Technical support jobs in Ontario, CaliforniaCreate job alerts

Company: Fusion Medical Staffing Location: Facility in Pomona, California Job Details Fusion Medical Staffing is seeking a ICU RN for a 13-week travel assignment in Pomona, California. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent experience as an ICU RN, • Valid RN license in compliance with state regulations, • Critical Care Registered Nurse (CCRN) certification, • TNCC, NIHSS certification The ICU Registered Nurse is responsible for providing comprehensive, critical care to patients in the intensive care unit. This role encompasses assessing and monitoring critically ill patients, operating life-support equipment, administering advanced treatments, and collaborating with multidisciplinary healthcare teams. The position requires strong critical care skills, advanced clinical judgment, excellent communication, and a commitment to maintaining the highest standards of patient safety and professional ethics in high-acuity settings. Essential Work Functions: • Assess and monitor critically ill patients, recognizing and responding to subtle changes in patient condition, • Administer complex medications and treatments in accordance with approved critical care nursing techniques, • Operate and manage advanced life support equipment, • Ensure patient safety and comfort in high-acuity ICU environments, addressing physical and emotional needs, • Record significant conditions, reactions, and interventions, notifying the appropriate provider of changes in patient status, • Perform and interpret advanced hemodynamic monitoring, including arterial lines, central venous pressure, and pulmonary artery catheters, • Accurately document all assessments, interventions, and patient responses in the medical record in a timely manner to ensure continuity of care and compliance with regulatory standards, • Provide education to patients and families regarding the ICU environment, treatments, and recovery expectations, • Communicate closely with interdisciplinary healthcare teams to optimize patient care, • Maintain proficiency in critical care procedures and technologies through ongoing education and training, • Adhere to strict infection control protocols to protect immunocompromised patients and reduce risks, • Engage in quality improvement initiatives to enhance ICU patient outcomes and operational efficiency, • Perform other duties as assigned within scope, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel ICU RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb9

Company: Fusion Medical Staffing Location: Facility in Pomona, California Job Details Fusion Medical Staffing is seeking a skilled Radiation Therapist for a 13-week travel assignment in Pomona, California. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • Successful completion of an accredited Radiation Therapy program, • One year of recent experience as a Radiation Therapist required, • Current ARRT Certification A Radiation Therapist administers targeted radiation therapy to treat cancerous tumors as prescribed by radiologists and oncologists. They position patients with precision, operate advanced radiation therapy equipment, and ensure patient safety by adhering to radiation protection protocols. Radiation Therapists play a key role in delivering compassionate care, monitoring patient responses, and collaborating with the healthcare team to achieve optimal outcomes. Essential Work Functions: • Position patients for treatment with accuracy, according to prescription to ensure effective treatment and minimize exposure to healthy tissue, • Administer prescribed doses of radiation to targeted body parts, using radiation therapy equipment according to established practices and safety protocols, • Perform regular equipment checks of radiation therapy equipment to ensure proper functionality and troubleshoot issues as needed, • Review prescription, diagnosis, patient chart, and identification to confirm accuracy and compliance with the treatment plan, • Follow radiation protection principles to ensure safety for patients, self, and others, • Maintain records, reports, or files required, including such information as radiation dosages, equipment settings, or patient's reaction, • Conduct treatment sessions independently, in accordance with long-term treatment plan and under the general direction of the patient's physician, • Enter data into computer and set controls to operate or adjust equipment or regulate dosage, • Observe and reassure patients during treatment and report unusual reactions to physician, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Radiation Therapist with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb11

Company: Fusion Medical Staffing Location: Facility in Pomona, California Job Details Fusion Medical Staffing is seeking a Med Surg/Tele RN for a 13-week travel assignment in Pomona, California. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent Med Surg/Tele RN experience, • Valid RN license in compliance with state regulations, • NIHSS certification, • ACLS (AHA / ARC) certification The Med Surg/Tele Registered Nurse delivers comprehensive high-quality, patient-centered care in medical-surgical and telemetry units. This role involves assessing patient health conditions, monitoring cardiac telemetry data, and collaborating with multidisciplinary teams to manage diverse patient needs. The position requires strong clinical skills in med-surg and telemetry nursing, critical thinking abilities, excellent communication, and a commitment to maintaining the highest standards of patient safety and professional ethics. Essential Work Functions: • Explain procedures and treatments to patients and families, addressing concerns and ensuring understanding, • Administer prescribed medications and treatments in adherence to nursing standards, • Conduct comprehensive assessments of patients’ conditions, documenting changes and reporting concerns to the care team, • Prepare patients for diagnostic procedures, assist physicians during treatments, and monitor patient responses, • Maintain a safe and comfortable environment for patients recovering from medical conditions or surgical procedures, • Document comprehensive patient information, including vital signs, medications, treatments, and care outcomes, in the medical record, • Collaborate with interdisciplinary teams, including physicians, physical therapists, and social workers, to create and implement individualized care plans, • Manage multiple patients efficiently, prioritizing care based on acuity and clinical needs, • Ensure infection control practices are strictly followed, including hand hygiene and PPE use, • Advocate for patients’ needs and preferences, ensuring they are respected and integrated into the care plan, • Facilitate discharge planning, coordinating with patients, families, and external resources to ensure a smooth transition from hospital to home, • Perform other duties as assigned within the scope of practice, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Med Surg/Tele RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb7

Company: Fusion Medical Staffing Location: Facility in Pomona, California Job Details Fusion Medical Staffing is seeking a skilled Home Health RN for a 13-week travel assignment in Pomona, California. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year of recent experience as a Registered Nurse, including a minimum of six months in a Home Health setting as an RN, • Proficient in OASIS documentation, • Valid RN license in compliance with state regulations, • Home Health Nursing Certification (RN-BC) A Home Health Registered Nurse (RN) delivers direct nursing care to patients in their homes, ensuring comfort, stability, and effective management of their medical conditions. Home Health RNs assess patient conditions, develop care plans, administer treatments, and educate patients and caregivers on disease management. Essential Work Functions: • Assess patient conditions and develop individualized care plans based on medical needs and physician directives, • Administer medications, treatments, and wound care while monitoring patient responses, • Provide patient and caregiver education on medication management, disease progression, and self-care techniques, • Monitor for changes in patient status, reporting concerns and adjusting care plans as needed, • Coordinate with physicians, therapists, and other healthcare professionals to ensure seamless care transitions, • Document patient care, interventions, and progress accurately and in compliance with regulatory standards, • Ensure compliance with infection control, safety, and home care best practices to protect patients and caregivers, • Support families and caregivers, offering guidance and emotional support throughout the care process, • Maintain communication with case managers and interdisciplinary teams to provide coordinated patient care, • Complete charting and documentation requirements while meeting visit and productivity goals, • Adhere to infection control, safety, and healthcare regulations, • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Home Health RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb7

Our Team is Kind of a Big Deal! UniFirst First Aid + Safety is seeking a reliable and hardworking Portable Fire Extinguisher Technician, “Fire Extinguisher Safety Specialist,” to join our family. As a Team Partner, your responsibilities will include conducting portable fire extinguisher and emergency/exit lighting inspection, service, repair, and maintenance, training team members in portable fire extinguisher and emergency/exit lighting inspection, service, repair, and maintenance. You will provide technical support to team members and help cover team members conducting inspections and service where, and as needed. The Partners role will also include selling and promoting fire services and products to help grow our existing customer base. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. Compensation: $55,000 - $65,000 annual salary, dependent on experience and skills plus a base commission structure plan! What's in it for you? Training: Our Team Partners receive ongoing cross-training, exposing them to different department areas. Cross training enhances performance and assists with career potential and advancement. Work Life Balance: We offer up to 40-hours a week! Career Growth: Some companies like to promote from within, We love to! Culture: Our family culture is what makes UniFirst First Aid + Safety an organization that stands out from the rest. Diversity: At UniFirst First Aid + Safety, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you'll be doing: • Conduct portable fire extinguisher and emergency/exit lighting inspection, service, repair, and maintenance, • Train team members in various portable fire extinguisher and emergency/exit Lighting service and inspection related tasks, • Provide portable fire extinguisher and emergency/exit lighting technical support., • Assist team members performing monthly and annual inspections on portable fire extinguishers and emergency/exit lighting to maintain compliance with NFPA 10 code when and where required., • Assist team members Inspecting and test emergency egress lighting and exit signs when and where required., • Providing customer onsite audits and quoting for fire service., • Presenting and demonstrating our fire related products/services to customers and working with the service department to ensure customer satisfaction., • Servicing, repairing and maintaining the portable fire equipment and emergency exit lighting systems of our established customer base where needed to cover team member vacations and time off. What we’re looking for: • High school and/or GED equivalent is required., • Must be at least 18 years of age or older., • Valid driver’s license and safe driving record is required, • Must have an NFPA Extinguisher Certification/License, • Experienced performing monthly and annual inspections on portable fire extinguishers to maintain compliance with NFPA 10 code., • Fire Extinguisher License or certification as required by state, county, and/or city., • Ability to work independently with minimal supervision., • Experienced in sales and upselling additional fire/safety-related products and services is highly preferred., • Strong customer service skills., • Ability to travel within the designated territory., • Excellent communication skills for internal and external scheduling., • Ability to lift up to 75lbs at certain times. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Job DescriptionThis Jobot Job is hosted by: Dana Stark Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $115,000 - $125,000 per year A bit about us: We provide a full range of integrated architectural and engineering services. With specialized in-house divisions and nationwide expertise across multiple industries, we deliver exceptional value and elevate design solutions to new heights. Why join us? Collaborative and innovative design culture. Exposure to a diverse range of structural projects. Opportunities for professional growth and continuing education. Competitive compensation and comprehensive benefits package. Job Details We are seeking a motivated and detail-oriented Structural Project Engineer with a Professional Engineer (PE) license to join our growing team. The ideal candidate will play a key role in the design, analysis, and management of structural projects across various sectors. Candidates with experience in educational (K-12 or higher education) facilities are strongly encouraged to apply. Key Responsibilities: Lead the structural design and analysis of new buildings, renovations, and additions using steel, concrete, masonry, and wood systems. Prepare construction documents, technical specifications, and calculations in compliance with applicable codes and standards. Coordinate with architects, MEP engineers, and contractors to ensure project accuracy and efficiency. Conduct site visits to observe construction, verify design intent, and resolve field issues. Manage project timelines, budgets, and deliverables to meet client expectations. Review and seal structural drawings and reports as the licensed engineer of record. Mentor junior engineers and drafters in design methods, code applications, and best practices. Provide technical support and value-engineering recommendations during all project phases. Qualifications: Bachelor’s or Master’s degree in Civil or Structural Engineering from an accredited program. Professional Engineer (PE) license required. 5–8 years of relevant experience in structural design and project coordination. Proficiency with design software such as Revit, ETABS, RISA, SAP2000, and AutoCAD. Solid understanding of IBC, ASCE 7, ACI, AISC, and NDS standards. Excellent communication, organizational, and problem-solving skills. Experience with school or educational facility projects is highly desirable. Why Join Us: Collaborative and innovative design culture. Exposure to a diverse range of structural projects. Opportunities for professional growth and continuing education. Competitive compensation and comprehensive benefits package. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Job Description Summary: The Clinical Research Nurse provides nursing standard of care in a research environment; Responsible for monitoring study participants, which includes collecting and reporting data on changes in their physical and mental status monitoring drug action and side effects, collecting lab sampling, dispensing, and accounting for investigational product assigned. Provides support to the clinical research coordinator in conducting inpatient portion of clinical trials; extent determined by experience, assignment of duties at the site delegation log, training, and license. Duties and Responsibilities: The Clinical Research Nurse: • Obtains, processes, and ships laboratory samples (e.g., blood, urine, etc.) as per protocol., • Assists and supports patient education on completion of diary, questionnaires and logs required in trial (if applicable), • Provides nursing standard of care in subjects admitted and seen in a clinical research setting, with the supervision of clinical research nurse-registered nurse (when applicable), • Ensures subjects’ safety and compliance with the protocol specific lifestyle guidelines., • Obtains and maintains intravenous access on subjects admitted., • Administers investigational product., • Assesses adverse events and drug reactions – seeks medical intervention for patients when appropriate., • Reports all adverse events (AEs), and serious or unexpected adverse events (SAEs) to the investigator and assisting the Investigator in reporting to the Sponsor/IRB all AEs/SAEs, as the protocol and regulations require, • Performs all protocol related procedures including, but not limited to vital signs, ECGs, phlebotomy, finger sticks, mouth swabs, spirometry, urine dipsticks, drug screens, pregnancy tests, etc., • Adequately documents study procedure collection via progress notes, adverse event information observed and/or reported along with procedures performed during clinical trial., • Obtains lab reports, procedure reports and ensure investigator reviews all lab results in form of full signature along with providing clinical significance to any out of range and/or abnormal value., • Dispenses and monitor allowed concomitant medication intake., • Dispenses and monitor cigarette intake., • Inventories of Medical supply, • Conducts Quarantine and recall procedures., • Maintains Crash cart inventory and contents., • Facilitates DRP and ER plans in the event of an emergency., • Attends Site initiation visits and/or training in-service for all protocols., • Maintains current Safe-t-pack biohazard training certification or IATA equivalent, (ACLS) advance life support certification, OSHA, and site’s SOP (SWP) training., • Has in-depth knowledge of company SOPs, ICH GCP guidelines and protocols assigned, specifically inpatient segment and safety criteria., • Assists in documentation of medical and surgical history, concomitant medication use, preliminary complaints, and lifestyle practices., • Documentation of inpatient activities, progress notes, adverse events observed and/or reported and performed during clinical trial., • Supports reinforcement of study restrictions, diets, and study guidelines, • Assists in obtaining lab reports, procedure reports and filing, specifically day -1 and/or unscheduled collected while inpatient., • Assists in preparation of collection tubes, vials, and study supplies for visits, including PK/PD set up., • Continuous observation and patient monitoring to ensure subjects’ safety and compliance with the protocol, restrictions, and specific guidelines., • Conducts assessment procedures as required by protocol (vital signs monitoring, electrocardiogram, etc.) under CRC and/or nurse supervision., • Maintains inpatient temperature Freezer, Refrigerator, and room logs., • Reports Temperature Excursions, • Occasional travel to Company sites, Principal Meetings, and/or Company meetings. Requirements: • Active Registered Nurse (RN) or Licensed Vocational Nurse (LVN) licensure., • Previous research experience and/or background are preferred., • ACLS certification for RNs, • Basic Cardiac Life Support, • GCP (Good Clinical Practice) – Must renew every 3 years, • Strong organizational and time management skills., • Excellent attention to detail and ability to maintain accurate records., • Effective communication skills, both written and verbal., • Ability to work independently and collaboratively in a team environment., • Understanding of ICH/GCP guidelines for human research, • Understanding of Code of Federal Regulations for Human Subject, • Computer Competency in Electronic Data Capture, • Understanding Phases I-IV drug development process., • Prolonged periods of sitting at a desk and working on a computer, • Must be able to lift 20 pounds at a time., • Exposure to human bodily fluids., • Laboratory Processing Procedures., • Subject/Patient Care, • Mid-level Computer use., • Weekend work schedules as needed., • Work is normally performed in a typical interior clinical/office environment., • Travel to sponsor required meetings as needed.

