Aws jobs in Chesapeake, VirginiaCreate job alerts

Structural Shop Foreman - Welding/Plate Purpose: Colonna's Shipyard is seeking an Structural Foreman to oversee the Structural Shop in Norfolk, VA. Position Summary: First level on-site supervisory role that assigns, coordinates, trains, and evaluates team of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge to support production in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. Essential Duties and Responsibilities: Key responsibilities include: • Manages key activities in the employee lifecycle for all direct reports (timekeeping, job assignments, training, performance management, coaching/counselling, supervision, etc.) and ensure employees have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • Breaks broader production strategies down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc., • Directly supervise steel employees in work daily tasks to verify and ensure conformance to specifications, drawings, procedures, and quality, schedule, and budget., • Interpret company policy to workers and enforce safety and environmental regulations, specifications, blueprints, sketches, and work orders to employees., • Recommend measures to improve production methods, equipment performance, and quality of customer product., • Suggest changes in working conditions and use of equipment to increase efficiency of workers., • Carry out supervisory responsibilities in accordance with the organization's policies and applicable laws., • Plan, assign, and direct all work., • Address complaints and resolve them as needed., • Planning and preparing a fabrication shop schedule for all known and anticipated work, based on staffing and material resources., • Layout mild steel and stainless steel heavy and light structure, frames, skids, piping and other projects for fabrication., • Monitor and support all shop projects maintaining high quality, on time delivery, safety and staying within budget., • Understanding and adhering to the defined scope of work., • Follow company procedures regarding material procurement and return; pre-planning equipment and material needs., • Provides daily updates to management to support POD development and execution., • Review project specifications/SOWs and order all project materials in accordance with contract requirements and associated references., • Generates and submits production reports, meeting all technical/customer requirements, to management., • Ensure tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Responsible for project's chemist certificate, daily CPs, and hot work permits., • Manages and initiates QA/Customer calls out and attends/executes TIP inspections., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must be able to understand job specifications, drawings, and corresponding technical references., • Must have regular, reliable attendance., • Must be experienced in QA/QC programs and procedures., • Must have expert level knowledge of all welding methods, procedures, and quality control., • Must have working knowledge of design principles, AMSE/AWS codes, and safety standards., • Ability to obtain and maintain access to Government Facilities (DBIDS)., • Must be an US Citizen.\n\n Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Job Description Location: Hampton Roads, Virginia (Norfolk, Newport News, Portsmouth, Chesapeake) Job Type: Full-Time | Long-Term Shipyard Projects Pay Range: Competitive pay + overtime opportunities We are seeking experienced Welders and Fitters to join our team supporting major shipyard projects in the Hampton Roads, VA area. This is a great opportunity to work on high-profile ship repair, shipbuilding, and industrial marine projects with steady work and career growth. Welder Duties: • Perform structural and pipe welding (MIG, TIG, Stick, Flux Core, SMAW) on steel and aluminum in a shipyard environment, • Read and interpret blueprints, drawings, and technical specifications, • Execute proper welding techniques and inspect welds for quality assurance, • Layout, position, and fit steel and pipe components for assembly and welding, • Use cutting torches, grinders, and measuring tools to ensure proper alignment, • Interpret shipyard blueprints, drawings, and schematics, • Minimum 2 years of shipyard, marine, or industrial welding/fitting experience, • Ability to pass welding and/or fitting tests as required by the shipyard, • Familiarity with OSHA safety standards and shipyard safety practices, • Must be able to work in confined spaces, at heights, and onboard naval/commercial vessels Higher positions and pay rates available for Leads and those with specialized skills and certifications* Company DescriptionSince 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.”Since 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.”

Job Description DEVSECOPS ENGINEER DEFTEC delivers mission-critical solutions through skillfully delivered services and innovative products. We are inspired by our clients' critical missions and driven to provide the most effective solutions to execute their missions, operational challenges, and requirements. Our dedicated, experienced, and talented employees work closely with our clients to ensure the delivery of exceptional services and products. POSITION OVERVIEW This role Designs, deploys, and operates containerized services using orchestration frameworks to ensure scalability, reliability, and security across cloud environments. Implements Infrastructure as Code (IaC), site reliability engineering (SRE) practices, and zero-trust principles to support resilient, high-throughput architectures. Works within Agile and DevSecOps frameworks to automate infrastructure, enforce compliance, and manage secure service communication, identity, and access across modern cloud and hybrid systems. JOB RESPONSIBILITIES: • Deploy and operate containerized services using orchestration frameworks to ensure scalability and resilience., • Automate infrastructure through Infrastructure as Code (IaC) to provide consistent and repeatable environments., • Deploy and monitor workloads in cloud environments (AWS, Azure, Google Cloud, VMware, OpenStack)., • Implement site reliability engineering (SRE) and observability practices to ensure resilience, monitoring, logging, metrics, and distributed tracing., • Support high-throughput and service-oriented architectures, ensuring resilient and scalable deployments., • Deliver incremental capabilities in Agile and DevSecOps environments following frameworks such as Scrum, SAFe, or Kanban., • Design and manage secure networking and service meshes (TLS, Istio, Linkerd, API gateways) to ensure encrypted and reliable service-to-service communication., • Apply zero-trust principles and compliance automation to enforce security policies and validate system compliance., • Manage identity and access using secure methods for secrets, tokens, certificates, and least-privilege access control. Required Qualifications: • Minimum 4 years of experience with containerization and orchestration (Docker, Kubernetes, OpenShift)., • Minimum 4 years of experience in designing and maintaining CI/CD pipelines with automated testing and security validation., • Experience with Infrastructure as Code (Terraform, Ansible, Helm, Pulumi)., • Experience deploying and securing workloads in hybrid/public cloud environments (AWS, Azure, Google Cloud, VMware, OpenStack)., • Experience implementing site reliability engineering and observability practices (Prometheus, Grafana, ELK/Loki, OpenTelemetry)., • Experience implementing scalable, resilient, high-throughput systems and service oriented architectures., • Experience delivering capabilities in Agile/DevSecOps environments (Scrum, SAFe, Kanban)., • Experience designing and managing secure networking and service mesh (TLS, Istio, Linkerd, API gateways).. DEFTEC offers a comprehensive whole-life benefits package that includes medical, dental, vision, holiday, paid time off, 401K with a match, life insurance, short/long-term disability, and educational reimbursement. The DEFTEC team comprises professionals who make a difference daily in crucial national security missions. Our leadership knows that this happens by employing a diverse team that is well cared for. Our top priority is our employees, making DEFTEC an ideal workplace. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Please get in touch with if you require reasonable accommodations. DEFTEC is a Drug-Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. AAP/EEO Statement DEFTEC Corp is an Equal Opportunity and Affirmative Action Employer and prohibits discrimination and harassment of any type based on actual or perceived race, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), gender, gender identity, and gender expression, religious creed, disability (mental and physical) including HIV and AIDS, medical condition (cancer and genetic characteristics ), genetic information, age, marital status, civil union status, sexual orientation, military and veteran status, denial of family and medical care leave, arrest record and/or any other characteristic(s) protected by federal, state or local law. This policy applies to all terms of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, training, compensation, benefits, employee activities, and general treatment during employment. Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. Job Posted by ApplicantPro

Job Description We are seeking an experienced, detail-oriented and technically skilled Systems Security Analyst to join our dynamic team for an onsite 12 month opportunity. This role plays a pivotal part in strengthening our IT infrastructure, safeguarding sensitive data, and ensuring compliance with various cybersecurity frameworks. We are seeking a proactive professional who can adeptly navigate the ever-evolving landscape of cyber threats and deliver scalable, secure solutions that align with operational goals. This is an onsite role. Responsibilities • Network Security: Strong understanding and experience with secure configuration, auditing, and monitoring of network devices. Ability to implement security controls and recommend corrective actions that align with cybersecurity policies and standards., • Operating Systems Security: Strong understanding and experience with Operating System security for servers, IoT, and mobile operating systems. Ability to identify gaps and recommend corrective actions that align with cybersecurity policies and standards., • Security Tools and Platforms: Experience with managing SOC/SIEM platforms for real-time threat detection. Use vulnerability scanners and endpoint protection tools (e.g., MDR/DR solutions)., • Threat Detection and Incident Response: Experience with conducting threat response actions and incident response investigations. Experience with system hardening and patch management., • Access Control Management: Strong understanding of IAM, MFA, SSO, and Zero Trust principles. Experience with Active Directory using RBAC and least-privilege access., • Cloud Security: Strong understanding of securing AWS and Azure workloads using cloud-native tools and SaaS posture management. Ability to implement cloud-based security controls., • Risk Assessment and Governance: Experience with performing risk analysis using NIST 800-53, NIST CSF, HIPAA, CJIS, and PCI frameworks. Ability to develop mitigation strategies and implement security controls to ensure regulatory compliance. Qualifications • Strong analytical and problem-solving skills, with the ability to work independently and collaboratively across departments., • Bachelor’s degree in Cybersecurity, Computer Science, Information Technology, or related field (or equivalent experience), • Minimum of 3 years of experience in cybersecurity or systems analysis, • Strong understanding of security principles, tools, and frameworks, • Industry certifications preferred (e.g., CISSP, CEH, Security+, Azure Security Engineer)

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Summary: \n Use manual, semi-automatic, flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Perform (with training) Mechanized welding, cutting, and gouging processes as required by the work activity. \n Duties and Responsibilities: \n\n • Operate safety equipment and use safe work habits\n, • Weld components in 2G, 3G, 4G and 6G positions in at least 6 processes. Interpret a NAVSEA approved WPS (weld procedure specification)\n, • Use fillet weld gauges, V-WAC gauge, bridge cam gauge for first in line quality checks as welds are completed, according to the correct NAVSEA fabrication document\n, • Set up or program power supplies with the ability to identify correct support gear needed for any weld process necessary to complete work activity\n, • Proficient in oxy/fuel cutting, plasma cutting and CAC-A (carbon arc air) cutting, gouging, and scarfing of welds and beveling plates\n, • Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding\n, • Detect and troubleshoot faulty operation of equipment and/or defective materials and fix as required then notify management if replacement equipment is needed\n, • Operate manual or semi-automatic welding equipment to join weldments, using processes such as GTAW, GMAW, FCAW, GMAW-P, GMAW-S, SMAW, SAW, Mechanized processes, and ability to set up stud welding gun consistently using any combination of at least 6 processes\n, • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material\n, • Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with NAVSEA specifications\n, • Recognize, set up, and operate hand and power tools common to the welding trade, such as angle grinders, die grinders and needle scalers\n, • Lay out, position, align, and secure parts and assemblies, using straightedges, combination squares, calipers, and rulers\n, • Knowledge, ability, and proficiency in Fitting\n, • Ability to work consistently with employees and assign daily assignments and coordinate directly with a general foreman or production manager to maintain delivery of scheduled project milestones\n, • Expertly follows WPS to ensure proper mil-cert filler wire and base metals are used in accordance with the work activity to ensure NAVSEA specifications are properly met\n, • Ensure that level one material control requirements are followed in accordance with the applicable QSPM document\n, • Perform all duties on an expert and professional level while being able to mentor 2nd and 3rd class welders to minimize rework and maintain on-time and first-time quality\n, • Perform work outside of trade when required\n, • Proficient in mirror welding\n, • Work Experience: Minimum 5+ years related welding experience, or accredited Apprenticeship Program graduate or Journeyman Certificate accepted in lieu of work experience\n, • Ability to weld PQR plates to qualify the company for new processes\n, • Ability to be certified to the company's Level 2 VT NDT procedures\n, • Candidate must have prior experience and qualification in accordance with applicable NAVSEA documents\n, • Knowledge of a wide range of welding principles, processes, and techniques requiring correct weld joint identification in accordance with MIL-22D or AWS D1.1, and the ability to identify and correct weld defects prior to an NDT inspector showing up on site providing acceptable and constant first-time quality\n, • Ability to interpret weld symbols and identify necessary weld sizes and joint configuration\n, • Ability to maintain dimensions and tolerances to specifications\n, • Ability to weld dissimilar metals\n, • Ability to weld parts and structures that vary in size, shape, and thickness\n, • Must be able to obtain and maintain access to assigned military/government installations as required for work activity\n, • Preferred Qualifications: weld certifications in multiple processes as required per division needs\n, • 25' Tape\n, • 3 lb. hammer\n, • Burning goggles\n, • Striker\n, • Full Face Welding Shield\n, • Welding Gloves\n, • Slag Hammer\n, • Bottle Wrench\n, • 12" Crescent Wrench\n, • Wire Cutters\n, • Pliers\n, • Utility Knife\n, • Electrode holder (stinger)\n

