Trabajos chemist en Norfolk, VirginiaCrear alertas

Job Description Labor One is seeking to hire Fire Watch / Tank Watch (Red Badge) The Fire Watch / Tank Watch Specialist ensures the safety of personnel and equipment during hot work, confined space, and preservation operations aboard U.S. Navy vessels and associated facilities. This position provides continuous monitoring of fire and confined-space hazards, enforces all NAVSEA, OSHA, and AMP United safety procedures, and maintains compliance with NAVSEA Standard Items 009-07 and 009-74, as well as 29 CFR 1915 Subpart P (Fire Protection in Shipyard Employment). Strong situational awareness and ability to remain focused for extended periods. Effective verbal communication with supervisors and entrants via radio or direct voice. Ability to enforce safety boundaries and take decisive action in emergency conditions. Accurate documentation and attention to detail when completing watch logs and checklists. Understanding of Navy ship compartments, labeling, and restricted-area protocols. Essential Duties & Responsibilities: * Maintain continuous watch at designated hot work or confined space locations for the full duration of the operation. * Verify that Hot Work Permits, Confined Space Entry Permits, and Gas-Free Certificates are valid, current, and posted. * Ensure that all required atmospheric testing has been performed and documented by a Shipyard Competent Person or Marine Chemist prior to entry and at required intervals. * Monitor atmospheric conditions and ensure proper ventilation and lighting are established and maintained throughout the job. * Control access to assigned areas, ensuring only authorized personnel enter the workspace. * Remain alert for signs of fire, smoke, fumes, or unsafe atmospheric changes; immediately stop work and notify supervision if unsafe conditions occur. * Know how to operate and inspect fire extinguishers; identify and use the correct extinguishing agent for each class of fire per NSTM 555 (V1/V2). * Understand procedures for sounding alarms, contacting the Officer of the Deck (OOD), and guiding response personnel back to the scene. * Remain on station for at least 30 minutes after completion of hot work to ensure no smoldering or re-ignition occurs. * Maintain accurate log entries for atmospheric readings, ventilation checks, personnel entry/exit times, and fire-watch intervals. * Participate in pre-job briefs, toolbox talks, and post-job debriefs with AMP United and NNSY Supervisors. * Comply with all PPE, respiratory protection, and fall-protection requirements. * Support AMP United's zero-incident culture through active participation in hazard identification and housekeeping. Training and Certification Requirements: * Fire Watch Qualification Course * Hazard Communication * Respiratory Protection * Fall Protection * Fire Watch / Tank Watch * Shipyard Mandatory Annual Training * First Aid / CPR certification Security and Access Requirements * Must be a U.S. Citizen and pass all background, drug, and security checks. * Must possess a Secret Clearance. Education and Experience * High school diploma or equivalent. * Prior experience as a Fire Watch, Tank Watch, or Preservation Laborer in a shipyard or industrial environment. At least 1 year of experience. * Familiarity with NAVSEA Standard Items. Submit your resume to or

