Applications engineer jobs in BedfordCrear alertas

Job Description – Field Service Engineer - Bedford / Luton (Surrounding areas) Are you looking for a new challenge and want to embark on a new journey? Then look no further! At Stern Energy we have an opportunity for a Field Service Engineer in Bedford. This position has come at an exciting time for our fast-growing company. Your location: Bedford/Luton The right candidate shall have experience in the electrical installation and maintenance of industrial sites and specific knowledge of DC electrical systems. You will have previous experience or technical knowledge of photovoltaic systems and high-voltage systems. Good ability and confidence on using basic electrical equipment such as multimeters and insulation testers is required. Who are we? Stern Energy operates ground-mounted photovoltaic systems for over 769 MW in the UK. We are among the largest operators in Europe, with activities in 5 countries and over 2.8 GW under management. We are specialised in proposing and executing revamping and repowering projects to enhance the performance of the assets we operate. How do we work? EXPERTISE, RESPONSE, TRANSPARENCY AND PASSION: our values guide our work. Our professional commitment is to translate the expertise gained into maximum plant efficiency and maintenance of long-term performance. We provide an integrated, timely and effective service based on a "Total Quality" approach of experience, know-how and nationwide services. We continually invest in equipment and technology to refine our procedures and operating methods; we provide our services through internal staff to ensure autonomy and maximum responsiveness. Transparency is key to our work so that our customers can rely on constant control of the plants and the quality of services provided. Customer relations is our passion to building a lasting relationship of trust. We have a dedicated internal team of specifically qualified, multi-disciplined engineers boasting significant expertise, all of whom are solution providers. Main responsibilities • Visual inspection activities, cleaning and reporting to the management team., • Routine maintenance activities on modules, inverters, cables and connectors, and DC and AC distribution boxes., • Routine maintenance activities on module mounting systems, fences and gates, and inverter and transformer stations (excluding equipment)., • Routine maintenance activities on monitoring and communication equipment (data loggers, routers, sensors, etc.)., • Routine maintenance activities on security system devices (cameras, barriers, etc.)., • Fault finding on electrical components by means of visual inspections or professional site measurement activities (thermal imaging, insulation tester, etc.)., • Execute corrective measures to keep the system available., • Engage and manage subcontractors., • Called to perform reactive and corrective maintenance activities as well as, from time to time, to manage subcontractors and control the quality of activities performed., • The site technician shall give availability for working from time to time during weekends and bank holidays. Skills and qualifications • Minimum of 3-5 years’ experience in electrical installation and maintenance, preferably in industrial or utility-scale environments., • Proven experience or technical knowledge of photovoltaic (PV) systems., • Strong knowledge of health and safety regulations and best practices., • Proficiency in using electrical testing tools, • Good working knowledge of Microsoft Office applications, • Ability to work independently and manage time effectively, • Strong communication skills, • Problem-solving mindset, • Team player, • Professionalism, • Valid and clean car driving licence., • NVQ Level 3 electrical certification. A great benefit package to include: • Employee Assistance Programme, • Pension scheme, • Bonus scheme, • Company sick pay, • Inflation support scheme, • Team-building days, • Great company culture and regular social events, • Wellness Wednesday for 30 minutes every week for mindfulness on top of lunch break, • Extensive learning and development programme, • Regular wellbeing check-ins, • Company mobile phone, • Laptop, • 25 days of annual leave plus Bank holidays, • TOIL mechanism – built up for hours worked in the week which can be used in the form of TOIL or accumulated and paid at the end of the financial year., • Hours worked for call-outs to be paid at the end of each month., • standby call-out payments, • Vehicle with fuel cards At Stern Energy, we are deeply committed to promoting equity and inclusion, and we celebrate the diversity of our team—both those who are with us today and those who will join us in the future. We encourage applications from individuals of all backgrounds, regardless of gender, gender identity, national origin, religion, social, cultural, or ethnic background, sex, sexual orientation, age, disability, pregnancy, veteran status, or any other characteristic protected by law. Our hiring decisions are based solely on business needs, job requirements, and qualifications. We strive to be an equal opportunity employer, fostering an inclusive environment where everyone is respected and free from discrimination or harassment.

The Technical Product Support Engineer will provide technical guidance, support and product knowledge to the Internal Sales team. An opportunity has arisen for a Technical Product Support Engineer, to join a leading producer of automation and control software products for industrial applications, ba

Summary of the Senior Applications Engineer role . Requirements for a successful Senior Applications Engineer.

Drive growth as an Automotive Technical Account Manager, combining technical expertise and sales skills to support OEM and Tier suppliers with high-performance sealing solutions. Automotive Technical Account Manager Home based with UK and overseas travel required * Full time, permanent position * £55,000 - £70,000 depending on experience Please Note: Applicants must be authorised to work in the UK Our client is a leading provider of advanced sealing solutions, supplying high-quality, precision products to industries including Automotive, Defence, Oil & Gas, Renewables and Medical. They work closely with customers to deliver sealing solutions that meet the most demanding performance, validation and quality standards. The Role As an Automotive Technical Account Manager, you will play a key role in driving sales growth within the automotive sector while also managing selected non-automotive accounts. Key Responsibilities: * Identify, target and secure new business opportunities primarily within the automotive sector * Develop and deliver strategic sales plans to achieve revenue and growth targets * Manage the full sales cycle, from lead generation through to contract negotiation and closure * Provide technical consultation to customers on sealing products, materials and applications * Support customers through design, validation, testing and production phases * Deliver technical presentations and product demonstrations * Build and maintain strong relationships with key OEM and Tier 1/2 accounts * Conduct regular customer visits to understand requirements and identify upselling opportunities * Monitor market trends, competitor activity and customer feedback * Contribute to product development strategy based on market and customer insight * Prepare sales forecasts, reports and analysis for senior management * Maintain accurate CRM records and ensure compliance with quality and regulatory standards Benefits They offer a supportive and professional working environment where expertise is valued, and continuous development is encouraged. In return for your commitment, you can expect: * Competitive salary package with performance-related bonus * Company car * Private medical insurance * Company support for travel and customer engagement * Opportunity to work with innovative, high-performance products * Exposure to major automotive OEMs and Tier 1 suppliers * Long-term career development within a growing, technically focused business The Ideal Candidate You will be a commercially driven technical sales professional with a strong background in automotive or engineered products. About you: * HNC or equivalent qualification in Engineering, Mechanical Engineering or a related discipline or served time in industry * Proven experience in technical sales, ideally within sealing solutions or a related engineering sector * Strong technical knowledge of sealing technologies, materials and applications * Experience working with automotive OEMs and Tier 1/2 suppliers * Excellent communication, negotiation and presentation skills * A proactive, self-motivated approach with a strong drive to achieve sales targets * The ability to build long-term customer relationships at multiple levels * Willingness to travel regularly to customer sites How to apply for the role: If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. NO AGENCIES PLEASE Other suitable skills and experience include Technical Sales Engineer, Automotive Account Manager, Business Development Manager (Engineering), OEM Account Manager, Field Sales Engineer, Key Account Manager (Automotive), Applications Engineer, Commercial Engineer, Sales Engineer – Automotive, Technical Business Development Manager

Software Engineer - Milton Keynes About The Role SALARY: From £41,567 pa dependent on experience LOCATION: Milton Keynes HYBRID WORKING: Our current hybrid working policy requires a minimum of 60% of working time to be based in the Milton Keynes office however flexibility is expected to meet the needs of the business and the role. HOURS / CONTRACT TYPE: Full time, permanent CLOSING DATE: 11/02/26 We reserve the right to close the advert earlier If we receive a high volume of applications. We are looking for an experienced C# Software Engineer to join the team and support us on our journey in transforming our application landscape to provide a modern, cloud hosted finance platform. This exciting opportunity offers the chance for you to work for a fantastic brand and to help shape our digital future. About the role As a key part of the scrum team, you will help to reshape the company’s core products, working on green and brownfield solutions using the latest technologies. You will play an important role in the product lifecycle, contributing to design, from development through to delivery. Experience you will bring to this role: We are looking for a good communicator and strong team player with skills aligned to our tech stack. We would expect you to have strong experience in most of the following: Tech Stack C# .Net Core Typescript React Web API Kubernetes / Docker AWS / Azure GIT SQL / NoSQL Working Principles REST SOLID TDD Agile / SCRUM CI / CD DevOps What’s in it for you? Bonus: Discretionary 10% on-target bonus (based on personal and Group company performance) Pension: Employer pension contribution of 9% (based on employee contribution of 3%). VWFS will pay 6% if employee chooses a 2% employee contribution. Car schemes*: Choice of Employee Car Ownership (ECO) scheme for petrol/diesel and hybrid vehicles plus car insurance OR Company Car scheme for Battery Electric Vehicles (BEVs) plus car insurance cover for you and a partner/eligible family member. Other benefits: From day 1 we provide income protection, life assurance (4x salary), retail discount vouchers , access to Care Concierge (a service to support carers of adults), along with other salary sacrifice options including a will writing service and cycle to work (subject to scheme restrictions). Following successful completion of probation, you will have access to private medical insurance for you (with the option to buy additional family cover), access to our loan car scheme for up to 2 cars for your partner or eligible family members (subject to scheme restrictions) and during our annual benefit window you can purchase critical illness cover and dental cover , so you can select the benefits that matter to you. We invest in our people and are passionate about driving development. You’ll have access to LinkedIn Learning via our Degreed platform as well as a host of professional development programmes and opportunities to build your technical and soft skills so you can further develop your career. We also offer mentoring schemes and reciprocal partnerships recognising that we can all learn from each other in the flow of work. About You About Us Why join VWFS UK? You’ll have the opportunity to make a difference by helping us to achieve our mission. Our mission is straight forward; we want to be The Key to Mobility. That means we make getting from A-to-B as easy and simple for as many people as possible. To truly meet the mobility needs of people in a changing world, our offering goes beyond traditional vehicle financing. We do this by providing a range of finance and aftersales products on Volkswagen Group vehicles, as well as developing innovative mobility products designed to solve real problems and support our customers. No candidate will meet every single desired qualification. If your experience looks a little different from what weve identified and you think you can bring value to the role, wed love to learn more about you! VWFS is proud to be an inclusive employer and encourages applications from a diverse range of candidates. Diversity, Equity & Inclusion isn’t just a statement for us, we encourage and aspire for all our colleagues to be their 100% self. If you need any reasonable adjustments to assist you with the application and/or recruitment processes, please contact our Resourcing Team.