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

Job Description Founded in 1995, ESN is a Small Disadvantaged Business (SDB), Service-Disabled Veteran-Owned Small Business (SDVOSB) and Veteran Owned Small Business (VOSB). ESN delivers trusted solutions that support our nation's defense. For more than two decades, we have been providing our military and government customers with mission-critical services including engineering and technical support, strategic and program management, testing and evaluation, operations support, and information technology. We are committed to proven, repeatable corporate quality management processes and are certified CMMI Maturity Level III - Services & ISO 9001:2015. We are seeking a Database Management Analyst III This job is located on-site Chesapeake, Virginia. ESN is seeking a Database Management Analyst III to support a contract with Naval Information Warfare Center (NIWC), Atlantic, in Norfolk, VA. The contract to support NIWC LANT consists of Independent Validation & Verification, Operations, Sustainment, and Installation support. The Maintenance Figure of Merit (MFOM) systems provides near real-time material-based readiness reporting to the Defense Readiness Reporting System-Navy (DRRS-N) and provides three additional primary capabilities to the Fleet including Ashore and Afloat systems. Experience Requirement: Education: Master's or Bachelor's degree. Experience: Ten (10) years with a Master's degree and fourteen (14) years with a Bachelor's degree of professional experience administering, testing, and implementing computer databases which may include coordinating computer database changes; implementing security measures to safeguard computer databases; and maintaining databases within an application area. Individual shall be capable of working individually or coordinating database development as part of a team. Specific Experience: Three (3) years' experience designing and maintaining AWS database solutions. Two (2) years' experience implementing, troubleshooting, and maintaining AWS Relational Database Service (RDS) solutions. Secret Security Clearance required. Job Posted by ApplicantPro

Job Description Founded in 1995, ESN is a Small Disadvantaged Business (SDB), Service-Disabled Veteran-Owned Small Business (SDVOSB) and Veteran Owned Small Business (VOSB). ESN delivers trusted solutions that support our nation's defense. For more than two decades, we have been providing our military and government customers with mission-critical services including engineering and technical support, strategic and program management, testing and evaluation, operations support, and information technology. We are committed to proven, repeatable corporate quality management processes and are certified CMMI Maturity Level III - Development/Services & ISO 9001:2015. ESN is seeking a Cybersecurity Engineer III. Position located on site in Chesapeake, VA. ESN is seeking a Cybersecurity Engineer III to support a contract with Naval Information Warfare Center (NIWC), Atlantic, in Norfolk, VA. The contract to support NIWC LANT consists of Independent Validation & Verification, Operations, Sustainment, and Installation support. The Maintenance Figure of Merit (MFOM) systems provide near real-time material-based readiness reporting to the Defense Readiness Reporting System-Navy (DRRS-N) and provides three additional primary capabilities to the Fleet including Ashore and Afloat systems. This support includes Cybersecurity, automated software testing, Scrum Master support, operating in the AWS Cloud, management of JIRA/Confluence, and project support. Position Description: · Planning, implementing, upgrading, and/or monitoring cybersecurity measures to improve cyber defense and maintain a cyber-resilient network. · Assessing cybersecurity vulnerabilities for risks and proposing and implementing remediation actions or risk mitigation strategies. · Ensuring appropriate security controls are in place that will safeguard digital files and electronic infrastructure. · Responding to computer security breaches to re-establish protections and making required reports. · Schedule is Monday through Friday with some weekend support required. · Performs other duties and works schedules as assigned by management, which may include changes to duties, responsibilities, or work hours as required to meet contractual obligations, mission requirements, or the needs of the organization. Minimum Requirements: · Required Education: Master's degree in Cybersecurity Engineering, Computer Engineering, Electrical Engineering, or Electronics Engineering. Or master's degree in mathematics with a concentration in computer science or equivalent. · Required certification - (Preferred certifications include AWS Security Certification Specialty and Certified Information Systems Security Professional. · Ten (10) years of experience preparing, implementing, and ensuring compliance with cybersecurity policy, to include Assessment and Authorization requirements. · Specific Experience - Three (3) years' experience conducting security audits on IT infrastructure and managing appropriate scans and STIG checklists. · Experience with the DoD Risk Management Framework (RMF), including execution of RMF Steps 1-6, development of security authorization packages (System Security Plan, POA&M, SAR, etc.), and coordination with Authorizing Officials (AO) and Security Control Assessors (SCA). · Familiarity with Navy use of eMASS for submission and tracking of RMF packages. · Experience supporting cybersecurity for Navy Ashore and Afloat platforms Active DoD Secret Clearance Required Job Posted by ApplicantPro

Job Description DATA AND AI SENIOR SOFTWARE DEVELOPER DEFTEC delivers mission-critical solutions through skillfully delivered services and innovative products. We are inspired by our clients' critical missions and driven to provide the most effective solutions to execute their missions, operational challenges, and requirements. Our dedicated, experienced, and talented employees work closely with our clients to ensure the delivery of exceptional services and products. POSITION OVERVIEW This role supports the design, development, and maintenance of robust, secure, and scalable software components to enable AI/ML capabilities within NATO's classified environments. The engineer will work closely with data scientists and AI specialists to implement and optimize algorithms, develop secure data pipelines, and integrate training and inference systems tailored to NATO-specific requirements. JOB RESPONSIBILITIES: • Design, develop, and maintain robust software components focusing on scalability, performance, and security., • Implement and optimise AI/ML algorithms, ensuring compliance with NATO-specific requirements., • Design and manage data pipelines for secure handling of classified data., • Develop, test, and integrate model training and inference systems., • Deploy and support AI applications within NATO's secure environments., • Collaborate with data scientists and AI engineers to enhance software practices., • Produce high-quality documentation for software components and processes., • Stay updated on software development, AI engineering, and NLP technologies., • Contribute to a culture of innovation within the Data Science & AI Branch. 10. Provide feedback about their work clearly and concisely. Required Qualifications: • A Bachelor's degree or higher from a nationally recognized/certified university in Computer Science, Software Engineering, or a related technical discipline OR a minimum of six years of professional experience in software development within the last eight years., • Proven experience as a software developer with a focus on implementation AI systems in the last four years., • Proficiency in modern software development and practices, including coding in Python, C++, Java, or similar programming languages., • Experience with AI/ML frameworks such as TensorFlow or PyTorch., • Demonstrated ability to develop and manage secure and scalable software systems for sensitive data., • Strong skills in database management, data processing, and cloud-based services, particularly with Amazon Web Services (AWS), Microsoft Azure., • Familiarity with containerization technologies and orchestration tools like Docker and Kubernetes., • Experience designing and testing APIs or system interfaces to integrate AI systems into larger infrastructures., • Understanding of NATO data security standards, privacy concerns, and secure coding practices., • Effective communication skills, to include writing technical documentation, code reviews, and collaboration with diverse stakeholders, including non-technical users., • Experience working within NATO environments or demonstrated familiarity with NATO processes, workflows, and organizational culture. DEFTEC offers a comprehensive whole-life benefits package that includes medical, dental, vision, holiday, paid time off, 401K with a match, life insurance, short/long-term disability, and educational reimbursement. The DEFTEC team comprises professionals who make a difference daily in crucial national security missions. Our leadership knows that this happens by employing a diverse team that is well cared for. Our top priority is our employees, making DEFTEC an ideal workplace. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Please get in touch with if you require reasonable accommodations. DEFTEC is a Drug-Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. AAP/EEO Statement DEFTEC Corp is an Equal Opportunity and Affirmative Action Employer and prohibits discrimination and harassment of any type based on actual or perceived race, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), gender, gender identity, and gender expression, religious creed, disability (mental and physical) including HIV and AIDS, medical condition (cancer and genetic characteristics ), genetic information, age, marital status, civil union status, sexual orientation, military and veteran status, denial of family and medical care leave, arrest record and/or any other characteristic(s) protected by federal, state or local law. This policy applies to all terms of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, training, compensation, benefits, employee activities, and general treatment during employment. Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. Job Posted by ApplicantPro

Job DescriptionONSITE Who We Are: Founded in 2007, SimIS Inc. is an innovative information technology solution Veteran Owned Small Business (VOSB) that models future environments, requirements, and capabilities, and then secures the enterprise from internal and external threats compliant with Federal, State, and industry standard governance to ensure client mission success. Our performance standard is “excellence,” with an outcomes-based, quality focus in our services and products, guided by our core values of honesty (in word and deed), relationships (confidence and trust with clients and partners), teamwork (shared goals, mission, and purpose), loyalty (allegiance to our client and team), and importance of others (work and win as a team). SimIS is currently recruiting for the listed position. Job Description: SimIS, Inc. is seeking a Senior Software Architect - Modeling & Simulation SME to lead the technical design and development of NATO's Next Generation M&S capability. This critical role combines advanced software architecture expertise with deep knowledge of military simulation systems to create the future of NATO's warfare simulation infrastructure. The successful candidate will architect distributed simulation environments that operate seamlessly from strategic planning down to tactical execution, enabling NATO forces to conduct complex multi-domain operations analysis and training. You will be the technical POC who helps transforms operational requirements into scalable, interoperable systems using cutting-edge distributed computing technologies and industry-standard protocols like DIS and HLA. This position requires a unique blend of technical leadership and domain expertise. You'll design high-level architectures that integrate legacy systems while building next-generation capabilities, ensuring real-time data exchange across global NATO commands. Your work will directly impact NATO's ability to plan, execute, and analyze military operations through advanced simulation technologies. The candidate performs the following specific assignments: • Design and implement high-level architecture for NATO's next-generation M&S systems, • Lead DIS protocol implementation and ensure compliance with IEEE standards, • Architect distributed simulation environments supporting multi-location exercises, • Develop software components for real-time simulation interaction and data exchange, • Create technical specifications for system interfaces and integration points, • Design scalable architectures supporting political-to-tactical level simulations, • Implement middleware solutions for simulation interoperability, • Lead technical reviews of architecture designs and code implementations, • Develop APIs for connecting legacy systems (JCTS, JTLS) to new architecture, • Optimize network performance for distributed simulation environments, • Design data synchronization mechanisms for distributed databases, • Create architectural patterns for turn-based and real-time simulation modesTechnical Architecture Focus:, • Define enterprise-level M&S architecture standards, • Implement publish-subscribe patterns for distributed event handling, • Design fault-tolerant systems for mission-critical simulations, • Develop microservices architecture for modular simulation components, • Create containerized deployment strategies for cloud and on-premise environmentsMinimum Experience Requirements within the last 5-10 years:, • At least 5 years developing distributed simulation systems using DIS/HLA protocols, • At least 3 years designing high-level system architectures for military simulation environments, • Proven experience architecting systems that support real-time interaction between multiple simulation nodes, • Experience developing APIs and interfaces for simulation interoperability, • Strong background in performance optimization for large-scale distributed systems, • Experience with both mission-level and campaign-level simulation development, • BS in Computer Science, Software Engineering, Computer Engineering, or related discipline.Experience Desired:, • Experience with NATO STANAG standards for simulation, • Knowledge of military C4ISR systems integration, • Familiarity with game engines adapted for military simulation, • Cloud architecture experience (AWS, Azure), • DevOps and CI/CD pipeline experience, • Strong analytical and problem-solving skills, • Excellent written and verbal communication abilities, • Expert knowledge of Distributed Interactive Simulation (DIS) protocol and High Level Architecture (HLA) standards, • Proficiency in multiple programming languages (C++, Java, Python), • Experience with simulation frameworks and middleware, • Strong understanding of network protocols and distributed computing, • Database design and data architecture experience, • Ability to manage multiple projects and priorities simultaneously, • Strong attention to detail and technical accuracyBenefits:, • Medical, Dental, and Vision, • Short-Term Disability (at no cost to you) & Long-Term Disability, • Life Insurance, • 401(k) Savings Plan, • Flex Spending Accounts, • Tuition Assistance Program, • Professional Development, • Paid Time Off (PTO), • 11 Federal Holidays each year SimIS, Inc. is an EOE / M / F / Disability / VET / Drug Free Employer Powered by JazzHR PBP65v67fh

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: • Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor., • Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations., • Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements., • Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data., • Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation., • Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive., • Immediately report all symptoms or suspected symptoms as early and accurately as possible., • Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation., • Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others., • Assist in the training of new personnel or tenders., • Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits., • Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site., • Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others., • Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance., • Ensure their medical certificates are up to date and recorded in their logbook., • Present their logbook to the Diving Supervisor on every job., • Maintain current certification in first aid and CPR., • Graduate of a professional diving school., • Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability., • Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld)., • Significant physical effort required. Significant exposure to physical risk., • Ability to pass annual diving physical., • Ability to obtain a U.S. Government security clearance. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Job Description We are seeking experienced QA Inspectors to join our team supporting shipyard and marine repair projects in the Hampton Roads area. The QA Inspector is responsible for ensuring all work meets customer, company, and regulatory standards through detailed inspections, testing, and documentation. Responsibilities: • Perform inspections and audits on marine and ship repair work, including structural, mechanical, and coating processes., • Verify compliance with drawings, specifications, and quality procedures., • Complete inspection reports, nonconformance documentation, and maintain accurate records., • Collaborate with production teams and supervisors to resolve quality issues promptly., • Support continuous improvement and safety initiatives across shipyard projects. Qualifications: • Prior experience as a QA Inspector in a shipyard, marine, or industrial environment., • Strong knowledge of ship repair standards, materials, and inspection methods., • Ability to read and interpret technical drawings and specifications., • Strong attention to detail and ability to document findings accurately., • Excellent communication and teamwork skills. Preferred Qualifications (a Plus): • Active DBIDS for shipyard access., • Certifications in NDT, coatings inspection (NACE/SSPC), or welding inspection (AWS-CWI)., • Experience working with NAVSEA, ABS, or military contracts. Benefits: • Competitive pay based on experience and certifications for position, • Medical including Dental and Tele-health- individual or family available, • Steady, long-term opportunities in the Hampton Roads shipyard community., • Supportive team environment with growth potential.Company DescriptionSince 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.”Since 1992, Tidewater Staffing, Inc. (TSI) has been providing unrivaled workforce solutions for our clients in the ship repair, warehousing, and light industrial/manufacturing industries. Through the years, we’ve dedicated ourselves to solving staffing challenges efficiently, economically, and with integrity by embodying our mission statement: “Put people to work. Do the right thing every day.”