Job DescriptionSalary: $27.23 - 32.16/hr Summary Pipefitters are responsible for installing, fitting, and assembling piping systems made of materials such as steel, galvanized, copper, copper-nickel, and stainless steel, in a safe and efficient manner. Work is performed using appropriate tools, valves, and fittings, following technical drawings, blueprints, and specifications to ensure accurate and compliant system installations. 1st Class Mechanics are expected to independently receive assignments, plan the work, identify material requirements, and execute tasks efficiently and accurately. Duties & Responsibilities • Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and Tcnico safety policies., • Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to:, • Company policies and procedures, • Local, state, and federal regulations, • ABS, USCG, NAVSEA Standard Items, and MSC GTRs, • ASME/ANSI Codes and OEM Specifications, • MIL-STD (e.g., 777E, 22D, 1627), • General Specifications for Overhaul of Ships, • Applicable special procedures (e.g., pipe bending (Mil-STD-1627), brazed systems (7000)), • Perform layout, fabrication, installation, modification, testing, and repair of piping systems using various materials (copper, CuNi, CRES, steel, etc.)., • Proficient at reading and interpreting blueprints, drawings, and sketches; create fabrication sketches and targets for new installations and mock-ups., • Install systems with or without blueprints, including building mock-ups and off-site prefabrication., • Ability to troubleshoot and resolve issues related to pipe fitting removals and installation., • Prepare pipe joints for welding, brazing, soldering, threading or gluing, ensuring adherence to required tolerances., • Operate pipe bending machines and torches; fabricate and install pipe hangers and supports., • Proficient at performing air, hydrostatic, static and operational tests on piping systems in accordance with safety and quality standards, including 009-71., • Calculate joint allowances, take-offs, and tolerances for butt welds, socket welds, braze and threaded joints., • Must be proficient in performing silver brazing (Grades 3, 4, and 5) and installing various MAF fittings., • Work independently and safely, following all applicable procedures, specifications, and safety regulations., • Must have the ability to use hand tools and instruments associated with the Pipefitting trade including but not limited to, pipe benders, bandsaws, grinders, drills and pipe threaders. Also possess and maintain personal hand tools necessary to accomplish their trade., • Read and interpret Chemist and Competent Person reports to ensure safe conditions for hot work., • Conduct self-inspections to ensure work meets quality standards and complies with applicable drawings and specifications., • Provide guidance and train junior craftsmen, providing direction as a senior mechanic when required., • Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Certification Requirements • Must be certified to braze (Grade 3, Grade 4, and Grade 5), • 4 - 6 years of experience as a Pipefitter in a shipyard. (1st Class), • 2 - 4 years of experience as a Pipefitter in a shipyard (2nd Class), • 1 - 3 years of experience as a Pipefitter in a shipyard. (3rd Class) Other Requirements • Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes., • Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols., • Regularly required to sit, reach, and use hands for handling or operating tools and equipment., • Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids)., • Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads., • Must be able to pass Drug Screening, Work Ability Screening., • Must be able to obtain a Government facility security pass and badges at the various shipyards Tcnico works at (e.g., MHI, BAE, NASSCO, HII)., • Availability to work overtime, weekends, or travel to alternate worksites when project needs demand., • Perform other duties as assigned.

