Trabajos assembler en Aurora, ColoradoCrear alertas

Job Description Wanco Inc. is an industrial manufacturer seeking an experienced Wiring Assembler to measure, cut, terminate, route, and tie wires to form wire harnesses, then attach them to components, plugs, or connectors using soldering or crimping. Also conduct continuity and functional tests, inspect for defects, and perform repairs as required. What you need to have: · Technical Skills: Proficient in reading technical drawings and understanding color codes. · Technical skills: Strong understanding of assembly processes, familiarity with hand and power tools, and knowledge of relevant safety and quality standards. · Manual Dexterity: Possess good hand-eye coordination for precise work with small components and hand tools. · Attention to Detail: A high degree of precision is needed for accurate wiring and assembly. · Teamwork: Ability to work effectively as part of a production team. · Experience: One or more years’ experience in a wiring production or assembly environment. What we would like you to have: · English and Spanish speaking · ISO 9001:2015 experience. · Lean Manufacturing experience. Duties and Responsibilities: This includes but is not limited to: · Assembly: Route, cut, wrap, and tie wires according to specifications. · Installation: Install wires and or assembled harnesses, components, and sub-assemblies into electronic devices or equipment. · Testing: Perform continuity and functional tests to ensure the wiring assemblies meet specifications. · Soldering & Crimping: Attach wires to terminals, connectors, and components using a soldering iron or crimping device. · Inspection & Quality Control: Visually inspect wiring and assemblies for correct components, proper connections, and to detect defects. · Maintenance: Clean and perform preventative maintenance on tools and equipment. · Documentation: Read and interpret blueprints, wiring diagrams, specifications, and work orders. · Repair: Troubleshoot and repair damaged harnesses and electrical assemblies. Physical Requirements: The ability to work in a manufacturing setting, often while standing, using standard wiring equipment, and adhering to PPE requirements. Reporting: This position has no direct reports and reports to operations management. Salary Range: $21 - $23/hr Depending on experience Benefits: Insurance (Medical, Dental, Life, 401k). Paid time off and holidays. Eligible to participate in Wanco’s standard benefits package. Wanco Inc. Address: 15800 E. 40th Ave. Aurora, CO 80011 | 303-427-5700 | wanco.com Company DescriptionWanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future. Wanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.Wanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future.\r\n\r\nWanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Job Summary Responsible for assembling electrical generating equipment. Reads and interprets instructions, assembles parts and tools, and fits electronic components together. Wanco is looking for a motivated and accomplished Assembler with both Electrical and Mechanical experience to join a growing production team that builds diesel generator sets in our Aurora location. As a new team member, you will be trained in all the functions necessary to build our equipment. You will be cross-trained through all the job stations to enable you to take on any role. Each job station requires attention to detail and dedication to quality. Duties and Responsibilities • Display a positive attitude and practice a strong work ethic that reflects Wanco's mission, philosophy, and goals, • Assemble engines, alternators, sheet metal, and components. Modify and install electrical wiring on power systems up to 480AC volts, • Assemble trailer frames including axles, taillight harnesses, wheels, tires, hitches., • Assemble and install mechanical assemblies, including drilling, fitting, bolting, and general assembly, operating cranes and hoists, • After cross-training, support peers in work that may be outside your or their core skill sets, • Identify and communicate opportunities for improving quality, safety, and productivity, • Accurately capture material and parts consumption using provided computer systems and software, • Wiring and electrical assembly, • Mechanical assembly, including small, fragile parts and large assemblies such as engines and trailer frames, • Work safely around running engines and electrical systems up to 480VAC, • Proficiency with blueprints, schematics, and wiring diagrams, • Strong teamwork and communication skills, • Basic computing skills, including Microsoft Office Word and Excel, • Basic understanding of diesel engine parts and operation, • Troubleshooting using a multimeter, • Familiarity with torque specifications and proper fastener techniques, • Familiarity with overhead crane operation (training available), • Typical start