Job Description Aerospace company looking for entry-level people in all shop departments. No experience is necessary – just a great attitude, solid work ethic, and desire to learn. Generous benefits package including medical, dental, life, and a matching 401 (k). Must be able to pass pre-employment physical and DOT-mandated drug test. Build a career and discover why most of our team members have been with us for 10-20 years! Math and organization skills are beneficial for growth. We are looking for career-minded individuals who want to grow with our team. Many entry-level positions are available. Bring a positive attitude and a desire to grow and build a career. We will invest our time and energy to help you achieve your goals. Immediate opportunity in our blending and routing department. While maintaining strict tolerances, you will learn to blend sheet metal for commercial and military aircraft, including rocket engine parts and classified programs. PAC is a family-owned aerospace company known for its commitment to quality, innovation, and investing in its people. Many of our team members have been with us for over 10–20 years, a testament to our culture and stability. No experience? No problem. If you bring the right attitude and work ethic, we'll provide the training and support. Key Responsibilities: • Start in general labor with the opportunity to grow into a prominent role as a team lead, • Maintain cleanliness and safety in designated work areas, • Take direction and communicate effectively with team leads and supervisors, • High school diploma or equivalent (Required), • Reliable, punctual, and ready to work as part of a team, • Willingness to learn technical skills and safety procedures, • Frequent standing, walking, bending, kneeling, and movement around the facility, • Work conditions may include exposure to:, • Loud noise (earplugs provided), • Hazardous chemicals (PPE and training provided), • Temperature extremes (cold winters, hot summers), • Wet and dirty areas in the Chemical Milling zone—housekeeping and awareness required, • Hourly Rate: $17.00 – $22.00 per hour (based on experience), • Shifts Available:, • 4:00 AM – 12:30 PM (Mon–Fri), • Medical, dental, and vision insurance, • 401(k) with company match, • Life insurance, • Opportunities for internal promotion and skill development We don’t just offer jobs—we build careers. Whether you're just starting out or looking for a fresh opportunity in a stable industry, PAC offers a place to grow. We value attitude, effort, and reliability. If you’re ready to roll up your sleeves and learn, we’ll invest in your success. Company DescriptionFamily-owned and operated since 1989. Lots of room to grow in a thriving business.Family-owned and operated since 1989. Lots of room to grow in a thriving business.

Job Description Aerospace company looking for entry-level people in all shop departments. No experience is necessary – just a great attitude, solid work ethic, and desire to learn. Generous benefits package including medical, dental, life, and a matching 401 (k). Must be able to pass pre-employment physical and DOT-mandated drug test. Build a career and discover why most of our team members have been with us for 10-20 years! Math and organization skills are beneficial for growth. We are looking for career-minded individuals who want to grow with our team. Many entry-level positions are available. Bring a positive attitude and a desire to grow and build a career. We will invest our time and energy to help you achieve your goals. Immediate opportunity in our blending and routing department. While maintaining strict tolerances, you will learn to blend sheet metal for commercial and military aircraft, including rocket engine parts and classified programs. PAC is a family-owned aerospace company known for its commitment to quality, innovation, and investing in its people. Many of our team members have been with us for over 10–20 years, a testament to our culture and stability. No experience? No problem. If you bring the right attitude and work ethic, we'll provide the training and support. Key Responsibilities: • Start in general labor with the opportunity to grow into a prominent role as a team lead, • Maintain cleanliness and safety in designated work areas, • Take direction and communicate effectively with team leads and supervisors, • High school diploma or equivalent (Required), • Reliable, punctual, and ready to work as part of a team, • Willingness to learn technical skills and safety procedures Frequent standing, walking, bending, kneeling, and movement around the facility * Work conditions may include exposure to: * Loud noise (earplugs provided) * Hazardous chemicals (PPE and training provided) * Temperature extremes (cold winters, hot summers) * Wet and dirty areas in the Chemical Milling zone—housekeeping and awareness required * Reasonable accommodations may be made for individuals with disabilities Compensation: * Hourly Rate: $17.00 – $22.00 per hour (based on experience) * Shifts Available: • 4:00 AM – 12:30 PM (Mon–Fri) Overtime available and may be required when necessary. Benefits: * Medical, dental, and vision insurance * 401(k) with company match * Life insurance * Opportunities for internal promotion and skill development * Stable, long-term employment in a growing industry Why Join PAC? We don’t just offer jobs—we build careers. Whether you're just starting out or looking for a fresh opportunity in a stable industry, PAC offers a place to grow. We value attitude, effort, and reliability. If you’re ready to roll up your sleeves and learn, we’ll invest in your success. Company DescriptionFamily-owned and operated since 1989. Lots of room to grow in a thriving business.Family-owned and operated since 1989. Lots of room to grow in a thriving business.

Job Description The Senior Plant Manager is responsible for achieving the short-to-mid strategic objections while managing the P&L for production, maintenance, customer service, and supply chain. Directly reporting to the General Manager to maximize processes effectiveness, readiness, synergies and standardization; ensuring high-level efficiency; minimizing costs; acting in line with the applicable standards, regulations, global manufacturing practices, and Corporate & Local procedures. Key responsibilities: OPERATION MANAGEMENT (Production, Maintenance, Supply Chain, Customer Service) • Leads the functions assigned, sets goals in terms of costs, time, quality, manages assigned resources, systems and processes, working with enabler functions, delivering results in line with requirements and level of services, standards, targets, regulatory and procedures., • Defines and monitors the production plans execution in terms of time, volumes, mix, quality and costs, reviewing and approving the local ones, according to production leaders., • Provides effective technical resolutions for reducing complaints, increasing services, and sales demand fulfilment., • Participates in strategy execution of objectives by translating it into actionable plans., • Ensures effective running of processes, business continuity and compliance in line with ISO standards, regulatory, procedures and program, enables continuous improvement mindset, processes harmonization, in coordination with involved functions., • Engineering Degree (Bachelor/Master) or equivalent., • Knowledge of Product and Production: process and features techniques., • Continuous Improvement management: techniques, methodologies and tools knowledge (Lean Management and Six Sigma)., • Data Analysis and performances operations metrics: methodologies, techniques, tools and applications (KPI)., • System (ERP, IQMS), tools and application for the relevant processes., • Knowledge of applicable standards such as ISO (9001, 13485), cGMP, FDA, CFR, OHSAS.

Job Description QAI Job Number: QAI-ENGGBP-RAN-07032025 JOB TITLE: Project Specialist – Building Products LOCATION: Rancho Cucamonga, CA NUMBER OF POSITIONS: 1 CATEGORY: Construction Materials/Door and Windows SALARY RANGE: $55,000 - $85,000 per year BACKGROUND: QAI Laboratories Ltd. (QAI) is a multi-national professional certification body, test laboratory, and inspection agency with offices throughout North America and Asia. Recognition of the QAI name and logo have grown significantly over the past few years resulting in significant expansion of the business. We are looking for a talented, hardworking, dedicated person to join our growing team. The successful candidate for the Project Specialist position will join our growing Building Products team and support future expansion. DUTIES: The successful candidate will perform, but not be limited to the following duties: • Maintains a high level of technical competence in the subject field., • Maintains a high level of technical competence in the field of testing, inspection and/or certification to ensure validity of test results., • Conduct unsupervised testing, inspection or evaluation, data analysis and report preparation., • Assists supervisor or manager in the supervision of testing, data analysis and test report preparation., • Deals directly with clients to understand the scope of work and ensure work is carried out properly and on schedule., • Arranges inter-company or contracted work and creates necessary PO requests, • Ensures resources are available for projects, • Keeps clients updated on project milestones., • Review test reports and documentation for compliance, • Has responsibility for ensuring assigned projects are completed as scheduled., • May have overall responsibility of completing certification files for review, • Scope of technical authority shall be limited by the level of authorization as shown in the competency matrix, • Ability to explain technical concepts, standard requirements and QAI processes to clients, • Ability to read, understand and interpret standards. Seeks assistance from the technical manager when needed., • Must be willing to be part of an energetic team with a can-do attitude., • Other duties as assigned by the manager or its designee. QUALIFICATIONS: The successful candidate will: • Possess a Bachelor’s degree in a related engineering discipline or equivalent experience., • 3+ years related experience. Recent graduates are welcome to apply., • Possess the ability to read, understand, and apply technical standards towards product certification, testing, and inspection., • Advanced knowledge of US and Canadian building codes and referenced nationally recognized safety standards is a plus., • Possess superior MS Word and Excel skills, be proficient with Email and Adobe Acrobat., • Possess “Good Laboratory Practice” skills essential for testing products., • Possess good interpersonal and communication skills. Key Technical Competence: • Able to perform simple and complex testing, more complex test setups and explain results with a high degree of knowledge to clients and others within the organization., • Good working knowledge of the test methods in their specific discipline., • Able to apply general knowledge in a discipline to various testing methods, even unfamiliar test methods and develop a plan to complete projects., • Able to multi-task with a high degree of efficiency and accuracy., • Maintains a sense of ownership and responsibility for projects assigned to them., • Able to coordinate projects across departments or across the organization to ensure customer satisfaction. ADDITIONAL INFORMATION: • Candidates must hold a valid driver’s license., • Candidates must hold a valid passport, or be able to obtain a valid passport, and must be able to travel to Canada and other international destinations. Additional Assets include: • Forklift experience, • Previous experience with construction materials and windows/doors compliance practices in the US and Canada Join our Team! Learn, Develop, Grow! At QAI, you will have the opportunity to put your aptitude, experience, knowledge, and desire to learn to the test. We make a difference in people’s lives through the work we do as a top-notch Product Testing, Certification, and Inspection body whilst providing rewarding careers for our employees. APPLYING: QAI Laboratories offers a generous compensation and benefits package including base salary and bonus/commissions, medical, dental, and other perks. We are committed to the long-term success of our employees. We thank all applicants in advance for their interest; however, only those under consideration will be contacted. You can also check other career opportunities on our careers page. Equal Opportunity Employer QAI Laboratories is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Note: No sponsorship is available.

Job Description Project Manager II (Engineering) PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. The position is in Pomona, CA. Hybrid-Remote (Tuesday and Wednesday in the office/field) Become a Project Manager at one of the largest utility companies in Southern California managing electric infrastructure projects. In this job, you’ll be part of the Construction & Technical Support (C&TS) organization and will directly collaborate with the company's customers and internal groups. This organization provides project and program management for Transmission and Distribution. The volume of transmission projects is projected to continue to grow over the next several years. These projects are growing in number, size, complexity, and strategic impact. Due to the high visibility of these projects by regulators, public and environmental agencies, and major customers, they must be managed consistently and carefully. The primary purpose of the Project Manager role is to improve the success rate of projects by applying project management principals, methods, tools, and standards. Individuals are typically certified as Professional Project Managers and apply their knowledge and experience in a variety of functions and projects across the organization. As a Project Manager, your work will help power our planet, reduce carbon emissions, and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future? A day in the life - Get ready to think big, work smart and shine bright! • Manages projects and programs within the organization: Projects and programs may include relocation of existing facilities, and small civil capital projects., • Responsible for project cost management related to budgeting, forecasting, and trends., • Manages 5-10 active projects and coordinate contractors and material., • Coordinate activities, resources, equipment, and information necessary for project completion, maintaining project plans, reports, and technical documents, and serving as a point of contact for the project team ensuring effective communication and team coordination., • Lead planning, monitoring, and management of internal projects including complex, multi-year initiatives within and across OUs such as Finance, Regulatory, HR, Engineering, Transmission & Distribution, Legal, Customer Support, and Administrative Services as well as construction projects, infrastructure investment, and new facilities from initiation through completion., • Updates project documentation data in files and multiple software systems. Requests, receives, evaluates, and prioritizes data into hard files, Microsoft software programs, etc., • Initiates and issues documentation including Authorization to Proceed (ATP), Release to Construct (RTC), letters, agreements, contracts, trends, work order requests, etc. as the need arises., • Lead development of project, resource, and staffing plans, secure required resources, track, and report on progress, troubleshoot issues and ensure project results meet requirements regarding technical quality, reliability, schedule, cost, and regulatory requirements., • Monitor performance and recommend schedule changes, cost adjustments or resource additions including determining how changes will impact status, budget, and timeline., • Evaluates submittals, letters, plans project / program files for completeness with associated processes and procedures., • Upon completion of projects follow associated processes and procedures associated with closeout and reconciliation., • Schedules and leads internal and external meetings with associated agendas, meeting minutes, action items. The essentials: • Bachelor’s Degree in Engineering required., • Seven years of Project Management experience including ownership of scope, cost, and schedule., • Ability to lead multiple sophisticated projects in a fast-paced environment with minimum supervision and tight time constraints. The preferred: • Experience with transmission, distribution, and/or substation line construction, maintenance, or operations regulations., • Utility Industry experience preferred., • Experience working as a resident engineer to oversee drawings that need to be issued., • Experience communicating and collaborating effectively with external clients, various organizations across SCE, and all levels of management to lead and drive projects., • Experience working with all Microsoft office programs, SAP, Design Manager (DM), Google Earth Pro, and Adobe Acrobat Pro.

Job Description Project Manager II & III PM2CM, Inc., (Project Management to Construction Management) is a professional services company dedicated to providing Program and Project Management, Construction Management and Project Controls services during the design and construction phase of projects. Our core expertise is in Project Controls which includes Scheduling, Cost Controls, Document Management and Controls, Budget tracking and monitoring, Estimating, Risk Analysis, Claims avoidance and Mitigation, Change Management and Earned Value Management. The position is in Pomona, CA. Hybrid-Remote (Tuesday and Wednesday in the office/field) Become a Project Manager at one of the largest utility companies in Southern California managing electric infrastructure projects. In this job, you’ll be part of the Construction & Technical Support (C&TS) organization and will directly collaborate with the company's customers and internal groups. This organization provides project and program management for Transmission and Distribution. The volume of transmission projects is projected to continue to grow over the next several years. These projects are growing in number, size, complexity, and strategic impact. Due to the high visibility of these projects by regulators, public and environmental agencies, and major customers, they must be managed consistently and carefully. The primary purpose of the Project Manager role is to improve the success rate of projects by applying project management principals, methods, tools, and standards. Individuals are typically certified as Professional Project Managers and apply their knowledge and experience in a variety of functions and projects across the organization. As a Project Manager, your work will help power our planet, reduce carbon emissions, and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future? A day in the life - Get ready to think big, work smart and shine bright! • Manages projects and programs within the organization: Projects and programs may include relocation of existing facilities, and small civil capital projects., • Responsible for project cost management related to budgeting, forecasting, and trends., • Manages 5-10 active projects and coordinate contractors and material., • Coordinate activities, resources, equipment, and information necessary for project completion, maintaining project plans, reports, and technical documents, and serving as a point of contact for the project team ensuring effective communication and team coordination., • Lead planning, monitoring, and management of internal projects including complex, multi-year initiatives within and across OUs such as Finance, Regulatory, HR, Engineering, Transmission & Distribution, Legal, Customer Support, and Administrative Services as well as construction projects, infrastructure investment, and new facilities from initiation through completion., • Updates project documentation data in files and multiple software systems. Requests, receives, evaluates, and prioritizes data into hard files, Microsoft software programs, etc., • Initiates and issues documentation including Authorization to Proceed (ATP), Release to Construct (RTC), letters, agreements, contracts, trends, work order requests, etc. as the need arises., • Lead development of project, resource, and staffing plans, secure required resources, track, and report on progress, troubleshoot issues and ensure project results meet requirements regarding technical quality, reliability, schedule, cost, and regulatory requirements., • Monitor performance and recommend schedule changes, cost adjustments or resource additions including determining how changes will impact status, budget, and timeline., • Evaluates submittals, letters, plans project / program files for completeness with associated processes and procedures., • Upon completion of projects follow associated processes and procedures associated with closeout and reconciliation., • Schedules and leads internal and external meetings with associated agendas, meeting minutes, action items. The essentials: • Bachelor’s degree in business administration, Engineering or Construction Management., • Seven to ten years of Project Management experience including ownership of scope, cost, and schedule., • Experience with transmission, distribution, and/or substation line construction, maintenance, or operations regulations., • Utility Industry experience preferred., • Experience working as a resident engineer to oversee drawings that need to be issued., • Experience communicating and collaborating effectively with external clients, various organizations across SCE, and all levels of management to lead and drive projects., • Experience working with all Microsoft office programs, SAP, Design Manager (DM), Google Earth Pro, and Adobe Acrobat Pro.

