Trabajos cleaning supervisor en Elgin, IllinoisCrear alertas

Responsibilities The primary responsibility of this position is to read meters and record consumption of the water used, cleaning of meter boxes, and removal of vegetation impeding access to meters Position reports to the Customer Service Supervisor Perform manual work taking readings of meter dials and entering the read into a hand-held unit or laptop computer Perform general maintenance of meter boxes which may include cleaning sand and debris from box and removal of some vegetation to gain access to the meter box Walks or drives a vehicle along established routes to take readings of meter dials Report to billing department any problems such as damaged boxes or lids, obstructions to meter access, water in meter box, water leaks, and spinning dials on register Report to billing department any problems with dogs, bees, snakes or other wildlife which prevents access to meters Complete re-read service orders to verify readings In cases where consumption appears to be abnormal, and record possible reasons for the fluctuations Record and report any illegal usage to the billing department Follow all safety procedures, rules and regulations Utilize all safety equipment Performs work related to this job description as required to include special projects and provide assistance to our Division as needed Work is performed primarily outdoors Involves frequent interaction with people

Job Description Want to be part of something special? We're Filling Important Jobs! Join an industry leader and innovator looking for people who want to make a difference. Hoffer Plastics is hiring for "Set Up/Mold Technicians", "2nd shift". The Mold Setup Technician is responsible for molding parts in accordance with internal and external customer requirements. This includes machine set up, auxiliary equipment set up and process parameter input. Additional responsibilities include maintaining a neat and orderly work area in accordance with 5S standards and adhering to safety policies. The Mold Setup Technician position is divided into four (4) classifications based on skill set and responsibility and pay rate will be determined accordingly. Starting Pay $18.25 - $23.50 (based on experience) + 4% Shift Premium 2ND Shift Hours are 4:00pm-12:00am Hoffer provides full training, extensive benefits, pay premiums for night shifts, and unlimited career potential. ** Responsibilities: The following responsibilities will vary based on skill level and experience. Level C • Complete B level training curriculum during level C., • Perform mold set up, and color changes to meet production demands., • Set molding process parameters with the assistance of a foreman, supervisor, A or B level molding technician., • Monitor production for accuracy and efficiency and work with quality inspectors to identify defects., • Complete A level training curriculum during level B., • Set molding process parameters to ensure part quality., • Troubleshoot process, machine, and auxiliary equipment problems and make necessary changes to ensure quality and reduce downtime., • Learn new technology as it is brought to manufacturing., • Work with quality inspectors to identify defects and make good decisions relative to process changes., • Ability to sample new and existing molds., • Keeps current with new technology in molding, auxiliary equipment, robots, etc., • Promote safety by abiding by all related policies and procedures and set a good example for others., • Help maintain 5S and cleanliness in the Plant by doing assigned cleaning tasks and set a good example for others., • Assume responsibilities of supervisor or foremen in their absence., • This job description does not contain every function/responsibility that may be required in the performance of this job. All team members are required to perform other related duties/functions as assigned., • All team members shall:, • Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management., • Continue to grow job specific knowledge and use tools to identify and assist with continuous improvement., • Comply with safety regulations and maintain clean and orderly work areas PHYSICAL REQUIREMENTS: The incumbent will: • usually stand/ walk most of the shift., • frequently bend at waist, twist, kneel / crouch, climb ladders and climb up on machinery with proper fall protection, • occasionally push, pull and lift up to 75lbs. or more., • occasionally lift above waist and or shoulder up to 75lbs and over., • sometimes perform hand/ wrist/ finger movements and foot movements for pedal controls on forklift., • occasionally perform keyboarding and squeezing movements., • Minimum education of High School diploma or G.E.D. certificate, • Must be able and interested in successfully progressing through leveled Molding Technician training curriculum., • Strong mechanical aptitude and math proficiency, • Proficient in reading / writing English, • Blue Cross Blue Shield Medical, Dental and VSP Vision Insurance, • Hoffer Plastics matches .50 per $1.00 dollar contributed each payroll period up to 6% plus a Safe Harbor contribution of an amount equal to 3% of employee's annual eligible earnings, • Paid Life Insurance in the amount of 1.5 times basic annual salary, • Short term and Long-term Disability, • 2 Weeks Paid Vacation and up to 5 Days of Illinois Paid Leave., • 9 Paid Holidays Hoffer Plastics Corporation: There's a part of us in Every Piece. Hoffer Plastics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description The Sanitation Supervisor provides leadership to the Sanitation Leads and crews in all areas of sanitation. He/she ensures compliance to Fresh Express food safety and sanitation standards. Duties and Responsibilities: • Provides leadership to third shift sanitation crews in all areas., • Performs