Are you a credible Sales Executive, Technical Sales, Sales Engineer who's not afraid to pick up the phone and speak to people? This role has business development, account management & project management - based in Corby - with great prospects to grow into a home based, field sales role within 18 to 24 months after extensive product and sales training. Working for the UK sales & service office of a major European manufacturer of packaging machinery selling to the pharmaceutical and food manufacturing markets. BASIC SALARY: Up to £45,000 BENEFITS: · Good holiday package rising with service (including Christmas shutdown) · Commission on new machine sales. · Access to full company benefits package including pension. LOCATION: Corby - office based for the first two years so you must be commutable to Corby. COMMUTABLE LOCATIONS: Kettering, Northampton, Burton Latimer, Wellingborough, Rushden, Thrapston, Oundle, Peterborough, Stamford, Oakham, Leicester, Market Harborough, Lutterworth, Bedford, Rugby, Huntingdon. JOB DESCRIPTION: Sales Executive, Technical Sales, Sales Engineer, Internal Sales, Project Manager Based at our site in Corby, this role is a mix of Projects, Sales and Account Management. Working with and shadowing the Sales Manager, you will develop your skills whilst learning our niche sector and customers. This role will give you opportunities to meet with clients across the UK and Ireland, whilst also receiving world class product training at the manufacturing headquarters in Italy. KEY RESPONSIBILITIES: Sales Executive, Technical Sales, Sales Engineer, Internal Sales, Project Manager · Projects: Working as a hub between customers, suppliers and internal contacts to keep everyone informed as to the progress of the manufacture, installation and commissioning of their capital equipment projects · Sales: Following up on enquiries, contacting current and lapsed clients, with a focus on proactive business generation - prospecting and canvassing companies across pharmaceutical, food, general industrial to book meetings through our database, self-generated leads, contacts at exhibitions and marketing etc. · Account Management: Working with a broad and long standing account base to check they're happy with current projects and establish time lines for future needs. Booking and attending meetings (across the UK and Ireland) to discuss those requirements. PERSON SPECIFICATION: Sales Executive, Technical Sales, Sales Engineer, Internal Sales, Project Manager · You've got some kind of technical, engineering, mechanical mindset. This could be from school, work experience or hobbies. Either way, you're not intimidated by mechanical engineering principals. · You're good with customers and can be credible. We sell by providing high quality products and offering strong consultancy to our clients. · You want to build a career in sales management, project management. Working closely with our Sales Manager - this is an opportunity to learn a niche industry from an expert - selling high quality, internationally renowned equipment to high profile customers. · Previous experience of either internal sales or project management or both working for a technical or engineering company would be advantageous. THE COMPANY: We are the sole UK subsidiary for a large Italian manufacturer of capital equipment selling to the pharmaceutical, food, general industrial manufacturing sectors. Based in Corby, we have a strong reputation throughout the UK and Ireland as experts in our field. PROSPECTS: This role is intended to evolve into a full Sales Manager position in the next 12 to 18 months after full product training at their Head office in Europe and on the job sales training and mentoring in the UK. Working closely and being guided / mentored by our existing Sales Manager will set you up with an excellent career path within our well-paid and high-margin sector. It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Technical Sales / Mechanical Sales Engineer / Sales Engineer, Sales Executive, New Business Sales, Business Development Sales, Sales Manager, Project Engineer, Project Manager, Project Executive, Account Manager, Account Executive, Mechanical Engineer, Service Engineer, Technical Sales, Technical Account Manager, Industrial Capital Equipment INTERESTED? Please click apply. You will receive an acknowledgment of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18249, Wallace Hind Selection

Senior Design Engineer We are working with a global leader who have been established for 50 years and specialise in design, manufacture and supply for industrial applications. We are currently recruiting for an experienced Senior Design Engineer to join the team in Bedford. Key requirements for the Design Engineer: • Must have over 8 years working experience as a Mechanical Design Engineer, • A minimum of 8 years in industrial mechanical design experience is required, • Experience of using a 3D CAD package is required, • Must have an excellent background in Engineering / Manufacturing, • Ideally Apprentice trained or HNC is minimum requirement for the role, • Any experience of rotating machinery or special purpose machinery will be a distinct benefit, • Registered Incorporated Engineer (IEng) not essential but preferred, • Ability to work flexibly to achieve tight deadlines and targets, • A dynamic team player with positive attitude and a self starter is required The successful Senior Design Engineer will be required to work within an ISO 9001 environment and carry out all aspects of design for manufacture of the company's mechanical products. In return my client are offering an excellent salary, a clear career path and other benefits TBC. Please send your CV to Zabina @ Quest Technical for immediate consideration

Service Engineer (Industrial/Manufacturing/Waste) £42,000 - £44,000 + OTE 59K + Van + Door to Door Pay + Flexi-time Bedford Are you a Service Engineer from a waste, industrial, manufacturing or similar background looking to join a rapidly expanding company at the pinnacle of their industry, offering door to door pay and ample overtime to maximise your weekly earnings? In this role you will be covering a local patch between Northampton, Oxford, Luton and Cambridge, where you will repair, service and commission waste and recycling machinery such as balers, compactors and shredders. You will be given on-the-job training by industry experts, then work autonomously, travelling between customer sites, with a wealth of overtime available. Founded 30 years ago, this company supply waste machinery and pride themselves on their high quality of work, as well as their customer and employee satisfaction. They primarily supply into the distribution, manufacturing, retail and waste management industries, offering plenty of work and stability. This role would suit somebody who is a Service Engineer from an industrial, manufacturing, waste or similar background, looking for ample overtime, within a nationally renowned waste company. The Role: Repairing, servicing, maintaining and commissioning waste machinery Full product training on balers, compactors and shredders Covering a local patch between Northampton, Oxford, Luton and Cambridge Monday to Friday, 40 hours a week, plenty of overtime paid at 1.5xThe Person: Service Engineer Industrial, manufacturing, waste or similar backgroundReference number BBBH23290a Engineer, Engineering, Servicing, Repairing, Commissioning, Mechanical, Hydraulics, Waste, Field, Local, Electric, Electrical, Industrial, Manufacturing, Machinery, Bedford, Northampton, Luton, Oxford, Cambridge If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Service Engineer (Pumps/ Hydraulics) £45,000 - £50,000 + OTE 67K + Van + Door to Door Pay + Flexi-time Bedford Are you a Service Engineer from a pumps, hydraulics or similar background looking for tailored, bespoke training on state-of-the-art processing machinery, where you will cover a local patch, offering door to door pay and plenty of overtime to maximise your weekly earnings? In this role you will be covering a local patch between Northampton, Oxford, Luton and Cambridge, where you will repair, service and commission waste and recycling machinery such as balers, compactors and shredders. You will be given on-the-job training by industry experts, then work autonomously, travelling between customer sites, with a wealth of overtime available. Founded 30 years ago, this company supply waste machinery and pride themselves on their high quality of work, as well as their customer and employee satisfaction. They primarily supply into the distribution, manufacturing, retail and waste management industries, offering plenty of work and stability. This role would suit somebody who is a Service Engineer from a pumps, hydraulics or similar background, looking for elite training and ample overtime, within a nationally renowned waste company. The Role: Repairing, servicing, maintaining and commissioning waste machinery Full product training on balers, compactors and shredders Covering a local patch between Northampton, Oxford, Luton and Cambridge Monday to Friday, 40 hours a week, plenty of overtime paid at 1.5x The Person: Service Engineer Hydraulics, pumps or similar background Reference number BBBH23290e Engineer, Engineering, Servicing, Repairing, Commissioning, Mechanical, Hydraulics, Waste, Field, Local, Electric, Electrical, Industrial, Manufacturing, Machinery, Bedford, Northampton, Luton, Oxford, Cambridge If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website TPBN1_UKTJ

