Trabajos Construction & Trades en Jacksonville, FloridaCrear alertas

• Department: Freestanding ED, • Schedule: Full-time Days, • Hospital: Ascension Freestanding ED Beaches Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Perform computerized tomographic procedures for the diagnosis of disease and injury according to protocols established by radiologists. • Prepare and position patients and selects anatomic and technical parameters accurately., • Prepare and administes contrast media and/or medications within the accepted scope of practice and applicable state and federal regulations., • Observe patient during procedure and reports abnormal activity., • Monitor protocols and recommend updates or refinements as warranted., • Follow radiation safety procedures and guidelines Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • Radiologic Technologist credentialed from the Florida Radiologic Technology obtained prior to hire date or job transfer date required., • One or more of the following required:, • Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Nuclear Medicine or Radiation Therapy specialty also accepted., • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Department: Diagnostic Radiology, • Schedule: Full-time nights, 9:00pm to 7:00am, • 7 days on, 7 days off (Wednesday through Tuesday), • Hospital: Ascension St. Vincent's Riverside Hospital, • Location: Jacksonville, FL Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Take radiologic films providing quality images to physicians to aid in the diagnosis of medical problems. • Prepare and position patients for imaging and select exposure factors accurately., • Prepare and administer contrast media and medications within the accepted scope of practice and applicable state and federal regulations., • Observe patient during procedure and report abnormal activity., • Monitor protocols and recommend updates or refinements as warranted., • Follow radiation safety procedures and guidelines., • Prevent patient from being exposed to unnecessary radiation., • Ensure prompt submission of high-quality of all images and documents sent to PACS (image quality, correct lead markers and patient data/history)., • Ensure equipment is properly functioning., • Report potential problems or equipment malfunction to appropriate personnel., • Lock/tag out equipment if appropriate., • Assist in maintaining a clean, and orderly department to include procedure rooms, storage areas, dressing rooms, film storage area and any other areas in department., • Position patients and select anatomic and technical parameters accurately. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date required., • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Department: Freestanding ED, • Schedule: Full-time Days, • Hospital: Ascension Freestanding ED Beaches Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Perform computerized tomographic procedures for the diagnosis of disease and injury according to protocols established by radiologists. • Prepare and position patients and selects anatomic and technical parameters accurately., • Prepare and administes contrast media and/or medications within the accepted scope of practice and applicable state and federal regulations., • Observe patient during procedure and reports abnormal activity., • Monitor protocols and recommend updates or refinements as warranted., • Follow radiation safety procedures and guidelines Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • Radiologic Technologist credentialed from the Florida Radiologic Technology obtained prior to hire date or job transfer date required., • One or more of the following required:, • Radiologic Technologist specializing in Radiography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date. Nuclear Medicine or Radiation Therapy specialty also accepted., • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Department: Cardiac Nuc Med Amb, • Schedule: Full Time, • Hospital: Ascension St. Vincent's Riverside Hospital, • Location: Jacksonville, FL Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Assist with procedures to analyze, diagnose and treat the cardiovascular system. • Prepare patients for procedures., • Review medical history, position patients and clean/shave/numb testing sites as appropriate., • Interpret, describe and report test results; recognize recording errors and artifacts and react appropriately., • Monitor patient prior to, during and after procedures and promptly reports any abnormal findings in patient's condition., • Prepare and maintain equipment, supplies and lab area., • Ensure equipment is properly functioning., • Report potential problems or equipment malfunction to appropriate personnel., • Lock/tag out equipment if appropriate., • Assist in maintaining a clean, and orderly department. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • One or more of the following required:, • Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date., • Cardiographic Tech credentialed from the Cardiovascular Credentialing International (CCI) obtained within 3 Months (90 days) of hire date or job transfer date. Any specialty is applicable., • Radiologic Technologist credentialed from the Florida Radiologic Technology obtained prior to hire date or job transfer date., • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Department: Magnetic Resonance Imaging, • Schedule: Full Time, • Hospital: Ascension St. Vincent's Southside Hospital, • Location: Jacksonville, FL Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Lead the daily operations of assigned department's imaging services. • Ensure quality in imaging, patient care and work flow., • Monitor patient documentation for timely completion and accuracy., • Oversee quality control testing, equipment maintenance and trouble shooting., • Serve as a resource to department staff as well as other members of the team as needed., • Perform staff orientation, training, and coaching., • Provide input to staff performance evaluations., • Position patients and selects anatomic and technical parameters accurately., • Ensure all activities comply with regulatory agency standards., • Ensure prompt submission of high-quality of all images and documents sent to PACS (image quality, correct lead markers and patient data/history)., • Assist in maintaining a clean, safe, and orderly department to include procedure rooms, storage areas, dressing rooms, film storage area and any other areas in department. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • One or more of the following required:, • Cardiographic Tech credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date., • Radiologic Technologist specializing in Magnetic Resonance Imaging credentialed from the American Registry of Magnetic Resonance Imaging Technologists (ARMRIT) obtained prior to hire date or job transfer date., • Radiologic Technologist specializing in Magnetic Resonance Imaging credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date., • Medical Sonographer credentialed from the American Registry for Diagnostic Medical Sonography (ARDMS) obtained prior to hire date or job transfer date., • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree with 1 year of experience OR 5 years of applicable cumulative job specific experience required. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Department: Cardiac Nuclear Med Ambulatory, • Schedule: Full Time; 10 hour shifts, M-F, Rotating Day Off, • Hospital: Ascension St. Vincent's Riverside Hospital, • Location: Jacksonville, FL Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Perform diagnostic procedures to assess cardiac structures and hemodynamics in accordance with accepted protocols. • Set up and adjusts all imaging equipment and manually maneuvers transducers to perform exams., • Implement safety standards and perform appropriate quality control procedures., • Perform routine and complex studies and assist in a variety of imaging procedures., • Recognize significant structure, artifacts, pathology and equipment limitations., • Position patients and select anatomic and technical parameters accurately., • Ensure all activities comply with regulatory agency standards., • Ensure prompt submission of high-quality of all images and documents sent to PACS (image quality, correct lead markers and patient data/history)., • Assist in maintaining a clean, safe, and orderly department to include procedure rooms, storage areas, dressing rooms, film storage area and any other areas in department. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • One or more of the following required:, • Cardiographic Tech credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date., • Radiologic Technologist specializing in Sonography credentialed from the American Registry of Radiologic Technologists (ARRT) obtained prior to hire date or job transfer date., • Cardiac Sonographer credentialed from the American Registry for Diagnostic Medical Sonography (ARDMS) obtained prior to hire date or job transfer date., • Medical Sonographer credentialed from the American Registry for Diagnostic Medical Sonography (ARDMS) obtained prior to hire date or job transfer date. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Sign-on Bonus: $10,000, • Department: Cardiac Cath Lab, • Schedule: Full time; day shift - 7am-7pm, • Hospital: Ascension St. Vincent's Riverside Hospital, • Location: Jacksonville, FL Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Assist with procedures to analyze, diagnose and treat the cardiovascular system. • Prepare patients for procedures., • Review medical history, position patients and clean/shave/numb testing sites as appropriate., • Interpret, describe and report test results; recognize recording errors and artifacts and react appropriately., • Monitor patient prior to, during and after procedures and promptly reports any abnormal findings in patient's condition., • Prepare and maintain equipment, supplies and lab area., • Ensure equipment is properly functioning., • Report potential problems or equipment malfunction to appropriate personnel., • Lock/tag out equipment if appropriate., • Assist in maintaining a clean, and orderly department. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • One or more of the following required:, • Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date., • Cardiographic Tech credentialed from the Cardiovascular Credentialing International (CCI) obtained within 3 Months (90 days) of hire date or job transfer date. Any specialty is applicable., • Radiologic Technologist credentialed from the Florida Radiologic Technology obtained prior to hire date or job transfer date., • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Department: Breast Health Services, • Schedule: Full Time Days, • Hospital: Ascension St. Vincent's Southside Hospital, • Location: Jacksonville, FL Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Provide mammography imaging services. • Operate equipment and perform various mammography related procedures., • Prepare and position patients and select anatomic and technical parameters accurately., • Explain procedures and educate patients about the role of regular mammography in preventive breast health., • Develop and evaluate the film for technical quality such as density contrast, definition, and distortion., • Follow radiation safety procedures and guidelines., • Ensure prompt submission of high-quality of all images and documents sent to PACS (image quality, correct lead markers and patient data/history)., • Ensure equipment is properly functioning., • Report potential problems or equipment malfunction to appropriate personnel., • Assist in maintaining a clean, and orderly department to include procedure rooms, storage areas, dressing rooms, film storage area and any other areas in department. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • Radiologic Technologist credentialed from the Florida Department of Health obtained prior to hire date or job transfer date required. Florida license requirements not applicable to associates working in Georgia., • One or more of the following required: No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

