Electrical designer jobs in Santa Ana, CaliforniaCreate job alerts

Senior Electrical Engineer, Electronics/Wireless Systems This position will be an integral part of our medical technology company that develops and manufactures innovative world-class medical technologies. The Senior Electrical Engineer will provide design expertise and technical leadership in the area of Electronics/Electrical Engineering development. The Senior Electrical Engineer will lead the technical design and architecture of new products and accessories for mobile medical devices from concept through production, often serving as the technical owner for key electronic systems. The Role We're looking for a talented, highly motivated, and experienced Senior Electrical Engineer with an expert-level background in wireless communication technologies, specifically Bluetooth, NFC, and related RF systems. In this critical role, you will be the technical lead responsible for the end-to-end electrical hardware design and successful integration of our next-generation products. You will drive technical decisions, mentor junior engineers, and work closely with cross-functional teams to ensure the architecture is innovative, highly reliable, and optimized for performance and manufacturability at scale. What You'll Do • Architect, lead, and execute the design and development of complex PCB schematics and multi-layer layouts for products, specializing in Bluetooth Low Energy (BLE) and NFC/RF systems., • Define, simulate, and optimize RF and antenna design for demanding wireless performance and coexistence in a mobile medical environment., • Own system-level integration, root-cause complex electrical and firmware issues, and define robust debugging strategies for the entire product lifecycle., • Establish and lead collaboration with firmware and software teams to define and finalize system architecture, communication protocols, and interface specifications., • Develop, review, and execute comprehensive validation and verification test plans, ensuring strict compliance with medical device standards, including advanced EMI/EMC and electrical safety requirements., • Drive project technical timelines, manage critical vendor relationships, and oversee the creation of complete technical documentation, including detailed Bills of Materials (BOM) and manufacturing specifications., • Analyze, diagnose, and resolve highly complex or ambiguous technical challenges across electrical, firmware, and manufacturing processes, often acting as the final point of escalation., • Bachelor's or Master's degree in Electrical Engineering or a related field., • 6+ years of progressive professional experience in electrical hardware design, preferably within a regulated industry (e.g., medical devices)., • Demonstrated track record of leading the design and successful production release of multiple products incorporating complex Bluetooth and NFC/RF solutions., • Expert proficiency with professional-grade schematic capture and PCB layout tools (e.g., Altium Designer)., • Deep theoretical and practical understanding of RF principles, advanced impedance matching, and antenna design/tuning for optimized performance and regulatory compliance., • Full understanding of microcontroller-based systems, low-power digital design, and precision analog circuit design., • Advanced experience with complex test equipment such as vector network analyzers, spectrum analyzers, and protocol analyzers for deep-level system diagnostics., • Significant experience with other wireless technologies (e.g., Wi-Fi, Zigbee, cellular) and their coexistence strategies., • Expert knowledge of ultra-low power design, battery management systems, and safety-critical power architectures for portable devices., • Familiarity with regulatory requirements (e.g., FCC, CE, IEC 60601) and experience in leading products through compliance testing., • Proficiency with Embedded C/C++ or other programming languages for hardware bring-up and verification., • Physical requirements/Work Environment:, • This position primarily works in an office environment and on an electronics workbench. It requires frequent sitting, standing and walking. Daily use of a computer and other computing and digital devices is required. May stand for extended periods when facilitating meetings or walking in the facilities. Some local travel is necessary; therefore, the ability to operate a motor vehicle and maintain a valid Driver’s license is required., • The physical demands of the position described herein are essential functions of the job and employees must be able to successfully perform these tasks for extended periods. Reasonable accommodation may be made for those individuals with real or perceived disabilities to perform the essential functions of the job described.