Job DescriptionCivil / Structural Project Manager — Electric Substations Location: Greater Los Angeles area (periodic fieldwork and office/hybrid) Summary: Lead civil/structural engineering for electric substation projects. Responsible for technical design, contractor oversight, construction support, and ensuring projects meet schedule, cost and quality targets. Works closely with field crews, vendors, regulators and internal stakeholders. Key responsibilities • Lead civil/structural engineering design, calculations, detailing, and CAD drafting for substation structures and foundations., • Prepare and review engineering deliverables: calculations, construction drawings, specifications, and reports., • Perform periodic site visits and construction inspections; provide hands-on construction support and as-built verification., • Manage and coordinate design contractors and third-party consultants to ensure quality, schedule and budget compliance., • Identify technical and schedule risks; develop mitigation plans and track corrective actions., • Participate on and sometimes lead multidisciplinary project teams; set objectives, milestones and deliverables., • Provide mentoring, training, and technical direction to junior engineers and drafters., • Ensure compliance with applicable regulations, codes, standards, and company engineering practices., • Communicate effectively with internal and external stakeholders; maintain professional relationships and exercise diplomacy in conflict resolution., • Track multiple concurrent projects; prioritize workloads to meet deadlines. Requirements Required qualifications • Bachelor’s degree in Civil Engineering or Structural Engineering (or equivalent)., • Minimum 5 years’ structural engineering experience (preferably including substation/utility projects)., • Experience working on electric substation or utility civil/structural projects., • Proficiency in AutoCAD, Microsoft Office, and Microsoft Teams. We offer a comprehensive benefits package that includes 120 hours of paid time off annually, ten paid holidays, a 3% 401(k) company match, profit sharing opportunities, and the flexibility to work remotely up to three days per week.

Job Description PSC Biotech provides the life sciences with essential services to ensure that health care products are developed, manufactured, and distributed to the highest standards, in compliance with all applicable regulatory requirements. Our goal is to skyrocket our clients’ success, and you can be a part of our team’s achievements. Employing a global team of skilled professionals and experts that span across strategically located offices in North America, Europe, Asia and the Middle East, we are proud of the roles we have fulfilled to help our clients achieve success. The Experience With operations spanning the globe and featuring a multi-cultural team, PSC Biotech® is passionate about bringing the best and brightest together in an effort to form something truly special. When you make the decision to join our team, you will be offered the ability to feel inspired in your career, explore your professional passions, and work alongside a group of people who will value and nurture your talents. We are firm believers in coaching and developing the next generation of industry leaders and influencers. As such, you will not only be offered compensation and benefits structure that rewards you, but also be provided with the tools that will help you grow and learn. At PSC Biotech®, it’s about more than just a job—it’s about your career and your future. Your Role We are hiring a Senior CQV Project Manager to deliver comprehensive support throughout every stage of the CQV lifecycle. This role offers expert guidance in project planning, strategic development, and execution, employing a risk-based methodology to ensure adherence to regulatory standards and the highest levels of product safety. • Lead and manage CQV engineers and contractors throughout project execution., • Oversee commissioning and startup of new equipment, utilities, and cleanroom systems., • Develop and approve IQ/OQ/PQ protocols for newly installed systems and equipment., • Prepare, review, and maintain documentation, including validation protocols, plans, reports, and SOPs., • Support risk assessments and mitigation strategies related to CQV activities., • Ensure timely execution of PPQ testing and validation deliverables., • Coordinate with vendors and contractors to support hand-offs and system turnover., • Ensure compliance with regulatory requirements (FDA, EMA) and industry standards (GMP, GAMP)., • Provide technical oversight during validation execution and qualification activities., • Additional responsibilities as required. Requirements • Bachelor’s degree in Engineering, Life Sciences, or related field., • 7–10 years of project management experience in pharmaceutical and/or biotech industries., • Proven experience leading CQV activities during new facility build outs, including equipment installation and startup., • Strong background in aseptic fill-finish operations, cleanroom facilities, process equipment, and utility systems., • Familiarity with project execution and project management tools (MS Project, Smartsheet)., • Deep understanding of regulatory requirements and industry standards (GMP, GAMP, FDA, EMA)., • Knowledge of validation lifecycle and risk-based approaches., • Excellent analytical and technical problem-solving skills., • Strong technical writing skills and experience with validation documentation (protocols, reports, procedures)., • Effective communication and interpersonal skills., • Organized, proactive, and detail-oriented with a commitment to quality and compliance., • Must be authorized to work in the U.S, • No C2C at this time Benefits • Offering a full suite of benefits, PSC Biotech™ is firmly focused on diligently investing in our employees who enable our company to fulfill our mission and achieve success. We want to promote balance, so you not only enjoy your work, but also have the time and resources to live your life happy and healthy., • Medical, Dental, and Vision - PSC pays 100% of all qualifying employee medical premiums and 50% for qualifying dependents, • Insurance options for Employee Assistance Programs, Basic Life Insurance, Short/Long Term Disability and more., • 401(k) and 401(k) matching, • PTO, Sick Time, and Paid Holidays, • Education Assistance, • Pet Insurance, • Discounted rate at Anytime Fitness, • Financial Perks and Discounts Adhering to the requirements of California's law on salary transparency, the salary bracket for this role is set between $120,000 – $140,000 annually. The offered salary may be adjusted based on various factors such as the applicant's qualifications, skills, and professional experience. Equal Opportunity Employment Statement PSC is committed to is committed to a policy of Equal Employment Opportunity with respect to all employees, interns, and applicants for employment. Consistent with this commitment, our policy is to comply with all applicable federal, state and local laws concerning employment discrimination. Accordingly, the Company prohibits discrimination against qualified employees, interns and applicants in all aspects of employment including, but not limited to: recruitment, interviewing, hiring (or failure or refusal to hire), evaluation, compensation, promotion, job assignment, transfer, demotion, training, leaves of absence, layoff, benefits, use of facilities, working conditions, termination and employer-sponsored activities and programs, including wellness, social and recreational programs. Employment decisions will be made without regard to an applicant’s, employee’s, or intern’s actual or perceived: race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age (40 or older), disability, genetic information, or any other status protected by law. #LI-TP1

Field Service Technician I US-CA-Ontario Job ID: 33641 Type: Full-Time of Openings: 1 Category: Field Service CA - Ontario About the Role If finding an effective fix and supporting customers with the highest level of service standards sounds appealing to you, Canon USA, a leader in technology, solutions, and services, wants to know your story. We’re actively seeking a Field Service Technician to deliver amazing experiences and elevated efficiency within the routine maintenance of Canon-supported products in accordance with Service and Parts Standards. Your Impact In this position, you’ll be accountable for: • Reporting to your manager product failure trends and serviceability issues with necessary supported documentation, ensuring accurate information and record keeping., • Meeting customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance., • Properly maintaining all technical information, Field Service Reports, Expense Reports, and Canon property assigned., • Showcasing strong customer communication and satisfaction skills., • Maintaining the performance of assigned machines., • Facilitating performance at a level which helps to achieve the branch/district’s overall metric targets. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. Do you meet these requirements? • Hold a High School diploma or equivalent experience required., • Possess a basic understanding of internet environments and the ability to successfully complete the 120-day introductory period and the PDIF (Printing and Digital Imaging Foundations) new-hire class., • Ability to travel (valid driver's license and acceptable driving record necessary)., • Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises., • Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). In accordance with applicable law, we are providing the anticipated rate for this role: $19.00 - 26.31 hourly. This role is eligible for a transportation allowance. Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at ___ and connect with us on LinkedIn at ___. Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at ___ We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site ___, we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at ___. #CUSA Posting Tags #PM19 #LI-FL1 PI24c2f0235694-37820-38801756

Job DescriptionCompany Description Company Description: Monro’s family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company’s regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America’s leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We’re looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! Job Description About the Role: The Technician role is full time or part-time and is an hourly position based on needs of the business. The Technician is primarily responsible for conducting basic vehicle diagnostics and performing routine vehicle repair and maintenance services in accordance with company standards and manufacturer specifications. This position is expected to deliver exceptional 5 Star service to our guests, through effective communication of vehicle issues and proposed solutions, as well as consistently meeting guest expectations for time commitments and quality. Salary Range: $17.00 - $22.00 per hour FRU Rate: $28 to $35. Responsibilities: • Perform basic vehicle diagnostics to properly identify required repairs., • Consistently complete Monro’s Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs; Audit courtesy inspections performed by the General Service Technicians, • Assist in inventory management to include pulling tires and parts, unloading and stocking inventory., • Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition., • Consistently perform service(s) in accordance with Monro’s safety standards including but not limited to Monro’s Wheel Torque, Oil safety and compliance procedures, • Test drive vehicles in accordance with Monro’s Road Test policy, including consistently utilizing our dedicated test drive routes, while maintaining all local traffic and safety laws, • Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures., • Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules., • Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc., • Perform other duties as assigned and required. Qualifications Qualifications: • High School Diploma or equivalent., • Automotive training including basic car maintenance and repair or the equivalent combination of education and experience., • ASE certification and State Inspection license (where applicable) preferred., • Must possess a current valid driver’s license and have a satisfactory Motor Vehicle Report (MVR), • Capable of performing basic automotive maintenance, repair, and tire services, • Ability to diagnose problems identifying root cause and determine appropriate repair solution., • Ability to interpret and execute instructions furnished in written, oral, and diagram formats, • Strong customer service skills This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. Technicians must be able to complete the following but not limited to: • Ability to work flexible hours, days, evenings, weekends, and holidays., • Must be able to see, hear, lift, carry, and stock merchandise and supplies up to 50 lbs. without assistance., • Frequent standing and walking for long periods of time., • Frequent reaching overhead and below the knees, including squatting, bending, stooping, kneeling, and twisting. Additional Information Benefits: • Performance based incentives, • Paid vacation and holidays for Full-Time Teammates, • Reimbursement for ASE Certifications, • Reimbursement for State Inspection Licenses, where applicable, • 401k eligibility immediately upon hire, • Direct Deposit, • Employee Discounts, • Healthcare, Vision, and Dental for Full time teammates, • Employee Access Perks, • Career Advancement Opportunities This summary is not an all-inclusive description of job duties. Other job duties and responsibilities may also be assigned by the incumbent’s supervisor at any time based upon the Company’s needs. Monro Inc. is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state, or local law. Your next Destination! Growth Opportunity: At Monro we’re committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Job DescriptionWinnCompanies is seeking a motivated Maintenance Technician I to join our team at The Grove, a 101-unit residential community located in Ontario, CA. In this role, you will perform maintenance functions in the community, including rental units, residential common areas, office, grounds and parking lots. The pay range for this role is $24.00-$26.00 per hour dependent on experience. The selected candidate will also adhere to the following schedule: Monday through Friday, from 8:00AM-5:00PM.Responsibilities • Perform repairs in such areas as, but not limited to, appliances, carpentry, hardware accessories, masonry, painting and basic electrical, plumbing and HVAC., • Complete assigned service requests and repairs consistent with company operating procedures., • Assist in preparing vacant apartments for market ready status in accordance to company standards., • Maintain grounds and curb appeal through snow removal, landscaping and trash management activities., • Be available for on call activity during off hours and emergencies based on a pre-determined schedule and need.Requirements, • High school diploma or GED equivalent., • 1+ years of relevant work experience., • General knowledge of electrical, plumbing, appliances, HVAC and/or carpentry., • Excellent customer service skills., • Good communication and interpersonal skills., • Basic familiarity with computers and tablets., • Availability for on-call activity during off hours for urgent needs., • Ability to work with a diverse group of people and personalities.Preferred Qualifications, • Vocational or technical training.

Job Description The General Maintenance Engineer is responsible for performing a variety of maintenance tasks to ensure the efficient operation and upkeep of buildings, equipment, and systems. This role involves troubleshooting, repairing, and maintaining mechanical, electrical, plumbing, and HVAC systems, as well as conducting routine inspections and preventive maintenance.Pay: $24.00The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit ABM Team Member Benefits \u007C ABM Employee Benefits \u007C Front Line Team Members \u007C (Programa de Beneficios de ABM) Job Summary:The General Maintenance Engineer is responsible for performing a variety of maintenance tasks to ensure the efficient operation and upkeep of buildings, equipment, and systems. This role involves troubleshooting, repairing, and maintaining mechanical, electrical, plumbing, and HVAC systems, as well as conducting routine inspections and preventive maintenance.Key Responsibilities:Perform routine inspections and preventive maintenance on building systems and equipment. Diagnose and repair mechanical, electrical, plumbing, and HVAC issues. Respond promptly to maintenance requests and emergencies.Maintain accurate records of maintenance activities and repairs. Ensure compliance with safety regulations and company policies. Collaborate with other departments and contractors as needed. Assist in the setup and breakdown of equipment for events or operational needs. Monitor inventory of tools, supplies, and spare parts; request replenishments as necessary.Qualifications:High school diploma or equivalent; technical certification or vocational training preferred. Proven experience in general maintenance or engineering roles. Strong knowledge of building systems including HVAC, electrical, plumbing, and mechanical. Ability to read blueprints, technical manuals, and schematics. Excellent problem-solving and time management skills. Ability to work independently and as part of a team. Physical stamina and dexterity to perform manual tasks and lift heavy equipment.Work Environment:May involve working in various indoor and outdoor settings. Requires flexibility to work evenings, weekends, or on-call shifts as needed. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide — including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive — we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at . Job Description This role is on C Shift, 12am-8am. All interested individuals are encouraged to apply for this position. Those currently in the same department (Coating, Finishing, Shipping, etc.) at the hiring location will receive first consideration. They will be reviewed in accordance with the US Hourly Job Bid Policy and evaluated via our shift alignment process. Eligible and qualified applicants outside of the department will be given consideration and invited to interview for the position if there are no selected candidates via the shift alignment process. Further details regarding the job bid policy can be found in ad.a. Please discuss this opportunity with your manager prior to completing an application. Our typical recruiting process takes 2-4 weeks, depending on the current hiring volume and number of applicants. • Locating and diagnosing failures, replacing defective components, and performing basic troubleshooting using standard equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals, and verbal and/or written instructions., • Repairing and maintaining machinery and mechanical equipment such as pneumatic tools, motors, conveyor systems and production machines and equipment using testing instruments, hand and power tools and precision-measuring instruments., • Performing a wide variety of functions such as installation, maintenance, and repair of equipment for generating, distributing, and utilizing electrical energy. Uses instruments to test circuits and replaces or installs new power, light, electronic and control circuits., • Troubleshooting electrical malfunctions, inspecting circuits and wiring for shielding and grounding, and testing electrical equipment for safety and efficiency., • Repairing complex electrical equipment, including motors, switches, switchboards, electrical mechanisms, automated machines, controls, panels, relays, circuit breakers, communication systems and alarms., • Working from schematics, drawings, layouts, or other specifications to locate and diagnose trouble in the electrical system or equipment., • Improvising acceptable fixes to get equipment running promptly., • Assisting engineers in diagnosing problems and suggesting corrective action., • Properly inspecting and maintaining shop equipment, in accordance with OSHA regulations., • Preparing new machines and production equipment for operation., • Following a strict preventive maintenance schedule to lessen exposure to downtime related to repairs and maintenance., • Maintaining a clean, organized and safe shop and production floor., • Consistently working in a safe manner with regard to self, co-workers, and manufacturing systems., • Performing general housekeeping tasks and waste removal within department/group and assists other areas as required., • Continuously reviewing current processes and searches out improvement methods to improve product/process quality and reduce waste, rework, and unnecessary work that adds no value to the work or process., • Assisting and supporting other team members in meeting department and site goals., • Contributing and participating in team decision making. Provide support in project work and other special requests. -High School Diploma or equivalent required. • 3-5 years previous experience required. -Certifications in speciality area required as applicable. Or acquire within specified timing any licensures necessary to perform the job. -Good interpersonal skills, mathematical aptitude, mechanical/technical skills and aptitude and logical problem solving skills necessary. -Good verbal and written communication. • Able to work in fact-paced environment with a highly participative work system., • Ability to work independently in a safe and timely manner necessary., • Must be motivated towards productivity improvements, safety and quality awareness. The hourly rate for this position is $24.96-$31.62 / hour. The hiring wage rate range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range. In some circumstances, this may be above or below the range (based on various factors, including, but not limited to, a candidate’s relevant skills, experience, education and training, location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position). That may change, depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable laws. Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact (440) 534-6000 or to discuss reasonable accommodations.