Shift: Monday through Friday, 8:00AM - 5:00PM Are you ready to work making the world a safer, healthier place? Join our mission to continuously move science forward; to innovate and advance all aspects of our business to improve the health and safety of our communities and lives. Make an impact. Build a career. At Pace, everything we do is built upon an unwavering commitment to making the world a safer, healthier place. We continually work to develop innovative practices that drive sustainability and empower our partners with accurate, quality data at every critical moment and milestone. That's why we need you - your curiosity, your talents, and your drive - to help us advance this important work, and your career. Find your place at Pace Join us as a Analytical Chemist, where you'll put your love of science to work in the Scientific Insourcing Solutions division. You'll receive all the training you need to successfully take on your new role and grow an exciting laboratory sciences career at Pace. A candidate for this role will support an organics laboratory in environmental services and equipment management. Compensation: $27.00 - 30.00 per hour NOTE: Location is Portsmouth, VA Responsibilities: • Prepare chemical samples for analytical procedures (volatiles/non-volatiles), • Conduct sample analysis using Gas Chromatography-Mass Spectrometry (GC-MS) and Gas Chromatography (GC), • Clean, maintain, and calibrate laboratory instruments to ensure optimal performance, • Support the administration of air, water, and soil sample analysis using standard chemistry and biochemistry techniques, • Maintain accurate, detailed, and organized documentation of all laboratory activities and results Requirements: • Minimum requirement: BS degree in Chemistry, Biology, Biochemistry, or a related degree, • 1-2 years of GC (Gas Chromatography) and ICP (Inductively Coupled Plasma) experience, • Able to handle multiple projects concurrently, self-motivated, and results driven, • Mechanically inclined with experience using common hand tools, • Proficiency in Office 365 and other software preferred, • Able to communicate effectively, • Excellent organizational and task management skills Find Your Place at Pace - We need you - your curiosity, your talents, and your drive - to help us advance this important work. Benefits When you join Pace, you commit to work that makes a positive impact on our communities and our world. We commit to supporting you with benefits and perks that make a positive impact on your life. Full-time roles are eligible for our comprehensive benefits program which includes competitive salaries, medical, dental vision, 401K retirement savings plan (100% vested immediately in the employer match), life, disability and voluntary benefits, paid time off for holiday, sick and vacation days, HSA, wellness program, flexible spending accounts, tuition reimbursement, Employee Assistance program, parental leave, optional legal coverage and ID theft. Equal Opportunity Employer Pace provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, creed, color, religion, genetics, protected veteran status, national origin, sex, age, disability, marital status, sexual orientation, gender identity or expression, citizenship, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Crane and Rigging Foreman Purpose: Colonna's Shipyard is seeking a Crane and Rigging Foreman to oversee the Rigging Shop in Norfolk, VA. Position Summary: First level on-site supervisory role that assigns, coordinates, trains, and evaluates team of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge to support production in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. Essential Duties and Responsibilities: Key responsibilities include: • Manages key activities in the employee lifecycle for all direct reports (timekeeping, job assignments, training, performance management, coaching/counselling, supervision, etc.) and ensure employees have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • Breaks broader production strategies down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc., • Interpret company policy to workers and enforce safety and environmental regulations, specifications, blueprints, sketches, and work orders to employees., • Recommend measures to improve production methods, equipment performance, and quality of customer product., • Suggest changes in working conditions and use of equipment to increase efficiency of workers., • Carry out supervisory responsibilities in accordance with the organization's policies and applicable laws., • Plan, assign, and direct all work., • Address complaints and resolve them as needed., • Monitor and support all shop projects maintaining high quality, on time delivery, safety and staying within budget., • Understanding and adhering to the defined scope of work., • Follow company procedures regarding material procurement and return; pre-planning equipment and material needs., • Provides daily updates to management to support POD development and execution., • Review project specifications/SOWs and order all project materials in accordance with contract requirements and associated references., • Generates and submits production reports, meeting all technical/customer requirements, to management., • Ensure tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Responsible for project's chemist certificate, daily CPs, and hot work permits., • Manages and initiates QA/Customer calls out and attends/executes TIP inspections., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must be able to understand job specifications, drawings, and corresponding technical references., • Must have knowledge of weight testing in accordance with specified technical manuals for equipment such as cranes, davits, winches, anchors, anchor chains, shafts, and propellers., • Must be familiar OSHA and NAVSEA standards., • Some previous supervisory/mentoring experience (such as make-up supervisor), • Knowledge of inspection procedures for structural components, booms, jibs, gears, drums, sheaves, blocks, hooks, operating mechanisms, hydraulic and pneumatic systems, hydraulic cylinders, wire rope, and operational aids preferred., • Crane signaling certification (mobile and overhead) preferred., • Ability to obtain and maintain access to Government Facilities (DBIDS)., • Must be an US Citizen.\n\n Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Structural Shop Foreman - Welding/Plate Purpose: Colonna's Shipyard is seeking an Structural Foreman to oversee the Structural Shop in Norfolk, VA. Position Summary: First level on-site supervisory role that assigns, coordinates, trains, and evaluates team of semi-skilled and skilled trades personnel according to their ability, experience, and job knowledge to support production in ship repair/industrial fabrication operations. The position is located onsite in Norfolk VA and will often require hours beyond a standard work week with flexible schedule availability to support production/operations. Position may require limited travel. Essential Duties and Responsibilities: Key responsibilities include: • Manages key activities in the employee lifecycle for all direct reports (timekeeping, job assignments, training, performance management, coaching/counselling, supervision, etc.) and ensure employees have all necessary tools, equipment, work procedures, etc. to work safely and efficiently., • Breaks broader production strategies down to practical action plans to support safety, quality, cost, and schedule goals while providing constant monitoring of job sites., • Evaluates job sites and work environments prior to work starting to ensure safe project set ups and efficient work evolutions., • Responsible for understanding and complying with all technical aspects of the job including adherence to all contract requirements, drawings, procedures/work instructions, etc., • Directly supervise steel employees in work daily tasks to verify and ensure conformance to specifications, drawings, procedures, and quality, schedule, and budget., • Interpret company policy to workers and enforce safety and environmental regulations, specifications, blueprints, sketches, and work orders to employees., • Recommend measures to improve production methods, equipment performance, and quality of customer product., • Suggest changes in working conditions and use of equipment to increase efficiency of workers., • Carry out supervisory responsibilities in accordance with the organization's policies and applicable laws., • Plan, assign, and direct all work., • Address complaints and resolve them as needed., • Planning and preparing a fabrication shop schedule for all known and anticipated work, based on staffing and material resources., • Layout mild steel and stainless steel heavy and light structure, frames, skids, piping and other projects for fabrication., • Monitor and support all shop projects maintaining high quality, on time delivery, safety and staying within budget., • Understanding and adhering to the defined scope of work., • Follow company procedures regarding material procurement and return; pre-planning equipment and material needs., • Provides daily updates to management to support POD development and execution., • Review project specifications/SOWs and order all project materials in accordance with contract requirements and associated references., • Generates and submits production reports, meeting all technical/customer requirements, to management., • Ensure tools/resources are mobilized and demobilized from project appropriately, providing updates on damaged or lost equipment., • Responsible for project's chemist certificate, daily CPs, and hot work permits., • Manages and initiates QA/Customer calls out and attends/executes TIP inspections., • Must have a Bachelors or Registered Apprentice (grad) or HS and at least 6 years related trade experience (in the trade to be supervised)., • Must be able to understand job specifications, drawings, and corresponding technical references., • Must have regular, reliable attendance., • Must be experienced in QA/QC programs and procedures., • Must have expert level knowledge of all welding methods, procedures, and quality control., • Must have working knowledge of design principles, AMSE/AWS codes, and safety standards., • Ability to obtain and maintain access to Government Facilities (DBIDS)., • Must be an US Citizen.\n\n Physical Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