Job DescriptionCompany Description: We are an end-to-end Renewable Energy provider, offering products to commercial and enterprise clients in EV Charging solutions, Fleet Electrification, Solar Micro-grids, Energy storage, Hydroponic farming, and Rain Water/Grey Water collection systems. We have been experiencing tremendous growth in all these areas and operate under several government rebate programs that ensure a steady and reliable flow of revenues. Our company handles the entire flow of providing these products and services beginning with Sales, Provisioning, Design and Engineering, Contracting and Construction, Servicing and Maintenance. We are looking for people with strong work ethics and a commitment to excellence to join our team and contribute to the success of the company and be part of a tight-knit family at the same time. Overview of Position We are seeking an experienced Electrical Design Engineer to plan and oversee a wide variety of construction projects from beginning to end.You will be working with engineers and architects as needed, and keeping track of an inventory of equipment and materials. Must have previous experience in construction management projects and be knowledgeable of the regulations and permits required.The ideal applicant will be highly organized, with the ability to plan ahead and multitask in order to meet deadlines and keep projects under budget. If this sounds like you, get in touch with us. Electrical Designer skillset must include: • AutoCAD and/or Bluebeam skills required, • Must know how to create, markup, edit, and produce building plans, • Must have knowledge of Electrical Diagrams, such as Single Lines wiring, conduits, etc., • Must know California Building Code in detail, • Must be experienced in ADA parking requirements, sloping, the path of travel, etc., • Must have a basic understanding of trenching, running conduits, and concrete padding., • Must know how to design as-built site plans, • Must know how to coordinate with Utility companies, • Must be able to fully manage Permit applications, submittal, follow up, and Inspections., • Must be able to budget and manage any given construction job end to end, • Must communicate with vendors, partners, and providers in an efficient and conducive manner to move work forward.The tasks will include:, • Analyze reports, drawings, and tests to plan and design projects., • Establish design criteria and develop system designs from concept plans and interpret information set forth in basis of design as well as information gathered from users, project partners, field surveys, and code research., • Plan and develop drawings for production work including problem analysis, design layout, and calculations on non-routine assignments of substantial variety and complexity., • Perform various phases of planning, site evaluations, analytical designs, report preparation, specifications, and preparation of proposal and construction documentation and electrical plans as part of a project team., • Design various electrical projects including creating electrical schematics, grid plan layouts, electrical power systems, protection and controls, EVSE Loads, Utility connections, and site and facility design., • Execute a variety of electrical design assignments using prescribed methods and standard techniques including drawing sequence and presentation, sizing various system components, and refining rough sketches., • Review design drawings for quality assurance within scope, budget, and schedule., • Oversee construction projects, • Apply for Permits and other city/state requirements, • Determine the necessary equipment, materials, and manpower needed, • Ensure supplies and equipment are ordered and delivered according to the schedule, • Prepare reports regarding the job status, • Ensure compliance with safety regulations and building codes, • Train and mentor construction workers and construction laborers depending on the size of the project, • Collaborate with subcontractors, engineers, architects, and key team members of the project team, • Negotiate with external vendors on contract agreements, • Obtain the appropriate permits and licenses from authorities for construction sites, • Plan construction operations, • Hire contractors and staff including construction laborers, • Delegate responsibilities, • Allocate and manage resources to ensure that they are available when they are needed throughout the construction projects, • Keep all stakeholders aware of the progress on projects and prepare progress reports regularly, • Handle any environmental or local community issues that may come up during a project, • Conduct site checks to monitor progress and quality standardsJob Requirements, • Bachelor's or Graduate's Degree in electrical engineering, computer science or a related technical area., • High comfort level using CAD programs such as AutoCAD., • Proficient with Microsoft Office Suite and InDesign., • Strong grasp of PCB Design fundamentals., • Meticulous attention to detail., • 2-3 years of experience preferred.

Job Description A global, tier-1 industrial engineering company is seeking a Machine Shop & Facilities Supervisor to play a key role on their Engineering team. From designing and fabricating prototype sample parts to operating and maintaining machine shop equipment, this is a perfect role for a hands-on Engineer or Machine Shop technician looking to play a key role in designing industrial parts while also leading and managing a dedicated team of technicians. This is an excellent role for a skilled Machine Shop tradesman or hands-on Mechanical Engineer looking to take their career to the next level with a Tier-1, global industrial parts designer for the concrete, marine and irrigation industries. Responsibilities • Operate and maintain all in-house machine shop equipment, such as milling machine, cutters, bits, drills, hand and power tools, etc., • Fabricate prototype sample parts, assemblies, fixtures, and tooling, for production and R&D departments, • Play key role in the development of designs through conceptual sketches, layouts, etc, and assist in the generation of engineering drawing documentation, • Perform, assist or supervise in the rework/repair of production items including gearboxes, induction motors, weldments and mechanical components, • Maintain, repair and troubleshoot in-plant equipent and vehicles, such as forklifts, dock lift gate, piston and screw compressors, welders, etc., • Oversight of facilities, including electrical and air delivery and supervise machine shop and facilities technician and monitor workloads and project progress, • Manage safety programs, including hot work training, HAZCOM