• Department: EP Lab, • Schedule: Full Time; Days 4 10 hour shifts, • Hospital: Ascension St. Vincent's Riverside Hospital, • Location: Jacksonville, FL Paid time off (PTO) Various health insurance options & wellness plans Retirement benefits including employer match plans Long-term & short-term disability Employee assistance programs (EAP) Parental leave & adoption assistance Tuition reimbursement Ways to give back to your community Benefit options and eligibility vary by position. Compensation varies based on factors including, but not limited to, experience, skills, education, performance, location and salary range at the time of the offer. Assist with procedures to analyze, diagnose and treat the cardiovascular system. • Prepare patients for procedures., • Review medical history, position patients and clean/shave/numb testing sites as appropriate., • Interpret, describe and report test results; recognize recording errors and artifacts and react appropriately., • Monitor patient prior to, during and after procedures and promptly reports any abnormal findings in patient's condition., • Prepare and maintain equipment, supplies and lab area., • Ensure equipment is properly functioning., • Report potential problems or equipment malfunction to appropriate personnel., • Lock/tag out equipment if appropriate., • Assist in maintaining a clean, and orderly department. Licensure / Certification / Registration: • BLS Provider obtained within 1 Month (30 days) of hire date or job transfer date required. American Heart Association or American Red Cross accepted., • One or more of the following required:, • Registered Cardiovascular Invasive Specialist credentialed from the Cardiovascular Credentialing International (CCI) obtained prior to hire date or job transfer date., • Cardiographic Tech credentialed from the Cardiovascular Credentialing International (CCI) obtained within 3 Months (90 days) of hire date or job transfer date. Any specialty is applicable., • Radiologic Technologist credentialed from the Florida Radiologic Technology obtained prior to hire date or job transfer date., • High School diploma equivalency with 2 years of cumulative experience OR Associate's degree/Technical degree OR 4 years of applicable cumulative job specific experience required. No additional preferences. Ascension St. Vincent's is expanding in the fastest-growing county in Northeast Florida with the addition of a fourth regional hospital, Ascension St. Vincent’s St. Johns County. Serving Northeast Florida and Southeast Georgia, Ascension St. Vincent's has been providing caregivers in every discipline a rewarding career in healthcare since 1873. Ascension is a leading non-profit, faith-based national health system made up of over 134,000 associates and 2,600 sites of care, including more than 140 hospitals and 40 senior living communities in 19 states. Our Mission, Vision and Values encompass everything we do at Ascension. Every associate is empowered to give back, volunteer and make a positive impact in their community. Ascension careers are more than jobs; they are opportunities to enhance your life and the lives of the people around you. Ascension provides Equal Employment Opportunities (EEO) to all associates and applicants for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity or expression, pregnancy, childbirth, and related medical conditions, lactation, breastfeeding, national origin, citizenship, age, disability, genetic information, veteran status, marital status, all as defined by applicable law, and any other legally protected status or characteristic in accordance with applicable federal, state and local laws. For further information, view the ___ poster or ___ poster. As a military friendly organization, Ascension promotes career flexibility and offers many benefits to help support the well-being of our military families, spouses, veterans and reservists. Our associates are empowered to apply their military experience and unique perspective to their civilian career with Ascension. Please note that Ascension will make an offer of employment only to individuals who have applied for a position using our official application. Be on alert for possible fraudulent offers of employment. Ascension will not solicit money or banking information from applicants. This employer participates in the Electronic Employment Verification Program. Please click the E-Verify link below for more information.

Company: Gerber Collision & Glass WELCOME TO GERBER COLLISION & GLASS Our Team Members Drive Us! Gerber Collision & Glass is one of the largest collision repair companies in North America. With $2+ billion in sales, over 800 locations and growing, our 10,000+ team members across the United States and Canada are passionate about delivering our goal to WOW Every Customer and Be the Best! We invite you to join our team. Gerber offers a great place to launch and grow careers. As we continue to grow, we have endless opportunities for you to grow with us. Gerber Collision & Glass recognizes, values and welcomes all applicants with unique talents and abilities from all backgrounds and characteristics. All qualified individuals are encouraged to apply, including individuals with disabilities and Protected Veterans. Job Description: The Estimator’s primary responsibility and accountability is to provide an exceptional and successful customer experience while creating estimates, coordinating repair needs for customers including all communication, informing and updating customers and insurance companies throughout the repair process. The Estimator accurately assesses the damage of vehicles and documents needed repairs and parts replacement on the damage appraisal. The Estimator plays a pivotal role in the success of the customer’s experience by ensuring they are working in alignment with all team members in achieving the repair facility's KPIs. Key Job Responsibilities Role and Requirements * Ensure every customer interaction is documented, updated efficiently and accurately with pertinent details * Provide Customer with accurate and timely information, guiding them through the repair process and ensuring that they receive excellent customer service * Ensure compliance with all insurance client requirements, processes and metrics * Ensure compliance with all WOW Operating Way’s regarding customer drop-offs, repair planning, customer communication, and delivery * Communicate all customer requests and needs to appropriate team members * Provides positive energy when greeting customers in person and on the phone * Understanding of all required Insurance programs and procedures * Participate in daily “production walks” with the Management Team, as required * Support all team members when required * Participate in monthly Health & Safety and staff meeting (if required) * Attend training, information sessions and workshops recommended by Store Manager * Maintain the store's KPI’s by maximizing role performance * Uphold the company's Core Values : Honesty, Integrity & Respect Education and/or Experience Required * Knowledge of Repairs and OE Guidelines * High School Diploma or equivalent * Awareness of where to look for answers * Basic Computer Skills * Compliance for DRP’s Minimum of 1-year experience * Must be willing to complete I-CAR Training * Valid Driver’s License Required Skills/Abilities * Awareness of where to look for answers * Basic Computer Skills * Compliance for DRP’s Minimum of 1-year experience * Must be willing to complete I-CAR Training * Valid Driver’s License Please note, this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. The physical demands of your job must be met to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the job. Benefits That Drive Your Success Gerber offers the comprehensive benefits you expect from an industry leader, including: • Annual Paid Time Off (PTO) plans, • 2 weeks of Paid Parental Leave for Full time Employees who work a minimum of 30 hours per week, • 6 paid holidays annually, • Medical, Prescription Drug, Dental & Vision Insurance effective Day 1, • 401(k) Retirement Plan with company match, • Employer Paid Short-Term Disability & Life Insurance, • Additional Voluntary Life Insurance, • Continuing Education Opportunities, • Free Prescription or Non-Prescription Safety Glasses annually, • Annual Voluntary Uniform Stipend Gerber Collision & Glass is proud to be an equal opportunity employer committed to an inclusive and diverse workplace. All qualified candidates will receive consideration for employment, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, marital status, or any other consideration, prohibited by law or by contract. About Us Gerber Collision & Glass has been WOWing customers with our collision repair services for over 80 years. Please visit ___ to learn more about our company. Compensation Details: $70,000+ annually depending on closed sales each week

Uniti Med is seeking a travel Electrophysiology Technician for a travel job in Orange Park, Florida. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 09/15/2025, • Duration: 13 weeks, • Shift: days, • Referral bonus, • Benefits start day 1, • Employee assistance programs

Job DescriptionCalling Construction Executives - Chief Operating Officer opportunity in Jacksonville, Florida. Progressive company ripe for growth! This Jobot Job is hosted by: Sam Kippen Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $150,000 - $250,000 per year A bit about us: We are a Jacksonville-based construction firm with a strong focus on renovation and improvement projects that transform spaces for businesses and communities. As a smaller, employee-focused company, we pride ourselves on being hands-on, approachable, and deeply invested in the success of both our team members and our clients. Our work ranges from commercial tenant improvements and retail buildouts to adaptive reuse and specialty renovations, giving our employees exposure to a variety of exciting and challenging projects. With an emphasis on collaboration, problem-solving, and craftsmanship, we strive to deliver projects that stand out in both quality and client satisfaction. Why join us? Why Join Us: • People-First Culture – You’re more than just a number here; every employee has a voice and an impact., • Diverse Renovation Projects – From modernizing office spaces to reimagining retail, no two jobs are the same., • Growth Opportunities – Work closely with leadership and grow your career with a company that promotes from within., • Community Connection – Be part of projects that make a visible impact across Jacksonville and beyond., • Competitive Compensation – Offering strong pay, benefits, and the stability of a long-term career home. Job Details Title: Chief Operating Officer (COO) Location: North East Florida Key Responsibilities • Serve as the operational backbone of the company, working hands-on with project teams to ensure execution excellence, • Design and implement scalable systems, processes, and structure to support rapid growth, • Partner closely with ownership and executive leadership to define strategic goals and growth milestones, • Lead, mentor, and build a high-performing operations leadership team from the ground up, • Oversee daily operations across project delivery, field execution, safety, and administrative support, • 15+ years of progressive leadership experience in commercial construction, ideally within entrepreneurial or high-growth environments, • Proven ability to scale operational infrastructure while staying connected to frontline execution, • Strong financial, strategic, and organizational planning skills, • Hands-on leadership style with a passion for developing people and building culture, • Track record of driving growth, operational efficiency, and profitability Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance.Company DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

