Trabajos structural en Austin, Texas - Page 5Crear alertas

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. We are seeking a highly skilled Load & Dynamics Engineer to join our team working on cutting-edge autonomous surface vessels (ASVs) for the Department of Defense (DoD). As a Load & Dynamics Engineer, you will be responsible for modeling and analyzing the forces acting on our autonomous vessels, ensuring they meet operational requirements for performance and safety. You will play a key role in simulating vehicle behavior, designing load response models, and ensuring hardware is validated for real-world environments. This is an interdisciplinary role requiring understanding of dynamics, structural integrity, and system performance. Responsibilities • Analyze and resolve dynamic load-related problems affecting autonomous surface vessels, utilizing a combination of analysis, simulation, and field data., • Develop finite element models and lumped element models to simulate vessel response under various load conditions (e.g., waves, wind, operational stress)., • Perform dynamic testing from start to finish, including pre-test analysis, sensor selection and installation, test execution, data analysis, signal processing, and model validation., • Own system-level dynamic analysis and recommend hardware or design changes across engineering teams to enhance vessel performance under dynamic conditions., • Collaborate with cross-functional teams to assess and refine vehicle design for load-bearing capability, ensuring it meets stringent operational and defense standards., • Conduct advanced simulations to predict the behavior of autonomous vessels in complex environments (e.g., turbulent water, harsh weather, operational maneuvers)., • Write and modify software to support dynamic modeling, simulation, and analysis in commercial and in-house software platforms. Qualifications, • Bachelor’s degree or greater in Mathematics, Physics, Mechanical Engineering, Structural Engineering, Naval Architecture, or a related field., • 2+ years of professional experience with dynamics, particularly in structural or fluid dynamics, with a focus on vehicle response to external forces., • Strong experience with dynamic simulation and load analysis using industry-standard tools., • Proven ability to conduct testing and data analysis to assess load dynamics in complex systems., • Proficiency with software tools like MATLAB, Python, and commercial finite element modeling tools (e.g., NASTRAN)., • Hands-on experience with both dynamic analysis and hardware testing., • Experience in the modeling of fluid-structure interaction, particularly in maritime environments., • Knowledge of naval architecture and experience with hull, propulsion, and stability dynamics., • Expertise in vibration, shock, and fatigue testing as it applies to large-scale marine or autonomous systems., • Familiarity with control systems and integration of autonomous technologies within physical vessel systems., • Experience working in defense-related industries, particularly with DoD contractors or government programs.

Job Description Project Manager - Architectural Design Austin, Texas, Dallas, Texas or Houston, Texas Claycomb Associates, Architects Are you an experienced architect who thrives on managing complex projects and building strong client relationships? Join our team as a Registered Architectural Project Manager and play a key role in shaping innovative learning environments for K-12 schools across Texas. About this Role: As a Registered Architectural Project Manager, you will oversee multiple projects from pre-design through construction administration, serving as the primary client representative. You'll collaborate with clients, contractors, consulting engineers, and our internal team to ensure successful project delivery. This role includes attending School Board meetings/Construction meetings, and leading design discussions. Key Responsibilities: • Act as the point person for multi-million-dollar projects., • Coordinate design meetings, owners/architect/contractor sessions, and preconstruction planning., • Prepare and maintain documentation drawings, specifications, schedules budgets and reports., • Conduct job site visits, observe field conditions, and create site visit reports with photo documentations., • Communicate effectively with clients and project teams through verbal and graphic presentations., • 8-10 years working in an Architecture firm, • Experience in K-12, Higher Education and Commercial market sectors is preferred, • Bachelor's or master's degree in architecture, • Registered Architect with a minimum of 5-8 years of experience in an architectural office., • Strong technical knowledge of architectural systems and general understanding of civil, structural, MEP systems., • Proficiency in REVIT, AutoCAD, SketchUp, Microsoft Office, and familiarity with Adobe and Bluebeam., • Work on meaningful projects that impact education., • Collaborate with a passionate, client-focused team., • Competitive salary, benefits and opportunities for growth. Physical Requirements: Job Site Visits: • Ability to navigate building interiors, rooftops and crawl spaces., • Climb ladders and work from elevated platforms or lifts