1st Class Structural Welder (2nd Shift) Purpose: Colonna's Shipyard, is seeking a 1st Class Structural Welder to support 2nd Shift operations in our Shipyard in Norfolk, VA. *This position will support 2nd shift operations (3:30PM - 12:00AM). Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment., • Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter., • Weld completion in flat, horizontal, vertical, or overhead positions., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Manually apply filler rod to supply weld metal., • Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes., • Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed., • Preform grinding and joint preparation for NDT processes., • Burning, washing, edge prepping using hand and automated equipment., • Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange., • Construct or repair metal products by joining parts either manual (using a variety of welding methods including electric arc, MIG and TIG welding or oxy-acetylene welding) or by machine., • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work., • Preforms grinding and joint preparation for NDT processes., • Mark or tag material with proper job number, piece marks, and other identifying marks as required., • Will be required to wear personal protective equipment hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator., • Must have at least seven (7) years' experience as a Welder., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding), • Must have knowledge of welding techniques (oxygen-acetylene, electric arc, and TIG), tools and equipment, • Must have knowledge of and ability to use hand tools and instruments associated with the trade, • Must be able to work effectively with others., • Must be able to comprehend blueprints, sketches, and templates., • Must have ability to enter and move through manholes to reach and work in internally confined spaces., • Must be a steady, reliable worker., • Must be able to instructions., • Prefer previous technical training., • DBIDS eligibility preferred. \n\n Security: • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard Inc., and its divisions, are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

1st Class Structural Welder Purpose: Colonna's Shipyard, is seeking a 1st Class Structural Welder to support 1st shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment., • Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter., • Weld completion in flat, horizontal, vertical, or overhead positions., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Manually apply filler rod to supply weld metal., • Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes., • Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed., • Preform grinding and joint preparation for NDT processes., • Burning, washing, edge prepping using hand and automated equipment., • Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange., • Construct or repair metal products by joining parts either manual (using a variety of welding methods including electric arc, MIG and TIG welding or oxy-acetylene welding) or by machine., • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work., • Preforms grinding and joint preparation for NDT processes., • Mark or tag material with proper job number, piece marks, and other identifying marks as required., • Will be required to wear personal protective equipment hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator., • Must have at least seven (7) years' experience as a Welder., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding), • Must have knowledge of welding techniques (oxygen-acetylene, electric arc, and TIG), tools and equipment, • Must have knowledge of and ability to use hand tools and instruments associated with the trade, • Must be able to work effectively with others., • Must be able to comprehend blueprints, sketches, and templates., • Must have ability to enter and move through manholes to reach and work in internally confined spaces., • Must be a steady, reliable worker., • Must be able to instructions., • Prefer previous technical training., • DBIDS eligibility preferred. \n\n Security: • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

1st Class Structural Welder - Steel America Purpose: Steel America, a division of Colonna's Shipyard, is seeking a 1st Class Structural Welder to support operations in the Inside Machine Shop at our site in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by blueprints, weld symbols, material markings, work order, welding procedures, or verbal instructions, using welding equipment., • Prepare all material surfaces to be welded, ensuring that there is no loose or thick mil scale, slag, rust, moisture, grease, or other foreign matter., • Complete weld processes in flat, horizontal, vertical, or overhead positions., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas metal arc, flux-cored arc, shielded metal arc, and submerged arc welding., • Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes., • Set up and operate welding equipment and select proper electrodes according to material types to be joined and procedurally required., • Preform grinding and joint preparation for NDT processes., • Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange., • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work., • Will be required to wear personal protective equipment hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator., • Instruct apprentices and fellow welders with job assignments and overall mentoring., • Be able to perform duties with little to no supervision., • Maintain a high level of first pass through rate on production welding inspections., • Must have at least seven (7) years' experience as a Welder., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding), • Must be able to demonstrate ability to perform GTAW 6G pipe welding and GMAW-P all positions., • Must have knowledge of welding techniques, mirror welding, preheat and inter-pass temperature, tools and equipment, • Must have knowledge of and ability to use hand tools and instruments associated with the trade to include but not limited to fillet weld gauges, V-WAC gauge, CAM Gauge, temp sticks, and preheat application tooling., • Must be able to work effectively and efficiently with others., • Must be able to comprehend weld sequence sketches, and templates., • Must have ability to enter and move through manholes to reach and work in internally confined spaces., • Must be a steady and reliable worker that maintains regular and consistent attendance., • Experience working with or around manual or CNC machinery highly preferred., • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

