savvy, comfortable using Microsoft Office, and confident with numbers and basic calculations, • You bring a strong work ethic, integrity, and the ability to adapt quickly in a fast-paced environment, • You can think critically, solve problems independently, and stay calm under pressure, • Ability to stand, sit, and walk for extended periods of time (8-10 hours per shift), • Ability to lift and carry up to 50 pounds regularly and occasional lifting of heavier items with assistance, • Frequent and repetitive use of hands and wrists for extended periods of time, • Repetitive bending, squatting, and reaching, • Ability to climb ladders or step stools to access plants or equipment, • Exposure to environments with high humidity, varying temperatures, and strong odors (such as cannabis), • Exposure to soil, water, fertilizer, dust, pollen and plant pathogens, • Exposure to cleaning solvents, such as high volumes of isopropyl alcohol, • Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms, • Career Growth Opportunities, • Competitive Pay and Benefits, • Generous PTO and Parental Leave, • 401(K) Retirement Plan, • Life/ Disability Insurance, • Community Involvement Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, JAMS, Find and Zero Proof provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is the largest vertically integrated cannabis company in Europe with a unique supply and distribution network throughout the European market, bringing together pioneering science and research with cutting-edge cultivation, extraction, and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: • Lead and Inspire., • Commit to Win., • ONE Curaleaf. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Job Description Matrix has been named a Zweig Group 2025 Best Firm! Matrix Design Group, Inc. is an award winning, employee-owned engineering, planning, and consulting firm. As an employee-owned company we are committed to fostering, cultivating, and preserving a culture of diversity, respect, and excellence and provide innovative and sustainable solutions for our clients. We have a friendly, collegial, cooperative atmosphere and offer a full range of benefits including an Employee Stock Ownership Plan (ESOP); medical, dental, vision, disability, and life insurance; holiday, vacation, and sick leave; training and education; and a 401(k) plan. Matrix employees are encouraged to participate in employee wellness programs, social committees, and community outreach programs. This position is for transitioning service members participating in the DOD SkillBridge Program. Opportunities are available in the following centers of excellence: Civil Services Construction Management Environmental Services GIS Government Consulting Landscape Architecture Planning Services Structural/Transportation Water Resources/Ecological Services Location: Colorado Springs, CO; Denver, CO; Phoenix, AZ or San Antonio, TX preferred. Open to considering other remote locations. Salary: N/A SkillBridge Internship Summary: Responsible for providing consulting support to the Government Consulting Services Center of Excellence (CoE). Consulting support is typically related directly or indirectly to the Department of Defense or state/local government(s) and may include developing study methodologies, data collection and analyses, researching and writing unique reports, and other tasks as assigned. This role is ideal for a professional passionate about public service, process improvement, and project management. Essential Functions: • Research areas or issues as assigned and write formal and informal reports of varying lengths focused on summarizing information or persuading readers to support objectives., • Support continuous process improvement and business process reengineering projects through process mapping; data collection, analysis, & visualization; and development of digital solutions., • Support project execution to include preparing reports, developing technical documents and presentations, and contributing to other’s project deliverables., • Plan, organize, and lead facilitation of virtual and in-person engagements with project stakeholders focused on visioning, brainstorming, and solving various challenges., • Meeting with clients and their representatives as an individual or part of a team to present results, resolve issues, answer questions, and maintain good relations., • Project management or project management assistance including budgeting, scheduling, organizing teams, prioritizing multiple projects and deadlines, quality assurance and invoicing., • Familiarity with the organization and structure of the U.S. Department of Defense, with a more detailed working knowledge of one or more of the military services., • Gather input from stakeholders involved in all aspects of a project to ensure their perspective and specialized knowledge is incorporated into recommendations and proposed solutions., • Collect and organize information from a variety of sources, such as computer databases, scanned documents, surveys, and customer feedback., • Ability to use statistical analysis, simulations, predictive modeling, or other quantitative methods to analyze information and develop practical solutions to business problems., • Write memos, reports, and develop presentations explaining findings and recommendations for managers, executives, and other project stakeholders, • Outstanding communication (written and oral) and presentation skills., • Well versed in use of the Microsoft Office suite of products, to include Teams, Word, Excel, PowerPoint, and others., • Ability and willingness to travel to project sites and other facility offices., • Working knowledge of data visualization and automation tools (e.g. Power BI, Tableau, and others) is preferred. Education and Experience: • Undergraduate or graduate degree in engineering, architecture, operations research, data science or related field of study., • Minimum of four years of work-related experience, preferably in the areas of engineering, public works, installation management, construction management, logistics, or base operating support., • Valid driver's license, in conjunction with successfully passing the Company’s MVR screening. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Physical Demands: While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 10 pounds. The noise level in the work environment is usually moderate. Matrix Design Group, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, gender, color, religion, sex, national origin, or protected veteran status, and will not be discriminated against based on disability. Any applicant with a qualifying physical or mental disability who believes they require reasonable accommodation for any part of the application process should contact us at 719-575-0100 for assistance. How to Apply: Please apply online at

Job Description Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today! UCT is looking for a talented Planner II to join us in Chandler, AZ! The Planner II manages production planning and control for assigned lines, ensuring timely material availability and schedule adherence. This role coordinates with vendors, purchasing, engineering, and operations to resolve shortages, clear inspections, and maintain quality standards. By proactively addressing production issues and maintaining strong cross-functional relationships, the planner supports efficient, on-time delivery in a fast-paced, engineer-to-order environment. Essential Duties and Responsibilities: • Responsible for all production planning and control issues for assigned production line(s)., • Coordinates production plans to ensure materials are provided according to schedules., • Build and maintain good working relationship with Outside Vendor Suppliers (OVS)., • Handles all Purchase order creation, releases, completion and closing., • Trouble-shoot all production control problems and drive them to correct closure., • Monitors all process shortages and ensures resolution is attained., • Builds positive relationships with manufacturing and materials in a quick-turn, engineer-to-order environment., • Works closely with engineering, quality, purchasing, and other operations staff to ensure functional specs are met, parts are available as needed, and quality is maintained., • May interface with customers to schedule deliveries or discuss issues. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Knowledge, Skills and Abilities: • Excellent written and verbal communication skills., • Strong organization skills and the ability to build effective working relationships with internal customers/suppliers., • Strong PC skills to include Microsoft Office software suites., • Meeting management skills., • Strong attention to detail. Criteria: Work Environment: • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Work may require the ability to lift 10-20 pounds infrequently., • Ability to stand for sustained periods of time., • Ability to move arms, hands and fingers., • Ability to lift over 25 lbs. with assistance, • Ability to sit for sustained periods of time. UCT offers an excellent benefits package to all full-time employees, which includes medical, dental, vision, 401(k), and paid time off.