Craft jobs in Houston, Texas - Page 2Create job alerts

Job Description JOB SUMMARY: Training position that performs a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. Basic cleanup of the shop facilities, blasting, solvent cleaning and painting of rotating equipment parts. ESSENTIAL FUNCTIONS: • Maintain a safe working environment and a commitment to safety excellence., • Responsible for understanding and complying with the safety policy, procedures, and instructions, • Maintaining a clean and organized work area, • Wash and mask parts for hard or bead blast, • Hard blast and bead blast parts (with proper training), • Steam clean and solvent clean parts, • Apply Belzona coatings (with proper training), • Prep and paint parts with approved coatings (with proper training), • General shop cleanup, • Prep shop equipment (balance machines, lathes, mills, etc.) for painting per RMS specifications, • Blast and paint fixtures and skids per RMS specifications., • Assist personnel with logistic issues., • Operate fork truck (training will be required), • Perform other duties as required., • Inner facility parts and large component movement REQUIRED EDUCATION • High School Diploma / GED from an accredited school or institution. JOB REQUIREMENTS AND QUALIFICATIONS: The requirements below are the minimum requirements an employee needs to fulfill this position. They are representative of the knowledge, skills and ability required for the position. • Ability to work in a team environment., • Ability and willingness to work overtime, weekends and holidays, as required., • Ability and willingness to work in an environment of constant pushing, pulling, lifting, stretching, bending and other physical activities., • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting, as required., • Ability and willingness to work around and use large propane / acetylene torches., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Basic oral and written communication skills., • Basic computer and math skills., • Patience, attention to detail, and willingness to learn. EXPERIENCE • At least two years of experience working in an industrial or machine shop setting preferred. OTHER INFORMATION: • The position will be based full time in our Houston, TX facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evening or weekends may be required based on project needs., • Able to understand, read, write and speak English proficiently, • Authorized to work in the United States, • Able to pass a pre-employment drug and alcohol test and background check RMS Inc. may have government contracts that impose specific requirements on employees working on those projects. If an employee does not meet these requirements, they may be reassigned to a different location or be ineligible to work on certain assignments. PHYSICAL REQUIREMENTS • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel. WORK ENVIRONMENT While performing the duties of this position, the employee will be regularly exposed to moving be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Transaction Coordinator — The Heart of the Deal You know that contracts aren’t just paperwork — they’re people. Behind every signature is a client starting a new chapter and an agent trusting you to help them deliver. You’re the person who catches what others miss, solves problems before they surface, and shows up with calm, steady judgment when the stakes are high. In this role, you won’t just be processing transactions — you’ll be protecting clients, supporting agents, and keeping deals on track so everyone crosses the finish line with confidence. You’ll work closely with our agents, clients and success team from contract to close, providing world-class service, thoughtful solutions, and the kind of care that turns stressful situations into success stories. What You'll Do: • Own the transaction process from executed contract to closing — ensuring every detail is correct, every party is informed, and every client feels cared for., • Act as the primary point of contact for clients, agents, lenders, title companies, and cooperating agents — always communicating with kindness, clarity, and urgency., • Identify potential problems early, and solve them proactively — using your judgment to protect the client and the team., • Serve as a trusted resource to agents, freeing them to focus on client relationships while you handle the logistics., • Keep every transaction organized, documented, and compliant while still delivering a personal, human touch., • Practice good judgment when navigating competing priorities, client needs, and tight deadlines — always doing what's right over what's easy., • Use AI / AI Agents to constantly improve the process. Constantly look for ways to improve the client and agent experience, and practice your craft to elevate your skills. Requirements You Might Be a Fit If: • You naturally see yourself as the protector of people and details., • You love being the go-to problem solver — and people trust you to make sound, balanced decisions., • You are calm under pressure and never lose sight of the client’s best interest., • You believe a successful closing is about more than paperwork — it’s about building trust with clients and agents along the way., • You are obsessed with the details because you know they matter., • You take ownership and pride in getting things done the right way. You’ve Probably Faced These Challenges Before: • Incomplete or messy transaction files slowing down closings., • Managing tight deadlines and juggling 15–30+ active transactions without clear processes., • Being the go-to for agents, clients, lenders, and title companies — often all at once., • Handling environments where your proactive, detail-oriented mindset wasn’t fully appreciated. If you’re nodding along — you may be exactly who we’re looking for. Success Looks Like: • Clients consistently say, “I felt so taken care of.”, • Agents trust you completely because you protect their reputation and their clients., • Problems get solved before they ever become visible to the client., • You elevate the team — helping every agent deliver a smoother, more confident client experience. WHAT YOU BRING: • 3+ years of experience coordinating real estate transactions in the U.S., • 12+ months of remote work experience., • Mastery of transaction tools like Dotloop, DocuSign, ZipForm, MLS, and CRM platforms., • A proven system for managing multiple deadlines and prioritizing effectively., • A service-first mindset: you anticipate client and agent needs before anyone has to ask., • The ability to stay calm, professional, and clear — even when clients are stressed and deals are under pressure. WHAT WE OFFER YOU • Freedom to Innovate: We value initiative and welcome improvements to our systems., • Cutting-Edge Tools: We'll equip you with every tool you need to work smart., • Fully Remote (Forever): Work where you work best., • Competitive Pay: Salary + bonus, based on expertise and results., • Real Impact: You’ll directly contribute to smoother transactions and happier clients. ABOUT THE HOUSTON PROPERTIES TEAM At the Houston Properties Team, we help clients and teammates make wise decisions. We view every home and career as an investment in both life and long-term wealth. We’re ranked as the #1 boutique real estate team in Houston with $2+ billion in sales and 1,000+ five-star Google reviews. Our core values drive everything we do: • Accountable: We do what we say, and we stand behind it., • Caring: We treat every client and teammate like they matter — because they do., • Coachable: Feedback helps us grow., • Transparent: We value honesty, not spin., • Knowledgeable: We invest in learning to better serve others. HERE’S WHAT HAPPENS NEXT • Apply: Click “Apply for this job” below and answer the questions., • Live Zoom: If we’re a fit, we’ll schedule a live Zoom with our team leader.

Job DescriptionAbout the Company: Octave is a modern behavioral health practice creating a new standard for care delivery that's both high-quality and accessible. With in-person and virtual clinics in multiple states, the company offers evidence-based individual, couples, and family therapy, while pioneering relationships with payers to make care more affordable through insurance. By raising the bar on how care is delivered and how providers are supported, we are building a sustainable system that values equity, affordability, and effectiveness. About the Role: Octave is hiring Licensed Clinicians to work within an organizational structure to provide high quality behavioral health care to our clients. Octave Clinicians will join a diverse clinical team in providing therapy in a collaborative, client-centered, evolving environment. Octave Clinicians demonstrate strong clinical service thinking, informed by evidence-informed therapies. It is our effort to drive quality access and customize mental health treatment plans and service delivery for our clients. You will treat adult clients with stress, depression, anxiety, or other mental health concerns via video, using short-term, evidence-based therapies. Candidates must be licensed in Texas at the masters or doctoral level, well-versed in evidence-based therapies, like CBT or DBT, and expert in the delivery of culturally responsive care. You are a good fit if you are: • Passionate about expanding access to high-quality mental health care., • Skilled at providing short-term, evidence-based therapies to a diverse range of adult clients., • Adept at building and maintaining a strong therapeutic alliance., • Willing to deliver feedback-informed care using standardized measures., • Expert at providing culturally responsive and culturally competent care., • Open to learning from your colleagues and clients., • Someone who thrives in a culture of thoughtful feedback and transparency.Qualifications:, • PsyD, LMFT, LCSW, LPC, • Current License in Texas., • Master's Degree or higher from an accredited school of Social Work, Psychology, Counseling or Marriage, or Family and Child Counseling., • Must be licensed and in good standing with your governing licensing board., • At least 1 year of related post-license clinical experience required., • At least 2 years of experience preferred in one or more of the following areas:, • CBT for depression or anxiety, • DBT for emotion dysregulation, • Unified Protocol for emotional distress, • CPT or PE for trauma, • We're human beings first. We operate with empathy and kindness – with our clients, with our collaborators, and with ourselves., • People deserve better than status quo. We're willing to tackle the intractable problems, no matter how big, because someone should. We ask big questions, we craft big solutions, and we challenge ourselves and others to make it happen., • No bystanders. No stars. No tourists. Each person has been selected to be here, and with that comes a responsibility to bring your expertise, share your ideas, and help make this company better., • Partnership paves the path ahead. We don't operate in a silo, internally or externally. To transform the system, we believe in working with others to create something bigger, better, and stronger., • Quality is crucial at scale. Quality is core to our business, and we refuse to sacrifice it as we grow., • Progress is a process. In the pursuit of progress, we iterate, reflect, learn, adjust – and always leave things better than we found them., • There are people behind every data point. We recognize that numbers tell only one part of the story, and we also do the work to understand impacts at the individual level.Physical Requirements:, • Prolonged periods sitting at a desk and working on a computer., • Must be able to frequently communicate with others through virtual meeting applications such as Zoom and Google Meet., • Must be able to observe and communicate information on company provided laptop., • Move up to 10 pounds on occasion., • Must be eligible to work in the United States without sponsorship now or in the future., • Octave's policy requires that all clinical sessions be conducted while you are physically located in the United States.System Requirements: Octave IT supports these minimum system requirements for the most optimized experience using Octave telehealth tools:, • Computers that are Mac OS (Ventura or later) and Windows OS (10/11), • Computers kept up with the most recent security updates The hourly compensation range for this role is listed below dependent on licensure: • $116-$130/hour for master's level license. Please complete the following application. Please note that the U.S. Equal Opportunity Employment Information questions below are used for the purposes of EEOC reporting and are optional to complete. Octave is unable to change these questions and we acknowledge that many of the U.S. Equal Opportunity Employment Information questions are not inclusive or affirming of all aspects of cultural identity. Octave is committed to an inclusive workplace environment, and this information will not inform how we approach hiring or employment.

Job DescriptionForgen is dedicated to building a better future - for generations. Location: Houston, TX Travel: 75% Position Summary The Project Engineer I is an entry-level role supporting both office and field operations by assisting with project planning, coordination, documentation, and execution in alignment with budget, schedule, and contract requirements. This position applies engineering principles in soils mechanics, hydraulics, structural theory, and surveying while gaining hands-on field experience. Working closely with project managers, superintendents, and field teams, the Project Engineer I ensures project efficiency, compliance, and quality while upholding Forgen's Core Values and safety culture. Forgen Overview Forgen is a leading geotechnical and specialty civil construction company operating across North America. We are dedicated to delivering innovative solutions for complex civil, geotechnical, and environmental challenges, guided by our core values of integrity, passion, teamwork, and smart work. Key Responsibilities Office Tasks: • Assist in the development of project cost estimates, proposals, and material take-offs., • Perform technical analysis of the remediation methodologies of various previously remediated projects., • Perform other administrative or office duties as required or as assigned., • Travel to project sites as necessary for extended durations., • Preparing project submittals., • Maintaining project record documents., • Perform technical review of contract plans and specifications., • Provide oversight and documentation related to project quality control in accordance with the contract plans, specifications, and company policies and procedures., • Preparing daily construction reports and progress tracking., • Manage, interpret, and perform site surveying., • Assist with the management of subcontractors., • Assist with the procurement or rental of equipment and materials., • Assist Project Manager with project daily cost reporting and tracking., • Bachelor's degree in Civil Engineering, Construction Management, or a related field., • 0-3 years of experience in construction or engineering., • Proficiency in Microsoft Office and basic project management software., • Ability to read and interpret construction documents., • Strong organizational and communication skills., • Internship or co-op experience in construction or engineering, specifically site surveying, earthwork, In-Situ Stabilization, mechanics of solids (particularly of soils), hydraulics, theory of structure, strength of materials, engineering geology., • Proficiency in AutoCAD Civil 3D, Primavera P6, Microsoft Project, and USACE QCS systems., • Experience with site surveying using both conventional and GPS methods., • Assisting in the development of cost estimates and proposals., • Problem Solving & Risk Assessment: Evaluate risks and effectively resolve challenges, champion safety and deliver exceptional quality standards., • Autonomy & Prioritization: Self-motivated, ability to work independently, prioritize and meet deadlines. This office and field hybrid role requires frequent computer use and effective communication. Site work may involve extended periods of standing or walking and required PPE, with potential exposure to heavy equipment, chemicals, dust, fumes, uneven terrain, and extreme weather. This job description outlines the general scope of work and is not exhaustive. Employees may be assigned additional duties as needed. Requirements may be adjusted to accommodate disabilities, except where they pose a direct safety risk. Perks and Benefits Forgen offers a comprehensive benefits package, including medical, dental, vision, retirement plans, bonuses, paid time off, and more. We support a flexible work model for most non-craft positions and provide additional perks like education assistance, wellness programs, and employee awards. Equal Opportunity Forgen is an equal-opportunity employer and prohibits discrimination based on any legally protected status. Agency Policy

About the Company: Octave is a modern behavioral health practice creating a new standard for care delivery that’s both high-quality and accessible. With in-person and virtual clinics in multiple states, the company offers evidence-based individual, couples, and family therapy, while pioneering relationships with payers to make care more affordable through insurance. By raising the bar on how care is delivered and how providers are supported, we are building a sustainable system that values equity, affordability, and effectiveness. About the Role: Octave is hiring Licensed Clinicians to work within an organizational structure to provide high quality behavioral health care to our clients. Octave Clinicians will join a diverse clinical team in providing therapy in a collaborative, client-centered, evolving environment. Octave Clinicians demonstrate strong clinical service thinking, informed by evidence-informed therapies. It is our effort to drive quality access and customize mental health treatment plans and service delivery for our clients. You will treat adult clients with stress, depression, anxiety, or other mental health concerns via video, using short-term, evidence-based therapies. Candidates must be licensed in Texas at the masters or doctoral level, well-versed in evidence-based therapies, like CBT or DBT, and expert in the delivery of culturally responsive care. You are a good fit if you are: • Passionate about expanding access to high-quality mental health care., • Skilled at providing short-term, evidence-based therapies to a diverse range of adult clients., • Adept at building and maintaining a strong therapeutic alliance., • Willing to deliver feedback-informed care using standardized measures., • Expert at providing culturally responsive and culturally competent care., • Open to learning from your colleagues and clients., • Someone who thrives in a culture of thoughtful feedback and transparency. Qualifications: • PsyD, LMFT, LCSW, LPC, • Current License and located in Texas., • Certain payor relationships may exclude you from employment., • Master’s Degree or higher from an accredited school of Social Work, Psychology, Counseling or Marriage, or Family and Child Counseling., • Must be licensed and in good standing with your governing licensing board., • At least 1 year of related post-license clinical experience required., • At least 2 years of experience preferred in one or more of the following areas:, • CBT for depression or anxiety, • DBT for emotion dysregulation, • Unified Protocol for emotional distress, • CPT or PE for trauma, • Preferred if you are currently working with Cigna & Aetna clients., • Required for you have your own office space in the Dallas/Fort Worth/Arlington Area and are willing to provide in-person services. Octave's Company Values: The below values drive our day-to-day operations. • We’re human beings first. We operate with empathy and kindness – with our clients, with our collaborators, and with ourselves., • People deserve better than status quo. We’re willing to tackle the intractable problems, no matter how big, because someone should. We ask big questions, we craft big solutions, and we challenge ourselves and others to make it happen., • No bystanders. No stars. No tourists. Each person has been selected to be here, and with that comes a responsibility to bring your expertise, share your ideas, and help make this company better., • Partnership paves the path ahead. We don’t operate in a silo, internally or externally. To transform the system, we believe in working with others to create something bigger, better, and stronger., • Quality is crucial at scale. Quality is core to our business, and we refuse to sacrifice it as we grow., • Progress is a process. In the pursuit of progress, we iterate, reflect, learn, adjust – and always leave things better than we found them., • There are people behind every data point. We recognize that numbers tell only one part of the story, and we also do the work to understand impacts at the individual level. Physical Requirements: • Prolonged periods sitting at a desk and working on a computer., • Must be able to frequently communicate with others through virtual meeting applications such as Zoom and Google Meet., • Must be able to observe and communicate information on company provided laptop., • Move up to 10 pounds on occasion., • Must be eligible to work in the United States without sponsorship now or in the future. System Requirements: Octave IT supports these minimum system requirements for the most optimized experience using Octave telehealth tools: • Computers that are Mac OS (Ventura or later) and Windows OS (10/11), • Computers kept up with the most recent security updates, • An unmanaged device (a device not provided to you by another company/organization) Additionally, Octave IT does not support using iOS, Android, or ChromeOS as your primary device. Compensation: Starting pay for qualified applicants will depend on a combination of job-related factors, which may include education, training, experience, location, business needs, or market demands. The expected salary range for this role is set forth below and this range may be modified in the future. The hourly compensation range for this role is listed below dependent on licensure: • $116-$130/hour for master's level license., • $116-$140/hour for doctoral level license. Application Instructions: Please complete the following application. Please note that the U.S. Equal Opportunity Employment Information questions below are used for the purposes of EEOC reporting and are optional to complete. Octave is unable to change these questions and we acknowledge that many of the U.S. Equal Opportunity Employment Information questions are not inclusive or affirming of all aspects of cultural identity. Octave is committed to an inclusive workplace environment, and this information will not inform how we approach hiring or employment.

