Trabajos technical support en San Antonio, Texas - Page 4Crear alertas

Job Description The START Center for Cancer Research (“START”) is the world’s largest early phase site network, fully dedicated to oncology clinical research. Throughout our history, START has provided hope to cancer patients in global community practices by offering access to cutting edge trials throughout the US and Europe. Today, with over 1,300 studies completed, and with research facilities in the United States and in Spain, Portugal, and Ireland, START’s mission is to accelerate the development of new anticancer drugs that will improve the quality of life and survival for patients with cancer and lead to its eventual cure. To date, over 43 therapies conducted at START locations have obtained FDA/EMA approval. Incredibly, while Academic Medical Centers (AMCs) conduct 80% of cancer trials, such trials reach only 20% of the patient population – leaving the majority of patients who are treated in community practices and hospitals without access to a clinical trial when their care journey calls for one. START serves the many – by bringing cancer trials to physicians and their patients in community hospitals and practices when hope is needed most. START represents the world’s largest roster of Principal Investigators (PIs) across its eight clinical trial sites. Committed to accelerating passage from trials to treatments, START delivers hope to patients, families, and physicians around the world. As an example, in San Antonio, where START was founded, START treated the first patient ever with Keytruda – the most effective cancer drug in medical history. We are hiring an Infusion Nurse for our START San Antonio office. The Infusion Nurse is responsible for providing direct patient care to individuals who are participants in research protocols that are conducted at START. The Infusion Nurse uses appropriate professional judgment and decision-making in planning and providing care. Nursing care is to be delivered in a manner consistent with the Standard Operating Procedures and standards of practice, and professional evidence-based standards. Hours: Monday through Friday, 8:00-4:30 Essential Responsibilities • Patient Care: Administer chemotherapy, immunotherapy, and investigational agents per protocol; perform venipuncture, IV insertion, central line management, ECG collection, and vital signs monitoring., • Participant Support: Educate patients about clinical trials, procedures, drug administration, and potential side effects; prioritize patient dignity, safety, and welfare., • Observation and Documentation: Assess patient well-being, document adverse events, and respond to emergencies using nursing standards., • Protocol Compliance: Collaborate with the study team to complete all study-related procedures, including drug administration, labs, and ECGs., • Planning and Communication: Prepare clinic supplies, maintain EHR quality standards, and communicate changes in patient status to providers., • Mentorship and Collaboration: Train and mentor staff; interact positively with peers, patients, and families while respecting cultural diversity and confidentiality., • Quality and Technical Skills: Provide high-standard care using nursing judgment; stay current on emergency certifications and policies. Education & Experience • High School Diploma or GED., • Licensed Registered Nurse in state of practice., • Basic Life Support (BLS) certification, and AHA certified program., • Previous experience in peripheral IV insertion and management of venous access device(s). Preferred Education and Experience: • 1 year of experience., • Oncology Certified Nurse (OCN)., • Clinical Trial and oncology experience., • Experience working with Microsoft Office, including Teams, Excel and Word., • Advanced Cardiac Life Support (ACLS) Certification, an AHA certified program. Can be obtained within 90 days of hire., • ONS/ONCC Chemotherapy Immunotherapy Certificate™. Can be obtained within first year of employment. Best-in-Class Benefits and Perks We value our employees’ time and efforts. Our commitment to your success is enhanced by a competitive compensation, depending on experience, and an extensive benefits package including: • Comprehensive health coverage: Medical, dental, and vision insurance provided, • Robust retirement planning: 401(k) plan available with employer matching, • Financial security: Life and disability insurance for added protection, • Flexible financial options: Health savings and flexible spending accounts offered, • Well-being and work-life balance: Paid time off, flexible schedule, and remote work choices provided Ready to be part of a team changing the future of cancer treatment? Join us in our mission to conquer cancer, one clinical trial at a time. Your expertise and dedication can help us bring hope and healing to patients worldwide. Please submit your application online. We are an equal opportunity employer that welcomes and encourages diversity in the workplace. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description Come make your mark with Watermark! 🎖️ FOUNDED BY USAF VETERANS in 2007, we are proud to be a Service-Disabled Veteran Owned Small Business. 🌎 SUBJECT MATTER EXPERTS specializing in security and risk management. We’re intimately familiar with DOD security programs and mission requirements. ⭐ OUR CORE VALUES drive every action we take as a company. We strive to exhibit PERSPECTIVE, PASSION, COMMUNICATION, INTEGRITY AND ETHICS, and BALANCE in all we do. 💲 COMPETITIVE BENEFITS PACKAGE to address our employees’ physical, mental, emotional, and financial well-being. This includes 100% employer- paid medical insurance, ample paid leave, a free employee assistance program, and a competitive 401k savings plan. At Watermark, our people come first! Information Systems Security Officer III The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system and as such, works in close collaboration with the ISSM and ISO. The position shall have the detailed knowledge and expertise required to manage the security aspects of an information system and, in many organizations, is assigned responsibility for the day-to-day security operations of a system. This also will include physical and environmental protection, personnel security, incident handling, and security training and awareness. It will be required to work in close coordination with the ISSM and ISO in monitoring the information system(s) and its environment of operation to include developing and updating the authorization documentation, implementing configuration management across authorization boundaries. This will include assessing the security impact of those changes and making recommendation to the ISSM. The primary function is working within Special Access Programs (SAPs) supporting Department of Defense (DoD) agencies, such as HQ Air Force, Office of the Secretary of Defense (OSD) and Military Compartments efforts. The position will provide “day-to-day” support for Collateral, Sensitive Compartmented Information (SCI) and Special Access Program (SAP) activities. In this role you will… • Develop physical or logical topologies for a system, • Assist the ISSM in meeting their duties and responsibilities, • Prepare, review, and update authorization packages, • Ensure approved procedures are in place for clearing, sanitizing, and destroying various types of hardware and media, • Notify ISSM when changes occur that might affect the authorization determination of the information system(s), • Conduct periodic reviews of information systems to ensure compliance with the security authorization package, • Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM and AO/DAO prior to the change, • Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly, • Ensure all IS security-related documentation is current and accessible to properly authorized individuals, • Ensure audit records are collected, reviewed, and documented (to include any anomalies), • Attend required technical and security training (e.g., operating system, networking, security management) relative to assigned duties, • Execute the cyber security portion of the self-inspection, to include provide security coordination and review of all system assessment plans, • Identify cyber security vulnerabilities and assist with the implementation of the countermeasures for them, • Prepare reports on the status of security safeguards applied to computer systems, • Perform ISSO duties in support of in-house and external customers, • Conduct continuous monitoring activities for authorization boundaries under your preview, • Assist Department of Defense, National Agency and Contractor organizations with all RMF efforts, • 5-7 years related experience, • Current Top Secret Clearance with SCI Eligibility, • Eligibility for access to Special Access Program Information, • Reports to a physical location which occasionally requires the ability to traverse between buildings, • May require sedentary work at least 50% of the time, • Must be able to regularly list up to 50 lbs, • Ability to manage stress with a high degree of maturity/professionalism, • Demonstrated critical thinking and leadership skills and the ability to work well with others, • Effective verbal and written communication skills, • All Level I & Level II positions - candidate should possess some Special Access Program (SAP) experience Watermark is an equal opportunity employer. All terms and conditions of employment are established without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, veteran status, or any other protected category under applicable federal, state, and local laws. Powered by JazzHR 391TWVvRQ0

Job Description Project Overview: The Proposal Manager will manage the technical formulation of major opportunity win themes and strategies as well as lead formulation of proposals and technical documents. The Proposal Manager will oversee the proposal development activities from pre-proposal planning to final production, delivery, and capture of lessons learned. Will provide guidance to proposal development teams (i.e., technical staff, writers, subject matter experts, etc.), write proposals, promotional, corporate documents as well as review requests for proposals (RFP), request for information (RFI), and a wide variety of other bid requests. The Proposal Manager will lead the process to create and submit responses involving internal systems and solutions in a format that meets the requirements and evaluation criteria identified in the requests. The Proposal Manager must ensure adherence to deadlines and attention to detail. They will support long-term strategy development including methods and approaches to achieve company new business objectives and report to the Chief Business Development Officer. Primary Responsibilities: • Full life cycle of proposal development, including planning, scheduling, and managing competitive proposals; Take end-to-end ownership and command of proposal development and related support processes, • Analyzing RFP requirements; creating the proposal schedule, outline, and compliance matrix; Managing diverse teams from various prime, subcontractor, and consultant organizations; Ensuring RFP compliance; Performing in a time-sensitive environment; writing proposal sections, as needed, • Serve as a writer, editor, and/or reviewer when not managing a proposal., • Collaborate with capture, proposal, program management, and technical subject matter experts to develop and articulate technical, management, and phase-in solutions., • In concert with the Capture or Program Manager, plan, coordinate the schedule for, select the membership of, and lead effective, results-driven storyboarding, kickoff, and review meetings. Be proactive in the conceptualization and development of strategic win themes and discriminators., • Identify and adhere to proposal development schedule., • Use a proposal calendar for each assigned proposal effort. Calendar must contain all color reviews, and other proposal development milestones, including deadlines for packaging and delivery., • Critical attributes include exceptional communication, teamwork, flexibility, organizational capacity, ability to motivate and energize team participation, • Experience in both task order proposal and large, multi-faceted proposals that include oral presentations, client reference checks, technical volumes, past performance volumes, cost volumes, and management volumes. Contribute to T&T proposal activities and all other duties as assigned by T&T managers. Required Skills & Qualifications: • Must have the management skills required to direct and orchestrate large, fast-moving proposal team efforts, • Ability to manage multiple initiatives simultaneously., • Proven ability to conceptualize and write compelling, marketing-oriented proposal narrative as required, • Working knowledge of MS Office and Adobe Acrobat business applications. Required Education/Experience: • Bachelor’s degree in Political Science or English major or other related fields. An equivalent combination of education and experience from which comparable knowledge and skills may be acquired., • Minimum of three (3) years of progressive proposal management experience using Shipley methodology in a fast-paced, deadline-driven, high-volume proposal environment for a federal support services contracting firm, • Three (3) years of experience in implementing and documenting the formal capture and proposal processes for an established or growing company., • Experience in supporting through the proposal development process and providing technical and management solutions., • 3+ years of Proposal writing experience for a government contract., • 3+ years of experience responding to solicitations from Federal Government clients. • Experience with competing for and winning Government services., • 3+ years of experience managing multiple concurrent response efforts/initiatives simultaneously., • Membership in APMP or other large proposal development focused organization is preferred, • Completion of 3-5 industry recognized proposal management training courses Equal Opportunity Employer/Veterans/Disabled

Job Description The EHS Culture starts with you. As our Sr. EHS Manager, you set the tone for our growing and dynamic company. Your role is a combination of reducing risk, preventing injuries, monitoring environmental and safety compliance, and creating an EHS culture. You’ll be part of a team environment – working directly with the EHS, Corporate, Region, and other supporting leadership. You are accountable for helping create, develop, and administer the EHS strategy and operating rhythms. You are encouraged to be innovative and collaborative. The Sr. EHS Manager provides leadership within the Region locations and its functional framework, while partnering with TRP Leaders to establish vision and strategy and advance a culture of EHS throughout these locations. Will develop and oversee comprehensive EHS programs, ensuring regulatory compliance and fostering a strong culture within an organization. The role will also provide technical and compliance expertise, support the day-to-day region operations of health and safety, and ensure proper reporting practices of all injuries, health and safety concerns, environmental regulatory compliance, audit/inspection corrective actions, safety matters, and motor vehicle collisions. Requirements § Support TRP with establishing the “ROAD TO ZERO” safety culture by working closely with the EHS Leadership Team to implement proactive methods to drive the EHS programs, policies, and procedures through your assigned region. § The development of health and safety programs and standards at an Enterprise and Region level is accountable for achieving year-over-year reductions in the frequency and severity of occupational injuries, illness, incident, and motor vehicle collisions. § Providing strategic vision, leadership, and operational execution of environmental, health, and safety performance consistent with TRP expectations. § Leads safety programs including, but not limited to ergonomics, behavior-based safety, incident reduction, worksite analysis, hazard prevention and control, and employee engagement. § Supports the development and implementation of TRP – EHS Strategic Initiatives – internal EHS Management System and performance. § Serves as an EHS subject matter expert and coaches others within the region operations. § Researches, evaluates, and recommends changes to improve the EHS performance. § Provides support to the Region during regulatory inquiries, enforcement proceedings, and litigation. § Provides visibility on EHS progress, performance, and issues to the Sr. Director, Executive VP of EHS and Operational Leadership Teams. § Provide daily and continuous EHS support to the EHS Team and locations. § Implement and monitor compliance with federal and state H&S regulations and TRP Company EHS – SOPs and Policies. § Ensure effective and sustainable EHS Management System, programs, and processes are in place. § Partner with and educate region functions to assure that employee safety, practices, and compliance with EHS regulations are supported. § Establish, input, and report metrics pertinent to the EHS activities. § Manage EHS job functions for duties such as facility and jobsite observations, risk assessments, EHS training and compliance, workplace incident analysis, ergonomic assessments, traffic control measures, EHS inspections, corrective action/preventative action status, data collection and analysis of internal audits and systems. § Conduct compliance reviews, general risk assessments and other EHS assessments to support the TRP – EHS Management System program. § Provide daily guidance and direction in EHS programs to the Region and TRP Leadership to ensure a common and effective approach. § Coach, train, guide, support, and mentor the EHS Team through the TRP - EHS Management System. § Review all accidents/incidents and motor vehicle collisions which occur and investigate, analysis, reporting, and managing of the corrective actions. § Lead, participate, and support severe/critical incident investigations and Root Cause Analysis as needed. § Ability to work with employees and leadership to achieve cultural change. § Bachelor’s degree in Environmental, Health & Safety or related field required. Master’s Degree is preferred. § 8-12 years of work experience in the EHS field § Professional EHS certifications are preferred. § 6 years of leadership responsibility. § 6 years of multi-site responsibility. § Extensive knowledge of EHS regulations and compliance standards. § Proven track record of successful EHS program development and implementation. § Strong leadership, communication, interpersonal, and team management skills. § Experience in the development and implementation of an EHS Management System § Proficient skills in Microsoft Office software applications, software management systems, EHS management systems and reporting platforms. Benefits · Health Insurance · Dental Insurance · Vision Insurance · Life Insurance · Short-Term Disability Insurance · Long-Term Disability Insurance · 401k

Job Description Toyoda Gosei Texas is looking for a Paint Maintenance Supervisor for our San Antonio, Texas plant! Position Title: Maintenance Supervisor Department: Maintenance Location: Toyoda Gosei Texas Reports To: Maintenance Manager Job Summary The Maintenance Supervisor is responsible for overseeing and coordinating the daily activities of the maintenance team across both shifts. This role ensures timely completion of preventive maintenance (PM), repairs, and continuous improvement (Kaizen) initiatives. The supervisor will drive safety, equipment reliability, and process efficiency while maintaining strong communication with internal customers and other departments. This position plays a key role in sustaining plant operations and supporting production goals through proactive leadership and technical oversight. Key Responsibilities * Plan, assign, and confirm daily maintenance activities for all shifts. * Report daily equipment downtime, Kaizen progress, and problem follow-up sheet status during management meetings. * Conduct audits of PM completion, including weekend activities, and provide daily status updates. * Ensure proper execution of repairs and preventive maintenance to minimize downtime and extend equipment life. * Support a safe working environment by enforcing safety procedures and leading safety-related initiatives. * Mentor and train maintenance team leaders and members to meet targets in Safety, Quality, Cost, and Machine Efficiency. * Oversee the use and condition of tools and equipment; ensure proper 5S practices are followed consistently. * Coordinate and execute internal audits and Kaizen projects in support of TGTX's management systems. * Assist with development and tracking of departmental expense and capital budgets. * Supervise special projects and support other departmental priorities as assigned by management. Required Qualifications * Minimum 5 years of supervisory experience in a maintenance role within a manufacturing environment. * Minimum 3 years of maintenance shop management experience. * Strong working knowledge of preventive maintenance, troubleshooting, and machine repairs (including overhauls). * Proficient in reading blueprints, electrical schematics, and using PLC systems for diagnostics. * Ability to generate and present reports using Microsoft Office (Excel, Word, PowerPoint). * High School Diploma or GED required. * Must be available to work overtime, weekends, and nights as required by management. Physical Requirements * Ability to lift up to 50 lbs. * Must be able to bend, squat, kneel, and climb ladders or elevated platforms. * Able to stand and walk for extended periods in a production environment. * Comfortable using scissor lifts and boom lifts as required. Working Conditions * Frequent work on the manufacturing floor and in the maintenance shop. * May operate and maintain a wide range of production equipment (e.g., robots, conveyors, dryers, ovens). * Occasional use of overhead cranes and handling of chemical solutions for water treatment. * Exposure to various weather conditions when working with outdoor equipment. * Use of PPE is mandatory (e.g., safety shoes, hard hats, safety glasses, gloves). Toyoda Gosei is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Job Description Raba Kistner, Inc. is a premier Engineering Consulting and Program Management firm. Our purpose is to build a better and more sustainable world for our employees, their families, our clients, and the communities we serve. Our Core Values are: • Community "We care for our communities", • Integrity "We act with integrity", • Passion "We infuse passion into everything we do", • Quality "We believe quality comes from a culture of innovation and continuous improvement", • Conducting Clean Water Act Section 404 (surface water and wetland) investigations in support of transportation, energy, water, and other infrastructure projects., • Prepare ecological and water resource technical reports based on desktop and field assessments., • Prepare environmental review documents complying with the National Environmental Policy Act (NEPA) for various infrastructure types, project sponsors, and lead agencies., • Lead field crews conducting ecological studies, and directly participate in these activities., • Direct involvement in cost proposal development., • Adhere to defined scopes of work and budgets, and identify change orders early during the project., • Identify specialty subcontractors, as needed, and oversee their work., • Identify potential business opportunities during and outside of active project activities., • Understand, adhere and participate in the Raba Kistner Health and Safety and Quality Management Systems and set a good safety example., • A Bachelor's degree in Biology, Wildlife Ecology, Environmental Science, or a closely related field (Master’s degree is preferred)., • Minimum 3 years of experience conducting ecological studies and preparing environmental documents in support of NEPA compliance in the transportation, energy, water, and other sectors., • Minimum 3 years of experience conducting rare/protected species habitat evaluations and making impact/effect calls. Preferred experience & certifications: • Preparing one or more of the following documents: Categorical Exclusions, Environmental Assessments, Environmental Impact Statements, Federal Energy Regulatory Commission filings, HUD Environmental Review Records, TWDB Environmental Information Documents, Presidential Permit Applications, and others., • Conducting migratory bird nest surveys and preparing reports of findings., • One or more of the following Individual TxDOT pre-certification work categories: 2.1.1 (Traffic Noise Analysis), 2.2.1 (Air Quality), 2.3.1 (Wetland Delineation), 2.4.1 (Nationwide Permit), 2.4.2 (Individual Permit), 2.4.3 (US Coast Guard & ACOE Permits), 2.6.1 (Protected Species Determination Habitat), 2.6.2 (Impact Evaluation Assessment), 2.6.3 (Biological Surveys), 2.14.1 (Environmental Document Preparation or others. While performing the functions of this job, the employee is regularly stand, walk, sit, use hands to finger, handle or feel, reach with hands and arms, climb or balance, stoop, kneel, crouch or crawl, talk or hear, taste or smell, and drive vehicle short and/or long distances. Occasionally utilize hand tools such as sledge hammers, shovels, and picks. Occasionally required to lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, far vision, color vision, peripheral vision, focus vision and depth vision. The noise level in the work environment is usually moderate (business office with computers/printers, light traffic, etc.) or loud. Potential exposure to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, outdoor weather conditions, risk of electrical shock, all of which would require employee to follow proper safety procedures and utilize appropriate protective equipment. Position may require protracted or irregular hours. Flexibility to work irregular hours is necessary due to client needs. Work responsibilities require out of town travel to Raba Kistner offices, client offices and project locations. EOE/Disabled/Veteran Drug Free Workplace