time: 6:00 AM, • Typical end time: 4:30 PM, • The ability to lift a minimum of 20 pounds in awkward positions, • The ability to lift a minimum of 50 pounds from the floor to the waist, • Must be able to climb ladders, climb up, and work from elevated platforms, • Protective equipment must be worn in the performance of some duties Salary Range: $20-$22.00 per hour based on qualifications Location: 15800 E. 40th Ave. Aurora, CO 80011 Company DescriptionWanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future. Wanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.Wanco is the industryʼs leading manufacturer of highway safety and traffic control products. Innovation and new product development have made us what we are, and will continue to carry our reputation forward, well into the future.\r\n\r\nWanco provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. \n Scope: Perform assembly operations on electronic components and subassemblies in accordance with company, IPC and J-standards. The main focus of this position is hand-soldering. This is a 3rd shift position with the hours for this position are 10:30 PM - 7:00AM, Sun night - Fri morning. Duties and Responsibilities: \n • Assemble parts into repetitive and non-complex units or subassemblies, utilizing hand tools and soldering iron.\n, • Will require some use of voltmeters, scales, holding fixtures, bench tools, automated and manual soldering equipment and special fixtures.\n, • Assembly operations are typically performed under a stereo microscope.\n, • Follow written/oral instructions from process engineers, manufacturing engineers, and supervisor.\n, • May prepare and assemble PC boards, Perform component preparation, Dispense / Apply adhesives , and Utilize various tools to perform mechanical assembly.\n, • Inspect work to ensure that it meets all requirements.\n, • Comply with and support all department and corporate policies and procedures included but not limited to Safety, Security and ESD.\n, • Inspect product at various stages of process.\n, • Create NCMR (non-conforming material review) and perform root cause analysis as needed.\n Essential Knowledge and Skills: \n • Ability to follow detailed written and verbal instructions.\n, • Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.\n, • Proficient use and familiarity with hand tools.\n, • Ability to run automatic soldering equipment.\n, • Ability to determine if product meets company's quality standards.\n, • Must have excellent time management skills and ability to prioritize projects.\n, • Ability to work with fine-pitch components.\n, • Ability to understand manufacturing documentation.\n, • Requires basic mechanical and good soldering skills.\n, • Ability to read, understand and follow assembly instructions, including visual aids and drawings.\n Education: • High School Diploma or Equivalent\n Preferred Experience:, • 1 - 5 years of solder/complex assembly experience.\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $40,210 - $63,558 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job DescriptionWere looking for a skilled Cabinet Assembler to join our team. In this role, youll be responsible for assembling cabinet parts into finished units, ensuring each piece fits accurately and meets quality standards. Youll work with hand and power tools to build cabinets with precision. Strong manual dexterity and technical know-how are key. You should be able to read and follow blueprints, diagrams, and assembly instructions with accuracy. The goal is to build well-constructed, high-quality cabinets by assembling individual components into complete products. Responsibilities • Read and comprehend instructions and follow established procedures, • Collect all material and equipment needed to begin the process, • Take precision measurements to ensure perfect fit of components, • Select or modify components according to measurements and specifications, • Align material and put together parts to build more complex units, • Check output to ensure highest quality, • Maintain equipment in good condition, • Keep records of production quantities and time, • Report on issues, malfunction or defective partsSkills, • Proven experience as assembler, • Technical knowledge and ability to read blueprints, drawings etc., • Ability in using tools (e.g. clamps) and machines (e.g. presses), • Good understanding of quality control principles, • Good communication skills (verbal and written), • Excellent hand-eye coordination and physical condition, • High school diploma; Higher degree from a technical school will be appreciatedQualifications, • Trade school, high school diploma or GED, • 1-2 years of cabinetry assembly, • Proficiency in using hand tools and power tools, • Experience in construction, carpentry, and quality control, • Strong communication skills, • Knowledge of trim carpentry and frame carpentry techniques

