Technical specialist jobs in Abilene, TexasCreate job alerts

Req ID: 255836 Job Location: 4800 Abilene, TX (Production) Work days/Shift Hours – if applicable: 2-2-3 / 5:30PM - 5:30AM Compensation: Starting pay ranges from $34.38 to $42.02 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. The role of a Controls Technician is to provide competent and effective electrical and controls support to Plant operations. The ability to perform work safely, meet the needs of Operations, execute the maintenance program and comply with all safety codes such as the National Electrical Code is paramount. The Controls Technician must ensure plant electrical and control systems are installed, maintained and modified in accordance with local, state and national electrical safety codes. The Controls Technical must identify, troubleshoot and repair problems in electrical and controls wiring and programming that occur in production equipment and systems and able to work with voltages up to 600V, three-phase & single-phase A/C circuits, transformers, switchgear, and motor control centers. He/she must be able to run tests, isolate problems, replace faulty sections of wiring, and perform other tasks as necessary. He/she also performs preventive maintenance and upgrades to electronic control systems. • Perform preventive maintenance on electrical and control systems to include disassembly, cleaning, reassembly, and calibration., • Understand how to read and translate the information found within building and process blueprints and one-line diagrams to install outlets, circuits, load centers and other forms of electrical equipment., • After installing the electrical equipment, test all connections to ensure all components are working properly and safely., • Troubleshoot and diagnose electrical and controls issues in industrial equipment and processes using experience, system knowledge and proper instruments appropriate to the voltages and currents encountered., • Meet and follow local, state and national electrical codes., • Maintain motor control centers (MCC’s), switchgear, industrial robots, electronic controllers on mechanized tools, as well as transformers and generators., • Communicate with management, engineers, mechanics, and equipment operators to advise them if there are any potential electrical hazards., • Install fiber optic cables, coaxial wires and computers in support of plant telecommunications systems., • Execute the maintenance work schedule as provided by his/her supervisor. Proper execution of the work schedule will require strategic decisions to ensure the scheduled work will be completed within the period scheduled., • Keep the assigned Plant Controls Specialist informed of all issues which may affect the operational capability of the area processes and equipment., • Examine jobs to be done and determine scope and best way to accomplish the work. Consult with requester, maintenance planner, and/or supervisor when necessary., • Obtain one-lines, drawings, instructional manuals and special procedures, as needed, from files or other sources. Make any additional sketches, diagrams, etc., necessary to clarify the intent of the work order., • Ensure the safety needs are given a top priority in operations support and work execution. Some examples are Arc Flash/Shock Hazard safety, confined space entry, LOTO, hazardous materials, hand tool safe use, etc., • Update the computerized maintenance management system (CMMS) as necessary to maintain accurate plant asset historical records., • Have complete knowledge of plant's processes and packaging systems., • Adhere to Good Manufacturing Practices (GMPs) in the execution of the work schedule and operational support. Ensure the shop is maintained in a safe and orderly fashion., • Enforce plant polices in the execution of their assigned duties., • Protect the integrity and quality of product at all times., • Attend meetings and supports continuous improvement initiatives., • Recommend equipment to be included in preventive maintenance programs., • Suggest improvements to all maintenance processes, including planning scheduling, preventive maintenance, corrective maintenance, CMMS, storeroom operations, etc., • Promote the conservation of energy and water., • Maintain close contact with assigned maintenance crew, the production supervisor and equipment production operator technicians., • Make recommendations for system improvement., • Maintain necessary records and files and distributes meaningful and accurate control reports., • Recommend additions to storeroom stock., • Perform other tasks and special assignments as requested by management. Education: • High School Diploma or GED; technical mfg. trade, or Associate’s Degree preferred. Experience: • High School Diploma or GED; technical mfg. trade, or Associate’s Degree preferred., • Basic industrial math skills, English language reading comprehension and writing, • 3-5 Years of manufacturing maintenance experience focused on controls and