Job Description Position Summary The Lead Carpenter oversees day-to-day field operations on residential and light commercial construction projects. This role combines hands-on carpentry with leadership responsibilities, ensuring work is completed safely, efficiently, and to a high standard of craftsmanship. The Lead Carpenter serves as the primary on-site point of contact, coordinating labor, subcontractors, materials, and client communication as needed. Key Responsibilities Carpentry & Technical Work • Perform advanced carpentry tasks including framing, trim, cabinetry, doors, windows, siding, and structural repairs., • Interpret architectural drawings, specifications, and scopes of work with minimal supervision., • Ensure all work meets building codes, company standards, and project requirements., • Troubleshoot construction challenges and propose practical, cost-effective solutions. Leadership & Crew Management • Lead, mentor, and direct carpenters, apprentices, and laborers on the jobsite., • Assign daily tasks, monitor progress, and maintain productivity expectations., • Train team members in proper techniques, safety practices, and quality standards., • Maintain a professional, positive jobsite culture aligned with company values. Project Coordination • Coordinate with project managers, subcontractors, inspectors, and clients as needed., • Manage daily workflow, sequencing, and site logistics to keep projects on schedule., • Track material needs, place orders, and ensure timely delivery of supplies., • Document progress, changes, and issues using company systems or apps. Quality & Safety • Conduct daily safety checks and enforce OSHA-compliant practices., • Maintain a clean, organized, and hazard-free jobsite., • Inspect completed work for accuracy, craftsmanship, and adherence to plans., • Identify and correct deficiencies before inspections or client walkthroughs. Qualifications • 5–10 years of carpentry experience, including at least 2 years in a leadership role., • Strong knowledge of residential construction methods, codes, and best practices., • Ability to read and interpret blueprints, scopes, and technical documents., • Proficiency with hand tools, power tools, and jobsite equipment., • Valid driver’s license and reliable transportation., • Strong communication, problem-solving, and organizational skills. Physical Requirements • Ability to lift 50+ pounds, climb ladders, work at heights, and perform physical labor., • Ability to work in varying weather conditions typical of Texas job sites. Work Environment • Full-time, field-based role with travel between job sites., • Occasional overtime or weekend work depending on project needs.Company DescriptionBL Carpentry LLC is a precision millwork and custom carpentry company serving the greater Austin, TX and surrounding Hill Country areas. We prioritize customer satisfaction and handcrafted excellence!BL Carpentry LLC is a precision millwork and custom carpentry company serving the greater Austin, TX and surrounding Hill Country areas. We prioritize customer satisfaction and handcrafted excellence!

Job DescriptionSaronic Technologies is a leader in revolutionizing autonomy at sea, dedicated to developing state-of-the-art solutions that enhance maritime operations through autonomous and intelligent platforms. Position Overview We are seeking a highly skilled Build Engineering Manager to lead the build and tooling engineering teams for our maritime Autonomous Service Vessels. This role will coordinate efforts on the build and tooling engineering teams to accelerate the transition of Saronic’s products from development to full rate production. Responsibilities • Manage tooling requests, developmentand validation across all Saronic products, • Manage the build engineering team to ensure internal and external standards for configuration management and build approach are met, • Coordinate build and tooling engineering efforts to prioritize efforts and rapidly respond to technical and schedule challenges, • Operate as a leadership liaison between engineering and production teams to resolve challenges that arise during design and construction, • Manage non-conformances tickets, lead root cause analysis, and drive resolution via IRBs (Issue Review Boards) and rework plans, • Mange and coordinate Engineering Change Orders (ECOs) across products —ensure traceability, communication, implementation, and verification, • Participate in design reviews and brainstorming sessions for new and existing vessel concepts, • Support documentation, technical writing, and preparation of reports for internal use, regulatory bodies, and client presentations, • Manage CAD models to document changes made during ship construction Qualifications, • Bachelor’s degree or greater in Mechanical Engineering, Naval Architecture, Marine Engineering, or a related field, • 5+ years of experience managing successful build or tooling engineering teams, • Familiarity with maritime industry standards including ABS and coast guard regulations, • Strong fundamentals in core engineering principles, including structural, mechanical, and electrical systems, • Experience working in a shipyard or onboard ships, • Strong knowledge with 2D and 3D CAD software (e.g., Rhino, AutoCAD, SolidWorks, NX), • Deep familiarity with interpreting technical drawings, GD&T, weld symbols, and fabrication tolerances, • Strong communication skills across engineers, technicians, quality teams, and leadership, • Comfortable working in an industrial shipyard environment Benefits, • Medical Insurance: Comprehensive health insurance plans covering a range of services, • Dental and Vision Insurance: Coverage for routine dental check-ups, orthodontics, and vision care, • Saronic pays 100% of the premium for employees and 80% for dependents, • Time Off: Generous PTO and Holidays, • Parental Leave: Paid maternity and paternity leave to support new parents, • Competitive Salary: Industry-standard salaries with opportunities for performance-based bonuses, • Retirement Plan: 401(k) plan, • Stock Options: Equity options to give employees a stake in the company’s success, • Life and Disability Insurance: Basic life insurance and short- and long-term disability coverage, • Additional Perks: Free lunch benefit and unlimited free drinks and snacks in the office Physical Demands, • Prolonged periods of sitting at a desk and working on a computer, • Occasional standing and walking within the office, • Manual dexterity to operate a computer keyboard, mouse, and other office equipment, • Visual acuity to read screens, documents, and reports, • Occasional reaching, bending, or stooping to access file drawers, cabinets, or office supplies