Job DescriptionSkip the line and apply on our website: About Us TeachMe.To is the leading peer-to-peer lessons marketplace, on a mission to connect independent Tennis coaches in Compton | TeachMe.To with aspiring players. As a fast-growing destination for Tennis coach jobs and empower talented professionals to share their passion for the sport. With thousands of coaches and over 2 million students visitng our marketplace, we invite you to join a movement that's shaping the future of Tennis instruction. Sign up today on TeachMe.To! Google search for 'teachmeto apply' or click the button. Role Overview We are seeking skilled and dedicated Tennis Instructors in Compton | TeachMe.To to join our dynamic platform. Whether you're a seasoned Tennis coach or new to the Tennis teacher profession, our flexible model allows you to set your own schedule, define your rates, and work with enthusiastic students ready to improve their performance. Responsibilities • Customized Tennis Coaching: Deliver personalized training that meets each student's unique needs., • Skill Development: Craft lesson plans and training regimens that enhance Tennis techniques, understanding, and confidence., • Positive Learning Environment: Foster a supportive atmosphere that encourages growth, enjoyment, and success in the sport., • Innovative Teaching Strategies: Use effective coaching methods and creative drills to ensure consistent progress, satisfaction, and retention.Requirements, • Previous experience in Tennis coach jobs, Tennis instructor jobs, or similar Tennis teacher roles., • A true passion for Tennis and a strong desire to inspire others., • Excellent communication skills to engage, motivate, and effectively teach students of all levels.Benefits, • Autonomy and Flexibility: Set your own schedule and prices, allowing you to reflect your expertise and availability., • Dynamic Student Base: Get immediate access to eager learners nationwide, expanding your reach., • Zero Hassle: We handle scheduling, payments, and marketing, so you can focus on delivering top-notch Tennis instruction. Apply today:

Job DescriptionCompany Description Assent is the leading solution for supply chain sustainability tailored for the world’s top-tier, sustainability-driven manufacturers. Hidden risks riddle supply chains, many of which weren't built with sustainability in mind. That's where we step in. With insights from experts, Assent is the tool manufacturers trust for comprehensive sustainability. We are proud to announce that Assent has crossed the US$100M ARR milestone, granting us Centaur Status. This accomplishment, reached just 8 years following our Series A, makes us the first and only Certified B Corporation in North America's SaaS sustainability industry to celebrate this milestone. Our journey from $5 million to US$100M ARR in just eight years has been marked by significant growth and achievements. With our $350 million US funding led by Vista Equity Partners, we're poised for even greater expansion and are on the lookout for outstanding team members to join our mission. Hybrid Work Model At Assent, we proudly embrace a remote-first work model, valuing the flexibility and autonomy it provides our team. We also acknowledge the intangible benefits of occasional in-person workdays. For team members situated within 50 kms/31 miles of our five global offices in Ottawa, Eldoret, Penang, Columbus, and Amsterdam, you can expect to come into the office at least one day a week. Similarly, those near our co-working spaces in Nairobi and Toronto are encouraged to work onsite once a month. Job Description The Customer Account Manager is critical to driving retention, renewals and expansion opportunities with Assent’s Customers. They are experienced at developing relationships and understanding customer needs at all levels of Clients including senior executives. This role requires a high performing individual who is driven to succeed and thrives on challenges. Key Requirements & Responsibilities Customer Retention & Renewals: • Build and maintain strong relationships with assigned accounts to ensure customer satisfaction and loyalty., • Identify opportunities to expand revenue and introduce additional programs/solutions to meet customer needs., • Act as a trusted advisor, deeply understanding customers’ business objectives and aligning our product and services to meet them., • Work closely with internal teams to ensure seamless delivery of value., • Meet or exceed targets for renewals, upsells, and net retention., • Maintain accurate records of customer interactions and sales activities in the CRM., • Be familiar with corporate security policies and follow the guidance set out by processes and procedures of Assent.Qualifications We strongly value your talent, energy and passion. It will also be valuable to Assent if you have the following qualifications • 2+ years previous customer service, business development or sales experience in SaaS preferred., • Track record of driving customer retention, renewals, and account growth is a nice to have., • Excellent interpersonal skills - you are able to build and scale stable relationships in a collaborative environment with a diverse group of stakeholders - internally and externally, • Exceptional negotiation and communication skills., • Ability to understand and articulate SaaS solutions and value propositions., • Proficiency with CRM tools and data-driven decision-making., • Highly organized, proactive, and results-oriented. Additional Information Life at Assent Wellness: We believe that you and your family’s well being is important. As a result, we offer vacation time that increases with tenure, comprehensive benefits packages (details vary by country), life leave days and more. Financial Benefits: It’s not all about the money – well, it’s a little about the money. We understand that financial health is important and we offer a competitive base salary, a corporate bonus program, retirement savings options and more. Life at Assent: There is purpose beyond your work. We provide our team members with flexible work options, volunteer days and opportunities to get involved in corporate giving initiatives. Lifelong Learning: At Assent, curiosity is not only valued but encouraged. You will receive professional development days that are available to you the day you start. At Assent, we are committed to growing and sustaining an environment where our team members feel included, valued, and heard. Our diversity and equal opportunity practices are guided and championed by our Diversity and Inclusion Working Group and our Employee Resource Groups (ERGs). Our commitment to diversity, equity and inclusion includes recruiting and retaining team members from diverse backgrounds and experiences, and fostering a culture of belonging where all team members are included, treated with dignity and respect, promoted on their merits, and placed in positions to contribute to business success. If you require assistance or accommodation throughout any part of the interview and selection process, please contact and we will be happy to help.

Job DescriptionAre you a Leader who is looking to travel? • Seeking stability in your next role?, • Love being outdoors and hands-on?If you answered YES, we want to speak with YOU! TRS Craft Services is immediately seeking Crew Leaders for our client, an international provider of high-quality event services and structures. This is a permanent position. Scope of Work: Supervises and coordinates the work of employees who deliver and install event equipment including but not limited to structure, staging, dance floor, tables, chairs. Customer Service • Will make contact with client upon arrival at event site, • Will address any questions or concerns the client may have, • Problem solves for the client to ensure complete satisfaction, • Relies on experience and judgment to plan and accomplish goals, • Prioritizes the steps of the installation for maximum efficiency, • Required to supervise crew up to eight people on event site, • Reports hours for all crew members, • Communicates with Logistics Manager any issues with personnel or loading to optimize efficiency for warehouse and/or events, • Ensures crew is properly trained for all on site work performed, • Has extensive knowledge of company safety procedures and programs, • Responsible for immediately reporting any accidents associated with job or personnel, • Ensures that all employees adhere to company and OSHA safety policies Load and unloads material within the warehouse or at the event site • Utilizes hand trucks, forklifts, hoists and other material handling equipment, • Notes changes to customer contracts such as additional inventory delivered or services performed, • Completes daily time sheets and submits in timely fashion to Logistics, • Responsible for tracking of all tools and other company property on site, • Ability to install tents up to 25m in width, • General knowledge of Amerispan tents, • Basic understanding of carpentry skills, • Complete knowledge of uniflex structures and installation, • Basic knowledge of installation of a fully leveled floor, • Complete knowledge of all frame tents and general knowledge of pole tents, • High School Diploma/GED or relevant work experience preferred, • Previous experience as a general laborerLanguage Skills, • Fluent in English, • Hold valid driver’s license- preferred, • Hold or ability to obtain forklift certification and MEWP type 3 A/B, and classes IV, V and VII, • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to travel for extended periods of time with short notice, • Regularly required to stand and use hands to handle, or touch objects, tools, or controls., • Occasionally required to walk; sit; reach above shoulders; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and use foot/feet to operate machinery, • Regularly lift and/or move up to 75 pounds, • Work in all weather conditions, • Good communication skills and the ability to work in a team environment, • Ability to set priorities and juggle multiple tasks, particularly in a fast paced, deadline-oriented production environment, • Ability to handle constructive criticism, as well as establish achievable goals to foster growth #zrhouston #zrgreenville TRS Staffing Solutions are an equal opportunities employer, and we welcome you to provide OFCCP data voluntarily hereCompany DescriptionOur recruiters are highly experienced in finding skilled craft professionals across construction, engineering, operations & maintenance, project services, commissioning and shutdown/outage needs. This is not a remote position! From the apprentice to the senior discipline supervisor, we have the experience and understanding to match the skills and knowledge of the candidate to your project needs. Stable company, seeking a dependable employee to grow with the company.Our recruiters are highly experienced in finding skilled craft professionals across construction, engineering, operations & maintenance, project services, commissioning and shutdown/outage needs. \r\n\r\nThis is not a remote position!\r\n\r\nFrom the apprentice to the senior discipline supervisor, we have the experience and understanding to match the skills and knowledge of the candidate to your project needs.\r\n\r\nStable company, seeking a dependable employee to grow with the company.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. We are currently in need of Structural Welders to join our team in Sturgeon Bay, WI. $35 hr- $110 per diem Requirements Structural Welder Job Description: • Use of welding process flux core: FCAW, • Use of welding process stick welding: SMAW, • Use of welding positions vertical (3G), horizontal (2G) and overhead (4G), • Must pass welding assessment: Fluxcore vertical test, 2G, 3G, 4G, • Basic math, reading and comprehension skills, • Read and interpret blueprints utilizing both mechanical and standard measurements Per Diem may be provided to eligible employees who travel out of town for work to reasonably reimburse them for some or all daily lodging, meals, and incidental expenses. Referral bonuses to employees who refer qualified candidates. Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. CTS is an EOE AA M/F/Vet/Disability Job Types: Full-time, Contract Pay: $35.00 per hour

Job DescriptionHUTCO, INC. Join the Hutco Family! Job Title: Industrial Staffing Sales Representative Join Our Growing Team! Hutco Inc. is seeking a results-driven Part-time Industrial Staffing Sales Representative to help grow our client base along the Gulf Coast. Based in this region, you’ll connect top-tier marine professionals with trusted shipyards and contractors. Since 1986, Hutco has been the go-to source for dependable craft labor. Now we’re ready to grow with your help. Key Responsibilities: • Identify and develop new business opportunities across the marine industry, • Build strong relationships with shipyards, contractors, and key decision-makers, • Collaborate with management to shape and implement growth strategies, • Stay ahead of industry trends to deliver forward-thinking solutionsWhat We’re Looking For:, • Proven success in sales, ideally with 5+ years in marine staffing or related fields, • Solid understanding of the marine industry and workforce needs, • Strong interpersonal skills and a knack for building lasting connections, • Willingness to travel throughout the Gulf Coast, • Proficient with Microsoft Office tools, • Bachelor’s degree in Business or Marketing (or equivalent hands-on experience), • Valid driver’s license and insuranceWhy Join Hutco:, • Competitive base salary plus performance bonuses, • Monthly cell and auto allowance, • Company-provided laptop Send your resume to: Hutco, Inc. is proud to be an Equal Opportunity Employer (EOC). #HUTCOSP

Job Description Heavy Equipment Diesel Technician / Mechanic (Field & Shop) Are you an experienced and highly skilled Diesel Technician ready to tackle a diverse range of heavy construction equipment? If you have a strong work ethic, are enthusiastic about your craft, and thrive in both shop and field environments, this is the perfect opportunity for you. We pride ourselves on a positive work atmosphere where our equipment rental department collaborates closely to achieve daily tasks. This role offers the chance to grow your expertise while benefiting from comprehensive support and a rewarding work environment. What You'll Do: * Perform minor and major repairs on various makes and models of heavy construction equipment. * Conduct regular preventative maintenance (PM) and periodic maintenance to ensure equipment reliability. * Execute diagnostic tests on equipment, utilizing proprietary manufacturer communication software as needed. * Collaborate effectively with colleagues and management to accurately diagnose problems and plan efficient repairs. * Maintain accurate records of all repairs performed on vehicles and equipment. * Manage parts inventory and maintain cleanliness within the shop area. What We're Looking For: * 5+ years of proven experience as a Diesel Mechanic, specifically with heavy construction equipment. * In-depth knowledge of Heavy Equipment Hydraulics and Electrical systems, with strong troubleshooting capabilities. * Ability to diagnose issues using manufacturer software. * Capable of lifting up to 45 pounds. * Excellent reading and writing skills. * Proficiency in basic computer operations. * A valid Driver's License (CDL Class A is a plus). * Demonstrated strong work ethic and enthusiasm in the workplace. * Operates with the highest level of integrity, is humble, and follows directives. Benefits & What We Offer: * Competitive Pay commensurate with experience, plus Bonus Pay. * Comprehensive Benefits Package: Health, Dental, Vision, Life Insurance, Short-term, and Long-term Disability. * 401(k) with company match. * Paid Time Off (PTO). * Opportunities for training and paid ASE Certifications. * Company-provided uniforms and special tooling. * Assistance with moving your toolbox if needed. * A positive, team-oriented work environment. This role requires a blend of field and on-site work at our yard. If you're a skilled Diesel Technician seeking a supportive environment where your expertise is valued, we encourage you to apply!

Job Description Job Title: Refugee Health Promotion Case Worker FLSA Status: Exempt Department: Refugee Services Reports to: Community Engagement Manager Typical Workhours: Typically, 40 hours per week, with flexibility for extra hours when required Education: Bachelors degree required Related Experience: Experience with refugees and immigrants highly desired Licenses & Certifications: N/A About the Organization Interfaith Ministries for Greater Houston, now IM Houston, is Greater Houston’s longest-serving interfaith-based social services organization. Originally founded in 1964 as Protestant Charities, we’ve evolved to reflect Houston’s rich diversity of faiths and cultures. Our mission is to bring people of diverse faith traditions together for dialogue, collaboration, and service, as a demonstration of our shared beliefs While our name and logo have been refreshed, our commitment to empowering individuals and uniting communities has never been stronger. Our core services include: • Meals on Wheels/Animeals, • Refugee Services, • Interfaith Relations and Community Partnerships, • Volunteer Houston Position Summary The Refugee Health Promotion (RHP) Case Worker is responsible for assisting in the coordination and delivery of the RHP program, including client outreach, service enrollment, and ongoing support. This role facilitates culturally and linguistically appropriate health education, connects clients to health resources, and promotes health through wellness groups and art. The Case Worker also designs and implements community engagement (CE) activities that promote refugee health and well-being. They will build and maintain partnerships with community organizations to enhance program resources and work closely with internal IM Houston departments to ensure seamless service delivery and achievement of program goals. Main Responsibilities • Provide language interpretation and translation (in language of proficiency), • Work with the CE Program Manager and the team on the Refugee Health Promotion program and activities., • Conduct recruitment and intake interviews to obtain necessary case information for clients for the Refugee Health Promotion program and as needed., • Analyze client needs and provide information to clients on the services available through Refugee Services according to ORR guidelines and eligibility requirements., • Conduct home visits and assessments as needed with clients in the RHP program., • Assist with case management and assistance as needed, ensuring all services are properly documented in client case files., • Assist in maintaining accurate and up-to-date client records, including case notes, assessments, and required documentation for program compliance., • Assist the CE Program with administrative tasks such as scheduling, filing, and maintaining program materials., • Enter client information into Client Track and Refugee Management System Databases. Assist with filing documentation in case files as needed., • Work with CE Program Manager and the team to organize and conduct weekly Women’s Empowerment Groups, Refugee Youth programs and other related activities including RefugeeCare Navigator App downloads and workshops., • Setup and supervise group communication networks (Whats App/Email/Group Texts) in language of proficiency., • Conduct Volunteer orientation, onboarding, and volunteer database management as needed., • Work to coordinate volunteers involved in:, • Providing transportation to the women/men and their children to and from groups, • Providing advocacy for women/men based on situational needs., • Providing childcare and age-appropriate craft activities at groups, • Providing one-on-one English conversational practice, • Working on additional Community Engagement programs/projects (example: Robotics program), • Assist families with children to enroll their kids in school., • Complete paperwork documenting donations and deliveries., • Provide mediation services between new arrivals and outside entities (i.e., neighbors, landlords, volunteers, service providers, etc.), • Assistance with applications to services such as schools, transportation, public benefits, employment, and health services, ensuring the family has basic needs and housing, and follow up as needed., • Meet with clients to determine their need for items and communicate with them about deliveries., • Attend RS and Community Engagement/WEG/Men’s Support group planning and information meetings., • Perform other duties as assigned by supervisor. Qualifications, Skills & Experience • Bachelor’s degree required. Experience with refugees and immigrants highly desired., • Proficiency in Microsoft Office, especially Word, Excel, and PowerPoint. Ability to quickly learn Refugee Management System database., • Excellent written and verbal communication skills., • High degree of independent judgment., • Must enjoy working with culturally and ethnically diverse staff, clients, and volunteers., • Excellent interpersonal skills. Able to interact well with all levels and work effectively on a team., • Must be able to work a flexible schedule including late nights and some weekends., • Must have an automobile, valid driver’s license, and automobile liability insurance., • Fluency in one of the refugee languages (Dari, Spanish, Pashto, and Arabic) preferred. IMGH is an Equal Opportunity employer. All applicants will be considered for employment without attention to race, age, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

About the Company: Octave is a modern behavioral health practice creating a new standard for care delivery that’s both high-quality and accessible. With in-person and virtual clinics in multiple states, the company offers evidence-based individual, couples, and family therapy, while pioneering relationships with payers to make care more affordable through insurance. By raising the bar on how care is delivered and how providers are supported, we are building a sustainable system that values equity, affordability, and effectiveness. About the Role: Octave is hiring Licensed Clinicians to work within an organizational structure to provide high quality behavioral health care to our clients. Octave Clinicians will join a diverse clinical team in providing therapy in a collaborative, client-centered, evolving environment. Octave Clinicians demonstrate strong clinical service thinking, informed by evidence-informed therapies. It is our effort to drive quality access and customize mental health treatment plans and service delivery for our clients. You will treat adult clients with stress, depression, anxiety, or other mental health concerns via video, using short-term, evidence-based therapies. Candidates must be licensed in Texas at the masters or doctoral level, well-versed in evidence-based therapies, like CBT or DBT, and expert in the delivery of culturally responsive care. You are a good fit if you are: • Passionate about expanding access to high-quality mental health care., • Skilled at providing short-term, evidence-based therapies to a diverse range of adult clients., • Adept at building and maintaining a strong therapeutic alliance., • Willing to deliver feedback-informed care using standardized measures., • Expert at providing culturally responsive and culturally competent care., • Open to learning from your colleagues and clients., • Someone who thrives in a culture of thoughtful feedback and transparency. Qualifications: • PsyD, LMFT, LCSW, LPC, • Current License and located in Texas., • Certain payor relationships may exclude you from employment., • Master’s Degree or higher from an accredited school of Social Work, Psychology, Counseling or Marriage, or Family and Child Counseling., • Must be licensed and in good standing with your governing licensing board., • At least 1 year of related post-license clinical experience required., • At least 2 years of experience preferred in one or more of the following areas:, • CBT for depression or anxiety, • DBT for emotion dysregulation, • Unified Protocol for emotional distress, • CPT or PE for trauma, • Preferred if you are currently working with Cigna & Aetna clients., • Required for you have your own office space in the Houston/Pasadena/The Woodlands and are willing to provide in-person services. Octave's Company Values: The below values drive our day-to-day operations. • We’re human beings first. We operate with empathy and kindness – with our clients, with our collaborators, and with ourselves., • People deserve better than status quo. We’re willing to tackle the intractable problems, no matter how big, because someone should. We ask big questions, we craft big solutions, and we challenge ourselves and others to make it happen., • No bystanders. No stars. No tourists. Each person has been selected to be here, and with that comes a responsibility to bring your expertise, share your ideas, and help make this company better., • Partnership paves the path ahead. We don’t operate in a silo, internally or externally. To transform the system, we believe in working with others to create something bigger, better, and stronger., • Quality is crucial at scale. Quality is core to our business, and we refuse to sacrifice it as we grow., • Progress is a process. In the pursuit of progress, we iterate, reflect, learn, adjust – and always leave things better than we found them., • There are people behind every data point. We recognize that numbers tell only one part of the story, and we also do the work to understand impacts at the individual level. Physical Requirements: • Prolonged periods sitting at a desk and working on a computer., • Must be able to frequently communicate with others through virtual meeting applications such as Zoom and Google Meet., • Must be able to observe and communicate information on company provided laptop., • Move up to 10 pounds on occasion., • Must be eligible to work in the United States without sponsorship now or in the future. System Requirements: Octave IT supports these minimum system requirements for the most optimized experience using Octave telehealth tools: • Computers that are Mac OS (Ventura or later) and Windows OS (10/11), • Computers kept up with the most recent security updates, • An unmanaged device (a device not provided to you by another company/organization) Additionally, Octave IT does not support using iOS, Android, or ChromeOS as your primary device. Compensation: Starting pay for qualified applicants will depend on a combination of job-related factors, which may include education, training, experience, location, business needs, or market demands. The expected salary range for this role is set forth below and this range may be modified in the future. The hourly compensation range for this role is listed below dependent on licensure: • $116-$130/hour for master's level license., • $116-$140/hour for doctoral level license. Application Instructions: Please complete the following application. Please note that the U.S. Equal Opportunity Employment Information questions below are used for the purposes of EEOC reporting and are optional to complete. Octave is unable to change these questions and we acknowledge that many of the U.S. Equal Opportunity Employment Information questions are not inclusive or affirming of all aspects of cultural identity. Octave is committed to an inclusive workplace environment, and this information will not inform how we approach hiring or employment.