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. \n Scope: Perform assembly operations on electronic components and subassemblies in accordance with company, IPC and J-standards. The main focus of this position is hand-soldering. This is a 3rd shift position with the hours for this position are 10:30 PM - 7:00AM, Sun night - Fri morning. Duties and Responsibilities: \n • Assemble parts into repetitive and non-complex units or subassemblies, utilizing hand tools and soldering iron.\n, • Will require some use of voltmeters, scales, holding fixtures, bench tools, automated and manual soldering equipment and special fixtures.\n, • Assembly operations are typically performed under a stereo microscope.\n, • Follow written/oral instructions from process engineers, manufacturing engineers, and supervisor.\n, • May prepare and assemble PC boards, Perform component preparation, Dispense / Apply adhesives , and Utilize various tools to perform mechanical assembly.\n, • Inspect work to ensure that it meets all requirements.\n, • Comply with and support all department and corporate policies and procedures included but not limited to Safety, Security and ESD.\n, • Inspect product at various stages of process.\n, • Create NCMR (non-conforming material review) and perform root cause analysis as needed.\n Essential Knowledge and Skills: \n • Ability to follow detailed written and verbal instructions.\n, • Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.\n, • Proficient use and familiarity with hand tools.\n, • Ability to run automatic soldering equipment.\n, • Ability to determine if product meets company's quality standards.\n, • Must have excellent time management skills and ability to prioritize projects.\n, • Ability to work with fine-pitch components.\n, • Ability to understand manufacturing documentation.\n, • Requires basic mechanical and good soldering skills.\n, • Ability to read, understand and follow assembly instructions, including visual aids and drawings.\n Education: • High School Diploma or Equivalent\n Preferred Experience:, • 1 - 5 years of solder/complex assembly experience.\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $40,210 - $63,558 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. \n Scope: Perform assembly operations on electronic components and subassemblies in accordance with company, IPC and J-standards. The main focus of this position is hand-soldering. This is a 3rd shift position with the hours for this position are 10:30 PM - 7:00AM, Sun night - Fri morning. Duties and Responsibilities: \n • Assemble parts into repetitive and non-complex units or subassemblies, utilizing hand tools and soldering iron.\n, • Will require some use of voltmeters, scales, holding fixtures, bench tools, automated and manual soldering equipment and special fixtures.\n, • Assembly operations are typically performed under a stereo microscope.\n, • Follow written/oral instructions from process engineers, manufacturing engineers, and supervisor.\n, • May prepare and assemble PC boards, Perform component preparation, Dispense / Apply adhesives , and Utilize various tools to perform mechanical assembly.\n, • Inspect work to ensure that it meets all requirements.\n, • Comply with and support all department and corporate policies and procedures included but not limited to Safety, Security and ESD.\n, • Inspect product at various stages of process.\n, • Create NCMR (non-conforming material review) and perform root cause analysis as needed.\n Essential Knowledge and Skills: \n • Ability to follow detailed written and verbal instructions.\n, • Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.\n, • Proficient use and familiarity with hand tools.\n, • Ability to run automatic soldering equipment.\n, • Ability to determine if product meets company's quality standards.\n, • Must have excellent time management skills and ability to prioritize projects.\n, • Ability to work with fine-pitch components.\n, • Ability to understand manufacturing documentation.\n, • Requires basic mechanical and good soldering skills.\n, • Ability to read, understand and follow assembly instructions, including visual aids and drawings.\n Education: • High School Diploma or Equivalent\n Preferred Experience:, • 1 - 5 years of solder/complex assembly experience.\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $40,210 - $63,558 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Eaton's ES AMER ARS division is currently seeking a Mechanical Assembler (1st Shift). The hourly rate for this position is $22 per hour. This position is also eligible for a variable incentive program. HOURS: 7AM - 3:30PM Why work at Eaton? Below are a few of the outstanding benefits we offer: \n • Health benefits and vacation time - available to use on day one of your employment!\n, • Paid holidays\n, • Bi-Weekly pay\n, • Career progression opportunities to cross-train in different departments and increase compensation.\n, • Overtime opportunities\n, • Retirement benefits\n, • Paid Parental Leave\n What you'll do: The Production Technician is responsible for a wide range of skills including: wire, assemble, fit and mount sub-assemblies, components, and standard fixed assemblies in electrical control equipment. Perform assembly required for test preparation and final inspection. Use established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled. Perform all assignments within acceptable quantity and perfect quality requirements in keeping within assigned functions. \n • Assemble panelboards and/or switchboards to customer specification based on electrical drawings, manufacturing schematics, and work instructions with the use of hand and power tools.\n, • Inspect and test finished products to maintain quality standards and ensure conformance with specifications and codes.\n, • Use various tools, such as wire strippers and plyers to perform the electrical wiring assembly of panelboards and/or switchboards.\n, • Maintain expected progress of jobs in the area of assignment and communicate problem areas or part shortages.\n, • Receive and put away material; prepare finished products for shipment. \n, • Perform Lean Initiatives by recommending suggestions for improvement related to quality, work processes, and environmental safety and health. Maintain equipment, tools, and work area per established 5S guidelines.\n, • Cross-train and flex across functions based on development and business needs.