Shift: Monday through Friday, 8:00AM - 5:00PM Are you ready to work making the world a safer, healthier place? Join our mission to continuously move science forward; to innovate and advance all aspects of our business to improve the health and safety of our communities and lives. Make an impact. Build a career. At Pace®, everything we do is built upon an unwavering commitment to making the world a safer, healthier place. We continually work to develop innovative practices that drive sustainability and empower our partners with accurate, quality data at every critical moment and milestone. That’s why we need you — your curiosity, your talents, and your drive — to help us advance this important work, and your career. Find your place at Pace® Join us as a Analytical Chemist, where you’ll put your love of science to work in the Scientific Insourcing Solutions division. You’ll receive all the training you need to successfully take on your new role and grow an exciting laboratory sciences career at Pace®. A candidate for this role will support an organics laboratory in environmental services and equipment management. Compensation: $27.00 - 30.00 per hour NOTE: Location is Portsmouth, VA Responsibilities: • Prepare chemical samples for analytical procedures (volatiles/non-volatiles), • Conduct sample analysis using Gas Chromatography-Mass Spectrometry (GC-MS) and Gas Chromatography (GC), • Clean, maintain, and calibrate laboratory instruments to ensure optimal performance, • Support the administration of air, water, and soil sample analysis using standard chemistry and biochemistry techniques, • Maintain accurate, detailed, and organized documentation of all laboratory activities and results Requirements: • Minimum requirement: BS degree in Chemistry, Biology, Biochemistry, or a related degree, • 1-2 years of GC (Gas Chromatography) and ICP (Inductively Coupled Plasma) experience, • Able to handle multiple projects concurrently, self-motivated, and results driven, • Mechanically inclined with experience using common hand tools, • Proficiency in Office 365 and other software preferred, • Able to communicate effectively, • Excellent organizational and task management skills Find Your Place at Pace - We need you - your curiosity, your talents, and your drive - to help us advance this important work. Benefits When you join Pace®, you commit to work that makes a positive impact on our communities and our world. We commit to supporting you with benefits and perks that make a positive impact on your life. Full-time roles are eligible for our comprehensive benefits program which includes competitive salaries, medical, dental vision, 401K retirement savings plan (100% vested immediately in the employer match), life, disability and voluntary benefits, paid time off for holiday, sick and vacation days, HSA, wellness program, flexible spending accounts, tuition reimbursement, Employee Assistance program, parental leave, optional legal coverage and ID theft. Equal Opportunity Employer Pace® provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, creed, color, religion, genetics, protected veteran status, national origin, sex, age, disability, marital status, sexual orientation, gender identity or expression, citizenship, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

1st Class Combination Welder/Fitter - 2nd Shift Purpose: Colonna's Shipyard, is seeking a 1st Class Combination Welder/Fitter to support 2nd Shift operations in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by blueprints, weld symbols, material markings, work order, welding procedures, or verbal instructions, using welding equipment., • Interpret and lay out blueprints, check and fit materials, tack weld of small assemblies, aluminum and steel foundations., • Erect units and install structural items on ship ways., • Physical assembly in prefabrication and erection on the building site of individual structural elements or prefabricated panels and three-dimensional sub-assemblies., • Prepare all material surfaces to be welded, ensuring that there is no loose or thick mil scale, slag, rust, moisture, grease, or other foreign matter., • Complete weld processes in flat, horizontal, vertical, or overhead positions., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas metal arc, flux-cored arc, shielded metal arc, and submerged arc welding., • Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes., • Set up and operate welding equipment and select proper electrodes according to material types to be joined and procedurally required., • Preform grinding and joint preparation for NDT processes., • Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange., • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work., • Will be required to wear personal protective equipment hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator., • Instruct apprentices and fellow welders with job assignments and overall mentoring., • Be able to perform duties with little to no supervision., • Maintain a high level of first pass through rate on production welding inspections., • Must have at least seven (7) years' combined Welding and Shipfitting experience., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding), • Must have knowledge of welding techniques, mirror welding, preheat and inter-pass temperature, tools and equipment, • Must have knowledge of and ability to use hand tools and instruments associated with the trade to include but not limited to fillet weld gauges, cutting torches, heating torches, V-WAC gauge, CAM Gauge, temp sticks, and preheat application tooling., • Must be able to work effectively and efficiently with others., • Must be able to comprehend weld sequence sketches, and templates., • Must have ability to enter and move through manholes to reach and work in internally confined spaces., • Must be a steady and reliable worker that maintains regular and consistent attendance., • Prefer previous technical training., • Previous experience working in Steel America fabrication shop preferred., • New Aircraft Carrier Construction experience., • New Submarine Construction experience.\n\n Security Requirements: • Must be able to access Government facilities and obtain and maintain a DBIDS., • Position requires US Citizenship. \n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

