Process operator jobs in Savannah, GeorgiaCreate job alerts

Job Description Overview As a Bandsaw Operator, you’ll get to setup our builders for success by setting up and operating power saws to slot, cut, and trim wood for pallet creation! You’ll be the a vital piece of our pallet manufacturing process, and we’re looking for a motivated individual to fill this role! Hourly Pay: $18.50/hr. - $25.00/hr. (production-based position) Shift(s): Monday - Friday 7:00am - 3:30pm Location: Savannah, GA, 31408 Responsibilities Operate power saws to cut & trim wood pallets Follow and adhere to all safety rules and regulations Communicate to plant management effectively on a regular basis Ability to work overtime as needed Qualifications High School Diploma or GED Ability to lift wooden pallets which weigh about 50 lbs. on a regular basis Previous lumber, warehouse, construction, carpentry, landscaping, roofing, experience highly preferred Quick hands, attention to detail, commitment to quality Ability to communicate effectively Ability to work overtime as needed

Job Description Job Requirements: -Valid Class A CDL -Valid TWIC Card -Minimum 2 years of verifiable tractor-trailer driving experience -Intermodal/container experience preferred -Must be at least 21 years old -No moving violations within the past 3 years -Truck must be ELD compliant -Truck must pass a DOT inspection Job Description: OWNER OPERATORS WANTED – ALL TERMINALS - Home Nightly, or Every Other Night Immediate Work Available | Savannah • Houston • CharlestonLCG Freight is actively hiring experienced Class A Owner Operators for our terminals in Savannah, GA | Houston, TX | Charleston, SC.If you have port/intermodal experience and a valid TWIC Card, we have consistent container freight available across our growing network. Why Drive with LCG Freight? Home Daily, or Out One Night Competitive Owner Operator payouts -Consistent port and container freight -Short-haul and regional opportunities -Flexible work opportunities -Contracted year-long business -Secure yards near the ports -Company-owned chassis available at select terminals -Detention pay -Extra stop pay -Layover pay -Performance and safety bonus opportunities -Tag and Insurance Programs available if needed Terminals Currently Hiring Savannah, GA Houston, TX Charleston, SC Requirements -Valid Class A CDL -Valid TWIC Card -Minimum 2 years of verifiable tractor-trailer driving experience -Intermodal/container experience preferred -Must be at least 21 years old -No moving violations within the past 3 years -Truck must be ELD compliant -Truck must pass a DOT inspection Ready to Get Started?Call or Text: (346) 560-5095Apply Online: www.lcgfreight.com/joinDrivers must complete the online Tenstreet application before our recruiting team can begin the hiring process. Our Fleet Onboarding Team will review your application and reach out to answer any questions and discuss the next steps. LCG Freight is growing — join our team and get to work!

Job Description Are you a highly skilled Quality Control professional ready to ensure operational excellence and product integrity in a global company? Join SUSONITY, a leader in the chemical industry, at our Savannah manufacturing site. We're a global brand that unites proven heritage with future ambition, and we're looking for an experienced and meticulous professional to help us embrace a bold future.As a Quality Control Operator, you'll be responsible for performing daily QC testing for raw materials, intermediates, and finished goods. The primary focus is performing tasks which support QC processes to confirm that all products released for sale comply with the applicable specifications/quality requirements. Also responsible for data entry into the SAP system to maintain data for traceability and safety training. Must maintain high standards for environmental compliance, safety, and housekeeping.Scope:Perform daily QC task for testing and release of raw materials.Supporting manufacturing process by providing timely results of in-process testing and conducting final release testing.Maintain all safety and environmental standards for the QC lab.Perform all duties assigned in compliance with regulatory requirements.Works cooperatively and effectively in a team environment to achieve common goals, results, and participate in continuous improvements initiatives within areas of responsibility.Review of analytical data produced.Maintain accurate and concise records.Works cooperatively and effectively in a team environment to achieve common goals, results, and participate in continuous improvements initiatives within areas of responsibility.Qualifications:Bachelor's degree in science related field.Minimum of 2 year of experience working in analytical chemistry, primarily in a lab setting.Strong following with laboratory procedures.Sap experience, preferred.Computer skills (Excel, Word, Email and Teams) and basic office skillsAbility to work with all levels of the organizational in professional manner.Attention to detail, ability to work in a busy environment with shifting priorities.Physical Requirements:Ability to stand, walk and sit for extended periods of time.Ability to lift 50 lbs.Ability to wear any Personal Protective Equipment as required.Ability to work safely in a chemical manufacturing environment.With SUSONITY, we are embracing a bold future - apply today!SUSONITY has partnered with Randstad, a world leader in connecting top talent with rewarding careers, to fill this crucial role

Job Description Job Title: Production Operator Location: Savannah, GA Work Model: Onsite Hours: M-F 6am to 2:30pm Compensation: $22.00/hr Type: 6-month contract, Potential for extension or conversion to permanent Responsibilities • Coating operations, assembly of product, and associated support, • Efficiently perform production operations according to Work Instructions (Standard Operating Procedures), • Perform in-process monitoring and recording of product quality, • Report up deviations in product from established standards, • Follow safe work and good housekeeping practices and report any unsafe conditions and incidents, • Make recommendations for continuous improvement, • Use basic hand and power tools, • Take on any other duties which are within the employee’s skills and abilities whenever reasonably instructed Requirements, • Ability to perform coating operations and assembly tasks, • Use of basic hand and power tools, • Adherence to safety and good housekeeping practices, • Effective monitoring and recording skills System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M- #LI- Ref: #558-Scientific

Job Description The Bucket Operator effectively and safely operates a bucket truck to remove branches and tree material from electrical lines. Valid driver's license is required. ESSENTIAL FUNCTIONS • Always follow and help enforce safe practices and rules., • Assist in preparing equipment and materials for each day’s work at Foreperson’s direction., • Operate equipment as directed by Foreperson., • Help maintain and repair equipment and tools used in operations., • Assist other crew members in all aspects of daily activities and take a leadership role when required., • Cleans up and disposes of all debris., • Sets up barriers, warning signs, flags, markers, etc. to protect employees and public., • Keeps informed on new equipment, specifications, standard practices, operating procedures, and customer and company employee relations policies and practices, • Track and report mileage to Foreperson, • Perform duties for storm work as needed, • Performs daily reporting using AMS system to submit timesheets and billing information., • Maintain above standard customer relations., • Accident Reporting. SUPERVISORY RESPONSIBILITIES Bucket Operator have no direct reports. EDUCATION REQUIREMENTS High School diploma or education equivalent preferred EXPERIENCE REQUIREMENTS • Two years’ experience in Vegetation Management., • Bucket truck operation experience required., • Knowledge of daily maintenance and safe operations of all equipment used., • Able to hear verbal instructions from a distance., • Must have a driver's license with a clean driving record., • Must have skid steer w/ mulcher operation experience., • Experience in safe operations and maintenance of vehicles and equipment., • Must have experience operating woodchipper., • Split dump driving experience preferred. This position requires employees to be able to pass a background check and drug screen as required for this job. Work authorization requirements: Must meet I-9 requirements. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice. Reasonable Accommodation Statement XKIG is an equal opportunity employer and complies with all federal, state, and local nondiscrimination laws, including the ADA. If you need reasonable accommodation during the application or hiring process, please contact our Talent Acquisition team at 877-418-2999. Benefits Offered: This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K. Paid Time Off (PTO) Eligibility and accrual timelines vary by position with some roles gaining PTO immediately and others becoming eligible after a set period of employment. Details are provided during the hiring process and may vary for Union hires. AI Usage Disclaimer: As part of our commitment to efficiency and innovation, we may use artificial intelligence (AI) tools during the recruiting and onboarding processes. These tools assist with tasks such as resume screening, interview scheduling, and communication. All decisions regarding hiring and employment are ultimately made by our human team. If you have questions or concerns about this process, please contact our H

Job DescriptionMES System Analyst II Location - Savannah, GA CBU: HMGMA Company Overview Hyundai AutoEver America (HAEA) is the dynamic IT powerhouse behind Hyundai Motor Corporation, a Fortune 500 global leader in the automotive industry. As a key affiliate, we provide cutting-edge IT services and support to top brands including Kia, Genesis, Hyundai Translead, Hyundai Mobis, Hyundai Capital, and Glovis. HAEA offers a truly global and collaborative environment. Here, you’ll drive innovation, boost operational efficiency, and help shape the future of mobility for the Hyundai Motor Group. At HAEA, we understand that IT is the cornerstone of today’s fast-evolving digital world. By uniting all IT resources under one roof, we deliver consistent, top-quality solutions while serving as the crucial information link between Hyundai’s Global Headquarters and North American operations. If you’re passionate about technology and eager to make a real impact at a world-class company, Hyundai AutoEver America is the place to grow your career. Join us and be part of the transformation that’s driving the future of automotive innovation. Website: http://www.haeaus.com Role Overview We seek a skilled and enthusiastic individual to join our dynamic IT team as a "MES System Analyst II.” The MES (Manufacturing Execution System) System Analyst III is pivotal in designing, developing, implementing, and maintaining MES solutions within a manufacturing environment. MES System Analyst III bridges the gap between information technology (IT) and manufacturing operations to ensure efficient and effective production processes. Your primary focus will involve implementing, maintaining, and optimizing a company's MES software and processes within a manufacturing environment. Analyzes, acquires, installs, modifies, and supports operating systems, databases, utilities, and Internet/intranet-related tools. Conducts systems programming and systems support activities, such as new or revised program language codes, processing routines, and report generators. Monitors effective language codes, processing routines, hardware use, and database management techniques. Modifies maintains, and updates software, such as compilers, link editors, assemblers, OEM utilities, JCL, macros, and subroutines. Develops and reviews operator and control instructions. Prepares and conducts system and programming tests requiring hardware and software interfacing. Conducts programming tasks, including program design, coding, debugging, and documentation. As directed, prepares feasibility studies and designs tests to determine operating characteristics of software. Key Responsibilities • Develop software for monitoring shops: Collaborate with stakeholders to design, develop, and deploy shop monitoring software applications that provide real-time insights into manufacturing processes, facilitating data-driven decision-making., • Develop software to work with current MES systems to add or enhance functionality: Identify opportunities to extend the capabilities of existing MES systems through software development, ensuring seamless integration and improved functionality., • Install hardware and software: Lead the installation and configuration of hardware and software components required for MES solutions, ensuring proper setup and compatibility., • Maintain and install equipment and configurations for the MES network: Continuously monitor and maintain the MES network infrastructure, including equipment and configurations, to ensure optimal performance and reliability., • Develop and maintain secondary software for environmental data gathering and Assembly repair reports: Create and maintain specialized software applications for collecting environmental data and generating assembly repair reports, contributing to comprehensive data analysis and reporting., • Perform purchasing duties for hardware, software, and services to complete tasks/projects: Engage in procurement activities to acquire necessary hardware, software licenses, and services required for MES-related projects, ensuring timely completion., • Maintain assigned systems within MES: Regularly update and manage the designated MES systems, applying patches, upgrades, and enhancements to ensure consistent performance., • Ensure systems are running smoothly: Monitor the operational status of MES systems, proactively addressing any performance or availability issues to minimize disruptions., • Troubleshoot root causes of system issues: Investigate and diagnose the underlying causes, applying technical expertise to resolve problems and prevent recurrence., • Install hardware and software for enhancements to existing systems: Lead the implementation of hardware and software upgrades or improvements to improve the functionality and efficiency of existing MES systems., • Run reports for customers for data in assigned systems: Extract and compile data from MES systems to generate customer reports, supporting data analysis and decision-making processes., • Create procedures and documentation for the MES: Develop comprehensive procedures and document the setup, configuration, and operation of MES systems, ensuring standardization and knowledge sharing., • Train MES Technicians and Users: Provide training sessions to MES technicians and end-users, equipping them with the necessary skills to utilize MES systems effectively., • Communicate with Clients to meet the organization's needs: Maintain effective communication, understand their requirements, and align MES solutions to meet their strategic objectives., • The System Analyst III is responsible for system accuracy and stability during production: Assume responsibility for ensuring the accuracy, stability, and reliability of MES systems, especially during critical production phases, to support seamless manufacturing operations., • Design and implement Kubernetes clusters that are scalable, highly available, and secure., • Develop and maintain automation scripts for provisioning, scaling, and managing Kubernetes environments.Basic Qualifications : Bachelor's Degree or equivalent experience Minimum 5+ years’ experience in the IT field. • Ability to work overtime., • Certifications Preferred: A+, Microsoft Certifications (MCPD, MCITP, MCTS), • Proficiency with Microsoft Office, • Excellent Analytical Skills and problem-solving skills, • Good documentation skills, • Software: Vue 3.X, Java 17.X, Springboot 2.7.X, .Net Framework 4.8, NginX, Tomcat, ASP.NET, C#, • Database/OS: Maria DB and Tibero, Oracle 11g, SQL server knowledge, Application Server (Windows and Linux), RHEL 9.X., RedHat, Debian, Amazon Linux, Rocky Linux, Ubuntu., • Intermediate/Advanced proficiency in performing coding utilizing C#, ASP.net, HTML5, and WinForms, • Basic knowledge of PLC (Programmable Logical Controller), • Intermediate/Advanced knowledge of business processes related to MES., • Primary SME (Subject Matter Expert) to the assigned shop, • Strong understanding of Kubernetes architecture, API, and ecosystem tools (e.g., Helm, Kustomize)., • Proficiency in automation and scripting languages (e.g., Bash, Python)., • K8S – Kubernetes reporting knowledge is a plus Preferred Qualifications : Any Certifications below are a plus. • Certified Manufacturing Technology Professional (CMfgT): Offered by the Society of Manufacturing Engineers (SME), this certification validates proficiency in manufacturing technologies and practices. It demonstrates an understanding of critical manufacturing systems, operations, and process optimization concepts, which are highly relevant to an MES System Analyst's role., • Certified in Production and Inventory Management (CPIM): Provided by APICS (The Association for Operations Management), this certification focuses on supply chain management, including production planning, inventory control, and materials management. It can be valuable for a MES System Analyst III to work on optimizing manufacturing processes within the automotive industry., • ISA-95 Certificate Program: This certification, offered by the International Society of Automation (ISA), focuses on the ISA-95 standard, which addresses integrating enterprise and control systems. It's particularly relevant for professionals implementing MES solutions and bridging the IT and manufacturing operations gap., • Rockwell Automation MES Certification: Rockwell Automation offers a certification program focused on MES software solutions. Achieving this certification demonstrates expertise in configuring, deploying, and maintaining Rockwell Automation's MES systems, which are only used in automotive manufacturing., • Siemens SIMATIC IT MES Certification: Siemens offers a certification program for its SIMATIC IT MES solution, which covers various aspects of MES implementation, customization, and maintenance. This certification is beneficial for MES System Analysts working with Siemens MES platforms., • Oracle Manufacturing Cloud Certification: Oracle offers certifications for its cloud-based manufacturing solutions, which include MES functionalities. These certifications validate skills in implementing and managing Oracle's MES systems in automotive manufacturing., • Certified Information Systems Auditor (CISA): Offered by ISACA, the CISA certification focuses on information systems audit, control, and assurance. While not specific to MES, it can be valuable for an MES System Analyst III involved in ensuring data integrity, security, and compliance within manufacturing systems., • Project Management Professional (PMP): Offered by the Project Management Institute (PMI), the PMP certification demonstrates proficiency in project management methodologies and practices. It can benefit an MES System Analyst III leading MES implementation projects in the automotive industry., • Certified MES Professional (CmMESP): Although not as widely recognized as other certifications, some organizations and training providers offer specialized certifications in MES. These certifications focus specifically on MES concepts, technologies, and best practices., • Certifications such as Certified Kubernetes Administrator (CKA) or Certified Kubernetes Application Developer (CKAD) are highly desirable.Team Culture: Our team thrives on collaboration, innovation, and continuous learning. We foster a supportive environment where every member is encouraged to share ideas and contribute to problem-solving. We value: • Passion for Technology: We are enthusiastic about emerging technologies and their potential to transform the automotive industry., • Agility: We work in an agile environment, adapting quickly to changes and continuously improving our processes., • Teamwork: We believe in the power of teamwork and collaboration, supporting each other to achieve common goals., • Growth: We prioritize personal and professional growth, offering opportunities for learning and development., • Inclusivity: We maintain an inclusive culture where diverse perspectives are valued and everyone feels welcome. Salary Range: $79,000 to $112,959/yr. Our Company adheres to the equal employment opportunity guidelines set forth by federal, state and local laws. The information requested on this form is sought in good faith and will not be used to discriminate against the applicant based on race, religion or creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic characteristics, marital status, sex or gender (which includes pregnancy, childbirth, or related circumstances), gender identity, gender expression, age, citizenship, sexual orientation, family care or medical leave status, military and veteran status, political affiliation, or any other characteristic protected by federal, state and local laws. Powered by JazzHR N6cqPpoMxH

