Production designer jobs in West Covina, CaliforniaCreate job alerts

Job Description HOURLY JOB OPPORTUNITY FORM Position Custom Sample Tufting Operator A Department Custom Samples Reports To Manager Post Start Post End Shift Posting No. ESSENTIAL JOB DUTIES Set up and make adjustments to tufting machines and replace needles, loopers and knives. While machine is running, inspect carpet quality and defects such as breaks, pull-downs, low lines. Program patterns in computer. Splice in next order to specifications. Confirm pattern and machine set-up to specification. Record or make changes to setup from original specification when needed under direction of designer, lead or Manager for aesthetic or quality reasons. Identify sample with correct PDS#. Notify Spec coordinator when called for. Load yarns on creel or in yarn tubes as necessary. Interact with our Designers to make adjustments to the machine for quality and design approval. Housekeeping , Other duties needed to maintain department levels of production. EXPERIENCE OR REQUIREMENTS • Six months experience as a mender ., • 5 years experience as a Tufting Machine Operator or the equivalent experience on machines: #4 , #3 ,#25 , #20 , #32, #27, #41, #52, • Knowledge of carpet quality standards., • Communication skills to read, write, understand and discuss (in English), • Understand numerical and alphabetical lot numbers. Frequent: Handle, manual dexterity, lifts 15-20 lbs., reach, stand, stoop, and walk. Use personal protective equipment. Occasional: Balance, climb, crawl, crouch, grasp, hear, kneel, and speak. Required: Close vision, color and depth perception. ENVIRONMENTAL CONDITIONS General warehouse environment. Background noise, dirt, oil, humidity, temperature variations. Work near moving mechanical parts Bentley Mills provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. *The “base salary range” provided above is a good faith estimate of what we expect to pay for this position. The range provided is required by California State Law. Bentley Mills reserves the right to pay outside of the given range based on a variety of factors including but not limited to: candidate skills and experience, complexity of the job, budgetary factors, and local/geography. Bentley Mills conducts regular reviews of compensation ranges and therefore reserves the right to alter this range at any given time.

Job Description Sunny Health & Fitness is an industry leading health and exercise-centric lifestyle brand that is dedicated to cultivating and empowering those within the fitness community. We believe fitness should be accessible to everyone, anywhere, anytime. Our goal is to enable and provide you with the tools you need to become better through a fulfilling fitness experience and lifestyle. Essential Duties and Responsibilities: • Work on a full life cycle of product (order placement, production scheduling, meeting cancel dates, import and QA)., • Work closely with QC team to inspect merchandise upon receipt and point out imperfections or incorrect design of items., • Ensure complete technical information for new items which may include testing, taking images, weighing and measuring item and data entry to software., • Manage production flow through use of email and spreadsheets., • Resolve production and development issues with agents and designer including schedule, pricing, quality, packaging and esthetic issues., • Communicating with overseas office, vendors and factories, • Communicate daily with overseas offices and vendors to track development and production statuses, • Quality Control and Tracking Orders from pre-production, samples, and final production., • Bachelor’s degree preferred or equivalent experience, • 2+ years of relevant experience in a similar role, • Ability to work as part of a team, • Good analytical skills and ability to prioritize in the face of multiple task, • Excellent time management skills to ensure efficiency in service delivery, • Good interpersonal skills and communication with all levels of management, • Ability to physically stand, bend, squat, and lift up to 25-30 lbs GUNesfDLEs

