Plant jobs in Los Angeles, California - Page 8Create job alerts

Job Description PRODUCTION LINE WORKER I JOB DESCRIPTION Position Title: Production Line Worker I Classification: Non-exempt, Hourly Department: Production / Quality Supervises: N/A Reports To: Production Supervisor Work Schedule: Varies by plant POSITION SUMMARY: A Production Line Worker I is a general laborer responsible for safely and efficiently performing general labor duties at a glass recycling facility. SUPERVISORY RESPONSIBILITIES: • Not applicable DUTIES AND RESPONSIBILTIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions, to the extent that such an accommodation does not pose an undue hardship on the Company. • Process and sort materials through a production line which may require standing., • Maintain material flow and ensure quality product by completing routine checks on optical sorters and screens., • Clean a specific zone that may include conveyors, sorters, platforms, stairs, screens, and floors., • Wear appropriate site specific personal protective equipment (PPE), as required., • Understand and adhere to all company operating procedures and company safety policies., • Maintain a safe work environment by following our process and procedures (5S)., • Maintain a clean work area by picking up trash and sweeping the floor., • Identify possible quality issues with material being processed and communicate with the supervisor., • Identify potential equipment issues and communicate with the supervisor., • Any other related duties, as assigned by their supervisor. COMPETENCIES: To perform the job successfully, an individual should demonstrate the following. • Adaptability - Demonstrates persistence and overcomes obstacles. Measures self against standard of excellence. Recognizes and acts on opportunities. Sets and achieves challenging goals. Takes calculated risks to accomplish goals., • Communication - Exhibits good listening and comprehension skills. Competently communicates ideas and thoughts both in writing and verbally. Keeps others adequately informed. Selects and uses appropriate communication methods., • Dependability - Commits to doing the best job possible. Follows instruction. Keeps commitments. Meets attendance and punctuality guidelines. Responds to requests for service and assistance. Takes responsibility for own actions., • Quality - Applies feedback to improve performance. Demonstrates accuracy and thoroughness. Displays commitment to excellence. Looks for ways to improve and promote quality. Monitors own work to ensure quality., • Quantity - Achieves established goals. Completes work in timely manner. Meets productivity standards. Strives to increase productivity. Works effectively., • Teamwork - Balances team and individual responsibilities. Contributes to building a positive team spirit. Exhibits objectivity and openness to others' views. Gives and welcomes feedback. Puts success of team above own interests. . REQUIRED SKILLS/ABILITIES: To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) occasionally. REQUIRED PHYSICAL ABILITIES: The physical abilities listed below are bona fide occupational requirements for this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Mobility • Bending – bending/twisting at the waist will be required for extended periods., • Standing – standing for extended periods may be required., • Walking – walking on flat or uneven surfaces, up and down stairs and on grass or gravel will be required., • Sitting – sitting at certain workstations or in powered industrial vehicles may be required., • Climbing - will need to climb stairs and climb ladders. Articulation • Lifting/Carrying – lifting loads up to 50 pounds may be required, assisting in lifting heavy loads with others may be required., • Reaching – the ability to extend arms fully is required., • Grasping – the ability to close both hands to grasp small objects is required., • Repetitive Movements – the ability to reach and grasp for extended period is required. EDUCATION AND EXPERIENCE: • High School diploma or GED preferred. WORK ENVIRONMENT: The work environment described below represents the characteristics an employee will experience while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job requires exposure to the following conditions: • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements occasionally., • Heights – work at heights above 48 inches may require the wearing of additional safety equipment., • Dust/Fumes – when required employees must be able to wear respiratory protective equipment and/or participate in medical exams as part of our respiratory protection program. Respiratory protective equipment use may require that face must be clean shaven., • Extreme Heat/Cold – most operational areas are not heated or cooled., • Rain/Snow – work surfaces may become slippery, appropriate work shoes are required., • Uneven Terrain – employees may be required to walk on surfaces where materials are accumulated, appropriate work shoes are required., • High Noise Levels - employees may be required to wear hearing protection and/or complete hearing examinations as part of our hearing conservation program. EQUIPMENT REQUIREMENTS: The job requires documentation and demonstrated ability to operate the following equipment. • Not applicable

Job Description PRODUCTION WORKER Bentley Mills – City of Industry, CA We are a carpet manufacturing company located in City of Industry, CA. We currently have several open positions at our manufacturing plant and are looking for motivated individuals to join our team. Available Shifts: 1st Shift: • 4:00 AM – 12:30 PM, • 11:00 AM – 7:30 PM, • General labor tasks including:, • Packing carpet tiles, • Loading and unloading racks of yarn, • Entry-level position (no prior experience necessary) Frequent: • Handling and manual dexterity, • Lifting 50lbs., • Use of flat dollies and carts to avoid lifting heavy weights, • Reaching, standing, stooping, and walking, • Balancing, climbing, crawling, crouching, • General warehouse environment, • Exposure to background noise, dirt, oil, and humidity, • Temperature variations depending on the season Equal Employment Opportunity: Bentley Mills provides equal employment opportunities to all employees and applicants. We prohibit discrimination and harassment of any type based on race, color, religion, age, sex, national origin, disability status, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by law.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Quality Assurance Supervisor Reporting To: Manager, Process Work Schedule: Onsite - Torrance, CA Moog Military Aircraft Group has an immediate opening for a Quality Inspection Supervisor to support our Audit and Metrology Department. Reporting to the Site Quality Manager, you will have a 9/80 schedule (every other Friday off) and work on-site at our aerospace plant in Torrance, CA. Moog Aircraft Military provides flight control equipment and systems to the world's leading military platforms. Headquartered in East Aurora, NY. We employ 14,000 employees in 24 countries. At Moog we have a culture of trust and mutual respect; and for you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. This is a position of both technical and managerial leadership. The QC Supervisor must have balance between a tactical and strategic approach to issues and solutions within the disciplines of Metrology and Receiving Inspection will establish and maintain continuous improvement of processes that uphold product and process quality throughout the production value streams and support services. To be considered for this role, here's what you'll need to bring with you: \n • 2 year technical school degree, with 4 years or more of directly related experience with Quality Inspection or\n, • High School, GED or formal training equivalency, with 7 years or more experience with directly related experience with Quality Inspection.\n, • Knowledgeable in metrology and simple and complex inspection practices, tool and gage application, piece part function and product application.\n, • Strong working experience with the Quality requirements of parts, products and processes, including supporting activities.\n, • Must be able to communicate concisely and clearly, both verbally and in writing and be able to substantiate a position on recommended changes, dealing with personnel from several levels in the company.\n, • Understanding of AS9100 is required.\n, • Leadership experience.\n, • Computer skills such as Microsoft Word, Excel, PowerPoint, and Outlook.\n\n It'd be great if you had: \n • Bachelor's degree in business or engineering\n, • Experience in the aerospace or other highly regulated industry\n, • Knowledge of military and government specifications.\n, • Experience with SAP\n\n As a Quality Inspection Supervisor, you will: \n • Plan, lead and manage the Metrology and Receiving Inspection Teams, which are comprised of Metrology and Receiving Inspectors.\n, • Provide a measurement of supplier, operator, management and system compliance to Moog, customer and government requirements in an efficient and economical manner that motivates good quality attitudes in production, supervisory, and support personnel.\n, • The metrology function should coordinate and provide calibration services using both internal resources and outside procured resources.\n, • The Receiving Inspection function plans workloads and assigns jobs as required to maintain high quality standards and production schedules.\n, • Implement company policy and assure compliance of Moog Systems and procedures to customer, government and regulatory requirements.\n, • This position requires frequent contact with personnel both inside and outside the Quality organization, to build and maintain close working relationships with Moog Operations, Engineering, Supply Chain, Program Management, Value Stream Managers, Quality Control, and the Materials Team. Contact with external vendors and customers requires critical interpersonal skills.\n\n How We Care for You: \n • Financial Rewards: competitive compensation package, annual profit sharing, matching 401k, and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts.\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance; our Torrance location has a 9/80 work schedule with every other Friday off.\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages.\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs.\n, • Diverse and Inclusive Workplace: Employee Resource Groups, cultural events, and celebrations\n\n #LI-TB1 Salary Range Transparency: Torrance, CA $90,000.00-$120,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787.

Philadelphia Gear part of the Timken Power Systems group in Santa Fe Springs, CA has a current opening for a Quality Assurance Supervisor. The position supervises and leads a team of qualified inspectors, has responsibility for all aspects of incoming purchased material inspection and validation, document control, calibration and internal/external audit assistance, Non-Destructive Testing (NDT), and other quality processes. Position reports to the Quality Manager and is also responsible for Quality Inspection follow-through. Key Responsibilities: \n • Identify opportunities/gaps in existing quality standards, practices, and tools.\n, • Manage operative direct reports; 3 NDT inspector and 3 dimensional inspectors for technical requirements and scheduling.\n, • Review all quality documents from the manufacturing process per project/ contract.\n, • Oversee receiving, in process and final inspection processes.\n, • Provide final reports as required per contract.\n, • Manages scheduling of work and material flow through areas of responsibility.\n, • Work directly with customers on quality aspects of our projects.\n, • Assist government/ customer onsite inspections when required by project/ contract.\n, • Work with the quality/ engineering team in managing the calibration system. \n, • Monitors supplier performance reports these metrics internally and flow down to suppliers quarterly.\n, • Establishes training and provides mentoring to all employees in all technical aspects of quality inspection.\n, • Ensure the use of safety devices and equipment, supervision plant housekeeping and continually being alert for hazardous conditions and unsafe practices.\n, • Implement appropriate training, procedures and controls to assure the safety practices are developed and followed. Reduce workplace hazards and OSHA and EPA non-compliance in the facility.\n, • Light travel required\n\n Required Skills and Experience \n • High School equivalent with minimum 7+ years direct inspection and quality system experience or bachelor's in engineering, manufacturing, or similar discipline with a minimum of 3+ years inspection & quality experience\n, • Broad technical understanding of industrial manufacturing applications with preference for gear experience\n, • Knowledge of materials, processes, and inspection methods\n, • Proficiency in Microsoft Office products\n, • Familiar with ISO 9001 Quality certification\n, • Proficiency in precision inspection tools and measurement\n, • Familiar with reading and understanding detailed engineered drawings\n, • Familiar with Non-Destructive Testing.\n\n Pay Range: $80K - $99K annual All qualified applicants shall be treated equally according to their individual qualifications, abilities, experiences and other employment standards. There will be no discrimination due to gender or gender identity, race, religion, color, national origin, ancestry, age, disability, sexual orientation, veteran/military status or any other basis protected by applicable law. Timken is a global technology leader in engineered bearings and industrial motion. Our expanding portfolio of next-generation solutions helps customers around the world improve efficiency, solve their toughest challenges, and push the boundaries of performance. We employ 19,000 people globally, operate from 45 countries, and posted $4.6 billion in sales in 2024. We have been recognized as one of America's Most Responsible Companies and one of America's Greatest Workplaces for Diversity by Newsweek, one of the World's Most Ethical Companies® by Ethisphere and one of America's Most Innovative Companies by Fortune. Why Choose Timken? \n • Over a century of knowledge and innovation\n, • A culture of top performance\n, • A global, diverse environment\n, • Products that contribute to a sustainable world\n, • A conviction to improve communities around us\n, • Competitive salary and benefits\n\n Not Ready To Apply? Stay connected by joining our network and we'll keep you informed about upcoming events and opportunities that match your interests. Talent Community

Job Description Gardena, CA Production Associate Job Description About Sakara: Sakara Life is a rapidly growing organic meal delivery company. Our organic meal delivery program is based on the science behind a whole-food, plant-rich diet. Each meal is nutritionally designed to contain the optimal amount of plant-based protein, hydrating fresh produce and nutrient-dense superfoods to help balance, restore and heal the body, so our clients can look and feel their absolute best. We are currently seeking passionate, positive and hardworking team players to join our Production team in Gardena, CA. We are a performance-based culture and reward hard work and exceptional results with competitive compensation and opportunities for growth. Job Functions: • Cooking and food prep tasks including: cleaning, chopping, cooking vegetables and fruit, making sauces, baking, etc., • Portioning soups, sauces, dressings, • Assembling, labeling, and packaging meals, • Must be at least 18 years old, • Must be eligible to work in the U.S., • Must be able to work weekends, holiday and overtime as required, • At least 1 year of related experience preferred, • Comfortable working in a fast-paced warehouse and kitchen environment with strict deadlines, • Must be able to stand and/or sit for extended periods of time, with or without reasonable accommodation, • Exposure to refrigerated or freezer space for extended periods of time, • Excellent "can-do" attitude, strong work ethic, and great team spirit, • Must be able to bend and lift up to 49 pounds, • Ability to work in multiple roles throughout kitchen and warehouse, • Knowledge in food safety policies including Good Manufacturing Practices (GMPs), • Competitive hourly wages, • Health, dental and vision benefits, • Paid sick leave and vacation, • 401(k), • Family meals Powered by JazzHR FP0TUm3m5O

Job Description ICP is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. The Manufacturing Associate role is pivotal to the success of the production of our products. The Manufacturing Associate will safely perform the tasks required to facilitate the efficient production of our products. This encompasses production from the raw material state to the final packaging of products. These tasks may require the operation of various types of machines or controlling various types of processes. You should understand industrial safe work practices, the basic principles of mechanical operation of equipment, follow SOPs, respect chemical operations, basic quality understanding and preform required housekeeping responsibilities. 1st shift, Monday - Friday 6:30am - 3:00pm Key Responsibilities • Follows standard operating procedures, company policies and safety regulations., • Utilize the proper PPE for each task performed and maintain PPE in a safe and usable condition., • Operate equipment and perform tasks as instructed or trained by your supervisor or experienced personnel., • Monitor the quality of product as it moves through the production process and alert supervisor of potential out of compliance issues., • Perform start up and shut down activities as directed from the supervisor., • Actively participate in cross training across the various line positions in the plant., • Maintain accurate counts and document products being produced or used as required for the position., • Keep the production line organized, clean and free of any hazards., • Grease, adjust or clean specific parts of the production line in support of an Autonomous Maintenance Program., • Accomplish safety targets set by supervisors and management., • Train Laborers and new Manufacturing Associates., • Perform General Laborer duties as required to meet production needs., • Attend safety meetings, conduct safety audits., • Ability to comprehend and abide by relevant policies/procedures pertinent to safety, quality, security, and operations., • Strong Attention to detail., • Forklift experience a plus., • Ability to Multi-task and watch multiple processes at the same time., • Experience reading and working with SOPs a plus., • Have experience working with chemicals and/or light chemical manufacturing is preferred., • Have basic math skills and be able to apply them in a work environment., • Ability to be flexible and adaptable, and change priorities and direction as needed., • Must have a positive attitude towards work and can work well as a member of a team, • After receiving training, employee must be able to show understanding and competency on safety rules and regulations by written or verbal examination., • Ability to understand and follow posted signage throughout the facility., • Clear understanding of lock-out, tag-out procedures., • Must be familiar with the standard operating procedure and operator manual for the safe operation of the equipment., • Required to have 20/20 vision or corrected 20/20., • Strong communication skills., • Employee must have full range of motion to stand, walk, sit, reach, climb, stoop or kneel., • Employee must be able to complete repetitive strenuous work under varying climate conditions., • Employee must be able to safely lift up to 70 Lbs., • Employee must be able to stand for extended periods. Powered by JazzHR 81HeumVz3E