Fusion Medical Staffing-Cath Lab is seeking a travel Electrophysiology Technician for a travel job in Orange Park, Florida. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel Travel EP Lab Tech\n\n Company: Fusion Medical Staffing \n\n Location: Facility in Orange Park, Florida \n\nJob Details\n\n Fusion Medical Staffing is seeking a skilled Electrophysiology Lab Tech for a 13 week travel assignment in Orange Park, Florida. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. \n\nRequired Qualifications:\n\n\n\t • One year’s recent experience as an EP Lab Tech\n\t, • Current BLS (AHA/ ARC) Certification\n\t, • ARRT, RCES, or RCIS Certification\n\t, • Current ACLS Certification\n\n\nPreferred Qualifications:\n\n\n\t, • Valid Radiologic Technologist license in compliance within state regulations\n\t, • PALS or ENPC Certifications\n\t, • Perform comprehensive nursing assessments for EP lab patients and document findings accurately\n\t, • Educate patients and families on electrophysiology procedures, pre-procedure expectations, and post-procedure care to ensure understanding and informed consent\n\t, • Assist physicians with electrophysiology studies, ablations, and device implantations\n\t, • Administer medications, including conscious sedation, per physician orders\n\t, • Monitor cardiac rhythms, hemodynamics, and patient responses throughout procedures\n\t, • Identify and respond to changes in patient condition, escalating care as needed\n\t, • Maintain sterile technique and assist with equipment preparation, setup, and troubleshooting to support seamless procedural workflow\n\t, • Collaborate with the care team to develop and implement patient-centered treatment plans\n\t, • Provide immediate post-procedure care, monitoring complications and ensuring stable recovery\n\t, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standards\n\t, • Perform other duties as assigned within the scope of practice\n\n\nRequired Essential Skills:\n\n\n\t, • Critical thinking, service excellence and good interpersonal communication skills\n\t, • The ability to read, write, & communicate in the English language is required\n\t, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills\n\t, • Physical Abilities - Remain in a stationary position, move about, move equipment (50-100lbs), pushing, pulling, bending\n\t, • Interpersonal Skills - To work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism\n\t, • Technical/Motor Skills - Ability to grasp, fine manipulation, pushing/pulling and able to move about when assisting with procedures and/or using department equipment.\n\t, • Mental Requirements - Must be able to cope with frequent contact with the general public, customers, and meeting deadlines under pressure. Must be able to work under close supervision occasionally as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail\n\t, • Highly competitive pay for travel professionals\n\t, • Comprehensive medical, dental, and vision insurance with first day coverage\n\t, • Paid Time Off (PTO) after 1560 hours\n\t, • Life and Short-term disability offered\n\t, • 401(k) matching\n\t, • Aggressive Refer-a-friend Bonus Program\n\t, • 24/7 recruiter support\n\t \n\nOther Duties Disclaimer:\n\n To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. \n\n Start your rewarding career as an EP Lab RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! \n\n *Fusion is an EOE/E-Verify Employer Fusion Medical Staffing - Cath Lab Job ID #1781915. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Fusion Medical Staffing-Cath Lab With a mission to improve the lives of everyone we touch, Fusion Medical Staffing connects healthcare travelers to opportunities in the locations they've always dreamed of living. Our recruiters act as your co-pilots to support you in your next step – no matter what, where and when. This traveler-first mentality ensures you're in charge of your own destiny, but with the tools you need to succeed. Regardless if you’re a first-time traveler or an established road warrior, you get to choose the best position that not only fits your unique personality but also your personal and professional needs. As a medical traveler, you’ll get to meld your career with personal life experiences, make informed decisions and the freedom to control your career. Competitive compensation packages and opportunities to learn new skills are among some of the perks being a medical traveler with Fusion Medical Staffing. Not to mention you get to explore new cities, take adventures, meet new people, and create memories that last a lifetime. We are not just a place to find your next opportunity, but where you'll love to work. We've won awards for our ethical business practices, lasting community impact, and commitment to being an incredible place to work. Benefits • Benefits start day 1, • Medical benefits, • Dental benefits, • Vision benefits, • Referral bonus, • Mileage reimbursement, • License and certification reimbursement, • Weekly pay, • Cancelation protection, • Guaranteed Hours, • Employee assistance programs, • Continuing Education

Springboard Healthcare is seeking a travel Electrophysiology Technician for a travel job in Orange Park, Florida. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 09/15/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours

Job Description Hiring Framing Carpenters Immediately Must have 2+ Years of experience in Framing and finish carpentry. will be working on Mix jobs residentials and commercial , new construction and Renovations Have tools , reliable transport , valid DL & clean background. Pay DOE $20/hr.-$22/hr. (1099) full time and Permanent Job, Weekly pay. Start Immediately We work around Jacksonville and Ponte vedra area .

Job Description Job Description: We are seeking an experienced and highly skilled Senior Welder / Welding Lead to join our team and oversee welding operations across various projects and jobs. In this leadership role you will be responsible for performing advanced welding tasks, guiding and mentoring a team of welders, ensuring quality and safety standards are met, and coordinating with supervisors to meet job deadlines and production goals with both hands-on and team performances. Part Time / Full Time: Full Time Duties and Responsibilities include, but are not limited to, the following: * Lead and mentor a team of welders, providing training, guidance, and support to ensure high-quality workmanship. * Plan and delegate daily welding tasks and ensure deadlines and production goals are met. * Weld repair and manufacture of turbine generator components. * Inspect welds to ensure compliance with manufacture and company standards. * Keep accurate records of welding processes, inspections and repairs as required by company procedures. * Disassembly and assembly of turbine/generator components. * Prep and blend parts. * Work with job site managers/supervisors and quality control to troubleshoot issues and improve welding processes. * Operate forklifts and cranes. * Maintain a clean and safe working environment while adhering to company and OSHA regulations. * Support other areas of the shop as needed. Position Requirements: * 5-10 years of experience preferred. * Familiarity with Power Generation Industry preferred. * Strong leadership capabilities. * Experience with fixture assembly and usage. * Experience and knowledge of precision measurement equipment: Calipers, veneers, ID and OD micrometers, etc. * Ability to read and ¨NBSP; interpret blueprints and technical specifications. * Ability to perform intricate welding tasks on delicate components with high precision and minimal distortion. * Ability to perform weld techniques on specialty metals (INCO, Hastelloy X, carbon, stainless steel, etc.). * Knowledge of metallurgy. * Ability to set up and operate welding equipment. * Mechanical skills. * Communication skills, both verbal and written. * Ability to foresee changes relevant to area of responsibility. * Ability to organize work assignments to ensure efficient operations within the area. * Ability to communicate in a clear and concise manner to achieve intended objective. * Good organizational skills. * Ability to stand and walk for extended periods of time and in environments that require frequent bending, reaching and lifting. * Ability to follow safety guidelines set by customer and ARMS. * OSHA 10 certification, preferred. * Must have a valid driver’s license. * Ability to pass drug test and background check. You should be proficient in: $35 - $45 / hr

Job DescriptionCombo Welder/Fitters & Welders($150 per diem daily)Location: Hollywood, South Carolina Employment Type: Contract to hire (LONGTERM WORK) Compensation: $25–$26/hour + $150 daily per diem - Combo Welders and Fitters $22-$23/hour + $150 daily per diem - Welders Schedule:10–15 hours of overtime weekly Shift Options: Company Overview: Join a nationally recognized leader in steel fabrication for the U.S. defense sector. Our company specializes in manufacturing critical components for naval applications—including aircraft carriers and submarines—contributing directly to the strength of national defense infrastructure. We take pride in fostering a professional, safety-first environment where excellence is both expected and rewarded. Position Summary: We are actively seeking skilled and motivated Combo Welders & Fitters to support the fabrication of high-precision steel components for NAVSEA-related projects. The ideal candidate will possess substantial experience in both flux core and pulse welding techniques, strong fitting skills, and the ability to interpret detailed structural blueprints. Key Responsibilities: • Perform flux core and pulse welding on large steel structures, • Fit and align structural components to blueprint specifications, • Interpret welding symbols and construction schematics with accuracy, • Inspect welds for structural integrity and compliance with NAVSEA standards, • Utilize a variety of measuring tools including tape measures, framing squares, and more, • Maintain a clean, safe, and productive work environmentEssential Skills & Qualifications:, • 3–5+ years experience in structural welding and fitting, • Proficiency in both flux core and pulse welding techniques (required), • Strong blueprint and welding symbol interpretation skills, • Ability to convert fractions to decimals accurately down to 1/16" and 1/32", • Prior experience working in shipyards or on NAVSEA defense-related projects, • 3G Flux Core Weld Test, • 3G Pulse Weld Test, • Blueprint Reading AssessmentBenefits of Joining Our Team:, • Competitive hourly pay and generous per diem, • Opportunities for overtime and extended project assignments, • A strong team culture built around safety, collaboration, and mutual respect, • Weekly pay schedule and comprehensive benefits package, • Long-term career growth within the defense manufacturing industry Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Sep 17, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description NSC Technologies is looking for Marine Carpenters. The Carpenter performs a variety of skilled mechanical duties involving working with equipment, working with Nomex panels, installing various materials, and working with drydock block and crate building. The Carpenter operates equipment for assembly and installation; and follows specified safety policies and procedures. CARPENTER REQUIREMENTS: • Must demonstrate an advanced knowledge of skills, functional knowledge, and abilities to perform tasks in these related areas of responsibility, • Must be able to use hand saws, grinders, table saws, planers, and drill presses (wood and metal frames)., • Conduct inspections and observing how to document imperfections, • Handle electrical grade matting, terrazzo, PRC, Vinyl, etc., • Layout and fabricate a set of steps and handrails, • Read advanced blueprints for measurements, • Utilize hand and power tools to perform carpentry tasks, including framing and trim work., • Read and interpret blueprints to ensure accurate construction and installation., • Collaborate with team members on construction sites to maintain workflow and safety., • Implement mechanical knowledge to troubleshoot and resolve issues during the building process., • Engage in woodworking and other relevant tasks to meet project specifications, • Must have 6 Years experience, • Must pass a background check for Naval base access At NSC Technologies, LLC, our company culture is strong! You work hard for us and in return, we want to provide you with as many benefits and resources as we can: • Competitive pay, • Medical Coverage, • Dental, • Vision, • 401(k), • Long Term Opportunities, • Direct deposit or Global Cash Card, • Employee Assistance Program (EAP), • Training and Career Growth Opportunities, • The chance to be a part of an amazing team NSC Technologies is a drug free company. NSC is an EOE AA/M/F/VHo/D. Company DescriptionNSC Technologies is committed to connecting good people with good jobs! NSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!NSC Technologies is committed to connecting good people with good jobs!\r\n\r\nNSC is an innovative staffing firm that specializes in placing qualified skilled, technical and professional talent in virtually any market. Our meticulous dedication to Quality and Safety is a testament to our success. We are The Staffing Experts!