Job DescriptionDue to involvement with sensitive US government information, US citizenship is required. Take your career to new heights. Come join us at MORI Associates and help us support the most exciting projects at NASA. As an ELECTRICAL DESIGN DRAFTER, you will be part of a dedicated team of diverse professionals creating and supporting cutting-edge solutions for our client’s critical missions. MORI is a mid-sized nationwide company founded in 1997 with the ideals that creating an agile organization full of innovative and passionate people will progress science and technology for all life on earth. We focus on offering a complete range of services from strategic consulting to the development of Information Systems and providing advanced engineering solutions. Now, let’s see if this opportunity is the right challenge for you. Position Summary: ELECTRICAL DESIGN DRAFTER shall be of service to a multi-discipline engineering organization within the Facilities Engineering department for NASA’s Deep Space Network. He or she should possess excellent knowledge of the use of AutoCAD software. The electrical designer creates detailed plans and drawings for electrical systems in large antennas and buildings, ensuring they are safe, efficient, and meet NEC codes (like power, lighting, fire alarms, and low-voltage systems), as well as medium voltage switchgear. They are expected to collaborate with design engineers, handling everything from load calculations and component specification to installation support and site visits. The Electrical Designer shall possess a working knowledge and familiarity with 120/ 240/ and 480V power distribution systems; development and preparation of single-line diagrams, schematic and wiring diagrams, lighting schedules; and possess the technical capability of selecting low and medium voltage power distribution equipment and components. Assignments may require the use of mathematical formulas for load calculations, proper wire sizing, conduit fill, dimensions, and bill of material quantities. In most cases the designer will work from hand-drawn or computer sketches, red-marked drawings or other models, design specifications, and written or verbal information supplied by an engineer. The Facilities Engineering team works together from concept to completion to create original drawings as well as modify existing drawings to produce As-Built installations. Prefer candidate able to work onsite as needed at Monrovia DSN facility. Likely one day/week. MINIMUM QUALIFICATIONS: Education: AA/AS degree in a technical or engineering field (or extra experience in lieu of degree) with 3-5 years of drafting experience with emphasis on design drawing of electrical schematics and electro-mechanical sub-assemblies. Experience The DSN Electrical Design Drafter shall have a minimum of 5 years’ experience in the production of AutoCAD drawing packages and shall have working knowledge of a current AutoCAD software release (version 2022 or newer preferred). Comp. Range: 75K to 90K MORI Associates is an EEO/AA/Disability/Vets Employer and complies with E-Verify. Powered by JazzHR Compensation details: 75000-90000 Yearly Salary PIa5d48e29baa6-25405-37635272

Job DescriptionAbout Us We are a U.S.-based manufacturing company designing and producing duty gear and hard goods for law enforcement and professional use. We are looking for an experienced SolidWorks 3D CAD Designer to support product development from concept through prototype and production. Responsibilities • Create accurate 3D models and assemblies using SolidWorks, • Convert hand sketches, concepts, or existing samples into production-ready CAD files, • Generate 2D drawings with proper dimensions, tolerances, and notes, • Design for manufacturability (CNC, injection molding, stamping, textile hardware, etc.), • Revise designs based on testing, feedback, and engineering changes, • Prepare files for prototyping and vendor production Requirements • Proven experience using SolidWorks, • Strong understanding of mechanical design and manufacturing processes, • Experience creating:, • Parts and assemblies, • Technical drawings, • Exploded views (a plus), • Ability to work independently and meet deadlines, • Clear communication and responsiveness Preferred (Nice to Have) • Experience with consumer products, tactical gear, or metal/plastic components, • Knowledge of GD&T, • Experience working with overseas or U.S. manufacturers, • Familiarity with prototyping and testing cycles Compensation • Competitive hourly or per-project rate, based on experience, • Ongoing work available for the right candidate How to Apply Please submit: • Resume or brief work history, • Portfolio or sample SolidWorks work (required), • Your hourly or project-based rate, • Availability per week