electronics maintenance preferred., • Proficiency in controls equipment, i.e. Allen Bradley PLCs, VFDs, HMIs, and Industrial Networks required. Experience with various Human Machine Interfaces, • Basic Programmable Logic Control (PLC) knowledge required., • Must be able to use a computer and associated PLC software programs, • Able to execute small and medium projects involving controls equipment such as SLC 500, Controls Logix, Panel View Plus and Allen Bradley VFDs, • Ability to follow manufacturers specifications and schematics., • Working knowledge of hand and power tools., • Able to read one-line diagrams, blueprints and schematics., • Ability to read and interpret a variety of technical data, such as schematics, one-line diagrams, and technical orders relating to the electrical trade., • Able to calculate electrical circuit load requirements., • Comprehensive knowledge of the operation, capabilities, and limitations of complex electrical power and distribution., • Maintenance background, which includes hydraulics, controls, electrical, PLC’s, machine tools and pneumatics, • Skill in troubleshooting electrical problems on large projects and applying test procedures., • Skill in the use of hand and power tools of the electrician trade to include a variety of electronic, electrical, or electromechanical test and measurement equipment., • Ability to test, calibrate, troubleshoot, overhaul, repair, and install complete electrical systems., • May be required to provide own tools, • Able to lift up to 50 pounds, • Ability to work on multiple levels, such as catwalks, ladders, etc. and ability to work in extreme temperatures, • Must have strong problem-solving skills and the ability to work efficiently under stressful situations, • Must be able to work flexible shift schedules up to 12-hour shifts as determined by business need, • Perform all tasks in a safe manner to ensure achievement of Quality, Service, Cost,Sustainability, and Safety objectives., • Knowledge of safety, environmental, and security regulations, practices, and procedures. Knowledge of regulations, procedures, and policies related to records maintenance and documentation. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at _ if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights _ Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

physics research analysisscientific writingcritical thinkingproblem-solvingdata analysisquestion and exam creationremote collaborationtime managementanalytical reasoningtechnical document synthesisai training content developmentinterdisciplinary teamworkattention to detailindependent workdigital content creationAbout micro1micro1 connects domain experts to the development of frontier AI models. Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform. AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality contributions at scale.Our goal is to enable 1 billion people to do meaningful work by applying their expertise to AI. We’ve raised $40M+ in funding, and our AI recruiter has powered over 1 million AI-led interviews as our global network of experts grows into the human intelligence layer for AI. Job Title: Physics Expert Job Type: Contractor Location: Remote Rate: 20$-50$ per task Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Key Responsibilities: • Thoroughly analyze, interpret, and summarize complex physics documents and research papers., • Create and review high-quality questions and problems related to diverse physics topics for AI model training., • Extract key data, perform detailed computations, and validate analytical solutions in various physics domains., • Deliver clear, concise written explanations and rationales for technical problems and solutions., • Collaborate with a multidisciplinary remote team while maintaining independence in daily work., • Leverage your specialist expertise to ensure accuracy and depth in all content generated or reviewed., • Maintain a high standard of quality and consistency while meeting ongoing deadlines. Required Skills and Qualifications: • 2+ years of professional experience in physics or a closely related field, either in academia or a lab/workplace setting., • Exceptional written and verbal English communication skills, with strong attention to detail., • Proven ability to read, analyze, and synthesize technical documents and research literature., • Demonstrated experience creating, editing, or reviewing scientific questions, exams, or technical exercises., • Ability to work independently and proactively with minimal supervision in a remote setting., • Excellent critical thinking and analytical skills for data evaluation and problem solving., • Strong time management abilities to handle multiple tasks efficiently. Preferred Qualifications: • Advanced degree (MSc, PhD) in Physics or a related discipline., • Experience interfacing with AI, EdTech, or digital content creation projects., • Familiarity with interdisciplinary scientific analysis and collaborative workflows.