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Description: We are seeking a highly skilled and experienced Welder III to join our team in Norfolk, VA. This position is responsible for performing complex welding tasks in support of ship repair and maritime fabrication projects. The ideal candidate will have a strong background in structural and pipe welding, a deep understanding of shipbuilding materials and techniques, and experience working in a shipyard or maritime industrial environment. The successful candidate will join our Fleet Services Group, performing various ship repair, modernization, and Alteration Installation Team (AIT) projects in support of U.S. Navy and commercial maritime clients. This role requires precision, efficiency, and a commitment to quality workmanship in both shop and shipboard environments. Essential duties & responsibilities include, but are not limited to the following: • Join, fabricate, and repair metal and other weldable material by applying appropriate welding techniques., • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems., • Fabricate and install fixtures and jigs required for welding process alignments., • Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process., • Select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD., • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards., • Install or repairs equipment, such as pipes, valves, floors and tank linings., • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., • Operate manual or semi-automatic welding equipment to fuse basic metal segments, using processes such as flux-cored arc, carbon arc, etc., • Weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions., • Document objective quality evidence to the requisite Continental Tide Forms., • Demonstrate the ability to estimate a drawing package / installation., • Utilize the following: SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Requirements: • Must possess a high school, trade or vocational school degree., • Target of 10 years plus of direct experience in ship repair and installation of HM&E systems and equipment., • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred., • Must have or have the ability to obtain a SECRET clearance., • Must have the ability to obtain base access and security credentials., • Travel may be required within and outside of the continental United States., • Due to export control regulations, this role is open to U.S. citizens only., • Possess basic and some advanced specialized welder's tools., • Exposure to open-air environments, including noisy, hot, and cold conditions., • Required to visit project sites aboard ships and rigs, both onshore and offshore., • Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required., • Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components., • Exposure to sound levels exceeding 100 decibels., • Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect marine components and systems, identify defects or irregularities, and safely operate tools and equipment., • May work in confined spaces with limited ventilation., • Requires prolonged periods of sedentary work, including sitting and/or standing., • May be required to operate machinery, power tools, and/or heavy equipment., • Must be able to communicate effectively to exchange and comprehend information., • Frequent exposure to extreme weather conditions, including high heat and extreme cold., • Must be able to lift and carry 30 lbs. or more, depending on the task requirements. Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you’re ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at . “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job Description Develop innovative solutions to enable secure and reliable operations of enterprise computer systems. Engineer, design, develop, and implement enterprise network cyber defense capabilities to prevent sophisticated cyber threats. Understand the fundamentals of layered defense and zero trust technologies. Prevent adversary network threats, identify advanced attack vectors, and thwart methods of exploitation. Work individually or in a small integrated team, and potentially lead a task, project, or team. Ensure project completion and provide guidance and direction to lower-level technicians, specialists, and managers. Provide expertise in the engineering design, development, direction, and implementation of enterprise network cyber defense capabilities. Apply familiarity with the utilization, configuration, and implementation of cyber defense capabilities, including web content filters, email security capabilities, Intrusion Detection System, Intrusion Prevention System, Host Based Security Systems, Security Incident and Event Management tools, Domain Name System security practices, advanced log analysis, network monitoring, network flow analysis, packet capture analysis, network proxies, firewalls, anti-virus capabilities, Linux or UNIX command line, and access control lists. Requirements • 4+ years of experience with privileged and elevated access operating, maintaining, and patching a DoD Assured Compliance Assessment Solution (ACAS), • Experience with Windows and Linux, including installing, configuring, or maintaining servers operating systems and applications, • Experience working with STIGs, SCAP, and cybersecurity best practices, • Active TS/SCI clearance; willingness to take a polygraph exam, • HS diploma or GED and 7+ years of experience conducting or supporting cyber engineering projects and activities, Associate’s degree and 5+ years of experience conducting or supporting cyber engineering projects and activities, Bachelor’s degree and 3+ years of experience conducting or supporting cyber engineering projects and activities, or Master’s degree and 1+ years of experience conducting or supporting cyber engineering projects and activities, • DoD 8570.01-M Information Assurance Technician (IAT) Level II Certification, including Security+ CE, CCNA-Security, GSEC, SSCP, CySA+, GICSP, or CND Certification, • Experience with Gigamon, Ansible, Encase, Fidelis, Suricata, Varonis, or VMWare tools, • Experience with Cloud Enterprise, authorizing cloud systems, and Cloud services, including AWS, Azure, or GCP, • Experience with big data analytics, machine learning, artificial intelligence, or anomaly detection, • Experience with Zero-Trust Architecture, • Experience with DevSecOps, CI/CD, IaC and CaC, IT Infrastructure Library, and IT Service Management, • Experience scripting in PowerShell and BASH command line interfaces or in Python or Perl scripting languages, • Experience in a consulting or client-facing environment, • Ability to automate security configurations of Linux and Windows systems, and recommend and implement remediations for non-compliant security controls, • Possession of excellent verbal and written communication skills, including using presentations to convey complex ideas to client and internal staff Essential Network Security (ENS) Solutions, LLC is a service-disabled veteran owned, highly regarded IT consulting and management firm. ENS consults for the Department of Defense (DoD) and Intelligence Community (IC) providing innovative solutions in the core competency area of Identity, Credential and Access Management (ICAM), Software Development, Cyber and Network Security, System Engineering, Program/Project Management, IT support, Solutions, and Services that yield enduring results. Our strong technical and management experts have been able to maintain a standard of excellence in their relationships while delivering innovative, scalable and collaborative infrastructure to our clients. Why ENS? • Free Platinum-Level Medical/Dental/Vision coverage, 100% paid for by ENS, • 401k Contribution from Day 1, • PTO + 11 Paid Federal Holidays, • Long & Short Term Disability Insurance, • Group Term Life Insurance, • Tuition, Certification & Professional Development Assistance, • Workers’ Compensation, • Relocation Assistance

Job Description DATA SCIENCE AND AI ENGINEER DEFTEC delivers mission-critical solutions through skillfully delivered services and innovative products. We are inspired by our clients' critical missions and driven to provide the most effective solutions to execute their missions, operational challenges, and requirements. Our dedicated, experienced, and talented employees work closely with our clients to ensure the delivery of exceptional services and products. POSITION OVERVIEW This role supports the development and operationalization of scalable data engineering and software infrastructure to enable AI and Large Language Model (LLM) capabilities across NATO's Allied Command Transformation (ACT) and the broader NATO Enterprise. Key responsibilities include building and maintaining robust data pipelines, optimizing data delivery systems, and integrating LLMs with operational environments through secure APIs and containerized microservices. JOB RESPONSIBILITIES: • Contribute to the development and implementation of an enabling data science and AI capability at HQ SACT and across the NATO Enterprise, with a specific focus on scalable data engineering and software systems to support AI initiatives., • Design, develop, and maintain robust data pipelines and architectures to manage the ingestion, transformation, and processing of structured and unstructured data for large Language Model (LLM)-based applications and other AI systems., • Lead efforts to optimize data delivery and automate data engineering processes, proposing enhancements to infrastructure to improve scalability, efficiency, and reliability in support of LLM deployments., • Build API-based infrastructure and frameworks that enable seamless integration of LLMs and ML models with operational systems, ensuring performance, security, and interoperability with NATO environments., • Support the development, testing, and validation of microservices and containerized applications to operationalize AI/ML capabilities, including deployment of LLM use cases within NATO., • Implement distributed data storage and processing systems (e.g., cloud-based or hybrid architectures) that align with NATO standards and enable scalable use of LLMs across the enterprise., • Develop tools and systems to improve data accessibility, enabling data scientists and analysts to efficiently interact with and query data for training, inference, and analytics., • Coordinate with data scientists, software engineers, and system architects to align data engineering workflows with broader AI/ML objectives, ensuring timely delivery of clean, high-quality data for LLM training and inference., • Establish mechanisms for real-time data processing and streaming, enabling LLMs to operate effectively in dynamic and responsive applications, such as operational decision support or strategic analysis., • Conduct preprocessing, cleansing, and transformation of raw data into formats optimized for training, fine-tuning, and inference within LLM infrastructure., • Implement robust monitoring, logging, and performance optimization tools for data pipelines and APIs, ensuring reliability and traceability of LLM-enabled workflows., • Collaborate with teams to support federated learning approaches and cross-domain data sharing, ensuring compliance with NATO data sovereignty, security, and ethical guidelines., • Provide subject matter expertise on data engineering and software development to (military and civilian) staff within HQ SACT or the NATO Enterprise, and develop proofs of concept for LLM-based applications as directed., • A Bachelor's degree or higher at a nationally recognized/certified university in Data Science, Data Analytics, AI engineering, or a related discipline such as Mathematics, Physics, Computer Science, Software Engineering OR 4 years minimum professional experience in the area of Data Science, including providing analysis and advice in the field of data science, within the last 5 years. 2., • Minimum 4 years of proven work experience as a Data Scientist, Machine Learning Engineer, Data Engineer, or Software Engineer, with a strong emphasis on distributed systems, cloud based architectures, developing operational AI/ML solutions, and designing API-based infrastructures, microservices architectures, and containerized applications (e.g., Docker, Kubernetes)., • Demonstrated experience working with GenAI, in particular LLMs, including preprocessing data, fine-tuning, and deployment in secure and scalable environments to include AI/ML frameworks such as TensorFlow, PyTorch, or scikit-learn., • Proven expertise in programming languages such as Python, Java, or Scala, with demonstrated experience in software engineering practices (e.g., version control, CI/CD pipelines, containerization)., • Experience building and optimizing data pipelines, ETL processes, and real-time streaming solutions using tools like Apache Airflow, Kafka, Spark, or equivalent., • Knowledge of applied AI principles, particularly in implementing AI systems for operational decision support and analyzing unstructured data (e.g., text, imagery)., • Ability to architect and maintain scalable data lakes, data warehouses, or distributed storage systems (e.g., Delta Lake, Snowflake, Hadoop, or NoSQL solutions)., • Demonstrated understanding of data security, privacy, and sovereignty issues, particularly in military or international environments, ensuring compliance with NATO operational and ethical standards., • Experience building visually impactful reports, dashboards, and analytics using tools such as Tableau, MS Power BI, or Kibana, supporting informed decision-making for high-level stakeholders., • Professional experience in NATO environments or familiarity with NATO processes, organizational culture, and decision-making structures., • Ability to translate operational problems into practical AI/ML solutions tailored for military and civilian teams., • Proven ability to collaborate effectively within multidisciplinary teams, including coordinating with data scientists, software engineers, and system architects on cross-functional projects., • Strong oral and written communication skills, with the ability to brief non-technical audiences and mentor staff in AI engineering, data science, and software development concepts. DEFTEC offers a comprehensive whole-life benefits package that includes medical, dental, vision, holiday, paid time off, 401K with a match, life insurance, short/long-term disability, and educational reimbursement. The DEFTEC team comprises professionals who make a difference daily in crucial national security missions. Our leadership knows that this happens by employing a diverse team that is well cared for. Our top priority is our employees, making DEFTEC an ideal workplace. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Please get in touch with if you require reasonable accommodations. DEFTEC is a Drug-Free Workplace where post-offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. AAP/EEO Statement DEFTEC Corp is an Equal Opportunity and Affirmative Action Employer and prohibits discrimination and harassment of any type based on actual or perceived race, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), gender, gender identity, and gender expression, religious creed, disability (mental and physical) including HIV and AIDS, medical condition (cancer and genetic characteristics ), genetic information, age, marital status, civil union status, sexual orientation, military and veteran status, denial of family and medical care leave, arrest record and/or any other characteristic(s) protected by federal, state or local law. This policy applies to all terms of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, training, compensation, benefits, employee activities, and general treatment during employment. Other Duties Please note that this job description is not designed to cover or contain a comprehensive listing of the activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice. Job Posted by ApplicantPro