Job DescriptionWHO WE ARE: Empower Brands was founded in 2022 as a product of the integration of Lynx Franchising and Outdoor Living Brands. Empower encompasses ten industry-leading brands across commercial and residential services: JAN-PRO, FRSTeam, Archadeck Outdoor Living, Outdoor Lighting Perspectives (OLP), Conserva Irrigation, Koala Insulation, Wallaby Windows, Superior Fence and Rail, Bumble Roofing and Canopy Lawn Care. Empower is dedicated to providing its customers with the highest quality products and services in the commercial and home services industry while simultaneously delivering its franchise owners committed personal support, tools and empowerment to pursue their own success. Empower Brands is a portfolio company of MidOcean Partners, a leading private equity firm with an excellent track record investing in successful, growth-focused franchise businesses. For more about Empower Brands, visit the company's new website at EmpowerFranchising.com. Superior Fence & Rail is an industry leader seeking an experienced full time Fabricator/Welder for immediate hire. This position requires 90% of Aluminum Welding. This is an in shop position and the hours are Monday - Friday 7:00am to 3:30 pm. Wage is commensurate with experience, but starts at $20/hr. Full benefits, including health insurance and 401k, are offered. **Please note that all offers of employment are contingent upon passing a background check and drug screening. Job Responsibilities: • Welding/Fitting/Fabricating of Ornamental/Architectural metals, • Aluminum and steel Mig experience required along with cutting, fitting and layout skills, • Basic experience with computer operations and appropriate software, • Valid Florida DL and reliable transportation, • Interact with customers and co-workers in a pleasant and professional manner, • Ability to work independently with little or no supervision, • Ability to treat others with respect and gain trust and respect from subordinates, supervisors, and customers, • Exceedingly positive in his/her work attitude, • Have 2-3 years of Aluminum and steel Mig Experience AND Fabrication experience, • Highly organized with attention to detail, • Possess a strong work ethic, exceptional listening skills and integrity Pay: From $20.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance Shift: • 8 hour shift (7am-3:30pm) Monday-Friday Experience: • Aluminum: 2 years (Required), • Fabrication (railings, gates, etc.): 4 years (Required), • MIG welding: 2 years (Required) Note: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Empower Brands is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Empower Brands makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description Duties and Responsibilities include, but are not limited to, the following: * Weld repair and manufacture of turbine generator components, minaly TIG welding. * Disassembly and assembly of turbine/generator components. * Part/component inspections. * Prep and blend parts. Including but not limited to media blasting. * Work with job site managers. * Operate forklifts and cranes. * Maintain a clean and safe working environment. * Support other areas of the shop as needed. Position Requirements: * Minimum of 1 year experience preferred. * Familiarity with Power Generation Industry preferred. * Knowledge of precision measurement equipment. * Ability to read and interpret blueprints and technical specifications. * Ability to perform welding tasks on delicate components with precision and minimal distortion. * Ability to set up and operate welding equipment. * Mechanical skills. * Communication skills, both verbal and written. * Ability to foresee changes relevant to area of responsibility. * Ability to organize work assignments to ensure efficient operations within the area. * Ability to communicate in a clear and concise manner to achieve intended objective. * Good organizational skills. * Ability to stand and walk for extended periods of time and in environments that require frequent bending, reaching and lifting. * Ability to follow safety guidelines set by customer and ARMS. * OSHA 10 certification, preferred. * Must have a valid driver’s license. * Ability to pass drug test and background check. You should be proficient in: • OSHA 10-Hour Certification (OSHA 10), • Field Measurements, • Welding Setups for Production, • Forklift Licensed, • Deburring Experience, • High School / GED, • MIG Welder, • TIG Welder $24 - $28 / hr

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. bgFcZzNGMU

Job Description Carpenter - demolition and installation

Job Description Position: 1st Class Structural Fitter – 2nd Shift Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A First-Class Structural Fitter with Stellar Energy will have experienced knowledge of industrial structural fitting, assembly, & welding. As well as various terminologies, blueprint reading, measurements, take outs, and job specifications to build an integrally complete erection system. What We’re Looking For Must Have's: • 5+ Years’ experience in Industrial Structural Fitting, • Proficient in reading and interpreting blueprints and technical drawings., • Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary to jamb-nut completion., • Ability to perform accurate measurements and calculations., • Excellent problem-solving skills and attention to detail., • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 6+ Years’ experience in Industrial Structural Fitting., • Tack welding ability, • Some vocational technical training, • Familiarity with Flux-core welding techniques What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $27 / hourly What Hours You Will Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 4:00 pm to 2:30 am. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Position: 1st Class Welder Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing Performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. Willingness to cross train for multi-function structural and piping assembly processes. Fluent in understanding job specific WPS / PQR’s and capable of setting machine up for performance in all positions to certify testing criteria. Analyze blueprints for weld insignia and the application thereof to assembly components on piping and structural systems. The ability to identify correctly, measured, hand dressed, cut and fit prepare metal surfaces for welding process to be completed per job specific requirements. Capable of visual observation of pre- and post-welded surfaces; and the interpretation of fulfilled job requirements with micrometer, caliper and other precision measuring instruments. Technically proficient in the interpretation of insufficient weld criteria and knowledge to efficiently blend to repair. What We’re Looking For Must Have's: • 3+ years’ experience welding., • High school diploma or equivalent (preferred)., • Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in understanding job specific WPS / PQR’s and capable of setting machine up for performance in all positions to certify testing criteria, • Ability to work in confined spaces and wear protective gear for extended periods., • Strong attention to detail and a safety-conscious mindset., • 6+ Years’ experience in Welding SMAW, FCAW and GTAW, or a combination., • 2 years of vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $25 / hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Position: 2nd Class Welder Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing Performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. What We’re Looking For Must Have's: • 1-2 years’ experience welding., • High school diploma or equivalent (preferred)., • Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in understanding job specific WPS / PQR’s and capable of setting machine up for performance in all positions to certify testing criteria, • Ability to work in confined spaces and wear protective gear for extended periods., • Strong attention to detail and a safety-conscious mindset., • 4+ Years’ experience in Welding SMAW, FCAW and GTAW, or a combination., • 2 years of vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $22 / hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionIMMEDIATELY Testing/Interviewing Combo Welders/Fitters & Welders Location: Hollywood, South Carolina Employment Type: Contract to Hire Compensation • Combo Welders & Fitters:$25–$26/hour + $150 Daily Per Diem, • Welders:$22–$23/hour + $150 Daily Per Diem, • $500 Production Bonus if goals are met, • Travel Candidates Eligible for Per Diem for Up to One Year Schedule & Shift Options, • 10–15 Hours of Overtime Weekly, • Night Shift: 4:30 PM – 3:00 AM, Monday–Thursday, • OT Available Friday/Saturday Position Summary We are actively seeking skilled and motivated Combo Welders & Fitters to support the fabrication of high-precision steel components for NAVSEA-related projects. Ideal candidates will have experience in flux core and pulse welding, strong fitting skills, and the ability to interpret detailed structural blueprints. Key Responsibilities • Perform flux core and pulse welding on large steel structures, • Fit and align components to blueprint specifications, • Interpret welding symbols and schematics accurately, • Inspect welds for NAVSEA compliance, • Use measuring tools (tape measures, framing squares, etc.), • Maintain a clean, safe, and productive work environment Essential Skills & Qualifications, • 3–5+ years experience in structural welding and fitting, • Proficiency in flux core and pulse welding (required), • Strong blueprint interpretation skills, • Ability to convert fractions to decimals down to 1/16" and 1/32", • Experience in shipyards or NAVSEA projects preferred, • Familiarity with NAVSEA standards and welding codes is a plus Assessment & Testing Requirements, • 3G Flux Core Weld Test, • 3G Pulse Weld Test, • Blueprint Reading Assessment Why Join Us?, • Competitive pay + generous per diem, • Weekly pay schedule, • Opportunities for overtime and long-term assignments, • Strong team culture built around safety, collaboration, and respect, • Travel support for qualified candidates, • Career growth in the defense manufacturing industry Ready to Weld Your Future? The pay range for this position is $25.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Sep 23, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Position: 2nd Class Structural Fitter Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A Second Class Structural Fitter with Stellar Energy will have experience of industrial structural fitting, assembly, & welding. As well as various terminologies, blueprint reading, measurements, take outs, and job specifications to build an integrally complete erection system. What We’re Looking For Must Have's: • 2+ Years’ experience in Industrial Structural Fitting, • Proficient in reading and interpreting blueprints and technical drawings., • Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary to jamb-nut completion., • Ability to perform accurate measurements and calculations., • Excellent problem-solving skills and attention to detail., • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 3+ Years’ experience in Industrial Structural Fitting., • Tack welding ability, • Some vocational technical training, • Familiarity with Flux-core welding techniques What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $24/ hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Position: 2nd Class Structural Fitter Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A Second Class Structural Fitter with Stellar Energy will have experience of industrial structural fitting, assembly, & welding. As well as various terminologies, blueprint reading, measurements, take outs, and job specifications to build an integrally complete erection system. What We’re Looking For Must Have's: • 2+ Years’ experience in Industrial Structural Fitting, • Proficient in reading and interpreting blueprints and technical drawings., • Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary to jamb-nut completion., • Ability to perform accurate measurements and calculations., • Excellent problem-solving skills and attention to detail., • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 3+ Years’ experience in Industrial Structural Fitting., • Tack welding ability, • Some vocational technical training, • Familiarity with Flux-core welding techniques What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $24/ hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job Description Position: 2nd Class Welder Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing Performing a variety of welding functions in all positions on structural plate and 6G pipe with SMAW, FCAW and GTAW. What We’re Looking For Must Have's: • 1-2 years’ experience welding., • High school diploma or equivalent (preferred)., • Experience in threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Fluent in understanding job specific WPS / PQR’s and capable of setting machine up for performance in all positions to certify testing criteria, • Ability to work in confined spaces and wear protective gear for extended periods., • Strong attention to detail and a safety-conscious mindset., • 4+ Years’ experience in Welding SMAW, FCAW and GTAW, or a combination., • 2 years of vocational technical training What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $22 / hourly What Hours You Will Work This is a full-time position. First shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Travel Nurses, Inc. is seeking a travel Electrophysiology Technician for a travel job in Orange Park, Florida. Job Description & Requirements • Specialty: Electrophysiology Technician, • Discipline: Allied Health Professional, • Start Date: 09/15/2025, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours At the heart of our mission is a profound respect for nurses, whom we consider the cornerstone of healthcare. This acknowledgment extends beyond the nursing profession alone. Travel Nurses, Inc. now proudly embraces a wide array of healthcare professionals, recognizing their crucial roles in our collective mission. Travel Nurses, Inc. is dedicated to providing comprehensive support and opportunities that will help facilitate complete career mobility in the healthcare field. Our commitment to transparency ensures that all professionals, not just nurses, can confidently accept any assignment without financial uncertainties. We prioritize our professionals’ well-being with comprehensive benefits packages, including day-one healthcare coverage, competitive salaries, bonuses and incentives. This underscores our unwavering commitment to offering the best possible rewards and support for all the professionals we serve. Benefits • Weekly pay, • Continuing Education, • 401k retirement plan, • Wellness and fitness programs, • Mileage reimbursement, • Referral bonus, • Employee assistance programs, • Medical benefits, • Dental benefits, • Vision benefits, • Benefits start day 1, • License and certification reimbursement, • Life insurance, • Retention bonus