$35 - $100/hourpayEViewsMacroeconomicsAbout micro1micro1 connects domain experts to the development of frontier AI models. Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform. AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality contributions at scale.Our goal is to enable 1 billion people to do meaningful work by applying their expertise to AI. We’ve raised $40M+ in funding, and our AI recruiter has powered over 1 million AI-led interviews as our global network of experts grows into the human intelligence layer for AI. Job Title: Macroeconomic Modeling Specialist (EViews) Job Type: Contract Location: Remote Job Summary Join our customer's team as a Macroeconomic Modeling Specialist (EViews) and drive the creation, validation, and automation of advanced macroeconomic models. Leverage your expertise in EViews to develop robust time-series and forecasting solutions, contributing essential economic insights that inform key decisions at the organizational level. This remote opportunity is ideal for a passionate modeler who values clarity in communication and excellence in quantitative analysis. Key Responsibilities • Design and implement sophisticated time-series models such as VAR, VECM, ARIMA, and cointegration frameworks using EViews., • Conduct rigorous model diagnostics and validation to ensure robustness and reliability of forecasts., • Automate forecasting workflows for efficiency and scalability within the modeling process., • Translate complex statistical outputs into clear, actionable macroeconomic insights for both technical and non-technical stakeholders., • Document modeling approaches and results with precise, concise written reports., • Collaborate with the customer's team to integrate modeling results into broader economic narratives and policy recommendations., • Stay current with macroeconomic modeling best practices and EViews software updates. Required Skills and Qualifications • Extensive hands-on experience with EViews, including scripting and automation functionalities., • Proven expertise in building, estimating, and validating time-series models—especially VAR, VECM, ARIMA, and cointegration models., • Deep knowledge of model diagnostics, stability tests, and forecasting accuracy measures., • Strong quantitative background with the ability to explain complex modeling processes in clear written and verbal communication., • Demonstrated success in automating modeling and forecasting workflows., • Ability to extract economic meaning from statistical outputs and present findings insightfully., • Self-driven, detail-oriented, and adept at remote collaboration. Preferred Qualifications • Advanced degree in Economics, Econometrics, Applied Statistics, or related field., • Previous experience supporting central banks, policy institutions, or financial sector clients with macroeconomic modeling., • Familiarity with additional econometric software or programming languages (e.g., R, Python, Stata).

Position: Safety Specialist II Location: 4118 Vine St Abilene, TX Job Id: 1140 of Openings: 1 TITLE: Safety Specialist II LOCATION: Abilene, TX POSITION SUMMMARY: Our company is seeking a highly motivated and detail-oriented Safety Specialist to join our team. The Safety Specialist will be responsible for identifying and assessing potential safety hazards, developing and implementing safety protocols, and ensuring compliance will all safety regulations. The successful candidate will have a strong background in safety, preferrable in data center service operations, and a passion for promoting a safety and healthy work environment. ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Verify safety policies and procedures to ensure compliance with all company, local, state, and federal regulations. Conduct project management & regular risk assessments, inspections, and audits to identify potential safety hazards and risks for construction, battery maintenance/installation, HVAC, data center facility operations, commissioning, and other departments. Investigate incidents to determine their root causes and develop corrective action plans. Building and giving safety training to employees. Collaborate with other departments to ensure that safety issues are addressed and resolved in a timely manner. Monitor and review safety performance metrics to identify trend areas for improvement. Stay up-to-date with the latest safety regulations and industry best practices. - Ability to travel up to 30% QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience (Desired): Bachelor's degree in occupational health and safety, environmental, engineering, or related field. Minimum 3-5 years of progressive experience in EHS preferably with data center construction, maintenance, service and facility operations experience. Working knowledge of U.S Occupational Safety and Health Administration (OSHA) regulations and standards and other non-regulatory safety standards applicable to the location. Knowledgeable with NFPA 70E, DOT, and environmental compliance is a plus. Experience conducting incident investigations and can follow reporting processes. Communicate effectively with client safety team regarding incidents and other action items. Experience with JHAs, SOPs, MOPS,, technical reports and procedures. Excellent communication and interpersonal skills. Ability to work independently and as part of a team. Detail-oriented with strong analytical and problem-solving skills. Computer Skills: Knowledge with experience using Microsoft Office Certificates and Licenses: BCSP credentials are a plus (CHST, CSP, etc.) Supervisory Responsibilities: No supervisory responsibilities for this position. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. CPG Participates in E-Verify Pay Range: $85,996 - $129,050 per year Apply for this Position