Job Description The Registered Nurse renders highly professional and technical nursing care to assigned patients with mental health disorders or substance abuse use. Provides direct and indirect patient care using the nursing process (assessment, planning, implementation, and evaluation). Directs and supervises other assigned team members and collaborates with multidisciplinary team members to provide age/developmentally appropriate care in accordance with unit standards of care. Essential Duties: • Provide direct care to patients, which includes facilitating social and emotional needs, supervising medication schedules and evaluating patient progress., • Manages team comprised of LVN(s) and MHT(s) to ensure effective patient care delivery and achievement of desired patient outcomes., • Collaborate with a variety of interdisciplinary professionals to determine and provide the best possible care for their patients., • Ensure the correct administration of medication, including injections, and monitor the results of treatment, • Respond to distressed patients in a non-threatening manner and attempt to understand the source of their discomfort, • Provide social support for patients by creating and encouraging patients to take advantage of opportunities such as support groups, social activities and other therapeutic measures., • Build relationships with patients to encourage trust, while listening to and interpreting their needs and concerns, • Help patients manage their emotions through de-escalation techniques, • Responsible for maintaining a safe environment on the unit., • Conducts intake assessments through interviews with patients and relatives to gather case history., • Plans and provides nursing care for patients., • Makes nursing diagnosis of the medical and emotional status of patients and recommends treatment options., • Consults with psychiatrists and other behavioral health staff in designing appropriate treatment plans for clients., • Administers and notes reactions to psychotropic drugs and other medications., • Arranges further medical attention when necessary., • Assists the client in understanding the nature of emotional disturbances and accepting the need for treatment., • Keep accurate written charts and records of patient activities and progress. Comply with laws, rules, regulations, protocols, and procedures., • Use professional judgment to ascertain and to apply appropriate intervention techniques with patients in crisis., • Assists in maintaining a safe and secure environment for staff and patients., • Test for vital signs of pain and ensures treatments of pain., • Documents all patient information on medical charts and follows physician’s written orders., • Maintains patient confidentiality., • Maintains accurate records and documentation of patient treatments, immunizations and laboratory results according to standard medical record keeping. Requirements Education and/or Licensure – ADN/BSN or equivalent. Must possess current RN licensure in the State of Texas by the Nursing Board. Must possess or obtain a valid CPR certification and SAMA training within 30 days of hire. Experience – None required. Prior psychiatric healthcare experience helpful. Additional Requirements – None Knowledge Skills and Abilities • Must be able to concentrate on work amidst distractions such as noise, conversations and foot traffic; must be able to consistently meet deadlines; and finish all food preparation at specified serving time; must be flexible in work hours in order to meet patient and organization operating needs., • Must maintain self-control in volatile or hostile customer services interactions., • High school level reading and writing skills; acceptable oral and written communication skills along with legible handwriting., • Customer service skills in face to face interactions with dealing courteously with patients, the public, and other staff within the organization., • Use of appropriate social skills, including demonstration and respect for patients and staff; empathy toward patients; skills in teaching or assisting with activities of daily living helpful., • Must be able to work independently, in a result restricted physical environment for extended periods of time., • Skill to independently interpret reference materials to comply with law, rules, regulations, policies, procedures, etc., • Ability to apply time management practices to prioritize, schedule and complete work effectively to comply with mandated policies and deadlines. Perform the following with or without reasonable accommodations: • Ability to stoop, kneel, crouch, crawl, reach, stand, walk, push, pull, lift, grasp, and be able to perceive the attributes of objects such as size, shape, temperature, and/or texture by touching with skin, particularly that of the fingertips., • Ability to express and exchange ideas via spoken word during activities in which they must convey detail or important spoken instructions to others accurately, sometimes quickly and loudly., • Hearing to perceive the nature of sound with no less than 40 db loss @ Hz, 1000 Hz, and 2000 Hz with or without correction; ability to perceive detailed information orally and make fine discriminations in sound., • Perform repetitive motions with wrists, hands, and fingers. Individual must be able to exert up to 100 pounds of force occasionally and to be able to lift, carry, push, pull, or otherwise move objects., • Light work most of the time, exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently; and occasionally medium work, that is exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently., • Work requires a minimum standard of visual acuity with or without correction that will enable people in the role to complete administrative and clerical tasks, as well as inspect and analyze., • Must be able to work and concentrate amidst distractions such as noise, conversation and foot traffic; ability to handle interruptions often and be able to move from one task to another., • 401K Retirement Plan

Job Description The SITECH General Manager is responsible for setting and achieving SITECH’s short and long-term strategic plans in alignment with the company's Vision, Mission, and Values. The successful candidate will demonstrate strong strategic planning and tactical execution skills, with a demonstrated passion for personal and team development leading to successful outcomes for internal and external customers. SITECH delivers customer value through Sales, Product Support, and Services; supporting technologies that enhance construction jobsite productivity and efficiency. An intimate understanding of contractor and dealership operations, and the role of survey and machine guidance technologies is required. The GM evaluates, allocates and directs all human, physical and financial resources within SITECH. The incumbent in this position is expected to model the following practices daily: 1. Demonstrate alignment with the company's mission and core business values 2) Collaborate with key internal/external resources, 2. Participate in ongoing self-development, 3. Execute Positive Business Results Essential Functions: • Models, promotes, reinforces, and rewards the use of SITECH’s Values Based Leadership (VBL) tools, models, and processes to ensure that they are effectively and consistently put into action, • Understand customer needs in the field of construction technology and build value for customers, • Develop, Promote, Implement and Monitor a long-term collaborative strategic plan for the SITECH Division to grow and satisfy the needs of all stakeholder groups, • Create and manage SITECH’s core operational processes in Sales, Product Support, and Services delivery, • Hire, train, develop, evaluate and manage the human resources of SITECH to consistently exceed productivity targets, demonstrate teamwork, and deliver Legendary Customer Service, • Evaluate, Allocate and Control the capital resources (e.g. facilities, product inventories) of SITECH in order to optimize Return On Net assets Employed, • Analyze and control expenditures to meet short and long term company objectives in conformance with budgetary requirements, • Work safely always and adhere to all applicable safety policies; complying with all company policies, procedures, and standards, • Performs other duties as required Knowledge, Skills, and Abilities: • Strong technical aptitude and application knowledge of technology equipment and their operation. This includes construction survey theory and technics as well as machine guidance systems, Understand the use of grade control technology across all platforms to include earthwork equipment, paving equipment, drilling and piling equipment, as well as off machine infrastructure and its application in the construction industry. Working knowledge of construction estimating and modeling techniques and processes., • Understanding of contractor operations and how survey, machine guidance, and jobsite technologies are used in their business., • Demonstrated knowledge of dealership operations including Sales, Product Support, and Services delivery., • Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, and coordination of people and resources, • Critical thinking skills to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems, • Excellent oral and written communication skills and ability to present formally after both small and large groups, • Excellent interpersonal and customer service skills, • Strong data analytical skills, • Excellent self-management, multi-tasking, and organizational skills, • Ability to work with all levels of personnel within the organization and customer operations, • Ability to read, analyze, and interpret construction site plans, professional journals, technical procedures, technical manuals, software specifications hardware principals of operations, and systems software operations, • Ability to understand the implications of new information for both current and future problem-solving and decision-making, • Knowledge and experience with economic and accounting principles and practices, including invoicing, credit management, the financial markets, banking and the analysis and reporting of financial data, • Ability to perform mathematical computations such as percentages, fractions, addition, subtraction, multiplication, and division quickly and accurately, • Ability to work independently and effectively within a team in a fast-paced, high-volume environment with emphasis on accuracy, timeliness, and achievement of goals., • Strong listening and questioning skills to effectively understand verbal and non-verbal communication. Ability to listen to and understand information and ideas presented through spoken words and sentences as well as the unsaid messages of others., • Advanced computer skills to include Excel, Word, PowerPoint, Sales Force, and Microsoft Dynamics Education and Experience: • Bachelor’s degree in Business Management, Civil Engineering, Construction Management, or related field preferred Responsibilities include, but are not limited to interviewing, hiring, and training employees; planning, assigning, and directing work; coaching and development; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems Travel: • Routinely out of the office, with overnight of 20%, • Working conditions are primarily indoors in a professional office environment, • Also works outdoors with possible exposure to temperature variations, damp/wet surfaces, hazardous materials, flammable liquids, high noise areas, dust, and unfavorable fumes and vapors, • To perform this job successfully, an individual must be able to perform each job duty and responsibility satisfactorily; Reasonable accommodations may be made to enable individuals with disabilities to perform job duties and responsibilities, • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-SIT

Job Description Overview JST is currently seeking a Procurement Analyst (Quality Management Office) (HCA function) to join our team. This is a full-time Onsite position with potential hybrid/remote work at Defense Health Agency (DHA) , offices in San Antonio, Texas. JST offers a full benefit package, a collaborative work environment and strong company culture. Veterans and military spouses are encouraged to apply. This position is contingent upon contract award. The Procurement Analyst (Quality Management Office) (HCA function) shall be professional in demeanor, appearance, and deportment. Employees shall be responsive. They may be required to interface with senior Government and industry officials. Personnel shall have excellent written and oral communications skills sufficient to provide clear concise communication and documentation. Proficient in the use of the Microsoft suite of applications including Word, Excel, PowerPoint, Outlook, and Project as well as with Adobe Acrobat. Procurement Analyst Responsibilities • Exceptional knowledge or understanding in direct Federal procurement in a GS-1102 (or similar) capacity with extensive knowledge or understanding of direct Department of Defense (DoD) procurement policy and acquisition management to include regulations, laws, policies, directives., • Use the methods and techniques of fact-finding, analysis, and resolution of complex problems, and the ability to develop concrete action plans to solve problems, • Demonstrated ability to provide expert technical advice, staff coordination and consultation to assist in formulating guidelines, implementing new developments, and providing expert interpretation., • Demonstrated excellent oral and written communication skills sufficient to compose and deliver responses to customers' complex questions in a clear and concise manner., • Ability to communicate procedures and processes to management, co-workers, customers, and stakeholders and provide guidance on pertinent changes to business functions and operations, • Ability to plan and organize to systematically coordinate, track, and complete workflow in accordance with the unique procedures and guidelines of multiple organizational entities., • Ability to prepare, track, monitor and analyze various data and information and write a clear, concise report., • Ability to run reports, analyze, and collect data for quarterly, monthly, and annual reviews., • Additional responsibilities may be assigned. Procurement Analyst Qualifications • A bachelor's degree with a major in any of the following fields: accounting, business, finance, law, contracts, purchasing, economics, industrial management, marketing, quantitative methods, or organization., • Experience with direct Federal procurement in a GS-1102 (or similar) capacity with extensive knowledge or understanding of direct Department of Defense (DoD) procurement policy and acquisition management to include regulations, laws, policies, directives., • Experience running reports, analyzing, and collect data for quarterly, monthly, and annual reviews., • Experience with all phases of procurement process Required Clearances and Screenings • MUST be able to pass a US Government Security Clearance About Joint Strategic Technologies (JST) No objective is beyond reach! Joint Strategic Technologies (JST) enables successful mission outcomes from the back office to the battlefield. Our team includes leading experts from military, government and the private sector, all working together to help federal customers make a difference. Our goal is to Elevate the Impact that our employees have on our customers and treat every employee as a valued member of our team. JST empowers employees to make decisions and take-action, thus improving overall organizational growth and employee development. Culture isn't something you talk about. It's something you do. JST is committed to creating a positive environment 'that reaches beyond work and careers' to support every employee's professional and personal objectives. JST values the well-being of every employee and encourages healthy lifestyles, family activities and community involvement. JST is a proud equal opportunity employer. All qualified applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. JST will not tolerate discrimination or harassment. Job Posted by ApplicantPro

Job DescriptionCompany Description At Konecranes, we believe that great customer experience is built on the people behind the Konecranes name. Everything we do, we do with passion and drive. We believe diversity drives business success and is the foundation for our growth. We welcome different backgrounds and skills that enrich our community, and we promote a place where we can ALL be ourselves. This is what makes Konecranes a unique place to work. Job Description JOB POSITION: Industrial Technician Are you interested in becoming an experienced Overhead Crane Service Technician? Join Konecranes, one of the world’s largest material handling companies. We're seeking skilled individuals with electrical and mechanical expertise, comfortable working at extreme heights. Our service technicians, the heart of our industry, thrive in a safety-first environment. You'll troubleshoot 480 3-phase motors, address crane issues, and collaborate with clients and facility directors to meet service needs across the United States. Principal Responsibilities: • Conduct inspections, maintenance, and repairs on electric overhead traveling cranes and hoists at customer locations., • Provide on-call service as part of a rotation, including after-hours support., • Troubleshoot electrical, mechanical, structural, and electronic issues on-site., • Perform post-repair audits to ensure safety features are functional., • Document findings and recommend corrective actions, including safety notifications to customers., • Consult with customers on repair and safety issues, offering recommendations for material handling improvement., • Produce electronic documentation using company tools, obtaining customer signatures., • Stay updated on industry codes and regulations (OSHA, ANSI, CMAA, HMI)., • Complete service reports and other required documents accurately and promptly., • Communicate with the Field Operations Manager and Service Coordinator following established practices, • Maintain company-issued equipment, vehicles, and assets in proper working order., • Operate tools, equipment, and vehicles, reporting deficiencies to the supervisor., • Follow established safety rules and procedures, including customer guidelines., • Participate in monthly safety meetings., • Perform other responsibilities as assigned by the supervisor. Qualifications Education: High School Diploma required. Associate degree in Industrial Electrical and/or Mechanical Technology or related field preferred or equivalent vocational/technical training and experience. Experience: Minimum one (1) year experience involving electrical troubleshooting and mechanical repair. Some electronic experience but not necessary. Prior experience with cranes is a benefit, but not required. Other Requirements: Must have and maintain a good driving record, including a valid driver's license. Must be willing to work off the ground. Can work varied overtime, as needed by customer, be available for "on call" as part of the service office rotation and be able to travel and work out of town, on occasion. Must be able to frequently lift to 25 lbs. Must be able to lift up to 50 lbs. on a daily basis. Must be able to lift to 75 lbs. although not on a daily basis. Must be able to lift 100 lbs. on a rare basis. This position requires frequent climbing, balancing, stooping/crouching, and overhead reaching. This position requires occasional pushing, pulling, kneeling, and crawling. This position will be inside approximately 90% of the time and outside approximately 10% of the time. This position will be frequently exposed to heat, cold, noise and heights. • This is a safety sensitive position., • *KCN Additional Information What we offer: Salary: $22 - $48 an hour - Pay is determined based on skills, geographic location, internal equity, market/data analysis, number of years of prior relevant experience, degrees and/or certifications, technical assessment score, etc. Company Vehicle: Our Service Technicians get a work truck and a gas card to be used for business purposes. Candidates must pass a Motor Vehicle Record (MVR) check. Benefits: Medical Plan, Dental, Vision, 401k plan with a match from day one, identity theft protection, accident insurance, travel insurance and so much more! Vacation: 2 weeks of vacation per year (pro-rated for the first year depending on start date). 5-12 years of service, 3 weeks. 13+ years of service, 4 weeks. Sick Leave: 5 days of Sick Leave per year. Pro-rated the first year after 90 days of service Konecranes moves what matters. Konecranes is a global leader in material handling solutions, serving a broad range of customers across multiple industries. We consistently set the industry benchmark, from everyday improvements to the breakthroughs at moments that matter most, because we know we can always find a safer, more productive and sustainable way. That's why, with 16 000+ professionals in over 50 countries, we are trusted every day to lift, handle and move what the world needs. Konecranes is committed to ensuring that all employees and job applicants are treated fairly in an environment which is free from any form of discrimination. We are an Equal Opportunity Employer - Minorities/Women/Protected Veterans/Disabled/Other Protected Category. Konecranes, Inc. and its affiliates will not accept resumes from external recruiters or agencies without a Service Agreement and Agency Portal submission. Any resumes sent without a Service Agreement and Agency Portal submission with Konecranes, Inc. are void of any fees and free for internal use. Applicable Konecranes data protection obligations are the responsibility of the agency.