comprehensive evaluation of sanitation process and practices., • Evaluates and modifies SSOP's as required, • Evaluates and modifies Master Sanitation Schedule as required., • Updates FSSC documentation as required (in accordance to FSSC procedures), • Trains Sanitation Leads and Sanitation Crew on documented processes and procedures., • Perform swabs as needed, • Coordinates the activities of contracted sanitation personnel to ensure compliance to Fresh Express Sanitation standards., • Reviews and Perform Sanitation/QA assessments and audits (pre-op inspection and swabs) of sanitation operations., • Manages Sanitation supplies and chemical inventories., • Leads team trainings and process improvement., • Provides Maintenance Manager with equipment damage report (if any)., • Assists/coordinates in the training of proper/safe handling and usage of sanitation chemicals., • Attends pre-operational meeting with summary information of departmental issues or concerns., • Assists in Food Safety/HACCP/GMP and customer audits., • Be on the floor observing and correcting sanitation, food safety and GMP violation standing and walking in sanitation cleaning area (including but not limited to raw, processing, pack out area) on 3rd shift., • Send put data, report KPI as needed., • Perform internal audits as needed and follow up on all CA's internally or from 3rd party audit., • Strong written and oral communication skills., • Strong interpersonal skills and succeed in a team environment., • Problem solving abilities., • Basic mechanical skills., • Detail oriented., • Bilingual English/Spanish., • Experience with FSSC 22000 or equivalent system., • Previous experience in food manufacturing sanitation. The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed, as an exhaustive list of responsibilities, duties and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer. Job Posted by ApplicantPro

Job Description Want to be part of something special? We're Filling Important Jobs! Join an industry leader and innovator looking for people who want to make a difference. Hoffer Plastics is hiring for "Set Up/Mold Technicians", "3rd shift". The Mold Setup Technician is responsible for molding parts in accordance with internal and external customer requirements. This includes machine set up, auxiliary equipment set up and process parameter input. Additional responsibilities include maintaining a neat and orderly work area in accordance with 5S standards and adhering to safety policies. The Mold Setup Technician position is divided into four (4) classifications based on skill set and responsibility and pay rate will be determined accordingly. Starting Pay $18.25 - $23.50 (based on experience) + 8% Shift Premium $1,000 Sign on BONUS 3rd Shift Hours are 12:00am-8:00am Hoffer provides full training, extensive benefits, pay premiums for night shifts, and unlimited career potential. ** Responsibilities: The following responsibilities will vary based on skill level and experience. Level C • Complete B level training curriculum during level C., • Perform mold set up, and color changes to meet production demands., • Set molding process parameters with the assistance of a foreman, supervisor, A or B level molding technician., • Monitor production for accuracy and efficiency and work with quality inspectors to identify defects., • Complete A level training curriculum during level B., • Set molding process parameters to ensure part quality., • Troubleshoot process, machine, and auxiliary equipment problems and make necessary changes to ensure quality and reduce downtime., • Learn new technology as it is brought to manufacturing., • Work with quality inspectors to identify defects and make good decisions relative to process changes., • Ability to sample new and existing molds., • Keeps current with new technology in molding, auxiliary equipment, robots, etc., • Promote safety by abiding by all related policies and procedures and set a good example for others., • Help maintain 5S and cleanliness in the Plant by doing assigned cleaning tasks and set a good example for others., • Assume responsibilities of supervisor or foremen in their absence., • This job description does not contain every function/responsibility that may be required in the performance of this job. All team members are required to perform other related duties/functions as assigned., • All team members shall:, • Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management., • Continue to grow job specific knowledge and use tools to identify and assist with continuous improvement., • Comply with safety regulations and maintain clean and orderly work areas PHYSICAL REQUIREMENTS: The incumbent will: • usually stand/ walk most of the shift., • frequently bend at waist, twist, kneel / crouch, climb ladders and climb up on machinery with proper fall protection, • occasionally push, pull and lift up to 75lbs. or more., • occasionally lift above waist and or shoulder up to 75lbs and over., • sometimes perform hand/ wrist/ finger movements and foot movements for pedal controls on forklift., • occasionally perform keyboarding and squeezing movements., • Minimum education of High School diploma or G.E.D. certificate, • Must be able and interested in successfully progressing through leveled Molding Technician training curriculum., • Strong mechanical aptitude and math proficiency, • Proficient in reading / writing English, • Blue Cross Blue Shield Medical, Dental and VSP Vision Insurance, • Hoffer Plastics matches .50 per $1.00 dollar contributed each payroll period up to 6% plus a Safe Harbor contribution of an amount equal to 3% of employee's annual eligible earnings, • Paid Life Insurance in the amount of 1.5 times basic annual salary, • Short term and Long-term Disability, • 2 Weeks Paid Vacation and up to 5 Days of Illinois Paid