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world. Job Description Turner & Townsend is highly experienced in providing authoritative advice and professional expertise in the fields of Contracts and Procurement Support along with Project Advise to a market leading client base. We are dedicated to making the difference to all our clients engaged in the delivery of major capital projects and programs in the Americas and globally. Due to increased workload and securing of new clients, Turner & Townsend has a new opportunity for a Senior Contracts Manager. Responsibilities: The successful candidate will have the opportunity to work with an outstanding team of specialist consultants, advise major clients on large scale construction projects and challenge themselves in a market-leading global business. Duties of This Role The individual will have the opportunity to work alongside a highly skilled team delivering best-in-class strategic procurement and contract advice, including end-to-end advisory services to one of our key account clients. • Fulfilling the responsibilities of a Contracts Manager., • Supporting the development and implementation of contracting strategies for major construction projects using a range of privately funded delivery models., • Support the provision of specialist contracts and related procurement advice to private sector clients across a variety of healthcare construction contracts., • Drafting Requests for Proposals (RFPs), evaluation scorecards and contracts and supporting the process for procuring vendors., • Developing contract structures for the main delivery strategies, including in multi-packaging scenarios on complex projects with multiple contract interfaces., • Supporting end-to-end procurement services on major construction and construction-services-related projects., • Building positive relationships within the project team and with Client personnel and their key advisors., • Managing and updating internal contract team trackers, reviewing SOW’s and MPA’s proposal documentation and the work winning capability of the contract services division., • Supporting the delivery of both teams and wider business targets., • SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Qualifications, • Experience working in multiple contract environments and under a range of procurement/contract delivery routes., • Degree or equivalent in construction or a related course of study., • Confident, independent, and able to work autonomously without need for supervision., • Ability to engage in a collaborative team environment., • Excellent written and oral communication skills, adaptable and with a determination to succeed. Education and Experience • At least 5-7 years’ experience in the construction industry and/or contract services to public and or private clients for large-scale capital investment projects., • Working knowledge and experience of various forms of contracts for the delivery of construction projects., • Experience working in a multi-contract environment., • Experience in the development and procurement of GMP’s/Lump Sum or similar project-financed projects is desirable., • Supporting contract development and administration experience across a variety of sectors including health care, retrofits, and/or real estate; client-side., • Experience in implementing contracting strategies, including risk identification, quantification, and allocation., • Experience in contract development, supporting drafting of bespoke contract schedules and clauses and reviewing contract documents prepared by others., • Managing inputs from other professional team members, including technical, legal, and commercial/financial., • Proven ability to liaise with and coordinate multiple stakeholders to develop robust contract documents. Additional Information On-site presence and requirements may change depending on our client's needs Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at www.turnerandtownsend.com/ and https://www.heery.com/ All your information will be kept confidential according to EEO guidelines. #LI-DL1 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job Description We are West Techs Chill Water Specialist - Commercial and Industrial Chiller and Boiler work, Cooling Towers, Air Conditioning Service, Industrial Coating, and Rental Chillers. Our culture is extremely important to us and we are looking for someone that is interested in being part of a great team that works together seamlessly. We have a family first workplace built on our core values of making it happen and showing appreciation for a job well done. We differentiate based upon our level of service and commitment to our customers. That can only be provided when every team member does their part to deliver a seamless customer experience. We offer an excellent benefit package and compensation for those who go beyond just repairing equipment. For the right person we will offer top dollar! Job Title: Commercial HVAC Service Technician Pay Scale: $20.00 - $45.00 per hour, based on skills, experience, performance, and on going training attendance. Work Hours: 8:00am to 5:00pm, with 1 hour lunch; alternating on call schedule to cover 24/7 emergency service; some weekends and evenings Primary Job Function: To provide maintenance and repairs on a wide variety of commercial heating and air conditioning systems according to company standards providing the customer with a high quality experience. Provide feedback to Service Manager regarding technical training, inventory, and area needs. Reports to: Service Manager Required Qualifications: Universal EPA Certification Ability to read and interpret wiring diagrams, schematics, and blueprints. Be familiar with a wide range of equipment and troubleshooting techniques. Experience making repair and replace decisions. Experience working on chillers and or commercial HVAC equipment. Advanced customer service skills. Demonstrate willingness to accept responsibility and leadership roles.

