Airport jobs in Palm Bay, FloridaCreate job alerts

Overview Unified Women's Healthcare is the leading national platform for women's healthcare. Our affiliated practice Hibiscus Women's Center in Melbourne, Florida is seeking a Full Time Certified Nurse Midwife (CNM). Hibiscus Women's Center is a single-specialty practice. Our Certified Nurse Midwives and physicians function as a team to manage prenatal, intrapartum, and postpartum care. Position Highlights: • Join an established, growing practice with 10 clinicians: 3 physicians and 7 CNMs, • Hospital Affiliation: Holmes Regional Medical Center - Level II NICU, 24-hour neonatology, and OB hospitalists, • Volume: 20-25 patients per day, • Weekly Schedule: 2.5 clinic days/week + 24hrs of call OR 48hrs of call., • Full scope midwifery care Requirements: • AMCB Certified Nurse-Midwife, • Graduate of a nurse-midwifery education program accredited by ACNM Accreditation Commission for Midwifery Education (ACME), • Master's degree in Nursing (MS/MSN), • Active and unrestricted state registered nurse (RN) license, • Current Unrestricted DEA License or ability to obtain One year of full-time experience as a CNM Location Highlights: Florida's Space CoastLive where others vacation! • Beautiful beaches, boating, fishing, and year-round outdoor recreation, • Top-rated schools and family-friendly neighborhoods, • Quick access to Orlando, major theme parks, and international airport Florida Woman Care affiliated with Unified in 2009 and today has grown to more than 250 locations with 600 providers who offer both traditional women's healthcare services as well as maternal-fetal medicine, urogynecology, onsite mammography, and laboratory services. Practices expand across cities throughout the entire State of Florida, from the Panhandle to South Miami. Our medical affiliate is a drug-free workplace and an Equal Opportunity Employer. Keywords: CNM, Certified Nurse Midwife, midwife, midwives #LI-Onsite

Do you enjoy late model cars and have a good attention to detail? Need a flexible schedule plus access to DailyPay? Managed Labor Solutions (MLS).Rental Car Cleaner for our partners on airport location.Efficiently and safely clean both the interior and exterior of vehicle.Check fuel level, warning l

Job Description HIGHLAND EXPRESS SHUTTLE (Melbourne ,FL) The information below is for a van driver position with Highland Express Shuttle Service. Description: Van driver will transport Military Applicants to and from Military Entrance Processing Center for medical appointments and airport and occasionally. Armed Forces Recruiting Station located on route above to the Military Entrance Processing Station. Company provides vehicle along with maintenance, fuel, mobile phone. Route: Transport Military applicants (people who are trying to join the military) Also backs up a route that picks up applicants in Orange City,FL, Jacksonville ,FL Company uses E-Verify for all employees. Location: Orlando , FL (DRIVER MUST LIVE WITH 10 mile radius Melbourne, FL ) Position: Van Driver, Part Time Veterans Prep: Yes Vehicle: 15 passenger Ford E350 van. Work Week: )Sunday -Wednesday 3-4 days per week for part time driver (20-40 hrs) a week possible to help out with over-load sun-wed if needed. Will also need you to be a backup driver for the Tampa route . Salary: $15.00 an hour Sunday thru to Friday, as needed. Raises: Eligible for a Raise after 90 days and annual thereafter Pay Period: From 1st to 15th is deposit at end of month; 16th to 30th or 31st deposit 15th of next month, direct deposit only and taxes will be taken out. Requirements: High School diploma/GED, clean MVR (Motor Vehicle Record), Police Record Check, pre-employment drug screening, must pass DOT physical (company paid), CDL IS A PLUS BUT NOT REQUIRED. Must run Elog and complete some paperwork on the route. Must have internet at home, own a smart phone and have basic skills like texting a picture, taking a picture with phone and checking email daily. Company does not provide internet in home. No applicants excepted that do not know how to use email. Company DescriptionWe serve over 500 recruiting and military entrance processing stations across 40+ states and Puerto Rico. Our veteran-led team prioritizes excellence and safety. Help us continue to set the standard in military transportation! Join us in making an impact!We serve over 500 recruiting and military entrance processing stations across 40+ states and Puerto Rico. Our veteran-led team prioritizes excellence and safety. Help us continue to set the standard in military transportation! Join us in making an impact!

We look forward to seeing you at the event!.

As a Member Service Specialist (Teller/Customer Service) in our Airport Branch,. Member Service Specialist Key Responsibilities. Consistently demonstrates effective sales and service skills by meeting established goals.