Job Description With a strategy centered on people and sustainability, Braskem is engaged in contributing to the value chain to strengthen the Circular Economy. Braskem's 9,000 team members dedicate themselves every day to improving people's lives through sustainable solutions in chemicals and plastics. With its corporate DNA rooted in innovation, Braskem offers a comprehensive portfolio of plastic resins and chemical products for diverse industries, such as food packaging, construction, manufacturing, automotive, agribusiness, health and hygiene, and more. With 40 industrial units in Brazil, the United States, Mexico, and Germany, Braskem exports its products to clients in over 70 countries. Braskem America is an indirect wholly owned subsidiary of Braskem S.A. headquartered in Philadelphia. The company is the leading producer of polypropylene in the United States, with six production plants located in Texas, Pennsylvania, and West Virginia, an Innovation and Technology Center in Pittsburgh, and a New Renewable Innovation Center in Boston focused on leveraging groundbreaking developments in biotechnology and advanced materials. For more information, visit . Department: Manufacturing, Maintenance & Reliability Location: LaPorte, Houston, TX Travel Involved: 0-5% Description The Instrument/Electrical Engineer is part of the Maintenance and Reliability Group supporting plant operation and reliability improvement efforts for Braskem's Seadrift facility. Working in a team environment, the engineer is responsible for implementing reliability best practices, developing and optimizing preventive maintenance tasks, and supporting maintenance activities. Responsibilities Include: • Provide day-to-day technical support in the field (craft & planners) for instrumentation and electrical issues & projects., • Manage (approve/reject) Preventative Maintenance (PM) and inspection deferrals, • Own and manage area maintenance procedures as assigned and ensure that equipment files, spare parts, and Bill of Materials (BOMs) are constantly updated and appropriately filed., • Understand obsolescence and upgrade requirements for equipment and spare parts and ensure that information in SAP or equipment files is up to date., • Develop/complete required Management of Change for maintenance activities (obsolete instrumentation upgrades, solenoid modifications, calibrations, etc), • Troubleshoot and diagnose equipment failures/defects for job planning, either for improvements or repairs or assist craftsmen in charge of doing so., • Provide technical support/expertise within your discipline in the design and installation stages of projects for new assets and modifications of existing assets to minimize life cycle costs and maximize asset availability/reliability., • Create and lead maintenance capital projects for equipment rebuilds or reliability improvements utilizing the Clarity tool and following Braskem's Capital Project Work Process. Will lead several electrical upgrade projects for the site., • Lead root cause inquiry related to equipment failures in area of responsibility, as required, and formally issue the reports and present for management review and approval., • Maintains Maximo calibration records, • Conducts/manages Universal waste inspections and documentation, • Manages RTAC system for primary power distribution, • BS degree in Electrical Engineering with 0-5 years of relevant experience, • Understanding of industry codes and standards (i.e., IEEE, ISA, NFPA, NEC), • Instrumentation and measurement technology, • Low and high-voltage power distribution and controls, • Safety Instrumented System specification, design, and implementation, • Analyzers and sample systems, • PLC maintenance and functionality, • Reliability Engineering concepts and data scrutiny techniques, • Experience in the refining, petrochemical, or chemical process, • RCA experience TapRoot or ProAct, • Experience with SAP and Maximo applications., • Strong interpersonal skills for effective communication of complex issues, as well as for mentoring and alignment building., • Balanced strategic and tactical focus, being creative and innovative, and demonstrating problem-solving, organizational, and planning skills. What we offer At Braskem, we offer more than just a competitive pay package. Our total rewards package includes a wide range of benefits you need for every stage of your life. Our benefits include: • Medical, Dental, and Vision Benefits, • Retirement Benefits, • Maternity and Paternity Leave, • Life Insurance, • Short- and Long-Term Disability Insurance, • Teladoc, • A wide range of voluntary benefits like Pet Insurance, Legal and ID Theft Insurance Candidates must be currently eligible to work in the United States without the need for any type of sponsorship now or in the future. Braskem is committed to equal employment opportunity and providing reasonable accommodations to qualified candidates and employees according to applicable law. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, gender, sex, age, religion, creed, national origin, ancestry, citizenship, marital status, sexual orientation, physical or mental disability, medical condition, military and veteran status, gender identity or expression, genetic information, or any other characteristic protected by federal, state, or local law. If you require reasonable accommodation as part of the application process, please contact the Talent Acquisition team.

Job DescriptionBenefits: • Competitive salary, • Dental insurance, • Health insurance, • Opportunity for advancement, • Paid time off Job Summary: We are looking for a skilled professional to update, maintain, and enhance our website while managing all marketing and social media efforts for our multi-location health club business. This role requires a creative, organized individual with expertise in web design, digital marketing, and social media strategy to strengthen our brand and attract new members. Key Responsibilities: Website Management: Update and maintain the company website to ensure functionality, user-friendliness, and alignment with brand standards. Implement design changes, including responsive layouts, UI/UX improvements, and content updates using platforms like WordPress, Wix, or Webflow. Optimize website for SEO, load speed, and mobile compatibility. Troubleshoot technical issues and coordinate with third-party vendors as needed. Integrate features like class schedules, membership sign-ups, and e-commerce functionality. Digital Marketing & Social Media: Develop and execute comprehensive marketing campaigns to promote gym memberships, classes, and events across all locations. Manage social media accounts (e.g., Instagram, Facebook, Tik Tok) by creating engaging content, including posts, stories, and videos, tailored to our fitness community. Design visually appealing graphics and promotional materials, incorporating brand elements like our neon glow logo or patriotic themes for events (e.g., Memorial Day Murph Workout). Monitor social media performance using analytics tools and adjust strategies to increase engagement and follower growth (targeting 5,000-100,000 followers per platform). Implement paid ad campaigns on platforms like Google Ads, Facebook Ads, and Instagram, optimizing for ROI and lead generation. Craft email marketing campaigns and newsletters to nurture member relationships and promote special offers. Brand & Strategy: Align all digital content with FIT LIFEs brand identity, ensuring consistency across web, social, and marketing materials. Analyze website and marketing performance using tools like Google Analytics, providing regular reports with actionable insights. Stay updated on fitness industry trends and competitor strategies to keep our marketing efforts innovative. Collaborate with club managers to highlight location-specific promotions or events. Qualifications: Bachelors degree in Marketing, Graphic Design, Web Development, or related field (or equivalent experience). 3+ years of experience in web design/development and digital marketing, preferably in fitness, hospitality, or multi-location businesses. Proficiency in web design tools (e.g., Adobe XD, Figma) and CMS platforms (e.g., WordPress, Wix, Squarespace). Strong knowledge of HTML, CSS, and SEO best practices; JavaScript a plus. Expertise in social media management tools (e.g., Hootsuite, Buffer) and ad platforms (e.g., Meta Ads Manager, Google Ads). Experience with graphic design software (e.g., Adobe Photoshop, Canva) for creating branded visuals. Excellent written and verbal communication skills for crafting compelling marketing copy. Analytical mindset with experience using Google Analytics, social media insights, or similar tools. Ability to manage multiple projects and meet deadlines in a fast-paced environment. Passion for fitness and understanding of the health club industry is a plus. Preferred Skills: Experience managing websites with e-commerce or booking systems. Familiarity with video editing for social media reels or promotional content. Proven success growing social media followers and engagement (e.g., achieving 338+ Facebook friends or 150+ Instagram followers as a baseline). Ability to incorporate creative themes (e.g., fitness related material, Brand consistent verbiage and images, and patriotic designs for holidays) into marketing assets. Compensation & Benefits: Competitive salary based on experience (60,000 -75,000 annually, depending on qualifications). Company pays for 50% of medical insurance (after the required 90 day probation period for new employees is completed) and the employee pays for the other 50% as well as dental/ vision insurance. Complimentary gym membership for all locations. Opportunities for professional development and growth. How to Apply: Please submit your resume, a portfolio showcasing web design and marketing projects, and a brief cover letter explaining why youre a great fit for FIT LIFE Health Clubs to . Applications will be reviewed on a rolling basis. Note: Candidates will be asked to provide examples of past website updates and social media campaigns, including metrics like follower growth or engagement rates.

Job Description The Account Executive position requires you to take initiative, have a strong work ethic, and to have attention to detail. The Account Executive for the Vergara Miller Law Firm needs a unique blend of skills that align with both marketing and legal industry demands; focused on increasing the firm's visibility, attracting new clients, and building relationships within the legal and local community. Skills * Clear understanding of Legal Services * Proficiency in lead generation, client conversion, and relationship management to attract and retain clients. * Ability to craft and promote a strong, consistent brand identity for the law firm across all platforms. * Skills in organizing and promoting events like seminars, workshops, or community outreach programs. * Strong networking abilities to connect with potential clients, referral sources, and industry professionals & Capacity to build and maintain long-term relationships with clients, partners, and community leaders. * Competence in managing media relations, writing press releases, and securing positive coverage for the law firm. * Strong Communication Skills - Ability to effectively present the firm’s services and value proposition to potential clients and partners. * Ability to conduct and interpret market research to identify trends, opportunities, and client needs. * Ability to manage multiple projects, campaigns, and events simultaneously while meeting deadlines. * Strong organizational skills to handle logistics, budgeting, and scheduling for various promotional activities. * Developing innovative promotional strategies and solutions to challenges. * Ability to adjust strategies based on market changes, client feedback, and evolving legal trends. * Familiarity with CRM systems, email marketing software, social media management tools, and analytics platforms. Roles & Responsibilities: * Client Acquisition: * Develop and implement strategies to attract potential clients to the law firm. * Identify target markets and reach out to individuals, businesses, and organizations that may require legal services. * Generate and follow up on leads, converting them into clients for the law firm. * Brand Awareness: * Promote the law firm’s brand, highlighting its areas of expertise, success stories, and unique value propositions at national events. * Ensure consistent branding across all marketing materials, social media, and communications. * Networking: * Attend legal conferences, networking events, and community gatherings to represent the law firm. * Build and maintain relationships with referral sources, such as other legal professionals, businesses, and community leaders at national events to expand the firm’s reach and influence.. * Collaborate with local business associations, chambers of commerce, and other organizations to increase the firm’s visibility. * Content Marketing: * Assist in creating and distributing informative content, such as blog posts, newsletters, and articles, that showcase the firm’s legal expertise. * Promote the firm’s thought leadership through social media, webinars, podcasts, and other digital platforms. * Event Coordination: * Plan and coordinate law firm events, such as seminars, workshops, or open houses, to engage with potential clients and the community. * Manage logistics, promotion, and follow-up activities to ensure successful events. * Represent the law firm at industry conferences, trade shows, and networking events across the country. This includes coordinating travel logistics and ensuring the firm’s presence is impactful at these events. * Client Relationship Management: * Develop and maintain relationships with current and former clients to encourage repeat business and referrals. * Implement client feedback programs to understand their needs and improve service offerings. * Legal Community Engagement: * Engage with local bar associations, legal societies, and other professional organizations to enhance the firm’s reputation within the legal community. * Support the firm’s participation in pro bono work, legal aid initiatives, or community outreach programs. * Market Research: * Conduct research to understand the competitive landscape, client needs, and market trends. * Provide insights to the law firm’s partners and marketing team to refine services and marketing strategies. * Compliance and Ethics: * Ensure all promotional activities adhere to legal and ethical standards specific to the legal industry. * Understand and comply with advertising and marketing regulations for law firms, including those set by the state bar association. * Public Relations: * Manage the firm’s public relations efforts, including handling media inquiries, writing press releases, and securing media coverage. * Respond to any negative publicity or online reviews in a professional and ethical manner. * Reporting and Analytics: * Track the success of marketing and promotional activities, providing regular reports to the firm’s leadership. * Use analytics to measure ROI and refine strategies for better results. The goal of the Account Executive is to strategically enhance the firm's reputation, attract new clients, and build lasting relationships that support the growth and success of the practice. Company DescriptionAt Vergara Miller Law Firm, our mission is to be the catalyst for positive change in the lives of immigrant families. Our highly focused team of adept leaders who excel in managing team outputs with precision, is driven by a commitment to excellence, integrity, and social impact.At Vergara Miller Law Firm, our mission is to be the catalyst for positive change in the lives of immigrant families. Our highly focused team of adept leaders who excel in managing team outputs with precision, is driven by a commitment to excellence, integrity, and social impact.

Job DescriptionDescription: Transform Local Businesses with Cutting-Edge Campaigns! (Remote Outside Sales Opportunity in the Houston, TX Area) Are you excited by the intersection of direct mail, digital, and e-commerce innovation? Do you want to be at the forefront of modern media solutions that drive results for local businesses? Does helping your local community thrive sound rewarding? If so, join us as a Media Sales Consultant at Valpak & Clipp where you’ll craft campaigns that seamlessly integrate the power of direct mail with advanced e-commerce and digital strategies. What You’ll Do: • Innovative Campaigns: Design and execute integrated campaigns combining direct mail, digital, and e-commerce solutions to deliver results for local businesses., • Data-Driven Strategies: Utilize best-in-class data and analytics to design and implement marketing strategies that deliver outstanding results for your clients., • Relationship Building: Develop and maintain strong relationships with small and medium-sized businesses. Use your determination and skills to generate new leads and expand your client base. What We Offer: • Competitive Compensation: Enjoy a $40,000 base salary plus $15,000 in guaranteed commissions for your first year, with uncapped earning potential. First-year income is estimated at $70,000 to $75,000, with potential to exceed $100,000 as your business grows., • Comprehensive Training: Receive paid training to master our processes and sales tools, equipping you to deliver exceptional results., • Advanced Tools: Access state-of-the-art technology for data and analytics, enabling you to create impactful, multi-channel campaigns., • Incentives & Rewards: Participate in exciting contests and earn rewards, including trips and prizes., • Robust Benefits Package: Includes Medical, Dental, and Vision insurance starting the first of the month after hire, automatic 401k enrollment after 30 days, and generous paid time off., • Dynamic Work Culture: Experience a casual, inclusive, and growth-oriented environment that values diversity and promotes from within. What We’re Looking For: • A forward-thinking, tech-savvy individual who thrives in a dynamic, fast-paced environment., • 2+ years of experience in sales and relationship building, preferably with a background in media or direct mail., • A driven individual with a passion for integrating traditional and digital marketing to deliver innovative solutions. Ready to Make a Difference? If you’re excited about providing local businesses with capabilities typically only afforded to larger businesses, we want to hear from you. Invest in your future by applying today and embark on a rewarding career with Valpak & Clipp! #LI-RS1 Requirements:

Job DescriptionCurrently we are hiring Part-time Teachers that is fluent in working with all ages. The perfect applicant will ensure that children are safe and well behaved. Designs craft projects and other creative activities for children to complete. Provide snacks and meals for children. Make sure daycare center is clean and organized. Oversee children as they play outside. Monitors interactions between children at all time. Discipline children when necessary using appropriate measures according to licensing guidelines. Provide updates to parents on children’s behavior and progress. Administers first aid when necessary. Comforts children who are homesick or upset. Design/Create activities that help children learn alphabet and basic reading skills. Arrange and oversees rest times or naptimes. Feeds, changes, and carries infants at times. Assists in recruiting, training, and overseeing teacher’s aides. Administers care to sick children. Contacts parents in the event of an emergency. Answers parent inquiries/concerns. Addresses and resolves disputes among children. Required Knowledge, Skills and Abilities: -Demonstrates patience and compassion. -Exhibits traits of a responsible and attentive person. -Demonstrates strong organizational skills. -Possesses knowledge of proper childcare techniques and early childhood development theory. -Is capable of applying childhood development theory to everyday activities and curriculum. -Possesses strong listening skills. -Demonstrates ability to communicate effectively with young children. -Exhibits strong leadership skills. -Is able to think and act quickly in a crisis. -Possesses knowledge of basic first aid and emergency procedures. -Demonstrates strong problem-solving skills. -Exhibits ability to think creatively and innovatively when designing activities. -Demonstrates strong interpersonal skills. -Possesses physical and mental stamina required to oversee large numbers of young children on a daily basis. Must be a team player, hard worker, love children, very flexible, trustworthy, and have good work ethic. CPR/FIRST AID is a plus and a drivers License. If this is not you, please do not apply. Experience is highly preferred working as a caregiver in either a daycare or school setting with a clean background. If interested please feel free to apply. Serious inquiries only. Background checks will be performed on all applicants. Bilingual is a plus. Please copy and post your resume here for review.