Job Description • Finish Drywall, • Painting, • Installation of flooring, • Trim Carpentry 1. Customer Satisfaction a. Compile and resolve punch list items. b. May assist or perform final walk-through with customer. c. Secure a signed Completion of Completion and Certificate of Satisfaction from customer.

Job Description Position: 1st Class Structural Fitter Position Type: Full-time, Non-Exempt, Hourly Reports To: Foreman Location: Jacksonville, FL Who We Are Stellar Energy provides bespoke state-of-the-art solutions customers build in for optimized performance now, bridging a critical gap in the energy transition towards a better future. In business for over 25 years, we have added efficiency and capacity to customer infrastructure in more than 15 countries. More dispatchable power. Increased LNG production. Greater Data Center efficiency and lower costs. Lower emissions for greater sustainability. Hyperscale deployment at the best possible speed to first megawatt. All delivered with a 100% performance test passage rate. What You Will Be Doing A First-Class Structural Fitter with Stellar Energy will have experienced knowledge of industrial structural fitting, assembly, & welding. As well as various terminologies, blueprint reading, measurements, take outs, and job specifications to build an integrally complete erection system. What We’re Looking For Must Have's: • 5+ Years’ experience in Industrial Structural Fitting, • Proficient in reading and interpreting blueprints and technical drawings., • Threading, grinding, welding, brazing, rigging, plasma cutting, gas arc cutting, • Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary to jamb-nut completion., • Ability to perform accurate measurements and calculations., • Excellent problem-solving skills and attention to detail., • Physical stamina and the ability to work in various conditions (e.g., confined areas, heights) and physically / medically qualified to wear required PPE, • High School Diploma or GED, • 6+ Years’ experience in Industrial Structural Fitting., • Tack welding ability, • Some vocational technical training, • Familiarity with Flux-core welding techniques What We Offer • Retention Bonuses – Quarterly bonuses in the amount of $300.00, • Medical, dental, and vision insurance beginning on the first day of the month after the start date of employment., • 401k program – Employer Match .01% to 3% is 100% match, 3.01% to 6% is 50% match., • 3-Weeks Paid Time-Off, • 10-Paid holidays a year, • Safety Boot Program – $100.00 reimbursement for the purchase of safety boots, yearly., • Gym Membership, • 2nd Shift Differential – 10% What We Pay Starting at $27 / hourly What Hours You Will Work This is a full-time position. Second shift days and hours of work are Monday through Friday, 6:00 am to 4:30 pm. Occasional evening and weekend work may be required as job duties demand. Work Conditions This position operates out of a fabrication facility. While performing the duties of this job, the employee is sometimes exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment and job sites can be loud. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Stellar Energy Americas Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Stellar Energy Americas Inc. complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

Job DescriptionPosition Type: Full-time, Non-Exempt, Hourly Reports to: General Superintendent/Fabrication Manager Supervisory Responsibility: None Pay Rate: $26-$30 an hour Our client, a leading provider of custom power augmentation and energy plant solutions for power generation and utilities, data center among other industries and other markets is looking for a 1st Class Structural Fitter to join their team. Job Responsibilities: • Fluent in understanding job specification, blueprint reading, target point measurements, true /plumb /square checking, and any necessary torque requirements, for large industrial structural steel systems., • The ability to cut, prep, fit and tack small to large; HSS box tubes, Angle, W-members, Flat Plate, etc., from various material types through true-plumb-square; into weld ready status, using isometric and structural drawings, while adhering to specific fit tolerance requirements., • The ability to properly select, measure, hand dress, score and cut with torch, air arc, plasma, grinder, power saws, hand tools, etc., as necessary to prepare metal surfaces for welding process to be completed per job specific requirements., • Installation knowledge of all forms of structural system hangers, supports, braces, etc., from temporary through jamb-nut completion., • Strong structural aptitude and problem solver who can understand and follow instruction., • Accountability for completion of daily work assignments while monitoring quality, safety, and health regulations., • Operate overhead cranes and or forklifts, while adhering to industry standard practices of safe rigging systems and techniques., • Safely and efficiently direct and monitor two or more helpers., • Documentation of all quality reporting methods employed per SEA Quality Standards., • Complies with all company policies, procedures, and safety requirements and is physically / medically qualified to wear required PPE per OSHA standards., • Responsibilities may require sedentary work, including but not limited to computer operation, video review, classroom or online training, job observations/inspections, and peer work review., • Prepares for ISO 9001 and other audits.Required Skills:, • Collaboration Skills, • Reliable Attendance, • Decision Making, • Leadership, • Communication Proficiency; Written and Verbal, • Ethical Conduct, • Problem Solving, • Organizational Skills, • Thoroughness Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, use hands to finger, handle, or feel, and reach with hands and arms. The employee is occasionally required to sit, climb or balance, and stoop, kneel, crouch, or crawl. The employee must frequently lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Expected Hours of Work: This is a full-time position. First shift days and hours of work are Monday through Friday, 7:00 a.m. to 3:30 p.m. Second shift days and hours of work are Monday through Thursday, 3:00 p.m. to 1:30 a.m. Occasional weekend work may be required as job duties demand. Travel: Travel is primarily not required except for local travel during the business day. Required Education and Experience: • Basic math and language skills required., • Knowledge of threading, grinding, welding, brazing, rigging, plasma cutting, and gas arc cutting., • 5+ years of related experience or training.Preferred Education and Experience:, • 6+ years of experience in Industrial Structural Fitting., • Tack Welding Ability., • Some vocational technical training is desired.Additional Eligibility Qualifications: Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Role and Responsibilities The Lead Carpenter will be responsible for overseeing daily on-site operations, ensuring high-quality craftsmanship, and leading a team to complete projects safely, efficiently, and on schedule. This hands-on leadership role is ideal for a detail-oriented professional with a strong background in residential and commercial carpentry. • Oversee and execute all phases of residential and/or commercial carpentry work on construction projects., • Interpret blueprints, drawings, and specifications to determine project requirements., • Plan work schedules, assign tasks, and ensure crew productivity on-site., • Coordinate with project managers, subcontractors, and other trades to ensure seamless job site operations., • Ensure compliance with building codes, safety regulations, and company standards., • Perform hands-on carpentry tasks, including framing, trimming, drywall installation, cabinetry, doors, windows, and other structural or finish carpentry., • Monitor material usage and order supplies as needed to avoid delays., • Inspect completed work to verify quality and adherence to plans., • Train and mentor junior carpenters and apprentices in carpentry techniques, safety practices, and work ethics., • Maintain a clean, safe, and organized work environment., • Troubleshoot and resolve construction or carpentry-related issues as they arise., • Keep detailed records of labor, materials, and project progress., • Communicate regularly with clients or site supervisors regarding job status and updates., • Operate and maintain carpentry tools and equipment properly and safely. Qualifications and Education Requirements • High School Diploma or GED required., • Valid Driver’s License and reliable transportation., • Comfortable reading and understanding blueprints and technical drawings., • Ability to lift up to 50 pounds., • Strong knowledge of tools and equipment, with demonstrated ability to operate hand tools, air tools, and power tools., • Excellent problem-solving skills and attention to detail. Preferred Skills • Strong reading, writing, and speaking skills (English), • Minimum of 3 years of general carpentry experience preferred., • Ability to read, interpret and follow blueprints, technical diagrams, and schematics.