Job DescriptionTHE ROLE: • This position will report to the: Plant Supervisor, • Travel Requirement: None, • Location: Rancho Cucamonga, CA, • FLSA Status: Non-Exempt, • Shift: 3rd shift - 10:00pm to 6:30am, • Employment Category: Full Time - Regular, • Pay Range: $34.50-$41.25/hr Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Evolution Fresh and our joint venture with Sambazon. Bolthouse Farms is the preeminent provider of chilled juice, smoothies, and protein drinks. Evolution Fresh - is the premier, cold-pressed juice brand and maker of the new Real Fruit Soda. Through our integrated partnership with Sambazon we produce and sell their high-quality Açaí beverages. Formerly known as Bolthouse Farms – Generous Brands was born out of the independence from its carrot operations and is poised to be the “World’s Largest Beverage Start-Up.” Currently we have 1000 employees located across the country at our hubs/facilities in Bakersfield, CA, Rancho Cucamonga, CA & Chicago, IL. You can connect with our brands on their socials - Bolthouse Farms (LinkedIn, Instagram and TikTok ) and Evolution Fresh (LinkedIn, Instagram and TikTok). WHAT YOU’LL BE RESPONSIBLE FOR IN THIS ROLE This job contributes to Evolution Fresh success by ensuring that plant equipment is repaired and maintained in a timely manner. Models and acts in accordance with Evolution Fresh guiding principles. • Assists maintenance team and supports all aspects of the maintenance department as needed, including general building and grounds maintenance, • Assists with the installation of all new equipment, • Completes plant work orders, part lists, and preventive maintenance, • Ensures all plant equipment is functioning at optimum levels by performing short-term repairs and long-term improvements, • Completes tasks thoroughly and accurately to ensure compliance with quality standards and regulatory, • requirements, • Understands and follows established safety guidelines, programs, and procedures; and actively works to prevent safety incidents, • Supports food safety, legality, and quality programs, • Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures, • Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values, • Maintains regular and consistent attendance and punctuality WHAT WE’RE LOOKING FOR MINIMUM QUALIFICATIONS: • High School/GED or one to two years’ experience in related field or combination of both education and experience, • Automated manufacturing or distribution environment (5 years), • General industrial maintenance and electrical systems (5 years) ADDITIONAL REQUIRED QUALIFICATIONS: • Ability to work variable shifts to support business needs, • Ability to work in accordance with safety, quality and sanitation standards, policies and procedures, • Ability to communicate technical and operational issues clearly and concisely, • Ability to communicate clearly and concisely, both orally and in writing, • Ability to troubleshoot electrical and mechanical plant equipment, • Ability to understand mechanical and technical equipment manuals, • Ability to work in elevated areas with ladders, roofs, overhead lights, • Ability to work independently and make decisions with minimal supervision, • Basic math skills, • Knowledge of welding, plumbing, and machining, • Attention to detail, • Ability to plan and prioritize workload PREFERRED QUALIFICATIONS: • Experience repairing and maintaining high speed packaging equipment (2 years), • Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (21 CFR 117) and the Global Food Safety Initiative (GFSI). Experience with BRC or SQF certification schemes. PHYSICAL DEMANDS: • O = Occasional (up to 25% of time), • F = Frequent (26%-74% of time), • C = Constant (75% or more of time), • Ability to lift up to 50lbs WHAT WE OFFER Our rich benefits packages are designed to support the health and well-being of both our eligible co-workers and their families. • Medical, • Dental, • Vision, • Group Life and AD&D, • Voluntary Life and AD&D, • Group Short-Term Disability, • Group Long-Term Disability, • Flexible Spending Accounts, • Employee Assistance Program, • 401(k), • Paid Time Off EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodations to qualified individuals with disabilities, as need, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at: for additional support and guidance. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI -RV1 3rd Shift - 10:00pm to 6:30am

Job Description Division: 145 - SEA-SVC Position: Overhead Crane Technician Reports To: Branch Manager Employee Type: Full-time Pay Range: $37.00-$50.00 an hour Job Summary A field service technician will provide quality installation, inspections, maintenance and repair service for hoist and crane equipment. A field service technician will also uphold the highest level of professional integrity and ethics as required to instill customer confidence and continued success in service. Essential Duties · Troubleshoot, repair and inspect overhead cranes and hoists, below the hook devices and other lifting devices. · Perform scheduled preventive maintenance activities on equipment. · Support customers by effectively interfacing with customer and office in repairing equipment as needed. · Evaluate and make recommendations regarding required repairs for customers. · Maintain rapport with customers by examining complaints; identifying solutions; suggesting improved methods and techniques; and recommending system improvements. · Service overhead crane systems by performing quality installations; performing OSHA/ANSI equivalent inspections; documenting and completing warranty work; troubleshooting breakdowns; performing preventive maintenance; and responding to emergency service/breakdown calls. · Document service and installation actions by completing forms, reports, and inspection checklist. · Builds and maintains customer confidence by maintaining good response time, informing customer of problems, and completing the job in a timely manner. · Maintain professional presentation, timeliness, appearance, and organization in all areas. Key Performance Indicators (KPIs) Indicators of success and satisfactory job performance will include but may not be limited to: · TBD Other subjective factors considered in assessing job performance include the ability to balance applied expertise and knowledge with “soft skills” such as interpersonal skills, communication ability, aptitude for learning and adaptation, computer skills, abstract and conceptual thinking, and accurate planning and prediction of operational activities. Required Skills and Knowledge · Ability to work under pressure and deadlines · Ability to work independently. · Ability to work well with others. · Ability to fabricate and weld structures (structural welding only if certified). · Ability to perform inspections to OSHA/ANSI criteria · Ability to troubleshoot electrical circuits, single or three phase and AC or DC. · Ability to assemble and repair complex machinery. · Excellent communication skills. · Ability to work at heights. · Willingness to travel. · Safety oriented. · Maintain confidentiality. · Quality and results driven. · Good driving record. · Ability to drive a service truck with a trailer. · Ability to drive in in-climate weather including but not limited to rain, sleet, snow, high wind, and icy conditions. · Ability to drive at night. · Ability to use hand tools, power tools…etc. · Ability to lay out column spacing for new installs. Supervisory Responsibility This position does not have supervisory responsibilities. Work Environment and Equipment Used This job operates in a field environment. Equipment used includes hand tools; power tools; lift equipment; material handling equipment, ear plugs, steel-toed shoes, gloves; safety glasses, lanyard and body harness. · 50% Indoor 50% Outdoor. Good ventilation, noise Occasional to Continuous Physical Demands Occasional=1-33% Frequent=34-66% Continuous=67-100% (According to the Dictionary of Occupational Titles) Non-material handling: · Bending: Frequent. Various bending and low-level positions are performed while working. · Squatting: Frequent. Various positions required. · Kneeling: Frequent. Various positions required. · Balance: Continuous. · Overhead reach: Frequent. Performed while working on equipment. · Ladder: Frequent. Used when working on equipment. · Personnel Lifting Equipment: Frequent. Used when working on equipment. · Hand controls: Occasional. Hand controls are used for testing and operating machinery. · Tools used: Frequent. Tools commonly used include screwdrivers, pliers, wrenches, welders, and cordless drills…etc. · Sitting; Frequent. Sitting while driving to worksites. · Standing/Walking: Frequent · Fine motor coordination/manual dexterity: Frequent. · Rotation: Frequent. · Physical demand level: Moderate. Material handling: · Floor to waist: Occasional. Lifting may be performed at all levels from floor to overhead, up to 100 pounds. · Pushing/pulling: Occasional. · Physical demand level; Frequent. Position Type/Expected Hours of Work This is a full-time position. Normal days and hours of work are Monday through Friday, 7 a.m. to 4 p.m., but this is a 24/7 service position. This position regularly requires long hours (up to but not to exceed 14 hours) and weekend work. Travel Travel is primarily local during the business days, although out-of-town and overnight travel is expected. Benefits Standard benefits, including 401(k), PTO, health, dental, vision, life & disability insurance, a company vehicle to take to and from home, standard uniforms and $100 tool allowance per year. Company DescriptionAce Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.Ace Industries, Inc., founded in 1932, is one of the largest and most diversified overhead crane and hoist distribution, manufacturing, and service companies in the United States. Ace has fully stocked warehouses, service centers, and sales offices in 25 different locations nationwide. Ace’s e-commerce site provides thousands of material handling products to a nationwide customer base. These include technical resources that allow users to source repair parts and accessories for critical infrastructure equipment that keep the backbone of our country running.

Job Description Job Summary Nongshim Foods America is seeking a reliable and skilled Industrial Boiler/Utility Technician to join our plant operations team. This role is essential for maintaining and operating our industrial utility systems, including high-pressure boilers, air compressors, water treatment, and related equipment critical to our food production process. Key Responsibilities • Operate, maintain, and troubleshoot high-pressure steam boilers and related systems, • Monitor boiler room equipment and ensure optimal performance and compliance with safety standards, • Perform preventative maintenance on utility systems including air compressors, pumps, valves, heat exchangers, and water treatment systems, • Respond to equipment alarms or malfunctions and execute corrective action, • Maintain accurate records of maintenance, inspections, and repairs, • Assist with plant utilities management and participate in energy efficiency initiatives, • Ensure compliance with all local, state, and federal regulations regarding boiler and utility operations, • Minimum 1–3 years of hands-on experience with high-pressure industrial boilers (firetube or watertube), • Valid California Certified Boiler Operator License or equivalent (Not Required, But a Plus), • Strong mechanical aptitude and understanding of steam systems, fuel systems (natural gas/oil), pumps, valves, pressure vessels, and boiler safety devices, • Proficient in diagnosing boiler faults and performing routine and emergency repairs, • Familiarity with burner management systems, flame safeguards, and boiler controls (mechanical and PLC-based), • Knowledge of water chemistry and treatment principles (e.g., hardness, pH, conductivity), • Ability to read and interpret piping and instrumentation diagrams (P&IDs), manuals, and technical specifications, • Boiler Operator License (State of CA or equivalent), • Experience in a food manufacturing or industrial setting, • Knowledge of water treatment systems or compressed air systems, • Basic computer skills for maintenance logging

Job Description Responsibilities Are you an Experienced Mobile Diesel Technician looking for an opportunity to work for a leader in the commercial truck industry? We are searching for tenured & certified technicians to support our customers! Our Mobile Diesel Technicians are responsible for maintaining the fleet for clients and to handle service calls at client locations, so we can provide expedited expertise directly to our customer's trucks & equipment on site. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Maintain all aspects of equipment according to company standards., • Handle basic maintenance of the truck including filling tank with fuel, checking oil, keeping it clean, and making sure required inspections are performed and documented as assigned., • Manage inventory control on the service truck and for keeping the vehicle properly stocked., • Report to the Service Manager and will be assigned duties on a daily basis., • Maintain availability for after-hours service calls and be available for an open work schedule., • Maintain and inventory the supplied tools for the work required in maintaining diesel engine trucks and associated equipment, • Read job order and observes and listens to vehicle in operation to determine malfunction and to plan work procedures., • Utilize various diagnostic equipment to determine malfunction and utilize available technical information to determine and perform correct repair procedure., • Diagnosis, removal and replacement of injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, changes or recharges batteries, and replaces transmissions and other parts., • Perform all necessary diagnostic and documentation functions on the company computer system., • Examine protective guards, loose bolts, and specified safety devices on trucks, and makes adjustments., • Lubricate moving parts and drives repaired vehicle to verify conformance to specifications., • Perform preventative maintenance work as requested., • Document and submit necessary paperwork or enter into mobile service program as work performed in an accurate and timely manner., • Respond to customer inquiries regarding the work. Foster positive customer relations., • Advise customer and/or service writer of any repairs or services which should be performed within the next 3 months., • Participate in training and utilize that training in the course of work. Basic Qualifications: • High school diploma or general education degree (GED)., • 5 years' experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Current CDL preferred but not required., • Medical card as required by the FMVS., • Mechanical aptitude and technical ability is a must., • Peterbilt, International, Ford, Hino, Isuzu, Cummins, & ASE certifications are preferred & rewarded Total Rewards & Compensation: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Responsibilities Ready for a career change or just starting out? A role as a Rush Technician is a dynamic and fulfilling next step! Rush Truck Centers is the largest network of commercial vehicle dealerships across the US. Whether you're a recent graduate eager to kickstart your career or an experienced & certified Diesel Technician seeking a new path, we are looking to welcome you to our team! With more than 200 locations and nearly 8,000 dedicated employees, Rush Enterprises operates Rush Truck Centers—the largest network of commercial vehicle dealerships in North America—committed to delivering exceptional customer service, personalized support, and comprehensive solutions tailored to every fleet’s needs. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Competitive starting salary, • Shift Premiums-In dealerships with multiple shifts, • Career stability, • Opportunity for growth, • Continued training on a variety of OEM equipment, • Advanced vehicle maintenance technology, • Performance Evaluation: From 120days to Every 6 month Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Senior Engineer Distribution Capacity Analysis Summary As a Senior Engineer in Distribution Capacity Analysis, you will lead high-impact initiatives that shape the future of distribution planning through improved forecasting, identification of grid capacity needs, and influence in regulatory proceedings. This role leverages data analytics to extract actionable insights, automate planning processes, and drive improvements in methodologies and practices. Your work will directly support building a cleaner, more reliable energy future. Responsibilities * Oversee engineers performing diagnostics, monitoring, and equipment inspections while fostering cross-functional knowledge sharing. * Lead the preparation of technical reports, presentations, and documentation to communicate project status, findings, and recommendations to stakeholders. * Collaborate with cross-functional teams to support the integration and implementation of future technologies and asset performance management strategies. * Support engineering and business initiatives, including the development of innovative procedures and design recommendations. * Provide guidance for new equipment installation and startup, ensuring smooth handover to operational phases. * Mentor junior engineers in assessing risks and investigating issues within distribution system infrastructure. * Gather and analyze data using engineering studies and procedures, including diagnostic testing of components and systems. * Facilitate training and professional development for team members to enhance skills and technical expertise. * Ensure the protection of physical, financial, and cybersecurity assets, while maintaining the highest standards of conduct in handling sensitive information and customer data. Minimum Qualifications * Bachelors degree in Engineering or a scientific/technical/math field. * Seven or more years of experience performing engineering work in operations, production, construction, or maintenance environments. * Valid Class C Drivers License. Preferred Qualifications * Strong background in electric system planning, including distribution system analysis and forecasting. * Proficiency in data analytics and automation of planning processes. * Familiarity with regulatory requirements and utility system planning standards. * Excellent communication and presentation skills, with the ability to convey complex technical concepts to both technical and non-technical audiences, including external stakeholders.