Job Description Position Summary We are seeking an experienced Electrical Engineer with expertise in Power Electronics and Motor Control Systems to lead the design, analysis, and validation of electronic control assemblies for Brushless DC and induction motors. This role is critical to the advancement of next-generation aircraft cargo handling and actuation systems within our Aerospace programs. What you will be doing: • Technical lead for electronic circuit development, working cross-functionally with systems engineering, mechanical design, embedded software, manufacturing, and external certification to deliver compliant, robust, and manufacturable solutions, • Lead development of electronic system architectures and detailed circuit designs in accordance with customer requirements, RTCA/DO-160, MIL-STD, and internal design standards, • Generate and maintain system specifications, detailed schematics, design analyses, and circuit justification reports to support design reviews, compliance audits, and airworthiness certification, • Develop and execute qualification, functional, and environmental test plans to verify design integrity and compliance, • Perform hardware/software integration, functional verification, and troubleshooting across prototype and production configurations, • Design for both low- and high-voltage aerospace applications, including 28 VDC, 270 VDC, and 115V–400Hz AC systems, • Apply deep knowledge of power stage design, gate drivers, protection circuitry, and motor control theory, including sensorless and Hall-effect-based commutation strategies, • Support thermal management and packaging solutions to meet harsh environmental conditions and mission duration requirements, • Utilize electronic design tools: Altium Designer, PSPICE, and MATLAB/Simulink for schematic capture, simulation, and analysis, • Collaborate with embedded software developers and system engineers to define control interfaces, communication protocols (CAN bus, RS-485), and diagnostics, • Ensure compliance with IPC-A-610 Class 3 and other aerospace quality and workmanship standards, • 10+ years' hands-on electronics design and validation, ideally within an AS9100 environment, • Bachelor's Degree, Electrical Engineering (emphasis on Power Electronics preferred); Master's Degree with defense/aerospace experience a plus, • Expertise in motor drive design, including control of BLDC and/or induction motors for aerospace or defense application, • Proven experience supporting product certification, compliance testing, and technical documentation in regulated industries, • Strong analytical and problem-solving skills; ability to lead root cause investigations and implement effective corrective actions, • Proficiency with PSPICE, Altium Designer, MATLAB, LabVIEW, or equivalent tools, • Familiarity with embedded firmware (C/C++) and DSP/FPGA integration is preferred, • Knowledge of EMI/EMC mitigation strategies and aerospace standards (DO-160, MIL-STD-461, -704, -1275), • Willingness to travel occasionally to support program reviews, testing, and supplier integration activities, • Competitive salary, • Excellent benefits, • Matching 401k plan, • Tuition reimbursement, • Work for an established and growing company with an entrepreneurial spirit!

Job DescriptionAt Hot Topic, we’re passionate about creativity and high performance. We're also passionate about Pop Culture...in case you hadn't noticed. We are looking for a Technical Designer to join our team ensure our garments have consistent and amazing fit. WHAT YOU'LL DO: • Manage the technical product development process for a portion of, or an assigned product classification; working with Merchants, and Design Teams to establish the direction of the fit and garment details., • Create grading specs and garment measurements; developing and/or correcting patterns when necessary., • Track fit approval and sample process; organize fit samples received, including logging received samples and scheduling fitting; maintain Time & Action (T&A) sample log sheet., • Create fit comments; note all design and specs discrepancies prior to fittings; review all fit samples against design package to ensure all specifications and design details are adhered to., • Communicate daily with vendors, Merchants, Design, and Production teams for T&A and product execution., • Ensure that all company fit standards are upheld. WHAT YOU'LL NEED:, • 4-year college degree in fashion merchandising/design preferred with a minimum of 4 years in technical design., • Previous retail or garment manufacturing experience preferred., • Strong computer skills, including Adobe Illustrator, MS Word, and Excel., • Basic understanding of fit, balance, and garment construction, fabrics, and fabric performance.