Trainee AI Engineer – No Experience Needed Future-proof your career in Artificial Intelligence – starting today. Looking for a career change? Currently employed but want something better? Or maybe you're between jobs and ready for a fresh start? ITOL Recruit's AI Traineeship is designed to get you into one of the fastest-growing industries with zero experience required. Train online at your own pace and land your first AI Engineer role in 1-3 months. Please note this is a training course and fees apply Job guaranteed - complete the programme and get a job or get your money back. Our candidates earn £30,000-£45,000. Why AI? AI is reshaping every industry you can think of. Healthcare, finance, retail, and manufacturing – they’re all scrambling for skilled professionals. The demand far outstrips supply, which means excellent salaries, flexible working arrangements, and genuine job security. How It Works Step 1 – AI Engineering Fundamentals Start with the basics of AI, including neural networks and large language models, to build a solid foundation in AI engineering. Step 2 – Data Fundamentals Understand the data workflow, from collection to cleaning, and learn how to prepare data for AI applications. Step 3 – Notebooks & IDEs Get hands-on with industry-standard tools like Jupyter Notebooks and VS Code to develop AI systems. Step 4 – Python Programming Master Python, covering everything from the basics to object-oriented programming (OOP). Step 5 – Python Streamlit Project Apply your Python skills by building a car price prediction app using Python and Streamlit. Step 6 – Python for Data Learn essential Python libraries like NumPy, Pandas, and Matplotlib for data manipulation and visualisation. Step 7 – AI Sentiment Analysis Project Work with Hugging Face to build a sentiment analysis classifier using real-world AI techniques. Step 8 – AI Prompt Engineering Master prompt engineering, learning how to craft effective prompts for controlling AI outputs. Step 9 – Retrieval-Augmented Generation (RAG) Learn how to integrate external knowledge into AI systems using RAG techniques and vector databases. Step 10 – AI Specialised Customer Service Chatbot Project Combine prompt engineering and RAG to build an AI-powered customer service chatbot, delivering intelligent responses using vector databases and knowledge bases. Step 11 – Machine Learning Fundamentals Understand machine learning principles and algorithms, and how to train and test models using scikit-learn. Step 12 – Machine Learning Project Put your machine learning knowledge into practice with a hands-on project. Step 13 – AI & Data Ethics Study the ethical considerations in AI, including issues of bias, fairness, and data privacy. Step 14 – Oral Exam Complete a virtual oral exam to assess your understanding and ability to apply your learning. Step 15 – AWS Certified Cloud Practitioner Finish with the AWS Certified Cloud Practitioner course and exam to gain essential cloud computing knowledge. What You Get · 100% online, self-paced training · Microsoft AI-900 certification included · 1-to-1 tutor and recruitment support · Real-world project experience · Job guarantee – get a job or your money back · Starting salary of £30,000–£45,000 We Get You Hired! We're not new to this. ITOL Recruit has 15+ years of experience and has placed over 5,000 people into new roles. Our job programmes include certified tutors, UK-accredited qualifications, and one-on-one support from a recruitment adviser focused on placing you. We don't believe in empty promises. Complete our programme, follow the process, and if you don't land a job, you get your money back. "Five months from complete beginner to AI engineer. Best decision I ever made." – Jamie W., now working as a Junior AI Engineer in London Ready to Start? If you’re motivated, curious, and excited about technology, we’ll help you turn that into a career you can be proud of. Apply now, and one of our expert Career Advisors will be in touch within 4 working hours to guide you through your next steps

Join one of Bedford's largest contractors and start with a company van, fuel card, and all essential tools from day one. As a Plumber, you'll work across well maintained domestic properties, becoming part of a reliable team with consistent work and excellent long - term career prospects. This opportunity is with a respected and established building contractor in the area, known for its strong reputation in the housing sector and commitment to its workforce. You'll be part of a company that values high - quality work and supports ongoing growth in a stable, full-time environment I'd be keen to see applications from anyone with experience in general building trades, whether you've previously worked as a Bathroom Fitter, Plumbing Engineer, or Multi Skilled Operative with a strong plumbing background. As a Plumber you will be: Carrying out day-to-day plumbing repairs in occupied and void properties Completing reactive maintenance tasks including leaks, taps, toilets, and pipework Undertaking planned maintenance work as required Diagnosing and resolving faults efficiently Delivering a high standard of customer service within domestic settings I'd love to speak to Plumber who has: A full UK driving licence Proven experience in domestic maintenance with a plumbing focus Experience working within social housing or similar environments The ability to work independently and manage daily workloads This Plumber role is offering the following benefits: Permanent employment from the start Company van and fuel card provided Power tools supplied for daily use Attractive annual leave package Overtime available Location & travel The role is offering a salary of £36,000 per year. Location & travel Based in Bedford, the role includes a company vehicle, making site travel easy. Bedford's central location offers excellent road links, including the M1, A1 and A421, providing quick access across the East Midlands. If this Plumber role sounds like something you'd be interested in, apply now, or call R'mone on (phone number removed)

Control Systems Engineer Are you passionate about automation and control systems? Join a dynamic, innovative company specialising in high-speed machinery and international projects. They design and deliver custom-built solutions for leading industries worldwide. About the Company Orion is working with an organisation that is a forward-thinking engineering firm with a global presence, dedicated to delivering high-quality automation solutions. Their team supports projects from concept through to installation and commissioning, working closely with clients across various sectors to optimise their manufacturing processes. Responsibilities of the Control Systems Engineer Develop and program control systems for specialised machinery. Conduct design studies, reviews, and prepare specifications for unique applications. Complete Factory Acceptance Test (FAT) documentation. Support engineering queries and resolve manufacturing quality issues. Perform installation, commissioning, and troubleshooting at customer sites worldwide. Travel internationally approximately 4-5 times per year for project support and site visits. Requirements of the Control Systems Engineer Proficiency in PLC programming (Siemens S7, Rockwell ControlLogix). Knowledge of motion control and servo drive applications. Experience with safety PLC design and implementation. Familiarity with languages such as Python, C, or JavaScript is advantageous. Experience working with vision systems and FAT protocol commissioning. Benefits for the Control Systems Engineer Competitive salary with discretionary bonus. Overtime pay for work at customer sites. 25 days holiday plus bank holidays. Company life insurance (6x salary). If this Control Systems Engineer position is of interest, please click Apply or get in touch with Steven at Orion. INDKA

An established engineering and manufacturing group is looking to recruit a Design Engineer to join a growing CAD and automation team. This is a key role supporting the development, automation, and testing of specialist engineered products across multiple UK operations. The position offers a strong mix of hands-on design, automation development, and product innovation, with exposure to advanced and regulated product environments. The Role Act as a core member of the CAD team, maintaining and expanding automated drawing systems Design and develop new products, prototypes, and test solutions Produce and manage drawings using AutoDesk Inventor and AutoCAD Support automation development using iLogic and in-house systems Collaborate with sales, design, and production teams to deliver certified products Contribute to value engineering and continuous product improvement Support testing handovers including documentation and pricing information Produce manufacturing drawings when required Assist the Design & Technical Manager with ad-hoc technical tasks Occasional UK travel; flexibility with working hours required to meet business needs Essential Skills & Experience Strong working knowledge of AutoDesk Inventor Working knowledge of AutoCAD Experience with iLogic and automated design systems High level of IT literacy, including Microsoft applications Good numeracy and literacy skills Self-motivated, reliable, and solutions-focused Strong written and verbal communication skills Ability to obtain security clearance Desirable Experience Product development and R&D experience Research or testing background Programming or automation experience Innovative, improvement-driven mindset What’s on Offer Competitive salary Long-term career development within a growing engineering group Exposure to specialist, high-value engineered products Comprehensive in-house training and ongoing development This role would suit a Design Engineer with strong CAD and automation experience looking to work on technically complex products in a collaborative, forward-thinking environment. If you are interested please click apply today

Are you a Service or Maintenance Engineer from an on-site maintenance or field service background - with experience of providing repair, maintenance, service and support of industrial equipment? We're a well established British engineering company who offer full after sales and service support to the clients of a major Italian packaging machinery manufacturer. Any experience with Siemens or Allen Bradley PLC's would be an advantage BASIC SALARY: Up to £55,000 BENEFITS: · Overtime to earn circa £10,000 (paid door to door) · Generous Car Allowance · Full company benefits package LOCATION: Covering the UK & Ireland 70%, but factory based in Corby 30% of the time. COMMUTABLE LOCATIONS: Corby, Peterborough, Northampton, Stamford, Leicester, Lincoln, Bedford JOB DESCRIPTION: Field Service Engineer, Mechanical Service Engineer, Maintenance Engineer - Packaging Machinery, Industrial Capital Equipment, PLC A classic Field Service Engineer role involving repair, refurbishment, upgrades, installations and commissioning of a range of Italian manufactured packaging machinery supplied to the food, pharmaceutical and other manufacturing industries. Time is split between the Corby workshop (roughly 1/3) and travelling to client sites around the UK (2/3). You'll probably stay away a couple of nights per week on scheduled maintenance, installation or commissioning projects. PERSON SPECIFICATION: Field Service Engineer, Mechanical Service Engineer, Maintenance Engineer - Packaging Machinery, Industrial Capital Equipment, PLC · You WILL be an experienced Field Service or Maintenance Engineer of industrial or special purpose machinery or capital equipment. · You MUST be a qualified Mechanical Engineer or have completed a full mechanical apprenticeship. · Any electrical engineering qualifications or experience would be a bonus. · Any exposure of fault finding on PLC's would also be a plus Exposure, or previous hands experience of packaging machinery would be an obvious advantage - ideally in the food and / or pharmaceutical sectors - but we're open on any special purpose industrial machinery experience. THE COMPANY: A small and very well established British engineering company who offer full after sales and service support to the clients of a major Italian packaging machinery manufacturer. This role is a new role to cover for future retirement. A really nice place to work and a client of mine for over 20 years! It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Field Service Engineer, Site Based Maintenance Engineer, Mechanical Engineer, Multi skilled Engineer - Industrial Capital Equipment, Special Purpose Machinery, PPMA, Automate UK, Packaging Machinery, Process Machinery, Food, Pharmaceutical, Medical, Chemical, PLC, Allen Bradley INTERESTED? Please click apply. You will receive an acknowledgement of your application. Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: SP18378, Wallace Hind Selection