Leave., • 9 Paid Holidays Hoffer Plastics Corporation: There's a part of us in Every Piece. Hoffer Plastics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Want to be part of something special? We're Filling Important Jobs! Join an industry leader and innovator looking for people who want to make a difference. Hoffer Plastics is hiring for "Set Up/Mold Technicians", "1st shift". The Mold Setup Technician is responsible for molding parts in accordance with internal and external customer requirements. This includes machine set up, auxiliary equipment set up and process parameter input. Additional responsibilities include maintaining a neat and orderly work area in accordance with 5S standards and adhering to safety policies. The Mold Setup Technician position is divided into four (4) classifications based on skill set and responsibility and pay rate will be determined accordingly. Starting Pay $18.25 - $23.50 (based on experience) 1st Shift Hours are 08:00am-4:00pm Hoffer provides full training, extensive benefits, pay premiums for night shifts, and unlimited career potential. ** Responsibilities: The following responsibilities will vary based on skill level and experience. Level C • Complete B level training curriculum during level C., • Perform mold set up, and color changes to meet production demands., • Set molding process parameters with the assistance of a foreman, supervisor, A or B level molding technician., • Monitor production for accuracy and efficiency and work with quality inspectors to identify defects., • Complete A level training curriculum during level B., • Set molding process parameters to ensure part quality., • Troubleshoot process, machine, and auxiliary equipment problems and make necessary changes to ensure quality and reduce downtime., • Learn new technology as it is brought to manufacturing., • Work with quality inspectors to identify defects and make good decisions relative to process changes., • Ability to sample new and existing molds., • Keeps current with new technology in molding, auxiliary equipment, robots, etc., • Promote safety by abiding by all related policies and procedures and set a good example for others., • Help maintain 5S and cleanliness in the Plant by doing assigned cleaning tasks and set a good example for others., • Assume responsibilities of supervisor or foremen in their absence., • This job description does not contain every function/responsibility that may be required in the performance of this job. All team members are required to perform other related duties/functions as assigned., • All team members shall:, • Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management., • Continue to grow job specific knowledge and use tools to identify and assist with continuous improvement., • Comply with safety regulations and maintain clean and orderly work areas PHYSCIAL REQUIREMENTS: The incumbent will: • usually stand/ walk most of the shift., • frequently bend at waist, twist, kneel / crouch, climb ladders and climb up on machinery with proper fall protection, • occasionally push, pull and lift up to 75lbs. or more., • occasionally lift above waist and or shoulder up to 75lbs and over., • sometimes perform hand/ wrist/ finger movements and foot movements for pedal controls on forklift., • occasionally perform keyboarding and squeezing movements., • Minimum education of High School diploma or G.E.D. certificate, • Must be able and interested in successfully progressing through leveled Molding Technician training curriculum., • Strong mechanical aptitude and math proficiency, • Proficient in reading / writing English, • Blue Cross Blue Shield Medical, Dental and VSP Vision Insurance, • Hoffer Plastics matches .50 per $1.00 dollar contributed each payroll period up to 6% plus a Safe Harbor contribution of an amount equal to 3% of employee's annual eligible earnings, • Paid Life Insurance in the amount of 1.5 times basic annual salary, • Short term and Long-term Disability, • 2 Weeks Paid Vacation and up to 5 Days of Illinois Paid Leave., • 9 Paid Holidays Hoffer Plastics Corporation: There's a part of us in Every Piece. Hoffer Plastics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Want to be part of something special? We're Filling Important Jobs! Join an industry leader and innovator looking for people who want to make a difference. Hoffer Plastics is hiring for "Inspector Technicians", "2nd shift". The Inspector Technician is responsible for routine duties associated with inspecting the quality of molded plastic parts made from injection molding machines and assembly machines. Duties include part gauging, visual inspection, trimming, sorting, assembly, weighing / counting, and packing parts. Additional responsibilities include maintaining a neat and orderly work area in accordance with 5S standards, adhering to safety polices, making boxes, preparing production tickets and grinder operation. This position must be able to work from verbal and written instructions as well as utilize company production software programs from computer terminals. Starting Pay $17.75 - $22.00 (based on experience) + 4% Shift Premium 2ND Shift Hours are 4:00pm-12:00am Hoffer provides full training, extensive benefits, pay premiums for night shifts, and unlimited career potential. ** Responsibilities: The following responsibilities will vary based on skill level and experience. Level D • Complete C level training curriculum, • Work closely with training designate and others on shift to learn additional skills and advance to the next level, • Make boxes, and move finished product and goods as needed, • Help maintain cleanliness in the Plant by doing assigned cleaning tasks, • May assume operator tasks as assigned, • Promote safety by abiding by all related policies and procedures Level C • Perform visual inspections on