Job Description Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 150 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate opening for a Mechanical Assembler located in City of Industry, California. This position is temporary with the opportunity for permanent employment. Job Summary: The Mechanical Assembler is responsible for assembling the mechanical components of Astrophysics x-ray security machines. This role involves using handheld tools to fasten and connect parts, including large panels, while maintaining quality and safety standards. Assemblers work in a team, each completing specific tasks to build units that are utilized globally. Essential Functions: • Assemble mechanical components of x-ray machines following manufacturing plans, drawings and instructions, • Use handheld tools to fasten, screw, and drill parts accurately, • Connect large panels and other components securely to machines as required, • High School Diploma or GED, • Excellent medical, dental and vision benefits, • 401K plan with 4% employer match, • 11 paid holidays, 10 PTO days Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call 1(909) 598-5488 and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Powered by ExactHire:179135

Job Description Astrophysics Inc. is a leading global designer and manufacturer of X-Ray security inspection systems. Since 2002, we have dedicated ourselves to ensuring a safer world through advanced X-Ray screening and imaging technology. Our systems are deployed in critical infrastructure, aviation, and ports and borders sites in more than 150 countries. Hotels, prisons, courthouses, embassies, airports, military bases, and government buildings around the world depend on us for their safety and security. Astrophysics is an expanding, dynamic and fast-paced company looking for individuals who want to grow with us and be a part of a meaningful security mission. We currently have an immediate opening for an Electrical Assembler located in City of Industry, California. This position is temporary with the opportunity for permanent employment. Job Summary: The Electrical Assembler is responsible for assembling the electrical components of Astrophysics x-ray machines according to technical drawings and assembly instructions. This role involves precise handling of parts, use of hand tools, and maintaining safety and quality standards. Assemblers work as part of a team, each completing specific tasks to meet production goals. Essential Functions: • Assemble electrical components using technical drawings and instructions, • Dismantle, adjust, and assemble equipment according to plans, manuals, or drawings, • Use hand tools (e.g., screwdrivers, pliers, wire strippers) to complete assembly tasks, • Align, fit, and secure components to meet exact specifications, • Collaborate with team members to ensure efficient workflow and production targets are met, • Identify and resolve problems in a timely manner, • 6 months to 1 year experience in electrical assembly; or, • Associate’s Degree in Electronics, Electrical, or a related field, • Strong wiring and mechanical skills preferred, • Excellent medical, dental and vision benefits, • 401K plan with 4% employer match, • 11 paid holidays, 10 PTO days Equal Opportunity Employer Astrophysics Inc. provides equal employment and advancement opportunities to all individuals. Employment decisions at Astrophysics Inc. are based on merit, qualifications and abilities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity national origin or protected veteran status and will not be discriminated against on the basis of disability. If you need assistance or an accommodation while seeking employment, please call 1(909) 598-5488 and ask for Human Resources. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. Powered by ExactHire:179133

Job Description Sunny Health & Fitness: We are looking for an experienced Production/Procurement Specialist to manage all aspect of logistics throughout our supply chain. The individual will be responsible for organizing and providing efficient solutions for the entire lifecycle of our products. The ideal candidate should be detail oriented and have strong negotiation skills. Schedule: Monday-Friday 8:30 AM-5:30 PM (1 hour unpaid lunch) Essential Duties and Responsibilities: • Work on a full life cycle of product (order placement, production scheduling, import and QA)., • Coordinate and communicate with forwarder, brokers, and truckers for freight related issues., • Work closely with other teams to inspect merchandise upon receipt and point out imperfections or incorrect design of items., • Ensure complete technical information for new items which may include taking photos, weighing, and measuring item and data entry to software., • Manage production flow through use of email and spreadsheets., • Resolve production and development issues with agents and designer including scheduling, pricing, quality checking and packaging., • Booking import shipments/ back-up receiving inventory., • Bachelor’s Degree, • 4+ years of experience in related fields, • Bilingual in Mandarin (PREFERRED), • Excellent communication and negotiation skills, • Proficient in Microsoft Office and logistics software, • Must be able to work in a fast-paced environment with quick and accurate results Wltd0UZn4T