My client was established in 1924 and specialises in designing and producing cutting-edge machinery used in industries such as cosmetics, food and beverage, pharmaceuticals, and personal care. As the Electrical Design Engineer, you will be responsible for carrying out electrical and pneumatic design, validation of all designs to the current safety standards and requirements, support CE certification of all equipment, carry out design studies and reviews, and prepare specifications for special applications. Additionally, you will complete the FAT document and as-built electrical documentation, support installation, troubleshooting visits at customer sites worldwide, and work with the Service and Aftercare teams. What we would like from the Electrical Design Engineer: Experience designing electrical control systems for special-purpose machinery Experience designing safety control systems and validation using appropriate software Good understanding of AutoCAD Electrical Experience in compiling BOMs and MRP uploads Knowledge of safety equipment and standards Working with end users to confirm functionality specifications and interface requirements Experienced in creating risk assessments and designing safety circuits to meet the appropriate SIL level (desirable) Motion control system design (desirable) What we offer the Electrical Design Engineer: £competitive Discretionary bonus Overtime when working away at customer premises 37-hour week (Mon-Thurs 8am-4.30pm, Friday 8am-1pm) 33 days holiday (25 days, plus 8 bank holidays) Pension contributions are 5% Company Life insurance at 6 times the salary If this opportunity as the Electrical Design Engineer is of interest to you, don't hesitate and get in touch asap! Click to apply or contact Luke Tanner at Orion Recruitment TPBN1_UKTJ

Service Engineer (Hydraulics) £42,000 - £44,000 + OTE 59K + Van + Door to Door Pay + Flexi-time Bedford Are you a Service Engineer from a hydraulics background or similar looking to cover a local patch, in a provided van, for a company at the peak of their industry, offering door to door pay and ample overtime to maximise your weekly earnings? In this role you will be covering a local patch between Northampton, Oxford, Luton and Cambridge, where you will repair, service and commission waste machinery such as balers and compactors. You will be given initial on-the-job product training, then work autonomously, travelling between customer sites, with plenty of overtime available. Founded 30 years ago, this company supply waste machinery and pride themselves on their high quality of work, as well as their customer and employee satisfaction. They primarily supply into the distribution, manufacturing, retail and waste management industries, offering plenty of work and stability. This role would suit somebody who is a Service Engineer from a hydraulics background or similar, looking for ample overtime, within a nationally renowned waste company. The Role: Repairing, servicing, maintaining and commissioning waste machinery Working on balers, compactors and similar, with training provided Covering a local patch between Northampton, Oxford, Luton and Cambridge Monday to Friday, 40 hours a week, plenty of overtime paid at 1.5xThe Person Service Engineer Hydraulics experienceReference number BBBH 23290 Engineer, Engineering, Servicing, Repairing, Commissioning, Mechanical, Hydraulics, Waste, Field, Local, Electric, Electrical, Industrial, Manufacturing, Machinery, Bedford, Northampton, Luton, Oxford, Cambridge If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website

Service Engineer (Hydraulics) £42,000 - £44,000 + OTE 59K + Van + Door to Door Pay + Flexi-time Bedford Are you a Service Engineer from a hydraulics background or similar looking to cover a local patch, in a provided van, for a company at the peak of their industry, offering door to door pay and ample overtime to maximise your weekly earnings? In this role you will be covering a local patch between Northampton, Oxford, Luton and Cambridge, where you will repair, service and commission waste machinery such as balers and compactors. You will be given initial on-the-job product training, then work autonomously, travelling between customer sites, with plenty of overtime available. Founded 30 years ago, this company supply waste machinery and pride themselves on their high quality of work, as well as their customer and employee satisfaction. They primarily supply into the distribution, manufacturing, retail and waste management industries, offering plenty of work and stability. This role would suit somebody who is a Service Engineer from a hydraulics background or similar, looking for ample overtime, within a nationally renowned waste company. The Role: Repairing, servicing, maintaining and commissioning waste machinery Working on balers, compactors and similar, with training provided Covering a local patch between Northampton, Oxford, Luton and Cambridge Monday to Friday, 40 hours a week, plenty of overtime paid at 1.5x The Person Service Engineer Hydraulics experience Reference number BBBH 23290 Engineer, Engineering, Servicing, Repairing, Commissioning, Mechanical, Hydraulics, Waste, Field, Local, Electric, Electrical, Industrial, Manufacturing, Machinery, Bedford, Northampton, Luton, Oxford, Cambridge If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

Flood Risk Engineer Location: Bedford Salary: Competitive plus benefits A great opportunity has arisen for a Flood Risk Engineer to join a growing consultancy in Bedford. You will support a diverse mix of residential and non-residential projects, helping to deliver high quality flood risk and drainage solutions from early planning stages through to detailed design. This is an ideal role for someone looking to develop quickly while working as part of a supportive and collaborative engineering team. As a Flood Risk Engineer, you will prepare flood risk assessments and drainage strategies, working closely with civil engineers, planners and external consultants. You will contribute technical input to site layouts and masterplans, ensuring that drainage and flood risk considerations are integrated into the design process. The role offers plenty of variety, client interaction and opportunities to grow your expertise. Key Responsibilities Prepare Flood Risk Assessments for planning applications. * Produce surface water and foul water drainage strategies. * Model drainage networks using MicroDrainage or Flow. * Provide drainage and flood risk advice to support masterplanning. * Liaise with clients, council officers and third party consultants. * Support multiple live projects and contribute to team coordination. About You Degree or equivalent experience in civil engineering or a related discipline. * Good understanding of UK drainage and flood risk guidance. * Proficient in MicroDrainage or Flow, AutoCAD or MicroStation and Microsoft Office. * Experience preparing drainage or flood risk reports. * Strong written, verbal and client communication skills. * Proactive, organised and able to manage changing project demands. Why Apply? You will join a friendly, employee-owned consultancy offering flexible working, profit share, pension, life assurance, healthcare, CPD support and a positive culture focused on development and work life balance. Penguin Recruitment is operating as a Recruitment Agency for this position. For more information, contact Andy Hopkins, our Civil Engineering specialist with over 30 years' recruitment experience.

Control Systems Engineer Are you passionate about automation and control systems? Join a dynamic, innovative company specialising in high-speed machinery and international projects. They design and deliver custom-built solutions for leading industries worldwide. About the Company Orion is working with an organisation that is a forward-thinking engineering firm with a global presence, dedicated to delivering high-quality automation solutions. Their team supports projects from concept through to installation and commissioning, working closely with clients across various sectors to optimise their manufacturing processes. Responsibilities of the Control Systems Engineer Develop and program control systems for specialised machinery. Conduct design studies, reviews, and prepare specifications for unique applications. Complete Factory Acceptance Test (FAT) documentation. Support engineering queries and resolve manufacturing quality issues. Perform installation, commissioning, and troubleshooting at customer sites worldwide. Travel internationally approximately 4-5 times per year for project support and site visits. Requirements of the Control Systems Engineer Proficiency in PLC programming (Siemens S7, Rockwell ControlLogix). Knowledge of motion control and servo drive applications. Experience with safety PLC design and implementation. Familiarity with languages such as Python, C, or JavaScript is advantageous. Experience working with vision systems and FAT protocol commissioning. Benefits for the Control Systems Engineer Competitive salary with discretionary bonus. Overtime pay for work at customer sites. 25 days holiday plus bank holidays. Company life insurance (6x salary). If this Control Systems Engineer position is of interest, please click Apply or get in touch with Steven at Orion. INDKA TPBN1_UKTJ