assigned presses and completes all required forms and documentation associated with production, • Perform gauging on parts as assigned by the foreman using various measuring tools such as plug gages, and go / no go gages, • Perform start-ups on all presses and is responsible for all blueprints, forms, etc. required, • Computer data entry, • Perform required complex gauging on all presses using various measuring tools such as micrometers, calipers, indicators, plug gages, and fixtures, • Able to fill in for the Level A on the shift when absent Level B • Level C and train others, • Understand and utilize Statistical Process Control (SPC) Level A • Work with molding technicians and foreman to identify root cause of defects and make good decisions relative to process changes Oversees backtracking of production related problems to ensure proper resolution, • Communicate quality issues to the shift foreman and works with him/her to resolve problem when appropriate, • Identify variances in documented procedures and works with supervisor or foreman and Quality Department to correct the issue., • In-depth knowledge of SPC, • Able to work with and train customers Lead Inspector Technician • Assigned as the training designate to train and mentor other Inspector Technicians on the shift to raise performance and efficiency, • Exhibit ability to effectively communicate and work well with others in the Plant to foster a teamwork environment, • In addition to being responsible for start-up approvals and SPC dimensions, works with all other inspector technicians on the shift with technical tasks and ensures accuracy with established policies and procedures., • Take the lead on IQMS issues., • Conduct final audits of packaged product as time allows, • Interact with customers and auditors, • This job description does not contain every function/responsibility that may be required for the performance of this job. All team members are required to perform other related duties/functions as assigned., • All team members shall:, • Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management., • Continue to grow job specific knowledge and use tools to identify and assist with continuous improvement., • Comply with safety regulations and maintain clean and orderly work areas PHYSICAL REQUIREMENTS: The incumbent will: • usually stand/walk most of their work day, • occasionally sit, stoop, kneel and crouch, • frequently lift, push, pull up to 30-50 pounds, • regular use of specific vision abilities to include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Minimum education of High school diploma or G.E.D. certificate preferred., • Competent in inspection procedures and the use of measuring equipment applicable to the classification level., • Must be able to successfully complete the "C" level Inspector Technician training program., • Good communication skills, including proficiency in reading / writing / speak English., • Computer proficient., • Blue Cross Blue Shield Medical, Dental and VSP Vision Insurance, • Hoffer Plastics matches .50 per $1.00 dollar contributed each payroll period up to 6% plus a Safe Harbor contribution of an amount equal to 3% of employee's annual eligible earnings, • Paid Life Insurance in the amount of 1.5 times basic annual salary, • Short term and Long-term Disability, • 2 Weeks Paid Vacation and up to 5 Days of Illinois Paid Leave., • 9 Paid Holidays Hoffer Plastics Corporation: There's a part of us in Every Piece. Hoffer Plastics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Want to be part of something special? We're Filling Important Jobs! Join an industry leader and innovator looking for people who want to make a difference. Hoffer Plastics is hiring for "Inspector Technicians", "1st shift". The Inspector Technician is responsible for routine duties associated with inspecting the quality of molded plastic parts made from injection molding machines and assembly machines. Duties include part gauging, visual inspection, trimming, sorting, assembly, weighing / counting, and packing parts. Additional responsibilities include maintaining a neat and orderly work area in accordance with 5S standards, adhering to safety polices, making boxes, preparing production tickets and grinder operation. This position must be able to work from verbal and written instructions as well as utilize company production software programs from computer terminals. Starting Pay $17.75 - $22.00 (based on experience) 1st Shift Hours are 8:00am-4:00pm Hoffer provides full training, extensive benefits, pay premiums for night shifts, and unlimited career potential. ** Responsibilities: The following responsibilities will vary based on skill level and experience. Level D • Complete C level training curriculum, • Work closely with training designate and others on shift to learn additional skills and advance to the next level, • Make boxes, and move finished product and goods as needed, • Help maintain cleanliness in the Plant by doing assigned cleaning tasks, • May assume operator tasks as assigned, • Promote safety by abiding by all related policies and procedures Level C • Perform visual inspections on assigned presses and completes all required forms and documentation associated with production, • Perform gauging on parts as assigned by the foreman using various measuring tools such as plug gages, and go / no go gages, • Perform start-ups on all presses and is responsible for all blueprints, forms, etc. required, • Computer data entry, • Perform required complex gauging on all presses using various measuring tools such as micrometers, calipers, indicators, plug gages, and fixtures, • Able to fill in for the Level A on the shift when absent Level B • Level C and train others, • Understand and utilize Statistical Process Control (SPC) Level A • Work with molding