Job Description Heavy Equipment Diesel Technician / Mechanic (Field & Shop) Are you an experienced and highly skilled Diesel Technician ready to tackle a diverse range of heavy construction equipment? If you have a strong work ethic, are enthusiastic about your craft, and thrive in both shop and field environments, this is the perfect opportunity for you. We pride ourselves on a positive work atmosphere where our equipment rental department collaborates closely to achieve daily tasks. This role offers the chance to grow your expertise while benefiting from comprehensive support and a rewarding work environment. What You'll Do: * Perform minor and major repairs on various makes and models of heavy construction equipment. * Conduct regular preventative maintenance (PM) and periodic maintenance to ensure equipment reliability. * Execute diagnostic tests on equipment, utilizing proprietary manufacturer communication software as needed. * Collaborate effectively with colleagues and management to accurately diagnose problems and plan efficient repairs. * Maintain accurate records of all repairs performed on vehicles and equipment. * Manage parts inventory and maintain cleanliness within the shop area. What We're Looking For: * 5+ years of proven experience as a Diesel Mechanic, specifically with heavy construction equipment. * In-depth knowledge of Heavy Equipment Hydraulics and Electrical systems, with strong troubleshooting capabilities. * Ability to diagnose issues using manufacturer software. * Capable of lifting up to 45 pounds. * Excellent reading and writing skills. * Proficiency in basic computer operations. * A valid Driver's License (CDL Class A is a plus). * Demonstrated strong work ethic and enthusiasm in the workplace. * Operates with the highest level of integrity, is humble, and follows directives. Benefits & What We Offer: * Competitive Pay commensurate with experience, plus Bonus Pay. * Comprehensive Benefits Package: Health, Dental, Vision, Life Insurance, Short-term, and Long-term Disability. * 401(k) with company match. * Paid Time Off (PTO). * Opportunities for training and paid ASE Certifications. * Company-provided uniforms and special tooling. * Assistance with moving your toolbox if needed. * A positive, team-oriented work environment. This role requires a blend of field and on-site work at our yard. If you're a skilled Diesel Technician seeking a supportive environment where your expertise is valued, we encourage you to apply!

Job Description Company Overview: If you love fast-paced ever changing world challenges, HTH is the right place for you to grow your career. Headquartered in Houston, Texas. HTH Communications is one of the fastest growing companies in the wireless industry. With roots in the refurbishment and distribution of mobile devices, over the past decade HTH has grown into a full-service logistics and services organization operating out of a new, state-of-the-art facility. HTH’s service offering includes device refurbishing and repair, handset sales, 4PL and MVNE services. HTH customers and partners include nationwide carriers, regional operators, MVNO’s, independent agents and equipment manufacturers. In addition, HTH also owns and operates FCC-licensed Eligible Telecommunication Carriers (ETCs) offering Lifeline and Prepaid wireless services to consumers in all 50 states under consumer brands: AirVoice Wireless, AirTalk Wireless, and TAG Mobile. Essential Duties and Responsibilities: • Ensures brand consistency and effective brand stories across marking materials and channels, • Developing and implementing organizational publicity strategies, including budgeting, timelines, etc., • Serve as company spokesperson at public-facing events and press conferences, • Craft, edit, and distribute press releases, • Establishes and maintains cooperative relationships with consumers, the community, employees, members of the media and public interest groups and responds to information requests, • Plans or directs the development of programs to maintain favorable public views of the organization’s agenda and accomplishments to uphold branding guidelines, • Analyzes the organization’s objectives, promotional policies, and needs to build public relations strategies that influence public opinion and promote products, ideas, and services, • Collaborate with managers to identify trends and evaluate advertising to determine whether it is in sync with the organization’s public relation efforts, • Serve as project manager to determine the type of advertising and marketing content, such as TV, radio, print, digital or social media, that needs to be created and distributed, • Manage a calendar scheduling the creation of each piece of content and the planned release of each piece of content, • Work with in-house or external Writers and other content creators to create the desired content, • Bachelor’s degree in public relations, journalism, communications, marketing, advertising, or another related field, • 5+ years of PR experience, • Experience networking and building relationships with the press, • Aptitude for strategic problem-solving, • Ability to diffuse tense situations and stay calm in a crisis, • Strong editorial and marketing skills, • Excellent organizational skills, • Excellent oral and written communication skills, • Analytical mind and problem-solving skills, • Strong project management skills, • Excellent attention to detail, • Able to excel in a deadline-driven environment Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance

Job Description Polk Mechanical Company is a trusted leader in the commercial and industrial mechanical contracting industry. Our reputation for exceptional service, technical expertise, and innovative solutions has fueled impressive growth across Texas and the Gulf Coast. As we continue to expand, we are seeking skilled professionals who are passionate about their craft and committed to excellence. Position Overview We are currently seeking an experienced construction Journeyman Plumber. This role involves the installation, modification, and repair of a wide range of plumbing systems in commercial environments. Per diem is provided for travel-related expenses. Key Responsibilities • Install, modify, and repair utility, supply, and disposal systems, • Work with systems including:, • Sewage, water, gas, and oil lines, • Compressed air, vacuum, and acid systems, • Fixtures and equipment such as water closets, water heaters, hydrants, valves, and pumps, • Read and interpret blueprints to lay out plumbing systems for underground rough-in and top-out phases, • Install DWV (Drain, Waste, Vent), domestic water piping (hot and cold), and acid waste systems, • Install natural gas and medical gas systems (vacuum, O₂, medical air, nitrogen), • Set plumbing fixtures for commercial buildings and healthcare facilities, • Perform soldering, brazing, threading of steel pipe, and use of Pro Press, • Conduct pressure testing and leak detection procedures, • Cut openings in structures using hand and power tools, • Install underground storm, sanitary, and water piping systemsQualifications, • Minimum 4 years of experience in commercial plumbing, • Completion of a recognized plumbing apprenticeship program, • Valid state plumbing license or eligibility to sit for the Texas exam, • Prior experience in HVAC/mechanical systems in a commercial setting, • Ability to read and interpret blueprints and plumbing codes, • Strong attention to detail and ability to meet deadlinesBenefits, • Paid vacation and holidays, • Medical, dental, and vision insurance, • 401(k) with company match, • Life and disability insurance, • Career advancement and training opportunities, • Per diem for travel assignments

Job Description THE ROLE We are looking for an OD/ID Grinder - 2nd Shift to join our team. The OD/ID Grinder - 2nd Shift will work with the coatings team and utilize a variety of grinding machines to prep and finish components to required customer and internal specifications. This role requires precision, mechanical aptitude, and the ability to interpret technical drawings and use measuring instruments. The ideal candidate will be experienced in grinding and/or machining, safety-conscious, and detail-oriented. ORGANIZATIONAL - Leadership & Organization • Strong attention to detail and commitment to producing high-quality work., • Good communication skills and ability to work both independently and in a team setting., • Adaptability to changing workloads and priorities., • Operate manual grinding machines to remove carbide, chrome, and steel coatings using rough and finish grinding techniques to tight tolerances (up to 0.0005")., • Read and interpret charts, drawings, blueprints, and scope of work documentation., • Determine product specifications and calculate dimensions and tolerances using mathematical skills and measuring instruments., • Use precision instruments including micrometers, calipers, and preset gauges to measure, examine, and test finished components., • Determine and monitor machine feed and speed and select abrasives appropriate to the material and desired finish., • Observe machinery operation and diagnose machine malfunctions; perform adjustments or notify maintenance as needed., • Lift, hoist, and position workpieces using cranes and other tools to safely load and unload machines. The above list of activities is not all inclusive but a general representation of the requirements of an RMS OD/ID Grinder. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • Manual grinding experience in a fast-paced repair or machining environment strongly preferred., • This position will be based full-time in our Houston, TX Fusion facility., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • Must be able to use hands for assembly and tool usage., • While performing the duties of this position the employee will be required to stand, sit, bend and walk for significant portions of the shift, • Must not have allergies or issues related to handling metals including aluminum, copper, bronze, and steel., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Authorized to work in the United States. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description JOB SUMMARY Rotating Machinery Services, Inc. is seeking qualified Rotating Equipment Mechanics to work 2nd shift (3:00pm to 11:00pm) that will perform a variety of mechanical operations / tasks on turbomachinery components and assemblies to ensure compliance with specifications and quality requirements. This position requires experience working on pumps, gearboxes, compressors, and Blowers. The requirements below are the minimum requirements an employee needs to fulfill this position. They are representative of the knowledge, skills and ability required for the position. JOB REQUIREMENTS AND QUALIFICATIONS • Unit disassembly, cleaning, and inspection including the accurate collection and recording of technical inspection data for equipment repair proposals., • Maintain, diagnose, and repair all types of rotating equipment., • Complete required maintenance to return equipment back to customer operating condition, per OEM specifications., • Prepare and complete service documentation., • Maintaining clear and concise daily work records. Use of basic problem-solving skills in terms of gathering facts, analyzing the cause, and selecting the best most accurate solution., • Maintenance of shop equipment and regular daily shop housekeeping to ensure an organized and safe working environment., • Responsible for understanding and complying with the safety policy, procedures, and instructions., • Disassemble complex rotating equipment and provide written observations of failure modes and condition of “as received” parts., • Assist in cleaning and prepping parts for NDT and PMI examination., • Perform and document detailed dimensional and runout inspection of all components., • Provide written inspection report, to include recommended repairs, and replacement parts needed., • Provide written instructions and drawings to other crafts involved in manufacture or repair of components., • Perform quality checks on customer furnished, manufactured, and repaired components prior to final assembly., • Clean and prep parts for final assembly., • Assemble equipment complete per OEM, ASME, API, or customer supplied specification., • Document all final sizes, clearances, and documentation to provide customer with a final repair report., • Complete “as received” photo documentation and visual inspection of assemblies and customer furnished spare parts., • NCCER Millwright certification helpful., • Must be a team player and be willing to train junior Mechanics., • This position requires good attendance and punctuality., • Communicate with supervision, crafts, and customers during the inspection and repair process., • Good organization skills., • Knowledge and use of all types of measuring devices ad rotating equipment., • High School Diploma/GED from an accredited school., • NCCER Millwright certification helpful., • The position will be based full time in our Houston, Texas offices., • This is a full-time position, with a minimum expectation of 40+ hours per week. Additional hours, including evenings or weekends maybe required based on business need., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Able to understand, read, write, and speak English., • Must possess a valid driver’s license., • Must be able to legally work in the US and provide proper documentation., • Able to pass a pre-employment drug, alcohol test and background check., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance., • Ability to walk, climb, reach above head, and balance., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50lbs. with assistance, walk, climb, reach above head, and balance., • Must be able to use hands for assembly and tool usage., • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs, • Tool, Shoe, and Safety Glasses reimbursement ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionSkip the line and apply on our website: ➡️ Apply NowAbout Us TeachMe.To is the leading peer-to-peer lessons marketplace, on a mission to connect independent Volleyball coaches in Houston with aspiring players. As a fast-growing destination for Volleyball coach jobs and empower talented professionals to share their passion for the sport. With thousands of coaches and over 2 million students visitng our marketplace, we invite you to join a movement that's shaping the future of Volleyball instruction. Role Overview We are seeking skilled and dedicated Volleyball Instructors in Houston to join our dynamic platform. Whether you're a seasoned Volleyball coach or new to the Volleyball teacher profession, our flexible model allows you to set your own schedule, define your rates, and work with enthusiastic students ready to improve their performance. Responsibilities • Customized Volleyball Coaching: Deliver personalized training that meets each student's unique needs., • Skill Development: Craft lesson plans and training regimens that enhance Volleyball techniques, understanding, and confidence., • Positive Learning Environment: Foster a supportive atmosphere that encourages growth, enjoyment, and success in the sport., • Innovative Teaching Strategies: Use effective coaching methods and creative drills to ensure consistent progress, satisfaction, and retention.Requirements, • Previous experience in Volleyball coach jobs, Volleyball instructor jobs, or similar Volleyball teacher roles., • A true passion for Volleyball and a strong desire to inspire others., • Excellent communication skills to engage, motivate, and effectively teach students of all levels.Benefits, • Autonomy and Flexibility: Set your own schedule and prices, allowing you to reflect your expertise and availability., • Dynamic Student Base: Get immediate access to eager learners nationwide, expanding your reach., • Zero Hassle: We handle scheduling, payments, and marketing, so you can focus on delivering top-notch Volleyball instruction.

Job Description Allied Interior Solutions (a division of Allied Stone, Inc.) is the industry’s choice for Multifamily and Single Family cabinets and countertops. From design to completion, we provide superior service, support, and turnkey solutions. Based in Desoto, Texas, all AIS cabinet products are 100% manufactured in the U.S.A. Using state-of-the-art and real-time cloud-based equipment, provides the highest efficiency to complete your order with shorter lead times. With a team of trendsetting designers, skilled craftsman, and cutting-edge technology, we create a seamless client experience that results in unrivaled finished spaces. Due to incredible growth, AIS is seeking a Field Service Manager for the Houston, Texas area. The Field Service Manager is responsible for coordinating all aspects of the installation of Single-family projects. **This position will be working out of the Houston Area. Job Responsibilities: • Coordinate delivery and installation with clients., • Approve and submit subcontractor invoices/draws for payment., • Maintain competent installers and ensure paperwork work is complete and timely., • Anticipate and resolve client issues., • Attend client mandated meeting as required., • Maintain strong relationships with the client and all departments in AIS., • Commit to being highly visible on job sites. What does it take to be successful? • Having a strong understanding of carpentry, building, and contracting, • Being self-motivated, with strong communication and problem-solving skills, • Possess organizational skills for multiple projects at once., • Being a self-starter, flexible and able to follow processes., • Possess a collaborative spirit while being, honest, adaptable, creative., • Prioritize clients and represent AIS with pride & integrity., • Communicate efficiently among all departments and meet deadlines. Requirements and Qualifications: • High school diploma or GED equivalent, • 3 years of construction experience, • Previous construction management experience, • Proficient in Microsoft Office, Project Management, and Planning, • Ability to work autonomously without direct supervision., • Valid Driver’s License, • Reliable transportation, • Ability to work remotely and travel to work sites as needed. We take great pride in our collaborative team environment. As a company, we emphasize building upon a strong foundation where our people can continually develop and make a difference. At Allied Stone, we know employees elevate our company with their ingenuity, charisma, and honest work ethic. When our employees are passionate about their craft it shows in their work by inspiring opportunities and strengthening customer relationships.

Job Description About Us! Founded in 2002, Raptor has partnered with more than 60,000 schools in 55 different countries, including 5,300+ K-12 US school districts, to provide integrated visitor, volunteer, attendance, dismissal, emergency management, and safeguarding software and services covering the complete spectrum of school and student safety. We are passionate about our mission to protect every child, every school, every day! About the Role Raptor is looking for a Senior Product Designer to support our growing team as we evolve and expand our K–12 safety and school operations platform. You'll work across several high-impact products, including StudentSafe, VisitorSafe, Emergency Management, and SmartPass, used by over 60,000 schools nationwide. You'll be responsible for leading design efforts across 1–2 product areas at a time—diving deep into user needs, shaping product direction, and driving end-to-end execution. We're looking for a senior designer who can bring strong systems thinking, product intuition, and visual craft + someone who's equally comfortable generating ideas from scratch and pushing existing designs to a higher bar. What You'll Work On • Student & staff safety tools – Design features across products like StudentSafe, VisitorSafe, and Emergency Management that help schools respond quickly and manage everyday safety needs., • Product leadership – Drive the design process for your features (from research to specs to QA), partnering closely with PMs and engineers to ship great work., • Design systems & consistency – Work within and evolve our shared design system to ensure quality and consistency across the platform., • Multiple workstreams – Operate autonomously across multiple initiatives, bringing structure, clarity, and momentum to your work.What We're Looking For, • 6+ years of experience designing digital products, preferably in SaaS, enterprise, or multi-user systems., • A strong track record of owning and shipping product features end-to-end—across research, strategy, wireframes, specs, and final polish., • Excellent interaction and UX design skills—able to simplify complex problems and edge cases for diverse user roles., • Strong visual and UI craft, with attention to detail and consistency., • Experience working within and contributing to a design system., • Strong communication skills—you can articulate your thinking clearly, write design specs, and navigate trade-offs in cross-functional discussions., • Able to work independently, manage your time across multiple workstreams, and lead small to medium-sized projects without much oversight., • Bonus: experience working in education, safety, or other complex, real-world systems.Why you might be excited about us, • Design products that directly impact student safety and day-to-day school operations., • Work on a platform used by millions of students and staff across 60,000+ schools., • Work on meaningful products that improve student safety and school operations., • Collaborate with an awesome, high-craft design team that values quality and creativity., • Gain experience working on products at all stages of maturity, from early 0→1 initiatives to established flagship products with over a decade of evolution., • Play a key role in elevating design quality across multiple tools in the K-12 space., • Best-in-class benefits, including: Flexible Paid Time off, Paid parental leave, 11 Paid holidays per year, workplace flexibility, Affordable health coverage (medical, dental, vision), 401(k) employer contribution to help you plan for the future, Company paid life insurance/STD/LTD, pet insurance, and more.Why you might not be excited about us, • Things are messy (in a good way). Raptor is a 400+ person company made up of 6 and counting acquisitions—and bringing all our products together into a single safety suite. We've made great progress (shared login, unified navigation, a cross-product design system), but there's still a lot of cleanup and stitching to do., • Not everything feels modern (yet). Some of our tools have been around for a while and weren't designed with today's design standards in mind. They're functional and trusted by schools—but there's plenty of room to improve the experience, bring consistency, and raise the bar., • We're not a hype-y AI company. We're absolutely leaning into AI where it makes sense—things like visualization of student behavior patterns across a school, district or state or reducing admin overhead—but we're not building generative playgrounds. Our focus is on solving urgent, unsexy problems that schools desperately need help with., • We're still scrappy. Our eng/product/design org is ~130 people, and design is a team of 7. You'll do research, push pixels, write specs, and shape product alongside your PM and engineers. If you're looking for heavy layers of process or lots of design-only time, this might not be the right fit. If you are a resident of California, Colorado, New Jersey, New York or Washington, please reach out to for a reasonable estimate of annual base compensation and any eligible incentive compensation. The actual compensation offered to successful candidates for roles may be higher or lower, based on non-discriminatory criteria including but not limited to relevant professional experience, geographic location, knowledge, skills, and abilities. This range will be reviewed on a regular basis. Raptor Technologies is an Equal Opportunity Employer, providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, veteran status, or any other characteristic protected by applicable federal, state, or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, compensation, training, promotion, transfer, leaves of absence, and termination.