Job DescriptionWe're looking for a Textile Designer/Graphic Artist for Handbags & Accessories to bring our Pop Culture designs to life through our product. This role will design original print repeats and artwork by collaborating with the Handbag & Accessories Design and Product Development Teams for Hot Topic, Box Lunch & Her Universe Merch. This role operates on a hybrid schedule and will require to work from our HQ located in the City of Industry, CA three days a week.WHAT YOU'LL DO • Create original artwork for handbags and wallets – Licensed and Non licensed for all brands from the direction of our design team, • Produce print repeats from final artwork; editing, recoloring and matching color to pantone standards, • Utilize licensed assets creatively while adhering to licensor rules and guidelines, • Use Photoshop and Illustrator to prepare, modify, and resize artwork; collaborating with product development and design team to articulates printing and design techniques to factories., • Create licensed and original non licensed artworks for each delivery, • Partner with the HT Inc DTR Apparel Art teams as needed, • Manage Strike off/PP art approvals and comments to PD with design, • Create and revise Art specification pages for submission to the licensor for approvals of collections, • Create and present print concepts/moodboards in collaboration with our design team and buyersWHAT YOU'LL NEED, • Certification or education in graphic arts or illustration required., • 3-4 years of graphic design/illustration work experience in a wholesale/vertical business, preferably in accessories, handbags/backpacks, and other non-apparel categories, • Proficient in Illustrator and Photoshop, • General knowledge of construction and all creative techniques in relation to handbags/wallets a plus, • Highly organized, detail-oriented, strong time management skills, and excellent communication skills – both written and verbal, • Meets deadlines, ability to manage multiple projects simultaneously, anticipates change, and maintains composure under pressure, • Passion and knowledge of pop culture and the licenses that Hot Topic, BoxLunch, and Her Universe have, • Team player – ability to adapt to a fast-paced, ever-changing environment

Job DescriptionBenefits: • Bonus based on performance, • Competitive salary Benefits/Perks: • Competitive Pay, • Paid Vacation and Holiday, • Performance Bonus, • Ongoing Training Opportunities A Successful FASTSIGNS Sign Production Specialist Will: PRODUCTION: • Graphic Application: Follow layouts to apply computer-cut vinyl or full-color graphics to specified substrates., • Substrate Preparation: Prepare surfaces for vinyl application by cutting, painting, laminating, and cleaning., • Vinyl Weeding: Remove excess vinyl from cut images, adjusting techniques for different sizes, types, and complexities., • Printer Operation: Operate and maintain printers., • Quality Assurance: Conduct pre- and post-production quality checks by interpreting work orders and proofing for errors., • Finishing: Laminate and mount printed materials as needed., • Inventory Management: Report inventory levels and reorder needs to the manager., • Storage Maintenance: Clean and upkeep storage areas.GRAPHIC DESIGN:, • Create Graphics and Outputs: Design and produce full-color graphics or vinyl products that can be printed, mounted, or applied to substrates., • Complete/Modify Designs: Work with customer drawings and files to complete or modify designs for media output., • Design Layouts: Arrange the size and position of images and text, choose styles and fonts, and create layouts based on space, design aesthetics, and production needs., • Quality Control: Verify job accuracy before output. Ensure material and device settings are correct for each job., • Manage Logo Library: Maintain and convert customer logo files as needed.Ideal Qualifications for FASTSIGNS Sign Production Specialist / Graphic Designer:, • 1-2 years of experience in sign production or graphic design preferred, • High school diploma or equivalent, • Ability to stand for long periods of time (4 hours or more), • Ability to lift 50 or more pounds, • Flexibility to lean over a waist-high table and use back and forth hand motion to apply vinyl letters and graphics to a substrate, • Ability to work under pressure to output high volume, high-quality work, • Ability to use light power equipment Do you enjoy working with people? Do you enjoy helping people solve problems by offering advice and consultation? Are you looking for a job that offers constant learning, skills growth and a career path? If so, we are looking for employees just like you in the ever-changing Sign Industry. Apply today!

Ideal Qualifications for FASTSIGNS Sign Production/Graphic Designer Specialist:. A Successful FASTSIGNS Sign Production Specialist/Graphic Designer Will:.