technicians and foreman to identify root cause of defects and make good decisions relative to process changes Oversees backtracking of production related problems to ensure proper resolution, • Communicate quality issues to the shift foreman and works with him/her to resolve problem when appropriate, • Identify variances in documented procedures and works with supervisor or foreman and Quality Department to correct the issue., • In-depth knowledge of SPC, • Able to work with and train customers Lead Inspector Technician • Assigned as the training designate to train and mentor other Inspector Technicians on the shift to raise performance and efficiency, • Exhibit ability to effectively communicate and work well with others in the Plant to foster a teamwork environment, • In addition to being responsible for start-up approvals and SPC dimensions, works with all other inspector technicians on the shift with technical tasks and ensures accuracy with established policies and procedures., • Take the lead on IQMS issues., • Conduct final audits of packaged product as time allows, • Interact with customers and auditors, • This job description does not contain every function/responsibility that may be required for the performance of this job. All team members are required to perform other related duties/functions as assigned., • All team members shall:, • Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management., • Continue to grow job specific knowledge and use tools to identify and assist with continuous improvement., • Comply with safety regulations and maintain clean and orderly work areas PHYSICAL REQUIREMENTS: The incumbent will: • usually stand/walk most of their work day, • occasionally sit, stoop, kneel and crouch, • frequently lift, push, pull up to 30-50 pounds, • regular use of specific vision abilities to include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Minimum education of High school diploma or G.E.D. certificate preferred., • Competent in inspection procedures and the use of measuring equipment applicable to the classification level., • Must be able to successfully complete the "C" level Inspector Technician training program., • Good communication skills, including proficiency in reading / writing / speak English., • Computer proficient., • Medical (PPO Blue Cross Blue Shield), • Vision (VSP), • Dental (PPO Blue Cross Blue Shield), • 401K, Hoffer Plastics matches .50 per $1.00 dollar contributed each payroll period up to 6%., • Paid Life Insurance, • Short term and Long-term Disability, • 2 Weeks Paid Vacation, up to 5 Days of Paid Leave., • 9 Paid Holidays Hoffer Plastics Corporation: There's a part of us in Every Piece. Hoffer Plastics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionSalary: $16.00 per hour Department: Recreation/Facilities Part-Time: Hourly Non-exempt Do you take pride in maintaining clean, safe spaces and enjoy hands-on work? Join the Dundee Township Park District as a Custodian and play an essential role in ensuring our facilities are welcoming, well-maintained, and ready for community use. This part-time position offers a variety of tasks and the opportunity to make a visible impact every day. Why Join Us? As a Custodian at Dundee Township Park District, youll be part of a dedicated team that supports our community by keeping our recreation spaces clean, functional, and safe. From room setup to snow removal to daily cleaning routines, youll help ensure a positive experience for all guests, program participants, and staff. What Youll Do: • Perform daily cleaning duties including sweeping, mopping, dusting, vacuuming, and disinfecting restrooms, • Operate cleaning equipment such as buffers, scrubbers, and carpet cleaners, • Move furniture and equipment; assist with event setups and breakdowns, • Handle minor maintenance tasks (e.g., replacing lightbulbs, minor plumbing/electrical work), • Maintain vending machines and manage trash disposal, • Respond to weather needs including snow shoveling and salting walkways, • Lock/unlock facilities, arm/disarm alarms, and ensure building security, • Support part-time staff and assist with training when needed, • Report larger maintenance concerns to supervisor and uphold safety standards What You Bring: • Must be at least 18 years old with a high school diploma or equivalent, • Experience with facility cleaning and maintenance preferred, • Ability to operate commercial cleaning equipment safely and effectively, • Strong attention to detail and awareness of safety procedures, • Leadership skills and ability to guide or oversee part-time staff when needed, • First Aid/CPR certification recommended (or willingness to obtain), • Flexibility to work evenings and weekends as scheduled Perks & Benefits: • Opportunity to work independently and take ownership of your space, • Varied tasks that keep each shift engaging, • Contribute to a clean, safe environment that serves the community, • Supportive team environment focused on professionalism and quality In Exchange for Your Time and Talent, We Offer: Choose one of the following: • Individual 100-day Fitness Center Pass, • Family Season Pass to Dolphin Cove Aquatic Center, • Free or discounted Park District programs, merchandise, and concessions, • Credit Union (KCT) membership access Schedule: This is a part-time position with weekend availability required. Weekend differential increases pay to $17.00 per hour Typical hours: • Saturdays & Sundays between 4:30 p.m. 8:30 p.m. or 4:30 p.m. Midnight, • 1-week training required during weekdays (7:00 p.m. 11:00 p.m.) prior to regular shifts. Join Our Team! If you're dependable, detail-oriented, and take pride in your work, wed love to have you on board. Apply today to become a Custodian with Dundee Township Park District and help maintain the facilities our community depends on!