Job Description Founded in 1995, ESN is a Small Disadvantaged Business (SDB), Service-Disabled Veteran-Owned Small Business (SDVOSB) and Veteran Owned Small Business (VOSB). ESN delivers trusted solutions that support our nation's defense. For more than two decades, we have been providing our military and government customers with mission-critical services including engineering and technical support, strategic and program management, testing and evaluation, operations support, and information technology. We are committed to proven, repeatable corporate quality management processes and are certified CMMI Maturity Level III - Development/Services & ISO 9001:2015. ESN is seeking a Computer System Analyst III (AWS). Position located on site in Chesapeake, VA. ESN is seeking a Computer System Analyst III (AWS) to support a contract with Naval Information Warfare Center (NIWC), Atlantic, in Norfolk, VA. The contract to support NIWC LANT consists of Independent Validation & Verification, Operations, Sustainment, and Installation support. The Maintenance Figure of Merit (MFOM) systems provide near real-time material-based readiness reporting to the Defense Readiness Reporting System-Navy (DRRS-N) and provides three additional primary capabilities to the Fleet including Ashore and Afloat systems. This support includes automated software testing, Scrum Master support, operating in the AWS Cloud, management of JIRA/Confluence, and project support. Position Description: · Design, Development, Test and Evaluate, Network Protocols, LAN administration, on UNIX and Windows based operating systems. · Design and maintain AWS database solutions. · Implement, troubleshoot, and maintain AWS Relational Database Service (RDS) solutions. Administer, test, and implement computer databases which may include coordinating computer database changes; implementing security measures to safeguard computer databases; and maintaining databases within an application area. · Schedule is Monday through Friday with some weekend support required. · Performs other duties and works schedules as assigned by management, which may include changes to duties, responsibilities, or work hours as required to meet contractual obligations, mission requirements, or the needs of the organization. Minimum Requirements: · Required Education: High School diploma/GED, related military experience, or trade/industrial school graduate. · Required certification - AWS Certified Cloud Practitioner. (Preferred certifications include AWS Certified Database specialty, related SQL certification, and Oracle Certified Professional) · Five (5) years of Computerized System experience, to include: Design, Development, Test and Evaluation, Network Protocols, LAN administration fundamentals, and UNIX and Windows based operating system. · Specific Experience- One (1) year experience designing and maintaining AWS database solutions. One (1) year experience implementing, troubleshooting, and maintaining AWS Relational Database Service (RDS) solutions. Active DoD Secret Clearance Required Job Posted by ApplicantPro

Job DescriptionDevSecOps Engineer – NATO Innovation Hub Location: Norfolk, Virginia Type: Full-Time, On-Site Role Overview NATO’s Innovation Hub (iHub) in Norfolk, Virginia, is seeking a skilled DevSecOps Engineer to support secure, reliable, and scalable digital development in defense contexts. This role focuses on integrating security into every stage of the software development lifecycle (SDLC) while enhancing the efficiency and reliability of NATO’s digital platforms. As a DevSecOps Engineer, you’ll implement and manage a security-first DevOps framework, supporting NATO’s mission by developing automated security solutions that align with NATO’s high-security standards. Key Responsibilities • End-to-End Security Integration: Implement security measures throughout the SDLC, including threat modeling, code reviews, and vulnerability assessments, while supporting automated testing and secure code deployment., • Automation & Infrastructure as Code (IaC): Develop and maintain automated CI/CD pipelines that incorporate security checks at every stage, ensuring rapid, secure, and compliant software deployment., • Monitoring & Response: Manage security monitoring tools, responding swiftly to incidents and adapting defenses based on real-time data. Develop incident response plans to address potential threats., • Collaboration with Cross-Functional Teams: Work closely with NATO’s developers, IT, and cybersecurity teams to integrate secure coding practices and support the continuous improvement of security protocols., • Documentation & Compliance: Maintain comprehensive documentation of security measures and configurations, ensuring compliance with NATO standards and enhancing system resilience.Qualifications, • Technical Skills: Proficiency in DevSecOps tools (e.g., Jenkins, Kubernetes, Docker), programming languages (Python, Bash), and security scanning tools (e.g., SonarQube, Fortify)., • Experience: 5+ years in DevSecOps or related roles within secure, multinational, or defense environments. Experience with IaC tools (e.g., Terraform) and security monitoring solutions is highly desirable., • Education: Bachelor’s degree in Computer Science, Cybersecurity, or a related field. Relevant certifications (e.g., AWS Certified DevOps Engineer, Certified Information Systems Security Professional - CISSP) are a plus. Powered by JazzHR W6Se1CvvmQ

Job DescriptionLocation: HQ SACT, Norfolk, VA Position Type: Full-time, Onsite Clearance Requirement: Active NATO or National SECRET (or higher) security clearanceRole OverviewIronclad Defense Works (IDW) is seeking an accomplished Senior AI Engineer & Software Developer to join NATO’s Allied Command Transformation (ACT) in supporting the Data Science & Artificial Intelligence (DSAI) Branch. This role combines responsibilities in data science, AI/ML engineering, and software development to enhance NATO’s digital transformation, data exploitation, and operational decision support initiatives. The successful candidate will lead the design, development, and deployment of secure, scalable, and innovative AI solutions—particularly in areas involving Large Language Models (LLMs), machine learning infrastructure, and data-driven applications that advance NATO’s mission.Key Responsibilities • Develop and operationalize AI/ML and LLM-based capabilities for NATO transformation and warfare development programs., • Design, build, and maintain data pipelines, APIs, and distributed systems to support secure and scalable AI solutions across the NATO Enterprise., • Architect and optimize software systems and AI-enabled platforms, ensuring interoperability, modularity, and NATO-compliant security., • Collaborate with data scientists, engineers, and subject-matter experts to build and deploy AI demonstrators, proofs of concept, and production-ready tools., • Implement machine learning frameworks (e.g., TensorFlow, PyTorch, scikit-learn) to support data modeling, inference, and generative AI applications., • Lead efforts to improve performance, data quality, and integration within cloud environments (e.g., Microsoft Azure, AWS)., • Develop, test, and maintain microservices, containerized AI applications, and software APIs using tools such as Docker and Kubernetes., • Provide technical training and mentorship to NATO staff on data engineering, AI, and digital literacy., • Support outreach and coordination with academic, industry, and defense innovation partners to promote AI adoption and collaboration., • Stay current on advancements in AI, ML, NLP, and LLM deployment to continuously modernize NATO’s digital capabilities.Required Qualifications, • Bachelor’s degree (or higher) in Computer Science, Software Engineering, Data Science, AI Engineering, or a related discipline. OR equivalent experience (minimum 6 years in software/AI development within the last 8 years)., • 4+ years of proven experience in data science, AI/ML engineering, or software development, including work on distributed systems, API-based infrastructures, and containerized applications., • Expertise in programming languages such as Python, Java, or C++, with proficiency in version control, CI/CD pipelines, and modern software practices., • Hands-on experience with AI/ML frameworks (e.g., TensorFlow, PyTorch, scikit-learn) and deployment of LLM solutions in secure environments., • Skilled in designing and managing data pipelines, ETL processes, and real-time data streaming using tools like Apache Airflow, Kafka, or Spark., • Demonstrated experience in cloud-based architectures (Azure or AWS) and data lake or warehouse technologies (Delta Lake, Snowflake, Hadoop)., • Understanding of NATO data security standards, data privacy, and ethical AI practices., • Excellent communication and documentation skills, with the ability to brief non-technical audiences and produce high-quality technical deliverables., • Eligible for and capable of obtaining/maintaining an active NATO or National SECRET clearance.Desired Skills, • Experience implementing Generative AI and LLM fine-tuning for operational or analytical use cases., • Knowledge of federated learning and secure data collaboration within multinational or classified environments., • Experience leading or contributing to AI outreach, hackathons, or academic/industry engagements., • Familiarity with Big Data ecosystems (Databricks, Spark) and DevSecOps best practices., • Ability to act as a “data storyteller,” transforming technical results into actionable insights for leadership., • Working knowledge of NATO processes, culture, and organizational structures., • Exposure to agile methodologies and project management tools (Jira, Trello, or Loop). Powered by JazzHR wquPf1qvJV

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview The responsibilities of our Platform team include building and maintaining all backend services, including, but not limited to, payments, analytics, subscriptions, new products, text to speech, and external APIs. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, is passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Design, develop, and maintain robust APIs including public TTS API, internal APIs like Payment, Subscription, Auth and Consumption Tracking, ensuring they meet business and scalability requirements, • Oversee the full backend API landscape, enhancing and optimizing for performance and maintainability, • Collaborate on B2B solutions, focusing on customization and integration needs for enterprise clients, • Proven experience in backend development: TS/Node (required), • Direct experience with GCP and knowledge of AWS, Azure, or other cloud providers, • Efficiency in ideation and implementation, prioritizing tasks based on urgency and impact, • Preferred: Experience with Docker and containerized deployments, • A dynamic environment where your contributions shape the company and its products, • A team that values innovation, intuition, and drive, • Autonomy, fostering focus and creativity, • The opportunity to have a significant impact in a revolutionary industry, • Competitive compensation, a welcoming atmosphere, and a commitment to an exceptional asynchronous work culture, • The privilege of working on a product that changes lives, particularly for those with learning differences like dyslexia, ADD, and more Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job Description The mission of Speechify is to make sure that reading is never a barrier to learning. Over 50 million people use Speechify's text-to-speech products to turn whatever they're reading – PDFs, books, Google Docs, news articles, websites – into audio, so they can read faster, read more, and remember more. Speechify's text-to-speech reading products include its iOS app, Android App, Mac App, Chrome Extension, and Web App. Google recently named Speechify the Chrome Extension of the Year and Apple named Speechify its 2025 Design Award winner for Inclusivity. Today, nearly 200 people around the globe work on Speechify in a 100% distributed setting – Speechify has no office. These include frontend and backend engineers, AI research scientists, and others from Amazon, Microsoft, and Google, leading PhD programs like Stanford, high growth startups like Stripe, Vercel, Bolt, and many founders of their own companies. Overview The responsibilities of our Platform team include building and maintaining all backend services, including, but not limited to, payments, analytics, subscriptions, new products, text to speech, and external APIs. This is a key role and ideal for someone who thinks strategically, enjoys fast-paced environments, is passionate about making product decisions, and has experience building great user experiences that delight users. We are a flat organization that allows anyone to become a leader by showing excellent technical skills and delivering results consistently and fast. Work ethic, solid communication skills, and obsession with winning are paramount. Our interview process involves several technical interviews and we aim to complete them within 1 week. What You'll Do • Design, develop, and maintain robust APIs including public TTS API, internal APIs like Payment, Subscription, Auth and Consumption Tracking, ensuring they meet business and scalability requirements, • Oversee the full backend API landscape, enhancing and optimizing for performance and maintainability, • Collaborate on B2B solutions, focusing on customization and integration needs for enterprise clients, • Proven experience in backend development: TS/Node (required), • Direct experience with GCP and knowledge of AWS, Azure, or other cloud providers, • Efficiency in ideation and implementation, prioritizing tasks based on urgency and impact, • Preferred: Experience with Docker and containerized deployments, • A dynamic environment where your contributions shape the company and its products, • A team that values innovation, intuition, and drive, • Autonomy, fostering focus and creativity, • The opportunity to have a significant impact in a revolutionary industry, • Competitive compensation, a welcoming atmosphere, and a commitment to an exceptional asynchronous work culture, • The privilege of working on a product that changes lives, particularly for those with learning differences like dyslexia, ADD, and more Think you're a good fit for this job? Tell us more about yourself and why you're interested in the role when you apply. And don't forget to include links to your portfolio and LinkedIn. Not looking but know someone who would make a great fit? Refer them! Speechify is committed to a diverse and inclusive workplace. Speechify does not discriminate on the basis of race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or other legally protected status.