Job Description Senior Engineer 1, Ready Grid Summary The Senior Engineer 1, Ready Grid provides technical leadership in evaluating mitigation options, including traditional upgrades, non-wire alternatives, and emerging technologies for areas experiencing significant growth. This role collaborates with cross-functional teams to develop and implement proactive grid buildout strategies that align with long-term electrification and decarbonization goals. Responsibilities * Oversee engineers performing diagnostics, monitoring, and equipment inspections, while fostering cross-functional knowledge transfer. * Lead the preparation of technical reports, presentations, and documentation to communicate project status, findings, and recommendations. * Collaborate with cross-functional teams to ensure successful development, integration, and implementation of technologies and asset performance management strategies. * Contribute to engineering and business initiatives, including the development of innovative procedures and design recommendations. * Provide support for new equipment installation and startup, including transition to sustaining phases. * Guide junior engineers in investigating distribution system infrastructure threats based on observations and findings. * Gather and correlate data using engineering studies and procedures, including routine and diagnostic testing. * Facilitate training and professional development opportunities to enhance team skills and knowledge. * Ensure protection of physical, financial, and cybersecurity assets, while managing sensitive customer and proprietary data with the highest standards of integrity. Minimum Qualifications * Bachelors Degree in Engineering or a scientific/technical/math field. * Seven or more years of engineering experience in operations, production, construction, or maintenance environments. * Possess a valid Class C Drivers License. Preferred Qualifications * Bachelors degree or higher in Electrical Engineering, Power Systems, or related field. * Five or more years of experience in utility planning, load forecasting, or grid operations. * Strong understanding of utility infrastructure, planning, scoping, grid solutions, and regulatory frameworks. * Proficiency with system analysis tools (e.g., CYME, Python, PSLF, or load forecasting software). * Professional Engineer (PE) License. * Experience preparing detailed engineering studies and reports. * Strong written communication skills for technical reporting and management presentations. * Passion for innovation and implementing cutting-edge technologies to enhance system reliability and performance.

Job Description Overview: Core States Group designs, builds, and manages programs and projects across North America and has been recognized on top lists throughout the architecture, engineering, and construction (A/E/C) industry. Established in 1999, the company offers integrated solutions with seamless continuity, and many of the world’s most notable brands count on Core States Group to deliver speed to market, cost certainty, and compelling design. With 23 offices across the United States and Canada, Core States Group is an industry powerhouse that drives innovation and improves everyday life for countless people across several markets, including Convenience, Distributed Generation, Financial, Grocery, Housing, Industrial, Restaurants, Retail, Semiconductor, Tribal, Zero-Emission Vehicle (ZEV) Infrastructure, and more. Visit us at . Summary of Position: As a Civil Engineering Designer, you’ll get hands-on experience working on real projects across the U.S. while learning directly from seasoned engineers. You’ll collaborate with a talented, multi-disciplinary team; Site/Civil Engineers, MEP Engineers, Architects, and Construction Project Managers, to bring projects to life. From day one, you’ll play a key role in producing complete construction documents, all while gaining exposure to client needs, building codes, and real-world site adjustments. This is your chance to grow, learn, and contribute to projects that shape communities, all while building the foundation for an exciting career in architecture and engineering. Essential Duties and Responsibilities: • Apply civil engineering concepts to develop solutions to project challenges, • Preparation of construction plans, cost estimates, reports, and other project documents, • Coordination with review agencies, clients, and sub-consultants for permit application, • Preparation of grading plans, profiles, road design, and details using AutoCAD Civil 3D, • Research regulatory requirements and design standards, • Perform detailed and complex calculations for storm water facilities, utility systems, and roadway improvements, • Preparation of detailed technical reports and project presentation materials, • Assist project engineers in completing projects in a timely manner and within project budgets, • Attend project meetings Qualifications: • Currently enrolled as a Senior, graduating with a Bachelor's degree in Civil Engineering in Winter 2025 or Spring 2026, • EIT is a plus but not required, • Experience working with Civil 3D and AutoCAD software is a plus Team: You will work with a team of Designers, Professional Engineers and Project Managers. Work Location: This role can be based out of various of our office locations, including Kent, WA; Bellevue, WA; Puyallup, WA; Richland, WA; Chehalis, WA; Roseville, CA; Ontario, CA; Bentonville, AR; Farmers Branch, TX; Philadelphia, PA; West Chester, PA; Tampa, FL; and Somerville, NJ. Only candidates in close proximity to these locations will be considered. Benefits: • COMPENSATION – Competitive wages and bonus programs, • RETIREMENT – We offer a great 401(k) match to help you invest in your future and grow your retirement savings with confidence., • HEALTHCARE – Excellent health benefits, life insurance options, and supplemental benefit options, giving you the flexibility to choose the coverage that best fits your needs and lifestyle., • VACATION – Generous PTO time to help you recharge, relax, and maintain a healthy work-life balance., • PERKS – Team wellness challenges, Costco membership reimbursement, half-day Fridays during summer months + much more!, • WORK-LIFE BALANCE – A flexible work environment that supports a healthy work-life balance, whether you’re in the office, working remotely, or somewhere in between., • PAID PARENTAL LEAVE – Four weeks of fully paid parental leave to give you time to bond with your new addition and support your growing family., • TUITION REIMBURSEMENT – Advance your education with support! We offer tuition reimbursement to support your learning journey. Note: Please do not be concerned if you do not meet every requirement. At Core States we are dedicated to building a diverse and inclusive workplace, so if you are excited about this role but your experience does not align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. This position will remain open until it is filled.

Job DescriptionJob Title: Commercial Lines Account ManagerSalary Range: $75,000 - $90,000Location: Ontario, CA About Our Agency: We are an independent insurance agency committed to providing outstanding service to our clients. We are currently seeking an experienced Commercial Lines Account Manager with a strong background in servicing a diverse range of commercial accounts. This role is pivotal in maintaining and growing our client relationships through expert management and consultation. Key Responsibilities: • Expertise in Diverse Accounts: Bring a working knowledge of Property and Casualty accounts across various industries including Construction, Manufacturing, Retail, and Restaurants., • Client Consultation & Support: Respond to client inquiries regarding policy and coverage, ensuring accurate and timely advice., • Policy Management: Skillfully market and quote new business and account renewals, striving for optimal coverage and cost efficiency for clients., • Carrier Relations: Liaise with multiple carrier underwriters, leveraging these relationships to benefit client accounts., • Renewal Management: Oversee account renewals, compiling and managing necessary information effectively. Qualifications:, • Experience: 3-5 years (or more) in the insurance industry, specifically in servicing commercial accounts., • Licensing: Must possess a current Property and Casualty license., • Software Proficiency: Experience with Applied (TAM or EPIC) or AMS360 is preferred., • Industry Knowledge: A solid understanding of the Insurance and/or Brokerage business., • Technical Skills: Proficiency in Microsoft Office Suite (Word, Excel, Outlook)., • Communication: Strong verbal and written communication skills. What We Offer:, • A collaborative and supportive work environment., • Opportunities for professional growth and development., • A competitive salary reflecting experience and qualifications. Confidentiality Promise: All inquiries and applications will be handled with the utmost confidentiality.

Job Description QAI Job Number: QAI-INSPELE-10272025 JOB TITLE: Inspector - ELE LOCATION: Rancho Cucamonga, CA NUMBER OF POSITIONS: 1 CATEGORY: Special Inspections SALARY RANGE: $60,000 to $70,000 per year BACKGROUND: Founded in 1995 by a group of experienced certification and testing experts, QAI is an independent third-party testing, inspection and certification organization which serves the building, technology, and construction industries (among others) with cost effective solutions through our in-house capabilities / services, and an established world-wide network of qualified affiliates. The QAI name and logo have become well recognized throughout the Certification world resulting in steady growth of our Certification, Testing, and Inspection business streams with offices throughout North America and Asia. QAI is currently seeking an experienced Inspector to support the Electrical Product Safety Department at our Rancho Cucamonga, CA location. Our ideal candidate would be someone who is very motivated and likes to be hands on, interested in doing field inspection and working in a product testing laboratory. The ideal candidate would be someone with electrical product testing and inspection background who would be open to travel in US. DUTIES: The successful candidate will perform, but not be limited to, the following duties: • Performs inspections to CSA and NFPA Standards as required by product division., • Maintains a high level of technical competence in the field of inspection & testing, • Manages day-to-day activities with respect to scheduling and reporting., • Perform inspections and field evaluations at remote client sites., • Schedules and coordinates directly with clients., • Ability to explain technical requirements and findings to the clients., • Performing testing and evaluation of various electrical products to nationally recognized electrical safety standards (CSA, UL, IEC, etc.)., • Must have experience in CSA and /UL and IEC standards, • Be able to write and review concise, objective, and informative test reports, and documents., • Independently completing projects of evolving complexity; issues, edits, and reviews certification reports, and other related documents, • Expert in the key standards and technology for the area of specialization i.e. can train others on requirements and confident in technical audits, • Independently conducts internal and external audits (ISO 17065, 17025, 17020) for various programs. Able to be a liaison for audits., • Provides sales support for projects of all complexity; actively quoting and leading client meetings, • Effectively/efficiently deals with multiple projects, conflicting timelines, and changing priorities, • Effectively resolves technical issues to determine the appropriate interpretation of technical requirements; produces necessary documentation, • Become familiar with the QAI quality system and administrative procedures., • Ensure work complies with the QAI quality system, • Maintains good housekeeping, taking care of safety and using PPE at all times, • Actively mentors and coaches’ junior staff as a regular part of their role, • Maintains effective communication with internal staff and clients (willingness to travel as needed), • Must be willing to be part of an energetic team with a can-do attitude., • Other duties as assigned by the manager or its designee. QUALIFICATIONS: The successful candidate will have: • Bachelor’s degree in electrical engineering or an electrical technologist diploma, or equivalent., • 3-5 years of directly related experience, • Experience evaluating and testing IT/Hi-Tech, lighting, industrial, medical products. Experience with hazardous location products would be an asset., • Ability to grasp general concepts in a field of testing and apply it to specific test methods., • Experience performing inspections and field evaluations., • Possess superior MS Word and Excel skills, be proficient with Email and Adobe Acrobat., • Possess “Good Laboratory Practice” skills essential for testing products., • Experience working at an ISO 17025 accredited testing laboratory, • Experience working in the testing, inspection and certification industry, • Knowledge of common CSA, UL, IEC, etc. test methods relating to electrical products, • Flexibility in work schedule and working overtime, if needed ADDITIONAL INFORMATION: • Candidates must hold a valid US driver’s license., • Candidates must hold a valid passport, or be able to obtain a valid passport, and must be able to travel to the Canada and international destinations. Key Technical Competence: • Accepts instruction and follows it for testing outside of their general scope of knowledge and experience., • Able to grasp general concepts in a field of testing and apply it to specific test methods., • Able to perform testing and as knowledge grows in a specific field of testing graduates to more complex testing methods., • Seeks assistance and knowledge from more senior personnel when a specific requirement is outside of their general scope of knowledge., • Good working knowledge of the test methods in their specific discipline., • Able to multi-task with some degree of efficiency and accuracy., • Maintains a sense of ownership and responsibility for projects assigned to them. Join our Team! Learn, Develop, Grow! At QAI, you will have the opportunity to put your aptitude, experience, knowledge, and desire to learn to the test. We make a difference in people’s lives through the work we do as a top-notch Product Testing, Certification, and Inspection body whilst providing rewarding careers for our employees. APPLYING: QAI Laboratories offers competitive compensation and benefits package. We are committed to the long-term success of our employees. Interested? Please submit your resume and cover letter at . Applications will only be accepted when emailed in MS Word or PDF format and must have a job-specific cover letter. Please be sure to include the QAI job number in the subject line of your communication. Check our other career opportunities on our website careers page: qai.org/join-our-team /. Equal Opportunity Employer: QAI Laboratories is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. NOTE: No sponsorship is available.

Job Description Overview: Core States Group designs, builds, and manages programs and projects across North America and has been recognized on top lists throughout the architecture, engineering, and construction (A/E/C) industry. Established in 1999, the company offers integrated solutions with seamless continuity, and many of the world’s most notable brands count on Core States Group to deliver speed to market, cost certainty, and compelling design. With 23 offices across the United States and Canada, Core States Group is an industry powerhouse that drives innovation and improves everyday life for countless people across several markets, including Convenience, Distributed Generation, Financial, Grocery, Housing, Industrial, Restaurants, Retail, Semiconductor, Tribal, Zero-Emission Vehicle (ZEV) Infrastructure, and more. Visit us at . Summary of Position: As a Fire Protection Engineering Designer, you’ll get hands-on experience working on real projects across the U.S. while learning directly from seasoned engineers. You’ll collaborate with a talented, multi-disciplinary team; Site/Civil Engineers, MEP Engineers, Architects, and Construction Project Managers, to bring projects to life. From day one, you’ll play a key role in producing complete construction documents, all while gaining exposure to client needs, building codes, and real-world site adjustments. This is your chance to grow, learn, and contribute to projects that shape communities, all while building the foundation for an exciting career in architecture and engineering. Essential Duties and Responsibilities: • Apply civil engineering concepts to develop solutions to project challenges, • Preparation of construction plans, cost estimates, reports, and other project documents, • Coordination with review agencies, clients, and sub-consultants for permit application, • Preparation of grading plans, profiles, road design, and details using AutoCAD Civil 3D, • Research regulatory requirements and design standards, • Perform detailed and complex calculations for storm water facilities, utility systems, and roadway improvements, • Preparation of detailed technical reports and project presentation materials, • Assist project engineers in completing projects in a timely manner and within project budgets, • Attend project meetings Qualifications: • Currently enrolled as a Senior, graduating with a Bachelor's degree in Fire Protection or Mechanical Engineering in Winter 2025 or Spring 2026, • EIT is a plus but not required, • Experience working with AutoCAD and Revit a plus Team: You will work with a team of Designers, Professional Engineers and Project Managers. Work Location: This role can be based out of various of our office locations, including Kent, WA; Bellevue, WA; Puyallup, WA; Richland, WA; Chehalis, WA; Roseville, CA; Ontario, CA; Bentonville, AR; Farmers Branch, TX; Philadelphia, PA; West Chester, PA; Tampa, FL; and Somerville, NJ. Only candidates in close proximity to these locations will be considered. Benefits: • COMPENSATION – Competitive wages and bonus programs, • RETIREMENT – We offer a great 401(k) match to help you invest in your future and grow your retirement savings with confidence., • HEALTHCARE – Excellent health benefits, life insurance options, and supplemental benefit options, giving you the flexibility to choose the coverage that best fits your needs and lifestyle., • VACATION – Generous PTO time to help you recharge, relax, and maintain a healthy work-life balance., • PERKS – Team wellness challenges, Costco membership reimbursement, half-day Fridays during summer months + much more!, • WORK-LIFE BALANCE – A flexible work environment that supports a healthy work-life balance, whether you’re in the office, working remotely, or somewhere in between., • PAID PARENTAL LEAVE – Four weeks of fully paid parental leave to give you time to bond with your new addition and support your growing family., • TUITION REIMBURSEMENT – Advance your education with support! We offer tuition reimbursement to support your learning journey. Note: Please do not be concerned if you do not meet every requirement. At Core States we are dedicated to building a diverse and inclusive workplace, so if you are excited about this role but your experience does not align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. This position will remain open until it is filled.