Description RK Company Overview RK Industries is a second-generation family-owned company led by brothers Rick and Jon Kinning. With seven specialized business units working together, we deliver construction, fabrication, manufacturing, and building services with a focus on safety, quality, and craftsmanship. People join RK for the craftsmanship, complexity, and the ability to make a real impact. Our in-house capabilities mean employees see their ideas become real solutions, creating meaningful collaboration and clear visibility into how work gets built. Growth happens through challenging projects, mentorship from experienced builders, and opportunities that stretch your skill set. With RK University, accredited apprenticeships, competitive benefits, and deep community investment, RK offers the stability of a family-owned company with the opportunity and momentum of an industry leader. Position Summary Provide comprehensive onsite practical and technical direction pertaining to contract scope of work for respective trade. Oversee the scheduling, coordination, and supervision of trade crew activities. Adhere to project schedule and orchestrate timely project completion within budget. Cooperate with project management and maintain open lines of communication regarding trade related matters concerning project budget, productivity, change orders, and customer satisfaction. Role Responsibilities \n • Provide a safe work environment for you, RK crews, and all job site personnel. Assist Corporate Safety Managers as requested.\n, • Customer satisfaction.\n, • Work within the perimeters of trade specific project budget.\n, • Ensure quality craftsmanship on trade specific system installations.\n, • Plan specific trade installation approach and procedures.\n, • Coordinate CPMI for specific trade.\n, • Schedule daily and weekly trade activities.\n, • Trade related materials, tool, and equipment requisitions.\n, • Trade specific journeyman to apprentice ratio.\n, • Maintain positive and professional relationships with all customers, external and internal.\n, • Conflict resolution.\n\n Accountability \n • Comply with all company policies and procedures.\n, • All employees are accountable for safety and health and are empowered to stop work if an unsafe condition is present. Employees should immediately notify their supervisor so that the hazard may be corrected.\n, • RK Mechanical employees and subcontractors are required to implement and maintain all safety and health system practices including the training requirements of RK Mechanical Orientation, shop or site-specific orientation, CPR/First Aid/AED/Bloodborne Pathogens, Hazard Identification and Reporting, and OSHA30.\n, • Trade Foreman Plumbing require a minimum of Journeyman Plumbers License. \n\n Minimum Physical Requirements \n • Work outside, inside, and in dusty noisy and hazardous areas.\n, • Work in high places, tight places, confined spaces and/or other adverse locations.\n, • Climb, balance, squat, kneel, and crouch.\n, • Work in all types of weather.\n, • Must have working knowledge of all trade materials and tools.\n, • Ability to lift and carry 51 to 75 lbs. occasionally, and/or 31 to 45 pounds of force frequently, and/or greater than negligible up to 16-22 pounds of force constantly to move objects.\n\n Foreman Career Level \n • Indirect supervision.\n, • Performs technical responsibilities.\n, • Contributes to the development and improvement of concepts, techniques and procedures.\n, • Coordinates own tasks with a specific range of responsibilities under established procedures.\n, • Contributes to a team under general supervision of an experienced professional or manager.\n, • Skilled specialist or recent college/university graduate.\n, • Role specific skills and experience required.\n, • Requires judgment or initiative in resolving issues and making recommendations.\n, • Supervision and guidance of crews.\n\n What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world. Job Description Turner & Townsend is highly experienced in providing authoritative advice and professional expertise in the fields of Contracts and Procurement Support along with Project Advise to a market leading client base. We are dedicated to making the difference to all our clients engaged in the delivery of major capital projects and programs in the Americas and globally. Due to increased workload and securing of new clients, Turner & Townsend has a new opportunity for a Contracts Manager. Responsibilities: The successful candidate will have the opportunity to work with an outstanding team of specialist consultants, advise major clients on large scale construction projects and challenge themselves in a market-leading global business. Duties of This Role The individual will have the opportunity to work alongside a highly skilled team delivering best-in-class strategic procurement and contract advice, including end-to-end advisory services to one of our key account clients. • Fulfilling the responsibilities of a Contracts Manager., • Supporting the development and implementation of contracting strategies for major construction projects using a range of privately funded delivery models., • Support the provision of specialist contracts and related procurement advice to private sector clients across a variety of healthcare construction contracts., • Drafting Requests for Proposals (RFPs), evaluation scorecards and contracts and supporting the process for procuring vendors., • Developing contract structures for the main delivery