Job Description Want to be part of something special? We're Filling Important Jobs! Join an industry leader and innovator looking for people who want to make a difference. Hoffer Plastics is hiring for "Inspector Technicians", "3rd shift". The Inspector Technician is responsible for routine duties associated with inspecting the quality of molded plastic parts made from injection molding machines and assembly machines. Duties include part gauging, visual inspection, trimming, sorting, assembly, weighing / counting, and packing parts. Additional responsibilities include maintaining a neat and orderly work area in accordance with 5S standards, adhering to safety polices, making boxes, preparing production tickets and grinder operation. This position must be able to work from verbal and written instructions as well as utilize company production software programs from computer terminals. Starting Pay $17.75 - $22.00 (based on experience) + 8% Shift Premium $1,000 Sign on BONUS 3rd Shift Hours are 12:00am-8:00am Hoffer provides full training, extensive benefits, pay premiums for night shifts, and unlimited career potential. ** Responsibilities: The following responsibilities will vary based on skill level and experience. Level D • Complete C level training curriculum, • Work closely with training designate and others on shift to learn additional skills and advance to the next level, • Make boxes, and move finished product and goods as needed, • Help maintain cleanliness in the Plant by doing assigned cleaning tasks, • May assume operator tasks as assigned, • Promote safety by abiding by all related policies and procedures Level C • Perform visual inspections on assigned presses and completes all required forms and documentation associated with production, • Perform gauging on parts as assigned by the foreman using various measuring tools such as plug gages, and go / no go gages, • Perform start-ups on all presses and is responsible for all blueprints, forms, etc. required, • Computer data entry, • Perform required complex gauging on all presses using various measuring tools such as micrometers, calipers, indicators, plug gages, and fixtures, • Able to fill in for the Level A on the shift when absent Level B • Level C and train others, • Understand and utilize Statistical Process Control (SPC) Level A • Work with molding technicians and foreman to identify root cause of defects and make good decisions relative to process changes Oversees backtracking of production related problems to ensure proper resolution, • Communicate quality issues to the shift foreman and works with him/her to resolve problem when appropriate, • Identify variances in documented procedures and works with supervisor or foreman and Quality Department to correct the issue., • In-depth knowledge of SPC, • Able to work with and train customers Lead Inspector Technician • Assigned as the training designate to train and mentor other Inspector Technicians on the shift to raise performance and efficiency, • Exhibit ability to effectively communicate and work well with others in the Plant to foster a teamwork environment, • In addition to being responsible for start-up approvals and SPC dimensions, works with all other inspector technicians on the shift with technical tasks and ensures accuracy with established policies and procedures., • Take the lead on IQMS issues., • Conduct final audits of packaged product as time allows, • Interact with customers and auditors, • This job description does not contain every function/responsibility that may be required for the performance of this job. All team members are required to perform other related duties/functions as assigned., • All team members shall:, • Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management., • Continue to grow job specific knowledge and use tools to identify and assist with continuous improvement., • Comply with safety regulations and maintain clean and orderly work areas PHYSICAL REQUIREMENTS: The incumbent will: • usually stand/walk most of their work day, • occasionally sit, stoop, kneel and crouch, • frequently lift, push, pull up to 30-50 pounds, • regular use of specific vision abilities to include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Minimum education of High school diploma or G.E.D. certificate preferred., • Competent in inspection procedures and the use of measuring equipment applicable to the classification level., • Must be able to successfully complete the "C" level Inspector Technician training program., • Good communication skills, including proficiency in reading / writing / speak English., • Computer proficient., • Blue Cross Blue Shield Medical, Dental and VSP Vision Insurance, • Hoffer Plastics matches .50 per $1.00 dollar contributed each payroll period up to 6% plus a Safe Harbor contribution of an amount equal to 3% of employee's annual eligible earnings, • Paid Life Insurance in the amount of 1.5 times basic annual salary, • Short term and Long-term Disability, • 2 Weeks Paid Vacation and up to 5 Days of Illinois Paid Leave., • 9 Paid Holidays Hoffer Plastics Corporation: There's a part of us in Every Piece. Hoffer Plastics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job Description Title: Janitor I Reports To: Vocational Trainer Main Function: Manual labor associated with the daily cleaning of buildings, under supervision, to perform various duties