Job Description • Join Our Team of Highly Talented and Committed Clinical Professionals * Founded in 2014 in San Francisco Bay Area, Neogen Care’s vision is to transform the way healthcare is provided and received by patients in the home. We strive to improve the quality of your life with our team of specially trained nurses, therapists and reliable caregivers. As a leading provider of medical and non-medical home care services we will continue to contribute to the future of our community and support healthy lifestyles. Neogen Care is a will established Home Health Care agency with patients throughout the California Bay Area, greater Los Angeles, Ventura, San Diego, Orange, San Bernardino and Riverside counties. Our agency is fully partnered with Kaiser Permanente as our primary client. We share Kaiser's culture and vision to provide patient centered care with a strong focus on quality throughout our patient care operations. We have a strong compliance history of successfully passing CHAP surveys and client audits; and operate with ethics at the center of our Core Values. We are looking for a Home Health Occupational Therapist to join our fast-growing team. Become part of a notable company and help us achieve our goals! POSITION: Occupational Therapist (Home Health) TYPE: Full-time LOCATION: Victorville, CA and surrounding areas PAY: Competitive per visit rates plus mileage reimbursements plus great benefits! Dictation Charting: Takes much less time to chart, higher work/life balance Essential Functions: • Conducting physical and psychological assessments and developing or following a treatment plan., • Assessing patient home and work environments of clients and deciding what adjustments are needed., • Advising patients on adaptive equipment to help them with daily activities., • Developing physical rehabilitation programs to help patients regain lost skills., • Preparing patients for a return to work., • Educating caregivers and family members on patient care., • Evaluating results and progress of occupational therapy on patients., • Maintaining professional knowledge and technical progress in order to provide patients with the best treatment program available., • Complying with federal, state, and local certification requirements., • Evaluating patient condition regarding physical and basic mental health., • An undergraduate degree in Occupational Therapy from a university certified by the ACOTE (Accreditation Council for Occupational Therapy Education) or AOTA (American -Occupational Therapy Association)., • Certified by the National Board for Certification., • Compliant with state healthcare regulatory requirements., • Possess up-to-date knowledge of treatment practices and physical therapy programs., • Ability to take care for patients with different personalities., • Ability to assess patient condition and work with treatment plans., • A minimum of 1 year of recent Occupational Therapy experience in an institutional setting., • A minimum of 1 year of recent Occupational Therapy experience with a home health agency., • Valid/Current State of California Occupational Therapy license., • Current CPR/BLS certification., • Must be a licensed driver with vehicle, in good working order, that is currently registered and insured in accordance with state and Neogen Care requirements., • Strong skills in observation, verbal and written communication, problem-solving, basic math, Electronic Medical Record Software (Kinnser a plus), and basic computer skills to manage email, texts, employment record self-service, etc. Neogen Care, an essential health industry company, practices all protective measures recommend by the WHO, CDC, state, and county to safeguard our employees and patients from COVID-19 exposure to include: screening, testing, PPE, social distancing. #NCOT

Job Description • Join Our Team of Highly Talented and Committed Clinical Professionals * Founded in 2014 in San Francisco Bay Area, Neogen Care’s vision is to transform the way healthcare is provided and received by patients in the home. We strive to improve the quality of your life with our team of specially trained nurses, therapists and reliable caregivers. As a leading provider of medical and non-medical home care services we will continue to contribute to the future of our community and support healthy lifestyles. Neogen Care is a will established Home Health Care agency with patients throughout the California Bay Area, greater Los Angeles, Ventura, San Diego, Orange, San Bernardino and Riverside counties. Our agency is fully partnered with Kaiser Permanente as our primary client. We share Kaiser's culture and vision to provide patient centered care with a strong focus on quality throughout our patient care operations. We have a strong compliance history of successfully passing CHAP surveys and client audits; and operate with ethics at the center of our Core Values. We are looking for a Home Health Occupational Therapist to join our fast-growing team. Become part of a notable company and help us achieve our goals! POSITION: Occupational Therapist (Home Health) TYPE: Full-time LOCATION: Apple Valley, CA and surrounding areas PAY: Competitive per visit rates plus mileage reimbursements plus great benefits! Dictation Charting: Takes much less time to chart, higher work/life balance Essential Functions: • Conducting physical and psychological assessments and developing or following a treatment plan., • Assessing patient home and work environments of clients and deciding what adjustments are needed., • Advising patients on adaptive equipment to help them with daily activities., • Developing physical rehabilitation programs to help patients regain lost skills., • Preparing patients for a return to work., • Educating caregivers and family members on patient care., • Evaluating results and progress of occupational therapy on patients., • Maintaining professional knowledge and technical progress in order to provide patients with the best treatment program available., • Complying with federal, state, and local certification requirements., • Evaluating patient condition regarding physical and basic mental health., • An undergraduate degree in Occupational Therapy from a university certified by the ACOTE (Accreditation Council for Occupational Therapy Education) or AOTA (American -Occupational Therapy Association)., • Certified by the National Board for Certification., • Compliant with state healthcare regulatory requirements., • Possess up-to-date knowledge of treatment practices and physical therapy programs., • Ability to take care for patients with different personalities., • Ability to assess patient condition and work with treatment plans., • A minimum of 1 year of recent Occupational Therapy experience in an institutional setting., • A minimum of 1 year of recent Occupational Therapy experience with a home health agency., • Valid/Current State of California Occupational Therapy license., • Current CPR/BLS certification., • Must be a licensed driver with vehicle, in good working order, that is currently registered and insured in accordance with state and Neogen Care requirements., • Strong skills in observation, verbal and written communication, problem-solving, basic math, Electronic Medical Record Software (Kinnser a plus), and basic computer skills to manage email, texts, employment record self-service, etc. Neogen Care, an essential health industry company, practices all protective measures recommend by the WHO, CDC, state, and county to safeguard our employees and patients from COVID-19 exposure to include: screening, testing, PPE, social distancing. #NCOT

Job Description • Join Our Team of Highly Talented and Committed Clinical Professionals * Founded in 2014 in San Francisco Bay Area, Neogen Care’s vision is to transform the way healthcare is provided and received by patients in the home. We strive to improve the quality of your life with our team of specially trained nurses, therapists and reliable caregivers. As a leading provider of medical and non-medical home care services we will continue to contribute to the future of our community and support healthy lifestyles. Neogen Care is a will established Home Health Care agency with patients throughout the California Bay Area, greater Los Angeles, Ventura, San Diego, Orange, San Bernardino and Riverside counties. Our agency is fully partnered with Kaiser Permanente as our primary client. We share Kaiser's culture and vision to provide patient centered care with a strong focus on quality throughout our patient care operations. We have a strong compliance history of successfully passing CHAP surveys and client audits; and operate with ethics at the center of our Core Values. We are looking for a Home Health Occupational Therapist to join our fast-growing team. Become part of a notable company and help us achieve our goals! POSITION: Occupational Therapist (Home Health) TYPE: Full-time LOCATION: San Bernardino, CA and surrounding areas PAY: Competitive per visit rates plus mileage reimbursements plus great benefits! Dictation Charting: Takes much less time to chart, higher work/life balance Essential Functions: • Conducting physical and psychological assessments and developing or following a treatment plan., • Assessing patient home and work environments of clients and deciding what adjustments are needed., • Advising patients on adaptive equipment to help them with daily activities., • Developing physical rehabilitation programs to help patients regain lost skills., • Preparing patients for a return to work., • Educating caregivers and family members on patient care., • Evaluating results and progress of occupational therapy on patients., • Maintaining professional knowledge and technical progress in order to provide patients with the best treatment program available., • Complying with federal, state, and local certification requirements., • Evaluating patient condition regarding physical and basic mental health., • An undergraduate degree in Occupational Therapy from a university certified by the ACOTE (Accreditation Council for Occupational Therapy Education) or AOTA (American -Occupational Therapy Association)., • Certified by the National Board for Certification., • Compliant with state healthcare regulatory requirements., • Possess up-to-date knowledge of treatment practices and physical therapy programs., • Ability to take care for patients with different personalities., • Ability to assess patient condition and work with treatment plans., • A minimum of 1 year of recent Occupational Therapy experience in an institutional setting., • A minimum of 1 year of recent Occupational Therapy experience with a home health agency., • Valid/Current State of California Occupational Therapy license., • Current CPR/BLS certification., • Must be a licensed driver with vehicle, in good working order, that is currently registered and insured in accordance with state and Neogen Care requirements., • Strong skills in observation, verbal and written communication, problem-solving, basic math, Electronic Medical Record Software (Kinnser a plus), and basic computer skills to manage email, texts, employment record self-service, etc. Neogen Care, an essential health industry company, practices all protective measures recommend by the WHO, CDC, state, and county to safeguard our employees and patients from COVID-19 exposure to include: screening, testing, PPE, social distancing. #NCOT

Job Description SitelogIQ is a world-class team making a large-scale impact on the efficiency and sustainability of the places we live, work, shop, and heal. SitelogIQ delivers turnkey energy efficiency and property improvement programs that transform built environments and breathe life into the sustainability, financial, and resiliency goals of real estate teams and corporations across the U.S. Our mission is to make buildings better while making it easy for our clients to accelerate their impact. The Commercial Solar Estimator develops complete and accurate project cost estimates for commercial and distributed-generation solar (+ BESS) projects. This role bridges early-stage development and construction, translating conceptual opportunities into firm proposals and fully engineered, shovel-ready projects. The Commercial Solar Estimator leads the coordination of technical scope, design validation, and cost modeling to the construction delivery team for execution. Target Salary: $85,000 - $115,000 depending on experience Commercial Solar Estimator Responsibilities: Project Development & Scope Definition • Transform conceptual design inputs from the Development Team into detailed scopes of work and preliminary designs., • Coordinate site data collection, interconnection review, and constructability assessments., • Collaborate with engineering to validate design concepts, ensure code compliance, and produce CD30 → CD90 deliverables., • Develop detailed cost estimates, bills of materials, and measurement takeoffs for solar PV and BESS projects., • Gather and analyze subcontractor and vendor quotes; maintain a current cost database for materials and labor., • Work with engineering and CAD teams to generate or review design drawings., • Ensure alignment between design intent, code requirements, and cost estimates., • Partner with Sales, Product Management, and Operations to align estimating strategy with customer and market needs., • Communicate clearly with internal stakeholders to ensure project assumptions are transparent and executable., • Deliver complete CD90–CD100 handoff packages to the construction team, including design sets, scope narratives, pricing documentation, and procurement recommendations., • Bachelor’s degree in Engineering, Construction Management, or related field (preferred) or equivalent experience., • 4-8 years’ experience in each of the below:, • Estimating renewable energy projects, specifically relevant to electrical and cost estimation, • Specialty contractor (MEP) experience, while this role is mostly focused on retrofits of existing properties, new construction/general contractor experience is preferred., • Certified Energy Manager, NABCEP, LEED AP . (Candidate is not expected to have all) This position operates in both office and field settings. Travel may be required for site walks, vendor visits, or project meetings. While performing the duties of this job, the employee may be regularly required to stand, sit, talk, hear, reach, stoop, kneel, and use hands and fingers to operate a computer, phone, and keyboard. May regularly need to lift up to 20 lbs., unassisted. Benefits: We offer a highly competitive salary, and comprehensive benefits, including: • Medical, dental, and vision insurance, • Disability and life insurance, • 401K, • Flex time off, • 12 paid holidays, • Tuition reimbursement, • Opportunities to drive our DE&I efforts by joining our affinity groups, Veterans and Allies Leadership Organization, or Women Inspiring & Strengthening Everyone At SitelogIQ, we’re focused on creating a great environment for our team first so that it is more energizing and rewarding to focus on creating a great customer experience. That’s what we call a win-win. We partner with clients in K-12, higher ed, government, healthcare, multifamily housing, and industry to optimize energy efficiency, improve indoor air quality, address lighting, and improve the customer experience. With offices across the country, it’s rewarding to make a difference in the communities where our teammates live and work. NOTE: This job description is not intended to be all-inclusive. Employee may be asked to perform other related duties as required to meet the ongoing needs of the Organization. SitelogIQ is an Equal Opportunity Employer and participates in the E-Verify program. #LI-MS1

Job Description Your challenge Join a stimulating environment where your contributions are valued and growth opportunities are abundant. Gain international business experience by working with dynamic teams in both the Netherlands and the USA. Your role We are seeking a highly skilled Engineering Manager with deep expertise in RF and microwave components and systems. As an Engineering Manager you will lead the technical team in Ontario, California and be responsible for both engineering sustaining and for carrying out multiple development projects related to our metrology, interconnect and tuner product lines. You will collaborate with colleagues who have complementary expertise (electronics, microwaves) as part of a multidisciplinary team. Key duties and responsibilities • Lead the development team to deliver innovative, cost-efficient products on aggressive timelines., • Execute product roadmaps and provide timely recommendations based on market insights., • Oversee sustaining engineering for metrology, interconnect, and electro-mechanical tuner product lines., • Act as a key technical resource, accelerating the design process through hands-on contributions., • Plan, schedule, budget, and track engineering projects from concept to execution., • Evaluate design challenges and trade-offs, making decisions that align with product and company goals., • Communicate effectively across departments to ensure timely and compliant product development., • Foster professional development and build a high-performing engineering team., • Drive career growth and manage team development., • Ensure traceable documentation of design stages in compliance with quality procedures., • Manage operational budgets for your team, including personnel and equipment., • Support business development by evaluating new product ideas and estimating specifications, timelines, and costs., • Provide pre-sales support through system and solution proposals. Required skills and expertise • Master’s or PhD in Electronic/Electrical Engineering with a focus on RF & microwave engineering., • 10+ years of engineering design experience in microwave/RF test and measurement., • Strong technical background with leadership experience across electrical, mechanical, and software disciplines., • Desired experience in amplifier design, load pull techniques, and calibration methodologies., • Proven success in leading technical development teams and delivering results., • Strategic planning and multitasking capabilities with strong problem-solving skills., • Experience in project management, quality assurance, and cost control., • Customer-focused mindset with excellent interpersonal and communication skills., • Metrics-driven approach to performance evaluation., • Creative, solution-oriented thinker with a drive for excellence., • Ability to coach, mentor, and foster team collaboration. What we offer • An inspiring, dynamic and challenging high-tech environment;, • A full-time position (40 hours per week);, • A market-competitive salary (commensurate with skills and experience);, • Annual performance bonus and multi-year retention bonus plan Location The Engineering Manager will work from one of our engineering office in Ontario, California. About Maury Microwave Corporation Best-In-Class with Maury Microwave. Maury Microwave is your calibration, measurement and modeling solutions partner. By taking responsibility for all aspects of calibration, measurement and modeling, we are able to empower you and help you succeed. We accomplish that by leveraging our measurement expertise to identify, create and supply every single component from the smallest adapter to the largest test system, thereby guaranteeing a seamless integration. We supply adapters, cable assemblies and attenuators; coaxial and waveguide VNA calibration kits, calibration standards and calibration systems; turnkey characterization solutions including measurement and modeling software, impedance tuners, load pull and noise parameter systems and more. With our best-in-class solutions, we complete your lab. Maury Microwave is an Equal Opportunity/Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or other characteristics protected by applicable federal, state or local law.