Job Description Description Maximize customer satisfaction by performing repairs, maintenance work, and installation of various equipment, primarily dock doors and levelers, that meet or exceed the customer's expectations. Respond to customers in a timely, polite, and professional manner, and conduct work with an efficiency that will contribute to the reputation, growth, and profit of Lift Power, Inc. Retain the ability to work on multiple primary duties at any given time. Primary Duties and Responsibilities: • Inspect customer equipment and perform service, maintenance, and installation tasks as necessary, • Communicate needs or concerns to the Coordinator or Department Manager, • Efficiently perform scheduled maintenance per customer contract, • Follow all scheduled maintenance procedures and policies as dictated by the company, • Accurately and neatly document each service call or installation and provide all necessary paperwork, • Complete and submit paperwork and time cards in a timely fashion, • Follow all safety procedures of both Lift Power and the customer when working on a job site, • Use appropriate PPE, • Dispose of waste properly, • Leave jobsites in orderly condition, • Follow current company policy including, but not limited to:, • Maintain the company service vehicle in a clean, orderly, and hazard-free condition, • Includes regular maintenance such as oil changes, tire rotations, etc, • Secure and maintain service and parts inventory in the company vehicle, • Provide well-maintained personal tools required to effectively perform equipment service duties, • Attend all training meetings and seminars provided by the company, • Accept other duties and responsibilities as assigned by managementRequirements, • Prior Professional Commercial dock and door experience required, • Mechanical skills and some knowledge of hydraulics, electrical, and welding preferred, • Ability to perform strenuous and heavy work, • Can exert force up to 100 lbs and frequently handle loads up to 50 lbs, • Can perform continuously with full body motion for climbing, reaching, pushing, lifting, etc., • Have and maintain a valid driver's license and be insurable by Lift Power's insurance company's standards, • Valid CDL license required

Job DescriptionJob Title: Maintenance Technician Job Description The Maintenance Technician role involves performing industrial maintenance on rewinders and press machines within a manufacturing facility. This position requires both mechanical and electrical repair skills, including rewiring 3 phase motors, welding, and fabrication. This is a long-term opportunity with weekly pay, 401k, and medical benefits. Job Overview: • Job title: Industrial Maintenance Technician, • Location: Jacksonville, FL (westside), • Shift: 9:00pm-5:00am (overtime available), • Pay: $27/hr+ (based on skills/experience), • Manufacturing environment (non-climate controlled), • Conduct industrial maintenance on rewinders and press machines., • Perform mechanical and electrical repairs., • Rewire 3 phase motors., • Engage in welding and fabrication tasks., • Troubleshoot industrial machinery., • Conduct electrical troubleshooting and repair from 120v up to 480v., • Perform preventive maintenance and repair tasks., • Work with hydraulics and pneumatics., • 3+ years of industrial maintenance experience., • 3+ years of experience troubleshooting industrial machinery., • Experience performing both mechanical and electrical repairs. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Sep 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Jacksonville's premier cabinet and furniture painting is growing and has a position available! We now have an open 60 day contract position in our field painting division for a bilingual (english/spanish speaking) cabinet painter. This position does have the opportunity for longer employment. • Quality Painting Experience, and Fine Finish Spraying, and experience with two part lacquer is a MUST! * We are an energetic, upbeat company accredited by the BBB. We enjoy a positive work environment and hope to add someone to our team to contribute to the good reviews and extensive growth we are experiencing. Responsibilities Include: • Provide excellent painting services, • Account for and return all painting equipment and supplies back to the Company warehouse once job has been completed., • Follow and uphold all company policies and procedures., • Maintain excellent attendance, client feedback and supervisor evaluations., • Able to move and/or lift 50 lbs. Prerequisites:, • 18+ years old Reliable transportation, • Some prior experience working in a hands-on environment in a comparable industry or in a painting company, especially with tools of the trade, • Must have a minimum of 2 years of fine finish spraying experience experience, preferably fine finish spraying, • Basic prep skills, • Sanding experience, • Fine Finsish Spraying Experience, • Conversion Varnish Experience, • Experience using lacquer, • Caulking experience, • Valid driver license The ideal candidate has: • Professional appearance, • Pride in every job, both large and small, • Attention to detail in all the little things that go into a job well done, • Time management skills, • Able to work well with others

Job Description We’re looking for motivated workers in the Jacksonville area to help load and unload heavy gym equipment at job sites. This is flexible work with consistent pay. Most days you’ll only work 3–5 hours and still earn the full day rate. Sometimes, the job is done in 40 minutes — but your pay doesn’t change. On rare occasions, you may have an 8-hour day. Requirements: • Royal blue shirt & black shorts, • Reliable transportation Help us recruit in Jacksonville and earn bonus pay per day. Travel jobs are also available with travel bonus + mileage reimbursement.

Job Description Bulldozers, Backhoes and Excavators. Have you ever wanted to operate heavy equipment? Join our team! Job description Heavy Equipment Operator - Excavator, Bulldozer and Backhoe We are currently seeking entry level heavy equipment operators with training provided. • Heavy equipment operation for loading, construction, hauling, excavation and daily maintenance of excavators, bulldozers and backhoes, • Prepares sites for building, construction and excavation., • Trenches for irrigation and pipeline, • Must possess high school diploma / GED, • Valid driver’s license, • Work overtime, • Work in confined spaces, • Knowledge of basic tools, • Have ability to lift 50 lbs, • Clean driving record, • Pass a drug test, • Must be willing to travel to various job sites

Job Description Traveling Construction Laborer for our Data Cabling Infrastructure Installation Company We are looking for a labor worker to join our team and travel with us to nationwide job-sites, most being new construction. Previous experience with pulling & terminating data cable is a plus, but not a requirement. We will train. Essential Functions of the Job: • Must be willing to work overtime, standby, & some weekends., • Typical work week could be approximately 50-60 hrs a week depending on job site requirements & deadlines., • The job may entail heavy physical labor, which requires strength & agility. Ability to lift 50lbs., • Projects may be outdoors, in all weather & temperature extremes., • Safety equipment, or PPE is mandatory, such as hard hats, safety vests, safety glasses, gloves, safety harnesses, and appropriate footwear. We will provide the majority of previously stated PPE., • Must have good manual dexterity, hand-eye coordination, & balance., • Must be able to read & understand warning signs & labels on a construction site & interpret plans, drawings, written instructions, & specifications., • Must be capable of working as a member of a team., • Proof of work eligibility., • A US citizen., • Must speak English fluently., • Transportation to & from job site. (Most travel you will ride with one of our lead techs.), • Required to pass pre-employment drug test., • Required to pass thorough background check., • Must have clean driving record., • Reliable transportation with required insurance coverage., • Must possess high school diploma or GED., • OSHA certification is a plus., • Competitive pay, • Paid time off (after 1st year), • Health insurance (medical, dental, & vision), • Paid travel time, • No- Low out of town(travel) expenses, • W-2 (not a 1099), • Direct deposits, • Tools and PPE providedCompany DescriptionWe are a husband & wife team owned company providing reliable data cable infrastructure installation. We value hard work, integrity, and helping our employees grow their skills and career.We are a husband & wife team owned company providing reliable data cable infrastructure installation. We value hard work, integrity, and helping our employees grow their skills and career.