Astute's EPC Power team is partnering with a leading EPC Contractor within the UK Power Industry to recruit an Electrical Commissioning Engineer on a 6 month contract basis for their Open Cycle Gas Turbine project based in Stewartby, Bedfordshire. The Electrical Commissioning Engineer role comes with a day rate of £500.00 to £525.00 per day. Key skills and responsibilities: Work closely with the Electrical Lead Commissioning Engineer and the Commissioning team to successfully commission the electrical scope of works to completion. Hands-on commissioning of electrical components and systems such as, transformers, medium/low voltage switchgears LV/HV/MV, DC systems, rectifiers, inverters, motorized valves, instruments etc. Fully competent at using Primary & Secondary Injection test set equipment. Carrying out testing on electrical systems and equipment, as well as system optimization and troubleshooting and filling-in the respective commissioning documentation and protocols Cooperation with internal team members, guidance and coordination of external partners and sub-contractors, interacting with customers. Work closely with LV/MV/HV electrical engineers, electrical supervisors, technicians, etc. Participate in the Plan of the Day meeting daily providing resourceful inputs on the work progress. Ensure all the activities conducted on site follow the correct process in accordance with project requirements and in strict compliance with all EHS requirements. Coordination of all necessary activities with all involved parties, such as commissioning team, erection team and sub-contractors Participation in the walk-downs for Turnover from construction to commissioning, identifying open items that prevent system start-up. Preparation and update of the commissioning procedures to be conducted on site. Report to the Deputy Commissioning Manager and the Commissioning Manager Provide theoretical and practical training to customer personnel. At least 7 years working experience in power stations Electrical (MV/LV and I&C) Commissioning activities with demonstrable experience in a leading role in projects of similar relevance. BEng /HND in Electrical engineering desirable Strong team spirit, working with an international team and other cultures. Excellent communication skills Ideally have Waste to Energy project experience, however, renewable energy, petrochemical, pharmaceutical, and sub-station experience would be fine. Location, remuneration and timeframe of the Electrical Commissioning Engineer role Stewartby, Bedfordshire £500.00 to £525.00 per day - Outside IR35 February 2026 INDPOWAstute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government's Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful

Service Engineer £40,000 - £45,000 + Specialist Training + Excellent Benefits Bedford, Bedfordshire (Ideally located: Milton Keynes, Northampton, Biggleswade, Leighton Buzzard, Luton) Are you a mechanically skilled engineer, looking to join a globally renowned company who will provide you with specialist on the job training and a long-term stable role? On offer is an excellent opportunity to work in a highly varied workshop / field position, with a manufacturer who are renowned for looking at their staff and supporting their development. This is a unique chance to work for a well-established company that work alongside blue-chip clients globally. As a result of continued year on year growth, this leading company are looking for someone to join their highly skilled team to meet their growing demands. In this varied role, you'll divide your time between the Bedford workshop and travelling to client sites across the UK and overseas. When on-site, you'll deliver service and support directly to customers, and when based in the workshop, you'll be involved in mechanical assembly work. This role would suit a Mechanical Engineer, looking for a long-term secure workshop role with travel, specialist training, and the chance to become a technical expert. Ex Forces or REME Mechanics are also encouraged to apply. The Role: - Repairs and maintenance of mechanical machinery - Workshop and field based - Monday - Friday, salary up to 45k DOE The Person: - Background in mechanical engineering - Happy with travel and stays away - Full UK Driving License Job Reference Number: (phone number removed) To apply for this role or to be considered for further roles, please click "Apply Now" or contact [Jack Banks] at Rise Technical Recruitment. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates

An established engineering and manufacturing group is looking to recruit a Design Engineer to join a growing CAD and automation team. This is a key role supporting the development, automation, and testing of specialist engineered products across multiple UK operations. The position offers a strong mix of hands-on design, automation development, and product innovation, with exposure to advanced and regulated product environments. The Role Act as a core member of the CAD team, maintaining and expanding automated drawing systems Design and develop new products, prototypes, and test solutions Produce and manage drawings using AutoDesk Inventor and AutoCAD Support automation development using iLogic and in-house systems Collaborate with sales, design, and production teams to deliver certified products Contribute to value engineering and continuous product improvement Support testing handovers including documentation and pricing information Produce manufacturing drawings when required Assist the Design & Technical Manager with ad-hoc technical tasks Occasional UK travel; flexibility with working hours required to meet business needs Essential Skills & Experience Strong working knowledge of AutoDesk Inventor Working knowledge of AutoCAD Experience with iLogic and automated design systems High level of IT literacy, including Microsoft applications Good numeracy and literacy skills Self-motivated, reliable, and solutions-focused Strong written and verbal communication skills Ability to obtain security clearance Desirable Experience Product development and R&D experience Research or testing background Programming or automation experience Innovative, improvement-driven mindset Whats on Offer Competitive salary Long-term career development within a growing engineering group Exposure to specialist, high-value engineered products Comprehensive in-house training and ongoing development This role would suit a Design Engineer with strong CAD and automation experience looking to work on technically complex products in a collaborative, forward-thinking environment. If you are interested please click apply today. TPBN1_UKTJ

An opportunity for a Senior Applications Engineer has become available with my client who are a leading pump manufacturer. Their ideal candidate will have proven experience in the selection, preparation, and delivery of quotations for bespoke, large-scale pumping equipment. The role is office based and would suit an individual with a strong technical background in large bespoke pump systems and fluid dynamics. Senior Applications Engineer role: Working as the successful Senior Applications Engineer role you will be required to ensure proposals are delivered at the required margin and within agreed timescales, alongside providing high-level technical support and contributing to commercial decision-making. This position demands extensive technical expertise and the ability to confidently handle complex client requests, while working effectively to tight deadlines. Responsibilities: • Selection of bespoke pumping equipment based on customer specifications, utilizing advanced pump selection software and technical data. • Preparation and delivery of accurate, detailed, and commercially viable quotations for large-scale pumping systems, ensuring all information aligns with customer requirements and company objectives. • Ensure estimates and quotations are provided to customers on time, meeting all business KPIs. • Provide technical expertise throughout the quotation process, producing system curves, calculating pipe friction losses, and ensuring the technical integrity of proposals. • Liaise with Sales and Engineering teams to ensure customer requirements are fully understood and translated into feasible, cost-effective solutions. • Make key decisions regarding pricing, margin, and project scope, ensuring alignment with business objectives. • Use pump selection software and in-house tools to deliver optimal technical solutions, while also ensuring the efficient and timely processing of quotations. Senior Applications Engineer requirements: • Qualified with a relevant Mechanical Engineering discipline or equivalent. • Technical background in large bespoke pump systems and fluid dynamics. • Proven experience in pump selection and performance analysis, including the use of pump selection software and system curve generation. • Proven experience in preparing and delivering quotations for custom-engineered pumps, with a focus on large-scale, complex systems. • Experience in the wastewater industry or similar sectors, including a solid understanding of relevant industry standards and regulations. • Proven experience working within an ISO quality system and interpreting engineering drawings, specifications, and schematics. • Proficient in ERP systems and MS Office, with excellent attention to detail in all technical and commercial documentation. Senior Applications Engineer package: Salary up to £52k Bonus Scheme Buy Holiday Scheme Cycle to Work Scheme EAP / Employee Assistance Programme Enhanced Maternity Pay Friday Half-Days Life Assurance – 4x annual salary Paternity Pay – 2 weeks full pay Pension - Employee 5%, Employer 3% Refer a Friend Salary Sacrifice Schemes Sick Pay Training and Development

Trainee AI Programmer – No Experience Needed Future-proof your career in Artificial Intelligence – starting today. Looking for a career change? Currently employed but want something better? Or maybe you're between jobs and ready for a fresh start? ITOL Recruit's AI Traineeship is designed to get you into one of the fastest-growing industries with zero experience required. Train online at your own pace and land your first AI Engineer role in 1-3 months. Please note this is a training course and fees apply Job guaranteed - complete the programme and get a job or get your money back. Our candidates earn £28,000-£45,000. Why AI? AI is reshaping every industry you can think of. Healthcare, finance, retail, and manufacturing – they’re all scrambling for skilled professionals. The demand far outstrips supply, which means excellent salaries, flexible working arrangements, and genuine job security. How It Works Step 1 – AI Engineering Fundamentals Start with the basics of AI, including neural networks and large language models, to build a solid foundation in AI engineering. Step 2 – Data Fundamentals Understand the data workflow, from collection to cleaning, and learn how to prepare data for AI applications. Step 3 – Notebooks & IDEs Get hands-on with industry-standard tools like Jupyter Notebooks and VS Code to develop AI systems. Step 4 – Python Programming Master Python, covering everything from the basics to object-oriented programming (OOP). Step 5 – Python Streamlit Project Apply your Python skills by building a car price prediction app using Python and Streamlit. Step 6 – Python for Data Learn essential Python libraries like NumPy, Pandas, and Matplotlib for data manipulation and visualisation. Step 7 – AI Sentiment Analysis Project Work with Hugging Face to build a sentiment analysis classifier using real-world AI techniques. Step 8 – AI Prompt Engineering Master prompt engineering, learning how to craft effective prompts for controlling AI outputs. Step 9 – Retrieval-Augmented Generation (RAG) Learn how to integrate external knowledge into AI systems using RAG techniques and vector databases. Step 10 – AI Specialised Customer Service Chatbot Project Combine prompt engineering and RAG to build an AI-powered customer service chatbot, delivering intelligent responses using vector databases and knowledge bases. Step 11 – Machine Learning Fundamentals Understand machine learning principles and algorithms, and how to train and test models using scikit-learn. Step 12 – Machine Learning Project Put your machine learning knowledge into practice with a hands-on project. Step 13 – AI & Data Ethics Study the ethical considerations in AI, including issues of bias, fairness, and data privacy. Step 14 – Oral Exam Complete a virtual oral exam to assess your understanding and ability to apply your learning. Step 15 – AWS Certified Cloud Practitioner Finish with the AWS Certified Cloud Practitioner course and exam to gain essential cloud computing knowledge. What You Get · 100% online, self-paced training · Microsoft AI-900 certification included · 1-to-1 tutor and recruitment support · Real-world project experience · Job guarantee – get a job or your money back · Starting salary of £28,000–£45,000 We Get You Hired We're not new to this. ITOL Recruit has 15+ years of experience and has placed over 5,000 people into new roles. Our job programmes include certified tutors, UK-accredited qualifications, and one-on-one support from a recruitment adviser focused on placing you. We don't believe in empty promises. Complete our programme, follow the process, and if you don't land a job, you get your money back. "Five months from complete beginner to AI engineer. Best decision I ever made." – Jamie W., now working as a Junior AI Engineer in London Ready to Start? If you’re motivated, curious, and excited about technology, we’ll help you turn that into a career you can be proud of. Apply now, and one of our expert Career Advisors will be in touch within 4 working hours to guide you through your next steps