\n\n Qualifications: Basic Qualifications: \n • Minimum one year of experience in an assembly related role with the use of hand and/or power tools (experience in automotive repairs, construction, carpentry, or other assembly type environments will be considered) or completion of a one-year Technical School diploma from an accredited institution. \n, • No relocation benefit is being offered for this position. Only candidates that currently reside within 50 miles of the work location will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation. \n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n\n Preferred Qualifications: \n • High school diploma or GED equivalent from an accredited institution.\n, • CNC bus fabrication, press brake, or related experience.\n, • Experience with wiring diagrams, schematics, and power flow to install correct wires.\n, • Experience with measuring tools, torque tolerance, and hardware assembly. \n, • Experience using various tools including: manual/electric tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, tape measure, storage/packaging materials and prescribed safety equipment.\n\n Skills: Position Criteria: \n • Must be able to interact and contribute in a small team environment and ability to flex according to production demands.\n, • Lift 35lbs. on a regular basis.\n, • Must be able to work overtime as required.\n, • Must be able to communicate effectively in all written and verbal formats (speech, writing, reading).\n, • Ability to follow manufacturing drawings and instructions.\n, • Keep yourself and teammates aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety.\n, • Actively participate in health and safety training and demonstrate competency based on training received.\n, • Attend and actively participate in site meetings and trainings. \n\n The application window for this position is anticipated to close on JANUARY 20, 2026 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at We're always looking for talented individuals to join our team. Whether you're an experienced manufacturing professional or just starting your career, TTM offers a supportive workplace where all skillsets can thrive. Why Join Us? At TTM, we believe in offering our employees an environment where they can make a real impact on the work we do. Here's a look at what we provide our employees to set them up for success. \n • \nCareer Development: We invest in your growth - our Operator Advancement Program supports your goals. We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program. TTM promoted 68% of applicants in the program's first year!\n, • \nCompetitive Compensation: We offer a competitive package that reflects your skills and experience along with annual compensation reviews to ensure your growth is aligned with your performance and market trends.\n, • \nComprehensive Benefits and PTO: Including health, dental, and vision insurance to keep you at your best. Enjoy 10 paid holidays and 3 weeks of paid time off annually to recharge.\n\n TTM strives to invest in our team members at all levels - starting on your first day. To support the growth and development of our new hires, this position is eligible for a 90 Day Evaluation that includes a pay increase if key performance indicators are met. Scope: Perform assembly operations on electronic components and subassemblies in accordance with company, IPC and J-standards. The main focus of this role is mechanical assembly. 1st shift hours are 6:30 AM - 3:00 PM, M-F. This job is located at 10720 Bradford Rd, Littleton CO, 80127. Duties and Responsibilities: \n • Assemble parts into repetitive and non-complex units or subassemblies, utilizing hand tools and soldering iron.\n, • Will require some use of voltmeters, scales, holding fixtures, bench tools, automated and manual soldering equipment and special fixtures.\n, • Assembly operations are typically performed under a stereo microscope.\n, • Follow written/oral instructions from process engineers, manufacturing engineers, and supervisor.\n, • May prepare and assemble PC boards, Perform component preparation, Dispense / Apply adhesives , and Utilize various tools to perform mechanical assembly.\n, • Inspect work to ensure that it meets all requirements.\n, • Comply with and support all department and corporate policies and procedures included but not limited to Safety, Security and ESD.\n, • Inspect product at various stages of process.\n, • Create NCMR (non-conforming material review) and perform root cause analysis as needed.\n, • Read, interpret and follow detailed work instructions and assembly drawings.\n\n Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Essential Knowledge and Skills: \n • Ability to perform basic and routine repetitive mechanical assembly operations on components and subassemblies using fixtures, screwdrivers, etc.\n, • Proficient use and familiarity with hand tools.\n, • Ability to run automatic soldering equipment.\n, • Ability to understand manufacturing documentation.\n, • Requires basic mechanical and good soldering skills.\n, • Ability to read, understand and follow assembly instructions, including visual aids and drawings.\n, • May require limited soldering skills under magnification.\n, • Excellent hand/eye coordination.\n, • Ability to use (hold, lift, maneuver, etc.) hand tools and power tools.\n, • Ability to maneuver tiny objects such as screws, wires, etc.\n\n Education and Experience: Education: • 0-1 years of manufacturing experience\n Preferred Experience: \n • Previous PCB manufacturing\n, • Hand soldering under a microscope\n\n #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $36,800 - $58,168 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Eaton's ES AMER ARS division is currently seeking a Mechanical Assembler (1st Shift). The hourly rate for this position is $22 per hour. This position is also eligible for a variable incentive program. HOURS: 7AM - 3:30PM Why work at Eaton? Below are a few of the outstanding benefits we offer: \n • Health benefits and vacation time - available to use on day one of your employment!\n, • Paid holidays\n, • Bi-Weekly pay\n, • Career progression opportunities to cross-train in different departments and increase compensation.\n, • Overtime opportunities\n, • Retirement benefits\n, • Paid Parental Leave\n What you'll do: The Production Technician is responsible for a wide range of skills including: wire, assemble, fit and mount sub-assemblies, components, and standard fixed assemblies in electrical control equipment. Perform assembly required for test preparation and final inspection. Use established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled. Perform all assignments within acceptable quantity and perfect quality requirements in keeping within assigned functions. \n • Assemble panelboards and/or switchboards to customer specification based on electrical drawings, manufacturing schematics, and work instructions with the use of hand and power tools.