Job DescriptionJob Title: Equipment Mechanic Job Description As a Mechanic C, you will begin your career as an entry-level technician, gaining comprehensive product knowledge and understanding the standards of quality within the branch. You will learn the standard operating procedures at the branch, regional, and national levels, setting the foundation to advance to higher levels of mechanics. Your primary focus will be on utilizing your mechanical training to contribute effectively to fleet maintenance operations, ensuring that the equipment is always ready for rental through a robust preventative and corrective maintenance program. Responsibilities • Follow a consistent schedule for performing preventative maintenance on all fleet equipment at your branch., • Operate and test equipment to ensure it meets quality and efficiency standards., • Perform routine maintenance and repairs on fleet equipment and trucks under direct supervision., • Diagnose small tools and light rental equipment with assistance from tenured mechanics., • Conduct major repairs using diagnostic tools, hand tools, and measuring instruments under supervision., • Carry out oil changes, equipment lubrication, tire replacements, hose repairs, battery replacements, and other services., • Enter work orders and complete part ordering via the fleet management system., • Assist in reconditioning and replacing parts of heavy equipment., • Learn about warranty coverage details., • Maintain a clean and organized work area., • Produce timely and detailed service reports and repair logs., • Follow all company procedures and protocols., • Basic knowledge of electrical and hydraulic systems and a willingness to learn to read schematics., • Ownership of a sufficient selection of hand and air/electric tools for repairs and services., • Ability to operate and test various equipment such as boom lifts, forklifts, compressors, generators, hydraulics, and pumps., • Competency in computer skills for entering information into systems., • Effective and efficient communication skills., • Interpersonal skills and teamwork., • High School Diploma or equivalent., • Ability to lift 50+ pounds and drive/operate multiple types of vehicles and equipment., • Attention to detail and the ability to handle assorted tools properly and safely., • Solid and proven computer skills for entering work orders., • Strong written and verbal communication skills. Join a large company with ample opportunities for growth and advancement. You have the potential to progress to become a road technician with your own truck, supported by a company that values professional development. Work Environment The position is based in a mechanic shop with a hot environment, similar to a sunbelt yard, but with a massive parts warehouse and hanger that is fully covered. Job Type & Location This is a Contract position based out of NA, Florida. Pay and Benefits The pay range for this position is $19.00 - $23.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Jacksonville,FL. Application Deadline This position is anticipated to close on Sep 16, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Employment Type: Full-time Location: Jacksonville, FL Division/Department: MRO/Quality Available vacancies: Multiple About Avmax: Avmax is a diverse company offering every product and service related to aviation. We have locations, operations, and deployment worldwide. Our vision at Avmax Group Inc. ("Avmax") is to simplify our customers' aviation needs through dependable, globally integrated services with trusted results. Established in 1976, our locations include: Calgary (HQ) and Vancouver in Canada, Great Falls and Jacksonville in the USA, Nairobi in Kenya, and N'Djamena in Chad. Avmax offers the following capabilities: Aircraft Leasing, Airline Operations, Avionics, Component Repairs, Engineering, MRO, Paint and Spares. Avmax's engineering division is a Transport Canada authorized Design Approval Organization (DAO). Avmax's maintenance division is a Transport Canada authorized Maintenance Repair Organization (MRO). Why work at Avmax? Avmax has a diverse workforce with opportunity for growth and career advancements. We offer competitive compensation and benefit packages, flexibility, work-life balance and a friendly working environment. We are proud of our work and commitment to create one of the leading workforce, products and services in the Aviation industry. Reporting Structure The position reports directly to the Quality Control Manager. his position assures that inspections and maintenance is carried out to the highest degree of quality and safety. Inspection performance assures compliance with the customer requirements and their maintenance program requirements. The QC Inspector works in direct liaison with production and planning personnel in determining maintenance requirements, coordinating maintenance, and inspection schedules and all modification changes required by a customer/operator. Core Competencies • Accountability, • Attention to detail, • Problem-solving, • Effective communication, both verbal and written, • Confidentiality, • Excellent investigation and critical-thinking ability, • Judgement, • Professionalism, • Act as an RII Inspector for an air carrier on a customer aircraft if approved., • Attend training courses as directed by company management., • Act as a receiving inspector for parts as required., • Ensure work environment is safe and clean., • Promote company values, vision, and mission., • Certify aircraft for return to service., • Directly responsible to carry out inspections and buybacks of the work and technical records on Avmax and customer aircraft as assigned., • Must have a FAA Airframe and Powerplant Certificate (A&P)., • Good knowledge of aviation regulations., • Demonstrated ability to work well with other individuals throughout the organization., • Possesses strong fundamental aircraft knowledge., • Demonstrated capability and competency in field of expertise., • Minimum 3 years' experience in the field. Qualifications: Requirements include an A&P (Airframe and Powerplant) license, excellent oral and written communication skills, the ability to lift up to 50 lbs. NDT experience is preferred. Requirements also include experience with CRJ 200/700, Dash 8, BAE 146, and/or EMB 120/135/145. Company Regulatory Training Requirements - Training will be conducted online unless otherwise specified • HR & IT Orientation (instructor-led), • Safety Orientation (instructor-led), • Occupational Health and Safety, • Safety Management System (SMS), • General Procedures Manual (GPM), • Maintenance Policy Manual (MPM), • Human Factors, • Respect in the Workplace Training, • Workplace Violence and Harassment Training, • Workplace Sensitivity Training, • A Guide to Workplace Incident Investigations, • Duty of Persons Directing Work (Bill C-45), • Management Development Program (instructor-led), • Occupational Health and Safety Awareness Training for Supervisors in All Jurisdictions, • Progressive Discipline, • Supervisor 101 - Avmax Internal Training (instructor-led) NOTE: Most training modules will be assigned as part of the onboarding program and must be completed within the first 3 months of employment. Please refer to your onboarding schedule for further details. Safety Training for Safety Committee Members - (Only Applicable to employees who will be part of the Safety Committee) • A Guide to Workplace Incident Investigations Elective programs and/or courses should meet at least one of the following criteria: • Alignment with core competencies / KPI's, as outlined in the current position profile;, • Development of one's skillset for career progression., • Elective courses can be aligned with a performance development plan. To find out more information please contact your Human Resources Department. All elective programs and/or courses are subject to prior approval by the authorizing Manager. Our recruitment commitments: • We thank all applicants for their interest; however, only those selected for an interview will be contacted., • Depending on qualifications, selected candidates may be offered a role at a more appropriate level., • Avmax Group offers a competitive compensation package including an optimal benefits plan and retirement plan., • Avmax Group Inc. is dedicated to and prides itself on being an EEO/AA We celebrate and welcome the diversity of all of our employees. Avmax Group Inc. has specific policies in place to prevent discrimination in our hiring practices on the basis of the protected groups., • Avmax is a drug free work environment and participates in pre-employment and random alcohol and/or drug screening. Job Posted by ApplicantPro

Job DescriptionAre we the road to your future? We are currently searching for experienced Senior level and entry level CEI Inspectors to support our Southeast Region located in the state of Florida. To be considered for this position, applicants must have, at minimum, a high school diploma or equivalent. What you’ll be doing: • Making and checking engineering computations, • Inspecting construction work, • Conducting field tests, • Writes daily inspection reports, performs verification testing, and documents test results and observations, • Assists in all types of record keeping and field measurements, as needed, • Work is performed under the general supervision of the Project Administrator What you need to have: • High School Diploma or equivalent, • An Engineer Intern with a Civil Engineering Degree, • Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana, Please note that federal regulations may differ from state-specific guidelines. Valid driver's license., • A satisfactory motor vehicle report (MVR). Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: • Employee Stock Ownership Plan (ESOP), • Medical, Dental, & Vision, • 401(k) retirement savings plan + employer matching, • Paid Time Off (PTO) and holidays, • Employer-Paid Life/AD&D insurance, • Employer-Paid short-term disability and long-term disability, • Wellness incentives, • Student Debt Retirement Match, • Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference.” – Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. #LI-DNI

Job DescriptionDescription: Are you an experienced construction inspector looking to take the lead on impactful projects in North Florida? In this role, the CEI Senior Inspector will play a vital role in ensuring quality assurance on roadway projects. You’ll also provide field tests, make and check engineering computations, and guide inspection teams to keep projects moving forward with excellence. If you thrive in the field and excel at problem-solving, this is your opportunity to help shape the future of Florida’s transportation systems. ESSENTIAL JOB FUNCTIONS: · Perform complex technical assignments in field surveying and construction layout. · Make and check engineering computations. · Observe and document construction work. · Conduct field tests. · Coordinate activities of CEI Inspectors and CEI Inspector’s Aides. · Confer with CEI Project Administrator/CEI Project Engineer to determine project details, such as plan preparation, acceptance testing, and evaluation of field conditions. · Confer with CEI Project Administrator/CEI Project Engineer to ensure production and staff problems are resolved. · Examine work progress, equipment, and construction sites to compare actual activities to specifications. · Estimate job requirements. · Provide advice on technical construction matters to client, Contractor, CEI Inspectors, and CEI Project Administrator/Project Engineer. · Plan and conduct field surveys to detail project sites and confirm existing conditions. · Perform quality assurance assessments – assessing the actual to contracted service, materials, and construction. · Act as a liaison between Company staff, client, and Contractors. · Inspect, sample, and test materials entering into the work in accordance with the plans, specifications, and special provisions for the construction Contract to determine that projects are constructed in reasonable conformity with such documents. · Meet deadlines. · Communicate with Company staff frequently using email and telephone. OTHER IMPORTANT FUNCTIONS: · Complete a detailed daily log of construction and inspection activities. · Maintain a safe work environment. EDUCATION AND EXPERIENCE: Education: High School Diploma or equivalent. Experience: 4 years of experience in construction inspection, of which 2 years shall have been in bridge and/or roadway construction inspection. Qualifications: As stipulated by Client and may include: · CTQP Concrete Field Inspector Level I · CTQP Asphalt Roadway Level I · CTQP Asphalt Roadway Level II · CTQP Earthwork Construction Inspection Level I · CTQP Earthwork Construction Inspection Level II · CTQP Pile Driving Inspection · CTQP Drilled Shaft Inspection (required for inspection of all drilled shafts including miscellaneous structures such as sign structures, lighting structures, and traffic signal structures) · IMSA Traffic Signal Technician Level 1 · FDOT Intermediate MOT · CTQP Final Estimates Level I Certifications: Nuclear Radiation Safety Florida Stormwater, Erosion and Sedimentation Control Training and Certification Program for Inspectors and Contractors Other: Valid Driver’s License with an acceptable MVR FDOT Critical Structures Construction Issues self-study course (bridges) Equal Opportunity Employer M/F/Disability/Veteran/AA/DFWP JEACES will not sponsor a work visa (e.g. H1B, etc.,) to fill this position. As a condition of employment with Jones Edmunds & Associates any successful job applicant will be required to pass a pre-employment background investigation, drug screen and motor vehicle report. Requirements:

Job DescriptionBenefits: • Opportunity for advancement, • Paid time off Why Join Us? • Family Feel: We value each team member like family., • Fun at Work: We believe in enjoying what we do while maintaining top-notch professionalism., • Career Growth: Learn valuable skills from the best in the business and grow with us.About the Role As a Wildlife Service Technician Apprentice, you will: • Work alongside a senior technician to secure homes and businesses, removing and preventing wildlife entry., • Learn how to trap and remove wildlife, perform light construction to wildlife-proof structures, and master general pest control and prevention techniques., • Gain hands-on experience while providing exceptional service to our clients.This role offers advancement opportunities for dedicated and exceptional employees who are ready to grow their careers in this rewarding field. What Were Looking For Physical Requirements: • Comfortable with manual labor in varying conditions (Florida heat included!)., • Able to consistently lift over 50 pounds., • Comfortable working on ladders with no fear of heights.Must-Haves:, • A valid Florida drivers license with a clean driving record., • Strong communication skills for daily interactions with customers and teammates., • Punctuality, dependability, and a commitment to excellence., • A clean criminal record and the ability to pass initial and random drug screenings.What We Offer, • Hands-on training with an experienced senior technician., • A supportive, team-oriented environment where your efforts are appreciated. Apply today and take the first step toward a career where youll make a difference every daywhile working with a team that feels like family. Coastal Wildlife & Pest Services Integrity | Professionalism | Expertise | Customer-Centric | Courtesy | Dedication

Job DescriptionDescriptionIf you're a CEI Engineer in Training looking for stability and professional growth, or an experienced CEI Inspector who's ready for the next phase of your career - we'd love to hear from you. As a CEI Engineer in Training, you will be responsible for performing highly complex technical assignments in field surveying and construction layout, making and checking engineering computations, inspecting construction work, and conducting field tests. You will also be responsible for coordinating and managing the lower-level inspectors. *Work is performed under the general supervision of the Project Administrator. Your Primary Responsibilities will include • Daily documentation of contractor’s work efforts., • Project coordination with Contractor’s field personnel and utility owners., • Project field book preparation and documentation., • Density log book preparation and documentation., • Material sampling and testing., • Assisting with preparation of the Final Estimate package., • Measuring distances to verify accuracy of dimensions of construction activity/layout., • Verifying levels, alignment, and elevation of construction activity/installations., • Observing work in progress to ensure that procedures are followed and materials used conform to specifications., • Obtaining and preparing material samples for laboratory testing., • Examining workmanship of finished installations for conformity to standards and accepted installation., • Recording quantities of materials received or used during specified periods., • Maintaining a daily log of construction and inspection activities and comparing progress reports., • Must have EIT - Engineer In Training Certificate, • High School Graduate plus minimum of 4 years of DOT roadway and/or bridge construction experience., • Valid driver’s license with approved/acceptable driving history required., • CTQP Concrete Field Inspector Level I, • CTQP Concrete Transportation Construction Inspector (CTCI) Level II, • CTQP Asphalt Roadway Level I & II, • CTQP Earthwork Level I & II, • CTQP Pile Driving Inspection, • CTQP Drilled Shaft Inspection, • Intermediate MOT, • CTQP Final Estimates Level I, • Nuclear Radiation Safety, • Complete the Critical Structures Construction Issues, Self-Study Course, • Excellent compensation package, • Outstanding holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Mentorship Program, • Tuition Reimbursement, • Parental Leave, • Competitive health and dental insurance premiums, • Variety of voluntary benefit options, • Short-Term Disability/Long-Term Disability, • Company-furnished life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreDRMP is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. #LI-BM1

Job DescriptionDescription: JEACES is looking for a CEI Bridge Inspector to join our team! The CEI Bridge Inspector performs quality assurance assessments to ensure that construction matches the contracted services. The CEI Senior Inspector may lead a team of inspectors on large projects. Under the supervision and direction of the CEI Senior Project Engineer or CEI Project Administrator/Project Engineer, the duties of this position include verifying construction and completing work in accordance with the construction Contract documents. The CEI Senior Inspector provides surveillance of the Contractor's Quality Control activities at the project site. Duties also include maintaining a daily log of construction and inspection activities and comparing progress reports. This position frequently works with little direct supervision. ESSENTIAL JOB FUNCTIONS: • Perform complex technical assignments in field surveying and construction layout., • Make and check engineering computations., • Observe and document construction work., • Conduct field tests., • Coordinate activities of CEI Inspectors and CEI Inspector’s Aides., • Confer with CEI Project Administrator/CEI Project Engineer to determine project details, such as plan preparation, acceptance testing, and evaluation of field conditions., • Confer with CEI Project Administrator/CEI Project Engineer to ensure production and staff problems are resolved., • Examine work progress, equipment, and construction sites to compare actual activities to specifications., • Estimate job requirements., • Provide advice on technical construction matters to client, Contractor, CEI Inspectors, and CEI Project Administrator/Project Engineer., • Plan and conduct field surveys to detail project sites and confirm existing conditions., • Perform quality assurance assessments – assessing the actual to contracted service, materials, and construction., • Act as a liaison between Company staff, client, and Contractors., • Inspect, sample, and test materials entering into the work in accordance with the plans, specifications, and special provisions for the construction Contract to determine that projects are constructed in reasonable conformity with such documents., • Meet deadlines., • Complete a detailed daily log of construction and inspection activities. Education: High School Diploma or equivalent. Experience: 4 years of experience in construction inspection, of which 2 years shall have been in bridge and/or roadway construction inspection. Qualifications: As stipulated by Client and may include: • CTQP Concrete Field Inspector Level I, • CTQP Asphalt Roadway Level I, • CTQP Asphalt Roadway Level II, • CTQP Earthwork Construction Inspection Level I, • CTQP Earthwork Construction Inspection Level II, • CTQP Pile Driving Inspection, • CTQP Drilled Shaft Inspection (required for inspection of all drilled shafts including miscellaneous structures such as sign structures, lighting structures, and traffic signal structures), • IMSA Traffic Signal Technician Level 1, • FDOT Intermediate MOT, • CTQP Final Estimates Level I, • Certifications: Nuclear Radiation Safety, • Florida Stormwater, Erosion and Sedimentation Control Training and Certification Program for Inspectors and Contractors, • Other: Valid Driver’s License with an acceptable MVR Jones Edmunds & Associates will not sponsor a work visa (e.g. H1B, etc.,) to fill this position. As a condition of employment with Jones Edmunds & Associates any successful job applicant will be required to pass a pre-employment background investigation, drug screen and motor vehicle report. Requirements:

Sr HVAC Technician- JLL What this job involves: The Sr HVAC Technician will be responsible for performing maintenance, troubleshooting, repair, and monitoring of HVAC and Mechanical Systems. This role requires advanced technical expertise to diagnose complex system issues, perform preventive maintenance schedules, and execute repairs on heating, ventilation, air conditioning, and related mechanical equipment across commercial facilities. The technician will utilize specialized tools and equipment to monitor system performance, analyze operational data, and identify potential problems before they result in system failures or service interruptions. Additionally, the position involves mentoring junior technicians, coordinating with facility management teams, and ensuring all work complies with safety regulations, building codes, and manufacturer specifications. The Sr HVAC Technician will also maintain detailed service records, recommend system upgrades or replacements when necessary, and respond to emergency service calls to minimize downtime and maintain optimal indoor environmental conditions. What your day-to-day will look like: • System Installation, • Equipment Mounting, • Fabrication & Assembly, • Piping & Connections, • Electrical & Controls, • Testing & Commissioning -, • Maintenance & Repair Required Qualifications: • Duval County JHAR license certification, • EPA Universal License 608 Location: Onsite Jacksonville, FL Work Shift: Shift: MONDAY-FRIDAY 7:30am-4:00pm Salary/ Comp: RATE OF PAY: $39.97 PER HOUR + UP TO $12.20 PER HOUR H&W #BEjobs #HVACjobs #Ejobs #FMjobs #MMjobs #MHVACjobs #OEjobs #PMjobs #PCjobs #GMjobs #Pjobs #ProjMjobs