Job Description A multi-disciplinary architectural, engineering and construction firm is seeking a Forensic Engineer & Technical Lead, and help them drive excellence in forensic investigations, design evaluation, and technical leadership at their hybrid offices in Texas. Your Day Includes * Leading and managing complex forensic engineering investigations * Conducting peer reviews of technical reports * Hiring, mentoring, and developing engineering staff * Supervising property and construction division operations * Communicating technical findings effectively to diverse audiences Must Haves * Licensed Professional Engineer (PE), preferably in multiple states * 20+ years of experience in construction/design, forensic engineering, and technical management * Expertise in structural evaluation, damage assessment, building envelope systems, roofing, moisture evaluations, fire damage assessments, and severe weather event investigations * Experience as a testifying expert in construction defect claims * Active membership in professional forensic/engineering associations P.S. In addition to offering a comprehensive health, dental, and vision package, the firm also provides a Costco Card and Gym Membership. If you have the necessary qualifications and are excited about this opportunity, we encourage you to apply. We look forward to hearing from you.

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our team - help us to design the infrastructure and buildings that improve the world! We are seeking a motivated Entry-Level Transportation Bridge Engineer to join our Bridge team in our Austin, TX office. This is an exciting opportunity to launch your career by working on a wide range of bridge and transportation structure projects with the guidance and mentorship of experienced engineers. In this role, the engineer will work on a multi-disciplinary team developing bridge and structural plans for transportation projects for TXDOT and/or municipal localities. Responsibilities: • Assist with the design and analysis of highway and transit-related bridges, culverts, and other transportation structures., • Prepare engineering calculations, reports, and plan sets., • Support senior engineers in developing construction documents and specifications., • Conduct fieldwork including bridge inspections, data collection, and site visits as needed., • Apply structural engineering principles and software tools to solve complex design challenges., • Must have a bachelor’s degree in Civil Engineering from an ABET accredited program, master's degree preferred, • 0-4 years of relevant experience required, • Desire relevant internship experience, • Must be able to work independently and in a design group setting, • EIT/FE certification preferred, • Resume, • WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer:, • Flexible work schedule options, • Competitive salary, • Leave accrual and paid holidays, • Healthcare benefits, • Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance, • Flexible spending accounts for medical and dependent care reimbursement, • 401(k) Retirement Plan, • Tuition Reimbursement, • Employee Assistance Program Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) * Not accepting resumes from 3rd party recruiters for this position * Position #: 2705 #LI - Onsite #LI - Entry Level