compliance and hew hire safety walkthroughs, • Conduct building, hazard and solar panel inspections to ensure compliance with safety and operational standards, • Independently develop or provide input into the design of specialty tools such as, fixtures, jigs, and process automation set-ups required for production and inspection processes and for R&D testing. Includes layouts, sketches, etc. for creating engineering type documentation, • Trade school and/or 5+ years of progressive hands-on experience with industrial machine shop experience, • Experience with MIG, TIG, Stick welding for fixtures, tooling fabrication and repair, and production items, • Familiarity with facilities electrical power up to 600VAC, 3-phase, including electrical panels and service disconnects, • Must be able to work with engineering drawing, hand sketches and rough layouts, as well as written and verbal instructions, • Bachelors Degree or Advanced Studies in Mechanical Engineering a plus, but not required. This is a hand-on Machine Shop role, with design a secondary responsibility, • Flawless safety record and takes pride in designing and building top-tier components

Job Description For over fifty years, Custom Power has been at the forefront of designing and manufacturing specialized battery packs and advanced battery management systems. Serving vital industries such as medical, aerospace, defense, and industrial – from the depths of the ocean to the fringes of space – our team of expert design engineers collaborates closely with clients. We utilize a broad spectrum of chemistry technologies to develop the perfect battery solution. Offering both primary and secondary chemistries, we adhere to international standards such as UL, IEC, CE, and CSA. As an ISO 9001, AS9100, and ITAR-registered company, Custom Power is committed to delivering unparalleled quality and versatility in our battery solutions. Responsible for design and validation of electronic circuits, and specification and programming of electronic test equipment. This position requires good communication skills and effective teamwork. All projects involve collaborating within a multidisciplinary team to design a battery pack. The candidate will be responsible for designing, prototyping, testing, and transitioning electronic circuits, interfaces, cables, accessories, and their corresponding documentation to manufacturing. From your very first day of employment with us, your success will be our top priority. You'll be paired with our Global Battery Technologist for mentoring and support, ensuring you are part of an organization that values your development and well-being and is dedicated to making every workday rewarding. Additionally, you'll have the opportunity to engage in various aspects of design and battery pack development, encompassing a wide range of designs and applications for some of the largest and most dynamic companies in the world. ESSENTIAL DUTIES AND RESPONSIBILITIES • Circuit Design: Develop and design analog and digital electronic circuits for battery packs of various chemistries, ensuring optimal performance, efficiency, and safety., • Battery Charger Systems Development Integration: Develop and Incorporate battery charger systems into circuit designs, considering charging efficiency, safety, and compatibility with various battery chemistries., • Component Selection: Identify and select appropriate components, such as voltage regulators, protection circuits, monitoring systems, and battery chargers, to meet project requirements., • Schematic Capture: Utilize Altium Designer for detailed schematics, ensuring accurate representation of circuit configurations., • PCB Layout: Design and optimize printed circuit boards (PCBs) using Altium Designer, considering factors like signal integrity, thermal management, and manufacturability., • DFM (Design for Manufacturing): Take ownership of Design for Manufacturing principles, ensuring that circuit designs are conducive to efficient and cost-effective production processes., • DFT (Design for Testability): Implement Design for Testability strategies in circuit designs, enabling effective testing and troubleshooting during the manufacturing phase., • BMS Development: Collaborate with Firmware Engineers to develop Battery Management Systems (BMS) firmware, ensuring efficient and safe battery operation., • Fuel Gauge Integration: Work closely with Firmware Engineers to integrate fuel gauging solutions into battery pack designs, providing accurate state-of-charge information., • APQP (Advanced Product Quality Planning): Apply APQP methodologies to ensure robust, high-quality circuit designs., • PPAP (Production Part Approval Process): Execute PPAP requirements, providing the necessary documentation to validate and approve the manufacturing processes., • Prototyping: Collaborate with cross-functional teams to build and test prototypes, iterating designs based on testing outcomes., • Compliance: Ensure designs comply with relevant industry standards, including those set by the United Nations (UN) for the transportation and handling of lithium-ion batteries. Adhere to Underwriters Laboratories (UL) standards for safety and performance in battery pack designs., • Documentation: Maintain comprehensive documentation of development, product design, specifications, and testing results in accordance with company process and regulatory requirements and standards such as UN, UL, IEC, AS, FDA., • Collaboration: Work closely with other engineers, including, Mechanical, Firmware, Technicians, and Project Managers to achieve project goals within specified timelines., • Bachelor’s degree in electrical engineering or a related field; Master's degree is a plus., • 10+ years of experience in electronics technology and embedded hardware., • 8+ years designing Battery Management Systems for battery applications., • Preferred experience in the design of circuits for lithium-ion battery packs., • Proven experience with analog and digital circuits and power system design., • Proficiency in using Altium Designer for schematic capture and PCB layout., • Experience with the integration of battery charger systems into circuit designs., • Familiarity with thermal management in battery pack designs., • Knowledge of energy storage systems and renewable energy applications., • Experience with ownership of DFM and DFT principles., • Experience with APQP and PPAP requirements in the product development process., • Experience collaborating with Firmware Engineers for BMS and fuel gauge development., • Familiarity with relevant UN and UL industry standards and regulations., • Excellent problem-solving skills and attention to