Job DescriptionMES System Analyst III Location - Savannah, GA CBU: HMGMA Company Overview Hyundai AutoEver America (HAEA) is the dynamic IT powerhouse behind Hyundai Motor Corporation, a Fortune 500 global leader in the automotive industry. As a key affiliate, we provide cutting-edge IT services and support to top brands including Kia, Genesis, Hyundai Translead, Hyundai Mobis, Hyundai Capital, and Glovis. HAEA offers a truly global and collaborative environment. Here, you’ll drive innovation, boost operational efficiency, and help shape the future of mobility for the Hyundai Motor Group. At HAEA, we understand that IT is the cornerstone of today’s fast-evolving digital world. By uniting all IT resources under one roof, we deliver consistent, top-quality solutions while serving as the crucial information link between Hyundai’s Global Headquarters and North American operations. If you’re passionate about technology and eager to make a real impact at a world-class company, Hyundai AutoEver America is the place to grow your career. Join us and be part of the transformation that’s driving the future of automotive innovation. Website: http://www.haeaus.com Role Overview We seek a skilled and enthusiastic individual to join our dynamic IT team as a "MES System Analyst III.” The MES (Manufacturing Execution System) System Analyst III is pivotal in designing, developing, implementing, and maintaining MES solutions within a manufacturing environment. MES System Analyst III bridges the gap between information technology (IT) and manufacturing operations to ensure efficient and effective production processes. Your primary focus will involve implementing, maintaining, and optimizing a company's MES software and processes within a manufacturing environment. Analyzes, acquires, installs, modifies, and supports operating systems, databases, utilities, and Internet/intranet-related tools. Conducts systems programming and systems support activities, such as new or revised program language codes, processing routines, and report generators. Monitors effective language codes, processing routines, hardware use, and database management techniques. Modifies maintains, and updates software, such as compilers, link editors, assemblers, OEM utilities, JCL, macros, and subroutines. Develops and reviews operator and control instructions. Prepares and conducts system and programming tests requiring hardware and software interfacing. Conducts programming tasks, including program design, coding, debugging, and documentation. As directed, prepares feasibility studies and designs tests to determine operating characteristics of software. Key Responsibilities • Develop software for monitoring shops: Collaborate with stakeholders to design, develop, and deploy shop monitoring software applications that provide real-time insights into manufacturing processes, facilitating data-driven decision-making., • Develop software to work with current MES systems to add or enhance functionality: Identify opportunities to extend the capabilities of existing MES systems through software development, ensuring seamless integration and improved functionality., • Install hardware and software: Lead the installation and configuration of hardware and software components required for MES solutions, ensuring proper setup and compatibility., • Maintain and install equipment and configurations for the MES network: Continuously monitor and maintain the MES network infrastructure, including equipment and configurations, to ensure optimal performance and reliability., • Develop and maintain secondary software for environmental data gathering and Assembly repair reports: Create and maintain specialized software applications for collecting environmental data and generating assembly repair reports, contributing to comprehensive data analysis and reporting., • Perform purchasing duties for hardware, software, and services to complete tasks/projects: Engage in procurement activities to acquire necessary hardware, software licenses, and services required for MES-related projects, ensuring timely completion., • Maintain assigned systems within MES: Regularly update and manage the designated MES systems, applying patches, upgrades, and enhancements to ensure consistent performance., • Ensure systems are running smoothly: Monitor the operational status of MES systems, proactively addressing any performance or availability issues to minimize disruptions., • Troubleshoot root causes of system issues: Investigate and diagnose the underlying causes, applying technical expertise to resolve problems and prevent recurrence., • Install hardware and software for enhancements to existing systems: Lead the implementation of hardware and software upgrades or improvements to improve the functionality and efficiency of existing MES systems., • Run reports for customers for data in assigned systems: Extract and compile data from MES systems to generate customer reports, supporting data analysis and decision-making processes., • Create procedures and documentation for the MES: Develop comprehensive procedures and document the setup, configuration, and operation of MES systems, ensuring standardization and knowledge sharing., • Train MES Technicians and Users: Provide training sessions to MES technicians and end-users, equipping them with the necessary skills to utilize MES systems effectively., • Communicate with Clients to meet the organization's needs: Maintain effective communication, understand their requirements, and align MES solutions to meet their strategic objectives., • The System Analyst III is responsible for system accuracy and stability during production: Assume responsibility for ensuring the accuracy, stability, and reliability of MES systems, especially during critical production phases, to support seamless manufacturing operations., • Design and implement Kubernetes clusters that are scalable, highly available, and secure., • Develop and maintain automation scripts for provisioning, scaling, and managing Kubernetes environments.Basic Qualifications : Bachelor's Degree or equivalent experience Minimum 5+ years’ experience in the IT field. • Ability to work overtime., • Certifications Preferred: A+, Microsoft Certifications (MCPD, MCITP, MCTS), • Proficiency with Microsoft Office, • Excellent Analytical Skills and problem-solving skills, • Good documentation skills, • Software: Vue 3.X, Java 17.X, Springboot 2.7.X, .Net Framework 4.8, NginX, Tomcat, ASP.NET, C#, • Database/OS: Maria DB and Tibero, Oracle 11g, SQL server knowledge, Application Server (Windows and Linux), RHEL 9.X., RedHat, Debian, Amazon Linux, Rocky Linux, Ubuntu., • Intermediate/Advanced proficiency in performing coding utilizing C#, ASP.net, HTML5, and WinForms, • Basic knowledge of PLC (Programmable Logical Controller), • Intermediate/Advanced knowledge of business processes related to MES., • Primary SME (Subject Matter Expert) to the assigned shop, • Strong understanding of Kubernetes architecture, API, and ecosystem tools (e.g., Helm, Kustomize)., • Proficiency in automation and scripting languages (e.g., Bash, Python)., • K8S – Kubernetes reporting knowledge is a plus Preferred Qualifications : Any Certifications below are a plus. • Certified Manufacturing Technology Professional (CMfgT): Offered by the Society of Manufacturing Engineers (SME), this certification validates proficiency in manufacturing technologies and practices. It demonstrates an understanding of critical manufacturing systems, operations, and process optimization concepts, which are highly relevant to an MES System Analyst's role., • Certified in Production and Inventory Management (CPIM): Provided by APICS (The Association for Operations Management), this certification focuses on supply chain management, including production planning, inventory control, and materials management. It can be valuable for a MES System Analyst III to work on optimizing manufacturing processes within the automotive industry., • ISA-95 Certificate Program: This certification, offered by the International Society of Automation (ISA), focuses on the ISA-95 standard, which addresses integrating enterprise and control systems. It's particularly relevant for professionals implementing MES solutions and bridging the IT and manufacturing operations gap., • Rockwell Automation MES Certification: Rockwell Automation offers a certification program focused on MES software solutions. Achieving this certification demonstrates expertise in configuring, deploying, and maintaining Rockwell Automation's MES systems, which are only used in automotive manufacturing., • Siemens SIMATIC IT MES Certification: Siemens offers a certification program for its SIMATIC IT MES solution, which covers various aspects of MES implementation, customization, and maintenance. This certification is beneficial for MES System Analysts working with Siemens MES platforms., • Oracle Manufacturing Cloud Certification: Oracle offers certifications for its cloud-based manufacturing solutions, which include MES functionalities. These certifications validate skills in implementing and managing Oracle's MES systems in automotive manufacturing., • Certified Information Systems Auditor (CISA): Offered by ISACA, the CISA certification focuses on information systems audit, control, and assurance. While not specific to MES, it can be valuable for an MES System Analyst III involved in ensuring data integrity, security, and compliance within manufacturing systems., • Project Management Professional (PMP): Offered by the Project Management Institute (PMI), the PMP certification demonstrates proficiency in project management methodologies and practices. It can benefit an MES System Analyst III leading MES implementation projects in the automotive industry., • Certified MES Professional (CmMESP): Although not as widely recognized as other certifications, some organizations and training providers offer specialized certifications in MES. These certifications focus specifically on MES concepts, technologies, and best practices., • Certifications such as Certified Kubernetes Administrator (CKA) or Certified Kubernetes Application Developer (CKAD) are highly desirable.Team Culture: Our team thrives on collaboration, innovation, and continuous learning. We foster a supportive environment where every member is encouraged to share ideas and contribute to problem-solving. We value: • Passion for Technology: We are enthusiastic about emerging technologies and their potential to transform the automotive industry., • Agility: We work in an agile environment, adapting quickly to changes and continuously improving our processes., • Teamwork: We believe in the power of teamwork and collaboration, supporting each other to achieve common goals., • Growth: We prioritize personal and professional growth, offering opportunities for learning and development., • Inclusivity: We maintain an inclusive culture where diverse perspectives are valued and everyone feels welcome. Salary Range: $80,000 to $120,000/yr. Our Company adheres to the equal employment opportunity guidelines set forth by federal, state and local laws. The information requested on this form is sought in good faith and will not be used to discriminate against the applicant based on race, religion or creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic characteristics, marital status, sex or gender (which includes pregnancy, childbirth, or related circumstances), gender identity, gender expression, age, citizenship, sexual orientation, family care or medical leave status, military and veteran status, political affiliation, or any other characteristic protected by federal, state and local laws. Powered by JazzHR 5OrrPSbQJA