Job Description We have an immediate opportunity for an Electrical Engineer which has thorough knowledge and experience with regulations, guides, standard, codes, methods working with Transmission and Distribution engineering principles. This position requires strong analytical and problem-solving skills. Duties and Responsibilities • Responsible for gathering and evaluating line data of transmission, sub-transmission, distribution systems, transformer test data, and generator data. Utilizing Modell systems on appropriate software tool, such as CAPE., • Experience performing short circuit studies while protecting coordinated studies necessary for completing relay settings, perform relay settings, prepare protection summary and coordinating relay settings with neighboring utilities and other authorities required assignments meeting WECC and NERC PRC compliance., • Responsible for issuing Substation Relays and field Auto Recloser settings (GE, SEL and Electromagnetic) through ASPEN relay database to field., • Support Test technicians in-servicing or commissioning relay settings. Support and communicate with Test technician for making revisions/changes to relay settings as required., • Experience performing system studies provide protection requirements by design., • Responsible for designing protective relay systems to ensure the safety and reliability of the grid by reviewing AC/DC/Logic drawings., • Will be responsible for reviewing and signing off one-line, elementary logic diagrams and work with all other engineers supporting this department., • Develop and peer-reviewed protective relay setting for systems ranging from 12kV to 765kV, demonstrating deep technical knowledge across a wide voltage spectrum., • Previously led and executed short circuit studies and designed step distance and pilot protection schemes for 44-100kV lines, ensuring system reliability and compliance with FAC-008/NERC/IEEE/ICE/ANSI standards. Education and Experience • Bachelor’s or Master’s in Electrical Engineering., • 10 years of engineers experience related to Transmission and Distribution., • PE desired, not required., • Working knowledge of transmission systems operation (line-and-bus arrangements, reclosing practices)., • Knowledge of digital logic design principles (logic, gates, latches) and experience in developing logic diagrams., • Experience and knowledge of System One-Line Diagram and relay and AC and DC Schematics as well as AC and DC wiring standards., • Experience in developing relay settings and familiarity with Relay setting software (GE EnerVista UR Setup, SEL AcSELerator)., • Clear understanding and knowledge of NERC PRC Compliances (PRO 23,27,26)., • Ability and experience to interpret/apply/design electrical one-line, elementary, protection logic diagrams., • Demonstrated experience in developing logic diagrams, programming relay setting and preparing setting document for Test technician and support them for in-serving relays for bulk power., • Proven experience with Computer Aided protection Engineering Software (CAPE), CYME, ASPEN relay database or Blue Beam Software., • Experience interpreting/applying, designing electrical one-line elementary, protection logic diagrams., • Experience in performing system studies, symmetrical component analysis, fault calculation, and set Electromechanical Relays, SEL and GE microprocessor relays using accelerator and URPC software., • Proficient with Microsoft Word, Excel, PowerPoint, Access, Visio, and Project., • Ability to demonstrate effective resource and project planning, decision making and ability to stay current with relevant technology and innovation., • Excellent written and communication skills. Upon a conditional job offer, a drug test and background check will be required. Compensation based on experience. (Electrical Engineer, Transmission, Distribution, NERC, CAPE, Substations, Protection, Relays, Substation) Company DescriptionAbout us: 347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website us:\r\n\r\n347 Group, Inc. provides staffing resources to a variety of industries. We have an experienced team of staffing professionals and provide a wide range of services to our clients. Visit our website .

Job Description Overview $23.50-$32.75/Hourly The primary role of the Dental Assistant is to support the success of the clinicians through effective delivery of the Perfect Patient Experience (PPE), thus creating a Patient for Life (PFL). Dental assistants perform a variety of patient care, office, and laboratory duties. Dental assistants prepare patients for oral examination and assist other dental professionals in providing treatment to the teeth, mouth, and gums. Dental assistants must work effectively with co-workers including Specialty dental assistants, patients, and the front office by sharing ideas in a constructive and positive manner. A successful dental assistant will execute active listening to objectively consider ideas and suggestions from others, keep commitments; keep others informed of work progress, and address problems constructively to identify practical business solutions. Specialty Dental Assistants If dental assistant is assigned within specialty areas including: Endodontics, Oral Surgery, Orthodontics, Periodontics or Pediatric, they will primarily be supporting clinicians within that specialty and may be required to have additional training. Responsibilities * Perform functions in accordance with the applicable state’s Dental Auxiliaries Table of Permitted Duties. * Actively participate in the PPE by striving to keep your patients focused on optimal treatment while attending to their individual needs and concerns. * Escort patients to/from the front desk and introduce them to other team members as appropriate. * Communicate with the front and back office teams to ensure the Orthodontists schedule runs smoothly and efficiently. * Maintain a clean, sterile, and cheerful environment. * Sterilize and disinfect instruments and equipment; clean each operatory in accordance with the state applicable infection control guidelines. * Prepare patients for treatment and assist the dentist- thereby enabling them to provide efficient, quality dental treatment. * At the direction of the clinician, complete radiographs and intra-oral pictures of patients in an efficient and timely manner. * Prepare tray setups for dental procedures and maintain adequate supply levels in each operatory, replenishing as needed to provide efficient patient care. * Keep the patients' mouths dry and clear by using suction or other devices. * Instruct patients on postoperative and general oral health care as directed by the clinician. * Record patient charting and all the clinician’s notes in the digital patient chart as directed by the clinician. * Support patient care by presenting treatment record, consents and health history to clinician prior to patient treatment. * Ensure equipment is maintained according to manufacturer’s guidelines. * Work closely with Lead Dental Assistant to ensure adequate clinical supplies are on hand. * Utilize technology by learning how to operate and give explanation/demonstration of how to operate to others. * Participate in daily morning huddles, monthly team meetings and any other meetings as required. * Models company culture, values, standards and best operational practices based on the “We Believes.” * Demonstrates stewardship of the PDS Brand making decisions consistent with the PDS Brand framework. * Implements the Perfect Patient Experience process in efforts to gain Patients for Life. * Maintains an appropriate professional appearance and demeanor in accordance with company policies; addresses others professionally and respectfully. * Ensures Compliance with Company policies, as well as State, Federal and other regulatory bodies. * Other duties and responsibilities as assigned. Qualifications * Equivalent to high school diploma or general education degree (GED), and specified training courses as mandated by state for certification, licensure, or registration. * Certificates/Licenses/Registrations: As mandated by applicable state. * Specialty Dental Assistants must possess and maintain a valid driver’s license and automobile insurance. Driver’s license must be verified by completing a background check and motor vehicle record check at the time of hire. * Specialty Dental Assistants are required to timely travel to multiple offices per day, in some cases several times per day, and must have reliable means of transportation to travel to assigned offices. * In lieu of a valid driver’s license and automobile insurance, Specialty Dental Assistant must have reliable means of alternate transportation which would allow for required, timely travel to multiple offices per day, in some cases several times per day. * Travel may be planned or unplanned and is subject to change without notice. Preferred * One-year certificate from an accredited college or technical school; or equivalent combination of education and experience. Knowledge/Skills/Abilities * Ability to respond to common inquiries from patients, staff, vendors, or other members of the business community. * Ability to draw valid conclusions, apply sound judgment in making decisions, and to make decisions under pressure. * Ability to interact with other Clinicians and Owner Doctors effectively * Ability to interpret and apply policies and procedures. * Ability to read, analyze, and interpret documents such as business periodicals, professional journals, technical procedure manuals, safety rules, operating and maintenance instructions, and governmental regulations. * Ability to communicate effectively and present information, both verbally and in writing, to patients and co-workers. * Ability to interpret a variety of instructions furnished in written, verbal, or diagram form. * Ability to maneuver through basic computer software. * Results Oriented (Energetic self-starter; sets realistic goals; meets commitments; persistent, prioritizes daily to achieve results). * Customer Service Advocate (flexible and adaptive; empathetic; passionate; ethical). * Influencer (active listener/observer of behavior; creates a win/win need for change) * Self-motivated, reliable individual capable of working independently as well as part of a team. * Ability to multi-task effectively without compromising the quality of the work. * Excellent interpersonal, oral and written communication skills. * Ability to handle and maintain extreme confidentially Patient records. * Organized, detail-oriented individual able to work in a fast-paced environment. Benefits • Medical, dental, and vision insurance, • Paid time off, • Tuition Reimbursement, • 401K, • Paid time to volunteer in your local community Responsibilities PDS Health is an Equal Opportunity Employer. We celebrate diversity and are united in our mission to create healthier and happier team members.

Job Description Swiss-Type CNC Lathe Setup Machinist (Tsugami Platforms) Express Employment Professionals of Rancho Cucamonga is hiring a skilled machinist to set up and operate Tsugami Swiss-type CNC lathes producing tight-tolerance components. Compensation: $30+/hour to start, based on experience and technical capability. Role snapshot • Translate work orders, blueprints, and drawings into robust Swiss-turn setups., • Run production to exacting tolerances; monitor, adjust, and optimize throughout the job., • Load raw stock, set tooling, and verify offsets for consistent accuracy., • Execute first-article and in-process inspections with micrometers, calipers, gauges., • Make program edits and tool/wear offset changes to maintain dimensional control., • Perform tooling changes and minor maintenance to ensure machine reliability., • Keep the work cell clean, safe, and organized per company standards., • Document production counts, scrap, downtime, and quality notes., • Partner with Quality Control and Engineering to troubleshoot issues., • Support training/mentorship of junior operators. Qualifications, • 3+ years hands-on Tsugami Swiss setup/operation required; 5+ years preferred., • Strong blueprint reading and GD&T skills., • Proficiency with precision measurement and inspection practices., • Comfort with program edits and tool offset adjustments. Express Employment Professionals 9521 Business Center Dr Ste 101 Rancho Cucamonga, CA 91730 Proficiencies • CNC Programming, • Machine Setups for Production Runs

Job Description Asset Data Management Senior Advisor Summary The Asset Data Management Senior Advisor is responsible for leading asset data remediation strategies and sustainable solutions, including the development of a Digital Twin for the power grid. This role collaborates with IT to implement system enhancements, address root causes, and design automation and field tools to detect and permanently cleanse asset data records. The position ensures data quality, compliance, and effective information governance practices across the organization. Responsibilities * Oversee customer fraud prevention activities, mitigate privacy incidents, and monitor misuse of customer information. * Develop and review information governance policies, standards, presentations, communications, and training. * Prepare materials for internal/external audits, external assessments, and regulatory reporting related to information management. * Ensure projects align with information governance policies and standards. * Contribute to assessments of emerging technology platforms and new service offerings. * Provide complex input to strategic business initiatives within the information governance practice. * Lead coordination of data quality remediation plans where data fails to meet established standards. * Support the development and maintenance of an information governance framework integrated with organizational guidance and processes. * Participate in business continuity policy development and process mapping. * Lead efforts ensuring compliance and support of corporate records, information management, and data privacy programs. * Ensure adherence to standards of conduct and integrity when managing sensitive financial, customer, and cybersecurity-related data. Minimum Qualifications * Ten or more years of experience with information governance and data management practices and processes. Preferred Qualifications * Experience with GIS, including analysis in ArcGIS Pro. * Experience leading cross-functional project teams. * Strong presentation skills for technical and non-technical audiences. * Masters degree in Geographic Information Systems, Information Technology, Engineering, or related field. * Experience developing tools within ArcGIS Online (AGOL), such as Experience Builder, Survey123, Field Maps, and Dashboards. * Experience working with LiDAR data, point cloud classification, and analysis. * Consulting experience on business issues, including data analysis, SME engagement, and actionable recommendations. * Operational experience within the utility industry. * Experience developing business cases for project proposals, including quantifying qualitative benefits. * Knowledge of Records Management Systems (e.g., SAP, Palantir, ArcGIS, SAS).

Job DescriptionBenefits: • Competitive salary Exodus specializes in manufacturing unique travel trailers catering to the premium market. To learn more visit: . This newly created position will lead production operations during the Exodus Rigs Capax launch phase and into steady vehicle production. Day-to-day activities: As an assembly leader your daily work will be revolving, including overseeing assembly technicians as well as directly performing the installation and assembling walls, windows, doors, floors, roof, electrical harnesses, appliances, plumbing, cabinet installation, assembling metal fabrications, riveting, drilling, milling, routing, stapling, cutting, gluing, trimming, cleaning, screwing, lifting, reporting, and testing. Critical Experience, Knowledge and Capabilities: • Technical Aptitude for Premier / Luxury Vehicle assembly, including success in high-end vehicle production (private jets/aviation, yachts, premium electric vehicles, etc...) and/or leading-edge consumer technology (e.g. battery/solar smart home systems, off road vehicle electronics, aftermarket premium RVs...), • Owns management of the production floor, including day to day tasking, scheduling, nonconformance management, and process engineering, • Can get hands-on with the full scope of vehicle assembly, including part fabrication (including aluminum, premium wood, composite materials, and others), • Building a system that ships on time, every time, • Implement best practices and continuous improvement processes, • Proactive and Effective Communications, both written and verbal, • Maintains a safe and clean working station by following procedures, rules, and regulations., • Ability to support the development of assembly manuals, being familiar with parts lists, subassemblies, tools, and materials., • Assembles components by examining cohesion of parts, fit, and manuals, using various hand and power tools, • Verifies specifications by ensuring quality control, • Resolves assembly problems and notifies supervisors to report or advise on solutions when needed, • Maintains operational equipment by following manufacturer recommendations, • Efficient with all tools and equipment needed for the job, • Ability to lift 50 pounds, • Must be able to work onsite at the Rancho Cucamonga production facility., • 2-5 years of assembly experience in a Premier / Luxury Market, including automotive, technology, RV, or aviation, • Demonstrated track record in the product prototype and pre-launch build phases, • 2+ years overseeing highly skilled assembly technicians, quality control, material managers, and production support teams, • Skilled in all forms of communication, written and verbal, with internal team members, external partners, and potential or current customers, • Flexible, hard-working, and dedicated, with a positive attitude and strong work ethic, • Must be able to pass random drug screenings, • Must possess a valid California Drivers License, • College Degree (Associates or Bachelors) preferred

Job DescriptionSalary: Founded in 1983, Chenbro is a leader in providing technology solutions through design and manufacturing high quality and reliable rackmount system, tower server and PC chassis. Chenbro embraces change to drive innovation to support our customers and their successes. We have successfully developed solid brands and adapt to customers their pace. Addition to forge strategic alliances in delivering OEM, ODM and JDM services with EMS companies, Chenbro also extends business footprint to datacenters and industrial solutions globally. Our US head office is located at Ontario California with service, sales and product branches in New Jersey and Texas. Key Responsibilities: • Responsible for server product mechanical feasibility study, concept and detail design, • Responsible for customization based on OTS server product, • Responsible for server product concept proposal to customers, • Work with PLM and Technical Rep on the proposal and solution execution, • Work with factory for DFM and related drawing and BOM works if necessary Requirements: • Bachelor/masters degree in mechanical engineering, • 3 years or above work experience in design and analysis of Sever, Storage , Desktop or related electronics systems is a plus, • Must have extensive experience with 3D CAD systems (PROE CREO experience required), • Must have excellent working knowledge of mechanical engineering and design principles with specific expertise in the areas of design for large-scale production, sheet metal and injection molding, electrical interconnect systems, heat extraction, • Must be a self-driven individual that has the ability to work independently, regular reporting of progress and status