Water Hygiene Engineer (Field Based) £30,000 - £35,000 (OTE £40,000-£45,000+) + Company Benefits + Training + Progression + Premium Overtime + Company Bonus + Company Van Bedford , Bedfordshire (Or around: Milton Keynes, Luton, Stevenage, St Albans, Cambridge) Are you a Water Hygiene Engineer / Plumber with an NVQ Level 2 in plumbing looking for a varied role within a Market-Leading Water Hygiene Company where you will receive the training and development into becoming a fully qualified Water Treatment Engineer, with further progression opportunities to senior positions and plenty of premium overtime to boost your earnings? This well-established yet rapidly growing water-treatment specialist have been providing the service for over 30 years and cover the whole of the UK. They specialise in building bespoke water tanks and provide Legionella compliance and assessments. Due to a coworker moving on they are looking for a motivated candidate to join their ranks and take the role forward. In this dynamic role you will be tasked with going out to various commercial sites around the Southern Region carrying out planned projects, whether that be remedial works, new part installations or cleaning water tanks where no day will be the same. You will also receive training and gain experience with running hygiene contracts with the view to taking up a supervisory role. You will be provided with a Company Van, Fuel Card, Phone, and Laptop. You will work a Monday - Friday pattern of 8am - 5pm and will occasionally have to stay away overnight, with hotels and food expenses paid for. Overtime is paid at a rate of 1.5x with weekend overtime coming in at a further premium rate. This varied role would suit a Water Hygiene Engineer / Plumber with an NVQ Level 2 in plumbing looking for a field service role where they will technically develop and receive industry standard training within a well-established company known for their opportunities to increase your earning through premium overtime and bonuses. The Role: Installation and maintenance of Hot Water Tanks and Hot Water Cylinders Servicing TMV's and Pipelines + other Commercial Plumbing Works Field Service role with occasional overnight stays covering the Southern patch Full training (including L8) and progression on offer The Person: Water Treatment or Plumbing industry Commutable to Bedford Full drivers licence Engineer, Water Treatment, Mobile, Field, Plumbing, HVAC, Legionella, Commercial Plumber, Water, Installation, Maintenance, Commercial, Bedford, Milton Keynes, Northampton, Cambridge Reference number: BBBH23266 If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV, or call us now. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website. TPBN1_UKTJ

We have an exciting opportunity for a Principal Engineer based in Bedford for one of our clients on a Full Time Permanent basis. Summary of the Principal Engineer role Salary: £75,000 Location: Bedford Type of Contract: Permanent Hours: Monday Thursday 8.15am 4.45pm Friday 8.15am 1.45pm Responsibilities of the Principal Engineer Lead R&D initiatives and root cause analysis Enhance project toll gates Translate customer technical requirements and specifications Implement product standardisation strategy aligned with sales Provide technical support and leadership Quotation and selection processes for motors and pumps ensuring compliance with application Influence specification development ATEX competency lead in collaboration with Engineering Manager Requirements for a successful Principal Engineer Bachelors degree in mechanical engineering Experience of mechanical engineering design and analysis Experience of water industry markets Comprehensive understanding of mechanical engineering principles Knowledge in pump engineering Able to interpret drawings and technical specifications What our Client offers Life assurance Employee Assistance Programme Cycle to Work Scheme Early finish on Friday About Allstaff Recruitment Were an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors. Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we cant respond to everyone directly. If you dont hear from us within seven days, please assume you have not been successful this time. TPBN1_UKTJ

About Us At Target Maintenance, we provide property and facility maintenance alongside fire safety solutions to the commercial and property management sector. With a reach from the South Coast to Birmingham, were known for delivering reliable, high-quality work across both planned and reactive projects. Weve built a positive, relaxed, and collaborative culture where theres no micromanagement - just good people doing great work and supporting one another. About the Role Were looking for a Fire Alarm Engineer to join our growing fire safety division. In this hands-on role, youll install, maintain, and fault-find on a range of fire alarm systems across our client sites, ensuring all work is completed safely, on time, and in line with regulations. This role would suit someone who enjoys autonomy, takes pride in high standards, and is comfortable working in a mobile, field-based environment. Requirements Key Responsibilities Service and commission fire alarm & AOV systems Carry out PPM and reactive maintenance on a variety of fire alarm systems Fault-finding and diagnostics Ensure work complies with BS5839 standards and other relevant regulations Maintain accurate records and complete reports via internal systems Liaise with office teams and clients on scheduling, access, and issues Uphold strong health and safety practices at all times Desired Skills & Experience Experience with a range of addressable and conventional fire alarm systems Familiarity with brands like Apollo, Advanced, Kentec, C-Tec, etc. Understanding of fire safety regulations (BS5839) Electrical Installation lvl 3 Good communication and problem-solving skills Basic IT skills for completing reports and updates Full UK driving licence Benefits Offer & Perks £40,000 - £45,000 (based on experience) Company van and fuel card Uniform and phone provided 20 days holiday plus bank holidays 10-hour days, door-to-door (travel is included in your 10 hours) Overtime opportunities Our Commitment to Equality, Diversity & Inclusion Target Maintenance is an equal opportunities employer. We encourage applications from everyone, regardless of age, disability, gender identity, marital status, pregnancy or maternity status, race, religion or belief, sex, or sexual orientation. We are committed to fostering an inclusive workplace where all employees feel respected, valued, and able to contribute fully. TPBN1_UKTJ

Role: Maintenance Engineer Location: Milton Keynes Salary and Incentives: £51,370, Pension, Overtime and more Shifts: 2 days 2 nights 6 off The Company I am proud to be working with a Global Client in the Warehousing and Automation sector in Milton Keynes, My clients are specialist in the design, development and manufacturing the automation involved and used in warehouses across the world. My client is approaching the century mark and now have sites in 3 different continents totalling over thousands of employees across the globe. At this site in Milton Keynes, they are looking for a Maintenance Engineer to join the team on a multi million pound site that has just turned over 6 years old. Joining a fully automated industry 4.0 site you will be working on a site with some of the latest automation and technology with continuous investment from the company into the site and their employees. My client love to promote from within into potential Maintenance Team leader roles and even further on from there The role As a Maintenance Engineer your roles will include: Working in a highly automated factory in the FMCG industry with the ASRS being a dominant factor Your responsibilities will include Reactive and PPM maintenance on all the machines and equipment on site, such as: Mini Loaders, Conveyors, Hanging Garment conveyors, Palletisers and de palletisers, Shuttle Systems and Cranes A lot of the role will be fault finding electrically working with various components Mechanically working with various components and swapping like for like Root cause analysis, Looking at recurring faults and Engineering problems out The Candidate The ideal candidate I am looking for is: You will need a recognised Engineering Qualification Strong communication skills as you will be joining 1 Senior and 5 fellow Engineers on shift A team player who can work with their team but also individually when needed to Confident in fault finding in panels An Understanding of Profibus and Profinet The Package The package you will be receiving is: An annual salary of £51,370 plus salary increase after probation Allowed to freely shift swap and take 16 days holiday A good pension Potential progression for the right individual Cycle2Work Scheme ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation TPBN1_UKTJ

We have an exciting opportunity for a Senior Applications Engineer based in Bedford for one of our clients on a Full time permanent basis. Summary of the Senior Applications Engineer role Salary: £48,000-£52,000 Location: Bedford Type of Contract: Permanent Hours: 37.5 hours Monday – Thursday 8.30am-4.45pm Friday 8.30am-1.30pm Responsibilities of the Senior Applications Engineer • Lead selection of bespoke pumping equipment, • Preparation and delivery of quotations for large-scale pumping systems, • Provide technical expertise during the quotation process, • Supporting the Commercial Manager, • Keep data recording systems up to date, • Technical support Requirements for a successful Senior Applications Engineer • HND in Mechanical Engineering, • Experience in pump selection, • Experience in preparing and delivering quotations, • Experience in the wastewater industry or similar sectors, • Experience in working within an ISO quality system, • Proficient in pump selection software and technical tools About Allstaff Recruitment We’re an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors. Check out our jobs page for our latest vacancies in your area and follow us on Facebook, LinkedIn and Twitter. **Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we can’t respond to everyone directly. If you don’t hear from us within seven days, please assume you have not been successful this time