detail., • Effective communication and collaboration skills within cross-functional teams. This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Job Description Company Overview At Fortis Fire & Safety, we provide industry-leading fire protection & security services across the United States. Our ever-growing footprint can be seen in California, Florida, North Carolina, and Chicago, and we are acquiring new brands all the time. We are proud to work together as one team under the Fortis Fire & Safety family, which includes CJ Suppression, Diversified Systems, Inc., Integrated Fire & Security Solutions, LifeSafety Management, Piper Fire Protection, and VFS Fire & Security Services. United by a shared mission, we deliver comprehensive fire protection and security solutions nationwide. Joining Fortis means becoming part of a nationwide, next-generation fire protection company. We're dedicated to a People-First philosophy, where we invest in our team through training and development, as well as a competitive benefits package. In return, we expect the very best from each of our employees every day. If you are ready to be exceptional in your chosen career, apply to work with us today! Here at Fortis and throughout our family of brands, we offer a comprehensive benefits package that includes: • Paid vacation and sick time, • Company Paid Holidays, • Additional paid time off for life events (e.g., jury duty, bereavement), • Competitive compensation, • 401(k) retirement plan with competitive company match, • Medical, Dental, and Vision insurance, • Company-paid life and short-term disability insurance, • Supplemental Long-term Disability and Life Insurance Packages, • Legal Insurance, • Pet Insurance Job Summary: VFS is seeking a detail-oriented and experienced Fire Sprinkler Designer to join our fire protection team. This role is critical in ensuring the safety and compliance of fire suppression systems across commercial, industrial, and residential projects. The ideal candidate will have a strong background in fire protection design, proficiency in CAD software, and a solid understanding of NFPA standards. Essential Duties and Responsibilities: • Design and layout fire sprinkler systems using AutoCAD or specialized CAD platforms (e.g., HydraCAD, AutoSPRINK)., • Perform hydraulic calculations to ensure system efficiency and code compliance., • Interpret architectural, structural, mechanical, and electrical drawings to integrate sprinkler systems seamlessly., • Apply NFPA 13 and other relevant codes to system design based on building type, occupancy, and hazard classification., • Prepare detailed shop drawings, material lists, and submittals for approval., • Collaborate with project managers, engineers, contractors, and AHJs throughout the design and installation process., • Conduct field surveys and inspections to verify design accuracy and support installation teams., • Maintain accurate documentation and records for permitting, inspections, and project closeout., • Participate in design review meetings and contribute to continuous improvement initiatives., • High school diploma or GED required; Associate or Bachelor's degree in Mechanical Engineering, Fire Protection Engineering, or related field preferred., • Minimum of 2–5 years of experience in commercial fire sprinkler system design., • NICET Level II or higher certification in Water-Based Systems Layout preferred., • Proficiency in AutoCAD; experience with Revit, SprinkCAD, or HydraCAD is a plus., • Strong understanding of NFPA 13, IBC, IFC, and other applicable codes., • Ability to perform hydraulic calculations and use design software tools effectively., • Excellent communication skills and ability to work collaboratively in a team environment., • Strong attention to detail and organizational skills., • Ability to travel to project sites for surveys or inspections., • Ability to meet company driving eligibility requirements, including holding a valid driver's license and maintaining an acceptable motor vehicle record. This pay range reflects the compensation rate Fortis Fire & Safety reasonably expects to pay for this position at the time of posting. Final compensation may vary based on factors such as experience and skillset. This role is also eligible for benefits including medical, dental, vision, 401k match, pet insurance, short term/long term disability, etc... Compensation Rate$40—$48 USD This role may require extended periods of sitting or standing, movement around the office or job site, and operation of standard equipment. Physical activities can include reaching, bending, kneeling, climbing, and lifting up to 75 lbs. Field positions may involve heavy lifting, working in varying climates (including outdoor conditions), construction or low-voltage environments, and exposure to dust, noise, or confined spaces. Personal protective equipment (PPE) may be required. Some roles may require travel. Fortis Fire & Safety Inc. is an Equal Opportunity Employer. Employment decisions are based on qualifications, merit, and business needs. We do not discriminate on the basis of race, color, religion, sex, gender identity or expression, sexual orientation, age, national origin, disability, veteran status, genetic information, or any other status protected by applicable federal, state, or local law. Reasonable accommodations are available for individuals with disabilities to perform the essential functions of their jobs. Employment is contingent upon successful completion of job-related pre-employment screenings, which may include a background check and/or drug testing, in accordance with applicable laws. Applicant Notices Fortis Fire & Safety provides required federal, state, and local labor law notices to all applicants. Applicants may review the following notices at any time: Federal Notices • FMLA General Notice (English), • FMLA General Notice (Spanish), • USERRA Rights Notice (English), • USERRA Rights Notice (Spanish), • Employee Polygraph Protection Act (EPPA) Notice (English), • Employee Polygraph Protection Act (EPPA) Notice (Spanish), • E‑Verify Participation Posters Fortis Fire & Safety Inc. participates in E‑Verify. We use E‑Verify to confirm the identity and employment eligibility of all new hires. For more information, visit Illinois Notices • Your Rights Under Illinois Employment Laws, • Illinois Paid Leave for All Workers Act, • Illinois Equal Pay Act – Pay Transparency Notice, • VESSA (Victims' Economic Security and Safety Act), • Illinois Right to Privacy Poster (English), • Illinois Right to Privacy Poster (Spanish), • CA Minimum Wage, • CA Paid Sick Leave, • CA Pregnancy Disability/CFRA Leave, • CA Whistleblower Protections, • NC Wage & Hour Notice, • NC OSHA Notice