Job Description Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (MLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. JOB SUMMARY: Under the direction of the Facilities Manager, the MLB Facilities Technician is responsible for the comprehensive maintenance of equipment at the MRO facility. This role includes the upkeep and security of the Melbourne MRO, the Paint hangar, and the Rialto office facilities, with a strong emphasis on Employee Health and Safety. Key responsibilities involve supporting various facility-related activities, including HVAC, electrical systems, plumbing, tooling, ground support equipment, fire and safety measures, parking lot maintenance, and landscaping. MINIMUM REQUIRED QUALIFICATIONS: • High school diploma or equivalent, • Five (5) years of experience in facilities maintenance, • Valid driver’s license required with good motor vehicle record, • Experience in Commercial HVAC, Plumbing, Electrical, and automotive repair., • Ability to drive forklift and obtain certificate, • Knowledge and ability to follow safety practices and recognize hazards, • Skill in using hand and power tools, • Read and interpret blueprints or wiring diagrams, • Basic computer skills, • Good organizational and communications skills, • Detail oriented, • Valid and active driver's license required This position requires successful completion of the Melbourne Airport background check process. ADDITIONAL DESIRED QUALIFICATIONS: • HAZWOPPER and or OSHA 30 Certified a plus, • Must be able to accompany contractors throughout facilities, grounds and roof including satellite buildings, • Must be able to work safely in lifts up to 50’ high and climb ladders, • Must be able to work in varying temperatures/weather conditions, both indoors and outdoors., • Must be able to use hand tools, • Conduct / oversee maintenance of facility and grounds of the MLB MRO facilities and buildings, • Assure optimal functioning of building systems (HVAC, fire/safety, electrical, plumbing, elevators, etc.) and perform basic preventive maintenance, • Maintaining tooling and ground support equipment for hangar, • Point of contact and supervision of all building contractors, • Schedules vendors, Supervise work of building contractors and services, • Set up furniture/deliver furniture to employees, • Provide assistance for set up of events, • Pick up parts, tools for the facilities as needed., • Must be reliable, decisive, independent, work well with others, and a self-starter., • Responsible for all activities pertaining to Environmental, Health and Safety, • Interface professionally with company employees, customers and government officials in all areas relating to the environment, health, and safety. Provide guidance and advice to management in support of EHS programs and compliance, • Conduct routine audits for environmental, health and safety compliance, • Maintain and ensure environmental compliance with permits, reports and company objectives. Key environmental tasks include oversight of Hazardous Waste/RCRA, Title V Air, Storm water, and Chemical Management Programs., • Knowledge of federal, state and local EHS regulations., • Perform other related duties as required/assigned. Compensation and Benefits: The compensation for this position typically falls between $28 and $40 per hour. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Summary Responsible for the safe, orderly, and expeditious flow of air traffic control duties in a Visual Flight Rules (VFR) Air Traffic Control Tower. Dimensions of Position Works under the general supervision of the Tower Manager who relies on the incumbent to perform established duties independently. On new or revised procedures, the manager gives detailed instructions and observes, and checks work during or immediately after completion according to complexity of the task or until satisfied the incumbent can perform it independently. Accountability 1. Makes decisions involving: • The order of departures that will assure all aircraft equitable treatment and will assure that departing IFR flights operate at the fix, altitude, and the time designated by the center or approach control clearances., • The times and direction of takeoff and any turns necessary for departure., • Whether inbound aircraft are to land immediately or circle and whether distances are lengthened to control the arrival of an aircraft at a given point., • The active runway and possible simultaneous use of other runways., • The time and methods by which arrivals and departures can be interspersed with the least delay to traffic., • When landing and departing aircraft are cleared to use the runways to assure standard separation between aircraft on the runways., • The sequence of arriving traffic, before it enters the traffic pattern, to assure a safe, orderly flow of aircraft on final approach to the landing runway., • The sequence of VFR and IFR traffic, using radar equipment as an aid and, when delegated, separating IFR traffic., • When VFR flights through the airport traffic area can be authorized. 2. Determines the usability of communications frequencies available to him/her as other navigational aids used to control air traffic. Monitors navigational aids and monitors control panels, including BRITE display to determine acceptability of its alignment and display presentation. Instructs pilots to change radio frequencies/radar beacon codes., 3. When appropriate, coordinates with the other controllers on movements of both arrival and departure aircraft., 4. When traffic conditions warrant, controllers in non-approach terminals are responsible for: • Preplanning traffic sequencing and separation over an area which may reach out to a radius of 5 miles or more., • Preplanning and setting up check points required to ensure the maintenance of necessary traffic separation., • Maintaining a continuous mental picture and evaluation of a constantly changing traffic complex frequency dispersed over an equivalent geographic area., • Maintaining continuous radio watch with aircraft which have previously contacted the facility., • Accepting responsibility to handle IFR traffic at his/her airport. 5. Studies weather bureau reports and forecasts, obtains LAWRS/SAWRS weather certification, observes weather from the tower and records pilot reports to determine the effect of present and anticipated weather on traffic; furnishes aircraft with information such as field conditions, altimeter settings, weather conditions, operating status of navigational aids, and observed malfunctioning of aircraft, forwards to the weather bureau and the appropriate center, pilot weather reports and reports based upon personal observation of weather conditions; operates light guns, runway lights, field lighting, jet barriers etc., 6. Orients pilots of aircraft lost or in difficulty; determines whether a given situation may operations offices, airport management offices, and fire and ambulance services., 7. Performs lower grade level duties as necessary to meet operational requirements and for proficiency maintenance., 8. Provides OJT training to others. Requirements Individual must have a CTO Certificate and a current Class II Medical Certificate. Position is subject to drug and/or alcohol testing per the DOT/FAA requirements (pre-employment, random, reasonable cause/suspicion, post-accident). Individual must have held a Control Tower Operator Certificate (CTO) with a facility rating or have held an FAA Credential with a tower rating, for a minimum of six months in an Air Traffic Control Tower. Pay: $44.51 Per Hour HW Rate: $4.98

Job DescriptionSalary: $20.00 Per Trip About 654 Global 654Global is apremier ground transportation companyspecializing insafe and reliabletransport for commercial airline flight crews. We are looking forprofessional, friendly, and dependableShuttle Drivers to join ourMLB airport location. If youre acustomer-focused driverwho valuessafety, punctuality, and exceptional service, we want you on our team! What We Offer • Competitive pay, • Potential Daily cash tips, • Flexible shifts: Morning, evening, and night shifts available. Weekend and holiday availability required, • Transport airline crew members betweenairports and hotelsin asafe, timely, and professionalmanner, • Provideexceptional customer service, ensuring a smooth and comfortable ride, • Assist passengers withluggage loading and unloadingas needed, • Communicate effectively with dispatch viaradio, phone, and in-personinteractions, • UseGPS and flight tracking technologyto monitor schedules and pick-up locations, • Valid drivers licensewith aclean driving record, • Ability tolift up to 75 lbs, • Must beat least 25 years old, • Ability topass a pre-employment drug test, physical, MVR report, and background check, • Must be able tospeak, read, and write in English At 654Global, we dont just hire driverswebuild a teamof professionals dedicated to providing aworld-class transportation experience. We valuereliability, customer service, and teamwork. If youre looking for astable, rewarding career, wed love to hear from you! Apply today and start driving your career forward with 654Global!