requiring moderate physical strength (able to lift 20 pounds). Typical duties may include some or all of the following: dust mopping, sweeping, wet mopping, dusting, cleaning restrooms, removing trash, polishing furniture, and simple operation of basic mechanical cleaning equipment. (We welcome anyone and encourage people with disabilities to apply!) Location: Location will depend on assignment. Work hours may vary according to variable job requirements, assignment of project work, and other financial and contractual obligations. Examples of Routine Work: • Monitors public areas and cleans as necessary. May contact supervisor for assistance, • Dust mop, sweep, wet-mop, spray buff and burnish floors, • Some use of power cleaning equipment (vacuum, rotary machines, etc.), • Vacuum, bonnet buff and extract rugs and carpets, • Scrub and clean restrooms and supply with towels, soap, and other items, • Dust and clean walls, doors, windows, woodwork, polish furniture, • Clean elevators and stairwells, • Monitor outside grounds and/or immediate outside of buildings, • Remove trash, • Physical ability and conditioning to perform all duties of the position including lifting to 50 lbs. at times; up to 25 lbs. occasionally; and 10-15 lbs. frequently., • Push and pull a variety of equipment. Operate and physically manipulate various floor work equipment, including but not limited to floor scrubbers, buffers and carpet extractors., • Performing physical activities that require considerable use of arms and legs and moving whole body, such as climbing, lifting, walking, stooping, kneeling, standing, reaching and handling of materials. Physical work is a primary part (over 70% of the job). EEO Statement: Jewish Child and Family Services is an Equal Employment Opportunity (“EEO”) employer. JCFS prohibits illegal discrimination and harassment and affords equal employment opportunities to employees and applicants without regard to race, color, sex, age, religion, disability, national origin, ancestry, sexual orientation, marital status, parental status, source of income, housing status, military service or discharge status, gender identity, genetic information, or any other protected category established by law, statute or ordinance. Accredited by COA, Charter member of CWLA, licensed by DCFS. Please visit us at to apply.

Job DescriptionDescription: Job Summary: This position is responsible for leading all production changeovers, focusing on effective and efficient sanitation of equipment and areas. Maintains and controls the organization of tools, supplies and equipment utilized for changeovers. Responsibilities of the Position: • Communicate safety as the number one priority for employees by encouraging safe work practices and immediately addressing safety concerns, • Observe and implement safety corrections on assigned lines, • Train employees to work in safe manner, • Support multiple line changeovers to ensure proper cleaning is performed, staff are utilized efficiently, and appropriate departments are notified for support in a timely matter., • Train production leads, operators and crew on effective sanitation practices in a timely matter., • Train, manage, clean and troubleshoot sanitation equipment including but not limited to floor scrubber, COP tank, parts washer, dry steam, foamer, vacuums, etc., • Manage 6S and inventory of sanitation tools, line-specific tooling and equipment., • Adheres to CW’s Pathogen Procedures, including but not limited to Allergen Control and Facility Color Coding procedures., • Backfill the responsibilities of the Sanitation Assistant Supervisor during their absence., • Ensures sanitation tools, line tooling and equipment, and more are delivered to lines prior to the changeover., • Ensures equipment is taken apart completely and in an organized manner, followed by guaranteeing proper reassembly of equipment and line., • Monitors, directs, and problem solves to improve effectiveness and efficiency of changeovers. Provides suggestions and ideas to management for continuous improvement efforts., • Effective shift handoff during line changeovers, Master Sanitation Schedule (MSS) and other responsibilities., • Enforce company policies and procedures regarding safety, food safety, cooperation and teamwork., • Fast-response for safety concerns, including but not limited to blood-borne pathogen containment or food-borne pathogens., • Knowledge of basic sanitation principals, allergen program, and preventing foodborne illness, • Basic understanding of Microsoft Outlook, Word and Excel, • High school diploma, GED or equivalent experience required, • Experience in a manufacturing facility that produces food or nutrition products highly preferred, • Wet, dry and dusty work environments during sanitation and production periods, • Heavy industrial equipment requiring 2-person lift, • This position requires the employee to be on-call at all times to respond to any emergency., • Operate standard office equipment, • Reach with hands and arms, • Able to lift up to 49 pounds, stand/walk for up to 8 hours a day and be able to frequently push, pull, squat, bend, and reach, all with or without reasonable accommodation, • Ability to work between an office setting and warehouse environment with temperature range of 55 – 80 degrees., • Climb ladders, operate scissor lifts (after certification) and comfortable working with heights.