Job Description At Turion Space, we’re building spacecraft to secure Earth and expand humanity’s reach beyond it. As a Senior Wire Harness Designer at Turion Space, you will responsible for the design, development, and integration of electrical harnesses for aerospace systems. This role involves creating detailed harness layouts, routing, and assembly drawings to meet stringent aerospace standards and program requirements. This is a full-time, exempt position based on-site at our Irvine, California headquarters. Key Responsibilities * Own harness design and documentation from concept through launch across multiple spacecraft projects * Create and maintain harnessing documentation including drawings, and wire diagrams * Write harness instructions and iterate based on technician feedback * Serve as the wire harnessing subject matter expert (SME) and consult with other disciplines * Select and manage vendors for aerospace electrical components including connectors, crimps, shielding, overwrap, and wires * Manage harness vendors and build processes and priorities * Define test acceptance procedures, own final acceptance and lead troubleshooting and root cause analysis * Perform harness routing within complex assemblies and ensure compliance with space constraints and environmental requirements * Support and participate in space vehicle integration in clean room * Maintain effective communication with all the functional groups to ensure manufacturability and project success (including mechanical, manufacturing, software, test, and supply chain) Minimum Qualifications * Associate or Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or related field; or equivalent technical experience. * 7+ years of hands-on experience designing and assembling wire harnesses in a high-reliability environment. * Proficiency in tools for harness design (Altium, CATIA Electrical, Creo Cabling, or similar). * Knowledge of wire selection, shielding, EMI/EMC considerations. * Confidence working in the lab automated test equipment, hipot testers, DMMs, and power supplies. * Ability to read and interpret electrical schematics and mechanical drawings; excellent attention to detail. Preferred Qualifications * Familiarity with aerospace standards (AS50881, NASA-STD-8739.4, IPC/WHMA-A-620) * IPC/WHMA-A-620 certification * Hands on experience assembling harnesses, soldering and crimping, with D-sub, micro-D, nano-D, MIL-DTL-38999, Harwin Datamate, and other connectors * Experience with PLM systems (Teamcenter, Windchill) * Ability to obtain and maintain a Secret and/or a TS/SCI clearance. Senior Wire Harness Designer Salary: $90,000 - $130,000 USD. ITAR Requirements: This position may include access to technology and/or software source code that is subject to U.S. export controls. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Benefits: We offer a comprehensive compensation and benefits package designed to support the well-being and professional growth of our employees. In addition to a competitive base salary and company stock, determined by factors such as job-related knowledge, education, skills, experience, and market demand, full-time employees are eligible for: * Equity: Receive equity in Turion Space, letting you benefit from the company's success * Health Insurance: Comprehensive medical, dental, and vision coverage for employees and their dependents. * Retirement Plans: Access to a 401(k) plan to help you plan for your future. * Paid Time Off: Generous vacation days, personal days, sick days, and holidays to ensure you have time to recharge. * Professional Development: Opportunities for ongoing training, workshops, and courses to advance your skills and career growth. * Team Building Activities: Regular social events, team outings, and company-sponsored activities to foster a positive work environment. We are dedicated to providing a supportive and enriching environment for our team members, recognizing that our collective success is built upon the well-being and satisfaction of each individual. Turion Space is an Equal Opportunity Employer; employment with Turion Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Compensation Range: $90K - $130K

Job DescriptionJob Summary Enerlites, Inc. is an innovative designer and manufacturer of lighting controls and wiring devices. With headquarters in Santa Ana, California, we have national and local distribution partners helping meet the needs of our growing customer base. As an engineering and design company we are committed to delivering the safest and most technologically advanced products, while offering the most competitive prices on the market. With innovative USB charger receptacles, advanced motion sensors for energy savings and power consumption controls, to streamline USB floor boxes, we continue to deliver innovative products with quality second to none. We are striving to work within a team environment that encourages personal as well as overall company growth. Qualifying candidate please submit resume for this great opportunity to work in a friendly, team oriented and result driven company. Responsibilities • Expands and maintains potential and current national and regional distribution accounts., • Meets regional sales target by using forecasting skills; preparing an annual budget; scheduling expenditures; analyzing variances; initiating corrective actions., • Establishes sales objectives by creating a sales plan and quota for districts in support of national objectives., • Maintains and expands customer base by counseling regional sales representatives; building and maintaining rapport with key customers; identifying new customer opportunities., • Recommends product lines by identifying new product opportunities, and/or product, packaging, and service changes; surveying consumer needs and trends; tracking competitors., • Implements trade promotions by publishing, tracking, and evaluating trade spending., • Updates job knowledge by participating in educational opportunities; reading professional publications; maintaining personal networks., • Establishes and maintains relationships with territory independent sales reps., • Accomplishes sales and organization mission by completing related results as needed. Requirements • Sales experience in electrical industry is a must and specializes in wiring devices and lighting control is preferred., • 20%-30% of travel is required, • Excellent presentation and communication skills, strong organization skills and self-motivated., • Able to work with minimum supervision, team player and goal oriented. Job Type: Full-time Benefits We offer competitive employee benefits, including medical, dental, vision at 100% paid by the company and 401k with matching. • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off License/Certification: Driver's License (Preferred)