Job DescriptionJob description: Position Summary: The Sales Engineer is responsible for driving growth in the Company's share of United States government, major OEM and international customer contracts within aerospace and logistics sectors. The position requires a strong understanding of USG and international operations, effective interaction with governments' representatives, and the ability to translate customer needs into successful solutions while assisting in the product management of the company's Material Handling and Ground Support Equipment products. A critical component of this role is the ability to leverage or integrate Air Transportation Subject Matter Expertise to ensure solutions are operationally relevant and technically sound, especially concerning cargo aircraft systems and logistics support. The position drives positive results relative to product management to include effective market research and analysis, roadmap development, testing/certifications, new product introduction processes. The Company's products primarily consist of systems used for the transportation of personnel and equipment in cargo aircraft, directly supporting commercial and military mission objectives. Duties and Responsibilities: 1. Business Growth: Identify and pursue direct and indirect business opportunities through governments' channels and strategic partnerships with major OEMs (e.g., Lockheed Martin, Boeing, Standard Aero, Airbus)., 2. Product Management. Plan, build, and implement product management processes for existing and new products to include market research, common configuration, customer/prospect engagement, product development, and a clear new product introduction process (NPI)., 3. Proposal Management: Lead the development and submission of competitive proposals, ensuring clear articulation of solutions and compliance with relevant military specifications (MIL-SPECs). Incorporate Air Transportation SME input to validate operational feasibility and technical accuracy of proposed solutions., 4. CRM Management: Maintain accurate business development and sales data within the Company's CRM system., 5. Market Research: Conduct thorough market research and analysis of DoD logistics and aerospace requirements to support Marketing Campaigns, proposals and contract development. Assist outside marketing consultants in developing product messaging that differentiates the company's products and services from others in the market., 6. Communicate effectively (internally and externally) the value of our products and services to the market. Utilize Air Transportation SME insights to identify key trends and emerging needs within the cargo aircraft and logistics domain., 7. Contract Strategy: Develop and execute contract strategies, including pricing discussions, timeline management, and deliverable definition. Leverage Air Transportation SME knowledge to ensure contract terms align with operational realities and technical requirements., 8. Contract Drafting & Compliance: Draft and review contractual provisions, ensuring compliance with FAR and DFARS regulations., 9. Contract Negotiation: Serve as a subject matter expert during contract negotiations, advocating for the Company's interests while meeting client needs. Utilize Air Transportation SME expertise to address technical and operational questions during negotiations., 10. Relationship Management: Maintain effective communication with business partners and government clients, ensuring timely information exchange and issue resolution., 11. Opportunity Quoting: Prepare quotes for smaller opportunities and related equipment., 12. Marketing Support: Contribute to website and social media updates, highlighting the Company's capabilities and achievements. Use market research and critical data analysis to determine effective product pricing. Ensure marketing materials accurately represent the Company's expertise in air transportation solutions, potentially with SME contribution., 13. Conference Coordination: Coordinate travel and logistics for industry conferences and events. Facilitate SME participation in relevant conferences and events to enhance the Company's technical credibility., 14. Measure and optimize the buyer journey as it relates to product feature adoption and usage., 15. Assist the CRO in managing the marketing budget and outside consultant approval processes. Requirements General Expectations: 1. Works collaboratively with other managers of the company to promote good teamwork and a work environment which is productive and positive to execute the company's goals., 2. Meticulous and precise diligence in all aspects of product planning and execution., 3. Ability to create, communicate, and execute effective product plans., 4. Excellent verbal and written communication skills. Strong presentation presence., 5. A high degree of initiative and intelligence to gather and analyze data to generate results., 6. Demonstrates ability to adapt to dynamic markets to include US and international government engagements with an appreciation of the contract and procurement process. Qualifications: 1. Bachelor's degree in Engineering or related program., 2. 10 years+ military, aerospace, aviation experience., 3. Computer skills using Microsoft Office Suite and CRM platforms., 4. Aerospace, aeromedical, emergency management, or biomedical experience a plus., 5. Firsthand or general knowledge of cargo handling vehicles, ground support equipment, cargo aircraft and operations in the cargo aircraft, 6. Experience dealing with third party sales resources, especially international sales agents. Skills: 1. Knowledge of federal government contracting requirements and processes., 2. Familiarity with legal/licensing concepts such as Intellectual Property, Limitations of Liability, Indemnification, Warranties, etc., 3. Demonstrates negotiation skills and superior organizational skills., 4. Proven analytical and written and verbal communication skills., 5. Ability to be proactive, prioritize and maintain deadlines in a service-oriented and sales driven environment., 6. Speed and accuracy are essential requirements for this position., 7. Works well in a “team” environment., 8. Able to obtain DoD clearance. Work Environment Requirements: 1. Estimated international and domestic travel: 25%., 2. Office environment is typical for day-to-day operations.

Job Description Remote (Must Reside in Texas) Full-Time, Permanent Role with Benefits Confidential Energy & Utilities Client Position Overview Our VIP Client, an established energy company is seeking an Energy Data Analyst (Remote | Must reside in TX) to join its enterprise risk and analytics team. This hybrid role is designed for a highly experienced data professional who brings both technical excellence and deep fluency in the wholesale natural gas market — someone who can draw meaning from complex datasets, identify value-creation opportunities, and influence strategic decisions with minimal ramp-up. This is not a foundational role, and onboarding will not include “Natural Gas 101.” Instead, you’ll be expected to arrive with a command of market structure, storage dynamics, tariff implications, and how commercial decisions intersect with operational data. You’ll work with imperfect, third-party data feeds (from pipelines, storage operators, market indices) and transform them into usable, strategic insight. Key Responsibilities * Own the development of models, reports, and scripts that support risk assessment, price and volumetric exposure, and storage valuation. * Clean and normalize raw data feeds from external vendors, ensuring high-integrity inputs for downstream forecasting, valuation, and optimization tools. * Apply contextual knowledge of market dynamics, including pipeline behavior, tariffs, and trading incentives, to evaluate commercial opportunities. * Build predictive analytics frameworks for weather, load, and pricing volatility. * Support arbitrage strategy development and operational decision-making through analytical rigor. * Deliver intuitive dashboards and visualizations that provide decision-makers with actionable insights. * Mentor junior analysts and act as a subject-matter expert across data infrastructure, modeling strategy, and gas market economics. What You Bring * A strong commercial and technical command of the natural gas value chain — particularly in wholesale, trading, or risk-oriented settings. * The ability to work independently, ask the right questions, and proactively identify what data is missing, misaligned, or misleading. * Comfort working with incomplete, messy, or vendor-aggregated datasets — and the judgment to reconcile them using experience and intuition. * Exceptional communication skills, with a track record of explaining complex analytical outcomes to stakeholders across the business. * Proven ability to prioritize what's material from a business perspective, not just what’s statistically interesting. Preferred Qualifications * Education: Bachelor’s in Data Science, Engineering, Finance, Economics, or a related field. Certifications like CAP, SDS, or MCSE in Data Management are advantageous. * Tools & Languages: Proficient in Python, SQL, DAX, PowerQuery, Excel; experience with Git/version control. Familiarity with Java or VB is a plus. * Data Engineering: Skilled in ETL pipeline design, database development (Azure, Oracle, MySQL), and advanced data cleaning and validation. * Energy Market Expertise: Must understand tariff structures, storage optimization, pipeline scheduling, and how these intersect with market drivers. * External Data Sources: Experience working with third-party vendors (e.g., S&P Global, ICE, CME, EIA, FERC, EBBs), and able to turn raw feeds into business-ready inputs. * Visualization & Reporting: Strong background in business intelligence tools and building visual narratives that tie data to decisions. Why This Role? You’ll be stepping into a high-visibility role that influences pricing, risk, and trading decisions across a major energy business. This is a seat at the strategy table, not just behind a dashboard. The team values speed, precision, and commercial fluency, and you’ll be working with leaders who expect — and empower — analysts to act as trusted advisors. This role offers full benefits, strong compensation, and the opportunity to make measurable impact every day. Equal Opportunity & Accessibility This employer values diversity and is committed to building an inclusive and supportive work environment. Accommodations are available throughout the hiring process upon request.

Job Description This position is responsible for, but not limited to the sale of all compact construction equipment (CCE), mid ag, and hay equipment distributed by Tellus. Responsible for developing partnerships with current and potential clients to grow Tellus Equipment Solutions’ market share. SUMMARY OF RESPONSIBILITIES Works with customers and potential customers to provide solutions to their equipment needs. Promotes JD equipment products to customers in their assigned territory. Interacts with existing and prospective customers to demonstrate products and explain features. Responsible for all sales activities from lead generation through closing the sale. Monitors market conditions, competitor’s products and pricing. Provides on-site expertise for demonstrations, machine inspections and technical support Executes an effective whole goods marketing strategy (Government related Direct mail, website content and events) Coordinate with all internal departments to ensure complete customer satisfaction KEY QUALIFICATIONS & COMPETENCIES 3+ years equipment sales experience Experience with John Deere and competitive products preferred Experience with software applications such as Microsoft Office Experience with utilizing John Deere systems preferred. Ability to present and negotiate exceptionally well Basic knowledge of equipment financing and accounting. Versatile and enthusiastic with high energy and exceptionally self-motivated to succeed Ability to travel territory assigned using company truck and trailer where necessary EDUCATION & CERTIFICATIONS High School Diploma or equivalent work experience Valid Driver's License with a clean driving record WORKING CONDITIONS The work environment/physical demand characteristics described here are representative of those the employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Job Description About Legent Health At Legent Health, our mission is simple yet profound: “To provide first-class health care that puts YOU first.” Our vision reflects our commitment to excellence: “Through robust physician partnerships, become a nationwide leader in compassionate, quality healthcare focused on the patient and available to everyone.” Our values, also known as our brand pillars, define how we stay true to our identity in the healthcare industry and the communities we serve. These values are central to everything we do: • Respect: We honor the time and trust of both patients and physicians by delivering organized, efficient services that ensure a seamless healthcare experience., • Service: We are committed to highly personalized care for patients, their families, and the physicians who serve them, driving optimal outcomes for all. About the Role The Certified Surgical Technologists is an allied health professional, who is an integral part of the team of medical practitioners providing surgical care to patients. The Certified Surgical Technologists work under the supervision of a surgeon to facilitate the safe and effective conduct of invasive surgical procedures, ensuring that the operating room environment is safe, that equipment functions properly, and that the operative procedure is conducted under conditions that maximize patient safety. The Certified Surgical Technologist shall possess expertise in the theory and application of sterile and aseptic technique and combine the knowledge of human anatomy, surgical procedures, and implementation tools and technologies to facilitate a physician's performance of invasive therapeutic and diagnostic procedures. POSITION’S ESSENTIAL RESPONSIBILITIES: • The Certified Surgical Technologist handles the instruments, supplies, and equipment necessary during the surgical procedure., • Understands the procedure being performed and anticipates the needs of the surgeon., • Decontaminates and sterilizes instruments, medical supplies, and equipment, and assembles, wraps, and sterilizes trays of instruments., • Follows proper Standard Precautions while in decontamination and sterilization areas., • Monitors biological and chemical wash solution to ensure quality and consistency for decontamination of instruments and medical equipment., • Sort mismatched sets of instruments, trays, and medical equipment and makes them available to sterile processing customers in a timely manner., • Restocks, labels, and maintains inventory, submits requisitions, collects, and distributes instruments, trays, crash carts, and facility medical equipment., • Performs environmental maintenance duties and assists in maintaining inventory levels in sterile processing, the operating room, and in equipment storage areas., • Verifies that equipment functions properly, requisitions for equipment maintenance, repair, or replacement, and removes defective equipment., • Maintains a clean work area., • Checks supplies and equipment needed for surgical procedure., • Sets up sterile table with instruments, supplies, equipment, and medications/solutions needed for procedure., • Performs appropriate counts with circulator prior to the operation and before incision is closed., • Helps in draping sterile field., • Passes instruments, etc., to surgeon during procedure., • Maintains highest standard of sterile technique during procedure., • Prepares sterile dressings., • Cleans and prepares instruments for terminal sterilization., • Assists other members of team with terminal cleaning of room., • Assists in prepping room for the next patient., • Able to answer both clinical and technical questions about the da Vinci surgical system, • Tasked with plan for sustainable growth of the robotics program, • Serves as main point of contact, • Enables surgeon access and facilitates best in class case support experience, • Targets and supports new surgeons interested in surgical procedures using the da Vinci system, • Coordinates and attends regularly scheduled robotic Steering Committees and provides operations updates on the progression of the program, • Works to configure the operation room ® in a way that is efficient for the use of a da Vinci surgical system, • Works with materials management to order da Vinci surgical instruments and accessories as needed, • Maintains lean par levels of all da Vinci surgical instruments and accessories that should be in stock, • Creates a metric tracking system for robotic cases to set benchmarks and evaluates progress towards the goals in reduction of non-operative time and more efficient OR workflow, • Based off usage metrics based on instrument utilization data, determines where it makes sense to create trays and where instruments should be peeled back, • Works with surgeons and nursing staff to lean out preference cards and determine which standing orders are needed for all robotic assisted procedures, • Works with the OR manager or charge nurse to ensure operating rooms, designated for robotic-assisted surgical cases, are properly staffed, • Works with the nursing staff to ensure robotic rooms have all ancillary supplies needed for robotic surgeries performed with a da Vinci surgical system, • Establishes a training pathway for all new hires or those that will be working in the OR designated for robotic-assisted surgical procedures, including assigning online modules, providing an in-service on the da Vinci surgical system, and observing cases, • Establishes clinical competencies for all staff involved in robotic-assisted surgical procedures and explains guidelines for annual testing to ensure those competencies are met, • Educates the OR staff on updates or new products used within robotic-assisted surgical procedures, • Troubleshoots any issues with the da Vinci surgical system during surgical procedures, • Initiates RMA process for damaged instruments and scopes, • Assists as scrub nurse or First Assist at patient side during robotic-assisted surgical procedures if applicable, • Responsible for maintaining, updating, and collecting the daily wrap-up sheet, • 3 Years’ experience as a Surgical Technologist Preferred, or equivalent Military training., • Two (2) years of experience as a surgical technologist and/or has demonstrated competency in two (2) or more specialty areas., • Demonstrates knowledge and practice of perioperative patient care concepts. Legent Health fosters an environment where team members are empowered to deliver exceptional care while growing professionally within a supportive, values-driven culture. We Offer: • Competitive salary and performance incentives, • Comprehensive benefits package, • Paid time off and wellness programs Legent Health is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, disability status, or any other legally protected characteristic. I-9 and E-Verify Compliance: Employment eligibility will be verified through the U.S. Department of Homeland Security’s E-Verify system. All applicants must provide valid documentation to establish identity and authorization to work in the United States, as required by federal law.

Job Description EControls is a global provider of innovative, state-of-the-art integrated controls solutions for internal combustion engines and electric drive systems in the off-highway, on-highway, and stationary equipment markets. EControls designs world-class, full-authority engine management systems for major OEMs around the world. Our global engine development labs and engineering staff offer full-range support, from design guidance for base engine conversion to hardware, software, and engine calibration to meet each application's specific requirements. We are passionate about customer satisfaction and service. We fearlessly engage in any effort that will eliminate our customers’ risk and clear a path to their success. We immerse ourselves in our customers’ world, reveal unknowns and deliver integrated solutions. We have a global footprint ready to serve customers with high-level product support and deep application engineering. The company employs over 900 employees worldwide dedicated to serving our customers and markets on virtually every continent. We have locations in Texas, and Oklahoma, as well as multiple overseas operations in Europe, and Asia. Responsibilities Responsible for being the Technical Lead for new product development of mechanical and electro-mechanical products, which includes driving and supporting the team through our phase gate product development process. Lead design analysis (FEA, CFD), design reviews, DFMEAs, PFMEAs, and DFM reviews. Act as product expert, working closely with internal cross functional team (supply chain, manufacturing engineering, sales, and quality) to develop new and support existing products. Interact externally with both customers and suppliers on technical topics. Work closely with Program Manager to estimate product cost and development timeline. Develop and write design validation test specifications, working closely with the test lab to make sure products are properly validated. Mentor and train junior engineers and drafters to assist in developing a strong, consistent engineering organization. Education & Experience • Minimum of five (5) years of relevant experience, • Bachelor’s degree in Mechanical Engineering or related field, • Proficient in 3D mechanical design (SolidWorks preferred), • Proficient in one or more analysis tools (FEA, CFD, Tolerance stack), • Excellent oral and written communication skills, • Attention to detail, • Understand and apply GD&T standards, • Ability to work in a fast-paced and challenging environment, • Injection molding/die casting processes and design practices, • Seal design EControls and FW Murphy Production Controls provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, EControls and FW Murphy Production Controls comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training. Powered by JazzHR sZUayp352q