Job Description Do you have a minimum of five (5) years’ experience in aircraft maintenance on Falcon's, alteration of turbo fan powered business aircraft, and proficient in the use of the various inspection methods, techniques, and practices? If so, APPLY TODAY! Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a Quality Control Inspector who will be primarily responsible for performing inspections of aircraft maintenance and alterations for quality and airworthiness. The Quality Control Inspector may also perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer’s aircraft. DUTIES AND RESPONSIBILITES • Responsible for Quality Assurance for quality and airworthiness and may report to Maintenance Supervision for the assignment of aircraft maintenance tasks., • Using technical data acceptable to and/or approved by the FAA, the Quality Control Inspector provides inspection and approval for return to service with respect to work performed., • Adheres to general work and safety requirements., • May travel to locations other than the Repair Station’s fixed location to support customer aircraft., • May perform inspections, adjusts and repairs, replace components and corrects any malfunction or deficiency with and without power applied to the aircraft., • May perform repairs on components removed from the aircraft., • May remove and re-install aircraft components to gain access for the performance of assigned tasks., • May troubleshoot (fault isolation) aircraft system malfunction., • May perform basic mechanical and electrical removals and installations., • Documents, records, and signs for work performed and/or inspected per RSM/QCM., • Perform other related tasks as assigned by supervision., • May fuel and defuel aircraft., • May perform aircraft line services., • Performs inspection on-site and at off-site locations., • Supports production aircraft under Production Certificate System., • Assists other employees in the performance of their duties within area(s) of qualification., • Is familiar with and adheres to the RSM/QCM and applicable regulations., • Possess a Mechanics certificate with Airframe and Power plant ratings., • Minimum 5 years’ experience in aircraft maintenance and alteration of turbo fan powered business aircraft., • Trained in or experience with the methods, techniques, practices, aids, equipment, and tools used to perform aircraft maintenance and alterations., • Minimum 5 years' experience working on our Falcon models., • Thoroughly familiar with the applicable regulations, the RSM/QCM and proficient in the use of the various inspection methods, techniques, practices, aids, equipment, and tools appropriate for the work being performed and approved for return to service., • Able to work unsupervised for extended periods., • Excellent written and verbal communications skills., • Can Do attitude – highly motivated,, • Demonstrate excellent customer service skills., • Team player that exhibits and models Dassault Falcon Jet core values and attributes., • Repair Station Training, • Applicable Airframe Initial Training, • Applicable Engine Training, • Applicable Avionics Systems Training, • RVSM Training, • FAR 91.411/FAR 91.413 Training, • Human Factors Training Must be able to climb and lift up to 50lbs. This position requires successful completion of the Melbourne Airport background check process. Compensation and Benefits: The compensation for this position typically falls between $38 and $55 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Do you have an A&P license and 3 years or more of Falcon or corporate jet and/or military aircraft airframe maintenance experience? If so, Apply Today! Join Dassault Falcon Jet recently opened the state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet serves customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a full-time Aircraft Maintenance Technician who works as part of an assigned hangar team which is comprised of both Maintenance Technicians and Quality Inspectors, in support of planned aircraft maintenance projects located at the Dassault Service Center. The Aircraft Maintenance Technician performs troubleshooting and maintenance of mechanical, hydraulic, electrical, and/or electronic systems on all models of Falcon Jet corporate aircraft. Responsibilities: • Ensure that you present yourself in a professional manner and appearance in a day-to-day contact with customers, guests and co-workers., • Perform tasks as required by the work scope with efficiency and to quality standards and utilize the applicable technical data relative to work performed including but not limited to maintenance and inspection, servicing and lubrication, troubleshooting, repair and modifications, fueling and de-fueling., • Be thoroughly familiar with the Quality Control systems and procedures of the Repair Station/Quality Control Manual relative to the scope of the normally assigned duties, • Perform at maximum efficiency by effective use of available resources, • Possess a working knowledge of the Federal Aviation Regulations and in particular, CFR parts 43, 91, and 145; and 135 as required, • Complete aircraft maintenance paperwork and forms in accordance with methods of execution outlined in the RSM/QCM, • Support Aircraft Crew Chief with the shift turnover requirements as outlined in the RSM/QCM, • Collaborate and cooperate with the Customer Project Supervisor to achieve the on time and on budget objectives of the work scope, • Perform daily activities toward providing services and deliverables to the customer that meet and exceed customer satisfaction expectations, • Maintain good housekeeping practices by utilizing a 5S system of sort, set in order, shine, standardize and sustain, • Focus on Human Factors in the workplace and drive to zero defects in workmanship and safety, • Observe and administer company rules and regulations and safety policy and standard operating procedures, • Support the corporate mission and vision through achievement of department goals and objectives, • High school diploma or equivalent., • FAA Mechanic's Certificate with Airframe and Powerplant rating required., • Minimum three (3) years' experience in business jet maintenance environment, preferably on Falcon aircraft., • Valid and active driver's license required, • APU Operation qualified., • Demonstrated organizational and interpersonal skills., • Strong problem solving and analytical skills., • Read and interpret aircraft diagrams, charts and schematics., • Lift up to 50 pounds., • Must not be allergic to fuels, oils, hydraulic fluids and cleaning solvents., • Work and bend in a confined workspace., • Must have manual dexterity required for technician., • Must be able to repeatedly enter and exit aircraft using stationary steps/stairs., • Knowledgeable and experienced using computers and aircraft software., • FAA Inspection Authorization (Desired)., • Successful completion of at least one (1) Falcon Initial Maintenance School (Desired)., • Engine Run & Taxi qualified on business jet aircraft, preferably on Falcon aircraft (Desired). We are hiring for several positions with distinct shift schedules. Please indicate your preferred shift when applying. • 1st Shift: Monday through Friday, 7:30 AM – 4:00 PM, • 2nd Shift: Monday through Thursday, 2:00 PM - 12:30 AM The compensation for this position typically falls between $29 and $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Do you have five (5) years direct broad experience in aviation, strong skills in reading and interpreting blueprints and