Job Description Location: Drayton, North Dakota DL Jones Construction is looking for Journeyman level Pipe Fitter’s for a project located in Wahpeton, North Dakota. $28 - $34 / hr + $125 / day Per Diem Requirements: • Minimum 3 years progressive experience in the role Position Summary: The Pipefitter is responsible for fabrication, assembly, installation and maintenance of piping, piping systems and piping supports, as well as the equipment for industrial piping systems based on knowledge of system operation and study of building plans or working drawings. All work is conducted in compliance with applicable laws and regulations, and in alignment with company goals and strategies. Essential Job Functions: • Assembles component layout by applying knowledge of geometry, physical metal properties and weld shrinkage, • Performs basic mathematical calculations pertaining to the craft such as rolling offsets, cutback of fittings, and takeout between welds and other fits, • Select type and size of pipe and related materials according to job specifications, • Plan the sequence of installation to avoid obstructions and activities of other construction workers, • Prep material for welding by cutting or grinding using porta-band, pipe cutters, hammer, and chisel, cutting torch, and/or grinder, • Thread pipe using threading machine, • Secure pipes to structure with bolt up, clamps, brackets, tack welding and hangars using hand tools and machines, • Test piping system for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks, • Compare and recognize differences in the size, shape and form of lines, figures, and objects, • Reads and understands plans, isometrics, arrangement drawings, details, specifications, erection manuals and/or blueprints and make decisions based on measurable criteria, • Visualizes objects in three dimensions from plans and drawings, • Work within precise limits and ASNI and ASME standards of accuracy, • Attends training sessions, seminars and appropriate educational classes required by department., • Knowledge of geometry and physical metal properties, • Ability to do material takeoffs, figure offsets, takeoff of fittings, and rigging, • Knowledge of ANSI and ASME standards for Pipes and Fittings, • Ability to read and understand plans, isometrics, drawings, specification and/or blueprints, • Basic understanding of rigging to move pipe into proper location, • Ability to read maps, and navigate to remote locations, • Ability to plan and organize within a work schedule, • Possess good communication skills, both oral and written, • Ability and willingness to work in all weather conditions The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the incumbent is regularly required to see, talk and hear., • This position will require one to frequently sit, stand, walk, reach with arms and hands, work at heights without fear, climb or balance, and to stoop, kneel, or crouch., • This position will one to occasionally lift and/or move up to 80 pounds., • The noise level in the work environment is usually loud and may require use of ear plugs on occasion. #hc116035

Job DescriptionSkip the line and apply on our website: About Us TeachMe.To is the leading peer-to-peer lessons marketplace, on a mission to connect independent Soccer coaches in Houston | TeachMe.To with aspiring players. As a fast-growing destination for Soccer coach jobs and empower talented professionals to share their passion for the sport. With thousands of coaches and over 2 million students visitng our marketplace, we invite you to join a movement that's shaping the future of Soccer instruction. Sign up today on TeachMe.To! Google search for 'teachmeto apply' or click the button. Role Overview We are seeking skilled and dedicated Soccer Instructors in Houston | TeachMe.To to join our dynamic platform. Whether you're a seasoned Soccer coach or new to the Soccer teacher profession, our flexible model allows you to set your own schedule, define your rates, and work with enthusiastic students ready to improve their performance. Responsibilities • Customized Soccer Coaching: Deliver personalized training that meets each student's unique needs., • Skill Development: Craft lesson plans and training regimens that enhance Soccer techniques, understanding, and confidence., • Positive Learning Environment: Foster a supportive atmosphere that encourages growth, enjoyment, and success in the sport., • Innovative Teaching Strategies: Use effective coaching methods and creative drills to ensure consistent progress, satisfaction, and retention.Requirements, • Previous experience in Soccer coach jobs, Soccer instructor jobs, or similar Soccer teacher roles., • A true passion for Soccer and a strong desire to inspire others., • Excellent communication skills to engage, motivate, and effectively teach students of all levels.Benefits, • Autonomy and Flexibility: Set your own schedule and prices, allowing you to reflect your expertise and availability., • Dynamic Student Base: Get immediate access to eager learners nationwide, expanding your reach., • Zero Hassle: We handle scheduling, payments, and marketing, so you can focus on delivering top-notch Soccer instruction. Apply today:

Job DescriptionSalary: DOE The Patient Marketing Manager for our Clinical Research Site Network will play a crucial role in designing and executing innovative marketing strategies aimed at enhancing patient engagement and recruitment. This position is responsible for crafting compelling narratives that highlight the benefits of clinical trials and fostering a patient-centric approach throughout the network. By leveraging data-driven insights and creative marketing techniques, the Manager will ensure the clinical research sites are positioned as trusted and attractive options for potential participants. Key Responsibilities • Strategic Planning: Support the development and implementation of comprehensive marketing plans that align with the organizations objectives to increase patient recruitment and retention across all clinical research sites., • Campaign Management: Assist in the creation and execution of multi-channel marketing campaigns, including digital, print, and social media, to effectively reach and engage target patient demographics., • Brand Development: Contribute to enhancing the networks brand visibility and reputation as a leader in patient-centered clinical research by helping craft and convey consistent, clear, and compelling messaging., • Collaboration and Partnership: Work closely with cross-functional teams, including clinical operations, data analytics, and external partners, to ensure seamless integration of marketing efforts and alignment with clinical needs., • Market Research and Analysis: Utilize market research and data analytics to understand patient behaviors, preferences, and barriers to participation, adapting strategies accordingly to maximize impact., • Patient Engagement Initiatives: Support the development and oversight of innovative patient engagement initiatives, including educational materials, webinars, and community outreach programs, to build trust and awareness., • Performance Metrics and Reporting: Assist in establishing and monitoring key performance indicators (KPIs) to evaluate the effectiveness of marketing strategies, providing regular reports and insights to senior leadership. Key Criteria • Educational Background: Bachelors degree in Marketing, Communications, Healthcare Management, or a related field., • Experience: Minimum of 5-7 years of experience in marketing, with at least 2-3 years in the healthcare or clinical research industry., • Leadership Skills: Ability to support and contribute to a high-performing marketing team, fostering a culture of innovation and accountability., • Analytical Skills: Proficiency in analyzing complex data sets to derive actionable insights and drive strategic decision-making., • Communication Skills: Strong written and verbal communication skills, with the ability to craft compelling narratives and deliver impactful presentations., • Digital Marketing Expertise: Knowledge of digital marketing tools and platforms, with a track record of successful digital campaign execution., • Patient-Centric Focus: Demonstrated commitment to understanding and addressing the needs and motivations of clinical trial participants., • Project Management: Excellent organizational skills with the ability to manage multiple projects simultaneously, ensuring timely delivery and alignment with strategic goals. This position offers the opportunity to make a significant impact in the field of clinical research by shaping the way patient marketing is approached and executed. If you are a strategic thinker with a passion for healthcare innovation and patient engagement, we invite you to apply for this rewarding role. remote work

Job DescriptionJOB SUMMARY Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified CNC Machinist to work 2nd shift (3pm to 11pm) and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. on rotating equipment components (pumps, turbines, compressors, and more) and assemblies to ensure compliance with specifications and quality requirements. JOB REQUIREMENTS AND QUALIFICATIONS • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting., • Ability and willingness to work around and use large propane / acetylene., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of machinist. Education: • OMEGA experience, • Proficient in running horizontal lathes, milling machines, VTL, and Bullard., • Capable of reading drawings and proper use of calibrated measuring tools., • Read drawings and use of micrometers., • Basic machining knowledge and practices required., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. The position will be based full time in our Pearland Works facility (77047). Physical Requirements: • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts in a machine-shop environment. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs, • Employee Reimbursement Programs, • Tool, Shoe, and Safety Glasses reimbursement ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionAbout OptiSigns OptiSigns is a Houston-based B2B SaaS company that helps more than 22,000 businesses engage customers and employees through intuitive digital-screen solutions. We believe great software should feel effortless—even to non-technical users—and that thoughtful design is as critical as solid engineering. Why this role exists We’re expanding our product line and need a craft-obsessed engineer who can own the entire front-end experience—from Figma designs to pixel-perfect production code. If you love sweating the details of typography and motion and thrive in a codebase, you’ll fit right in. What you’ll do 40% – Design delightful UIs in Figma: information architecture, low- to hi-fi mock-ups, interactive prototypes, component libraries, accessibility states, and responsive breakpoints. 40% – Build the designs using modern HTML, semantic CSS/SCSS (or Tailwind), TypeScript, and React (Next.js) or Angular. Maintain a clean, reusable component system. 10% – User-test & iterate: run quick usability tests, interpret analytics/heatmaps, and turn findings into improvements. 10% – Collaborate & ship: work with product managers, full-stack/backend engineers, and QA to deliver features end-to-end, review PRs, and improve our DX tooling (Storybook, ESLint, Husky, etc.). Requirements What you bring • 0–3 years building customer-facing web apps (portfolio or live products required)., • Mastery of Figma (auto-layout, variants, design tokens, FigJam)., • Production experience with React or Angular, modern TypeScript, and component architectures., • Deep understanding of HTML semantics, CSS layouts (Flexbox / Grid), responsive design, accessibility (WCAG 2.2), and performance optimizations., • Familiarity with design systems (Material, Ant, Radix, or your own), animation libraries (Framer Motion, GSAP), and testing (Jest, Testing Library, Cypress)., • Comfort working in an Agile, CI/CD environment (GitLab CI/CD, Vercel/AWS)., • A user-centric mindset—ability to translate business goals into intuitive flows and elegant interactions., • Excellent written & verbal communication. Bonus points, • Experience with data-heavy dashboards or B2B SaaS UX., • Knowledge of Node.js, • Medical, dental, and vision insurance, • Flexible schedule & remote-friendly culture (Houston HQ for those who prefer in-office), • Generous PTO & paid holidays, • 401(k) with match (coming 2025), • Monthly learning stipend (courses, conferences, books), • Latest MacBook Pro / dev setup of your choice We review every application personally and respond within a week. Ready to craft experiences that thousands of businesses use every day? Apply now and let’s build something beautiful together.

Job Description Why Jerry.ai? * Join a pre-IPO startup with capital, traction, and a massive runway ($240M funded | 60X revenue growth in 5 years | $2T market size) * Collaborate with brilliant minds from companies like Uber, Amazon, Microsoft, Nvidia, Linkedin, Klarna, and Lemonade, along with world-class product designers and researchers, all with a shared obsession for customer experience. * Immerse yourself in a talent-dense environment where you'll greatly accelerate your learning and career growth * Propel us from 5M to 50M customers in the next few years About The Opportunity: Own how Jerry reimagines auto repair and maintenance — a space ready for a clearer, more trusted experience. Are you a curious and data-driven Sr. Product Manager with deep customer empathy and strong UI/UX instincts, ready to own a critical piece of our mission to radically simplify car ownership? If so, you’ll be joining a company that’s already proven its momentum and is only just getting started. In 6 years, we’ve amassed 5M customers and are building toward a 10x expansion over the next few years. As a Sr. Product Manager on our GarageGuard team, you won't just be optimizing flows, you'll bring consumer-grade clarity and guidance to moments that matter: when an engine light turns on, an unexpected noise appears, or maintenance is due. You’ll shape how drivers discover, diagnose, and resolve car issues through GarageGuard, including experiences like diagnostics, recall & maintenance alerts, shop finder, repair estimates, car value, and a digital glovebox. You'll partner closely with exceptional product managers, engineers, data scientists, and designers/researchers to solve tangible problems and build features that are truly impactful. You will have a direct and significant impact on how people feel about caring for their cars — and on our path to becoming a $10B business. How You Will Make an Impact: * Drive measurable gains in engagement and user onboards across GarageGuard’s core offerings by crafting friction-free, polished experiences. * Ship 0→1 features to modernize auto care for the average driver. * Uncover key opportunities to increase trust through deep-dive analyses and a first-principles understanding of user behavior. * Thoughtfully employ the latest AI technology to make GarageGuard faster, clearer, and more helpful. * Map end-to-end journeys (from symptom triage to booking a shop) to identify moments of confusion, anxiety, or drop-off. * Conduct insightful user research (qual + quant), rapidly prototype with Design, and translate findings into elegant, shippable solutions; validate with A/B tests and usability studies. * Set a high UX quality bar (clarity, speed, consistency) and partner with Engineering and Design to instrument, measure, and iterate. Who You Are: * Proven consumer product manager: You’ve spent 5+ years in consumer tech delivering meaningful impact, with experience partnering closely with Product Design/Research and shipping consumer-grade polish on mobile or web. * Creative problem-solver: You thrive on ambiguity and aren't afraid to tackle challenges head-on with innovative solutions. * Tenacious: You possess a strong sense of ownership and drive, thriving in a fast-paced, high-stakes environment. * Customer-obsessed with product taste: You demonstrate strong empathy for consumer needs and a refined sense for UI/UX craft. * Data-driven, with conviction: You're deeply analytical and live in the data, yet you're decisive and can make informed decisions even with limited information. * Super organized, execution-focused: You can manage complex projects, collaborate with diverse teams, and consistently deliver results. * Detail-oriented and quality-minded: You pay attention to the little things, from how errors are handled to clarity in communication, accessibility, and edge cases, and you don’t move on without making sure the work is well-supported and measurable. Preferred Experience: * Comfortable with rigorous analyses, developing insightful hypotheses, and validating their impact on key metrics. * Bonus points if you've navigated the exciting (and sometimes chaotic) world of a startup. While we appreciate your interest and application, only applicants under consideration will be contacted. Jerry.ai is proud to be an Equal Employment Opportunity employer. We prohibit discrimination based on race, religion, color, national origin, sex, pregnancy, reproductive health decisions or related medical conditions, sexual orientation, gender identity, gender expression, age, veteran status, disability, genetic information, or other characteristics protected by applicable local, state or federal laws. Jerry.ai is committed to providing reasonable accommodations for individuals with disabilities in our job application process. If you need assistance or an accommodation due to a disability, please contact us at The successful candidate’s starting pay will fall within the pay range listed on this job posting, determined based on job-related factors including, but not limited to, skills, experience, qualifications, work location, and market conditions. Ranges are market-dependent and may be modified in the future. In addition to base salary, the compensation may include opportunities for equity grants. We offer a comprehensive benefits package to regular employees, including health, dental, and vision coverage, paid time off, paid parental leave, 401(K) plan with employer matching, and wellness benefits, among others. Equity opportunities may also be part of your total rewards package. Part-time, contract, or freelance roles may not be eligible for certain benefits. About Jerry.ai: Jerry.ai is America’s first and only super app to radically simplify car ownership. We are redefining how people manage owning a car, one of their most expensive and time-consuming assets. Backed by artificial intelligence and machine learning, Jerry.ai simplifies and automates owning and maintaining a car while providing personalized services for all car owners' needs. We spend every day innovating and improving our AI-powered app to provide the best possible experience for our customers. From car insurance and financing to maintenance and safety, Jerry.ai does it all. We are the #1 rated and most downloaded app in our category with a 4.7 star rating in the App Store. We have more than 5 million customers — and we’re just getting started. Jerry.ai was founded in 2017 by serial entrepreneurs and has raised more than $240 million in financing. Join our team and work with passionate, curious and egoless people who love solving real-world problems. Help us build a revolutionary product that’s disrupting a massive market. Compensation Range: $150K - $185K