1st Class Structural Welder Purpose: Colonna's Shipyard, is seeking a 1st Class Structural Welder to support 1st shift operations in our Shipyard in Norfolk, VA. Job Description: • Weld together metal components of products, as specified by layout, blueprints, diagram, work order, welding producers, or oral instructions, using electric arc-welding equipment., • Prepare all material surfaces to be welded, ensuring that there is no loose or think scale, slag, rust, moisture, grease, or other foreign matter., • Weld completion in flat, horizontal, vertical, or overhead positions., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Manually apply filler rod to supply weld metal., • Clean or degrease weld joint or work piece, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes., • Set up and operate welding equipment and select proper electrodes according to metals to be joined or as instructed., • Preform grinding and joint preparation for NDT processes., • Burning, washing, edge prepping using hand and automated equipment., • Flux cored inner shield and dual shield welding along with oxy-acetylene torching, air-arc, weld-wire gas, stick and pipe flange., • Construct or repair metal products by joining parts either manual (using a variety of welding methods including electric arc, MIG and TIG welding or oxy-acetylene welding) or by machine., • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work., • Preforms grinding and joint preparation for NDT processes., • Mark or tag material with proper job number, piece marks, and other identifying marks as required., • Will be required to wear personal protective equipment hard hat, safety glasses, steel toe boots/shoes and, when necessary, respirator., • Must have at least seven (7) years' experience as a Welder., • Must be able to demonstrate ability to perform multi-pass, all position fillet and butt welds using SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding) and FCAW (Flux Cored Arc Welding), • Must have knowledge of welding techniques (oxygen-acetylene, electric arc, and TIG), tools and equipment, • Must have knowledge of and ability to use hand tools and instruments associated with the trade, • Must be able to work effectively with others., • Must be able to comprehend blueprints, sketches, and templates., • Must have ability to enter and move through manholes to reach and work in internally confined spaces., • Must be a steady, reliable worker., • Must be able to instructions., • Prefer previous technical training., • DBIDS eligibility preferred. \n\n Security: • Position requires US Citizenship.\n\n Travel Requirements: • Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 20 lbs., • Must be physically agile to perform tasks in naval ships. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces, including enter and moving through manholes., • May ride ships at sea for extended periods, • Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels., • Frequent exposure to noise due to machinery and equipment., • Employee is required to operate trucks, forklifts & man-lifts., • While performing the duties of this job, you may frequently be required to stand, walk & sit; use hands or fingers; handle or feel; talk and hear. Occasionally required to reach with hands and arms, climb and balance, stoop, squat, kneel, twist and crawl., • Work in extreme temperatures and conditions. At times you will work in areas that have less adequate ventilation, • Frequent use of respirator., • Protective clothing or equipment and face shields or goggles shall be worn when welding, cutting, or working with molten metal.\n\n Respect, Pride, Truth, Family - These are our VALUES and the guidelines that make us a leader in our industry. We are pleased and confident in stating that our skilled employees are among the most respected experts in the ship repair industry. Colonna's Shipyard, Inc. is proud to be an Equal Employment Opportunity employer. We do not discriminate based upon race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. Additionally, Colonna's Shipyard provides a variety of benefits to support your best health, wellness, and future, to include medical/dental/vision options, company paid disability insurances, 401k with match, legal services, as well as company paid holidays and paid time off (PTO).