Job DescriptionMES System Analyst III Location - Savannah, GA CBU: HMGMA Company Overview Hyundai AutoEver America (HAEA) is the dynamic IT powerhouse behind Hyundai Motor Corporation, a Fortune 500 global leader in the automotive industry. As a key affiliate, we provide cutting-edge IT services and support to top brands including Kia, Genesis, Hyundai Translead, Hyundai Mobis, Hyundai Capital, and Glovis. HAEA offers a truly global and collaborative environment. Here, you’ll drive innovation, boost operational efficiency, and help shape the future of mobility for the Hyundai Motor Group. At HAEA, we understand that IT is the cornerstone of today’s fast-evolving digital world. By uniting all IT resources under one roof, we deliver consistent, top-quality solutions while serving as the crucial information link between Hyundai’s Global Headquarters and North American operations. If you’re passionate about technology and eager to make a real impact at a world-class company, Hyundai AutoEver America is the place to grow your career. Join us and be part of the transformation that’s driving the future of automotive innovation. Website: http://www.haeaus.com Role Overview We seek a skilled and enthusiastic individual to join our dynamic IT team as a "MES System Analyst III.” The MES (Manufacturing Execution System) System Analyst III is pivotal in designing, developing, implementing, and maintaining MES solutions within a manufacturing environment. MES System Analyst III bridges the gap between information technology (IT) and manufacturing operations to ensure efficient and effective production processes. Your primary focus will involve implementing, maintaining, and optimizing a company's MES software and processes within a manufacturing environment. Analyzes, acquires, installs, modifies, and supports operating systems, databases, utilities, and Internet/intranet-related tools. Conducts systems programming and systems support activities, such as new or revised program language codes, processing routines, and report generators. Monitors effective language codes, processing routines, hardware use, and database management techniques. Modifies maintains, and updates software, such as compilers, link editors, assemblers, OEM utilities, JCL, macros, and subroutines. Develops and reviews operator and control instructions. Prepares and conducts system and programming tests requiring hardware and software interfacing. Conducts programming tasks, including program design, coding, debugging, and documentation. As directed, prepares feasibility studies and designs tests to determine operating characteristics of software. Key Responsibilities • Develop software for monitoring shops: Collaborate with stakeholders to design, develop, and deploy shop monitoring software applications that provide real-time insights into manufacturing processes, facilitating data-driven decision-making., • Develop software to work with current MES systems to add or enhance functionality: Identify opportunities to extend the capabilities of existing MES systems through software development, ensuring seamless integration and improved functionality., • Install hardware and software: Lead the installation and configuration of hardware and software components required for MES solutions, ensuring proper setup and compatibility., • Maintain and install equipment and configurations for the MES network: Continuously monitor and maintain the MES network infrastructure, including equipment and configurations, to ensure optimal performance and reliability., • Develop and maintain secondary software for environmental data gathering and Assembly repair reports: Create and maintain specialized software applications for collecting environmental data and generating assembly repair reports, contributing to comprehensive data analysis and reporting., • Perform purchasing duties for hardware, software, and services to complete tasks/projects: Engage in procurement activities to acquire necessary hardware, software licenses, and services required for MES-related projects, ensuring timely completion., • Maintain assigned systems within MES: Regularly update and manage the designated MES systems, applying patches, upgrades, and enhancements to ensure consistent performance., • Ensure systems are running smoothly: Monitor the operational status of MES systems, proactively addressing any performance or availability issues to minimize disruptions., • Troubleshoot root causes of system issues: Investigate and diagnose the underlying causes, applying technical expertise to resolve problems and prevent recurrence., • Install hardware and software for enhancements to existing systems: Lead the implementation of hardware and software upgrades or improvements to improve the functionality and efficiency of existing MES systems., • Run reports for customers for data in assigned systems: Extract and compile data from MES systems to generate customer reports, supporting data analysis and decision-making processes., • Create procedures and documentation for the MES: Develop comprehensive procedures and document the setup, configuration, and operation of MES systems, ensuring standardization and knowledge sharing., • Train MES Technicians and Users: Provide training sessions to MES technicians and end-users, equipping them with the necessary skills to utilize MES systems effectively., • Communicate with Clients to meet the organization's needs: Maintain effective communication, understand their requirements, and align MES solutions to meet their strategic objectives., • The System Analyst III is responsible for system accuracy and stability during production: Assume responsibility for ensuring the accuracy, stability, and reliability of MES systems, especially during critical production phases, to support seamless manufacturing operations., • Design and implement Kubernetes clusters that are scalable, highly available, and secure., • Develop and maintain automation scripts for provisioning, scaling, and managing Kubernetes environments.Basic Qualifications : Bachelor's Degree or equivalent experience Minimum 5+ years’ experience in the IT field. • Ability to work overtime., • Certifications Preferred: A+, Microsoft Certifications (MCPD, MCITP, MCTS), • Proficiency with Microsoft Office, • Excellent Analytical Skills and problem-solving skills, • Good documentation skills, • Software: Vue 3.X, Java 17.X, Springboot 2.7.X, .Net Framework 4.8, NginX, Tomcat, ASP.NET, C#, • Database/OS: Maria DB and Tibero, Oracle 11g, SQL server knowledge, Application Server (Windows and Linux), RHEL 9.X., RedHat, Debian, Amazon Linux, Rocky Linux, Ubuntu., • Intermediate/Advanced proficiency in performing coding utilizing C#, ASP.net, HTML5, and WinForms, • Basic knowledge of PLC (Programmable Logical Controller), • Intermediate/Advanced knowledge of business processes related to MES., • Primary SME (Subject Matter Expert) to the assigned shop, • Strong understanding of Kubernetes architecture, API, and ecosystem tools (e.g., Helm, Kustomize)., • Proficiency in automation and scripting languages (e.g., Bash, Python)., • K8S – Kubernetes reporting knowledge is a plus Preferred Qualifications : Any Certifications below are a plus. • Certified Manufacturing Technology Professional (CMfgT): Offered by the Society of Manufacturing Engineers (SME), this certification validates proficiency in manufacturing technologies and practices. It demonstrates an understanding of critical manufacturing systems, operations, and process optimization concepts, which are highly relevant to an MES System Analyst's role., • Certified in Production and Inventory Management (CPIM): Provided by APICS (The Association for Operations Management), this certification focuses on supply chain management, including production planning, inventory control, and materials management. It can be valuable for a MES System Analyst III to work on optimizing manufacturing processes within the automotive industry., • ISA-95 Certificate Program: This certification, offered by the International Society of Automation (ISA), focuses on the ISA-95 standard, which addresses integrating enterprise and control systems. It's particularly relevant for professionals implementing MES solutions and bridging the IT and manufacturing operations gap., • Rockwell Automation MES Certification: Rockwell Automation offers a certification program focused on MES software solutions. Achieving this certification demonstrates expertise in configuring, deploying, and maintaining Rockwell Automation's MES systems, which are only used in automotive manufacturing., • Siemens SIMATIC IT MES Certification: Siemens offers a certification program for its SIMATIC IT MES solution, which covers various aspects of MES implementation, customization, and maintenance. This certification is beneficial for MES System Analysts working with Siemens MES platforms., • Oracle Manufacturing Cloud Certification: Oracle offers certifications for its cloud-based manufacturing solutions, which include MES functionalities. These certifications validate skills in implementing and managing Oracle's MES systems in automotive manufacturing., • Certified Information Systems Auditor (CISA): Offered by ISACA, the CISA certification focuses on information systems audit, control, and assurance. While not specific to MES, it can be valuable for an MES System Analyst III involved in ensuring data integrity, security, and compliance within manufacturing systems., • Project Management Professional (PMP): Offered by the Project Management Institute (PMI), the PMP certification demonstrates proficiency in project management methodologies and practices. It can benefit an MES System Analyst III leading MES implementation projects in the automotive industry., • Certified MES Professional (CmMESP): Although not as widely recognized as other certifications, some organizations and training providers offer specialized certifications in MES. These certifications focus specifically on MES concepts, technologies, and best practices., • Certifications such as Certified Kubernetes Administrator (CKA) or Certified Kubernetes Application Developer (CKAD) are highly desirable.Team Culture: Our team thrives on collaboration, innovation, and continuous learning. We foster a supportive environment where every member is encouraged to share ideas and contribute to problem-solving. We value: • Passion for Technology: We are enthusiastic about emerging technologies and their potential to transform the automotive industry., • Agility: We work in an agile environment, adapting quickly to changes and continuously improving our processes., • Teamwork: We believe in the power of teamwork and collaboration, supporting each other to achieve common goals., • Growth: We prioritize personal and professional growth, offering opportunities for learning and development., • Inclusivity: We maintain an inclusive culture where diverse perspectives are valued and everyone feels welcome. Salary Range: $79,000 to $112,959/yr. Our Company adheres to the equal employment opportunity guidelines set forth by federal, state and local laws. The information requested on this form is sought in good faith and will not be used to discriminate against the applicant based on race, religion or creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic characteristics, marital status, sex or gender (which includes pregnancy, childbirth, or related circumstances), gender identity, gender expression, age, citizenship, sexual orientation, family care or medical leave status, military and veteran status, political affiliation, or any other characteristic protected by federal, state and local laws. Powered by JazzHR EHeWN9MWae

Job Description Ongoing Opportunities – Driver Recruiting We are continuously looking to connect with strong driver recruiting experience across our markets. While an immediate opening may not be available in every location, driver recruiting is a critical function in our operation, and we regularly add talent as we grow. This role is best suited for individuals who thrive in fast-moving environments and take ownership of outcomes. If you are someone who manages complexity, stays action oriented, and drives results, we would welcome the opportunity to connect. Only candidates living in the GWI Market areas will be considered Job Title: Driver Recruiter Department: Driver Development Location: Remote Position Type: Full-time Company Overview Gulf Winds International, Inc. is a leading provider of drayage, transloading, and storage, serving importers and exporters globally. The Company prides itself on innovation, people, and purpose, redefining expectations for intermodal trucking. With a robust presence at major ports, including Houston, Dallas, Mobile, Memphis, Savannah, Charleston, Norfolk, Baltimore, and Chicago, Gulf Winds is dedicated to delivering top-notch services through continuous investment in technology and infrastructure. Ownership: The company is backed by The Sterling Group, a Houston-based private equity firm. Since 1982, The Sterling Group has partnered with management teams to grow and build winning businesses in the industrial sector. Over 75% of Sterling’s past partnerships have been with family businesses and corporate carve-outs. Sterling excels as a partner bringing its operational focus and expertise to support company objectives. Today, Sterling has over $5.7 billion in assets under management. Position Summary The Driver Recruiter is responsible for attracting and qualifying professional truck drivers, with a focus on owner-operators and drivers with intermodal container experience. This role develops and executes market-specific recruiting strategies, manages the applicant pipeline, and ensures a seamless hiring experience from initial contact through onboarding. The Driver Recruiter partners closely with Operations and the Marketing/Drive team to align capacity needs, market competitiveness, and retention goals, while promoting company culture and delivering exceptional candidate experiences. Primary Responsibilities • Develop and execute recruiting strategies by market to maintain a robust pipeline of qualified drivers., • Manage full-cycle recruiting: source, screen, interview, run reports, request documentation, and schedule drug screens., • Leverage Tenstreet and other platforms to track, process, and qualify candidates., • Utilize social media, advertising, and recruiting events to expand driver leads and applications., • Maintain strong market knowledge, including competitor pay structures, trends, and recruiting strategies., • Partner with Terminal Managers and Operations to ensure hiring aligns with pay structures, capacity needs, and retention goals., • Monitor onboarding trends by market and proactively identify opportunities for process improvements., • Ensure compliance with all FMCSA and DOT regulations during the qualification and hiring process., • Deliver a positive candidate experience by providing timely communication, transparency, and professionalism., • Promote company culture, support retention initiatives, and serve as a recruiting resource to operations staff. Qualifications • High School Diploma or GED required; college coursework preferred., • 2+ years of truck driver recruiting experience required (owner-operator recruiting experience strongly preferred)., • 6+ months Tenstreet experience required., • Prior experience in intermodal/drayage or transportation industry preferred., • Strong knowledge of FMCSA, DOT, and driver qualification requirements. Skills & Abilities • Excellent written and verbal communication skills., • Strong organizational skills, attention to detail, and ability to multi-task in a fast-paced environment., • Proficient in Microsoft Office and recruiting platforms (e.g., Tenstreet)., • Independent thinker with problem-solving ability and a high level of follow-through., • Ability to build strong relationships with candidates, operations staff, and leadership., • Professional, motivated, and team-oriented approach.

Job DescriptionDescription: Are you tired of feeling like just a number at work? At MainOcean, we believe work should be more than just a job ~ it should feel like a second home. We pride ourselves on offering a family-style environment where every team member is a valued contributor and shares a commitment to excellence. With over 100 years of combined expertise across three generations, our business stands as a cornerstone in logistics and transport throughout the Southeast and Gulf Coast. We excel in providing innovative supply chain solutions through our integrated network of warehouses, ports, and transportation services. Come join our passionate team and experience a dynamic, collaborative environment where your growth and success are at the heart of what we do. About Us: We are proud to be a family-run, regionally focused company led by three generations with more than 100 years of combined logistics, transport and stevedore experience in the Southeast and Gulf Coast. MainOcean Carolinas LLC is a consolidated family of companies providing logistics and supply chain solutions to cargo owners and shippers through the warehouse, port, and transportation industries. Job Purpose: Serve in a key role by performing a wide range of warehouse functions, including the safe and efficient operation of forklifts, inventory management, order picking, material handling, and shipping and receiving activities. This role supports smooth warehouse operations and ensures the timely loading and unloading of customer products. The position will also include responsibilities as a Yard Truck Operator when business needs require. The Yard Truck Operator safely and accurately moves trailers to and from dock doors per instructions from the Supervisor and office staff. This role is responsible for maintaining the organization, cleanliness, and safety of yard and dock areas, as well as ensuring all seals and paperwork are properly handled and processed in accordance with MainOcean Logistics procedures. Duties & Responsibilities: • Operate various types of forklifts, including reach trucks, clamp trucks, standard forklifts., • Safely load and unload materials from trucks and storage areas according to customer’s requirements., • Transport materials throughout the warehouse using forklifts and other heavy equipment., • Assist with shipping and receiving tasks, including checking inventory and verifying orders., • Collaborate with Warehouse Supervisors to ensure efficient warehouse operations., • Organize customer products by type, lot number, or other required classifications., • Perform routine maintenance checks on forklifts and report any issues or malfunctions., • Operate yard lifts and yard trucks in a safe and efficient manner., • Conduct accurate and timely yard checks at designated times., • Set dock for the following day at the end of each shift in accordance with required prioritization., • Prioritize BTC drivers by communicating prior to arrival, facilitating doubles when possible, and verifying empty containers are clean with doors properly secured., • Proactively notify management of all work not expected to be completed within assigned time expectation so corrective action can be taken., • Accurately complete and submit all required documentation for each load and end-of-day reporting, including but not limited to container activity logs, receiving documents, and photos for export crate deliveries., • Maintain an organized, clean, and safe work area free of OSHA violations, including but not limited to assigned truck and apron area., • Efficiently coordinate traffic in the yard when necessary., • Proactively notify management when company property or equipment needs repair or the condition is deteriorating abnormally., • Develop and build professional relationships with customers., • Adhere to safety protocols and maintain a clean and organized work area., • Support continuous improvement by contributing to the ongoing efforts to improve all experiences with MainOcean., • Additional duties as assigned., • Duties and responsibilities may change, and new ones may be added, at any time with or without advanced notice.Requirements: Skills and Qualifications: • High school diploma or equivalent required., • Forklift operator certified with proficient skill in the safe operation of forklift, yard lifts, and yard trucks., • Current valid driver’s license and clean driving record., • 1+ year of experience warehouse related experience with a successful track record of safety and accuracy., • Able to read, write, and communicate in verbal and written English fluently., • Able to work with initiative and minimal supervision and is goal oriented., • Computer and tablet literate along with working knowledge of camera use in order to take pictures of cargo., • Strong business math skills., • Able to read, interpret, and apply information from office documents., • Able to effectively communicate regarding completed work and accurately ascertain estimated time to completion of outstanding work., • Able to build strong relationships with intra-company employees and drivers., • Able to multi-task and manage multiple priorities., • Excellent attention to detail., • Excellent organizational, task and time management skills. Working Conditions: • The worker is subject to outside environmental conditions: No effective protection from weather., • The worker is subject to extreme heat: Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions such as wind and humidity., • The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level., • The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals., • The worker is subject to atmospheric conditions: One or more of the following conditions that affect the respiratory system of the skin: Fumes, odors, dusts, mists, gases or poor ventilation., • The worker is required to function in narrow aisles, passageways, or small spaces: Includes spaces such as loaded cargo containers and warehouse aisles., • The worker is subject to heights: The worker frequently is required to utilize ladders and lifts to reach high objects in a warehouse environment that may be stored tens of feet off of the ground. Physical Requirements: • Medium work: Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects., • Climbing: Ascending or descending ladders, stairs, scaffolding, ramps, poles and the like, using feet and legs and/or hands and arms. Body agility is emphasized. This factor is important if the amount and kind of climbing required exceeds that required for ordinary locomotion., • Stooping: Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full use of the lower extremities and back muscles., • Crouching: Bending the body downward and forward by bending leg and spine., • Reaching: Extending hand(s) and arm(s) in any direction., • Standing: Remaining upright on the feet, particularly for sustained periods of time., • Sitting: Be in a seated position for an extended period of time., • Walking: Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another., • Pushing: Using upper extremities to press against something with steady force in order to thrust forward, downward or outward., • Pulling: Using upper extremities to exert force in order to draw, drag, haul or tug objects in a sustained motion., • Lifting: Raising objects from a lower to a higher position or moving objects horizontally from position to-position. This factor is important if it occurs to a considerable degree and requires the substantial use of the upper extremities and back muscles., • Fingering: Picking, pinching, typing or otherwise working, primarily with fingers rather than with whole hand or arm as in handling., • Grasping: Applying pressure to an object with the fingers and palm., • Feeling: Perceiving attributes of objects, such as size, shape, temperature or texture by touching with skin, particularly that of fingertips., • Talking: Expressing or exchanging ideas by means of the spoken word; those activities where detailed or important spoken instructions must be conveyed to other workers accurately, loudly, or quickly, • Hearing: Perceiving the nature of sounds at normal speaking levels with or without correction and having the ability to receive detailed information through oral communication and making fine discriminations in sound., • Seeing: Clarity of vision at near and far distances, depth perception, and able to work in low light environments., • Smelling: Able to detect or perceive odors. Direct Reports: • None. Acknowledgements MainOcean Carolinas LLC provides equal employment opportunities to all applicants and employees and strictly prohibits any type of harassment or discrimination in regard to race, religion, age, color, sex, disability status, national origin, genetics, sexual orientation, protected veteran status, gender expression, gender identity, or any other characteristic protected under federal, state, and/or local laws. Consistent with the Americans with Disabilities Act (ADA), it is the policy of MainOcean Carolinas LLC to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact Human Resources - hr@mainocean.com. All employment with MainOcean Carolinas LLC is on an at-will basis.