Service Engineer (Balers / Compactors / Shredders) £45,000 - £50,000 + OTE 67K + Van + Door to Door Pay + Flexi-time Bedford Are you a Service Engineer with experience working on balers, compactors or shredders looking to cover a local patch, with outstanding benefits including a competitive salary package and ample overtime to maximise your earnings? In this role you will be covering a local patch between Northampton, Oxford, Luton and Cambridge, where you will repair, service and commission waste and recycling machinery such as balers, compactors and shredders. You will be given on-the-job expert training, then work autonomously, travelling between customer sites, with a wealth of overtime available. Founded 30 years ago, this company supply waste machinery and pride themselves on their high quality of work, as well as their customer and employee satisfaction. They primarily supply into the distribution, manufacturing, retail and waste management industries, offering plenty of work and stability. This role would suit a Service Engineer who has experience working on balers, compactors and shredders, looking for ample overtime and stability, within a nationally renowned waste company. The Role: Repairing, servicing, maintaining and commissioning waste machinery Full product training on balers, compactors and shredders Covering a local patch between Northampton, Oxford, Luton and Cambridge Monday to Friday, 40 hours a week, plenty of overtime paid at 1.5x The Person: Service Engineer Experience working with balers, compactors and shredders Reference number BBBH23290d Engineer, Engineering, Servicing, Repairing, Commissioning, Mechanical, Hydraulics, Waste, Field, Local, Electric, Electrical, Industrial, Manufacturing, Machinery, Bedford, Northampton, Luton, Oxford, Cambridge If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website TPBN1_UKTJ

Senior Applications Engineer Bedford Up to £52,000 Do you have a proven background in pumps, pumping systems, rotating equipment, or wastewater? Are you experienced in delivering quotations, technical information, and solutions throughout a tendering process? Then get in touch! Kingston Barnes is currently recruiting for a Senior Applications Engineer on behalf of our client in the Bedford area. Our client is a well-known manufacturer of pumping plant for the water or wastewater industry. The Role: This role handles pump enquiries from initial request to final quotation, including selecting and pricing pumping equipment for original equipment, aftermarket, and bespoke tendered projects. It involves liaising closely with engineers to review drawings and bills of materials, providing technical support, and acting as the main link between customers and engineering teams through regular communication. Key Responsibilities: • Selection of pumping equipment to customer specifications and requirements, • Prepare estimates and quotations for customers in a clear, detailed, and accurate manner ensuring they are on time and within KPI’s, • Ensure all data recording systems and costings are up to date, • Build strong working relationships with customers and potential customers, • Be fully involved with bespoke projects, providing technical input and support, • Aid the sales manager when required About you: • A qualified mechanical engineer (HNC or equivalent), • Experience/knowledge of centrifugal pumps, • Experience of preparing and delivering estimates/quotations, • Experience working within an ISO quality system, • Excellent IT skills including ERP systems and MS Office. Benefits: • Salary up to £52,000, • Monday to Friday, • Pension 3% employer 5% employee, • Life Assurance 4 x salary, • 25 days holiday + banks, and the ability to by another 5 days, • Enhanced maternity and paternity leave, • EAP, • Enhanced sick pay If you are interested, please call Josh Hoyle on (phone number removed) or apply online * Candidates must be eligible to live and work in the UK to apply for this position

Service Engineer (Industrial/Manufacturing/Waste) £42,000 - £44,000 + OTE 59K + Van + Door to Door Pay + Flexi-time Bedford Are you a Service Engineer from a waste, industrial, manufacturing or similar background looking to join a rapidly expanding company at the pinnacle of their industry, offering door to door pay and ample overtime to maximise your weekly earnings? In this role you will be covering a local patch between Northampton, Oxford, Luton and Cambridge, where you will repair, service and commission waste and recycling machinery such as balers, compactors and shredders. You will be given on-the-job training by industry experts, then work autonomously, travelling between customer sites, with a wealth of overtime available. Founded 30 years ago, this company supply waste machinery and pride themselves on their high quality of work, as well as their customer and employee satisfaction. They primarily supply into the distribution, manufacturing, retail and waste management industries, offering plenty of work and stability. This role would suit somebody who is a Service Engineer from an industrial, manufacturing, waste or similar background, looking for ample overtime, within a nationally renowned waste company. The Role: Repairing, servicing, maintaining and commissioning waste machinery Full product training on balers, compactors and shredders Covering a local patch between Northampton, Oxford, Luton and Cambridge Monday to Friday, 40 hours a week, plenty of overtime paid at 1.5x The Person: Service Engineer Industrial, manufacturing, waste or similar background Reference number BBBH23290a Engineer, Engineering, Servicing, Repairing, Commissioning, Mechanical, Hydraulics, Waste, Field, Local, Electric, Electrical, Industrial, Manufacturing, Machinery, Bedford, Northampton, Luton, Oxford, Cambridge If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website TPBN1_UKTJ

Bedford Salary - Negotiable DOE Monday - Friday 37 hours per week. Your new company: Based in Bedford, you will be joining a well-known and growing manufacturing business specialising in large-scale automated machinery manufacturing. Due to increased business and continuous growth, they are now recruiting for an experienced Electrical Design Engineer to join their design and automation team. The Electrical design engineer will be involved in the design and development of a range of large- and small-scale machinery. With a range of customers, and a large order book, this is an excellent time for an Electrical Design engineer to join an ever-expanding business. Key Responsibilities & Duties: Carrying out electrical, pneumatic design Carrying out the validation of all designs to the current safety standards and requirements Carrying out design studies and reviews and preparation of specifications for special applications. Completion of the FAT document and 'as-built' electrical documentation. Support installation, troubling shooting visits at customer sites world-wide, working closely with Service and Aftercare teams This is just a summary of duties, and other responsibilities will be required. Skills & Experience required: Experience designing electrical control systems for special purpose machinery. Experience designing safety control systems and validation using appropriate software Good understanding of AutoCAD Electrical or EPLAN Experience in compiling BOM's. Knowledge of safety equipment and standards What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on 01603580180 for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at hays.co.uk TPBN1_UKTJ

Bedford Salary - Negotiable DOE Monday - Friday 37 hours per week. Your new company: Based in Bedford, you will be joining a well-known and growing manufacturing business specialising in large-scale automated machinery manufacturing. Due to increased business and continuous growth, they are now recruiting for an experienced Electrical Design Engineer to join their design and automation team. The Electrical design engineer will be involved in the design and development of a range of large- and small-scale machinery. With a range of customers, and a large order book, this is an excellent time for an Electrical Design engineer to join an ever-expanding business. Key Responsibilities & Duties: Carrying out electrical, pneumatic design Carrying out the validation of all designs to the current safety standards and requirements Carrying out design studies and reviews and preparation of specifications for special applications. Completion of the FAT document and 'as-built' electrical documentation. Support installation, troubling shooting visits at customer sites world-wide, working closely with Service and Aftercare teamsThis is just a summary of duties, and other responsibilities will be required. Skills & Experience required: Experience designing electrical control systems for special purpose machinery. Experience designing safety control systems and validation using appropriate software Good understanding of AutoCAD Electrical or EPLAN Experience in compiling BOM's. Knowledge of safety equipment and standards What you need to do now if you're interested in this role: Click 'apply now' to forward an up-to-date copy of your CV or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us now on (phone number removed) for a confidential discussion about your career. Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C's, Privacy Policy and Disclaimers which can be found at (url removed)

An exciting opportunity has arisen for a driven engineer to join a small, innovative R&D team in a market-leading engineering business. This is a commercial, product-focused role, combining design, development, and hands-on prototyping and testing. Youll work across applications and product development projects, helping shape and deliver practical, cost-effective engineering solutions. Key Responsibilities Lead and contribute to the design, development, and testing of new machinery and product lines. Create detailed 3D CAD models (SolidWorks) and 2D drawings to support prototyping and production. Build, assemble, and test prototypes in dedicated R&D facilities, including wet test and assembly areas. Research and specify components, materials, and suppliers to support innovation and cost reduction. Collaborate with the wider engineering and manufacturing teams to ensure designs are practical, manufacturable, and meet business requirements. Record test results, prepare technical documentation, and support continuous improvement initiatives. Ideal Candidate 35 years commercial engineering experience (not graduate level). Strong SolidWorks 3D modelling skills. Comfortable with hands-on prototyping, assembly, and testing, this is not a purely desk-based CAD role. Able to work autonomously in a small team environment. Strong practical problem-solving skills and technical fundamentals. Commercially minded, understanding the need to deliver products efficiently and effectively. BEng / MEng in Engineering or equivalent. Why Join Be part of a small, collaborative R&D team with direct impact on product development. Work in a well-equipped environment with prototyping, testing, and fabrication facilities. Opportunity to contribute to innovative projects in a growing engineering business. If you are an experienced, hands-on engineer looking to take ownership of projects and help drive product innovation, we want to hear from you. TPBN1_UKTJ