Job Description Project Engineer – Automotive - Stamping and Assembly ???? Location: Sothern California. | ???? $100K – $130K Join a Growing Automotive & Consumer Products Manufacturer! Full benefits, 401k match, PTO, relocation assistance & more! We’re looking for a Technical Process / Project Engineer with a deep knowledge of Quality Principles in the TS16949 Automotive Space and New Product Launch. Spanish fluency is a huge plus! ???? Key Responsibilities: • Lead New Product / Project Programs for Stamped Metal Parts, • Collaborate with Customers, Production and Engineering Teams, • Conduct Root Cause Analysis and Determine Effective Counter Measures, • Support Prototype Builds and Program Launches, • Champion New Equipment Installations for Technical Assembly, • Knowledge of Fanuc Robots is a Must Have!, • Champion New Program Launches, • Assign work to Junior Engineers and Track Progress, • Manage Overall Project Goals and KPI’s, • Maintain Program Budget’s, • Must have Excellent Reporting Capability and Methodology ✅ Requirements: • Automotive experience Preferred with (PPAP, APQP, AIAG, Stamping Die’s), understanding of TS16949, • Bachelor’s degree with 1 -3 years in Process / Manufacturing Engineering, • Strong Communication, Analysis, and Problem-Solving Skills, • CAD/SolidWorks, MS Project, • Spanish Fluency is a PLUS, • Fanuc Robotics Experience and Ability to Program Robots, • BS in Mechanical Engineering or Industrial Engineering or Equivalent Experience ???? Perks: • Competitive pay + bonus potential, • Full medical, dental, vision coverage, • 401k match, PTO, paid holidays, • Minimal travel + lifestyle perks, • Excellent growth & promotion potential ???? Join a high-growth company where innovation, quality, and leadership are valued! ???? Call Top Dog Engineers: 601.607.8217

Job Description TITLE: Buyer DIVISION: Purchasing REPORTS TO: Purchasing Manager FLSA CLASSIFICATION: Exempt/Salary Gold Star Foods is the leading food distributor to K-12 schools in the United States. We are a company devoted to providing our customers with incredible customer service. We know that it is our teammates who make the difference! Join our team and find out what it is like to work somewhere where you enjoy getting up for work every day! POSITION OVERVIEW: The Buyer, under the direction of the Purchasing Manager, plays a critical role in ensuring that the Organization’s purchasing needs are met efficiently and cost-effectively. They must be able to communicate effectively with vendors, suppliers, and internal teams, and pricing, and analyze purchasing data to optimize purchasing processes. PRINCIPLE RESPONSIBILITIES: • Research and evaluate vendors and suppliers based on price, quality, availability, reliability, possible subs and technical support., • Ensure timely delivery of goods and services to meet company needs., • Collaborate with internal teams such as sales, category management, operations, and logistics to determine purchasing needs and requirements., • Develop and implement purchasing strategies that align with the company’s business goals and operational needs, • Participate in vendor performance meetings with Category Management., • Monitor and maintain inventory levels to avoid stockouts and overstocking., • Mitigate potential supply chain disruptions, including diversifying alternative solutions., • Evaluate market trends and pricing to ensure competitive pricing and sourcing of products and services., • Develop and maintain strong relationships with suppliers and vendors., • Maintain accurate records of purchases, pricing, and delivery dates., • Analyze purchasing data to identify cost-saving opportunities and optimize purchasing processes., • Follow and implement procurement policies and procedures to ensure compliance with regulations and company policies., • Under the direction of the Purchasing Manage, Supervisor, and Senior Buyer, will receive procurement objectives, including assigning tasks, and setting goals., • Performs other duties as assigned. REQUIRED SKILLS: • Supplier relationship management, • Inventory Management, • Procurement Ethics, • Strong on negotiation, communication, and interpersonal skills., • Excellent analytical and problem-solving skills., • Proficient in Microsoft Office and purchasing software systems., • Knowledge of procurement regulations and procedures, • Ability to work independently and as part of a team., • Strong attention to detail and organizational skills. EDUCATION/EXPIERENCE: • Bachelor’s degree/associate’s degree in business, supply chain management, or related field is a plus but not a requirement or 2-4 years of experience in procurement, purchasing role, or related field. WORKING CONDITIONS AND PHYSICAL DEMANDS: Professional office environment. Primary office environment is ambient room temperatures, lighting and traditional office equipment as found in a typical office environment. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential duties of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Individuals may need to sit or stand as needed. May require walking primarily on a level surface for periods throughout the day. Reaching above shoulder heights, below the waist, or lifting as required to file documents or store materials throughout the workday. Proper lifting techniques are required May include lifting up to 25 pounds on occasion. EOE M/W/Vet/Disabled The above duties and responsibilities are essential job functions subject to reasonable accommodation. All job requirements listed indicate the minimum level of knowledge, skills and/or ability deemed necessary to perform the job proficiently. This job description is not to be construed as an exhaustive statement of duties, responsibilities or requirements as the employee may be required to perform any other duties as assigned. In the event of an absence where the teammate cannot perform these duties, the Manager will determine who shall perform these duties. Affirmative Action Statement: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status, or any other protected factor under federal, state or local law.

Job Description Project Managers Assistant spend the majority of time managing, coordinating and/or supporting activities related to the execution of major company projects. Project Managers accomplish work through matrixed employees/teams/vendors who are not direct reports but for whom the incumbent has direct accountability to lead and achieve project objectives. Project Managers lead a project from start to completion. Project Managers coordinate activities, resources, equipment, and information necessary for project completion, maintaining project plans, reports, and technical documents, and serving as a point of contact for the project team ensuring effective communication and team coordination. Project managers lead planning, monitoring, and management of internal projects including complex, multi-year initiatives within and across OUs such as Finance, Regulatory, HR, Engineering, Transmission & Distribution, Legal, Customer Support, and Administrative Services as well as construction projects, infrastructure investment, and new facilities from initiation through completion. They lead development of project, resource, and staffing plans, secure required resources, track and report on progress, troubleshoot issues and ensure project results meet requirements regarding technical quality, reliability, schedule, cost and regulatory requirements. They monitor performance and recommend schedule changes, cost adjustments or resource additions including determining how changes will impact status, budget and timeline. Project Managers are assigned to a new project that could be in any OU or Function. The primary purpose of the Project Manager role is to improve the success rate of projects by applying project management principals, methods, tools and standards. Individuals are typically certified as Professional Project Managers and apply their knowledge and experience in a variety of functions and projects across SCE. Responsibilities: • Distributing communications, • Coordinating meetings, • Supporting user readiness activities, • Steering Committee Decks (PowerPoint presentations), • Action item management, • Manage requests for new additions to training classes including ensuring in Training Environment, production environment, • Mapping employees to training classes, • Providing list of classes, instructors and participants, • Ensuring training has been scheduled through EL&D, • Rescheduling training when employees have missed, including make up sessions, • Reaching out to coordinate when field resources can be pulled out of field for training, • Obtaining classrooms in the districts/regions, • Tracking training completion, • Managing passwords in training environment Education: bachelor's degree in applicable profession, business, or technical discipline or an equivalent combination of education, training, and experience. Work Experiences (Years): • Typically possesses or 3 or moreyears of project management experience., • Project Management certification is strongly preferred.

Job Description The Arcticom Group (TAG) is seeking a results-oriented Regional Sales Manager to grow our HVAC and Refrigeration (HVAC/R) service business in [Washington (Puyallup area) or Southern California (Inland Empire / Orange County)]. This is a high-impact, individual contributor position focused on new business development and territory expansion. The Regional Sales Manager will be responsible for hunting new accounts, building relationships with single and multi-site commercial property owners and operators, and driving revenue growth through persistence, professionalism, and customer-focused selling. This is not a management position — it’s a boots-on-the-ground outside sales role for a true hunter who thrives on prospecting, cold calling, door-to-door outreach, and closing deals. Key Responsibilities • Generate new business by proactively prospecting, cold calling, and networking within the assigned region., • Sell HVAC/R service solutions to single-location commercial owners, operators, and facilities managers., • Identify, qualify, and convert prospects by managing the complete sales cycle from first contact to signed agreement., • Prepare and present service proposals independently with strong business acumen and attention to detail., • Partner with regional operations teams to ensure seamless service delivery and excellent customer experience., • Maintain accurate sales pipeline, forecasts, and CRM data to track activity and performance metrics., • Stay informed on HVAC/R systems, service offerings, and market trends to effectively position value-based solutions., • 5+ years of proven success in outside B2B sales, ideally within HVAC/R services, facilities management, or commercial services industries., • A hunter’s mindset — self-motivated, persistent, and passionate about winning new business and exceeding sales goals., • Excellent communication and relationship-building skills, with the ability to engage small business and property owners effectively., • Strong closing and negotiation skills, capable of developing proposals and contracts with minimal technical or administrative support., • Highly organized, able to manage multiple sales opportunities, priorities, and follow-ups simultaneously., • High school diploma or GED required; Bachelor’s degree preferred in business, marketing, or a related field., • Competitive base salary with uncapped commission potential., • Opportunity to make a direct impact on regional growth and customer success., • Supportive leadership and collaborative operations team focused on quality and reliability., • A chance to represent The Arcticom Group’s trusted HVAC/R services that keep critical commercial environments running smoothly.

Job Description Our client, a leading manufacturer of aero and industrial gas turbine components, is a globally recognized public company with more than 75 years of innovation, growth, and technical excellence. Renowned across the aerospace industry, this organization fosters a culture that values continuous improvement, professional development, and inclusion. Recognized by Forbes as one of the World’s Best Employers, the company has earned a reputation for its commitment to employee success, forward-thinking leadership, and global impact in the aerospace and energy sectors. Why Consider Joining Our Client Joining this organization means becoming part of a company that truly invests in its people — where performance meets purpose. Here’s what sets them apart: • Publicly traded global leader on a sustained path of growth and innovation, • Recognized by Forbes as a Top Global Employer, • Exceptional insurance coverage and 401(k) match — both effective on day one, • Employer contribution to your Retirement Savings Plan every pay period, • A vibrant, collaborative culture where cross-functional teams thrive, • Professional development through extensive training programs and continuous learning, • Free on-site fitness center membership promoting work-life balance Beyond the benefits, you’ll join a company that drives technological advancements, shaping the future of sustainable aerospace and industrial power generation. Position Overview This position provides hands-on financial and operational support to the site’s Finance Lead. The analyst will help manage day-to-day accounting activities, assist with the month-end closing process, and deliver timely internal reporting. Key areas of focus include cost tracking, budget control, and performance analysis across plant operations. Key Responsibilities • Support monthly, quarterly, and annual closing cycles by preparing journal entries, reconciliations, and reports., • Analyze production costs and inventory movements to identify trends, variances, and improvement opportunities., • Maintain and reconcile labor, payroll, and benefits-related accounts., • Manage and track capital spending and fixed asset records., • Partner with leadership to prepare budgets, forecasts, and long-range financial plans., • Assist with both internal management and external audit requests., • Provide ad hoc analysis on plant performance, spending patterns, and cost-reduction initiatives., • Participate in inventory counts and related reconciliation activities., • Create and improve spreadsheets, databases, and tools to enhance data accuracy and team efficiency., • Document and refine financial processes to ensure consistency and compliance. Additional Duties • Investigate cost variances and provide clear explanations of root causes., • Contribute to financial review materials and executive summaries., • Support compliance with company policies, accounting standards, and environmental and safety regulations., • Provide training and support to peers on financial systems and reporting tools., • Act as a backup for daily financial tracking, cash flow monitoring, and labor utilization reports. Qualifications • Bachelor’s degree in Accounting, Finance, or related field (CPA/CMA preferred)., • Minimum of 2 years of financial experience with manufacturing companies., • Strong analytical, Excel, and ERP system skills., • Excellent communication and problem-solving abilities., • Prior experience in a manufacturing or cost accounting environment is highly desirable.

Job Description Overview: Core States Group designs, builds, and manages programs and projects across North America and has been recognized on top lists throughout the architecture, engineering, and construction (A/E/C) industry. Established in 1999, the company offers integrated solutions with seamless continuity, and many of the world’s most notable brands count on Core States Group to deliver speed to market, cost certainty, and compelling design. With 23 offices across the United States and Canada, Core States Group is an industry powerhouse that drives innovation and improves everyday life for countless people across several markets, including Convenience, Distributed Generation, Financial, Grocery, Housing, Industrial, Restaurants, Retail, Semiconductor, Tribal, Zero-Emission Vehicle (ZEV) Infrastructure, and more. Visit us at . Summary of Position: As a Mechanical Engineering Designer, you’ll get hands-on experience working on real projects across the U.S. while learning directly from seasoned engineers. Your degree can lead you to: • HVAC & Plumbing design, • Refrigeration This is your chance to grow, learn, and contribute to projects that shape communities, all while building the foundation for an exciting career in architecture and engineering. Essential Duties and Responsibilities: • Apply civil engineering concepts to develop solutions to project challenges, • Preparation of construction plans, cost estimates, reports, and other project documents, • Coordination with review agencies, clients, and sub-consultants for permit application, • Preparation of grading plans, profiles, road design, and details using AutoCAD Civil 3D, • Research regulatory requirements and design standards, • Perform detailed and complex calculations for storm water facilities, utility systems, and roadway improvements, • Preparation of detailed technical reports and project presentation materials, • Assist project engineers in completing projects in a timely manner and within project budgets, • Attend project meetings Qualifications: • Currently enrolled as a Senior, graduating with a Bachelor's degree in Mechanical Engineering in Winter 2025 or Spring 2026, • EIT is a plus but not required, • Experience working with Revit and AutoCAD software is a plus Team: You will work with a team of Designers, Professional Engineers and Project Managers. Work Location: This role can be based out of various of our office locations, including Kent, WA; Bellevue, WA; Puyallup, WA; Richland, WA; Chehalis, WA; Roseville, CA; Ontario, CA; Bentonville, AR; Farmers Branch, TX; Philadelphia, PA; West Chester, PA; Tampa, FL; and Somerville, NJ. Only candidates in close proximity to these locations will be considered. Benefits: • COMPENSATION – Competitive wages and bonus programs, • RETIREMENT – We offer a great 401(k) match to help you invest in your future and grow your retirement savings with confidence., • HEALTHCARE – Excellent health benefits, life insurance options, and supplemental benefit options, giving you the flexibility to choose the coverage that best fits your needs and lifestyle., • VACATION – Generous PTO time to help you recharge, relax, and maintain a healthy work-life balance., • PERKS – Team wellness challenges, Costco membership reimbursement, half-day Fridays during summer months + much more!, • WORK-LIFE BALANCE – A flexible work environment that supports a healthy work-life balance, whether you’re in the office, working remotely, or somewhere in between., • PAID PARENTAL LEAVE – Four weeks of fully paid parental leave to give you time to bond with your new addition and support your growing family., • TUITION REIMBURSEMENT – Advance your education with support! We offer tuition reimbursement to support your learning journey. Note: Please do not be concerned if you do not meet every requirement. At Core States we are dedicated to building a diverse and inclusive workplace, so if you are excited about this role but your experience does not align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles. This position will remain open until it is filled.