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! $34/hour- $660/ per week per diem Job Description: • Complete welding projects using flux core and stick processes., • Must be able to read blueprints and other engineering drawings., • Tack weld clips and brackets in to place prior to permanent welding., • Fabricate, align, and assemble structural parts such as plates, bulkheads, and frames., • Ability to comprehend blueprints, sketches, weld symbols, material types, and templates., • Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Job Requirements: • Minimum 5 years of shipyard welding experience., • Successfully pass welding tests to receive job offer., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass drug test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Mechanical EngineerLocation - Austin, TX \u007C Chicago, IL \u007C Denver, CO (Centennial) \u007C Des Moines, IA \u007C Minneapolis, MN \u007C Muscatine, IAJob Type – HybridRequisition ID - MECHA006001 Stanley Consultants is looking for a Mechanical Engineer for one of our offices. This position is for a candidate with 5-15 years of experience performing functions which require the application of standard mechanical engineering techniques, procedures and criteria in performing a sequence of related engineering tasks. You will work as a design engineer or discipline lead depending on the size and complexity of the project with mentoring opportunities for building project management skills and capabilities on a variety of projects. You must have experience in the power generation industry, university central plants, industrial facilities, or related fields. Work is expected to include new plant design, existing plant retrofits and upgrades (such as liquid, gas, or steam process systems), industrial/process facilities, and other energy infrastructure projects. The projects will vary in size and location. The Mechanical Engineer role is responsible for determining the technical approach, validating the design criteria, directing more junior staff, and performing detailed design tasks such as calculations, specifications, and drawing preparation. You will be expected to perform design duties with minimal supervision and have the ability to communicate effectively within a team environment. Ideally, we would like you to have some experience developing process flow diagrams, Piping & Instrumentation Diagrams, mass and energy balances, system hydraulic modeling, pipe stress analysis, and equipment sizing. Background in thermodynamics, fluid dynamics, and heat transfer are a plus. Candidates should have some experience in applying mechanical engineering concepts, application and adherence to national codes, and means and methods for power generation or similar industries.What You Will Be Doing: • Serves as a technical liaison with clients on project efforts and coordinates technical efforts within discipline areas. Participate in mechanical design development from conceptual design through detailed design, this includes coordinating with other team or project members including other disciplines (structural, electrical, civil, and I&C), • Support preparation of engineering and cost estimating reports through collection and analysis of data, • Prepare and check design computations for system design, equipment and pipe sizing, and determining conditions of service, • Assist in the preparation of technical specifications for equipment and material, • Lead and mentor our 2D/3D designers and less experienced engineers to develop designs and prepare drawings for project, • Work with design and equipment sizing software to prepare engineering and design documents, • Perform or assist with occasional field or site visits for observations, data collection, and documentation efforts for clients and/or project needs, • Consults with construction personnel concerning design constructability as related to field conditions, sequencing, and scheduling of construction events, • Other related duties as assigned by the Department Manager or Project ManagerRequired Qualifications:, • Bachelor of Science in Mechanical Engineering or related degree from an ABET accredited four-year college, • 5+ years of relevant power generation design experience, • Possess PE, or able to obtain PE within 1 yearPreferred Qualifications:, • Experience designing reciprocating engine, simple cycle, combined cycle, and/or combined heat and power plants We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAt Skyways, we are building the future of air transportation with fully autonomous unmanned aerial vehicles (UAVs). Backed by significant funding, including a $37M STRATFI contract from the U.S. Air Force, we operate at the intersection of commercial and defense markets. We have designed, built, and flown aircraft with real customers and government partners, and are now entering the next phase of the company: scaling toward production. Based in Austin, TX and supported by top investors including Y Combinator, Skyways blends rapid iteration with real world deployment. We design, test, and operate our systems in the field, then bring those learnings directly back into engineering and product decisions. As we grow, we are looking for builders and leaders who want real ownership, technical depth, and the opportunity to help take an aircraft from successful deployments to full production. The Opportunity Technicians are a core part of our Manufacturing team. You will be hands-on building and assembling Skyways aircraft from the ground up. Your work will directly impact safety, performance, and reliability before an aircraft ever leaves our facility. This is an on-site role focused on fabrication, assembly, integration, and testing. You’ll work closely with engineering and other technicians to bring designs to life, improve build processes, and ensure every aircraft meets our quality standards. Your craftsmanship and attention to detail will define the final product. You will spend your time on the shop floor building, integrating, troubleshooting, and refining aircraft systems. This role is critical to getting aircraft out the door safely and on schedule.What You’ll Do • Fabricate composite aircraft structures using wet layup and/or prepreg methods., • Perform vacuum bagging, curing, trimming, bonding, and finishing of composite parts., • Assemble aircraft structures including trimming, jigging, drilling, and hardware installation., • Build electrical wiring harnesses (soldering, crimping, continuity testing)., • Integrate avionics, power systems, and flight control components., • Perform functional testing and support ground and flight test preparation., • Diagnose and resolve build issues during assembly and integration., • Create and improve tooling, fixtures, and build processes for repeatability and quality.What You’ll Bring, • 4+ years of hands-on experience with aircraft, drones, robotics, or electromechanical systems., • Direct composite fabrication experience (wet layup and/or prepreg), including vacuum bagging and part finishing., • Experience in aircraft assembly and structural integration., • Strong electrical fundamentals including wiring harness fabrication and component testing., • Ability to read and follow technical drawings and build instructions., • Strong troubleshooting ability across mechanical and electrical systems., • High attention to detail and pride in craftsmanship.Bonus Points If You Have, • Experience working in a production or low-rate initial manufacturing environment., • Background in avionics integration., • A&P License.