Company Description Vestcom is the industry leader in technology-driven shelf-edge solutions for Retailers and CPGs. Our data-integrated media solutions drive sales and loyalty, engaging shoppers where it matters most - the point of decision. Our patented innovation has been trusted by top retailers for more than 30 years to drive productivity and profitable growth. For our growing team of over 1000 employees, Vestcom offers the stability of an established company with the entrepreneurial spirit and fast-paced environment of a start-up. Vestcom's core values are at the heart of our organization, representing our fundamental beliefs and serving as our guiding light in for how we conduct business and interact with each other. \n • OUR TEAMS - Our colleagues and our client define our team.\n, • OUR INTEGRITY - Our colleagues and clients rely upon us to deliver.\n, • OUR INGENUITY - Our colleagues and clients look to us for unique solutions.\n Job Description SUMMARY To complete all tasks involving the manufacture and maintenance support of all machines in the production facilities. Set up and operate a variety of machine production equipment. Fit and assemble parts to fabricate or repair machine tools and maintain industrial machines. Ensure that equipment and processes are maintained in a preventive fashion to ensure optimum reliability and up time. Essential Duties and Responsibilities include but are not limited to the following: \n • Assemble new and rebuild existing equipment.\n, • Setup and install equipment, upgrades and retrofits off-site.\n, • Provide training for operation of new equipment.\n, • Troubleshoot and repair mechanical equipment on and off-site.\n, • Operate powered and manual hand tools.\n, • Read electrical prints\n, • Replace faulty parts\n, • Pull and terminate wires\n, • Troubleshoot problems\n\n\n, • Pneumatic installation and repair.\n, • Operate 9514XLS, Robot and other converting equipment.\n, • Operate fork lift.\n, • Maintain and manage parts inventory\n, • Order and receive new parts\n, • Train operators on new and refabricated equipment\n, • Provide support to department for plant improvement or facility projects, as needed.\n, • Must be available to work overtime days/hours as needed for emergency repairs.\n, • Must be able to work proficiently with minimal supervision.\n, • May be required to travel to remote facilities up to 70% of the time.\n, • Other duties as assigned by management.\n, • Regular attendance is an essential function of this position.\n, • Compliance with applicable Company policies concerning maintaining a drug free workplace is required.\n, • Compliance with all Company policies including all safety policies and procedures is required.\n\n Qualifications Education and/or Experience \n • High school diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience.\n, • To perform this job successfully, an individual should have basic computer knowledge to include Google, MS Word and Excel.\n\n Additional Information Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job in a manufacturing environment. The Physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job in a manufacturing environment. \n • Job requires standing over 75% of the time on a daily basis.\n, • Ability to lift 50 pounds with full range of motion.\n All your information will be kept confidential according to EEO guidelines. #HP

Responsibilities About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Howmet Fastening Systems (HFS) is seeking a Maintenance Tech Industrial Electrician in our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California. We hold the number one global position in aerospace fastening systems, and we're the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. Primary Purpose The primary function of this position is to maintain, repair, adjust, and modify the facilities tools and equipment, as well as the building and its grounds, according to a set schedule and in emergency and non-emergency situations. Major Activities • Perform mechanic skills including but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Connects power supply wires to machines and equipment and connects cables and wires between machines and equipment., • Diagnoses malfunctioning apparatus such as transformers, motors and lighting fixtures and replaces damaged or broken wires and cables., • Tests malfunctioning machinery and discusses malfunction with other appropriate personnel to diagnose malfunction., • Replaces faulty electrical components such as relays, switches, motors, and sensors., • Replaces electric motor bearings and rewires motors., • Plans layout of wiring and installs wiring, conduit, and electrical devices in buildings., • Strictly adhere to safety regulations and plant policies., • Perform highly diversified duties to install and maintain production machines and the plant facility's tools and equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service., • Perform simple machinist duties and responsibilities., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, repair or replace parts, test and make adjustments., • Use a variety of hand and power tools, electric meters and material handling equipment in performing duties., • Detect faulty operations, defective material and report those and any unusual situations to proper supervision., • Perform all other duties as assigned or needed., • Mechanical aptitude and willingness to work on oily and noisy machinery., • Knowledge of or experience in working with Screw Machines, Drillers, Tappers, and other manufacturing equipment, as well as troubleshooting the above-mentioned machines., • Excellent communication skills., • Strong interpersonal relationship skills., • Physically able to stand, bend, reach, stretch, and lift 15-30 pounds repetitively., • Flexible, whatever it takes attitude., • Detail oriented and has the ability to follow both oral and written directions, ability to work unsupervised.\n\n Qualifications Basic Qualifications • High School Diploma or GED equivalent (Preferred), • Minimum 5 years of experience as an Industrial Electrician, • Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation. Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $30-$38. About Us Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $7.4 Billion in revenue in 2024, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2024 Environmental Social and Governance report at . Follow: LinkedIn, Twitter, Instagram, Facebook, and YouTube. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity employer. We are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email [email protected] About the Team Howmet fastening systems are the premier aerospace and industrial fasteners, latches, bearings, fluid fittings and installation tools. Our products are used nose to tail on commercial and military defense aircraft, as well as on jet engines, automobiles, commercial transportation vehicles, wind turbines, solar power systems, and construction and industrial equipment.

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Senior Metrology Technician Reporting To: Manager, Process Work Schedule: Onsite - Torrance, CA Moog Military Aircraft Group has an immediate opening for a Senior Metrology Technician to support our precision manufacturing and compliance with aerospace standards. In this role, you will perform calibration on electromechanical and hydraulic test stands, as well as preventative maintenance, tests, and calibrations on heat treat furnaces-including vacuum furnaces. Reporting to our site Quality Manager, this on-site position is at our aerospace plant in Torrance, CA (Los Angeles area). Moog Military Aircraft provides flight control equipment and systems to the world's leading military platforms. Headquartered in East Aurora, NY, Moog employs 14,000 employees in 24 countries. At Moog we have a culture of trust and mutual respect; and for you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. As a Senior Metrology Technician, you will: \n • Maintaining up-to-date records and a recall system for calibration and maintenance actions on lab-related equipment.\n, • Interfacing with customer and government representatives during audits of Moog's calibration systems, and collaborating daily with engineers, supervisors, and managers on calibration issues.\n, • Instructing, guiding, and developing methods for proper usage and adherence to calibration procedures.\n, • Calibrating mechanical, electrical, and hydraulic measurement equipment to manufacturer and industry calibration specifications.\n, • Performing SAT (System Accuracy Tests) and TUS (Temperature Uniformity Surveys) on heat treat furnaces, ensuring compliance with AMS2750 and other aerospace standards.\n, • Applying strong knowledge of vacuum heat treat operations, including system functionality, leak detection, and thermal profiling.\n, • Working from drawings, purchase orders, customer specifications, MIL specs, manufacturer's instructions, and Moog calibration procedures.\n, • Performing electronic/electrical calibrations requiring complex connection configurations, interpreting schematics and documentation to restore equipment to specified parameters.\n, • Operating test equipment and systems as part of the calibration process, with familiarity in hydraulic fluids, viscosity, density, and seal solvent compatibility to prevent cross-contamination.\n, • Improvising instrument and measuring configurations for special testing and making routine surface plate setups in inspection or calibration of gauging and fixtures.\n, • Working independently or collaboratively to calibrate equipment, often requiring extended periods of visual and mental concentration and physical dexterity. Occasionally working in awkward positions and challenging conditions.\n, • Planning work proactively to minimize production downtime, using sound judgment to resolve unusual problems without supervisory assistance\n\n To be considered for the Senior Metrology Technician role, here's what you'll need to bring with you: \n • Two year technical degree, a technical trade school diploma, military certification or American Society for Quality Certificate as a Certified Calibration Technician\n, • The equivalent of 5 or more years of direct experience with calibration would be considered in lieu of formal education or certification\n, • 5 years or more working experience with calibration methods and equipment usage necessary to meet industry, customer and specifications\n\n How We Care for You: \n • Financial Rewards: competitive compensation package, annual profit sharing, matching 401k, and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Diverse and Inclusive Workplace: Employee Resource Groups, cultural events, and celebrations\n\n #LI-TB1 Salary Range Transparency: Torrance, CA $30.00-$40.00 Hourly Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787.

Job Description RN Health Care Facility Surveyor - Remote (#1142) • Company-issued and company-paid Amex card for travel, • All travel expenses paid directly by the company, • Airline and hotel points accumulate for employee's personal use Responsibilities The position is 100% remote with up to 75% travel. The Surveyor will serve as a team member or team leader on various types of surveys (i.e. re-certification, comparative, complaint investigation, and revisits) for long-term care and non-long-term care surveys, which can include; ambulatory surgical centers (ASC), Intermediate Care Facilities for Individuals with Intellectual Disabilities (ICFs/IID), end-stage renal disease (ESRD), Psychiatric Residential Treatment Facility (PRTF), hospital, critical access hospital, and hospice facilities. Surveyors travel to healthcare facilities nationally conducting surveys to assess compliance with requirements and regulations guiding the quality of care for residents/customers of the facilities. The responsibility of the Surveyor is to apply approved survey protocols for conducting on-site surveys. Specific activities include the following: • Conduct on-site surveys of Medicare-Medicaid certified health care facilities to determine compliance with Federal regulations., • Surveys require preparations such as off-site preparation, tour of the facility, observation of care, record review, interviews of staff and families, etc. Determine if care, treatment, and services are consistent with Federal requirements., • Evaluate many aspects of the healthcare facility system from the quality of care to the consumers’ rights and physical plant., • Communicate the non-compliance issues with key personnel throughout the site review and during the exit conference to assure an understanding of the deficiencies cited., • Determine if a plan of correction is acceptable., • Conduct follow-up visits and monitoring surveys to ascertain if facilities’ plans of correction to resolve the deficient practice have been implemented., • Training: Assist with facility and bureau training. Participate in work groups as needed Requirements • Must have an Associate or Bachelor’s degree in nursing, • Must have successfully completed CMS’s Long-Term Care Basic Training and passed the Surveyor Minimum Qualifications Test (SMQT)., • Must have At least two (2) years of recent experience working as a surveyor accrediting or certifying facilities that serve the residents of long-term care facilities., • Must maintain current licensure to practice as a Registered Nurse (RN)., • Demonstrated a history of independent decision-making skills to direct and effectively manage the survey process., • Ability to set priorities independently and collectively in performing survey tasks., • Ability to openly discuss conflicts/controversy, and to seek assistance when appropriate to make decisions and resolve conflicts., • The salary for this position is $75,000 - 90,000 / yr, • This is a Full-time position (Monday - Friday), • Flexible paid vacation days, • Paid holidays, • Company-issued and company-paid Amex card for travel, • All travel expenses paid directly by the company, • Airline and hotel points accumulate for employee's personal use, • Employee discounts, • Employee retirement plan (401k) with a generous match and immediate vesting, • Company-paid tax-free Health Savings Account (HSA), • Health insurance, • Dental insurance, • Vision insurance, • Company-paid life insurance, • Company-paid disability insurance, • Extensive training opportunity, • Predictable work schedule

Job Description WHY YOU'LL LOVE WHAT YOU DO AT PLANTA: * Medical, Dental, Vision & Life Insurance offered for PLANTA employees. * Work/life balance is a priority — annual PTO starts 90 days after date of employment. * No limit on referral bonuses for sending Leadership and Team Members our way, paid after 180 days of successful employment. * 50% off delicious plant-powered food at all full-service PLANTA concepts: PLANTA, PLANTA Queen, and PLANTA Cocina. * Exciting career growth & development opportunities as part of an ever-expanding company: new restaurants and new positions are always on the horizon. PLANTA is building a team of inclusive, strategic, and dynamic individuals who lead with a focus on equity, productivity, and workplace satisfaction. Our mission is to FUEL THE FUTURE and we do this across every corner of the hospitality industry, from creative and marketing to culinary, beverage, and beyond. Together, we craft exceptional guest experiences that leave a lasting impression. At PLANTA, our passion for hospitality runs deep. It goes beyond delivering outstanding experiences for our guests; it's about nurturing and developing our team to become the next generation of industry leaders. We are committed to sourcing the finest ingredients and embracing our social responsibility to create a more sustainable organization each day. What you'll find at PLANTA is a culture fueled by our core values: Determined—we stand for change, and together, we plan to win. Humble—we make mistakes, but we own them and learn from them. Intentional—we genuinely care about the people and the world around us. Nourishing—we aim to leave our guests, communities, and team members in a better place. Evolving—we embrace change and champion flexibility as we grow together. FOH SHIFT LEADER A multifaceted role, the FOH Shift Leader works in conjunction with the Restaurant Leader to oversee the daily operations of the restaurant. Focusing on staff training, generation of top line revenue and management of labour and cost of goods, the Restaurant Supervisor will be involved in all aspects of the restaurant. WHAT'S ON YOUR PLATE: • Champion the brand’s vision and values and ensures alignment amongst the concept team, • Support a culture of positivity and high standards where all staff CHASE perfection in everything they do, • Lead by example, create an environment that is warm, welcoming and filled with positivity for guests and employees, • Executes standard operating procedures, coordinates restaurant operations during each shift, determines and implements operating improvements, • Supporting Leadership Team in developing and implementing creative and effective staff training initiatives, • Executing efficient operations and keeping guests satisfied and coming back to build sales, • Assist in creating department schedules as per business levels to ensure budgeted labour costs are met, • Assist in ordering food, beverages, and supplies to ensure all items are in-stock, • Monitors adherence to health, safety and hygiene standards within location, ensure compliance with restaurant security procedures, inclusive of alcohol regulations, ensure a safe working environment by facilitating safe work behaviors of the team and guests, maintains safe, secure, and healthy facility environment by establishing, following, and enforcing sanitation standards and procedures; complying with health and legal regulations; maintaining security systems, • Maintains restaurant cleanliness and upholds esthetics standards of CHG, • Monitor inventory reports and order when necessary, • Resolving in-service guest complaints, • Identifying and following up on tasks related to repairs, cleaning and maintenance to ensure restaurant cleanliness standards are always met, • Attendance and contribution to Banquet Event Order (BEO) and Operations Team meetings INGREDIENTS YOU WILL BRING TO THE TABLE: • 2+ years in a Supervisory role with high volume exposure in a full-service restaurant, • Experience with sales projections, expense budgets, analyzing profit and loss statements, • Focused on building and promoting the company’s vision and values, • Ability to learn and bring "out of the box" ideas to the team, • Self-starter with the ability to motivate and recognize all levels of staff, • Genuine enthusiasm and aptitude for serving people to ensure WOW factor, • Excellent verbal and written communication skills, • High level of business acumen, • Demonstrates strong problem solving skills through ability to diagnose and implement solutions At PLANTA we do not tolerate any form of discrimination in the workplace, including during the recruitment stages. As such, all applications are viewed by our diverse recruitment team that uses a holistic and equitable approach. PLANTA is an equal opportunity employer committed to diversity and inclusion. We are pleased to consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veterans status, Aboriginal/Native American status or any other legally-protected factors. Disability-related accommodations in accordance with the Americas with Disabilities Act during the application process are available upon request.