Job DescriptionAbout vCluster Labs We are a venture-backed tech startup striving to be the leading force in enabling platform engineers. We raised +$30M from top-tier VCs such as Khosla Ventures (first investor in OpenAI, GitLab, Stripe, Doordash) and are in a hyper-growth phase looking for motivated people to complement our team. Our headquarters are in San Francisco (Salesforce Tower), but our team is distributed around the globe and we have a remote-first work culture. We're the company behind vCluster, an open-source technology for virtualizing Kubernetes (+10k GitHub stars). Open source is part of our DNA. The adoption of our commercial product based on vCluster has grown extremely fast (multi-million dollar revenue) and our customer base includes some of the biggest companies in the world, including 6 Global Fortune 500 companies as well as some of the fastest-growing tech unicorns. Responsibilities * Own the Product End-to-End: You’re responsible for the full product lifecycle—from triaging ideas, writing specs and prioritizing the roadmap to final release sign-off after QA. * Talk to Users & Observe Support/Slack Interactions: You’ll regularly connect with platform engineers, DevOps teams, and developers using our open-source and commercial offerings to deeply understand use cases and user journeys to understand current challenges and future opportunities. * Dig into the Details: You don’t just define the “what”—you get into the “how.” You obsess over usability, edge cases, performance, configuration specs, CLI commands, CRDs/YAML, and docs. * Collaboration Across Functions: Work closely with engineering, design, marketing and sales to publish release notes, iterate over documentation, improve customer onboarding, and create other customer-facing assets. * Set Direction, Fast: This isn’t a role for a committee. You’ll synthesize feedback, weigh tradeoffs, make hard calls quickly, and move fast to get things shipped and adopted. * Course-Correct Quickly As Needed: You know that with new information and changes in the ecosystem and technology, startups need to adapt quickly and you're not afraid to revise a decision and lay out why a change in direction is necessary. Everyone talking to you understands your direction at all times and gets excited about working toward a common goal. * Drive Open Source and Commercial Success: Help define the balance between open-core features and paid product functionality, working with the founders and GTM leadership to drive maximum OSS traction without sacrificing the commercial success of the company. Requirements * Live and Breathe Kubernetes: You understand the space inside out—relevant OSS technologies, multi-tenancy, RBAC, CRDs and controllers, networking, etcd, etc.—and can talk deeply with platform teams. * Have Built Infra Tools Before: You know more than just SaaS. You’ve shipped self-hosted, enterprise-grade products used in private cloud and potentially even air-gapped environments. * Understand OSS Communities: You know what motivates and what turns off open source users and understand the tensions open source companies experience in their journey. * Think Like a Startup Founder: You take ownership, cut through ambiguity, and push things over the finish line. You care about the impact, not the org chart. * Love the Craft of Product: You sweat the UX of the UI as much as the UX of the CLI and the underlying YAML specs. You deeply care about the readability of documentation, the user flows and the onboarding experience for new admins and end-users alike. * Thrive in a High-Speed, Low-Structure Environment: You don’t need layers of process. You like solving messy problems, prototyping, launching, and iterating quickly. * Are Relentlessly Curious: You ask why five times. You explore alternatives. You challenge assumptions. You want to understand how things work at every level of the stack. Bonus Points * Experience scaling the usage of open source products. * Experience with Linear for project management. * Experience with GitHub, Notion, and Slack. * Willingness to travel 3-5 times per year in the US and Europe. Benefits We offer the following benefits: * Competitive Salary: We offer a competitive compensation package, including equity. * Platinum-Level Insurance: Health, dental, vision, and life Insurance, including plans for you and eligible dependents (benefits vary depending on country). * Flexible Working Schedule: You have a doctor’s appointment or need to head to the supermarket to get groceries at 2pm? We won’t have an issue with that. To us, results matter more than clocking in and out at the same time every day. * Workplace Flexibility: We’re very flexible about where you work. We know things can change in life and we’re happy to adjust the work environment for you along the way. Why join a startup like vCluster Labs? Since we are a fast-moving startup, you will not be number 14,589 in our company but rather become an essential part of our team right from the start: * Fast Application Process: We will typically get back to you within a week. No need to polish your resume for us. Just send us some links (e.g. LinkedIn, etc.), answer a few questions about your previous experiences, and hop on a quick Zoom call with one of our team members to see if you’re a good fit. We will respond quickly and make hiring decisions within days rather than months. * Open-Minded Work Environment: You can always speak your mind - no company politics or unnecessary formalities. We are operating in a lean, honest, and efficient way and we are looking for different perspectives, constructive feedback and creative, motivated people who want to make a difference. * Grow With The Company: We are a small company right now but we are growing incredibly fast because we work on something that has a lot of value to engineering teams in large enterprises. Joining vCluster Labs early will give you the chance to advance much faster to the next step on the career ladder than in any larger company. * Responsibility From Day 1: You will see right from the start that your work will immediately have an impact in our company and you can shape the future of this company together with the rest of our team. Grow with us and benefit from being part of this journey from the start. Culture & Values At vCluster Labs, we value and stand for: * Technical Excellence: We are determined to build best-in-class technology and ship high-quality software because we know that our users are engineers themselves. * Customer Obsession: We are going above and beyond to make our customers and users happy, which means striving for great usability, excellent documentation and support as well as fast response times for feature requests and bug reports. * Impressive Speed: From user feedback to shipping a new feature to address this feedback, we usually take less than a week in most cases and our users absolutely love us for this. * Bold Innovation: We are constantly questioning the state-of-the-art to find and address important issues in our space, even if that means abandoning any existing technologies and starting from scratch again. * Open Source & Open Mind: We are actively contributing and maintaining open-source projects and we believe that building an open-minded team culture that respects different perspectives and welcomes constructive feedback is equally paramount to our success. vCluster Labs provides equal opportunities for all candidates. We celebrate diversity and are committed to creating an inclusive work environment for everyone who becomes part of our team. We are also actively promoting measures to reduce bias throughout our hiring process to ensure that everyone gets the same opportunities. Compensation Range: $200K - $260K

Job Description JOB TITLE: Capture and Proposal Manager DEPARTMENT: Corporate REPORTS TO: COO of Quivera Enterprises, LLC LOCATION: Remote ABOUT THE COMPANY: Quivera Enterprises, LLC is a government-contracting parent corporation with a diverse portfolio of subsidiaries operating across various sectors. Our corporate office supports these subsidiaries through a shared service model, providing centralized back-office functions, including human resources, finance, and IT, ensuring consistency and efficiency across the organization. We are committed to excellence, innovation, and compliance in all our operations. POSITION SUMMARY: Quivera Enterprises LLC, a leading government contracting holding company, is seeking a seasoned Capture and Proposal Manager with at least 5 years of experience managing multi-volume, complex proposals for federal agencies. The ideal candidate will have extensive experience in federal capture and proposal management and be adept at writing content, managing proposal development, and ensuring compliance with all federal regulations. This role will involve the end-to-end management of the capture and proposal process, ensuring compliance, accuracy, and timely delivery. The successful candidate will collaborate with subject matter experts (SMEs), technical staff, and external resources to craft compelling, compliant, and winning proposals. KEY RESPONSIBILITIES: Proposal Development and Writing: Manage the full life cycle of proposals, from Capture and/or RFP analysis to final submission and award. Assist in developing and maintaining a win strategy throughout the proposal process, producing compelling and competitive documents. • Write, edit, and proofread proposals for clarity, accuracy, flow, and alignment with company standards and guidelines., • Develop compliance matrices, outlines, and proposal templates to ensure adherence to solicitation requirements., • Collaborate with SMEs and other departments to gather technical input and integrate them into the proposal narrative. Maintain a high-level understanding of company products and services to add value in proposal development., • Respond to and review RFPs, ensuring all submissions are error-free and compliant, including grammar, spelling, and RFP compliance with federal regulations and guidelines (e.g., FAR, DFARS)., • Coordinate with various teams to guarantee that every aspect of the proposal meets the specific requirements and standards of the opportunity, ensuring compliance and alignment with the solicitation guidelines., • Ensure that all proposals meet the highest standards of quality and comply with all relevant regulations and requirements., • Monitors’ proposal status responds to any inquiries from the government and prepares for potential follow-up activities such as oral presentations or negotiations., • Compellingly convey Quivera’s solutions and skill sets in narrative format and through graphical / technical diagrams, working closely with teaming partners, • Lead short-, mid- and long-term opportunity pursuits, to include designing and executing capture, pricing, and outreach strategies through proposals, white papers, and other positioning documents, • Work closely with the finance team to develop strategic pricing Project Management and Coordination: • Lead and organize proposal teams, including technical writers, SMEs, and graphic designers, ensuring clear communication and task assignment., • Establish and monitor proposal timelines to ensure on-time delivery while managing multiple concurrent proposal efforts., • Facilitate bid/no-bid decision discussions with leadership and track the progress of all proposals., • Lead proposal reviews and coordinate the approvals processes and final production, including graphics and formatting, and executive sign-off., • Track and monitor proposal data and maintain detailed documentation for proposals and contracts. Collaboration, Teamwork, and Compliance: • Work closely with internal teams and strategic partners to develop winning strategies for each proposal., • Ensure proposals meet all compliance requirements, including technical specifications, legal, and contract terms., • Collaborate with graphic designers to ensure visuals complement and enhance written content., • Assist in maintaining proposal content libraries, including past performance and boilerplate sections and key proof point., • Act as a secondary reviewer for proposals led by other team members., • Partner with the marketing team to assist in the development of print and digital materials., • Implement best practices for proposal management and continuously seek ways to improve the efficiency and quality of the proposal process., • Lead debrief sessions to evaluate proposal successes and areas for improvement, and integrate lessons learned into future submissions., • Stay informed on industry standards, the latest government contracting regulations, and proposal development trends., • Maintain organized records of all proposal documents, submissions, and awarded contracts., • Occasionally attend industry events and conferences to stay updated on market trends and federal opportunities., • Support capture management and business development teams as needed. Assist in capture efforts to ensure teams are put together to optimally meet the RFP requirements (i.e. gap analysis)., • Support HR with recruiting efforts for Key personnel in proposals Required Qualifications: • Bachelor’s degree in Business, Communications, Technical Writing, or a related field., • 5+ years of experience managing multi-volume federal proposals, with a proven track record of success., • Comprehensive understanding of the federal government contracting environment, including knowledge of FAR/DFARS., • Ability to develop compliance matrices, technical content, and executive summaries that align with solicitation requirements., • Strong writing and editing skills, with excellent attention to detail., • Exceptional project management and organizational abilities, with experience handling multiple concurrent proposals. Preferred Qualifications: • Experience writing proposals for federal agencies across multiple sectors., • Shipley or APMP certification is highly desirable., • Project management certification (PMP) or equivalent is a plus., • Experience collaborating with senior management and various departments (technical, marketing, contracts)., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Teams, SharePoint)., • Familiarity with proposal management tools and platforms for document organization and tracking (e.g., SharePoint, GovWin, or similar platforms)., • Basic graphic design skills or experience working with designers is a plus. Basic knowledge of graphic design software (Illustrator, Photoshop, Canva) is a plus. Additional Requirements: • U.S. citizenship or permanent residency is required due to federal contract regulations., • Ability to pass a background check and obtain necessary clearances., • Competitive salary and performance-based bonuses., • Health, dental, and vision insurance., • 401(k) with company match., • Paid time off (PTO) and holidays., • Opportunities for professional development and certification support. PHYSICAL DEMANDS: This is a high-stress position based on full responsibility for Quivera and subsidiary operations. The Strategic Initiative Director handles detailed, complex concepts and problems, balances multiple tasks simultaneously, and makes rapid decisions regarding administrative issues. Plans and meets deadlines. Maintains a flexible work schedule to meet the demands of executive management. Hours may be long and irregular. SPECIAL REQUIREMENTS: Prefer US Citizenship. Subject to a background check and drug screening. Must sign a Confidentiality Agreement and abide by confidentiality regarding program and personnel matters. Quivera Enterprises LLC is an Equal Opportunity Employer and values diversity in its workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, national origin, disability, or veteran status.

Job Description Overview Tradesmen International is immediately hiring experienced Journeyman Painters for projects located in Houston, TX. This is a first shift opportunity with a prevailing wage of $23.55/hour. If you are a Painter eager to master your skills while working alongside our accomplished Craft Professionals, this is your chance to advance your career! Job Scope: • Painting a de-energized electrical transformer, • Utilizing conventional air spray systems, brushes and rollers, • Carry a 5gal buck of paint, • Keep paint pot full, paint lines clear and job site clean Responsibilities • Must be able to pass a drug screening and background check, • Must have TWIC Card and Valid DL Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description Transaction Coordinator — The Heart of the Deal You know that contracts aren’t just paperwork — they’re people. Behind every signature is a client starting a new chapter and an agent trusting you to help them deliver. You’re the person who catches what others miss, solves problems before they surface, and shows up with calm, steady judgment when the stakes are high. In this role, you won’t just be processing transactions — you’ll be protecting clients, supporting agents, and keeping deals on track so everyone crosses the finish line with confidence. You’ll work closely with our agents, clients and success team from contract to close, providing world-class service, thoughtful solutions, and the kind of care that turns stressful situations into success stories. What You'll Do: • Own the transaction process from executed contract to closing — ensuring every detail is correct, every party is informed, and every client feels cared for., • Act as the primary point of contact for clients, agents, lenders, title companies, and cooperating agents — always communicating with kindness, clarity, and urgency., • Identify potential problems early, and solve them proactively — using your judgment to protect the client and the team., • Serve as a trusted resource to agents, freeing them to focus on client relationships while you handle the logistics., • Keep every transaction organized, documented, and compliant while still delivering a personal, human touch., • Practice good judgment when navigating competing priorities, client needs, and tight deadlines — always doing what's right over what's easy., • Use AI / AI Agents to constantly improve the process. Constantly look for ways to improve the client and agent experience, and practice your craft to elevate your skills. Requirements You Might Be a Fit If: • You naturally see yourself as the protector of people and details., • You love being the go-to problem solver — and people trust you to make sound, balanced decisions., • You are calm under pressure and never lose sight of the client’s best interest., • You believe a successful closing is about more than paperwork — it’s about building trust with clients and agents along the way., • You are obsessed with the details because you know they matter., • You take ownership and pride in getting things done the right way. You’ve Probably Faced These Challenges Before: • Incomplete or messy transaction files slowing down closings., • Managing tight deadlines and juggling 15–30+ active transactions without clear processes., • Being the go-to for agents, clients, lenders, and title companies — often all at once., • Handling environments where your proactive, detail-oriented mindset wasn’t fully appreciated. If you’re nodding along — you may be exactly who we’re looking for. Success Looks Like: • Clients consistently say, “I felt so taken care of.”, • Agents trust you completely because you protect their reputation and their clients., • Problems get solved before they ever become visible to the client., • You elevate the team — helping every agent deliver a smoother, more confident client experience. WHAT YOU BRING: • 3+ years of experience coordinating real estate transactions in the U.S., • 12+ months of remote work experience., • Mastery of transaction tools like Dotloop, DocuSign, ZipForm, MLS, and CRM platforms., • A proven system for managing multiple deadlines and prioritizing effectively., • A service-first mindset: you anticipate client and agent needs before anyone has to ask., • The ability to stay calm, professional, and clear — even when clients are stressed and deals are under pressure. WHAT WE OFFER YOU • Freedom to Innovate: We value initiative and welcome improvements to our systems., • Cutting-Edge Tools: We'll equip you with every tool you need to work smart., • Fully Remote (Forever): Work where you work best., • Competitive Pay: Salary + bonus, based on expertise and results., • Real Impact: You’ll directly contribute to smoother transactions and happier clients. ABOUT THE HOUSTON PROPERTIES TEAM At the Houston Properties Team, we help clients and teammates make wise decisions. We view every home and career as an investment in both life and long-term wealth. We’re ranked as the #1 boutique real estate team in Houston with $2+ billion in sales and 1,000+ five-star Google reviews. Our core values drive everything we do: • Accountable: We do what we say, and we stand behind it., • Caring: We treat every client and teammate like they matter — because they do., • Coachable: Feedback helps us grow., • Transparent: We value honesty, not spin., • Knowledgeable: We invest in learning to better serve others. HERE’S WHAT HAPPENS NEXT • Apply: Click “Apply for this job” below and answer the questions., • Live Zoom: If we’re a fit, we’ll schedule a live Zoom with our team leader.

Job Description ABOUT THE ROLE We're on a mission to end the global housing crisis. Not with handouts, but by helping families in emerging markets buy land with utilities and title, and actually own their homes. This isn't just about shelter; it's about building lasting wealth for generations in thriving communities. Since 2015, we've raised over $100M in philanthropy and $15M+ in private investment. We strategically combine these resources to achieve outcomes that neither could accomplish alone. It's how we actually make things happen. As our full-time Partner, Global Community (Senior Philanthropy Officer), you'll be key to fueling our engine with philanthropy dollars. You'll work directly to nurture the folks already backing us and find new ones. You won't be flying solo. Our CEO, senior leaders, and the sharp minds in our Marketing and Comms team will be right there with you, helping you with prospect qualification, putting together local and international events, and compelling content to engage donors. Your main focus will be cultivating and growing The Builders program. These are high net worth individuals, family foundations, donor-advised funds, and corporate sponsors who commit $50,000+ a year for multiple years. Their money isn't for a one-off project; it covers our daily operations, R&D, and our core work helping communities get on their feet. Simply put, The Builders give us the breathing room to innovate, grow, and help more families truly own their future. If you want to be part of a story creating sustainable and efficient change for vulnerable communities and families, we welcome you to apply. Read our CEOs recent article on our innovative funding and model here. WHERE YOU'LL FOCUS * Raise $1.5-2M in total annual revenue from a portfolio of renewals, new, and lapsed US-based donors * Cultivate a Builders portfolio of 10-15 existing donors and achieve 75%+ annual retention * Close 8-12 Builder opportunities from new or lapsed donors * Generate new prospects through lead generation activities such as network cultivation, event attendance, research, etc. * Follow a metrics-driven strategy with complete and accurate CRM records to support your numbers * Learn and grow into an expert on New Story’s strategy, model, results, and impact * Work with our Marketing and Communication team to plan and execute cultivation and stewardship experiences and events for the Builders throughout the year, including international vision trips WHO YOU ARE * Mission-Aligned: You’re passionate about the generational impact of market-based solutions like our model. When you read this article, it excites you. * Dynamic, Relationship Builder: You're a high-energy, relational fundraiser excited to cultivate and expand our Builders program. * Experienced, Sales-driven Fundraiser: You're an fundraising professional with 7+ years in social impact or nonprofit fundraising, skilled in cultivating relationships with high-net-worth individuals, business leaders, and families, especially faith-driven donors. You have a proven track record of securing 6 and 7-figure gifts and excel at partnering directly with founders or CEOs to build crucial external partnerships. You're an organized and sales-driven team member comfortable with significant travel (~50%) to meet with Builders and prospects. * Autonomous and Entrepreneurial: You're comfortable flying solo and possess deep experience soliciting and successfully securing 6 and 7-figure gifts with minimal assistance. * Bonus: Spanish proficiency is a strong plus. REPORTING STRUCTURE This role sits on our Fundraising team and reports to the Chief Financial Officer with a heavy amount of collaborative time with the CEO, CBO, and MarComms team. LOCATION & COMPENSATION This is a remote, full-time role based in the United States. Given our work, we are prioritizing applicants in Austin, Houston, Dallas, and San Francisco. Salary is contingent upon location. * San Francisco: $120-150k USD + up to 30% bonus ($155-195K potential) * Everywhere else: $100-130K USD + up to 30% bonus ($130-170K potential) BENEFITS Health & Wellness. We believe in thriving communities and that starts with our team being happy and healthy. We offer generous medical, dental, and vision benefits alongside an optional FSA and Dependent Care FSA. We also provide company paid Short-term Disability and Life Insurance to provide additional peace of mind. Unlimited Vacation after the 1st Year. We believe you should have a flexible schedule that makes space for family, wellness, and fun. For the first 12 months, you'll have 12 days of PTO, 11 paid holidays, and YOUR birthday off. After year one, you can enjoy an unlimited vacation policy. Summer and Winter Time Off. We believe rest is critical to getting results. We intentionally pause as a whole company twice per year. Team members take off the first week of July as well as a the week between December 24 and January 1. 5-Week Sabbatical after 5th Year. At the 5-year mark, we celebrate your hard work and dedication with a sabbatical. Team members take 5 weeks off fully paid to rest, recharge, and reflect. Paid Parental Leave. Primary caregivers take 12 weeks paid time off. Secondary caregivers take 6 weeks paid time off. Adoption Reimbursement. For families who are willing to adopt, thank you! New Story will reimburse eligible team members up to $10,000.00 USD for adoption related expenses. 401k Investment Plan. New Story offers 401k investment plan so you can save money for the long-term. Intentional Gatherings. As a remote team, we recognize how valuable and rejuvenating in-person time can be. Whether it’s an all-company Team Summit, Fun Camp for fundraisers, or spontaneous department gatherings, we set aside budget to gather in-person to have fun, reflect, and plan together. Improve Thru Learning. We believe in always learning and leveling up our skills. Whether it's paying for a conference, an online course, or books, an internal Hackathon, a Tea(m) Talk, or a lunch and learn, we invest in each team member so they can be the best at their craft. Trips to the Field. It’s amazing to meet the families we help and see the homes up close and personal. You'll get to visit the work first hand in either Mexico or El Salvador. Prioritization will vary by role. ABOUT NEW STORY We solutions to end the global housing crisis by empowering families to become land and homeowners in thriving communities. Since New Story started in 2014, we have impacted over 15,000 lives through safe housing across 4 countries. We’re a vibrant and energetic team based across the US and in Mexico City. Usually, you can find us drinking coffee or bubble tea and eating churros wherever we can find them. ABOUT OUR CULTURE Culture is #1 for us. We invest significant time, focus, and resources to building the best environment possible. Why? Over the course of the year we spend a large chunk of our time at work. So at New Story, we want our team to find fulfillment, autonomy, mastery, and joy at work. A workplace where you can bring your whole self. At New Story, you can expect to find a culture that reflects our values: Courage to Pioneer. Through learning, innovation, and iteration, we create transformative solutions and unlock new opportunities for underserved families Humble Pursuit Of Excellence. We focus on the quality of our inputs, building strong personal habits and systems, and bringing our best every day. Extreme Ownership. We take full responsibility for our commitments, tackle challenges proactively, and own outcomes with resilience. Detailed Customer Obsession. We relentlessly seek to understand customer needs and desires, listening with curiosity and learning from feedback to improve. Building Together // Construimos Juntos. We are committed to each other’s success and well-being, knowing that when one succeeds, the entire team wins. A WELCOMING PLACE FOR ALL New Story strives to nurture a welcoming culture of shared values and radical candor for everyone. We welcome all applicants, regardless of background, to submit an application. Black, Indigenous, and people of color are especially encouraged to apply! We know we will only succeed if we have a team who brings a wide variety of perspectives and backgrounds. As an equal opportunity employer, our hiring decisions are based solely on qualifications, merit, and business needs at the time of hire. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization. Join us. Compensation Range: $100K - $150K