About Mercor’s talent network Join our Chemist Expert Network to connect with leading AI labs and companies seeking your expertise. About Mercor projects Experts in our network contribute to: - Training and evaluating AI models in Chemistry - Creating tasks and deliverables based on real-world

Job DescriptionSalary: $29.29 Hi-Vis Sheetmetal Mechanic Chesapeake, VA | Full-Time Summary The Hi-Vis Habitability Sheetmetal Mechanic specializes in the fabrication, installation, and finishing of high-visibility interior spaces aboard U.S. Navy ships. This position focuses on habitability improvements, including laminate work, decorative trim, marine furniture installation, bulkhead systems, false overhead systems and finishing details in premium spaces such as Captains Staterooms, Wardrooms, XO/CO cabins, and Flag Officer offices. Duties & Responsibilities • Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and Tcnico safety policies., • Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to:, • Company policies and procedures, • Local, state, and federal regulations, • ABS, NAVSEA Standard Items, and MSC GTRs, • MIL-STD (e.g., 1689-A, 2035), • General Specifications for Overhaul of Ships, • OSHA 2268, • Install various sheet metal outfitting components, including but not limited to bunks, lockers, desks, shelves and chairs., • Fabricate, cut, and install high-pressure laminate (HPL) surfaces for furniture, desktops, tables, bulkheads, and storage fixtures., • Install decorative crown molding, baseboards, and transition trim tailored to shipboard conditions., • Construct and install wainscoting systems, including layout, panel fabrication, scribing, and finishing., • Apply marine-grade wall coverings (vinyl, laminate, insulation-backed coverings, and acoustic panels) with high accuracy and clean finish., • Build, install, and align decorative bulkheads and panel systems, ensuring tight seams, clean edges, and proper structural reinforcement., • Fabricate and install marine furniture, including lockers, desks, credenzas, shelving, seating structures, berthing components, and cabinetry., • Construct and fit custom pieces designed for Flag Officer staterooms and VIP habitability spaces., • Modify and rework existing furniture to meet updated Navy specifications or modernization plans., • Install drawer systems, latches, hinges, closures, and shock-mounted components suited for shipboard movement and vibration., • Scribe and fit materials around curved or irregular bulkheads, overheads, and ships' structures for a seamless appearance., • Install decorative ceilings, soffits, and panel systems in high-visibility compartments., • Mount and secure components using marine-approved adhesives, mechanical fasteners, and NAVSEA-approved installation methods., • Conduct precision measurements using levels, squares, laser lines, and pattern templates to ensure professional finish quality., • Fabricate support structures, brackets, and reinforcement backing for installed furniture and wall systems., • Install metal framing for bulkheads and overheads prior to finishing work., • Cut, bend, and install sheet metal components necessary to support habitability furniture and interior systems., • Proficient at fitting, scribing, installing various foundations for furniture and sheet metal equipment to be welded or bolted., • Layout, fit and install false overheads (mechanically attached and drop ceilings) and false bulkheads made from aluminum, stainless and laminate. This includes the insulation of cribbing and grid work to support the false bulkheads and overheads., • Understanding and using a variety of portable and hand tools used in the trade. Also possess and maintain personal hand tools necessary to accomplish their trade., • Read and interpret Chemist and Competent Person reports to ensure safe conditions for hot work., • Conduct self-inspections to ensure work meets quality standards and complies with applicable drawings and specifications., • Provide guidance and train junior craftsmen, providing direction as a senior mechanic when required., • Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Experience Requirements • 4 - 6 years of experience as a Sheetmetal Mechanic in a shipyard. Other Requirements • Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes., • Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols., • Regularly required to sit, reach, and use hands for handling or operating tools and equipment., • Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids)., • Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads., • Must be able to pass Drug Screening, Work Ability Screening., • Must be able to obtain a Government facility security pass and badges at the various shipyards Tcnico works at (e.g., MHI, BAE, NASSCO, HII)., • Availability to work overtime, weekends, or travel to alternate worksites when project needs demand., • Perform other duties as assigned.

The ODP Corporation - 520 Woodlake Circle, Ste A - Responsibilities: Perform distribution-related functions including checking, picking, packing, shipping, receiving; Operate a pallet jack to move product; Maintain safety and housekeeping; Contribute ideas for continuous improvements to the distribu

Kingwood Avenue - Responsibilities: Loading and unloading shipments; Selecting and palletizing items; Auditing and repacking; Sorting and housekeeping; Other duties as assigned by site leadership.