Job Description Gardena, CA Production Associate Job Description About Sakara: Sakara Life is a rapidly growing organic meal delivery company. Our organic meal delivery program is based on the science behind a whole-food, plant-rich diet. Each meal is nutritionally designed to contain the optimal amount of plant-based protein, hydrating fresh produce and nutrient-dense superfoods to help balance, restore and heal the body, so our clients can look and feel their absolute best. We are currently seeking passionate, positive and hardworking team players to join our Production team in Gardena, CA. We are a performance-based culture and reward hard work and exceptional results with competitive compensation and opportunities for growth. Job Functions: • Portioning soups, sauces, dressings, • Assembling, labeling, and packaging meals, • Must be at least 18 years old, • Must be eligible to work in the U.S., • Must be able to work weekends, holiday and overtime as required, • At least 1 year of related experience preferred, • Comfortable working in a fast-paced warehouse and production environment with strict deadlines, • Must be able to stand and/or sit for extended periods of time, with or without reasonable accommodation, • Exposure to refrigerated or freezer space for extended periods of time, • Excellent "can-do" attitude, strong work ethic, and great team spirit, • Must be able to bend and lift up to 49 pounds, • Ability to work in multiple roles throughout production, • Knowledge in food safety policies including Good Manufacturing Practices (GMPs), • Competitive hourly wages, • Health, dental and vision benefits, • Paid sick leave and vacation, • 401(k), • Family meals Powered by JazzHR tsFhTLhIWq

Moog is a performance culture that empowers people to achieve great things. Our people enjoy solving interesting technical challenges in a culture where everyone trusts each other to do the right thing. For you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. Job Title: Associate Manufacturing Engineer Reporting To: Manufacturing Engineering Manager Work Schedule: Onsite - Torrance, CA Moog Military Aircraft Group is looking for an Associate Manufacturing Engineer to support our Manufacturing Engineering Group at our aerospace plant in Torrance, CA. Reporting to our Manufacturing Engineering Manager, and you will have a 9/80 schedule on-site work in Torrance, CA. Moog Military Aircraft provides flight control equipment and systems to the world's leading military platforms. Headquartered in East Aurora, NY, Moog employs 14,000 employees in 24 countries. At Moog we have a culture of trust and mutual respect; and for you, working with us can mean deeper job satisfaction, better rewards, and a great quality of life inside and outside of work. As an Associate Manufacturing Engineer, you will: \n • Support and develop CNC machining processes; support new and existing CNC machines.\n, • Assure compatibility of engineering drawings and specifications with manufacturing and fabrication capabilities by reviewing drawing and making suggestions for changes and revisions to enhance producibility and prepare detailed manufacturing instructions and programming data under guidance from senior engineers.\n, • Coordinate with various departments and team members to assure the most effective design and use of manufacturing facilities and processes.\n, • Establish standard times for setup and run of each operation on assigned parts.\n, • Assist in the conduct of studies directed towards more efficient manufacturing of parts. Includes making recommendations for new or changes in existing equipment, processes, materials and designs.\n, • Solve shop floor problems associated with parts you are responsible for.\n, • Support timely and efficient processing of parts through the shop by generating operation sheets and manufacturing procedures on assigned parts.\n, • Spend time in the production shop solving problems and improving processes associated with the parts you are responsible for.\n\n Minimum Qualifications: \n • Bachelor of Science Degree in Manufacturing, Industrial or Mechanical Engineering\n, • Some hands-on experience in a Machine Shop such as programming, setting up, running, and troubleshooting CNC machines.\n, • Knowledge of Lean Manufacturing principles\n\n How We Care for You: \n • Financial Rewards: competitive compensation package, annual profit sharing, matching 401k, and the ability to participate in Employee Stock Purchase Plan, Flexible Spending and Health Savings Accounts\n, • Work/Life Balance: Flexible paid time off, holidays and parental leave program, relocation assistance. Our Torrance site has a 9/80 work schedule with every other Friday off.\n, • Health & Welfare: Comprehensive insurance coverage including medical, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages.\n, • Professional Skills Development: Tuition Assistance, mentorship and coaching opportunities, leadership development and other personal growth programs\n, • Diverse and Inclusive Workplace: Employee Resource Groups, cultural events, and celebrations.\n\n #LI-TB1 Salary Range Transparency: Torrance, CA $80,000.00-$85,000.00 Annually Salary Range Disclaimer The base salary range represents the low and high end of the Moog salary range for this position in the given work location. Actual salaries will vary depending on factors including but not limited to location, experience, and performance. The range(s) listed is just one component of Moog's total compensation package for employees. Other rewards may include annual bonuses, employee stock purchase plan, an open paid time off policy, and many region-specific benefits. This position requires access to U.S. export-controlled information. EOE/AA Minority/Female/Sexual Orientation/Gender Identity/Disability/Veteran Moog is an Equal Opportunity Employer, and as such affirms the right of every person to participate in all aspects of employment without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, contact our Human Resources department via phone at 844-367-5787.

Primary location: Carson, California Relocation offered: Employment status: Full-Time Travel: Non-compete: ((req_noncompete)) The estimated base salary for this role is $21.04 per hour. Individual pay is based upon location, skills and expertise, experience and other relevant factors What does it mean to work at Arktura LLC, a subsidiary of Armstrong World Industries? It means being immersed in a supportive culture that recognizes you as a key player in Armstrong's future. We are a large company with a local feel, where you will get to know and collaborate with leadership and your colleagues across the company. Arktura LLC is a widely published company headquartered in a fast-paced design office and manufacturing facility in Los Angeles, CA. We design, develop, and manufacture a variety of façade systems, interior wall and ceiling systems, custom art installations on a full range of state-of-the-art equipment, in our 100,000 sf facility. Working at Arktura is the best! Benefits include 401k with employee match, robust health care options, paid time off and professional development. We have a casual dress code, free snacks, and quarterly events! As a company, we love to engage in community service activities with our local organizations. We provide access to 100's of discounts, specialty savings and voluntary benefits through LifeMart such as car and hotel rentals and auto, home, and pet insurance, legal services, and childcare We support Employee Resource Groups created to connect employees with common interests to promote inclusion and provide perspective. Under the direction of the Quality Control Supervisor, the Quality Control Inspector works independently or in a team of Inspectors/Production Associates within the functional area of the metals or felt value stream. Responsible for the visual, manual, and mechanical inspection of products and/or materials identifying defects/deviations from specifications in accordance with established procedures and guidelines. Essential Duties and Responsibilities include the following. \n • Reads, interprets, and adheres to quality control procedures and standards\n, • Reads and interprets blueprints and/or shop drawings and uses precision measuring tools (such as: calipers, micrometers, etc.) to verify parts and/or material meet specification.\n, • Reads and interprets manufacturing drawings, prints, and specification\n, • Perform visual, manual, and mechanical inspection of products and/or materials\n, • Identifying defects/deviations from specifications and initiate non-conformance reports, and follow issue through to completion; provides communicating regarding repair/re-work to production supervisor\n, • Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database in accordance with the Quality Management System.\n, • Completes, maintains, and organizes QA/QC documentation and records\n, • Inspects incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials.\n, • Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work as needed.\n, • Maintains measurement equipment and coordinates calibration and repairs.\n, • Maintains safe and organized work environment by following standards and procedures\n, • Updates job knowledge by participating in educational opportunities; reading technical publications.\n, • Other duties as assigned.\n\n Supervisory Responsibilities • None\n Travel • None\n Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required \n • Possess basic arithmetic skills\n, • Possess knowledge of personal computers skills.\n, • Proficient use of measuring tools and have a working knowledge of precision measuring tools such as: (tape measurer, calipers, micrometers, etc.).\n, • Must follow all company policies and procedures\n, • Ability to work independently with minimal supervision while balancing multiple projects.\n, • Communication and people skills; team player willing to learn.\n, • Ability to work in a manufacturing environment (i.e., ability to wear required PPE, work in a dusty, hot, non-climate-controlled environment; with stairs, frequent walking, standing and occasional lifting of material).\n, • Ability to work off shift hours in support of plant initiatives.\n, • Must be able to demonstrate proficiency in core production roles within 90 days of hire.\n\n Physical and Mental Demands The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required to: \n • Regularly required to talk or hear\n, • Regularly stand, walk, and may sit for extended periods of time\n, • Regularly use hand-eye coordination, grasp, manipulate, and reach with hands and arms.\n, • Occasionally required to climb or balance, stoop, kneel, reach, push, pull, and perform repetitive motions\n, • Frequently lift and/or move objects up to 50 pounds and occasionally lift and/or move objects that weigh more than 100 pounds using mechanical equipment\n, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus\n, • Due to the open environment of the warehouse, must be able to work in various weather and temperature conditions to include extreme heat, humidity and cold\n\n Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. \n • Office Environment - This position may operate in a professional office environment and is not exposed to adverse environmental conditions. This role may use standard office equipment such as computers, photocopiers, filing cabinets and fax machines in a limited capacity. No PPE is required.\n, • Plant Environment - This position operates in a manufacturing setting and can be subject to extreme cold and hot temperatures; uneven walking surfaces with cords, tools, and other obstacles; intermittent loud noises; and dusty/dirty conditions. Where applicable PPE is required. PPE includes hard hats, safety glasses, earplugs, steel toe/composite boots, and fall protection.\n\n Education and/or Experience \n • High school diploma or GED (required)\n, • Minimum of 1 year of quality experience in metal fabrication or architectural industry (preferred)\n, • Experience with powder coatings and finishes (preferred)\n, • Familiar with various forms of sheet metal, welding, cutting, milling or related processes (preferred)\n\n Certificates, Licenses, Registrations \n • CalOSHA 10 a plus\n, • OSHA Forklift Certification a plus\n, • CPR & First Aid Certification a plus\n\n Why should you join Arktura LLC, a subsidiary of Armstrong World Industries? About Arktura LLC At Arktura, we make design happen. Creativity, expert knowledge and cutting-edge technology shape everything we do whether it's exploring form and function in our standard architectural product, adapting our pre-configured architectural systems to meet project needs, or partnering with clients through our Solutions Studio. Our multidisciplinary team brings together architects, designers, programmers, engineers and artists with a deep understanding of the creative process. We use our collective ingenuity to bridge the gaps between design intent and manufacturing capabilities, creating proprietary software and machinery to meet evolving demands. Please visit our website at to learn more about us. About Armstrong World Industries, Inc. Armstrong World Industries (AWI) is a leader in the design and manufacture of innovative commercial and residential ceiling, wall and suspension system solutions in the Americas. With approximately $1.3B in revenue, AWI has about 3,600 employees and a manufacturing network of twenty-one facilities in North America. At home, at work, in healthcare facilities, classrooms, stores, or restaurants, we offer interior solutions that help to enhance comfort, save time, improve building efficiency and overall performance, and create beautiful spaces. For more than 160 years, we have built our business on trust and integrity. It set us apart then, and it sets us apart now, along with our ability to collaborate with and innovate for the people we're here to serve - our customers, our shareholders, our communities and our employees. We are committed to developing new and sustainable ceiling solutions, with design and performance possibilities that make a positive difference in spaces where we live, work, learn, heal and play. It's an exciting, rewarding business to be in, and we're committed to continue to grow and prosper for the benefit of all of our stakeholders. We hope you join us. Our Sustainability Ambition "Bringing our Purpose to Life" - lead a transformation in the design and building of spaces fit for today and tomorrow. We are committed to: Engaging a diverse, purpose-driven workforce; Transforming buildings from structures that shelter into structures that serve and preserve the health and well-being of people and planet; Pursuing sustainable, innovative solutions for spaces where we live, work, learn heal and play; Being a catalyst for change with all of our stakeholders; and Making a positive difference in the environments and communities we impact. About the location (Carson, CA) Carson is a city in the South Bay and the Harbor regions of Los Angeles County, California, located 13 miles south of downtown Los Angeles. Carson is a thriving, diverse, destination city - a great place to live, work and play with an unlimited future. While Carson is well known as an industrial center with unparalleled access to transportation and the Pacific Rim, it is also a culturally diverse community that is an attractive place to live and work. The city has more than 120 acres of park land divided into 12 parks, 2 mini-parks and sports/recreational facilities that include 3 swimming pools, a boxing center, a state-of-the art sports complex and the Carson Community Center. Arktura LLC is committed to engaging a diverse, purpose-driven workforce. As part of our dedication to diversity, AWI is committed to Equal Employment Opportunity and all qualified applicants receive consideration for employment without regard for race, sex, color, national origin, ethnicity, gender, protected veteran status, disability, sexual orientation, gender identity, or religion. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at by email at [email protected] and let us know the nature of your request and your contact information. Requests for accommodation will be evaluated on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. Come and build your future with us and apply today!

Job Details Job Location Arrowhead Products - Los Alamitos, CA Salary Range $23.00 - $25.00 Hourly Job Shift 2nd Shift Job Summary Performs the in-process and final inspection of products used in airframe and missile manufacturing. Analyze engineering blueprints, process specifications, shop travelers and manufacturing planning documents to determine nature and extent of inspection requirements. Essential Duties and Responsibilities \n • Determines most practical inspection method and technique; plans sequence of operation; selects precision measuring instruments and equipment to dimensionally inspect units. Performs surface table inspections using standard positioning, measuring and layout instruments and equipment. Uses shop mathematics, decimals and fractions in the performance of the work noted herein.\n, • Conducts first article, receiving inspection, in-process inspection and final inspection assignments; visually and dimensionally inspects a wide variety of airframes parts and aerospace assemblies/components.\n, • Witness's first piece part production and certifies acceptability; observes and performs in-process inspection during component build-up and sub-assembly stages; performs final assembly inspection and observes testing operations to assure quality, workmanship and strict compliance with Arrowhead, military space and commercial specifications and standards.\n, • Inspects incoming metallic and fiber materials, plastic and rubber compounds for correct formulation call- out, serialization, identification, cure date and shelf life; verifies vendor and material certifications; checks heat codes, batch and lot numbers to assure product tractability; certifies the proper mixing and blending of bonding agents and adhesives. Inspects reinforced plastic and rubber products for delaminating, blisters, porosity, bond, elasticity, gauge surface smoothness and similar defects or characteristics. Checks configuration and part dimensions with or without the aid of assembly check gauges, fixtures and tooling. Prepares shipping data package for non-metal (soft goods) components/assemblies in accordance with contractual requirements.\n, • Monitors oven and cure processes and records temperature readings and dwell time; performs or observes pressurization and leak test using plant air, nitrogen and helium.\n, • Prepare rework tags, inspection reports and documentation. Coordinates rejection with MRB, engineering and customer representatives for depositions and process refinement. Assembles end item documentation for the review and acceptance of finished products. Prepares and maintains history files, records and reports.\n, • This job description is not all inclusive of all duties. Other duties may be assigned.\n\n Education and Experience \n • Requires High School degree or GED. Related AA or trade school degree preferred.\n, • Requires 5+ years related Quality Assurance inspection experience. Experience must include interface with customer source representatives, government sources, internal departments and senior management. \n, • US Citizenship or permanent residency.\n\n Knowledge, Skills and Abilities To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. \n • ASQ Certified Quality Inspector preferred\n, • Experience working in AS9100 production environment preferred\n, • Must be able to read and analyze engineering drawings and blueprints to determine requirements.\n, • Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T. \n, • Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning\n, • Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.\n, • Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.\n, • Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.\n, • Must be familiar with AS9102 standards and software, and military specifications.\n, • Experience using Net-Inspect standards and software preferred.\n, • Experience must demonstrate ability to direct work activities of QC Inspectors I.\n, • Must interface effective across organizational levels.\n, • Must have good organizational skills and maintain accurate, complete documentation.\n, • Must be able to solve problems including root cause and corrective actions.\n, • Must have excellent communication skills, both written and oral.\n, • Must be proficient with the use of the Internet, MS Word/Outlook. \n\n Supervisory Responsibilities • N/A\n Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. \n • Lift up to 50 lbs.\n, • Push and pull 50 lbs.\n, • Bend Occasionally \n, • Sit, Stand, and Walk Frequently\n, • Talk and Listen Frequently\n\n Special Requirements \n • Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.\n, • ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.\n\n Limitations and Disclaimer The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, this job description does not establish a contract for employment and the content is subject to be changed, modified, or deleted at the discretion of the Company. In compliance with the Americans with Disability Act (ADA) of 1990, the Company will make reasonable accommodations with those individuals with a disability as defined by the ADA.