Job DescriptionSalary: Purpose The Project Engineer will support existing and new products with project management and development. This will include product management, prototyping, testing, and marketing associated with products. Responsibilities • Manage and execute product development projects from ideation to market launch, • Lead project management activities on assigned projects including schedule, budget, work products and deliverables, • Execute projects following design control practices and developing the necessary project inputs and outputs required for each development phase, • Organize appropriate methods of communication between project stakeholders, • Collect, organize, and communicate customer and market feedback to identify critical product characteristics, • Develop scalable and repeatable manufacturing processes for new products in collaboration with the Quality Assurance (QA) and Operations departments, • Author and revise standard operating procedures (SOP) according to FDA, AATB, and other regulations if applicable, • Review, analyze, and characterize critical financial characteristics of products including COGS, • Conduct group trainings for new processes and complete technology transfer of new products, • Perform processing of human tissue as part of the development of new processes, • Design and execute scientific experiments for product development projects. Complete data collection, evaluation, and interpretation of results to generate statistically significant data to support project decisions and/or product launch, • Specify, order, evaluate, and onboard new proprietary equipment in support of products, • Execute and plan new company initiatives including equipment onboarding, supply chain management, distribution capability, and product support, • Design and develop custom manufacturing equipment if applicable, • Support and expand existing product lines by responding to business development needs, collecting, and organizing product feedback, and improving and supporting products, • Support the development and implementation of sales material for products and work with Quality Assurance to ensure all claims are appropriate for market and regulatory position, • Conduct literature reviews to support new and existing products, • Assist with investigation of product quality events and appropriate preventative/corrective actions, • Support regulatory and reimbursement submissions for products, • Develop and execute validation protocols in accordance with regulatory requirements. Review validation data and draft validation reports, • Identify and develop a working knowledge of ASTM, AAMI, ISO, and other necessary validation or testing guidance's required for assigned product development projects, • Maintain a working knowledge of FDA 21 CFR 1271, FDA 21 CFR 820, AATB standards, ISO Standards, cGMP/CGTP, other relevant regulations/standards, and internal organizational policies and standard operating procedures, • Travel domestically up to 5% to attend offsite meetings, conferences, and support business initiatives, • Maintain acceptable attendance and punctuality for scheduled work hours and meetings, • Ensure completion of assigned tasks and responsibilities within defined timeframes, • Flexibility to work outside of normal business hours during weekdays or weekends with reasonable advance notice, to support business/operational needs when necessary, • Perform other duties as assigned Skills • Project Management experience, • Ability to present complex ideas, • Technical writing ability, • Knowledge of manufacturing environment and validation procedures, • Strong analytical and creative thinking skills, • Ability to work in a fast-paced environment, • Ability to work independently and in a team environment, • Proficient in Microsoft Office, • Experience working with vendors and suppliers Qualifications/Requirements • Bachelor's degree in biomedical or mechanical engineering or related field required, • 3 years of experience in project management required, • Experience with Mechanical Design preferred, • Experience with CAD Software preferred, • Education in Engineering, or Biological Science or related field preferred, • Product Development and exposure to medical products preferred, • Experience with allografts and/or medical devices preferred, • Clearance of favorable background investigation required

Job Description The Senior Geotechnical Engineer will take on a variety of responsibilities including proposal preparation, technical review of reports, field oversight, and client interaction. This is an ideal role for someone with a strong technical foundation who also enjoys mentoring, developing solutions to complex geotechnical challenges, and managing high-value projects from start to finish. Key Responsibilities Technical Work • Conduct and oversee geotechnical evaluations, field explorations, and sample collections, • Perform advanced engineering analyses and calculations, including PVR calculations, • Apply expertise in subsurface design, deep foundation systems, slope stability, and ground improvement methods, • Utilize engineering software tools such as Geostudio, SLIDE, and VOLFLOW for project analysis, • Supervise and mentor engineers, technicians, and support staff, • Promote a collaborative and safety-focused work environment, • Maintain strong client relationships through responsive communication and high-quality deliverables Requirements • Bachelor’s degree in Geotechnical Engineering, Civil Engineering, or related field, • Professional Engineer (PE) License in Texas (required), • Minimum 8 years of experience in geotechnical engineering, preferably with projects in Texas, • Strong background in deep foundation and ground improvement systems, • Excellent communication, technical writing, and organizational skills, • 401(k) (Matching Program), • Health insurance, • Dental insurance (Free to Employees), • Vision insurance (Free to Employees), • Disability insurance (Free to Employees), • Life insurance (Basic Term Life Free to Employees), • Paid Time Off (PTO), • Professional Development Assistance, • Employee Referral Bonus, • Tuition Reimbursement

Job Description Our client is looking for an experienced Civil Engineer and Project Manager with 10+ years of experience in planning, design, and project management on water and wastewater and municipal infrastructure projects, focusing on utility design and municipal water/wastewater projects. Recent and ongoing projects include water and wastewater pipelines, lift stations, water modeling, City Engineering services including development plan and plat reviews, capital planning, drainage analysis, roadway, and storm drainage design. Primary responsibilities for this position include: • Working with junior staff and assisting in the direction of other technical staff to produce quality designs and plans, • Performing civil engineering planning and analysis, detailing, and plan set production Requirements: • Bachelor's Degree in Civil Engineering, • Texas PE license or the ability to obtain a Texas PE license within 6 months of hire, • 10-15 years of experience in municipal infrastructure including water and wastewater, roadway and drainage project planning, detailed design, and construction administration, • 3 or more years of experience in project management and client service, including successful budget and schedule controls, • 3 or more years of experience in managing and mentoring junior staff, • Experience in MicroStation and/or AutoCAD, • Ability to work independently at times and as part of a multidisciplinary team at others, • The ideal candidate would possess specific experience performing work in small and medium-size towns or Municipal Utility Districts with experience giving Council/Board presentations., • Experience with writing Statements of Qualifications and sales activitiesthe offer: They provide opportunities in the fields of transportation, water, wastewater, transportation, stormwater, and planning., • Opportunity to succeed in your career, • A competitive salary, • A broad benefits package including medical, prescription, dental, vision, company-paid life insurance, and long-term and short-term disability insurance, • 401(k) retirement plan with employer match

Job Description Description: KMEA is a project management, environmental, energy, engineering, and sustainability consulting company providing professional engineering, scientific, and technical services to our clients throughout the United States and internationally. With technical centers throughout the country KMEA's award-winning services include Major Program Management, Environmental Remediation, Environmental Engineering & Consulting Services, Energy, Engineering (A/E), Sustainability, Staff Augmentation, and Third-party Inspection Services. Our firm is committed to delivering innovative and sustainable solutions in support of mission-critical programs for the Department of Defense (DoD) and other federal agencies. We are currently seeking a Civil Engineer to join our San Antonio office. The ideal candidate will bring a collaborative mindset and a strong technical foundation, with the ability to contribute across a broad range of civil engineering disciplines. This is a great opportunity for a mid-level civil engineer looking to grow their career through exposure to a wide variety of project types in both the public and private sectors, including work with federal and DoD clients. This hybrid position is based in San Antonio, Texas with an expectation of working in the office two days per week. Travel is anticipated approximately 10 percent of the time. Main Responsibilities: • Perform initial and ongoing civil engineering design for multidisciplinary projects., • Conduct technical reviews and prepare documentation with critical analysis and solutions to resolve design or field issues., • Develop and contribute to field reports, internal correspondence, and sections of formal project reports, under the guidance of senior engineers or project managers., • Support proposal development and project scoping by working with vendors, preparing scopes of work, collecting bids, and coordinating with subcontract administrators., • Mentor and provide technical guidance to junior engineering staff., • Conduct engineering calculations and collaborate with project managers to develop accurate estimates of labor hours and costs., • Support compliance with project safety plans, adhering to company and site-specific safety standards. Required Qualifications: • Bachelor's degree in Civil Engineering, • Engineer-in-Training (EIT) certification is required; eligibility to sit for the Professional Engineer (PE) exam is preferred., • Proficiency in AutoCAD, • Strong communication skills, both written and verbal, with the ability to clearly convey technical information., • Experience working with federal or DoD contracts and understanding of related standards and expectations., • Organized, detail-oriented, and self-motivated team player with the ability to manage multiple priorities., • Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint).Willingness and ability to travel periodically as required by project needs., • Must be eligible to work legally in the US. Preferred Qualifications: • Experience preparing and writing technical studies and formal reports., • Proficiency in pavement and/or traffic design is highly desirable., • Experience developing cost estimates using RS Means or similar estimating tools., • Knowledge of stormwater design, environmental impacts, and permitting processes., • Familiarity with civil site work in federal, military, or government contexts is a plus. Company Summary TOP REASONS TO WORK WITH US: • Safety: The goal of the KMEA safety team is zero incidents. In support of this goal, at KMEA safety takes precedence over expediency., • People: We value everyone's role and collaborate to produce the best results., • Integrity and Ethics: We say what we mean and do what we say., • Outstanding Customer Satisfaction: Outstanding customer satisfaction was what established our reputation and secures our future., • Innovation: We embrace change as an opportunity, we are a culture that values innovation, sustainability, and professional growth., • Profitability Controlled: Sustainable profitable growth allows us to provide financial security for our employees and their families and to give back to the community. ABOUT THE ORGANIZATION: KMEA is a project management, environmental, energy, engineering, and sustainability consulting company providing professional engineering, scientific, and technical services to our clients throughout the United States and internationally. With technical centers throughout the country KMEA's award-winning services include Major Program Management, Environmental Remediation, Environmental Engineering & Consulting Services, Energy, Engineering (A/E), Sustainability, Staff Augmentation, and Third-party Inspection Services. The goal of KMEA is simple - to provide superior client services and advocacy to cost-effectively manage our clients' environmental, energy, engineering, and sustainability issues. Since its founding in 1996, KMEA's outstanding performance is testimony to our commitment and dedication to our customers. KMEA offers a full range of benefits, including 99% employer-paid medical plan for employees; dental and vision plans; flexible spending account (FSA) for pre-tax medical, dental and vision products and services and dependent care; a generous Paid Time Off (PTO) plan; Company-paid group life insurance; supplemental voluntary term life (VTL) policy with a guaranteed issue benefit; and 401(k) plan with a generous Company match and vesting plan. KMEA is a federal contractor, and qualified Military Veterans, and other Qualified Protected Class candidates are encouraged to apply. Equal Employment Opportunity Statement KMEA is proud to be an Equal Opportunity Employer and is committed to building a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, national origin, ancestry, ethnicity, religion or religious creed (including religious dress and grooming practices), sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender, gender identity, gender expression, sex stereotypes, or transgender status (including transitioning, having transitioned, or perceived identity). We also prohibit discrimination based on age (40 and over), disability (physical, mental, or perceived), medical condition, genetic information or characteristics, marital status, registered domestic partnership, military or veteran status, citizenship status, or any other characteristic protected by applicable federal, state, or local law. In alignment with evolving anti-discrimination standards, KMEA explicitly prohibits discrimination based on protective hairstyles, including but not limited to Afros, braids, twists, cornrows, and locs. We are committed to providing reasonable accommodations to qualified individuals with disabilities and veterans in our hiring process and in employment. KMEA promotes equity at every level and encourages candidates from all backgrounds to apply. Reasonable Accommodation: KMEA will provide reasonable accommodations to applicants with disabilities. A request for a reasonable accommodation may be made at any time during the application or hiring process or while employed by KMEA. NOTICE TO THIRD PARTY AGENCIES: Please note that KMEA does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Recruitment Fee Agreement, KMEA will not consider or agree to payment of any referral compensation or recruiter fee. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement, KMEA explicitly reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Any unsolicited resumes, including those submitted to hiring managers, are deemed to be the property of KMEA. Must be able to pass pre-employment drug test, MVR check, and federal government background check.

Job Description We're seeking a Senior Process Engineer who's ready to be part of a company committed to formulating everyday success for every customer through innovative, reliable products used to adhere, seal, and protect at every level of the building envelope. ABOUT THE ROLE We are seeking an experienced and highly motivated Process Project Engineer to both manage capital improvement projects and provide direct technical support to our manufacturing operations. The ideal candidate is a hands-on engineer with a strong background in chemical process environments. In addition to managing the entire project lifecycle-from scope definition to commissioning-this role will be a key technical resource for the site, responsible for driving continuous improvement by analyzing workflows, identifying bottlenecks, and optimizing existing processes to enhance safety, quality, and efficiency. This position requires a unique blend of technical engineering acumen, project management discipline, and a practical, plant-floor perspective. We are hiring in Houston, TX, Rockland, MA, and Waukesha, WI. WHAT YOU'LL BE DOING Project Lifecycle Management: • Lead capital projects from initial concept and feasibility studies through design, procurement, installation, commissioning, and final documentation., • Develop detailed project scopes, schedules, and cost estimates ($)., • Manage multiple projects simultaneously, providing regular status updates to stakeholders. Process Optimization & Plant Support: • Analyze production data, workflows, and processes to identify bottlenecks, inefficiencies, and opportunities for improvement., • Develop and implement data-driven solutions to improve product quality, increase operational efficiency, and enhance process safety., • Lead and support continuous improvement initiatives and root cause analysis investigations for production and safety-related issues., • Provide daily technical support to Operations and Maintenance teams to troubleshoot process upsets and ensure stable, reliable production. Technical Design & Equipment Specification: • Read, interpret, and modify Piping & Instrumentation Diagrams (P&IDs)., • Perform engineering calculations to properly size and specify process equipment, including pumps, piping, vessels, valves, and instrumentation., • Research and identify the best available equipment and technology for specific applications., • Ensure all designs comply with internal standards and relevant industry codes (e.g., ASME, API). Procurement & Vendor Management: • Develop comprehensive Request for Quotation (RFQ) packages for equipment and services., • Perform technical and commercial bid analyses to select suppliers and contractors., • Visit supplier sites to conduct equipment trials and Factory Acceptance Tests (FATs)., • Perform Site Acceptance Tests (SATs) when equipment has arrived onsite. Construction & Contractor Management: • Vet, select, and manage on-site contractors for all installation and construction activities., • Lead safety orientations and ensure all on-site work is performed in strict adherence to company safety protocols (e.g., Lockout/Tagout, hot work permits)., • Ensure that all local, state, and federal rules and regulations are followed during construction (building permits, modification of PSM or RMP, etc.)., • Provide direct on-site supervision to ensure equipment is installed and erected according to engineering specifications and best practices., • Commission equipment and work directly with other functions such as operations, maintenance, and quality to ensure that equipment meets design standards., • Work in cross-functional teams to create Standard Operating Procedures (SOPs), follow Management of Change (MOC) protocol, and provide/create equipment documentation where necessary. Maintenance & Reliability Integration: • Apply a "Design for Maintainability" mindset to all projects, ensuring safe and efficient access for future maintenance and repairs., • Collaborate with the Maintenance and Reliability teams to identify critical spare parts, develop preventative maintenance plans, and ensure a smooth handover of project documentation. WHAT WE ARE LOOKING FOR Education: • Bachelor of Science in Chemical Engineering (Required), • Master of Science in Chemical Engineering (Preferred) Experience: • Minimum of 5-7 years of combined project and process engineering experience in a chemical manufacturing environment., • Proven track record of managing "cradle-to-grave" capital projects from $50K to $5M+., • Demonstrated experience in process optimization, troubleshooting, and continuous improvement in a manufacturing setting., • Direct, hands-on experience with the specification, installation, and startup of process equipment (pumps, piping, tanks, control systems)., • Demonstrated experience in managing and directing contractors and skilled trades., • Experience in a maintenance or reliability role is a strong plus., • Experience working in a PSM and RMP regulated environment. Skills & Abilities: • High proficiency in reading and creating P&IDs, Electrical Schematics, Construction Plans, and other technical drawings., • Strong analytical and problem-solving skills with a data-driven approach to decision- making., • Knowledge of continuous improvement methodologies (e.g., Lean, Six Sigma) and root cause analysis tools., • Strong understanding of process control fundamentals (DCS/PLC)., • Excellent communication skills, with the ability to effectively interact with plant operators, maintenance technicians, and senior management., • A robust safety mindset and knowledge of OSHA and industry safety standards., • Proficiency with MS Project or similar project scheduling software., • Experience with AutoCAD or other CAD software is desirable. WHAT WE OFFER • Competitive Compensation, • Retirement Savings, • Medical, Dental, Disability and Life Insurance Coverage, • Holistic Health & Well-Being Programs, • Health Savings Accounts (HSA) & Flexible Spending Accounts (FSA) for, • Health and Dependent Care, • Vision and other Voluntary Benefits and Discounts, • Paid Time Off and Holidays, • Paid Parental Leave (Maternity and Paternity), • Educational Assistance Program #BuildingEnvelope Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.]]>

Job Description POSITION SUMMARY: The Case Manager is responsible for contributing to TRDI's Mission “To Create and Enhance Life Opportunities for People with Barriers & Disabilities” and Core Values “Integrity, Innovation, Compassion, Communication, and Courage.” This position involves growth and success in TRDI’s Entrepreneurial Operating System “EOS” through the identification, pursuit, acquisition, and management of contracts that are consistent with TRDI's Business Plan. The BDM is responsible for creating strategies to ensure TRDI wins bids, establishes customer relationships (Federal, State, Local Governments, Universities, and Private sectors customers), and comprehends the complex procurement processes in various industries. PRIMARY DUTIES AND RESPONSIBILITIES: • Ensure overall compliance with the requirements of all mission driven programs and work, including but not limited to AbilityOne, WorkQuest, and commercial contracts., • Ensure overall compliance with laws, rules, regulations, and policy as prescribed by regulatory agencies., • Responsible for leading the organization’s required compliance initiatives with the AbilityOne and other regulatory employment programs., • Collaborates with healthcare providers, specialists, and community resources to ensure comprehensive care., • Act as a liaison between patients and healthcare systems to advocate for necessary services and support., • Accountable for the tracking and measurement of all regulatory program requirements and ensure timely and accurate status updates are provided to key management., • Responsible for data collection, interpretation, and analysis, and action plan synthesis in order to implement the necessary changes based on data and performance indicators., • Responsible for implementing, enforcing, and redirecting recruiting and retention strategies that will help achieve compliance with regulatory programs (i.e. AbilityOne, WorkQuest, Veteran Programs, EEO, Affirmative Action Plan, etc.) and ensure workforce needs are met for all contract job sites within budgets. Make effective use of various methods., • Manage and ensure a seamless transition for new hires (no less than 90 days) by coordinating site access, security clearances, required training, job expectations, employee benefits, shadowing opportunities, mentorship, transportation, care, medical documentation, and work schedule assignments., • Provide case management to new potential candidates and existing employees from inception through the course of employment, until termination., • Develop, evaluate, and update employment programs and opportunities to promote and track employment growth and upward mobility., • Prepare and maintain comprehensive documentation, records, and other reports as required., • Responsible for supervising and developing direct reports., • Develop and deliver effective training and awareness., • Anticipate and proactively resolve potential problems., • Maintain communication with key management and key stakeholders., • Continuously incorporate the use of technology for innovative ways to improve efficiency, • Continually update job knowledge and modify internal operational processes to remain competitive and current with the latest trends in the industry., • Bachelor's degree from an accredited university in Psychology, Counseling, Special Education, or other Health and Human services related field; Master’s Degree Preferred, • Relevant state licensure or certificate will be necessary., • 10 years relevant work and leadership experience in a multi-location environment, • Certified Case Manager (CCM) or Commission on Rehabilitation Counselor Certification (CRCC), • Graduate of an accredited Diploma, Associate or Baccalaureate School of Nursing., • Current Driver's License, reliable transportation, and provide ongoing valid and current auto liability insurance., • Two years of experience as an RN preferred in a healthcare/clinical environment., • Ability to communicate orally and in writing in a clear and concise manner., • Ability to maintain confidentiality of information., • Ability to manage time effectively and handle both internal and external conflicts., • Ability to make decisions and solve problems while working under pressure., • Detail oriented and strong organizational and interpersonal skills., • Strong business acumen, • Advanced knowledge of local, state and federal employment laws and wage and hour laws Commensurate with education and experience. BENEFITS: • 401(k) (employee contribution), • Employer paid Health Insurance, Life AD&D Insurance,, • Dental insurance, • Vision Insurance, • Long term and short term disability insurance available (paid by employer), • Employee assistance program San Antonio, TX, and travel to job-sites in nine states