Job DescriptionRaba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community “We care for our communities”, • Integrity “We act with integrity”, • Passion “We infuse passion into everything we do”, • Quality “We believe quality comes from a culture of innovation and continuous improvement”, • Serve as consultant in area of expertise (structural steel, pipeline, pressure vessel, and reinforcing steel)., • Prepare inspection reports and other client required letters using RK format., • Maintain close contact with all clients during the entire duration of projects., • Notify Leader of potential group involvement in legal matters., • Work with legal counsel as required and directed., • Position will require traversing uneven construction sites, climbing ladders, performing inspections from a bucket lift, performing inspections from scaffolds, and working outdoors in hot, cold, and windy conditions., • High School Diploma or GED required., • Minimum 5 years steel inspection/welding experience., • Must be certified by the American Welding Society as a Certified Welding Inspector (AWS QC1)., • Must be certified by the American Society of Nondestructive Testing as NDT Level II or higher in both ultrasonic and magnetic particle testing. The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. While performing the functions of this job, the employee is regularly stand, walk, use hands to finger, handle or feel, talk, or hear, reach with hands and arms, climb or balance, stoop, kneel, crouch, or crawl, and drive vehicle short and/or long distances. Frequently sit and occasionally, taste or smell and utilize hand tools such as sledgehammers, shovels, and picks. Occasional lift and/or move up to 50 pounds with or without assistance. Vison requirements include close, distance, and color. May be required to occasionally work in high, precarious places (tall structures, bucket lifts, extension ladders, etc.), fumes or airborne particles (painting, sanding, solvents, flying lint or dust particles, etc.), toxic or caustic chemicals (including potential for chemical spills, etc.), wet or humid conditions (not weather-related, such as greenhouse, carwash, etc.), extreme cold (not weather-related, such as freezer, cold storage, etc.), extreme heat (not weather-related, such as furnace, kitchen, ovens, etc. where temperature is regularly above 100 degrees F), risk of electrical shock (live electrical wires, equipment that retains power after shutoff), risk of radiation (x-ray equipment, nuclear radiation, electromagnetic radiation, etc.), vibration (jackhammer, soil compactor, equipment that creates high vibration, etc.). Frequently required to work in outdoor weather conditions (exposure to outdoor heat, cold or inclement weather). The noise level for this position is Loud (metal can manufacturing department, large equipment, etc.) This position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. EOE/Disabled/Veteran Drug Free Workplace

Job DescriptionStanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title - Senior Mechanical EngineerLocation - Austin, TX \u007C Chicago, IL \u007C Denver, CO (Centennial) \u007C Des Moines, IA \u007C Minneapolis, MN \u007C Muscatine, IAJob Type – HybridRequisition ID - 11130 Stanley Consultants is looking for a Senior Mechanical Engineer with power generation experience to join one of our offices. This position is for a candidate with 15+ years of experience performing functions which require the application of standard mechanical engineering techniques, procedures and criteria in performing a sequence of related engineering tasks. You will work as a discipline lead or project engineer with mentoring opportunities for building project management skills and capabilities on a variety of projects. You must have experience in the power generation industry, university central plants, industrial facilities, or related fields. Work is expected to include new plant design, existing plant retrofits and upgrades (such as liquid, gas, or steam process systems), industrial/process facilities, and other energy infrastructure projects. The projects will vary in size and location. The Senior Mechanical Engineer role is responsible for determining the technical approach, validating the design criteria, directing more junior staff, and performing detailed design tasks such as calculations, specifications, and drawing preparation. You will be expected to perform design duties with minimal supervision and have the ability to communicate effectively within a team environment. Ideally, we would like you to have some experience developing process flow diagrams, Piping & Instrumentation Diagrams, mass and energy balances, system hydraulic modeling, pipe stress analysis, and equipment sizing. Background in thermodynamics, fluid dynamics, and heat transfer are a plus. Candidates should have some experience in applying mechanical engineering concepts, application and adherence to national codes, and means and methods for power generation or similar industries.What You Will Be Doing: • Serves as a technical liaison with clients on project efforts and coordinates technical efforts within discipline areas. Participate in mechanical design development from conceptual design through detailed design, this includes coordinating with other team or project members including other disciplines (structural, electrical, civil, and I&C), • Support preparation of engineering and cost estimating reports through collection and analysis of data, • Prepare and check design computations for system design, equipment and pipe sizing, and determining conditions of service, • Assist in the preparation of technical specifications for equipment and material, • Lead and mentor our 2D/3D designers and less experienced engineers to develop designs and prepare drawings for project, • Work with design and equipment sizing software to prepare engineering and design documents, • Perform or assist with occasional field or site visits for observations, data collection, and documentation efforts for clients and/or project needs, • Consults with construction personnel concerning design constructability as related to field conditions, sequencing, and scheduling of construction events, • Other related duties as assigned by the Department Manager or Project ManagerRequired Qualifications:, • Bachelor of Science in Mechanical Engineering or related degree from an ABET accredited four-year college, • 15+ years of relevant power generation design experience, • Possess PE, or able to obtain PE within 1 year, • Natural gas power generation experiencePreferred Qualifications:, • Experience designing reciprocating engine, simple cycle, combined cycle, and/or combined heat and power plants We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.