It's fun to work in a company where people truly BELIEVE in what they're doing! We're committed to bringing passion and customer focus to the business. INTRANET POSTING NOTICE NAME OF THE PETITIONER : C&D Technologies, Inc. JOB TITLE: Sr. Engineer, Manufacturing WORKSITE: Santa Fe Springs, CA ANNUAL SALARY RANGE: $113,069 - $145,000 NUMBER OF HOURS/WEEK: 40 Hours per week, Mon- Fri JOB DUTIES: Ensure processes work at the optimum level for production, quality, and regulatory compliance, to meet demand needs. Perform tests on and document processes and products as directed for new product introduction or process improvement under the requirements of the NSP (Non-Standard Product system. Design, install, and commission new production units, monitors modifications and upgrades, and troubleshoots existing processes. Study and document process capabilities of new and existing equipment makes recommendations for improving capability. Investigate and solve quality short falls as they occur. Ensures that all aspects of an operation or process meet specified regulations. Perform risk assessments, including hazard and operability (HAZOP) studies, for the health and safety of both company staff and the wider community. Assess the availability of raw materials and the safety and environmental impact of the plant. Monitor environmental and operational performance of processes. Work closely with engineers and others to monitor and improve the efficiency, output, and safety of a plant. Make observations and take measurements directly and collect and interpret data from the other technical and operating staff involved. Support the conversion of small-scale processes into commercially viable large-scale operations. MINIMUM REQUIREMENTS: Bachelor's degree or its foreign equivalent in Mechanical Engineering, Electrical Engineering, Industrial engineering or related field. Plus 4 years experience as Process Engineer, Manufacturing Engineer, or related occupation. SPECIAL REQUIREMENTS: Experience must include 4 years in each listed below: In Lean & Six-Sigma methodology; In mechanical/equipment manufacturing such as automated assembly equipment, PLC, and Robots; In analytical skills such as Root Cause analysis for troubleshooting; With technical writing; With Solidworks or AutoCad software; With understanding of quality principles. NOTICE REQUIREMENTS: This notice is being posted in compliance with the relevant DOL regulations pertaining to the filing of Permanent Alien Labor Certification Applications. Any person may provide documentary evidence bearing on the application to the Certifying Officer of the US DOL holding jurisdiction over the location of the proposed employment to the Department of Labor as follows: U.S. Department of Labor, Employment and Training Administration, Office of Foreign Labor Certification, 200 Constitution Avenue NW, Room N-5311, Washington, DC 20210. This notice is being provided to workers in the place of intended employment by the following means: Posting a clearly visible and unobstructed notice, for at least 10 consecutive business days, in a conspicuous location in the workplace on the bulletin board where the employer's U.S. workers can readily read the posted notice, including but not limited to locations in the immediate vicinity of the wage and hour notices. Apply through our website: if you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Job Description The Sales Administration Coordinator will support the Sales Department by managing daily administrative tasks. This role includes coordinating sales scheduling, inventory control, purchase orders, and shipping activities. The coordinator will facilitate communication between Sales, Customer Service, Traffic, and Production teams to ensure smooth order processing and customer satisfaction. Duties and Responsibilities: * Manage daily sales administration tasks, including sales scheduling, inventory monitoring, purchase order processing, and shipment coordination. * Coordinate branded sales activities and maintain communication with the Customer Service Team, Traffic Department, and Sales Scheduling to support sales operations. * Receive and review customer orders and EDI notifications from Customer Service, ensuring accuracy and providing order confirmation to customers. * Follow up and expedite production as needed to fulfill orders, assist with outbound freight rate acquisition, and maintain relevant sales documentation. * Respond promptly to customer inquiries and resolve issues via phone and email. * Communicate shipment updates, schedule changes, and other relevant information to internal departments and customers. * Generate sales and open order reports upon request. * Support the Sales team by coordinating with other departments and managing sample requests. * Perform other duties as assigned. Required Skills/Abilities: * Proficient in Microsoft Word, Excel, and PowerPoint (intermediate level). * Strong communication skills, including active listening, business writing, and customer service orientation. * Ability to coordinate across departments and manage multiple tasks simultaneously. * Problem-solving skills with attention to detail. * Fluency in English; additional language skills are a plus. Education and Experience: * Bachelor’s degree in Business Administration or related field. * Minimum 2-3 years of experience in an office or sales support environment. Work Environment and Physical Demands: * This is a full-time, on-site position, typically Monday through Friday, 9:00 a.m. to 5:30 p.m., with occasional evening hours. * Work is primarily performed in a professional office environment using standard office equipment (computers, phones, photocopiers, etc.). * Requires the ability to talk, hear, and walk regularly. Occasional visits to warehouse and plant areas may be required. * Ability to lift and carry office supplies and materials up to 20 pounds, including files and boxes. Company DescriptionOver 60 years of fine food, products and service. As a division of Kewpie Corporation, Japan's leading manufacturer of mayonnaise, salad dressings, sauces, marinades and related products, California-based Q&B Foods, Inc. is uniquely qualified to produce the highest quality and tastiest products in the US marketplace. Our highly qualified management teams and representatives are dedicated to maintaining our exceptional reputation, which has made Q&B Foods one of the premiere suppliers to leading businesses around the world.Over 60 years of fine food, products and service.\r\nAs a division of Kewpie Corporation, Japan's leading manufacturer of mayonnaise, salad dressings, sauces, marinades and related products, California-based Q&B Foods, Inc. is uniquely qualified to produce the highest quality and tastiest products in the US marketplace.\r\n\r\nOur highly qualified management teams and representatives are dedicated to maintaining our exceptional reputation, which has made Q&B Foods one of the premiere suppliers to leading businesses around the world.

Under direct supervision, to trim, prune, plant, and perform semi-skilled tree maintenance; remove trees on municipal properties; climb trees and operate aerial devices and other tree maintenance equipment for the purpose of tree and root pruning; and perform related work as required. Trims, prunes,

Schwan's Company - JobID: 3D77B7F3931D4886B5A813B46BFD8A53 [Maintenance Mechanic] As a Maintenance Technician at Schwan's Company, you'll: Assist with major repairs, construction, fabrication and installation of new plant equipment; Complete preventive maintenance requirements on conveyor systems an

The Environmental Specialist for. AMVACs Los Angeles Chemical Manufacturing plant will work to achieve and maintain compliance with federal, state, local and other applicable laws and regulations; provide hands-on training and conduct regular audits and enhance and improve AMVACs performance record

Job Description SOAR WITH US Dassault Falcon Jet proudly provides competitive pay, quality benefits and programs that support your career advancement and personal development. Our benefits are designed to support you and your family's health and wellbeing, help you secure a strong financial future and empower you to be successful in all aspects of your work and life. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us! The Mobile Repair Technicians works as part of the AOG Go-team that is responsible for supporting some of the most technologically advanced aircraft in the world that are AOG, in any location, but primarily in North and South America. Once dispatched to the AOG location, the Mobile Repair Technician will perform troubleshooting as needed with support of the Command Center and Engineering Support. They will also perform maintenance and repair of the aircraft systems and return the aircraft to service in a timely manner. PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS): • Perform the required troubleshooting, maintenance, and repair as needed of Falcon Aircraft anywhere in the world depending on their AOG location. To include locations at various points across the Americas and the globe which could include remote areas where modern conveniences may not always be available., • Perform all stated maintenance or basic avionics tasks and associated checks, inspections and/or troubleshooting as identified on the assigned AOG or drop-in aircraft., • Identify all troubleshooting tasks and maintenance tasks to be performed and parts to be ordered for a particular AOG., • Perform status updates of work in progress to Command Center and/or Operations Manager., • Perform all work with the highest level of technical knowledge and experience, in addition to maintaining the utmost level of professionalism with customers, vendors and other flight department or customer personnel on both a personal level and also as a direct representative of the company, Dassault Falcon Jet., • Adhere to all FAA Regulations, the Dassault Repair Station Manual, Operations Manual and all other Quality Manuals and/or Regulations., • Accurately and thoroughly complete all appropriate maintenance, work order, and RTS paperwork, • Be "travel ready" within 1/2 hour during duty time and 2 hours when standby time off base., • Work unscheduled overtime as-needed based on level of AOG activity to include weekends and/or holidays. Advance notice will be provided in all cases when such notice is available to the company but due to the nature of aircraft it is rarely known in advance., • Applicants must have experience pertaining to the forecasted scope of work including but not limited to; troubleshooting, parts replacement, work order documentation, interpretation of technical documentation, customer service and communications skills., • Maintain high level of system knowledge of Falcon Aircraft, • This will be performed by working and training with Engineering Support, • Develop in depth knowledge of troubleshooting techniques and methodologies MINIMUM REQUIRED QUALIFICATIONS: • High school graduate or equivalent., • FAA Airframe and Power-plant certificate, • Equivalent foreign licenses or Repairman’s certificates may be considered, • Valid Driver’s license and Passport, • AOG maintenance experience on large turbine engine aircraft or equivalent other experience, • Capable of interpreting drawings, blueprints, and wiring diagrams, • Capable to understand and follow maintenance manuals and IPC, • Good written and verbal communication skills, • Ability to work independently with minimal supervision ADDITIONAL DESIRED QUALIFICATIONS: • Associates Degree in a related Aviation Science or Maintenance program, • Equivalent military or other aircraft experience can be accepted, • Avionics experience, • Engine/APU experience, • Hands on Falcon maintenance experience primarily on the modern fleet, • WORKING CONDITIONS: Hangar and/or outside environment depending on AOG location * Travel ready (1/2 hour during duty time, 2 hours during standby)

Job DescriptionDescription: Oakridge Landscape, Inc. is a leading Landscape and Construction company. With offices throughout California, including the Central Coast, LA, Ventura, San Bernardino, and the Inland Empire, we are committed to delivering exceptional service and innovative solutions to our clients in the Landscape and Construction industry. We are currently seeking a dynamic and motivated Maintenance Business Development/Sales professional to join our team. In this role, you will be responsible for scouting and connecting with potential clients, aiming to open new accounts while maintaining strong, ongoing relationships with existing customers. The ideal candidate will have a passion for customer service, a strong background in sales. If you're looking for an exciting career where you can grow, contribute to a successful company, and work in a collaborative environment, Oakridge Landscape, Inc. could be the perfect fit for you! Requirements: Responsibilities: • Develop and maintain strong relationships with existing accounts, ensuring consistent communication, client satisfaction, and repeat business., • Develop and execute comprehensive sales strategies to achieve and exceed sales goals., • Actively generate new business leads through various channels including networking, referrals, and targeted outreach., • Conduct on-site consultations with potential and existing clients to assess their tree and shrub care needs., • Prepare and present detailed proposals, effectively communicating the value and scope of our services., • Identify new sales opportunities and proactively pursue leads within the territory., • Understand client needs and present tailored solutions, including tree care services, plant health care, and consulting offerings., • Collaborate with operations and arborist teams to ensure seamless delivery of services., • Attend industry events, trade shows, and networking opportunities to promote company services., • Maintain CRM data and provide regular sales reports to management., • Stay current on industry trends, best practices, and competitor activity., • Build and nurture strong, long-lasting relationships with clients, providing exceptional customer service throughout the sales process and beyond., • Minimum 4 years of proven sales experience, preferably in a field-based role., • Maintenance Landscape experience, • Strong communication, negotiation, and relationship-building skills., • Self-motivated with the ability to work independently and manage time effectively., • Comfortable with CRM systems, Microsoft Office Suite, and digital tools., • Valid driver’s license and willingness to travel within the territory., • Competitive salary, and performance-based bonuses., • Opportunities for career advancement., • Ongoing training and development., • A supportive and collaborative work environment., • Standing periodically throughout the day, • Sitting and standing as needed, • Walking as needed in order to meet with clients at various locations, • Repetitive motion, Keyboard data entry, telephone use, driving a vehicle, • Visually able to read, view computer monitors with or without corrective devices, • Auditory, able to hear and speak on the phone as required to meet job expectations.

Job Description Position: Automation Technician Department: Maintenance Reports To: Maintenance Manager Location: Irwindale, Ca Pay: $39.75/hour Make a greater impact at Bonduelle Americas! Bonduelle Americas is a certified B Corp inviting people to embrace a flexitarian lifestyle with an expanding portfolio of plant-rich products available in and beyond the produce aisle. We operate four facilities and employ nearly 3,000 Associates in the US. Bonduelle Americas is a wholly-owned subsidiary of Groupe Bonduelle (BON.PA), an established global brand with more than 170 years of family heritage bringing the joy of plants to tables around the world. Globally, our ready-to-eat plant-rich food products are grown on 173,000 acres by our grower partners and marketed in nearly 100 countries. Our mission is to inspire the transition toward a plant-rich diet to contribute to people's well-being and planet health. Join us at Bonduelle Americas for an opportunity to advance your career in a culture that places people first. As a valued member of our company, you will work in a mission-driven environment aimed at preserving the planet’s resources while providing healthy plant-based products to millions of consumers around the world. Position Summary: The role of the Maintenance Automation Technician is to help troubleshoot and diagnose equipment using electronic field devices, PLC and controls. The role will also identify new opportunities to drive continuous improvements to the lines, machine centers, processes and asset reliability in general. What you will Do: • Ensure compliance with safety and food safety guidelines, • Troubleshoot, service and fix the computerized systems and automated devices, • Perform routing diagnostic checks on automated systems, • Monitor automated systems, isolate problems and perform repairs, • Drive continuous improvement on the performance of the assets and controls in general, • Analyzing needs and product requirements to create a program design, • Provide feedback on new capital projects to align with current controls and automation, • Assist with integration and automation of new equipment in plant, • Develop new automation processes, • Conducts continuous improvement studies through automation design, cost benefit analysis and maintenance, • Assist in training employees with complex machine centers, • This position must be able to backfill maintenance, supervisory and facilities duties in the event that it is needed., • High school diploma or GED, • Physically able to repeatedly lift 40-pound cases of product, • University, College robotic/engineering technology, or five years related, • Experience in manufacturing with training in PLC programming, • Detail oriented with excellent organizational skills and verbal and written communication skills, • Ability to work effectively with other departments and with external suppliers, • Proficient in Ladder and Block Logic, • Experience with CMMS systems, • Basic computer operations and Microsoft Office and Google Suite (Outlook, Word, Excel, Sheets, Docs, Gmail)

Job Description Automation Controls Technician will primarily focus on supporting field service calls at customer locations. This role involves providing technical support for industrial equipment-diagnosing, repairing, and commissioning automation and control systems. The ideal candidate will have hands-on experience with PLCs, HMIs, motor controls, and automation hardware/software, and will thrive in a technical support role. ESSENTIAL FUNCTIONS • Respond to field service requests to troubleshoot, repair, and update automation and control systems., • Diagnose control system issues (hardware and software) remotely or onsite using test equipment, schematics, and software tools., • Modify and update PLC and HMI programs to support system upgrades, repairs, or customer-requested changes., • May assist with the installation, commissioning, and startup of new automation equipment at Amada facilities or customer sites., • Provide on-site technical support, training, and guidance for field service technicians, Amada manufacturing staff, or customer staff., • Document service support activities, including test results, system changes, and recommended improvements., • Work closely with the engineering team to communicate system updates, field issues, and field or customer feedback., • Associate degree in Electrical, Electronics, Mechatronics, Automation Technology, or equivalent technical training., • 3+ years of experience in industrial automation, field service, or a related technical role., • Proficiency in troubleshooting PLC-based control systems (Omron, Allen-Bradley, Siemens, or similar)., • Experience with industrial networks (Ethernet/IP, Modbus, Profibus, etc.)., • Ability to read and interpret electrical schematics, wiring diagrams, and control system drawings., • Skilled with test instruments such as multimeters, oscilloscopes, and signal generators., • Experience with VFDs, servo drives, and motion control systems., • Knowledge of industrial safety regulations and lockout/tagout procedures., • Familiarity with SCADA systems and industrial HMIs., • Previous experience in a service technician, field engineer, or plant maintenance role., • Strong mechanical aptitude and ability to troubleshoot electromechanical systems., • Excellent problem-solving and customer service skills., • Ability to work independently in the field with minimal supervision., • Excellent communication skills (verbal and written), organized and detailed-oriented., • Experience in creating schematics, flowcharts and other electrical design documentation, • Experience with ladder logic, function blocks, structured text and or sequential function charts., • On site in Brea, CA, • Ability to work harmoniously with others.