Job Description Supply Chain Manager San Antonio, Texas, United States On Site | Full Time | Direct Hire Competitive Salary + Benefits Package Job Summary: Reliance One is seeking a Supply Chain Manager to join one of our clients in San Antonio, TX. This position will oversee supplier relationships, drive cost savings, manage procurement activities for new product development, and serve as the key liaison between suppliers and internal departments to ensure operational excellence. Responsibilities: • Own and manage regional and global supply chain partner relationships., • Identify, track, and execute significant cost-saving opportunities., • Oversee procurement within new product development programs., • Act as the escalation point for buyers and quality engineers., • Serve as the technical interface with suppliers to convey requirements., • Approve supplier price change requests in coordination with business managers., • Continuously drive cost reduction and improvement initiatives., • Liaise with Product Engineering, Manufacturing, Quality, and Application Engineering to manage supplier requests., • Develop and execute supplier contracts and agreements., • Manage RFQs and supplier quotation responses., • Participate in product development design gate reviews., • Align FMEA documentation between suppliers and internal standards., • Submit internal spend requests (MERs) for supplier tooling purchases., • Collaborate with Business Management to manage the total product business case., • Optimize supply chain efficiency — manage MOQs, inventory levels, and pricing strategies., • Support on-time supplier payments by coordinating with Finance and Shipping., • Lead contract reviews and ensure adherence to terms and conditions., • Develop supplier program timing for new product development and track progress., • Maintain open issues lists and RASICs to drive timely task completion., • Identify and resolve roadblocks to ensure successful program completion. Requirements: • Bachelor’s degree in Engineering, Business, Finance, or Mathematics (required)., • Bachelor’s or Master’s degree in Mechanical or Electrical Engineering (preferred)., • Skilled in developing project timing plans using Microsoft Project or similar software., • Strong understanding of automotive design and validation processes., • Proven ability to collaborate with cross-functional teams and influence without direct authority., • Strong mechanical aptitude; knowledge of fuel system devices preferred., • Motivated, adaptable, and technically diverse professional., • Understanding of internal combustion engine operation (preferred)., • Demonstrated proficiency in manufacturing and organizational processes., • Knowledge of quality processes such as PPAP, APQP, Inspection Processes, and Safe Launch. Equal Employment Opportunity Commission (EEOC) Statement Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionInvestment Operations ManagerAbout PAX Financial Group PAX Financial Group is a San Antonio–based Registered Investment Adviser committed to helping families and business owners manage wealth with purpose. Our mission is to equip people with personalized advice and strategic planning that fuels generosity, confidence, and lasting impact. Rooted in faith and inspired by 1 Timothy 6:17–19, we believe wealth is a responsibility, not just a resource. Our team is known for blending technical excellence with a deep commitment to client service, behavioral finance, and values-based investing. If you're looking to join a collaborative team where purpose, growth, and impact matter, we’d love to connect. Position Overview We are seeking a detail-oriented and strategic Investment Operations Manager to lead the execution and optimization of our firm’s investment operations. This role ensures seamless coordination across trading, reporting, billing, compliance, custodians, and internal systems while supporting the firm’s investment philosophy and high-touch client service model. The ideal candidate combines technical expertise with a mindset for process improvement and strategic oversight. This person will serve as the operational hub between investment systems, advisor support, and firm-wide initiatives that impact both client experience and organizational scale. Key ResponsibilitiesOperations & Systems Management • Serve as subject matter expert on Orion, Schwab, MoneyGuidePro, and integrated investment platforms (trading, reporting, billing)., • Oversee daily trade reconciliations and post-trade processing., • Maintain accuracy of Orion reporting and billing workflows across Schwab., • Coordinate daily data downloads, custodial reconciliations, and vendor integrations., • Lead workflow and system improvements to reduce errors, increase automation, and support advisor efficiency., • Collaborate with CSA Supervisor and Resource Manager on service procedures aligned with client experience., • Analyze operational metrics to identify trends, resource needs, or process gaps., • Support oversight of PAX’s internal models, including PAX 44, and build version 2.0 through a structured due diligence and visioning process., • Conduct SWOT analyses on models, positions, and alternatives (e.g., Ares, Monroe, Eaglebrook)., • Assist with platform oversight for Pontera, SmartX, BlackRock, and structured products., • Review structured note offerings and ensure alignment with advisor and client experience., • Support tax-loss harvesting execution and model alignment., • Attend advisor and client meetings as needed for portfolio alignment and case support., • Facilitate internal investment committee meetings and portfolio reviews., • Lead due diligence on direct indexing and alternative products. • Partner with the compliance team to maintain regulatory standards across all investment operations., • Ensure documentation and retention practices align with internal policies and audits., • CFA (Chartered Financial Analyst), • 5+ years in investment operations, trading, or portfolio administration in an RIA, asset management, or custodian environment, • Strong proficiency with Orion, Schwab, and investment functionality in MoneyGuidePro, • Excellent attention to detail, organization, and accuracy, • Strong analytical, problem-solving, and data interpretation skills, • Ability to manage multiple projects independently, • Experience with SmartX, CAIS, Pontera, or similar third-party investment platforms, • Familiarity with structured products, alternative investments, and direct indexingCultural Fit • You are energized by streamlining systems and solving problems before they happen., • You take ownership of your role and look for ways to help others succeed., • You enjoy working behind the scenes but understand the client impact of every detail., • You are aligned with PAX’s values

Job DescriptionAre we the road to your future? We are currently searching for an experienced Bridge Project Engineer to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, 6 years of engineering experience in bridge design. What you’ll be doing: • Perform/supervise calculations and analysis for designing bridge and transportation structures using various bridge design software programs, • Perform/supervise load ratings on bridges of various type size and complexity, • Review calculations and design details developed by others, • Attend meeting with clients and other professionals and organizations, • Develop solutions to challenges presented by the client within budget, schedule, and project constraints, • Review construction related submittals, • Organize and maintain project files, • Supervising and mentoring Structural EITs and Interns, • Bachelor’s Degree in Civil or Structural Engineering, • Master of Engineering preferred, but not required, • Valid Professional Engineering Licensure (P.E.), • 6 to 9 years of engineering experience in bridge design, • TxDOT experience is strongly preferred, • Skilled in the use of OpenBridge Designer, • Technical expertise for the layout & design of bridges and related highway structures, • Familiarity with rehabilitation of existing bridges and highway structures, • Knowledge of AASHTO and other pertinent bridge design specifications, • Familiarity of TxDOT bridge standards and design manuals is strongly preferred, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Austin Houston McKinney Rockwall Round Rock San Antonio Tyler TX #LI-SD1

Job Description Texas-based statewide Systems Integration Company seeks a Controls Engineer/Systems Integrator for municipal water/wastewater Supervisory Control and Data Acquisition (SCADA) Systems, electrical, instrumentation, and controls projects throughout Texas. Services include design, project management, PLC & HMI programming, deployment, testing, and commissioning with some service and technical support for existing customers in the SCADA industry. Duties: * Corporate liaison for local water/wastewater utilities on needs for system upgrades, service, and project support * Provides system programming and completes acceptance tests. * Maintains systems by problem solving, testing, diagnosing problems, and completing repairs on electronic control panels, radio communication devices, computer systems and networks, and software. * Maintains records by documenting original system, upgrades, and repairs; completes work orders for invoicing by central office. Complete project management documentation. * Complies with regulations by adhering to codes, specifications, and rules; reads blueprints and technical bulletins. * Keeps company-provided installation & service equipment and vehicles operating by following operating instructions to meet job duty requirements. * Updates job knowledge by completing re-certification, participating in educational opportunities, and reading technical publications. * Provides technical support for outside sales missions by completing related tasks as needed by area sales representatives. Skills and Qualifications: * Customer service orientation, professionalism, exemplary ethical conduct, technical understanding, system administration, problem-solving, communications * Must be mature, dependable, and thorough • Experience with any SCADA applications and HMI software (Ignition, VTScada, Wonderware, and iFix). Experienced with Allen-Bradley, Modicon, SCADAPack, Siemens, and GE PLCs. * This is a remote role, located in Weatherford, Texas with 50% travel. Required: * Excellent references, excellent driving record, electrical experience desired Benefits: • Company vehicle and equipment provided (employee to provide basic hand tools), • Per Diem paid for overnight travel, • Major medical for employees and dependents (100%) for base plan, • 3% 401k employer contribution after 1 year, • Health savings account, • Paid time off, • Full-time

Job DescriptionJob Summary: As a Rackspace Network Security Engineer, you’ll be a key element within our support infrastructure team and expected to provide a high level of technical support to our customers. You’ll own complex customer issues and keep our customers updated through every step of the process. You’ll be supporting many elements of the RackspaceCloud product portfolio. You’ll create and maintain customer loyalty by providing a fanatical experience above and beyond customer expectations. Work Location: · If located near a Rackspace office, you’ll work a hybrid schedule… 2 days in the office and three days remote.· If not located near an office, you may work 100% remotely. Discover your inner Racker: Racker LifeInformation on Rackspace benefits Key Responsibilities: • Be the technical point of escalation to the Cloud Support and Engineering teams; resolving customer issues., • Monitor and provide maintenance for all related infrastructure., • Ensure the control, integrity, and accessibility of the cloud environment., • Implements large, complex enterprise-class solutions., • Lead tasks relating to system architecture enhancements, problem management, fleet., • Lead Workload/Workforce Management and Optimization related tasks., • Provide technical expertise underpinning communications targeting a range of stakeholders - from individual contributors to leaders across the business., • Collaborate with Account Managers and Business Development Consultants to build strong customer relationships., • Share knowledge with other Engineers and Administrators on the support floor.Qualifications:, • Bachelor's degree in computer science or related field of study is preferred. High School Diploma is required., • Minimum of 5 years of relevant experience., • Palo Alto Networks Certified Next-Generation Firewall Engineer (PCNSE) certification is preferred., • Ability to work with F5 load balancers., • Experience with Palo Alto firewalls., • AWS Cloud experience., • Knowledge and experience with ethical hacking, firewall and intrusion detection/prevention technologies, secure coding practices and threat modeling., • Advance knowledge and experience of virtualization technologies, Windows and Unix/Linux operating systems., • Advance knowledge and experience of network and server hardware infrastructures and storage technologies (NAS, SAN)., • Experience with designing secure network architectures, identity and access management principles, application security, encryption technologies, DNS, SOA, database and web applications., • Must have excellent communication skills and the ability to articulate complex scenarios with clear solutions., • Ability to make appropriate decisions considering the relative costs and benefits of potential actions.Background Investigation, • This role will be supporting our US Government customers and all new hires must succesfully pass an investigation conducted by the US Federal Government., • US Citizenship is required. The anticipated starting pay range is: $128,300 - $188,210. Unless already included in the posted pay range and based on eligibility, the role may include variable compensation in the form of bonus, commissions, or other discretionary payments. These discretionary payments are based on company and/or individual performance and may change at any time. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, licenses and certifications, and specific work location..#LI-MF1 #LI-remote About Rackspace TechnologyWe are the multicloud solutions experts. We combine our expertise with the world’s leading technologies — across applications, data and security — to deliver end-to-end solutions. We have a proven record of advising customers based on their business challenges, designing solutions that scale, building and managing those solutions, and optimizing returns into the future. Named a best place to work, year after year according to Fortune, Forbes and Glassdoor, we attract and develop world-class talent. Join us on our mission to embrace technology, empower customers and deliver the future. More on Rackspace TechnologyThough we’re all different, Rackers thrive through our connection to a central goal: to be a valued member of a winning team on an inspiring mission. We bring our whole selves to work every day. And we embrace the notion that unique perspectives fuel innovation and enable us to best serve our customers and communities around the globe. We welcome you to apply today and want you to know that we are committed to offering equal employment opportunity without regard to age, color, disability, gender reassignment or identity or expression, genetic information, marital or civil partner status, pregnancy or maternity status, military or veteran status, nationality, ethnic or national origin, race, religion or belief, sexual orientation, or any legally protected characteristic. If you have a disability or special need that requires accommodation, please let us know. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description • Participate in the development and support of customer technical requirements, • Champion a collaborative, team-based environment, sharing standard methodologies and success and building positive relationships, • Plan, Design, Develop, Implement and Operate F5 products such as LTM, ASM, BIG-IQ and APM, • Manage the configuration on multiple physical and virtual F5 across multiple data centers, • Develop scripts and tools to automate configuration of a large number of network security devices distributed across multiple data centers, • Propose and implement system enhancements that will improve the performance and reliability of the network security infrastructure, • Applies capacity planning configuration changes as demanded by the business, • Address performance, scalability, and service architecture administration issues, • Design, install, configure, maintain network security services, equipment and devices, • Plan and support network security infrastructure, • Provide clear technical documentation and written procedures for issues identified and addressed, • Monitoring and troubleshooting of platform and OS based problems, network security infrastructure and connectivity issues, • Perform launch testing for new software releases and the introduction of new features, • Coordinate equipment orders including physical or virtual appliances, as well as upgrading, monitoring, testing and servicing the systems as needed, • Demonstrates knowledge of a broad range of technology towers i.e.: Storage, Virtualization, Intel, Networking, Data Center Migration and Disaster Recovery, • Knowledge of risk and controls landscape, ensuring company-wide standards are met, • Participate in change and incident management, • Anticipating potential problems and acting to minimize the impact they may have on the project or unit, • Bachelor’s degree in computer science, information systems, telecommunications, or an engineering focused field, • Must have an Active TS/SCI and willing to obtain a CI Poly, • 5+ years of relevant F5 experience with F5 LTM, ASM, BIG-IQ, and/or APM administration and life cycle management including experience with advanced iRule creation and troubleshooting, • Ability to handle multiple complex F5 configurations and deployments at once, • Understanding of networking at all layers of the OSI model; and Previous experience with web application technologies, • Experience deploying, managing, and troubleshooting network systems, switching, and routing protocol standards such as: TCP/IP, MPLS, OSPF, BGP, SDN, and 802.1x., • Experience managing and troubleshooting DNS, DHCP, IPAM, and NTP in a large multi-site environment, • Ability to manage multiple stands of work simultaneously., • Executes within a customer-centric environment., • Excellent verbal and written communication skill Hands on experience with Python and APIs, • Self-driven with the ability to manage workload without direct supervision, • Must have the F5 201 certification, • 8570 IAT Level II Certification required Preferred Skills/Qualifications Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? • Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS, • 401k Contribution from Day 1, • PTO + 11 Paid Federal Holidays, • Long & Short Term Disability Insurance, • Group Term Life Insurance, • Tuition, Certification & Professional Development Assistance, • Workers’ Compensation, • Relocation Assistance

Job Description Are we the road to your future? We are currently searching for an experienced Junior Structural CAD Technician to support our Southwest Region located in Texas. To be considered for this position, applicants must have, at minimum, a degree in Computer Aided Drafting or similar field and 3 years of prior experience with structural drafting. What you’ll be doing: • Provide assistance to engineers using OpenBridge Designer to create bridge detail plans and perform minor design work on bridge projects, • Contribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plans, • Prepare minor mathematical calculations and quantity calculations for roadway/bridge projects, • Work with engineers to develop 3D models using both Open Road Designer and Open Bridge Designer, • Research applicable design codes and guidelines to ensure design compliance, • Research design options and documents findings, • Coordinates assignments with project team and supervisor, • Perform quality control reviews of design plans and calculations, • Perform other duties as assigned by supervisor, • Be a team player and assist other groups as needed What you need to have: • Associate degree from a technical or four-year school, • 3-10 years of prior experience with structural and/or roadway drafting, • Degree in Computer Aided Drafting or similar field is preferred, • Familiar with TxDOT Bridge Detailing Manual and TxDOT Bridge Standards, • Experience in Open Road Designer is preferred, • Experience in Autodesk Civil 3D is a plus, • Excellent communication skills and ability to work within a team environment, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines, • If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role, • Valid driver’s license, • A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-SD1 TX