Job DescriptionFull Stack Developer - NATO Innovation Hub Location: Norfolk, Virginia Type: Full-Time, On-Site Role Overview Ironclad Defense Works in Norfolk, Virginia, seeks an experienced Full Stack Developer to support mission-critical systems and enhance digital capabilities in defense operations. This role involves developing, deploying, and maintaining NATO’s web-based applications, ensuring system integrity, and enhancing cybersecurity measures. You’ll work closely with NATO teams, contributing to projects focused on interoperability, data management, and operational readiness. Key Responsibilities • Development & Maintenance: Lead the development of both front-end and back-end features, ensuring a seamless user experience across NATO’s digital platforms., • Collaboration: Engage in cross-functional collaborations with NATO teams and other stakeholders to support system integration, data sharing, and digital transformation initiatives., • Security Compliance: Implement and monitor cybersecurity protocols to meet NATO’s high-security standards, contributing to secure data storage, access control, and compliance., • Troubleshooting & Optimization: Quickly identify and resolve issues in application performance, ensuring all NATO systems meet mission requirements., • Documentation: Maintain detailed technical documentation and coding standards for continuity and compliance with NATO’s operational frameworks.Essential Qualifications, • Technical Skills: Expertise in languages such as JavaScript, Python, and C#, with strong experience in frameworks like React and Node.js. Proficiency in databases (SQL, NoSQL) and familiarity with cloud environments (AWS, Azure) is a plus., • Experience: 5+ years in full-stack development, ideally within a defense or multinational context. Previous experience working with secure and scalable applications is highly desirable., • Security Clearance: active Secret clearance. Powered by JazzHR o8DVENyo9X

Job DescriptionSalary: Who we are: Altagrove delivers smart and innovative technology solutions that create competitive advantages for our customers and their missions. Our focus areas include Space, Connectivity, Cyber, Cloud, Analytics, and Research & Development. As we continue to grow, Altagrove is actively recruiting for a Sr. Network Engineer to join our energetic and entrepreneurial team that is executing on a variety of projects that are technology oriented. A successful candidate will bring a core area of expertise and a passion for learning and implementing new ideas in a start-up environment. Follow us at - What you will do: • The candidate shall provide a qualified workforce to function as the lead Wireless Network Engineer who can support defense related data instrumentation and data driven analysis capability., • Lead the installation, configuration, and optimization of shipboard Wi-Fi systems to ensure reliable and high-performance connectivity throughout the vessel., • Troubleshoot and resolve Wi-Fi connectivity issues, performing regular maintenance and updates to ensure optimal performance., • Support the design, configure, and maintain Aruba wireless and wired network solutions., • Maintains computer networks including mainframes, VPNs, routers and other physical hardware., • Installs and configures network equipment., • Creates firewalls and updates virus protection software and data security systems to keep data and communications protected., • Monitors computer systems to improve network performance for all systems., • Perform site surveys for the installation of IP hardware at customer facilities to identify interface requirements, power budgets, rack space requirements, distribution of hardware, and cable patching (serial and Ethernet)., • Manage the integration of shipboard networks, including the planning, installation, and configuration of network hardware and software., • Troubleshoots, resolves, and communicates networking issues to other employees and management., • Implements disaster recovery procedures., • Maintains current knowledge and understanding of security and networking best practices of industry and DoD to offer the best solutions and protection of systems., • Designs and implements new network solutions and/or improving the efficiency of current networks., • Installs, configures and maintains network equipment including routers, proxy servers, switches, WAN accelerators, DNS and DHCP., • Creates and maintains professional documentation of network configurations, topologies and equipment utilizing the Microsoft Office Suite to include Visio., • Provide network design, configuration, and implementation support for corporate and government networks., • Provide network design, configuration, and implementation support for Data center routing and switching environment., • Provide customer support and guidance through operational support as well as value added recommendations in industry best practice and network efficiency., • Provide technical support to internal and external customers including problem troubleshooting and resolution of network events and outages., • Generate engineering standards and perform acceptance testing for new equipment and solutions., • Develop and maintain engineering tasks, engineering goals and objectives., • Develop and maintain internal processes and provide skills training to other staff on an as-required basis, through knowledge sharing and mentoring., • Lead projects with the ability to function in a highly dynamic environment. What you will bring: * Highly proficient knowledge of Cisco Routers and Switches. * Design, configure, and troubleshoot BGP and OSPF routing protocols. * Knowledge and experience with MPLS/VPNs in a service provider environment. * Preferred experience with Aruba network solutions (including switches, wireless access points, and management platforms like Aruba Central or AirWave). * Experience with LAN infrastructure VLANs, Trunking, HSRP, etc. * Experience Installing/Troubleshooting WAN circuits. * Experience designing and configuring QoS CBWFQ, LLQ, and Classification Methods. * Expert knowledge and understanding of TCP/IP network technologies; DNS, DHCP, TFTP, NAT, and SSL. * Experience configuring and troubleshooting Cisco IPsec (AES 256), Firewall (Cisco Firepower, Fortinet, Checkpoint or Palo Alto networks), IPS, route-maps, and ACLs. * Experience configuring wireless technologies (802.11a/b/g/n/ac) using Cisco/Aruba controllers and APs. * Experience working with Network Management Systems (e.g. SolarWinds, Splunk, ServiceNow, etc.). * Experience working in AWS or Azure Cloud. * Knowledge of SDN, SD-WAN technologies (e.g. Cisco ACI, EVPNs, etc.) * Must be proficient with both layer 2 and layer 3 networking concepts, protocols, and technologies and have intimate working knowledge with routing and switching configurations on Cisco IOS equipment. * Must be familiar with network security concepts and best practices to include firewall administration through McAfee Sidewinder and Cisco ASA and/or Juniper products and services. * Highly prefer having working knowledge of DoD network policies and regulations in relation to network design and configuration; must have a firm understanding of network design concepts and articulation of those concepts through documentation such as engineering proposals and diagrams. * Must have in-depth understanding and practical knowledge of networking systems such as LAN, firewalls, routers and printers. * Must have comprehensive understanding of network services and networks such as TCP/IP, OSPF and EIGRP. * Must have the ability to analyze and evaluate networks, identify issues and provide solutions to ensure networks are operating efficiently. * Must have the ability to design, implement and troubleshoot Wi-Fi and security infrastructure. * Must maintain a Secret security clearance with Top Secret eligibility. * CCNA with a CCNP desired. * 5+ years of network administration/engineering experience within the DoD desired. * Experience supporting and working with cross-functional teams in a dynamic environment desired. * Willing to go the extra mile on behalf of our customers, partners, and their missions. * Self-motivated with the ability to work independently and in a highly dynamic team environment as a team lead and a valued member. * Possess a high degree of attention to detail. * US Citizenship required.

🏥 About Life Protect 24/7 Life Protect 24/7 is one of North America’s fastest-growing medical alert and personal safety companies, dedicated to protecting the lives of seniors and vulnerable individuals. With a team of over 500 professionals and a strong presence in both the medical alert and insurance industries. We utilize modern web technologies to keep our company on the cutting edge of these industries and we’re looking for a smart, hands-on developer to help us continue to grow. 💻 What You’ll Do As a Software Developer at Life Protect 24/7, you’ll join a small, fast-moving, and collaborative development team where your work will be seen, used, and appreciated. From our cloud-based call center systems to internal productivity tools and custom-built kiosk/touchpoint apps, your code will power the heartbeat of the business. You’ll be responsible for: • Designing, building, and maintaining cloud-first web applications on Google Cloud Platform (GCP), • Enhancing and expanding our internal RESTful APIs and integrating with third-party APIs, • Automating deployment and version control for 500+ on-prem and remote devices, • Helping us modernize our CI/CD workflows using tools like Docker, and GitLab, • Documenting systems, processes, and deployment pipelines to help scale the team 🧠 What We’re Looking For Required Skills: • 3+ years of experience with PHP (OOP and frameworks), • 2+ years with JavaScript, • 1+ years of experience deploying applications on cloud platforms (GCP, AWS, Azure), • Strong Git/GitLab experience for version control, • Experience working in high-load, high-scale environments, • Strong communication skills and a proactive, self-directed mindset, • Experience with Docker in development or production Bonus Points For: • Frontend experience with React or other modern JS frameworks, • Comfortable in Linux environments, • Understanding of PCI/DSS compliance, • A good design eye and user-centric thinking, • A love of learning and staying up to date on tech trends 🎯 Why Join Us? • Direct Impact: Your code won’t disappear into a black hole. You’ll see the results of your work across real systems, real users, and real customers., • Tight-Knit Team: We run lean and smart. Your ideas will shape product direction, architecture, and user experience. On-Site Perks: • Fully stocked kitchen (snacks, premium coffee, etc), • On-site company bistro, • Walking trails and outlet shopping next door 💰 Compensation & Benefits • Competitive salary, • 401(k) with company match, • Medical, Dental, Vision, Life, and AD&D insurance, • HSA and FSA options, • Paid Time Off

Summary: \n Use manual, semi-automatic, flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Perform (with training) Mechanized welding, cutting, and gouging processes as required by the work activity. \n Duties and Responsibilities: \n\n • Operate safety equipment and use safe work habits\n, • Weld components in 2G, 3G, 4G and 6G positions in at least 6 processes. Interpret a NAVSEA approved WPS (weld procedure specification)\n, • Use fillet weld gauges, V-WAC gauge, bridge cam gauge for first in line quality checks as welds are completed, according to the correct NAVSEA fabrication document\n, • Set up or program power supplies with the ability to identify correct support gear needed for any weld process necessary to complete work activity\n, • Proficient in oxy/fuel cutting, plasma cutting and CAC-A (carbon arc air) cutting, gouging, and scarfing of welds and beveling plates\n, • Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding\n, • Detect and troubleshoot faulty operation of equipment and/or defective materials and fix as required then notify management if replacement equipment is needed\n, • Operate manual or semi-automatic welding equipment to join weldments, using processes such as GTAW, GMAW, FCAW, GMAW-P, GMAW-S, SMAW, SAW, Mechanized processes, and ability to set up stud welding gun consistently using any combination of at least 6 processes\n, • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material\n, • Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with NAVSEA specifications\n, • Recognize, set up, and operate hand and power tools common to the welding trade, such as angle grinders, die grinders and needle scalers\n, • Lay out, position, align, and secure parts and assemblies, using straightedges, combination squares, calipers, and rulers\n, • Knowledge, ability, and proficiency in Fitting\n, • Ability to work consistently with employees and assign daily assignments and coordinate directly with a general foreman or production manager to maintain delivery of scheduled project milestones\n, • Expertly follows WPS to ensure proper mil-cert filler wire and base metals are used in accordance with the work activity to ensure NAVSEA specifications are properly met\n, • Ensure that level one material control requirements are followed in accordance with the applicable QSPM documents\n, • Perform all duties on an expert and professional level while being able to mentor 2nd and 3rd class welders to minimize rework and maintain on-time and first-time quality\n, • Perform work outside of trade when required\n, • Work Experience: Minimum 5+ years related welding experience, or accredited Apprenticeship Program graduate or Journeyman Certificate accepted in lieu of work experience\n, • Ability to weld PQR plates to qualify the company for new processes\n, • Ability to be certified to the company's Level 2 VT NDT procedures\n, • Candidate must have prior experience and qualification in accordance with applicable NAVSEA documents\n, • Knowledge of a wide range of welding principles, processes, and techniques requiring correct weld joint identification in accordance with MIL-22D or AWS D1.1, and the ability to identify and correct weld defects prior to an NDT inspector showing up on site providing acceptable and constant first-time quality\n, • Ability to interpret weld symbols and identify necessary weld sizes and joint configuration\n, • Ability to maintain dimensions and tolerances to specifications\n, • Ability to weld dissimilar metals\n, • Ability to weld parts and structures that vary in size, shape, and thickness\n, • Must be able to obtain and maintain access to assigned military/government installations as required for work activity\n, • Preferred Qualifications: weld certifications in multiple processes as required per division needs\n, • 25' Tape\n, • 3 lb. hammer\n, • Burning goggles\n, • Striker\n, • Full Face Welding Shield\n, • Welding Gloves\n, • Slag Hammer\n, • Bottle Wrench\n, • 12" Crescent Wrench\n, • Wire Cutters\n, • Pliers\n, • Utility Knife\n, • Electrode holder (stinger)\n