Job Description Position Summary: BD Associate performs multiple tasks in support of sales staff with quotes, booked jobs, pending/on going jobs, billing, and maintaining MEI software records. Assist in ensuring the salesperson’s ability to focus on sales activities. As a mentee, the coordinator will take direction/instruction from their mentor salesperson. Assist with client outreach, prospecting and follow ups. Essential Job Duties and Responsibilities: * Learn to devise and execute sales strategies to attain revenue goals and broaden our market share within the construction sector. * Learn to identify and prioritize prospective clients, including construction firms, contractors, and project managers. * Develop ability to deliver product presentations and demonstrations to highlight the features and advantages of our rigging solutions. * Collaborate closely with our engineering and operations teams to devise tailored rigging solutions that align with client needs and project specifications. * Prepare and present sales proposals, quotations, and contracts, adeptly negotiating terms and finalizing deals. Coordinate job walks as needed. * Provide ongoing support to clients, offering post-sale assistance, troubleshooting, and ensuring their satisfaction with our offerings. * Stay abreast of industry trends, competitor offerings, and market dynamics to maintain a competitive edge. * Manage and maintain customer/project information in CRM and other MEI software. * Develops professional and technical knowledge for equipment/trade craft and salesman ship. Minimum Qualifications (Experience, Skills, and Education): * HS Diploma or equivalent minimum, with Associates degree preferred * Previous experience in fast paced, construction office environment preferred * Good to excellent level of working knowledge of Microsoft Office suite to include Word, Outlook and Power Point * Advanced Excel and data entry skills * Excellent written and oral communication and interpersonal skills with internal and external stakeholders * Excellent organizational, detail oriented and time management skills * Effectively able to maintain discretion and confidentiality of employee and customer information as appropriate. * Ability to multi-task and process multiple activities successfully * Demonstrated ability to work under deadlines and timeframes effectively with a customer service demeanor. Physical Requirements and Working Conditions: Standard office environment including work at a computer terminal. Work involves extended periods of sitting, occasional walking and lifting up to 10 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Additional Requirements: Work with a Top-of-Mind Awareness for the safety of yourself and everyone at the job site. Must be able to work in a high functioning team environment. Display the highest levels of honesty, integrity, and professionalism. Take pride in your work and in the company. Communicate openly and strive for peak performance in daily tasks. Know and deliver the quality service MEI’s customers have come to expect. Disclaimer: This job description is intended to summarize the type and level of work performed by a Sales and is not an exhaustive list of all duties, responsibilities, and/or requirements. MEI reserves the right to change or modify this job description or the essential duties of the job, as necessary. MEI is an Equal Opportunity, M/F/Disabled/Vet Preferred Employer.

Job Description THE ROLE RMS is seeking a dynamic, tactical, and strategic HR Director to lead and elevate our Human Resources function across multiple sites and remote employees. This role requires a seasoned professional with a Bachelor’s and/or Master’s degree, or over 10 years of HR field related experience, and at least 5 years in a leadership role. The HR Director will support the Vice President of Human Resources in driving strategic initiatives, managing acquisitions, and enhancing organizational effectiveness in a 24/7 operational environment. This position is an on-site position located at one our RMS facilities in Texas or Pennsylvania. The ideal candidate will bring strong analytical and logical thinking skills, experience crafting and implementing training and development plans, and a proven ability to lead HR functions in complex, compliance-heavy industries such as manufacturing and/or industrial. The candidate must be willing to travel periodically to different RMS sites. SKILLS REQUIRED ORGANIZATIONAL - Leadership & Organization: • Exceptional ability to multitask, prioritize, and manage time and resources effectively., • Excellent time management skills with a proven ability to meet deadlines., • Exceptional attention to details., • Excellent interpersonal and customer service skills., • Excellent verbal and written communication skills. Leadership & Strategic Partnership • Lead and mentor the HR team, fostering a culture of collaboration and continuous improvement., • Partner with the VP of Human Resources (VPHR) to develop and execute HR strategies aligned with business growth and workforce planning., • Analyze workforce metrics and industry trends to inform HR initiatives., • Develop and lead talent programs to attract, retain, and develop top talent., • Oversee the full talent lifecycle: recruiting, onboarding, retention, and offboarding., • Collaborate with the Senior HR Talent Specialist and hiring managers to ensure effective staffing., • Establish relationships with universities and technical schools for internships and alumni recruitment., • Support succession planning for critical leadership and technical roles., • Develop and present HR reports to support strategic decision-making., • Address employee concerns and foster a positive workplace culture., • Conduct and oversee workplace investigations and represent RMS in EEOC and unemployment claims., • Ensure compliance with federal, state, and local labor laws., • Enforce policies related to safety, ITAR, drug/alcohol testing (including DOT compliance), and field-specific regulations., • Support and manage competitive compensation and benefits programs., • Align compensation practices with market data and industry standards., • Support benefits administration evaluations and renewal programs., • Work with HR Benefit specialist to handle ACA reporting (eligibility, administrative, and stability periods)., • Manage the performance appraisal system to align with organizational goals., • Guide managers on performance improvement plans and employee development., • Identify training needs and coordinate professional development programs., • Drive initiatives to enhance employee morale and satisfaction., • Cultivate a positive and productive work environment that reflects company values., • Recommend and develop personnel policies and procedures; update the Employee Handbook. The above list of activities is not all-inclusive but a general representation of the requirements of the RMS Human Resources Director. This above list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • Strong analytical and logical thinking skills., • Excellent communication and interpersonal abilities., • Proven leadership in team development and organizational effectiveness., • Expert knowledge of HR best practices, labor laws, and compliance., • HR certification (SHRM-SCP or SPHR)., • Experience in manufacturing and industrial environments., • Familiarity and proficiency with HRIS and talent management systems. ADP Workforce experience preferred., • Proficient in Microsoft Office, specifically Excel and Word., • International HR experience a plus, • Prolonged periods of sitting and computer work., • Periodic travel to domestic RMS sites., • The position may be based in RMS Houston, TX or Pennsylvania facility., • Travel time is expected to be 5 - 15%, • This is a full-time position, with a minimum expectation of 45 hours per week. Additional hours, including evenings or weekends may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to act professionally under stressful situations., • Able to understand, read, write and speak English., • Ability to lift 30 pounds., • Legally authorized to work in the United States Although position is based in an office area, the employee may enter a shop environment with exposure to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description THE ROLE We are looking for a Global Technology Solutions Engineer to join our team. The Global Technology Solutions Engineer plays a critical role in building, supporting, and executing RMS’s digital and metrology-driven initiatives. From digital job pack creation and 3D modeling to field support and project execution, this is a hands-on engineering role for someone who thrives in a multi-disciplinary, fast-paced environment. The ideal candidate will collaborate across field service, metrology, design, sales, and external partners to develop and deliver technology-centric solutions for turnaround execution. WHY JOIN RMS INC. Be part of a dynamic team modernizing industrial services through digital innovation. Own projects from concept to execution and see the impact of your work. Collaborate across disciplines in a fast-paced and highly technical environment. SKILLS REQUIRED ORGANIZATIONAL - Leadership & Organization • Ability to be self-motivated and work alone., • Ability to organize and manage multiple deadlines and priorities., • Ability to handle stressful situations in a calm-cool-collected manner., • Display ownership and accountability for tasks and responsibilities., • Excellent interpersonal and customer service skills, • Excellent verbal and written communication skills, • Experience with RTC360 scanning or Polyworks software preferred., • Familiarity with reverse engineering workflows and inspection tools preferred., • Hands-on experience in field service or shop-based repair/inspection environments preferred. Digital Job Packs & Modeling • Develop and deliver digital job packs including 3D models, fit sheets, and RTC360 scan environments., • Work closely with RMS Design Team on the creation of 3D models., • Review job packs with field service to ensure technical accuracy and execution readiness., • Support MT (Metrology Technicians) with all digital assets required for inspection and reporting., • Implement nameplate/component scanning processes for all incoming equipment., • Evaluate cost-benefit and develop KPIs for engineering replacement parts to support customer needs for reduced cost and lead time., • Create 3D models and detailed drawings to support:, • Special tooling for field service, • Rotor stands and inspection mandrels, • Parts manufacturing and custom components, • Own engineering project management for assigned tasks, particularly involving in-house manufacturing of components., • Prepare procedures, fit sheets, and modeling deliverables for shop and field turnarounds., • Support execution of TA activities both in the shop and field with modeling, documentation, and technical oversight., • Work with product engineers to expand use of metrology across different RMS product lines and equipment types., • Identify opportunities to introduce metrology into equipment without dedicated product engineers (e.g., extruders, end cutters, etc.). The above list of activities is not all inclusive but a general representation of the requirements of an RMS Inc. Global Technology Solutions Engineer. This list is subject to change based on the needs of the company. REQUIRED EXPERIENCE & QUALIFICATIONS • 3+ years of experience in mechanical design, CAD modeling, or field engineering required., • Desire to become proficient with 3D modeling software (SolidWorks or similar) required., • Experience reading, creating, and managing engineering drawings required., • Strong organizational and project management skills required., • Ability to collaborate cross-functionally with field service, metrology, and external teams required., • Experience with RTC360 scanning or Polyworks software preferred., • Familiarity with reverse engineering workflows and inspection tools preferred., • Hands-on experience in field service or shop-based repair/inspection environments preferred. OTHER INFORMATION • Travel time is expected to be 10-25%., • This is a full-time position, with a minimum expectation of 40 hours per week. Additional hours, including evenings or weekends, may be required based on project needs., • This position can be required to participate in the company random or customer specific drug and alcohol screening and background check., • Ability to understand, read, write, and speak English proficiently., • Ability and willingness to lift objects weighing up to 30 lbs., 50 lbs. with assistance., • Ability to walk, climb, reach above head, and balance., • Authorized to work in the United States., • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description $7,500-$10K Sign on Bonus for candidates currently employed as garage door installer by a reputable company AND a minimum of 1 year of garage door installation REQUIRED. Pay starts at $42 per estimated job hour (flat rate) Up to $47.25 based on experience and performance. * 1+ years’ Experience: $7,500 sign on bonus * 3+ years’ Experience: $10,00 sign on bonus We are seeking Experienced Installers in high volume markets to join the team. As an experienced installer, you will bring your knowledge to the best in the garage door industry. You already know a lot about garage doors, our team will train you on everything else (including customer experience and our systems), so you can thrive in your very own market. *Note: this role will be starting with us Monday October 13th, then going to Phoenix for training October 26th - November 21st. You Should Apply If: * 🎓You’ve mastered your craft, AND are still open to learn * ⭐You deliver quality work, and take pride in no “call backs” * ️‍⚙️Your peers describe you as reliable and trustworthy * ️‍️‍⚡You move fast, you’re always busy and no task is too small or too big * ️‍💰You are self-motivated, and you are looking for a 6 figure income * ️‍📈You have a minimum of one year as an installer (preferably more), and you want to join a company where you can grow professionally and personally You Shouldn’t Apply If: * You prefer working where there are no customers to talk to * You think your work is “good enough” * You think there is nothing more for you to learn * You are not weather resistant (hot/cold depending on season) * You don’t like driving. Your company vehicle is your office, and you will spend quite a bit of time driving to customer’s homes The Job: * Pick up all doors and parts from warehouse * Install new garage doors for residential customers * Remove existing door and mechanical parts * Replace worn or broken door parts using tools * Assemble mechanical parts * Install springs, sections, slats, and hardware * Run wiring to connect equipment * Lubricate and test mechanical parts for proper functioning * Educate customers on upgraded parts and services and ensure satisfaction * Document activities related to installations * Dispose of uninstalled garage doors and parts if applicable Basic Requirements: * Be nice! I know, we shouldn’t have to say that, but we mean it. * Able to bend, climb, kneel and stand for long periods * Physically able to lift 75lbs, and lift garage door panels above your head * Able to stand on a ladder * Expertise with power tools and hand tools * Valid driver’s license for at least 3 years with a clean driving record * Ability to pass a pre-employment drug test (not including THC) and criminal background check * Knowledge of basic software such as navigation apps, Google etc as well as tablet and computer use. * GED or HS diploma not required, however reading skills as well as basic math skills (measurements, payments) are required. * 1+ years as experienced garage door installer required * Professional appearance * Employment requires current eligibility to legally work in the United States. The Journey of an Experienced Installer: * Your journey begins at our A1 Training Academy in Phoenix, AZ for a duration of 4 weeks. * A1 covers flights and accommodation for the duration of your training in Phoenix. (Also, all apprenticeship/training weeks are paid ). * During the 4 week training, you will build upon the skills that you have acquired during your career. * Once you complete training, you will graduate to perform your duties in your market. Boom! Pay, benefits, other cool stuff: * Get your very own A1 wrapped truck with a gas card. Tools provided. * Steady job flow to keep you busy * Weekly pay * Medical, dental, vision, 401K. NOT a 1099 job. * Pay starts at $42/estimated job hour (piece rate) + commission on additional sales/services * $1K bonus at completion of Training Academy in Phoenix (in addition to weekly pay) Interview Process: Our interview process is not long, but it’s thorough. We want to make sure that each person who joins the team is the right fit for A1. And that we are the right fit for you! * After we review your application, you will be contacted for a virtual interview with a recruiter if we want to know more. Plan on up to 30 minutes. * Next step is an interview with the Area Manager for the location. Plan on approximately 30-45 minutes. This interview may be in person, or virtual. * Next step is when the fun begins: you will be invited to ride along with one of our installers so you can see what life at A1 is really like. Plan on half to full day. #INDA1 Benefits and other cool stuff: · Medical, dental, vision, 401K · Paid Time Off · Weekly Pay · Internal Promotion opportunities · Company swag (Please note: benefits are not available for part time, temporary or contract roles) A1 Garage Door (and affiliate companies) provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetics, sexual orientation, gender identity, or gender expression. We are committed to a diverse and inclusive workforce and welcome people from all backgrounds, experiences, perspectives, and abilities.

Job Description A well-established, family-owned provider of commercial services with over 60 years of success is seeking a motivated Sales Executive. Known for its values-driven, people-first culture, the company has grown from specializing in commercial cleaning and disinfection to also offering staffing solutions across hospitality, light industrial, and other industries. With national certifications in operational excellence and green practices, the company combines heritage, innovation, and integrity—and is looking for a sales professional who can drive growth while building meaningful, long-term client relationships. Responsibilities • Drive Growth: Develop and close new business opportunities across multiple sectors including hospitality, education, healthcare, industrial, retail, and events., • Build Partnerships: Establish trusted relationships with decision-makers, tailoring solutions that align with clients’ operational needs and staffing challenges., • Craft Proposals: Present service offerings that highlight quality, sustainability, and flexibility in both janitorial and staffing., • Expand Accounts: Cross-sell and upsell additional services, identifying ways to provide full-scale solutions to existing clients., • Account Management: Manage and retain existing customer-base by ensuring existing service meets contract and quality standards., • Collaborate Internally: Partner with operations and staffing teams to deliver on commitments and ensure client satisfaction., • Stay Ahead: Monitor market trends in commercial services and staffing, keeping strategies competitive and relevant., • Pipeline Ownership: Manage the sales funnel end-to-end, with accurate forecasting, reporting, and results tracking. Requirements Qualifications • Proven Sales Background: 2+ years in B2B sales within commercial services, staffing, or related industries., • Relationship Builder: Strong interpersonal skills with the ability to create trust and long-lasting client connections., • Solutions Mindset: Skilled at problem-solving and designing client-centered service packages., • Polished Communicator: Confident in presenting, negotiating, and writing proposals., • Values-Driven: Integrity, empathy, and commitment to client success are at the heart of how you work., • Dependability: Self-starter with ability to work independently., • Goal Oriented: Motivated by targets, accountability, and delivering measurable business growth., • Transportation: Has reliable means of transportation., • Travel: Willingness to travel around Houston area., • Availability: Available to work outside of standard business hours if needed to accommodate client schedules, travel requirements, or participation in trade shows, conferences, networking, and other work-related events. Preferred Skills and Qualifications • Experience with commercial cleaning services or the janitorial industry., • Established network within hospitality, industrial, or institutional facilities., • CRM experience for managing long-cycle, multi-stakeholder sales. Benefits Compensation & Benefits • Base salary plus a very competitive commission plan — rewarding performance and growth., • Comprehensive benefits package, including health, dental, and vision insurance., • 401(k) retirement plan with company contribution., • Supportive, values-driven environment where success directly impacts both clients and community. Why This Role Stands Out This is an opportunity to represent a heritage brand with a modern edge: • Family-owned, values-driven culture where people matter most., • Longstanding reputation in cleaning services, with expanded staffing solutions., • National certifications that back up a commitment to excellence and sustainability., • A company that measures success not only by revenue, but also by the strength of the relationships built.