Job Description SPEC Services, Inc. is a premier firm in Electrical and Control Systems engineering and is seeking a self-motivated and energetic applicant to apply for an Electrical & Control Systems Lead Designer position in Southern California. About the Position In this position, you will apply your knowledge of the principles of electrical & control systems design to: • Lead the development of industrial construction drawings, including single line diagrams, area classification diagrams, grounding, lighting, conduit/cable tray, schematics and wiring diagrams, cable/conduit schedules, installation details, PLC panel layout and I/O schematics, loop diagrams and control system architecture. Responsibilities Your core duties and responsibilities may require you to do the following: • Lead the electrical & control systems design development for simple projects, managing other designers and drafters as needed., • Support Principal Electrical & Control Systems Designers on large and complex projects., • Perform site visits to gather field data and verify existing facilities and project requirements., • Use software tools to perform design calculations such as cable tray sizing, conduit sizing, duct bank sizing, voltage drops, etc., • Support the development of design labor estimate for new projects., • Keep track of project budgets, schedules and change orders., • Develop construction drawings and material requirements., • Prioritize and manage multiple tasks/projects with various due dates. Attend coordination and status meetings., • Strong verbal and written communication skills are required., • Strong proficiency with AutoCAD is required., • Desire and ability to learn new skills and assume greater responsibilities is required., • Working experience with electrical construction is required., • Proficiency with additional 3D Design software, including Civil 3D, Plant 3D and AVEVA E3D is strongly preferred., • Proficiency with MicroStation is preferred., • Ability to visit local project sites for data gathering and inspections with occasional travel to farther locations is required., • 10+ years designing projects involving medium and low voltage power systems, grounding, lighting, instrumentation and control systems., • Energy infrastructure experience is preferred., • Engineering consulting experience is preferred., • Working knowledge with instrumentation, programmable logic controllers (PLC) and distributed control systems (DCS) is preferred., • Candidates must be knowledgeable in electrical design, NEC and API 500. Join a company with a rich history of excellence in engineering, design, and project management. At SPEC Services, we pride ourselves on delivering effective system solutions and outstanding client service. Our success is built on fostering a creative and technically proficient work environment that nurtures leaders and teams. Be part of a community that values innovation and collaboration. Salary Range: $32-$66 Hourly Ready to make your mark in the energy sector? Apply now and become a vital part of our innovative team at SPEC Services!

Job Description Join a team where your impact reaches beyond the stars! At Terran Orbital, you're not just part of the system – you're a vital force propelling our mission forward. As trailblazers in satellite manufacturing and aerospace innovation, we shatter boundaries daily to deliver groundbreaking solutions that power our nation's defense and commercial missions. We are a unique, fast growing, and trusted team dedicated to swiftly and efficiently designing, building, launching, and operating state of the art satellites for advanced mission constellations. If you're driven by purpose, inspired by challenges, and ready to leave your mark on the universe, you'll find a home and endless opportunities for growth here. Together, let's redefine what is possible in orbit and beyond! Terran Orbital is seeking an experienced Sr. Power Electronics Design Engineer to join our dynamic team. Reporting to the Integrated Product Team (IPT) Lead – Electrical Power Systems (EPS) the Sr. Power Electronics Design Engineer will play a pivotal role in designing cutting edge spacecraft solutions that drive performance, efficiency, and reliability in next-generation power systems. This is your opportunity to innovate at the intersection of advanced electronics and high impact applications, collaborating with a team of experts to shape the future of energy delivery. Key Duties and Responsibilities • Apply innovative design techniques to switched mode power conversion for isolated and non-isolated topologies from Bus voltages of 66V to regulated voltages as low as 0.8V., • Work in a fast-paced team environment on a variety of R&D, proof of concept, and production programs., • Power electronics design for switched mode conversion using digital and analog control techniques., • Design to meet EMI/EMC qualification., • Well versed in sampling theory and ADC/DAC implementation for feedback and control a plus., • Circuit and system level modeling and analysis experience using spice, MATLAB, Simulink, or other comparable tools., • Magnetics design including drawings for manufacture., • Perform worst case analysis of all circuit implementations showing stability and functional performance over time and environments., • Documenting designs and proving requirements compliance., • Schematic capture and board layout experience for power supplies, Altium Designer preferred., • BS degree or higher in Electrical Engineering or a related discipline., • 5+ years (Sr. Engineer - Level 3) of switched mode power electronics design experience., • 8+ years (Staff Engineer - Level 4) of switched mode power electronics design experience., • Working knowledge in the following areas: solar array to battery management systems, bus voltage to lower regulated working voltages, system/board level grounding/shielding and EMC design techniques, motor controller design a plus., • Radiation hardened and high reliability electronics design experience., • Experience with EMI/EMC qualification testing per military and commercial standards and (e.g. MIL-STD-461, CRISPR 22, RTCA/DO-160, etc.).., • Experience in design for harsh environments as embodied in common commercial and military standards (e.g. RTCA/DO-160, MIL-STD-810, etc.)