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Electrical Installations, Electrical Systems, Motor Repair Certifications: Certified Welder (CWP) | American Welding Society (AWS) - American Welding Society (AWS) Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Marine Electrician (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Marine Electrician (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOD type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of Defense Personnel Security Clearance (PCL) at the confidential level or higher. Marine Electricians Non-Nuclear Electrical Work (TSD EW): Install, modify, repair, troubleshoot and test various electrical and electronics systems, circuits, controls, instruments and equipment. Also includes installation of wire ways and cabling. Marine Electricians Generator/Motor Repair, Electrical (TSD E4): Shop work such as disassembly, inspection, test, cleaning, varnishing, baking, and reassembly, and shipboard investigate/repair generators, motors, and transformers electrical component. Marine Electricians Topside Electrical Work (TSD TZ): Remove, Disassemble, inspect, repair, adjust, test, and install external electrical systems cabling in tanks, voids, and sails. Includes installation of hull fittings, penetrators, and tank level indicators. Marine Electrician Tasks TSD EW (Non-nuclear Electrical Work): Remove, modify, and install electrical equipment Remove, install, groom, and band wireways and cabling Pack and unpack equipment and bulkhead penetrations Repair electrical equipment and cabling Utilize electrical checks to test and troubleshoot electrical systems Disconnect, groom, and reconnect wiring TSD E4 (Generator/Motor Repair, Electrical): Disassemble and replace motor and generator components Troubleshoot, modify and adjust motors and generators Balance motor and generator components Insulate using mechanical and dip methods Stone and bevel commutator and slip rings Assemble motor and generator components TSD TZ (Topside Electrical Work): Remove, modify, and install electrical equipment Disconnect, remove, install, groom, band, and reconnect wireways and cabling Utilize electrical checks to test electrical systems Remove, install, and test hull fittings, penetrations, and tank level indicators Marine Electrician Skill Requirements TSD EW (Non-nuclear Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD EW. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD E4 (Generator/Motor Repair, Electrical): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD E4. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD TZ (Topside Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD TZ. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Scaffolding Safety, Ship Maintenance, Ship Repair Certifications: Certified Welder (CWP) | American Welding Society (AWS) - American Welding Society (AWS) Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Welder (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Welder (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Welder Tasks \n • Perform structural welding of deck structures, support braces, foundations, or hangers using one of a number of processes such as shielded metal arc welding (SMAW) or gas tungsten arc welding (GTAW) onboard submarines, in buildings and in the field.\n, • Prepare finished welds by hand grinding or burring to meet visual acceptance standards.\n, • Set up and operate stud welding equipment as needed onboard submarines, in buildings and in the field.\n, • Install hot work protection and/or build weld containments for fire prevention.\n, • Perform firewatch duties during welding operations.\n\n Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Welder Skill Requirements At least 2 years of experience welding in a heavy industrial work environment such as ship building, power plant construction, commercial building construction or bridge construction. Qualified per Technical Publication S9074-AQ-GIB-010/248 with the following essential elements: Welder Qualification record verifying tests performed in three positions. Alternatively, the welder tests may be performed in the 6G position (from TP-248) provided the test is performed using a singular weld process. No dual process qualifications will be accepted. The welder qualification test record shall include at least the following information: Welder Identification (Full Name at a minimum) Date of test Qualification Test thickness - test assembly thickness .375" or higher Qualification test process (SMAW, GTAW, or GMAW as applicable) Qualification test position (2G, 3G, 4G, or 6G) Qualification test base material type Qualification test filler material type and size Qualification test results Certifying signature (fabricator, test administrator or quality assurance officer attesting to test conditions and results) The welder qualification test shall be performed as follows: \n • The qualification testing shall have been performed with an approved Butt weld joint design from MIL-STD 22\n, • The filler material to be used during testing shall be MIL-9018-M, 10018M, 10718M, 11018M, 12018M or 14018M for the SMAW process\n\n The filler material to be used during testing shall be MIL-100S-1, 100S-2, 120S-1, or 140S-2 for the GTAW or GMAW process. The Qualification Test shall be evaluated IAW with the requirements contained in S9074-A-GIB018/248 (performed IAW T9074-AS-GIB-010/271, (TP 271) evaluated to class 1 requirements of MIL-STD 2035). Qualification tests shall be evaluated visually and by Radiography, ultrasonically, or by bend testing. The qualification shall have been maintained by actual use of the welding process quarterly (evidence of maintenance for process use shall be maintained for the current and preceding quarter) Jaeger J-1 or equivalent Annual Vision certification (glasses or no glasses) Undergo training to self-identify and correct poor workmanship. This training is a 40-hour course that includes a written and practical examination. A grade of 80% or better is required on each to be considered passing. Trained, qualified fit to wear respiratory protection devices IAW 29 CFR 1910.134 (Subpart I). Welder Technical Standards National Fire Protection Association (NFPA) Standard 51B, 2014 Edition - Standard for Fire Prevention during Welding, Cutting and Other Hot Work. ANSI/ASC Z49.1-2005 - Safety in Welding, Cutting, and Allied Processes NAVSEA S9086-CH-STM-010, Chapter 074 - Welding and Allied Processes Compressed Gas Association (CGA) SB-11 - Use of Rubber Welding Hose NAVSEA Tech Pub S9074-AQ-GIB-010/248 NAVSEA Tech Pub S9074• AR-GIB-010/278 NAVSEA Tech Pub T9074-AD-GIB-010/1688 29 CFR 1910.134 Respiratory Protection 9.3.9.4 Required Trade Skill Training Blueprint Reading Electrical Safety for Non-electrical workers Layout Procedures Set-up & Use of Hot Work Containments Stud-shooting techniques Selecting and Wearing Respirators GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Scaffolding Safety, Ship Maintenance, Ship Repair Certifications: Certified Welder (CWP) | American Welding Society (AWS) - American Welding Society (AWS) Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Welder (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Welder (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Welder Tasks \n • Perform structural welding of deck structures, support braces, foundations, or hangers using one of a number of processes such as shielded metal arc welding (SMAW) or gas tungsten arc welding (GTAW) onboard submarines, in buildings and in the field.\n, • Prepare finished welds by hand grinding or burring to meet visual acceptance standards.\n, • Set up and operate stud welding equipment as needed onboard submarines, in buildings and in the field.\n, • Install hot work protection and/or build weld containments for fire prevention.\n, • Perform firewatch duties during welding operations.\n\n Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Welder Skill Requirements At least 2 years of experience welding in a heavy industrial work environment such as ship building, power plant construction, commercial building construction or bridge construction. Qualified per Technical Publication S9074-AQ-GIB-010/248 with the following essential elements: Welder Qualification record verifying tests performed in three positions. Alternatively, the welder tests may be performed in the 6G position (from TP-248) provided the test is performed using a singular weld process. No dual process qualifications will be accepted. The welder qualification test record shall include at least the following information: Welder Identification (Full Name at a minimum) Date of test Qualification Test thickness - test assembly thickness .375" or higher Qualification test process (SMAW, GTAW, or GMAW as applicable) Qualification test position (2G, 3G, 4G, or 6G) Qualification test base material type Qualification test filler material type and size Qualification test results Certifying signature (fabricator, test administrator or quality assurance officer attesting to test conditions and results) The welder qualification test shall be performed as follows: \n • The qualification testing shall have been performed with an approved Butt weld joint design from MIL-STD 22\n, • The filler material to be used during testing shall be MIL-9018-M, 10018M, 10718M, 11018M, 12018M or 14018M for the SMAW process\n\n The filler material to be used during testing shall be MIL-100S-1, 100S-2, 120S-1, or 140S-2 for the GTAW or GMAW process. The Qualification Test shall be evaluated IAW with the requirements contained in S9074-A-GIB018/248 (performed IAW T9074-AS-GIB-010/271, (TP 271) evaluated to class 1 requirements of MIL-STD 2035). Qualification tests shall be evaluated visually and by Radiography, ultrasonically, or by bend testing. The qualification shall have been maintained by actual use of the welding process quarterly (evidence of maintenance for process use shall be maintained for the current and preceding quarter) Jaeger J-1 or equivalent Annual Vision certification (glasses or no glasses) Undergo training to self-identify and correct poor workmanship. This training is a 40-hour course that includes a written and practical examination. A grade of 80% or better is required on each to be considered passing. Trained, qualified fit to wear respiratory protection devices IAW 29 CFR 1910.134 (Subpart I). Welder Technical Standards National Fire Protection Association (NFPA) Standard 51B, 2014 Edition - Standard for Fire Prevention during Welding, Cutting and Other Hot Work. ANSI/ASC Z49.1-2005 - Safety in Welding, Cutting, and Allied Processes NAVSEA S9086-CH-STM-010, Chapter 074 - Welding and Allied Processes Compressed Gas Association (CGA) SB-11 - Use of Rubber Welding Hose NAVSEA Tech Pub S9074-AQ-GIB-010/248 NAVSEA Tech Pub S9074• AR-GIB-010/278 NAVSEA Tech Pub T9074-AD-GIB-010/1688 29 CFR 1910.134 Respiratory Protection 9.3.9.4 Required Trade Skill Training Blueprint Reading Electrical Safety for Non-electrical workers Layout Procedures Set-up & Use of Hot Work Containments Stud-shooting techniques Selecting and Wearing Respirators GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of 1-2 years of applicable welding experience\n, • ASNT NDT Level I Certification, or relevant experience.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder II for our Norfolk, VA office beginning on or around June 2nd . The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Duties & responsibilities include, but are not limited to the following: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments.\n, • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.\n, • Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspects completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Leads technical project teams, schedules, reports and briefs customers and senior management.\n, • Performs duties outside of specialty in order to complete installation or work assignment.\n, • Experience in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch.\n, • Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions.\n\n Experience and Skills \n • Must possess a high school, trade or vocational school degree\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred\n, • Must have or have the ability to obtain a SECRET clearance\n, • Must have the ability to obtain base access and security credentials\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces\n, • Travel may be required within and outside of the continental United States\n, • Due to export control regulations, this role is open to U.S. citizens of the US \n, • Demonstrated reliability and punctuality; must be able to consistently report to work on time\n, • Possess basic and some advanced specialized welder's tools\n\n Job Benefits Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to See all of our latest opportunities at or follow us on our LinkedIn page at Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran". "This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans."

1st Class Pipe Welder - Weld America Purpose: Weld America, a division of Colonna's Shipyard, is seeking 1st Class Pipe Welders to support operations on local (Norfolk, VA) and non-local projects. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must be able to successfully demonstrate TIG CuNi (copper nickel) pipe welding., • Must have experience working in physically demanding environments., • Must have at least 3 years of experience using SMAW (Shielded Metal Arc Welding) or Gas Tungsten Arc (GTAW) welding., • Must be able to work weekends and overtime, as needed., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Summary: \n Use manual, semi-automatic, flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Perform (with training) Mechanized welding, cutting, and gouging processes as required by the work activity. \n Duties and Responsibilities: \n\n • Operate safety equipment and use safe work habits\n, • Weld components in 2G, 3G, 4G and 6G positions in at least 6 processes. Interpret a NAVSEA approved WPS (weld procedure specification)\n, • Use fillet weld gauges, V-WAC gauge, bridge cam gauge for first in line quality checks as welds are completed, according to the correct NAVSEA fabrication document\n, • Set up or program power supplies with the ability to identify correct support gear needed for any weld process necessary to complete work activity\n, • Proficient in oxy/fuel cutting, plasma cutting and CAC-A (carbon arc air) cutting, gouging, and scarfing of welds and beveling plates\n, • Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding\n, • Detect and troubleshoot faulty operation of equipment and/or defective materials and fix as required then notify management if replacement equipment is needed\n, • Operate manual or semi-automatic welding equipment to join weldments, using processes such as GTAW, GMAW, FCAW, GMAW-P, GMAW-S, SMAW, SAW, Mechanized processes, and ability to set up stud welding gun consistently using any combination of at least 6 processes\n, • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material\n, • Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with NAVSEA specifications\n, • Recognize, set up, and operate hand and power tools common to the welding trade, such as angle grinders, die grinders and needle scalers\n, • Lay out, position, align, and secure parts and assemblies, using straightedges, combination squares, calipers, and rulers\n, • Knowledge, ability, and proficiency in Fitting\n, • Ability to work consistently with employees and assign daily assignments and coordinate directly with a general foreman or production manager to maintain delivery of scheduled project milestones\n, • Expertly follows WPS to ensure proper mil-cert filler wire and base metals are used in accordance with the work activity to ensure NAVSEA specifications are properly met\n, • Ensure that level one material control requirements are followed in accordance with the applicable QSPM documents\n, • Perform all duties on an expert and professional level while being able to mentor 2nd and 3rd class welders to minimize rework and maintain on-time and first-time quality\n, • Perform work outside of trade when required\n, • Work Experience: Minimum 5+ years related welding experience, or accredited Apprenticeship Program graduate or Journeyman Certificate accepted in lieu of work experience\n, • Ability to weld PQR plates to qualify the company for new processes\n, • Ability to be certified to the company's Level 2 VT NDT procedures\n, • Candidate must have prior experience and qualification in accordance with applicable NAVSEA documents\n, • Knowledge of a wide range of welding principles, processes, and techniques requiring correct weld joint identification in accordance with MIL-22D or AWS D1.1, and the ability to identify and correct weld defects prior to an NDT inspector showing up on site providing acceptable and constant first-time quality\n, • Ability to interpret weld symbols and identify necessary weld sizes and joint configuration\n, • Ability to maintain dimensions and tolerances to specifications\n, • Ability to weld dissimilar metals\n, • Ability to weld parts and structures that vary in size, shape, and thickness\n, • Must be able to obtain and maintain access to assigned military/government installations as required for work activity\n, • Preferred Qualifications: weld certifications in multiple processes as required per division needs\n, • 25' Tape\n, • 3 lb. hammer\n, • Burning goggles\n, • Striker\n, • Full Face Welding Shield\n, • Welding Gloves\n, • Slag Hammer\n, • Bottle Wrench\n, • 12" Crescent Wrench\n, • Wire Cutters\n, • Pliers\n, • Utility Knife\n, • Electrode holder (stinger)\n