Job Description The Robotics Paint Engineer will lead the design, development, and implementation of robotic systems for paint applications, focusing on efficiency, accuracy, and reliability. They will collaborate with cross-functional teams to understand paint process requirements and translate them into robotic programming strategies. Responsibilities: • Program and optimize robotic systems, including Fanuc robots, for various paint applications, ensuring seamless integration with existing production lines, • Conduct testing and validation of robotic systems to ensure performance meets quality and safety standards, • Troubleshoot and debug robotic systems, identifying and resolving technical issues to minimize downtime and maximize productivity, • Stay abreast of emerging technologies and industry trends in robotic paint applications, continuously seeking opportunities for improvement and innovation, • Provide technical support and training to production staff on the operation and maintenance of robotic systems, • Collaborate with suppliers and vendors to source and evaluate robotic equipment and components, ensuring compatibility and reliability, • Participate in new product development projects, providing expertise on robotic paint applications and contributing to design reviews and feasibility studies, • Ensure compliance with all safety regulations and standards governing robotic systems and paint processes, • Oversee the setup, calibration, and maintenance of painting equipment and systems, • Conduct comprehensive analyses of paint defects, identifying root causes, and implementing corrective actions to uphold product integrity, • Drive continuous improvement initiatives aimed at reducing paint consumption, minimizing waste, and enhancing environmental sustainability • Qualifications: • Bachelor’s degree, • Master’s degree, • At least 7 years of experience in product manufacturingCompany DescriptionBranex Group is a Minority-owned Technical Staffing firm headquartered in Auburn Hills, MI. We are a Certified Women’s Owned Business through the Women’s Business Enterprise National Council (WBENC). We specialize in Engineering, Information Technology, Robotics, Human Resources, and Finance opportunities across the United States. Branex Group is committed to being an Equal Employment Opportunity Employer and fostering a diverse and inclusive workplace. We ensure all applicants and employees are considered without discrimination or harassment based on race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran status, disability status, genetics, or any other protected characteristic by State and Federal laws. Branex Group offers the following benefits: • Medical Insurance, • Dental Insurance, • Vision insurance, • Paid time off, • 401(k) This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.Branex Group is a Minority-owned Technical Staffing firm headquartered in Auburn Hills, MI. We are a Certified Women’s Owned Business through the Women’s Business Enterprise National Council (WBENC). We specialize in Engineering, Information Technology, Robotics, Human Resources, and Finance opportunities across the United States.\r\n\r\nBranex Group is committed to being an Equal Employment Opportunity Employer and fostering a diverse and inclusive workplace. We ensure all applicants and employees are considered without discrimination or harassment based on race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran status, disability status, genetics, or any other protected characteristic by State and Federal laws.\r\n\r\n\r\nBranex Group offers the following benefits:\r\n- Medical Insurance\r\n- Dental Insurance\r\n- Vision insurance\r\n- Paid time off\r\n- 401(k)\r\n\r\n This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionSalary: The PKI Engineering Subject Matter Expert / Senior Engineer will play a critical role in supporting the Air Force Public Key Infrastructure (AF PKI) Program by integrating and implementing PKI capabilities into Department of the Air Force (DAF) and other Services systems, applications, and workflows. This position ensures secure authentication and encryption across DAF networks while maintaining interoperability with Department of Defense (DoD) components. The engineer will provide technical expertise to project teams supporting AF PKI products, assist customers, track support requests, and document solutions to enhance future support efforts. This role requires a proactive, detail-oriented individual with expertise in PKI systems and a commitment to maintaining a secure and efficient cybersecurity posture. Job Duties PKI Integration and Implementation: Integrate and implement PKI capabilities into DAF and other Services systems, applications, and workflows to enable secure authentication and encryption, as directed by program requirements. Technical Expertise: Serve as a subject matter expert on project teams for AF PKI products. Report progress through tasks assigned in a project management tool. Attend regular meetings to discuss requirements, technical solutions, risks and mitigations, and recommended actions. Interoperability Assurance: Ensure seamless interoperability between AF or other Services PKI infrastructure and other DoD components to support a unified and secure operational environment. Customer Support: Provide technical assistance to customers for PKI-related issues, questions, or implementation and integration of PKI into their systems or applications. Address user and site issues via telephone, email, or electronic means. Request Tracking and Documentation: Develop and maintain a solution for tracking customer support requests, documenting efforts, and capturing associated information to facilitate future support and improve service delivery. Technology Evaluation: Evaluate emerging commercial and government technologies (e.g., RSA-4096, SHA-384, non-person entity certificates, derived credentials, FIPS 201 compliance, PKI on SIPRNet/NIPRNet/JWICS, mobile devices, SSO, web servers, MDM) for interoperability and feasibility with DoD/AF PKI, as directed by the Government; re-evaluate existing COTS solutions for compatibility with new features. System Maintenance: Assist with performing required actions to sustain the Technology Integration Cell (TIC), including configuring and maintaining hardware and software, applying security controls, and conducting patching. Resource Identification: Identify and recommend to the Government any software or hardware purchases necessary to keep the TIC operational and supporting testing objectives. Required Qualifications Technical Expertise: Demonstrated experience in integrating PKI capabilities into complex systems, applications, and workflows, with a focus on secure authentication and encryption. Proficiency in testing, configuring, and deploying software and hardware updates for PKI systems. DoD Knowledge: Familiarity with DoD and DAF systems, policies, and infrastructure, including an understanding of interoperability requirements across DoD components. Problem-Solving Skills: Ability to troubleshoot and resolve technical issues related to PKI implementation and provide effective customer support. Documentation Skills: Proficiency in developing and maintaining tracking systems and documentation for technical support requests and solutions. Security Clearance: Must possess or be eligible to obtain and maintain a minimum Secret clearance, with all employees cleared to at least Secret by the contract start date of June 1, 2025. Location: Ability to work in San Antonio, TX, with potential for on-site support at the Government-leased facility as required. Education: Bachelors degree in related field. Preferred Qualifications Security Clearance: Active Top Secret (TS) or Top Secret/Secure Compartmented Information (TS/SCI) clearance. PKI Specialization: Advanced knowledge of PKI systems, certificate management, and cybersecurity best practices within a DoD context. Experience with DAF Systems: Prior experience integrating PKI into DAF-specific systems or applications. Specific experience with AF Less Than Medium Assurance or Only Locally Trusted PKI systems. Communication Skills: Strong verbal and written communication skills to effectively assist customers and collaborate with DoD stakeholders. Certifications: Relevant certifications such as CompTIA Security+, CISSP, or other DoD 8570/8140-approved Information Assurance certifications (e.g., IAT Level II or higher). Adaptability: Experience working in dynamic environments where requirements may evolve, such as supporting DoD or DAF initiatives that introduce new or updated technical needs. Expertise: Experience or education in any of the following: authentication (ex. Multi-Factor Authentication, Single Sign On), post-quantum cryptography, Linux, cloud-based systems, networking, or AI and machine learning.

Job Description Key Responsibilities • Process Optimization: Establish and refine molding parameters to maximize efficiency, minimize scrap, and ensure consistent quality., • Troubleshooting & Problem-Solving: Diagnose and resolve defects, machine issues, and process inefficiencies scientific molding principles., • Tooling & Equipment Management: Work with tooling suppliers and internal teams to ensure proper mold maintenance, modifications, and performance optimization., • Material & Machine Parameters: Select appropriate materials (PP, ABS, Nylon, and other automotive-grade resins) and set up injection molding machines for optimal production., • Continuous Improvement: Apply Toyota Production System (TPS), Kaizen, and Lean Manufacturing principles to drive cost savings and efficiency improvements., • Quality Control: Ensure parts meet IATF 16949 and ISO 14001 quality standards, utilizing DOE (Design of Experiments) and other statistical methodologies., • Collaboration: Work closely with production, maintenance, and quality teams to drive improvements in safety, efficiency, and defect reduction., • New Product Development: Assist in launching new molds, engineering changes, and process development for upcoming Toyota model updates., • Waste Reduction: Decrease scrap rates and improve first-pass yield., • Quality Performance: Ensure defect-free parts that meet Toyota’s stringent quality expectations., • Process Efficiency: Reduce cycle times and improve overall equipment effectiveness (OEE). Qualifications & Skills • Education: Bachelor’s degree in Plastics Engineering, Mechanical Engineering, Manufacturing Engineering, or a related field. Equivalent experience may be considered., • Experience: 5 to 10 years of injection molding experience (preferably) in a Tier 1 automotive manufacturing environment., • Technical Knowledge:, • Strong experience with Yushin, Yaskawa (Motoman), Star,Fanuc, UR Robots and injection molding machines., • Understanding of hot runner systems, mold flow analysis, and mold maintenance., • Expertise in scientific molding, decoupled molding, and root cause analysis (5Why, Fishbone, etc.)., • Familiarity with Toyota Production System (TPS), Lean Manufacturing, and Six Sigma methodologies., • Software Proficiency: Experience with Moldflow, CAD software (SolidWorks, AutoCAD), and ERP/MES systems., • Bilingual (Preferred): English/Spanish is a strong plus., • Certifications (Preferred): RJG Master Molder Certification, Six Sigma Green Belt, or equivalent industry certifications. Additional Information • Work Environment: Manufacturing facility with exposure to noise, machinery, and varying temperatures., • Physical Requirements: Ability to stand, walk, and lift up to 50 lbs. as needed for troubleshooting and machine setup., • Schedule: May require occasional weekend or off-shift support depending on production needs. Toyoda Gosei NA provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description The Application Engineer acts as a key technical liaison between customers, the sales team, and engineering, ensuring generator systems are properly specified and integrated to meet project requirements. This role is instrumental in influencing project specifications by providing accurate technical information and serving as a trusted resource for the consulting engineering community throughout the territory to promote Caterpillar equipment standards. Essential Responsibilities: • Collaborate with sales teams and customers to define technical requirements and recommend customized generator solutions, • Interpret specifications, load requirements, and site conditions to select and size generator systems, including auxiliary components, • Develop technical documentation, including drawings and submittals, to support proposals and project execution, • Coordinate with internal teams (engineering, production, and service) to ensure correct configuration and successful project delivery, • Provide technical expertise and application support to the sales team and customers, including onsite presentations and consultations, • Assist with troubleshooting and resolving complex integration and application issues, • Stay informed on relevant codes and standards (e.g., NFPA, NEC), as well as emerging technologies in power generation, • Support special projects as assigned by the EP Sales Manager, • Adhere to all safety policies and procedures; maintain compliance with company standards, • Perform other duties as assigned Qualifications & Skills: • Deep understanding of power generation principles and application engineering best practices, • Proficiency in sizing and specifying generator systems, including ATS, switchgear, and control systems, • Strong working knowledge of Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Access), • Familiarity with federal, state, and local regulations, including emissions and fire protection standards, • Excellent business acumen, with a high level of accuracy and attention to detail, • Knowledge of HOLT CAT Commercial Engine Sales operations and Dealer Business System (DBS) is a plus, • Strong communication and interpersonal skills, including technical writing and presentations, • Proven critical thinking and problem-solving abilities, • Strong organizational skills and the ability to manage multiple projects simultaneously under tight deadlines, • Ability to provide value-driven consultation and influence technical project specifications, • Resilient under pressure, with a professional and collaborative demeanor, • Able to work independently, take initiative, and accept feedback constructively Education and Experience: • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field, • 2+ years of experience in an application, systems, or sales engineering role—preferably within power generation or related industries, • PE license or working toward EIT/PE certification is a plus Supervisory Responsibilities: None Travel: • Travel up to 45%, and some overnight travel may be required, • Valid driver’s license required Physical Requirements: • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines Work Environment: • This job is generally performed in a professional office environment, • Occasionally works outdoors and may be exposed to weather extremes conditions that include inclement weather, heat, cold, and humidity, • Frequently works at a fast pace with unscheduled interruptions Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT

Job DescriptionSalary: Position Summary: The Data Integration Engineer will own the design, build, and operation of scalable data pipelines and warehouse models that power analytics and operational reporting. Youll integrate diverse sources (databases, APIs, SaaS apps, flat files), and engineer performant ELT/ETL in the cloud. Youll collaborate closely with analytics, app dev, and business stakeholders to turn requirements into trusted, production-grade datasets. Duties/Responsibilities: Data Pipeline Development • Design and implement scalable ETL/ELT pipelines (batch and near-real-time) to ingest from databases, APIs, SaaS, and flat files into Snowflake, Azure Synapse, or similar., • Build integrations using tools such as Azure Data Factory (ADF), Fivetran, CData Sync, and Boomi; extend with custom code where needed., • Write clean, maintainable code (primarily SQL, plus Python or PHP when required for custom connectors, transformations, or microservices)., • Optimize workflows for performance, reliability, and scalability (partitioning, parallelism, incremental loads, CDC, idempotency, retry/rollback)., • Manage Datawarehouse platforms such as Azure Synapse and Snowflake, • Develop and maintain data models, schemas, views, and stored procedures; manage staging/core/mart layers and source to target mappings., • Implement data quality validation and monitoring (null/dup/range checks, schema drift detection, reconciliation)., • Respond to and troubleshoot errors identified., • Complete complex SQL queries, refactors (window functions, CTE chains), and performance tuning (explain plans, pruning, join strategy)., • Partner with data analysts and stakeholders to clarify requirements and acceptance criteria and translate into source to target and technical designs., • Maintain technical specs, data flow diagrams, and operational procedures; contribute to standards and reusable patterns. Qualifications: The ideal candidate will possess the following abilities, attributes, experience and skills: • 4+ years experience in Data Warehousing and Data Engineering., • Strong experience with Data Warehouse as a Service (DWaaS) platforms (Snowflake, BigQuery, etc)., • Strong SQL skills and ability to write queries and data extracts., • Experience working with different database types, • Experience working with and troubleshooting different ETL tools such as Azure Data Factory, Boomi, Fivetran, and CData Sync., • Strong understanding of DWaaS database architecture and ability to design and build optimal data processing pipelines., • Demonstrated skill in designing highly scalable ETL processes with complex data transformations, data formats including data cleansing, data quality assessment, error handling and monitoring., • Design, develop, manage, and monitor complex ETL data pipelines and support it through all environment runways., • Experience with Python/JavaScript or other scripting languages is a plus., • Provide Support and troubleshooting for data platforms., • Manage and prioritize multiple assignments., • Ability to work individually and as a team., • Provide technical guidance and mentoring for other team members., • Good communication and cross functional skills. Bridgehead ITis proud to be an equal opportunity workplace and is an affirmative action employer.

Job DescriptionSalary: LMR Technical Group (LMR) is seeking a Curriculum Coordinator to join our team. Location: JBSA Randolph, TX Job Description: The Curriculum Coordinator is responsible for the development, standardization, and continual improvement of all instructional materials within the CRAFT program. This individual ensures instructional effectiveness and curriculum alignment. Duties and Responsibilities: • Manage development and revision of all syllabi, lesson plans, and courseware., • Coordinate feedback from CRAFT staff and submit updates for approval., • Ensure curriculum alignment with scientific best practices and mission needs., • Track review cycles and updates using project management software., • Implement iterative and continuous process improvement practices., • Support research initiatives and curriculum-related data collection in coordination with the CRAFT program office., • Attend, assist planning, and present at summits, training events, and DV visits as requested., • Other related duties as assigned. Required Qualifications: • Masters or Doctoral degree in Human Performance, Education, or related field., • 5+ years of experience in curriculum design and instructional delivery., • Familiarity with tactical or aviation training environments., • Current CPR and AED certification., • Working knowledge of Microsoft Planner (preferred) or similar project tracking software., • U.S. citizenship is required to obtain a Secret clearance and work in this position. *This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required by this position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits Include: • Medical, Dental, and Vision Insurance, • Life, AD&D, and Short-Term Disability Insurance, • 401(k), • Paid Time Off, • Paid Holidays, • Employee Assistance Program, • Continuing Education Reimbursement Program About LMR: LMR is a service-disabled veteran-owned small business that supports technology development and provides comprehensive joint warfighter training by leveraging the skills, experience, and knowledge of its personnel. LMR Technical Group is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. If you are a qualified applicant with a disability in need of an accommodation to complete the application process, please contact us at . EOE Disability/Veteran. EEOC Know Your Rights E-Verify Participation Poster Right to Work Poster Employee Polygraph Protection Act Poster FMLA Poster