engineering drawings, and are able to use quantitative data in a labor scheduling model to assist management in resolving complex decision-making situations? If so, APPLY TODAY! Join Dassault Falcon Jet newly opened state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, FL is seeking a full time Planner who is responsible for creating, maintaining, and publishing maintenance plans that meet DFJ Service Network operational needs while maximizing yield and reducing costs. The Planner plans and schedules both short and long-term maintenance requirements while working closely with our customers and internal cross-functional teams. Develops work packages by considering specific requirements such as maintenance skills, tooling, materials, available man-hours, and down-time. Provides feedback on compliance and inspection programs by monitoring, analyzing, communicating, and elaborating individual customer projects into executable game plans that can be handed off to Operations for execution. RESPONSIBILITIES: • Maintains current database of work center capacities, shifts, and manpower requirements for jobs and projects., • Performs "simulated" and "what if" capacity planning for Sales as needed., • Develops and sequences tasks utilizing flow charts to efficiently accomplish the aircraft maintenance work scope., • Recommends possible solutions to capacity problems to Customer Program Management and Operations Management (special shifts, contractors, etc.), • Identifies material requirements on sold work packages and orders accordingly based on JIT (just in time) principles. Tracks and reports any material delivery issues to all departments prior to aircraft arrival., • Defines, monitors, and revises standard resource requirements such as tooling, technical data, labor hours and materials for tasks associated with maintenance activities., • Assembles the work order package including but not limited to maintenance forms, inspection forms, service bulletins, checklists, technical data and engineering., • Communicates with customers, vendors, maintenance operations managers and various other department managers to support customer needs as required., • Assist Sales in determining special lead time or down time requirements for proposed projects; provides data input to support preparation of sales proposals., • Provides Gant Charts to Sales, P.M.'s or A.O.M.'s for proposals and planning., • Monitors actual performance vs. planned performance by work center, to keep capacity planning current., • Observes company rules and regulations and safety policy as they apply to the Planning and Scheduling Department., • Business school education or equivalent. (Associate degree desired)., • Five (5) years direct broad experience in aviation., • A&P License Preferred, • Read and interpret blueprints and engineering drawings., • Ability to organize and follow multiple complex projects., • Mathematical competency., • Strong personal computer knowledge, including MS Office and scheduling software experience required., • Able to work independently., • Able to use quantitative data in a labor scheduling model to assist management in resolving complex decision-making situations. The compensation for this position typically falls between $75,000 to $99,000 per year. This position is not eligible for overtime. This position may be eligible for a sign on bonus or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Job Summary Performs Inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to work performed for the work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Assurance Inspector may also perform aircraft maintenance (including Inspections), preventative maintenance and alterations and assist customers with technical and operational support relative to the customer’s aircraft. Job Duties & Responsibilities • Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality., • Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data., • Maintains complete knowledge of the work scope of assigned aircraft, • Determines airworthiness requirements for aircraft undergoing inspection (reference FAR 43.15), • Verifies inspection program is applicable to assigned aircraft, • Performs conformity inspections for certification projects, • Supports import/export airworthiness approval, • Verifies technical data acceptable to and/or approved by the FAA, has been used to provide inspection and approval for return to service with respect to work performed, • Insures corrective action(s) provides for complete correction of discrepancy, • Provide(s) record(s) of major repairs and alterations (reference FAA 337), • Provides maintenance record entries with respect to work performed, • Contributes to a positive work environment while maintaining the utmost level of professionalism at all times., • Able and willing to mentor others., • Works assigned shift and unscheduled overtime as-needed or requested., • Ability to travel and perform AOG maintenance., • Regularly communicates directly with customers and vendors., • Excellent written and verbal communication skills., • Maintains a clean and organized work area at all times and adheres to company dress standards., • High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs., • FAA Airframe and Powerplant certificate required, • 5+ years experience in aircraft maintenance and alteration of turbine aircraft preferred, • Experience with the methods, practices, techniques, aids, equipment and tools used to perform aircraft maintenance and alterations. Required, • Thoroughly familiar with the applicable regulations and proficient in the use of the various inspection methods, practices, techniques, aids, equipment and tools appropriate for the work being performed and approved for return to service. Required, • Specific working knowledge of FAR 43, FAR 145, FAR 91., • Intermediate computer skills., • FAA Inspection Authorization (IA) preferred., • Previous FAR Part 135 Experience (Including RTS) preferred., • Previous FAR 91.411 & 91.413 Experience preferred., • Office environment, • Possible hangar and ramp environments with variable temperature range, • Physical Requirements, • Ability to wear and utilize personal protective equipment, • Must be able to lift up to 50 pounds without assistance, • Must be able to lift and carry up to 100 pounds with assistance, • Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. The compensation for this position typically falls between $42 and $52 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Job Summary Performs Inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to work performed for the work that the Service Center (FAA Certificated Repair Station) is rated. The Quality Assurance Inspector may also perform aircraft maintenance (including Inspections), preventative maintenance and alterations and assist customers with technical and operational support relative to the customer’s aircraft. Job Duties & Responsibilities • Accomplishes all work while following company and industry safety standards while maintaining the highest level of quality., • Adheres to all FAA Regulations, the Repair Station Quality Control Manual (RSQCM), and all other approved data., • Maintains complete knowledge of the work scope of assigned aircraft, • Determines airworthiness requirements for aircraft undergoing inspection (reference FAR 43.15), • Verifies inspection program is applicable to assigned aircraft, • Performs conformity inspections for certification projects, • Supports import/export airworthiness