Job Description Generator Field Service Technician - DRUPS - Los Angeles, CA Our client is a global provider and manufacturer of industrial power equipment used in emergency back up power applications for mission critical data center facilities operations. They provide design, commissioning oversight and consulting expertise as it pertains to the company's OEM product. This company provides power solutions to many of the world's largest organizations and government facilities and also Enterprise Clients, Colocation Providers and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Ideal candidate will have previous Fly Wheel / DRUPS Generator Experience working in a low to medium voltage environment doing installs and PMs. We are looking for an experienced Critical Facility Generator Technician that will be responsible for installations, scheduled maintenance, troubleshooting and repair of standby power equipment. You will troubleshoot, repair and maintain engines used in standby power equipment – e.g.: generators such as Kohler Generators, CAT / Caterpillar Generators, Cummins Generators, Diesel Generators, Generac Generators, along with Piller, Hitec, Active Power, MTU, Rolls Royce, etc. Diagnose trouble, disassemble engines and examine parts for defects and excessive wear. Candidate must have basic knowledge of electrical components. Responsibilities: • Troubleshoot and work independently onsite at customer's location and perform quarterly, semi-annual and annual preventative maintenance, troubleshooting and repair of standby power equipment to include both electrical and mechanical systems, • Mechanical and Electrical maintenance performed on time and in accordance with contract and OEM specifications, • Maintenance a complete inspection of the control panels as needed, • Administer monitoring /SCADA / PLC software for troubleshooting, • Diagnose / troubleshoot, disassemble engines and examine parts for defects and excessive wear, • Repair and Service for both routine and emergency service on a variety of state-of-the-art critical systems such as: diesel generators, gaseous generators, etc., • Setting generators as needed and balance of plant equipment, • Perform both minor and major overhauls when needed, • Will also be required to replacing electrical components such as relays and sensors when needed, • Read and review single line diagrams / wiring diagrams, • Maintain a constant state of readiness in support of the mission goal of 99.999% uptime, • Create field service reports, daily progress reports, complete site checklists, • Act as a Point of reference for the customer, • Assist clients with telephone support to address technical issues, • Provide technical support to customers, sister companies, distributors, and agents, • Support other engineers during the installation phase on site, prior to the commissioning of the UPS installQualifications:, • 2-6+ years of data center / critical facility generator operations and maintenance and repair experience, • 5+ years of previous Field Service Experience with Electrical or Mechanical systems, • Technical associate level training (or similar), • Electrical background and/or knowledge, • Affinity with control engineering, medium and low voltage, and mechanical engineering, • Strong desire to have a career in maintaining DRUPS / Rotating equipment, • Previous experience servicing OEM Equipment such as: long with Piller, Hitec, Active Power, MTU, Rolls Royce a huge plus, • Experience with CAT / Caterpillar ; Cummins ; Generac ; Kohler also a plus, • Solid Understanding of Critical Electrical and Mechanical / HVAC equipment as it relates to Generators, • Previous experience in the Military / Military Veterans a huge plus! Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc., • Strong verbal and written communications skills as this is a Client Facing / Customer Service position, • Punctual and service driven; Willingness to learn and improve skills, • Solid Acumen for using a laptop as it pertains to receiving correspondence as well as service tickets (need to know how to use a laptop and work order applications), • Travel when required (short notice) After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description The Company: Sungrow Power Supply Co., Ltd. (Stock code: 300274) is a globally recognized renewable energy company, specializing in R&D, manufacturing, and services for solar, wind, energy storage, hydrogen, and electric vehicle solutions. Established in 1997, Sungrow is known for its innovative photovoltaic inverters, wind converters, EV chargers, energy storage systems, and hydrogen production technologies. Its products are sold in over 180 countries, with a cumulative installed capacity exceeding 740 GW by the end of 2024. Sungrow has contributed to national standards and holds numerous core technologies. With multiple industry awards and advanced R&D centers, it ranks among the global leaders in clean energy. Guided by its mission “Clean power for all,” Sungrow continues to drive innovation and global sustainability. The Position: This is a very dynamic and fast-track position reporting to the Field Service Supervisor. The position will be the key member of service team. This position will also be the technical point of the contact person to support sales teams for commercial, industrial and utility-scale businesses. Essential Duties and Responsibilities: • Perform as a lead on more complex field engineering assignments for Battery Storage and PV applications., • Perform pre-commissioning and commissioning of Battery storage systems (AC & DC couple) and PV solar inverters achieving the milestones agreed with utility scale customers, • Perform and/or lead Preventive Maintenance projects as needed, • Perform a variety of engineering assignment involving technology applications involved in the installation, operation, testing and maintenance of central and string solar inverter, • Perform electrical and electronic troubleshooting and testing of solar inverters and its components in the field or in the laboratory. Use of PQA and oscilloscope is required as needed, • Perform and/or troubleshooting in your region assigned to investigate solar plant issues such as DC arrays grid faults, inverter design issues, and utility grid transients, • Provide feedback to the engineering team on possible mechanical and electrical design improvements, • Lead upgrade projects (software and hardware) in the field and interact with customers to explain the technical scope of the project, • Work with customer EMS/SCADA engineers to set-up systems communication and parameters, • Create Field Service procedures if there is not available for trouble-shooting, and maintenance, • Participate on training material some customers as requested but the Training Manager, • Research alternative components that can be used in the field, • Coordinate with R&D engineering in China if required help during troubleshooting, • Take the lead in some projects such as upgrades or retrofit as well as commissioning, • Independently performs a range of field service tasks involving communication with Factory Engineering and Customer’s solar plant engineer, • Coordinate and work closely with other engineering, logistic, financial, and program management disciplines to maintain the solar plants, • Help on the repair activities in the Service center, • Prepare, deliver and submit field reports to customer and management, • Support development of technical proposal and provide comments on the technical content and level of effort of the proposed scope of work, • Conduct site visits, experimental investigations and analyze engineering problems, propose solutions and alterative, and provide recommendations Minimum Requirements: • 7 plus years of overall experience in engineering filed, • 3 years of experience in Battery Storage systems and 2 years for solar inverters, • Must possess the ability to work with test equipment and hand tools as required, • Must possess customer service, problem-solving skills, and possess decision making and analytical skills, • Must possess effective written and verbal communication skills, • Must be able to closely follow instruction and pre-established procedures/SOP to perform the ductions of the job, • Must be proficient in Microsoft Office Suite (Word, Excel, power Point and Outlook), • OSHA, NSPA70A, Electrical Safety Education or Desired License and Certificates: • Bachelor’s degree in Engineering from accredited university or college, • Renewable industry experience is required, • Power Electronics experience is required Competencies: • Technical problem solving/analytical skills, • Self-starter, strong initiatives and an excellent communicator, • System and product level mindset, • Detailed-oriented nature and strong initiative, • Strong technical support focus and a service oriented individual both with Sales team and customers Travel: • 80% Plus Work Location and Status: • Contract-to-Hire, Central or Southern CA area, • No visa/legal sponsorship Compensation: • Compensation commensurate with experience, • Competitive benefits package and employee programs, • Strong personal and company growth opportunities For candidates in the states of California, Colorado, New York and Washington, the anticipated annual base pay for this role is between $36 - $40 per hour. This range does not include any other compensation components or other benefits that an individual may be eligible for. The base salary offered is dependent upon several factors, including but not limited to job-related skills, qualifications, experience, education, location, or other factors related to the role. Sungrow is an equal opportunity employer. Due to strong interests in this position, Sungrow will only reach out to those candidates who best meet the requirements. #LI-LV1

Job Description POSITION TITLE: Environmental Services Associate REPORTS TO: Operations Manager LOCATION: Los Angeles - Pico Union, Ca CLASSIFICATION: Non-Exempt HOURLY RATE: $18.00 PERTINENT INFORMATION: • Work Shift: Friday - Tuesday 8:00AM - 4:30PM, • This position to be filled as soon as possible. Environmental Services Associate Maintains assigned guest and non-guest areas in a clean and sanitary condition by performing specialized cleaning tasks (janitorial), which involve operating heavy-duty equipment and using special cleaning equipment. Environmental Services Associate oversees housekeeping to ensure NHF remains healthy, safe and clean place to support our guest. Responsibilities and Initiatives To help NHF meet its growth goals, the Environmental Site Associate will: • Daily responsibilities include, but are not limited to, collecting trash, room setups, removing & delivering linen, performing regular housekeeping duties and performing special projects as assigned., • Dust furniture, walls, picture frames, equipment, and blinds; clean windows, glass partitions, and mirrors; vacuum, sweep, and mop floors; clean and stock restroom; collect and dispose of trash., • Performs discharge cleaning of guest rooms, nursing units, lounges, bathrooms, ancillary areas, offices, and any other areas assigned. Transports large carts of linen to and from various areas of the facility., • Comply with OSHA’s regulations., • Check and report any findings of contrabands., • Must attend all training and in-service provided., • Ensure the exterior of the program facility also remains clean and clutter free., • Provide support and complete daily physical plant inspections., • Project a positive professional image and adhere to organizational dress code., • Must be flexible to adapt to schedules changes to meet the needs of the facility., • Perform additional tasks/duties as assigned to meet the needs of the facility, notwithstanding primary roles., • High School Diploma or equivalent required., • Minimum 6 months janitorial experience, in Healthcare or Recuperative Care (preferred)., • Ability to perform and prioritize multiple tasks effectively and efficiently., • Some experience working in an environment with mental health, substance use disorder or related health care., • Knowledge of sanitation protocols and cleaning methods., • Ability to operate all types of housekeeping equipment (vacuum cleaners, floor machines, carpet extractors, auto-scrubbers, pressure/steam cleaning machine, etc.)., • Reliable transportation., • Bi-lingual in Spanish Preferred., • TB test required., • Fingerprint live scan /background required. Physical Requirements The duties as described will required frequent standing and walking. The employee will frequently bend/stoop, squat, reach above the shoulders, twist, and turn, kneel, and push/pull. The employee will frequently be required to lift/pull/push/move up to 50 pounds. Must utilize conversational speech for effective verbal communication. Noise level is high in some guest care areas. Benefits PROGRAMS National Health Foundation is addressing the social determinants of health using several research-proven strategies. We are targeting Food Access, with an emphasis on increasing the availability of health and fresh foods in under-resourced communities, Housing, with a focus on providing shelter and care for individuals who have been released from the hospital, the Built Environment, prioritizing the removal of the barriers to health in the Historic South Los Angeles community, and Education, with a focus on risk prevention and support for pregnant and parenting teens to complete their education. For further details on the programs, please visit our site at: .

Temp to Hire - Project Engineer - Food Plant.

Job Description Onecruit Anaheim is looking for a Sanitation Worker located int he city of Anaheim 1st Shift Monday-Friday 5:00am-1:30pm $18-$20 DOE  Adhere to master and daily cleaning schedule  Overall cleanliness of the plant with special attention to blending and production rooms  “Extra Mile” approach----anywhere/anytime anything out of place or dirty…remedy on site.  Maintain a safe work environment  Complete forms as required.  Comply with plant rules and policies Company DescriptionOneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry. OneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively. Our loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow. We understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.OneCruit is a disruptive multi-state human capital business that focuses on staffing light industrial and clerical positions. We are currently in growth mode and expanding into our original roots in executive placement. This is your opportunity to help create and develop a leading brand within the permanent placement industry.\r\n\r\nOneCruit is built on a multilingual leadership team brewed from all walks of life. Our average tenure in the staffing industry is 20+ years. Our time in the industry has shown us how to be the best in the business: no corner-cutting, address risk head-on, be compassionate, and price our services competitively.\r\n\r\nOur loyal customers and associate staff ensure that we're doing things right. We celebrate holidays and family events together and have watched their amazing families grow.\r\n\r\nWe understand that business moves fast, and we stand ready to help at any moment. We leverage technology to help us communicate and move information more efficiently. Our technology partners are the best at what they do, and our platform is scalable beyond our imagination today. However, our technology would be nothing to brag about without our branch operation teams and their ability to drive it. Kudos to them! Join us today.