Job DescriptionCompany Description About KIPP Texas Public Schools KIPP Texas Public Schools is a network of 54 public charter, open-enrollment, pre-k-12 schools educating nearly 32,000 students across Austin, Dallas-Ft. Worth, Houston, and San Antonio. Together with families and communities, our mission is to create joyful, academically excellent schools that prepare students with the skills and confidence to pursue the paths they choose —college, career, and beyond—so they can lead fulfilling lives and build a more fair world. Founded in Houston in 1994 and operating as KIPP Texas since 2018, we are looking to hire a diverse team of dynamic, collaborative, and dedicated individuals with an unyielding belief that every child will succeed. KIPP Texas is a team and family with an unwavering commitment to creating classrooms, offices, and communities rooted in collaboration, academic success and joy. KIPP Public Schools is a national network of public charter schools that prepares students with the skills and confidence to create the future they want for themselves, their communities, and us all. We are a network of 278 schools, nearly 15,000 educators, and 123,000 students and alumni. Job Description KIPP Texas Early Literacy Instructional Lead The Early Literacy Lead is an exciting opportunity for an individual with deep content knowledge of literacy at the primary school level (PreK through 2nd Grade) and passion for curriculum and instruction. The Early Literacy Lead will play a critical role at the state-level in one of KIPP’s most progressive reform efforts in order to drive improved student results, including growth and achievement, college and career readiness, and closing the achievement gap. Position Overview The Early Literacy Lead is responsible for leading the strategy and implementation of state literacy priorities, including building teacher and API content knowledge in foundational literacy through leading Reading Academies learning in order to improve and accelerate student achievement across PreK-2 classrooms. This role can require travel to all four KIPP Texas regions (Austin, Dallas/Ft. Worth, Houston & San Antonio), and about 75% of time will be spent in schools and classrooms. General Role Description * Implementing the KIPP Texas Early Literacy Strategy: Execute KTX multi-year PreK-3rd grade early literacy initiatives through strategic, region-specific support across the state including but not limited to the Texas Reading Academies. * Reading Academies Cohort Lead: Lead Reading Academies Module learning and facilitate coaching cycle with learning in alignment with School Leader development of Literacy Instruction and Achievement.. * Coaching: Coach and support PreK instructional leaders, Reading Academies participants, including but not limited to Assistant Principals of Instruction (APIs) and teachers to grow and achieve goals literacy as aligned to our statewide implementation plan. * Data Analysis: Analyze data at student-level, teacher-level, school-level and regional-level to identify strengths, opportunities for growth aligned to the Science of Teaching Reading, and curricular and implementation implications. Duties and Responsibility The Early Literacy Lead responsibilities will include, but not be limited to the following: * Manage success of Reading Academies implementation for assigned cohorts * Lead implementation of state literacy priorities, including but not limited to reading growth assessment/s, foundational literacy across the state for grades PreK-3. * Develop, manage, and lead literacy pilots across the state to innovate and try new programs, structures, and strategies; gather implementation data and artifacts on a weekly basis to make statewide programmatic recommendations for future years. * Serve as a model of the three instructional coaching power moves – intellectual preparation, instructional coaching, and data-driven instruction. Coach regional Early Literacy leads, APs, SLs, and regional academics teams members across the state in the power moves when coaching in schools. * Conduct Texas statewide and region-specific data analysis to guide regions around intentional data driven response in instruction. * Work with the Director of Foundational Literacy and Instructional Excellence team to maintain strong curriculum and implementation feedback cycles, vertical alignment and streamlined literacy support across all grades. * Support KTX regions in developing their literacy-specific professional learning scope & sequence and professional learning plans. * Plan and lead virtual and in-person literacy professional development for Reading Academies participants K-3 including lesson internalization, module internalization, and responding to data Qualifications Skills and Qualifications Content and Pedagogical Expertise *Texas Reading Academies Cohort Leader screener required to complete the responsibilities of this role. Proof of passing the Texas Reading Academies Cohort Leader screener will be required prior to starting employment. For more information about completing the Reading Academies Cohort Leader Screener click here. * Strong knowledge and believe in the college-ready bar for students in literacy; exceptionally high standards for rigor and the belief that all students can achieve at high levels * Expert in literacy in the early primary grades (Pre-K through 3rd Grade) with a strong knowledge of the full literacy continuum (Pre-K through 12th Grade) * Strong knowledge of the components of balanced literacy, with a particular focus on Foundational Literacy (phonemic awareness, phonics, fluency, vocabulary and comprehension) * Strong background and familiarity with literacy assessments, with a particular focus on reading growth assessments * Master teacher in literacy with strong skill in internalizing curriculum and modeling lessons * Strong coach of teachers with expertise in observation and feedback * (Preferred) Strong coach of leaders with the ability to model strong coaching and school leadership Technical Skills * Detail oriented and obsessed with accuracy, especially in the areas of curriculum and assessments * Ability to create own work plan and can project plan around multiple priorities and fast-paced deadlines * Able to succinctly present summaries and updates * Can work across multiple modes of communication (virtual and in-person) to impact others and achieve goals * Advanced understanding of Microsoft Office suite Communication, Interpersonal and Team Skills * Builds and maintains strong relationships across a variety of levels and stakeholders * Strong verbal and written communication skills; tailors message for the audience, context, and mode of communication * Motivates others to work in partnership toward ambitious goals * Builds consensus and resolves conflicts; exhibits willingness to have difficult conversations * Skillfully navigates systems and structures at various levels in a large district * Comfortable in ambiguity and can take abstract ideas into concrete work plans and products Problem Solving and Systems Level Thinking * Understands how various systems, departments, and stakeholders interact to achieve short and long-term goals * Makes decisions using data and takes initiative to solve problems and create stakeholder buy-in * Can exhibit flexibility when faced with shifting priorities, demands, and timelines through analytical and problem-solving capabilities * Identifies and prioritizes mission critical issues and offers innovative solutions to seemingly intractable problems * Exhibits strong focus on goals and results and sets clear metrics for success Leadership skills * Motivates, inspires, and moves other adults to action to achieve ambitious goals * Builds coalitions and works collaboratively with diverse stakeholders at all levels, including but not limited to regional leaders, School Leaders, coaches, teachers, and students * Establishes clear expectations, deliverables and deadlines across organizational layers Empathy and Commitment to Cause * Deep belief in the mission and values of KIPP and commitment to improving student achievement * Passionately believes that all students can achieve at high levels * Demonstrates cultural competence and a deep understanding of and empathy for issues facing students and urban school districts Goals * 80% of K-2 KIPPsters reading on grade level as measured by DIBELS * 90% of Pre-K KIPPsters will be “on track” for vocabulary and phonological awareness (including syllabication, onset-rime, and alliteration) as measured by the CIRCLE assessment. * 100% of new K-3 teachers complete Reading Academies for their enrolled course. * All new K-3 teachers receive required coaching sessions, aligned to Texas Reading Academies (4x year) Additional Information KIPP provides equal employment opportunities for all applicants and employees. As an equal opportunity employer, we hire without consideration to race, religion, creed, color, national origin, age, gender, sexual orientation, marital status, veteran status or disability.

Job Description The Outside Sales Representative is responsible for the retention of existing customer base with continued sales growth. Develops assigned territory, implements sales plans to grow business and maintain current customer base. Sources and grow sales with new business opportunities within assigned market area/territory. Collaborates with District Sales Manager and Branch Manager to execute business plan. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources;3) Participate in ongoing self-development. Essential Functions: • Responsible for the sales and marketing of rental and purchase of equipment, • Provides service and support of existing customer base, • Sourcing new business opportunities, • Prepares and presents sales contracts/lease agreements, • Prepares sales plans, sales reports, expense, and daily call reports, • Develops new accounts and maintaining accounts from previous year, • Formulates bids on new and existing jobs and projects, • Identifies and acquires new service contract opportunities, • Receives customer orders and serves as the customer contact point, • Generates a referral network to assist in increasing the client base, • Occasionally assists in familiarizing customer on equipment and vehicles, • Aids in implementing, sustaining, and developing quality improvement processes that focus on safety, financials, operations, and customer service, • Maintains records of sales or other business transactions, • Prepare sales or other contracts, • Demonstrated knowledge of construction equipment and rental industry, • Demonstrated knowledge of selling techniques (prospecting, overcoming objections, closing sales), • Excellent selling, negotiating, and closing skills with ability to build long term business relationships, • Proficient with MS Office Word, Excel, Outlook, etc., • Understands the implications of new information for both current and future problem-solving and decision-making, • Uses logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems, • Exceptional attention to detail, • Excellent communication and interpersonal skills to establish working relationships with multiple departments and various levels of the organization, • First-class organizational, multi-tasking, and time management skills, deadline oriented, • Understands written sentences and paragraphs in work related documents, and communicates effectively in writing as appropriate for the needs of the audience, • Ability to perform mathematical computations such as percentages, fractions, addition, subtraction, multiplication, and division quickly and accurately, • Ability to work independently and within a team in a fast-paced, high volume environment with emphasis on accuracy and timeliness, • Ability to read, analyze, and interpret professional journals, technical procedures, or governmental regulations, • Minimum of one to three years of work-related skill, knowledge, or experience is required. Three to five years of experience preferred, • High school diploma or equivalent with some college coursework or an equivalent combination of education and experience preferred, • This position involves extended periods in a stationary position; additionally, occasional movement inside the office to access office machinery, file cabinets, etc., • This role frequently communicates with others, must be able to exchange accurate information in these situations, • This job is generally performed in a retail and office environment; exposure to computer screens; exposure to noise, dust, grease, fumes, gases, heat, cold, and inclement weather conditions Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-TFR

Job Description Atwell, LLC is a bold leader in the consulting, engineering, and construction services industry, delivering a broad range of creative solutions to clients in the real estate & land development, and energy markets. We have a strong national presence and a diverse, award-winning project portfolio. Atwell is a privately owned company, with 2,000+ passionate team members across 55+ locations and growing! Atwell, LLC is a proud recipient of the following 2024 awards: • Nine consecutive years in a row as a "Best Place to Work" (#16) by Zweig Group, • Recognized as #10 in the "Top 100 Fastest Growing AEC Firms" in the U.S. by Zweig Group, • Recognized as #71 in the ENR Top 500 Design Firms, ranked in every region., • Recognized in Crains "Fast 50" as one of the fastest-growing firms based in Michigan. As a Distribution Designer at Atwell, you will play a crucial role in supporting project teams through design work on both overhead and underground distribution electrical facilities. This position involves addressing intricate engineering challenges across a variety of projects, working with electric utilities and private developers. Key Responsibilities: • Distribution Overhead lines:, • Pole replacement, PCB transformer replacements, large infrastructure projects and line expansions., • Distribution generation, line refurbishment, and new construction (wood and composite poles)., • Grid Modernization: Smart switches & battery storage:, • Switch replacements, internal line conversions, rebuilds, voltage conversions and major projects., • Distribution Underground lines:, • Replacement of underground feeders including but not limited to identifying splicing, installation of padmounts ,secondary enclosures, and switch gears., • Designs including overhead to underground transitions., • New Customer connections, • Residential design, • Commercial design, • Subdivision design, • Street lighting, • Upgrade work on existing customer connections, • Design overhead and underground distribution electrical facilities and also work on projects including but not limited to: system improvement pole locations, substation design, and service design., • Address engineering challenges on diverse projects of varying sizes and scopes., • Collaborate with electric utilities and private developers., • Maintain a keen focus on precision and technical expertise., • Knowledge of NESC, ArcFm Gis , SAP, Work Manager Software (overhead and underground)., • Experience working on distribution, transmission, system improvement projects, substation design, service design, and switch replacements., • 1-2 years of relevant experience preferred., • Proficiency in one of the following MicroStation, AutoCAD, and GIS is required., • AUD (Automated Utility Design) experience is a bonus., • Apply problem-solving abilities for large utility clients., • Utilize and learn engineering software packages for distribution design., • Background in Electric Distribution, Natural Gas Distribution, and/or Communications (Fiber)., • Strong math and engineering skills, including structural analysis, sag analysis, basic algebra, and geometry., • Understanding and adherence to the National Electric Safety Code (NESC) and client requirements. #LI- TK1 Atwell Benefits: To attract and retain the best professionals in the industry, we aim to provide an excellent working environment and a progressive benefits program designed to support your personal and professional needs. Work/Life: • Generous Paid Time Off, • Paid Parental Leave, • Flexible work schedules are available for some positions, • Competitive Compensation packages, • Annual bonuses, spot bonuses and peer recognition awards, • 401K match - 1:1 up to 4% of compensation, • Tuition Assistance, • Student Loan Repayment up to $25K, • Paid Licensing / Certification Fees and Renewals, • Financial Rewards for Obtaining Licensure, • Employee Referrals up to $5,000, • Annual Wellness Reimbursement up to $500 for anything wellness related (Gym memberships, fitness tracker, home gym equipment, etc.), • Medical (BC/BS), Dental (Delta), and Vision (VSP), • Family Planning & IVF Benefits, • Pet Insurance, • Health Savings Account & Flex Spending Account options, • Employer paid LTD, STD, and life insurance, • Metlife Supplemental Benefits covering accident, hospitalization, and critical illness, • Member Assistance Program (MAP) with complimentary counseling sessions, legal benefits, financial consultations, and work/life referral services

Job Description Ardurra is seeking an experienced Senior CAD Designer to join our San Antonio, TX team Primary Function: Under general direction, performs moderately-difficult to difficult design assignments which require the application of advanced design techniques in accordance with company and industry standards and codes. Most assignments are performed with minimal guidance. This is the senior-level design position. Primary Duties: • Applies experience with, and is able to utilize, the company’s procured software systems latest release of MicroStation and other Bentley support products such as Geopak or OpenRoads, • Has solid experience with adhering to industry CAD standards, • Demonstrates a basic understanding of the latest releases of Microsoft Windows, Outlook, Word, Excel, Adobe PDF, and Windows File Explorer, • Is able to mentor and train engineering interns, drafting, and other design staff, • Maintains in-depth knowledge of civil engineering basics including sheet organization, topographical data, scales, coordinate systems, site grading and volume calculations, • Prepare preliminary and final drawings, plans, profiles and exhibits from engineering sketches, verbal instructions, specifications and supporting documentation according to latest company, industry and client standards using AutoCAD and MicroStation, • Assist Engineers with collecting field data and applying it to design drawing and exhibits, • Ensure accuracy of drawings and maintain production schedules, • Work with other CADD Technicians and Engineers and be part of a design team, • Demonstrate attention to detail and ability to communicate with team members, • Maintain soft and hard copies of all project related documents per the company filing system, • Research, understand, and apply published CADD and Design standards applicable to work assignments, • Effective oral and written communications skills, • Must be able to visually observe and differentiate details and colors of objects, recognize sound, tone and pitch; adjust to interruption and changes; work in hot, cold, and noisy work areas; stand, walk and sit for extended periods; climb stairs and ladders; deal with people in tense situations, and lift up to twenty (20) pounds, • Must have State Driver’s License and carry applicable State mandated auto insurance Required Experience • Requires 5+ years of related experience in civil engineering environment: Roadway, Drainage, Water Wastewater Improvements, • High School Diploma or GED; or any equivalent combination of education and applied experience in civil engineering environments: Roadway, Drainage, Water Wastewater Improvements, • Associate's degree is desirable. While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. Ardurra is an Equal Opportunity/ Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity or sexual orientation. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-KB1

Job Description An Automotive Service Manager takes on many different roles as they manage the day-to-day operations including: generating sales, communicating with customers, building client relationships, and managing the technical team. Position Responsibilities: • Perform a high volume of warm calls to potential customers (must have excellent phone sales and the ability to complete a one-call close), • Engage and consult incoming customers, both in-person and over the phone, to successfully generate and close sales., • Meet, greet, and recommend services to customers., • Manage technician workflow and the status of the customers vehicles’ repairs., • Order parts and inventory., • Daytime work hours, • Growth opportunity, • Competitive pay = 100% Commission, • Minimum of 2+ years of sales experience, • Strong commitment to customer service and relationship building., • Ability to communicate and use interpersonal skills at a sustained high level., • Capable of multi-tasking and executing in a fast-paced environment., • Coachable, honest, and goal-oriented team player., • Must have a valid driver's license.

Job Description Location: TBD Reports To: Foreman / Supervisor / Project Manager Job Type: Full-Time Travel Required: [As applicable] Position Summary: We are seeking an experienced and motivated Lead Technician to manage and guide a team of 10–30 technicians on infrastructure projects within a fast-paced data center environment. This position requires strong leadership, technical skills, and a proactive approach to ensure daily tasks are executed safely, efficiently, and to the highest quality standards. The ideal candidate has a deep understanding of structured cabling, racking systems, and power connectivity, and is capable of bridging the gap between field technicians and site leadership. Key Responsibilities: • Direct day-to-day tasks of a team of technicians performing rack installations, cable pulling, terminations, labeling, testing, and clean-up, • Ensure all work is performed according to site standards, project specifications, and safety guidelines, • Perform hands-on work while monitoring quality control across the team, • Provide technical guidance and mentorship to junior technicians, • Act as the liaison between crew members and the Foreman/Supervisor to communicate progress, issues, and material needs, • Track daily work progress and provide status updates to site leadership, • Support training efforts to elevate technician skills and promote best practices, • Maintain a clean, organized, and safe work environment, • Assist with conflict resolution and problem-solving in the field, • 3–5 years of experience in structured cabling, electrical, or data center infrastructure roles, • 1+ years of experience leading crews or serving in a team lead capacity, • Bilingual (Spanish/English) preferred, but not required, • Strong working knowledge of structured cabling (copper and fiber), racking systems, and power delivery, • Ability to read and interpret construction drawings, cable maps, and labeling schedules, • Clear communication skills — both verbal and written, • Ability to delegate, prioritize, and adapt to shifting project needs, • Ability to stand, bend, and lift throughout the shift, • Must be able to lift 50 lbs and work on ladders or lifts as needed, • Comfortable working in live data center environments and construction settings, • OSHA 10 or 30, • BICSI Installer II or Technician, • Manufacturer certifications (e.g., Corning, Panduit, Commscope) Powered by JazzHR Ht4gWEZL20

Job Description Assembly Seibi Technician On-Site | Full-Time | Contract | Benefits begin day 1 San Antonio, Texas, United States Position Overview: We are seeking an experienced Assembly Seibi Technician to support equipment installation, modification, and optimization in a fast-paced manufacturing environment. This hands-on role involves reviewing designs, verifying performance, implementing improvements, and providing training to ensure safety, quality, and productivity standards are met across all phases of production. Key Responsibilities: • Review equipment specifications and designs, identify improvement opportunities, and conduct vendor buyoffs to confirm functionality and compliance., • Install equipment and verify performance to meet safety, quality, and productivity requirements., • Investigate and implement modification requirements based on performance trials and production data., • Minimize project time and costs by confirming equipment functionality at vendor sites prior to installation., • Oversee vendor installation and facilitate Kanban processes to ensure smooth integration., • Conduct online vehicle trials and implement adjustments to enhance equipment quality and productivity., • Verify quality results using secondary methods (torque checks, vacuum profiles, etc.)., • Install, configure, and troubleshoot Toyopuc and Allen-Bradley program controllers., • Provide training to maintenance teams on new or modified equipment., • Act as a subject matter expert and share technical knowledge with local maintenance and production teams. Qualifications: • 2+ years of experience in PLC programming and troubleshooting (Toyopuc, Siemens, Omron, Mitsubishi, or Allen-Bradley)., • Strong understanding of electrical circuits and industrial controls (minimum 2 years)., • Associate degree or trade school completion in Electrical Engineering Technology (EET), Industrial Maintenance Technology, or related field — or equivalent experience., • Ability to read and interpret mechanical/electrical drawings., • Willingness to travel up to 50% (including international travel) and work up to 30% overtime as required., • Physically able to lift up to 40 lbs, perform frequent standing, bending, and climbing, and work in various environments (hot, cold, or confined spaces). Preferred Qualifications: • 2+ years of industrial maintenance experience., • Knowledge of industrial robot programming and teaching., • Experience with AGV/AMR setup and programming., • Understanding of safety scanners and related programming., • Familiarity with industrial networking (EthernetIP, FLNet, ProfiNet, etc.)., • Previous automotive manufacturing experience. Equal Employment Opportunity Commission (EEOC) Statement Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Description Who We Are Headquartered in Quitman with multiple offices across the state, Jackson Construction has been a leader in the K-12 market, serving Texas communities for more than 41 years. As a general contractor in the commercial construction industry, Jackson Construction consistently exceeds its customers' expectations through team work and a safety-first approach, while steadily increasing its reach across multiple market sectors. Position Summary As our Carpenter, you will construct, install, and repair structures and fixtures using wood, metal, and other materials, ensuring high-quality craftsmanship and adherence to project specifications. We'll count on you to interpret blueprints, measure and cut materials accurately, and collaborate with the construction team to deliver projects safely and efficiently. In this key role, you'll need strong technical skills, attention to detail, and the ability to adapt to evolving project demands while maintaining a commitment to safety and quality. Essential Duties and Responsibilities Construction and Frameworks * Measure, cut, and assemble wood and other materials to build structural frameworks for walls, floors, and roofs in compliance with blueprints and building codes. Installation and Finishes * Install doors, windows, cabinets, trim, molding, and other interior and exterior fixtures with precision and attention to detail. Repair and Maintenance * Repair existing structures, replace damaged components, and ensure durability and safety standards are met. Safety and Compliance * Follow safety protocols, building codes, and company policies at all times. * Maintain tools and equipment in proper working condition to promote a safe and efficient work environment. Team Collaboration * Coordinate with superintendents, project managers, and other trades to align carpentry work with overall project objectives. Material and Resource Management * Utilize materials efficiently to minimize waste and support cost-effective project delivery. Qualifications • Carpentry experience in commercial construction., • Ability to read and interpret blueprints, drawings, and specifications is preferred., • Proficiency with hand tools and power tools customary to the job., • Knowledge of building codes, safety regulations, and construction practices., • Strong attention to detail and commitment to quality workmanship. You must be able to twist, stoop, bend, squat, kneel, crawl, and climb stairs and ladders frequently, with the ability to walk on uneven ground and work above ground on scaffolds. Standing for up to seven hours during an eight-hour shift is also expected. Requires the ability to maintain balance on uneven surfaces and scaffolding at various heights, ensuring safety in all work conditions. Good finger manipulation is essential to handle tools effectively and operate equipment. Team members must be able to carry and use hand tools, climb on both light and heavy equipment, and lift items weighing up to 50 pounds, with assistance required for heavier items. Must have depth perception to navigate safely around hazards, and the ability to hear horns and sirens on moving equipment. Outdoor work in temperatures from 25 to 115 degrees Fahrenheit is also required.