\n, • Inspect and test finished products to maintain quality standards and ensure conformance with specifications and codes.\n, • Use various tools, such as wire strippers and plyers to perform the electrical wiring assembly of panelboards and/or switchboards.\n, • Maintain expected progress of jobs in the area of assignment and communicate problem areas or part shortages.\n, • Receive and put away material; prepare finished products for shipment. \n, • Perform Lean Initiatives by recommending suggestions for improvement related to quality, work processes, and environmental safety and health. Maintain equipment, tools, and work area per established 5S guidelines.\n, • Cross-train and flex across functions based on development and business needs.\n\n Qualifications: Basic Qualifications: \n • Minimum one year of experience in an assembly related role with the use of hand and/or power tools (experience in automotive repairs, construction, carpentry, or other assembly type environments will be considered) or completion of a one-year Technical School diploma from an accredited institution. \n, • No relocation benefit is being offered for this position. Only candidates that currently reside within 50 miles of the work location will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation. \n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n\n Preferred Qualifications: \n • High school diploma or GED equivalent from an accredited institution.\n, • CNC bus fabrication, press brake, or related experience.\n, • Experience with wiring diagrams, schematics, and power flow to install correct wires.\n, • Experience with measuring tools, torque tolerance, and hardware assembly. \n, • Experience using various tools including: manual/electric tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, tape measure, storage/packaging materials and prescribed safety equipment.\n\n Skills: Position Criteria: \n • Must be able to interact and contribute in a small team environment and ability to flex according to production demands.\n, • Lift 35lbs. on a regular basis.\n, • Must be able to work overtime as required.\n, • Must be able to communicate effectively in all written and verbal formats (speech, writing, reading).\n, • Ability to follow manufacturing drawings and instructions.\n, • Keep yourself and teammates aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety.\n, • Actively participate in health and safety training and demonstrate competency based on training received.\n, • Attend and actively participate in site meetings and trainings. \n\n The application window for this position is anticipated to close on JANUARY 20, 2026 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Eaton's ES AMER ARS division is currently seeking a Mechanical Assembler (1st Shift). The hourly rate for this position is $22 per hour. This position is also eligible for a variable incentive program. HOURS: 7AM - 3:30PM Why work at Eaton? Below are a few of the outstanding benefits we offer: \n • Health benefits and vacation time - available to use on day one of your employment!\n, • Paid holidays\n, • Bi-Weekly pay\n, • Career progression opportunities to cross-train in different departments and increase compensation.\n, • Overtime opportunities\n, • Retirement benefits\n, • Paid Parental Leave\n What you'll do: The Production Technician is responsible for a wide range of skills including: wire, assemble, fit and mount sub-assemblies, components, and standard fixed assemblies in electrical control equipment. Perform assembly required for test preparation and final inspection. Use established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled. Perform all assignments within acceptable quantity and perfect quality requirements in keeping within assigned functions. \n • Assemble panelboards and/or switchboards to customer specification based on electrical drawings, manufacturing schematics, and work instructions with the use of hand and power tools.\n, • Inspect and test finished products to maintain quality standards and ensure conformance with specifications and codes.\n, • Use various tools, such as wire strippers and plyers to perform the electrical wiring assembly of panelboards and/or switchboards.\n, • Maintain expected progress of jobs in the area of assignment and communicate problem areas or part shortages.\n, • Receive and put away material; prepare finished products for shipment. \n, • Perform Lean Initiatives by recommending suggestions for improvement related to quality, work processes, and environmental safety and health. Maintain equipment, tools, and work area per established 5S guidelines.\n, • Cross-train and flex across functions based on development and business needs.\n\n Qualifications: Basic Qualifications: \n • Minimum one year of experience in an assembly related role with the use of hand and/or power tools (experience in automotive repairs, construction, carpentry, or other assembly type environments will be considered) or completion of a one-year Technical School diploma from an accredited institution. \n, • No relocation benefit is being offered for this position. Only candidates that currently reside within 50 miles of the work location will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation. \n, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc.\n\n Preferred Qualifications: \n • High school diploma or GED equivalent from an accredited institution.\n, • CNC bus fabrication, press brake, or related experience.\n, • Experience with wiring diagrams, schematics, and power flow to install correct wires.\n, • Experience with measuring tools, torque tolerance, and hardware assembly. \n, • Experience using various tools including: manual/electric tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, tape measure, storage/packaging materials and prescribed safety equipment.\n\n Skills: Position Criteria: \n • Must be able to interact and contribute in a small team environment and ability to flex according to production demands.\n, • Lift 35lbs. on a regular basis.\n, • Must be able to work overtime as required.\n, • Must be able to communicate effectively in all written and verbal formats (speech, writing, reading).\n, • Ability to follow manufacturing drawings and instructions.\n, • Keep yourself and teammates aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety.\n, • Actively participate in health and safety training and demonstrate competency based on training received.\n, • Attend and actively participate in site meetings and trainings. \n\n The application window for this position is anticipated to close on JANUARY 20, 2026 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