Job Description RETAIL ASSOCIATE - FLORIST Salary Range: $21 to $23 per hour (DOE and state) Gjusta Goods & Flower Shop: Goods for cooking, gathering, and living - daily essentials created and curated for our restaurants, brought together in a space two doors down from Gjusta Bakery. Transforming our bakery's former dry goods storage space into a space to sell our handmade ceramics, locally produced linens, favorite homewares, homemade pantry, items, cooking staples, vintage clothing, finds from our travels and local flowers, Gjusta Goods & Flower Shop remains an evolving space to share our favorite things with our community. POSITION SUMMARY The Retail & Floral Associate is responsible for assisting all shop needs, retail, customer service, admin tasks such as ordering and inventory, and cleanliness & maintenance of the store, studios, and workshop. The floral duties are combined within the day's responsibilities and include but are not limited to seasonal and local items for shop retail, events, holiday pre- orders, client accounts, and on-demand arrangements and bouquets for consumers; as well as producing requests and maintaining all florals at Gjelina/Gjusta Group properties. ESSENTIAL DUTIES AND RESPONSIBILITIES (Other duties may be assigned): • Report for duty on time and ensure you use the time clock to check in and out., • Manage your time, including taking rest and meal breaks in compliance with California Labor Law., • Maintain high standards of appearance and hygiene that include clean clothes, nails and hair and no heavy perfumes/colognes., • Know our regulars and encourage new guests to become regulars by establishing a rapport that includes the guests' likes & dislikes, • Learn and be able to explain the stories behind the items we make and sell, • Responsible for maintaining knowledge of all items in store (care instructions, uses, etc), • Responsible for opening and closing out register and writing nightly reports, • Responsible for receiving, unpacking, and logging deliveries, • Keep Manager informed when you leave the floor., • Responsible for fulfilling orders promptly as they come through, • Learn shipping procedures and fulfill shipping orders, as they come through, • Consistently check email and respond promptly throughout the day, • Become proficient in our tech platforms (listed, but not limited to): Shopify, Stocky, Flexibake, ADP, CloudBeds, Goci & FedEx, • Understanding the Gjusta brand, vendors, seasonal stems and farm(ers) stories, • Admin correspondence such as orders, client calls, and basic deliverables, • Maintain an organized inbox for the info@ email account, • Maintain an organized Google Drive, • Communicate with Driver team to coordinate delivery needs, • Maintain a clean, organized workspace and shop floor; including but not limited to: trash removal and sweeping the perimeter of the building, sweeping and mopping shop floors, bathroom upkeep, etc.), • Assist in sourcing, processing, and producing weekly floral product for Gjusta Flower Shop, Gjelina Group Properties, Events, Installs, & Wholesale Accounts, • Fulfill daily orders for walk in customers, Gjelina Group properties, deliveries, wholesale, pre orders; as well as Holidays & events, • Understand weekly sales goals and work to meet them, • Work in tandem with other Gjelina Group properties on orders, product, & inventory requests/transfers, • Assist in weekly upkeep on all Gjelina Group property florals, • Opening and closing shop, running daily sales reports, sending end of day emails, • Assist Lead Florist and other teammates in all daily tasks necessary to shop function and financial success, • Previous retail experience, required, • Minimum 1-2 years in the floral/nursery/landscaping industry, • General interest in floral, retail, food, art, ceramics + design, • Strong communication skills: in person, on the phone, and via email, • Organizational skills and attention to detail, • Comfortable working with distributors/vendors and clients, • A good understanding on maintenance, shelf life, and flower/plant buys for Gjusta Flower Shop needs, • Ability to use the point-of-sale system and troubleshoot problems., • Ability to prioritize work activities, provide accurate information and assistance to any management or colleagues' request in a timely and courteous manner, • Ability to keep calm when faced with any unusual situations, • Ability to perform the essential functions of the job, • Ability to work in a team environment, • Ability to take direction & performs other duties as assigned by supervisor / manager, • Ability to self-motivate and take the lead on tasks to ensure the shop is feeling fresh, • Welcome to join any company training within any of the hospitality or food retail spaces if you want to know more about food, wine, and service, • Welcome to attend any and all Flower Market trips with Lead Florist, • Ability to work calmly and effectively under pressure, • Ability to understand and follow written and verbal instructions, • Ability to take direction, • Ability to work in a team environment, • HS diploma required; preferred, but not required., • Must thrive in a fast-paced environment., • Must have a strong work ethic, trust, integrity, and accountability. While performing the duties of this job, this position regularly required you to stand, sit and walk for long periods of time. Able to drive a motor vehicle. Ability to: regularly lift, carry, and/or move up to 20 pounds; frequently lift, carry and/or move up to 30 pounds; occasionally lift and/or move up to 40 pounds; Bending, stooping, reaching, twisting, grasping, pinching, smelling, reaching/lifting above shoulders in a repetitive manner; use hands to finger, handle, or feel; reach with hands and arms; talk and hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Able to walk up and down stairs as necessary. WORK ENVIRONMENTS: The work environment characteristics described are representative of those in these positions while performing the essential functions of this job. The Company is an Equal Opportunity Employer. Reasonable accommodations may be made as needed to enable individuals with disabilities to perform the essential functions. The noise level in the work environment may be quiet to moderate with surrounding areas that may be wet, hot/cold, slippery, or humid. WE ARE AN EQUAL OPPORTUNITY EMPLOYER: THE GJELINA GROUP HAS CREATED A CLIMATE OF PURPOSEFUL INCLUSION, AN ENVIRONMENT WHERE ALL CAN FEEL AFFIRMED, SAFE, VALUED AND GIVEN THE OPPORTUNITY TO THRIVE WITHIN THE COMPANY. WE APPRECIATE AND ACKNOWLEDGE THE DIVERSITY OF HUMANITY, A DIVERSITY WHICH INCLUDES DIFFERENCES, SEX, AGE, RACE, ETHNICITY AND NATIONAL ORIGIN, RANGE OF ABILITIES, SEXUAL ORIENTATION, GENDER IDENTITY, GENDER EXPRESSION, FINANCIAL MEANS, EDUCATION AND POLITICAL PERSPECTIVE. THESE BELIEF AND PRACTICES APPLY TO ALL OF THE ACTIVITIES OF OUR BUSINESS INCLUDING DECISIONS FOR CAREER OPPORTUNITIES OR EMPLOYMENT. Job Posted by ApplicantPro

Position: - Sanitation Manager.Manager is responsible for all sanitation activities in the plant and maintains proper communication across departments.Collaborates and enhances core performance utilizing the continuous improvement process to achieve plant goals.Oversee and establish all training req

Job DescriptionAssociated Ready Mixed Concrete is looking to hire FULL TIME Diesel Technicians level 3. As a valued member of our team, the Maintenance Truck Tech III is required to perform all duties of the level 1 and level 2 technician. In addition, should show proficiency one of the two mayor skill level categories and about 60% proficiency in another category. Category 1 includes internal repairs on engines, transmissions, and gear boxes. Category 2 includes electronic control modules and sensors complex electrical and after treatment repairs Shift Monday - Friday 9:00 pm to 5:30 am Pay Range· Tech III: $35-$40 Travel Required: Estimated less than 25% Benefits· Paid Holidays· Paid Vacation· Medical, Dental, Vision· 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Responsibilities • Appropriate tools required to diagnose, perform mayor repairs in vehicles and to effectively do inspections and routine preventive services., • Able to use compressed gas torch and adjustments., • Effectively do inspections and mechanical repairs to equipment and routine preventive services., • Efficient communication and computer skills for proper file documentation on each job performed., • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Ensures vehicles meet CHP/BIT/PM inspection requirements., • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders., • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems., • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems, transmissions, wheels, hubs and bearings., • Replace, install frame components and basic diagnose of electronic control systems., • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers., • Will install, select, or identify proper tire replacements & legal limit knowledge., • Diagnose and repair vehicle system engine failure and vehicle system transmission & gear box failure., • Follow manufacture service and troubleshooting procedures, diagnose and repair vehicle system., • Diagnose and repair vehicle Aftertreatment systems, Advance Electrical systems, Air brake system and brake valve diagnose., • Diagnose and repair vehicle Hydraulic system failure., • Diagnose and repair HVAC failure diagnose., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment., • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards.Minimum Education and Experience, • High school diploma., • 4+ years of heavy-duty tractor maintenance experience., • 4+ years experience of work on electrical, mechanical, and hydraulic systems., • Must have own tools.Preferred Education and Experience, • Associates degree, technical school certificate or equivalent experience., • 5+ years of heavy-duty tractor maintenance experience., • 5+ years experience of work on electrical, mechanical, and hydraulic systems. Associated Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job DescriptionAs a valued member of our team, the Maintenance Truck Tech II is required to perform all duties of a level 1, in addition to perform basic to mid-level repair skills on at least 80% of all vehicle areas including hydraulic systems, engine and transmission accessories. Effective skills in welding, use of torch and A/C systems. Not including electronic or high-level diagnostics and repairs on all vehicle areas; also, not including internal component repairs of engine, transmissions, and gear boxes Position Type/Expected Hours of Work This is a full-time position. Mondays - Fridays from 9:00 am – 5:30 pm. Pay Range Tech II: $30-$35 Benefits· Paid Holidays· Paid Vacation· Medical, Dental, Vision· 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Essential Functions: • Appropriate tools required to diagnose and perform mayor repairs in vehicles., • Able to use compressed gas torch and adjustments., • Effectively do inspections and mechanical repairs to equipment and routine preventive services., • Efficient communication and computer skills for proper file documentation on each job performed., • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders., • Ensures vehicles meet CHP/BIT/PM inspection requirements., • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems., • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems , transmissions, wheels, hubs, and bearings., • Replace, install frame components and basic diagnose of electronic control systems., • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers., • Will install, select, or identify proper tire replacements & legal limit knowledge., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment., • Efficient organizational skills for scheduling and periodization of jobs., • Will prepare metal surfaces and welding techniques to complete assigned tasks., • Tracks and schedules with operations or manager on vehicles status and updates., • Ability to read and interpret documents., • Basic math and measurement skills., • High school diploma., • 3+ years of heavy-duty tractor maintenance experience., • 3+ years experience of work on electrical, mechanical, and hydraulic systems., • Associates degree, technical school certificate or equivalent experience., • 4+ years of heavy-duty tractor maintenance experience., • 4+ years experience of work on electrical, mechanical, and hydraulic systems. A&A Ready Mixed Concrete es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job DescriptionCemak Trucking is looking to hire FULL TIME Diesel Technicians level 2 or 3. As a valued member of our team, the Maintenance Truck Tech III is required to perform all duties of the level 1 and level 2 technician. In addition, should show proficiency one of the two mayor skill level categories and about 60% proficiency in another category. Category 1 includes internal repairs on engines, transmissions, and gear boxes. Category 2 includes electronic control modules and sensors complex electrical and after treatment repairs Shift Saturdays and Sundays from 12:00 pm – 10:30 pm Mondays and Tuesdays from 2:00 pm – 12:00 am Pay Range Tech II: $30-$35 Tech III: $35-$41 Travel Required: Estimated less than 25% Benefits· Paid Holidays· Paid Vacation· Medical, Dental, Vision· 401k Retirement · $100 credit for boots after 90 days · Uniforms provided · Tool allowance when applicable · Monthly credit for cellphone use Responsibilities • Appropriate tools required to diagnose, perform mayor repairs in vehicles and to effectively do inspections and routine preventive services., • Able to use compressed gas torch and adjustments., • Effectively do inspections and mechanical repairs to equipment and routine preventive services., • Efficient communication and computer skills for proper file documentation on each job performed., • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Ensures vehicles meet CHP/BIT/PM inspection requirements., • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders., • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems., • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems, transmissions, wheels, hubs and bearings., • Replace, install frame components and basic diagnose of electronic control systems., • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers., • Will install, select, or identify proper tire replacements & legal limit knowledge., • Diagnose and repair vehicle system engine failure and vehicle system transmission & gear box failure., • Follow manufacture service and troubleshooting procedures, diagnose and repair vehicle system., • Diagnose and repair vehicle Aftertreatment systems, Advance Electrical systems, Air brake system and brake valve diagnose., • Diagnose and repair vehicle Hydraulic system failure., • Diagnose and repair HVAC failure diagnose., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment., • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards.Minimum Education and Experience, • High school diploma., • 4+ years of heavy-duty tractor maintenance experience., • 4+ years experience of work on electrical, mechanical, and hydraulic systems., • Must have own tools.Preferred Education and Experience, • Associates degree, technical school certificate or equivalent experience., • 5+ years of heavy-duty tractor maintenance experience., • 5+ years experience of work on electrical, mechanical, and hydraulic systems. Cemak Trucking es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job DescriptionDescription: Job Summary: The Maintenance Seamer Mechanic is responsible for maintaining, adjusting, troubleshooting, repairing, and overhauling a variety of can seamers to ensure they operate safely, efficiently, and to quality standards. Key equipment includes Angelus 61H and Continental 2003 seamers. This role also serves as a Line Mechanic for additional plant equipment in the Filling Room and related areas, including fillers, conveyors, cooking tanks, sterilizers, basket loaders/unloaders, labelers, packers, and palletizers. The role involves mechanical, hydraulic, pneumatic, electrical, and steam systems and requires a strong focus on seam integrity and food safety. Duties cover equipment set-up, changeovers, preventive and emergency maintenance, fabrication, installations, and addressing quality and safety issues. Essential Functions: • Perform all job duties in a safe and food-safe manner, following GMPs and company safety policies., • Can Seamers: Angelus 61H and Continental 2003, ensuring seam specs are met., • Filling Room & Sterilization Equipment: Hydraulic dumpers, meat conveyors, dicers, metal detectors, meat/corn/broth fillers, check weighers, can conveyors, ink jet printers, cooking tanks, sterilizers, basket conveyors, loaders/unloaders, pumps, depalletizers., • Packaging Equipment: Can dryers, X-ray machines, can and case labelers, case packers/printers/conveyors, palletizers., • Perform seam teardowns every 3 hours using manual and scope methods; document findings and take corrective action as needed., • Complete changeovers on seamers, fillers, and empty can lines as required., • Conduct deep overhauls and rebuild gearboxes/drives as needed using OEM documentation., • Carry out preventive maintenance (PM) and repetitive work orders per schedule; ensure proper documentation., • Disassemble and reassemble equipment for sanitation., • Modify or install equipment and support capital and improvement projects with the Engineering team., • Use the Computerized Maintenance Management System (CMMS) to manage all PMs and work orders., • Collaborate with the Planner/Scheduler to update and maintain work order schedules., • Communicate key updates to the Maintenance Supervisor and Lead; support Operations Leads during equipment adjustments or line issues., • Work with the Parts Coordinator to ensure availability of critical parts; properly sign out all items per maintenance policy and generate part requests as needed., • Ensure all product contact surfaces are protected during work; complete proper cleanup after each task., • Account for and clean all parts, tools, and debris after each job., • Promptly complete all required documentation and reports., • Immediately report equipment malfunctions or unsafe conditions to the Supervisor., • Maintain professional conduct with team members, contractors, and other departments., • Take initiative to resolve issues and make sound decisions when appropriate., • Train other mechanics on seamer maintenance, seam inspections, and related activities., • Operate forklifts, pallet jacks, high lifts, and other company vehicles after certification through Juanita’s Foods., • Provide personal hand tools as required for the role., • High school diploma or GED required., • Completion of formal Seamer School training required., • Minimum 5 years of experience as a manufacturing line mechanic, preferably in the food industry., • At least 5 years of hands-on experience working with can seamers and fillers, specifically Angelus and Continental seamers., • Seamer training certificates for Angelus 61H and Continental 2003 models., • Proficient in manual and scope-based seam teardown inspections, including documentation., • Working knowledge of hydraulic, pneumatic, and pump systems., • Skilled in lubrication practices for industrial equipment., • Strong troubleshooting and critical thinking skills., • Familiarity with Lockout/Tagout (LO/TO) procedures., • Experience in high-speed manufacturing environments., • Able to interpret and work from manufacturer manuals and equipment specifications., • Electrical troubleshooting experience is a plus., • Welding and fabrication experience (minimum 3 years) is a plus., • Forklift and high lift certifications are a plus., • Solid understanding of preventive, corrective, and predictive maintenance practices., • Capable of reading and interpreting mechanical diagrams and schematics., • Effective verbal and written communication skills in English., • Basic computer proficiency, including email, internet, spreadsheets, and CMMS software., • Work is primarily performed in a manufacturing plant with exposure to noise, temperature fluctuations, and industrial chemicals., • Frequent standing, walking, bending, crouching, reaching, pulling, and lifting., • Regular use of hand tools requiring gripping and repetitive motion., • Ability to lift and carry up to 50 pounds safely.