Summary: Use manual, semi-automatic, flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Perform (with training) Mechanized welding, cutting, and gouging processes as required by the work activity. Duties and Responsibilities: • Operate safety equipment and use safe work habits, • Weld components in 2G, 3G, 4G and 6G positions in at least 6 processes. Interpret a NAVSEA approved WPS (weld procedure specification), • Use fillet weld gauges, V-WAC gauge, bridge cam gauge for first in line quality checks as welds are completed, according to the correct NAVSEA fabrication document, • Set up or program power supplies with the ability to identify correct support gear needed for any weld process necessary to complete work activity, • Proficient in oxy/fuel cutting, plasma cutting and CAC-A (carbon arc air) cutting, gouging, and scarfing of welds and beveling plates, • Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding, • Detect and troubleshoot faulty operation of equipment and/or defective materials and fix as required then notify management if replacement equipment is needed, • Operate manual or semi-automatic welding equipment to join weldments, using processes such as GTAW, GMAW, FCAW, GMAW-P, GMAW-S, SMAW, SAW, Mechanized processes, and ability to set up stud welding gun consistently using any combination of at least 6 processes, • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material, • Examine work pieces for defects, and measure work pieces with straightedges or templates to ensure conformance with NAVSEA specifications, • Recognize, set up, and operate hand and power tools common to the welding trade, such as angle grinders, die grinders and needle scalers, • Lay out, position, align, and secure parts and assemblies, using straightedges, combination squares, calipers, and rulers, • Knowledge, ability, and proficiency in Fitting, • Ability to work consistently with employees and assign daily assignments and coordinate directly with a general foreman or production manager to maintain delivery of scheduled project milestones, • Expertly follows WPS to ensure proper mil-cert filler wire and base metals are used in accordance with the work activity to ensure NAVSEA specifications are properly met, • Ensure that level one material control requirements are followed in accordance with the applicable QSPM documents, • Perform all duties on an expert and professional level while being able to mentor 2 nd and 3 rd class welders to minimize rework and maintain on-time and first-time quality, • Perform work outside of trade when required, • Work Experience: Minimum 5+ years related welding experience, or accredited Apprenticeship Program graduate or Journeyman Certificate accepted in lieu of work experience, • Ability to weld PQR plates to qualify the company for new processes, • Ability to be certified to the company's Level 2 VT NDT procedures, • Candidate must have prior experience and qualification in accordance with applicable NAVSEA documents, • Knowledge of a wide range of welding principles, processes, and techniques requiring correct weld joint identification in accordance with MIL-22D or AWS D1.1, and the ability to identify and correct weld defects prior to an NDT inspector showing up on site providing acceptable and constant first-time quality, • Ability to interpret weld symbols and identify necessary weld sizes and joint configuration, • Ability to maintain dimensions and tolerances to specifications, • Ability to weld dissimilar metals, • Ability to weld parts and structures that vary in size, shape, and thickness, • Must be able to obtain and maintain access to assigned military/government installations as required for work activity, • Preferred Qualifications: weld certifications in multiple processes as required per division needs, • 25' Tape, • 3 lb. hammer, • Burning goggles, • Striker, • Full Face Welding Shield, • Welding Gloves, • Slag Hammer, • Bottle Wrench, • 12" Crescent Wrench, • Wire Cutters, • Pliers, • Utility Knife, • Electrode holder (stinger) TO APPLY FOR THIS POSITION, GO HERE:

Epsilon Systems is seeking a full time Weld Program Manager/NDT Level III Examiner in Portsmouth, VA. Summary: Prepares Welding, Brazing and NDT procedures for NAVSEA, AWS, ASME and ABS programs. Administers the Welder, Brazer and NDT training and qualification program. Subject Matter Expert (SME) in Welding, Brazing and Non-Destructive Testing associated with service craft, boat, ship, and submarine repair and modernization. Duties and Responsibilities: \n • Reports to QA Director for all assignments and supervision\n, • Administers/oversees the Welder, Brazer and NDT training, qualification and maintenance program\n, • Responsible for management of the Welding/Brazing/NDT Programs through subordinate supervisors/managers.\n, • Oversees and approves quality standards for structural and pipe material and equipment receiving, in-process and final inspection in accordance with company and contractual requirements.\n, • Inspects and monitors work performed on government and commercial work items, specializing in weld and coatings inspections.\n, • Reviews work packages prior to start-work for completeness, accuracy and compliance with technical specifications and customer requirements for welding, brazing and NDT.\n, • Performs in-process work surveillances and conducts final work-package review after work-completion for welding, brazing and NDT.\n, • Performs internal audits to monitor compliance with company procedures and performs external audits to evaluate supplier suitability for use.\n, • Reviews status of in-process rejections and recommends appropriate corrective action.\n, • Acts as a primary liaison with customers, vendors and various company departments for Welding/Brazing/NDT Program support.\n, • Advises management of test trends, returns, vendor performance and audit results and corrective action needed.\n, • Responsible for the training, motivation and discipline of assigned employees (when required).\n\n\n, • Writes and administers qualification exams for Welders, Brazers and NDT Programs.\n, • Develops quality and Workmanship standards for Welders, Brazers and NDT personnel.\n, • Monitors compliance with company Quality Management System, Workmanship standards and Customer requirements.\n, • Develops quality control and inspection procedures for inclusion in production Work-Packages and QA Work Books.\n, • Defines test standards and specifies test equipment and procedures.\n, • Reviews Technical Specifications and contract requirements to advise Bid Team of Welding, Brazing and NDT requirements to help evaluate company capabilities and support the Bid review\n, • Reviews Technical Specifications and contract requirements during Work Package and QA Work Book development to provide guidance for Welding, Brazing and NDT technical requirements, PCP development and qualification needs.\n, • Reviews Test and Inspection Plans (TIP) for structural/piping test and inspection requirements prior to release to production\n, • Reviews completed weld, brazing and NDT objective quality evidence (OQE) for accuracy and completeness prior to certification\n, • Provides Production technical guidance during accomplishment of projects.\n, • Conducts Quality Assurance inspections, Audit and Surveillances for the Welding/Brazing and NDT Programs.\n, • Works with customer QA representatives to coordinate inspection and acceptance activities.\n, • Reviews QA control requirements with customer representative to assure compliance with requirements.\n\n, • Weld/Structural Engineer Degree or equivalent (preferred)\n, • High school diploma or GED.\n, • 10 years of Management of Weld, Brazing and NDT Programs.\n, • 5 years waterfront Weld/Braze/NDT Program Management for NAVSEA contracts.\n, • 5 years waterfront Weld/Braze/NDT Program Management for Commercial contracts.\n, • NDT Level III Examiner Certification for VT, PT, MT and UT processes\n, • Frequent standing, sitting, walking, handling, feeling with hands, reaching with arms.\n, • Prolonged sitting and use of computer, (typing, keyboarding)\n, • Regular communication (hearing/speaking).\n, • Occasional stooping, kneeling, and crouching.\n, • Occasional lifting up to 20+ pounds.\n, • See details at close range (within a few feet of the observer).\n

Requisition Number: 25254 Required Travel: 0 - 10% Employment Type: Full Time/Salaried/Exempt Anticipated Salary Range: $54,127.00 - $65,020.80 Security Clearance: Ability to Obtain Level of Experience: Entry Level This opportunity resides with Global Security (GS). Mission Technologies' Global Security (GS) group comprises live, virtual, constructive (LVC) solutions; fleet sustainment; nuclear and environmental; and Australia business. As a trusted partner to our military customers, HII designs, develops and operates the largest LVC enterprise that prepares warfighters for cross-domain battle. With advanced technologies to enable mission readiness, HII understands that preparation requires full coordination-not readiness in piece-parts. For more than 40 years, the U.S. Navy has entrusted HII to maintain and modernize the vast majority of its fleet. With a holistic approach to life-cycle maritime defense systems-from small watercraft to submarines, surface combatants and aircraft carriers-HII ensures a high state of readiness. HII supports the Department of Energy's national security mission through the management and operation of its sites, as well as the safe cleanup of legacy waste across the country. HII meets clients' toughest nuclear and environmental challenges. Meet HII's Mission Technologies Division Our team of more than 7,000 professionals worldwide delivers all-domain expertise and advanced technologies in service of mission partners across the globe. Mission Technologies is leading the next evolution of national defense - the data evolution - by accelerating a breadth of national security solutions for government and commercial customers. Our capabilities range from C5ISR, AI and Big Data, cyber operations and synthetic training environments to fleet sustainment, environmental remediation and the largest family of unmanned underwater vehicles in every class. Find the role that's right for you. Apply today. We look forward to meeting you. To learn more about Mission Technologies, click here for a short video: Job Description HII Mission Technolgoies is seeking an Electrical/Cabling Engineer to support our customer in Chesapeake, VA. The Electrical/Cabling Engineer will report to the Senior Design Engineer/Integrator and will primarily be responsible for providing cabling support and preparing Cable Impact Statement and Cable Run Sheets to ensure that equipment is properly cabled for effective communication with other equipment and systems on board Naval ships. This position is contingent upon contract award. Essential Job Responsibilities • Understand combat system (e.g. Aegis) specifications and the General Specification for Overhaul (GSO)., • Determine the correct cable type required to support equipment being installed based on Aegis specifications and the GSO., • Identify the proper connectors and back shells for electrical/cabling., • Identify how cables shall be pinned internally., • Provide the Cable Impact Statement and Cable Run Sheets to support delivery of the TDP., • Prepare and maintain ECNs to drawings in support of AWS deliverable cable sets., • Provide all required information to the Senior Design Engineer/Integrator to develop the Cable Block Diagram in the TDP., • Verify cable numbers for every cable and maintain Configuration Management of the cables., • Suggest options and alternatives for cabling when required., • Provide Power Sourcing requirements to support delivery of the TDP., • Develop Power Point presentations as required., • Participate in ship checks to accomplish cabling/electrical surveys to support TDP development., • Participate in meetings and phone conferences when required by the government sponsor., • Assist in the resolution of cabling issues occurring on the waterfront during equipment installations.\n Minimum Qualifications • 0 years experience with Bachelors in related field., • Client experience requirements: Between 0 to 6 years of relevant experience., • Client education requirements: BA/BS degree in Engineering, Electronics, Telecommunications, Marine or Naval Architecture, or a relevant field; Candidate must have an undergraduate degree from an ABET accredited program., • 4 years of additional equivalent experience can be substituted for a BA/BS degree., • Ability to obtain and maintain a Secret Security Clearance., • Proficiency in CAD software., • Strong analytical and problem-solving abilities., • Excellent written and verbal communication skills., • Ability to work effectively both independently and as part of a team., • A proactive and eager-to-learn attitude.\n Preferred Requirements • An active Secret Security Clearance., • Experience in cable design, installation, and maintenance., • Knowledge of electrical codes, standards, and safety practices., • Familiarity with shipbuilding or industrial environments., • Experience with cable testing equipment.\n HII is more than a job - it's an opportunity to build a new future. We offer competitive benefits such as best-in-class medical, dental and vision plan choices; wellness resources; employee assistance programs; Savings Plan Options (401(k)); financial planning tools, life insurance; employee discounts; paid holidays and paid time off; tuition reimbursement; as well as early childhood and post-secondary education scholarships. Bonus/other non-recurrent compensation is occasionally offered for qualified positions, and if applicable to this role will be addressed by the recruiter at the screening phase of application. The listed salary range for this role is intended as a good faith estimate based on the role's location, expectations, and responsibilities. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to [email protected] and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this email address. Additionally, you may also call 1-844-849-8463 for assistance. Press #3 for HII Mission Technologies.

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Electrical Installations, Electrical Systems, Motor Repair Certifications: Certified Welder (CWP) | American Welding Society (AWS) - American Welding Society (AWS) Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Marine Electrician (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Marine Electrician (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOD type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of Defense Personnel Security Clearance (PCL) at the confidential level or higher. Marine Electricians Non-Nuclear Electrical Work (TSD EW): Install, modify, repair, troubleshoot and test various electrical and electronics systems, circuits, controls, instruments and equipment. Also includes installation of wire ways and cabling. Marine Electricians Generator/Motor Repair, Electrical (TSD E4): Shop work such as disassembly, inspection, test, cleaning, varnishing, baking, and reassembly, and shipboard investigate/repair generators, motors, and transformers electrical component. Marine Electricians Topside Electrical Work (TSD TZ): Remove, Disassemble, inspect, repair, adjust, test, and install external electrical systems cabling in tanks, voids, and sails. Includes installation of hull fittings, penetrators, and tank level indicators. Marine Electrician Tasks TSD EW (Non-nuclear Electrical Work): Remove, modify, and install electrical equipment Remove, install, groom, and band wireways and cabling Pack and unpack equipment and bulkhead penetrations Repair electrical equipment and cabling Utilize electrical checks to test and troubleshoot electrical systems Disconnect, groom, and reconnect wiring TSD E4 (Generator/Motor Repair, Electrical): Disassemble and replace motor and generator components Troubleshoot, modify and adjust motors and generators Balance motor and generator components Insulate using mechanical and dip methods Stone and bevel commutator and slip rings Assemble motor and generator components TSD TZ (Topside Electrical Work): Remove, modify, and install electrical equipment Disconnect, remove, install, groom, band, and reconnect wireways and cabling Utilize electrical checks to test electrical systems Remove, install, and test hull fittings, penetrations, and tank level indicators Marine Electrician Skill Requirements TSD EW (Non-nuclear Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD EW. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD E4 (Generator/Motor Repair, Electrical): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD E4. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD TZ (Topside Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD TZ. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Scaffolding Safety, Ship Maintenance, Ship Repair Certifications: Certified Welder (CWP) | American Welding Society (AWS) - American Welding Society (AWS) Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Welder (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Welder (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Welder Tasks \n • Perform structural welding of deck structures, support braces, foundations, or hangers using one of a number of processes such as shielded metal arc welding (SMAW) or gas tungsten arc welding (GTAW) onboard submarines, in buildings and in the field.\n, • Prepare finished welds by hand grinding or burring to meet visual acceptance standards.\n, • Set up and operate stud welding equipment as needed onboard submarines, in buildings and in the field.\n, • Install hot work protection and/or build weld containments for fire prevention.\n, • Perform firewatch duties during welding operations.\n\n Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Welder Skill Requirements At least 2 years of experience welding in a heavy industrial work environment such as ship building, power plant construction, commercial building construction or bridge construction. Qualified per Technical Publication S9074-AQ-GIB-010/248 with the following essential elements: Welder Qualification record verifying tests performed in three positions. Alternatively, the welder tests may be performed in the 6G position (from TP-248) provided the test is performed using a singular weld process. No dual process qualifications will be accepted. The welder qualification test record shall include at least the following information: Welder Identification (Full Name at a minimum) Date of test Qualification Test thickness - test assembly thickness .375" or higher Qualification test process (SMAW, GTAW, or GMAW as applicable) Qualification test position (2G, 3G, 4G, or 6G) Qualification test base material type Qualification test filler material type and size Qualification test results Certifying signature (fabricator, test administrator or quality assurance officer attesting to test conditions and results) The welder qualification test shall be performed as follows: \n • The qualification testing shall have been performed with an approved Butt weld joint design from MIL-STD 22\n, • The filler material to be used during testing shall be MIL-9018-M, 10018M, 10718M, 11018M, 12018M or 14018M for the SMAW process\n\n The filler material to be used during testing shall be MIL-100S-1, 100S-2, 120S-1, or 140S-2 for the GTAW or GMAW process. The Qualification Test shall be evaluated IAW with the requirements contained in S9074-A-GIB018/248 (performed IAW T9074-AS-GIB-010/271, (TP 271) evaluated to class 1 requirements of MIL-STD 2035). Qualification tests shall be evaluated visually and by Radiography, ultrasonically, or by bend testing. The qualification shall have been maintained by actual use of the welding process quarterly (evidence of maintenance for process use shall be maintained for the current and preceding quarter) Jaeger J-1 or equivalent Annual Vision certification (glasses or no glasses) Undergo training to self-identify and correct poor workmanship. This training is a 40-hour course that includes a written and practical examination. A grade of 80% or better is required on each to be considered passing. Trained, qualified fit to wear respiratory protection devices IAW 29 CFR 1910.134 (Subpart I). Welder Technical Standards National Fire Protection Association (NFPA) Standard 51B, 2014 Edition - Standard for Fire Prevention during Welding, Cutting and Other Hot Work. ANSI/ASC Z49.1-2005 - Safety in Welding, Cutting, and Allied Processes NAVSEA S9086-CH-STM-010, Chapter 074 - Welding and Allied Processes Compressed Gas Association (CGA) SB-11 - Use of Rubber Welding Hose NAVSEA Tech Pub S9074-AQ-GIB-010/248 NAVSEA Tech Pub S9074• AR-GIB-010/278 NAVSEA Tech Pub T9074-AD-GIB-010/1688 29 CFR 1910.134 Respiratory Protection 9.3.9.4 Required Trade Skill Training Blueprint Reading Electrical Safety for Non-electrical workers Layout Procedures Set-up & Use of Hot Work Containments Stud-shooting techniques Selecting and Wearing Respirators GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to four years of applicable welding experience\n, • ASNT NDT Level III Certification.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n\n Possible travel locations include the below but not limited to: \n • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