Job DescriptionSalary: About JORI Logistics JORI is a client-focused, relationship-based, family-owned company that understands our clients Customs Brokerage and transportation needs. We combine unparalleled customer service with robust technology solutions to transform logistics into a competitive advantage for importers and exporters. Since 1992, weve provided turnkey logistics services, includingCanadianCustomsBrokerage,U.S. Customs Brokerage,Air Freight,Ocean Freight,Ground Freight,Trade Consulting, and more. Our client relationships, some of which are as old as we are, have grown to include some of Canadas foremost importers and exporters. With offices in Calgary, Houston, Almaty, and Cebu City, JORI is small enough to care and big enough to matter. About the Opportunity We are seeking a well-rounded and highly motivated Freight Forwarding Coordinator with hands-on experience managing Export and Import operations across all modes: Air Freight, Ocean Freight, and Domestic/Cross Border Trucking. This position is responsible for coordinating end-to-end international and domestic shipments, ensuring full regulatory compliance, and delivering exceptional service to customers. The ideal candidate is detail-oriented, adaptable, and confident navigating both operational logistics and export/import regulations. Your responsibilities include, but are not limited to: • Handle both Export and Import operations across Air, Ocean, and Domestic freight modes end-to-end., • Assist with document preparation and traffic coordination to process export/import shipments cost-effectively and in accordance with company standards., • Prepare and review documentation to ensure compliance with U.S. and destination country regulations., • Demonstrate and apply knowledge of AES (Automated Export System) filing requirements., • Work closely with carriers, agents, and customers to arrange bookings and transportation., • Source transportation methods and provide accurate quotes for customers., • Complete shipment process in CargoWise to manage shipment data, AES entry, bookings, routing and operational milestones., • Manage customer expectations through SOPs, KPIs, and other account-specific metrics., • Maintain accurate shipment data and document integrity for client web tracking platforms., • Prepare commercial documents and bills of lading (master, house, direct AWB/ocean) to support both export and import operations., • Onboard new carriers/agents based on our requirements., • Track and trace shipments from origin to destination, providing timely updates to clients., • Respond professionally to customer orders, inquiries, invoice questions, and complaints., • Maintain accounting records and process vendor invoices for payment., • Ensure compliance with U.S. Export Regulations, including EAR99, Export Licenses, Product Classification, and Denied Party Screening., • Understand and apply FMC (Federal Maritime Commission) regulations for ocean freight operations., • Ensure compliance with TSA and STA regulations for air freight., • Assist with identifying, vetting, and onboarding new carriers and service providers to meet service and compliance standards., • Work collaboratively with internal teams to ensure smooth and efficient logistics processes. About You To qualify, you will needat least 4years of experience in freight forwarding, with expertise in both export and import across air, ocean, and domestic freight. • Strong understanding of U.S. Export Administration Regulations (EAR), • Knowledge of FMC regulations for ocean freight, • Knowledge and understanding of TSA/STA regulations, Veroot and IACMS systems, including their application in managing TSA compliance and screening requirements., • Knowledge of U.S. domestic trucking regulations (e.g., DOT, FMCSA, ELD compliance)., • Knowledge of TSA audits and audit processes is a plus., • Dangerous Goods Certification for air, ocean, and ground preferred., • Proficient in CargoWise software required., • Valid U.S. passport required., • Excellent communication skills both verbal and written with strong customer service orientation., • Strong problem-solving skills and ability to work independently in a fast-paced environment., • Proficiency in Microsoft Office, • High school diploma or equivalent required; additional certifications in logistics or compliance are a plus., • Must be eligible to work in the United States. Most importantly, you have the willingness to learn and thrive in an environment where independence and responsibility are given without constant supervision. A team player who works well with others and with a growth mindset passionate about your craft, always looking for ways to improve yourself and the company, open to change and doing things differently. What We Offer As a productive member of our team, you will be rewarded with a competitive salary, as well as a range of attractive benefits, including: • Paramedical coverage and benefits, • Group insurance, • Work flexibility with our hybrid work model, • Career growth opportunities with our international portfolio, • Education support and personal development programs, • Reimbursement for home office equipment set up, • An opportunity to join a family-first, tight-knit team with incredible culture! Do our values resonate with you? If you want to be a part of a fast-growing and technology-driven company with a global reach, apply now!

Job Description We know the importance of teamwork and family values because we are a family-owned business. We see the true value of a skilled Mechanic, and that's why we know that family time and proper rest are very important. We provide our Mechanics with the best industry benefits and schedules for an excellent work/life balance. Altom Transport ensures our mechanics stay safe with the best training, best tools, and industry leading equipment. At Altom Transport, Inc. we value our Mechanics and offer a role that is not subject to the exposure of outdoor elements, no forced weekend work, and an environment where safety, respect, and dignity are primary focuses. Truly a career where the right individual can take pride in their craft. Requirements • Minimum of two-years diesel tractor experience., • Minimum of one-year trailer/tanker experience., • In lieu of experience, the completion of an applicable technical/trade school will be recognized., • Possess a strong work ethic and positive mental attitude., • Possess good problem-solving skills and attention to detail., • Maintain a safe, clean, and efficient work environment., • Comply with all Company policies, rules, and procedures., • Competitive Hourly Pay Rates with Generous Overtime Opportunity., • Shift Differential Pay for 2nd and 3rd Shifts, • Paid Time Off, Vacation Time, and recognized Holiday Pay., • Empower 401(K) Retirement Program With Company Matching On Day 1 Of Employment., • Blue Cross Blue Shield Group Health Insurance (Medical, Prescriptions, Vision, Dental.), • Multiple BCBS PPO plans to choose from., • HSA Employer Contributions Up To $2,400., • Company Paid Life Insurance., • Supplemental Life Insurance Available., • Disability Insurance - Optional Short and Long Term Available., • Company Paid Training., • Clean and Safe Working Environment., • Steel Toe Boot & Glove Reimbursement Program., • Safety and Shop Paid Bonuses., • Annual Tool Allowance Program.

Job Description Automotive Service Advisor Sign-On Bonus Up to $3,000 | Full-Time | South Houston, TX Are you passionate about cars and delivering outstanding customer service? We are looking for a skilled and experienced Automotive Service Advisor to join our fast-paced, high-performing team. If you thrive in a customer-focused environment and bring at least 5 years of experience, we want to hear from you! This is a fantastic opportunity to grow your career with a dealership that values your knowledge, professionalism, and commitment to quality. What You’ll Be Doing * Greet customers with professionalism and care, making them feel welcome from the start * Assess and document vehicle service needs accurately and clearly * Provide expert recommendations and explain repair options, timelines, and pricing * Collaborate with technicians to ensure timely and high-quality service delivery * Maintain detailed records of services performed and parts used * Proactively follow up with customers post-service to ensure satisfaction * Stay up to date with evolving automotive technologies and service standards What You Bring to the Team * Minimum of 5 years of experience in automotive service or sales (required) * Solid mechanical understanding, especially in diagnostics and maintenance * Experience with tire services and general automotive repair procedures * Excellent verbal and written communication skills * Ability to break down technical concepts for all customer levels * Strong organizational skills and ability to multitask in a fast-paced setting * A commitment to delivering exceptional customer experiences * Proficiency in service and diagnostic software * Valid driver's license Why Work With Us? * Sign-on bonus up to $3,000 for qualified candidates * Competitive compensation and flexible scheduling * Health insurance and employee discounts * Supportive team culture focused on your growth and success * Opportunities for advancement within a respected automotive group Schedule * Monday to Friday * Rotating weekends as needed About Us: Since 1998, DIB Automotive has been a trusted name in the automotive repair industry, known for delivering exceptional service with integrity, innovation, and a deep commitment to our community. Our foundation is built not only on technical expertise but also on a dedication to making a meaningful impact. We proudly support local charities, including initiatives for senior citizens and cancer patients, because giving back is at the core of who we are. Our pursuit of excellence has earned us the #1 ranking on Google Business—an achievement that reflects our unwavering dedication to both our craft and our customers. As we look ahead to expanding into a national franchise, we are seeking more than just employees—we are searching for individuals who want to become part of a long-term professional family. At DIB Automotive, you are not just starting a job; you are building a career filled with opportunities to grow, lead, and make a lasting difference. Together, we are creating a legacy that extends beyond repairs and maintenance, fostering an environment where both our team members and customers feel valued and supported. Joining DIB Automotive is more than a career move—it is a launchpad for professional growth. We are committed to helping our team members advance, offering opportunities to refine their skills, take on leadership roles, and even explore franchise ownership as we expand. Imagine shaping the future of automotive repair while growing alongside a company poised to make a national impact. What truly sets DIB Automotive apart is our unwavering commitment to family-first values. We do not just work together; we invest in one another’s success, celebrate shared achievements, and foster a culture of integrity, innovation, and ambition. By joining our team, you are becoming part of something greater—an organization where your contributions are recognized, your aspirations are supported, and your potential is limitless. Ready to make a meaningful impact while working with a team that values your experience and expertise? Apply now and let’s get started! Make your next move your best one. Join us as a Service Advisor and help create a smooth, transparent, and trusted experience for every customer who walks through our doors. Apply today and take the next step in your automotive career!

Job DescriptionReady for a Career that takes you places? • Seeking stability in your next role?, • Want to travel while you work?, • Love being outdoors and hands-on?If you answered YES, we want to speak with YOU! TRS Craft Services is immediately seeking Lead Event Installers for our client, an international provider of high-quality event services and structures. This is a permanent position. Scope of Work: Safely and efficiently perform duties as assigned within designated work area. • Reference and adhere to schedule/start times as required on operations schedule, • Consult with Site Manager about scope of work, • Help maintain a safe and clean job site, • Assist in assembly and dismantling at designated job sites while adhering to company standards, • Utilizes hand trucks, forklifts, hoists, and other material handling equipment to load and unload material at the event site, • Complete and maintain all required paperwork, records, documentation in a time frames required by management, • Follow and comply with all safety and company regulations, while maintaining site standards, • Complete understanding of P7 (AS120) frame tents and advance understanding of Uniflex (AS200) structures, • Possible contact with client on jobsite to address any questions or concerns and final site approval from onsite contact, • Additional duties and responsibilities may be assigned as deemed necessary from time to time.Supervision of staff, • High School Diploma/GED or relevant work experience preferred, • Previous experience as a general laborerLanguage Skills, • Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one setting or within a group atmosphere to other employees of the organization., • Hold valid driver’s license- preferred, • Hold or ability to obtain forklift certification for class 1-5 per OSHA classifications., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Regularly required to stand and use hands to handle, or touch objects, tools, or controls., • Occasionally required to walk; sit; reach above shoulders; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and use foot/feet to operate machinery, • Regularly lift and/or move up to 75 pounds, • Work in all weather conditions, • Good communication skills and the ability to work in a team environment, • Ability to set priorities and juggle multiple tasks, particularly in a fast paced, deadline-oriented production environment, • Ability to handle constructive criticism, as well as establish achievable goals to foster growth #zrhouston #zrgreenville TRS Staffing Solutions are an equal opportunities employer, and we welcome you to provide OFCCP data voluntarily hereCompany DescriptionOur recruiters are highly experienced in finding skilled craft professionals across construction, engineering, operations & maintenance, project services, commissioning and shutdown/outage needs. This is not a remote position! From the apprentice to the senior discipline supervisor, we have the experience and understanding to match the skills and knowledge of the candidate to your project needs. Stable company, seeking a dependable employee to grow with the company.Our recruiters are highly experienced in finding skilled craft professionals across construction, engineering, operations & maintenance, project services, commissioning and shutdown/outage needs. \r\n\r\nThis is not a remote position!\r\n\r\nFrom the apprentice to the senior discipline supervisor, we have the experience and understanding to match the skills and knowledge of the candidate to your project needs.\r\n\r\nStable company, seeking a dependable employee to grow with the company.

Job Description Rotating Machinery Services, Inc (RMS Inc.) is seeking a qualified Manual Machinist to work 1st shift and perform a variety of machining practices involved in turning, milling, drilling, threading operations, etc. They perform a detailed incoming inspection using micrometers and other fine measurement tools, learn to draw prints based on their findings and make recommendations on necessary critical repairs. As well rounded machinists and fabricators they are able to select and operate the proper machine shop tools to remove damaged babbitt and prepare the bearing for repair. They may also use raw materials, welding tools, flame spraying, or electrical test equipment to manufacture, alter or test components as part of the process. During the babbitting process they move the part to our custom foundry where they apply new babbitt using various casting techniques. Once the babbitt is cast, their skill at precision machining and metalworking outputs a finished bearing crafted to precise dimensions. Using non-destructive testing techniques and measurement tools they verify the quality and dimensions of their work before preparing the bearing to ship to the customer. JOB REQUIREMENTS AND QUALIFICATIONS • Ability and willingness to be in the shop environment a minimum of 8 hours per day, primarily standing and sitting., • Ability and willingness to work around and use large propane / acetylene., • Ability to operate small lifts, pallet jacks and other lifting equipment (training will be provided on our specific equipment, but basic skills are required beforehand)., • Advanced oral and written communication., • Advanced math skills to calculate tolerances and dimensions., • Must be able to read and understand Blueprints and G-Code., • Must be familiar with basic machining practices involved in turning, milling, drilling, threading operations., • Must be competent reading drawings and following instructions necessary to produce usable and saleable parts., • Must be able to hold tolerances as dictated by drawings, written instructions, or industry standards., • Must be proficient with the use of, the care of, and the calibration of all types of measuring devices (i.e., micrometers (OD and ID), dial calipers, dial indicators, etc.)., • Must possess and provide basic tools required for the execution of the position of manual machinist. Education: • OMEGA experience, • Proficient in running horizontal lathes and milling machines., • Capable of reading drawings and proper use of calibrated measuring tools., • Can hold tolerances of .0005"., • Read drawings and use of micrometers., • Basic machining knowledge and practices required., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs., walk, climb, reach, kneel, crawl, and balance., • The position will be based full-time in our South Houston, TX facility., • Availability to work weekends, holidays and overtime to meet company needs., • Able to understand, read, write, and speak English proficiently., • Authorized to work in the United States., • Able to pass a pre-employment drug screen, background check and physical requirements., • This role can be required to participate in company and/or customers random drug testing requirements., • While performing the duties of this position, the employee will be required to stand and walk for significant portions of the shift., • Ability and willingness to lift objects weighing up to 50 lbs. with assistance, walk, climb, reach above head, and balance., • Must be able to use hands for assembly and tool usage. While performing the duties of this position, the employee will be regularly exposed to moving mechanical parts. While the work area may be described as generally clean, safe, and "not loud", there will be machining operations that generate moderate noise and metal particles. WHAT WE OFFER • Competitive Pay, • Paid Time Off, • Medical / Dental / Vision, • 401k, • Employee Incentive Programs ABOUT RMS Rotating Machinery Services (RMS Inc.) was established in 1998 with the vision to reinvent the concept of an aftermarket turbomachinery business. The goal was to provide turbomachinery operators with unparalleled service based on established relationships, solid engineering, and technical expertise—all backed by responsiveness in competitive prices and lead times. RMS’ commitment to quality penetrates every aspect of the organization and in the guiding force for all decision making. With an equal blend of cutting-edge technology, engineering experience, and the work of skilled crafts people, RMS continuously delivers the best possible results to customers. RMS is a nimble organization with a collaborative culture of individuals who come to work every day with a desire to improve upon their craft and further the rotating machinery industry. RMS Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionSkip the line and apply on our website: ➡️ Apply NowAbout Us TeachMe.To is the leading peer-to-peer sports lessons marketplace on a mission to connect independent Pickleball coaches with aspiring players. As a fast-growing destination for pickleball coach jobs, pickleball instructor jobs, and pickleball teacher jobs, we empower talented professionals to share their passion for the sport. With thousands of coaches and players engaging daily, we invite you to join a movement that's shaping the future of pickleball instruction. Role Overview We are seeking a skilled and dedicated pickleball Instructor to join our dynamic platform. Whether you're a seasoned pickleball coach or new to the pickleball teacher profession, our flexible model allows you to set your own schedule, define your rates, and work with enthusiastic students ready to improve their performance. Responsibilities • Customized pickleball Coaching: Deliver personalized training that meets each student's unique needs., • Skill Development: Craft lesson plans and training regimens that enhance pickleball techniques, understanding, and confidence., • Positive Learning Environment: Foster a supportive atmosphere that encourages growth, enjoyment, and success in the sport., • Innovative Teaching Strategies: Use effective coaching methods and creative drills to ensure consistent progress, satisfaction, and retention.Requirements, • Previous experience in pickleball coach jobs, pickleball instructor jobs, or similar pickleball teacher roles., • A true passion for pickleball and a strong desire to inspire others., • Excellent communication skills to engage, motivate, and effectively teach students of all levels.Benefits, • Autonomy and Flexibility: Set your own schedule and prices, allowing you to reflect your expertise and availability., • Dynamic Student Base: Get immediate access to eager learners nationwide, expanding your reach., • Zero Hassle: We handle scheduling, payments, and marketing, so you can focus on delivering top-notch pickleball instruction.