Job Description Looking for CNC Operators for 2nd SUMMARY: Fabricates precision parts from metal, plastic fiber, aluminum, etc., using CNC machine tools such as lathes, milling machine etc. Uses precision measuring instruments and various hand tools. ESSENTIAL DUTIES AND RESPONSIBILITIES:  Reads job specifications to determine machine adjustments and material requirements.  Sets stops or guides to specified length as indicated by scale, rule, or template.  Positions work piece against stops or aligns layout marks with die or blade.  Pushes button or depresses pedal to activate machine.  Observes machine operation to detect work piece defects or machine malfunction.  Measures work piece dimensions to determine accuracy of machine operation.  Removes burrs, sharp edges, rust, or scale from work piece.  Performs minor machine maintenance such as oiling machines, dies, or work pieces.  Assists machinists to set up machine, and stack, mark, pack, and transport finished work pieces.  Performs preventative maintenance on machine per requirements.  General housekeeping (sweeping, mopping etc) and overall cleaning or any other tasks assigned by supervisor.  Any and all duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience  High school diploma or equivalent Reasoning Ability  Demonstrates the ability to apply common sense and understanding to carry out job functions. Computer Skills  Use of computer system to issue material, labor and record quality data. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  The employee is occasionally exposed to wet and/or humid conditions (non- weather); working near moving mechanical parts; outdoor weather conditions; dusty conditions from the plastic parts (non-weather); extreme cold (non- weather) and extreme heat (non-weather).  The noise level in the work environment is usually moderate to loud. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by the employee to successfully perform the essential functions of this job:  Person must be able to sit comfortably; possess excellent fine motor skills in areas such as small parts production and assembly; entering of computer data; and working with paperwork.  Person is required to frequently reach with hands and arms; walk; climb; stoop; kneel; and push and pull large objects.  Person must exhibit excellent gross motor dexterity and coordination as they might regularly lift and/or move up to 50lbs; and at times be able to use force to push/pull over 75 pounds with assistance of casters, and lift equipment provided.  Person must be able to speak clearly to be heard; as well as hear work related instructions from co-workers, door bells, lift truck noises and other equipment moving around them.  Person must be able to adequately perform tasks requiring close vision, distance vision, peripheral vision and depth perception.

Job DescriptionBenefits: • Competitive salary, • Leadership roles, • Flexible hours, • Great pay, • Valuable work experience, • Increased social opportunities, • Future references/referralsRequirements:, • Ability to work with children, • Excellent interpersonal communication and organizational skills, • Provides swim instruction based on the Goldfish Swim School curriculum., • Enforces safety rules and regulations to prevent accidents. Makes rescues and administers first aid when necessary., • Evaluates students progress, and completes required paperwork in a timely manner., • Interacts with parents/guardians on the activities and development of students swim skills., • Acts as a GSS ambassador to ensure parental satisfaction., • Uses problem solving and creative thinking skills to identify and resolve challenges that students encounter., • Inspects pool areas before and after each class for possible maintenance, cleanliness or damage issues. Reports issues to management as appropriate., • Maintains and ensures proper storage of all pool equipment. Places and removes lane lines., • Reports accidents and incidents to management. Completes required documentation and paperwork., • Performs Deck Teacher duties as needed., • Performs light cleaning duties such as window washing, deck mopping, trash removal etc. on occasion., • Attend required/mandatory workshops and in-service training outside of regular working hours.