., • Knowledge of device characteristics relevant to power electronics, such as: MOSFET, GaN, SiC, IGBT, BJT, JFET, diodes, various capacitor families, FPGAs, etc. Sr. Power Electronics Design Engineer (Level III) - $120k to $175k Staff Power Electronics Design Engineer (Level IV) - $160k to $190k Your actual level and base salary will be determined case-by-case and may vary based on the job-related qualification, knowledge, skills, education, and experience. In addition to base salary, we offer 100% covered medical, dental, and vision coverage, a 401(k) match, Flexible Time Off (FTO), covered life insurance, maternity and paternity leave, tuition reimbursement, employee referrals, and lots of swag! Salary Range$120,000—$190,000 USD Full-time positions only: Benefits • 100% Company-paid comprehensive medical, dental, and vision coverage for you and your dependents, • 401(k) Match, • Flexible Time Off (FTO), • Education Reimbursement Terran Orbital is a leading manufacturer of satellite products primarily serving the aerospace and defense industries. Terran Orbital provides end-to-end satellite solutions by combining satellite design, production, launch planning, mission operations, and on-orbit support to meet the needs of the most demanding military, civil, and commercial customers. Learn more at Physical Demands An employee must meet the physical demands described to perform the essential functions of this job successfully. In performing the duties of this job, the employee is routinely required to sit or stand for long durations of time, in addition to bending, reaching, and walking. This would require the ability to lift or move objects up to 10 pounds and occasionally lift or move objects up to 25 pounds. This position is generally sedentary, with substantial computer usage. Work Environment The job operates in a professional office environment but in a manufacturing company. This job routinely uses standard office equipment such as computers, phones, photocopiers, and scanners. Disclaimers To comply with U.S. Government space technology export regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. In addition, please note that this position may require a current United States National Security clearance or eligibility for such a clearance. Terran Orbital is an Equal Opportunity/Affirmative Action Employer. We consider applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, or membership in any other group protected by federal, state, or local law. If you need assistance or accommodation due to a disability, you may contact us at . Terran Orbital does not accept unsolicited resumes from recruiters, employment agencies, or staffing firms. To conduct business with Terran Orbital, a Master Services Agreement (MSA) must be executed and confirmed prior to submitting any information relating to a potential candidate. Without a signed MSA, Terran Orbital shall not be responsible to any individual or entity for any payment relating to any form of fee or compensation. And, in the event that a resume or candidate is submitted by a recruiter, an employment agency, or a staffing firm without a fully executed MSA, Terran Orbital has the unrestricted right to pursue and hire any of those candidate(s) without any legal or financial responsibility to the recruiter, agency, and/or firm.

Job Description TRL11 is a venture backed deep tech / defence tech startup bringing cutting-edge video technology to Aerospace applications. Based in Irvine, CA, we are seeking highly passionate, skilled and experienced Senior Electrical / Electronics Engineers with a focus on cutting edge camera / edge processing technology, to join our team. As a Senior Electronics Engineer, you will be responsible for the design, development, and implementation of advanced camera systems, video edge processors / storage systems, networking equipment, etc. to support our patent pending Space Aware Video Software Suite. Join our team and play a crucial role in shaping the future of Human Space Exploration and US National Security. This is a completely on-site job. Requirements Responsibility: • Lead the design and development of video- camera, compute, and storage systems and related electronic components, including image sensors, image processors, high speed persistent memory devices, high speed digital busses, inter connectivity incl. physical layers, connectors, harnesses., • Collaborate with cross-functional teams, including software engineers, mechanical engineers, and product managers, to define video system’s requirements and specifications., • Perform detailed block diagram, circuit design, schematic capture, and PCB layout for camera subsystems, ensuring compliance with industry standards and regulations., • Research and stay up to date with emerging camera technologies and trends, • Troubleshoot and debug issues during development, and production, • Assist Test Engineers to develop and execute test plans to verify imaging / storage system performance, image quality, and reliability., • Provide mentorship to junior engineers, • Collaborate with external suppliers and manufacturers to ensure the timely and cost-effective production of video systems, while maintaining quality standards., • Stay up-to-date with advancements in camera technology, compute capabilities, industry standards, and best practices, actively contributing to the innovation and improvement of our products. Requirement: • Bachelor's or Master's degree in Electrical or Electronics Engineering, more advanced degrees are preferred., • 5-10+ years demonstrable experience as hands on development engineer with a specialization in video or camera technologies, • Strong knowledge of video recording systems, digital camera systems, image sensors, and related components preferred (nice to have), • Experience with design or testing for aerospace systems to military or spaceflight standards preferred., • Fluency in concept design, circuit design, schematic capture, and PCB layout tools (e.g., Altium Designer, Cadence)., • Experience with high-speed interfaces such as MIPI, SLVS, USB, Ethernet, and HDMI., • Demonstrated ability to analyze and debug high speed, and complex electronic systems, utilizing tools such as oscilloscopes, logic analyzers, and protocol analyzers., • Solid understanding of embedded systems, firmware development, and software-hardware integration., • Leadership skills and the ability to work effectively in a team-oriented environment., • Fast paced, energetic startup culture, where you'll learn a lot, have great impact, and have fun doing it, • Base salary $130- $220k, depending on experience, • Bonus, 401k, Health Care Plan (Medical, Dental & Vision), • Unlimited Paid Time Off (with prior approval), for Vacation, Sick & Public Holidays, Maternity, Paternity, • Possible Stock Option Plan participation, based on performance and tenure.