Software Engineer - 50K - Bedfordshire - Hybrid, healthcare, 24 days holiday, pension We are looking for a highly motivated and experienced Software Engineer to join an award winning international organisation, with a large presence both in the UK and US. They've been established since the 1980s with the UK head office in Bedfordshire. This exciting opportunity will suit a talented Software Engineer who is well versed in the modern Java Stack joining at team of Developers, Business Analysts and Testers. They are a big believer in sharing thoughts and encouraging and supporting innovation and creativity. The Software Engineer will also be given the chance to be involved in all aspects of the project process from conception through to completion and launch. The environment is relaxed yet professional, gone are the days of a corporate rigid structure and you will be given flexibility to get the job done! Software Engineer skills • Java / Spring Boot * JavaScript, React * RESTful APIs * SQL and database management * Middleware & Client Facing Web Applications You will be a motivated Software Engineer, a good communicator and have a natural desire to create amazing code. The successful Software Engineer should have strong problem solving abilities, organisational skills and the ability to work as part of a team. We are interviewing currently so apply now for immediate consideration for the Software Engineer position or contact George Harvey at ITSS Recruitment for further information

We have an exciting opportunity for a Compressed Air Engineer based in Bedford for one of our clients on a Full time Permanent basis. Summary of the Compressed Air Engineer role Salary: £35,000 - £39,000 Location: Bedfordshire Type of Contract: Permanent Hours: Monday – Friday 8am-5pm Responsibilities of the Compressed Air Engineer * Maintain, repair and install compressed air systems and related equipment * Run diagnostic tests to find and fix system issues * Log job reports * Travel to customer sites within a 30 mile radius to repair equipment * Complete planned and preventative maintenance Requirements for a successful Compressed Air Engineer * Experience in a similar Service Engineer role * Electrical and mechanical skills * Experience in scheduled maintenance * Fault diagnosis and repair experience * Full UK driving licence What our Client offers * Training and ongoing opportunities * 25 days holiday plus bank holidays, increasing to 30 days the longer you are with them * Company vehicle and specialist tools * Health insurance and a contributory pension scheme About Allstaff Recruitment We’re an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors. Check out our jobs page for our latest vacancies in your area and follow us on Facebook, LinkedIn and Twitter. **Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we can’t respond to everyone directly. If you don’t hear from us within seven days, please assume you have not been successful this time

We have an exciting opportunity for a Principal Engineer based in Bedford for one of our clients on a Full Time Permanent basis. Summary of the Principal Engineer role Salary: £75,000 Location: Bedford Type of Contract: Permanent Hours: Monday – Thursday 8.15am – 4.45pm Friday – 8.15am – 1.45pm Responsibilities of the Principal Engineer * Lead R&D initiatives and root cause analysis * Enhance project toll gates * Translate customer technical requirements and specifications * Implement product standardisation strategy aligned with sales * Provide technical support and leadership * Quotation and selection processes for motors and pumps ensuring * compliance with application * Influence specification development * ATEX competency lead in collaboration with Engineering Manager Requirements for a successful Principal Engineer * Bachelor’s degree in mechanical engineering * Experience of mechanical engineering design and analysis * Experience of water industry markets * Comprehensive understanding of mechanical engineering principles * Knowledge in pump engineering * Able to interpret drawings and technical specifications What our Client offers * Life assurance * Employee Assistance Programme * Cycle to Work Scheme * Early finish on Friday About Allstaff Recruitment We’re an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors. Check out our jobs page for our latest vacancies in your area and follow us on Facebook, LinkedIn and Twitter. **Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we can’t respond to everyone directly. If you don’t hear from us within seven days, please assume you have not been successful this time

Drive growth as an Automotive Technical Account Manager, combining technical expertise and sales skills to support OEM and Tier suppliers with high-performance sealing solutions. Automotive Technical Account Manager Home based with UK and overseas travel required Full time, permanent position £55,000 - £70,000 depending on experience Please Note: Applicants must be authorised to work in the UK Our client is a leading provider of advanced sealing solutions, supplying high-quality, precision products to industries including Automotive, Defence, Oil & Gas, Renewables and Medical. They work closely with customers to deliver sealing solutions that meet the most demanding performance, validation and quality standards. The Role As an Automotive Technical Account Manager, you will play a key role in driving sales growth within the automotive sector while also managing selected non-automotive accounts. Key Responsibilities: Identify, target and secure new business opportunities primarily within the automotive sector Develop and deliver strategic sales plans to achieve revenue and growth targets Manage the full sales cycle, from lead generation through to contract negotiation and closure Provide technical consultation to customers on sealing products, materials and applications Support customers through design, validation, testing and production phases Deliver technical presentations and product demonstrations Build and maintain strong relationships with key OEM and Tier 1/2 accounts Conduct regular customer visits to understand requirements and identify upselling opportunities Monitor market trends, competitor activity and customer feedback Contribute to product development strategy based on market and customer insight Prepare sales forecasts, reports and analysis for senior management Maintain accurate CRM records and ensure compliance with quality and regulatory standards Benefits They offer a supportive and professional working environment where expertise is valued, and continuous development is encouraged. In return for your commitment, you can expect: Competitive salary package with performance-related bonus Company car Private medical insurance Company support for travel and customer engagement Opportunity to work with innovative, high-performance products Exposure to major automotive OEMs and Tier 1 suppliers Long-term career development within a growing, technically focused business The Ideal Candidate You will be a commercially driven technical sales professional with a strong background in automotive or engineered products. About you: HNC or equivalent qualification in Engineering, Mechanical Engineering or a related discipline or served time in industry Proven experience in technical sales, ideally within sealing solutions or a related engineering sector Strong technical knowledge of sealing technologies, materials and applications Experience working with automotive OEMs and Tier 1/2 suppliers Excellent communication, negotiation and presentation skills A proactive, self-motivated approach with a strong drive to achieve sales targets The ability to build long-term customer relationships at multiple levels Willingness to travel regularly to customer sites How to apply for the role: If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. You must be authorised to work in the UK. NO AGENCIES PLEASE Other suitable skills and experience include Technical Sales Engineer, Automotive Account Manager, Business Development Manager (Engineering), OEM Account Manager, Field Sales Engineer, Key Account Manager (Automotive), Applications Engineer, Commercial Engineer, Sales Engineer – Automotive, Technical Business Development Manager TPBN1_UKTJ

Join an award-winning, global leader in design, innovation, and advanced manufacturing. This pioneering business designs and delivers bespoke, high-performance automation systems and cutting-edge machinery used by some of the world’s most recognised brands. With a heritage spanning over 100 years, this company has built a reputation for engineering excellence, technical innovation, and trusted partnerships across the food, beverage, pharmaceutical, and personal care industries. Now, they’re looking for a Control Systems Engineer to play a key role in shaping the next generation of intelligent machinery. Job Responsibilities: • Design and develop electrical control systems and PLC software for special-purpose machinery, • Lead and contribute to design studies, reviews, and technical specifications for bespoke applications, • Produce FAT documentation and complete accurate as-built electrical records, • Support engineering teams with manufacturing queries and quality improvements, • Carry out installation, commissioning, and troubleshooting at customer sites worldwide, • Collaborate closely with Service and Aftercare teams to ensure exceptional delivery Experience required: • Proven experience designing electrical control systems for special-purpose machinery, • Solid knowledge of machine safety equipment and relevant standards, • Hands-on experience with Siemens and/or Allen-Bradley PLC programming, • Confident commissioning machinery to FAT protocols Why Join? • Work on innovative, one-of-a-kind machinery — no repetitive projects, • Be part of a financially stable, century-old business with a forward-thinking mindset, • Collaborate with highly skilled engineers in a culture that values quality, creativity, and continuous improvement, • See your work in action at global customer sites

Summary of the Senior Applications Engineer role. Requirements for a successful Senior Applications Engineer.

Senior Applications Engineer Bedford Up to £52,000 Do you have a proven background in pumps, pumping systems, rotating equipment, or wastewater? Are you experienced in delivering quotations, technical information, and solutions throughout a tendering process? Then get in touch! Kingston B

Due to continued growth, they are seeking a Field Applications Engineer - Relays / Connectors to join their technical sales and solutions team. The Field Applications Engineer - Relays / Connectors will use own extensive technical knowledge to identify, develop and implement technical solutions for

Senior Applications Engineer role: Working as the successful Senior Applications Engineer role you will be required to ensure proposals are delivered at the required margin and within agreed timescales, alongside providing high-level technical support and contributing to commercial decision-making.

Due to continued growth, they are seeking a Field Applications Engineer - Relays / Connectors to join their technical sales and solutions team. The Field Applications Engineer - Relays / Connectors will use own extensive technical knowledge to identify, develop and implement technical solutions for

We want all our colleagues to grow and build careers with Dale.We invest in our people for the future.Many of our team members have been with us for over 30 years and some of our management team began their careers as apprentices.As we have grown so too have they and that knowledge is passed down as

Are you a refrigeration engineer looking to come off the tools? We're supporting a specialist refrigeration and air conditioning business looking to bring in an. Support technical queries alongside the wider engineering team. A refrigeration engineer looking to come.

Engineering or technical qualification (chemical engineering preferred). We are partnering with a fast-growing international business seeking aField Application Engineerto join their expanding team. This is a hands-on role that blends engineering expertise, problem-solving, and technical training in