Job DescriptionAs a valued member of our team, the Maintenance Truck Tech III is required to perform all duties of the level 1 and level 2 technician. In addition, should show proficiency one of the two mayor skill level categories and about 60% proficiency in another category. Category 1 includes internal repairs on engines, transmissions, and gear boxes. Category 2 includes electronic control modules and sensors complex electrical and after treatment repairs Pay Range· Tech III: $30- $40 Travel Required: Estimated less than 25% Responsibilities • Appropriate tools required to diagnose, perform mayor repairs in vehicles and to effectively do inspections and routine preventive services., • Able to use compressed gas torch and adjustments., • Effectively do inspections and mechanical repairs to equipment and routine preventive services., • Efficient communication and computer skills for proper file documentation on each job performed., • Knowledge and ability to identify the proper name of all visible parts and non-visible parts in a vehicle., • Maintain a high standard of safety, cleanliness, and efficiency in all maintenance., • Ensures vehicles meet CHP/BIT/PM inspection requirements., • Will maintain appropriate record keeping for Bit inspections, DVIRs, work done description and work orders., • Replace, install and service brake systems, cab and sheet metal components, engine accessories, HVAC systems, hydraulic systems, and lighting electrical systems., • Replace, install and service mixer truck equipment, product transfer systems, starting systems, steering systems, transmissions, wheels, hubs and bearings., • Replace, install frame components and basic diagnose of electronic control systems., • Replace, install, service and diagnose charging systems, clutches and drive lines, and suspensions systems., • Will inspect and identify vehicle conditions on different types of equipment such as tractors, trailers, or mixers., • Will install, select, or identify proper tire replacements & legal limit knowledge., • Diagnose and repair vehicle system engine failure and vehicle system transmission & gear box failure., • Follow manufacture service and troubleshooting procedures, diagnose and repair vehicle system., • Diagnose and repair vehicle Aftertreatment systems, Advance Electrical systems, Air brake system and brake valve diagnose., • Diagnose and repair vehicle Hydraulic system failure., • Diagnose and repair HVAC failure diagnose., • Complete all maintenance duties as assigned, and repair all equipment on property including, but not limited to, diesel, plant, or yard equipment., • Perform routine and preventive maintenance to keep vehicles and equipment in compliance with DOT and company standards.Minimum Education and Experience, • High school diploma., • 4+ years of heavy-duty tractor maintenance experience., • 4+ years experience of work on electrical, mechanical, and hydraulic systems., • Must have own tools.Preferred Education and Experience, • Associates degree, technical school certificate or equivalent experience., • 5+ years of heavy-duty tractor maintenance experience., • 5+ years experience of work on electrical, mechanical, and hydraulic systems. Associated Ready Mix Inc. es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera. #zr

Job DescriptionCompany Description Vestcom is the industry leader in technology-driven shelf-edge solutions for Retailers and CPGs. Our data-integrated media solutions drive sales and loyalty, engaging shoppers where it matters most – the point of decision. Our patented innovation has been trusted by top retailers for more than 30 years to drive productivity and profitable growth. For our growing team of over 1000 employees, Vestcom offers the stability of an established company with the entrepreneurial spirit and fast-paced environment of a start-up. Vestcom’s core values are at the heart of our organization, representing our fundamental beliefs and serving as our guiding light in for how we conduct business and interact with each other. • OUR TEAMS - Our colleagues and our client define our team., • OUR INTEGRITY - Our colleagues and clients rely upon us to deliver., • OUR INGENUITY - Our colleagues and clients look to us for unique solutions. SUMMARY To complete all tasks involving the manufacture and maintenance support of all machines in the production facilities. Set up and operate a variety of machine production equipment. Fit and assemble parts to fabricate or repair machine tools and maintain industrial machines. Ensure that equipment and processes are maintained in a preventive fashion to ensure optimum reliability and up time. Essential Duties and Responsibilities include but are not limited to the following: * Assemble new and rebuild existing equipment. * Setup and install equipment, upgrades and retrofits off-site. * Provide training for operation of new equipment. * Troubleshoot and repair mechanical equipment on and off-site. * Operate powered and manual hand tools. * Electrical work * Read electrical prints * Replace faulty parts * Pull and terminate wires * Troubleshoot problems * Pneumatic installation and repair. * Operate 9514XLS, Robot and other converting equipment. * Operate fork lift. * Maintain and manage parts inventory * Order and receive new parts * Train operators on new and refabricated equipment * Provide support to department for plant improvement or facility projects, as needed. * Must be available to work overtime days/hours as needed for emergency repairs. * Must be able to work proficiently with minimal supervision. * May be required to travel to remote facilities up to 70% of the time. * Other duties as assigned by management. * Regular attendance is an essential function of this position. * Compliance with applicable Company policies concerning maintaining a drug free workplace is required. * Compliance with all Company policies including all safety policies and procedures is required. Qualifications Education and/or Experience * High school diploma or general education degree (GED); or five years related experience and/or training; or equivalent combination of education and experience. * To perform this job successfully, an individual should have basic computer knowledge to include Google, MS Word and Excel. The hourly rate for this position is $21.91 - $29.22/hour The hiring wage rate range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range. In some circumstances, this may be above or below the range (based on various factors, including, but not limited to, a candidate’s relevant skills, experience, education and training, location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position). That may change, depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable laws. Additional Information Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job in a manufacturing environment. The Physical demands described here are representative of those that must be met by an employee to successfully perform the functions of this job in a manufacturing environment. * Job requires standing over 75% of the time on a daily basis. * Ability to lift 50 pounds with full range of motion. * Ability to work from standing, kneeling and stooping positions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; outside weather conditions; extreme cold, extreme heat; risk of electrical shock and vibration. The employee is occasionally exposed to fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually loud. Continuous, high to moderate levels of noise; require hearing protection to be worn at all times. Exposure to chemicals, inks, and coatings. Require the appropriate PPE to be worn when handling. All your information will be kept confidential according to EEO guidelines. #HP

Landscape Architecture Instructor. Course areas in the Landscape Architecture Program span subject areas including but not limited to Landscape Design, Planting Design, Site Planning, Professional Practices, Hand and Digital Graphic Design, Plant Identification, CA Native Plants, Storm water Managem

Job Description Classification: Union, Non-Exempt Reports to: Chief of Security JOB DESCRIPTION Summary/Objective The armed Security Guard is responsible for maintaining the overall safety of Santa Anita Park. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Observe and report any medical, criminal, hazardous incidents or suspicious activities or subjects, and take appropriate actions, • Observe and report any potential incidents, liability, or damage to company property and take appropriate actions, • Professionally interact with Santa Anita patrons and employees and be willing to assist on a regular basis – including complaints, directions, or questions, • Assist with escort details as necessary, • Maintain good working conditions in assigned areas and report any safety or maintenance repairs necessary to Plant Department, • Write basic field interviews, reports, and observations including photographs, • Be able to take control of and secure an area during a medical, critical, or hazardous situation and assist in investigations with Area Managers, • Effectively communicate through telephone and radio, • Ensuring that your weapon is well maintained and secure at all times, • Utilizing your weapon in times of extreme attack, when non-violent options have been exhausted, • Attending refresher training in weapons use, if applicable Competencies • Problem Solving/Analysis, • Communication Proficiency, • Ethical Conduct, • Customer/Client Focus, • Stress Management/Composure, • Thoroughness, • High school diploma, • Valid driver’s license with clean record Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description Classification: Union, Non-Exempt Reports to: Chief of Security JOB DESCRIPTION Summary/Objective The unarmed Security Guard is responsible for maintaining the overall safety of Santa Anita Park. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Observe and report any medical, criminal, hazardous incidents or suspicious activities or subjects, and take appropriate actions, • Observe and report any potential incidents, liability, or damage to company property and take appropriate actions, • Professionally interact with Santa Anita patrons and employees and be willing to assist on a regular basis – including complaints, directions, or questions, • Assist with escort details as necessary, • Maintain good working conditions in assigned areas and report any safety or maintenance repairs necessary to Plant Department, • Write basic field interviews, reports, and observations including photographs, • Be able to take control of and secure an area during a medical, critical, or hazardous situation and assist in investigations with Area Managers, • Problem Solving/Analysis, • Communication Proficiency, • Ethical Conduct, • Customer/Client Focus, • Stress Management/Composure, • Thoroughness, • High school diploma, • Valid driver’s license with clean record Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Description About Us A home away from home where creatives celebrate music, art, design and culture. We are a private membership club open to members and their guests only. Our Culture At Living Room, we are deeply passionate about our work and we believe that hospitality is a noble pursuit because it’s fundamentally human and an ideal worth chasing. We seek out those that share these beliefs as an inherent second nature and our team member culture is how we bring this idea to life. Our guiding pillars- Be Human, Be Curious, Be Empathetic, Be Soulful, and Be Honest demand that we embody these values in all that we do. The Role We are seeking a Safety Agent to join Living Room. In this role, you will play a pivotal role in ensuring the safety and security of our members, guests, and team. Responsibilities • Safety Protocols: Implement and adhere to established safety protocols in accordance with Living Room's values, ensuring they are followed consistently., • Training & Education: Participate in training sessions and educate team members on safety measures and emergency response procedures, contributing to a culture of preparedness., • Incident Response: Assist in responding to safety incidents, including investigations and support in implementing corrective actions., • Compliance: Stay informed about relevant laws and regulations, ensuring personal compliance with safety standards and certifications., • Emergency Preparedness: Participate in emergency response drills and help ensure team readiness for various situations., • Safety Checks: Conduct routine safety checks and inspections, promptly reporting potential hazards and assisting with risk mitigation., • Security Patrols: Perform routine patrols of the Living Room property to maintain a secure and welcoming environment for members and colleagues., • Incident Records: Assist in maintaining records of safety-related incidents, including criminal, accidents, or safety issues., • External Communication: Act as a point of contact and communicate with municipal and state Law Enforcement Agencies and Fire Department when necessary., • Security System Support: Assist in monitoring security systems, including fire, earthquake, and property alarms, and report any issues., • Property Safety: Help ensure the safety of the Living Room's physical plant, such as lighting, surveillance, and locks., • Event Safety: Support safety measures for Living Room events by following established protocols., • Emergency Procedures: Assist in conducting educational programs for management and staff related to disaster planning, crime and fire prevention, and First Aid/CPR/AED., • Supply Maintenance: Assist in keeping emergency supplies, including AED machines, properly maintained., • Violation Reporting: Report any observed violations of safety rules and assist in addressing them appropriately., • Legislation Awareness: Stay informed about local, state, and federal legislation relevant to safety practices within Living Room. The Ideal Candidate • A passion for promoting and ensuring a safe working environment where the well-being of employees is a top priority., • An understanding of safety regulations, compliance standards, and best practices in occupational health and safety., • Strong communication and interpersonal skills to effectively convey safety protocols, collaborate with cross-functional teams, and encourage a safety-conscious culture., • The ability to assess, mitigate, and manage risks, as well as develop and implement comprehensive safety programs and protocols., • Minimum two years of security officer experience., • Current or in-progress BSIS guard card acquisition., • AED/CPR/First Aid certification (or in the process of obtaining)., • 24/7 availability and reliable transportation., • High school diploma or equivalent., • Strong communication skills with diverse individuals., • Proficiency in following both written and verbal instructions., • Ability to work independently and collaboratively., • Preference for candidates with security/military/law enforcement experience., • Report writing proficiency., • Competency in operating and maintaining site-specific security systems., • Detail-oriented and excels in a fast-paced environment., • Basic verbal communication skills., • Multitasking ability and performs well under pressure., • Willingness to work nights, weekends, and holidays as needed to meet business requirements. Why Join The Team • 100% Healthcare coverage including Dental and Vision, • Wellness Benefits for a balanced lifestyle, • Competitive 401k match for your financial future, • Career Growth opportunities that empower you, • Leader in Development Program, • Learning & Development for your growth with us, • Immersive Trainings that nurture your talents, • Fun and Exciting Team Member Events that build bonds, • Free Team Member Meals to fuel your creativity If you are a creative, passionate individual with a talent for creating unforgettable experiences, we want to hear from you. Join our team and help us take our members on a journey of discovery through art, design, and culture. Live better, leave better - be you.

Job DescriptionCLASS A TRUCK DRIVER GRAVEYARD SHIFT LOS ANGELES COUNTY - Part Time (Up to 28 hours per work week) We are hiring Class A Drivers with previous experience for local work delivering aggregate and cementitious materials to various locations. Drivers must be safe and dependable. • Starting pay is $28 per hour after paid training ($20.00). Plus, a $5.00 incentive per hour and $1.00 graveyard incentive., • Schedule: On call graveyard shift., • Plant Locations: Los Angeles County (Training and regular work schedule may be at different locations) • Responsible for the safe and efficient delivery of material to and from ready mixed concrete plants., • Perform Pre and Post trip inspection and maintain driver logs within the DOT guidelines. TRUCK DRIVER QUALIFICATIONS AND REQUIREMENTS: • Truck Driver must have a valid Class A commercial driver's license and doubles/triples endorsements. (No automatic restriction), • Truck Driver record must not contain any reckless driving offenses, leaving the scene of an accident, DUI's, etc., • Be able to communicate effectively with customers and Dispatch, while representing the company in a professional manner. CONDITIONS OF EMPLOYMENT: Successful Class A Truck Driver candidate must submit to post offer pre-employment physical examination, drug/alcohol screen and background check. This Organization Participates in E-VerifyEsta Organizacion Participa en E-Verify CEMAK Trucking is proud to be an Equal Opportunity Employer (EOE) and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. CEMAK Trucking es una compañía EEO/AA (igualdad de oportunidades/acción afirmativa) y no discrimina por motivos de raza, color, religión, credo religioso, sexo, orientación sexual, identidad o expresión de género, origen nacional, ascendencia, edad, condición física odiscapacidad mental, condición médica, información genética, estado civil o familiar, estado militar o de veterano, o cualquier otra característica protegida por la ley federal, estatal o local en los programas o actividades que opera.

Job DescriptionPosition OverviewJob Duties This position has no current marketing description for this job code. Recruiter - Please fill in the applicable sections to create your job posting that is correct for your position. Hiring Manager - Please include the applicable verbiage in the Approval Notes section within the requisition; a recruiter will update the posting language during the recruiting approval step. QualificationsAdditional InformationCompany OverviewDivisional Overview POSITION: Herbicide Project Manager TYPE: Full-Time, Salary POSITION LOCATION: Southern California Including: Los Angeles, Riverside, Ventura, Orange, San Bernardino Counties, as well as Eastern California Including Tulare, Inyo, and Mono Counties Davey Resource Group, Inc. is a wholly owned subsidiary of the employee owned Davey Tree Expert Company. Our job is to help our clients provide a safe and reliable power source through proper vegetation management practices. Do you want a career working outdoors? Do you care about sustainability? Do you want a career with stability and growth opportunities? The Davey Resource Group (DRG) is currently hiring certified arborists, professional foresters, horticulturalists, natural resource specialists, environmental scientists, GIS technicians, and plant and outdoor enthusiasts to join our workforce. RESPONSIBILITIES: * Pro-actively promote safety and maintain a safe work environment * Manages internal quality observations including Quality Assurance, Quality Verification, Work Verification and Herbicide Team inspections * Communicates with peers, exchanging ideas or gathering information on overall program plan and goals within a specific functional area of operations * Manage and oversee daily related vegetation operations to support client peers * Contributes to the implementation and creation of new concepts, processes and ideas to further vegetation management program advancement. * Provide client and contractor support * Respond to customer complaints and concerns * Manages emergency work for severe storms, wildfires and power shutoff events * Interact with local public agencies (i.e. State, County, City, Fire Department, etc.) * Conduct Safety Observations * Receive California Qualified Applicators License within 6 months of Hire DESIRED QUALIFICATIONS: * Two or four year degree in horticulture, forestry, urban forestry, environmental science, natural resources or related discipline * Organizational skills, excellent communication skills, and attention to detail * Ability to travel throughout service territory as needed REQUIRED QUALIFICATIONS: * 3 years of utility herbicide management experience * Clean DMV driving record and ability to drive and operate a 4x4 vehicle WHAT WE OFFER: We invest in our employees by offering industry-leading training, technology, and benefits that lead to a rewarding and safe work experience for employees at all levels. * $70,000 - $75,000 salary (dependent on experience and professional certifications) * Group health plans * Short-term and long-term disability insurance * Life insurance * Paid parental leave * 401k with up to a 4% company match * Employee Stock Purchase Plan: Opportunity to buy company stock at a 15% discount * Holidays and paid time off * Payroll savings plan * Charitable matching gift program * Employee referral bonus program * Employee Educational Scholarship * Davey Family Scholarship * 20% discount on all Davey services * Cell phone discounts * Vehicle purchase discount program * Plus, so much more! ADDITIONAL INFORMATION: At Davey, our values are our compass and core to everything we do. Davey Resource Group values itself on Safety, Integrity, Expertise, Leadership, Stewardship, and Perseverance. Pre-employment drug screen and background check required. EQUAL EMPLOYMENT OPPORTUNITY EMPLOYER: The Davey Tree Expert Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. ACCOMODATIONS: If requested by an employee or otherwise as required by law, reasonable accommodations will be made to enable employees with disabilities to perform essential job functions.