approval, • Verifies technical data acceptable to and/or approved by the FAA, has been used to provide inspection and approval for return to service with respect to work performed, • Insures corrective action(s) provides for complete correction of discrepancy, • Provide(s) record(s) of major repairs and alterations (reference FAA 337), • Provides maintenance record entries with respect to work performed, • Contributes to a positive work environment while maintaining the utmost level of professionalism at all times., • Able and willing to mentor others., • Works assigned shift and unscheduled overtime as-needed or requested., • Ability to travel and perform AOG maintenance., • Regularly communicates directly with customers and vendors., • Excellent written and verbal communication skills., • Maintains a clean and organized work area at all times and adheres to company dress standards., • High school graduate or equivalent with additional courses in aircraft maintenance in recognized service or technical school programs., • FAA Airframe and Powerplant certificate required, • 5+ years experience in aircraft maintenance and alteration of turbine aircraft preferred, • Experience with the methods, practices, techniques, aids, equipment and tools used to perform aircraft maintenance and alterations. Required, • Thoroughly familiar with the applicable regulations and proficient in the use of the various inspection methods, practices, techniques, aids, equipment and tools appropriate for the work being performed and approved for return to service. Required, • Specific working knowledge of FAR 43, FAR 145, FAR 91., • Intermediate computer skills., • FAA Inspection Authorization (IA) preferred., • Previous FAR Part 135 Experience (Including RTS) preferred., • Previous FAR 91.411 & 91.413 Experience preferred., • Office environment, • Possible hangar and ramp environments with variable temperature range, • Physical Requirements, • Ability to wear and utilize personal protective equipment, • Must be able to lift up to 50 pounds without assistance, • Must be able to lift and carry up to 100 pounds with assistance, • Comfortable in tightly enclosed areas, heights involving lifts and ladders, as well as, flying. The compensation for this position typically falls between $42 and $52 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job DescriptionAre you an Avionics Technician with two (2) years’ experience as an Avionics Technician in a business jet environment? If so, APPLY TODAY! Join Dassault Falcon Jet recently opened state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking full time Avionics Technicians who will be primarily responsible for maintaining and installing avionics systems and performing complex troubleshooting, testing and repair of avionics systems and equipment. RESPONSIBILITIES: • Operates various Digital and Analog Test Sets, Primarily for Line Troubleshooting of Complex Avionics Systems., • Make minor metal repairs such as extracting bad screws, replacing racks, etc., • Swings and compensates aircraft compass systems., • Must be able to Troubleshoot Aircraft Systems using aircraft wiring diagrams and manufacturers installation manuals., • Installs, and performs ground and flight checks of all avionics systems., • Performs all work to FAA and Dassault standards., • Ensure that you present yourself in a professional manner and appearance in day-to-day contact with customers, guests and co-workers., • Operates various Digital and Analog Test Sets, Primarily for Line Troubleshooting of Complex Avionics Systems., • Make minor metal repairs such as extracting bad screws, replacing racks, etc., • Swings and compensates aircraft compass systems., • Must be able to Troubleshoot Aircraft Systems using aircraft wiring diagrams and manufacturers installation manuals., • Installs, and performs ground and flight checks of all avionics systems., • High school graduate or equivalent required., • Graduate from an electronics/avionics technical school or equivalent experience., • Minimum two (2) years’ experience as an Avionics Technician in a business jet environment, • Supplies own tools required to perform job., • Must be able to effectively communicate with both internal and external customers., • This position requires successful completion of the Melbourne Airport background check process. The compensation for this position typically falls between $29 and $50 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Do you have five (5) years structural repair experience with Flaps, Slats, intakes, and leading edges? Do you work from blueprints or sketches? Do you conduct repairs, modifications, or installation of metal and composite structural components? Do you have an FAA Airframe license? If so, APPLY TODAY! Join Dassault Falcon Jet recently opened a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking full time Airframe Structures Technician who will be responsible for the proper fabrication and installation of metal goods in aircraft components, aircraft, or related products, including but not limited to Flaps, Slats, intakes, leading edges, slats, etc. In addition, working from blueprints, drawings, sketches, or verbal instructions; repairs, modifies, or installs metal and composite structural components to DA drawings, Engineering dispositions, DFJ-WC, and government standards. Job Duties & Responsibilities • Performs structural repairs/alterations in accordance with FARs, manufacturer’s technical publications and drawings and within DFJ-WC schedules and FAA standards and regulations., • Manufactures form and molding blocks., • Fabricates sheet metal parts requiring flanges and contouring., • Produce and fabricate tooling and parts to aid in the repair of components or aircraft parts for MRO and SRC., • Lays out and forms doublers, stringers, angles, channels, zee sections and hat sections., • Parts fabrication, layout, drilling, riveting, deburring, polishing, and installation of parts., • Knowledge of close tolerances for interference fit fasteners., • Bearing and bushing replacement as required., • Sets up and operates heavy machine tools including but not limited to power brakes, drill press, and shears., • Ability to execute assigned tasks from a set of drawings, SRM, sketches, or verbal instructions., • Completes daily tasks with accuracy and completeness., • Works in a safe manner in accordance with OSHA and Company Procedures advising the Supervisor immediately of any unsafe or hazardous equipment or working facility., • Maintains a clean working area., • Completes his/her work within allocated target hours and on schedule., • Occasionally, performs fabrication and installation of Avionics STC systems, flight controls and associated airframe systems., • Performs other duties as assigned., • Maintains knowledge of current EPA regulations and applicable F.A.R.s., • High school graduate or equivalent preferred with additional courses in structural repair and alteration work in recognized service or technical school., • Must have five (5) years structural repair experience or equivalent., • Must be able to work from blueprints or sketches., • F.A.A. “Airframe” license preferred. The compensation for this position typically falls between $29 and $45 per hour. This position is eligible for tech leveling to reflect varying levels of experience. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us. Take the Leap: Ready to elevate your career? Join us and be part of a team that keeps the aviation world moving. ????????️