strategies, including in multi-packaging scenarios on complex projects with multiple contract interfaces., • Supporting end-to-end procurement services on major construction and construction-services-related projects., • Building positive relationships within the project team and with Client personnel and their key advisors., • Managing and updating internal contract team trackers, reviewing SOW’s and MPA’s proposal documentation and the work winning capability of the contract services division., • Supporting the delivery of both teams and wider business targets., • SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Qualifications, • Experience working in multiple contract environments and under a range of procurement/contract delivery routes., • Degree or equivalent in construction or a related course of study., • Confident, independent, and able to work autonomously without need for supervision., • Ability to engage in a collaborative team environment., • Excellent written and oral communication skills, adaptable and with a determination to succeed. Education and Experience • At least 3-5 years’ experience in the construction industry and/or contract services to public and or private clients for large-scale capital investment projects., • Working knowledge and experience of various forms of contracts for the delivery of construction projects., • Experience working in a multi-contract environment., • Experience in the development and procurement of GMP’s/Lump Sum or similar project-financed projects is desirable., • Supporting contract development and administration experience across a variety of sectors including health care, retrofits, and/or real estate; client-side., • Experience in implementing contracting strategies, including risk identification, quantification, and allocation., • Experience in contract development, supporting drafting of bespoke contract schedules and clauses and reviewing contract documents prepared by others., • Managing inputs from other professional team members, including technical, legal, and commercial/financial., • Proven ability to liaise with and coordinate multiple stakeholders to develop robust contract documents. Additional Information On-site presence and requirements may change depending on our client's needs Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this we promote a healthy, productive and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at www.turnerandtownsend.com/ and https://www.heery.com/ All your information will be kept confidential according to EEO guidelines. #LI-DL1 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job DescriptionSalary: $760-$900/Week Depending on Experience Job Title: Weed Control Specialist (Well Train the Right Person) This role is for someone who wants tobecomea professionalnot just clock in. At MasterScapes, our Weed Control Specialists are trusted professionals. They learn the science behind what they do, take ownership of their routes, and take pride in protecting and improving the landscapes our clients depend on. You dont need prior experiencewere looking for someone hungry to learn, ready to be coached, and willing to take responsibility early. Ideal Candidate Profile Our ideal candidate is an early-career professional with no prior treatment experiencebut a strong hunger to learn, grow, and take ownership. They are coachable, disciplined, and hold themselves accountable without needing to be chased. They pay attention to details, observe patterns, and enjoy solving problems with their hands and their head. They love being outdoors and find satisfaction in meaningful, tangible workwhether thats caring for landscapes, learning new technical skills, or protecting the health of a property. They are motivated by skill progression, responsibility, and knowing that their work makes a real difference. The ideal candidate is not interested in cutting corners or being micromanaged; they want to earn trust, become a licensed treatment technician, and build a long-term career at MasterScapes where professionalism, pride, and growth are expected. This might be you if you: • Love working outdoors and with your hands, • Are coachable, disciplined, and take ownership of your work, • Like learning new skills and getting better every season, • Notice details, ask questions, and enjoy problem-solving, • Want real responsibilitynot constant supervision What youll do: • Learn professional treatment techniques (fertilization, weed control, plant health), • Own and manage a route with increasing independence, • Observe, diagnose, and help solve landscape health issues, • Build trust with supervisors, teammates, and clients, • Work toward becoming alicensed Treatment Technician What well teach you: • The technical and safety knowledge needed to do the job right, • How to think like a treatment professionalnot just follow instructions, • How to grow your skills, responsibility, and credibility over time This role isnota fit if you: • Cut corners or rush through work, • Need to be constantly told what to do, • Avoid accountability or feedback, • Arent interested in learning or growing Why youll love working here: At MasterScapes, Treatment Technicians are respected professionals. Youll be trusted, developed, and challenged to grow. If you want to build real skills, make a visible difference, and create a long-term careernot just a jobwe want to meet you! If youre ready to learn, take ownership, and build a career as a trusted Treatment Technician, apply today and grow with MasterScapes!