Cintas Corporation - - Responsibilities: Drive company trucks to designated areas in the facility for unloading of soiled products.Load clean uniforms, floor mats and additional customer products onto trucks based on customer routes.Maintain the cleanliness of the work area.Meet or exceed a standar

Warehouse Delivery Driver Associate.It's an important hands-on role where you'll be key to giving Locke Supply's internal and external customers an outstanding experience.You will be responsible for the day-to-day warehouse operations, including material handling which includes stocking product, pic

Cintas Corporation - - Responsibilities: Load and unload customer garments and bulk products into industrial washers and dryers; Set appropriate wash and dry parameters based on product type; Coordinate transfers between washers and dryers and monitor equipment; Maintain cleanliness of work area an

Fusion Medical Staffing-Cath Lab is seeking a travel Electrophysiology Technician for a travel job in Rockingham, Virginia.Job Description & Requirements.Facility in Harrisonburg, Virginia.Fusion Medical Staffing is seeking a skilled Electrophysiology Lab Tech for a 13-week travel assignment in Harr

Anders Group is seeking a travel Medical Lab Technician for a travel job in Portsmouth, Virginia.Job Description & Requirements.Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined.Posted job title: Interim Director of L

We are currently seeking a friendly full-time lab technician to join our busy OB/GYN practice.We are a well-established practice with 3 locations in the Hampton Roads area with 8 physicians, 2 physician assistants, 4 certified midwives, a nurse practitioner, and a full-time marriage and family thera

Parts Authority is one of the fastest growing supply chain companies in the country.We offer promotable career advancement and job stability- 50 years old and growing!.We are rapidly expanding and looking for candidates to join our family! If you enjoy full-time employment, great pay and benefits, a

Amazon is seeking Warehouse Shopper Team Members / Order Fulfillment Associates to work in Amazon fulfillment centers selecting, packing, and preparing customer orders for delivery.Employees are responsible for locating items in the warehouse, picking items using handheld scanners, packing items int

Fulfillment Center Associate I.Looking for a rewarding career to make an impact and gain valuable warehousing experience? Join Safelite's growing fulfillment center team and ensure customers' safety on the road by delivering parts to our experienced technician team.Every item you handle or inspect c

RNs throughout the prep and recovery of our Cardiac Catheterization, Electrophysiology, and Cardiac OR patients.In our department we prep and recover 40 - 60 patients a day.In the recovery area, the cardiac techs are trained to settle patients in the room postoperatively (hooking to the monitor, cle

The Warehouse Associate position exists to ensure effective movement and management of inventory between the dock, sales floor, product repair, customer pickup and delivery.This role ensures the proper evaluation and shipping of merchandise and managing inventory flow.The Warehouse Associate is also

Responsible for implementing and maintaining the effectiveness of the quality system.Implement and maintain the effectiveness of the quality system.Operation of forklifts, packaging and labeling of customer orders, and utilization of computer systems to process receipts, putaways, picks, and repleni

Performs a variety of retail operations functions to ensure sales readiness and customer support at Southern States Cooperative, Inc.SSC) service and cooperative locations.Job functions vary by location and generally include: receiving merchandise and maintaining warehouse inventory, stocking shelve

Amazon warehouse associates hiring in your area.If you are looking for outstanding pay, flexible part-time, full-time and seasonal schedules, plus benefits for you and your family, the Amazon Logistics Team has you covered! Qualifications, High School or equivalent diploma,Experience with Windows Op

The Associate Director of Research and Financial Administration provides unified leadership for HRBRC business, including institutional fiscal, contractual, and sponsored-program activities that flow through HRBRC and its participating organizations.Acting as the HRBRC’s designated l

What is the Warehouse Delivery Driver Associate responsibilities?.It's an important hands-on role where you'll be key to giving Locke Supply's internal and external customers an outstanding experience.You will be responsible for the day-to-day warehouse operations, including material handling which

Warehouse Associate Distribution Center (Shift 2).Grow your warehouse career with Dollar Tree!.Dollar Tree is hiring motivated Warehouse Associates to join our fast-paced distribution center.You'll play a key role in supporting store operations while working for a stable, growing Fortune 143 compan

Ability to obtain and maintain a Secret Clearance.Serves as the day-to-day lead for logistics operations—assigning, executing, and monitoring work tasks.Ensures accuracy and compliance in material handling, storage, and distribution processes.Coordinates logistics support activities across multipl

Warehouse Associate - CHEASPEAKE, VIRGINIA - Distribution Center (Shift 1).Grow your warehouse career with Dollar Tree!.Dollar Tree is hiring motivated Warehouse Associates to join our fast-paced distribution center.You'll play a key role in supporting store operations while working for a stable, gr

Knowledge of anatomy, physiology, chemistry, mathematics, hematology, and serology.

The Warehouse Associate is responsible for daily customer order fulfillment activities within an assigned area(s) of a distribution facility.This position is responsible for demonstrating safety and operational expertise within a quality and productivity driven environment.This position will be requ