Job Description Have you managed a team of A&P Mechanics effectively and professionally and have an A&P license? If so, join our Falcon team! APPLY TODAY!! Dassault Falcon Jet recently open a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility in Melbourne, Florida. Dassault Falcon Jet serves customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, FL is seeking a full-time Aircraft Maintenance Crew Lead. The Crew Lead is responsible for the efficient execution of the work scope. The Crew Lead ensures tasks, within the scope of their normally assigned duties, are performed using established standards of quality and airworthiness. The Crew Lead is responsible to the accountable Manager for Repair Station Operations conducted under 14 CFR 145. JOBS and RESPONSIBILITIES • Effectively teams with the respective Maintenance Supervisor and Quality Assurance Inspector assigned to the aircraft to efficiently execute the aircraft work scope and communicates at all levels of the organization and with customers as directed., • Attends the customer debrief as directed., • Assigns technicians to perform the tasks as directed by the Crew Chief. Assigns QC Inspector to perform inspection of work performed as directed by the Maintenance Supervisor., • Ensures the use of applicable technical data, including but not limited to, the methods, techniques and practices prescribed in the current manufacturer’s maintenance manual., • Ensures that personnel assigned to perform tasks are qualified to perform the task and identifies training requirements., • Ensures that aircraft maintenance paperwork and forms are completed in accordance with methods of execution outlined in the RSQCM., • Provides for the shift turnover requirements as outlined in the RSQCM, • Collaborates and cooperates with the assigned Maintenance Supervisor to achieve the on time and on budget objectives of the work scope., • Collaborates and cooperates with the assigned QA Inspector to achieve aircraft approval for return to service., • Drives daily activities toward providing services and deliverables to the customer that meet and exceed customer satisfaction expectations., • Ensures that crews maintain good housekeeping practices by utilizing a 5S system of “sort, set in order, shine, standardize, and sustain.” Takes immediate action to maintain a clean safe environment., • Maintains a focus on Human Factors in the workplace and drives to zero defects in workmanship and safety., • Supports the Maintenance Error Analysis Process (MEAP)., • Contributes to the annual training needs assessment exercise required by the Repair Station Training Program., • Supports the corporate mission and vision through achievement of department goals and objectives, contributes to process improvement and the development of strategies that improve customer service and the maintenance process., • Tool Control: It is the responsibility of every employee to inventory their tools at the end of their shift and whenever moving from one aircraft project to another. It is also the responsibility of the employee to return company tools to the tool room at the end of each shift or prior to moving to another aircraft. Proper tool control is mandated by the FAA and our Repair Station and Quality Control Manual. It is imperative to have the correct tool logged to the aircraft that it is being used on for calibration usage and recall purposes., • Perform other related duties as assigned by the respective Maintenance Supervisor., • High school diploma or equivalent, • A & P license, • Internal employees must be a Tech Level 2 or higher at the time of application to be considered., • Valid and active driver's license, • Falcon experience, • Proven ability to lead and direct aircraft technicians and mechanics., • Ability to organize and assign technical work and follow up complex projects. The compensation for this position typically falls between $40 and $51 per hour. This position is eligible for overtime and may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Dassault Falcon Jet recently opened its state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. This advanced facility supports Dassault’s commitment to the highest standards of safety, quality, and customer service across the Western Hemisphere. Dassault Falcon Jet in Melbourne, Florida is seeking a full-time Chief Inspector & NDT Program Administrator. This is a senior quality leadership role responsible for the oversight, administration, and execution of the Repair Station Quality System and the Non-Destructive Testing (NDT) Program. JOB SUMMARY: Acting under the direction of the MLB Quality Assurance Manager and the DFJ NDT Program Manager (Responsible Level III), the Chief Inspector & NDT Program Administrator serves as the local authority for regulatory compliance, airworthiness, inspection, and non-destructive testing activities. This position ensures adherence to applicable Federal Aviation Regulations (FARs), NAS 410 / EN 4179 standards, and Company policies, while promoting aviation safety, operational efficiency, and customer satisfaction. ESSENTIAL DUTIES AND RESPONSIBILITIES: Quality Assurance & Chief Inspector Responsibilities • Serve as the local authority on all applicable Federal Aviation Regulations, Repair Station Quality Control Manual (RSQCM), and company quality policies., • Plan, organize, staff, supervise, and control the Quality department, ensuring effective use of QA and Inspector resources., • Administer and continuously improve the Repair Station Quality System, including internal quality audits, corrective actions, and regulatory compliance., • Interpret regulatory requirements and translate them into company policies and procedures., • Ensure all technical data, manuals, and inspection programs are current, applicable, and properly utilized., • Oversee recordkeeping requirements, inspector stamps, repair station rosters, and documentation for major repairs and alterations (FAA Form 337)., • Coordinate with Operations, Quality Assurance, and Customer Project Management to achieve on-time, on-budget, and high-quality outcomes., • Promote aviation safety, human factors awareness, and a zero-defect culture; enforce housekeeping standards using 5S principles., • Support and administer foreign certification attainment and renewal requirements as applicable., • Coordinate and support the Repair Station Training Program, including training needs assessments, scheduling, and maintenance of technician training records., • Administer and maintain the Repair Station NDT Program in accordance with NAS 410, EN 4179, and company NDT Program Manual requirements., • Perform and oversee Level II NDT inspections and examinations in Ultrasonic Testing, Eddy Current, and Penetrant methods, as qualified and authorized., • Ensure NDT tooling, equipment, calibration status, and associated documentation are maintained in compliance with program requirements., • Verify that FAA-acceptable or approved technical data is used to support inspection, conformity, and return-to-service determinations., • Support import/export airworthiness approvals and certification projects, including conformity inspections., • Maintain NDT proficiency, certifications, vision requirements, and audit readiness per written practice and program policies., • Supervise, mentor, and develop QA/QC and NDT inspectors, including oversight of training, qualification, documentation, and coordination of examinations with the NDT Program Manager., • Monitor inspector performance to ensure compliance with roles, responsibilities, and regulatory requirements., • Assign and perform inspection and maintenance tasks within the approved work scope, ensuring quality standards and regulatory compliance., • FAA Airframe & Powerplant (A&P) Certificate or eligibility for FAA Repairman Certificate under FAR Part 65., • Minimum 5 years of supervisory experience in aircraft maintenance or equivalent management experience., • Minimum 3 years of experience in aircraft maintenance, alteration, and/or NDT inspections., • NDT Level II certification in Ultrasonic Testing (UT), Eddy Current (ET), and Penetrant Testing (PT) in accordance with NAS 410 or EN 4179., • Formal NDT training, NDT diploma, or documented military NDT experience., • Demonstrated working knowledge of FAR 43, FAR 145, FAR 91 Subpart E, RSQCM/RSM, and Repair Station forms., • Ability to interpret technical data and determine airworthiness and return-to-service eligibility., • Excellent written and verbal communication skills; strong customer service orientation., • Proficiency in MS Word; basic to intermediate proficiency in MS Excel and PowerPoint., • Ability to work independently, supervise teams, and lead with a proactive, “can-do” attitude., • FAA Inspection Authorization (IA)., • Falcon aircraft experience., • Previous experience with airframe structures and composite NDT., • Hangar, ramp, and industrial environments with variable temperatures., • Extended hours and directed overtime as required., • Occasional travel (up to approximately 10%)., • Ability to lift up to 50 pounds and perform physical tasks such as walking, climbing, kneeling, and standing for extended periods, with or without reasonable accommodation. The compensation for this position typically falls between $90,900 and $125,000 per year. This position is not eligible for overtime. This position may be eligible for a sign on bonus, shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Job Description Do you have two (2) years of experience in an aircraft or aeronautical environment, are Hazardous Shipping Certified and have working knowledge of Quality Inspection processes and procedures? If so, APPLY TODAY! Join Dassault Falcon Jet who is building a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models. Dassault Falcon Jet in Melbourne, Florida is seeking a full time Incoming Inspector, who will be responsible for the inspection of components, materials, and products into the Repair Station Quality System including cosmetic acceptability. Verify parts and components are in compliance to purchase order, repair order, and work order requirements including Certification documents. Maintains quarantine area, brings suspected unapproved parts to the attention of the Quality Assurance Manager, and upon direction of the Materials and Purchasing Manager mutilates scrap material and maintains log per Repair Station Quality Control Manual. RESPONSIBILITES: • Accountable to the Material and Purchasing Supervisor, • Accountable to the Quality Assurance Manager for Repair Station Operations conducted under FAR Part 145, • Perform shipping/receiving inspections in compliance with company Quality Manuals and Procedures., • Perform complete shipping/receiving inspections in compliance with governmental regulatory procedures and specifications., • Use electrostatic protection type equipment., • Perform inspections of incoming purchased parts and products., • Be familiar with relative FAA/EASA regulations and requirements., • Prepare necessary customer and/or company documents., • Complete and maintain reports and records as required., • Assist other personnel on specific job assignments as requested by the Materials & Purchasing Manager., • Maintain a clean and organized work area., • May perform inspections of outgoing parts and products from DAS., • May perform as received material Burn testing., • Work in a safe manner in accordance with OSHA and company safety procedures., • Provide backup support to Material Warehouse personnel, as needed., • Provide backup support to Tool Room personnel, as needed., • High School diploma or equivalent., • Two (2) years of experience in an aircraft or aeronautical environment., • Hazardous Shipping Certified., • Must have working knowledge of Quality Inspection processes and procedures., • Must possess above average verbal, written, and interpersonal communication skills., • Must possess well-developed critical thinking, logic, and analytical skills., • Ability to work from heights or small, enclosed areas for short periods of time with or without reasonable accommodation., • Able to climb, stoop, bend, kneel, and/or work from unleveled surfaces with or without reasonable accommodation., • Must possess computer literacy with the ability to learn new applications., • Highly motivated individual who can work unsupervised for an extended period., • Must be able to lift to 30 pounds with or without reasonable accommodation., • Team player that exhibits and models Dassault Falcon Jet Core Values & Attributes., • Previous Quality Control experience., • Forklift experience., • Corridor software experience - preferred This position requires successful completion of the Melbourne Airport background check process. COMPENSATION AND BENEFITS: The compensation for this position typically falls between $22 - $30 per hour. This position is eligible for overtime. This position may be eligible for shift differential or relocation assistance. Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift. Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more. We are committed to finding the best, brightest, and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us. Take the Leap: Ready to elevate your career? Join us and be part of a team that keeps the aviation world moving. ????????️