Job DescriptionDescription: JOB OVERVIEW: We are seeking a dependable and safety-conscious Siloadmax / Top Lift Operator to join our team at our Stack Yard. This dual-role position is responsible for operating specialized equipment to load bulk products into containers and handling container movement within the yard. KEY RESPONSIBILITIES: Siloadmax Duties: • Install bladders into 20-ft containers for bulk loading., • Operate the Siloadmax system, including attaching the bladder spout and starting product flow., • Monitor gauges and instruments to regulate the loading process., • Seal containers once filling is complete., • Maintain associated equipment such as air compressors and generators. Top Lift Duties: • Operate a Taylor Top Lift to move containers on and off chassis., • Maintain yard organization by strategically placing and stacking containers., • Perform regular cleaning and upkeep of the yard area., • Conduct routine checks and maintenance on top lift equipment. Requirements: MINIMUM WORK EXPERIENCE: • Experience in driving heavy equipment is a must., • Previous forklift experience PREFERRED EDUCATION • High School Diploma SPECIFIC KNOWLEDGE & SKILLS: • Strong attention to detail and ability to follow procedures, • Comfortable working indoors and outdoors in various weather conditions, • Ability to lift up to 50 lbs and work on your feet for extended periods, • Basic computer or scanner skills for inventory management WORK ENVIRONMENT: Work is generally performed in a warehouse environment. The noise level is moderate. Generally, well ventilated, and well lit. Warehouse team members may be required to wear protective clothing. Additionally, may operate heavy equipment and strict safety regulations may be required. PHYSICAL EFFORT: Work is physically strenuous, and team members are required to lift heavy packages up to 50 pounds. Work may require excessive bending or stooping. Team members may be required to climb ladders, use hand tools, and/or use heavy machinery (e.g., forklift, etc.). The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Light duty options may be available. Port City Logistics is an Equal Employment Opportunity Employer and does not discriminate against applicants or employees on the basis of race, color, religion, creed, national origin, ancestry, disability that can be reasonably accommodated without undue hardship, sex, sexual orientation, gender identity, age, citizenship, marital or veteran status, or any other legally protected status.

Job Description *Looking for Traveling Heavy Equipment Operators with paid Per Diem, working throughout Georgia, South Carolina, North Carolina, Tennessee and the Florida Panhandle* We are looking for experienced Heavy Equipment Operators that are willing to travel throughout the Southeastern United States, with specific experience in track hoes and dozers. Candidates must show a strong interest in learning. A dedicated career development plan will be provided to help you advance your career. Equipment Operator • Mainline Hoe Operator: ability to dig trenches for sewer and set trench boxes, • GPS Dozer Operator a plus: requires extensive GPS Trimble knowledge and ability to fine grade Requirements: • Must have valid driver's license, • Must be a U.S. Citizen, • Must participate in pre-employment and random drug screening program., • Subject to a background screening process C. A. Murren is a full-service, well established industrial, civil, and power industry contractor performing work throughout the Southeastern and Mid-Atlantic United States with offices located in Georgia, Florida, South Carolina and Virginia. For more than 40 years, we have offered the highest levels of industrial site development performance and we are proud of our long legacy of serving the Southeast. Our philosophy is to focus on both the human element and the high quality, sustainable construction that makes us who we are. We are completely dedicated to serving our clients and the team members who make C. A. Murren a team and family-oriented experience like few others. We pride ourselves in over 40 years of safety and quality work in the heavy civil construction industry. We have an excellent benefits package which includes, medical, dental, vision, and 401K match! We also have a career development plan which offers continued growth for your career goals! We are seeking Heavy Equipment Operators with 2+ years of experience with heavy civil construction experience. These positions are based throughout the Southeastern United States. If you are passionate about construction and have 2+ years’ experience as a Heavy Equipment Operator for heavy civil sites, please apply below. Also, please check out our company. https://camurren.com/about-us/

Job Description Are you a Chemical Operator ready to manage specialized refining and production processes at a global chemical plant? Join SUSONITY, a leader in the chemical industry, at our Savannah manufacturing site. We're a global brand that unites proven heritage with future ambition, and we're looking for a highly motivated and experienced professional to help us embrace a bold future.Position Scope:The Operator is responsible for performing the daily production duties within their production area along with the other operators on the production team. The main activities include the manufacturing of products to ensure quality and favorable yield by following the standard operating procedures, while maintaining high standards for housekeeping, safety and environmental compliance. The operator will contribute to the site's continuous improvements utilizing the CIP database for BPS and continuous improvement ideas and may participate on 5S and L&SS projects. The operator is responsible for contributing to the site and departments key performance indicators (KPIs).Schedule & Availability: This position follows a swing shift of 5 x 12 hour shifts, per week with 2 days off in between. Must be able to work long hours on a rotating shift schedule on a regular basis and in extreme climates (high/low temperatures and humidity). Key Responsibilities:Operator areas include but not limited to: Mica Preparation, Finishing, Blending & Packaging, Repack, Non-Dust, Bismuth, and WM production.Process chemicals by following standard operating procedures on equipment such as reactors, filters, kilns, centrifuge, pumps, etc.Assure safe and environmentally compliant operation of the production processes.Package and transfer chemicals safely.Monitor and maintain equipment, including adjusting controls, cleaning, and startup/shutdown.Conduct laboratory tests and record results like PH, temperature, particle analysis, etc.Possess technical knowledge in the area of responsibilities.Participate in continuous improvements initiatives within areas of responsibility.Provide on-the-job training to other operator I and II as requested.Ability to climb stairs, ladders and walk long distances during the course of the workday.Able to move and handle heavy objects with appropriate equipment.Qualifications:A High School / GED degree.At least three years of Chemical Operations experience in a Manufacturing environment.Be proficient in the use of normal computer hardware/software.A solid understanding and application of basic math skills.Exposure to Lean Six Sigma and ISO certification.Physical Requirements:Ability to stand for extended periods.Ability to lift objects up to 50 lbs.Ability to climb ladder/stairs.Ability to bend, stoop and kneel.Ability to work in various environmental conditions (hot, cold, dusty).Ability to work in enclosed/tight spaces.Must be able to work long hours (12-14) on a rotating shift schedule on a regular basis.Must be able to work in extreme climates (high / low temperatures and humidity).Able to move and handle heavy objects with appropriate equipment.

Job Description Who We Are: Porter Logistics is a fast-growing third-party logistics (3PL) provider redefining modern warehousing and fulfillment. Headquartered in Atlanta, we’ve scaled over the past decade from a two-person operation in 10,000 square feet to more than 1 million square feet across multiple Georgia facilities, supporting high-volume, high-expectation customers across a range of industries. We’re excited to be expanding into Savannah, marking our first facility in the market. This new location represents a major milestone for Porter Logistics and offers a unique opportunity to help launch, shape, and grow operations from the ground up while being supported by an established, Atlanta-based organization. This is a tight-knit team where leaders know you by name, your work creates visible impact every single day, and hard work gets rewarded with real opportunities. If you're energized by challenge, want limitless growth potential, and thrive in a fast-paced environment where no two days are the same, keep reading. The Role: As a Forklift Operator, you're the engine that powers everything we do. You'll safely operate multiple types of equipment (sit-down, stand-up, cherry picker, reach) while loading, unloading, sorting, staging, and transporting products through our fast-moving operation. This isn't a clock-in, clock-out job. You'll be a problem-solver who takes ownership, adapts on the fly, and keeps our operation running smoothly when things get dynamic. If you take pride in precision, thrive under pressure, and want your expertise to actually matter, this is your opportunity. What You'll Earn: • $20-22/hour based on experience, • Competitive medical, dental, and vision plans, • Paid time off and company holidays, • Overtime opportunities You'll Thrive Here If You: • Roll up your sleeves and stay hands-on when things get messy, • Run toward challenges instead of away from them, • Want to grow your career with a company that promotes from within, • Value being part of a small, high-energy team where everyone matters This Might Not Be For You If: • You're looking for predictable, repetitive days, • You prefer a big corporate environment with layers of bureaucracy, • You're watching the clock instead of the workWhat You'll Be Responsible For:, • Unload palletized products from containers and trailers using forklifts and other material handling equipment., • Transport and put away product into assigned warehouse storage locations, ensuring proper placement and organization., • Retrieve and pick orders accurately from warehouse storage locations based on pick lists and customer requirements., • Safely load palletized product onto trailers and containers for outbound shipments., • Perform daily inspections and basic maintenance of forklifts to ensure safe operation., • Follow all company policies, standard operating procedures, and safety regulations to uphold a safe and compliant work environment., • Identify and report any product damage, equipment issues, or process concerns promptly. What We're Looking For: • Proven experience as a forklift driver, preferably in a 3PL or logistics environment., • 2+ years of experience operating a forklift., • Familiarity with palletized handling and transport., • Knowledge of warehouse safety practices and procedures., • Ability to operate forklifts and other warehouse machinery safely and efficiently., • Experience with RF scanning devices for inventory tracking and management, • Strong attention to detail and accuracy., • Physical ability to lift and move heavy objects (up to 50 lbs)., • Excellent communication and teamwork skills., • Ability to work in a fast-paced environment while meeting safety and quality expectations The Hiring Process: We value your time and are committed to a streamlined, respectful hiring experience. Candidates selected for further consideration will begin with a brief phone screen with a member of our HR team. If mutual interest is confirmed, you’ll be invited for an in-person interview at our warehouse to meet the team and tour the facility. Powered by JazzHR sqAhselF8p

At River Road, our dedicated team collaborates seamlessly to guarantee our customers experience exceptional service and uncompromised quality from the beginning to the end of your journey. The Ready-Mix Driver is responsible for transporting concrete to/from suppliers and/or to customer job sites. Driver must comply with all DOT/CDL requirements throughout their employment. • Perform pre-trip inspection of the vehicle and report any issues., • Transport goods from or to suppliers and to customers locations., • Add fiber to concrete as needed., • Drive truck in safe manner to jobs arriving with desired slump and/or extra products., • Back up or pull into jobsites, must be able to maneuver truck in uneven and poor terrain., • Place chutes from fender to main chute on front of truck., • Unload concrete in courteous manner., • Keep truck clean both inside and outside., • Report truck defects, accidents, or violations as soon as possible., • Collect and verify delivery instructions., • Document and log work or delivered loads by BOL's on tablet or turn them into the batch house., • Receive customer or loader operator stamp or signatures., • Fuel truck when needed, turn in fuel receipts for reimbursement., • Comply with all truck driving rules and regulations (size, weight, route, parking, and break periods) as well as with company policies and procedures., • Maintain a clean driving record and report any changes to driving record., • Abide by all health and safety procedures by maneuvering safely around plant and customer sites., • Submit vehicle inspection report daily., • Maintain professionalism and friendliness management, co-workers and customers at all time., • Fulfill other tasks as requested by management., • High School Degree, GED or equivalent., • Operate a Motor Vehicle over 26,000 pounds., • Must have the ability to understand and follow operational procedures., • Valid CDL class License, • Clear Motor Vehicle Record Check, • Ability to pass a federal motor carrier drug/alcohol screening and physical., • Pass DOT Clearinghouse inspection., • Must have ability to read, write and speak English at a moderate to proficient level., • Must be able to do simple math., • Must have the ability to work independently., • Must have the ability to follow directions., • Ability to pass a criminal background check clearance., • This is moderately strenuous work. The driver must climb in and out of truck approximately 50 times per day. The bottom of the seat is approximately 50 inches from the ground. The first step is two feet off the ground, with the second step one foot higher. A bar or handle is provided to help the driver pull himself into the cab., • Each truck is equipped with levers and pedals which are used to control the many parts of the truck while driving and during the process of unloading concrete. The driver must have coordination between hands and feet to accomplish these procedures. This could average over 100 times a day., • The driver must also climb a ladder at the front of the truck approximately 13 feet high. This ladder is not only used to check the concrete, but to carry products, weighing up to 90 pounds, that are to be added to load., • Drivers must pull down the main chute on the truck and attach up to four more chutes at every job. It takes approximately 60 pounds of force to pull the main chute down. Additional chutes are stored on the truck fender with straps that take approximately 45 pounds of pressure to release the strap. The additional chutes weigh approximately 60 pounds each and take approximately 60 pounds of lift to lift the chute. Each chute must be lifted from ground to shoulder when returning the chute to its beginning position., • Drivers must wash and clean their trucks with brushes and a hose. This requires a fair amount of climbing on the truck., • Drivers work outdoors the majority of the time. Weather conditions such as temperature, moisture and other conditions have a significant impact on the job. Therefore, drivers must tolerate, with or without reasonable accommodations, being exposed frequently to extreme weather conditions., • Jobsites vary greatly due to weather and location conditions. The ground is usually rough, muddy or icy. The driver must be able to tolerate varied work conditions., • There are high noise levels and significant vibration associated with this position. This may be caused by the truck, construction equipment and jobsite noise. The driver must be able to tolerate, with or without reasonable accommodation, intermittent exposure to noise, vibration and other aggravation conditions at or around the operating sites., • There are other physical hazards that endanger life, health or bodily injury, such as proximity to moving, mechanical parts, falls, environmental conditions, moving equipment and other hazards., • There is also exposure to cement, lime, concrete admixtures, dust, diesel fuel and other substances which may be toxic, cause burns or be explosive. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Position Summary The Wastewater Technician is responsible for operating, monitoring, and maintaining the facility's wastewater treatment systems to ensure safe, efficient, and environmentally compliant operations. This role performs routine testing, monitors treatment processes, adjusts chemical dosing, maintains equipment, and ensures compliance with all applicable environmental regulations and company standards. Essential Duties and Responsibilities • Operate and monitor effluent treatment plant equipment, including pumps, valves, aerators, mixers, filtration systems, and related treatment equipment., • Monitor treatment processes to ensure wastewater is treated effectively and discharged in accordance with regulatory permit requirements., • Collect wastewater samples and perform routine laboratory testing, including pH, conductivity, and other required analyses., • Calculate and adjust chemical feed rates to maintain proper treatment performance and water quality standards., • Inspect gauges, meters, instrumentation, and control panels to verify proper system operation., • Maintain accurate operating logs, inspection records, laboratory results, and regulatory documentation., • Perform routine preventive maintenance, including cleaning tanks, filters, pumps, and associated equipment., • Identify equipment malfunctions and coordinate repairs with maintenance personnel as needed., • Monitor chemical inventory and notify management when supplies require replenishment., • Ensure compliance with all federal, state, and local environmental regulations, permit requirements, and company policies., • Maintain a clean, organized, and safe work environment while following all applicable safety procedures and wearing required personal protective equipment (PPE)., • Assist during environmental inspections and audits by providing required documentation and operational support., • Respond to operational issues or emergencies as necessary to maintain continuous treatment operations., • Perform other duties as assigned.QualificationsRequired, • Valid state Effluent Treatment Plant (ETP) or Wastewater Operator License appropriate for the facility., • Valid driver's license with an acceptable driving record., • High school diploma or GED., • Basic mechanical aptitude and troubleshooting skills., • Ability to read gauges, meters, technical manuals, and operating procedures., • Strong attention to detail with the ability to maintain accurate records., • Ability to work independently while collaborating effectively with maintenance, production, and environmental teams., • Knowledge of wastewater treatment processes, chemical handling, pumps, motors, and process controls. Knowledge, Skills, and Abilities • Understanding of wastewater treatment principles and environmental regulations., • Ability to perform basic laboratory testing and interpret results., • Mechanical troubleshooting and preventive maintenance skills., • Strong organizational and documentation abilities., • Effective verbal and written communication skills., • Ability to prioritize work and respond appropriately to changing operational needs.Physical Requirements, • Ability to stand, walk, climb stairs and ladders, bend, kneel, and lift up to 50 pounds., • Ability to work indoors and outdoors in varying weather conditions., • Ability to wear required PPE, including respirators, gloves, eye protection, hearing protection, and protective clothing., • Ability to work around chemicals, wastewater treatment equipment, and industrial machinery safely.Work Environment This position works primarily in an industrial manufacturing environment with exposure to wastewater treatment systems, chemicals, moving mechanical equipment, noise, and varying temperatures. The employee must follow all environmental, health, and safety requirements. Certifications • Valid State Wastewater/ETP Operator License (required).

Warehouse Associate – Equipment Operator (Cherry Picker) Port Wentworth, GA • Full-time & Part-time Earn $24.25–$26.25/hour in 3–4 day work weeks with multiple day and night shifts available. No resume required, fast, simple application, apply in minutes. Join Wayfair's warehouse team operating order picker/cherry picker equipment to move customer orders safely and fast. Why You'll Love This Job Competitive pay, paid weekly, plus overtime and shift premiums Earn up to a $1,600 Peak Season Bonus on top of your hourly pay — apply today! Day-one medical/dental/vision, 401(k) match, PTO, tuition reimbursement, employee discounts and perks Full certification and safety training provided Real path into lead and operations roles What You'll Do Operate order pickers, pallet jacks, and related equipment to pick, move, and stage furniture and home goods Lift up to 75 lbs solo and maneuvering products up to 150 lbs unassisted Use handheld scanners/tablets to locate, pick, and update orders Inspect, assemble and prep large product so it arrives damage-free What You'll Bring 6+ months of experience on a cherry picker/order picker (required) Comfortable operating equipment at heights up to 40 ft Able to stand, bend, and lift throughout a full shift Comfortable using scanners/tablets and reading instructions in English You’ll do great at Wayfair if you like staying active all shift, feel confident on equipment, being part of a team and want stable, well-paid warehouse work. Assistance for Individuals with Disabilities Wayfair is fully committed to providing equal opportunities for all individuals, including individuals with disabilities. As part of this commitment, Wayfair will make reasonable accommodations to the known physical or mental limitations of qualified individuals with disabilities, unless doing so would impose an undue hardship on business operations. If you require a reasonable accommodation to participate in the job application or interview process, please let us know by completing our _. Need Technical Assistance? For more information about applying for a career at wayfair, visit our _. About Wayfair Inc. Wayfair is one of the world’s largest online destinations for the home. Whether you work in our global headquarters in Boston, or in our warehouses or offices throughout the world, we’re reinventing the way people shop for their homes. Through our commitment to industry-leading technology and creative problem-solving, we are confident that Wayfair will be home to the most rewarding work of your career. If you’re looking for rapid growth, constant learning, and dynamic challenges, then you’ll find that amazing career opportunities are knocking. No matter who you are, Wayfair is a place you can call home. We’re a community of innovators, risk-takers, and trailblazers who celebrate our differences, and know that our unique perspectives make us stronger, smarter, and well-positioned for success. We value and rely on the collective voices of our employees, customers, community, and suppliers to help guide us as we build a better Wayfair – and world – for all. Every voice, every perspective matters. That’s why we’re proud to be an equal opportunity employer. We do not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, genetic information, or any other legally protected characteristic. Your personal data is processed in accordance with our Candidate Privacy Notice (https://www.wayfair.com/careers/privacy). If you have any questions or wish to exercise your rights under applicable privacy and data protection laws, please contact us at dataprotectionofficer@wayfair.com.

Job DescriptionReach Truck Operator Location: Pooler, GA Pay: $17.50/hour Schedule: Monday–Friday, day shift Position Overview Kelly Services is hiring an experienced Reach Truck Operator to support warehouse operations in Pooler. This position is responsible for safely moving, storing, and organizing materials while maintaining accurate inventory and a clean, safe work environment. Key Responsibilities • Load and unload goods from trucks, containers, and trailers., • Transport palletized and crated materials throughout the facility., • Stack products in designated storage areas according to inventory procedures., • Ensure loads are properly secured before moving or storing them., • Stack and organize empty pallets., • Complete daily equipment inspections., • Recharge equipment batteries or change propane tanks as needed., • Remove attachments, debris, and waste from machinery., • Inspect products for quality and report any issues., • Maintain accurate records and follow all warehouse procedures., • Keep work areas clean, organized, and free of safety hazards.Qualifications, • OSHA-compliant forklift certification required., • At least one year of forklift or reach truck experience preferred., • Strong reading, writing, language, and basic math skills., • Excellent attention to safety and detail., • Ability to follow instructions and maintain accurate records., • Reliable, punctual, and committed to a strong work ethic., • Ability to work independently and as part of a team., • Commitment to maintaining a clean and safe work environment. Apply today to join the Kelly Services team in Pooler! As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Put your skills to work. There are a lot of different light industrial jobs out there. Kelly® Professional & Industrial recruiters are focused on only offering opportunities with companies that provide competitive pay, safe work environments, and cultures that recognize your value. Whether you’re looking for flexible shifts, performance bonuses, or a progressive work culture-we’re dedicated to finding the very best opportunities for you. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Local Owner Operator Driver – Savannah, GA NGL Transportation is seeking experienced Owner Operators based in the Savannah, Georgia area. This position primarily handles regional freight originating from Savannah, with most loads operating within a 4–5 hour one-way radius. Drivers are generally home daily, although some loads may require an overnight stay and return the following day. Position Details • Home Daily (most loads), • Some loads may require up to 1.5 days, • Occasional Saturday deliveries available, • Additional earning opportunities for drivers with a valid TWIC card who can perform port-related moves, • Consistent freight opportunities, • Weekly settlements through ADP Compensation • Competitive mileage-based pay, • Additional revenue opportunities for port work, • Weekly pay after an initial two-week settlement hold Insurance Program NGL Transportation provides: • $1,000,000 Auto Liability Coverage, • $100,000 Cargo Coverage, • $30,000 Trailer Interchange Coverage, • Occupational Accident (OCC/ACC) Coverage Owner Operators are responsible for maintaining: • Non-Trucking Liability (NTL) Insurance, • Bobtail Insurance A flat $100 per week insurance deduction will be deducted from settlements. Minimum Qualifications • Valid Class A CDL, • Minimum 1 year of recent CDL Class A driving experience, • Minimum 6 months of intermodal/container hauling experience using chassis, • Ability to safely operate in port and terminal environments, • TWIC Card preferred but not required Safety & Compliance Requirements • Drivers with no preventable accidents within the past 3 years are strongly encouraged to apply, • Must pass all required drug and alcohol screenings, • Must successfully pass a background check, • Any current or prior SAP participation must be disclosed during the application process, • No unresolved drug or alcohol violations, • Must remain compliant with FMCSA regulations Additional Information • Drivers residing in Savannah, Pooler, Garden City, Dublin, Macon, and Columbus, GA are encouraged to apply., • Drivers are responsible for ensuring that tractors, chassis, and containers are parked only in safe and authorized locations., • The driver assumes full responsibility for the security and protection of equipment while in their possession. How to Apply Text the following information to 213-479-2919: • Full Name, • City of Residence, • CDL Experience, • Intermodal/Port Experience Or email your resume directly to: dsp.sav@ngltrans.net Qualified applicants will be contacted promptly. NGL Transportation INC Savannah, Georgia

Job Description Class A CDL OTR Opportunities – Rental & Company Drivers GET $3K Sign In Bonus | Generous Fuel Discount | No Down Payment A good driver can make more than 13k average every week We are currently expanding our fleet and looking for CDL Class A drivers interested in Rental (Owner-Operator) or Company Driver positions. If your goal is consistent miles and a high weekly income, we have options tailored to your needs. New equipment: Late model trucks (2025–2026): Peterbilt, Kenworth, Volvo 860 & 760, Freightliner Cascadia Equipped with an APU, inverter, refrigerator, and microwave 53’ Dry Van trailers: Utility, Great Dane, Wabash Rider and pet policy available Owner-Operator Rent Option: Earn up to 88% of load revenue Average weekly gross: $9,000 – $14,000+ Consistent 3,500+ miles per week 3 Weeks Out, 3 Days Home Weekly direct deposits, or a quick pay option - be paid after every load Company Driver Position Available: $0.80 per mile 3,500+ miles weekly average Paid for all miles (loaded + empty) OTR schedule: 3 weeks out, 4 days home No-touch dry van freight Additional Benefits: Freedom to choose loads (no forced dispatch) Fuel savings program - Generous fuel discount Access to cash advances Referral bonuses Clean DOT inspections bonuses 24/7 dispatch and maintenance support Quick onboarding process Transportation assistance available SAP drivers accepted (marijuana cases only) Driver Requirements: Minimum 2 years CDL-A experience Able to stay on the road for OTR runs Clean driving record (no major violations for 2 years or DUI in the past 5 years) Get Started Today, Call: (872) 259-1406 Multiple options available — whether you want to drive, rent, or grow into ownership with a lease to purchase.

Job Description NIGHT SHIFT DUMP TRUCK DRIVER CDL A DRIVER / AUTOMATED LOADOUT OPERATOR Department: Transload Operations Shift: Night Shift Classification: Full-Time / Safety-Sensitive Reports To: Operations Manager / Shift Leadership Position Summary The Night Shift Dump Truck Driver / Automated Loadout Operator is a blended position responsible for safely operating a commercial dump truck and independently loading material through AMW's automated loadout system. The driver will use a tablet to select and confirm load information, position the truck, operate the loading controls, verify weights, complete required documentation, and transport material as assigned. Because this role works primarily at night with limited direct supervision, the successful candidate must be dependable, self-motivated, safety-focused, and able to recognize and communicate problems before they affect employees, equipment, product quality, customers, or delivery schedules. Key Responsibilities Commercial Driving and Delivery · Safely operate a dump truck and related commercial equipment in compliance with company policy and all applicable DOT, state, and local requirements. · Perform assigned nighttime material movements and deliveries while following approved routes, schedules, site rules, and customer instructions. · Complete thorough pre-trip and post-trip inspections and promptly report defects, damage, maintenance concerns, incidents, or unsafe conditions. · Maintain legal axle and gross vehicle weights and ensure the load is properly distributed, contained, and secure before travel. Automated Self-Loading Operations · Use a company-provided tablet and automated loading system to select the correct order, customer, material, destination, and target weight before loading. · Confirm the truck is correctly positioned and that the loading area is clear before initiating the load cycle. · Monitor the entire load cycle, verify displayed weights and alarms, and stop the process immediately if an unsafe condition, wrong product, equipment issue, or abnormal reading is observed. · Follow approved procedures for load verification, scale tickets, load adjustments, and system shutdown. Never bypass safeguards or attempt repairs outside authorized training. Documentation and Communication · Accurately complete electronic and paper load records, inspection reports, delivery tickets, fuel records, and other required documentation. · Maintain timely communication with operations leadership regarding completed loads, delays, product or weight discrepancies, equipment alarms, breakdowns, customer concerns, and emergencies. · Protect customer, shipment, and company information and ensure each load is matched to the correct documentation before departure. Night Shift Ownership · Work independently and remain productive with limited supervision while following established priorities and procedures. · Plan work to meet loading and delivery expectations without sacrificing safety, accuracy, equipment care, or product integrity. · Maintain the truck cab, dump body, loadout area, and assigned workspaces in a clean and orderly condition. · Support other terminal duties within training and qualification when operational needs require. Required Qualifications · Valid Class A Commercial Driver's License (CDL A) with an acceptable driving record. · Ability to meet all applicable DOT driver qualification, medical certification, and drug/alcohol testing requirements. · Demonstrated experience safely operating dump trucks, tractor-trailers, or comparable heavy commercial vehicles. · Ability and willingness to work a night-shift schedule, including overtime, weekends, or holidays when business needs require. · Comfort using a tablet, touchscreen controls, electronic forms, and basic automated equipment interfaces. · Ability to read and follow load instructions, safety procedures, warning messages, delivery documents, and posted signage. · Reliable attendance, sound judgment, and the ability to work independently in a safety-sensitive environment. Preferred Qualifications · Two or more years of commercial driving experience, preferably involving dump trailers, bulk materials, terminals, ports, warehouses, construction, or industrial facilities. · Experience with automated loadout systems, truck scales, electronic logging devices, or transportation management applications. · Basic mechanical awareness and experience recognizing abnormal equipment sounds, alarms, leaks, or operating conditions. Core Competencies · Safety ownership and rule compliance · Self-motivation and personal accountability · Attention to load, product, and documentation accuracy · Dependability and time management · Clear communication and timely escalation · Good judgment under limited supervision Physical and Work Environment Requirements · Regularly enter and exit commercial vehicles, climb steps and ladders, bend, reach, and perform vehicle and load inspections. · Work outdoors and in industrial areas during nighttime hours in heat, cold, rain, dust, noise, and changing weather conditions. · Maintain the visual, hearing, physical, and cognitive ability required to safely operate a commercial motor vehicle and automated loading equipment. · Wear required personal protective equipment and comply with all AMW, customer-site, and regulatory safety requirements. Performance Expectations Success in this role is measured by safe driving, accurate self-loading, on-time completion of assignments, complete documentation, proper equipment care, reliable attendance, and prompt communication when conditions require assistance or escalation. Equal Opportunity Statement Atlantic Marine Warehouse is an equal opportunity employer. Employment decisions are made without regard to any status protected by applicable law. Reasonable accommodations may be provided to qualified individuals with disabilities in accordance with applicable law.

Job Description Moran Environmental Recovery, LLC (MER) is an integrated environmental company specialized in providing services to Energy and Industrial, Commercial and Naval Marine, Railroad and Government clients. With operations based in strategically located resource centers along the United States eastern and gulf coasts, the services we perform range in scope from routine maintenance work, utilizing vacuum trucks and high-pressure washing equipment to large-scale site remediation and abatement. Our core competencies involve specialized risk management tools and are performed in strict compliance with complex regulatory requirements. We provide these services using in-house resources, enabling exceptional quality control enjoyed by few companies in our industry. Job Summary The Vacuum Truck Operator must be able to work in compliance in the delivery of MER’s four (4) core service lines (Emergency Response, Industrial and Marine Services, Facility Decontamination, and Site Remediation). Drivers must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. Job Responsibilities • Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision., • Drive an average of 30% of the time as well as work onsite as part of a team. Depending on location, drivers may be asked to perform the duties of a Field Technician if business needs warrant it., • Correct completion of all job-specific, employee-related and equipment-related MER paper work including Timesheets, Daily Work Reports, Driver’s Logs, Pre and Post Vehicle Inspection and Daily Tailgate Safety Meeting Forms., • Understand and enforce project’s detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures., • Work safely during all phases of performing the job duties required in the field., • Ability to perform work inside areas of varying dimensions, involving squatting and crawling for possible extended periods., • Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans., • The ability to safely drive and perform safety checks on all vehicles for which licensed., • Operate various vehicles safely, including but not limited to Vacuum Truck, Vacuum Trailer, Turbo-Vac, Roll-Off Truck and Hydro Vac., • Project work may require out of town travel for two weeks or more, • Must be able to understand and comply with company and client safety standards., • Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project., • Work outside year round in all types of weather., • May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc., • May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more., • Must be clean shaven at all times to allow immediate donning and seal of respirator. Qualifications • Must be able to effectively operate a manual transmission., • Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills) and 2-3 years of experience operating vacuum trucks (or similar equipment)., • Additional experience in related work (emergency response, manual labor, industrial cleaning) is preferred., • A valid Class “A” Commercial Driver’s License (CDL) with Hazmat and Tanker endorsements is required., • Experience with construction equipment and heavy haul/end dump is required, • TWIC Preferred., • OSHA 40-HR HAZWOPER and Confined Space Entry certifications are desired but not required., • Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. Benefits • Competitive Salary, • Health, Dental and Vision Insurance, • 401k with Company Match, • Paid Time Off (PTO), • Paid Holidays Moran Environmental Recovery is an Equal Opportunity Employer. #HP

At Fuji Vegetable Oil, our people help keep a 24/7 food-grade manufacturing operation safe, reliable, and moving forward. You will learn how specialty vegetable-oil products move through interconnected process equipment, perform field rounds, operate and monitor pumps/valves/filter systems, collect

Savannah, GA Full time 26141 At GAF, we cover more than just buildings. We cover each other. Under this roof, you will have the tools and resources you need to grow and develop in your career. You will experience our incredible culture and will be empowered to support your teammates, your customers, and especially your community. Under this roof, we define the future while leading the present through our deep well of experience and our responsibility to the future to drive improvements and innovation in our products. We are GAF. And under this roof, we protect what matters most. Job Summary We are looking for a Production Supervisor who will be responsible for supervising production shifts as assigned on a rotating basis, including process, packaging, maintenance and yard personnel. The Production Supervisor will be responsible for safety, quality and productivity through direct leadership and coordination of production. Essential Duties + Drive productivity and foster continuous improvement through sound management practices including communication of goals, training of operators, and operation of machines within established process specifications, and identification and resolution of production related issues. + Maximize production efficiencies, achieve targeted raw material usages, and minimize yield losses while producing high quality product in a safe manner. + Troubleshoot and quickly resolve production method or machinery issues that are impacting run rates, downtime, or quality. + Provide a safe workplace through adherence to company safety policy, housekeeping, and defined standards of training. + Monitor compliance to safety policies and procedures, conduct inspections of plant areas, and ensure deficiencies found are resolved or appropriately communicated + Maintain an excellent quality level of product produced at the lowest cost. Monitor key operating parameters to ensure the product adheres to specifications while minimizing raw material usage. Work with production operators to identify and reduce controllable quality issues. Ensure each operator completes required quality checks. Review results of audits performed by the QA department and communicate to the production crew. Provide feedback to production crew on all field complaints. + Participate in the selection discussion for filling open operator positions and participate in the interview process for new production personnel. + Support communication throughout the plant and communicate the bonus program to employees at the plant. + Monitor and address poor attendance issues in a timely manner. Solicit and obtain coverage for absences and vacations. + Maintain accurate timekeeping for production employees and ensure timecards are approved on time Qualifications Required + H.S. Diploma or General Education Degree (GED) required + Associate's Degree or Bachelor's degree in Engineering, Business or associated fields preferred + 3 years as a production supervisor or 5 years as a lead operator in an industrial manufacturing environment or 1 year of supervisory experience with a bachelor's degree Qualifications Preferred + Experience in a continuous process manufacturing environment. Base salary and/or rate of pay ranges listed are exclusive of fringe benefits and potential bonuses. Individual compensation offers will be determined based on a variety of factors, including but not limited to geographic location, relevant candidate experience and skill, education, and/or qualifications. Base Salary Range: $76,000-$104,500 How We Protect What Matters Most: 1. We offer a wide range of health insurance options that include medical, dental, and vision for you and your family. 2. Our Family-Building benefits support the many different journeys to fertility and parenthood. 3. Our robust 401K plan includes an employer match contribution with your pre-tax and/or Roth contributions. 4. Other exciting programs and perks are available to help employees achieve work-life balance, including (but not limited to) a wellness program, free financial coaching, a referral program, and product rebates when purchased for an employee's primary residence. 5. Professional growth and development are very important to us! We offer internal training programs and courses, as well as a generous tuition reimbursement program. 6. We're committed to fostering a culture that reflects our values to connect, empower, evolve, and inspire. We offer many opportunities for employees to connect with one another, including through our Employee Resource Groups who focus on education and allyship for all of our employees. GAF complies with federal, state, and local disability laws and makes reasonable accommodations for applicants and employees with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact HR Services at 833-HR-XPERT. We believe our employees are our greatest resource. We offer competitive salary, benefits, 401k, and vacation packages for all full time permanent positions. We are proud to be an equal opportunity workplace. We are committed to equal employment opportunity on the basis of each candidate's qualifications, experience, and merit, without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a disability or special need that requires accommodation, please let us know. If applying for positions in the U.S., must be eligible to work in the U.S. without need for employer sponsored visa (work permit). Privacy Notice (https://www.gaf.com/en-us/about-us/privacy-and-legal/privacy-policy) Applicant Notice With 130+ years in the industry, GAF is the leading roofing manufacturer in North America. As a member of the Standard Industries family of companies, we are also part of the largest roofing and waterproofing business in the world. Our communities help give our work meaning and the products we manufacture help protect what matters most. The shingles help to shelter the families living in the homes in our towns. The TPO helps protect what is under that hospital's roof. In addition to quality products, we make sure they are installed by quality craftsmen and women. The full GAF portfolio of solutions is supported by an extensive national network of factory-certified contractors. GAF continues to be the leader in quality and offers comprehensive warranty protection on its products and systems. Our success is driven by a commitment to empowering our people to deliver advanced quality and purposeful innovation and the desire to protect what matters most.

The Production Supervisor will be responsible for safe Production Supervisor, Supervisor, Production, Production Operator. We are looking for a Production Supervisor who will be responsible for supervising production shifts as assigned on a rotating basis, including process, packaging, maintenance a

Job Description POSITION OVERVIEW: South Shore is looking for a full-time Field Technician to help manage the day-to-day physical workload required around our office, warehouse, and in the field. This role is ideal for someone who wants to get into a reputation-focused organization remodeling company to learn the products, professional habits, and work ethic to eventually become a project manager in the ever-growing and consistent world of exterior remodeling, IF they choose that path later of course. (Our South Shore Project Manager's compensation is at 85k+ annually for reference!) ABOUT SOUTH SHORE: For over 10 years, South Shore Roofing has been known to provide the most reputable roofing experience for homeowners. We have set the industry standard for the highest quality work combined with exceptional customer service. With over 1250+ 5 Star Google reviews – our homeowners agree. Our reputation has been earned by our mission to create extraordinary customer experiences and final product quality through personal authenticity, a problem solving mindset, a drive for excellence, organized process, willingness to take accountability, and honest transparency. RESPONSIBILITIES: 40% | Material Running or Field Tasks for Construction Projects and Office Duties 20% | Office Yard & Warehouse Tasks – Unloading and Loading Inventory, Forklift Driving, Heavy Lifting 20% | Office Tasks – Marketing Folder Assembly, Yard Sign Assembly, Organizing, Pest Control, Various Tasks 5% | Job Site Assigned Inspections and Photo Taking for Production Needs 5% | Landscaping Work – Weeding, Raking, Blowing, Watering, & More (2~ Hours Per Week) 10% | Various Other Tasks Assigned by Management COMPENSATION: • $25 / Hour, • W2 Weekly Pay via Direct Deposit SCHEDULE: 7:30 AM START • 30 MINUTE LUNCH - 4:00 PM END WHO WE ARE LOOKING FOR: • DRIVERS LICENSE, BACKGROUND CHECK, INTENSIVE DRUG TEST IS REQUIRED, • Truck and trailer driving experience, • Driver's license and personal vehicle to get to our office daily, • You have the ability to work and lift heavy materials in the hot summer outdoors., • You have the ability to load up the heavy shingles, metals, and lumber multiple times a day., • You have great character and are known for your integrity., • You like to work, and work hard., • You are an independent operator and work without supervision well., • You are detail focused., • You like being hands-on and working with your hands when you can., • You are a respected individual with a driven, high-energy, go-getter personality that gets things done., • You love helping people., • You are positive and motivated even more with challenges., • You have a curiosity for learning more. OUR TEAM: Our team is made up of many unique personalities – but the core values we share are the same. The people here are genuine, no-drama, no-nonsense, hard-working individuals who pursue success and security for themselves, their families and their loved ones. What brings us all together is our commitment to effort and a passion for our work. A MESSAGE FROM THE OWNER: It is my own life mission to raise the bar and push the possibilities of anything I work on. And in a modern culture that is no longer effortful and standards are being lowered everywhere you look – South Shore is very different. It is challenging to work here and you have to be great at what you do. This is because our standards are high – well above and beyond most in the construction world right now. But...the reward of being here is working with people that truly care about what they do and perform at the highest level. Our customers will constantly tell you how impressed they are with our people and our work. For you, this will bring a lot of self-respect, strength in your character, and belief in what you’re a part of. \nCompany Description For almost 10 years, South Shore Roofing has been known to provide the most reputable roofing experience for homeowners. We have set the industry standard for the highest quality work combined with exceptional customer service. With over 750+ 5 Star Google reviews – our homeowners agree. Our reputation has been earned through a daily, weekly, monthly and yearly pursuit of our company goal. Which has, is and will continue to be creating extraordinary customer experiences and final product satisfaction through personal authenticity, a positive problem solving mindset, a rare passion and drive for excellence, willingness to take accountability and honest transparency. If you want to work with a team of no-excuses, goal driven, positive, and passionate high performers who are and continually strive to stay the best in their field...then South Shore is for you. For almost 10 years, South Shore Roofing has been known to provide the most reputable roofing experience for homeowners. We have set the industry standard for the highest quality work combined with exceptional customer service. With over 750+ 5 Star Google reviews – our homeowners agree. Our reputation has been earned through a daily, weekly, monthly and yearly pursuit of our company goal. Which has, is and will continue to be creating extraordinary customer experiences and final product satisfaction through personal authenticity, a positive problem solving mindset, a rare passion and drive for excellence, willingness to take accountability and honest transparency. If you want to work with a team of no-excuses, goal driven, positive, and passionate high performers who are and continually strive to stay the best in their field...then South Shore is for you.

Job DescriptionCertified Maintenance TechnicianCourtney Station Apartments | Pooler, GA Multifamily Maintenance • HVAC • Apartment Maintenance • Property Management Competitive Pay + Bonus Opportunities + Housing Discount + Excellent Benefits Are you an experienced Apartment Maintenance Technician looking to join a professional property management team that values its employees and residents? We are seeking a skilled, reliable, and customer-focused Maintenance Technician to support the daily operations of our premier apartment community in Pooler, Georgia. This is an excellent opportunity for a maintenance professional with experience in multifamily housing, apartment maintenance, building maintenance, HVAC systems, plumbing, electrical repair, carpentry, make-ready turns, and preventive maintenance. As a key member of our team, you'll help maintain a safe, attractive, and welcoming community while delivering exceptional service to our residents. Why Join Our Team? • Competitive compensation, • Performance-based bonus opportunities, • 401(k) with company participation, • Medical, Dental, Vision, Life Insurance, • HSA and FSA options, • Paid vacation, sick leave, personal days, and holidays, • Employee Assistance Program (EAP), • Paid volunteer time, • On-site housing discount available, • Career growth and advancement opportunities, • Work at an IREM Certified Sustainable PropertyPosition Summary Under the direction of the Community Manager and Maintenance Supervisor, the Maintenance Technician performs maintenance service requests, preventative maintenance, apartment turns, and property repairs to ensure the community remains in excellent condition. The ideal candidate is a hands-on problem solver who takes pride in quality workmanship, excellent customer service, and maintaining high community standards. Key Responsibilities • Complete resident work orders accurately, efficiently, and professionally, • Diagnose and repair HVAC, plumbing, electrical, appliance, and mechanical systems, • Perform preventative maintenance programs throughout the community, • Assist with apartment turns, make-readies, and move-in preparations, • Inspect buildings, roofs, common areas, amenities, and grounds, • Troubleshoot and repair maintenance issues in occupied and vacant apartment homes, • Maintain inventory, shop organization, and maintenance equipment, • Ensure compliance with safety procedures, company policies, and sustainability initiatives, • Support pool maintenance and community amenity upkeep, • Participate in an on-call rotation for emergency maintenance services, • Deliver exceptional customer service while interacting with residents, vendors, and team members, • Assist in maintaining curb appeal and overall property appearanceRequired Qualifications, • Minimum 2 years of apartment maintenance, multifamily maintenance, residential maintenance, construction, facilities maintenance, or building maintenance experience, • Strong knowledge of:, • HVAC systems, • Plumbing repairs, • Electrical troubleshooting, • Appliance repairs, • Drywall and painting, • Carpentry, • General maintenance, • HVAC Certification required, • Ability to work independently and prioritize multiple projects, • Reliable transportation and valid driver's license, • Must provide basic maintenance hand tools, • Strong work ethic, attendance record, and commitment to customer service, • Ability to participate in an on-call rotation and respond to after-hours emergenciesPreferred Qualifications, • Certified Pool Operator (CPO), • Experience with apartment turns and make-ready processes, • Previous multifamily property management experience, • Knowledge of preventive maintenance programs, • Experience working with Yardi, RealPage, Entrata, or other property management softwareIdeal Candidate Profile We are looking for a dependable maintenance professional who enjoys solving problems, takes pride in their work, and understands the importance of resident satisfaction. The ideal candidate has apartment maintenance experience, strong HVAC and troubleshooting skills, excellent customer service abilities, and a team-first attitude. #ZIPDH BG Staffing is an Equal Opportunity Employer. We are committed to providing equal opportunities for employment to all qualified people, regardless of race, color, national origin, religion, sex, age, disability status, veteran status, genetic information, or any other characteristic protected by applicable federal, state, or local law. BG Staffing uses artificial intelligence (AI) and other automated decision-support tools to assist in the recruiting and hiring process. See https://www.bgsf.com/ai-notice for more details. \nCompany Description Thirty years is a long time to be doing anything — long enough to know exactly what we're good at. At BG Staffing, that's people. We're the largest staffing firm in the country dedicated entirely to property management, which means when you work with us, you're not just another resume in a pile. You're the reason we exist. Here's how it works: we match your skills and goals to real opportunities with multifamily and commercial real estate clients across 47 states, whether you're leasing apartments, keeping the grounds looking sharp, or making sure the maintenance calls never pile up. We know this industry inside and out, and we use that expertise (plus a little AI-powered magic) to get you placed fast, not lost in a queue. But speed isn't the whole story. Our recruiters actually show up — checking in, cheering you on, and having your back when you need support. We believe your work is the human amenity that keeps communities running, and we treat it that way. Temp, temp-to-hire, or permanent, we'll help you find the fit that moves your career forward. That's the difference between a staffing agency and a team that's actually got your back. We're proud to be the team behind the team! Thirty years is a long time to be doing anything — long enough to know exactly what we're good at. At BG Staffing, that's people. We're the largest staffing firm in the country dedicated entirely to property management, which means when you work with us, you're not just another resume in a pile. You're the reason we exist.\r\n\r\nHere's how it works: we match your skills and goals to real opportunities with multifamily and commercial real estate clients across 47 states, whether you're leasing apartments, keeping the grounds looking sharp, or making sure the maintenance calls never pile up. We know this industry inside and out, and we use that expertise (plus a little AI-powered magic) to get you placed fast, not lost in a queue.\r\n\r\nBut speed isn't the whole story. Our recruiters actually show up — checking in, cheering you on, and having your back when you need support. We believe your work is the human amenity that keeps communities running, and we treat it that way. Temp, temp-to-hire, or permanent, we'll help you find the fit that moves your career forward.\r\n\r\nThat's the difference between a staffing agency and a team that's actually got your back. We're proud to be the team behind the team!

Job DescriptionA locally owned Construction Company in the Beaufort, SC, area is expanding! We are seeking an Experienced Foreman to join our team. The ideal candidate will have experience in various aspects of underground utilities, water and sewer work, and storm drain, grading math, and managing a crew. Responsibilities include but not limited to: • Operate heavy equipment such as excavators and front loader trucks to excavate and backfill trenches., • Work on construction sites to install storm drainpipe and be well versed in trench safety., • Operate pipe lasers to ensure proper alignment during installation., • Assist in concrete forming for sewer structures., • Utilize bulldozers for site preparation and grading., • Plumb sewer lines to ensure proper flow and functionality.Skills:, • Proficiency in trackhoe operation and pushing a crew., • Knowledge of construction site protocols and safety measures., • Competence in heavy equipment operation, including bulldozers., • Familiarity with concrete forming for sewer structures., • Ability to work on pipeline installations and repairs., • Skill in using pipe lasers for accurate alignment.Why Work With Us? Foreman position is paid on-the-job training for a superintendent at this company, with a quick 30-day hiring process! Actively Hiring Now!!! Job Type: Full-time Pay: $28-$32 Expected hours: 40 – 50 per week Benefits: • 401k with 6% match, • 2 weeks paid parental leave, • 2 weeks paid vacation to start, • AD&D insurance, • Dental insurance, • Health insurance, • Life insurance, • On-the-job training, • Paid time off, • Vision insuranceBonuses: Gas card and a cell phone, plus tons of overtime offered!Schedule:, • Day shift, • Monday to Friday, • Overtime, • Year-round workLicense/Certification:, • Driver's License (Required)., • Local to Beaufort, SC, and the surrounding areas., • no travel and no per diem. Are you a talented heavy equipment operator who has experience laying storm drainage and other utilities? If so, apply today!

Job Description Maintenance Technician – The Lilianna in Pooler, Georgia The Maintenance Technician supports daily maintenance operations for a multifamily community, helping ensure the property remains safe, functional, and well-maintained. This role contributes to asset preservation, resident satisfaction, and overall community performance through timely, high-quality maintenance service. Your Role as a Maintenance Technician As a Service Technician, you will work under the direction of the Maintenance Manager and Community Manager to complete service requests, preventative maintenance, and general repairs. This role plays a key part in maintaining the physical condition of the community while supporting service standards and operational efficiency. You will contribute to a safe, clean, and well-functioning environment while collaborating closely with on-site teams and delivering quality service to residents. Key Responsibilities • Complete service requests in a timely manner, prioritizing urgent issues and ensuring quality resolution, • Diagnose and repair maintenance issues, including plumbing, electrical, HVAC, appliances, and general carpentry, • Perform preventative maintenance tasks and support scheduled inspections of building systems and equipment, • Assist with apartment make-readies and unit turnovers to support occupancy and readiness goals, • Maintain accurate documentation of completed work and communicate updates to leadership, • Maintain clean, organized, and safe work areas in accordance with company standards, • Follow all safety guidelines, including OSHA and company policies, • Assist with vendor coordination and notify leadership when additional support is needed, • Participate in emergency response efforts and on-call rotations as required, • Communicate professionally with residents, vendors, and team members to support a positive experienceOur Ideal Candidate for this RoleEducation, • High school diploma, GED, or an equivalent level of education and experienceExperience & Requirements, • Minimum of 1 year of experience in property maintenance, • Flexibility and availability for on-call duty and emergency repairs, • A valid driver's license and reliable vehicle is required for this role for the purpose of on-call emergencies, • Must be able to meet the physical requirements of the role, including frequent lifting of 50 to 80 pounds and occasional lifting up to 100 pounds, with or without reasonable accommodationSkills & Attributes, • Strong mechanical aptitude with experience in plumbing, electrical, HVAC, and general repairs, • Ability to work independently and as part of a team, • Strong communication and customer service skills, • Detail-oriented with a proactive approach to maintenance and safety, • Ability to prioritize tasks in a fast-paced environmentPreferred Certifications, • EPA certification preferred, • HVAC certification preferred, • Certified Pool Operator (CPO) certification a plusWhy This Role Matters The Maintenance Technician plays an essential role in maintaining the quality, safety, and reliability of Thompson Thrift communities. By delivering timely, high-quality maintenance service and supporting preventative care efforts, this role directly impacts resident satisfaction and overall community performance. Why Thompson Thrift Thompson Thrift is an integrated, full-service real estate company engaged in the development, construction, leasing, and management of high-quality multifamily communities nationwide. We're committed to building exceptional places and developing the people who make them possible. At Thompson Thrift, you'll find: • Values-Driven Culture – Excellence, Service, and Leadership guide everything we do, • Career Growth – Training, mentorship, and long-term development opportunities, • Work-Life Support – Competitive benefits, flexibility, and wellness programs, • Real Impact – Hands-on involvement in industry-leading multifamily projects Use of AI in Hiring Thompson Thrift uses AI-assisted tools within our applicant tracking system to support parts of the recruiting process. These tools assist recruiters but do not make hiring decisions or independently determine candidate outcomes. All hiring decisions are made by human reviewers. If you have questions about our hiring process, please contact us at recruiting@thompsonthrift.com. By submitting your application, you acknowledge this information and confirm that the information you have provided is accurate and complete to the best of your knowledge.

Job Description HB NEXT is a fast-growing, technology-enabled Compliance as a Service (CaaS) company supporting the construction, industrial, and utility industries. We are looking for an energetic and motivated individual to join our team as a Utility Substation Inspector - Operational & Visual in the Georgia Market. This is a great opportunity to join a fast paced, high growth company in a key role. The Utility Substation Operational & Visual (O/V) Inspector is responsible for performing consistent, systematic inspections of electrical substations and associated equipment throughout the State of Georgia. This role focuses on identifying observable deficiencies, abnormal conditions, and operational concerns that may impact system reliability, safety, or regulatory compliance. The position supports compliance with utility customer standards, OSHA regulations, and the Georgia High Voltage Safety Act, while ensuring accurate documentation and professional communication of inspection findings. Purpose of Operational & Visual Inspections The O/V Inspection Program provides a structured and repeatable process to evaluate the condition of: Substation facilities Power transformers Circuit breakers Protective devices Buswork Control houses Ancillary and associated substation equipment The objective is to proactively identify visible defects, unsafe conditions, equipment degradation, and operational issues before they result in outages, failures, or safety incidents. Key Responsibilities Perform routine and scheduled Operational & Visual inspections of electrical substations Identify and document: Observable equipment deficiencies / Abnormal operating conditions / Safety hazards / Signs of wear, damage, overheating, oil leaks, corrosion, or contamination Verify equipment status, labeling, grounding, and required clearances Observe and report operational concerns related to breakers, transformers, and protection systems Comply with all applicable safety requirements, including: OSHA standards / Georgia High Voltage Safety Act / Utility-specific safety policies and procedures Accurately complete inspection reports, including: Written findings / Photographic documentation / Severity classification and recommended follow-up actions Communicate inspection findings clearly, professionally, and in a timely manner Maintain inspection schedules and meet established performance timelines Properly use required inspection tools and personal protective equipment (PPE) Minimum Qualifications High school diploma or GED (technical or trade education preferred) Minimum 3 years of experience in one or more of the following: Electrical substations / Utility transmission or distribution systems / Power equipment inspection or maintenance Working knowledge of substation equipment, layouts, and safety practices Preferred Qualifications Prior experience performing Operational & Visual substation inspections OSHA 10-hour or 30-hour certification NERC, NCCER, or equivalent utility-related certifications Experience working around high-voltage systems (69kV and above) Georgia ITS Qualified Operator Completion of the ITS Qualified Operator five-day training Reporting Requirements Complete standardized inspection reports for each assigned facility Clearly document: Inspection date and location / Equipment inspected / Observed deficiencies and conditions / Recommended follow-up actions Submit reports within defined timelines Maintain accurate records in accordance with utility and client requirements Performance Expectations Inspections are conducted consistently and systematically Findings are accurate, objective, and well-documented Strong commitment to safety, quality, and regulatory compliance Ability to work independently with minimal supervision Maintain professional conduct at all times while on utility property Work Environment Outdoor and indoor substation environments Exposure to varying weather conditions Walking and standing for extended periods Proximity to energized high-voltage equipment No hands-on electrical work required Some Travel within the State of Georgia is required. A Company Vehicle is provided. Compliance All inspection activities must comply with: OSHA regulations Georgia High Voltage Safety Act Applicable utility and client policies and procedures

Job DescriptionMES System Analyst II Location - Savannah, GA (5 days on-site) CBU: HMGMA Company Overview Hyundai AutoEver America (HAEA) is the dynamic IT powerhouse behind Hyundai Motor Corporation, a Fortune 500 global leader in the automotive industry. As a key affiliate, we provide cutting-edge IT services and support to top brands including Kia, Genesis, Hyundai Translead, Hyundai Mobis, Hyundai Capital, and Glovis. HAEA offers a truly global and collaborative environment. Here, you’ll drive innovation, boost operational efficiency, and help shape the future of mobility for the Hyundai Motor Group. At HAEA, we understand that IT is the cornerstone of today’s fast-evolving digital world. By uniting all IT resources under one roof, we deliver consistent, top-quality solutions while serving as the crucial information link between Hyundai’s Global Headquarters and North American operations. If you’re passionate about technology and eager to make a real impact at a world-class company, Hyundai AutoEver America is the place to grow your career. Join us and be part of the transformation that’s driving the future of automotive innovation. Website: http://www.haeaus.com Role Overview We seek a skilled and enthusiastic individual to join our dynamic IT team as a "MES System Analyst II.” The MES (Manufacturing Execution System) System Analyst III is pivotal in designing, developing, implementing, and maintaining MES solutions within a manufacturing environment. MES System Analyst III bridges the gap between information technology (IT) and manufacturing operations to ensure efficient and effective production processes. Your primary focus will involve implementing, maintaining, and optimizing a company's MES software and processes within a manufacturing environment. Analyzes, acquires, installs, modifies, and supports operating systems, databases, utilities, and Internet/intranet-related tools. Conducts systems programming and systems support activities, such as new or revised program language codes, processing routines, and report generators. Monitors effective language codes, processing routines, hardware use, and database management techniques. Modifies maintains, and updates software, such as compilers, link editors, assemblers, OEM utilities, JCL, macros, and subroutines. Develops and reviews operator and control instructions. Prepares and conducts system and programming tests requiring hardware and software interfacing. Conducts programming tasks, including program design, coding, debugging, and documentation. As directed, prepares feasibility studies and designs tests to determine operating characteristics of software. Key Responsibilities • Develop software for monitoring shops: Collaborate with stakeholders to design, develop, and deploy shop monitoring software applications that provide real-time insights into manufacturing processes, facilitating data-driven decision-making., • Develop software to work with current MES systems to add or enhance functionality: Identify opportunities to extend the capabilities of existing MES systems through software development, ensuring seamless integration and improved functionality., • Install hardware and software: Lead the installation and configuration of hardware and software components required for MES solutions, ensuring proper setup and compatibility., • Maintain and install equipment and configurations for the MES network: Continuously monitor and maintain the MES network infrastructure, including equipment and configurations, to ensure optimal performance and reliability., • Develop and maintain secondary software for environmental data gathering and Assembly repair reports: Create and maintain specialized software applications for collecting environmental data and generating assembly repair reports, contributing to comprehensive data analysis and reporting., • Perform purchasing duties for hardware, software, and services to complete tasks/projects: Engage in procurement activities to acquire necessary hardware, software licenses, and services required for MES-related projects, ensuring timely completion., • Maintain assigned systems within MES: Regularly update and manage the designated MES systems, applying patches, upgrades, and enhancements to ensure consistent performance., • Ensure systems are running smoothly: Monitor the operational status of MES systems, proactively addressing any performance or availability issues to minimize disruptions., • Troubleshoot root causes of system issues: Investigate and diagnose the underlying causes, applying technical expertise to resolve problems and prevent recurrence., • Install hardware and software for enhancements to existing systems: Lead the implementation of hardware and software upgrades or improvements to improve the functionality and efficiency of existing MES systems., • Run reports for customers for data in assigned systems: Extract and compile data from MES systems to generate customer reports, supporting data analysis and decision-making processes., • Create procedures and documentation for the MES: Develop comprehensive procedures and document the setup, configuration, and operation of MES systems, ensuring standardization and knowledge sharing., • Train MES Technicians and Users: Provide training sessions to MES technicians and end-users, equipping them with the necessary skills to utilize MES systems effectively., • Communicate with Clients to meet the organization's needs: Maintain effective communication, understand their requirements, and align MES solutions to meet their strategic objectives., • The System Analyst III is responsible for system accuracy and stability during production: Assume responsibility for ensuring the accuracy, stability, and reliability of MES systems, especially during critical production phases, to support seamless manufacturing operations., • Design and implement Kubernetes clusters that are scalable, highly available, and secure., • Develop and maintain automation scripts for provisioning, scaling, and managing Kubernetes environments.Basic Qualifications : Bachelor's Degree or equivalent experience Minimum 5+ years’ experience in the IT field. • Ability to work overtime., • Certifications Preferred: A+, Microsoft Certifications (MCPD, MCITP, MCTS), • Proficiency with Microsoft Office, • Excellent Analytical Skills and problem-solving skills, • Good documentation skills, • Software: Vue 3.X, Java 17.X, Springboot 2.7.X, .Net Framework 4.8, NginX, Tomcat, ASP.NET, C#, • Database/OS: Maria DB and Tibero, Oracle 11g, SQL server knowledge, Application Server (Windows and Linux), RHEL 9.X., RedHat, Debian, Amazon Linux, Rocky Linux, Ubuntu., • Intermediate/Advanced proficiency in performing coding utilizing C#, ASP.net, HTML5, and WinForms, • Basic knowledge of PLC (Programmable Logical Controller), • Intermediate/Advanced knowledge of business processes related to MES., • Primary SME (Subject Matter Expert) to the assigned shop, • Strong understanding of Kubernetes architecture, API, and ecosystem tools (e.g., Helm, Kustomize)., • Proficiency in automation and scripting languages (e.g., Bash, Python)., • K8S – Kubernetes reporting knowledge is a plus Preferred Qualifications : Any Certifications below are a plus. • Certified Manufacturing Technology Professional (CMfgT): Offered by the Society of Manufacturing Engineers (SME), this certification validates proficiency in manufacturing technologies and practices. It demonstrates an understanding of critical manufacturing systems, operations, and process optimization concepts, which are highly relevant to an MES System Analyst's role., • Certified in Production and Inventory Management (CPIM): Provided by APICS (The Association for Operations Management), this certification focuses on supply chain management, including production planning, inventory control, and materials management. It can be valuable for a MES System Analyst III to work on optimizing manufacturing processes within the automotive industry., • ISA-95 Certificate Program: This certification, offered by the International Society of Automation (ISA), focuses on the ISA-95 standard, which addresses integrating enterprise and control systems. It's particularly relevant for professionals implementing MES solutions and bridging the IT and manufacturing operations gap., • Rockwell Automation MES Certification: Rockwell Automation offers a certification program focused on MES software solutions. Achieving this certification demonstrates expertise in configuring, deploying, and maintaining Rockwell Automation's MES systems, which are only used in automotive manufacturing., • Siemens SIMATIC IT MES Certification: Siemens offers a certification program for its SIMATIC IT MES solution, which covers various aspects of MES implementation, customization, and maintenance. This certification is beneficial for MES System Analysts working with Siemens MES platforms., • Oracle Manufacturing Cloud Certification: Oracle offers certifications for its cloud-based manufacturing solutions, which include MES functionalities. These certifications validate skills in implementing and managing Oracle's MES systems in automotive manufacturing., • Certified Information Systems Auditor (CISA): Offered by ISACA, the CISA certification focuses on information systems audit, control, and assurance. While not specific to MES, it can be valuable for an MES System Analyst III involved in ensuring data integrity, security, and compliance within manufacturing systems., • Project Management Professional (PMP): Offered by the Project Management Institute (PMI), the PMP certification demonstrates proficiency in project management methodologies and practices. It can benefit an MES System Analyst III leading MES implementation projects in the automotive industry., • Certified MES Professional (CmMESP): Although not as widely recognized as other certifications, some organizations and training providers offer specialized certifications in MES. These certifications focus specifically on MES concepts, technologies, and best practices., • Certifications such as Certified Kubernetes Administrator (CKA) or Certified Kubernetes Application Developer (CKAD) are highly desirable.Team Culture: Our team thrives on collaboration, innovation, and continuous learning. We foster a supportive environment where every member is encouraged to share ideas and contribute to problem-solving. We value: • Passion for Technology: We are enthusiastic about emerging technologies and their potential to transform the automotive industry., • Agility: We work in an agile environment, adapting quickly to changes and continuously improving our processes., • Teamwork: We believe in the power of teamwork and collaboration, supporting each other to achieve common goals., • Growth: We prioritize personal and professional growth, offering opportunities for learning and development., • Inclusivity: We maintain an inclusive culture where diverse perspectives are valued and everyone feels welcome. Salary Range: $79,000 to $112,959/yr. (for level III) Our Company adheres to the equal employment opportunity guidelines set forth by federal, state and local laws. The information requested on this form is sought in good faith and will not be used to discriminate against the applicant based on race, religion or creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic characteristics, marital status, sex or gender (which includes pregnancy, childbirth, or related circumstances), gender identity, gender expression, age, citizenship, sexual orientation, family care or medical leave status, military and veteran status, political affiliation, or any other characteristic protected by federal, state and local laws. Powered by JazzHR zU1fWKcoox

Job Description Who We Are South Oxford Management is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for our residents and team members alike. Our owners and leadership team brings extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. How You Will Contribute The Maintenance Technician performs technical and mechanical work to ensure that the physical aspects of the buildings, grounds, amenities, and common areas of the property meet the Company’s standards for cleanliness, appearance, safety, and overall functionality. Things You Will Do Maintenance • Perform routine work orders at the community, which may include appliance repair, completing emergency and on-call tickets., • Perform repairs and maintenance tasks across plumbing, electrical, HVAC, carpentry, and appliances., • Diagnose faults, carry out preventative maintenance, and weekly/monthly inspections., • Ensure resident service requests are completed promptly and apartments are market-ready., • Participate in on-call rotation for after-hours emergencies., • Respond to resident work orders with a customer-first attitude., • Completes the “make-ready” process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a “punch” list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Take pride in the apartment community; visually inspect and address areas of concern, keep the community clean, and make note of service needs., • Keep the Maintenance Shop stocked, organized, and clean., • Utilize maintenance management systems on computers and iPads to complete work orders. Safety • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates, broken steps, broken/burned-out exterior lights., • Think safety first and ensure that unsafe conditions are corrected promptly., • Report major repairs and needs to maintenance supervisor and property manager., • Remove and transfer of appliances, abandoned furniture, and equipment., • Schedule and perform routine preventive maintenance., • Utilize maintenance management systems to complete preventive maintenance and annual inspection Customer Service • Provide outstanding and proven customer service to residents and future residents., • Inspect and help coordinate all make-ready repairs and services., • Help your team anticipate problems that residents might have before they even occur., • Perform additional duties as assigned by the Maintenance Supervisor or Community Manager. Things You Will Need • You must have a valid driving license., • High School diploma or equivalent., • Willingness to work a flexible work week, including weekends, holidays, overtime, and on-call hours., • Sharp professional appearance., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, carry supplies., • Stand for extended periods of time., • May be required to lift to 50 pounds without assistance., • Travel up to 10% or rarely. Skills: • General knowledge of all things pertaining to property maintenance., • Skill in the safe use and maintenance of hand and power tools., • Have a steady hand, good eyesight, and dexterity when using hand tools, and machinery., • Able to multitask and meet deadlines., • Advanced knowledge in HVAC. HVAC certification preferred., • Proficient and comfortable using computers and various software programs., • Knowledgeable of pertinent laws including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferable., • South Oxford Management is proud to provide training and licensing opportunities for experienced individuals ready to take the next step. What We Will Provide You South Oxford Management provides a range of insurance options and benefits for our full-time team members. Including: • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement ($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus, • Employee Rewards and Recognition You’re exceptional. Let us make you feel it. Join our team. South Oxford Management LLC is proud to be an Equal Opportunity Employer EOE/M/F/D/V/SO. South Oxford utilizes E-Verify, a web-based system that enables enrolled employers to verify the eligibility of their employees to work in the United States through the U.S. Department of Homeland Security and the Social Security Administration, subject to state law. South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or fail to cooperate with test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant, where permitted by state law.