Job Description Bonus: Eligible for up to $5,0000 RELOCATION AND HIRING BONUS Job Title: CNC Machinist Specialist (Expert Level) Department: Machine Shop Reports To: Supervisor of Department FLSA: Non-Exempt Status: Full-Time Shift: 1st & 2nd shift (4x10 Schedule) (1st 5:00 am - 3:00 PM) (2nd 2:45 PM - 12:45 AM) Location: Pueblo, CO (Relocation Assistance Available) Remote: On-Site Pay Range: $30.00-$39.00 Hourly About Gulftech International Our companies are the world’s recognized leaders in the engineering, manufacturing, leasing, selling, and servicing of industrial equipment and components serving food production and processing companies. Gulftech’s family of companies touches 90% of the world’s fresh produce, nuts, and fish products across 85 countries worldwide. About Gulfco Manufacturing Gulfco is a family-owned manufacturing organization with best-in-class operations and a “small company” culture that produces parts, equipment, and industrial solutions for the global food processing and packaging industries. As a proud member of the Gulftech family of companies, we serve as the turnkey supplier to a diverse portfolio of multi-national contract manufacturers, each of which is the leader in their respective market throughout the world. Job Summary Are you a skilled CNC Machinist who thrives on challenging setups and tight tolerances? This role goes beyond button-pushing — we need someone confident in setting up, dialing in, and producing complex, one-off, and low-volume parts with high precision. Responsibilities Must be a subject matter expert in the following functions/activities (perform correctly and without assistance): Able to Run Manual and CNC Machines at an expert Level. • Perform full setups on CNC mills and/or lathes from print or model — including indicating vises, fixtures, and part zeros., • Interpret complex blueprints, GD&T, and 3D models to execute machining strategies., • Adjust feeds, speeds, tooling, and offsets to optimize quality and efficiency., • Troubleshoot issues related to tooling, setup, and part accuracy independently., • Ensure in-process inspection and first article inspection compliance., • Collaborate with engineers and programmers to refine setups and improve processes. What You Bring: • 5+ years of CNC machining experience, with a strong emphasis on complex setups and first-run parts., • Strong proficiency in reading and interpreting technical drawings, GD&T, and setup sheets., • Strong understanding of machine offsets, tool presetting, and basic G/M code., • Experience with multi-axis machining or live tooling., • Strong understanding of machining processes and techniques., • Proficient in reading and interpreting blueprints and technical drawings., • Familiar with the use of precision measuring instruments like micrometers and calipers., • Solid understanding of lean manufacturing, • At least 5 years of relevant experience in machining manufacturing. We offer competitive pay, a benefits package, and opportunities for career growth. Benefits and Compensation • Two medical plans (PPO & HSA), dental, and vision insurance, • Paid time off, Vacation, and eight Holidays, • Employee assistance program (EAP), • 401k, • Profit sharing, • Free Life, • Free AD&D, • Free Disability insurance (Shot and Long-Term Disability), • Tuition Assistance, • Company cell phone/cell phone stipend *Salary information is a general guideline only. Actual compensation considers factors such as (but not limited to) the scope and responsibilities of the position, location, work experience, education, and key skills. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. *Gulfco Manufacturing is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. We do not discriminate against applicants or employees on the basis of age, ancestry, race, sex (including pregnancy and sexual orientation/gender identity), color, religion, national origin, parental status, marital status, political affiliation, family medical history or genetic information, military or veteran status, disability, medical condition, or any other non-merit based factor or status protected by federal, state or local law

Job Description Does this describe you? Organized Adaptable Disciplined Detail-Oriented If so, let’s talk!! We are currently seeking a self-motivated, professional individual to join our PASSARE team as a CUSTOMER SERVICE (OPERATIONS SUPPORT) SPECIALIST. As part of the customer on-boarding process, you will configure the Passare online platform and provide general customer support assistance. You will work with cross-functional teams including sales and customer support to realize customer satisfaction. You will utilize your expertise in customer support to move at the quick pace of a growth company. Passare is a cloud-based (SaaS) application with interconnected modules to help funeral homes improve operational efficiency and enhance communication and collaboration internally and with family members. Passare's mission is to offer a best-in-class experience for funeral professionals and the families they serve. We seek to help people connect with experts and resources that help simplify their lives and give them more control during one of life's most difficult passages, the death of a loved one. Only Passare helps funeral professionals and families connect and communicate from anywhere, at any time, from any device. This is a full-time position located in our Abilene, TX office. Our team, platform, and best practices make us an exciting place to work! To learn more about Passare visit our website at https://www.passare.com/ Requirements • High school diploma or equivalent, • Preferred 2 years experience in customer support or operations Responsibilities: • Provide phone and email customer support, • Answer troubleshooting calls, build platform knowledge and provide technical assistance, • Create and manage configurations of the Passare SaaS system for customers, • Load and validate customer system data, • Create, from customer documents, on-line versions with data tagging (based on Word, PDF templates), • Training responsibilities include scheduling and setting up webinars with customers, • Utilize Knowledge Base to ensure processes are completed accurately Qualifications: • Excellent written and verbal communication skills, • Excellent data entry and typing skills, • Ability to multi-task, set priorities, and manage time effectively, • Ability to gather accurate information, • Effective problem resolution and critical thinking