National Assemblers - - Responsibilities: Assemble bikes, grills, furniture, and a variety of products with precision and craftsmanship; Use your reliable transportation to reach designated retail locations; Build a reputation for excellence by delivering exceptional service and ensuring 100% custo

National Assemblers - - Responsibilities: Assemble bikes, grills, furniture, and a variety of products with precision and craftsmanship; Use your reliable transportation to reach designated retail locations; Build a reputation for excellence by delivering exceptional service and ensuring 100% custo

PrideStaff - - Responsibilities: Build, repair, and update machines involved in the assembly process; Select manufacturing methods and technology for assembly; Perform quality checks and follow safety procedures; Prepare and assemble sub-assemblies from engineering prints; Support production tasks

Boise Cascade - 11011 East 104th Avenue - Responsibilities: Construction of doors and windows made to order; Check product and raw material specifications; Transport raw materials and finished products to and from machinery, equipment and storage area; Apply and understand mathematical calculations

National Assemblers - - Responsibilities: Assemble furniture (bed frames, desks, chairs, etc.Mount and install TVs, pictures, and other home fixtures; Set up entertainment systems, soundbars, and streaming devices; Provide top-notch customer service and educate customers; Maintain accurate records

Electronic Assembler - 1st Shift. Assemblers are expected to be flexible to stop and start work orders as requested to adjust for priority orders. May be assigned to a team with other assemblers to complete a customer work order.

Electronic Assembler - 1st Shift. Assemblers are expected to be flexible to stop and start work orders as requested to adjust for priority orders. May be assigned to a team with other assemblers to complete a customer work order.

Prior construction experience is helpful.

Responsibilities for Assembler 3:. Basic Qualifications for Assembler 3:. Preferred Qualifications for Assembler 3:.

Follett Denver currently has an opportunity for an Ice Maker Evaporator Assembler to join our team!. The Ice Maker Evaporator Assembler will assemble the ice maker evaporator units for use in the refrigeration system by cleaning, brazing, welding, soldering, and foaming components. Join our team as

Follett Denver currently has an opportunity for an Ice Maker Evaporator Assembler to join our team!. The Ice Maker Evaporator Assembler will assemble the ice maker evaporator units for use in the refrigeration system by cleaning, brazing, welding, soldering, and foaming components. Join our team as

Follett Denver currently has an opportunity for an Ice Maker Evaporator Assembler to join our team!. The Ice Maker Evaporator Assembler will assemble the ice maker evaporator units for use in the refrigeration system by cleaning, brazing, welding, soldering, and foaming components. Join our team as

We provide operators and assemblers at all levels the opportunity to certify their skills and build their career with us up to 3 times a year by applying to the OAP program.

Shift: 3rd Shift Monday - Friday 11pm- Finish Compensation: $760 - $1,000+/weekly Warehouse Associate Aurora, CO Compensation: $760 - $1,000+/weekly 3rd Shift Monday - Friday 11pm- Finish People want to work at Capstone because of our high-performance culture.We build strong relationships, challenge

Avenue5 Residential - - Responsibilities: Address apartment and property maintenance duties as directed by supervisor and/or property manager; Perform repairs across electrical, plumbing, appliances, flooring, carpentry, HVAC, and grounds maintenance; Perform general carpentry duties such as wallbo