A Delivery Driver, is responsible for transporting packages from a packaging plant or warehouse location to businesses and residential properties.Their duties include loading into their vehicle, using a navigation system to map their route and delivering packages to the correct addresses in a timely

Job DescriptionWhy CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on the job training, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking Permitting Project Managers to oversee all activity with regards to his or her projects including, but not limited to, supervision of employees, project staffing, customer needs, workflow, service level agreements (SLA) adherence, financial performance, timely invoice approval, quality control, and all other aspects of work related to his or her projects. This role is customer facing requiring clear communications skills, both verbal and written, as well as polished and professional personal interactions. Responsibilities • Liaison between cities and jurisdictions, and build meaningful, long-term relationships in various markets., • Guide teams and participate with research and prepare documentation for required permits, right of ways, easements, and land use for telecom projects., • Create and maintain reports, while tracking progress of multiple projects – for complying with conditions of approvals from municipalities for meeting customer delivery deadlines., • Obtain all necessary permitting / zoning approval from Federal, State, and local agencies - Inform other internal functional groups about requirements and regulations of government entities and municipalities to assist with compliance with general conditions of approvals at permit and construction stages of the project, and to meet project timelines., • Oversees the preparation and submission of permit packages for permit applications adhering to strict standards and regulations., • Monitor staffing needs in the project group along with maintaining staffing projections., • Ensure that a Scope of Work is in place for all their projects., • Create and adhere to revenue, gross profit, accounts receivable, and staffing forecasts., • Act as the liaison between customers and the internal operations of the project group. This is to ensure that customer’s expectations are met and maintain goodwill for future business., • Execute project implementation/startup and continuous production management., • Monitor projects to improve the quality of the work and to reduce the time and cost of project throughput., • Create and promote the company image through exercising sound and ethical business practices as related to employees, the public and customers. This includes ensuring that service and quality provided to customers is superior to that of our competition., • Meet regularly with key personnel to ensure that information flows in both directions and to ensure that stated goals and objectives are met., • Implement corrective actions, as appropriate, on any project to meet cost targets, and completion schedules., • Ensures subordinates’ abilities are adequate for their responsibilities and develops training and cross training for ongoing skill development., • Assist personnel with interpreting customer drawings, project documentation, and technical specifications., • Conducts performance reviews for all direct reports. Does follow up on reviews with substandard grading. Create an environment in which the rating of an average employee is continually challenged. Create goals for employee during review and have mid-year follow up on said goals., • Complete invoicing within Service Level Agreements including follow up on unpaid invoices. Make sure purchase orders are in place prior to work startup., • Perform other related duties as assigned by their supervisor. Qualifications • 5+ years’ experience in permitting design, government affairs or related work in a Utility / Permitting environment in a related industry preferred., • 5+ years of Project Management experience in utility permitting or related field preferred., • In-depth understanding of NESC 202X code requirements preferred., • Regulatory Compliance Expertise: Advanced understanding of local, state, and federal regulations related to underground utilities, coupled with the ability to effectively incorporate these regulations into permit drawings,, • Advanced understanding of Telecom OSP Engineering and Construction standards to apply design standards to underground and aerial pole line cable plant, including Joint Use Design, Pole Replacement, Primary Service, and Reliability/Maintenance Design., • Proven leadership of a Make Ready Team to Perform structural loading calculations using O-Calc or Spida-Calc in accordance with NESC and pole owner protocol through inventory and analysis of pole type and class, riser details, attached facility type including weight and diameters, span footages, drip loops etc., • Ability to create 3-dimensional model of poles in O-Calc and Spida-Calc to provide results to ensure safe and proper attachment to power and telecommunication poles., • Analytical and observational skills, which demonstrate ability to, plan projects, review/recommend technical specifications, coordinate staffing needs, communicate, and manage all aspects of a project., • Proven ability to effectively prioritize and execute tasks in a high-pressure environment is crucial., • Effectively work independently and in a team-oriented, collaborative environment is essential., • Proven ability to solve problems creatively., • Persuasive, encouraging and motivating with the ability to elicit cooperation from a wide variety of sources, including upper management, clients, and other departments., • Ability to interact with colleagues, vendors, and customers/clients of all demographics and professional levels. Also, be able to gain credibility with them to effectively complete tasks., • Must be willing to learn new product lines and technologies to serve the departmental needs and goals., • Able to handle employee issues and confrontation effectively and in a timely manner., • History of successful customer communications and relationship management. Additional Information • This is a customer-facing position which will require up to 50% travel., • Must have a valid driver’s license., • Must have good, reliable home internet. Shift is Monday through Friday between the hours of 8:00am-5:00pm CST but must have flexibility to work outside normal business hours. Compensation: base salary range 75k-95k plus incentives. Benefits: healthcare, retirement, paid leave (e.g., sick leave, PTO, company holidays), life insurance, AD&D, short-term disability, FSA, education reimbursement, wellness reimbursement, and employee assistance program (EAP).

Job DescriptionSEC Construction Management SEC is a construction project management firm, with a niche expertise in commercial and utility scale solar power plant developments. We love challenges, excel in customer service, and actually enjoy the process. Come in and find out more! Join us, and help make our communities, the environment, and the world a better place! Job Classification Title: Owners Authorized Representative 1 (OAR I) / Project Manager Duties 1. Construction and close-out phase of all assigned projects, 2. Reviews pre-construction documents and submits comments to Designer as necessary, 3. Plans, organizes, and prepares reports to upper management with respect to the status and/or progress of the projects, 4. Coordinates with all pertinent public agencies during pre-construction and construction to comply with all off-site work; coordinates with various District and Project staff, 5. Manages both the project budget and schedule to meet the Districts qualitative standards; monitors project budget on a monthly basis and ensures that the budget accurately reflects the project status/progress, 6. Manages the daily activities of the contractor, reviews contractors construction schedules and submittals, and coordinates responses to the contractors inquiries through the Requests for Clarifications (RFC) and other related documents, 7. Reviews substitution submittals from contractors to ensure specification and/or District requirements are complied with, 8. Receives, reviews, and negotiates Contractor Change Order Proposal(s) to achieve a fair & reasonable price in accordance with the General Conditions; reviews and addresses any and all Schedule impacts in accordance with the project specifications in a timely manner, 9. Reviews the process and monitors payments for the contractor, architects, engineers and any other pertinent parties, 10. Administers provisions of Professional Service Agreements between Architects and the District, 11. Coordinates District delivery of related fixtures, furniture and equipment, 12. Monitors and manages project close-out with respect to project certification with the Division of State Architects (DSA) and project financial close out, 13. Perform other related duties assigned Minimum Requirements Required Experience Ten (10) years full time paid professional experience in Construction and/or a combination of Project and Construction Management of Commercial and/or Public/Educational Facility Construction. Three (3) years of the ten (10) years should have full responsibility for coordinating complex projects with construction values of more than $10M. Additional Preferred Experience 1. Design Build Experience, 2. Experience utilizing Building Information Modeling (BIM), 3. Experience with Leadership in Energy and Environmental Design (LEED) certified projects and/or the Collaborative for High Performing Schools (CHPS), 4. Experience with Division of the State Architect (DSA) construction/design processes, 5. Safety and OSHA Safety Regulations (OSHA 30 minimum) Required Education 1. Graduation from a recognized college or university with a bachelors degree in architecture, engineering, or construction management OR, 2. Graduation from a recognized college or university with a bachelors degree. The candidate must be able to complete the Certified Construction Manager (CCM) credential within one (1) year of employment in the Facilities Services Division of the Los Angeles Unified School District. OR, 3. Possession of a valid Certified Construction Manager (CCM) credential may be substituted for the required education Preferred Licenses and Certificates A valid Certificate of Registration as an Architect by the California Architectural Board or Professional Engineer by the State Board for Professional Engineers and Land Surveyors A valid Construction Manager (CCM) credential by the Construction Manager Certification Institute (CMCI) Work Environment This role is primarily office-based with occasional field visits as required. The OAR1/ Project Manager may need to work extended hours to meet project deadlines. Why Join Us? SEC Construction Management offers a collaborative and supportive work environment where your contributions will directly impact the success of exciting and challenging projects. We value innovation, teamwork, and professional growth.

Job Description Water Engineering is currently seeking a reliable, self-motivated, and conscientious person to fill the position of Water Treatment Technical Service Representative. The role entails collection and analysis of water samples, adjusting chemical feed rates, onsite troubleshooting and maintenance of chemical inventory. Work Location: On the road with access to warehouse - Build your own schedule! Education: High school or equivalent Job Type: Full-time Pay: $22.00 - $27.00 per hour Expected hours: 40 per week Benefits: • Flexible schedule, • Paid Time Off, • Sick Time, • Holiday Pay, • 401(k), • Medical Insurance, • Dental Insurance, • Vision insurance, • Company vehicle or vehicle allowance, • Company gas card, • Company paid travel - flights, hotels, rental cars, • Company phone & laptop, • PPE, • Computer skills: 4 years (Required) Work Location: On the road The successful candidate will be responsible for: • Customer site service visits to review the stability of the water systems, operation of water treatment equipment and inventory of water treatment chemicals., • Completion of monthly service plans as per client contracts., • Performing analytical tests to determine the adequacy of chemical dosing and stability of the water system., • Completion of service reports and daily entry into database., • Delivery of chemical stock and management of inventory levels, • Demonstrating proficiency in performing all test and calibration routines required, as well as procedures for on-site services and web site account management. Training is provided., • Determining onsite support, equipment, parts and training for customer team support in the operation and preventative maintenance of all related equipment/instrumentation., • Troubleshooting hardware and software problems for customers on-site at customer locations. Resolving issues by repairing and/or calibrating instruments in accordance with designated O&M manuals., • Proactively reaching out and coordinating with the Account Management team to optimize applications or resolve service calls issues in a timely manner., • Keeping up to date with all Technical and Operational skills pertaining to this position, including all applicable safety procedures while meeting end customer requirements and expectations., • Demonstrating a safety mindset in actions and performance., • Demonstrating safe driving habits, • Technical degree/diploma in Electrical, Electronic Technology, Instrumentation or Engineering or other technical discipline is preferred but not required., • Minimum of 2 years of experience in water treatment, plant operations, maintenance, plumbing, electronics OR 2 years of relevant training (college, military, technical/vocational school), • Mechanical aptitude, • Basic computer skills, • Strong ability to troubleshoot and resolve issues, • Clear, concise, and professional communication with customer and Water Engineering personnel, verbally and in writing., • Ability to work in multiple environments, indoor/outdoor in variety of industries, • General knowledge of electrical equipment, basic plumbing and safety., • Ability to learn applicable company procedures within a reasonable time from start of employment., • Willing to travel daily within a 3 hr radius., • Self-motivated, ability to operate with minimal oversight., • Strong verbal and written communication skills., • Familiarity of digital communications including Netsuite, • Ability to communicate effectively and contribute to team projects in a sales environment via strong technical support., • Understanding of Water Treatment processes, controls and programming, and chemical applications We realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We are willing to train the right person on the specifics of water treatment. If you are a quick learner and enjoy problem-solving, water treatment offers a fluid opportunity for interesting work on a daily basis. We’re an organization that champions diversity and inclusion at every level and are proud to be an equal opportunity workplace! #hc177430

Job DescriptionDescription: Title: Chief Operating Officer Base Salary Range: $189,000-$200,000 plus benefits FTE: Full-Time - Exempt We are seeking a dynamic and experienced Chief Operating Officer who wants to make a difference in our community. We want to hear from you if you thrive in a fast-paced, caring, and compassionate environment! Our Mission: The Mission of South Central Family Health Center is to improve the quality of life for the diverse Community of inner city Los Angeles by providing affordable and comprehensive health care and education in a welcoming and multi-cultural environment. To lead the way in health care in South Los Angeles, as the premier provider and employer of choice offering comprehensive, high quality, affordable, efficient and culturally responsive services. General Summary: The Chief Operating Officer is under the direction of the CEO, the COO implements, manages and evaluates Clinic activities to ensure effective delivery of culturally and linguistically appropriate services. Oversees day-to-day operations of the clinics. COO is responsible for the overall operations of the health center(s) and in collaboration with the executive management team, fulfills the vision of the organization through the implementation of the strategic plan to ensure the mission, goals and objectives of the organization and those it serves are being met. The ideal candidate will have to perform some of the following essential duties. • Collaborate with CEO in setting and driving organizational vision, operations strategy, and hiring levels., • Translate strategy into actionable steps for growth, implementing organization-wide goal setting, performance management, and annual operations planning., • Analyze internal operations and identify areas for process enhancement., • Implement business strategies and plans that align with the short- and long-term objectives developed with CEO., • Oversee company operations and employee productivity, building a highly inclusive culture that ensures team members can thrive and that organizational goals are met., • Responsible for ensuring effective and efficient delivery of all clinic services and oversight of daily clinic operations and clinical staff at clinic sites., • Monitors site operations to ensure clinical productivity meets established standards and periodically reports on progress to CEO, CFO, and CMO., • Collaborates with CMO to manage provider schedules and appointment scheduling process., • Consults and coordinates with CMO on development and implementation of new clinical programs and major operational modifications., • In collaboration with the CFO, review the financial/billing/reimbursement aspects of operations including Medi-Cal Managed care Capitation and all County and State funding programs., • Participate in strategic planning and budgeting financial management., • Collaborates with CEO in acting as liaison with city, state and national community clinic associations and governmental agencies., • Responsible for establishing and overseeing risk management and clinic compliance programs (ie, CLIA, OSHA, BPHC, DHS, CMS, HIPAA, etc.), • Reviews and coordinates operational and clinical preparation for performance reviews, audits, and other private and governmental agency inquiries into clinic functions. Ensure timely response to audit findings., • Prepares and evaluates operational responses to environmental or man-made disasters and emergencies. This is to include the preparation of disaster preparation policies and procedures, as well as, necessary staff training and evaluation., • Maintains oversight over physical plant operations including supervision of physical plant staff and contracted agencies., • Works closely with other executives to develop and carry out major plans, coordinate operations of all divisions to complement companywide goals, and ensure that operations are being executed in accordance with policies and leads Board of Directors through the creation of organizational strategic plans., • Carries out negotiations with other companies regarding such proposed actions., • Provides representation and maintains close working relationships with the Community Clinic Association of Los Angeles County (CCALAC), the California Primary Care Association (CPCA), National Community Clinic Association (NACC), all public officials and other relevant community or civic agencies or activities., • Required: BA Degree in public administration, public health, business administration, health care administration, law or other related field., • Preferred: MA Degree in public administration, public health, business administration, health care administration, law or other related field-preferred., • Knowledge of community clinic administration., • Knowledge of local, state, and national health care issues and policies and potential impact on low income patients., • Required: Must have minimum 2 - 5 years managerial experience as COO of a medium to large nonprofit, community clinic, or public sector organization., • Required: Must have 5 to 7 years’ experience in healthcare delivery systems to uninsured and underinsured., • Knowledge of fiscal management and human resource management techniques., • Knowledge of governmental regulations and compliance requirements., • Demonstrated management and financial skills in dealing with all phases of business operations., • Knowledge of health care administration systems., • Excellent leadership skills with demonstrated ability to effectively lead in a changing environment., • Skill in developing comprehensive reports. Ability to analyze and interpret complex data., • Skill in developing and maintaining Center quality improvement., • Excellent and effective written and verbal communication skills, • Demonstrated management and financial skills in dealing with all phases of business operations, • Preferred: Bilingual skills, • Benefits: Health Care, Dental, Life Insurance, • 403 (b) Retirement Plan, • Education Reimbursement Career development: Entry-level employees have opportunities to work in management, HR or other areas of the company.Requirements: