Trabajos production designer en San Diego, CaliforniaCrear alertas

Amazon LEO is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world. Come work at Amazon! The Role: As Senior Mixed-Signal Silicon Engineer, you will engage with an experienced cross-disciplinary staff to conceive and design innovative product solutions. You will work closely with an internal inter-disciplinary team, and third-party suppliers to drive key aspects of product definition, execution and optimization. You must be responsive, flexible and able to succeed within an open collaborative peer environment. As a member of the RFIC team, you will be responsible for the architectural definition, design, simulation, layout, and extracted simulation for transmit and receive mixed-signal circuit blocks including data converters and aspects of SERDES. Strong focus will be on creating power and cost optimized solutions for a given system performance. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. Key job responsibilities • Design & optimize high-speed (>800Msps) medium resolution (5-8 bits) DACs & ADCs and other analog/mixed-signal blocks in deeply scaled CMOS technologies., • Explore circuit architectures for power/area/performance trade-offs., • Perform circuit layout, parasitic extraction and simulation., • Collaborate with cross-functional teams to define analog/digital interface requirements and define supporting digital functions., • Specify bench and production test plans for your design and enable volume production., • Master's degree in Electrical or Communications Engineering or a related field, • 7+ years of experience in mixed-signal design, preferably in an advanced node., • Experience in taking designs to volume production., • 10+ years of experience in high-speed, low-power mixed-signal circuit design, layout and verification in the following : FinFET, SOI, BiCMOS, and Bulk CMOS technologies., • Knowledge of time-interleaved ADC architectures, digitally-assisted analog techniques., • Proficient in modeling circuits using Matlab, Verilog-A., • Knowledgeable in SERDES, data converter clock distribution design and jitter/phase noise concepts., • Proficiency with digital and mixed signal simulators, for example Incisive/Xcelium, VCS, AMS Designer., • Knowledge of the Cadence Virtuoso Design Framework, Virtuoso Schematic Editor, and Analog Design Environment (Explorer/Assembler)., • Knowledge of programming in Python, Perl, and SKILL., • Effective written and verbal communication skills Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company’s reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $143,300/year in our lowest geographic market up to $247,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

TYLin is seeking a CAD Designer to join TYLin's Bridge sector. Adhere to TYLin's production practices and the client CAD standards. Proficient in the use of AutoCAD, Revit and MicroStation in an engineering environment, specifically associated with the production of bridge structural and civil plans

Job Description Electrical Designer - Healthcare Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Healthcare facilities, with knowledge of California building codes, OSHPD/HCAI requirements, and energy efficiency standards. This role also involves collaborating with architects, project managers, and contractors to design, specify, and deliver reliable electrical systems that meet the unique needs of Healthcare environments. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a high-level technical role responsible for driving electrical project delivery and engineering quality across large and complex projects. This individual is an electrical system expert, Revit authority, and go-to mentor within the discipline. They are expected to guide project teams through all design phases, resolve complex coordination challenges, and ensure quality and consistency across documentation. The Electrical Designer serves as a bridge between technical execution and strategic planning and is expected to influence standards, coach team members, and represent the firm in advanced technical discussions with clients and consultants. Essential Functions: • Lead the production and coordination of full electrical design packages for large-scale or highly complex projects., • Standardize Revit workflows across teams and lead development of firmwide modeling resources, families, and templates., • Resolve advanced technical modeling challenges and mentor staff in efficient BIM strategies for electrical systems., • Review and approve project documentation for compliance with code, performance objectives, and client requirements., • Author and edit electrical project narratives, design briefs, and owner-facing documents with minimal oversight., • Integrate multiple complex systems across disciplines; resolve electrical system conflicts with other discipline teams., • Perform advanced electrical system analysis, including lifecycle assessments, decarbonization strategies, and code interpretations., • Lead project lighting simulation or energy modeling coordination to inform electrical system decisions., • Develop and implement firm tools for electrical load calculations, system sizing, and code compliance checking., • Define project design strategies, workflows, and milestone deliverables in collaboration with engineers and project managers., • Independently scope and plan project phases, including resourcing and delegation across disciplines and offices., • Ensure technical delivery aligns with project budgets, schedules, and quality expectations., • Provide cross-project mentorship in system design, QAQC strategies, and advanced documentation techniques., • Guide emerging designers and engineers in technical decision-making and problem-solving approaches., • Develop structured onboarding or training content for new electrical staff or designers., • Model team collaboration and delegate electrical design work strategically to grow others’ confidence and capability., • Lead technical segments of client and consultant meetings related to electrical systems, including design presentations and technical decision-making forums., • Communicate clearly and confidently about technical decisions, trade-offs, and performance metrics with diverse audiences., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Influence client and project partner expectations around technical scope, documentation quality, and system performance., • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Familiarity with California HCAI/OSHPD agency, processes and requirements preferred., • Experience with Kaiser Permanente projects preferred., • 10+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

Job Description Mechanical Designer HED is looking to add an experienced person to our Mechanical Designer team. This position will be a high-level technical role responsible for driving project delivery and engineering quality across large and complex projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This individual is a system expert, Revit authority, and go-to mentor within the studio. They are expected to guide project teams through all design phases, resolve complex coordination challenges, and ensure quality and consistency across documentation. The Mechanical Designer serves as a bridge between technical execution and strategic planning and is expected to influence standards, coach team members, and represent the firm in advanced technical discussions with clients and consultants. Essential Functions: • Lead the production and coordination of full mechanical design packages for large-scale or highly complex projects., • Standardize mechanical Revit workflows across teams and lead development of firmwide modeling resources, families, and templates., • Resolve advanced technical modeling challenges and mentor staff in efficient BIM strategies., • Review and approve project documentation for compliance with code, performance objectives, and client requirements., • Author and edit project narratives, design briefs, and owner-facing documents with minimal oversight., • Integrate multiple complex mechanical systems across disciplines; resolve multi-system conflicts with architectural and structural teams., • Perform advanced mechanical system analysis, including lifecycle assessments, decarbonization strategies, and code interpretations., • Lead project energy modeling or simulation coordination to inform system decisions., • Develop and implement firm tools for mechanical load calculations, system sizing, and code compliance checking., • Lead or co-lead BIM Execution Plan strategy and integration across project teams and external consultants., • Define project mechanical design strategies, workflows, and milestone deliverables in collaboration with engineers and project managers., • Independently scope and plan project phases for mechanical scope, including resourcing and delegation across disciplines and offices., • Ensure mechanical technical delivery aligns with project budgets, schedules, and quality expectations., • Provide cross-project mentorship in mechanical system design, QAQC strategies, and advanced documentation techniques., • Guide emerging mechanical designers and engineers in technical decision-making and problem-solving approaches., • Develop structured onboarding or training content for new mechanical staff or designers., • Model team collaboration and delegate work strategically to grow others’ confidence and capability., • Lead mechanical segments of client and consultant meetings, including system presentations and technical decision-making forums., • Communicate clearly and confidently about mechanical decisions, trade-offs, and performance metrics with diverse audiences., • Guide the team in technical response development for mechanical RFIs, field conditions, and VE proposals., • Bachelor's degree in Mechanical Engineering, or equivalent, required., • 10+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

Job Description As the Marketing Designer Intern, you will play a key role in supporting our mission to discover, inspire, and train the great problem solvers of the next generation. In this role, you will assist with the design and execution of marketing materials across various platforms, gaining hands-on experience in a collaborative environment focused on educational technology and innovation. The Marketing Designer Intern will: • Design advertising campaigns, landing pages, flyers, sales decks, and email materials based on existing design templates, • Design and implement A/B tests to optimize web pages on our marketing sites, • Gather competitive research and user data to inform design decisions, • Explain design decisions and implement feedback to improve work, • Execute web design production tasks to specification for large web projects, • Collaborate with the marketing and product teams to ensure cohesive design across all platforms, • Participate in design reviews, learning to evaluate and improve design quality, • Communicate effectively about design tasks and timelines, • An undergraduate degree in progress in Graphic Design, Visual Communications, or a related field, • A strong online portfolio that showcases your best qualities as a designer, • Experience with innovative design solutions and participation in the design process from end-to-end, • Excellent communication, collaboration, organization, and decision-making skills, • Proficiency in design software such as Adobe Creative Suite or similar tools, • Knowledge of web design principles and best practices This is a 40-hour per week paid internship with a pay rate of $30/hour. The internship will take place in summer 2026 and will be based at our headquarters in San Diego, CA. Most of our interns are with us for 10 - 12 weeks, starting in late May or early June. Here are some things you can look forward to: • Impact: Work on live campaigns and see your designs come to life across our platforms, making a tangible difference in how we reach our community, • Flexibility: Casual work environment with a hybrid work week and flexible scheduling, • Future Planning: 401K with company match, • Quality of Life: Paid Sick Leave Please note that employment is contingent on the successful completion of a background check. Work Authorization: Please note that in order to be considered for this position you must be legally authorized to work in the US. We are unable to offer sponsorship, including STEM-OPT and H-1B. About AoPS: Art of Problem Solving (AoPS) is on a mission to discover, inspire, and train the great problem solvers of the next generation. Since 2003, we have trained hundreds of thousands of the country's top students, including nearly all the members of the US International Math Olympiad team, through our online school, in-person academies, textbooks, and online learning systems. While our primary focus has been math for most of our history, through the years we have expanded our unique problem solving curriculum into more subjects, such as language arts, science, and computer science.

Job Description Job Overview We are seeking an experienced Senior Aerospace Electrical Engineer with extensive expertise in Unmanned Aerial Vehicles (UAVs) to lead and innovate within our engineering team. The ideal candidate will have a strong background in guidance systems, servo control, rugged design, design assurance, verification testing, and quality control, coupled with proven leadership and mentoring skills. This role demands hands-on technical proficiency and the ability to guide multidisciplinary teams in delivering high-performance electrical systems for aerospace applications. Key Responsibilities • System Design and Innovation: Lead the design and development of advanced electrical systems for UAVs, including guidance systems, servo control mechanisms, and power management solutions, ensuring alignment with mission-critical requirements., • Rugged Design: Oversee the development of durable electrical components and systems engineered to withstand harsh environmental conditions, including extreme temperatures, vibrations, and electromagnetic interference., • Guidance Systems: Direct the integration of sophisticated guidance and navigation systems, incorporating sensors, GPS, and inertial navigation units, to achieve precise and reliable UAV performance., • Servo Control: Spearhead the design and optimization of servo control systems for precise actuation and stabilization of UAV components, such as control surfaces, gimbals, and payloads., • Design Assurance: Establish and enforce design assurance processes to ensure compliance with aerospace standards (e.g., DO-160, DO-254, MIL-STD), driving reliability and safety in all designs., • Verification Testing: Develop and lead comprehensive verification and validation testing strategies, overseeing test execution to confirm system performance, durability, and compliance under simulated and operational conditions., • Quality Leadership: Collaborate with quality assurance teams to define and uphold rigorous quality standards, leading root cause analysis and implementing corrective actions to maintain product excellence., • Hands-On Expertise: Actively participate in prototyping, troubleshooting, and system integration, leveraging hands-on skills to resolve complex technical challenges and validate designs., • Team Leadership and Mentorship: Mentor and guide junior engineers, fostering technical growth and collaboration while leading cross-functional teams to achieve project milestones and objectives., • Education: Bachelor’s degree in Electrical Engineering, Aerospace Engineering, or a related field; Master’s degree strongly preferred., • Experience:, • Minimum of 8 years of experience in aerospace electrical engineering, with at least 5 years focused on UAV systems., • Demonstrated expertise in guidance systems, servo control, ruggedized design, and verification testing., • Proven leadership experience, including managing teams and mentoring engineers., • Technical Skills:, • Advanced proficiency in CAD tools (e.g., Altium Designer, Cadence) for circuit design and PCB layout., • Expertise in embedded systems, microcontrollers, and real-time operating systems., • In-depth knowledge of aerospace standards (e.g., DO-178C, DO-254, MIL-STD-810)., • Proficiency with test equipment, including oscilloscopes, signal analyzers, and environmental test chambers., • Leadership Skills:, • Strong ability to lead and inspire technical teams, manage projects, and drive innovation., • Excellent communication skills to collaborate with stakeholders and present complex technical information clearly., • Proven mentoring skills to develop junior engineers and foster a culture of excellence., • Soft Skills:, • Exceptional problem-solving and analytical skills with a focus on quality and precision., • Extensive experience with UAV flight control systems, autopilot integration, and sensor fusion., • Familiarity with FAA and international certification processes for UAVs., • Background in designing fault-tolerant and redundant systems for high-reliability aerospace applications.

Job Description At Carrier Johnson + Culture (CJ+C), we are fueled by creativity, curiosity, and collaboration. Our team champions a user-first approach that pushes design boundaries and fosters innovation. As an Intermediate Designer (Designer II) you'll work directly with design and technical leaders to advance CJ+Cs diverse portfolio, encompassing high-rise mixed-use residential, hospitality, civic, and public projects. If you're dedicated to shaping impactful spaces and cultivating client partnerships, join CJ+C to succeed in a dynamic, collaborative, and interdisciplinary environment. Your Role As a Project Designer at CJ+C, you'll play a key role in executing innovative design projects, drawing on your technical proficiency and imaginative perspective to propel initiatives from inception to realization. With 5-10 years of experience, you're a skilled contributor to design-focused initiatives, specializing in user-centric solutions and supporting clients in achieving their goals. Your dedication to teamwork, mentoring junior talent, and enhancing design quality positions CJ+C as the ideal setting to elevate your career within a vibrant, rewarding, and passionately curious culture. What You Will Do • Contribute significantly to projects across concept development, schematic refinement, detailed design, construction documentation, and site administration., • Offer technical and creative input, focusing on project coordination, production, and effective delivery., • Foster seamless collaboration with internal and external teams, professional consultants, and strategic partners., • Embrace an inside-out and outside-in design philosophy, contributing to iterative design processes with team members, using a wide variety of tools to communicate to the team and client, including hand sketching and 3d tools., • Partner with internal teams, consultants, and stakeholders to meet project goals., • Assist in creating persuasive proposals and interview materials to pursue new project opportunities, • Support and guide junior designers, contributing to multiple projects with high-quality outcomes while working with technical staff., • Facilitate client interactions to deliver project goals and maintain positive engagement., • Actively working towards Licensure, Registered Architect, a significant plus, • Bachelor's or master's degree in architecture from an accredited university required., • 5+ years of relevant architecture and design experience, with a strong background in diverse project typologies and scales., • Strong ability to communicate and present design concepts and their rationales., • Skilled in addressing client needs, budget constraints, architectural opportunities, or challenges impacting design concepts., • Knowledge of sustainable design principles and certifications., • Skilled in Revit, + SketchUp, Enscape, and/or other modeling software and Adobe Creative Suite., • Exceptional graphics and visualization skills to effectively convey design ideas. Final role, title, and compensation will be commensurate with the specific candidate's expertise and skill.

Job Description Position Summary The Electrical Designer is a seasoned contributor with advanced Revit expertise, proven documentation skills, and growing leadership capability. This role balances deep technical contributions with oversight responsibilities, including mentorship, QAQC, and project coordination. The Electrical Designer III operates independently on complex electrical tasks, delegates work to others, and acts as a key resource for electrical system integration and design strategy across the team. Essential Functions: • Lead the development of medium-to-large scale electrical design packages in Revit with minimal redlines or rework., • Develop and enforce Revit standards, families, and workflows for electrical modeling across teams., • Create advanced electrical system layouts and manage complex modeling tasks independently., • Oversee electrical drawing production, ensuring code compliance and graphic clarity across all documents., • Generate and review technical documentation including primarily Division 26 specifications and report narratives., • Perform and validate electrical system sizing and load calculations without oversight., • Lead cross-discipline coordination meetings and resolve system conflicts with internal and external teams., • Oversee energy code compliance and ensure documentation supports lighting and power performance verification., • Develop and apply standard electrical calculation methods and templates for internal use., • Manage portions of the project scope independently, delegating drafting or research tasks to staff., • Estimate, track, and manage hours for self-performed and delegated electrical work., • Lead electrical field surveys, construction administration responses, and RFI reviews as a primary contact., • Train and mentor team members on design practices, tools, and standards., • Delegate work strategically based on skill level and workload capacity of team members., • Lead QAQC efforts on both self-produced and delegated work, ensuring conformance to HED standards., • Provide constructive feedback and contribute to staff development through mentorship., • Act as the lead technical representative in client meetings, confidently presenting technical aspects of electrical design intent., • Document meeting outcomes and action items related to electrical systems clearly, sharing responsibility for technical coordination follow-up., • Engage in early project scoping discussions and support proposal efforts with technical narratives and fee input. Requirements • Bachelor's degree in directly related field or equivalent experience required., • 5+ years of experience in the AEC industry required., • 2+ years of experience in DSA projects required, LAUSD experience is desired., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Revit experience required., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Ability to work well with others under deadline situations required. Physical Requirements • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • Visual acuity to perform responsibilities. Work Environment • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture., • The office is a professional, open-space environment for collaborative and independent work. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. #LI-DD1

Job Description Q Microwave, a leader in the precision RF manufacturing, design and manufacture of cutting-edge military and defense microwave solutions, is seeking a PCB Layout Designer to join our entrepreneurial, collaborative, and fast-paced team located in El Cajon, CA. Q Microwave is recognized for its advanced capabilities in RF filtering and custom RF subassemblies—technologies that require deep technical knowledge and a passion for precision. Our fully vertically integrated facility in San Diego enables close collaboration between design and manufacturing, ensuring unmatched quality and performance in RF product development. As a part of Amphenol’s global network of over 130 business units, Q Microwave operates with the technical focus and agility of a specialized design center while leveraging the strength, stability, and resources of one of the world’s largest interconnect solution providers. As a PCB Layout Designer, you will play a critical role in developing cutting-edge RF and microwave subassemblies for mission-critical military and aerospace radar and communications systems. You will collaborate closely as part of a highly skilled, cross-functional engineering team—working alongside RF, mechanical, firmware, and test engineers—to design and integrate advanced digital hardware systems, including complex CCAs, flexible circuits, and custom test interfaces. Key Responsibilities: • Read, interpret, and capture electrical schematics., • Capture layouts following standard and HDI processes for board layer count from 2 to 16 with standard, blind, and buried vias and double-sided component placements., • Experience with layout of digital, analog, and power converter systems., • Manage and maintain shared component libraries, databases, and shared building block designs., • Capture new symbols and footprints, including mechanical information., • Generate manufacturing collateral, including draftsman mechanical drawings and technical specifications., • Participate in design for manufacturing (DFM) reviews., • Work closely with power electronic engineers and contract manufacturers, including international manufacturers., • Ensure processes are followed to comply with quality controls., • Setup and manage design rules and stack-ups, pad-stacks for various types of designs., • Advise on cost reduction or high-performance techniques., • Help establish new and efficient design procedures., • Provide technical guidance and mentor team members., • Utilize schematic capture and PCB layout tools (e.g., Allegro or similar) to create robust, space- and noise-optimized designs suitable for high-reliability applications., • Participate in technical design reviews and work collaboratively with cross-disciplinary teams including RF, mechanical, manufacturing, and quality engineering., • Support risk management efforts by identifying electrical design risks and developing mitigation strategies. Minimum: • In-depth knowledge of the PCB design process., • Associate or bachelor's degree in a technical field (eg. Electrical Engineering, Computer Science, Drafting), • 3+ years of experience in using Allegro[preferred], Altium, EAGLE, or similar PCB layout software. Including in-depth knowledge of working with a database, net classes, high voltage rules, variants, and job files., • Experience in working collaboratively with electrical engineering defining PCB design., • Knowledge of signal integrity, power distribution, and noise mitigation best practices in high-speed digital designs is a plus., • Proficient in basic office tools including Microsoft Office (Excel, Word, PowerPoint) and email platforms, • This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a “US Person” under US export laws (or eligible for approval under a U.S. Government export license)., • Five (5) to Eight (8+) years experience., • Active Security Clearance., • Familiarity with component selection for high-reliability/aerospace/defense applications., • Hands-on experience with digital and mixed-signal simulation tools (e.g., SPICE-based simulators)., • Ability to lift 25–50 lbs. of test equipment with assistance., • Fast-paced environment with frequent interaction with supervisors., • Work in a collaborative environment with growth opportunities., • Be part of a supportive team focused on quality and efficiency., • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off This position is an excellent opportunity for motivated individuals who are ready to take the next step in their careers in manufacturing and production. Applicants must be U.S. citizens. Q Microwave is an Equal Opportunity Employer. Ready to take the next step in your career? Apply today!

Job Description Electrical Designer - Mission Critical Our Electrical Engineering team is looking to add an experienced team member to our group of talented engineers. The person filling this position will be responsible for the design and technical systems for large, complex projects from schematics through construction administration. The ideal candidate will bring a strong background in the design and construction of Mission Critical (Data centers) facilities. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary The Electrical Designer is a seasoned contributor with advanced Revit expertise, proven documentation skills, and growing leadership capability. This role balances deep technical contributions with oversight responsibilities, including mentorship, QAQC, and project coordination. The Electrical Designer operates independently on complex electrical tasks, delegates work to others, and acts as a key resource for electrical system integration and design strategy across the team. Essential Functions: • Lead the development of medium-to-large scale electrical design packages in Revit with minimal redlines or rework., • Develop and enforce Revit standards, families, and workflows for electrical modeling across teams., • Create advanced electrical system layouts and manage complex modeling tasks independently., • Oversee electrical drawing production, ensuring code compliance and graphic clarity across all documents., • Generate and review technical documentation including primarily Division 26 specifications and report narratives., • Perform and validate electrical system sizing and load calculations without oversight., • Lead cross-discipline coordination meetings and resolve system conflicts with internal and external teams., • Oversee energy code compliance and ensure documentation supports lighting and power performance verification., • Develop and apply standard electrical calculation methods and templates for internal use., • Manage portions of the project scope independently, delegating drafting or research tasks to staff., • Estimate, track, and manage hours for self-performed and delegated electrical work., • Lead/oversee construction administrative duties as needed for assigned projects including, but not limited to: bid review, plan review comment responses, RFI responses, submittal reviews, field observations, punch list and owner pay application progress reviews., • Train and mentor team members on design practices, tools, and standards., • Delegate work strategically based on skill level and workload capacity of team members., • Lead QAQC efforts on both self-produced and delegated work, ensuring conformance to HED standards., • Provide constructive feedback and contribute to staff development through mentorship., • Act as the lead technical representative in client meetings, confidently presenting technical aspects of electrical design intent., • Document meeting outcomes and action items related to electrical systems clearly, sharing responsibility for technical coordination follow-up., • Engage in early project scoping discussions and support proposal efforts with technical narratives and fee input., • Bachelor's degree in directly related field or equivalent experience required., • Professional licensure preferred., • Experience with large power infrastructure projects preferred., • Experience with hyperscale data center projects preferred., • Revit experience required., • 5+ years of experience in the AEC industry preferred., • Written and verbal communication skills commensurate with the position required., • Strong organizational skills preferred., • Experience with computers, specifically for word processing, spreadsheet use/creation and email required., • Detail-oriented, self-motivated, enthusiastic, flexible and curious personalities required., • Must be able to navigate active construction sites including climbing ladders to observe existing conditions and construction progress., • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person., • We embrace a hybrid model that promotes both autonomy and collaboration, including the freedom to work from home, with regular in-office days to connect with teammates and build culture.

Job DescriptionCivil Engineering Designer (a Mid-Level Engineer role) will work on various land development projects. Under the supervision of Project Managers, this person will perform engineering analysis and design on small to medium sized projects and tasks. The Civil Engineering Designer must have the following qualifications: • B.S. Degree in Civil Engineering (Must be in Civil Engineering), • 2+ years of civil design experience (this can be from internships, co-op programs, or paid work experience), • Proficient written and verbal communication skills, • Ability to work well in a team-oriented environment, • Heavy experience with AutoCAD Civil 3D, • Experience with other drainage and stormwater programs such as SDHM and Civil D is preferredResponsibilities include (but are not limited to):, • Preparation of lot layouts, preliminary grading plans, and tentative parcel maps, • Preparation of grading and improvement plans under the supervision of Project Managers, • Assists Project Managers with grading design, road elevation design, and sewer and water layout, • High production drafting using AutoCAD Civil 3D

Job Description Hazen and Sawyer is seeking a CAD/BIM Designer to work alongside project managers and engineers to produce structural BIM (Revit) models, families, and contract drawings for the structural discipline. The ideal candidate will be proficient in the use of Autodesk Revit with experience in the creation of models, families and contract drawings. The candidate will have experience leading the model and contract drawing development effort for projects, including performing interdisciplinary clash detection and the reconciliation of conflicts as well as ensuring that standards are adhered to. AutoCAD/Civil 3D proficiency would be of benefit. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • Developing Revit models, families, and contract documents, • Coordinating contract drawing development with multiple disciplines, • Performing BIM model clash detection and working with various disciplines to resolve conflicts, • Training/mentoring less experienced designers, • Reviewing models and drawings for less experienced designers, • Relevant bachelor’s degree and 6 to 10 years of experience — or an associate degree/technical certification and 6 to 10 years of experience., • Proficiency in Autodesk Revit, • Proficiency in AutoCAD/Civil 3D would be a benefit, • Experience leading and coordinating drawing production for medium and large sized projects. What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description As a Senior Designer, you serve a critical role in leading the project design efforts. You must understand a project's complex parameters and transform them into a clear and comprehensive solution. You must effectively apply a combination of strong communication skills (graphic and verbal), creativity, and the ability to problem-solve to achieve the project design goals and objectives. As a Senior Designer, you must interact directly and effectively with design principals, directors, clients, and other project team members. You must possess a high-level understanding of design-related code and safety requirements, as well as have a strong understanding of building systems, materials, and construction techniques. PRIMARY RESPONSIBILITIES: BUSINESS DEVELOPMENT/ MARKETING • Support Business Development and Marketing with specific components of RFQ/RFP as required, • In collaboration with Marketing, prepare presentations for project pursuits as required, • Participate in project interviews as required, • Develop site capacity studies and/or design documents as required, • Attendance at industry events (i.e., conferences, workshops, seminars) PROJECT SET-UP • Set up project directory within F Drive, • In collaboration with the Project Manager, file all critical project correspondence within project filing system, • Support the Project Architect to establish Revit model based on templates and project specific requirements PROGRAMMING/ENTITLEMENT THROUGH JURISDICTIONAL APPROVALS • Lead the design efforts of one or more project designs (contingent on size and complexity of project) from commencement through jurisdictional approval., • Communicate design staff and project schedule requirements to Directors & Principals, • Establish design concepts and criteria with Design Directors & Principals, • Communicate design concepts and criteria to supporting design team members, • Responsible for design-related tasks such as:, • Programming or site studies, as required, • Space Planning, • Architectural Development (Interior & Exterior), • Prepare design documents such as Site Plans, Floor Plans, Sections, Elevations, and 3D Perspectives utilizing design software, including:, • SketchUp, • Revit, • AutoCAD, • Adobe Suite, • Rendering software (Enscape or Twin Motion), • AI Engines, • Energy Modeling Software & Plugins, • Prepare and as required, deliver design presentations, • Supervise design drawings produced by Project Designers, Designers and Emerging Professionals, • Coordinate building design with consultants, as required, • Collaborate with and support the Project Manager with design related requirements of the adjacency having jurisdiction, • Collaborate with Interior designers, • Meet project deadlines and schedules, • Design to the project budget requirements, and propose alternatives as required, • Coordinate design intent with production team BIDDING/CONTRUCTION ADMINISTRATION/CLOSE-OUT • Support Construction Administrator as required ADMINSTRATIVE • Provide guidance and mentorship to junior team members, • Continued development of presentation and public speaking skills REQUIREMENTS: • 10–20 years in an architectural firm, • Bachelor’s or Master’s degree in Architecture from an accredited program, • Focus on high-density housing (student housing and senior living experience strongly preferred; single-family residential experience not applicable), • DSA experience a plus, • California Architect license preferred but not required PHYSICAL STANDARDS: Positions in this class are situated in a standard office environment, resulting in little exposure to the weather and requiring no unusual physical abilities. Other requirements include: • Near and visual acuity to interpret written documentation, reading very small print, maintains accurate records, recognize people and provide direction., • Use of hands for simple and firm grasping, as well as, fine manipulating ability to reach and handle equipment, records, and reports., • Higher-level cognitive skills to move quickly from one task to another and to attend to detail. Able to concentrate and set priorities despite distractions., • Speaking and hearing skills to converse verbally by telephone, in writing, and in person in an appropriate fashion, to ensure customers and employees are properly addressed in a precise manner., • Ability to travel as needed for client presentations, conferences, or business development meetings. **We offer a competitive salary and benefits package that offers: Medical, Dental, Vision, Life, Short- and Long-Term Disability Insurance, 401(k), along with paid Vacation and paid Holidays Recruiters, please do not contact this job poster.

Job Description POSITION SUMMARY: HPI Architecture is seeking a talented Marketing Graphic Designer to support all marketing efforts for the firm’s Education and Housing Studios. PRIMARY RESPONSIBILITIES: Overall Marketing Coordination and Assistance: • Support the Marketing / Communications Manager and HPI Leadership team throughout all phases of the marketing and business development process including:, • Creating engaging, brand-aligned content including graphics, copy, and electronic media supporting all marketing and business development efforts, • Coordinating the production of collateral and marketing materials for RFP / RFQ submissions, industry events, conferences, trade shows, and career fairs under the direction of the Marketing and Communications Manager, • Assisting with additional marketing and business development tasks as assigned. KNOWLEDGE, SKILLS and ABILITIES • Creative thinker with the ability to develop innovative ideas and visual solutions., • Strong graphic design skills with the ability to translate strategic direction into effective design concepts. (Portfolio required with application.), • Proficient in Adobe Creative Suite, including InDesign, Illustrator, Photoshop, and Premiere Pro., • Experience creating social media content (LinkedIn, Instagram, YouTube) with an understanding of professional and corporate tone., • Excellent written and verbal communication skills., • Highly organized and detail-oriented, with strong problem-solving and critical-thinking abilities., • Able to manage multiple projects, meet frequent deadlines, and adapt to shifting priorities., • Self-motivated and capable of working both independently and collaboratively in a decentralized team environment., • Software proficiencies: Adobe Creative Suite, Bluebeam Studio, and Microsoft Office (Word, Excel, PowerPoint, and Outlook) required, • 1-3 years of related marketing experience in the A/E/C industry (architecture, engineering, or construction firm) preferred, • Experience with the A/E/C RFP/RFQ proposal process preferred, • Relevant four-year degree in Marketing, Communications, and/or Graphic Design preferred, • Occasional travel to both offices (Newport Beach and San Diego) for various industry events PHYSICAL STANDARDS: Positions in this class are situated in a standard office environment, resulting in little exposure to the weather and requiring no unusual physical abilities. Other requirements include: • Near and visual acuity to interpret written documentation, reading very small print, maintains accurate records, recognizes people and provide direction., • Use of hands for simple and firm grasping, as well as, fine manipulating ability to reach and handle equipment, records, and reports., • Higher-level cognitive skills to move quickly from one task to another and to attend to detail. Able to concentrate and set priorities despite distractions., • Speaking and hearing skills to converse verbally by telephone, in writing, and in person in an appropriate fashion, to ensure customers and employees are properly addressed in a precise manner. **We offer a competitive salary and benefits package that offers: Medical, Dental, Vision, Life, Short- and Long-Term Disability Insurance, 401(k), along with paid Vacation and paid Holidays Recruiters, please do not contact this job poster.

Job Description At Carrier Johnson + Culture (CJ+C), we are fueled by creativity, curiosity, and collaboration. Our team champions a user-first approach that pushes design boundaries and fosters innovation. As a Designer, you'll work directly with design and technical leaders to advance CJ+Cs diverse portfolio spanning high-rise mixed-use residential, hospitality, civic, and public projects. If you're dedicated to shaping impactful spaces and cultivating client partnerships, join CJ+C to thrive in a dynamic, interdisciplinary, and design-driven environment. Your Role As a Designer at CJ+C, you will contribute to the creation and realization of thoughtful, high-quality architecture. Depending on your experience level, you may assist with or lead elements of the design and documentation process from conceptual design through construction. You bring curiosity, technical skill, and design sensibility to every project, helping our teams deliver innovative and meaningful results. You are passionate about collaboration, eager to grow, and committed to advancing design excellence in a supportive and creative culture. What You Will Do • Participate in all project phases, including conceptual and schematic design, design development, construction documentation, and construction administration., • Collaborate with project teams on design concepts, presentations, coordination, and production., • Contribute to creative problem-solving, addressing complex design challenges with innovative and practical solutions., • Work closely with clients, consultants, contractors, fabricators, and regulatory agencies to achieve project goals., • Prepare graphic presentations, renderings, and construction drawings using a range of digital and hand-drawing tools., • Assist with or lead project coordination and communication across teams and disciplines., • Support client engagement, proposal development, and project presentations., • Mentor junior team members or, if early in your career, learn from senior designers and technical leaders., • Bachelor's or master's degree in architecture from an accredited institution., • 1 - 10 years of relevant architecture and design experience., • Actively pursuing architectural licensure or licensed; LEED accreditation a plus., • Proficient in Revit, SketchUp, Enscape, and/or other 3D modeling tools such as Rhino., • Skilled in Adobe Creative Suite (Illustrator, Photoshop, InDesign) for design communication and presentations., • Strong ability to communicate and present design concepts and their rationales., • Familiarity with building codes, accessibility standards, and sustainable design principles., • Excellent communication and collaboration skills with clients, consultants, and colleagues. To be considered, please provide a current portfolio and/or work samples in PDF format. Final title, role, and compensation will be commensurate with experience and demonstrated skills.