Job DescriptionCompany Description Smiths Detection is a global leader in detection and screening technologies for the protection of people and assets, supporting safety, security and freedom of movement in today’s world. At Smiths Group plc, we apply leading-edge technology to design, manufacture and deliver market-leading innovative solutions that meet our customers' evolving needs, and touch the lives of millions of people every day. We are a FTSE100, global business of around 14,600 colleagues, based in 50 countries. Our solutions have a real impact on lives across the planet, enabling industry, improving healthcare, enhancing security, advancing connectivity and supporting new homes. Our products and services are often critical to our customers’ operations, while our proprietary technology and high service levels help create competitive advantage. We welcome colleagues with a curious mind, who are happy with responsibility, enjoy a challenge and are attracted by the idea of working at a business with an almost 170-year history of innovation, and five global divisions, all experts in their field. We believe that different perspectives and backgrounds are what make a company flourish and are proud to be a company with values grounded in integrity, respect, ownership, customer focus, and passion. Job Description This position requires daily travel to locations in and around the Melbourne Metro area, including the airport. Troubleshoots, services, installs (deploys) and repairs Trace, X-Ray, CT X-Ray and Cargo Inspection equipment at customer sites. Maintains field service log and filing system to properly initiate, organize and maintain all field service and job files until work is completed Demonstrates initiative and dedication through positive use of downtime and an overall willingness and eagerness to consistently exceed customer and company requirements. Conducts follow up calls with the customer to ensure satisfaction of work. SPECIFIC DUTIES, ACTIVITIES AND RESPONSIBILITIES INCLUDE BUT ARE NOT LIMITED TO: • Responsible for meeting daily service repair needs and driving customer satisfaction, • Installs, repairs and maintains equipment in the field; provides customer training as required., • Documents all inspections, maintenance, repair work and submits paperwork in a timely basis, • Order, install, and return parts and manages repair parts cycle time, • Reviews all logs for open issues and prepares formal reports to customers as necessary., • Participates in Service Sales opportunities and assists with promoting and implementing revenue programs., • Ensures that tools and test equipment are properly maintained and calibrated, • Assesses product/equipment performance based on field support data; recommends modifications or improvements., • Seeks to provide technical support to customers and other service professionals as required., • May participate in site surveys, pilot program service activities, attend meetings, • Possesses basic technical knowledge on the company’s Trace and X-Ray technologies., • Maintains clear and concise business communication, both oral and written, • Establishes and maintains a close relationship with senior level FSE’s and Product Managers in order to support the needs of the customer and remain aware of current technical trends., • Exercises every available measure to control and minimize costs., • Travel, overtime and work hours other than Monday-Friday may be required., • Comply with and ensure department compliance with Company health, safety and environmental policies., • Comply with all applicable U.S. export control and security regulations., • Other duties as required.Qualifications Education/Training: Associate’s Degree/Related Trade Certification (electrical, electronic, mechanical)/Military Training (electrical, mechanical, electronics). (Equivalence achieved through comparative work and life experience of 1-3 years is acceptable work experience in a related electrical or mechanical field service role). Computer literacy; competency in use of all programs within MS Office Suite and aptitude for learning specialized software programs. Experience: Minimum of 1-3 years experience directly involved in troubleshooting and field repair of electrical and electronic systems and equipment. Knowledge/Skills: Individuals shall possess excellent communications skills and have a strong orientation for customer focus and teamwork. Must be responsive to all customer issues at all times. Must be willing & able to travel at short notice. Supervises: While supervision is not considered a primary responsibility of this position, there may be instances where supervision of others on a project basis may be required Background: This position requires Sensitive Security Information (SSI) access and vetting via the TSA. Applicant must successfully pass a federal background investigation. OTHER REQUIREMENTS: • Possess excellent organizational, communication, interpersonal skills with the ability to multitask several projects at once., • Excellent customer service skills and the ability to handle stressful situations., • Self-motivated, reliable, and accountable individual, • Possess excellent telephone skills, • Must be able to lift/carry 80 lbs., • Must be confident in the operation of carts, hoists, davit cranes, pallet jacks or other devices as defined in the manuals and Technical Advisory documentation., • Job requires full body mobility Work environment is typically considered to be wherever the customer of concern is located. Service will typically be rendered at airports, correctional facilities, courthouses, cruise ships or other locations as required. SDI is a Federal Contractor and a drug-free workplace. By submitting an application, I confirm that I understand that the Company has a right to require me to submit to a drug test prior to employment and at any time during my employment, to the extent permitted by law. Additional Information We offer… Join us and we’ll help build your career, with excellent training and opportunities for career growth across the business, both locally and globally. You’ll experience an inclusive environment, with strong leadership and a focus on safety and wellbeing. You’ll also have the flexibility to choose from a wide range of benefits to suit your lifestyle, offering you and your family support from a health and wellbeing, financial and lifestyle perspective. Join us and work for a world-leader, with the benefits and training to reward your dedication and skills. Be part of a team where we are making the world a safer place. HIRING SALARY RANGE: $47,700.00 - $111,300.00/yr (Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant and alignment with internal and market data.) This role offers a competitive Business Profit Plan. This position includes a competitive benefits package. For details, please visit the Reward & Benefits tab on our main careers page at . All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Equal Employment Opportunity PostersIf you’d like to view a copy of the company’s affirmative action plan or policy statement, please email . If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail call toll-free 877-703-1029. This email and phone number is created exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only messages left for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. Smiths Detection, Inc. participates in the Electronic Employment Verification Program. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation – including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career’s website (Careers - Smiths Group plc)