1st Class Pipe Welder - Weld America Purpose: Weld America, a division of Colonna's Shipyard, is seeking 1st Class Pipe Welders to support operations on local (Norfolk, VA) and non-local projects. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding procedures, or oral instructions, using electric arc-welding equipment., • Select and execute best method to prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter and to clean, degrease, deoxidize, or desmut weld joint or work piece, using wire brush, portable grinder, or solvent clean/chemical bath, • Weld completion in flat, horizontal, vertical, or overhead positions for at least three base materials using a wide variety of processes., • Fabricate brackets, panels, complex beams and shape structures., • Plumb transverse bulkheads and panels to fabricate enclosures, complex weldments, shapes, plates, simple and complex parts from a drawing or sketch., • Operate and set up of the following equipment; hydraulic jacks and pumps, chain falls, come a longs, Steamboat Ratchets, and slings., • Expertly repair base metal products and completed welds by adding the minimum amount of weld metal or heat and the minimum amount of grinding/smoothing to meet job specification., • Also perform air-arc back gouging and oxy-acetylene torching (e.g. brazing, cutting, or pre-heating), GTAW (Gas Tungsten Arc Welding), and pipe welding, pipe flange and socket welding; as well as qualify to perform either flux cored inner shield welding, weld overlay cladding, automated back gouging, plasma back gouging or any combination thereof., • Mark or tag material with proper job number, piece marks, and other identifying marks as required and always mark completed welds with welder number., • Perform single pass 5/16-inch minimum fillet welds in all positions using FCAW on carbon steel and at least ¼-inch single-pass fillets on two other materials., • Supervise set up to perform welding in accordance with applicable WPS all welding equipment such as: wire feeders, Sub-arc tractors, Bug O's, Power sources, etc., • Clean torches and connect/lay-out cables and whips to optimize performance and perform routine maintenance on all equipment., • Recommend WPSs and WPS upgrades required for a job; when assigned, produces or supervises production, documentation, and testing of PQRs and WPQs., • Reliable, leads by example; trains less-killed welders, enforces good workmanship and safe welding practices throughout the work area; identifies gaps in weld process controls and weld process surveillance inspections and recommends corrective action., • Perform comprehensive workmanship inspection, and when directed those of others, of all welds grinding and joint preparation for NDT processes as applicable; observe QA/NDT hold points as applicable., • Complete standard dimensional computations/ Devise bracing and weld sequencing steps to maintain tolerances and minimize distortions., • Must have at least seven (7) years of Pipe Welding experience., • Must be able to successfully demonstrate TIG CuNi (copper nickel) pipe welding., • Must have experience working in physically demanding environments., • Must have at least 3 years of experience using SMAW (Shielded Metal Arc Welding) or Gas Tungsten Arc (GTAW) welding., • Must be able to work weekends and overtime, as needed., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of two to three years of applicable welding experience\n, • ASNT NDT Level III Certification, or relevant experience.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of two to three years of applicable welding experience\n, • ASNT NDT Level III Certification, or relevant experience.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of 1-2 years of applicable welding experience\n, • ASNT NDT Level I Certification, or relevant experience.\n, • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Field Service and Support Job Qualifications: Skills: Electrical Installations, Electrical Systems, Motor Repair Certifications: Certified Welder (CWP) | American Welding Society (AWS) - American Welding Society (AWS) Experience: 2 + years of related experience US Citizenship Required: Yes Job Description: Marine Electrician (US Navy Submarine) Onsite Locations: Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Marine Electrician (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. Requirements \n • 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned.\n, • HS/GED\n, • Must be US Citizen.\n, • Must be able to obtain and maintain Secret Clearance\n\n Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOD type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of Defense Personnel Security Clearance (PCL) at the confidential level or higher. Marine Electricians Non-Nuclear Electrical Work (TSD EW): Install, modify, repair, troubleshoot and test various electrical and electronics systems, circuits, controls, instruments and equipment. Also includes installation of wire ways and cabling. Marine Electricians Generator/Motor Repair, Electrical (TSD E4): Shop work such as disassembly, inspection, test, cleaning, varnishing, baking, and reassembly, and shipboard investigate/repair generators, motors, and transformers electrical component. Marine Electricians Topside Electrical Work (TSD TZ): Remove, Disassemble, inspect, repair, adjust, test, and install external electrical systems cabling in tanks, voids, and sails. Includes installation of hull fittings, penetrators, and tank level indicators. Marine Electrician Tasks TSD EW (Non-nuclear Electrical Work): Remove, modify, and install electrical equipment Remove, install, groom, and band wireways and cabling Pack and unpack equipment and bulkhead penetrations Repair electrical equipment and cabling Utilize electrical checks to test and troubleshoot electrical systems Disconnect, groom, and reconnect wiring TSD E4 (Generator/Motor Repair, Electrical): Disassemble and replace motor and generator components Troubleshoot, modify and adjust motors and generators Balance motor and generator components Insulate using mechanical and dip methods Stone and bevel commutator and slip rings Assemble motor and generator components TSD TZ (Topside Electrical Work): Remove, modify, and install electrical equipment Disconnect, remove, install, groom, band, and reconnect wireways and cabling Utilize electrical checks to test electrical systems Remove, install, and test hull fittings, penetrations, and tank level indicators Marine Electrician Skill Requirements TSD EW (Non-nuclear Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD EW. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD E4 (Generator/Motor Repair, Electrical): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD E4. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). TSD TZ (Topside Electrical Work): Trained, qualified and have experience with all tasks and components similar to that outlined for TSD TZ. Trained and experienced in cutting in cables and hooking up equipment, panels, and boxes IAW Navy Standard Methods Drawings Experience performing SUBSAFE work IAW NAVSEA 0924-062-0010 L/R (Submarine Safety Requirements Manual). GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. • Growth: AI-powered career tool that identifies career steps and learning opportunities, • Support: An internal mobility team focused on helping you achieve your career goals, • Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off, • Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. #SubAIT #hireshipyardcareersgdit The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 50-75% T elecommuting Options: Onsite Work Location: USA VA Portsmouth Additional Work Locations: USA GA Kings Bay, USA HI Pearl Harbor, USA ME Bath, USA WA Bremerton Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job DescriptionSummary GAMA-1 Technologies, LLC seeks a detail-oriented and motivated Junior System Administrator to support the administration, maintenance, and monitoring of IT systems and infrastructure in a remote environment. The Junior System Administrator will assist with the installation, configuration, troubleshooting, and documentation of systems under the supervision of senior administrators, ensuring compliance with federal cybersecurity and operational standards. This is an entry-level position designed for individuals beginning their IT careers. The role offers exposure to enterprise IT operations, cybersecurity compliance, and system administration in a mission-driven federal setting. Supervisory Responsibilities – None Essential functions/responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. • Assist in the setup, configuration, and maintenance of Windows and Linux servers, applications, and related components., • Support user account creation, permissions, and access management within Active Directory and other directory services., • Monitor system performance, availability, and capacity using standard tools and dashboards., • Perform routine updates, patch management, and basic system maintenance tasks in accordance with agency security requirements., • Help maintain system documentation, configuration records, and asset inventories., • Provide support for end users, escalating complex issues as needed., • Assist with backup, recovery, and disaster recovery (DR) procedures under supervision., • Participate in security scans and compliance checks, ensuring adherence to federal and organizational policies., • Collaborate with network, security, and cloud teams on technical support and system improvement initiatives., • Contribute to the development and refinement of standard operating procedures (SOPs)., • Respond and document cloud application issues escalated by Tier 1 resources or captured by cloud monitoring tools., • Off-Hours Support: Participate in on-call rotation for after-hours or weekend support., • Continuously monitor cloud activity, usage, performance, cost, and security using cloud monitoring tools and technology., • Triage, troubleshoot, and resolve application performance issues, escalating as needed to resolve more complex issues.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Information Security and Confidentiality Obligations • Bachelor’s degree in Computer Science, Information Systems, or related field (or equivalent experience)., • 0-2 years of experience in in IT support, help desk operations, or system administration., • Foundational knowledge of Windows Server, Linux systems, and networking fundamentals., • Basic understanding of federal IT compliance and security frameworks., • Strong problem-solving skills and ability to follow technical procedures accurately., • Excellent communication, documentation, and customer service skills., • Understanding of networking protocols, LAN networking, and WAN networking., • Ability to evaluate networks and systems to make sure that they perform reliably and to anticipate new requirements as organizations’ needs change., • Internship or academic experience supporting federal or enterprise IT systems., • Entry-level certifications such as CompTIA A+, Network+, or Security+, Microsoft Certified: Azure Fundamentals (AZ-900), AWS Certified Cloud Practitioner, Linux Essentials or Red Hat Certified System Administrator (RHCSA)., • Prolonged periods of sitting at a desk and working on a computer. Proficiency Requirement ABOUT GAMA-1 GAMA-1 is a rapidly growing technology business that is based in Greenbelt, Maryland. GAMA-1 Technologies provides strategic information assurance, information security, and business enterprise and networking solutions to the Federal Government. Our success is based on the utilization of industry and agency standards, establishment of standardized processes, and IT Services expertise. At GAMA-1, we believe employees should grow, achieve, and develop just as the company grows, achieves, and develops. GAMA-1 is committed to providing our employees with opportunities for career advancement throughout their employment. For more information, visit GAMA-1 is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to: veteran status, uniformed servicemember status, race, color, religion, sex, sexual orientation, gender identity, age, pregnancy (including childbirth, lactation and related medical conditions), national origin or ancestry, citizenship or immigration status, physical or mental disability, genetic information (including testing and characteristics), domestic violence victims, political orientation, status as a smoker or tobacco user, hairstyle, use of a service animal, education status, familial status, HIV/AIDS status, height, weight, reproductive healthcare decisions or any other category protected by federal, state or local law. Powered by JazzHR SRW6Vc0i4y

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Clearance Requirement: Ability to obtain and maintain a Secret Clearance Travel Requirements: Limited, but must be able and willing to support division travel to trade shows and customer sites Location: Norfolk, VA SUMMARY: WR has an opportunity for a GIS Software Engineer, Basic to support the desi

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Whether you’re looking for a side hustl

Clearance Requirement: Ability to obtain and maintain a Secret Clearance Travel Requirements: Limited, but must be able and willing to support division travel to trade shows and customer sites Location: Norfolk, VA SUMMARY: WR has an opportunity for a GIS Software Engineer, Lead to support the desig