Job DescriptionJob Title: Aircraft Structures Mechanic Job Description We are seeking a dedicated Associate Structures Mechanic to join our C-17 and E4B teams in San Antonio, TX. These roles demand regular and predictable attendance and a commitment to excellence in structural modification and repair. Responsibilities • Perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas., • Locate blind holes necessary for installation of new structural items to existing structures., • Perform efforts associated with sealing, painting, shimming, and preserving structures according to standard repair processes., • Read and interpret engineering drawings, technical orders, and process specifications to execute structural modification and repair., • Utilize tooling assemblies and fixtures for depot-level modification and repair of structural parts., • Troubleshoot and repair aircraft mechanical components, replacing parts as necessary., • Modify and repair aircraft sheet metal/structures and determine functionality of non-complex electrical systems., • Employ aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes, and sheers., • Access aircraft data via computer systems and initiate online parts and discrepancy requests., • Maintain necessary certifications, licenses, and permits required for assigned work., • Ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds., • Ensure the working environment is safe for access and job task performance using Hazardous Energy and Lock Out/Tag systems., • Collaborate with other team members to meet cost and schedule targets., • Obtain a U.S. Security Clearance, requiring U.S. Citizenship, with an interim and/or final U.S. Secret Clearance post-start., • Pass an assessment at the end of the training cycle., • 4+ years of experience working with non-porous metals such as aluminum, titanium, and stainless steel., • 4+ years of experience with schematics, specifications, assembly drawings, and standard operating procedures., • 4+ years of experience using structures hand tools like drills, pancake adapters, counter sink cages, hole finders, and rivet guns., • 4+ years of experience with heavy structures: locating, drilling, countersinking, and fastening to aircraft., • Ability to work variable shifts, including overtime, weekends, and holidays., • Experience in aircraft heavy maintenance (C-17 or Depot Level)., • Experience working with titanium aircraft structures. Join a dynamic team and gain the opportunity to work for one of the largest Department of Defense and Commercial Aircraft companies, offering a collaborative work environment and the chance to contribute to mission-critical projects. Work Environment The role requires variable shifts based on business needs, which includes both scheduled and unscheduled overtime, as well as potential weekend and holiday work. Training, either on-the-job or formal classroom, is essential for assignment completion. Dress code is determined by the nature of the work and compliance with safety standards. Job Type & Location This is a Contract position based out of SAN ANTONIO, TX. Pay and Benefits The pay range for this position is $43.05 - $43.05/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Nov 10, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description ABOUT THE ROLE Collects samples and performs accurate quality control testing to ensure product quality. Provides verbal and/or written test results to management and production staff in a timely manner. Assists manager with customer service issues as directed. Certifies results of laboratory findings. Provides QC support on various residential and commercial projects. WHAT YOU'LL ACCOMPLISH • Demonstrates a commitment to communicating, improving and adhering to safety policies in all work environments and areas., • Ensures that all testing is conducted efficiently and consistently to ensure accurate results., • Prepare required documents with test results to be presented to production personnel and quality control management., • Maintains mix designs as required by DOT or local city/county specifications or to ensure accuracy of products used in mix., • Ensure that safety, compliance and environmental requirements are followed., • Examines laboratory samples to determine their physical properties. Uses a variety of instruments and calculations to determine conformity. Performs various tests to make certain that samples meet required standards., • Records, analyzes, certifies and prepares summaries of findings. Maintains records of test results using various databases., • Provide technical support for production., • Assist in the investigation and testing, and sampling of raw materials and finished products to help solve quality problems. WHAT WE'RE LOOKING FOR Education: High school diploma or equivalent Required Work Experience: 3-5 year Required Training/Certifications: State regulated or industry certifications, as required Travel Requirements: 5% Additional Requirements: Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment (PPE), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit test WHAT WE OFFER • Competitive salary, • Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings, • Medical, Dental, Disability and Life Insurance, • Holistic Health & Well-being programs, • Health Savings Accounts (HSAs), Flexible Spending Accounts (FSAs) for health and dependent care, • Vision and other Voluntary benefits and discounts, • Paid time off & paid holidays, • Paid Parental Leave (maternity & paternity), • Educational Assistance Program, • Dress for your day Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.]]>

Job DescriptionPower Up the Skies as an Electrical Aircraft Mechanic! Join a team where your electrical expertise keeps cutting-edge aircraft flying safely and efficiently. From wiring to systems testing, your work powers every mission. Job Title: Electrical Aircraft Mechanics-Levels I, II, & III Location: San Antonio, TX 78226 Job Type: Full-Time; Consultant (9 Months) Schedule: Monday – Friday; must be available to work variable shifts (1st, 2nd, and/or 3rd) with overtime, weekends, and holidays as needed Pay Range: 33 – 40 per hour (based on experience and role level) Power the Future of Aerospace Maintenance PDS Tech Commercial is seeking skilled Aircraft Mechanics to support critical aerospace programs in San Antonio, TX. Whether you’re starting your career in aircraft maintenance or bring decades of avionics expertise, we have multiple openings that match your skills and career goals. As part of our team, you’ll work hands-on with advanced aircraft systems—performing electrical modifications, troubleshooting, and repairs that ensure mission readiness. What You’ll Do Depending on skill level and assignment, responsibilities may include: * Perform electrical modifications to wiring and system components on and off aircraft. * Complete connector terminations (shielded wires, coaxial cables, fiber optic wiring). * Route, seal, wrap, bond, tie, and close wire harnesses and cables per process standards. * Read and interpret engineering drawings, technical orders, and retrofit specifications. * Troubleshoot and repair electrical, avionics, and environmental systems at organizational and depot levels. * Conduct operational testing, system check-outs, and quality inspections. * Support team operations in production, maintenance, and modification programs. * Safely operate tools, equipment, and powered elevating platforms while adhering to Hazardous Energy/Lock Out–Tag Out procedures. * Collaborate with General, Structures, and Avionics mechanics to meet program milestones. What You’ll Bring Entry-Level / Intermediate Roles (33 – 35/hr): * 1+ years of aircraft maintenance, mechanical, or electrical experience. * Familiarity with electrical/electronic theories and systems. * Ability to follow engineering drawings, work instructions, and schematics. Experienced Roles (35 – 40/hr): * 4–10+ years of aircraft electrical/avionics maintenance and troubleshooting experience. * Proficiency in complex connector terminations, wiring installations, and system testing. * Experience working on depot-level or aircraft modification programs. * Ability to mentor junior mechanics and lead process improvements. All Roles Require: * Ability to climb ladders, work in confined spaces, lift up to 35 lbs., and pass vision/color-perception testing. * Flexibility to work variable shifts, overtime, weekends, and holidays. * This position requires use of information or access to facilities subject to the International Traffic in Arms Regulations (ITAR) and/or Export Administration Regulations (EAR). These regulations may limit access of controlled technologies: 1) to U.S. Persons, including U.S. Citizens, lawful permanent residents, and other narrow categories including refugees and asylees, or 2) to certain foreign nationals that have received an export license. * For senior-level roles: Must be eligible to obtain a Security Clearance. Preferred: * Avionics or FAA A&P certifications. * Experience with hazardous material handling. * Ability to operate forklifts, cranes, or powered elevating equipment. Why Join Us At PDS Tech Commercial, you’ll do more than maintain aircraft—you’ll help keep missions flying safely. Joining our team means: * Competitive Pay: 33–40/hr plus overtime opportunities. * Growth Potential: Gain experience across production, maintenance, and executive fleet programs. * Hands-On Impact: Work directly on advanced aircraft systems that support vital operations. * Team Culture: Collaborate with aerospace professionals dedicated to precision, safety, and mission success. Ready to Take Flight? Bring your skills, drive, and dedication to a role where your work truly matters. Apply today with PDS Tech Commercial to join our Aircraft Mechanic team in San Antonio, TX—and help power the future of flight. Pay Details: 33.00 to 35.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionSince 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements. PDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial. We offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan. Now part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.Since 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements.\r\n\r\nPDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial.\r\n\r\nWe offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan.\r\n\r\nNow part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.

Job Description General Description: Under the direct supervision of a laboratory technologist, the team Lead, or the supervisor in the cytogenetics and FISH department, the scientist technician will perform responsibilities associated with processing specimens for clinical testing, either manual or automated techniques, and will provide general support for the laboratory, following established policies and procedures. This is the entry level for the Laboratory Technician job category. The technician works in a learning capacity while performing a range of assignments under close supervision. * Knowledge Skills and Abilities Knowledge of professional medical technology/clinical laboratory science principles, practices, and concepts Knowledge of laboratory quality control procedures and principles of performance improvement. Knowledge of laboratory equipment and ability to maintain. Ability to communicate, consult, and interact with other members of the team. * Functions: The technician rotates under supervision in any of the above-mentioned work assignments. Additionally, work off-hour shifts, weekends, based on department/company needs. The duties and responsibilities of the associates include but are not limited to the following: Performs a broad range of laboratory procedures, including receiving, processing, and testing of clinical specimens accurately in the clinical Cytogenetics laboratory. Demonstrate the ability to identify, evaluate, and solve problems, or elevate the license personnel appropriately. Reports problems concerning individual tasks, equipment, and supplies to the Laboratory Supervisor or the Lead Technologist to ensure timely resolution. Maintains and documents the optimal functioning of laboratory equipment. Performs and documents quality control activities. Adheres to practices and regulations governing biosafety and biosecurity in the workplace. Maintain the laboratory in a clean, functional state, as well as cleaning or performing / scheduling equipment and instrument maintenance as required. Ability to work independently. Ability to work in a fast-paced, multi-tasking environment and maintain production and quality standards. Ability to work in a biohazard environment and comply with safety policies and standards outlined in the Safety Manual. Ability to lift up to 50 pounds. Organizes work and sets priorities to meet deadlines. * Supervisory Controls: CorePath clinical laboratory scientist or supervisor outlines assignment parameters, deadlines, and priorities and provides advice on how to proceed when unusual problems are encountered. The technician plans and carries out the procedures necessary to complete the work assignment and handles problems and corrects errors in accordance with established protocols or accepted laboratory practices. The supervisor or technologist reviews the work reports for the technical soundness and conformity to policy and established requirements. * Qualifications: AS or BS in biological science or related science and qualified under CLIA guidelines for high complexity testing under supervision * Customer Service: Meets the needs of customers while supporting CorePath missions. Communicates and treats customers in a courteous, tactful, and respectful manner. * Patient Care: Considers patient care when performing diagnostic testing as it related to functional capacity/limitations, ability to understand and follow directions, provide objective self-assessment of past medical condition and treatment appropriate to the overall treatment goals and plans. The hours for the position are Tuesday-Saturday, 9 AM-6 PM. Note that Saturday hours are required for this position. Company DescriptionWe are a growing private pathology practice seeking the right professional to join our team.We are a growing private pathology practice seeking the right professional to join our team.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock’s dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation’s most dependable microgrids — all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you’ll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of San Antonio, Texas and will report directly to the Manager of Automation & Controls Engineering. You’ll make an impact by: System Integration & Commissioning • Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines., • Carrying out and validate cable schedules, control packages, and system testing protocols., • Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met., • Tracking and closing punch list items by documenting deficiencies and assisting with resolution., • Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices)., • Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures., • Communicating progress and technical findings with project management and integration teams., • Using tracking tools to update key milestones, risks, and solutions., • Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements., • Have strong analytical and have problem-solving abilities in automation and control systems., • Are collaborative and effective working style with team members and contractors., • Are proactive, self-motivated, and eager to take ownership of tasks., • Are flexibile and able to adapt to shifting project requirements and deadlines., • Have hands-on background in technical fields related to power generation, electrical construction, and commissioning., • Are committed to safety, reliability, and operational excellenceRequirements: What you’ll need: • 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls., • Associate’s degree (desired) in electrical, automation, or related technical discipline., • Knowledge of microgrid operations, system integration, and applicable codes/standards., • Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC, • Experience working across multiple stages of project execution., • Medical, Dental, Vision, and Prescription Drug Insurance, • Company-Paid Life Insurance, • Flexible Spending Account (FSA), • Health Savings Account (HSA), • Wellness Programs and Incentives, • 401(k) Retirement Plan & Company Match, • Paid Time Off – Sick & Vacation Time The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

Job Description Job Title: ABD & OBGYN SONOGRAPHY INSTRUCTOR Sign on Bonus: $5k Summary: An instructor facilitates meaningful learning of the course competencies in the curriculum and proactively supports all facets of the learning environment. S/He provides education through excellence in learning-centered instruction that will enable graduates to fulfill the evolving needs of the marketplace. S/He encourages a culture of learning that values mutual responsibility and respect, life-long learning and ethics as well as personal and professional development. Incumbent must assure that the College of Health Care Professions (CHCP) philosophy: quality services to clients; development, growth, involvement, and recognition of employees; sound economic principles; and environment which is conducive to innovation, positive thinking and expansion - is considered in carrying out the duties and responsibilities of this position. Key Job Elements: Instructor • Provides competency-based education which aligns with the CHCP model of curricula as well as supports the CHCP style of system delivery., • Designs and delivers excellence of class instruction through the development of instructional plans to meet course competencies, the development of activities which support lesson objectives, and delivers the instruction as approved., • Enables the achievement of pre-described exit competencies for student achievement and evaluation of learning by providing instruction which fosters competencies and establishes student performance criteria and evaluation., • Delivers excellence in learning-centered instruction by establishing a classroom environment conducive to learning and student involvement as well as effectively planning and preparing for classes and student success., • Provides weekly feedback to students, taking special care to provide comprehensive feedback at the conclusion of the mid-term mark, providing struggling students with opportunities to improve., • Promotes student success by showing flexibility in style and work schedule as well as exhibiting a passion for teaching and students and engaging students in the learning process., • Manages the learning environment through keeping accurate records, taking attendance, submitting grades and other reports on time, and enforcing school/campus academic and attendance policies., • Attends a majority of general faculty, departmental, and school-wide meetings., • Contributes service to the campus by actively participating on at least one special project committee each year., • Relates professional/life/industry experience to learning by the continuation of professional/technical skills development, the introduction of industry perspective into courses, and the active awareness of professional/industry trends and opportunities., • nswers questions related to program content that may impact curriculum and delivery of objectives for courses. Also attends Program Advisory Committee meetings one a year to the program for which the expertise is appropriate., • Ability to communicate abstract and concrete concepts to individuals in both written and oral form., • Ability to quickly establish rapport with students and to maintain positive relationships with students, continuing seeking to promote and provide opportunities for student success., • Ability to adapt classroom management style and communication style to engage various personalities inside and outside the classroom environment., • Able to prepare lesson plans, syllabi, tests, worksheets and other teaching materials with minimal supervision, seeking to provide multiple opportunities for student engagement and success., • Must be willing to work long hours, including morning, evening, and afternoon course shifts when applicable providing specialty program tutoring and review for testing/certification (e.g. DMS)., • Must be comfortable with various computer software programs, including presentation and word processing software and email., • Must be comfortable utilizing technology in the classroom, including computers, and projectors, always seeking to use technology to enhance the student experience in the classroom., • Must be able to familiarize self with new technology and approaches as opportunities present themselves. Education/Experience: • At a minimum an Associate’s Degree, • RDMS, ABD, OB/GYN - Required, • Appropriate credential(s) specific to the concentrations offered, • Proficiency in teaching methodology, supervision, instruction, evaluation, and guidance, • The equivalent of three years full-time professional experience as a general Sonographer, cardiac Sonographer, pediatric cardiac Sonographer and /or vascular technologist. Full-time is defined as 35 hours per week