Consistently demonstrates effective sales and service skills by meeting established goals.Consults with members regarding SCCU products and services and recommends additional offerings to meet member needs.Periodically serves as floor manager to as Customer Service, Teller, Member Service, Retail, B

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen

Customer Support / Remote] - Anywhere in U.Up to $50K per year + bonus / Medical, dental & vision / 401k match / PTO - As a Customer Service Rep at Legrand, you will: Process customer orders via phone, email, fax, EDI, and other channels; Provide accurate pricing, availability, and scheduling inform

Customer Support / Remote] - Anywhere in U.Competitive salary / Health, dental & vision / 401k - As a Customer Service Rep at Curri, you will: Facilitate deliveries from booking to successful drop-off and everything in between; Provide best-in-class support for our customers and drivers via chat and

Customer Support / Remote] - Anywhere in U.Medical, dental & vision / 401k - As a Customer Service Rep at DGI Supply, you will: Handle customer and sales interactions via phone, email and tickets within the Customer Care Box; Process requests for quotations, order entry and product questions from cu

Call Center / Remote] - Anywhere in U.Competitive pay + performance-based incentives / Paid training / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Sagility, you will: Provide exceptional customer service to clients through various communication channels such as phone, email,

Customer Support / Remote] - Anywhere in U.Health, dental & vision / 401k match / PTO - As a Customer Service Rep at Ferguson, you will: Utilize your excellent communication skills to provide top-notch customer service to clients via phone, email, and chat; Solve customer inquiries and issues in a t

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Independence Pet Holdings, you will: Respond to 70-90 phone calls per day, providing exceptional customer service in every interaction; Answer customer emails promptly, addres

Customer Support / Remote] - Anywhere in U.Medical, dental & vision / PTO / Paid training - As a Customer Service Rep at Assurant, you will: Handle inbound customer calls and/or e-mails with empathy and professionalism; Resolve issues, answer questions, and provide proactive solutions; Document inte

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Lansing Building Products - - Responsibilities: Greet customers, pick tickets, and load/unload customer and company trucks; Utilize handheld RF scanners to move, track, and manage products through our Warehouse Management System (TWL); Verify accuracy of orders picked and shipments received; Lift a

Walmart - 845 Palm Bay Rd Ne - [Retail Associate / Store Receiver / Team Member / up to $21-hr] - As a Stocker / Unloader at Walmart, you'll: Ensure customers can find all of the items they have on their shopping list; Unload trucks; Move and sort products in the backroom; Stock products on shelves;

Working at Reece & Fortiline means being part of a growing global company that brings our purpose and values to life every day.We celebrate our team members living our values and provide opportunities to build a long and remarkable career.We're proud to support essential industries helping bring cle