skills, • Ability to use and manage web-based and database tools, • Strong organizational skills, • Commitment to company values About Directors Investment Group Directors Investment Group (DIG) offers an award-winning workplace that is truly one-of-a-kind. DIG has been recognized with numerous workplace awards, including the prestigious FORTUNE magazine “Best Small & Medium Workplaces” List, the “Best Workplaces in Finance & Insurance” List, the “Best Workplaces for Millennials” List, and the “Best Workplaces in Texas” List. The company is also a winner of the top 100 “Best Companies to Work for in Texas,” published by Texas Monthly. Based in Abilene, TX, DIG offers a unique corporate culture and benefits that our employees love! Founded on Christian principles of leadership through service, integrity, honesty, and respect, the company is dedicated to serving the funeral profession and helping funeral homes enhance their service to families in a rapidly changing marketplace. In fact, our mission is "to be known as the best, most-respected provider of service to the funeral industry." So, what makes DIG such a great place to work? We apply these same principles to how we treat our employees: offering excellent compensation, a fun, friendly, and supportive work environment, and more benefits and perks than we can mention; including employer-paid health coverage, 401(k) matching, life insurance, an on-site clinic, a 24-hour fitness center, free fresh fruit and beverages, a corporate university, book studies, and many personal growth opportunities for mind, body, and soul. An Equal Opportunity Employer Powered by JazzHR tlj1LqVrMG

Job Description Whether you're a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. 6 month contract in Nolan, TX Why Rosendin? Committed. Innovative. Engaged. If you're looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The IT Support Specialist is responsible for IT support for the Regional Office including but not limited to jobsites in several locations. WHAT YOU'LL DO: Responsible for the day-to-day desktop/laptop, cellular, telephone and local network support of assigned offices and jobsites. Provide end-user support and problem resolution for desktop computers, laptop/notebook computers, printers and other peripheral hardware, and software applications. Utilize our trouble-ticketing system to document your work and facilitate communication with our clients. Work with all levels of end users including high-level users, difficult users, non-technical users, demanding users. Responsible for implementation, configuration, coordination, control, maintenance, troubleshooting, security, usage monitoring and the development of specialized systems and operational procedures. Responsible for providing project management for new jobsite setups, to include assessing jobsite IT support requirements, circuit ordering and implementation, equipment ordering and delivery and continued support throughout the life of the jobsite. The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties will be assigned based on the position's role within the business unit. WHAT YOU'LL NEED TO BE SUCCESSFUL: Team player with effective communication & customer service skills with the ability to stay on task when working independently Organize and manage multiple tasks in a fast-paced environment Working knowledge and practical experience of the following technologies: networking, Active Directory, Storage Area Network, virtual machines, and Disaster Recovery procedures and policies Conversant in Microsoft operating systems and productivity tools Experience with Cisco network equipment is a plus Demonstrated success taking direction and working independently Customer relations skills, superior written, oral, and interpersonal communication skills. Must be exceptionally detailed oriented Perform in a dynamic and fast-paced team environment Demonstrated ability to establish and maintain an effective follow-up system to ensure timely and accurate handling of information requests Demonstrated ability to use discretion and sensitivity when handling confidential information. Self-starter, proactive, and able to interface with end users and prioritize issues, and manage user expectations Extensive experience in multi-org environment Engineering and Construction Related Industry Knowledge desired System Administration and support experience would be desired Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred Prioritize and manage multiple tasks, changing priorities as necessary Work under pressure and adapt to changing requirements with a positive attitude Oral and written communication skills as required for the position Self-motivated, proactive and an effective team player Interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: Associate degree in Information Technology, Computer/Information Science, or related discipline Minimum 3 years' practical IT experience required Can be a combination of education, training, and relevant experience TRAVEL: Up to 20% WORKING CONDITIONS: General work environment - sitting for extended periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions, such as fluorescent lighting and air conditioning. Noise level is typically low to medium; it can be loud on a job site. Occasional lifting of up to 30 lbs. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter - Our Benefits ESOP - Employee Stock Ownership 401k Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business and your career. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law.

Due to our success and increased business opportunities, we are looking for a Leave Administration Specialist who specializes in ADA to provide excellent customer service to employees with regards to all aspects of absence management.

Rise Technical, a leading international recruitment business making a huge impact across the US market.

This individual will play a key role in audit readiness, policy development, and process standardization, helping translate day-to-day operations into clear documentation, workflows, and governance practices.This is an 11 week contract to start, so this could be a great fit for someone looking for a

Driving with Uber is an alternative to a part-time or full-time job and can get you earning cash on the road quickly.Driving with Uber allows you to earn quick cash while maintaining the flexibility your schedule requires (gig, part-time, full-time, seasonal, hourly, or temporary).With Uber, you can