Job Description SPEC Services, Inc. is a premier firm in Electrical and Control Systems engineering and is seeking a self-motivated and energetic applicant to apply for an Electrical & Control Systems Designer position in Southern California. About the Position In this position, you will apply your knowledge of the principles of electrical & control systems design to: • Support a project Electrical & Control Systems Design Lead in developing industrial construction drawings, including single line diagrams, area classification diagrams, grounding, lighting, conduit/cable tray, schematics and wiring diagrams, cable/conduit schedules, installation details, PLC panel layout and I/O schematics, loop diagrams and control system architecture. Responsibilities Your core duties and responsibilities may require you to do the following: • Support an Electrical & Control Systems Design Lead on large and complex projects, • Perform site visits to gather field data and verify existing facilities and project requirements, • Use software tools to perform design calculations such as cable tray sizing, conduit sizing, duct bank sizing, voltage drops, etc., • Develop construction drawings and material requirements, • Prioritize and manage multiple tasks/projects with various due dates. Attend coordination and status meetings, • Strong verbal and written communication skills are required., • Strong proficiency with AutoCAD is required., • Desire and ability to learn new skills and assume greater responsibilities is required., • Proficiency with additional 3D Design software, including Civil 3D, Plant 3D and AVEVA E3D is strongly preferred., • Proficiency with MicroStation is preferred., • Working experience with electrical construction is preferred., • General knowledge of the use of concrete and structural steel in the design of structures., • Knowledge of seismic and wind design provisions in the IBC/CBC, ASCE 7, AISC and ACI codes., • Ability to visit local project sites for data gathering and inspections with occasional travel to farther locations is required., • 2+ years of experience in industrial electrical and/or control system design is required., • Energy infrastructure experience is preferred., • Engineering consulting experience is preferred., • Familiarity with NEC and API 500 is preferred., • Formal training in electrical and control system design is preferred. Trade school or associates degree is preferred, or equivalent experience.

Job Description 2+ years of applicable experience In-office position at our Tustin, CA location Salary range: $40k+ (depending upon relevant design/drafting experience) This position requires a demonstrated experience using AutoCAD to produce and edit system architecture diagrams, PLC panel and SCADA panel layout drawings, single line diagrams, control & protection diagrams, AC schematic diagrams, elementary diagrams, DC schematic diagrams, cable schedules, wiring diagrams, interconnection diagrams, P&IDs, and ISA loop diagrams. Candidates who possess a demonstrated ability to read and understand electrical drawings and related documents, multitask as well as work autonomously, are preferred. A working design knowledge of NFPA 70 (NEC) and NESC standards is beneficial, but not required. Potential candidates will be invited to an in-office, hands-on CAD skills interview at our Tustin, CA location. Company DescriptionOur engineering team is looking for highly-motivated employees who are problem-solvers, self-starters, excellent communicators, and enjoy learning and working in a collaborative team environment!Our engineering team is looking for highly-motivated employees who are problem-solvers, self-starters, excellent communicators, and enjoy learning and working in a collaborative team environment!

Job Description ICT Designer - Mission Critical HED is looking to add a talented person to our ICT team. The ICT Designer builds on foundational design knowledge to contribute to the execution of complex mission critical technology infrastructure projects. About HED We are a team that is full of ideas, experience, creativity, passionate opinions, insatiable curiosity, uncompromising integrity, commitment, and skill. Our culture is about aspiration, embracing change and challenges, listening to (and learning from) each other, encouraging continual learning, and inspiring collective growth. As an inclusive, integrated architecture and engineering practice, we value the diversity of perspectives, experiences, abilities, and expertise that advance both the work we do, and the world we share. Position Summary This role emphasizes developing expertise in systems such as structured cabling and security while deepening coordination capabilities and technical acumen. Essential Functions: • Perform basic calculations for conduit fill, cabling distances, and equipment loads with limited oversight., • Collaborate with project engineers and architects to coordinate technology system layouts with building design., • Contribute to redline markups and assist in delegating documentation tasks., • Participate in QA/QC reviews and resolve technical or graphical issues in documentation., • Review and edit specifications under the guidance of project engineers., • Attend project meetings and site visits to support coordination and client interaction, • Manage assigned project hours and report progress to team leads., • Engage in HED’s Design Work Planning (DWP) process and estimate time required for task completion.Requirements, • Bachelor’s degree in Electrical Engineering, Information Technology, Architectural Engineering, or related field, or equivalent relevant experience., • 2+ years of experience in technology infrastructure design or a related AEC discipline is required., • RCDD certification is greatly preferred., • Proficient in Revit; experience with AutoCAD, Bluebeam, and Microsoft Office., • Familiarity with standards such as BICSI, EIA/TIA, and NEC., • Strong organizational and communication skills., • Self-motivated with a collaborative mindset and enthusiasm for innovation.Physical Requirements, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to effectively communicate in writing and verbally via phone, video conferencing, and in-person.